Shen, Jianxin 沈建新 - IEEE Industry Applications Societyias.ieee.org/images/files/Elections/2016/SHEN-bio.pdf · Shen, Jianxin 沈 ... See notes in Appendix-B ... Special Electrical

CV of Prof. Jian-Xin SHEN

Shen, Jianxin 沈建新

PhD, IET Fellow, IEEE Senior Member

Professor, Department Head

Department of Electrical Engineering

Zhejiang University, China

1. Personal Data

Date of birth: 6 November, 1969

Gender: Male

Nationality: Chinese

Address: Room 308, Lecture Building 2, 38 Zheda Road, Hangzhou, 310027, China

Tel: +86-571-87953094(O) / +86-135-16720885(M)

Fax: +86-571-87951625

Email: [email protected]

URL: http://mypage.zju.edu.cn/en/jxs

2. Qualifications

PhD: 1994-1997, Zhejiang University, China, degree awarded in October 1997

MSc: 1991-1994, Xi’an Jiaotong University, China, degree awarded in June 1994

BEng: 1987-1991, Xi’an Jiaotong University, China, degree awarded in July 1991

IEEE: Member (1998-2002), Senior Member (since 2002)

IEE/IET: Member (2003-2014), Fellow (since 2014)

3. Employment Experience

2004-present: Professor, Zhejiang University, China

2002-2004: Research Engineer, IMRA Europe SAS, UK Research Centre, UK, a research center

associated with Aisin Seiki, Japan

1999-2002: Research Associate (meanwhile working towards a second PhD degree, the degree

awarded in July 2003), Sheffield University, UK

1997-1999: Post-Doctoral Fellow, Nanyang Technological University, Singapore

4. Research Interests

Electrical Machine Topologies, Motor Drives, Motion Control, and Applications

Renewable and Sustainable Energy Technologies

See Appendix-A for details of recent research topics and industry applications

5. Creativity

201 technical papers published on international and Chinese journals and conferences, receiving

1 Prize Paper Award from IEEE Industry Applications Society

5 Best Paper / Excellent Presentation Awards from international conferences

3 plenary talks and keynote speech on international conferences

See Appendix-B for details of publications

37 Chinese patents

See Appendix-C for a list of approved patents


6. Repute

Recipient of 6 international paper awards, speaker of 3 plenary talks and keynote speech on

international conferences

See notes in Appendix-B

Activities at international and national conferences/forums:

General chairman of 2 international conferences

Technical Program Committee chairman of 1 international conference

International Steering Committee member of 4 international conferences

International Advisory Board/Committee member of 6 international conferences

Member/cochairman of Technical Program Committee, Scientific Committee, and

International Publicity Committee, Program Chair, Track Chair or Topic Chair of 23

international conferences

Session chair of 13 international conferences

Special session organizer and winner of Best Special Session of 1 international conference

General secretary of 2 Chinese national forums

See details in Appendix-D

Specialist advisor / leader at 7 government-supported research bodies and academic societies

See details in Appendix-E

Referee of 3 international/overseas research foundation and technical award, and 10 Chinese

research foundations, technical awards and evaluation platform

See details in Appendix-F

Reviewer of 32 international journals, 22 Chinese journals, and 22 international conferences

See details in Appendix-G

Editorial Board member of 8 international journals and 2 Chinese journals, and guest editor of

special section/issue of 2 international journals and 1 Chinese journal

See details in Appendix-H

7. Industry Service

Consultant of 8 Chinese companies

See details in Appendix-I for major projects and products of consultancy

Principal Investigator of industry projects with research grants and funding of 10+ million CNY

(note, 1 CNY is approximate equivalent to 0.16 USD), and Co-investigator with 19+ million CNY,

since May 2004 at Zhejiang University

See details in Appendix-J for some examples of industry R&D projects

8. Leadership and Responsibility

@ Zhejiang University, Hangzhou, China:

Dean Assistant (2012-2014), College of Electrical Engineering

Head (2009-present), Department of Electrical Engineering

Vice Director (2006-2009) / Director (2009-present), Institute of Aerospace and Special Electrical

Machines

Leader (2007-present), Research Group of Aerospace, Special Electrical Machines and Drives

See details in Appendix-K for details

@ IMRA Europe S.A.S., UK Research Centre, Brighton, UK:

Leader (2002-2004), Research Project of High Speed Permanent Magnet Machines and Control

Systems, Research Project of High Speed Solid Rotor Induction Motors

@ University of Sheffield, Sheffield, UK:


Co-investigator (1999-2002), Research Project of Ultra-high Speed Brushless DC Machines,

Research Project of Sensorless Control of Permanent Magnet Brushless DC Machines and

Synchronous Machines

@ Nanyang Technological University, Singapore:

Founding Co-investigator (1997-1999), Artificial Heart Research Project

9. Lectures and Students Supervision

6 annual courses at Zhejiang University since 2005

Supervision of 50+ PhD and MSc/MPhil/MEng students, and 120+ undergraduate students

See details in Appendix-L

10. Seminars and National Conference/Symposium Keynote Speeches

11 seminars for other universities/institutes and industries

13 keynote speeches for national conferences/symposiums

See details in Appendix-M

Latest update: 28 May, 2016

Appendix A. Research Topics and Industry Applications

Appendix-A. Research Topics and Industry Applications

[High-Speed Electrical Machines]

(1) small power machines: <10 kW, >100 krpm

(2) small to moderate power machines: 10~100 kW, 50~100 krpm

(3) moderate power machines: 100~300 kW, 10~60 krpm

Application examples: electric assisted turbo chargers for internal combustion engines, spindles, high-speed

high-efficiency fans, air compressors, air conditioner compressors for airplanes, fly wheel energy storage

[Low-Speed Electrical Machines]

(1) low-speed servo motors: <5 rpm

(2) high-torque machines: >1000 Nm

Application examples: robotics, oil field pumps

[Control of Permanent Magnet Machines and Drives]

(1) sensorless control

(2) fuzzy logic control

(3) field-weakening control

(4) direct torque control

(5) direct voltage control

Application examples: air conditioner compressors, servo systems, EV traction motors, wide speed range

permanent magnet ac generator systems

[Novel Permanent Magnet Machine and Synchronous Reluctance Machine Topologies]

(1) flux switching machines

(2) multi power-terminals machines

(3) field modulated machines

(4) synchronous reluctance machines

(5) soft magnetic composite (SMC) 3-dimensional machines

(6) machines for extraordinary environment and special application with unique configurations

Application examples: wide speed range PM motors, dual-rotor washing machine motors, oil field pump motors,

domestic-application air conditioner motors, pump and fan-application motors, aerospace-application motors

[Superior Performance Induction Machines]

(1) optimal electromagnetic design

(2) magnetic materials and machine performance investigation

(3) manufacture process and machine performance investigation

Application examples: IE3 and IE4 high-efficiency induction motors, inverter-fed induction motors

[Electromagnetic Transmission of Mechanical Power]

(1) magnetic gears

(2) magnetic couplings

(3) magnetic clutches

Application examples: washing machines, locking mechanism

Appendix A. Research Topics and Industry Applications

[Linear Machines and Control Systems]

(1) permanent magnet doubly-salient linear machines

(2) linear induction motors

Application examples: sliding doors, wood processing machines

[Energy Harvesting]

(1) oscillation generator

(2) thermal battery utilities

Application examples: power supply for remote sensors, battery chargers

[Renewable and Sustainable Energies]

(1) small power wind generator systems

(2) wide speed range permanent magnet ac generator systems with voltage stabilization of both ac and dc

terminals

(3) high-speed permanent magnet ac generator systems

Application examples: wind energy, energy recycling of engine exhaust gas

[Transportation Motor Systems]

(1) traction motor drives

(2) electric power steering (EPS) motors and controllers

Application examples: EV and HEV

[Power Electromagnetic Technology]

(1) power magnetic pulse generators

Application examples: electromagnetic sterilization

Appendix B. Publications

Appendix-B. Publications

[Book]

2015 Member of Specialist Board and co-author, Report on Advances in Electrical Engineering, China Science and Technology Press, ISBN:

978-7-5046-6534-8/TM.33, 2014

[Papers Published on International Journals and Conferences]

134 D. M. Miao, Y. Mollet, J. X. Shen, and J. Gyselinck, Direct Voltage Field-Oriented Control for Permanent-Magnet Synchronous

Generator Systems with Active Rectifier, Proceedings of the 2016 IEEE International Energy Conference (ENERGYCON2016),

ISBN: 978-1-4673-8463-6, 4-8 April, 2016, Leuven, Belgium, file:

Miao-Direct_Voltage_Field-Oriented_Control_for_Permanent-Magnet_Synchronous_Generator_Systems_with_an_Active_a1200.pdf

133 G. Y. Zhou, H. Hao*, M. J. Jin, and J. X. Shen, Influence of Interlocking Dowels on Motor Core Loss, COMPEL: The International

Journal for Computation and Mathematics in Electrical and Electronic Engineering, ISSN: 0332-1649, Vol. 35, No. 2, pp. 808-820

132 S. Cai, M. J. Jin*, H. Hao, and J. X. Shen, Comparative Study on Synchronous Reluctance and PM Machines, COMPEL: The

International Journal for Computation and Mathematics in Electrical and Electronic Engineering, ISSN: 0332-1649, Vol. 35, No. 2, pp.

607-623

131 D. M. Miao, S. Wang, and J. X. Shen*, Linear Induction Motor Drive for Woodworking Machine Application, (extended from

ICEMS2014 paper), COMPEL: The International Journal for Computation and Mathematics in Electrical and Electronic Engineering,

ISSN: 0332-1649, Vol. 35, No. 2, pp. 670-682

130 J. X. Shen, S. Cai, J. Yuan, S. Cao, and C. W. Shi*, Cogging Torque in SPM Machine with Segmented Stator, (extended from

ICEMS2014 paper), COMPEL: The International Journal for Computation and Mathematics in Electrical and Electronic Engineering,

ISSN: 0332-1649, Vol. 35, No. 2, pp. 641-654

129 J. X. Shen, D. M. Miao, and M. J. Jin, Control Strategies for Variable-Speed Permanent Magnet Synchronous Generator Systems,

(extended from EVER2015 paper), COMPEL: The International Journal for Computation and Mathematics in Electrical and Electronic

Engineering, ISSN: 0332-1649, Vol. 34, No. 6, pp. 1845-1862, DOI: 10.1108/COMPEL-05-2015-0203

128 Y. T. Tan, J. X. Shen*, M. J. Jin, and H. Hao, Study of Magnet Fatigue in Hybrid PM Memory Motors, Proceedings of the 2015

International Conference on Sustainable Mobility Applications, Renewables and Technology (SMART2015), ISBN:

978-1-4673-9529-8, 23-25 November, 2015, Kuwait, file SMART15-113.pdf

127 J. X. Shen*, G. Y. Zhou, S. L. Jin, and H. Hao, Analysis of Iron Loss in Interlocked Lamination Core, Proceedings of the 2015


978-1-4673-9529-8, 23-25 November, 2015, Kuwait, file SMART15-110.pdf

126 J. X. Shen*, S. Cai, H. Shao, and H. Hao, Evaluation of Low-Cost High-Performance Synchronous Motors for Ventilation

Application, Proceedings of the 2015 International Conference on Sustainable Mobility Applications, Renewables and Technology

(SMART2015), ISBN: 978-1-4673-9529-8, 23-25 November, 2015, Kuwait, file SMART15-108.pdf

125 G. Y. Zhou, and J. X. Shen*, Rotor Notching for Electromagnetic Noise Reduction of Induction Motors, Proceedings of the 2015


978-1-4673-9529-8, 23-25 November, 2015, Kuwait, file SMART15-78.pdf, Best Paper Award

124 J. X. Shen*, W. Sun, and X. Q. Huang, A DC Link Switch-Based Common Mode Voltage Reduction Scheme in PWM Inverter Drives,

Proceedings of the 2015 International Conference on Sustainable Mobility Applications, Renewables and Technology (SMART2015),

ISBN: 978-1-4673-9529-8, 23-25 November, 2015, Kuwait, file SMART15-77.pdf

123 G. Y. Zhou, and J. X. Shen, Current Harmonics in Induction Machine with Closed-Slot Rotor, Proceedings of the 2015 IEEE 2nd

International Future Energy Electronics Conference (IFEEC2015), ISBN: 978-1-4799-7657-7, 1-4 November, 2015, Taipei, Taiwan

China, file 290085_FP.pdf

122 Q. F. Lu, Y. Y. Ye, J. X. Shen, and J. Zhang, Research on Stereo-garage Driven by Linear Induction Motor, Proceedings of the 2015

International Symposium on Linear Drives and Industry Applications (LDIA2015), 27-29 July, 2015, Aachen, Germany, file

Lu-Research on Stereo-garage Driven by Linear Induction Motor.pdf

121 D. M. Miao, and J. X. Shen*, Direct Voltage Control Strategies for Variable-Speed Permanent Magnet Synchronous Generator System,

Proceedings of 2015 10th International Conference and Exhibition on Ecological Vehicles and Renewable Energies (EVER2015),

ISBN: 978-1-4673-6784-4, March 2015, Monaco, file EVER15-197.pdf

120 B. Xia, J. X. Shen, P. C. K. Luk, and W. Z. Fei, Comparative Study of Air-Cored Axial Flux Permanent Magnet Machines with

Different Stator Winding Configurations, IEEE Trans. Industrial Electronics, ISSN: 0278-0046, Vol. 62, No. 2, February 2015, pp.

846-856, DOI: 10.1109/TIE.2014.2353012

119 J. X. Shen*, and D. M. Miao, Machine Design and Control Strategy for Wide-Speed-Range PMSG Systems, (extended from

EVER2013 paper), COMPEL: The International Journal for Computation and Mathematics in Electrical and Electronic Engineering,

ISSN: 0332-1649, Vol. 34, No. 1, January 2015, pp.92-109, DOI: 10.1108/COMPEL-03-2014-0054

118 Y. Zhou, Y. C. Soh*, and J. X. Shen, High-Gain Observer with Higher Order Sliding Mode for State and Unknown Disturbance

Estimations, International Journal of Robust and Nonlinear Control, ISSN: 1049-8923, E-ISSN: 1099-1239, Vol. 24, No. 15, October

2014, pp. 2136-2151, DOI: 10.1002/rnc.2982

117 S. Wang, D. M. Miao, and J. X. Shen*, Optimal Design of a Linear Induction Motor for Woodworking Machine Application,

Proceedings of 2014 International Conference on Electrical Machines and Systems (ICEMS2014), ISBN: 978-1-4799-5161-1, 22-25

October, 2014, Hangzhou, China, pp. 3633-3637, file LS6F2.pdf


116 H. Y. Li and J. X. Shen*, Optimal Design of an Axial Flux Permanent Magnet Motor, Proceedings of 2014 International Conference on

Electrical Machines and Systems (ICEMS2014), ISBN: 978-1-4799-5161-1, 22-25 October, 2014, Hangzhou, China, pp. 3350-3355,

file LS5B2.pdf, Best Paper Award

115 H. Hao*, J. X. Shen, C. Yuan, and Q. Qu, Influences of Machine Structure on High Speed PM BLDC Motor, Proceedings of 2014

International Conference on Electrical Machines and Systems (ICEMS2014), ISBN: 978-1-4799-5161-1, 22-25 October, 2014,

Hangzhou, China, pp. 3309-3312, file LS5A1.pdf

114 W. Sun, J. X. Shen*, K. Wang, and M. J. Jin, Hybrid Motor Control Application with Moving Average Based Low-Pass Filter and

High-Pass Filter, Proceedings of 2014 International Conference on Electrical Machines and Systems (ICEMS2014), ISBN:

978-1-4799-5161-1, 22-25 October, 2014, Hangzhou, China, pp. 3123-3130, file LS4A3.pdf

113 J. Li, and J. X. Shen*, Influence of Mechanical Parameters on Power Efficiency of Induction Motors, Proceedings of 2014

International Conference on Electrical Machines and Systems (ICEMS2014), ISBN: 978-1-4799-5161-1, 22-25 October, 2014,

Hangzhou, China, pp. 2555-2560, file LS1B5.pdf

112 J. Yuan, C. W. Shi, and J. X. Shen, Analysis of Cogging Torque in Surface-Mounted Permanent Magnet Machines with Segmented

Stators, Proceedings of 2014 International Conference on Electrical Machines and Systems (ICEMS2014), ISBN: 978-1-4799-5161-1,

22-25 October, 2014, Hangzhou, China, pp. 2513-2516, file LS1A3.pdf

111 L. L. Wang, M. J. Jin, J. X. Shen, Z. H. Huang, and J. Wang, Design of a High-Performance Linear Permanent Magnet Gear,

Proceedings of 2014 International Conference on Electrical Machines and Systems (ICEMS2014), ISBN: 978-1-4799-5161-1, 22-25

October, 2014, Hangzhou, China, pp. 2324-2326, file DS5H3-13.pdf

110 Z. C. Sun, J. X. Shen*, M. J. Jin, and H. Hao, Research of the Influence of Different PWM Inverters on the Iron Losses for Induction

Motors, Proceedings of 2014 International Conference on Electrical Machines and Systems (ICEMS2014), ISBN: 978-1-4799-5161-1,

22-25 October, 2014, Hangzhou, China, pp. 96-100, file DS1H2-4.pdf

109 J. X. Shen, K. Wang, D. Shi, C. F. Wang, and M. J. Jin*, Optimal Design of Low-Cost IPM AC Motor, (extended from EVER2012

paper), COMPEL: The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, ISSN:

0332-1649, Vol. 33, No. 5, September 2014, pp.1587-1598, DOI: 10.1108/COMPEL-09-2013-0292, URL:

http://dx.doi.org/10.1108/COMPEL-09-2013-0292

108 J. X. Shen, D. Shi, C. F. Wang, P. Li, K. Wang, and M. J. Jin*, Torque Ripple Analysis for IPM AC Motors, (extended from EVER2012


0332-1649, Vol. 33, No. 5, September 2014, pp.1514-1526, DOI: DOI 10.1108/COMPEL-09-2013-0294, URL:

http://dx.doi.org/10.1108/COMPEL-09-2013-0294

107 W. Z. Fei, P. C. K. Luk, D. M. Miao, and J. X. Shen*, Investigation of Torque Characteristics in a Novel Permanent Magnet Flux

Switching Machine with an Outer-Rotor Configuration, IEEE Trans. Magnetics, ISSN: 0018-9464, Vol. 50, No. 4, Part-2, April 2014,

pp. 8100810/1-10, DOI: 10.1109/TMAG.2013.2288219

106 Y. Zhou*, Y. C. Soh, and J. X. Shen, Speed Estimation and Nonmatched Time-Varying Parameter Identification for a DC Motor with

Hybrid Sliding-Mode Observer, IEEE Trans. Industrial Electronics, ISSN: 0278-0046, Vol. 60, No. 12, December 2013, pp.

5539-5549, DOI: 10.1109/TIE.2012.2228140

105 P. Li, J. X. Shen*, W. Sun, and Y. Zhang, Investigation of LSPMSM with Unevenly Distributed Squirrel Cage Bars, Proceedings of

2013 International Conference on Electrical Machines and Systems (ICEMS2013), 26-29 October, 2013, Busan, Korea, pp. 24-27, file

SMD-0550.pdf, DOI: 10.1109/ICEMS.2013.6754529

104 Y. Zhang, J. X. Shen, and P. Li, Optimal Design of an Interior Permanent Magnet Synchronous Motor for Electrical Vehicle

Applications, Proceedings of 2013 International Conference on Electrical Machines and Systems (ICEMS2013), 26-29 October, 2013,

Busan, Korea, pp. 982-985, file PMDC-2555.pdf

103 J. X. Shen*, P. Li, M. J. Jin, and G. Yang, Investigation and Countermeasures for Demagnetization in Line Start Permanent Magnet

Synchronous Motors, (extended from MMM/Intermag2013), IEEE Trans. Magnetics, ISSN: 0018-9464, Vol. 49, No. 7, July 2013, pp.

4068-4071, DOI: 10.1109/TMAG.2013.2244582

102 J. X. Shen*, H. Hao, M. J. Jin, and C. Yuan, Reduction of Rotor Eddy Current Loss in High Speed PM Brushless Machine by

Grooving Retaining Sleeve, (extended from MMM/Intermag2013), IEEE Trans. Magnetics, ISSN: 0018-9464, Vol. 49, No. 7, July

2013, pp. 3973-3976, DOI: 10.1109/TMAG.2013.2243408

101 Y. C. Wang, S. L. Ho, W. N. Fu*, and J. X. Shen, A Novel Rotor Position Detection Method for Sensorless Control of

Magnetic-Geared Permanent-Magnet Brushless Motor, (extended from MMM/Intermag2013), IEEE Trans. Magnetics, ISSN:

0018-9464, Vol. 49, No. 7, July 2013, pp. 3961-3964, DOI: 10.1109/TMAG.2013.2239616

100 W. Sun, J. X. Shen, P. Li, and K. Wang, Iron Core Hysteresis-Based Position Sensorless Control of PM Brushless DC Motors,

Proceedings of the 2013 International Symposium on Linear Drives and Industry Applications (LDIA2013), 7-10 July, 2013,

Hangzhou, China, CD ROM file ID497.pdf, Proceedings also published on Applied Mechanics and Materials, Vol. 416-417, Sept.

2013, pp. 583-588, DOI: 10.4028/www.scientific.net/AMM.416-417.583

99 J. X. Shen, and W. Z. Fei, Permanent Magnet Flux Switching Machines – Topologies, Analysis and Optimization, Proceedings of the

2013 International Conference on Power Engineering, Energy and Electrical Drives (IEEE-POWERENG2013), 13-17 May 2013,

Istanbul, Turkey, file Paper722.pdf, Keynote Speech

98 D. M. Miao, and J. X. Shen, Comparative Study on Permanent Magnet Synchronous Generator Systems with Various Power

Conversion Topologies, Proceedings of the 2013 International Conference on Power Engineering, Energy and Electrical Drives

(IEEE-POWERENG2013), 13-17 May 2013, Istanbul, Turkey, file Paper704.pdf

97 J. X. Shen*, C. F. Wang, P. C. K. Luk, D. M. Miao, D. Shi, and C. Xu, A Shoe-Equipped Linear Generator for Energy Harvesting,

IEEE Trans. Industry Applications, ISSN: 0093-9994, Vol. 49, No. 2, March 2013, pp. 990-996, DOI: 10.1109/TIA.2013.2244193

96 D. M. Miao*, J. X. Shen, and D. Shi, Permanent Magnet Synchronous Generators with Various Designs and Control Strategies,

Proceedings of 2013 Eighth International Conference and Exhibition on Ecological Vehicles and Renewable Energies (EVER2013),

ISBN: 978-1-4673-5271-0, 978-1-4673-5269-7, March 2013, Monaco, CD ROM file EVER13-paper-139.pdf

95 J. X. Shen*, H. Hao, C. F. Wang, and M. J. Jin, Sensorless Control of IPMSM Using Rotor Flux Observer, (extended from EVER2011



0332-1649, Vol. 32, No. 1, January 2013, pp.166-181, DOI: 10.1108/03321641311293812, URL:

http://dx.doi.org/10.1108/03321641311293812 or http://www.emeraldinsight.com/journals.htm?articleid=17076626

94 J. X. Shen, P. Li, M. J. Jin, and G. Yang, Investigation and Countermeasures for Demagnetization in Line Start Permanent Magnet

Synchronous Motors, 12th Joint MMM/Intermag Conference (MMM/Intermag2013), January 2013, Chicago, USA, Abstract Book, p.

749

93 J. X. Shen, H. Hao, and M. J. Jin, Reduction of Rotor Eddy Current Loss in High Speed PM Brushless Machine by Grooving Retaining

Sleeve, 12th Joint MMM/Intermag Conference (MMM/Intermag2013), January 2013, Chicago, USA, Abstract Book, pp. 526-527

92 C. F. Wang, and J. X. Shen, Preliminary Study on a 3D Field Permanent Magnet Flux Switching Machine – from Tubular to Rotary

Configurations, Journal of International Conference on Electrical Machines and Systems, ISSN: 2234-6902, eISSN: 2234-7577, Vol. 1,

No. 4, December 2012, pp. 505-508 (electronic version), 109-112 (print version)

91 Y. C. Wang , S. L. Ho , W. N. Fu* , and J. X. Shen, A Novel Brushless Doubly Fed Generator for Wind Power Generation, IEEE Trans.

Magnetics, ISSN: 0018-9464, Vol. 48, No. 11, November 2012, pp. 4172-4175, DOI: 10.1109/TMAG.2012.2201253

90 D. M. Miao, and J. X. Shen*, Simulation and Analysis of a Variable Speed Permanent Magnet Synchronous Generator with Flux

Weakening Control, Proceedings of the 1st International Conference on Renewable Energy Research and Applications (ICRERA2012),

ISBN: 978-1-4673-2328-4, November 2012, Nagasaki, Japan, CD ROM file p296.pdf, Advisor of Excellent Student Presentation

Award

89 W. Fei, P. C. K. Luk, and J. X. Shen*, Torque Analysis of Permanent-Magnet Flux Switching Machines with Rotor Step Skewing,

IEEE Trans. Magnetics, ISSN: 0018-9464, Vol. 48, No. 10, October 2012, pp. 2664-2673, DOI: 10.1109/TMAG.2012.2198223

88 W. Fei*, P. C. K. Luk, J. X. Shen, Y. Wang, and M. J. Jin, A Novel Permanent Magnet Flux Switching Machine with an Outer-Rotor

Configuration for In-Wheel Light Traction Applications, IEEE Trans. Industry Applications, ISSN: 0093-9994, Vol. 48, No. 5,

September/October 2012, pp. 1496-1506, DOI: 10.1109/TIA.2012.2210009

87 D. M. Miao*, Y. Perriard, M. Markovic, P. Germano, and J. X. Shen, Thermal Modeling of a BLDC Motor for a Kick Scooter,

Proceeding of the 2012 IEEE International Symposium on Industrial Electronics (ISIE2012), ISBN: 978-1-4673-0158-9, May 2012,

Hangzhou, China, pp.764-769

86 K. H. Ji*, and J. X. Shen, Low Speed Servo System with Second-Order Sliding Mode Algorithm, Proceeding of the 2012 IEEE

International Symposium on Industrial Electronics (ISIE2012), ISBN: 978-1-4673-0158-9, May 2012, Hangzhou, China, pp.686-691

85 C. F. Wang, and J. X. Shen*, A Method To Segregate Detent Force Components in Permanent Magnet Flux-Switching Linear

Machines, IEEE Trans. Magnetics, ISSN: 0018-9464, Vol. 48, No. 5, May 2012, pp. 1948-1955, DOI: 10.1109/TMAG.2011.2177852

84 C. F. Wang, M. J. Jin, J. X. Shen*, and C. Yuan, A Permanent Magnet Integrated Starter Generator for Electric Vehicle Onboard Range

Extender Application, (extended from SMM2011 paper), IEEE Trans. Magnetics, ISSN: 0018-9464, Vol. 48, No. 4, April 2012, pp.

1625-1628, DOI: 10.1109/TMAG.2011.2173469

83 P. Li, J. X. Shen, G. Yang, and D. Shi, FEM-Based Study on Diffusion of Partial Demagnetization in Permanent Magnet Motors,

Proceedings of the 2012 International Conference on Information Processing and Electrical Engineering (ICIPEE2012), ISBN:

978-9931-9068-0-9, April 2012, Tebessa, Algeria, pp.97-100

82 J. X. Shen, Design, Manufacture and Control Issues for High-Speed Permanent Magnet Brushless Machines, Proceedings of the 2012

International Conference on Information Processing and Electrical Engineering (ICIPEE2012), ISBN: 978-9931-9068-0-9, April 2012,

Tebessa, Algeria, pp.1-10, Plenary Talk

81 J. X. Shen, Permanent Magnet Flux Switching Linear Machines: Theory, Optimization and Prospective Applications, Proceedings of

2012 7th International Conference and Exhibition on Ecological Vehicles and Renewable Energies (EVER2012), March 2012, Monaco,

CD ROM file EVER12-paper-PS2.pdf, Plenary Talk

80 K. Wang, D. Shi, C. F. Wang, M. J. Jin, and J. X. Shen, Optimal Design of a Low-Cost PM Motor for Ventilation Application,

Proceedings of 2012 7th International Conference and Exhibition on Ecological Vehicles and Renewable Energies (EVER2012), March

2012, Monaco, CD ROM file EVER12-paper-SSPM07.pdf

79 D. Shi, C. F. Wang, P. Li, K. Wang, M. J. Jin, and J. X. Shen, Torque ripple analysis of an IPM ac motor, Proceedings of 2012 7th

International Conference and Exhibition on Ecological Vehicles and Renewable Energies (EVER2012), March 2012, Monaco, CD

ROM file EVER12-paper-SSPM09.pdf

78 J. X. Shen, H. Hao, M. J. Jin, and W. Z. Fei*, Sensorless High-Speed BLDC Machine Using Hardware-RFO, (extended from

EVER2010 paper), COMPEL: The International Journal for Computation and Mathematics in Electrical and Electronic Engineering,

ISSN: 0332-1649, Vol. 31, No. 1, January 2012, pp.182-190, DOI: 10.1108/03321641211184904, URL:

http://dx.doi.org/10.1108/03321641211184904

77 C. F. Wang, J. X. Shen*, P. C. K. Luk, W. Z. Fei1, and M. J. Jin, Design Issues of an IPM Motor for EPS, (extended from EVER2010


0332-1649, Vol. 31, No. 1, January 2012, pp.71-87, DOI: 10.1108/03321641211184832, URL:

http://dx.doi.org/10.1108/03321641211184832

76 Y. Zhou, Y. C. Soh, and J. X. Shen, Robust Hybrid Observer for Speed Sensorless Estimation of a DC Motor, Proceedings of The 9th

IEEE International Conference on Control & Automation (ICCA2011), ISSN: 19483449, December 2011, Santiago, Chile, pp.

784-789, DOI: 10.1109/ICCA.2011.6138096

75 C. F. Wang, J. M. Jin, and J. X. Shen*, A Permanent Magnet Integrated Starter Generator for an Onboard Range Extender Application,

20th International Conference on Soft Magnetic Materials (SMM20, SMM2011), ISSN: 0018-9464, September 2011, Kos Island,

Greece, Abstract Book p.36, DOI: 10.1109/TMAG.2011.2173469

74 L. L. Wang, J. X. Shen, and M. J. Jin, Design of a Multi-Power-Terminals Permanent Magnet Machine with Magnetic Field

Modulation, Proceedings of 2011 International Conference on Electrical Machines and Systems (ICEMS2011), ISBN-13:

9781457710445, August 2011, Beijing, China, CD ROM file PMM-21.pdf, DOI: 10.1109/ICEMS.2011.6073398

73 Y. Ming, and J. X. Shen, Research on Conducted EMI and Vibration Characteristics of PM BLDC Motors with Different Stator

Structures, Proceedings of 2011 International Conference on Electrical Machines and Systems (ICEMS2011), ISBN-13:


9781457710445, August 2011, Beijing, China, CD ROM file PE-34.pdf, DOI: 10.1109/ICEMS.2011.6073454

72 C. F. Wang, J. X. Shen, P. C. K. Luk, and M. J. Jin, A Flat Linear Generator Mounted in Shoes for Energy Harvesting, Proceedings of

2011 International Symposium on Linear Drives for Industry Applications (LDIA2011), ISBN: 978-90-386-2524-9, July 2011,

Eindhoven, Netherlands, CD ROM file 243.pdf

71 J. X. Shen, C. F. Wang, D. M. Miao, M. J. Jin, D. Shi, and Y. C. Wang, Analysis and Optimization of a Modular Stator Core with

Segmental Teeth and Solid Back Iron for PM Electric Machines, Proceedings of 2011 IEEE International Electric Machines and Drives

Conference (IEMDC2011), ISBN-13: 9781457700613, ISBN: 978-4577-0059-0, May 2011, Niagara Falls, Canada, pp. 1270-1275,

DOI: 10.1109/IEMDC.2011.5994787

70 W. Z. Fei*, P. C. K. Luk, J. X. Shen, B. Xia, and Y. Wang, Permanent-Magnet Flux-Switching Integrated Starter Generator with

Different Rotor Configurations for Cogging Torque and Torque Ripple Mitigations (extended from ECCE2010 paper), IEEE Trans.

Industry Applications, ISSN: 0093-9994, Vol. 47, No. 3, May-June 2011, pp. 1247-1256, DOI: 10.1109/TIA.2011.2125750

69 J. X. Shen, H. Hao, and C. F. Wang, Sensorless Control of Interior Permanent Magnet Synchronous Motor Using Flux Observer,


2011, Monaco, CD-ROM file EVER11-PAPER-PMAD6.pdf, Best Paper Award

68 W. Z. Fei, J. X. Shen*, C. F. Wang, and P. C. K. Luk, Design and Analysis of a New Outer-Rotor Permanent-Magnet Flux-Switching

Machine for Electric Vehicle Propulsion, (extended from EVER2009 paper), COMPEL: The International Journal for Computation and

Mathematics in Electrical and Electronic Engineering, ISSN: 0332-1649, Vol. 30, No. 1, January 2011, pp.48-61, DOI:

10.1108/03321641111091421, URL: http://dx.doi.org/10.1108/03321641111091421

67 B. Xia, M. J. Jin, J. X. Shen, and A. G. Zhang, Design and Analysis of an Air-Cored Axial Flux Permanent Magnet Generator for Small

Wind Power Application, Proceedings of 2010 IEEE International Conference on Sustainable Energy Technologies (ICSET2010),

December 2010, Kandy, Sri Lanka, CD ROM file 228.pdf

66 K. Wang, J. X. Shen, Y. C. Wang, M. J. Jin, D. Shi, and B. Xia, Modeling and Verification of a Thermoelectric Energy Scavenger,

Proceedings of 2010 IEEE International Conference on Sustainable Energy Technologies (ICSET2010), December 2010, Kandy, Sri

Lanka, CD ROM file 203.pdf

65 Y. C. Wang, D. Shi, J. X. Shen, K. Wang, and M. J. Jin, Design and Fabrication of a Linear Generator for Vibration Energy Harvesting,



64 C. F. Wang, D. M. Miao, P. C. K. Luk, J. X. Shen, C. Xu, and D. Shi, A Shoe-Equipped Linear Generator for Energy Harvesting,



63 W. Fei, P. C. K. Luk, B. Xia, Y. Wang, and J. X. Shen, Permanent Magnet Flux Switching Integrated-Starter-Generator with Different

Rotor Configurations for Cogging Torque and Torque Ripple Mitigations, Proceedings of 2010 IEEE Energy Conversion Congress and

Exposition (ECCE2010), ISSN-13: 9781424452866, September 2010, Atlanta, USA, CD-ROM file 247_0975.pdf

62 Y. Wang, M. J. Jin, J. X. Shen, W. Z. Fei, and P. C. K. Luk, An Outer-Rotor Flux-Switching Permanent Magnet Machine for Traction

Applications, Proceedings of 2010 IEEE Energy Conversion Congress and Exposition (ECCE2010), ISSN-13: 9781424452866,

September 2010, Atlanta, USA, CD-ROM file 248_1065.pdf

61 M. J. Jin, Y. Wang, J. X. Shen*, P. C. K. Luk, W. Z. Fei, and C. F. Wang, Cogging Torque Suppression in a Permanent-Magnet

Flux-Switching Integrated-Starter-Generator, IET Electric Power Applications, ISSN: 1751-8660, Vol. 4, No.8, September 2010, pp.

647-656, DOI: 10.1049/iet-epa.2009.0176

60 Y. Wang, M. J. Jin*, W. Z. Fei, and J. X. Shen, Cogging Torque Reduction in Permanent Magnet Flux-Switching Machines by Rotor

Teeth Axial Pairing, IET Electric Power Applications, ISSN: 1751-8660, Vol. 4, No. 7, July 2010, pp. 500-506, DOI:

10.1049/iet-epa.2009.0205

59 K. Wang, M. J. Jin*, J. X. Shen, and H. Hao, Study on Rotor Structure with Different Magnet Assembly in High-Speed Sensorless

Brushless DC Motors, IET Electric Power Applications, ISSN: 1751-8660, Vol. 4, No. 4, April 2010, pp. 241-248, DOI:

10.1049/iet-epa.2009.0175

58 C. F. Wang, P. C. K. Luk, J. X. Shen, W. Z. Fei, and M. J. Jin, Design Issues of an IPM BLAC Motor Used for Electric Power Steering,


2010, Monaco, CD-ROM file EVER10-paper-268.pdf

57 H. Hao, M. J. Jin, J. X. Shen, and W. Z. Fei, Sensorless Operation of High-Speed PM BLDC Machine Using Full Hardware

Rotor-Flux-Observer, Proceedings of 2010 5th International Conference and Exhibition on Ecological Vehicles and Renewable

Energies (EVER2010), March 2010, Monaco, CD-ROM file EVER10-paper-245.pdf, Best Paper Award

56 J. M. Liu, J. X. Shen, M. J. Jin, W. Z. Fei, and H. Hao, A New Field Oriented Control Technique of EPS Motor with Low-Cost Current

Sampling, Proceedings of 2010 5th International Conference and Exhibition on Ecological Vehicles and Renewable Energies

(EVER2010), March 2010, Monaco, CD-ROM file EVER10-paper-244.pdf

55 W. Z. Fei, P. C. K. Luk*, J. Ma, J. X. Shen, and G. Yang, A High-Performance Line-Start Permanent Magnet Synchronous Motor

Amended From a Small Industrial Three-Phase Induction Motor (extended from InterMag2009 paper), IEEE Trans. Magnetics, ISSN:

0018-9464, Vol. 45, No. 10, October 2009, pp. 4724-4727. DOI: 10.1109/TMAG.2009.2022179

54 L. L. Wang*, J. X. Shen, P. C. K. Luk, W. Z. Fei, C. F. Wang, and H. Hao, Development of a Magnetic-Geared Permanent-Magnet

Brushless Motor (extended from InterMag2009 paper), IEEE Trans. Magnetics, ISSN: 0018-9464, Vol. 45, No. 10, October 2009, pp.

4578-4581. DOI: 10.1109/TMAG.2009.2023071

53 M. J. Jin*, C. F. Wang, J. X. Shen, and B. Xia, A Modular Permanent-Magnet Flux-Switching Linear Machine With Fault-Tolerant

Capability (extended from AMC2008 paper), IEEE Trans. Magnetics, ISSN: 0018-9464, Vol. 45, No. 8, August 2009, pp. 3179-3186.

DOI: 10.1109/TMAG.2009.2020090

52 C. F. Wang, J. X. Shen, Y. Wang, L. L. Wang, and M. J. Jin*, A New Method for Reduction of Detent Force in Permanent Magnet

Flux-Switching Linear Motors(extended from AMC2008 paper), IEEE Trans. Magnetics, ISSN: 0018-9464, Vol. 45, No. 6, June 2009,

pp. 2843-2846, DOI: 10.1109/TMAG.2009.2018689


51 L. L. Wang, J. X. Shen, C. F. Wang, and H. Hao, Development of a magnetic-geared permanent-magnet brushless motor, Proceedings

of 2009 International Magnetics Conference (InterMag2009), May 2009, Sacramento, USA, CD ROM file FH-02.pdf, Abstract Book

p. 73

50 W. Z. Fei, G. Yang, J. X. Shen, and P. C. K. Luk, High Performance Line-Start Permanent Magnet Synchronous Motor Amended from

Small Industrial Three-Phase Induction Motor, Proceedings of 2009 International Magnetics Conference (InterMag2009), May 2009,

Sacramento, USA, CD ROM file FW-06.pdf, Abstract Book p. 157

49 J. X. Shen, Y. Wang, C. F. Wang, W. Z. Fei, and P. C. K. Luk, Design and Analysis of A New Outer-Rotor Permanent-Magnet

Flux-Switching Machine for Electric Vehicle Propulsion, Proceedings of 2009 4th International Conference and Exhibition on

Ecological Vehicles and Renewable Energies (EVER2009), March 2009, Monaco, CD-ROM file EVER09-paper-136.pdf

48 C. F. Wang, and J. X. Shen, A New Method to Reduce Detent Force in Permanent Magnet Flux-Switching Linear Motors, 2008 Asian

Magnetics Conference (AMC2008), December 2008, Busan, Korea, Abstract Book p. 212, CD ROM file DD9.pdf

47 C. F. Wang, and J. X. Shen, A Modular Permanent Magnet Flux-Switching Linear Motor with Fault-Tolerant Capability, 2008 Asian

Magnetics Conference (AMC2008), December 2008, Busan, Korea, Abstract Book p. 211, CD ROM file DD8.pdf

46 L. L. Wang, J. X. Shen, G. Yang, and Y. Wang, Design of a High-Performance Linear Permanent Magnet Gear, 2008 Asian Magnetics

Conference (AMC2008), December 2008, Busan, Korea, Abstract Book p. 210, CD ROM file DD6.pdf

45 C. F. Wang, and J. X. Shen, A 3D-Field Permanent Magnet Flux-Switching Machine, 2008 Asian Magnetics Conference (AMC2008),

December 2008, Busan, Korea, Abstract Book p. 209, CD ROM file DD4.pdf

44 Y. Wang, W. Z. Fei, J. X. Shen, and Z. X. Fang, An Outer-Rotor Permanent Magnet Flux-Switching Machine for Traction Application,

53rd Annual Conference on Magnetism and Magnetic Materials (MMM2008), ISSN:1087-3848, November 2008, Austin, USA,

Abstract Book pp. 523-524

43 K. Wang, M. J. Jin, J. X. Shen, and R. H. Qiu, Comparative Study on Stator Structures in High-Speed Sensorless Brushless DC

Motors, 53rd Annual Conference on Magnetism and Magnetic Materials (MMM2008), ISSN:1087-3848, November 2008, Austin,

USA, Abstract Book p. 523

42 G. Yang*, J. Ma, J. X. Shen, and Y. Wang, Optimal Design and Experimental Verification of a Line-Start Permanent Magnet

Synchronous Motor, 2008 International Conference on Electrical Machines and Systems (ICEMS2008), ISBN:978-7-5062-9221-4,

October 2008, Wuhan, China, pp. 3232-3236, CD ROM file SMP-48.pdf, Abstract Book p. 806

41 Y. Wang*, Z. W. Huang, J. X. Shen, and C. F. Wang, Comparative Study of 6/5- and 12/10-Pole Permanent Magnet Flux-Switching

Motors Considering Flux-Weakening Capability, 2008 International Conference on Electrical Machines and Systems (ICEMS2008),

ISBN:978-7-5062-9221-4, October 2008, Wuhan, China, CD ROM file SMP-55.pdf

40 C. F. Wang, J. X. Shen, L. L. Wang, and K. Wang, A Novel Permanent-Magnet Flux-Switching Linear Motor, Proceedings of 2008

IET International Conference on Power Electronics, Machines and Drives (PEMD2008), ISBN:9780863419003, April 2008, York,

UK, pp. 116-119

39 Z. X. Fang, Y. Wang, J. X. Shen, and Z. W. Huang, Design and Analysis of a Novel Flux-Switching Permanent-Magnet

Integrated-Starter-Generator, Proceedings of 2008 IET International Conference on Power Electronics, Machines and Drives

(PEMD2008), ISBN:9780863419003, April 2008, York, UK, pp. 106-110

38 L. L. Wang, J. X. Shen, Y. Wang, and K. Wang, A Novel Magnetic-Geared Outer-Rotor Permanent-Magnet Brushless Motor,

Proceedings of 2008 IET International Conference on Power Electronics, Machines and Drives (PEMD2008), ISBN:9780863419003,

April 2008, York, UK, pp. 33-36

37 K. Wang, J. X. Shen*, and F. Z. Zhou, Design Aspects of a High-Speed Sensorless Brushless DC Motor Using Third Harmonic

Back-EMF for Sensorless Control, Journal of Applied Physics, ISSN: 0021-8979, Vol. 103, No. 7, April 2008, p. 07F110, DOI:

10.1063/1.2832618

36 K. Wang, J. X. Shen, and F. Z. Zhou, Design Aspects of a High-Speed Sensorless Brushless DC Motor Using Third Harmonic

Back-EMF, 52nd Annual Conference on Magnetism and Magnetic Materials (MMM2007), November 2007, Tampa, USA, Abstract

Book p. 422

35 K. Wang*, J. X. Shen, and S. Z. Dong, Sensorless Control and Initial Position Estimation of Permanent Magnet Flux-Switching Motor,

Proceedings of 2007 International Conference on Electrical Machines and Systems (ICEMS2007), ISBN: 978-89-86510-08-9, October

2007, Seoul, Korea, CD ROM file MD3-03.pdf, pp. 487-491

34 K. Wang*, J. X. Shen, F. Z. Zhou, R. H. Qiu, and R. G. Lin, Optimal Design of Magnet Pole Arc Considering Utility of Third-Harmonic

Back-EMF in High-Speed Sensorless Brushless DC Motors, Proceedings of 2007 International Conference on Electrical Machines and

Systems (ICEMS2007), ISBN: 978-89-86510-08-9, October 2007, Seoul, Korea, CD ROM file PM1-05.pdf, pp. 680-684

33 F. Z. Zhou*, J. X. Shen, W. Z. Fei, and R. G. Lin, Study of Retaining Sleeve and Conductive Shield and Their Influence on Rotor Loss in

High-Speed PM BLDC Motors, IEEE Trans. Magnetics, ISSN: 0018-9464, Vol. 42, No. 10, October 2006, pp. 3398-3400, DOI:

10.1109/TMAG.2006.879434

32 F. Z. Zhou, J. X. Shen, W. Z. Fei, and R. G. Lin, Study of Retaining Sleeve and Conductive Shield and Their Influence on Rotor Loss

in High-Speed PM BLDC Motors, 2006 International Magnetics Conference (InterMag2006), May 2006, San Diego, USA, CD ROM

file ET-03.pdf, Abstract Book p. 497

31 W. Z. Fei*, and J. X. Shen, Comparative Study and Optimal Design of PM Switching Flux Motors, Proceedings of 2006 International

Universities Power Engineering Conference (UPEC2006), ISBN: 978-1-86135-342-9, ISBN: 978-1-86135-342-9, September 2006,

Newcastle upon Tyne, UK, CD ROM file [email protected]_288_FWZ_UPEC_6564.pdf, Abstract Book pp. 243-244, DOI:

10.1109/UPEC.2006.367568

30 W. Z. Fei*, and J. X. Shen, Novel Permanent Magnet Switching Flux Motors, Proceedings of 2006 International Universities Power

Engineering Conference (UPEC2006), ISBN: 978-1-86135-342-9, September 2006, Newcastle upon Tyne, UK, CD ROM file

E-25-FWZ_UPEC_1210610.pdf, Abstract Book pp. 259-260, DOI: 10.1109/UPEC.2006.367575

29 F. Z. Zhou*, J. X. Shen, and W. Z. Fei, Influence on Rotor Eddy-Current Loss in High-Speed PM BLDC Motors, Proceedings of 2006

International Universities Power Engineering Conference (UPEC2006), ISBN: 978-1-86135-342-9, September 2006, Newcastle upon

Tyne, UK, CD ROM file E-27-ZFZ_UPEC2006.pdf, Abstract Book pp. 261-262, DOI: 10.1109/UPEC.2006.367576


28 J. X. Shen*, Z. Q. Zhu, and D. Howe, Practical Issues in Sensorless Control of PM Brushless Machines Using Third-Harmonic

Back-EMF, Proceedings of 2006 International Power Electronics and Motion Control Conference (IPEMC’2006), ISBN:

1-4244-0448-7, August 2006, Shanghai, China, pp. 928-932

27 Z. Q. Zhu*, J. X. Shen, and D. Howe, Flux-Weakening Characteristics of Trapezoidal Back-EMF Machines in Brushless DC and AC

Modes, Proceedings of 2006 International Power Electronics and Motion Control Conference (IPEMC’2006), ISBN: 1-4244-0448-7,

August 2006, Shanghai, China, pp. 908-912

26 J. X. Shen*, and S. Iwasaki, Sensorless Control of Ultrahigh-Speed PM Brushless Motor Using PLL and Third Harmonic Back EMF,

IEEE Trans. Industrial Electronics, ISSN: 0278-0046, Vol. 53, No. 2, April 2006, pp. 421-428, DOI: 10.1109/TIE.2006.870664

25 Y. Zhou, J. X. Shen, Y. Y. Ye, and T. X. Cai, Control of a LIM-Driven Elevator Door, Proceedings of 2005 International

Symposium on Linear Drives for Industry Applications (LDIA’2005), September 2005, Kobe Awaji, Japan, pp. 481 -483

24 J. X. Shen*, Z. Q. Zhu, and D. Howe, Sensorless Flux-Weakening Control of Permanent Magnet Brushless Machines Using

Third-Harmonic Back-EMF, IEEE Trans. Industry Applications, ISSN: 0093-9994, Vol. 40, No. 6, November 2004, pp.

1629-1636, DOI: 10.1109/TIA.2004.836157

23 J. X. Shen*, Z. Q. Zhu, D. Howe, and J. M. Buckley, Fuzzy Logic Speed Control and Current Harmonic Reduction in Permanent

Magnet Brushless AC Drives, IEE Proceedings – Electric Power Applications, ISSN: 1350-2352, Vol. 152, No. 3, May 2005, pp.

437-446, DOI: 10.1049/ip-epa.20040989

22 J. X. Shen*, Z. Q. Zhu, and D. Howe, PM Brushless Drives with Low-Cost and Low-Resolution Position Sensors, Proceedings of

2004 International Power Electronics and Motion Control Conference (IPEMC ’2004), ISBN: 7-5605-1869-9, August 2004,

Xi’an, China, pp. 1033-1038

21 J. X. Shen*, and S. Iwasaki, Improvement of ASIC-Based Sensorless Control for Ultrahigh-Speed Brushless DC Motor Drive,

Record of 2003 IEEE International Electric Machines and Drives Conference (IEMDC ’2003), ISBN: 0-7803-7817-2, June 2003,

Madison Wisconsin, USA, pp. 1049-1054

20 J. X. Shen*, Z. Q. Zhu, and D. Howe, Sensorless Flux-Weakening Control of Permanent Magnet Brushless Machines Using

Third-Harmonic Back-EMF, Record of 2003 IEEE International Electric Machines and Drives Conference (IEMDC ’2003),

ISBN: 0-7803-7817-2, June 2003, Madison Wisconsin, USA, pp. 1229-1235

19 J. X. Shen*, and K. J. Tseng, Analyses and Compensation of Rotor Position Detection Error in Sensorless PM Brushless DC

Motor Drives, IEEE Trans. Energy Conversion, ISSN: 0885-8969, Vol. 18, No. 1, March 2003, pp. 87-93, DOI:

10.1109/TEC.2002.808339

18 J. Liu, S. A. Billings*, Z. Q. Zhu, and J. X. Shen, Enhanced Frequency Analysis Using Wavelets, International Journal of

Control, ISSN: 0020-7179, Vol. 75, No. 15, October 2002, pp. 1145-1158, DOI: 10.1080/00207170210156206

17 J. X. Shen*, Z. Q. Zhu, and D. Howe, Improved Speed Estimation in Sensorless PM Brushless AC Drives, IEEE Trans.

Industry Applications, ISSN: 0093-9994, Vol. 38, No. 4, July 2002, pp.1072-1080, DOI: 10.1109/TIA.2002.800778, Prize

Paper Award Third Prize

16 Z. Q. Zhu*, J. X. Shen, and D. Howe, Comparative Study of Alternative Fuzzy Logic Control Strategies of Permanent Magnet

Brushless AC Drive, Proceedings of the 2002 IEEE International Conference on Control Applications (CCA/CACSD ’2002),

ISBN: 0-7803-7386-3, September 2002, Glasgow, UK, pp.42-47, invited paper

15 J. X. Shen*, Z. Q. Zhu, D. Howe, and J. M. Buckley, Adaptive Fuzzy Logic Control of PM Brushless AC Drives, Proceedings

of 2002 IEE International Conference on Power Electronics, Machines and Drives (PEMD’2002), ISBN: 0-85296-747-0, ISSN:

0537-9989, April 2002, Bath, UK, pp. 68-73

14 J. X. Shen, Z. Q. Zhu, and D. Howe, Practical Issues in Implementing Fuzzy Logic Speed Control of PM Brushless AC Drives,

Proceedings of 2001 Chinese Automation and Computer Science Conference in the UK (CACSCUK’2001), September 2001,

Nottingham, UK, pp.185-190

13 J. X. Shen, Z. Q. Zhu, and D. Howe, Hybrid PI and Fuzzy Logic Speed Control of PM Brushless AC Drives, Proceedings of 2001

European Conference on Power Electronics and Applications (EPE’2001), August 2001, Graz, Austria, CD ROM file PP00317.pdf

12 J. X. Shen*, Z. Q. Zhu, and D. Howe, Improved Speed Estimation in Sensorless PM Brushless AC Drives, Record of 2001 IEEE

International Electric Machines and Drives Conference (IEMDC’2001), ISSN: 0093-9994, June 2001, Cambridge, USA, pp.960-966,

DOI: 10.1109/TIA.2002.800778

11 J. X. Shen, Z. Q. Zhu, and D. Howe, A Hybrid PI-Fuzzy Logic Control of Permanent Magnet Brushless AC Drive, Proceedings of

2000 Chinese Automation and Computer Science Conference in the UK (CACSCUK’2000), September 2000, Loughborough, UK,

pp.71-77

10 J. X. Shen*, K. J. Tseng, D. M. Vilathgamuwa, and W. K. Chan, A Novel Compact PMSM with Magnetic Bearing for Artificial Heart

Application, IEEE Trans. Industry Applications, ISSN: 0093-9994, Vol. 36, No. 4, July 2000, pp.1061-1068, DOI: 10.1109/28.855961

9 J. X. Shen, D.M. Vilathgamuwa, K. J. Tseng, and W. K. Chan, A Novel Compact PMSM with Magnetic Bearing for Artificial Heart

Application, Proceedings of 1999 IEEE Industry Applications Society Annual Meeting (IEEE-IAS’1999), October 1999, Phoenix,

USA, pp.1201-1207

8 J. X. Shen, and K. J. Tseng, Design Considerations for Radial-Flux Permanent Magnet Brushless DC Motor with Short Axial Length,

Proceedings of 1999 Chinese International Conference on Electric Machines (CICEM’1999), August 1999, Xi’an, China, pp.207-210

7 J. X. Shen, K. J. Tseng, and W. K. Chan, A New Compact PM Motor with Magnetically Levitated Rotor for Application as

Implantable Artificial Heart, Proceedings of 1999 International Power Engineering Conference (IPEC’1999), May 1999, Singapore,

pp.612-617

6 J. Hu*, B. R. Duggal, D. M. Vilathgamuwa, and J. X. Shen, A DSP Based Field Oriented Induction Motor Control System with Fuzzy

Logic Scheme, Record of 1999 IEEE International Electric Machines and Drives Conference (IEMDC’1999), ISBN: 0-7803-5293-9,

May 1999, Seattle, USA, pp.637-639, DOI: 10.1109/IEMDC.1999.769199

5 J. X. Shen*, and K. J. Tseng, Analyses and Compensation of Rotor Position Detection Error in a Sensorless PM Brushless DC Motor,

Record of 1999 IEEE International Electric Machines and Drives Conference (IEMDC’1999), ISBN: 0-7803-5293-9, May 1999,


Seattle, USA, pp.81-83, DOI: 10.1109/IEMDC.1999.769034

4 J. X. Shen, K. J. Tseng, and W. K. Chan, Research on a Compact PMSM with Magnetic Bearing for Use in Artificial Heart, Electrical

& Electronic Engineering Research, Nanyang Technological University, Singapore, ISSN 0218-2602, January 1999, p.77-78

3 G. D. He, J. P. Jiang, J. X. Shen, and J. Lei, A Fuzzy Variable Structure Control Scheme for AC Servo Drive System, Record of 1997

IEEE International Electric Machines and Drives Conference (IEMDC’1997), May 1997, Milwaukee, USA, pp.WC3/3.1-WC3/3.3

2 Y. X. Chen, J. X. Shen, and Z. M. Fang, Topology and Preliminary Design of Slotless Brushless DC Motor, Record of 1997 IEEE

International Electric Machines and Drives Conference (IEMDC’1997), May 1997, Milwaukee, USA, pp.WB2/7.1-WB2/7.3

1 J. X. Shen, and Y. B Liu, Microcomputer Based Position-Sensorless Drive for Brushless DC Motor, Proceedings of 1994 International

Power Electronics and Motion Control Conference (IPEMC’1994), June 1994, Beijing, China, pp.402-407

[Papers Published on Chinese Journals and Conferences] (some papers in English)

67 X. Q. Huang, M. J. Jin, and J. X. Shen, Open-Winding PMSG System with Common DC Bus and Its Zero-Sequence Current

Suppression, Micromotors, ISSN:1001-6848, Vol.49, No.3, 3/2016, pp.35-39

66 C. Jiang, H. Hao, and J. X. Shen, Analysis of Base Speed Determination of Permanent Magnet Synchronous Motor with

Flux-Weakening Control, Micromotors, ISSN:1001-6848, Vol.49, No.2, 2/2016, pp.1-5

65 H. Y. Li, and J. X. Shen, FEA-Based Design and Comparative Study of Axial Flux Permanent Magnet Machines with Various

Topologies, Transactions of China Electrotechnical Society, ISSN:1000-6753, Vol.30, No.14, 7/2015, pp.32-40

64 J. X. Shen, H. Yang, T. Y. Zheng, Q. F. Lu, J. Q. Yang, and H. Nian, Review of the 17th International Conference on Electrical

Machines and Systems (ICEMS2014) - Advanced Machine Systems, Superior Drive Control and Cleaner Power Energies for a Better

Future World, Transactions of China Electrotechnical Society, ISSN:1000-6753, Vol.30, No.14, 7/2015, pp.1-5

63 C. Y. Hsiao, H. C. Hsiao, and J. X. Shen, Brief Introduction to Wind Power System and Guideline of Generator Design Program,

Machinery Monthly, ISSN:1814-909X, No.5, 5/2015, pp.68-79

62 J. Li, J. X. Shen, Rotor Slots Radial Skewing on Efficiency Effect of Squirrel Cage Induction Motor Based on FEM, Micromotors,

ISSN:1001-6848, Vol.48, No.4, 4/2015, pp.1-5

61 J. Yuan, J. X. Shen, C. W. Shi, and P. Li, Investigation on Cogging Torque of Permanent Magnet Synchronous Machines with

Segmented Stators, Micromotors, ISSN:1001-6848, Vol.48, No.3, 3/2015, pp.1-4

60 J. Li, J. X. Shen, High-efficiency modification of Y-Series induction motors with low-harmonic winding, Advanced Technology of

Electrical Engineering and Energy, ISSN:1003-3076, Vol.33, No.12, 12/2014, pp.10-14

59 S. Wang, D. M. Miao, and J. X. Shen, Automatic Feeding System of Woodworking Machine Based on PLC and LIM, Journal of

Mechanical and Electrical Engineering, ISSN:1001-4551, Vol. 31, No. 11, 11/2014, pp. 1431-1435

58 Y. Zhang, J. X. Shen, Modeling and Simulation of a Vector-Controlled Variable-Speed System for Dual 3-Phase Induction Motor, Small

& Special Electrical Machines, ISSN:1004-7018, Vol.42, No.7, 7/2014, pp.61-65

57 W. Luo, M. J. Jin, J. X. Shen, Modeling and Analysis of a Field-Modulated Multi-Power-Terminal Machine, Small & Special Electrical

Machines, ISSN:1004-7018, Vol.42, No.5, 28/5/2014, pp. 45-47&52

56 J. X. Shen, Y. Lu, Andreas Gassner, Hysteresis Current Control With Two-phase Chopping for Permanent Magnet Synchronous

Machines, Advanced Technology of Electrical Engineering and Energy, ISSN:1003-3076, Vol.33, No.2, 2/2014, pp.35-38&75,

DOI:1003-3076(2014)02-0035-04

55 S. Z. Liang, J. X. Shen, 2D-FEM estimation of eddy current loss in permanent magnets of PMSM, Advanced Technology of Electrical

Engineering and Energy, ISSN:1003-3076, Vol.33, No.1, 1/2014, pp.52-57&75, DOI:1003-3076(2014)01-0052-06

54 J. X. Shen*, L. L. Wang, Design and Experimental Study of Permanent Magnet Machines with Magnetic Field Modulation, Transactions

of China Electrotechnical Society, ISSN:1000-6753, Vol.28, No.11, 11/2013, pp.28-34

53 M. J. Jin*, W. Z. Fei, and J. X. Shen, Investigation of Axial Magnetic Force in Permanent Magnet Synchronous Machines with Rotor

Step Skewing, Transaction of China Electrotechnical Society, ISSN:1000-6753，Vol.28, No.11, 11/2013, pp.19-27, in English

52 J. X. Shen*, C. F. Wang, W. Z. Fei, Y. Wang, M. J. Jin, Some Optimal Design Methods for Permanent Magnet Flux Switching Linear

Machines, Transactions of China Electrotechnical Society, ISSN:1000-6753, Vol.28, No.11, 11/2013, pp.1-8

51 J. X. Shen*, D. M. Miao, Variable Speed Permanent Magnet Synchronous Generator Systems and Control Strategies, Transactions of

China Electrotechnical Society, ISSN:1000-6753, Vol.28, No.3, 3/2013, pp.1-8, invited paper

50 J. X. Shen*, P. Li, H. Hao, and G. Yang, Study on Electromagnetic Losses in High-Speed Permanent Magnet Brushless Machines-the

State of the Art, Proceedings of the CSEE, ISSN:0258-8013, Vol.33, No.3, 1/2013, pp.62-74, in English

49 J. X. Shen*, H. Hao, C. Yuan, FEA Study on Circumferential Grooves on Rotor Retaining Sleeve of High-Speed PM Brushless Motors,

Proceeding of the CSEE, ISSN:0258-8013, Vol.32, No.36, 12/2012, pp.53-60

48 K. H. Ji, J. X. Shen*, A Low Speed Servo Motor Drive System with Disturbance Torque Observers, Proceeding of the CSEE,

ISSN:0258-8013, Vol.32, No.15, 5/2012, pp.100-106

47 B. Xia, M. J. Jin, J. X. Shen, Design of Axial Flux Permanent Magnet Machines with Segmental 2D Finite-Element Method, Small &

Special Electrical Machines, ISSN:1004-7018, Vol.39, No.4, 2011, pp.1-3&7

46 J. X. Shen, Design Considerations for High-Speed PM Brushless Machines, Proceedings of the 15th Small Motors Technology

Conference and Exhibition of China (SMTCE-China’2010), 11/2010, Shanghai, China, pp.9-18, keynote speech

45 J. M. Liu, J. X. Shen, K. Wang, Design Considerations for High-Speed PM Brushless Machines Variable-High-Speed BLDC Drive

System, Micromotors, ISSN:1001-6848, Vol.43, No.9, 9/2010, pp.93-96

44 Y. Ming, J. M. Liu, J. X. Shen, Achievement of Low-Cost Electric Power Steering Control System and Optimization of Control

Strategy, Electric Machines & Control Application, ISSN:1001-8085, Vol.37, No.6, 6/2010, pp.27-30&34

43 K. Wang, M. J. Jin*, J. X. Shen, Study on Rotor Configurations in Third Harmonic Based High-Speed BLDC Motor, Journal of

Zhejiang University (Engineering Science), ISSN:1008-973X, Vol.44, No.3, 3/2010, pp.557-562


42 C. F. Wang, J. X. Shen, Design of IPM BLAC Motor for Vehicle EPS Application, Proceedings of 2009 Doctoral Forum of China –

Power Science and Technologies, 11/2009, Hangzhou, China, Abstract Book p.110, CD ROM file 80.pdf

41 J. Z. Fu, H. Hao, J. X. Shen, Z. P. Pan, Y. Mei, A Low Cost Hybrid Excitation Brushless DC Motor, Micromotors, ISSN:1001-6848,

Vol.42, No.8, 8/2009, pp.33-34&78

40 Y. Bai, J. X. Shen, Application of Variable Reluctance Rotor Position Sensor, Micromotors, ISSN:1001-6848, Vol.42, No.5, 5/2009,

pp.1-3

39 Z. W. Huang, J. X. Shen*, Y. Wang, Z. X. Fang, Configuration and Performance of Permanent Magnet Flux-Switching Motors with

Consideration of Flux-Weakening Operation, Journal of Zhejiang University (Engineering Science), ISSN:1008-973X, Vol.43, No.3,

3/2009, pp.578-583

38 H. Hao, J. X. Shen, J. Z. Fu, J. Han, Y. Mei, A Low-Cost PM Brushless Doubly-Salient Motor, Small & Special Electrical Machines,

ISSN:1004-7018, Vol.36, No.12, 12/2008, pp.8-10

37 Y. Wang, J. X. Shen, W. Z. Fei, and Z. W. Huang, Design Techniques for Reducing Cogging Torque in PM Flux-Switching Machines,

Proceedings of 2008 Doctoral Forum of China – Electrical Engineering, ISBN:978-7-5643-0109-5, 11/2008, Chengdu, China,

pp.1607-1612, in English

36 Z. W. Huang, J. X. Shen*, Z. X. Fang, Y. Wang, Analysis and Optimal Design of a 3-Phase 6/5-Pole PM Flux-Switching Motor for

Flux-Weakening Application, Proceeding of the CSEE, ISSN:0258-8013, Vol.28, No.30, 10/2008, pp.61-66

35 F. Z. Zhou, J. X. Shen*, K. Wang, R. G. Lin, Influence of Rotor Structure on Rotor Eddy-Current Loss in High-Speed Permanent

Magnet Brushless DC Motors, Journal of Zhejiang University (Engineering Science), ISSN:1008-973X, Vol.42, No.9, 9/2008,

pp.1587-1590

34 C. F. Wang, J. X. Shen, Novel Permanent Magnet Flux Switching Linear Machine, Proceedings of 2008 National Conference on

Linear Machines, Modern Drives and Systems, 9/2008, Hangzhou, China, pp.86-90, Best Paper Award

33 J. X. Shen, Z. X. Fang, Development Trend and Key Technologies of Modern Electric Machines, Small & Special Electrical Machines,

ISSN:1004-7018, Vol.36, No.6, 6/2008, pp.55-57

32 S. Z. Dong, J. Ma, J. X. Shen, Optimal Slot Opening Design for Cogging Torque Reduction of PM Motor, Micromotors,

ISSN:1001-6848, Vol.40, No.12, 12/2007, pp.1-3

31 J. Ma, S. Z. Dong, J. X. Shen, Influence of Magnet Embedding Depth in Line-Start Interior Permanent Magnet Synchronous Motors,

Micromotors, ISSN:1001-6848, Vol.40, No.11, 11/2007, pp.1-3

30 F. Z. Zhou, J. X. Shen, K. Wang, R. G. Lin, Design of Universal PM BLDC Motor Controller with Reversion Function, Micromotors,

ISSN:1001-6848, Vol.40, No.10, 10/2007, pp.43-44

29 F. Z. Zhou, J. X. Shen, K. Wang, R. G. Lin, Research on Topology of High-Speed PM Brushless DC Motors, Small & Special Electrical

Machines, ISSN:1004-7018, Vol.35, No.10, 10/2007, pp.1-3&6

28 F. Z. Zhou, J. X. Shen*, R. G. Lin, Reduction of Rotor Loss in High-Speed Permanent Magnet Motors by Design Method, Journal of

Zhejiang University (Engineering Science), ISSN:1008-973X, Vol.41, No.9, 9/2007, pp.1587-1591

27 W. Z. Fei, J. X. Shen, Study on the Influence of Rotor-Skewing on Performance of PM Flux Switching Machines, Micromotors,

ISSN:1001-6848, Vol.40, No.2, 2/2007, pp.1-4&36

26 W. Z. Fei, J. X. Shen, Y. Zhou, Design of Counting and Interface Circuit of Incremental Encoder, Small & Special Electrical Machines,

ISSN:1004-7018, Vol.35, No.1, 1/2007, pp.17-18

25 W. Z. Fei, J. X. Shen, Novel Permanent Magnet Flux Switching Motors, Small & Special Electrical Machines, ISSN:1004-7018, Vol.34,

No.8, 8/2006, pp.1-3&7

24 J. X. Shen, Y. X. Chen, EMF-Based Sensorless Control Techniques of PM BLDC Motors – A Literature Review, Small & Special

Electrical Machines, ISSN:1004-7018, Vol.34, No.7, 7/2006, pp.36-40

23 J. X. Shen, W. Z. Fei, L. G. Chen, Influence of Airgap Field Distribution and Surface PM Magnetization in Brushless DC Motors, Small

& Special Electrical Machines, ISSN:1004-7018, Vol.34, No.6, 6/2006, pp.7-9

22 Y. Zhou, J. X. Shen, Y. Q. Ye, Psoc Control of a LIM-Driven Elevator Door, Small & Special Electrical Machines, ISSN:1004-7018,

Vol.34, No.5, 5/2006, pp.22-23&26

21 J. X. Shen, Y. Q. Ye, Y. X. Chen, Issues in PM Brushless AC Motor and Servo Control System for EPS Application, Electric Machines

& Control Application, ISSN:1001-8085, Vol.33, No.4, 4/2006, pp.27-29&33

20 J. X. Shen, L. G. Chen, Analytical Calculation of Airgap Field in 2-Pole Permanent Magnet Brushless Motor with

Parallel-Magnetization, Electric Machines & Control Application, ISSN:1001-8085, Vol.33, No.1, 1/2006, pp.7-10

19 J. X. Shen, Y. X. Chen, EMF-Based Sensorless Control Techniques of BLDC Motors – A Literature Review, Proceedings of the 9th

Small Motors Technology Conference and Exhibition of China (SMTCE-China’2004), 11/2004, Shanghai, China, pp.30-35

18 J. X. Shen, Y. X. Chen, EPAS and its Motor Drive System, Proceedings of 2004 Symposium on Micro Motors Technology Innovation

and Applications, 9/2004, Qingdao, China, pp.157-163

17 J. X. Shen, J. Luo, Y. X. Chen, Optimal Design of PM BLDC Motor with Teeth Poles Ratio of 3:2, Small and Medium Electric

Machines, ISSN:1671-5799, Vol.27, No.2, 2/2000, pp.11-15&26

16 J. X. Shen, J. Luo, Research on an Artificial Heart with Permanent Magnet Synchronous Motor and Magnetic Bearing, Micromotors,

ISSN:1001-6848, Vol.33, No.1, 1/2000, pp.3-6

15 J. X. Shen*, Y. X. Chen, Sensorless Drive and Flux-Weakening Control for Square-Wave Brushless DC Motor, Journal of Zhejiang

University, ISSN:1008-973X, Vol.33, No.6, 1999, pp.633-639

14 J. X. Shen, J. Luo, Analysis & Compensation of Position Error in SL BLDC Motor, Small & Special Electrical Machines,

ISSN:1004-7018, Vol.27, No.5, 1999, pp.3-7

13 J. H. Du, J. X. Shen, Y. X. Chen, Cogging Torque Analysis of Permanent Magnet Motors, Small & Special Electrical Machines,

ISSN:1004-7018, Vol.27, No.2, 1999, pp.3-7


12 J. X. Shen, H. P. Liao, Y. X. Chen, Analysis of BLDC Motor Structure for Electrical Bicycle Application, Advanced Technology of

Electrical Engineering and Energy, ISSN:1003-3076, Vol.18, No.1, 1/1999，pp.4-7

11 J. X. Shen, X. C. Lv, J. H. Du, Y. X. Chen, Detail Analyses of 3-Step Start for SL BLDC Motor, Small & Special Electrical Machines,

ISSN:1004-7018, Vol.26, No.5, 1998, pp.8-11

10 J. X. Shen, Y. X. Chen, Analysis & Optimization for Stator Split-Ratio of PM-BLDC Motor, Electric Machines and Control,

ISSN:1007-449X, Vol.2, No.2, 1998, pp.80-83

9 X. C. Lv, Y. X. Chen, J. X. Shen, J. H. Du, Analyses for Stator Vibration of Induction Motor with Square Frame, Advanced Technology

of Electrical Engineering and Energy, ISSN:1003-3076, Vol.17, No.2, 1998, pp.18-22

8 J. X. Shen*, Y. X. Chen, Analysis of Shaft Position Detecting Error in a BLDC Motor with ‘Back-EMF Method’, Transactions of China

Electrotechnical Society, ISSN:1000-6753, Vol.13, No.1, 1/1998, pp.10-14&31

7 J. H. Du, J. X. Shen, X. C. Lv, H. M, Jin, Simulation Model of Non-circulating Cycloconverter, Power Electronics Synopsis,

ISSN:1000-100X, Vol.32, No.1, 1/1998, pp.11-13

6 X. C. Lv, J. X. Shen, J. H. Du, Y. X. Chen, Sensorless Control and Weakening Magnet Field Control of Square Wave Brushless DC

Motor, Micromotors, ISSN:1001-6848, Vol.30, No.4, 1997, pp.19-23&39

5 J. X. Shen, Y. X. Chen, Topology and Preliminary Design of Slotless Brushless DC Motor, Advanced Technology of Electrical

Engineering and Energy, ISSN:1003-3076, Vol.16, No.1, 1/1997, pp.45-49

4 J. X. Shen, Y. X. Chen, A Novel Approach to Calculating the Main Size of Sinusoidal Brushless DC Motor, Small & Special Electrical

Machines, ISSN:1004-7018, Vol.24, No.4, 1996, pp.15-17

3 J. Zeng, W. Liu, J. X. Shen, Microcomputer Controlled Position-Sensorless BDCM Drive System, Journal of Xi’an Jiaotong University,

ISSN:0253-987X, Vol.30, No.3, 1996, pp.34-38

2 J. X. Shen, PLC Controlled Small & Medium Synchronous Motor, Journal of Anhui Institute of Mechanical and Electrical Engineering,

ISSN:1671-5799, Vol.1, No.2, 1996, pp.72-75

1 J. X. Shen, X. N. Yang, DWX-1 Multi-Channel Digital Thermometer for Electrical Machine Test, 1993 Annual Meeting on Electric

Measurement, 10/1993, Hangzhou, China, pp.375-386

Appendix C. Patents

Appendix-C. Patents

37* D. Shen, H. Hao, J. X. Shen, and G. Y. Zhou, A Sintered Rare Earth Permanent Magnet with Reduced Eddy Current Loss, Patent No.

ZL201420630227.X

36* J. X. Shen, Y. X. Wang, and W. Sun, An Electrical Machine System with Capability of Common Mode Interference Reduction, Patent

No. ZL201420392121.0

35* J. X. Shen, and D. M. Miao, An Elevator System with Energy Buffer but No Balancing Weight, Patent No. ZL201320833036.9

34* J. X. Shen, C. F. Wang, D. M. Miao, and M. J. Jin, A Railway Transportation Tracking System with Permanent Magnet Flux Switching

Linear Machine, Patent No. ZL201320571162.1

33 J. X. Shen, W. Luo, H. Hao, M. J. Jin, and L. L. Wang, Dual Rotor Permanent Magnet Motor and Application for Washing Machine,

Patent No. ZL201310278665.4, Patent No. ZL201320395319.X

32* L. J. Shen, D. M. Miao, and J. X. Shen, An Automatic Material Feeder for Wood Cutting Machine, Patent No. ZL201320306646.3

31 J. X. Shen, L. J. He, and D. M. Miao, A Permanent Magnet Synchronous Motor Control Method and System Based on Automatic

Zero-Position Identification of Encoder, Patent No. ZL201310186366.8, Patent No. ZL201320274723.1

30 J. X. Shen, P. Li, W. Sun, and K. Wang, A Detection Method of Rotor Position of Permanent Magnet Motor, Patent No.

ZL201210506471.0

29 J. X. Shen, D. M. Miao, and Y. Wang, A Variable Speed Permanent Magnet Synchronous Generator System and its Dual-Terminal

Voltage Stabilization, Patent No. ZL201210205337.7, Patent No. ZL201220287505.7

28 J. X. Shen, and K. H. Ji, A Measurement and Processing Circuit of Orthogonal Sine and Co-Sine Angular Encoder Signals, Patent No.

ZL201210122979.0, Patent No. ZL201220178537.3

27* J. X. Shen, P. Li, and H. Hao, A Rotor of Line Start Permanent Magnet Synchronous Motor with Conductive Retaining Sleeve, Patent

No. ZL201120570962.2

26* J. X. Shen, D. M. Miao, C. F. Wang, M. J. Jin, D. Shi, and Y. C. Wang, A Permanent Magnet Brushless DC Motor with Dual-Direction

Phase-Advancing Control, Patent No. ZL201120341254.1

25* M. J. Jin, L. L. Wang, and J. X. Shen, A Field-Modulated Permanent Magnet Electrical Machine with Multi Power Terminals, Patent No.

ZL201120298862.9

24 J. X. Shen, and C. F. Wang, A Comprehensive Rotor of Permanent Magnet Electrical Machine and its Manufacture Method, Patent No.

ZL201110108744.1, Patent No. ZL201120130906.7

23* J. X. Shen, and C. F. Wang, Stator Structure of a Comprehensive Permanent Magnet Flux Switching Machine, Patent No.

ZL201120130890.X

22 J. X. Shen, and C. F. Wang, Permanent Magnet Machine Rotor with Nonmagnetic Barry Sleeve and its Manufacture Method, Patent No.

ZL201110108764.9, Patent No. ZL201120130911.8

21* J. X. Shen, H. Hao, and M. J. Jin, A permanent Magnet Machine Rotor, Patent No. ZL201120066808.1

20* J. X. Shen, and P. Li, A Squirrel Cage Rotor of Line Start Permanent Magnet Synchronous Motor, Patent No. ZL201120057183.2

19* J. X. Shen, and P. Li, A Line Start Permanent Magnet Synchronous Machine Rotor with V-Shaped Slots, Patent No. ZL201120057185.1

18* J. X. Shen, Y. C. Wang, and D. Shi, An Electromagnetic Harvesting System for Fluctuation and Vibration Energy, Patent No.

ZL201120049855.5

17* J. X. Shen, D. M. Miao, C. F. Wang, C. Xu, J. J. Zhang, and H. Yu, An Energy Harvesting Shoe Based on Linear Generator, Patent No.

ZL201020541824.7

16 J. X. Shen, D. Shi, and C. F. Wang, A Linear Generating Apparatus with Permanent Magnet Damping, Patent No. ZL201010291651.2,

Patent No. ZL201020541806.9

15* J. X. Shen, and C. F. Wang, A Modular Combinable Stator Structure of Electrical Machines, Patent No. ZL201020295553.1

14 J. X. Shen, and C. F. Wang, A Modular Stator Structure of Electrical Machines and its Applications, Patent No. ZL201010256112.5,

Patent No. ZL201020295567.3

13* J. X. Shen, and C. F. Wang, A Modular Combinable Stator Configuration of Electrical Machines, Patent No. ZL201020295561.6

12* J. X. Shen, Y. Wang, W. Z. Fei, and C. F. Wang, An Iron Core Rotor for Doubly Salient Electrical Machine, Patent No.

ZL200920121249.2

11 J. X. Shen, and C. F. Wang, A Field Enhanced Permanent Magnet Flux Switching Machine with High Fault Tolerance, Patent No.

ZL200910098785.X, Patent No. ZL200920120373.7

10 J. X. Shen, and C. F. Wang, A Hybrid Field Flux Switching Machine, Patent No. ZL200910098789.8, Patent No. ZL200920120377.5

9* J. X. Shen, and C. F. Wang, A Field Enhanced Permanent Magnet Flux Switching Machine, Patent No. ZL200920120374.1

8 J. X. Shen, and C. F. Wang, A Hybrid Field Doubly Salient Electrical Machine, Patent No. ZL200910098788.3, Patent No.

ZL200920120376.0

7 J. X. Shen, and C. F. Wang, A Hybrid Field Flux Switching Electrical Machine, Patent No. ZL200910098787.9, Patent No.

ZL200920120375.6

6 J. X. Shen, and C. F. Wang, A Modular Fault Tolerant Permanent Magnet Flux Switching Linear Electrical Machine, Patent No.

ZL200810120974.8, Patent No. ZL200820164189.8

5 J. X. Shen, and C. F. Wang, A Hybrid Field Permanent Magnet Flux Switching Machine, Patent No. ZL200810120973.3, Patent No.

ZL200820164188.3

4 J. X. Shen, L. L. Wang, A Low Speed High Torque Permanent Magnet Brushless DC Machine with Field-Based Speed Reduction, Patent

Appendix C. Patents

No. ZL200810063000.0, Patent No. ZL200820121436.6

3 W. F. Tang, J. X. Shen, and G. J. Dai, Permanent Magnet Brushless DC Machine, Patent No. ZL99 1 13414.1

2* W. F. Tang, J. X. Shen, and G. J. Dai, Permanent Magnet DC Machine, Patent No. ZL98 2 25156.4

1* W. F. Tang, J. X. Shen, G. J. Dai, and Z. Y. Yuan, Permanent Magnet DC Motor for Electric Vehicle Application, Patent No. ZL98 2

44058.8

Appendix D. Conference / Forum Activities

Appendix-D. Activities at International and National Conferences / Forums

[Conference Chairman, Committee Chairs and Members, and General Secretaries of

International Conferences and National Forums]

1 IEEE International Conference on Sustainable Energy Technologies (ICSET’2008),

24-27 November 2008, Singapore

Technical Programme

Committee

2 5th International Conference and Exhibition on Ecological Vehicles and Renewable

Energies (EVER’2010), 25-28 March, 2010, Monte-Carlo, Monaco

Program Committee

3 IEEE International Conference on Sustainable Energy Technologies (ICSET’2010),

6-9 December 2010, Kandy, Sri Lanka

Technical Programme

Committee


Energies (EVER’2011), 31 March-3 April, 2011, Monte-Carlo, Monaco

Program Committee

5 International Electric Machines and Drives Conference (IEMDC’2011), 15-18 May

2011, Niagara Falls, Canada

Technical Committee

6 14th International Conference on Electrical Machines and Systems (ICEMS’2011),

20-23 August 2011, Beijing, China

Technical Programme

Committee



Program Committee

8 21st IEEE International Symposium on Industrial Electronics (ISIE’2012), 28-31

May 2012, Hangzhou, China

Track Chair

9 1st International Conference on Renewable Energy Research and Applications

(ICRERA’2012), 11-14 November, 2012, Nagasaki, Japan

International

Advisory Board,

Program Chair



Program Committee

11 4th International Conference on Power Engineering, Energy and Electrical Drives

(IEEE POWERENG’2013), 13-17 May, 2013, Istanbul, Turkey

Program Chair

12 9th International Symposium on Linear Drives for Industry Applications

(LDIA’2013), 7-10 July, 2013, Hangzhou, China

International

Steering Committee,

Technical Program

Committee Chair

13 2nd International Conference on Renewable Energy Research and Applications

(ICRERA’2013), 20-23 October, 2013, Madrid, Spain

International

Advisory Board


26-29 October, 2013, Busan, Korea

Advisory Committee



Program Committee

16 IEEE International Magnetics Conference (Intermag’2014), 4-8 May, 2014, Dresden,

Germany

Program Committee

17 International Power Electronics Conference (IPEC’2014-ECCE-Asia), 18-21 May,

2014, Hiroshima, Japan

Technical Programme

Committee

18 16th International Power Electronics and Motion Control Conference and Exposition

(PEMC), 21-24 September, 2014, Antalya, Turkey

International Publicity

Committee

19 3rd International Conference on Renewable Energy Research and Applications

(ICRERA’2014), 19-22 October, 2014, Milwaukee, USA

International

Advisory Board



22-25 October, 2014, Hangzhou, China

General Chair

21 3rd International Conference on Information Processing and Electrical Engineering

(ICIPEE’2014), 24-25 November, 2014, Tebessa, Algeria

International

Advisory Committee


Energies (EVER’2015), 29 March – 2 April, 2015, Monte-Carlo, Monaco

Program Committee

23 10th International Symposium on Linear Drives for Industry Applications

(LDIA’2015), 27-29 July, 2015, Aachen, Germany

International

Steering Committee


25-28 October, 2015, Pattaya, Thailand

Technical Program

Committee

25 2015 IEEE International Future Energy Electronics Conference (IFEEC’2015), 1-4

November, 2015, Taipei, Taiwan

International

Steering Committee,

Track Chair

26 International Conference on Automatic control, Telecommunications and Signals

(ICATS’2015), 16-18 November, 2015, Annaba, Algeria

Scientific Committee

27 4th International Conference on Renewable Energy Research and Applications

(ICRERA’2015), 22-25 November, 2015, Palermo, Italy

International

Advisory Board

28 1st International Conference on Sustainable Mobility Applications, Renewables and

Technology (SMART2015), 23-25 November, 2015, Kuwait

International

Steering Committee


Energies (EVER’2016), 6-8 April, 2016, Monte-Carlo, Monaco

Program Committee

30 13th IEEE Vehicle Power and Propulsion Conference (VPPC’2016), 19-22 October,

2016, Hangzhou, China

General Chair

31 4th IEEE International Conference on Sustainable Energy Technology

(ICSET’2016), 14 - 17 November, 2016, Hanoi, Vietnam

Technical Program

Committee


Energies (EVER’2017), 11-13 April, 2017, Monte-Carlo, Monaco

Program Committee

33 11th IEEE International Electric Machines and Drives Conference (IEMDC'2017),

21-24 May, 2017, Miami, USA

Topic Chair

1 National Doctoral Forum of China – Power Science and Technologies, 7-10

November, 2009, Hangzhou, China

General Secretary

2 National Doctoral Forum of China – Electrical Engineering, 7-10 November, 2013,

Hangzhou, China

General Secretary

[Session Chairs and Special Session Organizers of International Conferences]

1 EVER’2009

Session EV2: Special Lecture Session on Design Trends of PM Machines for the Sake of their Integration

in Propulsion Applications

Session EV7: Lecture Session on Drives and Generators in Propulsion Systems

2 EVER’2010

Plenary Session

Session REV2: Lecture Session on Converters

3 ICSET’2010

Session EE: Energy Efficiency

4 EVER’2011


Session EV4: Lecture Session on Machine Design 2

5 LDIA’2011 (the 8th International Symposium on Linear Drives for Industry Applications

Session of Linear Induction Motors II

6 ICEMS’2011

Session PMM4: PM Machines-Control

7 EVER’2012

Session EV1: Lecture Session on Machine Design

Session EV3: Lecture Special Session on PM Machines Using Fewer or No Rare Earth Magnets (Special

session organizer and winner of Best Special Session)

8 IEEE ISIE’2012

Session EMD4: Electrical Machine Control

Session EMD5: Losses, Efficiency, and Thermal Analysis

9 IEEE POWERENG’2013

Session of Electrical Machines and Drives

Keynote Speech Session

10 LDIA’2013

Session of Keynote Speeches-3&4

11 ICEMS’2013

Session SMD1: Synchronous Machines and Drives

12 IEEE VPPC’2015

Session RT2#4/4: Power Electronics, Motor Drives and Electric Power Systems

13 SMART’2015

PS3: Plenary Session 3

LS5: Lecture Session on Diagnosis of Sustainable Mobility Actuators

Appendix E. Research Bodies and Academic Societies Service

Appendix-E. Service at Government-Supported Research Bodies and

Academic Societies

1 Vice chair, Subcommittee of Electrical Machinery, Education Committee of Electrical Engineering and

Automation, China Construction Machinery Association (CCMA), since May 2014

2 Specialist advisor, Shenzhen-City Key Laboratory of Electromagnetic Control, since November 2013

3 Vice Secretary-General, Zhejiang Provincial Electrical Machinery and Power Engineering Society, since

November 2012

4 Specialist advisor, Zhejiang Provincial Research Centre of High-Efficiency Small Electrical Machines, since

May 2012

5 Specialist advisor, Aviation Key Laboratory of Science and Technology on Aero Electromechanical System

Integration, July 2010 – October 2015

6 Vice Director, National Research Centre of Precision and Special Electric Machines, since February 2010

7 Executive Board member, Institute of Linear Electric Machines, a sub-society of the China Electrotechnical

Society, since October 2009

Appendix F. Foundations and Technical Awards Referee

Appendix-F. Referee for Foundations and Technical Awards

[Referee for International Research Foundation and Technical Award]

1 The Portuguese Foundation for Science and Technology (FCT)

2 Hiwin Doctoral Dissertation Award which is applicable to Chinese all over the world

3 Swiss National Science Foundation (SNSF)

[Referee for Chinese Research Foundations and Technical Awards]

1 National Natural Science Foundation of China (NSFC)

2 National High Technology Research and Development Program of China (The 863 Program)

3 China Scholarship Council (CSC) Foundation

4 National Outstanding Doctoral Dissertation Award

5 Foundation for Returning Overseas Scholars by Ministry of Education, China

6 Prize of Science and Technology by Ministry of Education, China

7 China Electrotechnic Society (CES) Science and Technology Prize

8 Zhejiang Provincial Natural Science Foundation

9 Hangzhou-City 131 Outstanding Specialists Program

10 Academic Degree and Graduate Education Evaluation Platform of Ministry of Education (MOE) of China

11 Zhejiang Province Science and Technology Prize

Appendix G. Papers Reviewer

Appendix-G. Papers Reviewer

[Reviewer of International Journals]

1 IEEE Transactions on Vehicular Technology, IEEE-TVT, ISSN:0018-9545

2 IEEE Transactions on Industry Applications, IEEE-TIA, ISSN:0093-9994

3 IEEE Transactions on Power Electronics, IEEE-TPEL, ISSN:0885-8993

4 IEEE Transactions on Industrial Electronics, IEEE-TIE, ISSN:0278-0046

5 IEEE Transactions on Energy Conversion, IEEE-TEC, ISSN:0885-8969

6 IEEE Transactions on Magnetics, IEEE-TMAG and MAGCON, ISSN:0018-9464

7 IEEE Transactions on Sustainable Energy, IEEE-TSTE, ISSN:1949-3029

8 IEEE PES Letters, PESL, publication in Journals of IEEE Power and Energy Society

9 European Transactions on Electrical Power, ETEP, ISSN:1430-144X

10 Mechatronics, The Science of Intelligent Machines, ISSN:0957-4158

11 International Journal of Automation and Computing, IJAC, ISSN:1476-8186

12 Robotica, ISSN:0263-5747

13 Serbian Journal of Electrical Engineering, ISSN:1451 4869

14 Journal of Power Electronics, JPE, ISSN:1598-2092

15 Journal of Zhejiang University Science C (Computers & Electronics) , ISSN:1869-1951

16 SCIENCE CHINA Technological Sciences (English version), ISSN:1674-7321

17 International Journal of Applied Electromagnetics and Mechanics, IJAEM, ISSN:1383-5416

18 Transactions on Systems, Signals, and Devices, published by Shaker-Verlag, Germany, ISSN:1861-5252

19 The Open Fuels & Energy Science Journal, TOEFJ, ISSN:1876-973X

20 Energies, ISSN:1996-1073

21 IET Electrical Systems in Transportation, IET-EST, ISSN:2042-9738

22 Frontiers of Electrical and Electronic Engineering, FEEE, ISSN:2095-2732

23 Journal of Systems Science & Complexity, JSSC, ISSN:1009-6124

24 COMPEL: The International Journal for Computation and Mathematics in Electrical and Electronic

Engineering, ISSN:0332-1649

25 Journal of Emerging and Selected Topics in Power Electronics, JESTPE, ISSN:2168-6777

26 Journal of International Conference on Electrical Machines and Systems, JICEMS, ISSN:2234-6902

27 Transactions of Tianjin University, TTJU, ISSN:1006-4982

28 Russian Electrical Engineering (Elektrotechnika) , ISSN:1068-3712 (print), 1934-8010 (electronic)

29 Applied Mathematical Modelling, AMM, ISSN:0307-904X

30 Mathematical Problems in Engineering, MPE, ISSN:1024-123X (print), 1563-5147 (online)

31 The Scientific World Journal, SWJ, ISSN:2356-6140 (print), 1537-744X (online)

32 IET Electric Power Applications, IET-EPA, ISSN:1751-8660

[Reviewer of Chinese Journals]

1 Proceedings of the Chinese Society for Electrical Engineering, ISSN:0258-8013

2 Transactions of China Electrotechnical Society, ISSN:1000-6753

3 Electric Machines and Control, ISSN:1007-449X

4 Journal of Xi’an Jiaotong University, ISSN:0253-987X

5 Journal of Shanghai Jiaotong University, ISSN:1006-2467

6 Journal of Southeast University (Natural Science Edition) , ISSN:1001-0505

7 Journal of Harbin Institute of Technology, ISSN:0367-6234

Appendix G. Papers Reviewer

8 Journal of Harbin University of Science and Technology, ISSN:1007-2683

9 Transactions of Tianjin University (Science and Technology) , ISSN:0493-2137

10 Journal of Basic Science and Engineering, ISSN:1005-0930

11 Modern Electronics Technique, ISSN:1004-373X

12 China Mechanical Engineering, ISSN:1004-132X

13 Journal of Hunan University (Natural Sciences) , ISSN:1674-2974

14 Electric Power Automation Equipment, ISSN:1006-6047

15 Journal of Power Supply, ISSN:2095-2805

16 Journal of Lanzhou University of Technology, ISSN:1673-5196

17 Journal of Zhejiang University (Engineering Science) , ISSN:1008-973X

18 SCIENCE IN CHINA Technological Sciences, ISSN:1674-7259

19 Journal of Northeastern University (Natural Science) , ISSN:1005-3026

20 Electromagnetic Analysis and Applications, ISSN:2325-6710

21 Advanced Technology of Electrical Engineering and Energy, ISSN:1003-3076

22 Journal of Jilin University (Information Science Edition), ISSN: 1671-5896

[Reviewer of International Conferences]

1 International Conference on Electrical Machines and Systems (ICEMS): 2014, 2015, 2016

2 IEEE International Symposium on Industrial Electronics (ISIE): 2012

3 International Conference on Energy and Environmental Protection (ICEEP): 2012

4 IEEE Conference on Industrial Electronics and Applications (ICIEA): 2012

5 International Conference on Power Electronics (ICPE-ECCE Asia): 2011

6 International Aegean Conference on Electrical Machines and Power Electronics & Electromotion

(ACEMP-ELECTROMOTION): 2011

7 IEEE IES International Conference on Power Engineering, Energy and Electrical Drives (POWERENG):

2011, 2015

8 International Magnetics Conference (InterMag): 2007, 2014, 2015

9 Annual Conference on Magnetism and Magnetic Materials (MMM): 2007, 2011

10 IEEE International Conference on Sustainable Energy Technologies (ICSET): 2008, 2010, 2012, 2016

11 International Conference on Machine Learning and Applications (ICMLA): 2010

12 IEEE Conference on Industrial Electronics and Applications (ICIEA): 2010

13 Conference and Exhibition on Ecological Vehicles and Renewable Energies (EVER) (also best paper award

referee): 2010, 2013, 2014, 2015, 2016

14 IEEE Vehicle Power and Propulsion Conference (VPPC): 2008

15 IEEE International Conference on Power Electronics and Drive Systems (PEDS): 2007, 2008

16 IEEE International Electric Machines and Drives Conference (IEMDC): 2007

17 IEEE-IAS Annual Meeting (IAS): 2007, 2015

18 International Symposium on Linear Drives and Industry Applications (LDIA): 2013, 2015

19 International Conference on Sustainable Mobility Applications, Renewables and Technology (SMART):

2015

20 IEEE International Future Energy Electronics Conference (IFEEC): 2015

21 IEEE International Conference on Power Electronics and Motion Control (PEMC): 2016

22 Annual Conference of IEEE Industrial Electronics Society (IECON): 2016

Appendix H. Journals Editorial Service

Appendix-H. Journals Editorial Service

[Editorial Board Member of International and Chinese Journals]

1 Editorial Board member of International Journal of Renewable Energy Research, IJRER, ISSN:1309-0127

(online), since 2011

2 Editorial Board member of Journal of International Conference on Electrical Machines and Systems,

JICEMS, (previous Journal of Emerging Energy Systems & Electric Machines, JEESEM), ISSN:2234-6902

(print), 2234-7577 (online), since 2012

* Winner of Certificate of Appreciation for Sacrificial Contributions to JICEMS, October 2013

3 Editorial Advisory Board member of The Open Fuels & Energy Science Journal, TOEFJ, ISSN:1876-973X,

since 2011

4 Editorial Board member of International Journal of Renewable Energy Technology Research, IJRETR,

ISSN:2325-3924 (online), since 2012

5 Associate Editor of Editorial Board of International Journal of Industrial Electronics and Drives, IJIED,

ISSN:1757-3874 (print), 1757-3882 (online), 2012-2015

6 Editorial Board member of Russian Electrical Engineering (Elektrotechnika) Journal, ISSN:1068-3712


7 Editor of IEEE Trans on Magnetics - Conferences, ISSN:0018-9464, since 2014

8 Editorial Board member of Transactions of China Electrotechnical Society, ISSN:1000-6753, since 2012

9 Editorial Board member of Journal of Electromagnetic Analysis and Applications, JEMAA, ISSN:2325-6710


10 Editorial Board member of Chinese Journal of Electrical Engineering, CJEE, ISSN: 2096-1529, since 2016

[Guest Editor of Special Section of International and Chinese Journals]

1 Guest Editor of Special Issue (EVER2014 Issue) of IEEE Trans on Magnetics - Conferences,

ISSN:0018-9464

2 Guest Editor of Special Section of the September 2013 Issue of the JICEMS, ISSN:2234-6902 (print),

2234-7577 (online)

3 Guest Editor of Special Section of the November 2014 Issue of Transactions of China Electrotechnical

Society, ISSN:1000-6753

Appendix I. Industry Consultancy Service

Appendix-I. Industry Consultancy Service

1 Zhejiang Jiaxue Special Minitype Motors Group - Consultancy for R&D on special electrical machines, and

coordinating with foreign mini-motor manufacturers. With a title of Nan-Tai-Hu Outstanding Specialists

Program by Huzhou City, Zhejiang Province.

Major project of consultancy: permanent magnet brushless dc motors and drives for roof-fan applications,

products amount 250 thousand pcs per annum.

2 Zhejiang Jiangchao Electrical Machinery Co., Ltd., one of the largest high-efficiency motor manufacturers in

China - Consultancy for R&D on high-efficiency electrical motors.

Major project of consultancy: high efficiency induction motors, product amount 1.2 million pcs with 3

million kilo-watts per annum.

3 Xinchang Motai Electrical Machines Co. - Consultancy for R&D on permanent magnet ac motors for fan and

pump applications.

Major project of consultancy: high efficiency low cost permanent magnet motors and drives, high

efficiency induction motor, both for fan applications, products amount 15 thousand pcs per annum.

4 Zhejiang Savyenergy Co. Ltd. – Consultancy for R&D on permanent magnet ac machines.

Major project of consultancy: high efficiency permanent magnet synchronous motors and drives for textile

machine applications, products amount 12 thousand pcs per annum.

5 Shanghai Astronautics and Aeronautics Electrical Machines Co. - Consultancy for R&D on special electrical

machines and controllers for aerospace applications.

Major project of consultancy: high power density permanent magnet motors for airplane applications.

6 Zhejiang Zheda Yuheng Technology and Development Co., Ltd., the largest non-standard silicon steel

supplier in China - Consultancy for R&D and applications of non-standard silicon steel for electrical

machines.

7 Zhejiang Shenghua Magnetic Materials Co., Ltd., one of the largest rare-earth magnet manufacturers in

China - Consultancy for applications of NdFeB magnets for electrical machines.

8 Kunshan Hiecise Electrical Technology Co. Ltd. – Consultancy for R&D and production of electrical wheel

systems.

Appendix J. Industry R&D Projects at Zhejiang University

Appendix-J. Examples of Industry R&D Projects at Zhejiang University

1 High speed motors and controllers for various spindles

2 High speed motors and controllers for electric assisted turbochargers for internal combustion engines

3 High speed motors and controllers for air conditioner compressors and air compressors

4 High speed generators and power converters for exhaust energy regeneration for internal combustion engines

5 High speed machines and controllers for fly-wheel energy storage

6 High power density high reliability permanent magnet motors for various aerospace applications

7 High efficiency low cost permanent magnet motors and controllers for industry fan applications

8 Low vibration low cost permanent magnet motors and controllers for domestic air conditioner applications

9 Very high torque permanent magnet motors and controllers for oil field pump applications

10 Large power permanent magnet synchronous servo motors

11 Permanent magnet synchronous servo motor systems for electric power steering applications

12 Very precise servo motor systems for robotic applications

13 Electric vehicle traction motor systems

14 Marine vessel propelling motor systems

15 Dual-rotor permanent magnet motor systems for washing machine utilities

16 Coreless axial-field permanent magnet machines and power converters for vertical axis wind generators

17 400Hz permanent magnet synchronous generator systems

18 IE3 and IE4 high efficiency induction motor designs

19 Linear induction motors and PLC-based control systems for wood processing machines

20 Linear machine-driven sliding doors and controllers

Appendix K. Leadership and Responsibility at Zhejiang University

Appendix-K. Leadership and Responsibility at Zhejiang University

I joined Zhejiang University in May 2004 as a professor in electrical engineering. I was the vice director of the

Institute of Aerospace and Special Electrical Machines from February 2006 to August 2009. I have been the

director of the Institute and the head of the Department of Electrical Engineering since August 2009, and was the

dean assistant of the College of Electrical Engineering from December 2012 to December 2014. In the last

national evaluation, the College was ranked the Top-4 in China and Department was ranked the Top-5. Since

June 2007, I have also been the leader of the Research Group of Aerospace, Special Electrical Machines and

Drives.

As the College dean assistant, I was mainly in charge of international collaboration, such as students

exchange and joint degree programs, employee recruitment from other countries, as well as international

propaganda. Since December 2014, I am still in charge of the international.

As the Department head, I am in charge of most administrations in the Department, such as postgraduate

education, research activities management, new research directions proposing, laboratory development, and

personnel administration (i.e., recruitment of new staff member, professorship promotion, making rules of annual

evaluation). The Department received research funding of 308.6M CNY in the last 5 years, which is the highest

among the 4 departments in the College. The research outcomes (e.g., patents, papers, national and provincial

awards, grants) of the Department are well recognized (ranked Top-5 in China).

As the Institute director, I am in charge of managing the research activities in the Institute. In the recent 5

years, the Institute received research funding of 101.6 million CNY, i.e., 1.35M CNY per capita per annum

which was ranked the 2nd of the 9 institutes in the College.

I am also the leader of the Research Group of Aerospace, Special Electrical Machines and Drives, which is

within the Institute of Aerospace and Special Electrical Machines. Currently the Group has 1 professor (i.e.,

myself), 3 associate professors, and 1 senior engineer, as well as 4 post-doctoral researchers. Also, the Group has

6 PhD students and 16 Master students. The Group is one of the first five ISO-9001-qualified research groups at

the University. In the recent 5 years, the Group has received national grants (7.77M CNY in total) of 4 projects

of Natural Science Foundation of China (NSFC 51077116, 51007079, 51377140, 51577165), 2 projects of

National Basic Research Program of China (2011CB707204, 2013CB035604), and 1 project of National High

Technology Research and Development Program of China (2011AA11A101), as well as much research funding

from industries. The Group has strong technical links with industries. By way of example, the Group developed

high-speed motor systems for aircraft compressors, high-efficiency motors for vessel propellers, high-torque

low-speed direct-drive motors for oil field pumps, high-speed motors and generators for electric-assisted turbo

chargers and gas-turbine generator systems, permanent magnet synchronous generators for small power wind

energy systems, high-torque-density motors for electrical vehicles, and machines and drive systems for many

other applications. The Group is well reputed by the Chinese electrical machines industry.

Appendix L. Lectures and Students Supervision

Appendix-L. Lectures and Students Supervision

[Lectures at Zhejiang University since 2005]

1 Modeling and Analysis of Electric Machines and Drives, undergraduate course (since 2006)

2 Modern Permanent Magnet Electric Machines – Theory and Control, both undergraduate and graduate

courses (since 2009)

3 New Technologies in Electrical Engineering, undergraduate short course (since 2006)

4 Permanent Magnet Machines and Drives, PhD program short course (since 2006)

5 Electrical Engineering for Aerospace Applications, undergraduate short course (since 2007)

6 Modern Electric Drives and Intelligent Control Systems, graduate course (2005-2008)

[Students Supervision/Co-supervision at Zhejiang University till December 2014]

1 14 PhD students (8 of them have received PhD degree)

2 38 MSc/MEng students (including 5 overseas students) (25 of them have received MSc/MEng degree)

3 123 undergraduate advisees (104 of them have received BEng degree)

Appendix M. Seminars and National Conference/Symposium Keynote Speeches

Appendix-M. Seminars and National Conference/Symposium Keynote

Speeches

[Seminars for other universities/institutes and industries]

1 14 March, 2008, Nanyang Technological University, Singapore ––

Sensorless Control of Permanent Magnet Brushless Motor Drives

2 25 November, 2009, China Shipbuilding Industry Corporation (CSIC) 705 Institute, Kunming, China ––

Permanent Magnet AC Motor Drives and Control

3 31 March, 2010, Warsaw University of Technology, Warsaw, Poland ––

(i) Permanent Magnet AC Motor Drives

(ii) Permanent Magnet Flux-Switching Machines

4 10 June, 2011, Xi’an Jiaotong University, Xi’an, China ––

Permanent Magnet AC Motor Drives

5 14 May, 2013, Yildiz Technical University, Istanbul, Turkey, supported by Turkish TUBITAK Program ––

(i) Design, Manufacture and Control Issues for High-Speed Permanent Magnet Brushless Machines

(ii) Permanent Magnet AC Motor Drives

(iii) Fuzzy Logic Speed Control of Permanent Magnet Brushless AC Drives

(iv) Permanent Magnet Flux-Switching Machines

6 14 October, 2013, The 2nd Youth Scholars Forum on Electrical Engineering by Natural Science Foundation

of China, Wuhan, China ––

Study on High-Speed Permanent Magnet Brushless Machines, a Review

7 17 November, 2013, Symposium of New Energy Conversion and Control, Shenzhen, China ––

Research and Development Trends of Electrical Machine Drives and Control

8 4 August, 2014, Xi’an Micromotor Research Institute, Xi’an, China ––

(i) High-Speed Permanent Magnet Brushless Machine Systems

(ii) Fuzzy Logic Speed Control of Permanent Magnet Brushless AC Motor

9 8 April, 2016, Forum of Advanced Electrical Machinery, the 120th Anniversary of Xi’an Jiaotong University,

Xi’an, China ––

An Overview of R&D Topics in the Field of Electrical Machines, Drives and Systems

10 15 April, 2016, Guizhou Linquan Electrical Machinery Co. Ltd., Guiyang, China ––


11 30 May, 2016, Midea Group, Shunde, China ––

Research and Applications of High-Speed Electrical Machines Systems

[Keynote speeches for national conferences/symposiums]

1 28 October, 2011, The 4th China Shengzhou Electrical Machinery Exhibition, Shengzhou, China ––

Development of Distinctive Electrical Machine Products

2 22 December, 2012, Annual Meeting of Zhejiang Provincial Electrical Machinery and Power Engineering

Society, Jiaxing, China ––


3 28 May, 2013, The 2nd Symposium on Designs and Applications of Electric Motor Drives and Control

Systems, Hangzhou, China ––


Appendix M. Seminars and National Conference/Symposium Keynote Speeches

4 29 May, 2014, The 3rd Symposium on Designs and Applications of Electric Motor Drives and Control

Systems (The 3rd Motor Driver and Control Designing and Application Technology Seminar), Hangzhou,

China ––

High-Speed Permanent Magnet Brushless Machine Systems

5 25 June, 2015, Coil Winding, Insulation and Electrical Manufacturing Exhibitions (CWIEME-Shanghai)

(organized by i2i Events Group), National Exhibition and Convention Centre, Shanghai, China ––

BLDC motor design and improvements in compressor technology

6 18 September, 2015, The 21st Innovation and Development Forum on Small and Special Electrical Machines

and Drives, and the 50th Anniversary of Xi’an Micromotor Research Institute, Xi’an, China ––

Study on Permanent Magnet Flux Switching Linear Machines, a Review

7 27 October, 2015, The 8th China Shengzhou Electrical Machinery Exhibition and Technical Forum,

Shengzhou, China ––

Analysis of Innovative Products and Techniques in the Electrical Machine Field

8 12 November, 2015, The 20th China (International) Small Motor Technology Conference & Exhibition,

Shanghai, China ––

Analysis of Prevalent Research Topics and Product Growth Points in the Electrical Machine Field

9 30 November, 2015, Development Symposium of Mechanical and Electrical Industries, Luqiao Taizhou,

China ––

Analysis of Innovative Products and Techniques in the Electrical Machine Field

10 14 April, 2016, The 3rd IET Fellow Forum, Guangzhou, China ––

High-Speed Electrical Machines and Systems

11 25 May, 2016, The 14th Shenzhen International Exhibition of Small Electrical Machines and Magnetic

Materials – The 2016 Shenzhen International Micro-Motor & Magnetic Materials Innovation & Application

Technology Forum, Shenzhen, China ––


12 26 May, 2016, The 2016 Annual Meeting of the Zhejiang Province Industry Association of Electrical

Machinery, Shengzhou, China ––


13 23 June, 2016, The 2016 Micro Motor Technology And Market Development Summit, Shenzhen, China ––


Documents

Shen, Jianxin 沈 建新 - IEEE Industry Applications Societyias.ieee.org/images/files/Elections/2016/SHEN-bio.pdf · Shen, Jianxin 沈 ... See notes in Appendix-B ... Special Electrical

Shen, Jianxin 沈建新 - IEEE Industry Applications Societyias.ieee.org/images/files/Elections/2016/SHEN-bio.pdf · Shen, Jianxin 沈 ... See notes in Appendix-B ... Special Electrical