7/30/2019 Smart Balancer

1/2

Diagnosis

64

Field balancing

SMART BALANCER

A comprehensive package at

a favorable price/performance

ratio

2 simultaneous measuring

channels for highly efficient

field balancing

Optimization balancing for up

to 4 measuring points

Graphical presentation of un-

balance and test run vectorsfor all measuring points

Machine diagnosis with FFT

and SmartFFT analysis

Overall vibration measurement

in accordance with relevant

standards

Oscilloscope function

Powerful SmartReport Soft-

ware included

Laser optical reference sensor

enables safe balancing at

distances up to 0.5 m from therotor shaft

6 hours operation on a single

battery charge no replace-

ment batteries required

Advantages

Range of analysis

SmartBalancer is a portable

balancing instrument for dynamic

balancing of rotors in the installed

condition, measurement of overallvibration, tracking analysis, fre-

quency analysis of vibrations and for

displaying the vibration time history.

SmartBalancer enables rotor vibra-

tions to be reduced by balancing

in-situ and the status of a machine

to be diagnosed. With its extensive

equipment, SmartBalancer also

covers many other vibration measu-

rement tasks a fact which makes

the instrument a powerful tool for

machine diagnosis.

Design

Already with the basic equipment,

the battery powered instrument is

a complete package comprising all

accessories required for 2-channelbalancing.

The scope of supply includes two

piezoelectric vibration sensors with

magnetic holders for level or curved

surfaces and two sensor proves. The

laser optical reference sensor can be

used at a large measuring distance,

providing for high convenience and

operator safety.

SmartBalancer has an ergonomically

designed, shock- and impact resi-

stant light metal housing, designed

for high operator convenience.

Its built-in rechargeable batteries

provide up to more than six hours

of continuous measurement on a

single battery charge. A high-con-

trast monochrome LCD display is

easy to read even under adverse

environmental conditions. Withdialog-driven operator prompting, an

integral evaluation computer, vector

display of unbalance and test run

vectors and output of reports on a

printer (through PC) operation of the

instrument is easy and fast to learn.

The SmartBalancer-Report PC soft-

ware included in the scope of supply

enables measurement results to be

presented in graphical or tabular

form, to be imported into programs

from the Windows Office suite and

highly professional balancing reports

to be created.

7/30/2019 Smart Balancer

2/2

65

Technical data at a glance SmartBalancer

No. of measurement channels 2

No. of measuring points max. 4

Balancing speed 120 - 20,000 min-1

Maximum error 5%

PC connection RS-232 serial interface with9,600 - 115,200 Baud data transfer rate

Power supply and charging unit 100 - 240 V, 50/60 Hz

Power supply Rechargeable battery

Battery operating time Min. 6 hours with continuous measurement

Working temperature range -10C to +50C

Measurement functions Field balancing Measurement of overall vibration Frequency analysis Run-up and run-down curves Vibration versus time Oscilloscope function

Display Monochrom LCD, 128 x 128 Pixel, backlit

Weight 1.2 kg (Measuring instrument)

Dimensions 220 x 110 x 38 mm (Measuring instrument)

Scope of supply

1 SMART BALANCER measuring

instrument with built-in re-char-

geable battery, operating dialog

in German, English, French or

Spanish

2 acceleration sensors SA-011,

with:

1 short sensor probe

1 long sensor probe

2 holding magnets for flat

surfaces

2 holding magnets for curved

surfaces

2 connecting cables, 1.5m long

1 laser optical reference sensor,

with:

1 magnetic stand

2 sets of reflective foil

1 connecting cable, 6 m long

1 CD-ROM with operating manual

in German, English, French and

Spanish, with device firmware andSmartReport software

1 PC connecting cable,

1,5 m long

1 power and charger unit

1 soft case for transporting the

measuring instrument and acces-

sories

Option 01

1 additional acceleration sensor with

two sensor probes, 2 holding mag-

nets, 1 connecting cable 1.5 m long

and 1 connecting cable, 6 m long

Option 02

1 extension cable for acceleration

sensor, 10 m long

Option 03

1 connecting cable for laser optical

reference sensor, 15 m long

Option 04

1 calibration adapter for verification

and auto-calibration of the signal

conditioners of the measuring instru-

ment

Option 05

1 USB-RS 232 Converter

Option 06

1 printed and bound operating

manual, either in German, English,

French or Spanish

5.0

Balancing/diagnostics

ystemscompleteassemblies