Upload
howard-chau
View
771
Download
16
Embed Size (px)
Citation preview
2008/2009 Shop practiceS ManualThe 2008/2009 Shop Practices Manual is published by Salomon for Salomon Authorized Alpine Binding Dealers. This manual provides current technical information, certification requirements, and indem-nification information. Please keep a copy of this Manual on hand as a quick, easy, and reliable refer-ence for servicing Salomon alpine bindings. Because the content of the Manual changes every year, you should keep previous editions available as refer-ences for servicing older products. Your Salomon Certification Web site will one day provide a resource of archived material for your reference as well.
Salomon continues to be the number one winter sports brand worldwide. Our goal is to advance our breakthrough technologies featuring innovation in safety and performance binding systems.
Binding 1Alpine Binding Liability Indemnification 4
Binding Quick Reference Chart 6
retail Binding SySteMS 7Preparation 7
Installation 8
Binding-to-Boot Adjustments 13
Release Value Selection & Adjustment 14
Final Checking & Visual Inspection 16
Mechanical Inspection 17
Skier Instruction, Warning & Record Keeping 19
rental & deMo Binding SySteMS 21Preparation 21
Installation 22
Binding-to-Boot AdJustments 23
Release Value Selection & Adjustment 24
Rental Visual & Mechanical Inspection 24
Skier Instruction, Warning & Record Keeping 28
Binding Maintenance & repair 31Maintenance & Repair 31
certification prograM 33Technician Certification Exam 33
Ski/SnowBlade 37Technical Features 38
Snowblade 42
Maintenance & Repairs 44
Boot 48Standard Boot Norms 49
Technical Features 49
Salomon Foot Measurer 50
Advanced Fit Technology Liner 51
Custom Shell technology 53
Salomon Boot Technologies 54
Boot Concepts 55
Foot anatomy and fit 59
helMet & pole 62Helmet Technology 63
Pole Technonolgy 65
Spare partS 66
warranty 81
contentS
IntroductIon > 2
2008/2009 certification prograM
authorized alpine dealer requirementsWhile it is not necessary for an Authorized Location to have all of its personnel certified, sales people and managers are encouraged to remain aware of Salomon’s certification and record keeping requirements.
• SalomonAuthorizedAlpineBindingDealersmusthaveatleastoneSalomon Certified Technician working at each Authorized Location sell-ing, servicing or renting Salomon alpine bindings.
• ThetechnicianwhosignstheAuthorizedLocation’sworkshoporrentalform for any transaction must be currently Salomon alpine binding cer-tified.
• ItisanAuthorizedDealer’sresponsibilitytomaintainsufficientrecordsto identify its Certified Technicians.
Salomon provides its Authorized Alpine Binding Dealers with information contained in this publication:
1. To help assure skiers that Salomon alpine bindings are properly selected, mounted, adjusted, and serviced.
2. To serve as a risk management tool for the Authorized Dealer.
certification feesAuthorized Alpine Binding Dealers will be invoiced an administrative reg-istration fee for technician certifications.
u.S. dealers• FortheU.S.,a$12feewillbeinvoicedforeachRegistrationandExam
submitted on line at www.salomoncertification.com
• TheU.S.feeis$20foreachRegistration/ExamsubmittedbymailorfaxtoSalomon,orfortechnicianscertifiedbyanyapprovedindustrytraining program.
Fax:(801) 334-4502 Salomon Certification/Customer Service SalomonU.S.A. 2030 Lincoln Ave. Ogden,UT84401
canadian dealers• ForCanada,a$30.00feewillbeinvoicedforeachCertificationKitsenttothedealer.TechniciansmustRegisterandtaketheExamon-lineatwww.salomonhookup.ca
2008/2009 certification kit
This manual forms part of a kit which is available each year to Salomon Authorized Binding Dealers. Enclosed in the kit you will find the neces-sary materials to certify your shop technicians for mounting and adjusting Salomon Bindings for the 2008-2009 season. This packet should have the following items:
•2008-2009SalomonShopPracticesManual&SpareParts•2008-2009SalomonShopPracticesCD(instructionalvideo&manuals)•BootSoleLengthSticker•SkierClassificationChart•VisualIndicatorAdjustmentChart•ToeHeightAdjustmentCard
If this packet is missing any of these items, or you need any more, please contact Salomon Customer Service at 1 (800) 654-2668(intheU.S.)or1 (800) 361-3398 (in Canada).
electronic documentationAn electronic version of the 2008-2009 Shop Practices Manual is availablebothonthemediaCDincludedwiththisCertificationKitas well as online at www.salomoncertification.com(intheU.S.)orwww.salomonhookup.ca(inCanada).ThemediaCDPDFversionofthemanual is identical to the printed copy included in this kit, with the added convenienceofafullyhyperlinkedtableofcontentsandreferenceboxesforeasynavigation.TheonlinePDFversionoftheSalomonShopPracticesManual is continuously updated with the most current technical language and thus may have additions not appearing in the print version of the Salomon SPM. The printed version of the Salomon SPM is still completely valid and all procedures described within follow industry standards.
Media cd!The training video comes on a cross-platform CD-ROM (Windows,Mac&Linux)alongwithafullyindexedPDFof the Shop Practices Manual and several forms for convenient access, duplication and printing.
To view the videos you’ll need a computer with any web browser with the Quicktime plug-in installed (if it is not already installed, your browser will provide a link to easily obtain the free software). In addition, to view the Shop Practices document and open the other forms you’ll need a pdf document reader such as the free adobe reader (available at http://www.adobe.com/products/acrobat/readstep2.html)
Insert the CD into a computer, navigate to the top-level of the CD-ROM and dou-ble-click the “welcoMe-BienVenue.html” file – this should open the file in your internet web browser. Alternately, with the disk in the computer, you can launch a newinternetbrowserwindow,choose“Open”fromthe“File”menuofthebrows-er and navigating to location of the file on the CD-ROM.
Binding
2008/2009 Salomon certified technician certification process
Only a technician sponsored by a Salomon Authorized Alpine Binding Dealer may be certified. Authorized Dealers can log onto www.salomoncertification.com(intheU.S.)orwww.salomonhookup.ca(inCanada)toreceiveacurrentlistoftheirSalomonCertified Technicians. To complete the technician certification process:
1. Read this manual and become familiar with required Salomon shop practices.AcorrespondingCDisavailabletoassistinthisprocess.Fora copy of the CD, contact your Salomon sales or Customer Satisfaction Representative.
2. Be familiar with earlier editions of Salomon Shop Practices Manuals andSalomonTechnicalUpdates.
3.BefamiliarwithSalomonbindingsthroughhands-onexperience.
4.FortheU.S.,logontowww.salomoncertification.com.ForCanada,log on to www.salomonhookup.ca. Complete the on-line 2008/2009 SalomonCertifiedTechnicianRegistrationandExamandreceiveconfir-mation of your certification instantly.
2008/2009 certification prograM continued
1. log onto the certification website•IntheU.S.logontowww.salomoncertification.com •In Canada log onto www.salomonhookup.ca (There is a specific pro-
cess to follow when certifying groups of 10 or more canadian techni-cians at the same time. Please contact Salomon Customer Service for details).
2. register your information •Onceyouhavesignedin,youwillgetapromptaskingyoutoconfirm
your login-ID. Write this information down in case you need to stop your test in the middle and return later.
3. take the on-line exam •Oncethetestbegins,do not use your web browser to move “back”
or “forward”. Doing this will result in a cancelled session and you will need to start at the beginning.
•Ascoreof90%,or20correctanswers,mustbeobtainedtopass.•Inaddition,questions3to7,10,11,and13to17areconsideredcore
questions and must be answered correctly.
4. once you pass the test •IntheU.S.clickonthebuttontocreateaprintablecertificate.(The
certificate will be created in Acrobat. If you do not have Acrobat Reader on your computer, click on the icon, and you can download it free from the web.) or Write down your certificate number and return latertoretrieveyourprintablecertificate.Aninvoicefor$12willbegenerated and sent to your shop. If you do not pass, your shop will notbeinvoiced.Onlypassingexamswillreceivecertificatenumbersand generate an invoice.
•InCanada,clickontheDownloadCertificateboxtocreateaprint-able certificate. (The certificate will be created in Acrobat. If you do not have Acrobat Reader on your computer, click on the icon and you can download it free from the web.) or click on e-mail Certificate to receive an e-mail version.
instructions for taking the on-line examOnceyouhavebecomefamiliarwiththeproceduresformounting,adjusting,andtestingSalomonbindings,taketheexamon-lineforinstantresultsand obtain your certificate immediately. (If for some reason you are unable to take the test on line, please contact your Salomon sales representative.) Just follow these easy steps:
1. Simply log onto the site and click on the button “Search for certified technicians”.
2. Enter your shop ship-to code or certificate number to search the certi-fication database.
3. You may retrieve printable certificates from the database for any certi-fied tech.
4. If you need to know who in your shop is certified, log on and search for certified technicians for your shop. An updated list will appear so you have constant access to the information.
finding currently certified technicians for your Shop
• Techniciancertificationisvalidfortwoyearsfromtheexamdate(un-less Salomon provides further notice).
• TechniciancertificationisnotvalidatalocationthatisnotaSalomonAuthorized Alpine Binding Location.
• TechniciancertificationmaybetransferredfromoneSalomonAuthorized Alpine Binding Dealer to another by contacting the certifi-cationcoordinatorbymailortelephone(Ogden,UTforU.S.dealersand Concord for Canadian dealers).
technician certification Validity period and transfer
Binding
IndemnIfIcatIon > 4
alpine Binding liaBility indeMnification
Salomon alpine binding indemnification applies to the 2008/2009 Retail Binding Line, 2008/2009 Rental Binding Line, Non-current Retail Binding Line and Non-current Rental Binding Line models listed below. Indemnification does not apply to older non-indemnified binding models.non-indemnified Bindings
Older models of Salomon bindings no longer on the Schedule of Indemnified Bindings may still be serviced, however Liability Indemnification will not be offered by Salomon for these models of bind ings. Dealers wishing to service these models of bindings can reduce their liability risk by requiring an additionalwaiverandreleaseagreementandattachingittotheWorkshopForm.Suchwaiversshouldbereviewedbyadealer’sownlegalcounseltoensure compliance with applicable laws.
Salomon bindings are not designed or tested for use with Mono Boards, therefore bindings mounted on Monoboards will not be indemnified.
2008/2009Z12 Ti Smartrak
ControlZ10 Smartrak ControlSTH 16STH 14 DriverSTH 14STH 12Z14Z12 TiZ 10Z 10 Ti WomenZ10Fis20LZ 8LZ7711710SmartrakGrip610TZ 5
non currentC610 CpC610C609 Ti C609 D+ C609C608FIS17C608 CpC608C607C509 Dr+C509
C305 / C305 MINIDriver Suspension 997Equipe
Driver Suspension 997Carbon
Driver997EquipeDriver997Carbon997Equipe/Carbon997EXP977Force977Team977Composite977Z 920 LabZ 916 LabZ 914 LabS914Axe+S914 LabS914FIS26.3/20/17S914FISS914 Pe2
S914S914FISPilotS914 PilotS914 Pe914F1S20914FIS914S912 Ti Pe2
S912FISS912FIS24S912 TiS912 Ps
S912FISPilotS912 Ti PilotS912 Ti SC PilotS912 Ti PeS912 PeS912S910TFIS
26,3/24/20S910 T PsS910FIS24S910 TS910S910 T PsS910TAxe+SP900 Equipe SP900 Equipe Alium SP900 Alium S900 Equipe Team
RaceS900 Equipe Team
Drive PlusS900 Equipe Team Axe+
S900 Equipe TeamS900 Equipe Race S900 Equipe Poweraxe
S900 Equipe Drive Plus
S900EquipeAxe+S900 Equipe Alium Poweraxe
S900 Equipe Alium Drive Plus
S900 Equipe Alium Axe+
S900 Equipe Alium S900 Equipe S900 Carbon Poweraxe
S900 Carbon Drive Plus
S900CarbonAxe+S900 Carbon S900 Ti S900 Alium S900 Driver Suspension 897Composite
Driver Suspension 897
Driver897Composite897Equipe877Equipe877SP850 S850X-MountainS850PoweraxeS850 Alium X-Mountain
S850 Carve w/Ramp Plus
S850 CarveS850Axe+S850
S812 PaS811 PSS810 TiS810TiAxe+S810 CpS810 PsS810S810 Ti PilotS810 PilotS810 Ti SC PilotS810 Ti PsS810Axe+Quadrax800CarbonQuadrax800SP800 S800PoweraxeS800 Drive PlusS800 AliumS800 797CompositeDriver797Composite797777777LadyS711PsS711PaS711CpS710CpS710TiS710S710PilotS710SCPilotS710TiPilot
S710TiCp2
S710PaS710DPS710CP2
S710Axe+710S708TAxe+Quadrax700S700TeamPoweraxeS700TeamS700Axe+S700677C610 CP2
610 CP 609 D+609 S608 CPC608 CP2 608 607Q600PoweraxeQ600Quadrax600577C509 D+Q500C407GromQuadrax400Q400S305GROMC305GROMC305MINIGROM
305Quadrax300Q300S300Driver197Equipe
Junior197EquipeJunior177EquipeJunior177Z10TiAxe+Z10 Ti Z10FIS20Suspension DR9
Equipe SuspensionDR9EXPQuadrax8CarbonQuadrax8Suspension DR8
CompositeQuadrax7Quadrax6Quadrax6LadyQuadrax5.5Quadrax5Quadrax3Quadrax3MiniQuadraxTeamTeam JuniorTeamForceJuniorForceExtremeCarve
retail Binding line
Schedule of indemnified bindings
rental Binding line
2008/2009KRRZ12TiKRRZ12KRRZ10KRR711KRRTZ5SCZ12 SC Z10 SC LZ 8 SC711SCLZ7SR609 SC609 SRTZ 5 SRTZ 5 SCTZ 5 SC Junior Track
non currentDriver Suspension 997EquipeSR
Driver997EquipeSCDriver997EquipeSR997EquipeSC997EquipeSR977EquipeDemo977DemoN 920 Equipe RaceN 916 Equipe Comp.S912 Ti SCS912 Ti Pe2 DemoS912 Ti Pe DemoS912 Ti SRSP900 Equipe Test
S900 Equipe SR Drive Plus
S900 Equipe SRS900 Equipe SC
Drive PlusS900 Equipe SCSP850 Test 877SCS850 SR Drive PlusS850 SC Drive PlusS850 SCS810 Ti SCS810 SRS810 SCS800 SRDriver797SC
797SC777SR712e2
CosmicS712SCS711SRS711SC710e2
710SCCosmicS710SRCosmicS710SCCosmicS710S708TSRQ700SCS700TeamSRS700SRS700SCDrivePlus
S700SCST610 e2
C609 SCC608 SRC608 SC608 SC C607SCC607SR607SRC509 SRC509 SCQ500 SC Drive PlusQ500 SCQ500 SR477RR477LR
Snowtrip ST 410C407GromSRQ400 SRC305 SRS305GromSC305 SC305 SRQ300 SCQ300 SRS300 SCS305 SCC305GromSR177TeamSR177RRZ12 Ti SmartrakZ12 Ti Smartrak Control
Z12 Ti SC Z10 Ti SC Z10 SmartrakQuadrax7SCQuadrax7SRQuadrax6SCQuadrax5SRQuadrax5RRQ5 SRQuadrax3RRQuadrax3SCQuadrax3SRQuadrax3Q3 SCQ3 SRForceSR
Need to add 2008-2009
modekls to this chart
move appropriate models
to “non-current”
remove models no longer
indemnified
Chart on page 5 is based
on canadian hardgoods
workbook. Please make
sure there are no missing
models being marketed
intheU.S.
No models were cut from
the “non current” list
(it had been discussed
whether to drop models
endingin77…
Binding
IndemnIfIcatIon > 5
alpine Binding liaBility indeMnification continued
SalomonoffersliabilityindemnificationtoSalomonAuthorizedDealers.Salomonwilltotheextentandwithin the limits that insurance coverage is available defend and indemnify a Salomon Authorized Alpine Binding Dealer against liabilities from claims presented by any customer of the Authorized Dealer arising solely from the use of Salomon alpine bindings, provided:
A. The dealer purchased the alpine bindings from Salomon.B. The dealer has received written notice of a claim involving alpine bind-
ings.C. The claim alleges use of the alpine bindings resulted in injury.D. All Salomon recommendations, procedures and policies in effect at the
time of the incident were followed, including, but not limited to, those contained in the Salomon Shop Practices Manual, Salomon Technical Update(ifapplicable),SalomonPurchaserPoliciesandSalomonGeneralTerms&Conditions.
E. The Certified Technician is of legal age.F. Thedealerusesworkshopand/orrentalformsthesameas,orequiva-
lent to, Salomon forms with currently approved Liability Release Language.
G. ThedealermaintainsproperandcompleterecordsforallSalomonbindings mounted and/or adjusted for a period of two years or the statute of limitations of the state or province, whichever is longer.
H. The dealer provides written documentation of the technician’s employ-ment and training (e.g., method of training, proof of certification, etc.).
I. A copy of the properly completed workshop form or rental form, in-cluding a signed release, is submitted.
J. A properly completed Post Accident Ski Equipment Inspection Report, thesameasorequivalenttotheexemplaryformdisplayedinthismanual, is submitted.
K. AnyotherhelpfulinformationsuchasaSkiPatrolIncidentReportFormissubmitted.
L. The dealer notifies Salomon in writing within ten days of the date on which the dealer first receives written notice of the claim.
M. The dealer cooperates fully in the investigation, litigation and/or settle-ment of the claim.
Salomon may terminate indemnification, with respect to Salomon al-pine bindings, upon providing written notice to the dealer.
1. Useyourbesteffortstodeterminetheexactnatureanddetailsoftheclaim.
2. Avoidexpressingopinionsconcerningtheclaim.Youmay,totheextentthatyouhavecompliedwithallrecommendedprocedures,indicate to the claimant or the claimant’s representative that recom-mended procedures for service and adjustment of the equipment were followed.
3. Notify your insurance company. Salomon indemnification is not a sub-stitute for liability insurance.
4. GatherallinformationanddocumentsrequiredbySalomonlistedinthe Liability Indemnification section for that specific product and send the documents with a brief description of the incident to:
legal claims
In the event a Salomon equipment user or anyone acting upon the equipment user’s behalf contacts the Authorized Dealer regarding a potential claim:
Salomon authorized dealers
u.S.a.Alpine Legal Claims Department, SalomonU.S.A.,2030 Lincoln Ave., Ogden,UT84401.
canadaLegal Claims DepartmentSalomon Canada Sports270014thAveUnit1-4Markham, On L3R 0J1
Binding
6
Binding Quick reference chart
Brak
e
Jig Selecion (given ski
width)Drill Bit Selection
DIN
scal
e
Heig
ht (i
n m
m)
Skier weight
SCP
(Sal
omon
Con
trol P
edal
)(J
) Jun
ior e
lasti
c ped
al /
(S) S
tom
p ped
alVe
rtica
l pro
gres
sive
pivo
t
High
late
ral t
rans
miss
ion
Ski /
bin
ding
inte
rface
Wing adj.
Rem
ovab
le b
rake
Adj. Range
Wei
ght o
f 1/2
pai
r (in
g)
Ti L
ine
Seni
or /
Juni
or b
oot n
orm
s
56 m
m -
80 m
m (R
ef. #
)56
mm
- 99
mm
(Ref
. #)
80 m
m -
123
mm
(Ref
. #)
4.1
mm
dia
met
er
(skis
with
met
al) (
Ref.
#)3.
6 m
m d
iam
eter
(s
kis w
ith n
o m
etal
) (Re
f. #)
Drill
Bit
Leng
th
kilog
ram
s
poun
ds
Sim
ulta
neou
s
Auto
mat
ic
mm
US si
zes
retailpre-mountedZ12 ti Smartrak control
788908 B80
788403
001157
0008
93
0008
92
9.5 4-12 31,5 42-120 92-264 • • • Smartrak control • • 122 15 1311 Ti S
Z10 Smartrak control 788909 B80 9.5 3-10 31,5 30-107 66-235 • • • Smartrak control • • 122 15 1585 S
710 Smartrak grip 788870 B80 9.5 3-10 31,5 30-107 66-235 • • • Smartrak grip • • 123 15 1570 S
À la carte ModelsSth 16 890339 / 890338 R90/R130
Jig
Ref
. # 0
0115
6
JigRef.#001157
Dril
l Bit
Ref
. # 0
0089
3
Dril
l Bit
Ref
. # 0
0089
2
9.5 9-16 17,5 > 95 > 209 S • • • 19 2,5 1161 S
Sth 14 driver 889286 R90 9.5 6-14 17,5 58-130 127-286 S • • • 19 2,5 1060 S
Sth 14 890341 / 890340 R100/R115/R130 9.5 6-14 17,5 58-130 127-286 S • • • • 19 2,5 1025 S
Sth 12 892975/890342 R90 9.5 4-12 17,5 42-120 92-264 S • • • • 19 2,5 1015 S
Z14 789178 B80/B90 9.5 6-14 16,5 58-130 127-286 • • • • 28 3,5 1050 S
Z12 ti 789179/789181 B90/B100/B115 9.5 4-12 16,5 42-120 92-264 • • • • • 28 3,5 857 Ti S
Z 10 789184/789182 B80 9.5 3-10 16,5 42-120 92-264 • • • • • 28 3,5 970 S
Z 10 ti w 892976 B80 9.5 3-10 16,5 30-107 66-235 • • • • • 28 3,5 857 Ti S
Z10 fis 20 789185 B75 9.5 3-10 20 30-107 66-235 • • • • • 28 3,5 997 S
lZ 8 w 789189/789190 B80 9.5 2,5-8 16,5 25-90 55-200 J • • 28 3,5 861 S
711 789191/789194 B80/B90 9.5 3,5-11 16,5 36-115 79-253 • • • • 28 3,5 960 S
610 554875/ 554878/789196 B80 9.5 3-10 16,5 30-107 66-235 • • • 28 3,5 943 S
JuniortZ 5 788871/304401/
304407/789199 JR 000927
784061
0008
13
0008
14 8.0 0,5-4,5 14 10-45 max. 22-100 J • • 44 5,5 556 J&S
lZ 7 789198/789197 B80 001156
001157 8.0 2-7,5 16,5 22-
45max. 49-100 J • • 28 3,5 861 S
rentalpre-mountedkrr Z12 ti 890384 /
890385 B80
# 00
1156
#001157
Bit R
ef. #
000
893
Bit R
ef. #
000
892
9.5 4-12 31,5 42-120 92-264 • • • • • 122 15 1031 Ti S
krr Z12 258241 B80 9.5 4-12 • • • • • 122 15 - S
krr Z10 890319 / 890425 / 890381 B80/B90 9.5 3-10 • • • • • 122 15 - S
krr 711 890321 B80 9.5 3-10 • • • 122 15 - S
krr tZ 5 Sc 892586 / 892585 8.0 0,5-4,5 28 10-
45max. 22-100 J • Synchro Center • • 104 13 - J&S
À la carte ModelsZ12 Sc 890331 B80/B90/
B100/B115
Jig
Ref
. # 0
0100
3
Jig
Ref
. # 0
0104
0
Dril
l Bit
Ref
. # 0
0089
3
Dril
l Bit
Ref
. # 0
0089
2
9.5 4-12 31,5 42-120 92-264 • • • Synchro Center • • 122 15 1383 S
Z10 Sc 890332 B80/B90 9.5 3-10 31,5 30-107 66-235 • • • Synchro Center • • 122 15 1370 S
711 Sc 890334 B80 9.5 3,5-11 31,5 36-115 79-253 • • Synchro Center • • 122 15 1362 S
lZ 8 Sc 890335 B80 9.5 2,5-8 31,5 25-90 55-200 J Synchro Center • • 122 15 1195 S
609 Sc 788923 B80 9.5 2,5-9 31,5 25-100 55-220 • Synchro Center • • 122 15 1285 S
609 Sr 788924 B80 9.5 2,5-9 18 25-100 55-220 • Synchro Rental • • 80 10 1016 S
JuniortZ 5 Sr 788873 JR
0010
03
0010
40
0008
13
0008
14
8.0 0,5-4,5 14 10-45max 22-100 • Synchro Rental • • 56 7 567 J&S
lZ 7 Sr 890336 B80 8.0 2-7,5 18 22-45max. 55-100 J Synchro Rental • • 80 10 958 S
tZ 5 Sc 869425 JR#247290
8.0 0,5-4,5 22 10-45max 22-100 • Synchro Center • • 104 13 675 J&S
tZ 5 Sc Junior track 788872/554714 JR 8.0 0,5-4,5 22 10-
45max. 22-100 J • Junior Track • • 104 13 675 J&S
Need to add 2008-2009
modekls to this chart (and ide-
ally remove any older models
if possible)
Need info where cell con-
tains “?” as well as info on
pre-mounted retail models
Binding
retail Binding SySteMS
Proper procedures for a Salomon Certified Technician to follow while mounting and adjusting Salomon
Retail bindings.
retaIl systems > 7
referencepage # Section Name
17 Clean vs. Lubricated Test49 Standard Boot Sole
Dimensions
Start out prepared with an efficient working area. Your bench should be the right height, with proper light-ing,andwiththenecessarytoolsathand.Familiarizeyourselfwithallproceduresbeforeyoustart:beingprepared is the best way to avoid errors and costly mistakes. It is important that all components match those listed on the workshop form. Refer to your workshop form and make sure the bindings are appropri-ate for the skier. If the bindings have been used, make sure they are in good condition and no parts are missing, broken, or showing signs of wear.
preparation
Before drilling the ski, be sure the boot you are using is compatible with the binding. Only boots that conform with applicable standards may be used with Salomon bindings. (See Standard Boot Sole dimensions on page 49 for reference). If a boot sole is warped, worn or improp erly canted, such that there is more than a 1 mm difference in sole flatness measured across its width, the boot is incompatible.
other compatibility problems you May encounter• Cut-outsinthebootsolethat
prevent the brake from engaging properly.
• Excessiverampingorwearoftheboot sole at the point where it contacts the binding. Any wear that inhibitsbindingfunctionisexces-sive.
• Tread,gridpatternorinsigniapresentintheAFDareaofthebootsole. This area must be flat over its entire surface.
• Non-compatiblebootsolecompo-sition. Low-grade thermoplastic (T.P.) boots may not be used with Salomon bindings. If you are un-certain as to the quality of the boot sole material, perform the clean vs. lubricated test as described on page 18.
Only adult norm boots may be used withadultbindings.Undernocir-cumstances should a junior norm boot ever be used with an adult bind-ing. Salomon bindings that can be used with both junior and adult norm
boot soles are: TZ5, S305, C305, Q300, S300, their mini equivalents, earlier model indemnified equiva-lents, and their various counter parts. (The added width of an adult norm boot sole somewhat limits the shock absorption capability of these models and they should not be used with a boot sole longer than 304 mm. As a result, it is recommended that an aggressive junior skier with an adult
norm boot sole use a model designed exclusivelyforadultnormboots.)
A Salomon toe or heel may not be mounted with another manufacturer’s toe or heel. Indemnification and war-ranty are automatically voided for suchmixedsystems.
ForRental specific preparation in-structions, please refer to page 21.
Boot-to-Binding compatibility
Junior Boot to Binding compatibility chartJunior Boot Models
Boot norms
Junior Bindings only
iMportant:
Salomon bindings that can
be used with both junior
and adult norm boot soles
are: tZ5, S305, c305, Q300,
S300, their mini equivalents,
earlier model indemnified
equivalents, and their various
counter parts.
Falcon100 AdultCourse 90 AdultCourse 80 AdultCourse70 AdultFalcon60 Junior XPerforma T3 AdultPerforma T2 Junior X15 Mini Junior XPerforma T3 Rental AdultPerforma T2 Rental Junior X
Step
1Binding
retaIl systems > PreParatIon > 8Step
2
Jig Selection & use
Salomon bindings are installed 3 ways. “À la carte” bindings are installed by drilling holes into the surface of the ski with the aid of a Salomon jig. Pilot Systems require no jigs and are simply secured to pre-drilled holes on a premounted Salomon interface. Smartrak Systems can require a combination of these two tech-niques. Please refer to the specific instructions in this Manual.
inStallation
1. Select the proper jig for the binding model to be mount-ed by referencing the Jig ReferenceGuide.
2. check the skis’ serial number to ensure you are mounting a matched pair. Place the skis on the workbench with the ski tips pointed to your left.
3. open the jig by twisting both handles inward. Place the jig on the ski.
4. open the locking lever.
5. extend the jig to accept the boot.
6. place the toe of the boot sole against the toe guide. Twist the
rear handle to open the rear clamps and slide the heel guide snugly against the boot heel. fig. A
7. close the locking lever. (Compare the mid-sole mark on the boot with the mid-sole indicator on the jig. If the mid-sole mark on the boot and the mid-sole indicator on the jig do not agree, use the mid-sole mark on the boot. This requires leaving the boot in the jig to position it on the ski.)
8. position the jig on the ski. fig. S
a. If the ski has a mid-sole mark, align the mid-sole mark on the boot with the mid-sole mark on the ski.
b. If the ski has a tip-of-boot mark, align the tip-of-boot sole indicator on the jig with the tip-of-boot mark on the ski.
c. If the ski has no visible mark-ings for jig location, consult the ski manu facturer for proper mounting position.
9. once the jig is in position, release the handles simultane-ously and the jig will center itself on the ski.
10. re-check your work. The ski is now ready to be drilled. (Customers may request that specific mounting instructions be followed. This is particularly true for skiers who want to initiate turns more easily. Make a note ontheWorkshopFormofanyofthese special instructions.)
J KHGFDSA
legendA Handle with Self-Centering
ClampsSToeGuideD Tip-of-Boot Sole IndicatorF Locking LeverG Mid-Sole IndicatorH Boot Size IndicatorJ Drill Bit BushingKSelf-CenteringGuidefor
Heel of Boot
Jig use (10 Steps)
ref. # Jig Jig range application
retail JigS788403 Smartrak 70mm-116mm Smartrak binding systems only
001156 Adult Retail 56mm - 99mmSTH 16, STH 14, STH 12, Z14,Z12Ti,Z12,Z10FIS20,Z10Ti,710,610CP,610,609D+,609Ti,609,608,607(drillbitlength8 mm)
001157 Wide Adult Retail 80mm - 123mm (Same as above)78406101 Junior Retail 56mm - 99 mm 305 and 305 Mini, TZ 5rental JigS
001003 Synchro Center & Synchro Rental/ Senior Junior 56mm - 99mm All SC and SR models both Senior & Junior(exceptTZ5SC)
001040 Wide Synchro Center & Synchro Rental/ Senior Junior 80mm - 123mm All SC and SR models both Senior & Junior(exceptTZ5SC)
24729001 TZ 5 SC Junior Rental 56mm - 99mm TZ 5 SC bindings only
* Contact your customer service representative for additional jigs.
A jig ensures that all holes for binding mounting are drilled in the correct location. The bushings guide the drill bit so that it remains perpendicular to the ski.
A S Correct Incorrect
referencepage # Section Name
10 4-Hole Toe / Spheric Oversize
10 3-Hole Toe / Spheric Sport &Quadrax
22 SC System Demo 22 SR System Rental & Demo
Binding
retaIl systems > InstallatIon > 9
Followtherecommendationsoftheski manufacturer for drilling and tapping. In their absence, Salomon suggests that you use the Salomon drill Bit Selection guide. When in doubt about the ski’s core com-position, select a 3.6 mm diam-eter bit and drill one hole. If the bit comes in contact with any metal, re-drill with a 4.1 mm bit to ensure proper screw retention. exceptions: forEquipeT,XWFuryJunior,JadeJunior,TeneightyFish,andTeneightyKittenskis,drillusingei-
ther a 3,6 mm diameter drill bit (for skis under 140 cm) or a 4,1 mm di-ameter drill bit for skis greater than or equal to 140 cm. Neither tap nor glue.Useahandscrewdriveronly(3 Nm torque) to tighten the screws on the bindings.Drill through the jig’s proper bush-ings applying moderate downward pressureonthedrill.Verifythatthecounter sink bevel on the drill bit has properly de-burred the hole. fig. A After drilling, turn the ski over and hit the base several times with the
inStallation > Drilling, Tapping and Glue
drilling
S
tappingTap all binding mounting holes unless otherwise recommended bytheskimanufacturer.Failingto tap when necessary can result in topskin delamination, sidewall delamination, broken screws or damage to the ski core.The tap should be mounted into a brace. Position the brace so the
tap goes straight into the drilled hole. fig. A Apply only enough pressure to the brace to start the tap, as the tap is a self-cut-ting tool.A ski mounting plate is usually no more than 8 mm below the topskin. Tapping any deeper than 8 mm can strip the hole or break
the tap. Each full turn of the brace cutsthetapapproximately2mminto the ski. After tapping, turn the ski over and hit the base several times with the palm of your hand to remove shavings from the hole.
A
MountingA Posidrive No. 3 screwdriver, not a Phillips, is used to mount Salomon bindings. Consult the Salomon Spare parts catalog (page 66) for refer-ence on the Salomon screws. They are available through your customer service representative.
glue
• Lubricatethescrewduringinsertion.• Createawatertightseal.• Ensurethatthescrewswillhold
while the ski is in use by acting as a dampener.
Place a drop of glue on the surface of each hole. As the screw passes through the glue it coats itself.caution: Salomon strongly recom-mends its own glue for Salomon skis.
glue must be used when inserting binding screws to:
correct incorrectA
palm of your hand to remove any debris from the drilled holes.When mounting thin skis or junior skis with adult bindings you may need to use shorter screws or add washerstotheexistingscrewsbetween the binding and the ski to prevent damaging the ski base. Before drilling any junior ski, check the screw depth by positioning the binding over the mounting area so that the binding screws on one side of the heel track appear alongside the ski sidewall. fig. SSpecial cases when drilling Junior Skis• Usea9.5mmlengthdrillbitwhen
mounting Z10 TI, Z10 TI SC, Z10 SC,Z10,Z10FIS20,710,710SC,610, 609, 609 SR, 609 SC, 608, and 608 SC bindings. These mod-els use the same screws as the Salomon adult models and should be drilled and tapped accordingly.
• Asageneralrule,theS910Teamismountedonskis170cmorlonger and the S608 or C608 on skis140–170cm.TheS608or
Salomon drill Bit Selection guideSkis diameter length ref. aspect
Junior
4.1 mm(ski with metal) 8 mm 000813
1x53.6 mm
(ski with no metal) 8 mm 0008141x5
adult
4.1 mm(ski with metal) 9.5 mm 000893
1x53.6 mm
(ski with no metal) 9.5 mm 0008921x5
diameter
length
C608 can also be used with skis 120–140cm.TheS305GromandC305Gromaregenerallyused with skis 80-140 cm*. The shorter the ski, the more likely washers will be necessary to avoid dimpling the ski base.
• ThenewSalomonC607junioraccommodates adult norm boot solesandoffersa2to7DINscale. This new intermediate bind-ing for 5 to 10-year-olds features shorter 6 mm screws for use on junior skis as short as 120 cm.
• Wheneverjuniorbindingsaremounted on adult skis, an in-creasedpossibilityexistsofbind-ing pull-out due to poor screw reten tion. The penetration depth of junior screws into the ski core isonly7mm.Ifnecessary,useadult drill bits and screws to pen-etrate any mounting platform.
• Theholemustbedeepenoughtoaccommodate the screw length you are using or ski damage may result.
* eXception: S305’s and C305’s cannot be mounted on the Crossmax10TeamorXScream10 Team models manufactured from 2001 to 2003 inclusively. Both bindings may be mounted on the 2004-2005 models of the Crossmax10TandCrossmaxT,2006/2007modelsoftheXWingT,and2007/2008XWingFuryJuniorandJadeJunior.
drilling, tapping & glue
referencepage # Section Name
8 JigSelection&Use10 Retail Mounting22 Rental & Demo Mounting
partS (see page 66)reference # Item Name
000821 Blue Plastic Plugs000818 Black Plastic Plugs000819 White Plastic Plugs000822 GreyPlasticPlugs000820 Red Plastic Plugs000823 Orange Plastic Plugs000870 GreenPlasticPlugs000816 Taps000817 Tap Brace000811 Glue000862 Posidrive Screwdriver B18486 (CAN) Posidrive Bit
Step
2
Removed
Equipe 8T
Removed
Z10TIAXE+,
610 CP, 609 D+,
Binding
retaIl systems > InstallatIon > 10Step
2
legend
inStallation > General Retail Installation
general retail Mounting
referencepage # Section Name
9 Drilling,Tapping&Glue13 Binding-to-Boot
Adjustments22 SC System Demo22 SR System Rental & Demo31 Maintenance and Repairs
partS (see page 66)reference # Item Name
000905 SalomonGrease000862 Posidrive Screwdriver B18486 (CAN) Posidrive Bit
4-hole toe inStallation performance/Spheric oversizeA long bit is needed (Posidrive Bit, CAN. only Ref. #B18486, for power drills and Salomon Manual Screwdriver Ref. #000862) to mount the 4-hole pattern toes as the front two screws must be in-serted through the binding hous-ing. fig. S
Useacrisscrossscrewingpatternand insert each screw until near-ly seated. fig. D Do not tighten until all the screws are in place. ThebaseplateoftheAFDshouldbe flush with the topskin of the ski and each screw should be flush with the baseplate of the toe piece. This procedure applies for all toe pieces with a four-hole pattern.
A
S D F
All Salomon bindings feature the E-Z Mount System with the screws already in place. Position the component over the pre-pared holes to begin installation (fig. A). If a power screwdriver is used, adjust the clutch for the appropriate ski core construc-
tion. Hand check each screw after mounting.
Heel Track Heel Housing Heel Lever Heel Cup
Treadle Brake Pedal Pressure Distributors
Spheric Pedal/AFD
Toe Cup
Toe Height Adjustment Screw VisualIndicator Housing
Adjustment Screw
Baseplate Brake Arm
Sliding Center Mounting Hole
Lubrication Point*
3-hole toe inStallation Z-concept bindings, Spheric Sport and Quadrax Formodelswitha3-holepattern,first pull the center mounting hole sliding track out from the binding far enough to insert the screw into the ski. A long bit is needed (Posidrive Bit, CAN. only Ref. #B18486, for power drills and Salomon Manual Screwdriver Ref. #000862) fig. F
tighten the screw until it is firmly seated.Next,slidethetoepieceto-wards the seated center screw until the two rear screws align with their respective holes.tighten the rear screws until they are firmly seated. The base plate should be flush with the topskin of the ski and the head of each screw should be flush with the baseplate.
toe piece
heel piece Ski Brake heel piece inStallationPlace the heel over the prepared holes and insert the screws using a crisscross screwing pattern. (Do not compress the ski brake before it is mounted on the ski.) fig. G do not over tighten.
Ski Brake inStallation Do not compress the ski brake before installing it. Place the two metal tabs on the front of the brake into the slots in the heel base plate fig. H. Rotate the rear of the brake downwards to start the screw in the track. Tighten screws with a hand screwdriver (4Nmmaximum).note: The brake can be removed to facilitate ski maintenance.to remove it: turn the center screw counterclockwise and remove the brake.
G H
Toe Installation differs for 4-hole toe and 3-hole toe bindings. The former requires a criss-cross screwing pattern while the latter starts with a center mounting hole sliding track beneath the front of the toe.
*UseSalomongrease(Ref.#000905)ontrack.
S912 Ti
Z12 Ti
Binding
retaIl systems > InstallatIon > 11
inStallation > Model-specific Installation
a
b
wide Ski installation
A S wide Ski Brakes 1999 to Current Bindings
Ski Width(mm)
PerformanceRef. #
Leasure (Quadrax)
Ref. #80 78574801 78574801
85 78145901 78574901
90 78575001100 78575101115 78575201
wide Ski Jigs are available from Salomon to mount bindings on wide skis. Select the proper jig for the binding to be mounted by refer-encing the Jig Selection chart.
Reversible pads adapt fat ski jigs to different widths of skis. The pads are changed by pulling them off
the jig and repositioning them to achieve the desired width. fig. A the pads are properly positioned when they touch the jig shoulder.• 98-124mmskis:Thinsidesof
the reversible pads are positioned to the inside of the ski. fig. Sa
• 80-106mmskis:Widesidesofthe reversible pads are positioned to the inside of the ski. fig. Sb
Refer to the wide Ski Brakes chart (right). The proper width fat ski brake must be installed for each specific system or indemnification for that system will not apply.
Smartrak System installationThere are two different mounting procedures for the Smartrack interface, based on the system type.
Smartrak System
Smartrack grip & grip plus (fixed toe systems):
insert metal band into the recessed slots in the plate. fig. A
determine sole length in mm of boot.
identify the letter on the metal band that corresponds to the boot sole length. If the boot sole length is between two numbers, choose the highernumber.e.g.:Forabootsoleof320mm, choose setting “334mm D”.
Screw the center mounting sliding track into the correspondingly let-tered hole at the front of the Smartrak plate. fig. S
finish mounting the three hole toe as usual.
install the heel unit by lifting the tab located just in front of the heel piece and sliding the heel assembly onto the Smartrak plate. fig. F
attach the brake in the usual manner.
position the boot against the toe piece and slide the heel forward until it contacts the boot. Make sure the heel piece “clicks” and locks into po-sition on the track.
push the boot into the system and verify the forward pressure.Once the forward pressure is correct, the num-ber on the metal band directly in front of the heel provides a guide to the quick positioning of the second heel.
Smartrak control, response, and prolink (adjustable toe systems):
insert the metal band into the re-cessed slots in center of plate. fig. A
determine the sole length of boot to being used.
lift thetabbehindtheAFDonthetoepiece and slide the toe piece from the rear of track to the front until the boot sole length number on the metal band corresponds to, or is slightly greater than, the sole length of the boot being used.Forexample:abootsolelengthof 306mm would require that you chose a setting on the band of 308mm. Make sure the toe piece “clicks” and locks into position on the track. fig. D
install the heel piece by lifting the tab located just in front of the heel piece and sliding the heel assembly onto the Smartrak plate until the boot sole length number on the metal band cor-responds to, or is slightly greater than, the sole length of the boot being used. Forexample:abootsolelengthof306mm would require that you chose a setting on band of 308mm. Make sure the heel piece “clicks” and locks into position on the track. fig. F
install the break in the normal man-ner and proceed with binding to boot adjustments as described on page 13 or page 23.
Smartrak interface Mounting
Steeringplate interface
The Smartrak interface is available for use with flat skis.
position the Smartrak metal jig (ref#788403)socentermarkon
jig aligns with center mark of ski. When installing a Smartrak plate make sure the recessed slots at the front of the interface are positioned towards the tip of ski
proceed with drilling, taping, and gluing as described on page 9.
assemble Smartrak binding follow-inginstructionasexplainedabovein Smartrak System installation.
CompatiblewithquadraxandZbinding.
Mounting: according to the boot sole length selected, tighten the screws
on the toe and heel pieces (4Nm torque) in the corresponding position on interface:253-281mm 273-301mm293-321mm 313-341mm
333-361mm 353-381mm
Mount the brake following the usual procedure.
A S D F
Step
2Binding
To begin mounting any LAB binding modelontoanyinterfaceexcepttheZZ Speed 2 see the note below then procedetonextstep.Tomountonto the ZZ Speed 2 interface, select a ski with the correct size ZZ interface plate (S, M, or L) for the boot sole length by referring to the ZZ Speed 2 installation chart. Align the binding assembly on the ZZ interface using the screw posi-tion number code (1 or 2) found in the ZZ Speed 2 installation chart. fig. F
tighten the toe screws in a criss-cross pattern.
Verify that the heel track is posi-tioned correctly. The end of the metal blade should be 3 mm for-ward of the end of the stainless steel heel track. fig. G
tighten the heel screws in a criss-cross pattern.
VerifythattheheightsuitsFISnorm limits (50-55 mm).
install the brake.
retaIl systems > InstallatIon > 12Step
2
Measure boot sole length in mm and then break the yellow plastic blade spacer (fig. A) at the appropriate length (the resulting spacer should include the last tab which matches the boot length).
Slide the yellow blade spacer onto the metal blade until it rests against the black base plate. Make sure the metal blade is properly seated in spacer.
insert the end of the blade spacer into the recessed area on the bottom of the toe piece base plate. fig. S
insert the post of the metal blade lock plate between the rear two screws of the toe piece. Press firmly into place. fig. D
Lifter shims are an option on all LABmodelsexcepttheZ14LAB.If required, attach the appropri-ate lifter shim, (yellow = 2 mm, black = 1 mm). do not add more than 5 mm of lifters.
inStallation > Model-specific Installation (continued)
A
installation of the Z14 laB, 914 laB, 916 laB, 920 laB bindingswarning: the 914 laB, 916 laB, and 920 laB are the only bindings that should be installed on the ZZ interface
S D F
G H
laB Binding installation
noteInstalling anyLABbindingmodelontoanyinterfaceexcepttheZZSpeed2 requires a slightly different approach to assembly and mounting. assembly: the yellow plas-tic blade spacer has letter codes corresponding to the boot sole length and must be broken at the appropriate tab. Make a note of this letter. The rest of the assembly is the same. Mounting begins by aligning the binding assembly’s center mark (arrow on the yellow blade spacer) to the corresponding letter code on the interface before tightening the toe screws and continuing with the rest of the mounting and adjust-ment as with current models.
ZZ Speed 2 InstallationBoot sole
length(mm)
Size Letter Code
Screw Position
1 2
265-297 S 265-282 283-297298-327 M 298-311 312-327328-343 L (N/A) 328-343
Jig use with extra large Boot Solesoccasionally a boot sole is too large to fit a jig. in this instance, the following procedure should be used to allow correct mount-ing of the binding:1. Openthejigtoitsfullyextend-
ed position.2. Place the boot heel into the jig
against the heel guide.
3. Measure the length of the sole thatextendsoverthetoearrow(viewed from the underside) of the jig.
4. Divide this length in half (mea-surement A).
5. Placethefullyextendedjigontothe ski with the boot mid-sole mark aligned with the mid-sole mark on the ski.
6. Move the jig forward of the mid-sole the same distance as measurement A and drill the toe holes.
7. Re-alignthejig’smid-solemarkto the ski’s mid-sole mark. Move the jig backwards from the mid-sole mark the same distance as measurement A and drill the heel holes.
8. Installthebindings.(Verifythatscrewpenetrationwillnotex-ceed hole depth.)
referencepage # Section Name
8 JigSelection&Use9 Drilling,Tapping&Glue14 ReleaseValueSelection&
Adjustment14 Requested Settings
partS (see page 66)reference # Item Name
000902 Salomon Adjustment Tool001023 Adult Binding Paper Jig001056 Salomon Powder Option887528 PoweraxePaperJig
Salomon distributes competition bindings to racers and coaches. These bindings are intended to be used by skiers with special reten-
tion needs. If these bindings are used by recreational skiers, there is a far greater risk of injury due to the use of more powerful springs.
Refer to requested Settings for instructions for skiers request-ing settings not recommended by Salomon.
competition Bindings > intended use
assembly
Mounting
adjustmentplace boot into binding system and adjust the toe as usual.
check the forward pressure: With the boot in the binding (closed posi-tion), adjust the forward pressure to align the top of the head screw with the back of the heel track. fig. H
Binding
retaIl systems > adjustment > 13
Binding-to-Boot adJuStMentS
heel position / forward pressure
toe cup width
toe heightAll Salomon retail binding models must have a clearance of 0-0.5 mmbetweentheAFDandboottoe. fig. K
automatic wing adjustment Models. Toe height adjusts automatically on all current automatic wing adjustment binding models (Z14 to TZ 5).
Manual Models. Currently only the 914 bind-ing model features manual toe height adjustment. Raise the toe by turning the adjustment screw, located on top of the toe piece, counterclockwise. Pull the boot back to create a gap between the bootsoleandthebindingAFD.Adjust the toe height to create a gap of not more than 0.5 mm or until the boot sole just touches the
AFD.YoucanuseaSalomon0.5mm toe height adjust ment card to gauge this clearance. do not over tighten. (Always re-check the forward pressure adjustment after making any toe cup adjustments.)
referencepage # Section Name
14 ReleaseValueSelection&Adjustment
32 AFDReplacement
S FA
correct incorrect
G H J
K
adjustment tab Models. (All current retail models) Check that the tip of the boot sole is flush against the butt plate of the toe piece (or central roller of applicable models). The forward pressure is correct when the ar-row on the adjustment tab lines up within the scribed area at the end of the heel housing fig. A or when the arrow of the rear of the heel housing lines up within the
scribed area on the adjustment tab. fig. S 2008-2009 models no longer have embossed arrows on the adjustment tab. The back edge of the tab should be used instead. fig. D If this adjustment is incorrect, remove the boot from the binding, lift the adjustment tab using a Salomon Adjustment Tool and slide the heel to the desired position. fig. F Re-insert the boot and check the adjustment.
Micro Metric heel adjustment for the Sth 16 and 12.With the boot in the binding (closed position), adjust the forward pres-sure to align the top of the screw head with the back of the heel track. fig. G
all forward pressure adjustments should be verified with the boot in the binding.
independent wing adjustment Models.
The adjustment screws for mod-els with independent wing adjust-ments are located on each side of the toe piece. Adjust each wing snugly against the boot sole so that the boot is centered over the ski. fig. G do not over tighten fig. H as it forces the boot back-ward, increasing the forward pres-sure. When properly adjusted, the
toe contacts the boot sole at three points: the butt plate and the low friction inserts in each wing arm.
Simultaneous wing adjustment Models.
(916, S914, S912, S810, S850 Models and their predecessors). The adjustment screw for models with simultaneous wing adjustments is located on the left of the toe piece. fig. J By turning this screw, both toe wings adjust
simultaneously. Adjust the wings snugly against the boot sole. do not over tighten. The toe cup adjust-ment is correct when there are three points of contact: the butt plate and the low friction inserts on each wing arm.
automatic wing adjustment Models. SphericSportandQuadraxmodeltoe wings adjust automatically. The C305 adjusts automatically to ac-
cept either children’s or adult norm boots. (The added width of an adult norm boot sole somewhat limits the shock absorption capability of the C305. It is suggested that aggres-sive junior skiers with an adult norm bootsoleuseamodeldesignedex-clusively for adult norm boots.)
adjusting
G
D
Step
3Binding
what type of skier are you?
determining your Skier type is your responsibility! Your skier type, height, weight, age and ski boot sole length are used by the shop to determine the visual indi-cator settings of your ski bindings. Be sure to provide accurate infor-mation, as any error may increase your risk of injury. Consult these descriptions to select your clas-sification:
type 1 “cautious skiing at lower visual indicator settings”• Preferslowtomoderatespeeds.• Prefergentletomoderateter-
rain.• Receivelowerthanaveragevi-
sual indicator settings. This may increase the risk of inadvertent binding release in order to in-crease the likelihood of release in a fall.
• Type1settingsapplyto“entry-level skiers uncertain of their classification”.
type 2 “Moderate skiing at aVerage visual indicator set-tings”• Preferavarietyofspeeds.• Prefervariedterrain.• Type2skiersareskierswhodo
not meet all the descriptions of Type 1 or Type 3 skier types.
type 3 “aggressive skiing at higher visual indicator settings”• Preferfastspeeds.• Prefersteepterrain.• Receivehigherthanaveragevi-
sual indicator settings. This may reduce the likelihood of release in a fall in order to decrease the risk of inadvertent binding re-lease.
Iffromexperience,youhavebeendissatisfied with visual indicator settings resulting from your se-lected skier type classification, you may wish to consider: (a) chang-ing your skier type classification; (b) selecting different skier type classifications for toe and heel components; (c) selecting skier Types -1 ("for skiers who desire visual indicator settings lower than settings for a Type 1 skier") or 3+ ("for skiers who desire visual indi-cator settings higher than settings for a Type 3 skier").
retaIl systems > release value > 14
determining Skier type
releaSe Value Selection & adJuStMent
It is the skier’s responsibility to determine Skier Type. Skier Type is not the same as skier ability and the two should not be confused. Skier Type must be indicated on the workshop form or rental form by the skier. The Skier classification chart is available in small and large poster size versions from Salomon and should be displayed to assist customers in classifying themselves.
These descriptions are compatible with ASTM and ISO documents.
release agreementi, hereby acknowledge that I have been advised by the
(rental shop, sales department, etc.) that the setting which I have
requested for my bindings (Model ) is not the setting recommended by the manufacturer of the bindings for a skier of my height, weight, age and skier type. I understand that as a condition of obtaining this setting on the bindings at the time of their de-livery, I must agree to forever release the shop, its employees and agents, the manufacturer, and the distributor from any and all liability for injury or death which results to me or others from the use of these bindings. I acknowledge that there may be increased risk of injury or death to me as a result of my own personal preference for binding setting, particularly in view of the inherent and other risks of the sport of skiing. I hereby waive all claims arising from the use of the bindings and release from all liabil-ity the shop, the distributor and the manufacturer, their agents and em-ployees and I further agree to indemnify them from any and all liability or harm or damage of any kind whatsoever which may result from the use of these bindings by myself or anyone I allow to use the bindings.
I, the undersigned, have read and understand this liability release agree-ment, and agree that it is binding upon me, my heirs, guardians, adminis-trators, assigns, and legal representatives.
Skier Signature (or, in the case of a minor, that of the skier’s parent or guardian)
Shop Manager’s Signature
requested SettingsSkiers requesting Settings not recommended by Salomon
The 2008/2009 Salomon adjustment chart is the only release adjustment chart authorized for use by Salomon dealers during the 2008/2009 sea-son. Salomon recognizes a skier’s right to choose settings outside those recommended as per the current Salomon Adjustment Chart (particularly when the skier’s preferred setting is also within the range of acceptable settings).
If the skier requests a setting other than the one derived from the current Salomon Adjustment Chart, the shop may:• AdjustthesystemtoindividualrequestsIFthetechniciannoteson
the workshop or rental form the reason the higher or lower setting was requested. The customer must verify the request for the higher or lower settings by signing and dating the form by the noted reason of the setting request. (It is suggested that the shop have the skier sign a release identical to the release agreement printed on this page. The release must then be attached to the completed workshop or rental form.) NOTE: Current Salomon workshop and rental forms include a "Requested Settings" option for customer requested settings, which eliminates the need for a separate release in such instances.
• AdjustthesystemtothesettingderivedfromtheSalomonAdjustmentChart and instruct the skier on how to change the setting.
Step 4
Binding
retaIl systems > release value > 15
2008/2009 Salomon adjustment chart
releaSe Value Selection & adJuStMent > (continued)
All current model Salomon bindings use the DIN adjustment scale. Release setting numbers on this scale are referred to as “visual indicator set-tings.” Some older model Salomon bindings were manufactured prior to the establishment of the DIN standard scale and use a different adjustment scale. Refer to previous Shop Practices Manuals to adjust these models.The 2008/2009 Adjustment Chart is the only release adjustment chart authorized for Salomon dealers during the 2008/2009 season. Only those settings recommended by Salomon should be used when de-termining the appropriate adjustment for each skier’s system. Refer to Skier’s requesting Settings not recommended by Salomon (page 14) for skiers requesting other settings.
The following procedure is used for determining visual indicator set-tings using the 2008/2009 Salomon Adjustment Chart.1. FindtheSkier’sCode.Locatethe
skier’s weight and height in the first two columns. If the skier’s weight and height are not in the same row, select the Skier’s code that is closest to the top of the chart.
2. The skier’s code is appropriate for Type 1 skiers:• ForType2skiers,movedown
on the chart one row. • ForType3skiers,movedown
on the chart two rows.
• ForType-1skiers,moveuponthe chart one row.
• ForType3+skiers,movedownon the chart three rows.
• A skier may select different skier types for toe and heel piece.
3. Forskiersage9andyoungerorage 50 and older, move up the chart one row. • Forskiers29lbs.andunder,no
further correction is appropriate.• Forskiers38lbs.andunder,
Skier Type -1 is inappropriate.4. Locate the column that represents
the skier’s boot sole length (in mm).
5. Theboxattheintersectionoftheskier’s boot sole length column and the Skier’s Code row shows the initial visual indicator setting for the skier. If the intersection of the row and column falls in a blankbox,moveleftorrightonthesamerowtothenearestboxshowing a visual indicator setting.
6. Record the visual indicator set-tingsontheWorkshopForm.• If a skier selects different skier
types for toe and heel piece, it must be recorded on the work-shop or rental form in the order toe/heel (T/H), using a (/) to separate the two types.
Visual indicator Setting adjustment Adjust both toes and heels of the system to the visual indicator setting derived from the adjustment chart. Sometimesatechnicianmayexperi-encedifficultydeterminingexactlywhere the visual indicator should appear in the binding’s visual indica-torwindow.Forexample,asettingof51/2 is not precisely marked on the binding. The technician should use those values that are clearly marked on the binding as reference points and set the release adjustment as close as possible to the setting that isrecordedontheWorkshopForm.
determining & adjusting Visual indicator Settings
Step
4Binding
retaIl systems > fInal checkIng > 16
Visual inspection of System components
final checking & ViSual inSpectionWhile anyone can mount and adjust a Salomon binding, to receive indemnification from Salomon a Salomon CertifiedTechnicianmustsignorinitialtheWorkshopFormattestingthatallsystemsinspectionshavebeenperformed.AFinalCheckisyourqualitycontrolmeasuretoverifythatallrequiredprocedureshavebeenproperly completed.
test for Boot/Binding compatibilityCheck the boot/binding combination to ensure all components are com-patible.Unlessabindingisspecificallydesignedforusewithbothjuniorand adult norm boot soles, adult and junior systems cannot be combined, e.g., junior boots with adult bindings or vice versa. If the system passes this test, mark “Pass” (√) on the WorkshopForm for “Test of Boot-Binding Compatibility.”
If you are not sure that the boot complies with standards or if you are not sure that the system components are compatible, see troubleshooting.
the Boot• InconsistencieswithISOand
applicable norms. • Grossirregularitieswherethe
boot contacts the binding and theAFD.
• Unacceptablelowgradethermoplastic construction.
• Rubberand/ormetaltipprotectors
• Moldflashings.• Excessivewear.
• Debrislodgedinthesole.• Warpedorimproperlycanted
boot sole.• Cut-outsinthesolethat
impede proper brake function. (If you are uncertain of boot compatibility, perform the clean vs. lubricated test. Boots that fail this test or violate any of the above points should not be used with any Salomon binding.)
the Ski• Mountingscrewsprotruding
through the base.• Delaminatedsidewall.Thiscan
be detected visually or by run-ning your fingers along the sides of the ski.
• Bindingbaseplatesnotflushwithski surface.
• Delaminatedtopskin.• Pre-drilledholes.Asageneral
rule, bindings should not be installed on skis that have previ-ously been drilled for three or more sets of bindings.
the Binding components• Stripped,looseor
missing screws.• ConditionoftheAFD(ripped,
loose, imbedded dirt, boot sole pattern, tread imprint, etc.).
• Conditionofanti-frictioninserts(where applicable).
• Missingorunreadablevisualindicators and missing windows.
• Bentorbrokenbaseplate,principalaxisorhousing.
• Strippedorjammedtoeheightand cup adjustment screws.
• Jammedreleaseadjustmentscrew.
• Othervisiblewear.• Improperlyinstalledleash
or brake.• Irregularheeltrackfunction.• Bentorbrokenbaseplate,track
or heel.
the Ski Brake• Improperbrakearmlength.• Improperinstallation.• Brokenentrypedals.• Bentorbrokenbrakearms.
• Strengthofskibrake.Abrakemust not compress totally when the ski is set on a flat surface.
• Othervisiblewear.
Visual inspection of the complete Systemplace the boot in the binding and check the accuracy of:• Toeheightadjustment
(if applicable).• Toecupwidthadjustment
(if applicable).• Centralrolleradjustment
(if applicable).
• Forwardpressureadjustment.• Visualindicatorsettings.• Symmetricalmountingofbind-ingstoskicenterline(%1mm).This should be in the same loca-tion on both skis.
referencepage # Section Name
49 Standard Boot Sole Dimensions
18 Troubleshooting20 SalomonWorkshopForm
S
test for elastic travel & return
lateral Secure the ski. Hit the forefoot area of the boot with an object that will not damage the boot, such as a rubber hammer. fig. AUsesufficientforceto move the boot off-center, but not hard enough to release the system. The boot should move off-center at least 5 mm and return to center within 2 mm of its original position.
Vertical Depress the heel lever while pulling forward on the upper cuff of the boot until the boot heel lifts at least 5 mm. fig. S Release both hands simul-taneously. The boot should return to the ski quickly and smoothly. This inspection can be performed either manually or by using a mechanical testing device. If a testing device is used, follow the recommendations of the test device manufacturer for proper procedure.
If the system passes these tests, mark “Pass” (√) on the Workshop Form for “Test for Elastic Travel & Return”. If the system fails, see troubleshooting.
A
common compatibility problems
Step 5
Binding
Exercisethetoebyreleasingitoncein each direction. Measure and record the test result for both clock-wise and counterclockwise directions fig. A with a force or torque-mea-suring device. The test result is the middle quantitative value of three measured release values. If the first
two measured values are the same, there is no need to take a third mea-surement. See examples of Middle Quantitative Values (above)
The toe passes this inspection if the test results in both directions fall within the “Inspection Range”
as determined from the Salomon adjustment chart. See Sample Systems inspection ranges (above).
If your test results for clock wise and counterclockwise release appear tobeatoppositeextremesofthe
inspection range, you may have an installation error or an incompatible boot. This is known as asymmetric release. Troubleshoot the system and re-test after the problem has been corrected.
retaIl systems > testIng > 17
Mechanical inSpectionIt is a requirement* for Salomon indemnification that all ski/binding/boot systems be verified using a force or torque measuring device.**A previously damaged binding component or boot may break during the added stress of mechanical testing. Consumers should be advised of this possibility prior to any mechanical testing of their equipment.
A
twist test (toe)
Exercisetheheelbyreleasingitonce. Measure and record the test result using a force or torque measuring device. fig. S The test result should be within the “Inspection Range.” If both twist and forward lean results fall within
the appropriate inspection range, mark “Pass” (√) on the workshop formfor“ReleaseValueWithinSpecified Range.”
S
forward lean test (heel)
referencepage # Section Name
15 2008/2009 Salomon Adjustment Chart
18 Troubleshooting20 SalomonWorkshopForm
note*U.S.Dealersonly;recommended
for Canadian Dealers.**ForSalomonindemnificationto
apply, the shop must follow the test device manufacturer’s requirements for:
• Properuse.• Validcalibration.• Calibrationcheckatrecommend-
ed intervals.• Consistentresultsbetweentech-
nicians operating this device.
If the twist test or forward lean test results are not within the “Inspection Range” but are withinthegreater“In-UseRange,”the visual indicator of the com-ponent affecting the test result should be readjusted to bring the test result within the “Inspection Range.” If the test result is out-sidethe“In-UseRange,”refertotroubleshooting. It is not neces-
sary to record any of the test re-sults on the workshop form. It is only necessary to record whether the system passed or failed each inspection and the final visual indicator settings. Any system component that repeatedly fails any inspection should not remain in use. When the technician is sat-isfied that all required procedures have been completed according
to Salomon’s recommendations in this manual, he or she must sign the workshop form. (The signing technician must be currently certi-fied by Salomon.)
examples of Middle Quantitative Values
3 Maximum release Values
Middle Quantitative Value
(Test Result) 45, 40, 50 45 60, 50, 50 50 30, 40, 45 40 55, 65, 60 60
Sample Systems inspection ranges Based on Skier Code "L"
inSp
ecti
on r
ange
in-u
Se r
ange
58
78
43
50
67
ref
x
x
twist test & forward lean tests > release Value within Specified range
results not within the Specified range
Step
6Binding
retaIl systems > testIng > 18
troubleshooting
Boot/Bindingsystemswearwithtime.Thisisexpected.Normalwearand/orfatigueofasystemcanbeexpected.Ifasysteminspectionindicatesasystemisnotfunctioningasintended,thecauseoftheproblemmust be identified and corrective action should be taken.
Thefirststepistore-examineeach component of the ski/bind-ing/boot system individually. If a problem is found, e.g., stripped toe height screw, out-of-standard boot sole, improperly mounted binding,missingAFD,etc.,properBinding-to-Boot adjustments can-not be made. No further work can be performed on the system. Mark “Fail”(√) on this section of the workshop form.*
If the system failed the test for elastic travel & return, check that all boot/binding interfaces are clean, smooth and clear of debris. If the boot is dirty, clean it with a solution of mild dish washing soap and water. If the binding is dirty, clean it according to the proce-dures described in Maintenance and repair. Check that the boot enters the binding correctly. Make sure the boot is properly posi-tioned in the toe and heel cups. Check the visual indicator set-
tings.Theyshouldnotexceedtheminimumormaximumsettingandshould be set appropriately for the skier. Re-test the system for elastic travel & return. If the sys-temfailsthistest,mark"Fail"(√) on this section of the workshop form.*
IfthesystemfailedtheTestForBoot/Binding Compatibility, mark "Fail"(√) on this section of the workshop form.* If you are not sure that the boot complies with the mandatory standards, or if you are not sure that the boot/binding system components are compat-ible, do a clean vs. lubricated test. To perform a clean vs. lubricated test, all adjustments to the system, e.g., visual indicator settings, forward pressure adjust-ments, etc., must be the same as when the system was previously tested. Lubricate the boot with a mild dish washing soap wherever it contacts the binding and wipe off
anyexcesslubricant.Performthetwist test and forward lean test as done previously and record your results.Next,comparetheresultsof the lubricated test with those of the previously performed non-lu-bricated clean test. Plot the results on the compatibility tables. If the results don’t fall within the shaded “Pass” window on the table, the BOOT is incompatible with the binding and should not be used. Mark“Fail”(√) on the workshop form.*
If no problems have been found with the system and the release Value within Specified range cannot be obtained, further tests mustbeundertaken.First,switchtesters to check operator accuracy. Next,checktheaccuracyofthetesting device per the device man-ufacturer’s recommendations. Re-test the system. If the system re-leasesoutsidethe“In-UseRange,”
mark“Fail”(√) on this section of the workshop form.*
If the customer refuses to have work done that is necessary to bring the system within standards, or requests work that violates the recommendations of this man-ual, the technician should check theboxnexttothestatement indicating out-of-standard com-ponents on the workshop form. A note should be made in the Comment section of the form de-scribing the problem and the skier should be warned that continued use of the system is inadvisable. The shop will not be indemnified for work done on that system.
Mechanical inSpection > Troubleshooting
* the customer should be informed of, and authorize, action needed to correct the problem. please refer to the technical reference section for warranty information on binding components covered under warranty.
400
360
320
280
240
200
160
120
80
40
00 40 80 120 160 200 240 280 320 360 400
fail
fail
pass
ForwardLean(Nm)
clean test
lubr
icat
ed t
est
ForwardLean(Nm)
100
90
80
70
60
50
40
30
20
10
00 10 20 30 40 50 60 70 80 90 100
passfail
fail
Twist (Nm)
clean test
lubr
icat
ed t
est
Twis
t (N
m)
twist test
compatibility tables: clean vs. lubricated tests
forward lean test
referencepage # Section Name
16 TestForElasticTraveland Return
16 TestForBoot/BindingCompatibility
20 SalomonWorkshopForm81 Salomon Retail Binding
Limited Warranty
Step 6
Binding
retaIl systems > record keePIng > 19
Skier inStruction, warning & record keepingSkier instruction & warning
When the Certified Technician signs orinitialstheWorkshopForm,thetechnician attests that all proce-dures have been completed. It is not necessary for the technician to personally provide the skier with in-structions as long as the shop does. To help reduce your shop’s liability risk and to receive indemnification from Salomon, take the following steps whenever a skier picks up their equipment. (If the individual picking up the equipment is not the intended user, treat that individual as though they were the intended user. In the case of minor skiers, follow these steps in the presence of both the minor skier and a parent or legal guardian.)
explanation of entry/exit/re-entryThe proper use of the system (entry, exitandre-entry)mustbeexplainedusing the skier’s own system as an example.
explanation of parts and release adjustmentsShow the skier where the visual indicator adjustment caps/screws are located. Point out the binding-to-boot adjustments. Indicate where the visual indicator settings are
recordedontheWorkshopFormandhave the customer verify that the settings recorded on the form agree with the settings appearing in the visual indicator window of the bind-ing.(Itisnotnecessarytoexplainhow these numbers are derived.) Although skiers may work on their own system, suggest that if a prob-lem develops, the system should be taken to a Salomon Authorized Binding Dealer.
receipt of in-Box instructionsWhen a skier purchases a new binding, it is required that they also receivethein-boxpamphletincludedineachbindingbox.Thepamphletshould be reviewed with the skier so that it is fully understood.
Skier Signature on the workshop formThe skier must read and under-stand the conditions specified in the Liability Release Agreement. Point out that the skier is signing a release of liability and that included in the release is a specific warning that the binding will not release under all circumstances nor is it possible to predict every situation in which it
will release, and it is, therefore, no guarantee of the skier’s safety.
the Skier must then sign the workshop form, indicating the skier:• Hasbeeninstructedintheproper
use of the equipment.• Hasreceivedthein-boxpamphlet
(new bindings only).• Hasverifiedthatthevisualindicator
settings correspond to the record-edsettingsontheWorkshopForm.
• Hasreadandunderstandsthespe-cific information on the Workshop Formthatreleasestheshop,manu-facturer and distributor from liabil-ity.
• Understandsthatskiinginvolvesinherent risks and that injuries are a common and ordinary occurrence of the sport.
• UnderstandsthatincludedintheLiability Release Agreement is the specific warning that the binding will not release at all times or under all circumstances where release may prevent injury or death, nor is it possible to predict every situa-tion in which it will release, and it is, therefore, no guarantee of their safety.
• Understandsthatthebindingsshould be maintained as per suggestions in Maintenance guidelines prior to the beginning of each season and every 30 skier days per year.
The person who signs the Workshop Formshouldbetheintendeduserofthe equipment. In the case of a mi-nor skier, the signature on the form must be that of the skier’s parent or legal guardian. If someone other than the skier or the skier’s parent or guardian picks up the equipment, this person should be treated as though he or she were the skier and, therefore, must sign the Workshop Form.AnotemustbeplacedontheWorkshopFormthatthe“agent”must transmit the information to the intended user. If a skier refuses to signtheWorkshopForm,Salomonwill not provide indemnification and the shop should consider refusing to provide service to the skier.
receipt of workshop formThe skier must be given a copy of theWorkshopFormthatincludesasigned copy of the Liability Release Agreement.
retail record keepingA Salomon authorized shop is required to keep accurate records of work performed. Aside from the legal reasons, accurate records pro-vide a permanent history of the cus-tomers you have serviced over the years. Workshop records must be kept for five years or for the statute of limitations of the state or prov-ince, whichever period is longer.
The following is a list of informa-tion* that must be recorded every time a Salomon binding is mounted and/or adjusted. It is not necessary to use a Salomon workshop form, but any form that the shop uses should include all the information listed below.*1. *Date of transaction.2. *Name and address of the skier.3. *Skier’s height, weight, age and
skier type.4. *Skis (brand, model and serial
number).5. *Boot (brand, model and sole
length).6. *Binding (brand and model).
7. *Skier’s Code.8. *System inspection results
("Pass"or"Fail"forallfunctionaltests must be indicated).
9. *Visualindicatorsettings.10. *Salomon Certified Technician’s
initials or signature attesting that all functional tests and instructional procedures have been completed.
11. *Liability Release Agreement which is either the same as/or substantial equivalent of the Salomon form.
12. *Skier signature (or that of the skier’s agent or, in the case of a minor, that of the skier’s parent or guardian) attesting that the skier:a. Has been instructed in the
proper use of the equipment.b.Hasreceivedthein-boxpam-
phlet (new bindings only).c. Has verified that the visual
indicator settings correspond to the recorded visual indica-tor settings.
d. Has read and understands the Liability Release Agreement ontheWorkshopForm.
e. Understandsthatthereareinherent and other risks in the sport of snow skiing and agrees to assume those risks.
f. Understandsthatincludedin the Liability Release Agreement is the specific warning that the binding will not release under all circum-stances where release may prevent injury or death, nor is it possible to predict every situation in which it will re-lease, and it is, therefore, no guarantee of their safety.
g.Understandsthatbindingsshould be maintained as per suggestions in Maintenance Guidelines.
13. Notes on the boot sole’s ma-terial, shape and/or condition should be made when neces-sary.
14. If the visual indicator settings vary from the recommended setting, note the reason for this. Attach a signed release to the WorkshopForm.NOTE:CurrentSalomon workshop and rental forms include a "Requested Settings" option for customer requested settings, which elimi-nates the need for a separate release in such instances.
15. Refusal to serve statement. This statement should be written so as to absolve the ski shop from any liability when the customer refuses to have work performed as per guidelines of Salomon and the shop
note* Without this information, indemni-
fication will not apply.
referencepage # Section Name
20 SalomonWorkshopForm20 Liability Release
Agreement31 MaintenanceGuidelines
Step
7Binding
retaIl systems > record keePIng > 20
Skier inStruction, warning & record keepingSalomon workshop form*
partS (see page 66)reference # Item Name
B1wSfM (U.S.only)WorkshopForm
B10008 (Can. Bilingual) WorkshopForm
note*U.S.formshown.
referencepage # Section Name
19 Skier Instruction & Warning
Step 7
Binding
21
rental & deMo Binding SySteMS
preparation
Bindings are designed to be used with specific norm boot soles, i.e., ju-nior norm boot soles with junior bindings and adult norm boot soles with adultbindings.Undernocircumstancesshouldajuniorbootbeusedwith
an adult binding. The C305 and S305 are designed for use with junior norm boot soles and smaller adult norm boot soles.
Two jigs are needed to mount current model Salomon rental bindings. The jigs can be used for both Synchro and non Synchro Systems. Please refer to the rental Jig Selection chart (right) for the reference numbers.
See page 23 for Synchro pre-set requirements. Contact your
customer service representative for additional jigs to mount older models of Salomon rental bind-ings.
See Jig Selection & use on page 8 for more information.
referencepage # Section Name
7 Boot-to-Binding Compatibility
8 JigSelection&Use9 Drilling,Tapping&Glue24 RentalVisual&
Mechanical Inspections27 Maintenance Records
Boot-to-Binding compatibility
Jig Selection
ForgeneralPreparationInstructions,pleaserefertopage 7.All rental skis must have an Identification Number and a method to record maintenance and testing informa-tion (e.g., Salomon sample Ski/Binding Maintenance record and Boot Maintenance record).
partS (see page 66)reference # Item Name
001156 Adult Retail Jig001003 Rental Jig001040 Rental Jig Wide Skis78313301ExtralightJig
rental Jig Selection chart
Models Din Scale
Jig Ref. #
Boot Sole Range (mm)
Synchro Pre-Sets Required
(Toe height & Toe wings)Sk
i wid
th
56 -
99 m
m
Wid
e sk
is
80 -
123
mm
Z12 SC 4 to 12
Jig
Ref
. # 0
0100
3
Jig
Ref
. # 0
0104
0
260 - 382 •710SC 3 to 10 260 - 382609 SC 2.5 to 9 260 - 382609 SR 2.5 to 9 230 - 308608 SC 2to7.5 260 - 382607SR 2to7 230 - 308305 SC 0.75to4.5 216 - 304305 SR 0.75to4.5 190 - 246TZ 5 SR 0.5 to 4.5 190 - 246TZ 5 SC 0.5 to 4.5 #
24729001216 - 304
TZ 5 Juniortrak 0.5 to 4.5 200 - 308
Step
1
Proper procedures for
a Salomon Certified Technician to follow while mounting and
adjusting Salomon Rental and Demo bindings.
Removed Z12 Ti SC,
Z10 Ti SC
Binding
rental & demo > PreParatIon 22
legend
Heel Track Adjustment Loop
Adjustment Screw
VisualIndicator Heel Lever Heel Cup Brake Pedal
Adjustment Range Indicators
Spheric Pedal/AFD
Toe Cup Toe Height Adjustment Screw VisualIndicator
Adjustment Screw
Toe Length Adjustment Screw
Brake Arm Heel Housing Baseplate Lubrication Point*
*UseSalomongrease(Ref.#000905)ontrack.
inStallationThe Salomon Synchro System is designed to simplify rental operations. Setup efforts of the system are minimal,sincetheonlyextrastepforSynchrosetupistheplacementofSynchroSizingStickersonallboots. Models released since 2004-2005 no longer even require sizing stickers – the boot sole length (in mm) is used instead.
partS (see page 66)reference # Item Name
001156 Adult Retail Jig001003 Rental Jig001191 Wide Sizes Rental Sticker006017 SC Synchro Sizing Stickers 006016 SR Synchro Sizing Stickers 001189 Salomon Boot Sole
Measuring Device000902 Rental Adjustment Tool
There are two basic types of Synchro System bindings: SC and SR. While both have a moveable heel piece, only the SC (Synchro Center) models have a moveable toe, allowing both the toe and heel piece to be adjusted to “center” the boot.
To set up the Synchro Systems, you will need: Salomon rental bind-ingswithSynchroHeelGuidesandthe parts listed below
Step 2
Sr Models (non-moveable toe) are mounted using the Retail procedures.
non-Synchro System FollowSynchroSystem procedures, omitting mea-surementofbootsandaffixingSynchro Stickers.
Sc Models (moveable toe) are mounted using the procedures de-scribed below.
first, set the jig to the proper posi-tion. It is imperative that the jig be set correctly and all bindings be mountedatthecorrectposition.Forconsistent mounting, drill the jig and pin it in the correct position.
next, place the jig properly on the ski, drill the ski and remove any shavings. Place a drop of glue onto the drilled holes. On SC (move able toe) model bindings, mount the toe plate securely with the four screws provided fig. A. Move the adjust-ment lever on the front of the toe to the left and con tinue to slide the toe onto the plate fig. S.
Slide the central plate onto the toe piece, fig. D then position the heel over the central plate and holes, fig. F and tighten using a criss-cross pattern.
2004/2005 and later Synchro center Systems use color-coded adjustment range indicators.
Simply read the boot sole length in mm’s (stamped on the side of the boot sole) and move the toe to the corresponding mm length range position fig. G. Each range is indi-vidually color coded.
Then move the heel to the correct color coded mm length mark shown on the heel track cover fig. H.
Color coding makes it easier to read. Forexample:whenthetoeisposi-tionedintheyellow(296–307mm)range, look for the matching yel-low rectangles (296 mm, 304 mm, 307mm)ontheheeltrackcover.
pre-2004 Synchro SystemsOlder Synchro systems require the use of Synchro Sizing Stickers which give an alpha-numeric code for each boot size . Measure all boots in in-ventory with the Salomon Boot Sole Measuring Device (Ref. #001189) fig. JandaffixtheappropriateSynchro Sizing Sticker to each boot (excludingshortmountedSphericPropulse models) fig. K.
Salomon Synchro System
A S FD
G H KJ
Removed “The system eliminates the
need to place a boot in the binding
to make adjustments, result ing in in-
creased overall efficiency. It is possible
to reduce the amount of time spent on
adjustingeachsystembyupto40%
.“
Binding
rental & demo > InstallatIon > 23
Synchro center Models. Move the button on the front of the toe to the left, and slide the toe to the Synchro position indicated. Ensure
thetoelocksfirmlyinplace.ForS850 and other non-current SC models, push the toe back, de-press the button on the left side of the toe, and slide the toe into position. fig. A The toe locks into place automatically. The adjust-ment is correct when the mid-sole mark on the ski is aligned with the mid-sole mark on the boot.
automatic Models. Sport/Quadraxtoeshaveautomatictoe height adjustment.
Micrometric Models.Raise the toe by turning the ad-justment screw, located on top of the toe piece counterclockwise. Pull the boot back and continue to
turn the adjustment screw coun-terclockwise until you see light between the boot sole and the bindingAFD.Turnthescrewclock-wise until the gap is no more than 0.5 mm or preset for Synchro sys-tems using a preset toe height.*
finger adjustment Models. Lift the adjustment loop at the back of the heel and slide the heel forward to the Synchro posi-tion indicated or until the binding heel cup contacts the boot heel. fig. S Release the loop, push the
boot down and check the forward pressure indicator. The silver tab should be visible in the housing window. fig. D (It is not neces-sary to put the boot in the binding for Synchro applications.)
S D
note* Synchro presets.
Micrometric toe heights, inde-pendent and simultaneous wing adjustments can be preset using a Standard norm Boot Sole (page 49) for Synchro applications. A dab of silicone caulk can then be put into the slot of the adjustment screws to prevent tampering.
referencepage # Section Name
14 ReleaseValueSelection&Adjustment
24 Pre-Season Inspections
Binding-to-Boot adJuStMentSadjusting
toe heighttoe position
heel position / forward pressure
automatic wing adjustment Models. Same as retail counter-parts (see page 13).
independent wing adjustment Models. Same as retail counter-parts (see page 13) or preset for Synchro systems using a preset toe width.*
Simultaneous wing adjustment Models. Same as retail counter-parts (see page 13) or preset for Synchro systems using a preset toe width.*
toe cup width
A
Step
3
Junior tZ 5 Sc installation
A S FD
G H
The TZ 5 SC comes with an interface plate which must first be installed on the ski before sliding the toe and heel pieces onto its tracks. Mounting the TZ 5 SC interface plate requires anewjig(ref.#24729001)thoughthe procedure should otherwise be familiar.
center the jig on the ski and drill asusual(refertoJigUseaswellasDrillingTapping&Glueonpages 8 and 9).
Mount the TZ 5 SC interface on the ski using the screws provided.
check the manual lock of the toe piece is totally opened (fig. A)
and remove the brake lock from the brake.
Slide the toe piece onto the front of the interface until it corresponds with or is just above your boot sole length (fig. S). Make sure the toe unit clicks into place.
close the manual lock (fig. D).
Slide the heel piece onto the back of the heel track while holding up the manual lock (fig. F) until it cor-responds with or is just above your boot sole length (fig. G). Make sure the heel unit clicks into place.
caution: check again that the man-ual lock of the toe piece is closed (fig. H).
[Mike Aicher Jun 25] E2: I am of the mind that we can remove this from the manual. Anyone still using this has over 3 year old inventory, and they can refer to previous manuals for the info.
Removed e2™ Ski/
Boot/Binding System
Moved TZ 5 SC from
nextpage
Binding
All current Salomon rental bindings must be adjusted according to the 2008/2009 Salomon adjustment chart. This is the only release adjustment chart authorized for Salomon bindings during the 2008/2009season.Foradetaileddescriptionofthechartsand procedures recommended by Salomon, please refer to pages 14 & 15 of this Manual.
rental & demo > adjustments > 24
Preseason inspections are per-formed on components of the release system: bindings and boots. All rental bindings, new and used, are visually inspected, and then tested using specially selected Reference Boots. Bindings that fail go through a troubleshooting proce-
dure to identify and correct the de-viation or malfunction. If this proce-dure does not correct the problem, the binding is removed from inven-tory. All rental boots, new and used, are visually inspected for damage, wear, contamination, broken or missing parts, or inferior materials
at contact points with the binding. In addition, one boot per “cell” is tested for boots that are new to the rental inventory. A cell is all boots of the same make, model, age, and shell size. A random selection of 5%ofallboots,previouslyacceptedinto inventory, is also tested. Tests
are performed with a test device and a pair of specially selected reference bindings. If a boot fails, all boots from that cell are then tested. Boots that fail and cannot be repaired are removed from inventory.
ThemechanicalinspectionsdiscussedinthissectionarerequiredofU.S.dealersandarestrongly recommended for Canadian dealers, both in the interest of consumer protection and as a sound risk-management strategy. Maintenance records must be kept for all bindings and bootsininventoryforbothpre-seasonandin-seasoninspections.OnlyPass/Failresultsshouldberecorded.Ifbindingsareswitchedfromone pair of skis to another, this should be noted on the records. To receive indemnification from Salomon, maintenance records must be kept on file for five years or the statute of limitations in your state or province, whichever is longer.
releaSe Value Selection & adJuStMent2008/2009 Salomon adjustment chart
rental ViSual & Mechanical inSpection
Step 6
Step 5
Step 4
Since it is impractical to perform a full inspection each time a system is rented, a routine of preseason and inseason inspections has been
developed to verify release indi-cator accuracy, confirm correct equipment function, and assure proper assembly and adjustment
procedures by the rental shop staff.Fullyimplemented,thepro-cedures that follow provide rental shop customers a standard of care
equivalent to that provided retail shop customers under current ISO [and ASTM] standards.
rental inspection Summary
pre-Season inspection
inseason inspection
Inseason inspections are performed on complete rental systems to ensure that the equipment is adjusted appro-priately and continues to function cor-rectly.Typically5%oftherentalinven-tory is tested during each two weeks sampling period. The random sample is equally divided between equipment
that is available for rental and equip-ment that has just been rented. The equipment in the “as rented” category is from real skiers in the condition in which it is either dispatched or re-turned, while the “available for rental” equipment may be set up for fictitious skiers. Only single skis, not pairs, are
tested, and testing at the toe is only required in one direction. A count is maintainedoftestresultsthatexceedallowable limits. The magnitude and frequency of these deviations deter-mines the frequency of future inspec-tions. Shops that fail an inspection must sample daily until the source of
the problem is found and corrected. Then, as inspection results improve, the frequency of sampling and inspec-tionisrelaxed.
important terms
correction factor: The value that must be added or subtracted from the initial visual indicator setting to bring the test result within the Inspection Tolerance (or Inspection Range).
directions of release: Unlessotherwise specified (see Inseason Inspection), the directions of release to be tested are forward lean and clockwise and counter clockwise in twist.
test device: A device that meets ISO standard 11110 [or ASTM standard F1061]andhasbeencheckedandmaintained in the manner specified by the device manufacturer.
test result or release torque: The middle quantitative value of three tests made in the same direction.
Binding
rental & demo > InsPectIon > 25
rental ViSual & Mechanical inSpection > (continued)
preseason inspection
inspection procedures
reference Boot Selection
The Reference Boot is a boot of a designated sole length that is oth-erwise typical of the boot inventory. Usetheprocedurebelowifthebootinventory includes several models and a representative boot cannot be easily identified.1. Select five single boots with sole
lengths as specified in table a for the binding type to be tested: adult, junior, or child.
2. Clean all five boots with a mild detergent and water.
3. Adjust a rental binding to the re-lease indicator setting specified in table a for the binding type.
4.Fitthebindingtothebootsanddetermine the Release Torque in all three directions of release (forward lean and both direc-tions in twist).
5. Average the Release Torque for CW and CCW twist release.
6. Reject and replace any boot with a CW to CCW difference of more than 6 Nm for adult boots or 4 Nm when testing child boot types.
7.Rankthefivetwistresultsandselect as the Reference Boot for twist, the middle boot.
8. Rank the five forward lean re-sults and select as the Reference Boot for forward lean, the middle boot.
preseason Binding inspection
The procedure that follows is an integral part of preseason main-tenance. It is also a good way to de-termine if maintenance is adequate and which units have outlived their usefulness and must be removed from inventory.1. Clean areas of the bindings that
contact the boot and perform all preseason binding mainte-nance.
2. Visuallyormanuallycheck:•AFDcondition.•Brakesfunction.•Releaseindicatorreadability
and travel.•Screwtightness.•[otherproductspecificin-
spections if required]3. Fiteachbindingtothe
Reference Boot and adjust the release indicators to the value in table a.
4. Check that the heel track and toe track code (if any) agree with the sole length code (if any) of the Reference Boot.
5. With the Reference Boot in the binding, verify elastic travel of the toe piece by striking the boot toe with a mallet or dead hammer and checking that the toe piece returns the boot quickly and completely to cen-ter.
6. Verifyelastictraveloftheheelpiece by lifting the boot while depressing the heel piece cock-ing lever and checking that the heel piece returns the boot quickly and completely to the latched position. [other product specific procedures if required]
7. Manuallyreleasethebinding3times in each direction.
8. Lubricate all boot/binding inter-faces with a mild liquid deter-gent and water solution.
9. With the Ski Binding Test Device determine the Release Torque for each direction of release (forward lean and both directions in twist).
10. Record “PASS” in the bind-ing’s maintenance record if Test Results are within the Inspection Ranges provided in table a.
11. Set the ski aside if the Test Result in any directions of re-lease is outside the Inspection Range in table a.
12.FollowTroubleshootingProcedure from the binding manufacturer’s tech manual for units that have been set aside and retest if changes in the unit’s condition or adjustment are made.
13.Record“FAIL”inthebinding’smaintenance record if, after troubleshooting, test results in any direction of release are out-sidetheIn-UseRange.Replacethe “failed” unit and retest be-fore returning the ski to service.
14. If after troubleshooting, Test Results are outside the Inspection Range but within theIn-UseRange,applyaCorrectionFactortotheunitandnotetheCorrectionFactorfor that unit in the binding’s maintenance record.
15. If many bindings fail, check the test device and re-inspect the Reference Boot. If necessary, select another boot and retest the bindings.
preseason Boot preparation
The procedure that follows is an integral part of preseason main-tenance.1. Clean all boots with [a mild
detergent and water], and repair or replace damaged or missing parts.
2. Visuallycheck:•ConformancewithISOand
other applicable standards. If the boot contacts the binding, brake,orAFDinareasotherthan the designated contact points, it may be incompat-ible with the binding. [product specific figure or description]
•Bootmaterial.Ifthesoleat the contact points with thebindingorAFDcanbescratched with a finger nail, the boot may be of inferior quality and incompatible with the binding.
•Bootsolecondition.Iftheboot sole is damaged, worn, or contaminated at contact pointswiththebindingorAFDin a manner which can not be corrected, the boot may be incompatible with the binding.
•Brakecompatibilitywithsole.•Rubberand/ormetalsole
protectors. If such materials contactthebindingorAFDthe boot may be incompatible with the binding.
•Moldflashings.Flashingwhich can be seen or felt at contact points with the bind-ing,brake,orAFDmustbecarefully removed.
3. Remove from inventory all boots that have failed the visual check.
preseason Boot Sampling
Although sampling eliminates the need to test every boot before the season starts, the sample cho-sen must be representative of the inventory. 1. Forbootsthatarenewtoinven-
tory or have never been in-spected, take a single boot from each cell (a cell is all boots of the same make, model, year, and shell size).
2. Forusedboots,takea5%(butnot less than 16 or more than 80) random sample of the en-tire inventory. Make sure that there is at least one boot from each cell in the sample.
referencepage # Section Name
16 FinalChecking16 Test for Elastic Travel &
Return17 ReleaseValueWithin
Specified Range18 Troubleshooting49 Standard Boot Sole
Dimensions
table a : preseason Binding inspection*
Skier Code
Binding Type
Sole Length (mm)
Release Indicator Setting
Reference Torque (Nm)
Inspection Range (Nm)
In-Use Range (Nm)
Twist Forward Lean Twist Forward Lean Twist Forward LeanF Children 270 2.5 25 94 21-29 80-108 17-31 66-122J Junior 306 4.5 45 175 38-52 149-201 31-59 122-228L Adult 327 6.0 60 239 51-69 203-275 42-78 167-311
*Thisisanexampleonly.Checkthemanufacturer’stechmanualbeforeproceeding
Step
5St
ep 6
Ref.: July 11th phone
conference call
Binding
rental & demo > InsPectIon > 26
rental ViSual & Mechanical inSpection > (continued)
inspection procedures (continued)
preseason Boot inspection
The procedure that follows helps to assure both boot/binding compat-ibility and boot interchange ability. Note: when using table a, in the Boot Inspection procedures that follow, the Sole Length and Release Indicator Setting columns should be ignored. 1. Randomly select a pair of
bindings that have passed the preseason inspection from each binding type; adult, junior, child.
2. Lubricate all boot/binding con-tact points with a mild liquid detergent.
3. Without regard to whether the boot is new or used, sort the sample by sole type and length
according to the 20mm Sole Length Categories defined by the binding manufacturer’s ReleaseValueSelection.
4. In each Sole Length Category rank the boots by sole length and select the middle boot.
5. In each Sole Length Category fit the appropriate reference bind-ings to this “typical” boot and adjust the two bindings to re-lease as close as practical to the Reference Torque in table a. UsetheReferenceTorquecor-responding to Skier Code [L] for the Adult binding, [J] for the Junior binding, and [J] for the Child binding.
6. Rinse the lubricant from one binding and mark it “clean.” Mark the other “lubricated.”
7. TesteachbootintheSoleLength Category with the clean Reference Binding and then the lubricated Reference Binding in both twist and forward lean (only one direction in twist is required for the clean binding).
8. Set aside any boots for which the lubricated Test Result is morethan20%lessthantheclean Test Result in the same direction of release or the lubri-cated Test Result, in any direc-tion of release, is outside of the Inspection Range provided in table a for the Skier Code used
to set up the Reference Binding (L,J,orF).
9. RepeattheVisualCheckonallboots that have been set aside, correct any defects noted, and retest. Remove from inventory boots that fail the retest.
10. Check all other boots from the same cell (make, model, year, and shell size) as those that failed.
note: On completion of the pre-season inspection, clean the liquid detergent from the equipment (and lubricate the binding before return-ing it to service).
Step 6
Step 5
inseason Sampling and inspection
The Inseason Inspection is a test of complete systems and all the pro-cedures used by the rental staff to assemble and adjust the system. The program uses random samples of rental inventory taken at routine intervals. Any sampling program that gives every unit of inventory the same chance as every other of being picked is valid.
Sample frequency
Random sampling is conducted throughout the entire season. Frequencyisasfollows:1.After7daysofoperation.2.Ifthesamplepasses,thenextsamplingistakenafteranother7days of operation.
3. If two consecutive samples pass, sampling frequency is increased to 14 days.
4. If a sample fails at any time, daily sampling is instituted until two consecutive samples pass, at which point weekly sampling resumes.
Sample Size
Samplesizeis5%ofinventorybutnot less than 16 nor more than 80 units as noted in table B. Sample size is based on average daily out-put. If rental output drops below 50%ofcapacityoverthesamplingperiod, the sample size can be re-duced proportionately.
inseason inspection1. Take a random sample of the
rental inventory as determined by table B. Take half the sample from inventory as it is either rented or returned and the re-mainder from inventory avail-able for rental.
2. Wipe the boot clean and cycle the boot/binding systems at least once in each direction.
3. Test sample units in Twist (one directiononly)andForwardLean.
4. Compare the Test Results with the Inspection Range for the ap-propriate Skier Code.
5. If the results are within the Inspection Range, the unit passes.
6. If the results are outside Inspection Range but within the In-UseRange,counttheunitasa Class I Deviation.
7. IftheresultsareoutsidetheIn-UseRange,counttheunitasaClass II Deviation.
8. Check elastic travel and visually inspect the ski brake function, interface areas between boot andbinding,includingAFD,lugheight adjustment (if appropri-ate), and forward pressure. Count any deficiencies as Class I Deviations.
9. Ifmorethanthemaximumnumber of Class I Deviations given in table B are found in the sample, or a single Class II Deviation is detected the sample fails and daily sampling must be conducted until the problem that led to the failed sample is found and corrected. See the “Troubleshooting” chapter of the binding manufacturer’s
technical manual following a failed Inseason Inspection.
10. Record the date the sample was tested, the number of units tested, the number of Class I and Class II (or III) Deviations, whether the sample passed or failed and any actions taken. There is no need to record the identity of units tested or actual Test Results.
table B : Sample SizeInventory
Size (Pairs)
Sample Size
(Units)
Maximum Class I
Deviations100 16 3200 20 4300 30 6400 40 8500 50 10600 60 12700 70 14800 80 16900 80 16
referencepage # Section Name
16 FinalChecking16 Test for Elastic Travel &
Return17 ReleaseValueWithin
Specified Range18 Troubleshooting
demo inspections > incomplete SystemsSkisBindings intended for demo appli-cations, where customers supply their own boots, must be inspected using the procedures described for rental equipment. Whenever a demo or rental binding is used with a customer’s own boot, inspect the
customer’s boot for Boot/Binding compatibility as described on page 16. Reject any boots that fail visual inspection. Both boots of the pair must be inspected and the boot sole lengths of both boots verified.
BootsWhenever customers rent boots for use with their own skis, the customer’s binding system must be mechanically inspected (us-ing the rental boot) according to procedures described for retail equipment.
Binding
rental ViSual & Mechanical inSpection > (continued)
Maintenance records
rental & demo > InsPectIon > 27
Ski/Binding Maintenance record
invenory #: Ski Serial #: Binding Model:
Date of Service/Inspection Repairs/Service Performed Vi
sual
In
spec
tion Correction Factors Left Ski Right Ski
Tech
nici
an’s
In
itial
s
Left Right Twist
Forw
ard
Lean
Twist
Forw
ard
Lean
Toe Heel Toe Heel
Boot Maintenance record
invenory #: Boot Model: Sole length:
Date of Service/Inspection
Norm Compatible Interchangeable
All Adjustments/Parts Functionsl
Repairs/Service Performed
Clean Test Lubricated TestTe
chni
cian
’s
Initi
als
Twist
Forw
ard
Lean
Twist
Forw
ard
Lean
Legend: Clockwise Counter-clockwise
Legend: Clockwise Counter-clockwise
Step
5St
ep 6
Binding
rental Skier instrucion & warning
Skier inStruction, warning & record keeping
It is the Dealer’s responsibility to adequately assist each rental customer in equipment selection and to prop-erly fit rental boots. Instructions regarding proper use of equipment must also be given at the time rental equipment is provided.
rental & demo > record keePIng > 28
When the Certified Technician signsorinitialstheRentalForm,the technician is attesting that all functional and instructional pro-cedures have been completed. To reduce your shop’s liability risk and to receive indemnification from Salomon, you must take the fol-lowing steps when the skier re-ceives their equipment. (The indi-vidual picking up the equipment must be the intended user, or in the case of a minor, the user’s par-ent or guardian.)
1. Show how to step into the bind-ing.
2. Show how to step out of the binding.
3. Point out the visual indicator settings on the binding’s toe and heel pieces. The skier must verify that these settings agree with the settings recorded on theRentalForm.
4. Ask the skier to read the Liability Release Agreement. Point out that the skier is sign-ing a release that limits liabil-
ity. Included in this Liability Release Agreement is the specific warning that bindings will not release under all cir-cumstances where release may prevent injury or death, nor is it possible to predict every situa-tion in which they will release, and are, therefore, no guarantee of safety.
5. The skier must understand that there are inherent and other risks in the sport of skiing.
6. The skier* must then sign and datetheRentalForm.
7. The skier must be given a copy of the rental form that includes a signed copy of the Liability Release Agreement.
referencepage # Section Name
16 FinalChecking&SystemInspection
29 SalomonRentalForm29 Equipment Rental
& Liability Release Agreement
30 Post Accident Ski Equipment Inspection Report
note* On the 2008/2009 Salomon Rental Form,theskier(orinthecaseofa minor, the skier’s parent or legal guardian) must sign and date the Liability Release Agreement.
rental record keeping
Proper rental record keeping is key to your shop’s risk management program. Without a properly filled out form, including a signed Liability Release Agreement, indemnification from Salomon will not apply.
ARentalFormmustbefilledoutforeachrentaltransaction(ex-change of equipment is considered to be a transaction). A Liability Release Agreement the same as or the equivalent to the Salomon Liability Release Agreement must beincludedontheRentalForm.The skier must read, under stand, sign and date this release. A copy of the properly filled out Rental Formmustbekeptonfileforfiveyears or the statute of limitations of the state or province, whichever is longer. Multiple skier forms that allow each skier to read and sign the same form may be used if the form meets the requirements out-lined in this section. It is recom-mended that the form be reviewed by Salomon’s Legal department prior to use. The person who signs the rental form must be the skier who is going to use the rental equipment. In the case of a minor skier, the signature on the form must be that of the skier’s parent or legal guardian.
The following is a list of informa-tion that should be recorded for every rental transaction. It is not necessary to use a Salomon Rental Form,butanyformthattheshopuses must include the informa-tion* listed below. Without this information*, indemnification will not apply.1. *Rental dates.2. *Name and home address of
the skier.3. Skier’s home phone number.4. Skier’s identification.5. *Skier’s height, weight, age,
and skier type.6. *Boots' inventory number. (If
the skier is using their own boots, the boot brand, model and sole length must be in-dicatedontheRentalFormand the boot must pass visual examination.)
7. *Skis'inventorynumber.(Ifthe skier is using their own skis, the system would fall under Retail guidelines and a complete system inspection,
including a mechanical inspec-tion, must be performed and documented on a Workshop Form.)
8. *VisualIndicatorSettings.9. *Salomon Certified
Technician’s signature or ini-tials attesting that all required procedures have been com-pleted.
10. Rental fee.11. *Liability Release Agreement
that is either the same as, or the substantial equivalent of, the Salomon release. Consult your shop’s legal advisor to be sure the language and type size of this agreement con-forms to state or provincial law. If a form other than the Salomon form is used, the language shall accomplish the same purpose and have the same legal effect as the language contained in the Salomon agreement.
12. *Skier’s signature (in the case of a minor skier, the signa-ture on the form must be that of the skier’s parent or legal guardian) and date attesting that the skier:a. Has been instructed in the
proper use of the equip-ment.
b. Has verified that the visual indicator settings corre-spond to the recorded visual indicator settings.
c. Has read and understands the Rental and Liability Release Agreement on the rental form, releasing the shop from liability.
Step 7
Binding
Skier inStruction, warning & record keepingSalomon rental form*
rental & demo > record keePIng > 29
referencepage # Section Name
28 Rental Skier Instruction & Warning
partSreference # Item Name
B1rSfM (U.S.)SalomonRentalFormB10019 (CAN)SalomonRentalForm
note*U.S.formshown.TheCanadian
equivalent to this form has bilin-gual content.
Step
7Binding
rental & demo > record keePIng > 30
post accident Ski equipment inspection report form
Skier inStruction, warning & record keeping
APostAccidentSkiEquipmentInspectionReportFormthesameasorequivalenttotheformprovidedmustbefilled out if a person returns the equipment, whether the equipment is theirs or belongs to someone else, and claims that they or someone else were injured. The report must be completed with “as is” mechanical inspection measured release values. An insufficient or improperly completed form may cause denial of indemnification.
general information•Allinformationshouldbeprinted
clearly.•Anymistakesshouldbecorrected
and initialed.• Ifinformationisunknown,markUNKintheappropriatearea.
• Ifinformationdoesnotapply,markN/A in the appropriate area.
Skier information Section•Skierinformationshouldbetaken
from the rental or workshop form.•Accident/injuryinformationshould
be taken from the ski patrol acci-dent report (if available).
equipment information Section• Informationshouldbetakenfrom
the visual inspection of equipment.
equipment inspection/tests Section•RefertothemostcurrentShop
Practices Manual for Standard Boot Sole information.
•Equipmentinspectionsshouldbeconducted on the equipment “as is”.
• Inspectionofbindingadjust-ments should be in accordance with recommendations set forth in the most current Shop Practices Manual.
•Systemvisualinspectionsshouldbe in accordance with recommen-dations set forth in the most cur-rent Shop Practices Manual.
•Mechanicalinspectiontestsshouldbe conducted at room temperature.
•Themechanicaltestingdeviceshould be properly calibrated and operated in the manner recom-mended by the device manufac-turer.
•Mechanicaltestsshouldbecon-ducted on the equipment “as is”.
•TestresultsshouldberecordedinNewton meters.
facility/personnel/testing device Section•The“InspectionTechnician”should
be a current Salomon Certified Technician.
•Thereportshouldbereviewedbythe shop manager.
inspection report instructions
Skier informationNAME vaccident date
height vweight vage vSeX (circle one) vSkier type (circle one)
M f 1 2 3 -1 3+
inJury
right or left (circle one) vSki area
r l
equipment informationSki Make vModel vlength
Serial no. vrental i.d. no. (if applicable)
Boot Make vModel vSiZe
Boot Sole length in mm vrental i.d. no. (if applicable)
Binding Make vModel
toe ViSual indicator (din) Scale vheel ViSual indicator (din) Scale
to to
rental forward preSSure (Synchro) Setting(S):
equipment inspection/testsright Ski/Binding/Boot left Ski/Binding/Boot
n/a yeS no (check one) n/a yeS no (check one)
Boot sole within Industry Norm Standards Boot sole within Industry Norm Standards
All boot parts present, working correctly All boot parts present, working correctly
AFDOKandintact AFDOKandintact
ForwardPressurecorrect ForwardPressurecorrect
Toe Height correct Toe Height correct
Toe Wings set correctly Toe Wings set correctly
Brake fully functional Brake fully functional
Ski damaged (bent etc.) Ski damaged (bent etc.)
System passes visual inspections System passes visual inspections
Rental heel forward pressure setting correct Rental heel forward pressure setting correct
ViSual indicator SettingS ViSual indicator SettingS
toe: heel: toe: heel:
clockwiSe twiSt MeaSured releaSe ValueS* clockwiSe twiSt MeaSured releaSe ValueS*
i ii iii i ii iii
counterclockwiSe twiSt MeaSured releaSe ValueS* counterclockwiSe twiSt MeaSured releaSe ValueS*
i ii iii i ii iii
forward lean MeaSured releaSe ValueS* forward lean MeaSured releaSe ValueS*
i ii iii i ii iii
* record the number of results recommended by the manufacturer of the testing device. if not certain, record 3 values for each test.
facility/personnel/testing deviceShop naMe vinSpection technician vdate
report reViewed By vdate vteSting deVice Brand v Model
post accident Ski equipmentinspection report
workshop/rental form no.
Step 7
Binding
maIntenance & rePaIr > 31
Binding Maintenance & repair
Proper maintenance of rental systems includes a complete inspection of the entire rental inventory prior to the ski season. Bindings should be cleaned, inspected and lubricated in the follow-ing manner:• Inspectallcomponentsofeachsetfordamageorexcessivewear.Repairorreplacedamagedorex-cessively worn parts and/or compo-nents.
• Removetheheelbyslidingthehous-ing off the rear of the heeltrack*.
• Cleantheexposedareasofthecom-ponents with a cloth or rag. Wipe any dirt or grit from the binding housings, heel track and the region under the heel cup. Do not use sol-vents or high pressure liquid clean-ing systems to clean bindings.
• ApplySalomonGrease(Ref.#000905) or the equivalent to the lubrication points indicated for each model. Do not use silicone or pen-etrating oils unless the lubricant is specifically approved.
• Replacetheheelonthetrack.• Thisshouldbefollowedbyperiodic
in-season inspections and when a binding looks particularly dirty or if visual inspection reveals that some-thing may be wrong. This helps to ensure that all components are functioning correctly.
Never attempt to interchange any SR, SC or retail toe baseplates or heel tracks with other model baseplates or heel tracks.
rental post Season Storage
To prepare rental equipment for sum-mer storage:• Allbindingvisualindicatoradjust-
ments should be reduced to the low-est setting. Do not attempt to adjust the release setting below the lowest setting as damage may result.
• Thebindingheelsshouldbestoredin the closed position.
• Theequipmentshouldbestoredina cool, dry and ventilated area away from direct sunlight.
retail & rental guidelines
Maintenance & repair
retail guidelines
rental guidelines
Salomon bindings require a mini-mum of maintenance to enhance performance and their useful life. They should be cleaned, inspected and lubricated prior to each season and every 30 skier days per season as follows:• Inspectallcomponentsfordam-ageorexcessivewear.Repairor
replacedamagedorexcessivelyworn parts and/or components.
• Cleantheexposedareasofthecomponents with a cloth or rag. Wipe any dirt or grit from the binding housings, heel track and the region under the heel cup. Do not use solvents or high pressure
liquid cleaning systems to clean bindings.
• ApplySalomonGrease(Ref.#000905) or the equivalent to the lubrica tion points indicated for the appropriate model. Do not use silicone or penetrating oils unless the lubricant is specifically ap-proved.
• Recommendtotheskierthatroutine maintenance and inspec-tions be performed by a Salomon Authorized Dealer. This will help ensure that any problem that may develop with the system can be detected and corrected by a trained technician.
Any incorrect use of a Salomon part or accessory or installation of a non-compatible brand accessory with a Salomon system will automatically void both the warranty and indemnification for that system.
All Salomon bindings have replaceableAFDs.SpecificAFDitemnumbers can be found in the Salomon Spare Parts catalog (page 66) and ordered by contacting your customer service representative.
note* To remove heel pieces on tracks
with heel locks, loosen the rear mounting screws at least three turns. Pull the heel piece back ward while lifting it up over the heel lock. To replace the heel pieces, follow the removal proce dure in re-verse and tighten the rear mount-ing screws securely.
cants > acceptable use
• Thecantsareofahighgradema-terial designed for this use.
• Thecantsareinstalledinaprofes-sional manner.
• Properscrewpenetrationintotheski meets current norms.
• Thecantsdonotimpedethebind-ing’s function as it was designed,
including proper function of the brake.
Salomon bindings should not be altered in any way except as explicitly outlined in this manual. the use of cants with Salomon bindings is acceptable, provided:
Binding
maIntenance & rePaIr > guIdelInes > 32
Screw extractor/repair kit
SalomonoffersaScrewExtractor/RepairKit(Ref.#000878)tore-move/ replace broken binding mounting screws. The kit comes with two different length bits and a quantity of repair plugs. fig. A Repair plugs may be ordered sepa-rately.
Stripped Screw holesFollowinstructionsfortheinstalla-tion of repair plugs (below).
Broken Screw or Broken tap removal When a screw or tap breaks in a ski, it must be removed to avoid further damage. It can be removed as follows:
fit the extractor drill bit into the electric drill with the shoulder touching the chuck.
position the appropriate jig onto the ski with the jig bushing directly over the broken screw or tap.
drill slowly around the broken piece using an up-and-down move-
ment to let the shavings escape. Usecautionnottohitthebrokenpiece.
continue to drill until the chuck touches the bushings of the jig. This is the correct drilling depth of 10 mm.
remove the broken piece inside the extractorbitwithapairofpliers.
turn the ski over and hit the base lightly to remove all shavings.
follow instructions for the installa-tion of repair plugs (below).
re-mount the binding.
clean theextractorbitaftereachuse.
installation of repair plugs Theexistingholemayneedtobewidened using an 8 mm diameter bit, however do not drill more than 10 mm deep.
place a drop of glue onto the top of the hole.
tap a repair plug into the hole with a hammer until it is flush with the topskin of the ski.
A
Maintenance & repair > (continued)
afd/Scp replacement
tZ 5, tZ 5 Sc & lZ 7-8-9 anti friction plate replacement
other Models1. Dismount the toe piece from the interface or from the ski.2. RemovetheAFDfromthetoepiecebaseplate.3. PositionthereplacementAFDonthebaseplateandpressitintoplace.4. Remount the toe piece.
A S D F
Salomon control pedal replacementAll Salomon bindings have replaceable SCPs. The specific SCP item numbers can be found in the Salomon Spare parts catalog (page 66), though some SCP Reference Numbers are listed in the chart below..Replacement procedures for SCPs are as follows.for toes mounted on interfaces and Skis (Smartrak grip/grip plus, Sc, and itf)1. Dismount the Toe piece from the
Ski or The Interface by completely loosening the mounting screws.
2. Dismount manually the SCP on the Toe piece.
3. Take the new SCP and mount it manually under the Toe piece.
4. Tighten the Toe piece on the ski or the Interface (4Nm torque).
for toes mounted on Smartrak prolink/control/response1. Put the Toe Piece out the
Interface.2. Dismount the Toe piece from the
Set by completely loosening the mounting screws.
3. Dismount manually the SCP+Stirrup on the toe piece.
4. Take the new Set SCP+Stirrup and mount it manually under the Toe piece.
5. Tighten the Toe piece on the Stirrup (4Nm torque).
6. Remount the Toe piece on the Interface.
Scp reference numbersScp ref. n° Binding / System78830001 914FIS20/914
78830101
Z12 Ti, Z12, Z12 Ti SC, Z10TiAxe+,Z10TI,Z10FIS20,Z10TiSC,Z10,710Ti,710SC,710,710ITF.
78829401 Smartrak Prolink +914
78829501Smartrak Prolink & Smartrak Control+ Z14, Z12,Z10,711
78829601Smartrak Prolink & Smartrak Control+ Z12 Ti,Z10Ti,710Ti
noteForinstructionsonreplacingtheAFDonQuadraxmodels,pleasereferto the 2006-2007 Salomon Shop practices ManualForinstructionsonreplacingtheAFDonSphericPerformanceandS710TiSpheric models, please refer to the 2005-2006 Salomon Shop practices Manual
1. Insert a 6-8 mm wide screwdriver at the front of the plate. fig. A
2. Move over the screwdriver to eject the plate. fig. S
3. Place the new plate and hand clip it. fig. D & F
Junior performance afd upgradetZ 5, tZ 5 Sc, tc45, and eVoX 045 bindings were developed to fit both adult and junior boot standards,
and are delivered with a universal junior pedal which has been validated bydealersandtheTÜVorganization.Salomon also offers a specific Junior performance afd (ref. 89267001) upgrade meant to increase slope performance for junior specialists, whichcanbeexchangedwiththeuniversal one. note: The replacement junior pedal (red) must be used only
with junior boot standards. fig. G Specifically, it may only be used with junior boots with a toe thickness of 16.5 +/- 1.5 mm.
caution: for models with elastic pedal (range 08), check the presence of the elastic block under the pedal. fig. H
partS (see page 66)reference # Item Name
000905 SalomonGrease000878 ScrewExtractor/RepairKit000846 Repair Plugs
referencepage # Section Name
49 Standard Boot Sole Dimensions
partS (see page 66)reference # Item Name
54834001 TZ5/TZ5SCUniversalAFD89267001 TZ5/TZ5SCJuniorAFD
GJU
NIO
R
JUNIOR
!
H
Binding
certIfIcatIon > exam > 33
certification prograMThe technician who signs the Authorized Location’s workshop or rental form for any transaction must be currently Salomon alpine binding certified
technician certification eXaM2008/2009 technician certification exam Questions
do not write on this form. indicate answers on the registration form.Ascoreof90%,or20correctanswers,mustbeobtainedtopass.Inaddition,questions3to7,10, 11, and 13to17areconsideredcorequestionsandmustbeansweredcorrectly.
1. Salomon technician certification:a) Is valid whether or not the employer is a Salomon Authorized Alpine
Binding Dealer.b) Never has to be renewed.c) Isvalidfor2yearsfromtheexamdateandmaybetransferred
between Salomon Authorized Alpine Binding Dealers.d) Does not require that Certified Technicians be familiar with Salomon
Bindingsthroughhands-onexperience.
2. indemnified Bindings are:a) The 2008/2009 models only.b) Those that appear on the 2008/2009 Schedule of Indemnified
Bindings in the Salomon Shop Practices Manual.c) Any Salomon binding still in use.d) Not something a technician needs to know about.
3. examples of Salomon bindings that may be used with both junior & adult boot sole norms are:a) 607&608b) STH 12 & STH 16c) TZ 5 & C305d) You can’t use an adult norm sole with a Salomon junior binding.
4. a boot is considered incompatible with a Salomon binding if:a) It does not pass visual inspection.b) There is more than a I mm difference in sole flatness across its
width.c) It does not conform to Standard Boot Sole Dimensions.d) All of the above.
5. if the mid-sole indicator on a Salomon jig and the mid-sole indicator on a boot do not agree, you should:a) Leave the boot in the jig and use the mid-sole mark on the boot to
position the jig on the ski.b) Usethemid-solemarkonthejigtopositionitontheski.c) Not install the binding.d) Position the jig by splitting the difference between the two marks.
6. if there are no manufacturer's recommendations for drill bit selec-tion you should:a) Drill one hole with a 3.6 mm bit and check for metal before switching
to a 4.1 mm bit.b) Drill the ski with the bit in your drill, you can’t go wrong.c) Always use a 4.1 mm bit, all mounting platforms contain metal.d) Usea3.6mmbit,youcanalwaysincreasethetorqueonthescrew-
shooter.
7. when mounting bindings, Salomon's recommendation for tapping is:a) Always tap.b) Never tap. It’s too easy to damage the ski or break the tap.c) Always tap unless the manufacturer cautions against it.d) If you countersink the holes with the drill bit, there is no need to tap.
8. when is the forward pressure correct on the ZZ laB and Sth 12, 14 & 16. a) There’s no need for adjustment it is automatic.b) Place boot in binding and center with mid boot mark.c) When the boot is in the binding and the top of the head screw is
aligned with the back of the heel track. d) When the boot in the binding, adjust DIN number.
It was proposed that some
questionsbechanged…
Binding
certIfIcatIon > exam > 34
technician certification eXaM > (continued)
2008/2009 technician certification exam Questions (continued)
9. when adjusting the toe height on Salomon Quadrax (leisure) bind-ings, you should:a) UseaSalomonrentaladjustmenttoolforthetoeheightscrew.b) Check your adjustment with a Salomon toe height card.c) Answers A & B.d) None of the above; toe height adjustment is automatic.
10. if the forward pressure indicators on the heel are not aligning prop-erly you should:a) Ignore it if they are close.b) Make sure (adjustable) toe wings and toe height are correct.c) Remove the boot and move the heel forward or back to correct.d) Answers B & C.
11. when testing the toe for elastic travel and return, the boot should:a) Move slightly off center then release completely.b) Elastic travel only occurs while skiing and cannot be tested in the
shop.c) Move off center at least 5 mm and return to within 2 mm of its
original position.d) None of the above.
12. what is Skier type?a) The degree of skill a skier possesses.b) A classification system based on “cautious,” “moderate,” or
“aggressive” skiing preferences.c) A person who enjoys skiing.d) Unnecessaryinformation.
13. a five year old is being fitted for her first pair of skis. She weighs 45 lb. what Skier code would you use to help determine the visual indicator setting of her bindings?a) 3/4 b) Ac) B d) -1
14. a skier weighs 160 lb and measures 5’8” tall. he is a type 1 skier who is 53 years old. what is his Skier code on the chart? a) J b) L c) H d) K
15. what should the initial visual indicator setting be for a 220-lb, 6’5’’, type 3+ skier who is 25 years old and uses boots with a sole length of 310 mm?a) Not possible to determine. b) Ask the customer.c) 11 d) 12
16. Skiers requesting personal settings higher or lower than are indicat-ed by the 2008/2009 Salomon adjustment chart should:a) Be asked if they wish to identify themselves as Type 3+ or Type -1
and use the indicated settings.b) Be instructed to adjust their bindings themselves.c) Be given the settings they want provided they sign a Requested
Setting Release Agreement.d) Answer A or C.
17. you are testing a used boot-binding system on a mechanical testing device. the Salomon binding has a visual indicator setting of 7 and the boot sole is 314 mm long. what is the in-use range for twist?a) 67Newtonmeters b) 58to78Nmc) 50 to 91 Nm d) 67to91Nm
18. Mechanical inspections of rental equipment:a) Are required pre-season .b) Are required periodically in-season.c) Ensure that all components are functioning properly.d) All of the above.
19. a mechanical testing device:a) Never needs re-calibration.b) Requires properly trained technicians for consistent results.c) Givesconsistentresultsevenwhenitisoperatedincorrectly.d) Is only used in rental shops.
20. when a skier picks up their equipment from your shop make sure:a) Someoneexplainstheuseoftheequipmenttothemandprovides
themwithsignedcopiesoftheWorkshop/RentalFormandLiabilityRelease Agreement.
b) They speak with the technician who did the installation/adjustment.c) You only hand it over to the intended user.d) You wish them luck.
21. workshop or rental forms must:a) Be used for every transaction.b) Be kept on file for 5 years or for the statute of limitations.c) Be signed by the customer and the Certified Technician.d) All of the above.
22. a post accident Ski equipment inspection report form:a) Is a critical tool in defending liability claims.b) Is only necessary in the case of lower body injuries.c) Must be completed each time an accident is reported.d) Answers A and C.
on-line registration instructionsApplying technicians must complete the 2008/2009 Salomon on-line certification registration and test. Ascoreofatleast90%(20correctanswers)mustbeachievedtopasstheexam.Applyingtechniciansarenot certified until a passing score is achieved.• u.S. dealers will find the on-line cer-
tification registration and test at: http://www.salomoncertification.com
• FortheU.S.,a$12feewillbeinvoicedforeachRegistrationandExamsubmittedonlineat www.salomoncertification.com
• TheU.S.feeis$20foreachRegistration/ExamsubmittedbymailorfaxtoSalomon,or for technicians certified by any approved industry training program.
Fax:(801)334-4502 Salomon Certification/ Customer Service SalomonUSA 2030 Lincoln Ave Ogden,UT84401
• canadian dealers will find the on-line certification registration and test at: http://www.salomonhookup.ca
It was proposed that some
questionsbechanged…
Binding
36
technician certification anSwer forM2008/2009 technician certification answer form
this form is for u.S. dealers only.
Getallyourcertificationneeds at www.salomoncertification.com
fees
Onlinecertificationtest: $12 Faxedormailedtest: $20
technician & Store information
EXAMDATE
STOREACCOUNT#
SHOP PHONE #
TECHNICIAN’S NAME (PRINT CLEARLY)
STORE NAME
STORE ADDRESS
instructions
please print clearly your information above and fax or mail your certification answers to (801) 334-4502.Ascoreof90%,or20correctanswers,mustbeobtainedtopass.Inaddition,questions3to7,10,11,and13to17areconsideredcorequestionsandmustbeansweredcorrectly.
please circle your answer for each question. all answers must be clearly marked. any partially circled answers could be marked incorrect.
answer Section
a b c d
a b c d
a b c d
a b c d
a b c d
a b c d
a b c d
a b c d
a b c d
a b c d
a b c d
a b c d
a b c d
a b c d
a b c d
a b c d
a b c d
a b c d
a b c d
a b c d
a b c d
a b c d
Mail or faX to:Salomon CertificationSalomonU.S.A.2030LincolnAve.,Ogden,UT84401Fax:(801)334-4502Phone: 1 (800) 654-2668 TECHNICIANSSIGNITURE SIGNITUREDATE
Binding
adult Ski length Selection
for the Salomon skis, find the corresponding centimetre length for your weight. add to that number any additional length from the boxes below according to your ability, aggressiveness, the snow conditions you ski most of the time and the kind of skis you want to choose.
kg < 47 48 - 52 53 - 58 59 - 65 66 - 73 74 - 82 83 >
1. Beginner
You are skiing the first week (rental skis)
- 20 cmdiscover firstski sensations
2. interMediate
Able to ski most runs in good conditions
- 5 cmPrefer moderate speeds
3. adVanced
Able to ski all runs in good conditions
+ 0 cmPrefer a varietyof speeds
4. eXpert
Able to ski on all runs in any conditions
+ 5 cmPrefer high speeds
5. SpecialiSt
Able to ski on all runs in changing conditions
+ 10 cmPrefer highest speeds
Most of the time off piste or on soft snowconditions
+ 5 cm
Most of the time on groomed piste or on hard snow conditions
+ 0 cm+
Ski
eQuipe 3V raceeQuipe Sc racedeMo X3 / XtaeroMaX ti / SoriginS eMerald, originS aMethyStteneighty
- 1 cm
Ski
eQuipe 2V raceeQuipe gc race / gc SerieSdeMo X2 / Xraero X / gtcroSSMaX w12X-wingrocker / Xw laB / cZar / lord / gun / duMont /SuSpect / threatScarlet / lady / teMptreSS / MaÏ taÏoriginS, originS Jade, originS opal, originS topaZ,originS cryStal
+ 4 cm
+
terrain
weight
corresponding
Ski length cm 140 cm 145 cm 150 cm 155 cm 160 cm 165 cm 170 cm
leVel
total
This total centimetre length is a guide, your preferred length will be the ski closest to the recommended total.
+
=
kind of Ski
technIcal features > 38Ski/SnowBlade
Child Height 85 to 95 cm 95 to 105 cm 105 to 115 cm 115 to 125 cm 125 to 135 cm 135 to 145 cm 145 to 155 cm 155 to 165 cm 165 to 175 cm
Child Weight* 10 to 14 kg 14 to 18 kg 18 to 22 kg 22 to 26 kg 26 to 30 kg 30 to 37 kg 37 to 45 kg 45 to 55 kg 55 to 65 kg
Approx. Age of Child
Skiing Aptitude
Xw fury Junior XS 788999
Jade Junior XS 554894equipe t XS 888621
3 to 7 years old
Beginner 70 cmTZ5
80 cmTZ5
Intermediate 80 cmTZ5
Good
Xw fury Junior S 788998
Jade Junior S 554893equipe t S 888618
3 to 7 years old
Beginner 90 cmTZ5
100 cmTZ5
110 cmTZ5
Intermediate 90 cmTZ5
100 cmTZ5
110 cmTZ5
Good
Xw fury Junior M 788997
Jade Junior M 554892equipe t M888617
6 to 10 years old
Beginner 120 cmTZ5
130 cmTZ7
Intermediate 120 cmTZ5
130 cmTZ7
Good
120 cmTZ5
130 cmTZ7
Xw fury Junior l 788996
Jade Junior l 554891equipe t l 888616equipe 8 t Steering
plate 100535
8 to 15 years old
Beginner 140 cmLZ7
150 cmZ10Fis20
Intermediate 140 cmLZ7
150 cmZ10Fis20
Good
140 cmLZ7
150 cmZ10Fis20
fish S 720833kitten S 720834
5 to 7 years old
Beginner 105 cmTZ5
115 cmTZ5
Intermediate 105 cmTZ5
115 cmTZ5
Good
fish l 277108kitten l 720832
6 to 12 years old
Beginner 120 cmTZ5
130 cmTZ7
140 cmLZ7
Intermediate 120 cmTZ5
130 cmLZ7
140 cmLZ7
Good 120 cmTZ5
130 cmLZ7
140 cmLZ7
example for fish S: a 6-year-old child weighing 25 kg (and measuring 120 cm), skiing at an intermediate level, must choose a 115 cm ski with a “tZ5” binding.*If weight is over 45 kg (142 Ibs), SALOMON strongly recommend to use an ADULT ski.
Ski length (and binding) according to weight and height of children*
Junior Ski length Selection
Group of Ski Skier Weight (kg)1 greater than 65 kg1, 2 65 kg or less1, 2, 3 45 kg or less(1, 2) 3, 4 25 kg or less
**ExtractfromNFISO8364June2007
recommendations for use of Skis according to the Mass of SkierTo guarantee the sufficient parame-ters of safety (i.e. the resistance of the screws to wrench), skiers must useskis,approximatewithgroups1 to 4, in connection with the mass of the skier**.
technIcal features > 39
Commercial Designation Ref.
SIDECUTS Binding option System Construction Reinforcemnent Core Base Edges Specific features
LENGTH(cm)
Tip
(mm
)
Wai
st (m
m)
Tail
(mm
)
RADIUS(m
)
MID
SOLE
(mm
)
WEIGHT(grby1/2pair)
THICKNESS
Mon
ocoq
ue
ABS
Side
wal
lsEd
gy M
onoc
oque
Carb
on
Tita
nium
Woo
dcor
e
Com
posi
teRa
ce b
ase
finis
hing
Ptex
Wid
er e
dges
Tota
l edg
e re
info
rcem
ent
Edge
arm
orPu
lse
Pad
Elas
tom
er T
T
Rock
er (m
m) Other
raci
ng
Equipe3VRace 890343155160165170
115116117118
65656565
100100100100
11.212
12.513.2
638663690720
1700180019002020
45.446.046.647.2
Z12 Protrak 3D Race T • + 4000 T P Titanium reboundAdultFISnorms
EquipeGCRace 890347154162170178
115115115115
67686970
96979899
12.514.216.118.1
637679735779
1720182019202040
Z12 Protrak Double Full + 4000 P
Equipe SC Race 890351148156164172
118120122124
65656565
99100101102
10.311.312.213.1
623666716754
1610171017501970
Z12 Protrak • T C + 4000 P G1ISOnorm
EquipeGCSeries 890349154162170178
117117117117
66676869
9899100101
11.412.914.816.2
654697740784
1610169017801910
Z10 Smartrak Prolink • C 4000 P G1ISOnorm
Skie
r-X
CrossmaxW12 536052154162170178
115115115115
67686970
96979899
12.514.216.118.1
637679735779
1720182019202040
Z12 Protrak Double C Full 4000 T P
allr
ound
AeroX 890353162170178
115115115
686970
979899
14.216.118.1
679735779
182019202040
Z12 ProtrakMG Double Full 4000 T P Hybrid technology
AeroGT 890357151158165172
114114114114
69707071
95969798
13.014.015.216.9
642680716752
1650175018501950
Z10 Smartrak Prolink 3D Sport T • 4000 P Hybrid technology
AeromaxTi 890359151158165172
114114114114
69707071
95969798
13.014.015.216.9
642680716752
1630173018301930
711 Smartrak Control 3D Sport T C 2000 Hybrid technology
Ski & Snowblade technical reference chart
Ski/SnowBlade
technIcal reference > 40
Commercial Designation Ref.
SIDECUTS Binding option System Construction Reinforcemnent Core Base Edges Specific features
LENGTH(cm)
Tip
(mm
)
Wai
st (m
m)
Tail
(mm
)
RADIUS(m
)
MID
SOLE
(mm
)
WEIGHT(grby1/2pair)
THICKNESS
Mon
ocoq
ue
ABS
Side
wal
lsEd
gy M
onoc
oque
Carb
on
Tita
nium
Woo
dcor
e
Com
posi
teRa
ce b
ase
finis
hing
Ptex
Wid
er e
dges
Tota
l edg
e re
info
rcem
ent
Edge
arm
orPu
lse
Pad
Elas
tom
er T
T
Rock
er (m
m) Other
all-
Mou
ntai
n
XWFury (2 binding options) 890365
163170177184
128128128128
83848586
109110111112
14.916.618.420.4
705743778817
1890200021602310
Z14Z12 Protrak Double Full 4000 T P G1ISOnorm
XWFury (Naked) 890368
163170177184
128128128128
83848586
109110111112
14.916.618.420.4
705743778817
1590170018602010
Double Full 4000 T P G1ISOnorm
XWTornadoTi 868882154162170178
124124124124
73747576
105106107108
11.412.914.516.2
654697740784
1680179019002060
Z14 Protrak • T • 4000 T P G1ISOnorm
XWTornadoTi 890372154162170178
124124124124
73747576
105106107108
11.412.914.516.2
654697740784
1830194020502210
Z14 Lab Powertrak • T • 4000 T P G1ISOnorm
XWTornado 890374154162170178
124124124124
73747576
105106107108
11.412.914.516.2
654697740784
1680179019002060
Z12 Protrak • • 4000 T P G1ISOnorm
XWTornado (Naked) 890371
154162170178
124124124124
73747576
105106107108
11.412.914.516.2
654697740784
1380149016001760
• • 4000 T P G1ISOnorm
XWHurricane 890369164172180
124124124
838587
113114115
15.217.720.4
754797840
195021202290
Z12 Smartrak Control Double • 4000 G1ISOnorm
X-Wing10 890376150158166174
118118118118
71727374
99100101102
11.713.214.916.7
629671714757
1800189019702050
Z10 Smartrak Control • T C 2000 G1ISOnorm
X-Wing8 890378150158166174
118118118118
71727374
99100101102
11.713.214.916.7
629671714757
1800189019702050
711 Smartrak Control • C 2000 G1ISOnorm
X-Wing6 890380154162170178
114115116117
70707070
102103103104
11.712.914.215.4
665705745785
1700182018502040
711 SmartrakGripPlus • T C 2000
X-Wing4 890386
146154162170178
113114115116117
7070707070
102102103103104
10.611.712.914.215.4
625665705745785
14751595171517451935
610 Steering plate • C 2000
woM
en o
rigi
nS
Origins 890388154162170
124124124
737475
105106107
11.412.914.5
662705748
166017201810
Z10 Ti Protrak Double Full 4000 T PHybrid Women
Womenstance(Forwardmounted binding (+ 8 mm))
G1ISOnorm
Origins Jade 890390156164172180
124124124124
81838587
112113114115
13.115.217.720.4
711754797840
1850195021202290
Z10 Ti Smartrak Control Double • 4000Hybrid Women
Womenstance(Forwardmounted binding (+ 8 mm))
G1ISOnorm
Origins Opal 890392146154162170
124124124124
72737475
104105106107
10.111.412.914.5
620662705748
1550166017701880
Z10 Ti Smartrak Control • • 4000 T PHybrid Women
Womenstance(Forwardmounted binding (+ 8 mm))
G1ISOnorm
Origins Amethyst 535376
144151158165172
114114114114114
6969707071
9495969798
12.113.014.015.216.9
612650688724760
15551630173018301930
Z10 Ti Smartrak Control 3D Sport C 2000Hybrid Women
Womenstance(Forwardmounted binding (+ 8 mm))
Origins Topaz 890394140150158166
118118118118
70717273
9899100101
9.611.713.214.9
587637679722
1680180018901970
710Ti Smartrak Control • C 2000Hybrid Women
Womenstance(Forwardmounted binding (+ 8 mm))
G1ISOnorm
Origins Emerald 535378
130140150160165170
108109110111112113
696969696969
919293949596
9.812.013.715.416.016.6
549594639684707729
141015101600170017501800
LZ 9 SmartrakGripPlus • C 2000Hybrid Women
Womenstance(Forwardmounted binding (+ 8 mm))
G1ISOnorm
Origins Crystal 890396
138146154162170
112113114115116
7070707070
101102102103103
9.510.611.712.914.2
593633673713753
14601580170018201850
LZ 9 SmartrakGripPlus • C 2000Hybrid Women
Womenstance(Forwardmounted binding (+ 8 mm))
free
Skiin
g - B
ig M
ount
ain
Rocker 536054 192 147 127 137 48.5 840 2900 • • Full 4000 W T 720 FlatswallowtailG1ISOnorm
Czar 536253166174182
125128131
105108111
115118121
38.340.044.7
745/775780/810816/846
202021202220
Double • Full 4000 W T P • 620 High twin tip tailG1ISOnorm
Lord 536254161169177185
128128128128
85868788
113114115116
13.615.417.419.5
706748791835
1690179018901990
• • Full 4000 T P • 210 Semi twin tip tailG1ISOnorm
Lady 536033153161169177
128128128128
84858687
112113114115
11.913.615.417.4
664706748791
1590169017901890
• • Full 4000 T P • 210 Semi twin tip tailG1ISOnorm
free
Skiin
g - d
ecad
e
Gun 536250164174181188
130130135135
949699101
123124125126
15.518.620.422.2
750/730802/782833/813875/855
1780190021002390
Double C 4000 W T G1ISOnorm
Scarlet 536031154164174
130130130
929496
122123124
12.815.518.6
689/669750/730802/782
178019002100
Double C 4000 W T G1ISOnorm
Temptress 536032151161171
117117117
838383
110110110
11.213.215.4
688/708739/759791/811
134014401540
Double • • 4000 T P • G1ISOnorm
Teneighty 541200151161171181
117117117117
83838383
110110110110
11.213.215.417.5
688/708739/759791/811843/863
1340144015401640
Double • • 4000 T P • G1ISOnorm
free
Skiin
g - p
ark
& p
ipe
Dumont 536251
151161171176181
122122122122122
8686868686
115115115115115
1315.117.318.519.7
692/742742/792792/842817/867842/892
15601650174017901840
• Full 4000 W T
Doub
le
P • G1ISOnorm
Suspect 536255
151161171176181
122122122122122
8686868686
115115115115115
1315.117.318.519.7
692/742742/792792/842817/867842/892
15601650174017901840
• Full 4000 W T A P • G1ISOnorm
Mai Tai 536034151161171176
122122122122
86868686
115115115115
1315.117.318.5
692/742742/792792/842817/867
1560165017401790
• Full 4000 W T A P • G1ISOnorm
Threat 541201151161171176
122122122122
85858585
112112112112
14.216.318.519.6
713/738740/775820/855851/866
1560166017601800
• • C 2000 G1ISOnorm
Ski/SnowBlade
technIcal reference > 41
Commercial Designation Ref.
SIDECUTS Binding option System Construction Reinforcemnent Core Base Edges Specific features
LENGTH(cm)
Tip
(mm
)
Wai
st (m
m)
Tail
(mm
)
RADIUS(m
)
MID
SOLE
(mm
)
WEIGHT(grby1/2pair)
THICKNESS
Mon
ocoq
ue
ABS
Side
wal
lsEd
gy M
onoc
oque
Carb
on
Tita
nium
Woo
dcor
e
Com
posi
teRa
ce b
ase
finis
hing
Ptex
Wid
er e
dges
Tota
l edg
e re
info
rcem
ent
Edge
arm
orPu
lse
Pad
Elas
tom
er T
T
Rock
er (m
m) Other
rent
al a
ll-M
ount
ain
X-Wing800 888600
140150158166174
118118118118118
7071727374
9899100101102
9.611.713.214.916.7
579629671714757
16701790188019602040
SmartrakGripPlus • C 4000 G1ISOnorm
X-Wing500 888608
138146154162170178
112113114115116117
707070707070
101102102103103104
9.510.611.712.914.215.4
585625665705745785
159017101830195019802170
609 SC ITFLoc • C 4000
X-Wing500 304358140150160170
109110111113
69696969
92939496
12.013.715.416.6
586636687740
1510160017001800
SmartrakGrip • C 4000 G1ISOnorm
rent
al or
igins
Origins Amber 500 530875
138146154162170
112113114115116
7070707070
101102102103103
9.510.611.712.914.2
585625665705745
15901710183019501980
609 SC ITFLoc • C 4000Hybrid Women
Womenstance(Forwardmounted binding (+ 8 mm))
rent
al J
unio
r
XWFuryJuniorLRental 554896 140
150107108
6565
8889
13.014.0
585635
14001500 TZ 5 SC Juniortrak • C 1840 G3ISOnorm
XWFuryJuniorLRental 892649 140
150107108
6565
8889
13.014.0
585635
14601560 TZ 5 SC ITFlocJunior • C 1840 G3ISOnorm
XWFuryJuniorMRental 543256 120
130106107
6565
8687
9.511.0
485535
11801300 TZ 5 SC Juniortrak • C 1840 Screw length < 6 mm +/- 0,5
G3ISOnormXWFuryJuniorMRental 892650 120
130106107
6565
8687
9.511.0
485535
12401360 TZ 5 SC ITFlocJunior • C 1840 Screw length < 6 mm +/- 0,5
G3ISOnormXWFuryJuniorSRental 543257 100
110100103
6565
8486
7.07.5
405450
920940 TZ 5 SC Juniortrak • C 1840 Screw length < 6 mm +/- 0,5
G3ISOnormXWFuryJuniorSRental 892656 100
110100103
6565
8486
7.07.5
405450
9801000 TZ 5 SC ITFlocJunior • C 1840 Screw length < 6 mm +/- 0,5
G3ISOnormJade Junior L Rental 487753 140
150107108
6565
8889
13.014.0
585635
14001500 TZ 5 SC Juniortrak • C 1840 G3ISOnorm
Jade Junior L Rental 892660 140
150107108
6565
8889
13.014.0
585635
14601560 TZ 5 SC ITFlocJunior • C 1840 G3ISOnorm
Jade Junior M Rental 487756 120
130106107
6565
8687
9.511.0
485535
11801300 TZ 5 SC Juniortrak • C 1840 Screw length < 6 mm +/- 0,5
G3ISOnormJade Junior M Rental 892662 120
130106107
6565
8687
9.511.0
485535
12401360 TZ 5 SC ITFlocJunior • C 1840 Screw length < 6 mm +/- 0,5
Jade Junior S Rental 487759 100
110100103
6565
8486
7.07.5
405450
920940 TZ 5 SC Juniortrak • C 1840 Screw length < 6 mm +/- 0,5
G3ISOnormJade Junior S Rental 892663 100
110100103
6565
8486
7.07.5
405450
9801000 TZ 5 SC ITFlocJunior • C 1840 Screw length < 6 mm +/- 0,5
G3ISOnorm
Juni
or r
acin
g
EquipeT3VRace 277104 150 114 63 98 10.6 643 1430 48.8 Z14 SmartrakGrip • T Full 2000 P JuniorFISnorm
EquipeT3VRace 277105138144150
110112114
636363
949698
9.710.110.6
588615643
131013701430
47.248.148.8
Z12 SmartrakGrip • T Full 2000 P JuniorFISnorm
EquipeT3VRace 277106132138144
108110112
636363
929496
9.29.710.1
560588615
125013101370
46.547.248.1
Z10 SmartrakGrip • T Full 2000 P JuniorFISnorm
EquipeT3VRace 277107 132 108 63 92 9.2 560 1250 46.5 610 SmartrakGrip • T Full 2000 P JuniorFISnormEquipeT2VRace 530883 170 103 64 87 18.2 747 1825 49.8 Z14 SmartrakGrip • T Full 2000 P JuniorFISnorm
EquipeT2VRace 535081
142149156163170
979999101103
6464646464
8384848687
14.715.317.017.618.2
601638673710747
15451615168517551825
47.347.848.449.049.8
Z12 SmartrakGrip • T Full 2000 P JuniorFISnorm
EquipeT2VRace 535082
135142149156163
95979999101
6464646464
8183848486
14.014.715.317.017.6
567601638673710
14751545161516851755
46.947.347.848.449.0
Z10 SmartrakGrip • T Full 2000 P JuniorFISnorm
EquipeT2VRace 535083 135 95 64 81 14.0 567 1475 46.9 610 SmartrakGrip • T Full 2000 P JuniorFISnorm
Juni
or a
llrou
nd
Equipe T L + Steer-ing plate 100535 140
150107108
6565
8889
13.014.0
585635
12651365 Steering plate • C 1840 G3ISOnorm
Equipe T L 888616 140150
107108
6565
8889
13.014.0
585635
11001200 • C 1840 G3ISOnorm
Equipe T M 888617 120130
106107
6565
8687
9.511.0
485535
8801000 • C 1840 Screw length < 6 mm +/- 0,5
G3ISOnorm
Equipe T S 88861890100110
100100103
656565
838486
5.57.07.5
365405450
530620640
• C 1840 Screw length < 6 mm +/- 0,5G3ISOnorm
EquipeTXS 888621 7080
9196
6565
7579
4.55.0
300330
400440 • C 1840 Screw length < 6 mm +/- 0,5
G3ISOnorm
Juni
or a
ll-M
ount
ain
Jade Junior L 554891 140150
107108
6565
8889
13.014.0
585635
11001200 • C 1840 G3ISOnorm
Jade Junior M 554892 120130
106107
6565
8687
9.511.0
485535
8801000 • C 1840 Screw length < 6 mm +/- 0,5
G3ISOnorm
Jade Junior S 55489390100110
100100103
656565
838486
5.57.07.5
365405450
530620640
• C 1840 Screw length < 6 mm +/- 0,5G3ISOnorm
JadeJuniorXS 554894 7080
9196
6565
7579
4.55.0
300330
400440 • C 1840 Screw length < 6 mm +/- 0,5
G3ISOnorm
XWFuryJuniorL 788996 140150
107108
6565
8889
13.014.0
585635
11001200 • C 1840 G3ISOnorm
XWFuryJuniorM 788997 120130
106107
6565
8687
9.511.0
485535
8801000 • C 1840 Screw length < 6 mm +/- 0,5
G3ISOnorm
XWFuryJuniorS 78899890100110
100100103
656565
838486
5.57.07.5
365405450
530620640
• C 1840 Screw length < 6 mm +/- 0,5G3ISOnorm
XWFuryJuniorXS 788999 7080
9196
6565
7579
4.55.0
300330
400440 • C 1840 Screw length < 6 mm +/- 0,5
G3ISOnorm
Juni
or f
rees
kiin
g FishL 277108120130140
9398105
727274
869097
1113.514.0
495545595
8909951115
• C 1840 Screw length < 6 mm +/- 0,5G3ISOnorm
KittenL 720832120130140
9398105
727274
869097
1113.514.0
495545595
8909951115
• C 1840 Screw length < 6 mm +/- 0,5G3ISOnorm
FishS 720833 105115
9698
6868
8486
9.010.0
480530
705820 • C 1840 Screw length < 6 mm +/- 0,5
G3ISOnorm
KittenS 720834 105115
9698
6868
8486
9.010.0
480530
705820 • C 1840 Screw length < 6 mm +/- 0,5
G3ISOnorm
Ski/SnowBlade
SnowBladewarning
The Snowblade binding mounted on the retail products can accommo-date boot sizes up to 30 Mondopoint (for traditional Alpine boots) and 29 Mondopoint (for specific Snowblade boots).
To allow the Snowblade bind-ings to accommo date sizes up to 34 Mondopoint for the retail binding, Salomon offers a wire bail replace-ment kit.
This kit for large sizes consists of two black wire bails to replace the origi-
nal gray toe bails. This kit is available as a spare part under the reference 891974.
caution: Mounting these specific wire bails for large sizes no longer allows you to use the conversion chart for adjusting the Snowblade binding.
Be careful not to strip the screws when installing the longer bails!
Forthisreason,onlyuseamanualscewdriv er for loosening and tighten-ing the screws.
Snowblade Binding > large sizes compatibility
Snowblade Maintenance & repairs
replacing Snowblade binding toe clips
A. The dealer purchased the Snowblades from Salomon.
B. The dealer has received writ-ten notice of a claim involving Snowblades.
C. The claim alleges use of the Snowblades resulted in injury.
D. The dealer provided instructions recommended by Salomon on the use of the equipment to the purchaser or user.
E. The purchaser or user was ad-vised that the Snowblade sport, like many other recre ational activi-ties, involves inherent and other risks of injury and death, and that:• TheSnowbladebindingisa
non-releasable binding. •Adultsnowblademodels
(85 cm and longer), are not recommended for people less than 5 feet tall (1.5 meters) and especially not for children less than 5 feet tall (1.5 meters).
• TheleashesprovidedwithSnowblades must be worn at all times.
•Snowbladesarenotdesignedfor backcountry or deep snow applications.
F. CustomerswhopurchasedSnowbladesweregiventhein-boxpamphlet and any other informa-tion included in each Snowblade box.
G. Thedealerusesworkshopand/or rental forms the same as, or equivalent to, Salomon forms with currently approved Liability Release Language for Snowblades.
H. A copy of the properly completed workshop form or rental form, including a signed release, is sub-mitted.
I. Any other helpful information such as a Ski Patrol Incident ReportFormissubmitted.
J. The dealer notifies Salomon in writing within ten days of the date on which the dealer first receives written notice of the claim.
K. Thedealercooperatesfullyintheinvestigation, litigation and/or settlement of the claim.
Salomon may terminate indemni-fication, with respect to Salomon Snowblades, upon providing written notice to the dealer.
Salomon offers liability indemnifi ca tion to Salomon Authorized Dealers. Salomon will defend and indem-nify a Salomon Authorized Snowblade Dealer against liabilities from claims presented by any customer of the Authorized Dealer arising solely from the use of Salomon Snowblades, provided:
A S
D F
• Putthetoeclipsintheopenposi-tion by moving the central roller or the adjustment knob without going tothemaximum.fig. A
• Loosenthe4screwsonthefrontpart of the binding using a hand screwdriver. fig. S
• Pullthetoeclipupwardtoliftup the front of the binding about 10 mm, and insert a screwdriver laterally between the board and the toe clip support piece. fig. D
• Stoppullingupwardandnowapplydownward pressure, always act-ing on the same toe clip, so as to unsnap it from its support. fig. F
• Slidethetoeclipforwardandre-move it. fig. G
• Takeholdofthetoeclipforlargesizes and orient the toe clip + lever
unit as to allow for it to be put on in the future. fig. H
• Placethenewtoeclipinitssloton the support and pull it upwards (while holding the front part of the binding to keep it from bending too much) to snap it on. fig. J
• Removethescrewdriver.fig. K• Pressdownhardonthefrontpart
of the binding to make sure it is flat against the board (this procedure helps to make sure the toe clip is in the proper position on its support). fig. L
The toe clip support should be flat against the board.
• Tightenthe4screwswithahandscrew driver using a 2.5 +/- 0.5 Nm torque. fig. :
Followthesameprocedurefortheother binding.
G H
J K
L :
snowblade > 42
the leash must never come in contact with the tuning ma-chines. roll up the leash and wedge it in the center of the binding with the bails closed. Formaintenance,refertoSki Maintenance on page 44.
If for any reason whatsoever you need to dismount and/or remount the Snowblade binding, you must use a manual screwdriver only (2.5 +/- 0.5 Nm torque).
In case of a stripped screw, use the Snowblade repair drill bit (ref. 001090) and the traditional plastic repair plugs (ref. 000846). There is no jig to make this repair. However, the drill bit must be perpendicular to the surface of the ski. Make sure the repair plug is flush with the surface of the ski. If it isn’t, file it down to make it flush.
Snowblade liability indemnification
Be careful: do not use Snowblade® skiboards if you are shorter than 150 cm / 5 feet, and especially if you are a child under that height. retailers and rental operators are obligated to communicate this in-formation to their customers.
Ski/SnowBlade
replacing Snowblade tip protectorsMiniMax - Snowblade 99• Drilltherivetswitha4mmdi-
ameter ‘carbide’ drill bit.• Putonthenewtipprotectorby
align ing the holes with the ones on the blade.
• Insertthemalepartoftherivetin the holes on the base side.
• Putthefemalepartoftherivetin the holes on the top surface side.
• Withmulti-purposepliersoravise, squeeze both parts together
making sure the rivet is flush with the tip protector.
Do not use a hammer for this operation.
• Therivetisinpositionwhenthere is no free play.
SB ten• Loosenthe2screwswithan
alen key ø 4 mm.• Placethenewtipandlineupthe
holes tip with holes of the ski.• Tightenthe2screwswiththe
alen key ø 4 mm (2.5 +/– 0.5 Nm torque).
replacing the Snowblade leash
retail Snowblade binding (Sf214)Tools needed: ruler and Yellow Alpine binding grease (reference 000905 – see spare parts catalog on page 66).1. Remove the defective screw2. Before mounting, put the grease
(reference 000905) on both ends of the new screw.
3. Put the screw in the 2 carriages: be careful not to switch the front and rear carriages in relationship to the screw. (the rear carriage must be on the same side as the alu insert). Tighten the carriages on the screw sufficiently to make the mounting easier. fig. F
4. Mount the screw / carriage unit on the frame of the binding. fig. G
5. Adjusttheaxleoftherearcarriageon the size 330 mm as described below. fig. H
6. Usingaruler,measurethedis-tance between the rear carriage and the plate as described below. This distance must be 5 mm. fig. J
7. Adjust the front carriage by tight-ening/loosening it to get the same carriage/plate distance between front and back. (make sure you don’t change the rear carriage adjust ment during this operation). fig. K
SnowBlade > Mounting, Maintenance & Repair (continued)
Spare part ref. S90405.1. Remove the leash from the bail.2. Put the replacement leash
around the heel bail.3. Put both parts of the rivet in the
holes of the leash.
4. Squeeze both sides of the rivet together onto the leash (with pliers, vise...).
5. The rivet is in place when it no longer turns in the leash.
do not mount the rivet with a hammer.
Storing SnowbladeIfstoringforanextendedlengthoftime, keep the heel bail in a high position to avoid any damage to the plastic parts.
Store them in a dark, dry, venti-lated area.
The Snowblade binding is designed to be used with alpine ski boots. Most Hiking and Snowboar ding boots, whose outsoles conform to the ASTM, DIN, ISO norms, can also be used.
You must clean the Snowblade binding and the boot sole before putting the boot in the binding.
due to their shape (shell width, prominent shape) certain types of boots are not for use with the snowblade binding. in this case, do not uSe the SnowBlade.
Usethescrewlocatedattherearendof the binding to make the adjust-ment. fig. A1. Make the adjustment with a clean
boot and no snow on it.2. Usingapowerscrewdriveror
the drill that you use for mount-ing bindings (4 Nm), separate the bails to allow for the placement of the boot.
3. Put the toe clip in the high posi-tion.
4. Move the bails closer together by putting the lever in a vertical posi-tion. fig. S important: do not put the bails in the riding position,
to prevent the risk of breakage. fig. D
5. Stop tightening the screw once the lever touches the end of the boot sole.
6. check the adjustment with the boot in the binding: you should be able to pull the lever back with moderate pressure (3 daN).
7. Once the adjustment is finished, remove the boot and read the mark indicated on the scale under the boot platform.
8. On the other Snowblade, align the boot platform with the same mark.
9. Check by putting the other boot in the binding.
adjusting Speedfit (rental) Bindings
A S good D Bad
The Snowblade bindings have been designed to accommodate Alpine ski boots.1. Measure the boot sole length
(in mm) with the Synchro mea-surer (Ref. 001189).
2. Move the metal bails by using the central roller or the screw located at the back of the prod-ucts with a manual screwdriver (5-6 Nm torque) to align the axisofthebailwiththegradu-
ation of the plate that corre-sponds to the boot sole length in mm.
3. Check the proper adjustment by placing the boot in the bind-ing (once the lever is closed, it shouldexertpressureonthefront of the boot and the force to open the lever should be about 3 daN; if this is not the case, modify the adjustment).
adjusting Snowblade retail Binding
replacing the adjustment screw
Front carriage
Rear carriage (with leash)
The alu screw insert placed on thesame side as the rear carriage
Grease present
FPut the alu insert in the hole in theframe designed for this purpose
Frame
G
Adjust the rearcarriage axle onsize 330 mm
H5 mm between rear
carriage and plate
PlateCarriageJ
Same distance: 5 mm when the rear carriage is adjusted on size 330
K
snowblade > 43
adjustment
Ski/SnowBlade
D F
F
Maintenance & repairSSki maintenanceGoodskimaintenanceisjustasimportantfortherecreationalskierasfortheracer.Afine-tunedskilastslonger. A well-prepared ski turns better, grips the snow better and glides better on all types of snow.the ski tune-up involves three steps:1. daily check-up - at the end of everyday of skiing.2. Machine tuning - for quick work.3. complete hand tuning - for skier’s specific needs.
• Visuallychecktoseeifanyrusthas developed on the edges.
• Removeanytraceswithfine,220-230 grit sandpaper.
• Ifnecessary,sharpenandpolishedges using sandpaper wrapped around a file.
• CleanthebaseandwaxwithSwixwax.
check-up
Machine tuning
A S
Stone grinding the ski baseSurface Smoothing grinding
Semi finishing grinding
finishing grinding
rotation speed 1000 t/mn
rotation speed 800 to 900 t/mn
rotation speed 400 to 500 t/mn
pressure 2,5 Ski feed speed 10 m/mn
pressure 2,5 Ski feed speed 10 m/mn
Minimum pressureSki feed speed10 - 11 m/mn
dressing Dressing rate 9 - 12 mm/s (depending on the condition of the ski)
dressing Dressing rate 4 - 16 mm/s
dressingDressing rate7-8mm/s
dressing speed Micro automatic (1300t/mn)
dressing speed (1300 t/mn)
dressing speed(1300 t/mn)
ValuesfromWintersteigermachines(Micro81–Micro91)orequivalentma-chines.
Ski tuning on beveled/recessed edgesparameter of the machine
Beveled edge recessed edge
program 1 angle 1° angle 1°Program from Wintersteiger machine (Trim Disc).
a) Surface smoothing– Place the skis on a flat surface.– Eliminateanyexcesspolyethyl-
ene on the base with a hand base plane to decrease the risks of contaminating the stone.
b) Semi finishing– Stone grind until the base be-
comes flat and glossy.– Avoid overheating and use of a
dirty stone (lengthwise streaks on base are from stone contaminant).
– Dress the stone regularly to keep it in good condition (when using a belt grinding machine: use 80 grit belt).
c) finishing fig. S– Stone grind to obtain a fine struc-
ture (when using a belt grinding machine: use 150 grit belt).
– Do not use a dirty stone which creates fluff/hair.
d) Beveled/recessed finishForskiswithbeveled/recessedfinish,
we recommend a straight, fine stone-ground structured base.
note: always make the last run in this direc tion: Tip – Tail. Concerning the machine parame ters, consult the machine manufacturer.
Stone grindingForProlinkskis,installtheBinding-BridgekitaccordingtotheMaintenance Specifics paragraph on page 45.
We recommend grinding the edges with a cup grinding wheel. fig. D• Checktheangleadjustmentbe-
forehand.• Makesurethestonesarewell
lubricated.• Makesuretheedgesarenot
burnt (brown color).• Checkthetuninglengths.
• Smooththeedgesbyhandwitha soft stone (fig. Fa) or Scotch Brite® (fig. Fb)
• Makesureallburrsareremovedand smooth down again, if nec-essary.
for non equiped retailers they can do a classic tuning.
edge finishing
Ski check-up• Visuallychecktodeterminewhatneedstobetuned.• Removemajordeepscratchesonedgeswithwhetstone(seepage 45 for repairing).• Removeanytracesofwaxorgrease.
fill in any holes in the base(see base repairs on page 46)depending on the conditions of the base and materials available:a) Grindentirebasesurface.fig. Ab) Fill-inscratcheswithbaserepairmaterial.c) Repair any large damaged areas with base patch/die.
a
b
maIntenance & rePaIr > 44Ski/SnowBlade
maIntenance & rePaIr > 45
Machine tuning (continued)
G H J
Maintenance & repairS (continued)
lateral finish (fig. G):• Lateralfinishingwithlubricated
220 belt (or use the smallest grit possible).
• Passovertheedges1-2timesdepending on the condition of the edges.
• Adoublesidedsharpenerwillmaintain the ski’s proper side cut.
• Foraperformancepreparation,polish the base edge with a pol-ish ing stone or whetstone to elim i nate any file marks on the edges.
• Removeburrsandpolishedgeswith a lubricated Scotch Brite® belt machine at a slow speed. fig. J
• Becarefultolubricatesufficientlyto avoid burning the base.
• Carefullyremoveallburrswithasoft stone.
• Quicklywipetheskitoavoidstaining from the dried lubricant.
a well-sharpened ski is always sharper underfoot than at the extremities of the ski.
K L :
a) waxing (fig. K)- It’sbesttousemeltedwax.- Clean the base thoroughly.- Make sure the iron is set at the ap-
propriate temperature so that only thewaxismelted.(Temperature110°C+/-5°Cor230°F+/-10°F).
excess heat (above 120 °c or 248°f) can be harmful to both wax and ski, and can even cause permanent loss of glide qualities in the base.- Chooseawaxaccordingtothewax
manu facturer’s recommendations.- Melttheselectedwaxovertheen-
tire length of the base, and let the waxcooltoroomtemperature.
b) Scraping (fig. L)- Removetheexcesswaxwitha
plastic scraper from tip to tail to leave only a very thin layer.
- Removewaxfromthebasegrooveand ski edges as well.
c) Brushing (fig. :)- Brush the base with a nylon brush
(or other type depending on the
structure desired) working from tip to tail.
- A rotating brush removes the struc-ture of the base for good glide. Strap the skis together. Position the straps at the base contact points.
note: The skis can be stored ready-waxed(unscraped)foranextendedperiod of time (e.g. between ski seasons).
toolS:•Waxremover•Ironwiththermostat•Waxapplicator•Plasticscraper•Brush
waxing, scraping and brushing
a true bar is the basic tool for checking and assessing:• skibaseflatness,• thattheedgeisslightlyrecessed
from the base,• theextentofbasescratchesand
appropriate repair. The edge angle checking tool is used to verify that the edge has an angle of 90°.
Ski check-up• Checkthebaseandedgesofyour
skis with a true bar.• Ifrepairsarenecessary,seein-
structions on page 46.
Smoothing the base and edges (fig. D)classic finish: If damage is only mi-nor, use a file to tune ; otherwise the ski must be tuned on a machine.
Beveled/recessed finish: the recommended bevel is between 1° and 1.5°.
edge sharpening (fig. D)• Sharpenbaseedges.• Sharpensideedges.
on classic finish: make sure the edges are at 90°.
on Beveled/recessed finish: make sure that the beveled and recessed edge angle is between 1° and 1.5°.• Roundoffthetipandtailslightly.• Removeanyburrswithsoftstone
or Scotchbrite®.
polishing the edgesPolish the edges with a whetstone, starting first on the base and then the sides.
waxing, scraping and brushingFollowthesameinstructionsasinmachine tuning.
de-tuning the edge angle at the extremitiesimportant: After all finishing op-erations (by hand or machine) it is essential to remove any burrs from edges and to polish the edges to ensure good ski performance.
hand tuning
Pressurized cleaners are prohibited, as well as the following solvents:
› acetone› 95° alcohol(due to risk of damaging the cosmetics of the top surface of the ski).
cleaning the skis > warningtuning skis with prolink on au-tomatically programmable ma-chines and machines with a lead:
To be able to tune skis with the Y andVprolink,wehavedevelopeda specific tuning kit in cooperation with the Wintersteiger company.
This new Prolink adapter can be mounted on the adjustable Wintersteiger bridge (ref. 2000: 7217-0111-V01)andisavailableatWintersteiger under the reference 7217-0111-V05.
Maintenance specifics > prolink adapter
toolS:- Square- 20 cm (8 inch)
file- Whetstone- Soft stone- Scrapers- Brushes
- Scotchbrite®
- Sandpaper (220-320 grit)
- Central hold-ing vise
-Swixwax
Ski/SnowBlade
maIntenance & rePaIr > 46
Maintenance & repairS (continued)
repairing the surface of the ski and snowblade
All the adult and Rental models are protected by the TPP (Transparent Polyamide Protection). Regarding the Junior models, they are protected by TP (Transparent Protection).
The transparent tops cover the cosmetics underneath, which guarantees the durability of the cosmetics.
the tpp top surface Superficial scratchesMachine tuning will make the scratch disappear (see the ski main-tenance repair)
not very deep scratches or marks to be filled by machine- Pour the polyethylene.- Wait 10 minutes for the material
to harden.- Removetheexcesspolyethylene
with a steel spatula for a flat sur-face.
- Proceed with machine tuning.
deep cuts- Cut out the damaged area with the
base patch die.- Cut a piece of the base material
with the base patch die.- Glueitintothedamagedarea.- Hold it in place with a clamp and
press repair (glue the pieces with Loctite® 406 or slow Araldite®).
- Proceed with machine tuning.
Base repairs
KJHG
FDSA
there are two methods for repairing the ski surface:1) ‘One colored’ paste + Araldite®
2) ‘Multi colored’ Araldite® + white + coloring
repair process:1. With a cutter, outline the area
to be repaired, then cut the top surface. fig. A
2. Result after cutting the top sur-face. fig. S
3. With a cutter, score area to re-pair (fibers) to improve bonding. fig. D
4. To protect top surface, put ad-hesive tape around the area to repair. fig. F
5. Prepare Araldite® resin with gun.6. Which type of repair to choose:a) One-color surface repairb) Multicolored surface repair7. Add a small quantity of color-
ing paste to the Araldite® resin. Gentlymix(inordertoavoid
bubbles) to obtain a homo ge-neousmixture.Addasmallquantity of coloring paste (White DW 0131) to the Araldite® resin. White paste is used as a primer in order to have the desired colorsafterwards.Gentlymix(inorder to avoid bubbles) to obtain ahomogeneousmixture.fig. G
8. Apply thicker than top surface of the ski in the areas to be filled. Wait a few moments to eliminate bubbles if necessary. fig. H
9. Put adhesive tape on the area to avoid running. Let it dry for 12 hours. fig. J
10. After 12 hours of drying, remove theadhesivetapefromthemix-ture. Do not remove the adhe-sive tape around the area which protects the top surface from scratches.Usetheflatsideofacuttertoscrapeofftheexcessmixture.fig. K
11. Smooth it down with 600 grain sand paper. Remove the adhe-sive tape. fig. L
12. Finishsandinggentlyinorderto obtain a smooth surface. Be careful of the ski’s decor/cos-metics.
create a decoration13. Forthecoloringstage,donottry
creating tone on tone to create theexactcoloroftheski.Tryingto reproduce a motif of the ski design already present else-where is better and easier. The final layer of Araldite® tends to lighten colors. fig. :
14. UsetheAraldite® gun for a varnish finish which will protect the ski surface from cuts from the edges. A small quantity of Araldite® is sufficient.
15. Apply a fine layer of Araldite® withacuttertoavoidexcessivethickness. fig. ●11
16. Usingadust-freecloth,wipeofftheexcessAraldite® to obtain a smooth, even surface. Let it dry for 30 minutes. The repair is finished. fig. ●12
MaterialS needed:• Araldite® 2011• Araldite® gun 50 ml• Araldite® coloring paste for
smooth color (DW 0131 White, DW0133Red,DW0137Black,DW0132Yellow,DW0134Green,DW 0135 Blue)
•Whitepasteforundercoatingfor decoration (DW 0131 White)
• Feltpentocolorthedesign,type 3 points, permanent (Ref:Pantone87828-color number).
acceSSorieS:• Cutter• Adhesivetape• Towel• Sandpaper,Grain600
L 11: 12
Ski/SnowBlade
Maintenance & repairS (continued)
replacing the tip protector
maIntenance & rePaIr > 47
2007/2008 rental tip protector
“triangle” tip protector (fig. Aa).
“hexagonal” tip protector (fig. Ab).1. Check that the tip protector is on
the right position (Salomon logo on top foil side (fig. S).
2. Set up the tip protector on the lateral groove with a rubber ham-mer (fig. D&F).
3. Set up the tip protector on the central groove (fig. G).
4. Finishthemountingonthesec-ond lateral groove with a rubber hammer (fig. H).
others rental models use rental tip protector range 05
”triangle” tip protector (fig. Ja).
“hexagonal” tip protector (fig. Jb).1. Insert the tip protector on
the ski.2. Place the 2 screws in the 2 holes
face the running base and screw on (1N.m).
A S D
F G H
J
a
b
a
b
repair process:1. Verifythattheskicanbere-
paired.2. Remove the binding and clean
the ski.3. Check the length of the edge to
be replaced. fig. A Cut out the base where the
edge must be changed (10 mm beyond) with the base patch die or cutter (in this case, make a reproducible cut-out). fig. S
4. Cut the 2 sides of edges be-tween two wings with 45° angle, as illustrated.
5. Cut out the edge carefully with cutter or wood chisel, then roughen the area with 80 grit sandpaper. fig. D
6. Cut the new edge, trim it and remove the grease.
7. Place the new edge and screw 2 wings near the tip.
Wedge in place in order to maintain a good profile and keep the edge horizontal. fig. F
8. Applyepoxytoaffectedareaand heat slightly with heat gun, concentrating on each wing.
9. Put plastic over cut out area and insert piece of new base material.
10. Cover the affected area with mold release paper and place ski in heat press. fig. G
11. Whentheepoxyhascured,remove the ski from the heat press and remove base patch and plastic film.
12. Reapplyepoxytotheaffectedarea.
13. Carefully insert piece of base material into cut-out area.
14. Cover affected area with mold release paper and place ski in heat press.
15. Whentheepoxyhascured,remove the ski from the heat press.
16. Grindbaseandedgelocally.17. Plane patch area to obtain
proper geometry with base plane or file.
18. Repair any damage to top layer withamixtureofepoxyandcolorant.
19. Tuneandwaxtheski.
replacing edges
GF
DSA
partS (see page 66)reference # Item Name
S90190 Standard Salomon edges for all skis
MaterialS• screw(wood,1,5x15mm)• epoxy• epoxycolorantormethaneglue• moldreleasepaperorPEfilm• basepatchdie(KTTechnic)• cutter,ruler• scalemodeldrillingmachinewith
cutting disc• narrowscrewdriver• heatgun• woodchisel• repairpress200mmlength• baseplaneWintersteiger,file• beltgrinder• stonegrinder
Removed ski model
compatibilities for tip
protectors
Ski/SnowBlade
technical featureS
Standard Boot norMSStandard Boot Sole dimensions > iSo 5355
in practical terms: The boot manufacturers who display one of the following markings: DIN,ISO,ÖN,UNIguaranteethatthey use standard norms.
In the absence of any of these, check first with the boot manufac-turer. These boots are designed for use with a pair of classic skis, and not with a monoski, snowboard or skiboard.
It is the skier’s own responsibility if (s)he chooses to take the addi-tional risks.
When a pair of used boots is brought in, make sure that any worn parts are still within the norm.
(bottom view)(side view)
(bottom view)
(side view)
The Alpine boot soles are standardized and bindings are designed accordingly. The standard norm concerns not only the shape and dimensions as illustrated, but also the friction coeffi-cient of the area of the sole which is in contact with the anti-friction plate on the binding.
adult boot Junior boota 69 ± 2 62 ± 2B 70 65c 70 50
d* 100 (L < 300 mm) 80 (L < 240 mm)120 (L >= 300 mm) 90 (L >= 240 mm)
e 5 ± 1 3 ± 1f 19 ± 1 16.5 ± 1.5g 30 ± 2 25 ± 2h 30 ± 1 27.5±2i 4 ± 1 3 ± 1
ra 41.5 ± 3.5 35 ± 3rB 18 ± 1.5 16 ± 2rc 37±4 27±3rd 36.25±0.75 34.5 ± 1
legend (measurements in mm)
*L = boot sole length
Boot heel
Boot toe
standards & technIcal features > 49
Boot sole lengths
ModelSMondopoint SiZeS
15 16 17 18 19 20 21 22 22.5
23 23.5
24 24.5
25 25.5
26 26.5
27 27.5
28 28.5
29 29.5
30 30.5
31 31.5
32 33.5
charM 265 274 286 295 307 317 328 338 348
falcon / gun / Scarlet / flyer 265 274 285 295 305 315 326 336
falcon 60 240 247 257 267 277 287 295 307
iMpact / idol / foil / MynX 267 277 287 297 307 317 327 337 347 357
MiSSion / diVine 268 277 288 298 307 317 328 339 350 360
perforMa / irony 267 277 287 298 307 319 329 339 349 359 380
perforMa t3 266 276 285 296 306
perforMa t2 240 240 247 259
perforMa t1 203 203 223 223
Spk 267 277 287 297 307 317 327 337
SyMBio rental 263 275 284 296 306 317 326 336 345
MiSSion rS / diVine rS 268 278 288 298 308 318 328 338 358 358 378
•RemovedElios&Kitten
•Added2Mondopoint
sizestoSPKmodelin
boot sole length chart
•AddedMissionRSand
Divine RS to boot sole
length chart
Boot
salomon foot measurer > 50
SaloMon foot MeaSurer
1. Have your customer take off his/her shoes and make sure that he/she is wearing appropri-ate ski socks (size and thick-ness).
2. With your customer stand-ing up, legs parallel and knees slightly bent, make sure his/her heels and medial side of both feet are touching the sides of the measurer.
3. Slowly move the length guide fig. A until it touches the tip of one foot.
iMportant: When you are moving the black transversal length guide, make sure you don’t put any pressure on the toes when measuring the foot. All you need to do is to barely touch the end of the longest toe. Too much pressure on the toes could lead to errors in reading by a few millimeters.
4. Read the size written vertically where the red line is in the win-dow. fig. S
ForMondopoint,youhavetotakethe width into account in the fol-lowing manner: if the length of the foot measured is situated in this zone, this means the foot measures between 260 mm and
269 mm. Then, to choose between 26.0 and 26.5, you must look at the width scale fig. D (in this case, make it correspond to the maximumfootwidthwithsize26).
A foot that measures 261 mm would fit in size 26.5 (wide foot), whereas a foot that measures 268 mm can fit in size 26.0 (narrow foot). fig. F
note: The increases in Mondopoint sizes represented by two triangles in a rectangle is made to remind you that the boot sole lengths change at the whole sizes, not the half sizes.
remember that the size indicated on the measurer should be used to help the dealer orient the customer towards the proper size.The final choice as to the appropri-ate size should be left to the cus-tomer depending on whether he/she prefers a snug fit or not.
In principle, a technical skier who appreciates a snug fit will choose the size indicated on the measurer, while a ‘recreational’ skier will prefer a roomier fit and will choose one size higher.
procedure
Maintenance recommendationsUseadampclothtocleanthemeasurer.Itisprohibitedtousechemicalagents, hot water, pressurized water, gasoline, alcohol, detergents, sol-vents or aerosols, which could permanently damage the plastic materials and erase the marks.
the new Salomon SidaS MeasurerThis measurer allows measures of:• Length:realMondopoint/frenchsizes/UKsizes/USsizes• Floatingwidthinmmwiththeintegrationofthecos18factortoextrapolatethelengthfirsthead/fifthhead.
• Precision:+/-3mm• Nocare
Salomon developed a foot mea sur er that will help you provide better cus-tomer service by being able to rec-ommend the size that cor re sponds to the dimensions (length and width) of the skier’s feet. however, using the measurer can never re-place trying on a boot.
The volume fit can be measured in two dimensions. The morphology of the foot and physical sensitivity of each individual, according to his/her sports activities and level (comfort/ performance ratio), are also deter-mining factors in the choice of size.
The Salomon measurer can be used for all Salomon footwear products
(Alpine,X-C,Hiking,In-lineskates,Snowboard) and takes into account the two fundamental dimensions of both feet.› The length (main measure ment) :
it can be read directly on 5 inter-nationalsizescales(USmen’s/USwomen’s/UK/EUR/Mondopoint).
› The width in direct correlation with the length measured. The width measurement is partic u larly useful to refine the mea sure ment in Mondopoint because it orients the customer towards the .0 sizes (narrow feet) or .5 sizes (wide feet).
warning
warning, procedure, and recommendations
AS
D
F
Boot
advanced fIt > 51
internal layer for foot hold: Forwarmthandcomfort- Polyurethane(PU),opencellfoam
envelopment, breathability, comfort
HighdensityCustomFitfoamforsupe-rior envelopment.
Middle layer: Forfootenvelopmentand power transmission- ThermoformablePE(CustomFit)orself-moldingPU(Autofit)orpre-formedPE(ThermicFit) suppleness
Transmission foam coming from the Neoprene family for quick reactions.
external layer for contact with the shell: Forpressuredistributionandthermal insulation- Polyethylene, closed cell foam: insu-
lation, warmth, lightness, better fit- PVC(Thermic+Rental):protection,
ruggedness, durability- Sensifit cuff construction for envel-
opment of the leg- Suppleexteriorforcontactwiththe
shell and foot envelopment- Anatomical tongue
adVanced fit technology liner
My customfit world cup: Best performance. Extralowvolume Compact Race liner (3 layers). Specific World Cup tongue allowing shock absorbing.My customfit race: Best performance. Low volume Compact Race liner (3 layers). Rigid sole.My customfit performance: Better comfort on the heel, metas & sole without altering perfor-mance. Two layers liner: thermo-formablefoam80%onallsensitiveareas (heel + metas + sole).
My customfit Sport: Better cus-tomization of the tibia and ankles. One layer liner: thermoformable foam70%onoriginalareas.My customfit comfort: Better tibial customization. One layer liner: thermoformablefoam60%onbasicarea (tongue).
liner Models
thermoforming
women’s specific features
external layerMiddle layer
internal layer
DF
A
S
Women’s liner with anatomic tongues made of highly moldable foams for better shin and instep comfort in sensitive foot zones.A Sliding band
Helps the heel slide in.S Specific tongue
AutofitandCustomFitfoamsforbetter shin and forefoot comfort.
D My customfit performance ForatotalCustomFit.
F polar fleece and/or fur Forefootwarmth.
G therm-ic™
technical description
layer construction
new customfit generation
old customfit generation
Xfit and Biovent
course cf pro / customfit pro: CustomFittechnology+bi-materialtechnology. 100%footholdand contact with the shell. Due to a specific 3 layer performance construction.3d customfit / customfit: Comfort, warmth and ‘customized’ envelopment. Thermoformable foams allow the liner to take on the shape of the foot after a heating procedure is performed with a special machine designed by Salomon. + Thermoformable insole (3DCustomFit)autocf: Automoulding foam in the footenvelopmentforexceptionalcomfort.CustomFittongueforabetter tibial customization.
autofit: Comfort, warmth, insulation and personalized foot envelopment. Self-molding foams allow the liner to take on the shape of the foot allowing anatomical adaptation of the foot’s sensitive areas: the tibia, ankle, forefoot and anklebones.thermicfit: Comfort and warmth- Pre-formed zones protect the tibia
and the forefoot.- A pleasure to slip into due to its
construction and materials.
Xfit active: A comfortable, single layer constructed thermo moldable liner with customizable tongue area for shin comfort and a wide ankle area, positioned at the back of the leg, for heel lock.Xfit advanced: A comfortable, single layer constructed thermo moldable liner with customizable tongue area for shin comfort. The wide ankle area positioned at the back of the leg and metas covers all the critical foot comfort zones.Xfit comfort: A comfortable, single layer constructed thermo moldable liner with a customizable tongue area for shin and ankle comfort.
Biovent: The very first breathable liner in a ski boot to keep feet warm all day. This technology helps regulate body temperature thanks to a multilayer construction inspired from apparel.
S
D
H
GA
FJ
thermoformable zones:A Straight and anatomical
tongue- A thermoformable internal side
that provides precision and comfort.
- Anexternalsidethatismorerigid on the tibia and more sup-pleintheflexareaforexcellentpressure distribution without hinderingflex.
S opened ankle area Foridealmorphologicaladapta-
tion regardless of the size and shape of the bones.
non-thermoformable zones:D asymmetrical and rigid cuff Distributes pressure for instan-
ta neous transmission of efforts.
F watertight gussetG Specific cuts for women and
men to avoid pressure points on the lower calf.
H More supple zones allow for easyentry/exitoftheboot.
J forefoot – The space in front of the metatarsal is not ther-mo formable, which allows the toes to move freely.
Boot
advanced fIt > 52
adVanced fit technology liner > (continued)
thermoforming machine > procedure
SA
FD
1. Remove the machine from its boxandplaceitonaflatsur-face.Verifythatthevoltageused is the same as indicated on the machine.
2. Lift the hood.
3. Lift the nozzles using the han-dles provided.
4. Close the boot’s buckles and slide the boots onto the noz-zles. Make sure that the top edge of the boot touches the obturator.
important: any insoles used other than the ones received in the boots at the time of purchase should be removed before the heating procedure begins. re-install them after heating to mold the liners.
5. After having read and under-stood the machine’s instruc-tions, especially those on safety, you can now plug the machine in.
Set the timer for 15 mins.
warning: Foroptimalresults,itisimportant that:- the heating process lasts 15minutes.Usingthemachinefor more than 15 mins can dam-age the liner.
- operate the machine with both boots in place.
putting the boot on1. when thermoforming, you
should only use ski socks that have the following character-istics:
- socks that go higher than the top of the boot,
- socks with at least 45% wool.
Wearing normal, low-cut socks could cause skin reactions to the heating process.
2. Remove the boots from the ma-chine.
3. Close the hood.4. The machine is now available
for thermoforming another pair of boots.
5. Open the boot buckles.6. The boots must be put on im-
mediately following the end of the 15 min heating cycle.
if you feel any discomfort whatsoever when stepping-in, take your boots off immedi-ately.
7. Closethebuckleswithmediumpressure, not too tight. fig. D
8. Close the strap more firmly.9. Tap the heel on the floor to
make a good impression of the Achilles’ heel. fig. F
10. Wait 10 min in a standing posi-tion.
11. Remove the boots.
practical advice› Salomon recommends that no CustomFitlinerbethermoformedmore than three times.
› To optimize the results of the thermoforming process, it is recommended that you make severalflexmovementsduring
the 10 minute cooling process to simulate the anklebone move-ments when skiing. fig. G
› It is recommended to wait 1/2 hour before skiing with the boots, to allow for complete sta-bilization of the thermoformed liner.
drying with a machine
WhendryingtheCustomFitlinerswith a drying machine, it is im-portant to respect the drying time recommended by the manufacturer and that the temperature not ex-ceed 40°c.
Before using the machine for the first time, return the guarrantee card to your Customer Service Representative.Followtheinstructionsforthethermoformingmachinecloselyandpayparticularattentionto the rules on safety.
To guarantee good thermoforming, we have adapted a thermal sensor to our machines. If something is abnormal during the heating process, the machine will work alternately. If this is the case, contact the cus-tomer service in your country. Do not take the machine apart.
this machine is for exclusive use with Salomon cuStoMfit liners. any other use is forbidden.
preparing for use (fig. A-S)
Starting the machine
G
Boot
advanced fIt > 53
cuStoM Shell technologycustom Shell thermal forming
S
H
F
K
:
A
G
D
J
L
You can use your regular heating tools though they would be less practical than the oven: •heatingelementsfig. K. •gunfig. L. •boilingwaterfig. :.
warning: Kaprolene™hasbeencreated to be deformed by the foot’s natural pressure. Be very careful if you need to use a pushing machine on the Kaprolene™areasandNEVERpushonthesidesareaswhereKaprolene™meetsthePUshell.
can the shell change forms several times? As many times as you want! The wider the foot, the more the shell willexpand.Butitwon’tcomeback…
from what foot width will the custom Shell be useful? In size 26, from last 100 or 102 mm, the customer will feel a real difference. The Custom Shell is also useful for thinner feet in order to reposition the foot even if the change is not measurable on the shell.
what is the maximum width the shell can expand to? Upto6mmwiththepush of the foot only.
what is the advantage compared to normal bootfitting? Here, it is the foot which changes the shell, there is no more risk of misinterpretation, the precision is perfect. Also, this process saves time (30 min. to do everything & the customer leaves with his/her boots) and an easier manipulation (every KOTFcandoit).
Should the custom soles be done be-fore or after? Mold the soles before. The customer should then step in the warmed Custom Shell with the insoles.
Should other areas of the shell be changed before or after? A modifica-tion of the metatarsus’s area can affect thepositioningofthefoot.First,theCustom Shell should be complete. Then, the areas of the toes, ankles, and navicular bone... can be changed as usual, though avoid pushing on the borders of the Custom Shell insert.
can i push in the custom Shell area with my bootfitting machine? Yes, but it is not recommended. Since the Custom Shell material has not been created to resist to a push that is supe-rior the feet’s push, avoid the side areas of the insert.
does the plastic retract the same as normal boots when cooled? Yes, but two times less than normal plastic: ap-proximately25%afterthebootshave
been taken out (a shell pushed out 4mm could come back to 3 mm).
what is the benefit of custom Shell versus the custom fit? Should you do it before or after? The work done on the shell must be done before. This will solve problems and last over time. The molding of the liner must be done after in order to put the finishing touches on the fit.
how do i know when the plastic is warm enough? It is the same process as usual when done with a manual test.
what is the ideal temperature to form the custom Shell? 80°C at core of the plastic.
how many years of r&d did it take to develop the custom Shell technol-ogy? 3 years.
which is the impact of the new mate-rial on the performance of the boot? There is no effect because the mate-rialhasthesamePUbaseasanormal
boot.Theboothasexactlythesamebehavior on snow. On the other hand, once a boot is fit with the Custom Shell, precision is increased.
if a customer wants an injected liner, should it be done before or after? In general, injection is done before work on the shell.
i usually put normal boots in the oven, how is custom Shell different? The normal plastic is going to change very little and comes back to the origi-nal position more often. The deforma-tion is thus quite low.
why is custom Shell not used in world cup? In World Cup races, one person is dedicated to each racer; ev-erything is done by hand and each pair is adapted to each discipline. Then you could say having Custom Shell is like having your own race technician!
We recommend the use of the Sidas bootfitting oven fig. A. Make sure the customer uses only ski socks which go higher than the top of the boot.1. Remove liners from shells.2. Put the shells in the oven with
buckles open fig. S.3. Close the door and start the
machine, set the timer for 10 minutes. warning: Make sure to wear insulated gloves when removing boot shells. Do not allow customers to touch the boot, avoiding possible burns.
4. Switch off the oven and remove the shells.
5. Put liners back in.6. Help the customer to step in fig. D.
7. Closethebootswithminimumtightening (first tooth of the buckle) and make sure the forefoot shell seals stay in the right position. warning: Ask your customer to stand still. Avoid bending or walking with warmed shells.
8. Make sure the shell has been fully deformed before starting the cooling process. (It takes approximately2min).
9. Cool the boots: in cold water for 6 minutes (level of water: above the seal) fig. F. warning: Water level should not be higher than forefoot shell seals to avoid getting liners wet.
- with cold packs for 6 minutes fig. G.
AnewpatentedKaprolene™materialhasbeeninsertedontheshellofthebootnearthemetatarsalarea.Simplyheattheshell,stepinandallowtheshell to form to the contours of the feet. This personalized fit gives unprecedented precision for improved on snow performance.
customization procedure
recommandations for experienced Bootfitters
custom Shell faQ
- in snow for 6 minutes fig. H. - naturally for 20 minutes fig. J.
10. Take boots off, the Custom Shell boot is ready.
Boot
boot technologIes > 54
SaloMon Boot technologieScanting adjustment (with lock)
The Canting is integrated into the shell for reliable transmission and protection. It allows alignment of the cuff to the skier’s lower leg shape.- The factory preset position for the
canting is + 2,5°- First,loosentheinternalandexternalCantingLockwiththeHexagonalKeyn°5.
- To adjust inwards to + 1,5° (a knock kneed stance), turn the externaladjusterone-halfturn.*
- Toadjustexternallyto+3,5°(a bow legged stance), turn the internal adjuster one-half turn.*
- Re-tighten the canting lock.
*note: Never turn both the internal andexternaladjustmentsasthiswillraise the whole cuff without adjusting the canting.
+1.5 +3.5
+2.5
3d Buckle adjustment
The 3D buckle adjustment allows the position of the instep buckle to be changed for personalised foot hold:- Unscrewthebucklewitha3mmHexagonalKey.
- Position the buckle over the plastic lug on the shell.
- Re-tighten in the alternate position.
auto 3d Buckle adjustment
Without using any tools, the Auto 3D buckle adjustment modifies the position of the instep and/or lower leg buckle to personalize foothold:
- Lift the buckle up a- Hold the lock down b- Move the buckle to the desired
position c- Release the lock d
dc
ba
Buckle teeth adjustmentOffers a greater range of lower leg adjustment (+/- 20 mm):- Loosen the screw with a 3 mmHexagonalKey.
- Re-tighten the screw and buckle teeth in the new position.
321
walkadin padsWalking is easy and safe, skiing is compatible with alpine DIN standards.
tool free catches adjustmentUppercatchesarealsoadjustable,withorwithouttools,toadaptthe volume of the upper cuff to your calves.
- To move upper catches, turn them 90°, move them laterally (+ 15mm), then place them back to their horizontal posi-tion.
- To move lower catches, loosen the screw with a 3mm Allen wrench, position the catches in the desired posi-tion (+/- 20mm) and tighten the screw.
extended lever Buckles
Extendedleverbuckles require 30%lesseffortwhen closing.
Micro Buckle adjustment
Finetunethebuckleclosurebyturningthepartthatgripsthebuckleteeth.
Boot
boot concePts > ghost/sPk & ImPact > 55
ghost/Spk
Boot conceptS
technical deScription – ghoSt & Spk Loop to tongue Shin pillow Quicklace 55mm(XXXL)strap Sensifit Toebox Interchangeable rear
and front pads
3D shock absorber PUlowershelland
PP cuff Micro alu overshaped
buckles Extrapaddedspoiler MyCFPROlinerwithfauxfur
Insole rubber grip Absorbing footboard Canting adjustment Canting lock MyCustomFitPerformanceFreeride lace liner
noteNo spare parts available. If needed, please contact the After Sales Service of the subsidiary.
3
A
4
12
5
6
7
9
8
10
11
12
imapct / idol / foil / Mynx
technical deScription – iMpact 10 Sensifit liner wings Wide strap Adjustable buckle
teeth 3D articulated buckle
Walkadin pads Spaceframe shell
profile second skin last and shell
Lower shell and cuff energyzer
Canting Canting lock Micro adjustable
buckle MyCFPro
adjustments and personalization > procedure
for a perfect fit
Sensifit™ (fig. A)A soft material over the instep for improved envelopment and easier step-in.
for a preciSe tranSMiSSion
adjustable rear Spoiler (fig. S)Customisation of the rear support to suit the shape and size of the skier’s leg and increase the rear support:- Loosen the screw with a 5 mm HexagonalKey,
- Choose the height (the higher the spoiler, the stronger the rear sup-port),
- Tighten the screw.
A S
additional featureSwalkadin padsBuckle teeth adjustment3d Buckle adjustmentMicro Buckle adjustmentcanting adjustment54 Salomon Boot Technologies60 Performance Accessories
7
9
S
D
F
H G5
A
8
10
11
3
A
4
1
15
16
8
10
17
1314
Boot
falcon / instinct / gun / Scarlet
Boot conceptS > (continued)
technical deScription – falcon race Anatomical shell
construction like a “second skin”
MyCFRaceSensitiveliner.
Sensifit™ liner wings.
Lower shell and cuff Energyzer
Canting adjustment. Canting Lock. 3Dwide(XXL)strap.
3D buckle. Custom Sole Adjustable buckle
teeth Micro adjustable
buckle
technical deScription – falcon cS pro Anatomical shell
construction like a “second skin”
MyCFRaceSensitiveliner.
Sensifit™ liner wings.
Lower shell and cuff Energyzer
Canting adjustment. Canting Lock. 3Dwide(XXL)strap. 3D buckle.
Custom Sole Adjustable buckle
teeth Micro adjustable
buckle Custom Shell
concePts > falcon/InstInct/gun/scarlet > 56
46
11
9
D
J
:
K
G
2
46
11
9
D
J
:
K
G
1 1
2
falcon kitShin plate (fig. A)
Usedtoreinforcetheforwardsupportandstiffenstheflex.Theheightandlateralposition are adjustable.- Choose the forward or internal position
and use a 5,5 mm drill bit to drill the 1st hole in the cuff where marked (the shin plate is marked by a cross inside the cuff of the boot).
- Choose the desired height and attach the plate using the “T” insert and bolts pro-vided.
- Align the plate correctly and use as a guide to drill the 2nd hole and attach as shown.
rear spoiler (fig. S)The rear spoiler (from the performance kit) increases rear support (with 3 height settings) and forward lean by + 2°.- Choose the desired height and attach
using the screw provided, in the pre-drilled hole.
delta h lift (fig. D)The 4 mm heel lift (from the performance kit) can be used to improve instep/heel hold and put the skiers weight forward for faster initiation. Remove the liner and position the wedge in the hole provided in the rear of the Custom Sole.
Softening the BootEveniftheflexismoreprogressivethanwith tradtional racing boots, it can be soften further more:
reversible Method: Remove the cant-inglockscrews.Thisreducestheflexby5-10%.PlacetheplugsfromtheRacingkit into the screw holes on the outer cuff.
non reversible Method: This involves cuttingthe‘V’inthetoprearofthelowershell and should be performed by your specialized Salomon dealer.
3d strap (fig. F)The internal part of the strap is vertically adjustable.Forthetightnesstobesituatedmore centrally on the tongue, unscrew the screw(position1)witha3mmhexagonalkey and move the insert into the higher hole (position 2). Re-tighten the screw.
FS
adjustments and personalization
D
A
additional featureScustom Sole StandardBuckle teeth adjustmentMicro Buckle adjustment3d Buckle adjustmentcanting adjustment54 Salomon Boot Technologies60 Performance Accessories
12
Boot
Boot conceptS > (continued)
boot concePts > mIssIon & dIvIne > 57
Mission rS / divine rS
Mission / divine
technical deScription – MiSSion 10 rS Loop on tongue Wide strap Tool free catch
adjustment
Spaceframe shell profile second skin last and shell
Pads Canting
Micro adjustable buckles
MyCustomFitProliner Biovent
technical deScription – MiSSion 6 Sensifit liner wings Strap Tool free catch
adjustment 3D sensifit
Pads Wings sole
technology Micro adjustable
buckle
Removable spoiler My Cf Pro
additional featureStool free catches adjustmenttwo extended lever BucklesMicro Buckle adjustment54 Salomon Boot Technologies60 Performance Accessories
adjustments and personalization
adjustments and personalization
for a perfect fit
Sensifit™ fig. A
A soft material over the instep for improved envelopment and easier step-in.
adjustable women spoiler fig. S- To move the spoiler, turn the
screw 180° with a 5mm Allen wrench.
Biovent liner
The very first breathable liner in a ski boot to keep feet warm all day. This technology helps regu-late body temperature thanks to a multilayer construction inspired from apparel.
romavable rear SpoilerYou remove it by clipping
7
A
S
D
F
98
H G5
A S
additional featureStool free catches adjustmenttwo extended lever Bucklescanting adjustmentMicro Buckle adjustment54 Salomon Boot Technologies60 Performance Accessories
7D
8
F G5
H
1
2
Boot
Boot conceptS > (continued)
replacing the lower leg buckle tooth insert1. Remove the liner and open the cuff
completely.2. Drill the rivet inside the shell.3. Remove the damaged buckle tooth
insert and its rivet.4. Put a new buckle tooth insert in
place and proceed as follows : using a t-nut
a. Place the threaded insert in the rivet hole on the inside of the boot.
b. Put the buckle into place and install the screw tightly. The prongs on the threaded insert should be completely imbedded into the cuff material.
c. Loosen the screw.d. Put the washer into place. This
will prevent the tip of the screw from going too far.
e. Tighten completely. using a rivet. Usearivetonthe
outside and a washer inside and proceed with riveting.
replacing the buckle and/or forefoot buckle teeth1. Remove the liner.2. Drill the rivets in the buckle or the
damaged buckle teeth.3. Remove the damaged buckle or the
buckle teeth and the rivet. Save the washer.
4. Put in a new buckle or buckle teeth and attach with a rivet or T-nut.
using a rivet. Useanewrivetandthe original washer and proceed with riveting.
using a t-nut. Put the threaded insert into the rivet hole from the inside of the boot. Put the buckle in place and tighten completely. The prongs on the threaded insert should be completely imbedded in the material.
to remove the linerTurn the clip on the inside of the liner 1/4 turn with a screwdriver.
repairs > procedure
SyMBio 440 Plastic buckles PUShell Replaceable toe
and heel pads Adjustable lower
leg lever Thermic liner Bar code integrated
to the liner
additional featureS60 Performance Accessories
adjustments and personalization > procedure
Alower leg adjustmentIt is possible to change the lower leg adjustment according to the mor-phology of the skier’s lower leg.› adjusting the lower leg cable- Place the lower leg cable in the
desired setting of the buckle teeth on the medial side of the boot. (fig. A)
Longer or shorter cables are avail-able from the spare parts catalog (page 66) to adapt to all shapes and sizes.
Symbio™ rental Model
boot concePts > elIos/charm & symbIo > 58
elios / charm
A
adjustments and personalization > procedure
D F
Skiwalk
S
technical deScription – charM Wide strap Tool free catch
adjustment
Walkadin pads Ski/walk position
Micro adjustable buckle
Warmest liner
adjustable rear spoiler fig. ACustomize the rear support to suit the shape and size of your leg and increase the rear support:- Loosen the screw with a 5mm
Allen wrench.- Choose the height (The higher
the spoiler the stronger the rear support).
- Tighten the screw.
oversize Sensifit™ fig. SThe Oversize Sensifit™, designed with supple material, offers easy entry/exitandanoptimumlevelof comfort.
Ski/walk adjustment fig. D Theeasy-to-useSKI/WALKbut-tonreleasesthecuffforrelaxingand easy walking. (Push the button downfortheWALKposition)
Step in strap fig. FThe Step-in strap offers the possi-bility to put the boot on effortlessly, with only one hand.
additional featureSwalkadin padsBuckle teeth adjustmentMicro Buckle adjustment54 Salomon Boot Technologies60 Performance Accessories
6
4
A
S
3
5
6
4
1
3 32
5
Boot
foot anatoMy and fit
distortion of foot when weighted
a. posterior tarsus1. Calcaneus2. Talus (Astragalus)3. Trochlear surface
B. anterior tarsus4. Navicular bone (Tarsal
Scaphoid)5. Cuboid bone6. 3 cuneiform bones
c. Metatarsus7. 5metatarsalbones
d. toes8. 14 phalanges
notions of anatomyA basic knowledge of anatomy of the foot is essential if you are going to understand and solve your custom-ers’ problems and needs since each foot is unique.
Normal knees. Varus knees. Valgus knees.
types of legs
Some people naturally have varus or valgus knees. The boot cuff follows the profile of the leg. Therefore, the boot sole forms an angle with the ground (i.e.: the ski is not flat).
The ski boots can be adapted to the shape of the leg by canting the cuff.
The canting adjustment by canting the cuff allows the boot to follow the morphology of the leg to keep skis flat
the bones of the foot
When the foot is weighted (standing position), it can change in size:- lengthwise, it can get 5 mm longer,- widthwise, it can get 12 mm wider.
Whenthefootisflexed,wenotice:- the circumference of the ankle in-
creases about 2 mm,
- theaxisbetweenthetalus(astra-galus) and calcaneus becomes off-centered which increases the surface area at the base of the foot.
Therefore, to be accurate, feet should be measured when the person is standing with his/her weight distrib-uted on both feet and knees slightly flexed.
types of feetA deeper analysis of the customer’s feet (fig. F) is necessary to observe the possible deformations that can become problem areas. Salomon has parts (page 66) at your disposal that will help you to easily adapt the boots to these deformations.
high arches:The skier needs an arch support that can relieve pressure on ‘over-loaded’ areas.
Arch supports can be attached to the footboards. (fig. G)
Supinated or pronated feet:This is the deviation of the foot’s verticalaxistowardsthemedialorlateral side, which can lead to prob-lems in the areas of the anklebones, navicular bone or talus.
To adapt to this deviation of the foot, it is possible to place wedges directly on the footboard.
However, this wedge should only be used if the lateral articulation under the ankle bone is mobile. (fig. H)
high instep:Youcangrindthefootboard(FalconandXWave)toincreasethevol-ume. This sole is realized in grind-ablePUfoam.Toincreasethevolume of the boot or to change the position of the foot.
Caution, grind on the top surface only.Grindingthebasewilleffectthe interface with the Chassis. A depth gauge is marked front and back for even grinding. (fig. J)
low instep:The height and inclination of the footboard can be modified by adding:- heel lifts (fig. K)
G H
J K
Pronated Normal Supinated flat foot foot high-arched foot
F
foot anatomy & fIt > notIons of anatomy > 59Boot
foot anatoMy and fit > Recommendations (continued)
* caution: Thebootswhoselowershellsaren’tmadeofPolyurethane(PU)mustnotbestretchedwithheat(thereisariskofdamagingthematerial).Tofindoutwhatthelower shell is made of, see Boot Measurements & Materials chart on page 50).
recommendations & performance accessoriesThe modifications that can be made on the Salomon boots should be considered as the ‘final touch’ of personalization.
Before undertaking this type of operation, it is important to observe certain basic rules:
- Always proceed step by step, starting with temporary measures before going on to permanent changes.
- If you decide to proceed with the permanent modifications as a last resort, they are entirely your responsibility.
They require the proper tools and should be undertaken only for big problemsandbyexperiencedspe-cialists.Forexample:- Stretching the shell.- Grindingtheliner(notrecom-
mended for manufactured liners).- Grindingtheshell.
important: Boots whose lower shell material is not made of Polyurethane(PU),shouldnotbeheated (risk of damaging the ma-terial).
problems, causes & Solutions chartproblems causes Solutions
firSt MetatarSal preSSure(medial side of the forefoot)
Shell too narrow. Prominent first metatarsal.
Solutions all products:› Stick adhesive foam around the first metatarsal on the medial side
of the liner.› Stretch the shell locally with a heat gun* and other tools designed forthispurpose(suchasSIDAS)(exceptSymbioandRearEntry).
X wave, ellipse, performa: Be careful not to overheat the Sensifit or instep gusset of the boot during the heating operation (there is a risk of deforming it due to how thin this part is).
fifth MetatarSal preSSure(lateral side of the forefoot)
Shell (or liner) too narrow. Prominent fifth metatarsal.
Solutions all products:› Remove the insole (increases volume).› Stick adhesive foam around the painful area to dissipate the pressure.› Stretch the shell locally using a heat gun* and other tools designed for thispurpose(suchasSIDAS)(exceptSymbioandRearEntry).
X wave, performa and Verse: Be careful not to overheat the Sensifit or the instep gusset of the boot during the heating operation (there is a risk of deforming it due to how thin this part is).
ankleBone preSSurepain/pressure behind one or both ankle bones.
Prominent medial and lateral ankle bones.
Heel shape.
Solutions for falcon, X wave, performa:
Special precautions are required when stretching the shell:› heat* the inside and outside of the cuff and lower shell simultaneously (so that both will be
at the same temperature despite their different thicknesses and layers),› place the stretching device on the inside, close the boot during the
stretching operation, and proceed with very small successive de-grees of stretching to avoid creating a space between the cuff and the shell.
falcon and X wave:
Be careful not to heat the metal parts (there is a risk of damaging the plastic).
Solutions for rear-entry models:› Remove the insole to increase the volume.› Stick a C-shaped foam pad in the area around the
ankle bones (on the liner).› Remove some foam from the liner in the area
around the ankle bones.› Add shims to blue heel envelopment plate.
foot anatomy & fIt > recommendatIons > 60Boot
foot anatoMy and fit > Recommendations (continued)
problems, causes & Solutions chartproblems causes Solutions
heel preSSure Lack of room in the boot. Prominent cal-caneus(exostosis).
Solutions all products:› Stickachevron(foampadintheformofaninvertedV)abovethe
calcaneus to push the foot forward in the shell and reduce the pressure on the heel.
› ItispossibletoremovesomePUfrombothsidesoftheAchillestendon on the cuff (grinding) and/or on the lower shell (Falcon,XWave,EllipseandPerforma).
heel MoVeMent Verynarrowheel.
Achillestendonaxisvery hollow.
Thin ankle.
Solutions all products:› Stick a chevron above the calcaneus on the liner.› Stick an L-shaped piece of foam under each ankle bone (for bet-
ter grip).› Add a shim to the top of the liner (forward position that pushes
the foot backward in the boot and increases pressure on the heel).
› Useathickerinsole.› Add a shim under the footboard.› Add heel lifts.
inSulation and nuMBneSScold, numb feet.
Poor blood circulation caused by pressure on the blood vessels/ nerves.
Poor foothold distribution (especially with children).
Solutions all products:› Make sure the adjustments are not too tight.› Remove the insoles from the liners.› Add a small arch support and varus wedge (or a shim on the inside of the heel under
the footboard from the performance series).› Grindthefootboard.
craMpSMuscle pain under the arch, in the calf, pressure points, irritations.
Pronounced arch, high instep or flat foot.
Pronated foot.
Thick lower leg.
Solutions all products:› Add or remove the arch support.› Add an insole or propose a custom insole.› Remove all shims under the footboard.› Modify the angle of the forward lean to distribute the skier’s weight differently.› Grindthefootboard.› GrindingtheCustomSole:To increase the volume of the boot or to change the position of the foot. Caution, grind on the top surface only. Grindingthebasewillaffecttheinterfacewiththe Chassis. A depth gauge is marked front and back for even grinding.
Shin Bite Lack of pressure distribution.
falcon:› Add a shin wedge on the cuff (choose the mounting position ac-
cording to the height of the skier).
foot anatomy & fIt > recommendatIons > 61Boot
Salomonchannelledallitsexperi-ence for your protection and plea-sure but don’t lose your head!
Our helmets combine our recognized professionnalism and pure design to create protection for the senses.
Our comprehensive winter sport helmet range meets applicable hel-met standards and uses the unique AdvancedFitTechnologydesignforyour comfort and performance.
Be smart and protect your head in style.
helmets don’t offer absolute protection, so ride within your limits and take care. !
helMet technology
- iMportant: the helmet must always be fastened on the head (chin strap buckled under the chin).
- Check the adjustment and the condi-tion of your helmet before each use.
- Always take care of your helmet, even when not using it. Store it away from any heat source and sunlight (sinceprolongedexposuretothesun weakens all plas tic materials, it is recommended to replace your helmet at least every 3 years). Let it dry in a ventilated area.
- Forcleaningtheoutsidesurfaceoftheskull cap, use soap and water only.
- Do not use any type of gasoline products, solvents or any other chemical substances.
- Do not modify the helmet in any way. Do not varnish it or add any coloring products.
- After receiving an impact, the helmet may be damaged to the point that it is no longer adequate to protect the wearer’s head against further impacts. Even if the damage is not visible, it is necessary to replace the helmet.
instructions for use and maintenance
In order to meet consumer’s needs in terms of safety, head hold and comfort Salomon uses two construction technologies: Standard technology and In Mold technology. Both provide per-formance in terms of resistance, absorption, deflecting impact and resisting penetration.Standard technology: anexternalcap made of ABS combined with an internal cap made of EPS. This technology is commonly used by every helmet manufacturer.
in Mold technology: anexternalPC layer molded together with the EPS cap to provide the best ratio lightness / resistance to the helmet.fit foams: All our models are benefitingfromspecificFitfoamsdisposed on the anatomical areas to increase head comfort.oSfa (fig. S) With this adjust-ment system the helmet is cover-ing several sizes: one helmet for sizes 51-55cm and one helmet for sizes 55-58cm.
My perfect fit
women
A
Standards
roll off dynamic fastening impact test test device test
examples of the main tests of norms:
ce - en 1077 (helmets for alpine skiers*) - tÜV certified.
aStM f2040 (helmets for recre-ational* snow sports).* Non motorized winter sports
all Salomon helmets respect the following standards :
covered areas Visibility measurement measurement
helmet > 63
helmet technical information
warning: for use with Salomon snowsports helmets only. Headphones used in snowsports may cause the skier/rider to not hear other skiers/riders. This can lead to an accident and possible injury or death. Always stay in control. Skiers/Riders downhill from you always have priority, so it's your priority to make sure you avoid them. Headphones will also restrict your ability to hear what your edge/edges are doing on the snow and may distract you. They
may distract you from focusing on skiing or riding safely which may lead to less control.
care and handling: The earpad sound system is built to handle cold, snowy conditions. However, this system is not wa-terproof. Do not submerge the Earpad or cord in water or any other liquid. Do not attempt to clean or to disinfect your helmet with the earpad sound system installed.
Sound System
helMet & pole
helMet technology > (continued)
choosing the right size for your helmet
head Measurer use & Maintenance
warning:Salomon has developed a head mea sur er that will help you to bet-ter serve your customer by being able to recommend the helmet size that corresponds to the circumfer-ence of his/her head.
This measurer can be used for all Salomon Alpine and In Line Skate helmets.
Please remember that the size given by the measurer (centime-ters) should be used only as an indication to help you orient your customer toward the proper size. The final selection of the appropri-ate size should be left to the cus-tomer.
Usingthemeasurershouldneverreplace trying on the helmet.
The helmet is a safety product: it must be chosen in the size that is suitable to its user and be properly positioned on his/her head (the chin strap adjusted in the closed position) to ensure optimum pro-tection, comfort and hold.
recommendations for use:- Loosen the roller (a) to be able
to place the measurer easily on the head.
- Position the measurer on the head according to (fig. H), touching the brow (B) and the occipital bone (c).
Important: Make sure the head-band (d) does not compress the ears, which would affect the measurement.
- Hold the measurer in this posi-tion and turn the roller (a) (rotate it clockwise).
- Turn the roller until it disengages (fig. J).
- Carefully remove the measurer from the head, pulling the rear upward, while maintaining pres-sure on the nose (fig. K).
- Read the measurement on the graduated scale (e) in the win-dow (fig. L).
- Choose the helmet according to the size given by the measurer.
- Try the helmet on. Switch sizes if there is a problem with the fit.
Salomon has provided for stickers that can be put on the head mea-surer for a better understanding of how to use the roller.
Maintenance recommendations:To clean the measurer, you can use a cloth with soap and water.
It is prohibited to use chemi-cal products, hot water or pres-surized water, gasoline, alcohol, detergents, solvents or aerosols that could permanently damage the plastic materials and erase the markings.
warning:Salomon does not cover any dam-age to the head measurer that is a result of transportation, storage or not abiding by the instructions for use or maintenance.
H J K L
choosing your size (see table):The helmet is a safety product.
To ensure optimal protection, comfort and head hold, the helmet must be chosen in the correct size. To choose the correct size, it is nec es sary to measure the cranial perime ter of the head in cm (from the fore head to the most promi-nent back part of the head).
helmet adjustment:The helmet must be properdine positioned on, and adjusted to the user’sheadtoensuremaximumcomfort and protection.
A properly positioned helmet must not be too far forward or back-wards on the user’s head ; the chin strap must always be properly adjusted and in the closed position.
In case of children’s helmets, an adult should always check that the helmet is properly secured.
helmet > 64
51 52 53 54 55 56 57 58 59 60 61 62YOUR SIZE Head perimeter (cm)
adult woMen
Divine Origins, Divine, Icon, Charm, Poison, Venom audio, Venom
adult MenEquipe, Valdez, Impact Blue tooth, X-Wing, Impact, Ranger, Pulse, Patrol Ace, Patrol, Brigade audio, Brigade
JuniorEquipe JR, Jib, Kiana, OSFA System
Equipe Racing, Zoom
S/M (55-58)
XXS (51-55)
XXS (53-54) S (55-56) M (57-58)JR (51-52)
XS* (54-55) M (57-58) XL (60-61)
XXL (61-62)L (58-59)S (55-56)
XXS (53-54)
L (58-59)
M (57-58)
XS (54-55)
S (55-56)
*NotavailableforEquipe,Valdez,X-WingandPulseHelmets
helMet & pole
- Turn the pole upside down with the tip pointing up,- Hold the pole right under the basket,- Your arm will form a right angle (90°) when you have
the ideal size.
choosing a pole sizeUseaclothwithsoapandwatertocleanthepoles.Itisprohibitedtousechemicals, hot water or pressurized water, gasoline, alcohol, detergents, solvents or aerosols that can permanently damage the plastic materials and erase the cosmetics.
Maintenance recommendations
- Spaceframe shaft: specific 3D shapes (wing and AHT) for advanced performance: higher resistance and stiffness.
- Bi-material grip: › hard part for precision, › soft part for comfort.
- Racing grip: specifically de-signed for racers, a closer grip to the pole for higher precision.
- Ultralightfoamgrip:thebestgrip if you need lightness and comfort with or without gloves.
- Gripfit:thegripwiththebestfitand right shapes for less efforts.
- NPS (No Problem Strap): dual side strap, easy to use and with improved comfort.
- Interchangeable baskets: the big one fits off-pists and powder, the small one is more adapted for all other uses.
- Carbide tip: bi-material tip for higher resistance and durability.
Benefits of main technical features
pole technonolgy
Mounting the replaceable baskets > procedure
a) Position the basket according to the two side pins. fig. A&S. Turn the basket 1/4 times to at-tach it.
B) Mounting: at the same time, screw the basket on and push it towards the handle of the pole. fig. D. Removing: at the same time, unscrew the basket and pull it toward the tip of the pole.
c) Screw the basket on completely until you hear four clicks (wear gloves as a precaution). fig. F
Salomon has made 3 types of replaceable baskets available to you:
31 42
- Salomon designed specific poles for rental adapted to a professional and intense use.
- This warranty will not apply for damages resulting of rental use of poles that was not designed specifically for rental.
pole Shaft Materials > technical features
aluminium range- Salomon know-how in alumini-
um is proven with bindings, ILS and Mavic wheels.
- Accordingtothisexperience,wedefined three levels of strength:
aluminium technology by Salomon
HHHHal40%stronger
HHHal15%stronger
HHalCompetitive strength/price ratio
composite range- We do our pole’s shafts the
same way that golf companies do their own golf shafts.
- We defined three levels of Carbon grade:
carbon technology by Salomon
HHHHc45%moreCarbon
HHHc15%moreCarbon
HHcCompetitive stiffness/strength ratio
rental poles
Pole > 65
pole technical information
helMet & pole
Spare partS
alpine Binding 67
SkiS 72
poleS 72
alpine BootS 73
nordic 76
SnowBoard BoardS 77
SnowBoard BindingS 77
SnowBoard BootS 79
footwear 80
contents > 66
This catalogue is for product display only. Salomon reserves the right to modify or discontinue any product. Every product not available in all countries. SALOMON reserves the right to limit or to modify color and/or aesthetic versions of spare parts. These spare parts will nonetheless continue to be distributed in their original functions.All rights reserved. Any reproductions, partial or in full, are prohibited.
Spare partS – contentS
(All prices in U.S. dollars)
Spare partS alPIne bIndIngs > 67
alpine Binding track
1X2Smartrak Prolink + 914 78829401 20.00 $Smartrak Prolink & Smartrak Control + Z12 • Z10 •711 78829501 20.00 $Smartrak Prolink & Smartrak Control + Z12 TI • Z10 TI •710TI 78829601 20.00 $
1X204-05 S912 TI SC • S810TI SC •S712SC•S710TISC•S710SC• C609 SC • C608 SC •C607SC• C509 SC • 06 Z12 TI SC • Z12 SC • Z10 TI SC • Z10 SC •710SC• 609 SC • 608 SC
78378501 9.00 $
1X2 04-05 S305 SC • 06 305 SC • 07KRRTZ5SC • NRR TZ5 SC • 08 NR TZ5 SC • FRTZ5SC 78378701 9.00 $
adjustable toe Base plate1X2 S900 Eq SC 99 • SC 04+: All products •
IFT Free & fast 04+: All SC products 001178 10.00 $
Quadrax toe track1X2 S700•S700SR•S700T•S700TSR•S710•S708TSR•S710SR•S711SR•S710Ti
•S711Pa 78379001 4.75 $
1X2
Z12 TI • Z10 • Z10 TI •Z10FIS20•710• 610 • 609 • 609 SR • 608 •SmartrakGrip+Z12• Z10 • Z10 TI •710TI• 611 • 610 • 609 • 609 TI • WARNING CHANGE THE SCREW FOR: Z10TIAXE+(788314)• 610 CP (000930) • 609 D+ (001101) •607(000896)•607SR(000896)
78829701 4.75 $
Smartrak Prolink & Smartrak Control + Z12 TI • Z12 • Z10 •711•710• Z12 TI SC • Z12 SC • Z10 TI SC • Z10 SC • 609 SC •710SC• 608 SC •ITF:711 78829801 4.75 $
1X2 07 Junior TZ 5 • TZ 5 SR • 08LZ7 54833901 4.75 $
1X2 08 LZ 8 • LZ 9 10061901 4.75 $
position indicator1X2 ITF Free & Fast SC 04+: All products 78385801 4.00 $
Screw / nut1X4 Pilot Sport • Pilot AK Rocket:CrossmaxPilot10/9/8/7•VersePilot10/8 •
AKRocketPilot 00-03 887605 7.25 $
1X4 Pilot Edge Modèle 03CrossmaxPilot10/8 78146101 6.00 $
1X4 Pilot Edge 04+CrossmaxPilot10/8/V12/V10/V8• Equipe Pilot 10 SC/RC/GC• EquipePilot9GC•DemoPilot103V/2V/9 • Rush Pilot 10/7 78389601 7.25 $
1X4 Pilot Freeride: Scrambler Hot Pilot 9/8/7•ScreamAKRocketPilot10Hot/XTRAHot/8 • Siam • Pilot 10/7/5 78146201 18.00 $
central plate1X2 920 LAB • 916 LAB • 914 LAB • 920 ZZ LAB • 916 ZZ LAB • Z920 LAB SS • Z916 LAB SS 78576301 6.00 $
1X2 920 LAB • 916 LAB • 914 LAB • 920 ZZ LAB • 916 ZZ LAB • Z920 LAB SS • Z916 LAB SS 78829901 5.00 $
1X2
Smartrak Prolink/Control + 914 • Z12 • Z10 •711 78833601 9.00 $Smartrak Prolink/Smartrak Control + Z12 TI • Z10 TI •710TI 78833801 13.00 $SmartrakGrip+914• Z12 • Z10 • 611 • 610 • 609 78833901 9.00 $SmartrakGrip+609TI•710TI• Z10 TI 78834001 13.00 $Smartrak Rental 10056601 9.00 $
heel guide or heel track housing1X2 C&S: All products 99- Except:Junior 001173 5.00 $
track1X2 Pilot Retail Ti: All products 78389801 13.00 $
1X2 Flat Ti: All products 78389702 13.00 $
1X2 Smartrak Ti: All products 24729201 28.00 $
how to read the tables04: year 230-308 mm: dimensions (T175): size ##### while quantites last ##### New
Reference Parts Count
(All prices in U.S. dollars)
Spare partS alPIne bIndIngs > 68
lever
1X2 All C&S products • Kaikki C&S • Tuotteet • 99+Except:Junior• Cosmic • Racing • 900 • 850 •700•725• 600 • 509 • 400 78393901 8.00 $
V.i. window
1X2C305 mini (0,50-2,5) 78146701 5.00 $
C305 • S305 • S 305 SC • C 305 SR (0,75-4,5) 78146601 5.00 $
1X2 S710• C610 04- (3,0-10,0) 888484 6.00 $
1X10 C509 • Q500 SR •Q575• Q500 SC • Q500 • C505 Drive+ • C509 SR • C509 SC 04- (2,5-9,0) 001059 10.00 $
S810 Driver Bdg (3,0-10,0) 78582601 18.00 $
S912 Driver Bdg (4,0-12,0) 78582301 18.00 $
anti friction plate1X2 914FIS20• 914 78830001 7.50 $
1X2 Z12 TI • Z12 • Z12 TI SC • Z12 SC • Z10 TI SC • Z10 •710TI•710SC•710•710ITF 78830101 7.50 $
1X2611 • 610 • 610 SC • 610 CP • 609 • 609 Ti/D+ • 609 SC • 608 • 608 SC 78830201 6.00 $
607•607SR 78830301 6.00 $
1X2 914 LAB 78830401 6.75 $
1X2
All S914 models(exceptS914TFis17)• S912 • S910 •S875• S850 • S812 • 811 • S810 •S900EqPoweraxe•S900EqALPoweraxeS900EqAxeplus99 • S900 TI •S900EqFIS• S900 Carbon 99 • S900 Eq AL 99 • S900 Eq SC 99 •S711Ps•S711•S711PiSp•S710Pi Sp SR
887608 13.00 $
1X2 00-05 All C products • Except:C607•C607SR 888134 12.00 $
1X2
Quadrax 600 (sauf Q600 Equalizer) •Q675•Q700SynchroC• Q400 • Q300 • Q300 SR • Q300 Synchro C • Q300 mini • Q500 • Q600 • Q600 Drive Plus 99 •Q600Poweraxe• Q500 SR • Q500 Drive Plus 99 • Q400 SR • Q500 Synchro C (Drive +) •Q725Drive+•Q725Poweraxe•Q575• C509 sr • C509 •C407SR•C407•C305GromSR•C305Grom• Mini Grom• C610
000934 8.00 $
1X2 Allproducts:S700•S712•S710Axe+Pa/Sc/SR •ITFFree&FastTi05- 001076 7.00 $
1X2 S300 • S300 SC • S305 • S305 SC 05- 001134 8.00 $
1X2 Universal AFD (adult & junior boots norms) for: 07 Junior TZ 5 • TZ 5 SR • TZ 5 S 54834001 4.00 $
1X2 Junior Performance AFD (Junior boots norms only) for: 07 Junior TZ 5 • TZ 5 SR • TZ 5 SC 89267001
1X2 Universal AFD (adult & junior boots norms) for: 08 Junior TZ 5 •LZ7• LZ 8 • LZ 9 10056701 4.00 $
1X2 07 STH 12 • 08 STH 14 54834101 8.00 $
1X2 07 STH 16 • 08 STH 14 Driver 54834201 10.00 $
toe housing
1X2
Z12 TI • Z10 • Z10 TI •Z10FIS20•Z10TIAXE+•710• 610 CP • 610 • 609 D+ • 609 • 609 SR • 608 •607•607SR•SmartrakGrip+Z12• Z10 • Z10 TI •710TI• 611 • 610 • 609 • 609 TI • Smartrak Prolink & Smartrak Control + Z12 TI • Z12 • Z10 •711•710
78856001 15.00 $
SC: Z12 TI SC • Z12 SC • Z10 TI SC • Z10 SC • 609 SC •710SC• 608 SC •ITF:711 78856101 13.00 $
Stickers Sets2X10 SC Senior & Junior • Toe Stickers • (@ 1 • @2) 78390301 7.00 $
Brake1X2 Junior SC: Q300 SC • S300 SC • S305 SC • 305 SC 06 887610 12.00 $
1X2Junior SR: Q300 • Q300 SR • S300 • S305 • C305 SR • 305 SR 03-07 • 305 06 887611 10.00 $
Junior mini: Q300 Mini •MiniGrom• 305 mini 06 887609 10.00 $
1X2 Junior: TZ 5 • TZ 5 SR 07 54834301 12.00 $
1X2 Junior: TZ 5 SC • TZ 5 Juniortrak 07 10055301 10.00 $
(All prices in U.S. dollars)
Spare partS alPIne bIndIngs > 69
1X2S920 LAB • S916 LAB • S914 LAB • 920 ZZ LAB • 916 ZZ LAB • 914 ZZ LAB • STH 16 • STH 14 • STH 12
R75 DG X 100: 78575401 R75 L DG X 115: 78576101
R80 DG X 100: 78575501 R90 DG X 100: 78575701
R100 DG X 100: 78575801 R115 DG X 100: 78575901 R130 DG X 100: 78855701
15.00 $—
15.00 $15.00 $15.00 $22.00 $22.00 $
1X2
ALLModelsexceptS920 LAB • S916 LAB • S914 LAB • 920 ZZ LAB • 916 ZZ LAB • 914 ZZ LAB • STH 16 • STH 14 • STH 12 • Junior
B75 DG X 100: 78574501 B80 DG X 100: 78574801 B85 DG X 100: 78574901 B90 DG X 100: 78575001
B100 DG X 100: 78575101B115 DG X 100: 78575201 B130 DG X 100: 78830601
15.00 $15.00 $15.00 $15.00 $18.00 $22.00 $22.00 $
C609 SC on Snowblade B85 G X 100: 78855801 15.00 $
On Pilot EDGE 03-05 skis B75 L DG X 115: 78574701 15.00 $
G = Grip
l
LDG = Double Grip
B 85 G x 100R 100 DG x 100 l L
Jigs
1X1
All Senior products 56-99 mm: 001156 80-123 mm: 001157
100.00 $100.00 $
Q300 • Q300mini • S300 • S305 • C305 •MiniGrom 56-99 mm: 78406101 80.00 $
TZ 5 Juniortrak 56-99 mm: 24729001 80.00 $
Synchro Center+Rental: Junior/Senior 56-99 mm: 001003 80-123 mm: 001040
100.00 $100.00 $
Smartrak prolink • Smartrak Control •SmartrakGrip 70-116 mm: 78840301 100.00 $
5X2Paper jig: Senior fat ski 001023 24.00 $Paper jig: Senior fat rental ski 001024 24.00 $
1X2 Paper jig: Smartrak prolink • Smartrak Control •SmartrakGrip 78830701 5.00 $
tools1X1 Deflex/Hangl&PoweraxeRaceGS:Drillbit Ø 4,6 X L 11,5 mm: 001121 40.00 $
1X5 Drill bit Ø 3,6 X L 8 mm : 000814 Ø 4,1 X L 8 mm: 000813 Ø 4,1 X L 9,5 mm: 000893 Ø 3,6 X L 9,5 mm: 000892
78.00 $78.00 $
1X5 Tap 000816 200.00 $
1X5 Tap brace 000817 30.00 $
1X1 Posidrive bit Fein 7 mm: 000861 18.00 $
1X1 Pilot:Torxbitforelectricscrewdriver Fein 25 mm: 887607 16.00 $
1X1 Posidrive screwdriver 7 mm: 000862 14.00 $
1X1 Adjustement tool 000902 20.00 $
1X2 Pilot & Poweraxe Race GS / Hangl 00: Torxbit 25 mm: 887606 16.00 $
1X1 Double repair kit (2extractordrillbit+70plugs) 000878 129.00 $
1X100 Repair plugs 000846 16.00 $
1X1 Special binding mounting glue 000811 10.00 $
1X100 Plastic plugs Ø 4,5 mm: (white) 000819 (black) 000818(grey) 000822
3.50 $3.50 $
1X1 Tube of grease 000905 5.00 $
1X2 Transparent demoboard + straps 001188 20.00 $
plate kit1X2 Axe Plus • S900 Eq 99 • S900 Eq Alium 99 • S900 Carbon 99 • S850 99 •
S900 Eq Team 99 • S914 • S810 16,5 mm: 001153 20.00 $
1X2 Cosmic&ZAxeplus 15 mm: 78491501 20.00 $
1X2 Snowblade release 78497501 34.00 $
(All prices in U.S. dollars)
Spare partS
8881390188813801
10 x 34,0
10 x 20,5
001102
7838590178831301788314017883220178832801
9 x 10,79 x 34,0
001136001138
10 x 11,8000894
000829
000897
000832
000909
000912
000961
001058
000896
000910
10 x 13,5
10 x 18,8
10 x 23,0
9 x 10,0
9 x 29,0
9 x 8,5
9 x 32,5
9 x 15,0
10 x 16,5
9 x 25,5
000960 9 x 27,0000959 9 x 9,2
00108310 x 19,5001086
9 x 19,5001057
000930 9 x 16,5
000911 9 x 18,0
000830 10 x 15,0
000958 9 x 12,5
9 x 21,0001082
9 x 23,0
8,8 x 14,359 x 17,39 x 26
BN8 4 x 108,8 x 12,7
10115201 8,8 x 12,6
10 x 12
0011019 x 24,0001100
10 x 13,5
10 x 16,510 x 20,5
10 x 23,2
10 x 27,510 x 18,310 x 21,310 x 36,010 x 29,010 x 32,5
10 x 25,0
000834
000899000836
000900
000957001004001018
000908
001085001087001099
RéférenceReference
L
ø
mm : Ø x L mm : Ø x L
Voir tableaux pages suivantes pour les modèles correspondantsSee charts on following pages for the concerned models
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
001153 79491501787169 - 787170
SMARTRAK CONTROL +Z12TI . Z10
78497501 SMARTRAK JUNIOR
001101000912001102001057001083
78831501788317017883200178832501
L
ø
e.g.: 17/ 000900
}
12.00 $15.00 $10.00 $15.00 $10.00 $
8.00 $8.00 $—
8.00 $
13.00 $13.00 $
8.00 $14.00 $15.00 $14.00 $15.00 $15.00 $10.00 $10.00 $10.00 $12.00 $
8.00 $10.00 $13.00 $10.00 $10.00 $13.00 $14.00 $13.00 $15.00 $14.00 $12.00 $
—15.00 $13.00 $15.00 $
—10.00 $10.00 $10.00 $12.00 $12.00 $10.00 $10.00 $12.00 $
8.00 $9.00 $9.00 $8.00 $8.00 $
10.00 $13.00 $
9.00 $
alPIne bIndIngs > 70
Screws (Together column number and reference # = screw positions)
(All prices in U.S. dollars)
Not in european version of this page!
000895
1BOX50SCREWSCNTSUNK13D8
$10.00U.S.
Kike’sAug-11themail
10115201 -> $9.00
Spare partS alPIne bIndIngs > 71
toe (pricesandscrewpositionsonpage70) col./ref.C305Grom• C305 SR •MiniGrom• 305 SR • 305 • 305 mini 06 • Junior TZ 5 & TZ 5 SR 07 • LZ7 • LZ7SR08 2/ 000894S305Grom 2/ 000958S810 Ti Pi Edge • S810 Pi Edge •S914Fis•S912 Ti•S912Fi•S912•S910 Team•S810•S810Ti•S914PiFR•S914Fis24•S914Fis20•S910Fis24• S910Fis20•S912TiPiFR•S810TiPiFR•S914 Pi Edge • S912 Ti Pi Edge •S912Fis20• S812 Pi Edge • S910 Ti 2/ 001057
C610•C509•C509 SR•C608 SR•C608•C608Fis20•C608Fis17•C710• C609 Ti•C609 SR•C609• 3/ 000930S710•S708T•S708TSR•S710SR•S711SR•S710Ti•S710PiFR 2/ 000911S711•S711PiFR 4/ 001082PlaqueAxe+99+ S914•S912 • S811 • S810•S910 T • S810 Ti • S810 CP • S912 Ti • S810 SR 3/ 000912S710Axe+•S708T•S710CP•S710TiCP•S711CP 1/ 000960C610Axe+•C608 CP • C610 CP •C710CP•C710TiCP 4/ 001083Plaque Drive+ 500 • 600 • C509 Drive+ • C609 Drive+ 4/ 001101S305 SC 8/ 000961 6/ 000958Junior TZ 5 SC 07 8/ 000961 9/ 000958 3/ 000894S912 Ti SC • 810 SC • S 810 Ti SC 3/ 000911 5/ 000909S710SC•S711SC•S712SC•S710TiSC 6/ 000930 5/ 000909 6/ 001057C509 SC•C608 SC•C609 SC 6/ 000930 6/ 000911 5/ 000909LZ 8 SC 08 5/ 000909 12/ 000958 9/ 000829920 LAB • 916 LAB • 914 LAB • 920 ZZ LAB•916 ZZ LAB • Z920 LAB SS • Z916 LAB SS 16/ 001101 16/ 001082PilotS710Cosmic 4/ 001082S920 • S916 •S914Fis17• S920 Race • STH 16 07 4/ 000910 4/ 000911LZ 8 • LZ 9 08 7/ 000895C607SR•C607 4/ 78385901S914Fis26,3•S910Fis26,3 3/ 001101Z12 Ti SC • Z12 SC • Z10 Ti SC • Z10 SC •710SC• 609 SC • 608 SC 06 5/ 000909 6/ 000930 6/ 001057Z12 Ti • Z10 Ti •Z10Fis20•710• 610 • 609 • 609 Ti • 609 SR 608 06 • SmartrakGrip+610,611,710Ti,Z10Ti,Z10,Z12,609,609Ti06 • Z14 08 6/ 000930 6/ 78831301
Z12TiAXE+• 610 CP 06 2/ 000960 2/ 78831401609 D+ 06 1/ 001100 1/ 001101914Fis20• 914 •SmartrakGrip+91406 1/ 000930 1/ 78831301SmartrakProlink&SmartrakControl+914,Z12Ti,Z12,Z10Ti,Z10,711,710Ti06 • Z14 08 1/ 78832201Smartrak Prolink + 914 06 1/ 78832801SmartrakProlink&SmartrakControl+Z12Ti,Z12,Z10Ti,Z10,711,710Ti06 • Z14 08 2/ 10115201STH 12 07 • STH 14 • Z14 LAB 08 6/ 000930 6/ 000911STH 14 Driver 08 3/ 000911
Brake (pricesandscrewpositionsonpage70) col./ref.Brake 5/ 000829
heel (pricesandscrewpositionsonpage70) col./ref.Pilot Edge Loc SC: S912 Ti Pi Edge • S810 Ti Pi Edge 17/ 000830 17/ 000829 17/ 000900Pilot Free Ride Loc SC: S912TiPiFR•S810TiPiFR•S711PiFR 17/ 001086 5/ 000957C305Grom• C305 SR •MiniGrom• 305 SR • 305 • 305 Mini 06 2/ 000834 2/ 000899S305Grom 8/ 001004 11/ 001018S914Fis17• 914 • Z12 TI • Z10 TI • Z10 •710• 610 • 609 • 608 06 •C608Fis17•S710• S608 • C610 • C509 • C608 •C710•S710Ti• C609 Ti • C609 • Z14 & Z12 08 • LZ 8 08 • LZ 9 08 11/ 000894 11/ 001004
609 SR 06•S710SR•S711SR•S708TSR• C509 SR • C608 SR • C609 SR 1/ 000894 1/ 000836S912 Ti • S912 • S810 •S711• S910 T • S810 TI •S914Fis24•S910Fis24 3/ 000897 6/ 000957C608Fis20•914Fis•S914PiFR•S912TiPiFR•S810TiPiFR•S914 Pi Edge •914FIS20•Z10FIS2006• S810 Ti Pi Edge•S810 Pi Edge•S912 Ti Pi Edge•S812 Pi Edge•S912Fis20•S914Fis20•S910Fis20 11/ 000830 11/ 000900
PlaqueAxe+99+ S850 • S914 • S912 • S811 • S810 •S710•S711CP• S912 Ti •Z10TIAXE+• 610 CP 06• S608 T • C610 • S910 T • C608 CP • C610 CP •C710CP•S710CP• S810 CP •C710TiCP 11/ 001101 11/ 001102
Plaque Drive + • C509 Drive + • 609 D + 06 11/ 000911 11/ 000908
S305 SC • 305 SC 06 6/ 000957 11/ 001099
S850 SC (Drive+) • C608 SC • C609 SC • S912 Ti SC•S810 SC•S810 S •S712S•S711SC•S710S•C509 SC • S810 Ti SC • All SC 02+ 9/ 001083 9/ 001102920 LAB • 916 LAB • 914 LAB•920 ZZ LAB • 916 ZZ LAB•Z920 LAB SS • Z916 LAB SS 16/ 001100 16/ 001138 16/ 000897S920 • S916 • STH 12 & 16 07 • STH Driver 14 08 • STH 14 08 • Z14 LAB 08 4/ 000897 4/ 000829 4/ 000912C607SC 17/ 001100 17/ 001102C607SR•607SR06 • LZ7SR08 17/ 000909 17/ 001004
C607•60706 • LZ708 2/ 000899 2/ 000909S914Fis26,3•S910Fis26,3 7/ 888139 7/ 001087
Z12 TI SC • Z12 SC • Z10 TI SC • Z10 SC •710SC•609 SC • 608 SC 06 • LZ8 SC 08 1/ 001085 2/ 001083
Smartrak Prolink & Smartrak Control + 914 • Z12 TI • Z12 • Z10 TI • Z10 •711•710TI06 • Z14 08 1/ 78832201Junior TZ 5 & TZ 5 SR 07 11/ 000896 2/ 000899Junior TZ 5 Juniortrak 07 11/ 000908 11/ 001101Junior TZ 5 SC 07 11/ 001099 11/ 000912
interface (pricesandscrewpositionsonpage70) col./ref.PoweraxeRaceGS01+ • Pilot Race 04•PoweraxeRaceSL00+ 5/ 000909 1/ 001086 7/ 000911Snowblade Release •78497501 1/ 001057Z12 TI Smartrak • Z10 Smartrak 06•Smartrak Control + Z12 TI • Z10 06 • Z14 08 78832501 78831501 78831701Smartrak Junior 06 78832501
Spare partS alPIne skIs > 72
SkiS tips
1X2
Verse9 00-02 •Verse7 00-02 •Verse7w 01-02 •Verse10Pilot 01-03 •Verse8Pilot02-03 •Verse8wPilot02-03-Verse8XPilot 02-03 •Verse8XwPilot 02-03 • Scream 10 Pilot 00-02 • Scream 8.9 Pilot 00 •Superaxe10Pilot 00 • Scream 8 Pilot 00-02 • Seventwenty 00-02 • Scream 10 Pilot 01 • Scream 8 Pilot M-W 01 • Seventwenty 01 • Teneighty 01 •X-ScreamSeries01-04 •X-ScreamM-W 01-03 •X-Scream9US 01-02 •X-ScreamS 02 • Scream Classic 04 •Equipe103V 05
891970 10.00 $
1X2 Verse5 00-02 •Verse5Lite 00 •Verse5w01-02 •Verse50000-02 •Verse6 00-02 •Verse5.500-02 •X-Scream70002 891456 10.00 $
1X2
Crossmax8PilotM-W 01 •Crossmax9Pilot01 •Crossmax9US02-03 •CrossmaxCarve•Crossmax10Pilot 01 •Equipe103V 01 • Demo 8 Pilot 01 •Demo103V 01 • Demo 10 Pilot 01 • Equipe 10 RC 01-02 •Equipe102V 01 •Equipe82V01-02-Equipe83V01 •Equipe10T2V 01-03 •Equipe10T3V 01-02 •Crossmax70001 •Crossmax7.X 01 •Crossmax7.5 01 •Crossmax8 01 •Crossmax8.X01 •Crossmax7 01 •Equipe7.9 01
891971 14.00 $
1X2
Crossmax10Pilot02 •Crossmax9Pilot 02-03 •Crossmax8Pilot M-W 02-03 •Demo83VPilot02-03 • Demo 103VPilot02 •Demo93VPilot02-03 • Equipe SC 02-03 •Equipe83V 02-04 •Equipe103V 02-04 •Crossmax7Pilot 02-03 •Crossmax7.5Pilot 02-03 •Crossmax7XPilot02-03 •Crossmax8XPilot 02-03 • Cleaver 02 • Equipe 10 RC 03
89249001 10.00 $
1X2Crossmax8 02 •Crossmax88 03 •Crossmax8.903 •Crossmax800 02 •Crossmax7 02 •Crossmax7703 • Crossmax700 02 •Crossmax8X 02 •Crossmax7X 02 •CrossmaxTX03 •Crossmax7.502 •Crossmax7.9 03 • Crossmax6603 • Scleaver 8 03 • Scleaver 8.9 03 •Scleaver7 03 •Scleaver7.903 •Equipe7C 03
89249101 10.00 $
1X2 Verse8500 00-03 •Verse590 03 •X-Scream70001-02 •Crossmax70001-04 •Scleaver790 03 • Scrambler 400 04 89249201 10.00 $
1X2Crossmax10PilotRental01-02 •Crossmax8PilotRental 01-03 •Crossmax7PilotRental01-03 •Scleaver7.9Pilot Rental 03 •Verse10PilotRental01-03 •Crossmax7TXPilotRental 03 •Verse8PilotRental02 • Scream 10 Pilot Rental 01-02
89249301 10.00 $
1X2Equipe SC •EquipeGC•Equipe9GC•Demo103V•Demo102V• Demo9 • Demo8 • •Demo Lady •CrossmaxV12•CrossmaxV10• Rush n°10 •Rushn°7•Rush700• •Streetracer 10 • Streetrace r8 •Streetracer7• Streetracer 6, 600, 800 05-06 • •Rush 6, 600, 800 05-06 •Equipe10T3V 05-06 • Demo Lady 06
78570801 8.00 $
1X2Scrambler Hot • Scrambler 9 • Scrambler 8 •Scrambler7• Scrambler 6 • Scrambler 5 • Scrambler Custom • Scrambler700• Scrambler 400 • Siam n°10 •Siamn°7•XW5,6,8•400,70006 •XWFury• Hurricane 06 • Siam n°5, 400 05-06 •Axess 06
78571001 10.00 $
1X2 Crossmax10Pilot 03-04 •Crossmax9Pilot 04 •Crossmax8Pilot 04 • Teneighty 02-04 • Scream 10 Hot 03-04 • Scream10XtraHot 03-04 78325101 10.00 $
1X2Scrambler700 04 •Scrambler700W04 • Scrambler 1200 Rental 04 •Scrambler7PilotW 04 •Scrambler7TXPilotRental04 • Scrambler 8 Pilot Rental 04 • Streetracer 880 04 • Streetracer 800 04 • Streetracer 600 04 • Equipe 10 SC Pilot Rental 04
78376201 14.00 $
1X2
EquipeGC • GCRace • GCSeries • SC,SCRace,3V • Streetracer8,10,800,80,8TX,Sport • DemoX2V,X3V,XR,XT • CrossmaxV8,V10,V12,V800 • 9000 replica 06Equipe3V,GCSeries,GCRace,SCRace • AeroGT,X • DemoX3,XR,XT,GTX • CrossmaxV8,V10,V800,W12 • XWCyclone,Typhoon07EquipeGC,GCSeries,SCRace,RC • AeroGTR,GT,XSI • AeromaxTi,STi • DemoXR,XT • CrossmaxV10 • Origins Amethyst, Amethyst 800 08
78799401 6.00 $
1X2
XW3,4,4Tx,10 • SiamN3,N4,N8,N10,N40,Flirt,Origins,Sinsation • XWBlast,Tornado,Sandstorm,Vector,AT,XRadiant06XW4,6,800,X3,X7,Attack,Tx,STX,Vector,Tornado,Fury,Sandstorm,Storm • Jewel Amber, Crystal, Diadem, Opal, Origins, Pearl, Topaz - Demo lady 07XW4,6,8,10,500,800,X7,X9,Fire,Cyclone,Hurricane • Origins Amber, Amber 500, Pearl, Ruby, Diadem, Crystal, Jade, Opal,Topaz • Demo lady 08
78799501 6.00 $
1X2 Equipe2VRace07 • DemoX2,Ti,RT07 • XWing50007-08 • AeroTi,S,RT,GTI,TiRental,SRental07 • Jewel Amber 500 07 • InstinctFever50007 • AeromaxRT,SR,GTS08 24729101 8.00 $
1X2 XWFury08 • XWTornado,TornadoTi08 10077101 15.00 $
1X2 CrossmaxW1208 • Equipe3VRace,2VRace,GCRace08 • AeroX08 • DemoX2,DemoX308 10077201 15.00 $
edges (25cm)1X2 Forallmodels S90190 6.00 $
Base Material (50cm)1X1 Forallmodels S90158 8.00 $
poleS Baskets kit
2X2 Aluminium (Ø60 x 1 • Ø80 x 1): Pocket Rocket 02-03 •Uluwatu02 Ø 60/80 mm 89917701 6.00 $
1X2 Composite (Ø50 x 1 • Ø80 x 1): Teahuppo 02 • Scream 03 • Teneighty 04-05 • Scream 04 • Rental composite 04-05 • Scrambler hot 05 • Echelon 05 Ø 50/80 mm 89917801 6.00 $
1X2 Telescopic (Ø60 x 1 • Ø90 x 1):X-AdventureRaid 02-03 Ø 60/90 mm 89917901 6.00 $
1X1 Aluminium: RacingGiant 02 • Racing Downhill 02 • Equipe 04-05 Ø 52 mm 89917501 6.00 $
1X2 Aluminium: Equipe 06 •Crossmax06 Ø 50 mm 78864301 6.00 $
(All prices in U.S. dollars)
Spare partS Poles > 73
Baskets
1X2Aluminium:Expert•MLX• Evolution • Lite •Force•Axendo• Equipe 99-03 •X-Scream 99-00 •X-Free 99 •Crossmax01-02 • Pocket Rocket 01 • Tantrum 02 • Scarecrow 01 • Teneighty 03 • Crossmax1003 • Composite: Teneighty 01 •X-Scream 01 •HoochieGlide 02
Ø 60 mm A02546 6.00 $
1X2 Carbon: Carbon (99) • Pilot 00-01Telescopic: Raid 00-01 • Raid Carbon 02 Ø 60 mm A05504 6.00 $
1X2 Aluminium:Verse00-02 • Junior 00-04 • Northpole 01-05 • Adjustable 02 • Rental 02-05 •Crossmax 03-05 • Scrambler 03-05 • Arctic 04-05 • Racer 04-05 •Kaloo 05 •F105 • Rush 05 • Siam 05 Ø 60 mm 898139 5.00 $
1X2Aluminium:Verse00-02 • Junior 00-04 • Northpole 01-05 • Adjustable 02 • Rental 02-06 •Crossmax 03-05 • Scrambler 03-05 • Arctic 04-06 • Definition (04) • Allium (04>06) • Racer 04-06 •Kaloo 05-06 •F105-06 • Rush 05 • Siam 05 • Arctic women 06 •Xwing 06 • Cosmic 06 • Teneighty 06
Ø 50 mm 78864201 5.00 $
1X2 Aluminium: North Pole 06 Ø 50 mm 78864401 5.00 $
1X2 Composite: Rental 01-03 •X-ScreamFrance01 Ø 60 mm 898262 5.00 $
1X2 X-Mountain 02-03 •X-AdventureAccess 02-03 Ø 70 mm 89917601 5.00 $
1X2 X-AdventureRaid140 01 •X-AdventureRaid160 01 •X-AdventureAccess 01 Ø 100 mm 898264 10.00 $
alpine BootS Buckle tooth insert
1X2 Xwave&Rush• Falcon&Instinct • Impact & Idol (collier/collar) 78858201 6.00 $
1X2 Xwave&Rush• Falcon&Instinct • Impact & Idol 78858301 6.00 $
1X2 Performa & Irony 06-07+(X-wave8-Rush880-Ellipse&Siam770) 78593001 8.00 $
1X2 Performa & Irony • Elios & Charm • Mission & Divine 99493501 5.00 $
1X2 Performa & Irony • Mission & Divine 78399601 8.00 $
Buckle (M*=Micro•V*=Vario)M*1X2
Course • 1080 Pro Model •Performa9.0CourseAxe•PerformaCourseX-ScreamCourseTopFit• Pro Model • Pro Model Spaceframe • Pro Model Sc Spaceframe S: 78398501 L: 78398401 18.00 $
M*1X2
Course • 1080 Pro Model •Performa9.0CourseAxe•PerformaCourseX-Scream• CourseTopFit• Pro Model • Pro Model Spaceframe • Pro Model Sc Spaceframe (red) M: 78398601 18.00 $
M* 1X2 Xwave&Rush•Falcon&Instinct• Impact & Idol L: 10077401 18.00 $
M* 1X2 Xwave&Rush•Falcon&Instinct• Impact & Idol S: 10077501 M: 10077601 18.00 $
V*M*1X2
Evolution²: 6.99 (M&W) • 5.99 (M&W) S: 78587701 L: 78587501 M: 78587601
12.00 $14.00 $14.00 $
V*1X1 Symbio: 500 • 440 S: 78396901 L: 78397001 7.00 $
V*1X2 Performa T Small • Performa T4 Small • Performa T2 • Course 60 S: 78588301 L: 78588201 —
1X2 15 Mini • Performa T1 (blue) 16.0-18.0: 10077701 14.00 $
M*M*1X1
Performa 99CustomFit(M&W)• 6.0/5.0/5.8/5.X/5.5 (M&W)Performa 00 6.0/5.0/4.0/660 • Performa T Large • 4.5/5.5/5.X/5.S/4.SPerforma 01 6.0/5.0/4.0/660 • Performa T Large • 5.5/5.9/4.9/5.X/RS 4
S: 490544 L: 490543 10.00 $
M*1X1
Performa 02 6.0/5.0/4.0/6.9CF/5.5/5.95/4.95/RS4/660 (M&W) • Performa T 4 Large•Performa 03 6.0/5.0/4.0 (M&W) • T4 L/4TX/5.99/4.99/RS4 • 660 (M&W) • Performa & Irony 05 500 (black/grey)
S: 882852 L: 882853 10.00 $
V*1X1 Evolution 5.0 (M&W) • 4.0 (M&W) • 600 • 5.5 (M&W) • 5.55 (M&W) S: 882380 L: 882379 8.00 $
M*1X2
Performa 06 8.0 •CF7• Irony 06 8 • Mission • Divine •Elios7-6•X6• degree • Charm7• 6 •X6• halo S: 78861401 L: 78861501 12.00 $
M*1X2
Performa 06 (3D): 8.0 •CF7• Irony 06 8 • Mission • Divine •Elios7-6•X6• degree • Charm7• 6 •X6• Halo (red) M: 78861601 12.00 $
V*M*1X2
Performa 06 4 • 074,X4,PF3,Pulse• Irony 06 4 • 074,X4,PF3,Breeze• Elios 4, 500 • Charm 4, 500b (blue/grey)
S: 78862101 M: 78862301 L: 78862501 13.00 $
V* Symbio: 4.0 (M&W) • 500 • 6.0 (M&W) 97 • 440 • Optima Ultra Light: 8.6/7.6(M&W)• 7.6W•7.2/6.6/6.2/5.6/5.2/4.6 (M&W) • 4.6W • 4.2/520 (M&W)
540 mm / 22.0-25.5: 882844560 mm / 26.0-30.0: 882845
580 mm / 78862701
12.00 $12.00 $13.00 $
M*1X2 Impact Idol •FalconCSPro08 M: 99492601 22.00 $
M*1X2
Performa 07 5,X5• Irony 07 5,X5• Elios TXCharmTX S: 99492701 L: 99492801 M: 99492901 15.00 $
V*1X2 Performa 07 TX,GS• Irony 07 GS S: 99493001 L: 99493101 M: 99493201 12.00 $
V*1X2 T2 • T3 •Falcon60/70•Flyer•Kitten S: 99493301 L: 99493401 12.00 $
(All prices in U.S. dollars)
Need price
S: 78588301 L: 78588201
Spare partS alPIne boots > 74
innerboot
1X2 Thermic Fit: Ellipse
22.0W: 78141719 23.5W: 78141722 24.5W: 78141724 25.5W: 78141726 70.00 $
26.5: 78141829 27.5: 78141831 28.5: 78141833 29.5: 78141836 30.5: 78141838 31.5: 78141841 76.00 $
1X2 My Custom Fit Race: Falcon• Instinct
22.0: 78860919 23.5: 78860922 24.5: 78860924 25.5: 78860926 85.00 $
26.5: 78860929 27.5: 78860831 28.5: 78860833 29.5: 78860836 90.00 $
1X2 My Custom Fit Race: X-Wave&Rush
22.0: 10077919 23.5: 10077922 24.5: 10077924 25.5: 10077926 26.5: 10077829 27.5: 10077831 28.5: 10077833 29.5: 10077836
30.5: 10077838 31.5: 10077841 85.00 $
1X2
My Custom Fit Sport: Performa(M&W):7.0•CustomFit6.5/6.0 • Performa 04 (M&W): 8.0/7.0NA•6.0GC• Performa & Irony 05 8.0 •CF7.0/6.0 • Performa & Irony 06 8 •CF7/6
22.0W: 78400019 23.5W: 78400022 24.5W: 78400024 25.5W: 78400026 86.00 $26.5: 78400129 27.5: 78400131 28.5: 78400133
29.5: 78400136 30.5: 78400138 88.00 $
31.5: 78583441 32.5: 78583443 33.5: 78583445 90.00 $
1X2
Thermic Fit: Performa (M&W): 770/660/5.0/4.0/4.0 Team/T Large/6.9/6.95/5.8/5.5/5.S/5.X/5.9/5.95/4.9/4.95/4.5/4.S/RS 5/RS 4/GT• Performa 04 (M&W) • 5.0/4.0/4.0GC/AF/TF/4TX/X5/X4• Performa & Irony 05 5.0/4.0/660/500 • Performa & Irony 06 5/4/660/500
22.0W: 78400219 23.5W: 78400222 24.5W: 78400224 25.5W: 78400226 72.00 $
26.5: 78399929 27.5: 78399931 28.5: 78399933 29.5: 78399936 30.5: 78399938 72.00 $
31.5: 78583741 32.5: 78583743 33.5: 78583745 78.00 $
1X2HP Thermic Sanitized Location/Rental: Symbio: 600/500/440 •OptimaUltraLight:500/520 (M&W)
22.0: 489681 23.5: 489683 24.5: 489685 25.5: 489687 26.5: 489689 27.5: 489691 28.5: 489693 29.5: 490429 30.5: 489695 68.00 $
1X2Thermic Fit:Performa T Small • Performa T4 Small • Course 60 •Falcon60
19.0: 88166312 20.0: 88166354 21.0: 88166355 54.00 $
22.0: 78584019 23.0: 78584022 24.0: 78584024 50.00 $
1X2 Thermic Fit: Performa T 3 •Kaïd•Keira
22.0: 88238319 23.5: 88238322 24.5: 88238324 25.5: 88238326 26.5: 88238329 90.00 $
1X2 Thermic Fit: Performa T 2 •Kaïd 18.0: 78141910 19.0: 78141912 20.0: 78141954 21.0: 78141955 45.00 $
1X2 Auto Fit: Course70/80/90/100
22.0: 78399719 23.5: 78399722 24.5: 78399724 25.5: 78399726 26.5: 78399729 27.5: 78399731 62.00 $
1X2 My Custom Fit Pro: Falcon100
22.0: 78862919 23.5: 78862922 24.5: 78862924 25.5: 78862926 26.5: 78862929 27.5: 78862931 86.00 $
1X2 My Custom Fit Performance: Impact Idol
22.0 W: 55472419 23.5 W: 55472422 24.5 W: 55472424 25.5 W: 55472426 90.00 $
26.5: 55472429 27.5: 55472431 28.5: 55472433 29.5: 55472436 30.5: 55472438 31.5: 55472441 90.00 $
1X2 Thermic Fit Sanitized: Impact Idol
22.0 W: 55472519 23.5 W: 55472522 24.5 W: 55472524 25.5 W: 55472526 70.00 $
26.5: 55472529 27.5: 55472531 28.5: 55472533 29.5: 55472536 30.5: 55472538 31.5: 55472541 70.00 $
1X2 My Custom Fit Sport: Mission Divine
22.0 W: 55472619 23.5 W: 55472622 24.5 W: 55472624 25.5 W: 55472626 88.00 $
26.5: 55472629 27.5: 55472631 28.5: 55472633 29.5: 55472636 30.5: 55472638 31.5: 55472641 88.00 $
1X2 Warm Liner: Elios Charm
22.0 W: 55472719 23.5 W: 55472722 24.5 W: 55472724 25.5 W: 55472726 80.00 $
26.5: 55472729 27.5: 55472731 28.5: 55472733 29.5: 55472736 30.5: 55472738 31.5: 55472741 80.00 $
1X2 Warmest Liner: Elios Charm
22.0 W: 100778019 23.5 W: 100778022 24.5 W: 100778024 25.5 W: 100778026 88.00 $
26.5: 100778029 27.5: 100778031 88.00 $
1X2 My Custom Fit Pro Biovent: Mission RS & Divine RS
22.0 W: 10078119 23.5 W: 10078122 24.5 W: 10078124 25.5 W: 10078126 105.00 $
26.5: 10078229 27.5: 10078231 28.5: 10078233 29.5: 1007823630.5: 10078238 31.5: 10078241 32.5: 10078243 33.5: 10078245 110.00 $
1X2 Rental Thermic Fit: Mission RS & Divine RS
22.0 W: 10078319 23.5 W: 10078322 24.5 W: 10078324 25.5 W: 10078326 80.00 $
26.5: 10078429 27.5: 10078431 28.5: 10078433 29.5: 1007843630.5: 10078438 31.5: 10078441 32.5: 10078443 33.5: 10078445 88.00 $
1X2 My Custom Fit Sport: SPK
25.5: 10078526 26.5: 10078529 27.5: 10078531 28.5: 10078533 29.5: 10078536 110.00 $
(All prices in U.S. dollars)
Spare partS alPIne boots > 75
Bootfitting
1X2 Rental Insoles
18.0: 10078610 19.0: 10078612 20.0: 10078654 21.0: 10078655 22.0: 10078619 23.0-23.5: 10078621
24.0-24.5: 10078623 25.0-25.5: 10078625 26.0-26.5: 10078628 27.0-27.5: 10078630 28.0-28.5: 10078632 29.0-29.5: 10078635 30.0-30.5: 10078637 31.0-31.5: 10078639 32.0-32.5: 10078642
33.0-33.5: 10078644
5.50 $
1X2 Therm-ic Insoles 22.0: 55473119 23.0-23.5: 55473121 24.0-24.5: 55473123 25.0-25.5: 55473125 26.0-26.5: 55473128 27.0-27.5: 55473130 15.00 $
1X2 Footbed: Standard (black) 24.0-24.5: 88164023 25.0-25.5: 88164025 26.0-26.5: 88164028 27.0-27.5: 88164030 28.0-28.5: 88164032 29.0-29.5: 88164035 12.00 $
1X2 Footbed: Performa Prolink+Sport • Evolution 2 •Verse• Ellipse • Performa
22.0-23.5: 489965 24.0-25.5: 489966 26.0-27.5: 489967 28.0-29.5: 489968 12.00 $
30.0-33.5: 78592037 6.00 $
1X2 Footbed: Falcon (black) 24.0-24.5: 19578423 25.0-25.5: 19578425 26.0-26.5: 19578428 27.0-27.5: 19578430 28.0-28.5: 19578432 29.0-29.5: 19578435 11.00 $
1X2 Heel height adjustment wedge (+4mm) 489970 6.00 $
1X2 Arch support Petit/Small: 10079201 Grand/Large: 10079301 4.00 $
1X4 JointsétanchéitéXwave,Rush 22.0-27.5: 55472201 28.0-31.5: 55472801 5.00 $
1X4 Joints étanchéité Impact Idol 22.0-25.5: 55472301 26.0-31.5: 55473001 8.00 $
1X2 Lower leg strap 35 mm (black/red) 22.0-25.5: 10078701 26.0-33.5: 10078801 12.00 $
1X8 Bouchon latéral Y/C (grey) 78591901 5.00 $
innerboot adaptation / Bootfitting1X4 Course Ellipse: canting rivet 78399001 8.00 $
1X4 CourseX2:canting screw 78399101 14.00 $
1X4 X-Wave • Impact • Mission RS • Divine RS •Falcon• Instinct: canting rivet 78399201 8.00 $
1X20 M4 T-Nut & screw 10078901 10.00 $
1X2 Pre-cut foam sheet (4mm) 10079101 35.00 $
1X2 Self-adhesivePUfilmroll(forinnerboot) 10079501 45.00 $
1X2 Plastic cant shim (for innerboot) 10079901 7.00 $
1X2 Adhesive arch support all models 10079401 16.00 $
1X2 SalomonFit+ 25.0-27.5: 10079601 28.0-31.0: 10079701 15.00 $
1X2 ProlinkForwardLeanAdjustmentWedge: (All products Course • Performa Prolink) (black)
Women + Japan 22.0-25.5: 882395 26.0-30.0: 882396
M 22.0-25.5: 882397 26.0-30.0: 8823987.00 $
1X2 Prolink innerboot adaptation plate 24.0-25.5: 882399 26.0-30.0: 882400 7.00 $
innerboot clip
1X10Evolution 98-99 8.5 (M&W) • 8.0 (M&W) •7.5(M&W)•7.0(M&W)• 6.0 (M&W) • 5.0 (M&W) •CF(M&W)• 600 •7.9• 4.9 • Evolution 97 9.0 (M&W) • 8.0 (M&W) + (Symbio+OptimaUltraLight)(black)
490197 5.00 $
Bootsole + Screws1X2 Back: Performa • Evolution • Performa T3 • Symbio 440 05 • Elios • Charm 8 mm / 22.0-33.5: 487450 8.00 $
1X2 Front: Performa • Evolution • Performa T3 • Symbio • Performa 04 • Verse04 • Ellipse 04
8 mm / 22.0-25.5: 489617 26.0-33.5: 489618 8.00 $
1X2 Walkadin Back: Verse• Ellipse & Siam • Performa & Irony • Course 60 (22-26.5) • Impact • Idol • Mission • Divine
12 mm / 22.0-33.5: 55473201 8.00 $1X20 12 mm / 22.0-33.5: 55473301 62.00 $
1X2 Walkadin Front: Ellipse & Siam • Performa & Irony • Symbio 440 05 • Course 60 (22-26.5) • Impact • Idol • Mission • Divine • Mission RS • Divine RS •SPK• Elios • Charm
12 mm / 22.0-25.5: 53527601 138.00 $12 mm / 26.0-33.5: 53527701 132.00 $
1X2012 mm / 22.0-25.5: 99492101 52.00 $12 mm / 26.0-33.5: 99492201 56.00 $
1X2 Walkadin Back: Verse• Ellipse & Siam • Performa & Irony • Course 60 (22-26.5) • Impact • Idol • Mission • Divine (grey/black)
12 mm / 22.0-33.5: 78589401 10.00 $
1X20 12 mm / 22.0-33.5: 99492301 62.00 $
1X2 Walkadin Front: Ellipse & Siam • Performa & Irony • Symbio 440 05 • Course 60 (22-26.5) • Impact • Idol • Mission • Divine • Mission RS • Divine RS • SPK (black/grey)
12 mm / 22.0-25.5: 78589801 26.0-33.5: 78589901 8.00 $
1X20 12 mm / 22.0-25.5: 99492401 50.00 $12 mm / 26.0-33.5: 99492501 54.00 $
1X2 Back: W-Wave (M&W) •CourseXRJapon•CourseGT• Course T • 1080 • 1080 Japon • Course 100 • 90 • 80 •70 881642 5.00 $
1X2 Evolution2 490353 6.00 $
1X2 Back: Team 3.0 • team 3.5 489763 5.00 $
(All prices in U.S. dollars)
Spare partS alPIne boots > 76
1X2 Back: 12 Mini • 15 Mini 16.0-17.0: 488030 4.00 $
1X2 Front:PerformaT2• Performa T4 Small • Course 60 (18-21) 882381 8.00 $
1X2 Back: Performa T2 • Performa T4 Small • Course 60 (18-21) 882382 8.00 $
1X2 Back: Mission RS • Divine RS (black/grey) 10079001 7.00 $
nordic laces
1X1 Quickfit95 cm: 78135401 6.00 $95 cm: 86065701 8.00 $
1X10 Quickfit Holder 10108001 4.00 $
1X2 Zip (black): 10108101 (grey): 10108201 10.00 $
1X2 Lace 10107201 7.00 $
1X2 VelcroStrap 25823701 6.00 $
rivet1X5 Carbon Pro • Racing Skate 9 • Active 9 Skate •Vitane9Skate 10106801 4.00 $
1X5 861 • Active 8 Skate CL •Vitane8SkateCL• Equipe Combi 10109201 4.00 $
insoles
1X2 Durafresh 5 mm
9K: 25823652 10K: 25823608 11K: 25823610 12K: 25823612 13K: 25823654 8.00 $
1: 25823616 2: 25823617 3: 25823656 4: 25823621 5: 25823623 6: 25823625 7: 25823627 8: 25823629 9: 25823631 10: 25823633
11: 25823635 12: 25823637 13: 25823639 14: 258236418.00 $
Screw chart1X100 Profil Equipe Junior Ø 6,3 / 14,5: 78859901 19.00 $
1X100 Profil Equipe Skate+Classic • Profil Active SC•BladesXAdventureRaid Ø 6,3 / 17,7: 890111 14.00 $
1X100 SNSXAdventureRaid(black) Ø 6,3 / 26: F872020 14.00 $
1X100 SNSXAdventureRaid Ø 6,3 / 19,5: 890109 13.00 $
1X100 Profil Equipe Skate+Classic • Profil Active SC Ø 6,3 / 19,5: 890109 13.00 $
1X100 Profil Auto Men • Auto Women •SNSXAdventureAccess Ø 6,3 / 19,5: 890109 13.00 $
1X100 Pilot Equipe Skate • Pilot Active Skate Ø 6,3 / 19,5: 890109 13.00 $
1X100 FixationBladesXAdventureRaid•Pilot Classic Ø 6,3 / 19,5: 890109 13.00 $
1X100 Profil Auto JR Ø 6,3 / 14,5: 890112 13.00 $
1X100 Profil Snow/Monster Ø 6,3 / 14,5: 890112 13.00 $
1X100 BladesXAdventureRaidAccess Ø 6,3 / 14,5: 890112 13.00 $
1X100 BladesXAdventureRaid•Pilot Classic•Profil Equipe JR Ø 6,3 / 14,5: 890112 13.00 $
1X50 Profil Auto Junior (Skis < 140) Ø 5,4 / 10: 000909 13.00 $
1X10 Adjustment screw • Equipe Classic Pilot 55454101 3.00 $
pull tab1X10 Pilot Equipe Skate - Pilot Active Skate (yellow): 10106201 12.00 $
plugs1X10 Pilot Equipe Skate • Profil Equipe Skate+Classic • Pilot Active Skate • Profil Auto (Men/
women/Junior) • Profil Active SC •SNSXadventureRaid+Access 890094 4.00 $
Capot•Cap1X10 Profil Equipe Classic • Profil Equipe skate • Profil Active SC 885608 6.00 $
1X1 Capot vis Pilot équipe Classic 55454201 3.00 $
1X1 Capot vis Pilot sport 55454301 3.00 $
flexor
1X2
Profil Equipe Skate 115: (red) 10104201 125: (red) 10104301 5.00 $
Profil Equipe Classic 85: (yellow) 10102201 5.00 $
Profil Active SC 105: (grey) 10105101 5.00 $
(All prices in U.S. dollars)
Need price 885608
Spare partS nordIc > 77
1X2
Profil Auto Men 105: (black) 10104801 5.00 $
Profil Auto Women 95: (grey) 10104901 5.00 $
Profil Auto Junior Junior: (yellow) 10105001 5.00 $
1X2 SNSXAdventureRaid 185: (grey) 10104401 5.00 $
1X2 FlexorSNSPwrofilSnowmonster Kid: (red) 78135701 5.00 $
ridge plate1X2 Ridge Plate Pilot Skate 78846901 10.00 $
1X2 Profil Equipe 78847201 10.00 $
1X2 ProfilAutoUniversalWomen•ProfilAutoUniversalJunior 10111001 10.00 $
1X2 ProfilUniversal 78847101 10.00 $
1X1 S/E Plate Pilot Equipe Classic 55454001 18.00 $
1X1 SPS Plate 25823501 5.00 $
Steel link1X2 Pilot steel link 78847301 8.00 $
Service products1X1 Jig • Pilot • Profil • BC •XAdventure 891000 80.00 $
1X4 Reversible jig pads • Pilot • Profil • BC •XAdventure 10106401 15.00 $
1X5 Drill bit - Profil Automatique Junior Ø 3,6 x L 8 mm: 000814 78.00 $
1X1 Drill bit Ø 3,6 x L 15 mm: 10105201 30.00 $
1X1 Special repair plug drill bit 10105301 32.00 $
1X100 Nordic repair plugs 000846 16.00 $
1X1 6 face posidrive bit 78504801 16.00 $
Sticker Pilot Equipe 55453901 5.00 $
SnowBoard BoardS Snowboard tip protector
1X1 Tip Protector - Rental boards (black) J90108 9.00 $
1X1 Tip Protector - Rental boards (black) 55473801 8.00 $
SnowBoard BindingS NB: No spare parts for S PRO TEAM bindings
transmission pads1X2 L+R Base Pad all SP models (khaki/black) S: 55473954 M/L: 55473955 8.00 $
1X2 L+R BasePadallSPXmodels(black) S: 78858454 M: 78858456 L: 78858458 30.00 $
1X2 L+R BasePadallForce&Gracemodels(black) S: 78836255 L: 78836258 —
1X2 L+R Base Pad all Relay models (black) S: 53527254 M: 53527256 L: 53527258 18.00 $
1X2 L+R Base Pad (white) S: 78837754 M: 78837756 L: 78837758 25.00 $
Plots•Supports•Clovers1X8 Clovers screws - 97 • Rental • Quick Angle J90511 4.00 $
1X1 Central Screw + Ring - 97 • S 2 Rental 01 • Quick Angle 78573301 4.00 $
4x4 disks1X8 Screw+washersfordisk-AllModels(except98 Rental) 88999301 5.00 $
1X2 6holesDiskIMS+Screws+Washers-AllModels(except98 Rental & Speedfit) 78855401 8.00 $
1X2 Quick Angle - All S Models 98-00exceptSPRO 889856 Aftermarket 28.00 $
(All prices in U.S. dollars)
Need price
S: 78836255 L: 78836258
Spare partS snowboard bIndIngs > 78
Straps
1X2 Toe Strap - All Models + M4 ToolfreeS: (black) 10099154 M: (black) 10099156 L: (black) 10099158 25.00 $S: (white) 10089154 M: (white) 10089156 L: (white) 10089158 25.00 $
1X2 Toe Adjuster - All S and SP Models (black) + M5 screw S: 53527454 M/L: 53527457 3.50 $
1X2 ToeAdjuster-AllSPX,Force,Grace&RelayModels(black) + M5 screwS: (black) 78563554 M/L: (black) 78563557 4.00 $S: (white) 10134057 M/L: (white) 10134057 4.00 $
1X2 Holding fast fit - All Relay models (black) 78839301 3.00 $
1X2 Holdingfastfit-AllForceandGracemodels(white) 53527501 5.00 $
1X2 Toe Sawblade - All SP Models 06- (black) S/M: 78374919 L: 78374921 5.00 $
1X2 Toe Sawblade - All SP Models 06+ (black) S/M: 78837054 L: 78837057 7.00 $
1X2 Toe Sawblade + Holding fast fit SPX AllSPX,Force,Grace&RelayModels.(black)S/M: (black) 78837155 L: (black) 78837158 12.00 $S/M: (white) 10134155 L: (white) 10134158 12.00 $
1X2 Alu TOE Buckle All Models 78560401 16.00 $78855301 25.00 $
1X2 Alu ANKLE Buckle All Models 78836901 28.00 $
1X2 L+R Ankle Strap All Relay Models (black)
145 mm / S/M: 99494055 25.00 $165 mm / L: 78560054 33.00 $
1X2 L+R Ankle Strap All Relay Models (white)
145 mm / S/M: 99494155 25.00 $165 mm / L: 78838755 40.00 $
1X2 L+R Ankle Strap Allmodels(SP,SPX,Grace).(black)
165 mm / S: 78560054 33.00 $185 mm / M/L: 78560057 33.00 $
1X2 L+R Ankle Strap Allmodels(SP,SPX,Grace).(white)
165 mm / S: 78838755 40.00 $185 mm / M/L: 78838758 40.00 $
1X2 Ankle Sawblade + Ring + Toothed Nut M5 All Models(black) 78839201 4.00 $(white) 10131401 4.00 $
1X2 Ankle Adjuster + Ring + Toofree Adjuster M4 AllSP,SPX,Force&Gracemodels(black) 88999601 5.00 $(white) 10131501 5.00 $
1X2 Ankle Adjuster + Toofree Adjuster M4 + Toothed nut M5 All Relay models(grey) 78836701 4.00 $
(white) 10133401 4.00 $
1X2 Aesthetic Strap Washer + Strap Screw M5 AllRelaymodelsexceptXLT07 and Pro 07 (white) 78839101 3.00 $
1X2 Aesthetic Strap Nut + Strap Screw M5 Only Relay 07XLTandPro 99493801 4.00 $
1X4Strap Kit (screw M5/nut M5/wascher M5) - (Toe/Ankle) All SP models 889905 5.00 $
Strap Kit (screw M5/nut M5/wascher M5) -(Ankle)AllSPXmodels 88999701 6.00 $
1X4 Strap Kit (Screw + Nut)-(Ankle)AllForce&Gracemodels. 78836801 6.00 $
Spoilers•Highback1X2 Highback Rotation Kit: AllSPXModelsexceptSPXCarbon 89380201 5.00 $
1X2 Highback Rotation Kit: AllForce&Gracemodels 78837301 7.00 $
1X2 Highback Rotation Rivet + Highback Ring Axis: All Relay models 19577201 4.00 $
1X2 Highback Rotation Screw: All Relay models 78839401 3.00 $
1X2 Toolfree FWL Adjuster: All models (grey) 78837501 7.00 $
1X1 Highback + FWL Adjuster + Screw: AllModelsSexceptSProandRelay.(SP,SPX,Grace).(black)
S: 88399619 M: 88399621 L: 88399623 9.00 $
1X1 Highback + FWL Adjuster + Screw: AllWmodelsexceptRelay(white) S/M: 78839755 16.50 $
1X1 Highback + FWL Adjuster + Screw: AllmodelsexceptRelay S/M: 78839855 L: 78839858 13.00 $
1X2 FWL Adjuster: AllmodelsexceptRelay(grey) 99493901 5.00 $
1X2 FWL Adjuster: All models 06+exceptForce&Relay(grey) 78857701 6.00 $
1X2 Length Base Adjustment Kit: AllForce&Gracemodels(grey) 78858001 6.00 $
Rental•Speedfit1X2 Speedfit Disc 78333801 Aftermarket 30.00 $
1X2 Ankle Strap 78697201 22.00 $
1X2 Buckle + M5 screw+SavenutM5x8 78619001 8.00 $
1X2 Quick cricket 78619101 8.00 $
1X2 TOE: Tooth Straps 180 mm/9,3 mm hole: 78619201 4.00 $
1X2 ANKLE:Toothstrapsforboltgard05+ 190 mm/6,5 mm hole: 78619301 4.00 $
1X2 Toestrap snap support easy base 78619401 4.00 $
(All prices in U.S. dollars)
Kike’sAug-11themail
100991 -> $25.00
*assumed also adjusted 100891
Kike’sAug-11themail
101340 -> $4.00
Kike’sAug-11themail
101341 -> $12.00
Kike’sAug-11themail
101314 -> $4.00
Kike’sAug-11themail
101315 -> $5.00
Kike’sAug-11themail
101334 -> $4.00
Spare partS1X2 Toestrap L/XL . (S/M couper 1 trou pour petite taille) 78619559 15.00 $
1X8 Screw4X4M6X20 78620501 4.00 $
1X2 Heelcup lever 78620601 4.00 $
1X4 Highback screw + bush + nut M6 . 78620701 4.00 $
1X2 Forwardleanscrew+washer+savenutM5X10 78620901 4.00 $
1X1 Highback S/M: 78621101 16.00 $
1X1 Highback L/XL: 78621201 16.00 $
1X2 ForwardleanadjusterHB S/M: 78621301 6.00 $
1X2 ForwardleanadjusterHB L/XL: 78621401 6.00 $
1X2 Scratchs + Springs + Covers + Levers + Screws 78840001 20.00 $
Service products1X1 Thandle6mmhexwrench 88999001 5.00 $
1X1 Tube of grease 000905 5.00 $
SnowBoard BootS liners
1X2 FULLCUSTOMFIT-AllModelsExceptTalapus&Fmodels
23.0-23.5: 78835921 24.0-24.5: 78835923 25.0-25.5: 78835925 26.0-26.5: 78835928 27.0-27.5: 78835930 28.0-28.5: 78835932
29.0-29.5: 78835935 30.0-30.5: 78835937122.00 $
1X2 AUTOFIT-AllModelsExceptTalapus&Fmodels
23.0-23.5: 78836021 24.0-24.5: 78836023 25.0-25.5: 78836025 26.0-26.5: 78836028 27.0-27.5: 78836030 28.0-28.5: 78836032
29.0-29.5: 78836035 30.0-30.5: 7883603774.00 $
inner Soles
1X2 AllmodelsexceptTalapus
23.0: 78611721 23.5: 78611722 24.0: 78611723 24.5: 78611724 25.0: 78611725 25.5: 78611726 26.0: 78611728 26.5: 78611729 27.0: 78611730 27.5: 78611731 28.0: 78611732 28.5: 78611733 29.0: 78611735 29.5: 78611736 30.0: 78611737 30.5: 78611738
11.00 $
laces1X2 (All models) Power Lace handle 78396101 8.00 $
1X2 (All models) Power Lace Locker 78396201 5.00 $
1X2 (Allmodels)LINERKevlarLaceLocker 78396301 5.00 $
1X2 Speed Lace Locker + Lace (Only Models with SPL system) 78836101 10.00 $
1X2 Speed Lace Locker + Lace 88935501 10.00 $
1X4 (All models) • Lace hook (grey) 78396501 5.00 $
1X4 (All models) Eyestay block (grey) 78396601 5.00 $
1X1 (All models) Liner kevlar lace (black) 25 m 78396401 17.00 $
1X2 (All models) Lace (black) 200 cm / 23.0-25.5: 78396026 210 cm / 26.0-28.5: 78396733 220 cm / 29.0-31.5: 78396841 7.00 $
1X2 Minicombo Main Part 99494501 7.00 $
1X2 New combo («tongue lace locker with springs») 99494701 4.00 $
1X2 (Fusionmodelsonly)OpenEyestayblock 19578501 4.00 $
1X2 (Fusionmodelsonly)ClosedEyestayblock 19578601 4.00 $
1X2 (BOA models only) BOA coiler reel • 05 (B521) 19578701 40.00 $
1X2 (BOA models only) BOA Lace cable 130 cm / 23.0-28.5: 19578801 140 cm / 29.0-31.5: 78911801 14.00 $
snowboard bIndIngs > 79
(All prices in U.S. dollars)
Kike’sAug-11themail
889335 -> $10.00
* please verify code, was previously 889355...
Spare partS footwear > 80
footwear laces
1X2 Mountain Lace (grey) 1,60 m: 86065401 1,80 m: 86065501 2,00 m: 86065601 6.00 $
1X2Lacet junior • Junior lace (black) 1,00 m: 86065101 6.00 $
LacetFootwear•Footwearlace (black) 1,30 m: 86065201 (grey) 1,30 m: 86065301 6.00 $
1X2 QuickLaceKit (black): 86065701 (grey): 86065801 8.00 $
poulies1X10 Plastic (black) 86067301 6.00 $
1X40 Rivets P90017 8.00 $
1X10 Lace Hook 86067401 8.00 $
insoles
1X2
Outsoles - Pro Thermic3,5/4: 86066423 4,5/5: 86066425 5,5/6: 86066427 6,5/7: 86066429 7,5/8: 86066431 8,5/9: 86066433
9,5/10: 86066435 10,5/11: 86066437 11,5/12: 86066439 20.00 $
Outsoles - Pro Ice •SuperMountainExpert3,5/4: 86066421 4,5/5: 86066423 5,5/6: 86066425 6,5/7: 86066427
7,5/8: 86066429 8,5/9: 86066431 9,5/10: 86066433 10,5/11: 86066435 11,5/12: 86066437 12,5/13: 86066439
20.00 $
Crampon Adapter (CHARLET MOSER) • PRO ICE •PROROCK 86066201 4.00 $
inner Soles
1X2 EVAinsolesdecut&perforated3,5/4: 86065921 4,5/5: 86065923 5,5/6: 86065925 6,5/7: 86065927
7,5/8: 86065929 8,5/9: 86065931 9,5/10: 86065933 10,5/11: 86065935 11,5/12: 86065937 12,5/13: 86065939
10.00 $
1X2 MoldedFeltSockliner
3,5: 86068220 4,0: 86068221 4,5: 86068222 5,0: 86068223 5,5: 86068224 6,0: 86068225 6,5: 86068226 7,0: 86068227 7,5: 86068228 8,0: 86068229
8,5: 86068230 9,0: 86068231 9,5: 86068232 10,0: 86068233 10,5: 86068234 11,0: 86068235 11,5: 86068236 12,0: 86068237 12,5: 86068238
13,0: 86068239
14.00 $
1X2 EVASocklinermolded3,5/4: 86068021 4,5/5: 86068023 5,5/6: 86068025 6,5/7: 86068027
7,5/8: 86068029 8,5/9: 86068031 9,5/10: 86068033 10,5/11: 86068035 11,5/12: 86068037 12,5/13: 86068039
8.00 $
liners
1X2 Inner boot PRO THERMIC (black/orange)
3,5: 86066520 4,0: 86066521 4,5: 86066522 5,0: 86066523 5,5: 86066524 6,0: 86066525 6,5: 86066526 7,0: 86066527 7,5: 86066528 8,0: 86066529
8,5: 86066530 9,0: 86066531 9,5: 86066532 10,0: 86066533 10,5: 86066534 11,0: 86066535 11,5: 86066536 12,0: 86066537
82.00 $
(All prices in U.S. dollars)
replacement proceduresStep one. Verifybycustomerreceiptorproductioncodethatthedefectivecomponent is under warranty. (Warranty claims should be handled through Authorized Dealers to ensure speed and accuracy of product replacement. Please do not refer a customer directly to Salomon.)Step two: Call customer service for return authorization number. (Thereisnolongeranexpresswarrantyform.)Step three: Return the defective set to Salomon with the return authorization number clearly printed on the outside of the package. Return the entire set, unless otherwise instructed by customer service.Ship the package freight pre-paid to:uSa canada Salomon Service Center Salomon Canada Sports Building5X,Bay6 DivisionofAmerSportsCanadaInc. 710WestAmidanDrive 3545ThimensBlvd. Ogden,UT84404 Saint-Laurent,QuebecH4R1V5Uponadealer’srequesttoCustomerService,awarrantyreplacementcompo-nent can be shipped in advance to the dealer before it is inspected at Salomon’s Service Center. Salomon will invoice the dealer for the replacement component and issue a credit when the defective component is received and verified. If the defectivecomponentexchangedfortheadvancereplacementisnotreceivedwithin 45 days from the issue of the Return Authorization Number, or proves not to be defective, no credit will be issued for the replacement product.Step four: Salomon will ship the replacement product to the dealer, surface freight pre-paid, after verification of the defect.
Salomon Service centerIn the event an unusual situation is encountered or a technical question arises please call the Salomon Service Center at:uSa 1-800-654-2668 can 1-800-361-3398ext.1142
warranty > 81
Salomon Retail Alpine Bindings are covered under warranty against defects in materials and manufacturing for a period of five years from their date of purchase to the original customer. In the absence of proof-of-purchase, this warranty period will be five years from date of manufacture of the product as indicated by production code. This warranty only covers the defective component, not the full pair or set, i.e., left toe piece, brake, right heel, etc. Abuse and normal wear are not covered by this warranty.
Mechanical inspection failuresNormalwearisexpectedwiththeuseofaproduct.Shouldacomponentfailamechanicalinspection(measuredreleasevaluesthatfalloutsidethe“In-UseRange”) within its warranty period, include the following information with the returned component.•Descriptionofinspectionthatthecomponentfailed.•Brandoftestdeviceanddateofmostrecentcalibration.•SkierCodeandvisualindicatorsetting.•Bootbrand,modelandsolelength.•Allmeasuredreleasevaluesandnameofthetechnician.
Every Salomon binding component is precision tested to assure its accuracy duringmanufacture.Itisextremelyrarethatacomponentwouldbeoutofcalibration unless there is visible damage. All bindings returned due to me-chanical testing failures are inspected. No replacement product will be issued unless all required information is included with the product.
product age VerificationVerification that the product is within the warranty period can be made in the following two ways: 1. Customer receipt indicating product was purchased within the last five years.2. Component production code* indicating manufacture of product within last five
years.
Salomon alpine skis, Snowblade and boots are warranted for a period of 2 years from date of original purchase. To determine the period covered by the warranty, the customer has to show the sales receipt.The Salomon Snowblade warranty can only function if the customer presents the Snowblade unit to the dealer as it was sold (ski and binding). If not, the warranty cannot be honored.Salomon pilot set warrantyThe skis are covered for 2 years from the date of original purchase. The bindings are covered by a 5 years warranty from the date of original purchase.
Ski: if there is a problem that is covered by the warranty (breakage, pullededge…)thatoccursduringthewarranty period (2 years), Salomon will replace either the Ski + Binding unit or the Ski only at our discretion.Binding: if there is a problem that is covered by the Salomon warranty (breakage,bindingpulled-out…)thatoccurs during the warranty period (5 years), Salomon will replace the Ski + Bindingunit,exceptifthedam-ageconcernsthebrakeortheAFDplate.In this case, Salomon will replace the defective part(s) with spare parts.Salomon’s only liability as regards this warranty will be to repair or replace the
defective product with a model or pair within the limits of available stock. These warranties cover skis, Snowblade, bindings against manufacturing defects.However, these warranties do not cover damage resulting from transport, handling, storage, failure by the cli-
ent to follow the instructions for use, modification of the product or normal wear and tear. In case of damage to a product caused by an accident or misuse, please consult Salomon Customer Service for advice on possible repair or replacement.
Ski problems not covered by the warrantyproblems SolutionsBent skis Contact subsidiary for more informationtop surface Can be repairedtip protector Can be repaired with spare partstail protector Cannot be repairedrunning surface Can be repairedBinding pull-out Can be repaired with insertspulled edge Can be repaired
Forallotherproblems,contactthesubsidiaryCustomerService.
Salomon helmets and poles are guar-anteed against defects in materials and manufacturing for a period of one year from their date of purchase*.This warranty only covers the defective compo nents. Claims arising from im-proper storage of product, modification, abuse and normal wear are not covered
by this warranty. This warranty applies only to products sold by an Authorized SalomonDealer.Forwarrantyservice,present the defective helmet with the original sales receipt to your nearest Authorized Salomon Dealer.* This warranty may vary in some countries.
Salomon’s only liability regarding this warranty will be to repair or replace the defective product with a model in an available version.warning:The Salomon helmets are designed only for the following activities: ski, snow-board and skiboard (Snowblade®).
They are not designed to be used on motorbikes or for other sports, me-chanical or not.The Alpine Salomon poles are designed for cross country or downhill skiing only, exceptfortheadjustablepolesthatcanbe used for downhill skiing and hiking.
note* All Salomon binding components are stamped with a two- or three-digit code upon their
final production to indicate month and year of production. Normally, codes are a letter followed by a number, with the letter indicating month of produc tion. Each number cor-responds to the actual year of production, i.e., 2 would indicate 2002, 3 would indicate 2003, etc. To simplify the warranty process, product age is determined by the year of production only. Retail bindings with a production code indicating that the bindings were manufac tured in 2004 (e.g., A4, M4) will be warranted until the end of the 2008/2009 ski season. Production codes are stamped in various places on all binding components.
Salomon retail Binding limited warranty
Salomon alpine Skis, Snowblade & Boot warranty
Salomon helmet & alpine pole warranty
ETM removes this paragraph
warranty