USA | AUSTRALIA | EUROPE

rolleaseacmeda.com© 2016 Rollease Acmeda Group

LIGHT MANAGEMENT MASTERED

SKYLINE 3" MOTORIZED SHADE SYSTEMALKENZ SUNSHADOW 3000 NET SOLAR SCREEN

141

5.84

E

E

C ROLLEASEACMEDA

DIMENSIONS IN "MM"

SCALE:1:10

SIZE: A3PROPRIETARY & CONFIDENTIALTHE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF ROLLEASE ACMEDA. ANY REPRODUCTION IN PART OR WHOLE WITHOUT THE WRITTEN PERMISSION OF ROLLEASE ACMEDA IS PROHIBITED.ITEM CODE:

SYSTEM SPECIFICATION SHEET 07 Dec 2017DRAWN:

www.rolleaseacmeda.com

ITEM DESCRIPTION: Skyline 3" Shading System

REV.

Skyline Single Shade System with 3” Fascia

external hembar color

white vanilla anodized bronze black

clutch color finishes: white, vanilla, gray,

blackfascia, external hembar, end cap

color finishes: white, vanilla, anodized, bronze, black

SL10/SL15 Chain Diverter

SL20 Chain Diverter

Side Channels

1.22

2.34

1.05 .72

A

BC

Single Shade 3” Fascia - Q2 28mm Motor or Q6 35mm Automate Motor

If you add the Rollease 2-piece side-channels (in the drawing above), additional 2 ½” are deducted from the fabric width.

Our Innovation & Design Centre in Melbourne, AU leverages the knowledge and experience of over 20 engineers, designers, technicians and product managers to conceptualize, develop and test new technologies and designs.

The Automate™ line has benefited significantly from Rollease Acmeda’s commitment and approach to innovative design and calculated development.

A hardware system designed for motorization

Quiet motors and finished shades

Low light gap bracketry

Rollease Acmeda motorized shade systems appear and perform at a best in class level because of a unified hardware and motorization design approach.

Rollease Acmeda is committed to innovation and development that benefit consumers in meaningful ways.

INNOVATION & DESIGN TO MAXIMIZE COMFORT

Automate™ indoor sun sensorAutomate™ sun sensors automatically manage daylighting at each window, minimizing reliance on and costs of artificial light.

The Automate™ Mobile App enables simple, intuitive control and system configuration from your smart phone or tablet. Advanced features like scheduling and remote access allow users to get the most out of their smart shades.

EXPERIENCE A NEW LEVEL OF CONTROL

Paradigm remote controlsParadigm remote controls offer modern features including LCD displays, individual, group and ALL control and precision levelling, giving users complete control from an elegant hand held remote.

Available with 1 or 15 channels.

Automate™ wall switchesAutomate™ wall switches come in both cut in and flush mount configurations and provide a sensible control option for room and whole home control.

Available with 1, 5 or 15 channels.

The Automate™ PULSE hub provides the heartbeat of the Automate™ smart home experience.

With wi-fi built in, simply plug in where convenient and connect to the local wireless network. Automate™ shades can be then controlled from your

smart phone/tablet or integrated within a whole home control system.

THE HEARTBEAT OF YOUR MOTORIZED

SHADES

SET UP TO 20 TIMERS

SET UP TO 20 SCENES

MANAGE UP TO 20 ROOMS

MANAGE UP TO 5

LOCATIONS

SETUP WIZARD

The home has never been so smart. Control, scheduling, automation...

instantly from your phone or voice.

ARC communication protocol ensures Automate™ motorized shades are reliable and easy to use… paving the way for the window coverings of tomorrow’s smart home.

CLEVER COMMUNICATION

Automate™ Motorization utilizes a new Radio Frequency platform called Automate™ Radio Communication - ARC. The ARC communication protocol utilizes a 433mHz radio frequency, well known for strong, reliable communication in the connected home devices space.

Automate™ ARC protocol also features bi-directional communications which empowers users and connected systems to experience shade control like never before.

COMMUNICATE WITH CONFIDENCE

BATTERY HEALTH STATUS

LIVE ANIMATED FEEDBACK

EFFICIENT PROGRAMMING

1 REMOTE FOR YOUR ARC™

MOTORS

RS485 - Serial Interface to3rd party automation.

Automate’s™ core motor line, Li-ion, utilizes state of the art lithium ion battery technology integrated with the shades.

No wires for Easy Retrofit

Extended battery life with 500 expected up/down cycles per charge

Rechargeable from 12v wall charger

No bulky, external battery pack

AUTOMATE™ LI-ION

Li-ion 0.2Nm 18 mm, ~48 DB Up to 48”x60”

Li-ion 1.1Nm 25 mm, ~46 DB Up to 84”x84”

Li-ion Q2.0Nm 28 mm, ~44 DB Up to 120”x120”

Li-ion 3.0Nm & Q3.0Nm 35 mm, ~44 DB Up to 144”x144”

Li-ion Q10.0Nm 45 mm, ~42 DB Up to 168”x168”

Light sensing automatically manages daylighting at each

window, minimizing reliance on and costs of artificial light.

LOW LIGHT SOLAR

Upgrade Li-ion motors to include Automate’s™ industry leading low light harvesting solar panel for a completely off-grid system that virtually never needs attention.

BATTERY POWERED

FAVORITE POSITION

LEVEL CONTROL

SELECTABLE RPM

QUIET OPERATION

BEST IN CLASS (Q2.0)

LITHIUM ION & BATTERY SHADES

Teach your old home new tricksAutomate™ Li-ion battery powered motorized shades are a perfect retro-fit for existing homes or small commercial projects. Available in today’s popular Roman and Roller shade applications, Li-ion powered motors require no electrical wiring, no external battery pack and no complicated installation.

CELLULAR SHADES

ROMAN SHADES

ROLLER SHADES

VENETIAN BLINDS

AC WIRED SHADES

Power, when you need itAutomate™ AC powered motorized shades are a great choice for homes with very large windows and awnings as well as large commercial projects.

With lifting capacities up to 14’ x 14’ and run times up to 4 minutes, Automate™ AC powered shades are fit for projects of any size.

ROMAN SHADES

ROLLER SHADES

VENETIAN BLINDS

DRAPERY

Drape your home in luxuryAutomate™ motorized draperies are powered by AC line voltage, and can support draperies up to 110 lbs. (50kg) using our proprietary ARC protocol.

In addition, the drapery motor features an innovative Soft Touch technology, where you can automatically open or close your curtains with one soft touch.

DRAPERIES VERTICALS

DC WIRED SHADES

Design with daylightAutomate™ DC powered motorized shades are an excellent choice when designing a new home, motorizing an entire existing home, or planning a small commercial project. DC wired shades are maintenance free and low voltage DC wiring keeps installation costs to a minimum.

CELLULAR SHADES

ROMAN SHADES

ROLLER SHADES

VENETIAN BLINDS

THE AUTOMATE™ RANGE

RESIDENTIAL | AUTOMATE™ LI-ION & DC WIRED MOTORS

HOSPITALITY | DRAPERY

COMMERCIAL | AUTOMATE™ AC WIRED MOTORS

AUTOMATE™ LI-ION WIREFREE MOTORS

• Leveling control

• Simple limit setting and adjustment

• Favourite position

• 3 operational speed settings available

• 2 way RF communication

• Rechargable built in Li-ion battery

• Optional solar powered charger

• Over 500 up / down operations on asingle charge (based on recomendedmaximum shade sizes)

• ARC™ protocol featuring efficientprogramming, battery powerconservation and bi-directionalcommunication

Leading innovator of precision hardware and automated shade solutions.USA | AUSTRALIA | EUROPE rolleaseacmeda.com

© Rollease Acmeda Group

AUTOMATE | Li-ion Q3.0Part #: MTDCBRFQ45-3

Description: DC Tubular motor with in-built Lithium-ion rechargeable battery.

BATTERY POWERED

QUIET OPERATION

433 MHZBI-DIRECTIONAL

SELECTABLE RPM

LEVELING CONTROL

ELECTRONIC LIMIT

SOLAR CHARGING

FAVORITE POSITION

• Recommended max shade size 144”x144”

• Leveling Control

• Simple limit setting and adjustment

• Favorite position

• 3 operational speed settings available

• 2 way RF communication

• Rechargeable built in Li-ion battery

• Up to 500 up & down cycles, per charge

(based on recommended max shade size).

• Optional Solar powered charger

• New ARC protocol for simple programming

FEATURES TECHNOLOGIES

DIMENSIONS

SPECIFICATIONS

Voltage 12 Limit Switch Type Electronic

Torque 3.0Nm Amps 1.67A

Max Run Time 10 Min Battery Size/Type 4400mAH

Speed 28 RPM (Adjustable to 24 or 20) Temp Working Range 32°F to 140°F (0°C to 60°C)

Radio Frequency 433.92 MHz Insulation Class III

RF Modulation FSK Sound Level ~40DB

IP Rating IP44

FEATURE/SYSTEM SKYLINE

Max size (single shade; larger if using link system option) 16’ w x 16’ h

Economics Most affordable

Manual operation Yes

Premium Frictionless manual control Yes - Standard

Automated option – wall remote or APP Yes

Link system – straight line

Link System 90 degree No

Decorative fascia option Yes

Recessed ceiling application – ‘pocket’ Yes

Dual Shade option Yes

Exterior Application No

Side Channels for darkening Yes

Wire Guide Tensioning Control No

SOLAR SHADE OPERATING SYSTEM COMPARISON GUIDE

1. Linking system enables operating multiple shades with one point of control, and facilitates asmaller light gap between shades.

2. Patented spring assisted gearing clutch provides frictionless manual lift and control systemwhich makes opening large shades effortless.

3. Wire guide tensioning is designed to manage large indoor shades and is recommend forexterior shades of all sizes.

Notes

Page 2

Yes

FASCIA WIDTH 2X .08END CAPTHICKNESS

.75FULLYDEPLOYED

3.29

3.46

MAX ROLL2.75

1.59

1.19

.46 (SHADEDEDUCTION)

.77 (SHADEDEDUCTION)

SCALE DRAWN BY REVISION

NOT TO SCALE. DIMENSIONS IN INCHES. EnZ 1

DRAWING NAME DRAWING NUMBER

SKLYINE 3 IN FASCIA, RGALH/RGALSAH CLUTCH, RTEA4 1.5 DIA TUBE, SLFBKT3 BRACKET

A1021

RollEase Headquarters200 Harvard Avenue

Stamford, CT 06902-6320 USAOffice: 203.964.1573/ 800.552.5100

www.rollease.com

BEAD CHAIN

CLUTCH, TUBE ANDSHADE ASSEMBLY

TENSIONDEVICE

SHADE FABRIC

BRACKET

The motorized Skyline roller shade system offers a range of three Automate motors with three tube diameters to suit a variety of applications. Featuring ARC (Automate Radio Communication), the 45mm Skyline Automate system provides an intelligent, Li-ion battery or a DC powered solution.

AESTHETIC FEATURES• Slim motor head for minimal light gap

ASSEMBLY / PRODUCTION FEATURES• Greater flexibility with installation with spring loaded pin end• Crown, drive and adapters available to suit variety of tube sizes

FUNCTIONAL BENEFITS• Leveling control• Simple limit setting and adjustment • Favorite position • 3 operational speed settings• 2-way RF communication • ARC protocol for simple programming

4

7

1

2

3

6

5

5SUN SENSOR

SYSTE

M - Q

UIC

K R

EFE

RE

NC

E G

UID

E

RO

LLER

S | A

UTO

MATE

ro

llea

se

ac

me

da

.co

m

Skyline Automate | 45mm

SYSTEM UPGRADES CONTROL OPTIONS CHARGERS

• CASSETTE 80/100/120

• FASCIA 3"/4"/5"

• LINK SYSTEM

• POCKETS 3"/4"/5"/6"

PARADIGM REMOTES

ELECTRICWALL SWITCH SOLARSMART HOME PULSE

PRODUCT OPTIONS

SYSTEM INDEX

1 Automate Motor | 45mma. MTDCBRFQ45-3 - Li-ion Q3.0b. MTDCBRFQ45-10 - Li-ion Q2.0c. MTDCRFQ45-3 - DCRF Q3.0d. MTDCRFQ45-10 - DCRF Q10e. MTACQRF45-10 - ACRF Q10f. MTACRF45-15 - ACRF Q15

2 Motor Adapter MTAD-45-SL

3 BracketsSLB###x SLNB###x

4 Bracket Covers SLBC###x SLNBC###x

5 Pin End & Adapter SLPEHD53xx + RA2xx

6 Crown and Drive Kit MTCRDR-45-2 - Kit for 2" tube MTCRDR-45-2.5 - Kit for 2½" tubeMTCRDR-45-3.24 - Kit for 3¼" tube

7 Aluminium TubeRTEA5T## - 2" tube RTEA6T## - 2½" tubeRTEA7T## - 3¼" tube

8 Screws for AdapterSLAMSCREW

# - Sizexxx- Color

PIN ENDS PER COVER PER BRACKET ADAPTERS

CLUTCH SIDE PIN END SIDE HD PIN END BRACKET COVER SLB6xxxx SLNB6xxxx SLA4xxx RA25xx Other*

SL5/SL20 .45" [12mm] .30" [8mm] .33" [9mm] .7" [2mm] .19" [5mm] .18" [5mm] .06" [2mm] .03" [1mm] .00" (0mm)

SL10/SL15 .38" [10mm] .30" [8mm] .33" [9mm] .7" [2mm] .19" [5mm] .18" [5mm] .06" [2mm] .03" [1mm] .00" (0mm)

SL30 .50" [13mm] .30" [8mm] .33" [9mm] .7" [2mm] .19" [5mm] .18" [5mm] .06" [2mm] .03" [1mm] .00" (0mm)

G200 .56" [15mm] .30" [8mm] .33" [9mm] .7" [2mm] .19" [5mm] .18" [5mm] .06" [2mm] .03" [1mm] .00" (0mm)

G400 .50" [13mm] .30" [8mm] .33" [9mm] .7" [2mm] .19" [5mm] .18" [5mm] .06" [2mm] .03" [1mm] .00" (0mm)

These deductions allow an easy and quick installation (instal the pin end first, then the clutch side) *All other adapters require no further deductions

BRACKET MAX ROLL SIZE SL5/SL10 SL15/SL20/G200 SL30/G400

SLNBxx650xx 2.35" [59.0mm] Compatible - -

SLxx660xx 3" [76.2mm] Compatible Compatible -

SLxx680xx 4" [101.6mm] Compatible Compatible Compatible

SLxx690xx 5" [127.5mm] Compatible Compatible Compatible

CLUTCH LOAD TUBECORD

or BEAD CHAIN

SL5 5.6lbs (2.5kg) 1" (25mm) Both

SL10 11 lbs (5.0kg) 1⅛" (28mm) Both

SL15 16.5 lbs (7.5kg) 1⅛" (28mm) Both

SL15 12 lbs (5.5kg) 1½" (38mm) Both

SL20 20 lbs (9.1kg) 1½" (38mm) Bead

SL20 15 lbs (6.8kg) 2" (50mm) Bead

SL30 22 lbs (10.0kg) 2" (50mm) Bead

SL30 18 lbs (8.2kg) 2½" (63mm) Bead

SL30 14.4 lbs (6.5kg) 3¼" (83mm) Bead

G200 24 lbs (10.9kg) 1½" (38mm) Bead

G200 18 lbs (8.2kg) 2" (50mm) Bead

G200 14.4 lbs (6.5kg) 2½" (63mm) Bead

G400 40 lbs (18.2kg) 2" (50mm) Bead

G400 32 lbs (14.5kg) 2½" (63mm) Bead

G400 25lbs (11.4kg) 3¼" (83mm) Bead

Please note that the loads are max loads for clutches.Max loads will not produce comfortable pull forces.

Max Roll

CLUTCH/TUBE

1"[25mm]

1-1/8"[28mm]

1-1/4"[32mm] [40mm] 43mm

1-1/2"[38mm]

2"[50mm]

2-1/2"[63mm]

3-1/4"[83mm]

SL5/SL10 Compatible Compatible SLA03x SLA04x SLA43x SLA53x - - -

SL15 - Compatible SLA03x SLA04x SLA43x SLA53x - - -

SL20/G200 - - - - - Compatible RA2 RA25 -

SL30/G400 - - - - - Compatible RA2 RA25 RA25

PIN END SIDE WITHBRACKET & COVERS

CLUTCHSIDE TUBE WIDTH

BLIND WIDTH

SYSTE

M - Q

UIC

K R

EFE

RE

NC

E G

UID

E

RO

LLER

S | S

KYLIN

E

USA | AUSTRALIA | EUROPE info@rolleaseacmeda.com | rolleaseacmeda.com©Copyright 2016 Rollease Acmeda Group

ro

llea

se

ac

me

da

.co

m

SPECIFICATIONS

MAX ROLL

MAX HOLD CAPACITY

DEDUCTION TABLE

TUBE ADAPTER COMPATIBILITY CHART

--

1

1

2

34

6

7

5

SYSTE

M - Q

UIC

K R

EFE

RE

NC

E G

UID

E

EASY-LINK™ SYSTEM EASY-LINK™ / UNI-JOINT™ SKYLINE EASY-LINK™

SYSTEM INDEX

1 Aluminum Tube - S40 / S45

2 Easy-Link™ Int Male Drive

RB41-1002-xxx040 - S40

RB41-1002-xxx045 - S45

3 Easy-Link™ Int Female Drive

RB41-1001-xxx040 - S40

RB41-1001-xxx045 - S45

4 Easy-Link™ Int Bearing Bracket

RB41-0311-xxx0## - AX [40 or 55mm)

RB41-0353-xxx0## - LX [40 or 55mm)

5 Easy-Link™ Uni-Joint Bearing Bracket

RB41-4553-xxx0## - LX 45° [40 or 55mm)

RB41-9053-xxx0## - LX 90° [40 or 55mm)

RB41-4553-xxx0## - LX 45° [40 or 55mm)

RB41-4553-xxx0## - LX 45° [40 or 55mm)

SYSTEM INDEX

1 Aluminum Tube - 38/50mm (1.5"/2")

2 Skyline Easy-Link™ Int Male Drive

RB41-1002-xxx038 (RA2xx needed for 2" tube)

3 Skyline Easy-Link™ Int Female Drive

RB41-1001-xxx038 (RA2xx needed for 2" tube)

6 Easy-Link™ Skyline Bracket

RB41-0321-xxx038 - (for SLNB660)

RB41-0321-xxx050 - (for SLNB680)

7 Skyline Easy-Link™ Bracket Disk + Bearing

RB41-0502-xxx000

CHAIN CONTROL SYSTEMS40/S45

CHAIN CONTROL SYSTEM

AUTOMATE AUTOMATE

CRANK GEAR SYSTEM S45

COLOR RANGE

pure white069

rollease white075

sandstone269

silver grey338

barley283

black050

black050

COMBO SQUAREBRACKET

SKYLINE EASYLINK™

EASYLINK™

UNI-JOINT™

DOUBLE V-SLIMBRACKET

PIN TO PIN DISK

COLOR RANGE

SYSTEM OPTIONS

CONTROL OPTIONS

SYSTEM OPTIONS

CONTROL OPTIONS

The Rollease Acmeda Easy-Link™ system was designed to allow for multiple blinds to be controlled using a single motor or chain control operation. Achieving minimal gaps between each blind, the Easy-Link™ system provides the perfect addition to the Easy-Lock range when linking blinds.

AESTHETIC FEATURES

• Color matched components

ASSEMBLY / INSTALLATION BENEFITS• Compatible with Easy-Lock system• Individual blind level adjustment post installation without any disassembly• Unique retractable male & female adapters comprising of glass filled nylon 14 step symmetrical adjustment

FUNCTIONAL BENEFITS• Optional standard End/Idler Plug adapter allows banded blinds to be controlled independently• Bearing ensures a quiet & smooth operation• Reduced number of controls required

*The Easylink is rated for 3Nm and the Skyline Easylink is rated for 2Nm

EASY-LINK SKYLINE EASY-LINK PIN TO PIN

EASY-LINK DEDUCTION 17mm (0.67") 19mm (0.75") 14mm (0.55")*

* The shades need to be removed by unlocking the bracket bearing disk. If the easy unhooking method to release the shades is needed, add 6mm deduction per wanted side.

2 4 6 8 10 12 14 22 ft

ft m m

2

4

6

8

10

12

FABRIC THICKNESS: 0.6mm (0.024")

WEIGHT BAR: D30 Bottom Rail

*This chart indicates the maximum blind width/drop where the Easy-Link system is to be installed. The chart does not take into consideration the control systemcapacity; please read in conjunction with the nominated control system capacity chart.

OUTSIDE SPECIFICATIONS

MINIUM NO. OF LINKS

0

1

2

PARAMETERS

TUBE: RTEA4 38mm (1.5")

FABRIC DENSITY: 420gsm (13.39oz/yd^2)

4.013

3.8

3.6

3.411

3.2

3.0

2.89

2.6

2.4

2.27

2.0

1.8

1.65

1.4

1.2

1.03

0.8

0.6

6.0 6.2 6.4 6.6 6.8 7.04.8 5.0 5.2 5.4 5.6 5.83.6 3.8 4.0 4.2 4.4 4.62.4 2.6 2.8 3.0 3.2 3.41.2 1.4 1.6 1.8 2.0 2.20.6 0.8 1.0

2319 20 2115 16 17 1811 137 9

WIDTH

DROP 3 52 4 6 8 10 12 14 22 24 26 27 29 31 33 ft

ft m m

2

4

6

8

10

12

2

3

4

5

MINIUM NO. OF LINKS

0

1

PARAMETERS

TUBE: S45 LIGHT

FABRIC DENSITY: 420gsm (13.39oz/yd^2)

FABRIC THICKNESS: 0.6mm (0.024")

WEIGHT BAR: D30 Bottom Rail

*This chart indicates the maximum blind width/drop where the Easy-Link system is to be installed. The chart does not take into consideration the control system capacity; please read in conjunction with the nominated control system capacity chart.

4.013

3.8

3.6

3.411

3.2

3.0

2.89

2.6

2.4

2.27

2.0

1.8

1.65

1.4

1.2

1.03

0.8

0.6

9.6 9.8 10.08.4 8.6 8.8 9.0 9.2 9.47.2 7.4 7.6 7.8 8.0 8.26.0 6.2 6.4 6.6 6.8 7.04.8 5.0 5.2 5.4 5.6 5.83.6 3.8 4.0 4.2 4.4 4.62.4 2.6 2.8 3.0 3.2 3.41.2 1.4 1.6 1.8 2.0 2.2

30 32

0.6 0.8 1.0

23 25 2819 20 2115 16 17 1811 137 9

WIDTH

DROP 3 5

PARAMETERSTUBE: S45 LIGHTFABRIC DENSITY: 420 gsm (13.39oz/yd2)FABRIC THICKNESS: 0.6mm (0.024")WEIGHT BAR: D30 Bottom Rail

*This chart indicates the maximum blind width/drop where the Easy-Link system is to be installed. The chart does not take into considera-tion the control system capacity; please read in conjunction with the nominated control system capacity chart.

PARAMETERSTUBE: RTEA4 38mm (1.5")FABRIC DENSITY: 420 gsm (13.39oz/yd2)FABRIC THICKNESS: 0.6mm (0.024")WEIGHT BAR: D30 Bottom Rail

*This chart indicates the maximum blind width/drop where the Easy-Link system is to be installed. The chart does not take into consideration the control system capacity; please read in conjunction with the nominated control system capacity chart.

2

3

4

5

MINIMUM NO. OF LINKS

0

1

OUTSIDE SPECIFICATIONS

MINIMUM NO. OF LINKS

0

1

2

SYSTE

M - Q

UIC

K R

EFE

RE

NC

E G

UID

E

AUSTRALIA | EUROPE | USArolleaseacmeda.com | info@rolleaseacmeda.com©Copyright 2016 All Rights Reserved Rollease Acmeda Group

SYSTEM CAPACITY CHARTS - EASY-LINK™ SYSTEM CAPACITY CHARTS - SKYLINE EASY-LINK™

DEDUCTIONS MAX ROLL/DIMENSIONS

TUBE WIDTH

EASY LINK DEDUCTION

TUBE WIDTH

BLIND WIDTH

BRACKET RB41-0311/0353-xxx040 RB41-0311/0353-xxx055

Pitch 40mm (1.57") 55mm (2.17")

Length 60mm (2.36") 75mm (2.95")Max. Roll 77mm (3.00") 105mm (4.10")

BRACKET RB41-0321-xxx038 RB41-0311-xxx050Pitch 41mm (1.60") 55mm (2.17")

Length 67mm (2.64") 80mm (3.15")Max. Roll 76mm (3.00") 102mm (4.00")

- UNI-JOINT, REFER TO MANUAL - UNI-JOINT, REFER TO MANUAL

40mm (1.57”)

LEN

GTH

PITC

H

MAX ROLL

38mm (1.5”)

PITC

H

LEN

GTH

50mm (2.00”)

MAX ROLL

SKYLINE EASY-LINK S40/45 EASY-LINK

5” POCKET SYSTEM

FASCIA COLORS

OVERVIEW Black, Gray/Anodized, Vanilla, Bronze, White

• Gray / Anodized• White

• Square Panel• Brackets• End Caps / Face Plates

Leading innovator of precision hardware and automated shade solutions.

USA | EUROPE | AUSTRALIA rolleaseacmeda.com

ROLLEASE ACMEDA CONTRACT PROGRAMHEM BAR OPTIONS

The below options are available for use on Rollease Acmeda Contract system solutions. D30 BOTTOM RAIL

INTERNAL HEM BAR

EXTERNAL HEM BAR

F4115 Heavy Duty Bottom Rail

EXTREME FD42 HEM BAR F56 HEM BAR

15mm (0.59”)

41mm (1.63”)

42mm (1.66”)

18mm (0.71”)

23mm (0.91”)

13mm (0.52”)

29mm (1.14”)

5mm (0.21”)

38mm (1.50”)

25mm (1.02”)

56mm (2.20”)

SYSTEM RENDERING

Page 3

D30 HEM BAR OVERVIEW

DEDUCTIONS SPLINE ATTACHMENT

Soft Fabrics Rigid Fabrics

Spline

Ballast

Brush

SYSTEM CLOSE UP COLOR RANGE

SYSTEM OPTIONS CONTROL OPTIONS

1

1

2

2

3

4

1

1

Page 5

INTERNAL WIRE GUIDE OVERVIEW

AUTOMATE™ Li-ion Solar Charging Power Panel

SOLAR POWERED

FEATURES:

• Plug n’ play for all AUTOMATE Li-ion motors & rechargeable battery packs

• Sleek design allows for unobtrusive placement behind most headrails

• Parallel wiring options support large shades

• Monosilicon/crystal technology allow for up to 30% more efficiency than alternatives

• Low light harvesting technology supports power generation in varied conditions

AUTOMATE | Li-ion Solar charging power panel provides supplemental power to all Li-ion wirefree motors or rechargeable battery packs.

The monosilicon/crystal solar panel provides power in varied conditions including low light situations. Panels can also be wired in parallel to provide additional power for larger applications.

Users can refer to the AUTOMATE Solar Guide for direction related to regional solar conditions and expected performance.

INST

R. M

TSO

LPA

N-B

V1.

4 O

CT

2017

4 | Automate™ Programming Instructions | MTSOLPAN-B ROLLEASE ACMEDA

1 INSTALLATION

Step 1.

IMPORTANT!

Locate the optimal position for solar panel in window.

Ensure all components are available for installation scenario.

Avoid covering of whole solar panel cell.

Ensure solar panel has adequate exposure to sunlight.

When selecting a position for solar panel, consider any external obstructions like trees, building, signs, etc. that may limit the amount of sun light reaching onto the solar panel.

IMPORTANT!Fully charge the Motor or Battery Pack before beginning Solar Panel installation.

Compatible components:

Installation Scenarios:

PARTS DESCRIPTION

MTSOLPAN-B Solar Panel for 18/25/28/35/45mm Battery Motors (Optional)

MTDCB-CHARGE Region Specific Recharger for DC Battery Motors (18/25/28/35/45) (Optional)

MTBPCKR-28 Rechargeable Battery Pack (Optional)

MTDCB-CBLXTxx DC Battery Motor Cable extender 6”/48”/96” (152/1219/2438mm) (Optional)

MTDCBxxxxx AUTOMATE | Li-ion Motor (18/25/28/35/45)

MTDCB-YCBL-SOL Solar Panel Y Harness Cable

Li-ion Motor

DC Motor

Battery Pack

Plug directly into Motor

or use:

Solar Panel Y Cable

or

Cable Extender for parallel Solar Panels

OPTIONAL

OPTIONAL

Solar Panel

Solar Panel

Charger

Female

Male

5 | Automate™ Programming Instructions | MTSOLPAN-B ROLLEASE ACMEDA

IMPORTANT!

Clean the window or surface with alcohol wipe.

Allow surface to dry.

Peel protective film off adhesive tapes.

Press firmly onto fixing surface.

Apply hand pressure for 5 seconds and check if firmly attached.

iii.

Ensure any cables are kept clear of fabric at all times.

Step 3. Connect Solar Panel cable (female) connector to required (male) connector.

IMPORTANT!Any partial or total covering of any solar panel cell will affect solar panel performance.

OPTION B.Clean Solar panel front surface with alcohol wipe.

Allow surface to dry.

Peel protective film off one side of adhesive tape and attach to one end of Solar panel.

Press adhesive tape firmly onto Solar panel surface for 5 seconds to ensure good adhesion.

Ensure that adhesive tape does NOT cover any portion of the Solar panel cells.

Repeat previous steps for attaching adhesive tape to other end of Solar panel.

i.

ii.

Attaching Solar Panel via Adhesive Tape to a Window or surface

Step 2.OPTION A.Installing Solar panel

Install mounting bracket to wall/mounting point.

Fix Solar panel to mounting bracket.

i.

ii.

Attaching Mounting Bracket to Window Frame

6 | Automate™ Programming Instructions | MTSOLPAN-B ROLLEASE ACMEDA

2 DIMENSIONS

SPECIFICATION TABLE

Parameters Value

Power output

(Under 1 SUN - 1000W/m²)W 2.3±0.2

Max Average Voltage output V 12.3±0.1

Max Average Current mA 190±20

Minimum Lux value to start output KLux 10±5

408mm (16.063 in)

L = 150 10mm (5.91 0.39in)

Dim L = Length of cordbetween PV panel and

connector

20mm (0.797 in)

44mm (1.732 in)

72mm (2.837 in)

375mm (14.769 in)

75mm (2.953 in)

62mm (2.441 in)

54mm(2.126 in)

2x 3.60 (0.142 in)

408mm (16.063 in)

L = 150 10mm (5.91 0.39in)

Dim L = Length of cordbetween PV panel and

connector

20mm (0.797 in)

44mm (1.732 in)

72mm (2.837 in)

375mm (14.769 in)

75mm (2.953 in)

62mm (2.441 in)

54mm(2.126 in)

2x 3.60 (0.142 in)

408mm (16.063 in)

L = 150 10mm (5.91 0.39in)

Dim L = Length of cordbetween PV panel and

connector

20mm (0.797 in)

44mm (1.732 in)

72mm (2.837 in)

375mm (14.769 in)

75mm (2.953 in)

62mm (2.441 in)

54mm(2.126 in)

2x 3.60 (0.142 in)

AC RANGEAUTOMATE ™ AC MOTORS

• Quiet operation

• Simple limit setting and adjustment

• "Slim Head" design minimizes light gap

• Leveling control

• Favorite position

• 2 way RF communication

• ARC™ protocol featuring efficient programming and bi-directional communication

ACML

ACRF

Leading innovator of precision hardware and automated shade solutions.USA | AUSTRALIA | EUROPE rolleaseacmeda.com

© Rollease Acmeda Pty Ltd 2016 V1

AUTOMATE | ACRF Q6Part #: MTACQRF35 - 6

Description: Quiet AC Tubular motor with RF control.

• Recommended max shade size 120”x120”

• Leveling Control

• Simple limit setting and adjustment

• Favorite position

• 2-way RF communication

• New ARC protocol for simple programming

• “Slim Head” design minimizes light gap

• Quiet operation

FEATURES TECHNOLOGIES

DIMENSIONS

SPECIFICATIONS

433 MHZBI-DIRECTIONAL

LEVELING CONTROL

ELECTRONIC LIMIT

FAVORITE POSITION

QUIET OPERATION

Voltage 110-120 A/C IP Rating IP44

Torque 6.0Nm Limit Switch Type Electronic

Max Run Time 4 Min Amps 0.85A

Speed 24 RPM Temp Working Range 32°F to 140°F (0°C to 60°C)

Radio Frequency 433.92 MHz Insulation Class III

RF Modulation FSK Sound Level ~42DB

USA | AUSTRALIA | EUROPE

rolleaseacmeda.com

© Rollease Acmeda Group

AUTOMATE™ AC RANGE

FEATURES

APPLICATIONS

Electronic Limit Switch

Favorite Position

Leveling Control

Quiet Operation

SPECIFICATIONS

433MHz Bi-directional

Roman Shades

Wood Blind**Lift and tilt operation ACRF 6 & Q6 only

Roller Shade

Voltage Torque Speed Motor Length

ACRF 6 110-120 6.0Nm 33rpm 22.78"

ACRF Q6 110-120 6.0Nm 24rpm 21.18"

ACRF Q10 110-120 10.0Nm 21rpm 29.67"

ACRF 15 110-120 15Nm 32rpm 25.74"

ACML 6 110-120 6.0Nm 33rpm 20.04"

ACML Q6 110-120 6.0Nm 24rpm 22.01"

ACML Q10 110-120 10.0Nm 21rpm 27.70"

ACML 20 110-120 20.0Nm 32rpm 24.74"

AUTOMATE | E ARC TUBULAR AC MOTOR

433 MHZ BI-DIRECTIONAL

ELECTRONIC LIMIT

QUIET OPERATION

FAVORITE POSITION LEVEL CONTROL

FEATURES:

• Electronic Limits

• A/C Line Voltage (available for both 100V-120V & 220V-240V applications)

• 433 MHz Bi-Directional RF Communication

• Leveling Control

•Favorite Position

• Roller & Tilt Modes

• “Slim Head” design Reduces Light Gaps

• Quiet Operation

AUTOMATE | E tubular AC motors combine the simple, intuitive features of ARC “Automate Radio Communication” with the higher lifting capacity of an AC motor for larger shade applications.

Leveling Control allows for precise positioning of individual or multiple shades ensuring perfect alignment every time whilst bi-directional communication ensures you can always keep track of your shades position when integrated into smart home applications.

INST

R. M

TAC

RF_

Aut

omat

e_AC

V1.

0 D

EC 2

016

73

36

A6.50 ±0.394

165 ±10[118.11 1.181]

B 3000 30

C0.399.80

D0.59

15

A

E21.19538.10

F0.35

9

G 35

NOTE: Refer to Compliance Label MTACQRF35-6_CLZ

H 2x 0.123.10

I1.1429

J0.153.90

DETAIL ASCALE 5 : 1

REV. DESCRIPTION DRAWN DATE

01 Drawing created S. Petrie 28/11/2016

73

36

C 2016 ROLLEASE ACMEDA

TOLERANCE:0 < 20 0.1020 < 40 0.2040 < 100 0.30(UNLESS OTHERWISE SPECIFIED)

DIMENSIONS IN MILLIMETERS DWG 1 OF 1

SCALE:1:2DO NOT SCALE

MATERIAL:

MTACQRF35-6MTACQRF35-6

-28.11.16

UNSPECIFIED RADIUS: 0.5mm

TITLE:

PART NUMBER:

DRAWING NUMBER:

FINISH:

COLOUR:

WEIGHT:

35mm Quiet ACRF Motor, 6Nm/24r

REV.

SIZE:

01

S. Petrie

-See Table A3

W. ZhuA. Guerra

01.12.1605.12.16

MOTOR SPECIFICATIONS

TORQUE:SPEED:MAX CONTINUOUSRUN TIME:

SUPPLY VOLTAGE:CURRENT:POWER:BATTERY:SOUND LEVEL:

WEIGHT:

RADIO FREQUENCY:RADIO DISTANCE OFOPERATION:

TEMP WORKING RANGE:

RF PROTOCOL:

IP CODE:LIMIT SWITCH TYPE:LIMIT RANGE:INSULATION CLASS:

NmRPM

A

Min

WmAHdBKg

MHzm

CF

lbs

ft

Turns

PROPRIETARY & CONFIDENTIALTHE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF ROLLEASE ACMEDA. ANY REPRODUCTION IN PART OR WHOLE WITHOUT THE WRITTEN PERMISSION OF ROLLEASE ACMEDA IS PROHIBITED.

APPROVED:

CHECKED:

DRAWN:

246

120 VAC / 60 Hz0.85102-531.463.21433.9240131.2320-6032-140

FSKIP44Electronic∞I

4

POWER SOURCE: AC Mains

RF MODULATION:ARC

6 | Automate Programming Instructions | AC Tubular Motors ROLLEASE ACMEDA

2 WIRING

2.1 Power options

Ensure cable is kept clear of fabric.

Ensure antenna is kept straight and away from metal objects.

Cut off the mains power supply

Connect the motor according to the information in the table below.

Range Neutral Live Earth

220-240V Blue Brown Yellow / Green

100-120V White Black Green

123

3 x 1,5 mm2

Power Off

3 x 0.75 mm2

Power o�

123

AC

1

23

3×0.75mm² 240V/50Hz

220 - 240V/50Hzaccording to product nameplate

1

2

3

Blue = Neutral

Brown = Direction

Green/Yellow = Earth

7 | Automate Programming Instructions | AC Tubular Motors ROLLEASE ACMEDA

P1 Press Condition Function Achieved Visual Feedback

Audible Feedback

Function Described

Short Press

If limit is NOT set

None No Action None No Action

If limits are set

Operational control of motor, run to limit.

Stop if running

Motor runs

None

Operational control of motor after pairing

and limit setting is completed first time

If motor is in “Sleep Mode” &

limits are set

Wake and control

Motor wakes and runs in a

direction

None

Motor is restored from Sleep Mode and RF

control is active

3.1 Motor state test

3 P1 BUTTON FUNCTIONS

Hold P1 P1Activate Pairing Mode

Sleep Mode

Reverse Direction

Reset To Factory Settings

Motor Response

Motor Response

Motor Response

Motor Response

Approx.

Approx.

Approx.

Approx.

NOTE

Reverse motor direction from P1 button only when motor does not have any limits.

This table describes the function of a short P1 button press/release (<2 seconds) depending on current motor configuration.

The P1 Button is utilized to administer motor configuration as described below and beginning in Section

rolleaseacmeda.com © 2017 Rollease Acmeda Group

ABOUT THE “AUTOMATE SHADES” SKILLYour Automate Shades just got smarter. Amazon Alexa works with Automate Pulse to take control of your shades with your voice. All you need is a Automate Pulse Hub that’s already setup, then you can add the Automate Shades Skill to your Amazon Alexa. This allows you to control individual or groups of shades with precision.

GETTING STARTEDBefore connecting Alexa to your Automate Pulse hub, please ensure the Pulse hub and Shades are working. In order to control your Shades with your voice you will need the following:

� Automate Pulse Hub already setup and working

� Automate Pulse App and account

� Working Shades with your Pulse app

� Alexa App and account

CONTROLLING YOUR AUTOMATE SHADES THROUGH AMAZON ALEXATo create a seamless experience to handsfree voice activation, consider the natural way you and your family would call a shade on your Amazon Alexa. You may want to consider changing the name from Shade 1 to Living room Shade in your Automate Pulse app. Also consider if the shade will be controlled individually or in a group and name it accordingly in the pulse app.

ALEXA - SHADE ON/OFFAlexa currently treats shades as if they were lights, so Alexa will respond to turn on or turn off Living room shade.

Example commands;

� To lower an individual shade, simply say “Alexa, turn on Bedroom Shade”

� To raise an individual shade, simply say “Alexa, turn off Bedroom Shade”

SCENE CONTROLScene Control is different to Group Control; a scene can be multiple shades set to different positions. If you plan to trigger scenes through Alexa, consider what the most meaningful, easy to remember scene names. For instance, a scene named “Good Morning” is easy to remember and accurately describes the experience one might look for in that scene. Then remember to configure that scene in your Pulse app.

� To activate a scene created in the Pulse app, simply say “Alexa, turn on Good Morning”

Note: Scenes can only be created in the Automate Pulse app not in Alexa app.

GROUP CONTROLAnother method of operating window shades through Alexa is through groups. These groups are often individual rooms, multiple room groupings, or a whole home. Please be aware that the rooms that you have programmed into your Pulse app will not automatically show up in your Amazon Alexa app. You will be required to recreate the groupings in your Amazon Alexa app. Once that group has been created in Amazon Alexa, triggering it to operate, is as simple as asking Alexa to turn on that group.

� To lower a group of shades configured in the Alexa App, simply say “Alexa, turn on Living Room”

PERCENTAGE CONTROLAn individual window shade or group can be sent to any percentage of openness. The percentage will be based on what the programmed limits are on the motor. A shade that is completely raised to its upper limit is at 0%, while a shade that is completely lowered to its lower limit is at 100%.

� To move an individual shade only a little down, simply say “Alexa, set Bedroom Shade to 22%”

TIPS � Alexa responds to names created in the Automate Pulse app. Consider using “one” when numbering shades instead of “1”.

Avoid using all special characters like % and numbers.

� If you have changed the name of your shade or scene in your Pulse app, please ensure you force close the Automate Pulse app,then reopen the Pulse app. Only then can you rediscover the devices and scenes in your Alexa app.

QUICK START GUIDE - AMAZON ALEXAYOUR AUTOMATE SHADES SKILL

Free app for iOS and andriod.

AUTOMATE PULSEWi-Fi HUB

SERIAL INTERFACE

REMOTE FREE SETUP

SCENES

433 MHZBI-DIRECTIONAL

TIMERS

MANAGE LOCATIONS

REMOTE ACCESS

SETUP WIZARD

MANAGE ROOMS

Accounts per Hub 5 (1 Admin & 4 Guests)

Locations per account 5

Devices per Hub 30

Hubs per location 5

Rooms per location 20

Scenes per location 20

Timers per location 20

78mm (3.07”)

78mm (3.07”)

24mm (0.93”)

78mm (3.07”)

78mm (3.07”)

24mm (0.93”)

AUSTRALIA | USA | EUROPE

rolleaseacmeda.com

© 2016 Rollease Acmeda Pty Ltd

AUTOMATE PULSE

DIMENSIONSSPECIFICATIONS

SMART HOME TECHNOLOGYCAPABILITIES

Installation Desktop or wall-mounted

Power Input 5VDC/1A

Rated Current 500mA

Rated Power <2.5W

Standby Power ≤300mA

Wi-Fi Network 802.11 b/g/n - 2.4GHz

Device Control Frequency 433MHz

Radio Coverage 30m for device control (indoors)

Protection Class IP20

Antenna Built-in

Working Temperature -10° to 45°

Storage Temperature -20° to 55°SETTINGBUTTON

RS485 SERIAL INTERFACE

MICRO USB5V DC / 1A

FACTORYRESET

AUTOMATEINTERNAL SUN SENSOR

• Improve home comfort levels by automating the operation of motorised internal shades.

• The Internal Sunlight Sensor will open or close internal shades in response to changes in sunlight levels.

• 3 modes to control your blinds.

• 4 light sensitivity levels.

• Easy to install with a reusable peel and stick adhesive pad.

• Easily pairs to any number of ARC motors with the press of a button.

• Automatically operates motors within range of the sensor to activate them simultaneously.

• Built in over-ride switch to open shades.

rolleaseacmeda.com

USA | AUSTRALIA | EUROPE © 2016 Rollease Acmeda Group

INTERNAL SUN SENSOR

433 MHz

APPLICATIONS

Internal Shades

External Shades

Part Number MTRF-SUNSENS

Voltage 3V Coin Cell Battery

Frequency 433.92 MHz

Ambient Operating Temperature -20˚- 60˚C

Standby Current Less than 5uA

Working Current Less than 12 mA

FEATURES

DIMENSIONS SPECIFICATIONS

LIGHT LEVEL SETTINGS

1.69 in. (43mm)

0.61 in. (15mm)

0 Level Not operational

1 Level 15kLUX

2 Level 30kLUX

3 Level 45kLUX

4 Level 60kLUX

RollEase Distribution Center 320 Expo BoulevardLenoir, NC 28645 USA

RollEase West 7310 West Roosevelt Street, Suite 26Phoenix, AZ 85043 USAOffice: 623.936.5818 Order Fax: 623.936.5294

RollEase Headquarters200 Harvard Avenue Stamford, CT 06902-6320 USAOffice: 203.964.1573 / 800.552.5100Fax: 203.964.0513 Order Fax: 203.358.5865www.rollease.com

©2012 RollEase, Inc. / Rev: July, 2013

Skyline 3” & 4” Fascia Installation

Attaching 3 inch Fascia1.) Fascia may be cut to the dimension “A” as determined on formula on page SL-20, no deductions are required to accommodate brackets.2.) Hook the fascia on the top of bracket first, and rotate downward. Press until the bottom hooked feature on the fascia engages and is locked to the tabs of the bracket.

Tabs

PLEASING AESTHETICS Uniquely designed to have a soft fabric appearance and feel

COLOR AVAILABILITY Select from 8 popular colors to complement any room’s décor

WHITE BACKING Provides a uniform color to the exterior, increasing visual appeal

ACRYLIC FOAM COATING Blackout has bounce back quality for better tracking on roll

TWO ROLL WIDTHS Available in 98.4” and 118” roll widths to fit most large windows

FLAME RETARDANT Certified for NFPA No. 701, California Title-19, CAN/ULC-S109

LIFETIME LIMITED WARRANTY SierraSol is manufactured for enhanced sustainability from the best available resources

VERSATILE Can be used on roller shades, Roman shades, or panel tracks

ENERGY SAVINGS & COMFORT Reduces solar heat gain and glare resulting in increased energy savings and comfort

CUT YARDAGE Conveniently order cut yardage (3 yard min.) in all colors and roll widths to make smaller jobs cost-effective

Mesa is shown above in the Slate color to accent the room’s wall color and furnishings

Mesa blackout fabric is ideal for a variety of applications

require total light blockage and privacy. Made from

100% polyester with an acrylic coating, Mesa is PVC-free, offering a high-quality, soft appearance that will add beauty to a room while reducing glare and solar heat gain.

Mesa comes in 8 popular colors to complement any décor

and can be used for an array of window coverings including roller

shades, Roman shades, or panel tracks. Mesa features

a white backing to create a uniform appearance from

the exterior.

F E A T U R E S A N D B E N E F I T S

M E S AE X C L U S I V E L Y F R O M R O L L E A S E A C M E D A

B L A C K O U T F A B R I CSierraSo l

M E S AE X C L U S I V E L Y F R O M R O L L E A S E A C M E D A

B L A C K O U T F A B R I CSierraSo l

DOVE WHITE WHITE PEARL

LATTE SEAL COCOA

SLATE BLACK

COMPOSITION 100% POLYESTER WITH ACRYLIC FOAM BACKING

STANDARD ROLL WIDTHS 98.4” (2.5 M), 118” (3.0 M)

STANDARD ROLL LENGTH 33 YD (30 M)

OPENNESS FACTOR 0% BLACKOUT

WEIGHT 9.43 OZ/YD2 (320 G/M2) +/- 5%

THICKNESS 0.021" (0.55 MM) +/- 5%

YARN COUNT WARP/53 WEFT/31 (ENDS/IN)

COLORFASTNESS TO LIGHT GRADE 6-7 ISO-105-B02

TENSILE STRENGTH WARP 180, WEFT 202 daN/5CM

TEARING STRENGTH WARP 8.5, WEFT 7.85 daN

FLAME RETARDANT NFPA 701 • CALIF. TITLE-19 • CAN. ULC-S109

ENVIRONMENTAL PVC-FREE • LEAD-FREE

FUNGAL RESISTANCE ASTM G21

MOLD PROTECTION MOLD AND MILDEW PROTECTIVE COATING

LOW VOC EMISSION RATE <0.004 MG/M2/HR ASTM D5116

WARRANTY LIFETIME LIMITED

CLEANING WIPE CLEAN WITH WARM SOAPY WATER & DAMP CLOTH

S P E C I F I C A T I O N S

Note: Custom color matching available. Contact RollEase for minimums and pricing

Mesa shown above in Cocoa color

C O L O R S

Rollease Acmeda200 Harvard AvenueStamford, CT 06902Phone: 203-964-1573 • 800-552-5100 Order Fax: 203-358-5865

OPENNESS FACTOR 0%

UV BLOCKAGE 100%

Style Color Ts Rs As Tv 1∕8”CL ¼”CL ¼”H.A. 1∕8”CL ¼”CL ¼”H.A.

Mesa White* 0 76 24 0 0.22 0.23 0.26 0.19 0.20 0.23

Ts = Solar Transmittance 1∕8”CL = 1∕8” Clear Glass

Rs = Solar Reflectance ¼”CL = ¼” Clear Glass

As = Solar Absorption ¼”H.A. = ¼” Heat Absorbing Glass

Tv = Visual Transmittance

FABRICATION METHODS: CUTTING; COLD, ULTRASONIC, CRUSH, OR LASER. SEAMING; THERMAL, HIGH FREQUENCY, ULTRASONIC, OR SEWING. RAILROADING (TURNING WIDTH FOR LENGTH) IS NOT RECOMMENDED.

THIS FABRIC IS SUITABLE FOR ROLLER SHADES, ROMAN SHADES, AND PANEL TRACKS. INTERIOR USE ONLY.

FOR SWATCH SAMPLES, CONTACT ROLLEASE CUSTOMER SERVICE 800-552-5100, FAX 203-358-5865

COLORS MAY VARY FROM SWATCH SAMPLES. ALL VARIATIONS ARE WITHIN

INDUSTRY STANDARDS. PLEASE CHECK THE COLOR BEFORE CUTTING.

F E N E S T R A T I O N P R O P E R T I E S

*Similar fenestration data achieved for all other colors.

SHADING COEFFICIENT (SC) HEAT GAIN (G-Value)

Leading innovator of precision hardware and automated shade solutions.USA | AUSTRALIA | EUROPE rolleaseacmeda.com

© Rollease Acmeda Inc

Leading innovator of precision hardware and automated shade solutions.USA | AUSTRALIA | EUROPE rolleaseacmeda.com

© Rollease Acmeda Inc

CA TITLE 19

Leading innovator of precision hardware and automated shade solutions.USA | AUSTRALIA | EUROPE rolleaseacmeda.com

© Rollease Acmeda Inc

NFPA 701

Leading innovator of precision hardware and automated shade solutions.USA | AUSTRALIA | EUROPE rolleaseacmeda.com

© Rollease Acmeda Inc

ASTM G21-09

Material Safety Data Sheet

1. PRODUCT IDENTIFICATION

Product name: FR Foam Coating Fabric

2. COMPOSITION/INFORMATION ON INGREDIENTS

Chemical Name CAS No. (Priority) Composition

(in % by weight)

1. Polyester Fabric 40%-60%

2. Acrylate polymer 20%-30%

3. Titanium dioxide 1317-80-2 10%-25%

4. Clay 1340-68-7 0.1%-15%

5 Ammonium stearate 1002-89-7 0.1%-5%

6. Antimony trioxide 1309-64-4 2%-20%

7. 1,2-Bis(pentabromophenyl) ethane 84853-53-9 0.5%-5%

This product is a solid. This product does not contain any substances presenting a health or environmental hazard.

3. HAZARDS IDENTIFICATION

Not classified as hazardous according to regulatory criteria.

4. FIRST AID MEASURES

Inhalation: No hazardous.

Skin contact: No hazardous. Pay attention to the sharp edge to avoid physical injury.

Eye contact: No hazardous. Pay attention to the sharp edge to avoid physical injury.

Ingestion: Consult a physician if necessary. Never give anything by mouth to an unconscious person.

5. FIRE-FIGHTING MEASURES

Thermal decomposition

Thermal decomposition may yield acrylic monomers.

Suitable extinguishing media:

Use extinguishing media appropriate for surrounding fire.

Specific hazards during fire fighting: Product has fire retardant property, however, it can burn after long time exposure to fire or high temperature environment.

Special protective equipment for fire-fighters: Wear self-contained breathing apparatus and protective suit.

6. ACCIDENTAL RELEASE MEASURES

No any chemical hazardous. Be careful of the physical injury.

Personal precautions Keep people away from the dropping goods in order to avoid hit.

Environmental precautions CAUTION: Repack the product. Keep environment clean and tidy.

Methods for cleaning up Repackage the product. Do not leave any rubbish in republic place.

7. HANDLING AND STORAGE

Handling Avoid hit and physical injury while handling the product. Handle it carefully.

Storage Storage temperature: -15 - 40 °C. Avoid storing at high humidity environment. Very low temperature and high temperature may affect the product property.

8. EXPOSURE CONTROLS / PERSONAL PROTECTION

Exposure limit(s) Exposure limits are listed below, if they exist. Exposure controls

Eye protection: No hazardous.

Hand protection: No hazardous.

Respiratory protection: No need.

Protective measures: No specific requirement.

Engineering measures: No specific requirement.

9. PHYSICAL AND CHEMICAL PROPERTIES

Physical state Solid

Colour White to black

Odour non

pH not applicable

Boiling point/range not applicable

Melting point/range not applicable

Flash point Noncombustible

Lower explosion limit not applicable

Upper explosion limit not applicable

Vapour pressure not applicable

Relative vapour density not applicable

Water solubility Insoluble

Relative density not applicable

Evaporation rate not applicable

Percent volatility 0

NOTE: The physical data presented above are typical values and should not be construed as a specification.

10. STABILITY AND REACTIVITY

Hazardous reactions Stable

Materials to avoid There are no known materials which are incompatible with this product.

polymerization Product will not undergo polymerization.

11. TOXICOLOGICAL INFORMATION

No data are available for this material. The information shown is based on profiles of compositionally similar materials. Acute oral toxicity No data

Acute dermal toxicity

No data

Skin irritation

No hazardous..

Eye irritation

rabbit No eye irritation

12. ECOLOGICAL INFORMATION

The Environmental Toxicity data are for a compositionally similar material.

Elimination information (persistence and degradability)

Biodegradability No data are available for this material. The information shown is based on profiles of compositionally similar materials. Inherent Biodegradability (OECD 302 B): This type of product is not biodegradable but readily bio-eliminable. Activated Sludge Respiratory Inhibition (OECD 209): >100 mg/l (non- inhibiting)

Ecotoxicity effects

Toxicity to fish not applicable Toxicity to algae not applicable Toxicity to bacteria not applicable Toxicity to aquatic invertebrates

not applicable not applicable

13. DISPOSAL CONSIDERATIONS

Environmental precautions: CAUTION: No chemical hazardous to environment. But pls keep environment clean and tidy.

Disposal For disposal, incinerate or landfill at a permitted facility in accordance with local, state, and federal regulations.

14. TRANSPORT INFORMATION

Classification for ROAD and Rail transport: Not regulated (Not dangerous for transport)

Classification for SEA transport (IMO-IMDG): Not regulated (Not dangerous for transport)

Classification for AIR transport (IATA/ICAO): Not regulated (Not dangerous for transport)

Transportation classifications may vary by container volume and may be influenced by

regional or country variations in regulations

15. REGULATORY INFORMATION Label Classification and labeling have been performed according to regulations.

Not classified as hazardous according to regulatory criteria.

China. Inventory of Existing Chemical Substances (CHINA) All intentional components are listed on the inventory, are exempt, or are supplier certified.

US. Toxic Substances Control Act (TSCA) All components of this product are in compliance with the inventory listing requirements of the U.S. Toxic Substances Control Act (TSCA) Chemical Substance Inventory.

16. OTHER INFORMATION

The information provided in this Material Safety Data Sheet is correct to the best of our knowledge, information and belief at the date of its publication. The information given is designed only as a guidance for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered a warranty or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process, unless specified in the text.

Version: 1.0

Revision date: 16.02.2016 Print Date: 16.02.2016

CLEANINGI N S T R U C T I O N S

Alkenz SunShadow

Remove dust with a vacuum cleaner or compressed air. Clean with a sponge and warm soapy water using mild detergent. Rinse with clean water. Do not scrub. Do not use solvents or abrasives that could harm the coating of the fabric. Leave the blind down until completely dry. You may also very gently rub the fabric with a clean white pencil eraser to remove small stains.

Almedahls Designer Fabrics

Do not soak. Clean by gently wiping with a sponge and warm soapy water. Remove dust with vacuum cleaner or compressed air. Do not scrub. Do not use solvents or abrasives. Leave the blind down until completely dry.

SierraSol Blackout Fabrics

Vacuum cleaning and/or gentle wiping with a damp sponge and gentle detergent. Do not soak, do not use any solvents, and do not rub. Leave the blind down until completely dry.

Verosol Metalized Fabrics

Dust can be removed with a soft feather duster or cloth or by vacuum with a soft brush at the lowest setting. When deeper cleaning is needed, the colored side can be cleaned with a damp cloth. Avoid harsh cleansers and abrasives.

RolleaseAcmeda and LEED

LEED, or Leadership in Energy and Environmental Design, is the most widely used green building rating system in the world. Available for virtually all building, community and home project types, LEED provides a framework to create healthy, highly efficient and cost-saving green buildings. LEED certification is a globally recognized symbol of sustainability achievement. RolleaseAcmeda, andour fabric partners, can help you towards obtaining credits for your LEEDcertified project. Below are areas where credits may be possible, or wherewe might be able to provide needed information for your project.

Sustainable Sites Credit

The intent of this credit is to To increase night sky access, improve nighttime visibility, and reduce the consequences of development for wildlife and people.

(Choosing fabrics that reduce exterior glare and adding Automate motor controls can help you satisfy both components of this credit.)

Light Pollution Reduction (1 point possible)

Environmental Quality Credit

For more information go to https://www.usgbc.org/node/2600382?return=/credits/new-construction/v4/sustainable-sites

Daylight (3 points possible)

The intent of this credit is to connect building occupants with the outdoors, reinforce circadian rhythms, and reduce the use of electrical lighting by introducing daylight into the space.

(RolleaseAcmeda can help you choose fabrics that will maximize your view to the outdoors,while minimizing glare, for optimal worker productivity and building efficiency.)

For more information got to https://www.usgbc.org/node/2614118?return=/credits/new-construction/v4/indoor-environmental-quality

Acoustic Performance (1 point possible)

The intent of this credit is to provide work spaces and classrooms that promote occupants’ well-being, productivity, and communications through effective acoustic design.

(RolleaseAcmeda can assist you by providing the acoustic properties of all our fabrics.)

For more information go to https://www.usgbc.org/node/2614139?return=/credits/new-construction/v4/indoor-environmental-quality

Thermal Comfort (1 point possible)

Environmental Quality Credit (Continued)

The intent of this credit is to promote occupants’ productivity, comfort, and well-being by providing quality thermal comfort.

(RolleaseAcmeda has many fabric options that reduce solar heat gain while improving a windows R-value.)

For more information go to https://www.usgbc.org/node/2612656?return=/credits/new-construction/v4/indoor-environmental-quality

Low Emitting Materials (3 points possible)

The intent of this credit is to reduce concentrations of chemical contaminants that can damage air quality, human health, productivity, and the environment.

(RolleaseAcmeda has many fabric options that are Greenguard certified.)

For more information go to https://www.usgbc.org/node/2614095?return=/credits/new-construction/v4/indoor-environmental-quality

Energy and Atmosphere Credit

Optimize Energy Performance (18 points possible)

The intent of this credit is to achieve increasing levels of energy performance beyond the prerequisite standard to reduce environmental and economic harms associated with excessive energy use.

(RolleaseAcmeda has many fabric options that reduce solar heat gain while improving a windows R-value.)

For more information go to https://www.usgbc.org/node/2614273?return=/credits/new-construction/v4/energy-%26amp%3B-atmosphere

Materials and Resources Credit

Building Product Disclosure and Optimization - sourcing of raw materials (2 points possible)

The intent of this credit is to encourage the use of products and materials for which life cycle information is available and that have environmentally, economically, and socially preferable life cycle impacts. To reward project teams for selecting products verified to have been extracted or sourced in a responsible manner.

(RolleaseAcmeda clutches and fabrics meet the criteria for recycled content. A statement is available.)

RolleaseAcmeda is committed to supplying products that are made using environmentally concious processes, create satifying and productive workspaces, and reduce harm to the environment once the life of the product has expired.

For more information go to https://www.usgbc.org/node/2616388?return=/credits/new-construction/v4/material-%26amp%3B-resources

Rollease Acmeda and LEED LEED, or Leadership in Energy and Environmental Design, is the most widely used green building rating system in the world. Available for virtually all building, community and home project types, LEED provides a framework to create healthy, highly efficient and cost-saving green buildings. LEED certification is a globally recognized symbol of sustainability achievement. Rollease Acmeda, and our fabric partners, can help you towards obtaining credits for your LEED certified project. Below are areas where credits may be possible, or where we might be able to provide needed information for your project.

Sustainable Sites Credit Light Pollution Reduction (1 point possible) The intent of this credit is to increase night sky access, improve nighttime visibility, and reduce the consequences of development for wildlife and people. (Choosing fabrics that reduce exterior glare and adding Automate motor controls can help you satisfy both components of this credit.) For more information go to https://www.usgbc.org/node/2600382?return=/credits/new-construction/v4/sustainable-sites

Environmental Quality Credit Daylight (3 points possible) The intent of this credit is to connect building occupants with the outdoors, reinforce circadian rhythms, and reduce the use of electrical lighting by introducing daylight into the space. (Rollease Acmeda can help you choose fabrics that will maximize your view to the outdoors, while minimizing glare, for optimal worker productivity and building efficiency.) For more information got to https://www.usgbc.org/node/2614118?return=/credits/new-construction/v4/indoor-environmental-quality Acoustic Performance (1 point possible) The intent of this credit is to provide work spaces and classrooms that promote occupants’ well-being, productivity, and communications through effective acoustic design. (RolleaseAcmeda can assist you by providing the acoustic properties of all our fabrics.) For more information go to https://www.usgbc.org/node/2614139?return=/credits/new-construction/v4/indoor-environmental-quality Thermal Comfort (1 point possible) The intent of this credit is to promote occupants’ productivity, comfort, and well-being by providing quality thermal comfort. (RolleaseAcmeda has many fabric options that reduce solar heat gain while improving a windows R-value.) For more information go to https://www.usgbc.org/node/2612656?return=/credits/new-construction/v4/indoor-environmental-quality Low Emitting Materials (3 points possible) The intent of this credit is to reduce concentrations of chemical contaminants that can damage air quality, human health, productivity, and the environment. (Rollease Acmeda has many fabric options that are Greenguard certified.) For more information go to https://www.usgbc.org/node/2614095?return=/credits/new-construction/v4/indoor-environmental-quality

Energy and Atmosphere Credit Optimize Energy Performance (18 points possible) The intent of this credit is to achieve increasing levels of energy performance beyond the prerequisite standard to reduce environmental and economic harms associated with excessive energy use. (Rollease Acmeda has many fabric options that reduce solar heat gain while improving a windows R-value.) For more information go to https://www.usgbc.org/node/2614273?return=/credits/new-construction/v4/energy-%26amp%3B-atmosphere

Materials and Resources Credit Building Product Disclosure and Optimization - sourcing of raw materials (2 points possible) The intent of this credit is to encourage the use of products and materials for which life cycle information is available and that have environmentally, economically, and socially preferable life cycle impacts. To reward project teams for selecting products verified to have been extracted or sourced in a responsible manner. (Rollease Acmeda clutches and fabrics meet the criteria for recycled content. A statement is available.) Rollease Acmeda is committed to supplying products that are made using environmentally conscious processes, create satisfying and productive workspaces, and reduce harm to the environment once the life of the product has expired. For more information go to https://www.usgbc.org/node/2616388?return=/credits/new-construction/v4/material-%26amp%3B-resources

Green Product Data Window coverings reduce glare and control light coming into indoor environments. Products made with Rollease Acmeda components and fabrics have additional green qualities. Our clutches 25% of the plastic material in our clutches is recycled material. Of the 25% recycled content, 100% is post-industrial and 0% is post-consumer. Tube and other extruded products 90% by weight of all extrusions is recycled material. Of the 90% recycled content, approximately 75% is post-industrial and 25% is post-consumer. Our fabric collections Solar Shades made with Alkenz SunShadow fabrics have openness factors ranging from 1-15% open. Blackout Solar Shades made with SierraSol fabrics have an openness factor of 0%, offering 100% UV blockage. Blocking UV rays reduces heat transmittance while reducing glare and protecting furnishings from sun damage. Alkenz SunShadow fabrics are GREENGUARD® certified as they have met the organization’s standard for low chemical and particulate emissions for indoor use. The Almedahls Daylight Control fabric collection is beautiful as well as environmentally friendly. Almedahls fabrics aim for environmental responsibility by controlling raw materials and chemical components during the production process. Fabrics are produced without chemicals using APEO or azo-dyestuffs. Hydrogen peroxide, instead of chlorine, is used in the bleaching process. As minimizing energy consumption and recycling water are ways of protecting our planet, Almedahls is committed to giving priority to suppliers that live up to demands for environmental consciousness. The Almedahls ECO collection has fabric from organic cotton grown in the United States, two fabrics made from 100% recycled polyester and another from PLA – made of naturally biodegradable corn, one of the first greenhouse-gas neutral polymers in the world. Verosol’s metallized fabrics eliminate glare issues in your building while also providing an easy to manage indoor climate with a reduced need for heating and cooling. The highly reflective metallized backing provides effective insulation to windows, significantly reducing heat loss in winter and heat gain in summer. The selective use of quality materials combined with Verosol’s expertise in metallization ensures the best insulation for your building through all seasons of the year. This leads to significant savings in energy costs and reduced CO² emissions. Most Verosol fabrics even contribute positively towards sustainable building models such as LEED (USA) certification, Green Star (Australia) and Breeam (United Kingdom).

www.shadesbymatiss.com | T. 800 493 2040 Fax 800 414 1042 | email: info@shadesbymatiss.com74 |

Shades by Matisscustom shading solutions

MATISS, INC. LIMITED LIFETIME WARRANTYMatiss, Inc warrants to the original purchasers of its products, upon the terms of this limited warranty, that its products will be free from defects in materials and workmanship for the reasonable lifetime, for so long as the original purchaser owns the product, provided that such products were installed, used and maintained according to Matiss, Inc written instructions; no salesperson, dealer, retailer nor anyrepresentative of Matiss, Inc has the authority to modify this limited warranty in any way, either verbally or in writing.

Fabrics are warranted from the date of purchase by the original purchaser for 5 (five) years.

Motorized products and motor control systems are warranted for a period of 5 (five) years from the date of purchase by original purchaser.

This warranty shall remain in effect only if Matiss, Inc product has been installed by an authorized dealer, and maintained, cleaned, treated and used correctly. This warranty does not cover any conditions resulting from accidents, alterations, normal wear and tear, improper installation, misuse or abuse, exposure to heat and humidity, fading or discoloration over time. All moving parts, such as cords, will eventually wear out and fabric may fray. We consider these things as normal wear and tear.

Matiss, Inc. shall repair or replace, in its sole discretion, the product or components found to be defective. Matiss, Inc. shall not be responsible for shipping charges or labor costs incurred for measuring, demounting or installation. Repairs will be made with like or similar parts. Colors may vary from lot to lot and may not exactly match sample swatch, sample book or previous purchases. Discontinued components or color selections will be replaced with the closest equivalent current components. This shall be your sole remedy under this limited warranty.

Warranty Limitations:

(a) This warranty is exclusive and in lieu of all other obligations, liabilities or warranties. Matiss, Inc disclaims all other warranties, whether express, implied or statutory, including any warranty of merchantability, any warranty of fitness for a particular purpose or otherwise.

(b) In no event shall manufacturer be liable for loss of profits, indirect, special or consequential damages arising out of any product covered by this limited warranty, or incidental damages, including without limitation loss of use, loss of time or inconvenience, or expenses such as telephone, towing, crane, lift charges and haul out charges.

(c) In no event shall manufacturer’s liability hereunder exceed the cost of the product.

(d) Some states do not allow the exclusion or limitation of consequential or incidental damages, so this exclusion or limitation may not apply to you.

To obtain warranty service, contact the dealer from whom you purchased the product. Warranty claims must be accompanied by proof of purchase. Products ordered outside of the recommended manufacturing specifications (oversized blinds, out of specs units, specialty units etc.) are not covered by this warranty.

All inquiries related to this warranty should be addressed to your sales representative.

DRAFT

Shad

es b

y Mat

iss

About Rollease Acmeda

From clutches to headrails, motors to fabric, Rollease Acmeda has you covered. As your trusted partner in window covering products, Rollease Acmeda is pleased to offer the Alkenz Product Line, Sunshadow and Versorol Silver-Screen and extend one more reason to make Rollease Acmeda the source for your window covering needs.

Founded in 1980, Rollease Acmeda is the essential source of innovative and high quality products and services for the window covering industry worldwide. Rollease Acmeda works directly with OEM’s, fabricators, workrooms, contrac-tors, designers, architects, and retailers to effectively meet the needs of all market segments.

When you specify or use Rollease Acmeda systems, you provide your customers with products that work right the first time and every time.

The Competitive Edge

• Over 25 registered patents and otherspending

• Award-winning products internationallyrecognized for design innovation

• A research and development team devotedto designing premium systems

The Product Offering• Proprietary Clutch Systems

• Headrails

• Specialty Products

• Fascia & Cassette Systems

• Roman Shade Systems

• Control Devices

• Safety Components

• Motorization

• Fabrics

rolleaseacmedacontract.com

Look to Rollease Acmeda for:

• Solar shading systems to create the perfect light for any space

• Woven or sheer fabrics that diffuse and reflect sunlight while maintaining the view

• Specially coated woven fabrics for enhanced solar heat control

• Dim-out fabrics offering translucent light and privacy

• 100% opaque blackout fabrics to eliminate virtually every ray

• Technically advanced manual and automated operating systems

• Tensioned shade systems for skylight, angled and bottom-up applications

For assistance on selecting the best shading solution for your project, please contact us

by calling: 800-552-5100 x154or email: contract@rolleaseacmeda.com