Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
SHOW US THE GOODS FOR YOUR CHANCE TO WIN A FITBITPost a picture of your CABAC Tax Tool Time purchases on Facebook or Instagram with the hashtag #CABACTAXTIME to go into the draw. Competition entry closes 30/06/2019. Winners announced on CABAC Facebook & Instagram pages.
Quality ISO 9001
Powering the Australian Electrical IndustrySince 1982
CRIMPING KITS DRILL BITS
CABLE TIES CABLE PREPARATION TOOLS - CRIMP
CABLE PREPARATION TOOLS - CUT CABLE PREPARATION TOOLS - STRIP TEST & MEASUREMENT ELECTRICAL SAFETY (PPE)
SPARKY TOOL KITS
HAND TOOLS & ACCESSORIES
SOLAR TOOLS
DATA
LIGHTING CONTROL & ENERGY EFFICIENCY
4 |
5 |
6 |
8 |
13 |
16 |
18 |
21 |
22 |
23 |
30 |
31 |
32 |
CONTENTS
4 | CRIMPING KITS
BOOT LACE PIN KIT AND HNKE5Part No. BLPKIT2
CU LUG KIT 2.5-16MM AND K26Part No. KPBK1
PRE-INSUL TERMINAL KIT AND KTC1Part No. KPBK6
TERMINAL CRIMPER KIT WITH 5 DIESPart No. K03C-5D
LUG KIT 2.5-16MM AND K26Part No. KPBK2
KTB BOX WITH KTC1Part No. KTB-T3
• Handy assortment of boot lace pin connectors in our most popular sizes for day to day use
• Easy to use and store in your tool box
• Kit contains a large quantities totalling 576 pieces of Uninsulated Copper lugs and links
• Copper lug hand crimper tool K26 included
• Professional kit supplied with a quality ratchet crimp tool (Part No. KTC1)
• Includes the following terminals in a sturdy plastic box
• Hand, ratchet crimp tool with five dies for bootlace ferrules, uninsulated, pre-insulated and roll crimp terminals
• Pre-insulated terminals: red, blue and yellow
• Kit contains handyman quantities totalling 211 pieces of uninsulated Copper lugs and links
• Copper lug hand crimper tool K26 included
• Basic terminal kit supplied with a budget ratchet crimp tool (Part No. KTC1)
• Contains a wide range of terminals
5 | DRILL BITS
AUGER BIT SET 16/20/25MMPart No. DRASET
HIGH SPEED STEEL JOBBER SET 1MM - 13MMPart No. DRHSSJSET1
SINGLE BRICK CONCRETE DRILL BIT SETPart No. DBCDSET
• High quality with a screw threaded centre point for all types of timber
• Bit set includes 3 pieces of various sizes
• Sizes: 16X200, 20X200 and 25X240mm
• High quality with a polished finish
• Suitable for drilling wood, metal and plastics
• Packed in a steel drill case
• 25-piece set
• High quality concrete drill bit set
• Packed in a steel drill case
• 6-piece set - 4, 5, 5.5, 6.5 ,8 ,10
• Suitable for drilling brick, mortar and concrete
6 | CABLE TIES
STAINLESS STEEL CABLE TIE TENSIONERPart No. SSTTT2
S/S 316 STANDARD TIE 200 X 4.6MM 100 PCSPart No. SST200-316S
PRO CABLE TIE 12MM 2 X 25M ROLL BLACKPart No. VT12BK/50M
S/S 316 STANDARD TIE 360 X 4.6MM 100 PCSPart No. SST360-316S
PRO CABLE TIE 19MM X 25M ROLL BLACKPart No. VT19BK/25M
• An affordable and robust tool developed by CABAC
• Tensions and cuts cable ties in one operation
• Adjustable tension for standard and heavy-duty ties
• Low friction to ensure reduced effort
• Supplied with 2x spare grip pads and 1x grip spring
• Weight: 660g
• Self-locking head design speeds installation and locks into place at any length along the body
• No water absorption
• Hook and loop tape to bundle UTP cable or bind to cable support
• Supplied in reels - cut to length onsite
• Reusable - as many times as you like
• Self-locking head design speeds installation and locks into place at any length along the body
• No water absorption
• Hook and loop tape to bundle UTP cable or bind to cable support
• Supplied in reels - cut to length onsite
• Reusable - as many times as you like
7 | CABLE TIES
200MM BLUE CABLE TIES 100 PACKPart No. CT200BL/100
200MM GREEN CABLE TIES 100 PACKPart No. CT200GR/100
200MM RED CABLE TIES 100 PACKPart No. CT200RD/100
200MM ORANGE CABLE TIES 100 PACKPart No. CT200OR/100
200MM YELLOW CABLE TIES 100 PACKPart No. CT200YL/100
• Head and pawl are integrally moulded for added strength and durability
• Tip designed for easier pick up, insertion and pull through
• Smooth round edges do not cut insulation
• Self-locking low profile head conserves space
• Not suitable for outdoor use
• Smooth round edges do not cut insulation
• Self-locking low profile head conserves space
• Not suitable for outdoor use
• Smooth round edges do not cut insulation
• Self-locking low profile head conserves space
• Not suitable for outdoor use
• Smooth round edges do not cut insulation
• Self-locking low profile head conserves space
• Not suitable for outdoor use
• Smooth round edges do not cut insulation
• Self-locking low profile head conserves space
• Not suitable for outdoor use
8 | CABLE PREPARATION - CRIMP
BOOTLACE CRIMPER 10 TO 50 SQ.MMPart No. HNKE14
BOOTLACE CRIMPER 50 - 95 SQ MMPart No. HNKE15
BOOTLACE CRIMPER 120 & 150 SQ.MMPart No. HNKE16
• Crimping bootlace ferrules is essential for good electrical connections in termination clamps or tunnels
• HNKE14 ratchet crimper for bootlace ferrules sizes 10 to 50 mm with ratchet release lever.
• Oval shaped crimp die with indents for conductor grip
• Crimping bootlace ferrules is essential for good electrical connections in termination clamps or tunnels
• HNKE15 ratchet crimper for bootlace ferrules sizes 50 to 95 mm with ratchet release lever.
• Oval shaped crimp die with indents for conductor grip
• Crimping bootlace ferrules is essential for good electrical connections in termination clamps or tunnels
• HNKE16 ratchet crimper for bootlace ferrules sizes 120 & 150sq. mm with ratchet release lever
• Oval shaped crimp die with indents for conductor grip
9 | CABLE PREPARATION - CRIMP
BOOTLACE CRIMPER 0.5-16.0MM2 LOW COSTPart No. HNKE5
DIE-LESS BOOTLACE CRIMPER 0.75-10MM2
Part No. HNKE10
HEXAGONAL CRIMPER 6-120MM2
Part No. K06
• A low cost tool with a huge crimp range for bootlace ferrules
• Serrated crimp surface creating an enhanced grip
• Ratchet is adjustable to compensate for tool wear
• Suitable for bootlace ferrules and un-insulated end sleeves
• A ferrule crimper with a unique crimp action
• Serrated crimp surface creating an enhanced grip
• Ensure that tool is well oiled for correct operation
• Self-adjusts with 9 pressure adjustments
• Hexagonal copper lug crimper with range from 6-120mm2
• Dies are self-contained and rotating
• Over centre action ensures a complete crimp
• Spare die set also available Y-K06H/3
• Also available with removable handles and a case K06C
10 | CABLE PREPARATION - CRIMP
COMBINATION HAND CRIMPERS 1.5-16MM2Part No. K26
COPPER LUG CRIMPER 6-25MM2Part No. K28
PRE-INSULATED TERMINAL CRIMPER RD/BL/YLPart No. KTC1
PRE-INS. TERMINAL CRIMPER RD/BL/YL PRECISIONPart No. HP3
• Low cost ratchet crimper
• High leverage to create a ‘W’ crimp for a larger crimp range
• Ratchet operation ensures correct crimp
• Suitable for copper lugs and un-insulated terminals ranging from 1.5-16mm2
• Robust ratchet crimper for a large range of copper lugs 6-25mm2
• High leverage to create a ‘W’ crimp for a larger crimp range
• Low effort required due to high leverage handles
• Ratchet operation ensures correct crimp
• Low cost ratchet terminal crimper for red, blue and yellow pre-insulated terminals
• Ratchet operation ensures correct crimp and reduced hand effort
• Max capacity is 6mm2 when crimping flexible yellow conductors
• A high precision ratchet terminal crimper for red, blue and yellow pre-insulated terminals
• Jaws are hardened and polished for optimum crimp
• Ratchet operation ensures correct crimp and reduced hand effort
• Guaranteed for a million crimps
11 | CABLE PREPARATION - CRIMP
13T BATTERY CRIMPER LI-ION DESKTOPPart No. B1300-CT
• 18V battery powered hydraulic 13 tonne crimping tool, allows for more crimps per charge at a quicker pace
• Balanced, low noise and vibration for better operator comfort
• LCD condition display monitors the crimp pressure
13T BATTERY CRIMPER LI-ION LONG HEADPart No. B1350L-CT
13T BATTERY CRIMPER LI-ION U HEADPart No. B1350-UCT
• 18V battery powered hydraulic 13 tonne crimping tool, allows for more crimps per charge at a quicker pace
• LCD condition display monitors the crimp pressure
• Simple and basic operation with low vibration, noise and comfortable handling
• Improved cycle time
• Increased cycles per battery charge
• OLED display provides real time operating information
13T BATTERY CRIMPER LI-IONPart No. B1350-CT
• Self-contained battery crimper capable of crimping electrical connectors up to and including 500mm² Aluminium and 630mm² Copper conductors
• Sturdy steel trigger guard helps to protect the trigger from unintentional operation and field knocks.
12 | CABLE PREPARATION - CRIMP
HT131-C WITH FULL SET OF DIES 16-300MM2
Part No. HT131-C-WHO
• Quality manufacture and robust design will give years of trouble free service
• Nominal force of 13.3 tonnes at the die faces
• Head rotates 180° for work in tight spaces
12 TON DIE SET OF 16 - 300MM2
Part No. DIESET
• 12/13 tonne dies for Australian and New Zealand dimensioned lugs and links
• Hexagonal crimp die kit for Cu
• Made from heat-treated carbon steel
• Copper dies 16sq.mm to 300 sq.mm
ALUMINIUM DIE SETPart No. DIESET3
• 12/13 tonne dies for Australian and New Zealand dimensioned lugs and links
• Hexagonal crimp die kit for Al
• Made from heat-treated carbon steel
• Aluminium dies for 6 sq.mm to 300 sq.mm
PLATINUM SERIES BATTERY CRIMPER 23TPart No. MSS-U230-18V
• 60+ Crimps per battery charge
• Visual crimp indicator - ensures correct crimp every time
• 355 degree head rotation
• Industry exclusive mechanical ‘Visual Pop-Up Indicator’
13 | CABLE PREPARATION - CUT
CONDUIT CUTTER - UP TO 38MM ODPart No. KCC32
CONDUIT CUTTER - 42MM ODPart No. KCC42
CONDUIT CUTTER - 46MM ODPart No. KCC48
• Designed for quick, neat and square cutting of PVC conduit and duct
• Cuts up to 38mm outside diameter
• Supplied with a flat bed attachment for cutting duct
• Replacement blade available KCC32 BLADE
• High quality tool for cutting PVC conduit
• Features a stainless steel cutting blade
• Replacement blade available KCC42 BLADE
• Suitable for 42mm OD conduit
• Features a stainless steel cutting blade
• Very large conduit cutter for cutting PVC conduit up to 46mm diameter
• Unique clutch action opens blades once cut is complete
• Excellent for precise cutting without distortion
• Heavy-duty ultra hard HRC57 stainless steel blade
14 | CABLE PREPARATION - CUT
CABLE CUTTER GENERAL PURPOSE UP T0 70MM2
Part No. K40
RATCHET CABLE CUTTER UP TO 300MM2
Part No. K683/T
CABLE CUTTER - UP T0 500MM2
Part No. KME3
• Low cost general purpose cable cutter
• Designed to cut copper and aluminium conductors
• Conductor range up to 70mm2
• Parrot beak style blades do not distort cable
• A compact cutter designed for annealed copper and aluminium conductors up to 300mm2
• Maximum 32mm outside diameter
• Small size enables cutting in tight spots
• Ratchet reduces hand effort
• Large cable cutter for annealed copper and aluminium conductors
• Parrot beak style blades do not distort cable
• Replacement blade available KME3 BLADE
• Maximum: 500mm2
15 | CABLE PREPARATION - CUT
18V BATTERY CUTTER 55MMPart No. BTC550T
18V BATTERY CUTTER 95MMPart No. BTC950T
The unique 18V 4 Ah lithium-ion battery offers a higher capacity than its 14V 3 Ah predecessor. Greater operating speed and cutting force is a result of a revitalised hydraulic system with double speed action giving a more rapid approach of the cutting blades to the connector.
Product Features
• 18V battery powered for faster cutting operations
• Lightweight and balanced for single handed operation
• Cutting blades: High strength, heat treated special steel
• Head pivots up to 320 degrees - ease of use in confined spaces
• Low noise and minimal vibration aid operator comfort
• Cutter suitable for armoured cable, steel rope and rods
• Increased cycles per battery charge
• Built in LED working light for dark areas
The unique 18V 4 Ah lithium-ion battery offers a higher capacity than its 14V 3 Ah predecessor. Greater operating speed and cutting force is a result of a revitalised hydraulic system with double speed action giving a more rapid approach of the cutting blades to the connector.
Product Features
• 18V battery powered for faster cutting operations for Aluminium, Copper and telecom cables
• Cutting blades: High strength, heat treated special steel
• Head pivots up to 335 degrees - ease of use in confined spaces
• Low noise and minimal vibration aid operator comfort
• Lightweight and balanced for single handed operation
• Increased cycles per battery charge
• Built in LED working light for dark areas
16 | CABLE PREPARATION - STRIP
STRIPPER SWIVEL BLADE 4.5-25MM ODPart No. AM1
SWIVEL BLADE STRIPPER 8 - 28MMPart No. KAM1
SWIVEL BLADE STRIPPER 28 - 35MMPart No. KAM2
SWIVEL BLADE STRIPPER 35-50MMPart No. KAM3
• Manual swivel blade stripper for stripping insulation from conductors 4.5mm to 25mm outside diameter
• Tool holds three spare blades in the handle
• Good for orange circular and larger building wire
• Spare blades are also available separately
• Designed to strip circular cables sheaths
• Blade adjustable for cutting depth
• Unique cranked swivel blade & adjustable spring loaded clamp
• Length 140 mm. Weight: 92g
• Cable diameter range: 8 to 28 mm
• Designed to strip circular cables sheaths
• Blade adjustable for cutting depth
• Unique cranked swivel blade & adjustable spring loaded clamp
• Length 180 mm. Weight: 90g
• Cable diameter range: 35 to 50 mm
• Designed to strip circular cables sheaths - blade adjustable for cutting depth
• Unique cranked swivel blade & adjustable spring loaded clamp
• Length 170 mm. Weight: 87g
• Cable diameter range: 28 to 35 mm
17 | CABLE PREPARATION - STRIP
DATA WIRE STRIPPER 3.2-9.5MM O.D.Part No. KDAT
• Strips the outer jacket of UTP and STP cables
• Strips multi strand phone/data cables from 3.2 to 9.5mm OD
• Strips flat cables from 2 to 10 pair
• Strips building wire up to 6mm2
CABLE END STRIPPER 0.5-6MMPart No. KUS2
CABLE END STRIPPER 1-3.2MM2
Part No. KUS4
GENERAL WIRE STRIPPER - DOUBLE VPart No. HVKUS
• Flat cable 2, 3 and 4 core up to 10mm2, round flex 0.5 to 16mm2
• Built in depth gauge and adjustment for soft or hard insulation
• Strip length 8 to 24mm
• Easy access built-in cutter
• Strip pressure adjustment
• Low cost cable stripper
• Spring loaded with graduated slots
• Suitable for conductor of 1.0 to 3.2mm2
• Built-in depth gauge
• Designed to strip circular cables sheaths
• Blade adjustable for cutting depth
• Unique cranked swivel blade & adjustable spring loaded clamp
• Length 170 mm. Weight: 87g
• Cable diameter range: 28 to 35 mm
18 | TEST & MEASUREMENT
GENERAL PURPOSE DIGITAL MULTI METERPart No. BM251
5 IN 1 AUTO RANGE DIGITAL MULTIMETERPart No. T8229
• Economical, compact multimeter for contractor’s daily use
• Functions: data hold, relative measurement and electric field testing
• IEC61010 CATIII 600V & Beep-Jack lead input warning
• 3 5/6, 6000 count LCD
• Autoranging DMM, 5 in 1 feature packed with lux, humidity and sound measurement
• CAT III 600V, 3999 count LCD
• Audible & visual socket correct lead input indication
• Data hold and relative measurement
• Temperature measurement with type-k thermocouple
ALL IN ONE INSULATION TESTER & DIGITAL MULTI METER Part No. BM877
• DMM, true RMS for Installation testing with 50V to 1kV Insulation test and continuity test
• EN61010 CATIII 1000V, CAT IV 600V AC and DC
• 3 5/6 digit, 6000 count dual display LCD, bargraph, backlight
• VFD AC Voltage and BeepJack input warning
19 | TEST & MEASUREMENT
600A AC/DC TRMS COMPACT CLAMP METERPart No. BM079
BATTERY POWERED APPLIANCE TESTERPart No. CABPAT
ANALOGUE INSULATION TESTER 250V, 500V, 1000VPart No. T1800
• 3 5/6 digit, 6000
• CATIII 600V
• True-RMS measurement
• Backlight LCD
• Jaws 35mm cable with AmpTip facility
• Data hold and relative zero
• Backlight LCD
• Battery powered portable appliance tester with single push button earth, insulation and polarity tests
• Test Class I and Class II power boards and leads
• 250V or 500V insulation Test
• Clear and easy to read LCD screen
• Featuring low resistance and voltage measurement and supplied with straps to assist access when testing
• Voltage detection live line visual warning light
• Handy plastic case with leads compartment
• Removable lid
20 | TEST AND MEASUREMENT
LAN TESTER 10BASET 10BASE2 BNC/RJPart No. 35RJTST8
• Primary use is for testing continuity, shorts and open circuits, individual cables and pairs of UTP or STP
• Remote display unit allows for viewing at either end
• Displays pairs and crossed pairs
• Includes LEDs for each wire ensuring easy pin configuration
AC VOLTAGE (NCV) DETECTOR ADJ CATIII 600Part No. C8902A
PHASE ROTATION TESTER - FUSEDPart No. T855
POWER POINT TESTER V2Part No. TEL1TLV2
• CATIII 600V voltage proximity sensor with adjustable sensitivity for polarity testing
• Visual and audible indication
• On/Off button
• Double moulded
• CATIV 600V with 10A fuse in each lead
• Line live indication lights
• Push button control
• Heavy duty crocodile clips
• Long leads for overhead lines
• Socket polarity visual tester indication
• Suitable for 230V 10A Australian socket outlets
• RCD trip tester with push button
• Live indication of socket outlet
• Indicates Active polarity compared to neutral/earth
21 | ELECTRICAL SAFETY (PPE)
SAFETY GLASSES COBRA CLEARPart No. 93-12SCC
BASIC LOCKOUT KITPart No. ULO-01000
POLYESTER GLOVES COATED PALM BLACK S10Part No. GLV77400-10
SAFETY GLASSES COBRA SMOKEPart No. 93-12SGSD
LOCKOUT KIT PREMIERPart No. ULO-ES-EP01
POLYESTER GLOVES COATED PALM FLURO LIME S10Part No. GLV77500-10
• Basic style of lightweight safety glasses
• Rated for medium impact
• Clear lenses and frame
• AS/NZS 1337.1 Approved
• Basic lockout kit perfect for electrical contractors
• A selection of products necessary for electrical lockout
• Black nitrile coated rough sandy palm & finger tips reduce hand fatigue while providing maximum comfort and dexterity
• Seamless machine knit black polyester shell
• Wrap around style safety glasses
• Rated for medium impact
• Smoke lenses and frame
• AS/NZS 1337.1 Approved
• Contains a wide range of lockout devices and products to suit almost any application
• Includes circuit breaker lockouts, hasps, locks, tags and more
• Black nitrile coated palm and finger tips helps reduce hand fatigue & provides maximum comfort and dexterity
• Seamless machine knit fluorescent lime 100% polyester shell
22 | SPARKY TOOL KITS
STARTER TOOL KITPart No. APKIT1
PROFESSIONAL TOOL KITPart No. APKIT3
DELUXE PROFESSIONAL TOOL KITPart No. APKIT7
• A kit for the apprentice including a voltfinger CATIV 1000V and 1000V electrical pliers
• Supplied with a tradesman’s multi compartment tool box
• Kit components can be ordered as individual items
• Kit contains: TB18, KHAM1, KT10M, WBS2, HVSDK5, HVEP230HP, T7107A and KUK4
• A kit for the professional including a powerpoint RCD tester and 1000V pliers and screwdriver set
• Supplied in a strong tradesman’s tool carry bag
• Kit contains: CP6, KCC32, HVSDK6, CPB2, KSC125B, HVLNP205B, HVSC2, HVEP230HL, KUS4, K40, K26, KTC1, PSDK1, KAW250, WBS2, KHAM1, KLP250, HSKIT2, T7114, KUK4, TEL1TLV2 and CABACCAP
• A deluxe kit for the professional including a CATIV 1000V voltfinger and a 3 3/4 auto-range digital multimeter
• Supplied with a tradesman’s tool carry multi-pouch
• Kit contains: CP8, EVP220, HVSC200B, HVSDK5, K40, KCC42, KT10M, T7107A, KUS4, KAM1, KAKTM, T8268, KTC1 and K26
23 | HAND TOOLS & ACCESSORIES
SIDE CUTTER 125MMPart No. KSC125B
SIDE CUTTER 1000V RATED 150MMPart No. HVSC150B
SIDE CUTTER 1000V RATED 200MMPart No. HVSC200B
• For use in fine electrical data and electronic work
• Spring action for ease of use, and small size
• Two colour cushioned handle, with finger protection
• For use on copper cables only
• Flush cutting, bevelled blades
• Drop forged vanadium steel
• 1000V insulated handles
• Suitable for cutting soft wire
• Flush cutting, bevelled blades
• Drop forged vanadium steel
• 1000V insulated handles
• Suitable for cutting soft wire
24 | HAND TOOLS & ACCESSORIES
LONG NOSE PLIER 125MMPart No. KLNP125B
LONG NOSE PLIERS 1000V RATED 150MMPart No. HVLNP150B
LONG NOSE PLIERS 1000V RATED 205MMPart No. HVLNP205B
PROFESSIONAL ELECTRICAL PLIERSPart No. EP220
• For use in fine electrical data and electronic work
• Spring action for ease of work
• Dual coloured cushioned handle with finger protection
• Long, serrated inside jaws and bevelled side-cutting blades
• Drop forged vanadium steel
• 1000V insulated handles
• Long, serrated inside jaws and bevelled side-cutting blades
• Drop forged vanadium steel
• 1000V insulated handles
• Suitable for use in panel, installation wiring and line work
• Precise and patterned flat gripping tip
• Serrated, round-bar gripper
25 | HAND TOOLS & ACCESSORIES
160IS VDE SLIM 5 PCE BOX SET & BOPENPart No. WERA321000
3160 I/7 PCE VDE SCREWDRIVER 7 PC SET SSPart No. WERA022728
160IS VDE SLIM 7 PCE BOX SETPart No. WERA135961
• Extra slim reduced blade diameter
• Ergonomic Kraftform handle
• The set contains the following: Slotted Screwdrivers : 1x 0.6x3.5x100, 1x0.8x4.0x100, 1.0x5.5x125 Phillips Screwdrivers - No 1 x 80, No 2 x 100
• Safety screwdriver for stainless steel screws
• Supplied with a voltage tester and rack
• For slotted and phillips screws
• Stainless steel 7-Piece set
• Suitable for use in panel, installation wiring and line work
• Precise and patterned flat gripping tip
• Serrated, round-bar gripper
26 | HAND TOOLS & ACCESSORIES
CAULKING GUNPart No. KCG1
PRECISION WALL BOARD SAWPart No. WBS2
LOCKING PLIER 250MM10 INCHPart No. KLP250
TRADESMAN’S HAMMER PROFESSIONAL 20OZPart No. KHAM1
HACKSAW - PROFESSIONAL TRADESMAN’S TOOLPart No. HS1HD2
ADJUSTABLE PLIER 250MM10 INCHPart No. KAP250
• Quick release to remove spent cartridges
• Accepts any standard cartridge
• Excellent cutting performance with a narrow blade and fully ground teeth
• Knife tip impulse hardened for increased blade life
• Non-slip rubber grip
• Professional quality
• Welded top jaw, drop forged jaw and curved jaw
• Includes wire cutter
• Hardened and tempered for longevity
• A professional and unbreakable hammer
• Hand finished and balanced with a sturdy rubber grip
• Fibreglass handle and a carbon steel head
• A professional tool for a longlife in continuous use
• Quick blade change with ergonomic handle
• Spare blades can be stored inside handle
• Professional quality adjustable pliers
• Fully polished and heat treated
• Comfortable, anti-slip grip
• Curved jaws for maximum grip
27 | HAND TOOLS & ACCESSORIES
ADJUSTABLE WRENCH 200MM 8 INCHPart No. KAW200
TAPE MEASURE 5MPart No. KT5M
ADJUSTABLE WRENCH 250MM 10 INCHPart No. KAW250
TAPE MEASURE 10MPart No. KT10M
• Professional quality adjustable wrench
• Available in 8, 10 and 12 inch lengths
• Chrome-plated, drop forged vanadium steel
• Auto-lock with two release buttons
• Magnetic tip on tape end
• Belt clip
• Metric and imperial measurements
• Professional quality adjustable wrench
• Available in 8, 10 and 12 inch lengths
• Chrome-plated, drop forged vanadium steel
• Push button retrieval
• Featuring a magnetic grip, hook & tape lock
• Metric measuring tape contained in a rugged rubber case
AUTO RETRACTABLE SAFETY KNIFEPart No. KUK5
• Zinc alloy safety knife
• Retractable blade holder
• Ergonomic handle and lightweight
• Comes with 4 spare blades
NEW
28 | HAND TOOLS & ACCESSORIES
TRADESMANS TOOL CARRY LONG WITH HANDLEPart No. CP9
AUTO IGNITION BUTANE POWERED PRO TORCHPart No. GT1400
TRADESMANS TOOL CARRY MULTIPOUCHPart No. CP8
• Provides maximum versatility when it comes to tool carrying and capacity
• Aluminium bar handle with cushion grip
• Ideal for industrial applications
• Torch runs on normal cigarette lighter fuel
• Use for brazing, soldering, plumbing, industrial maintenance
• A compact nylon bag for those smaller technical jobs
• Linked handle for extra flexibility
• Internal side pockets contain dividers
BATTERY CLAMP 250APart No. BC250A
• Designed with a high standard of plating
• Rated for 250A applications
• Hardened jaws and a copper shunt between the handles to prevent overheating of spring
LED INDICATED HEAT GUNPart No. HG2232
• Continuous adjustable temperature
• 3 fan settings
• Constant heat control with continuous working with no overheating
MULTI COMPARTMENT TOOL BOX 520MMPart No. TB21
• Designed for the tradesman’s daily use
• Conventional sturdy box and latches
• Lift out top tool tray
29 | HAND TOOLS & ACCESSORIES
CABLEMASTER - FIBREGLASS FISH TAPE 30MPart No. FTCM30
GLASSJACK - FIBREGLASS FISH TAPE 20MPart No. FTGJ20
4.5MM X 80MTR TRACE ROD AND FRAMEPart No. MSS-4.5-80
6MM X 120MTR TRACER ROD AND FRAMEPart No. MSS-6TR-120
• Top end professional fish tape made from pultruded glass with special polypropylene outer coating - low friction and high abrasion resistance
• Non-conductive glass increases safety
• Resilient to bending and shear stresses
• Top end professional fish tape made from pultruded glass with special polypropylene outer coating - low friction and high abrasion resistance
• Non-conductive glass increases safety
• Highly resilient to bending and shear stresses
• Suitable for underground cables and conduit locating with the use of a suitable locator
• Supplied complete with brass ends and hauling eye
• Copper trace wire running through the core
• Fitted to a sturdy zinc plated steel frame with brake
• Suitable for underground cables and conduit locating with the use of a suitable locator
• Supplied complete with brass ends and hauling eye
• Copper trace wire running through the core
• Fitted to a sturdy zinc plated steel frame with brake
30 | SOLAR TOOLS
SOLAR CABLE STRIPPER 1.5-6 MM2
Part No. KUSOLAR
SOLAR CONNECTOR CRIMPER 2.5/4/6 MM2
Part No. HFSOLAR2
The CABAC Wire Stripper KUSOLAR has a precise adjustment (5-fold) and an optical length scale of 8 - 24mm (5/16 - 1”). This allows all round cables of 1.5 - 6.0 mm2 (16 - 8 AWG) used in solar engineering to be stripped.
The blades of the Wire Stripper KUSOLAR have been additionally hardened so that multi-level rubberised insulations can be removed easily.
An easy-to-access side cutter is integrated into the tool and can be used up to a cable diameter of 3mm (1/8”). It also has exchangeable blades.
Product Features
• KUSOLAR wire stripper and cutter for solar cable 1.5, 2.5, 4 or 6 mm2 & adjustable to 26 mm strip length
• Cable cutter up to 3 mm diameter copper wire
• Bright yellow high strength reinforced glass fibre body
• Blades for high quality Soligen steel
The HFSOLAR2 is a ratchet crimping tool for roll-over crimp contacts for solar cable connectors.
Product Features
• Die suitable for solar connector pins 2.5, 4 & 6mm2
• Ratchet ensures correct tension and completion of crimp cycle
• Includes ratchet release lever
• Has an adjustment dial for setting correct tension and force
• Ergonomic long handles with gripping covers for increased leverage
NEW
NEW
31 | DATA
JACK CAT5E K/110 - 10PKPart No. J5E/10
JACK SHUTTERED CAT5E K/100 WHITEPart No. J5E/10-SH
JACK CAT6 K/110 - 10PKPart No. J6/10
PATCH PANEL CAT5E REMOVABLE ID 24 PORTPart No. PP24C5E
JACK CAT5E K/110 - 50PKPart No. J5E/50
JACK SHUTTERED CAT6 K/100 WHITEPart No. J6/10-SH
JACK CAT6 K/110 - 50PKPart No. J6/50
PATCH PANEL CAT6 REMOVABLE ID 24 PORTPart No. PP24C6
• Cat6 RJ45 white jack fits directly into Clipsal wall plate
• KATT style termination
• Wiring label for both 568A and 568B
• Handy replaceable label strips
• Sturdy metal construction
• Conforms with EIA/TIA568A/B C5 Standards
• Enhanced Category 5 performance RJ45 8P8C
• Fits directly into Clipsal wall plates
• Wiring label for both 568A & 568B wiring formats
• Shuttered jack with Category 6 performance RJ45 8P8C - keystone footprint
• Includes bezel for mounting into Clipsal style wall plates
• Enhanced Category 5 performance RJ45 8P8C
• Fits directly into Clipsal wall plates
• Wiring label for both 568A & 568B wiring formats
• Shuttered jack with Enhanced Category 5 performance RJ45 8P8C keystone footprint
• Includes bezel for mounting into Clipsal style wall plates
• Cat6 RJ45 white jack fits directly into Clipsal wall plate
• KATT style termination
• Wiring label for both 568A and 568B wiring
• Sturdy metal construction
• Handy replaceable label strips
• Rear cable management bar and cable ties included
32 | LIGHTING CONTROL & ENERGY EFFICIENCY
PRODUCT FEATURES
The S-Click HNS810TM switchboard schedule timer is a Bluetooth programmable, single module, DIN mount, 7 day digital schedule timer used for HVAC and lighting applications as well as for the control of electrical pumps and motors. This product has been designed to offer superior power reserve, pulse function, service counter as well as daylight saving capabilities.
UNIQUE DEVICE SERIAL NUMBERSEnables centralised schedule management at remote sites
MOUNTING MADE EASYStandard 17.5mm DIN rail mounting
LARGE SCREW TERMINALSSuitable for stranded cable
MADE IN AUSTRALIAProudly manufactured in Adelaide, South Australia
AUTOMATIC DAYLIGHT SAVINGSDefault on
16X 7 DAY / 24 HOUR PROGRAMSProviding maximum flexibility
BLUETOOTH® CONNECTIVITYProgram and control from your smartphone or tablet
NEWBLUETOOTH SCHEDULE TIME SWITCH - SINGLE MODULEPart No. HNS810TM
33 | LIGHTING CONTROL & ENERGY EFFICIENCY
SMART SWITCH DIGITAL 1 CHANNEL - BLUETOOTHPart No. CTS-C15
TIME SWITCH ANALOGUE 24 HR PANEL MOUNTPart No. CTS-UNI45
TIME SWITCH ANALOGUE 24HR Part No. CTS-64B
TIME SWITCH ANALOGUE DIN MOUNT 24 HR WITH BATTERY BACK-UPPart No. CTS-180
TIME SWITCH ANALOGUE 24HR WITH BATTERY BACK-UPPart No. CTS-64BQ
• Digital time switch with 24-hour, 7-day and yearly scheduling capabilities. Bluetooth 4.0 and PC programmable
• DIN mount, large screw terminals, PIN-code security and tamper latch. Made in Germany
• Built in astronomical switch, 8-year power reserve and 500 memory spaces
• Auto summer/winter time, external input, pulse, cycle and wildcard mode
• Efficient, synchronous analogue time switch with daily 24-hour programming capability
• Features large screw terminals with wire protection clamps
• Made in Germany
• Analogue time switch for 24-hour ON/OFF scheduling, easy programming feature with captive pins
• Mounting options include surface mount, recessed mount and DIN mount
• Easy to program single module analogue time switch with 24-hour ON/OFF scheduling capability and battery back-up
• Large screw terminals (max 4mm) and lead sealable housing
• Analogue time switch for 24-hour ON/OFF scheduling, easy programming feature with captive pins
• 150-hour battery power reserve
34 | LIGHTING CONTROL & ENERGY EFFICIENCY
5W USB CHARGER 3WIRE 5.2V 1APart No. HNS070UC
MINUTE MECH TIMER 2-WIRE 240V 1.7APart No. HNS410TM
HOUR MECH TIMER 2-WIRE 240V 1.7APart No. HNS420TM
MINUTE MECH TIMER 3-WIRE 240V 5APart No. HNS440TM
• The HNS070UC suits Apple, Samsung and all other smartphones, tablet brands or portable USB devices
• Fit up to 6x USB chargers in 1x wall plate
• High efficiency, only 50mW standby power
• Suits CABAC, Clipsal, HPM and Legrand style wall plates
• 2-in-1 light switch that automatically turns off after a programmed time
• Time delay from 1-59 minutes, in minute increments
• Setting retained even after loss of power
• Can be retrofitted to most installed lights
• 2-in-1 light switch that automatically turns off after a programmed time
• Time delay from 1-24 hours, in hour increments
• Setting retained even after loss of power
• Can be retrofitted to most installed lights
• 2-in-1 switch that automatically turns off after a programmed time
• Time delay from 1-59 minutes, in minute increments
• Setting retained even after loss of power
• Powers fans, motors, pumps, contactors & inductive loads
35 | LIGHTING CONTROL & ENERGY EFFICIENCY
REMOTE BUTTON FOR DIMMERS AND 3W TIMERSPart No. HNS020RB
SUNSET SWITCH - WEATHERPROOF 16A - IP66Part No. HSC110SS
ROTARY DIGITAL DIMMER SWITCHPart No. HNS620DT
PUSH BUTTON DIGITAL DIMMERPart No. HNS610DT
DUAL SWITCHING DIMMER KITPart No. HNS610DSDK
ROTARY DIGITAL DIMMERPart No. HNS630DT
• Switches 16A load off when not required in daylight, with many other programmable features
• 4 in 1 patented design: Standard, Timer, ECO & Real Time modes
• Rotary digital dimmer and push button ‘on/off’ switch in one
• Perfect for dimmable LED lighting
• Suits HPM, Clipsal, Voltrex and Traders wall plates w/ knobs
• Push Button Digital DimmerTM and ON/OFF switch in one
• Perfect for dimmable LED
• Suits HPM, Clipsal, Voltex and Traders wall plates
• Suits the S-Click HNS610DT 2-wire dimmer only
• Suits S-Click HNS440TM, HNS450TM and HNS460SW 3-Wire Timers only
• Multi-way Dimming and ON/OFF over standard wiring
• Digital Dimmer and ON/OFF switch in one, perfect for dimmable LED
• Contains 1x HNS610DT and 1x HNS020RB
• Rotary digital dimmer
• Perfect for dimmable LED lighting
• Suits HPM, Clipsal, Voltrex and Traders wall plates with knobs
• Separate ‘on/off’ switch required