Shop drawing submittal cover sheets 250 design build 2007 ddc... · 3/29/2006 Level 1 VAV Valve L/s GPM PD Type Return Fail Design CV Actual CV Size Model Actuator 1 VAV-101 0.12

hou le e lect r ic l im i ted #19-831 Devonshire Road, Victoria V9A 4T5

TEL: (250) 388-5665 · FAX (250) 388-5811

www.houle.ca

THE POWER IN ELECTRICAL CONTRACTING – Building Strength Through Successful Partnerships OPERATING THROUGHOUT WESTERN CANADA SINCE 1944

CORPORATE HEAD OFF ICE · VANCOUVER BRANCH OFF ICES IN · NANAIMO · PR INCE GEORGE · V ICTORIA

·TRANSMITTAL·

To: Windly Contracting Ltd. Date: March 29, 2006 Attn: Cliff Thompson Page(s): 1 Address: 3711 Shenton Road Nanaimo, BC V9T 2H1 Project: SCHOOL OF MGT CENTRE, MALASPINA Job No.: 3004-0004 We transmit: Action Required:

Via Courier Drawings For Your Information

Via Mail Shop Drawings Review & Comment

Via Fax Correspondence Returned As Requested

Via Hand Other As Noted

Copies: Description: 1 Control shop drawings in hard and soft format

Joe LeRoy, P.Eng. Controls Project Manager/Estimator HOULE ELECTRIC LIMITED

Malaspina University-College School of Management Centre 900 Fifth Street, Nanaimo BC

DDC Controls Shop Drawing Submittal

Submitted To:

Windley Contracting Ltd. 3711 Shenton Road Nanaimo, British Columbia V9T 2H1

Submitted By: Joe LeRoy, P.Eng 19-831 Devonshire Rd. Victoria, BC V9A 4T5 250 388-5665

Submittal Details:

Date Submitted: 3/30/2006 Date Resubmitted: Specification Section: 15900.2.7&2.8 Description: Valve Schedule Model:

Supplier info:

Name: Address:

Manufacturer info: Name: Address: Website

houle controls (a div. of houle electric ltd.)

3/29/2006

Level 1 VAV Valve L/s GPM PD Type Return FailDesign

CVActual

CV Size Model Actuator1 VAV-101 0.12 1.902 3 2m non-spring 1.1 1.2 12 b210 tr24-sr-t us2 VAV-102 0.16 2.536 3 2m non-spring 1.5 1.9 12 b211 tr24-sr-t us3 VAV-103 0.12 1.902 3 2m non-spring 1.1 1.2 12 b210 tr24-sr-t us4 VAV-104 0.85 13.4725 3 2m non-spring 7.8 10.0 12 b215 tr24-sr-t us5 VAV-105 0.14 2.219 3 3m non-spring 1.3 1.9 12 b311 tr24-sr-t us6 VAV-106 0.06 0.951 3 2m non-spring 0.5 0.8 12 b209 tr24-sr-t us7 VAV-107 0.13 2.0605 3 3m non-spring 1.2 1.2 12 b310 tr24-sr-t us8 VAV-108 0.13 2.0605 3 2m non-spring 1.2 1.2 12 b210 tr24-sr-t us9 VAV-109 0.06 0.951 3 2m non-spring 0.5 0.8 12 b209 tr24-sr-t us


CVActual

CV Size Model Actuator10 VAV-201 0.11 1.7435 3 2m non-spring 1.0 1.2 12 b210 tr24-sr-t us11 VAV-202 0.13 2.0605 3 2m non-spring 1.2 1.2 12 b210 tr24-sr-t us12 VAV-203 0.19 3.0115 3 2m non-spring 1.7 1.9 12 b211 tr24-sr-t us13 VAV-204 0.1 1.585 3 3m non-spring 0.9 1.2 12 b310 tr24-sr-t us14 VAV-205 0.11 1.7435 3 3m non-spring 1.0 1.2 12 b310 tr24-sr-t us15 VAV-206 0.08 1.268 3 2m non-spring 0.7 0.8 12 b209 tr24-sr-t us16 VAV-207 0.1 1.585 3 2m non-spring 0.9 1.2 12 b210 tr24-sr-t us17 VAV-208 0.1 1.585 3 2m non-spring 0.9 1.2 12 b210 tr24-sr-t us18 VAV-209 0.2 3.17 3 2m non-spring 1.8 1.9 12 b211 tr24-sr-t us


CVActual

CV Size Model Actuator19 VAV-301 0.15 2.3775 3 3m non-spring 1.4 1.9 12 b311 tr24-sr-t us20 VAV-302 0.08 1.268 3 2m non-spring 0.7 0.8 12 b209 tr24-sr-t us21 VAV-303 0.07 1.1095 3 2m non-spring 0.6 0.8 12 b209 tr24-sr-t us22 VAV-304 0.09 1.4265 3 2m non-spring 0.8 0.8 12 b209 tr24-sr-t us23 VAV-305 0.09 1.4265 3 2m non-spring 0.8 0.8 12 b209 tr24-sr-t us24 VAV-306 0.01 0.1585 3 2m non-spring 0.1 0.3 12 b207 tr24-sr-t us25 VAV-307 0.06 0.951 3 2m non-spring 0.5 0.8 12 b209 tr24-sr-t us26 VAV-308 0.07 1.1095 3 2m non-spring 0.6 0.8 12 b209 tr24-sr-t us27 VAV-309 0.08 1.268 3 3m non-spring 0.7 0.8 12 b309 tr24-sr-t us28 VAV-310 0.03 0.4755 3 2m non-spring 0.3 0.3 12 b207 tr24-sr-t us29 VAV-311 0.03 0.4755 3 2m non-spring 0.3 0.3 12 b207 tr24-sr-t us30 VAV-312 0.04 0.634 3 2m non-spring 0.4 0.5 12 b208 tr24-sr-t us


CVActual

CV Size Model Actuator31 VAV-401 0.04 0.634 3 2m non-spring 0.4 0.5 12 b208 tr24-sr-t us32 VAV-402 0.05 0.7925 3 2m non-spring 0.5 0.8 12 b209 tr24-sr-t us33 VAV-403 0.05 0.7925 3 2m non-spring 0.5 0.8 12 b209 tr24-sr-t us34 VAV-404 0.11 1.7435 3 2m non-spring 1.0 1.2 12 b210 tr24-sr-t us35 VAV-405 0.03 0.4755 3 2m non-spring 0.3 0.3 12 b207 tr24-sr-t us36 VAV-406 0.09 1.4265 3 2m non-spring 0.8 0.8 12 b209 tr24-sr-t us37 VAV-407 0.06 0.951 3 2m non-spring 0.5 0.8 12 b209 tr24-sr-t us38 VAV-408 0.08 1.268 3 3m non-spring 0.7 0.8 12 b309 tr24-sr-t us39 VAV-409 0.13 2.0605 3 3m non-spring 1.2 1.2 12 b310 tr24-sr-t us40 VAV-410 0.03 0.4755 3 2m non-spring 0.3 0.3 12 b207 tr24-sr-t us41 VAV-411 0.05 0.7925 3 2m non-spring 0.5 0.8 12 b209 tr24-sr-t us42 VAV-412 1.08 17.118 3 2m non-spring 9.9 10.0 12 b215 tr24-sr-t us43 VAV-413 0.07 1.1095 3 2m non-spring 0.6 0.8 12 b209 tr24-sr-t us44 VAV-414 0.05 0.7925 3 2m non-spring 0.5 0.8 12 b209 tr24-sr-t us

Convectors Valve L/s GPM PD Type Return FailDesign

CVActual

CV Size Model Actuator45 CNVT-1 0.03 0.4755 3 2m non-spring 0.3 0.3 12 b207 tr24-sr-t us46 CNVT-2 0.03 0.4755 3 2m non-spring 0.3 0.3 12 b207 tr24-sr-t us47 CNVT-3 0.03 0.4755 3 2m non-spring 0.3 0.3 12 b207 tr24-sr-t us48 CNVT-4 0.03 0.4755 3 2m non-spring 0.3 0.3 12 b207 tr24-sr-t us49 CNVT-7 0.03 0.4755 3 2m non-spring 0.3 0.3 12 b207 tr24-sr-t us50 CNVT-8 0.03 0.4755 3 2m non-spring 0.3 0.3 12 b207 tr24-sr-t us51 CNVT-9 0.03 0.4755 3 2m non-spring 0.3 0.3 12 b207 tr24-sr-t us52 CUH-1 0.11 1.7435 3 2m spring open 1.0 1.2 12 b210 tr24-sr-t us

MISC Valve L/s GPM PD Type Return FailDesign

CVActual

CV Size Model Actuator53 2ndry mix 6.14 97.319 4 3m spring atoab 48.7 65.0 65 g765 af24-mft us54 trap 1 0 3 2p spring close 0.0 12 ZONE215N-35 ZONE24NC55 trap 2 0 3 2p spring close 0.0 12 ZONE215N-36 ZONE24NC56 trap 3 0 3 2p spring close 0.0 12 ZONE215N-37 ZONE24NC57 trap 4 0 3 2p spring close 0.0 12 ZONE215N-38 ZONE24NC58 trap 5 0 3 2p spring close 0.0 12 ZONE215N-39 ZONE24NC

Malaspina School of Mgt Pts List 29Mar06.xls Control Valve Schedule 1 of 1



Submitted To:



Submittal Details:

Date Submitted: 3/30/2006 Date Resubmitted: Specification Section: 15900.2.7&2.8 Description: 65mm 3-way mod spring return characterized control valve Model: G765 c/w AF24-MFT US

Supplier info:

Name: Belimo Aircontrols (CAN), Inc. Address: 20893 Yeomans Cres., Langley, BC V1M 2P8

Manufacturer info: Name: Belimo Aircontrols (CAN), Inc. Address: 20893 Yeomans Cres., Langley, BC V1M 2P8 Website www.belimo.com


G204

94 -

03/0

5 - S

ubje

ct to

cha

nge.

© B

elim

o Ai

rcon

trols

(USA

), In

c.

19

®

Options (add to list price) AF24 US AF24-MFT US 2x AF24 US 2x AF24-MFT USbuilt-in aux. switch* AF…-S US120 VAC power supply AF120…0-135Ω control AF24-MFT95 US

* For tandem actuators – only one of the two actuators is provided with switch.‡ Add to …-MFT price.

AF… 2x AF…

G7 Series Flanged Globe Valve, Spring Return ActuatorThree-way Valve with Bronze Trim – ANSI 125 Flanged, Mixing and Diverting

G7… D Three-way Diverting Flanged Globe Valve with Spring Return ActuatorValve Spring Return Actuator

Model Cv Valve On/Off Proportional / MFT# Nominal Size Close-

Flanged Off AF24 US AF24-MFT US†Valve Inches Type psi 2x AF24 US 2x AF24-MFT US†

G765D 68 2-1/2” ANSI 125 100 Pg 80 Pg 80G780D 85 3” ANSI 125 100 Pg 80 Pg 80G7100D 154 4” ANSI 125 100 Pg 80 Pg 80G7125D 195 5” ANSI 125 100 Pg 80 Pg 80G7150D 248 6” ANSI 125 100 Pg 80 Pg 80

For fail safe operation where AF actuator is not available or close-off is too low, use GM actuator with NSV battery backup.† Specify when ordering proportional (P-10001) 2-10 VDC, floating point (P-30001), on/off (P-40002) for AF actuators.

AF24

US

2x

AF24

-MFT

US

2x

G7 Three-way Mixing Flanged Globe Valve with Spring Return ActuatorValve Spring Return Actuator

Model Cv Valve On/Off Proportional / MFT# Nominal Size Close-

Flanged Off AF24 US AF24-MFT US†Valve Inches Type psi 2x AF24 US 2x AF24-MFT US†G765 68 2-1/2” ANSI 125 41 Pg 68 Pg 68G780 91 3” ANSI 125 28 Pg 68 Pg 68G7100 190 4” ANSI 125 9 Pg 68 Pg 68G765 68 2-1/2” ANSI 125 82 Pg 68 Pg 68G780 91 3” ANSI 125 57 Pg 68 Pg 68G7100 190 4” ANSI 125 16 Pg 68 Pg 68G7125 280 5” ANSI 125 10 Pg 68 Pg 68G7150 340 6” ANSI 125 7 Pg 68 Pg 68

† Specify when ordering proportional (P-10001) 2-10 VDC, floating point (P-30001), on/off (P-40002) for AF actuators.

AF24

US

2x A

F24

US

AF24

-MFT

US2x

AF2

4-M

FT U

S

‡

vicengineer5004

Right

vicengineer5004

Right



Submitted To:



Submittal Details:

Date Submitted: 3/30/2006 Date Resubmitted: Specification Section: 15900.2.7&2.8 Description: 12mm 2-way mod non-spring return characterized control valve Model: B207 to B215 c/w TR24-SR-T US

Supplier info:




14

G204

93 -

03/0

5 - I

G-Su

bjec

t to

chan

ge. ©

Bel

imo

Airc

ontro

ls (U

SA),

Inc.

®

NM24

US

B2 Series Characterized Control Valve,™ Non-Spring Return Actuator Two-way Valve with Stainless Steel Ball and Stem, NPT female ends

AM…

TR24-3-T USOptions (add to list price) TR24-SR-T US LR24-3 USbuilt-in aux. switch LR…-S US Pg 443-foot cable TR24-3 US, TR24-SR US Pg 40/426-foot cable TR…/200 US, LR…/200 US Pg 40/42 Pg 4410-foot cable TR…/300 US, LR…/300 US Pg 40/42 Pg 44

NM…LR…TR…

B2 Two-way Characterized Control Valve, Stainless Steel Ball and StemValve Non-Spring Return Actuator

On/Off, Floating On/Off, Floating Proportional Proportional Proportional / MFT

Model Cv Valve Close-# Rating Nominal Size Off LR24-3 US LR24-SR US LR24-MFT US

CCV DN psi TR24-3-T US NM24 US TR24-SR-T US NM24-SR US NM24-MFT USValve Inches mm AM24 US AM24-MFT USB207 0.3 1/2” 15 200 Pg 40 Pg 44 Pg 42 Pg 46 Pg 48B208 0.46 1/2” 15 200 Pg 40 Pg 44 Pg 42 Pg 46 Pg 48B209 0.8 1/2” 15 200 Pg 40 Pg 44 Pg 42 Pg 46 Pg 48B210 1.2 1/2” 15 200 Pg 40 Pg 44 Pg 42 Pg 46 Pg 48B211 1.9 1/2” 15 200 Pg 40 Pg 44 Pg 42 Pg 46 Pg 48B212 3.0 1/2” 15 200 Pg 40 Pg 44 Pg 42 Pg 46 Pg 48B213 4.7 1/2” 15 200 Pg 40 Pg 44 Pg 42 Pg 46 Pg 48B214 7.4 1/2” 15 200 Pg 40 Pg 44 Pg 42 Pg 46 Pg 48B215* 10 1/2” 15 200 Pg 40 Pg 44 Pg 42 Pg 46 Pg 48B217 4.7 3/4” 20 200 Pg 40 Pg 44 Pg 42 Pg 46 Pg 48B218 7.4 3/4” 20 200 Pg 40 Pg 44 Pg 42 Pg 46 Pg 48B219 10 3/4” 20 200 Pg 40 Pg 44 Pg 42 Pg 46 Pg 48B220* 24 3/4” 20 200 Pg 40 Pg 44 Pg 42 Pg 46 Pg 48B222 7.4 1” 25 200 Pg 44 Pg 46 Pg 48B223 10 1” 25 200 Pg 44 Pg 46 Pg 48B224 19 1” 25 200 Pg 44 Pg 46 Pg 48B225* 30 1” 25 200 Pg 44 Pg 46 Pg 48B229 10 1-1/4” 32 200 Pg 44 Pg 46 Pg 48B230* 19 1-1/4” 32 200 Pg 44 Pg 46 Pg 48B231 25 1-1/4” 32 200 Pg 50 Pg 52 Pg 54B232* 37 1-1/4” 32 200 Pg 50 Pg 52 Pg 54B238 19 1-1/2” 40 200 Pg 50 Pg 52 Pg 54B239 29 1-1/2” 40 200 Pg 50 Pg 52 Pg 54B240* 37 1-1/2” 40 200 Pg 50 Pg 52 Pg 54B248 29 2” 50 200 Pg 50 Pg 52 Pg 54B249 46 2” 50 200 Pg 50 Pg 52 Pg 54B250* 57 2” 50 200 Pg 50 Pg 52 Pg 54B251 65 2” 50 100 Pg 56 Pg 58B252 85 2” 50 100 Pg 56 Pg 58B253 120 2” 50 100 Pg 56 Pg 58B254* 240 2” 50 100 Pg 56 Pg 58B261 60 2.5” 65 100 Pg 56 Pg 58B262 75 2.5” 65 100 Pg 56 Pg 58B263 110 2.5” 65 100 Pg 56 Pg 58B264 150 2.5” 65 100 Pg 56 Pg 58B265* 210 2.5” 65 100 Pg 56 Pg 58B277 70 3” 80 100 Pg 56 Pg 58B278 130 3” 80 100 Pg 56 Pg 58B280* 170 3” 80 100 Pg 56 Pg 58Electrical Covered 3 ft cable, Covered Terminal 3 ft cable, 3 ft cable,Connection Terminal Strip 1/2” conduit Strip 1/2” conduit 1/2” conduit

fitting fitting fitting

* Models without characterizing discs. See pg 11 for corrected Cvs with piping reduction factor. See pg 132 for MFT Configuration.

TR24

-3-T

US

LR24

-3 U

S

TR24

-SR-

T US

LR24

-SR

US

LR24

-MFT

US

AM24

-MFT

US

NM24

-SR

US

NM24

-MFT

US

AM24

US

vicengineer5004

Right

vicengineer5004

Right

vicengineer5004

Right

vicengineer5004

Right

vicengineer5004

Right

vicengineer5004

Right

vicengineer5004

Right

vicengineer5004

Right

vicengineer5004

Right

vicengineer5004

Right

42

G204

93 -

03/0

5 - I

G-Su

bjec

t to

chan

ge. ©

Bel

imo

Airc

ontro

ls (U

SA),

Inc.

®B2 Two-way Characterized Control Valve, Stainless Steel Ball and StemTR Actuators, ProportionalTechnical Data/Submittal

Actuator Specifications

TR24-SR-T USReversing switch under cover

Control ProportionalInput Impedance 100 kΩNominal voltage 24 VAC 50/60 Hz, 24VDC

Nominal voltage range 19.2…28.8 VAC, 21.6…28.8 VDCPower Consumption 0.5 WTransformer Sizing 1VA (Class 2 power source)Electrical Connection Screw Terminals accessible after

removal of small cover (3 ft, 6 ft, 10 ft cables optional)

Angle of Rotation 90°Torque 18 in-lbs (2Nm)Position Indication Integrated into handleManual override: Push down handleRunning Time 90 seconds Humidity 5 to 95% non-condensingAmbient Temperature 19°F to 122°F (-7°C to +50°C)Storage Temperature -40°F to 176°F (-40°C to +80°C)Housing NEMA 1Housing Rating UL94-5V(B)Agency Listing CE, UL 60730-1

EMC CE according to 89/336/EECMode of Operation Type 1 to UL 60730-1

Noise Level max. 35 db (A)Quality Standard ISO 9001

Additional Models

TR24-SR US TR24-SR-T US with 3 ft plenum rated cable

TR24-SR/200 US TR24-SR-T US with 6 ft plenum rated cable


©

Valve Specifications

Service chilled or hot water, 60% glycolFlow characteristic A port equal percentage Action Max 95° rotationSizes 1/2”, 3/4”Type of end fitting female, NPTMaterials:

Body forged brass, nickel platedBall stainless steel Stem stainless steel Seats fiberglass reinforced teflon® PTFECharacterizing disc TEFZEL®

Packing 2 EPDM O-rings, lubricatedPressure rating 600 psi Media temp. range 0°F to 212°F [-18°C to 100°C]Close off pressure 200 psiMaximum differential: For Characterized A-port pressure (∆P) 20 psi for typical applications

30 psi max for quiet service

For full flow versions only (no A-disc) On/Off control 150 psi

Leakage 0%Cv rating A port: see product chart for values

Tefzel® is a registered trademark of DuPont

See Selection Chart Pg 14 for Control Valve No., Cv and Close-off

Application

This valve is typically used in air handling units on heating orcooling coils, and fan coil unit heating or cooling coils. Someother common applications include Unit Ventilators, VAV Boxreheat coils and bypass loops. This valve is suitable for use ina hydronic system with variable flow. This valve is designedfor modulating control using 2...10VDC or 4...20mA. (for4...20mA control input a 500 ohm resistor is required).

The valve is designed to fit in compact areas where propor-tional control is required using 24 VAC/VDC.

vicengineer5004

Right



Submitted To:



Submittal Details:

Date Submitted: 3/30/2006 Date Resubmitted: Specification Section: 15900.2.7&2.8 Description: 12mm 3-way mod non-spring return characterized control valve Model: B309 to B311 c/w TR24-SR-T US

Supplier info:




G204

93 -

03/0

5 - I

G-Su

bjec

t to

chan

ge. ©

Bel

imo

Airc

ontro

ls (U

SA),

Inc.

15

®

TR24-3-T USOptions (add to list price) TR24-SR-T US LR24-3 USbuilt-in aux. switch LR…-S US Pg 643-foot cable TR24-3 US, TR24-SR US Pg 60/626-foot cable TR…/200 US, LR…/200 US Pg 60/62 Pg 6410-foot cable TR…/300 US, LR…/300 US Pg 60/62 Pg 64

LR… NM…

B3 Series Characterized Control Valve,™ Non-Spring Return Actuator Three-way Valve with Stainless Steel Ball and Stem, NPT female ends

TR…

B3 Three-way Characterized Control Valve, Stainless Steel Ball and StemValve Non-Spring Return Actuator

Model Cv Valve On/Off, Floating On/Off, Floating Proportional Proportional Proportional / MFT

# Rating Nominal Size Close-CCV DN Off TR24-3-T US LR24-3 US TR24-SR-T US LR24-SR US LR24-MFT USValve Inches mm psi NM24 US NM24-SR US NM24-MFT USB307 0.3 1/2” 15 200 Pg 60 Pg 64 Pg 62 Pg 66 Pg 68B308 0.46 1/2” 15 200 Pg 60 Pg 64 Pg 62 Pg 66 Pg 68B309 0.8 1/2” 15 200 Pg 60 Pg 64 Pg 62 Pg 66 Pg 68B310 1.2 1/2” 15 200 Pg 60 Pg 64 Pg 62 Pg 66 Pg 68B311 1.9 1/2” 15 200 Pg 60 Pg 64 Pg 62 Pg 66 Pg 68B312 3.0 1/2” 15 200 Pg 60 Pg 64 Pg 62 Pg 66 Pg 68B313 4.7 1/2” 15 200 Pg 60 Pg 64 Pg 62 Pg 66 Pg 68B315* 10 1/2” 15 200 Pg 60 Pg 64 Pg 62 Pg 66 Pg 68B317 4.7 3/4” 20 200 Pg 60 Pg 64 Pg 62 Pg 66 Pg 68B318 7.4 3/4” 20 200 Pg 60 Pg 64 Pg 62 Pg 66 Pg 68B320* 24 3/4” 20 200 Pg 60 Pg 64 Pg 62 Pg 66 Pg 68B322 7.4 1” 25 200 Pg 64 Pg 66 Pg 68B323 10 1” 25 200 Pg 64 Pg 66 Pg 68B325* 30 1” 25 200 Pg 64 Pg 66 Pg 68B329 10 1-1/4” 32 200 Pg 64 Pg 66 Pg 68B330* 19 1-1/4” 32 200 Pg 64 Pg 66 Pg 68B331 25 1-1/4” 32 200 Pg 70 Pg 72 Pg 74B332* 37 1-1/4” 32 200 Pg 70 Pg 72 Pg 74B338 19 1-1/2” 40 200 Pg 70 Pg 72 Pg 74B339 29 1-1/2” 40 200 Pg 70 Pg 72 Pg 74B340* 37 1-1/2” 40 200 Pg 70 Pg 72 Pg 74B348 29 2” 50 200 Pg 70 Pg 72 Pg 74B349 46 2” 50 200 Pg 70 Pg 72 Pg 74B350* 57 2” 50 200 Pg 70 Pg 72 Pg 74Electrical Covered 3 ft cable, Covered Terminal 3 ft cable, 3 ft cable,Connection Terminal Strip 1/2” conduit Strip 1/2” conduit 1/2” conduit

fitting fitting fitting

* Models without characterizing discs.

See pg 132 for MFT Configuration.

TR24

-3-T

US

LR24

-3 U

S

TR24

-SR-

T US

LR24

-SR

US

LR24

-MFT

US

NM24

-MFT

US

NM24

-SR

US

NM24

US

vicengineer5004

Right

vicengineer5004

Right

vicengineer5004

Right

vicengineer5004

Right

62

G204

93 -

03/0

5 - I

G-Su

bjec

t to

chan

ge. ©

Bel

imo

Airc

ontro

ls (U

SA),

Inc.

®B3 Three-way Characterized Control Valve, Stainless Steel Ball and StemTR Actuators, ProportionalTechnical Data/Submittal


TR24-SR-T USReversing switch under cover

Control ProportionalInput Impedance 100 kΩNominal voltage 24 VAC 50/60 Hz, 24VDC

Nominal voltage range 19.2…28.8 VAC, 21.6…28.8 VDCPower Consumption 0.5 WTransformer Sizing 1VA (Class 2 power source)Electrical Connection Screw Terminals accessible after

removal of small cover (3 ft, 6 ft, 10 ft cables optional)

Angle of Rotation 90°Torque 18 in-lbs (2Nm)Position Indication Integrated into HandleManual override: Push down handleRunning Time 90 seconds Humidity 5 to 95% non-condensingAmbient Temperature 19°F to 122°F (-7°C to +50°C)Storage Temperature -40°F to 176°F (-40°C to +80°C)Housing NEMA 1Housing Rating UL94-5V(B)Agency Listing CE, UL 60730-1

EMC CE according to 89/336/EECMode of Operation Type 1 to UL 60730-1

Noise Level max. 35 db (A)Quality Standard ISO 9001

Additional Models

TR24-SR US TR24-SR-T US with 3 ft plenum rated cable



©


Service chilled or hot water, 60% glycolFlow characteristic A port equal percentage

B port modified linear for constant AB flow

Action Max 95° rotationSizes 1/2”, 3/4”Type of end fitting female, NPTMaterials:

Body forged brass, nickel platedBall stainless steelStem stainless steelSeats fiberglass reinforced teflon® PTFECharacterizing disc TEFZEL®

Packing 2 EPDM O-rings, lubricatedPressure rating 600 psi Media temp. range 0°F to 212°F [-18°C to 100°C]Close off pressure 200 psiMaximum differential: For Characterized A-port pressure (∆P) 20 psi for typical applications

30 psi max for quiet service

For full flow versions only (no A-disc) On/Off control 150 psi

Leakage A port: 0%B port: 0.5% - 2% of full rated CVAB port: 0%

Cv rating A port: see product chart for valuesB port: 70% of A port flow

Tefzel® is a registered trademark of DuPont

See Selection Chart Pg 15 for Control Valve No., Cv and Close-off

Application

This valve is typically used in air handling units on heating orcooling coils, and fan coil unit heating or cooling coils. Someother common applications include Unit Ventilators, VAV Boxreheat coils and bypass loops. This valve is suitable for use ina hydronic system with variable or constant flow. This valve isdesigned for modulating control using 2...10VDC or 4...20mA.(for 4...20mA control input a 500 ohm resistor is required).

The valve is designed to fit in compact areas where propor-tional control is required using 24 VAC/VDC.

vicengineer5004

Right



Submitted To:



Submittal Details:

Date Submitted: 3/30/2006 Date Resubmitted: Specification Section: 15900.2.7&2.8 Description: 12mm 2-way 2 pos'n spring return zone valve Model: ZONE215N-35

Supplier info:




®

8

H205

18-0

3/05

- Su

bjec

t to

chan

ge. ©

Bel

imo

Airc

ontro

ls (U

SA),

Inc.

†Three-way valve can be NC or NO depending on installation always using the NC actuator. See technical literature for details.

Electronic Zone Valves, Spring Return ActuatorTwo-way and Three-way valves with NPT or sweat ends

Valve Actuator

Nominal Close- 24 V 24 V 120 V 120 VModel # Cv Size off Normally Closed Normally Open Normally Closed Normally OpenValve Rating Inches mm (psi) ZONE24NC ZONE24NO ZONE120NC ZONE120NO

Two-way with NPT Female Connection

ZONE215N-10 1.0 1/2” 15 75 Pg 10 Pg 10 Pg 10 Pg 10

ZONE215N-25 2.5 1/2” 15 50 Pg 10 Pg 10 Pg 10 Pg 10

ZONE215N-35 3.5 1/2” 15 30 Pg 10 Pg 10 Pg 10 Pg 10

ZONE220N-35 3.5 3/4” 20 30 Pg 10 Pg 10 Pg 10 Pg 10

ZONE220N-50 5.0 3/4” 20 25 Pg 10 Pg 10 Pg 10 Pg 10

ZONE225N-80 8.0 1” 35 20 Pg 10 Pg 10 Pg 10 Pg 10

Three-way with NPT Female Connection

ZONE315N-10 1.0 1/2” 15 75 Pg 10 † Pg 10 †

ZONE315N-25 2.5 1/2” 15 50 Pg 10 † Pg 10 †

ZONE315N-35 3.5 1/2” 15 30 Pg 10 † Pg 10 †

ZONE320N-35 3.5 3/4” 20 30 Pg 10 † Pg 10 †

ZONE320N-50 5.0 3/4” 20 25 Pg 10 † Pg 10 †

ZONE325N-80 8.0 1” 35 20 Pg 10 † Pg 10 †

Two-way with Sweat Connection

ZONE215S-10 1.0 1/2” 15 75 Pg 10 Pg 10 Pg 10 Pg 10

ZONE215S-25 2.5 1/2” 15 50 Pg 10 Pg 10 Pg 10 Pg 10

ZONE215S-35 3.5 1/2” 15 30 Pg 10 Pg 10 Pg 10 Pg 10

ZONE220S-35 3.5 3/4” 20 30 Pg 10 Pg 10 Pg 10 Pg 10

ZONE220S-50 5.0 3/4” 20 25 Pg 10 Pg 10 Pg 10 Pg 10

ZONE225S-80 8.0 1” 35 20 Pg 10 Pg 10 Pg 10 Pg 10

Three-way with Sweat Connection

ZONE315S-10 1.0 1/2” 15 75 Pg 10 † Pg 10 †

ZONE315S-25 2.5 1/2” 15 50 Pg 10 † Pg 10 †

ZONE315S-35 3.5 1/2” 15 30 Pg 10 † Pg 10 †

ZONE320S-35 3.5 3/4” 20 30 Pg 10 † Pg 10 †

ZONE320S-50 5.0 3/4” 20 25 Pg 10 † Pg 10 †

ZONE325S-80 8.0 1” 35 20 Pg 10 † Pg 10 †

Built-in auxiliary switch ZONE215N-10+ZONE24NC-S Pg 10 Pg 10 Pg 10 Pg 10

(add -S to model number)

ZONE

24NC

ZONE

24NO

ZONE

120N

C

ZONE

24NC

ZONE

120N

C

ZONE

24NC

ZONE

120N

C

ZONE

120N

O

ZONE

24NC

ZONE

24NO

ZONE

120N

C

ZONE

120N

O

vicengineer5004

Right

vicengineer5004

Right

®

10

H205

18-0

3/05

- Su

bjec

t to

chan

ge. ©

Bel

imo

Airc

ontro

ls (U

SA),

Inc.

Electronic Zone ValvesZONE… SeriesTechnical Data/Submittal


Service chilled or hot water, 50% glycolFlow characteristic Two-way on/off Three-way on/off, divertingSizes 1/2”, 3/4” and 1”Type of end fitting female, NPT or SweatMaterials:

Body forged brassStem stainless steelSeals EPDM

Pressure rating 300 psi Media temp. range 32°F to 212°F [0°C to 100°C]Close off pressure 20 – 75 psiLeakage Class III 0.1%Cv rating 1.0 – 8.0

U.S. & Foreign Patent Pending


Control On/offNominal voltage 24 VAC 50/60 Hz ± 10%

or 120 VAC 50/60 Hz ± 10%Power Consumption 6.5 WTransformer Sizing 7VA (Class 2 power source)Electrical Connection Wire lead length, 120V 6”

24V 18”Position Indication Integrated into lever (NC only)Running Time Motor: 20-40 seconds

Spring: 5 secondsHumidity 5 to 95% non-condensingAmbient Temperature 32°F to 104°F (0°C to + 40°C)Storage Temperature -40°F to 176°F (-40°C to +80°C)Housing Rating UL94-5V(B)Agency Listing CE, cULus Noise Level max. 35 db (A)Quality Standard ISO 9001Built-in Auxiliary Switch 1 x SPDT, 5A resistive (5A inductive)(optional) @ 24 VAC

1 x SPDT, 5A resistive (5A inductive)@ 120 VAC

Application

This valve is typically used on fan coil units, baseboards orother hydronic applications where fail safe operation or 2-wirecontrol is required. This valve is suitable for use in a hydronicsystem with variable or constant flow.

This valve is designed to fit in compact areas where on/off orcontrol is required using 24 VAC or 120 VAC.

®

9

H205

18-0

3/05

- Su

bjec

t to

chan

ge. ©

Bel

imo

Airc

ontro

ls (U

SA),

Inc.

Electronic Zone ValvesInstallation

3-way installed on the return

(NO) B

AB

A

B A

LoadAB

AB Load

A

A B

Load

InstallationThe valve can be installed vertically or horizontally, but not turned upside down.

– A 3-way valve cannot be transformed into a 2-way valve andvisa versa.

– The flow is from A to B (see diagram below) and must beinstalled so the paddle closes against the direction of flowas indicated in the following diagrams.

– The 2-way valves can be installed on the supply or on thereturn; for correct installation it is necessary to respect thedirection of flow indicated from the arrow on the body valve.

360°

2-way valve normally closed actuator

3-way valve normally closed actuator(Note: 3-way uses only normally closed actuator)

3-way installed on the supply in diverting configuration

2-way installed on the supply

2-way installed on the return

(NC)

B A Load

AB

2-way 3-way

Port “A” closedN.C. without power Port”A” closed Port “B” open

Port “AB” open

N.C. open with power Port”A” open Port “A” openPort “B” closedPort “AB” open

N.C. manually open Port”A” open Port “A” openPort “B” open

Port “AB” open

B



Submitted To:



Submittal Details:

Date Submitted: 3/30/2006 Date Resubmitted: Specification Section: 15900.2.2.1 Description: Room temperature sensor Model: TE200AD7

Supplier info:

Name: Pacific Controls Ltd. Address: 440 Garbally Road, Victoria, BC V8T 2S9

Manufacturer info: Name: Greystone Energy Systems Inc. Address: 150 English Drive, Moncton, NB E1E 4G7 Website www.greystoneenergy.com


FEATURES: The TE Series Space Temperature sensors are available in four different enclosure styles. They are available with a choice of precision RTD’s, IC’s, or thermistors. A number of options, such as momentary override and setpoint adjustment are also available for various configurations. A transmitter option is also available to be used with the 1000 ohm platinum sensor which provides either 4 -20mA, 0 – 5 VDC or 0 – 10 VDC output proportional to a selected temperature span. A 100 ohm platinum sensor transmitter is optional. The transmitters provide high accuracy, long-term

stability, low hysteresis, fast response and a wide operating temperature range. Every transmitter offers accuracy of 0.1% of span or better and are highly stable due to excellent RFI rejection and are also virtually immune to power supply noise and input voltage fluctuations. Transmitter General Specifications: Supply Voltage: 24 VDC/VAC Output: 4 – 20mA, 0–5 VDC or 0-10 VDC Accuracy: ±0.1% of span Operating temp: 0°C – 70°C (32°F – 158°F) Calibration In compliance with ANSI/NCSL 2540-11994

AS) Surface - A stainless steel plate which can be mounted to a wall box used where tamper-proof or protection is required. Available with various options, including push button overrides, etc.

SPACE/WALL MOUNT TRANSMITTER:

A) Micro – Includes a compact snap-mounted cover for ease of installation, available with various temperature sensors.

AD) Designer – Features include a three-piece enclosure that mounts directly to a wall box or on any wall. Available with various options. Including set point adjustments, push button overrides, etc.

Display Type LCD Display LED Display

Power Supply 12 – 30 VAC/DC at 2mA max 12 – 30 VAC/DC at 30mA max

Display Units °C or °F (factory set) °C or °F (jumper selectable)

Display Range 0.0 – 35.0°C (32.0 – 95.0°F) 10.0 – 35.5°C (50.0 – 96.0°F)

Display Resolution 0.1°C (0.1°F) 0.5°C (1.0°F)

Display Size 23 mm W x 11 mm H (0.9” W x 0.45” H) 3 digit x 30 mm W x 7.6 mm H (1.18” W x 0.3” H)

Available Options Various sensors, set points, push buttons, external jacks, and logos.

GREYSTONE ENERGY SYSTEMS INC. Q M I

ISO 9002

vicengineer5004

Right

MODEL Product Description

TE200 TE500

Sensor assembly Sensor assembly c/w transmitter (sensor type 12 is standard)

CODE Enclosure

A AD AS

Micro (not available with transmitter or options) Designer S/S plate

CODE Sensor

2 5 6 7 8 9 11 12 13 14 20 21 24

PT100-100 ohm Platinum, IEC 751, 385 Alpha, thin film 1801 ohm, NTC Thermistor, ±0.2°C 3,000 ohm, NTC Thermistor, ±0.2°C 10,000 ohm, type 3, NTC Thermistor, ±0.2°C 2.252 K ohm NTC Thermistor, ±0.2°C 100,000 ohm, NTC Thermistor, ±0.2°C LM334 IC, 1.0uA/°C PT1000-1000 ohm Platinum, IEC 751, 0.385 Alpha, thin film 1000 ohm nickel 10,000 ohm type 3, NTC Thermistor, ±0.2°C c/w 11k shunt resistor 20,000 ohm, NTC Thermistor, ±0.2°C LM335 IC, 10mv/°C 10,000 ohm, type 2, NTC Thermistor, ±0.2°C

CODE Options (TE200AD assembly only) AP

AS BS AM BC BF AC AF LY LR LG CJ AE AI

20-30K linear slide pot for set point control Concealed push button momentary switch (NO) Exposed push button momentary switch (NO) Alcohol thermometer °C & °F Bi-metal thermometer °C Bi-metal thermometer °F 3-digit LCD temperature indicator °C 3-digit LCD temperature indicator °F Yellow LED Red LED Green LED External jack for remote system access (phono jack) External jack for remote system access (4-pin header) Internal jack (RJ-45)

CODE TE500 Transmitter Power Supply 1 24 VAC/DC CODE TE500 Transmitter Output Option

A D E

Current 4 – 20mA Voltage 0 – 5 VDC Voltage 0 – 10 VDC

CODE TE500 Transmitter Range Option

1 2

0°C – 35°C (32°F – 95°F) 0°C – 50°C (32°F – 122°F)

TE500 AD 12 - 1 A 2

Greystone Energy Systems, Inc. reserves the right to make design modifications without prior notice.

SPACE TEMPERATURE SENSORS/TRANSMITTERS: PRODUCT ORDERING INFORMATION

EXAMPLE: Designer space, c/w PT1000Ω RTD, 4–20mA transmitter with a 0°C – 50°C (32°F – 122°F) range.

NOTE: Due to the many possible configurations, special part numbers may be required, please contact Greystone for more information.


ISO 9002

vicengineer5004

Right

vicengineer5004

Right

vicengineer5004

Right



Submitted To:



Submittal Details:

Date Submitted: 3/30/2006 Date Resubmitted: Specification Section: 15900.2.3 Description: Room temperature sensor c/w two button adjust Model: RT

Supplier info:

Name: Reliable Controls Corporation Address: 207-3375 Whittier Avenue, Victoria, BC V8Z 3R11

Manufacturer info: Name: Reliable Controls Corporation Address: 207-3375 Whittier Avenue, Victoria, BC V8Z 3R11 Website www.reliable-controls.com




Submitted To:



Submittal Details:

Date Submitted: 3/30/2006 Date Resubmitted: Specification Section: 15900.2.2.2 Description: Room temperature sensor S/S plate Model: TE200AS7

Supplier info:


















ISO 9002

vicengineer5004

Right


TE200 TE500


CODE Enclosure

A AD AS


CODE Sensor

2 5 6 7 8 9 11 12 13 14 20 21 24






A D E



1 2

0°C – 35°C (32°F – 95°F) 0°C – 50°C (32°F – 122°F)

TE500 AD 12 - 1 A 2






ISO 9002

vicengineer5004

Right

vicengineer5004

Right

vicengineer5004

Right



Submitted To:



Submittal Details:

Date Submitted: 3/30/2006 Date Resubmitted: Specification Section: 15900.2.2.1 Description: Room temperature sensor with pushbutton override Model: TE200AD7BS

Supplier info:


















ISO 9002

vicengineer5004

Right


TE200 TE500


CODE Enclosure

A AD AS


CODE Sensor

2 5 6 7 8 9 11 12 13 14 20 21 24






A D E



1 2

0°C – 35°C (32°F – 95°F) 0°C – 50°C (32°F – 122°F)

TE500 AD 12 - 1 A 2






ISO 9002

vicengineer5004

Right

vicengineer5004

Right

vicengineer5004

Right

vicengineer5004

Right



Submitted To:



Submittal Details:

Date Submitted: 3/30/2006 Date Resubmitted: Specification Section: 15900.2.4.3 Description: Duct temperature sensor Model: TE200B7D2

Supplier info:




FEATURES:

The TE Series Temperature sensors offer a choice of precision platinum RTD’s, IC, or NTC thermistor sensors which can be interfaced with a computerized monitoring or control system. The sensors are available in different housings, with various configurations and options for duct, immersion, duct averaging, remote strap-on and outside air applications. The single point sensors are encapsulated in a 6.35 mm (0.25”) OD 304 stainless steel probe. All probes are constructed to provide good heat transfer and fast response. The averaging sensors are available in both plenum rated cable or with a copper probe.

The TE500 transmitter option is standard with the 1000Ω platinum sensor and provides either 4 – 20mA, 0 – 5 VDC or 0 – 10 VDC output over a selected range. It is powered by either 24 VAC or VDC. A 100Ω platinum sensor transmitter is optional. Transmitter General Specifications: Supply Voltage: 24 VDC/VAC Output: 4–20mA, 0–5 VDC or 0-10 VDC Accuracy: ±0.1% of span Operating temp: 0ºC – 70ºC (32ºF – 158ºF) OSA operating temp: -40°C – 85°C (-40°F – 185°F) Calibration: In compliance with ANSI/NCSL 2540-11994

E) Strap-on Sensor – Is a stainless steel probe and is used in remote applications where an immersion sensor can not be installed.

F) OSA Sensor – Comes in an aluminum LB c/w ½” NPT fitting for connection to conduit. It incorporates a sun/wind shield to protect the sensor

B) Duct Sensor – For single point monitoring. It is available with various probe lengths and enclosures to fit any application.

C) Immersion Sensor – Comes in two configurations. It has either spring loaded or non-spring loaded probes and has a ½” NPT fitting to be mounted into a thermowell. It is available in various lengths and enclosures styles.

TRANSMITTER:

PROBE SENSORS


ISO 9002

FD) Flex-Duct Sensor – Is made of flexible plenum rated cable which incorporates numerous sensors along the assembly. It acts as a single sensor averaging any temperature change across the sensors.

D) Duct Average Sensor – Incorporates numerous sensors inside a copper tube. It acts as a single sensor, averaging any temperature change across the sensors.

NOTE: Standard probe assemblies are rated at -40°C – 105°C (-40°F - 221°F). For higher or lower temperature applications, please contact Greystone.

vicengineer5004

Right


TE200 TE500


CODE Style

AP B

BB C D E F

FD G H

HC

All purpose Duct mount Duct probe w/ mounting bracket only Immersion Duct average (copper) Strap-on Outside Air Duct average (flexible plenum rated cable) Glass Stack Clip

CODE Enclosure (GES ABS enclosure is standard) CODE Flex Duct Only

- M R W

ABS enclosure, standard (no code required, leave blank) Metal utility box No box Aluminum weatherproof box

A B C D

CODE Sensor

2 4 5 6 7 8 9

11 12 13 20 21 24

PT100-100Ω Platinum,IEC 751, 385 Alpha, thin film PT100–100Ω Platinum, IEC 751, 385 Alpha, wire wound-ceramic* (see below) 1801Ω, NTC Thermistor, ±0.2°C 3000Ω, NTC Thermistor, ±0.2°C 10,000Ω, type 3, NTC Thermistor, ±0.2°C 2.252KΩ, NTC Thermistor, ±0.2°C 100,000Ω, NTC Thermistor, ±0.2°C LM334 IC, 1.0uA/°C PT1000Ω Platinum, IEC 751, 385 Alpha, thin film 1000Ω Nickel 20,000Ω, NTC Thermsitor, ±0.2°C LM335 IC, 10mv/°C 10,000Ω, type 2, NTC Thermistor, ±0.2°C *must use for high temp. applications over 400°C (752°F)

CODE Probe Length CODE Copper Avg. (D) CODE Flex Avg. (FD)

A B C D E F

50 mm (2”) 100 mm (4”) 150 mm (6”) 200 mm (8”) 300 mm (12”) 450 mm (18”)

G H I J

1800 mm (6’) 3600 mm (12’) 6100 mm (20’) 7300 mm (24’)

A B C D

1800 mm (6’) 3600 mm (12’) 6100 mm (20’) 7300 mm (24’)

CODE Probe Material (not required for F, FD, G, HC)

2 3

Stainless steel Copper (rigid duct average only)

CODE Fitting (only required for immersion)

A E

Spring loaded 1/2” NPT Non-spring loaded 1/2” NPT

CODE TE500 Transmitter Power Supply

1 24 VAC/VDC

CODE TE500 Transmitter Output Option

A D E

4 – 20mA 0 – 5 VDC 0 – 10 VDC


1 2 3 4 5 6

0°C – 35°C (32°F – 95°F) 0°C – 50°C (32°F – 122°F) 0°C – 100°C (32°F – 212°F) 50°C – 150°C (122°F – 302°F) 50°C – 250°C (122°F – 482°F) -50°C – +50°C (-58°F – 122°F)

Custom ranges available upon request.

TE200 D - 7 I 3 - - - -


Lead only, no box ABS enclosure Aluminum weatherpoof box Metal utility box

PROBE TEMPERATURE SENSORS/TRANSDUCERS: PRODUCT ORDERING INFORMATION


ISO 9002

vicengineer5004

Right

vicengineer5004

Right

vicengineer5004

Right

vicengineer5004

Right

vicengineer5004

Right



Submitted To:



Submittal Details:

Date Submitted: 3/30/2006 Date Resubmitted: Specification Section: 15900.2.4.5 Description: 4" immersion temperature sensor Model: TE200C7B2E

Supplier info:




FEATURES:







TRANSMITTER:

PROBE SENSORS


ISO 9002




vicengineer5004

Right


TE200 TE500


CODE Style

AP B

BB C D E F

FD G H

HC



- M R W


A B C D

CODE Sensor

2 4 5 6 7 8 9

11 12 13 20 21 24



A B C D E F

50 mm (2”) 100 mm (4”) 150 mm (6”) 200 mm (8”) 300 mm (12”) 450 mm (18”)

G H I J

1800 mm (6’) 3600 mm (12’) 6100 mm (20’) 7300 mm (24’)

A B C D

1800 mm (6’) 3600 mm (12’) 6100 mm (20’) 7300 mm (24’)


2 3



A E



1 24 VAC/VDC


A D E

4 – 20mA 0 – 5 VDC 0 – 10 VDC


1 2 3 4 5 6



TE200 D - 7 I 3 - - - -





ISO 9002

vicengineer5004

Right

vicengineer5004

Right

vicengineer5004

Right

vicengineer5004

Right

vicengineer5004

Right

vicengineer5004

Right



Submitted To:



Submittal Details:

Date Submitted: 3/30/2006 Date Resubmitted: Specification Section: 15900.2.4.5 Description: 4" Brass thermowell Model: T1-1/2BR4

Supplier info:




OPTIONS: Immersion Wells

ASSEMBLIES: ENCLOSURES:

G) Glass

W) Aluminum Weatherproof Box

AP) All Purpose

BB) Duct probe c/w mounting bracket

GES ABS Enclosure

H) Stack

M) Stamped Metal Utility Box

Greystone Energy Systems Inc., established in 1983, is Canada’s largest manufacturer of HVAC sensors and

transducers for Building Automation Management Systems. We have conscientiously established a worldwide reputation

as an industry leader by maintaining leading-edge design technology, prompt technical support, and a commitment to

on-time deliveries. We take pride in our Quality Management System which is ISO 9002 certified, assuring

our customers of consistent product reliability.

GREYSTONE IS AN ISO 9002 REGISTERED COMPANY

Greystone Energy Systems Inc. 150 English Drive, Moncton, NB Canada E1E 4G7 (506) 853-3057 Fax: (506) 853-6014 e-mail: [email protected] www.greystoneenergy.com

Q M I

ISO 9002

vicengineer5004

Right

vicengineer5004

Right

vicengineer5004

Left



Submitted To:



Submittal Details:

Date Submitted: 3/30/2006 Date Resubmitted: Specification Section: 15900.2.4.2 Description: Outdoor air temperature sensor Model: TE200F7

Supplier info:




FEATURES:







TRANSMITTER:

PROBE SENSORS


ISO 9002




vicengineer5004

Right


TE200 TE500


CODE Style

AP B

BB C D E F

FD G H

HC



- M R W


A B C D

CODE Sensor

2 4 5 6 7 8 9

11 12 13 20 21 24



A B C D E F

50 mm (2”) 100 mm (4”) 150 mm (6”) 200 mm (8”) 300 mm (12”) 450 mm (18”)

G H I J

1800 mm (6’) 3600 mm (12’) 6100 mm (20’) 7300 mm (24’)

A B C D

1800 mm (6’) 3600 mm (12’) 6100 mm (20’) 7300 mm (24’)


2 3



A E



1 24 VAC/VDC


A D E

4 – 20mA 0 – 5 VDC 0 – 10 VDC


1 2 3 4 5 6



TE200 D - 7 I 3 - - - -





ISO 9002

vicengineer5004

Right

vicengineer5004

Right

vicengineer5004

Right



Submitted To:



Submittal Details:

Date Submitted: 3/30/2006 Date Resubmitted: Specification Section: 15900.2.4.4 Description: Average duct temperature sensor 20' Model: TE200FDB7C

Supplier info:




FEATURES:







TRANSMITTER:

PROBE SENSORS


ISO 9002




vicengineer5004

Right


TE200 TE500


CODE Style

AP B

BB C D E F

FD G H

HC



- M R W


A B C D

CODE Sensor

2 4 5 6 7 8 9

11 12 13 20 21 24



A B C D E F

50 mm (2”) 100 mm (4”) 150 mm (6”) 200 mm (8”) 300 mm (12”) 450 mm (18”)

G H I J

1800 mm (6’) 3600 mm (12’) 6100 mm (20’) 7300 mm (24’)

A B C D

1800 mm (6’) 3600 mm (12’) 6100 mm (20’) 7300 mm (24’)


2 3



A E



1 24 VAC/VDC


A D E

4 – 20mA 0 – 5 VDC 0 – 10 VDC


1 2 3 4 5 6



TE200 D - 7 I 3 - - - -





ISO 9002

vicengineer5004

Right

vicengineer5004

Right

vicengineer5004

Right

vicengineer5004

Right

vicengineer5004

Right



Submitted To:



Submittal Details:

Date Submitted: 3/30/2006 Date Resubmitted: Specification Section: 15900.2.9 Description: CO2 detector Duct Mounted Model: CCD1A6000

Supplier info:




Environmental, industrial and commercial indoor Carbon Dioxide (CO2) gas detector. Available in both a space and duct mount version.

APPLICATION: To sense and transmit to any compatible electronic analog control, DDC/PLC controller or automation system for the control of ventilation equipment. Designed to meet ventilation requirements specified in ASHRAE Standard 62-1989. FEATURES:

• Setup/calibration fully menu driven (requires LCD option)

• Monitors CO2 over range 0-2000 PPM (factory default)

• Field adjustable range from 0-1500 PPM up to 10,000 PPM without re-calibration!

• NDIR single beam with patented ACLP self- calibration algorithm

• Guaranteed 5 year calibration interval • Optional on board relay with field adjustable trip

point • Optional LCD for displaying PPM level and menu

options • Powered by either AC or DC source with no

change to circuit required • Choice of two field adjustable analog output

signals, linearized over full range • Easy to calibrate in the field

CO2 DETECTOR

SPECIFICATIONS CO2 DETECTOR – Product # CDD

Gas Detected Carbon Dioxide (CO2)

Range 0 – 2000 ppm standard, programmable from 1500 up to 10,000 ppm in 500 ppm increments

Standard Accuracy ±75 PPM or3% of reading (whichever is greater) 15-32 C (59-90 F) for 0-2000 ppm range ±5% of reading for 2000-10,000 ppm

Extended Accuracy ±150 ppm or 5% of reading (whichever is greater) 0-50 C (32-122 F) for 0-2000 ppm range ±7% of reading for 2000-10,000 ppm

Sensing Element Non-Dispersive Infrared (NDIR)

Operation Conditions 0-50C(32-122F), 0-95% RH non-condensing

Repeatability ±20 PPM

Stability ±20 PPM typical, 5 year calibration interval

Manufacturing Process ISO 9002 certified

Output Signal 4-20 mA active (sourcing), 0-5Vdc and 0-10Vdc, jumper selectable (Note correct part number)

Output Drive Capability 550 ohm max for current output, 10 Kohm min for voltage output

Output Resolution 10 bit PWM

LCD Display (optional) LCD for displaying PPM level (required for field programming) 1 ppm resolution, 1.1” w x 0.5” h (28 x 13 mm) alpha-numeric 2 line x 8 characters

Field Calibration Calibration, applying calibration gas standards (Contact Greystone for Calibration kit)

External Dimensions Corporate Space – 91mm W x 127mm H x 43 mm D (3.6” x 5” x 1.7”) Duct ABS – 124 mm W x 183 mm H x 43 mm D (4.9” x 7.22” x 1.69”)


ISO 9002

Duct Mount ABS Enclosure with Sampling Tube

vicengineer5004

Right


ISO 9002

SPECIFICATIONS (Con’t) CO2 DETECTOR – Product # CDD

Pressure Dependence 0.13% of reading per mm Hg

Altitude Correction Programmable from 0-5000 ft in 500 ft increments

Response Time < 60 seconds for 90% step change

Warm-up Time < two (2) minutes

Power Supply 20-30 Vac/dc (non-isolated half-wave rectified)

Consumption 80 mA max @ 24 Vdc, 36 mA avg @24 Vdc

Input Voltage Effect Negligible over specified operating range

Protection Circuitry Reverse voltage protected and output limited

Optional Relay Output One Form C contact (N.O. and N.C.), status LED, 5 amps @ 250 Vac, 5 amps @ 30Vdc, p.f. = 1 Relay Trip Point – Programmable 500-1500 ppm in 50 ppm increments Relay Hysteresis – Programmable 25-200 ppm in 25 ppm increments

Programming and Selection Via internal push-buttons and jumper

Wiring Connections Screw terminal block (14 to 22 AWG)

MODEL Description

CDD Carbon Dioxide Detector (CO2)

CODE

1 Non-Dispersive Infrared (NDIR)

CODE Gas Type Range

A

CO2 – Carbon Dioxide Detector (CDD)

0-2000 PPM Standard User programmable up to 10,000 PPM

CODE Enclosure and Outputs

1 2 6

Corporate Space c/w 4-20 mA and 0-5 Vdc outputs Corporate Space c/w 4-20 mA and 0-10 Vdc outputs Duct ABS c/w Sampling Tube, 4-20 mA, 0-5 Vdc and 0-10 Vdc outputs

CODE Circuit Board Relay

00 10

No Relay One Relay (DPDT, N.O. or N.C., 5A @ 24 VDC)

CODE Options

0 1 2

No options LCD RS-485 Communication (Please contact Greystone)

CDD 1 A 1 00 0 Typical Model Number

Example: NDIR CO2 Corporate No Relay No Options


Sensing Element

CARBON DIOXIDE (CO2): PRODUCT ORDERING INFORMATION

vicengineer5004

Right

vicengineer5004

Right

vicengineer5004

Right

vicengineer5004

Right

vicengineer5004

Right

Greystone Energy Systems Inc., established in 1983, is Canada’s largest manufacturer of HVAC sensors and

transducers for Building Automation Management Systems. We have conscientiously established a worldwide

reputation as an industry leader by maintaining leading- edge design technology, prompt technical support, and

a commitment to on-time deliveries. We take pride in our Quality Management System which is ISO 9002 certified,

assuring our customers of consistent product reliability.

Q M I

ISO 9002



DIMENSIONS nts

ACLP SOFTWARE AND 5 YEAR CALIBRATION GUARANTEE ACLP SOFTWARE ACLP (Automatic Calibration Logic Program) software utilizes the computing power in the sensor’s on-board micro-processor to remember the lowest CO2 concentration that takes place every 24 hours. The sensor assumes this low point is at outside levels. The sensor is also smart enough to discount periodic elevated readings that might occur if for example a space was used 24 hours per day over a few days. Once the sensor has collected 14 days worth of low concentration points it performs a statistical analysis to see if there has been any small changes in the sensor reading over background levels that could be attributable to sensor drift. If the analysis concludes there is drift, a small correc-tion factor is made to the sensor calibration to adjust for this change. 5 YEAR CALIBRATION GUARANTEE Based on the results of years of testing of ACLP software, Greystone now offers a 5 year calibration guarantee on all its CDD series wall and duct mount sensors used for CO2 based ventilation control when operated in an environment that can utilize ACLP software. If the sensor is found to be out of calibration more than 150 ppm as compared to a calibration gas or recently calibrated reference, Greystone will provide a free factory calibration of the sensor if re-turned to Greystone. This guarantee only applies if the sensor is operated in an environment where inside levels peri-odically drop to outside concentrations (i.e. during evenings or weekends when there is no occupancy) as is required by ACLP software. If a space does not experience a periodic drop to outside levels (e.g. where occupancy is 24 hours, 7 days/week), ACLP software should be deactivated off. With ACLP deactivated (via menu buttons) calibration may be required every 2 to 3 years.

42.9 mm (1.69”)

124.5 mm (4.90”)

183.4 mm (7.22”)

92.7 mm (3.65”)

127 mm (5.00”)

43.8 mm (1.69”)

vicengineer5004

Right



Submitted To:



Submittal Details:

Date Submitted: 3/30/2006 Date Resubmitted: Specification Section: 15900.2.9 Description: CO2 detector Wall Mounted Model: Ventostat 8001-L

Supplier info:

Name: Tinsmith Mechanical Address:

Manufacturer info: Name: Telaire Address: 6860 Cortona Drive - Suite B, Golete, CA 93117 Website www.telaire.com


!" #$$%&'(((

!")*+,(-(,(%,#-...'

!'

"!#$

"#

%&'(%) *

$$*$

!"

$+" *

, - .

./012*3-

"#-"

!

!!!!

"!$

!"#"$%& '$( ")(*+ %,- %. & /!" # $%/ & #'0*)12.31#$4( ' 53"0 (200-#0 607

80 ,915#:4 );':04<#6)(=%&;5:0 "#:>&% "#:8% & ':0*+ .5*49>?#+ . &@+@0 *%%.> A5:0 *%,- %8. # !;;BC % % %* +,&4' %-0 %,-8" !; -#

; ; ; ;

DE 0+ % & %& D D % & % &

& D %&%0+ 8% D 0+ &0+ D DE 09F %

Light Source

COP87L88GGV-X

E

Gas PermeableMembrane

CO2 MicroprocessorCorrects Drift

Using ABC Logic™

Single ChannelDetector

Signal toMicroprocessor

Sends CO Signalto Equipment

2

!"

#$D: ;; > <: :

%!&DE -

& % 8

-09F * 09 .

D>

C

&% %8 G

<%8& H8 % 0% ,7>

C % & %

98 % &

*:I.

+* .%

01J K

% %= & 6 &

-0 %

+ ; % H8 =*; .

+ &%&

+ * .#

D;6;*80 . -0%,915#: &

.%/ 012<

.%% ! 7 (

7&

.%%. & 7 D

L2*1L0.

$2$ "+20 =

0

$2% - 32-M

0 "&!

024"#

C

'&%!

(

)*D0+ & ;; & D

*;#1)5)11. D &%& & % D & & & D & 09F*80. % ! D &!"#"$*%& . & > &4N5#8 D; 2 & %% D > : <: +,-+,.

: ; -0 ,-" B% 4N5#8 &

> %8& 8

2 7/8"

2 3/8"

5 1/16"

4 1/4"

3 1/4"

2 3/8"

3 1/4"

5 5/8"

1 1/8"

/0"&01(&#((((**1

0"1(&#((((**1

0"&01(&#((((**1

% 7 ",-0O = = 8 8 ,915#:4

&%8& &

4 /. 4 /.0 4 /$ 4 /$0

/0"1(&#((((**1

%)"; 0+ &H =# % & = % ,--

/#0"!D 8 : ;; %# D; & 8D 2 &%&

DE ;;0+

0 56*80. 0 & %0+& & * & . 0 56 %

8 5 && 056%%8 % % 0+ % %

1200

1100

1000

900

800

700

600600 200 400 600

Days

800 1000 1200

CO

PP

MR

ead

ing

Usin

g980

PP

MC

alib

rati

on

Gas

2

!"

#$D: ;; > <: :

%!&DE -

& % 8

-09F * 09 .

D>

C

&% %8 G

<%8& H8 % 0% ,7>

C % & %

98 % &

*:I.

+* .%

01J K

% %= & 6 &

-0 %

+ ; % H8 =*; .

+ &%&

+ * .#

D;6;*80 . -0%,915#: &

.%/ 012<

.%% ! 7 (

7&

.%%. & 7 D

L2*1L0.

$2$ "+20 =

0

$2% - 32-M

0 "&!

024"#

C

'&%!

(

)*D0+ & ;; & D

*;#1)5)11. D &%& & % D & & & D & 09F*80. % ! D &!"#"$*%& . & > &4N5#8 D; 2 & %% D > : <: +,-+,.

: ; -0 ,-" B% 4N5#8 &

> %8& 8

2 7/8"

2 3/8"

5 1/16"

4 1/4"

3 1/4"

2 3/8"

3 1/4"

5 5/8"

1 1/8"

/0"&01(&#((((**1

0"1(&#((((**1

0"&01(&#((((**1

% 7 ",-0O = = 8 8 ,915#:4

&%8& &

4 /. 4 /.0 4 /$ 4 /$0

/0"1(&#((((**1

%)"; 0+ &H =# % & = % ,--

/#0"!D 8 : ;; %# D; & 8D 2 &%&

DE ;;0+

0 56*80. 0 & %0+& & * & . 0 56 %

8 5 && 056%%8 % % 0+ % %

1200

1100

1000

900

800

700

600600 200 400 600

Days

800 1000 1200

CO

PP

MR

ead

ing

Usin

g980

PP

MC

alib

rati

on

Gas

2

vicengineer5004

Right

!" #$$%&'(((

!")*+,(-(,(%,#-...'

!'

"!#$

"#

%&'(%) *

$$*$

!"

$+" *

, - .

./012*3-

"#-"

!

!!!!

"!$

!"#"$%& '$( ")(*+ %,- %. & /!" # $%/ & #'0*)12.31#$4( ' 53"0 (200-#0 60780 ,915#:4

);':04<#6)(=%&;5:0 "#:>&% "#:8% & ':0*+ .5*49>?#+ . &@+@0 *%%.> A5:0 *%,- %8. # !;;BC % % %* +,&4' %-0 %,-8" !; -#

; ; ; ;

DE 0+ % & %& D D % & % &

& D %&%0+ 8% D 0+ &0+ D DE 09F %

Light Source

COP87L88GGV-X

E

Gas PermeableMembrane

CO2 MicroprocessorCorrects Drift

Using ABC Logic™

Single ChannelDetector

Signal toMicroprocessor

Sends CO Signalto Equipment

2



Submitted To:



Submittal Details:

Date Submitted: 3/30/2006 Date Resubmitted: Specification Section: 15900.1.1.4 Description: Web Access Software Model: RC Webview

Supplier info:




The Reliable Controls®

environments

control building

access, monitor, and

economical solution to

simple, flexible, and

operators yet another

software gives building

RC-WebView™ Web

based system access

Reliable Controls® MACH-System server based Web access

Distributed system access and manipulation through IE 5.5 or higher

Real-time, dynamic display of System Group screens

Configuration utility for ease-of-setup

Unlimited number of simultaneous user connections

Password protection for system integrity

The Reliable Controls® RC-WebView™ Web server software is part of the software suite for the Reliable Controls® MACH-System.

© 2003 Reliable Controls CorporationReliable Controls® Corporation, 207-3375 Whittier Ave., Victoria BC, V8Z 3R1

Toll Free: 1 (877) 475-9301 Tel: (250) 475-2036 Fax: (250) 475-2096

RCW-09/03 © 2003 Reliable Controls® Corporation Designed and Manufactured in Canada

F E A T U R E SEasy Setup• Configuration utility provides

easy setup • Password security protection• Tree view feature provides

intuitive navigation• Mulltiple systems supported

Easy Operator Use• Dynamic system data displayed

in intuitive graphical screens• Right click access to edit and

manually override points• Single click access to view and

adjust weekly schedules, annual schedules, trend and runtime logs, and current system alarms

• Custom functionality achieved through the inclusion of system keywords

Dynamic Data• Data synchronization between

RC-WebView™ and the systems connected to RC-Studio®

• Automatic translation of graphics. No need to perform custom exports

Easy Connectivity• Use any copy of Microsoft

Internet Explorer 5.5 or higher to display Web sites created in RC-WebView™

• Unlimited number of users can access site simultaneously

O R D E R I N GRC-WEB-SRV• RC-WebView™ Server

configured with single system license of RC-WebView™ Software

RC-WEB-A• RC-WebView™ Software -

additional system license

PC Requirements• Intel Pentium IV 1.8 Ghz

Processor• Gigabyte GA-8INXP Server

Motherboard• 2 x Maxtor 40.0 GB, 7,200 RPM

ATA/133 Hard Drive• 1.44 MB Floppy Drive, LG 52x

CDROM Drive

• 2 x 256 MB DDR RAM• Nvidia GeForce Video Card• Windows 2000 Server License,

IIS Service• 19” 4U Rackmount Chassis,

300W Power Supply• Keyboard• Logitech Wheel Mouse

RC-WebView™ SoftwareRc-WebView™ enhances the Reliable Controls® suite of building automation software by providing a Web-based access solution that uses Microsoft Internet Explorer 5.5 in place of client side software. RC-WebView™ resides on a dedicated server connected anywhere in the World Wide Web. The software configuration is easy and the number of users connected to RC-WebView™ is only limited by the capability of the server hosting the application.

RC-WebView™ is designed to user the same file structure as RC-Studio®, enabling the two applications to present system group data in the same manner. A common file structure allows the two applications to dynamically synchronize data so that the display is the same in either application.RC-WebView™ allows the operator to user a browser to view and manually override points, adjust weekly schedules and annual schedules, view graph and print trend and runtime logs, and view and print current alarms.

Configuration Utility

System In Browser

Trend Log in Browser

AdministrationWeb Site

RC-WebView™

Web Site # 01

RC-WebView™ SERVER

RC-WebView™

Web Site # xx

INTERNET Ethernet Hub

Router/Firewall

Operator Workstation Off-Site

School

Hospital

Office Tower

Operator Workstation

Router/Firewall

Current Alarms

WAN Network Architecture



Submitted To:



Submittal Details:

Date Submitted: 3/30/2006 Date Resubmitted: Specification Section: 15900.2.13 Description: Building Controller Model: Mach Global (MG)

Supplier info:





environments

control building





controller gives

MACH-Global™ building

Ultimate, intelligent, networkable complete building controller

Completely programmable DDC controller

Modular Input, Output cards provide up to 128 points of measurement

Trend logs with historical tracking

Ideal for high-point applications requiring unrestricted programming

Support provided for two subnetworks

Multiple, simultaneous communication channels

The Reliable Controls® MACH-Global™ building controller is a super solution to any new or replacement equipment application, and ships with the Reliable Controls®industry best 5 year warranty.


Toll Free: 1 (877) 475-9301 Tel: (250) 475-2036 Fax: (250) 475-2096

Dimensions:31.4 cm L x 19.9 cm W x 3.8 cm H

(12.4” L x 7.9” W x 1.25” H)

MG-11/04-RAR © 2003 Reliable Controls® Corporation Designed and Manufactured in Canada

The Reliable Controls® MACH-Global™ building controller is a

powerful, central-point DDC controller designed to support

multiple BACnet® LAN communication technologies

simultaneously through nine ports; 1-IEEE802.3 (Ethernet), 3-

EIA-232 (PC/Modem), 2-EIA-485 (token passing), 2-EIA-422/

485 and 1-MSP (SMART-Net™). This flexible and powerful

controller also supports up to 128 universal input/output hard

points directly onboard using a combination of eight modular

16-point expansion cards. The MACH-Global™ controller is a

dual-protocol device, supporting BACnet® and Reliable

Controls® protocols. A fully configured Reliable-Controls®

MACH-System supports over 2,000,000 points of

measurement.

F E A T U R E SProtocol• BACnet®

- PTP (EIA-232)- MS/TP (EIA-485)- B/IP (Ethernet)- ISO 8802-3

• Reliable Controls®- Ethernet (IP)- PC & Modem (EIA-232)- Network (EIA-485/Token Bus)

128 Control-BASIC™ Programs• User programmable control

strategy in a readable, BASIC-like language

• 2500 bytes per program

128 Inputs/Outputs• Universal ranges

256 Variables• Selectable standard and custom

ranges, as well as fixed or program-driven values

64 PID Loops• Standard P, PI, or PID controllers

for closed loop control

96 Trend Logs• Each trend log stores 512

samples of 6 points at programmable time intervals

128 Runtime Logs• Totals the on time and records

the on/off times of a digital point

64 System Groups• Allows related points to be

grouped on one display• 160 points per group

32 Weekly Schedules• 4 on/off times for each weekday

and 2 override days

8 Annual Schedules• Days of the year designated as

holidays

48 Variable Arrays• Up to 128 elements in a

one-dimensional array

128 User Passwords• Protects access to system• Each user is assigned a user

name and an access level

20 Custom Tables• For creating custom input

ranges

16 Custom Units• 8 analogue engineering units• 8 digital engineering units

SMART-Net™ Port• Networks up to 16

SMART-Sensors™

127 Network In Points

127 Network Out Points

Warranty• 5 years

O R D E R I N GMG• MACH-Global™ controller

Processor• 16-bit embedded microcontroller

Memory• 2 MB of NV RAM

user database• 1 MB Flash EEPROM for

operating system firmware

Supply Voltages• 24 VAC Class 2, 75 VA • 3.15 A slow blow fuse

Communications• 1-IEEE 802.3 Ethernet 10BaseT• 3-EIA-232 @ 115 kbps• 2-EIA-422/485 @ 115 kbps• 2-EIA-485 @ 115 kbps• 1 -SMART-Net™

(16 SMART-Sensors™ max)

Inputs/Outputs• 8 ports, each addressing 16

Input points or Output points

Converters• 12 bit A-D for inputs

• 12 bit D-A for outputs

Real-Time Clock• +/-1 second per day

Memory/RTC Backup• 48 hours by zero maintenance

capacitor

Dimensions• 31.4 cm L x 19.9 cm W x

3.8 cm H (12.4” L x 7.9” W x 1.25” H)

Mounting• #6 clearance holes on

30.0 cm L x 18.5 cm W(11.8” L x 7.25” W) centers

Weight• 1.0 kg (2.5 lb.)

Ambient Limits• Operating: 0 °C to 40 °C

(32 °F to 104 °F)• Shipping: -40 °C to 60 °C

(-40 °F to 140 °F)• Humidity: 10% to 90%

RH non-condensing

MACH-Global™ Control ler

MACH1™ MACH2™ MACH-Air™

MACH-Zone™

Modem

MACH-Global™

Operator WorkStation

MACH-Air™

MACH-Global™ InputExpansion Cards

MACH-Global™ OutputExpansion Cards

Main network toother controllers

Ethernet

MACH2™

Sub network ASub network B

SMART-Sensor™ Printer

24 VAC/VDCPower switch



Submitted To:



Submittal Details:

Date Submitted: 3/30/2006 Date Resubmitted: Specification Section: 15900.2.13 Description: Input Card for Building Controller Model: Mach Global Input Card (MGX-I)

Supplier info:





environments

control building





expansion cards give

MACH-Global™ Input

Ultimate modularity for MACH-Global™ building controller

Universal inputs, 16 per card

Expansion cards provide up to 128 Inputs

Pulse counting @ 40 HZ provides support for flow meters

Status LEDs glow proportionally

Powered by MACH-Global™ building controller

The Reliable Controls® MACH-Global™ Input expansion cards offer a super solution to any new or expanding equipment application, and ship with the Reliable Controls®industry best 5 year warranty.


(8.75” L x 4.5” W x 1.75” H)


Toll Free: 1 (877) 475-9301 Tel: (250) 475-2036 Fax: (250) 475-2096

MGI-11/04-RAR © 2003 Reliable Controls® Corporation Designed and Manufactured in Canada

The Reliable Controls® MACH-Global™ input card is a

general purpose universal input expansion card that is

designed for use with the MACH-Global™ controller. The

expansion card accepts analogue, digital or pulsed

signals at each of its 16 inputs. Each input has two dip

switch poles for configuring the input to be a 0-5 Volt, 4-

20 mA, or themistor/dry contact. A maximum of eight

input cards can be connected to one MACH-Global™

controller. Each input has an LED that glows

proportionally to the input value.

F E A T U R E S16 Universal Inputs• 0-5 VDC pulse, thermistor/dry

contact, or 4-20 mA • Software configured as analogue

or digital

Folded Metal Enclosure• Strong powder coated steel

metal enclosure protects circuitry and adds to the ease of installation

Removable Connectors• Two 16-pole removable

connectors for easy change out

Warranty• 5 years

O R D E R I N GMGX-I• MACH-Global™ input expansion

card

MGX-RC-B• MACH-Global™ expansion card

ribbon cable - base

MGX-RC-C• MACH-Global™ expansion card

ribbon cable - cable per 30 cm/1 ft. up to a max. of 120 cm/4 ft.

MACH-Global™ Input Expansion Card

Supply Voltage• Supplied by MACH-Global™

controller

Inputs• 16 universal inputs• 12 bit A-D converter• Analogue: 0-5 VDC, 4-20 mA,

thermistor• Digital: dry contact• Impedance:

15k Ω on 0-5 VDC range,250 Ω on 4-20 mA range,10k Ω on thermistor range

• 40 Hz pulse counting(supports flow meters)

• 24 VAC over voltage protection

Connectors• Two 16-pole removable

connectors for inputs• One 20-pole ribbon cable

header

Status LEDs• One LED per input,

intensity proportional to input value


4.5 cm H (8.75” L x 4.5” W x 1.75” H)


20.5 cm L x 10.0 cm W(8.12” L x 4” W)




(-40 °F to 140 °F)• Humidity: 10% to 90%

RH non-condensingMACH-Global™ Input Expansion Cards

Expansion Ports

MACH-Global™ Controller

Ribbon Cable to Expansion Cards



Submitted To:



Submittal Details:

Date Submitted: 3/30/2006 Date Resubmitted: Specification Section: 15900.2.13 Description: Output Card for Building Controller Model: Mach Global Output Card (MGX-O)

Supplier info:





environments

control building





expansion cards give

MACH-Global™ Output

Ultimate modularity for MACH-Global™ building controller

Universal outputs, 16 per card, HOA switches standard

Expansion cards provide up to 128 outputs

Output signal configured in RC-Studio® software

Status LEDs glow proportionally

Separate power supply for maximum efficiency

The Reliable Controls® MACH-Global™ Output expansion cards offer a super solution to any new or expanding equipment application, and ship with the Reliable Controls®industry best 5 year warranty.


(8.75” L x 4.5” W x 1.75” H)


Toll Free: 1 (877) 475-9301 Tel: (250) 475-2036 Fax: (250) 475-2096

MGO-11/04-RAR © 2003 Reliable Controls® Corporation Designed and Manufactured in Canada

MACH-Global™ Output Expansion Card

The Reliable Controls® MACH-Global™ output card is a

general purpose universal output expansion card that is

designed for use with the MACH-Global™ controller. Each

of the expansion cards 16 outputs can be independently

configured to deliver an analogue or digital signal. Every

output comes standard with a Hand/Off/Auto switch for

convenient override in the field, and position feedback to

RC-Studio® software. A maximum of eight output cards

can be connected to one

MACH-Global™ controller. Each MACH-Global™ output

card requires its own 24 VAC power source.

F E A T U R E S16 Universal Outputs• 0-12 VDC, analogue• 0-12 VDC, digital • Software configured as analogue

or digital

HOA Switches• Standard for each output• Convenient override in the field• Switch position feedback to

RC-Studio® software

Proportional LEDs• LED brilliance is proportional to

output signal

Metal Enclosure• Strong powder coated steel

metal enclosure protects circuitry and adds to the ease of installation

Removable Connectors• Two 16-pole and one 2-pole

removable connectors for easy change out

Warranty• 5 years

O R D E R I N GMGX-O• MACH-Global™ output expansion

card

MGX-RC-B• MACH-Global™ expansion card

ribbon cable - base

MGX-RC-C• MACH-Global™ expansion card

ribbon cable - cable per 30 cm/1 ft. up to a max. of 120 cm/4 ft.

Supply Voltage• 24 VAC 50 VA Class 2

Outputs• 16 universal outputs• 12 bit D-A converter• Analogue: 0-12 VDC• Digital: 0-12 VDC• Manual ON provides 15 VDC • LED indicator• Output power: 75 mA @ 12 VDC• 24 VAC over voltage and short

protection

Switches• HOA toggle switch• Switch position feedback to

RC-Studio® software

Connectors• Two 16-pole removable

connectors for output• One 20-pole ribbon cable

header• One 2-pole power connector

Status LEDs• One LED per output,

intensity proportional to output value


4.5 cm H (8.75” L x 4.5” W x 1.75” H)


20.5 cm L x 10.0 cm W(8.12” L x 4” W)




(-40 °F to 140 °F)• Humidity: 10% to 90%

RH non-condensing

Fuse• 3.15 A slow blow• 5 A ground protection fuse

MACH-Global™ Output Expansion Cards

Expansion Ports

MACH-Global™ Controller

Ribbon Cable to Expansion Cards



Submitted To:



Submittal Details:

Date Submitted: 3/30/2006 Date Resubmitted: Specification Section: 15900.2.14 Description: VAV Controller Model: Mach Air (MAH-T)

Supplier info:




Ultimate, intelligent, networkable VAV box controller

Completely programmable DDC controller

Relocatable Belimo damper actuator

Mounted directly to your VAV equipment

Trend logs with historical tracking

Accessible environmental building controls

Onboard velocity sensors for flow measurement

BACnet® MS/TP communications (BTL Listed)


environments

control building





controller gives

MACH-Air™ VAV

The Reliable Controls® MACH-Air™ VAV controller is a super solution to any new or replacement air handling application, and ships with the Reliable Controls® industry best 5 year warranty.

© 2003 Reliable Controls Corporation


(9.0” L x 4.8” W x 2.5” H)

Reliable Controls® Corporation, 207-3375 Whittier Ave., Victoria BC, V8Z 3R1

Toll Free: 1 (877) 475-9301 Tel: (250) 475-2036 Fax: (250) 475-2096

MA-11/04-RAR © 2003 Reliable Controls® Corporation Designed and Manufactured in Canada

The Reliable Controls® MACH-Air™ controller is a

programmable, 6 input, 5 output, DDC controller and

shaft-mount damper actuator, combined together into

one device to meet the needs of variable air volume

(VAV) control. The MACH-Air™ controller features

onboard velocity measurement, a 35 in-lb Belimo

actuator, three user specified universal inputs/outputs,

and optional triac outputs. Removable connectors are

standard on the MACH-Air™ controller.

Processor• 25 MHz, high-performance

16-bit embedded microcontroller

Memory• 32k RAM• 128k Flash EEPROM operating

system firmware and controller configurations

Supply Voltages• 24 VAC/VDC, 25 VA max.

Communications• EIA-485 @ 76.8 kbps max.• SMART-Net™

(4 SMART-Sensors™ max.)

SETUP-Tool™• SETUP-Tool™ used for

configuration

Inputs• 3 universal inputs• 10 bit A-D converter• Analogue: 0-5 VDC, 4-20 mA,

thermistor• Digital: dry contact• Impedance: 15k Ω on 0-5 VDC

range• 40 Hz pulse counting

(supports flow meters)• 24 VAC over voltage protection

Outputs• 3 universal outputs• 8 bit D-A converter• Analogue: 0-12 VDC

• Digital: 0-12 VDC• Output power: 75 mA @ 12 VDC• 24 VAC over voltage and short

protection

Single Stage Triac Outputs• 24 VAC @ 1 A

Dual Stage Triac Outputs• 24 VAC @ 1 A• Common return

Velocity Sensors• Flow-through thermistor• 0-1” W.C.

Actuator• Torque: 35 in-lb.

Enclosure• NEMA type 1• UL94-5V

Dimensions• 22.9 cm L x 13.4 cm W x 6.3 cm

H (9” L x 4.8” W x 2.5” H)



(32 °F to 104 °F)• Shipping: -20 °C to 60 °C)

(-40 °F to 140 °F)• Humidity: 10% to 90%

RH non-condensing

F E A T U R E SProtocols• BACnet®

- MS/TP (EIA-485)• Reliable

- Network (EIA-485/Token Bus)

8 Control-BASIC™ Programs• User programmable control

strategy in a readable, BASIC-like language

• 2000 bytes per program

6 Inputs• 3 Inputs with universal ranges • Jumper selectable 0-5 VDC,

4-20 mA, thermistor/dry contact• Input #4 dedicated to the flow

sensor• Input #5 dedicated to the damper

position feedkback• Input #6 dedicated to indicate

damper at end of position

5 Outputs• 3 Outputs with universal ranges• Scalable 0-12 VDC• Output #4 dedicated to damper

motor• Output #5 dedicated to control

direction of rotation to close• Single stage triac (T model only)• Dual stage triac (T model only)

48 Variables• Selectable standard and custom

ranges, as well as fixed or program-driven values

• Variable #1 dedicated to flow calibration

4 Controllers• Standard P, PI, or PID controllers

for closed loop control

2 Trend Logs• Each trend log stores 150 samples

of 6 points at programmable time intervals

4 Runtime Logs• Totals the on time and records the

on/off times of a digital point

2 System Groups• Allows related points to be grouped

on to one display

• 50 points/group

1 Weekly Schedule• 4 on/off times for each weekday

and 2 override days

1 Annual schedule• Days of the year designated as

holidays

5 Custom Tables• For creating custom input ranges

and Control-BASIC™ lookup tables

SMART-Net™ Port• Networks up to 4 SMART-Sensors™ • SMART-Sensor™ #5 is dedicated

to SETUP-Tool™

32 Network In Points

32 Network Out Points

Warranty• 5 years

Certi f icat ion• UL listed 916

OPEN ENERGY MANAGEMENT EQUIPMENT

O R D E R I N GMA• MACH-Air™ controller with 3

universal inputs and 3 universal outputs

MA-T• MACH-Air™ controller with 3

universal inputs and 1 universal output, 1 single stage triac output, 1 dual stage triac output.

MA-P• MACH-Air™ controller with

potentiometer position feedback

MA-TP• MACH-Air-T™ controller with

potentiometer position feedback

MA-WA• MACH-Air™ without actuator

MA-WF• MACH-Air™ without flow sensor

MA-C• MACH-Air™ connector cover

MAZ-ST• SETUP-Tool (required for

configuration)

MACH-Air™ VAV Control ler

24VAC

GND

A-

B+

AOUT+

AOUT-TRIAC1RTN-T1DS1-T1DS1-T2RTN-DS1IN 1+

GND

IN 2+

IN 3+

GND

24VAC

GND

A-

B+

OUT 1+

OUT 1-OUT 2+

OUT 2-OUT 3+

OUT 3-IN 1+

IN 1-

IN 2+

IN 2-

IN 3+

IN 3-

MACH-Air™-TConnector Wiring

MACH-Air™

Connector Wiring

24 VAC 60Hz PowerEIA-485 NetworkOutput-1Output-2Output-3Input-1Input-2Input-3

SMART-Sensor™

BACnet is a registered trademark of ASHRAE. ASHRAE does not endorse, approve or test productsfor compliance with ASHRAE standards. Compliance of listed products to requirements of ASHRAE

Standard 135 is the responsibility of the BACnet Manufactures Association (BMA). BTL is a registeredtrademark of the BMA



Submitted To:



Submittal Details:

Date Submitted: 3/30/2006 Date Resubmitted: Specification Section: Description: Line Filter/Surge Suppressor Model: PLF-2

Supplier info:


Manufacturer info: Name: Corcom Address: 844 E. Rockland Road Libertyville, IL 60048-3375 Website www.cor.com


CORCOM Product Guide

RFI Power Line Filters for Switching Power Supply Noise Suppression

The EP/VP series of RFI filters has been developed toreduce conducted noise to acceptable limits forequipment that must comply with the requirementsof CISPR in Europe and the FCC specifications in the USA.

These filters provide high insertion loss for both line-to-ground and line-to-line emissions throughout thefrequency range. They are particularly well suitedfor equipment to better meet both stringent emissionsspecifications (such as CISPR 22, A-level and FCCPart 15J, Class B) and the EP models meet very lowleakage current requirements.

SpecificationsMaximum leakage current,each line-to-ground

VP Models EP Models@ 120 VAC 60 Hz: .73mA .21mA@ 250 VAC 50 Hz: 1.27mA .36mA

Hipot rating (one minute):line-to-ground 2250 VDCline-to-line 1450 VDC

Operating frequency: 50/60 Hz

Rated voltage (max.): 250 VAC

Rated current:03EP 03A06EP 06A10EP 10A20EP/VP 20A

Minimum insertion loss in dB:Line-to-ground in 50 ohm circuit

Current Frequency–MHzRating .01 .04 .05 .15 .5 1 5 10 30

EP3A 1 1 10 58 65 65 66 60 256A,10A 1 1 10 58 65 65 66 60 2520A 3 6 6 28 50 55 60 55 55

VP20A 3 2 2 42 60 65 65 55 55

Line-to-line in 50 ohm circuitCurrent Frequency–MHzRating .01 .09 .15 .5 1 5 10 20 30

EP1, EP3 3A 1 5 36 65 65 65 65 58 586A,10A 1 5 30 65 65 65 65 35 3520A 8 17 25 60 65 65 58 58 58

VP 20A 8 17 25 60 65 65 58 58 58

50Catalog 1654001 Dimensions are in inches and Dimensions are shown for USA Cust. Svc.: 1-800-468-2023 www.cor.comRevised 03-04 millimeters unless otherwise reference purposes only. CORCOM Prods: 1-847-680-7400 www.tycoelectronics.com

specified. Values in italics Specifications subject 1-508-992-4495are metric equivalents. to change. Germany: 49-89-6089-0

EP/VP Series

EP/VP Series

Electrical Schematic

Resistor location for reference only.

LINE LOAD

Line CordLine Cord No. GA400:71/2 foot, 3-conductor line cord.

EP1/VP1

EP7/VP7

EP3/VP3

UL RecognizedCSA CertifiedVDE Approved

EP3/VP3

jleroy5004

RT

jleroy5004

RT

jleroy5004

RT

CORCOM Product Guide

RFI Power Line Filters for Switching Power Supply Noise Suppression (Continued)

Case Styles

Case DimensionsA B C D E

± .015Part No. (max) (max) (max) (max)± .38

3EP1 3.85 2.07 1.78 2.938 3.3597.8 52.6 45.2 74.63 85.1

3EP3 2.56 2.07 1.78 2.938 3.3565.0 52.6 45.2 74.63 85.1

3EP7 3.21 2.25 1.78 1.575 0.6381.5 57.2 45.2 40.01 12.1

3EP7M 3.21 2.25 1.78 1.575 0.6381.5 57.2 45.2 40.01 12.1

6EP1 6.62 2.07 2.28 5.625 6.03168.1 52.6 57.9 142.88 153.2

6EP3 5.33 2.07 2.28 5.625 6.03135.4 52.6 57.9 142.88 153.2

10EP1 6.62 2.07 2.78 5.625 6.03168.1 52.6 70.6 142.88 153.2

10EP3 5.35 2.07 2.78 5.625 6.03135.9 52.6 70.6 142.88 153.2

20EP1, 20VP1 4.95 2.27 1.8 4.063 4.47125.7 57.7 45.7 103.2 113.5

20EP6, 20VP6 5.09 2.25 1.78 4.063 4.46127.3 57.2 45.2 103.2 129.3

51Catalog 1654001 Dimensions are in inches and Dimensions are shown for USA Cust. Svc.: 1-800-468-2023 www.cor.comRevised 03-04 millimeters unless otherwise reference purposes only. CORCOM Prods: 1-847-680-7400 www.tycoelectronics.com

specified. Values in italics Specifications subject 1-508-992-4495are metric equivalents. to change. Germany: 49-89-6089-0

RFI Power Line Filters

EP/VP Series

Part Numbers

3EP1 10EP13EP3 10EP33EP7 20EP13EP7M 20EP66EP1 20VP16EP3 20VP6

Line Cord No. GA400

DEA C

B

EP1/VP1

EP3

EP7 & EP7M (with metric insert)

20EP/VP6

Typical dimensions:Terminals: .250 [6.35] (5) Holes: .07 [1.8] Dia.(4)Mounting Holes: .188 [4.78] Dia. (2) Slot: .07 x .16 [1.8 x 4.1]

Typical dimensions:Wire leads: 4.0 [101.6] Min. Mounting Holes: .188 [4.78] Dia.(2)

Typical dimensions:Terminals: .250 [6.35] (3) Holes: .07 [1.8] Dia.(2)Slot: .07 x .16 [1.8 x 4.1]

ADE C

B

Brown

Blue

Brown

Blue

Green/Yellow

A

Tapped insert:

D

E

No. 6-32 x 1/4 (2)-EP7No. M-3 x .5 (2)-EP7M

C

B

.2355.96

1.57540.01

.1573.98

.91023.11

Dia. (2)

1.29532.89

R

Panel Cutout (back mount)

C

B

ED

A

Terminals: No. 8-32 (5) Torque: 18 ± 2 in.lb

Tolerance ±.005 [0.13]

†

†

† ±.02 [±.5]

jleroy5004

RT

jleroy5004

RT

jleroy5004

RT



Submitted To:



Submittal Details:

Date Submitted: 3/30/2006 Date Resubmitted: Specification Section: Description: Low voltage relay Model: M15MAH001812VDC c/w ZD35 base

Supplier info:

Name: Carlo Gavazzi (Canada) Inc Address: 2660 Meadowvale Boulevard, Mississauga, ON L5N 6M6

Manufacturer info: Name: Carlo Gavazzi (Canada) Inc Address: 2660 Meadowvale Boulevard, Mississauga, ON L5N 6M6 Website www.GavazziOnline.com


65CARLO GAVAZZI Automation Components Specifications are subject to change without notice.

Miniature Relays

Dimensions (mm) H x W x DTerminal typesNo. of Contacts

Contact rating

Output SpecificationsMax. load AC1Min. loadElectrical life

Switching power

General SpecificationsVoltage ranges VDC

Voltage ranges VAC

Insulation Coil/ContactConsumptionApprovals/Conformity

ReferencesConsult your Carlo GavazziPartner or Distributor

15.7 x 29 x 12.7PCB1 Change-over (1 pole)2 Change-over (2 poles)

12 A - 16 A (1 pole)8 A (2 poles)

9 A - 13 A - 18 A100 mA at 24 mVDC1x105 cycles

4000/3000/2000 VA

5 - 6 - 12 - 24 - 4860 - 110

4000 VAC5 00 mWcUL - VDE

From 5 to 110 VDC

15 x 29 x 10PCB1 Normally open1 Change-over

8 A

10 A100 mA at 24 mVDC100.000 cycles

2000 VA

3-5-6-8-12-18-24-48110 (M15) 3-5-6-8- 12-18-24-48 (M15R)

4000 VAC 220 mWUL - CSA - VDE - IMQS - N - D - F - SEV

3 to 110 VDC (M15)3 to 48 VDC (M15R)

25.2/26.5 x 29.4 x 12.5PCB2 Normally open

2 Change-over5 A - 10 A

6 A - 12 A100 mA at 24 mVDC2.5 x 105 cycles (5 A)8 x 104 cycles (10 A)1250/2500 VA

3 - 5 - 6 - 9 - 12 24 - 36 - 48 - 6080 - 100 - 1106 - 12 - 24 - 48 - 60110 - 2304000 VACSee PCB General Cat.UL - CSA - VDE - IMQS - N - D - F - SEV

From 2.5 to 260 VDCFrom 6 to 260 VAC

25.2/26.5 x 29.4 x 12.5PCB1 Normally open

1 Change-over5 A - 10 A - 16 A

6 A - 12 A - 20 A100 mA at 24 mVDC3.5 x 105 cycles (5/10A)1.5 x 105 cycles (16A)1250/2500/4000 VA

3 - 5 - 6 - 9 - 12 24 - 36 - 48 - 6080 - 100 - 1106 - 12 - 24 - 48 - 60110 - 2304000 VACSee PCB General Cat.UL - CSA - VDE - IMQS - N - D - F - SEV

From 1.8 to 160 VDCFrom 6 to 264 VAC

MZ MZ M15 - M15 R1/R2 M25(1 Pole) (2 Poles) (1 Pole) (1or 2 Poles)Types

General SpecificationsRated volt. / Rated curr.Insulation voltageSocket materialMounting Protection degreeApprovals

ReferencesFor detailed informationsconsult your Carlo GavazziPartner or Distributor

300 VAC / 12 A 5 / 8 pole socket.> 5 kV Screw terminal Self-ext. PA 6 + GF (V1) connection.DIN-rail Standardized markings.IP 20UL, CSA (12 A 300 VCA)

ZD 25 For relay: M15 F 8 AZD 32 For relay: M15 E 8 AZD 35 For relay: MZ 1P 5/10 A

M15 M 8AM25 1P 12 A

ZD 50 For relay: MZ B 1P 5/10 AMZ 2P 5/10 AMZ 1P 16 AM15 M 8 AM25 1P 16 AM25 2P 8 A

300 VAC / 12 A 5 / 8 pole socket.> 5 kV Screw terminal Self-ext. PA 6 + GF (V1) connection.DIN-rail Standardized markings.IP 20UL, CSA (12 A 300 VCA)

ES 50/3 For relay: MZ B 1P 5/10 AMZ 2P 5/10 AMZ 1P 16 AM15 B 8 A

Types ZD 25 - ZD 32 - ZD 35 - ZD 50 ES 50/3

jleroy5004

Rt with tail

jleroy5004

Rt with tail

jleroy5004

Rectangle

jleroy5004

Rectangle



Submitted To:



Submittal Details:

Date Submitted: 3/30/2006 Date Resubmitted: Specification Section: 15900.2.11 Description: Current transducer Model: CS-450-1

Supplier info:




Peace of mind through reliable current sensors

CURRENT SENSORS

Detect current fluctuation remotely and reliably

• Solid Core CS-450 & CS-475 Series Current Sensors • Split Core SC-550 & SC-575 Series Current Sensors • CT/PT Input transducer


AC CURRENT SENSORS CS-450 / 475 and SC-550 / 575

• Three ranges per unit reduces inventory

• No field adjustment necessary, factory calibrated

• Average measurement is equivalent to True RMS for pure sine waves for the CS-450 / SC-550 series

• True RMS measurement for sine waves or variable frequency drives for the CS-475 / SC-575 series

• Input / Output isolation via current transformer

• Solid-state reliability

• Small compact size

FEATURES:

SOLID-STATE SENSORS FOR MONITORING AC CIRCUITS.

DESCRIPTION:

CURRENT SENSOR: PRODUCT ORDERING INFORMATION

GREYSTONE ENERGY SYSTEMS INC.

SPECIFICATIONS:

The CS-450 / 475 and SC-550 / 575 series of AC current sensors are solid-state transducers that convert a primary circuit current to a proportional output signal. The sensors can monitor up to 200 Amps continuous and feature three jumper selectable current ranges for the highest accuracy. All sensors are factory calibrated to ensure better than

1% accuracy. The CS-450 and the SC-550 are available with 0-5, 0-10 Vdc or 4-20 mA output signal types. The CS-475 and the SC-575 feature a true RMS 4-20 mA loop-powered output signal. All models are CSA certified, UL Approved and CE compliant.

CS-45X / SC-55X CS-475 / SC-575 Power Supply 0-5/0-10 Vdc models are self-powered, 4-20 mA model

requires 15-42 Vdc at sensor 15-42 Vdc at sensor (loop powered)

Input Current Ranges Three field selectable ranges (see below) Three field selectable ranges (see below)

Maximum Input Current

10/20/50 Amp ranges-80/120/180 Amps continuous 50/100/200 Amp ranges-120/200/325 Amps continuous

2/5/10 Amp ranges – 35/60/90 Amps continuous 10/20/50 Amp ranges – 80/120/200 Amps continuous 50/100/200 Amp ranges – 175/300/400 Amps continuous

Response Time 100 mS (0-90%) 250 mS (0-90%)

AC Conductor Hole

Solid Core – 20mm (0.8”) diameter Split Core – 24 x 19 mm (0.95 x 0.75”)

Solid Core – 20mm (0.8”) diameter Split Core – 24 x 19 mm (0.95 x 0.75”)

Output Loading Error (0-5/0-10) Calibrated with 1 M ohm load, add 1.2% error with 100k ohm load N/A

Enclosure Size (H x W x D)

Solid Core – 49 x 87 x 25 mm (1.95 x 3.45 x 1.0”) Split Core – 70 x 87 x 30 mm (2.75 x 3.45 x 1.2”)

Solid Core – 49 x 87 x 25 mm (1.95 x 3.45 x 1.0”) Split Core – 70 x 87 x 30 mm (2.75 x 3.45 x 1.2”)

Operating Temperature -30 to 70°C (-22 to 158°F) 0 to 70°C (32 to 158°F)

Operating Humidity 0 to 95% RH, non-condensing 0 to 95% RH, non-condensing

Protection Circuitry Reverse voltage protected and output limited Reverse voltage protected and output limited

Wiring Connections

Solid Core – Barrier strip Split Core – Screw terminals (14 to 22 AWG)

Solid Core – Barrier strip Split Core – Screw terminals (14 to 22 AWG)

Enclosure Material UL 94 V-0 flammability rated ABS, Insulation class 600V UL 94 V-0 flammability rated ABS, Insulation class 600V

Manufacturing ISO 9002 Certified ISO 9002 Certified

Output Signal & Accuracy 0-5 Vdc, 0-10 Vdc or 4-20 mA Better than ±1% FS on all three ranges

4 to 20 mA represents 0 to 100% of current span Better than ±1% FS on all three ranges

Solid Core (CS)

Model Output Accuracy Frequency Model Output Accuracy Frequency

CS-450-1 0-5 Vdc ±1% FSO 40 – 100 Hz SC-550-1 0-5 Vdc ±1% FSO 40 – 100 Hz




Split Core (SC)

CS-452-1 4-20 mA ±1% FSO 40 – 100 Hz SC-552-1 4-20 mA ±1% FSO 40 – 100 Hz

CS-452-2 4-20 mA ±1% FSO 40 – 100 Hz SC-552-2 4-20 mA ±1% FSO 40 – 100 Hz

Amp Ranges

0-10/0-20/0-50

0-50/0-100/0-200

0-10/0-20/0-50

0-50/0-100/0-200

0-10/0-20/0-50

0-50/0-100/0-200

Amp Ranges

0-10/0-20/0-50

0-50/0-100/0-200

0-10/0-20/0-50

0-50/0-100/0-200

0-10/0-20/0-50

0-50/0-100/0-200

CS-475-1 4-20 mA ±1% FSO 10 – 400 Hz 0-10/0-20/0-50 SC-575-1 4-20 mA ±1% FSO 10 – 400 Hz 0-10/0-20/0-50



vicengineer5004

Right

vicengineer5004

Right



Split Core SC-550 & SC-575 Series Current Sensor

Cop

yrig

ht ©

Gre

ysto

ne E

nerg

y S

yste

ms

Inc.

All

Rig

hts

Res

erve

d

Solid Core CS-450 & CS-475 Series Current Sensor

87 mm (3.45”)

49 mm (1.95”)

20 mm (0.8”) diam.

24 mm (0.95”)

30 mm (1.2”)

87 mm (3.45”)

70 mm (2.75”) 19 mm

(0.75”)

25 mm (1.0”)

Options Relay Mounting Base CR-112 / CR-124

DESCRIPTION:

SPECIFICATIONS: (NOTE: COMMAND RELAY DOES NOT ACCEPT A VARIABLE ANALOG SIGNAL

Relay Coil CR-112 12 Vac/dc ± 20% @ 18 mA CR-124 24 Vac/dc ± 20% @ 10 mA

Enclosure Size (L x W x D)

102 x 44 x 25 mm (4 x 1.75 x 1”) 125 mm (4.9”) length with mounting tabs

Relay Contacts

SPDT Form C (normally open, common, normally closed) 10 Amp resistive @ 250 Vac (UL508) 8 Amp inductive @ 250 Vac 5 Amp @ 30 Vdc

Mounting Holes Dimension

114 mm (4.5”) spacing, 4.8 mm (0.19”) diameter

Contact Resistance 100 mΩ maximum Enclosure Material UL 94V-0 flammability rated ABS

Oper. Temperature -40 to 85°C (-40 to 185°F) Operating Humidity 20 to 85% RH, non-condensing

Wiring Connections Screw terminal block (12 to 28 AWG) Manufacturing Process

ISO 9002 Certified

• Can be easily mounted to any CS or SC product for easier installation

• Can be used as a stand-alone relay

• Convenient Relay Status LED

• Can be factory assembled with any CS or SC product

• Push-rivets supplied for fast and reliable field assembly

• SPDT Form C relay contacts

• Environmentally-friendly cadmium-free contacts

• Ideal for switching contactors, solenoids and motors

• Small compact size

FEATURES:

The CR-112 and CR-124 Command Relays are line voltage relays for use with the CS and SC current sensors and switches or as

stand-alone devices. All models are CSA certified, UL approved and CE compliant.

Greystone Energy Systems Inc. is one of North America’s largest ISO registered manufacturers of HVAC sensors and transducers for Building Automation Management Systems. We have conscientiously established a worldwide reputation

as an industry leader by maintaining leading-edge design technology, prompt technical support, and a commitment to

on-time deliveries. We take pride in our Quality Management System which is ISO 9002 certified, assuring

our customers of consistent product reliability.

vicengineer5004

Right



Submitted To:



Submittal Details:

Date Submitted: 3/30/2006 Date Resubmitted: Specification Section: 15900.2.10.2 Description: Differential pressure sensor Model: LP1B00

Supplier info:




Peace of mind through reliable

pressure transducers

GREYSTONE HAS AN ISO 9001 REGISTERED QUALITY SYSTEM

Each series of Greystone low pressure transducers comes standard with an ABS enclosure. These transducers feature high level outputs, environmental protection, and temperature compensation.

FEATURES: • Jumper selectable 2 wire current and

3 wire voltage outputs standard • 24 Vac/dc power supply standard • Eight variable jumper selectable pressure

range’s, WC and PA • Functional weather resistant ABS Enclosure • Available options include LCD display and

mounted static probe • Two available accuracy's

LOW PRESSURE TRANSDUCERS

LP1 Series

Shown above c/w LCD and mounted static probe options

SPECIFICATIONS: LP1 Series Pressure Ranges See ordering information

Calibration Accuracy ± 1% F.S.O. (LP1A/B Series)

Measurement Type Differential (two port)

Response Time 1 mS maximum

Stability <±1% F.S.O. per year

Thermal Effects <±3% over compensated range

Compensated Range 10 – 50°C (50 – 122°F)

Over Pressure 20 psi or 2 x range (whichever is greater)

Operating Conditions 0 – 60°C (32 – 140°F), 10 – 90% RH non-condensing

Media Compatibility Limited only to those that will not attack polyetherimide, silicon, fluorosilicone, silicone, EPDM, and neoprene seals. Typically dry air or inert gas but liquid is allowed.

Power Supply (at transmitter) 12 – 28 Vac, 16.5 – 35 Vdc (non-isolated half-wave rectified)

Supply Current <4 mA

Input Voltage Effect Negligible over specified operating range

Protection Circuitry Reverse voltage protected and output limited

Output Signal 4 – 20 mA (2-wire), 0 – 5 Vdc or 0 – 10 Vdc (3-wire)

Current Output Drive Capability 400 ohms maximum @ 24 Vdc

Voltage Output Drive Capability 2 Kohms minimum for 0-5 Vdc signal 10 Kohms minimum for 0-10 Vdc signal

Zero Adjustment Pushbutton auto-zero

Wiring Connections Screw terminal block (14 to 22 AWG)

Pressure Connections Barbed ports for 0.170” ID flexible tubing

Conduit Connection Access hole for 1/2” NPT conduit or cable gland

Optional LCD 3½ digit, 0.4” digit height

Enclosure High Impact Black ABS, plenum rated with optional gasket 116 mm W x 84 mm H x 53 mm D (4.55” x 3.3” x 2.1” )

± 1.25% F.S.O. (LP1C Series)

• HVAC/VAV • Process Control • Air Flow Monitoring

• Drop Across Air Filters • Hydraulic Pressures • Pneumatic Pressures

APPLICATIONS:


LP1 c/w LCD LP1 c/w LCD & Mounted static probe

JUMPER SELECTABLE LP1 SERIES: PRODUCT ORDERING INFORMATION


The LP1 Low Pressure Transmitter can be used to measure positive, negative or differential pres-sure in the ranges of 0.25”wc to 12”wc (50 TO 2000Pa). The piezoresistive sensor is ideal for moni-toring the pressure for air or other clean inert gas and is limited only to those media which will not attack polyetherimide, silicon, fluorosilicone, silicone, EPDM and neoprene seals. The LP1 features field selectable pressure ranges and output signal types for the most flexible ap-plication. Typical HVAC applications include monitoring of filter differential pressure or clean room pressure. The output signal is factory calibrated and temperature compensated for highest startup accuracy and trouble-free operation. Available options include accuracy’s, LCD, mounted static pressure probes and access options for room pressure monitoring. Please read the installation instructions carefully before commissioning the pressure transmitter. Failure to follow the instructions may result in product damage. A qualified technician must install this device. The LP1 Pressure Transmitter mounts on any surface using the two holes provided on the base of the unit. Make sure there is enough space around the unit to connect the pressure tubing without kinking and avoid locations where severe vibrations or excessive moisture are present. Mount the enclosure with two user-supplied screws but do not over-tighten. The unit may be mounted in any position but typically is installed on a vertical surface with the pres-sure ports on the right and the cable entrance on the left. The enclosure has a standard ½” conduit opening and may be installed with either conduit and a conduit coupler or a cable gland type fitting. Do not use in an explosive or hazardous environment, with combustible or flammable gasses, as safety or emergency stop devices or in any other application where failure of the product could result in personal injury. Use electrostatic discharge precautions during installation and do not ex-ceed the device ratings.

DESCRIPTION:

Model Description

LP1 Jumper Selectable Low Pressure Transducer

CODE Optional accuracy's

A B C

± 1% F.S.O. LCD Display (Only available in ± 1% configuration) ± 1.25 % F.S.O.

CODE Jumper Selectable Pressure Ranges

00 01 02 03

±0.25”, ±0.5“, ±1”, ±2”, 0-0.5”, 0-1”, 0-2”, 0-4” wc ±0.75”, ±1.5”, ±3”, ±6”, 0-1.5”, 0-3”, 0-6”, 0-12” wc ±50, ±100, ±200, ±400, 100, 200, 400, 800 Pa ±125, ±250, ±500, ±1000, 250, 500, 1000, 2000 Pa

LP1 B 00

Example: LCD, ±0.25” to 0-4” wc, Static Pressure Probe

S

CODE

S R

Options

Mounted Static Pressure Probe (N/A with LP1C series) Room Pressure Model, all electrical and pressure connections on back

Typical Model Number

vicengineer5004

Right

vicengineer5004

Right

vicengineer5004

Right

Greystone Energy Systems Inc. is one of North America’s largest ISO registered manufacturers of HVAC sensors and transducers for Building Automation Management Systems.

We have conscientiously established a worldwide reputation as an industry leader by maintaining leading- edge design technology, prompt technical support, and

a commitment to on-time deliveries. We take pride in our Quality Management System which is ISO 9001 certified,

assuring our customers of consistent product reliability.

150 English Drive, Moncton, NB, Canada E1E 4G7 e-mail: [email protected] Tel.: (506) 853-3057 Fax: (506) 853-6014 web site: www.greystoneenergy.com

DIMENSIONS:

84 mm (3.3")

116 mm (4.55") 53 mm (2.1")

OPTIONS:

Pitot Tube HFO & HSO Series

Differential Pressure Probe SSS Series

The SS series DP probe is used for sensing velocity pressure in the duct. Available in 4”, 6”, 8” & 10” lengths. Kits are available that come complete with pneumatic tubing.

The HFO and HSO series are used to sense velocity pressure or static pressure respectively. Available in 6” length. Kits are available for differential and static that are complete with pneumatic tubing.

ABS enclosure dimensions

Static Probe Option The S option is a high accuracy static tube. It is available as an option on the LP1A / B Series low pressure transducer.

vicengineer5004

Right



Submitted To:



Submittal Details:

Date Submitted: 3/30/2006 Date Resubmitted: Specification Section: 15900.4.10.2 Description: Light Sensor Model: PSR-1

Supplier info:




DESCRIPTION: The PSR-1 is a Light Sensitive Resistor that may be used as an input to indicate the presence of light at the sensor location. The PSR-1-T is a PSR-1 coupled with a B420-P transmitter. The PSR-1-T produces a 4 – 20mA ouput signal. The sensor is designed to be mounted in the end of a weatherproof conduit box.

APPLICATION: The PSR-1 has a resistance in darkness in excess of 1 MΩ and resistance in bright light of less than 1.5 kΩ. The PSR-1 and PSR-1-T indicate the presence of absence of light. They should not be used for footcandle control of occupied spaces. The PSR-1-T is calibrated for 4mA in bright light > 100 foot-candles and 20mA in darkness < 0.1 foot-candles.

SPECIFICATIONS: PSR-1 Output (non-linear) >1 MΩ in dark <1.5 kΩ in bright light Temperature -25°C to 75°C (-13°F to 167°F) PSR-1-T Power 12 – 35 VDC Max current draw 22 mA Output (linear) 4–20mA (current limited to 22 mA) Temperature -25°C to 75°C (-13°F to 167°F)

MODEL PRODUCT DESCRIPTION

PSR

CODE OPTIONS

1 Sensor only

T 4 – 20mA Transmitter

E Weatherproof Enclosure

RESISTIVE LIGHT SENSOR

PSR: PRODUCT ORDERING INFORMATION

EXAMPLE: Light sensor c/w 4 – 20mA output in weatherproof enclosure

PSR-1-T-E

DESCRIPTION: The WD100 is a microchip-based device that uses gold-plated sensing probes to detect the presence of water or other conductive liquid. The WD100 is powered by an AC or DC source, 14 – 30 volts. It features normally open and normally closed (form C) relay contacts rated at 5A@120VAC/30DC for connection to a monitoring system, or direct control of another device. The mounting legs will allow a sensing height adjustment from 0” to 1/2”. The WD100 is designed to signal an alarm if one or more of three conditions are met: water is detected, power is lost to the unit, or if there is an internal failure. The WD100 provides the highest level of water detection confidence. The WD-102 operates on the same principle as the WD-100 but comes with a 5 ft. remote probe. For custom lead lengths please contact Greystone. The WD-100-xx Series c/w the specified length of conductivity cable. See ordering information for available lengths. SPECIFICATIONS: Power supply: 14 – 30 VAC/DC Supply current 60mA @ 24 VDC, (no water) Operating temperature: -40° to 85°C(-40° to 185°F) Enclosure dimension 127 x 127 x 102 mm (L x W x H) 5-3/8“ x 5-3/8“ x 4” (max) (mounting legs@ 127 x 127 x 102mm max/min height): 5-3/8“ x 5-3/8“ x 3½”(min) Alarm output: Form C relay, rated @ 5 amps @ 120VAC / 30VDC (resisitive load)

APPLICATIONS: The following chart gives examples of what types of fluids the WD100 can and can not be used to detect.

OTHER FEATURES: Fail-safe circuitry

Reverse acting contacts Reverse voltage protection

RFI/EMI noise immunity

ORDERING INFORMATION: WD-100 – Stand Alone WD-102 – Remote Probe (5‘) WD-100-5 – c/w 5’ conductivity cable WD-100-10 – c/w 10’ conductivity cable WD-100-25 – c/w 25’ conductivity cable WD-100-50 – c/w 50’ conductivity cable WD-100-100 – c/w 100’ conductivity cable

LIGHT SENSOR – PSR SERIES

WATER DETECTOR – WD100 SERIES

Fluids than can be detected

Fluids that can’t be detected

City water Pure water

Sea water Gasoline

Copper sulfate solution Oil

Weak acid Brake fluid

Weak base Alcohol

Household ammonia Ethylene glycol

Water & glycol mixture Paraffin

Wet soil Dry soil

Coffee Whiskey


vicengineer5004

Right

vicengineer5004

Right

vicengineer5004

Right



Submitted To:



Submittal Details:

Date Submitted: 3/30/2006 Date Resubmitted: Specification Section: 15900.2.16 Description: Water flow meter Model: TX81B Insertion Turbine Meter with FT420 Flow Computer

Supplier info:

Name: Van Isle Water Address: 461 Dupplin Rd., Victoria BC V8Z 1B8

Manufacturer info: Name: Seametrics Address: 20419 80th Ave. So., Kent WA 98032 Website www.seametrics.com


SensorHall Effect Sensor 12 VDC current

sinking pulseMaterials

Sensor Body Polypro, Brass, 316 SSRotor Polypro, PVDF optionalShaft Nickel-bound tungsten

carbide,zirconia ceramicoptional

Bearings RubyRange 0.2 - 30 FPS (0.06-9.14M/s)Acuracy ± 1% FSMaximum Pressure

Polypro 175 psi @ 75° F (12 bar)Brass 200 (14 bar)316 SS 250 psi (17 bar)

Maximum TemperaturePolypro 130° F (55° C) at 0 psiBrass, SS 200° F (93° C)

Power 6-24VDC, 8 mANominal K-factor 11 Hz/FPS (3.6 HzM/s)Cable #22 AWG 3-con 18' (6m)Maximum Cable Run 2,000' (650m)Flow Range (GPM)

SpecificationsGeneral Information

The TX80 Series are turbine-type insertion meters de-signed for use in pipe sizes 1" to 8". High-quality jewelbearings and nickel-bound tungsten carbide shaft areused for maximum life and extreme low friction. Bodiesare machined from solid rod for maximum precision. Low-flow performance is superior. The rotation of the rotor isdetected by a non-drag Hall-effect sensor. Output is apulse-type square wave, which can be sent long dis-tances (up to 2,000 feet) without a transmitter. This sig-nal can be connected directly to SeaMetrics controls, aswell as PLC's, counters, and computer cards.

SeaMetrics TX80 meters are ideal for chemical propor-tioning applications. If no display is required, a simpledivider such as the PD10 provides adjustable pump pac-ing. For rate and total display, as well as pump pacing,the FT420 flow indicator can be mounted directly on theTX80 Series, or remotely on a wall or panel.

The TX80 Series require special fittings, since they arenot depth-adjustable, installation in the fitting ensurescorrect depth placement in the pipe. Fittings are avail-able in PVC, brass, and stainless steel. Sensors are avail-able in brass, 316 stainless steel, and polypropylene. Inplastic pipe 3"-8", use an IP82 sensor, which is 1.00"longer than the IP81 to accommodate the larger fittings.

LT-10614APage 1 of 4

Features

TX80 Series FlowSensor Instructions

Pipe stubs providedfor ease of installation.Solvent weld or

male NPT

Each fitting individuallycalibrated and marked

with K-factor(Pulses per Gallon)

Fitting automaticallysets probe at correctdepth and orientation

Jewel bearings forsuperior low-flow

performance.Threaded housings

allow for field repair

MO

DE

LS

ER

IAL

High level (12 VDC)signal can be sentup to 2000+ feetwithout transmitter

Meter mount optionfor electronics:Rate/Total4- 20 mA blind transmitterPulse DividerBattery Rate/Total

Min.

Max.

1" 1-1/2" 2" 3" 4" 6" 8"

0.8 1.9 3.1 6.9 12 27 47

80 190 314 691 1200 2700 4700

Installation

Fitting Installation. TX80 Series meters require spe-cial fittings. The meter fitting must first be installed in thepipeline. Straight pipe of at least ten times the diameterupstream of the meter and five diameters downstreamare strongly recommended. Inadequate straight pipe,especially downstream of an elbow, change in pipe di-ameter, or partially-opened valves, can result in signifi-

cant inaccuracy. Typically this inaccuracy is in the formof the meter reading "high". TX80 Series meter fittingsare supplied with some upstream straight pipe. In thelarger sizes, the length provided is less than ten diam-eters upstream and five downstream. It is not advisableto connect directly to the end of these fittings with a flow-disturbing device such as a valve or elbow. If possible,straight pipe should be added to these fittings.

A PVC fitting is usually installed by solvent welding. Thestainless steel and brass meter fittings have female pipethreads, requiring the appropriate male threaded fittings.Saddle fittings (size 3" and above) require a hole to becut in the pipe. The recommended hole size is 1-3/4".

!Caution: Never remove the u-clip retainer when the pipe isunder pressure. Always removepressure from the pipe beforeattempting to remove the meter.

Removal under pressure may result in damageor serious injury.

Meter Installation. After the meter fitting is installed inthe pipeline, the meter can be installed in the fitting. Pressthe meter into the fitting as far as it will go. Then retainthe meter in place by inserting the u-pin. This pincan be installed from either side. It is sometimes neces-sary to rotate the probe back and forth slightly to startthe pin into the slots on the probe. Slide the pin in as faras it will go.

Meter Connection. See the “TX80 Series Connections”diagram for meter connections. Unless the meter is sup-plied pre-connected to a meter-mounted FT420 flow in-dicator, three leads must be connected. These threeleads are color coded. The red wire is positive, the blackis negative, and the white wire is the signal lead.

Okay, if no air in pipe

Okay, if no sediment inpipe.

TX80 Series Connections

Red (+)White (SIG)Blac k (-)

BEST

2 of 4

10 5Diameters Diameters

K-factor. If the TX80 Series meter is ordered with itsfitting, the meter is factory calibrated in the fitting. A K-factor (meter factor) is indicated on the side of the fitting.This represents the actual number of pulses per gallonthe meter produced during the factory flow test. Thisnumber can entered into an FT420 or FT520 flow indi-cator to make it read properly. If a pulse divider is beingused, the K-factor is the starting point for calculating thedivider number.

These water meters are not recom-mended for installation downstream ofthe boiler feedwater pump where instal-lation fault may expose the meter toboiler pressure and temperature. Maxi-

mum recommended temperature is 130ºF (Plastic),200ºF (Metal).

!

Maintenance and Repair

Rotor Replacement. It is unusual for a rotor to requirereplacement due to damage sustained in normalservice. More commonly, the meter is dropped while itis out of the pipe. Another reason for rotor replacementis shaft wear after long service. Rotors are easily field-replaced. Shaft and rotor are not a single unit, if theyare using Kynar/ceramic. If replacement is due only tonormal shaft wear, bearing replacement is probablynot necessary. If the rotor has been damaged byimpact, the bearings should also be replaced. Rotorand bearings can be ordered as a kit, Part No.25930.To install a rotor, follow these steps:

1. Unscrew the threaded bearing housings to exposethe shaft ends. If bearings are being replaced, backthem completely out.

2. Remove the rotor. Put the new rotor in its place.

3. Thread in one bearing housing part way, then theother. Take care to start the end of the shaft into thebearing hole before tightening further.

4. Screw in bearing housings until they bottom. Note:Do not use excessive force.

5. Check for free spin. Blowing lightly on the rotorshould result in it spinning rapidly and coasting to asmooth stop.

Sensor Replacement. It is very unusual for a sensorto require replacement in normal use. The primary causeof sensor failure is overvoltage (inadvertent connectionof line voltage, for example) or incorrect polarity onhookup. The sensor is replaced by removing the strainrelief, then threading out the sensor retainer plug. Re-move the entire sensor capsule by pulling on the cable.The new sensor capsule can then be installed. It isimportant to orient the sensor capsule properly. Re-place the retainer plug, and then replace and tightenthe strain relief.

3 of 4

ediuGgnitoohselbuorT

melborP esuaCelbaborP kcehCoT riapeRoT

noitallatsniretfalangisoN wolftneiciffusnI ezisrofMPG.niMeeS scirteMaeStcatnoC

lortnocotsnoitcennocdaBscinortcele

.lortnoctasnoitcennockcehC,)-(kcalb,)+(der:ytiralopkcehC

)langis(etihwyrassecenfitcennoc-eR

lortnocelbitapmocnICDV42-6edivorp)1:lortnocseoD

gniknistnerructpecca)2;rewopstupni

scirteMaeStcatnoC

rotorgnissimrodegamaD yllausivkcehcdnaretemevomeRgninnipseerfrof ecalperdnarotorwenniatbO

gniretemetaruccanI neewtebepipthgiartshguonetoNecnabrutsidwolfdnaretem erusaem,snoitadnemmocereeS wolfmorfyawaretemevoM

etarbilacdleifroecnabrutsid

Part No. Description25930 Rotor repair kit(tungsten carbide)

25945 Rotor repair kit (ceramic)

25946 Rotor & shaft assy. (tungsten

carbide)

25947 Rotor & shaft assy. (ceramic)

11015 Sensor assy.

16439 O-Ring, Viton

16455 O-Ring, Viton

25081 O-Ring, EPDM

Spare Parts List

KYNAR is a registered trademark of Elf Atochem North America Inc.

20419 80th Ave. So., Kent WA. 98032 USAPhone: 253-872-0284 Fax: 253-872-0285www.seametrics.com 1-800-975-81534 of 4

gnitsiLstraP28,18XT

1 gnisuohreppU 18162

2 teksaG 11262

3 gnisuohrewoL 03992

4 wercsgnisuoH 92262

5 leets,gulP 37062

6 citsalp,gulP 97062

7 feilerniartS 5567

8 wercsgniniaterrosneS 12352

9 rosneS 01362

01 gnir-O 18052

11 )dradnats(ylbmessagniraeB 10952

21 )tfahscimareclanoitpo(wercstfahS 01761

31 )dradnats(rotorenibruT 64952

31 )21#htiwesu-lanoitpo(rotorenibruT 74952

41 pilc-U 72551

7

8

9

11

10

14

12

13

(Standard)

(Optional)

3

7

654

2

1

trahCytilibitapmoCsgnittiF

lairetaM 18XT 28XT

eznorB eeT"4-"1 gnittifezarB"8-"3

CVP eeT"2-"2/1 elddaS"8-"3

orpyloP A/N eeT"8-"3

leetssselniatS eeT"2-"2/1 gnittifdleW"8-"3

leetsnobraC eeT"2-"2/1 gnittifdleW"8-"3

FT420 Flow ComputerInstructions

The FT420 is a loop-powered microcontroller-basedtransmitter/indicator. It displays rate and total, and pro-vides a 4-20 mA analog signal proportional to flow. Aprogrammable pulse output, high flow or low flow alarmare also standard for metering pump control or datalogging.

The rugged cast-aluminum housing is gasketed for maxi-mum environmental protection, and the electronics arepotted into a solid block of urethane. A membrane key-pad allows settings to be changed without removing thecover. The wall mount version comes with brackets formounting. An adapter kit (part No. MK20) allows fieldmounting on 80-series flow sensors. The FT420 canalso be factory installed on a TX100/200 series sensoror WT meter.

SET

Features

Sturdy gasketed coverwith electronics

potted in

Removeable foot bracketsfor wall mounting

Large rate numerals

Easy set-upprompts Triple bosses for

watertight input/outputconnections

10.52341678.9

SET K RESET

Two wire4-20 mA output standard

SpecificationsGeneral Information

Power 4 mA DC (4-20 mA loop),12-32 VDC

DisplayRate 6-digit autorange, 1/2"

character heightTotal 8-digit, 5/16" character

height

Pulse Output • 0.1 second open collectorpulse (scaled)• high alarm or low alarm• sensor pulse (unscaled)

Input Pulse frequency + 5 VDCK factor Range 0.050 - 999999.9Pulse Output Range 0.1 - 200,000 units/pulseFlow Alarm Output Range

0.1 - 999999.99Temperature 0 C - 70 CEnvironmental NEMA 4X

LT-10605APage 1 of 4

012

3

456

RUN

BATT

CPU

POWER

CPU

7

OUTPUT 24VDCOUTPUT RELAY

A B

INPUT 4-20mA

A B

Installation

To mount the FT420 on a wall, hold the unit in the de-sired position, mark the holes in the mounting feet, drill,and mount with screws.

This unit can also be mounted directly on a flow sensorfor local reading. If the unit was ordered as an FT420,factory mounted to the top of a 100 or 200 Series flowsensor, no further installation is required.

To mount the unit on a flow sensor, remove the hous-ing cover. Place the lower half of the housing in thegroove on the top of the flow sensor. An adapter is in-cluded in the packaging of the FT420 which threadsinto the top of any 80-Series flow sensor. Pull the sen-sor wires through the hole in the center of this adapter,then thread the adapter into place. Tighten the adapterusing a screwdriver. (See diagram). Connect the wires,then replace the housing cover, orienting it any direc-tion as desired for viewing convenience.

Connection

To connect to the FT420 to a flow sensor, follow thediagram marked “Connections”. This diagram alsoshows the connections for an external device, suchas a chemical metering pump.

If the 4-20 mA current signal is not required, connectthe power terminals to any 12-30 VDC currentsource.

Programming

At a minimum, every FT420 must be programmed withthe “K-factor”. This is simply the number of pulses pergallon which the meter or flow sensor produces. (If youwish the FT420 to read in another unit, enter the num-ber of pulses per that unit. For example, if the desiredunits are liters, the K-factor is the number of pulses perliter that the flow sensor produces.)

To find the K-factor on any SeaMetrics flow sensor fit-ting or in-line meter, look on the model-serial label. Theline reading K = xxxx is the desired number. For adjust-able sensors (101,201,115,215) look in the instructionmanual under your pipe size.

Set K. Begin by pressing the key SET once. The promptSET K should appear on the display. The digit to the farright will be blinking. Use the up arrow key to reachyour desired digit. Then press the left arrow key to moveto the next digit. Repeat the process until the entirenumber is entered. (Note that the decimal is fixed atthree places. If you only have two decimal places foryour K-factor, enter a zero for the third digit.)

2 of 4

Typical 4-20 mA Application

!Caution: If output is being usedto control an external device, suchas a metering pump, do not con-nect the device until programmingis completed. If malfunction or in-

correct programming of the output could causepersonal injury or property damage, separatesafeguards must be installed to prevent such in-jury or damage.

powersupply

Chemical

FT420on TX81

Control Pulses

Flow

ProportionalChemical

Typical Chemical Metering PumpApplications

Loop power supply(if not providedon PLC)

Sensor Mount: Step 1 Sensor Mount: Step 2

Sensor Wires

Sensor Wires

3 of 4

Standard Connections

To OtherControl

Pulse ResponsiveMetering Pump

PU

LSE

SC

ALE

DP

ULS

EPA

SS

THR

U

-

+ -+12-30 VDC

Loop Power,4-20 mA Output

PO

WE

R4-20 m

A

RedWhiteBlack

SE

NS

OR

INP

UT

TX81Flow Sensor

Optional ChartRecorder or Other 4-20 mA Device

Operation

To return to normal operation after entering settings,press SET for a sixth time. The rate and total indicatornumbers should appear in the display. If the unit is con-nected to an operating flow sensor, the larger-sized dig-its indicate flow rate and the smaller-sized digitsindicate total.

Unless the unit has been ordered with the non-reset op-tion, a RESET prompt is constantly visible in the lowerright corner, above the up arrow key. Press this key atany time to reset the totalizer to zero.

Set P. The second time the SET key is pressed, SET Pwill appear. Follow the same process as above to enterthe desired pulse rate. This is the number of gallons (orother units, if you are using them) between pulses. Note:If the pulse output feature is not being used, thisstep can be skipped. The P (pulse output) settingdoes not affect anything if it is not being used.

Special Function: Flow Alarm. If a flow alarm isneeded, pressing all three buttons at once willbring up the appropriate settings while Set P isshowing. Pressing the up arrow key changes fromP (pulse output) to AL HI (high flow alarm). Pressthe up arrow key again changes to AL LO (lowflow alarm). Press the SET key to set the alarmrate. Use the up arrow and left arrow as above toreach the desired digits. Note: Using flow ratealarms eliminates the pulse output function.

Set 20 mA. Press the SET key the third time, to set theflow rate, in units per time unit, at which 20 mA is de-sired. The processor will automatically scale the 4-20mA loop accordingly, with 4 mA at zero flow.

Set Decimal Point. The fourth time the SET key ispressed, a D prompt appears. Pressing the up arrowkey switches between no decimal place, one decimalplace or two decimal places.

DimensionsFT420

Sensor-MountFT420

with Wall Mount Brackets

20419 80th Ave. So., Kent, WA 98032 USAPhone: 253-872-0284 Fax: 253-872-0285www.seametrics.com 1-800-975-8153 4 of 4

2.78"

2.57"

SET

3.93"

4.52"

3.93"

2.06"2341678.910.5

SET

SECMINHRDAY

10.52341678.9

RESET

Set Time Unit. The fifth time the SET key is pressed, ablinking time unit appears. Press the up arrow keyto select SEC (seconds), MIN (minutes), HR (hours) orDAY (days).



Submitted To:



Submittal Details:

Date Submitted: 3/30/2006 Date Resubmitted: Specification Section: 15900.2.15 Description: Variable Frequency Drives Model: VLT-6000

Supplier info:

Name: Olympic International Agencies Ltd. Address: 344 Harbour Ave, North Vancouver, BC V7J 2E9

Manufacturer info: Name: Danfoss Address: 8800 W. Bradley Road Milwaukee, WI 53224-9541 Website www.grahamdrives.com


Project: Malaspina College

Contractor: Houle Electric Limited

Customer P.O. TBA Olympic Ref. HP

2- Danfoss Model VLT6000 -575/3/60 - NEMA 3R Enclosure - 5% input line reactor - Input DC Link Reactors - 3 Contactor Manual Bypass - Disconnect - Fuses on drive and bypass - Drive fuses are Semi-conductor rated - 3 year drive warranty

1@ 20 HP 575/3/601@ 40 HP 575/3/60

1 October 2005

600 Volt Qty. Tag Numbers Model VLT Type Nominal

Voltage Max. Amps Output Motor(s) Horsepower/kW

SIDE-BY-SIDE BYPASS and FUSED/DISCONNECT 1 20 HP VLT6000J22 6022 600 22 20 1 40 HP VLT6000J41 6042 600 41 40

Drive Input Power

Input voltage, 3 phase ............................................. 600 VAC

Input voltage range for full output ............................Nominal ±10%

Undervoltage trip point ............................................394 VAC

Overvoltage trip point ..............................................690 VAC

Input frequency........................................................60 Hz, ± 2 Hz

Displacement Power factor......................................0.98 or greater at full load and nominal motor speed

Drive Output Power

Output frequency .....................................................Selectable 0 to 120 Hz

Motor voltages .........................................................575 VAC

Continuous output current .......................................100% rated current

Output current limit setting.......................................Adjustable to 110% of drive rating

Current limit timer ....................................................0 to 60 seconds or infinite

Adjustable maximum speed ....................................From minimum speed setting to 120 Hz

Adjustable minimum speed .....................................From maximum speed setting to 0 Hz

Acceleration time .....................................................To 3,600 seconds to base speed

Deceleration time.....................................................To 3,600 seconds from base speed

Breakaway torque time............................................0.0 to 0.5 seconds (1.6 times motor nameplate current)

Start voltage.............................................................0 to 10%

DC braking time.......................................................0 to 60 seconds

DC braking start.......................................................0 to maximum frequency

DC braking current ..................................................0 to 50% of rated motor current

Control Connections

Follower signal.........................................................0 to 5 V DC, 1 to 5 V DC, 0 to 10 V DC, 2 to 10 V DC, 0 to 20 mA, 4 to 20 mA, direct and inverse acting

Number of programmable digital inputs ..................8

Number of programmable analog inputs .................3; 2 voltage, 1 current

Analog input voltage, current ratings.......................0 to 5 V DC, 1 to 5 V DC, 0 to 10 V DC, 2 to 10 V DC, 0 to 20 mA, 4 to 20 mA, direct and inverse acting

Number of programmable analog outputs...............2

Number of programmable relay outputs..................(1) standard Form A 30 V AC, 1 A, (1) standard Form 240 V AC, 2 A, (1) or (4) additional optional

Auxiliary voltage.......................................................+24 V DC, maximum 200 mA

2 October 2005

Software

Lost speed reference action ....................................Selectable to go to a preset speed, go to maximum speed, stay at last speed, stop, turn off, or stop and trip

Time delay for lost speed reference action .............1 to 99 seconds

Adjustable auto restart time delay ...........................0 to 600 seconds

Automatic restart attempts.......................................0 to 20 or infinite

Automatic restart time delay ....................................0 to 600 seconds between each attempt

Relay ON delay and relay OFF delay......................0 to 600 seconds

Maximum number of preset speeds ........................16

Maximum number of frequency stepovers ..............4

Maximum stepover width.........................................100 Hz

Maximum number of accel rates .............................4

Maximum number of decel rates .............................4

Delayed Start ...........................................................0 to 120 seconds

Environmental limits:

Efficiency .................................................................97% or greater at full load and nominal motor speed

Ambient operating temperature...............................14°F to 104°F (-10°C to 40°C)

Humidity .................................................................< 95%, non-condensing

Altitude: maximum without derating.........................3,300 ft. (1,000 m)

Drive and options enclosure(s)................................NEMA Types 3R

Protections:

Low frequency and high frequency warnings..........0 to 120 Hz

Low current and high current warnings ...................0 to maximum current

Low reference and high reference warnings ...........-999,999 to 999,999

Low feedback and high feedback warnings ............-999,999 to 999,999

Ground fault .............................................................Protected

Motor stall ................................................................Protected

Motor overtemperature ............................................Protected (Predictive motor temperature)

Motor Condensation ................................................Protected (Motor pre-heat circuit)

Agency listing:

All drives and option packages are factory-built and carry UL and C-UL listings.

All drives and option packages are built in ISO 9000 and 14001 certified facilities.

3 October 2005

DRIVE FEATURES - OPERATOR INTERFACE

THE VLT®6000 DRIVE The VLT 6000 Series microprocessor-based, high frequency IGBT-based, PWM AC drive has control functions and software designed solely for the unique needs of HVAC systems. The VLT 6000 drive uses state-of-the-art Voltage Vector Control to supply full-rated motor voltage at rated load and frequency, full motor performance without derating, high efficiency for both drive and motor, and a nearly perfect output sine wave. The diode-bridge rectifier and DC link reactor provide a high displacement power factor at all speeds and loads and minimize power line harmonics. The VLT 6000 drive utilizes a common user interface with a four-line alphanumeric display and a quick setup feature to allow fast, easy installation.

4-Line, 68-Character, Multilingual Alphanumeric Display The VLT 6000 drive uses a large, bright, back-lit liquid crystal display (LCD) to provide complete drive information at a glance. The logical arrangement of all elements simplifies the setup, operation and monitoring of the drive. Choose from 25 different items to display, including input reference, motor current, hours run, output frequency, horsepower, kW or kWh. Or select from custom units, such as GPM or HP and calibrate the maximum value to the maximum frequency of the unit. After programming one drive, the keypad can be used to transfer the same settings to all other drives. Drive can run without the keypad in place to assure tamper-proof operation. Drive status is shown even with the keypad removed.

First Line - 20 Characters Displays up to three measurements (volts, amps, kW, etc.) continuously in normal operating status or the title of the meter shown on the second display line.

Second Line - 8 Characters Continuously shows a measurement (volts, amps, kW, etc.) with relation to the unit, regardless of status (except in the case of alarm/warning).

Third Line - 20 Characters For use in the menu mode to show the selected parameter group, parameter number and name.

Fourth Line - 20 Characters Displays the status (Local, Remote, Run OK, etc.) when in operation or the mode or value of the selected parameter when in the change mode.

LED Indication Three LEDs are provided on the VLT 6000 drive for indication of power applied, warning and fault. Upon power up, all LEDs will briefly light as a lamp test. Alarm - Will flash red when the drive has registered a fault condition which has caused the drive to shut down. Warning - Will flash yellow to indicate a situation exists that exceeds the normal drive/system parameters, and if that condition continues, a trip may be imminent. On - Will glow green to indicate that the VFD is connected to AC power (line voltage is present).

4 October 2005

Operating Keys Hand/Start - Starts the drive regardless of remote start/stop contact (assuming safety interlock is closed). The

speed of the drive will generally be controlled manually via the keypad "+" and "-" buttons. Off/Stop - Shuts drive down regardless of other commands. Auto/Start - Drive will start and stop via the external contact closure (building automation time clock). The speed

is generally controlled via the building automation signal (4 to 20 mA, 0 to 10 V DC, etc.). Reset - Will reset any trip level fault (not trip lock) if the drive is not set for infinite automatic fault resets.

Directional Keys “+/-” - Used as the electronic potentiometer to manually control the speed in the Hand/Start mode. All four keys are active during operation as well as programming. They provide the ability to move the cursor

around the LCD display, or sequence through display values.

Programming Keys Change Data - Used to change the data value of a parameter when programming the drive. Cancel - Used to cancel the last programming command so the change is not carried out. OK - Used to confirm that the last programming change should be saved to memory. Display Mode - Used to select the mode of display and to change from any programming mode back to the

display mode. Quick Menu - Used for programming the VLT 6000 drive using the 12 parameters in the quick setup menu. Can

switch directly between extended menu mode and quick menu mode. Extended Menu - Used to access all parameters for programming. It can switch directly from this mode to quick

menu. PROGRAM OPTIONS

Setup - Application specific The VLT 6000 drive was designed specifically for the HVAC market. This specialization has allowed Danfoss Graham to factory program and configure the VLT 6000 drive to make it ready to use out of the box. This eliminates the time consuming and often confusing job of selecting the right parameters in the field. For the advanced user, the parameters are logically grouped making modifications simple. Customized text (2 lines, 20 characters-first line, 8 characters-second line) can be programmed into the drive using the EIA-485 port.

Quick Menu - Contains the 12 required setup parameters to easily start the application.

Extended Menu – Used to access all parameters for programming. It can switch directly form this mode to quick menu.

Programmable Analog and Digital Inputs and Outputs Three analog (2 voltage, 1 current) and eight digital inputs along with two analog and two relay (1 Form A 30 V AC, 1 A; 1 Form C 240 V AC, 2 A) outputs, all programmable, are standard on the VLT 6000 drive.

5 October 2005

DRIVE FEATURES - MOTOR AND DRIVE INTERACTION Constant Torque Start The VLT 6000 drive provides a constant-torque start mode to provide full torque to accelerate different loads until the drive reaches the set point. Breakaway current can be set up to 160% for up to 0.5 seconds for starting high friction loads Current limit circuit Adjustable from 0 to 110% of the VLT 6000 drive's rated current (factory set at 110%). If during acceleration the current required to accelerate the load exceeds the current limit, the VLT 6000 drive will stop accelerating until the motor current is reduced to normal levels, at which time the load will continue to accelerate at the rate set by the acceleration time. Three phase output current measurement The VLT 6000 drive’s sophisticated software measures output current on all three phases. Phase grounding is instantly detected. Output contactors may be repeatedly used with no damage to the drive. Multiple motors may be run from one drive. Advanced motor protection The VLT 6000 drive features integrated electronic, thermal motor protection. The VFD calculates the motor temperature based on current, frequency, and time. This system allows for changing cooling conditions as speed and load vary. The drive can predict motor over-heating and reports a % of thermal load. Motor Pre-heat circuit This pre-heat function can be activated to avoid condensation on the motor windings when it is stopped. Stall Protection The VLT 6000 drive provides protection against a stalled motor. When activated, this function can provide a warning or a fault condition caused by excessive motor current at low speeds. DRIVE FEATURES DC Link Reactor A dual, 5% DC link reactor on the positive and negative rails of the DC bus is standard equipment on the VLT 6000 drive. This reactor reduces the level of harmonics reflected back into the building power system without causing a voltage loss at the drives input and reducing efficiency as an external AC line reactor would. This reactor also improves input power factor. The reactor is non-saturating (linear) to provide full harmonic filtering throughout the entire load range. In performance, the DC link reactor is equivalent to a 5% AC line reactor Power Line Protection Power line voltage surge protection is provided by means of input Metal Oxide Varistors (MOVs). This protects the diodes in the VLT 6000 drive’s 3-phase full wave diode bridge. The DC link reactor also acts to reduce input current caused by power line disturbances. Sleep Mode Automatically stops the drive when speed drops below set "sleep" level for specified time. Automatically restarts when speed command exceeds set "wake" level. Saves energy and reduces wear on driven equipment. Run Permissive Circuit Ability to accept a "system ready" signal assures that dampers or other auxiliary equipment are in the proper state for drive operation. This feature also provides the ability for the drive to send a “start signal applied” signal to the system to notify the auxiliary equipment of the drive’s request to start. Firefighter’s Override Mode Overrides all other commands to provide desired operation. Ignores most alarms including over load, over current, over temperature, phase loss. When used with bypass, selectable to run from drive, from bypass, or switch from drive to bypass in the event of a drive failure. Acceleration / Deceleration Rates The VLT 6000 drive can provide four individually controlled sets of acceleration/deceleration rates each from 1 to

6 October 2005

3600 seconds. The shape of these curves may be automatically contoured to prevent tripping. Plenum Rated The VLT 6000 NEMA 1 or NEMA 12 drive is recognized by UL for installation in air handling compartments. Auto Restarts The VLT 6000 drive can be automatically restarted up to 20 times or infinitely at 0 to 600 second intervals. If the application causes the drive to trip more than the number of trials set, the drive will stop operating and display the fault on the display screen. A manual reset will be required by means of the reset key, a digital input, or EIA-485 command. In cases of severe trips, as a safety feature, the drive's input power may have to be cycled to restart a fault. Carrier Frequency By using IGBTs, the VLT 6000 drive can employ high switching frequencies, so the motor current is practically sinusoidal. Audible motor noise can also be minimized by adjusting the switching frequency. These frequencies can be set or adjust themselves automatically to fit the application. Input Power

The VLT 6000 drive is equipped with an automatic sustained power or phase loss circuit. The VLT 6000 drive will provide a full rated output with an input voltage as low as 90% of the nominal. The drive will continue to operate with reduced output with an input voltage as low as 164 volts for 208/230 volt units, 313 volts for 460 volt units, and 394 volts for 600 volt units. Automatic Motor Adaptation (AMA) Knowing motor stator resistance, the drive automatically optimizes performance and efficiency. The motor does not have to be run or decoupled from the load for the AMA setup to be performed. Critical Frequency Lockouts For applications where it may be necessary to avoid specific frequencies due to mechanical resonance problems in the driven equipment, the VLT 6000 drive, with its Critical Frequency Lockout Function, makes it possible to set up to four different frequency ranges which will be avoided during operation of the drive.

• Each critical frequency setting can avoid a frequency band which is from 1 to 100 Hz wide. If the

reference signal defines that the VLT 6000 drive is to operate within this critical frequency range, the critical frequency lockout function will keep the drive operating continuously within this range.

• When the frequency reference signal rises above the critical frequency maximum limit, the VLT 6000 drive will allow the motor to accelerate through the critical frequency at the rate set by the acceleration rate.

Automatic Energy Optimization Circuitry The Automatic Energy Optimization (AEO) function adapts the output of the drive to the specific motor and load connected. This circuit optimizes the system efficiency as system loads change. The AEO function regulates the output voltage on the basis of the reactive current and the effective current. A savings of 3 to 10% in power consumption can be obtained with this function. Preset Speeds The VLT 6000 drive allows for a maximum of sixteen programmable preset speeds to be selected from the digital inputs. Proportional Integral Derivative (PID) Setpoint Controller The VLT 6000 drive is equipped with an internal PID Controller. This controller can be used to control pumping, or ventilation applications. The drive uses four inputs. Two set point signals which indicate the desired value of a process variable and two feedbacks of the actual value of the process variable. This could be pressure, flow, temperature, CO2 level, or anything that can be metered in the HVAC environment.

• Proportional: The proportional gain dictates the rate at which the deviation between actual and desired feedback signal is corrected. The higher the gain, the faster the response, but too high a gain can cause hunting and a large overshoot.

• Integral Time: The integral time continually compares the feedback value with the desired set point over time

7 October 2005

to make sure the setpoint is reached. The greater the integral time, the longer it takes to actually achieve the set point, but improves the system stability.

• Derivative: The derivative function monitors the rate at which the feedback is closing on the desired setpoint and slows the rate of approach to prevent overshooting. This function allows rapid accurate system control.

Built-in Communications The VLT 6000 drive is fully equipped for serial communication (EIA-485). Up to 31 drives can be connected to one serial bus up to 5,000 feet long.

Communicates directly with Johnson Controls Metasys (N2), Landis & Staefa System 600 (FLN), and Modbus RTU systems with no hardware changes or additional costs. Broken Belt, Loss of load A minimum motor current value can be set to indicate the motor is not using any more current than to run at idle. This can be used to indicate a broken belt or coupler. This feature can also be used to detect when a motor is disconnected from the drive. WARRANTY

The VLT 6000 drive carries a 36-month on-site warranty from the date of shipment. This warranty includes parts, labor, travel, and expenses.

VLT® 6000 DRIVE OPTIONAL FEATURES Bypass Enclosure

Drive options:

Interlocked Three-contactor Bypass Common Run/Stop Input Disconnect Switch

This bypass consists of a bypass contactor interlocked with a drive output contactor, a drive input contactor, an overload relay and the associated logic circuitry mounted and wired in the auxiliary enclosure. An enclosure mounted drive/off/line/test switch is used to electrically select whether the motor is driven by the drive, the line, or disconnected from both. The input contactor disconnects power automatically when in the "off" and "line" modes.

Includes drive fuses. Requires input fuses. Common run/stop will allow remote run/stop in either drive or bypass mode if specified.

Fusing Input Drive Input fusing fuses the entire panel from the line; drive fusing fuses the drive from the line. .

hporritt

Text Box

20 HP

hporritt

Text Box

40 HP

Documents

Shop drawing submittal cover sheets 250 design build 2007 ddc... · 3/29/2006 Level 1 VAV Valve L/s GPM PD Type Return Fail Design CV Actual CV Size Model Actuator 1 VAV-101 0.12