TYPICAL APPLICATIONS• Township / Residential Estates• Commercial Building• Industrial Factories• Construction Sites• Municipal

Modified hydrophilic Polyvinylchloride (PVC) membranes exhibit better chemical resistance and elongation strength than PES or PAN membranes. It is well suited for city water applications where abrasive particulates are commonly present in grey water sources. The use of PVC membranes translate into lower maintenance and replacement costs.

M●UF-GWS series is designed to treat grey

water from varying sources where feed turbidity does not exceed 50 NTU to produce crystal clear safe water for both domestic, commercial and industrial applications. The system incorporates proprietary 250mm Æ X 1500mm UF membrane modules filled with Poly-vinyl-chloride (PVC) hollow-fibres. The housing has a thick robust reinforced ribbed body that can withstand up to 1.6MPa burst pressure. The indi-vidual fibre is manufactured to remove suspend-ed particulates, colloidal material, bacteria and high molecular weight material down to 0.01 mi-cron. The M.UF- GWS includes feed and back-flush pumps that auto flush sequentially to retard membrane fouling.

Simple & compact grey water treatment through modular ultrafiltration

BRISBANE 15/140 Wecker Rd MANSFIELD Q4121 P: 07 3828 7000

MACKAY 9-15 Industrial StMACKAY Q4740 P: 07 4969 4949

ROCKHAMPTON 94 Elphinstone St, NTH ROCKHAMPTON Q4700 P: 07 4923 6969

TOWNSVILLE P: 0447 796 686

TECHNICAL SPECIFICATION

MODEL FLOWRATE

Nominal m3/hr DIMENSION L x W x H (m)

PIPE SIZE (ins) BACKFLUSH VOLUME m3

WEIGHT (kg)

POWER (kW - v -amp)

GWS-02 6 2.0 X 1.2 X 2.2 2 0.4 800 2 - 415 - 6

GWS-04 12 5.2 X 1.2 X 2.2 3 0.8 1200 2 - 415 - 6

GWS-06 18 3.2 X 1.5 X 2.2 4 1.2 2200 4 - 415 - 10

GWS-08 24 4.4 X 1.5 X 2.2 4 1.6 3100 4 - 415 - 10

GWS-12 36 5.2 X 1.5 X 2.2 4 2.4 3300 5.5 - 415 - 13

GWS-16 48 3.4 X 2.2 X 2.2 6 3.2 4200 5.5 - 415 - 13

GWS-20 60 3.8 X 2.2 X 2.2 6 4.0 5000 11 - 415 – 21.4

GWS-24 72 4.8 X 2.2 X 2.2 6 4.8 6000 11 - 415 – 21.4

GWS-32 96 5.8 X 2.2 X 2.2 8 6.4 7500 11 - 415 – 21.4

Flow rate:

18 ~ 144 m3/hr Configuration:

IN to OUT

Operation:

Service & Backflush with Disinfection

Back-flush:

Continuous Up -Down Cross- flow

Disinfection:

Hypochlorite Dosing

Control:

Fully Automatic Back-flush

Skid mounted system pre-wired & pre-plumbed

Turbidity: < 0.1 NTU SDI: < 1 Silica Removal: >98% Bacteria & Virus Removal: >99.99%

Fibre:

Hollow Fibre Capillary Type

Configuration:

Dead End / Cross-flow

Material:

Modified Hydrophilic PVC

Filtration Rating:

100,000 Dalton

Fibre Dia: 0.9mm ID 1.2mm OD

Recovery Ratio:

> 95%

Operating Pressure:

< 0.15 MPa

Operating Temp.:

5~45° C max

Flux Rate:

60~90 L/HR – m2

pH Range :

2 ~ 12

Feed Turbidity:

< 50 NTU

High system recovery

Automation with PLC

HMI (touch screen)

304SS Feed & Back-flush Pumps

Self- cleaning automatic pre-filter

Low Operating Pressure

Proprietary flushing to ensure thorough wash and disinfection

Coated Steel / Stainless steel frame

Compact design with small footprint

9 Models from 6 ~ 96m3/hr

Minimal Site installation & start-up time

BRISBANE 15/140 Wecker Rd MANSFIELD Q4121 P: 07 3828 7000

MACKAY 9-15 Industrial StMACKAY Q4740 P: 07 4969 4949

ROCKHAMPTON 94 Elphinstone St, NTH ROCKHAMPTON Q4700 P: 07 4923 6969

TOWNSVILLE P: 0447 796 686

□ 5 - Star Dormitory, Tuas Singapore, 2,000m3 per day (60.0 kl per hour)□ Standard Chartered Bank Building, Changi Singapore, 288m3 per day (12.0 kl per hour)□ Citibank Building, Changi Singapore, 288m3 per day (12.0 kl per hour)□ Twenty Anson Building, Business District Singapore, 240m3 per day (10.0 kl per hour)

MATTEN GREY WATER INSTALLATIONS

5-Star Dormitory Twenty Anson Citibank

SYSTEM MEMBRANE SPECIFICATIONS FEATURES

TREATED WATER QUALITY