Shirley Alexander 12619 Mint Field Houston, TX 77066 | (813) 781-4804 | [email protected] | www.linkedin/in/shirleysalexander Objective I am a Structural Engineer in Training with two years of experience in structural design. My desire is to work on a motivated team where I can grow in my career and use the skills that I have acquired to bring success to my team. Education BACHELOR OF SCIENCE IN CIVIL ENGINEERING | MAY 2011 | UNIVERSITY OF SOUTH FLORIDA · Related coursework: Prestressed Concrete, Project Management, Structures, Construction Management. Numerical and Computer Tools, Fluids Experience ENGINEER IN TRAINING | CONCEPT ENGINEERS, HOUSTON, TX | MARCH 2016-JULY 2016 · Redesign of 2 story framing plans to accommodate new elevation changes. · Assisted in drafting shear walls as well as framing. · Designed Simpson strong walls and calculated loads for IBC portal frames Accomplishments: · I was in charge of wind design for all projects, which included custom built single family dwellings, within one month. PROJECT ENGINEER | INTEGRITY STRUCTURAL CORP., HOUSTON, TX | FEBRUARY 2014- JANUARY 2016 · Reviewed structural construction documents in preparation for permit, progress sets and ultimately construction issue. · Insured compliance with the appropriate IBC, ASCE, and ACI codes and regulations. · Researched and reviewed relevant codes and regulations for multiple states and municipalities. · I worked on multiple types of projects which included hotels, single and multi-family dwellings, and apartments to successful completion of the construction set drawings within the allotted deadlines. · My duties included but were not limited to: · Design of wood and steel flexure beams · Design of wood connections using Simpson hardware and NDS design book · Design of 2 story wood and steel columns · Responding to RFI’s when received within the specified deadline · Calculation of wind and earthquake loads to complete the lateral load analysis and design shear walls · Design of post tension and conventional reinforced foundations Accomplishments: · I began coordinating with consultants and clients within 6 months. · I ran point on multiple projects from coordination meetings to the construction set drawings with minimal supervision within one year.

Shirley Alexander Resume

Download DOCX Report

Upload
shirley-alexander
View
32
Download
0

Embed Size (px)

Citation preview

‍‍Shirley‍Alexander12619‍Mint‍Field‍Houston,‍TX‍77066 | (813)‍781-4804 | [email protected]‍|‍www.linkedin/in/shirleysalexander

ObjectiveI am a Structural Engineer in Training with two years of experience in structural design. My desire is to work on a motivated team where I can grow in my career and use the skills that I have acquired to bring success to my team.

EducationBACHELOR OF SCIENCE IN CIVIL ENGINEERING | MAY 2011 | UNIVERSITY OF SOUTH FLORIDA

· Related‍coursework:‍Prestressed‍Concrete,‍Project‍Management,‍Structures,‍Construction‍Management.‍Numerical‍and‍Computer‍Tools,‍Fluids

ExperienceENGINEER IN TRAINING | CONCEPT ENGINEERS, HOUSTON, TX | MARCH 2016-JULY 2016

· Redesign‍of‍2‍story‍framing‍plans‍to‍accommodate‍new‍elevation‍changes.‍

· Assisted‍in‍drafting‍shear‍walls‍as‍well‍as‍framing.

· Designed‍Simpson‍strong‍walls‍and‍calculated‍loads‍for‍IBC‍portal‍frames

Accomplishments:

· I‍was‍in‍charge‍of‍wind‍design‍for‍all‍projects,‍which‍included‍custom‍built‍single‍family‍dwellings,‍within‍one‍month.

PROJECT ENGINEER | INTEGRITY STRUCTURAL CORP., HOUSTON, TX | FEBRUARY 2014- JANUARY 2016

· Reviewed‍structural‍construction‍documents‍in‍preparation‍for‍permit,‍progress‍sets‍and‍ultimately‍construction‍issue.

· Insured‍compliance‍with‍the‍appropriate‍IBC,‍ASCE,‍and‍ACI‍codes‍and‍regulations.

· Researched‍and‍reviewed‍relevant‍codes‍and‍regulations‍for‍multiple‍states‍and‍municipalities.‍‍

· I‍worked‍on‍multiple‍types‍of‍projects‍which‍included‍hotels,‍single‍and‍multi-family‍dwellings,‍and‍apartments‍to‍successful‍completion‍of‍the‍construction‍set‍drawings‍within‍the‍allotted‍deadlines.

· My duties included but were not limited to:

· Design‍of‍wood‍and‍steel‍flexure‍beams‍

· Design‍of‍wood‍connections‍using‍Simpson‍hardware‍and‍NDS‍design‍book

· Design‍of‍2‍story‍wood‍and‍steel‍columns

· Responding‍to‍RFI’s‍when‍received‍within‍the‍specified‍deadline

· Calculation‍of‍wind‍and‍earthquake‍loads‍to‍complete‍the‍lateral‍load‍analysis‍and‍design‍shear‍walls

· Design‍of‍post‍tension‍and‍conventional‍reinforced‍foundations

Accomplishments:

· I‍began‍coordinating‍with‍consultants‍and‍clients‍within‍6‍months.‍

· I‍ran‍point‍on‍multiple‍projects‍from‍coordination‍meetings‍to‍the‍construction‍set‍drawings‍with‍minimal‍supervision‍within‍one‍year.

CertificationsENGINEER IN TRAINING | AUGUST 2011- PRESENT | FLORIDA

· License Number:‍‍1100016956‍‍‍‍‍‍‍‍‍‍