SM FS 7000 9000_8

  • Upload
    serwis

  • View
    221

  • Download
    0

Embed Size (px)

DESCRIPTION

Kyocera 7000 service manual part 8

Citation preview

  • Appendix B

    STATUS PAGE

  • 1-1-17FS-7000+/FS-9000

    CONTENTS

    Appendix B STATUS PAGEStatus page ................................................................................................................ B-1Service information on the status page ........................................................................ B-2Example of the service status page ............................................................................. B-2Service information ...................................................................................................... B-2

  • B-1FS-7000+/FS-9000

    Status page

    The printer can print different types of the status pagethe user status page and the servicestatus page. This section exclusively describes the service status page. For information onthe user status page, refer to the printers Users Manual.Information obtainable on the service page include various settings for the printer, servicestatistics, etc. To print a service status page, proceed as follows:

    1 Ensure that the message display is indicatingReady.

    2 Press the MODE SELECT key.3 Press : until the message display indicates

    Others>.

    4 Press s

    .

    5 Press : repeatedly until the message displayindicates >Service>.

    6 Press s

    . Press : until the message displayindicates >>Print status page.

    7 Press ENTER. The question mark (?)appears at the end.

    8 Press ENTER again. The service statuspage is printed.

    Others>

    >Service>

    >>Print status page>

    >>Print status page?

  • B-2FS-7000+/FS-9000

    Service information on the status page

    An example of the service status page is shown below. (Note the details born by a statuspage may differ from a firmware version to another.) Most of the service information islocated under Service information.

    Example of the service status page

    * The firmware information also appear on the normal status page.

    Service information

    Most of these service information on the status page are alphannumerically-coded. Eachitem is explained below.

    Software version: Released: month/dd/yyyy

    PAGE PRINTER STATUS PAGE

    [A2/00-31][A2][4.00][01/00]/P00/S00/F01/N01/D10:DM0301.DAN/RS2/DK-35/0096/0026/1061/0811/ 30/ 0/ 0/ 0/ 0/ 0/ 0/ 0/ 0/AAAAAAJ/AAAAAAA/AAAAJGD/AAAAJIB/AAAAJIB/SAADEJAD/AA/DF/A0319120/90A03280/A0819110/01000000/00000000/90909090/90909090/DN:SPL8600052 SN:SPL8600033

    Total page 3257

    Controller firmware version* Released date of the firmware

    Service information

    Service information

    Service informationTotal page 3257[A2/00-31][A2][4.00][01/00]

    /P00/S00/F01/N01/D10:DM0301.DAN/RS2/DK-35

    /0096/0026/1061/0811/ 30/ 0/ 0/ 0/ 0/ 0/ 0/ 0/ 0

    /AAAAAAJ/AAAAAAA/AAAAJGD/AAAAJIB/AAAAJIB/SAADEJAD/AA/DF

    /A0319120/90A03280/A0819110/01000000/00000000/90909090/90909090/

    DN:SPL8600052 SN:SPL8600033

    [ 1 2] [ 3 4]

    / 5 6/ 7 8 9 0 !

    / # $ % ^ &

    * ( ) fi

    fl

    @

  • B-3FS-7000+/FS-9000

    Example Meaning Description1 [A2/00-31] Engine ROM version/flash ROM version

    -product ID 36=FS-7000+,31=FS-90002 [A2] Front panel ROM mask version3 [4.00] Boot ROM version4 [01/00] Internal use5 /P00 Parallel interface mode 00=Unidirectional, 04=Nibble

    (Normal), 05=Nibble (Hispeed),07=ECP

    6 /S00 Serial interface error 00=Normal, bit 0=Framing error,bit 1=Overrun, bit 2=Parity error

    7 /F01 Front control panel 01=Locked, 02=Fully locked8 /N01 NVRAM error (Shown only 01=ID error, 02=Version error,

    if error occurred) 03=Checksum error,04=NVRAM error

    9 /D10:DM301.DAN NVRAM download 00=None downloaded, bit 4=Frontinformation panel message data name,

    bit 7=Error0 /RS2 Serial interface mode RS2=RS232C

    RS4=RS422A! /DK-35 Drum kit name@ Total page 3257 Total page count# /0096 Top margin Inches+1/100 inches (FRPO L1/L2)$ /0026 Left margin Inches+1/100 inches (FRPO L3/L4)% /1061 Page length Inches+1/100 inches (FRPO L5/L6)^ /0811 Page width Inches+1/100 inches (FRPO L7/L8)& /0(9) Left margin offset for paper in 1/600 inch

    sources (Manual feed tray,printers cassette, paperfeeders cassette (ifinstalled), from left to right)

    * /AAAAAAJ Page count per paper size A3( /AAAAAAA Page count per paper size B4) /AAAAJGD Page count per paper size A4 /AAAAJIB Drum life counter in pages /AAAAJIB Developer unit life counter in pages /SAADEJAD Fuser unit life counter in pages

  • B-4FS-7000+/FS-9000

    Example Meaning Description /AA Internal usefi /DF Internal usefl /A0319120/ Internal information DN:SPL8600052 Serial number for the drum unit SN:SPL8600033 Serial number for the printer