SITE/ROADWAY LE Era Lantern · 2017-07-26 · KIM LIGHTING 1 Era® Lantern Introducing the Era ® Lantern Series Kim Lighting’s Era Lantern Series is an extensive family of customizable

SITE /ROADWAY LE

Era® LanternPerformance with Heritage Styling

2 KIM LIGHTING

Mailing Address: P.O. Box 60080 City of Industry, CA 91716-0080

Business Address: 16555 East Gale Avenue City of Industry, CA 91745U.S.A.Phone 626 / 968-5666FAX 626 / 369-2695

Entire contents © copyright 2015 Kim Lighting Inc.all rights reservedreproduction in whole or in partwithout permission is strictly prohibited.U.S. patents pending

www.kimlighting.com

Printed in U.S.A. 93017294 Version 1.6 (6/30/15)

Kim’s Theory of Relativity

Proportion Guide

Decorative Accents

Arm Options

Mechanical Features

Optical Design Features

Ordering Information

Luminaire Specifications

Option Specifications

Wall Mounting Options

Arm Mounting Options

Pipe Tenon Mounting Options

Lamp and Electrical Guide

The Future is Today

2

4

6

8

10

11

12-13

18

20

21

22

24

26

28

TABLE OF CONTENTS

Finally. Modern Performance meets Period Style.Landscape and area lighting designers are often commissioned to integrate new equipment into a variety of architectural styles, periods, and themes. One project might require traditional European flare, while another demands American, Spanish or Roman accents. New construction, restoration, and modernization projects also require state of the art lighting technology to meet modern building, electrical, and safety codes. Until now, specifiers were often forced to install decorative non-performing pedestrian height fixtures to meet historic architectural design standards, and then add redundant high-level equipment to achieve required illumination levels. Finding a 2-in-1 high performance area light that also blends with the surrounding period environment has always been difficult, but Kim Lighting’s Era® Lantern Series finally solves this dilemma.

Era® Lantern Series

KIM LIGHTING 1

Era® Lantern

Introducing the Era® Lantern Series

Kim Lighting’s Era Lantern Series is an extensive family of customizable high performance pole or wall mounted heritage luminaires for roadway, landscape, and area site lighting projects. The base series consists of heavy duty die-cast lantern structures that can be design enhanced with various structural support details, decorative accents, finishes, finials, and multiple wall or pole mount armature selections.

Era Lantern then couples variable traditional styling with premium reflector optics, now standard with highly efficient 95% reflectivity.

Era Lantern is also available with an attractive full lantern-style diffuse lens or StarView® dark sky compliant version with flat glass lens and horizontal lamp. Choose from four IES light distribution patterns, a variety of mounting accessories and luminaire options, as well as a wide selection of lamp sources and electrical components to complete your luminaire.

KIM LIGHTING 1

The Complete Design Solution

From Parking Lot to Building • Proper Scale • Coordinated Design

2 KIM LIGHTING

Site/Roadway Zone Pedestrian Zone

The Site/Roadway Zone requires large scale sources, mounted high and spaced widely. Parking lots and roadways require luminaires on 20'-40' poles to efficiently light these large areas. Therefore, this lighting sets the design style for all other lighting zones as you progress towards the building. Select large version Era® Lantern luminaires for this zone.

Pedestrian Zone luminaires are mounted lower and provide higher illumination levels to draw attention and enhance security. As an observer leaves the parking lot and transitions to pedestrian areas, poles should decrease in height to 10' - 16'. In addition, luminaires should decrease in scale, as human perception of proportion is keen at this level. Select small version Era Lantern luminaires for this zone, and select a finish that will integrate well with the fixture’s primary background elements.

Kim’s Theory of Relativity

The Complete Design Solution

From Parking Lot to Building • Proper Scale • Coordinated Design

KIM LIGHTING 3

At Kim Lighting, products are developed in context as they relate to Detail, Performance and Proportion: Detail, to connect fixture appearance to the site and architectural elements; Performance, to provide high visibility while using energy efficiently; and Proportion, to reflect the proximity to structures as well as site occupants.

Lighting practice is a blend of aesthetic design, performance and effect. Integrating outdoor lighting with site architecture is the key to Kim Lighting’s Theory of Relativity.

Landscape/Pathway Zone Building/Perimeter Zone

Landscape/Path Zone fixtures are closest to occupants, delineate paths and connect the site with the structure itself. Near the building, luminaires should continue to disappear, blending into the landscape and hardscape elements. Select from a wide range of low voltage, line voltage, and LED landscape luminaires from Kim Lighting.

The Building/Perimeter Zone requires design intimate with physical architectural elements. Lighting practice is a blend of aesthetic design, performance and effect. Avoid installing pole-mounted luminaires close to the building, as they tend to dominate the architecture. Instead, Kim Lighting suggests wall mounted Era Lantern luminaires when a particular period style is desired.

Era® Bollard

This proportion diagram is intended to help visualizeand select the best Era® Lantern system to satisfy aestheticrequirements. Remember, the pole height also affectsperformance; the higher the fixture is mounted, the greater the light throw. If poles are mounted on concretepedestals such as in parking lots, the height of the pedestalmust be considered in selecting the pole height.

LEB26SC/HA32LWWall Mount

LET19DC/HA12SWWall Mount

LET19SC/HA12S16' Stepped Smooth Pole

LET19SS/HA02S12' Stepped Fluted Pole

LEB19DC/HA13S16' Stepped Fluted Pole

LET26SS/HA14L20' Straight Smooth Pole

LET26DC/HA37L30' Stepped Fluted Pole

LEB26SC/HA32L25' Stepped Fluted Pole

5" DIA.

3.4" DIA.

5" DIA.

3.4" DIA.

6" DIA.

4" DIA.

5" DIA. 6" DIA.

4" DIA.

6" DIA.

4" DIA.

Era® Lantern

4 KIM LIGHTING

Proportion Guide

This proportion diagram is intended to help visualizeand select the best Era® Lantern system to satisfy aestheticrequirements. Remember, the pole height also affectsperformance; the higher the fixture is mounted, the greater the light throw. If poles are mounted on concretepedestals such as in parking lots, the height of the pedestalmust be considered in selecting the pole height.

LEB26SC/HA32LWWall Mount

LET19DC/HA12SWWall Mount

LET19SC/HA12S16' Stepped Smooth Pole

LET19SS/HA02S12' Stepped Fluted Pole

LEB19DC/HA13S16' Stepped Fluted Pole

LET26SS/HA14L20' Straight Smooth Pole

LET26DC/HA37L30' Stepped Fluted Pole

LEB26SC/HA32L25' Stepped Fluted Pole

5" DIA.

3.4" DIA.

5" DIA.

3.4" DIA.

6" DIA.

4" DIA.

5" DIA. 6" DIA.

4" DIA.

6" DIA.

4" DIA.

Era® Lantern

KIM LIGHTING 5

6 KIM LIGHTING

A benefit of Era® Lantern allows designers to add a variety of decorative housing accents to create a unique luminaire for almost any historical period or architectural style.

Medallions with Double Curved ArmsTypical of neoclassic architecture, the medallion option (MDL) can be added to Era Lantern to soften the luminaire’s structural elements and provide a strong visual connection between the lower lantern and upper hood. The medallion is recommended for Victorian, Edwardian Baroque, and other old world European influenced architectural styles, as well as heritage parks and landscaped areas. Die-cast aluminum construction, painted to match fixture.

The medallion decorative option is only available on Era Lantern housings with the double curved structural support arm (LETDC or LEBDC only). Refer to ordering information on pages 16-17.

Decorative Accents

Era® Lantern

KIM LIGHTING 7

Leaflets with Single Straight ArmsFor a Corinthian flourish, specify the leaflet decorative option (LEAF) to suggest Greek or Roman revival, and coordinate the fixture with any Renaissance styled architectural accents or settings. Die-cast aluminum construction, painted to match fixture.

The leaflet option is only available on Era Lantern housings with the single straight structural support arm (LETSS or LEBSS only). Refer to ordering information on pages 12-13.

Top Housing FinialSuitable for all historical periods, the top housing finial option (TF) provides a distinct decorative accent that visually unifies the luminaire with a bottom mount decorative arm or post top. Die-cast aluminum construction, painted to match fixture. Not available on top mount models.

Era Lantern top finials are only available on Era Lantern bottom mount housings (LEBSS, LEBSC, and LEBDC only). Finials can also be specified for Kim Lighting’s Heritage Arms and Heritage poles to coordinate the entire assembly. Refer to Kim’s Arms and Poles Selection Guide for details or download it now at www.kimlighting.com.

Era® Lantern

8 KIM LIGHTING8 KIM LIGHTING

LET/HA01 – Post Top Crook Arm

LET/HA11 – Side Pole or Wall Mount Swept Cast Arm

LEB/HA11 – Side Pole or Wall Mount Swept Cast Arm

LET/HA02 – Side Pole or Wall Mount Crook Arm

LEB/HA12 – Side Pole or Wall Mount S-Shaped Up Cast Arm

LET/HA12 – Side Pole or Wall Mount S-Shaped Up Cast Arm

LEB/HA13 – Side Pole or Wall Mount S-Shaped Down Cast Arm

LET/HA13 – Side Pole or Wall Mount S-Shaped Down Cast Arm

LET/HA03 – Post Top Swept Cast Arm

8 KIM LIGHTING

Era® Lantern Arm Options

Era® Lantern

KIM LIGHTING 9KIM LIGHTING 9

LET/HA33 – Side Pole or Wall Mount Ribbon Arm with Top Gusset

LEB/HA34 – Side Pole or Wall Mount Ribbon Arm with Bottom Gusset

LET/HA35 – Side Pole Ribbon Arm with Top Brace

LEB/HA36 – Side Pole Ribbon Arm with Bottom Brace

LET/HA37 – Side Pole Ribbon Arm with Top Brace and Bottom Scroll

LET/HA38 – Side Pole Ribbon Arm with Top Brace and Bottom Gusset

LET/HA14 – Side Pole or Wall Mount Neo-Classic Arm

LET/HA31 – Side Pole or Wall Mount Ribbon Arm with Top Scroll

LEB/HA32 – Side Pole or Wall Mount Ribbon Arm with Bottom Scroll

KIM LIGHTING 9

Refer to pages 22-23 for arm dimensions and EPA ratings. Refer to Kim Lighting’s Arms and Poles Selection Guide for complete specification and ordering information.

Era® Lantern

1. Power wash and degrease.2. Detergent tank bath.3. Clear water rinse bath.4. Premium Titanated Zirconium

conversion coating as used in the automobile industry.

5. Clear water rinse bath.6. Dry off oven.7. Powder coating, 2.5 mil

nominal thickness.8. Bake for 20 minutes at 410°F.

Premium Eight Stage Finish

Durable Powder Coat FinishKim Lighting’s state-of-the-art powder coat paint system is engineered to provide the highest quality finish with absolute paint adhesion under weather extremes. The Super TGIC thermoset polyester powder coat finish is applied over a titanated zirconium conversion coating. This finish system exceeds the A.S.T.M. 1000 hour salt spray test, enduring over 2500 hours without failure.

Die-Cast Aluminum ComponentsThe Era Lantern housing, lens frame, hub, arms and decorative accents are die-cast, low copper (<0.6%) aluminum for precision, repeatability and corrosion resistance. The housing and lens frame is reinforced and sealed with a continuous O-ring silicone gasket.

Easy Maintenance1. The hood is secured with a tool-less latch, and is hinged for relamping. A self-locking stop arm retains the hood/lamp compartment in the open position for easy maintenance.2. Each die-cast reflector forms a sealed chamber to eliminate airborne contaminants. The die-cast reflector snaps out without the need for tools. A quick disconnect plug detaches the reflector wires from the ballast module.3. The ballast and related electrical components are mounted to a single bracket, creating a removable electrical module. All components are pre-wired at the factory with quick-disconnect plugs, and keyhole slots to facilitate mounting inside the housing.

Aluminum

Titanated Zirconium Conversion Coating

Powder Coat

1.

2. 3.

10 KIM LIGHTING

Mechanical Features

Standard Super TGIC ColorsBL BlackDB Dark BronzeLG Light GraySG Stealth GrayPS Platinum SilverWH White

Era® Lantern

••

•

A. Reflected light does not pass through the lamp envelope, which otherwise will reduce lamp life and efficiency.

B. Split beams of reflected light pass freely and efficiently out of the luminaire.

A

B

B

Download the Kim Site / Roadway Optical Systems Catalog for complete details and explanation of optical system features at www.kimlighting.com. (Online Access Only).

Split Beam Reflector GeometryWide-beam vertical lamp reflectors will redirect light back into the lamp unless properly designed. Kim reflectors are precision engineered to avoid this by using split-beam reflector geometry.

Type II Type III Type IV Type V Type III Type VHorizontal Vertical

Horizontal LampAvailable in Type II, Type III, Type IV, and Type V Square distri-butions. This flat lens system provides full cutoff control and excellent uniformity.Sealed optics and performance reflector technology allow this horizontal lamp optical system to maximize lamp output. An optional houseside shield is available for Types II, III, and IV distributions.

Vertical LampAvailable in Asymmetric and Symmetric distributions. Provides vertical lamp performance in a compact luminaire profile with excellent uniformity.This reflector utilizes Kim’s split beam reflector geometry, optimizing lamp output and life (see below). An optional houseside shield is available for the asymmetric distribution.

Rotatable OpticsAll asymmetric reflectors are rotatable in 90° increments during installation. This allows design flexibility in producing very high illumination levels for special applications or for maintaining a consistent fixture orientation throughout the site. To ensure proper installation, each reflector is labeled to show the orientation of the light pattern.Rotatable reflectors offer a degree of refinement in fixture orientation when the architecture and site demand perfection.

When twin-mounted luminaires are used for site lighting using Type II, III or IV distributions, the combined effect from the twin mount is a rectangular light pattern.

To change the orientation of the rectangular pattern, one normally changes the orientation of the twin mount. An alternative to this is shown at right, where the fixture orientation remains constant and the internal reflectors rotate to change the orientation of the rectangular light pattern. This can maintain identical fixture orientations throughout the site.

For applications demanding high light levels, such as tennis courts and automobile dealerships, reflectors can be rotated in parallel to double light levels. Houseside shields can be added to eliminate spill light into unwanted areas behind the luminaires.

Vertical Asymmetric, Type III

Horizontal Type II, Type III, Type IV

Full Cutoff StarView CompliantKim Lighting’s StarView products meet IES and IDA full cutoff requirements for use where light pollution or light trespass may be a concern, and to promote the enjoyment of celestial visibility at night.

Era Lantern vertical and horizontal with flat lens produces full cutoff with zero light above 90° horizontal.

LIGHTING

Optical Design Features

Era® Lantern

SS – Single Straight Arm

2 Fixture: Cat. No. designates fixture and

light distribution. Coated lamps recommended

Cat. No.: FM PT 1A 2B 3Y 4C 1W

Wall Mount

Plan View:1 Mounting: EPA 19" Post top: 1.0

EPA 26" Post top: 1.5 NOTE: Refer to pages 22-23

for fixture / Arm EPA

Light Distribution: Type II Type III Type IV Type V Square Forward Throw Cat. No.: 19" Bottom Mount LEB19SSH2 LEB19SSH3 LEB19SSH4 LEB19SSH5 26" Bottom Mount LEB26SSH2 LEB26SSH3 LEB26SSH4 LEB26SSH5 19" Top Mount LET19SSH2 LET19SSH3 LET19SSH4 LET19SSH5 26" Top Mount LET26SSH2 LET26SSH3 LET26SSH4 LET26SSH5

Horizontal Lamp Flat Glass Lens

NOTE: FM Flush Mount for direct mounting to top of pole. 3C", 4", 5", and 6" available. PT Pipe Tenon Mount for poles by others where a tenon is supplied. 2" pipe (2C" x 4" length) using the Pipe Tenon Mounting options on page 26. 1A, 2B, 3Y and 4C Side Mount orientation using the Era® arms on pages 22-23. 1W Single Wall Mount configuration using the Era arms and wall plates. 1W Wall Mount arm not included and must be ordered separately. See page 21 for ordering.

Ordering Example: For standard fixture and pole

Light Distribution: Type III Type VCat. No.: 19" Bottom Mount LEB19SSV3 LEB19SSV5 26" Bottom Mount LEB26SSV3 LEB26SSV5 19" Top Mount LET19SSV3 LET19SSV5 26" Top Mount LET26SSV3 LET26SSV5

Vertical Lamp Sag Glass Lens

Bottom Mount

Top MountLET19SS LET26SS

LEB19SS LEB26SS

Arm Mount Only

Post Top Arm Mount

PMH = Pulse Start Metal Halide HPS = High Pressure Sodium PL = Compact Fluorescent IF = Induction Fluorescent

See lamp and electrical data on pages 26-27

Lamp Lamp Line Watts Type Volts

150 PMH 277

57PL120 57PL208 57PL240 57PL277

42PL120 42PL208 42PL240 42PL277

85IF1205 85IF2085 85IF2405 85IF2775 85IF3475

70PMH1203 70PMH2083 70PMH2403 70PMH2773 70PMH347 70PMH480


Pulse Start Metal Halide6

Compact FluorescentHigh Pressure Sodium Induction Fluorescent


70HPS1203 70HPS2083 70HPS2403 70HPS2773 70HPS347 70HPS480


High Pressure Sodium250HPS1203 250HPS2083 250HPS2403 250HPS2773 250HPS347 250HPS480



175PMH1203,4 175PMH2083,4 175PMH2403,4 175PMH2773,4 175PMH3474 175PMH4804


LEB19SS / LET19SS

LEB26SS / LET26SS

3 Electrical Module:







Available with optional Electronic Ballast. Add E to Electrical Module number. e.g.: 150PMH277E3

12 KIM LIGHTING


3 Optional Electronic Ballast is variable voltage ballast for use in 120 through 277 voltages and 50 or 60 Hz. (208V through 277V on 250W and above.) For use with Pulse Start Metal Halide lamps only. Consult factory for other voltages.

4 Vertical only.5 Kim Lighting recommends coated lamps with Era Lantern.NOTE: Due to the Energy Independence and Security Act (EISA) of 2007, Kim Lighting can no longer supply probe start metal halide ballasts with its luminaires, effective January 1, 2009. Contact Kim Lighting for availability of replacement ballasts for warranty service claims.(Visit www..aboutlightingcontrols.org or the Library of Congress website for more details.)

Era® Lantern

Mounting Fixture Electrical Module Finish Options Pole1,2 Arm Finish

1A/LEB19SSH3/150PMH277/WH/TF/HSAS16-534188A-HA11S/WH

1Omit for 1W Wall Mount. 2See separate Kim Arms and Poles Selection Guide.

1 2 3 4 5-9 10 11

SS – Single Straight Arm

4 Finish: Super TGIC powder coat

paint over titanated zirconium conversion coating. (see page 10)

Color: Black Dark Bronze Light Gray Stealth Gray Platinum Silver White Custom Colors Cat. No.: BL DB LG SG PS WH CC Consult your Kim Lighting representative for custom colors.

Cat. No.: HS For use with all fixtures with flat glass lens. Not for use with Type V light distributions.Cat. No.: HSC For use with all fixtures with sag glass lens. Not for use with Type V light distributions.

8 Optional Houseside Shield:

10 Optional Poles:

11 Era Arm:

9 Optional Fusing:

HS for flat lens

LeafletsCat. No.: 19" LEAF Heavy cast aluminum leaflets on 26" LEAF top and bottom of luminaire arms. (SS) only.FinialCat. No.: 19" TF Heavy cast aluminum finial on 26" TF top of housing. Bottom mount (BM) luminaires only.

5 Optional Decorative Accents:

6 Optional Convex Glass Lens:

Cat. No.: CGL Tempered convex glass lens replaces standard flat lens.. Note: Brightness control goes from Full Cutoff to Cutoff.

Refer to Kim Lighting’s Arms and Poles Selection Guide for pole options. Contact factory for optical centerline data.

7 Optional Photocell: Factory installed photocell in housing with fully gasketed sensor on side wall.

Line Volts: 120V 208V 240V 277V 347V 480V Cat. No.: SF DF DF SF SF DF

HSC for sag glass lens

Photocell

Line Volts: 120V 208V 240V 277V 480V 347V Cat. No.: A-30 A-31 A-32 A-33 A-34 A-35

Single Fuse

See pages 22-23 for Era Arm ordering information

KIM LIGHTING 13

Leaflets Finials

Note: Refer to Kim Lighting’s Arms and Poles Selection guide to specify pole and arm mounted finials.

Era® Lantern

Convex Glass Lens

14 KIM LIGHTING




Wall Mount




Light Distribution: Type II Type III Type IV Type V Square Forward Throw Cat. No.: 19" Bottom Mount LEB19SCH2 LEB19SCH3 LEB1SCSH4 LEB19SCH5 26" Bottom Mount LEB26SCH2 LEB26SCH3 LEB26SCH4 LEB26SCH5 19" Top Mount LET19SCH2 LET19SCH3 LET19SCH4 LET19SCH5 26" Top Mount LET26SCH2 LET26SCH3 LET26SCH4 LET26SCH5

Horizontal Lamp Flat Glass Lens


Light Distribution: Type III Type VCat. No.: 19" Bottom Mount LEB19SCV3 LEB19SCV5 26" Bottom Mount LEB26SCV3 LEB26SCV5 19" Top Mount LET19SCV3 LET19SCV5 26" Top Mount LET26SCV3 LET26SCV5


Bottom Mount

Top MountLET19SC LET26SC

LEB19SC LEB26SC

Arm Mount Only

Post Top Arm Mount

LEB19SC / LET19SC

LEB26SC / LET26SC


14 KIM LIGHTING





150 PMH 277

57PL120 57PL208 57PL240 57PL277

42PL120 42PL208 42PL240 42PL277

85IF1205 85IF2085 85IF2405 85IF2775 85IF3475











175PMH1203,4

175PMH2083,4 175PMH2403,4 175PMH2773,4 175PMH3474 175PMH4804












SC – Single Curved ArmEra® Lantern


1A/LEB19SCH3/150PMH277/WH/TF/HSAS16-534188A-HA11S/WH


1 2 3 4 5-9 10 11

KIM LIGHTING 15





10 Optional Poles:

9 Optional Fusing:

FinialCat. No.: 19" TF Heavy cast aluminum finial on 26" TF top of housing. Bottom mount (BM) luminaires only.


Refer to Kim Lighting’s Arms and Poles Selection Guide for pole options. Contact factory for optical centerline data.

11 Era Arm: See pages 22-23 for Era Arm ordering information




Single Fuse

HS for flat lens


KIM LIGHTING 15

Photocell

Finials


Note: Refer to Kim Lighting’s Arms and Poles Selection Guide to specify pole and arm mounted finials.

SC – Single Curved ArmEra® Lantern



Convex Glass Lens

16 KIM LIGHTING




Wall Mount




Light Distribution: Type II Type III Type IV Type V Square Forward Throw Cat. No.: 19" Bottom Mount LEB19DCH2 LEB19DCH3 LEB19DCH4 LEB19DCH5 26" Bottom Mount LEB26DCH2 LEB26DCH3 LEB26DCH4 LEB26DCH5 19" Top Mount LET19DCH2 LET19DCH3 LET19DCH4 LET19DCH5 26" Top Mount LET26DCH2 LET26DCH3 LET26DCH4 LET26DCH5

Horizontal Lamp Flat Glass Lens – StarView®


Light Distribution: Type III Type VCat. No.: 19" Bottom Mount LEB19DCV3 LEB19DCV5 26" Bottom Mount LEB26DCV3 LEB26DCV5 19" Top Mount LET19DCV3 LET19DCV5 26" Top Mount LET26DCV3 LET26DCV5


Bottom Mount

Top MountLET19DC LET26DC

LEB19DC LEB26DC

Arm Mount Only

Post Top Arm Mount

LEB19DC / LET19DC

LEB26DC / LET26DC


16 KIM LIGHTING





150 PMH 277

57PL120 57PL208 57PL240 57PL277

42PL120 42PL208 42PL240 42PL277

85IF120 5 85IF2085 85IF2405 85IF2775 85IF3475























DC – Double Curved ArmEra® Lantern


1A/LEB19DCH3/150PMH277/WH/TF/HSAS16-534188A-HA11S/WH


1 2 3 4 5-9 10 11

KIM LIGHTING 17





10 Optional Poles:

9 Optional Fusing:

MedallionsCat. No.: 19" MDL Heavy cast aluminum medallions 26" MDL on top of luminaire arms. (DC) arms only.FinialCat. No.: 19" TF Heavy cast aluminum finial on 26" TF top of housing. Bottom mount (BM) luminaires only.


Refer to Kim Lighting’s Arms and Poles Selection Guide for pole options.. Contact factory for optical centerline data.




Single Fuse

HS for flat lens


KIM LIGHTING 17

Photocell

Medallions Finials


Note: Refer to Kim Lighting’s Arms and Poles Selection Guide to specify pole and arm mounted finials.

11 Era Arm: See pages 22-23 for Era Arm ordering information

DC – Double Curved ArmEra® Lantern



Convex Glass Lens

LE Era® Lantern Luminaires – 19" Small Housing

LEB Bottom Mount Adapter for mounting to arms

LET Cap for Top Mount

SS Single

Straight Arm

SC Single

Curved Arm

LEAF Leaflets

TFFinial

MDLMedallion

DC Double

Curved Arm

SS Single

Straight Arm

SC Single

Curved Arm

LEAF Leaflets

TFFinial

MDLMedallion

DC Double

Curved Arm

LET Top Mount Adapterfor mounting to arms

19" DIA.(482.6 mm)

25A"(636.6 mm)

12K"(317.5 mm)

17F"(436.6 mm)17F"

(436.6 mm)12K"(317.5 mm)

12K"(317.5 mm)

1K"(63.5 mm)

2O"(72.1 mm)

2K"(63.5 mm)

2B"(54.0 mm)

2K"(63.5 mm)

4"(101.6 mm)

3K"(88.9 mm)

3K"(88.9 mm)

3K"(88.9 mm)

35K"(901.7 mm)

12C"(314.3 mm)

5K"(149.2 mm)

5K"(149.2 mm)

3E"(97.8 mm)

3E"(97.8 mm)

6K"(165.1 mm) 4K"

(114.3 mm) 5L"(146.1 mm)

4"(101.6 mm)

5K"(149.2 mm)

2L"(69.9 mm)

11"(279.4 mm)

3L"(95.3 mm)

L"(19.1 mm)

L"(19.1 mm)

4"(101.6 mm)

4"(101.6 mm)

9"(228.6 mm)

4J"(108.0 mm)

14J"(362.0 mm)

1J"(31.8 mm)

6J"(158.8 mm)

4E"(123.7 mm)

4O"(122.2 mm)

4O"(122.2 mm)

4O"(122.2 mm)

15"(381.0 mm)

26"(660.4 mm)

3J"(82.6 mm)

4"(101.6 mm)

2L"(69.9 mm)

1"(25.4 mm)

4L"(120.7 mm)

1011⁄32"(262.4 mm)

15⁄32"(29.2 mm)

15⁄32"(29.2 mm)




17F"(436.6 mm)

DimensionsLE19 - Small 42 to 200 Watt PMH, HPS, PL, IF Lamps

EPA: Post top 1.0 Maximum weight: 45 lbs.

Housing: One-piece, die-cast, low copper (<0.6% Cu) aluminum alloy components with integral cooling fins. A die-cast adapter is provided to complement the design. Lens Frame: One-piece, die-cast, low copper (<0.6% Cu) aluminum alloy Stainless steel hinges provided for attachment to housing. The F" thick clear flat or convex tempered glass lens seals against the reflector flange with a one-piece silicone gasket. Flat glass is standard for the hori-zontal reflector modules and sag glass is standard for the vertical reflector modules. Optional molded acrylic or Lexan® is available on all versions.Hub: (LET) Die-cast, low copper (<0.6% Cu) aluminum alloy with die-cast access cover. (LEB) Die-cast, low copper (<0.6% Cu) aluminum alloy with die-cast access cover. Hub is used to support the arm components and for overall support of the luminaire and provides field wire access. Mounting to a single pole or a tenon mount for poles by-others. A sand-cast adapter casting is provided when HA arms are specified.

Support Arms: (SS) Single Straight, die-cast, low copper aluminum alloy supports the housing and provides wire access. Optional trims are available to complement the arm styling. (SC) Single Curved, die-cast, low copper aluminum alloy supports the housing and provides wiring when the luminaire is bottom mounted. Optional trims are available to compliment the arm styling. (DC) Double curved, die-cast, low copper alloy aluminum supports the housing and provides wire access. Optional trims are available to complement the arm styling.Ballast Module: All electrical components are UL and CSA recog-nized, mounted on a single bracket and factory pre-wired against the ribbed wall housing for maximum heat sinking.Reflector Module: Six distinct reflector designs are available as four horizontal versions and two vertical versions. High specular Alzak optical segments with 95% reflectivity are mounted together as a module. The entire module hooks in and out of the housing by no-tool release hinges and is sealed against the lens surface to obtain an Index of Protection rating of IP66. See electrical data on pages 26-27 for socket type.

Luminaire Specifications

18 KIM LIGHTING

Era® Lantern

Listings and Ratings UL cUL 15981 CE IP66 25C Ambient



SS Single

Straight Arm

SC Single

Curved Arm

LEAF Leaflets

TFFinial

MDLMedallion

DC Double

Curved Arm

SS Single

Straight Arm

SC Single

Curved Arm

LEAF Leaflets

TFFinial

MDLMedallion

DC Double

Curved Arm


19" DIA.(482.6 mm)

25A"(636.6 mm)

12K"(317.5 mm)

17F"(436.6 mm)17F"

(436.6 mm)12K"(317.5 mm)

12K"(317.5 mm)

1K"(63.5 mm)

2O"(72.1 mm)

2K"(63.5 mm)

2B"(54.0 mm)

2K"(63.5 mm)

4"(101.6 mm)

3K"(88.9 mm)

3K"(88.9 mm)

3K"(88.9 mm)

35K"(901.7 mm)

12C"(314.3 mm)

5K"(149.2 mm)

5K"(149.2 mm)

3E"(97.8 mm)

3E"(97.8 mm)

6K"(165.1 mm) 4K"

(114.3 mm) 5L"(146.1 mm)

4"(101.6 mm)

5K"(149.2 mm)

2L"(69.9 mm)

11"(279.4 mm)

3L"(95.3 mm)

L"(19.1 mm)

L"(19.1 mm)

4"(101.6 mm)

4"(101.6 mm)

9"(228.6 mm)

4J"(108.0 mm)

14J"(362.0 mm)

1J"(31.8 mm)

6J"(158.8 mm)

4E"(123.7 mm)

4O"(122.2 mm)

4O"(122.2 mm)

4O"(122.2 mm)

15"(381.0 mm)

26"(660.4 mm)

3J"(82.6 mm)

4"(101.6 mm)

2L"(69.9 mm)

1"(25.4 mm)

4L"(120.7 mm)

1011⁄32"(262.4 mm)

15⁄32"(29.2 mm)

15⁄32"(29.2 mm)




17F"(436.6 mm)

1Suitable for wet locations.

LE Era® Lantern Luminaires – 26" Large Housing

DimensionsLE26 - Large 200to 400 Watt PMH, HPS Lamps

EPA: Post top 1.0 Maximum weight: 92 lbs.

KIM LIGHTING 19

Electrical Module: All electrical components are UL and CSA recog-nized, mounted on a single bracket and factory pre-wired with quick-discon-nect plugs. A complete HF generator and Induction Lamp system is furnished mounted to the aluminum plate inside housing. Induction Lamp system is high power factor rated for -4°F, starting.Mounting: The fixture is equipped for flush mount (FM), Pole Tenon Mount (PT), or as an arm mount (See Arms and Poles Selection Guide).Finish: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a titanated zirconium conversion coating; A.S.T.M. 2500 hour salt spray test endurance rating. Standard colors are Black, Dark Bronze, Light Gray, Stealth Gray, Platinum Silver, or White. Custom colors are available.CAUTION: Fixtures must be grounded in accordance with national, state and/or local electrical codes. Failure to do so may result in serious personal injury.

Refer to Kim Lighting’s Arms and Poles Selection Guide for complete details on traditional arms and poles to complement your Era Lantern luminaire. Contact your Kim Lighting representative or download it now at www.kimlighting.com.

Era® Lantern

Optional Fusing: High temperature fuse holders factory installed inside the fixture housing. Single fusing (SF) for 120V, 277V and 347V or Double fusing (DF) for 208V, 240V and 480V.

Optional Pipe Tenon Mounts: See page 24 for ordering information.

Optional Wall Mounts: See page 21 for ordering information.

Optional Poles: Refer to Kim Lighting’s Arms and Poles Selection Guide for pole options. Contact factory for optical centerline data.

Optional Houseside Shield: (HS) – For use with all fixtures with flat glass lens. (Not for use with Type V light distributions). The horizontal reflectors are available with stamped aluminum louvers that pass streetside light and block houseside light, and a blackened panel added to the reflector to reduce houseside reflections. (HSC) – For use with all fixtures with sag glass lens. (Not for use with Type V light distributions). The vertical reflectors with the optional sag glass lens are available with a formed aluminum shield that passes streetside light and blocks houseside light, and a blackened panel added to the reflector to reduce houseside reflections.

Optional Arms, and Arm Finials: See pages 24-25 for heritage-style arm ordering information.

Optional Decorative Accents: Medallion (MDL) – Heavy cast aluminum Medallions on top of luminaire arms. (DC) arms only. Leaflet (LEAF) – heavy cast aluminum on top and bottom of luminaire arms. (SS) arms only. Finial (TF) – heavy cast aluminum on top of housing. Bottom Mount (BM) luminaire only.

Optional Flat Glass Lens for Vertical Lamp: Flat glass lens replaces sag glass lens on vertical lamp luminaires. Meets dark sky full cutoff requirement.

Single Fuse

Leaflets FinialsMedallions

20 KIM LIGHTING

Option Specifications

Flat Glass Lens

Photocell

HS for flat lens


Optional Photocell: Factory installed photocell in housing with fully gasketed sensor on side wall.

Era® Lantern

KIM LIGHTING 21

Wall Mounting OptionsHA02LW Large Side Crook Arm

HA02SW Small Side Crook Arm

HA13LW S-Shaped Down Cast Arm

HA13SW S-Shaped Down Cast Arm

HA14LW Neo-Classic Arm

HA14S W Neo-Classic Arm

HA31LW Ribbon Arm with Top Scroll

HA31W Ribbon Arm with Top Scroll

HA11LW Swept Cast Arm

HA11SW Swept Cast Arm

HA12LW S-Shaped Up Cast Arm

HA12SW S-Shaped Up Cast Arm

7K"(190.5 mm)

17E"(454.0 mm)

7K"(190.5 mm)

15K"(190.5 mm)

8D "(219.1 mm)

27" (685.8 mm)

7 "(177.8 mm)

22" (558.8 mm)

8D "(219.1 mm)

27" (685.8 mm)

7 "(177.8 mm)

22" (558.8 mm)

7 "(177.8 mm)

22" (558.8 mm)

8D "(219.1 mm)

27" (685.8 mm)

8D "(219.1 mm)

27" (685.8 mm)

7 "(177.8 mm)

22" (558.8 mm)

8D "(219.1 mm)

27" (685.8 mm)

7 "(177.8 mm)

22" (558.8 mm)

7 "(177.8 mm)

22" (558.8 mm)

8D "(219.1 mm)

27" (685.8 mm)

8D "(219.1 mm)

27" (685.8 mm)

8D "(219.1 mm)

27" (685.8 mm)

7 "(177.8 mm)

22" (558.8 mm)

7 "(177.8 mm)

22" (558.8 mm)

HA32LW Ribbon Arm with Bottom Scroll

HA32SW Ribbon Arm with Bottom Scroll

HA33LW Ribbon Arm with top Gusset

HA33SW Ribbon Arm with top Gusset

HA34LW Ribbon Arm with Bottom Gusset

HA34SW Ribbon Arm with Bottom Gusset

NOTE: Wall mount arm is not included and must be ordered separately.

Era® Lantern

22 KIM LIGHTING

HA14 – Side Pole Neo-Classic Arm (Top mount)

HA31 – Side Pole Ribbon Arm with Top Scroll (Top mount)

HA32 – Side Pole Ribbon Arm with Bottom Scroll (Bottom mount)

HA01 – Post Top Crook Arm (Top mount) Drawing not to scale

25D" (650.9 mm)

30B"(765.2 mm)

4"(101.6 mm)

46K" (1181.1 mm)

20"(508.0 mm)

34K"(876.3 mm)

3C"(85.7 mm)

19E"(504.8 mm)

Large Small

Fixture and Arm EPA 1A 2B 3Y 4CHA01S (Small) 1.3 - - -HA01L (Large) 1.9 - - -

Large Small

Fixture and Arm EPA 1A 2B 3Y 4CHA02S (Small) 1.5 3.0 4.0 4.5HA02L (Large) 2.0 4.0 5.2 6.0

68K" (1739.9 mm)

48"(1219.2 mm)

30B"(765.2 mm)

21L"(552.5 mm)

10"(254.0 mm)

Available for 4", 5", and 6" O.D.pole tops

20"(508.0 mm)

7K"(190.5 mm)

16J"(412.8 mm)

51J"(1301.8 mm)

36K"(927.1 mm)

Available for 3.4", 4", 5", and 6" O.D. pole tops

Small

Fixture & Arm EPA 1A 2B 3Y 4CHA32S (Small) 1.9 3.8 4.8 5.3HA32L (Large) 2.6 5.2 6.2 6.7

Large

2"(50.8 mm)

16C"(415.9 mm)

8O"(224.3 mm)

24L"(628.7 mm)

26K"(673.1 mm)

3K" DIA.(88.9 mm)

1L"(44.5 mm)

12E(327.0 mm)

6E"(174.6 mm)

20"(508.0 mm)

21K"(546.1 mm)

2E" DIA.(73.0 mm)

Small


Large

2"(50.8 mm)

16C"(415.9 mm)

8O"(224.3 mm)

24L"(628.7 mm)

26K"(673.1 mm)

3K" DIA.(88.9 mm)

1L"(44.5 mm)

12E(327.0 mm)

6E"(174.6 mm)

20"(508.0 mm)

21K"(546.1 mm)

2E" DIA.(73.0 mm)

Small


Large

2O"(72.1 mm)

19K"(495.3 mm)

21"(533.4 mm)

7G"(188.9 mm)

21"(533.4 mm)

3K"(88.9 mm)

3B" DIA.(79.4 mm)

2M"(58.4 mm)

15L"(400.1 mm)

17"(431.8 mm)

6"(152.4 mm)

17"(431.8 mm)

2O"(72.1 mm)

2 G" DIA.(61.9 mm)

Small


Large

25C"(644.7 mm)

27"(685.8 mm)

13K"(342.9 mm)

28K"(723.9 mm)

3D"(85.7 mm)

2L"(69.9 mm)

3B" DIA.(79.4 mm)

2F"(55.6 mm)

19H"(500.4 mm)

21"(533.4 mm)

11"(279.4 mm)

22L"(577.9 mm) 2E"

(73.0 mm)

2K" DIA.(63.5 mm)

Small


Large

29F"(741.4 mm)

32I"(836.6 mm)

26H"(677.9 mm)

2D"(66.7 mm)

23H"(601.7 mm)

26H"(677.9 mm)

21H"(550.9 mm)

2B"(54.0 mm)

Small


Large

2O"(72.1 mm)

19K"(495.3 mm)

21"(533.4 mm)

7G"(188.9 mm)

21"(533.4 mm)

3K"(88.9 mm)

3B" DIA.(79.4 mm)

2M"(58.4 mm)

15L"(400.1 mm)

17"(431.8 mm)

6"(152.4 mm)

17"(431.8 mm)

2O"(72.1 mm)

2 G" DIA.(61.9 mm)

Small


Large

28C " (720.7 mm)

9C"(238.1 mm)

30"(762.0 mm)

4"(101.6 mm)

Available for 4" O.D. pole top

Available for 3.4" O.D. pole top

21C "(542.9 mm)

7L"(196.9 mm)

3J"(82.55 mm)

23D"(600.1 mm)

HA11 – Side Pole Swept Cast Arm (Top/Bottom mount)

HA02 – Side Pole Crook Arm (Top mount) Drawing not to scale

HA12 – Side Pole S-Shaped Up Cast Arm (Top/Bottom mount)

HA13 – Side Pole S-Shaped Down Cast Arm (Top/Bottom mount)

HA03 – Post Top Swept Cast Arm (Top mount)

22 KIM LIGHTING

Arm Mounting Options

Era® Lantern

KIM LIGHTING 23

HA33 – Side Pole Ribbon Arm with Top Gusset (Top mount)

HAF2 – Large and Small Arm Finials Drawing not to scale

HA34 – Side Pole Ribbon Arm with Bottom Gusset (Bottom mount)

HA35 – Side Pole Ribbon Arm with Top Brace (Top mount)

HA36 – Side Pole Ribbon Arm with Bottom Brace (Bottom mount)

HA37 – Side Pole Ribbon Arm with Top Brace and Bottom Scroll (Top mount)

HA38 – Side Pole Ribbon Arm with Top Brace and Bottom Gusset (Top mount)

Small

6E"(174.6 mm)

31D"(802.6 mm)

21K"(546.1 mm)

2E" DIA.(73.0 mm)

20"(508.0 mm)

1L"(44.5 mm)


Large

2"(50.8 mm)

8O"(224.3 mm)39C"

(1000.3 mm)

26K"(673.1 mm)

3K" DIA.(88.9 mm)

24L"(628.7 mm)

Small


Large

6E"(174.6 mm)22E"

(581.7 mm)

20"(508.0 mm)

21K"(546.1 mm)

2E" DIA.(73.0 mm)

1L"(44.5 mm)

2"(50.8 mm)

8O"(224.3 mm)28D"

(727.5 mm)

24L"(628.7 mm)

26K"(673.1 mm)

3K" DIA.(88.9 mm)

Small


Large

2"(50.8 mm)

8O"(224.3 mm)

17F"(436.6 mm)

24L"(628.7 mm)

26K"(673.1 mm)

3K" DIA.(88.9 mm)

1L"(44.5 mm)

13K"(342.9 mm)

6E"(174.6 mm)

20"(508.0 mm)

21K"(546.1 mm)

2E" DIA.(73.0 mm)

Small


Large

2"(50.8 mm)

8O"(224.3 mm)

17F"(436.6 mm)

24L"(628.7 mm)

26K"(673.1 mm)

3K" DIA.(88.9 mm)

1L"(44.5 mm)

13K"(342.9 mm)

6K"(174.6 mm)

20"(508.0 mm)

21K"(546.1 mm)

2E" DIA.(73.0 mm)

Small


Large

6E"(174.6 mm)

30I"(785.4 mm)

21K"(546.1 mm)

2E" DIA.(73.0 mm)

20"(508.0 mm)

1L"(44.5 mm)

8O"(224.3 mm)

38K"(977.9 mm)

24L"(628.7 mm)

26K"(673.1 mm)

3K" DIA.(88.9 mm)

2"(50.8 mm)

Small


Large

6E"(174.6 mm)

22E"(581.7 mm)

20"(508.0 mm)

21K"(546.1 mm)

2E" DIA.(73.0 mm)

1L"(44.5 mm)

2"(50.8 mm)

8O"(224.3 mm)

28D"(727.5 mm)

24L"(628.7 mm)

26K"(673.1 mm)

3K" DIA.(88.9 mm)

2G"(61.9 mm)

3M"(84.1 mm)

2N"(65.1 mm)

1E"(47.6 mm)

4N"(115.8 mm)

4B"(104.7 mm)

4K"(114.3 mm)

8J"(209.6 mm) 6I"

(175.8 mm)

3O"(96.8 mm)

3C"(85.7 mm) 3E

(97.8 mm)

SmallLarge

KIM LIGHTING 23Refer to Kim Lighting’s Arms and Poles Selection Guide for complete details.

Era® Lantern

24 KIM LIGHTINGLIGHTING

Pipe Tenon Mounting Options

Post Top Crook - Small1A HA01S-TM1

25.78(654.8 mm)

413⁄32"(1043.7 mm)

1813⁄32"(467.1 mm)

7"(177.8 mm)

3C" (85.9 mm)

Post Top Crook - Large1A HA01L-TM1

32N"(826.8 mm)

535⁄32"(1349.8 mm)

719⁄32"(192.5 mm)

4"(101.6 mm) 283⁄32"

(713.2 mm)

Side Pole Crook - Small1A HA02S-TM12B HA02S-TM23Y HA02S-TM34C HA02S-TM4

3C"(85.9 mm)

6D"(168.4 mm)

19M"(490.0 mm)

30E"(783.3 mm)

23M"(592.1 mm)

4"(101.6 mm)

25H" (652.3 mm)

347⁄32"(869.2 mm)

401⁄32"(1017.8 mm)

Side Pole Crook - Large1A HA02L-TM12B HA02L-TM23Y HA02L-TM34C HA02L-TM4

831⁄32"(227.8 mm)

Post Top Swept - Small1A HA03S-TM12B HA03S-TM23Y HA03S-TM34C HA03S-TM4

913⁄32"(238.5 mm)

179⁄32"(438.4 mm)

23D"(600.4 mm)

Post Top Swept - Large1A HA03L-TM12B HA03L-TM23Y HA03L-TM34C HA03L-TM4

11M" (287.2 mm)

30"(762.3 mm)

235⁄32"(588.0 mm)

Side Pole Swept - Small1A HA11S-TM12B HA11S-TM23Y HA11S-TM34C HA11S-TM4

14"(355.6 mm)

4"(101.6 mm)

21C" (543.1 mm)

19M"(490.5 mm)

Side Pole Swept - Large1A HA11L-TM12B HA11L-TM23Y HA11L-TM34C HA11L-TM4

16"(406.4 mm)

4"(101.6 mm)

25L"(653.8 mm)

24O" (630.4 mm)

Side Pole Crook - Small1A HA12S-TM12B HA12S-TM23Y HA12S-TM34C HA12S-TM4

4"(101.6 mm)

8"(203.2 mm)

15.36(390.1 mm)

15J"(386.6 mm)

Side Pole S-Shaped Up - Large1A HA12L-TM12B HA12L-TM23Y HA12L-TM34C HA12L-TM4

4"(101.6 mm)

10J"(260.4 mm)

19C"(491.8 mm)

18I"(480.8 mm)

Side Pole S-Shaped Down - Small1A HA13S-TM12B HA13S-TM23Y HA13S-TM34C HA13S-TM4

4"(101.6 mm)

8"(203.2 mm) 1511⁄32"

(203.2 mm)

631⁄32"(203.2 mm)

Side Pole S-Shaped Down - Large1A HA13L-TM12B HA13L-TM23Y HA13L-TM34C HA13L-TM4

4"(101.6 mm)

11"(279.4 mm)

1831⁄32"(481.1 mm)

6I"(175.8 mm)

HA01 – Post Top Crook Arm

HA03 – Post Top Swept Arm

HA12 – Side Pole S-Shaped UpArm HA13 – Side Pole S-Shaped Down Arm

HA11 – Side Pole Swept Arm

HA02 – Side Pole Crook Arm

Era® Lantern


Side Pole Neo-Classic - Small1A HA14S-TM12B HA14S-TM23Y HA14S-TM34C HA14S-TM4

17"(431.8 mm)

239⁄32"(591.1 mm)

203⁄32"(510.3 mm)

4"(101.6 mm)

Side Pole Neo-Classic - Large1A HA14L-TM12B HA14L-TM23Y HA14L-TM34C HA14L-TM4

4"(101.6 mm)

25"(635.0 mm)

2731⁄32"(709.7 mm)

28H"(729.0 mm)

Side Pole Ribbon with Top Scroll - Small1A HA31S-TM12B HA31S-TM23Y HA31S-TM34C HA31S-TM4

4"(101.6 mm)

14"(355.6 mm)

1929⁄32"(505.0 mm)

B" (355.6 mm)

Side Pole Ribbon with Top Scroll - Large1A HA31L-TM12B HA31L-TM23Y HA31L-TM34C HA31L-TM4

4"(101.6 mm)

20"(508.0 mm)

2419⁄32"(624.1 mm)

127⁄32"(46.7 mm)

4"(101.6 mm)

Side Pole Ribbon with Bottom Scroll - Small1A HA32S-TM12B HA32S-TM23Y HA32S-TM34C HA32S-TM4

14"(355.6 mm)

19I" (506.0 mm)

14A"(356.6 mm)

Side Pole Ribbon with Bottom Scroll - Large1A HA32L-TM12B HA32L-TM23Y HA32L-TM34C HA32L-TM4

4"(101.6 mm)

18"(457.2 mm)

24K" (622.3 mm)

G"(10.7 mm)

Side Pole Ribbon with Top Gusset - Small1A HA33S-TM12B HA33S-TM23Y HA33S-TM34C HA02S-TM4

4"(101.6 mm)

15K" (393.7 mm)

19I" (505.7 mm)

.12"(304.8 mm)

Side Pole Ribbon with top Gusset - Large1A HA33L-TM12B HA33L-TM23Y HA33L-TM34C HA33L-TM4

4"(101.6 mm)

21"(533.4 mm)

2417⁄32"(623.1 mm)

127⁄32"(46.7 mm)

Side Pole Ribbon with Bottom Gusset - Small1A HA34S-TM12B HA34S-TM23Y HA34S-TM34C HA34S-TM4

4"(101.6 mm)

15"(381.0 mm)

1929⁄32"(505.5 mm)

14L"(374.7 mm)

Side Pole Ribbon with Bottom Gusset - Large1A HA34L-TM12B HA34L-TM23Y HA34L-TM34C HA34L-TM4

4"(101.6 mm)

19"(482.6 mm)

24K"(622.3 mm)

1819⁄32"(471.9 mm)

HA14 – Side Pole Neo-Classic Arm

HA32 – Side Pole Ribbon with Bottom Scroll Arm

HA34 – Side Pole Ribbon with Bottom Gusset Arm

HA33 – Side Pole Ribbon with Top Gusset Arm

HA31 – Side Pole Ribbon with Top Scroll Arm

NOTE: HA35, HA36, HA37, and HA38, consult factory.All small arm assemblies require a steel 2" pipe tenon (2C" O.D.) x 4" long.All large arm assemblies require a steel 2K" pipe tenon (2E" O.D.) x 4" long.

Era® Lantern

26 KIM LIGHTING

70 PMH 90 Coated, ED17, Med Base 5300V 15000 M98 -30C HX-HPF 120 0.85 1.90 0.80 4 Clear, T6, G12 Base 5800 9000 M143 208 0.52 1.00 0.50 3 (Expect Shadows) 240 0.44 0.90 0.43 2 277 0.39 0.80 0.39 2 347 0.28 0.70 0.20 2 480 0.23 0.50 0.26 2 70 PMH 80 Coated, ED17, Med Base 5300V 15000 M98 -30C Electronic 120 - - 0.67 4 Clear, T6, G12 Base 5800 9000 M143 208 - - 0.45 3 (Expect Shadows) M139 240 - - 0.38 2 277 - - 0.30 2 100 PMH 129 Coated, ED17 Med Base 8500V 15,000 M90 -30C HX-HPF 120 1.15 2.30 1.20 6 M140 208 0.66 1.40 0.80 4 240 0.58 1.15 0.65 3 277 0.50 1.00 0.60 3 347 0.40 1.00 0.40 2 480 0.30 0.55 0.30 2 100 PMH 110 Coated, ED17 Med Base 8500V 15,000 M90 -30C Electronic 120 - - 0.92 6 M140 208 - - 0.70 4 240 - - 0.60 3 277 - - 0.40 3 150 PMH 185 Coated, ED17, Med Base 13300V 15000 M102 -30C HX-HPF 120 1.60 3.65 1.75 10 Clear, T6, G12 Base 12700 9000 M142 208 1.00 2.10 1.30 5 (Expect Shadows) 240 0.80 1.80 0.85 5 277 0.70 1.58 0.77 4 347 0.55 1.25 0.65 3 480 0.42 0.81 0.45 3 150 PMH 165 Coated, ED17, Med Base 13300V 15000 M102 -30C Electronic 120 - - 1.40 10 Clear, T6, G12 Base 12700 9000 M142 208 - - 1.00 5 (Expect Shadows) 240 - - 0.80 5 277 - - 0.60 4 175 PMH 208 Coated, ED17, Med Base 16,600 15000 M152 -30C CWA 120 1.90 1.00 1.00 5 (Small Lantern - Vertical Lamp) 208 1.05 0.60 0.60 3 240 0.95 0.50 0.50 3 277 0.80 0.45 0.45 2 347 0.65 0.35 0.35 2 480 0.50 0.25 0.25 2 175 PMH Coated, ED17, Med Base 16600 15000 M152 -30C Electronic 120 - - 1.70 10 (Small Lantern - Vertical Lamp) 208 - - 0.90 5 240 - - 0.80 5 277 - - 0.70 4 200 PMH 240 Coated, ED17, Med Base 20,000 12,000 M136 -30C Super 120 2.00 2.00 0.75 6 (Small Lantern - Vertical Lamp Only) CWA 208 1.20 1.20 0.40 4 Coated, T15, Mogul Base 240 1.00 1.00 0.35 3 (Large Lantern) 277 0.85 0.85 0.30 3 347 0.70 0.65 0.25 2 480 0.50 0.50 0.18 2 200 PMH 229 Coated, ED17, Med Base 19000 15000 M136 -30C Electronic 120 - - 2.00 6 (Small Lantern - Vertical Lamp Only) 208 - - 1.20 4 Coated, T15, Mogul Base 240 - - 1.00 3 (Large Lantern) 277 - - 1.00 3 250 PMH 295 Coated, ED28, Mogul Base 23800V 15,000 M138 -30C CWA 120 2.50 1.40 2.30 8 22600H M153 208 1.45 0.80 1.30 5 240 1.25 0.70 1.15 5 277 1.10 0.60 1.00 3 347 0.95 0.75 0.45 3 480 0.57 0.48 0.21 2 250 PMH 295 Coated, ED28, Mogul Base 23800V 15000 M138 -30C Electronic 208 - - 1.36 5 22600H M153 240 - - 1.19 3 277 - - 1.06 3 320 PMH 368 Coated, ED28, Mogul Base 31000V 20,000 M132 M154 -30C Super 120 3.25 2.30 1.80 8 27000H M170 CWA 208 1.90 1.35 1.05 6 240 1.65 1.15 0.90 5 277 1.40 1.00 0.80 3 347 1.10 0.80 0.70 3 480 0.80 0.60 0.45 5 320 PMH 368 Coated, ED28, Mogul Base 31000V 20000 M132 -30C Electronic 208 - - 1.70 8 27000H M154 240 - - 1.49 6 M170 277 - - 1.32 5 350 PMH 400 Coated, ED28, Mogul Base 35000V 20,000 M131 -30C Super 120 3.40 2.20 2.20 10 31000H M171 CWA 208 2.00 1.30 1.30 7 240 1.70 1.10 1.10 5 277 1.50 1.00 1.00 5 347 1.20 0.80 0.85 3 480 0.85 0.60 0.60 3 350 PMH Coated, ED28, Mogul Base 35000V 20000 M131 -30C Electronic 208 - - 1.84 10 31000H M171 240 - - 1.59 7 277 - - 1.41 5 400 PMH 452 Coated, ED28, Mogul Base 42000V 20,000 M135 -30C Super 120 4.00 3.00 3.50 10 40000H 20,000 M155 CWA 208 2.30 1.75 2.00 7 M172 240 2.00 1.50 1.75 5

Life

(Hou

rs)

AN

SI

Cod

e

Star

ting

Tem

p

Cir

cuit

Typ

e

Vol

tage

Lam

pW

atts

Lam

p T

ype

Syst

em

Wat

t

Bul

b T

ype

Init

ial

Lum

ens

Ope

rati

ngA

mps

.

Ope

n C

ircu

it

Am

ps.

Star

ting

Am

ps.

Min

. Fu

se

Am

ps.

PULSE START METAL HALIDE

Lamp and Electrical Guide

Era® Lantern

LIGHTING

400 PMH 452 Coated, ED28, Mogul Base 42000V 20,000 M135 -30C Super 277 1.75 1.30 1.50 5 40000H 20,000 M155 CWA 347 1.35 0.75 1.10 4 M172 480 1.00 0.60 0.75 3 400 PMH Coated, ED28, Mogul Base 42000V 20,000 M135 -30C Electronic 208 - - 2.10 10 240 - - 1.81 7 277 - - 1.59 5

70 HPS 91 Coated, ED17 Med Base 5800 24,000 S62 -40C HX-HPF 120 0.81 1.45 0.75 6 208 0.47 0.85 0.45 4 240 0.4 0.75 0.37 3 277 0.35 0.65 0.35 3 347 0.3 0.55 0.3 2 480 0.21 0.36 0.21 2 100 HPS 130 Coated, ED17 Med Base 8800 24000 S54 -40C HX-HPF 120 1.15 2.20 1.30 7 208 0.67 1.25 0.75 5 240 0.58 1.10 0.65 3 277 0.50 0.85 0.60 3 347 0.39 0.70 0.45 3 480 0.22 0.34 0.21 3 150 HPS 188 Coated, ED17 Med Base 15800 24000 S55 -40C HX-HPF 120 1.65 2.80 2.00 10 208 0.95 1.60 1.15 5 240 0.83 1.40 1.00 5 277 0.72 1.25 0.85 4 347 0.56 0.92 0.52 3 480 0.42 0.70 0.50 2 250 HPS 295 Coated, E18, Mogul Base 26,000 24,000 S50 -40C CWA 120 2.50 1.70 1.65 7 208 1.50 1.00 0.95 4 240 1.30 0.85 0.80 4 277 1.10 0.75 0.70 3 347 0.93 0.70 0.60 2 480 0.63 0.45 0.40 2 400 HPS 464 Coated, ED18, Mogul Base 47500 24,000 S51 -40C CWA 120 3.80 2.00 3.3 10 208 2.20 1.20 1.80 6 240 1.90 0.95 1.50 5 277 1.70 0.85 1.40 5 347 1.32 0.70 1.00 5 480 0.97 0.55 0.75 3

42 PL 46 Coated, GX24q-4 Base 3200 12,000 N/A -18C Electronic 120 - - 0.39 2 208 - - 0.23 2 240 - - 0.20 2 277 - - 0.17 2 57 PL 59 Coated, GX24q-5 Base 4300 12,000 N/A -10C Electronic 120 - - 0.80 2 208 - - 0.40 2 240 - - 0.27 2 277 - - 0.21 2

85 IF 89 Generator 6000 100,000 N/A -40F Electronic 120 - - 0.77 2 208 - - 0.44 2 240 - - 0.39 2 277 - - 0.33 2

Life

(Hou

rs)

AN

SI

Cod

e

Star

ting

Tem

p

Cir

cuit

Typ

e

Vol

tage

Lam

pW

atts

Lam

p T

ype

Syst

em

Wat

t

Bul

b T

ype

Init

ial

Lum

ens

Ope

rati

ngA

mps

.

Ope

n C

ircu

it

Am

ps.

Star

ting

Am

ps.

Min

. Fu

se

Am

ps.

All Initial Lumen values shown are approximate and may vary from one manufacturer to another. Consult lamp manufacturer’s data for exact lumen and life data. WARNING: All fixtures must be grounded in accordance with local codes or the National Electrical Code. Failure to do so may result in serious personal injury. Lamps by others.

HIGH PRESSURE SODIUM

COMPACT FLUORESCENT

INDUCTION FLUORESCENT

PULSE START METAL HALIDE (continued)

Era® Lantern

28 KIM LIGHTING28 KIM LIGHTING

Era® Lantern

Kim Lighting is working closely with numerous organizations to develop industry standards ensuring the efficiency, dependability and quality of products that are sold to our customers.

Kim Lighting is doing its part to limit hazardous waste and utilize resources to their fullest. MicroEmitter luminaire housings and LED components meet strict US and international envi-ronmental protection laws, and are constructed from more than 90% pre and post recycled materials and are entirely lead and mercury free.

RoHS – Identifies product components with restricted use of hazardous substances.

Recyclable – Identifies products that use pre and post recycled materials.

Preserving Resources

ROHS/WEEE COMPLIANT PRE AND POST RECYCLED MATERIAL

QR CODE TECHNOLOGY

The Future Is Today


Era® Lantern

BUILDING INFORMATION MODELINGBUILDING INFORMATION MODELING

BIM – Simulate, discover and innovate with Kim Lighting’s Building Information Modeling data tools.

QR Codes – Direct access to specification and installation sheets, performance data and video information segments.

Kim Lighting offers the most advanced design tools that allow the design community to select products that meet all aspects of a project’s criteria.

Kim Lighting’s 3D BIM and SketchUp models allow designers to seamlessly integrate lighting and energy consumption into their project, saving both time and money as they eliminate the guesswork on how the lighting performs and integrates in the built environment. Kim Lighting’s QR codes allow you to download the most up to date product spec sheets, LED performance summaries and HID to LED conversion video segments straight to your smart mobile device.

Design Tools

QR

CO

DE

Scan code to go to www.kimlighting.com

BUILDING INFORMATION MODELINGQR CODE TECHNOLOGY

Because of a continuing product improvement program, Kim Lighting reserves the right to change specifications without notice.

How may we serve you better? Let us know by visiting our web site at: www.kimlighting.com

www.kimlighting.com

Era® LanternPerformance with Heritage Styling

Documents

SITE/ROADWAY LE Era Lantern · 2017-07-26 · KIM LIGHTING 1 Era® Lantern Introducing the Era ® Lantern Series Kim Lighting’s Era Lantern Series is an extensive family of customizable