-
Shelf with Pole kit small diameter– Flexi InstallationProduct
No: CD 899035Function: Shelf for pole diameter 25mm to 120mm
Application: Light weight flexi support shelf for four FLEXI
MODULES with pp g g ppoptional bracket for FSEC-boxes.
Product Data:
Assembled Size: 400 x 450 x 650 (LxWxH)Weight: 18.2 kgPacking
size: 600 x 200 x 150Packing size: 600 x 200 x 150Additional info:
See installation manual for additional information
Box 10 | SE-915 21 ROBERTSFORS | SWEDEN Telephone: +46 934 153
10 | Fax: +46 934 150 72 | [email protected]
www.cuedee.se
Quality Design
All Enquiries:tel: +44 (0)1744 762 929
email: [email protected]: www.etechcomponents.com
-
INSTALLATION INSTRUCTION
Name of Document Document No. Release No. Earlier release:
Installation Instruction CD 899035 II899035 1 Prepared by Checked
by Date Valid from Mats Lindberg Peter Brandt 2009-09-28
www.cuedee.se
1/3
Installation Instruction
Contents Page:
1. Product Covered in this Installation Instruction.
.......................................................... 1 2.
Tool requirement for assembly
.....................................................................................
1 3. Assembly
......................................................................................................................
2 4. Technical Data.
.............................................................................................................
3
1. Product Covered in this Installation Instruction. This
Installation Instruction covers Flexi Installation Shelf with Pole
kit small diameter drawing number CD 899035, an all aluminum
support used for outdoor installations of 1-4 flexi modules with
optional FSEC mounting.
.
2. Tool requirement for assembly 2 x 19mm wrench All
Enquiries:
tel: +44 (0)1744 762 929email: [email protected]
web: www.etechcomponents.com
-
INSTALLATION INSTRUCTION
Name of Document Document No. Release No. Earlier release:
Installation Instruction CD 899035 II899035 1 Prepared by Checked
by Date Valid from Mats Lindberg Peter Brandt 2009-09-28
www.cuedee.se
2/3
3. Assembly For detailed component information see attached
drawings. The shelf can be mounted with either short or long side
against the pole. Installer may prefer long side installations on
high installations. Short side
1. Assemble aluminum beams and angles into a rectangular base
frame.
2. Mount Clamp Pos 1 on frame short side (long side may be
preferred on high
installations).
-
INSTALLATION INSTRUCTION
Name of Document Document No. Release No. Earlier release:
Installation Instruction CD 899035 II899035 1 Prepared by Checked
by Date Valid from Mats Lindberg Peter Brandt 2009-09-28
www.cuedee.se
3/3
3. Assemble stays and Clamp Pos 2 4. Insert locking pins Pos 10
to secure the stays. 5. OPTIONAL: Assemble bracket for FSEC-boxes
6. Mount on tube, max distance between clamps 300 mm. 7. Mount
FLEXI PLINTH and maximum four FLEXI MODULES
Long side
1. Assemble aluminum beams and angles into a rectangular base
frame. 2. Mount Clamp Pos 1 on frame long side (short side may be
preferred on low
installations).
3. Assemble brackets and stays on the frame 4. Assemble Clamp
Pos 2 5. OPTIONAL: Assemble bracket for FSEC-boxes 6. Mount on tube
7. Mount FLEXI PLINTH and maximum four FLEXI MODULES
4. Technical Data.
4.1. Shipping Details.
DENOMINATION Shipping Size (mm) Shipping Weight (kg) Net Weight
(kg) Length x Width x Height
CD 899035 600 x 200 x 150 18.2 17.9
4.2. Surface Treatment. Bolts: Acid proof Stainless Steel, A4
Aluminium Details: Natural anodised 20 microns.
All Enquiries:tel: +44 (0)1744 762 929
email: [email protected]: www.etechcomponents.com
-
A
B
C
D
1 2 3 4
E
5 76 8
FSIZE DWG. NO. REV
FILE NAME:
SCALE: WEIGHT: SHEET OF
Box 10SE-915 21 Robertsfors
SWEDENwww.cuedee.se
PROFILE:
FINISH:
DATE NAME
DRAWN
CHECKED
APPROVED
STATUS
TITLE
COPYRIGHT - CUE DEE ALL RIGHTS RESERVED
INFORMATION IN THIS DOCUMENTIS THE EXCLUSIVE PROPERTY OF
CUE DEE. REPRODUCTION IN PART OR AS A WHOLE WITHOUTTHE WRITTEN
PERMISSION OF
CUE DEE IS PROHIBITEDCOMMENTS:
Phone: +46 934 153 10Fax: +46 934 150 72 E-mail:
[email protected]
UNLESS OTHERWISE SPECIFIEDALL DIMENSIONS IN MILLIMETER
DIMENSIONING & TOLERANCING
PER EN ISO 2768-1m
WELDING PER EN ISO 13920-AE
HOT DIP GALVANIZED
PER EN ISO 1461
C:\Documents and Settings\Administrator\My
Documents\Vault\Designs\Project\Flexi Installation Solutions\CD
899035.idw
2009-02-20
As manufactured2
A31 N/A
CD 899035
SHELF WITH POLE KIT SMALL DIAMETER
P.P
Pending
MATERIAL:
450
300
550
CLAMP Ø25-120
ALTERNATIVE MOUNTING
-
A
B
C
D
1 2 3 4
E
5 76 8
FSIZE DWG. NO. REV
FILE NAME:
SCALE: WEIGHT: SHEET OF
Box 10SE-915 21 Robertsfors
SWEDENwww.cuedee.se
DATE NAME
DRAWN
CHECKED
APPROVED
STATUS
TITLE
COPYRIGHT - CUE DEE ALL RIGHTS RESERVED
INFORMATION IN THIS DOCUMENTIS THE EXCLUSIVE PROPERTY OF
CUE DEE. REPRODUCTION IN PART OR AS A WHOLE WITHOUTTHE WRITTEN
PERMISSION OF
CUE DEE IS PROHIBITEDCOMMENTS:
Phone: +46 934 153 10Fax: +46 934 150 72 E-mail:
[email protected]
C:\Documents and Settings\Administrator\My
Documents\Vault\Designs\Project\Flexi Installation Solutions\CD
899035.idw
2009-02-20
2 A3
2 N/ACD 899035
SHELF WITH POLE KIT SMALL DIAMETER
P.P
Pending
TIGHTENING TORQUES (Nm)THREAD
SIZE 8.8 A4PROPERTY CLASSES
M8M10M12
M20M16
M24
M30
224476
629
187364
1240
26
87211
50
412
1402
712M27 1028 909
DIN 11024LÅSSPRINT LSA Ø20-30210 DIN 985LOCK NUT LM M12 A429 DIN
934NUT M6M M12 A448 DIN 125WASHER BRB M12 A467 DIN 975THREADED ROD
HGS M12x460 A416 DIN 933BOLT M6S M12x40H A4-8025 PLATE CD
899030-20024 FRAME CD 899030-10013 CUEDEE CLAMP WITH LONG BACK
PROFILE CD 877012 CUEDEE CLAMP CD 877011
SUPPLIERSTANDARDDESCRIPTIONREVPART NUMBERQTYITEM
3
87
4
79
5
6
2
1
10
