Site: Lighthouse and Navigational Systems Western Document … · 2019-06-21 · contact project leader or regional manager – western region. 11. occupational health and safety

Site: Lighthouse and Navigational Systems Western Region Title: COP 29 Inspections

Document Number:

Inspection: Robin Poggenpoel Barnie Germishuys T George Makondo

Revision: 0

Date Issued:

10 May 2019

1 of 18

TABLE OF CONTENTS

1. Scope Of Work

2. Definition

3. Contract Price Adjustment Factor

4. Value Added Tax

5. Supervision

6. To Be Supplied By Contractor

7. To Be Supplied By TNPA Lighthouse And Navigational Systems

8. Information To Be Obtained On Site

9. Site Arrangements

10. Occupational Health And Safety Act (Act 85 Of 1993)

11. Special Requirements

12. Measurement And Payment

13. Insurances

14. General

15. Work Specification

16. Bill Of Quantities

17. Signing Off


Document Number:


Revision: 0

Date Issued:

10 May 2019

2 of 18

1. Scope Of Work

For the purpose of this contract the ‘Works’ shall include the examination, inspection, testing, servicing

and repairing to all Lifting Equipment, Plant and Machinery owned by TRANSNET NATIONAL PORTS

AUTHORITY (TNPA), LIGHTHOUSES AND NAVIGATIONAL SYSTEMS (LNS) - WESTERN REGION in

accordance with the OCCUPATIONAL HEALTH AND SAFETY ACT OF 1993 (ACT 85 of 1993) and the

TRANSNET CODE OF PRACTICE 29 (COP 29) and provide certification and register thereof.

2. Definition

Lighthouses and Navigational Systems, Western Region: Lighthouses from Plettenberg Bay to Port

Nolloth including the Port of Cape Town and the Port of Saldanha plant, machinery and equipment shall

be examined, inspected, tested and repairs, in accordance and compliance with the Transnet Code of

Practice 29 (COP 29) requirements for such equipment, in accordance with the Occupational Health and

Safety Act (Act 85 of 1993), or any other relevant Transnet Code or Procedure governing such

equipment.

3. Contract Price Adjustment Factor

Escalation after a twelve month period shall be in accordance to CPI.

4. Value Added Tax

All tendered rates are to be exclusive of VAT.

5. Supervision

The Service Provider shall carry out the “work”, as reflected in the contract at intervals specified by LNS

- Regional Manager, West and shall not appoint or subcontract anyone to perform the “work” or to act

in his/ her capacity.

6. To Be Supplied By Contractor

The Service Provider shall be responsible for providing the required labour, material, personal protective

clothing, transport, and ad hoc costs required for the proper completion of the works.

7. To be supplied by TNPA, Lighthouse and Navigational Systems

TNPA, LNS will provide access to each premise.

8. Information to be obtained on site

The Service Provider shall visit the sites of the proposed work and acquaint themselves with the nature

of work, the condition under which the work is to be performed, the means of access to the site, any

limitations or other authorities and in general with all matters that may influence or affect the contract


Document Number:


Revision: 0

Date Issued:

10 May 2019

3 of 18

and shall be deemed to have allowed in his tender for any additional cost involved due to the foregoing,

as no claims with regard to compensation in connection with the position or nature of the work will be

entertained.

9. Site Arrangements

Contact Project Leader or Regional Manager – Western Region.

11. OCCUPATIONAL HEALTH AND SAFETY ACT (ACT 85 OF 1993)

For the purpose of the contract the Occupational Health and Safety Act 1993 (Act No 85 of 1993) and

Transnet’s Code of Practice 29 governs all works/contractors undertaken, in accordance with the Act

and Control of the relevant Transnet National Ports Authority SHERQ Official.

12. Special requirements

Special attention and compliance to General Safety Regulations as promulgated in terms of the OSH Act

(Act 85 of 1993) and compliance to Transnet Specification E4E, and Transnet’s Code of Practice 29.

13. Measurement and payment

The unit of measurement will be as stipulated in the RFQ Quotation Form. Monthly payment will be

made thirty days from statement as per Transnet National Ports Authority’s Procurement Policy.

14. Insurances

The Contractor shall in effect be liable for, in his own interest, any insurance of which he deems

necessary to cover any loss and/or damage to TNPA Lighthouse and Navigational Systems

property/assets, against any legal liability for accidental death, injury or damage to third party and/or

property arising out of or in connection with, the requirements of this contract.

15. General

15.1 The Service Provider shall not cede, assign, transfer or sub-let the agreement or any part thereof, not

enter into any sub-contract of any nature for the execution hereof without prior written consent of TNPA

Lighthouse and Navigational Systems, Regional Manager, East.

15.2 No amendment or variation of, or addition to this agreement shall be of any force or effect unless reduced

to writing and signed by both parties.

15.3 All Service Providers shall submit with their tenders their Tax Clearance Certificate or electronic access PIN

obtained from SARS’s new Tax Compliance Status (TCS) system.


Document Number:


Revision: 0

Date Issued:

10 May 2019

4 of 18

15. WORK SPECIFICATION

15.1 The Service Provider shall provide the inspection, testing of all Lifting Equipment, Plant and

Machinery as stipulated under the contract for Lighthouse and Navigational Systems assets as

stipulated in the Bill of Quantities.

15.2 The service provider shall complete on a basis, the quarterly report of equipment, examination

and testing of portable and fixed plant, machinery and equipment as indicated on the bill of

quantities in accordance with the Transnet Code of Practice 29 and occupational health and

safety act

15.3 The service provider shall endorse appropriate Logsheets and ensure that all necessary

documentation/certificate(s) are completed.

15.4 The Service Provider shall be granted access onto the premises to conduct

Inspections for quotations when required with the Project Leader or a Lighthouse and

Navigational Systems Technician present.

15.5 The Service Provider shall submit a copy of the company’s Engineering Council ECSA

registration certificate.

15.6 The contract shall be valid for a 24 months period commencing on the 01 August 2017 and

shall conclude on the 31 July 2019


Document Number:


Revision: 0

Date Issued:

10 May 2019

5 of 18

16. BILL of QUANTITIES

ITEM NO MATERIAL SERVICE REQUESTED

0010 MONTHLY REPORTS, EXAMINATIONS OF PORTABLE AND FIXED MACHINERY PLANT

AND LIFTING EQUIPMENT AS PER EQUIPMENT LIST AT WESTERN REGION

LIGHTHOUSES AND NAVIGATIONAL SYSTEMS. REPORT ON NON CONFORMANCES.

ENDORSEMENTS OF APPROPRIATE LOGSHEETS

0020 THREE MONTHLY REPORTS, EXAMINATIONS OF SAFETY HARNESSES AND

LANYARDS AT THE WESTERN REGIONS WORKSHOPS. REPORT ON NON

CONFORMANCES.


0030 SIX MONTHLY REPORTS, INSPECTIONS OF PORTABLE LADDERS AT PORT OF CAPE

TOWN AND PORT OF SALDANHA BAYS WORKSHOPS AND STORES AS PER LADDER

REGISTER

SIX MONTHLY INSPECTIONS OF FIXED LADDERS AND STAIRCASES AT WESTERN

REGIONS LIGHTHOUSES.

REPORT ON NON CONFORMANCES.


0040 ANNUAL LOAD TESTING OF EQUIPMENT SUPPLY LOAD TEST CERTIFICATE AND

REPORT DOCUMENT.

REPORT ON NON CONFORMANCES.


0050 REPORT AND QUOTE ON ADHOC REPAIRS ON COP 29 LIFTING EQUIPMENT



Document Number:


Revision: 0

Date Issued:

10 May 2019

6 of 18

Name of station Location

Monthly examination of the Fixed and Portable Machinery

3 Monthly examination of the safety harnesses and Lanyards

6 Monthly examination of Portable and Fixed Ladders

Annual Load Testing

Port Nolloth Port Nolloth, NC X X

Hondeklipbaai Hondeklip X X

Groenriviermond Groen Rivier X X

Doringbaai Doringbaai X X X

Cape St. Martin St Helena Bay, WC X X

Stompneus Punt St Helena Bay, WC X X

Cape Columbine Paternoster, WC X X

North Head Saldanha Bay, WC X X X

South Head Saldanha Bay, WC X X X

Dassen Island Dassen Island, WC X X

Milnerton Milnerton, WC X X

Robben Island Robben Island, X X

Green Point Green Point, WC X X

Slangkop Kommetjie X X

Cape Point Simon's Bay, WC X X

Roman Rock Simon's Town, WC X X

Cape Hangklip Pringle Bay X X

Danger Point Gansbaai X X

Quion Point Buffelsjag X X

Cape Agulhas Cape Agulhas, WC X X

Cape Infanta Breedie Rivier X X

Ystervarkpunt Gouritzmond X X X

Cape St. Blaize Mossel Bay X X

Cape Seal/Robberg Plettenberg Bay X X

Port of Cape Town Workshop

Coode Cres, Port Of Cape Town

X X X X

Port of Saldanha workshop

Small Craft harbour, Port of

Saldanha X X X X


Document Number:


Revision: 0

Date Issued:

10 May 2019

7 of 18

CODE NUMBER DESCRIPTION CAPACITY S.W.L SIZE WHERE APPLICABLE

CLH-1 SWR SLING 630 KG 8 X 2000

CLH-3

CLH-4 " " "

CLH-5 " " 8 X 4000

CLH-6 " " "

CLH-7 " " "

CLH-8 " " "

CLH-9 " 1500 KG 13 X 2000

CLH-10 " " "

CLH-11 A " " "

CLH-12 " " "

CLH-13 " " 13 X 4000

CLH-14 " " "

CLH-15 A " " "

CLH-16 " " "

CLH-17 " 2500 KG 16 X 2000

CLH-18 A " " "

CLH-19 " " "

CLH-20 " " "

CLH-21 SWR SLING 2500 KG 16 X 4000

CLH-22 A " " "

CLH-23 " " "

CLH-24 " " "

CLH-25 " 3400 KG 20 X4500

CLH-26 " " "

CLH-27 " 4930 KG 24 X 1800

CLH-28 " " "

CLH-29 " 630 KG 8 X 27000

CLH-30 " 1420 KG 13 X 27000

CLH-32 " 6850 KG 28 X 3000

CWN4C / 1131 CIRCULAR SAW HAND MAKITA

CWN4C / 064 ANGLE GRINDER SMALL MAKITA


Document Number:


Revision: 0

Date Issued:

10 May 2019

8 of 18

CWN4C / 1438 " BIG

CWN4C / 724 CUT-OFF MACHINE

CWNOP0153 Porta Pack Gas set "

CWN4C / 2047 Porta Pack Gas set " "

CLH-1 BOW SHACKLE 3250 KG

CLH-2 " "

CLH-3 " "

CLH-4 " "

CLH-5 " "

CLH-6 " "

CLH-7 " "

CLH-8 " "

CLH-9 " 6500 KG

CLH-10 " "

CLH-11 A " "

CLH-12 " "

CLH-13 " 8500 KG

CLH-14 " "

CLH-15 A " "

CLH-16 A " "

CLH-17 WEB LIFTING UNIT 3180 KG

CLH-18 " "

CLH-20 " "

CLH-21 TIFORE HOOK 1500 KG 12 X 4900

CLH-23 " " 12 X 15900

CLH-24 " " "

CLH-25 " " 12 X 88000

CLH-26 " " 12 X 15300

CLH-27 " " 12 X 14800

CLH-29 DRUM LIFTER 250 KG CHAIN

CLH-30 " " "

CLH-32 D - SHACKLE 4300 KG

CLH-33 " "

CLH-34 " "

CLH-36 " "

CLH-28 TIRFOR HOOK 1500 kg 12 X 88000

GANTRY 1 TON


Document Number:


Revision: 0

Date Issued:

10 May 2019

9 of 18

4CWS/6010 CHAIN HOIST 1 TON

CWN OP / 1276 ANGLE GRINDER SMALL

PFB433W FORKLIFT 3 TON

CWN4C / 0253 BENCH POLISHER

CWN4C / 911 HYD. CRANE PAL FINGER 4600 KG CA 873 - 765

" HOOK " "

CWN4C / 0856 BENCH GRINDER SMALL

CWN4C / 840 A CHAIN BLOCK 500 KG

CWN4C / 833 A & B ROPE BLOCK 400 KG

CWN4C / 834 A & B " "

CLH-1 SAFETY BELT

CLH-2 "

CLH-3 "

CLH-4 "

CWN4C / 836 TIRFOR HOIST 1500 KG

CWN4C / 835 " "

CWN4C / 838 CHAIN BLOCK 1000 KG

CWN4C / 840 CHAIN BLOCK 500 KG

CWN4C /0246 Porta Pack Gas sets SMALL

CWN4C / 1077 GAS SET BIG

CWN4C / 129 Porta Pack Gas sets SMALL

CWN4C / 1647 PEDASTEL GRINDER

CWN4C / 861 MOB. COMPRESSOR 690 KPA

20581 AIR RECEIVER 690 KPA

CWN4C / 867 MOB. COMPRESSOR 690 KPA


? MOB. COMPRESSOR 690 KPA


CWN4C / 470 CIRCULAR SAW HAND 325 mm

CWN4C /851 CONCRETE CUTTER HAND 180 mm

CWNCP / 066 CONCRETE CUTTER HAND 125mm

CWN4C / 0256 HYDRAULIC PRESS 10 TON

CWN4C / 0858 POWER SAW

CWN4C / 0859 LATHE SMALL

CWN4C / 0862 BAND SAW STANDARD

CWN4C / 0874 RADIAL ARM DRILLING M/C

CWN4C / 0875 BOX AND PAN BENDER


Document Number:


Revision: 0

Date Issued:

10 May 2019

10 of 18

CWN4C / 0877 METAL ROLLER

CWN4C / 0878 MILLING MACHINE FEXAC 3352A

CWN4C / 0855 PEDESTAL DRILL PRESS 16400

CWN4C / 1366 MORTIFAX MACHINE U 101375

CWN4C / 1367 SANDING M/C 5050008

CWN4C / 1368 DRILL PRESS SMALL 841499

CWN4C / 1369 SPINDLE CUTTER 94000036

CWN4C / 1370 PLAINER

CWN4C / 1371 CIRCULAR SAW 933009

CWN4C / 1428 SAW DUST EXTRACTOR 96/87 C

CWN4C / 1643 RADIAL ARM CIRCULAR SAW

4305849

CTFLH 10649 ELECT. HYDRO BLAST

CWN4C / 671 GENERATOR PETROL HONDA

CWNCP / 084 GENERATOR / BATTERY CHARGER

CWN4C / 0871 HP CLEANER PETROL

4CWS /1/005 ELECT. WELDER MILLER TRANS ARC

CWN4C / 710 ELECT. WELDER TONCO

1 ROLLER CHUTTER DOOR AUTO

2 "

3 PUSH - UP DOOR STORE

4 ROLLER MECH. CURTAIN

5 ROLLER SHUTTER DOOR

6 HORIZONTAL SLIDING GATE

AUTO

CWN4C / 1753 A & B EXT. LADDER 15 STEPS

CWN4C / 1754 A & B " "

CWN4C / 1755 A& B STEP EXT. LADDER 10 STEPS

CWN4C / 1756 A & B " "

CWN4C / 1757 A & B " "

CWN4C/1758 A & B STEP / EXT LADDER 10 STEPS

CWN4C/1759 A & B " "

CWN4C/1761 A & B " "

CWN4C/1762 A& B " "

CWN4C/1763 A& B " "

CWN4C/1764 A & B " "

CWN4C/1765 STEP LADDER 7 STEPS


Document Number:


Revision: 0

Date Issued:

10 May 2019

11 of 18

CWN4C/1766 " 6 STEPS

CWN4C/1767 " "

CWN4C/1768 " "

CWN4C/1771 " "

CWN4C/1772 " "

CTLHWS - 1 A& B EXT LADDER 15 STEPS

CWNOP 043 EXT LADDER 24 STEPS

CPT - 10 MULTIFLEX LADDER

CWN4C/1769 STEP LADDER 4 STEPS

BM29778 SPREADER BEAM 10 000 KG

62836 TWO LEGGED CHAIN SLING

13 940 KG

62834/2 SINGLE LEG CHAIN SLING 8 200 KG




REGISTER / INVENTORY I.D MARKS SWL KG

STEEL WIRE ROPE SLH - 1 630 KG



STEEL WIRE ROPE SLH – 4 1420 KG
















Document Number:


Revision: 0

Date Issued:

10 May 2019

12 of 18


BOW SHACKLE SLH - 1 3250KG

BOW SHACKLE SLH - 2 3250KG

BOW SHACKLE SLH – 3 3250KG

BOW SHACKLE SLH – 4 3250KG

BOW SHACKLE SLH – 5 6500 KG








DEE SHACKLE SLH – 13 6000 KG

DEE SHACKLE SLH – 14 6000 KG

DEE SHACKLE SLH - 15 6000 KG

DEE SHACKLE SLH - 16 6000 KG

POLYESTER WEB SLING SLH- 20




HYD. CRANE CA 324552 CWN4C/ 830 3000 KG

HOOK CA 324552 CTFL4C/830 3000 KG

PORTABLE/ COMPRESS SDB/5116 690 KPA

AIR RECEIVER 2781 690 KPA

BENCH GRINDER SLDFLH - 1 3600 RPM

PEDESTAL GRINDER SDB4B / 5182 1430 RPM

EXT LADDER SDB4B / 5124

SINGLE STEP LADDER SDB4B / 5125

MULTIFLEX LADDER SDB4B / 5255

STEP LADDER SDB4B / 5269

SINGLE STEP LADDER SLH - 1

FULL BODY SAETY HARNESS SLH - 2 25000KG

FULL BODY SAETY HARNESS SLH - 3 13000KG

CHAIN BLOCK SDB4B / 138 1000 KG

HYSTER FORKLIFT PGB048W 12 TON

BIG CUTTING SET - OXY & ACET SLH - 1

PORTA PACK - OXY & ACET SLH - 2

ANGLE GRINDER BIG SDB4B / 5106


Document Number:


Revision: 0

Date Issued:

10 May 2019

13 of 18

ANGLE GRINDER BIG SDB4B / 5130

ANGLE GRINDER SMALL SDB4B / 5130

CUT - OFF M/C SDB / 4B / 5263

CIRCLE SAW SDB / 4B / 5235

CONCRETE CUTTER SDB / 4B / 5160

ROUTER CWNCP/119 METABO

PED GRINDER M/C SDB / 4B / 5107 REXIN

PED GRINDER M/C SDB / 4B / 5241 ROBOR

LATHE SDB / 4B / 5242 HARRISON

BAND SAW SDB / 4B / 5240 FORTE

PORT/GENERATOR SDB / 4B / 5236 HONDA

PORT/HYDRO BLAST SDB / 4B / 5234 HONDA

CASTER WHEEL SLH - 1A / 1




END FRAME SLH – 1B /1 BIG

" SLH – 1B / 2 BIG

" SLH – 1B/ 3 BIG

" SLH – 1B/ 4 BIG

END FRAME SLH – 1C / 1 SMALL

" " SLH – 1C/ 2 SMALL

END FRAME HAND RAILING SLH – 1D / 1

END FRAME HAND RAILING SLH – 1D / 2

WORKING PLATFORM SLH – 1E / 1

BRACE BAR SLH – 1F / 1 LONG

" " SLH – 1F / 2 LONG

" " SLH – 1F / 3 LONG

" " SLH – 1F / 4 LONG

" " SLH – 1F / 5 LONG

" " SLH – 1F/ 6 LONG

" " SLH – 17/ 7 LONG

BRACE BAR SLH – 1G / 1 SHORT

" " SLH – 1G / 2 SHORT


" " SLH – 1H / 4 SHORT

STABILIZER LEG SLH – 1G / 5 SHORT



Document Number:


Revision: 0

Date Issued:

10 May 2019

14 of 18

CODE NUMBER DESCRIPTION CAPACITY S.W.L SIZE WHERE APLICABLE

PNL-1 ALLUMINIUM EXT .LADDER

10 STEP

PNL-2 ALLUMINIUM STEP LADDER

4 STEP

PNL-3 ALLUMINIUM TOWER EXCESS LADDER

PNL-4 D/A SET ML10 DEUTZ O/C

PNL-5 LAWNMOWER

PNL-6 WEED EATER STIHL FS 420

PNL-7 WORKING PLATFORM

HK-1 FIX LADDER

GRM-1 ALLUMINIUM LADDER 11 STEP

GRM-2 D/A SET ML10 DEUTZ O/C

GRM-3 D/A SET F2L912 ENGINE

DRB-1 D/A SET F2L912 ENGINE

DRB-2 LUMINARE ACCESS LADDER

CSM-1 PLATFORM HOOK ON LADDER

CSM-2 WORKING PLATFORM

SNP-1 LADDER FIXED

CCB- 1 ALLUMINIUM EXT. LADDER

10 STEP 3 METER

CCB- 3 ALLUMINIUM STEP LADDER

1,2 METER

CCB- 5 WEED EATER MARU YAMA

CCB- 6 LAWN MOWER


Document Number:


Revision: 0

Date Issued:

10 May 2019

15 of 18

CCB- 7 DRILLING M/C RYOBI

CCB- 8 ANGLE GRINDER 115mm BOSCH

CCB- 9 HIGH PRESSURE WATER GUN

K ARCHER

CCB- 10 D/A SET F4L912 DEUTZ

CCB- 12 DRILLING M/C 570 W BOSCH

MCI-1 WORKING PLATFORM 200 KG LEADING LIGHT

MCI-2 HOOK ON LADDER FOR PLATFORM

MCI-3 INSIDE LADDER FIXED

MCI-4 OUTSIDE LADDER FIXED

SHD-1 D/A SET ML10 DEUTZ O/C

SHD-5 LUMINARE ACCESS LADDER

BLUE

NHD-1 D/A SET ML10 DEUTZ O/C

NHD-2 D/A SET

NHD-4 STEEL ACCESS LADDER

MLT-1 D/A SET F2L912 ENG.

MLT-2 STEEL LADDERS INSIDE TOWER

FIXED


DSI- 1 DOME LADDER BALCONY TO CAT WALK

DSI- 2 DOME LADDER CATWALK TO DOME

DSI- 3 FIX LADDER STEEL WATER TANKS ACCESS

DSI- 5 A & 5 B ALLUMINIUM EXT. LADDER

19 STEPS

DSI- 6 ALLUMINIUM STEP LADDER

6 STEPS

DSI- 7 A & 7 B ALLUMINIUM EXT. LADDER

10 STEPS


Document Number:


Revision: 0

Date Issued:

10 May 2019

16 of 18

DSI- 8 WATER PUMP HONDA GX 120 4.0

DSI- 9 BENCH GRINDER FEMCO

DSI- 10 D/A SET ML10 DEUTZ O/C

DSI- 11 D/A SET F4L912 DEUTZ

DSI- 14 DRILLING MACHINE RYOBI

SLK-1 A ALLUMINIUM STEP LADDER

10 STEP

SLK-2A & 2B ALLUMINIUM EXIT. LADDER

10 STEP

SLK-3 ALLUMINIUM STEP LADDER

6 STEP

SLK-4 ALLUMINIUM OPTIC LADDER

SLK-5 ALLUMINIUM STEP LADDER

7 STEP

SLK-6 A,B7C DOME LADDERS

SLK-7 WEED EATER STIHL

SLK-8 LAWN MOWER HONDA 11.0 ENG. ALPHA MARK 1

SLK-9 D/A SET ML10 DEUTZ O/C

SLK-10 BENCH GRINDER

GPT.1 D/A SET F2L912 ENGINE

GPT.2 FOLD UP LADDER 12 STEP

CODE NUMBER DESCRIPTION CAPACITY S.W.L SIZE WHERE

APLICABLE

RBI. 1 D/A SET ML10 DEUTZ O/C

RBI. 2 BENCH GRINDER 150 mm

RBI. 3 ORBITAL SANDER BOSCH

RBI. 4 EXTENSION LADDER 10 STEP

CPT.1 D/A SET ML10 DEUTZ O/C

CPT.2 LAWN MOWER HONDA HRU 196

CPT.3 WEED EATER STIHL

HGK. 1 D/A SET F2L912 ENGINE

HGK. 2A & 2B TOWER LADDER FIXED


Document Number:


Revision: 0

Date Issued:

10 May 2019

17 of 18

DAP.1 A DOME LADDER

DAP.2 ALUMINIUM STEP LADDER

6 STEP 1.8 METER

DAP.3 ALUMINIUM STEP LADDER

10 STEP 3 METER

DAP.4 BENCH GRINDER 150 mm

DAP.5 WEED EATER STIHL FS 550

DAP.6 LAWN MOWER ALPHA MARK 1

DAP.7 WATER PUMP HONDA GX160/5.5

DAP.8 D/A SET ML10 DEUTZ O/C

DAP.9 DRILLING MACHINE 750 W RIOBI HAND DRILL

DAP.10A & 10B ALUMINIUM EXTENSION LADDER

10 STEP

DAP - 1B DOME LADDER FIX

DAP - 1C DOME LADDER REMOVABLE

DAP - 11 HORIZONTAL STEEL SLIDING GATE

AUTOMATIC


QUP. 1A TOWER LADDER FIX

QUP. 2B TOWER LADDER ACCESS

AGH.1 BENCH GRINDER 150 mm

AGH.2 ALUMINIUM STEP LADDER

6 STEP 1.8 METER

AGH.3 ALUMINIUM STEP LADDER

10 STEP 3 METER

AGH.4A & 4B ALUMINIUM EXT. LADDER

10 STEP 3 METER

AGH.5 WEED EATER MARUYAMA

AGH.6 HAND DRILLING MACHINE

750 W RYOBI

AGH.7 D/A SET ML10 DEUTZ O/C

AGH.9 HEAT GUN 1500 W SKIL

CIF.1A TOWER LADDER FIX

CIF.1B TOWER LADDER ACCESS

CIF.2 D/A SET F2L912 ENGINE


Document Number:


Revision: 0

Date Issued:

10 May 2019

18 of 18

CIF.4 ALUMINIUM TIP UP GARAGE DOOR

YVP.1 ALUMINIUM STEP LADDER

8 STEP 2.3 METER

YVP.2 LAWNMOWER HOPPER 535

YVP.4 D/A SET ML10 DEUTZ O/C

YVP.5 DOME LADDER

YVP.6 STEEL LIFTING HOOK 200 KG CODE NUMBER DESCRIPTION CAPACITY S.W.L SIZE WHERE

APLICABLE

CSB.2 ALUMINIUM STEP LADDER

4 STEP 1.2 METER


6 STEP 1.8 METER


10 STEP 3 METER

CSB.5 ALUMINIUM EXT. LADDER

10 STEP 3 METER

CSB.6 ALLUVIUM EXT. LADDER

15 STEP 4.5 METER

CSB.7 LAWN MOWER SOUTHERN CROSS

CSB.8 WEED EATER

CSB.9 D/A SET ML10 DEUTZ O/C

CSB.10 HAND HELD ELECT. DRILLING M/C

BOSH 550-2

CSB.11 HAND HELD ELECT. SANDING M/C

BOSH GS 516A

CSB.12 ANGLE GRINDER 115mm / MATABO W7

CSB.13 ELECTRICAL PAINT STRIPPER

MOS. 2 BENCH GRINDER GREUSEN / 150mm

MOS. 3 GAS CUTTING SET PORTA PACK

MOS. 4 PEDESTAL DRILL PRESS

15 mm max

MOS. 5 ELECTRICAL ORBITAL SANDER

BOSCH

MOS. 6 ANGLE GRINDER 115 mm

MOS. 7 HAND HELD DRILLING 13mm max


Document Number:


Revision: 0

Date Issued:

10 May 2019

19 of 18

M/C

MOS. 8 JIG SAW BOSCH PST 50 A

MOS. 10 ELECTRIC WELDING M/C

KWIKWELD D 160

ROB.1A TOWER LADDER FIX

ROB.1B TOWER LADDER ACCESS

CIF.3 WEED EATER STIHL


KNY.1 FRONT LEADING LIGHT

KNY.2 REAR LEADING LIGHT

VBI-1 FRONT LEADING LIGHT

Mossel Bay

VBI-2 REAR LEADING LIGHT Mossel Bay

DOS-1 FRONT LEADING LIGHT

Mossel Bay

DOS-2 REAR LEADING LIGHT Mossel Bay


Document Number:


Revision: 0

Date Issued:

10 May 2019

20 of 18

18. Signatures

Name: Thomas George Makondo

Designation: Operations Supervisor - SWC

Signature: ____________________

Date: ________/____/___

Name: Robin Poggenpoel

Designation: Regional Manager - WEST

Signature: ____________________

Date:

________/____/___

2019 06 05

2019 06 05

Documents

Site: Lighthouse and Navigational Systems Western Document … · 2019-06-21 · contact project leader or regional manager – western region. 11. occupational health and safety