Sjzl20062307-ZXG10-BSS (V2[1].97) Command Manual - Volume II

8/13/2019 Sjzl20062307-ZXG10-BSS (V2[1].97) Command Manual - Volume II

1/177

ZXG10-BSSBase Station Subsystem

Command Manual - Volume II

Version 2.97

ZTE CORPORATIONZTE Plaza, Keji Road South,

Hi-Tech Industrial Park,Nanshan District, Shenzhen,P. R. China518057Tel: (86) 755 26771900 800-9830-9830Fax: (86) 755 26772236

URL: http://support.zte.com.cnE-mail: [email protected]


2/177

LEGAL INFORMATION

Copyright 2006 ZTE CORPORATION.

The contents of this document are protected by copyright laws and international treaties. Any reproduction ordistribution of this document or any portion of this document, in any form by any means, without the prior writtenconsent of ZTE CORPORATION is prohibited. Additionally, the contents of this document are protected by

contractual confidentiality obligations.

All company, brand and product names are trade or service marks, or registered trade or service marks, of ZTECORPORATION or of their respective owners.

This document is provided as is, and all express, implied, or statutory warranties, representations or conditions

are disclaimed, including without limitation any implied warranty of merchantability, fitness for a particular purpose,title or non-infringement. ZTE CORPORATION and its licensors shall not be liable for damages resulting from theuse of or reliance on the information contained herein.

ZTE CORPORATION or its licensors may have current or pending intellectual property rights or applications

covering the subject matter of this document. Except as expressly provided in any written license between ZTECORPORATION and its licensee, the user of this document shall not acquire any license to the subject matter

herein.

The contents of this document and all policies of ZTE CORPORATION, including without limitation policies related tosupport or training are subject to change without notice.

Revision History

Date Revision No. Serial No. Purpose

12/05/2006 R1.0 sjzl20062307 First edition

01/31/2007 R1.1 sjzl20062307 Reviewed and updated

10/09/2007 R1.2 sjzl20062307 Reviewed and updated


3/177

ZTE CORPORATIONValues Your Comments & Suggestions!

Your opinion is of great value and will help us improve the quality of our productdocumentation and offer better services to our customers.

Please fax to: (86) 755-26772236; or mail to Documentation R&D Department,ZTE CORPORATION, ZTE Plaza, A Wing, Keji Road South, Hi-Tech Industrial Park,

Shenzhen, P. R. China 518057.

Thank you for your cooperation!

DocumentName

ZXG10-BSS (V2.97) Base Station Subsystem Command Manual - Volume II

Product Version V2.97Document RevisionNumber

R1.2

Equipment Installation Date

Presentation:

(Introductions, Procedures, Illustrations, Completeness, Level of Detail, Organization,Appearance)

Good Fair Average Poor Bad N/A

Accessibility:

(Contents, Index, Headings, Numbering, Glossary)


Your evaluationof thisdocumentation

Intelligibility:

(Language, Vocabulary, Readability & Clarity, Technical Accuracy, Content)


Yoursuggestions forimprovement ofthisdocumentation

Please check the suggestions which you feel can improve this documentation:

Improve the overview/introduction Make it more concise/brief

Improve the Contents Add more step-by-step procedures/tutorials

Improve the organization Add more troubleshooting information

Include more figures Make it less technical

Add more examples Add more/better quick reference aids

Add more detail Improve the index

Other suggestions

__________________________________________________________________________

__________________________________________________________________________

__________________________________________________________________________

__________________________________________________________________________

__________________________________________________________________________

# Please feel free to write any comments on an attached sheet.

If you wish to be contacted regarding your comments, please complete the following:

Name Company

Postcode Address

Telephone E-mail


4/177

This page is intentionally blank.


5/177

Contents

About this Manual............................................................. i

Purpose................................................................................ i

Intended Audience ................................................................. i

Prerequisite Skill and Knowledge.............................................. i

What is in this Manual ............................................................ i

Related Documentation.......................................................... ii

Conventions........................................................................ iii

How to Get in Touch............................................................. iv

Chapter 1..........................................................................1

Security Management Commands...................................1

User Management Commands................................................. 1

Operation Log Commands .................................................... 16

Chapter 2........................................................................21

Performance Management Commands.........................21

Measurement Job Commands ............................................... 21

Observation Job Commands ................................................. 27

Automated Report Commands .............................................. 31

Other Commands................................................................ 35

Chapter 3........................................................................45

Fault Management Commands......................................45

Alarm Management Commands............................................. 45

Alarm Rule Management Commands...................................... 68

Test Management Commands............................................. 124

Chapter 4......................................................................137

System Tools Commands.............................................137

Data Base Configuration and Monitoring Commands............... 137

Database Query and Index Commands................................. 142


6/177

Chapter 5......................................................................145

Cell Broadcasting Commands......................................145

Resource Management Commands....................................... 145

Short Message Commands.................................................. 151

Appendix A...................................................................157

Error Code Index..........................................................157

Appendix B ...................................................................159

Abbreviations ...............................................................159

Appendix C ...................................................................163

Tables...........................................................................163

Index............................................................................165


7/177


8/177


ii Confidential and Proprietary Information of ZTE CORPORATION

Section Summary

Chapter 3, FaultManagementCommands

Explains fault management commands ofOMCR (V2) system. It includes alarmmanagement, alarm rule management and

test management commands.

Chapter 4, SystemTools Commands

Explains system tools commands of OMCR(V2) system. It includes database

configuration and monitoring commands.

Chapter 5, Cell

BroadcastingCommands

Explains cell broadcasting short messages

commands. It includes resourcemanagement commands and shortmessages commands.

Appendix A, Error CodeIndex

Gives a list of error codes and theirdescription.

Appendix B,

Abbreviations

Lists all the abbreviations used in this

manual.

Appendix C, Tables Lists all the tables used in this manual.

Index Index of terms and definitions appeared inthis manual.

Related Documentation

The following documents are related to this manual:

ZXG10-BSC (V2.97) Base Station Controller Documentation

Guide

ZXG10-BSC (V2.97) Base Station Controller Technical Manual(Fundamentals)

ZXG10-BSC (V2.97) Base Station Controller Technical Manual(Equipment)

ZXG10-BSC (V2.97) Base Station Controller HardwareManual

ZXG10-BSC (V2.97) Base Station Controller HardwareInstallation Manual

ZXG10-BSC (V2.97) Base Station Controller DebuggingManual

ZXG10-BSC (V2.97) Base Station Controller MaintenanceManual (Routine Maintenance)

ZXG10-BSC (V2.97) Base Station Controller MaintenanceManual (Troubleshooting)

ZXG10-BSC (V2.97) Base Station Controller Maintenance

Manual (Emergency Maintenance)

ZXG10-BSS (V2.97) Base Station Subsystem NetworkManagement Technical Manual


9/177

About this Manual

Confidential and Proprietary Information of ZTE CORPORATION iii

ZXG10-BSS (V2.97) Base Station Subsystem CommandManual - Volume I

ZXG10-BSS (V2.97) Base Station Subsystem Operation

Manual

ZXG10-BSS (V2.97) Base Station Subsystem OperationManual (Configuration Management)

ZXG10-BSS (V2.97) Base Station Subsystem OperationManual (Radio Parameters)

ZXG10-BSS (V2.97) Base Station Subsystem Software

Installation Manual

ZXG10-BSS (V2.97) Base Station Subsystem OperationManual (Performance Counters) - Volume I

ZXG10-BSS (V2.97) Base Station Subsystem OperationManual (Performance Counters) - Volume II

Conventions

ZTE documents employ the following typographical conventions.

TA B L E 2 TY P O G R A P H I C A L C O NVENT I O NS

Typeface Meaning

Italics References to other Manuals and documents.

Quotes Links on screens.

Bold Menus, menu options, function names, inputfields, radio button names, check boxes, drop-down lists, dialog box names, window names.

CAPS Keys on the keyboard and buttons on screensand company name.

Const ant wi dth Text that you type, program code, files anddirectory names, and function names.

[ ] Optional parameters.

{ } Mandatory parameters.

| Select one of the parameters that are delimitedby it.

Note: Provides additional information about acertain topic.

Checkpoint: Indicates that a particular step needsto be checked before proceeding further.

Tip: Indicates a suggestion or hint to make thingseasier or more productive for the reader.

TypographicalConventions


10/177


iv Confidential and Proprietary Information of ZTE CORPORATION

TA B L E 3 M O USE OP E R A T I O N CO NVENT I O NS

Typeface Meaning

Click Refers to clicking the primary mouse button (usuallythe left mouse button) once.

Double-click Refers to quickly clicking the primary mouse button(usually the left mouse button) twice.

Right-click Refers to clicking the secondary mouse button(usually the right mouse button) once.

Drag Refers to pressing and holding a mouse button andmoving the mouse.

How to Get in Touch

The following sections provide information on how to obtainsupport for the documentation and the software.

If you have problems, questions, comments, or suggestionsregarding your product, contact us by e-mail [email protected]. You can also call our customer supportcenter at (86) 755 26771900 and (86) 800-9830-9830.

ZTE welcomes your comments and suggestions on the qualityand usefulness of this document. For further questions,

comments, or suggestions on the documentation, you can

contact us by e-mail at [email protected]; or you can fax yourcomments and suggestions to (86) 755 26772236. You can alsobrowse our website at http://support.zte.com.cn, which containsvarious interesting subjects like documentation, knowledge base,forum and service request.

MouseOperation

Conventions

CustomerSupport

DocumentationSupport


11/177

Confidential and Proprietary Information of ZTE CORPORATION 1

C h a p t e r

1

Security ManagementCommands

This topic explains man-machine commands for securitymanagement in the OMCR (V2) system. It comprises of the

following sections:

User management

Operation log commands

User Management Commands

To get intended operation performed, as a result of commandinput in Command window of OMCR interface or Commandinputpane of User Management.

Prior to performing this task, ensure following:

1. Command Windowon OMCR interface or Command inputpane ofUser Management is open.

2. OMCR or required domain is running in Non Debug mode.

Table 4 describes OMCR command classification.

TA B L E 4 CO M M AND C L A S S I F I C A T I O N S IN OMCR

Level Code Command Group

A MML Commands for Alarm Management

B MML Commands for Cell Broadcast Short Messages

C MML Commands for Other Configurations

D MML Commands for Database Management

F MML Commands for Alarm Rule Management

Function

Prerequisites


12/177


2 Confidential and Proprietary Information of ZTE CORPORATION

Level Code Command Group

L MML Commands for Operation Log

N MML Commands for CCS7

P MML Commands for Performance Management

S MML Commands for User Management

T MML Commands for Test Management

Table 5 describes user management commands.

TA B L E 5 U SER MA N A G EM E NT CO M M ANDS

CommandName

Command Function

SCLQ Query all cascaded users.

SCUA Bind user to a cascaded user of another domain.

SCUC Create a cascaded user.

SCUD Delete a cascaded user.

SCUQ Query cascaded user rights.

SGDA Add an operation object to a user group.

SGDD Delete direct rights of a user group.

SGDQ Query user group direct rights.

SGPQ Query user group rights.SGRA Modify role of a user group.

SGRC Create a user group.

SGRD Delete a user group.

SGRM Modify user group attribute.

SGRQ Query user group attribute.

SLUC Create a user.

SOBQ Query all operation objects.

SOPQ Query all operation lists.

SRDA Add operation object to a role.

SRDD Delete direct right of a role.

SRDQ Query all direct rights of a role.

SRGQ Query role of a user group.

SLUC Create a role.

SOBQ Delete a role.

SOPQ Modify the note attribute of a role.

SRDA Query a role attribute.

SRDD Query all rights of a role.


13/177

Chapter 1 - Security Management Commands


CommandName

Command Function

SRDQ Modify the role of a role.

SRGQ Query all roles granted to a role.SRLC Add a user to a user group for a time period.

SRLD Delete a user from a user group.

SRLM Query the group of a user.

SRLQ Query user login information.

SRPQ Query user rights.

SUSD Delete a user.

SUSM Modify user attribute.

SUSQ Query user attributes.

SUUL Unlock the locked user.

SCLQ

Query all cascaded users.

SCLQ;

None

SCUA

Bind user to a cascaded user of another domain.

SCUA: Name, Domai nI D, CUser I D, CUName;

Parameter

NameDescription Type and Value range

Name User name Identifier type, lengthrange: 3 ~ 20.

Domai nI D Domain ID Unsigned integer type, valuerange: 1 ~ 255.

CUser I D Cascaded user ID Unsigned integer type, valuerange: 1 ~ 255.

CUName Cascaded user name Identifier type, lengthrange: 3 ~ 20.

Function

Syntax

Parameters

Function

Syntax

Parameters


14/177



SCUC

Create a cascaded user.

SCUC: Name, Not e;

ParameterName

Description Type and Value range

Name Cascaded User name Identifier type, lengthrange: 3 ~ 20.

Not e Brief description ofthe cascaded user

String type, length range: 0~ 99.

SCUD

Delete a cascaded user.

SCUD: Name, Domai nI D [ , CUser I D] [ , CUName] ;

ParameterName



Domai nI D Domain ID Unsigned integer type, valuerange: 1 ~ 255.

CUser I D Cascaded user ID Unsigned integer type, valuerange: 1 ~ 255.

CUName Cascaded user name Identifier type, lengthrange: 3 ~ 20.

SCUQ

Query cascaded user rights.

SCUQ: Name;

ParameterName



Function

Syntax

Parameters

Function

Syntax

Parameters

Function

Syntax

Parameters


15/177



SGDA

Add an operation object to a user group.

SGDA: Name, OPCode, AddObj ;

ParameterName



OPCode Operation Code String type, length range: 4~ 30000.

AddObjOperation object Character string type,

length range: 0 ~ 30000.

SGDD

Delete direct rights of a user group.

SGDD: Name;

ParameterName


Name Group name Identifier type, lengthrange: 3 ~ 20.

SGDQ

Query user group direct rights.

SGDQ: Name;

ParameterName



Function

Syntax

Parameters

Function

Syntax

Parameters

Function

Syntax

Parameters


16/177



SGPQ

Query user group rights.

SGPQ: Name;

ParameterName



SGRA

Modify role of a user group.

SGRA: Name, AddRol e, RmRol e;

ParameterName



AddRol e Role to add Identifier type, lengthrange: 3 ~ 20, defaultvalue: NULL

RmRol e Role to delete Identifier type, lengthrange: 3 ~ 20, default

value: NULL.

SGRC

Create a user group.

SGRC: Name, Not e, Wi nRi ght ;

ParameterName



Not e Brief description ofthe user group

Character string type,length range: 0 ~ 99.

Wi nRi ght Client window running Unsigned integer type, value

Function

Syntax

Parameters

Function

Syntax

Parameters

Function

Syntax

Parameters


17/177



ParameterName


right range: 1 ~ 256,

Each bit represents awindow running right

SGRD

Delete a user group.

SGRD: Name;

ParameterName


Name Group name Composite identifier type,length range: 3 ~ 20.

SGRM

Modify user group attribute.

SGRM: Name, Not e, Wi nRi ght ;

ParameterName





Wi nRi ght Client window runningright

Unsigned integer type, valuerange: 1 ~ 256,


SGRQ

Query user group attribute.

SGRQ: Name;

Function

Syntax

Parameters

Function

Syntax

Parameters

Function

Syntax


18/177



ParameterName


Name Group name Identifier type, lengthrange: 3 ~ 20, default

value: All.



Wi nRi ght Client window runningright



SLUC

Create a user.

SLUC: Name, Passwd1, Passwd2, Note, I sAdmi n, Begi nTi me,EndTi me, PwdLi mi t Type, PwdLi mi t Days, PwdNot i f yDays;

ParameterName



Passwd1 User password Character string type,length range: 16 ~ 40.

Passwd2 Confirm userpassword


Not e Brief description ofthe user

Character string type,


I sAdmi n Whether localoscillator

Boolean type, default value:F.

Begi nTi me Beginning time oflogin time segment(second order)

Time type (hh-mi-ss),default value: 00-00-00.

EndTi me Ending time of logintime segment (secondorder).


PwdLi mi t Type

Password time limittype


1: Modify password iftime limit expires

2: Lock password if timelimit expires

3: Password neverexpires

Parameters

Function

Syntax

Parameters


19/177



ParameterName


PwdLi mi t Days

Number of days forpassword time limit

Unsigned integer type, valuerange: 0 ~ 365.

PwdNot i f yDays

Number of days fornotifying passwordtime limit


SOBQ

Query all operation objects.

SOBQ: TLevel ;

ParameterName


TLevel Operation object treelevel


SOPQ

Query all operation lists.

SOPQ;

None

SRDA

Add operation object to a role.

SRDA: Name, OPCode, AddObj ;

ParameterName


Name Role name Identifier type, lengthrange: 3 ~ 20.

OPCode Operation code Character string type,length range: 4 ~ 30000.

AddObj Operation object Character string type,


Function

Syntax

Parameters

Function

Syntax

Parameters

Function

Syntax

Parameters


20/177



SRDD

Delete direct right of a role.

SRDD: Name;

ParameterName



SRDQ

Query all direct rights of a role.

SRDQ: Name;

ParameterName



SRGQ

Query role of a user group.

SRGQ: Name;

ParameterName


Name User group name Identifier type, lengthrange: 3 ~ 20.

SRLC

Create a role.

SRLC: Name, Not e;

Function

Syntax

Parameters

Function

Syntax

Parameters

Function

Syntax

Parameters

Function

Syntax


21/177



ParameterName



Not e Brief description ofthe role


SRLD

Delete a role.

SRLD: Name;

ParameterName



SRLM

Modify the note attribute of a role.

SRLM: Name, Not e;

ParameterName



Not e Brief description ofthe role


SRLQ

Query a role attribute.

SRLQ: Name;

Parameters

Function

Syntax

Parameters

Function

Syntax

Parameters

Function

Syntax


22/177


23/177



ParameterName



SUGA

Add a user to a user group for a time period.

SUGA: Name, Gr pName, BTi me, ETi me;

Parameter

Name



Gr pName User group name Identifier type, lengthrange: 3 ~ 20.

BTi me Beginning time(second order)


ETi me Ending time (secondorder)


SUGD

Delete a user from a user group.

SUGD: Name, Gr pName;

ParameterName



Gr pName User group name Identifier type, lengthrange: 3 ~ 20.

SUGQ

Query the group of a user.

SUGQ: Name;

Parameters

Function

Syntax

Parameters

Function

Syntax

Parameters

Function

Syntax


24/177



ParameterName



SULQ

Query user login information.

SULQ: Name, OnDat e. OnTi me, EndDat e, EndTi me;

Parameter

Name



OnDat e Beginning date oflogin information

Date type yyyy-mm-dd.

OnTi me Beginning time oflogin information

(second order)

Time type hh-mi-ss.

EndDat e Ending date of logininformation

Date type yyyy-mm-dd.

EndTi me Ending time of logininformation (secondorder)

Time type hh-mi-ss.

SUPQ

Query user rights.

SUPQ: Name;

ParameterName



Parameters

Function

Syntax

Parameters

Function

Syntax

Parameters


25/177



SUSD

Delete a user.

SUSD: Name;

ParameterName



SUSM

Modify user attribute.

SUSM: Name [ , Passwd1] [ , Passwd2] , Note, Begi nTi me,EndTi me, PwdLi mi t Type, PwdLi mi t Days, PwdNot i f yDays;

ParameterName


Name User name Identifier type, no defaultvalue.

Passwd1 User password Character string type,length range: 16 ~ 40.

Passwd2 Confirm userpassword


Not e Brief description ofthe user


Begi nTi me Beginning time oflogin time segment(second order).


ENDTI ME Ending time of login

time segment (secondorder).

Time type (hh-mi-ss),

default value: 00-00-00.

PwdLi mi t Type

Password time limittype


1: Modify password iftime limit expires

2: Lock password if time

limit expires

3: Password neverexpires

PwdLi mi t DaNumber of days for Unsigned integer type, value

Function

Syntax

Parameters

Function

Syntax

Parameters


26/177



ParameterName


ys password time limit range: 0 ~ 365.

PwdNot i f yDays

Number of days fornotifying passwordtime limit.


SUSQ

Query user attributes.

SUSQ: Name;

ParameterName


Name User name Identifier type, lengthrange: 3 ~ 20, defaultvalue: ALL.

SUUL

Unlock the locked use.

SUUL: Name;

ParameterName



Operation Log Commands

To get intended operation performed, as a result of commandinput in Command window of OMCR interface or Commandinputpane of Operation Log.


1. Command Windowon OMCR interface or Command inputpane ofOperation Log is open.

2. OMCR or required domain is running in Non Debug mode

Function

Syntax

Parameters

Function

Syntax

Parameters

Function

Prerequisites


27/177



Table 6 describes operation log commands.

TA B L E 6 OP E R A T I O N L O G C O M M ANDS

CommandName Command Function

LADE Delete the operation logs of the last n days.

LADQ Query log deletion function configuration.

LADS Set log deletion function configuration.

LCTQQuery total number of operation logs that matchthe condition.

LOGD Delete operation logs.

LRDQ Query operation logs that match the condition.

LADE

Delete the operation logs of the last n days.

LADE: Days;

ParameterName


Days Number of days todelete log Unsigned integer type, valuerange: 1 ~ 365.

LADQ

Query log deletion function configuration.

LADQ;

None

LADS

Set log deletion function configuration.

LADS: Enabl e, Days;

Function

Syntax

Parameters

Function

Syntax

Parameters

Function

Syntax


28/177



ParameterName


Enabl e Flag to enable ordisable log deletion

Boolean type.

Days Number of days todelete log

Integer type, value range: 1~ 365.

LCTQ

Query total number of operation logs that match the condition.

LCTQ: User Name, Ter mI D, OpCl ass, Status, OnDate,OnTi me, EndDat e, EndTi me, CmdType, Sr cDmn, Tgt Dmn;

ParameterName


User Name User name Character string type,maximum length: 20,default value: ALL.

TermI D Terminal identifier Unsigned integer type, valuerange: 0 ~ 255, defaultvalue: 0,

0: All terminals

OpCl ass Operating class Character string type,maximum length: 20,default value: ALL.

St at us Operation status Enumerated type, values:FAIL, SUCCEED, UNEND,ALL, default value: ALL.

OnDat e Beginning date Date type, default value:1990-01-01.

OnTi me Beginning time(second order)

Time type, default value:00-00-00.

EndDat e Ending date Date type, default value:2038-01-01.

EndTi me Ending time (secondorder)


CmdType Log type relevant tothe domain, describedin advanced options

Unsigned integer type, valuerange: 0 ~ 4, default value:0.

Sr cDmn Log source domain Unsigned integer type, valuerange: 0 ~ 255, defaultvalue: 0.

TgtDmn Log destinationdomain

Unsigned integer type, valuerange: 0 ~ 255, defaultvalue: 0.

Parameters

Function

Syntax

Parameters


29/177



LOGD

Delete operation logs.

LOGD: Begi nDate, EndDat e;

ParameterName


Begi nDat e Beginning date Date type.

EndDat e Ending date Date type.

LRDQ

Query operation logs that match the condition.

LRDQ: User Name, Ter mI D, OpCl ass, Status, OnDate,OnTi me, EndDat e, EndTi me, OnCount , EndCount , CmdType,Sr cDmn, Tgt Dmn;

Parameter

Name


User Name User name Character string type,maximum length: 20,

default value: ALL.

TermI D Terminal identifier Unsigned integer type, valuerange: 0 ~ 255, defaultvalue: 0,

0: All terminals

OpCl ass Operating class Character string type,maximum length: 20,default value: ALL.

St at us Operation status Enumerated type, values:FAIL, SUCCEED, UNEND,

ALL, default value: ALL.

OnDat e Beginning date Date type, default value:1990-01-01.

OnTi me Beginning time(second order)


EndDat e Ending date Date type, default value:2038-01-01.

EndTi me Ending time (secondorder)


Function

Syntax

Parameters

Function

Syntax

Parameters


30/177



ParameterName


OnCount Position to acquirestart log in the result

set log.

Unsigned integer type, valuerange:1~999999999,

default value: 1.

EndCount Position to acquireend log in the result

set log.

Unsigned integer type,default value: 0.

CmdType Log type relevant tothe domain(advanced options)

Unsigned integer type, value

range: 0 ~ 4, default value:0.

Sr qcDmn Log source domain Unsigned integer type, valuerange: 0 ~ 255, defaultvalue: 0.

TgtDmn Log destination

domain


range: 0 ~ 255, defaultvalue: 0.


31/177


C h a p t e r

2

Performance ManagementCommands

This chapter provides detailed information about man-machinecommands for performance management in the OMCR (V2)system. It consists of the following sections:

Measurement job commands

Observation job commands

Alarm threshold commands

Automated report commands

Other commands

Measurement Job Commands

To get intended operation performed, as a result of command

input in Command window of OMCR interface or Commandinputpane of Perform Management.


1. Command Windowon OMCR interface or Command input

pane of Performance Management.2. OMCR or required domain is running in NON DEBUG mode.

Table 7 describes measurement job commands.

TA B L E 7 MEASUREM ENT J O B C O M M ANDS

CommandName

Command Function

PMCQQuery the current value of a counter of an objectof measurement job.

Function

Perquisites


32/177



CommandName

Command Function

PMIQQuery parameter information of a measurement

job under a BSS.

PMJC Create a measurement job.

PMJD Delete multiple measurement jobs under a BSS.

PMJM Modify a measurement job.

PMJQQuery names of all current measurement jobsunder a BSS.

PMJR Restore multiple measurement jobs under a BSS.

PMJS Suspend multiple measurement jobs under a BSS.

PMCQ

Query the current value of a counter of an object ofmeasurement job.

PMCQ: Bss I D, Name: Obj ect , CountNo;

ParameterName


BssI D BSS identificationnumber


range: 1 ~ 255.

Name Name of themeasurement job toquery


Obj ect Object of the counter Unsigned integer type, valuerange: 0 ~ 1024, meaningof the parameters aredetermined according to thetype of the measuredobject;

Measured object: SITE,module or SS7 link,value format: X (Xrepresents SITE,module, or SS7 linknumber)

Measured object: CELL,value format: X-X (Xrepresents SITE andCELL number in turn)

Measured object: TRX,value format: X-X-X(X represents SITE,CELL, and TRX number

Function

Syntax

Parameters


33/177

Chapter 2 - Performance Management Commands


ParameterName


in turn)

Measured object is BSC,value: BSC

Count No Counter number Unsigned integer type, valuerange: 0 ~ 999999.

PMIQ

Query parameter information of a measurement job under a BSS.

PMI Q: Bss I D, Name;

ParameterName




Name Name of themeasurement job toquery

Character string type,length range: 1 ~ 49,default value: ALL.

PMJC

Create a measurement job.

PMJ C: BssI D: MJ Name, MJ Type: MJ Obj ect : BgnDate,EndDate, Day, I nt erval , GP: FRDate, FRTi me, RP;

ParameterName


BssI DBSS identificationnumber


MJ Name Name of themeasurement job tocreate


MJ Type Type of themeasurement job tocreate

Unsigned integer type, valuerange: 0 ~ 36, defaultvalue: 0.

MJ Obj ect Based on measuredobject type

Composite unsigned integertype, value range: 0 ~1024, default value: ALL,representing all

measurement jobs under

Function

Syntax

Parameters

Function

Syntax

Parameters


34/177



ParameterName


the BSC.

Meaning of the parameters

are determined according tothe type of the measuredobject;

Measured object: SITE,module or SS7 link,

value format: X (Xrepresents SITE,module, or SS7 linknumber)

Measured object: CELL,value format: X-X (Xrepresents SITE and

CELL number in turn) Measured object: TRX,

value format: X-X-X

(X represents SITE,CELL, and TRX numberin turn)

Measured object is BSC,

value: ALL

BgnDat e Measurement startdate

Date type, default value:CURDATE, representing thecurrent date.

EndDat e Measurement stopdate Date type, default value:ENDLESS, representing notto end automatically.

Day Measurement day of aweek

Composite enumeratedtype, value range: SUN,MON, TUE, WED, THU, FRI,SAT, default value: ALL.

I nt erval Measurement intervalof a day (minutetype)

Composite time intervaltype, default value: 00-00,representing a time intervalfrom 0 oclock to 24 oclock.

GP Measurement

granularity period

Time duration type, value

range: 5N, 15N, 30N, 60N,default value: 5N (5minute).

FRDat e First report date Date type, default value:NONE (earliest possiblereport date).

FRTi me First report time(minute order)

Time type, default value:NONE (earliest possiblereport time).

RP Report period Time duration type, valuerange: 0N, 15N, 30N, 60N,6H, 12H, 24H, default

value: 0 (report


35/177



ParameterName


immediately).

PMJD

Delete multiple measurement jobs under a BSS.

PMJ D: Bss I D, Name;

Parameter




Name Name of themeasurement job todelete.

Character string type,length range: 1 ~ 49,default value: ALL.

PMJM

Modify a measurement job.

PMJ M: Bss I D, Name: NewName: BgnDat e, EndDat e, Day,I nt er val : FRDat e, FRTi me, RP;

ParameterName




Name Name of themeasurement job to

modify.


NewName Measurement jobsnew name

Character string type,length range: 1~49, defaultvalue: UNCHANGE.

BgnDat e New measurementjob starting date

Date type, default value:UNCHANGE,

If the job has beenstarted, it is forbiddento modify this item.

EndDat e New measurementjob ending date

Date type, default value:UNCHANGE,

Function

Syntax

Parameters

Function

Syntax

Parameters


36/177



ParameterName


To change it as not to

end automatically, set

the parameter to 2038-1-1

Day New measurementday of a week

Composite enumeratedtype, value range: SUN,MON, TUE, WED, THU, FRI,And SAT, default value:UNCHANGE.

I nt erval New measurementtime segment of aday (minute order)

Composite time period type,default value: UNCHANGE.

FRDat e New first report date Date type, default value:

UNCHANGE, forbidden tomodify if it has beenreported.

FRTi me New first report time(minute order)

Time type, default value:UNCHANGE, forbidden tomodify if it has beenreported.

RP New report period Time duration type, valuerange: 0N, 15N, 30N, 60N,

6H, 12H, 24H, defaultvalue: UNCHANGE.

PMJQ

Query names of all current measurement jobs under a BSS.

PMJ Q: BssI D;

ParameterName




range: 1 ~ 255.

PMJR

Restore multiple measurement jobs under a BSS.

PMJ R: BssI D, Name;

Function

Syntax

Parameters

Function

Syntax


37/177


38/177



POIQ

Query the parameter information of multiple observation jobs

under a BSS.

POI Q: BssI D, Name;

ParameterName





query.

Character string type,length range: 1 ~50, default

value: ALL, separatemultiple measure job namesby &.

POJC

Create an observation job.

POJ C: BssI D: Name, Type: Obj ect : EndDate, EndTi me;

ParameterName




Name Name of themeasurement job tocreate.

Character string type,length range: 1 ~50.

Type Type of theobservation job to

create

Unsigned integer type,default value: 0.

Obj ect Observed object Composite unsigned integertype, value range: 0 ~1024,

All observed objectsare CELL, valueformat: X-X (X

represents SITE andCELL number), only

one observed objectper job.

EndDat e Observation ending

date

Date type, default value:

ENDLESS (not to end

Function

Syntax

Parameters

Function

Syntax

Parameters


39/177



ParameterName


automatically).

EndTi meObservation endingtime (minute order)

Time type, default value:NONE (representing 00:00).

POJD

Delete multiple observation jobs under a BSS.

POJ D: BssI D, Name;

ParameterName





delete.

Character string type,length range: 1 ~50, default

value: ALL.

POJM

Modify an observation job.

POJ M: BssI D, Name: NewName: EndDat e, EndTi me;

ParameterName





create.

Character string type,length range: 1 ~50.

NewName New observation jobname

Character string type,length range: 1 ~ 50,default value: UNCHANGE(no change).

EndDat e Observation endingdate

Date type, default value:ENDLESS (not to endautomatically).

EndTi me Observation endingtime (minute order)

Time type, default value:NONE (representing 00:00).

Function

Syntax

Parameters

Function

Syntax

Parameters


40/177



POJQ

Query names of all current observation jobs under a BSS.

POJ Q: BssI D;

ParameterName




POJR

Restore multiple observation jobs under a BSS.

POJ R: BssI D, Name;

ParameterName




Name Name of theobservation job torestore

Composite character stringtype, length range: 1 ~ 50,default value: ALL.

POJS

Suspend multiple observation jobs under a BSS.

POJ S: BssI D, Name;

ParameterName




Name Name of theobservation job tosuspended

Composite character stringtype, length range: 1 ~ 50,default value: ALL.

Function

Syntax

Parameters

Function

Syntax

Parameters

Function

Syntax

Parameters


41/177



Automated Report Commands

Table 9 describes automated report commands.

TA B L E 9 A UT O M AT ED REPO RT C O M M ANDS

CommandName

Command Function

PRFC Create an automatic report file manually.

PRFSSave the automatically created report as a localEXCEL file.

PRTC Create a report task.

PRTD Delete a report task.

PRTM Modify a report task.

PRFC

Create an automatic report file manually.

PRFC: LogI DLi st ;

ParameterName Description Type and Value range

LogI DLi st Report log IDs Composite unsigned integertype, value range: 1 ~65535, separate multipleIDs by &.

PRFS

Save the automatically created report as a local EXCEL file.

PRFS: LogI DLi st ;

ParameterName


LogI DLi st Report log IDs Composite unsigned integertype, value range: 1 ~65535, separate multipleIDs by &.

Function

Syntax

Parameters

Function

Syntax

Parameters


42/177


43/177



ParameterName


BSC, value format: X(BSC No.)

If object is SITE, valueformat: X-X (BSC &SITE No.)

If object is CELL, valueformat: X-X-X (BSC,SITE & CELL No.)

Pref i x Excel file name prefixdumped at the clientterminal.


Memo Supplementaryinformation


PRTD

Delete a report task.

PRTD: TaskI D: Del Log;

ParameterName


TaskI D Report task ID todelete


Del Log Delete report logcorresponding to thereport task.

Boolean type.

PRTM

Modify a report task.

PRTM: TaskI D: NewName, DateVal , Ti meVal , BusyTi me,BgnDat e, EndDat e: ModName: Obj ect : Pr ef i x, Memo;

ParameterName


TaskI D Report task to modify Unsigned integer type, valuerange: 1 ~ 65535.

NewName New name of thereport task

Character string type,length range: 1 ~ 50,

default value: UNCHANGE.

Function

Function

Parameters

Function

Syntax

Parameters


44/177



ParameterName


DateVal New date for periodicexecution of the

report.


range:

1 ~ 31 (monthly reporttype)

1 ~ 7 (for weekly reporttype), ineffective fordaily reports, defaultvalue: UNCHANGE

Ti meVal New time for periodicexecution of report

(minute order).

Time type, default value:UNCHANGE.

BusyTi me New busy time ofreport

Composite unsigned integertype, value range: 0 ~ 23,

corresponding to 24 timesegments in a day, default

value: UNCHANGE.

BgnDat e New starting date ofreport

Date type, default value:

UNCHANGE.

EndDat e New ending date ofreport

Date type, default value:UNCHANGE.

ModName New template forreport

Character string type,length range: 1 ~ 50,

default value: UNCHANGE.

Obj ect New report object Composite unsigned integer

type, value range: 1 ~65535, default value:UNCHANGE,

If measured object isBSC, value format: X(BSC No.)

If object is SITE, valueformat: X-X (BSC &SITE No.)

If object is CELL, valueformat: X-X-X (BSC,SITE & CELL No.)

Pr ef i x Excel file name prefixdumped at the clientterminal

Character string type,length range: 1 ~ 50,default value: UNCHANGE.

Memo Supplementaryinformation

Character string type,length range: 0 ~ 200,default value: UNCHANGE.


45/177



Other Commands

Table 10 describes other commands.

TA B L E 10 OT HER C O M M ANDS

CommandName

Command Function

PBMQQuery IDs of all BTSs (cells) and their modulesunder a BSS.

PBSQ Query all BSSs.

PBTD Delete data of the basic table.

PBTQ Query IDs of all BTSs (Cells) under a BSS.

PDMQ Query performance dump parameter.

PDMS Set performance dump parameter.

PIFC Create an index formula.

PIFD Delete an index formula.

PIFM Modify an index formula.

PIFQ Query an index formula.

PLKQ Query all SS7 link numbers under a BSS.

PMOSSynchronize background performance data to amodule under a BSS.

PMTD Delete table data according to the specifiedcondition.

PMTEExport the middle table data according to thespecified date.

PMTI Import middle table data

PPIQ Query performance indices.

PPTD Delete common table data

PSMQQuery IDs of all SITEs and their modules under aBSS.

PTXQ Query all TRX numbers under a BSS.

PBMQ

Query IDs of all BTSs (cells) and their modules under a BSS.

PBMQ: Bss I D;

Function

Syntax


46/177



ParameterName




range: 1 ~ 255.

PBSQ

Query all BSSs.

PBSQ;

None

PBTD

Delete data of the basic table.

PBTD: {Del Mont h, SaveMont h}: Type;

ParameterName


Del Month Month to delete fromthe basic table.


SaveMont h Saved month Unsigned integer type, valuerange: 1 ~ 3.

Type Basic table type Composite enumeratedtype, value range: 0 ~ 6,ALL, default value is 0,

0: GSM basic table

1: GPRS basic table

2: Phase 3 NM basictable pmsbasicm

3: Phase 3 NM basictable ptrxbasicm

4: Module basicmeasurement table

5: Q3 BTS basicmeasurement table

6: GPRS BSC basicmeasurement table

ALL: Entire seven typesof basic table

Parameters

Function

Syntax

Parameters

Function

Syntax

Parameters


47/177



PBTQ

Query IDs of all BTSs (Cells) under a BSS.

PBTQ: BssI D;

ParameterName




PDMQ

Query performance dump parameter.

PDMQ;

None

PDMS

Set performance dump parameter.

PDMS: Basi cSaveMont h, Basi cPeri od: Mi dSaveDay,Mi dPer i od, Export Fl g: TypeMont h, ComPer i od;

ParameterName


Basi cSaveMont h

Month when basictable is saved


Basi cPer i od

Execution periodsetting

Period type, format: T-DD-HH-MI,

T: unsigned integer, valuerange: 0~1.

0: period type is month

1: period type is week

DD: starting date, valuerange is:

0 ~ 31 (T = 0)

1 ~ 7 (T = 1)

Function

Syntax

Parameters

Function

Syntax

Parameters

Function

Syntax

Parameters


48/177


49/177


50/177



PIFM

Modify an index formula.

PI FM: Ol dFor mul aName: NewFor mul aName: Level , Coef ,Def aul t Val ue;

ParameterName


Ol dFor mul aName

Old formula name Character string type.

NewFor mul a

Name

New formula name Character string type.

Formul a Formula content Character string type.

Level Hierarchical attributeof formula


Coef Precision coefficient offormula


Def aul t Value

The default value is0/0

Integer type.

PIFQ

Query an index formula.

PI FQ: For mul aName;

Parameter


For mul aName

Formula name Character string type.

PLKQ

Query all SS7 link numbers under a BSS.

PLKQ: EBssI D;

Function

Syntax

Parameters

Function

Syntax

Parameters

Function

Syntax


51/177



ParameterName


EBssI D BSS identificationnumber


range: 1 ~ 255.

PMOS

Synchronize background performance data to a module under aBSS.

PMOS: Bss I D: Modul eNo;




Modul eNo Module number Unsigned integer type, valuerange: 1 ~ 9, default value:1.

PMTD

Delete table data according to the specified condition.

Mode 1: Delete table data according to the specified date.

PMTD: BgnDate: EndDate: Type: Expor t Fl g;

Mode 2: Delete the table data except for the number ofspecified days.

PMDD: SaveDays: Type: Expor t Fl g;

Mode 3: Delete the general survey middle table dataaccording to the month.

PMCD: Del Month, SaveMonth: Type;

ParameterName


BgnDat e Starting date todelete the middletable

Date type, format: yyyy-mm-dd.

EndDat e Ending date to deletethe middle table


SaveDays Number of saveddays

Unsigned interger type,value range: 1 ~ 365.

Parameters

Function

Syntax

Parameters

Function

Syntax

Parameters


52/177



ParameterName


Del Month Month in which todelete general table

Unsigned interger type,

value range: 1 ~ 12.

SaveMont h Save the specifiedmonth

Unsigned interger type,

value range: 1 ~ 3.

Type Middle table type todelete

Composite enumerated type

Mode1, Mode 2:

value range: 0 ~ 3, ALL,

0: Hour table

1: Day table

2: GPRS hour table

3: Phase 3 NM

middle table

ALL: Entire fourmiddle table types

Default value: 0.

Mode3:

value range: 10 ~ 14, ALL,

10: Cell

11: BSC

12: Module

13: NSE

14: NSVC

ALL: Entire fivetypes

Default value: ALL.

Expor t Fl g Status showing if toexport the middletable

Boolean type.

PMTE

Export the middle table data according to the specified date.

PMTE: BgnDat e: EndDat e: Type;

ParameterName


BgnDat e Starting date todelete the middle

table.


Function

Syntax

Parameters


53/177



ParameterName


EndDat e Ending date to exportthe middle table

Date type, format: yyyy-

mm-dd.

Type Middle table to export Composite enumeratedtype, value range: 0 ~ 3,ALL,

0: Hour table

1: Day table

2: GPRS hour table

3: Phase 3 NM middletable

PMTI

Import middle table data.

PMTI : Name;

ParameterName


Name File name of themiddle table to import

Character string type,


PPIQ

Query performance indices.

PPI Q;

None

PPTD

Delete common table data.

PPTD: {Del Mont h, SaveMont h}: Type;

Function

Syntax

Parameters

Function

Syntax

Parameters

Function

Syntax


54/177


55/177


C h a p t e r

3

Fault ManagementCommands

This chapter explains man machine commands for faultmanagement in OMCR (V2) system. These commands aredivided in to three categories.

Alarm management commands.

Alarm rule management commands.

Test management commands.

Alarm Management Commands

To get intended operation performed, as a result of command

input in Command window of OMCR interface or Commandinputpane of Alarm Management.


1. Prior to performing this task, ensure that Command

Window on OMCR interface or Command input pane ofAlarm Management is open.

2. OMCR or required domain is running in Non Debug mode.

Table 11 describes alarm management commands.

TA B L E 11 A L A R M MA N A G E M ENT C O M M ANDS

CommandName

Command Function

AAAASynchronize the alarm stream between foregroundand background.

AACRAcquire the latest N numbers of unconfirmed system

recovery alarms.

Function

Prerequisites


56/177



CommandName

Command Function

AAIVDump of one or multiple designated alarms,

immediately.

AARQ Query an alarm.

AASV Dump historical alarms, manually.

ABCQ Query the board status.

ACAQQuery the source alarm of a correlated alarm and thecorrelation rule to generate correlated alarm.

ACBM Set CKI clock reference of the SYCK board.

ACMM Set clock mode for the SYCK board.

ACNA Acknowledge a specific current notification message.

ACUA Acknowledge the current alarm.

ACUC Confirm an unconfirmed system recovery alarm.

ACUR Manually clear (recover) a designated current alarm.

AEAQ Query all environmental alarm parameters.

AIAM Set infrared alarm for a BSC.

AMTM Set periodic switching of the MP board.

AMTSCancel periodic change over (switching) of the MPboard.

ANAC Set the trunk node alarm of the site in BSS.

ANAMModify the trunk node alarm setting of the site inBSS.

ANAQ Query all trunk node alarm settings of the system.

ANKQ Query the rack attribute under the BSS equipment.

ANKSSet the node level mode attribute of the rack underthe BSS equipment

ANMC Create a new trunk node alarm template.

ANMD Delete a trunk node alarm template.

ANMM Modify a trunk node alarm template.

ANRQQuery the notifications for a specified object and

code.

ASAD Update the knowledge base of specified alarm code.

ASBM Set the clock reference for specific SYCK board.

ASDL Set the specific MP board offline.

ASDN Disable switchover of specified SYCK board.

ASDR Reset a specified board in MP and PP.

ASDT Set the specified MP board online.

ASDWPerform active/standby switchover of the specifiedboards in MP, PP, SYCK, and DSNI.


57/177

Chapter 3 - Fault Management Commands


CommandName

Command Function

ASDY Allow switchover of specific SYCK board.

ASRD Update the knowledge base of a specified alarmreason code.

ASSG Query the database store parameters.

ASSP Modify the database store parameters.

ASTA Query alarms statistics.

ATDR Perform remote resetting of a BTS site or board.

ATEQ Query the EAM panel physical information.

ATHM Set temperature and humidity alarm for a BSC.

ATIQ Query base station equipment panel information.

AAAA

Synchronize the alarm stream between foreground and

background.

AAAA: EBscI D, Modul eNo, MaxMpAi d, Al mType;

Parameter


EBscI D BSC identificationnumber


Modul eNo BSC module number Unsigned integer type, valuerange: 0 ~ 64.

MaxMpAi d Maximum serialnumber of alarm

Unsigned integer type,minimum is 0 (only 0 issupported).

Al mType Alarm type Unsigned integer type,default value: 0, valuerange: 0 ~ 1,

0: Foregroundequipment alarm

1: Background QoSalarm

Function

Syntax

Parameters


58/177



AACR

Acquire the latest N pieces of unconfirmed system recovery

alarms.

AACR: Al mObj , Al mNum;

ParameterName


Al mObj System recoveryalarm source toacquire.

Character string type.

Al mNum Number of system

recovery alarms toacquire


range: 1 ~ 200.

AAIV

Dump of one or multiple designated alarms, immediately.

AAI V: Al mI Ds;

ParameterName


Al mI Ds Identification numberof alarm to dump

Composite unsigned integertype, value range: 1 ~4294967295.

AARQ

Query an alarm.

AARQ: Qr yType, Al mObj , {Al mCode, Al mCl s} [ , I sFi l t er ][ , BgnDay] [ , BgnTi me] [ , EndDay] [ , EndTi me] [ , Fl ag] ;

ParameterName


Qr yType Select the current andhistorical alarm


Al mObj Specify the alarmsource

Character string type.

Function

Syntax

Parameters

Function

Syntax

Parameters

Function

Syntax

Parameters


59/177



ParameterName


Al mCode Specify the alarmcode

Composite unsigned integer

type, value range: 0 ~

65535.

Al mCl s Specify the alarmclass

Composite unsigned integertype, value range: 1 ~ 4.

I sFi l t er Filter name Composite unsigned integertype, value range: 0 ~ 2.

BgnDay Starting date forquerying

Date type.

BgnTi me Starting time forquerying

Time type.

EndDay Ending date forquerying

Date type.

EndTi me Ending time forquerying

Time type.

Fl ag Reload flag Composite unsigned integertype, value range: 0 ~ 2.

AASV

Dump historical alarms, manually.

AASV {: SaveDay};

Parameter


SaveDay Starting point of thehistorical alarms todump.


ABCQ

Query the board status.

ABCQ: {EBscI D, EBscName, } RackNo, Shel f No, Sl otNo;

ParameterName




Function

Syntax

Parameters

Function

Syntax

Parameters


60/177



ParameterName


EBscName BSC alias Character string type.

RackNo Rack number of theboard


Shel f No Shelf number of theboard


Sl ot No Slot number of theboard


ACAQ

Query the source alarm of a correlated alarm and the correlation

rule to generate correlated alarm.

ACAQ: Al ar mI D;

ParameterName


Al armI D Identification numberof the correlationalarm to query


range: 1 ~ 4294967295.

ACBM

Set CKI clock reference of the SYCK board.

ACBM: {EBscI D, EBscName}, RackNo, Shel f No, Sl otNo:Cl kBase;

Parameter

Name




range: 1 ~ 255.


RackNo Rack number of theclock reference board


Shel f No Shelf number of theclock reference board


Sl ot No Slot number of theclock reference board


range: 0 ~ 27.

Function

Syntax

Parameters

Function

Syntax

Parameters


61/177



ParameterName


Cl kBase CKI clock reference Unsigned integer type, valuerange: 0 ~ 15.

ACMM

Set clock mode for the SYCK board.

ACMM: {EBscI D, EBscName}, RackNo, Shel f No, Sl ot No:Cl kMode;





RackNo Rack number of theclock mode board


Shel f No Shelf number of theclock mode board


Sl otNo Slot number of the

clock mode board


range: 0 ~ 27.

Cl kMode CKI clock reference Unsigned integer type, valuerange 0, 128 ~ 131,

0: SYCK automaticrunning status

128: Memory holding

status

129: Tracing status,

130:Fast capture status

131: Free operationstatus

ACNA

Acknowledge a specific current notification message.

ACNA: Not i I ds;

Function

Syntax

Parameters

Function

Syntax


62/177



ParameterName


Not i I ds Numerical order ofnotification messages

to acknowledge

Compound unsigned integer

type, value range: 1 ~

4294967295.

ACUA

Acknowledge the current alarm

ACUA: Al mI Ds;


Al mI Ds Numerical order ofthe alarms to confirm

Compound unsigned integertype, value range: 1 ~4294967295.

ACUC

Confirm an unconfirmed system recovery alarm.

ACUC: Al mI Ds;

ParameterName


Al mI Ds Identification numberof the unconfirmedsystem recoveryalarm.


ACUR

Manually clear (recover) a designated current alarm

ACUR: Al mI Ds;

ParameterName


Al mI Ds Numerical order ofalarms to clear

Compound unsigned integertype, value range: 1 ~

4294967295.

Parameters

Function

Syntax

Parameters

Function

Syntax

Parameters

Function

Syntax

Parameters


63/177



AEAQ

Query all environmental alarm parameters.

AEAQ;

None

AIAM

Set infrared alarm for a BSC.

AI AM: {EBscI D, EBscName}, Modul eNo: Per i od, Rl St atus,BgnDay, BgnTi me, EndDay, EndTi me;

ParameterName





Modul eNo Module number for

setting infrared alarm


range: 1 ~ 64.

Per i od Infrared alarm type Unsigned integer type, valuerange: 0 ~ 1,

0: Periodical infraredalarm

1: Infrared alarm in aspecific period

Rl St at us Infrared alarm status Unsigned integer type, valuerange: 0 ~ 1,

0: Activate

1: Deactivate

BgnDay Starting date ofinfrared alarmeffective period

Date type, default value:NULL.

BgnTi me Starting time ofinfrared alarmeffective period(seconds).

Time type, default value:NULL.

EndDay Ending date ofinfrared alarmeffective period.

Date type, default value:NULL.

Function

Syntax

Parameters

Function

Syntax

Parameters


64/177



ParameterName


EndTi me Ending time ofinfrared alarm

effective period(seconds)

Time type, default value:

NULL.

AMTM

Set periodic switching of the MP board.

AMTM: {EBscI D, EBscName}, RackNo, Shel f No, Sl ot No:ChOvTi me;

ParameterName





RackNo Rack number of theboard to set


Shel f No Shelf number of theboard to set,


Sl ot No Slot number of theboard to set


ChOvTi me Changeover time isthe time to switchover (seconds)

Time type.

AMTS

Cancel periodic change over (switching) of the MP board.

AMTS: {EBscI D, EBscName}, RackNo, Shel f No, Sl otNo;

ParameterName




range: 1 ~ 255.


RackNo Rack number of theMP board to cancel


Function

Syntax

Parameters

Function

Syntax

Parameters


65/177



ParameterName


change over.

Shel f NoShelf number of theMP board to cancelchange over.


Sl otNo Slot number of theMP board to cancelchange over


ANAC

Set the trunk node alarm of the site in BSS.

ANAC: EBssI D {, ESi t eI D, ESi t eNm}, RackI D: TmpNo;

ParameterName




ESi t eI D Site identificationnumber

Unsigned integer type, valuerange 1 ~ 1024.

ESi t eNm Site alias Character string type.

RackI D Rack identificationnumber


TmpNo Template number ofthe trunk node alarmmodule to set.


ANAM

Modify the trunk node alarm setting of the site in BSS.

ANAM: EBssI D, {ESi t eI D, ESi t eNm}, RackI D: TmpNo;

ParameterName






ESi t eNm Site alias Character string type.

Function

Syntax

Parameters

Function

Syntax

Parameters


66/177



ParameterName


RackI D Rack identificationnumber


range: 1 ~ 4.

TmpNo Template number ofthe trunk node alarmmodule to set.


range 1 ~ 16.

ANAQ

Query all trunk node alarm settings of the system.

ANAQ;

None

ANKQ

Query the alarm on/off mode setting of a site rack.

ANKQ: EBssI D, ESi t eI D, RackNo: Par aGr p;

ParameterName






RackNo Rack number Unsigned integer type, valuerange: 1 ~ 4.

ParaGr p Parameter attributepacket type

Enumerated type, valuerange: ALL.

ANKS

Set the node level mode attribute of the rack under the BSSequipment.

ANKS: EBssI D, ESi t eI D, RackNo: Al mMode;

Function

Syntax

Parameters

Function

Syntax

Parameters

Function

Syntax


67/177



ParameterName




range: 1 ~ 255.



range 1 ~ 1024.

RackNo Rack number Unsigned integer type, valuerange: 1 ~ 4.

Al mMode Alarm level mode ofthe trunk node of arack.


It corresponds to thelower 12 bits of a binaryvalue, and representsthe alarm modes of allmain nodes of the rack.

bit0, bit1.., bit12correspond to thenormal alarm levels oftrunk node 1, trunknode 2.., and trunknode 12, respectively.For each bit, 0represents that alarm isON for thecorresponding trunknode, and 1 representsthat alarm is OFF.

ANMC

Create a new trunk node alarm template.

ANMC: TmpNo: Nd1ACl s, Nd1ACnt , Nd2ACl s, Nd2ACnt ,Nd3ACl s, Nd3ACnt , Nd4ACl s, Nd4ACnt , Nd5ACl s, Nd5ACnt ,Nd6ACl s, Nd6ACnt , Nd7ACl s, Nd7ACnt , Nd8ACl s, Nd8ACnt ,Nd9ACl s, Nd9ACnt , Nd10ACl s, Nd10ACnt , Nd11ACl s,Nd11ACnt , Nd12ACl s, Nd12ACnt , Nd13ACl s, Nd13ACnt ,Nd14ACl s, Nd14ACnt , Nd15ACl s, Nd15ACnt , Nd16ACl s,

Nd16ACnt , Nd17ACl s, Nd17ACnt , Nd18ACl s, Nd18ACnt ,Nd19ACl s, Nd19ACnt , Nd20ACl s, Nd20ACnt ;

ParameterName


TmpNo Number of trunk nodealarm template tocreate.


Ndi ACl s Alarm class of trunknode i (i is from 1 ~20).

Unsigned integer type, valuerange: 1 ~ 4, default value:NULL.

Parameters

Function

Syntax

Parameters


68/177



ParameterName


Ndi ACnt Alarm content oftrunk node i (i is from

1 ~ 20).

Character string type, value

range: 1 ~ 98, default

value: NULL.

ANMD

Delete a trunk node alarm template.

ANMD: TempNos;


TempNos Trunk node templatenumber


ANMM

Modify a trunk node alarm template.

ANMM: TmpNo : Nd1ACl s, Nd1ACnt , Nd2ACl s, Nd2ACnt ,

Nd3ACl s, Nd3ACnt , Nd4ACl s, Nd4ACNT, Nd5ACl s, Nd5ACnt ,Nd6ACl s, Nd6ACnt , Nd7ACl s, Nd7ACnt , Nd8ACl s, Nd8ACnt ,Nd9ACl s, Nd9ACnt , Nd10ACl s, Nd10ACnt , Nd11ACl s,Nd11ACnt , Nd12ACl s, Nd12ACnt , Nd13ACl s, Nd13ACnt ,Nd14ACl s, Nd14ACnt , Nd15ACl s, Nd15ACnt , Nd16ACl s,Nd16ACnt , Nd17ACl s, Nd17ACnt , Nd18ACl s, Nd18ACnt ,Nd19ACl s, Nd19ACnt , Nd20ACl s, Nd20ACnt ;

ParameterName


TmpNo Number of trunk node

alarm template tomodify


range: 1 ~ 16.

Ndi ACl s Alarm class of trunknode i (i is from 1 ~20)

Unsigned integer type, valuerange: 0 ~ 4, default value:NULL,

0: Delete the trunk nodealarm

NULL: No modification inthe main node alarm

Ndi ACnt Alarm content oftrunk node i (i is from

1 ~ 20).

Character string type, valuerange: 1 ~ 98, default

value: NULL.

Function

Syntax

Parameters

Function

Syntax

Parameters


69/177



ANRQ

Query the notifications for a specified object and code.

ANRQ: Not i Obj , Not i Code, BgnDay, BgnTi me, EndDay,EndTi me;

ParameterName


Not i Obj Specify thenotification object

that reportsnotification.

Compound unsigned integertype.

Not i Code Specify notificationcode


BgnDay Starting date forquerying

Date type.

BgnTi me Starting time forquerying

Time type.

EndDay Ending date forquerying

Date type.

EndTi me Ending time forquerying

Time type.

ASAD

Update the knowledge base of specified alarm code.

ASAD: Al mCode, User Des;

ParameterName


Al mCode Alarm code updatedby the user


User Des User given method tosolve the alarm

Character string type,maximum length: 249.

Function

Syntax

Parameters

Function

Syntax

Parameters


70/177



ASBM

Set the clock reference for specific SYCK board.

ASBM: {EBscI D, EBscName}, RackNo, Shel f No, Sl otNo:Cl kBase;

ParameterName


EBscI D BSC ID of the boardfor setting clock

reference.

Unsigned int

Documents

Sjzl20062307-ZXG10-BSS (V2[1].97) Command Manual - Volume II