Shimadzu Universal Testing Machines

UH Series

Shimadzu Universal Test ing Machines

C221-E3490C

A c q u i s i t i o n o f I S O 9 0 0 1 c e r t i f i c a t i o n

H i g h - p r e c i s i o n f o r c e m e a s u r e m e n t

V a r i o u s m e a s u r e m e n t m o d e s

A u t o m a t i c m e a s u r e m e n t

Shimadzu Universal Test ing Machines

P 04 - Features of UH-I

P 06 - Features of UH-FI

P 08 - Control Functions/Configuration

P 10 - Operation Unit

P 12 - Software

P 14 - Specifications Loading Unit

P 16 - Specifications Measurement&Control Unit

P 18 - Layout/Installation

Contents

As global environmental problems become more and more ser ious, mater ia ls are required to provide l ight weight, h igh strength and rel iabi l i ty. The UH Ser ies Shimadzu Universal Test ing Machines are new universal test ing machines that provide var ious funct ions enabl ing more accurate and simpl i f ied measurement of the strength required for var ious mater ia ls.

UH Series

The UH ser ies enable high-precis ion force measurement conforming to the global standards.

After a specimen is mounted, al l operat ions can be automat ical ly performed.

The UH ser ies provide var ious automat ic control programs as standard funct ions.

The UH ser ies are high-qual i ty products manufactured in the factory that acquired the ISO9001 cer t i f icat ion.

T h e U H - I s e r i e s s u p p o r t m a t e r i a l s t r e n g t h

t e s t s b y p r o v i d i n g r e l i a b l e d a t a .

4

Shimadzu Computer-control led hydraul ic servo system

The funct ions of the UH-I ser ies are great ly advanced, as compared with convent ional test ing machines.

UH-I

The large-sized LCD touch panel great ly s impl i f ies operat ions and enhances vis ib i l i ty.

The UH-I ser ies provide the graphical interface that enables var ious funct ionsto be operated on the one-touch panel .Dur ing a test , a S-S curve is plot ted in real t ime.

The UH-I ser ies newly provide var ious automat ic control programs as standard funct ions.

The metal tensile test control program is provided as a standard function (conforming to JIS Z2241)The single test control, cycle test control, high-temperature tensile test control, stroke speed 3-step switching control programs are provided as standard functions. Through the fully-closed loop automatic load control, the UH-I series enable stable and accurate tests.

Force auto-zero and auto-cal ibrat ion funct ions

The UH-I ser ies great ly s impl i fy operat ions by omit t ing t roublesome adjuster knob operat ions.

The non-revolv ing screw rod improves safety.

A specimen can be safely mounted and dismounted.

With var ious appl icat ion test ing equipment, the UH-I ser ies are appl icable to var ious tests.

Var ious test j igs, d isplacement measur ing equipment, atmosphere test ing equipment, test control programs, etc.(See the catalog for opt ional accessor ies.)

With connect ion to the opt ional data processing program, the UH-I ser ies enable high-speed test data sampl ing.

The UH-I ser ies perform data sampl ing at a high speed (5 ms max.) to obtain a true value. The UH-I series can be connected to a personal computer through the personal computer's standard RS-232C serial interface. Also, they can be connected to a notebook computer, saving the required space. (The GP-IB or another special interface is not necessary.)

5

T h e U H - F I s e r i e s p r o v i d e e a s y - t o - o p e r a t e

f r o n t - o p e n i n g h y d r a u l i c g r i p s .

6

ShimadzuComputer-control led hydraul ic servo systemWith Highly-ef f ic ient , f ront-opening hydraul ic gr ips

The UH-I ser ies advanced funct ions are fur ther upgraded.

UH-FI

Easy-to-operate f ront-opening hydraul ic gr ipsThe front-opening hydraul ic gr ips using the center hole hydraul ic cyl inder improves the ef f ic iency in removing a specimen and scale, and ensures safe operat ion.Also, these gr ips enable even long specimens to be easi ly mounted.These gr ips can be enhanced to the highly- funct ional , labor-saving model that has the automat ic gr ip face changing funct ions.

The compression plate can be easi ly mounted anddismounted

A wrench or other tool is not necessary.

A specimen gr ip posi t ion index is provided

With the specimen gr ip posi t ion index, the gr ips can easi ly and accurately gr ip a specimen.

The gr ip face holder is equipped with a safety stopper

The safety stopper prevents the r ight and lef t gr ip faces from coming into contactdue to erroneous operat ion, so that the gr ip faces wi l l not be damaged.

The UH -FI ser ies can be enhanced to a fu l ly -automated tensi le test system

All operat ions including specimen dimension measurement, specimen feeding operat ion, test data processing and char t d isplay can be automated.

7

High precision control using closed [ Computer-controlled hydraulic servo system ]

Measurement Control Unit

Control Functions

8

Lower crosshead elevating switch

Operation unit

Loading pump ON/OFF switch

Load control knob

Emergency stop switch

(3) Cycle test control NOTE 1)

(4) Stress test control (Metal tensile test control) (6) Stroke speed 3-step switching control

1st 2nd

Min. point

Switching point 2

Switching point 1

Max.point

Stroke

Constant-speed stroke control Constant-speed stroke control Constant-speed stroke control

Metal tensile test control is performed according to each standard (ISO 6892, EN 10002, JIS Z2241, ASTM E8M, etc.).

Stroke/force/strain cycle tests can be performed.

Stroke control for metal tensile test conforming to JIS Z2441

Constant-speedstress control

Constant-speedstress control

Switching point 2

Switching point 1

Displacement

Displacement

Stress

(1) Constant-speed control

Time

Control value

Controlvalue

(2) Constant-speed control -> Hold controlStroke/Force/Strain Stroke/Force/Strain

(5) High-temperature tensile test control

Force

3% of full-scaleforce

Time Time

Break

Break

This control mode automatically performs tensile tests according to JIS G0567.

Hold control (0 to 10 hours)

Hold control (0 to 10 hours)

Switching point

Constant-speedstroke control

Constant-speedstrain controlInitial stroke control

Control value

Time Time

NOTE 1) A optional oil cooling unit may be required depending on the installation conditions and operation conditions (for example, to perform hold control continuously for at least 30 minutes) (See p. 17.)NOTE 2) Various control modes are optionally available. (See p. 17.)

NOTE 3)Various cycle tests can be performed in the "Constant-speed control -> Hold control" modes by specifying the parameters repeatedly.

loop system

9

UH Series Configuration

Application testing equipment (Option)

Data processing/display/recording devices

Measurementcontrol functions

Tensile test jig

Compression test jig

Bending test jig

Atmosphere testing device

Displacement measuring device

Analog recorderX-TP type or X-YTP type

Analog force indicator

Simple dataprocessing unitDATA LETTY 531

Windows XP/2000/Me/NT4.0/98/95Software TRAPEZIUM2

Various controlfunctions

• Concrete test control

• Pattern control

• Display of force for specified elongation, etc.

Various jigs/devices

Universaltesting machine

Standardtest jigs

Standardcontrol functions

Loading unit

Measurementcontrol unit

Hydraulic system

Grip facesfor tensile test

Compressionplate forcompression test

Single control

Cycle control

Stress test control (Metal tensile test control)

High-temperaturetensile test control

Stroke speed 3-stepswitching control

The abundant functions improve

Measurement Control Unit (Operation Unit)

10

During a test, a S-S curve is displayed in real time.

The large-sized force/stroke data display can be easily read. The display can be switched to the stress value display mode or displacement value display mode with a touch of a button.

Since the testing machine's operating status and test conditions can be checked at a glance, an erroneous setting or erroneous operation can be prevented.

For frequently-used control switches, highly-durable mold type switches are used.

Test Condition Menu Screen File Operation Screen

Large character display

Operation keys

Testing machine operating status/test condition display

S-S curve display

The testing machine's functions can be visibly operated with the icon buttons. It can prevent erroneous operation, and improve the test efficiency.

The test condition changeover operation can be simplified by storing test conditions in a file of each test type.

the test efficiency.

11

Force Auto-calibration Function Auto/Full-Auto Force Range Switching Function

Auto-return Function

Break Detecting Function

Bilingual Function

PEAK/BREAK Value Display Function

Cycle Count Function

The electrical force calibration can be performed with a touch of a button, without the necessity of troublesome adjuster knob operations.

This function detects a specimen break to automatically stop the testing machine and return it to the origin.

Japanese or English can be selected on the LCD touch panel screen. The display language can be switched with a touch of a button on the screen.

When a recorder is connected, the force range is automatically changed immediately before the force output signal exceeds the full-scale value.

This function automatically returns the ram of the testing machine to the origin with a touch of a button. When the auto-return function is used together with the break detecting function, the testing machine automatically returns to the origin after detection of a specimen break.

The force, stress and strokes values at the maximum force point and break point are displayed during a test. When a displacement meter is connected, the displacement value at each point can be also displayed.

During a cycle test, the number of repeated load applied to the specimen is displayed. Also, this function can stop the test, or break the specimen in the preset cycle number.

The high-speed data sampling obtains Test Control & Data Processing

5 ms High-speed Sampling

The newest User Interface

12

For Windows® 95/98/NT4.0/2000/Me/XP UH Series Software

Part No. 345-47313

The TRAPEZIUM provides the easy-to-operate user interface, which is based on the global design incorporating the opinions of worldwide users and software experts.

A curve can be traced with the picking function

Screen customize function Useful on-line help

To monitor the change in the material completely, the UH series perform data sampling at an interval of 5 ms max. (for 100 seconds), enabling high-precision force measurement in the elastic region and break region. For normal sampling, the sampling interval can be set to 50 ms (max.), 100 ms or 150 ms.

High-speed sampling Normal sampling

100 seconds (max.)

Easy and flexible setting using wizard

Wizard Graph

Menu Customize On-line Help

Tensile, compression, 3-point bending, 4-point bending, Concrete, Shear, Friction, Tensile cycle, Compression cycle, 3-point bending cycle, 4-point bending cycle, Creep and Relaxation Tests

List of data processing items

The TRAPEZIUM provides a security function for preventing test data from being erroneously deleted or overwritten. With the ID and password predetermined for the manager or operator, the system enables only the menu and buttons necessary for each person to be operated. Also, the TRAPEZIUM provides the log file function that automatically records operation contents.

The TRAPEZIUM can be quickly linked to spreadsheet and word processing software. Test conditions, test results and sampling data can be exported in the "* .csv" format, and graphs can be exported in the "* .wmf" format.

Elastic modulus (4 types)

Upper yield point

Lower yield point

Yield strength point (2 points)

Intermediate force (5 points)

Intermediate displacement (5 points)

Maximum force point

Minimum force point

Break point

Joint elongation/reduction

Energy

Reciprocation energy

Hysteresis

n value, r value. Poisson's ratio

Arbitrary calculation formula (10 formulae)

The circle indicates an available data processing item.

Test data protection

Overwrite prevention

Password setting

Record of operation contents

Test result export

Link to spreadsheet andword processing software

English/Spanish/Chinese (Simplified/Traditional)/Korean/Portuguese/Japanese available (Other languages available on request)

Security functions

Tensile Compression 3-point bending 4-point bending Cycle Concrete Control(2 types) (1 type)

(Arbitrary number of points)

(Arbitrary number of points)

(Poisson's ratio)

a true value. Software (Option)

Test Data Protecting Security Function

13

Link to General-purpose Software

TRAPEZIUM2 is al l -around software

Loading Unit Standard SpecificationsStandard Series

14

Specifications

Capacity

Max. grip span (mm)

Grips for rod specimens (mm)

(Option)

Grips for flat plate specimens (Option)

(mm)

Max. compression plate span (mm)

Compression plate size (mm)

Max. support span (mm)

Support diameter x Width (mm)

Punch tip radius (mm)

Punch width (mm)

Motor capacity (3-phase)

(mm)

(mm)

(mm)

(Approx.)(mm/mim)

Motor capacity (3-phase)

900

ø12~50

With liner

0~45

(60 in width)

800

ø120

600

50 x 160

25

160

180 max.

5.5kW

250

450

750W

650

650 x 650

9kVA

50A

960 x 650 x 2400

700 x 1000 x 1070

1700

800

ø8~40

With liner

0~35

(50 in width)

720

ø100

500

30 x 130

15

130

100 max.

1.5kW

200

380

400W

500

500 x 500

3.5kVA

20A

780 x 500 x 2000

700 x 800 x 1070

900

800

ø8~40

With liner

0~35

(50 in width)

720

ø100

500

30 x 130

15

130

100 max.

1.5kW

200

380

400W

500

500 x 500

3.5kVA

20A

780 x 500 x 2000

700 x 800 x 1070

900

ø12~50

With liner

0~45

(60 in width)

800

ø120

600

50 x 160

25

160

80 max.

1.5kW

250

450

750W

650

650 x 650

4kVA

20A

960 x 650 x 2400

700 x 800 x 1070

1700

ø12~30

ø30~50

0~30,30~50

(60 in width)

800

ø120

600

50 x 160

25

160

80 max.

1.5kW

250

250

Hydraulic motor

650

650 x 650

6.6kVA

30A

1060 x 700 x 2900

700 x 800 x 1070

2600

900

1) The UH series provide the above loading speeds when no specimen is mounted and the oil temperature is 20°C or a higher temperature. 2) The hydraulic loading system is incorporated in the measurement control unit. (For the testing machines with 3000 kN or higher capacity, the hydraulic loading system is separately provided.)3) The standard testing machines provide force accuracy of within ±1.0% of the indicated value. With the optional high-precision type, the force accuracy is within ±0.5%.4) The transverse/bending test jigs are optionally available. 5) For a different paint color, contact Shimadzu or a local distributor. 6) In elasticity testing, one set of grip for rod specimens is included as standard equipment. Other types of grips are optional. Note: These standard grips are designed for use with specimens with a hardness of HRC40 or less. When using specimens harder than this, contact us and we will prepare high-hardness grips.

SI unitType

Part No.

UH-600kNI

346-43249

UH-200kNI

346-43051

UH-300kNI

346-43052

UH-500kNI

346-43053

UH-F500kNI

346-43070

Max. capacity

Force range (6 steps)

600kN

(60tf,135000Lbf)

600/300/120/60/30/12kN

300kN

(30tf,67500Lbf)

300/150/60/30/15/6kN

125

1.Tensile test

2.Compression test

5.Ram stroke

10. Recommended breaker capacity (3-phase, 200/220 V, 50/60 Hz)

9.Power supply capacity (3-phase, 200/220 V, 50/60 Hz)

12.Testing machine weight (Width x Depth x Height)

11.Testing machine size (Width x Depth x Height)

8.Effective table dimensions (Width x Depth)

7.Post span

6.Crossheadelevation speed(60 Hz)

4.Loading speed (60 Hz)

3.Transverse /bending test (Option)

Testing machine (kg)

Measurement control unit (kg)

Testing machine (mm)

Measurement control unit (mm)

NOTE

200kN

(20tf,45000Lbf)

200/100/40/20/10/4kN

500kN

(50tf,112500Lbf)

500/250/100/50/25/10kN

(Approx.)

15

Large-capacity Series

ø30~120

With liner

0~115

(120 in width)

1150

ø300

1000

80 x 250

40, 50

250

50 max.

7.5kW

350

350

3.7kW

1150

1150 x 1150

16kVA

100A

2200 x 1400 x 4800

700 x 800 x 1070

ø20~60

ø60~90,ø90~120

0~60,60~120

(120 in width)

1150

ø300

1000

80 x 250

40, 50

250

50 max.

7.5kW

350

350

5.5kW

1150

1150 x 1150

18kVA

100A

2200 x 1400 x 5900

700 x 800 x 1070

1400

ø20~110

With liner

0~105

(110 in width)

1000

ø280

1000

80 x 230

40, 50

230

50 max.

5.5kW

300

350

2.2kW

1000

1000 x 1000

11kVA

60A

1860 x 1100 x 3970

700 x 800 x 1070

1200

ø20~90

With liner

0~85

(90 in width)

950

ø220

900

70 x 200

30, 40

160

50 max.

5.5kW

300

350

1.5kW

850

850 x 850

10kVA

50A

1560 x 920 x 3400

700 x 1000 x 1070

ø20~55

ø55~90

0~45,45~90

(90 in width)

950

ø220

900

70 x 200

30, 40

160

50 max.

5.5kW

300

350

2.2kW

850

850 x 850

13kVA

75A

1560 x 920 x 4500

700 x 1000 x 1070

1100

ø12~70

With liner

0~65

(70 in width)

900

ø160

800

50 x 160

25

160

70 max.

2.2kW

250

400

1.5kW

750

750 x 750

6kVA

30A

1170 x 750 x 2800

700 x 800 x 1070

3500

ø12~40

ø40~70

0~35,35~70

(70 in width)

900

ø160

800

50 x 160

25

160

70 max.

2.2kW

250

200

Hydraulic motor

750

750 x 750

8kVA

50A

1320 x 800 x 3400

700 x 800 x 1070

6000

1000

NOTE The large-capacity series are produced at customers' request. For details, contact Shimadzu or a local distributor.

UH-4000kNI

346-43058

UH-F4000kNI

346-43074

UH-3000kNI

346-43057

UH-F3000kNI

346-43073

UH-2000kNI

346-43056

UH-F2000kNI

346-43072

UH-1000kNI

346-43055

UH-F1000kNI

346-43071

ø20~55

ø55~85

0~55,55~110

(110 in width)

1000

ø280

1000

80 x 230

40, 50

230

50 max.

5.5kW

300

350

3.7kW

1000

1000 x 1000

15kVA

75A

1860 x 1100 x 5700

700 x 800 x 1070

1000kN

(100tf,225000Lbf)

1000/500/200/100/50/20kN

2000kN

(200tf,450000Lbf)

2000/1000/400/200/100/40kN

3000kN

(300tf,675000Lbf)

3000/1500/600/300/150/60kN

4000kN

(400tf,9000000Lbf)

4000/2000/800/400/200/80kN

125

Measurement and Control Unit

16

Method

Accuracy Standard type

Computer-controlled electro-hydraulic servo system

Cylinder internal pressure measurement with high-precision pressure cell

Within ±1.0% of indicated value (when the force is 1/5 or more of the full scale for each force range)

*1(Conforming to JIS B7721 Class 1, ISO 7500/1 Class 1, and ASTM E4)

Within ±0.5% of indicated value (when the forece is 1/5 or more of the full scale for each force range)

*1 (Conforming to JIS B7721 Class 0.5, ISO 7500/1 Class 0, and ASTM E4)

x1, x2, x5, x10, x20 and x50 (6 steps)

Digital display Display resolution: 1/2000 (300 kN/600 kN/3000 kN: 1/3000)

Display unit: N, kN, kgf, tf, lbf

Analog display Scale plate diameter: 450 mm

Min. scale: 1/1000 (300 kN/600 kN/3000 kN: 1/600)

Digital display Display resolution: 1/2000 (300 kN/600 kN/3000 kN: 1/3000)

Display unit: kN

Measurement with optical encoder

Fully-closed loop automatic load control Display unit: mm, in

Digital display (Display resolution: 0.1 mm)

Single test control,Cycle test control (Triangular wave, Trapezoidal wave),Stress test control (Metal

tensile test control), High-temperature tensile test control, Stroke speed 3-step switching control

Ram stroke control Speed range: 0.5 mm/min(0.02 in /min) to Max. loading speed *2

Control range: Ram return point to Max. ram stroke

Force contro Speed range: 0.1 to 5.0 full-scale/min.

Control range: 5 to 100% of full-scale force

Strain control Speed range: 0.1 to 80% /min.

Control range: 5 to 100% of full-scale elongation

External analog input: 2 CH

External analog output: 2 CH

Recorder output: RS-232C interface

Two displacement meter amplifiers can be incorporated. (Option)

Force auto-zero function, Force auto-calibration function,

Break detecting function, Auto/Full-auto force range switching function, Auto-return function,

Arbitrary stroke speed setting function, Cycle count function, PEAK/BREAK value display function,

Stress value display function, Force value display function, Stroke value display function,

Displacement meter displacement value display function, Test condition file function,

Japanese/English display function, S-S curve display function, Manual load control function

Overload automatic stop function

(When the force value exceeds 102% of the full-scale value, the loading pump automatically stops.)

Control automatic stop function

(When the control deviation exceeds ±10% of the full-scale value, the test automatically stops.)

Emergency stop switch

*1 Calibration is required after installation to provide conformance.

*2 For the maximum loading speed, refer to the testing machine specifications.

1. Loading method

8. Safety devices

7. Standard functions

6. Input/output interface

5. Automatic load control

4. Stroke measurement display

3. Force display

2. Force measurement

High-precisiontype (Option)

Conformity with CE mark regulation

Test control functions

Range

Method

Analog indicator (Option)

Operation unit

Magnification

Standard Specifications

17

Testing Machine Loading Unit with Extended Post/Screw Rod

Optional Oil Cooling Unit Measurement Control Unit Extension Series

Universal Testing Machines Extension Series

To mount application testing equipment such as the bending test jig, thermostatic chamber and high-temperature furnace to the loading unit, extendedposts and screw rod may be required. Select the extension model depending on the occupied space of each testing equipment and the specimen size.

Standard gripspan(mm)

UH-I

UH-FI

Applicable testing machine Extension model S Extension model M Extension model L

NOTE 1) In the above table, the * mark indicates the extension length required to mount the thermostatic chamber or furnace. 2) The allowable tensile force is limited at the post extension part. The compression force will not be limited.

Part No.Allowable

tensile forceSeriesname

Capacity Extensionlength(mm) Part No.

Allowabletensile force

Extensionlength(mm) Part No.Allowable

tensile forceExtension

length(mm)

200/300

500

600

1000

2000

500

1000

2000

800

900

900

1000

1100

900

1000

1100

*300

*300

*200

*200

*300

*200

*200

320

800

1800

Full force

Full force

Full force

Full force

343-01072-03

343-01072-03

343-01073-02

343-01074-02

343-02525-03

343-02526-02

343-02527-02

*400

500Top plate attached







343-01071-04

343-01072-05

343-01072-05

343-01073-05

343-01074-05

343-02525-15

343-02526-15

343-02527-15









200/250 343-01071-06

343-01072-08

343-01072-08

343-01073-08

343-01074-08

343-02525-18

343-02526-18

343-02527-18

300

300

700

1700

200

500

1300

Full force

400

400

Full force

Full force

250

600

1500

When the extension series of universal testing machines are used together with the application testing equipment, a wider range of tests can be performed.For details, refer to the catalogs for the application testing equipment and application testing system.

200 · 300

500

600

1000

2000

343-01585

343-01585

343-01585

343-01585

343-01585-01

UH-I

UH-FI

NOTEConduct water supply/drain piping work to the position shown in the foundation reference drawing presented by Shimadzu Corporation.

Capacity Part No.Series name

To perform hold control or an equivalent test continuously

for 30 minutes or longer,the optional oil cooling unit may be

required. Concrete test control function

Constant-speed ram stroke controlRam return

Stressspeedcontrol 1

Stressspeedcontrol 2

1% of full-scale force

LIMITstress value

Force

Break detection

Time

Part No. 345-32722

To extend the automatic load control functions, the following control modes are available.

The stress speed is controlled according to the JIS A1108 concrete compression strength test method.

Display of force for specified elongation Part No. 345-32723

Force

Elongation(%)

Specifiedelongation

Specified elongation

This control mode conforms to the total elongation method for the JIS Z2241 proof stress measurement.

This control mode is used to provide the load pattern to obtain the limit of the product strength from a single specimen.

Pattern control function Part No. 345-32724

1st force limit

TimeTest end

Stroke (Force)

Final force limit

3rd force limit

Limit change value

2nd force limit

0

Layout/Installation

18

The following figures show the standard layout of Shimadzu Universal Testing Machines. To change the layout depending on the conditions of the installation place or a change in system configuration, examine the layout referring to these figures.

To install the universal testing machine, concrete foundation work is required. When purchasing this product, design and construct the foundation suitable for the conditions of the installation place (withstand strength of the ground, occupied space, etc.), referring to the foundation reference drawing presented by Shimadzu Corporation.

Occupied space recommended for the standard layout * For the dimensions of the testing machine loading unit and measurement control unit of each type, see p. 14 and 15.

Series name Capacity

200kN

300kN

500kN

600kN

1000kN

Recommended occupied space

(W x D x Hmm)

2800 x 2350 x 2500

2800 x 2350 x 2500

3000 x 2350 x 3000

3000 x 2550 x 3000

3300 x 2400 x 3500

Testing machine

UH-I

Unit:mmUnit:mm

Maintenance space Approx. 500

D

Equipment width

Loading unit

Floor surface

Leakage oil return unit (in pit)

W

D

Pit cover(prepared by user)

H

H

Equ

ipm

ent h

eigh

t


2000kN

3000kN

4000kN


(W x D x Hmm)

4600 x 3500 x 4000

5300 x 3900 x 5000

5800 x 4300 x 6000

Testing machine

UH-I

Work

ing s

pace

Appro

x. 1

000

Equip

ment

depth

W




Equipment width

Work

ing s

pace

Appro

x. 1

000

Equip

ment

depth



Loading unit

Floor surface

Equ

ipm

ent h

eigh

t

19

Avoid installing the UH series in the following harsh environments:In a place where a large temperature fluctuation is expected (Recommended temperature: +5°C to +40°C)In a place where high humidity is expected (Make sure no condensation occurs in the installation place.)In a dusty placeIn a place where the equipment is exposed to vibration (Recommended vibration amplitude: 5 μm or less)In a place contaminated by corrosive gasIn a place where the equipment is directly exposed to vaporIn a place where the equipment is directly exposed to sunlight

Conduct electric wiring work to the position shown in the foundation reference drawing.Avoid using a power supply with large voltage fluctuations.(Recommended voltage fluctuation level: Within ±10%)If voltage fluctuations cannot be avoided, use a constant-voltagepower supply.

1.Installation environment 2.Requirements for power supply

To mount the optional oil cooling unit, conduct water supply/drain piping work to the position shown in the foundation reference drawing presented by Shimadzu Corporation.

3.Cooling water

Hydraulic grip/crosshead elevation system

Hose stand

Hose stand

Hydraulic grip/crosshead elevation system

Leakage oil return unit(in pit)

W Equipment width

W

D

H

D

Unit:mm Unit:mm

Floor surface Floor surface

Pit cover(prepared by user)

H



(W x D x Hmm)

Testing machine

UH-FI 3100 x 3400 x 3500500kN


1000kN

2000kN

3000kN

4000kN


(W x D x Hmm)

4500 x 4200 x 4300

4600 x 4500 x 5400

5000 x 4700 x 7100

5500 x 5000 x 7500

Testing machine

UH-FI


Equipment width

Work

ing s

pace

Appro

x. 1

000

Equip

ment

depth



Loading unit

Equ

ipm

ent h

eigh

t

Loading unit

Equ

ipm

ent h

eigh

t


Maintenance spaceApprox. 500

Equip

ment depth


Work

ing s

pace

Appro

x. 1

000

Printed in Japan 4199-06603-20ATD

The contents of this brochure are subject to change without notice.

SHIMADZU CORPORATION. International Marketing Division3. Kanda-Nishikicho 1-chome, Chiyoda-ku, Tokyo 101-8448, Japan Phone: 81(3)3219-5641 Fax. 81(3)3219-5710URL http://www.shimadzu.com

Founded in 1875, Shimadzu Corporation, a leader in the development of advanced technologies, has a distinguished history of innovation built on the foundation of contributing to society through science and technology. We maintain a global network of sales, service, technical support and applications centers on six continents, and have established long-term relationships with a host of highly trained distributors located in over 100 countries. For information about Shimadzu, and to contact your local office, please visit our Web site at www.shimadzu.com

JQA-0376

Documents

Shimadzu Universal Testing Machines