SLURRY PUMPS

SLURRY PUMPS

129Did you know that there are other sizes of these pumps available? Please call 1300ALLPUMPS (255 786) for further information.

SLURRY PUMP

PAGE

130

SLURRY PUMPS

SLURRY PUMPS

130Did you know that there are other sizes of these pumps available? Please refer to our website www.allpumps.com.au for further information.

Slurry pumps have many industrial applications where liquids containing particles must be pumped. Applications for slurry pumps include mine dewatering, pumping mine slurries and tailings, mineral processing, fly ash and bottom ash sluicing in coal-fired power plants, mill scale handling, sand and gravel sluicing in quarries and dredging operations, paper mill waste processing and clay slurry processing.

The major concern in pumping abrasive slurries is the wear on the impeller, casing and other wetted parts and along with being abrasive, many of these slurries are corrosive as well.

Rotating unitOversize shaft and bearings for zero shaft deflection. “Run cool” bearing housing for longer bearing and lubrication life.

Unique ultra wear resistant liners and impellersChoice of either white iron alloy wear parts for extreme wear resistance or UEC (Unique Elastomeric Compound) rubber- like liner and impellers for improved life when compared to standard rubber offerings.

Sealing systemAvailable with either standard packed gland arrangement or a drop in cartridge mechanical seal designed for the pump.

Casing and support structure All pump sizes incorporate oversized bearing support, bearing cartridge and front and rear volute casings in high quality cast and ductile iron.

Overview

Diamond Series

SLURRY PUMPS

SLURRY PUMPS

131Did you know that there are other sizes of these pumps available? Please call 1300ALLPUMPS (255 786) for further information.

Over 100 years of mining industry pump experience focused on delivering a PREMIUM range of slurry pumps. The result: the SlurryPro® DIAMOND and UEC Pump Series.

“To provide relief from downtime and maintenance costs”

The Fastest Response - GloballyWith profiled reserve stocks of components and a world class lean manufacturing system, delivery of pumps and parts and associated engineering support is the fastest in the industry – across 4 different continents SlurryPro® has on-the-ground presence in Australia, South America, Europe, and the United States.

Innovation Today For Tomorrow's DemandsEngineering design improvements ensure that SlurryPro® Pumps continue running long after conventional designs have given up. Thanks to innovative design features which allow the pumps to run cooler and cleaner SlurryPro® Pumps improve operating efficiencies and greatly reduce down-time failures. A unique bearing housing design and modular “no fuss” sealing system, liner and wear part options make for a pump that really fits your application. Attention to detail – small details add up to make a big difference.

Focused On The Mining IndustryProven performance in a demanding industry with support and back-up by experienced regional mining industry specialists adds local knowledge to each pump unit supplied.

Product And Part Accountability To Each And Every CustomerQuality control, identification and traceability from foundry to end-user ensure that parts consistently perform at beyond industry expectations.

Special Configurations, Fast!State-of-the-art manufacturing procedures make for reduced turnaround times even for alternative pump configurations and built-up skids.

Not Just Heavy Duty, Super Duty!Designed for the worst duties with oversized shafts and bearings and generous casting wall thicknesses mean that SlurryPro® Pumps continue to deliver in the harshest conditions.

Effortless UpgradeCritical dimensions are interchangeable to other common centrifugal slurry pump designs making it easy to trade up for a SlurryPro®.

SLURRY PUMPS

SLURRY PUMPS

132Did you know that there are other sizes of these pumps available? Please refer to our website www.allpumps.com.au for further information.

Sealing SystemThe modular sealing chamber design of the SlurryPro DIAMOND and UEC series pumps allows for flexibility when specifying new pumps or upgrading existing pumps:

1 Independently lubricated SlurryPro modular cartridge seal O-ring dampened sealing faces for excellent shock resistance, no flushing or water supply required, modular parts for simple on-site repair and extreme tolerance to axial movement means that impeller adjustment does not require seal removal or clamping.

2 Expeller design For low inlet pressure applications.

3 Wear resistant gland packing Tough gland packing on a hardened replaceable shaft sleeve provides a rugged, cost effective sealing solution. A variety of packing materials including chemically and wear resistant braided packing rings and injectable “on the run” sealing products are available.

STUFFING BOX 078 PACKING 111

METAL LANTERNRESTRICTOR 118

GLAND 044

SLURRY PUMPS

SLURRY PUMPS

133Did you know that there are other sizes of these pumps available? Please call 1300ALLPUMPS (255 786) for further information.

Performance Curves

1.5*1

2*1.5

3*2 4*3 6*4 8*6

85

80

75

70

65

60

55

50

45

40

35

30

25

20

15

10

5

0

H(m)

SD Series - SlurryPro DiamondSU Series - SlurryPro UEC

3 6 12 19 25 32 50 63 95 127 158 190 221 253 317Q (l/s)

SD Series - SlurryPro Diamond

SU Series - SlurryPro UEC

Max discharge pressure is dependent on impeller and liner configuration – consult factory

SLURRY PUMPS

SLURRY PUMPS

134Did you know that there are other sizes of these pumps available? Please refer to our website www.allpumps.com.au for further information.

Upgrade With Interchangeable TechnologyThe SlurryPro Silver Series is a flexible, proven range of horizontal and vertical slurry pumps in a wide range of sizes. Available with both high chrome and different grades of rubber wearing parts. The SlurryPro Silver Series pump and spare range allows you to continue using your current pump configurations, spares stock and pipework configuration.

VerticalThis heavy duty range features a cantilever shaft design that eliminates any bearings or seals in the fluid end. An ideal pump for heavy slurry wash down and spill duties. A full range of material options including complete elastomer lined pumps and hard metal options for corrosive and abrasive media duties.

Pumps in all sizes can be configured with a range of column lengths and impeller designs. They are ideal for corrosive coarse particles and high concentrations of slag pulp and are widely used in the metallurgical, mining and coal industies.

HorizontalA complete range of sizes are available across the full selection of pump types and materials. Components come in a range of elastomer and hard metal types and materials to suit any application, for maximum abrasion and corrosion resistance. The removable cartridge-type bearing assembly facilitates easy on-site maintenance procedures on-site.

A range of seal types are provided to suit every requirement, including centrifugal shaft seals to eliminate gland sealing water are available.

SLURRY PUMPS

SLURRY PUMPS

135Did you know that there are other sizes of these pumps available? Please call 1300ALLPUMPS (255 786) for further information.

Silver Series Horizontal Performance Curves

Silver Series Vertical Performance Curves

1.5*1

2*1.5

3*2 4*3 6*4 8*6 10*8 14*12

20*18

12*10

16*14

1½*1C-HH

4*3E-HH 6*4S-HH 6S-HH

60

100

95

90

85

80

75

70

65

60

55

50

45

40

35

30

25

20

15

10

5

01 4 10 23 50 100 160 250 400 600 800 1000

Q (l/s)

H(m)

3*2D-HH

1580

H (m)40

0

Q (l/s)

0 20 40 60 80 100 200 300 400

20

10

30

7.5

3

3 157.5

15

30

55

30

30

55

55

110

110

40SV 65SV 100SV 150SV 250SV 300SV

2200

1500

12001000 850

750700

15

30 55 150

700 = rpm 150 = kW

200SV

SLURRY PUMPS

SLURRY PUMPS

136Did you know that there are other sizes of these pumps available? Please refer to our website www.allpumps.com.au for further information.

Diamond, UEC & Silver Series Horizontal Dimensions

Jn-d1

DO D1

D2

n-d2

d0 d2 d1

GH

NB

VFC

MK

LT

U

D

E

A

n-d2

RYPR RU OLS

TYPE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 n–dsucTion flangE dischargE flangE PumP wEighT

d0 d1 d2 n–d d0 d1 d2 n–d2mETal rubbEr

1.5*1B 583 295 248 197 28 79 206 181 98 171 46 – 143 254 181 38 24 4–Ø14 152 38 114 4–Ø16 165 25 127 4–Ø16 91 77

1.5*1C 759 406 311 254 42 121 306 270 194 254 – 11 175 356 252 48 32 4–Ø19 152 38 114 4–Ø17 152 25 114 4–Ø17 318 –

2*1.5B 592 295 248 197 28 79 217 205 114 184 33 – 143 254 184 38 24 4–Ø14 184 51 146 4–Ø19 165 38 127 4–Ø19 104 118

3*2C 768 406 311 254 42 121 281 238 138 210 71 – 175 356 233 48 32 4–Ø19 216 76 178 4–Ø19 184 51 146 4–Ø19 191 154

3*2D 986 492 364 330 65 164 389 384 254 368 – 51 213 432 298 64 38 4–Ø22 216 76 178 4–Ø19 203 51 165 8–Ø19 750 –

4*3C 843 406 311 254 42 121 354 292 149 262 24 – 175 356 270 48 32 4–Ø19 279 102 235 4–Ø22 229 76 191 4–Ø22 263 236

4*3D 943 492 364 330 65 164 353 292 149 262 100 – 213 432 279 64 38 4–Ø22 279 102 235 4–Ø22 229 76 191 4–Ø22 363 290

4*3E 1240 622 448 457 80 222 492 492 330 432 – – 257 546 381 76 54 4–Ø29 254 102 210 8–Ø19 254 76 210 8–Ø19 1250 –

6*4D 1021 492 364 330 65 164 421 406 229 338 11 – 213 432 318 64 38 4–Ø22 337 152 292 4–22 279 102 235 4–22 626 454

6*4E 1178 622 448 457 80 222 433 406 229 338 138 – 257 546 351 76 54 4–Ø29 337 152 292 4–Ø22 279 102 235 4–Ø22 728 635

6*4S 1668 920 780 450 120 280 596 616 413 546 – 134 640 760 353 90 70 4–Ø35 337 152 292 8–Ø22 305 102 260 8–Ø22 2880 –

8*6E 1302 622 448 457 80 222 557 551 318 460 – 62 257 546 402 76 54 4–Ø29 406 203 356 8–Ø22 368 152 324 8–Ø21 1473 982

8*6R 1360 680 590 350 85 215 – 511 318 460 – 170 490 560 312 70 50 4–Ø28 406 203 356 8–Ø22 368 152 324 8–Ø22 1655 –

8*6T 2275 1150 1040 650 150 250 852 835 584 813 – 160 880 900 358 125 80 4–Ø48 432 203 375 8–Ø29 432 152 375 8–Ø29 6586 –

10*8E 1337 622 448 457 80 222 584 613 381 470 – 83 257 546 403 76 54 4–Ø29 502 254 445 8–Ø29 432 203 375 8–Ø29 1625 1202

10*8R 1395 680 590 350 85 215 – 613 381 470 – 190 490 560 314 70 50 4–Ø28 502 254 445 8–Ø29 432 203 375 8–Ø29 1836 –

10*8ST 1748 1150 780 650 120 280 692 673 419 635 27 – 620 900 439 125 80 4–Ø48 502 254 445 8–Ø29 432 203 375 8–Ø29 3750 3130

12*10ST 1816 1150 780 650 120 280 762 755 464 674 – 6 620 900 461 125 80 4–Ø48 527 305 470 12–Ø25 527 254 470 12–Ø25 4318 3357

14*12ST 1873 1150 780 650 120 280 812 937 629 832 – 224 620 900 486 125 80 4–Ø48 585 356 521 12–Ø25 552 305 495 12–Ø25 6409 4672

16*14TU 2320 1460 1050 900 150 350 953 1048 660 889 – 84 860 1200 597 150 95 4–Ø79 705 406 641 12–Ø35 673 356 610 12–Ø29 10000 –

20*18TU 2475 1460 1050 900 150 350 1100 1420 940 1230 – 420 860 1200 615 150 95 4–Ø79 900 508 800 12–Ø42 900 460 800 12–Ø42 18864 15921

SLURRY PUMPS

SLURRY PUMPS

137Did you know that there are other sizes of these pumps available? Please call 1300ALLPUMPS (255 786) for further information.

Silver Series Vertical Dimensions

PumPa b c

dE f g h j øn k

m n P q PumP wEighT

(kg)s

dischargE flangE siZE

siZE framE TYPE STANDARD TYPE

NONSTANDARD TYPE

NOTE: these are maximum dimensions based on largest motor sizes ø d1 ø d2 ø d0 x-ød

40 PV(L)

40PV 137 285 153

900

12002000

18002500

500 500 450 450 205 18 174

1113

675 248 629

285

280 127 40 98 4-Ø16

40PVRC 140 265 175 1113

65 QV(L)

65QV 227 399 231

1200

120022002800

15002500

680 680 620 620 285 18 265

1390

794 290 681

432

350 178 65 140 4-Ø19

65QVR 230 380 260 1396

100 RV(L)

100RV 256 538 317 15001200200027003200

180024003000

1000 870 800 930 400 22 393

1803

1020 416 960

867

350 229 100 191 8-Ø19

100RVR 266 435 332 1500120027003200

18003000 1809

150 SV(L)

150SV 390 670 365

1800

150028003400

210032003600 1100 1100 1030 1030 500 28 475

2186

1200 476 1011

1737

350 280 150 241 8-Ø22

150SVR 395 670 400 2186

200 SV(L)

200SV 450 805 440 1800150028003600

21003200

1300 1200 1100 1200 600 28 550

2191

1300 476 1011

2800

350 343 200 298 8-Ø22

200SVR 2191

250 TV(L)

250TV 500 500 470 2100180028003600

24003200

1750 1450 1350 1650 700 48 685

2572

1750 561 1246

3700

400 406 250 362 12-Ø25

250TVR 2572

300 TV(L)

300SP 500 1170 559

2100

180028003600

24003200

1750 1450 1350 1650 700 48 700

2476

1750 561 1246 400 483 300 432 12-Ø25

300SPR 400 1090 630 2832

N

S

M

D

R

K

CB

A

HE

F G

4-Øn

X-Ød

Q

P

M+L

D+L

L

J

D2 D1 D0

NOTE: L size: 0,300, 600, 900, 1200, 1800 Standard pump: L=0. R dimension range: 300-50mm.

* Dimensions subject to change without notice

SLURRY PUMPS

SLURRY PUMPS

138Did you know that there are other sizes of these pumps available? Please refer to our website www.allpumps.com.au for further information.

SlurryPro offers a wide range of interchangeable replacement spare parts to suit most common brand slurry pumps.

• Impellers - hard metal and elastomer

• Casing liners - hard metal and elastomer

• Shaft units

• Bearings

• Seals and Sealing Systems

Silver Series Parts