50
An Exelon Company smart ~ ideas® for your business PECO Smart Ideas for Your Business Commercial & Industrial Program Application Manual Q1, 2017

smart~ ideas® - PECO Energy Company€¦ · LED Open Case Lighting ..... 34 LED Enclosed Case Lighting, Refrigerated 34 LED Enclosed Case Lighting, Freezer 34 Food Service ... Food

  • Upload
    vanthu

  • View
    213

  • Download
    0

Embed Size (px)

Citation preview

An Exelon Company

smart~ ideasreg ~ for your business

PECO Smart Ideas for Your Business

Commercial amp Industrial Program

Application Manual

Q1 2017

Contents Commercial amp Industrial Program Application Manual 5

Terms and Conditions 7

Retrofit Lighting Solutions 11

General Linear Fluorescent Lamp and Ballast Specification Requirements 11

LED Lamps and Fixtures 11

Minimum Watts Reduced 11

Linear LED (Tubes) 11

Permanent Fixture Removal 12

LED Traffic Signals 19

LED Traffic Signals Incentive Table 19

New Construction Lighting Specifications 20

New Construction Lighting Incentives Table 20

Exterior New Construction Lighting 23

HVAC Equipment 24

Air-Source Air Conditioners and Air-Source Heat Pumps 24

Package Terminal Systems (Replacements) 25

Ductless Mini-Split Heat Pump lt54 Tons 25

Geothermal Heat Pump 25

Other HVAC Equipment 27

Hotel Guest Room Occupancy Sensor 27

ECM Circulation Fan 27

ECM Circulation Pump 27

Retrocomissioning Cooling Systems 27

Retrocomissioning Whole Building 27

Energy Management System 28

Demand Controlled Ventilation 28

Other HVAC Incentives Table 29

Unitary HVAC Chillers 30

Air-Cooled Chillers Water Cooled Positive Displacement Reciprocating Chillers and Water Cooled Centrifugal Chillers 30

Refrigeration 32

Anti-Sweat Heater Controls 32

Evaporator Fan Controls 32

Floating Head Pressure Controls 32

Automatic Door Closers for Walk-In Coolers and Freezers 32

EC Motor for Walk-inReach-in Refrigerated cases or Freezer cases 32

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 2

ENERGY STAR Solid Door Freezer and Glass Door Freezer and Refrigerators 32

Refrigeration Suction Pipe Insulation 33

Night Cover 33

Strip Curtain on Walk-In CoolerFreezer 33

Evaporator Coil Defrost Control 33

Variable Speed Refrigeration Compressor 33

Add Doors to Open Refrigerated Cases 33

Door Gaskets 33

Zero Energy Doors 34

Air Cooled Refrigeration Condenser 34

Oversized Condenser with VFD 34

Case Light Occupancy Controls 34

LED Open Case Lighting 34

LED Enclosed Case Lighting Refrigerated 34

LED Enclosed Case Lighting Freezer 34

Food Service 36

Beverage and Snack Machine Controls 36

ENERGY STARreg Refrigerated Beverage Vending Machines 36

ENERGY STARreg Electric Steam Cooker 36

ENERGY STARreg Electric Combination Oven 36

ENERGY STARreg Commercial Convection Oven 36

ENERGY STARreg Commercial Fryers 36

ENERGY STARreg Commercial Hot Holding Cabinet 36

Motors and Variable Frequency Drives 38

Early Replacement Motors 38

Variable Frequency Drives on HVAC Fan Applications 38

Variable Frequency Drives on Pump Applications 38

Variable Speed Control for Kitchen Exhaust Hoods 38

Variable Speed Drives for Process or Other Equipment 38

Domestic Hot Water 39

Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater 39

Heat Pump Water Heater 39

Low Flow Pre-Rinse Spray Valve 39

Domestic Hot Water Incentive Table 39

Compressed Air Systems 40

No-loss Condensate Drain 40

Air-Entraining air nozzle 40

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 3

Storage Tanks for LoadNo Load Screw Compressors 40

Cycling Refrigerated Thermal Mass Dryer 40

Variable Speed Air Compressor 40

Compressed Air System Optimization 41

Compressed Air Systems Incentive Table 41

Data Centers 42

Air Cooled Chiller 42

Air Cooled Chiller without Condenser 42

Computer Room Air Conditioner 42

Computer Room Air Handler Variable Speed 42

Replacing constant speed CRAH with VSD CRAH 42

Water Cooled Centrifugal Chiller 42

Water Cooled Positive Displacement or Reciprocating Chiller 42

Uninterruptible Power Supply 42

Mainframe Refresh 42

Server Refresh 43

Whole Building Systems 44

Whole Building Systems Approach 44

How to Apply for Whole Building Systems Incentives 44

Customer Eligibility 45

Project Eligibility 45

Whole Building Systems Incentives Table 45

Custom Project Specifications 46

Appendix Program Updates Summary (Q1 2017) 48

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 4

PECO Smart Ideas for Your Business

Commercial amp Industrial Program Application Manual

Program is offered and incentive values and measures contained in this application are valid from June 1 2016 to May 31 2021 or until funds are exhausted

Incentive values and measures may be modified or terminated at any time without prior notice

Follow This Easy Process

Step 1 Verify your Eligibility Applicant must verify that they are a business customer of PECO (commercial industrial

governmental institutional and non-profit) Multifamily applicants may also apply Detailed information is posted on wwwpecocomsmartideas

Project must be a new facility improvement that results in an improvement in electric energy efficiency (kWh) andor a permanent reduction in electric energy usage

All equipment must be installed in facilities served by PECO with a valid PECO account number on an eligible PECO non-residential rate

Refer to the technical specifications in this Application Manual to check eligibility of equipment for incentives

Step 2 Submit Pre-approval Application to Reserve Funds

A pre-approval application must be submitted before you purchase equipment or technology for which the incentive is being requested Applications can be submitted via online mail email or fax

Email pecosmartideasdnvglcom

Mail PECO Smart Ideas for Your Business

4377 County Line Road Chalfont PA 18914

Fax

215-996-3982

Incentive funds will be reserved when your prendashapproval application is approved Complete the Applicant Information form for each of the measures that you are installing

Lighting projects require a lighting worksheet and inventory to be completed in addition to the application form You may submit the application via mail fax or e-mail

For some projects a pre-installation inspection will be required Most projects require documentation of the equipment being replaced

Incentive funds are reserved for 90 days Contact the PECO Smart Ideas team for specific questions regarding funding reservations and extensions

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 5

Step 3 Install Equipment or Perform Project Work The equipment installed must meet or exceed the specifications and requirements found

in measures tables and detailed in the Application Manual Equipment must be installed within the program period

Step 4 Submit Final Application Submit a final application as soon as possible after the project is completed within 90 days of

project completion but no later than May 15 2021 The final application is the same form as the pre-approval application Include the following documentation with your final application customercontractor information a signed final application agreement itemized invoices specifications and an updated scope of work

The program team will review your final application For some projects a final inspection will be part of the final review

The program team will send incentive checks four to six weeks after your final application is approved

If you need assistance please contact our program hotline 866-371-9343

Please visit our website wwwpecocomsmartideas

Pre-Approval Application Checklist Final Application Checklist

Registration Number on Application Signed Final Agreement Form (if applicable) Itemized Invoices

Documentation of existing equipment for Equipment SpecificationsCut Sheets for retrofit projects changes in equipment

Lighting worksheet for lighting projects Certificate of Occupancy (for New Equipment SpecificationsCut Sheets Construction projects only)

Updated Scope if project changed (please Copy of Current PECO Bill advise program staff during installation if Customer Signature on Customer

Acknowledgement scope changes Increase in incentive amount is not guaranteed)

Supporting Documentation Guidelines

Lighting Please attempt to submit photos of existing lighting Projects gt750000 kWh require lighting logging data DLCENERGY STAR certification documentation submittal will streamline review process Plansengineering submittals will be requested for large projects Square footage for centrally-controlled lighting control systems may be required

VFDs Nameplate photos andor engineering schedules of existing motors

Custom or lsquolargersquo (gt250000 KWh) mechanical projects MampV plan will be required for larger projects Program engineers will contact participants to establish MampV protocols

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 6

Terms and Conditions

PECO Energy Company (PECO) is offering prescriptive and custom incentives under the PECO Smart Ideas for Your Business to facilitate the implementation of cost-effective energy efficiency measures for commercial and industrial customers Any and all energy savings or environmental credits generated by the project described in this application will be retained by PECO

Funds are limited and subject to availability The program may be modified or terminated without prior notice

Program Effective Dates

The program is available until May 31 2021 The current cycle year runs from June 1 2016 through May 31 2017 (lsquoProgram Year Eightrsquo) Incentives are offered until approved funds are exhausted or until May 15 2021 whichever comes first All projects must be completed and the final applications received no later than May 15 2021 to be eligible for incentives

Program and Project Eligibility

Smart Ideas for Your Business incentives are available for the common energy efficiency measures listed in this Application Manual Program incentives are available under PECO Smart Ideas for Your Business to non-residential customers within PECOs service territory These incentives are available to all customers who pay into the Energy Efficiency Charge and receive their electricity over PECOrsquos distribution network regardless of the retail electric supplier

Most commercial projects involving energy savings are eligible Incentives are available for both prescriptive and custom measures Prescriptive measures are energy efficiency measures with pre-determined savings and incentive levels and are paid on a per unit basis These measures are available for specific Lighting HVAC Refrigeration and Food Service Variable SpeedFrequency Drives Compressed Air and Domestic Water Heater measures Custom measures include energy efficiency measures not listed on the prescriptive application forms Custom incentives must be approved by PECO in advance are determined on a case-by-case basis and are paid per unit of energy (kWh) saved Examples of projects that are NOT eligible for PECO Smart Ideas for Your Business include onndashsite electricity generation projects focused primarily on power factor improvement and renewable energy projects

Installation must be at the customerrsquos facility and provide 100 of the energy benefits as stated in the application for a period of five years or for the life of the product whichever is less PECO has the right to claim a pro-rated amount of any incentive paid if the customer ceases to be a distribution customer of PECO or removes the equipment or systems at any time during the five-year period or the life of the measure

Incentive Payment Limits

Prescriptive and custom incentives cannot exceed 100 of the customerrsquos total costs Contractor labor costs can be considered in the total project cost while customer internal labor costs cannot

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 7

Application Review Process

Pre-approval is required for all projects A pre-approval application must be submitted before you purchase equipment or technology for which the incentive is being requested Pre-approval is not a guarantee of program acceptance Completed applications will be reviewed in the order received The location or business name on the invoice must be the same as the application information The incentive is reserved for the project when PECO receives a complete preshyapproval application and determines that the project meets the program eligibility requirements Applicants who submit incomplete applications will be notified of deficiencies upon review of the application and could lose their place in line in the review process until all requested information is received Applicants are encouraged to call the program hotline if they have any questions about documentation requirements

PECO will review final applications for eligibility and completeness The final application and all required supporting documentation must be received within 90 days of project completion but no later than May 15 2021 to be eligible for incentives Project documentation including original dated invoices for the purchase and installation of the measures andor product specification sheets is required

The project invoice must provide sufficient detail to separate the project cost from the cost of other services such as repairs and building code compliance PECO reserves the right to request additional supporting documentation necessary to ensure measure eligibility and verify that the expected energy savings will occur Requested information may include but is not limited to equipment purchase dates installation dates proof that the equipment is operational manufacturer specifications warranty information and proof of customer co-payment PECO will make every effort to maintain the confidentiality of customer information except that such information must be provided to the PA PUC and its contractor as well as PECOrsquos contractor for measurement and evaluation

The installed measures are not eligible for incentives from other PA Act 129 Phase 3 Energy Efficiency Programs

Inspections andor PUCrsquos Statewide Program Evaluation

PECO its agents measurement and verification contractor andor the PUC statewide program evaluator have the right to audit or inspect all projects to verify compliance with the program rules and verify the accuracy of project documentation This may include pre-installation andor post-installation inspections detailed lighting layout descriptions metering data collection interviews and utility bill data analyses The customer must allow access to project documents and the facility where the measures were installed for a period of five years after receipt of incentive payment by PECO

Requirements for Custom Project Electricity Savings Calculation

The annual electricity savings must be calculated for custom projects using industry accepted engineering algorithms or simulation models The applicant must estimate the annual electricity usage of both the existing and proposed equipment based on the current operation of the facility If the existing equipment is at the end of its rated useful life the applicant must substitute equipment that would meet the applicable federal and local energy codes as the baseline when calculating the annual energy savings The applicant must be able to clearly describe the method used to calculate the savings The applicant must provide all assumptions used in the calculations and document the source for these assumptions Further information on custom measures can be found in the Application Manual which can be downloaded from

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 8

wwwpecocomsmartideasThe method and assumptions used by the applicant to calculate the annual savings will be reviewed by PECO PECO has sole and final determination of the annual energy savings to be used in calculating the incentive amount PECO also reserves the right to require specific measurement and verification activities including monitoring both before and after the retrofit and to base the incentive payment on the results of these activities

PECO may need to conduct inspections both before and after the retrofit projects to verify equipment and operation conditions Pre-approval application must be submitted while the existing equipment is still in operation in order to allow PECO the opportunity to view the existing equipment

Tax Liability

Incentives may be taxable for most taxpayers If the incentive is more than $600 it will be reported to the IRS and the customer will be provided with an IRS form 1099 unless the customer is exempt PECO is not responsible for any tax liability that may be imposed on any customer as a result of the payment of program incentives All customers must supply their Federal Tax Identification number to PECO in order to receive a Program Incentive Please consult with your tax professional for information on the tax treatment of the incentives

No Endorsement

PECO does not endorse support or recommend any particular manufacturer product or system design in promoting this program and PECO does not guarantee any specific level of energy savings with respect to any product system design or energy efficiency measure

Warranties

PECO DOES NOT WARRANT THE PERFORMANCE OF INSTALLED EQUIPMENT ANDOR SERVICES RENDERED AS PART OF THIS PROGRAM EITHER EXPRESSLY OR IMPLICITLY NO WARRANTIES OR REPRESENTATIONS OF ANY KIND WHETHER STATUTORY EXPRESSEDOR IMPLIED INCLUDING WITHOUT LIMITATIONS WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE REGARDING EQUIPMENT OR SERVICES PROVIDED BY A MANUFACTURER OR VENDOR CONTACT YOUR VENDORSERVICES PROVIDER FOR DETAILS REGARDING PERFORMANCE AND WARRANTIES

Limitation of Liability

By virtue of participating in this program customers agree to waive any and all claims or damages against PECO except the receipt of the program incentive if eligible Participating Customers agree that PECOrsquos liability in connection with this program is limited to paying the program incentive specified Under no circumstances shall PECO its representatives agents or subcontractors be liable for any lost profits special punitive consequential or incidental damages or for any other damages or claims connected with or resulting from participation in this program

Assignment

Customers may assign a portion or all of their program incentive payment to a specified vendor

Customerrsquos Certification Customer certifies that heshe purchased and installed the equipment listed in the application Customer agrees that all information is true and that heshe has conformed to all of the program and equipment requirements listed in the application

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 9

Termination

PECO reserves the right to extend modify (this includes modification of program incentive levels) or terminate this program without prior or further notice

Acknowledgement

I have read understood and am in compliance with all rules and regulations concerning this incentive program I certify that all information provided is correct to the best of my knowledge and I give PECO permission to share my records with the Pennsylvania PUC and agents representatives and contractors it selects to manage coordinate or evaluate the program Additionally I hereby authorize PECO to have reasonable access to my property to inspect the installation and performance of the equipment and installations that are eligible for incentives under the guidelines of the program

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 10

Retrofit Lighting Solutions

General Linear Fluorescent Lamp and Ballast Specification Requirements 32w 4ft HPT8 and reduced wattage T8 lamps must be listed on the Consortium of Energy Efficiency (CEE) product list or must meet CEE standards For further information visit wwwcee1org

LED Lamps and Fixtures The integral lamp or fixture must appear on the Energy Star Qualified Products List or the Design Lights Consortium Qualified Products List

bull Energy Star Qualified Fixture Product List httpwwwenergystargov bull Energy Star Qualified Integral LED lamps httpwwwenergystargov bull Design Lights Qualified Product List httpwwwdesignlightsorg

Minimum Watts Reduced Energy efficient fixtureslamps are required to be lower in load than existing fixtureslamps by specified levels the Minimum Watts Reduced Each lighting measure has its own Minimum Watts Reduced that must be met as eligibility requirement These levels are listed in the lighting worksheet ldquoLighting Incentives Tablersquo tab and reproduced below

Linear LED (Tubes) Linear LED lamps must be listed on the Design LightsTM Consortium (DLC) Qualified Products List

Type A LEDs bull Type A LED linear lamps are powered by a fluorescent ballast bull If present existing magnetic ballast must be removed and replaced with a compatible energy- efficient electronic ballast bull DLC Primary Use Requirement ndash DLC-listed equipment must be classified with one of the following Primary Use designations

o Replacement Lamps (Plug and Play) (UL Type A) bull Label must be affixed to the interior of fixture in a prominent location Label should indicate that the fixture has been retrofitted with

TLEDs and that fluorescent lamps should not be installed as replacements

Type B LEDs bull Type B LED tubes are powered by an internal driver bull Existing fluorescent ballast must be removed and fixturersquos incoming power wires are connected directly to the lamp sockets Strict

adherence to installation instructions is critical when rewiring existing fixtures

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 11

bull The LED linear lamps must be delivered as part of a UL 1598C Classified Luminaire Retrofit Kit with instructions explaining the LED linear lamps must be installed on a luminaire that is already UL Listed

bull The retrofitted luminaire must be clearly identified using the label included with the Retrofit Kit indicating that the luminaire has been modified and can no longer operate the originally intended fluorescent lamp(s)

Type C LEDs

bull Type C LED linear lamps are powered by an external driver bull Existing fluorescent ballast must be removed and replaced with a compatible external driver bull DLC Primary Use Requirement ndash DLC-listed equipment must be classified with one of the following Primary Use designations

o 2-lamp External Driver Lamp-Style Retrofit Kits (UL Type C) o 3-lamp External Driver Style Retrofit Kits (UL Type C) o 4-lamp External Driver Lamp-Style Retrofit Kits (UL Type C)

bull Technical specifications (manufacturerrsquos cut sheet) for the driver must be submitted with the application

Permanent Fixture Removal This measure is to be used only in conjunction with lighting retrofits and is intended for spaces that are currently over lit Incentives are paid $010watt reduced only on fixtures removed not on total watts reduced for entire projects Overall net lumen reduction must be achieved in order to qualify for a permanent fixture removal incentive

Example

(20) Existing fixtures at 10000 lumens each = 200000 lumens

(14) Proposed fixtures at 15000 lumens each = 210000 lumens

Since there is not a net reduction in lumens the six fixtures removed would not be eligible for a permanent fixture removal incentive

It is encouraged that spaces meet recommended foot-candle levels as detailed by IESNA Lighting Design Guide A Program Engineer will evaluate lumens reduction based on the type of fixtures removed and the DLC lumens rating of the fixtures installed

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 12

RETROFIT INTERIOR LIGHTING TABLE

Measure Code

Min Measure Name Watts Incentive Unit

Reduced Technical Specifications

CFL Lighting

CFL1A ENERGY STAR Hard-Wired CFL fixture Indoor AccentTrack 20 $250 lamp

Only complete new fixtures or modular hardwired retrofits with hardwired electronic ballasts qualify

CFL ballast must be programmed start or programmed rapid start with a power factor (PF) ge 090 and a total

harmonic distortion (THD) le 20 Screw-in CFLs are not eligible for this incentive

CFL1B ENERGY STAR Hard-Wired CFL fixture Indoor Directional WallCeiling Mount 20 $250 lamp

CFL1C ENERGY STAR Hard-Wired CFL fixture Indoor Omni-Directional WallCeiling Mount 20 $250 lamp

CFL2A ENERGY STAR Hard-Wired CFL fixture Indoor Portable LampTorchiere 20 $1 lamp

CFL2B ENERGY STAR Hard-Wired CFL fixture Indoor Recessed Downlight 20 $1 lamp

CFL2C ENERGY STAR Hard-Wired CFL fixture Indoor Recessed Downlight Retrofit Module 20 $1 lamp

CFL2D ENERGY STAR Hard-Wired CFL fixture Indoor Under CabinetStrip 20 $1 lamp

CFL3A ENERGY STAR Hard-Wired CFL fixture Outdoor Directional WallCeilingGroundPole Mount 30 $3 lamp

CFL3B ENERGY STAR Hard-Wired CFL fixture Outdoor Omni-Directional WallCeilingGroundPole Mount 30 $3 lamp

CFL3C ENERGY STAR Hard-Wired CFL fixture Outdoor Recessed Downlight 30 $3 lamp

CFL3D ENERGY STAR Hard-Wired CFL fixture Outdoor Recessed Downlight Retrofit Module 30 $3 lamp

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 13

Fluorescent Lighting FL1 Interior T5 New Fluorescent Fixture w Electronic Ballast 11 $5 fixture Any T5 is eligible

FL2 T5HO High-Bay Fixture 54 $25 fixture Fixture efficiency must be gt 90

High bay fixtures must be installed at least 15ft above finished floor

FL3 HPT8 High-Bay Fixture 82 $20 fixture Must use High Ballast Factor (gt96) Fixture efficiency must be gt= 85

High bay fixtures must be installed at least 15ft above finished floor

FL4 HPT8 Fixture 20 $5 fixture Must use Low Ballast Factor (lt80)

FL5 RW T8 Lamp - Lamp only 10 $3 lamp Existing T8 fixture re-ballasting to a higher ballast factor are not eligible

HID Measures HID1 Ceramic HID - 25 -39 Watt 95 $13 fixture

Replacing higher wattage HID or High Pressure Sodium or Mercury Vapor

Interior replacements only

HID2 Ceramic HID - 70 Watt 155 $13 fixture HID3 Ceramic HID - 100 Watt 170 $15 fixture HID4 Pulse Start HID - 150 nominal Watts 72 $10 fixture HID5 Pulse Start HID - 350 nominal Watts 100 $13 fixture

HID6 Pulse Start HID - 1000 nominal Watts 400 $15 fixture

Interior LED Fixtures

LED1 ENERGY STAR Integral LED fixture Indoor Recessed Downlight Retrofit Module 38 $7 fixture Retrofit module of existing recessed fixture

LED2 ENERGY STAR Integral LED fixture Indoor Recessed Downlight 38 $7 fixture

New indoor recessed downlight fixture LED3 ENERGY STAR Integral LED fixture Indoor Portable LampTorchiere 30 $7 fixture

LED4 LED AccentTrack Lighting Fixtures 32 $6 head

LED5 LED Low-Bay Fixtures 150 $20 fixture For replacement of HID fixtures mounted le 15 above finished floor

LED6 LED Low-Bay Retrofit Kits 150 $20 fixture

LED8 LED Troffer Fixtures and Retrofit Kits 5 $10 fixture Troffers typically installed in lay-in ceilings 2x2 2x4 configuration

LED9 LED Surface and Suspended Linear Fixtures 25 $10 fixture Examples of LED surface-mounted luminaires include wrap vapor tight and strip fixtures (non-cooler)

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 14

-

Interior LED High Bay Fixtures

LED10A LED High-Bay Fixtures le 20000 LED lumens 150 $50 fixture

High bay fixtures must be installed at least 15ft above finished floor

LED10B LED High-Bay Fixtures gt 20000 LED lumens 225 $75 fixture

LED11A LED High-Bay Retrofit Kits le 20000 LED lumens 150 $50 fixture

LED11B LED High-Bay Retrofit Kits gt20000 LED lumens 225 $75 fixture

LED Parking Garage and Canopy Fixtures

LED12 LED Parking Garage and Canopy Fixtures and Retrofit Kits Outdoor lt= 5000 LED lumens 50 $15 fixture

Fixtures must be physically installed in a parking garage (area where vehicles are physically parked) or

fuel pump canopy Typically represents replacement of le175 W Metal

Halide or equivalent

LED13 LED Parking Garage and Canopy Fixtures and Retrofit Kits Outdoor 5001 - 10000 LED lumens 70 $30 fixture

Typically represents replacement of Metal Halide or equivalent greater than 175W and less than 400W

Product must be installed in a parking garage (area where vehicles are physically parked) or fuel pump

canopy

LED14 LED Parking Garage and Canopy Fixtures and Retrofit Kits Outdoor gt 10000 LED lumens 150 $50 fixture

Typically represents replacement of ge400 W Metal Halide or equivalent

Product must be physically installed in a parking garage (area where vehicles are physically parked) or

fuel pump canopy LED Screw in Lamps

ESLED1 ENERGY STAR Screw-in LED Bulb (Decorative Globe) 14 $5 lamp Lamp with globe shape such as type G

ESLED2 ENERGY STAR Screw-in LED Bulb (Decorative non-globe 14 $5 lamp Lamps with non-globe or candle-like shape such as type B C CA F

ESLED3 ENERGY STAR Screw-in LED Bulb and Low Voltage Mini-Reflector Bulbs (DirectionalReflector) 14 $5 lamp ANSI standard PAR and MR type lamps

ESLED4 ENERGY STAR Screw-in LED Bulb (Standard) 14 $5 lamp Lamp such as A series

ESLED5 ENERGY STAR Screw-in LED Bulb (Standard 3-Way) 14 $5 lamp Lamp such as A series with three light levels

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 15

- -LED Screw in Lamps Smart Bulbs

ESLED6 ENERGY STAR Screw-in LED Bulb (Decorative Globe Smart Bulb) 14 $5 lamp Lamp with globe shape such as type G

ESLED7 ENERGY STAR Screw-in LED Bulb (Decorative non-globe Smart Bulb) 14 $5 lamp Lamps with non-globe or candle-like shape such as

type B C CA F

ESLED8 ENERGY STAR Screw-in LED Bulb (DirectionalReflector Smart Bulb) 14 $5 lamp ANSI standard PAR lamps

ESLED9 ENERGY STAR Screw-in LED Bulb (Standard Smart Bulb) 14 $5 lamp Lamp such as A series

LED Tubes (replacing fluorescent)

TLED1 LED Replacement Lamps (Tubes) 2 5 $250 lamp Refer to Lighting Technical Specifications for requirements DLC Type A B and C are eligible bullType B linear (Interior driver) LEDs have the following installation requirements

bullExisting fluorescent ballast must be removed and fixturersquos incoming power wires are connected directly to the lamp sockets Strict adherence to installation instructions is critical when rewiring existing fixtures bullThe LED linear lamps must be delivered as part of a UL 1598C Classified Luminaire Retrofit Kit with instructions explaining the LED linear lamps must be installed on a luminaire that is already UL Listed bullThe retrofitted luminaire must be clearly identified using the label included with the Retrofit Kit indicating that the luminaire has been modified and can no longer operate the originally intended fluorescent lamp(s)

TLED2 LED Replacement Lamps (Tubes) 4 10 $4 lamp

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 16

LED Exterior Lighting

ELED1 ENERGY STAR Integral LED fixture Outdoor Recessed Downlight Retrofit Module 24 $10 module

ENERGY STAR or DLC Qualified fixtures ELED2 ENERGY STAR Integral LED fixture Outdoor Recessed

Downlight 24 $10 fixture

ELED3 LED Outdoor Flood Light Fixtures lt= 5000 LED lumens 50 $10 fixture Typically represents replacement of le175 W Metal Halide or equivalent Fixtures must be DLC qualified

ELED4 LED Outdoor Flood Light Fixtures gt 5000 LED lumens 70 $15 fixture Typically represents replacement of Metal Halide or equivalent greater than 175W Fixtures must be DLC qualified

ELED5 LED PoleArm Mounted Parking and Roadway Fixtures and Retrofit Kits lt= 5000 LED lumens 50 $25 fixture Typically represents replacement of le175 W Metal

Halide or equivalent Product must be DLC qualified

ELED6 LED PoleArm Mounted Parking and Roadway Fixtures and Retrofit Kits Outdoor gt 10000 LED lumens 150 $75 fixture

Typically represents replacement of Metal Halide or equivalent greater than 400W Product must be DLC

listed

ELED7 LED PoleArm Mounted Parking and Roadway Fixtures and Retrofit Kits Outdoor 5001 - 10000 LED lumens 70 $50 fixture

Typically represents replacement of Metal Halide or equivalent greater than 175W and less than 400W

Product must be DLC listed

ELED8 LED Wall Mount Fixtures and Retrofit Kits Outdoor lt= 5000 LED lumens 50 $25 fixture Typically represents replacement of le175 W Metal

Halide or equivalent Product must be DLC qualified

ELED9 LED Wall Mount Fixtures and Retrofit Kits Outdoor gt 5000 LED lumens 70 $50 fixture

Typically represents replacement of Metal Halide or equivalent greater than 175W Product must be DLC

qualified Permanent Fixture Removal

PFRA Indoor Permanent Fixture Removal combined with lighting retrofit na $010 watt removed Incentive only valid when units = ldquofixturerdquo in this table

Incentive is only offered when net lumens are reduced PFRB Outdoor Permanent Fixture Removal combined with lighting retrofit na $010 watt removed

Other LED Lighting LEDEXIT LED Exit Sign

na

$2 sign Replacing Incandescent or Fluorescent

SIGN1A Indoor LED Channel Signage $8 letter

Replacing Neon SIGN1B Outdoor LED Channel Signage $8 letter

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 17

Lighting Controls

CTL Unitary Sensor Controls

na

$1500 sensor

Passive infrared ultrasonic detectors are eligible Includes daylighting controls and all occupancy controls

Controls can be onoff stepped or continuous (dimming) Daylight sensor controls are required to be commissioned in order to ensure proper sensor calibration and energy savings

Minimum of 30 watts controlled per control

CLC Interior Central Lighting Controls $00175

square foot of area

under control

Automated central lighting control systems with override capabilities

This measure includes centrally-controlled time clocks wireless on off switches bi level switches computer based

controls pre-set scene selection dimmable ballasts and on-off dimmer switches for non-personal tuning

Floor plan must be submitted verifying square footage

DAYOCC Controls Combination - Daylighting and Occupancy Fixture Mounted $1500 sensor Minimum of 30 watts controlled per control

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 18

LED Traffic SignalsThis measure applies to the early replacement of existing incandescent traffic lights and pedestrian signals with LEDs New LED traffic signals must comply with ENERGY STAR requirements which can be found at httpswwwenergystargoviapartnersproduct_specseligibilitytraffic_eligpdf98bfshy1786

LED Traffic Signals Incentive Table

Round Traffic Signals 8 Red

Incentive per Signal

$15

8 Yellow 8 Green 12 Red

12 Yellow 12 Green

Turn Arrow Signals

8 Red

$13

8 Yellow 8 Green 12 Red

12 Yellow 12 Green

Pedestrian Signals

9 Pedestrian Only

$13

12 Hand Only 12 Pedestrian Only 12 Countdown Only

12 Pedestrian and Hand Overlay 16 Pedestrian and Hand Side by

Side 16 Pedestrian and Hand Overlay

16 Hand and Countdown Side-by-Side

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 19

Lighting Controls that Exceed Code Requirements

New Construction Lighting SpecificationsUnder the Lighting Power Density Approach the lighting power installed is compared with the lighting power allowed by code Incentives are available for systems where the installed lighting power is lower than the code-allowed power by at least 10 Savings are based on the Lighting Power Density (LPD) calculated on a watts per square foot basis Incentives will be paid only on the area of the building where the lighting installation is complete and is ready for occupancy If a portion of a building is not built-out such that the lighting in an area is not complete and ready for occupancy then that portion is not eligible for an incentive Baseline lighting power density is based on ASHRAE 901- 2007 Either the Space-by-Space or Building Area method may be used to calculate the LPD for the purposes of the incentive

Required Documentation bull Lighting Worksheet bull COMcheck Interior Lighting Report or equivalent analysis demonstrating space-byshy

space or building area calculations bull Reflected ceiling plans and electrical plan sheets showing lighting fixture layout bull Lighting fixture schedule sheet including fixture counts bull Fixture submittal or specification sheets showing model number and rated fixture wattage bull Architectural floor plans displaying floor area affected by proposed lighting installation

New Construction Lighting Incentives Table Lighting Wattssq ft

Improvement over of Code Incentive

gt= 10 and lt 20 $0035sq gt= 20 and lt 30 $007sq ft gt= 30 and lt 40 $0105sq

gt= 40 $021 sq ft

Incentives will be paid on a ($005kWh) custom basis Please contact Program Staff for eligibility of lighting controls for New Construction projects

Interior Occupancy Sensors Incentives are offered for occupancy-based controls in areas where they are not required by code Passive infrared ultrasonic detectors and fixture-integrated sensors or sensors with a combination sensor are eligible All sensors must be hard-wired and control interior lighting fixtures The incentive is per Watt controlled An inventory of the controlled fixtures and their wattage must be provided for each sensor with the Final Application

Daylight Dimming System Incentives are offered for daylight sensor controls in spaces with suitable available ambient light for at least part of the day Light may be through skylights clerestories windows or ldquolight tubesrdquo The controls can be onoff stepped or continuous dimming The onoff controller should turn off artificial lighting when the interior illuminance meets the desired indoor lighting level The stepped controller generally dims the artificial lighting 50 when the interior illuminance levels reach 50 of the desired lighting levels Continuous or dimming controllers dim artificial lighting proportionally to the available ambient light All types of daylight sensor controls are required to be commissioned in order to ensure proper sensor calibration and energy savings

Required Documentation bull Cut sheets or submittals of lighting control systems Reflected ceiling plans or schedule

showing which fixtures are controlled by lighting controls

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 20

New Construction Lighting Power Density CodeRequirements ndash Space by Space Method

Building Specific Space Types LPD (Wft2) Building Specific Space Types LPD (Wft2)

GymnasiumExercise Center AutomotivemdashServiceRepair 07

Playing Area 14 Manufacturing

Exercise Area 09 Low (lt25 ft Floor to Ceiling Height) 12

CourthousePolice StationPenitentiary High (gt25 ft Floor to Ceiling Height) 17

Courtroom 19 Detailed Manufacturing 21

Confinement Cells 09 Equipment Room 12

Judges Chambers 13 Control Room 05

Fire Stations HotelMotel Guest Rooms 11 Fire Station Engine Room 08 DormitorymdashLiving Quarters 11

Sleeping Quarters 03 Museum

Post Office-Sorting Area 12 General Exhibition 10 Convention Center-Exhibit Space 13 Restoration 17

Library BankOfficemdashBanking Activity Area 15 Card File and Cataloging 11 Religious Buildings

Stacks 17 Worship Pulpit Choir 24

Reading Area 12 Fellowship Hall 09

Hospital Retail

Emergency 27 Sales Area [For accent lighting see 93121(c)] 17

Recovery 08 Mall Concourse 17

Nurse Station 10 Sports Arena

ExamTreatment 15 Ring Sports Area 27

Pharmacy 12 Court Sports Area 23

Patient Room 07 Indoor Playing Field Area 14

Operating Room 22 Warehouse

Nursery 06 Fine Material Storage 14

Medical Supply 14 MediumBulky Material Storage 09

Physical Therapy 09 Parking GaragemdashGarage Area 02

Radiology 04 Transportation

LaundrymdashWashing 06 AirportmdashConcourse 06

AirTrainBusmdashBaggage Area 10

TerminalmdashTicket Counter 15

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 21

New Construction Lighting Power Density CodeRequirements ndash Building Area Method

Building Area Type 221 LPD (Wft2)

Automotive facility 09

Convention center 12

Courthouse 12

Dining bar loungeleisure 13

Dining cafeteriafast food 14

Dining family 16

Dormitory 1

Exercise center 1

Gymnasium 11

Health-care clinic 1

Hospital 12

Hotel 1

Library 13

Manufacturing facility 13

Motel 1

Motion picture theater 12

Building Area Type LPD (Wft2)

Multifamily 07

Museum 11

Office 1

Parking garage 03

Penitentiary 1

Performing arts theater 16

Policefire station 1

Post office 11

Religious building 13

Retail 15

Schooluniversity 12

Sports arena 11

Town hall 11

Transportation 1

Warehouse 08

Workshop 14

221 In cases where both a common space type and a building specific type are listed the building specific space type shall apply

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 22

Exterior New Construction LightingExterior New Construction savings over code lighting power density will be incentivized using custom lighting measure at $005kWh rate Participants must submit exterior lighting plans Submittals COMCHECK REPORT and lighting schedule for exterior lighting Savings are calculated from the LPD (Wsq ft) indicated below Additional information may be required based on the building exterior type and space description indicated below To contribute to incentive LEDs must satisfy program requirements for DLC Energy Star or equivalent listing

Required Documentation bull COMcheck Interior Lighting Report or equivalent analysis demonstrating space-by-space or

building area calculations bull Drawings showing lighting fixture layout bull Lighting fixture schedule sheet including fixture counts bull Fixture submittal or specification sheets showing model number and rated fixture wattage

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 23

Building Exterior Space Description LPD

Unco erect Pariki Ilg Area Parlurng ots arnd Drives 0 15 WfW

B i ing Grournds W al 1Yays lless Hlan 11] e 10 Wltirneru- 00

W a Nays 10 middot de or greater 112 W

Plaza a reas

Spec rest re areas

Stainh1ays 1ow 2

B i ing 8ntrames and Exits Ma efilbies m wr near foot of door width

Other doors 2o w 1r ear foot of door width

Ctmqpies and Overhimgs Free starndillg and a ched tmd 12s w m2 m bullerhangs

0 door sales Op en areas (ind udi Ilg ve id e sales 05 W lo )

street frontage far vehicle sales lots 21] W linear toot in addi middot on to open are-0bullmiddot lo~nce

B i ing facades 0 2 W tfl2 middot or eacil illumirnated N311 or surface

o r 5 0 Wllinear root fo r eac h m n inated N3l1 o r

surface length

Automated te lle r rnachmiddot es a lld 210 W per loca tion plus 91] night deposito liies W 1pernddiliorml A I middot per

1oca middot om

Eirltrances and gatehouse inspecliion 125 W ffl2 o middot uncovered slatiaBS a goo~ ed acir ies area

Load ing are-0s or law enforcement 0 5 W 2 of u rnco1bullered area fire ambu rnce and otiher emergency service ibullehmiddotctes

Drive-through w indOWs a taslrood 400 W per drive-Hlrough restaurants

Parking near 24 -h our retail 80111 W per main entry entmn ces

HVAC Equipment Air-Source Air Conditioners and Air-Source Heat Pumps New unitary air conditioning units or air source heat pumps that meet or exceed the qualifying cooling efficiency shown in the HVAC Incentives Worksheet are eligible for an incentive They can be either split systems or single package units The efficiency of split systems is based on an ARI reference number All packaged and split system cooling equipment must meet Air Conditioning and Refrigeration Institute (ARI) standards (210240 320 or 340360) be UL listed use a minimum ozone-depleting refrigerant (eg HCFC or HFC) All required efficiencies are based on the Consortium for Energy Efficiency (CEE) high-efficiency commercial air conditioning and heat pump specifications (wwwcee1org) A manufacturerrsquos specification sheet indicating the system efficiency must accompany the application Disposal of the existing unit

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 24

must comply with local codes and ordinances

Package Terminal Systems (Replacements) Package terminal air conditioners and packaged terminal heat pumps are through-the-wall self-contained units that are 2 tons (24000 Btuh) or less All EER values must be rated at 95degF outdoor dry-bulb temperature

Ductless Mini-Split Heat Pump lt54 Tons Incentives are offered for Ductless Mini-Split Heat Pump lt54 Tons with SEER rating greater than or equal to 120 and EER greater than or equal to 145 and HSPF greater than or equal to 90

Geothermal Heat Pump Geothermal equipment is a high-efficiency groundwater source water source or ground source heat pump system that meets or exceeds the energy efficiency requirements shown in the tables below These measures do not apply to heat pump systems coupled with non-heat pump systems such as chillers rooftop AC units boilers or cooling towers which must be filed as custom measures All HVAC applications other than comfort cooling and heating such as process cooling must also be applied for as custom measures

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 25

HVAC Heating Qualifying Incentive

Equipment Type and Cooling Capacity Cooling Qualifying Efficiency ($ per cooling Measure Code Efficiency

ton)

Air Cooled Air Conditioner

H01 lt 54 tons (lt 65000 Btuhr) 15 SEER NA $22

H02 lt 54 and lt 11 25 tons

125 IEER $22 (lt 65 000 Btuh and lt 135 000 Btuhr) NA

H03 lt11 25 and lt 20 tons

123 IEER NA $22 (lt 135000 Btuh and lt 240000 Btuhr)

H04 lt 20 and lt 6333 tons (~

11 1 IEER NA $22 240000 Btuh and lt 760000 Btuhr)

HOS ~ 6333 Ions (~ 760000 Btuhr) 103 IEER NA $22

Air Cooled Heat Pumps

H06 lt 54 tons (lt 65000 Btuhr) 143 SEER 87 HSPF $30

H07 lt 54 and lt 11 25 tons

123 IEER 3 3 COP $30 (lt 65000 Btuh and lt 135000 Btuhr)

HOS lt11 25 and lt 20 tons

1U IEER 3 2 COP $30 (lt 135000 Btuh and lt 240000 Btuhr)

H09 lt 2000 tons (240000 Btuhr) 105 IEER 3 2 COP $30

Packaged Terminal Systems (PTAC and PTHP) (PTHP only)

H10 lt 8000 Btuhr (lt066 tons) 11 8 EER 33 $17

H11 ~8000 and lt10500 Btuhr (~066 and lt 0875 tons) 11 4 EER 32 $17

H12 gt10500 Btuhr ( 875 tons) 107 EER 31 $17

H22 lt 54 tons (lt 65000 Btuhr) 121 EER 12 3 IEER NA $22

lt 54 and lt 11 25 tons 121 EER 12 3 IEER $22 H23

(lt 65000 Btuh and lt 135000 Btuhr) NA

H24 lt11 25 and lt 20 tons

120 EER 12 2 IEER $22 (lt 135000 Btuh and lt 240000 Btuhr) NA

H25 lt20 and lt 633 tons

119 EER 12 2 IEER $22 (lt 240000 Btuh and lt 760000 Btuhr) NA

H26 ~ 633 tons( lt760000 Btuhr) 110 EER 11 1 IEER NA

$22

HVAC Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 26

Other HVAC EquipmentHotel Guest Room Occupancy Sensor Incentives are offered for occupancy-based controls that control electric air conditioning air source heat pumps and or electric heating units for individual hotel rooms Systems with nonshyelectric heat are not eligible Sensors must be controlled by automatic occupancy detectors or a key-card system and the default setting for controlled units differ by at least 5 degrees (or shut the unit fan and heating or cooling off completely) from the operating set point during unshyoccupied periods The control system may also be tied into other electric loads such as lighting and plug loads to shut them off when occupancy is not sensed The incentive is per room Replacement or upgrades of existing occupancy-based controls are not eligible as a prescriptive incentive

Economizer Integrated Dual Enthalpy Economizer ControlsThis measure is targeted to non-residential establishments whose HVAC equipment is not equipped with a functional economizer

Circulation Fan High-Volume Low-SpeedFans must be greater than 16 feet in diameter and have variable speed control

ECM Circulation Fan This measure is targeted to non-residential customers whose air handling equipment currently uses a SP or PSC fan motor rather than an ECM This measure applies only to circulating fan motors of 1 HP or less Above 1 HP motors are governed by NEMA standards and would see little to no efficiency benefit by adding an ECM The targeted fan can supply heating or cooling only or both heating and cooling

ECM Circulation Pump This measure is targeted for replacement of a shaded pole or permanent split capacitor pump or motor with an electronically commutated pump or motor le75 HP

Retrocomissioning Cooling Systems Confined to chiller plant andor isolated packaged units For reservation must contain proposal with defined scope at equipment level that demonstrates energy savings For final approval required final commissioning report including raw data (TAB reports) demonstrating actual scope

This prescriptive measure can be used for facilities with maximum cooling demand less than 1687 tons Larger systems require the use of custom HVAC measure

Retrocomissioning Whole Building Covers all relevant major mechanical systems such as chiller plant air side systems compressed air andor process systems For reservation must contain proposal with defined scope at equipment level that demonstrates energy savings For final approval required final commissioning report including raw data (TAB reports) demonstrating actual scope

This prescriptive measure can be used for facilities less than 404858 square feet Larger facilities require the use of custom HVAC measure

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 27

Energy Management System For installing a web-based building automation system in existing buildings that currently have no digital automated HVAC controls or have outdated pneumatic control systems with inoperable time control functions Existing HVAC control systems must not have time-of-day scheduling Upgrading obsolete EMS HVAC system with inoperable time clock functions will be reviewed on a case-by-case basis for incentive eligibility This incentive cannot be combined with incentives for programmable thermostats or setback-setup controls Must include the controls strategy and a scaled floor-plan with controlled areas highlighted HVAC BAS systems must be new and include bull Central time clock control bull Web-based interface with PC-based controls and graphic bull Building performance Tracking bull Open-protocol architecture controls system shall consist of either LonTalk (ANSICEA 7091) or BACNet (ASHRAE ANSI 135) protocol being used between all controlled and controlling devices and every node on the network bull Minimum setback period must exceed 2200 hours per year bull A minimum setback space temperature of at least 10degF when heating and 5degF when cooling bull Ability to adjust schedules and settings remotely over the internet bull Report generation describing energy and operating trends

This prescriptive measure can be used for facilities with maximum cooling demand less than 456 tons Larger systems require the use of custom HVAC measure

Demand Controlled Ventilation New ventilation controls must use carbon dioxide levels to measure occupancy and modify the percentage of outside air based on occupancy levels Only buildings with space heating and cooling requirements are eligible Conditioned spaces must be kept between 65ordmF and 75ordmF during occupied operating hours Carbon dioxide sensors must be installed in conjunction with fully functioning motor operated outside air dampers Dual temperature air-side economizers with zone-level CO2 sensors for rooftop units are eligible

This prescriptive measure can be used for facilities with maximum cooling demand less than 2210 tons Larger systems require the use of custom HVAC measure

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 28

Other HVAC Measures- consult project manual for eligibility specifications HVAC

Measure Incentive Unit Quantity Incentive

Measure Code er Unit

H1 8 Hotel Guest Room Occupancy Sensor Room $20

H1 9 Economizer Integrated Dual Enthalpy Economizer Controls Ton $1 5

H20 Circulation Fan High-Volume Low-Speed Unit $30

H21 ECM Circulation Fan Fan $1 5

H27 ECM Circulation Pump Pump $50

H28 Retrocommissioning Cooling Systems

Ton $750

H29 Retrocommissioning Whole Buidling

Square Foot $010

H29 Energy Management System Ton $2500

H30 Demand Controlled Ventilation Ton $2500

Other HVAC Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 29

Unitary HVAC Chillers

Air-Cooled Chillers Water Cooled Positive Displacement Reciprocating Chillers and Water Cooled Centrifugal Chillers Chiller applications including existing multiple chiller configurations (including redundant or lsquostand-byrsquo chillers) existing chillers serving multiple load groups and chillers in industrial applications are defined as non-standard applications and must follow a site-specific custom protocol $005kWh) rate

Incentives are offered for chillers with an IPLV value (expressed in kW per ton) that is less than or equal to the qualifying efficiency shown in the table below The chiller efficiency rating must be based on ARI Standard 550590-2003 for IPLV conditions The chillers must meet ARI standards 550590-2003 be UL listed and use a minimum ozone-depleting refrigerant (eg HCFC or HFC) The ARI net capacity value should be used to determine the chiller tons A manufacturerrsquos specification sheet with the rated kWton-IPLV or COP-IPLV must accompany the application along with the four point performance data that is the basis for the IPLV The application must include a certification that the chiller is appropriately sized for site design load conditions

Chillers must satisfy efficiency requirements for both full load and IPLV efficiencies for either Path A or Path B The table shows the minimum efficiency ratings to qualify for the prescriptive incentive which must be consistent with the expected operating conditions of the efficient chiller For example if the efficient chiller satisfies Path A and generally performs at part load the appropriate baseline chiller efficiency is the IPLV value under Path A If the efficient chiller satisfies Path B and generally performs at full load the appropriate baseline chiller efficiency is the full load value under Path B Generally chillers operating above 70 percent load for a majority (50 or more) of operating hours should use Path A and chillers below 70 load for the majority of operating hours should use Path B

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 30

C3 lt 75 tons

C4 75 tons and lt 150 tons

cs ~ 150 tons and lt 300 tons C6 ~ 300 tons

Water Cooled Centrifugal Chillers C7 lt 300 tons CB ~ 300 tons and lt 600 tons

C9 ~ 600 tons

Path A

Qualifying Full Load Efficiency

Qualifying IPLV Efficiency

Path B

Qualifying Full Load Efficiency

Qualifying IPLV Efficiency

0780 kWton 0567 kWton 0800 kWton 0540 kWton

0775 kWton 0554 kWton 0790 kWton 0527 kWton

0680 kWton 0522 kWton 0718 kWton 0486 kWton 0620 kWton 0486 kWton 0639 kWton 0441 kWton

0634 kWton 0536 kWton 0639 kWton 0405 kWton 0576 kWton 0494 kWton 0600 kWton 0360 kWton

0570 kWton 0494 kWton 0590 kWton 0360 kWton

I

Incentive ($ton)

$17

$17

Unitary Chiller Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 31

Refrigeration

Anti-Sweat Heater Controls Incentives are offered for devices that sense the relative humidity in the air outside of the display case and cycles or turns off the glass door (if applicable) and frame anti-sweat heaters when the ambient dew point is below a preset set point Technologies that can turn off anti-sweat heaters based on sensing condensation (on the inner glass pane) also qualify Incentive is based on the number of doors

Evaporator Fan Controls This measure is for the installation of controls in medium temperature walk-in coolers The controller reduces airflow of the evaporator fans when there is no refrigerant flow The measure must control a minimum of 120 HP where fans operate continuously at full speed The measure also must reduce fan motor power by at least 75 during the off cycle This measure is not applicable if any of the following conditions apply 1) Compressor runs all the time with high duty cycle 2) Evaporator fan does not run at full speed all the time 3) Evaporator fan motor runs on poly-phase power 4) Evaporator fan motor is not shaded-pole or permanent split capacitor (PSC) 5) Evaporator fan does not use off-cycle or time-off defrost

Floating Head Pressure Controls Controls must vary head pressure to adjust condensing temperatures in relation to outdoor air temperature Must replace existing constant pressure or manually controlled systems to achieve reduced head pressure in order to maintain a minimum saturated condensing temperature of 70 degF or a 20 degF variance below design heat pressure during mild weather conditions Compressor size must be at least 5 HP

Automatic Door Closers for Walk-In Coolers and Freezers The auto-closer should be applied to the main insulated opaque door(s) of a walk-in cooler or freezer The auto-closer must be able to firmly close that door when it is within one inch of full closure This must be a newly installed automatic door closer replacements on previously installed door closers are not eligible for an incentive

EC Motor for Walk-inReach-in Refrigerated cases or Freezer cases Incentives are offered for replacement of an existing standard-efficiency shaded-pole or permanent split capacitor evaporator fan motor in refrigerated display cases or fan coil in walk-ins The replacement unit must be an Electronically Commutated Motor (ECM) This measure cannot be used in conjunction with the Evaporator Fan Controller measure

ENERGY STAR Solid Door Freezer and Glass Door Freezer and Refrigerators Incentives are offered for replacement of existing self-contained refrigerators and freezers with units that are ENERGY STARreg listed Only units with built-in refrigeration systems are qualified Units with remote refrigeration systems or units do not qualify Customers must provide proof that the appliance meets the CEE or ENERGY STAR efficiency specifications using ASHRAE Standard 72-2005 (38degF plusmn 2degF) Incentive is per unit

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 32

Refrigeration Suction Pipe Insulation 1 Must insulate bare refrigeration suction lines of 1 58 inches in diameter or less on existing equipment only 2 Cooler lines require frac34 inch of flexible closed-cell nitrite rubber or an equivalent insulation 3 Freezer lines require 1-inch of flexible closed-cell nitrite rubber or an equivalent insulation 4 Insulation exposed to the outdoors must be protected from the weather (ie jacketed with a medium-gauge aluminum jacket)

Night Cover 1 Must install a cover on an existing open refrigerated display case to decrease its cooling load during off hours 2 The equipment manufacturer must not object to the use of night covers for the existing display case model 3 This rebate is based on the linear footage of the installed 4 The cover must be applied for a period of at least six hours

Strip Curtain on Walk-In CoolerFreezer 1 New strip curtains or plastic swinging doors must be installed on doorways of refrigerated spaces (conditioned to less than 50deg F) 2 Rebate is based on the linear footage of the doorway that the strip curtains are being installed in 3 Opening between the strip curtain and bottom of doorway must be no larger than 1 inch 4 Strips must have an overlay greater than 1 inch

Evaporator Coil Defrost Control 1The current system must include an operating electric defrost system with a functional electroshymechanical time clock 2 Evaporator coil temperature and pressure must be monitored by controller in order to determine optimal defrost cycles 3 New intelligent control systems to control the defrost systems will typically replace timed- defrost controls

Variable Speed Refrigeration Compressor This measure VSD control for refrigeration systems and its eligibility targets applies to retrofit construction in the commercial and industrial building sectors it is most applicable to grocery stores or food processing applications with refrigeration systems This protocol is for a VSD control system replacing a slide valve control system

Add Doors to Open Refrigerated Cases The eligible retrofit equipment is either no sweat doors or doors with anti-sweat heaters If a lighting retrofit is included with the new doors it must consume the same amount of energy or less energy than the old lighting Upgrades to lighting or other system components should be processed separately Horizontal cases are not eligible and should be processed as custom

Door Gaskets PECO Smart Ideas For Your Business CampI Program Application Manual

Q1 2017 pg 33

This measure is applicable to commercial refrigeration and applies to the replacement of worn-out gaskets with new better-fitting gaskets Applicable gaskets include those located on the doors of walk-in andor reach-in coolers and freezers This protocol applies to the main doors of both low temperature (ldquofreezerrdquo ndash below 32 degF) and medium temperature (ldquocoolerrdquo ndash above 32 degF) walk-ins

Zero Energy Doors For this measure a no-heatlow-heat clear glass door must be installed on an upright display case It is limited to door heights of 57 inches or more Doors must have either heat reflective treated glass be gas filled or both This measure applies to low temperature cases onlymdashthose with a case temperature below 0degF Doors must have 3 or more panes Total door rail glass and frame heater amperage ( 120 volt) cannot exceed 039413 amps per door for low temperature display cases Rebate is based on the door width (not including case frame)

Air Cooled Refrigeration Condenser Approach temperature lt8F for low temperature loads lt13F for medium temperature loads

Oversized Condenser with VFD New standalone condenser must no more than 150 larger than load

Case Light Occupancy Controls Acceptable for freezer or refrigerated cases as well as open cases or cases with doors

LED Open Case Lighting For replacing open case T8 or T12 fluorescent fixtures with DLC listed LEDs on refrigerators coolers and freezers

LED Enclosed Case Lighting Refrigerated LED case lighting with or without motion sensors on enclosed refrigerated vertical displays The baseline equipment is assumed to be cases with uncontrolled T8 or T12 linear fluorescent lamps

LED Enclosed Case Lighting Freezer LED case lighting with or without motion sensors on enclosed freezer vertical displays The baseline equipment is assumed to be cases with uncontrolled T8 or T12 linear fluorescent lamps

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 34

Refrigeration Measures Ref Measure

Measure Incentive Unit IncentiveUnit Code R01 Anti-Sweat Heater Controls Door $30

R02 Evaporator Fan Controls Controller $50

R03 Floating-head Pressure Controls HP $20

R04 Automatic Door Closers fo r Walk-in Coolers Door $75

R05 Automatic Door Closers fo r Walk-in Freezers Door $75

R06 Evaporator Fan EC Motor fo r Reach- in Cases Motor $35

RO Evaporator Fan EC Motor fo r Walk-in Cases Motor $50

R08 ENERGY STARreg Glass Door Freezer lt15 Cu Ft Unit $100

R09 ENERGY STARreg Glass Door Freezer 15- 49 Cu Ft Unit $125

R10 ENERGY STARreg Glass Door Freezer ~ 50 Cu Ft Unit $145

R11 ENERGY STARreg Solid Door Freezer Unit $75

R12 ENERGY STARreg Glass Door Refrigerator lt50 Cu Ft Unit $30

R13 ENERGY STARreg Glass Door Refrigerator gt= 50 Cu Ft Unit $50

K14 t NtKGY ~ I AKreg ~Olld Uoor Ketngerator $ OU Cu t-t Unit $~0

R15 Suction Pipe Insulation Walk-in Coolers Linear Foot $050

R16 Suction Pipe Insulation Walk in Freezers Linear Foot $075

R17 Night Cover Linear Foot $800

R18 Strip Curtains on Walk-in Cooler Linear Foot $250

R19 Evaporator Coil Defrost Control Controller $7500

R20 Variable Speed Refrigeration Compressor Compressor $85

R21 Add Doors to Open Refrigerated Cases Door $55

R22 Door Gaskets Door $250

R23 Zero Energy Doors Door $50

R24 A ir Cooled Refrigeration Condenser Ton $10

R25 Oversized Condenser with VFD Ton $10

R26 Case Light Occupancy Controls Door $8

R27 LED Open Cose Lighting Cose $10

R28 LED Enclosed Case Lighting Refrigerated Door $30

R30 LED Enclosed Case Lighting Freezer Door $30

Refrigeration Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 35

Food Service Beverage and Snack Machine Controls Incentives are offered for refrigerated vending machines that contain non-perishable bottled and canned beverages Controller for both types of systems must include a passive infrared occupancy sensor to turn off fluorescent lights and other energized machine systems when the surrounding area is unoccupied for 15 minutes or longer For the refrigerated machines the control logic may include periodic power up at 2-hour intervals or longer to maintain product temperature and provide compressor protection

ENERGY STARreg Refrigerated Beverage Vending Machines Incentives are offered for ENERGY STARreg beverage vending machines Qualifying machines can be found at httpswwwenergystargovproductsothervending_machines

ENERGY STARreg Electric Steam Cooker This measure applies to the installation of electric ENERGY STAR steam cookers as either a new item or replacement for an existing unit Gas steam cookers are not eligible The steam cookers must meet minimum ENERGY STAR efficiency requirements A qualifying steam cooker must meet a minimum cooking efficiency of 50 percent and meet idle energy rates specified by pan capacity

ENERGY STARreg Electric Combination Oven This measure applies to electric ovens capable of handling single 12 x 20 x 25 pan per rack

ENERGY STARreg Commercial Convection Oven The oven must meet or exceed heavy load potato cooking energy efficiency of greater than 70 utilizing ASTM Standard F149 Applies only to electric ovens

ENERGY STARreg Commercial Fryers The commercial fryer must have a tested heavy load (French fry for large vats) cooking energy efficiency of greater than 80 utilizing American Society for Testing and Materials (ASTM) Standard F1361 for commercial fryers and ASTM Standard F2144 for large vat fryers Multiple vat configurations are paid per qualifying vat ENERGY STAR maintains a list of qualifying products and specifications at httpwwwenergystargov

ENERGY STARreg Commercial Hot Holding Cabinet Energy STAR rating electric

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 36

Food Service amp Other Measures FoodOther

Measure Incentive Unit Incentive

Measure Code Unit

F01 Beverage Machine Controls Unit $25

F02 Snack Machine Controls Unit $20

F03 ENERGY STARreg Refrigerated Beverage Vending Machir Unit $125

F04 ENERGY STARreg Commerc ial Steam Cooker Unit $200

F05 ENERGY STARreg Electric Combination Oven Unit $200

F06 ENERGY STARreg Commercial Electric Convection Oven Unit $150

F07 ENERGY STARreg Commerc ial Fryers Unit $100

F08 ENERGY STARregCommerc ial Hot Holding Cabinet Unit $200

Food Service Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 37

Motors and Variable Frequency DrivesEarly Replacement Motors For constant speed and uniformly loaded motors this measure applies to the replacement of old motors with new energy efficient motors of the same rated horsepower Old motors must be less than 15 years Replacements where the old motor and new motor have different horsepower ratings are considered custom measures Motors with variable speeds variable loading or industrial-specific applications are also considered custom measures

Motors Incentive Table Motors

Measure Code

HP Incentive per Motor

M01 15 - 10 $40 M02 11 - 50 $100 M03 51-100 $150 M04 gt100 $300

Only VFDs on unitary systems are eligible Non-unitary systems must be submitted as a custom measure Soft start motors are not eligible

Variable Frequency Drives on HVAC Fan Applications Incentives are offered for installing VFDs on existing HVAC fans that do not have pre-existing VFDs This measure applies to HVAC supply and return fans only All other fans including cooling tower fans must be submitted as custom measures Manually fixed speed settings on HVAC fans must be submitted via custom application The VFD must control motor speed automatically in response to pressure flow temperature or other variable signal The installation of a VSD must accompany the permanent removal or disabling of any throttling devices such as inlet vanes bypass dampers and throttling valves etc The incentive is offered per controlled HP

Variable Frequency Drives on Pump Applications Incentives are offered for installing VFDs on existing chilled water pumps and heating hot water pumps that do not have existing VFDs This measure applies to chilled water pumps and heating hot water pumps only All other pumps must be submitted as custom measures Manually fixed speed settings on pumps must be submitted via custom application The VFD must control motor speed automatically in response to pressure flow temperature or other variable signal The installation of a VSD must accompany the permanent removal or disabling of any throttling devices such as throttling valves The incentive is offered per controlled HP

Variable Speed Control for Kitchen Exhaust Hoods The measure consists of installing a new VSD in conjunction with a sensor control system that varies the exhaust rate of kitchen ventilation (exhaust andor makeup air fans) based on the heat and effluent output from the cooking appliances (ie the more heat and smokevapors generated the more ventilation needed) This involves installing a temperature sensor in the hood exhaust collar andor an optic sensor on the end of the hood that senses cooking conditions and allows the system to automatically vary the rate of exhaust to match requirements by adjusting the fan speed accordingly

Variable Speed Drives for Process or Other Equipment VFD must be used in conjunction with a process (non HVAC) application To qualify for this incentive the driven equipment must operate at least 2000 hours per year Redundant or back- up units do not qualify VFDs replacing existing VFDs do not qualify The VFD must control motor

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 38

speed automatically in response to pressure flow temperature or other variable signal VFDs installed as ldquosoft startrdquo without automatic manual closed loop speed control do not qualify The installation of a VFD must accompany the permanent removal or disabling of any throttling devices such as throttling valves The incentive is per controlled HP and only applies to controlled motors less than 50 HP

VSDVFD Incentives Table VFD

Measure Code

Measure Unit Incentive per Unit

Fan Application

V01 VFD on HVAC Fan HP $25 Pump Application

Variable Speed Control for Kitchen Exhaust Hoods

Variable Speed Drives for Process or Other Equipment

V02 VFD on Chilled Water Pumps HP $25 V03 VFD on Heating Hot Water Pumps HP $25

V04 Kitchen Exhaust Fan Retrofit Hood HP $500

V05 Process Motor lt 50 HP HP $50

Domestic Hot Water Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater This measure documents the energy savings attributed to converting from a standard electric water heater to an ENERGY STAR natural gaspropane-fired water heater or a standard oil-fired water heater with an Energy Factor of 0585

Heat Pump Water Heater This includes heat pump water heaters with energy factors meeting ENERGY STAR criteria The measure described here involves a direct retrofit of a resistive electric water heater with a heat pump water heater It does not cover systems where the heat pump is a pre-heater or is combined with other water heating sources More complicated installations can be treated as custom projects

Low Flow Pre-Rinse Spray Valve This measure applies to efficient low flow pre-rinse sprayers in grocery and food service applications The most likely areas of application are kitchens in restaurants and hotels Only premises with electric water heating may qualify for this incentive In addition the replacement pre-rinse spray nozzle must use less than 16 gallons per minute with a cleanability performance of 26 seconds per plate or less Low flow pre-rinse sprayers reduce hot water usage and save energy associated with water heating

Domestic Hot Water Incentive Table

Measure Code Measure Unit Retrofit Incentive per

Unit

W01 Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater Unit $100

W02 Heat Pump Water Heater Unit $100 W03 Low-Flow Pre-Rinse Spray Valve Valve $17

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 39

Compressed Air SystemsNo-loss Condensate Drain No-loss Condensate Drains are controlled by a sensor that monitors the level of condensate and only open when there is a need to drain condensate They close before compressed air is allowed to escape This measure is targeted to non-residential customers whose equipment is a timed drain that operates on a pre-set schedule Acceptable baseline conditions are compressed air systems with standard condensate drains operated by a solenoid and timer

Air-Entraining air nozzle This measure is targeted to non-residential customers whose compressed air equipment uses stationary air nozzles in a production application with an open copper tube of 18rdquo or 14rdquo orifice diameter Energy efficient conditions require replacement of an inefficient non-air entraining air nozzle with an energy efficient air-entraining air nozzle that use less than 15 CFM at 100 psi for industrial applications

Storage Tanks for LoadNo Load Screw Compressors This measure protocol applies to the installation of air receivers with pressureflow controls to loadno load compressors Loadno load compressors unload when there is low demand The process of unloading is done over a period of time to avoid foaming of the lubrication oil Using a storage tank with pressureflow control will buffer the air demands on the compressor Reducing the number of cycles in turn reduces the number of transition times from load to no load and saves energy The baseline equipment is a loadno load compressor with a 1 galcfm storage ratio or a modulating compressor with blowdown The high efficiency equipment is a loadno load compressor with a minimum storage ratio of 4 gallons of storage per cfm

Cycling Refrigerated Thermal Mass Dryer When air is compressed water vapor in the air condenses and collects in liquid form Some of this condensate collects in the air distribution system and can contaminate downstream components such as air tools with rust oil and pipe debris Refrigerated air dryers remove the water vapor by cooling the air to its dew point and separating the condensate Changes in production and seasonal variations in ambient air temperature lead to partial loading conditions on the dryer Standard air dryers use a hot gas bypass system that is inefficient at partial loads A Cycling Thermal Mass Dryer uses a thermal storage medium to store cooling capacity when the system is operated at partial loads allowing the dryer refrigerant compressor to cycle

This measure is targeted to non-residential customers whose equipment is a non-cycling refrigerated air dryer with a capacity of 600 cfm or below Acceptable baseline conditions are a non-cycling (eg continuous) air dryer with a capacity of 600 cfm or below The replacement of desiccant deliquescent heat-of-compression membrane or other types of dryers does not qualify under this measure

Variable Speed Air Compressor This type of compressor uses a special drive to control the speed (RPM) of the unit which in turn saves energy compared to a fixed speed equivalent

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 40

No-loss Condensate Drain Air-Entraining Air Nozzle Cycling Refrigerated Thermal Mass Dryer

Compressor Incentive per

Equipment Type Units Quantity Daily Operating Unit

Hours

CA04 Storage Tanks for LoadNo Load Screw

Compressor HP $10 Compressors

CA05 Variable Speed Air Compressor

Compressor HP $30

CA06 Compressed Air System Optimization

Compressor HP $50

Compressed Air System Optimization The submitted optimization measures must be identified in an Air System Audit or equivalent study to be eligible The measures must demonstrate energy savings as evaluated by a Program Engineer Additionally measures must also fall under one or more of the category below to be eligible

1) Install storage Receivers (new receivers only replacing existing storage receivers are ineligible)

2) Compressor control (must demonstrate improvement in partial load efficiency of the compress air system including reduceeliminate partially loaded units)

3) Dryer control 4) Source pressure reduction 5) Right-sizing distribution components such as piping filters regulators

connectors and hoses (routine maintenance replacements are ineligible) 6) Leakage detection and repair 7) Eliminate low-efficiency end-usages of compressed air 8) Heat recovery (most reduce electricity consumption of the replaced heat source)

Compressed Air Systems Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 41

lt65000 Btuh

~ 65000 Btuh and lt135000 Btuh

135000 Btuhand lt240000 Btuh

240000 Btuh and lt760000 Btuh

760000 Btuh

154

142

135

125

123

Chiller Capacity Path APath B efficiency (kWton )

lt 150 tons

~150 tons and lt300 tons

300 tons and lt400 tons

400 tons and lt600 tons

600 tons

lt75 tons

~75 tons and lt150 tons

~150 tons and lt300 tons

~300 tons and lt600 tons

600 tons

0610 FU0695 FL and 0550 IPLV0440 IPLV

0610 FU0635 FL and 0550 IPLV0400 IPLV

0560 FU0595 FL and 0520 IPLV0390 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

Path APath B efficiency (kWton )

0750 FU0780 FL and 0600 IPLV0500 IPLV

0720 FU0750 FL and 0560 IPLV0490 IPLV

0660 FU0680 FL and 0540 IPLV0440 IPLV

0610 FU0625 FL and 0520 IPLV0410 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

Data Centers Data Center incentives are available for facilities ranging in size from office server closets to large standalone facilities

Air Cooled Chiller Path APath B EER (BtuWh) lt150 tons 101 FL97 FL and 137 IPLV158 IPLV ge150 tons 101 FL97 FL and 140 IPLV161 IPLV

Air Cooled Chiller without Condenser Air-cooled chillers without condenser must be rated with matching condensers and comply with air-cooled chiller efficiency requirements

Computer Room Air Conditioner

Computer Room Air Handler Variable Speed Replacing constant speed CRAH with VSD CRAH

Water Cooled Centrifugal Chiller

Water Cooled Positive Displacement or Reciprocating Chiller

Uninterruptible Power Supply Must be Energy Star Certified UPS or have full load efficiency rating

ge948 for 20-100 kVA ge978for ge100 kVA

Mainframe Refresh The rated efficiency of the replacement Mainframes power supply must be at least 8 more

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 42

- Equipment Type Units IncentiveUnit

D1 Air Cooled Chiller Ton $4000 D2 Air Cooled Chiller W ithout Condenser Ton $2000 D3 Computer Room Air Conditioner Ton $3000 D4 Computer Room Air Handler Variable Speed Ton $1000 D5 Water Cooled Centrifugal Chiller Ton $3000 D6 Water Cooled Positive Displacement or Reciprocatin $3000 D7 Uninterruptible Power Supply 20-100 kVA $1000 D8 Uninterruptible Power Supply gt 100 kVA $1000 D9 Mainframe Refresh $2000

D10 Server Refresh $2000 D11 PC Power Managment System $600 D12 HVAC System Optimization $005 D1 3 HoUCold Aisle Containment kWh saved $005 D14 Server Virtualization kW reduction $40000 D1 5 Thin Clients Units $500

efficient compared to the existing Mainframes power supply The replacement Mainframe if Inactive must be decommissioned and removed from the Data Center

Server Refresh Replacement servers must be ENERGY STARreg certified Replacement servers power supply must be 5 more efficiency compared to the power supply of the replaced servers The replaced server must be decommissioned and removed from the data center

HVAC System Optimization Final system must have these features

-Implementation of free cooling by the addition of an economizer system -Conversion of constant speed CRACCRAH into variable speed operations using VFDs and additional control functionalities and -Elevation of exhaust air temperature

HotCold Aisle Containment Includes both Hot and Cold Aisles Installing new containment measures not replacing already existed aisle containment Plenum-only installations not eligible Must result in higher difference between the return air (hot aisle) and supply air (cold aisle) temperatures measured at rack intake and exhaust locations

Server Virtualization Minimum of consolidating 5 Servers virtualized into one Server The virtualized servers if inactive are removed from the Data Center

Thin Clients Must be ENERGY STAR certified thin clients Decommissioned clients are removed from the Data Center

Data Center Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 43

Whole Building Systems Whole Building Systems Approach

The Whole Building Systems approach is intended to encourage integrated energy efficient designs by providing enhanced incentives to the customer who addresses overall energy performance Owners of eligible and qualifying new construction and major renovation projects can receive Whole Building Systems incentives when energy modeling indicates the projectrsquos performance is over 10 better than the ASHRAE 901-2007 Savings from eligible electric end-uses in kilowatt hours define the amount of financial incentive Energy savings achieved through renewable energy sources are not counted toward project energy savings and are not included in the savings basis Incentive reservations obtained during the design phase of a project will be honored for up to 24 months

How to Apply for Whole Building Systems Incentives Before construction begins bull A Pre-notification Application must be submitted documenting the Owners intention to

seek Whole Building Systems incentives bull The Owner must confirm the goals and energy efficiency strategies being pursued by the

design team on the completed Pre-notification Worksheet (Checklist tab) and in the project Summary (Whole Building Performance Summary tab)

bull Submit executable building modeling software files bull Submit the Whole Building Performance Summary worksheet energy simulation model

inputs and outputs and supporting documentation bull Receive confirmation and eligibility notification from the PECO Smart Ideas team and

receive an incentive reservation bull The final incentive paid may differ from the reserved incentive amount The final

incentive will be calculated based on site-verified equipment installation and performance The Owners final application and complete documentation must be received within 6 months of equipment installation or certificate of occupancy whichever is later

bull An executable energy model and model output demonstrating compliance with the criteria of ASHRAE 901-2007 Appendix G will be required and the equipment data sheets LED lighting fixtures must be on the DLC or Energy STAR qualified products list (QPL) to be eligible LED fixtures not on the DLC or Energy STAR QPL has the option of submitting LM79 and LM80 test reports for evaluation against DLC and Energy STAR eligibility criteria

During the construction period bull Owner and design team continue to work closely with their chosen contractor to assure

energy efficiency measures are included and installed in the completed building

When the building is constructed and operational bull Complete the Owner final application Request an equipment verification site visit by the

PECO Smart Ideas team Equipment must be installed and fully operational o Program staff will schedule a site visit and utilize submitted documentation and

measurement tools to verify that the installation follows the submitted energy simulation model

bull When PECO confirms that there are no significant changes to the installed equipment payment of the reserved incentive will be made to the Owner within 6 weeks

bull If changes from the proposed design energy simulation are found the Owner and design team will be notified of the reduced incentive amount a period of 20 calendar days will

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 44

Improvement Incentive per Sq Ft

over Code

~11 to lt20 $0155

~20 to lt30 $0233

~30 to lt40 $0350

~40 to lt60 $0525

~60 $0700

be allowed for supplemental information to be provided if no additional information is received by PECO Smart Ideas team the reduced incentive payments will be made and sent to the Owner if additional clarification and information is available program staff will work diligently to resolve the discrepancies and arrive at a reasonable incentive adjustment with the customer

Payments made by PECO Smart Ideas are final

Customer Eligibility The Owner of the proposed new building project must be a customer of PECO and receive delivery of electric service from PECO to receive kilowatt-hour based incentives Please note that electricity supply can be provided by any vendor

Project Eligibility bull The project must be a new construction or major renovation Major renovations involving

the removal and redesign of at least two building systems (such as interior lighting and mechanical systems) may apply for Whole Building Systems incentives

bull To qualify for incentives projects must demonstrate energy efficiency enhancements that achieve at least 11 improvement in the proposed design versus the standard baseline

bull The Owner must submit a Pre-approval Application to the program at the stage where changes for increased energy efficiency are still feasible and construction has not been completed

bull Projects receiving Whole Building Systems incentives are not eligible to receive other incentives such as the prescriptive or custom program incentives for the same scope

bull Project components that are NOT eligible for consideration as a basis for PECO Smart Ideas include the following o Alternative fuel sources (eg use of gas or oil equipment in lieu of electric) Please note

that combined heat and power (CHP) systems will be incentivized for the electricity they produce

o Renewable energy sources (eg solar wind biomass) bull Ineligible savings include exterior lighting process receptacle miscellaneous loads and

other unregulated end-uses Custom incentives are available for new construction exterior lighting

Whole Building Systems Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 45

Custom Project Specifications Instructions for Energy Savings Calculations for Custom Projects Custom projects must involve measures that result in a reduction in electric energy use (kWh) Electricity savings may result from either efficiency improvements or fuel switching Custom Incentives are based on the first year kilowatt-hour savings Custom applications must be accompanied by detailed engineering calculations that document the annual total energy savings

The following serve as guidelines for the minimum required documentation

Equipment Information Submittals bull A list of the present and proposed equipment and components to be installed

including manufacturerrsquos catalogmodel number bull Manufacturerrsquos specification sheets showing capacities and performance for all major

components

Energy Savings Calculations Provide calculations documenting the predicted energy consumption of the existing (or baseline) and proposed system using appropriate analytical tools and clearly stated assumptions Calculations may be performed by ldquohandrdquo but spreadsheet analysis or more rigorous modeling is preferred All analysis should be provided in electronic format All assumptions such as operating hours existing and proposed equipment operational details must be presented Engineering algorithms and procedures from recognized technical organizations such as ASHRAE SMACNA ANSI etc must be used Use rated performance factors tested under accepted procedures specified by recognized rating agencies such as AHRI ANSI ASTM etc Provide an explanation when equipment performance rating conditions vary from standard conditions

In support of the calculations extensive documentation must be provided that provides the basis for the savings estimates The documentation must provide information on the equipment operating schedule daily and seasonal load profile and baseline AND energy efficient equipment performance at the operating loads Typical documentation for custom projects often includes bull Engineering or architectural drawings and ldquoequipment schedulerdquo sheets bull Component specification sheets that include part load efficiency or performance

factors bull Spreadsheet calculations or inputoutput files and results from system modeling or

other engineering analysis using accepted engineering algorithms and practices bull Log sheets trend logs from a building management system or other operating

documentation that are often necessary to document operating hours and equipment loading and used as a basis for the calculations (in some cases short term monitoring may be required to document the load profile)

bull Control sequence of operations that are necessary where controls play a part in the savings equation

Additional documentation other than that described in the application may be required for program participation Larger projects may also require pre- and post-project sub metering or monitoring of loads andor power input as part of another measurement and verification activity to demonstrate the actual energy savings that are realized

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 46

Baseline for Custom Analysis Where equipment is replaced prior to the end of its rated service life in order to achieve energy savings the existing equipment performance may be used as the baseline in the energy savings calculations Where equipment is replaced due to failure or for other reasons (such as obsolescence or a need for more capacity) the baseline performance used in the savings calculation should be either the minimum performance that would be required by code for that equipment type and application (where a code applies) or the performance of the equipment that would have been selected as the customers standard practice when a code does not apply

Baseline or Existing System Summary On custom worksheet on application form include make model number name plate information (such as operating voltage and rated full load amps) rated capacity quantities equipment condition and age facility operating hours equipment operating schedule and load curves If needed attach separate sheets

All decisions regarding incentives for custom projects are in the sole discretion of PECO

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 47

APPENDIX PROGRAM UPDATES SUMMARY (Q1 2017) Multifamily Nursing Home and Assisted Living retrofit customers need to apply for incentives through the PECO Smart Ideas Multi-Family Program administered by Franklin Energy For more information please contact Taylor Adler at tadlerfranklinenergycom or call 1-844-4BIZ-SAVE Multifamily Nursing Home and Assisted Living new construction customers can proceed with applying for incentives here

Revised Incentives

Data Centers

Measure Incentive Effective Immediately Previous Incentive

Air-cooled chiller for data centers $40ton $10ton Air-cooled chiller without condenser for data centers $20ton $10ton

Computer room air conditioner $30ton $7ton Water-cooled centrifugal chiller for data centers $30ton $5ton Water-cooled positive displacement or reciprocating chiller for data centers

$30ton $5ton

Uninterruptible power supply 20-100 kVA $10kVA $6kVA Uninterruptible power supply gt100 kVA $10kVA $1kVA Mainframe refresh $20kW installed $5kW installed Server refresh $20kW installed $4kW installed Server virtualization $400kW reduction $4kW reduction Thin clients $5units $4units

Lighting (Effective Immediately)

Measure Incentive Effective Immediately Specification Previous

Incentive Specification

New construction exterior LED outdoor flood light LED parking garage and canopy lighting LED polearm mounted parking and roadway lighting LED wall mount fixture

$005kWh (custom)

Lighting Power Density (LPD) Requirements Unchanged

$10-54 fixture

Lighting Power Density (LPD) (Wft2) by Space Type or Building Area

LED Replacement Lamps (Tubes) 2

$250lamp 5 Min Watts Reduced

$250lamp 6 Min Watts Reduced

LED Replacement Lamps (Tubes) 4

$400lamp 10 Min Watts Reduced

$400lamp 12 Min Watts Reduced

Permanent Fixture Removal $010Watt removed

Clarification of calculation to represent actual Wattage removed

$010Watt removed

Lighting (Effective 6117)

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 48

Measure Incentive Effective 6117 Specification Previous

Incentive Previous Specification

Interior LED high-bay fixtures andor retrofit kits if lt 20000 LED Lumens

$50fixture 150 Min Watts Reduced

$75fixture 150 Min Watts Reduced

Interior LED high-bay fixtures andor retrofit kits if gt 20000 LED Lumens

$75fixture 225 Min Watts Reduced

$75fixture 150 Min Watts Reduced

New Incentives

Compressed Air

Measure New Incentive Effective Immediately Variable speed air compressor $30compressor HP Compressed air system optimization $50compressor HP

HVAC

Measure New Incentive Effective Immediately ECM circulation pump $50pump Retro-commissioning cooling systems $750ton Retro-commissioning whole building $010square foot Energy management system $25ton Demand controlled ventilation $25ton Water-cooled air conditioner $22ton

Food Service

Measure New Incentive Effective Immediately Combination oven $200unit ENERGY STARreg commercial convection oven $150unit ENERGY STARreg commercial fryers $100unit ENERGY STARreg commercial hot holding cabinet $200unit

Refrigeration

Measure New Incentive Effective Immediately Air-cooled refrigeration condenser $10ton Oversized condenser with VFD $10ton Case light occupancy controls $750door

Lighting

Measure New Incentive Effective Immediately Interior central lighting controls $00175sq foot

Motors and Drives

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 49

-

Measure New Incentive Effective Immediately VFD for dust collection system motor $50HP

Application Clarifications and Revised Requirements

Clarification of LED Eligibility for New Construction or Retrofit Projects

LED Eligibility is determined by whether lighting products are listed in either the DesignLights Consortium (DLC) Qualified Products List of commercial-grade LED luminaires or the US Environmental Protection Agency database of ENERGY STAR certified products For products not yet listed contractors may submit LM79 and LM80 test reports PECO Smart Ideas engineers will review test reports to determine if the product in question meets performance specifications

Revised W 9 Requirement

W-9 forms EIN numbers are no longer required

Deletion of erroneous statement in New Construction Lighting

The following statement from previous Business Manual has been deleted ldquoThe minimum lighting power density used to calculate the incentive shall be no lower than 50 of the ASHRAE 901-2007 valuerdquo

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 50

  • Commercial amp Industrial Program Application Manual
    • Follow This Easy Process
      • Pre-Approval Application Checklist
      • Final Application Checklist
          • Terms and Conditions
            • Program Effective Dates
            • Program and Project Eligibility
            • Incentive Payment Limits
            • Application Review Process
            • Inspections andor PUCrsquos Statewide Program Evaluation
            • Requirements for Custom Project Electricity Savings Calculation
            • Tax Liability
            • No Endorsement
            • Warranties
            • Limitation of Liability
            • Assignment
            • Customerrsquos Certification
            • Termination
            • Acknowledgement
              • Retrofit Lighting Solutions
                • General Linear Fluorescent Lamp and Ballast Specification Requirements
                • LED Lamps and Fixtures
                • Minimum Watts Reduced
                • Linear LED (Tubes)
                • Permanent Fixture Removal
                  • LED Traffic Signals
                    • LED Traffic Signals Incentive Table
                      • New Construction Lighting Specifications
                        • New Construction Lighting Incentives Table
                          • New Construction Lighting Power Density Code
                              • Exterior New Construction Lighting
                              • HVAC Equipment
                                • Air-Source Air Conditioners and Air-Source Heat Pumps
                                • Package Terminal Systems (Replacements)
                                • Ductless Mini-Split Heat Pump lt54 Tons
                                • Geothermal Heat Pump
                                  • Other HVAC Equipment
                                    • Hotel Guest Room Occupancy Sensor
                                    • ECM Circulation Fan
                                    • ECM Circulation Pump
                                    • Retrocomissioning Cooling Systems
                                    • Retrocomissioning Whole Building
                                    • Energy Management System
                                    • Demand Controlled Ventilation
                                    • Other HVAC Incentives Table
                                      • Unitary HVAC Chillers
                                        • Air-Cooled Chillers Water Cooled Positive Displacement Reciprocating Chillers and Water Cooled Centrifugal Chillers
                                          • Refrigeration
                                            • Anti-Sweat Heater Controls
                                            • Evaporator Fan Controls
                                            • Floating Head Pressure Controls
                                            • Automatic Door Closers for Walk-In Coolers and Freezers
                                            • EC Motor for Walk-inReach-in Refrigerated cases or Freezer cases
                                            • ENERGY STAR Solid Door Freezer and Glass Door Freezer and Refrigerators
                                            • Refrigeration Suction Pipe Insulation
                                            • Night Cover
                                            • Strip Curtain on Walk-In CoolerFreezer
                                            • Evaporator Coil Defrost Control
                                            • Variable Speed Refrigeration Compressor
                                            • Add Doors to Open Refrigerated Cases
                                            • Door Gaskets
                                            • Zero Energy Doors
                                            • Air Cooled Refrigeration Condenser
                                            • Oversized Condenser with VFD
                                            • Case Light Occupancy Controls
                                            • LED Open Case Lighting
                                            • LED Enclosed Case Lighting Refrigerated
                                            • LED Enclosed Case Lighting Freezer
                                              • Food Service
                                                • Beverage and Snack Machine Controls
                                                • ENERGY STARreg Refrigerated Beverage Vending Machines
                                                • ENERGY STARreg Electric Steam Cooker
                                                • ENERGY STARreg Electric Combination Oven
                                                • ENERGY STARreg Commercial Convection Oven
                                                • ENERGY STARreg Commercial Fryers
                                                • ENERGY STARreg Commercial Hot Holding Cabinet
                                                  • Motors and Variable Frequency Drives
                                                    • Early Replacement Motors
                                                    • Variable Frequency Drives on HVAC Fan Applications
                                                    • Variable Frequency Drives on Pump Applications
                                                    • Variable Speed Control for Kitchen Exhaust Hoods
                                                    • Variable Speed Drives for Process or Other Equipment
                                                      • Domestic Hot Water
                                                        • Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater
                                                        • Heat Pump Water Heater
                                                        • Low Flow Pre-Rinse Spray Valve
                                                        • Domestic Hot Water Incentive Table
                                                          • Compressed Air Systems
                                                            • No-loss Condensate Drain
                                                            • Air-Entraining air nozzle
                                                            • Storage Tanks for LoadNo Load Screw Compressors
                                                            • Cycling Refrigerated Thermal Mass Dryer
                                                            • Variable Speed Air Compressor
                                                            • Compressed Air System Optimization
                                                            • Compressed Air Systems Incentive Table
                                                              • Data Centers
                                                                • Air Cooled Chiller
                                                                • Air Cooled Chiller without Condenser
                                                                • Computer Room Air Conditioner
                                                                • Computer Room Air Handler Variable Speed
                                                                  • Replacing constant speed CRAH with VSD CRAH
                                                                    • Water Cooled Centrifugal Chiller
                                                                    • Water Cooled Positive Displacement or Reciprocating Chiller
                                                                    • Uninterruptible Power Supply
                                                                    • Mainframe Refresh
                                                                    • Server Refresh
                                                                      • Whole Building Systems
                                                                        • Whole Building Systems Approach
                                                                        • How to Apply for Whole Building Systems Incentives
                                                                        • Customer Eligibility
                                                                        • Project Eligibility
                                                                        • Whole Building Systems Incentives Table
                                                                          • Custom Project Specifications
                                                                            • Instructions for Energy Savings Calculations for Custom Projects
                                                                            • Equipment Information Submittals
                                                                            • Energy Savings Calculations
                                                                            • Baseline for Custom Analysis
                                                                            • Baseline or Existing System Summary

Contents Commercial amp Industrial Program Application Manual 5

Terms and Conditions 7

Retrofit Lighting Solutions 11

General Linear Fluorescent Lamp and Ballast Specification Requirements 11

LED Lamps and Fixtures 11

Minimum Watts Reduced 11

Linear LED (Tubes) 11

Permanent Fixture Removal 12

LED Traffic Signals 19

LED Traffic Signals Incentive Table 19

New Construction Lighting Specifications 20

New Construction Lighting Incentives Table 20

Exterior New Construction Lighting 23

HVAC Equipment 24

Air-Source Air Conditioners and Air-Source Heat Pumps 24

Package Terminal Systems (Replacements) 25

Ductless Mini-Split Heat Pump lt54 Tons 25

Geothermal Heat Pump 25

Other HVAC Equipment 27

Hotel Guest Room Occupancy Sensor 27

ECM Circulation Fan 27

ECM Circulation Pump 27

Retrocomissioning Cooling Systems 27

Retrocomissioning Whole Building 27

Energy Management System 28

Demand Controlled Ventilation 28

Other HVAC Incentives Table 29

Unitary HVAC Chillers 30

Air-Cooled Chillers Water Cooled Positive Displacement Reciprocating Chillers and Water Cooled Centrifugal Chillers 30

Refrigeration 32

Anti-Sweat Heater Controls 32

Evaporator Fan Controls 32

Floating Head Pressure Controls 32

Automatic Door Closers for Walk-In Coolers and Freezers 32

EC Motor for Walk-inReach-in Refrigerated cases or Freezer cases 32

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 2

ENERGY STAR Solid Door Freezer and Glass Door Freezer and Refrigerators 32

Refrigeration Suction Pipe Insulation 33

Night Cover 33

Strip Curtain on Walk-In CoolerFreezer 33

Evaporator Coil Defrost Control 33

Variable Speed Refrigeration Compressor 33

Add Doors to Open Refrigerated Cases 33

Door Gaskets 33

Zero Energy Doors 34

Air Cooled Refrigeration Condenser 34

Oversized Condenser with VFD 34

Case Light Occupancy Controls 34

LED Open Case Lighting 34

LED Enclosed Case Lighting Refrigerated 34

LED Enclosed Case Lighting Freezer 34

Food Service 36

Beverage and Snack Machine Controls 36

ENERGY STARreg Refrigerated Beverage Vending Machines 36

ENERGY STARreg Electric Steam Cooker 36

ENERGY STARreg Electric Combination Oven 36

ENERGY STARreg Commercial Convection Oven 36

ENERGY STARreg Commercial Fryers 36

ENERGY STARreg Commercial Hot Holding Cabinet 36

Motors and Variable Frequency Drives 38

Early Replacement Motors 38

Variable Frequency Drives on HVAC Fan Applications 38

Variable Frequency Drives on Pump Applications 38

Variable Speed Control for Kitchen Exhaust Hoods 38

Variable Speed Drives for Process or Other Equipment 38

Domestic Hot Water 39

Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater 39

Heat Pump Water Heater 39

Low Flow Pre-Rinse Spray Valve 39

Domestic Hot Water Incentive Table 39

Compressed Air Systems 40

No-loss Condensate Drain 40

Air-Entraining air nozzle 40

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 3

Storage Tanks for LoadNo Load Screw Compressors 40

Cycling Refrigerated Thermal Mass Dryer 40

Variable Speed Air Compressor 40

Compressed Air System Optimization 41

Compressed Air Systems Incentive Table 41

Data Centers 42

Air Cooled Chiller 42

Air Cooled Chiller without Condenser 42

Computer Room Air Conditioner 42

Computer Room Air Handler Variable Speed 42

Replacing constant speed CRAH with VSD CRAH 42

Water Cooled Centrifugal Chiller 42

Water Cooled Positive Displacement or Reciprocating Chiller 42

Uninterruptible Power Supply 42

Mainframe Refresh 42

Server Refresh 43

Whole Building Systems 44

Whole Building Systems Approach 44

How to Apply for Whole Building Systems Incentives 44

Customer Eligibility 45

Project Eligibility 45

Whole Building Systems Incentives Table 45

Custom Project Specifications 46

Appendix Program Updates Summary (Q1 2017) 48

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 4

PECO Smart Ideas for Your Business

Commercial amp Industrial Program Application Manual

Program is offered and incentive values and measures contained in this application are valid from June 1 2016 to May 31 2021 or until funds are exhausted

Incentive values and measures may be modified or terminated at any time without prior notice

Follow This Easy Process

Step 1 Verify your Eligibility Applicant must verify that they are a business customer of PECO (commercial industrial

governmental institutional and non-profit) Multifamily applicants may also apply Detailed information is posted on wwwpecocomsmartideas

Project must be a new facility improvement that results in an improvement in electric energy efficiency (kWh) andor a permanent reduction in electric energy usage

All equipment must be installed in facilities served by PECO with a valid PECO account number on an eligible PECO non-residential rate

Refer to the technical specifications in this Application Manual to check eligibility of equipment for incentives

Step 2 Submit Pre-approval Application to Reserve Funds

A pre-approval application must be submitted before you purchase equipment or technology for which the incentive is being requested Applications can be submitted via online mail email or fax

Email pecosmartideasdnvglcom

Mail PECO Smart Ideas for Your Business

4377 County Line Road Chalfont PA 18914

Fax

215-996-3982

Incentive funds will be reserved when your prendashapproval application is approved Complete the Applicant Information form for each of the measures that you are installing

Lighting projects require a lighting worksheet and inventory to be completed in addition to the application form You may submit the application via mail fax or e-mail

For some projects a pre-installation inspection will be required Most projects require documentation of the equipment being replaced

Incentive funds are reserved for 90 days Contact the PECO Smart Ideas team for specific questions regarding funding reservations and extensions

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 5

Step 3 Install Equipment or Perform Project Work The equipment installed must meet or exceed the specifications and requirements found

in measures tables and detailed in the Application Manual Equipment must be installed within the program period

Step 4 Submit Final Application Submit a final application as soon as possible after the project is completed within 90 days of

project completion but no later than May 15 2021 The final application is the same form as the pre-approval application Include the following documentation with your final application customercontractor information a signed final application agreement itemized invoices specifications and an updated scope of work

The program team will review your final application For some projects a final inspection will be part of the final review

The program team will send incentive checks four to six weeks after your final application is approved

If you need assistance please contact our program hotline 866-371-9343

Please visit our website wwwpecocomsmartideas

Pre-Approval Application Checklist Final Application Checklist

Registration Number on Application Signed Final Agreement Form (if applicable) Itemized Invoices

Documentation of existing equipment for Equipment SpecificationsCut Sheets for retrofit projects changes in equipment

Lighting worksheet for lighting projects Certificate of Occupancy (for New Equipment SpecificationsCut Sheets Construction projects only)

Updated Scope if project changed (please Copy of Current PECO Bill advise program staff during installation if Customer Signature on Customer

Acknowledgement scope changes Increase in incentive amount is not guaranteed)

Supporting Documentation Guidelines

Lighting Please attempt to submit photos of existing lighting Projects gt750000 kWh require lighting logging data DLCENERGY STAR certification documentation submittal will streamline review process Plansengineering submittals will be requested for large projects Square footage for centrally-controlled lighting control systems may be required

VFDs Nameplate photos andor engineering schedules of existing motors

Custom or lsquolargersquo (gt250000 KWh) mechanical projects MampV plan will be required for larger projects Program engineers will contact participants to establish MampV protocols

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 6

Terms and Conditions

PECO Energy Company (PECO) is offering prescriptive and custom incentives under the PECO Smart Ideas for Your Business to facilitate the implementation of cost-effective energy efficiency measures for commercial and industrial customers Any and all energy savings or environmental credits generated by the project described in this application will be retained by PECO

Funds are limited and subject to availability The program may be modified or terminated without prior notice

Program Effective Dates

The program is available until May 31 2021 The current cycle year runs from June 1 2016 through May 31 2017 (lsquoProgram Year Eightrsquo) Incentives are offered until approved funds are exhausted or until May 15 2021 whichever comes first All projects must be completed and the final applications received no later than May 15 2021 to be eligible for incentives

Program and Project Eligibility

Smart Ideas for Your Business incentives are available for the common energy efficiency measures listed in this Application Manual Program incentives are available under PECO Smart Ideas for Your Business to non-residential customers within PECOs service territory These incentives are available to all customers who pay into the Energy Efficiency Charge and receive their electricity over PECOrsquos distribution network regardless of the retail electric supplier

Most commercial projects involving energy savings are eligible Incentives are available for both prescriptive and custom measures Prescriptive measures are energy efficiency measures with pre-determined savings and incentive levels and are paid on a per unit basis These measures are available for specific Lighting HVAC Refrigeration and Food Service Variable SpeedFrequency Drives Compressed Air and Domestic Water Heater measures Custom measures include energy efficiency measures not listed on the prescriptive application forms Custom incentives must be approved by PECO in advance are determined on a case-by-case basis and are paid per unit of energy (kWh) saved Examples of projects that are NOT eligible for PECO Smart Ideas for Your Business include onndashsite electricity generation projects focused primarily on power factor improvement and renewable energy projects

Installation must be at the customerrsquos facility and provide 100 of the energy benefits as stated in the application for a period of five years or for the life of the product whichever is less PECO has the right to claim a pro-rated amount of any incentive paid if the customer ceases to be a distribution customer of PECO or removes the equipment or systems at any time during the five-year period or the life of the measure

Incentive Payment Limits

Prescriptive and custom incentives cannot exceed 100 of the customerrsquos total costs Contractor labor costs can be considered in the total project cost while customer internal labor costs cannot

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 7

Application Review Process

Pre-approval is required for all projects A pre-approval application must be submitted before you purchase equipment or technology for which the incentive is being requested Pre-approval is not a guarantee of program acceptance Completed applications will be reviewed in the order received The location or business name on the invoice must be the same as the application information The incentive is reserved for the project when PECO receives a complete preshyapproval application and determines that the project meets the program eligibility requirements Applicants who submit incomplete applications will be notified of deficiencies upon review of the application and could lose their place in line in the review process until all requested information is received Applicants are encouraged to call the program hotline if they have any questions about documentation requirements

PECO will review final applications for eligibility and completeness The final application and all required supporting documentation must be received within 90 days of project completion but no later than May 15 2021 to be eligible for incentives Project documentation including original dated invoices for the purchase and installation of the measures andor product specification sheets is required

The project invoice must provide sufficient detail to separate the project cost from the cost of other services such as repairs and building code compliance PECO reserves the right to request additional supporting documentation necessary to ensure measure eligibility and verify that the expected energy savings will occur Requested information may include but is not limited to equipment purchase dates installation dates proof that the equipment is operational manufacturer specifications warranty information and proof of customer co-payment PECO will make every effort to maintain the confidentiality of customer information except that such information must be provided to the PA PUC and its contractor as well as PECOrsquos contractor for measurement and evaluation

The installed measures are not eligible for incentives from other PA Act 129 Phase 3 Energy Efficiency Programs

Inspections andor PUCrsquos Statewide Program Evaluation

PECO its agents measurement and verification contractor andor the PUC statewide program evaluator have the right to audit or inspect all projects to verify compliance with the program rules and verify the accuracy of project documentation This may include pre-installation andor post-installation inspections detailed lighting layout descriptions metering data collection interviews and utility bill data analyses The customer must allow access to project documents and the facility where the measures were installed for a period of five years after receipt of incentive payment by PECO

Requirements for Custom Project Electricity Savings Calculation

The annual electricity savings must be calculated for custom projects using industry accepted engineering algorithms or simulation models The applicant must estimate the annual electricity usage of both the existing and proposed equipment based on the current operation of the facility If the existing equipment is at the end of its rated useful life the applicant must substitute equipment that would meet the applicable federal and local energy codes as the baseline when calculating the annual energy savings The applicant must be able to clearly describe the method used to calculate the savings The applicant must provide all assumptions used in the calculations and document the source for these assumptions Further information on custom measures can be found in the Application Manual which can be downloaded from

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 8

wwwpecocomsmartideasThe method and assumptions used by the applicant to calculate the annual savings will be reviewed by PECO PECO has sole and final determination of the annual energy savings to be used in calculating the incentive amount PECO also reserves the right to require specific measurement and verification activities including monitoring both before and after the retrofit and to base the incentive payment on the results of these activities

PECO may need to conduct inspections both before and after the retrofit projects to verify equipment and operation conditions Pre-approval application must be submitted while the existing equipment is still in operation in order to allow PECO the opportunity to view the existing equipment

Tax Liability

Incentives may be taxable for most taxpayers If the incentive is more than $600 it will be reported to the IRS and the customer will be provided with an IRS form 1099 unless the customer is exempt PECO is not responsible for any tax liability that may be imposed on any customer as a result of the payment of program incentives All customers must supply their Federal Tax Identification number to PECO in order to receive a Program Incentive Please consult with your tax professional for information on the tax treatment of the incentives

No Endorsement

PECO does not endorse support or recommend any particular manufacturer product or system design in promoting this program and PECO does not guarantee any specific level of energy savings with respect to any product system design or energy efficiency measure

Warranties

PECO DOES NOT WARRANT THE PERFORMANCE OF INSTALLED EQUIPMENT ANDOR SERVICES RENDERED AS PART OF THIS PROGRAM EITHER EXPRESSLY OR IMPLICITLY NO WARRANTIES OR REPRESENTATIONS OF ANY KIND WHETHER STATUTORY EXPRESSEDOR IMPLIED INCLUDING WITHOUT LIMITATIONS WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE REGARDING EQUIPMENT OR SERVICES PROVIDED BY A MANUFACTURER OR VENDOR CONTACT YOUR VENDORSERVICES PROVIDER FOR DETAILS REGARDING PERFORMANCE AND WARRANTIES

Limitation of Liability

By virtue of participating in this program customers agree to waive any and all claims or damages against PECO except the receipt of the program incentive if eligible Participating Customers agree that PECOrsquos liability in connection with this program is limited to paying the program incentive specified Under no circumstances shall PECO its representatives agents or subcontractors be liable for any lost profits special punitive consequential or incidental damages or for any other damages or claims connected with or resulting from participation in this program

Assignment

Customers may assign a portion or all of their program incentive payment to a specified vendor

Customerrsquos Certification Customer certifies that heshe purchased and installed the equipment listed in the application Customer agrees that all information is true and that heshe has conformed to all of the program and equipment requirements listed in the application

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 9

Termination

PECO reserves the right to extend modify (this includes modification of program incentive levels) or terminate this program without prior or further notice

Acknowledgement

I have read understood and am in compliance with all rules and regulations concerning this incentive program I certify that all information provided is correct to the best of my knowledge and I give PECO permission to share my records with the Pennsylvania PUC and agents representatives and contractors it selects to manage coordinate or evaluate the program Additionally I hereby authorize PECO to have reasonable access to my property to inspect the installation and performance of the equipment and installations that are eligible for incentives under the guidelines of the program

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 10

Retrofit Lighting Solutions

General Linear Fluorescent Lamp and Ballast Specification Requirements 32w 4ft HPT8 and reduced wattage T8 lamps must be listed on the Consortium of Energy Efficiency (CEE) product list or must meet CEE standards For further information visit wwwcee1org

LED Lamps and Fixtures The integral lamp or fixture must appear on the Energy Star Qualified Products List or the Design Lights Consortium Qualified Products List

bull Energy Star Qualified Fixture Product List httpwwwenergystargov bull Energy Star Qualified Integral LED lamps httpwwwenergystargov bull Design Lights Qualified Product List httpwwwdesignlightsorg

Minimum Watts Reduced Energy efficient fixtureslamps are required to be lower in load than existing fixtureslamps by specified levels the Minimum Watts Reduced Each lighting measure has its own Minimum Watts Reduced that must be met as eligibility requirement These levels are listed in the lighting worksheet ldquoLighting Incentives Tablersquo tab and reproduced below

Linear LED (Tubes) Linear LED lamps must be listed on the Design LightsTM Consortium (DLC) Qualified Products List

Type A LEDs bull Type A LED linear lamps are powered by a fluorescent ballast bull If present existing magnetic ballast must be removed and replaced with a compatible energy- efficient electronic ballast bull DLC Primary Use Requirement ndash DLC-listed equipment must be classified with one of the following Primary Use designations

o Replacement Lamps (Plug and Play) (UL Type A) bull Label must be affixed to the interior of fixture in a prominent location Label should indicate that the fixture has been retrofitted with

TLEDs and that fluorescent lamps should not be installed as replacements

Type B LEDs bull Type B LED tubes are powered by an internal driver bull Existing fluorescent ballast must be removed and fixturersquos incoming power wires are connected directly to the lamp sockets Strict

adherence to installation instructions is critical when rewiring existing fixtures

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 11

bull The LED linear lamps must be delivered as part of a UL 1598C Classified Luminaire Retrofit Kit with instructions explaining the LED linear lamps must be installed on a luminaire that is already UL Listed

bull The retrofitted luminaire must be clearly identified using the label included with the Retrofit Kit indicating that the luminaire has been modified and can no longer operate the originally intended fluorescent lamp(s)

Type C LEDs

bull Type C LED linear lamps are powered by an external driver bull Existing fluorescent ballast must be removed and replaced with a compatible external driver bull DLC Primary Use Requirement ndash DLC-listed equipment must be classified with one of the following Primary Use designations

o 2-lamp External Driver Lamp-Style Retrofit Kits (UL Type C) o 3-lamp External Driver Style Retrofit Kits (UL Type C) o 4-lamp External Driver Lamp-Style Retrofit Kits (UL Type C)

bull Technical specifications (manufacturerrsquos cut sheet) for the driver must be submitted with the application

Permanent Fixture Removal This measure is to be used only in conjunction with lighting retrofits and is intended for spaces that are currently over lit Incentives are paid $010watt reduced only on fixtures removed not on total watts reduced for entire projects Overall net lumen reduction must be achieved in order to qualify for a permanent fixture removal incentive

Example

(20) Existing fixtures at 10000 lumens each = 200000 lumens

(14) Proposed fixtures at 15000 lumens each = 210000 lumens

Since there is not a net reduction in lumens the six fixtures removed would not be eligible for a permanent fixture removal incentive

It is encouraged that spaces meet recommended foot-candle levels as detailed by IESNA Lighting Design Guide A Program Engineer will evaluate lumens reduction based on the type of fixtures removed and the DLC lumens rating of the fixtures installed

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 12

RETROFIT INTERIOR LIGHTING TABLE

Measure Code

Min Measure Name Watts Incentive Unit

Reduced Technical Specifications

CFL Lighting

CFL1A ENERGY STAR Hard-Wired CFL fixture Indoor AccentTrack 20 $250 lamp

Only complete new fixtures or modular hardwired retrofits with hardwired electronic ballasts qualify

CFL ballast must be programmed start or programmed rapid start with a power factor (PF) ge 090 and a total

harmonic distortion (THD) le 20 Screw-in CFLs are not eligible for this incentive

CFL1B ENERGY STAR Hard-Wired CFL fixture Indoor Directional WallCeiling Mount 20 $250 lamp

CFL1C ENERGY STAR Hard-Wired CFL fixture Indoor Omni-Directional WallCeiling Mount 20 $250 lamp

CFL2A ENERGY STAR Hard-Wired CFL fixture Indoor Portable LampTorchiere 20 $1 lamp

CFL2B ENERGY STAR Hard-Wired CFL fixture Indoor Recessed Downlight 20 $1 lamp

CFL2C ENERGY STAR Hard-Wired CFL fixture Indoor Recessed Downlight Retrofit Module 20 $1 lamp

CFL2D ENERGY STAR Hard-Wired CFL fixture Indoor Under CabinetStrip 20 $1 lamp

CFL3A ENERGY STAR Hard-Wired CFL fixture Outdoor Directional WallCeilingGroundPole Mount 30 $3 lamp

CFL3B ENERGY STAR Hard-Wired CFL fixture Outdoor Omni-Directional WallCeilingGroundPole Mount 30 $3 lamp

CFL3C ENERGY STAR Hard-Wired CFL fixture Outdoor Recessed Downlight 30 $3 lamp

CFL3D ENERGY STAR Hard-Wired CFL fixture Outdoor Recessed Downlight Retrofit Module 30 $3 lamp

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 13

Fluorescent Lighting FL1 Interior T5 New Fluorescent Fixture w Electronic Ballast 11 $5 fixture Any T5 is eligible

FL2 T5HO High-Bay Fixture 54 $25 fixture Fixture efficiency must be gt 90

High bay fixtures must be installed at least 15ft above finished floor

FL3 HPT8 High-Bay Fixture 82 $20 fixture Must use High Ballast Factor (gt96) Fixture efficiency must be gt= 85

High bay fixtures must be installed at least 15ft above finished floor

FL4 HPT8 Fixture 20 $5 fixture Must use Low Ballast Factor (lt80)

FL5 RW T8 Lamp - Lamp only 10 $3 lamp Existing T8 fixture re-ballasting to a higher ballast factor are not eligible

HID Measures HID1 Ceramic HID - 25 -39 Watt 95 $13 fixture

Replacing higher wattage HID or High Pressure Sodium or Mercury Vapor

Interior replacements only

HID2 Ceramic HID - 70 Watt 155 $13 fixture HID3 Ceramic HID - 100 Watt 170 $15 fixture HID4 Pulse Start HID - 150 nominal Watts 72 $10 fixture HID5 Pulse Start HID - 350 nominal Watts 100 $13 fixture

HID6 Pulse Start HID - 1000 nominal Watts 400 $15 fixture

Interior LED Fixtures

LED1 ENERGY STAR Integral LED fixture Indoor Recessed Downlight Retrofit Module 38 $7 fixture Retrofit module of existing recessed fixture

LED2 ENERGY STAR Integral LED fixture Indoor Recessed Downlight 38 $7 fixture

New indoor recessed downlight fixture LED3 ENERGY STAR Integral LED fixture Indoor Portable LampTorchiere 30 $7 fixture

LED4 LED AccentTrack Lighting Fixtures 32 $6 head

LED5 LED Low-Bay Fixtures 150 $20 fixture For replacement of HID fixtures mounted le 15 above finished floor

LED6 LED Low-Bay Retrofit Kits 150 $20 fixture

LED8 LED Troffer Fixtures and Retrofit Kits 5 $10 fixture Troffers typically installed in lay-in ceilings 2x2 2x4 configuration

LED9 LED Surface and Suspended Linear Fixtures 25 $10 fixture Examples of LED surface-mounted luminaires include wrap vapor tight and strip fixtures (non-cooler)

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 14

-

Interior LED High Bay Fixtures

LED10A LED High-Bay Fixtures le 20000 LED lumens 150 $50 fixture

High bay fixtures must be installed at least 15ft above finished floor

LED10B LED High-Bay Fixtures gt 20000 LED lumens 225 $75 fixture

LED11A LED High-Bay Retrofit Kits le 20000 LED lumens 150 $50 fixture

LED11B LED High-Bay Retrofit Kits gt20000 LED lumens 225 $75 fixture

LED Parking Garage and Canopy Fixtures

LED12 LED Parking Garage and Canopy Fixtures and Retrofit Kits Outdoor lt= 5000 LED lumens 50 $15 fixture

Fixtures must be physically installed in a parking garage (area where vehicles are physically parked) or

fuel pump canopy Typically represents replacement of le175 W Metal

Halide or equivalent

LED13 LED Parking Garage and Canopy Fixtures and Retrofit Kits Outdoor 5001 - 10000 LED lumens 70 $30 fixture

Typically represents replacement of Metal Halide or equivalent greater than 175W and less than 400W

Product must be installed in a parking garage (area where vehicles are physically parked) or fuel pump

canopy

LED14 LED Parking Garage and Canopy Fixtures and Retrofit Kits Outdoor gt 10000 LED lumens 150 $50 fixture

Typically represents replacement of ge400 W Metal Halide or equivalent

Product must be physically installed in a parking garage (area where vehicles are physically parked) or

fuel pump canopy LED Screw in Lamps

ESLED1 ENERGY STAR Screw-in LED Bulb (Decorative Globe) 14 $5 lamp Lamp with globe shape such as type G

ESLED2 ENERGY STAR Screw-in LED Bulb (Decorative non-globe 14 $5 lamp Lamps with non-globe or candle-like shape such as type B C CA F

ESLED3 ENERGY STAR Screw-in LED Bulb and Low Voltage Mini-Reflector Bulbs (DirectionalReflector) 14 $5 lamp ANSI standard PAR and MR type lamps

ESLED4 ENERGY STAR Screw-in LED Bulb (Standard) 14 $5 lamp Lamp such as A series

ESLED5 ENERGY STAR Screw-in LED Bulb (Standard 3-Way) 14 $5 lamp Lamp such as A series with three light levels

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 15

- -LED Screw in Lamps Smart Bulbs

ESLED6 ENERGY STAR Screw-in LED Bulb (Decorative Globe Smart Bulb) 14 $5 lamp Lamp with globe shape such as type G

ESLED7 ENERGY STAR Screw-in LED Bulb (Decorative non-globe Smart Bulb) 14 $5 lamp Lamps with non-globe or candle-like shape such as

type B C CA F

ESLED8 ENERGY STAR Screw-in LED Bulb (DirectionalReflector Smart Bulb) 14 $5 lamp ANSI standard PAR lamps

ESLED9 ENERGY STAR Screw-in LED Bulb (Standard Smart Bulb) 14 $5 lamp Lamp such as A series

LED Tubes (replacing fluorescent)

TLED1 LED Replacement Lamps (Tubes) 2 5 $250 lamp Refer to Lighting Technical Specifications for requirements DLC Type A B and C are eligible bullType B linear (Interior driver) LEDs have the following installation requirements

bullExisting fluorescent ballast must be removed and fixturersquos incoming power wires are connected directly to the lamp sockets Strict adherence to installation instructions is critical when rewiring existing fixtures bullThe LED linear lamps must be delivered as part of a UL 1598C Classified Luminaire Retrofit Kit with instructions explaining the LED linear lamps must be installed on a luminaire that is already UL Listed bullThe retrofitted luminaire must be clearly identified using the label included with the Retrofit Kit indicating that the luminaire has been modified and can no longer operate the originally intended fluorescent lamp(s)

TLED2 LED Replacement Lamps (Tubes) 4 10 $4 lamp

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 16

LED Exterior Lighting

ELED1 ENERGY STAR Integral LED fixture Outdoor Recessed Downlight Retrofit Module 24 $10 module

ENERGY STAR or DLC Qualified fixtures ELED2 ENERGY STAR Integral LED fixture Outdoor Recessed

Downlight 24 $10 fixture

ELED3 LED Outdoor Flood Light Fixtures lt= 5000 LED lumens 50 $10 fixture Typically represents replacement of le175 W Metal Halide or equivalent Fixtures must be DLC qualified

ELED4 LED Outdoor Flood Light Fixtures gt 5000 LED lumens 70 $15 fixture Typically represents replacement of Metal Halide or equivalent greater than 175W Fixtures must be DLC qualified

ELED5 LED PoleArm Mounted Parking and Roadway Fixtures and Retrofit Kits lt= 5000 LED lumens 50 $25 fixture Typically represents replacement of le175 W Metal

Halide or equivalent Product must be DLC qualified

ELED6 LED PoleArm Mounted Parking and Roadway Fixtures and Retrofit Kits Outdoor gt 10000 LED lumens 150 $75 fixture

Typically represents replacement of Metal Halide or equivalent greater than 400W Product must be DLC

listed

ELED7 LED PoleArm Mounted Parking and Roadway Fixtures and Retrofit Kits Outdoor 5001 - 10000 LED lumens 70 $50 fixture

Typically represents replacement of Metal Halide or equivalent greater than 175W and less than 400W

Product must be DLC listed

ELED8 LED Wall Mount Fixtures and Retrofit Kits Outdoor lt= 5000 LED lumens 50 $25 fixture Typically represents replacement of le175 W Metal

Halide or equivalent Product must be DLC qualified

ELED9 LED Wall Mount Fixtures and Retrofit Kits Outdoor gt 5000 LED lumens 70 $50 fixture

Typically represents replacement of Metal Halide or equivalent greater than 175W Product must be DLC

qualified Permanent Fixture Removal

PFRA Indoor Permanent Fixture Removal combined with lighting retrofit na $010 watt removed Incentive only valid when units = ldquofixturerdquo in this table

Incentive is only offered when net lumens are reduced PFRB Outdoor Permanent Fixture Removal combined with lighting retrofit na $010 watt removed

Other LED Lighting LEDEXIT LED Exit Sign

na

$2 sign Replacing Incandescent or Fluorescent

SIGN1A Indoor LED Channel Signage $8 letter

Replacing Neon SIGN1B Outdoor LED Channel Signage $8 letter

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 17

Lighting Controls

CTL Unitary Sensor Controls

na

$1500 sensor

Passive infrared ultrasonic detectors are eligible Includes daylighting controls and all occupancy controls

Controls can be onoff stepped or continuous (dimming) Daylight sensor controls are required to be commissioned in order to ensure proper sensor calibration and energy savings

Minimum of 30 watts controlled per control

CLC Interior Central Lighting Controls $00175

square foot of area

under control

Automated central lighting control systems with override capabilities

This measure includes centrally-controlled time clocks wireless on off switches bi level switches computer based

controls pre-set scene selection dimmable ballasts and on-off dimmer switches for non-personal tuning

Floor plan must be submitted verifying square footage

DAYOCC Controls Combination - Daylighting and Occupancy Fixture Mounted $1500 sensor Minimum of 30 watts controlled per control

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 18

LED Traffic SignalsThis measure applies to the early replacement of existing incandescent traffic lights and pedestrian signals with LEDs New LED traffic signals must comply with ENERGY STAR requirements which can be found at httpswwwenergystargoviapartnersproduct_specseligibilitytraffic_eligpdf98bfshy1786

LED Traffic Signals Incentive Table

Round Traffic Signals 8 Red

Incentive per Signal

$15

8 Yellow 8 Green 12 Red

12 Yellow 12 Green

Turn Arrow Signals

8 Red

$13

8 Yellow 8 Green 12 Red

12 Yellow 12 Green

Pedestrian Signals

9 Pedestrian Only

$13

12 Hand Only 12 Pedestrian Only 12 Countdown Only

12 Pedestrian and Hand Overlay 16 Pedestrian and Hand Side by

Side 16 Pedestrian and Hand Overlay

16 Hand and Countdown Side-by-Side

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 19

Lighting Controls that Exceed Code Requirements

New Construction Lighting SpecificationsUnder the Lighting Power Density Approach the lighting power installed is compared with the lighting power allowed by code Incentives are available for systems where the installed lighting power is lower than the code-allowed power by at least 10 Savings are based on the Lighting Power Density (LPD) calculated on a watts per square foot basis Incentives will be paid only on the area of the building where the lighting installation is complete and is ready for occupancy If a portion of a building is not built-out such that the lighting in an area is not complete and ready for occupancy then that portion is not eligible for an incentive Baseline lighting power density is based on ASHRAE 901- 2007 Either the Space-by-Space or Building Area method may be used to calculate the LPD for the purposes of the incentive

Required Documentation bull Lighting Worksheet bull COMcheck Interior Lighting Report or equivalent analysis demonstrating space-byshy

space or building area calculations bull Reflected ceiling plans and electrical plan sheets showing lighting fixture layout bull Lighting fixture schedule sheet including fixture counts bull Fixture submittal or specification sheets showing model number and rated fixture wattage bull Architectural floor plans displaying floor area affected by proposed lighting installation

New Construction Lighting Incentives Table Lighting Wattssq ft

Improvement over of Code Incentive

gt= 10 and lt 20 $0035sq gt= 20 and lt 30 $007sq ft gt= 30 and lt 40 $0105sq

gt= 40 $021 sq ft

Incentives will be paid on a ($005kWh) custom basis Please contact Program Staff for eligibility of lighting controls for New Construction projects

Interior Occupancy Sensors Incentives are offered for occupancy-based controls in areas where they are not required by code Passive infrared ultrasonic detectors and fixture-integrated sensors or sensors with a combination sensor are eligible All sensors must be hard-wired and control interior lighting fixtures The incentive is per Watt controlled An inventory of the controlled fixtures and their wattage must be provided for each sensor with the Final Application

Daylight Dimming System Incentives are offered for daylight sensor controls in spaces with suitable available ambient light for at least part of the day Light may be through skylights clerestories windows or ldquolight tubesrdquo The controls can be onoff stepped or continuous dimming The onoff controller should turn off artificial lighting when the interior illuminance meets the desired indoor lighting level The stepped controller generally dims the artificial lighting 50 when the interior illuminance levels reach 50 of the desired lighting levels Continuous or dimming controllers dim artificial lighting proportionally to the available ambient light All types of daylight sensor controls are required to be commissioned in order to ensure proper sensor calibration and energy savings

Required Documentation bull Cut sheets or submittals of lighting control systems Reflected ceiling plans or schedule

showing which fixtures are controlled by lighting controls

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 20

New Construction Lighting Power Density CodeRequirements ndash Space by Space Method

Building Specific Space Types LPD (Wft2) Building Specific Space Types LPD (Wft2)

GymnasiumExercise Center AutomotivemdashServiceRepair 07

Playing Area 14 Manufacturing

Exercise Area 09 Low (lt25 ft Floor to Ceiling Height) 12

CourthousePolice StationPenitentiary High (gt25 ft Floor to Ceiling Height) 17

Courtroom 19 Detailed Manufacturing 21

Confinement Cells 09 Equipment Room 12

Judges Chambers 13 Control Room 05

Fire Stations HotelMotel Guest Rooms 11 Fire Station Engine Room 08 DormitorymdashLiving Quarters 11

Sleeping Quarters 03 Museum

Post Office-Sorting Area 12 General Exhibition 10 Convention Center-Exhibit Space 13 Restoration 17

Library BankOfficemdashBanking Activity Area 15 Card File and Cataloging 11 Religious Buildings

Stacks 17 Worship Pulpit Choir 24

Reading Area 12 Fellowship Hall 09

Hospital Retail

Emergency 27 Sales Area [For accent lighting see 93121(c)] 17

Recovery 08 Mall Concourse 17

Nurse Station 10 Sports Arena

ExamTreatment 15 Ring Sports Area 27

Pharmacy 12 Court Sports Area 23

Patient Room 07 Indoor Playing Field Area 14

Operating Room 22 Warehouse

Nursery 06 Fine Material Storage 14

Medical Supply 14 MediumBulky Material Storage 09

Physical Therapy 09 Parking GaragemdashGarage Area 02

Radiology 04 Transportation

LaundrymdashWashing 06 AirportmdashConcourse 06

AirTrainBusmdashBaggage Area 10

TerminalmdashTicket Counter 15

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 21

New Construction Lighting Power Density CodeRequirements ndash Building Area Method

Building Area Type 221 LPD (Wft2)

Automotive facility 09

Convention center 12

Courthouse 12

Dining bar loungeleisure 13

Dining cafeteriafast food 14

Dining family 16

Dormitory 1

Exercise center 1

Gymnasium 11

Health-care clinic 1

Hospital 12

Hotel 1

Library 13

Manufacturing facility 13

Motel 1

Motion picture theater 12

Building Area Type LPD (Wft2)

Multifamily 07

Museum 11

Office 1

Parking garage 03

Penitentiary 1

Performing arts theater 16

Policefire station 1

Post office 11

Religious building 13

Retail 15

Schooluniversity 12

Sports arena 11

Town hall 11

Transportation 1

Warehouse 08

Workshop 14

221 In cases where both a common space type and a building specific type are listed the building specific space type shall apply

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 22

Exterior New Construction LightingExterior New Construction savings over code lighting power density will be incentivized using custom lighting measure at $005kWh rate Participants must submit exterior lighting plans Submittals COMCHECK REPORT and lighting schedule for exterior lighting Savings are calculated from the LPD (Wsq ft) indicated below Additional information may be required based on the building exterior type and space description indicated below To contribute to incentive LEDs must satisfy program requirements for DLC Energy Star or equivalent listing

Required Documentation bull COMcheck Interior Lighting Report or equivalent analysis demonstrating space-by-space or

building area calculations bull Drawings showing lighting fixture layout bull Lighting fixture schedule sheet including fixture counts bull Fixture submittal or specification sheets showing model number and rated fixture wattage

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 23

Building Exterior Space Description LPD

Unco erect Pariki Ilg Area Parlurng ots arnd Drives 0 15 WfW

B i ing Grournds W al 1Yays lless Hlan 11] e 10 Wltirneru- 00

W a Nays 10 middot de or greater 112 W

Plaza a reas

Spec rest re areas

Stainh1ays 1ow 2

B i ing 8ntrames and Exits Ma efilbies m wr near foot of door width

Other doors 2o w 1r ear foot of door width

Ctmqpies and Overhimgs Free starndillg and a ched tmd 12s w m2 m bullerhangs

0 door sales Op en areas (ind udi Ilg ve id e sales 05 W lo )

street frontage far vehicle sales lots 21] W linear toot in addi middot on to open are-0bullmiddot lo~nce

B i ing facades 0 2 W tfl2 middot or eacil illumirnated N311 or surface

o r 5 0 Wllinear root fo r eac h m n inated N3l1 o r

surface length

Automated te lle r rnachmiddot es a lld 210 W per loca tion plus 91] night deposito liies W 1pernddiliorml A I middot per

1oca middot om

Eirltrances and gatehouse inspecliion 125 W ffl2 o middot uncovered slatiaBS a goo~ ed acir ies area

Load ing are-0s or law enforcement 0 5 W 2 of u rnco1bullered area fire ambu rnce and otiher emergency service ibullehmiddotctes

Drive-through w indOWs a taslrood 400 W per drive-Hlrough restaurants

Parking near 24 -h our retail 80111 W per main entry entmn ces

HVAC Equipment Air-Source Air Conditioners and Air-Source Heat Pumps New unitary air conditioning units or air source heat pumps that meet or exceed the qualifying cooling efficiency shown in the HVAC Incentives Worksheet are eligible for an incentive They can be either split systems or single package units The efficiency of split systems is based on an ARI reference number All packaged and split system cooling equipment must meet Air Conditioning and Refrigeration Institute (ARI) standards (210240 320 or 340360) be UL listed use a minimum ozone-depleting refrigerant (eg HCFC or HFC) All required efficiencies are based on the Consortium for Energy Efficiency (CEE) high-efficiency commercial air conditioning and heat pump specifications (wwwcee1org) A manufacturerrsquos specification sheet indicating the system efficiency must accompany the application Disposal of the existing unit

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 24

must comply with local codes and ordinances

Package Terminal Systems (Replacements) Package terminal air conditioners and packaged terminal heat pumps are through-the-wall self-contained units that are 2 tons (24000 Btuh) or less All EER values must be rated at 95degF outdoor dry-bulb temperature

Ductless Mini-Split Heat Pump lt54 Tons Incentives are offered for Ductless Mini-Split Heat Pump lt54 Tons with SEER rating greater than or equal to 120 and EER greater than or equal to 145 and HSPF greater than or equal to 90

Geothermal Heat Pump Geothermal equipment is a high-efficiency groundwater source water source or ground source heat pump system that meets or exceeds the energy efficiency requirements shown in the tables below These measures do not apply to heat pump systems coupled with non-heat pump systems such as chillers rooftop AC units boilers or cooling towers which must be filed as custom measures All HVAC applications other than comfort cooling and heating such as process cooling must also be applied for as custom measures

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 25

HVAC Heating Qualifying Incentive

Equipment Type and Cooling Capacity Cooling Qualifying Efficiency ($ per cooling Measure Code Efficiency

ton)

Air Cooled Air Conditioner

H01 lt 54 tons (lt 65000 Btuhr) 15 SEER NA $22

H02 lt 54 and lt 11 25 tons

125 IEER $22 (lt 65 000 Btuh and lt 135 000 Btuhr) NA

H03 lt11 25 and lt 20 tons

123 IEER NA $22 (lt 135000 Btuh and lt 240000 Btuhr)

H04 lt 20 and lt 6333 tons (~

11 1 IEER NA $22 240000 Btuh and lt 760000 Btuhr)

HOS ~ 6333 Ions (~ 760000 Btuhr) 103 IEER NA $22

Air Cooled Heat Pumps

H06 lt 54 tons (lt 65000 Btuhr) 143 SEER 87 HSPF $30

H07 lt 54 and lt 11 25 tons

123 IEER 3 3 COP $30 (lt 65000 Btuh and lt 135000 Btuhr)

HOS lt11 25 and lt 20 tons

1U IEER 3 2 COP $30 (lt 135000 Btuh and lt 240000 Btuhr)

H09 lt 2000 tons (240000 Btuhr) 105 IEER 3 2 COP $30

Packaged Terminal Systems (PTAC and PTHP) (PTHP only)

H10 lt 8000 Btuhr (lt066 tons) 11 8 EER 33 $17

H11 ~8000 and lt10500 Btuhr (~066 and lt 0875 tons) 11 4 EER 32 $17

H12 gt10500 Btuhr ( 875 tons) 107 EER 31 $17

H22 lt 54 tons (lt 65000 Btuhr) 121 EER 12 3 IEER NA $22

lt 54 and lt 11 25 tons 121 EER 12 3 IEER $22 H23

(lt 65000 Btuh and lt 135000 Btuhr) NA

H24 lt11 25 and lt 20 tons

120 EER 12 2 IEER $22 (lt 135000 Btuh and lt 240000 Btuhr) NA

H25 lt20 and lt 633 tons

119 EER 12 2 IEER $22 (lt 240000 Btuh and lt 760000 Btuhr) NA

H26 ~ 633 tons( lt760000 Btuhr) 110 EER 11 1 IEER NA

$22

HVAC Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 26

Other HVAC EquipmentHotel Guest Room Occupancy Sensor Incentives are offered for occupancy-based controls that control electric air conditioning air source heat pumps and or electric heating units for individual hotel rooms Systems with nonshyelectric heat are not eligible Sensors must be controlled by automatic occupancy detectors or a key-card system and the default setting for controlled units differ by at least 5 degrees (or shut the unit fan and heating or cooling off completely) from the operating set point during unshyoccupied periods The control system may also be tied into other electric loads such as lighting and plug loads to shut them off when occupancy is not sensed The incentive is per room Replacement or upgrades of existing occupancy-based controls are not eligible as a prescriptive incentive

Economizer Integrated Dual Enthalpy Economizer ControlsThis measure is targeted to non-residential establishments whose HVAC equipment is not equipped with a functional economizer

Circulation Fan High-Volume Low-SpeedFans must be greater than 16 feet in diameter and have variable speed control

ECM Circulation Fan This measure is targeted to non-residential customers whose air handling equipment currently uses a SP or PSC fan motor rather than an ECM This measure applies only to circulating fan motors of 1 HP or less Above 1 HP motors are governed by NEMA standards and would see little to no efficiency benefit by adding an ECM The targeted fan can supply heating or cooling only or both heating and cooling

ECM Circulation Pump This measure is targeted for replacement of a shaded pole or permanent split capacitor pump or motor with an electronically commutated pump or motor le75 HP

Retrocomissioning Cooling Systems Confined to chiller plant andor isolated packaged units For reservation must contain proposal with defined scope at equipment level that demonstrates energy savings For final approval required final commissioning report including raw data (TAB reports) demonstrating actual scope

This prescriptive measure can be used for facilities with maximum cooling demand less than 1687 tons Larger systems require the use of custom HVAC measure

Retrocomissioning Whole Building Covers all relevant major mechanical systems such as chiller plant air side systems compressed air andor process systems For reservation must contain proposal with defined scope at equipment level that demonstrates energy savings For final approval required final commissioning report including raw data (TAB reports) demonstrating actual scope

This prescriptive measure can be used for facilities less than 404858 square feet Larger facilities require the use of custom HVAC measure

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 27

Energy Management System For installing a web-based building automation system in existing buildings that currently have no digital automated HVAC controls or have outdated pneumatic control systems with inoperable time control functions Existing HVAC control systems must not have time-of-day scheduling Upgrading obsolete EMS HVAC system with inoperable time clock functions will be reviewed on a case-by-case basis for incentive eligibility This incentive cannot be combined with incentives for programmable thermostats or setback-setup controls Must include the controls strategy and a scaled floor-plan with controlled areas highlighted HVAC BAS systems must be new and include bull Central time clock control bull Web-based interface with PC-based controls and graphic bull Building performance Tracking bull Open-protocol architecture controls system shall consist of either LonTalk (ANSICEA 7091) or BACNet (ASHRAE ANSI 135) protocol being used between all controlled and controlling devices and every node on the network bull Minimum setback period must exceed 2200 hours per year bull A minimum setback space temperature of at least 10degF when heating and 5degF when cooling bull Ability to adjust schedules and settings remotely over the internet bull Report generation describing energy and operating trends

This prescriptive measure can be used for facilities with maximum cooling demand less than 456 tons Larger systems require the use of custom HVAC measure

Demand Controlled Ventilation New ventilation controls must use carbon dioxide levels to measure occupancy and modify the percentage of outside air based on occupancy levels Only buildings with space heating and cooling requirements are eligible Conditioned spaces must be kept between 65ordmF and 75ordmF during occupied operating hours Carbon dioxide sensors must be installed in conjunction with fully functioning motor operated outside air dampers Dual temperature air-side economizers with zone-level CO2 sensors for rooftop units are eligible

This prescriptive measure can be used for facilities with maximum cooling demand less than 2210 tons Larger systems require the use of custom HVAC measure

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 28

Other HVAC Measures- consult project manual for eligibility specifications HVAC

Measure Incentive Unit Quantity Incentive

Measure Code er Unit

H1 8 Hotel Guest Room Occupancy Sensor Room $20

H1 9 Economizer Integrated Dual Enthalpy Economizer Controls Ton $1 5

H20 Circulation Fan High-Volume Low-Speed Unit $30

H21 ECM Circulation Fan Fan $1 5

H27 ECM Circulation Pump Pump $50

H28 Retrocommissioning Cooling Systems

Ton $750

H29 Retrocommissioning Whole Buidling

Square Foot $010

H29 Energy Management System Ton $2500

H30 Demand Controlled Ventilation Ton $2500

Other HVAC Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 29

Unitary HVAC Chillers

Air-Cooled Chillers Water Cooled Positive Displacement Reciprocating Chillers and Water Cooled Centrifugal Chillers Chiller applications including existing multiple chiller configurations (including redundant or lsquostand-byrsquo chillers) existing chillers serving multiple load groups and chillers in industrial applications are defined as non-standard applications and must follow a site-specific custom protocol $005kWh) rate

Incentives are offered for chillers with an IPLV value (expressed in kW per ton) that is less than or equal to the qualifying efficiency shown in the table below The chiller efficiency rating must be based on ARI Standard 550590-2003 for IPLV conditions The chillers must meet ARI standards 550590-2003 be UL listed and use a minimum ozone-depleting refrigerant (eg HCFC or HFC) The ARI net capacity value should be used to determine the chiller tons A manufacturerrsquos specification sheet with the rated kWton-IPLV or COP-IPLV must accompany the application along with the four point performance data that is the basis for the IPLV The application must include a certification that the chiller is appropriately sized for site design load conditions

Chillers must satisfy efficiency requirements for both full load and IPLV efficiencies for either Path A or Path B The table shows the minimum efficiency ratings to qualify for the prescriptive incentive which must be consistent with the expected operating conditions of the efficient chiller For example if the efficient chiller satisfies Path A and generally performs at part load the appropriate baseline chiller efficiency is the IPLV value under Path A If the efficient chiller satisfies Path B and generally performs at full load the appropriate baseline chiller efficiency is the full load value under Path B Generally chillers operating above 70 percent load for a majority (50 or more) of operating hours should use Path A and chillers below 70 load for the majority of operating hours should use Path B

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 30

C3 lt 75 tons

C4 75 tons and lt 150 tons

cs ~ 150 tons and lt 300 tons C6 ~ 300 tons

Water Cooled Centrifugal Chillers C7 lt 300 tons CB ~ 300 tons and lt 600 tons

C9 ~ 600 tons

Path A

Qualifying Full Load Efficiency

Qualifying IPLV Efficiency

Path B

Qualifying Full Load Efficiency

Qualifying IPLV Efficiency

0780 kWton 0567 kWton 0800 kWton 0540 kWton

0775 kWton 0554 kWton 0790 kWton 0527 kWton

0680 kWton 0522 kWton 0718 kWton 0486 kWton 0620 kWton 0486 kWton 0639 kWton 0441 kWton

0634 kWton 0536 kWton 0639 kWton 0405 kWton 0576 kWton 0494 kWton 0600 kWton 0360 kWton

0570 kWton 0494 kWton 0590 kWton 0360 kWton

I

Incentive ($ton)

$17

$17

Unitary Chiller Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 31

Refrigeration

Anti-Sweat Heater Controls Incentives are offered for devices that sense the relative humidity in the air outside of the display case and cycles or turns off the glass door (if applicable) and frame anti-sweat heaters when the ambient dew point is below a preset set point Technologies that can turn off anti-sweat heaters based on sensing condensation (on the inner glass pane) also qualify Incentive is based on the number of doors

Evaporator Fan Controls This measure is for the installation of controls in medium temperature walk-in coolers The controller reduces airflow of the evaporator fans when there is no refrigerant flow The measure must control a minimum of 120 HP where fans operate continuously at full speed The measure also must reduce fan motor power by at least 75 during the off cycle This measure is not applicable if any of the following conditions apply 1) Compressor runs all the time with high duty cycle 2) Evaporator fan does not run at full speed all the time 3) Evaporator fan motor runs on poly-phase power 4) Evaporator fan motor is not shaded-pole or permanent split capacitor (PSC) 5) Evaporator fan does not use off-cycle or time-off defrost

Floating Head Pressure Controls Controls must vary head pressure to adjust condensing temperatures in relation to outdoor air temperature Must replace existing constant pressure or manually controlled systems to achieve reduced head pressure in order to maintain a minimum saturated condensing temperature of 70 degF or a 20 degF variance below design heat pressure during mild weather conditions Compressor size must be at least 5 HP

Automatic Door Closers for Walk-In Coolers and Freezers The auto-closer should be applied to the main insulated opaque door(s) of a walk-in cooler or freezer The auto-closer must be able to firmly close that door when it is within one inch of full closure This must be a newly installed automatic door closer replacements on previously installed door closers are not eligible for an incentive

EC Motor for Walk-inReach-in Refrigerated cases or Freezer cases Incentives are offered for replacement of an existing standard-efficiency shaded-pole or permanent split capacitor evaporator fan motor in refrigerated display cases or fan coil in walk-ins The replacement unit must be an Electronically Commutated Motor (ECM) This measure cannot be used in conjunction with the Evaporator Fan Controller measure

ENERGY STAR Solid Door Freezer and Glass Door Freezer and Refrigerators Incentives are offered for replacement of existing self-contained refrigerators and freezers with units that are ENERGY STARreg listed Only units with built-in refrigeration systems are qualified Units with remote refrigeration systems or units do not qualify Customers must provide proof that the appliance meets the CEE or ENERGY STAR efficiency specifications using ASHRAE Standard 72-2005 (38degF plusmn 2degF) Incentive is per unit

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 32

Refrigeration Suction Pipe Insulation 1 Must insulate bare refrigeration suction lines of 1 58 inches in diameter or less on existing equipment only 2 Cooler lines require frac34 inch of flexible closed-cell nitrite rubber or an equivalent insulation 3 Freezer lines require 1-inch of flexible closed-cell nitrite rubber or an equivalent insulation 4 Insulation exposed to the outdoors must be protected from the weather (ie jacketed with a medium-gauge aluminum jacket)

Night Cover 1 Must install a cover on an existing open refrigerated display case to decrease its cooling load during off hours 2 The equipment manufacturer must not object to the use of night covers for the existing display case model 3 This rebate is based on the linear footage of the installed 4 The cover must be applied for a period of at least six hours

Strip Curtain on Walk-In CoolerFreezer 1 New strip curtains or plastic swinging doors must be installed on doorways of refrigerated spaces (conditioned to less than 50deg F) 2 Rebate is based on the linear footage of the doorway that the strip curtains are being installed in 3 Opening between the strip curtain and bottom of doorway must be no larger than 1 inch 4 Strips must have an overlay greater than 1 inch

Evaporator Coil Defrost Control 1The current system must include an operating electric defrost system with a functional electroshymechanical time clock 2 Evaporator coil temperature and pressure must be monitored by controller in order to determine optimal defrost cycles 3 New intelligent control systems to control the defrost systems will typically replace timed- defrost controls

Variable Speed Refrigeration Compressor This measure VSD control for refrigeration systems and its eligibility targets applies to retrofit construction in the commercial and industrial building sectors it is most applicable to grocery stores or food processing applications with refrigeration systems This protocol is for a VSD control system replacing a slide valve control system

Add Doors to Open Refrigerated Cases The eligible retrofit equipment is either no sweat doors or doors with anti-sweat heaters If a lighting retrofit is included with the new doors it must consume the same amount of energy or less energy than the old lighting Upgrades to lighting or other system components should be processed separately Horizontal cases are not eligible and should be processed as custom

Door Gaskets PECO Smart Ideas For Your Business CampI Program Application Manual

Q1 2017 pg 33

This measure is applicable to commercial refrigeration and applies to the replacement of worn-out gaskets with new better-fitting gaskets Applicable gaskets include those located on the doors of walk-in andor reach-in coolers and freezers This protocol applies to the main doors of both low temperature (ldquofreezerrdquo ndash below 32 degF) and medium temperature (ldquocoolerrdquo ndash above 32 degF) walk-ins

Zero Energy Doors For this measure a no-heatlow-heat clear glass door must be installed on an upright display case It is limited to door heights of 57 inches or more Doors must have either heat reflective treated glass be gas filled or both This measure applies to low temperature cases onlymdashthose with a case temperature below 0degF Doors must have 3 or more panes Total door rail glass and frame heater amperage ( 120 volt) cannot exceed 039413 amps per door for low temperature display cases Rebate is based on the door width (not including case frame)

Air Cooled Refrigeration Condenser Approach temperature lt8F for low temperature loads lt13F for medium temperature loads

Oversized Condenser with VFD New standalone condenser must no more than 150 larger than load

Case Light Occupancy Controls Acceptable for freezer or refrigerated cases as well as open cases or cases with doors

LED Open Case Lighting For replacing open case T8 or T12 fluorescent fixtures with DLC listed LEDs on refrigerators coolers and freezers

LED Enclosed Case Lighting Refrigerated LED case lighting with or without motion sensors on enclosed refrigerated vertical displays The baseline equipment is assumed to be cases with uncontrolled T8 or T12 linear fluorescent lamps

LED Enclosed Case Lighting Freezer LED case lighting with or without motion sensors on enclosed freezer vertical displays The baseline equipment is assumed to be cases with uncontrolled T8 or T12 linear fluorescent lamps

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 34

Refrigeration Measures Ref Measure

Measure Incentive Unit IncentiveUnit Code R01 Anti-Sweat Heater Controls Door $30

R02 Evaporator Fan Controls Controller $50

R03 Floating-head Pressure Controls HP $20

R04 Automatic Door Closers fo r Walk-in Coolers Door $75

R05 Automatic Door Closers fo r Walk-in Freezers Door $75

R06 Evaporator Fan EC Motor fo r Reach- in Cases Motor $35

RO Evaporator Fan EC Motor fo r Walk-in Cases Motor $50

R08 ENERGY STARreg Glass Door Freezer lt15 Cu Ft Unit $100

R09 ENERGY STARreg Glass Door Freezer 15- 49 Cu Ft Unit $125

R10 ENERGY STARreg Glass Door Freezer ~ 50 Cu Ft Unit $145

R11 ENERGY STARreg Solid Door Freezer Unit $75

R12 ENERGY STARreg Glass Door Refrigerator lt50 Cu Ft Unit $30

R13 ENERGY STARreg Glass Door Refrigerator gt= 50 Cu Ft Unit $50

K14 t NtKGY ~ I AKreg ~Olld Uoor Ketngerator $ OU Cu t-t Unit $~0

R15 Suction Pipe Insulation Walk-in Coolers Linear Foot $050

R16 Suction Pipe Insulation Walk in Freezers Linear Foot $075

R17 Night Cover Linear Foot $800

R18 Strip Curtains on Walk-in Cooler Linear Foot $250

R19 Evaporator Coil Defrost Control Controller $7500

R20 Variable Speed Refrigeration Compressor Compressor $85

R21 Add Doors to Open Refrigerated Cases Door $55

R22 Door Gaskets Door $250

R23 Zero Energy Doors Door $50

R24 A ir Cooled Refrigeration Condenser Ton $10

R25 Oversized Condenser with VFD Ton $10

R26 Case Light Occupancy Controls Door $8

R27 LED Open Cose Lighting Cose $10

R28 LED Enclosed Case Lighting Refrigerated Door $30

R30 LED Enclosed Case Lighting Freezer Door $30

Refrigeration Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 35

Food Service Beverage and Snack Machine Controls Incentives are offered for refrigerated vending machines that contain non-perishable bottled and canned beverages Controller for both types of systems must include a passive infrared occupancy sensor to turn off fluorescent lights and other energized machine systems when the surrounding area is unoccupied for 15 minutes or longer For the refrigerated machines the control logic may include periodic power up at 2-hour intervals or longer to maintain product temperature and provide compressor protection

ENERGY STARreg Refrigerated Beverage Vending Machines Incentives are offered for ENERGY STARreg beverage vending machines Qualifying machines can be found at httpswwwenergystargovproductsothervending_machines

ENERGY STARreg Electric Steam Cooker This measure applies to the installation of electric ENERGY STAR steam cookers as either a new item or replacement for an existing unit Gas steam cookers are not eligible The steam cookers must meet minimum ENERGY STAR efficiency requirements A qualifying steam cooker must meet a minimum cooking efficiency of 50 percent and meet idle energy rates specified by pan capacity

ENERGY STARreg Electric Combination Oven This measure applies to electric ovens capable of handling single 12 x 20 x 25 pan per rack

ENERGY STARreg Commercial Convection Oven The oven must meet or exceed heavy load potato cooking energy efficiency of greater than 70 utilizing ASTM Standard F149 Applies only to electric ovens

ENERGY STARreg Commercial Fryers The commercial fryer must have a tested heavy load (French fry for large vats) cooking energy efficiency of greater than 80 utilizing American Society for Testing and Materials (ASTM) Standard F1361 for commercial fryers and ASTM Standard F2144 for large vat fryers Multiple vat configurations are paid per qualifying vat ENERGY STAR maintains a list of qualifying products and specifications at httpwwwenergystargov

ENERGY STARreg Commercial Hot Holding Cabinet Energy STAR rating electric

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 36

Food Service amp Other Measures FoodOther

Measure Incentive Unit Incentive

Measure Code Unit

F01 Beverage Machine Controls Unit $25

F02 Snack Machine Controls Unit $20

F03 ENERGY STARreg Refrigerated Beverage Vending Machir Unit $125

F04 ENERGY STARreg Commerc ial Steam Cooker Unit $200

F05 ENERGY STARreg Electric Combination Oven Unit $200

F06 ENERGY STARreg Commercial Electric Convection Oven Unit $150

F07 ENERGY STARreg Commerc ial Fryers Unit $100

F08 ENERGY STARregCommerc ial Hot Holding Cabinet Unit $200

Food Service Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 37

Motors and Variable Frequency DrivesEarly Replacement Motors For constant speed and uniformly loaded motors this measure applies to the replacement of old motors with new energy efficient motors of the same rated horsepower Old motors must be less than 15 years Replacements where the old motor and new motor have different horsepower ratings are considered custom measures Motors with variable speeds variable loading or industrial-specific applications are also considered custom measures

Motors Incentive Table Motors

Measure Code

HP Incentive per Motor

M01 15 - 10 $40 M02 11 - 50 $100 M03 51-100 $150 M04 gt100 $300

Only VFDs on unitary systems are eligible Non-unitary systems must be submitted as a custom measure Soft start motors are not eligible

Variable Frequency Drives on HVAC Fan Applications Incentives are offered for installing VFDs on existing HVAC fans that do not have pre-existing VFDs This measure applies to HVAC supply and return fans only All other fans including cooling tower fans must be submitted as custom measures Manually fixed speed settings on HVAC fans must be submitted via custom application The VFD must control motor speed automatically in response to pressure flow temperature or other variable signal The installation of a VSD must accompany the permanent removal or disabling of any throttling devices such as inlet vanes bypass dampers and throttling valves etc The incentive is offered per controlled HP

Variable Frequency Drives on Pump Applications Incentives are offered for installing VFDs on existing chilled water pumps and heating hot water pumps that do not have existing VFDs This measure applies to chilled water pumps and heating hot water pumps only All other pumps must be submitted as custom measures Manually fixed speed settings on pumps must be submitted via custom application The VFD must control motor speed automatically in response to pressure flow temperature or other variable signal The installation of a VSD must accompany the permanent removal or disabling of any throttling devices such as throttling valves The incentive is offered per controlled HP

Variable Speed Control for Kitchen Exhaust Hoods The measure consists of installing a new VSD in conjunction with a sensor control system that varies the exhaust rate of kitchen ventilation (exhaust andor makeup air fans) based on the heat and effluent output from the cooking appliances (ie the more heat and smokevapors generated the more ventilation needed) This involves installing a temperature sensor in the hood exhaust collar andor an optic sensor on the end of the hood that senses cooking conditions and allows the system to automatically vary the rate of exhaust to match requirements by adjusting the fan speed accordingly

Variable Speed Drives for Process or Other Equipment VFD must be used in conjunction with a process (non HVAC) application To qualify for this incentive the driven equipment must operate at least 2000 hours per year Redundant or back- up units do not qualify VFDs replacing existing VFDs do not qualify The VFD must control motor

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 38

speed automatically in response to pressure flow temperature or other variable signal VFDs installed as ldquosoft startrdquo without automatic manual closed loop speed control do not qualify The installation of a VFD must accompany the permanent removal or disabling of any throttling devices such as throttling valves The incentive is per controlled HP and only applies to controlled motors less than 50 HP

VSDVFD Incentives Table VFD

Measure Code

Measure Unit Incentive per Unit

Fan Application

V01 VFD on HVAC Fan HP $25 Pump Application

Variable Speed Control for Kitchen Exhaust Hoods

Variable Speed Drives for Process or Other Equipment

V02 VFD on Chilled Water Pumps HP $25 V03 VFD on Heating Hot Water Pumps HP $25

V04 Kitchen Exhaust Fan Retrofit Hood HP $500

V05 Process Motor lt 50 HP HP $50

Domestic Hot Water Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater This measure documents the energy savings attributed to converting from a standard electric water heater to an ENERGY STAR natural gaspropane-fired water heater or a standard oil-fired water heater with an Energy Factor of 0585

Heat Pump Water Heater This includes heat pump water heaters with energy factors meeting ENERGY STAR criteria The measure described here involves a direct retrofit of a resistive electric water heater with a heat pump water heater It does not cover systems where the heat pump is a pre-heater or is combined with other water heating sources More complicated installations can be treated as custom projects

Low Flow Pre-Rinse Spray Valve This measure applies to efficient low flow pre-rinse sprayers in grocery and food service applications The most likely areas of application are kitchens in restaurants and hotels Only premises with electric water heating may qualify for this incentive In addition the replacement pre-rinse spray nozzle must use less than 16 gallons per minute with a cleanability performance of 26 seconds per plate or less Low flow pre-rinse sprayers reduce hot water usage and save energy associated with water heating

Domestic Hot Water Incentive Table

Measure Code Measure Unit Retrofit Incentive per

Unit

W01 Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater Unit $100

W02 Heat Pump Water Heater Unit $100 W03 Low-Flow Pre-Rinse Spray Valve Valve $17

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 39

Compressed Air SystemsNo-loss Condensate Drain No-loss Condensate Drains are controlled by a sensor that monitors the level of condensate and only open when there is a need to drain condensate They close before compressed air is allowed to escape This measure is targeted to non-residential customers whose equipment is a timed drain that operates on a pre-set schedule Acceptable baseline conditions are compressed air systems with standard condensate drains operated by a solenoid and timer

Air-Entraining air nozzle This measure is targeted to non-residential customers whose compressed air equipment uses stationary air nozzles in a production application with an open copper tube of 18rdquo or 14rdquo orifice diameter Energy efficient conditions require replacement of an inefficient non-air entraining air nozzle with an energy efficient air-entraining air nozzle that use less than 15 CFM at 100 psi for industrial applications

Storage Tanks for LoadNo Load Screw Compressors This measure protocol applies to the installation of air receivers with pressureflow controls to loadno load compressors Loadno load compressors unload when there is low demand The process of unloading is done over a period of time to avoid foaming of the lubrication oil Using a storage tank with pressureflow control will buffer the air demands on the compressor Reducing the number of cycles in turn reduces the number of transition times from load to no load and saves energy The baseline equipment is a loadno load compressor with a 1 galcfm storage ratio or a modulating compressor with blowdown The high efficiency equipment is a loadno load compressor with a minimum storage ratio of 4 gallons of storage per cfm

Cycling Refrigerated Thermal Mass Dryer When air is compressed water vapor in the air condenses and collects in liquid form Some of this condensate collects in the air distribution system and can contaminate downstream components such as air tools with rust oil and pipe debris Refrigerated air dryers remove the water vapor by cooling the air to its dew point and separating the condensate Changes in production and seasonal variations in ambient air temperature lead to partial loading conditions on the dryer Standard air dryers use a hot gas bypass system that is inefficient at partial loads A Cycling Thermal Mass Dryer uses a thermal storage medium to store cooling capacity when the system is operated at partial loads allowing the dryer refrigerant compressor to cycle

This measure is targeted to non-residential customers whose equipment is a non-cycling refrigerated air dryer with a capacity of 600 cfm or below Acceptable baseline conditions are a non-cycling (eg continuous) air dryer with a capacity of 600 cfm or below The replacement of desiccant deliquescent heat-of-compression membrane or other types of dryers does not qualify under this measure

Variable Speed Air Compressor This type of compressor uses a special drive to control the speed (RPM) of the unit which in turn saves energy compared to a fixed speed equivalent

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 40

No-loss Condensate Drain Air-Entraining Air Nozzle Cycling Refrigerated Thermal Mass Dryer

Compressor Incentive per

Equipment Type Units Quantity Daily Operating Unit

Hours

CA04 Storage Tanks for LoadNo Load Screw

Compressor HP $10 Compressors

CA05 Variable Speed Air Compressor

Compressor HP $30

CA06 Compressed Air System Optimization

Compressor HP $50

Compressed Air System Optimization The submitted optimization measures must be identified in an Air System Audit or equivalent study to be eligible The measures must demonstrate energy savings as evaluated by a Program Engineer Additionally measures must also fall under one or more of the category below to be eligible

1) Install storage Receivers (new receivers only replacing existing storage receivers are ineligible)

2) Compressor control (must demonstrate improvement in partial load efficiency of the compress air system including reduceeliminate partially loaded units)

3) Dryer control 4) Source pressure reduction 5) Right-sizing distribution components such as piping filters regulators

connectors and hoses (routine maintenance replacements are ineligible) 6) Leakage detection and repair 7) Eliminate low-efficiency end-usages of compressed air 8) Heat recovery (most reduce electricity consumption of the replaced heat source)

Compressed Air Systems Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 41

lt65000 Btuh

~ 65000 Btuh and lt135000 Btuh

135000 Btuhand lt240000 Btuh

240000 Btuh and lt760000 Btuh

760000 Btuh

154

142

135

125

123

Chiller Capacity Path APath B efficiency (kWton )

lt 150 tons

~150 tons and lt300 tons

300 tons and lt400 tons

400 tons and lt600 tons

600 tons

lt75 tons

~75 tons and lt150 tons

~150 tons and lt300 tons

~300 tons and lt600 tons

600 tons

0610 FU0695 FL and 0550 IPLV0440 IPLV

0610 FU0635 FL and 0550 IPLV0400 IPLV

0560 FU0595 FL and 0520 IPLV0390 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

Path APath B efficiency (kWton )

0750 FU0780 FL and 0600 IPLV0500 IPLV

0720 FU0750 FL and 0560 IPLV0490 IPLV

0660 FU0680 FL and 0540 IPLV0440 IPLV

0610 FU0625 FL and 0520 IPLV0410 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

Data Centers Data Center incentives are available for facilities ranging in size from office server closets to large standalone facilities

Air Cooled Chiller Path APath B EER (BtuWh) lt150 tons 101 FL97 FL and 137 IPLV158 IPLV ge150 tons 101 FL97 FL and 140 IPLV161 IPLV

Air Cooled Chiller without Condenser Air-cooled chillers without condenser must be rated with matching condensers and comply with air-cooled chiller efficiency requirements

Computer Room Air Conditioner

Computer Room Air Handler Variable Speed Replacing constant speed CRAH with VSD CRAH

Water Cooled Centrifugal Chiller

Water Cooled Positive Displacement or Reciprocating Chiller

Uninterruptible Power Supply Must be Energy Star Certified UPS or have full load efficiency rating

ge948 for 20-100 kVA ge978for ge100 kVA

Mainframe Refresh The rated efficiency of the replacement Mainframes power supply must be at least 8 more

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 42

- Equipment Type Units IncentiveUnit

D1 Air Cooled Chiller Ton $4000 D2 Air Cooled Chiller W ithout Condenser Ton $2000 D3 Computer Room Air Conditioner Ton $3000 D4 Computer Room Air Handler Variable Speed Ton $1000 D5 Water Cooled Centrifugal Chiller Ton $3000 D6 Water Cooled Positive Displacement or Reciprocatin $3000 D7 Uninterruptible Power Supply 20-100 kVA $1000 D8 Uninterruptible Power Supply gt 100 kVA $1000 D9 Mainframe Refresh $2000

D10 Server Refresh $2000 D11 PC Power Managment System $600 D12 HVAC System Optimization $005 D1 3 HoUCold Aisle Containment kWh saved $005 D14 Server Virtualization kW reduction $40000 D1 5 Thin Clients Units $500

efficient compared to the existing Mainframes power supply The replacement Mainframe if Inactive must be decommissioned and removed from the Data Center

Server Refresh Replacement servers must be ENERGY STARreg certified Replacement servers power supply must be 5 more efficiency compared to the power supply of the replaced servers The replaced server must be decommissioned and removed from the data center

HVAC System Optimization Final system must have these features

-Implementation of free cooling by the addition of an economizer system -Conversion of constant speed CRACCRAH into variable speed operations using VFDs and additional control functionalities and -Elevation of exhaust air temperature

HotCold Aisle Containment Includes both Hot and Cold Aisles Installing new containment measures not replacing already existed aisle containment Plenum-only installations not eligible Must result in higher difference between the return air (hot aisle) and supply air (cold aisle) temperatures measured at rack intake and exhaust locations

Server Virtualization Minimum of consolidating 5 Servers virtualized into one Server The virtualized servers if inactive are removed from the Data Center

Thin Clients Must be ENERGY STAR certified thin clients Decommissioned clients are removed from the Data Center

Data Center Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 43

Whole Building Systems Whole Building Systems Approach

The Whole Building Systems approach is intended to encourage integrated energy efficient designs by providing enhanced incentives to the customer who addresses overall energy performance Owners of eligible and qualifying new construction and major renovation projects can receive Whole Building Systems incentives when energy modeling indicates the projectrsquos performance is over 10 better than the ASHRAE 901-2007 Savings from eligible electric end-uses in kilowatt hours define the amount of financial incentive Energy savings achieved through renewable energy sources are not counted toward project energy savings and are not included in the savings basis Incentive reservations obtained during the design phase of a project will be honored for up to 24 months

How to Apply for Whole Building Systems Incentives Before construction begins bull A Pre-notification Application must be submitted documenting the Owners intention to

seek Whole Building Systems incentives bull The Owner must confirm the goals and energy efficiency strategies being pursued by the

design team on the completed Pre-notification Worksheet (Checklist tab) and in the project Summary (Whole Building Performance Summary tab)

bull Submit executable building modeling software files bull Submit the Whole Building Performance Summary worksheet energy simulation model

inputs and outputs and supporting documentation bull Receive confirmation and eligibility notification from the PECO Smart Ideas team and

receive an incentive reservation bull The final incentive paid may differ from the reserved incentive amount The final

incentive will be calculated based on site-verified equipment installation and performance The Owners final application and complete documentation must be received within 6 months of equipment installation or certificate of occupancy whichever is later

bull An executable energy model and model output demonstrating compliance with the criteria of ASHRAE 901-2007 Appendix G will be required and the equipment data sheets LED lighting fixtures must be on the DLC or Energy STAR qualified products list (QPL) to be eligible LED fixtures not on the DLC or Energy STAR QPL has the option of submitting LM79 and LM80 test reports for evaluation against DLC and Energy STAR eligibility criteria

During the construction period bull Owner and design team continue to work closely with their chosen contractor to assure

energy efficiency measures are included and installed in the completed building

When the building is constructed and operational bull Complete the Owner final application Request an equipment verification site visit by the

PECO Smart Ideas team Equipment must be installed and fully operational o Program staff will schedule a site visit and utilize submitted documentation and

measurement tools to verify that the installation follows the submitted energy simulation model

bull When PECO confirms that there are no significant changes to the installed equipment payment of the reserved incentive will be made to the Owner within 6 weeks

bull If changes from the proposed design energy simulation are found the Owner and design team will be notified of the reduced incentive amount a period of 20 calendar days will

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 44

Improvement Incentive per Sq Ft

over Code

~11 to lt20 $0155

~20 to lt30 $0233

~30 to lt40 $0350

~40 to lt60 $0525

~60 $0700

be allowed for supplemental information to be provided if no additional information is received by PECO Smart Ideas team the reduced incentive payments will be made and sent to the Owner if additional clarification and information is available program staff will work diligently to resolve the discrepancies and arrive at a reasonable incentive adjustment with the customer

Payments made by PECO Smart Ideas are final

Customer Eligibility The Owner of the proposed new building project must be a customer of PECO and receive delivery of electric service from PECO to receive kilowatt-hour based incentives Please note that electricity supply can be provided by any vendor

Project Eligibility bull The project must be a new construction or major renovation Major renovations involving

the removal and redesign of at least two building systems (such as interior lighting and mechanical systems) may apply for Whole Building Systems incentives

bull To qualify for incentives projects must demonstrate energy efficiency enhancements that achieve at least 11 improvement in the proposed design versus the standard baseline

bull The Owner must submit a Pre-approval Application to the program at the stage where changes for increased energy efficiency are still feasible and construction has not been completed

bull Projects receiving Whole Building Systems incentives are not eligible to receive other incentives such as the prescriptive or custom program incentives for the same scope

bull Project components that are NOT eligible for consideration as a basis for PECO Smart Ideas include the following o Alternative fuel sources (eg use of gas or oil equipment in lieu of electric) Please note

that combined heat and power (CHP) systems will be incentivized for the electricity they produce

o Renewable energy sources (eg solar wind biomass) bull Ineligible savings include exterior lighting process receptacle miscellaneous loads and

other unregulated end-uses Custom incentives are available for new construction exterior lighting

Whole Building Systems Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 45

Custom Project Specifications Instructions for Energy Savings Calculations for Custom Projects Custom projects must involve measures that result in a reduction in electric energy use (kWh) Electricity savings may result from either efficiency improvements or fuel switching Custom Incentives are based on the first year kilowatt-hour savings Custom applications must be accompanied by detailed engineering calculations that document the annual total energy savings

The following serve as guidelines for the minimum required documentation

Equipment Information Submittals bull A list of the present and proposed equipment and components to be installed

including manufacturerrsquos catalogmodel number bull Manufacturerrsquos specification sheets showing capacities and performance for all major

components

Energy Savings Calculations Provide calculations documenting the predicted energy consumption of the existing (or baseline) and proposed system using appropriate analytical tools and clearly stated assumptions Calculations may be performed by ldquohandrdquo but spreadsheet analysis or more rigorous modeling is preferred All analysis should be provided in electronic format All assumptions such as operating hours existing and proposed equipment operational details must be presented Engineering algorithms and procedures from recognized technical organizations such as ASHRAE SMACNA ANSI etc must be used Use rated performance factors tested under accepted procedures specified by recognized rating agencies such as AHRI ANSI ASTM etc Provide an explanation when equipment performance rating conditions vary from standard conditions

In support of the calculations extensive documentation must be provided that provides the basis for the savings estimates The documentation must provide information on the equipment operating schedule daily and seasonal load profile and baseline AND energy efficient equipment performance at the operating loads Typical documentation for custom projects often includes bull Engineering or architectural drawings and ldquoequipment schedulerdquo sheets bull Component specification sheets that include part load efficiency or performance

factors bull Spreadsheet calculations or inputoutput files and results from system modeling or

other engineering analysis using accepted engineering algorithms and practices bull Log sheets trend logs from a building management system or other operating

documentation that are often necessary to document operating hours and equipment loading and used as a basis for the calculations (in some cases short term monitoring may be required to document the load profile)

bull Control sequence of operations that are necessary where controls play a part in the savings equation

Additional documentation other than that described in the application may be required for program participation Larger projects may also require pre- and post-project sub metering or monitoring of loads andor power input as part of another measurement and verification activity to demonstrate the actual energy savings that are realized

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 46

Baseline for Custom Analysis Where equipment is replaced prior to the end of its rated service life in order to achieve energy savings the existing equipment performance may be used as the baseline in the energy savings calculations Where equipment is replaced due to failure or for other reasons (such as obsolescence or a need for more capacity) the baseline performance used in the savings calculation should be either the minimum performance that would be required by code for that equipment type and application (where a code applies) or the performance of the equipment that would have been selected as the customers standard practice when a code does not apply

Baseline or Existing System Summary On custom worksheet on application form include make model number name plate information (such as operating voltage and rated full load amps) rated capacity quantities equipment condition and age facility operating hours equipment operating schedule and load curves If needed attach separate sheets

All decisions regarding incentives for custom projects are in the sole discretion of PECO

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 47

APPENDIX PROGRAM UPDATES SUMMARY (Q1 2017) Multifamily Nursing Home and Assisted Living retrofit customers need to apply for incentives through the PECO Smart Ideas Multi-Family Program administered by Franklin Energy For more information please contact Taylor Adler at tadlerfranklinenergycom or call 1-844-4BIZ-SAVE Multifamily Nursing Home and Assisted Living new construction customers can proceed with applying for incentives here

Revised Incentives

Data Centers

Measure Incentive Effective Immediately Previous Incentive

Air-cooled chiller for data centers $40ton $10ton Air-cooled chiller without condenser for data centers $20ton $10ton

Computer room air conditioner $30ton $7ton Water-cooled centrifugal chiller for data centers $30ton $5ton Water-cooled positive displacement or reciprocating chiller for data centers

$30ton $5ton

Uninterruptible power supply 20-100 kVA $10kVA $6kVA Uninterruptible power supply gt100 kVA $10kVA $1kVA Mainframe refresh $20kW installed $5kW installed Server refresh $20kW installed $4kW installed Server virtualization $400kW reduction $4kW reduction Thin clients $5units $4units

Lighting (Effective Immediately)

Measure Incentive Effective Immediately Specification Previous

Incentive Specification

New construction exterior LED outdoor flood light LED parking garage and canopy lighting LED polearm mounted parking and roadway lighting LED wall mount fixture

$005kWh (custom)

Lighting Power Density (LPD) Requirements Unchanged

$10-54 fixture

Lighting Power Density (LPD) (Wft2) by Space Type or Building Area

LED Replacement Lamps (Tubes) 2

$250lamp 5 Min Watts Reduced

$250lamp 6 Min Watts Reduced

LED Replacement Lamps (Tubes) 4

$400lamp 10 Min Watts Reduced

$400lamp 12 Min Watts Reduced

Permanent Fixture Removal $010Watt removed

Clarification of calculation to represent actual Wattage removed

$010Watt removed

Lighting (Effective 6117)

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 48

Measure Incentive Effective 6117 Specification Previous

Incentive Previous Specification

Interior LED high-bay fixtures andor retrofit kits if lt 20000 LED Lumens

$50fixture 150 Min Watts Reduced

$75fixture 150 Min Watts Reduced

Interior LED high-bay fixtures andor retrofit kits if gt 20000 LED Lumens

$75fixture 225 Min Watts Reduced

$75fixture 150 Min Watts Reduced

New Incentives

Compressed Air

Measure New Incentive Effective Immediately Variable speed air compressor $30compressor HP Compressed air system optimization $50compressor HP

HVAC

Measure New Incentive Effective Immediately ECM circulation pump $50pump Retro-commissioning cooling systems $750ton Retro-commissioning whole building $010square foot Energy management system $25ton Demand controlled ventilation $25ton Water-cooled air conditioner $22ton

Food Service

Measure New Incentive Effective Immediately Combination oven $200unit ENERGY STARreg commercial convection oven $150unit ENERGY STARreg commercial fryers $100unit ENERGY STARreg commercial hot holding cabinet $200unit

Refrigeration

Measure New Incentive Effective Immediately Air-cooled refrigeration condenser $10ton Oversized condenser with VFD $10ton Case light occupancy controls $750door

Lighting

Measure New Incentive Effective Immediately Interior central lighting controls $00175sq foot

Motors and Drives

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 49

-

Measure New Incentive Effective Immediately VFD for dust collection system motor $50HP

Application Clarifications and Revised Requirements

Clarification of LED Eligibility for New Construction or Retrofit Projects

LED Eligibility is determined by whether lighting products are listed in either the DesignLights Consortium (DLC) Qualified Products List of commercial-grade LED luminaires or the US Environmental Protection Agency database of ENERGY STAR certified products For products not yet listed contractors may submit LM79 and LM80 test reports PECO Smart Ideas engineers will review test reports to determine if the product in question meets performance specifications

Revised W 9 Requirement

W-9 forms EIN numbers are no longer required

Deletion of erroneous statement in New Construction Lighting

The following statement from previous Business Manual has been deleted ldquoThe minimum lighting power density used to calculate the incentive shall be no lower than 50 of the ASHRAE 901-2007 valuerdquo

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 50

  • Commercial amp Industrial Program Application Manual
    • Follow This Easy Process
      • Pre-Approval Application Checklist
      • Final Application Checklist
          • Terms and Conditions
            • Program Effective Dates
            • Program and Project Eligibility
            • Incentive Payment Limits
            • Application Review Process
            • Inspections andor PUCrsquos Statewide Program Evaluation
            • Requirements for Custom Project Electricity Savings Calculation
            • Tax Liability
            • No Endorsement
            • Warranties
            • Limitation of Liability
            • Assignment
            • Customerrsquos Certification
            • Termination
            • Acknowledgement
              • Retrofit Lighting Solutions
                • General Linear Fluorescent Lamp and Ballast Specification Requirements
                • LED Lamps and Fixtures
                • Minimum Watts Reduced
                • Linear LED (Tubes)
                • Permanent Fixture Removal
                  • LED Traffic Signals
                    • LED Traffic Signals Incentive Table
                      • New Construction Lighting Specifications
                        • New Construction Lighting Incentives Table
                          • New Construction Lighting Power Density Code
                              • Exterior New Construction Lighting
                              • HVAC Equipment
                                • Air-Source Air Conditioners and Air-Source Heat Pumps
                                • Package Terminal Systems (Replacements)
                                • Ductless Mini-Split Heat Pump lt54 Tons
                                • Geothermal Heat Pump
                                  • Other HVAC Equipment
                                    • Hotel Guest Room Occupancy Sensor
                                    • ECM Circulation Fan
                                    • ECM Circulation Pump
                                    • Retrocomissioning Cooling Systems
                                    • Retrocomissioning Whole Building
                                    • Energy Management System
                                    • Demand Controlled Ventilation
                                    • Other HVAC Incentives Table
                                      • Unitary HVAC Chillers
                                        • Air-Cooled Chillers Water Cooled Positive Displacement Reciprocating Chillers and Water Cooled Centrifugal Chillers
                                          • Refrigeration
                                            • Anti-Sweat Heater Controls
                                            • Evaporator Fan Controls
                                            • Floating Head Pressure Controls
                                            • Automatic Door Closers for Walk-In Coolers and Freezers
                                            • EC Motor for Walk-inReach-in Refrigerated cases or Freezer cases
                                            • ENERGY STAR Solid Door Freezer and Glass Door Freezer and Refrigerators
                                            • Refrigeration Suction Pipe Insulation
                                            • Night Cover
                                            • Strip Curtain on Walk-In CoolerFreezer
                                            • Evaporator Coil Defrost Control
                                            • Variable Speed Refrigeration Compressor
                                            • Add Doors to Open Refrigerated Cases
                                            • Door Gaskets
                                            • Zero Energy Doors
                                            • Air Cooled Refrigeration Condenser
                                            • Oversized Condenser with VFD
                                            • Case Light Occupancy Controls
                                            • LED Open Case Lighting
                                            • LED Enclosed Case Lighting Refrigerated
                                            • LED Enclosed Case Lighting Freezer
                                              • Food Service
                                                • Beverage and Snack Machine Controls
                                                • ENERGY STARreg Refrigerated Beverage Vending Machines
                                                • ENERGY STARreg Electric Steam Cooker
                                                • ENERGY STARreg Electric Combination Oven
                                                • ENERGY STARreg Commercial Convection Oven
                                                • ENERGY STARreg Commercial Fryers
                                                • ENERGY STARreg Commercial Hot Holding Cabinet
                                                  • Motors and Variable Frequency Drives
                                                    • Early Replacement Motors
                                                    • Variable Frequency Drives on HVAC Fan Applications
                                                    • Variable Frequency Drives on Pump Applications
                                                    • Variable Speed Control for Kitchen Exhaust Hoods
                                                    • Variable Speed Drives for Process or Other Equipment
                                                      • Domestic Hot Water
                                                        • Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater
                                                        • Heat Pump Water Heater
                                                        • Low Flow Pre-Rinse Spray Valve
                                                        • Domestic Hot Water Incentive Table
                                                          • Compressed Air Systems
                                                            • No-loss Condensate Drain
                                                            • Air-Entraining air nozzle
                                                            • Storage Tanks for LoadNo Load Screw Compressors
                                                            • Cycling Refrigerated Thermal Mass Dryer
                                                            • Variable Speed Air Compressor
                                                            • Compressed Air System Optimization
                                                            • Compressed Air Systems Incentive Table
                                                              • Data Centers
                                                                • Air Cooled Chiller
                                                                • Air Cooled Chiller without Condenser
                                                                • Computer Room Air Conditioner
                                                                • Computer Room Air Handler Variable Speed
                                                                  • Replacing constant speed CRAH with VSD CRAH
                                                                    • Water Cooled Centrifugal Chiller
                                                                    • Water Cooled Positive Displacement or Reciprocating Chiller
                                                                    • Uninterruptible Power Supply
                                                                    • Mainframe Refresh
                                                                    • Server Refresh
                                                                      • Whole Building Systems
                                                                        • Whole Building Systems Approach
                                                                        • How to Apply for Whole Building Systems Incentives
                                                                        • Customer Eligibility
                                                                        • Project Eligibility
                                                                        • Whole Building Systems Incentives Table
                                                                          • Custom Project Specifications
                                                                            • Instructions for Energy Savings Calculations for Custom Projects
                                                                            • Equipment Information Submittals
                                                                            • Energy Savings Calculations
                                                                            • Baseline for Custom Analysis
                                                                            • Baseline or Existing System Summary

ENERGY STAR Solid Door Freezer and Glass Door Freezer and Refrigerators 32

Refrigeration Suction Pipe Insulation 33

Night Cover 33

Strip Curtain on Walk-In CoolerFreezer 33

Evaporator Coil Defrost Control 33

Variable Speed Refrigeration Compressor 33

Add Doors to Open Refrigerated Cases 33

Door Gaskets 33

Zero Energy Doors 34

Air Cooled Refrigeration Condenser 34

Oversized Condenser with VFD 34

Case Light Occupancy Controls 34

LED Open Case Lighting 34

LED Enclosed Case Lighting Refrigerated 34

LED Enclosed Case Lighting Freezer 34

Food Service 36

Beverage and Snack Machine Controls 36

ENERGY STARreg Refrigerated Beverage Vending Machines 36

ENERGY STARreg Electric Steam Cooker 36

ENERGY STARreg Electric Combination Oven 36

ENERGY STARreg Commercial Convection Oven 36

ENERGY STARreg Commercial Fryers 36

ENERGY STARreg Commercial Hot Holding Cabinet 36

Motors and Variable Frequency Drives 38

Early Replacement Motors 38

Variable Frequency Drives on HVAC Fan Applications 38

Variable Frequency Drives on Pump Applications 38

Variable Speed Control for Kitchen Exhaust Hoods 38

Variable Speed Drives for Process or Other Equipment 38

Domestic Hot Water 39

Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater 39

Heat Pump Water Heater 39

Low Flow Pre-Rinse Spray Valve 39

Domestic Hot Water Incentive Table 39

Compressed Air Systems 40

No-loss Condensate Drain 40

Air-Entraining air nozzle 40

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 3

Storage Tanks for LoadNo Load Screw Compressors 40

Cycling Refrigerated Thermal Mass Dryer 40

Variable Speed Air Compressor 40

Compressed Air System Optimization 41

Compressed Air Systems Incentive Table 41

Data Centers 42

Air Cooled Chiller 42

Air Cooled Chiller without Condenser 42

Computer Room Air Conditioner 42

Computer Room Air Handler Variable Speed 42

Replacing constant speed CRAH with VSD CRAH 42

Water Cooled Centrifugal Chiller 42

Water Cooled Positive Displacement or Reciprocating Chiller 42

Uninterruptible Power Supply 42

Mainframe Refresh 42

Server Refresh 43

Whole Building Systems 44

Whole Building Systems Approach 44

How to Apply for Whole Building Systems Incentives 44

Customer Eligibility 45

Project Eligibility 45

Whole Building Systems Incentives Table 45

Custom Project Specifications 46

Appendix Program Updates Summary (Q1 2017) 48

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 4

PECO Smart Ideas for Your Business

Commercial amp Industrial Program Application Manual

Program is offered and incentive values and measures contained in this application are valid from June 1 2016 to May 31 2021 or until funds are exhausted

Incentive values and measures may be modified or terminated at any time without prior notice

Follow This Easy Process

Step 1 Verify your Eligibility Applicant must verify that they are a business customer of PECO (commercial industrial

governmental institutional and non-profit) Multifamily applicants may also apply Detailed information is posted on wwwpecocomsmartideas

Project must be a new facility improvement that results in an improvement in electric energy efficiency (kWh) andor a permanent reduction in electric energy usage

All equipment must be installed in facilities served by PECO with a valid PECO account number on an eligible PECO non-residential rate

Refer to the technical specifications in this Application Manual to check eligibility of equipment for incentives

Step 2 Submit Pre-approval Application to Reserve Funds

A pre-approval application must be submitted before you purchase equipment or technology for which the incentive is being requested Applications can be submitted via online mail email or fax

Email pecosmartideasdnvglcom

Mail PECO Smart Ideas for Your Business

4377 County Line Road Chalfont PA 18914

Fax

215-996-3982

Incentive funds will be reserved when your prendashapproval application is approved Complete the Applicant Information form for each of the measures that you are installing

Lighting projects require a lighting worksheet and inventory to be completed in addition to the application form You may submit the application via mail fax or e-mail

For some projects a pre-installation inspection will be required Most projects require documentation of the equipment being replaced

Incentive funds are reserved for 90 days Contact the PECO Smart Ideas team for specific questions regarding funding reservations and extensions

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 5

Step 3 Install Equipment or Perform Project Work The equipment installed must meet or exceed the specifications and requirements found

in measures tables and detailed in the Application Manual Equipment must be installed within the program period

Step 4 Submit Final Application Submit a final application as soon as possible after the project is completed within 90 days of

project completion but no later than May 15 2021 The final application is the same form as the pre-approval application Include the following documentation with your final application customercontractor information a signed final application agreement itemized invoices specifications and an updated scope of work

The program team will review your final application For some projects a final inspection will be part of the final review

The program team will send incentive checks four to six weeks after your final application is approved

If you need assistance please contact our program hotline 866-371-9343

Please visit our website wwwpecocomsmartideas

Pre-Approval Application Checklist Final Application Checklist

Registration Number on Application Signed Final Agreement Form (if applicable) Itemized Invoices

Documentation of existing equipment for Equipment SpecificationsCut Sheets for retrofit projects changes in equipment

Lighting worksheet for lighting projects Certificate of Occupancy (for New Equipment SpecificationsCut Sheets Construction projects only)

Updated Scope if project changed (please Copy of Current PECO Bill advise program staff during installation if Customer Signature on Customer

Acknowledgement scope changes Increase in incentive amount is not guaranteed)

Supporting Documentation Guidelines

Lighting Please attempt to submit photos of existing lighting Projects gt750000 kWh require lighting logging data DLCENERGY STAR certification documentation submittal will streamline review process Plansengineering submittals will be requested for large projects Square footage for centrally-controlled lighting control systems may be required

VFDs Nameplate photos andor engineering schedules of existing motors

Custom or lsquolargersquo (gt250000 KWh) mechanical projects MampV plan will be required for larger projects Program engineers will contact participants to establish MampV protocols

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 6

Terms and Conditions

PECO Energy Company (PECO) is offering prescriptive and custom incentives under the PECO Smart Ideas for Your Business to facilitate the implementation of cost-effective energy efficiency measures for commercial and industrial customers Any and all energy savings or environmental credits generated by the project described in this application will be retained by PECO

Funds are limited and subject to availability The program may be modified or terminated without prior notice

Program Effective Dates

The program is available until May 31 2021 The current cycle year runs from June 1 2016 through May 31 2017 (lsquoProgram Year Eightrsquo) Incentives are offered until approved funds are exhausted or until May 15 2021 whichever comes first All projects must be completed and the final applications received no later than May 15 2021 to be eligible for incentives

Program and Project Eligibility

Smart Ideas for Your Business incentives are available for the common energy efficiency measures listed in this Application Manual Program incentives are available under PECO Smart Ideas for Your Business to non-residential customers within PECOs service territory These incentives are available to all customers who pay into the Energy Efficiency Charge and receive their electricity over PECOrsquos distribution network regardless of the retail electric supplier

Most commercial projects involving energy savings are eligible Incentives are available for both prescriptive and custom measures Prescriptive measures are energy efficiency measures with pre-determined savings and incentive levels and are paid on a per unit basis These measures are available for specific Lighting HVAC Refrigeration and Food Service Variable SpeedFrequency Drives Compressed Air and Domestic Water Heater measures Custom measures include energy efficiency measures not listed on the prescriptive application forms Custom incentives must be approved by PECO in advance are determined on a case-by-case basis and are paid per unit of energy (kWh) saved Examples of projects that are NOT eligible for PECO Smart Ideas for Your Business include onndashsite electricity generation projects focused primarily on power factor improvement and renewable energy projects

Installation must be at the customerrsquos facility and provide 100 of the energy benefits as stated in the application for a period of five years or for the life of the product whichever is less PECO has the right to claim a pro-rated amount of any incentive paid if the customer ceases to be a distribution customer of PECO or removes the equipment or systems at any time during the five-year period or the life of the measure

Incentive Payment Limits

Prescriptive and custom incentives cannot exceed 100 of the customerrsquos total costs Contractor labor costs can be considered in the total project cost while customer internal labor costs cannot

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 7

Application Review Process

Pre-approval is required for all projects A pre-approval application must be submitted before you purchase equipment or technology for which the incentive is being requested Pre-approval is not a guarantee of program acceptance Completed applications will be reviewed in the order received The location or business name on the invoice must be the same as the application information The incentive is reserved for the project when PECO receives a complete preshyapproval application and determines that the project meets the program eligibility requirements Applicants who submit incomplete applications will be notified of deficiencies upon review of the application and could lose their place in line in the review process until all requested information is received Applicants are encouraged to call the program hotline if they have any questions about documentation requirements

PECO will review final applications for eligibility and completeness The final application and all required supporting documentation must be received within 90 days of project completion but no later than May 15 2021 to be eligible for incentives Project documentation including original dated invoices for the purchase and installation of the measures andor product specification sheets is required

The project invoice must provide sufficient detail to separate the project cost from the cost of other services such as repairs and building code compliance PECO reserves the right to request additional supporting documentation necessary to ensure measure eligibility and verify that the expected energy savings will occur Requested information may include but is not limited to equipment purchase dates installation dates proof that the equipment is operational manufacturer specifications warranty information and proof of customer co-payment PECO will make every effort to maintain the confidentiality of customer information except that such information must be provided to the PA PUC and its contractor as well as PECOrsquos contractor for measurement and evaluation

The installed measures are not eligible for incentives from other PA Act 129 Phase 3 Energy Efficiency Programs

Inspections andor PUCrsquos Statewide Program Evaluation

PECO its agents measurement and verification contractor andor the PUC statewide program evaluator have the right to audit or inspect all projects to verify compliance with the program rules and verify the accuracy of project documentation This may include pre-installation andor post-installation inspections detailed lighting layout descriptions metering data collection interviews and utility bill data analyses The customer must allow access to project documents and the facility where the measures were installed for a period of five years after receipt of incentive payment by PECO

Requirements for Custom Project Electricity Savings Calculation

The annual electricity savings must be calculated for custom projects using industry accepted engineering algorithms or simulation models The applicant must estimate the annual electricity usage of both the existing and proposed equipment based on the current operation of the facility If the existing equipment is at the end of its rated useful life the applicant must substitute equipment that would meet the applicable federal and local energy codes as the baseline when calculating the annual energy savings The applicant must be able to clearly describe the method used to calculate the savings The applicant must provide all assumptions used in the calculations and document the source for these assumptions Further information on custom measures can be found in the Application Manual which can be downloaded from

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 8

wwwpecocomsmartideasThe method and assumptions used by the applicant to calculate the annual savings will be reviewed by PECO PECO has sole and final determination of the annual energy savings to be used in calculating the incentive amount PECO also reserves the right to require specific measurement and verification activities including monitoring both before and after the retrofit and to base the incentive payment on the results of these activities

PECO may need to conduct inspections both before and after the retrofit projects to verify equipment and operation conditions Pre-approval application must be submitted while the existing equipment is still in operation in order to allow PECO the opportunity to view the existing equipment

Tax Liability

Incentives may be taxable for most taxpayers If the incentive is more than $600 it will be reported to the IRS and the customer will be provided with an IRS form 1099 unless the customer is exempt PECO is not responsible for any tax liability that may be imposed on any customer as a result of the payment of program incentives All customers must supply their Federal Tax Identification number to PECO in order to receive a Program Incentive Please consult with your tax professional for information on the tax treatment of the incentives

No Endorsement

PECO does not endorse support or recommend any particular manufacturer product or system design in promoting this program and PECO does not guarantee any specific level of energy savings with respect to any product system design or energy efficiency measure

Warranties

PECO DOES NOT WARRANT THE PERFORMANCE OF INSTALLED EQUIPMENT ANDOR SERVICES RENDERED AS PART OF THIS PROGRAM EITHER EXPRESSLY OR IMPLICITLY NO WARRANTIES OR REPRESENTATIONS OF ANY KIND WHETHER STATUTORY EXPRESSEDOR IMPLIED INCLUDING WITHOUT LIMITATIONS WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE REGARDING EQUIPMENT OR SERVICES PROVIDED BY A MANUFACTURER OR VENDOR CONTACT YOUR VENDORSERVICES PROVIDER FOR DETAILS REGARDING PERFORMANCE AND WARRANTIES

Limitation of Liability

By virtue of participating in this program customers agree to waive any and all claims or damages against PECO except the receipt of the program incentive if eligible Participating Customers agree that PECOrsquos liability in connection with this program is limited to paying the program incentive specified Under no circumstances shall PECO its representatives agents or subcontractors be liable for any lost profits special punitive consequential or incidental damages or for any other damages or claims connected with or resulting from participation in this program

Assignment

Customers may assign a portion or all of their program incentive payment to a specified vendor

Customerrsquos Certification Customer certifies that heshe purchased and installed the equipment listed in the application Customer agrees that all information is true and that heshe has conformed to all of the program and equipment requirements listed in the application

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 9

Termination

PECO reserves the right to extend modify (this includes modification of program incentive levels) or terminate this program without prior or further notice

Acknowledgement

I have read understood and am in compliance with all rules and regulations concerning this incentive program I certify that all information provided is correct to the best of my knowledge and I give PECO permission to share my records with the Pennsylvania PUC and agents representatives and contractors it selects to manage coordinate or evaluate the program Additionally I hereby authorize PECO to have reasonable access to my property to inspect the installation and performance of the equipment and installations that are eligible for incentives under the guidelines of the program

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 10

Retrofit Lighting Solutions

General Linear Fluorescent Lamp and Ballast Specification Requirements 32w 4ft HPT8 and reduced wattage T8 lamps must be listed on the Consortium of Energy Efficiency (CEE) product list or must meet CEE standards For further information visit wwwcee1org

LED Lamps and Fixtures The integral lamp or fixture must appear on the Energy Star Qualified Products List or the Design Lights Consortium Qualified Products List

bull Energy Star Qualified Fixture Product List httpwwwenergystargov bull Energy Star Qualified Integral LED lamps httpwwwenergystargov bull Design Lights Qualified Product List httpwwwdesignlightsorg

Minimum Watts Reduced Energy efficient fixtureslamps are required to be lower in load than existing fixtureslamps by specified levels the Minimum Watts Reduced Each lighting measure has its own Minimum Watts Reduced that must be met as eligibility requirement These levels are listed in the lighting worksheet ldquoLighting Incentives Tablersquo tab and reproduced below

Linear LED (Tubes) Linear LED lamps must be listed on the Design LightsTM Consortium (DLC) Qualified Products List

Type A LEDs bull Type A LED linear lamps are powered by a fluorescent ballast bull If present existing magnetic ballast must be removed and replaced with a compatible energy- efficient electronic ballast bull DLC Primary Use Requirement ndash DLC-listed equipment must be classified with one of the following Primary Use designations

o Replacement Lamps (Plug and Play) (UL Type A) bull Label must be affixed to the interior of fixture in a prominent location Label should indicate that the fixture has been retrofitted with

TLEDs and that fluorescent lamps should not be installed as replacements

Type B LEDs bull Type B LED tubes are powered by an internal driver bull Existing fluorescent ballast must be removed and fixturersquos incoming power wires are connected directly to the lamp sockets Strict

adherence to installation instructions is critical when rewiring existing fixtures

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 11

bull The LED linear lamps must be delivered as part of a UL 1598C Classified Luminaire Retrofit Kit with instructions explaining the LED linear lamps must be installed on a luminaire that is already UL Listed

bull The retrofitted luminaire must be clearly identified using the label included with the Retrofit Kit indicating that the luminaire has been modified and can no longer operate the originally intended fluorescent lamp(s)

Type C LEDs

bull Type C LED linear lamps are powered by an external driver bull Existing fluorescent ballast must be removed and replaced with a compatible external driver bull DLC Primary Use Requirement ndash DLC-listed equipment must be classified with one of the following Primary Use designations

o 2-lamp External Driver Lamp-Style Retrofit Kits (UL Type C) o 3-lamp External Driver Style Retrofit Kits (UL Type C) o 4-lamp External Driver Lamp-Style Retrofit Kits (UL Type C)

bull Technical specifications (manufacturerrsquos cut sheet) for the driver must be submitted with the application

Permanent Fixture Removal This measure is to be used only in conjunction with lighting retrofits and is intended for spaces that are currently over lit Incentives are paid $010watt reduced only on fixtures removed not on total watts reduced for entire projects Overall net lumen reduction must be achieved in order to qualify for a permanent fixture removal incentive

Example

(20) Existing fixtures at 10000 lumens each = 200000 lumens

(14) Proposed fixtures at 15000 lumens each = 210000 lumens

Since there is not a net reduction in lumens the six fixtures removed would not be eligible for a permanent fixture removal incentive

It is encouraged that spaces meet recommended foot-candle levels as detailed by IESNA Lighting Design Guide A Program Engineer will evaluate lumens reduction based on the type of fixtures removed and the DLC lumens rating of the fixtures installed

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 12

RETROFIT INTERIOR LIGHTING TABLE

Measure Code

Min Measure Name Watts Incentive Unit

Reduced Technical Specifications

CFL Lighting

CFL1A ENERGY STAR Hard-Wired CFL fixture Indoor AccentTrack 20 $250 lamp

Only complete new fixtures or modular hardwired retrofits with hardwired electronic ballasts qualify

CFL ballast must be programmed start or programmed rapid start with a power factor (PF) ge 090 and a total

harmonic distortion (THD) le 20 Screw-in CFLs are not eligible for this incentive

CFL1B ENERGY STAR Hard-Wired CFL fixture Indoor Directional WallCeiling Mount 20 $250 lamp

CFL1C ENERGY STAR Hard-Wired CFL fixture Indoor Omni-Directional WallCeiling Mount 20 $250 lamp

CFL2A ENERGY STAR Hard-Wired CFL fixture Indoor Portable LampTorchiere 20 $1 lamp

CFL2B ENERGY STAR Hard-Wired CFL fixture Indoor Recessed Downlight 20 $1 lamp

CFL2C ENERGY STAR Hard-Wired CFL fixture Indoor Recessed Downlight Retrofit Module 20 $1 lamp

CFL2D ENERGY STAR Hard-Wired CFL fixture Indoor Under CabinetStrip 20 $1 lamp

CFL3A ENERGY STAR Hard-Wired CFL fixture Outdoor Directional WallCeilingGroundPole Mount 30 $3 lamp

CFL3B ENERGY STAR Hard-Wired CFL fixture Outdoor Omni-Directional WallCeilingGroundPole Mount 30 $3 lamp

CFL3C ENERGY STAR Hard-Wired CFL fixture Outdoor Recessed Downlight 30 $3 lamp

CFL3D ENERGY STAR Hard-Wired CFL fixture Outdoor Recessed Downlight Retrofit Module 30 $3 lamp

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 13

Fluorescent Lighting FL1 Interior T5 New Fluorescent Fixture w Electronic Ballast 11 $5 fixture Any T5 is eligible

FL2 T5HO High-Bay Fixture 54 $25 fixture Fixture efficiency must be gt 90

High bay fixtures must be installed at least 15ft above finished floor

FL3 HPT8 High-Bay Fixture 82 $20 fixture Must use High Ballast Factor (gt96) Fixture efficiency must be gt= 85

High bay fixtures must be installed at least 15ft above finished floor

FL4 HPT8 Fixture 20 $5 fixture Must use Low Ballast Factor (lt80)

FL5 RW T8 Lamp - Lamp only 10 $3 lamp Existing T8 fixture re-ballasting to a higher ballast factor are not eligible

HID Measures HID1 Ceramic HID - 25 -39 Watt 95 $13 fixture

Replacing higher wattage HID or High Pressure Sodium or Mercury Vapor

Interior replacements only

HID2 Ceramic HID - 70 Watt 155 $13 fixture HID3 Ceramic HID - 100 Watt 170 $15 fixture HID4 Pulse Start HID - 150 nominal Watts 72 $10 fixture HID5 Pulse Start HID - 350 nominal Watts 100 $13 fixture

HID6 Pulse Start HID - 1000 nominal Watts 400 $15 fixture

Interior LED Fixtures

LED1 ENERGY STAR Integral LED fixture Indoor Recessed Downlight Retrofit Module 38 $7 fixture Retrofit module of existing recessed fixture

LED2 ENERGY STAR Integral LED fixture Indoor Recessed Downlight 38 $7 fixture

New indoor recessed downlight fixture LED3 ENERGY STAR Integral LED fixture Indoor Portable LampTorchiere 30 $7 fixture

LED4 LED AccentTrack Lighting Fixtures 32 $6 head

LED5 LED Low-Bay Fixtures 150 $20 fixture For replacement of HID fixtures mounted le 15 above finished floor

LED6 LED Low-Bay Retrofit Kits 150 $20 fixture

LED8 LED Troffer Fixtures and Retrofit Kits 5 $10 fixture Troffers typically installed in lay-in ceilings 2x2 2x4 configuration

LED9 LED Surface and Suspended Linear Fixtures 25 $10 fixture Examples of LED surface-mounted luminaires include wrap vapor tight and strip fixtures (non-cooler)

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 14

-

Interior LED High Bay Fixtures

LED10A LED High-Bay Fixtures le 20000 LED lumens 150 $50 fixture

High bay fixtures must be installed at least 15ft above finished floor

LED10B LED High-Bay Fixtures gt 20000 LED lumens 225 $75 fixture

LED11A LED High-Bay Retrofit Kits le 20000 LED lumens 150 $50 fixture

LED11B LED High-Bay Retrofit Kits gt20000 LED lumens 225 $75 fixture

LED Parking Garage and Canopy Fixtures

LED12 LED Parking Garage and Canopy Fixtures and Retrofit Kits Outdoor lt= 5000 LED lumens 50 $15 fixture

Fixtures must be physically installed in a parking garage (area where vehicles are physically parked) or

fuel pump canopy Typically represents replacement of le175 W Metal

Halide or equivalent

LED13 LED Parking Garage and Canopy Fixtures and Retrofit Kits Outdoor 5001 - 10000 LED lumens 70 $30 fixture

Typically represents replacement of Metal Halide or equivalent greater than 175W and less than 400W

Product must be installed in a parking garage (area where vehicles are physically parked) or fuel pump

canopy

LED14 LED Parking Garage and Canopy Fixtures and Retrofit Kits Outdoor gt 10000 LED lumens 150 $50 fixture

Typically represents replacement of ge400 W Metal Halide or equivalent

Product must be physically installed in a parking garage (area where vehicles are physically parked) or

fuel pump canopy LED Screw in Lamps

ESLED1 ENERGY STAR Screw-in LED Bulb (Decorative Globe) 14 $5 lamp Lamp with globe shape such as type G

ESLED2 ENERGY STAR Screw-in LED Bulb (Decorative non-globe 14 $5 lamp Lamps with non-globe or candle-like shape such as type B C CA F

ESLED3 ENERGY STAR Screw-in LED Bulb and Low Voltage Mini-Reflector Bulbs (DirectionalReflector) 14 $5 lamp ANSI standard PAR and MR type lamps

ESLED4 ENERGY STAR Screw-in LED Bulb (Standard) 14 $5 lamp Lamp such as A series

ESLED5 ENERGY STAR Screw-in LED Bulb (Standard 3-Way) 14 $5 lamp Lamp such as A series with three light levels

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 15

- -LED Screw in Lamps Smart Bulbs

ESLED6 ENERGY STAR Screw-in LED Bulb (Decorative Globe Smart Bulb) 14 $5 lamp Lamp with globe shape such as type G

ESLED7 ENERGY STAR Screw-in LED Bulb (Decorative non-globe Smart Bulb) 14 $5 lamp Lamps with non-globe or candle-like shape such as

type B C CA F

ESLED8 ENERGY STAR Screw-in LED Bulb (DirectionalReflector Smart Bulb) 14 $5 lamp ANSI standard PAR lamps

ESLED9 ENERGY STAR Screw-in LED Bulb (Standard Smart Bulb) 14 $5 lamp Lamp such as A series

LED Tubes (replacing fluorescent)

TLED1 LED Replacement Lamps (Tubes) 2 5 $250 lamp Refer to Lighting Technical Specifications for requirements DLC Type A B and C are eligible bullType B linear (Interior driver) LEDs have the following installation requirements

bullExisting fluorescent ballast must be removed and fixturersquos incoming power wires are connected directly to the lamp sockets Strict adherence to installation instructions is critical when rewiring existing fixtures bullThe LED linear lamps must be delivered as part of a UL 1598C Classified Luminaire Retrofit Kit with instructions explaining the LED linear lamps must be installed on a luminaire that is already UL Listed bullThe retrofitted luminaire must be clearly identified using the label included with the Retrofit Kit indicating that the luminaire has been modified and can no longer operate the originally intended fluorescent lamp(s)

TLED2 LED Replacement Lamps (Tubes) 4 10 $4 lamp

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 16

LED Exterior Lighting

ELED1 ENERGY STAR Integral LED fixture Outdoor Recessed Downlight Retrofit Module 24 $10 module

ENERGY STAR or DLC Qualified fixtures ELED2 ENERGY STAR Integral LED fixture Outdoor Recessed

Downlight 24 $10 fixture

ELED3 LED Outdoor Flood Light Fixtures lt= 5000 LED lumens 50 $10 fixture Typically represents replacement of le175 W Metal Halide or equivalent Fixtures must be DLC qualified

ELED4 LED Outdoor Flood Light Fixtures gt 5000 LED lumens 70 $15 fixture Typically represents replacement of Metal Halide or equivalent greater than 175W Fixtures must be DLC qualified

ELED5 LED PoleArm Mounted Parking and Roadway Fixtures and Retrofit Kits lt= 5000 LED lumens 50 $25 fixture Typically represents replacement of le175 W Metal

Halide or equivalent Product must be DLC qualified

ELED6 LED PoleArm Mounted Parking and Roadway Fixtures and Retrofit Kits Outdoor gt 10000 LED lumens 150 $75 fixture

Typically represents replacement of Metal Halide or equivalent greater than 400W Product must be DLC

listed

ELED7 LED PoleArm Mounted Parking and Roadway Fixtures and Retrofit Kits Outdoor 5001 - 10000 LED lumens 70 $50 fixture

Typically represents replacement of Metal Halide or equivalent greater than 175W and less than 400W

Product must be DLC listed

ELED8 LED Wall Mount Fixtures and Retrofit Kits Outdoor lt= 5000 LED lumens 50 $25 fixture Typically represents replacement of le175 W Metal

Halide or equivalent Product must be DLC qualified

ELED9 LED Wall Mount Fixtures and Retrofit Kits Outdoor gt 5000 LED lumens 70 $50 fixture

Typically represents replacement of Metal Halide or equivalent greater than 175W Product must be DLC

qualified Permanent Fixture Removal

PFRA Indoor Permanent Fixture Removal combined with lighting retrofit na $010 watt removed Incentive only valid when units = ldquofixturerdquo in this table

Incentive is only offered when net lumens are reduced PFRB Outdoor Permanent Fixture Removal combined with lighting retrofit na $010 watt removed

Other LED Lighting LEDEXIT LED Exit Sign

na

$2 sign Replacing Incandescent or Fluorescent

SIGN1A Indoor LED Channel Signage $8 letter

Replacing Neon SIGN1B Outdoor LED Channel Signage $8 letter

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 17

Lighting Controls

CTL Unitary Sensor Controls

na

$1500 sensor

Passive infrared ultrasonic detectors are eligible Includes daylighting controls and all occupancy controls

Controls can be onoff stepped or continuous (dimming) Daylight sensor controls are required to be commissioned in order to ensure proper sensor calibration and energy savings

Minimum of 30 watts controlled per control

CLC Interior Central Lighting Controls $00175

square foot of area

under control

Automated central lighting control systems with override capabilities

This measure includes centrally-controlled time clocks wireless on off switches bi level switches computer based

controls pre-set scene selection dimmable ballasts and on-off dimmer switches for non-personal tuning

Floor plan must be submitted verifying square footage

DAYOCC Controls Combination - Daylighting and Occupancy Fixture Mounted $1500 sensor Minimum of 30 watts controlled per control

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 18

LED Traffic SignalsThis measure applies to the early replacement of existing incandescent traffic lights and pedestrian signals with LEDs New LED traffic signals must comply with ENERGY STAR requirements which can be found at httpswwwenergystargoviapartnersproduct_specseligibilitytraffic_eligpdf98bfshy1786

LED Traffic Signals Incentive Table

Round Traffic Signals 8 Red

Incentive per Signal

$15

8 Yellow 8 Green 12 Red

12 Yellow 12 Green

Turn Arrow Signals

8 Red

$13

8 Yellow 8 Green 12 Red

12 Yellow 12 Green

Pedestrian Signals

9 Pedestrian Only

$13

12 Hand Only 12 Pedestrian Only 12 Countdown Only

12 Pedestrian and Hand Overlay 16 Pedestrian and Hand Side by

Side 16 Pedestrian and Hand Overlay

16 Hand and Countdown Side-by-Side

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 19

Lighting Controls that Exceed Code Requirements

New Construction Lighting SpecificationsUnder the Lighting Power Density Approach the lighting power installed is compared with the lighting power allowed by code Incentives are available for systems where the installed lighting power is lower than the code-allowed power by at least 10 Savings are based on the Lighting Power Density (LPD) calculated on a watts per square foot basis Incentives will be paid only on the area of the building where the lighting installation is complete and is ready for occupancy If a portion of a building is not built-out such that the lighting in an area is not complete and ready for occupancy then that portion is not eligible for an incentive Baseline lighting power density is based on ASHRAE 901- 2007 Either the Space-by-Space or Building Area method may be used to calculate the LPD for the purposes of the incentive

Required Documentation bull Lighting Worksheet bull COMcheck Interior Lighting Report or equivalent analysis demonstrating space-byshy

space or building area calculations bull Reflected ceiling plans and electrical plan sheets showing lighting fixture layout bull Lighting fixture schedule sheet including fixture counts bull Fixture submittal or specification sheets showing model number and rated fixture wattage bull Architectural floor plans displaying floor area affected by proposed lighting installation

New Construction Lighting Incentives Table Lighting Wattssq ft

Improvement over of Code Incentive

gt= 10 and lt 20 $0035sq gt= 20 and lt 30 $007sq ft gt= 30 and lt 40 $0105sq

gt= 40 $021 sq ft

Incentives will be paid on a ($005kWh) custom basis Please contact Program Staff for eligibility of lighting controls for New Construction projects

Interior Occupancy Sensors Incentives are offered for occupancy-based controls in areas where they are not required by code Passive infrared ultrasonic detectors and fixture-integrated sensors or sensors with a combination sensor are eligible All sensors must be hard-wired and control interior lighting fixtures The incentive is per Watt controlled An inventory of the controlled fixtures and their wattage must be provided for each sensor with the Final Application

Daylight Dimming System Incentives are offered for daylight sensor controls in spaces with suitable available ambient light for at least part of the day Light may be through skylights clerestories windows or ldquolight tubesrdquo The controls can be onoff stepped or continuous dimming The onoff controller should turn off artificial lighting when the interior illuminance meets the desired indoor lighting level The stepped controller generally dims the artificial lighting 50 when the interior illuminance levels reach 50 of the desired lighting levels Continuous or dimming controllers dim artificial lighting proportionally to the available ambient light All types of daylight sensor controls are required to be commissioned in order to ensure proper sensor calibration and energy savings

Required Documentation bull Cut sheets or submittals of lighting control systems Reflected ceiling plans or schedule

showing which fixtures are controlled by lighting controls

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 20

New Construction Lighting Power Density CodeRequirements ndash Space by Space Method

Building Specific Space Types LPD (Wft2) Building Specific Space Types LPD (Wft2)

GymnasiumExercise Center AutomotivemdashServiceRepair 07

Playing Area 14 Manufacturing

Exercise Area 09 Low (lt25 ft Floor to Ceiling Height) 12

CourthousePolice StationPenitentiary High (gt25 ft Floor to Ceiling Height) 17

Courtroom 19 Detailed Manufacturing 21

Confinement Cells 09 Equipment Room 12

Judges Chambers 13 Control Room 05

Fire Stations HotelMotel Guest Rooms 11 Fire Station Engine Room 08 DormitorymdashLiving Quarters 11

Sleeping Quarters 03 Museum

Post Office-Sorting Area 12 General Exhibition 10 Convention Center-Exhibit Space 13 Restoration 17

Library BankOfficemdashBanking Activity Area 15 Card File and Cataloging 11 Religious Buildings

Stacks 17 Worship Pulpit Choir 24

Reading Area 12 Fellowship Hall 09

Hospital Retail

Emergency 27 Sales Area [For accent lighting see 93121(c)] 17

Recovery 08 Mall Concourse 17

Nurse Station 10 Sports Arena

ExamTreatment 15 Ring Sports Area 27

Pharmacy 12 Court Sports Area 23

Patient Room 07 Indoor Playing Field Area 14

Operating Room 22 Warehouse

Nursery 06 Fine Material Storage 14

Medical Supply 14 MediumBulky Material Storage 09

Physical Therapy 09 Parking GaragemdashGarage Area 02

Radiology 04 Transportation

LaundrymdashWashing 06 AirportmdashConcourse 06

AirTrainBusmdashBaggage Area 10

TerminalmdashTicket Counter 15

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 21

New Construction Lighting Power Density CodeRequirements ndash Building Area Method

Building Area Type 221 LPD (Wft2)

Automotive facility 09

Convention center 12

Courthouse 12

Dining bar loungeleisure 13

Dining cafeteriafast food 14

Dining family 16

Dormitory 1

Exercise center 1

Gymnasium 11

Health-care clinic 1

Hospital 12

Hotel 1

Library 13

Manufacturing facility 13

Motel 1

Motion picture theater 12

Building Area Type LPD (Wft2)

Multifamily 07

Museum 11

Office 1

Parking garage 03

Penitentiary 1

Performing arts theater 16

Policefire station 1

Post office 11

Religious building 13

Retail 15

Schooluniversity 12

Sports arena 11

Town hall 11

Transportation 1

Warehouse 08

Workshop 14

221 In cases where both a common space type and a building specific type are listed the building specific space type shall apply

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 22

Exterior New Construction LightingExterior New Construction savings over code lighting power density will be incentivized using custom lighting measure at $005kWh rate Participants must submit exterior lighting plans Submittals COMCHECK REPORT and lighting schedule for exterior lighting Savings are calculated from the LPD (Wsq ft) indicated below Additional information may be required based on the building exterior type and space description indicated below To contribute to incentive LEDs must satisfy program requirements for DLC Energy Star or equivalent listing

Required Documentation bull COMcheck Interior Lighting Report or equivalent analysis demonstrating space-by-space or

building area calculations bull Drawings showing lighting fixture layout bull Lighting fixture schedule sheet including fixture counts bull Fixture submittal or specification sheets showing model number and rated fixture wattage

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 23

Building Exterior Space Description LPD

Unco erect Pariki Ilg Area Parlurng ots arnd Drives 0 15 WfW

B i ing Grournds W al 1Yays lless Hlan 11] e 10 Wltirneru- 00

W a Nays 10 middot de or greater 112 W

Plaza a reas

Spec rest re areas

Stainh1ays 1ow 2

B i ing 8ntrames and Exits Ma efilbies m wr near foot of door width

Other doors 2o w 1r ear foot of door width

Ctmqpies and Overhimgs Free starndillg and a ched tmd 12s w m2 m bullerhangs

0 door sales Op en areas (ind udi Ilg ve id e sales 05 W lo )

street frontage far vehicle sales lots 21] W linear toot in addi middot on to open are-0bullmiddot lo~nce

B i ing facades 0 2 W tfl2 middot or eacil illumirnated N311 or surface

o r 5 0 Wllinear root fo r eac h m n inated N3l1 o r

surface length

Automated te lle r rnachmiddot es a lld 210 W per loca tion plus 91] night deposito liies W 1pernddiliorml A I middot per

1oca middot om

Eirltrances and gatehouse inspecliion 125 W ffl2 o middot uncovered slatiaBS a goo~ ed acir ies area

Load ing are-0s or law enforcement 0 5 W 2 of u rnco1bullered area fire ambu rnce and otiher emergency service ibullehmiddotctes

Drive-through w indOWs a taslrood 400 W per drive-Hlrough restaurants

Parking near 24 -h our retail 80111 W per main entry entmn ces

HVAC Equipment Air-Source Air Conditioners and Air-Source Heat Pumps New unitary air conditioning units or air source heat pumps that meet or exceed the qualifying cooling efficiency shown in the HVAC Incentives Worksheet are eligible for an incentive They can be either split systems or single package units The efficiency of split systems is based on an ARI reference number All packaged and split system cooling equipment must meet Air Conditioning and Refrigeration Institute (ARI) standards (210240 320 or 340360) be UL listed use a minimum ozone-depleting refrigerant (eg HCFC or HFC) All required efficiencies are based on the Consortium for Energy Efficiency (CEE) high-efficiency commercial air conditioning and heat pump specifications (wwwcee1org) A manufacturerrsquos specification sheet indicating the system efficiency must accompany the application Disposal of the existing unit

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 24

must comply with local codes and ordinances

Package Terminal Systems (Replacements) Package terminal air conditioners and packaged terminal heat pumps are through-the-wall self-contained units that are 2 tons (24000 Btuh) or less All EER values must be rated at 95degF outdoor dry-bulb temperature

Ductless Mini-Split Heat Pump lt54 Tons Incentives are offered for Ductless Mini-Split Heat Pump lt54 Tons with SEER rating greater than or equal to 120 and EER greater than or equal to 145 and HSPF greater than or equal to 90

Geothermal Heat Pump Geothermal equipment is a high-efficiency groundwater source water source or ground source heat pump system that meets or exceeds the energy efficiency requirements shown in the tables below These measures do not apply to heat pump systems coupled with non-heat pump systems such as chillers rooftop AC units boilers or cooling towers which must be filed as custom measures All HVAC applications other than comfort cooling and heating such as process cooling must also be applied for as custom measures

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 25

HVAC Heating Qualifying Incentive

Equipment Type and Cooling Capacity Cooling Qualifying Efficiency ($ per cooling Measure Code Efficiency

ton)

Air Cooled Air Conditioner

H01 lt 54 tons (lt 65000 Btuhr) 15 SEER NA $22

H02 lt 54 and lt 11 25 tons

125 IEER $22 (lt 65 000 Btuh and lt 135 000 Btuhr) NA

H03 lt11 25 and lt 20 tons

123 IEER NA $22 (lt 135000 Btuh and lt 240000 Btuhr)

H04 lt 20 and lt 6333 tons (~

11 1 IEER NA $22 240000 Btuh and lt 760000 Btuhr)

HOS ~ 6333 Ions (~ 760000 Btuhr) 103 IEER NA $22

Air Cooled Heat Pumps

H06 lt 54 tons (lt 65000 Btuhr) 143 SEER 87 HSPF $30

H07 lt 54 and lt 11 25 tons

123 IEER 3 3 COP $30 (lt 65000 Btuh and lt 135000 Btuhr)

HOS lt11 25 and lt 20 tons

1U IEER 3 2 COP $30 (lt 135000 Btuh and lt 240000 Btuhr)

H09 lt 2000 tons (240000 Btuhr) 105 IEER 3 2 COP $30

Packaged Terminal Systems (PTAC and PTHP) (PTHP only)

H10 lt 8000 Btuhr (lt066 tons) 11 8 EER 33 $17

H11 ~8000 and lt10500 Btuhr (~066 and lt 0875 tons) 11 4 EER 32 $17

H12 gt10500 Btuhr ( 875 tons) 107 EER 31 $17

H22 lt 54 tons (lt 65000 Btuhr) 121 EER 12 3 IEER NA $22

lt 54 and lt 11 25 tons 121 EER 12 3 IEER $22 H23

(lt 65000 Btuh and lt 135000 Btuhr) NA

H24 lt11 25 and lt 20 tons

120 EER 12 2 IEER $22 (lt 135000 Btuh and lt 240000 Btuhr) NA

H25 lt20 and lt 633 tons

119 EER 12 2 IEER $22 (lt 240000 Btuh and lt 760000 Btuhr) NA

H26 ~ 633 tons( lt760000 Btuhr) 110 EER 11 1 IEER NA

$22

HVAC Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 26

Other HVAC EquipmentHotel Guest Room Occupancy Sensor Incentives are offered for occupancy-based controls that control electric air conditioning air source heat pumps and or electric heating units for individual hotel rooms Systems with nonshyelectric heat are not eligible Sensors must be controlled by automatic occupancy detectors or a key-card system and the default setting for controlled units differ by at least 5 degrees (or shut the unit fan and heating or cooling off completely) from the operating set point during unshyoccupied periods The control system may also be tied into other electric loads such as lighting and plug loads to shut them off when occupancy is not sensed The incentive is per room Replacement or upgrades of existing occupancy-based controls are not eligible as a prescriptive incentive

Economizer Integrated Dual Enthalpy Economizer ControlsThis measure is targeted to non-residential establishments whose HVAC equipment is not equipped with a functional economizer

Circulation Fan High-Volume Low-SpeedFans must be greater than 16 feet in diameter and have variable speed control

ECM Circulation Fan This measure is targeted to non-residential customers whose air handling equipment currently uses a SP or PSC fan motor rather than an ECM This measure applies only to circulating fan motors of 1 HP or less Above 1 HP motors are governed by NEMA standards and would see little to no efficiency benefit by adding an ECM The targeted fan can supply heating or cooling only or both heating and cooling

ECM Circulation Pump This measure is targeted for replacement of a shaded pole or permanent split capacitor pump or motor with an electronically commutated pump or motor le75 HP

Retrocomissioning Cooling Systems Confined to chiller plant andor isolated packaged units For reservation must contain proposal with defined scope at equipment level that demonstrates energy savings For final approval required final commissioning report including raw data (TAB reports) demonstrating actual scope

This prescriptive measure can be used for facilities with maximum cooling demand less than 1687 tons Larger systems require the use of custom HVAC measure

Retrocomissioning Whole Building Covers all relevant major mechanical systems such as chiller plant air side systems compressed air andor process systems For reservation must contain proposal with defined scope at equipment level that demonstrates energy savings For final approval required final commissioning report including raw data (TAB reports) demonstrating actual scope

This prescriptive measure can be used for facilities less than 404858 square feet Larger facilities require the use of custom HVAC measure

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 27

Energy Management System For installing a web-based building automation system in existing buildings that currently have no digital automated HVAC controls or have outdated pneumatic control systems with inoperable time control functions Existing HVAC control systems must not have time-of-day scheduling Upgrading obsolete EMS HVAC system with inoperable time clock functions will be reviewed on a case-by-case basis for incentive eligibility This incentive cannot be combined with incentives for programmable thermostats or setback-setup controls Must include the controls strategy and a scaled floor-plan with controlled areas highlighted HVAC BAS systems must be new and include bull Central time clock control bull Web-based interface with PC-based controls and graphic bull Building performance Tracking bull Open-protocol architecture controls system shall consist of either LonTalk (ANSICEA 7091) or BACNet (ASHRAE ANSI 135) protocol being used between all controlled and controlling devices and every node on the network bull Minimum setback period must exceed 2200 hours per year bull A minimum setback space temperature of at least 10degF when heating and 5degF when cooling bull Ability to adjust schedules and settings remotely over the internet bull Report generation describing energy and operating trends

This prescriptive measure can be used for facilities with maximum cooling demand less than 456 tons Larger systems require the use of custom HVAC measure

Demand Controlled Ventilation New ventilation controls must use carbon dioxide levels to measure occupancy and modify the percentage of outside air based on occupancy levels Only buildings with space heating and cooling requirements are eligible Conditioned spaces must be kept between 65ordmF and 75ordmF during occupied operating hours Carbon dioxide sensors must be installed in conjunction with fully functioning motor operated outside air dampers Dual temperature air-side economizers with zone-level CO2 sensors for rooftop units are eligible

This prescriptive measure can be used for facilities with maximum cooling demand less than 2210 tons Larger systems require the use of custom HVAC measure

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 28

Other HVAC Measures- consult project manual for eligibility specifications HVAC

Measure Incentive Unit Quantity Incentive

Measure Code er Unit

H1 8 Hotel Guest Room Occupancy Sensor Room $20

H1 9 Economizer Integrated Dual Enthalpy Economizer Controls Ton $1 5

H20 Circulation Fan High-Volume Low-Speed Unit $30

H21 ECM Circulation Fan Fan $1 5

H27 ECM Circulation Pump Pump $50

H28 Retrocommissioning Cooling Systems

Ton $750

H29 Retrocommissioning Whole Buidling

Square Foot $010

H29 Energy Management System Ton $2500

H30 Demand Controlled Ventilation Ton $2500

Other HVAC Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 29

Unitary HVAC Chillers

Air-Cooled Chillers Water Cooled Positive Displacement Reciprocating Chillers and Water Cooled Centrifugal Chillers Chiller applications including existing multiple chiller configurations (including redundant or lsquostand-byrsquo chillers) existing chillers serving multiple load groups and chillers in industrial applications are defined as non-standard applications and must follow a site-specific custom protocol $005kWh) rate

Incentives are offered for chillers with an IPLV value (expressed in kW per ton) that is less than or equal to the qualifying efficiency shown in the table below The chiller efficiency rating must be based on ARI Standard 550590-2003 for IPLV conditions The chillers must meet ARI standards 550590-2003 be UL listed and use a minimum ozone-depleting refrigerant (eg HCFC or HFC) The ARI net capacity value should be used to determine the chiller tons A manufacturerrsquos specification sheet with the rated kWton-IPLV or COP-IPLV must accompany the application along with the four point performance data that is the basis for the IPLV The application must include a certification that the chiller is appropriately sized for site design load conditions

Chillers must satisfy efficiency requirements for both full load and IPLV efficiencies for either Path A or Path B The table shows the minimum efficiency ratings to qualify for the prescriptive incentive which must be consistent with the expected operating conditions of the efficient chiller For example if the efficient chiller satisfies Path A and generally performs at part load the appropriate baseline chiller efficiency is the IPLV value under Path A If the efficient chiller satisfies Path B and generally performs at full load the appropriate baseline chiller efficiency is the full load value under Path B Generally chillers operating above 70 percent load for a majority (50 or more) of operating hours should use Path A and chillers below 70 load for the majority of operating hours should use Path B

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 30

C3 lt 75 tons

C4 75 tons and lt 150 tons

cs ~ 150 tons and lt 300 tons C6 ~ 300 tons

Water Cooled Centrifugal Chillers C7 lt 300 tons CB ~ 300 tons and lt 600 tons

C9 ~ 600 tons

Path A

Qualifying Full Load Efficiency

Qualifying IPLV Efficiency

Path B

Qualifying Full Load Efficiency

Qualifying IPLV Efficiency

0780 kWton 0567 kWton 0800 kWton 0540 kWton

0775 kWton 0554 kWton 0790 kWton 0527 kWton

0680 kWton 0522 kWton 0718 kWton 0486 kWton 0620 kWton 0486 kWton 0639 kWton 0441 kWton

0634 kWton 0536 kWton 0639 kWton 0405 kWton 0576 kWton 0494 kWton 0600 kWton 0360 kWton

0570 kWton 0494 kWton 0590 kWton 0360 kWton

I

Incentive ($ton)

$17

$17

Unitary Chiller Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 31

Refrigeration

Anti-Sweat Heater Controls Incentives are offered for devices that sense the relative humidity in the air outside of the display case and cycles or turns off the glass door (if applicable) and frame anti-sweat heaters when the ambient dew point is below a preset set point Technologies that can turn off anti-sweat heaters based on sensing condensation (on the inner glass pane) also qualify Incentive is based on the number of doors

Evaporator Fan Controls This measure is for the installation of controls in medium temperature walk-in coolers The controller reduces airflow of the evaporator fans when there is no refrigerant flow The measure must control a minimum of 120 HP where fans operate continuously at full speed The measure also must reduce fan motor power by at least 75 during the off cycle This measure is not applicable if any of the following conditions apply 1) Compressor runs all the time with high duty cycle 2) Evaporator fan does not run at full speed all the time 3) Evaporator fan motor runs on poly-phase power 4) Evaporator fan motor is not shaded-pole or permanent split capacitor (PSC) 5) Evaporator fan does not use off-cycle or time-off defrost

Floating Head Pressure Controls Controls must vary head pressure to adjust condensing temperatures in relation to outdoor air temperature Must replace existing constant pressure or manually controlled systems to achieve reduced head pressure in order to maintain a minimum saturated condensing temperature of 70 degF or a 20 degF variance below design heat pressure during mild weather conditions Compressor size must be at least 5 HP

Automatic Door Closers for Walk-In Coolers and Freezers The auto-closer should be applied to the main insulated opaque door(s) of a walk-in cooler or freezer The auto-closer must be able to firmly close that door when it is within one inch of full closure This must be a newly installed automatic door closer replacements on previously installed door closers are not eligible for an incentive

EC Motor for Walk-inReach-in Refrigerated cases or Freezer cases Incentives are offered for replacement of an existing standard-efficiency shaded-pole or permanent split capacitor evaporator fan motor in refrigerated display cases or fan coil in walk-ins The replacement unit must be an Electronically Commutated Motor (ECM) This measure cannot be used in conjunction with the Evaporator Fan Controller measure

ENERGY STAR Solid Door Freezer and Glass Door Freezer and Refrigerators Incentives are offered for replacement of existing self-contained refrigerators and freezers with units that are ENERGY STARreg listed Only units with built-in refrigeration systems are qualified Units with remote refrigeration systems or units do not qualify Customers must provide proof that the appliance meets the CEE or ENERGY STAR efficiency specifications using ASHRAE Standard 72-2005 (38degF plusmn 2degF) Incentive is per unit

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 32

Refrigeration Suction Pipe Insulation 1 Must insulate bare refrigeration suction lines of 1 58 inches in diameter or less on existing equipment only 2 Cooler lines require frac34 inch of flexible closed-cell nitrite rubber or an equivalent insulation 3 Freezer lines require 1-inch of flexible closed-cell nitrite rubber or an equivalent insulation 4 Insulation exposed to the outdoors must be protected from the weather (ie jacketed with a medium-gauge aluminum jacket)

Night Cover 1 Must install a cover on an existing open refrigerated display case to decrease its cooling load during off hours 2 The equipment manufacturer must not object to the use of night covers for the existing display case model 3 This rebate is based on the linear footage of the installed 4 The cover must be applied for a period of at least six hours

Strip Curtain on Walk-In CoolerFreezer 1 New strip curtains or plastic swinging doors must be installed on doorways of refrigerated spaces (conditioned to less than 50deg F) 2 Rebate is based on the linear footage of the doorway that the strip curtains are being installed in 3 Opening between the strip curtain and bottom of doorway must be no larger than 1 inch 4 Strips must have an overlay greater than 1 inch

Evaporator Coil Defrost Control 1The current system must include an operating electric defrost system with a functional electroshymechanical time clock 2 Evaporator coil temperature and pressure must be monitored by controller in order to determine optimal defrost cycles 3 New intelligent control systems to control the defrost systems will typically replace timed- defrost controls

Variable Speed Refrigeration Compressor This measure VSD control for refrigeration systems and its eligibility targets applies to retrofit construction in the commercial and industrial building sectors it is most applicable to grocery stores or food processing applications with refrigeration systems This protocol is for a VSD control system replacing a slide valve control system

Add Doors to Open Refrigerated Cases The eligible retrofit equipment is either no sweat doors or doors with anti-sweat heaters If a lighting retrofit is included with the new doors it must consume the same amount of energy or less energy than the old lighting Upgrades to lighting or other system components should be processed separately Horizontal cases are not eligible and should be processed as custom

Door Gaskets PECO Smart Ideas For Your Business CampI Program Application Manual

Q1 2017 pg 33

This measure is applicable to commercial refrigeration and applies to the replacement of worn-out gaskets with new better-fitting gaskets Applicable gaskets include those located on the doors of walk-in andor reach-in coolers and freezers This protocol applies to the main doors of both low temperature (ldquofreezerrdquo ndash below 32 degF) and medium temperature (ldquocoolerrdquo ndash above 32 degF) walk-ins

Zero Energy Doors For this measure a no-heatlow-heat clear glass door must be installed on an upright display case It is limited to door heights of 57 inches or more Doors must have either heat reflective treated glass be gas filled or both This measure applies to low temperature cases onlymdashthose with a case temperature below 0degF Doors must have 3 or more panes Total door rail glass and frame heater amperage ( 120 volt) cannot exceed 039413 amps per door for low temperature display cases Rebate is based on the door width (not including case frame)

Air Cooled Refrigeration Condenser Approach temperature lt8F for low temperature loads lt13F for medium temperature loads

Oversized Condenser with VFD New standalone condenser must no more than 150 larger than load

Case Light Occupancy Controls Acceptable for freezer or refrigerated cases as well as open cases or cases with doors

LED Open Case Lighting For replacing open case T8 or T12 fluorescent fixtures with DLC listed LEDs on refrigerators coolers and freezers

LED Enclosed Case Lighting Refrigerated LED case lighting with or without motion sensors on enclosed refrigerated vertical displays The baseline equipment is assumed to be cases with uncontrolled T8 or T12 linear fluorescent lamps

LED Enclosed Case Lighting Freezer LED case lighting with or without motion sensors on enclosed freezer vertical displays The baseline equipment is assumed to be cases with uncontrolled T8 or T12 linear fluorescent lamps

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 34

Refrigeration Measures Ref Measure

Measure Incentive Unit IncentiveUnit Code R01 Anti-Sweat Heater Controls Door $30

R02 Evaporator Fan Controls Controller $50

R03 Floating-head Pressure Controls HP $20

R04 Automatic Door Closers fo r Walk-in Coolers Door $75

R05 Automatic Door Closers fo r Walk-in Freezers Door $75

R06 Evaporator Fan EC Motor fo r Reach- in Cases Motor $35

RO Evaporator Fan EC Motor fo r Walk-in Cases Motor $50

R08 ENERGY STARreg Glass Door Freezer lt15 Cu Ft Unit $100

R09 ENERGY STARreg Glass Door Freezer 15- 49 Cu Ft Unit $125

R10 ENERGY STARreg Glass Door Freezer ~ 50 Cu Ft Unit $145

R11 ENERGY STARreg Solid Door Freezer Unit $75

R12 ENERGY STARreg Glass Door Refrigerator lt50 Cu Ft Unit $30

R13 ENERGY STARreg Glass Door Refrigerator gt= 50 Cu Ft Unit $50

K14 t NtKGY ~ I AKreg ~Olld Uoor Ketngerator $ OU Cu t-t Unit $~0

R15 Suction Pipe Insulation Walk-in Coolers Linear Foot $050

R16 Suction Pipe Insulation Walk in Freezers Linear Foot $075

R17 Night Cover Linear Foot $800

R18 Strip Curtains on Walk-in Cooler Linear Foot $250

R19 Evaporator Coil Defrost Control Controller $7500

R20 Variable Speed Refrigeration Compressor Compressor $85

R21 Add Doors to Open Refrigerated Cases Door $55

R22 Door Gaskets Door $250

R23 Zero Energy Doors Door $50

R24 A ir Cooled Refrigeration Condenser Ton $10

R25 Oversized Condenser with VFD Ton $10

R26 Case Light Occupancy Controls Door $8

R27 LED Open Cose Lighting Cose $10

R28 LED Enclosed Case Lighting Refrigerated Door $30

R30 LED Enclosed Case Lighting Freezer Door $30

Refrigeration Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 35

Food Service Beverage and Snack Machine Controls Incentives are offered for refrigerated vending machines that contain non-perishable bottled and canned beverages Controller for both types of systems must include a passive infrared occupancy sensor to turn off fluorescent lights and other energized machine systems when the surrounding area is unoccupied for 15 minutes or longer For the refrigerated machines the control logic may include periodic power up at 2-hour intervals or longer to maintain product temperature and provide compressor protection

ENERGY STARreg Refrigerated Beverage Vending Machines Incentives are offered for ENERGY STARreg beverage vending machines Qualifying machines can be found at httpswwwenergystargovproductsothervending_machines

ENERGY STARreg Electric Steam Cooker This measure applies to the installation of electric ENERGY STAR steam cookers as either a new item or replacement for an existing unit Gas steam cookers are not eligible The steam cookers must meet minimum ENERGY STAR efficiency requirements A qualifying steam cooker must meet a minimum cooking efficiency of 50 percent and meet idle energy rates specified by pan capacity

ENERGY STARreg Electric Combination Oven This measure applies to electric ovens capable of handling single 12 x 20 x 25 pan per rack

ENERGY STARreg Commercial Convection Oven The oven must meet or exceed heavy load potato cooking energy efficiency of greater than 70 utilizing ASTM Standard F149 Applies only to electric ovens

ENERGY STARreg Commercial Fryers The commercial fryer must have a tested heavy load (French fry for large vats) cooking energy efficiency of greater than 80 utilizing American Society for Testing and Materials (ASTM) Standard F1361 for commercial fryers and ASTM Standard F2144 for large vat fryers Multiple vat configurations are paid per qualifying vat ENERGY STAR maintains a list of qualifying products and specifications at httpwwwenergystargov

ENERGY STARreg Commercial Hot Holding Cabinet Energy STAR rating electric

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 36

Food Service amp Other Measures FoodOther

Measure Incentive Unit Incentive

Measure Code Unit

F01 Beverage Machine Controls Unit $25

F02 Snack Machine Controls Unit $20

F03 ENERGY STARreg Refrigerated Beverage Vending Machir Unit $125

F04 ENERGY STARreg Commerc ial Steam Cooker Unit $200

F05 ENERGY STARreg Electric Combination Oven Unit $200

F06 ENERGY STARreg Commercial Electric Convection Oven Unit $150

F07 ENERGY STARreg Commerc ial Fryers Unit $100

F08 ENERGY STARregCommerc ial Hot Holding Cabinet Unit $200

Food Service Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 37

Motors and Variable Frequency DrivesEarly Replacement Motors For constant speed and uniformly loaded motors this measure applies to the replacement of old motors with new energy efficient motors of the same rated horsepower Old motors must be less than 15 years Replacements where the old motor and new motor have different horsepower ratings are considered custom measures Motors with variable speeds variable loading or industrial-specific applications are also considered custom measures

Motors Incentive Table Motors

Measure Code

HP Incentive per Motor

M01 15 - 10 $40 M02 11 - 50 $100 M03 51-100 $150 M04 gt100 $300

Only VFDs on unitary systems are eligible Non-unitary systems must be submitted as a custom measure Soft start motors are not eligible

Variable Frequency Drives on HVAC Fan Applications Incentives are offered for installing VFDs on existing HVAC fans that do not have pre-existing VFDs This measure applies to HVAC supply and return fans only All other fans including cooling tower fans must be submitted as custom measures Manually fixed speed settings on HVAC fans must be submitted via custom application The VFD must control motor speed automatically in response to pressure flow temperature or other variable signal The installation of a VSD must accompany the permanent removal or disabling of any throttling devices such as inlet vanes bypass dampers and throttling valves etc The incentive is offered per controlled HP

Variable Frequency Drives on Pump Applications Incentives are offered for installing VFDs on existing chilled water pumps and heating hot water pumps that do not have existing VFDs This measure applies to chilled water pumps and heating hot water pumps only All other pumps must be submitted as custom measures Manually fixed speed settings on pumps must be submitted via custom application The VFD must control motor speed automatically in response to pressure flow temperature or other variable signal The installation of a VSD must accompany the permanent removal or disabling of any throttling devices such as throttling valves The incentive is offered per controlled HP

Variable Speed Control for Kitchen Exhaust Hoods The measure consists of installing a new VSD in conjunction with a sensor control system that varies the exhaust rate of kitchen ventilation (exhaust andor makeup air fans) based on the heat and effluent output from the cooking appliances (ie the more heat and smokevapors generated the more ventilation needed) This involves installing a temperature sensor in the hood exhaust collar andor an optic sensor on the end of the hood that senses cooking conditions and allows the system to automatically vary the rate of exhaust to match requirements by adjusting the fan speed accordingly

Variable Speed Drives for Process or Other Equipment VFD must be used in conjunction with a process (non HVAC) application To qualify for this incentive the driven equipment must operate at least 2000 hours per year Redundant or back- up units do not qualify VFDs replacing existing VFDs do not qualify The VFD must control motor

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 38

speed automatically in response to pressure flow temperature or other variable signal VFDs installed as ldquosoft startrdquo without automatic manual closed loop speed control do not qualify The installation of a VFD must accompany the permanent removal or disabling of any throttling devices such as throttling valves The incentive is per controlled HP and only applies to controlled motors less than 50 HP

VSDVFD Incentives Table VFD

Measure Code

Measure Unit Incentive per Unit

Fan Application

V01 VFD on HVAC Fan HP $25 Pump Application

Variable Speed Control for Kitchen Exhaust Hoods

Variable Speed Drives for Process or Other Equipment

V02 VFD on Chilled Water Pumps HP $25 V03 VFD on Heating Hot Water Pumps HP $25

V04 Kitchen Exhaust Fan Retrofit Hood HP $500

V05 Process Motor lt 50 HP HP $50

Domestic Hot Water Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater This measure documents the energy savings attributed to converting from a standard electric water heater to an ENERGY STAR natural gaspropane-fired water heater or a standard oil-fired water heater with an Energy Factor of 0585

Heat Pump Water Heater This includes heat pump water heaters with energy factors meeting ENERGY STAR criteria The measure described here involves a direct retrofit of a resistive electric water heater with a heat pump water heater It does not cover systems where the heat pump is a pre-heater or is combined with other water heating sources More complicated installations can be treated as custom projects

Low Flow Pre-Rinse Spray Valve This measure applies to efficient low flow pre-rinse sprayers in grocery and food service applications The most likely areas of application are kitchens in restaurants and hotels Only premises with electric water heating may qualify for this incentive In addition the replacement pre-rinse spray nozzle must use less than 16 gallons per minute with a cleanability performance of 26 seconds per plate or less Low flow pre-rinse sprayers reduce hot water usage and save energy associated with water heating

Domestic Hot Water Incentive Table

Measure Code Measure Unit Retrofit Incentive per

Unit

W01 Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater Unit $100

W02 Heat Pump Water Heater Unit $100 W03 Low-Flow Pre-Rinse Spray Valve Valve $17

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 39

Compressed Air SystemsNo-loss Condensate Drain No-loss Condensate Drains are controlled by a sensor that monitors the level of condensate and only open when there is a need to drain condensate They close before compressed air is allowed to escape This measure is targeted to non-residential customers whose equipment is a timed drain that operates on a pre-set schedule Acceptable baseline conditions are compressed air systems with standard condensate drains operated by a solenoid and timer

Air-Entraining air nozzle This measure is targeted to non-residential customers whose compressed air equipment uses stationary air nozzles in a production application with an open copper tube of 18rdquo or 14rdquo orifice diameter Energy efficient conditions require replacement of an inefficient non-air entraining air nozzle with an energy efficient air-entraining air nozzle that use less than 15 CFM at 100 psi for industrial applications

Storage Tanks for LoadNo Load Screw Compressors This measure protocol applies to the installation of air receivers with pressureflow controls to loadno load compressors Loadno load compressors unload when there is low demand The process of unloading is done over a period of time to avoid foaming of the lubrication oil Using a storage tank with pressureflow control will buffer the air demands on the compressor Reducing the number of cycles in turn reduces the number of transition times from load to no load and saves energy The baseline equipment is a loadno load compressor with a 1 galcfm storage ratio or a modulating compressor with blowdown The high efficiency equipment is a loadno load compressor with a minimum storage ratio of 4 gallons of storage per cfm

Cycling Refrigerated Thermal Mass Dryer When air is compressed water vapor in the air condenses and collects in liquid form Some of this condensate collects in the air distribution system and can contaminate downstream components such as air tools with rust oil and pipe debris Refrigerated air dryers remove the water vapor by cooling the air to its dew point and separating the condensate Changes in production and seasonal variations in ambient air temperature lead to partial loading conditions on the dryer Standard air dryers use a hot gas bypass system that is inefficient at partial loads A Cycling Thermal Mass Dryer uses a thermal storage medium to store cooling capacity when the system is operated at partial loads allowing the dryer refrigerant compressor to cycle

This measure is targeted to non-residential customers whose equipment is a non-cycling refrigerated air dryer with a capacity of 600 cfm or below Acceptable baseline conditions are a non-cycling (eg continuous) air dryer with a capacity of 600 cfm or below The replacement of desiccant deliquescent heat-of-compression membrane or other types of dryers does not qualify under this measure

Variable Speed Air Compressor This type of compressor uses a special drive to control the speed (RPM) of the unit which in turn saves energy compared to a fixed speed equivalent

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 40

No-loss Condensate Drain Air-Entraining Air Nozzle Cycling Refrigerated Thermal Mass Dryer

Compressor Incentive per

Equipment Type Units Quantity Daily Operating Unit

Hours

CA04 Storage Tanks for LoadNo Load Screw

Compressor HP $10 Compressors

CA05 Variable Speed Air Compressor

Compressor HP $30

CA06 Compressed Air System Optimization

Compressor HP $50

Compressed Air System Optimization The submitted optimization measures must be identified in an Air System Audit or equivalent study to be eligible The measures must demonstrate energy savings as evaluated by a Program Engineer Additionally measures must also fall under one or more of the category below to be eligible

1) Install storage Receivers (new receivers only replacing existing storage receivers are ineligible)

2) Compressor control (must demonstrate improvement in partial load efficiency of the compress air system including reduceeliminate partially loaded units)

3) Dryer control 4) Source pressure reduction 5) Right-sizing distribution components such as piping filters regulators

connectors and hoses (routine maintenance replacements are ineligible) 6) Leakage detection and repair 7) Eliminate low-efficiency end-usages of compressed air 8) Heat recovery (most reduce electricity consumption of the replaced heat source)

Compressed Air Systems Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 41

lt65000 Btuh

~ 65000 Btuh and lt135000 Btuh

135000 Btuhand lt240000 Btuh

240000 Btuh and lt760000 Btuh

760000 Btuh

154

142

135

125

123

Chiller Capacity Path APath B efficiency (kWton )

lt 150 tons

~150 tons and lt300 tons

300 tons and lt400 tons

400 tons and lt600 tons

600 tons

lt75 tons

~75 tons and lt150 tons

~150 tons and lt300 tons

~300 tons and lt600 tons

600 tons

0610 FU0695 FL and 0550 IPLV0440 IPLV

0610 FU0635 FL and 0550 IPLV0400 IPLV

0560 FU0595 FL and 0520 IPLV0390 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

Path APath B efficiency (kWton )

0750 FU0780 FL and 0600 IPLV0500 IPLV

0720 FU0750 FL and 0560 IPLV0490 IPLV

0660 FU0680 FL and 0540 IPLV0440 IPLV

0610 FU0625 FL and 0520 IPLV0410 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

Data Centers Data Center incentives are available for facilities ranging in size from office server closets to large standalone facilities

Air Cooled Chiller Path APath B EER (BtuWh) lt150 tons 101 FL97 FL and 137 IPLV158 IPLV ge150 tons 101 FL97 FL and 140 IPLV161 IPLV

Air Cooled Chiller without Condenser Air-cooled chillers without condenser must be rated with matching condensers and comply with air-cooled chiller efficiency requirements

Computer Room Air Conditioner

Computer Room Air Handler Variable Speed Replacing constant speed CRAH with VSD CRAH

Water Cooled Centrifugal Chiller

Water Cooled Positive Displacement or Reciprocating Chiller

Uninterruptible Power Supply Must be Energy Star Certified UPS or have full load efficiency rating

ge948 for 20-100 kVA ge978for ge100 kVA

Mainframe Refresh The rated efficiency of the replacement Mainframes power supply must be at least 8 more

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 42

- Equipment Type Units IncentiveUnit

D1 Air Cooled Chiller Ton $4000 D2 Air Cooled Chiller W ithout Condenser Ton $2000 D3 Computer Room Air Conditioner Ton $3000 D4 Computer Room Air Handler Variable Speed Ton $1000 D5 Water Cooled Centrifugal Chiller Ton $3000 D6 Water Cooled Positive Displacement or Reciprocatin $3000 D7 Uninterruptible Power Supply 20-100 kVA $1000 D8 Uninterruptible Power Supply gt 100 kVA $1000 D9 Mainframe Refresh $2000

D10 Server Refresh $2000 D11 PC Power Managment System $600 D12 HVAC System Optimization $005 D1 3 HoUCold Aisle Containment kWh saved $005 D14 Server Virtualization kW reduction $40000 D1 5 Thin Clients Units $500

efficient compared to the existing Mainframes power supply The replacement Mainframe if Inactive must be decommissioned and removed from the Data Center

Server Refresh Replacement servers must be ENERGY STARreg certified Replacement servers power supply must be 5 more efficiency compared to the power supply of the replaced servers The replaced server must be decommissioned and removed from the data center

HVAC System Optimization Final system must have these features

-Implementation of free cooling by the addition of an economizer system -Conversion of constant speed CRACCRAH into variable speed operations using VFDs and additional control functionalities and -Elevation of exhaust air temperature

HotCold Aisle Containment Includes both Hot and Cold Aisles Installing new containment measures not replacing already existed aisle containment Plenum-only installations not eligible Must result in higher difference between the return air (hot aisle) and supply air (cold aisle) temperatures measured at rack intake and exhaust locations

Server Virtualization Minimum of consolidating 5 Servers virtualized into one Server The virtualized servers if inactive are removed from the Data Center

Thin Clients Must be ENERGY STAR certified thin clients Decommissioned clients are removed from the Data Center

Data Center Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 43

Whole Building Systems Whole Building Systems Approach

The Whole Building Systems approach is intended to encourage integrated energy efficient designs by providing enhanced incentives to the customer who addresses overall energy performance Owners of eligible and qualifying new construction and major renovation projects can receive Whole Building Systems incentives when energy modeling indicates the projectrsquos performance is over 10 better than the ASHRAE 901-2007 Savings from eligible electric end-uses in kilowatt hours define the amount of financial incentive Energy savings achieved through renewable energy sources are not counted toward project energy savings and are not included in the savings basis Incentive reservations obtained during the design phase of a project will be honored for up to 24 months

How to Apply for Whole Building Systems Incentives Before construction begins bull A Pre-notification Application must be submitted documenting the Owners intention to

seek Whole Building Systems incentives bull The Owner must confirm the goals and energy efficiency strategies being pursued by the

design team on the completed Pre-notification Worksheet (Checklist tab) and in the project Summary (Whole Building Performance Summary tab)

bull Submit executable building modeling software files bull Submit the Whole Building Performance Summary worksheet energy simulation model

inputs and outputs and supporting documentation bull Receive confirmation and eligibility notification from the PECO Smart Ideas team and

receive an incentive reservation bull The final incentive paid may differ from the reserved incentive amount The final

incentive will be calculated based on site-verified equipment installation and performance The Owners final application and complete documentation must be received within 6 months of equipment installation or certificate of occupancy whichever is later

bull An executable energy model and model output demonstrating compliance with the criteria of ASHRAE 901-2007 Appendix G will be required and the equipment data sheets LED lighting fixtures must be on the DLC or Energy STAR qualified products list (QPL) to be eligible LED fixtures not on the DLC or Energy STAR QPL has the option of submitting LM79 and LM80 test reports for evaluation against DLC and Energy STAR eligibility criteria

During the construction period bull Owner and design team continue to work closely with their chosen contractor to assure

energy efficiency measures are included and installed in the completed building

When the building is constructed and operational bull Complete the Owner final application Request an equipment verification site visit by the

PECO Smart Ideas team Equipment must be installed and fully operational o Program staff will schedule a site visit and utilize submitted documentation and

measurement tools to verify that the installation follows the submitted energy simulation model

bull When PECO confirms that there are no significant changes to the installed equipment payment of the reserved incentive will be made to the Owner within 6 weeks

bull If changes from the proposed design energy simulation are found the Owner and design team will be notified of the reduced incentive amount a period of 20 calendar days will

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 44

Improvement Incentive per Sq Ft

over Code

~11 to lt20 $0155

~20 to lt30 $0233

~30 to lt40 $0350

~40 to lt60 $0525

~60 $0700

be allowed for supplemental information to be provided if no additional information is received by PECO Smart Ideas team the reduced incentive payments will be made and sent to the Owner if additional clarification and information is available program staff will work diligently to resolve the discrepancies and arrive at a reasonable incentive adjustment with the customer

Payments made by PECO Smart Ideas are final

Customer Eligibility The Owner of the proposed new building project must be a customer of PECO and receive delivery of electric service from PECO to receive kilowatt-hour based incentives Please note that electricity supply can be provided by any vendor

Project Eligibility bull The project must be a new construction or major renovation Major renovations involving

the removal and redesign of at least two building systems (such as interior lighting and mechanical systems) may apply for Whole Building Systems incentives

bull To qualify for incentives projects must demonstrate energy efficiency enhancements that achieve at least 11 improvement in the proposed design versus the standard baseline

bull The Owner must submit a Pre-approval Application to the program at the stage where changes for increased energy efficiency are still feasible and construction has not been completed

bull Projects receiving Whole Building Systems incentives are not eligible to receive other incentives such as the prescriptive or custom program incentives for the same scope

bull Project components that are NOT eligible for consideration as a basis for PECO Smart Ideas include the following o Alternative fuel sources (eg use of gas or oil equipment in lieu of electric) Please note

that combined heat and power (CHP) systems will be incentivized for the electricity they produce

o Renewable energy sources (eg solar wind biomass) bull Ineligible savings include exterior lighting process receptacle miscellaneous loads and

other unregulated end-uses Custom incentives are available for new construction exterior lighting

Whole Building Systems Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 45

Custom Project Specifications Instructions for Energy Savings Calculations for Custom Projects Custom projects must involve measures that result in a reduction in electric energy use (kWh) Electricity savings may result from either efficiency improvements or fuel switching Custom Incentives are based on the first year kilowatt-hour savings Custom applications must be accompanied by detailed engineering calculations that document the annual total energy savings

The following serve as guidelines for the minimum required documentation

Equipment Information Submittals bull A list of the present and proposed equipment and components to be installed

including manufacturerrsquos catalogmodel number bull Manufacturerrsquos specification sheets showing capacities and performance for all major

components

Energy Savings Calculations Provide calculations documenting the predicted energy consumption of the existing (or baseline) and proposed system using appropriate analytical tools and clearly stated assumptions Calculations may be performed by ldquohandrdquo but spreadsheet analysis or more rigorous modeling is preferred All analysis should be provided in electronic format All assumptions such as operating hours existing and proposed equipment operational details must be presented Engineering algorithms and procedures from recognized technical organizations such as ASHRAE SMACNA ANSI etc must be used Use rated performance factors tested under accepted procedures specified by recognized rating agencies such as AHRI ANSI ASTM etc Provide an explanation when equipment performance rating conditions vary from standard conditions

In support of the calculations extensive documentation must be provided that provides the basis for the savings estimates The documentation must provide information on the equipment operating schedule daily and seasonal load profile and baseline AND energy efficient equipment performance at the operating loads Typical documentation for custom projects often includes bull Engineering or architectural drawings and ldquoequipment schedulerdquo sheets bull Component specification sheets that include part load efficiency or performance

factors bull Spreadsheet calculations or inputoutput files and results from system modeling or

other engineering analysis using accepted engineering algorithms and practices bull Log sheets trend logs from a building management system or other operating

documentation that are often necessary to document operating hours and equipment loading and used as a basis for the calculations (in some cases short term monitoring may be required to document the load profile)

bull Control sequence of operations that are necessary where controls play a part in the savings equation

Additional documentation other than that described in the application may be required for program participation Larger projects may also require pre- and post-project sub metering or monitoring of loads andor power input as part of another measurement and verification activity to demonstrate the actual energy savings that are realized

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 46

Baseline for Custom Analysis Where equipment is replaced prior to the end of its rated service life in order to achieve energy savings the existing equipment performance may be used as the baseline in the energy savings calculations Where equipment is replaced due to failure or for other reasons (such as obsolescence or a need for more capacity) the baseline performance used in the savings calculation should be either the minimum performance that would be required by code for that equipment type and application (where a code applies) or the performance of the equipment that would have been selected as the customers standard practice when a code does not apply

Baseline or Existing System Summary On custom worksheet on application form include make model number name plate information (such as operating voltage and rated full load amps) rated capacity quantities equipment condition and age facility operating hours equipment operating schedule and load curves If needed attach separate sheets

All decisions regarding incentives for custom projects are in the sole discretion of PECO

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 47

APPENDIX PROGRAM UPDATES SUMMARY (Q1 2017) Multifamily Nursing Home and Assisted Living retrofit customers need to apply for incentives through the PECO Smart Ideas Multi-Family Program administered by Franklin Energy For more information please contact Taylor Adler at tadlerfranklinenergycom or call 1-844-4BIZ-SAVE Multifamily Nursing Home and Assisted Living new construction customers can proceed with applying for incentives here

Revised Incentives

Data Centers

Measure Incentive Effective Immediately Previous Incentive

Air-cooled chiller for data centers $40ton $10ton Air-cooled chiller without condenser for data centers $20ton $10ton

Computer room air conditioner $30ton $7ton Water-cooled centrifugal chiller for data centers $30ton $5ton Water-cooled positive displacement or reciprocating chiller for data centers

$30ton $5ton

Uninterruptible power supply 20-100 kVA $10kVA $6kVA Uninterruptible power supply gt100 kVA $10kVA $1kVA Mainframe refresh $20kW installed $5kW installed Server refresh $20kW installed $4kW installed Server virtualization $400kW reduction $4kW reduction Thin clients $5units $4units

Lighting (Effective Immediately)

Measure Incentive Effective Immediately Specification Previous

Incentive Specification

New construction exterior LED outdoor flood light LED parking garage and canopy lighting LED polearm mounted parking and roadway lighting LED wall mount fixture

$005kWh (custom)

Lighting Power Density (LPD) Requirements Unchanged

$10-54 fixture

Lighting Power Density (LPD) (Wft2) by Space Type or Building Area

LED Replacement Lamps (Tubes) 2

$250lamp 5 Min Watts Reduced

$250lamp 6 Min Watts Reduced

LED Replacement Lamps (Tubes) 4

$400lamp 10 Min Watts Reduced

$400lamp 12 Min Watts Reduced

Permanent Fixture Removal $010Watt removed

Clarification of calculation to represent actual Wattage removed

$010Watt removed

Lighting (Effective 6117)

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 48

Measure Incentive Effective 6117 Specification Previous

Incentive Previous Specification

Interior LED high-bay fixtures andor retrofit kits if lt 20000 LED Lumens

$50fixture 150 Min Watts Reduced

$75fixture 150 Min Watts Reduced

Interior LED high-bay fixtures andor retrofit kits if gt 20000 LED Lumens

$75fixture 225 Min Watts Reduced

$75fixture 150 Min Watts Reduced

New Incentives

Compressed Air

Measure New Incentive Effective Immediately Variable speed air compressor $30compressor HP Compressed air system optimization $50compressor HP

HVAC

Measure New Incentive Effective Immediately ECM circulation pump $50pump Retro-commissioning cooling systems $750ton Retro-commissioning whole building $010square foot Energy management system $25ton Demand controlled ventilation $25ton Water-cooled air conditioner $22ton

Food Service

Measure New Incentive Effective Immediately Combination oven $200unit ENERGY STARreg commercial convection oven $150unit ENERGY STARreg commercial fryers $100unit ENERGY STARreg commercial hot holding cabinet $200unit

Refrigeration

Measure New Incentive Effective Immediately Air-cooled refrigeration condenser $10ton Oversized condenser with VFD $10ton Case light occupancy controls $750door

Lighting

Measure New Incentive Effective Immediately Interior central lighting controls $00175sq foot

Motors and Drives

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 49

-

Measure New Incentive Effective Immediately VFD for dust collection system motor $50HP

Application Clarifications and Revised Requirements

Clarification of LED Eligibility for New Construction or Retrofit Projects

LED Eligibility is determined by whether lighting products are listed in either the DesignLights Consortium (DLC) Qualified Products List of commercial-grade LED luminaires or the US Environmental Protection Agency database of ENERGY STAR certified products For products not yet listed contractors may submit LM79 and LM80 test reports PECO Smart Ideas engineers will review test reports to determine if the product in question meets performance specifications

Revised W 9 Requirement

W-9 forms EIN numbers are no longer required

Deletion of erroneous statement in New Construction Lighting

The following statement from previous Business Manual has been deleted ldquoThe minimum lighting power density used to calculate the incentive shall be no lower than 50 of the ASHRAE 901-2007 valuerdquo

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 50

  • Commercial amp Industrial Program Application Manual
    • Follow This Easy Process
      • Pre-Approval Application Checklist
      • Final Application Checklist
          • Terms and Conditions
            • Program Effective Dates
            • Program and Project Eligibility
            • Incentive Payment Limits
            • Application Review Process
            • Inspections andor PUCrsquos Statewide Program Evaluation
            • Requirements for Custom Project Electricity Savings Calculation
            • Tax Liability
            • No Endorsement
            • Warranties
            • Limitation of Liability
            • Assignment
            • Customerrsquos Certification
            • Termination
            • Acknowledgement
              • Retrofit Lighting Solutions
                • General Linear Fluorescent Lamp and Ballast Specification Requirements
                • LED Lamps and Fixtures
                • Minimum Watts Reduced
                • Linear LED (Tubes)
                • Permanent Fixture Removal
                  • LED Traffic Signals
                    • LED Traffic Signals Incentive Table
                      • New Construction Lighting Specifications
                        • New Construction Lighting Incentives Table
                          • New Construction Lighting Power Density Code
                              • Exterior New Construction Lighting
                              • HVAC Equipment
                                • Air-Source Air Conditioners and Air-Source Heat Pumps
                                • Package Terminal Systems (Replacements)
                                • Ductless Mini-Split Heat Pump lt54 Tons
                                • Geothermal Heat Pump
                                  • Other HVAC Equipment
                                    • Hotel Guest Room Occupancy Sensor
                                    • ECM Circulation Fan
                                    • ECM Circulation Pump
                                    • Retrocomissioning Cooling Systems
                                    • Retrocomissioning Whole Building
                                    • Energy Management System
                                    • Demand Controlled Ventilation
                                    • Other HVAC Incentives Table
                                      • Unitary HVAC Chillers
                                        • Air-Cooled Chillers Water Cooled Positive Displacement Reciprocating Chillers and Water Cooled Centrifugal Chillers
                                          • Refrigeration
                                            • Anti-Sweat Heater Controls
                                            • Evaporator Fan Controls
                                            • Floating Head Pressure Controls
                                            • Automatic Door Closers for Walk-In Coolers and Freezers
                                            • EC Motor for Walk-inReach-in Refrigerated cases or Freezer cases
                                            • ENERGY STAR Solid Door Freezer and Glass Door Freezer and Refrigerators
                                            • Refrigeration Suction Pipe Insulation
                                            • Night Cover
                                            • Strip Curtain on Walk-In CoolerFreezer
                                            • Evaporator Coil Defrost Control
                                            • Variable Speed Refrigeration Compressor
                                            • Add Doors to Open Refrigerated Cases
                                            • Door Gaskets
                                            • Zero Energy Doors
                                            • Air Cooled Refrigeration Condenser
                                            • Oversized Condenser with VFD
                                            • Case Light Occupancy Controls
                                            • LED Open Case Lighting
                                            • LED Enclosed Case Lighting Refrigerated
                                            • LED Enclosed Case Lighting Freezer
                                              • Food Service
                                                • Beverage and Snack Machine Controls
                                                • ENERGY STARreg Refrigerated Beverage Vending Machines
                                                • ENERGY STARreg Electric Steam Cooker
                                                • ENERGY STARreg Electric Combination Oven
                                                • ENERGY STARreg Commercial Convection Oven
                                                • ENERGY STARreg Commercial Fryers
                                                • ENERGY STARreg Commercial Hot Holding Cabinet
                                                  • Motors and Variable Frequency Drives
                                                    • Early Replacement Motors
                                                    • Variable Frequency Drives on HVAC Fan Applications
                                                    • Variable Frequency Drives on Pump Applications
                                                    • Variable Speed Control for Kitchen Exhaust Hoods
                                                    • Variable Speed Drives for Process or Other Equipment
                                                      • Domestic Hot Water
                                                        • Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater
                                                        • Heat Pump Water Heater
                                                        • Low Flow Pre-Rinse Spray Valve
                                                        • Domestic Hot Water Incentive Table
                                                          • Compressed Air Systems
                                                            • No-loss Condensate Drain
                                                            • Air-Entraining air nozzle
                                                            • Storage Tanks for LoadNo Load Screw Compressors
                                                            • Cycling Refrigerated Thermal Mass Dryer
                                                            • Variable Speed Air Compressor
                                                            • Compressed Air System Optimization
                                                            • Compressed Air Systems Incentive Table
                                                              • Data Centers
                                                                • Air Cooled Chiller
                                                                • Air Cooled Chiller without Condenser
                                                                • Computer Room Air Conditioner
                                                                • Computer Room Air Handler Variable Speed
                                                                  • Replacing constant speed CRAH with VSD CRAH
                                                                    • Water Cooled Centrifugal Chiller
                                                                    • Water Cooled Positive Displacement or Reciprocating Chiller
                                                                    • Uninterruptible Power Supply
                                                                    • Mainframe Refresh
                                                                    • Server Refresh
                                                                      • Whole Building Systems
                                                                        • Whole Building Systems Approach
                                                                        • How to Apply for Whole Building Systems Incentives
                                                                        • Customer Eligibility
                                                                        • Project Eligibility
                                                                        • Whole Building Systems Incentives Table
                                                                          • Custom Project Specifications
                                                                            • Instructions for Energy Savings Calculations for Custom Projects
                                                                            • Equipment Information Submittals
                                                                            • Energy Savings Calculations
                                                                            • Baseline for Custom Analysis
                                                                            • Baseline or Existing System Summary

Storage Tanks for LoadNo Load Screw Compressors 40

Cycling Refrigerated Thermal Mass Dryer 40

Variable Speed Air Compressor 40

Compressed Air System Optimization 41

Compressed Air Systems Incentive Table 41

Data Centers 42

Air Cooled Chiller 42

Air Cooled Chiller without Condenser 42

Computer Room Air Conditioner 42

Computer Room Air Handler Variable Speed 42

Replacing constant speed CRAH with VSD CRAH 42

Water Cooled Centrifugal Chiller 42

Water Cooled Positive Displacement or Reciprocating Chiller 42

Uninterruptible Power Supply 42

Mainframe Refresh 42

Server Refresh 43

Whole Building Systems 44

Whole Building Systems Approach 44

How to Apply for Whole Building Systems Incentives 44

Customer Eligibility 45

Project Eligibility 45

Whole Building Systems Incentives Table 45

Custom Project Specifications 46

Appendix Program Updates Summary (Q1 2017) 48

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 4

PECO Smart Ideas for Your Business

Commercial amp Industrial Program Application Manual

Program is offered and incentive values and measures contained in this application are valid from June 1 2016 to May 31 2021 or until funds are exhausted

Incentive values and measures may be modified or terminated at any time without prior notice

Follow This Easy Process

Step 1 Verify your Eligibility Applicant must verify that they are a business customer of PECO (commercial industrial

governmental institutional and non-profit) Multifamily applicants may also apply Detailed information is posted on wwwpecocomsmartideas

Project must be a new facility improvement that results in an improvement in electric energy efficiency (kWh) andor a permanent reduction in electric energy usage

All equipment must be installed in facilities served by PECO with a valid PECO account number on an eligible PECO non-residential rate

Refer to the technical specifications in this Application Manual to check eligibility of equipment for incentives

Step 2 Submit Pre-approval Application to Reserve Funds

A pre-approval application must be submitted before you purchase equipment or technology for which the incentive is being requested Applications can be submitted via online mail email or fax

Email pecosmartideasdnvglcom

Mail PECO Smart Ideas for Your Business

4377 County Line Road Chalfont PA 18914

Fax

215-996-3982

Incentive funds will be reserved when your prendashapproval application is approved Complete the Applicant Information form for each of the measures that you are installing

Lighting projects require a lighting worksheet and inventory to be completed in addition to the application form You may submit the application via mail fax or e-mail

For some projects a pre-installation inspection will be required Most projects require documentation of the equipment being replaced

Incentive funds are reserved for 90 days Contact the PECO Smart Ideas team for specific questions regarding funding reservations and extensions

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 5

Step 3 Install Equipment or Perform Project Work The equipment installed must meet or exceed the specifications and requirements found

in measures tables and detailed in the Application Manual Equipment must be installed within the program period

Step 4 Submit Final Application Submit a final application as soon as possible after the project is completed within 90 days of

project completion but no later than May 15 2021 The final application is the same form as the pre-approval application Include the following documentation with your final application customercontractor information a signed final application agreement itemized invoices specifications and an updated scope of work

The program team will review your final application For some projects a final inspection will be part of the final review

The program team will send incentive checks four to six weeks after your final application is approved

If you need assistance please contact our program hotline 866-371-9343

Please visit our website wwwpecocomsmartideas

Pre-Approval Application Checklist Final Application Checklist

Registration Number on Application Signed Final Agreement Form (if applicable) Itemized Invoices

Documentation of existing equipment for Equipment SpecificationsCut Sheets for retrofit projects changes in equipment

Lighting worksheet for lighting projects Certificate of Occupancy (for New Equipment SpecificationsCut Sheets Construction projects only)

Updated Scope if project changed (please Copy of Current PECO Bill advise program staff during installation if Customer Signature on Customer

Acknowledgement scope changes Increase in incentive amount is not guaranteed)

Supporting Documentation Guidelines

Lighting Please attempt to submit photos of existing lighting Projects gt750000 kWh require lighting logging data DLCENERGY STAR certification documentation submittal will streamline review process Plansengineering submittals will be requested for large projects Square footage for centrally-controlled lighting control systems may be required

VFDs Nameplate photos andor engineering schedules of existing motors

Custom or lsquolargersquo (gt250000 KWh) mechanical projects MampV plan will be required for larger projects Program engineers will contact participants to establish MampV protocols

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 6

Terms and Conditions

PECO Energy Company (PECO) is offering prescriptive and custom incentives under the PECO Smart Ideas for Your Business to facilitate the implementation of cost-effective energy efficiency measures for commercial and industrial customers Any and all energy savings or environmental credits generated by the project described in this application will be retained by PECO

Funds are limited and subject to availability The program may be modified or terminated without prior notice

Program Effective Dates

The program is available until May 31 2021 The current cycle year runs from June 1 2016 through May 31 2017 (lsquoProgram Year Eightrsquo) Incentives are offered until approved funds are exhausted or until May 15 2021 whichever comes first All projects must be completed and the final applications received no later than May 15 2021 to be eligible for incentives

Program and Project Eligibility

Smart Ideas for Your Business incentives are available for the common energy efficiency measures listed in this Application Manual Program incentives are available under PECO Smart Ideas for Your Business to non-residential customers within PECOs service territory These incentives are available to all customers who pay into the Energy Efficiency Charge and receive their electricity over PECOrsquos distribution network regardless of the retail electric supplier

Most commercial projects involving energy savings are eligible Incentives are available for both prescriptive and custom measures Prescriptive measures are energy efficiency measures with pre-determined savings and incentive levels and are paid on a per unit basis These measures are available for specific Lighting HVAC Refrigeration and Food Service Variable SpeedFrequency Drives Compressed Air and Domestic Water Heater measures Custom measures include energy efficiency measures not listed on the prescriptive application forms Custom incentives must be approved by PECO in advance are determined on a case-by-case basis and are paid per unit of energy (kWh) saved Examples of projects that are NOT eligible for PECO Smart Ideas for Your Business include onndashsite electricity generation projects focused primarily on power factor improvement and renewable energy projects

Installation must be at the customerrsquos facility and provide 100 of the energy benefits as stated in the application for a period of five years or for the life of the product whichever is less PECO has the right to claim a pro-rated amount of any incentive paid if the customer ceases to be a distribution customer of PECO or removes the equipment or systems at any time during the five-year period or the life of the measure

Incentive Payment Limits

Prescriptive and custom incentives cannot exceed 100 of the customerrsquos total costs Contractor labor costs can be considered in the total project cost while customer internal labor costs cannot

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 7

Application Review Process

Pre-approval is required for all projects A pre-approval application must be submitted before you purchase equipment or technology for which the incentive is being requested Pre-approval is not a guarantee of program acceptance Completed applications will be reviewed in the order received The location or business name on the invoice must be the same as the application information The incentive is reserved for the project when PECO receives a complete preshyapproval application and determines that the project meets the program eligibility requirements Applicants who submit incomplete applications will be notified of deficiencies upon review of the application and could lose their place in line in the review process until all requested information is received Applicants are encouraged to call the program hotline if they have any questions about documentation requirements

PECO will review final applications for eligibility and completeness The final application and all required supporting documentation must be received within 90 days of project completion but no later than May 15 2021 to be eligible for incentives Project documentation including original dated invoices for the purchase and installation of the measures andor product specification sheets is required

The project invoice must provide sufficient detail to separate the project cost from the cost of other services such as repairs and building code compliance PECO reserves the right to request additional supporting documentation necessary to ensure measure eligibility and verify that the expected energy savings will occur Requested information may include but is not limited to equipment purchase dates installation dates proof that the equipment is operational manufacturer specifications warranty information and proof of customer co-payment PECO will make every effort to maintain the confidentiality of customer information except that such information must be provided to the PA PUC and its contractor as well as PECOrsquos contractor for measurement and evaluation

The installed measures are not eligible for incentives from other PA Act 129 Phase 3 Energy Efficiency Programs

Inspections andor PUCrsquos Statewide Program Evaluation

PECO its agents measurement and verification contractor andor the PUC statewide program evaluator have the right to audit or inspect all projects to verify compliance with the program rules and verify the accuracy of project documentation This may include pre-installation andor post-installation inspections detailed lighting layout descriptions metering data collection interviews and utility bill data analyses The customer must allow access to project documents and the facility where the measures were installed for a period of five years after receipt of incentive payment by PECO

Requirements for Custom Project Electricity Savings Calculation

The annual electricity savings must be calculated for custom projects using industry accepted engineering algorithms or simulation models The applicant must estimate the annual electricity usage of both the existing and proposed equipment based on the current operation of the facility If the existing equipment is at the end of its rated useful life the applicant must substitute equipment that would meet the applicable federal and local energy codes as the baseline when calculating the annual energy savings The applicant must be able to clearly describe the method used to calculate the savings The applicant must provide all assumptions used in the calculations and document the source for these assumptions Further information on custom measures can be found in the Application Manual which can be downloaded from

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 8

wwwpecocomsmartideasThe method and assumptions used by the applicant to calculate the annual savings will be reviewed by PECO PECO has sole and final determination of the annual energy savings to be used in calculating the incentive amount PECO also reserves the right to require specific measurement and verification activities including monitoring both before and after the retrofit and to base the incentive payment on the results of these activities

PECO may need to conduct inspections both before and after the retrofit projects to verify equipment and operation conditions Pre-approval application must be submitted while the existing equipment is still in operation in order to allow PECO the opportunity to view the existing equipment

Tax Liability

Incentives may be taxable for most taxpayers If the incentive is more than $600 it will be reported to the IRS and the customer will be provided with an IRS form 1099 unless the customer is exempt PECO is not responsible for any tax liability that may be imposed on any customer as a result of the payment of program incentives All customers must supply their Federal Tax Identification number to PECO in order to receive a Program Incentive Please consult with your tax professional for information on the tax treatment of the incentives

No Endorsement

PECO does not endorse support or recommend any particular manufacturer product or system design in promoting this program and PECO does not guarantee any specific level of energy savings with respect to any product system design or energy efficiency measure

Warranties

PECO DOES NOT WARRANT THE PERFORMANCE OF INSTALLED EQUIPMENT ANDOR SERVICES RENDERED AS PART OF THIS PROGRAM EITHER EXPRESSLY OR IMPLICITLY NO WARRANTIES OR REPRESENTATIONS OF ANY KIND WHETHER STATUTORY EXPRESSEDOR IMPLIED INCLUDING WITHOUT LIMITATIONS WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE REGARDING EQUIPMENT OR SERVICES PROVIDED BY A MANUFACTURER OR VENDOR CONTACT YOUR VENDORSERVICES PROVIDER FOR DETAILS REGARDING PERFORMANCE AND WARRANTIES

Limitation of Liability

By virtue of participating in this program customers agree to waive any and all claims or damages against PECO except the receipt of the program incentive if eligible Participating Customers agree that PECOrsquos liability in connection with this program is limited to paying the program incentive specified Under no circumstances shall PECO its representatives agents or subcontractors be liable for any lost profits special punitive consequential or incidental damages or for any other damages or claims connected with or resulting from participation in this program

Assignment

Customers may assign a portion or all of their program incentive payment to a specified vendor

Customerrsquos Certification Customer certifies that heshe purchased and installed the equipment listed in the application Customer agrees that all information is true and that heshe has conformed to all of the program and equipment requirements listed in the application

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 9

Termination

PECO reserves the right to extend modify (this includes modification of program incentive levels) or terminate this program without prior or further notice

Acknowledgement

I have read understood and am in compliance with all rules and regulations concerning this incentive program I certify that all information provided is correct to the best of my knowledge and I give PECO permission to share my records with the Pennsylvania PUC and agents representatives and contractors it selects to manage coordinate or evaluate the program Additionally I hereby authorize PECO to have reasonable access to my property to inspect the installation and performance of the equipment and installations that are eligible for incentives under the guidelines of the program

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 10

Retrofit Lighting Solutions

General Linear Fluorescent Lamp and Ballast Specification Requirements 32w 4ft HPT8 and reduced wattage T8 lamps must be listed on the Consortium of Energy Efficiency (CEE) product list or must meet CEE standards For further information visit wwwcee1org

LED Lamps and Fixtures The integral lamp or fixture must appear on the Energy Star Qualified Products List or the Design Lights Consortium Qualified Products List

bull Energy Star Qualified Fixture Product List httpwwwenergystargov bull Energy Star Qualified Integral LED lamps httpwwwenergystargov bull Design Lights Qualified Product List httpwwwdesignlightsorg

Minimum Watts Reduced Energy efficient fixtureslamps are required to be lower in load than existing fixtureslamps by specified levels the Minimum Watts Reduced Each lighting measure has its own Minimum Watts Reduced that must be met as eligibility requirement These levels are listed in the lighting worksheet ldquoLighting Incentives Tablersquo tab and reproduced below

Linear LED (Tubes) Linear LED lamps must be listed on the Design LightsTM Consortium (DLC) Qualified Products List

Type A LEDs bull Type A LED linear lamps are powered by a fluorescent ballast bull If present existing magnetic ballast must be removed and replaced with a compatible energy- efficient electronic ballast bull DLC Primary Use Requirement ndash DLC-listed equipment must be classified with one of the following Primary Use designations

o Replacement Lamps (Plug and Play) (UL Type A) bull Label must be affixed to the interior of fixture in a prominent location Label should indicate that the fixture has been retrofitted with

TLEDs and that fluorescent lamps should not be installed as replacements

Type B LEDs bull Type B LED tubes are powered by an internal driver bull Existing fluorescent ballast must be removed and fixturersquos incoming power wires are connected directly to the lamp sockets Strict

adherence to installation instructions is critical when rewiring existing fixtures

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 11

bull The LED linear lamps must be delivered as part of a UL 1598C Classified Luminaire Retrofit Kit with instructions explaining the LED linear lamps must be installed on a luminaire that is already UL Listed

bull The retrofitted luminaire must be clearly identified using the label included with the Retrofit Kit indicating that the luminaire has been modified and can no longer operate the originally intended fluorescent lamp(s)

Type C LEDs

bull Type C LED linear lamps are powered by an external driver bull Existing fluorescent ballast must be removed and replaced with a compatible external driver bull DLC Primary Use Requirement ndash DLC-listed equipment must be classified with one of the following Primary Use designations

o 2-lamp External Driver Lamp-Style Retrofit Kits (UL Type C) o 3-lamp External Driver Style Retrofit Kits (UL Type C) o 4-lamp External Driver Lamp-Style Retrofit Kits (UL Type C)

bull Technical specifications (manufacturerrsquos cut sheet) for the driver must be submitted with the application

Permanent Fixture Removal This measure is to be used only in conjunction with lighting retrofits and is intended for spaces that are currently over lit Incentives are paid $010watt reduced only on fixtures removed not on total watts reduced for entire projects Overall net lumen reduction must be achieved in order to qualify for a permanent fixture removal incentive

Example

(20) Existing fixtures at 10000 lumens each = 200000 lumens

(14) Proposed fixtures at 15000 lumens each = 210000 lumens

Since there is not a net reduction in lumens the six fixtures removed would not be eligible for a permanent fixture removal incentive

It is encouraged that spaces meet recommended foot-candle levels as detailed by IESNA Lighting Design Guide A Program Engineer will evaluate lumens reduction based on the type of fixtures removed and the DLC lumens rating of the fixtures installed

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 12

RETROFIT INTERIOR LIGHTING TABLE

Measure Code

Min Measure Name Watts Incentive Unit

Reduced Technical Specifications

CFL Lighting

CFL1A ENERGY STAR Hard-Wired CFL fixture Indoor AccentTrack 20 $250 lamp

Only complete new fixtures or modular hardwired retrofits with hardwired electronic ballasts qualify

CFL ballast must be programmed start or programmed rapid start with a power factor (PF) ge 090 and a total

harmonic distortion (THD) le 20 Screw-in CFLs are not eligible for this incentive

CFL1B ENERGY STAR Hard-Wired CFL fixture Indoor Directional WallCeiling Mount 20 $250 lamp

CFL1C ENERGY STAR Hard-Wired CFL fixture Indoor Omni-Directional WallCeiling Mount 20 $250 lamp

CFL2A ENERGY STAR Hard-Wired CFL fixture Indoor Portable LampTorchiere 20 $1 lamp

CFL2B ENERGY STAR Hard-Wired CFL fixture Indoor Recessed Downlight 20 $1 lamp

CFL2C ENERGY STAR Hard-Wired CFL fixture Indoor Recessed Downlight Retrofit Module 20 $1 lamp

CFL2D ENERGY STAR Hard-Wired CFL fixture Indoor Under CabinetStrip 20 $1 lamp

CFL3A ENERGY STAR Hard-Wired CFL fixture Outdoor Directional WallCeilingGroundPole Mount 30 $3 lamp

CFL3B ENERGY STAR Hard-Wired CFL fixture Outdoor Omni-Directional WallCeilingGroundPole Mount 30 $3 lamp

CFL3C ENERGY STAR Hard-Wired CFL fixture Outdoor Recessed Downlight 30 $3 lamp

CFL3D ENERGY STAR Hard-Wired CFL fixture Outdoor Recessed Downlight Retrofit Module 30 $3 lamp

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 13

Fluorescent Lighting FL1 Interior T5 New Fluorescent Fixture w Electronic Ballast 11 $5 fixture Any T5 is eligible

FL2 T5HO High-Bay Fixture 54 $25 fixture Fixture efficiency must be gt 90

High bay fixtures must be installed at least 15ft above finished floor

FL3 HPT8 High-Bay Fixture 82 $20 fixture Must use High Ballast Factor (gt96) Fixture efficiency must be gt= 85

High bay fixtures must be installed at least 15ft above finished floor

FL4 HPT8 Fixture 20 $5 fixture Must use Low Ballast Factor (lt80)

FL5 RW T8 Lamp - Lamp only 10 $3 lamp Existing T8 fixture re-ballasting to a higher ballast factor are not eligible

HID Measures HID1 Ceramic HID - 25 -39 Watt 95 $13 fixture

Replacing higher wattage HID or High Pressure Sodium or Mercury Vapor

Interior replacements only

HID2 Ceramic HID - 70 Watt 155 $13 fixture HID3 Ceramic HID - 100 Watt 170 $15 fixture HID4 Pulse Start HID - 150 nominal Watts 72 $10 fixture HID5 Pulse Start HID - 350 nominal Watts 100 $13 fixture

HID6 Pulse Start HID - 1000 nominal Watts 400 $15 fixture

Interior LED Fixtures

LED1 ENERGY STAR Integral LED fixture Indoor Recessed Downlight Retrofit Module 38 $7 fixture Retrofit module of existing recessed fixture

LED2 ENERGY STAR Integral LED fixture Indoor Recessed Downlight 38 $7 fixture

New indoor recessed downlight fixture LED3 ENERGY STAR Integral LED fixture Indoor Portable LampTorchiere 30 $7 fixture

LED4 LED AccentTrack Lighting Fixtures 32 $6 head

LED5 LED Low-Bay Fixtures 150 $20 fixture For replacement of HID fixtures mounted le 15 above finished floor

LED6 LED Low-Bay Retrofit Kits 150 $20 fixture

LED8 LED Troffer Fixtures and Retrofit Kits 5 $10 fixture Troffers typically installed in lay-in ceilings 2x2 2x4 configuration

LED9 LED Surface and Suspended Linear Fixtures 25 $10 fixture Examples of LED surface-mounted luminaires include wrap vapor tight and strip fixtures (non-cooler)

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 14

-

Interior LED High Bay Fixtures

LED10A LED High-Bay Fixtures le 20000 LED lumens 150 $50 fixture

High bay fixtures must be installed at least 15ft above finished floor

LED10B LED High-Bay Fixtures gt 20000 LED lumens 225 $75 fixture

LED11A LED High-Bay Retrofit Kits le 20000 LED lumens 150 $50 fixture

LED11B LED High-Bay Retrofit Kits gt20000 LED lumens 225 $75 fixture

LED Parking Garage and Canopy Fixtures

LED12 LED Parking Garage and Canopy Fixtures and Retrofit Kits Outdoor lt= 5000 LED lumens 50 $15 fixture

Fixtures must be physically installed in a parking garage (area where vehicles are physically parked) or

fuel pump canopy Typically represents replacement of le175 W Metal

Halide or equivalent

LED13 LED Parking Garage and Canopy Fixtures and Retrofit Kits Outdoor 5001 - 10000 LED lumens 70 $30 fixture

Typically represents replacement of Metal Halide or equivalent greater than 175W and less than 400W

Product must be installed in a parking garage (area where vehicles are physically parked) or fuel pump

canopy

LED14 LED Parking Garage and Canopy Fixtures and Retrofit Kits Outdoor gt 10000 LED lumens 150 $50 fixture

Typically represents replacement of ge400 W Metal Halide or equivalent

Product must be physically installed in a parking garage (area where vehicles are physically parked) or

fuel pump canopy LED Screw in Lamps

ESLED1 ENERGY STAR Screw-in LED Bulb (Decorative Globe) 14 $5 lamp Lamp with globe shape such as type G

ESLED2 ENERGY STAR Screw-in LED Bulb (Decorative non-globe 14 $5 lamp Lamps with non-globe or candle-like shape such as type B C CA F

ESLED3 ENERGY STAR Screw-in LED Bulb and Low Voltage Mini-Reflector Bulbs (DirectionalReflector) 14 $5 lamp ANSI standard PAR and MR type lamps

ESLED4 ENERGY STAR Screw-in LED Bulb (Standard) 14 $5 lamp Lamp such as A series

ESLED5 ENERGY STAR Screw-in LED Bulb (Standard 3-Way) 14 $5 lamp Lamp such as A series with three light levels

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 15

- -LED Screw in Lamps Smart Bulbs

ESLED6 ENERGY STAR Screw-in LED Bulb (Decorative Globe Smart Bulb) 14 $5 lamp Lamp with globe shape such as type G

ESLED7 ENERGY STAR Screw-in LED Bulb (Decorative non-globe Smart Bulb) 14 $5 lamp Lamps with non-globe or candle-like shape such as

type B C CA F

ESLED8 ENERGY STAR Screw-in LED Bulb (DirectionalReflector Smart Bulb) 14 $5 lamp ANSI standard PAR lamps

ESLED9 ENERGY STAR Screw-in LED Bulb (Standard Smart Bulb) 14 $5 lamp Lamp such as A series

LED Tubes (replacing fluorescent)

TLED1 LED Replacement Lamps (Tubes) 2 5 $250 lamp Refer to Lighting Technical Specifications for requirements DLC Type A B and C are eligible bullType B linear (Interior driver) LEDs have the following installation requirements

bullExisting fluorescent ballast must be removed and fixturersquos incoming power wires are connected directly to the lamp sockets Strict adherence to installation instructions is critical when rewiring existing fixtures bullThe LED linear lamps must be delivered as part of a UL 1598C Classified Luminaire Retrofit Kit with instructions explaining the LED linear lamps must be installed on a luminaire that is already UL Listed bullThe retrofitted luminaire must be clearly identified using the label included with the Retrofit Kit indicating that the luminaire has been modified and can no longer operate the originally intended fluorescent lamp(s)

TLED2 LED Replacement Lamps (Tubes) 4 10 $4 lamp

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 16

LED Exterior Lighting

ELED1 ENERGY STAR Integral LED fixture Outdoor Recessed Downlight Retrofit Module 24 $10 module

ENERGY STAR or DLC Qualified fixtures ELED2 ENERGY STAR Integral LED fixture Outdoor Recessed

Downlight 24 $10 fixture

ELED3 LED Outdoor Flood Light Fixtures lt= 5000 LED lumens 50 $10 fixture Typically represents replacement of le175 W Metal Halide or equivalent Fixtures must be DLC qualified

ELED4 LED Outdoor Flood Light Fixtures gt 5000 LED lumens 70 $15 fixture Typically represents replacement of Metal Halide or equivalent greater than 175W Fixtures must be DLC qualified

ELED5 LED PoleArm Mounted Parking and Roadway Fixtures and Retrofit Kits lt= 5000 LED lumens 50 $25 fixture Typically represents replacement of le175 W Metal

Halide or equivalent Product must be DLC qualified

ELED6 LED PoleArm Mounted Parking and Roadway Fixtures and Retrofit Kits Outdoor gt 10000 LED lumens 150 $75 fixture

Typically represents replacement of Metal Halide or equivalent greater than 400W Product must be DLC

listed

ELED7 LED PoleArm Mounted Parking and Roadway Fixtures and Retrofit Kits Outdoor 5001 - 10000 LED lumens 70 $50 fixture

Typically represents replacement of Metal Halide or equivalent greater than 175W and less than 400W

Product must be DLC listed

ELED8 LED Wall Mount Fixtures and Retrofit Kits Outdoor lt= 5000 LED lumens 50 $25 fixture Typically represents replacement of le175 W Metal

Halide or equivalent Product must be DLC qualified

ELED9 LED Wall Mount Fixtures and Retrofit Kits Outdoor gt 5000 LED lumens 70 $50 fixture

Typically represents replacement of Metal Halide or equivalent greater than 175W Product must be DLC

qualified Permanent Fixture Removal

PFRA Indoor Permanent Fixture Removal combined with lighting retrofit na $010 watt removed Incentive only valid when units = ldquofixturerdquo in this table

Incentive is only offered when net lumens are reduced PFRB Outdoor Permanent Fixture Removal combined with lighting retrofit na $010 watt removed

Other LED Lighting LEDEXIT LED Exit Sign

na

$2 sign Replacing Incandescent or Fluorescent

SIGN1A Indoor LED Channel Signage $8 letter

Replacing Neon SIGN1B Outdoor LED Channel Signage $8 letter

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 17

Lighting Controls

CTL Unitary Sensor Controls

na

$1500 sensor

Passive infrared ultrasonic detectors are eligible Includes daylighting controls and all occupancy controls

Controls can be onoff stepped or continuous (dimming) Daylight sensor controls are required to be commissioned in order to ensure proper sensor calibration and energy savings

Minimum of 30 watts controlled per control

CLC Interior Central Lighting Controls $00175

square foot of area

under control

Automated central lighting control systems with override capabilities

This measure includes centrally-controlled time clocks wireless on off switches bi level switches computer based

controls pre-set scene selection dimmable ballasts and on-off dimmer switches for non-personal tuning

Floor plan must be submitted verifying square footage

DAYOCC Controls Combination - Daylighting and Occupancy Fixture Mounted $1500 sensor Minimum of 30 watts controlled per control

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 18

LED Traffic SignalsThis measure applies to the early replacement of existing incandescent traffic lights and pedestrian signals with LEDs New LED traffic signals must comply with ENERGY STAR requirements which can be found at httpswwwenergystargoviapartnersproduct_specseligibilitytraffic_eligpdf98bfshy1786

LED Traffic Signals Incentive Table

Round Traffic Signals 8 Red

Incentive per Signal

$15

8 Yellow 8 Green 12 Red

12 Yellow 12 Green

Turn Arrow Signals

8 Red

$13

8 Yellow 8 Green 12 Red

12 Yellow 12 Green

Pedestrian Signals

9 Pedestrian Only

$13

12 Hand Only 12 Pedestrian Only 12 Countdown Only

12 Pedestrian and Hand Overlay 16 Pedestrian and Hand Side by

Side 16 Pedestrian and Hand Overlay

16 Hand and Countdown Side-by-Side

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 19

Lighting Controls that Exceed Code Requirements

New Construction Lighting SpecificationsUnder the Lighting Power Density Approach the lighting power installed is compared with the lighting power allowed by code Incentives are available for systems where the installed lighting power is lower than the code-allowed power by at least 10 Savings are based on the Lighting Power Density (LPD) calculated on a watts per square foot basis Incentives will be paid only on the area of the building where the lighting installation is complete and is ready for occupancy If a portion of a building is not built-out such that the lighting in an area is not complete and ready for occupancy then that portion is not eligible for an incentive Baseline lighting power density is based on ASHRAE 901- 2007 Either the Space-by-Space or Building Area method may be used to calculate the LPD for the purposes of the incentive

Required Documentation bull Lighting Worksheet bull COMcheck Interior Lighting Report or equivalent analysis demonstrating space-byshy

space or building area calculations bull Reflected ceiling plans and electrical plan sheets showing lighting fixture layout bull Lighting fixture schedule sheet including fixture counts bull Fixture submittal or specification sheets showing model number and rated fixture wattage bull Architectural floor plans displaying floor area affected by proposed lighting installation

New Construction Lighting Incentives Table Lighting Wattssq ft

Improvement over of Code Incentive

gt= 10 and lt 20 $0035sq gt= 20 and lt 30 $007sq ft gt= 30 and lt 40 $0105sq

gt= 40 $021 sq ft

Incentives will be paid on a ($005kWh) custom basis Please contact Program Staff for eligibility of lighting controls for New Construction projects

Interior Occupancy Sensors Incentives are offered for occupancy-based controls in areas where they are not required by code Passive infrared ultrasonic detectors and fixture-integrated sensors or sensors with a combination sensor are eligible All sensors must be hard-wired and control interior lighting fixtures The incentive is per Watt controlled An inventory of the controlled fixtures and their wattage must be provided for each sensor with the Final Application

Daylight Dimming System Incentives are offered for daylight sensor controls in spaces with suitable available ambient light for at least part of the day Light may be through skylights clerestories windows or ldquolight tubesrdquo The controls can be onoff stepped or continuous dimming The onoff controller should turn off artificial lighting when the interior illuminance meets the desired indoor lighting level The stepped controller generally dims the artificial lighting 50 when the interior illuminance levels reach 50 of the desired lighting levels Continuous or dimming controllers dim artificial lighting proportionally to the available ambient light All types of daylight sensor controls are required to be commissioned in order to ensure proper sensor calibration and energy savings

Required Documentation bull Cut sheets or submittals of lighting control systems Reflected ceiling plans or schedule

showing which fixtures are controlled by lighting controls

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 20

New Construction Lighting Power Density CodeRequirements ndash Space by Space Method

Building Specific Space Types LPD (Wft2) Building Specific Space Types LPD (Wft2)

GymnasiumExercise Center AutomotivemdashServiceRepair 07

Playing Area 14 Manufacturing

Exercise Area 09 Low (lt25 ft Floor to Ceiling Height) 12

CourthousePolice StationPenitentiary High (gt25 ft Floor to Ceiling Height) 17

Courtroom 19 Detailed Manufacturing 21

Confinement Cells 09 Equipment Room 12

Judges Chambers 13 Control Room 05

Fire Stations HotelMotel Guest Rooms 11 Fire Station Engine Room 08 DormitorymdashLiving Quarters 11

Sleeping Quarters 03 Museum

Post Office-Sorting Area 12 General Exhibition 10 Convention Center-Exhibit Space 13 Restoration 17

Library BankOfficemdashBanking Activity Area 15 Card File and Cataloging 11 Religious Buildings

Stacks 17 Worship Pulpit Choir 24

Reading Area 12 Fellowship Hall 09

Hospital Retail

Emergency 27 Sales Area [For accent lighting see 93121(c)] 17

Recovery 08 Mall Concourse 17

Nurse Station 10 Sports Arena

ExamTreatment 15 Ring Sports Area 27

Pharmacy 12 Court Sports Area 23

Patient Room 07 Indoor Playing Field Area 14

Operating Room 22 Warehouse

Nursery 06 Fine Material Storage 14

Medical Supply 14 MediumBulky Material Storage 09

Physical Therapy 09 Parking GaragemdashGarage Area 02

Radiology 04 Transportation

LaundrymdashWashing 06 AirportmdashConcourse 06

AirTrainBusmdashBaggage Area 10

TerminalmdashTicket Counter 15

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 21

New Construction Lighting Power Density CodeRequirements ndash Building Area Method

Building Area Type 221 LPD (Wft2)

Automotive facility 09

Convention center 12

Courthouse 12

Dining bar loungeleisure 13

Dining cafeteriafast food 14

Dining family 16

Dormitory 1

Exercise center 1

Gymnasium 11

Health-care clinic 1

Hospital 12

Hotel 1

Library 13

Manufacturing facility 13

Motel 1

Motion picture theater 12

Building Area Type LPD (Wft2)

Multifamily 07

Museum 11

Office 1

Parking garage 03

Penitentiary 1

Performing arts theater 16

Policefire station 1

Post office 11

Religious building 13

Retail 15

Schooluniversity 12

Sports arena 11

Town hall 11

Transportation 1

Warehouse 08

Workshop 14

221 In cases where both a common space type and a building specific type are listed the building specific space type shall apply

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 22

Exterior New Construction LightingExterior New Construction savings over code lighting power density will be incentivized using custom lighting measure at $005kWh rate Participants must submit exterior lighting plans Submittals COMCHECK REPORT and lighting schedule for exterior lighting Savings are calculated from the LPD (Wsq ft) indicated below Additional information may be required based on the building exterior type and space description indicated below To contribute to incentive LEDs must satisfy program requirements for DLC Energy Star or equivalent listing

Required Documentation bull COMcheck Interior Lighting Report or equivalent analysis demonstrating space-by-space or

building area calculations bull Drawings showing lighting fixture layout bull Lighting fixture schedule sheet including fixture counts bull Fixture submittal or specification sheets showing model number and rated fixture wattage

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 23

Building Exterior Space Description LPD

Unco erect Pariki Ilg Area Parlurng ots arnd Drives 0 15 WfW

B i ing Grournds W al 1Yays lless Hlan 11] e 10 Wltirneru- 00

W a Nays 10 middot de or greater 112 W

Plaza a reas

Spec rest re areas

Stainh1ays 1ow 2

B i ing 8ntrames and Exits Ma efilbies m wr near foot of door width

Other doors 2o w 1r ear foot of door width

Ctmqpies and Overhimgs Free starndillg and a ched tmd 12s w m2 m bullerhangs

0 door sales Op en areas (ind udi Ilg ve id e sales 05 W lo )

street frontage far vehicle sales lots 21] W linear toot in addi middot on to open are-0bullmiddot lo~nce

B i ing facades 0 2 W tfl2 middot or eacil illumirnated N311 or surface

o r 5 0 Wllinear root fo r eac h m n inated N3l1 o r

surface length

Automated te lle r rnachmiddot es a lld 210 W per loca tion plus 91] night deposito liies W 1pernddiliorml A I middot per

1oca middot om

Eirltrances and gatehouse inspecliion 125 W ffl2 o middot uncovered slatiaBS a goo~ ed acir ies area

Load ing are-0s or law enforcement 0 5 W 2 of u rnco1bullered area fire ambu rnce and otiher emergency service ibullehmiddotctes

Drive-through w indOWs a taslrood 400 W per drive-Hlrough restaurants

Parking near 24 -h our retail 80111 W per main entry entmn ces

HVAC Equipment Air-Source Air Conditioners and Air-Source Heat Pumps New unitary air conditioning units or air source heat pumps that meet or exceed the qualifying cooling efficiency shown in the HVAC Incentives Worksheet are eligible for an incentive They can be either split systems or single package units The efficiency of split systems is based on an ARI reference number All packaged and split system cooling equipment must meet Air Conditioning and Refrigeration Institute (ARI) standards (210240 320 or 340360) be UL listed use a minimum ozone-depleting refrigerant (eg HCFC or HFC) All required efficiencies are based on the Consortium for Energy Efficiency (CEE) high-efficiency commercial air conditioning and heat pump specifications (wwwcee1org) A manufacturerrsquos specification sheet indicating the system efficiency must accompany the application Disposal of the existing unit

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 24

must comply with local codes and ordinances

Package Terminal Systems (Replacements) Package terminal air conditioners and packaged terminal heat pumps are through-the-wall self-contained units that are 2 tons (24000 Btuh) or less All EER values must be rated at 95degF outdoor dry-bulb temperature

Ductless Mini-Split Heat Pump lt54 Tons Incentives are offered for Ductless Mini-Split Heat Pump lt54 Tons with SEER rating greater than or equal to 120 and EER greater than or equal to 145 and HSPF greater than or equal to 90

Geothermal Heat Pump Geothermal equipment is a high-efficiency groundwater source water source or ground source heat pump system that meets or exceeds the energy efficiency requirements shown in the tables below These measures do not apply to heat pump systems coupled with non-heat pump systems such as chillers rooftop AC units boilers or cooling towers which must be filed as custom measures All HVAC applications other than comfort cooling and heating such as process cooling must also be applied for as custom measures

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 25

HVAC Heating Qualifying Incentive

Equipment Type and Cooling Capacity Cooling Qualifying Efficiency ($ per cooling Measure Code Efficiency

ton)

Air Cooled Air Conditioner

H01 lt 54 tons (lt 65000 Btuhr) 15 SEER NA $22

H02 lt 54 and lt 11 25 tons

125 IEER $22 (lt 65 000 Btuh and lt 135 000 Btuhr) NA

H03 lt11 25 and lt 20 tons

123 IEER NA $22 (lt 135000 Btuh and lt 240000 Btuhr)

H04 lt 20 and lt 6333 tons (~

11 1 IEER NA $22 240000 Btuh and lt 760000 Btuhr)

HOS ~ 6333 Ions (~ 760000 Btuhr) 103 IEER NA $22

Air Cooled Heat Pumps

H06 lt 54 tons (lt 65000 Btuhr) 143 SEER 87 HSPF $30

H07 lt 54 and lt 11 25 tons

123 IEER 3 3 COP $30 (lt 65000 Btuh and lt 135000 Btuhr)

HOS lt11 25 and lt 20 tons

1U IEER 3 2 COP $30 (lt 135000 Btuh and lt 240000 Btuhr)

H09 lt 2000 tons (240000 Btuhr) 105 IEER 3 2 COP $30

Packaged Terminal Systems (PTAC and PTHP) (PTHP only)

H10 lt 8000 Btuhr (lt066 tons) 11 8 EER 33 $17

H11 ~8000 and lt10500 Btuhr (~066 and lt 0875 tons) 11 4 EER 32 $17

H12 gt10500 Btuhr ( 875 tons) 107 EER 31 $17

H22 lt 54 tons (lt 65000 Btuhr) 121 EER 12 3 IEER NA $22

lt 54 and lt 11 25 tons 121 EER 12 3 IEER $22 H23

(lt 65000 Btuh and lt 135000 Btuhr) NA

H24 lt11 25 and lt 20 tons

120 EER 12 2 IEER $22 (lt 135000 Btuh and lt 240000 Btuhr) NA

H25 lt20 and lt 633 tons

119 EER 12 2 IEER $22 (lt 240000 Btuh and lt 760000 Btuhr) NA

H26 ~ 633 tons( lt760000 Btuhr) 110 EER 11 1 IEER NA

$22

HVAC Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 26

Other HVAC EquipmentHotel Guest Room Occupancy Sensor Incentives are offered for occupancy-based controls that control electric air conditioning air source heat pumps and or electric heating units for individual hotel rooms Systems with nonshyelectric heat are not eligible Sensors must be controlled by automatic occupancy detectors or a key-card system and the default setting for controlled units differ by at least 5 degrees (or shut the unit fan and heating or cooling off completely) from the operating set point during unshyoccupied periods The control system may also be tied into other electric loads such as lighting and plug loads to shut them off when occupancy is not sensed The incentive is per room Replacement or upgrades of existing occupancy-based controls are not eligible as a prescriptive incentive

Economizer Integrated Dual Enthalpy Economizer ControlsThis measure is targeted to non-residential establishments whose HVAC equipment is not equipped with a functional economizer

Circulation Fan High-Volume Low-SpeedFans must be greater than 16 feet in diameter and have variable speed control

ECM Circulation Fan This measure is targeted to non-residential customers whose air handling equipment currently uses a SP or PSC fan motor rather than an ECM This measure applies only to circulating fan motors of 1 HP or less Above 1 HP motors are governed by NEMA standards and would see little to no efficiency benefit by adding an ECM The targeted fan can supply heating or cooling only or both heating and cooling

ECM Circulation Pump This measure is targeted for replacement of a shaded pole or permanent split capacitor pump or motor with an electronically commutated pump or motor le75 HP

Retrocomissioning Cooling Systems Confined to chiller plant andor isolated packaged units For reservation must contain proposal with defined scope at equipment level that demonstrates energy savings For final approval required final commissioning report including raw data (TAB reports) demonstrating actual scope

This prescriptive measure can be used for facilities with maximum cooling demand less than 1687 tons Larger systems require the use of custom HVAC measure

Retrocomissioning Whole Building Covers all relevant major mechanical systems such as chiller plant air side systems compressed air andor process systems For reservation must contain proposal with defined scope at equipment level that demonstrates energy savings For final approval required final commissioning report including raw data (TAB reports) demonstrating actual scope

This prescriptive measure can be used for facilities less than 404858 square feet Larger facilities require the use of custom HVAC measure

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 27

Energy Management System For installing a web-based building automation system in existing buildings that currently have no digital automated HVAC controls or have outdated pneumatic control systems with inoperable time control functions Existing HVAC control systems must not have time-of-day scheduling Upgrading obsolete EMS HVAC system with inoperable time clock functions will be reviewed on a case-by-case basis for incentive eligibility This incentive cannot be combined with incentives for programmable thermostats or setback-setup controls Must include the controls strategy and a scaled floor-plan with controlled areas highlighted HVAC BAS systems must be new and include bull Central time clock control bull Web-based interface with PC-based controls and graphic bull Building performance Tracking bull Open-protocol architecture controls system shall consist of either LonTalk (ANSICEA 7091) or BACNet (ASHRAE ANSI 135) protocol being used between all controlled and controlling devices and every node on the network bull Minimum setback period must exceed 2200 hours per year bull A minimum setback space temperature of at least 10degF when heating and 5degF when cooling bull Ability to adjust schedules and settings remotely over the internet bull Report generation describing energy and operating trends

This prescriptive measure can be used for facilities with maximum cooling demand less than 456 tons Larger systems require the use of custom HVAC measure

Demand Controlled Ventilation New ventilation controls must use carbon dioxide levels to measure occupancy and modify the percentage of outside air based on occupancy levels Only buildings with space heating and cooling requirements are eligible Conditioned spaces must be kept between 65ordmF and 75ordmF during occupied operating hours Carbon dioxide sensors must be installed in conjunction with fully functioning motor operated outside air dampers Dual temperature air-side economizers with zone-level CO2 sensors for rooftop units are eligible

This prescriptive measure can be used for facilities with maximum cooling demand less than 2210 tons Larger systems require the use of custom HVAC measure

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 28

Other HVAC Measures- consult project manual for eligibility specifications HVAC

Measure Incentive Unit Quantity Incentive

Measure Code er Unit

H1 8 Hotel Guest Room Occupancy Sensor Room $20

H1 9 Economizer Integrated Dual Enthalpy Economizer Controls Ton $1 5

H20 Circulation Fan High-Volume Low-Speed Unit $30

H21 ECM Circulation Fan Fan $1 5

H27 ECM Circulation Pump Pump $50

H28 Retrocommissioning Cooling Systems

Ton $750

H29 Retrocommissioning Whole Buidling

Square Foot $010

H29 Energy Management System Ton $2500

H30 Demand Controlled Ventilation Ton $2500

Other HVAC Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 29

Unitary HVAC Chillers

Air-Cooled Chillers Water Cooled Positive Displacement Reciprocating Chillers and Water Cooled Centrifugal Chillers Chiller applications including existing multiple chiller configurations (including redundant or lsquostand-byrsquo chillers) existing chillers serving multiple load groups and chillers in industrial applications are defined as non-standard applications and must follow a site-specific custom protocol $005kWh) rate

Incentives are offered for chillers with an IPLV value (expressed in kW per ton) that is less than or equal to the qualifying efficiency shown in the table below The chiller efficiency rating must be based on ARI Standard 550590-2003 for IPLV conditions The chillers must meet ARI standards 550590-2003 be UL listed and use a minimum ozone-depleting refrigerant (eg HCFC or HFC) The ARI net capacity value should be used to determine the chiller tons A manufacturerrsquos specification sheet with the rated kWton-IPLV or COP-IPLV must accompany the application along with the four point performance data that is the basis for the IPLV The application must include a certification that the chiller is appropriately sized for site design load conditions

Chillers must satisfy efficiency requirements for both full load and IPLV efficiencies for either Path A or Path B The table shows the minimum efficiency ratings to qualify for the prescriptive incentive which must be consistent with the expected operating conditions of the efficient chiller For example if the efficient chiller satisfies Path A and generally performs at part load the appropriate baseline chiller efficiency is the IPLV value under Path A If the efficient chiller satisfies Path B and generally performs at full load the appropriate baseline chiller efficiency is the full load value under Path B Generally chillers operating above 70 percent load for a majority (50 or more) of operating hours should use Path A and chillers below 70 load for the majority of operating hours should use Path B

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 30

C3 lt 75 tons

C4 75 tons and lt 150 tons

cs ~ 150 tons and lt 300 tons C6 ~ 300 tons

Water Cooled Centrifugal Chillers C7 lt 300 tons CB ~ 300 tons and lt 600 tons

C9 ~ 600 tons

Path A

Qualifying Full Load Efficiency

Qualifying IPLV Efficiency

Path B

Qualifying Full Load Efficiency

Qualifying IPLV Efficiency

0780 kWton 0567 kWton 0800 kWton 0540 kWton

0775 kWton 0554 kWton 0790 kWton 0527 kWton

0680 kWton 0522 kWton 0718 kWton 0486 kWton 0620 kWton 0486 kWton 0639 kWton 0441 kWton

0634 kWton 0536 kWton 0639 kWton 0405 kWton 0576 kWton 0494 kWton 0600 kWton 0360 kWton

0570 kWton 0494 kWton 0590 kWton 0360 kWton

I

Incentive ($ton)

$17

$17

Unitary Chiller Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 31

Refrigeration

Anti-Sweat Heater Controls Incentives are offered for devices that sense the relative humidity in the air outside of the display case and cycles or turns off the glass door (if applicable) and frame anti-sweat heaters when the ambient dew point is below a preset set point Technologies that can turn off anti-sweat heaters based on sensing condensation (on the inner glass pane) also qualify Incentive is based on the number of doors

Evaporator Fan Controls This measure is for the installation of controls in medium temperature walk-in coolers The controller reduces airflow of the evaporator fans when there is no refrigerant flow The measure must control a minimum of 120 HP where fans operate continuously at full speed The measure also must reduce fan motor power by at least 75 during the off cycle This measure is not applicable if any of the following conditions apply 1) Compressor runs all the time with high duty cycle 2) Evaporator fan does not run at full speed all the time 3) Evaporator fan motor runs on poly-phase power 4) Evaporator fan motor is not shaded-pole or permanent split capacitor (PSC) 5) Evaporator fan does not use off-cycle or time-off defrost

Floating Head Pressure Controls Controls must vary head pressure to adjust condensing temperatures in relation to outdoor air temperature Must replace existing constant pressure or manually controlled systems to achieve reduced head pressure in order to maintain a minimum saturated condensing temperature of 70 degF or a 20 degF variance below design heat pressure during mild weather conditions Compressor size must be at least 5 HP

Automatic Door Closers for Walk-In Coolers and Freezers The auto-closer should be applied to the main insulated opaque door(s) of a walk-in cooler or freezer The auto-closer must be able to firmly close that door when it is within one inch of full closure This must be a newly installed automatic door closer replacements on previously installed door closers are not eligible for an incentive

EC Motor for Walk-inReach-in Refrigerated cases or Freezer cases Incentives are offered for replacement of an existing standard-efficiency shaded-pole or permanent split capacitor evaporator fan motor in refrigerated display cases or fan coil in walk-ins The replacement unit must be an Electronically Commutated Motor (ECM) This measure cannot be used in conjunction with the Evaporator Fan Controller measure

ENERGY STAR Solid Door Freezer and Glass Door Freezer and Refrigerators Incentives are offered for replacement of existing self-contained refrigerators and freezers with units that are ENERGY STARreg listed Only units with built-in refrigeration systems are qualified Units with remote refrigeration systems or units do not qualify Customers must provide proof that the appliance meets the CEE or ENERGY STAR efficiency specifications using ASHRAE Standard 72-2005 (38degF plusmn 2degF) Incentive is per unit

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 32

Refrigeration Suction Pipe Insulation 1 Must insulate bare refrigeration suction lines of 1 58 inches in diameter or less on existing equipment only 2 Cooler lines require frac34 inch of flexible closed-cell nitrite rubber or an equivalent insulation 3 Freezer lines require 1-inch of flexible closed-cell nitrite rubber or an equivalent insulation 4 Insulation exposed to the outdoors must be protected from the weather (ie jacketed with a medium-gauge aluminum jacket)

Night Cover 1 Must install a cover on an existing open refrigerated display case to decrease its cooling load during off hours 2 The equipment manufacturer must not object to the use of night covers for the existing display case model 3 This rebate is based on the linear footage of the installed 4 The cover must be applied for a period of at least six hours

Strip Curtain on Walk-In CoolerFreezer 1 New strip curtains or plastic swinging doors must be installed on doorways of refrigerated spaces (conditioned to less than 50deg F) 2 Rebate is based on the linear footage of the doorway that the strip curtains are being installed in 3 Opening between the strip curtain and bottom of doorway must be no larger than 1 inch 4 Strips must have an overlay greater than 1 inch

Evaporator Coil Defrost Control 1The current system must include an operating electric defrost system with a functional electroshymechanical time clock 2 Evaporator coil temperature and pressure must be monitored by controller in order to determine optimal defrost cycles 3 New intelligent control systems to control the defrost systems will typically replace timed- defrost controls

Variable Speed Refrigeration Compressor This measure VSD control for refrigeration systems and its eligibility targets applies to retrofit construction in the commercial and industrial building sectors it is most applicable to grocery stores or food processing applications with refrigeration systems This protocol is for a VSD control system replacing a slide valve control system

Add Doors to Open Refrigerated Cases The eligible retrofit equipment is either no sweat doors or doors with anti-sweat heaters If a lighting retrofit is included with the new doors it must consume the same amount of energy or less energy than the old lighting Upgrades to lighting or other system components should be processed separately Horizontal cases are not eligible and should be processed as custom

Door Gaskets PECO Smart Ideas For Your Business CampI Program Application Manual

Q1 2017 pg 33

This measure is applicable to commercial refrigeration and applies to the replacement of worn-out gaskets with new better-fitting gaskets Applicable gaskets include those located on the doors of walk-in andor reach-in coolers and freezers This protocol applies to the main doors of both low temperature (ldquofreezerrdquo ndash below 32 degF) and medium temperature (ldquocoolerrdquo ndash above 32 degF) walk-ins

Zero Energy Doors For this measure a no-heatlow-heat clear glass door must be installed on an upright display case It is limited to door heights of 57 inches or more Doors must have either heat reflective treated glass be gas filled or both This measure applies to low temperature cases onlymdashthose with a case temperature below 0degF Doors must have 3 or more panes Total door rail glass and frame heater amperage ( 120 volt) cannot exceed 039413 amps per door for low temperature display cases Rebate is based on the door width (not including case frame)

Air Cooled Refrigeration Condenser Approach temperature lt8F for low temperature loads lt13F for medium temperature loads

Oversized Condenser with VFD New standalone condenser must no more than 150 larger than load

Case Light Occupancy Controls Acceptable for freezer or refrigerated cases as well as open cases or cases with doors

LED Open Case Lighting For replacing open case T8 or T12 fluorescent fixtures with DLC listed LEDs on refrigerators coolers and freezers

LED Enclosed Case Lighting Refrigerated LED case lighting with or without motion sensors on enclosed refrigerated vertical displays The baseline equipment is assumed to be cases with uncontrolled T8 or T12 linear fluorescent lamps

LED Enclosed Case Lighting Freezer LED case lighting with or without motion sensors on enclosed freezer vertical displays The baseline equipment is assumed to be cases with uncontrolled T8 or T12 linear fluorescent lamps

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 34

Refrigeration Measures Ref Measure

Measure Incentive Unit IncentiveUnit Code R01 Anti-Sweat Heater Controls Door $30

R02 Evaporator Fan Controls Controller $50

R03 Floating-head Pressure Controls HP $20

R04 Automatic Door Closers fo r Walk-in Coolers Door $75

R05 Automatic Door Closers fo r Walk-in Freezers Door $75

R06 Evaporator Fan EC Motor fo r Reach- in Cases Motor $35

RO Evaporator Fan EC Motor fo r Walk-in Cases Motor $50

R08 ENERGY STARreg Glass Door Freezer lt15 Cu Ft Unit $100

R09 ENERGY STARreg Glass Door Freezer 15- 49 Cu Ft Unit $125

R10 ENERGY STARreg Glass Door Freezer ~ 50 Cu Ft Unit $145

R11 ENERGY STARreg Solid Door Freezer Unit $75

R12 ENERGY STARreg Glass Door Refrigerator lt50 Cu Ft Unit $30

R13 ENERGY STARreg Glass Door Refrigerator gt= 50 Cu Ft Unit $50

K14 t NtKGY ~ I AKreg ~Olld Uoor Ketngerator $ OU Cu t-t Unit $~0

R15 Suction Pipe Insulation Walk-in Coolers Linear Foot $050

R16 Suction Pipe Insulation Walk in Freezers Linear Foot $075

R17 Night Cover Linear Foot $800

R18 Strip Curtains on Walk-in Cooler Linear Foot $250

R19 Evaporator Coil Defrost Control Controller $7500

R20 Variable Speed Refrigeration Compressor Compressor $85

R21 Add Doors to Open Refrigerated Cases Door $55

R22 Door Gaskets Door $250

R23 Zero Energy Doors Door $50

R24 A ir Cooled Refrigeration Condenser Ton $10

R25 Oversized Condenser with VFD Ton $10

R26 Case Light Occupancy Controls Door $8

R27 LED Open Cose Lighting Cose $10

R28 LED Enclosed Case Lighting Refrigerated Door $30

R30 LED Enclosed Case Lighting Freezer Door $30

Refrigeration Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 35

Food Service Beverage and Snack Machine Controls Incentives are offered for refrigerated vending machines that contain non-perishable bottled and canned beverages Controller for both types of systems must include a passive infrared occupancy sensor to turn off fluorescent lights and other energized machine systems when the surrounding area is unoccupied for 15 minutes or longer For the refrigerated machines the control logic may include periodic power up at 2-hour intervals or longer to maintain product temperature and provide compressor protection

ENERGY STARreg Refrigerated Beverage Vending Machines Incentives are offered for ENERGY STARreg beverage vending machines Qualifying machines can be found at httpswwwenergystargovproductsothervending_machines

ENERGY STARreg Electric Steam Cooker This measure applies to the installation of electric ENERGY STAR steam cookers as either a new item or replacement for an existing unit Gas steam cookers are not eligible The steam cookers must meet minimum ENERGY STAR efficiency requirements A qualifying steam cooker must meet a minimum cooking efficiency of 50 percent and meet idle energy rates specified by pan capacity

ENERGY STARreg Electric Combination Oven This measure applies to electric ovens capable of handling single 12 x 20 x 25 pan per rack

ENERGY STARreg Commercial Convection Oven The oven must meet or exceed heavy load potato cooking energy efficiency of greater than 70 utilizing ASTM Standard F149 Applies only to electric ovens

ENERGY STARreg Commercial Fryers The commercial fryer must have a tested heavy load (French fry for large vats) cooking energy efficiency of greater than 80 utilizing American Society for Testing and Materials (ASTM) Standard F1361 for commercial fryers and ASTM Standard F2144 for large vat fryers Multiple vat configurations are paid per qualifying vat ENERGY STAR maintains a list of qualifying products and specifications at httpwwwenergystargov

ENERGY STARreg Commercial Hot Holding Cabinet Energy STAR rating electric

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 36

Food Service amp Other Measures FoodOther

Measure Incentive Unit Incentive

Measure Code Unit

F01 Beverage Machine Controls Unit $25

F02 Snack Machine Controls Unit $20

F03 ENERGY STARreg Refrigerated Beverage Vending Machir Unit $125

F04 ENERGY STARreg Commerc ial Steam Cooker Unit $200

F05 ENERGY STARreg Electric Combination Oven Unit $200

F06 ENERGY STARreg Commercial Electric Convection Oven Unit $150

F07 ENERGY STARreg Commerc ial Fryers Unit $100

F08 ENERGY STARregCommerc ial Hot Holding Cabinet Unit $200

Food Service Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 37

Motors and Variable Frequency DrivesEarly Replacement Motors For constant speed and uniformly loaded motors this measure applies to the replacement of old motors with new energy efficient motors of the same rated horsepower Old motors must be less than 15 years Replacements where the old motor and new motor have different horsepower ratings are considered custom measures Motors with variable speeds variable loading or industrial-specific applications are also considered custom measures

Motors Incentive Table Motors

Measure Code

HP Incentive per Motor

M01 15 - 10 $40 M02 11 - 50 $100 M03 51-100 $150 M04 gt100 $300

Only VFDs on unitary systems are eligible Non-unitary systems must be submitted as a custom measure Soft start motors are not eligible

Variable Frequency Drives on HVAC Fan Applications Incentives are offered for installing VFDs on existing HVAC fans that do not have pre-existing VFDs This measure applies to HVAC supply and return fans only All other fans including cooling tower fans must be submitted as custom measures Manually fixed speed settings on HVAC fans must be submitted via custom application The VFD must control motor speed automatically in response to pressure flow temperature or other variable signal The installation of a VSD must accompany the permanent removal or disabling of any throttling devices such as inlet vanes bypass dampers and throttling valves etc The incentive is offered per controlled HP

Variable Frequency Drives on Pump Applications Incentives are offered for installing VFDs on existing chilled water pumps and heating hot water pumps that do not have existing VFDs This measure applies to chilled water pumps and heating hot water pumps only All other pumps must be submitted as custom measures Manually fixed speed settings on pumps must be submitted via custom application The VFD must control motor speed automatically in response to pressure flow temperature or other variable signal The installation of a VSD must accompany the permanent removal or disabling of any throttling devices such as throttling valves The incentive is offered per controlled HP

Variable Speed Control for Kitchen Exhaust Hoods The measure consists of installing a new VSD in conjunction with a sensor control system that varies the exhaust rate of kitchen ventilation (exhaust andor makeup air fans) based on the heat and effluent output from the cooking appliances (ie the more heat and smokevapors generated the more ventilation needed) This involves installing a temperature sensor in the hood exhaust collar andor an optic sensor on the end of the hood that senses cooking conditions and allows the system to automatically vary the rate of exhaust to match requirements by adjusting the fan speed accordingly

Variable Speed Drives for Process or Other Equipment VFD must be used in conjunction with a process (non HVAC) application To qualify for this incentive the driven equipment must operate at least 2000 hours per year Redundant or back- up units do not qualify VFDs replacing existing VFDs do not qualify The VFD must control motor

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 38

speed automatically in response to pressure flow temperature or other variable signal VFDs installed as ldquosoft startrdquo without automatic manual closed loop speed control do not qualify The installation of a VFD must accompany the permanent removal or disabling of any throttling devices such as throttling valves The incentive is per controlled HP and only applies to controlled motors less than 50 HP

VSDVFD Incentives Table VFD

Measure Code

Measure Unit Incentive per Unit

Fan Application

V01 VFD on HVAC Fan HP $25 Pump Application

Variable Speed Control for Kitchen Exhaust Hoods

Variable Speed Drives for Process or Other Equipment

V02 VFD on Chilled Water Pumps HP $25 V03 VFD on Heating Hot Water Pumps HP $25

V04 Kitchen Exhaust Fan Retrofit Hood HP $500

V05 Process Motor lt 50 HP HP $50

Domestic Hot Water Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater This measure documents the energy savings attributed to converting from a standard electric water heater to an ENERGY STAR natural gaspropane-fired water heater or a standard oil-fired water heater with an Energy Factor of 0585

Heat Pump Water Heater This includes heat pump water heaters with energy factors meeting ENERGY STAR criteria The measure described here involves a direct retrofit of a resistive electric water heater with a heat pump water heater It does not cover systems where the heat pump is a pre-heater or is combined with other water heating sources More complicated installations can be treated as custom projects

Low Flow Pre-Rinse Spray Valve This measure applies to efficient low flow pre-rinse sprayers in grocery and food service applications The most likely areas of application are kitchens in restaurants and hotels Only premises with electric water heating may qualify for this incentive In addition the replacement pre-rinse spray nozzle must use less than 16 gallons per minute with a cleanability performance of 26 seconds per plate or less Low flow pre-rinse sprayers reduce hot water usage and save energy associated with water heating

Domestic Hot Water Incentive Table

Measure Code Measure Unit Retrofit Incentive per

Unit

W01 Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater Unit $100

W02 Heat Pump Water Heater Unit $100 W03 Low-Flow Pre-Rinse Spray Valve Valve $17

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 39

Compressed Air SystemsNo-loss Condensate Drain No-loss Condensate Drains are controlled by a sensor that monitors the level of condensate and only open when there is a need to drain condensate They close before compressed air is allowed to escape This measure is targeted to non-residential customers whose equipment is a timed drain that operates on a pre-set schedule Acceptable baseline conditions are compressed air systems with standard condensate drains operated by a solenoid and timer

Air-Entraining air nozzle This measure is targeted to non-residential customers whose compressed air equipment uses stationary air nozzles in a production application with an open copper tube of 18rdquo or 14rdquo orifice diameter Energy efficient conditions require replacement of an inefficient non-air entraining air nozzle with an energy efficient air-entraining air nozzle that use less than 15 CFM at 100 psi for industrial applications

Storage Tanks for LoadNo Load Screw Compressors This measure protocol applies to the installation of air receivers with pressureflow controls to loadno load compressors Loadno load compressors unload when there is low demand The process of unloading is done over a period of time to avoid foaming of the lubrication oil Using a storage tank with pressureflow control will buffer the air demands on the compressor Reducing the number of cycles in turn reduces the number of transition times from load to no load and saves energy The baseline equipment is a loadno load compressor with a 1 galcfm storage ratio or a modulating compressor with blowdown The high efficiency equipment is a loadno load compressor with a minimum storage ratio of 4 gallons of storage per cfm

Cycling Refrigerated Thermal Mass Dryer When air is compressed water vapor in the air condenses and collects in liquid form Some of this condensate collects in the air distribution system and can contaminate downstream components such as air tools with rust oil and pipe debris Refrigerated air dryers remove the water vapor by cooling the air to its dew point and separating the condensate Changes in production and seasonal variations in ambient air temperature lead to partial loading conditions on the dryer Standard air dryers use a hot gas bypass system that is inefficient at partial loads A Cycling Thermal Mass Dryer uses a thermal storage medium to store cooling capacity when the system is operated at partial loads allowing the dryer refrigerant compressor to cycle

This measure is targeted to non-residential customers whose equipment is a non-cycling refrigerated air dryer with a capacity of 600 cfm or below Acceptable baseline conditions are a non-cycling (eg continuous) air dryer with a capacity of 600 cfm or below The replacement of desiccant deliquescent heat-of-compression membrane or other types of dryers does not qualify under this measure

Variable Speed Air Compressor This type of compressor uses a special drive to control the speed (RPM) of the unit which in turn saves energy compared to a fixed speed equivalent

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 40

No-loss Condensate Drain Air-Entraining Air Nozzle Cycling Refrigerated Thermal Mass Dryer

Compressor Incentive per

Equipment Type Units Quantity Daily Operating Unit

Hours

CA04 Storage Tanks for LoadNo Load Screw

Compressor HP $10 Compressors

CA05 Variable Speed Air Compressor

Compressor HP $30

CA06 Compressed Air System Optimization

Compressor HP $50

Compressed Air System Optimization The submitted optimization measures must be identified in an Air System Audit or equivalent study to be eligible The measures must demonstrate energy savings as evaluated by a Program Engineer Additionally measures must also fall under one or more of the category below to be eligible

1) Install storage Receivers (new receivers only replacing existing storage receivers are ineligible)

2) Compressor control (must demonstrate improvement in partial load efficiency of the compress air system including reduceeliminate partially loaded units)

3) Dryer control 4) Source pressure reduction 5) Right-sizing distribution components such as piping filters regulators

connectors and hoses (routine maintenance replacements are ineligible) 6) Leakage detection and repair 7) Eliminate low-efficiency end-usages of compressed air 8) Heat recovery (most reduce electricity consumption of the replaced heat source)

Compressed Air Systems Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 41

lt65000 Btuh

~ 65000 Btuh and lt135000 Btuh

135000 Btuhand lt240000 Btuh

240000 Btuh and lt760000 Btuh

760000 Btuh

154

142

135

125

123

Chiller Capacity Path APath B efficiency (kWton )

lt 150 tons

~150 tons and lt300 tons

300 tons and lt400 tons

400 tons and lt600 tons

600 tons

lt75 tons

~75 tons and lt150 tons

~150 tons and lt300 tons

~300 tons and lt600 tons

600 tons

0610 FU0695 FL and 0550 IPLV0440 IPLV

0610 FU0635 FL and 0550 IPLV0400 IPLV

0560 FU0595 FL and 0520 IPLV0390 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

Path APath B efficiency (kWton )

0750 FU0780 FL and 0600 IPLV0500 IPLV

0720 FU0750 FL and 0560 IPLV0490 IPLV

0660 FU0680 FL and 0540 IPLV0440 IPLV

0610 FU0625 FL and 0520 IPLV0410 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

Data Centers Data Center incentives are available for facilities ranging in size from office server closets to large standalone facilities

Air Cooled Chiller Path APath B EER (BtuWh) lt150 tons 101 FL97 FL and 137 IPLV158 IPLV ge150 tons 101 FL97 FL and 140 IPLV161 IPLV

Air Cooled Chiller without Condenser Air-cooled chillers without condenser must be rated with matching condensers and comply with air-cooled chiller efficiency requirements

Computer Room Air Conditioner

Computer Room Air Handler Variable Speed Replacing constant speed CRAH with VSD CRAH

Water Cooled Centrifugal Chiller

Water Cooled Positive Displacement or Reciprocating Chiller

Uninterruptible Power Supply Must be Energy Star Certified UPS or have full load efficiency rating

ge948 for 20-100 kVA ge978for ge100 kVA

Mainframe Refresh The rated efficiency of the replacement Mainframes power supply must be at least 8 more

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 42

- Equipment Type Units IncentiveUnit

D1 Air Cooled Chiller Ton $4000 D2 Air Cooled Chiller W ithout Condenser Ton $2000 D3 Computer Room Air Conditioner Ton $3000 D4 Computer Room Air Handler Variable Speed Ton $1000 D5 Water Cooled Centrifugal Chiller Ton $3000 D6 Water Cooled Positive Displacement or Reciprocatin $3000 D7 Uninterruptible Power Supply 20-100 kVA $1000 D8 Uninterruptible Power Supply gt 100 kVA $1000 D9 Mainframe Refresh $2000

D10 Server Refresh $2000 D11 PC Power Managment System $600 D12 HVAC System Optimization $005 D1 3 HoUCold Aisle Containment kWh saved $005 D14 Server Virtualization kW reduction $40000 D1 5 Thin Clients Units $500

efficient compared to the existing Mainframes power supply The replacement Mainframe if Inactive must be decommissioned and removed from the Data Center

Server Refresh Replacement servers must be ENERGY STARreg certified Replacement servers power supply must be 5 more efficiency compared to the power supply of the replaced servers The replaced server must be decommissioned and removed from the data center

HVAC System Optimization Final system must have these features

-Implementation of free cooling by the addition of an economizer system -Conversion of constant speed CRACCRAH into variable speed operations using VFDs and additional control functionalities and -Elevation of exhaust air temperature

HotCold Aisle Containment Includes both Hot and Cold Aisles Installing new containment measures not replacing already existed aisle containment Plenum-only installations not eligible Must result in higher difference between the return air (hot aisle) and supply air (cold aisle) temperatures measured at rack intake and exhaust locations

Server Virtualization Minimum of consolidating 5 Servers virtualized into one Server The virtualized servers if inactive are removed from the Data Center

Thin Clients Must be ENERGY STAR certified thin clients Decommissioned clients are removed from the Data Center

Data Center Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 43

Whole Building Systems Whole Building Systems Approach

The Whole Building Systems approach is intended to encourage integrated energy efficient designs by providing enhanced incentives to the customer who addresses overall energy performance Owners of eligible and qualifying new construction and major renovation projects can receive Whole Building Systems incentives when energy modeling indicates the projectrsquos performance is over 10 better than the ASHRAE 901-2007 Savings from eligible electric end-uses in kilowatt hours define the amount of financial incentive Energy savings achieved through renewable energy sources are not counted toward project energy savings and are not included in the savings basis Incentive reservations obtained during the design phase of a project will be honored for up to 24 months

How to Apply for Whole Building Systems Incentives Before construction begins bull A Pre-notification Application must be submitted documenting the Owners intention to

seek Whole Building Systems incentives bull The Owner must confirm the goals and energy efficiency strategies being pursued by the

design team on the completed Pre-notification Worksheet (Checklist tab) and in the project Summary (Whole Building Performance Summary tab)

bull Submit executable building modeling software files bull Submit the Whole Building Performance Summary worksheet energy simulation model

inputs and outputs and supporting documentation bull Receive confirmation and eligibility notification from the PECO Smart Ideas team and

receive an incentive reservation bull The final incentive paid may differ from the reserved incentive amount The final

incentive will be calculated based on site-verified equipment installation and performance The Owners final application and complete documentation must be received within 6 months of equipment installation or certificate of occupancy whichever is later

bull An executable energy model and model output demonstrating compliance with the criteria of ASHRAE 901-2007 Appendix G will be required and the equipment data sheets LED lighting fixtures must be on the DLC or Energy STAR qualified products list (QPL) to be eligible LED fixtures not on the DLC or Energy STAR QPL has the option of submitting LM79 and LM80 test reports for evaluation against DLC and Energy STAR eligibility criteria

During the construction period bull Owner and design team continue to work closely with their chosen contractor to assure

energy efficiency measures are included and installed in the completed building

When the building is constructed and operational bull Complete the Owner final application Request an equipment verification site visit by the

PECO Smart Ideas team Equipment must be installed and fully operational o Program staff will schedule a site visit and utilize submitted documentation and

measurement tools to verify that the installation follows the submitted energy simulation model

bull When PECO confirms that there are no significant changes to the installed equipment payment of the reserved incentive will be made to the Owner within 6 weeks

bull If changes from the proposed design energy simulation are found the Owner and design team will be notified of the reduced incentive amount a period of 20 calendar days will

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 44

Improvement Incentive per Sq Ft

over Code

~11 to lt20 $0155

~20 to lt30 $0233

~30 to lt40 $0350

~40 to lt60 $0525

~60 $0700

be allowed for supplemental information to be provided if no additional information is received by PECO Smart Ideas team the reduced incentive payments will be made and sent to the Owner if additional clarification and information is available program staff will work diligently to resolve the discrepancies and arrive at a reasonable incentive adjustment with the customer

Payments made by PECO Smart Ideas are final

Customer Eligibility The Owner of the proposed new building project must be a customer of PECO and receive delivery of electric service from PECO to receive kilowatt-hour based incentives Please note that electricity supply can be provided by any vendor

Project Eligibility bull The project must be a new construction or major renovation Major renovations involving

the removal and redesign of at least two building systems (such as interior lighting and mechanical systems) may apply for Whole Building Systems incentives

bull To qualify for incentives projects must demonstrate energy efficiency enhancements that achieve at least 11 improvement in the proposed design versus the standard baseline

bull The Owner must submit a Pre-approval Application to the program at the stage where changes for increased energy efficiency are still feasible and construction has not been completed

bull Projects receiving Whole Building Systems incentives are not eligible to receive other incentives such as the prescriptive or custom program incentives for the same scope

bull Project components that are NOT eligible for consideration as a basis for PECO Smart Ideas include the following o Alternative fuel sources (eg use of gas or oil equipment in lieu of electric) Please note

that combined heat and power (CHP) systems will be incentivized for the electricity they produce

o Renewable energy sources (eg solar wind biomass) bull Ineligible savings include exterior lighting process receptacle miscellaneous loads and

other unregulated end-uses Custom incentives are available for new construction exterior lighting

Whole Building Systems Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 45

Custom Project Specifications Instructions for Energy Savings Calculations for Custom Projects Custom projects must involve measures that result in a reduction in electric energy use (kWh) Electricity savings may result from either efficiency improvements or fuel switching Custom Incentives are based on the first year kilowatt-hour savings Custom applications must be accompanied by detailed engineering calculations that document the annual total energy savings

The following serve as guidelines for the minimum required documentation

Equipment Information Submittals bull A list of the present and proposed equipment and components to be installed

including manufacturerrsquos catalogmodel number bull Manufacturerrsquos specification sheets showing capacities and performance for all major

components

Energy Savings Calculations Provide calculations documenting the predicted energy consumption of the existing (or baseline) and proposed system using appropriate analytical tools and clearly stated assumptions Calculations may be performed by ldquohandrdquo but spreadsheet analysis or more rigorous modeling is preferred All analysis should be provided in electronic format All assumptions such as operating hours existing and proposed equipment operational details must be presented Engineering algorithms and procedures from recognized technical organizations such as ASHRAE SMACNA ANSI etc must be used Use rated performance factors tested under accepted procedures specified by recognized rating agencies such as AHRI ANSI ASTM etc Provide an explanation when equipment performance rating conditions vary from standard conditions

In support of the calculations extensive documentation must be provided that provides the basis for the savings estimates The documentation must provide information on the equipment operating schedule daily and seasonal load profile and baseline AND energy efficient equipment performance at the operating loads Typical documentation for custom projects often includes bull Engineering or architectural drawings and ldquoequipment schedulerdquo sheets bull Component specification sheets that include part load efficiency or performance

factors bull Spreadsheet calculations or inputoutput files and results from system modeling or

other engineering analysis using accepted engineering algorithms and practices bull Log sheets trend logs from a building management system or other operating

documentation that are often necessary to document operating hours and equipment loading and used as a basis for the calculations (in some cases short term monitoring may be required to document the load profile)

bull Control sequence of operations that are necessary where controls play a part in the savings equation

Additional documentation other than that described in the application may be required for program participation Larger projects may also require pre- and post-project sub metering or monitoring of loads andor power input as part of another measurement and verification activity to demonstrate the actual energy savings that are realized

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 46

Baseline for Custom Analysis Where equipment is replaced prior to the end of its rated service life in order to achieve energy savings the existing equipment performance may be used as the baseline in the energy savings calculations Where equipment is replaced due to failure or for other reasons (such as obsolescence or a need for more capacity) the baseline performance used in the savings calculation should be either the minimum performance that would be required by code for that equipment type and application (where a code applies) or the performance of the equipment that would have been selected as the customers standard practice when a code does not apply

Baseline or Existing System Summary On custom worksheet on application form include make model number name plate information (such as operating voltage and rated full load amps) rated capacity quantities equipment condition and age facility operating hours equipment operating schedule and load curves If needed attach separate sheets

All decisions regarding incentives for custom projects are in the sole discretion of PECO

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 47

APPENDIX PROGRAM UPDATES SUMMARY (Q1 2017) Multifamily Nursing Home and Assisted Living retrofit customers need to apply for incentives through the PECO Smart Ideas Multi-Family Program administered by Franklin Energy For more information please contact Taylor Adler at tadlerfranklinenergycom or call 1-844-4BIZ-SAVE Multifamily Nursing Home and Assisted Living new construction customers can proceed with applying for incentives here

Revised Incentives

Data Centers

Measure Incentive Effective Immediately Previous Incentive

Air-cooled chiller for data centers $40ton $10ton Air-cooled chiller without condenser for data centers $20ton $10ton

Computer room air conditioner $30ton $7ton Water-cooled centrifugal chiller for data centers $30ton $5ton Water-cooled positive displacement or reciprocating chiller for data centers

$30ton $5ton

Uninterruptible power supply 20-100 kVA $10kVA $6kVA Uninterruptible power supply gt100 kVA $10kVA $1kVA Mainframe refresh $20kW installed $5kW installed Server refresh $20kW installed $4kW installed Server virtualization $400kW reduction $4kW reduction Thin clients $5units $4units

Lighting (Effective Immediately)

Measure Incentive Effective Immediately Specification Previous

Incentive Specification

New construction exterior LED outdoor flood light LED parking garage and canopy lighting LED polearm mounted parking and roadway lighting LED wall mount fixture

$005kWh (custom)

Lighting Power Density (LPD) Requirements Unchanged

$10-54 fixture

Lighting Power Density (LPD) (Wft2) by Space Type or Building Area

LED Replacement Lamps (Tubes) 2

$250lamp 5 Min Watts Reduced

$250lamp 6 Min Watts Reduced

LED Replacement Lamps (Tubes) 4

$400lamp 10 Min Watts Reduced

$400lamp 12 Min Watts Reduced

Permanent Fixture Removal $010Watt removed

Clarification of calculation to represent actual Wattage removed

$010Watt removed

Lighting (Effective 6117)

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 48

Measure Incentive Effective 6117 Specification Previous

Incentive Previous Specification

Interior LED high-bay fixtures andor retrofit kits if lt 20000 LED Lumens

$50fixture 150 Min Watts Reduced

$75fixture 150 Min Watts Reduced

Interior LED high-bay fixtures andor retrofit kits if gt 20000 LED Lumens

$75fixture 225 Min Watts Reduced

$75fixture 150 Min Watts Reduced

New Incentives

Compressed Air

Measure New Incentive Effective Immediately Variable speed air compressor $30compressor HP Compressed air system optimization $50compressor HP

HVAC

Measure New Incentive Effective Immediately ECM circulation pump $50pump Retro-commissioning cooling systems $750ton Retro-commissioning whole building $010square foot Energy management system $25ton Demand controlled ventilation $25ton Water-cooled air conditioner $22ton

Food Service

Measure New Incentive Effective Immediately Combination oven $200unit ENERGY STARreg commercial convection oven $150unit ENERGY STARreg commercial fryers $100unit ENERGY STARreg commercial hot holding cabinet $200unit

Refrigeration

Measure New Incentive Effective Immediately Air-cooled refrigeration condenser $10ton Oversized condenser with VFD $10ton Case light occupancy controls $750door

Lighting

Measure New Incentive Effective Immediately Interior central lighting controls $00175sq foot

Motors and Drives

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 49

-

Measure New Incentive Effective Immediately VFD for dust collection system motor $50HP

Application Clarifications and Revised Requirements

Clarification of LED Eligibility for New Construction or Retrofit Projects

LED Eligibility is determined by whether lighting products are listed in either the DesignLights Consortium (DLC) Qualified Products List of commercial-grade LED luminaires or the US Environmental Protection Agency database of ENERGY STAR certified products For products not yet listed contractors may submit LM79 and LM80 test reports PECO Smart Ideas engineers will review test reports to determine if the product in question meets performance specifications

Revised W 9 Requirement

W-9 forms EIN numbers are no longer required

Deletion of erroneous statement in New Construction Lighting

The following statement from previous Business Manual has been deleted ldquoThe minimum lighting power density used to calculate the incentive shall be no lower than 50 of the ASHRAE 901-2007 valuerdquo

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 50

  • Commercial amp Industrial Program Application Manual
    • Follow This Easy Process
      • Pre-Approval Application Checklist
      • Final Application Checklist
          • Terms and Conditions
            • Program Effective Dates
            • Program and Project Eligibility
            • Incentive Payment Limits
            • Application Review Process
            • Inspections andor PUCrsquos Statewide Program Evaluation
            • Requirements for Custom Project Electricity Savings Calculation
            • Tax Liability
            • No Endorsement
            • Warranties
            • Limitation of Liability
            • Assignment
            • Customerrsquos Certification
            • Termination
            • Acknowledgement
              • Retrofit Lighting Solutions
                • General Linear Fluorescent Lamp and Ballast Specification Requirements
                • LED Lamps and Fixtures
                • Minimum Watts Reduced
                • Linear LED (Tubes)
                • Permanent Fixture Removal
                  • LED Traffic Signals
                    • LED Traffic Signals Incentive Table
                      • New Construction Lighting Specifications
                        • New Construction Lighting Incentives Table
                          • New Construction Lighting Power Density Code
                              • Exterior New Construction Lighting
                              • HVAC Equipment
                                • Air-Source Air Conditioners and Air-Source Heat Pumps
                                • Package Terminal Systems (Replacements)
                                • Ductless Mini-Split Heat Pump lt54 Tons
                                • Geothermal Heat Pump
                                  • Other HVAC Equipment
                                    • Hotel Guest Room Occupancy Sensor
                                    • ECM Circulation Fan
                                    • ECM Circulation Pump
                                    • Retrocomissioning Cooling Systems
                                    • Retrocomissioning Whole Building
                                    • Energy Management System
                                    • Demand Controlled Ventilation
                                    • Other HVAC Incentives Table
                                      • Unitary HVAC Chillers
                                        • Air-Cooled Chillers Water Cooled Positive Displacement Reciprocating Chillers and Water Cooled Centrifugal Chillers
                                          • Refrigeration
                                            • Anti-Sweat Heater Controls
                                            • Evaporator Fan Controls
                                            • Floating Head Pressure Controls
                                            • Automatic Door Closers for Walk-In Coolers and Freezers
                                            • EC Motor for Walk-inReach-in Refrigerated cases or Freezer cases
                                            • ENERGY STAR Solid Door Freezer and Glass Door Freezer and Refrigerators
                                            • Refrigeration Suction Pipe Insulation
                                            • Night Cover
                                            • Strip Curtain on Walk-In CoolerFreezer
                                            • Evaporator Coil Defrost Control
                                            • Variable Speed Refrigeration Compressor
                                            • Add Doors to Open Refrigerated Cases
                                            • Door Gaskets
                                            • Zero Energy Doors
                                            • Air Cooled Refrigeration Condenser
                                            • Oversized Condenser with VFD
                                            • Case Light Occupancy Controls
                                            • LED Open Case Lighting
                                            • LED Enclosed Case Lighting Refrigerated
                                            • LED Enclosed Case Lighting Freezer
                                              • Food Service
                                                • Beverage and Snack Machine Controls
                                                • ENERGY STARreg Refrigerated Beverage Vending Machines
                                                • ENERGY STARreg Electric Steam Cooker
                                                • ENERGY STARreg Electric Combination Oven
                                                • ENERGY STARreg Commercial Convection Oven
                                                • ENERGY STARreg Commercial Fryers
                                                • ENERGY STARreg Commercial Hot Holding Cabinet
                                                  • Motors and Variable Frequency Drives
                                                    • Early Replacement Motors
                                                    • Variable Frequency Drives on HVAC Fan Applications
                                                    • Variable Frequency Drives on Pump Applications
                                                    • Variable Speed Control for Kitchen Exhaust Hoods
                                                    • Variable Speed Drives for Process or Other Equipment
                                                      • Domestic Hot Water
                                                        • Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater
                                                        • Heat Pump Water Heater
                                                        • Low Flow Pre-Rinse Spray Valve
                                                        • Domestic Hot Water Incentive Table
                                                          • Compressed Air Systems
                                                            • No-loss Condensate Drain
                                                            • Air-Entraining air nozzle
                                                            • Storage Tanks for LoadNo Load Screw Compressors
                                                            • Cycling Refrigerated Thermal Mass Dryer
                                                            • Variable Speed Air Compressor
                                                            • Compressed Air System Optimization
                                                            • Compressed Air Systems Incentive Table
                                                              • Data Centers
                                                                • Air Cooled Chiller
                                                                • Air Cooled Chiller without Condenser
                                                                • Computer Room Air Conditioner
                                                                • Computer Room Air Handler Variable Speed
                                                                  • Replacing constant speed CRAH with VSD CRAH
                                                                    • Water Cooled Centrifugal Chiller
                                                                    • Water Cooled Positive Displacement or Reciprocating Chiller
                                                                    • Uninterruptible Power Supply
                                                                    • Mainframe Refresh
                                                                    • Server Refresh
                                                                      • Whole Building Systems
                                                                        • Whole Building Systems Approach
                                                                        • How to Apply for Whole Building Systems Incentives
                                                                        • Customer Eligibility
                                                                        • Project Eligibility
                                                                        • Whole Building Systems Incentives Table
                                                                          • Custom Project Specifications
                                                                            • Instructions for Energy Savings Calculations for Custom Projects
                                                                            • Equipment Information Submittals
                                                                            • Energy Savings Calculations
                                                                            • Baseline for Custom Analysis
                                                                            • Baseline or Existing System Summary

PECO Smart Ideas for Your Business

Commercial amp Industrial Program Application Manual

Program is offered and incentive values and measures contained in this application are valid from June 1 2016 to May 31 2021 or until funds are exhausted

Incentive values and measures may be modified or terminated at any time without prior notice

Follow This Easy Process

Step 1 Verify your Eligibility Applicant must verify that they are a business customer of PECO (commercial industrial

governmental institutional and non-profit) Multifamily applicants may also apply Detailed information is posted on wwwpecocomsmartideas

Project must be a new facility improvement that results in an improvement in electric energy efficiency (kWh) andor a permanent reduction in electric energy usage

All equipment must be installed in facilities served by PECO with a valid PECO account number on an eligible PECO non-residential rate

Refer to the technical specifications in this Application Manual to check eligibility of equipment for incentives

Step 2 Submit Pre-approval Application to Reserve Funds

A pre-approval application must be submitted before you purchase equipment or technology for which the incentive is being requested Applications can be submitted via online mail email or fax

Email pecosmartideasdnvglcom

Mail PECO Smart Ideas for Your Business

4377 County Line Road Chalfont PA 18914

Fax

215-996-3982

Incentive funds will be reserved when your prendashapproval application is approved Complete the Applicant Information form for each of the measures that you are installing

Lighting projects require a lighting worksheet and inventory to be completed in addition to the application form You may submit the application via mail fax or e-mail

For some projects a pre-installation inspection will be required Most projects require documentation of the equipment being replaced

Incentive funds are reserved for 90 days Contact the PECO Smart Ideas team for specific questions regarding funding reservations and extensions

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 5

Step 3 Install Equipment or Perform Project Work The equipment installed must meet or exceed the specifications and requirements found

in measures tables and detailed in the Application Manual Equipment must be installed within the program period

Step 4 Submit Final Application Submit a final application as soon as possible after the project is completed within 90 days of

project completion but no later than May 15 2021 The final application is the same form as the pre-approval application Include the following documentation with your final application customercontractor information a signed final application agreement itemized invoices specifications and an updated scope of work

The program team will review your final application For some projects a final inspection will be part of the final review

The program team will send incentive checks four to six weeks after your final application is approved

If you need assistance please contact our program hotline 866-371-9343

Please visit our website wwwpecocomsmartideas

Pre-Approval Application Checklist Final Application Checklist

Registration Number on Application Signed Final Agreement Form (if applicable) Itemized Invoices

Documentation of existing equipment for Equipment SpecificationsCut Sheets for retrofit projects changes in equipment

Lighting worksheet for lighting projects Certificate of Occupancy (for New Equipment SpecificationsCut Sheets Construction projects only)

Updated Scope if project changed (please Copy of Current PECO Bill advise program staff during installation if Customer Signature on Customer

Acknowledgement scope changes Increase in incentive amount is not guaranteed)

Supporting Documentation Guidelines

Lighting Please attempt to submit photos of existing lighting Projects gt750000 kWh require lighting logging data DLCENERGY STAR certification documentation submittal will streamline review process Plansengineering submittals will be requested for large projects Square footage for centrally-controlled lighting control systems may be required

VFDs Nameplate photos andor engineering schedules of existing motors

Custom or lsquolargersquo (gt250000 KWh) mechanical projects MampV plan will be required for larger projects Program engineers will contact participants to establish MampV protocols

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 6

Terms and Conditions

PECO Energy Company (PECO) is offering prescriptive and custom incentives under the PECO Smart Ideas for Your Business to facilitate the implementation of cost-effective energy efficiency measures for commercial and industrial customers Any and all energy savings or environmental credits generated by the project described in this application will be retained by PECO

Funds are limited and subject to availability The program may be modified or terminated without prior notice

Program Effective Dates

The program is available until May 31 2021 The current cycle year runs from June 1 2016 through May 31 2017 (lsquoProgram Year Eightrsquo) Incentives are offered until approved funds are exhausted or until May 15 2021 whichever comes first All projects must be completed and the final applications received no later than May 15 2021 to be eligible for incentives

Program and Project Eligibility

Smart Ideas for Your Business incentives are available for the common energy efficiency measures listed in this Application Manual Program incentives are available under PECO Smart Ideas for Your Business to non-residential customers within PECOs service territory These incentives are available to all customers who pay into the Energy Efficiency Charge and receive their electricity over PECOrsquos distribution network regardless of the retail electric supplier

Most commercial projects involving energy savings are eligible Incentives are available for both prescriptive and custom measures Prescriptive measures are energy efficiency measures with pre-determined savings and incentive levels and are paid on a per unit basis These measures are available for specific Lighting HVAC Refrigeration and Food Service Variable SpeedFrequency Drives Compressed Air and Domestic Water Heater measures Custom measures include energy efficiency measures not listed on the prescriptive application forms Custom incentives must be approved by PECO in advance are determined on a case-by-case basis and are paid per unit of energy (kWh) saved Examples of projects that are NOT eligible for PECO Smart Ideas for Your Business include onndashsite electricity generation projects focused primarily on power factor improvement and renewable energy projects

Installation must be at the customerrsquos facility and provide 100 of the energy benefits as stated in the application for a period of five years or for the life of the product whichever is less PECO has the right to claim a pro-rated amount of any incentive paid if the customer ceases to be a distribution customer of PECO or removes the equipment or systems at any time during the five-year period or the life of the measure

Incentive Payment Limits

Prescriptive and custom incentives cannot exceed 100 of the customerrsquos total costs Contractor labor costs can be considered in the total project cost while customer internal labor costs cannot

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 7

Application Review Process

Pre-approval is required for all projects A pre-approval application must be submitted before you purchase equipment or technology for which the incentive is being requested Pre-approval is not a guarantee of program acceptance Completed applications will be reviewed in the order received The location or business name on the invoice must be the same as the application information The incentive is reserved for the project when PECO receives a complete preshyapproval application and determines that the project meets the program eligibility requirements Applicants who submit incomplete applications will be notified of deficiencies upon review of the application and could lose their place in line in the review process until all requested information is received Applicants are encouraged to call the program hotline if they have any questions about documentation requirements

PECO will review final applications for eligibility and completeness The final application and all required supporting documentation must be received within 90 days of project completion but no later than May 15 2021 to be eligible for incentives Project documentation including original dated invoices for the purchase and installation of the measures andor product specification sheets is required

The project invoice must provide sufficient detail to separate the project cost from the cost of other services such as repairs and building code compliance PECO reserves the right to request additional supporting documentation necessary to ensure measure eligibility and verify that the expected energy savings will occur Requested information may include but is not limited to equipment purchase dates installation dates proof that the equipment is operational manufacturer specifications warranty information and proof of customer co-payment PECO will make every effort to maintain the confidentiality of customer information except that such information must be provided to the PA PUC and its contractor as well as PECOrsquos contractor for measurement and evaluation

The installed measures are not eligible for incentives from other PA Act 129 Phase 3 Energy Efficiency Programs

Inspections andor PUCrsquos Statewide Program Evaluation

PECO its agents measurement and verification contractor andor the PUC statewide program evaluator have the right to audit or inspect all projects to verify compliance with the program rules and verify the accuracy of project documentation This may include pre-installation andor post-installation inspections detailed lighting layout descriptions metering data collection interviews and utility bill data analyses The customer must allow access to project documents and the facility where the measures were installed for a period of five years after receipt of incentive payment by PECO

Requirements for Custom Project Electricity Savings Calculation

The annual electricity savings must be calculated for custom projects using industry accepted engineering algorithms or simulation models The applicant must estimate the annual electricity usage of both the existing and proposed equipment based on the current operation of the facility If the existing equipment is at the end of its rated useful life the applicant must substitute equipment that would meet the applicable federal and local energy codes as the baseline when calculating the annual energy savings The applicant must be able to clearly describe the method used to calculate the savings The applicant must provide all assumptions used in the calculations and document the source for these assumptions Further information on custom measures can be found in the Application Manual which can be downloaded from

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 8

wwwpecocomsmartideasThe method and assumptions used by the applicant to calculate the annual savings will be reviewed by PECO PECO has sole and final determination of the annual energy savings to be used in calculating the incentive amount PECO also reserves the right to require specific measurement and verification activities including monitoring both before and after the retrofit and to base the incentive payment on the results of these activities

PECO may need to conduct inspections both before and after the retrofit projects to verify equipment and operation conditions Pre-approval application must be submitted while the existing equipment is still in operation in order to allow PECO the opportunity to view the existing equipment

Tax Liability

Incentives may be taxable for most taxpayers If the incentive is more than $600 it will be reported to the IRS and the customer will be provided with an IRS form 1099 unless the customer is exempt PECO is not responsible for any tax liability that may be imposed on any customer as a result of the payment of program incentives All customers must supply their Federal Tax Identification number to PECO in order to receive a Program Incentive Please consult with your tax professional for information on the tax treatment of the incentives

No Endorsement

PECO does not endorse support or recommend any particular manufacturer product or system design in promoting this program and PECO does not guarantee any specific level of energy savings with respect to any product system design or energy efficiency measure

Warranties

PECO DOES NOT WARRANT THE PERFORMANCE OF INSTALLED EQUIPMENT ANDOR SERVICES RENDERED AS PART OF THIS PROGRAM EITHER EXPRESSLY OR IMPLICITLY NO WARRANTIES OR REPRESENTATIONS OF ANY KIND WHETHER STATUTORY EXPRESSEDOR IMPLIED INCLUDING WITHOUT LIMITATIONS WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE REGARDING EQUIPMENT OR SERVICES PROVIDED BY A MANUFACTURER OR VENDOR CONTACT YOUR VENDORSERVICES PROVIDER FOR DETAILS REGARDING PERFORMANCE AND WARRANTIES

Limitation of Liability

By virtue of participating in this program customers agree to waive any and all claims or damages against PECO except the receipt of the program incentive if eligible Participating Customers agree that PECOrsquos liability in connection with this program is limited to paying the program incentive specified Under no circumstances shall PECO its representatives agents or subcontractors be liable for any lost profits special punitive consequential or incidental damages or for any other damages or claims connected with or resulting from participation in this program

Assignment

Customers may assign a portion or all of their program incentive payment to a specified vendor

Customerrsquos Certification Customer certifies that heshe purchased and installed the equipment listed in the application Customer agrees that all information is true and that heshe has conformed to all of the program and equipment requirements listed in the application

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 9

Termination

PECO reserves the right to extend modify (this includes modification of program incentive levels) or terminate this program without prior or further notice

Acknowledgement

I have read understood and am in compliance with all rules and regulations concerning this incentive program I certify that all information provided is correct to the best of my knowledge and I give PECO permission to share my records with the Pennsylvania PUC and agents representatives and contractors it selects to manage coordinate or evaluate the program Additionally I hereby authorize PECO to have reasonable access to my property to inspect the installation and performance of the equipment and installations that are eligible for incentives under the guidelines of the program

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 10

Retrofit Lighting Solutions

General Linear Fluorescent Lamp and Ballast Specification Requirements 32w 4ft HPT8 and reduced wattage T8 lamps must be listed on the Consortium of Energy Efficiency (CEE) product list or must meet CEE standards For further information visit wwwcee1org

LED Lamps and Fixtures The integral lamp or fixture must appear on the Energy Star Qualified Products List or the Design Lights Consortium Qualified Products List

bull Energy Star Qualified Fixture Product List httpwwwenergystargov bull Energy Star Qualified Integral LED lamps httpwwwenergystargov bull Design Lights Qualified Product List httpwwwdesignlightsorg

Minimum Watts Reduced Energy efficient fixtureslamps are required to be lower in load than existing fixtureslamps by specified levels the Minimum Watts Reduced Each lighting measure has its own Minimum Watts Reduced that must be met as eligibility requirement These levels are listed in the lighting worksheet ldquoLighting Incentives Tablersquo tab and reproduced below

Linear LED (Tubes) Linear LED lamps must be listed on the Design LightsTM Consortium (DLC) Qualified Products List

Type A LEDs bull Type A LED linear lamps are powered by a fluorescent ballast bull If present existing magnetic ballast must be removed and replaced with a compatible energy- efficient electronic ballast bull DLC Primary Use Requirement ndash DLC-listed equipment must be classified with one of the following Primary Use designations

o Replacement Lamps (Plug and Play) (UL Type A) bull Label must be affixed to the interior of fixture in a prominent location Label should indicate that the fixture has been retrofitted with

TLEDs and that fluorescent lamps should not be installed as replacements

Type B LEDs bull Type B LED tubes are powered by an internal driver bull Existing fluorescent ballast must be removed and fixturersquos incoming power wires are connected directly to the lamp sockets Strict

adherence to installation instructions is critical when rewiring existing fixtures

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 11

bull The LED linear lamps must be delivered as part of a UL 1598C Classified Luminaire Retrofit Kit with instructions explaining the LED linear lamps must be installed on a luminaire that is already UL Listed

bull The retrofitted luminaire must be clearly identified using the label included with the Retrofit Kit indicating that the luminaire has been modified and can no longer operate the originally intended fluorescent lamp(s)

Type C LEDs

bull Type C LED linear lamps are powered by an external driver bull Existing fluorescent ballast must be removed and replaced with a compatible external driver bull DLC Primary Use Requirement ndash DLC-listed equipment must be classified with one of the following Primary Use designations

o 2-lamp External Driver Lamp-Style Retrofit Kits (UL Type C) o 3-lamp External Driver Style Retrofit Kits (UL Type C) o 4-lamp External Driver Lamp-Style Retrofit Kits (UL Type C)

bull Technical specifications (manufacturerrsquos cut sheet) for the driver must be submitted with the application

Permanent Fixture Removal This measure is to be used only in conjunction with lighting retrofits and is intended for spaces that are currently over lit Incentives are paid $010watt reduced only on fixtures removed not on total watts reduced for entire projects Overall net lumen reduction must be achieved in order to qualify for a permanent fixture removal incentive

Example

(20) Existing fixtures at 10000 lumens each = 200000 lumens

(14) Proposed fixtures at 15000 lumens each = 210000 lumens

Since there is not a net reduction in lumens the six fixtures removed would not be eligible for a permanent fixture removal incentive

It is encouraged that spaces meet recommended foot-candle levels as detailed by IESNA Lighting Design Guide A Program Engineer will evaluate lumens reduction based on the type of fixtures removed and the DLC lumens rating of the fixtures installed

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 12

RETROFIT INTERIOR LIGHTING TABLE

Measure Code

Min Measure Name Watts Incentive Unit

Reduced Technical Specifications

CFL Lighting

CFL1A ENERGY STAR Hard-Wired CFL fixture Indoor AccentTrack 20 $250 lamp

Only complete new fixtures or modular hardwired retrofits with hardwired electronic ballasts qualify

CFL ballast must be programmed start or programmed rapid start with a power factor (PF) ge 090 and a total

harmonic distortion (THD) le 20 Screw-in CFLs are not eligible for this incentive

CFL1B ENERGY STAR Hard-Wired CFL fixture Indoor Directional WallCeiling Mount 20 $250 lamp

CFL1C ENERGY STAR Hard-Wired CFL fixture Indoor Omni-Directional WallCeiling Mount 20 $250 lamp

CFL2A ENERGY STAR Hard-Wired CFL fixture Indoor Portable LampTorchiere 20 $1 lamp

CFL2B ENERGY STAR Hard-Wired CFL fixture Indoor Recessed Downlight 20 $1 lamp

CFL2C ENERGY STAR Hard-Wired CFL fixture Indoor Recessed Downlight Retrofit Module 20 $1 lamp

CFL2D ENERGY STAR Hard-Wired CFL fixture Indoor Under CabinetStrip 20 $1 lamp

CFL3A ENERGY STAR Hard-Wired CFL fixture Outdoor Directional WallCeilingGroundPole Mount 30 $3 lamp

CFL3B ENERGY STAR Hard-Wired CFL fixture Outdoor Omni-Directional WallCeilingGroundPole Mount 30 $3 lamp

CFL3C ENERGY STAR Hard-Wired CFL fixture Outdoor Recessed Downlight 30 $3 lamp

CFL3D ENERGY STAR Hard-Wired CFL fixture Outdoor Recessed Downlight Retrofit Module 30 $3 lamp

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 13

Fluorescent Lighting FL1 Interior T5 New Fluorescent Fixture w Electronic Ballast 11 $5 fixture Any T5 is eligible

FL2 T5HO High-Bay Fixture 54 $25 fixture Fixture efficiency must be gt 90

High bay fixtures must be installed at least 15ft above finished floor

FL3 HPT8 High-Bay Fixture 82 $20 fixture Must use High Ballast Factor (gt96) Fixture efficiency must be gt= 85

High bay fixtures must be installed at least 15ft above finished floor

FL4 HPT8 Fixture 20 $5 fixture Must use Low Ballast Factor (lt80)

FL5 RW T8 Lamp - Lamp only 10 $3 lamp Existing T8 fixture re-ballasting to a higher ballast factor are not eligible

HID Measures HID1 Ceramic HID - 25 -39 Watt 95 $13 fixture

Replacing higher wattage HID or High Pressure Sodium or Mercury Vapor

Interior replacements only

HID2 Ceramic HID - 70 Watt 155 $13 fixture HID3 Ceramic HID - 100 Watt 170 $15 fixture HID4 Pulse Start HID - 150 nominal Watts 72 $10 fixture HID5 Pulse Start HID - 350 nominal Watts 100 $13 fixture

HID6 Pulse Start HID - 1000 nominal Watts 400 $15 fixture

Interior LED Fixtures

LED1 ENERGY STAR Integral LED fixture Indoor Recessed Downlight Retrofit Module 38 $7 fixture Retrofit module of existing recessed fixture

LED2 ENERGY STAR Integral LED fixture Indoor Recessed Downlight 38 $7 fixture

New indoor recessed downlight fixture LED3 ENERGY STAR Integral LED fixture Indoor Portable LampTorchiere 30 $7 fixture

LED4 LED AccentTrack Lighting Fixtures 32 $6 head

LED5 LED Low-Bay Fixtures 150 $20 fixture For replacement of HID fixtures mounted le 15 above finished floor

LED6 LED Low-Bay Retrofit Kits 150 $20 fixture

LED8 LED Troffer Fixtures and Retrofit Kits 5 $10 fixture Troffers typically installed in lay-in ceilings 2x2 2x4 configuration

LED9 LED Surface and Suspended Linear Fixtures 25 $10 fixture Examples of LED surface-mounted luminaires include wrap vapor tight and strip fixtures (non-cooler)

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 14

-

Interior LED High Bay Fixtures

LED10A LED High-Bay Fixtures le 20000 LED lumens 150 $50 fixture

High bay fixtures must be installed at least 15ft above finished floor

LED10B LED High-Bay Fixtures gt 20000 LED lumens 225 $75 fixture

LED11A LED High-Bay Retrofit Kits le 20000 LED lumens 150 $50 fixture

LED11B LED High-Bay Retrofit Kits gt20000 LED lumens 225 $75 fixture

LED Parking Garage and Canopy Fixtures

LED12 LED Parking Garage and Canopy Fixtures and Retrofit Kits Outdoor lt= 5000 LED lumens 50 $15 fixture

Fixtures must be physically installed in a parking garage (area where vehicles are physically parked) or

fuel pump canopy Typically represents replacement of le175 W Metal

Halide or equivalent

LED13 LED Parking Garage and Canopy Fixtures and Retrofit Kits Outdoor 5001 - 10000 LED lumens 70 $30 fixture

Typically represents replacement of Metal Halide or equivalent greater than 175W and less than 400W

Product must be installed in a parking garage (area where vehicles are physically parked) or fuel pump

canopy

LED14 LED Parking Garage and Canopy Fixtures and Retrofit Kits Outdoor gt 10000 LED lumens 150 $50 fixture

Typically represents replacement of ge400 W Metal Halide or equivalent

Product must be physically installed in a parking garage (area where vehicles are physically parked) or

fuel pump canopy LED Screw in Lamps

ESLED1 ENERGY STAR Screw-in LED Bulb (Decorative Globe) 14 $5 lamp Lamp with globe shape such as type G

ESLED2 ENERGY STAR Screw-in LED Bulb (Decorative non-globe 14 $5 lamp Lamps with non-globe or candle-like shape such as type B C CA F

ESLED3 ENERGY STAR Screw-in LED Bulb and Low Voltage Mini-Reflector Bulbs (DirectionalReflector) 14 $5 lamp ANSI standard PAR and MR type lamps

ESLED4 ENERGY STAR Screw-in LED Bulb (Standard) 14 $5 lamp Lamp such as A series

ESLED5 ENERGY STAR Screw-in LED Bulb (Standard 3-Way) 14 $5 lamp Lamp such as A series with three light levels

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 15

- -LED Screw in Lamps Smart Bulbs

ESLED6 ENERGY STAR Screw-in LED Bulb (Decorative Globe Smart Bulb) 14 $5 lamp Lamp with globe shape such as type G

ESLED7 ENERGY STAR Screw-in LED Bulb (Decorative non-globe Smart Bulb) 14 $5 lamp Lamps with non-globe or candle-like shape such as

type B C CA F

ESLED8 ENERGY STAR Screw-in LED Bulb (DirectionalReflector Smart Bulb) 14 $5 lamp ANSI standard PAR lamps

ESLED9 ENERGY STAR Screw-in LED Bulb (Standard Smart Bulb) 14 $5 lamp Lamp such as A series

LED Tubes (replacing fluorescent)

TLED1 LED Replacement Lamps (Tubes) 2 5 $250 lamp Refer to Lighting Technical Specifications for requirements DLC Type A B and C are eligible bullType B linear (Interior driver) LEDs have the following installation requirements

bullExisting fluorescent ballast must be removed and fixturersquos incoming power wires are connected directly to the lamp sockets Strict adherence to installation instructions is critical when rewiring existing fixtures bullThe LED linear lamps must be delivered as part of a UL 1598C Classified Luminaire Retrofit Kit with instructions explaining the LED linear lamps must be installed on a luminaire that is already UL Listed bullThe retrofitted luminaire must be clearly identified using the label included with the Retrofit Kit indicating that the luminaire has been modified and can no longer operate the originally intended fluorescent lamp(s)

TLED2 LED Replacement Lamps (Tubes) 4 10 $4 lamp

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 16

LED Exterior Lighting

ELED1 ENERGY STAR Integral LED fixture Outdoor Recessed Downlight Retrofit Module 24 $10 module

ENERGY STAR or DLC Qualified fixtures ELED2 ENERGY STAR Integral LED fixture Outdoor Recessed

Downlight 24 $10 fixture

ELED3 LED Outdoor Flood Light Fixtures lt= 5000 LED lumens 50 $10 fixture Typically represents replacement of le175 W Metal Halide or equivalent Fixtures must be DLC qualified

ELED4 LED Outdoor Flood Light Fixtures gt 5000 LED lumens 70 $15 fixture Typically represents replacement of Metal Halide or equivalent greater than 175W Fixtures must be DLC qualified

ELED5 LED PoleArm Mounted Parking and Roadway Fixtures and Retrofit Kits lt= 5000 LED lumens 50 $25 fixture Typically represents replacement of le175 W Metal

Halide or equivalent Product must be DLC qualified

ELED6 LED PoleArm Mounted Parking and Roadway Fixtures and Retrofit Kits Outdoor gt 10000 LED lumens 150 $75 fixture

Typically represents replacement of Metal Halide or equivalent greater than 400W Product must be DLC

listed

ELED7 LED PoleArm Mounted Parking and Roadway Fixtures and Retrofit Kits Outdoor 5001 - 10000 LED lumens 70 $50 fixture

Typically represents replacement of Metal Halide or equivalent greater than 175W and less than 400W

Product must be DLC listed

ELED8 LED Wall Mount Fixtures and Retrofit Kits Outdoor lt= 5000 LED lumens 50 $25 fixture Typically represents replacement of le175 W Metal

Halide or equivalent Product must be DLC qualified

ELED9 LED Wall Mount Fixtures and Retrofit Kits Outdoor gt 5000 LED lumens 70 $50 fixture

Typically represents replacement of Metal Halide or equivalent greater than 175W Product must be DLC

qualified Permanent Fixture Removal

PFRA Indoor Permanent Fixture Removal combined with lighting retrofit na $010 watt removed Incentive only valid when units = ldquofixturerdquo in this table

Incentive is only offered when net lumens are reduced PFRB Outdoor Permanent Fixture Removal combined with lighting retrofit na $010 watt removed

Other LED Lighting LEDEXIT LED Exit Sign

na

$2 sign Replacing Incandescent or Fluorescent

SIGN1A Indoor LED Channel Signage $8 letter

Replacing Neon SIGN1B Outdoor LED Channel Signage $8 letter

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 17

Lighting Controls

CTL Unitary Sensor Controls

na

$1500 sensor

Passive infrared ultrasonic detectors are eligible Includes daylighting controls and all occupancy controls

Controls can be onoff stepped or continuous (dimming) Daylight sensor controls are required to be commissioned in order to ensure proper sensor calibration and energy savings

Minimum of 30 watts controlled per control

CLC Interior Central Lighting Controls $00175

square foot of area

under control

Automated central lighting control systems with override capabilities

This measure includes centrally-controlled time clocks wireless on off switches bi level switches computer based

controls pre-set scene selection dimmable ballasts and on-off dimmer switches for non-personal tuning

Floor plan must be submitted verifying square footage

DAYOCC Controls Combination - Daylighting and Occupancy Fixture Mounted $1500 sensor Minimum of 30 watts controlled per control

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 18

LED Traffic SignalsThis measure applies to the early replacement of existing incandescent traffic lights and pedestrian signals with LEDs New LED traffic signals must comply with ENERGY STAR requirements which can be found at httpswwwenergystargoviapartnersproduct_specseligibilitytraffic_eligpdf98bfshy1786

LED Traffic Signals Incentive Table

Round Traffic Signals 8 Red

Incentive per Signal

$15

8 Yellow 8 Green 12 Red

12 Yellow 12 Green

Turn Arrow Signals

8 Red

$13

8 Yellow 8 Green 12 Red

12 Yellow 12 Green

Pedestrian Signals

9 Pedestrian Only

$13

12 Hand Only 12 Pedestrian Only 12 Countdown Only

12 Pedestrian and Hand Overlay 16 Pedestrian and Hand Side by

Side 16 Pedestrian and Hand Overlay

16 Hand and Countdown Side-by-Side

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 19

Lighting Controls that Exceed Code Requirements

New Construction Lighting SpecificationsUnder the Lighting Power Density Approach the lighting power installed is compared with the lighting power allowed by code Incentives are available for systems where the installed lighting power is lower than the code-allowed power by at least 10 Savings are based on the Lighting Power Density (LPD) calculated on a watts per square foot basis Incentives will be paid only on the area of the building where the lighting installation is complete and is ready for occupancy If a portion of a building is not built-out such that the lighting in an area is not complete and ready for occupancy then that portion is not eligible for an incentive Baseline lighting power density is based on ASHRAE 901- 2007 Either the Space-by-Space or Building Area method may be used to calculate the LPD for the purposes of the incentive

Required Documentation bull Lighting Worksheet bull COMcheck Interior Lighting Report or equivalent analysis demonstrating space-byshy

space or building area calculations bull Reflected ceiling plans and electrical plan sheets showing lighting fixture layout bull Lighting fixture schedule sheet including fixture counts bull Fixture submittal or specification sheets showing model number and rated fixture wattage bull Architectural floor plans displaying floor area affected by proposed lighting installation

New Construction Lighting Incentives Table Lighting Wattssq ft

Improvement over of Code Incentive

gt= 10 and lt 20 $0035sq gt= 20 and lt 30 $007sq ft gt= 30 and lt 40 $0105sq

gt= 40 $021 sq ft

Incentives will be paid on a ($005kWh) custom basis Please contact Program Staff for eligibility of lighting controls for New Construction projects

Interior Occupancy Sensors Incentives are offered for occupancy-based controls in areas where they are not required by code Passive infrared ultrasonic detectors and fixture-integrated sensors or sensors with a combination sensor are eligible All sensors must be hard-wired and control interior lighting fixtures The incentive is per Watt controlled An inventory of the controlled fixtures and their wattage must be provided for each sensor with the Final Application

Daylight Dimming System Incentives are offered for daylight sensor controls in spaces with suitable available ambient light for at least part of the day Light may be through skylights clerestories windows or ldquolight tubesrdquo The controls can be onoff stepped or continuous dimming The onoff controller should turn off artificial lighting when the interior illuminance meets the desired indoor lighting level The stepped controller generally dims the artificial lighting 50 when the interior illuminance levels reach 50 of the desired lighting levels Continuous or dimming controllers dim artificial lighting proportionally to the available ambient light All types of daylight sensor controls are required to be commissioned in order to ensure proper sensor calibration and energy savings

Required Documentation bull Cut sheets or submittals of lighting control systems Reflected ceiling plans or schedule

showing which fixtures are controlled by lighting controls

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 20

New Construction Lighting Power Density CodeRequirements ndash Space by Space Method

Building Specific Space Types LPD (Wft2) Building Specific Space Types LPD (Wft2)

GymnasiumExercise Center AutomotivemdashServiceRepair 07

Playing Area 14 Manufacturing

Exercise Area 09 Low (lt25 ft Floor to Ceiling Height) 12

CourthousePolice StationPenitentiary High (gt25 ft Floor to Ceiling Height) 17

Courtroom 19 Detailed Manufacturing 21

Confinement Cells 09 Equipment Room 12

Judges Chambers 13 Control Room 05

Fire Stations HotelMotel Guest Rooms 11 Fire Station Engine Room 08 DormitorymdashLiving Quarters 11

Sleeping Quarters 03 Museum

Post Office-Sorting Area 12 General Exhibition 10 Convention Center-Exhibit Space 13 Restoration 17

Library BankOfficemdashBanking Activity Area 15 Card File and Cataloging 11 Religious Buildings

Stacks 17 Worship Pulpit Choir 24

Reading Area 12 Fellowship Hall 09

Hospital Retail

Emergency 27 Sales Area [For accent lighting see 93121(c)] 17

Recovery 08 Mall Concourse 17

Nurse Station 10 Sports Arena

ExamTreatment 15 Ring Sports Area 27

Pharmacy 12 Court Sports Area 23

Patient Room 07 Indoor Playing Field Area 14

Operating Room 22 Warehouse

Nursery 06 Fine Material Storage 14

Medical Supply 14 MediumBulky Material Storage 09

Physical Therapy 09 Parking GaragemdashGarage Area 02

Radiology 04 Transportation

LaundrymdashWashing 06 AirportmdashConcourse 06

AirTrainBusmdashBaggage Area 10

TerminalmdashTicket Counter 15

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 21

New Construction Lighting Power Density CodeRequirements ndash Building Area Method

Building Area Type 221 LPD (Wft2)

Automotive facility 09

Convention center 12

Courthouse 12

Dining bar loungeleisure 13

Dining cafeteriafast food 14

Dining family 16

Dormitory 1

Exercise center 1

Gymnasium 11

Health-care clinic 1

Hospital 12

Hotel 1

Library 13

Manufacturing facility 13

Motel 1

Motion picture theater 12

Building Area Type LPD (Wft2)

Multifamily 07

Museum 11

Office 1

Parking garage 03

Penitentiary 1

Performing arts theater 16

Policefire station 1

Post office 11

Religious building 13

Retail 15

Schooluniversity 12

Sports arena 11

Town hall 11

Transportation 1

Warehouse 08

Workshop 14

221 In cases where both a common space type and a building specific type are listed the building specific space type shall apply

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 22

Exterior New Construction LightingExterior New Construction savings over code lighting power density will be incentivized using custom lighting measure at $005kWh rate Participants must submit exterior lighting plans Submittals COMCHECK REPORT and lighting schedule for exterior lighting Savings are calculated from the LPD (Wsq ft) indicated below Additional information may be required based on the building exterior type and space description indicated below To contribute to incentive LEDs must satisfy program requirements for DLC Energy Star or equivalent listing

Required Documentation bull COMcheck Interior Lighting Report or equivalent analysis demonstrating space-by-space or

building area calculations bull Drawings showing lighting fixture layout bull Lighting fixture schedule sheet including fixture counts bull Fixture submittal or specification sheets showing model number and rated fixture wattage

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 23

Building Exterior Space Description LPD

Unco erect Pariki Ilg Area Parlurng ots arnd Drives 0 15 WfW

B i ing Grournds W al 1Yays lless Hlan 11] e 10 Wltirneru- 00

W a Nays 10 middot de or greater 112 W

Plaza a reas

Spec rest re areas

Stainh1ays 1ow 2

B i ing 8ntrames and Exits Ma efilbies m wr near foot of door width

Other doors 2o w 1r ear foot of door width

Ctmqpies and Overhimgs Free starndillg and a ched tmd 12s w m2 m bullerhangs

0 door sales Op en areas (ind udi Ilg ve id e sales 05 W lo )

street frontage far vehicle sales lots 21] W linear toot in addi middot on to open are-0bullmiddot lo~nce

B i ing facades 0 2 W tfl2 middot or eacil illumirnated N311 or surface

o r 5 0 Wllinear root fo r eac h m n inated N3l1 o r

surface length

Automated te lle r rnachmiddot es a lld 210 W per loca tion plus 91] night deposito liies W 1pernddiliorml A I middot per

1oca middot om

Eirltrances and gatehouse inspecliion 125 W ffl2 o middot uncovered slatiaBS a goo~ ed acir ies area

Load ing are-0s or law enforcement 0 5 W 2 of u rnco1bullered area fire ambu rnce and otiher emergency service ibullehmiddotctes

Drive-through w indOWs a taslrood 400 W per drive-Hlrough restaurants

Parking near 24 -h our retail 80111 W per main entry entmn ces

HVAC Equipment Air-Source Air Conditioners and Air-Source Heat Pumps New unitary air conditioning units or air source heat pumps that meet or exceed the qualifying cooling efficiency shown in the HVAC Incentives Worksheet are eligible for an incentive They can be either split systems or single package units The efficiency of split systems is based on an ARI reference number All packaged and split system cooling equipment must meet Air Conditioning and Refrigeration Institute (ARI) standards (210240 320 or 340360) be UL listed use a minimum ozone-depleting refrigerant (eg HCFC or HFC) All required efficiencies are based on the Consortium for Energy Efficiency (CEE) high-efficiency commercial air conditioning and heat pump specifications (wwwcee1org) A manufacturerrsquos specification sheet indicating the system efficiency must accompany the application Disposal of the existing unit

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 24

must comply with local codes and ordinances

Package Terminal Systems (Replacements) Package terminal air conditioners and packaged terminal heat pumps are through-the-wall self-contained units that are 2 tons (24000 Btuh) or less All EER values must be rated at 95degF outdoor dry-bulb temperature

Ductless Mini-Split Heat Pump lt54 Tons Incentives are offered for Ductless Mini-Split Heat Pump lt54 Tons with SEER rating greater than or equal to 120 and EER greater than or equal to 145 and HSPF greater than or equal to 90

Geothermal Heat Pump Geothermal equipment is a high-efficiency groundwater source water source or ground source heat pump system that meets or exceeds the energy efficiency requirements shown in the tables below These measures do not apply to heat pump systems coupled with non-heat pump systems such as chillers rooftop AC units boilers or cooling towers which must be filed as custom measures All HVAC applications other than comfort cooling and heating such as process cooling must also be applied for as custom measures

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 25

HVAC Heating Qualifying Incentive

Equipment Type and Cooling Capacity Cooling Qualifying Efficiency ($ per cooling Measure Code Efficiency

ton)

Air Cooled Air Conditioner

H01 lt 54 tons (lt 65000 Btuhr) 15 SEER NA $22

H02 lt 54 and lt 11 25 tons

125 IEER $22 (lt 65 000 Btuh and lt 135 000 Btuhr) NA

H03 lt11 25 and lt 20 tons

123 IEER NA $22 (lt 135000 Btuh and lt 240000 Btuhr)

H04 lt 20 and lt 6333 tons (~

11 1 IEER NA $22 240000 Btuh and lt 760000 Btuhr)

HOS ~ 6333 Ions (~ 760000 Btuhr) 103 IEER NA $22

Air Cooled Heat Pumps

H06 lt 54 tons (lt 65000 Btuhr) 143 SEER 87 HSPF $30

H07 lt 54 and lt 11 25 tons

123 IEER 3 3 COP $30 (lt 65000 Btuh and lt 135000 Btuhr)

HOS lt11 25 and lt 20 tons

1U IEER 3 2 COP $30 (lt 135000 Btuh and lt 240000 Btuhr)

H09 lt 2000 tons (240000 Btuhr) 105 IEER 3 2 COP $30

Packaged Terminal Systems (PTAC and PTHP) (PTHP only)

H10 lt 8000 Btuhr (lt066 tons) 11 8 EER 33 $17

H11 ~8000 and lt10500 Btuhr (~066 and lt 0875 tons) 11 4 EER 32 $17

H12 gt10500 Btuhr ( 875 tons) 107 EER 31 $17

H22 lt 54 tons (lt 65000 Btuhr) 121 EER 12 3 IEER NA $22

lt 54 and lt 11 25 tons 121 EER 12 3 IEER $22 H23

(lt 65000 Btuh and lt 135000 Btuhr) NA

H24 lt11 25 and lt 20 tons

120 EER 12 2 IEER $22 (lt 135000 Btuh and lt 240000 Btuhr) NA

H25 lt20 and lt 633 tons

119 EER 12 2 IEER $22 (lt 240000 Btuh and lt 760000 Btuhr) NA

H26 ~ 633 tons( lt760000 Btuhr) 110 EER 11 1 IEER NA

$22

HVAC Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 26

Other HVAC EquipmentHotel Guest Room Occupancy Sensor Incentives are offered for occupancy-based controls that control electric air conditioning air source heat pumps and or electric heating units for individual hotel rooms Systems with nonshyelectric heat are not eligible Sensors must be controlled by automatic occupancy detectors or a key-card system and the default setting for controlled units differ by at least 5 degrees (or shut the unit fan and heating or cooling off completely) from the operating set point during unshyoccupied periods The control system may also be tied into other electric loads such as lighting and plug loads to shut them off when occupancy is not sensed The incentive is per room Replacement or upgrades of existing occupancy-based controls are not eligible as a prescriptive incentive

Economizer Integrated Dual Enthalpy Economizer ControlsThis measure is targeted to non-residential establishments whose HVAC equipment is not equipped with a functional economizer

Circulation Fan High-Volume Low-SpeedFans must be greater than 16 feet in diameter and have variable speed control

ECM Circulation Fan This measure is targeted to non-residential customers whose air handling equipment currently uses a SP or PSC fan motor rather than an ECM This measure applies only to circulating fan motors of 1 HP or less Above 1 HP motors are governed by NEMA standards and would see little to no efficiency benefit by adding an ECM The targeted fan can supply heating or cooling only or both heating and cooling

ECM Circulation Pump This measure is targeted for replacement of a shaded pole or permanent split capacitor pump or motor with an electronically commutated pump or motor le75 HP

Retrocomissioning Cooling Systems Confined to chiller plant andor isolated packaged units For reservation must contain proposal with defined scope at equipment level that demonstrates energy savings For final approval required final commissioning report including raw data (TAB reports) demonstrating actual scope

This prescriptive measure can be used for facilities with maximum cooling demand less than 1687 tons Larger systems require the use of custom HVAC measure

Retrocomissioning Whole Building Covers all relevant major mechanical systems such as chiller plant air side systems compressed air andor process systems For reservation must contain proposal with defined scope at equipment level that demonstrates energy savings For final approval required final commissioning report including raw data (TAB reports) demonstrating actual scope

This prescriptive measure can be used for facilities less than 404858 square feet Larger facilities require the use of custom HVAC measure

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 27

Energy Management System For installing a web-based building automation system in existing buildings that currently have no digital automated HVAC controls or have outdated pneumatic control systems with inoperable time control functions Existing HVAC control systems must not have time-of-day scheduling Upgrading obsolete EMS HVAC system with inoperable time clock functions will be reviewed on a case-by-case basis for incentive eligibility This incentive cannot be combined with incentives for programmable thermostats or setback-setup controls Must include the controls strategy and a scaled floor-plan with controlled areas highlighted HVAC BAS systems must be new and include bull Central time clock control bull Web-based interface with PC-based controls and graphic bull Building performance Tracking bull Open-protocol architecture controls system shall consist of either LonTalk (ANSICEA 7091) or BACNet (ASHRAE ANSI 135) protocol being used between all controlled and controlling devices and every node on the network bull Minimum setback period must exceed 2200 hours per year bull A minimum setback space temperature of at least 10degF when heating and 5degF when cooling bull Ability to adjust schedules and settings remotely over the internet bull Report generation describing energy and operating trends

This prescriptive measure can be used for facilities with maximum cooling demand less than 456 tons Larger systems require the use of custom HVAC measure

Demand Controlled Ventilation New ventilation controls must use carbon dioxide levels to measure occupancy and modify the percentage of outside air based on occupancy levels Only buildings with space heating and cooling requirements are eligible Conditioned spaces must be kept between 65ordmF and 75ordmF during occupied operating hours Carbon dioxide sensors must be installed in conjunction with fully functioning motor operated outside air dampers Dual temperature air-side economizers with zone-level CO2 sensors for rooftop units are eligible

This prescriptive measure can be used for facilities with maximum cooling demand less than 2210 tons Larger systems require the use of custom HVAC measure

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 28

Other HVAC Measures- consult project manual for eligibility specifications HVAC

Measure Incentive Unit Quantity Incentive

Measure Code er Unit

H1 8 Hotel Guest Room Occupancy Sensor Room $20

H1 9 Economizer Integrated Dual Enthalpy Economizer Controls Ton $1 5

H20 Circulation Fan High-Volume Low-Speed Unit $30

H21 ECM Circulation Fan Fan $1 5

H27 ECM Circulation Pump Pump $50

H28 Retrocommissioning Cooling Systems

Ton $750

H29 Retrocommissioning Whole Buidling

Square Foot $010

H29 Energy Management System Ton $2500

H30 Demand Controlled Ventilation Ton $2500

Other HVAC Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 29

Unitary HVAC Chillers

Air-Cooled Chillers Water Cooled Positive Displacement Reciprocating Chillers and Water Cooled Centrifugal Chillers Chiller applications including existing multiple chiller configurations (including redundant or lsquostand-byrsquo chillers) existing chillers serving multiple load groups and chillers in industrial applications are defined as non-standard applications and must follow a site-specific custom protocol $005kWh) rate

Incentives are offered for chillers with an IPLV value (expressed in kW per ton) that is less than or equal to the qualifying efficiency shown in the table below The chiller efficiency rating must be based on ARI Standard 550590-2003 for IPLV conditions The chillers must meet ARI standards 550590-2003 be UL listed and use a minimum ozone-depleting refrigerant (eg HCFC or HFC) The ARI net capacity value should be used to determine the chiller tons A manufacturerrsquos specification sheet with the rated kWton-IPLV or COP-IPLV must accompany the application along with the four point performance data that is the basis for the IPLV The application must include a certification that the chiller is appropriately sized for site design load conditions

Chillers must satisfy efficiency requirements for both full load and IPLV efficiencies for either Path A or Path B The table shows the minimum efficiency ratings to qualify for the prescriptive incentive which must be consistent with the expected operating conditions of the efficient chiller For example if the efficient chiller satisfies Path A and generally performs at part load the appropriate baseline chiller efficiency is the IPLV value under Path A If the efficient chiller satisfies Path B and generally performs at full load the appropriate baseline chiller efficiency is the full load value under Path B Generally chillers operating above 70 percent load for a majority (50 or more) of operating hours should use Path A and chillers below 70 load for the majority of operating hours should use Path B

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 30

C3 lt 75 tons

C4 75 tons and lt 150 tons

cs ~ 150 tons and lt 300 tons C6 ~ 300 tons

Water Cooled Centrifugal Chillers C7 lt 300 tons CB ~ 300 tons and lt 600 tons

C9 ~ 600 tons

Path A

Qualifying Full Load Efficiency

Qualifying IPLV Efficiency

Path B

Qualifying Full Load Efficiency

Qualifying IPLV Efficiency

0780 kWton 0567 kWton 0800 kWton 0540 kWton

0775 kWton 0554 kWton 0790 kWton 0527 kWton

0680 kWton 0522 kWton 0718 kWton 0486 kWton 0620 kWton 0486 kWton 0639 kWton 0441 kWton

0634 kWton 0536 kWton 0639 kWton 0405 kWton 0576 kWton 0494 kWton 0600 kWton 0360 kWton

0570 kWton 0494 kWton 0590 kWton 0360 kWton

I

Incentive ($ton)

$17

$17

Unitary Chiller Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 31

Refrigeration

Anti-Sweat Heater Controls Incentives are offered for devices that sense the relative humidity in the air outside of the display case and cycles or turns off the glass door (if applicable) and frame anti-sweat heaters when the ambient dew point is below a preset set point Technologies that can turn off anti-sweat heaters based on sensing condensation (on the inner glass pane) also qualify Incentive is based on the number of doors

Evaporator Fan Controls This measure is for the installation of controls in medium temperature walk-in coolers The controller reduces airflow of the evaporator fans when there is no refrigerant flow The measure must control a minimum of 120 HP where fans operate continuously at full speed The measure also must reduce fan motor power by at least 75 during the off cycle This measure is not applicable if any of the following conditions apply 1) Compressor runs all the time with high duty cycle 2) Evaporator fan does not run at full speed all the time 3) Evaporator fan motor runs on poly-phase power 4) Evaporator fan motor is not shaded-pole or permanent split capacitor (PSC) 5) Evaporator fan does not use off-cycle or time-off defrost

Floating Head Pressure Controls Controls must vary head pressure to adjust condensing temperatures in relation to outdoor air temperature Must replace existing constant pressure or manually controlled systems to achieve reduced head pressure in order to maintain a minimum saturated condensing temperature of 70 degF or a 20 degF variance below design heat pressure during mild weather conditions Compressor size must be at least 5 HP

Automatic Door Closers for Walk-In Coolers and Freezers The auto-closer should be applied to the main insulated opaque door(s) of a walk-in cooler or freezer The auto-closer must be able to firmly close that door when it is within one inch of full closure This must be a newly installed automatic door closer replacements on previously installed door closers are not eligible for an incentive

EC Motor for Walk-inReach-in Refrigerated cases or Freezer cases Incentives are offered for replacement of an existing standard-efficiency shaded-pole or permanent split capacitor evaporator fan motor in refrigerated display cases or fan coil in walk-ins The replacement unit must be an Electronically Commutated Motor (ECM) This measure cannot be used in conjunction with the Evaporator Fan Controller measure

ENERGY STAR Solid Door Freezer and Glass Door Freezer and Refrigerators Incentives are offered for replacement of existing self-contained refrigerators and freezers with units that are ENERGY STARreg listed Only units with built-in refrigeration systems are qualified Units with remote refrigeration systems or units do not qualify Customers must provide proof that the appliance meets the CEE or ENERGY STAR efficiency specifications using ASHRAE Standard 72-2005 (38degF plusmn 2degF) Incentive is per unit

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 32

Refrigeration Suction Pipe Insulation 1 Must insulate bare refrigeration suction lines of 1 58 inches in diameter or less on existing equipment only 2 Cooler lines require frac34 inch of flexible closed-cell nitrite rubber or an equivalent insulation 3 Freezer lines require 1-inch of flexible closed-cell nitrite rubber or an equivalent insulation 4 Insulation exposed to the outdoors must be protected from the weather (ie jacketed with a medium-gauge aluminum jacket)

Night Cover 1 Must install a cover on an existing open refrigerated display case to decrease its cooling load during off hours 2 The equipment manufacturer must not object to the use of night covers for the existing display case model 3 This rebate is based on the linear footage of the installed 4 The cover must be applied for a period of at least six hours

Strip Curtain on Walk-In CoolerFreezer 1 New strip curtains or plastic swinging doors must be installed on doorways of refrigerated spaces (conditioned to less than 50deg F) 2 Rebate is based on the linear footage of the doorway that the strip curtains are being installed in 3 Opening between the strip curtain and bottom of doorway must be no larger than 1 inch 4 Strips must have an overlay greater than 1 inch

Evaporator Coil Defrost Control 1The current system must include an operating electric defrost system with a functional electroshymechanical time clock 2 Evaporator coil temperature and pressure must be monitored by controller in order to determine optimal defrost cycles 3 New intelligent control systems to control the defrost systems will typically replace timed- defrost controls

Variable Speed Refrigeration Compressor This measure VSD control for refrigeration systems and its eligibility targets applies to retrofit construction in the commercial and industrial building sectors it is most applicable to grocery stores or food processing applications with refrigeration systems This protocol is for a VSD control system replacing a slide valve control system

Add Doors to Open Refrigerated Cases The eligible retrofit equipment is either no sweat doors or doors with anti-sweat heaters If a lighting retrofit is included with the new doors it must consume the same amount of energy or less energy than the old lighting Upgrades to lighting or other system components should be processed separately Horizontal cases are not eligible and should be processed as custom

Door Gaskets PECO Smart Ideas For Your Business CampI Program Application Manual

Q1 2017 pg 33

This measure is applicable to commercial refrigeration and applies to the replacement of worn-out gaskets with new better-fitting gaskets Applicable gaskets include those located on the doors of walk-in andor reach-in coolers and freezers This protocol applies to the main doors of both low temperature (ldquofreezerrdquo ndash below 32 degF) and medium temperature (ldquocoolerrdquo ndash above 32 degF) walk-ins

Zero Energy Doors For this measure a no-heatlow-heat clear glass door must be installed on an upright display case It is limited to door heights of 57 inches or more Doors must have either heat reflective treated glass be gas filled or both This measure applies to low temperature cases onlymdashthose with a case temperature below 0degF Doors must have 3 or more panes Total door rail glass and frame heater amperage ( 120 volt) cannot exceed 039413 amps per door for low temperature display cases Rebate is based on the door width (not including case frame)

Air Cooled Refrigeration Condenser Approach temperature lt8F for low temperature loads lt13F for medium temperature loads

Oversized Condenser with VFD New standalone condenser must no more than 150 larger than load

Case Light Occupancy Controls Acceptable for freezer or refrigerated cases as well as open cases or cases with doors

LED Open Case Lighting For replacing open case T8 or T12 fluorescent fixtures with DLC listed LEDs on refrigerators coolers and freezers

LED Enclosed Case Lighting Refrigerated LED case lighting with or without motion sensors on enclosed refrigerated vertical displays The baseline equipment is assumed to be cases with uncontrolled T8 or T12 linear fluorescent lamps

LED Enclosed Case Lighting Freezer LED case lighting with or without motion sensors on enclosed freezer vertical displays The baseline equipment is assumed to be cases with uncontrolled T8 or T12 linear fluorescent lamps

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 34

Refrigeration Measures Ref Measure

Measure Incentive Unit IncentiveUnit Code R01 Anti-Sweat Heater Controls Door $30

R02 Evaporator Fan Controls Controller $50

R03 Floating-head Pressure Controls HP $20

R04 Automatic Door Closers fo r Walk-in Coolers Door $75

R05 Automatic Door Closers fo r Walk-in Freezers Door $75

R06 Evaporator Fan EC Motor fo r Reach- in Cases Motor $35

RO Evaporator Fan EC Motor fo r Walk-in Cases Motor $50

R08 ENERGY STARreg Glass Door Freezer lt15 Cu Ft Unit $100

R09 ENERGY STARreg Glass Door Freezer 15- 49 Cu Ft Unit $125

R10 ENERGY STARreg Glass Door Freezer ~ 50 Cu Ft Unit $145

R11 ENERGY STARreg Solid Door Freezer Unit $75

R12 ENERGY STARreg Glass Door Refrigerator lt50 Cu Ft Unit $30

R13 ENERGY STARreg Glass Door Refrigerator gt= 50 Cu Ft Unit $50

K14 t NtKGY ~ I AKreg ~Olld Uoor Ketngerator $ OU Cu t-t Unit $~0

R15 Suction Pipe Insulation Walk-in Coolers Linear Foot $050

R16 Suction Pipe Insulation Walk in Freezers Linear Foot $075

R17 Night Cover Linear Foot $800

R18 Strip Curtains on Walk-in Cooler Linear Foot $250

R19 Evaporator Coil Defrost Control Controller $7500

R20 Variable Speed Refrigeration Compressor Compressor $85

R21 Add Doors to Open Refrigerated Cases Door $55

R22 Door Gaskets Door $250

R23 Zero Energy Doors Door $50

R24 A ir Cooled Refrigeration Condenser Ton $10

R25 Oversized Condenser with VFD Ton $10

R26 Case Light Occupancy Controls Door $8

R27 LED Open Cose Lighting Cose $10

R28 LED Enclosed Case Lighting Refrigerated Door $30

R30 LED Enclosed Case Lighting Freezer Door $30

Refrigeration Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 35

Food Service Beverage and Snack Machine Controls Incentives are offered for refrigerated vending machines that contain non-perishable bottled and canned beverages Controller for both types of systems must include a passive infrared occupancy sensor to turn off fluorescent lights and other energized machine systems when the surrounding area is unoccupied for 15 minutes or longer For the refrigerated machines the control logic may include periodic power up at 2-hour intervals or longer to maintain product temperature and provide compressor protection

ENERGY STARreg Refrigerated Beverage Vending Machines Incentives are offered for ENERGY STARreg beverage vending machines Qualifying machines can be found at httpswwwenergystargovproductsothervending_machines

ENERGY STARreg Electric Steam Cooker This measure applies to the installation of electric ENERGY STAR steam cookers as either a new item or replacement for an existing unit Gas steam cookers are not eligible The steam cookers must meet minimum ENERGY STAR efficiency requirements A qualifying steam cooker must meet a minimum cooking efficiency of 50 percent and meet idle energy rates specified by pan capacity

ENERGY STARreg Electric Combination Oven This measure applies to electric ovens capable of handling single 12 x 20 x 25 pan per rack

ENERGY STARreg Commercial Convection Oven The oven must meet or exceed heavy load potato cooking energy efficiency of greater than 70 utilizing ASTM Standard F149 Applies only to electric ovens

ENERGY STARreg Commercial Fryers The commercial fryer must have a tested heavy load (French fry for large vats) cooking energy efficiency of greater than 80 utilizing American Society for Testing and Materials (ASTM) Standard F1361 for commercial fryers and ASTM Standard F2144 for large vat fryers Multiple vat configurations are paid per qualifying vat ENERGY STAR maintains a list of qualifying products and specifications at httpwwwenergystargov

ENERGY STARreg Commercial Hot Holding Cabinet Energy STAR rating electric

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 36

Food Service amp Other Measures FoodOther

Measure Incentive Unit Incentive

Measure Code Unit

F01 Beverage Machine Controls Unit $25

F02 Snack Machine Controls Unit $20

F03 ENERGY STARreg Refrigerated Beverage Vending Machir Unit $125

F04 ENERGY STARreg Commerc ial Steam Cooker Unit $200

F05 ENERGY STARreg Electric Combination Oven Unit $200

F06 ENERGY STARreg Commercial Electric Convection Oven Unit $150

F07 ENERGY STARreg Commerc ial Fryers Unit $100

F08 ENERGY STARregCommerc ial Hot Holding Cabinet Unit $200

Food Service Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 37

Motors and Variable Frequency DrivesEarly Replacement Motors For constant speed and uniformly loaded motors this measure applies to the replacement of old motors with new energy efficient motors of the same rated horsepower Old motors must be less than 15 years Replacements where the old motor and new motor have different horsepower ratings are considered custom measures Motors with variable speeds variable loading or industrial-specific applications are also considered custom measures

Motors Incentive Table Motors

Measure Code

HP Incentive per Motor

M01 15 - 10 $40 M02 11 - 50 $100 M03 51-100 $150 M04 gt100 $300

Only VFDs on unitary systems are eligible Non-unitary systems must be submitted as a custom measure Soft start motors are not eligible

Variable Frequency Drives on HVAC Fan Applications Incentives are offered for installing VFDs on existing HVAC fans that do not have pre-existing VFDs This measure applies to HVAC supply and return fans only All other fans including cooling tower fans must be submitted as custom measures Manually fixed speed settings on HVAC fans must be submitted via custom application The VFD must control motor speed automatically in response to pressure flow temperature or other variable signal The installation of a VSD must accompany the permanent removal or disabling of any throttling devices such as inlet vanes bypass dampers and throttling valves etc The incentive is offered per controlled HP

Variable Frequency Drives on Pump Applications Incentives are offered for installing VFDs on existing chilled water pumps and heating hot water pumps that do not have existing VFDs This measure applies to chilled water pumps and heating hot water pumps only All other pumps must be submitted as custom measures Manually fixed speed settings on pumps must be submitted via custom application The VFD must control motor speed automatically in response to pressure flow temperature or other variable signal The installation of a VSD must accompany the permanent removal or disabling of any throttling devices such as throttling valves The incentive is offered per controlled HP

Variable Speed Control for Kitchen Exhaust Hoods The measure consists of installing a new VSD in conjunction with a sensor control system that varies the exhaust rate of kitchen ventilation (exhaust andor makeup air fans) based on the heat and effluent output from the cooking appliances (ie the more heat and smokevapors generated the more ventilation needed) This involves installing a temperature sensor in the hood exhaust collar andor an optic sensor on the end of the hood that senses cooking conditions and allows the system to automatically vary the rate of exhaust to match requirements by adjusting the fan speed accordingly

Variable Speed Drives for Process or Other Equipment VFD must be used in conjunction with a process (non HVAC) application To qualify for this incentive the driven equipment must operate at least 2000 hours per year Redundant or back- up units do not qualify VFDs replacing existing VFDs do not qualify The VFD must control motor

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 38

speed automatically in response to pressure flow temperature or other variable signal VFDs installed as ldquosoft startrdquo without automatic manual closed loop speed control do not qualify The installation of a VFD must accompany the permanent removal or disabling of any throttling devices such as throttling valves The incentive is per controlled HP and only applies to controlled motors less than 50 HP

VSDVFD Incentives Table VFD

Measure Code

Measure Unit Incentive per Unit

Fan Application

V01 VFD on HVAC Fan HP $25 Pump Application

Variable Speed Control for Kitchen Exhaust Hoods

Variable Speed Drives for Process or Other Equipment

V02 VFD on Chilled Water Pumps HP $25 V03 VFD on Heating Hot Water Pumps HP $25

V04 Kitchen Exhaust Fan Retrofit Hood HP $500

V05 Process Motor lt 50 HP HP $50

Domestic Hot Water Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater This measure documents the energy savings attributed to converting from a standard electric water heater to an ENERGY STAR natural gaspropane-fired water heater or a standard oil-fired water heater with an Energy Factor of 0585

Heat Pump Water Heater This includes heat pump water heaters with energy factors meeting ENERGY STAR criteria The measure described here involves a direct retrofit of a resistive electric water heater with a heat pump water heater It does not cover systems where the heat pump is a pre-heater or is combined with other water heating sources More complicated installations can be treated as custom projects

Low Flow Pre-Rinse Spray Valve This measure applies to efficient low flow pre-rinse sprayers in grocery and food service applications The most likely areas of application are kitchens in restaurants and hotels Only premises with electric water heating may qualify for this incentive In addition the replacement pre-rinse spray nozzle must use less than 16 gallons per minute with a cleanability performance of 26 seconds per plate or less Low flow pre-rinse sprayers reduce hot water usage and save energy associated with water heating

Domestic Hot Water Incentive Table

Measure Code Measure Unit Retrofit Incentive per

Unit

W01 Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater Unit $100

W02 Heat Pump Water Heater Unit $100 W03 Low-Flow Pre-Rinse Spray Valve Valve $17

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 39

Compressed Air SystemsNo-loss Condensate Drain No-loss Condensate Drains are controlled by a sensor that monitors the level of condensate and only open when there is a need to drain condensate They close before compressed air is allowed to escape This measure is targeted to non-residential customers whose equipment is a timed drain that operates on a pre-set schedule Acceptable baseline conditions are compressed air systems with standard condensate drains operated by a solenoid and timer

Air-Entraining air nozzle This measure is targeted to non-residential customers whose compressed air equipment uses stationary air nozzles in a production application with an open copper tube of 18rdquo or 14rdquo orifice diameter Energy efficient conditions require replacement of an inefficient non-air entraining air nozzle with an energy efficient air-entraining air nozzle that use less than 15 CFM at 100 psi for industrial applications

Storage Tanks for LoadNo Load Screw Compressors This measure protocol applies to the installation of air receivers with pressureflow controls to loadno load compressors Loadno load compressors unload when there is low demand The process of unloading is done over a period of time to avoid foaming of the lubrication oil Using a storage tank with pressureflow control will buffer the air demands on the compressor Reducing the number of cycles in turn reduces the number of transition times from load to no load and saves energy The baseline equipment is a loadno load compressor with a 1 galcfm storage ratio or a modulating compressor with blowdown The high efficiency equipment is a loadno load compressor with a minimum storage ratio of 4 gallons of storage per cfm

Cycling Refrigerated Thermal Mass Dryer When air is compressed water vapor in the air condenses and collects in liquid form Some of this condensate collects in the air distribution system and can contaminate downstream components such as air tools with rust oil and pipe debris Refrigerated air dryers remove the water vapor by cooling the air to its dew point and separating the condensate Changes in production and seasonal variations in ambient air temperature lead to partial loading conditions on the dryer Standard air dryers use a hot gas bypass system that is inefficient at partial loads A Cycling Thermal Mass Dryer uses a thermal storage medium to store cooling capacity when the system is operated at partial loads allowing the dryer refrigerant compressor to cycle

This measure is targeted to non-residential customers whose equipment is a non-cycling refrigerated air dryer with a capacity of 600 cfm or below Acceptable baseline conditions are a non-cycling (eg continuous) air dryer with a capacity of 600 cfm or below The replacement of desiccant deliquescent heat-of-compression membrane or other types of dryers does not qualify under this measure

Variable Speed Air Compressor This type of compressor uses a special drive to control the speed (RPM) of the unit which in turn saves energy compared to a fixed speed equivalent

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 40

No-loss Condensate Drain Air-Entraining Air Nozzle Cycling Refrigerated Thermal Mass Dryer

Compressor Incentive per

Equipment Type Units Quantity Daily Operating Unit

Hours

CA04 Storage Tanks for LoadNo Load Screw

Compressor HP $10 Compressors

CA05 Variable Speed Air Compressor

Compressor HP $30

CA06 Compressed Air System Optimization

Compressor HP $50

Compressed Air System Optimization The submitted optimization measures must be identified in an Air System Audit or equivalent study to be eligible The measures must demonstrate energy savings as evaluated by a Program Engineer Additionally measures must also fall under one or more of the category below to be eligible

1) Install storage Receivers (new receivers only replacing existing storage receivers are ineligible)

2) Compressor control (must demonstrate improvement in partial load efficiency of the compress air system including reduceeliminate partially loaded units)

3) Dryer control 4) Source pressure reduction 5) Right-sizing distribution components such as piping filters regulators

connectors and hoses (routine maintenance replacements are ineligible) 6) Leakage detection and repair 7) Eliminate low-efficiency end-usages of compressed air 8) Heat recovery (most reduce electricity consumption of the replaced heat source)

Compressed Air Systems Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 41

lt65000 Btuh

~ 65000 Btuh and lt135000 Btuh

135000 Btuhand lt240000 Btuh

240000 Btuh and lt760000 Btuh

760000 Btuh

154

142

135

125

123

Chiller Capacity Path APath B efficiency (kWton )

lt 150 tons

~150 tons and lt300 tons

300 tons and lt400 tons

400 tons and lt600 tons

600 tons

lt75 tons

~75 tons and lt150 tons

~150 tons and lt300 tons

~300 tons and lt600 tons

600 tons

0610 FU0695 FL and 0550 IPLV0440 IPLV

0610 FU0635 FL and 0550 IPLV0400 IPLV

0560 FU0595 FL and 0520 IPLV0390 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

Path APath B efficiency (kWton )

0750 FU0780 FL and 0600 IPLV0500 IPLV

0720 FU0750 FL and 0560 IPLV0490 IPLV

0660 FU0680 FL and 0540 IPLV0440 IPLV

0610 FU0625 FL and 0520 IPLV0410 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

Data Centers Data Center incentives are available for facilities ranging in size from office server closets to large standalone facilities

Air Cooled Chiller Path APath B EER (BtuWh) lt150 tons 101 FL97 FL and 137 IPLV158 IPLV ge150 tons 101 FL97 FL and 140 IPLV161 IPLV

Air Cooled Chiller without Condenser Air-cooled chillers without condenser must be rated with matching condensers and comply with air-cooled chiller efficiency requirements

Computer Room Air Conditioner

Computer Room Air Handler Variable Speed Replacing constant speed CRAH with VSD CRAH

Water Cooled Centrifugal Chiller

Water Cooled Positive Displacement or Reciprocating Chiller

Uninterruptible Power Supply Must be Energy Star Certified UPS or have full load efficiency rating

ge948 for 20-100 kVA ge978for ge100 kVA

Mainframe Refresh The rated efficiency of the replacement Mainframes power supply must be at least 8 more

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 42

- Equipment Type Units IncentiveUnit

D1 Air Cooled Chiller Ton $4000 D2 Air Cooled Chiller W ithout Condenser Ton $2000 D3 Computer Room Air Conditioner Ton $3000 D4 Computer Room Air Handler Variable Speed Ton $1000 D5 Water Cooled Centrifugal Chiller Ton $3000 D6 Water Cooled Positive Displacement or Reciprocatin $3000 D7 Uninterruptible Power Supply 20-100 kVA $1000 D8 Uninterruptible Power Supply gt 100 kVA $1000 D9 Mainframe Refresh $2000

D10 Server Refresh $2000 D11 PC Power Managment System $600 D12 HVAC System Optimization $005 D1 3 HoUCold Aisle Containment kWh saved $005 D14 Server Virtualization kW reduction $40000 D1 5 Thin Clients Units $500

efficient compared to the existing Mainframes power supply The replacement Mainframe if Inactive must be decommissioned and removed from the Data Center

Server Refresh Replacement servers must be ENERGY STARreg certified Replacement servers power supply must be 5 more efficiency compared to the power supply of the replaced servers The replaced server must be decommissioned and removed from the data center

HVAC System Optimization Final system must have these features

-Implementation of free cooling by the addition of an economizer system -Conversion of constant speed CRACCRAH into variable speed operations using VFDs and additional control functionalities and -Elevation of exhaust air temperature

HotCold Aisle Containment Includes both Hot and Cold Aisles Installing new containment measures not replacing already existed aisle containment Plenum-only installations not eligible Must result in higher difference between the return air (hot aisle) and supply air (cold aisle) temperatures measured at rack intake and exhaust locations

Server Virtualization Minimum of consolidating 5 Servers virtualized into one Server The virtualized servers if inactive are removed from the Data Center

Thin Clients Must be ENERGY STAR certified thin clients Decommissioned clients are removed from the Data Center

Data Center Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 43

Whole Building Systems Whole Building Systems Approach

The Whole Building Systems approach is intended to encourage integrated energy efficient designs by providing enhanced incentives to the customer who addresses overall energy performance Owners of eligible and qualifying new construction and major renovation projects can receive Whole Building Systems incentives when energy modeling indicates the projectrsquos performance is over 10 better than the ASHRAE 901-2007 Savings from eligible electric end-uses in kilowatt hours define the amount of financial incentive Energy savings achieved through renewable energy sources are not counted toward project energy savings and are not included in the savings basis Incentive reservations obtained during the design phase of a project will be honored for up to 24 months

How to Apply for Whole Building Systems Incentives Before construction begins bull A Pre-notification Application must be submitted documenting the Owners intention to

seek Whole Building Systems incentives bull The Owner must confirm the goals and energy efficiency strategies being pursued by the

design team on the completed Pre-notification Worksheet (Checklist tab) and in the project Summary (Whole Building Performance Summary tab)

bull Submit executable building modeling software files bull Submit the Whole Building Performance Summary worksheet energy simulation model

inputs and outputs and supporting documentation bull Receive confirmation and eligibility notification from the PECO Smart Ideas team and

receive an incentive reservation bull The final incentive paid may differ from the reserved incentive amount The final

incentive will be calculated based on site-verified equipment installation and performance The Owners final application and complete documentation must be received within 6 months of equipment installation or certificate of occupancy whichever is later

bull An executable energy model and model output demonstrating compliance with the criteria of ASHRAE 901-2007 Appendix G will be required and the equipment data sheets LED lighting fixtures must be on the DLC or Energy STAR qualified products list (QPL) to be eligible LED fixtures not on the DLC or Energy STAR QPL has the option of submitting LM79 and LM80 test reports for evaluation against DLC and Energy STAR eligibility criteria

During the construction period bull Owner and design team continue to work closely with their chosen contractor to assure

energy efficiency measures are included and installed in the completed building

When the building is constructed and operational bull Complete the Owner final application Request an equipment verification site visit by the

PECO Smart Ideas team Equipment must be installed and fully operational o Program staff will schedule a site visit and utilize submitted documentation and

measurement tools to verify that the installation follows the submitted energy simulation model

bull When PECO confirms that there are no significant changes to the installed equipment payment of the reserved incentive will be made to the Owner within 6 weeks

bull If changes from the proposed design energy simulation are found the Owner and design team will be notified of the reduced incentive amount a period of 20 calendar days will

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 44

Improvement Incentive per Sq Ft

over Code

~11 to lt20 $0155

~20 to lt30 $0233

~30 to lt40 $0350

~40 to lt60 $0525

~60 $0700

be allowed for supplemental information to be provided if no additional information is received by PECO Smart Ideas team the reduced incentive payments will be made and sent to the Owner if additional clarification and information is available program staff will work diligently to resolve the discrepancies and arrive at a reasonable incentive adjustment with the customer

Payments made by PECO Smart Ideas are final

Customer Eligibility The Owner of the proposed new building project must be a customer of PECO and receive delivery of electric service from PECO to receive kilowatt-hour based incentives Please note that electricity supply can be provided by any vendor

Project Eligibility bull The project must be a new construction or major renovation Major renovations involving

the removal and redesign of at least two building systems (such as interior lighting and mechanical systems) may apply for Whole Building Systems incentives

bull To qualify for incentives projects must demonstrate energy efficiency enhancements that achieve at least 11 improvement in the proposed design versus the standard baseline

bull The Owner must submit a Pre-approval Application to the program at the stage where changes for increased energy efficiency are still feasible and construction has not been completed

bull Projects receiving Whole Building Systems incentives are not eligible to receive other incentives such as the prescriptive or custom program incentives for the same scope

bull Project components that are NOT eligible for consideration as a basis for PECO Smart Ideas include the following o Alternative fuel sources (eg use of gas or oil equipment in lieu of electric) Please note

that combined heat and power (CHP) systems will be incentivized for the electricity they produce

o Renewable energy sources (eg solar wind biomass) bull Ineligible savings include exterior lighting process receptacle miscellaneous loads and

other unregulated end-uses Custom incentives are available for new construction exterior lighting

Whole Building Systems Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 45

Custom Project Specifications Instructions for Energy Savings Calculations for Custom Projects Custom projects must involve measures that result in a reduction in electric energy use (kWh) Electricity savings may result from either efficiency improvements or fuel switching Custom Incentives are based on the first year kilowatt-hour savings Custom applications must be accompanied by detailed engineering calculations that document the annual total energy savings

The following serve as guidelines for the minimum required documentation

Equipment Information Submittals bull A list of the present and proposed equipment and components to be installed

including manufacturerrsquos catalogmodel number bull Manufacturerrsquos specification sheets showing capacities and performance for all major

components

Energy Savings Calculations Provide calculations documenting the predicted energy consumption of the existing (or baseline) and proposed system using appropriate analytical tools and clearly stated assumptions Calculations may be performed by ldquohandrdquo but spreadsheet analysis or more rigorous modeling is preferred All analysis should be provided in electronic format All assumptions such as operating hours existing and proposed equipment operational details must be presented Engineering algorithms and procedures from recognized technical organizations such as ASHRAE SMACNA ANSI etc must be used Use rated performance factors tested under accepted procedures specified by recognized rating agencies such as AHRI ANSI ASTM etc Provide an explanation when equipment performance rating conditions vary from standard conditions

In support of the calculations extensive documentation must be provided that provides the basis for the savings estimates The documentation must provide information on the equipment operating schedule daily and seasonal load profile and baseline AND energy efficient equipment performance at the operating loads Typical documentation for custom projects often includes bull Engineering or architectural drawings and ldquoequipment schedulerdquo sheets bull Component specification sheets that include part load efficiency or performance

factors bull Spreadsheet calculations or inputoutput files and results from system modeling or

other engineering analysis using accepted engineering algorithms and practices bull Log sheets trend logs from a building management system or other operating

documentation that are often necessary to document operating hours and equipment loading and used as a basis for the calculations (in some cases short term monitoring may be required to document the load profile)

bull Control sequence of operations that are necessary where controls play a part in the savings equation

Additional documentation other than that described in the application may be required for program participation Larger projects may also require pre- and post-project sub metering or monitoring of loads andor power input as part of another measurement and verification activity to demonstrate the actual energy savings that are realized

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 46

Baseline for Custom Analysis Where equipment is replaced prior to the end of its rated service life in order to achieve energy savings the existing equipment performance may be used as the baseline in the energy savings calculations Where equipment is replaced due to failure or for other reasons (such as obsolescence or a need for more capacity) the baseline performance used in the savings calculation should be either the minimum performance that would be required by code for that equipment type and application (where a code applies) or the performance of the equipment that would have been selected as the customers standard practice when a code does not apply

Baseline or Existing System Summary On custom worksheet on application form include make model number name plate information (such as operating voltage and rated full load amps) rated capacity quantities equipment condition and age facility operating hours equipment operating schedule and load curves If needed attach separate sheets

All decisions regarding incentives for custom projects are in the sole discretion of PECO

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 47

APPENDIX PROGRAM UPDATES SUMMARY (Q1 2017) Multifamily Nursing Home and Assisted Living retrofit customers need to apply for incentives through the PECO Smart Ideas Multi-Family Program administered by Franklin Energy For more information please contact Taylor Adler at tadlerfranklinenergycom or call 1-844-4BIZ-SAVE Multifamily Nursing Home and Assisted Living new construction customers can proceed with applying for incentives here

Revised Incentives

Data Centers

Measure Incentive Effective Immediately Previous Incentive

Air-cooled chiller for data centers $40ton $10ton Air-cooled chiller without condenser for data centers $20ton $10ton

Computer room air conditioner $30ton $7ton Water-cooled centrifugal chiller for data centers $30ton $5ton Water-cooled positive displacement or reciprocating chiller for data centers

$30ton $5ton

Uninterruptible power supply 20-100 kVA $10kVA $6kVA Uninterruptible power supply gt100 kVA $10kVA $1kVA Mainframe refresh $20kW installed $5kW installed Server refresh $20kW installed $4kW installed Server virtualization $400kW reduction $4kW reduction Thin clients $5units $4units

Lighting (Effective Immediately)

Measure Incentive Effective Immediately Specification Previous

Incentive Specification

New construction exterior LED outdoor flood light LED parking garage and canopy lighting LED polearm mounted parking and roadway lighting LED wall mount fixture

$005kWh (custom)

Lighting Power Density (LPD) Requirements Unchanged

$10-54 fixture

Lighting Power Density (LPD) (Wft2) by Space Type or Building Area

LED Replacement Lamps (Tubes) 2

$250lamp 5 Min Watts Reduced

$250lamp 6 Min Watts Reduced

LED Replacement Lamps (Tubes) 4

$400lamp 10 Min Watts Reduced

$400lamp 12 Min Watts Reduced

Permanent Fixture Removal $010Watt removed

Clarification of calculation to represent actual Wattage removed

$010Watt removed

Lighting (Effective 6117)

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 48

Measure Incentive Effective 6117 Specification Previous

Incentive Previous Specification

Interior LED high-bay fixtures andor retrofit kits if lt 20000 LED Lumens

$50fixture 150 Min Watts Reduced

$75fixture 150 Min Watts Reduced

Interior LED high-bay fixtures andor retrofit kits if gt 20000 LED Lumens

$75fixture 225 Min Watts Reduced

$75fixture 150 Min Watts Reduced

New Incentives

Compressed Air

Measure New Incentive Effective Immediately Variable speed air compressor $30compressor HP Compressed air system optimization $50compressor HP

HVAC

Measure New Incentive Effective Immediately ECM circulation pump $50pump Retro-commissioning cooling systems $750ton Retro-commissioning whole building $010square foot Energy management system $25ton Demand controlled ventilation $25ton Water-cooled air conditioner $22ton

Food Service

Measure New Incentive Effective Immediately Combination oven $200unit ENERGY STARreg commercial convection oven $150unit ENERGY STARreg commercial fryers $100unit ENERGY STARreg commercial hot holding cabinet $200unit

Refrigeration

Measure New Incentive Effective Immediately Air-cooled refrigeration condenser $10ton Oversized condenser with VFD $10ton Case light occupancy controls $750door

Lighting

Measure New Incentive Effective Immediately Interior central lighting controls $00175sq foot

Motors and Drives

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 49

-

Measure New Incentive Effective Immediately VFD for dust collection system motor $50HP

Application Clarifications and Revised Requirements

Clarification of LED Eligibility for New Construction or Retrofit Projects

LED Eligibility is determined by whether lighting products are listed in either the DesignLights Consortium (DLC) Qualified Products List of commercial-grade LED luminaires or the US Environmental Protection Agency database of ENERGY STAR certified products For products not yet listed contractors may submit LM79 and LM80 test reports PECO Smart Ideas engineers will review test reports to determine if the product in question meets performance specifications

Revised W 9 Requirement

W-9 forms EIN numbers are no longer required

Deletion of erroneous statement in New Construction Lighting

The following statement from previous Business Manual has been deleted ldquoThe minimum lighting power density used to calculate the incentive shall be no lower than 50 of the ASHRAE 901-2007 valuerdquo

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 50

  • Commercial amp Industrial Program Application Manual
    • Follow This Easy Process
      • Pre-Approval Application Checklist
      • Final Application Checklist
          • Terms and Conditions
            • Program Effective Dates
            • Program and Project Eligibility
            • Incentive Payment Limits
            • Application Review Process
            • Inspections andor PUCrsquos Statewide Program Evaluation
            • Requirements for Custom Project Electricity Savings Calculation
            • Tax Liability
            • No Endorsement
            • Warranties
            • Limitation of Liability
            • Assignment
            • Customerrsquos Certification
            • Termination
            • Acknowledgement
              • Retrofit Lighting Solutions
                • General Linear Fluorescent Lamp and Ballast Specification Requirements
                • LED Lamps and Fixtures
                • Minimum Watts Reduced
                • Linear LED (Tubes)
                • Permanent Fixture Removal
                  • LED Traffic Signals
                    • LED Traffic Signals Incentive Table
                      • New Construction Lighting Specifications
                        • New Construction Lighting Incentives Table
                          • New Construction Lighting Power Density Code
                              • Exterior New Construction Lighting
                              • HVAC Equipment
                                • Air-Source Air Conditioners and Air-Source Heat Pumps
                                • Package Terminal Systems (Replacements)
                                • Ductless Mini-Split Heat Pump lt54 Tons
                                • Geothermal Heat Pump
                                  • Other HVAC Equipment
                                    • Hotel Guest Room Occupancy Sensor
                                    • ECM Circulation Fan
                                    • ECM Circulation Pump
                                    • Retrocomissioning Cooling Systems
                                    • Retrocomissioning Whole Building
                                    • Energy Management System
                                    • Demand Controlled Ventilation
                                    • Other HVAC Incentives Table
                                      • Unitary HVAC Chillers
                                        • Air-Cooled Chillers Water Cooled Positive Displacement Reciprocating Chillers and Water Cooled Centrifugal Chillers
                                          • Refrigeration
                                            • Anti-Sweat Heater Controls
                                            • Evaporator Fan Controls
                                            • Floating Head Pressure Controls
                                            • Automatic Door Closers for Walk-In Coolers and Freezers
                                            • EC Motor for Walk-inReach-in Refrigerated cases or Freezer cases
                                            • ENERGY STAR Solid Door Freezer and Glass Door Freezer and Refrigerators
                                            • Refrigeration Suction Pipe Insulation
                                            • Night Cover
                                            • Strip Curtain on Walk-In CoolerFreezer
                                            • Evaporator Coil Defrost Control
                                            • Variable Speed Refrigeration Compressor
                                            • Add Doors to Open Refrigerated Cases
                                            • Door Gaskets
                                            • Zero Energy Doors
                                            • Air Cooled Refrigeration Condenser
                                            • Oversized Condenser with VFD
                                            • Case Light Occupancy Controls
                                            • LED Open Case Lighting
                                            • LED Enclosed Case Lighting Refrigerated
                                            • LED Enclosed Case Lighting Freezer
                                              • Food Service
                                                • Beverage and Snack Machine Controls
                                                • ENERGY STARreg Refrigerated Beverage Vending Machines
                                                • ENERGY STARreg Electric Steam Cooker
                                                • ENERGY STARreg Electric Combination Oven
                                                • ENERGY STARreg Commercial Convection Oven
                                                • ENERGY STARreg Commercial Fryers
                                                • ENERGY STARreg Commercial Hot Holding Cabinet
                                                  • Motors and Variable Frequency Drives
                                                    • Early Replacement Motors
                                                    • Variable Frequency Drives on HVAC Fan Applications
                                                    • Variable Frequency Drives on Pump Applications
                                                    • Variable Speed Control for Kitchen Exhaust Hoods
                                                    • Variable Speed Drives for Process or Other Equipment
                                                      • Domestic Hot Water
                                                        • Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater
                                                        • Heat Pump Water Heater
                                                        • Low Flow Pre-Rinse Spray Valve
                                                        • Domestic Hot Water Incentive Table
                                                          • Compressed Air Systems
                                                            • No-loss Condensate Drain
                                                            • Air-Entraining air nozzle
                                                            • Storage Tanks for LoadNo Load Screw Compressors
                                                            • Cycling Refrigerated Thermal Mass Dryer
                                                            • Variable Speed Air Compressor
                                                            • Compressed Air System Optimization
                                                            • Compressed Air Systems Incentive Table
                                                              • Data Centers
                                                                • Air Cooled Chiller
                                                                • Air Cooled Chiller without Condenser
                                                                • Computer Room Air Conditioner
                                                                • Computer Room Air Handler Variable Speed
                                                                  • Replacing constant speed CRAH with VSD CRAH
                                                                    • Water Cooled Centrifugal Chiller
                                                                    • Water Cooled Positive Displacement or Reciprocating Chiller
                                                                    • Uninterruptible Power Supply
                                                                    • Mainframe Refresh
                                                                    • Server Refresh
                                                                      • Whole Building Systems
                                                                        • Whole Building Systems Approach
                                                                        • How to Apply for Whole Building Systems Incentives
                                                                        • Customer Eligibility
                                                                        • Project Eligibility
                                                                        • Whole Building Systems Incentives Table
                                                                          • Custom Project Specifications
                                                                            • Instructions for Energy Savings Calculations for Custom Projects
                                                                            • Equipment Information Submittals
                                                                            • Energy Savings Calculations
                                                                            • Baseline for Custom Analysis
                                                                            • Baseline or Existing System Summary

Step 3 Install Equipment or Perform Project Work The equipment installed must meet or exceed the specifications and requirements found

in measures tables and detailed in the Application Manual Equipment must be installed within the program period

Step 4 Submit Final Application Submit a final application as soon as possible after the project is completed within 90 days of

project completion but no later than May 15 2021 The final application is the same form as the pre-approval application Include the following documentation with your final application customercontractor information a signed final application agreement itemized invoices specifications and an updated scope of work

The program team will review your final application For some projects a final inspection will be part of the final review

The program team will send incentive checks four to six weeks after your final application is approved

If you need assistance please contact our program hotline 866-371-9343

Please visit our website wwwpecocomsmartideas

Pre-Approval Application Checklist Final Application Checklist

Registration Number on Application Signed Final Agreement Form (if applicable) Itemized Invoices

Documentation of existing equipment for Equipment SpecificationsCut Sheets for retrofit projects changes in equipment

Lighting worksheet for lighting projects Certificate of Occupancy (for New Equipment SpecificationsCut Sheets Construction projects only)

Updated Scope if project changed (please Copy of Current PECO Bill advise program staff during installation if Customer Signature on Customer

Acknowledgement scope changes Increase in incentive amount is not guaranteed)

Supporting Documentation Guidelines

Lighting Please attempt to submit photos of existing lighting Projects gt750000 kWh require lighting logging data DLCENERGY STAR certification documentation submittal will streamline review process Plansengineering submittals will be requested for large projects Square footage for centrally-controlled lighting control systems may be required

VFDs Nameplate photos andor engineering schedules of existing motors

Custom or lsquolargersquo (gt250000 KWh) mechanical projects MampV plan will be required for larger projects Program engineers will contact participants to establish MampV protocols

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 6

Terms and Conditions

PECO Energy Company (PECO) is offering prescriptive and custom incentives under the PECO Smart Ideas for Your Business to facilitate the implementation of cost-effective energy efficiency measures for commercial and industrial customers Any and all energy savings or environmental credits generated by the project described in this application will be retained by PECO

Funds are limited and subject to availability The program may be modified or terminated without prior notice

Program Effective Dates

The program is available until May 31 2021 The current cycle year runs from June 1 2016 through May 31 2017 (lsquoProgram Year Eightrsquo) Incentives are offered until approved funds are exhausted or until May 15 2021 whichever comes first All projects must be completed and the final applications received no later than May 15 2021 to be eligible for incentives

Program and Project Eligibility

Smart Ideas for Your Business incentives are available for the common energy efficiency measures listed in this Application Manual Program incentives are available under PECO Smart Ideas for Your Business to non-residential customers within PECOs service territory These incentives are available to all customers who pay into the Energy Efficiency Charge and receive their electricity over PECOrsquos distribution network regardless of the retail electric supplier

Most commercial projects involving energy savings are eligible Incentives are available for both prescriptive and custom measures Prescriptive measures are energy efficiency measures with pre-determined savings and incentive levels and are paid on a per unit basis These measures are available for specific Lighting HVAC Refrigeration and Food Service Variable SpeedFrequency Drives Compressed Air and Domestic Water Heater measures Custom measures include energy efficiency measures not listed on the prescriptive application forms Custom incentives must be approved by PECO in advance are determined on a case-by-case basis and are paid per unit of energy (kWh) saved Examples of projects that are NOT eligible for PECO Smart Ideas for Your Business include onndashsite electricity generation projects focused primarily on power factor improvement and renewable energy projects

Installation must be at the customerrsquos facility and provide 100 of the energy benefits as stated in the application for a period of five years or for the life of the product whichever is less PECO has the right to claim a pro-rated amount of any incentive paid if the customer ceases to be a distribution customer of PECO or removes the equipment or systems at any time during the five-year period or the life of the measure

Incentive Payment Limits

Prescriptive and custom incentives cannot exceed 100 of the customerrsquos total costs Contractor labor costs can be considered in the total project cost while customer internal labor costs cannot

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 7

Application Review Process

Pre-approval is required for all projects A pre-approval application must be submitted before you purchase equipment or technology for which the incentive is being requested Pre-approval is not a guarantee of program acceptance Completed applications will be reviewed in the order received The location or business name on the invoice must be the same as the application information The incentive is reserved for the project when PECO receives a complete preshyapproval application and determines that the project meets the program eligibility requirements Applicants who submit incomplete applications will be notified of deficiencies upon review of the application and could lose their place in line in the review process until all requested information is received Applicants are encouraged to call the program hotline if they have any questions about documentation requirements

PECO will review final applications for eligibility and completeness The final application and all required supporting documentation must be received within 90 days of project completion but no later than May 15 2021 to be eligible for incentives Project documentation including original dated invoices for the purchase and installation of the measures andor product specification sheets is required

The project invoice must provide sufficient detail to separate the project cost from the cost of other services such as repairs and building code compliance PECO reserves the right to request additional supporting documentation necessary to ensure measure eligibility and verify that the expected energy savings will occur Requested information may include but is not limited to equipment purchase dates installation dates proof that the equipment is operational manufacturer specifications warranty information and proof of customer co-payment PECO will make every effort to maintain the confidentiality of customer information except that such information must be provided to the PA PUC and its contractor as well as PECOrsquos contractor for measurement and evaluation

The installed measures are not eligible for incentives from other PA Act 129 Phase 3 Energy Efficiency Programs

Inspections andor PUCrsquos Statewide Program Evaluation

PECO its agents measurement and verification contractor andor the PUC statewide program evaluator have the right to audit or inspect all projects to verify compliance with the program rules and verify the accuracy of project documentation This may include pre-installation andor post-installation inspections detailed lighting layout descriptions metering data collection interviews and utility bill data analyses The customer must allow access to project documents and the facility where the measures were installed for a period of five years after receipt of incentive payment by PECO

Requirements for Custom Project Electricity Savings Calculation

The annual electricity savings must be calculated for custom projects using industry accepted engineering algorithms or simulation models The applicant must estimate the annual electricity usage of both the existing and proposed equipment based on the current operation of the facility If the existing equipment is at the end of its rated useful life the applicant must substitute equipment that would meet the applicable federal and local energy codes as the baseline when calculating the annual energy savings The applicant must be able to clearly describe the method used to calculate the savings The applicant must provide all assumptions used in the calculations and document the source for these assumptions Further information on custom measures can be found in the Application Manual which can be downloaded from

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 8

wwwpecocomsmartideasThe method and assumptions used by the applicant to calculate the annual savings will be reviewed by PECO PECO has sole and final determination of the annual energy savings to be used in calculating the incentive amount PECO also reserves the right to require specific measurement and verification activities including monitoring both before and after the retrofit and to base the incentive payment on the results of these activities

PECO may need to conduct inspections both before and after the retrofit projects to verify equipment and operation conditions Pre-approval application must be submitted while the existing equipment is still in operation in order to allow PECO the opportunity to view the existing equipment

Tax Liability

Incentives may be taxable for most taxpayers If the incentive is more than $600 it will be reported to the IRS and the customer will be provided with an IRS form 1099 unless the customer is exempt PECO is not responsible for any tax liability that may be imposed on any customer as a result of the payment of program incentives All customers must supply their Federal Tax Identification number to PECO in order to receive a Program Incentive Please consult with your tax professional for information on the tax treatment of the incentives

No Endorsement

PECO does not endorse support or recommend any particular manufacturer product or system design in promoting this program and PECO does not guarantee any specific level of energy savings with respect to any product system design or energy efficiency measure

Warranties

PECO DOES NOT WARRANT THE PERFORMANCE OF INSTALLED EQUIPMENT ANDOR SERVICES RENDERED AS PART OF THIS PROGRAM EITHER EXPRESSLY OR IMPLICITLY NO WARRANTIES OR REPRESENTATIONS OF ANY KIND WHETHER STATUTORY EXPRESSEDOR IMPLIED INCLUDING WITHOUT LIMITATIONS WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE REGARDING EQUIPMENT OR SERVICES PROVIDED BY A MANUFACTURER OR VENDOR CONTACT YOUR VENDORSERVICES PROVIDER FOR DETAILS REGARDING PERFORMANCE AND WARRANTIES

Limitation of Liability

By virtue of participating in this program customers agree to waive any and all claims or damages against PECO except the receipt of the program incentive if eligible Participating Customers agree that PECOrsquos liability in connection with this program is limited to paying the program incentive specified Under no circumstances shall PECO its representatives agents or subcontractors be liable for any lost profits special punitive consequential or incidental damages or for any other damages or claims connected with or resulting from participation in this program

Assignment

Customers may assign a portion or all of their program incentive payment to a specified vendor

Customerrsquos Certification Customer certifies that heshe purchased and installed the equipment listed in the application Customer agrees that all information is true and that heshe has conformed to all of the program and equipment requirements listed in the application

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 9

Termination

PECO reserves the right to extend modify (this includes modification of program incentive levels) or terminate this program without prior or further notice

Acknowledgement

I have read understood and am in compliance with all rules and regulations concerning this incentive program I certify that all information provided is correct to the best of my knowledge and I give PECO permission to share my records with the Pennsylvania PUC and agents representatives and contractors it selects to manage coordinate or evaluate the program Additionally I hereby authorize PECO to have reasonable access to my property to inspect the installation and performance of the equipment and installations that are eligible for incentives under the guidelines of the program

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 10

Retrofit Lighting Solutions

General Linear Fluorescent Lamp and Ballast Specification Requirements 32w 4ft HPT8 and reduced wattage T8 lamps must be listed on the Consortium of Energy Efficiency (CEE) product list or must meet CEE standards For further information visit wwwcee1org

LED Lamps and Fixtures The integral lamp or fixture must appear on the Energy Star Qualified Products List or the Design Lights Consortium Qualified Products List

bull Energy Star Qualified Fixture Product List httpwwwenergystargov bull Energy Star Qualified Integral LED lamps httpwwwenergystargov bull Design Lights Qualified Product List httpwwwdesignlightsorg

Minimum Watts Reduced Energy efficient fixtureslamps are required to be lower in load than existing fixtureslamps by specified levels the Minimum Watts Reduced Each lighting measure has its own Minimum Watts Reduced that must be met as eligibility requirement These levels are listed in the lighting worksheet ldquoLighting Incentives Tablersquo tab and reproduced below

Linear LED (Tubes) Linear LED lamps must be listed on the Design LightsTM Consortium (DLC) Qualified Products List

Type A LEDs bull Type A LED linear lamps are powered by a fluorescent ballast bull If present existing magnetic ballast must be removed and replaced with a compatible energy- efficient electronic ballast bull DLC Primary Use Requirement ndash DLC-listed equipment must be classified with one of the following Primary Use designations

o Replacement Lamps (Plug and Play) (UL Type A) bull Label must be affixed to the interior of fixture in a prominent location Label should indicate that the fixture has been retrofitted with

TLEDs and that fluorescent lamps should not be installed as replacements

Type B LEDs bull Type B LED tubes are powered by an internal driver bull Existing fluorescent ballast must be removed and fixturersquos incoming power wires are connected directly to the lamp sockets Strict

adherence to installation instructions is critical when rewiring existing fixtures

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 11

bull The LED linear lamps must be delivered as part of a UL 1598C Classified Luminaire Retrofit Kit with instructions explaining the LED linear lamps must be installed on a luminaire that is already UL Listed

bull The retrofitted luminaire must be clearly identified using the label included with the Retrofit Kit indicating that the luminaire has been modified and can no longer operate the originally intended fluorescent lamp(s)

Type C LEDs

bull Type C LED linear lamps are powered by an external driver bull Existing fluorescent ballast must be removed and replaced with a compatible external driver bull DLC Primary Use Requirement ndash DLC-listed equipment must be classified with one of the following Primary Use designations

o 2-lamp External Driver Lamp-Style Retrofit Kits (UL Type C) o 3-lamp External Driver Style Retrofit Kits (UL Type C) o 4-lamp External Driver Lamp-Style Retrofit Kits (UL Type C)

bull Technical specifications (manufacturerrsquos cut sheet) for the driver must be submitted with the application

Permanent Fixture Removal This measure is to be used only in conjunction with lighting retrofits and is intended for spaces that are currently over lit Incentives are paid $010watt reduced only on fixtures removed not on total watts reduced for entire projects Overall net lumen reduction must be achieved in order to qualify for a permanent fixture removal incentive

Example

(20) Existing fixtures at 10000 lumens each = 200000 lumens

(14) Proposed fixtures at 15000 lumens each = 210000 lumens

Since there is not a net reduction in lumens the six fixtures removed would not be eligible for a permanent fixture removal incentive

It is encouraged that spaces meet recommended foot-candle levels as detailed by IESNA Lighting Design Guide A Program Engineer will evaluate lumens reduction based on the type of fixtures removed and the DLC lumens rating of the fixtures installed

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 12

RETROFIT INTERIOR LIGHTING TABLE

Measure Code

Min Measure Name Watts Incentive Unit

Reduced Technical Specifications

CFL Lighting

CFL1A ENERGY STAR Hard-Wired CFL fixture Indoor AccentTrack 20 $250 lamp

Only complete new fixtures or modular hardwired retrofits with hardwired electronic ballasts qualify

CFL ballast must be programmed start or programmed rapid start with a power factor (PF) ge 090 and a total

harmonic distortion (THD) le 20 Screw-in CFLs are not eligible for this incentive

CFL1B ENERGY STAR Hard-Wired CFL fixture Indoor Directional WallCeiling Mount 20 $250 lamp

CFL1C ENERGY STAR Hard-Wired CFL fixture Indoor Omni-Directional WallCeiling Mount 20 $250 lamp

CFL2A ENERGY STAR Hard-Wired CFL fixture Indoor Portable LampTorchiere 20 $1 lamp

CFL2B ENERGY STAR Hard-Wired CFL fixture Indoor Recessed Downlight 20 $1 lamp

CFL2C ENERGY STAR Hard-Wired CFL fixture Indoor Recessed Downlight Retrofit Module 20 $1 lamp

CFL2D ENERGY STAR Hard-Wired CFL fixture Indoor Under CabinetStrip 20 $1 lamp

CFL3A ENERGY STAR Hard-Wired CFL fixture Outdoor Directional WallCeilingGroundPole Mount 30 $3 lamp

CFL3B ENERGY STAR Hard-Wired CFL fixture Outdoor Omni-Directional WallCeilingGroundPole Mount 30 $3 lamp

CFL3C ENERGY STAR Hard-Wired CFL fixture Outdoor Recessed Downlight 30 $3 lamp

CFL3D ENERGY STAR Hard-Wired CFL fixture Outdoor Recessed Downlight Retrofit Module 30 $3 lamp

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 13

Fluorescent Lighting FL1 Interior T5 New Fluorescent Fixture w Electronic Ballast 11 $5 fixture Any T5 is eligible

FL2 T5HO High-Bay Fixture 54 $25 fixture Fixture efficiency must be gt 90

High bay fixtures must be installed at least 15ft above finished floor

FL3 HPT8 High-Bay Fixture 82 $20 fixture Must use High Ballast Factor (gt96) Fixture efficiency must be gt= 85

High bay fixtures must be installed at least 15ft above finished floor

FL4 HPT8 Fixture 20 $5 fixture Must use Low Ballast Factor (lt80)

FL5 RW T8 Lamp - Lamp only 10 $3 lamp Existing T8 fixture re-ballasting to a higher ballast factor are not eligible

HID Measures HID1 Ceramic HID - 25 -39 Watt 95 $13 fixture

Replacing higher wattage HID or High Pressure Sodium or Mercury Vapor

Interior replacements only

HID2 Ceramic HID - 70 Watt 155 $13 fixture HID3 Ceramic HID - 100 Watt 170 $15 fixture HID4 Pulse Start HID - 150 nominal Watts 72 $10 fixture HID5 Pulse Start HID - 350 nominal Watts 100 $13 fixture

HID6 Pulse Start HID - 1000 nominal Watts 400 $15 fixture

Interior LED Fixtures

LED1 ENERGY STAR Integral LED fixture Indoor Recessed Downlight Retrofit Module 38 $7 fixture Retrofit module of existing recessed fixture

LED2 ENERGY STAR Integral LED fixture Indoor Recessed Downlight 38 $7 fixture

New indoor recessed downlight fixture LED3 ENERGY STAR Integral LED fixture Indoor Portable LampTorchiere 30 $7 fixture

LED4 LED AccentTrack Lighting Fixtures 32 $6 head

LED5 LED Low-Bay Fixtures 150 $20 fixture For replacement of HID fixtures mounted le 15 above finished floor

LED6 LED Low-Bay Retrofit Kits 150 $20 fixture

LED8 LED Troffer Fixtures and Retrofit Kits 5 $10 fixture Troffers typically installed in lay-in ceilings 2x2 2x4 configuration

LED9 LED Surface and Suspended Linear Fixtures 25 $10 fixture Examples of LED surface-mounted luminaires include wrap vapor tight and strip fixtures (non-cooler)

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 14

-

Interior LED High Bay Fixtures

LED10A LED High-Bay Fixtures le 20000 LED lumens 150 $50 fixture

High bay fixtures must be installed at least 15ft above finished floor

LED10B LED High-Bay Fixtures gt 20000 LED lumens 225 $75 fixture

LED11A LED High-Bay Retrofit Kits le 20000 LED lumens 150 $50 fixture

LED11B LED High-Bay Retrofit Kits gt20000 LED lumens 225 $75 fixture

LED Parking Garage and Canopy Fixtures

LED12 LED Parking Garage and Canopy Fixtures and Retrofit Kits Outdoor lt= 5000 LED lumens 50 $15 fixture

Fixtures must be physically installed in a parking garage (area where vehicles are physically parked) or

fuel pump canopy Typically represents replacement of le175 W Metal

Halide or equivalent

LED13 LED Parking Garage and Canopy Fixtures and Retrofit Kits Outdoor 5001 - 10000 LED lumens 70 $30 fixture

Typically represents replacement of Metal Halide or equivalent greater than 175W and less than 400W

Product must be installed in a parking garage (area where vehicles are physically parked) or fuel pump

canopy

LED14 LED Parking Garage and Canopy Fixtures and Retrofit Kits Outdoor gt 10000 LED lumens 150 $50 fixture

Typically represents replacement of ge400 W Metal Halide or equivalent

Product must be physically installed in a parking garage (area where vehicles are physically parked) or

fuel pump canopy LED Screw in Lamps

ESLED1 ENERGY STAR Screw-in LED Bulb (Decorative Globe) 14 $5 lamp Lamp with globe shape such as type G

ESLED2 ENERGY STAR Screw-in LED Bulb (Decorative non-globe 14 $5 lamp Lamps with non-globe or candle-like shape such as type B C CA F

ESLED3 ENERGY STAR Screw-in LED Bulb and Low Voltage Mini-Reflector Bulbs (DirectionalReflector) 14 $5 lamp ANSI standard PAR and MR type lamps

ESLED4 ENERGY STAR Screw-in LED Bulb (Standard) 14 $5 lamp Lamp such as A series

ESLED5 ENERGY STAR Screw-in LED Bulb (Standard 3-Way) 14 $5 lamp Lamp such as A series with three light levels

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 15

- -LED Screw in Lamps Smart Bulbs

ESLED6 ENERGY STAR Screw-in LED Bulb (Decorative Globe Smart Bulb) 14 $5 lamp Lamp with globe shape such as type G

ESLED7 ENERGY STAR Screw-in LED Bulb (Decorative non-globe Smart Bulb) 14 $5 lamp Lamps with non-globe or candle-like shape such as

type B C CA F

ESLED8 ENERGY STAR Screw-in LED Bulb (DirectionalReflector Smart Bulb) 14 $5 lamp ANSI standard PAR lamps

ESLED9 ENERGY STAR Screw-in LED Bulb (Standard Smart Bulb) 14 $5 lamp Lamp such as A series

LED Tubes (replacing fluorescent)

TLED1 LED Replacement Lamps (Tubes) 2 5 $250 lamp Refer to Lighting Technical Specifications for requirements DLC Type A B and C are eligible bullType B linear (Interior driver) LEDs have the following installation requirements

bullExisting fluorescent ballast must be removed and fixturersquos incoming power wires are connected directly to the lamp sockets Strict adherence to installation instructions is critical when rewiring existing fixtures bullThe LED linear lamps must be delivered as part of a UL 1598C Classified Luminaire Retrofit Kit with instructions explaining the LED linear lamps must be installed on a luminaire that is already UL Listed bullThe retrofitted luminaire must be clearly identified using the label included with the Retrofit Kit indicating that the luminaire has been modified and can no longer operate the originally intended fluorescent lamp(s)

TLED2 LED Replacement Lamps (Tubes) 4 10 $4 lamp

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 16

LED Exterior Lighting

ELED1 ENERGY STAR Integral LED fixture Outdoor Recessed Downlight Retrofit Module 24 $10 module

ENERGY STAR or DLC Qualified fixtures ELED2 ENERGY STAR Integral LED fixture Outdoor Recessed

Downlight 24 $10 fixture

ELED3 LED Outdoor Flood Light Fixtures lt= 5000 LED lumens 50 $10 fixture Typically represents replacement of le175 W Metal Halide or equivalent Fixtures must be DLC qualified

ELED4 LED Outdoor Flood Light Fixtures gt 5000 LED lumens 70 $15 fixture Typically represents replacement of Metal Halide or equivalent greater than 175W Fixtures must be DLC qualified

ELED5 LED PoleArm Mounted Parking and Roadway Fixtures and Retrofit Kits lt= 5000 LED lumens 50 $25 fixture Typically represents replacement of le175 W Metal

Halide or equivalent Product must be DLC qualified

ELED6 LED PoleArm Mounted Parking and Roadway Fixtures and Retrofit Kits Outdoor gt 10000 LED lumens 150 $75 fixture

Typically represents replacement of Metal Halide or equivalent greater than 400W Product must be DLC

listed

ELED7 LED PoleArm Mounted Parking and Roadway Fixtures and Retrofit Kits Outdoor 5001 - 10000 LED lumens 70 $50 fixture

Typically represents replacement of Metal Halide or equivalent greater than 175W and less than 400W

Product must be DLC listed

ELED8 LED Wall Mount Fixtures and Retrofit Kits Outdoor lt= 5000 LED lumens 50 $25 fixture Typically represents replacement of le175 W Metal

Halide or equivalent Product must be DLC qualified

ELED9 LED Wall Mount Fixtures and Retrofit Kits Outdoor gt 5000 LED lumens 70 $50 fixture

Typically represents replacement of Metal Halide or equivalent greater than 175W Product must be DLC

qualified Permanent Fixture Removal

PFRA Indoor Permanent Fixture Removal combined with lighting retrofit na $010 watt removed Incentive only valid when units = ldquofixturerdquo in this table

Incentive is only offered when net lumens are reduced PFRB Outdoor Permanent Fixture Removal combined with lighting retrofit na $010 watt removed

Other LED Lighting LEDEXIT LED Exit Sign

na

$2 sign Replacing Incandescent or Fluorescent

SIGN1A Indoor LED Channel Signage $8 letter

Replacing Neon SIGN1B Outdoor LED Channel Signage $8 letter

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 17

Lighting Controls

CTL Unitary Sensor Controls

na

$1500 sensor

Passive infrared ultrasonic detectors are eligible Includes daylighting controls and all occupancy controls

Controls can be onoff stepped or continuous (dimming) Daylight sensor controls are required to be commissioned in order to ensure proper sensor calibration and energy savings

Minimum of 30 watts controlled per control

CLC Interior Central Lighting Controls $00175

square foot of area

under control

Automated central lighting control systems with override capabilities

This measure includes centrally-controlled time clocks wireless on off switches bi level switches computer based

controls pre-set scene selection dimmable ballasts and on-off dimmer switches for non-personal tuning

Floor plan must be submitted verifying square footage

DAYOCC Controls Combination - Daylighting and Occupancy Fixture Mounted $1500 sensor Minimum of 30 watts controlled per control

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 18

LED Traffic SignalsThis measure applies to the early replacement of existing incandescent traffic lights and pedestrian signals with LEDs New LED traffic signals must comply with ENERGY STAR requirements which can be found at httpswwwenergystargoviapartnersproduct_specseligibilitytraffic_eligpdf98bfshy1786

LED Traffic Signals Incentive Table

Round Traffic Signals 8 Red

Incentive per Signal

$15

8 Yellow 8 Green 12 Red

12 Yellow 12 Green

Turn Arrow Signals

8 Red

$13

8 Yellow 8 Green 12 Red

12 Yellow 12 Green

Pedestrian Signals

9 Pedestrian Only

$13

12 Hand Only 12 Pedestrian Only 12 Countdown Only

12 Pedestrian and Hand Overlay 16 Pedestrian and Hand Side by

Side 16 Pedestrian and Hand Overlay

16 Hand and Countdown Side-by-Side

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 19

Lighting Controls that Exceed Code Requirements

New Construction Lighting SpecificationsUnder the Lighting Power Density Approach the lighting power installed is compared with the lighting power allowed by code Incentives are available for systems where the installed lighting power is lower than the code-allowed power by at least 10 Savings are based on the Lighting Power Density (LPD) calculated on a watts per square foot basis Incentives will be paid only on the area of the building where the lighting installation is complete and is ready for occupancy If a portion of a building is not built-out such that the lighting in an area is not complete and ready for occupancy then that portion is not eligible for an incentive Baseline lighting power density is based on ASHRAE 901- 2007 Either the Space-by-Space or Building Area method may be used to calculate the LPD for the purposes of the incentive

Required Documentation bull Lighting Worksheet bull COMcheck Interior Lighting Report or equivalent analysis demonstrating space-byshy

space or building area calculations bull Reflected ceiling plans and electrical plan sheets showing lighting fixture layout bull Lighting fixture schedule sheet including fixture counts bull Fixture submittal or specification sheets showing model number and rated fixture wattage bull Architectural floor plans displaying floor area affected by proposed lighting installation

New Construction Lighting Incentives Table Lighting Wattssq ft

Improvement over of Code Incentive

gt= 10 and lt 20 $0035sq gt= 20 and lt 30 $007sq ft gt= 30 and lt 40 $0105sq

gt= 40 $021 sq ft

Incentives will be paid on a ($005kWh) custom basis Please contact Program Staff for eligibility of lighting controls for New Construction projects

Interior Occupancy Sensors Incentives are offered for occupancy-based controls in areas where they are not required by code Passive infrared ultrasonic detectors and fixture-integrated sensors or sensors with a combination sensor are eligible All sensors must be hard-wired and control interior lighting fixtures The incentive is per Watt controlled An inventory of the controlled fixtures and their wattage must be provided for each sensor with the Final Application

Daylight Dimming System Incentives are offered for daylight sensor controls in spaces with suitable available ambient light for at least part of the day Light may be through skylights clerestories windows or ldquolight tubesrdquo The controls can be onoff stepped or continuous dimming The onoff controller should turn off artificial lighting when the interior illuminance meets the desired indoor lighting level The stepped controller generally dims the artificial lighting 50 when the interior illuminance levels reach 50 of the desired lighting levels Continuous or dimming controllers dim artificial lighting proportionally to the available ambient light All types of daylight sensor controls are required to be commissioned in order to ensure proper sensor calibration and energy savings

Required Documentation bull Cut sheets or submittals of lighting control systems Reflected ceiling plans or schedule

showing which fixtures are controlled by lighting controls

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 20

New Construction Lighting Power Density CodeRequirements ndash Space by Space Method

Building Specific Space Types LPD (Wft2) Building Specific Space Types LPD (Wft2)

GymnasiumExercise Center AutomotivemdashServiceRepair 07

Playing Area 14 Manufacturing

Exercise Area 09 Low (lt25 ft Floor to Ceiling Height) 12

CourthousePolice StationPenitentiary High (gt25 ft Floor to Ceiling Height) 17

Courtroom 19 Detailed Manufacturing 21

Confinement Cells 09 Equipment Room 12

Judges Chambers 13 Control Room 05

Fire Stations HotelMotel Guest Rooms 11 Fire Station Engine Room 08 DormitorymdashLiving Quarters 11

Sleeping Quarters 03 Museum

Post Office-Sorting Area 12 General Exhibition 10 Convention Center-Exhibit Space 13 Restoration 17

Library BankOfficemdashBanking Activity Area 15 Card File and Cataloging 11 Religious Buildings

Stacks 17 Worship Pulpit Choir 24

Reading Area 12 Fellowship Hall 09

Hospital Retail

Emergency 27 Sales Area [For accent lighting see 93121(c)] 17

Recovery 08 Mall Concourse 17

Nurse Station 10 Sports Arena

ExamTreatment 15 Ring Sports Area 27

Pharmacy 12 Court Sports Area 23

Patient Room 07 Indoor Playing Field Area 14

Operating Room 22 Warehouse

Nursery 06 Fine Material Storage 14

Medical Supply 14 MediumBulky Material Storage 09

Physical Therapy 09 Parking GaragemdashGarage Area 02

Radiology 04 Transportation

LaundrymdashWashing 06 AirportmdashConcourse 06

AirTrainBusmdashBaggage Area 10

TerminalmdashTicket Counter 15

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 21

New Construction Lighting Power Density CodeRequirements ndash Building Area Method

Building Area Type 221 LPD (Wft2)

Automotive facility 09

Convention center 12

Courthouse 12

Dining bar loungeleisure 13

Dining cafeteriafast food 14

Dining family 16

Dormitory 1

Exercise center 1

Gymnasium 11

Health-care clinic 1

Hospital 12

Hotel 1

Library 13

Manufacturing facility 13

Motel 1

Motion picture theater 12

Building Area Type LPD (Wft2)

Multifamily 07

Museum 11

Office 1

Parking garage 03

Penitentiary 1

Performing arts theater 16

Policefire station 1

Post office 11

Religious building 13

Retail 15

Schooluniversity 12

Sports arena 11

Town hall 11

Transportation 1

Warehouse 08

Workshop 14

221 In cases where both a common space type and a building specific type are listed the building specific space type shall apply

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 22

Exterior New Construction LightingExterior New Construction savings over code lighting power density will be incentivized using custom lighting measure at $005kWh rate Participants must submit exterior lighting plans Submittals COMCHECK REPORT and lighting schedule for exterior lighting Savings are calculated from the LPD (Wsq ft) indicated below Additional information may be required based on the building exterior type and space description indicated below To contribute to incentive LEDs must satisfy program requirements for DLC Energy Star or equivalent listing

Required Documentation bull COMcheck Interior Lighting Report or equivalent analysis demonstrating space-by-space or

building area calculations bull Drawings showing lighting fixture layout bull Lighting fixture schedule sheet including fixture counts bull Fixture submittal or specification sheets showing model number and rated fixture wattage

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 23

Building Exterior Space Description LPD

Unco erect Pariki Ilg Area Parlurng ots arnd Drives 0 15 WfW

B i ing Grournds W al 1Yays lless Hlan 11] e 10 Wltirneru- 00

W a Nays 10 middot de or greater 112 W

Plaza a reas

Spec rest re areas

Stainh1ays 1ow 2

B i ing 8ntrames and Exits Ma efilbies m wr near foot of door width

Other doors 2o w 1r ear foot of door width

Ctmqpies and Overhimgs Free starndillg and a ched tmd 12s w m2 m bullerhangs

0 door sales Op en areas (ind udi Ilg ve id e sales 05 W lo )

street frontage far vehicle sales lots 21] W linear toot in addi middot on to open are-0bullmiddot lo~nce

B i ing facades 0 2 W tfl2 middot or eacil illumirnated N311 or surface

o r 5 0 Wllinear root fo r eac h m n inated N3l1 o r

surface length

Automated te lle r rnachmiddot es a lld 210 W per loca tion plus 91] night deposito liies W 1pernddiliorml A I middot per

1oca middot om

Eirltrances and gatehouse inspecliion 125 W ffl2 o middot uncovered slatiaBS a goo~ ed acir ies area

Load ing are-0s or law enforcement 0 5 W 2 of u rnco1bullered area fire ambu rnce and otiher emergency service ibullehmiddotctes

Drive-through w indOWs a taslrood 400 W per drive-Hlrough restaurants

Parking near 24 -h our retail 80111 W per main entry entmn ces

HVAC Equipment Air-Source Air Conditioners and Air-Source Heat Pumps New unitary air conditioning units or air source heat pumps that meet or exceed the qualifying cooling efficiency shown in the HVAC Incentives Worksheet are eligible for an incentive They can be either split systems or single package units The efficiency of split systems is based on an ARI reference number All packaged and split system cooling equipment must meet Air Conditioning and Refrigeration Institute (ARI) standards (210240 320 or 340360) be UL listed use a minimum ozone-depleting refrigerant (eg HCFC or HFC) All required efficiencies are based on the Consortium for Energy Efficiency (CEE) high-efficiency commercial air conditioning and heat pump specifications (wwwcee1org) A manufacturerrsquos specification sheet indicating the system efficiency must accompany the application Disposal of the existing unit

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 24

must comply with local codes and ordinances

Package Terminal Systems (Replacements) Package terminal air conditioners and packaged terminal heat pumps are through-the-wall self-contained units that are 2 tons (24000 Btuh) or less All EER values must be rated at 95degF outdoor dry-bulb temperature

Ductless Mini-Split Heat Pump lt54 Tons Incentives are offered for Ductless Mini-Split Heat Pump lt54 Tons with SEER rating greater than or equal to 120 and EER greater than or equal to 145 and HSPF greater than or equal to 90

Geothermal Heat Pump Geothermal equipment is a high-efficiency groundwater source water source or ground source heat pump system that meets or exceeds the energy efficiency requirements shown in the tables below These measures do not apply to heat pump systems coupled with non-heat pump systems such as chillers rooftop AC units boilers or cooling towers which must be filed as custom measures All HVAC applications other than comfort cooling and heating such as process cooling must also be applied for as custom measures

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 25

HVAC Heating Qualifying Incentive

Equipment Type and Cooling Capacity Cooling Qualifying Efficiency ($ per cooling Measure Code Efficiency

ton)

Air Cooled Air Conditioner

H01 lt 54 tons (lt 65000 Btuhr) 15 SEER NA $22

H02 lt 54 and lt 11 25 tons

125 IEER $22 (lt 65 000 Btuh and lt 135 000 Btuhr) NA

H03 lt11 25 and lt 20 tons

123 IEER NA $22 (lt 135000 Btuh and lt 240000 Btuhr)

H04 lt 20 and lt 6333 tons (~

11 1 IEER NA $22 240000 Btuh and lt 760000 Btuhr)

HOS ~ 6333 Ions (~ 760000 Btuhr) 103 IEER NA $22

Air Cooled Heat Pumps

H06 lt 54 tons (lt 65000 Btuhr) 143 SEER 87 HSPF $30

H07 lt 54 and lt 11 25 tons

123 IEER 3 3 COP $30 (lt 65000 Btuh and lt 135000 Btuhr)

HOS lt11 25 and lt 20 tons

1U IEER 3 2 COP $30 (lt 135000 Btuh and lt 240000 Btuhr)

H09 lt 2000 tons (240000 Btuhr) 105 IEER 3 2 COP $30

Packaged Terminal Systems (PTAC and PTHP) (PTHP only)

H10 lt 8000 Btuhr (lt066 tons) 11 8 EER 33 $17

H11 ~8000 and lt10500 Btuhr (~066 and lt 0875 tons) 11 4 EER 32 $17

H12 gt10500 Btuhr ( 875 tons) 107 EER 31 $17

H22 lt 54 tons (lt 65000 Btuhr) 121 EER 12 3 IEER NA $22

lt 54 and lt 11 25 tons 121 EER 12 3 IEER $22 H23

(lt 65000 Btuh and lt 135000 Btuhr) NA

H24 lt11 25 and lt 20 tons

120 EER 12 2 IEER $22 (lt 135000 Btuh and lt 240000 Btuhr) NA

H25 lt20 and lt 633 tons

119 EER 12 2 IEER $22 (lt 240000 Btuh and lt 760000 Btuhr) NA

H26 ~ 633 tons( lt760000 Btuhr) 110 EER 11 1 IEER NA

$22

HVAC Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 26

Other HVAC EquipmentHotel Guest Room Occupancy Sensor Incentives are offered for occupancy-based controls that control electric air conditioning air source heat pumps and or electric heating units for individual hotel rooms Systems with nonshyelectric heat are not eligible Sensors must be controlled by automatic occupancy detectors or a key-card system and the default setting for controlled units differ by at least 5 degrees (or shut the unit fan and heating or cooling off completely) from the operating set point during unshyoccupied periods The control system may also be tied into other electric loads such as lighting and plug loads to shut them off when occupancy is not sensed The incentive is per room Replacement or upgrades of existing occupancy-based controls are not eligible as a prescriptive incentive

Economizer Integrated Dual Enthalpy Economizer ControlsThis measure is targeted to non-residential establishments whose HVAC equipment is not equipped with a functional economizer

Circulation Fan High-Volume Low-SpeedFans must be greater than 16 feet in diameter and have variable speed control

ECM Circulation Fan This measure is targeted to non-residential customers whose air handling equipment currently uses a SP or PSC fan motor rather than an ECM This measure applies only to circulating fan motors of 1 HP or less Above 1 HP motors are governed by NEMA standards and would see little to no efficiency benefit by adding an ECM The targeted fan can supply heating or cooling only or both heating and cooling

ECM Circulation Pump This measure is targeted for replacement of a shaded pole or permanent split capacitor pump or motor with an electronically commutated pump or motor le75 HP

Retrocomissioning Cooling Systems Confined to chiller plant andor isolated packaged units For reservation must contain proposal with defined scope at equipment level that demonstrates energy savings For final approval required final commissioning report including raw data (TAB reports) demonstrating actual scope

This prescriptive measure can be used for facilities with maximum cooling demand less than 1687 tons Larger systems require the use of custom HVAC measure

Retrocomissioning Whole Building Covers all relevant major mechanical systems such as chiller plant air side systems compressed air andor process systems For reservation must contain proposal with defined scope at equipment level that demonstrates energy savings For final approval required final commissioning report including raw data (TAB reports) demonstrating actual scope

This prescriptive measure can be used for facilities less than 404858 square feet Larger facilities require the use of custom HVAC measure

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 27

Energy Management System For installing a web-based building automation system in existing buildings that currently have no digital automated HVAC controls or have outdated pneumatic control systems with inoperable time control functions Existing HVAC control systems must not have time-of-day scheduling Upgrading obsolete EMS HVAC system with inoperable time clock functions will be reviewed on a case-by-case basis for incentive eligibility This incentive cannot be combined with incentives for programmable thermostats or setback-setup controls Must include the controls strategy and a scaled floor-plan with controlled areas highlighted HVAC BAS systems must be new and include bull Central time clock control bull Web-based interface with PC-based controls and graphic bull Building performance Tracking bull Open-protocol architecture controls system shall consist of either LonTalk (ANSICEA 7091) or BACNet (ASHRAE ANSI 135) protocol being used between all controlled and controlling devices and every node on the network bull Minimum setback period must exceed 2200 hours per year bull A minimum setback space temperature of at least 10degF when heating and 5degF when cooling bull Ability to adjust schedules and settings remotely over the internet bull Report generation describing energy and operating trends

This prescriptive measure can be used for facilities with maximum cooling demand less than 456 tons Larger systems require the use of custom HVAC measure

Demand Controlled Ventilation New ventilation controls must use carbon dioxide levels to measure occupancy and modify the percentage of outside air based on occupancy levels Only buildings with space heating and cooling requirements are eligible Conditioned spaces must be kept between 65ordmF and 75ordmF during occupied operating hours Carbon dioxide sensors must be installed in conjunction with fully functioning motor operated outside air dampers Dual temperature air-side economizers with zone-level CO2 sensors for rooftop units are eligible

This prescriptive measure can be used for facilities with maximum cooling demand less than 2210 tons Larger systems require the use of custom HVAC measure

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 28

Other HVAC Measures- consult project manual for eligibility specifications HVAC

Measure Incentive Unit Quantity Incentive

Measure Code er Unit

H1 8 Hotel Guest Room Occupancy Sensor Room $20

H1 9 Economizer Integrated Dual Enthalpy Economizer Controls Ton $1 5

H20 Circulation Fan High-Volume Low-Speed Unit $30

H21 ECM Circulation Fan Fan $1 5

H27 ECM Circulation Pump Pump $50

H28 Retrocommissioning Cooling Systems

Ton $750

H29 Retrocommissioning Whole Buidling

Square Foot $010

H29 Energy Management System Ton $2500

H30 Demand Controlled Ventilation Ton $2500

Other HVAC Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 29

Unitary HVAC Chillers

Air-Cooled Chillers Water Cooled Positive Displacement Reciprocating Chillers and Water Cooled Centrifugal Chillers Chiller applications including existing multiple chiller configurations (including redundant or lsquostand-byrsquo chillers) existing chillers serving multiple load groups and chillers in industrial applications are defined as non-standard applications and must follow a site-specific custom protocol $005kWh) rate

Incentives are offered for chillers with an IPLV value (expressed in kW per ton) that is less than or equal to the qualifying efficiency shown in the table below The chiller efficiency rating must be based on ARI Standard 550590-2003 for IPLV conditions The chillers must meet ARI standards 550590-2003 be UL listed and use a minimum ozone-depleting refrigerant (eg HCFC or HFC) The ARI net capacity value should be used to determine the chiller tons A manufacturerrsquos specification sheet with the rated kWton-IPLV or COP-IPLV must accompany the application along with the four point performance data that is the basis for the IPLV The application must include a certification that the chiller is appropriately sized for site design load conditions

Chillers must satisfy efficiency requirements for both full load and IPLV efficiencies for either Path A or Path B The table shows the minimum efficiency ratings to qualify for the prescriptive incentive which must be consistent with the expected operating conditions of the efficient chiller For example if the efficient chiller satisfies Path A and generally performs at part load the appropriate baseline chiller efficiency is the IPLV value under Path A If the efficient chiller satisfies Path B and generally performs at full load the appropriate baseline chiller efficiency is the full load value under Path B Generally chillers operating above 70 percent load for a majority (50 or more) of operating hours should use Path A and chillers below 70 load for the majority of operating hours should use Path B

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 30

C3 lt 75 tons

C4 75 tons and lt 150 tons

cs ~ 150 tons and lt 300 tons C6 ~ 300 tons

Water Cooled Centrifugal Chillers C7 lt 300 tons CB ~ 300 tons and lt 600 tons

C9 ~ 600 tons

Path A

Qualifying Full Load Efficiency

Qualifying IPLV Efficiency

Path B

Qualifying Full Load Efficiency

Qualifying IPLV Efficiency

0780 kWton 0567 kWton 0800 kWton 0540 kWton

0775 kWton 0554 kWton 0790 kWton 0527 kWton

0680 kWton 0522 kWton 0718 kWton 0486 kWton 0620 kWton 0486 kWton 0639 kWton 0441 kWton

0634 kWton 0536 kWton 0639 kWton 0405 kWton 0576 kWton 0494 kWton 0600 kWton 0360 kWton

0570 kWton 0494 kWton 0590 kWton 0360 kWton

I

Incentive ($ton)

$17

$17

Unitary Chiller Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 31

Refrigeration

Anti-Sweat Heater Controls Incentives are offered for devices that sense the relative humidity in the air outside of the display case and cycles or turns off the glass door (if applicable) and frame anti-sweat heaters when the ambient dew point is below a preset set point Technologies that can turn off anti-sweat heaters based on sensing condensation (on the inner glass pane) also qualify Incentive is based on the number of doors

Evaporator Fan Controls This measure is for the installation of controls in medium temperature walk-in coolers The controller reduces airflow of the evaporator fans when there is no refrigerant flow The measure must control a minimum of 120 HP where fans operate continuously at full speed The measure also must reduce fan motor power by at least 75 during the off cycle This measure is not applicable if any of the following conditions apply 1) Compressor runs all the time with high duty cycle 2) Evaporator fan does not run at full speed all the time 3) Evaporator fan motor runs on poly-phase power 4) Evaporator fan motor is not shaded-pole or permanent split capacitor (PSC) 5) Evaporator fan does not use off-cycle or time-off defrost

Floating Head Pressure Controls Controls must vary head pressure to adjust condensing temperatures in relation to outdoor air temperature Must replace existing constant pressure or manually controlled systems to achieve reduced head pressure in order to maintain a minimum saturated condensing temperature of 70 degF or a 20 degF variance below design heat pressure during mild weather conditions Compressor size must be at least 5 HP

Automatic Door Closers for Walk-In Coolers and Freezers The auto-closer should be applied to the main insulated opaque door(s) of a walk-in cooler or freezer The auto-closer must be able to firmly close that door when it is within one inch of full closure This must be a newly installed automatic door closer replacements on previously installed door closers are not eligible for an incentive

EC Motor for Walk-inReach-in Refrigerated cases or Freezer cases Incentives are offered for replacement of an existing standard-efficiency shaded-pole or permanent split capacitor evaporator fan motor in refrigerated display cases or fan coil in walk-ins The replacement unit must be an Electronically Commutated Motor (ECM) This measure cannot be used in conjunction with the Evaporator Fan Controller measure

ENERGY STAR Solid Door Freezer and Glass Door Freezer and Refrigerators Incentives are offered for replacement of existing self-contained refrigerators and freezers with units that are ENERGY STARreg listed Only units with built-in refrigeration systems are qualified Units with remote refrigeration systems or units do not qualify Customers must provide proof that the appliance meets the CEE or ENERGY STAR efficiency specifications using ASHRAE Standard 72-2005 (38degF plusmn 2degF) Incentive is per unit

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 32

Refrigeration Suction Pipe Insulation 1 Must insulate bare refrigeration suction lines of 1 58 inches in diameter or less on existing equipment only 2 Cooler lines require frac34 inch of flexible closed-cell nitrite rubber or an equivalent insulation 3 Freezer lines require 1-inch of flexible closed-cell nitrite rubber or an equivalent insulation 4 Insulation exposed to the outdoors must be protected from the weather (ie jacketed with a medium-gauge aluminum jacket)

Night Cover 1 Must install a cover on an existing open refrigerated display case to decrease its cooling load during off hours 2 The equipment manufacturer must not object to the use of night covers for the existing display case model 3 This rebate is based on the linear footage of the installed 4 The cover must be applied for a period of at least six hours

Strip Curtain on Walk-In CoolerFreezer 1 New strip curtains or plastic swinging doors must be installed on doorways of refrigerated spaces (conditioned to less than 50deg F) 2 Rebate is based on the linear footage of the doorway that the strip curtains are being installed in 3 Opening between the strip curtain and bottom of doorway must be no larger than 1 inch 4 Strips must have an overlay greater than 1 inch

Evaporator Coil Defrost Control 1The current system must include an operating electric defrost system with a functional electroshymechanical time clock 2 Evaporator coil temperature and pressure must be monitored by controller in order to determine optimal defrost cycles 3 New intelligent control systems to control the defrost systems will typically replace timed- defrost controls

Variable Speed Refrigeration Compressor This measure VSD control for refrigeration systems and its eligibility targets applies to retrofit construction in the commercial and industrial building sectors it is most applicable to grocery stores or food processing applications with refrigeration systems This protocol is for a VSD control system replacing a slide valve control system

Add Doors to Open Refrigerated Cases The eligible retrofit equipment is either no sweat doors or doors with anti-sweat heaters If a lighting retrofit is included with the new doors it must consume the same amount of energy or less energy than the old lighting Upgrades to lighting or other system components should be processed separately Horizontal cases are not eligible and should be processed as custom

Door Gaskets PECO Smart Ideas For Your Business CampI Program Application Manual

Q1 2017 pg 33

This measure is applicable to commercial refrigeration and applies to the replacement of worn-out gaskets with new better-fitting gaskets Applicable gaskets include those located on the doors of walk-in andor reach-in coolers and freezers This protocol applies to the main doors of both low temperature (ldquofreezerrdquo ndash below 32 degF) and medium temperature (ldquocoolerrdquo ndash above 32 degF) walk-ins

Zero Energy Doors For this measure a no-heatlow-heat clear glass door must be installed on an upright display case It is limited to door heights of 57 inches or more Doors must have either heat reflective treated glass be gas filled or both This measure applies to low temperature cases onlymdashthose with a case temperature below 0degF Doors must have 3 or more panes Total door rail glass and frame heater amperage ( 120 volt) cannot exceed 039413 amps per door for low temperature display cases Rebate is based on the door width (not including case frame)

Air Cooled Refrigeration Condenser Approach temperature lt8F for low temperature loads lt13F for medium temperature loads

Oversized Condenser with VFD New standalone condenser must no more than 150 larger than load

Case Light Occupancy Controls Acceptable for freezer or refrigerated cases as well as open cases or cases with doors

LED Open Case Lighting For replacing open case T8 or T12 fluorescent fixtures with DLC listed LEDs on refrigerators coolers and freezers

LED Enclosed Case Lighting Refrigerated LED case lighting with or without motion sensors on enclosed refrigerated vertical displays The baseline equipment is assumed to be cases with uncontrolled T8 or T12 linear fluorescent lamps

LED Enclosed Case Lighting Freezer LED case lighting with or without motion sensors on enclosed freezer vertical displays The baseline equipment is assumed to be cases with uncontrolled T8 or T12 linear fluorescent lamps

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 34

Refrigeration Measures Ref Measure

Measure Incentive Unit IncentiveUnit Code R01 Anti-Sweat Heater Controls Door $30

R02 Evaporator Fan Controls Controller $50

R03 Floating-head Pressure Controls HP $20

R04 Automatic Door Closers fo r Walk-in Coolers Door $75

R05 Automatic Door Closers fo r Walk-in Freezers Door $75

R06 Evaporator Fan EC Motor fo r Reach- in Cases Motor $35

RO Evaporator Fan EC Motor fo r Walk-in Cases Motor $50

R08 ENERGY STARreg Glass Door Freezer lt15 Cu Ft Unit $100

R09 ENERGY STARreg Glass Door Freezer 15- 49 Cu Ft Unit $125

R10 ENERGY STARreg Glass Door Freezer ~ 50 Cu Ft Unit $145

R11 ENERGY STARreg Solid Door Freezer Unit $75

R12 ENERGY STARreg Glass Door Refrigerator lt50 Cu Ft Unit $30

R13 ENERGY STARreg Glass Door Refrigerator gt= 50 Cu Ft Unit $50

K14 t NtKGY ~ I AKreg ~Olld Uoor Ketngerator $ OU Cu t-t Unit $~0

R15 Suction Pipe Insulation Walk-in Coolers Linear Foot $050

R16 Suction Pipe Insulation Walk in Freezers Linear Foot $075

R17 Night Cover Linear Foot $800

R18 Strip Curtains on Walk-in Cooler Linear Foot $250

R19 Evaporator Coil Defrost Control Controller $7500

R20 Variable Speed Refrigeration Compressor Compressor $85

R21 Add Doors to Open Refrigerated Cases Door $55

R22 Door Gaskets Door $250

R23 Zero Energy Doors Door $50

R24 A ir Cooled Refrigeration Condenser Ton $10

R25 Oversized Condenser with VFD Ton $10

R26 Case Light Occupancy Controls Door $8

R27 LED Open Cose Lighting Cose $10

R28 LED Enclosed Case Lighting Refrigerated Door $30

R30 LED Enclosed Case Lighting Freezer Door $30

Refrigeration Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 35

Food Service Beverage and Snack Machine Controls Incentives are offered for refrigerated vending machines that contain non-perishable bottled and canned beverages Controller for both types of systems must include a passive infrared occupancy sensor to turn off fluorescent lights and other energized machine systems when the surrounding area is unoccupied for 15 minutes or longer For the refrigerated machines the control logic may include periodic power up at 2-hour intervals or longer to maintain product temperature and provide compressor protection

ENERGY STARreg Refrigerated Beverage Vending Machines Incentives are offered for ENERGY STARreg beverage vending machines Qualifying machines can be found at httpswwwenergystargovproductsothervending_machines

ENERGY STARreg Electric Steam Cooker This measure applies to the installation of electric ENERGY STAR steam cookers as either a new item or replacement for an existing unit Gas steam cookers are not eligible The steam cookers must meet minimum ENERGY STAR efficiency requirements A qualifying steam cooker must meet a minimum cooking efficiency of 50 percent and meet idle energy rates specified by pan capacity

ENERGY STARreg Electric Combination Oven This measure applies to electric ovens capable of handling single 12 x 20 x 25 pan per rack

ENERGY STARreg Commercial Convection Oven The oven must meet or exceed heavy load potato cooking energy efficiency of greater than 70 utilizing ASTM Standard F149 Applies only to electric ovens

ENERGY STARreg Commercial Fryers The commercial fryer must have a tested heavy load (French fry for large vats) cooking energy efficiency of greater than 80 utilizing American Society for Testing and Materials (ASTM) Standard F1361 for commercial fryers and ASTM Standard F2144 for large vat fryers Multiple vat configurations are paid per qualifying vat ENERGY STAR maintains a list of qualifying products and specifications at httpwwwenergystargov

ENERGY STARreg Commercial Hot Holding Cabinet Energy STAR rating electric

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 36

Food Service amp Other Measures FoodOther

Measure Incentive Unit Incentive

Measure Code Unit

F01 Beverage Machine Controls Unit $25

F02 Snack Machine Controls Unit $20

F03 ENERGY STARreg Refrigerated Beverage Vending Machir Unit $125

F04 ENERGY STARreg Commerc ial Steam Cooker Unit $200

F05 ENERGY STARreg Electric Combination Oven Unit $200

F06 ENERGY STARreg Commercial Electric Convection Oven Unit $150

F07 ENERGY STARreg Commerc ial Fryers Unit $100

F08 ENERGY STARregCommerc ial Hot Holding Cabinet Unit $200

Food Service Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 37

Motors and Variable Frequency DrivesEarly Replacement Motors For constant speed and uniformly loaded motors this measure applies to the replacement of old motors with new energy efficient motors of the same rated horsepower Old motors must be less than 15 years Replacements where the old motor and new motor have different horsepower ratings are considered custom measures Motors with variable speeds variable loading or industrial-specific applications are also considered custom measures

Motors Incentive Table Motors

Measure Code

HP Incentive per Motor

M01 15 - 10 $40 M02 11 - 50 $100 M03 51-100 $150 M04 gt100 $300

Only VFDs on unitary systems are eligible Non-unitary systems must be submitted as a custom measure Soft start motors are not eligible

Variable Frequency Drives on HVAC Fan Applications Incentives are offered for installing VFDs on existing HVAC fans that do not have pre-existing VFDs This measure applies to HVAC supply and return fans only All other fans including cooling tower fans must be submitted as custom measures Manually fixed speed settings on HVAC fans must be submitted via custom application The VFD must control motor speed automatically in response to pressure flow temperature or other variable signal The installation of a VSD must accompany the permanent removal or disabling of any throttling devices such as inlet vanes bypass dampers and throttling valves etc The incentive is offered per controlled HP

Variable Frequency Drives on Pump Applications Incentives are offered for installing VFDs on existing chilled water pumps and heating hot water pumps that do not have existing VFDs This measure applies to chilled water pumps and heating hot water pumps only All other pumps must be submitted as custom measures Manually fixed speed settings on pumps must be submitted via custom application The VFD must control motor speed automatically in response to pressure flow temperature or other variable signal The installation of a VSD must accompany the permanent removal or disabling of any throttling devices such as throttling valves The incentive is offered per controlled HP

Variable Speed Control for Kitchen Exhaust Hoods The measure consists of installing a new VSD in conjunction with a sensor control system that varies the exhaust rate of kitchen ventilation (exhaust andor makeup air fans) based on the heat and effluent output from the cooking appliances (ie the more heat and smokevapors generated the more ventilation needed) This involves installing a temperature sensor in the hood exhaust collar andor an optic sensor on the end of the hood that senses cooking conditions and allows the system to automatically vary the rate of exhaust to match requirements by adjusting the fan speed accordingly

Variable Speed Drives for Process or Other Equipment VFD must be used in conjunction with a process (non HVAC) application To qualify for this incentive the driven equipment must operate at least 2000 hours per year Redundant or back- up units do not qualify VFDs replacing existing VFDs do not qualify The VFD must control motor

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 38

speed automatically in response to pressure flow temperature or other variable signal VFDs installed as ldquosoft startrdquo without automatic manual closed loop speed control do not qualify The installation of a VFD must accompany the permanent removal or disabling of any throttling devices such as throttling valves The incentive is per controlled HP and only applies to controlled motors less than 50 HP

VSDVFD Incentives Table VFD

Measure Code

Measure Unit Incentive per Unit

Fan Application

V01 VFD on HVAC Fan HP $25 Pump Application

Variable Speed Control for Kitchen Exhaust Hoods

Variable Speed Drives for Process or Other Equipment

V02 VFD on Chilled Water Pumps HP $25 V03 VFD on Heating Hot Water Pumps HP $25

V04 Kitchen Exhaust Fan Retrofit Hood HP $500

V05 Process Motor lt 50 HP HP $50

Domestic Hot Water Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater This measure documents the energy savings attributed to converting from a standard electric water heater to an ENERGY STAR natural gaspropane-fired water heater or a standard oil-fired water heater with an Energy Factor of 0585

Heat Pump Water Heater This includes heat pump water heaters with energy factors meeting ENERGY STAR criteria The measure described here involves a direct retrofit of a resistive electric water heater with a heat pump water heater It does not cover systems where the heat pump is a pre-heater or is combined with other water heating sources More complicated installations can be treated as custom projects

Low Flow Pre-Rinse Spray Valve This measure applies to efficient low flow pre-rinse sprayers in grocery and food service applications The most likely areas of application are kitchens in restaurants and hotels Only premises with electric water heating may qualify for this incentive In addition the replacement pre-rinse spray nozzle must use less than 16 gallons per minute with a cleanability performance of 26 seconds per plate or less Low flow pre-rinse sprayers reduce hot water usage and save energy associated with water heating

Domestic Hot Water Incentive Table

Measure Code Measure Unit Retrofit Incentive per

Unit

W01 Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater Unit $100

W02 Heat Pump Water Heater Unit $100 W03 Low-Flow Pre-Rinse Spray Valve Valve $17

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 39

Compressed Air SystemsNo-loss Condensate Drain No-loss Condensate Drains are controlled by a sensor that monitors the level of condensate and only open when there is a need to drain condensate They close before compressed air is allowed to escape This measure is targeted to non-residential customers whose equipment is a timed drain that operates on a pre-set schedule Acceptable baseline conditions are compressed air systems with standard condensate drains operated by a solenoid and timer

Air-Entraining air nozzle This measure is targeted to non-residential customers whose compressed air equipment uses stationary air nozzles in a production application with an open copper tube of 18rdquo or 14rdquo orifice diameter Energy efficient conditions require replacement of an inefficient non-air entraining air nozzle with an energy efficient air-entraining air nozzle that use less than 15 CFM at 100 psi for industrial applications

Storage Tanks for LoadNo Load Screw Compressors This measure protocol applies to the installation of air receivers with pressureflow controls to loadno load compressors Loadno load compressors unload when there is low demand The process of unloading is done over a period of time to avoid foaming of the lubrication oil Using a storage tank with pressureflow control will buffer the air demands on the compressor Reducing the number of cycles in turn reduces the number of transition times from load to no load and saves energy The baseline equipment is a loadno load compressor with a 1 galcfm storage ratio or a modulating compressor with blowdown The high efficiency equipment is a loadno load compressor with a minimum storage ratio of 4 gallons of storage per cfm

Cycling Refrigerated Thermal Mass Dryer When air is compressed water vapor in the air condenses and collects in liquid form Some of this condensate collects in the air distribution system and can contaminate downstream components such as air tools with rust oil and pipe debris Refrigerated air dryers remove the water vapor by cooling the air to its dew point and separating the condensate Changes in production and seasonal variations in ambient air temperature lead to partial loading conditions on the dryer Standard air dryers use a hot gas bypass system that is inefficient at partial loads A Cycling Thermal Mass Dryer uses a thermal storage medium to store cooling capacity when the system is operated at partial loads allowing the dryer refrigerant compressor to cycle

This measure is targeted to non-residential customers whose equipment is a non-cycling refrigerated air dryer with a capacity of 600 cfm or below Acceptable baseline conditions are a non-cycling (eg continuous) air dryer with a capacity of 600 cfm or below The replacement of desiccant deliquescent heat-of-compression membrane or other types of dryers does not qualify under this measure

Variable Speed Air Compressor This type of compressor uses a special drive to control the speed (RPM) of the unit which in turn saves energy compared to a fixed speed equivalent

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 40

No-loss Condensate Drain Air-Entraining Air Nozzle Cycling Refrigerated Thermal Mass Dryer

Compressor Incentive per

Equipment Type Units Quantity Daily Operating Unit

Hours

CA04 Storage Tanks for LoadNo Load Screw

Compressor HP $10 Compressors

CA05 Variable Speed Air Compressor

Compressor HP $30

CA06 Compressed Air System Optimization

Compressor HP $50

Compressed Air System Optimization The submitted optimization measures must be identified in an Air System Audit or equivalent study to be eligible The measures must demonstrate energy savings as evaluated by a Program Engineer Additionally measures must also fall under one or more of the category below to be eligible

1) Install storage Receivers (new receivers only replacing existing storage receivers are ineligible)

2) Compressor control (must demonstrate improvement in partial load efficiency of the compress air system including reduceeliminate partially loaded units)

3) Dryer control 4) Source pressure reduction 5) Right-sizing distribution components such as piping filters regulators

connectors and hoses (routine maintenance replacements are ineligible) 6) Leakage detection and repair 7) Eliminate low-efficiency end-usages of compressed air 8) Heat recovery (most reduce electricity consumption of the replaced heat source)

Compressed Air Systems Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 41

lt65000 Btuh

~ 65000 Btuh and lt135000 Btuh

135000 Btuhand lt240000 Btuh

240000 Btuh and lt760000 Btuh

760000 Btuh

154

142

135

125

123

Chiller Capacity Path APath B efficiency (kWton )

lt 150 tons

~150 tons and lt300 tons

300 tons and lt400 tons

400 tons and lt600 tons

600 tons

lt75 tons

~75 tons and lt150 tons

~150 tons and lt300 tons

~300 tons and lt600 tons

600 tons

0610 FU0695 FL and 0550 IPLV0440 IPLV

0610 FU0635 FL and 0550 IPLV0400 IPLV

0560 FU0595 FL and 0520 IPLV0390 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

Path APath B efficiency (kWton )

0750 FU0780 FL and 0600 IPLV0500 IPLV

0720 FU0750 FL and 0560 IPLV0490 IPLV

0660 FU0680 FL and 0540 IPLV0440 IPLV

0610 FU0625 FL and 0520 IPLV0410 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

Data Centers Data Center incentives are available for facilities ranging in size from office server closets to large standalone facilities

Air Cooled Chiller Path APath B EER (BtuWh) lt150 tons 101 FL97 FL and 137 IPLV158 IPLV ge150 tons 101 FL97 FL and 140 IPLV161 IPLV

Air Cooled Chiller without Condenser Air-cooled chillers without condenser must be rated with matching condensers and comply with air-cooled chiller efficiency requirements

Computer Room Air Conditioner

Computer Room Air Handler Variable Speed Replacing constant speed CRAH with VSD CRAH

Water Cooled Centrifugal Chiller

Water Cooled Positive Displacement or Reciprocating Chiller

Uninterruptible Power Supply Must be Energy Star Certified UPS or have full load efficiency rating

ge948 for 20-100 kVA ge978for ge100 kVA

Mainframe Refresh The rated efficiency of the replacement Mainframes power supply must be at least 8 more

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 42

- Equipment Type Units IncentiveUnit

D1 Air Cooled Chiller Ton $4000 D2 Air Cooled Chiller W ithout Condenser Ton $2000 D3 Computer Room Air Conditioner Ton $3000 D4 Computer Room Air Handler Variable Speed Ton $1000 D5 Water Cooled Centrifugal Chiller Ton $3000 D6 Water Cooled Positive Displacement or Reciprocatin $3000 D7 Uninterruptible Power Supply 20-100 kVA $1000 D8 Uninterruptible Power Supply gt 100 kVA $1000 D9 Mainframe Refresh $2000

D10 Server Refresh $2000 D11 PC Power Managment System $600 D12 HVAC System Optimization $005 D1 3 HoUCold Aisle Containment kWh saved $005 D14 Server Virtualization kW reduction $40000 D1 5 Thin Clients Units $500

efficient compared to the existing Mainframes power supply The replacement Mainframe if Inactive must be decommissioned and removed from the Data Center

Server Refresh Replacement servers must be ENERGY STARreg certified Replacement servers power supply must be 5 more efficiency compared to the power supply of the replaced servers The replaced server must be decommissioned and removed from the data center

HVAC System Optimization Final system must have these features

-Implementation of free cooling by the addition of an economizer system -Conversion of constant speed CRACCRAH into variable speed operations using VFDs and additional control functionalities and -Elevation of exhaust air temperature

HotCold Aisle Containment Includes both Hot and Cold Aisles Installing new containment measures not replacing already existed aisle containment Plenum-only installations not eligible Must result in higher difference between the return air (hot aisle) and supply air (cold aisle) temperatures measured at rack intake and exhaust locations

Server Virtualization Minimum of consolidating 5 Servers virtualized into one Server The virtualized servers if inactive are removed from the Data Center

Thin Clients Must be ENERGY STAR certified thin clients Decommissioned clients are removed from the Data Center

Data Center Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 43

Whole Building Systems Whole Building Systems Approach

The Whole Building Systems approach is intended to encourage integrated energy efficient designs by providing enhanced incentives to the customer who addresses overall energy performance Owners of eligible and qualifying new construction and major renovation projects can receive Whole Building Systems incentives when energy modeling indicates the projectrsquos performance is over 10 better than the ASHRAE 901-2007 Savings from eligible electric end-uses in kilowatt hours define the amount of financial incentive Energy savings achieved through renewable energy sources are not counted toward project energy savings and are not included in the savings basis Incentive reservations obtained during the design phase of a project will be honored for up to 24 months

How to Apply for Whole Building Systems Incentives Before construction begins bull A Pre-notification Application must be submitted documenting the Owners intention to

seek Whole Building Systems incentives bull The Owner must confirm the goals and energy efficiency strategies being pursued by the

design team on the completed Pre-notification Worksheet (Checklist tab) and in the project Summary (Whole Building Performance Summary tab)

bull Submit executable building modeling software files bull Submit the Whole Building Performance Summary worksheet energy simulation model

inputs and outputs and supporting documentation bull Receive confirmation and eligibility notification from the PECO Smart Ideas team and

receive an incentive reservation bull The final incentive paid may differ from the reserved incentive amount The final

incentive will be calculated based on site-verified equipment installation and performance The Owners final application and complete documentation must be received within 6 months of equipment installation or certificate of occupancy whichever is later

bull An executable energy model and model output demonstrating compliance with the criteria of ASHRAE 901-2007 Appendix G will be required and the equipment data sheets LED lighting fixtures must be on the DLC or Energy STAR qualified products list (QPL) to be eligible LED fixtures not on the DLC or Energy STAR QPL has the option of submitting LM79 and LM80 test reports for evaluation against DLC and Energy STAR eligibility criteria

During the construction period bull Owner and design team continue to work closely with their chosen contractor to assure

energy efficiency measures are included and installed in the completed building

When the building is constructed and operational bull Complete the Owner final application Request an equipment verification site visit by the

PECO Smart Ideas team Equipment must be installed and fully operational o Program staff will schedule a site visit and utilize submitted documentation and

measurement tools to verify that the installation follows the submitted energy simulation model

bull When PECO confirms that there are no significant changes to the installed equipment payment of the reserved incentive will be made to the Owner within 6 weeks

bull If changes from the proposed design energy simulation are found the Owner and design team will be notified of the reduced incentive amount a period of 20 calendar days will

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 44

Improvement Incentive per Sq Ft

over Code

~11 to lt20 $0155

~20 to lt30 $0233

~30 to lt40 $0350

~40 to lt60 $0525

~60 $0700

be allowed for supplemental information to be provided if no additional information is received by PECO Smart Ideas team the reduced incentive payments will be made and sent to the Owner if additional clarification and information is available program staff will work diligently to resolve the discrepancies and arrive at a reasonable incentive adjustment with the customer

Payments made by PECO Smart Ideas are final

Customer Eligibility The Owner of the proposed new building project must be a customer of PECO and receive delivery of electric service from PECO to receive kilowatt-hour based incentives Please note that electricity supply can be provided by any vendor

Project Eligibility bull The project must be a new construction or major renovation Major renovations involving

the removal and redesign of at least two building systems (such as interior lighting and mechanical systems) may apply for Whole Building Systems incentives

bull To qualify for incentives projects must demonstrate energy efficiency enhancements that achieve at least 11 improvement in the proposed design versus the standard baseline

bull The Owner must submit a Pre-approval Application to the program at the stage where changes for increased energy efficiency are still feasible and construction has not been completed

bull Projects receiving Whole Building Systems incentives are not eligible to receive other incentives such as the prescriptive or custom program incentives for the same scope

bull Project components that are NOT eligible for consideration as a basis for PECO Smart Ideas include the following o Alternative fuel sources (eg use of gas or oil equipment in lieu of electric) Please note

that combined heat and power (CHP) systems will be incentivized for the electricity they produce

o Renewable energy sources (eg solar wind biomass) bull Ineligible savings include exterior lighting process receptacle miscellaneous loads and

other unregulated end-uses Custom incentives are available for new construction exterior lighting

Whole Building Systems Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 45

Custom Project Specifications Instructions for Energy Savings Calculations for Custom Projects Custom projects must involve measures that result in a reduction in electric energy use (kWh) Electricity savings may result from either efficiency improvements or fuel switching Custom Incentives are based on the first year kilowatt-hour savings Custom applications must be accompanied by detailed engineering calculations that document the annual total energy savings

The following serve as guidelines for the minimum required documentation

Equipment Information Submittals bull A list of the present and proposed equipment and components to be installed

including manufacturerrsquos catalogmodel number bull Manufacturerrsquos specification sheets showing capacities and performance for all major

components

Energy Savings Calculations Provide calculations documenting the predicted energy consumption of the existing (or baseline) and proposed system using appropriate analytical tools and clearly stated assumptions Calculations may be performed by ldquohandrdquo but spreadsheet analysis or more rigorous modeling is preferred All analysis should be provided in electronic format All assumptions such as operating hours existing and proposed equipment operational details must be presented Engineering algorithms and procedures from recognized technical organizations such as ASHRAE SMACNA ANSI etc must be used Use rated performance factors tested under accepted procedures specified by recognized rating agencies such as AHRI ANSI ASTM etc Provide an explanation when equipment performance rating conditions vary from standard conditions

In support of the calculations extensive documentation must be provided that provides the basis for the savings estimates The documentation must provide information on the equipment operating schedule daily and seasonal load profile and baseline AND energy efficient equipment performance at the operating loads Typical documentation for custom projects often includes bull Engineering or architectural drawings and ldquoequipment schedulerdquo sheets bull Component specification sheets that include part load efficiency or performance

factors bull Spreadsheet calculations or inputoutput files and results from system modeling or

other engineering analysis using accepted engineering algorithms and practices bull Log sheets trend logs from a building management system or other operating

documentation that are often necessary to document operating hours and equipment loading and used as a basis for the calculations (in some cases short term monitoring may be required to document the load profile)

bull Control sequence of operations that are necessary where controls play a part in the savings equation

Additional documentation other than that described in the application may be required for program participation Larger projects may also require pre- and post-project sub metering or monitoring of loads andor power input as part of another measurement and verification activity to demonstrate the actual energy savings that are realized

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 46

Baseline for Custom Analysis Where equipment is replaced prior to the end of its rated service life in order to achieve energy savings the existing equipment performance may be used as the baseline in the energy savings calculations Where equipment is replaced due to failure or for other reasons (such as obsolescence or a need for more capacity) the baseline performance used in the savings calculation should be either the minimum performance that would be required by code for that equipment type and application (where a code applies) or the performance of the equipment that would have been selected as the customers standard practice when a code does not apply

Baseline or Existing System Summary On custom worksheet on application form include make model number name plate information (such as operating voltage and rated full load amps) rated capacity quantities equipment condition and age facility operating hours equipment operating schedule and load curves If needed attach separate sheets

All decisions regarding incentives for custom projects are in the sole discretion of PECO

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 47

APPENDIX PROGRAM UPDATES SUMMARY (Q1 2017) Multifamily Nursing Home and Assisted Living retrofit customers need to apply for incentives through the PECO Smart Ideas Multi-Family Program administered by Franklin Energy For more information please contact Taylor Adler at tadlerfranklinenergycom or call 1-844-4BIZ-SAVE Multifamily Nursing Home and Assisted Living new construction customers can proceed with applying for incentives here

Revised Incentives

Data Centers

Measure Incentive Effective Immediately Previous Incentive

Air-cooled chiller for data centers $40ton $10ton Air-cooled chiller without condenser for data centers $20ton $10ton

Computer room air conditioner $30ton $7ton Water-cooled centrifugal chiller for data centers $30ton $5ton Water-cooled positive displacement or reciprocating chiller for data centers

$30ton $5ton

Uninterruptible power supply 20-100 kVA $10kVA $6kVA Uninterruptible power supply gt100 kVA $10kVA $1kVA Mainframe refresh $20kW installed $5kW installed Server refresh $20kW installed $4kW installed Server virtualization $400kW reduction $4kW reduction Thin clients $5units $4units

Lighting (Effective Immediately)

Measure Incentive Effective Immediately Specification Previous

Incentive Specification

New construction exterior LED outdoor flood light LED parking garage and canopy lighting LED polearm mounted parking and roadway lighting LED wall mount fixture

$005kWh (custom)

Lighting Power Density (LPD) Requirements Unchanged

$10-54 fixture

Lighting Power Density (LPD) (Wft2) by Space Type or Building Area

LED Replacement Lamps (Tubes) 2

$250lamp 5 Min Watts Reduced

$250lamp 6 Min Watts Reduced

LED Replacement Lamps (Tubes) 4

$400lamp 10 Min Watts Reduced

$400lamp 12 Min Watts Reduced

Permanent Fixture Removal $010Watt removed

Clarification of calculation to represent actual Wattage removed

$010Watt removed

Lighting (Effective 6117)

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 48

Measure Incentive Effective 6117 Specification Previous

Incentive Previous Specification

Interior LED high-bay fixtures andor retrofit kits if lt 20000 LED Lumens

$50fixture 150 Min Watts Reduced

$75fixture 150 Min Watts Reduced

Interior LED high-bay fixtures andor retrofit kits if gt 20000 LED Lumens

$75fixture 225 Min Watts Reduced

$75fixture 150 Min Watts Reduced

New Incentives

Compressed Air

Measure New Incentive Effective Immediately Variable speed air compressor $30compressor HP Compressed air system optimization $50compressor HP

HVAC

Measure New Incentive Effective Immediately ECM circulation pump $50pump Retro-commissioning cooling systems $750ton Retro-commissioning whole building $010square foot Energy management system $25ton Demand controlled ventilation $25ton Water-cooled air conditioner $22ton

Food Service

Measure New Incentive Effective Immediately Combination oven $200unit ENERGY STARreg commercial convection oven $150unit ENERGY STARreg commercial fryers $100unit ENERGY STARreg commercial hot holding cabinet $200unit

Refrigeration

Measure New Incentive Effective Immediately Air-cooled refrigeration condenser $10ton Oversized condenser with VFD $10ton Case light occupancy controls $750door

Lighting

Measure New Incentive Effective Immediately Interior central lighting controls $00175sq foot

Motors and Drives

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 49

-

Measure New Incentive Effective Immediately VFD for dust collection system motor $50HP

Application Clarifications and Revised Requirements

Clarification of LED Eligibility for New Construction or Retrofit Projects

LED Eligibility is determined by whether lighting products are listed in either the DesignLights Consortium (DLC) Qualified Products List of commercial-grade LED luminaires or the US Environmental Protection Agency database of ENERGY STAR certified products For products not yet listed contractors may submit LM79 and LM80 test reports PECO Smart Ideas engineers will review test reports to determine if the product in question meets performance specifications

Revised W 9 Requirement

W-9 forms EIN numbers are no longer required

Deletion of erroneous statement in New Construction Lighting

The following statement from previous Business Manual has been deleted ldquoThe minimum lighting power density used to calculate the incentive shall be no lower than 50 of the ASHRAE 901-2007 valuerdquo

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 50

  • Commercial amp Industrial Program Application Manual
    • Follow This Easy Process
      • Pre-Approval Application Checklist
      • Final Application Checklist
          • Terms and Conditions
            • Program Effective Dates
            • Program and Project Eligibility
            • Incentive Payment Limits
            • Application Review Process
            • Inspections andor PUCrsquos Statewide Program Evaluation
            • Requirements for Custom Project Electricity Savings Calculation
            • Tax Liability
            • No Endorsement
            • Warranties
            • Limitation of Liability
            • Assignment
            • Customerrsquos Certification
            • Termination
            • Acknowledgement
              • Retrofit Lighting Solutions
                • General Linear Fluorescent Lamp and Ballast Specification Requirements
                • LED Lamps and Fixtures
                • Minimum Watts Reduced
                • Linear LED (Tubes)
                • Permanent Fixture Removal
                  • LED Traffic Signals
                    • LED Traffic Signals Incentive Table
                      • New Construction Lighting Specifications
                        • New Construction Lighting Incentives Table
                          • New Construction Lighting Power Density Code
                              • Exterior New Construction Lighting
                              • HVAC Equipment
                                • Air-Source Air Conditioners and Air-Source Heat Pumps
                                • Package Terminal Systems (Replacements)
                                • Ductless Mini-Split Heat Pump lt54 Tons
                                • Geothermal Heat Pump
                                  • Other HVAC Equipment
                                    • Hotel Guest Room Occupancy Sensor
                                    • ECM Circulation Fan
                                    • ECM Circulation Pump
                                    • Retrocomissioning Cooling Systems
                                    • Retrocomissioning Whole Building
                                    • Energy Management System
                                    • Demand Controlled Ventilation
                                    • Other HVAC Incentives Table
                                      • Unitary HVAC Chillers
                                        • Air-Cooled Chillers Water Cooled Positive Displacement Reciprocating Chillers and Water Cooled Centrifugal Chillers
                                          • Refrigeration
                                            • Anti-Sweat Heater Controls
                                            • Evaporator Fan Controls
                                            • Floating Head Pressure Controls
                                            • Automatic Door Closers for Walk-In Coolers and Freezers
                                            • EC Motor for Walk-inReach-in Refrigerated cases or Freezer cases
                                            • ENERGY STAR Solid Door Freezer and Glass Door Freezer and Refrigerators
                                            • Refrigeration Suction Pipe Insulation
                                            • Night Cover
                                            • Strip Curtain on Walk-In CoolerFreezer
                                            • Evaporator Coil Defrost Control
                                            • Variable Speed Refrigeration Compressor
                                            • Add Doors to Open Refrigerated Cases
                                            • Door Gaskets
                                            • Zero Energy Doors
                                            • Air Cooled Refrigeration Condenser
                                            • Oversized Condenser with VFD
                                            • Case Light Occupancy Controls
                                            • LED Open Case Lighting
                                            • LED Enclosed Case Lighting Refrigerated
                                            • LED Enclosed Case Lighting Freezer
                                              • Food Service
                                                • Beverage and Snack Machine Controls
                                                • ENERGY STARreg Refrigerated Beverage Vending Machines
                                                • ENERGY STARreg Electric Steam Cooker
                                                • ENERGY STARreg Electric Combination Oven
                                                • ENERGY STARreg Commercial Convection Oven
                                                • ENERGY STARreg Commercial Fryers
                                                • ENERGY STARreg Commercial Hot Holding Cabinet
                                                  • Motors and Variable Frequency Drives
                                                    • Early Replacement Motors
                                                    • Variable Frequency Drives on HVAC Fan Applications
                                                    • Variable Frequency Drives on Pump Applications
                                                    • Variable Speed Control for Kitchen Exhaust Hoods
                                                    • Variable Speed Drives for Process or Other Equipment
                                                      • Domestic Hot Water
                                                        • Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater
                                                        • Heat Pump Water Heater
                                                        • Low Flow Pre-Rinse Spray Valve
                                                        • Domestic Hot Water Incentive Table
                                                          • Compressed Air Systems
                                                            • No-loss Condensate Drain
                                                            • Air-Entraining air nozzle
                                                            • Storage Tanks for LoadNo Load Screw Compressors
                                                            • Cycling Refrigerated Thermal Mass Dryer
                                                            • Variable Speed Air Compressor
                                                            • Compressed Air System Optimization
                                                            • Compressed Air Systems Incentive Table
                                                              • Data Centers
                                                                • Air Cooled Chiller
                                                                • Air Cooled Chiller without Condenser
                                                                • Computer Room Air Conditioner
                                                                • Computer Room Air Handler Variable Speed
                                                                  • Replacing constant speed CRAH with VSD CRAH
                                                                    • Water Cooled Centrifugal Chiller
                                                                    • Water Cooled Positive Displacement or Reciprocating Chiller
                                                                    • Uninterruptible Power Supply
                                                                    • Mainframe Refresh
                                                                    • Server Refresh
                                                                      • Whole Building Systems
                                                                        • Whole Building Systems Approach
                                                                        • How to Apply for Whole Building Systems Incentives
                                                                        • Customer Eligibility
                                                                        • Project Eligibility
                                                                        • Whole Building Systems Incentives Table
                                                                          • Custom Project Specifications
                                                                            • Instructions for Energy Savings Calculations for Custom Projects
                                                                            • Equipment Information Submittals
                                                                            • Energy Savings Calculations
                                                                            • Baseline for Custom Analysis
                                                                            • Baseline or Existing System Summary

Terms and Conditions

PECO Energy Company (PECO) is offering prescriptive and custom incentives under the PECO Smart Ideas for Your Business to facilitate the implementation of cost-effective energy efficiency measures for commercial and industrial customers Any and all energy savings or environmental credits generated by the project described in this application will be retained by PECO

Funds are limited and subject to availability The program may be modified or terminated without prior notice

Program Effective Dates

The program is available until May 31 2021 The current cycle year runs from June 1 2016 through May 31 2017 (lsquoProgram Year Eightrsquo) Incentives are offered until approved funds are exhausted or until May 15 2021 whichever comes first All projects must be completed and the final applications received no later than May 15 2021 to be eligible for incentives

Program and Project Eligibility

Smart Ideas for Your Business incentives are available for the common energy efficiency measures listed in this Application Manual Program incentives are available under PECO Smart Ideas for Your Business to non-residential customers within PECOs service territory These incentives are available to all customers who pay into the Energy Efficiency Charge and receive their electricity over PECOrsquos distribution network regardless of the retail electric supplier

Most commercial projects involving energy savings are eligible Incentives are available for both prescriptive and custom measures Prescriptive measures are energy efficiency measures with pre-determined savings and incentive levels and are paid on a per unit basis These measures are available for specific Lighting HVAC Refrigeration and Food Service Variable SpeedFrequency Drives Compressed Air and Domestic Water Heater measures Custom measures include energy efficiency measures not listed on the prescriptive application forms Custom incentives must be approved by PECO in advance are determined on a case-by-case basis and are paid per unit of energy (kWh) saved Examples of projects that are NOT eligible for PECO Smart Ideas for Your Business include onndashsite electricity generation projects focused primarily on power factor improvement and renewable energy projects

Installation must be at the customerrsquos facility and provide 100 of the energy benefits as stated in the application for a period of five years or for the life of the product whichever is less PECO has the right to claim a pro-rated amount of any incentive paid if the customer ceases to be a distribution customer of PECO or removes the equipment or systems at any time during the five-year period or the life of the measure

Incentive Payment Limits

Prescriptive and custom incentives cannot exceed 100 of the customerrsquos total costs Contractor labor costs can be considered in the total project cost while customer internal labor costs cannot

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 7

Application Review Process

Pre-approval is required for all projects A pre-approval application must be submitted before you purchase equipment or technology for which the incentive is being requested Pre-approval is not a guarantee of program acceptance Completed applications will be reviewed in the order received The location or business name on the invoice must be the same as the application information The incentive is reserved for the project when PECO receives a complete preshyapproval application and determines that the project meets the program eligibility requirements Applicants who submit incomplete applications will be notified of deficiencies upon review of the application and could lose their place in line in the review process until all requested information is received Applicants are encouraged to call the program hotline if they have any questions about documentation requirements

PECO will review final applications for eligibility and completeness The final application and all required supporting documentation must be received within 90 days of project completion but no later than May 15 2021 to be eligible for incentives Project documentation including original dated invoices for the purchase and installation of the measures andor product specification sheets is required

The project invoice must provide sufficient detail to separate the project cost from the cost of other services such as repairs and building code compliance PECO reserves the right to request additional supporting documentation necessary to ensure measure eligibility and verify that the expected energy savings will occur Requested information may include but is not limited to equipment purchase dates installation dates proof that the equipment is operational manufacturer specifications warranty information and proof of customer co-payment PECO will make every effort to maintain the confidentiality of customer information except that such information must be provided to the PA PUC and its contractor as well as PECOrsquos contractor for measurement and evaluation

The installed measures are not eligible for incentives from other PA Act 129 Phase 3 Energy Efficiency Programs

Inspections andor PUCrsquos Statewide Program Evaluation

PECO its agents measurement and verification contractor andor the PUC statewide program evaluator have the right to audit or inspect all projects to verify compliance with the program rules and verify the accuracy of project documentation This may include pre-installation andor post-installation inspections detailed lighting layout descriptions metering data collection interviews and utility bill data analyses The customer must allow access to project documents and the facility where the measures were installed for a period of five years after receipt of incentive payment by PECO

Requirements for Custom Project Electricity Savings Calculation

The annual electricity savings must be calculated for custom projects using industry accepted engineering algorithms or simulation models The applicant must estimate the annual electricity usage of both the existing and proposed equipment based on the current operation of the facility If the existing equipment is at the end of its rated useful life the applicant must substitute equipment that would meet the applicable federal and local energy codes as the baseline when calculating the annual energy savings The applicant must be able to clearly describe the method used to calculate the savings The applicant must provide all assumptions used in the calculations and document the source for these assumptions Further information on custom measures can be found in the Application Manual which can be downloaded from

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 8

wwwpecocomsmartideasThe method and assumptions used by the applicant to calculate the annual savings will be reviewed by PECO PECO has sole and final determination of the annual energy savings to be used in calculating the incentive amount PECO also reserves the right to require specific measurement and verification activities including monitoring both before and after the retrofit and to base the incentive payment on the results of these activities

PECO may need to conduct inspections both before and after the retrofit projects to verify equipment and operation conditions Pre-approval application must be submitted while the existing equipment is still in operation in order to allow PECO the opportunity to view the existing equipment

Tax Liability

Incentives may be taxable for most taxpayers If the incentive is more than $600 it will be reported to the IRS and the customer will be provided with an IRS form 1099 unless the customer is exempt PECO is not responsible for any tax liability that may be imposed on any customer as a result of the payment of program incentives All customers must supply their Federal Tax Identification number to PECO in order to receive a Program Incentive Please consult with your tax professional for information on the tax treatment of the incentives

No Endorsement

PECO does not endorse support or recommend any particular manufacturer product or system design in promoting this program and PECO does not guarantee any specific level of energy savings with respect to any product system design or energy efficiency measure

Warranties

PECO DOES NOT WARRANT THE PERFORMANCE OF INSTALLED EQUIPMENT ANDOR SERVICES RENDERED AS PART OF THIS PROGRAM EITHER EXPRESSLY OR IMPLICITLY NO WARRANTIES OR REPRESENTATIONS OF ANY KIND WHETHER STATUTORY EXPRESSEDOR IMPLIED INCLUDING WITHOUT LIMITATIONS WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE REGARDING EQUIPMENT OR SERVICES PROVIDED BY A MANUFACTURER OR VENDOR CONTACT YOUR VENDORSERVICES PROVIDER FOR DETAILS REGARDING PERFORMANCE AND WARRANTIES

Limitation of Liability

By virtue of participating in this program customers agree to waive any and all claims or damages against PECO except the receipt of the program incentive if eligible Participating Customers agree that PECOrsquos liability in connection with this program is limited to paying the program incentive specified Under no circumstances shall PECO its representatives agents or subcontractors be liable for any lost profits special punitive consequential or incidental damages or for any other damages or claims connected with or resulting from participation in this program

Assignment

Customers may assign a portion or all of their program incentive payment to a specified vendor

Customerrsquos Certification Customer certifies that heshe purchased and installed the equipment listed in the application Customer agrees that all information is true and that heshe has conformed to all of the program and equipment requirements listed in the application

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 9

Termination

PECO reserves the right to extend modify (this includes modification of program incentive levels) or terminate this program without prior or further notice

Acknowledgement

I have read understood and am in compliance with all rules and regulations concerning this incentive program I certify that all information provided is correct to the best of my knowledge and I give PECO permission to share my records with the Pennsylvania PUC and agents representatives and contractors it selects to manage coordinate or evaluate the program Additionally I hereby authorize PECO to have reasonable access to my property to inspect the installation and performance of the equipment and installations that are eligible for incentives under the guidelines of the program

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 10

Retrofit Lighting Solutions

General Linear Fluorescent Lamp and Ballast Specification Requirements 32w 4ft HPT8 and reduced wattage T8 lamps must be listed on the Consortium of Energy Efficiency (CEE) product list or must meet CEE standards For further information visit wwwcee1org

LED Lamps and Fixtures The integral lamp or fixture must appear on the Energy Star Qualified Products List or the Design Lights Consortium Qualified Products List

bull Energy Star Qualified Fixture Product List httpwwwenergystargov bull Energy Star Qualified Integral LED lamps httpwwwenergystargov bull Design Lights Qualified Product List httpwwwdesignlightsorg

Minimum Watts Reduced Energy efficient fixtureslamps are required to be lower in load than existing fixtureslamps by specified levels the Minimum Watts Reduced Each lighting measure has its own Minimum Watts Reduced that must be met as eligibility requirement These levels are listed in the lighting worksheet ldquoLighting Incentives Tablersquo tab and reproduced below

Linear LED (Tubes) Linear LED lamps must be listed on the Design LightsTM Consortium (DLC) Qualified Products List

Type A LEDs bull Type A LED linear lamps are powered by a fluorescent ballast bull If present existing magnetic ballast must be removed and replaced with a compatible energy- efficient electronic ballast bull DLC Primary Use Requirement ndash DLC-listed equipment must be classified with one of the following Primary Use designations

o Replacement Lamps (Plug and Play) (UL Type A) bull Label must be affixed to the interior of fixture in a prominent location Label should indicate that the fixture has been retrofitted with

TLEDs and that fluorescent lamps should not be installed as replacements

Type B LEDs bull Type B LED tubes are powered by an internal driver bull Existing fluorescent ballast must be removed and fixturersquos incoming power wires are connected directly to the lamp sockets Strict

adherence to installation instructions is critical when rewiring existing fixtures

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 11

bull The LED linear lamps must be delivered as part of a UL 1598C Classified Luminaire Retrofit Kit with instructions explaining the LED linear lamps must be installed on a luminaire that is already UL Listed

bull The retrofitted luminaire must be clearly identified using the label included with the Retrofit Kit indicating that the luminaire has been modified and can no longer operate the originally intended fluorescent lamp(s)

Type C LEDs

bull Type C LED linear lamps are powered by an external driver bull Existing fluorescent ballast must be removed and replaced with a compatible external driver bull DLC Primary Use Requirement ndash DLC-listed equipment must be classified with one of the following Primary Use designations

o 2-lamp External Driver Lamp-Style Retrofit Kits (UL Type C) o 3-lamp External Driver Style Retrofit Kits (UL Type C) o 4-lamp External Driver Lamp-Style Retrofit Kits (UL Type C)

bull Technical specifications (manufacturerrsquos cut sheet) for the driver must be submitted with the application

Permanent Fixture Removal This measure is to be used only in conjunction with lighting retrofits and is intended for spaces that are currently over lit Incentives are paid $010watt reduced only on fixtures removed not on total watts reduced for entire projects Overall net lumen reduction must be achieved in order to qualify for a permanent fixture removal incentive

Example

(20) Existing fixtures at 10000 lumens each = 200000 lumens

(14) Proposed fixtures at 15000 lumens each = 210000 lumens

Since there is not a net reduction in lumens the six fixtures removed would not be eligible for a permanent fixture removal incentive

It is encouraged that spaces meet recommended foot-candle levels as detailed by IESNA Lighting Design Guide A Program Engineer will evaluate lumens reduction based on the type of fixtures removed and the DLC lumens rating of the fixtures installed

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 12

RETROFIT INTERIOR LIGHTING TABLE

Measure Code

Min Measure Name Watts Incentive Unit

Reduced Technical Specifications

CFL Lighting

CFL1A ENERGY STAR Hard-Wired CFL fixture Indoor AccentTrack 20 $250 lamp

Only complete new fixtures or modular hardwired retrofits with hardwired electronic ballasts qualify

CFL ballast must be programmed start or programmed rapid start with a power factor (PF) ge 090 and a total

harmonic distortion (THD) le 20 Screw-in CFLs are not eligible for this incentive

CFL1B ENERGY STAR Hard-Wired CFL fixture Indoor Directional WallCeiling Mount 20 $250 lamp

CFL1C ENERGY STAR Hard-Wired CFL fixture Indoor Omni-Directional WallCeiling Mount 20 $250 lamp

CFL2A ENERGY STAR Hard-Wired CFL fixture Indoor Portable LampTorchiere 20 $1 lamp

CFL2B ENERGY STAR Hard-Wired CFL fixture Indoor Recessed Downlight 20 $1 lamp

CFL2C ENERGY STAR Hard-Wired CFL fixture Indoor Recessed Downlight Retrofit Module 20 $1 lamp

CFL2D ENERGY STAR Hard-Wired CFL fixture Indoor Under CabinetStrip 20 $1 lamp

CFL3A ENERGY STAR Hard-Wired CFL fixture Outdoor Directional WallCeilingGroundPole Mount 30 $3 lamp

CFL3B ENERGY STAR Hard-Wired CFL fixture Outdoor Omni-Directional WallCeilingGroundPole Mount 30 $3 lamp

CFL3C ENERGY STAR Hard-Wired CFL fixture Outdoor Recessed Downlight 30 $3 lamp

CFL3D ENERGY STAR Hard-Wired CFL fixture Outdoor Recessed Downlight Retrofit Module 30 $3 lamp

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 13

Fluorescent Lighting FL1 Interior T5 New Fluorescent Fixture w Electronic Ballast 11 $5 fixture Any T5 is eligible

FL2 T5HO High-Bay Fixture 54 $25 fixture Fixture efficiency must be gt 90

High bay fixtures must be installed at least 15ft above finished floor

FL3 HPT8 High-Bay Fixture 82 $20 fixture Must use High Ballast Factor (gt96) Fixture efficiency must be gt= 85

High bay fixtures must be installed at least 15ft above finished floor

FL4 HPT8 Fixture 20 $5 fixture Must use Low Ballast Factor (lt80)

FL5 RW T8 Lamp - Lamp only 10 $3 lamp Existing T8 fixture re-ballasting to a higher ballast factor are not eligible

HID Measures HID1 Ceramic HID - 25 -39 Watt 95 $13 fixture

Replacing higher wattage HID or High Pressure Sodium or Mercury Vapor

Interior replacements only

HID2 Ceramic HID - 70 Watt 155 $13 fixture HID3 Ceramic HID - 100 Watt 170 $15 fixture HID4 Pulse Start HID - 150 nominal Watts 72 $10 fixture HID5 Pulse Start HID - 350 nominal Watts 100 $13 fixture

HID6 Pulse Start HID - 1000 nominal Watts 400 $15 fixture

Interior LED Fixtures

LED1 ENERGY STAR Integral LED fixture Indoor Recessed Downlight Retrofit Module 38 $7 fixture Retrofit module of existing recessed fixture

LED2 ENERGY STAR Integral LED fixture Indoor Recessed Downlight 38 $7 fixture

New indoor recessed downlight fixture LED3 ENERGY STAR Integral LED fixture Indoor Portable LampTorchiere 30 $7 fixture

LED4 LED AccentTrack Lighting Fixtures 32 $6 head

LED5 LED Low-Bay Fixtures 150 $20 fixture For replacement of HID fixtures mounted le 15 above finished floor

LED6 LED Low-Bay Retrofit Kits 150 $20 fixture

LED8 LED Troffer Fixtures and Retrofit Kits 5 $10 fixture Troffers typically installed in lay-in ceilings 2x2 2x4 configuration

LED9 LED Surface and Suspended Linear Fixtures 25 $10 fixture Examples of LED surface-mounted luminaires include wrap vapor tight and strip fixtures (non-cooler)

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 14

-

Interior LED High Bay Fixtures

LED10A LED High-Bay Fixtures le 20000 LED lumens 150 $50 fixture

High bay fixtures must be installed at least 15ft above finished floor

LED10B LED High-Bay Fixtures gt 20000 LED lumens 225 $75 fixture

LED11A LED High-Bay Retrofit Kits le 20000 LED lumens 150 $50 fixture

LED11B LED High-Bay Retrofit Kits gt20000 LED lumens 225 $75 fixture

LED Parking Garage and Canopy Fixtures

LED12 LED Parking Garage and Canopy Fixtures and Retrofit Kits Outdoor lt= 5000 LED lumens 50 $15 fixture

Fixtures must be physically installed in a parking garage (area where vehicles are physically parked) or

fuel pump canopy Typically represents replacement of le175 W Metal

Halide or equivalent

LED13 LED Parking Garage and Canopy Fixtures and Retrofit Kits Outdoor 5001 - 10000 LED lumens 70 $30 fixture

Typically represents replacement of Metal Halide or equivalent greater than 175W and less than 400W

Product must be installed in a parking garage (area where vehicles are physically parked) or fuel pump

canopy

LED14 LED Parking Garage and Canopy Fixtures and Retrofit Kits Outdoor gt 10000 LED lumens 150 $50 fixture

Typically represents replacement of ge400 W Metal Halide or equivalent

Product must be physically installed in a parking garage (area where vehicles are physically parked) or

fuel pump canopy LED Screw in Lamps

ESLED1 ENERGY STAR Screw-in LED Bulb (Decorative Globe) 14 $5 lamp Lamp with globe shape such as type G

ESLED2 ENERGY STAR Screw-in LED Bulb (Decorative non-globe 14 $5 lamp Lamps with non-globe or candle-like shape such as type B C CA F

ESLED3 ENERGY STAR Screw-in LED Bulb and Low Voltage Mini-Reflector Bulbs (DirectionalReflector) 14 $5 lamp ANSI standard PAR and MR type lamps

ESLED4 ENERGY STAR Screw-in LED Bulb (Standard) 14 $5 lamp Lamp such as A series

ESLED5 ENERGY STAR Screw-in LED Bulb (Standard 3-Way) 14 $5 lamp Lamp such as A series with three light levels

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 15

- -LED Screw in Lamps Smart Bulbs

ESLED6 ENERGY STAR Screw-in LED Bulb (Decorative Globe Smart Bulb) 14 $5 lamp Lamp with globe shape such as type G

ESLED7 ENERGY STAR Screw-in LED Bulb (Decorative non-globe Smart Bulb) 14 $5 lamp Lamps with non-globe or candle-like shape such as

type B C CA F

ESLED8 ENERGY STAR Screw-in LED Bulb (DirectionalReflector Smart Bulb) 14 $5 lamp ANSI standard PAR lamps

ESLED9 ENERGY STAR Screw-in LED Bulb (Standard Smart Bulb) 14 $5 lamp Lamp such as A series

LED Tubes (replacing fluorescent)

TLED1 LED Replacement Lamps (Tubes) 2 5 $250 lamp Refer to Lighting Technical Specifications for requirements DLC Type A B and C are eligible bullType B linear (Interior driver) LEDs have the following installation requirements

bullExisting fluorescent ballast must be removed and fixturersquos incoming power wires are connected directly to the lamp sockets Strict adherence to installation instructions is critical when rewiring existing fixtures bullThe LED linear lamps must be delivered as part of a UL 1598C Classified Luminaire Retrofit Kit with instructions explaining the LED linear lamps must be installed on a luminaire that is already UL Listed bullThe retrofitted luminaire must be clearly identified using the label included with the Retrofit Kit indicating that the luminaire has been modified and can no longer operate the originally intended fluorescent lamp(s)

TLED2 LED Replacement Lamps (Tubes) 4 10 $4 lamp

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 16

LED Exterior Lighting

ELED1 ENERGY STAR Integral LED fixture Outdoor Recessed Downlight Retrofit Module 24 $10 module

ENERGY STAR or DLC Qualified fixtures ELED2 ENERGY STAR Integral LED fixture Outdoor Recessed

Downlight 24 $10 fixture

ELED3 LED Outdoor Flood Light Fixtures lt= 5000 LED lumens 50 $10 fixture Typically represents replacement of le175 W Metal Halide or equivalent Fixtures must be DLC qualified

ELED4 LED Outdoor Flood Light Fixtures gt 5000 LED lumens 70 $15 fixture Typically represents replacement of Metal Halide or equivalent greater than 175W Fixtures must be DLC qualified

ELED5 LED PoleArm Mounted Parking and Roadway Fixtures and Retrofit Kits lt= 5000 LED lumens 50 $25 fixture Typically represents replacement of le175 W Metal

Halide or equivalent Product must be DLC qualified

ELED6 LED PoleArm Mounted Parking and Roadway Fixtures and Retrofit Kits Outdoor gt 10000 LED lumens 150 $75 fixture

Typically represents replacement of Metal Halide or equivalent greater than 400W Product must be DLC

listed

ELED7 LED PoleArm Mounted Parking and Roadway Fixtures and Retrofit Kits Outdoor 5001 - 10000 LED lumens 70 $50 fixture

Typically represents replacement of Metal Halide or equivalent greater than 175W and less than 400W

Product must be DLC listed

ELED8 LED Wall Mount Fixtures and Retrofit Kits Outdoor lt= 5000 LED lumens 50 $25 fixture Typically represents replacement of le175 W Metal

Halide or equivalent Product must be DLC qualified

ELED9 LED Wall Mount Fixtures and Retrofit Kits Outdoor gt 5000 LED lumens 70 $50 fixture

Typically represents replacement of Metal Halide or equivalent greater than 175W Product must be DLC

qualified Permanent Fixture Removal

PFRA Indoor Permanent Fixture Removal combined with lighting retrofit na $010 watt removed Incentive only valid when units = ldquofixturerdquo in this table

Incentive is only offered when net lumens are reduced PFRB Outdoor Permanent Fixture Removal combined with lighting retrofit na $010 watt removed

Other LED Lighting LEDEXIT LED Exit Sign

na

$2 sign Replacing Incandescent or Fluorescent

SIGN1A Indoor LED Channel Signage $8 letter

Replacing Neon SIGN1B Outdoor LED Channel Signage $8 letter

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 17

Lighting Controls

CTL Unitary Sensor Controls

na

$1500 sensor

Passive infrared ultrasonic detectors are eligible Includes daylighting controls and all occupancy controls

Controls can be onoff stepped or continuous (dimming) Daylight sensor controls are required to be commissioned in order to ensure proper sensor calibration and energy savings

Minimum of 30 watts controlled per control

CLC Interior Central Lighting Controls $00175

square foot of area

under control

Automated central lighting control systems with override capabilities

This measure includes centrally-controlled time clocks wireless on off switches bi level switches computer based

controls pre-set scene selection dimmable ballasts and on-off dimmer switches for non-personal tuning

Floor plan must be submitted verifying square footage

DAYOCC Controls Combination - Daylighting and Occupancy Fixture Mounted $1500 sensor Minimum of 30 watts controlled per control

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 18

LED Traffic SignalsThis measure applies to the early replacement of existing incandescent traffic lights and pedestrian signals with LEDs New LED traffic signals must comply with ENERGY STAR requirements which can be found at httpswwwenergystargoviapartnersproduct_specseligibilitytraffic_eligpdf98bfshy1786

LED Traffic Signals Incentive Table

Round Traffic Signals 8 Red

Incentive per Signal

$15

8 Yellow 8 Green 12 Red

12 Yellow 12 Green

Turn Arrow Signals

8 Red

$13

8 Yellow 8 Green 12 Red

12 Yellow 12 Green

Pedestrian Signals

9 Pedestrian Only

$13

12 Hand Only 12 Pedestrian Only 12 Countdown Only

12 Pedestrian and Hand Overlay 16 Pedestrian and Hand Side by

Side 16 Pedestrian and Hand Overlay

16 Hand and Countdown Side-by-Side

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 19

Lighting Controls that Exceed Code Requirements

New Construction Lighting SpecificationsUnder the Lighting Power Density Approach the lighting power installed is compared with the lighting power allowed by code Incentives are available for systems where the installed lighting power is lower than the code-allowed power by at least 10 Savings are based on the Lighting Power Density (LPD) calculated on a watts per square foot basis Incentives will be paid only on the area of the building where the lighting installation is complete and is ready for occupancy If a portion of a building is not built-out such that the lighting in an area is not complete and ready for occupancy then that portion is not eligible for an incentive Baseline lighting power density is based on ASHRAE 901- 2007 Either the Space-by-Space or Building Area method may be used to calculate the LPD for the purposes of the incentive

Required Documentation bull Lighting Worksheet bull COMcheck Interior Lighting Report or equivalent analysis demonstrating space-byshy

space or building area calculations bull Reflected ceiling plans and electrical plan sheets showing lighting fixture layout bull Lighting fixture schedule sheet including fixture counts bull Fixture submittal or specification sheets showing model number and rated fixture wattage bull Architectural floor plans displaying floor area affected by proposed lighting installation

New Construction Lighting Incentives Table Lighting Wattssq ft

Improvement over of Code Incentive

gt= 10 and lt 20 $0035sq gt= 20 and lt 30 $007sq ft gt= 30 and lt 40 $0105sq

gt= 40 $021 sq ft

Incentives will be paid on a ($005kWh) custom basis Please contact Program Staff for eligibility of lighting controls for New Construction projects

Interior Occupancy Sensors Incentives are offered for occupancy-based controls in areas where they are not required by code Passive infrared ultrasonic detectors and fixture-integrated sensors or sensors with a combination sensor are eligible All sensors must be hard-wired and control interior lighting fixtures The incentive is per Watt controlled An inventory of the controlled fixtures and their wattage must be provided for each sensor with the Final Application

Daylight Dimming System Incentives are offered for daylight sensor controls in spaces with suitable available ambient light for at least part of the day Light may be through skylights clerestories windows or ldquolight tubesrdquo The controls can be onoff stepped or continuous dimming The onoff controller should turn off artificial lighting when the interior illuminance meets the desired indoor lighting level The stepped controller generally dims the artificial lighting 50 when the interior illuminance levels reach 50 of the desired lighting levels Continuous or dimming controllers dim artificial lighting proportionally to the available ambient light All types of daylight sensor controls are required to be commissioned in order to ensure proper sensor calibration and energy savings

Required Documentation bull Cut sheets or submittals of lighting control systems Reflected ceiling plans or schedule

showing which fixtures are controlled by lighting controls

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 20

New Construction Lighting Power Density CodeRequirements ndash Space by Space Method

Building Specific Space Types LPD (Wft2) Building Specific Space Types LPD (Wft2)

GymnasiumExercise Center AutomotivemdashServiceRepair 07

Playing Area 14 Manufacturing

Exercise Area 09 Low (lt25 ft Floor to Ceiling Height) 12

CourthousePolice StationPenitentiary High (gt25 ft Floor to Ceiling Height) 17

Courtroom 19 Detailed Manufacturing 21

Confinement Cells 09 Equipment Room 12

Judges Chambers 13 Control Room 05

Fire Stations HotelMotel Guest Rooms 11 Fire Station Engine Room 08 DormitorymdashLiving Quarters 11

Sleeping Quarters 03 Museum

Post Office-Sorting Area 12 General Exhibition 10 Convention Center-Exhibit Space 13 Restoration 17

Library BankOfficemdashBanking Activity Area 15 Card File and Cataloging 11 Religious Buildings

Stacks 17 Worship Pulpit Choir 24

Reading Area 12 Fellowship Hall 09

Hospital Retail

Emergency 27 Sales Area [For accent lighting see 93121(c)] 17

Recovery 08 Mall Concourse 17

Nurse Station 10 Sports Arena

ExamTreatment 15 Ring Sports Area 27

Pharmacy 12 Court Sports Area 23

Patient Room 07 Indoor Playing Field Area 14

Operating Room 22 Warehouse

Nursery 06 Fine Material Storage 14

Medical Supply 14 MediumBulky Material Storage 09

Physical Therapy 09 Parking GaragemdashGarage Area 02

Radiology 04 Transportation

LaundrymdashWashing 06 AirportmdashConcourse 06

AirTrainBusmdashBaggage Area 10

TerminalmdashTicket Counter 15

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 21

New Construction Lighting Power Density CodeRequirements ndash Building Area Method

Building Area Type 221 LPD (Wft2)

Automotive facility 09

Convention center 12

Courthouse 12

Dining bar loungeleisure 13

Dining cafeteriafast food 14

Dining family 16

Dormitory 1

Exercise center 1

Gymnasium 11

Health-care clinic 1

Hospital 12

Hotel 1

Library 13

Manufacturing facility 13

Motel 1

Motion picture theater 12

Building Area Type LPD (Wft2)

Multifamily 07

Museum 11

Office 1

Parking garage 03

Penitentiary 1

Performing arts theater 16

Policefire station 1

Post office 11

Religious building 13

Retail 15

Schooluniversity 12

Sports arena 11

Town hall 11

Transportation 1

Warehouse 08

Workshop 14

221 In cases where both a common space type and a building specific type are listed the building specific space type shall apply

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 22

Exterior New Construction LightingExterior New Construction savings over code lighting power density will be incentivized using custom lighting measure at $005kWh rate Participants must submit exterior lighting plans Submittals COMCHECK REPORT and lighting schedule for exterior lighting Savings are calculated from the LPD (Wsq ft) indicated below Additional information may be required based on the building exterior type and space description indicated below To contribute to incentive LEDs must satisfy program requirements for DLC Energy Star or equivalent listing

Required Documentation bull COMcheck Interior Lighting Report or equivalent analysis demonstrating space-by-space or

building area calculations bull Drawings showing lighting fixture layout bull Lighting fixture schedule sheet including fixture counts bull Fixture submittal or specification sheets showing model number and rated fixture wattage

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 23

Building Exterior Space Description LPD

Unco erect Pariki Ilg Area Parlurng ots arnd Drives 0 15 WfW

B i ing Grournds W al 1Yays lless Hlan 11] e 10 Wltirneru- 00

W a Nays 10 middot de or greater 112 W

Plaza a reas

Spec rest re areas

Stainh1ays 1ow 2

B i ing 8ntrames and Exits Ma efilbies m wr near foot of door width

Other doors 2o w 1r ear foot of door width

Ctmqpies and Overhimgs Free starndillg and a ched tmd 12s w m2 m bullerhangs

0 door sales Op en areas (ind udi Ilg ve id e sales 05 W lo )

street frontage far vehicle sales lots 21] W linear toot in addi middot on to open are-0bullmiddot lo~nce

B i ing facades 0 2 W tfl2 middot or eacil illumirnated N311 or surface

o r 5 0 Wllinear root fo r eac h m n inated N3l1 o r

surface length

Automated te lle r rnachmiddot es a lld 210 W per loca tion plus 91] night deposito liies W 1pernddiliorml A I middot per

1oca middot om

Eirltrances and gatehouse inspecliion 125 W ffl2 o middot uncovered slatiaBS a goo~ ed acir ies area

Load ing are-0s or law enforcement 0 5 W 2 of u rnco1bullered area fire ambu rnce and otiher emergency service ibullehmiddotctes

Drive-through w indOWs a taslrood 400 W per drive-Hlrough restaurants

Parking near 24 -h our retail 80111 W per main entry entmn ces

HVAC Equipment Air-Source Air Conditioners and Air-Source Heat Pumps New unitary air conditioning units or air source heat pumps that meet or exceed the qualifying cooling efficiency shown in the HVAC Incentives Worksheet are eligible for an incentive They can be either split systems or single package units The efficiency of split systems is based on an ARI reference number All packaged and split system cooling equipment must meet Air Conditioning and Refrigeration Institute (ARI) standards (210240 320 or 340360) be UL listed use a minimum ozone-depleting refrigerant (eg HCFC or HFC) All required efficiencies are based on the Consortium for Energy Efficiency (CEE) high-efficiency commercial air conditioning and heat pump specifications (wwwcee1org) A manufacturerrsquos specification sheet indicating the system efficiency must accompany the application Disposal of the existing unit

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 24

must comply with local codes and ordinances

Package Terminal Systems (Replacements) Package terminal air conditioners and packaged terminal heat pumps are through-the-wall self-contained units that are 2 tons (24000 Btuh) or less All EER values must be rated at 95degF outdoor dry-bulb temperature

Ductless Mini-Split Heat Pump lt54 Tons Incentives are offered for Ductless Mini-Split Heat Pump lt54 Tons with SEER rating greater than or equal to 120 and EER greater than or equal to 145 and HSPF greater than or equal to 90

Geothermal Heat Pump Geothermal equipment is a high-efficiency groundwater source water source or ground source heat pump system that meets or exceeds the energy efficiency requirements shown in the tables below These measures do not apply to heat pump systems coupled with non-heat pump systems such as chillers rooftop AC units boilers or cooling towers which must be filed as custom measures All HVAC applications other than comfort cooling and heating such as process cooling must also be applied for as custom measures

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 25

HVAC Heating Qualifying Incentive

Equipment Type and Cooling Capacity Cooling Qualifying Efficiency ($ per cooling Measure Code Efficiency

ton)

Air Cooled Air Conditioner

H01 lt 54 tons (lt 65000 Btuhr) 15 SEER NA $22

H02 lt 54 and lt 11 25 tons

125 IEER $22 (lt 65 000 Btuh and lt 135 000 Btuhr) NA

H03 lt11 25 and lt 20 tons

123 IEER NA $22 (lt 135000 Btuh and lt 240000 Btuhr)

H04 lt 20 and lt 6333 tons (~

11 1 IEER NA $22 240000 Btuh and lt 760000 Btuhr)

HOS ~ 6333 Ions (~ 760000 Btuhr) 103 IEER NA $22

Air Cooled Heat Pumps

H06 lt 54 tons (lt 65000 Btuhr) 143 SEER 87 HSPF $30

H07 lt 54 and lt 11 25 tons

123 IEER 3 3 COP $30 (lt 65000 Btuh and lt 135000 Btuhr)

HOS lt11 25 and lt 20 tons

1U IEER 3 2 COP $30 (lt 135000 Btuh and lt 240000 Btuhr)

H09 lt 2000 tons (240000 Btuhr) 105 IEER 3 2 COP $30

Packaged Terminal Systems (PTAC and PTHP) (PTHP only)

H10 lt 8000 Btuhr (lt066 tons) 11 8 EER 33 $17

H11 ~8000 and lt10500 Btuhr (~066 and lt 0875 tons) 11 4 EER 32 $17

H12 gt10500 Btuhr ( 875 tons) 107 EER 31 $17

H22 lt 54 tons (lt 65000 Btuhr) 121 EER 12 3 IEER NA $22

lt 54 and lt 11 25 tons 121 EER 12 3 IEER $22 H23

(lt 65000 Btuh and lt 135000 Btuhr) NA

H24 lt11 25 and lt 20 tons

120 EER 12 2 IEER $22 (lt 135000 Btuh and lt 240000 Btuhr) NA

H25 lt20 and lt 633 tons

119 EER 12 2 IEER $22 (lt 240000 Btuh and lt 760000 Btuhr) NA

H26 ~ 633 tons( lt760000 Btuhr) 110 EER 11 1 IEER NA

$22

HVAC Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 26

Other HVAC EquipmentHotel Guest Room Occupancy Sensor Incentives are offered for occupancy-based controls that control electric air conditioning air source heat pumps and or electric heating units for individual hotel rooms Systems with nonshyelectric heat are not eligible Sensors must be controlled by automatic occupancy detectors or a key-card system and the default setting for controlled units differ by at least 5 degrees (or shut the unit fan and heating or cooling off completely) from the operating set point during unshyoccupied periods The control system may also be tied into other electric loads such as lighting and plug loads to shut them off when occupancy is not sensed The incentive is per room Replacement or upgrades of existing occupancy-based controls are not eligible as a prescriptive incentive

Economizer Integrated Dual Enthalpy Economizer ControlsThis measure is targeted to non-residential establishments whose HVAC equipment is not equipped with a functional economizer

Circulation Fan High-Volume Low-SpeedFans must be greater than 16 feet in diameter and have variable speed control

ECM Circulation Fan This measure is targeted to non-residential customers whose air handling equipment currently uses a SP or PSC fan motor rather than an ECM This measure applies only to circulating fan motors of 1 HP or less Above 1 HP motors are governed by NEMA standards and would see little to no efficiency benefit by adding an ECM The targeted fan can supply heating or cooling only or both heating and cooling

ECM Circulation Pump This measure is targeted for replacement of a shaded pole or permanent split capacitor pump or motor with an electronically commutated pump or motor le75 HP

Retrocomissioning Cooling Systems Confined to chiller plant andor isolated packaged units For reservation must contain proposal with defined scope at equipment level that demonstrates energy savings For final approval required final commissioning report including raw data (TAB reports) demonstrating actual scope

This prescriptive measure can be used for facilities with maximum cooling demand less than 1687 tons Larger systems require the use of custom HVAC measure

Retrocomissioning Whole Building Covers all relevant major mechanical systems such as chiller plant air side systems compressed air andor process systems For reservation must contain proposal with defined scope at equipment level that demonstrates energy savings For final approval required final commissioning report including raw data (TAB reports) demonstrating actual scope

This prescriptive measure can be used for facilities less than 404858 square feet Larger facilities require the use of custom HVAC measure

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 27

Energy Management System For installing a web-based building automation system in existing buildings that currently have no digital automated HVAC controls or have outdated pneumatic control systems with inoperable time control functions Existing HVAC control systems must not have time-of-day scheduling Upgrading obsolete EMS HVAC system with inoperable time clock functions will be reviewed on a case-by-case basis for incentive eligibility This incentive cannot be combined with incentives for programmable thermostats or setback-setup controls Must include the controls strategy and a scaled floor-plan with controlled areas highlighted HVAC BAS systems must be new and include bull Central time clock control bull Web-based interface with PC-based controls and graphic bull Building performance Tracking bull Open-protocol architecture controls system shall consist of either LonTalk (ANSICEA 7091) or BACNet (ASHRAE ANSI 135) protocol being used between all controlled and controlling devices and every node on the network bull Minimum setback period must exceed 2200 hours per year bull A minimum setback space temperature of at least 10degF when heating and 5degF when cooling bull Ability to adjust schedules and settings remotely over the internet bull Report generation describing energy and operating trends

This prescriptive measure can be used for facilities with maximum cooling demand less than 456 tons Larger systems require the use of custom HVAC measure

Demand Controlled Ventilation New ventilation controls must use carbon dioxide levels to measure occupancy and modify the percentage of outside air based on occupancy levels Only buildings with space heating and cooling requirements are eligible Conditioned spaces must be kept between 65ordmF and 75ordmF during occupied operating hours Carbon dioxide sensors must be installed in conjunction with fully functioning motor operated outside air dampers Dual temperature air-side economizers with zone-level CO2 sensors for rooftop units are eligible

This prescriptive measure can be used for facilities with maximum cooling demand less than 2210 tons Larger systems require the use of custom HVAC measure

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 28

Other HVAC Measures- consult project manual for eligibility specifications HVAC

Measure Incentive Unit Quantity Incentive

Measure Code er Unit

H1 8 Hotel Guest Room Occupancy Sensor Room $20

H1 9 Economizer Integrated Dual Enthalpy Economizer Controls Ton $1 5

H20 Circulation Fan High-Volume Low-Speed Unit $30

H21 ECM Circulation Fan Fan $1 5

H27 ECM Circulation Pump Pump $50

H28 Retrocommissioning Cooling Systems

Ton $750

H29 Retrocommissioning Whole Buidling

Square Foot $010

H29 Energy Management System Ton $2500

H30 Demand Controlled Ventilation Ton $2500

Other HVAC Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 29

Unitary HVAC Chillers

Air-Cooled Chillers Water Cooled Positive Displacement Reciprocating Chillers and Water Cooled Centrifugal Chillers Chiller applications including existing multiple chiller configurations (including redundant or lsquostand-byrsquo chillers) existing chillers serving multiple load groups and chillers in industrial applications are defined as non-standard applications and must follow a site-specific custom protocol $005kWh) rate

Incentives are offered for chillers with an IPLV value (expressed in kW per ton) that is less than or equal to the qualifying efficiency shown in the table below The chiller efficiency rating must be based on ARI Standard 550590-2003 for IPLV conditions The chillers must meet ARI standards 550590-2003 be UL listed and use a minimum ozone-depleting refrigerant (eg HCFC or HFC) The ARI net capacity value should be used to determine the chiller tons A manufacturerrsquos specification sheet with the rated kWton-IPLV or COP-IPLV must accompany the application along with the four point performance data that is the basis for the IPLV The application must include a certification that the chiller is appropriately sized for site design load conditions

Chillers must satisfy efficiency requirements for both full load and IPLV efficiencies for either Path A or Path B The table shows the minimum efficiency ratings to qualify for the prescriptive incentive which must be consistent with the expected operating conditions of the efficient chiller For example if the efficient chiller satisfies Path A and generally performs at part load the appropriate baseline chiller efficiency is the IPLV value under Path A If the efficient chiller satisfies Path B and generally performs at full load the appropriate baseline chiller efficiency is the full load value under Path B Generally chillers operating above 70 percent load for a majority (50 or more) of operating hours should use Path A and chillers below 70 load for the majority of operating hours should use Path B

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 30

C3 lt 75 tons

C4 75 tons and lt 150 tons

cs ~ 150 tons and lt 300 tons C6 ~ 300 tons

Water Cooled Centrifugal Chillers C7 lt 300 tons CB ~ 300 tons and lt 600 tons

C9 ~ 600 tons

Path A

Qualifying Full Load Efficiency

Qualifying IPLV Efficiency

Path B

Qualifying Full Load Efficiency

Qualifying IPLV Efficiency

0780 kWton 0567 kWton 0800 kWton 0540 kWton

0775 kWton 0554 kWton 0790 kWton 0527 kWton

0680 kWton 0522 kWton 0718 kWton 0486 kWton 0620 kWton 0486 kWton 0639 kWton 0441 kWton

0634 kWton 0536 kWton 0639 kWton 0405 kWton 0576 kWton 0494 kWton 0600 kWton 0360 kWton

0570 kWton 0494 kWton 0590 kWton 0360 kWton

I

Incentive ($ton)

$17

$17

Unitary Chiller Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 31

Refrigeration

Anti-Sweat Heater Controls Incentives are offered for devices that sense the relative humidity in the air outside of the display case and cycles or turns off the glass door (if applicable) and frame anti-sweat heaters when the ambient dew point is below a preset set point Technologies that can turn off anti-sweat heaters based on sensing condensation (on the inner glass pane) also qualify Incentive is based on the number of doors

Evaporator Fan Controls This measure is for the installation of controls in medium temperature walk-in coolers The controller reduces airflow of the evaporator fans when there is no refrigerant flow The measure must control a minimum of 120 HP where fans operate continuously at full speed The measure also must reduce fan motor power by at least 75 during the off cycle This measure is not applicable if any of the following conditions apply 1) Compressor runs all the time with high duty cycle 2) Evaporator fan does not run at full speed all the time 3) Evaporator fan motor runs on poly-phase power 4) Evaporator fan motor is not shaded-pole or permanent split capacitor (PSC) 5) Evaporator fan does not use off-cycle or time-off defrost

Floating Head Pressure Controls Controls must vary head pressure to adjust condensing temperatures in relation to outdoor air temperature Must replace existing constant pressure or manually controlled systems to achieve reduced head pressure in order to maintain a minimum saturated condensing temperature of 70 degF or a 20 degF variance below design heat pressure during mild weather conditions Compressor size must be at least 5 HP

Automatic Door Closers for Walk-In Coolers and Freezers The auto-closer should be applied to the main insulated opaque door(s) of a walk-in cooler or freezer The auto-closer must be able to firmly close that door when it is within one inch of full closure This must be a newly installed automatic door closer replacements on previously installed door closers are not eligible for an incentive

EC Motor for Walk-inReach-in Refrigerated cases or Freezer cases Incentives are offered for replacement of an existing standard-efficiency shaded-pole or permanent split capacitor evaporator fan motor in refrigerated display cases or fan coil in walk-ins The replacement unit must be an Electronically Commutated Motor (ECM) This measure cannot be used in conjunction with the Evaporator Fan Controller measure

ENERGY STAR Solid Door Freezer and Glass Door Freezer and Refrigerators Incentives are offered for replacement of existing self-contained refrigerators and freezers with units that are ENERGY STARreg listed Only units with built-in refrigeration systems are qualified Units with remote refrigeration systems or units do not qualify Customers must provide proof that the appliance meets the CEE or ENERGY STAR efficiency specifications using ASHRAE Standard 72-2005 (38degF plusmn 2degF) Incentive is per unit

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 32

Refrigeration Suction Pipe Insulation 1 Must insulate bare refrigeration suction lines of 1 58 inches in diameter or less on existing equipment only 2 Cooler lines require frac34 inch of flexible closed-cell nitrite rubber or an equivalent insulation 3 Freezer lines require 1-inch of flexible closed-cell nitrite rubber or an equivalent insulation 4 Insulation exposed to the outdoors must be protected from the weather (ie jacketed with a medium-gauge aluminum jacket)

Night Cover 1 Must install a cover on an existing open refrigerated display case to decrease its cooling load during off hours 2 The equipment manufacturer must not object to the use of night covers for the existing display case model 3 This rebate is based on the linear footage of the installed 4 The cover must be applied for a period of at least six hours

Strip Curtain on Walk-In CoolerFreezer 1 New strip curtains or plastic swinging doors must be installed on doorways of refrigerated spaces (conditioned to less than 50deg F) 2 Rebate is based on the linear footage of the doorway that the strip curtains are being installed in 3 Opening between the strip curtain and bottom of doorway must be no larger than 1 inch 4 Strips must have an overlay greater than 1 inch

Evaporator Coil Defrost Control 1The current system must include an operating electric defrost system with a functional electroshymechanical time clock 2 Evaporator coil temperature and pressure must be monitored by controller in order to determine optimal defrost cycles 3 New intelligent control systems to control the defrost systems will typically replace timed- defrost controls

Variable Speed Refrigeration Compressor This measure VSD control for refrigeration systems and its eligibility targets applies to retrofit construction in the commercial and industrial building sectors it is most applicable to grocery stores or food processing applications with refrigeration systems This protocol is for a VSD control system replacing a slide valve control system

Add Doors to Open Refrigerated Cases The eligible retrofit equipment is either no sweat doors or doors with anti-sweat heaters If a lighting retrofit is included with the new doors it must consume the same amount of energy or less energy than the old lighting Upgrades to lighting or other system components should be processed separately Horizontal cases are not eligible and should be processed as custom

Door Gaskets PECO Smart Ideas For Your Business CampI Program Application Manual

Q1 2017 pg 33

This measure is applicable to commercial refrigeration and applies to the replacement of worn-out gaskets with new better-fitting gaskets Applicable gaskets include those located on the doors of walk-in andor reach-in coolers and freezers This protocol applies to the main doors of both low temperature (ldquofreezerrdquo ndash below 32 degF) and medium temperature (ldquocoolerrdquo ndash above 32 degF) walk-ins

Zero Energy Doors For this measure a no-heatlow-heat clear glass door must be installed on an upright display case It is limited to door heights of 57 inches or more Doors must have either heat reflective treated glass be gas filled or both This measure applies to low temperature cases onlymdashthose with a case temperature below 0degF Doors must have 3 or more panes Total door rail glass and frame heater amperage ( 120 volt) cannot exceed 039413 amps per door for low temperature display cases Rebate is based on the door width (not including case frame)

Air Cooled Refrigeration Condenser Approach temperature lt8F for low temperature loads lt13F for medium temperature loads

Oversized Condenser with VFD New standalone condenser must no more than 150 larger than load

Case Light Occupancy Controls Acceptable for freezer or refrigerated cases as well as open cases or cases with doors

LED Open Case Lighting For replacing open case T8 or T12 fluorescent fixtures with DLC listed LEDs on refrigerators coolers and freezers

LED Enclosed Case Lighting Refrigerated LED case lighting with or without motion sensors on enclosed refrigerated vertical displays The baseline equipment is assumed to be cases with uncontrolled T8 or T12 linear fluorescent lamps

LED Enclosed Case Lighting Freezer LED case lighting with or without motion sensors on enclosed freezer vertical displays The baseline equipment is assumed to be cases with uncontrolled T8 or T12 linear fluorescent lamps

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 34

Refrigeration Measures Ref Measure

Measure Incentive Unit IncentiveUnit Code R01 Anti-Sweat Heater Controls Door $30

R02 Evaporator Fan Controls Controller $50

R03 Floating-head Pressure Controls HP $20

R04 Automatic Door Closers fo r Walk-in Coolers Door $75

R05 Automatic Door Closers fo r Walk-in Freezers Door $75

R06 Evaporator Fan EC Motor fo r Reach- in Cases Motor $35

RO Evaporator Fan EC Motor fo r Walk-in Cases Motor $50

R08 ENERGY STARreg Glass Door Freezer lt15 Cu Ft Unit $100

R09 ENERGY STARreg Glass Door Freezer 15- 49 Cu Ft Unit $125

R10 ENERGY STARreg Glass Door Freezer ~ 50 Cu Ft Unit $145

R11 ENERGY STARreg Solid Door Freezer Unit $75

R12 ENERGY STARreg Glass Door Refrigerator lt50 Cu Ft Unit $30

R13 ENERGY STARreg Glass Door Refrigerator gt= 50 Cu Ft Unit $50

K14 t NtKGY ~ I AKreg ~Olld Uoor Ketngerator $ OU Cu t-t Unit $~0

R15 Suction Pipe Insulation Walk-in Coolers Linear Foot $050

R16 Suction Pipe Insulation Walk in Freezers Linear Foot $075

R17 Night Cover Linear Foot $800

R18 Strip Curtains on Walk-in Cooler Linear Foot $250

R19 Evaporator Coil Defrost Control Controller $7500

R20 Variable Speed Refrigeration Compressor Compressor $85

R21 Add Doors to Open Refrigerated Cases Door $55

R22 Door Gaskets Door $250

R23 Zero Energy Doors Door $50

R24 A ir Cooled Refrigeration Condenser Ton $10

R25 Oversized Condenser with VFD Ton $10

R26 Case Light Occupancy Controls Door $8

R27 LED Open Cose Lighting Cose $10

R28 LED Enclosed Case Lighting Refrigerated Door $30

R30 LED Enclosed Case Lighting Freezer Door $30

Refrigeration Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 35

Food Service Beverage and Snack Machine Controls Incentives are offered for refrigerated vending machines that contain non-perishable bottled and canned beverages Controller for both types of systems must include a passive infrared occupancy sensor to turn off fluorescent lights and other energized machine systems when the surrounding area is unoccupied for 15 minutes or longer For the refrigerated machines the control logic may include periodic power up at 2-hour intervals or longer to maintain product temperature and provide compressor protection

ENERGY STARreg Refrigerated Beverage Vending Machines Incentives are offered for ENERGY STARreg beverage vending machines Qualifying machines can be found at httpswwwenergystargovproductsothervending_machines

ENERGY STARreg Electric Steam Cooker This measure applies to the installation of electric ENERGY STAR steam cookers as either a new item or replacement for an existing unit Gas steam cookers are not eligible The steam cookers must meet minimum ENERGY STAR efficiency requirements A qualifying steam cooker must meet a minimum cooking efficiency of 50 percent and meet idle energy rates specified by pan capacity

ENERGY STARreg Electric Combination Oven This measure applies to electric ovens capable of handling single 12 x 20 x 25 pan per rack

ENERGY STARreg Commercial Convection Oven The oven must meet or exceed heavy load potato cooking energy efficiency of greater than 70 utilizing ASTM Standard F149 Applies only to electric ovens

ENERGY STARreg Commercial Fryers The commercial fryer must have a tested heavy load (French fry for large vats) cooking energy efficiency of greater than 80 utilizing American Society for Testing and Materials (ASTM) Standard F1361 for commercial fryers and ASTM Standard F2144 for large vat fryers Multiple vat configurations are paid per qualifying vat ENERGY STAR maintains a list of qualifying products and specifications at httpwwwenergystargov

ENERGY STARreg Commercial Hot Holding Cabinet Energy STAR rating electric

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 36

Food Service amp Other Measures FoodOther

Measure Incentive Unit Incentive

Measure Code Unit

F01 Beverage Machine Controls Unit $25

F02 Snack Machine Controls Unit $20

F03 ENERGY STARreg Refrigerated Beverage Vending Machir Unit $125

F04 ENERGY STARreg Commerc ial Steam Cooker Unit $200

F05 ENERGY STARreg Electric Combination Oven Unit $200

F06 ENERGY STARreg Commercial Electric Convection Oven Unit $150

F07 ENERGY STARreg Commerc ial Fryers Unit $100

F08 ENERGY STARregCommerc ial Hot Holding Cabinet Unit $200

Food Service Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 37

Motors and Variable Frequency DrivesEarly Replacement Motors For constant speed and uniformly loaded motors this measure applies to the replacement of old motors with new energy efficient motors of the same rated horsepower Old motors must be less than 15 years Replacements where the old motor and new motor have different horsepower ratings are considered custom measures Motors with variable speeds variable loading or industrial-specific applications are also considered custom measures

Motors Incentive Table Motors

Measure Code

HP Incentive per Motor

M01 15 - 10 $40 M02 11 - 50 $100 M03 51-100 $150 M04 gt100 $300

Only VFDs on unitary systems are eligible Non-unitary systems must be submitted as a custom measure Soft start motors are not eligible

Variable Frequency Drives on HVAC Fan Applications Incentives are offered for installing VFDs on existing HVAC fans that do not have pre-existing VFDs This measure applies to HVAC supply and return fans only All other fans including cooling tower fans must be submitted as custom measures Manually fixed speed settings on HVAC fans must be submitted via custom application The VFD must control motor speed automatically in response to pressure flow temperature or other variable signal The installation of a VSD must accompany the permanent removal or disabling of any throttling devices such as inlet vanes bypass dampers and throttling valves etc The incentive is offered per controlled HP

Variable Frequency Drives on Pump Applications Incentives are offered for installing VFDs on existing chilled water pumps and heating hot water pumps that do not have existing VFDs This measure applies to chilled water pumps and heating hot water pumps only All other pumps must be submitted as custom measures Manually fixed speed settings on pumps must be submitted via custom application The VFD must control motor speed automatically in response to pressure flow temperature or other variable signal The installation of a VSD must accompany the permanent removal or disabling of any throttling devices such as throttling valves The incentive is offered per controlled HP

Variable Speed Control for Kitchen Exhaust Hoods The measure consists of installing a new VSD in conjunction with a sensor control system that varies the exhaust rate of kitchen ventilation (exhaust andor makeup air fans) based on the heat and effluent output from the cooking appliances (ie the more heat and smokevapors generated the more ventilation needed) This involves installing a temperature sensor in the hood exhaust collar andor an optic sensor on the end of the hood that senses cooking conditions and allows the system to automatically vary the rate of exhaust to match requirements by adjusting the fan speed accordingly

Variable Speed Drives for Process or Other Equipment VFD must be used in conjunction with a process (non HVAC) application To qualify for this incentive the driven equipment must operate at least 2000 hours per year Redundant or back- up units do not qualify VFDs replacing existing VFDs do not qualify The VFD must control motor

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 38

speed automatically in response to pressure flow temperature or other variable signal VFDs installed as ldquosoft startrdquo without automatic manual closed loop speed control do not qualify The installation of a VFD must accompany the permanent removal or disabling of any throttling devices such as throttling valves The incentive is per controlled HP and only applies to controlled motors less than 50 HP

VSDVFD Incentives Table VFD

Measure Code

Measure Unit Incentive per Unit

Fan Application

V01 VFD on HVAC Fan HP $25 Pump Application

Variable Speed Control for Kitchen Exhaust Hoods

Variable Speed Drives for Process or Other Equipment

V02 VFD on Chilled Water Pumps HP $25 V03 VFD on Heating Hot Water Pumps HP $25

V04 Kitchen Exhaust Fan Retrofit Hood HP $500

V05 Process Motor lt 50 HP HP $50

Domestic Hot Water Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater This measure documents the energy savings attributed to converting from a standard electric water heater to an ENERGY STAR natural gaspropane-fired water heater or a standard oil-fired water heater with an Energy Factor of 0585

Heat Pump Water Heater This includes heat pump water heaters with energy factors meeting ENERGY STAR criteria The measure described here involves a direct retrofit of a resistive electric water heater with a heat pump water heater It does not cover systems where the heat pump is a pre-heater or is combined with other water heating sources More complicated installations can be treated as custom projects

Low Flow Pre-Rinse Spray Valve This measure applies to efficient low flow pre-rinse sprayers in grocery and food service applications The most likely areas of application are kitchens in restaurants and hotels Only premises with electric water heating may qualify for this incentive In addition the replacement pre-rinse spray nozzle must use less than 16 gallons per minute with a cleanability performance of 26 seconds per plate or less Low flow pre-rinse sprayers reduce hot water usage and save energy associated with water heating

Domestic Hot Water Incentive Table

Measure Code Measure Unit Retrofit Incentive per

Unit

W01 Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater Unit $100

W02 Heat Pump Water Heater Unit $100 W03 Low-Flow Pre-Rinse Spray Valve Valve $17

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 39

Compressed Air SystemsNo-loss Condensate Drain No-loss Condensate Drains are controlled by a sensor that monitors the level of condensate and only open when there is a need to drain condensate They close before compressed air is allowed to escape This measure is targeted to non-residential customers whose equipment is a timed drain that operates on a pre-set schedule Acceptable baseline conditions are compressed air systems with standard condensate drains operated by a solenoid and timer

Air-Entraining air nozzle This measure is targeted to non-residential customers whose compressed air equipment uses stationary air nozzles in a production application with an open copper tube of 18rdquo or 14rdquo orifice diameter Energy efficient conditions require replacement of an inefficient non-air entraining air nozzle with an energy efficient air-entraining air nozzle that use less than 15 CFM at 100 psi for industrial applications

Storage Tanks for LoadNo Load Screw Compressors This measure protocol applies to the installation of air receivers with pressureflow controls to loadno load compressors Loadno load compressors unload when there is low demand The process of unloading is done over a period of time to avoid foaming of the lubrication oil Using a storage tank with pressureflow control will buffer the air demands on the compressor Reducing the number of cycles in turn reduces the number of transition times from load to no load and saves energy The baseline equipment is a loadno load compressor with a 1 galcfm storage ratio or a modulating compressor with blowdown The high efficiency equipment is a loadno load compressor with a minimum storage ratio of 4 gallons of storage per cfm

Cycling Refrigerated Thermal Mass Dryer When air is compressed water vapor in the air condenses and collects in liquid form Some of this condensate collects in the air distribution system and can contaminate downstream components such as air tools with rust oil and pipe debris Refrigerated air dryers remove the water vapor by cooling the air to its dew point and separating the condensate Changes in production and seasonal variations in ambient air temperature lead to partial loading conditions on the dryer Standard air dryers use a hot gas bypass system that is inefficient at partial loads A Cycling Thermal Mass Dryer uses a thermal storage medium to store cooling capacity when the system is operated at partial loads allowing the dryer refrigerant compressor to cycle

This measure is targeted to non-residential customers whose equipment is a non-cycling refrigerated air dryer with a capacity of 600 cfm or below Acceptable baseline conditions are a non-cycling (eg continuous) air dryer with a capacity of 600 cfm or below The replacement of desiccant deliquescent heat-of-compression membrane or other types of dryers does not qualify under this measure

Variable Speed Air Compressor This type of compressor uses a special drive to control the speed (RPM) of the unit which in turn saves energy compared to a fixed speed equivalent

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 40

No-loss Condensate Drain Air-Entraining Air Nozzle Cycling Refrigerated Thermal Mass Dryer

Compressor Incentive per

Equipment Type Units Quantity Daily Operating Unit

Hours

CA04 Storage Tanks for LoadNo Load Screw

Compressor HP $10 Compressors

CA05 Variable Speed Air Compressor

Compressor HP $30

CA06 Compressed Air System Optimization

Compressor HP $50

Compressed Air System Optimization The submitted optimization measures must be identified in an Air System Audit or equivalent study to be eligible The measures must demonstrate energy savings as evaluated by a Program Engineer Additionally measures must also fall under one or more of the category below to be eligible

1) Install storage Receivers (new receivers only replacing existing storage receivers are ineligible)

2) Compressor control (must demonstrate improvement in partial load efficiency of the compress air system including reduceeliminate partially loaded units)

3) Dryer control 4) Source pressure reduction 5) Right-sizing distribution components such as piping filters regulators

connectors and hoses (routine maintenance replacements are ineligible) 6) Leakage detection and repair 7) Eliminate low-efficiency end-usages of compressed air 8) Heat recovery (most reduce electricity consumption of the replaced heat source)

Compressed Air Systems Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 41

lt65000 Btuh

~ 65000 Btuh and lt135000 Btuh

135000 Btuhand lt240000 Btuh

240000 Btuh and lt760000 Btuh

760000 Btuh

154

142

135

125

123

Chiller Capacity Path APath B efficiency (kWton )

lt 150 tons

~150 tons and lt300 tons

300 tons and lt400 tons

400 tons and lt600 tons

600 tons

lt75 tons

~75 tons and lt150 tons

~150 tons and lt300 tons

~300 tons and lt600 tons

600 tons

0610 FU0695 FL and 0550 IPLV0440 IPLV

0610 FU0635 FL and 0550 IPLV0400 IPLV

0560 FU0595 FL and 0520 IPLV0390 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

Path APath B efficiency (kWton )

0750 FU0780 FL and 0600 IPLV0500 IPLV

0720 FU0750 FL and 0560 IPLV0490 IPLV

0660 FU0680 FL and 0540 IPLV0440 IPLV

0610 FU0625 FL and 0520 IPLV0410 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

Data Centers Data Center incentives are available for facilities ranging in size from office server closets to large standalone facilities

Air Cooled Chiller Path APath B EER (BtuWh) lt150 tons 101 FL97 FL and 137 IPLV158 IPLV ge150 tons 101 FL97 FL and 140 IPLV161 IPLV

Air Cooled Chiller without Condenser Air-cooled chillers without condenser must be rated with matching condensers and comply with air-cooled chiller efficiency requirements

Computer Room Air Conditioner

Computer Room Air Handler Variable Speed Replacing constant speed CRAH with VSD CRAH

Water Cooled Centrifugal Chiller

Water Cooled Positive Displacement or Reciprocating Chiller

Uninterruptible Power Supply Must be Energy Star Certified UPS or have full load efficiency rating

ge948 for 20-100 kVA ge978for ge100 kVA

Mainframe Refresh The rated efficiency of the replacement Mainframes power supply must be at least 8 more

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 42

- Equipment Type Units IncentiveUnit

D1 Air Cooled Chiller Ton $4000 D2 Air Cooled Chiller W ithout Condenser Ton $2000 D3 Computer Room Air Conditioner Ton $3000 D4 Computer Room Air Handler Variable Speed Ton $1000 D5 Water Cooled Centrifugal Chiller Ton $3000 D6 Water Cooled Positive Displacement or Reciprocatin $3000 D7 Uninterruptible Power Supply 20-100 kVA $1000 D8 Uninterruptible Power Supply gt 100 kVA $1000 D9 Mainframe Refresh $2000

D10 Server Refresh $2000 D11 PC Power Managment System $600 D12 HVAC System Optimization $005 D1 3 HoUCold Aisle Containment kWh saved $005 D14 Server Virtualization kW reduction $40000 D1 5 Thin Clients Units $500

efficient compared to the existing Mainframes power supply The replacement Mainframe if Inactive must be decommissioned and removed from the Data Center

Server Refresh Replacement servers must be ENERGY STARreg certified Replacement servers power supply must be 5 more efficiency compared to the power supply of the replaced servers The replaced server must be decommissioned and removed from the data center

HVAC System Optimization Final system must have these features

-Implementation of free cooling by the addition of an economizer system -Conversion of constant speed CRACCRAH into variable speed operations using VFDs and additional control functionalities and -Elevation of exhaust air temperature

HotCold Aisle Containment Includes both Hot and Cold Aisles Installing new containment measures not replacing already existed aisle containment Plenum-only installations not eligible Must result in higher difference between the return air (hot aisle) and supply air (cold aisle) temperatures measured at rack intake and exhaust locations

Server Virtualization Minimum of consolidating 5 Servers virtualized into one Server The virtualized servers if inactive are removed from the Data Center

Thin Clients Must be ENERGY STAR certified thin clients Decommissioned clients are removed from the Data Center

Data Center Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 43

Whole Building Systems Whole Building Systems Approach

The Whole Building Systems approach is intended to encourage integrated energy efficient designs by providing enhanced incentives to the customer who addresses overall energy performance Owners of eligible and qualifying new construction and major renovation projects can receive Whole Building Systems incentives when energy modeling indicates the projectrsquos performance is over 10 better than the ASHRAE 901-2007 Savings from eligible electric end-uses in kilowatt hours define the amount of financial incentive Energy savings achieved through renewable energy sources are not counted toward project energy savings and are not included in the savings basis Incentive reservations obtained during the design phase of a project will be honored for up to 24 months

How to Apply for Whole Building Systems Incentives Before construction begins bull A Pre-notification Application must be submitted documenting the Owners intention to

seek Whole Building Systems incentives bull The Owner must confirm the goals and energy efficiency strategies being pursued by the

design team on the completed Pre-notification Worksheet (Checklist tab) and in the project Summary (Whole Building Performance Summary tab)

bull Submit executable building modeling software files bull Submit the Whole Building Performance Summary worksheet energy simulation model

inputs and outputs and supporting documentation bull Receive confirmation and eligibility notification from the PECO Smart Ideas team and

receive an incentive reservation bull The final incentive paid may differ from the reserved incentive amount The final

incentive will be calculated based on site-verified equipment installation and performance The Owners final application and complete documentation must be received within 6 months of equipment installation or certificate of occupancy whichever is later

bull An executable energy model and model output demonstrating compliance with the criteria of ASHRAE 901-2007 Appendix G will be required and the equipment data sheets LED lighting fixtures must be on the DLC or Energy STAR qualified products list (QPL) to be eligible LED fixtures not on the DLC or Energy STAR QPL has the option of submitting LM79 and LM80 test reports for evaluation against DLC and Energy STAR eligibility criteria

During the construction period bull Owner and design team continue to work closely with their chosen contractor to assure

energy efficiency measures are included and installed in the completed building

When the building is constructed and operational bull Complete the Owner final application Request an equipment verification site visit by the

PECO Smart Ideas team Equipment must be installed and fully operational o Program staff will schedule a site visit and utilize submitted documentation and

measurement tools to verify that the installation follows the submitted energy simulation model

bull When PECO confirms that there are no significant changes to the installed equipment payment of the reserved incentive will be made to the Owner within 6 weeks

bull If changes from the proposed design energy simulation are found the Owner and design team will be notified of the reduced incentive amount a period of 20 calendar days will

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 44

Improvement Incentive per Sq Ft

over Code

~11 to lt20 $0155

~20 to lt30 $0233

~30 to lt40 $0350

~40 to lt60 $0525

~60 $0700

be allowed for supplemental information to be provided if no additional information is received by PECO Smart Ideas team the reduced incentive payments will be made and sent to the Owner if additional clarification and information is available program staff will work diligently to resolve the discrepancies and arrive at a reasonable incentive adjustment with the customer

Payments made by PECO Smart Ideas are final

Customer Eligibility The Owner of the proposed new building project must be a customer of PECO and receive delivery of electric service from PECO to receive kilowatt-hour based incentives Please note that electricity supply can be provided by any vendor

Project Eligibility bull The project must be a new construction or major renovation Major renovations involving

the removal and redesign of at least two building systems (such as interior lighting and mechanical systems) may apply for Whole Building Systems incentives

bull To qualify for incentives projects must demonstrate energy efficiency enhancements that achieve at least 11 improvement in the proposed design versus the standard baseline

bull The Owner must submit a Pre-approval Application to the program at the stage where changes for increased energy efficiency are still feasible and construction has not been completed

bull Projects receiving Whole Building Systems incentives are not eligible to receive other incentives such as the prescriptive or custom program incentives for the same scope

bull Project components that are NOT eligible for consideration as a basis for PECO Smart Ideas include the following o Alternative fuel sources (eg use of gas or oil equipment in lieu of electric) Please note

that combined heat and power (CHP) systems will be incentivized for the electricity they produce

o Renewable energy sources (eg solar wind biomass) bull Ineligible savings include exterior lighting process receptacle miscellaneous loads and

other unregulated end-uses Custom incentives are available for new construction exterior lighting

Whole Building Systems Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 45

Custom Project Specifications Instructions for Energy Savings Calculations for Custom Projects Custom projects must involve measures that result in a reduction in electric energy use (kWh) Electricity savings may result from either efficiency improvements or fuel switching Custom Incentives are based on the first year kilowatt-hour savings Custom applications must be accompanied by detailed engineering calculations that document the annual total energy savings

The following serve as guidelines for the minimum required documentation

Equipment Information Submittals bull A list of the present and proposed equipment and components to be installed

including manufacturerrsquos catalogmodel number bull Manufacturerrsquos specification sheets showing capacities and performance for all major

components

Energy Savings Calculations Provide calculations documenting the predicted energy consumption of the existing (or baseline) and proposed system using appropriate analytical tools and clearly stated assumptions Calculations may be performed by ldquohandrdquo but spreadsheet analysis or more rigorous modeling is preferred All analysis should be provided in electronic format All assumptions such as operating hours existing and proposed equipment operational details must be presented Engineering algorithms and procedures from recognized technical organizations such as ASHRAE SMACNA ANSI etc must be used Use rated performance factors tested under accepted procedures specified by recognized rating agencies such as AHRI ANSI ASTM etc Provide an explanation when equipment performance rating conditions vary from standard conditions

In support of the calculations extensive documentation must be provided that provides the basis for the savings estimates The documentation must provide information on the equipment operating schedule daily and seasonal load profile and baseline AND energy efficient equipment performance at the operating loads Typical documentation for custom projects often includes bull Engineering or architectural drawings and ldquoequipment schedulerdquo sheets bull Component specification sheets that include part load efficiency or performance

factors bull Spreadsheet calculations or inputoutput files and results from system modeling or

other engineering analysis using accepted engineering algorithms and practices bull Log sheets trend logs from a building management system or other operating

documentation that are often necessary to document operating hours and equipment loading and used as a basis for the calculations (in some cases short term monitoring may be required to document the load profile)

bull Control sequence of operations that are necessary where controls play a part in the savings equation

Additional documentation other than that described in the application may be required for program participation Larger projects may also require pre- and post-project sub metering or monitoring of loads andor power input as part of another measurement and verification activity to demonstrate the actual energy savings that are realized

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 46

Baseline for Custom Analysis Where equipment is replaced prior to the end of its rated service life in order to achieve energy savings the existing equipment performance may be used as the baseline in the energy savings calculations Where equipment is replaced due to failure or for other reasons (such as obsolescence or a need for more capacity) the baseline performance used in the savings calculation should be either the minimum performance that would be required by code for that equipment type and application (where a code applies) or the performance of the equipment that would have been selected as the customers standard practice when a code does not apply

Baseline or Existing System Summary On custom worksheet on application form include make model number name plate information (such as operating voltage and rated full load amps) rated capacity quantities equipment condition and age facility operating hours equipment operating schedule and load curves If needed attach separate sheets

All decisions regarding incentives for custom projects are in the sole discretion of PECO

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 47

APPENDIX PROGRAM UPDATES SUMMARY (Q1 2017) Multifamily Nursing Home and Assisted Living retrofit customers need to apply for incentives through the PECO Smart Ideas Multi-Family Program administered by Franklin Energy For more information please contact Taylor Adler at tadlerfranklinenergycom or call 1-844-4BIZ-SAVE Multifamily Nursing Home and Assisted Living new construction customers can proceed with applying for incentives here

Revised Incentives

Data Centers

Measure Incentive Effective Immediately Previous Incentive

Air-cooled chiller for data centers $40ton $10ton Air-cooled chiller without condenser for data centers $20ton $10ton

Computer room air conditioner $30ton $7ton Water-cooled centrifugal chiller for data centers $30ton $5ton Water-cooled positive displacement or reciprocating chiller for data centers

$30ton $5ton

Uninterruptible power supply 20-100 kVA $10kVA $6kVA Uninterruptible power supply gt100 kVA $10kVA $1kVA Mainframe refresh $20kW installed $5kW installed Server refresh $20kW installed $4kW installed Server virtualization $400kW reduction $4kW reduction Thin clients $5units $4units

Lighting (Effective Immediately)

Measure Incentive Effective Immediately Specification Previous

Incentive Specification

New construction exterior LED outdoor flood light LED parking garage and canopy lighting LED polearm mounted parking and roadway lighting LED wall mount fixture

$005kWh (custom)

Lighting Power Density (LPD) Requirements Unchanged

$10-54 fixture

Lighting Power Density (LPD) (Wft2) by Space Type or Building Area

LED Replacement Lamps (Tubes) 2

$250lamp 5 Min Watts Reduced

$250lamp 6 Min Watts Reduced

LED Replacement Lamps (Tubes) 4

$400lamp 10 Min Watts Reduced

$400lamp 12 Min Watts Reduced

Permanent Fixture Removal $010Watt removed

Clarification of calculation to represent actual Wattage removed

$010Watt removed

Lighting (Effective 6117)

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 48

Measure Incentive Effective 6117 Specification Previous

Incentive Previous Specification

Interior LED high-bay fixtures andor retrofit kits if lt 20000 LED Lumens

$50fixture 150 Min Watts Reduced

$75fixture 150 Min Watts Reduced

Interior LED high-bay fixtures andor retrofit kits if gt 20000 LED Lumens

$75fixture 225 Min Watts Reduced

$75fixture 150 Min Watts Reduced

New Incentives

Compressed Air

Measure New Incentive Effective Immediately Variable speed air compressor $30compressor HP Compressed air system optimization $50compressor HP

HVAC

Measure New Incentive Effective Immediately ECM circulation pump $50pump Retro-commissioning cooling systems $750ton Retro-commissioning whole building $010square foot Energy management system $25ton Demand controlled ventilation $25ton Water-cooled air conditioner $22ton

Food Service

Measure New Incentive Effective Immediately Combination oven $200unit ENERGY STARreg commercial convection oven $150unit ENERGY STARreg commercial fryers $100unit ENERGY STARreg commercial hot holding cabinet $200unit

Refrigeration

Measure New Incentive Effective Immediately Air-cooled refrigeration condenser $10ton Oversized condenser with VFD $10ton Case light occupancy controls $750door

Lighting

Measure New Incentive Effective Immediately Interior central lighting controls $00175sq foot

Motors and Drives

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 49

-

Measure New Incentive Effective Immediately VFD for dust collection system motor $50HP

Application Clarifications and Revised Requirements

Clarification of LED Eligibility for New Construction or Retrofit Projects

LED Eligibility is determined by whether lighting products are listed in either the DesignLights Consortium (DLC) Qualified Products List of commercial-grade LED luminaires or the US Environmental Protection Agency database of ENERGY STAR certified products For products not yet listed contractors may submit LM79 and LM80 test reports PECO Smart Ideas engineers will review test reports to determine if the product in question meets performance specifications

Revised W 9 Requirement

W-9 forms EIN numbers are no longer required

Deletion of erroneous statement in New Construction Lighting

The following statement from previous Business Manual has been deleted ldquoThe minimum lighting power density used to calculate the incentive shall be no lower than 50 of the ASHRAE 901-2007 valuerdquo

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 50

  • Commercial amp Industrial Program Application Manual
    • Follow This Easy Process
      • Pre-Approval Application Checklist
      • Final Application Checklist
          • Terms and Conditions
            • Program Effective Dates
            • Program and Project Eligibility
            • Incentive Payment Limits
            • Application Review Process
            • Inspections andor PUCrsquos Statewide Program Evaluation
            • Requirements for Custom Project Electricity Savings Calculation
            • Tax Liability
            • No Endorsement
            • Warranties
            • Limitation of Liability
            • Assignment
            • Customerrsquos Certification
            • Termination
            • Acknowledgement
              • Retrofit Lighting Solutions
                • General Linear Fluorescent Lamp and Ballast Specification Requirements
                • LED Lamps and Fixtures
                • Minimum Watts Reduced
                • Linear LED (Tubes)
                • Permanent Fixture Removal
                  • LED Traffic Signals
                    • LED Traffic Signals Incentive Table
                      • New Construction Lighting Specifications
                        • New Construction Lighting Incentives Table
                          • New Construction Lighting Power Density Code
                              • Exterior New Construction Lighting
                              • HVAC Equipment
                                • Air-Source Air Conditioners and Air-Source Heat Pumps
                                • Package Terminal Systems (Replacements)
                                • Ductless Mini-Split Heat Pump lt54 Tons
                                • Geothermal Heat Pump
                                  • Other HVAC Equipment
                                    • Hotel Guest Room Occupancy Sensor
                                    • ECM Circulation Fan
                                    • ECM Circulation Pump
                                    • Retrocomissioning Cooling Systems
                                    • Retrocomissioning Whole Building
                                    • Energy Management System
                                    • Demand Controlled Ventilation
                                    • Other HVAC Incentives Table
                                      • Unitary HVAC Chillers
                                        • Air-Cooled Chillers Water Cooled Positive Displacement Reciprocating Chillers and Water Cooled Centrifugal Chillers
                                          • Refrigeration
                                            • Anti-Sweat Heater Controls
                                            • Evaporator Fan Controls
                                            • Floating Head Pressure Controls
                                            • Automatic Door Closers for Walk-In Coolers and Freezers
                                            • EC Motor for Walk-inReach-in Refrigerated cases or Freezer cases
                                            • ENERGY STAR Solid Door Freezer and Glass Door Freezer and Refrigerators
                                            • Refrigeration Suction Pipe Insulation
                                            • Night Cover
                                            • Strip Curtain on Walk-In CoolerFreezer
                                            • Evaporator Coil Defrost Control
                                            • Variable Speed Refrigeration Compressor
                                            • Add Doors to Open Refrigerated Cases
                                            • Door Gaskets
                                            • Zero Energy Doors
                                            • Air Cooled Refrigeration Condenser
                                            • Oversized Condenser with VFD
                                            • Case Light Occupancy Controls
                                            • LED Open Case Lighting
                                            • LED Enclosed Case Lighting Refrigerated
                                            • LED Enclosed Case Lighting Freezer
                                              • Food Service
                                                • Beverage and Snack Machine Controls
                                                • ENERGY STARreg Refrigerated Beverage Vending Machines
                                                • ENERGY STARreg Electric Steam Cooker
                                                • ENERGY STARreg Electric Combination Oven
                                                • ENERGY STARreg Commercial Convection Oven
                                                • ENERGY STARreg Commercial Fryers
                                                • ENERGY STARreg Commercial Hot Holding Cabinet
                                                  • Motors and Variable Frequency Drives
                                                    • Early Replacement Motors
                                                    • Variable Frequency Drives on HVAC Fan Applications
                                                    • Variable Frequency Drives on Pump Applications
                                                    • Variable Speed Control for Kitchen Exhaust Hoods
                                                    • Variable Speed Drives for Process or Other Equipment
                                                      • Domestic Hot Water
                                                        • Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater
                                                        • Heat Pump Water Heater
                                                        • Low Flow Pre-Rinse Spray Valve
                                                        • Domestic Hot Water Incentive Table
                                                          • Compressed Air Systems
                                                            • No-loss Condensate Drain
                                                            • Air-Entraining air nozzle
                                                            • Storage Tanks for LoadNo Load Screw Compressors
                                                            • Cycling Refrigerated Thermal Mass Dryer
                                                            • Variable Speed Air Compressor
                                                            • Compressed Air System Optimization
                                                            • Compressed Air Systems Incentive Table
                                                              • Data Centers
                                                                • Air Cooled Chiller
                                                                • Air Cooled Chiller without Condenser
                                                                • Computer Room Air Conditioner
                                                                • Computer Room Air Handler Variable Speed
                                                                  • Replacing constant speed CRAH with VSD CRAH
                                                                    • Water Cooled Centrifugal Chiller
                                                                    • Water Cooled Positive Displacement or Reciprocating Chiller
                                                                    • Uninterruptible Power Supply
                                                                    • Mainframe Refresh
                                                                    • Server Refresh
                                                                      • Whole Building Systems
                                                                        • Whole Building Systems Approach
                                                                        • How to Apply for Whole Building Systems Incentives
                                                                        • Customer Eligibility
                                                                        • Project Eligibility
                                                                        • Whole Building Systems Incentives Table
                                                                          • Custom Project Specifications
                                                                            • Instructions for Energy Savings Calculations for Custom Projects
                                                                            • Equipment Information Submittals
                                                                            • Energy Savings Calculations
                                                                            • Baseline for Custom Analysis
                                                                            • Baseline or Existing System Summary

Application Review Process

Pre-approval is required for all projects A pre-approval application must be submitted before you purchase equipment or technology for which the incentive is being requested Pre-approval is not a guarantee of program acceptance Completed applications will be reviewed in the order received The location or business name on the invoice must be the same as the application information The incentive is reserved for the project when PECO receives a complete preshyapproval application and determines that the project meets the program eligibility requirements Applicants who submit incomplete applications will be notified of deficiencies upon review of the application and could lose their place in line in the review process until all requested information is received Applicants are encouraged to call the program hotline if they have any questions about documentation requirements

PECO will review final applications for eligibility and completeness The final application and all required supporting documentation must be received within 90 days of project completion but no later than May 15 2021 to be eligible for incentives Project documentation including original dated invoices for the purchase and installation of the measures andor product specification sheets is required

The project invoice must provide sufficient detail to separate the project cost from the cost of other services such as repairs and building code compliance PECO reserves the right to request additional supporting documentation necessary to ensure measure eligibility and verify that the expected energy savings will occur Requested information may include but is not limited to equipment purchase dates installation dates proof that the equipment is operational manufacturer specifications warranty information and proof of customer co-payment PECO will make every effort to maintain the confidentiality of customer information except that such information must be provided to the PA PUC and its contractor as well as PECOrsquos contractor for measurement and evaluation

The installed measures are not eligible for incentives from other PA Act 129 Phase 3 Energy Efficiency Programs

Inspections andor PUCrsquos Statewide Program Evaluation

PECO its agents measurement and verification contractor andor the PUC statewide program evaluator have the right to audit or inspect all projects to verify compliance with the program rules and verify the accuracy of project documentation This may include pre-installation andor post-installation inspections detailed lighting layout descriptions metering data collection interviews and utility bill data analyses The customer must allow access to project documents and the facility where the measures were installed for a period of five years after receipt of incentive payment by PECO

Requirements for Custom Project Electricity Savings Calculation

The annual electricity savings must be calculated for custom projects using industry accepted engineering algorithms or simulation models The applicant must estimate the annual electricity usage of both the existing and proposed equipment based on the current operation of the facility If the existing equipment is at the end of its rated useful life the applicant must substitute equipment that would meet the applicable federal and local energy codes as the baseline when calculating the annual energy savings The applicant must be able to clearly describe the method used to calculate the savings The applicant must provide all assumptions used in the calculations and document the source for these assumptions Further information on custom measures can be found in the Application Manual which can be downloaded from

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 8

wwwpecocomsmartideasThe method and assumptions used by the applicant to calculate the annual savings will be reviewed by PECO PECO has sole and final determination of the annual energy savings to be used in calculating the incentive amount PECO also reserves the right to require specific measurement and verification activities including monitoring both before and after the retrofit and to base the incentive payment on the results of these activities

PECO may need to conduct inspections both before and after the retrofit projects to verify equipment and operation conditions Pre-approval application must be submitted while the existing equipment is still in operation in order to allow PECO the opportunity to view the existing equipment

Tax Liability

Incentives may be taxable for most taxpayers If the incentive is more than $600 it will be reported to the IRS and the customer will be provided with an IRS form 1099 unless the customer is exempt PECO is not responsible for any tax liability that may be imposed on any customer as a result of the payment of program incentives All customers must supply their Federal Tax Identification number to PECO in order to receive a Program Incentive Please consult with your tax professional for information on the tax treatment of the incentives

No Endorsement

PECO does not endorse support or recommend any particular manufacturer product or system design in promoting this program and PECO does not guarantee any specific level of energy savings with respect to any product system design or energy efficiency measure

Warranties

PECO DOES NOT WARRANT THE PERFORMANCE OF INSTALLED EQUIPMENT ANDOR SERVICES RENDERED AS PART OF THIS PROGRAM EITHER EXPRESSLY OR IMPLICITLY NO WARRANTIES OR REPRESENTATIONS OF ANY KIND WHETHER STATUTORY EXPRESSEDOR IMPLIED INCLUDING WITHOUT LIMITATIONS WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE REGARDING EQUIPMENT OR SERVICES PROVIDED BY A MANUFACTURER OR VENDOR CONTACT YOUR VENDORSERVICES PROVIDER FOR DETAILS REGARDING PERFORMANCE AND WARRANTIES

Limitation of Liability

By virtue of participating in this program customers agree to waive any and all claims or damages against PECO except the receipt of the program incentive if eligible Participating Customers agree that PECOrsquos liability in connection with this program is limited to paying the program incentive specified Under no circumstances shall PECO its representatives agents or subcontractors be liable for any lost profits special punitive consequential or incidental damages or for any other damages or claims connected with or resulting from participation in this program

Assignment

Customers may assign a portion or all of their program incentive payment to a specified vendor

Customerrsquos Certification Customer certifies that heshe purchased and installed the equipment listed in the application Customer agrees that all information is true and that heshe has conformed to all of the program and equipment requirements listed in the application

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 9

Termination

PECO reserves the right to extend modify (this includes modification of program incentive levels) or terminate this program without prior or further notice

Acknowledgement

I have read understood and am in compliance with all rules and regulations concerning this incentive program I certify that all information provided is correct to the best of my knowledge and I give PECO permission to share my records with the Pennsylvania PUC and agents representatives and contractors it selects to manage coordinate or evaluate the program Additionally I hereby authorize PECO to have reasonable access to my property to inspect the installation and performance of the equipment and installations that are eligible for incentives under the guidelines of the program

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 10

Retrofit Lighting Solutions

General Linear Fluorescent Lamp and Ballast Specification Requirements 32w 4ft HPT8 and reduced wattage T8 lamps must be listed on the Consortium of Energy Efficiency (CEE) product list or must meet CEE standards For further information visit wwwcee1org

LED Lamps and Fixtures The integral lamp or fixture must appear on the Energy Star Qualified Products List or the Design Lights Consortium Qualified Products List

bull Energy Star Qualified Fixture Product List httpwwwenergystargov bull Energy Star Qualified Integral LED lamps httpwwwenergystargov bull Design Lights Qualified Product List httpwwwdesignlightsorg

Minimum Watts Reduced Energy efficient fixtureslamps are required to be lower in load than existing fixtureslamps by specified levels the Minimum Watts Reduced Each lighting measure has its own Minimum Watts Reduced that must be met as eligibility requirement These levels are listed in the lighting worksheet ldquoLighting Incentives Tablersquo tab and reproduced below

Linear LED (Tubes) Linear LED lamps must be listed on the Design LightsTM Consortium (DLC) Qualified Products List

Type A LEDs bull Type A LED linear lamps are powered by a fluorescent ballast bull If present existing magnetic ballast must be removed and replaced with a compatible energy- efficient electronic ballast bull DLC Primary Use Requirement ndash DLC-listed equipment must be classified with one of the following Primary Use designations

o Replacement Lamps (Plug and Play) (UL Type A) bull Label must be affixed to the interior of fixture in a prominent location Label should indicate that the fixture has been retrofitted with

TLEDs and that fluorescent lamps should not be installed as replacements

Type B LEDs bull Type B LED tubes are powered by an internal driver bull Existing fluorescent ballast must be removed and fixturersquos incoming power wires are connected directly to the lamp sockets Strict

adherence to installation instructions is critical when rewiring existing fixtures

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 11

bull The LED linear lamps must be delivered as part of a UL 1598C Classified Luminaire Retrofit Kit with instructions explaining the LED linear lamps must be installed on a luminaire that is already UL Listed

bull The retrofitted luminaire must be clearly identified using the label included with the Retrofit Kit indicating that the luminaire has been modified and can no longer operate the originally intended fluorescent lamp(s)

Type C LEDs

bull Type C LED linear lamps are powered by an external driver bull Existing fluorescent ballast must be removed and replaced with a compatible external driver bull DLC Primary Use Requirement ndash DLC-listed equipment must be classified with one of the following Primary Use designations

o 2-lamp External Driver Lamp-Style Retrofit Kits (UL Type C) o 3-lamp External Driver Style Retrofit Kits (UL Type C) o 4-lamp External Driver Lamp-Style Retrofit Kits (UL Type C)

bull Technical specifications (manufacturerrsquos cut sheet) for the driver must be submitted with the application

Permanent Fixture Removal This measure is to be used only in conjunction with lighting retrofits and is intended for spaces that are currently over lit Incentives are paid $010watt reduced only on fixtures removed not on total watts reduced for entire projects Overall net lumen reduction must be achieved in order to qualify for a permanent fixture removal incentive

Example

(20) Existing fixtures at 10000 lumens each = 200000 lumens

(14) Proposed fixtures at 15000 lumens each = 210000 lumens

Since there is not a net reduction in lumens the six fixtures removed would not be eligible for a permanent fixture removal incentive

It is encouraged that spaces meet recommended foot-candle levels as detailed by IESNA Lighting Design Guide A Program Engineer will evaluate lumens reduction based on the type of fixtures removed and the DLC lumens rating of the fixtures installed

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 12

RETROFIT INTERIOR LIGHTING TABLE

Measure Code

Min Measure Name Watts Incentive Unit

Reduced Technical Specifications

CFL Lighting

CFL1A ENERGY STAR Hard-Wired CFL fixture Indoor AccentTrack 20 $250 lamp

Only complete new fixtures or modular hardwired retrofits with hardwired electronic ballasts qualify

CFL ballast must be programmed start or programmed rapid start with a power factor (PF) ge 090 and a total

harmonic distortion (THD) le 20 Screw-in CFLs are not eligible for this incentive

CFL1B ENERGY STAR Hard-Wired CFL fixture Indoor Directional WallCeiling Mount 20 $250 lamp

CFL1C ENERGY STAR Hard-Wired CFL fixture Indoor Omni-Directional WallCeiling Mount 20 $250 lamp

CFL2A ENERGY STAR Hard-Wired CFL fixture Indoor Portable LampTorchiere 20 $1 lamp

CFL2B ENERGY STAR Hard-Wired CFL fixture Indoor Recessed Downlight 20 $1 lamp

CFL2C ENERGY STAR Hard-Wired CFL fixture Indoor Recessed Downlight Retrofit Module 20 $1 lamp

CFL2D ENERGY STAR Hard-Wired CFL fixture Indoor Under CabinetStrip 20 $1 lamp

CFL3A ENERGY STAR Hard-Wired CFL fixture Outdoor Directional WallCeilingGroundPole Mount 30 $3 lamp

CFL3B ENERGY STAR Hard-Wired CFL fixture Outdoor Omni-Directional WallCeilingGroundPole Mount 30 $3 lamp

CFL3C ENERGY STAR Hard-Wired CFL fixture Outdoor Recessed Downlight 30 $3 lamp

CFL3D ENERGY STAR Hard-Wired CFL fixture Outdoor Recessed Downlight Retrofit Module 30 $3 lamp

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 13

Fluorescent Lighting FL1 Interior T5 New Fluorescent Fixture w Electronic Ballast 11 $5 fixture Any T5 is eligible

FL2 T5HO High-Bay Fixture 54 $25 fixture Fixture efficiency must be gt 90

High bay fixtures must be installed at least 15ft above finished floor

FL3 HPT8 High-Bay Fixture 82 $20 fixture Must use High Ballast Factor (gt96) Fixture efficiency must be gt= 85

High bay fixtures must be installed at least 15ft above finished floor

FL4 HPT8 Fixture 20 $5 fixture Must use Low Ballast Factor (lt80)

FL5 RW T8 Lamp - Lamp only 10 $3 lamp Existing T8 fixture re-ballasting to a higher ballast factor are not eligible

HID Measures HID1 Ceramic HID - 25 -39 Watt 95 $13 fixture

Replacing higher wattage HID or High Pressure Sodium or Mercury Vapor

Interior replacements only

HID2 Ceramic HID - 70 Watt 155 $13 fixture HID3 Ceramic HID - 100 Watt 170 $15 fixture HID4 Pulse Start HID - 150 nominal Watts 72 $10 fixture HID5 Pulse Start HID - 350 nominal Watts 100 $13 fixture

HID6 Pulse Start HID - 1000 nominal Watts 400 $15 fixture

Interior LED Fixtures

LED1 ENERGY STAR Integral LED fixture Indoor Recessed Downlight Retrofit Module 38 $7 fixture Retrofit module of existing recessed fixture

LED2 ENERGY STAR Integral LED fixture Indoor Recessed Downlight 38 $7 fixture

New indoor recessed downlight fixture LED3 ENERGY STAR Integral LED fixture Indoor Portable LampTorchiere 30 $7 fixture

LED4 LED AccentTrack Lighting Fixtures 32 $6 head

LED5 LED Low-Bay Fixtures 150 $20 fixture For replacement of HID fixtures mounted le 15 above finished floor

LED6 LED Low-Bay Retrofit Kits 150 $20 fixture

LED8 LED Troffer Fixtures and Retrofit Kits 5 $10 fixture Troffers typically installed in lay-in ceilings 2x2 2x4 configuration

LED9 LED Surface and Suspended Linear Fixtures 25 $10 fixture Examples of LED surface-mounted luminaires include wrap vapor tight and strip fixtures (non-cooler)

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 14

-

Interior LED High Bay Fixtures

LED10A LED High-Bay Fixtures le 20000 LED lumens 150 $50 fixture

High bay fixtures must be installed at least 15ft above finished floor

LED10B LED High-Bay Fixtures gt 20000 LED lumens 225 $75 fixture

LED11A LED High-Bay Retrofit Kits le 20000 LED lumens 150 $50 fixture

LED11B LED High-Bay Retrofit Kits gt20000 LED lumens 225 $75 fixture

LED Parking Garage and Canopy Fixtures

LED12 LED Parking Garage and Canopy Fixtures and Retrofit Kits Outdoor lt= 5000 LED lumens 50 $15 fixture

Fixtures must be physically installed in a parking garage (area where vehicles are physically parked) or

fuel pump canopy Typically represents replacement of le175 W Metal

Halide or equivalent

LED13 LED Parking Garage and Canopy Fixtures and Retrofit Kits Outdoor 5001 - 10000 LED lumens 70 $30 fixture

Typically represents replacement of Metal Halide or equivalent greater than 175W and less than 400W

Product must be installed in a parking garage (area where vehicles are physically parked) or fuel pump

canopy

LED14 LED Parking Garage and Canopy Fixtures and Retrofit Kits Outdoor gt 10000 LED lumens 150 $50 fixture

Typically represents replacement of ge400 W Metal Halide or equivalent

Product must be physically installed in a parking garage (area where vehicles are physically parked) or

fuel pump canopy LED Screw in Lamps

ESLED1 ENERGY STAR Screw-in LED Bulb (Decorative Globe) 14 $5 lamp Lamp with globe shape such as type G

ESLED2 ENERGY STAR Screw-in LED Bulb (Decorative non-globe 14 $5 lamp Lamps with non-globe or candle-like shape such as type B C CA F

ESLED3 ENERGY STAR Screw-in LED Bulb and Low Voltage Mini-Reflector Bulbs (DirectionalReflector) 14 $5 lamp ANSI standard PAR and MR type lamps

ESLED4 ENERGY STAR Screw-in LED Bulb (Standard) 14 $5 lamp Lamp such as A series

ESLED5 ENERGY STAR Screw-in LED Bulb (Standard 3-Way) 14 $5 lamp Lamp such as A series with three light levels

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 15

- -LED Screw in Lamps Smart Bulbs

ESLED6 ENERGY STAR Screw-in LED Bulb (Decorative Globe Smart Bulb) 14 $5 lamp Lamp with globe shape such as type G

ESLED7 ENERGY STAR Screw-in LED Bulb (Decorative non-globe Smart Bulb) 14 $5 lamp Lamps with non-globe or candle-like shape such as

type B C CA F

ESLED8 ENERGY STAR Screw-in LED Bulb (DirectionalReflector Smart Bulb) 14 $5 lamp ANSI standard PAR lamps

ESLED9 ENERGY STAR Screw-in LED Bulb (Standard Smart Bulb) 14 $5 lamp Lamp such as A series

LED Tubes (replacing fluorescent)

TLED1 LED Replacement Lamps (Tubes) 2 5 $250 lamp Refer to Lighting Technical Specifications for requirements DLC Type A B and C are eligible bullType B linear (Interior driver) LEDs have the following installation requirements

bullExisting fluorescent ballast must be removed and fixturersquos incoming power wires are connected directly to the lamp sockets Strict adherence to installation instructions is critical when rewiring existing fixtures bullThe LED linear lamps must be delivered as part of a UL 1598C Classified Luminaire Retrofit Kit with instructions explaining the LED linear lamps must be installed on a luminaire that is already UL Listed bullThe retrofitted luminaire must be clearly identified using the label included with the Retrofit Kit indicating that the luminaire has been modified and can no longer operate the originally intended fluorescent lamp(s)

TLED2 LED Replacement Lamps (Tubes) 4 10 $4 lamp

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 16

LED Exterior Lighting

ELED1 ENERGY STAR Integral LED fixture Outdoor Recessed Downlight Retrofit Module 24 $10 module

ENERGY STAR or DLC Qualified fixtures ELED2 ENERGY STAR Integral LED fixture Outdoor Recessed

Downlight 24 $10 fixture

ELED3 LED Outdoor Flood Light Fixtures lt= 5000 LED lumens 50 $10 fixture Typically represents replacement of le175 W Metal Halide or equivalent Fixtures must be DLC qualified

ELED4 LED Outdoor Flood Light Fixtures gt 5000 LED lumens 70 $15 fixture Typically represents replacement of Metal Halide or equivalent greater than 175W Fixtures must be DLC qualified

ELED5 LED PoleArm Mounted Parking and Roadway Fixtures and Retrofit Kits lt= 5000 LED lumens 50 $25 fixture Typically represents replacement of le175 W Metal

Halide or equivalent Product must be DLC qualified

ELED6 LED PoleArm Mounted Parking and Roadway Fixtures and Retrofit Kits Outdoor gt 10000 LED lumens 150 $75 fixture

Typically represents replacement of Metal Halide or equivalent greater than 400W Product must be DLC

listed

ELED7 LED PoleArm Mounted Parking and Roadway Fixtures and Retrofit Kits Outdoor 5001 - 10000 LED lumens 70 $50 fixture

Typically represents replacement of Metal Halide or equivalent greater than 175W and less than 400W

Product must be DLC listed

ELED8 LED Wall Mount Fixtures and Retrofit Kits Outdoor lt= 5000 LED lumens 50 $25 fixture Typically represents replacement of le175 W Metal

Halide or equivalent Product must be DLC qualified

ELED9 LED Wall Mount Fixtures and Retrofit Kits Outdoor gt 5000 LED lumens 70 $50 fixture

Typically represents replacement of Metal Halide or equivalent greater than 175W Product must be DLC

qualified Permanent Fixture Removal

PFRA Indoor Permanent Fixture Removal combined with lighting retrofit na $010 watt removed Incentive only valid when units = ldquofixturerdquo in this table

Incentive is only offered when net lumens are reduced PFRB Outdoor Permanent Fixture Removal combined with lighting retrofit na $010 watt removed

Other LED Lighting LEDEXIT LED Exit Sign

na

$2 sign Replacing Incandescent or Fluorescent

SIGN1A Indoor LED Channel Signage $8 letter

Replacing Neon SIGN1B Outdoor LED Channel Signage $8 letter

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 17

Lighting Controls

CTL Unitary Sensor Controls

na

$1500 sensor

Passive infrared ultrasonic detectors are eligible Includes daylighting controls and all occupancy controls

Controls can be onoff stepped or continuous (dimming) Daylight sensor controls are required to be commissioned in order to ensure proper sensor calibration and energy savings

Minimum of 30 watts controlled per control

CLC Interior Central Lighting Controls $00175

square foot of area

under control

Automated central lighting control systems with override capabilities

This measure includes centrally-controlled time clocks wireless on off switches bi level switches computer based

controls pre-set scene selection dimmable ballasts and on-off dimmer switches for non-personal tuning

Floor plan must be submitted verifying square footage

DAYOCC Controls Combination - Daylighting and Occupancy Fixture Mounted $1500 sensor Minimum of 30 watts controlled per control

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 18

LED Traffic SignalsThis measure applies to the early replacement of existing incandescent traffic lights and pedestrian signals with LEDs New LED traffic signals must comply with ENERGY STAR requirements which can be found at httpswwwenergystargoviapartnersproduct_specseligibilitytraffic_eligpdf98bfshy1786

LED Traffic Signals Incentive Table

Round Traffic Signals 8 Red

Incentive per Signal

$15

8 Yellow 8 Green 12 Red

12 Yellow 12 Green

Turn Arrow Signals

8 Red

$13

8 Yellow 8 Green 12 Red

12 Yellow 12 Green

Pedestrian Signals

9 Pedestrian Only

$13

12 Hand Only 12 Pedestrian Only 12 Countdown Only

12 Pedestrian and Hand Overlay 16 Pedestrian and Hand Side by

Side 16 Pedestrian and Hand Overlay

16 Hand and Countdown Side-by-Side

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 19

Lighting Controls that Exceed Code Requirements

New Construction Lighting SpecificationsUnder the Lighting Power Density Approach the lighting power installed is compared with the lighting power allowed by code Incentives are available for systems where the installed lighting power is lower than the code-allowed power by at least 10 Savings are based on the Lighting Power Density (LPD) calculated on a watts per square foot basis Incentives will be paid only on the area of the building where the lighting installation is complete and is ready for occupancy If a portion of a building is not built-out such that the lighting in an area is not complete and ready for occupancy then that portion is not eligible for an incentive Baseline lighting power density is based on ASHRAE 901- 2007 Either the Space-by-Space or Building Area method may be used to calculate the LPD for the purposes of the incentive

Required Documentation bull Lighting Worksheet bull COMcheck Interior Lighting Report or equivalent analysis demonstrating space-byshy

space or building area calculations bull Reflected ceiling plans and electrical plan sheets showing lighting fixture layout bull Lighting fixture schedule sheet including fixture counts bull Fixture submittal or specification sheets showing model number and rated fixture wattage bull Architectural floor plans displaying floor area affected by proposed lighting installation

New Construction Lighting Incentives Table Lighting Wattssq ft

Improvement over of Code Incentive

gt= 10 and lt 20 $0035sq gt= 20 and lt 30 $007sq ft gt= 30 and lt 40 $0105sq

gt= 40 $021 sq ft

Incentives will be paid on a ($005kWh) custom basis Please contact Program Staff for eligibility of lighting controls for New Construction projects

Interior Occupancy Sensors Incentives are offered for occupancy-based controls in areas where they are not required by code Passive infrared ultrasonic detectors and fixture-integrated sensors or sensors with a combination sensor are eligible All sensors must be hard-wired and control interior lighting fixtures The incentive is per Watt controlled An inventory of the controlled fixtures and their wattage must be provided for each sensor with the Final Application

Daylight Dimming System Incentives are offered for daylight sensor controls in spaces with suitable available ambient light for at least part of the day Light may be through skylights clerestories windows or ldquolight tubesrdquo The controls can be onoff stepped or continuous dimming The onoff controller should turn off artificial lighting when the interior illuminance meets the desired indoor lighting level The stepped controller generally dims the artificial lighting 50 when the interior illuminance levels reach 50 of the desired lighting levels Continuous or dimming controllers dim artificial lighting proportionally to the available ambient light All types of daylight sensor controls are required to be commissioned in order to ensure proper sensor calibration and energy savings

Required Documentation bull Cut sheets or submittals of lighting control systems Reflected ceiling plans or schedule

showing which fixtures are controlled by lighting controls

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 20

New Construction Lighting Power Density CodeRequirements ndash Space by Space Method

Building Specific Space Types LPD (Wft2) Building Specific Space Types LPD (Wft2)

GymnasiumExercise Center AutomotivemdashServiceRepair 07

Playing Area 14 Manufacturing

Exercise Area 09 Low (lt25 ft Floor to Ceiling Height) 12

CourthousePolice StationPenitentiary High (gt25 ft Floor to Ceiling Height) 17

Courtroom 19 Detailed Manufacturing 21

Confinement Cells 09 Equipment Room 12

Judges Chambers 13 Control Room 05

Fire Stations HotelMotel Guest Rooms 11 Fire Station Engine Room 08 DormitorymdashLiving Quarters 11

Sleeping Quarters 03 Museum

Post Office-Sorting Area 12 General Exhibition 10 Convention Center-Exhibit Space 13 Restoration 17

Library BankOfficemdashBanking Activity Area 15 Card File and Cataloging 11 Religious Buildings

Stacks 17 Worship Pulpit Choir 24

Reading Area 12 Fellowship Hall 09

Hospital Retail

Emergency 27 Sales Area [For accent lighting see 93121(c)] 17

Recovery 08 Mall Concourse 17

Nurse Station 10 Sports Arena

ExamTreatment 15 Ring Sports Area 27

Pharmacy 12 Court Sports Area 23

Patient Room 07 Indoor Playing Field Area 14

Operating Room 22 Warehouse

Nursery 06 Fine Material Storage 14

Medical Supply 14 MediumBulky Material Storage 09

Physical Therapy 09 Parking GaragemdashGarage Area 02

Radiology 04 Transportation

LaundrymdashWashing 06 AirportmdashConcourse 06

AirTrainBusmdashBaggage Area 10

TerminalmdashTicket Counter 15

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 21

New Construction Lighting Power Density CodeRequirements ndash Building Area Method

Building Area Type 221 LPD (Wft2)

Automotive facility 09

Convention center 12

Courthouse 12

Dining bar loungeleisure 13

Dining cafeteriafast food 14

Dining family 16

Dormitory 1

Exercise center 1

Gymnasium 11

Health-care clinic 1

Hospital 12

Hotel 1

Library 13

Manufacturing facility 13

Motel 1

Motion picture theater 12

Building Area Type LPD (Wft2)

Multifamily 07

Museum 11

Office 1

Parking garage 03

Penitentiary 1

Performing arts theater 16

Policefire station 1

Post office 11

Religious building 13

Retail 15

Schooluniversity 12

Sports arena 11

Town hall 11

Transportation 1

Warehouse 08

Workshop 14

221 In cases where both a common space type and a building specific type are listed the building specific space type shall apply

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 22

Exterior New Construction LightingExterior New Construction savings over code lighting power density will be incentivized using custom lighting measure at $005kWh rate Participants must submit exterior lighting plans Submittals COMCHECK REPORT and lighting schedule for exterior lighting Savings are calculated from the LPD (Wsq ft) indicated below Additional information may be required based on the building exterior type and space description indicated below To contribute to incentive LEDs must satisfy program requirements for DLC Energy Star or equivalent listing

Required Documentation bull COMcheck Interior Lighting Report or equivalent analysis demonstrating space-by-space or

building area calculations bull Drawings showing lighting fixture layout bull Lighting fixture schedule sheet including fixture counts bull Fixture submittal or specification sheets showing model number and rated fixture wattage

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 23

Building Exterior Space Description LPD

Unco erect Pariki Ilg Area Parlurng ots arnd Drives 0 15 WfW

B i ing Grournds W al 1Yays lless Hlan 11] e 10 Wltirneru- 00

W a Nays 10 middot de or greater 112 W

Plaza a reas

Spec rest re areas

Stainh1ays 1ow 2

B i ing 8ntrames and Exits Ma efilbies m wr near foot of door width

Other doors 2o w 1r ear foot of door width

Ctmqpies and Overhimgs Free starndillg and a ched tmd 12s w m2 m bullerhangs

0 door sales Op en areas (ind udi Ilg ve id e sales 05 W lo )

street frontage far vehicle sales lots 21] W linear toot in addi middot on to open are-0bullmiddot lo~nce

B i ing facades 0 2 W tfl2 middot or eacil illumirnated N311 or surface

o r 5 0 Wllinear root fo r eac h m n inated N3l1 o r

surface length

Automated te lle r rnachmiddot es a lld 210 W per loca tion plus 91] night deposito liies W 1pernddiliorml A I middot per

1oca middot om

Eirltrances and gatehouse inspecliion 125 W ffl2 o middot uncovered slatiaBS a goo~ ed acir ies area

Load ing are-0s or law enforcement 0 5 W 2 of u rnco1bullered area fire ambu rnce and otiher emergency service ibullehmiddotctes

Drive-through w indOWs a taslrood 400 W per drive-Hlrough restaurants

Parking near 24 -h our retail 80111 W per main entry entmn ces

HVAC Equipment Air-Source Air Conditioners and Air-Source Heat Pumps New unitary air conditioning units or air source heat pumps that meet or exceed the qualifying cooling efficiency shown in the HVAC Incentives Worksheet are eligible for an incentive They can be either split systems or single package units The efficiency of split systems is based on an ARI reference number All packaged and split system cooling equipment must meet Air Conditioning and Refrigeration Institute (ARI) standards (210240 320 or 340360) be UL listed use a minimum ozone-depleting refrigerant (eg HCFC or HFC) All required efficiencies are based on the Consortium for Energy Efficiency (CEE) high-efficiency commercial air conditioning and heat pump specifications (wwwcee1org) A manufacturerrsquos specification sheet indicating the system efficiency must accompany the application Disposal of the existing unit

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 24

must comply with local codes and ordinances

Package Terminal Systems (Replacements) Package terminal air conditioners and packaged terminal heat pumps are through-the-wall self-contained units that are 2 tons (24000 Btuh) or less All EER values must be rated at 95degF outdoor dry-bulb temperature

Ductless Mini-Split Heat Pump lt54 Tons Incentives are offered for Ductless Mini-Split Heat Pump lt54 Tons with SEER rating greater than or equal to 120 and EER greater than or equal to 145 and HSPF greater than or equal to 90

Geothermal Heat Pump Geothermal equipment is a high-efficiency groundwater source water source or ground source heat pump system that meets or exceeds the energy efficiency requirements shown in the tables below These measures do not apply to heat pump systems coupled with non-heat pump systems such as chillers rooftop AC units boilers or cooling towers which must be filed as custom measures All HVAC applications other than comfort cooling and heating such as process cooling must also be applied for as custom measures

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 25

HVAC Heating Qualifying Incentive

Equipment Type and Cooling Capacity Cooling Qualifying Efficiency ($ per cooling Measure Code Efficiency

ton)

Air Cooled Air Conditioner

H01 lt 54 tons (lt 65000 Btuhr) 15 SEER NA $22

H02 lt 54 and lt 11 25 tons

125 IEER $22 (lt 65 000 Btuh and lt 135 000 Btuhr) NA

H03 lt11 25 and lt 20 tons

123 IEER NA $22 (lt 135000 Btuh and lt 240000 Btuhr)

H04 lt 20 and lt 6333 tons (~

11 1 IEER NA $22 240000 Btuh and lt 760000 Btuhr)

HOS ~ 6333 Ions (~ 760000 Btuhr) 103 IEER NA $22

Air Cooled Heat Pumps

H06 lt 54 tons (lt 65000 Btuhr) 143 SEER 87 HSPF $30

H07 lt 54 and lt 11 25 tons

123 IEER 3 3 COP $30 (lt 65000 Btuh and lt 135000 Btuhr)

HOS lt11 25 and lt 20 tons

1U IEER 3 2 COP $30 (lt 135000 Btuh and lt 240000 Btuhr)

H09 lt 2000 tons (240000 Btuhr) 105 IEER 3 2 COP $30

Packaged Terminal Systems (PTAC and PTHP) (PTHP only)

H10 lt 8000 Btuhr (lt066 tons) 11 8 EER 33 $17

H11 ~8000 and lt10500 Btuhr (~066 and lt 0875 tons) 11 4 EER 32 $17

H12 gt10500 Btuhr ( 875 tons) 107 EER 31 $17

H22 lt 54 tons (lt 65000 Btuhr) 121 EER 12 3 IEER NA $22

lt 54 and lt 11 25 tons 121 EER 12 3 IEER $22 H23

(lt 65000 Btuh and lt 135000 Btuhr) NA

H24 lt11 25 and lt 20 tons

120 EER 12 2 IEER $22 (lt 135000 Btuh and lt 240000 Btuhr) NA

H25 lt20 and lt 633 tons

119 EER 12 2 IEER $22 (lt 240000 Btuh and lt 760000 Btuhr) NA

H26 ~ 633 tons( lt760000 Btuhr) 110 EER 11 1 IEER NA

$22

HVAC Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 26

Other HVAC EquipmentHotel Guest Room Occupancy Sensor Incentives are offered for occupancy-based controls that control electric air conditioning air source heat pumps and or electric heating units for individual hotel rooms Systems with nonshyelectric heat are not eligible Sensors must be controlled by automatic occupancy detectors or a key-card system and the default setting for controlled units differ by at least 5 degrees (or shut the unit fan and heating or cooling off completely) from the operating set point during unshyoccupied periods The control system may also be tied into other electric loads such as lighting and plug loads to shut them off when occupancy is not sensed The incentive is per room Replacement or upgrades of existing occupancy-based controls are not eligible as a prescriptive incentive

Economizer Integrated Dual Enthalpy Economizer ControlsThis measure is targeted to non-residential establishments whose HVAC equipment is not equipped with a functional economizer

Circulation Fan High-Volume Low-SpeedFans must be greater than 16 feet in diameter and have variable speed control

ECM Circulation Fan This measure is targeted to non-residential customers whose air handling equipment currently uses a SP or PSC fan motor rather than an ECM This measure applies only to circulating fan motors of 1 HP or less Above 1 HP motors are governed by NEMA standards and would see little to no efficiency benefit by adding an ECM The targeted fan can supply heating or cooling only or both heating and cooling

ECM Circulation Pump This measure is targeted for replacement of a shaded pole or permanent split capacitor pump or motor with an electronically commutated pump or motor le75 HP

Retrocomissioning Cooling Systems Confined to chiller plant andor isolated packaged units For reservation must contain proposal with defined scope at equipment level that demonstrates energy savings For final approval required final commissioning report including raw data (TAB reports) demonstrating actual scope

This prescriptive measure can be used for facilities with maximum cooling demand less than 1687 tons Larger systems require the use of custom HVAC measure

Retrocomissioning Whole Building Covers all relevant major mechanical systems such as chiller plant air side systems compressed air andor process systems For reservation must contain proposal with defined scope at equipment level that demonstrates energy savings For final approval required final commissioning report including raw data (TAB reports) demonstrating actual scope

This prescriptive measure can be used for facilities less than 404858 square feet Larger facilities require the use of custom HVAC measure

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 27

Energy Management System For installing a web-based building automation system in existing buildings that currently have no digital automated HVAC controls or have outdated pneumatic control systems with inoperable time control functions Existing HVAC control systems must not have time-of-day scheduling Upgrading obsolete EMS HVAC system with inoperable time clock functions will be reviewed on a case-by-case basis for incentive eligibility This incentive cannot be combined with incentives for programmable thermostats or setback-setup controls Must include the controls strategy and a scaled floor-plan with controlled areas highlighted HVAC BAS systems must be new and include bull Central time clock control bull Web-based interface with PC-based controls and graphic bull Building performance Tracking bull Open-protocol architecture controls system shall consist of either LonTalk (ANSICEA 7091) or BACNet (ASHRAE ANSI 135) protocol being used between all controlled and controlling devices and every node on the network bull Minimum setback period must exceed 2200 hours per year bull A minimum setback space temperature of at least 10degF when heating and 5degF when cooling bull Ability to adjust schedules and settings remotely over the internet bull Report generation describing energy and operating trends

This prescriptive measure can be used for facilities with maximum cooling demand less than 456 tons Larger systems require the use of custom HVAC measure

Demand Controlled Ventilation New ventilation controls must use carbon dioxide levels to measure occupancy and modify the percentage of outside air based on occupancy levels Only buildings with space heating and cooling requirements are eligible Conditioned spaces must be kept between 65ordmF and 75ordmF during occupied operating hours Carbon dioxide sensors must be installed in conjunction with fully functioning motor operated outside air dampers Dual temperature air-side economizers with zone-level CO2 sensors for rooftop units are eligible

This prescriptive measure can be used for facilities with maximum cooling demand less than 2210 tons Larger systems require the use of custom HVAC measure

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 28

Other HVAC Measures- consult project manual for eligibility specifications HVAC

Measure Incentive Unit Quantity Incentive

Measure Code er Unit

H1 8 Hotel Guest Room Occupancy Sensor Room $20

H1 9 Economizer Integrated Dual Enthalpy Economizer Controls Ton $1 5

H20 Circulation Fan High-Volume Low-Speed Unit $30

H21 ECM Circulation Fan Fan $1 5

H27 ECM Circulation Pump Pump $50

H28 Retrocommissioning Cooling Systems

Ton $750

H29 Retrocommissioning Whole Buidling

Square Foot $010

H29 Energy Management System Ton $2500

H30 Demand Controlled Ventilation Ton $2500

Other HVAC Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 29

Unitary HVAC Chillers

Air-Cooled Chillers Water Cooled Positive Displacement Reciprocating Chillers and Water Cooled Centrifugal Chillers Chiller applications including existing multiple chiller configurations (including redundant or lsquostand-byrsquo chillers) existing chillers serving multiple load groups and chillers in industrial applications are defined as non-standard applications and must follow a site-specific custom protocol $005kWh) rate

Incentives are offered for chillers with an IPLV value (expressed in kW per ton) that is less than or equal to the qualifying efficiency shown in the table below The chiller efficiency rating must be based on ARI Standard 550590-2003 for IPLV conditions The chillers must meet ARI standards 550590-2003 be UL listed and use a minimum ozone-depleting refrigerant (eg HCFC or HFC) The ARI net capacity value should be used to determine the chiller tons A manufacturerrsquos specification sheet with the rated kWton-IPLV or COP-IPLV must accompany the application along with the four point performance data that is the basis for the IPLV The application must include a certification that the chiller is appropriately sized for site design load conditions

Chillers must satisfy efficiency requirements for both full load and IPLV efficiencies for either Path A or Path B The table shows the minimum efficiency ratings to qualify for the prescriptive incentive which must be consistent with the expected operating conditions of the efficient chiller For example if the efficient chiller satisfies Path A and generally performs at part load the appropriate baseline chiller efficiency is the IPLV value under Path A If the efficient chiller satisfies Path B and generally performs at full load the appropriate baseline chiller efficiency is the full load value under Path B Generally chillers operating above 70 percent load for a majority (50 or more) of operating hours should use Path A and chillers below 70 load for the majority of operating hours should use Path B

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 30

C3 lt 75 tons

C4 75 tons and lt 150 tons

cs ~ 150 tons and lt 300 tons C6 ~ 300 tons

Water Cooled Centrifugal Chillers C7 lt 300 tons CB ~ 300 tons and lt 600 tons

C9 ~ 600 tons

Path A

Qualifying Full Load Efficiency

Qualifying IPLV Efficiency

Path B

Qualifying Full Load Efficiency

Qualifying IPLV Efficiency

0780 kWton 0567 kWton 0800 kWton 0540 kWton

0775 kWton 0554 kWton 0790 kWton 0527 kWton

0680 kWton 0522 kWton 0718 kWton 0486 kWton 0620 kWton 0486 kWton 0639 kWton 0441 kWton

0634 kWton 0536 kWton 0639 kWton 0405 kWton 0576 kWton 0494 kWton 0600 kWton 0360 kWton

0570 kWton 0494 kWton 0590 kWton 0360 kWton

I

Incentive ($ton)

$17

$17

Unitary Chiller Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 31

Refrigeration

Anti-Sweat Heater Controls Incentives are offered for devices that sense the relative humidity in the air outside of the display case and cycles or turns off the glass door (if applicable) and frame anti-sweat heaters when the ambient dew point is below a preset set point Technologies that can turn off anti-sweat heaters based on sensing condensation (on the inner glass pane) also qualify Incentive is based on the number of doors

Evaporator Fan Controls This measure is for the installation of controls in medium temperature walk-in coolers The controller reduces airflow of the evaporator fans when there is no refrigerant flow The measure must control a minimum of 120 HP where fans operate continuously at full speed The measure also must reduce fan motor power by at least 75 during the off cycle This measure is not applicable if any of the following conditions apply 1) Compressor runs all the time with high duty cycle 2) Evaporator fan does not run at full speed all the time 3) Evaporator fan motor runs on poly-phase power 4) Evaporator fan motor is not shaded-pole or permanent split capacitor (PSC) 5) Evaporator fan does not use off-cycle or time-off defrost

Floating Head Pressure Controls Controls must vary head pressure to adjust condensing temperatures in relation to outdoor air temperature Must replace existing constant pressure or manually controlled systems to achieve reduced head pressure in order to maintain a minimum saturated condensing temperature of 70 degF or a 20 degF variance below design heat pressure during mild weather conditions Compressor size must be at least 5 HP

Automatic Door Closers for Walk-In Coolers and Freezers The auto-closer should be applied to the main insulated opaque door(s) of a walk-in cooler or freezer The auto-closer must be able to firmly close that door when it is within one inch of full closure This must be a newly installed automatic door closer replacements on previously installed door closers are not eligible for an incentive

EC Motor for Walk-inReach-in Refrigerated cases or Freezer cases Incentives are offered for replacement of an existing standard-efficiency shaded-pole or permanent split capacitor evaporator fan motor in refrigerated display cases or fan coil in walk-ins The replacement unit must be an Electronically Commutated Motor (ECM) This measure cannot be used in conjunction with the Evaporator Fan Controller measure

ENERGY STAR Solid Door Freezer and Glass Door Freezer and Refrigerators Incentives are offered for replacement of existing self-contained refrigerators and freezers with units that are ENERGY STARreg listed Only units with built-in refrigeration systems are qualified Units with remote refrigeration systems or units do not qualify Customers must provide proof that the appliance meets the CEE or ENERGY STAR efficiency specifications using ASHRAE Standard 72-2005 (38degF plusmn 2degF) Incentive is per unit

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 32

Refrigeration Suction Pipe Insulation 1 Must insulate bare refrigeration suction lines of 1 58 inches in diameter or less on existing equipment only 2 Cooler lines require frac34 inch of flexible closed-cell nitrite rubber or an equivalent insulation 3 Freezer lines require 1-inch of flexible closed-cell nitrite rubber or an equivalent insulation 4 Insulation exposed to the outdoors must be protected from the weather (ie jacketed with a medium-gauge aluminum jacket)

Night Cover 1 Must install a cover on an existing open refrigerated display case to decrease its cooling load during off hours 2 The equipment manufacturer must not object to the use of night covers for the existing display case model 3 This rebate is based on the linear footage of the installed 4 The cover must be applied for a period of at least six hours

Strip Curtain on Walk-In CoolerFreezer 1 New strip curtains or plastic swinging doors must be installed on doorways of refrigerated spaces (conditioned to less than 50deg F) 2 Rebate is based on the linear footage of the doorway that the strip curtains are being installed in 3 Opening between the strip curtain and bottom of doorway must be no larger than 1 inch 4 Strips must have an overlay greater than 1 inch

Evaporator Coil Defrost Control 1The current system must include an operating electric defrost system with a functional electroshymechanical time clock 2 Evaporator coil temperature and pressure must be monitored by controller in order to determine optimal defrost cycles 3 New intelligent control systems to control the defrost systems will typically replace timed- defrost controls

Variable Speed Refrigeration Compressor This measure VSD control for refrigeration systems and its eligibility targets applies to retrofit construction in the commercial and industrial building sectors it is most applicable to grocery stores or food processing applications with refrigeration systems This protocol is for a VSD control system replacing a slide valve control system

Add Doors to Open Refrigerated Cases The eligible retrofit equipment is either no sweat doors or doors with anti-sweat heaters If a lighting retrofit is included with the new doors it must consume the same amount of energy or less energy than the old lighting Upgrades to lighting or other system components should be processed separately Horizontal cases are not eligible and should be processed as custom

Door Gaskets PECO Smart Ideas For Your Business CampI Program Application Manual

Q1 2017 pg 33

This measure is applicable to commercial refrigeration and applies to the replacement of worn-out gaskets with new better-fitting gaskets Applicable gaskets include those located on the doors of walk-in andor reach-in coolers and freezers This protocol applies to the main doors of both low temperature (ldquofreezerrdquo ndash below 32 degF) and medium temperature (ldquocoolerrdquo ndash above 32 degF) walk-ins

Zero Energy Doors For this measure a no-heatlow-heat clear glass door must be installed on an upright display case It is limited to door heights of 57 inches or more Doors must have either heat reflective treated glass be gas filled or both This measure applies to low temperature cases onlymdashthose with a case temperature below 0degF Doors must have 3 or more panes Total door rail glass and frame heater amperage ( 120 volt) cannot exceed 039413 amps per door for low temperature display cases Rebate is based on the door width (not including case frame)

Air Cooled Refrigeration Condenser Approach temperature lt8F for low temperature loads lt13F for medium temperature loads

Oversized Condenser with VFD New standalone condenser must no more than 150 larger than load

Case Light Occupancy Controls Acceptable for freezer or refrigerated cases as well as open cases or cases with doors

LED Open Case Lighting For replacing open case T8 or T12 fluorescent fixtures with DLC listed LEDs on refrigerators coolers and freezers

LED Enclosed Case Lighting Refrigerated LED case lighting with or without motion sensors on enclosed refrigerated vertical displays The baseline equipment is assumed to be cases with uncontrolled T8 or T12 linear fluorescent lamps

LED Enclosed Case Lighting Freezer LED case lighting with or without motion sensors on enclosed freezer vertical displays The baseline equipment is assumed to be cases with uncontrolled T8 or T12 linear fluorescent lamps

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 34

Refrigeration Measures Ref Measure

Measure Incentive Unit IncentiveUnit Code R01 Anti-Sweat Heater Controls Door $30

R02 Evaporator Fan Controls Controller $50

R03 Floating-head Pressure Controls HP $20

R04 Automatic Door Closers fo r Walk-in Coolers Door $75

R05 Automatic Door Closers fo r Walk-in Freezers Door $75

R06 Evaporator Fan EC Motor fo r Reach- in Cases Motor $35

RO Evaporator Fan EC Motor fo r Walk-in Cases Motor $50

R08 ENERGY STARreg Glass Door Freezer lt15 Cu Ft Unit $100

R09 ENERGY STARreg Glass Door Freezer 15- 49 Cu Ft Unit $125

R10 ENERGY STARreg Glass Door Freezer ~ 50 Cu Ft Unit $145

R11 ENERGY STARreg Solid Door Freezer Unit $75

R12 ENERGY STARreg Glass Door Refrigerator lt50 Cu Ft Unit $30

R13 ENERGY STARreg Glass Door Refrigerator gt= 50 Cu Ft Unit $50

K14 t NtKGY ~ I AKreg ~Olld Uoor Ketngerator $ OU Cu t-t Unit $~0

R15 Suction Pipe Insulation Walk-in Coolers Linear Foot $050

R16 Suction Pipe Insulation Walk in Freezers Linear Foot $075

R17 Night Cover Linear Foot $800

R18 Strip Curtains on Walk-in Cooler Linear Foot $250

R19 Evaporator Coil Defrost Control Controller $7500

R20 Variable Speed Refrigeration Compressor Compressor $85

R21 Add Doors to Open Refrigerated Cases Door $55

R22 Door Gaskets Door $250

R23 Zero Energy Doors Door $50

R24 A ir Cooled Refrigeration Condenser Ton $10

R25 Oversized Condenser with VFD Ton $10

R26 Case Light Occupancy Controls Door $8

R27 LED Open Cose Lighting Cose $10

R28 LED Enclosed Case Lighting Refrigerated Door $30

R30 LED Enclosed Case Lighting Freezer Door $30

Refrigeration Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 35

Food Service Beverage and Snack Machine Controls Incentives are offered for refrigerated vending machines that contain non-perishable bottled and canned beverages Controller for both types of systems must include a passive infrared occupancy sensor to turn off fluorescent lights and other energized machine systems when the surrounding area is unoccupied for 15 minutes or longer For the refrigerated machines the control logic may include periodic power up at 2-hour intervals or longer to maintain product temperature and provide compressor protection

ENERGY STARreg Refrigerated Beverage Vending Machines Incentives are offered for ENERGY STARreg beverage vending machines Qualifying machines can be found at httpswwwenergystargovproductsothervending_machines

ENERGY STARreg Electric Steam Cooker This measure applies to the installation of electric ENERGY STAR steam cookers as either a new item or replacement for an existing unit Gas steam cookers are not eligible The steam cookers must meet minimum ENERGY STAR efficiency requirements A qualifying steam cooker must meet a minimum cooking efficiency of 50 percent and meet idle energy rates specified by pan capacity

ENERGY STARreg Electric Combination Oven This measure applies to electric ovens capable of handling single 12 x 20 x 25 pan per rack

ENERGY STARreg Commercial Convection Oven The oven must meet or exceed heavy load potato cooking energy efficiency of greater than 70 utilizing ASTM Standard F149 Applies only to electric ovens

ENERGY STARreg Commercial Fryers The commercial fryer must have a tested heavy load (French fry for large vats) cooking energy efficiency of greater than 80 utilizing American Society for Testing and Materials (ASTM) Standard F1361 for commercial fryers and ASTM Standard F2144 for large vat fryers Multiple vat configurations are paid per qualifying vat ENERGY STAR maintains a list of qualifying products and specifications at httpwwwenergystargov

ENERGY STARreg Commercial Hot Holding Cabinet Energy STAR rating electric

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 36

Food Service amp Other Measures FoodOther

Measure Incentive Unit Incentive

Measure Code Unit

F01 Beverage Machine Controls Unit $25

F02 Snack Machine Controls Unit $20

F03 ENERGY STARreg Refrigerated Beverage Vending Machir Unit $125

F04 ENERGY STARreg Commerc ial Steam Cooker Unit $200

F05 ENERGY STARreg Electric Combination Oven Unit $200

F06 ENERGY STARreg Commercial Electric Convection Oven Unit $150

F07 ENERGY STARreg Commerc ial Fryers Unit $100

F08 ENERGY STARregCommerc ial Hot Holding Cabinet Unit $200

Food Service Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 37

Motors and Variable Frequency DrivesEarly Replacement Motors For constant speed and uniformly loaded motors this measure applies to the replacement of old motors with new energy efficient motors of the same rated horsepower Old motors must be less than 15 years Replacements where the old motor and new motor have different horsepower ratings are considered custom measures Motors with variable speeds variable loading or industrial-specific applications are also considered custom measures

Motors Incentive Table Motors

Measure Code

HP Incentive per Motor

M01 15 - 10 $40 M02 11 - 50 $100 M03 51-100 $150 M04 gt100 $300

Only VFDs on unitary systems are eligible Non-unitary systems must be submitted as a custom measure Soft start motors are not eligible

Variable Frequency Drives on HVAC Fan Applications Incentives are offered for installing VFDs on existing HVAC fans that do not have pre-existing VFDs This measure applies to HVAC supply and return fans only All other fans including cooling tower fans must be submitted as custom measures Manually fixed speed settings on HVAC fans must be submitted via custom application The VFD must control motor speed automatically in response to pressure flow temperature or other variable signal The installation of a VSD must accompany the permanent removal or disabling of any throttling devices such as inlet vanes bypass dampers and throttling valves etc The incentive is offered per controlled HP

Variable Frequency Drives on Pump Applications Incentives are offered for installing VFDs on existing chilled water pumps and heating hot water pumps that do not have existing VFDs This measure applies to chilled water pumps and heating hot water pumps only All other pumps must be submitted as custom measures Manually fixed speed settings on pumps must be submitted via custom application The VFD must control motor speed automatically in response to pressure flow temperature or other variable signal The installation of a VSD must accompany the permanent removal or disabling of any throttling devices such as throttling valves The incentive is offered per controlled HP

Variable Speed Control for Kitchen Exhaust Hoods The measure consists of installing a new VSD in conjunction with a sensor control system that varies the exhaust rate of kitchen ventilation (exhaust andor makeup air fans) based on the heat and effluent output from the cooking appliances (ie the more heat and smokevapors generated the more ventilation needed) This involves installing a temperature sensor in the hood exhaust collar andor an optic sensor on the end of the hood that senses cooking conditions and allows the system to automatically vary the rate of exhaust to match requirements by adjusting the fan speed accordingly

Variable Speed Drives for Process or Other Equipment VFD must be used in conjunction with a process (non HVAC) application To qualify for this incentive the driven equipment must operate at least 2000 hours per year Redundant or back- up units do not qualify VFDs replacing existing VFDs do not qualify The VFD must control motor

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 38

speed automatically in response to pressure flow temperature or other variable signal VFDs installed as ldquosoft startrdquo without automatic manual closed loop speed control do not qualify The installation of a VFD must accompany the permanent removal or disabling of any throttling devices such as throttling valves The incentive is per controlled HP and only applies to controlled motors less than 50 HP

VSDVFD Incentives Table VFD

Measure Code

Measure Unit Incentive per Unit

Fan Application

V01 VFD on HVAC Fan HP $25 Pump Application

Variable Speed Control for Kitchen Exhaust Hoods

Variable Speed Drives for Process or Other Equipment

V02 VFD on Chilled Water Pumps HP $25 V03 VFD on Heating Hot Water Pumps HP $25

V04 Kitchen Exhaust Fan Retrofit Hood HP $500

V05 Process Motor lt 50 HP HP $50

Domestic Hot Water Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater This measure documents the energy savings attributed to converting from a standard electric water heater to an ENERGY STAR natural gaspropane-fired water heater or a standard oil-fired water heater with an Energy Factor of 0585

Heat Pump Water Heater This includes heat pump water heaters with energy factors meeting ENERGY STAR criteria The measure described here involves a direct retrofit of a resistive electric water heater with a heat pump water heater It does not cover systems where the heat pump is a pre-heater or is combined with other water heating sources More complicated installations can be treated as custom projects

Low Flow Pre-Rinse Spray Valve This measure applies to efficient low flow pre-rinse sprayers in grocery and food service applications The most likely areas of application are kitchens in restaurants and hotels Only premises with electric water heating may qualify for this incentive In addition the replacement pre-rinse spray nozzle must use less than 16 gallons per minute with a cleanability performance of 26 seconds per plate or less Low flow pre-rinse sprayers reduce hot water usage and save energy associated with water heating

Domestic Hot Water Incentive Table

Measure Code Measure Unit Retrofit Incentive per

Unit

W01 Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater Unit $100

W02 Heat Pump Water Heater Unit $100 W03 Low-Flow Pre-Rinse Spray Valve Valve $17

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 39

Compressed Air SystemsNo-loss Condensate Drain No-loss Condensate Drains are controlled by a sensor that monitors the level of condensate and only open when there is a need to drain condensate They close before compressed air is allowed to escape This measure is targeted to non-residential customers whose equipment is a timed drain that operates on a pre-set schedule Acceptable baseline conditions are compressed air systems with standard condensate drains operated by a solenoid and timer

Air-Entraining air nozzle This measure is targeted to non-residential customers whose compressed air equipment uses stationary air nozzles in a production application with an open copper tube of 18rdquo or 14rdquo orifice diameter Energy efficient conditions require replacement of an inefficient non-air entraining air nozzle with an energy efficient air-entraining air nozzle that use less than 15 CFM at 100 psi for industrial applications

Storage Tanks for LoadNo Load Screw Compressors This measure protocol applies to the installation of air receivers with pressureflow controls to loadno load compressors Loadno load compressors unload when there is low demand The process of unloading is done over a period of time to avoid foaming of the lubrication oil Using a storage tank with pressureflow control will buffer the air demands on the compressor Reducing the number of cycles in turn reduces the number of transition times from load to no load and saves energy The baseline equipment is a loadno load compressor with a 1 galcfm storage ratio or a modulating compressor with blowdown The high efficiency equipment is a loadno load compressor with a minimum storage ratio of 4 gallons of storage per cfm

Cycling Refrigerated Thermal Mass Dryer When air is compressed water vapor in the air condenses and collects in liquid form Some of this condensate collects in the air distribution system and can contaminate downstream components such as air tools with rust oil and pipe debris Refrigerated air dryers remove the water vapor by cooling the air to its dew point and separating the condensate Changes in production and seasonal variations in ambient air temperature lead to partial loading conditions on the dryer Standard air dryers use a hot gas bypass system that is inefficient at partial loads A Cycling Thermal Mass Dryer uses a thermal storage medium to store cooling capacity when the system is operated at partial loads allowing the dryer refrigerant compressor to cycle

This measure is targeted to non-residential customers whose equipment is a non-cycling refrigerated air dryer with a capacity of 600 cfm or below Acceptable baseline conditions are a non-cycling (eg continuous) air dryer with a capacity of 600 cfm or below The replacement of desiccant deliquescent heat-of-compression membrane or other types of dryers does not qualify under this measure

Variable Speed Air Compressor This type of compressor uses a special drive to control the speed (RPM) of the unit which in turn saves energy compared to a fixed speed equivalent

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 40

No-loss Condensate Drain Air-Entraining Air Nozzle Cycling Refrigerated Thermal Mass Dryer

Compressor Incentive per

Equipment Type Units Quantity Daily Operating Unit

Hours

CA04 Storage Tanks for LoadNo Load Screw

Compressor HP $10 Compressors

CA05 Variable Speed Air Compressor

Compressor HP $30

CA06 Compressed Air System Optimization

Compressor HP $50

Compressed Air System Optimization The submitted optimization measures must be identified in an Air System Audit or equivalent study to be eligible The measures must demonstrate energy savings as evaluated by a Program Engineer Additionally measures must also fall under one or more of the category below to be eligible

1) Install storage Receivers (new receivers only replacing existing storage receivers are ineligible)

2) Compressor control (must demonstrate improvement in partial load efficiency of the compress air system including reduceeliminate partially loaded units)

3) Dryer control 4) Source pressure reduction 5) Right-sizing distribution components such as piping filters regulators

connectors and hoses (routine maintenance replacements are ineligible) 6) Leakage detection and repair 7) Eliminate low-efficiency end-usages of compressed air 8) Heat recovery (most reduce electricity consumption of the replaced heat source)

Compressed Air Systems Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 41

lt65000 Btuh

~ 65000 Btuh and lt135000 Btuh

135000 Btuhand lt240000 Btuh

240000 Btuh and lt760000 Btuh

760000 Btuh

154

142

135

125

123

Chiller Capacity Path APath B efficiency (kWton )

lt 150 tons

~150 tons and lt300 tons

300 tons and lt400 tons

400 tons and lt600 tons

600 tons

lt75 tons

~75 tons and lt150 tons

~150 tons and lt300 tons

~300 tons and lt600 tons

600 tons

0610 FU0695 FL and 0550 IPLV0440 IPLV

0610 FU0635 FL and 0550 IPLV0400 IPLV

0560 FU0595 FL and 0520 IPLV0390 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

Path APath B efficiency (kWton )

0750 FU0780 FL and 0600 IPLV0500 IPLV

0720 FU0750 FL and 0560 IPLV0490 IPLV

0660 FU0680 FL and 0540 IPLV0440 IPLV

0610 FU0625 FL and 0520 IPLV0410 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

Data Centers Data Center incentives are available for facilities ranging in size from office server closets to large standalone facilities

Air Cooled Chiller Path APath B EER (BtuWh) lt150 tons 101 FL97 FL and 137 IPLV158 IPLV ge150 tons 101 FL97 FL and 140 IPLV161 IPLV

Air Cooled Chiller without Condenser Air-cooled chillers without condenser must be rated with matching condensers and comply with air-cooled chiller efficiency requirements

Computer Room Air Conditioner

Computer Room Air Handler Variable Speed Replacing constant speed CRAH with VSD CRAH

Water Cooled Centrifugal Chiller

Water Cooled Positive Displacement or Reciprocating Chiller

Uninterruptible Power Supply Must be Energy Star Certified UPS or have full load efficiency rating

ge948 for 20-100 kVA ge978for ge100 kVA

Mainframe Refresh The rated efficiency of the replacement Mainframes power supply must be at least 8 more

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 42

- Equipment Type Units IncentiveUnit

D1 Air Cooled Chiller Ton $4000 D2 Air Cooled Chiller W ithout Condenser Ton $2000 D3 Computer Room Air Conditioner Ton $3000 D4 Computer Room Air Handler Variable Speed Ton $1000 D5 Water Cooled Centrifugal Chiller Ton $3000 D6 Water Cooled Positive Displacement or Reciprocatin $3000 D7 Uninterruptible Power Supply 20-100 kVA $1000 D8 Uninterruptible Power Supply gt 100 kVA $1000 D9 Mainframe Refresh $2000

D10 Server Refresh $2000 D11 PC Power Managment System $600 D12 HVAC System Optimization $005 D1 3 HoUCold Aisle Containment kWh saved $005 D14 Server Virtualization kW reduction $40000 D1 5 Thin Clients Units $500

efficient compared to the existing Mainframes power supply The replacement Mainframe if Inactive must be decommissioned and removed from the Data Center

Server Refresh Replacement servers must be ENERGY STARreg certified Replacement servers power supply must be 5 more efficiency compared to the power supply of the replaced servers The replaced server must be decommissioned and removed from the data center

HVAC System Optimization Final system must have these features

-Implementation of free cooling by the addition of an economizer system -Conversion of constant speed CRACCRAH into variable speed operations using VFDs and additional control functionalities and -Elevation of exhaust air temperature

HotCold Aisle Containment Includes both Hot and Cold Aisles Installing new containment measures not replacing already existed aisle containment Plenum-only installations not eligible Must result in higher difference between the return air (hot aisle) and supply air (cold aisle) temperatures measured at rack intake and exhaust locations

Server Virtualization Minimum of consolidating 5 Servers virtualized into one Server The virtualized servers if inactive are removed from the Data Center

Thin Clients Must be ENERGY STAR certified thin clients Decommissioned clients are removed from the Data Center

Data Center Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 43

Whole Building Systems Whole Building Systems Approach

The Whole Building Systems approach is intended to encourage integrated energy efficient designs by providing enhanced incentives to the customer who addresses overall energy performance Owners of eligible and qualifying new construction and major renovation projects can receive Whole Building Systems incentives when energy modeling indicates the projectrsquos performance is over 10 better than the ASHRAE 901-2007 Savings from eligible electric end-uses in kilowatt hours define the amount of financial incentive Energy savings achieved through renewable energy sources are not counted toward project energy savings and are not included in the savings basis Incentive reservations obtained during the design phase of a project will be honored for up to 24 months

How to Apply for Whole Building Systems Incentives Before construction begins bull A Pre-notification Application must be submitted documenting the Owners intention to

seek Whole Building Systems incentives bull The Owner must confirm the goals and energy efficiency strategies being pursued by the

design team on the completed Pre-notification Worksheet (Checklist tab) and in the project Summary (Whole Building Performance Summary tab)

bull Submit executable building modeling software files bull Submit the Whole Building Performance Summary worksheet energy simulation model

inputs and outputs and supporting documentation bull Receive confirmation and eligibility notification from the PECO Smart Ideas team and

receive an incentive reservation bull The final incentive paid may differ from the reserved incentive amount The final

incentive will be calculated based on site-verified equipment installation and performance The Owners final application and complete documentation must be received within 6 months of equipment installation or certificate of occupancy whichever is later

bull An executable energy model and model output demonstrating compliance with the criteria of ASHRAE 901-2007 Appendix G will be required and the equipment data sheets LED lighting fixtures must be on the DLC or Energy STAR qualified products list (QPL) to be eligible LED fixtures not on the DLC or Energy STAR QPL has the option of submitting LM79 and LM80 test reports for evaluation against DLC and Energy STAR eligibility criteria

During the construction period bull Owner and design team continue to work closely with their chosen contractor to assure

energy efficiency measures are included and installed in the completed building

When the building is constructed and operational bull Complete the Owner final application Request an equipment verification site visit by the

PECO Smart Ideas team Equipment must be installed and fully operational o Program staff will schedule a site visit and utilize submitted documentation and

measurement tools to verify that the installation follows the submitted energy simulation model

bull When PECO confirms that there are no significant changes to the installed equipment payment of the reserved incentive will be made to the Owner within 6 weeks

bull If changes from the proposed design energy simulation are found the Owner and design team will be notified of the reduced incentive amount a period of 20 calendar days will

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 44

Improvement Incentive per Sq Ft

over Code

~11 to lt20 $0155

~20 to lt30 $0233

~30 to lt40 $0350

~40 to lt60 $0525

~60 $0700

be allowed for supplemental information to be provided if no additional information is received by PECO Smart Ideas team the reduced incentive payments will be made and sent to the Owner if additional clarification and information is available program staff will work diligently to resolve the discrepancies and arrive at a reasonable incentive adjustment with the customer

Payments made by PECO Smart Ideas are final

Customer Eligibility The Owner of the proposed new building project must be a customer of PECO and receive delivery of electric service from PECO to receive kilowatt-hour based incentives Please note that electricity supply can be provided by any vendor

Project Eligibility bull The project must be a new construction or major renovation Major renovations involving

the removal and redesign of at least two building systems (such as interior lighting and mechanical systems) may apply for Whole Building Systems incentives

bull To qualify for incentives projects must demonstrate energy efficiency enhancements that achieve at least 11 improvement in the proposed design versus the standard baseline

bull The Owner must submit a Pre-approval Application to the program at the stage where changes for increased energy efficiency are still feasible and construction has not been completed

bull Projects receiving Whole Building Systems incentives are not eligible to receive other incentives such as the prescriptive or custom program incentives for the same scope

bull Project components that are NOT eligible for consideration as a basis for PECO Smart Ideas include the following o Alternative fuel sources (eg use of gas or oil equipment in lieu of electric) Please note

that combined heat and power (CHP) systems will be incentivized for the electricity they produce

o Renewable energy sources (eg solar wind biomass) bull Ineligible savings include exterior lighting process receptacle miscellaneous loads and

other unregulated end-uses Custom incentives are available for new construction exterior lighting

Whole Building Systems Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 45

Custom Project Specifications Instructions for Energy Savings Calculations for Custom Projects Custom projects must involve measures that result in a reduction in electric energy use (kWh) Electricity savings may result from either efficiency improvements or fuel switching Custom Incentives are based on the first year kilowatt-hour savings Custom applications must be accompanied by detailed engineering calculations that document the annual total energy savings

The following serve as guidelines for the minimum required documentation

Equipment Information Submittals bull A list of the present and proposed equipment and components to be installed

including manufacturerrsquos catalogmodel number bull Manufacturerrsquos specification sheets showing capacities and performance for all major

components

Energy Savings Calculations Provide calculations documenting the predicted energy consumption of the existing (or baseline) and proposed system using appropriate analytical tools and clearly stated assumptions Calculations may be performed by ldquohandrdquo but spreadsheet analysis or more rigorous modeling is preferred All analysis should be provided in electronic format All assumptions such as operating hours existing and proposed equipment operational details must be presented Engineering algorithms and procedures from recognized technical organizations such as ASHRAE SMACNA ANSI etc must be used Use rated performance factors tested under accepted procedures specified by recognized rating agencies such as AHRI ANSI ASTM etc Provide an explanation when equipment performance rating conditions vary from standard conditions

In support of the calculations extensive documentation must be provided that provides the basis for the savings estimates The documentation must provide information on the equipment operating schedule daily and seasonal load profile and baseline AND energy efficient equipment performance at the operating loads Typical documentation for custom projects often includes bull Engineering or architectural drawings and ldquoequipment schedulerdquo sheets bull Component specification sheets that include part load efficiency or performance

factors bull Spreadsheet calculations or inputoutput files and results from system modeling or

other engineering analysis using accepted engineering algorithms and practices bull Log sheets trend logs from a building management system or other operating

documentation that are often necessary to document operating hours and equipment loading and used as a basis for the calculations (in some cases short term monitoring may be required to document the load profile)

bull Control sequence of operations that are necessary where controls play a part in the savings equation

Additional documentation other than that described in the application may be required for program participation Larger projects may also require pre- and post-project sub metering or monitoring of loads andor power input as part of another measurement and verification activity to demonstrate the actual energy savings that are realized

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 46

Baseline for Custom Analysis Where equipment is replaced prior to the end of its rated service life in order to achieve energy savings the existing equipment performance may be used as the baseline in the energy savings calculations Where equipment is replaced due to failure or for other reasons (such as obsolescence or a need for more capacity) the baseline performance used in the savings calculation should be either the minimum performance that would be required by code for that equipment type and application (where a code applies) or the performance of the equipment that would have been selected as the customers standard practice when a code does not apply

Baseline or Existing System Summary On custom worksheet on application form include make model number name plate information (such as operating voltage and rated full load amps) rated capacity quantities equipment condition and age facility operating hours equipment operating schedule and load curves If needed attach separate sheets

All decisions regarding incentives for custom projects are in the sole discretion of PECO

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 47

APPENDIX PROGRAM UPDATES SUMMARY (Q1 2017) Multifamily Nursing Home and Assisted Living retrofit customers need to apply for incentives through the PECO Smart Ideas Multi-Family Program administered by Franklin Energy For more information please contact Taylor Adler at tadlerfranklinenergycom or call 1-844-4BIZ-SAVE Multifamily Nursing Home and Assisted Living new construction customers can proceed with applying for incentives here

Revised Incentives

Data Centers

Measure Incentive Effective Immediately Previous Incentive

Air-cooled chiller for data centers $40ton $10ton Air-cooled chiller without condenser for data centers $20ton $10ton

Computer room air conditioner $30ton $7ton Water-cooled centrifugal chiller for data centers $30ton $5ton Water-cooled positive displacement or reciprocating chiller for data centers

$30ton $5ton

Uninterruptible power supply 20-100 kVA $10kVA $6kVA Uninterruptible power supply gt100 kVA $10kVA $1kVA Mainframe refresh $20kW installed $5kW installed Server refresh $20kW installed $4kW installed Server virtualization $400kW reduction $4kW reduction Thin clients $5units $4units

Lighting (Effective Immediately)

Measure Incentive Effective Immediately Specification Previous

Incentive Specification

New construction exterior LED outdoor flood light LED parking garage and canopy lighting LED polearm mounted parking and roadway lighting LED wall mount fixture

$005kWh (custom)

Lighting Power Density (LPD) Requirements Unchanged

$10-54 fixture

Lighting Power Density (LPD) (Wft2) by Space Type or Building Area

LED Replacement Lamps (Tubes) 2

$250lamp 5 Min Watts Reduced

$250lamp 6 Min Watts Reduced

LED Replacement Lamps (Tubes) 4

$400lamp 10 Min Watts Reduced

$400lamp 12 Min Watts Reduced

Permanent Fixture Removal $010Watt removed

Clarification of calculation to represent actual Wattage removed

$010Watt removed

Lighting (Effective 6117)

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 48

Measure Incentive Effective 6117 Specification Previous

Incentive Previous Specification

Interior LED high-bay fixtures andor retrofit kits if lt 20000 LED Lumens

$50fixture 150 Min Watts Reduced

$75fixture 150 Min Watts Reduced

Interior LED high-bay fixtures andor retrofit kits if gt 20000 LED Lumens

$75fixture 225 Min Watts Reduced

$75fixture 150 Min Watts Reduced

New Incentives

Compressed Air

Measure New Incentive Effective Immediately Variable speed air compressor $30compressor HP Compressed air system optimization $50compressor HP

HVAC

Measure New Incentive Effective Immediately ECM circulation pump $50pump Retro-commissioning cooling systems $750ton Retro-commissioning whole building $010square foot Energy management system $25ton Demand controlled ventilation $25ton Water-cooled air conditioner $22ton

Food Service

Measure New Incentive Effective Immediately Combination oven $200unit ENERGY STARreg commercial convection oven $150unit ENERGY STARreg commercial fryers $100unit ENERGY STARreg commercial hot holding cabinet $200unit

Refrigeration

Measure New Incentive Effective Immediately Air-cooled refrigeration condenser $10ton Oversized condenser with VFD $10ton Case light occupancy controls $750door

Lighting

Measure New Incentive Effective Immediately Interior central lighting controls $00175sq foot

Motors and Drives

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 49

-

Measure New Incentive Effective Immediately VFD for dust collection system motor $50HP

Application Clarifications and Revised Requirements

Clarification of LED Eligibility for New Construction or Retrofit Projects

LED Eligibility is determined by whether lighting products are listed in either the DesignLights Consortium (DLC) Qualified Products List of commercial-grade LED luminaires or the US Environmental Protection Agency database of ENERGY STAR certified products For products not yet listed contractors may submit LM79 and LM80 test reports PECO Smart Ideas engineers will review test reports to determine if the product in question meets performance specifications

Revised W 9 Requirement

W-9 forms EIN numbers are no longer required

Deletion of erroneous statement in New Construction Lighting

The following statement from previous Business Manual has been deleted ldquoThe minimum lighting power density used to calculate the incentive shall be no lower than 50 of the ASHRAE 901-2007 valuerdquo

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 50

  • Commercial amp Industrial Program Application Manual
    • Follow This Easy Process
      • Pre-Approval Application Checklist
      • Final Application Checklist
          • Terms and Conditions
            • Program Effective Dates
            • Program and Project Eligibility
            • Incentive Payment Limits
            • Application Review Process
            • Inspections andor PUCrsquos Statewide Program Evaluation
            • Requirements for Custom Project Electricity Savings Calculation
            • Tax Liability
            • No Endorsement
            • Warranties
            • Limitation of Liability
            • Assignment
            • Customerrsquos Certification
            • Termination
            • Acknowledgement
              • Retrofit Lighting Solutions
                • General Linear Fluorescent Lamp and Ballast Specification Requirements
                • LED Lamps and Fixtures
                • Minimum Watts Reduced
                • Linear LED (Tubes)
                • Permanent Fixture Removal
                  • LED Traffic Signals
                    • LED Traffic Signals Incentive Table
                      • New Construction Lighting Specifications
                        • New Construction Lighting Incentives Table
                          • New Construction Lighting Power Density Code
                              • Exterior New Construction Lighting
                              • HVAC Equipment
                                • Air-Source Air Conditioners and Air-Source Heat Pumps
                                • Package Terminal Systems (Replacements)
                                • Ductless Mini-Split Heat Pump lt54 Tons
                                • Geothermal Heat Pump
                                  • Other HVAC Equipment
                                    • Hotel Guest Room Occupancy Sensor
                                    • ECM Circulation Fan
                                    • ECM Circulation Pump
                                    • Retrocomissioning Cooling Systems
                                    • Retrocomissioning Whole Building
                                    • Energy Management System
                                    • Demand Controlled Ventilation
                                    • Other HVAC Incentives Table
                                      • Unitary HVAC Chillers
                                        • Air-Cooled Chillers Water Cooled Positive Displacement Reciprocating Chillers and Water Cooled Centrifugal Chillers
                                          • Refrigeration
                                            • Anti-Sweat Heater Controls
                                            • Evaporator Fan Controls
                                            • Floating Head Pressure Controls
                                            • Automatic Door Closers for Walk-In Coolers and Freezers
                                            • EC Motor for Walk-inReach-in Refrigerated cases or Freezer cases
                                            • ENERGY STAR Solid Door Freezer and Glass Door Freezer and Refrigerators
                                            • Refrigeration Suction Pipe Insulation
                                            • Night Cover
                                            • Strip Curtain on Walk-In CoolerFreezer
                                            • Evaporator Coil Defrost Control
                                            • Variable Speed Refrigeration Compressor
                                            • Add Doors to Open Refrigerated Cases
                                            • Door Gaskets
                                            • Zero Energy Doors
                                            • Air Cooled Refrigeration Condenser
                                            • Oversized Condenser with VFD
                                            • Case Light Occupancy Controls
                                            • LED Open Case Lighting
                                            • LED Enclosed Case Lighting Refrigerated
                                            • LED Enclosed Case Lighting Freezer
                                              • Food Service
                                                • Beverage and Snack Machine Controls
                                                • ENERGY STARreg Refrigerated Beverage Vending Machines
                                                • ENERGY STARreg Electric Steam Cooker
                                                • ENERGY STARreg Electric Combination Oven
                                                • ENERGY STARreg Commercial Convection Oven
                                                • ENERGY STARreg Commercial Fryers
                                                • ENERGY STARreg Commercial Hot Holding Cabinet
                                                  • Motors and Variable Frequency Drives
                                                    • Early Replacement Motors
                                                    • Variable Frequency Drives on HVAC Fan Applications
                                                    • Variable Frequency Drives on Pump Applications
                                                    • Variable Speed Control for Kitchen Exhaust Hoods
                                                    • Variable Speed Drives for Process or Other Equipment
                                                      • Domestic Hot Water
                                                        • Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater
                                                        • Heat Pump Water Heater
                                                        • Low Flow Pre-Rinse Spray Valve
                                                        • Domestic Hot Water Incentive Table
                                                          • Compressed Air Systems
                                                            • No-loss Condensate Drain
                                                            • Air-Entraining air nozzle
                                                            • Storage Tanks for LoadNo Load Screw Compressors
                                                            • Cycling Refrigerated Thermal Mass Dryer
                                                            • Variable Speed Air Compressor
                                                            • Compressed Air System Optimization
                                                            • Compressed Air Systems Incentive Table
                                                              • Data Centers
                                                                • Air Cooled Chiller
                                                                • Air Cooled Chiller without Condenser
                                                                • Computer Room Air Conditioner
                                                                • Computer Room Air Handler Variable Speed
                                                                  • Replacing constant speed CRAH with VSD CRAH
                                                                    • Water Cooled Centrifugal Chiller
                                                                    • Water Cooled Positive Displacement or Reciprocating Chiller
                                                                    • Uninterruptible Power Supply
                                                                    • Mainframe Refresh
                                                                    • Server Refresh
                                                                      • Whole Building Systems
                                                                        • Whole Building Systems Approach
                                                                        • How to Apply for Whole Building Systems Incentives
                                                                        • Customer Eligibility
                                                                        • Project Eligibility
                                                                        • Whole Building Systems Incentives Table
                                                                          • Custom Project Specifications
                                                                            • Instructions for Energy Savings Calculations for Custom Projects
                                                                            • Equipment Information Submittals
                                                                            • Energy Savings Calculations
                                                                            • Baseline for Custom Analysis
                                                                            • Baseline or Existing System Summary

wwwpecocomsmartideasThe method and assumptions used by the applicant to calculate the annual savings will be reviewed by PECO PECO has sole and final determination of the annual energy savings to be used in calculating the incentive amount PECO also reserves the right to require specific measurement and verification activities including monitoring both before and after the retrofit and to base the incentive payment on the results of these activities

PECO may need to conduct inspections both before and after the retrofit projects to verify equipment and operation conditions Pre-approval application must be submitted while the existing equipment is still in operation in order to allow PECO the opportunity to view the existing equipment

Tax Liability

Incentives may be taxable for most taxpayers If the incentive is more than $600 it will be reported to the IRS and the customer will be provided with an IRS form 1099 unless the customer is exempt PECO is not responsible for any tax liability that may be imposed on any customer as a result of the payment of program incentives All customers must supply their Federal Tax Identification number to PECO in order to receive a Program Incentive Please consult with your tax professional for information on the tax treatment of the incentives

No Endorsement

PECO does not endorse support or recommend any particular manufacturer product or system design in promoting this program and PECO does not guarantee any specific level of energy savings with respect to any product system design or energy efficiency measure

Warranties

PECO DOES NOT WARRANT THE PERFORMANCE OF INSTALLED EQUIPMENT ANDOR SERVICES RENDERED AS PART OF THIS PROGRAM EITHER EXPRESSLY OR IMPLICITLY NO WARRANTIES OR REPRESENTATIONS OF ANY KIND WHETHER STATUTORY EXPRESSEDOR IMPLIED INCLUDING WITHOUT LIMITATIONS WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE REGARDING EQUIPMENT OR SERVICES PROVIDED BY A MANUFACTURER OR VENDOR CONTACT YOUR VENDORSERVICES PROVIDER FOR DETAILS REGARDING PERFORMANCE AND WARRANTIES

Limitation of Liability

By virtue of participating in this program customers agree to waive any and all claims or damages against PECO except the receipt of the program incentive if eligible Participating Customers agree that PECOrsquos liability in connection with this program is limited to paying the program incentive specified Under no circumstances shall PECO its representatives agents or subcontractors be liable for any lost profits special punitive consequential or incidental damages or for any other damages or claims connected with or resulting from participation in this program

Assignment

Customers may assign a portion or all of their program incentive payment to a specified vendor

Customerrsquos Certification Customer certifies that heshe purchased and installed the equipment listed in the application Customer agrees that all information is true and that heshe has conformed to all of the program and equipment requirements listed in the application

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 9

Termination

PECO reserves the right to extend modify (this includes modification of program incentive levels) or terminate this program without prior or further notice

Acknowledgement

I have read understood and am in compliance with all rules and regulations concerning this incentive program I certify that all information provided is correct to the best of my knowledge and I give PECO permission to share my records with the Pennsylvania PUC and agents representatives and contractors it selects to manage coordinate or evaluate the program Additionally I hereby authorize PECO to have reasonable access to my property to inspect the installation and performance of the equipment and installations that are eligible for incentives under the guidelines of the program

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 10

Retrofit Lighting Solutions

General Linear Fluorescent Lamp and Ballast Specification Requirements 32w 4ft HPT8 and reduced wattage T8 lamps must be listed on the Consortium of Energy Efficiency (CEE) product list or must meet CEE standards For further information visit wwwcee1org

LED Lamps and Fixtures The integral lamp or fixture must appear on the Energy Star Qualified Products List or the Design Lights Consortium Qualified Products List

bull Energy Star Qualified Fixture Product List httpwwwenergystargov bull Energy Star Qualified Integral LED lamps httpwwwenergystargov bull Design Lights Qualified Product List httpwwwdesignlightsorg

Minimum Watts Reduced Energy efficient fixtureslamps are required to be lower in load than existing fixtureslamps by specified levels the Minimum Watts Reduced Each lighting measure has its own Minimum Watts Reduced that must be met as eligibility requirement These levels are listed in the lighting worksheet ldquoLighting Incentives Tablersquo tab and reproduced below

Linear LED (Tubes) Linear LED lamps must be listed on the Design LightsTM Consortium (DLC) Qualified Products List

Type A LEDs bull Type A LED linear lamps are powered by a fluorescent ballast bull If present existing magnetic ballast must be removed and replaced with a compatible energy- efficient electronic ballast bull DLC Primary Use Requirement ndash DLC-listed equipment must be classified with one of the following Primary Use designations

o Replacement Lamps (Plug and Play) (UL Type A) bull Label must be affixed to the interior of fixture in a prominent location Label should indicate that the fixture has been retrofitted with

TLEDs and that fluorescent lamps should not be installed as replacements

Type B LEDs bull Type B LED tubes are powered by an internal driver bull Existing fluorescent ballast must be removed and fixturersquos incoming power wires are connected directly to the lamp sockets Strict

adherence to installation instructions is critical when rewiring existing fixtures

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 11

bull The LED linear lamps must be delivered as part of a UL 1598C Classified Luminaire Retrofit Kit with instructions explaining the LED linear lamps must be installed on a luminaire that is already UL Listed

bull The retrofitted luminaire must be clearly identified using the label included with the Retrofit Kit indicating that the luminaire has been modified and can no longer operate the originally intended fluorescent lamp(s)

Type C LEDs

bull Type C LED linear lamps are powered by an external driver bull Existing fluorescent ballast must be removed and replaced with a compatible external driver bull DLC Primary Use Requirement ndash DLC-listed equipment must be classified with one of the following Primary Use designations

o 2-lamp External Driver Lamp-Style Retrofit Kits (UL Type C) o 3-lamp External Driver Style Retrofit Kits (UL Type C) o 4-lamp External Driver Lamp-Style Retrofit Kits (UL Type C)

bull Technical specifications (manufacturerrsquos cut sheet) for the driver must be submitted with the application

Permanent Fixture Removal This measure is to be used only in conjunction with lighting retrofits and is intended for spaces that are currently over lit Incentives are paid $010watt reduced only on fixtures removed not on total watts reduced for entire projects Overall net lumen reduction must be achieved in order to qualify for a permanent fixture removal incentive

Example

(20) Existing fixtures at 10000 lumens each = 200000 lumens

(14) Proposed fixtures at 15000 lumens each = 210000 lumens

Since there is not a net reduction in lumens the six fixtures removed would not be eligible for a permanent fixture removal incentive

It is encouraged that spaces meet recommended foot-candle levels as detailed by IESNA Lighting Design Guide A Program Engineer will evaluate lumens reduction based on the type of fixtures removed and the DLC lumens rating of the fixtures installed

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 12

RETROFIT INTERIOR LIGHTING TABLE

Measure Code

Min Measure Name Watts Incentive Unit

Reduced Technical Specifications

CFL Lighting

CFL1A ENERGY STAR Hard-Wired CFL fixture Indoor AccentTrack 20 $250 lamp

Only complete new fixtures or modular hardwired retrofits with hardwired electronic ballasts qualify

CFL ballast must be programmed start or programmed rapid start with a power factor (PF) ge 090 and a total

harmonic distortion (THD) le 20 Screw-in CFLs are not eligible for this incentive

CFL1B ENERGY STAR Hard-Wired CFL fixture Indoor Directional WallCeiling Mount 20 $250 lamp

CFL1C ENERGY STAR Hard-Wired CFL fixture Indoor Omni-Directional WallCeiling Mount 20 $250 lamp

CFL2A ENERGY STAR Hard-Wired CFL fixture Indoor Portable LampTorchiere 20 $1 lamp

CFL2B ENERGY STAR Hard-Wired CFL fixture Indoor Recessed Downlight 20 $1 lamp

CFL2C ENERGY STAR Hard-Wired CFL fixture Indoor Recessed Downlight Retrofit Module 20 $1 lamp

CFL2D ENERGY STAR Hard-Wired CFL fixture Indoor Under CabinetStrip 20 $1 lamp

CFL3A ENERGY STAR Hard-Wired CFL fixture Outdoor Directional WallCeilingGroundPole Mount 30 $3 lamp

CFL3B ENERGY STAR Hard-Wired CFL fixture Outdoor Omni-Directional WallCeilingGroundPole Mount 30 $3 lamp

CFL3C ENERGY STAR Hard-Wired CFL fixture Outdoor Recessed Downlight 30 $3 lamp

CFL3D ENERGY STAR Hard-Wired CFL fixture Outdoor Recessed Downlight Retrofit Module 30 $3 lamp

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 13

Fluorescent Lighting FL1 Interior T5 New Fluorescent Fixture w Electronic Ballast 11 $5 fixture Any T5 is eligible

FL2 T5HO High-Bay Fixture 54 $25 fixture Fixture efficiency must be gt 90

High bay fixtures must be installed at least 15ft above finished floor

FL3 HPT8 High-Bay Fixture 82 $20 fixture Must use High Ballast Factor (gt96) Fixture efficiency must be gt= 85

High bay fixtures must be installed at least 15ft above finished floor

FL4 HPT8 Fixture 20 $5 fixture Must use Low Ballast Factor (lt80)

FL5 RW T8 Lamp - Lamp only 10 $3 lamp Existing T8 fixture re-ballasting to a higher ballast factor are not eligible

HID Measures HID1 Ceramic HID - 25 -39 Watt 95 $13 fixture

Replacing higher wattage HID or High Pressure Sodium or Mercury Vapor

Interior replacements only

HID2 Ceramic HID - 70 Watt 155 $13 fixture HID3 Ceramic HID - 100 Watt 170 $15 fixture HID4 Pulse Start HID - 150 nominal Watts 72 $10 fixture HID5 Pulse Start HID - 350 nominal Watts 100 $13 fixture

HID6 Pulse Start HID - 1000 nominal Watts 400 $15 fixture

Interior LED Fixtures

LED1 ENERGY STAR Integral LED fixture Indoor Recessed Downlight Retrofit Module 38 $7 fixture Retrofit module of existing recessed fixture

LED2 ENERGY STAR Integral LED fixture Indoor Recessed Downlight 38 $7 fixture

New indoor recessed downlight fixture LED3 ENERGY STAR Integral LED fixture Indoor Portable LampTorchiere 30 $7 fixture

LED4 LED AccentTrack Lighting Fixtures 32 $6 head

LED5 LED Low-Bay Fixtures 150 $20 fixture For replacement of HID fixtures mounted le 15 above finished floor

LED6 LED Low-Bay Retrofit Kits 150 $20 fixture

LED8 LED Troffer Fixtures and Retrofit Kits 5 $10 fixture Troffers typically installed in lay-in ceilings 2x2 2x4 configuration

LED9 LED Surface and Suspended Linear Fixtures 25 $10 fixture Examples of LED surface-mounted luminaires include wrap vapor tight and strip fixtures (non-cooler)

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 14

-

Interior LED High Bay Fixtures

LED10A LED High-Bay Fixtures le 20000 LED lumens 150 $50 fixture

High bay fixtures must be installed at least 15ft above finished floor

LED10B LED High-Bay Fixtures gt 20000 LED lumens 225 $75 fixture

LED11A LED High-Bay Retrofit Kits le 20000 LED lumens 150 $50 fixture

LED11B LED High-Bay Retrofit Kits gt20000 LED lumens 225 $75 fixture

LED Parking Garage and Canopy Fixtures

LED12 LED Parking Garage and Canopy Fixtures and Retrofit Kits Outdoor lt= 5000 LED lumens 50 $15 fixture

Fixtures must be physically installed in a parking garage (area where vehicles are physically parked) or

fuel pump canopy Typically represents replacement of le175 W Metal

Halide or equivalent

LED13 LED Parking Garage and Canopy Fixtures and Retrofit Kits Outdoor 5001 - 10000 LED lumens 70 $30 fixture

Typically represents replacement of Metal Halide or equivalent greater than 175W and less than 400W

Product must be installed in a parking garage (area where vehicles are physically parked) or fuel pump

canopy

LED14 LED Parking Garage and Canopy Fixtures and Retrofit Kits Outdoor gt 10000 LED lumens 150 $50 fixture

Typically represents replacement of ge400 W Metal Halide or equivalent

Product must be physically installed in a parking garage (area where vehicles are physically parked) or

fuel pump canopy LED Screw in Lamps

ESLED1 ENERGY STAR Screw-in LED Bulb (Decorative Globe) 14 $5 lamp Lamp with globe shape such as type G

ESLED2 ENERGY STAR Screw-in LED Bulb (Decorative non-globe 14 $5 lamp Lamps with non-globe or candle-like shape such as type B C CA F

ESLED3 ENERGY STAR Screw-in LED Bulb and Low Voltage Mini-Reflector Bulbs (DirectionalReflector) 14 $5 lamp ANSI standard PAR and MR type lamps

ESLED4 ENERGY STAR Screw-in LED Bulb (Standard) 14 $5 lamp Lamp such as A series

ESLED5 ENERGY STAR Screw-in LED Bulb (Standard 3-Way) 14 $5 lamp Lamp such as A series with three light levels

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 15

- -LED Screw in Lamps Smart Bulbs

ESLED6 ENERGY STAR Screw-in LED Bulb (Decorative Globe Smart Bulb) 14 $5 lamp Lamp with globe shape such as type G

ESLED7 ENERGY STAR Screw-in LED Bulb (Decorative non-globe Smart Bulb) 14 $5 lamp Lamps with non-globe or candle-like shape such as

type B C CA F

ESLED8 ENERGY STAR Screw-in LED Bulb (DirectionalReflector Smart Bulb) 14 $5 lamp ANSI standard PAR lamps

ESLED9 ENERGY STAR Screw-in LED Bulb (Standard Smart Bulb) 14 $5 lamp Lamp such as A series

LED Tubes (replacing fluorescent)

TLED1 LED Replacement Lamps (Tubes) 2 5 $250 lamp Refer to Lighting Technical Specifications for requirements DLC Type A B and C are eligible bullType B linear (Interior driver) LEDs have the following installation requirements

bullExisting fluorescent ballast must be removed and fixturersquos incoming power wires are connected directly to the lamp sockets Strict adherence to installation instructions is critical when rewiring existing fixtures bullThe LED linear lamps must be delivered as part of a UL 1598C Classified Luminaire Retrofit Kit with instructions explaining the LED linear lamps must be installed on a luminaire that is already UL Listed bullThe retrofitted luminaire must be clearly identified using the label included with the Retrofit Kit indicating that the luminaire has been modified and can no longer operate the originally intended fluorescent lamp(s)

TLED2 LED Replacement Lamps (Tubes) 4 10 $4 lamp

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 16

LED Exterior Lighting

ELED1 ENERGY STAR Integral LED fixture Outdoor Recessed Downlight Retrofit Module 24 $10 module

ENERGY STAR or DLC Qualified fixtures ELED2 ENERGY STAR Integral LED fixture Outdoor Recessed

Downlight 24 $10 fixture

ELED3 LED Outdoor Flood Light Fixtures lt= 5000 LED lumens 50 $10 fixture Typically represents replacement of le175 W Metal Halide or equivalent Fixtures must be DLC qualified

ELED4 LED Outdoor Flood Light Fixtures gt 5000 LED lumens 70 $15 fixture Typically represents replacement of Metal Halide or equivalent greater than 175W Fixtures must be DLC qualified

ELED5 LED PoleArm Mounted Parking and Roadway Fixtures and Retrofit Kits lt= 5000 LED lumens 50 $25 fixture Typically represents replacement of le175 W Metal

Halide or equivalent Product must be DLC qualified

ELED6 LED PoleArm Mounted Parking and Roadway Fixtures and Retrofit Kits Outdoor gt 10000 LED lumens 150 $75 fixture

Typically represents replacement of Metal Halide or equivalent greater than 400W Product must be DLC

listed

ELED7 LED PoleArm Mounted Parking and Roadway Fixtures and Retrofit Kits Outdoor 5001 - 10000 LED lumens 70 $50 fixture

Typically represents replacement of Metal Halide or equivalent greater than 175W and less than 400W

Product must be DLC listed

ELED8 LED Wall Mount Fixtures and Retrofit Kits Outdoor lt= 5000 LED lumens 50 $25 fixture Typically represents replacement of le175 W Metal

Halide or equivalent Product must be DLC qualified

ELED9 LED Wall Mount Fixtures and Retrofit Kits Outdoor gt 5000 LED lumens 70 $50 fixture

Typically represents replacement of Metal Halide or equivalent greater than 175W Product must be DLC

qualified Permanent Fixture Removal

PFRA Indoor Permanent Fixture Removal combined with lighting retrofit na $010 watt removed Incentive only valid when units = ldquofixturerdquo in this table

Incentive is only offered when net lumens are reduced PFRB Outdoor Permanent Fixture Removal combined with lighting retrofit na $010 watt removed

Other LED Lighting LEDEXIT LED Exit Sign

na

$2 sign Replacing Incandescent or Fluorescent

SIGN1A Indoor LED Channel Signage $8 letter

Replacing Neon SIGN1B Outdoor LED Channel Signage $8 letter

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 17

Lighting Controls

CTL Unitary Sensor Controls

na

$1500 sensor

Passive infrared ultrasonic detectors are eligible Includes daylighting controls and all occupancy controls

Controls can be onoff stepped or continuous (dimming) Daylight sensor controls are required to be commissioned in order to ensure proper sensor calibration and energy savings

Minimum of 30 watts controlled per control

CLC Interior Central Lighting Controls $00175

square foot of area

under control

Automated central lighting control systems with override capabilities

This measure includes centrally-controlled time clocks wireless on off switches bi level switches computer based

controls pre-set scene selection dimmable ballasts and on-off dimmer switches for non-personal tuning

Floor plan must be submitted verifying square footage

DAYOCC Controls Combination - Daylighting and Occupancy Fixture Mounted $1500 sensor Minimum of 30 watts controlled per control

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 18

LED Traffic SignalsThis measure applies to the early replacement of existing incandescent traffic lights and pedestrian signals with LEDs New LED traffic signals must comply with ENERGY STAR requirements which can be found at httpswwwenergystargoviapartnersproduct_specseligibilitytraffic_eligpdf98bfshy1786

LED Traffic Signals Incentive Table

Round Traffic Signals 8 Red

Incentive per Signal

$15

8 Yellow 8 Green 12 Red

12 Yellow 12 Green

Turn Arrow Signals

8 Red

$13

8 Yellow 8 Green 12 Red

12 Yellow 12 Green

Pedestrian Signals

9 Pedestrian Only

$13

12 Hand Only 12 Pedestrian Only 12 Countdown Only

12 Pedestrian and Hand Overlay 16 Pedestrian and Hand Side by

Side 16 Pedestrian and Hand Overlay

16 Hand and Countdown Side-by-Side

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 19

Lighting Controls that Exceed Code Requirements

New Construction Lighting SpecificationsUnder the Lighting Power Density Approach the lighting power installed is compared with the lighting power allowed by code Incentives are available for systems where the installed lighting power is lower than the code-allowed power by at least 10 Savings are based on the Lighting Power Density (LPD) calculated on a watts per square foot basis Incentives will be paid only on the area of the building where the lighting installation is complete and is ready for occupancy If a portion of a building is not built-out such that the lighting in an area is not complete and ready for occupancy then that portion is not eligible for an incentive Baseline lighting power density is based on ASHRAE 901- 2007 Either the Space-by-Space or Building Area method may be used to calculate the LPD for the purposes of the incentive

Required Documentation bull Lighting Worksheet bull COMcheck Interior Lighting Report or equivalent analysis demonstrating space-byshy

space or building area calculations bull Reflected ceiling plans and electrical plan sheets showing lighting fixture layout bull Lighting fixture schedule sheet including fixture counts bull Fixture submittal or specification sheets showing model number and rated fixture wattage bull Architectural floor plans displaying floor area affected by proposed lighting installation

New Construction Lighting Incentives Table Lighting Wattssq ft

Improvement over of Code Incentive

gt= 10 and lt 20 $0035sq gt= 20 and lt 30 $007sq ft gt= 30 and lt 40 $0105sq

gt= 40 $021 sq ft

Incentives will be paid on a ($005kWh) custom basis Please contact Program Staff for eligibility of lighting controls for New Construction projects

Interior Occupancy Sensors Incentives are offered for occupancy-based controls in areas where they are not required by code Passive infrared ultrasonic detectors and fixture-integrated sensors or sensors with a combination sensor are eligible All sensors must be hard-wired and control interior lighting fixtures The incentive is per Watt controlled An inventory of the controlled fixtures and their wattage must be provided for each sensor with the Final Application

Daylight Dimming System Incentives are offered for daylight sensor controls in spaces with suitable available ambient light for at least part of the day Light may be through skylights clerestories windows or ldquolight tubesrdquo The controls can be onoff stepped or continuous dimming The onoff controller should turn off artificial lighting when the interior illuminance meets the desired indoor lighting level The stepped controller generally dims the artificial lighting 50 when the interior illuminance levels reach 50 of the desired lighting levels Continuous or dimming controllers dim artificial lighting proportionally to the available ambient light All types of daylight sensor controls are required to be commissioned in order to ensure proper sensor calibration and energy savings

Required Documentation bull Cut sheets or submittals of lighting control systems Reflected ceiling plans or schedule

showing which fixtures are controlled by lighting controls

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 20

New Construction Lighting Power Density CodeRequirements ndash Space by Space Method

Building Specific Space Types LPD (Wft2) Building Specific Space Types LPD (Wft2)

GymnasiumExercise Center AutomotivemdashServiceRepair 07

Playing Area 14 Manufacturing

Exercise Area 09 Low (lt25 ft Floor to Ceiling Height) 12

CourthousePolice StationPenitentiary High (gt25 ft Floor to Ceiling Height) 17

Courtroom 19 Detailed Manufacturing 21

Confinement Cells 09 Equipment Room 12

Judges Chambers 13 Control Room 05

Fire Stations HotelMotel Guest Rooms 11 Fire Station Engine Room 08 DormitorymdashLiving Quarters 11

Sleeping Quarters 03 Museum

Post Office-Sorting Area 12 General Exhibition 10 Convention Center-Exhibit Space 13 Restoration 17

Library BankOfficemdashBanking Activity Area 15 Card File and Cataloging 11 Religious Buildings

Stacks 17 Worship Pulpit Choir 24

Reading Area 12 Fellowship Hall 09

Hospital Retail

Emergency 27 Sales Area [For accent lighting see 93121(c)] 17

Recovery 08 Mall Concourse 17

Nurse Station 10 Sports Arena

ExamTreatment 15 Ring Sports Area 27

Pharmacy 12 Court Sports Area 23

Patient Room 07 Indoor Playing Field Area 14

Operating Room 22 Warehouse

Nursery 06 Fine Material Storage 14

Medical Supply 14 MediumBulky Material Storage 09

Physical Therapy 09 Parking GaragemdashGarage Area 02

Radiology 04 Transportation

LaundrymdashWashing 06 AirportmdashConcourse 06

AirTrainBusmdashBaggage Area 10

TerminalmdashTicket Counter 15

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 21

New Construction Lighting Power Density CodeRequirements ndash Building Area Method

Building Area Type 221 LPD (Wft2)

Automotive facility 09

Convention center 12

Courthouse 12

Dining bar loungeleisure 13

Dining cafeteriafast food 14

Dining family 16

Dormitory 1

Exercise center 1

Gymnasium 11

Health-care clinic 1

Hospital 12

Hotel 1

Library 13

Manufacturing facility 13

Motel 1

Motion picture theater 12

Building Area Type LPD (Wft2)

Multifamily 07

Museum 11

Office 1

Parking garage 03

Penitentiary 1

Performing arts theater 16

Policefire station 1

Post office 11

Religious building 13

Retail 15

Schooluniversity 12

Sports arena 11

Town hall 11

Transportation 1

Warehouse 08

Workshop 14

221 In cases where both a common space type and a building specific type are listed the building specific space type shall apply

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 22

Exterior New Construction LightingExterior New Construction savings over code lighting power density will be incentivized using custom lighting measure at $005kWh rate Participants must submit exterior lighting plans Submittals COMCHECK REPORT and lighting schedule for exterior lighting Savings are calculated from the LPD (Wsq ft) indicated below Additional information may be required based on the building exterior type and space description indicated below To contribute to incentive LEDs must satisfy program requirements for DLC Energy Star or equivalent listing

Required Documentation bull COMcheck Interior Lighting Report or equivalent analysis demonstrating space-by-space or

building area calculations bull Drawings showing lighting fixture layout bull Lighting fixture schedule sheet including fixture counts bull Fixture submittal or specification sheets showing model number and rated fixture wattage

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 23

Building Exterior Space Description LPD

Unco erect Pariki Ilg Area Parlurng ots arnd Drives 0 15 WfW

B i ing Grournds W al 1Yays lless Hlan 11] e 10 Wltirneru- 00

W a Nays 10 middot de or greater 112 W

Plaza a reas

Spec rest re areas

Stainh1ays 1ow 2

B i ing 8ntrames and Exits Ma efilbies m wr near foot of door width

Other doors 2o w 1r ear foot of door width

Ctmqpies and Overhimgs Free starndillg and a ched tmd 12s w m2 m bullerhangs

0 door sales Op en areas (ind udi Ilg ve id e sales 05 W lo )

street frontage far vehicle sales lots 21] W linear toot in addi middot on to open are-0bullmiddot lo~nce

B i ing facades 0 2 W tfl2 middot or eacil illumirnated N311 or surface

o r 5 0 Wllinear root fo r eac h m n inated N3l1 o r

surface length

Automated te lle r rnachmiddot es a lld 210 W per loca tion plus 91] night deposito liies W 1pernddiliorml A I middot per

1oca middot om

Eirltrances and gatehouse inspecliion 125 W ffl2 o middot uncovered slatiaBS a goo~ ed acir ies area

Load ing are-0s or law enforcement 0 5 W 2 of u rnco1bullered area fire ambu rnce and otiher emergency service ibullehmiddotctes

Drive-through w indOWs a taslrood 400 W per drive-Hlrough restaurants

Parking near 24 -h our retail 80111 W per main entry entmn ces

HVAC Equipment Air-Source Air Conditioners and Air-Source Heat Pumps New unitary air conditioning units or air source heat pumps that meet or exceed the qualifying cooling efficiency shown in the HVAC Incentives Worksheet are eligible for an incentive They can be either split systems or single package units The efficiency of split systems is based on an ARI reference number All packaged and split system cooling equipment must meet Air Conditioning and Refrigeration Institute (ARI) standards (210240 320 or 340360) be UL listed use a minimum ozone-depleting refrigerant (eg HCFC or HFC) All required efficiencies are based on the Consortium for Energy Efficiency (CEE) high-efficiency commercial air conditioning and heat pump specifications (wwwcee1org) A manufacturerrsquos specification sheet indicating the system efficiency must accompany the application Disposal of the existing unit

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 24

must comply with local codes and ordinances

Package Terminal Systems (Replacements) Package terminal air conditioners and packaged terminal heat pumps are through-the-wall self-contained units that are 2 tons (24000 Btuh) or less All EER values must be rated at 95degF outdoor dry-bulb temperature

Ductless Mini-Split Heat Pump lt54 Tons Incentives are offered for Ductless Mini-Split Heat Pump lt54 Tons with SEER rating greater than or equal to 120 and EER greater than or equal to 145 and HSPF greater than or equal to 90

Geothermal Heat Pump Geothermal equipment is a high-efficiency groundwater source water source or ground source heat pump system that meets or exceeds the energy efficiency requirements shown in the tables below These measures do not apply to heat pump systems coupled with non-heat pump systems such as chillers rooftop AC units boilers or cooling towers which must be filed as custom measures All HVAC applications other than comfort cooling and heating such as process cooling must also be applied for as custom measures

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 25

HVAC Heating Qualifying Incentive

Equipment Type and Cooling Capacity Cooling Qualifying Efficiency ($ per cooling Measure Code Efficiency

ton)

Air Cooled Air Conditioner

H01 lt 54 tons (lt 65000 Btuhr) 15 SEER NA $22

H02 lt 54 and lt 11 25 tons

125 IEER $22 (lt 65 000 Btuh and lt 135 000 Btuhr) NA

H03 lt11 25 and lt 20 tons

123 IEER NA $22 (lt 135000 Btuh and lt 240000 Btuhr)

H04 lt 20 and lt 6333 tons (~

11 1 IEER NA $22 240000 Btuh and lt 760000 Btuhr)

HOS ~ 6333 Ions (~ 760000 Btuhr) 103 IEER NA $22

Air Cooled Heat Pumps

H06 lt 54 tons (lt 65000 Btuhr) 143 SEER 87 HSPF $30

H07 lt 54 and lt 11 25 tons

123 IEER 3 3 COP $30 (lt 65000 Btuh and lt 135000 Btuhr)

HOS lt11 25 and lt 20 tons

1U IEER 3 2 COP $30 (lt 135000 Btuh and lt 240000 Btuhr)

H09 lt 2000 tons (240000 Btuhr) 105 IEER 3 2 COP $30

Packaged Terminal Systems (PTAC and PTHP) (PTHP only)

H10 lt 8000 Btuhr (lt066 tons) 11 8 EER 33 $17

H11 ~8000 and lt10500 Btuhr (~066 and lt 0875 tons) 11 4 EER 32 $17

H12 gt10500 Btuhr ( 875 tons) 107 EER 31 $17

H22 lt 54 tons (lt 65000 Btuhr) 121 EER 12 3 IEER NA $22

lt 54 and lt 11 25 tons 121 EER 12 3 IEER $22 H23

(lt 65000 Btuh and lt 135000 Btuhr) NA

H24 lt11 25 and lt 20 tons

120 EER 12 2 IEER $22 (lt 135000 Btuh and lt 240000 Btuhr) NA

H25 lt20 and lt 633 tons

119 EER 12 2 IEER $22 (lt 240000 Btuh and lt 760000 Btuhr) NA

H26 ~ 633 tons( lt760000 Btuhr) 110 EER 11 1 IEER NA

$22

HVAC Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 26

Other HVAC EquipmentHotel Guest Room Occupancy Sensor Incentives are offered for occupancy-based controls that control electric air conditioning air source heat pumps and or electric heating units for individual hotel rooms Systems with nonshyelectric heat are not eligible Sensors must be controlled by automatic occupancy detectors or a key-card system and the default setting for controlled units differ by at least 5 degrees (or shut the unit fan and heating or cooling off completely) from the operating set point during unshyoccupied periods The control system may also be tied into other electric loads such as lighting and plug loads to shut them off when occupancy is not sensed The incentive is per room Replacement or upgrades of existing occupancy-based controls are not eligible as a prescriptive incentive

Economizer Integrated Dual Enthalpy Economizer ControlsThis measure is targeted to non-residential establishments whose HVAC equipment is not equipped with a functional economizer

Circulation Fan High-Volume Low-SpeedFans must be greater than 16 feet in diameter and have variable speed control

ECM Circulation Fan This measure is targeted to non-residential customers whose air handling equipment currently uses a SP or PSC fan motor rather than an ECM This measure applies only to circulating fan motors of 1 HP or less Above 1 HP motors are governed by NEMA standards and would see little to no efficiency benefit by adding an ECM The targeted fan can supply heating or cooling only or both heating and cooling

ECM Circulation Pump This measure is targeted for replacement of a shaded pole or permanent split capacitor pump or motor with an electronically commutated pump or motor le75 HP

Retrocomissioning Cooling Systems Confined to chiller plant andor isolated packaged units For reservation must contain proposal with defined scope at equipment level that demonstrates energy savings For final approval required final commissioning report including raw data (TAB reports) demonstrating actual scope

This prescriptive measure can be used for facilities with maximum cooling demand less than 1687 tons Larger systems require the use of custom HVAC measure

Retrocomissioning Whole Building Covers all relevant major mechanical systems such as chiller plant air side systems compressed air andor process systems For reservation must contain proposal with defined scope at equipment level that demonstrates energy savings For final approval required final commissioning report including raw data (TAB reports) demonstrating actual scope

This prescriptive measure can be used for facilities less than 404858 square feet Larger facilities require the use of custom HVAC measure

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 27

Energy Management System For installing a web-based building automation system in existing buildings that currently have no digital automated HVAC controls or have outdated pneumatic control systems with inoperable time control functions Existing HVAC control systems must not have time-of-day scheduling Upgrading obsolete EMS HVAC system with inoperable time clock functions will be reviewed on a case-by-case basis for incentive eligibility This incentive cannot be combined with incentives for programmable thermostats or setback-setup controls Must include the controls strategy and a scaled floor-plan with controlled areas highlighted HVAC BAS systems must be new and include bull Central time clock control bull Web-based interface with PC-based controls and graphic bull Building performance Tracking bull Open-protocol architecture controls system shall consist of either LonTalk (ANSICEA 7091) or BACNet (ASHRAE ANSI 135) protocol being used between all controlled and controlling devices and every node on the network bull Minimum setback period must exceed 2200 hours per year bull A minimum setback space temperature of at least 10degF when heating and 5degF when cooling bull Ability to adjust schedules and settings remotely over the internet bull Report generation describing energy and operating trends

This prescriptive measure can be used for facilities with maximum cooling demand less than 456 tons Larger systems require the use of custom HVAC measure

Demand Controlled Ventilation New ventilation controls must use carbon dioxide levels to measure occupancy and modify the percentage of outside air based on occupancy levels Only buildings with space heating and cooling requirements are eligible Conditioned spaces must be kept between 65ordmF and 75ordmF during occupied operating hours Carbon dioxide sensors must be installed in conjunction with fully functioning motor operated outside air dampers Dual temperature air-side economizers with zone-level CO2 sensors for rooftop units are eligible

This prescriptive measure can be used for facilities with maximum cooling demand less than 2210 tons Larger systems require the use of custom HVAC measure

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 28

Other HVAC Measures- consult project manual for eligibility specifications HVAC

Measure Incentive Unit Quantity Incentive

Measure Code er Unit

H1 8 Hotel Guest Room Occupancy Sensor Room $20

H1 9 Economizer Integrated Dual Enthalpy Economizer Controls Ton $1 5

H20 Circulation Fan High-Volume Low-Speed Unit $30

H21 ECM Circulation Fan Fan $1 5

H27 ECM Circulation Pump Pump $50

H28 Retrocommissioning Cooling Systems

Ton $750

H29 Retrocommissioning Whole Buidling

Square Foot $010

H29 Energy Management System Ton $2500

H30 Demand Controlled Ventilation Ton $2500

Other HVAC Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 29

Unitary HVAC Chillers

Air-Cooled Chillers Water Cooled Positive Displacement Reciprocating Chillers and Water Cooled Centrifugal Chillers Chiller applications including existing multiple chiller configurations (including redundant or lsquostand-byrsquo chillers) existing chillers serving multiple load groups and chillers in industrial applications are defined as non-standard applications and must follow a site-specific custom protocol $005kWh) rate

Incentives are offered for chillers with an IPLV value (expressed in kW per ton) that is less than or equal to the qualifying efficiency shown in the table below The chiller efficiency rating must be based on ARI Standard 550590-2003 for IPLV conditions The chillers must meet ARI standards 550590-2003 be UL listed and use a minimum ozone-depleting refrigerant (eg HCFC or HFC) The ARI net capacity value should be used to determine the chiller tons A manufacturerrsquos specification sheet with the rated kWton-IPLV or COP-IPLV must accompany the application along with the four point performance data that is the basis for the IPLV The application must include a certification that the chiller is appropriately sized for site design load conditions

Chillers must satisfy efficiency requirements for both full load and IPLV efficiencies for either Path A or Path B The table shows the minimum efficiency ratings to qualify for the prescriptive incentive which must be consistent with the expected operating conditions of the efficient chiller For example if the efficient chiller satisfies Path A and generally performs at part load the appropriate baseline chiller efficiency is the IPLV value under Path A If the efficient chiller satisfies Path B and generally performs at full load the appropriate baseline chiller efficiency is the full load value under Path B Generally chillers operating above 70 percent load for a majority (50 or more) of operating hours should use Path A and chillers below 70 load for the majority of operating hours should use Path B

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 30

C3 lt 75 tons

C4 75 tons and lt 150 tons

cs ~ 150 tons and lt 300 tons C6 ~ 300 tons

Water Cooled Centrifugal Chillers C7 lt 300 tons CB ~ 300 tons and lt 600 tons

C9 ~ 600 tons

Path A

Qualifying Full Load Efficiency

Qualifying IPLV Efficiency

Path B

Qualifying Full Load Efficiency

Qualifying IPLV Efficiency

0780 kWton 0567 kWton 0800 kWton 0540 kWton

0775 kWton 0554 kWton 0790 kWton 0527 kWton

0680 kWton 0522 kWton 0718 kWton 0486 kWton 0620 kWton 0486 kWton 0639 kWton 0441 kWton

0634 kWton 0536 kWton 0639 kWton 0405 kWton 0576 kWton 0494 kWton 0600 kWton 0360 kWton

0570 kWton 0494 kWton 0590 kWton 0360 kWton

I

Incentive ($ton)

$17

$17

Unitary Chiller Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 31

Refrigeration

Anti-Sweat Heater Controls Incentives are offered for devices that sense the relative humidity in the air outside of the display case and cycles or turns off the glass door (if applicable) and frame anti-sweat heaters when the ambient dew point is below a preset set point Technologies that can turn off anti-sweat heaters based on sensing condensation (on the inner glass pane) also qualify Incentive is based on the number of doors

Evaporator Fan Controls This measure is for the installation of controls in medium temperature walk-in coolers The controller reduces airflow of the evaporator fans when there is no refrigerant flow The measure must control a minimum of 120 HP where fans operate continuously at full speed The measure also must reduce fan motor power by at least 75 during the off cycle This measure is not applicable if any of the following conditions apply 1) Compressor runs all the time with high duty cycle 2) Evaporator fan does not run at full speed all the time 3) Evaporator fan motor runs on poly-phase power 4) Evaporator fan motor is not shaded-pole or permanent split capacitor (PSC) 5) Evaporator fan does not use off-cycle or time-off defrost

Floating Head Pressure Controls Controls must vary head pressure to adjust condensing temperatures in relation to outdoor air temperature Must replace existing constant pressure or manually controlled systems to achieve reduced head pressure in order to maintain a minimum saturated condensing temperature of 70 degF or a 20 degF variance below design heat pressure during mild weather conditions Compressor size must be at least 5 HP

Automatic Door Closers for Walk-In Coolers and Freezers The auto-closer should be applied to the main insulated opaque door(s) of a walk-in cooler or freezer The auto-closer must be able to firmly close that door when it is within one inch of full closure This must be a newly installed automatic door closer replacements on previously installed door closers are not eligible for an incentive

EC Motor for Walk-inReach-in Refrigerated cases or Freezer cases Incentives are offered for replacement of an existing standard-efficiency shaded-pole or permanent split capacitor evaporator fan motor in refrigerated display cases or fan coil in walk-ins The replacement unit must be an Electronically Commutated Motor (ECM) This measure cannot be used in conjunction with the Evaporator Fan Controller measure

ENERGY STAR Solid Door Freezer and Glass Door Freezer and Refrigerators Incentives are offered for replacement of existing self-contained refrigerators and freezers with units that are ENERGY STARreg listed Only units with built-in refrigeration systems are qualified Units with remote refrigeration systems or units do not qualify Customers must provide proof that the appliance meets the CEE or ENERGY STAR efficiency specifications using ASHRAE Standard 72-2005 (38degF plusmn 2degF) Incentive is per unit

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 32

Refrigeration Suction Pipe Insulation 1 Must insulate bare refrigeration suction lines of 1 58 inches in diameter or less on existing equipment only 2 Cooler lines require frac34 inch of flexible closed-cell nitrite rubber or an equivalent insulation 3 Freezer lines require 1-inch of flexible closed-cell nitrite rubber or an equivalent insulation 4 Insulation exposed to the outdoors must be protected from the weather (ie jacketed with a medium-gauge aluminum jacket)

Night Cover 1 Must install a cover on an existing open refrigerated display case to decrease its cooling load during off hours 2 The equipment manufacturer must not object to the use of night covers for the existing display case model 3 This rebate is based on the linear footage of the installed 4 The cover must be applied for a period of at least six hours

Strip Curtain on Walk-In CoolerFreezer 1 New strip curtains or plastic swinging doors must be installed on doorways of refrigerated spaces (conditioned to less than 50deg F) 2 Rebate is based on the linear footage of the doorway that the strip curtains are being installed in 3 Opening between the strip curtain and bottom of doorway must be no larger than 1 inch 4 Strips must have an overlay greater than 1 inch

Evaporator Coil Defrost Control 1The current system must include an operating electric defrost system with a functional electroshymechanical time clock 2 Evaporator coil temperature and pressure must be monitored by controller in order to determine optimal defrost cycles 3 New intelligent control systems to control the defrost systems will typically replace timed- defrost controls

Variable Speed Refrigeration Compressor This measure VSD control for refrigeration systems and its eligibility targets applies to retrofit construction in the commercial and industrial building sectors it is most applicable to grocery stores or food processing applications with refrigeration systems This protocol is for a VSD control system replacing a slide valve control system

Add Doors to Open Refrigerated Cases The eligible retrofit equipment is either no sweat doors or doors with anti-sweat heaters If a lighting retrofit is included with the new doors it must consume the same amount of energy or less energy than the old lighting Upgrades to lighting or other system components should be processed separately Horizontal cases are not eligible and should be processed as custom

Door Gaskets PECO Smart Ideas For Your Business CampI Program Application Manual

Q1 2017 pg 33

This measure is applicable to commercial refrigeration and applies to the replacement of worn-out gaskets with new better-fitting gaskets Applicable gaskets include those located on the doors of walk-in andor reach-in coolers and freezers This protocol applies to the main doors of both low temperature (ldquofreezerrdquo ndash below 32 degF) and medium temperature (ldquocoolerrdquo ndash above 32 degF) walk-ins

Zero Energy Doors For this measure a no-heatlow-heat clear glass door must be installed on an upright display case It is limited to door heights of 57 inches or more Doors must have either heat reflective treated glass be gas filled or both This measure applies to low temperature cases onlymdashthose with a case temperature below 0degF Doors must have 3 or more panes Total door rail glass and frame heater amperage ( 120 volt) cannot exceed 039413 amps per door for low temperature display cases Rebate is based on the door width (not including case frame)

Air Cooled Refrigeration Condenser Approach temperature lt8F for low temperature loads lt13F for medium temperature loads

Oversized Condenser with VFD New standalone condenser must no more than 150 larger than load

Case Light Occupancy Controls Acceptable for freezer or refrigerated cases as well as open cases or cases with doors

LED Open Case Lighting For replacing open case T8 or T12 fluorescent fixtures with DLC listed LEDs on refrigerators coolers and freezers

LED Enclosed Case Lighting Refrigerated LED case lighting with or without motion sensors on enclosed refrigerated vertical displays The baseline equipment is assumed to be cases with uncontrolled T8 or T12 linear fluorescent lamps

LED Enclosed Case Lighting Freezer LED case lighting with or without motion sensors on enclosed freezer vertical displays The baseline equipment is assumed to be cases with uncontrolled T8 or T12 linear fluorescent lamps

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 34

Refrigeration Measures Ref Measure

Measure Incentive Unit IncentiveUnit Code R01 Anti-Sweat Heater Controls Door $30

R02 Evaporator Fan Controls Controller $50

R03 Floating-head Pressure Controls HP $20

R04 Automatic Door Closers fo r Walk-in Coolers Door $75

R05 Automatic Door Closers fo r Walk-in Freezers Door $75

R06 Evaporator Fan EC Motor fo r Reach- in Cases Motor $35

RO Evaporator Fan EC Motor fo r Walk-in Cases Motor $50

R08 ENERGY STARreg Glass Door Freezer lt15 Cu Ft Unit $100

R09 ENERGY STARreg Glass Door Freezer 15- 49 Cu Ft Unit $125

R10 ENERGY STARreg Glass Door Freezer ~ 50 Cu Ft Unit $145

R11 ENERGY STARreg Solid Door Freezer Unit $75

R12 ENERGY STARreg Glass Door Refrigerator lt50 Cu Ft Unit $30

R13 ENERGY STARreg Glass Door Refrigerator gt= 50 Cu Ft Unit $50

K14 t NtKGY ~ I AKreg ~Olld Uoor Ketngerator $ OU Cu t-t Unit $~0

R15 Suction Pipe Insulation Walk-in Coolers Linear Foot $050

R16 Suction Pipe Insulation Walk in Freezers Linear Foot $075

R17 Night Cover Linear Foot $800

R18 Strip Curtains on Walk-in Cooler Linear Foot $250

R19 Evaporator Coil Defrost Control Controller $7500

R20 Variable Speed Refrigeration Compressor Compressor $85

R21 Add Doors to Open Refrigerated Cases Door $55

R22 Door Gaskets Door $250

R23 Zero Energy Doors Door $50

R24 A ir Cooled Refrigeration Condenser Ton $10

R25 Oversized Condenser with VFD Ton $10

R26 Case Light Occupancy Controls Door $8

R27 LED Open Cose Lighting Cose $10

R28 LED Enclosed Case Lighting Refrigerated Door $30

R30 LED Enclosed Case Lighting Freezer Door $30

Refrigeration Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 35

Food Service Beverage and Snack Machine Controls Incentives are offered for refrigerated vending machines that contain non-perishable bottled and canned beverages Controller for both types of systems must include a passive infrared occupancy sensor to turn off fluorescent lights and other energized machine systems when the surrounding area is unoccupied for 15 minutes or longer For the refrigerated machines the control logic may include periodic power up at 2-hour intervals or longer to maintain product temperature and provide compressor protection

ENERGY STARreg Refrigerated Beverage Vending Machines Incentives are offered for ENERGY STARreg beverage vending machines Qualifying machines can be found at httpswwwenergystargovproductsothervending_machines

ENERGY STARreg Electric Steam Cooker This measure applies to the installation of electric ENERGY STAR steam cookers as either a new item or replacement for an existing unit Gas steam cookers are not eligible The steam cookers must meet minimum ENERGY STAR efficiency requirements A qualifying steam cooker must meet a minimum cooking efficiency of 50 percent and meet idle energy rates specified by pan capacity

ENERGY STARreg Electric Combination Oven This measure applies to electric ovens capable of handling single 12 x 20 x 25 pan per rack

ENERGY STARreg Commercial Convection Oven The oven must meet or exceed heavy load potato cooking energy efficiency of greater than 70 utilizing ASTM Standard F149 Applies only to electric ovens

ENERGY STARreg Commercial Fryers The commercial fryer must have a tested heavy load (French fry for large vats) cooking energy efficiency of greater than 80 utilizing American Society for Testing and Materials (ASTM) Standard F1361 for commercial fryers and ASTM Standard F2144 for large vat fryers Multiple vat configurations are paid per qualifying vat ENERGY STAR maintains a list of qualifying products and specifications at httpwwwenergystargov

ENERGY STARreg Commercial Hot Holding Cabinet Energy STAR rating electric

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 36

Food Service amp Other Measures FoodOther

Measure Incentive Unit Incentive

Measure Code Unit

F01 Beverage Machine Controls Unit $25

F02 Snack Machine Controls Unit $20

F03 ENERGY STARreg Refrigerated Beverage Vending Machir Unit $125

F04 ENERGY STARreg Commerc ial Steam Cooker Unit $200

F05 ENERGY STARreg Electric Combination Oven Unit $200

F06 ENERGY STARreg Commercial Electric Convection Oven Unit $150

F07 ENERGY STARreg Commerc ial Fryers Unit $100

F08 ENERGY STARregCommerc ial Hot Holding Cabinet Unit $200

Food Service Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 37

Motors and Variable Frequency DrivesEarly Replacement Motors For constant speed and uniformly loaded motors this measure applies to the replacement of old motors with new energy efficient motors of the same rated horsepower Old motors must be less than 15 years Replacements where the old motor and new motor have different horsepower ratings are considered custom measures Motors with variable speeds variable loading or industrial-specific applications are also considered custom measures

Motors Incentive Table Motors

Measure Code

HP Incentive per Motor

M01 15 - 10 $40 M02 11 - 50 $100 M03 51-100 $150 M04 gt100 $300

Only VFDs on unitary systems are eligible Non-unitary systems must be submitted as a custom measure Soft start motors are not eligible

Variable Frequency Drives on HVAC Fan Applications Incentives are offered for installing VFDs on existing HVAC fans that do not have pre-existing VFDs This measure applies to HVAC supply and return fans only All other fans including cooling tower fans must be submitted as custom measures Manually fixed speed settings on HVAC fans must be submitted via custom application The VFD must control motor speed automatically in response to pressure flow temperature or other variable signal The installation of a VSD must accompany the permanent removal or disabling of any throttling devices such as inlet vanes bypass dampers and throttling valves etc The incentive is offered per controlled HP

Variable Frequency Drives on Pump Applications Incentives are offered for installing VFDs on existing chilled water pumps and heating hot water pumps that do not have existing VFDs This measure applies to chilled water pumps and heating hot water pumps only All other pumps must be submitted as custom measures Manually fixed speed settings on pumps must be submitted via custom application The VFD must control motor speed automatically in response to pressure flow temperature or other variable signal The installation of a VSD must accompany the permanent removal or disabling of any throttling devices such as throttling valves The incentive is offered per controlled HP

Variable Speed Control for Kitchen Exhaust Hoods The measure consists of installing a new VSD in conjunction with a sensor control system that varies the exhaust rate of kitchen ventilation (exhaust andor makeup air fans) based on the heat and effluent output from the cooking appliances (ie the more heat and smokevapors generated the more ventilation needed) This involves installing a temperature sensor in the hood exhaust collar andor an optic sensor on the end of the hood that senses cooking conditions and allows the system to automatically vary the rate of exhaust to match requirements by adjusting the fan speed accordingly

Variable Speed Drives for Process or Other Equipment VFD must be used in conjunction with a process (non HVAC) application To qualify for this incentive the driven equipment must operate at least 2000 hours per year Redundant or back- up units do not qualify VFDs replacing existing VFDs do not qualify The VFD must control motor

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 38

speed automatically in response to pressure flow temperature or other variable signal VFDs installed as ldquosoft startrdquo without automatic manual closed loop speed control do not qualify The installation of a VFD must accompany the permanent removal or disabling of any throttling devices such as throttling valves The incentive is per controlled HP and only applies to controlled motors less than 50 HP

VSDVFD Incentives Table VFD

Measure Code

Measure Unit Incentive per Unit

Fan Application

V01 VFD on HVAC Fan HP $25 Pump Application

Variable Speed Control for Kitchen Exhaust Hoods

Variable Speed Drives for Process or Other Equipment

V02 VFD on Chilled Water Pumps HP $25 V03 VFD on Heating Hot Water Pumps HP $25

V04 Kitchen Exhaust Fan Retrofit Hood HP $500

V05 Process Motor lt 50 HP HP $50

Domestic Hot Water Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater This measure documents the energy savings attributed to converting from a standard electric water heater to an ENERGY STAR natural gaspropane-fired water heater or a standard oil-fired water heater with an Energy Factor of 0585

Heat Pump Water Heater This includes heat pump water heaters with energy factors meeting ENERGY STAR criteria The measure described here involves a direct retrofit of a resistive electric water heater with a heat pump water heater It does not cover systems where the heat pump is a pre-heater or is combined with other water heating sources More complicated installations can be treated as custom projects

Low Flow Pre-Rinse Spray Valve This measure applies to efficient low flow pre-rinse sprayers in grocery and food service applications The most likely areas of application are kitchens in restaurants and hotels Only premises with electric water heating may qualify for this incentive In addition the replacement pre-rinse spray nozzle must use less than 16 gallons per minute with a cleanability performance of 26 seconds per plate or less Low flow pre-rinse sprayers reduce hot water usage and save energy associated with water heating

Domestic Hot Water Incentive Table

Measure Code Measure Unit Retrofit Incentive per

Unit

W01 Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater Unit $100

W02 Heat Pump Water Heater Unit $100 W03 Low-Flow Pre-Rinse Spray Valve Valve $17

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 39

Compressed Air SystemsNo-loss Condensate Drain No-loss Condensate Drains are controlled by a sensor that monitors the level of condensate and only open when there is a need to drain condensate They close before compressed air is allowed to escape This measure is targeted to non-residential customers whose equipment is a timed drain that operates on a pre-set schedule Acceptable baseline conditions are compressed air systems with standard condensate drains operated by a solenoid and timer

Air-Entraining air nozzle This measure is targeted to non-residential customers whose compressed air equipment uses stationary air nozzles in a production application with an open copper tube of 18rdquo or 14rdquo orifice diameter Energy efficient conditions require replacement of an inefficient non-air entraining air nozzle with an energy efficient air-entraining air nozzle that use less than 15 CFM at 100 psi for industrial applications

Storage Tanks for LoadNo Load Screw Compressors This measure protocol applies to the installation of air receivers with pressureflow controls to loadno load compressors Loadno load compressors unload when there is low demand The process of unloading is done over a period of time to avoid foaming of the lubrication oil Using a storage tank with pressureflow control will buffer the air demands on the compressor Reducing the number of cycles in turn reduces the number of transition times from load to no load and saves energy The baseline equipment is a loadno load compressor with a 1 galcfm storage ratio or a modulating compressor with blowdown The high efficiency equipment is a loadno load compressor with a minimum storage ratio of 4 gallons of storage per cfm

Cycling Refrigerated Thermal Mass Dryer When air is compressed water vapor in the air condenses and collects in liquid form Some of this condensate collects in the air distribution system and can contaminate downstream components such as air tools with rust oil and pipe debris Refrigerated air dryers remove the water vapor by cooling the air to its dew point and separating the condensate Changes in production and seasonal variations in ambient air temperature lead to partial loading conditions on the dryer Standard air dryers use a hot gas bypass system that is inefficient at partial loads A Cycling Thermal Mass Dryer uses a thermal storage medium to store cooling capacity when the system is operated at partial loads allowing the dryer refrigerant compressor to cycle

This measure is targeted to non-residential customers whose equipment is a non-cycling refrigerated air dryer with a capacity of 600 cfm or below Acceptable baseline conditions are a non-cycling (eg continuous) air dryer with a capacity of 600 cfm or below The replacement of desiccant deliquescent heat-of-compression membrane or other types of dryers does not qualify under this measure

Variable Speed Air Compressor This type of compressor uses a special drive to control the speed (RPM) of the unit which in turn saves energy compared to a fixed speed equivalent

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 40

No-loss Condensate Drain Air-Entraining Air Nozzle Cycling Refrigerated Thermal Mass Dryer

Compressor Incentive per

Equipment Type Units Quantity Daily Operating Unit

Hours

CA04 Storage Tanks for LoadNo Load Screw

Compressor HP $10 Compressors

CA05 Variable Speed Air Compressor

Compressor HP $30

CA06 Compressed Air System Optimization

Compressor HP $50

Compressed Air System Optimization The submitted optimization measures must be identified in an Air System Audit or equivalent study to be eligible The measures must demonstrate energy savings as evaluated by a Program Engineer Additionally measures must also fall under one or more of the category below to be eligible

1) Install storage Receivers (new receivers only replacing existing storage receivers are ineligible)

2) Compressor control (must demonstrate improvement in partial load efficiency of the compress air system including reduceeliminate partially loaded units)

3) Dryer control 4) Source pressure reduction 5) Right-sizing distribution components such as piping filters regulators

connectors and hoses (routine maintenance replacements are ineligible) 6) Leakage detection and repair 7) Eliminate low-efficiency end-usages of compressed air 8) Heat recovery (most reduce electricity consumption of the replaced heat source)

Compressed Air Systems Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 41

lt65000 Btuh

~ 65000 Btuh and lt135000 Btuh

135000 Btuhand lt240000 Btuh

240000 Btuh and lt760000 Btuh

760000 Btuh

154

142

135

125

123

Chiller Capacity Path APath B efficiency (kWton )

lt 150 tons

~150 tons and lt300 tons

300 tons and lt400 tons

400 tons and lt600 tons

600 tons

lt75 tons

~75 tons and lt150 tons

~150 tons and lt300 tons

~300 tons and lt600 tons

600 tons

0610 FU0695 FL and 0550 IPLV0440 IPLV

0610 FU0635 FL and 0550 IPLV0400 IPLV

0560 FU0595 FL and 0520 IPLV0390 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

Path APath B efficiency (kWton )

0750 FU0780 FL and 0600 IPLV0500 IPLV

0720 FU0750 FL and 0560 IPLV0490 IPLV

0660 FU0680 FL and 0540 IPLV0440 IPLV

0610 FU0625 FL and 0520 IPLV0410 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

Data Centers Data Center incentives are available for facilities ranging in size from office server closets to large standalone facilities

Air Cooled Chiller Path APath B EER (BtuWh) lt150 tons 101 FL97 FL and 137 IPLV158 IPLV ge150 tons 101 FL97 FL and 140 IPLV161 IPLV

Air Cooled Chiller without Condenser Air-cooled chillers without condenser must be rated with matching condensers and comply with air-cooled chiller efficiency requirements

Computer Room Air Conditioner

Computer Room Air Handler Variable Speed Replacing constant speed CRAH with VSD CRAH

Water Cooled Centrifugal Chiller

Water Cooled Positive Displacement or Reciprocating Chiller

Uninterruptible Power Supply Must be Energy Star Certified UPS or have full load efficiency rating

ge948 for 20-100 kVA ge978for ge100 kVA

Mainframe Refresh The rated efficiency of the replacement Mainframes power supply must be at least 8 more

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 42

- Equipment Type Units IncentiveUnit

D1 Air Cooled Chiller Ton $4000 D2 Air Cooled Chiller W ithout Condenser Ton $2000 D3 Computer Room Air Conditioner Ton $3000 D4 Computer Room Air Handler Variable Speed Ton $1000 D5 Water Cooled Centrifugal Chiller Ton $3000 D6 Water Cooled Positive Displacement or Reciprocatin $3000 D7 Uninterruptible Power Supply 20-100 kVA $1000 D8 Uninterruptible Power Supply gt 100 kVA $1000 D9 Mainframe Refresh $2000

D10 Server Refresh $2000 D11 PC Power Managment System $600 D12 HVAC System Optimization $005 D1 3 HoUCold Aisle Containment kWh saved $005 D14 Server Virtualization kW reduction $40000 D1 5 Thin Clients Units $500

efficient compared to the existing Mainframes power supply The replacement Mainframe if Inactive must be decommissioned and removed from the Data Center

Server Refresh Replacement servers must be ENERGY STARreg certified Replacement servers power supply must be 5 more efficiency compared to the power supply of the replaced servers The replaced server must be decommissioned and removed from the data center

HVAC System Optimization Final system must have these features

-Implementation of free cooling by the addition of an economizer system -Conversion of constant speed CRACCRAH into variable speed operations using VFDs and additional control functionalities and -Elevation of exhaust air temperature

HotCold Aisle Containment Includes both Hot and Cold Aisles Installing new containment measures not replacing already existed aisle containment Plenum-only installations not eligible Must result in higher difference between the return air (hot aisle) and supply air (cold aisle) temperatures measured at rack intake and exhaust locations

Server Virtualization Minimum of consolidating 5 Servers virtualized into one Server The virtualized servers if inactive are removed from the Data Center

Thin Clients Must be ENERGY STAR certified thin clients Decommissioned clients are removed from the Data Center

Data Center Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 43

Whole Building Systems Whole Building Systems Approach

The Whole Building Systems approach is intended to encourage integrated energy efficient designs by providing enhanced incentives to the customer who addresses overall energy performance Owners of eligible and qualifying new construction and major renovation projects can receive Whole Building Systems incentives when energy modeling indicates the projectrsquos performance is over 10 better than the ASHRAE 901-2007 Savings from eligible electric end-uses in kilowatt hours define the amount of financial incentive Energy savings achieved through renewable energy sources are not counted toward project energy savings and are not included in the savings basis Incentive reservations obtained during the design phase of a project will be honored for up to 24 months

How to Apply for Whole Building Systems Incentives Before construction begins bull A Pre-notification Application must be submitted documenting the Owners intention to

seek Whole Building Systems incentives bull The Owner must confirm the goals and energy efficiency strategies being pursued by the

design team on the completed Pre-notification Worksheet (Checklist tab) and in the project Summary (Whole Building Performance Summary tab)

bull Submit executable building modeling software files bull Submit the Whole Building Performance Summary worksheet energy simulation model

inputs and outputs and supporting documentation bull Receive confirmation and eligibility notification from the PECO Smart Ideas team and

receive an incentive reservation bull The final incentive paid may differ from the reserved incentive amount The final

incentive will be calculated based on site-verified equipment installation and performance The Owners final application and complete documentation must be received within 6 months of equipment installation or certificate of occupancy whichever is later

bull An executable energy model and model output demonstrating compliance with the criteria of ASHRAE 901-2007 Appendix G will be required and the equipment data sheets LED lighting fixtures must be on the DLC or Energy STAR qualified products list (QPL) to be eligible LED fixtures not on the DLC or Energy STAR QPL has the option of submitting LM79 and LM80 test reports for evaluation against DLC and Energy STAR eligibility criteria

During the construction period bull Owner and design team continue to work closely with their chosen contractor to assure

energy efficiency measures are included and installed in the completed building

When the building is constructed and operational bull Complete the Owner final application Request an equipment verification site visit by the

PECO Smart Ideas team Equipment must be installed and fully operational o Program staff will schedule a site visit and utilize submitted documentation and

measurement tools to verify that the installation follows the submitted energy simulation model

bull When PECO confirms that there are no significant changes to the installed equipment payment of the reserved incentive will be made to the Owner within 6 weeks

bull If changes from the proposed design energy simulation are found the Owner and design team will be notified of the reduced incentive amount a period of 20 calendar days will

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 44

Improvement Incentive per Sq Ft

over Code

~11 to lt20 $0155

~20 to lt30 $0233

~30 to lt40 $0350

~40 to lt60 $0525

~60 $0700

be allowed for supplemental information to be provided if no additional information is received by PECO Smart Ideas team the reduced incentive payments will be made and sent to the Owner if additional clarification and information is available program staff will work diligently to resolve the discrepancies and arrive at a reasonable incentive adjustment with the customer

Payments made by PECO Smart Ideas are final

Customer Eligibility The Owner of the proposed new building project must be a customer of PECO and receive delivery of electric service from PECO to receive kilowatt-hour based incentives Please note that electricity supply can be provided by any vendor

Project Eligibility bull The project must be a new construction or major renovation Major renovations involving

the removal and redesign of at least two building systems (such as interior lighting and mechanical systems) may apply for Whole Building Systems incentives

bull To qualify for incentives projects must demonstrate energy efficiency enhancements that achieve at least 11 improvement in the proposed design versus the standard baseline

bull The Owner must submit a Pre-approval Application to the program at the stage where changes for increased energy efficiency are still feasible and construction has not been completed

bull Projects receiving Whole Building Systems incentives are not eligible to receive other incentives such as the prescriptive or custom program incentives for the same scope

bull Project components that are NOT eligible for consideration as a basis for PECO Smart Ideas include the following o Alternative fuel sources (eg use of gas or oil equipment in lieu of electric) Please note

that combined heat and power (CHP) systems will be incentivized for the electricity they produce

o Renewable energy sources (eg solar wind biomass) bull Ineligible savings include exterior lighting process receptacle miscellaneous loads and

other unregulated end-uses Custom incentives are available for new construction exterior lighting

Whole Building Systems Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 45

Custom Project Specifications Instructions for Energy Savings Calculations for Custom Projects Custom projects must involve measures that result in a reduction in electric energy use (kWh) Electricity savings may result from either efficiency improvements or fuel switching Custom Incentives are based on the first year kilowatt-hour savings Custom applications must be accompanied by detailed engineering calculations that document the annual total energy savings

The following serve as guidelines for the minimum required documentation

Equipment Information Submittals bull A list of the present and proposed equipment and components to be installed

including manufacturerrsquos catalogmodel number bull Manufacturerrsquos specification sheets showing capacities and performance for all major

components

Energy Savings Calculations Provide calculations documenting the predicted energy consumption of the existing (or baseline) and proposed system using appropriate analytical tools and clearly stated assumptions Calculations may be performed by ldquohandrdquo but spreadsheet analysis or more rigorous modeling is preferred All analysis should be provided in electronic format All assumptions such as operating hours existing and proposed equipment operational details must be presented Engineering algorithms and procedures from recognized technical organizations such as ASHRAE SMACNA ANSI etc must be used Use rated performance factors tested under accepted procedures specified by recognized rating agencies such as AHRI ANSI ASTM etc Provide an explanation when equipment performance rating conditions vary from standard conditions

In support of the calculations extensive documentation must be provided that provides the basis for the savings estimates The documentation must provide information on the equipment operating schedule daily and seasonal load profile and baseline AND energy efficient equipment performance at the operating loads Typical documentation for custom projects often includes bull Engineering or architectural drawings and ldquoequipment schedulerdquo sheets bull Component specification sheets that include part load efficiency or performance

factors bull Spreadsheet calculations or inputoutput files and results from system modeling or

other engineering analysis using accepted engineering algorithms and practices bull Log sheets trend logs from a building management system or other operating

documentation that are often necessary to document operating hours and equipment loading and used as a basis for the calculations (in some cases short term monitoring may be required to document the load profile)

bull Control sequence of operations that are necessary where controls play a part in the savings equation

Additional documentation other than that described in the application may be required for program participation Larger projects may also require pre- and post-project sub metering or monitoring of loads andor power input as part of another measurement and verification activity to demonstrate the actual energy savings that are realized

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 46

Baseline for Custom Analysis Where equipment is replaced prior to the end of its rated service life in order to achieve energy savings the existing equipment performance may be used as the baseline in the energy savings calculations Where equipment is replaced due to failure or for other reasons (such as obsolescence or a need for more capacity) the baseline performance used in the savings calculation should be either the minimum performance that would be required by code for that equipment type and application (where a code applies) or the performance of the equipment that would have been selected as the customers standard practice when a code does not apply

Baseline or Existing System Summary On custom worksheet on application form include make model number name plate information (such as operating voltage and rated full load amps) rated capacity quantities equipment condition and age facility operating hours equipment operating schedule and load curves If needed attach separate sheets

All decisions regarding incentives for custom projects are in the sole discretion of PECO

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 47

APPENDIX PROGRAM UPDATES SUMMARY (Q1 2017) Multifamily Nursing Home and Assisted Living retrofit customers need to apply for incentives through the PECO Smart Ideas Multi-Family Program administered by Franklin Energy For more information please contact Taylor Adler at tadlerfranklinenergycom or call 1-844-4BIZ-SAVE Multifamily Nursing Home and Assisted Living new construction customers can proceed with applying for incentives here

Revised Incentives

Data Centers

Measure Incentive Effective Immediately Previous Incentive

Air-cooled chiller for data centers $40ton $10ton Air-cooled chiller without condenser for data centers $20ton $10ton

Computer room air conditioner $30ton $7ton Water-cooled centrifugal chiller for data centers $30ton $5ton Water-cooled positive displacement or reciprocating chiller for data centers

$30ton $5ton

Uninterruptible power supply 20-100 kVA $10kVA $6kVA Uninterruptible power supply gt100 kVA $10kVA $1kVA Mainframe refresh $20kW installed $5kW installed Server refresh $20kW installed $4kW installed Server virtualization $400kW reduction $4kW reduction Thin clients $5units $4units

Lighting (Effective Immediately)

Measure Incentive Effective Immediately Specification Previous

Incentive Specification

New construction exterior LED outdoor flood light LED parking garage and canopy lighting LED polearm mounted parking and roadway lighting LED wall mount fixture

$005kWh (custom)

Lighting Power Density (LPD) Requirements Unchanged

$10-54 fixture

Lighting Power Density (LPD) (Wft2) by Space Type or Building Area

LED Replacement Lamps (Tubes) 2

$250lamp 5 Min Watts Reduced

$250lamp 6 Min Watts Reduced

LED Replacement Lamps (Tubes) 4

$400lamp 10 Min Watts Reduced

$400lamp 12 Min Watts Reduced

Permanent Fixture Removal $010Watt removed

Clarification of calculation to represent actual Wattage removed

$010Watt removed

Lighting (Effective 6117)

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 48

Measure Incentive Effective 6117 Specification Previous

Incentive Previous Specification

Interior LED high-bay fixtures andor retrofit kits if lt 20000 LED Lumens

$50fixture 150 Min Watts Reduced

$75fixture 150 Min Watts Reduced

Interior LED high-bay fixtures andor retrofit kits if gt 20000 LED Lumens

$75fixture 225 Min Watts Reduced

$75fixture 150 Min Watts Reduced

New Incentives

Compressed Air

Measure New Incentive Effective Immediately Variable speed air compressor $30compressor HP Compressed air system optimization $50compressor HP

HVAC

Measure New Incentive Effective Immediately ECM circulation pump $50pump Retro-commissioning cooling systems $750ton Retro-commissioning whole building $010square foot Energy management system $25ton Demand controlled ventilation $25ton Water-cooled air conditioner $22ton

Food Service

Measure New Incentive Effective Immediately Combination oven $200unit ENERGY STARreg commercial convection oven $150unit ENERGY STARreg commercial fryers $100unit ENERGY STARreg commercial hot holding cabinet $200unit

Refrigeration

Measure New Incentive Effective Immediately Air-cooled refrigeration condenser $10ton Oversized condenser with VFD $10ton Case light occupancy controls $750door

Lighting

Measure New Incentive Effective Immediately Interior central lighting controls $00175sq foot

Motors and Drives

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 49

-

Measure New Incentive Effective Immediately VFD for dust collection system motor $50HP

Application Clarifications and Revised Requirements

Clarification of LED Eligibility for New Construction or Retrofit Projects

LED Eligibility is determined by whether lighting products are listed in either the DesignLights Consortium (DLC) Qualified Products List of commercial-grade LED luminaires or the US Environmental Protection Agency database of ENERGY STAR certified products For products not yet listed contractors may submit LM79 and LM80 test reports PECO Smart Ideas engineers will review test reports to determine if the product in question meets performance specifications

Revised W 9 Requirement

W-9 forms EIN numbers are no longer required

Deletion of erroneous statement in New Construction Lighting

The following statement from previous Business Manual has been deleted ldquoThe minimum lighting power density used to calculate the incentive shall be no lower than 50 of the ASHRAE 901-2007 valuerdquo

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 50

  • Commercial amp Industrial Program Application Manual
    • Follow This Easy Process
      • Pre-Approval Application Checklist
      • Final Application Checklist
          • Terms and Conditions
            • Program Effective Dates
            • Program and Project Eligibility
            • Incentive Payment Limits
            • Application Review Process
            • Inspections andor PUCrsquos Statewide Program Evaluation
            • Requirements for Custom Project Electricity Savings Calculation
            • Tax Liability
            • No Endorsement
            • Warranties
            • Limitation of Liability
            • Assignment
            • Customerrsquos Certification
            • Termination
            • Acknowledgement
              • Retrofit Lighting Solutions
                • General Linear Fluorescent Lamp and Ballast Specification Requirements
                • LED Lamps and Fixtures
                • Minimum Watts Reduced
                • Linear LED (Tubes)
                • Permanent Fixture Removal
                  • LED Traffic Signals
                    • LED Traffic Signals Incentive Table
                      • New Construction Lighting Specifications
                        • New Construction Lighting Incentives Table
                          • New Construction Lighting Power Density Code
                              • Exterior New Construction Lighting
                              • HVAC Equipment
                                • Air-Source Air Conditioners and Air-Source Heat Pumps
                                • Package Terminal Systems (Replacements)
                                • Ductless Mini-Split Heat Pump lt54 Tons
                                • Geothermal Heat Pump
                                  • Other HVAC Equipment
                                    • Hotel Guest Room Occupancy Sensor
                                    • ECM Circulation Fan
                                    • ECM Circulation Pump
                                    • Retrocomissioning Cooling Systems
                                    • Retrocomissioning Whole Building
                                    • Energy Management System
                                    • Demand Controlled Ventilation
                                    • Other HVAC Incentives Table
                                      • Unitary HVAC Chillers
                                        • Air-Cooled Chillers Water Cooled Positive Displacement Reciprocating Chillers and Water Cooled Centrifugal Chillers
                                          • Refrigeration
                                            • Anti-Sweat Heater Controls
                                            • Evaporator Fan Controls
                                            • Floating Head Pressure Controls
                                            • Automatic Door Closers for Walk-In Coolers and Freezers
                                            • EC Motor for Walk-inReach-in Refrigerated cases or Freezer cases
                                            • ENERGY STAR Solid Door Freezer and Glass Door Freezer and Refrigerators
                                            • Refrigeration Suction Pipe Insulation
                                            • Night Cover
                                            • Strip Curtain on Walk-In CoolerFreezer
                                            • Evaporator Coil Defrost Control
                                            • Variable Speed Refrigeration Compressor
                                            • Add Doors to Open Refrigerated Cases
                                            • Door Gaskets
                                            • Zero Energy Doors
                                            • Air Cooled Refrigeration Condenser
                                            • Oversized Condenser with VFD
                                            • Case Light Occupancy Controls
                                            • LED Open Case Lighting
                                            • LED Enclosed Case Lighting Refrigerated
                                            • LED Enclosed Case Lighting Freezer
                                              • Food Service
                                                • Beverage and Snack Machine Controls
                                                • ENERGY STARreg Refrigerated Beverage Vending Machines
                                                • ENERGY STARreg Electric Steam Cooker
                                                • ENERGY STARreg Electric Combination Oven
                                                • ENERGY STARreg Commercial Convection Oven
                                                • ENERGY STARreg Commercial Fryers
                                                • ENERGY STARreg Commercial Hot Holding Cabinet
                                                  • Motors and Variable Frequency Drives
                                                    • Early Replacement Motors
                                                    • Variable Frequency Drives on HVAC Fan Applications
                                                    • Variable Frequency Drives on Pump Applications
                                                    • Variable Speed Control for Kitchen Exhaust Hoods
                                                    • Variable Speed Drives for Process or Other Equipment
                                                      • Domestic Hot Water
                                                        • Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater
                                                        • Heat Pump Water Heater
                                                        • Low Flow Pre-Rinse Spray Valve
                                                        • Domestic Hot Water Incentive Table
                                                          • Compressed Air Systems
                                                            • No-loss Condensate Drain
                                                            • Air-Entraining air nozzle
                                                            • Storage Tanks for LoadNo Load Screw Compressors
                                                            • Cycling Refrigerated Thermal Mass Dryer
                                                            • Variable Speed Air Compressor
                                                            • Compressed Air System Optimization
                                                            • Compressed Air Systems Incentive Table
                                                              • Data Centers
                                                                • Air Cooled Chiller
                                                                • Air Cooled Chiller without Condenser
                                                                • Computer Room Air Conditioner
                                                                • Computer Room Air Handler Variable Speed
                                                                  • Replacing constant speed CRAH with VSD CRAH
                                                                    • Water Cooled Centrifugal Chiller
                                                                    • Water Cooled Positive Displacement or Reciprocating Chiller
                                                                    • Uninterruptible Power Supply
                                                                    • Mainframe Refresh
                                                                    • Server Refresh
                                                                      • Whole Building Systems
                                                                        • Whole Building Systems Approach
                                                                        • How to Apply for Whole Building Systems Incentives
                                                                        • Customer Eligibility
                                                                        • Project Eligibility
                                                                        • Whole Building Systems Incentives Table
                                                                          • Custom Project Specifications
                                                                            • Instructions for Energy Savings Calculations for Custom Projects
                                                                            • Equipment Information Submittals
                                                                            • Energy Savings Calculations
                                                                            • Baseline for Custom Analysis
                                                                            • Baseline or Existing System Summary

Termination

PECO reserves the right to extend modify (this includes modification of program incentive levels) or terminate this program without prior or further notice

Acknowledgement

I have read understood and am in compliance with all rules and regulations concerning this incentive program I certify that all information provided is correct to the best of my knowledge and I give PECO permission to share my records with the Pennsylvania PUC and agents representatives and contractors it selects to manage coordinate or evaluate the program Additionally I hereby authorize PECO to have reasonable access to my property to inspect the installation and performance of the equipment and installations that are eligible for incentives under the guidelines of the program

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 10

Retrofit Lighting Solutions

General Linear Fluorescent Lamp and Ballast Specification Requirements 32w 4ft HPT8 and reduced wattage T8 lamps must be listed on the Consortium of Energy Efficiency (CEE) product list or must meet CEE standards For further information visit wwwcee1org

LED Lamps and Fixtures The integral lamp or fixture must appear on the Energy Star Qualified Products List or the Design Lights Consortium Qualified Products List

bull Energy Star Qualified Fixture Product List httpwwwenergystargov bull Energy Star Qualified Integral LED lamps httpwwwenergystargov bull Design Lights Qualified Product List httpwwwdesignlightsorg

Minimum Watts Reduced Energy efficient fixtureslamps are required to be lower in load than existing fixtureslamps by specified levels the Minimum Watts Reduced Each lighting measure has its own Minimum Watts Reduced that must be met as eligibility requirement These levels are listed in the lighting worksheet ldquoLighting Incentives Tablersquo tab and reproduced below

Linear LED (Tubes) Linear LED lamps must be listed on the Design LightsTM Consortium (DLC) Qualified Products List

Type A LEDs bull Type A LED linear lamps are powered by a fluorescent ballast bull If present existing magnetic ballast must be removed and replaced with a compatible energy- efficient electronic ballast bull DLC Primary Use Requirement ndash DLC-listed equipment must be classified with one of the following Primary Use designations

o Replacement Lamps (Plug and Play) (UL Type A) bull Label must be affixed to the interior of fixture in a prominent location Label should indicate that the fixture has been retrofitted with

TLEDs and that fluorescent lamps should not be installed as replacements

Type B LEDs bull Type B LED tubes are powered by an internal driver bull Existing fluorescent ballast must be removed and fixturersquos incoming power wires are connected directly to the lamp sockets Strict

adherence to installation instructions is critical when rewiring existing fixtures

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 11

bull The LED linear lamps must be delivered as part of a UL 1598C Classified Luminaire Retrofit Kit with instructions explaining the LED linear lamps must be installed on a luminaire that is already UL Listed

bull The retrofitted luminaire must be clearly identified using the label included with the Retrofit Kit indicating that the luminaire has been modified and can no longer operate the originally intended fluorescent lamp(s)

Type C LEDs

bull Type C LED linear lamps are powered by an external driver bull Existing fluorescent ballast must be removed and replaced with a compatible external driver bull DLC Primary Use Requirement ndash DLC-listed equipment must be classified with one of the following Primary Use designations

o 2-lamp External Driver Lamp-Style Retrofit Kits (UL Type C) o 3-lamp External Driver Style Retrofit Kits (UL Type C) o 4-lamp External Driver Lamp-Style Retrofit Kits (UL Type C)

bull Technical specifications (manufacturerrsquos cut sheet) for the driver must be submitted with the application

Permanent Fixture Removal This measure is to be used only in conjunction with lighting retrofits and is intended for spaces that are currently over lit Incentives are paid $010watt reduced only on fixtures removed not on total watts reduced for entire projects Overall net lumen reduction must be achieved in order to qualify for a permanent fixture removal incentive

Example

(20) Existing fixtures at 10000 lumens each = 200000 lumens

(14) Proposed fixtures at 15000 lumens each = 210000 lumens

Since there is not a net reduction in lumens the six fixtures removed would not be eligible for a permanent fixture removal incentive

It is encouraged that spaces meet recommended foot-candle levels as detailed by IESNA Lighting Design Guide A Program Engineer will evaluate lumens reduction based on the type of fixtures removed and the DLC lumens rating of the fixtures installed

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 12

RETROFIT INTERIOR LIGHTING TABLE

Measure Code

Min Measure Name Watts Incentive Unit

Reduced Technical Specifications

CFL Lighting

CFL1A ENERGY STAR Hard-Wired CFL fixture Indoor AccentTrack 20 $250 lamp

Only complete new fixtures or modular hardwired retrofits with hardwired electronic ballasts qualify

CFL ballast must be programmed start or programmed rapid start with a power factor (PF) ge 090 and a total

harmonic distortion (THD) le 20 Screw-in CFLs are not eligible for this incentive

CFL1B ENERGY STAR Hard-Wired CFL fixture Indoor Directional WallCeiling Mount 20 $250 lamp

CFL1C ENERGY STAR Hard-Wired CFL fixture Indoor Omni-Directional WallCeiling Mount 20 $250 lamp

CFL2A ENERGY STAR Hard-Wired CFL fixture Indoor Portable LampTorchiere 20 $1 lamp

CFL2B ENERGY STAR Hard-Wired CFL fixture Indoor Recessed Downlight 20 $1 lamp

CFL2C ENERGY STAR Hard-Wired CFL fixture Indoor Recessed Downlight Retrofit Module 20 $1 lamp

CFL2D ENERGY STAR Hard-Wired CFL fixture Indoor Under CabinetStrip 20 $1 lamp

CFL3A ENERGY STAR Hard-Wired CFL fixture Outdoor Directional WallCeilingGroundPole Mount 30 $3 lamp

CFL3B ENERGY STAR Hard-Wired CFL fixture Outdoor Omni-Directional WallCeilingGroundPole Mount 30 $3 lamp

CFL3C ENERGY STAR Hard-Wired CFL fixture Outdoor Recessed Downlight 30 $3 lamp

CFL3D ENERGY STAR Hard-Wired CFL fixture Outdoor Recessed Downlight Retrofit Module 30 $3 lamp

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 13

Fluorescent Lighting FL1 Interior T5 New Fluorescent Fixture w Electronic Ballast 11 $5 fixture Any T5 is eligible

FL2 T5HO High-Bay Fixture 54 $25 fixture Fixture efficiency must be gt 90

High bay fixtures must be installed at least 15ft above finished floor

FL3 HPT8 High-Bay Fixture 82 $20 fixture Must use High Ballast Factor (gt96) Fixture efficiency must be gt= 85

High bay fixtures must be installed at least 15ft above finished floor

FL4 HPT8 Fixture 20 $5 fixture Must use Low Ballast Factor (lt80)

FL5 RW T8 Lamp - Lamp only 10 $3 lamp Existing T8 fixture re-ballasting to a higher ballast factor are not eligible

HID Measures HID1 Ceramic HID - 25 -39 Watt 95 $13 fixture

Replacing higher wattage HID or High Pressure Sodium or Mercury Vapor

Interior replacements only

HID2 Ceramic HID - 70 Watt 155 $13 fixture HID3 Ceramic HID - 100 Watt 170 $15 fixture HID4 Pulse Start HID - 150 nominal Watts 72 $10 fixture HID5 Pulse Start HID - 350 nominal Watts 100 $13 fixture

HID6 Pulse Start HID - 1000 nominal Watts 400 $15 fixture

Interior LED Fixtures

LED1 ENERGY STAR Integral LED fixture Indoor Recessed Downlight Retrofit Module 38 $7 fixture Retrofit module of existing recessed fixture

LED2 ENERGY STAR Integral LED fixture Indoor Recessed Downlight 38 $7 fixture

New indoor recessed downlight fixture LED3 ENERGY STAR Integral LED fixture Indoor Portable LampTorchiere 30 $7 fixture

LED4 LED AccentTrack Lighting Fixtures 32 $6 head

LED5 LED Low-Bay Fixtures 150 $20 fixture For replacement of HID fixtures mounted le 15 above finished floor

LED6 LED Low-Bay Retrofit Kits 150 $20 fixture

LED8 LED Troffer Fixtures and Retrofit Kits 5 $10 fixture Troffers typically installed in lay-in ceilings 2x2 2x4 configuration

LED9 LED Surface and Suspended Linear Fixtures 25 $10 fixture Examples of LED surface-mounted luminaires include wrap vapor tight and strip fixtures (non-cooler)

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 14

-

Interior LED High Bay Fixtures

LED10A LED High-Bay Fixtures le 20000 LED lumens 150 $50 fixture

High bay fixtures must be installed at least 15ft above finished floor

LED10B LED High-Bay Fixtures gt 20000 LED lumens 225 $75 fixture

LED11A LED High-Bay Retrofit Kits le 20000 LED lumens 150 $50 fixture

LED11B LED High-Bay Retrofit Kits gt20000 LED lumens 225 $75 fixture

LED Parking Garage and Canopy Fixtures

LED12 LED Parking Garage and Canopy Fixtures and Retrofit Kits Outdoor lt= 5000 LED lumens 50 $15 fixture

Fixtures must be physically installed in a parking garage (area where vehicles are physically parked) or

fuel pump canopy Typically represents replacement of le175 W Metal

Halide or equivalent

LED13 LED Parking Garage and Canopy Fixtures and Retrofit Kits Outdoor 5001 - 10000 LED lumens 70 $30 fixture

Typically represents replacement of Metal Halide or equivalent greater than 175W and less than 400W

Product must be installed in a parking garage (area where vehicles are physically parked) or fuel pump

canopy

LED14 LED Parking Garage and Canopy Fixtures and Retrofit Kits Outdoor gt 10000 LED lumens 150 $50 fixture

Typically represents replacement of ge400 W Metal Halide or equivalent

Product must be physically installed in a parking garage (area where vehicles are physically parked) or

fuel pump canopy LED Screw in Lamps

ESLED1 ENERGY STAR Screw-in LED Bulb (Decorative Globe) 14 $5 lamp Lamp with globe shape such as type G

ESLED2 ENERGY STAR Screw-in LED Bulb (Decorative non-globe 14 $5 lamp Lamps with non-globe or candle-like shape such as type B C CA F

ESLED3 ENERGY STAR Screw-in LED Bulb and Low Voltage Mini-Reflector Bulbs (DirectionalReflector) 14 $5 lamp ANSI standard PAR and MR type lamps

ESLED4 ENERGY STAR Screw-in LED Bulb (Standard) 14 $5 lamp Lamp such as A series

ESLED5 ENERGY STAR Screw-in LED Bulb (Standard 3-Way) 14 $5 lamp Lamp such as A series with three light levels

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 15

- -LED Screw in Lamps Smart Bulbs

ESLED6 ENERGY STAR Screw-in LED Bulb (Decorative Globe Smart Bulb) 14 $5 lamp Lamp with globe shape such as type G

ESLED7 ENERGY STAR Screw-in LED Bulb (Decorative non-globe Smart Bulb) 14 $5 lamp Lamps with non-globe or candle-like shape such as

type B C CA F

ESLED8 ENERGY STAR Screw-in LED Bulb (DirectionalReflector Smart Bulb) 14 $5 lamp ANSI standard PAR lamps

ESLED9 ENERGY STAR Screw-in LED Bulb (Standard Smart Bulb) 14 $5 lamp Lamp such as A series

LED Tubes (replacing fluorescent)

TLED1 LED Replacement Lamps (Tubes) 2 5 $250 lamp Refer to Lighting Technical Specifications for requirements DLC Type A B and C are eligible bullType B linear (Interior driver) LEDs have the following installation requirements

bullExisting fluorescent ballast must be removed and fixturersquos incoming power wires are connected directly to the lamp sockets Strict adherence to installation instructions is critical when rewiring existing fixtures bullThe LED linear lamps must be delivered as part of a UL 1598C Classified Luminaire Retrofit Kit with instructions explaining the LED linear lamps must be installed on a luminaire that is already UL Listed bullThe retrofitted luminaire must be clearly identified using the label included with the Retrofit Kit indicating that the luminaire has been modified and can no longer operate the originally intended fluorescent lamp(s)

TLED2 LED Replacement Lamps (Tubes) 4 10 $4 lamp

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 16

LED Exterior Lighting

ELED1 ENERGY STAR Integral LED fixture Outdoor Recessed Downlight Retrofit Module 24 $10 module

ENERGY STAR or DLC Qualified fixtures ELED2 ENERGY STAR Integral LED fixture Outdoor Recessed

Downlight 24 $10 fixture

ELED3 LED Outdoor Flood Light Fixtures lt= 5000 LED lumens 50 $10 fixture Typically represents replacement of le175 W Metal Halide or equivalent Fixtures must be DLC qualified

ELED4 LED Outdoor Flood Light Fixtures gt 5000 LED lumens 70 $15 fixture Typically represents replacement of Metal Halide or equivalent greater than 175W Fixtures must be DLC qualified

ELED5 LED PoleArm Mounted Parking and Roadway Fixtures and Retrofit Kits lt= 5000 LED lumens 50 $25 fixture Typically represents replacement of le175 W Metal

Halide or equivalent Product must be DLC qualified

ELED6 LED PoleArm Mounted Parking and Roadway Fixtures and Retrofit Kits Outdoor gt 10000 LED lumens 150 $75 fixture

Typically represents replacement of Metal Halide or equivalent greater than 400W Product must be DLC

listed

ELED7 LED PoleArm Mounted Parking and Roadway Fixtures and Retrofit Kits Outdoor 5001 - 10000 LED lumens 70 $50 fixture

Typically represents replacement of Metal Halide or equivalent greater than 175W and less than 400W

Product must be DLC listed

ELED8 LED Wall Mount Fixtures and Retrofit Kits Outdoor lt= 5000 LED lumens 50 $25 fixture Typically represents replacement of le175 W Metal

Halide or equivalent Product must be DLC qualified

ELED9 LED Wall Mount Fixtures and Retrofit Kits Outdoor gt 5000 LED lumens 70 $50 fixture

Typically represents replacement of Metal Halide or equivalent greater than 175W Product must be DLC

qualified Permanent Fixture Removal

PFRA Indoor Permanent Fixture Removal combined with lighting retrofit na $010 watt removed Incentive only valid when units = ldquofixturerdquo in this table

Incentive is only offered when net lumens are reduced PFRB Outdoor Permanent Fixture Removal combined with lighting retrofit na $010 watt removed

Other LED Lighting LEDEXIT LED Exit Sign

na

$2 sign Replacing Incandescent or Fluorescent

SIGN1A Indoor LED Channel Signage $8 letter

Replacing Neon SIGN1B Outdoor LED Channel Signage $8 letter

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 17

Lighting Controls

CTL Unitary Sensor Controls

na

$1500 sensor

Passive infrared ultrasonic detectors are eligible Includes daylighting controls and all occupancy controls

Controls can be onoff stepped or continuous (dimming) Daylight sensor controls are required to be commissioned in order to ensure proper sensor calibration and energy savings

Minimum of 30 watts controlled per control

CLC Interior Central Lighting Controls $00175

square foot of area

under control

Automated central lighting control systems with override capabilities

This measure includes centrally-controlled time clocks wireless on off switches bi level switches computer based

controls pre-set scene selection dimmable ballasts and on-off dimmer switches for non-personal tuning

Floor plan must be submitted verifying square footage

DAYOCC Controls Combination - Daylighting and Occupancy Fixture Mounted $1500 sensor Minimum of 30 watts controlled per control

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 18

LED Traffic SignalsThis measure applies to the early replacement of existing incandescent traffic lights and pedestrian signals with LEDs New LED traffic signals must comply with ENERGY STAR requirements which can be found at httpswwwenergystargoviapartnersproduct_specseligibilitytraffic_eligpdf98bfshy1786

LED Traffic Signals Incentive Table

Round Traffic Signals 8 Red

Incentive per Signal

$15

8 Yellow 8 Green 12 Red

12 Yellow 12 Green

Turn Arrow Signals

8 Red

$13

8 Yellow 8 Green 12 Red

12 Yellow 12 Green

Pedestrian Signals

9 Pedestrian Only

$13

12 Hand Only 12 Pedestrian Only 12 Countdown Only

12 Pedestrian and Hand Overlay 16 Pedestrian and Hand Side by

Side 16 Pedestrian and Hand Overlay

16 Hand and Countdown Side-by-Side

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 19

Lighting Controls that Exceed Code Requirements

New Construction Lighting SpecificationsUnder the Lighting Power Density Approach the lighting power installed is compared with the lighting power allowed by code Incentives are available for systems where the installed lighting power is lower than the code-allowed power by at least 10 Savings are based on the Lighting Power Density (LPD) calculated on a watts per square foot basis Incentives will be paid only on the area of the building where the lighting installation is complete and is ready for occupancy If a portion of a building is not built-out such that the lighting in an area is not complete and ready for occupancy then that portion is not eligible for an incentive Baseline lighting power density is based on ASHRAE 901- 2007 Either the Space-by-Space or Building Area method may be used to calculate the LPD for the purposes of the incentive

Required Documentation bull Lighting Worksheet bull COMcheck Interior Lighting Report or equivalent analysis demonstrating space-byshy

space or building area calculations bull Reflected ceiling plans and electrical plan sheets showing lighting fixture layout bull Lighting fixture schedule sheet including fixture counts bull Fixture submittal or specification sheets showing model number and rated fixture wattage bull Architectural floor plans displaying floor area affected by proposed lighting installation

New Construction Lighting Incentives Table Lighting Wattssq ft

Improvement over of Code Incentive

gt= 10 and lt 20 $0035sq gt= 20 and lt 30 $007sq ft gt= 30 and lt 40 $0105sq

gt= 40 $021 sq ft

Incentives will be paid on a ($005kWh) custom basis Please contact Program Staff for eligibility of lighting controls for New Construction projects

Interior Occupancy Sensors Incentives are offered for occupancy-based controls in areas where they are not required by code Passive infrared ultrasonic detectors and fixture-integrated sensors or sensors with a combination sensor are eligible All sensors must be hard-wired and control interior lighting fixtures The incentive is per Watt controlled An inventory of the controlled fixtures and their wattage must be provided for each sensor with the Final Application

Daylight Dimming System Incentives are offered for daylight sensor controls in spaces with suitable available ambient light for at least part of the day Light may be through skylights clerestories windows or ldquolight tubesrdquo The controls can be onoff stepped or continuous dimming The onoff controller should turn off artificial lighting when the interior illuminance meets the desired indoor lighting level The stepped controller generally dims the artificial lighting 50 when the interior illuminance levels reach 50 of the desired lighting levels Continuous or dimming controllers dim artificial lighting proportionally to the available ambient light All types of daylight sensor controls are required to be commissioned in order to ensure proper sensor calibration and energy savings

Required Documentation bull Cut sheets or submittals of lighting control systems Reflected ceiling plans or schedule

showing which fixtures are controlled by lighting controls

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 20

New Construction Lighting Power Density CodeRequirements ndash Space by Space Method

Building Specific Space Types LPD (Wft2) Building Specific Space Types LPD (Wft2)

GymnasiumExercise Center AutomotivemdashServiceRepair 07

Playing Area 14 Manufacturing

Exercise Area 09 Low (lt25 ft Floor to Ceiling Height) 12

CourthousePolice StationPenitentiary High (gt25 ft Floor to Ceiling Height) 17

Courtroom 19 Detailed Manufacturing 21

Confinement Cells 09 Equipment Room 12

Judges Chambers 13 Control Room 05

Fire Stations HotelMotel Guest Rooms 11 Fire Station Engine Room 08 DormitorymdashLiving Quarters 11

Sleeping Quarters 03 Museum

Post Office-Sorting Area 12 General Exhibition 10 Convention Center-Exhibit Space 13 Restoration 17

Library BankOfficemdashBanking Activity Area 15 Card File and Cataloging 11 Religious Buildings

Stacks 17 Worship Pulpit Choir 24

Reading Area 12 Fellowship Hall 09

Hospital Retail

Emergency 27 Sales Area [For accent lighting see 93121(c)] 17

Recovery 08 Mall Concourse 17

Nurse Station 10 Sports Arena

ExamTreatment 15 Ring Sports Area 27

Pharmacy 12 Court Sports Area 23

Patient Room 07 Indoor Playing Field Area 14

Operating Room 22 Warehouse

Nursery 06 Fine Material Storage 14

Medical Supply 14 MediumBulky Material Storage 09

Physical Therapy 09 Parking GaragemdashGarage Area 02

Radiology 04 Transportation

LaundrymdashWashing 06 AirportmdashConcourse 06

AirTrainBusmdashBaggage Area 10

TerminalmdashTicket Counter 15

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 21

New Construction Lighting Power Density CodeRequirements ndash Building Area Method

Building Area Type 221 LPD (Wft2)

Automotive facility 09

Convention center 12

Courthouse 12

Dining bar loungeleisure 13

Dining cafeteriafast food 14

Dining family 16

Dormitory 1

Exercise center 1

Gymnasium 11

Health-care clinic 1

Hospital 12

Hotel 1

Library 13

Manufacturing facility 13

Motel 1

Motion picture theater 12

Building Area Type LPD (Wft2)

Multifamily 07

Museum 11

Office 1

Parking garage 03

Penitentiary 1

Performing arts theater 16

Policefire station 1

Post office 11

Religious building 13

Retail 15

Schooluniversity 12

Sports arena 11

Town hall 11

Transportation 1

Warehouse 08

Workshop 14

221 In cases where both a common space type and a building specific type are listed the building specific space type shall apply

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 22

Exterior New Construction LightingExterior New Construction savings over code lighting power density will be incentivized using custom lighting measure at $005kWh rate Participants must submit exterior lighting plans Submittals COMCHECK REPORT and lighting schedule for exterior lighting Savings are calculated from the LPD (Wsq ft) indicated below Additional information may be required based on the building exterior type and space description indicated below To contribute to incentive LEDs must satisfy program requirements for DLC Energy Star or equivalent listing

Required Documentation bull COMcheck Interior Lighting Report or equivalent analysis demonstrating space-by-space or

building area calculations bull Drawings showing lighting fixture layout bull Lighting fixture schedule sheet including fixture counts bull Fixture submittal or specification sheets showing model number and rated fixture wattage

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 23

Building Exterior Space Description LPD

Unco erect Pariki Ilg Area Parlurng ots arnd Drives 0 15 WfW

B i ing Grournds W al 1Yays lless Hlan 11] e 10 Wltirneru- 00

W a Nays 10 middot de or greater 112 W

Plaza a reas

Spec rest re areas

Stainh1ays 1ow 2

B i ing 8ntrames and Exits Ma efilbies m wr near foot of door width

Other doors 2o w 1r ear foot of door width

Ctmqpies and Overhimgs Free starndillg and a ched tmd 12s w m2 m bullerhangs

0 door sales Op en areas (ind udi Ilg ve id e sales 05 W lo )

street frontage far vehicle sales lots 21] W linear toot in addi middot on to open are-0bullmiddot lo~nce

B i ing facades 0 2 W tfl2 middot or eacil illumirnated N311 or surface

o r 5 0 Wllinear root fo r eac h m n inated N3l1 o r

surface length

Automated te lle r rnachmiddot es a lld 210 W per loca tion plus 91] night deposito liies W 1pernddiliorml A I middot per

1oca middot om

Eirltrances and gatehouse inspecliion 125 W ffl2 o middot uncovered slatiaBS a goo~ ed acir ies area

Load ing are-0s or law enforcement 0 5 W 2 of u rnco1bullered area fire ambu rnce and otiher emergency service ibullehmiddotctes

Drive-through w indOWs a taslrood 400 W per drive-Hlrough restaurants

Parking near 24 -h our retail 80111 W per main entry entmn ces

HVAC Equipment Air-Source Air Conditioners and Air-Source Heat Pumps New unitary air conditioning units or air source heat pumps that meet or exceed the qualifying cooling efficiency shown in the HVAC Incentives Worksheet are eligible for an incentive They can be either split systems or single package units The efficiency of split systems is based on an ARI reference number All packaged and split system cooling equipment must meet Air Conditioning and Refrigeration Institute (ARI) standards (210240 320 or 340360) be UL listed use a minimum ozone-depleting refrigerant (eg HCFC or HFC) All required efficiencies are based on the Consortium for Energy Efficiency (CEE) high-efficiency commercial air conditioning and heat pump specifications (wwwcee1org) A manufacturerrsquos specification sheet indicating the system efficiency must accompany the application Disposal of the existing unit

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 24

must comply with local codes and ordinances

Package Terminal Systems (Replacements) Package terminal air conditioners and packaged terminal heat pumps are through-the-wall self-contained units that are 2 tons (24000 Btuh) or less All EER values must be rated at 95degF outdoor dry-bulb temperature

Ductless Mini-Split Heat Pump lt54 Tons Incentives are offered for Ductless Mini-Split Heat Pump lt54 Tons with SEER rating greater than or equal to 120 and EER greater than or equal to 145 and HSPF greater than or equal to 90

Geothermal Heat Pump Geothermal equipment is a high-efficiency groundwater source water source or ground source heat pump system that meets or exceeds the energy efficiency requirements shown in the tables below These measures do not apply to heat pump systems coupled with non-heat pump systems such as chillers rooftop AC units boilers or cooling towers which must be filed as custom measures All HVAC applications other than comfort cooling and heating such as process cooling must also be applied for as custom measures

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 25

HVAC Heating Qualifying Incentive

Equipment Type and Cooling Capacity Cooling Qualifying Efficiency ($ per cooling Measure Code Efficiency

ton)

Air Cooled Air Conditioner

H01 lt 54 tons (lt 65000 Btuhr) 15 SEER NA $22

H02 lt 54 and lt 11 25 tons

125 IEER $22 (lt 65 000 Btuh and lt 135 000 Btuhr) NA

H03 lt11 25 and lt 20 tons

123 IEER NA $22 (lt 135000 Btuh and lt 240000 Btuhr)

H04 lt 20 and lt 6333 tons (~

11 1 IEER NA $22 240000 Btuh and lt 760000 Btuhr)

HOS ~ 6333 Ions (~ 760000 Btuhr) 103 IEER NA $22

Air Cooled Heat Pumps

H06 lt 54 tons (lt 65000 Btuhr) 143 SEER 87 HSPF $30

H07 lt 54 and lt 11 25 tons

123 IEER 3 3 COP $30 (lt 65000 Btuh and lt 135000 Btuhr)

HOS lt11 25 and lt 20 tons

1U IEER 3 2 COP $30 (lt 135000 Btuh and lt 240000 Btuhr)

H09 lt 2000 tons (240000 Btuhr) 105 IEER 3 2 COP $30

Packaged Terminal Systems (PTAC and PTHP) (PTHP only)

H10 lt 8000 Btuhr (lt066 tons) 11 8 EER 33 $17

H11 ~8000 and lt10500 Btuhr (~066 and lt 0875 tons) 11 4 EER 32 $17

H12 gt10500 Btuhr ( 875 tons) 107 EER 31 $17

H22 lt 54 tons (lt 65000 Btuhr) 121 EER 12 3 IEER NA $22

lt 54 and lt 11 25 tons 121 EER 12 3 IEER $22 H23

(lt 65000 Btuh and lt 135000 Btuhr) NA

H24 lt11 25 and lt 20 tons

120 EER 12 2 IEER $22 (lt 135000 Btuh and lt 240000 Btuhr) NA

H25 lt20 and lt 633 tons

119 EER 12 2 IEER $22 (lt 240000 Btuh and lt 760000 Btuhr) NA

H26 ~ 633 tons( lt760000 Btuhr) 110 EER 11 1 IEER NA

$22

HVAC Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 26

Other HVAC EquipmentHotel Guest Room Occupancy Sensor Incentives are offered for occupancy-based controls that control electric air conditioning air source heat pumps and or electric heating units for individual hotel rooms Systems with nonshyelectric heat are not eligible Sensors must be controlled by automatic occupancy detectors or a key-card system and the default setting for controlled units differ by at least 5 degrees (or shut the unit fan and heating or cooling off completely) from the operating set point during unshyoccupied periods The control system may also be tied into other electric loads such as lighting and plug loads to shut them off when occupancy is not sensed The incentive is per room Replacement or upgrades of existing occupancy-based controls are not eligible as a prescriptive incentive

Economizer Integrated Dual Enthalpy Economizer ControlsThis measure is targeted to non-residential establishments whose HVAC equipment is not equipped with a functional economizer

Circulation Fan High-Volume Low-SpeedFans must be greater than 16 feet in diameter and have variable speed control

ECM Circulation Fan This measure is targeted to non-residential customers whose air handling equipment currently uses a SP or PSC fan motor rather than an ECM This measure applies only to circulating fan motors of 1 HP or less Above 1 HP motors are governed by NEMA standards and would see little to no efficiency benefit by adding an ECM The targeted fan can supply heating or cooling only or both heating and cooling

ECM Circulation Pump This measure is targeted for replacement of a shaded pole or permanent split capacitor pump or motor with an electronically commutated pump or motor le75 HP

Retrocomissioning Cooling Systems Confined to chiller plant andor isolated packaged units For reservation must contain proposal with defined scope at equipment level that demonstrates energy savings For final approval required final commissioning report including raw data (TAB reports) demonstrating actual scope

This prescriptive measure can be used for facilities with maximum cooling demand less than 1687 tons Larger systems require the use of custom HVAC measure

Retrocomissioning Whole Building Covers all relevant major mechanical systems such as chiller plant air side systems compressed air andor process systems For reservation must contain proposal with defined scope at equipment level that demonstrates energy savings For final approval required final commissioning report including raw data (TAB reports) demonstrating actual scope

This prescriptive measure can be used for facilities less than 404858 square feet Larger facilities require the use of custom HVAC measure

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 27

Energy Management System For installing a web-based building automation system in existing buildings that currently have no digital automated HVAC controls or have outdated pneumatic control systems with inoperable time control functions Existing HVAC control systems must not have time-of-day scheduling Upgrading obsolete EMS HVAC system with inoperable time clock functions will be reviewed on a case-by-case basis for incentive eligibility This incentive cannot be combined with incentives for programmable thermostats or setback-setup controls Must include the controls strategy and a scaled floor-plan with controlled areas highlighted HVAC BAS systems must be new and include bull Central time clock control bull Web-based interface with PC-based controls and graphic bull Building performance Tracking bull Open-protocol architecture controls system shall consist of either LonTalk (ANSICEA 7091) or BACNet (ASHRAE ANSI 135) protocol being used between all controlled and controlling devices and every node on the network bull Minimum setback period must exceed 2200 hours per year bull A minimum setback space temperature of at least 10degF when heating and 5degF when cooling bull Ability to adjust schedules and settings remotely over the internet bull Report generation describing energy and operating trends

This prescriptive measure can be used for facilities with maximum cooling demand less than 456 tons Larger systems require the use of custom HVAC measure

Demand Controlled Ventilation New ventilation controls must use carbon dioxide levels to measure occupancy and modify the percentage of outside air based on occupancy levels Only buildings with space heating and cooling requirements are eligible Conditioned spaces must be kept between 65ordmF and 75ordmF during occupied operating hours Carbon dioxide sensors must be installed in conjunction with fully functioning motor operated outside air dampers Dual temperature air-side economizers with zone-level CO2 sensors for rooftop units are eligible

This prescriptive measure can be used for facilities with maximum cooling demand less than 2210 tons Larger systems require the use of custom HVAC measure

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 28

Other HVAC Measures- consult project manual for eligibility specifications HVAC

Measure Incentive Unit Quantity Incentive

Measure Code er Unit

H1 8 Hotel Guest Room Occupancy Sensor Room $20

H1 9 Economizer Integrated Dual Enthalpy Economizer Controls Ton $1 5

H20 Circulation Fan High-Volume Low-Speed Unit $30

H21 ECM Circulation Fan Fan $1 5

H27 ECM Circulation Pump Pump $50

H28 Retrocommissioning Cooling Systems

Ton $750

H29 Retrocommissioning Whole Buidling

Square Foot $010

H29 Energy Management System Ton $2500

H30 Demand Controlled Ventilation Ton $2500

Other HVAC Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 29

Unitary HVAC Chillers

Air-Cooled Chillers Water Cooled Positive Displacement Reciprocating Chillers and Water Cooled Centrifugal Chillers Chiller applications including existing multiple chiller configurations (including redundant or lsquostand-byrsquo chillers) existing chillers serving multiple load groups and chillers in industrial applications are defined as non-standard applications and must follow a site-specific custom protocol $005kWh) rate

Incentives are offered for chillers with an IPLV value (expressed in kW per ton) that is less than or equal to the qualifying efficiency shown in the table below The chiller efficiency rating must be based on ARI Standard 550590-2003 for IPLV conditions The chillers must meet ARI standards 550590-2003 be UL listed and use a minimum ozone-depleting refrigerant (eg HCFC or HFC) The ARI net capacity value should be used to determine the chiller tons A manufacturerrsquos specification sheet with the rated kWton-IPLV or COP-IPLV must accompany the application along with the four point performance data that is the basis for the IPLV The application must include a certification that the chiller is appropriately sized for site design load conditions

Chillers must satisfy efficiency requirements for both full load and IPLV efficiencies for either Path A or Path B The table shows the minimum efficiency ratings to qualify for the prescriptive incentive which must be consistent with the expected operating conditions of the efficient chiller For example if the efficient chiller satisfies Path A and generally performs at part load the appropriate baseline chiller efficiency is the IPLV value under Path A If the efficient chiller satisfies Path B and generally performs at full load the appropriate baseline chiller efficiency is the full load value under Path B Generally chillers operating above 70 percent load for a majority (50 or more) of operating hours should use Path A and chillers below 70 load for the majority of operating hours should use Path B

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 30

C3 lt 75 tons

C4 75 tons and lt 150 tons

cs ~ 150 tons and lt 300 tons C6 ~ 300 tons

Water Cooled Centrifugal Chillers C7 lt 300 tons CB ~ 300 tons and lt 600 tons

C9 ~ 600 tons

Path A

Qualifying Full Load Efficiency

Qualifying IPLV Efficiency

Path B

Qualifying Full Load Efficiency

Qualifying IPLV Efficiency

0780 kWton 0567 kWton 0800 kWton 0540 kWton

0775 kWton 0554 kWton 0790 kWton 0527 kWton

0680 kWton 0522 kWton 0718 kWton 0486 kWton 0620 kWton 0486 kWton 0639 kWton 0441 kWton

0634 kWton 0536 kWton 0639 kWton 0405 kWton 0576 kWton 0494 kWton 0600 kWton 0360 kWton

0570 kWton 0494 kWton 0590 kWton 0360 kWton

I

Incentive ($ton)

$17

$17

Unitary Chiller Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 31

Refrigeration

Anti-Sweat Heater Controls Incentives are offered for devices that sense the relative humidity in the air outside of the display case and cycles or turns off the glass door (if applicable) and frame anti-sweat heaters when the ambient dew point is below a preset set point Technologies that can turn off anti-sweat heaters based on sensing condensation (on the inner glass pane) also qualify Incentive is based on the number of doors

Evaporator Fan Controls This measure is for the installation of controls in medium temperature walk-in coolers The controller reduces airflow of the evaporator fans when there is no refrigerant flow The measure must control a minimum of 120 HP where fans operate continuously at full speed The measure also must reduce fan motor power by at least 75 during the off cycle This measure is not applicable if any of the following conditions apply 1) Compressor runs all the time with high duty cycle 2) Evaporator fan does not run at full speed all the time 3) Evaporator fan motor runs on poly-phase power 4) Evaporator fan motor is not shaded-pole or permanent split capacitor (PSC) 5) Evaporator fan does not use off-cycle or time-off defrost

Floating Head Pressure Controls Controls must vary head pressure to adjust condensing temperatures in relation to outdoor air temperature Must replace existing constant pressure or manually controlled systems to achieve reduced head pressure in order to maintain a minimum saturated condensing temperature of 70 degF or a 20 degF variance below design heat pressure during mild weather conditions Compressor size must be at least 5 HP

Automatic Door Closers for Walk-In Coolers and Freezers The auto-closer should be applied to the main insulated opaque door(s) of a walk-in cooler or freezer The auto-closer must be able to firmly close that door when it is within one inch of full closure This must be a newly installed automatic door closer replacements on previously installed door closers are not eligible for an incentive

EC Motor for Walk-inReach-in Refrigerated cases or Freezer cases Incentives are offered for replacement of an existing standard-efficiency shaded-pole or permanent split capacitor evaporator fan motor in refrigerated display cases or fan coil in walk-ins The replacement unit must be an Electronically Commutated Motor (ECM) This measure cannot be used in conjunction with the Evaporator Fan Controller measure

ENERGY STAR Solid Door Freezer and Glass Door Freezer and Refrigerators Incentives are offered for replacement of existing self-contained refrigerators and freezers with units that are ENERGY STARreg listed Only units with built-in refrigeration systems are qualified Units with remote refrigeration systems or units do not qualify Customers must provide proof that the appliance meets the CEE or ENERGY STAR efficiency specifications using ASHRAE Standard 72-2005 (38degF plusmn 2degF) Incentive is per unit

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 32

Refrigeration Suction Pipe Insulation 1 Must insulate bare refrigeration suction lines of 1 58 inches in diameter or less on existing equipment only 2 Cooler lines require frac34 inch of flexible closed-cell nitrite rubber or an equivalent insulation 3 Freezer lines require 1-inch of flexible closed-cell nitrite rubber or an equivalent insulation 4 Insulation exposed to the outdoors must be protected from the weather (ie jacketed with a medium-gauge aluminum jacket)

Night Cover 1 Must install a cover on an existing open refrigerated display case to decrease its cooling load during off hours 2 The equipment manufacturer must not object to the use of night covers for the existing display case model 3 This rebate is based on the linear footage of the installed 4 The cover must be applied for a period of at least six hours

Strip Curtain on Walk-In CoolerFreezer 1 New strip curtains or plastic swinging doors must be installed on doorways of refrigerated spaces (conditioned to less than 50deg F) 2 Rebate is based on the linear footage of the doorway that the strip curtains are being installed in 3 Opening between the strip curtain and bottom of doorway must be no larger than 1 inch 4 Strips must have an overlay greater than 1 inch

Evaporator Coil Defrost Control 1The current system must include an operating electric defrost system with a functional electroshymechanical time clock 2 Evaporator coil temperature and pressure must be monitored by controller in order to determine optimal defrost cycles 3 New intelligent control systems to control the defrost systems will typically replace timed- defrost controls

Variable Speed Refrigeration Compressor This measure VSD control for refrigeration systems and its eligibility targets applies to retrofit construction in the commercial and industrial building sectors it is most applicable to grocery stores or food processing applications with refrigeration systems This protocol is for a VSD control system replacing a slide valve control system

Add Doors to Open Refrigerated Cases The eligible retrofit equipment is either no sweat doors or doors with anti-sweat heaters If a lighting retrofit is included with the new doors it must consume the same amount of energy or less energy than the old lighting Upgrades to lighting or other system components should be processed separately Horizontal cases are not eligible and should be processed as custom

Door Gaskets PECO Smart Ideas For Your Business CampI Program Application Manual

Q1 2017 pg 33

This measure is applicable to commercial refrigeration and applies to the replacement of worn-out gaskets with new better-fitting gaskets Applicable gaskets include those located on the doors of walk-in andor reach-in coolers and freezers This protocol applies to the main doors of both low temperature (ldquofreezerrdquo ndash below 32 degF) and medium temperature (ldquocoolerrdquo ndash above 32 degF) walk-ins

Zero Energy Doors For this measure a no-heatlow-heat clear glass door must be installed on an upright display case It is limited to door heights of 57 inches or more Doors must have either heat reflective treated glass be gas filled or both This measure applies to low temperature cases onlymdashthose with a case temperature below 0degF Doors must have 3 or more panes Total door rail glass and frame heater amperage ( 120 volt) cannot exceed 039413 amps per door for low temperature display cases Rebate is based on the door width (not including case frame)

Air Cooled Refrigeration Condenser Approach temperature lt8F for low temperature loads lt13F for medium temperature loads

Oversized Condenser with VFD New standalone condenser must no more than 150 larger than load

Case Light Occupancy Controls Acceptable for freezer or refrigerated cases as well as open cases or cases with doors

LED Open Case Lighting For replacing open case T8 or T12 fluorescent fixtures with DLC listed LEDs on refrigerators coolers and freezers

LED Enclosed Case Lighting Refrigerated LED case lighting with or without motion sensors on enclosed refrigerated vertical displays The baseline equipment is assumed to be cases with uncontrolled T8 or T12 linear fluorescent lamps

LED Enclosed Case Lighting Freezer LED case lighting with or without motion sensors on enclosed freezer vertical displays The baseline equipment is assumed to be cases with uncontrolled T8 or T12 linear fluorescent lamps

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 34

Refrigeration Measures Ref Measure

Measure Incentive Unit IncentiveUnit Code R01 Anti-Sweat Heater Controls Door $30

R02 Evaporator Fan Controls Controller $50

R03 Floating-head Pressure Controls HP $20

R04 Automatic Door Closers fo r Walk-in Coolers Door $75

R05 Automatic Door Closers fo r Walk-in Freezers Door $75

R06 Evaporator Fan EC Motor fo r Reach- in Cases Motor $35

RO Evaporator Fan EC Motor fo r Walk-in Cases Motor $50

R08 ENERGY STARreg Glass Door Freezer lt15 Cu Ft Unit $100

R09 ENERGY STARreg Glass Door Freezer 15- 49 Cu Ft Unit $125

R10 ENERGY STARreg Glass Door Freezer ~ 50 Cu Ft Unit $145

R11 ENERGY STARreg Solid Door Freezer Unit $75

R12 ENERGY STARreg Glass Door Refrigerator lt50 Cu Ft Unit $30

R13 ENERGY STARreg Glass Door Refrigerator gt= 50 Cu Ft Unit $50

K14 t NtKGY ~ I AKreg ~Olld Uoor Ketngerator $ OU Cu t-t Unit $~0

R15 Suction Pipe Insulation Walk-in Coolers Linear Foot $050

R16 Suction Pipe Insulation Walk in Freezers Linear Foot $075

R17 Night Cover Linear Foot $800

R18 Strip Curtains on Walk-in Cooler Linear Foot $250

R19 Evaporator Coil Defrost Control Controller $7500

R20 Variable Speed Refrigeration Compressor Compressor $85

R21 Add Doors to Open Refrigerated Cases Door $55

R22 Door Gaskets Door $250

R23 Zero Energy Doors Door $50

R24 A ir Cooled Refrigeration Condenser Ton $10

R25 Oversized Condenser with VFD Ton $10

R26 Case Light Occupancy Controls Door $8

R27 LED Open Cose Lighting Cose $10

R28 LED Enclosed Case Lighting Refrigerated Door $30

R30 LED Enclosed Case Lighting Freezer Door $30

Refrigeration Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 35

Food Service Beverage and Snack Machine Controls Incentives are offered for refrigerated vending machines that contain non-perishable bottled and canned beverages Controller for both types of systems must include a passive infrared occupancy sensor to turn off fluorescent lights and other energized machine systems when the surrounding area is unoccupied for 15 minutes or longer For the refrigerated machines the control logic may include periodic power up at 2-hour intervals or longer to maintain product temperature and provide compressor protection

ENERGY STARreg Refrigerated Beverage Vending Machines Incentives are offered for ENERGY STARreg beverage vending machines Qualifying machines can be found at httpswwwenergystargovproductsothervending_machines

ENERGY STARreg Electric Steam Cooker This measure applies to the installation of electric ENERGY STAR steam cookers as either a new item or replacement for an existing unit Gas steam cookers are not eligible The steam cookers must meet minimum ENERGY STAR efficiency requirements A qualifying steam cooker must meet a minimum cooking efficiency of 50 percent and meet idle energy rates specified by pan capacity

ENERGY STARreg Electric Combination Oven This measure applies to electric ovens capable of handling single 12 x 20 x 25 pan per rack

ENERGY STARreg Commercial Convection Oven The oven must meet or exceed heavy load potato cooking energy efficiency of greater than 70 utilizing ASTM Standard F149 Applies only to electric ovens

ENERGY STARreg Commercial Fryers The commercial fryer must have a tested heavy load (French fry for large vats) cooking energy efficiency of greater than 80 utilizing American Society for Testing and Materials (ASTM) Standard F1361 for commercial fryers and ASTM Standard F2144 for large vat fryers Multiple vat configurations are paid per qualifying vat ENERGY STAR maintains a list of qualifying products and specifications at httpwwwenergystargov

ENERGY STARreg Commercial Hot Holding Cabinet Energy STAR rating electric

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 36

Food Service amp Other Measures FoodOther

Measure Incentive Unit Incentive

Measure Code Unit

F01 Beverage Machine Controls Unit $25

F02 Snack Machine Controls Unit $20

F03 ENERGY STARreg Refrigerated Beverage Vending Machir Unit $125

F04 ENERGY STARreg Commerc ial Steam Cooker Unit $200

F05 ENERGY STARreg Electric Combination Oven Unit $200

F06 ENERGY STARreg Commercial Electric Convection Oven Unit $150

F07 ENERGY STARreg Commerc ial Fryers Unit $100

F08 ENERGY STARregCommerc ial Hot Holding Cabinet Unit $200

Food Service Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 37

Motors and Variable Frequency DrivesEarly Replacement Motors For constant speed and uniformly loaded motors this measure applies to the replacement of old motors with new energy efficient motors of the same rated horsepower Old motors must be less than 15 years Replacements where the old motor and new motor have different horsepower ratings are considered custom measures Motors with variable speeds variable loading or industrial-specific applications are also considered custom measures

Motors Incentive Table Motors

Measure Code

HP Incentive per Motor

M01 15 - 10 $40 M02 11 - 50 $100 M03 51-100 $150 M04 gt100 $300

Only VFDs on unitary systems are eligible Non-unitary systems must be submitted as a custom measure Soft start motors are not eligible

Variable Frequency Drives on HVAC Fan Applications Incentives are offered for installing VFDs on existing HVAC fans that do not have pre-existing VFDs This measure applies to HVAC supply and return fans only All other fans including cooling tower fans must be submitted as custom measures Manually fixed speed settings on HVAC fans must be submitted via custom application The VFD must control motor speed automatically in response to pressure flow temperature or other variable signal The installation of a VSD must accompany the permanent removal or disabling of any throttling devices such as inlet vanes bypass dampers and throttling valves etc The incentive is offered per controlled HP

Variable Frequency Drives on Pump Applications Incentives are offered for installing VFDs on existing chilled water pumps and heating hot water pumps that do not have existing VFDs This measure applies to chilled water pumps and heating hot water pumps only All other pumps must be submitted as custom measures Manually fixed speed settings on pumps must be submitted via custom application The VFD must control motor speed automatically in response to pressure flow temperature or other variable signal The installation of a VSD must accompany the permanent removal or disabling of any throttling devices such as throttling valves The incentive is offered per controlled HP

Variable Speed Control for Kitchen Exhaust Hoods The measure consists of installing a new VSD in conjunction with a sensor control system that varies the exhaust rate of kitchen ventilation (exhaust andor makeup air fans) based on the heat and effluent output from the cooking appliances (ie the more heat and smokevapors generated the more ventilation needed) This involves installing a temperature sensor in the hood exhaust collar andor an optic sensor on the end of the hood that senses cooking conditions and allows the system to automatically vary the rate of exhaust to match requirements by adjusting the fan speed accordingly

Variable Speed Drives for Process or Other Equipment VFD must be used in conjunction with a process (non HVAC) application To qualify for this incentive the driven equipment must operate at least 2000 hours per year Redundant or back- up units do not qualify VFDs replacing existing VFDs do not qualify The VFD must control motor

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 38

speed automatically in response to pressure flow temperature or other variable signal VFDs installed as ldquosoft startrdquo without automatic manual closed loop speed control do not qualify The installation of a VFD must accompany the permanent removal or disabling of any throttling devices such as throttling valves The incentive is per controlled HP and only applies to controlled motors less than 50 HP

VSDVFD Incentives Table VFD

Measure Code

Measure Unit Incentive per Unit

Fan Application

V01 VFD on HVAC Fan HP $25 Pump Application

Variable Speed Control for Kitchen Exhaust Hoods

Variable Speed Drives for Process or Other Equipment

V02 VFD on Chilled Water Pumps HP $25 V03 VFD on Heating Hot Water Pumps HP $25

V04 Kitchen Exhaust Fan Retrofit Hood HP $500

V05 Process Motor lt 50 HP HP $50

Domestic Hot Water Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater This measure documents the energy savings attributed to converting from a standard electric water heater to an ENERGY STAR natural gaspropane-fired water heater or a standard oil-fired water heater with an Energy Factor of 0585

Heat Pump Water Heater This includes heat pump water heaters with energy factors meeting ENERGY STAR criteria The measure described here involves a direct retrofit of a resistive electric water heater with a heat pump water heater It does not cover systems where the heat pump is a pre-heater or is combined with other water heating sources More complicated installations can be treated as custom projects

Low Flow Pre-Rinse Spray Valve This measure applies to efficient low flow pre-rinse sprayers in grocery and food service applications The most likely areas of application are kitchens in restaurants and hotels Only premises with electric water heating may qualify for this incentive In addition the replacement pre-rinse spray nozzle must use less than 16 gallons per minute with a cleanability performance of 26 seconds per plate or less Low flow pre-rinse sprayers reduce hot water usage and save energy associated with water heating

Domestic Hot Water Incentive Table

Measure Code Measure Unit Retrofit Incentive per

Unit

W01 Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater Unit $100

W02 Heat Pump Water Heater Unit $100 W03 Low-Flow Pre-Rinse Spray Valve Valve $17

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 39

Compressed Air SystemsNo-loss Condensate Drain No-loss Condensate Drains are controlled by a sensor that monitors the level of condensate and only open when there is a need to drain condensate They close before compressed air is allowed to escape This measure is targeted to non-residential customers whose equipment is a timed drain that operates on a pre-set schedule Acceptable baseline conditions are compressed air systems with standard condensate drains operated by a solenoid and timer

Air-Entraining air nozzle This measure is targeted to non-residential customers whose compressed air equipment uses stationary air nozzles in a production application with an open copper tube of 18rdquo or 14rdquo orifice diameter Energy efficient conditions require replacement of an inefficient non-air entraining air nozzle with an energy efficient air-entraining air nozzle that use less than 15 CFM at 100 psi for industrial applications

Storage Tanks for LoadNo Load Screw Compressors This measure protocol applies to the installation of air receivers with pressureflow controls to loadno load compressors Loadno load compressors unload when there is low demand The process of unloading is done over a period of time to avoid foaming of the lubrication oil Using a storage tank with pressureflow control will buffer the air demands on the compressor Reducing the number of cycles in turn reduces the number of transition times from load to no load and saves energy The baseline equipment is a loadno load compressor with a 1 galcfm storage ratio or a modulating compressor with blowdown The high efficiency equipment is a loadno load compressor with a minimum storage ratio of 4 gallons of storage per cfm

Cycling Refrigerated Thermal Mass Dryer When air is compressed water vapor in the air condenses and collects in liquid form Some of this condensate collects in the air distribution system and can contaminate downstream components such as air tools with rust oil and pipe debris Refrigerated air dryers remove the water vapor by cooling the air to its dew point and separating the condensate Changes in production and seasonal variations in ambient air temperature lead to partial loading conditions on the dryer Standard air dryers use a hot gas bypass system that is inefficient at partial loads A Cycling Thermal Mass Dryer uses a thermal storage medium to store cooling capacity when the system is operated at partial loads allowing the dryer refrigerant compressor to cycle

This measure is targeted to non-residential customers whose equipment is a non-cycling refrigerated air dryer with a capacity of 600 cfm or below Acceptable baseline conditions are a non-cycling (eg continuous) air dryer with a capacity of 600 cfm or below The replacement of desiccant deliquescent heat-of-compression membrane or other types of dryers does not qualify under this measure

Variable Speed Air Compressor This type of compressor uses a special drive to control the speed (RPM) of the unit which in turn saves energy compared to a fixed speed equivalent

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 40

No-loss Condensate Drain Air-Entraining Air Nozzle Cycling Refrigerated Thermal Mass Dryer

Compressor Incentive per

Equipment Type Units Quantity Daily Operating Unit

Hours

CA04 Storage Tanks for LoadNo Load Screw

Compressor HP $10 Compressors

CA05 Variable Speed Air Compressor

Compressor HP $30

CA06 Compressed Air System Optimization

Compressor HP $50

Compressed Air System Optimization The submitted optimization measures must be identified in an Air System Audit or equivalent study to be eligible The measures must demonstrate energy savings as evaluated by a Program Engineer Additionally measures must also fall under one or more of the category below to be eligible

1) Install storage Receivers (new receivers only replacing existing storage receivers are ineligible)

2) Compressor control (must demonstrate improvement in partial load efficiency of the compress air system including reduceeliminate partially loaded units)

3) Dryer control 4) Source pressure reduction 5) Right-sizing distribution components such as piping filters regulators

connectors and hoses (routine maintenance replacements are ineligible) 6) Leakage detection and repair 7) Eliminate low-efficiency end-usages of compressed air 8) Heat recovery (most reduce electricity consumption of the replaced heat source)

Compressed Air Systems Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 41

lt65000 Btuh

~ 65000 Btuh and lt135000 Btuh

135000 Btuhand lt240000 Btuh

240000 Btuh and lt760000 Btuh

760000 Btuh

154

142

135

125

123

Chiller Capacity Path APath B efficiency (kWton )

lt 150 tons

~150 tons and lt300 tons

300 tons and lt400 tons

400 tons and lt600 tons

600 tons

lt75 tons

~75 tons and lt150 tons

~150 tons and lt300 tons

~300 tons and lt600 tons

600 tons

0610 FU0695 FL and 0550 IPLV0440 IPLV

0610 FU0635 FL and 0550 IPLV0400 IPLV

0560 FU0595 FL and 0520 IPLV0390 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

Path APath B efficiency (kWton )

0750 FU0780 FL and 0600 IPLV0500 IPLV

0720 FU0750 FL and 0560 IPLV0490 IPLV

0660 FU0680 FL and 0540 IPLV0440 IPLV

0610 FU0625 FL and 0520 IPLV0410 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

Data Centers Data Center incentives are available for facilities ranging in size from office server closets to large standalone facilities

Air Cooled Chiller Path APath B EER (BtuWh) lt150 tons 101 FL97 FL and 137 IPLV158 IPLV ge150 tons 101 FL97 FL and 140 IPLV161 IPLV

Air Cooled Chiller without Condenser Air-cooled chillers without condenser must be rated with matching condensers and comply with air-cooled chiller efficiency requirements

Computer Room Air Conditioner

Computer Room Air Handler Variable Speed Replacing constant speed CRAH with VSD CRAH

Water Cooled Centrifugal Chiller

Water Cooled Positive Displacement or Reciprocating Chiller

Uninterruptible Power Supply Must be Energy Star Certified UPS or have full load efficiency rating

ge948 for 20-100 kVA ge978for ge100 kVA

Mainframe Refresh The rated efficiency of the replacement Mainframes power supply must be at least 8 more

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 42

- Equipment Type Units IncentiveUnit

D1 Air Cooled Chiller Ton $4000 D2 Air Cooled Chiller W ithout Condenser Ton $2000 D3 Computer Room Air Conditioner Ton $3000 D4 Computer Room Air Handler Variable Speed Ton $1000 D5 Water Cooled Centrifugal Chiller Ton $3000 D6 Water Cooled Positive Displacement or Reciprocatin $3000 D7 Uninterruptible Power Supply 20-100 kVA $1000 D8 Uninterruptible Power Supply gt 100 kVA $1000 D9 Mainframe Refresh $2000

D10 Server Refresh $2000 D11 PC Power Managment System $600 D12 HVAC System Optimization $005 D1 3 HoUCold Aisle Containment kWh saved $005 D14 Server Virtualization kW reduction $40000 D1 5 Thin Clients Units $500

efficient compared to the existing Mainframes power supply The replacement Mainframe if Inactive must be decommissioned and removed from the Data Center

Server Refresh Replacement servers must be ENERGY STARreg certified Replacement servers power supply must be 5 more efficiency compared to the power supply of the replaced servers The replaced server must be decommissioned and removed from the data center

HVAC System Optimization Final system must have these features

-Implementation of free cooling by the addition of an economizer system -Conversion of constant speed CRACCRAH into variable speed operations using VFDs and additional control functionalities and -Elevation of exhaust air temperature

HotCold Aisle Containment Includes both Hot and Cold Aisles Installing new containment measures not replacing already existed aisle containment Plenum-only installations not eligible Must result in higher difference between the return air (hot aisle) and supply air (cold aisle) temperatures measured at rack intake and exhaust locations

Server Virtualization Minimum of consolidating 5 Servers virtualized into one Server The virtualized servers if inactive are removed from the Data Center

Thin Clients Must be ENERGY STAR certified thin clients Decommissioned clients are removed from the Data Center

Data Center Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 43

Whole Building Systems Whole Building Systems Approach

The Whole Building Systems approach is intended to encourage integrated energy efficient designs by providing enhanced incentives to the customer who addresses overall energy performance Owners of eligible and qualifying new construction and major renovation projects can receive Whole Building Systems incentives when energy modeling indicates the projectrsquos performance is over 10 better than the ASHRAE 901-2007 Savings from eligible electric end-uses in kilowatt hours define the amount of financial incentive Energy savings achieved through renewable energy sources are not counted toward project energy savings and are not included in the savings basis Incentive reservations obtained during the design phase of a project will be honored for up to 24 months

How to Apply for Whole Building Systems Incentives Before construction begins bull A Pre-notification Application must be submitted documenting the Owners intention to

seek Whole Building Systems incentives bull The Owner must confirm the goals and energy efficiency strategies being pursued by the

design team on the completed Pre-notification Worksheet (Checklist tab) and in the project Summary (Whole Building Performance Summary tab)

bull Submit executable building modeling software files bull Submit the Whole Building Performance Summary worksheet energy simulation model

inputs and outputs and supporting documentation bull Receive confirmation and eligibility notification from the PECO Smart Ideas team and

receive an incentive reservation bull The final incentive paid may differ from the reserved incentive amount The final

incentive will be calculated based on site-verified equipment installation and performance The Owners final application and complete documentation must be received within 6 months of equipment installation or certificate of occupancy whichever is later

bull An executable energy model and model output demonstrating compliance with the criteria of ASHRAE 901-2007 Appendix G will be required and the equipment data sheets LED lighting fixtures must be on the DLC or Energy STAR qualified products list (QPL) to be eligible LED fixtures not on the DLC or Energy STAR QPL has the option of submitting LM79 and LM80 test reports for evaluation against DLC and Energy STAR eligibility criteria

During the construction period bull Owner and design team continue to work closely with their chosen contractor to assure

energy efficiency measures are included and installed in the completed building

When the building is constructed and operational bull Complete the Owner final application Request an equipment verification site visit by the

PECO Smart Ideas team Equipment must be installed and fully operational o Program staff will schedule a site visit and utilize submitted documentation and

measurement tools to verify that the installation follows the submitted energy simulation model

bull When PECO confirms that there are no significant changes to the installed equipment payment of the reserved incentive will be made to the Owner within 6 weeks

bull If changes from the proposed design energy simulation are found the Owner and design team will be notified of the reduced incentive amount a period of 20 calendar days will

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 44

Improvement Incentive per Sq Ft

over Code

~11 to lt20 $0155

~20 to lt30 $0233

~30 to lt40 $0350

~40 to lt60 $0525

~60 $0700

be allowed for supplemental information to be provided if no additional information is received by PECO Smart Ideas team the reduced incentive payments will be made and sent to the Owner if additional clarification and information is available program staff will work diligently to resolve the discrepancies and arrive at a reasonable incentive adjustment with the customer

Payments made by PECO Smart Ideas are final

Customer Eligibility The Owner of the proposed new building project must be a customer of PECO and receive delivery of electric service from PECO to receive kilowatt-hour based incentives Please note that electricity supply can be provided by any vendor

Project Eligibility bull The project must be a new construction or major renovation Major renovations involving

the removal and redesign of at least two building systems (such as interior lighting and mechanical systems) may apply for Whole Building Systems incentives

bull To qualify for incentives projects must demonstrate energy efficiency enhancements that achieve at least 11 improvement in the proposed design versus the standard baseline

bull The Owner must submit a Pre-approval Application to the program at the stage where changes for increased energy efficiency are still feasible and construction has not been completed

bull Projects receiving Whole Building Systems incentives are not eligible to receive other incentives such as the prescriptive or custom program incentives for the same scope

bull Project components that are NOT eligible for consideration as a basis for PECO Smart Ideas include the following o Alternative fuel sources (eg use of gas or oil equipment in lieu of electric) Please note

that combined heat and power (CHP) systems will be incentivized for the electricity they produce

o Renewable energy sources (eg solar wind biomass) bull Ineligible savings include exterior lighting process receptacle miscellaneous loads and

other unregulated end-uses Custom incentives are available for new construction exterior lighting

Whole Building Systems Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 45

Custom Project Specifications Instructions for Energy Savings Calculations for Custom Projects Custom projects must involve measures that result in a reduction in electric energy use (kWh) Electricity savings may result from either efficiency improvements or fuel switching Custom Incentives are based on the first year kilowatt-hour savings Custom applications must be accompanied by detailed engineering calculations that document the annual total energy savings

The following serve as guidelines for the minimum required documentation

Equipment Information Submittals bull A list of the present and proposed equipment and components to be installed

including manufacturerrsquos catalogmodel number bull Manufacturerrsquos specification sheets showing capacities and performance for all major

components

Energy Savings Calculations Provide calculations documenting the predicted energy consumption of the existing (or baseline) and proposed system using appropriate analytical tools and clearly stated assumptions Calculations may be performed by ldquohandrdquo but spreadsheet analysis or more rigorous modeling is preferred All analysis should be provided in electronic format All assumptions such as operating hours existing and proposed equipment operational details must be presented Engineering algorithms and procedures from recognized technical organizations such as ASHRAE SMACNA ANSI etc must be used Use rated performance factors tested under accepted procedures specified by recognized rating agencies such as AHRI ANSI ASTM etc Provide an explanation when equipment performance rating conditions vary from standard conditions

In support of the calculations extensive documentation must be provided that provides the basis for the savings estimates The documentation must provide information on the equipment operating schedule daily and seasonal load profile and baseline AND energy efficient equipment performance at the operating loads Typical documentation for custom projects often includes bull Engineering or architectural drawings and ldquoequipment schedulerdquo sheets bull Component specification sheets that include part load efficiency or performance

factors bull Spreadsheet calculations or inputoutput files and results from system modeling or

other engineering analysis using accepted engineering algorithms and practices bull Log sheets trend logs from a building management system or other operating

documentation that are often necessary to document operating hours and equipment loading and used as a basis for the calculations (in some cases short term monitoring may be required to document the load profile)

bull Control sequence of operations that are necessary where controls play a part in the savings equation

Additional documentation other than that described in the application may be required for program participation Larger projects may also require pre- and post-project sub metering or monitoring of loads andor power input as part of another measurement and verification activity to demonstrate the actual energy savings that are realized

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 46

Baseline for Custom Analysis Where equipment is replaced prior to the end of its rated service life in order to achieve energy savings the existing equipment performance may be used as the baseline in the energy savings calculations Where equipment is replaced due to failure or for other reasons (such as obsolescence or a need for more capacity) the baseline performance used in the savings calculation should be either the minimum performance that would be required by code for that equipment type and application (where a code applies) or the performance of the equipment that would have been selected as the customers standard practice when a code does not apply

Baseline or Existing System Summary On custom worksheet on application form include make model number name plate information (such as operating voltage and rated full load amps) rated capacity quantities equipment condition and age facility operating hours equipment operating schedule and load curves If needed attach separate sheets

All decisions regarding incentives for custom projects are in the sole discretion of PECO

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 47

APPENDIX PROGRAM UPDATES SUMMARY (Q1 2017) Multifamily Nursing Home and Assisted Living retrofit customers need to apply for incentives through the PECO Smart Ideas Multi-Family Program administered by Franklin Energy For more information please contact Taylor Adler at tadlerfranklinenergycom or call 1-844-4BIZ-SAVE Multifamily Nursing Home and Assisted Living new construction customers can proceed with applying for incentives here

Revised Incentives

Data Centers

Measure Incentive Effective Immediately Previous Incentive

Air-cooled chiller for data centers $40ton $10ton Air-cooled chiller without condenser for data centers $20ton $10ton

Computer room air conditioner $30ton $7ton Water-cooled centrifugal chiller for data centers $30ton $5ton Water-cooled positive displacement or reciprocating chiller for data centers

$30ton $5ton

Uninterruptible power supply 20-100 kVA $10kVA $6kVA Uninterruptible power supply gt100 kVA $10kVA $1kVA Mainframe refresh $20kW installed $5kW installed Server refresh $20kW installed $4kW installed Server virtualization $400kW reduction $4kW reduction Thin clients $5units $4units

Lighting (Effective Immediately)

Measure Incentive Effective Immediately Specification Previous

Incentive Specification

New construction exterior LED outdoor flood light LED parking garage and canopy lighting LED polearm mounted parking and roadway lighting LED wall mount fixture

$005kWh (custom)

Lighting Power Density (LPD) Requirements Unchanged

$10-54 fixture

Lighting Power Density (LPD) (Wft2) by Space Type or Building Area

LED Replacement Lamps (Tubes) 2

$250lamp 5 Min Watts Reduced

$250lamp 6 Min Watts Reduced

LED Replacement Lamps (Tubes) 4

$400lamp 10 Min Watts Reduced

$400lamp 12 Min Watts Reduced

Permanent Fixture Removal $010Watt removed

Clarification of calculation to represent actual Wattage removed

$010Watt removed

Lighting (Effective 6117)

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 48

Measure Incentive Effective 6117 Specification Previous

Incentive Previous Specification

Interior LED high-bay fixtures andor retrofit kits if lt 20000 LED Lumens

$50fixture 150 Min Watts Reduced

$75fixture 150 Min Watts Reduced

Interior LED high-bay fixtures andor retrofit kits if gt 20000 LED Lumens

$75fixture 225 Min Watts Reduced

$75fixture 150 Min Watts Reduced

New Incentives

Compressed Air

Measure New Incentive Effective Immediately Variable speed air compressor $30compressor HP Compressed air system optimization $50compressor HP

HVAC

Measure New Incentive Effective Immediately ECM circulation pump $50pump Retro-commissioning cooling systems $750ton Retro-commissioning whole building $010square foot Energy management system $25ton Demand controlled ventilation $25ton Water-cooled air conditioner $22ton

Food Service

Measure New Incentive Effective Immediately Combination oven $200unit ENERGY STARreg commercial convection oven $150unit ENERGY STARreg commercial fryers $100unit ENERGY STARreg commercial hot holding cabinet $200unit

Refrigeration

Measure New Incentive Effective Immediately Air-cooled refrigeration condenser $10ton Oversized condenser with VFD $10ton Case light occupancy controls $750door

Lighting

Measure New Incentive Effective Immediately Interior central lighting controls $00175sq foot

Motors and Drives

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 49

-

Measure New Incentive Effective Immediately VFD for dust collection system motor $50HP

Application Clarifications and Revised Requirements

Clarification of LED Eligibility for New Construction or Retrofit Projects

LED Eligibility is determined by whether lighting products are listed in either the DesignLights Consortium (DLC) Qualified Products List of commercial-grade LED luminaires or the US Environmental Protection Agency database of ENERGY STAR certified products For products not yet listed contractors may submit LM79 and LM80 test reports PECO Smart Ideas engineers will review test reports to determine if the product in question meets performance specifications

Revised W 9 Requirement

W-9 forms EIN numbers are no longer required

Deletion of erroneous statement in New Construction Lighting

The following statement from previous Business Manual has been deleted ldquoThe minimum lighting power density used to calculate the incentive shall be no lower than 50 of the ASHRAE 901-2007 valuerdquo

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 50

  • Commercial amp Industrial Program Application Manual
    • Follow This Easy Process
      • Pre-Approval Application Checklist
      • Final Application Checklist
          • Terms and Conditions
            • Program Effective Dates
            • Program and Project Eligibility
            • Incentive Payment Limits
            • Application Review Process
            • Inspections andor PUCrsquos Statewide Program Evaluation
            • Requirements for Custom Project Electricity Savings Calculation
            • Tax Liability
            • No Endorsement
            • Warranties
            • Limitation of Liability
            • Assignment
            • Customerrsquos Certification
            • Termination
            • Acknowledgement
              • Retrofit Lighting Solutions
                • General Linear Fluorescent Lamp and Ballast Specification Requirements
                • LED Lamps and Fixtures
                • Minimum Watts Reduced
                • Linear LED (Tubes)
                • Permanent Fixture Removal
                  • LED Traffic Signals
                    • LED Traffic Signals Incentive Table
                      • New Construction Lighting Specifications
                        • New Construction Lighting Incentives Table
                          • New Construction Lighting Power Density Code
                              • Exterior New Construction Lighting
                              • HVAC Equipment
                                • Air-Source Air Conditioners and Air-Source Heat Pumps
                                • Package Terminal Systems (Replacements)
                                • Ductless Mini-Split Heat Pump lt54 Tons
                                • Geothermal Heat Pump
                                  • Other HVAC Equipment
                                    • Hotel Guest Room Occupancy Sensor
                                    • ECM Circulation Fan
                                    • ECM Circulation Pump
                                    • Retrocomissioning Cooling Systems
                                    • Retrocomissioning Whole Building
                                    • Energy Management System
                                    • Demand Controlled Ventilation
                                    • Other HVAC Incentives Table
                                      • Unitary HVAC Chillers
                                        • Air-Cooled Chillers Water Cooled Positive Displacement Reciprocating Chillers and Water Cooled Centrifugal Chillers
                                          • Refrigeration
                                            • Anti-Sweat Heater Controls
                                            • Evaporator Fan Controls
                                            • Floating Head Pressure Controls
                                            • Automatic Door Closers for Walk-In Coolers and Freezers
                                            • EC Motor for Walk-inReach-in Refrigerated cases or Freezer cases
                                            • ENERGY STAR Solid Door Freezer and Glass Door Freezer and Refrigerators
                                            • Refrigeration Suction Pipe Insulation
                                            • Night Cover
                                            • Strip Curtain on Walk-In CoolerFreezer
                                            • Evaporator Coil Defrost Control
                                            • Variable Speed Refrigeration Compressor
                                            • Add Doors to Open Refrigerated Cases
                                            • Door Gaskets
                                            • Zero Energy Doors
                                            • Air Cooled Refrigeration Condenser
                                            • Oversized Condenser with VFD
                                            • Case Light Occupancy Controls
                                            • LED Open Case Lighting
                                            • LED Enclosed Case Lighting Refrigerated
                                            • LED Enclosed Case Lighting Freezer
                                              • Food Service
                                                • Beverage and Snack Machine Controls
                                                • ENERGY STARreg Refrigerated Beverage Vending Machines
                                                • ENERGY STARreg Electric Steam Cooker
                                                • ENERGY STARreg Electric Combination Oven
                                                • ENERGY STARreg Commercial Convection Oven
                                                • ENERGY STARreg Commercial Fryers
                                                • ENERGY STARreg Commercial Hot Holding Cabinet
                                                  • Motors and Variable Frequency Drives
                                                    • Early Replacement Motors
                                                    • Variable Frequency Drives on HVAC Fan Applications
                                                    • Variable Frequency Drives on Pump Applications
                                                    • Variable Speed Control for Kitchen Exhaust Hoods
                                                    • Variable Speed Drives for Process or Other Equipment
                                                      • Domestic Hot Water
                                                        • Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater
                                                        • Heat Pump Water Heater
                                                        • Low Flow Pre-Rinse Spray Valve
                                                        • Domestic Hot Water Incentive Table
                                                          • Compressed Air Systems
                                                            • No-loss Condensate Drain
                                                            • Air-Entraining air nozzle
                                                            • Storage Tanks for LoadNo Load Screw Compressors
                                                            • Cycling Refrigerated Thermal Mass Dryer
                                                            • Variable Speed Air Compressor
                                                            • Compressed Air System Optimization
                                                            • Compressed Air Systems Incentive Table
                                                              • Data Centers
                                                                • Air Cooled Chiller
                                                                • Air Cooled Chiller without Condenser
                                                                • Computer Room Air Conditioner
                                                                • Computer Room Air Handler Variable Speed
                                                                  • Replacing constant speed CRAH with VSD CRAH
                                                                    • Water Cooled Centrifugal Chiller
                                                                    • Water Cooled Positive Displacement or Reciprocating Chiller
                                                                    • Uninterruptible Power Supply
                                                                    • Mainframe Refresh
                                                                    • Server Refresh
                                                                      • Whole Building Systems
                                                                        • Whole Building Systems Approach
                                                                        • How to Apply for Whole Building Systems Incentives
                                                                        • Customer Eligibility
                                                                        • Project Eligibility
                                                                        • Whole Building Systems Incentives Table
                                                                          • Custom Project Specifications
                                                                            • Instructions for Energy Savings Calculations for Custom Projects
                                                                            • Equipment Information Submittals
                                                                            • Energy Savings Calculations
                                                                            • Baseline for Custom Analysis
                                                                            • Baseline or Existing System Summary

Retrofit Lighting Solutions

General Linear Fluorescent Lamp and Ballast Specification Requirements 32w 4ft HPT8 and reduced wattage T8 lamps must be listed on the Consortium of Energy Efficiency (CEE) product list or must meet CEE standards For further information visit wwwcee1org

LED Lamps and Fixtures The integral lamp or fixture must appear on the Energy Star Qualified Products List or the Design Lights Consortium Qualified Products List

bull Energy Star Qualified Fixture Product List httpwwwenergystargov bull Energy Star Qualified Integral LED lamps httpwwwenergystargov bull Design Lights Qualified Product List httpwwwdesignlightsorg

Minimum Watts Reduced Energy efficient fixtureslamps are required to be lower in load than existing fixtureslamps by specified levels the Minimum Watts Reduced Each lighting measure has its own Minimum Watts Reduced that must be met as eligibility requirement These levels are listed in the lighting worksheet ldquoLighting Incentives Tablersquo tab and reproduced below

Linear LED (Tubes) Linear LED lamps must be listed on the Design LightsTM Consortium (DLC) Qualified Products List

Type A LEDs bull Type A LED linear lamps are powered by a fluorescent ballast bull If present existing magnetic ballast must be removed and replaced with a compatible energy- efficient electronic ballast bull DLC Primary Use Requirement ndash DLC-listed equipment must be classified with one of the following Primary Use designations

o Replacement Lamps (Plug and Play) (UL Type A) bull Label must be affixed to the interior of fixture in a prominent location Label should indicate that the fixture has been retrofitted with

TLEDs and that fluorescent lamps should not be installed as replacements

Type B LEDs bull Type B LED tubes are powered by an internal driver bull Existing fluorescent ballast must be removed and fixturersquos incoming power wires are connected directly to the lamp sockets Strict

adherence to installation instructions is critical when rewiring existing fixtures

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 11

bull The LED linear lamps must be delivered as part of a UL 1598C Classified Luminaire Retrofit Kit with instructions explaining the LED linear lamps must be installed on a luminaire that is already UL Listed

bull The retrofitted luminaire must be clearly identified using the label included with the Retrofit Kit indicating that the luminaire has been modified and can no longer operate the originally intended fluorescent lamp(s)

Type C LEDs

bull Type C LED linear lamps are powered by an external driver bull Existing fluorescent ballast must be removed and replaced with a compatible external driver bull DLC Primary Use Requirement ndash DLC-listed equipment must be classified with one of the following Primary Use designations

o 2-lamp External Driver Lamp-Style Retrofit Kits (UL Type C) o 3-lamp External Driver Style Retrofit Kits (UL Type C) o 4-lamp External Driver Lamp-Style Retrofit Kits (UL Type C)

bull Technical specifications (manufacturerrsquos cut sheet) for the driver must be submitted with the application

Permanent Fixture Removal This measure is to be used only in conjunction with lighting retrofits and is intended for spaces that are currently over lit Incentives are paid $010watt reduced only on fixtures removed not on total watts reduced for entire projects Overall net lumen reduction must be achieved in order to qualify for a permanent fixture removal incentive

Example

(20) Existing fixtures at 10000 lumens each = 200000 lumens

(14) Proposed fixtures at 15000 lumens each = 210000 lumens

Since there is not a net reduction in lumens the six fixtures removed would not be eligible for a permanent fixture removal incentive

It is encouraged that spaces meet recommended foot-candle levels as detailed by IESNA Lighting Design Guide A Program Engineer will evaluate lumens reduction based on the type of fixtures removed and the DLC lumens rating of the fixtures installed

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 12

RETROFIT INTERIOR LIGHTING TABLE

Measure Code

Min Measure Name Watts Incentive Unit

Reduced Technical Specifications

CFL Lighting

CFL1A ENERGY STAR Hard-Wired CFL fixture Indoor AccentTrack 20 $250 lamp

Only complete new fixtures or modular hardwired retrofits with hardwired electronic ballasts qualify

CFL ballast must be programmed start or programmed rapid start with a power factor (PF) ge 090 and a total

harmonic distortion (THD) le 20 Screw-in CFLs are not eligible for this incentive

CFL1B ENERGY STAR Hard-Wired CFL fixture Indoor Directional WallCeiling Mount 20 $250 lamp

CFL1C ENERGY STAR Hard-Wired CFL fixture Indoor Omni-Directional WallCeiling Mount 20 $250 lamp

CFL2A ENERGY STAR Hard-Wired CFL fixture Indoor Portable LampTorchiere 20 $1 lamp

CFL2B ENERGY STAR Hard-Wired CFL fixture Indoor Recessed Downlight 20 $1 lamp

CFL2C ENERGY STAR Hard-Wired CFL fixture Indoor Recessed Downlight Retrofit Module 20 $1 lamp

CFL2D ENERGY STAR Hard-Wired CFL fixture Indoor Under CabinetStrip 20 $1 lamp

CFL3A ENERGY STAR Hard-Wired CFL fixture Outdoor Directional WallCeilingGroundPole Mount 30 $3 lamp

CFL3B ENERGY STAR Hard-Wired CFL fixture Outdoor Omni-Directional WallCeilingGroundPole Mount 30 $3 lamp

CFL3C ENERGY STAR Hard-Wired CFL fixture Outdoor Recessed Downlight 30 $3 lamp

CFL3D ENERGY STAR Hard-Wired CFL fixture Outdoor Recessed Downlight Retrofit Module 30 $3 lamp

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 13

Fluorescent Lighting FL1 Interior T5 New Fluorescent Fixture w Electronic Ballast 11 $5 fixture Any T5 is eligible

FL2 T5HO High-Bay Fixture 54 $25 fixture Fixture efficiency must be gt 90

High bay fixtures must be installed at least 15ft above finished floor

FL3 HPT8 High-Bay Fixture 82 $20 fixture Must use High Ballast Factor (gt96) Fixture efficiency must be gt= 85

High bay fixtures must be installed at least 15ft above finished floor

FL4 HPT8 Fixture 20 $5 fixture Must use Low Ballast Factor (lt80)

FL5 RW T8 Lamp - Lamp only 10 $3 lamp Existing T8 fixture re-ballasting to a higher ballast factor are not eligible

HID Measures HID1 Ceramic HID - 25 -39 Watt 95 $13 fixture

Replacing higher wattage HID or High Pressure Sodium or Mercury Vapor

Interior replacements only

HID2 Ceramic HID - 70 Watt 155 $13 fixture HID3 Ceramic HID - 100 Watt 170 $15 fixture HID4 Pulse Start HID - 150 nominal Watts 72 $10 fixture HID5 Pulse Start HID - 350 nominal Watts 100 $13 fixture

HID6 Pulse Start HID - 1000 nominal Watts 400 $15 fixture

Interior LED Fixtures

LED1 ENERGY STAR Integral LED fixture Indoor Recessed Downlight Retrofit Module 38 $7 fixture Retrofit module of existing recessed fixture

LED2 ENERGY STAR Integral LED fixture Indoor Recessed Downlight 38 $7 fixture

New indoor recessed downlight fixture LED3 ENERGY STAR Integral LED fixture Indoor Portable LampTorchiere 30 $7 fixture

LED4 LED AccentTrack Lighting Fixtures 32 $6 head

LED5 LED Low-Bay Fixtures 150 $20 fixture For replacement of HID fixtures mounted le 15 above finished floor

LED6 LED Low-Bay Retrofit Kits 150 $20 fixture

LED8 LED Troffer Fixtures and Retrofit Kits 5 $10 fixture Troffers typically installed in lay-in ceilings 2x2 2x4 configuration

LED9 LED Surface and Suspended Linear Fixtures 25 $10 fixture Examples of LED surface-mounted luminaires include wrap vapor tight and strip fixtures (non-cooler)

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 14

-

Interior LED High Bay Fixtures

LED10A LED High-Bay Fixtures le 20000 LED lumens 150 $50 fixture

High bay fixtures must be installed at least 15ft above finished floor

LED10B LED High-Bay Fixtures gt 20000 LED lumens 225 $75 fixture

LED11A LED High-Bay Retrofit Kits le 20000 LED lumens 150 $50 fixture

LED11B LED High-Bay Retrofit Kits gt20000 LED lumens 225 $75 fixture

LED Parking Garage and Canopy Fixtures

LED12 LED Parking Garage and Canopy Fixtures and Retrofit Kits Outdoor lt= 5000 LED lumens 50 $15 fixture

Fixtures must be physically installed in a parking garage (area where vehicles are physically parked) or

fuel pump canopy Typically represents replacement of le175 W Metal

Halide or equivalent

LED13 LED Parking Garage and Canopy Fixtures and Retrofit Kits Outdoor 5001 - 10000 LED lumens 70 $30 fixture

Typically represents replacement of Metal Halide or equivalent greater than 175W and less than 400W

Product must be installed in a parking garage (area where vehicles are physically parked) or fuel pump

canopy

LED14 LED Parking Garage and Canopy Fixtures and Retrofit Kits Outdoor gt 10000 LED lumens 150 $50 fixture

Typically represents replacement of ge400 W Metal Halide or equivalent

Product must be physically installed in a parking garage (area where vehicles are physically parked) or

fuel pump canopy LED Screw in Lamps

ESLED1 ENERGY STAR Screw-in LED Bulb (Decorative Globe) 14 $5 lamp Lamp with globe shape such as type G

ESLED2 ENERGY STAR Screw-in LED Bulb (Decorative non-globe 14 $5 lamp Lamps with non-globe or candle-like shape such as type B C CA F

ESLED3 ENERGY STAR Screw-in LED Bulb and Low Voltage Mini-Reflector Bulbs (DirectionalReflector) 14 $5 lamp ANSI standard PAR and MR type lamps

ESLED4 ENERGY STAR Screw-in LED Bulb (Standard) 14 $5 lamp Lamp such as A series

ESLED5 ENERGY STAR Screw-in LED Bulb (Standard 3-Way) 14 $5 lamp Lamp such as A series with three light levels

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 15

- -LED Screw in Lamps Smart Bulbs

ESLED6 ENERGY STAR Screw-in LED Bulb (Decorative Globe Smart Bulb) 14 $5 lamp Lamp with globe shape such as type G

ESLED7 ENERGY STAR Screw-in LED Bulb (Decorative non-globe Smart Bulb) 14 $5 lamp Lamps with non-globe or candle-like shape such as

type B C CA F

ESLED8 ENERGY STAR Screw-in LED Bulb (DirectionalReflector Smart Bulb) 14 $5 lamp ANSI standard PAR lamps

ESLED9 ENERGY STAR Screw-in LED Bulb (Standard Smart Bulb) 14 $5 lamp Lamp such as A series

LED Tubes (replacing fluorescent)

TLED1 LED Replacement Lamps (Tubes) 2 5 $250 lamp Refer to Lighting Technical Specifications for requirements DLC Type A B and C are eligible bullType B linear (Interior driver) LEDs have the following installation requirements

bullExisting fluorescent ballast must be removed and fixturersquos incoming power wires are connected directly to the lamp sockets Strict adherence to installation instructions is critical when rewiring existing fixtures bullThe LED linear lamps must be delivered as part of a UL 1598C Classified Luminaire Retrofit Kit with instructions explaining the LED linear lamps must be installed on a luminaire that is already UL Listed bullThe retrofitted luminaire must be clearly identified using the label included with the Retrofit Kit indicating that the luminaire has been modified and can no longer operate the originally intended fluorescent lamp(s)

TLED2 LED Replacement Lamps (Tubes) 4 10 $4 lamp

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 16

LED Exterior Lighting

ELED1 ENERGY STAR Integral LED fixture Outdoor Recessed Downlight Retrofit Module 24 $10 module

ENERGY STAR or DLC Qualified fixtures ELED2 ENERGY STAR Integral LED fixture Outdoor Recessed

Downlight 24 $10 fixture

ELED3 LED Outdoor Flood Light Fixtures lt= 5000 LED lumens 50 $10 fixture Typically represents replacement of le175 W Metal Halide or equivalent Fixtures must be DLC qualified

ELED4 LED Outdoor Flood Light Fixtures gt 5000 LED lumens 70 $15 fixture Typically represents replacement of Metal Halide or equivalent greater than 175W Fixtures must be DLC qualified

ELED5 LED PoleArm Mounted Parking and Roadway Fixtures and Retrofit Kits lt= 5000 LED lumens 50 $25 fixture Typically represents replacement of le175 W Metal

Halide or equivalent Product must be DLC qualified

ELED6 LED PoleArm Mounted Parking and Roadway Fixtures and Retrofit Kits Outdoor gt 10000 LED lumens 150 $75 fixture

Typically represents replacement of Metal Halide or equivalent greater than 400W Product must be DLC

listed

ELED7 LED PoleArm Mounted Parking and Roadway Fixtures and Retrofit Kits Outdoor 5001 - 10000 LED lumens 70 $50 fixture

Typically represents replacement of Metal Halide or equivalent greater than 175W and less than 400W

Product must be DLC listed

ELED8 LED Wall Mount Fixtures and Retrofit Kits Outdoor lt= 5000 LED lumens 50 $25 fixture Typically represents replacement of le175 W Metal

Halide or equivalent Product must be DLC qualified

ELED9 LED Wall Mount Fixtures and Retrofit Kits Outdoor gt 5000 LED lumens 70 $50 fixture

Typically represents replacement of Metal Halide or equivalent greater than 175W Product must be DLC

qualified Permanent Fixture Removal

PFRA Indoor Permanent Fixture Removal combined with lighting retrofit na $010 watt removed Incentive only valid when units = ldquofixturerdquo in this table

Incentive is only offered when net lumens are reduced PFRB Outdoor Permanent Fixture Removal combined with lighting retrofit na $010 watt removed

Other LED Lighting LEDEXIT LED Exit Sign

na

$2 sign Replacing Incandescent or Fluorescent

SIGN1A Indoor LED Channel Signage $8 letter

Replacing Neon SIGN1B Outdoor LED Channel Signage $8 letter

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 17

Lighting Controls

CTL Unitary Sensor Controls

na

$1500 sensor

Passive infrared ultrasonic detectors are eligible Includes daylighting controls and all occupancy controls

Controls can be onoff stepped or continuous (dimming) Daylight sensor controls are required to be commissioned in order to ensure proper sensor calibration and energy savings

Minimum of 30 watts controlled per control

CLC Interior Central Lighting Controls $00175

square foot of area

under control

Automated central lighting control systems with override capabilities

This measure includes centrally-controlled time clocks wireless on off switches bi level switches computer based

controls pre-set scene selection dimmable ballasts and on-off dimmer switches for non-personal tuning

Floor plan must be submitted verifying square footage

DAYOCC Controls Combination - Daylighting and Occupancy Fixture Mounted $1500 sensor Minimum of 30 watts controlled per control

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 18

LED Traffic SignalsThis measure applies to the early replacement of existing incandescent traffic lights and pedestrian signals with LEDs New LED traffic signals must comply with ENERGY STAR requirements which can be found at httpswwwenergystargoviapartnersproduct_specseligibilitytraffic_eligpdf98bfshy1786

LED Traffic Signals Incentive Table

Round Traffic Signals 8 Red

Incentive per Signal

$15

8 Yellow 8 Green 12 Red

12 Yellow 12 Green

Turn Arrow Signals

8 Red

$13

8 Yellow 8 Green 12 Red

12 Yellow 12 Green

Pedestrian Signals

9 Pedestrian Only

$13

12 Hand Only 12 Pedestrian Only 12 Countdown Only

12 Pedestrian and Hand Overlay 16 Pedestrian and Hand Side by

Side 16 Pedestrian and Hand Overlay

16 Hand and Countdown Side-by-Side

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 19

Lighting Controls that Exceed Code Requirements

New Construction Lighting SpecificationsUnder the Lighting Power Density Approach the lighting power installed is compared with the lighting power allowed by code Incentives are available for systems where the installed lighting power is lower than the code-allowed power by at least 10 Savings are based on the Lighting Power Density (LPD) calculated on a watts per square foot basis Incentives will be paid only on the area of the building where the lighting installation is complete and is ready for occupancy If a portion of a building is not built-out such that the lighting in an area is not complete and ready for occupancy then that portion is not eligible for an incentive Baseline lighting power density is based on ASHRAE 901- 2007 Either the Space-by-Space or Building Area method may be used to calculate the LPD for the purposes of the incentive

Required Documentation bull Lighting Worksheet bull COMcheck Interior Lighting Report or equivalent analysis demonstrating space-byshy

space or building area calculations bull Reflected ceiling plans and electrical plan sheets showing lighting fixture layout bull Lighting fixture schedule sheet including fixture counts bull Fixture submittal or specification sheets showing model number and rated fixture wattage bull Architectural floor plans displaying floor area affected by proposed lighting installation

New Construction Lighting Incentives Table Lighting Wattssq ft

Improvement over of Code Incentive

gt= 10 and lt 20 $0035sq gt= 20 and lt 30 $007sq ft gt= 30 and lt 40 $0105sq

gt= 40 $021 sq ft

Incentives will be paid on a ($005kWh) custom basis Please contact Program Staff for eligibility of lighting controls for New Construction projects

Interior Occupancy Sensors Incentives are offered for occupancy-based controls in areas where they are not required by code Passive infrared ultrasonic detectors and fixture-integrated sensors or sensors with a combination sensor are eligible All sensors must be hard-wired and control interior lighting fixtures The incentive is per Watt controlled An inventory of the controlled fixtures and their wattage must be provided for each sensor with the Final Application

Daylight Dimming System Incentives are offered for daylight sensor controls in spaces with suitable available ambient light for at least part of the day Light may be through skylights clerestories windows or ldquolight tubesrdquo The controls can be onoff stepped or continuous dimming The onoff controller should turn off artificial lighting when the interior illuminance meets the desired indoor lighting level The stepped controller generally dims the artificial lighting 50 when the interior illuminance levels reach 50 of the desired lighting levels Continuous or dimming controllers dim artificial lighting proportionally to the available ambient light All types of daylight sensor controls are required to be commissioned in order to ensure proper sensor calibration and energy savings

Required Documentation bull Cut sheets or submittals of lighting control systems Reflected ceiling plans or schedule

showing which fixtures are controlled by lighting controls

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 20

New Construction Lighting Power Density CodeRequirements ndash Space by Space Method

Building Specific Space Types LPD (Wft2) Building Specific Space Types LPD (Wft2)

GymnasiumExercise Center AutomotivemdashServiceRepair 07

Playing Area 14 Manufacturing

Exercise Area 09 Low (lt25 ft Floor to Ceiling Height) 12

CourthousePolice StationPenitentiary High (gt25 ft Floor to Ceiling Height) 17

Courtroom 19 Detailed Manufacturing 21

Confinement Cells 09 Equipment Room 12

Judges Chambers 13 Control Room 05

Fire Stations HotelMotel Guest Rooms 11 Fire Station Engine Room 08 DormitorymdashLiving Quarters 11

Sleeping Quarters 03 Museum

Post Office-Sorting Area 12 General Exhibition 10 Convention Center-Exhibit Space 13 Restoration 17

Library BankOfficemdashBanking Activity Area 15 Card File and Cataloging 11 Religious Buildings

Stacks 17 Worship Pulpit Choir 24

Reading Area 12 Fellowship Hall 09

Hospital Retail

Emergency 27 Sales Area [For accent lighting see 93121(c)] 17

Recovery 08 Mall Concourse 17

Nurse Station 10 Sports Arena

ExamTreatment 15 Ring Sports Area 27

Pharmacy 12 Court Sports Area 23

Patient Room 07 Indoor Playing Field Area 14

Operating Room 22 Warehouse

Nursery 06 Fine Material Storage 14

Medical Supply 14 MediumBulky Material Storage 09

Physical Therapy 09 Parking GaragemdashGarage Area 02

Radiology 04 Transportation

LaundrymdashWashing 06 AirportmdashConcourse 06

AirTrainBusmdashBaggage Area 10

TerminalmdashTicket Counter 15

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 21

New Construction Lighting Power Density CodeRequirements ndash Building Area Method

Building Area Type 221 LPD (Wft2)

Automotive facility 09

Convention center 12

Courthouse 12

Dining bar loungeleisure 13

Dining cafeteriafast food 14

Dining family 16

Dormitory 1

Exercise center 1

Gymnasium 11

Health-care clinic 1

Hospital 12

Hotel 1

Library 13

Manufacturing facility 13

Motel 1

Motion picture theater 12

Building Area Type LPD (Wft2)

Multifamily 07

Museum 11

Office 1

Parking garage 03

Penitentiary 1

Performing arts theater 16

Policefire station 1

Post office 11

Religious building 13

Retail 15

Schooluniversity 12

Sports arena 11

Town hall 11

Transportation 1

Warehouse 08

Workshop 14

221 In cases where both a common space type and a building specific type are listed the building specific space type shall apply

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 22

Exterior New Construction LightingExterior New Construction savings over code lighting power density will be incentivized using custom lighting measure at $005kWh rate Participants must submit exterior lighting plans Submittals COMCHECK REPORT and lighting schedule for exterior lighting Savings are calculated from the LPD (Wsq ft) indicated below Additional information may be required based on the building exterior type and space description indicated below To contribute to incentive LEDs must satisfy program requirements for DLC Energy Star or equivalent listing

Required Documentation bull COMcheck Interior Lighting Report or equivalent analysis demonstrating space-by-space or

building area calculations bull Drawings showing lighting fixture layout bull Lighting fixture schedule sheet including fixture counts bull Fixture submittal or specification sheets showing model number and rated fixture wattage

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 23

Building Exterior Space Description LPD

Unco erect Pariki Ilg Area Parlurng ots arnd Drives 0 15 WfW

B i ing Grournds W al 1Yays lless Hlan 11] e 10 Wltirneru- 00

W a Nays 10 middot de or greater 112 W

Plaza a reas

Spec rest re areas

Stainh1ays 1ow 2

B i ing 8ntrames and Exits Ma efilbies m wr near foot of door width

Other doors 2o w 1r ear foot of door width

Ctmqpies and Overhimgs Free starndillg and a ched tmd 12s w m2 m bullerhangs

0 door sales Op en areas (ind udi Ilg ve id e sales 05 W lo )

street frontage far vehicle sales lots 21] W linear toot in addi middot on to open are-0bullmiddot lo~nce

B i ing facades 0 2 W tfl2 middot or eacil illumirnated N311 or surface

o r 5 0 Wllinear root fo r eac h m n inated N3l1 o r

surface length

Automated te lle r rnachmiddot es a lld 210 W per loca tion plus 91] night deposito liies W 1pernddiliorml A I middot per

1oca middot om

Eirltrances and gatehouse inspecliion 125 W ffl2 o middot uncovered slatiaBS a goo~ ed acir ies area

Load ing are-0s or law enforcement 0 5 W 2 of u rnco1bullered area fire ambu rnce and otiher emergency service ibullehmiddotctes

Drive-through w indOWs a taslrood 400 W per drive-Hlrough restaurants

Parking near 24 -h our retail 80111 W per main entry entmn ces

HVAC Equipment Air-Source Air Conditioners and Air-Source Heat Pumps New unitary air conditioning units or air source heat pumps that meet or exceed the qualifying cooling efficiency shown in the HVAC Incentives Worksheet are eligible for an incentive They can be either split systems or single package units The efficiency of split systems is based on an ARI reference number All packaged and split system cooling equipment must meet Air Conditioning and Refrigeration Institute (ARI) standards (210240 320 or 340360) be UL listed use a minimum ozone-depleting refrigerant (eg HCFC or HFC) All required efficiencies are based on the Consortium for Energy Efficiency (CEE) high-efficiency commercial air conditioning and heat pump specifications (wwwcee1org) A manufacturerrsquos specification sheet indicating the system efficiency must accompany the application Disposal of the existing unit

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 24

must comply with local codes and ordinances

Package Terminal Systems (Replacements) Package terminal air conditioners and packaged terminal heat pumps are through-the-wall self-contained units that are 2 tons (24000 Btuh) or less All EER values must be rated at 95degF outdoor dry-bulb temperature

Ductless Mini-Split Heat Pump lt54 Tons Incentives are offered for Ductless Mini-Split Heat Pump lt54 Tons with SEER rating greater than or equal to 120 and EER greater than or equal to 145 and HSPF greater than or equal to 90

Geothermal Heat Pump Geothermal equipment is a high-efficiency groundwater source water source or ground source heat pump system that meets or exceeds the energy efficiency requirements shown in the tables below These measures do not apply to heat pump systems coupled with non-heat pump systems such as chillers rooftop AC units boilers or cooling towers which must be filed as custom measures All HVAC applications other than comfort cooling and heating such as process cooling must also be applied for as custom measures

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 25

HVAC Heating Qualifying Incentive

Equipment Type and Cooling Capacity Cooling Qualifying Efficiency ($ per cooling Measure Code Efficiency

ton)

Air Cooled Air Conditioner

H01 lt 54 tons (lt 65000 Btuhr) 15 SEER NA $22

H02 lt 54 and lt 11 25 tons

125 IEER $22 (lt 65 000 Btuh and lt 135 000 Btuhr) NA

H03 lt11 25 and lt 20 tons

123 IEER NA $22 (lt 135000 Btuh and lt 240000 Btuhr)

H04 lt 20 and lt 6333 tons (~

11 1 IEER NA $22 240000 Btuh and lt 760000 Btuhr)

HOS ~ 6333 Ions (~ 760000 Btuhr) 103 IEER NA $22

Air Cooled Heat Pumps

H06 lt 54 tons (lt 65000 Btuhr) 143 SEER 87 HSPF $30

H07 lt 54 and lt 11 25 tons

123 IEER 3 3 COP $30 (lt 65000 Btuh and lt 135000 Btuhr)

HOS lt11 25 and lt 20 tons

1U IEER 3 2 COP $30 (lt 135000 Btuh and lt 240000 Btuhr)

H09 lt 2000 tons (240000 Btuhr) 105 IEER 3 2 COP $30

Packaged Terminal Systems (PTAC and PTHP) (PTHP only)

H10 lt 8000 Btuhr (lt066 tons) 11 8 EER 33 $17

H11 ~8000 and lt10500 Btuhr (~066 and lt 0875 tons) 11 4 EER 32 $17

H12 gt10500 Btuhr ( 875 tons) 107 EER 31 $17

H22 lt 54 tons (lt 65000 Btuhr) 121 EER 12 3 IEER NA $22

lt 54 and lt 11 25 tons 121 EER 12 3 IEER $22 H23

(lt 65000 Btuh and lt 135000 Btuhr) NA

H24 lt11 25 and lt 20 tons

120 EER 12 2 IEER $22 (lt 135000 Btuh and lt 240000 Btuhr) NA

H25 lt20 and lt 633 tons

119 EER 12 2 IEER $22 (lt 240000 Btuh and lt 760000 Btuhr) NA

H26 ~ 633 tons( lt760000 Btuhr) 110 EER 11 1 IEER NA

$22

HVAC Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 26

Other HVAC EquipmentHotel Guest Room Occupancy Sensor Incentives are offered for occupancy-based controls that control electric air conditioning air source heat pumps and or electric heating units for individual hotel rooms Systems with nonshyelectric heat are not eligible Sensors must be controlled by automatic occupancy detectors or a key-card system and the default setting for controlled units differ by at least 5 degrees (or shut the unit fan and heating or cooling off completely) from the operating set point during unshyoccupied periods The control system may also be tied into other electric loads such as lighting and plug loads to shut them off when occupancy is not sensed The incentive is per room Replacement or upgrades of existing occupancy-based controls are not eligible as a prescriptive incentive

Economizer Integrated Dual Enthalpy Economizer ControlsThis measure is targeted to non-residential establishments whose HVAC equipment is not equipped with a functional economizer

Circulation Fan High-Volume Low-SpeedFans must be greater than 16 feet in diameter and have variable speed control

ECM Circulation Fan This measure is targeted to non-residential customers whose air handling equipment currently uses a SP or PSC fan motor rather than an ECM This measure applies only to circulating fan motors of 1 HP or less Above 1 HP motors are governed by NEMA standards and would see little to no efficiency benefit by adding an ECM The targeted fan can supply heating or cooling only or both heating and cooling

ECM Circulation Pump This measure is targeted for replacement of a shaded pole or permanent split capacitor pump or motor with an electronically commutated pump or motor le75 HP

Retrocomissioning Cooling Systems Confined to chiller plant andor isolated packaged units For reservation must contain proposal with defined scope at equipment level that demonstrates energy savings For final approval required final commissioning report including raw data (TAB reports) demonstrating actual scope

This prescriptive measure can be used for facilities with maximum cooling demand less than 1687 tons Larger systems require the use of custom HVAC measure

Retrocomissioning Whole Building Covers all relevant major mechanical systems such as chiller plant air side systems compressed air andor process systems For reservation must contain proposal with defined scope at equipment level that demonstrates energy savings For final approval required final commissioning report including raw data (TAB reports) demonstrating actual scope

This prescriptive measure can be used for facilities less than 404858 square feet Larger facilities require the use of custom HVAC measure

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 27

Energy Management System For installing a web-based building automation system in existing buildings that currently have no digital automated HVAC controls or have outdated pneumatic control systems with inoperable time control functions Existing HVAC control systems must not have time-of-day scheduling Upgrading obsolete EMS HVAC system with inoperable time clock functions will be reviewed on a case-by-case basis for incentive eligibility This incentive cannot be combined with incentives for programmable thermostats or setback-setup controls Must include the controls strategy and a scaled floor-plan with controlled areas highlighted HVAC BAS systems must be new and include bull Central time clock control bull Web-based interface with PC-based controls and graphic bull Building performance Tracking bull Open-protocol architecture controls system shall consist of either LonTalk (ANSICEA 7091) or BACNet (ASHRAE ANSI 135) protocol being used between all controlled and controlling devices and every node on the network bull Minimum setback period must exceed 2200 hours per year bull A minimum setback space temperature of at least 10degF when heating and 5degF when cooling bull Ability to adjust schedules and settings remotely over the internet bull Report generation describing energy and operating trends

This prescriptive measure can be used for facilities with maximum cooling demand less than 456 tons Larger systems require the use of custom HVAC measure

Demand Controlled Ventilation New ventilation controls must use carbon dioxide levels to measure occupancy and modify the percentage of outside air based on occupancy levels Only buildings with space heating and cooling requirements are eligible Conditioned spaces must be kept between 65ordmF and 75ordmF during occupied operating hours Carbon dioxide sensors must be installed in conjunction with fully functioning motor operated outside air dampers Dual temperature air-side economizers with zone-level CO2 sensors for rooftop units are eligible

This prescriptive measure can be used for facilities with maximum cooling demand less than 2210 tons Larger systems require the use of custom HVAC measure

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 28

Other HVAC Measures- consult project manual for eligibility specifications HVAC

Measure Incentive Unit Quantity Incentive

Measure Code er Unit

H1 8 Hotel Guest Room Occupancy Sensor Room $20

H1 9 Economizer Integrated Dual Enthalpy Economizer Controls Ton $1 5

H20 Circulation Fan High-Volume Low-Speed Unit $30

H21 ECM Circulation Fan Fan $1 5

H27 ECM Circulation Pump Pump $50

H28 Retrocommissioning Cooling Systems

Ton $750

H29 Retrocommissioning Whole Buidling

Square Foot $010

H29 Energy Management System Ton $2500

H30 Demand Controlled Ventilation Ton $2500

Other HVAC Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 29

Unitary HVAC Chillers

Air-Cooled Chillers Water Cooled Positive Displacement Reciprocating Chillers and Water Cooled Centrifugal Chillers Chiller applications including existing multiple chiller configurations (including redundant or lsquostand-byrsquo chillers) existing chillers serving multiple load groups and chillers in industrial applications are defined as non-standard applications and must follow a site-specific custom protocol $005kWh) rate

Incentives are offered for chillers with an IPLV value (expressed in kW per ton) that is less than or equal to the qualifying efficiency shown in the table below The chiller efficiency rating must be based on ARI Standard 550590-2003 for IPLV conditions The chillers must meet ARI standards 550590-2003 be UL listed and use a minimum ozone-depleting refrigerant (eg HCFC or HFC) The ARI net capacity value should be used to determine the chiller tons A manufacturerrsquos specification sheet with the rated kWton-IPLV or COP-IPLV must accompany the application along with the four point performance data that is the basis for the IPLV The application must include a certification that the chiller is appropriately sized for site design load conditions

Chillers must satisfy efficiency requirements for both full load and IPLV efficiencies for either Path A or Path B The table shows the minimum efficiency ratings to qualify for the prescriptive incentive which must be consistent with the expected operating conditions of the efficient chiller For example if the efficient chiller satisfies Path A and generally performs at part load the appropriate baseline chiller efficiency is the IPLV value under Path A If the efficient chiller satisfies Path B and generally performs at full load the appropriate baseline chiller efficiency is the full load value under Path B Generally chillers operating above 70 percent load for a majority (50 or more) of operating hours should use Path A and chillers below 70 load for the majority of operating hours should use Path B

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 30

C3 lt 75 tons

C4 75 tons and lt 150 tons

cs ~ 150 tons and lt 300 tons C6 ~ 300 tons

Water Cooled Centrifugal Chillers C7 lt 300 tons CB ~ 300 tons and lt 600 tons

C9 ~ 600 tons

Path A

Qualifying Full Load Efficiency

Qualifying IPLV Efficiency

Path B

Qualifying Full Load Efficiency

Qualifying IPLV Efficiency

0780 kWton 0567 kWton 0800 kWton 0540 kWton

0775 kWton 0554 kWton 0790 kWton 0527 kWton

0680 kWton 0522 kWton 0718 kWton 0486 kWton 0620 kWton 0486 kWton 0639 kWton 0441 kWton

0634 kWton 0536 kWton 0639 kWton 0405 kWton 0576 kWton 0494 kWton 0600 kWton 0360 kWton

0570 kWton 0494 kWton 0590 kWton 0360 kWton

I

Incentive ($ton)

$17

$17

Unitary Chiller Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 31

Refrigeration

Anti-Sweat Heater Controls Incentives are offered for devices that sense the relative humidity in the air outside of the display case and cycles or turns off the glass door (if applicable) and frame anti-sweat heaters when the ambient dew point is below a preset set point Technologies that can turn off anti-sweat heaters based on sensing condensation (on the inner glass pane) also qualify Incentive is based on the number of doors

Evaporator Fan Controls This measure is for the installation of controls in medium temperature walk-in coolers The controller reduces airflow of the evaporator fans when there is no refrigerant flow The measure must control a minimum of 120 HP where fans operate continuously at full speed The measure also must reduce fan motor power by at least 75 during the off cycle This measure is not applicable if any of the following conditions apply 1) Compressor runs all the time with high duty cycle 2) Evaporator fan does not run at full speed all the time 3) Evaporator fan motor runs on poly-phase power 4) Evaporator fan motor is not shaded-pole or permanent split capacitor (PSC) 5) Evaporator fan does not use off-cycle or time-off defrost

Floating Head Pressure Controls Controls must vary head pressure to adjust condensing temperatures in relation to outdoor air temperature Must replace existing constant pressure or manually controlled systems to achieve reduced head pressure in order to maintain a minimum saturated condensing temperature of 70 degF or a 20 degF variance below design heat pressure during mild weather conditions Compressor size must be at least 5 HP

Automatic Door Closers for Walk-In Coolers and Freezers The auto-closer should be applied to the main insulated opaque door(s) of a walk-in cooler or freezer The auto-closer must be able to firmly close that door when it is within one inch of full closure This must be a newly installed automatic door closer replacements on previously installed door closers are not eligible for an incentive

EC Motor for Walk-inReach-in Refrigerated cases or Freezer cases Incentives are offered for replacement of an existing standard-efficiency shaded-pole or permanent split capacitor evaporator fan motor in refrigerated display cases or fan coil in walk-ins The replacement unit must be an Electronically Commutated Motor (ECM) This measure cannot be used in conjunction with the Evaporator Fan Controller measure

ENERGY STAR Solid Door Freezer and Glass Door Freezer and Refrigerators Incentives are offered for replacement of existing self-contained refrigerators and freezers with units that are ENERGY STARreg listed Only units with built-in refrigeration systems are qualified Units with remote refrigeration systems or units do not qualify Customers must provide proof that the appliance meets the CEE or ENERGY STAR efficiency specifications using ASHRAE Standard 72-2005 (38degF plusmn 2degF) Incentive is per unit

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 32

Refrigeration Suction Pipe Insulation 1 Must insulate bare refrigeration suction lines of 1 58 inches in diameter or less on existing equipment only 2 Cooler lines require frac34 inch of flexible closed-cell nitrite rubber or an equivalent insulation 3 Freezer lines require 1-inch of flexible closed-cell nitrite rubber or an equivalent insulation 4 Insulation exposed to the outdoors must be protected from the weather (ie jacketed with a medium-gauge aluminum jacket)

Night Cover 1 Must install a cover on an existing open refrigerated display case to decrease its cooling load during off hours 2 The equipment manufacturer must not object to the use of night covers for the existing display case model 3 This rebate is based on the linear footage of the installed 4 The cover must be applied for a period of at least six hours

Strip Curtain on Walk-In CoolerFreezer 1 New strip curtains or plastic swinging doors must be installed on doorways of refrigerated spaces (conditioned to less than 50deg F) 2 Rebate is based on the linear footage of the doorway that the strip curtains are being installed in 3 Opening between the strip curtain and bottom of doorway must be no larger than 1 inch 4 Strips must have an overlay greater than 1 inch

Evaporator Coil Defrost Control 1The current system must include an operating electric defrost system with a functional electroshymechanical time clock 2 Evaporator coil temperature and pressure must be monitored by controller in order to determine optimal defrost cycles 3 New intelligent control systems to control the defrost systems will typically replace timed- defrost controls

Variable Speed Refrigeration Compressor This measure VSD control for refrigeration systems and its eligibility targets applies to retrofit construction in the commercial and industrial building sectors it is most applicable to grocery stores or food processing applications with refrigeration systems This protocol is for a VSD control system replacing a slide valve control system

Add Doors to Open Refrigerated Cases The eligible retrofit equipment is either no sweat doors or doors with anti-sweat heaters If a lighting retrofit is included with the new doors it must consume the same amount of energy or less energy than the old lighting Upgrades to lighting or other system components should be processed separately Horizontal cases are not eligible and should be processed as custom

Door Gaskets PECO Smart Ideas For Your Business CampI Program Application Manual

Q1 2017 pg 33

This measure is applicable to commercial refrigeration and applies to the replacement of worn-out gaskets with new better-fitting gaskets Applicable gaskets include those located on the doors of walk-in andor reach-in coolers and freezers This protocol applies to the main doors of both low temperature (ldquofreezerrdquo ndash below 32 degF) and medium temperature (ldquocoolerrdquo ndash above 32 degF) walk-ins

Zero Energy Doors For this measure a no-heatlow-heat clear glass door must be installed on an upright display case It is limited to door heights of 57 inches or more Doors must have either heat reflective treated glass be gas filled or both This measure applies to low temperature cases onlymdashthose with a case temperature below 0degF Doors must have 3 or more panes Total door rail glass and frame heater amperage ( 120 volt) cannot exceed 039413 amps per door for low temperature display cases Rebate is based on the door width (not including case frame)

Air Cooled Refrigeration Condenser Approach temperature lt8F for low temperature loads lt13F for medium temperature loads

Oversized Condenser with VFD New standalone condenser must no more than 150 larger than load

Case Light Occupancy Controls Acceptable for freezer or refrigerated cases as well as open cases or cases with doors

LED Open Case Lighting For replacing open case T8 or T12 fluorescent fixtures with DLC listed LEDs on refrigerators coolers and freezers

LED Enclosed Case Lighting Refrigerated LED case lighting with or without motion sensors on enclosed refrigerated vertical displays The baseline equipment is assumed to be cases with uncontrolled T8 or T12 linear fluorescent lamps

LED Enclosed Case Lighting Freezer LED case lighting with or without motion sensors on enclosed freezer vertical displays The baseline equipment is assumed to be cases with uncontrolled T8 or T12 linear fluorescent lamps

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 34

Refrigeration Measures Ref Measure

Measure Incentive Unit IncentiveUnit Code R01 Anti-Sweat Heater Controls Door $30

R02 Evaporator Fan Controls Controller $50

R03 Floating-head Pressure Controls HP $20

R04 Automatic Door Closers fo r Walk-in Coolers Door $75

R05 Automatic Door Closers fo r Walk-in Freezers Door $75

R06 Evaporator Fan EC Motor fo r Reach- in Cases Motor $35

RO Evaporator Fan EC Motor fo r Walk-in Cases Motor $50

R08 ENERGY STARreg Glass Door Freezer lt15 Cu Ft Unit $100

R09 ENERGY STARreg Glass Door Freezer 15- 49 Cu Ft Unit $125

R10 ENERGY STARreg Glass Door Freezer ~ 50 Cu Ft Unit $145

R11 ENERGY STARreg Solid Door Freezer Unit $75

R12 ENERGY STARreg Glass Door Refrigerator lt50 Cu Ft Unit $30

R13 ENERGY STARreg Glass Door Refrigerator gt= 50 Cu Ft Unit $50

K14 t NtKGY ~ I AKreg ~Olld Uoor Ketngerator $ OU Cu t-t Unit $~0

R15 Suction Pipe Insulation Walk-in Coolers Linear Foot $050

R16 Suction Pipe Insulation Walk in Freezers Linear Foot $075

R17 Night Cover Linear Foot $800

R18 Strip Curtains on Walk-in Cooler Linear Foot $250

R19 Evaporator Coil Defrost Control Controller $7500

R20 Variable Speed Refrigeration Compressor Compressor $85

R21 Add Doors to Open Refrigerated Cases Door $55

R22 Door Gaskets Door $250

R23 Zero Energy Doors Door $50

R24 A ir Cooled Refrigeration Condenser Ton $10

R25 Oversized Condenser with VFD Ton $10

R26 Case Light Occupancy Controls Door $8

R27 LED Open Cose Lighting Cose $10

R28 LED Enclosed Case Lighting Refrigerated Door $30

R30 LED Enclosed Case Lighting Freezer Door $30

Refrigeration Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 35

Food Service Beverage and Snack Machine Controls Incentives are offered for refrigerated vending machines that contain non-perishable bottled and canned beverages Controller for both types of systems must include a passive infrared occupancy sensor to turn off fluorescent lights and other energized machine systems when the surrounding area is unoccupied for 15 minutes or longer For the refrigerated machines the control logic may include periodic power up at 2-hour intervals or longer to maintain product temperature and provide compressor protection

ENERGY STARreg Refrigerated Beverage Vending Machines Incentives are offered for ENERGY STARreg beverage vending machines Qualifying machines can be found at httpswwwenergystargovproductsothervending_machines

ENERGY STARreg Electric Steam Cooker This measure applies to the installation of electric ENERGY STAR steam cookers as either a new item or replacement for an existing unit Gas steam cookers are not eligible The steam cookers must meet minimum ENERGY STAR efficiency requirements A qualifying steam cooker must meet a minimum cooking efficiency of 50 percent and meet idle energy rates specified by pan capacity

ENERGY STARreg Electric Combination Oven This measure applies to electric ovens capable of handling single 12 x 20 x 25 pan per rack

ENERGY STARreg Commercial Convection Oven The oven must meet or exceed heavy load potato cooking energy efficiency of greater than 70 utilizing ASTM Standard F149 Applies only to electric ovens

ENERGY STARreg Commercial Fryers The commercial fryer must have a tested heavy load (French fry for large vats) cooking energy efficiency of greater than 80 utilizing American Society for Testing and Materials (ASTM) Standard F1361 for commercial fryers and ASTM Standard F2144 for large vat fryers Multiple vat configurations are paid per qualifying vat ENERGY STAR maintains a list of qualifying products and specifications at httpwwwenergystargov

ENERGY STARreg Commercial Hot Holding Cabinet Energy STAR rating electric

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 36

Food Service amp Other Measures FoodOther

Measure Incentive Unit Incentive

Measure Code Unit

F01 Beverage Machine Controls Unit $25

F02 Snack Machine Controls Unit $20

F03 ENERGY STARreg Refrigerated Beverage Vending Machir Unit $125

F04 ENERGY STARreg Commerc ial Steam Cooker Unit $200

F05 ENERGY STARreg Electric Combination Oven Unit $200

F06 ENERGY STARreg Commercial Electric Convection Oven Unit $150

F07 ENERGY STARreg Commerc ial Fryers Unit $100

F08 ENERGY STARregCommerc ial Hot Holding Cabinet Unit $200

Food Service Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 37

Motors and Variable Frequency DrivesEarly Replacement Motors For constant speed and uniformly loaded motors this measure applies to the replacement of old motors with new energy efficient motors of the same rated horsepower Old motors must be less than 15 years Replacements where the old motor and new motor have different horsepower ratings are considered custom measures Motors with variable speeds variable loading or industrial-specific applications are also considered custom measures

Motors Incentive Table Motors

Measure Code

HP Incentive per Motor

M01 15 - 10 $40 M02 11 - 50 $100 M03 51-100 $150 M04 gt100 $300

Only VFDs on unitary systems are eligible Non-unitary systems must be submitted as a custom measure Soft start motors are not eligible

Variable Frequency Drives on HVAC Fan Applications Incentives are offered for installing VFDs on existing HVAC fans that do not have pre-existing VFDs This measure applies to HVAC supply and return fans only All other fans including cooling tower fans must be submitted as custom measures Manually fixed speed settings on HVAC fans must be submitted via custom application The VFD must control motor speed automatically in response to pressure flow temperature or other variable signal The installation of a VSD must accompany the permanent removal or disabling of any throttling devices such as inlet vanes bypass dampers and throttling valves etc The incentive is offered per controlled HP

Variable Frequency Drives on Pump Applications Incentives are offered for installing VFDs on existing chilled water pumps and heating hot water pumps that do not have existing VFDs This measure applies to chilled water pumps and heating hot water pumps only All other pumps must be submitted as custom measures Manually fixed speed settings on pumps must be submitted via custom application The VFD must control motor speed automatically in response to pressure flow temperature or other variable signal The installation of a VSD must accompany the permanent removal or disabling of any throttling devices such as throttling valves The incentive is offered per controlled HP

Variable Speed Control for Kitchen Exhaust Hoods The measure consists of installing a new VSD in conjunction with a sensor control system that varies the exhaust rate of kitchen ventilation (exhaust andor makeup air fans) based on the heat and effluent output from the cooking appliances (ie the more heat and smokevapors generated the more ventilation needed) This involves installing a temperature sensor in the hood exhaust collar andor an optic sensor on the end of the hood that senses cooking conditions and allows the system to automatically vary the rate of exhaust to match requirements by adjusting the fan speed accordingly

Variable Speed Drives for Process or Other Equipment VFD must be used in conjunction with a process (non HVAC) application To qualify for this incentive the driven equipment must operate at least 2000 hours per year Redundant or back- up units do not qualify VFDs replacing existing VFDs do not qualify The VFD must control motor

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 38

speed automatically in response to pressure flow temperature or other variable signal VFDs installed as ldquosoft startrdquo without automatic manual closed loop speed control do not qualify The installation of a VFD must accompany the permanent removal or disabling of any throttling devices such as throttling valves The incentive is per controlled HP and only applies to controlled motors less than 50 HP

VSDVFD Incentives Table VFD

Measure Code

Measure Unit Incentive per Unit

Fan Application

V01 VFD on HVAC Fan HP $25 Pump Application

Variable Speed Control for Kitchen Exhaust Hoods

Variable Speed Drives for Process or Other Equipment

V02 VFD on Chilled Water Pumps HP $25 V03 VFD on Heating Hot Water Pumps HP $25

V04 Kitchen Exhaust Fan Retrofit Hood HP $500

V05 Process Motor lt 50 HP HP $50

Domestic Hot Water Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater This measure documents the energy savings attributed to converting from a standard electric water heater to an ENERGY STAR natural gaspropane-fired water heater or a standard oil-fired water heater with an Energy Factor of 0585

Heat Pump Water Heater This includes heat pump water heaters with energy factors meeting ENERGY STAR criteria The measure described here involves a direct retrofit of a resistive electric water heater with a heat pump water heater It does not cover systems where the heat pump is a pre-heater or is combined with other water heating sources More complicated installations can be treated as custom projects

Low Flow Pre-Rinse Spray Valve This measure applies to efficient low flow pre-rinse sprayers in grocery and food service applications The most likely areas of application are kitchens in restaurants and hotels Only premises with electric water heating may qualify for this incentive In addition the replacement pre-rinse spray nozzle must use less than 16 gallons per minute with a cleanability performance of 26 seconds per plate or less Low flow pre-rinse sprayers reduce hot water usage and save energy associated with water heating

Domestic Hot Water Incentive Table

Measure Code Measure Unit Retrofit Incentive per

Unit

W01 Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater Unit $100

W02 Heat Pump Water Heater Unit $100 W03 Low-Flow Pre-Rinse Spray Valve Valve $17

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 39

Compressed Air SystemsNo-loss Condensate Drain No-loss Condensate Drains are controlled by a sensor that monitors the level of condensate and only open when there is a need to drain condensate They close before compressed air is allowed to escape This measure is targeted to non-residential customers whose equipment is a timed drain that operates on a pre-set schedule Acceptable baseline conditions are compressed air systems with standard condensate drains operated by a solenoid and timer

Air-Entraining air nozzle This measure is targeted to non-residential customers whose compressed air equipment uses stationary air nozzles in a production application with an open copper tube of 18rdquo or 14rdquo orifice diameter Energy efficient conditions require replacement of an inefficient non-air entraining air nozzle with an energy efficient air-entraining air nozzle that use less than 15 CFM at 100 psi for industrial applications

Storage Tanks for LoadNo Load Screw Compressors This measure protocol applies to the installation of air receivers with pressureflow controls to loadno load compressors Loadno load compressors unload when there is low demand The process of unloading is done over a period of time to avoid foaming of the lubrication oil Using a storage tank with pressureflow control will buffer the air demands on the compressor Reducing the number of cycles in turn reduces the number of transition times from load to no load and saves energy The baseline equipment is a loadno load compressor with a 1 galcfm storage ratio or a modulating compressor with blowdown The high efficiency equipment is a loadno load compressor with a minimum storage ratio of 4 gallons of storage per cfm

Cycling Refrigerated Thermal Mass Dryer When air is compressed water vapor in the air condenses and collects in liquid form Some of this condensate collects in the air distribution system and can contaminate downstream components such as air tools with rust oil and pipe debris Refrigerated air dryers remove the water vapor by cooling the air to its dew point and separating the condensate Changes in production and seasonal variations in ambient air temperature lead to partial loading conditions on the dryer Standard air dryers use a hot gas bypass system that is inefficient at partial loads A Cycling Thermal Mass Dryer uses a thermal storage medium to store cooling capacity when the system is operated at partial loads allowing the dryer refrigerant compressor to cycle

This measure is targeted to non-residential customers whose equipment is a non-cycling refrigerated air dryer with a capacity of 600 cfm or below Acceptable baseline conditions are a non-cycling (eg continuous) air dryer with a capacity of 600 cfm or below The replacement of desiccant deliquescent heat-of-compression membrane or other types of dryers does not qualify under this measure

Variable Speed Air Compressor This type of compressor uses a special drive to control the speed (RPM) of the unit which in turn saves energy compared to a fixed speed equivalent

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 40

No-loss Condensate Drain Air-Entraining Air Nozzle Cycling Refrigerated Thermal Mass Dryer

Compressor Incentive per

Equipment Type Units Quantity Daily Operating Unit

Hours

CA04 Storage Tanks for LoadNo Load Screw

Compressor HP $10 Compressors

CA05 Variable Speed Air Compressor

Compressor HP $30

CA06 Compressed Air System Optimization

Compressor HP $50

Compressed Air System Optimization The submitted optimization measures must be identified in an Air System Audit or equivalent study to be eligible The measures must demonstrate energy savings as evaluated by a Program Engineer Additionally measures must also fall under one or more of the category below to be eligible

1) Install storage Receivers (new receivers only replacing existing storage receivers are ineligible)

2) Compressor control (must demonstrate improvement in partial load efficiency of the compress air system including reduceeliminate partially loaded units)

3) Dryer control 4) Source pressure reduction 5) Right-sizing distribution components such as piping filters regulators

connectors and hoses (routine maintenance replacements are ineligible) 6) Leakage detection and repair 7) Eliminate low-efficiency end-usages of compressed air 8) Heat recovery (most reduce electricity consumption of the replaced heat source)

Compressed Air Systems Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 41

lt65000 Btuh

~ 65000 Btuh and lt135000 Btuh

135000 Btuhand lt240000 Btuh

240000 Btuh and lt760000 Btuh

760000 Btuh

154

142

135

125

123

Chiller Capacity Path APath B efficiency (kWton )

lt 150 tons

~150 tons and lt300 tons

300 tons and lt400 tons

400 tons and lt600 tons

600 tons

lt75 tons

~75 tons and lt150 tons

~150 tons and lt300 tons

~300 tons and lt600 tons

600 tons

0610 FU0695 FL and 0550 IPLV0440 IPLV

0610 FU0635 FL and 0550 IPLV0400 IPLV

0560 FU0595 FL and 0520 IPLV0390 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

Path APath B efficiency (kWton )

0750 FU0780 FL and 0600 IPLV0500 IPLV

0720 FU0750 FL and 0560 IPLV0490 IPLV

0660 FU0680 FL and 0540 IPLV0440 IPLV

0610 FU0625 FL and 0520 IPLV0410 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

Data Centers Data Center incentives are available for facilities ranging in size from office server closets to large standalone facilities

Air Cooled Chiller Path APath B EER (BtuWh) lt150 tons 101 FL97 FL and 137 IPLV158 IPLV ge150 tons 101 FL97 FL and 140 IPLV161 IPLV

Air Cooled Chiller without Condenser Air-cooled chillers without condenser must be rated with matching condensers and comply with air-cooled chiller efficiency requirements

Computer Room Air Conditioner

Computer Room Air Handler Variable Speed Replacing constant speed CRAH with VSD CRAH

Water Cooled Centrifugal Chiller

Water Cooled Positive Displacement or Reciprocating Chiller

Uninterruptible Power Supply Must be Energy Star Certified UPS or have full load efficiency rating

ge948 for 20-100 kVA ge978for ge100 kVA

Mainframe Refresh The rated efficiency of the replacement Mainframes power supply must be at least 8 more

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 42

- Equipment Type Units IncentiveUnit

D1 Air Cooled Chiller Ton $4000 D2 Air Cooled Chiller W ithout Condenser Ton $2000 D3 Computer Room Air Conditioner Ton $3000 D4 Computer Room Air Handler Variable Speed Ton $1000 D5 Water Cooled Centrifugal Chiller Ton $3000 D6 Water Cooled Positive Displacement or Reciprocatin $3000 D7 Uninterruptible Power Supply 20-100 kVA $1000 D8 Uninterruptible Power Supply gt 100 kVA $1000 D9 Mainframe Refresh $2000

D10 Server Refresh $2000 D11 PC Power Managment System $600 D12 HVAC System Optimization $005 D1 3 HoUCold Aisle Containment kWh saved $005 D14 Server Virtualization kW reduction $40000 D1 5 Thin Clients Units $500

efficient compared to the existing Mainframes power supply The replacement Mainframe if Inactive must be decommissioned and removed from the Data Center

Server Refresh Replacement servers must be ENERGY STARreg certified Replacement servers power supply must be 5 more efficiency compared to the power supply of the replaced servers The replaced server must be decommissioned and removed from the data center

HVAC System Optimization Final system must have these features

-Implementation of free cooling by the addition of an economizer system -Conversion of constant speed CRACCRAH into variable speed operations using VFDs and additional control functionalities and -Elevation of exhaust air temperature

HotCold Aisle Containment Includes both Hot and Cold Aisles Installing new containment measures not replacing already existed aisle containment Plenum-only installations not eligible Must result in higher difference between the return air (hot aisle) and supply air (cold aisle) temperatures measured at rack intake and exhaust locations

Server Virtualization Minimum of consolidating 5 Servers virtualized into one Server The virtualized servers if inactive are removed from the Data Center

Thin Clients Must be ENERGY STAR certified thin clients Decommissioned clients are removed from the Data Center

Data Center Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 43

Whole Building Systems Whole Building Systems Approach

The Whole Building Systems approach is intended to encourage integrated energy efficient designs by providing enhanced incentives to the customer who addresses overall energy performance Owners of eligible and qualifying new construction and major renovation projects can receive Whole Building Systems incentives when energy modeling indicates the projectrsquos performance is over 10 better than the ASHRAE 901-2007 Savings from eligible electric end-uses in kilowatt hours define the amount of financial incentive Energy savings achieved through renewable energy sources are not counted toward project energy savings and are not included in the savings basis Incentive reservations obtained during the design phase of a project will be honored for up to 24 months

How to Apply for Whole Building Systems Incentives Before construction begins bull A Pre-notification Application must be submitted documenting the Owners intention to

seek Whole Building Systems incentives bull The Owner must confirm the goals and energy efficiency strategies being pursued by the

design team on the completed Pre-notification Worksheet (Checklist tab) and in the project Summary (Whole Building Performance Summary tab)

bull Submit executable building modeling software files bull Submit the Whole Building Performance Summary worksheet energy simulation model

inputs and outputs and supporting documentation bull Receive confirmation and eligibility notification from the PECO Smart Ideas team and

receive an incentive reservation bull The final incentive paid may differ from the reserved incentive amount The final

incentive will be calculated based on site-verified equipment installation and performance The Owners final application and complete documentation must be received within 6 months of equipment installation or certificate of occupancy whichever is later

bull An executable energy model and model output demonstrating compliance with the criteria of ASHRAE 901-2007 Appendix G will be required and the equipment data sheets LED lighting fixtures must be on the DLC or Energy STAR qualified products list (QPL) to be eligible LED fixtures not on the DLC or Energy STAR QPL has the option of submitting LM79 and LM80 test reports for evaluation against DLC and Energy STAR eligibility criteria

During the construction period bull Owner and design team continue to work closely with their chosen contractor to assure

energy efficiency measures are included and installed in the completed building

When the building is constructed and operational bull Complete the Owner final application Request an equipment verification site visit by the

PECO Smart Ideas team Equipment must be installed and fully operational o Program staff will schedule a site visit and utilize submitted documentation and

measurement tools to verify that the installation follows the submitted energy simulation model

bull When PECO confirms that there are no significant changes to the installed equipment payment of the reserved incentive will be made to the Owner within 6 weeks

bull If changes from the proposed design energy simulation are found the Owner and design team will be notified of the reduced incentive amount a period of 20 calendar days will

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 44

Improvement Incentive per Sq Ft

over Code

~11 to lt20 $0155

~20 to lt30 $0233

~30 to lt40 $0350

~40 to lt60 $0525

~60 $0700

be allowed for supplemental information to be provided if no additional information is received by PECO Smart Ideas team the reduced incentive payments will be made and sent to the Owner if additional clarification and information is available program staff will work diligently to resolve the discrepancies and arrive at a reasonable incentive adjustment with the customer

Payments made by PECO Smart Ideas are final

Customer Eligibility The Owner of the proposed new building project must be a customer of PECO and receive delivery of electric service from PECO to receive kilowatt-hour based incentives Please note that electricity supply can be provided by any vendor

Project Eligibility bull The project must be a new construction or major renovation Major renovations involving

the removal and redesign of at least two building systems (such as interior lighting and mechanical systems) may apply for Whole Building Systems incentives

bull To qualify for incentives projects must demonstrate energy efficiency enhancements that achieve at least 11 improvement in the proposed design versus the standard baseline

bull The Owner must submit a Pre-approval Application to the program at the stage where changes for increased energy efficiency are still feasible and construction has not been completed

bull Projects receiving Whole Building Systems incentives are not eligible to receive other incentives such as the prescriptive or custom program incentives for the same scope

bull Project components that are NOT eligible for consideration as a basis for PECO Smart Ideas include the following o Alternative fuel sources (eg use of gas or oil equipment in lieu of electric) Please note

that combined heat and power (CHP) systems will be incentivized for the electricity they produce

o Renewable energy sources (eg solar wind biomass) bull Ineligible savings include exterior lighting process receptacle miscellaneous loads and

other unregulated end-uses Custom incentives are available for new construction exterior lighting

Whole Building Systems Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 45

Custom Project Specifications Instructions for Energy Savings Calculations for Custom Projects Custom projects must involve measures that result in a reduction in electric energy use (kWh) Electricity savings may result from either efficiency improvements or fuel switching Custom Incentives are based on the first year kilowatt-hour savings Custom applications must be accompanied by detailed engineering calculations that document the annual total energy savings

The following serve as guidelines for the minimum required documentation

Equipment Information Submittals bull A list of the present and proposed equipment and components to be installed

including manufacturerrsquos catalogmodel number bull Manufacturerrsquos specification sheets showing capacities and performance for all major

components

Energy Savings Calculations Provide calculations documenting the predicted energy consumption of the existing (or baseline) and proposed system using appropriate analytical tools and clearly stated assumptions Calculations may be performed by ldquohandrdquo but spreadsheet analysis or more rigorous modeling is preferred All analysis should be provided in electronic format All assumptions such as operating hours existing and proposed equipment operational details must be presented Engineering algorithms and procedures from recognized technical organizations such as ASHRAE SMACNA ANSI etc must be used Use rated performance factors tested under accepted procedures specified by recognized rating agencies such as AHRI ANSI ASTM etc Provide an explanation when equipment performance rating conditions vary from standard conditions

In support of the calculations extensive documentation must be provided that provides the basis for the savings estimates The documentation must provide information on the equipment operating schedule daily and seasonal load profile and baseline AND energy efficient equipment performance at the operating loads Typical documentation for custom projects often includes bull Engineering or architectural drawings and ldquoequipment schedulerdquo sheets bull Component specification sheets that include part load efficiency or performance

factors bull Spreadsheet calculations or inputoutput files and results from system modeling or

other engineering analysis using accepted engineering algorithms and practices bull Log sheets trend logs from a building management system or other operating

documentation that are often necessary to document operating hours and equipment loading and used as a basis for the calculations (in some cases short term monitoring may be required to document the load profile)

bull Control sequence of operations that are necessary where controls play a part in the savings equation

Additional documentation other than that described in the application may be required for program participation Larger projects may also require pre- and post-project sub metering or monitoring of loads andor power input as part of another measurement and verification activity to demonstrate the actual energy savings that are realized

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 46

Baseline for Custom Analysis Where equipment is replaced prior to the end of its rated service life in order to achieve energy savings the existing equipment performance may be used as the baseline in the energy savings calculations Where equipment is replaced due to failure or for other reasons (such as obsolescence or a need for more capacity) the baseline performance used in the savings calculation should be either the minimum performance that would be required by code for that equipment type and application (where a code applies) or the performance of the equipment that would have been selected as the customers standard practice when a code does not apply

Baseline or Existing System Summary On custom worksheet on application form include make model number name plate information (such as operating voltage and rated full load amps) rated capacity quantities equipment condition and age facility operating hours equipment operating schedule and load curves If needed attach separate sheets

All decisions regarding incentives for custom projects are in the sole discretion of PECO

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 47

APPENDIX PROGRAM UPDATES SUMMARY (Q1 2017) Multifamily Nursing Home and Assisted Living retrofit customers need to apply for incentives through the PECO Smart Ideas Multi-Family Program administered by Franklin Energy For more information please contact Taylor Adler at tadlerfranklinenergycom or call 1-844-4BIZ-SAVE Multifamily Nursing Home and Assisted Living new construction customers can proceed with applying for incentives here

Revised Incentives

Data Centers

Measure Incentive Effective Immediately Previous Incentive

Air-cooled chiller for data centers $40ton $10ton Air-cooled chiller without condenser for data centers $20ton $10ton

Computer room air conditioner $30ton $7ton Water-cooled centrifugal chiller for data centers $30ton $5ton Water-cooled positive displacement or reciprocating chiller for data centers

$30ton $5ton

Uninterruptible power supply 20-100 kVA $10kVA $6kVA Uninterruptible power supply gt100 kVA $10kVA $1kVA Mainframe refresh $20kW installed $5kW installed Server refresh $20kW installed $4kW installed Server virtualization $400kW reduction $4kW reduction Thin clients $5units $4units

Lighting (Effective Immediately)

Measure Incentive Effective Immediately Specification Previous

Incentive Specification

New construction exterior LED outdoor flood light LED parking garage and canopy lighting LED polearm mounted parking and roadway lighting LED wall mount fixture

$005kWh (custom)

Lighting Power Density (LPD) Requirements Unchanged

$10-54 fixture

Lighting Power Density (LPD) (Wft2) by Space Type or Building Area

LED Replacement Lamps (Tubes) 2

$250lamp 5 Min Watts Reduced

$250lamp 6 Min Watts Reduced

LED Replacement Lamps (Tubes) 4

$400lamp 10 Min Watts Reduced

$400lamp 12 Min Watts Reduced

Permanent Fixture Removal $010Watt removed

Clarification of calculation to represent actual Wattage removed

$010Watt removed

Lighting (Effective 6117)

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 48

Measure Incentive Effective 6117 Specification Previous

Incentive Previous Specification

Interior LED high-bay fixtures andor retrofit kits if lt 20000 LED Lumens

$50fixture 150 Min Watts Reduced

$75fixture 150 Min Watts Reduced

Interior LED high-bay fixtures andor retrofit kits if gt 20000 LED Lumens

$75fixture 225 Min Watts Reduced

$75fixture 150 Min Watts Reduced

New Incentives

Compressed Air

Measure New Incentive Effective Immediately Variable speed air compressor $30compressor HP Compressed air system optimization $50compressor HP

HVAC

Measure New Incentive Effective Immediately ECM circulation pump $50pump Retro-commissioning cooling systems $750ton Retro-commissioning whole building $010square foot Energy management system $25ton Demand controlled ventilation $25ton Water-cooled air conditioner $22ton

Food Service

Measure New Incentive Effective Immediately Combination oven $200unit ENERGY STARreg commercial convection oven $150unit ENERGY STARreg commercial fryers $100unit ENERGY STARreg commercial hot holding cabinet $200unit

Refrigeration

Measure New Incentive Effective Immediately Air-cooled refrigeration condenser $10ton Oversized condenser with VFD $10ton Case light occupancy controls $750door

Lighting

Measure New Incentive Effective Immediately Interior central lighting controls $00175sq foot

Motors and Drives

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 49

-

Measure New Incentive Effective Immediately VFD for dust collection system motor $50HP

Application Clarifications and Revised Requirements

Clarification of LED Eligibility for New Construction or Retrofit Projects

LED Eligibility is determined by whether lighting products are listed in either the DesignLights Consortium (DLC) Qualified Products List of commercial-grade LED luminaires or the US Environmental Protection Agency database of ENERGY STAR certified products For products not yet listed contractors may submit LM79 and LM80 test reports PECO Smart Ideas engineers will review test reports to determine if the product in question meets performance specifications

Revised W 9 Requirement

W-9 forms EIN numbers are no longer required

Deletion of erroneous statement in New Construction Lighting

The following statement from previous Business Manual has been deleted ldquoThe minimum lighting power density used to calculate the incentive shall be no lower than 50 of the ASHRAE 901-2007 valuerdquo

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 50

  • Commercial amp Industrial Program Application Manual
    • Follow This Easy Process
      • Pre-Approval Application Checklist
      • Final Application Checklist
          • Terms and Conditions
            • Program Effective Dates
            • Program and Project Eligibility
            • Incentive Payment Limits
            • Application Review Process
            • Inspections andor PUCrsquos Statewide Program Evaluation
            • Requirements for Custom Project Electricity Savings Calculation
            • Tax Liability
            • No Endorsement
            • Warranties
            • Limitation of Liability
            • Assignment
            • Customerrsquos Certification
            • Termination
            • Acknowledgement
              • Retrofit Lighting Solutions
                • General Linear Fluorescent Lamp and Ballast Specification Requirements
                • LED Lamps and Fixtures
                • Minimum Watts Reduced
                • Linear LED (Tubes)
                • Permanent Fixture Removal
                  • LED Traffic Signals
                    • LED Traffic Signals Incentive Table
                      • New Construction Lighting Specifications
                        • New Construction Lighting Incentives Table
                          • New Construction Lighting Power Density Code
                              • Exterior New Construction Lighting
                              • HVAC Equipment
                                • Air-Source Air Conditioners and Air-Source Heat Pumps
                                • Package Terminal Systems (Replacements)
                                • Ductless Mini-Split Heat Pump lt54 Tons
                                • Geothermal Heat Pump
                                  • Other HVAC Equipment
                                    • Hotel Guest Room Occupancy Sensor
                                    • ECM Circulation Fan
                                    • ECM Circulation Pump
                                    • Retrocomissioning Cooling Systems
                                    • Retrocomissioning Whole Building
                                    • Energy Management System
                                    • Demand Controlled Ventilation
                                    • Other HVAC Incentives Table
                                      • Unitary HVAC Chillers
                                        • Air-Cooled Chillers Water Cooled Positive Displacement Reciprocating Chillers and Water Cooled Centrifugal Chillers
                                          • Refrigeration
                                            • Anti-Sweat Heater Controls
                                            • Evaporator Fan Controls
                                            • Floating Head Pressure Controls
                                            • Automatic Door Closers for Walk-In Coolers and Freezers
                                            • EC Motor for Walk-inReach-in Refrigerated cases or Freezer cases
                                            • ENERGY STAR Solid Door Freezer and Glass Door Freezer and Refrigerators
                                            • Refrigeration Suction Pipe Insulation
                                            • Night Cover
                                            • Strip Curtain on Walk-In CoolerFreezer
                                            • Evaporator Coil Defrost Control
                                            • Variable Speed Refrigeration Compressor
                                            • Add Doors to Open Refrigerated Cases
                                            • Door Gaskets
                                            • Zero Energy Doors
                                            • Air Cooled Refrigeration Condenser
                                            • Oversized Condenser with VFD
                                            • Case Light Occupancy Controls
                                            • LED Open Case Lighting
                                            • LED Enclosed Case Lighting Refrigerated
                                            • LED Enclosed Case Lighting Freezer
                                              • Food Service
                                                • Beverage and Snack Machine Controls
                                                • ENERGY STARreg Refrigerated Beverage Vending Machines
                                                • ENERGY STARreg Electric Steam Cooker
                                                • ENERGY STARreg Electric Combination Oven
                                                • ENERGY STARreg Commercial Convection Oven
                                                • ENERGY STARreg Commercial Fryers
                                                • ENERGY STARreg Commercial Hot Holding Cabinet
                                                  • Motors and Variable Frequency Drives
                                                    • Early Replacement Motors
                                                    • Variable Frequency Drives on HVAC Fan Applications
                                                    • Variable Frequency Drives on Pump Applications
                                                    • Variable Speed Control for Kitchen Exhaust Hoods
                                                    • Variable Speed Drives for Process or Other Equipment
                                                      • Domestic Hot Water
                                                        • Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater
                                                        • Heat Pump Water Heater
                                                        • Low Flow Pre-Rinse Spray Valve
                                                        • Domestic Hot Water Incentive Table
                                                          • Compressed Air Systems
                                                            • No-loss Condensate Drain
                                                            • Air-Entraining air nozzle
                                                            • Storage Tanks for LoadNo Load Screw Compressors
                                                            • Cycling Refrigerated Thermal Mass Dryer
                                                            • Variable Speed Air Compressor
                                                            • Compressed Air System Optimization
                                                            • Compressed Air Systems Incentive Table
                                                              • Data Centers
                                                                • Air Cooled Chiller
                                                                • Air Cooled Chiller without Condenser
                                                                • Computer Room Air Conditioner
                                                                • Computer Room Air Handler Variable Speed
                                                                  • Replacing constant speed CRAH with VSD CRAH
                                                                    • Water Cooled Centrifugal Chiller
                                                                    • Water Cooled Positive Displacement or Reciprocating Chiller
                                                                    • Uninterruptible Power Supply
                                                                    • Mainframe Refresh
                                                                    • Server Refresh
                                                                      • Whole Building Systems
                                                                        • Whole Building Systems Approach
                                                                        • How to Apply for Whole Building Systems Incentives
                                                                        • Customer Eligibility
                                                                        • Project Eligibility
                                                                        • Whole Building Systems Incentives Table
                                                                          • Custom Project Specifications
                                                                            • Instructions for Energy Savings Calculations for Custom Projects
                                                                            • Equipment Information Submittals
                                                                            • Energy Savings Calculations
                                                                            • Baseline for Custom Analysis
                                                                            • Baseline or Existing System Summary

bull The LED linear lamps must be delivered as part of a UL 1598C Classified Luminaire Retrofit Kit with instructions explaining the LED linear lamps must be installed on a luminaire that is already UL Listed

bull The retrofitted luminaire must be clearly identified using the label included with the Retrofit Kit indicating that the luminaire has been modified and can no longer operate the originally intended fluorescent lamp(s)

Type C LEDs

bull Type C LED linear lamps are powered by an external driver bull Existing fluorescent ballast must be removed and replaced with a compatible external driver bull DLC Primary Use Requirement ndash DLC-listed equipment must be classified with one of the following Primary Use designations

o 2-lamp External Driver Lamp-Style Retrofit Kits (UL Type C) o 3-lamp External Driver Style Retrofit Kits (UL Type C) o 4-lamp External Driver Lamp-Style Retrofit Kits (UL Type C)

bull Technical specifications (manufacturerrsquos cut sheet) for the driver must be submitted with the application

Permanent Fixture Removal This measure is to be used only in conjunction with lighting retrofits and is intended for spaces that are currently over lit Incentives are paid $010watt reduced only on fixtures removed not on total watts reduced for entire projects Overall net lumen reduction must be achieved in order to qualify for a permanent fixture removal incentive

Example

(20) Existing fixtures at 10000 lumens each = 200000 lumens

(14) Proposed fixtures at 15000 lumens each = 210000 lumens

Since there is not a net reduction in lumens the six fixtures removed would not be eligible for a permanent fixture removal incentive

It is encouraged that spaces meet recommended foot-candle levels as detailed by IESNA Lighting Design Guide A Program Engineer will evaluate lumens reduction based on the type of fixtures removed and the DLC lumens rating of the fixtures installed

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 12

RETROFIT INTERIOR LIGHTING TABLE

Measure Code

Min Measure Name Watts Incentive Unit

Reduced Technical Specifications

CFL Lighting

CFL1A ENERGY STAR Hard-Wired CFL fixture Indoor AccentTrack 20 $250 lamp

Only complete new fixtures or modular hardwired retrofits with hardwired electronic ballasts qualify

CFL ballast must be programmed start or programmed rapid start with a power factor (PF) ge 090 and a total

harmonic distortion (THD) le 20 Screw-in CFLs are not eligible for this incentive

CFL1B ENERGY STAR Hard-Wired CFL fixture Indoor Directional WallCeiling Mount 20 $250 lamp

CFL1C ENERGY STAR Hard-Wired CFL fixture Indoor Omni-Directional WallCeiling Mount 20 $250 lamp

CFL2A ENERGY STAR Hard-Wired CFL fixture Indoor Portable LampTorchiere 20 $1 lamp

CFL2B ENERGY STAR Hard-Wired CFL fixture Indoor Recessed Downlight 20 $1 lamp

CFL2C ENERGY STAR Hard-Wired CFL fixture Indoor Recessed Downlight Retrofit Module 20 $1 lamp

CFL2D ENERGY STAR Hard-Wired CFL fixture Indoor Under CabinetStrip 20 $1 lamp

CFL3A ENERGY STAR Hard-Wired CFL fixture Outdoor Directional WallCeilingGroundPole Mount 30 $3 lamp

CFL3B ENERGY STAR Hard-Wired CFL fixture Outdoor Omni-Directional WallCeilingGroundPole Mount 30 $3 lamp

CFL3C ENERGY STAR Hard-Wired CFL fixture Outdoor Recessed Downlight 30 $3 lamp

CFL3D ENERGY STAR Hard-Wired CFL fixture Outdoor Recessed Downlight Retrofit Module 30 $3 lamp

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 13

Fluorescent Lighting FL1 Interior T5 New Fluorescent Fixture w Electronic Ballast 11 $5 fixture Any T5 is eligible

FL2 T5HO High-Bay Fixture 54 $25 fixture Fixture efficiency must be gt 90

High bay fixtures must be installed at least 15ft above finished floor

FL3 HPT8 High-Bay Fixture 82 $20 fixture Must use High Ballast Factor (gt96) Fixture efficiency must be gt= 85

High bay fixtures must be installed at least 15ft above finished floor

FL4 HPT8 Fixture 20 $5 fixture Must use Low Ballast Factor (lt80)

FL5 RW T8 Lamp - Lamp only 10 $3 lamp Existing T8 fixture re-ballasting to a higher ballast factor are not eligible

HID Measures HID1 Ceramic HID - 25 -39 Watt 95 $13 fixture

Replacing higher wattage HID or High Pressure Sodium or Mercury Vapor

Interior replacements only

HID2 Ceramic HID - 70 Watt 155 $13 fixture HID3 Ceramic HID - 100 Watt 170 $15 fixture HID4 Pulse Start HID - 150 nominal Watts 72 $10 fixture HID5 Pulse Start HID - 350 nominal Watts 100 $13 fixture

HID6 Pulse Start HID - 1000 nominal Watts 400 $15 fixture

Interior LED Fixtures

LED1 ENERGY STAR Integral LED fixture Indoor Recessed Downlight Retrofit Module 38 $7 fixture Retrofit module of existing recessed fixture

LED2 ENERGY STAR Integral LED fixture Indoor Recessed Downlight 38 $7 fixture

New indoor recessed downlight fixture LED3 ENERGY STAR Integral LED fixture Indoor Portable LampTorchiere 30 $7 fixture

LED4 LED AccentTrack Lighting Fixtures 32 $6 head

LED5 LED Low-Bay Fixtures 150 $20 fixture For replacement of HID fixtures mounted le 15 above finished floor

LED6 LED Low-Bay Retrofit Kits 150 $20 fixture

LED8 LED Troffer Fixtures and Retrofit Kits 5 $10 fixture Troffers typically installed in lay-in ceilings 2x2 2x4 configuration

LED9 LED Surface and Suspended Linear Fixtures 25 $10 fixture Examples of LED surface-mounted luminaires include wrap vapor tight and strip fixtures (non-cooler)

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 14

-

Interior LED High Bay Fixtures

LED10A LED High-Bay Fixtures le 20000 LED lumens 150 $50 fixture

High bay fixtures must be installed at least 15ft above finished floor

LED10B LED High-Bay Fixtures gt 20000 LED lumens 225 $75 fixture

LED11A LED High-Bay Retrofit Kits le 20000 LED lumens 150 $50 fixture

LED11B LED High-Bay Retrofit Kits gt20000 LED lumens 225 $75 fixture

LED Parking Garage and Canopy Fixtures

LED12 LED Parking Garage and Canopy Fixtures and Retrofit Kits Outdoor lt= 5000 LED lumens 50 $15 fixture

Fixtures must be physically installed in a parking garage (area where vehicles are physically parked) or

fuel pump canopy Typically represents replacement of le175 W Metal

Halide or equivalent

LED13 LED Parking Garage and Canopy Fixtures and Retrofit Kits Outdoor 5001 - 10000 LED lumens 70 $30 fixture

Typically represents replacement of Metal Halide or equivalent greater than 175W and less than 400W

Product must be installed in a parking garage (area where vehicles are physically parked) or fuel pump

canopy

LED14 LED Parking Garage and Canopy Fixtures and Retrofit Kits Outdoor gt 10000 LED lumens 150 $50 fixture

Typically represents replacement of ge400 W Metal Halide or equivalent

Product must be physically installed in a parking garage (area where vehicles are physically parked) or

fuel pump canopy LED Screw in Lamps

ESLED1 ENERGY STAR Screw-in LED Bulb (Decorative Globe) 14 $5 lamp Lamp with globe shape such as type G

ESLED2 ENERGY STAR Screw-in LED Bulb (Decorative non-globe 14 $5 lamp Lamps with non-globe or candle-like shape such as type B C CA F

ESLED3 ENERGY STAR Screw-in LED Bulb and Low Voltage Mini-Reflector Bulbs (DirectionalReflector) 14 $5 lamp ANSI standard PAR and MR type lamps

ESLED4 ENERGY STAR Screw-in LED Bulb (Standard) 14 $5 lamp Lamp such as A series

ESLED5 ENERGY STAR Screw-in LED Bulb (Standard 3-Way) 14 $5 lamp Lamp such as A series with three light levels

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 15

- -LED Screw in Lamps Smart Bulbs

ESLED6 ENERGY STAR Screw-in LED Bulb (Decorative Globe Smart Bulb) 14 $5 lamp Lamp with globe shape such as type G

ESLED7 ENERGY STAR Screw-in LED Bulb (Decorative non-globe Smart Bulb) 14 $5 lamp Lamps with non-globe or candle-like shape such as

type B C CA F

ESLED8 ENERGY STAR Screw-in LED Bulb (DirectionalReflector Smart Bulb) 14 $5 lamp ANSI standard PAR lamps

ESLED9 ENERGY STAR Screw-in LED Bulb (Standard Smart Bulb) 14 $5 lamp Lamp such as A series

LED Tubes (replacing fluorescent)

TLED1 LED Replacement Lamps (Tubes) 2 5 $250 lamp Refer to Lighting Technical Specifications for requirements DLC Type A B and C are eligible bullType B linear (Interior driver) LEDs have the following installation requirements

bullExisting fluorescent ballast must be removed and fixturersquos incoming power wires are connected directly to the lamp sockets Strict adherence to installation instructions is critical when rewiring existing fixtures bullThe LED linear lamps must be delivered as part of a UL 1598C Classified Luminaire Retrofit Kit with instructions explaining the LED linear lamps must be installed on a luminaire that is already UL Listed bullThe retrofitted luminaire must be clearly identified using the label included with the Retrofit Kit indicating that the luminaire has been modified and can no longer operate the originally intended fluorescent lamp(s)

TLED2 LED Replacement Lamps (Tubes) 4 10 $4 lamp

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 16

LED Exterior Lighting

ELED1 ENERGY STAR Integral LED fixture Outdoor Recessed Downlight Retrofit Module 24 $10 module

ENERGY STAR or DLC Qualified fixtures ELED2 ENERGY STAR Integral LED fixture Outdoor Recessed

Downlight 24 $10 fixture

ELED3 LED Outdoor Flood Light Fixtures lt= 5000 LED lumens 50 $10 fixture Typically represents replacement of le175 W Metal Halide or equivalent Fixtures must be DLC qualified

ELED4 LED Outdoor Flood Light Fixtures gt 5000 LED lumens 70 $15 fixture Typically represents replacement of Metal Halide or equivalent greater than 175W Fixtures must be DLC qualified

ELED5 LED PoleArm Mounted Parking and Roadway Fixtures and Retrofit Kits lt= 5000 LED lumens 50 $25 fixture Typically represents replacement of le175 W Metal

Halide or equivalent Product must be DLC qualified

ELED6 LED PoleArm Mounted Parking and Roadway Fixtures and Retrofit Kits Outdoor gt 10000 LED lumens 150 $75 fixture

Typically represents replacement of Metal Halide or equivalent greater than 400W Product must be DLC

listed

ELED7 LED PoleArm Mounted Parking and Roadway Fixtures and Retrofit Kits Outdoor 5001 - 10000 LED lumens 70 $50 fixture

Typically represents replacement of Metal Halide or equivalent greater than 175W and less than 400W

Product must be DLC listed

ELED8 LED Wall Mount Fixtures and Retrofit Kits Outdoor lt= 5000 LED lumens 50 $25 fixture Typically represents replacement of le175 W Metal

Halide or equivalent Product must be DLC qualified

ELED9 LED Wall Mount Fixtures and Retrofit Kits Outdoor gt 5000 LED lumens 70 $50 fixture

Typically represents replacement of Metal Halide or equivalent greater than 175W Product must be DLC

qualified Permanent Fixture Removal

PFRA Indoor Permanent Fixture Removal combined with lighting retrofit na $010 watt removed Incentive only valid when units = ldquofixturerdquo in this table

Incentive is only offered when net lumens are reduced PFRB Outdoor Permanent Fixture Removal combined with lighting retrofit na $010 watt removed

Other LED Lighting LEDEXIT LED Exit Sign

na

$2 sign Replacing Incandescent or Fluorescent

SIGN1A Indoor LED Channel Signage $8 letter

Replacing Neon SIGN1B Outdoor LED Channel Signage $8 letter

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 17

Lighting Controls

CTL Unitary Sensor Controls

na

$1500 sensor

Passive infrared ultrasonic detectors are eligible Includes daylighting controls and all occupancy controls

Controls can be onoff stepped or continuous (dimming) Daylight sensor controls are required to be commissioned in order to ensure proper sensor calibration and energy savings

Minimum of 30 watts controlled per control

CLC Interior Central Lighting Controls $00175

square foot of area

under control

Automated central lighting control systems with override capabilities

This measure includes centrally-controlled time clocks wireless on off switches bi level switches computer based

controls pre-set scene selection dimmable ballasts and on-off dimmer switches for non-personal tuning

Floor plan must be submitted verifying square footage

DAYOCC Controls Combination - Daylighting and Occupancy Fixture Mounted $1500 sensor Minimum of 30 watts controlled per control

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 18

LED Traffic SignalsThis measure applies to the early replacement of existing incandescent traffic lights and pedestrian signals with LEDs New LED traffic signals must comply with ENERGY STAR requirements which can be found at httpswwwenergystargoviapartnersproduct_specseligibilitytraffic_eligpdf98bfshy1786

LED Traffic Signals Incentive Table

Round Traffic Signals 8 Red

Incentive per Signal

$15

8 Yellow 8 Green 12 Red

12 Yellow 12 Green

Turn Arrow Signals

8 Red

$13

8 Yellow 8 Green 12 Red

12 Yellow 12 Green

Pedestrian Signals

9 Pedestrian Only

$13

12 Hand Only 12 Pedestrian Only 12 Countdown Only

12 Pedestrian and Hand Overlay 16 Pedestrian and Hand Side by

Side 16 Pedestrian and Hand Overlay

16 Hand and Countdown Side-by-Side

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 19

Lighting Controls that Exceed Code Requirements

New Construction Lighting SpecificationsUnder the Lighting Power Density Approach the lighting power installed is compared with the lighting power allowed by code Incentives are available for systems where the installed lighting power is lower than the code-allowed power by at least 10 Savings are based on the Lighting Power Density (LPD) calculated on a watts per square foot basis Incentives will be paid only on the area of the building where the lighting installation is complete and is ready for occupancy If a portion of a building is not built-out such that the lighting in an area is not complete and ready for occupancy then that portion is not eligible for an incentive Baseline lighting power density is based on ASHRAE 901- 2007 Either the Space-by-Space or Building Area method may be used to calculate the LPD for the purposes of the incentive

Required Documentation bull Lighting Worksheet bull COMcheck Interior Lighting Report or equivalent analysis demonstrating space-byshy

space or building area calculations bull Reflected ceiling plans and electrical plan sheets showing lighting fixture layout bull Lighting fixture schedule sheet including fixture counts bull Fixture submittal or specification sheets showing model number and rated fixture wattage bull Architectural floor plans displaying floor area affected by proposed lighting installation

New Construction Lighting Incentives Table Lighting Wattssq ft

Improvement over of Code Incentive

gt= 10 and lt 20 $0035sq gt= 20 and lt 30 $007sq ft gt= 30 and lt 40 $0105sq

gt= 40 $021 sq ft

Incentives will be paid on a ($005kWh) custom basis Please contact Program Staff for eligibility of lighting controls for New Construction projects

Interior Occupancy Sensors Incentives are offered for occupancy-based controls in areas where they are not required by code Passive infrared ultrasonic detectors and fixture-integrated sensors or sensors with a combination sensor are eligible All sensors must be hard-wired and control interior lighting fixtures The incentive is per Watt controlled An inventory of the controlled fixtures and their wattage must be provided for each sensor with the Final Application

Daylight Dimming System Incentives are offered for daylight sensor controls in spaces with suitable available ambient light for at least part of the day Light may be through skylights clerestories windows or ldquolight tubesrdquo The controls can be onoff stepped or continuous dimming The onoff controller should turn off artificial lighting when the interior illuminance meets the desired indoor lighting level The stepped controller generally dims the artificial lighting 50 when the interior illuminance levels reach 50 of the desired lighting levels Continuous or dimming controllers dim artificial lighting proportionally to the available ambient light All types of daylight sensor controls are required to be commissioned in order to ensure proper sensor calibration and energy savings

Required Documentation bull Cut sheets or submittals of lighting control systems Reflected ceiling plans or schedule

showing which fixtures are controlled by lighting controls

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 20

New Construction Lighting Power Density CodeRequirements ndash Space by Space Method

Building Specific Space Types LPD (Wft2) Building Specific Space Types LPD (Wft2)

GymnasiumExercise Center AutomotivemdashServiceRepair 07

Playing Area 14 Manufacturing

Exercise Area 09 Low (lt25 ft Floor to Ceiling Height) 12

CourthousePolice StationPenitentiary High (gt25 ft Floor to Ceiling Height) 17

Courtroom 19 Detailed Manufacturing 21

Confinement Cells 09 Equipment Room 12

Judges Chambers 13 Control Room 05

Fire Stations HotelMotel Guest Rooms 11 Fire Station Engine Room 08 DormitorymdashLiving Quarters 11

Sleeping Quarters 03 Museum

Post Office-Sorting Area 12 General Exhibition 10 Convention Center-Exhibit Space 13 Restoration 17

Library BankOfficemdashBanking Activity Area 15 Card File and Cataloging 11 Religious Buildings

Stacks 17 Worship Pulpit Choir 24

Reading Area 12 Fellowship Hall 09

Hospital Retail

Emergency 27 Sales Area [For accent lighting see 93121(c)] 17

Recovery 08 Mall Concourse 17

Nurse Station 10 Sports Arena

ExamTreatment 15 Ring Sports Area 27

Pharmacy 12 Court Sports Area 23

Patient Room 07 Indoor Playing Field Area 14

Operating Room 22 Warehouse

Nursery 06 Fine Material Storage 14

Medical Supply 14 MediumBulky Material Storage 09

Physical Therapy 09 Parking GaragemdashGarage Area 02

Radiology 04 Transportation

LaundrymdashWashing 06 AirportmdashConcourse 06

AirTrainBusmdashBaggage Area 10

TerminalmdashTicket Counter 15

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 21

New Construction Lighting Power Density CodeRequirements ndash Building Area Method

Building Area Type 221 LPD (Wft2)

Automotive facility 09

Convention center 12

Courthouse 12

Dining bar loungeleisure 13

Dining cafeteriafast food 14

Dining family 16

Dormitory 1

Exercise center 1

Gymnasium 11

Health-care clinic 1

Hospital 12

Hotel 1

Library 13

Manufacturing facility 13

Motel 1

Motion picture theater 12

Building Area Type LPD (Wft2)

Multifamily 07

Museum 11

Office 1

Parking garage 03

Penitentiary 1

Performing arts theater 16

Policefire station 1

Post office 11

Religious building 13

Retail 15

Schooluniversity 12

Sports arena 11

Town hall 11

Transportation 1

Warehouse 08

Workshop 14

221 In cases where both a common space type and a building specific type are listed the building specific space type shall apply

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 22

Exterior New Construction LightingExterior New Construction savings over code lighting power density will be incentivized using custom lighting measure at $005kWh rate Participants must submit exterior lighting plans Submittals COMCHECK REPORT and lighting schedule for exterior lighting Savings are calculated from the LPD (Wsq ft) indicated below Additional information may be required based on the building exterior type and space description indicated below To contribute to incentive LEDs must satisfy program requirements for DLC Energy Star or equivalent listing

Required Documentation bull COMcheck Interior Lighting Report or equivalent analysis demonstrating space-by-space or

building area calculations bull Drawings showing lighting fixture layout bull Lighting fixture schedule sheet including fixture counts bull Fixture submittal or specification sheets showing model number and rated fixture wattage

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 23

Building Exterior Space Description LPD

Unco erect Pariki Ilg Area Parlurng ots arnd Drives 0 15 WfW

B i ing Grournds W al 1Yays lless Hlan 11] e 10 Wltirneru- 00

W a Nays 10 middot de or greater 112 W

Plaza a reas

Spec rest re areas

Stainh1ays 1ow 2

B i ing 8ntrames and Exits Ma efilbies m wr near foot of door width

Other doors 2o w 1r ear foot of door width

Ctmqpies and Overhimgs Free starndillg and a ched tmd 12s w m2 m bullerhangs

0 door sales Op en areas (ind udi Ilg ve id e sales 05 W lo )

street frontage far vehicle sales lots 21] W linear toot in addi middot on to open are-0bullmiddot lo~nce

B i ing facades 0 2 W tfl2 middot or eacil illumirnated N311 or surface

o r 5 0 Wllinear root fo r eac h m n inated N3l1 o r

surface length

Automated te lle r rnachmiddot es a lld 210 W per loca tion plus 91] night deposito liies W 1pernddiliorml A I middot per

1oca middot om

Eirltrances and gatehouse inspecliion 125 W ffl2 o middot uncovered slatiaBS a goo~ ed acir ies area

Load ing are-0s or law enforcement 0 5 W 2 of u rnco1bullered area fire ambu rnce and otiher emergency service ibullehmiddotctes

Drive-through w indOWs a taslrood 400 W per drive-Hlrough restaurants

Parking near 24 -h our retail 80111 W per main entry entmn ces

HVAC Equipment Air-Source Air Conditioners and Air-Source Heat Pumps New unitary air conditioning units or air source heat pumps that meet or exceed the qualifying cooling efficiency shown in the HVAC Incentives Worksheet are eligible for an incentive They can be either split systems or single package units The efficiency of split systems is based on an ARI reference number All packaged and split system cooling equipment must meet Air Conditioning and Refrigeration Institute (ARI) standards (210240 320 or 340360) be UL listed use a minimum ozone-depleting refrigerant (eg HCFC or HFC) All required efficiencies are based on the Consortium for Energy Efficiency (CEE) high-efficiency commercial air conditioning and heat pump specifications (wwwcee1org) A manufacturerrsquos specification sheet indicating the system efficiency must accompany the application Disposal of the existing unit

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 24

must comply with local codes and ordinances

Package Terminal Systems (Replacements) Package terminal air conditioners and packaged terminal heat pumps are through-the-wall self-contained units that are 2 tons (24000 Btuh) or less All EER values must be rated at 95degF outdoor dry-bulb temperature

Ductless Mini-Split Heat Pump lt54 Tons Incentives are offered for Ductless Mini-Split Heat Pump lt54 Tons with SEER rating greater than or equal to 120 and EER greater than or equal to 145 and HSPF greater than or equal to 90

Geothermal Heat Pump Geothermal equipment is a high-efficiency groundwater source water source or ground source heat pump system that meets or exceeds the energy efficiency requirements shown in the tables below These measures do not apply to heat pump systems coupled with non-heat pump systems such as chillers rooftop AC units boilers or cooling towers which must be filed as custom measures All HVAC applications other than comfort cooling and heating such as process cooling must also be applied for as custom measures

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 25

HVAC Heating Qualifying Incentive

Equipment Type and Cooling Capacity Cooling Qualifying Efficiency ($ per cooling Measure Code Efficiency

ton)

Air Cooled Air Conditioner

H01 lt 54 tons (lt 65000 Btuhr) 15 SEER NA $22

H02 lt 54 and lt 11 25 tons

125 IEER $22 (lt 65 000 Btuh and lt 135 000 Btuhr) NA

H03 lt11 25 and lt 20 tons

123 IEER NA $22 (lt 135000 Btuh and lt 240000 Btuhr)

H04 lt 20 and lt 6333 tons (~

11 1 IEER NA $22 240000 Btuh and lt 760000 Btuhr)

HOS ~ 6333 Ions (~ 760000 Btuhr) 103 IEER NA $22

Air Cooled Heat Pumps

H06 lt 54 tons (lt 65000 Btuhr) 143 SEER 87 HSPF $30

H07 lt 54 and lt 11 25 tons

123 IEER 3 3 COP $30 (lt 65000 Btuh and lt 135000 Btuhr)

HOS lt11 25 and lt 20 tons

1U IEER 3 2 COP $30 (lt 135000 Btuh and lt 240000 Btuhr)

H09 lt 2000 tons (240000 Btuhr) 105 IEER 3 2 COP $30

Packaged Terminal Systems (PTAC and PTHP) (PTHP only)

H10 lt 8000 Btuhr (lt066 tons) 11 8 EER 33 $17

H11 ~8000 and lt10500 Btuhr (~066 and lt 0875 tons) 11 4 EER 32 $17

H12 gt10500 Btuhr ( 875 tons) 107 EER 31 $17

H22 lt 54 tons (lt 65000 Btuhr) 121 EER 12 3 IEER NA $22

lt 54 and lt 11 25 tons 121 EER 12 3 IEER $22 H23

(lt 65000 Btuh and lt 135000 Btuhr) NA

H24 lt11 25 and lt 20 tons

120 EER 12 2 IEER $22 (lt 135000 Btuh and lt 240000 Btuhr) NA

H25 lt20 and lt 633 tons

119 EER 12 2 IEER $22 (lt 240000 Btuh and lt 760000 Btuhr) NA

H26 ~ 633 tons( lt760000 Btuhr) 110 EER 11 1 IEER NA

$22

HVAC Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 26

Other HVAC EquipmentHotel Guest Room Occupancy Sensor Incentives are offered for occupancy-based controls that control electric air conditioning air source heat pumps and or electric heating units for individual hotel rooms Systems with nonshyelectric heat are not eligible Sensors must be controlled by automatic occupancy detectors or a key-card system and the default setting for controlled units differ by at least 5 degrees (or shut the unit fan and heating or cooling off completely) from the operating set point during unshyoccupied periods The control system may also be tied into other electric loads such as lighting and plug loads to shut them off when occupancy is not sensed The incentive is per room Replacement or upgrades of existing occupancy-based controls are not eligible as a prescriptive incentive

Economizer Integrated Dual Enthalpy Economizer ControlsThis measure is targeted to non-residential establishments whose HVAC equipment is not equipped with a functional economizer

Circulation Fan High-Volume Low-SpeedFans must be greater than 16 feet in diameter and have variable speed control

ECM Circulation Fan This measure is targeted to non-residential customers whose air handling equipment currently uses a SP or PSC fan motor rather than an ECM This measure applies only to circulating fan motors of 1 HP or less Above 1 HP motors are governed by NEMA standards and would see little to no efficiency benefit by adding an ECM The targeted fan can supply heating or cooling only or both heating and cooling

ECM Circulation Pump This measure is targeted for replacement of a shaded pole or permanent split capacitor pump or motor with an electronically commutated pump or motor le75 HP

Retrocomissioning Cooling Systems Confined to chiller plant andor isolated packaged units For reservation must contain proposal with defined scope at equipment level that demonstrates energy savings For final approval required final commissioning report including raw data (TAB reports) demonstrating actual scope

This prescriptive measure can be used for facilities with maximum cooling demand less than 1687 tons Larger systems require the use of custom HVAC measure

Retrocomissioning Whole Building Covers all relevant major mechanical systems such as chiller plant air side systems compressed air andor process systems For reservation must contain proposal with defined scope at equipment level that demonstrates energy savings For final approval required final commissioning report including raw data (TAB reports) demonstrating actual scope

This prescriptive measure can be used for facilities less than 404858 square feet Larger facilities require the use of custom HVAC measure

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 27

Energy Management System For installing a web-based building automation system in existing buildings that currently have no digital automated HVAC controls or have outdated pneumatic control systems with inoperable time control functions Existing HVAC control systems must not have time-of-day scheduling Upgrading obsolete EMS HVAC system with inoperable time clock functions will be reviewed on a case-by-case basis for incentive eligibility This incentive cannot be combined with incentives for programmable thermostats or setback-setup controls Must include the controls strategy and a scaled floor-plan with controlled areas highlighted HVAC BAS systems must be new and include bull Central time clock control bull Web-based interface with PC-based controls and graphic bull Building performance Tracking bull Open-protocol architecture controls system shall consist of either LonTalk (ANSICEA 7091) or BACNet (ASHRAE ANSI 135) protocol being used between all controlled and controlling devices and every node on the network bull Minimum setback period must exceed 2200 hours per year bull A minimum setback space temperature of at least 10degF when heating and 5degF when cooling bull Ability to adjust schedules and settings remotely over the internet bull Report generation describing energy and operating trends

This prescriptive measure can be used for facilities with maximum cooling demand less than 456 tons Larger systems require the use of custom HVAC measure

Demand Controlled Ventilation New ventilation controls must use carbon dioxide levels to measure occupancy and modify the percentage of outside air based on occupancy levels Only buildings with space heating and cooling requirements are eligible Conditioned spaces must be kept between 65ordmF and 75ordmF during occupied operating hours Carbon dioxide sensors must be installed in conjunction with fully functioning motor operated outside air dampers Dual temperature air-side economizers with zone-level CO2 sensors for rooftop units are eligible

This prescriptive measure can be used for facilities with maximum cooling demand less than 2210 tons Larger systems require the use of custom HVAC measure

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 28

Other HVAC Measures- consult project manual for eligibility specifications HVAC

Measure Incentive Unit Quantity Incentive

Measure Code er Unit

H1 8 Hotel Guest Room Occupancy Sensor Room $20

H1 9 Economizer Integrated Dual Enthalpy Economizer Controls Ton $1 5

H20 Circulation Fan High-Volume Low-Speed Unit $30

H21 ECM Circulation Fan Fan $1 5

H27 ECM Circulation Pump Pump $50

H28 Retrocommissioning Cooling Systems

Ton $750

H29 Retrocommissioning Whole Buidling

Square Foot $010

H29 Energy Management System Ton $2500

H30 Demand Controlled Ventilation Ton $2500

Other HVAC Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 29

Unitary HVAC Chillers

Air-Cooled Chillers Water Cooled Positive Displacement Reciprocating Chillers and Water Cooled Centrifugal Chillers Chiller applications including existing multiple chiller configurations (including redundant or lsquostand-byrsquo chillers) existing chillers serving multiple load groups and chillers in industrial applications are defined as non-standard applications and must follow a site-specific custom protocol $005kWh) rate

Incentives are offered for chillers with an IPLV value (expressed in kW per ton) that is less than or equal to the qualifying efficiency shown in the table below The chiller efficiency rating must be based on ARI Standard 550590-2003 for IPLV conditions The chillers must meet ARI standards 550590-2003 be UL listed and use a minimum ozone-depleting refrigerant (eg HCFC or HFC) The ARI net capacity value should be used to determine the chiller tons A manufacturerrsquos specification sheet with the rated kWton-IPLV or COP-IPLV must accompany the application along with the four point performance data that is the basis for the IPLV The application must include a certification that the chiller is appropriately sized for site design load conditions

Chillers must satisfy efficiency requirements for both full load and IPLV efficiencies for either Path A or Path B The table shows the minimum efficiency ratings to qualify for the prescriptive incentive which must be consistent with the expected operating conditions of the efficient chiller For example if the efficient chiller satisfies Path A and generally performs at part load the appropriate baseline chiller efficiency is the IPLV value under Path A If the efficient chiller satisfies Path B and generally performs at full load the appropriate baseline chiller efficiency is the full load value under Path B Generally chillers operating above 70 percent load for a majority (50 or more) of operating hours should use Path A and chillers below 70 load for the majority of operating hours should use Path B

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 30

C3 lt 75 tons

C4 75 tons and lt 150 tons

cs ~ 150 tons and lt 300 tons C6 ~ 300 tons

Water Cooled Centrifugal Chillers C7 lt 300 tons CB ~ 300 tons and lt 600 tons

C9 ~ 600 tons

Path A

Qualifying Full Load Efficiency

Qualifying IPLV Efficiency

Path B

Qualifying Full Load Efficiency

Qualifying IPLV Efficiency

0780 kWton 0567 kWton 0800 kWton 0540 kWton

0775 kWton 0554 kWton 0790 kWton 0527 kWton

0680 kWton 0522 kWton 0718 kWton 0486 kWton 0620 kWton 0486 kWton 0639 kWton 0441 kWton

0634 kWton 0536 kWton 0639 kWton 0405 kWton 0576 kWton 0494 kWton 0600 kWton 0360 kWton

0570 kWton 0494 kWton 0590 kWton 0360 kWton

I

Incentive ($ton)

$17

$17

Unitary Chiller Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 31

Refrigeration

Anti-Sweat Heater Controls Incentives are offered for devices that sense the relative humidity in the air outside of the display case and cycles or turns off the glass door (if applicable) and frame anti-sweat heaters when the ambient dew point is below a preset set point Technologies that can turn off anti-sweat heaters based on sensing condensation (on the inner glass pane) also qualify Incentive is based on the number of doors

Evaporator Fan Controls This measure is for the installation of controls in medium temperature walk-in coolers The controller reduces airflow of the evaporator fans when there is no refrigerant flow The measure must control a minimum of 120 HP where fans operate continuously at full speed The measure also must reduce fan motor power by at least 75 during the off cycle This measure is not applicable if any of the following conditions apply 1) Compressor runs all the time with high duty cycle 2) Evaporator fan does not run at full speed all the time 3) Evaporator fan motor runs on poly-phase power 4) Evaporator fan motor is not shaded-pole or permanent split capacitor (PSC) 5) Evaporator fan does not use off-cycle or time-off defrost

Floating Head Pressure Controls Controls must vary head pressure to adjust condensing temperatures in relation to outdoor air temperature Must replace existing constant pressure or manually controlled systems to achieve reduced head pressure in order to maintain a minimum saturated condensing temperature of 70 degF or a 20 degF variance below design heat pressure during mild weather conditions Compressor size must be at least 5 HP

Automatic Door Closers for Walk-In Coolers and Freezers The auto-closer should be applied to the main insulated opaque door(s) of a walk-in cooler or freezer The auto-closer must be able to firmly close that door when it is within one inch of full closure This must be a newly installed automatic door closer replacements on previously installed door closers are not eligible for an incentive

EC Motor for Walk-inReach-in Refrigerated cases or Freezer cases Incentives are offered for replacement of an existing standard-efficiency shaded-pole or permanent split capacitor evaporator fan motor in refrigerated display cases or fan coil in walk-ins The replacement unit must be an Electronically Commutated Motor (ECM) This measure cannot be used in conjunction with the Evaporator Fan Controller measure

ENERGY STAR Solid Door Freezer and Glass Door Freezer and Refrigerators Incentives are offered for replacement of existing self-contained refrigerators and freezers with units that are ENERGY STARreg listed Only units with built-in refrigeration systems are qualified Units with remote refrigeration systems or units do not qualify Customers must provide proof that the appliance meets the CEE or ENERGY STAR efficiency specifications using ASHRAE Standard 72-2005 (38degF plusmn 2degF) Incentive is per unit

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 32

Refrigeration Suction Pipe Insulation 1 Must insulate bare refrigeration suction lines of 1 58 inches in diameter or less on existing equipment only 2 Cooler lines require frac34 inch of flexible closed-cell nitrite rubber or an equivalent insulation 3 Freezer lines require 1-inch of flexible closed-cell nitrite rubber or an equivalent insulation 4 Insulation exposed to the outdoors must be protected from the weather (ie jacketed with a medium-gauge aluminum jacket)

Night Cover 1 Must install a cover on an existing open refrigerated display case to decrease its cooling load during off hours 2 The equipment manufacturer must not object to the use of night covers for the existing display case model 3 This rebate is based on the linear footage of the installed 4 The cover must be applied for a period of at least six hours

Strip Curtain on Walk-In CoolerFreezer 1 New strip curtains or plastic swinging doors must be installed on doorways of refrigerated spaces (conditioned to less than 50deg F) 2 Rebate is based on the linear footage of the doorway that the strip curtains are being installed in 3 Opening between the strip curtain and bottom of doorway must be no larger than 1 inch 4 Strips must have an overlay greater than 1 inch

Evaporator Coil Defrost Control 1The current system must include an operating electric defrost system with a functional electroshymechanical time clock 2 Evaporator coil temperature and pressure must be monitored by controller in order to determine optimal defrost cycles 3 New intelligent control systems to control the defrost systems will typically replace timed- defrost controls

Variable Speed Refrigeration Compressor This measure VSD control for refrigeration systems and its eligibility targets applies to retrofit construction in the commercial and industrial building sectors it is most applicable to grocery stores or food processing applications with refrigeration systems This protocol is for a VSD control system replacing a slide valve control system

Add Doors to Open Refrigerated Cases The eligible retrofit equipment is either no sweat doors or doors with anti-sweat heaters If a lighting retrofit is included with the new doors it must consume the same amount of energy or less energy than the old lighting Upgrades to lighting or other system components should be processed separately Horizontal cases are not eligible and should be processed as custom

Door Gaskets PECO Smart Ideas For Your Business CampI Program Application Manual

Q1 2017 pg 33

This measure is applicable to commercial refrigeration and applies to the replacement of worn-out gaskets with new better-fitting gaskets Applicable gaskets include those located on the doors of walk-in andor reach-in coolers and freezers This protocol applies to the main doors of both low temperature (ldquofreezerrdquo ndash below 32 degF) and medium temperature (ldquocoolerrdquo ndash above 32 degF) walk-ins

Zero Energy Doors For this measure a no-heatlow-heat clear glass door must be installed on an upright display case It is limited to door heights of 57 inches or more Doors must have either heat reflective treated glass be gas filled or both This measure applies to low temperature cases onlymdashthose with a case temperature below 0degF Doors must have 3 or more panes Total door rail glass and frame heater amperage ( 120 volt) cannot exceed 039413 amps per door for low temperature display cases Rebate is based on the door width (not including case frame)

Air Cooled Refrigeration Condenser Approach temperature lt8F for low temperature loads lt13F for medium temperature loads

Oversized Condenser with VFD New standalone condenser must no more than 150 larger than load

Case Light Occupancy Controls Acceptable for freezer or refrigerated cases as well as open cases or cases with doors

LED Open Case Lighting For replacing open case T8 or T12 fluorescent fixtures with DLC listed LEDs on refrigerators coolers and freezers

LED Enclosed Case Lighting Refrigerated LED case lighting with or without motion sensors on enclosed refrigerated vertical displays The baseline equipment is assumed to be cases with uncontrolled T8 or T12 linear fluorescent lamps

LED Enclosed Case Lighting Freezer LED case lighting with or without motion sensors on enclosed freezer vertical displays The baseline equipment is assumed to be cases with uncontrolled T8 or T12 linear fluorescent lamps

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 34

Refrigeration Measures Ref Measure

Measure Incentive Unit IncentiveUnit Code R01 Anti-Sweat Heater Controls Door $30

R02 Evaporator Fan Controls Controller $50

R03 Floating-head Pressure Controls HP $20

R04 Automatic Door Closers fo r Walk-in Coolers Door $75

R05 Automatic Door Closers fo r Walk-in Freezers Door $75

R06 Evaporator Fan EC Motor fo r Reach- in Cases Motor $35

RO Evaporator Fan EC Motor fo r Walk-in Cases Motor $50

R08 ENERGY STARreg Glass Door Freezer lt15 Cu Ft Unit $100

R09 ENERGY STARreg Glass Door Freezer 15- 49 Cu Ft Unit $125

R10 ENERGY STARreg Glass Door Freezer ~ 50 Cu Ft Unit $145

R11 ENERGY STARreg Solid Door Freezer Unit $75

R12 ENERGY STARreg Glass Door Refrigerator lt50 Cu Ft Unit $30

R13 ENERGY STARreg Glass Door Refrigerator gt= 50 Cu Ft Unit $50

K14 t NtKGY ~ I AKreg ~Olld Uoor Ketngerator $ OU Cu t-t Unit $~0

R15 Suction Pipe Insulation Walk-in Coolers Linear Foot $050

R16 Suction Pipe Insulation Walk in Freezers Linear Foot $075

R17 Night Cover Linear Foot $800

R18 Strip Curtains on Walk-in Cooler Linear Foot $250

R19 Evaporator Coil Defrost Control Controller $7500

R20 Variable Speed Refrigeration Compressor Compressor $85

R21 Add Doors to Open Refrigerated Cases Door $55

R22 Door Gaskets Door $250

R23 Zero Energy Doors Door $50

R24 A ir Cooled Refrigeration Condenser Ton $10

R25 Oversized Condenser with VFD Ton $10

R26 Case Light Occupancy Controls Door $8

R27 LED Open Cose Lighting Cose $10

R28 LED Enclosed Case Lighting Refrigerated Door $30

R30 LED Enclosed Case Lighting Freezer Door $30

Refrigeration Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 35

Food Service Beverage and Snack Machine Controls Incentives are offered for refrigerated vending machines that contain non-perishable bottled and canned beverages Controller for both types of systems must include a passive infrared occupancy sensor to turn off fluorescent lights and other energized machine systems when the surrounding area is unoccupied for 15 minutes or longer For the refrigerated machines the control logic may include periodic power up at 2-hour intervals or longer to maintain product temperature and provide compressor protection

ENERGY STARreg Refrigerated Beverage Vending Machines Incentives are offered for ENERGY STARreg beverage vending machines Qualifying machines can be found at httpswwwenergystargovproductsothervending_machines

ENERGY STARreg Electric Steam Cooker This measure applies to the installation of electric ENERGY STAR steam cookers as either a new item or replacement for an existing unit Gas steam cookers are not eligible The steam cookers must meet minimum ENERGY STAR efficiency requirements A qualifying steam cooker must meet a minimum cooking efficiency of 50 percent and meet idle energy rates specified by pan capacity

ENERGY STARreg Electric Combination Oven This measure applies to electric ovens capable of handling single 12 x 20 x 25 pan per rack

ENERGY STARreg Commercial Convection Oven The oven must meet or exceed heavy load potato cooking energy efficiency of greater than 70 utilizing ASTM Standard F149 Applies only to electric ovens

ENERGY STARreg Commercial Fryers The commercial fryer must have a tested heavy load (French fry for large vats) cooking energy efficiency of greater than 80 utilizing American Society for Testing and Materials (ASTM) Standard F1361 for commercial fryers and ASTM Standard F2144 for large vat fryers Multiple vat configurations are paid per qualifying vat ENERGY STAR maintains a list of qualifying products and specifications at httpwwwenergystargov

ENERGY STARreg Commercial Hot Holding Cabinet Energy STAR rating electric

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 36

Food Service amp Other Measures FoodOther

Measure Incentive Unit Incentive

Measure Code Unit

F01 Beverage Machine Controls Unit $25

F02 Snack Machine Controls Unit $20

F03 ENERGY STARreg Refrigerated Beverage Vending Machir Unit $125

F04 ENERGY STARreg Commerc ial Steam Cooker Unit $200

F05 ENERGY STARreg Electric Combination Oven Unit $200

F06 ENERGY STARreg Commercial Electric Convection Oven Unit $150

F07 ENERGY STARreg Commerc ial Fryers Unit $100

F08 ENERGY STARregCommerc ial Hot Holding Cabinet Unit $200

Food Service Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 37

Motors and Variable Frequency DrivesEarly Replacement Motors For constant speed and uniformly loaded motors this measure applies to the replacement of old motors with new energy efficient motors of the same rated horsepower Old motors must be less than 15 years Replacements where the old motor and new motor have different horsepower ratings are considered custom measures Motors with variable speeds variable loading or industrial-specific applications are also considered custom measures

Motors Incentive Table Motors

Measure Code

HP Incentive per Motor

M01 15 - 10 $40 M02 11 - 50 $100 M03 51-100 $150 M04 gt100 $300

Only VFDs on unitary systems are eligible Non-unitary systems must be submitted as a custom measure Soft start motors are not eligible

Variable Frequency Drives on HVAC Fan Applications Incentives are offered for installing VFDs on existing HVAC fans that do not have pre-existing VFDs This measure applies to HVAC supply and return fans only All other fans including cooling tower fans must be submitted as custom measures Manually fixed speed settings on HVAC fans must be submitted via custom application The VFD must control motor speed automatically in response to pressure flow temperature or other variable signal The installation of a VSD must accompany the permanent removal or disabling of any throttling devices such as inlet vanes bypass dampers and throttling valves etc The incentive is offered per controlled HP

Variable Frequency Drives on Pump Applications Incentives are offered for installing VFDs on existing chilled water pumps and heating hot water pumps that do not have existing VFDs This measure applies to chilled water pumps and heating hot water pumps only All other pumps must be submitted as custom measures Manually fixed speed settings on pumps must be submitted via custom application The VFD must control motor speed automatically in response to pressure flow temperature or other variable signal The installation of a VSD must accompany the permanent removal or disabling of any throttling devices such as throttling valves The incentive is offered per controlled HP

Variable Speed Control for Kitchen Exhaust Hoods The measure consists of installing a new VSD in conjunction with a sensor control system that varies the exhaust rate of kitchen ventilation (exhaust andor makeup air fans) based on the heat and effluent output from the cooking appliances (ie the more heat and smokevapors generated the more ventilation needed) This involves installing a temperature sensor in the hood exhaust collar andor an optic sensor on the end of the hood that senses cooking conditions and allows the system to automatically vary the rate of exhaust to match requirements by adjusting the fan speed accordingly

Variable Speed Drives for Process or Other Equipment VFD must be used in conjunction with a process (non HVAC) application To qualify for this incentive the driven equipment must operate at least 2000 hours per year Redundant or back- up units do not qualify VFDs replacing existing VFDs do not qualify The VFD must control motor

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 38

speed automatically in response to pressure flow temperature or other variable signal VFDs installed as ldquosoft startrdquo without automatic manual closed loop speed control do not qualify The installation of a VFD must accompany the permanent removal or disabling of any throttling devices such as throttling valves The incentive is per controlled HP and only applies to controlled motors less than 50 HP

VSDVFD Incentives Table VFD

Measure Code

Measure Unit Incentive per Unit

Fan Application

V01 VFD on HVAC Fan HP $25 Pump Application

Variable Speed Control for Kitchen Exhaust Hoods

Variable Speed Drives for Process or Other Equipment

V02 VFD on Chilled Water Pumps HP $25 V03 VFD on Heating Hot Water Pumps HP $25

V04 Kitchen Exhaust Fan Retrofit Hood HP $500

V05 Process Motor lt 50 HP HP $50

Domestic Hot Water Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater This measure documents the energy savings attributed to converting from a standard electric water heater to an ENERGY STAR natural gaspropane-fired water heater or a standard oil-fired water heater with an Energy Factor of 0585

Heat Pump Water Heater This includes heat pump water heaters with energy factors meeting ENERGY STAR criteria The measure described here involves a direct retrofit of a resistive electric water heater with a heat pump water heater It does not cover systems where the heat pump is a pre-heater or is combined with other water heating sources More complicated installations can be treated as custom projects

Low Flow Pre-Rinse Spray Valve This measure applies to efficient low flow pre-rinse sprayers in grocery and food service applications The most likely areas of application are kitchens in restaurants and hotels Only premises with electric water heating may qualify for this incentive In addition the replacement pre-rinse spray nozzle must use less than 16 gallons per minute with a cleanability performance of 26 seconds per plate or less Low flow pre-rinse sprayers reduce hot water usage and save energy associated with water heating

Domestic Hot Water Incentive Table

Measure Code Measure Unit Retrofit Incentive per

Unit

W01 Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater Unit $100

W02 Heat Pump Water Heater Unit $100 W03 Low-Flow Pre-Rinse Spray Valve Valve $17

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 39

Compressed Air SystemsNo-loss Condensate Drain No-loss Condensate Drains are controlled by a sensor that monitors the level of condensate and only open when there is a need to drain condensate They close before compressed air is allowed to escape This measure is targeted to non-residential customers whose equipment is a timed drain that operates on a pre-set schedule Acceptable baseline conditions are compressed air systems with standard condensate drains operated by a solenoid and timer

Air-Entraining air nozzle This measure is targeted to non-residential customers whose compressed air equipment uses stationary air nozzles in a production application with an open copper tube of 18rdquo or 14rdquo orifice diameter Energy efficient conditions require replacement of an inefficient non-air entraining air nozzle with an energy efficient air-entraining air nozzle that use less than 15 CFM at 100 psi for industrial applications

Storage Tanks for LoadNo Load Screw Compressors This measure protocol applies to the installation of air receivers with pressureflow controls to loadno load compressors Loadno load compressors unload when there is low demand The process of unloading is done over a period of time to avoid foaming of the lubrication oil Using a storage tank with pressureflow control will buffer the air demands on the compressor Reducing the number of cycles in turn reduces the number of transition times from load to no load and saves energy The baseline equipment is a loadno load compressor with a 1 galcfm storage ratio or a modulating compressor with blowdown The high efficiency equipment is a loadno load compressor with a minimum storage ratio of 4 gallons of storage per cfm

Cycling Refrigerated Thermal Mass Dryer When air is compressed water vapor in the air condenses and collects in liquid form Some of this condensate collects in the air distribution system and can contaminate downstream components such as air tools with rust oil and pipe debris Refrigerated air dryers remove the water vapor by cooling the air to its dew point and separating the condensate Changes in production and seasonal variations in ambient air temperature lead to partial loading conditions on the dryer Standard air dryers use a hot gas bypass system that is inefficient at partial loads A Cycling Thermal Mass Dryer uses a thermal storage medium to store cooling capacity when the system is operated at partial loads allowing the dryer refrigerant compressor to cycle

This measure is targeted to non-residential customers whose equipment is a non-cycling refrigerated air dryer with a capacity of 600 cfm or below Acceptable baseline conditions are a non-cycling (eg continuous) air dryer with a capacity of 600 cfm or below The replacement of desiccant deliquescent heat-of-compression membrane or other types of dryers does not qualify under this measure

Variable Speed Air Compressor This type of compressor uses a special drive to control the speed (RPM) of the unit which in turn saves energy compared to a fixed speed equivalent

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 40

No-loss Condensate Drain Air-Entraining Air Nozzle Cycling Refrigerated Thermal Mass Dryer

Compressor Incentive per

Equipment Type Units Quantity Daily Operating Unit

Hours

CA04 Storage Tanks for LoadNo Load Screw

Compressor HP $10 Compressors

CA05 Variable Speed Air Compressor

Compressor HP $30

CA06 Compressed Air System Optimization

Compressor HP $50

Compressed Air System Optimization The submitted optimization measures must be identified in an Air System Audit or equivalent study to be eligible The measures must demonstrate energy savings as evaluated by a Program Engineer Additionally measures must also fall under one or more of the category below to be eligible

1) Install storage Receivers (new receivers only replacing existing storage receivers are ineligible)

2) Compressor control (must demonstrate improvement in partial load efficiency of the compress air system including reduceeliminate partially loaded units)

3) Dryer control 4) Source pressure reduction 5) Right-sizing distribution components such as piping filters regulators

connectors and hoses (routine maintenance replacements are ineligible) 6) Leakage detection and repair 7) Eliminate low-efficiency end-usages of compressed air 8) Heat recovery (most reduce electricity consumption of the replaced heat source)

Compressed Air Systems Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 41

lt65000 Btuh

~ 65000 Btuh and lt135000 Btuh

135000 Btuhand lt240000 Btuh

240000 Btuh and lt760000 Btuh

760000 Btuh

154

142

135

125

123

Chiller Capacity Path APath B efficiency (kWton )

lt 150 tons

~150 tons and lt300 tons

300 tons and lt400 tons

400 tons and lt600 tons

600 tons

lt75 tons

~75 tons and lt150 tons

~150 tons and lt300 tons

~300 tons and lt600 tons

600 tons

0610 FU0695 FL and 0550 IPLV0440 IPLV

0610 FU0635 FL and 0550 IPLV0400 IPLV

0560 FU0595 FL and 0520 IPLV0390 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

Path APath B efficiency (kWton )

0750 FU0780 FL and 0600 IPLV0500 IPLV

0720 FU0750 FL and 0560 IPLV0490 IPLV

0660 FU0680 FL and 0540 IPLV0440 IPLV

0610 FU0625 FL and 0520 IPLV0410 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

Data Centers Data Center incentives are available for facilities ranging in size from office server closets to large standalone facilities

Air Cooled Chiller Path APath B EER (BtuWh) lt150 tons 101 FL97 FL and 137 IPLV158 IPLV ge150 tons 101 FL97 FL and 140 IPLV161 IPLV

Air Cooled Chiller without Condenser Air-cooled chillers without condenser must be rated with matching condensers and comply with air-cooled chiller efficiency requirements

Computer Room Air Conditioner

Computer Room Air Handler Variable Speed Replacing constant speed CRAH with VSD CRAH

Water Cooled Centrifugal Chiller

Water Cooled Positive Displacement or Reciprocating Chiller

Uninterruptible Power Supply Must be Energy Star Certified UPS or have full load efficiency rating

ge948 for 20-100 kVA ge978for ge100 kVA

Mainframe Refresh The rated efficiency of the replacement Mainframes power supply must be at least 8 more

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 42

- Equipment Type Units IncentiveUnit

D1 Air Cooled Chiller Ton $4000 D2 Air Cooled Chiller W ithout Condenser Ton $2000 D3 Computer Room Air Conditioner Ton $3000 D4 Computer Room Air Handler Variable Speed Ton $1000 D5 Water Cooled Centrifugal Chiller Ton $3000 D6 Water Cooled Positive Displacement or Reciprocatin $3000 D7 Uninterruptible Power Supply 20-100 kVA $1000 D8 Uninterruptible Power Supply gt 100 kVA $1000 D9 Mainframe Refresh $2000

D10 Server Refresh $2000 D11 PC Power Managment System $600 D12 HVAC System Optimization $005 D1 3 HoUCold Aisle Containment kWh saved $005 D14 Server Virtualization kW reduction $40000 D1 5 Thin Clients Units $500

efficient compared to the existing Mainframes power supply The replacement Mainframe if Inactive must be decommissioned and removed from the Data Center

Server Refresh Replacement servers must be ENERGY STARreg certified Replacement servers power supply must be 5 more efficiency compared to the power supply of the replaced servers The replaced server must be decommissioned and removed from the data center

HVAC System Optimization Final system must have these features

-Implementation of free cooling by the addition of an economizer system -Conversion of constant speed CRACCRAH into variable speed operations using VFDs and additional control functionalities and -Elevation of exhaust air temperature

HotCold Aisle Containment Includes both Hot and Cold Aisles Installing new containment measures not replacing already existed aisle containment Plenum-only installations not eligible Must result in higher difference between the return air (hot aisle) and supply air (cold aisle) temperatures measured at rack intake and exhaust locations

Server Virtualization Minimum of consolidating 5 Servers virtualized into one Server The virtualized servers if inactive are removed from the Data Center

Thin Clients Must be ENERGY STAR certified thin clients Decommissioned clients are removed from the Data Center

Data Center Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 43

Whole Building Systems Whole Building Systems Approach

The Whole Building Systems approach is intended to encourage integrated energy efficient designs by providing enhanced incentives to the customer who addresses overall energy performance Owners of eligible and qualifying new construction and major renovation projects can receive Whole Building Systems incentives when energy modeling indicates the projectrsquos performance is over 10 better than the ASHRAE 901-2007 Savings from eligible electric end-uses in kilowatt hours define the amount of financial incentive Energy savings achieved through renewable energy sources are not counted toward project energy savings and are not included in the savings basis Incentive reservations obtained during the design phase of a project will be honored for up to 24 months

How to Apply for Whole Building Systems Incentives Before construction begins bull A Pre-notification Application must be submitted documenting the Owners intention to

seek Whole Building Systems incentives bull The Owner must confirm the goals and energy efficiency strategies being pursued by the

design team on the completed Pre-notification Worksheet (Checklist tab) and in the project Summary (Whole Building Performance Summary tab)

bull Submit executable building modeling software files bull Submit the Whole Building Performance Summary worksheet energy simulation model

inputs and outputs and supporting documentation bull Receive confirmation and eligibility notification from the PECO Smart Ideas team and

receive an incentive reservation bull The final incentive paid may differ from the reserved incentive amount The final

incentive will be calculated based on site-verified equipment installation and performance The Owners final application and complete documentation must be received within 6 months of equipment installation or certificate of occupancy whichever is later

bull An executable energy model and model output demonstrating compliance with the criteria of ASHRAE 901-2007 Appendix G will be required and the equipment data sheets LED lighting fixtures must be on the DLC or Energy STAR qualified products list (QPL) to be eligible LED fixtures not on the DLC or Energy STAR QPL has the option of submitting LM79 and LM80 test reports for evaluation against DLC and Energy STAR eligibility criteria

During the construction period bull Owner and design team continue to work closely with their chosen contractor to assure

energy efficiency measures are included and installed in the completed building

When the building is constructed and operational bull Complete the Owner final application Request an equipment verification site visit by the

PECO Smart Ideas team Equipment must be installed and fully operational o Program staff will schedule a site visit and utilize submitted documentation and

measurement tools to verify that the installation follows the submitted energy simulation model

bull When PECO confirms that there are no significant changes to the installed equipment payment of the reserved incentive will be made to the Owner within 6 weeks

bull If changes from the proposed design energy simulation are found the Owner and design team will be notified of the reduced incentive amount a period of 20 calendar days will

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 44

Improvement Incentive per Sq Ft

over Code

~11 to lt20 $0155

~20 to lt30 $0233

~30 to lt40 $0350

~40 to lt60 $0525

~60 $0700

be allowed for supplemental information to be provided if no additional information is received by PECO Smart Ideas team the reduced incentive payments will be made and sent to the Owner if additional clarification and information is available program staff will work diligently to resolve the discrepancies and arrive at a reasonable incentive adjustment with the customer

Payments made by PECO Smart Ideas are final

Customer Eligibility The Owner of the proposed new building project must be a customer of PECO and receive delivery of electric service from PECO to receive kilowatt-hour based incentives Please note that electricity supply can be provided by any vendor

Project Eligibility bull The project must be a new construction or major renovation Major renovations involving

the removal and redesign of at least two building systems (such as interior lighting and mechanical systems) may apply for Whole Building Systems incentives

bull To qualify for incentives projects must demonstrate energy efficiency enhancements that achieve at least 11 improvement in the proposed design versus the standard baseline

bull The Owner must submit a Pre-approval Application to the program at the stage where changes for increased energy efficiency are still feasible and construction has not been completed

bull Projects receiving Whole Building Systems incentives are not eligible to receive other incentives such as the prescriptive or custom program incentives for the same scope

bull Project components that are NOT eligible for consideration as a basis for PECO Smart Ideas include the following o Alternative fuel sources (eg use of gas or oil equipment in lieu of electric) Please note

that combined heat and power (CHP) systems will be incentivized for the electricity they produce

o Renewable energy sources (eg solar wind biomass) bull Ineligible savings include exterior lighting process receptacle miscellaneous loads and

other unregulated end-uses Custom incentives are available for new construction exterior lighting

Whole Building Systems Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 45

Custom Project Specifications Instructions for Energy Savings Calculations for Custom Projects Custom projects must involve measures that result in a reduction in electric energy use (kWh) Electricity savings may result from either efficiency improvements or fuel switching Custom Incentives are based on the first year kilowatt-hour savings Custom applications must be accompanied by detailed engineering calculations that document the annual total energy savings

The following serve as guidelines for the minimum required documentation

Equipment Information Submittals bull A list of the present and proposed equipment and components to be installed

including manufacturerrsquos catalogmodel number bull Manufacturerrsquos specification sheets showing capacities and performance for all major

components

Energy Savings Calculations Provide calculations documenting the predicted energy consumption of the existing (or baseline) and proposed system using appropriate analytical tools and clearly stated assumptions Calculations may be performed by ldquohandrdquo but spreadsheet analysis or more rigorous modeling is preferred All analysis should be provided in electronic format All assumptions such as operating hours existing and proposed equipment operational details must be presented Engineering algorithms and procedures from recognized technical organizations such as ASHRAE SMACNA ANSI etc must be used Use rated performance factors tested under accepted procedures specified by recognized rating agencies such as AHRI ANSI ASTM etc Provide an explanation when equipment performance rating conditions vary from standard conditions

In support of the calculations extensive documentation must be provided that provides the basis for the savings estimates The documentation must provide information on the equipment operating schedule daily and seasonal load profile and baseline AND energy efficient equipment performance at the operating loads Typical documentation for custom projects often includes bull Engineering or architectural drawings and ldquoequipment schedulerdquo sheets bull Component specification sheets that include part load efficiency or performance

factors bull Spreadsheet calculations or inputoutput files and results from system modeling or

other engineering analysis using accepted engineering algorithms and practices bull Log sheets trend logs from a building management system or other operating

documentation that are often necessary to document operating hours and equipment loading and used as a basis for the calculations (in some cases short term monitoring may be required to document the load profile)

bull Control sequence of operations that are necessary where controls play a part in the savings equation

Additional documentation other than that described in the application may be required for program participation Larger projects may also require pre- and post-project sub metering or monitoring of loads andor power input as part of another measurement and verification activity to demonstrate the actual energy savings that are realized

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 46

Baseline for Custom Analysis Where equipment is replaced prior to the end of its rated service life in order to achieve energy savings the existing equipment performance may be used as the baseline in the energy savings calculations Where equipment is replaced due to failure or for other reasons (such as obsolescence or a need for more capacity) the baseline performance used in the savings calculation should be either the minimum performance that would be required by code for that equipment type and application (where a code applies) or the performance of the equipment that would have been selected as the customers standard practice when a code does not apply

Baseline or Existing System Summary On custom worksheet on application form include make model number name plate information (such as operating voltage and rated full load amps) rated capacity quantities equipment condition and age facility operating hours equipment operating schedule and load curves If needed attach separate sheets

All decisions regarding incentives for custom projects are in the sole discretion of PECO

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 47

APPENDIX PROGRAM UPDATES SUMMARY (Q1 2017) Multifamily Nursing Home and Assisted Living retrofit customers need to apply for incentives through the PECO Smart Ideas Multi-Family Program administered by Franklin Energy For more information please contact Taylor Adler at tadlerfranklinenergycom or call 1-844-4BIZ-SAVE Multifamily Nursing Home and Assisted Living new construction customers can proceed with applying for incentives here

Revised Incentives

Data Centers

Measure Incentive Effective Immediately Previous Incentive

Air-cooled chiller for data centers $40ton $10ton Air-cooled chiller without condenser for data centers $20ton $10ton

Computer room air conditioner $30ton $7ton Water-cooled centrifugal chiller for data centers $30ton $5ton Water-cooled positive displacement or reciprocating chiller for data centers

$30ton $5ton

Uninterruptible power supply 20-100 kVA $10kVA $6kVA Uninterruptible power supply gt100 kVA $10kVA $1kVA Mainframe refresh $20kW installed $5kW installed Server refresh $20kW installed $4kW installed Server virtualization $400kW reduction $4kW reduction Thin clients $5units $4units

Lighting (Effective Immediately)

Measure Incentive Effective Immediately Specification Previous

Incentive Specification

New construction exterior LED outdoor flood light LED parking garage and canopy lighting LED polearm mounted parking and roadway lighting LED wall mount fixture

$005kWh (custom)

Lighting Power Density (LPD) Requirements Unchanged

$10-54 fixture

Lighting Power Density (LPD) (Wft2) by Space Type or Building Area

LED Replacement Lamps (Tubes) 2

$250lamp 5 Min Watts Reduced

$250lamp 6 Min Watts Reduced

LED Replacement Lamps (Tubes) 4

$400lamp 10 Min Watts Reduced

$400lamp 12 Min Watts Reduced

Permanent Fixture Removal $010Watt removed

Clarification of calculation to represent actual Wattage removed

$010Watt removed

Lighting (Effective 6117)

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 48

Measure Incentive Effective 6117 Specification Previous

Incentive Previous Specification

Interior LED high-bay fixtures andor retrofit kits if lt 20000 LED Lumens

$50fixture 150 Min Watts Reduced

$75fixture 150 Min Watts Reduced

Interior LED high-bay fixtures andor retrofit kits if gt 20000 LED Lumens

$75fixture 225 Min Watts Reduced

$75fixture 150 Min Watts Reduced

New Incentives

Compressed Air

Measure New Incentive Effective Immediately Variable speed air compressor $30compressor HP Compressed air system optimization $50compressor HP

HVAC

Measure New Incentive Effective Immediately ECM circulation pump $50pump Retro-commissioning cooling systems $750ton Retro-commissioning whole building $010square foot Energy management system $25ton Demand controlled ventilation $25ton Water-cooled air conditioner $22ton

Food Service

Measure New Incentive Effective Immediately Combination oven $200unit ENERGY STARreg commercial convection oven $150unit ENERGY STARreg commercial fryers $100unit ENERGY STARreg commercial hot holding cabinet $200unit

Refrigeration

Measure New Incentive Effective Immediately Air-cooled refrigeration condenser $10ton Oversized condenser with VFD $10ton Case light occupancy controls $750door

Lighting

Measure New Incentive Effective Immediately Interior central lighting controls $00175sq foot

Motors and Drives

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 49

-

Measure New Incentive Effective Immediately VFD for dust collection system motor $50HP

Application Clarifications and Revised Requirements

Clarification of LED Eligibility for New Construction or Retrofit Projects

LED Eligibility is determined by whether lighting products are listed in either the DesignLights Consortium (DLC) Qualified Products List of commercial-grade LED luminaires or the US Environmental Protection Agency database of ENERGY STAR certified products For products not yet listed contractors may submit LM79 and LM80 test reports PECO Smart Ideas engineers will review test reports to determine if the product in question meets performance specifications

Revised W 9 Requirement

W-9 forms EIN numbers are no longer required

Deletion of erroneous statement in New Construction Lighting

The following statement from previous Business Manual has been deleted ldquoThe minimum lighting power density used to calculate the incentive shall be no lower than 50 of the ASHRAE 901-2007 valuerdquo

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 50

  • Commercial amp Industrial Program Application Manual
    • Follow This Easy Process
      • Pre-Approval Application Checklist
      • Final Application Checklist
          • Terms and Conditions
            • Program Effective Dates
            • Program and Project Eligibility
            • Incentive Payment Limits
            • Application Review Process
            • Inspections andor PUCrsquos Statewide Program Evaluation
            • Requirements for Custom Project Electricity Savings Calculation
            • Tax Liability
            • No Endorsement
            • Warranties
            • Limitation of Liability
            • Assignment
            • Customerrsquos Certification
            • Termination
            • Acknowledgement
              • Retrofit Lighting Solutions
                • General Linear Fluorescent Lamp and Ballast Specification Requirements
                • LED Lamps and Fixtures
                • Minimum Watts Reduced
                • Linear LED (Tubes)
                • Permanent Fixture Removal
                  • LED Traffic Signals
                    • LED Traffic Signals Incentive Table
                      • New Construction Lighting Specifications
                        • New Construction Lighting Incentives Table
                          • New Construction Lighting Power Density Code
                              • Exterior New Construction Lighting
                              • HVAC Equipment
                                • Air-Source Air Conditioners and Air-Source Heat Pumps
                                • Package Terminal Systems (Replacements)
                                • Ductless Mini-Split Heat Pump lt54 Tons
                                • Geothermal Heat Pump
                                  • Other HVAC Equipment
                                    • Hotel Guest Room Occupancy Sensor
                                    • ECM Circulation Fan
                                    • ECM Circulation Pump
                                    • Retrocomissioning Cooling Systems
                                    • Retrocomissioning Whole Building
                                    • Energy Management System
                                    • Demand Controlled Ventilation
                                    • Other HVAC Incentives Table
                                      • Unitary HVAC Chillers
                                        • Air-Cooled Chillers Water Cooled Positive Displacement Reciprocating Chillers and Water Cooled Centrifugal Chillers
                                          • Refrigeration
                                            • Anti-Sweat Heater Controls
                                            • Evaporator Fan Controls
                                            • Floating Head Pressure Controls
                                            • Automatic Door Closers for Walk-In Coolers and Freezers
                                            • EC Motor for Walk-inReach-in Refrigerated cases or Freezer cases
                                            • ENERGY STAR Solid Door Freezer and Glass Door Freezer and Refrigerators
                                            • Refrigeration Suction Pipe Insulation
                                            • Night Cover
                                            • Strip Curtain on Walk-In CoolerFreezer
                                            • Evaporator Coil Defrost Control
                                            • Variable Speed Refrigeration Compressor
                                            • Add Doors to Open Refrigerated Cases
                                            • Door Gaskets
                                            • Zero Energy Doors
                                            • Air Cooled Refrigeration Condenser
                                            • Oversized Condenser with VFD
                                            • Case Light Occupancy Controls
                                            • LED Open Case Lighting
                                            • LED Enclosed Case Lighting Refrigerated
                                            • LED Enclosed Case Lighting Freezer
                                              • Food Service
                                                • Beverage and Snack Machine Controls
                                                • ENERGY STARreg Refrigerated Beverage Vending Machines
                                                • ENERGY STARreg Electric Steam Cooker
                                                • ENERGY STARreg Electric Combination Oven
                                                • ENERGY STARreg Commercial Convection Oven
                                                • ENERGY STARreg Commercial Fryers
                                                • ENERGY STARreg Commercial Hot Holding Cabinet
                                                  • Motors and Variable Frequency Drives
                                                    • Early Replacement Motors
                                                    • Variable Frequency Drives on HVAC Fan Applications
                                                    • Variable Frequency Drives on Pump Applications
                                                    • Variable Speed Control for Kitchen Exhaust Hoods
                                                    • Variable Speed Drives for Process or Other Equipment
                                                      • Domestic Hot Water
                                                        • Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater
                                                        • Heat Pump Water Heater
                                                        • Low Flow Pre-Rinse Spray Valve
                                                        • Domestic Hot Water Incentive Table
                                                          • Compressed Air Systems
                                                            • No-loss Condensate Drain
                                                            • Air-Entraining air nozzle
                                                            • Storage Tanks for LoadNo Load Screw Compressors
                                                            • Cycling Refrigerated Thermal Mass Dryer
                                                            • Variable Speed Air Compressor
                                                            • Compressed Air System Optimization
                                                            • Compressed Air Systems Incentive Table
                                                              • Data Centers
                                                                • Air Cooled Chiller
                                                                • Air Cooled Chiller without Condenser
                                                                • Computer Room Air Conditioner
                                                                • Computer Room Air Handler Variable Speed
                                                                  • Replacing constant speed CRAH with VSD CRAH
                                                                    • Water Cooled Centrifugal Chiller
                                                                    • Water Cooled Positive Displacement or Reciprocating Chiller
                                                                    • Uninterruptible Power Supply
                                                                    • Mainframe Refresh
                                                                    • Server Refresh
                                                                      • Whole Building Systems
                                                                        • Whole Building Systems Approach
                                                                        • How to Apply for Whole Building Systems Incentives
                                                                        • Customer Eligibility
                                                                        • Project Eligibility
                                                                        • Whole Building Systems Incentives Table
                                                                          • Custom Project Specifications
                                                                            • Instructions for Energy Savings Calculations for Custom Projects
                                                                            • Equipment Information Submittals
                                                                            • Energy Savings Calculations
                                                                            • Baseline for Custom Analysis
                                                                            • Baseline or Existing System Summary

RETROFIT INTERIOR LIGHTING TABLE

Measure Code

Min Measure Name Watts Incentive Unit

Reduced Technical Specifications

CFL Lighting

CFL1A ENERGY STAR Hard-Wired CFL fixture Indoor AccentTrack 20 $250 lamp

Only complete new fixtures or modular hardwired retrofits with hardwired electronic ballasts qualify

CFL ballast must be programmed start or programmed rapid start with a power factor (PF) ge 090 and a total

harmonic distortion (THD) le 20 Screw-in CFLs are not eligible for this incentive

CFL1B ENERGY STAR Hard-Wired CFL fixture Indoor Directional WallCeiling Mount 20 $250 lamp

CFL1C ENERGY STAR Hard-Wired CFL fixture Indoor Omni-Directional WallCeiling Mount 20 $250 lamp

CFL2A ENERGY STAR Hard-Wired CFL fixture Indoor Portable LampTorchiere 20 $1 lamp

CFL2B ENERGY STAR Hard-Wired CFL fixture Indoor Recessed Downlight 20 $1 lamp

CFL2C ENERGY STAR Hard-Wired CFL fixture Indoor Recessed Downlight Retrofit Module 20 $1 lamp

CFL2D ENERGY STAR Hard-Wired CFL fixture Indoor Under CabinetStrip 20 $1 lamp

CFL3A ENERGY STAR Hard-Wired CFL fixture Outdoor Directional WallCeilingGroundPole Mount 30 $3 lamp

CFL3B ENERGY STAR Hard-Wired CFL fixture Outdoor Omni-Directional WallCeilingGroundPole Mount 30 $3 lamp

CFL3C ENERGY STAR Hard-Wired CFL fixture Outdoor Recessed Downlight 30 $3 lamp

CFL3D ENERGY STAR Hard-Wired CFL fixture Outdoor Recessed Downlight Retrofit Module 30 $3 lamp

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 13

Fluorescent Lighting FL1 Interior T5 New Fluorescent Fixture w Electronic Ballast 11 $5 fixture Any T5 is eligible

FL2 T5HO High-Bay Fixture 54 $25 fixture Fixture efficiency must be gt 90

High bay fixtures must be installed at least 15ft above finished floor

FL3 HPT8 High-Bay Fixture 82 $20 fixture Must use High Ballast Factor (gt96) Fixture efficiency must be gt= 85

High bay fixtures must be installed at least 15ft above finished floor

FL4 HPT8 Fixture 20 $5 fixture Must use Low Ballast Factor (lt80)

FL5 RW T8 Lamp - Lamp only 10 $3 lamp Existing T8 fixture re-ballasting to a higher ballast factor are not eligible

HID Measures HID1 Ceramic HID - 25 -39 Watt 95 $13 fixture

Replacing higher wattage HID or High Pressure Sodium or Mercury Vapor

Interior replacements only

HID2 Ceramic HID - 70 Watt 155 $13 fixture HID3 Ceramic HID - 100 Watt 170 $15 fixture HID4 Pulse Start HID - 150 nominal Watts 72 $10 fixture HID5 Pulse Start HID - 350 nominal Watts 100 $13 fixture

HID6 Pulse Start HID - 1000 nominal Watts 400 $15 fixture

Interior LED Fixtures

LED1 ENERGY STAR Integral LED fixture Indoor Recessed Downlight Retrofit Module 38 $7 fixture Retrofit module of existing recessed fixture

LED2 ENERGY STAR Integral LED fixture Indoor Recessed Downlight 38 $7 fixture

New indoor recessed downlight fixture LED3 ENERGY STAR Integral LED fixture Indoor Portable LampTorchiere 30 $7 fixture

LED4 LED AccentTrack Lighting Fixtures 32 $6 head

LED5 LED Low-Bay Fixtures 150 $20 fixture For replacement of HID fixtures mounted le 15 above finished floor

LED6 LED Low-Bay Retrofit Kits 150 $20 fixture

LED8 LED Troffer Fixtures and Retrofit Kits 5 $10 fixture Troffers typically installed in lay-in ceilings 2x2 2x4 configuration

LED9 LED Surface and Suspended Linear Fixtures 25 $10 fixture Examples of LED surface-mounted luminaires include wrap vapor tight and strip fixtures (non-cooler)

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 14

-

Interior LED High Bay Fixtures

LED10A LED High-Bay Fixtures le 20000 LED lumens 150 $50 fixture

High bay fixtures must be installed at least 15ft above finished floor

LED10B LED High-Bay Fixtures gt 20000 LED lumens 225 $75 fixture

LED11A LED High-Bay Retrofit Kits le 20000 LED lumens 150 $50 fixture

LED11B LED High-Bay Retrofit Kits gt20000 LED lumens 225 $75 fixture

LED Parking Garage and Canopy Fixtures

LED12 LED Parking Garage and Canopy Fixtures and Retrofit Kits Outdoor lt= 5000 LED lumens 50 $15 fixture

Fixtures must be physically installed in a parking garage (area where vehicles are physically parked) or

fuel pump canopy Typically represents replacement of le175 W Metal

Halide or equivalent

LED13 LED Parking Garage and Canopy Fixtures and Retrofit Kits Outdoor 5001 - 10000 LED lumens 70 $30 fixture

Typically represents replacement of Metal Halide or equivalent greater than 175W and less than 400W

Product must be installed in a parking garage (area where vehicles are physically parked) or fuel pump

canopy

LED14 LED Parking Garage and Canopy Fixtures and Retrofit Kits Outdoor gt 10000 LED lumens 150 $50 fixture

Typically represents replacement of ge400 W Metal Halide or equivalent

Product must be physically installed in a parking garage (area where vehicles are physically parked) or

fuel pump canopy LED Screw in Lamps

ESLED1 ENERGY STAR Screw-in LED Bulb (Decorative Globe) 14 $5 lamp Lamp with globe shape such as type G

ESLED2 ENERGY STAR Screw-in LED Bulb (Decorative non-globe 14 $5 lamp Lamps with non-globe or candle-like shape such as type B C CA F

ESLED3 ENERGY STAR Screw-in LED Bulb and Low Voltage Mini-Reflector Bulbs (DirectionalReflector) 14 $5 lamp ANSI standard PAR and MR type lamps

ESLED4 ENERGY STAR Screw-in LED Bulb (Standard) 14 $5 lamp Lamp such as A series

ESLED5 ENERGY STAR Screw-in LED Bulb (Standard 3-Way) 14 $5 lamp Lamp such as A series with three light levels

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 15

- -LED Screw in Lamps Smart Bulbs

ESLED6 ENERGY STAR Screw-in LED Bulb (Decorative Globe Smart Bulb) 14 $5 lamp Lamp with globe shape such as type G

ESLED7 ENERGY STAR Screw-in LED Bulb (Decorative non-globe Smart Bulb) 14 $5 lamp Lamps with non-globe or candle-like shape such as

type B C CA F

ESLED8 ENERGY STAR Screw-in LED Bulb (DirectionalReflector Smart Bulb) 14 $5 lamp ANSI standard PAR lamps

ESLED9 ENERGY STAR Screw-in LED Bulb (Standard Smart Bulb) 14 $5 lamp Lamp such as A series

LED Tubes (replacing fluorescent)

TLED1 LED Replacement Lamps (Tubes) 2 5 $250 lamp Refer to Lighting Technical Specifications for requirements DLC Type A B and C are eligible bullType B linear (Interior driver) LEDs have the following installation requirements

bullExisting fluorescent ballast must be removed and fixturersquos incoming power wires are connected directly to the lamp sockets Strict adherence to installation instructions is critical when rewiring existing fixtures bullThe LED linear lamps must be delivered as part of a UL 1598C Classified Luminaire Retrofit Kit with instructions explaining the LED linear lamps must be installed on a luminaire that is already UL Listed bullThe retrofitted luminaire must be clearly identified using the label included with the Retrofit Kit indicating that the luminaire has been modified and can no longer operate the originally intended fluorescent lamp(s)

TLED2 LED Replacement Lamps (Tubes) 4 10 $4 lamp

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 16

LED Exterior Lighting

ELED1 ENERGY STAR Integral LED fixture Outdoor Recessed Downlight Retrofit Module 24 $10 module

ENERGY STAR or DLC Qualified fixtures ELED2 ENERGY STAR Integral LED fixture Outdoor Recessed

Downlight 24 $10 fixture

ELED3 LED Outdoor Flood Light Fixtures lt= 5000 LED lumens 50 $10 fixture Typically represents replacement of le175 W Metal Halide or equivalent Fixtures must be DLC qualified

ELED4 LED Outdoor Flood Light Fixtures gt 5000 LED lumens 70 $15 fixture Typically represents replacement of Metal Halide or equivalent greater than 175W Fixtures must be DLC qualified

ELED5 LED PoleArm Mounted Parking and Roadway Fixtures and Retrofit Kits lt= 5000 LED lumens 50 $25 fixture Typically represents replacement of le175 W Metal

Halide or equivalent Product must be DLC qualified

ELED6 LED PoleArm Mounted Parking and Roadway Fixtures and Retrofit Kits Outdoor gt 10000 LED lumens 150 $75 fixture

Typically represents replacement of Metal Halide or equivalent greater than 400W Product must be DLC

listed

ELED7 LED PoleArm Mounted Parking and Roadway Fixtures and Retrofit Kits Outdoor 5001 - 10000 LED lumens 70 $50 fixture

Typically represents replacement of Metal Halide or equivalent greater than 175W and less than 400W

Product must be DLC listed

ELED8 LED Wall Mount Fixtures and Retrofit Kits Outdoor lt= 5000 LED lumens 50 $25 fixture Typically represents replacement of le175 W Metal

Halide or equivalent Product must be DLC qualified

ELED9 LED Wall Mount Fixtures and Retrofit Kits Outdoor gt 5000 LED lumens 70 $50 fixture

Typically represents replacement of Metal Halide or equivalent greater than 175W Product must be DLC

qualified Permanent Fixture Removal

PFRA Indoor Permanent Fixture Removal combined with lighting retrofit na $010 watt removed Incentive only valid when units = ldquofixturerdquo in this table

Incentive is only offered when net lumens are reduced PFRB Outdoor Permanent Fixture Removal combined with lighting retrofit na $010 watt removed

Other LED Lighting LEDEXIT LED Exit Sign

na

$2 sign Replacing Incandescent or Fluorescent

SIGN1A Indoor LED Channel Signage $8 letter

Replacing Neon SIGN1B Outdoor LED Channel Signage $8 letter

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 17

Lighting Controls

CTL Unitary Sensor Controls

na

$1500 sensor

Passive infrared ultrasonic detectors are eligible Includes daylighting controls and all occupancy controls

Controls can be onoff stepped or continuous (dimming) Daylight sensor controls are required to be commissioned in order to ensure proper sensor calibration and energy savings

Minimum of 30 watts controlled per control

CLC Interior Central Lighting Controls $00175

square foot of area

under control

Automated central lighting control systems with override capabilities

This measure includes centrally-controlled time clocks wireless on off switches bi level switches computer based

controls pre-set scene selection dimmable ballasts and on-off dimmer switches for non-personal tuning

Floor plan must be submitted verifying square footage

DAYOCC Controls Combination - Daylighting and Occupancy Fixture Mounted $1500 sensor Minimum of 30 watts controlled per control

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 18

LED Traffic SignalsThis measure applies to the early replacement of existing incandescent traffic lights and pedestrian signals with LEDs New LED traffic signals must comply with ENERGY STAR requirements which can be found at httpswwwenergystargoviapartnersproduct_specseligibilitytraffic_eligpdf98bfshy1786

LED Traffic Signals Incentive Table

Round Traffic Signals 8 Red

Incentive per Signal

$15

8 Yellow 8 Green 12 Red

12 Yellow 12 Green

Turn Arrow Signals

8 Red

$13

8 Yellow 8 Green 12 Red

12 Yellow 12 Green

Pedestrian Signals

9 Pedestrian Only

$13

12 Hand Only 12 Pedestrian Only 12 Countdown Only

12 Pedestrian and Hand Overlay 16 Pedestrian and Hand Side by

Side 16 Pedestrian and Hand Overlay

16 Hand and Countdown Side-by-Side

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 19

Lighting Controls that Exceed Code Requirements

New Construction Lighting SpecificationsUnder the Lighting Power Density Approach the lighting power installed is compared with the lighting power allowed by code Incentives are available for systems where the installed lighting power is lower than the code-allowed power by at least 10 Savings are based on the Lighting Power Density (LPD) calculated on a watts per square foot basis Incentives will be paid only on the area of the building where the lighting installation is complete and is ready for occupancy If a portion of a building is not built-out such that the lighting in an area is not complete and ready for occupancy then that portion is not eligible for an incentive Baseline lighting power density is based on ASHRAE 901- 2007 Either the Space-by-Space or Building Area method may be used to calculate the LPD for the purposes of the incentive

Required Documentation bull Lighting Worksheet bull COMcheck Interior Lighting Report or equivalent analysis demonstrating space-byshy

space or building area calculations bull Reflected ceiling plans and electrical plan sheets showing lighting fixture layout bull Lighting fixture schedule sheet including fixture counts bull Fixture submittal or specification sheets showing model number and rated fixture wattage bull Architectural floor plans displaying floor area affected by proposed lighting installation

New Construction Lighting Incentives Table Lighting Wattssq ft

Improvement over of Code Incentive

gt= 10 and lt 20 $0035sq gt= 20 and lt 30 $007sq ft gt= 30 and lt 40 $0105sq

gt= 40 $021 sq ft

Incentives will be paid on a ($005kWh) custom basis Please contact Program Staff for eligibility of lighting controls for New Construction projects

Interior Occupancy Sensors Incentives are offered for occupancy-based controls in areas where they are not required by code Passive infrared ultrasonic detectors and fixture-integrated sensors or sensors with a combination sensor are eligible All sensors must be hard-wired and control interior lighting fixtures The incentive is per Watt controlled An inventory of the controlled fixtures and their wattage must be provided for each sensor with the Final Application

Daylight Dimming System Incentives are offered for daylight sensor controls in spaces with suitable available ambient light for at least part of the day Light may be through skylights clerestories windows or ldquolight tubesrdquo The controls can be onoff stepped or continuous dimming The onoff controller should turn off artificial lighting when the interior illuminance meets the desired indoor lighting level The stepped controller generally dims the artificial lighting 50 when the interior illuminance levels reach 50 of the desired lighting levels Continuous or dimming controllers dim artificial lighting proportionally to the available ambient light All types of daylight sensor controls are required to be commissioned in order to ensure proper sensor calibration and energy savings

Required Documentation bull Cut sheets or submittals of lighting control systems Reflected ceiling plans or schedule

showing which fixtures are controlled by lighting controls

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 20

New Construction Lighting Power Density CodeRequirements ndash Space by Space Method

Building Specific Space Types LPD (Wft2) Building Specific Space Types LPD (Wft2)

GymnasiumExercise Center AutomotivemdashServiceRepair 07

Playing Area 14 Manufacturing

Exercise Area 09 Low (lt25 ft Floor to Ceiling Height) 12

CourthousePolice StationPenitentiary High (gt25 ft Floor to Ceiling Height) 17

Courtroom 19 Detailed Manufacturing 21

Confinement Cells 09 Equipment Room 12

Judges Chambers 13 Control Room 05

Fire Stations HotelMotel Guest Rooms 11 Fire Station Engine Room 08 DormitorymdashLiving Quarters 11

Sleeping Quarters 03 Museum

Post Office-Sorting Area 12 General Exhibition 10 Convention Center-Exhibit Space 13 Restoration 17

Library BankOfficemdashBanking Activity Area 15 Card File and Cataloging 11 Religious Buildings

Stacks 17 Worship Pulpit Choir 24

Reading Area 12 Fellowship Hall 09

Hospital Retail

Emergency 27 Sales Area [For accent lighting see 93121(c)] 17

Recovery 08 Mall Concourse 17

Nurse Station 10 Sports Arena

ExamTreatment 15 Ring Sports Area 27

Pharmacy 12 Court Sports Area 23

Patient Room 07 Indoor Playing Field Area 14

Operating Room 22 Warehouse

Nursery 06 Fine Material Storage 14

Medical Supply 14 MediumBulky Material Storage 09

Physical Therapy 09 Parking GaragemdashGarage Area 02

Radiology 04 Transportation

LaundrymdashWashing 06 AirportmdashConcourse 06

AirTrainBusmdashBaggage Area 10

TerminalmdashTicket Counter 15

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 21

New Construction Lighting Power Density CodeRequirements ndash Building Area Method

Building Area Type 221 LPD (Wft2)

Automotive facility 09

Convention center 12

Courthouse 12

Dining bar loungeleisure 13

Dining cafeteriafast food 14

Dining family 16

Dormitory 1

Exercise center 1

Gymnasium 11

Health-care clinic 1

Hospital 12

Hotel 1

Library 13

Manufacturing facility 13

Motel 1

Motion picture theater 12

Building Area Type LPD (Wft2)

Multifamily 07

Museum 11

Office 1

Parking garage 03

Penitentiary 1

Performing arts theater 16

Policefire station 1

Post office 11

Religious building 13

Retail 15

Schooluniversity 12

Sports arena 11

Town hall 11

Transportation 1

Warehouse 08

Workshop 14

221 In cases where both a common space type and a building specific type are listed the building specific space type shall apply

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 22

Exterior New Construction LightingExterior New Construction savings over code lighting power density will be incentivized using custom lighting measure at $005kWh rate Participants must submit exterior lighting plans Submittals COMCHECK REPORT and lighting schedule for exterior lighting Savings are calculated from the LPD (Wsq ft) indicated below Additional information may be required based on the building exterior type and space description indicated below To contribute to incentive LEDs must satisfy program requirements for DLC Energy Star or equivalent listing

Required Documentation bull COMcheck Interior Lighting Report or equivalent analysis demonstrating space-by-space or

building area calculations bull Drawings showing lighting fixture layout bull Lighting fixture schedule sheet including fixture counts bull Fixture submittal or specification sheets showing model number and rated fixture wattage

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 23

Building Exterior Space Description LPD

Unco erect Pariki Ilg Area Parlurng ots arnd Drives 0 15 WfW

B i ing Grournds W al 1Yays lless Hlan 11] e 10 Wltirneru- 00

W a Nays 10 middot de or greater 112 W

Plaza a reas

Spec rest re areas

Stainh1ays 1ow 2

B i ing 8ntrames and Exits Ma efilbies m wr near foot of door width

Other doors 2o w 1r ear foot of door width

Ctmqpies and Overhimgs Free starndillg and a ched tmd 12s w m2 m bullerhangs

0 door sales Op en areas (ind udi Ilg ve id e sales 05 W lo )

street frontage far vehicle sales lots 21] W linear toot in addi middot on to open are-0bullmiddot lo~nce

B i ing facades 0 2 W tfl2 middot or eacil illumirnated N311 or surface

o r 5 0 Wllinear root fo r eac h m n inated N3l1 o r

surface length

Automated te lle r rnachmiddot es a lld 210 W per loca tion plus 91] night deposito liies W 1pernddiliorml A I middot per

1oca middot om

Eirltrances and gatehouse inspecliion 125 W ffl2 o middot uncovered slatiaBS a goo~ ed acir ies area

Load ing are-0s or law enforcement 0 5 W 2 of u rnco1bullered area fire ambu rnce and otiher emergency service ibullehmiddotctes

Drive-through w indOWs a taslrood 400 W per drive-Hlrough restaurants

Parking near 24 -h our retail 80111 W per main entry entmn ces

HVAC Equipment Air-Source Air Conditioners and Air-Source Heat Pumps New unitary air conditioning units or air source heat pumps that meet or exceed the qualifying cooling efficiency shown in the HVAC Incentives Worksheet are eligible for an incentive They can be either split systems or single package units The efficiency of split systems is based on an ARI reference number All packaged and split system cooling equipment must meet Air Conditioning and Refrigeration Institute (ARI) standards (210240 320 or 340360) be UL listed use a minimum ozone-depleting refrigerant (eg HCFC or HFC) All required efficiencies are based on the Consortium for Energy Efficiency (CEE) high-efficiency commercial air conditioning and heat pump specifications (wwwcee1org) A manufacturerrsquos specification sheet indicating the system efficiency must accompany the application Disposal of the existing unit

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 24

must comply with local codes and ordinances

Package Terminal Systems (Replacements) Package terminal air conditioners and packaged terminal heat pumps are through-the-wall self-contained units that are 2 tons (24000 Btuh) or less All EER values must be rated at 95degF outdoor dry-bulb temperature

Ductless Mini-Split Heat Pump lt54 Tons Incentives are offered for Ductless Mini-Split Heat Pump lt54 Tons with SEER rating greater than or equal to 120 and EER greater than or equal to 145 and HSPF greater than or equal to 90

Geothermal Heat Pump Geothermal equipment is a high-efficiency groundwater source water source or ground source heat pump system that meets or exceeds the energy efficiency requirements shown in the tables below These measures do not apply to heat pump systems coupled with non-heat pump systems such as chillers rooftop AC units boilers or cooling towers which must be filed as custom measures All HVAC applications other than comfort cooling and heating such as process cooling must also be applied for as custom measures

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 25

HVAC Heating Qualifying Incentive

Equipment Type and Cooling Capacity Cooling Qualifying Efficiency ($ per cooling Measure Code Efficiency

ton)

Air Cooled Air Conditioner

H01 lt 54 tons (lt 65000 Btuhr) 15 SEER NA $22

H02 lt 54 and lt 11 25 tons

125 IEER $22 (lt 65 000 Btuh and lt 135 000 Btuhr) NA

H03 lt11 25 and lt 20 tons

123 IEER NA $22 (lt 135000 Btuh and lt 240000 Btuhr)

H04 lt 20 and lt 6333 tons (~

11 1 IEER NA $22 240000 Btuh and lt 760000 Btuhr)

HOS ~ 6333 Ions (~ 760000 Btuhr) 103 IEER NA $22

Air Cooled Heat Pumps

H06 lt 54 tons (lt 65000 Btuhr) 143 SEER 87 HSPF $30

H07 lt 54 and lt 11 25 tons

123 IEER 3 3 COP $30 (lt 65000 Btuh and lt 135000 Btuhr)

HOS lt11 25 and lt 20 tons

1U IEER 3 2 COP $30 (lt 135000 Btuh and lt 240000 Btuhr)

H09 lt 2000 tons (240000 Btuhr) 105 IEER 3 2 COP $30

Packaged Terminal Systems (PTAC and PTHP) (PTHP only)

H10 lt 8000 Btuhr (lt066 tons) 11 8 EER 33 $17

H11 ~8000 and lt10500 Btuhr (~066 and lt 0875 tons) 11 4 EER 32 $17

H12 gt10500 Btuhr ( 875 tons) 107 EER 31 $17

H22 lt 54 tons (lt 65000 Btuhr) 121 EER 12 3 IEER NA $22

lt 54 and lt 11 25 tons 121 EER 12 3 IEER $22 H23

(lt 65000 Btuh and lt 135000 Btuhr) NA

H24 lt11 25 and lt 20 tons

120 EER 12 2 IEER $22 (lt 135000 Btuh and lt 240000 Btuhr) NA

H25 lt20 and lt 633 tons

119 EER 12 2 IEER $22 (lt 240000 Btuh and lt 760000 Btuhr) NA

H26 ~ 633 tons( lt760000 Btuhr) 110 EER 11 1 IEER NA

$22

HVAC Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 26

Other HVAC EquipmentHotel Guest Room Occupancy Sensor Incentives are offered for occupancy-based controls that control electric air conditioning air source heat pumps and or electric heating units for individual hotel rooms Systems with nonshyelectric heat are not eligible Sensors must be controlled by automatic occupancy detectors or a key-card system and the default setting for controlled units differ by at least 5 degrees (or shut the unit fan and heating or cooling off completely) from the operating set point during unshyoccupied periods The control system may also be tied into other electric loads such as lighting and plug loads to shut them off when occupancy is not sensed The incentive is per room Replacement or upgrades of existing occupancy-based controls are not eligible as a prescriptive incentive

Economizer Integrated Dual Enthalpy Economizer ControlsThis measure is targeted to non-residential establishments whose HVAC equipment is not equipped with a functional economizer

Circulation Fan High-Volume Low-SpeedFans must be greater than 16 feet in diameter and have variable speed control

ECM Circulation Fan This measure is targeted to non-residential customers whose air handling equipment currently uses a SP or PSC fan motor rather than an ECM This measure applies only to circulating fan motors of 1 HP or less Above 1 HP motors are governed by NEMA standards and would see little to no efficiency benefit by adding an ECM The targeted fan can supply heating or cooling only or both heating and cooling

ECM Circulation Pump This measure is targeted for replacement of a shaded pole or permanent split capacitor pump or motor with an electronically commutated pump or motor le75 HP

Retrocomissioning Cooling Systems Confined to chiller plant andor isolated packaged units For reservation must contain proposal with defined scope at equipment level that demonstrates energy savings For final approval required final commissioning report including raw data (TAB reports) demonstrating actual scope

This prescriptive measure can be used for facilities with maximum cooling demand less than 1687 tons Larger systems require the use of custom HVAC measure

Retrocomissioning Whole Building Covers all relevant major mechanical systems such as chiller plant air side systems compressed air andor process systems For reservation must contain proposal with defined scope at equipment level that demonstrates energy savings For final approval required final commissioning report including raw data (TAB reports) demonstrating actual scope

This prescriptive measure can be used for facilities less than 404858 square feet Larger facilities require the use of custom HVAC measure

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 27

Energy Management System For installing a web-based building automation system in existing buildings that currently have no digital automated HVAC controls or have outdated pneumatic control systems with inoperable time control functions Existing HVAC control systems must not have time-of-day scheduling Upgrading obsolete EMS HVAC system with inoperable time clock functions will be reviewed on a case-by-case basis for incentive eligibility This incentive cannot be combined with incentives for programmable thermostats or setback-setup controls Must include the controls strategy and a scaled floor-plan with controlled areas highlighted HVAC BAS systems must be new and include bull Central time clock control bull Web-based interface with PC-based controls and graphic bull Building performance Tracking bull Open-protocol architecture controls system shall consist of either LonTalk (ANSICEA 7091) or BACNet (ASHRAE ANSI 135) protocol being used between all controlled and controlling devices and every node on the network bull Minimum setback period must exceed 2200 hours per year bull A minimum setback space temperature of at least 10degF when heating and 5degF when cooling bull Ability to adjust schedules and settings remotely over the internet bull Report generation describing energy and operating trends

This prescriptive measure can be used for facilities with maximum cooling demand less than 456 tons Larger systems require the use of custom HVAC measure

Demand Controlled Ventilation New ventilation controls must use carbon dioxide levels to measure occupancy and modify the percentage of outside air based on occupancy levels Only buildings with space heating and cooling requirements are eligible Conditioned spaces must be kept between 65ordmF and 75ordmF during occupied operating hours Carbon dioxide sensors must be installed in conjunction with fully functioning motor operated outside air dampers Dual temperature air-side economizers with zone-level CO2 sensors for rooftop units are eligible

This prescriptive measure can be used for facilities with maximum cooling demand less than 2210 tons Larger systems require the use of custom HVAC measure

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 28

Other HVAC Measures- consult project manual for eligibility specifications HVAC

Measure Incentive Unit Quantity Incentive

Measure Code er Unit

H1 8 Hotel Guest Room Occupancy Sensor Room $20

H1 9 Economizer Integrated Dual Enthalpy Economizer Controls Ton $1 5

H20 Circulation Fan High-Volume Low-Speed Unit $30

H21 ECM Circulation Fan Fan $1 5

H27 ECM Circulation Pump Pump $50

H28 Retrocommissioning Cooling Systems

Ton $750

H29 Retrocommissioning Whole Buidling

Square Foot $010

H29 Energy Management System Ton $2500

H30 Demand Controlled Ventilation Ton $2500

Other HVAC Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 29

Unitary HVAC Chillers

Air-Cooled Chillers Water Cooled Positive Displacement Reciprocating Chillers and Water Cooled Centrifugal Chillers Chiller applications including existing multiple chiller configurations (including redundant or lsquostand-byrsquo chillers) existing chillers serving multiple load groups and chillers in industrial applications are defined as non-standard applications and must follow a site-specific custom protocol $005kWh) rate

Incentives are offered for chillers with an IPLV value (expressed in kW per ton) that is less than or equal to the qualifying efficiency shown in the table below The chiller efficiency rating must be based on ARI Standard 550590-2003 for IPLV conditions The chillers must meet ARI standards 550590-2003 be UL listed and use a minimum ozone-depleting refrigerant (eg HCFC or HFC) The ARI net capacity value should be used to determine the chiller tons A manufacturerrsquos specification sheet with the rated kWton-IPLV or COP-IPLV must accompany the application along with the four point performance data that is the basis for the IPLV The application must include a certification that the chiller is appropriately sized for site design load conditions

Chillers must satisfy efficiency requirements for both full load and IPLV efficiencies for either Path A or Path B The table shows the minimum efficiency ratings to qualify for the prescriptive incentive which must be consistent with the expected operating conditions of the efficient chiller For example if the efficient chiller satisfies Path A and generally performs at part load the appropriate baseline chiller efficiency is the IPLV value under Path A If the efficient chiller satisfies Path B and generally performs at full load the appropriate baseline chiller efficiency is the full load value under Path B Generally chillers operating above 70 percent load for a majority (50 or more) of operating hours should use Path A and chillers below 70 load for the majority of operating hours should use Path B

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 30

C3 lt 75 tons

C4 75 tons and lt 150 tons

cs ~ 150 tons and lt 300 tons C6 ~ 300 tons

Water Cooled Centrifugal Chillers C7 lt 300 tons CB ~ 300 tons and lt 600 tons

C9 ~ 600 tons

Path A

Qualifying Full Load Efficiency

Qualifying IPLV Efficiency

Path B

Qualifying Full Load Efficiency

Qualifying IPLV Efficiency

0780 kWton 0567 kWton 0800 kWton 0540 kWton

0775 kWton 0554 kWton 0790 kWton 0527 kWton

0680 kWton 0522 kWton 0718 kWton 0486 kWton 0620 kWton 0486 kWton 0639 kWton 0441 kWton

0634 kWton 0536 kWton 0639 kWton 0405 kWton 0576 kWton 0494 kWton 0600 kWton 0360 kWton

0570 kWton 0494 kWton 0590 kWton 0360 kWton

I

Incentive ($ton)

$17

$17

Unitary Chiller Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 31

Refrigeration

Anti-Sweat Heater Controls Incentives are offered for devices that sense the relative humidity in the air outside of the display case and cycles or turns off the glass door (if applicable) and frame anti-sweat heaters when the ambient dew point is below a preset set point Technologies that can turn off anti-sweat heaters based on sensing condensation (on the inner glass pane) also qualify Incentive is based on the number of doors

Evaporator Fan Controls This measure is for the installation of controls in medium temperature walk-in coolers The controller reduces airflow of the evaporator fans when there is no refrigerant flow The measure must control a minimum of 120 HP where fans operate continuously at full speed The measure also must reduce fan motor power by at least 75 during the off cycle This measure is not applicable if any of the following conditions apply 1) Compressor runs all the time with high duty cycle 2) Evaporator fan does not run at full speed all the time 3) Evaporator fan motor runs on poly-phase power 4) Evaporator fan motor is not shaded-pole or permanent split capacitor (PSC) 5) Evaporator fan does not use off-cycle or time-off defrost

Floating Head Pressure Controls Controls must vary head pressure to adjust condensing temperatures in relation to outdoor air temperature Must replace existing constant pressure or manually controlled systems to achieve reduced head pressure in order to maintain a minimum saturated condensing temperature of 70 degF or a 20 degF variance below design heat pressure during mild weather conditions Compressor size must be at least 5 HP

Automatic Door Closers for Walk-In Coolers and Freezers The auto-closer should be applied to the main insulated opaque door(s) of a walk-in cooler or freezer The auto-closer must be able to firmly close that door when it is within one inch of full closure This must be a newly installed automatic door closer replacements on previously installed door closers are not eligible for an incentive

EC Motor for Walk-inReach-in Refrigerated cases or Freezer cases Incentives are offered for replacement of an existing standard-efficiency shaded-pole or permanent split capacitor evaporator fan motor in refrigerated display cases or fan coil in walk-ins The replacement unit must be an Electronically Commutated Motor (ECM) This measure cannot be used in conjunction with the Evaporator Fan Controller measure

ENERGY STAR Solid Door Freezer and Glass Door Freezer and Refrigerators Incentives are offered for replacement of existing self-contained refrigerators and freezers with units that are ENERGY STARreg listed Only units with built-in refrigeration systems are qualified Units with remote refrigeration systems or units do not qualify Customers must provide proof that the appliance meets the CEE or ENERGY STAR efficiency specifications using ASHRAE Standard 72-2005 (38degF plusmn 2degF) Incentive is per unit

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 32

Refrigeration Suction Pipe Insulation 1 Must insulate bare refrigeration suction lines of 1 58 inches in diameter or less on existing equipment only 2 Cooler lines require frac34 inch of flexible closed-cell nitrite rubber or an equivalent insulation 3 Freezer lines require 1-inch of flexible closed-cell nitrite rubber or an equivalent insulation 4 Insulation exposed to the outdoors must be protected from the weather (ie jacketed with a medium-gauge aluminum jacket)

Night Cover 1 Must install a cover on an existing open refrigerated display case to decrease its cooling load during off hours 2 The equipment manufacturer must not object to the use of night covers for the existing display case model 3 This rebate is based on the linear footage of the installed 4 The cover must be applied for a period of at least six hours

Strip Curtain on Walk-In CoolerFreezer 1 New strip curtains or plastic swinging doors must be installed on doorways of refrigerated spaces (conditioned to less than 50deg F) 2 Rebate is based on the linear footage of the doorway that the strip curtains are being installed in 3 Opening between the strip curtain and bottom of doorway must be no larger than 1 inch 4 Strips must have an overlay greater than 1 inch

Evaporator Coil Defrost Control 1The current system must include an operating electric defrost system with a functional electroshymechanical time clock 2 Evaporator coil temperature and pressure must be monitored by controller in order to determine optimal defrost cycles 3 New intelligent control systems to control the defrost systems will typically replace timed- defrost controls

Variable Speed Refrigeration Compressor This measure VSD control for refrigeration systems and its eligibility targets applies to retrofit construction in the commercial and industrial building sectors it is most applicable to grocery stores or food processing applications with refrigeration systems This protocol is for a VSD control system replacing a slide valve control system

Add Doors to Open Refrigerated Cases The eligible retrofit equipment is either no sweat doors or doors with anti-sweat heaters If a lighting retrofit is included with the new doors it must consume the same amount of energy or less energy than the old lighting Upgrades to lighting or other system components should be processed separately Horizontal cases are not eligible and should be processed as custom

Door Gaskets PECO Smart Ideas For Your Business CampI Program Application Manual

Q1 2017 pg 33

This measure is applicable to commercial refrigeration and applies to the replacement of worn-out gaskets with new better-fitting gaskets Applicable gaskets include those located on the doors of walk-in andor reach-in coolers and freezers This protocol applies to the main doors of both low temperature (ldquofreezerrdquo ndash below 32 degF) and medium temperature (ldquocoolerrdquo ndash above 32 degF) walk-ins

Zero Energy Doors For this measure a no-heatlow-heat clear glass door must be installed on an upright display case It is limited to door heights of 57 inches or more Doors must have either heat reflective treated glass be gas filled or both This measure applies to low temperature cases onlymdashthose with a case temperature below 0degF Doors must have 3 or more panes Total door rail glass and frame heater amperage ( 120 volt) cannot exceed 039413 amps per door for low temperature display cases Rebate is based on the door width (not including case frame)

Air Cooled Refrigeration Condenser Approach temperature lt8F for low temperature loads lt13F for medium temperature loads

Oversized Condenser with VFD New standalone condenser must no more than 150 larger than load

Case Light Occupancy Controls Acceptable for freezer or refrigerated cases as well as open cases or cases with doors

LED Open Case Lighting For replacing open case T8 or T12 fluorescent fixtures with DLC listed LEDs on refrigerators coolers and freezers

LED Enclosed Case Lighting Refrigerated LED case lighting with or without motion sensors on enclosed refrigerated vertical displays The baseline equipment is assumed to be cases with uncontrolled T8 or T12 linear fluorescent lamps

LED Enclosed Case Lighting Freezer LED case lighting with or without motion sensors on enclosed freezer vertical displays The baseline equipment is assumed to be cases with uncontrolled T8 or T12 linear fluorescent lamps

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 34

Refrigeration Measures Ref Measure

Measure Incentive Unit IncentiveUnit Code R01 Anti-Sweat Heater Controls Door $30

R02 Evaporator Fan Controls Controller $50

R03 Floating-head Pressure Controls HP $20

R04 Automatic Door Closers fo r Walk-in Coolers Door $75

R05 Automatic Door Closers fo r Walk-in Freezers Door $75

R06 Evaporator Fan EC Motor fo r Reach- in Cases Motor $35

RO Evaporator Fan EC Motor fo r Walk-in Cases Motor $50

R08 ENERGY STARreg Glass Door Freezer lt15 Cu Ft Unit $100

R09 ENERGY STARreg Glass Door Freezer 15- 49 Cu Ft Unit $125

R10 ENERGY STARreg Glass Door Freezer ~ 50 Cu Ft Unit $145

R11 ENERGY STARreg Solid Door Freezer Unit $75

R12 ENERGY STARreg Glass Door Refrigerator lt50 Cu Ft Unit $30

R13 ENERGY STARreg Glass Door Refrigerator gt= 50 Cu Ft Unit $50

K14 t NtKGY ~ I AKreg ~Olld Uoor Ketngerator $ OU Cu t-t Unit $~0

R15 Suction Pipe Insulation Walk-in Coolers Linear Foot $050

R16 Suction Pipe Insulation Walk in Freezers Linear Foot $075

R17 Night Cover Linear Foot $800

R18 Strip Curtains on Walk-in Cooler Linear Foot $250

R19 Evaporator Coil Defrost Control Controller $7500

R20 Variable Speed Refrigeration Compressor Compressor $85

R21 Add Doors to Open Refrigerated Cases Door $55

R22 Door Gaskets Door $250

R23 Zero Energy Doors Door $50

R24 A ir Cooled Refrigeration Condenser Ton $10

R25 Oversized Condenser with VFD Ton $10

R26 Case Light Occupancy Controls Door $8

R27 LED Open Cose Lighting Cose $10

R28 LED Enclosed Case Lighting Refrigerated Door $30

R30 LED Enclosed Case Lighting Freezer Door $30

Refrigeration Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 35

Food Service Beverage and Snack Machine Controls Incentives are offered for refrigerated vending machines that contain non-perishable bottled and canned beverages Controller for both types of systems must include a passive infrared occupancy sensor to turn off fluorescent lights and other energized machine systems when the surrounding area is unoccupied for 15 minutes or longer For the refrigerated machines the control logic may include periodic power up at 2-hour intervals or longer to maintain product temperature and provide compressor protection

ENERGY STARreg Refrigerated Beverage Vending Machines Incentives are offered for ENERGY STARreg beverage vending machines Qualifying machines can be found at httpswwwenergystargovproductsothervending_machines

ENERGY STARreg Electric Steam Cooker This measure applies to the installation of electric ENERGY STAR steam cookers as either a new item or replacement for an existing unit Gas steam cookers are not eligible The steam cookers must meet minimum ENERGY STAR efficiency requirements A qualifying steam cooker must meet a minimum cooking efficiency of 50 percent and meet idle energy rates specified by pan capacity

ENERGY STARreg Electric Combination Oven This measure applies to electric ovens capable of handling single 12 x 20 x 25 pan per rack

ENERGY STARreg Commercial Convection Oven The oven must meet or exceed heavy load potato cooking energy efficiency of greater than 70 utilizing ASTM Standard F149 Applies only to electric ovens

ENERGY STARreg Commercial Fryers The commercial fryer must have a tested heavy load (French fry for large vats) cooking energy efficiency of greater than 80 utilizing American Society for Testing and Materials (ASTM) Standard F1361 for commercial fryers and ASTM Standard F2144 for large vat fryers Multiple vat configurations are paid per qualifying vat ENERGY STAR maintains a list of qualifying products and specifications at httpwwwenergystargov

ENERGY STARreg Commercial Hot Holding Cabinet Energy STAR rating electric

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 36

Food Service amp Other Measures FoodOther

Measure Incentive Unit Incentive

Measure Code Unit

F01 Beverage Machine Controls Unit $25

F02 Snack Machine Controls Unit $20

F03 ENERGY STARreg Refrigerated Beverage Vending Machir Unit $125

F04 ENERGY STARreg Commerc ial Steam Cooker Unit $200

F05 ENERGY STARreg Electric Combination Oven Unit $200

F06 ENERGY STARreg Commercial Electric Convection Oven Unit $150

F07 ENERGY STARreg Commerc ial Fryers Unit $100

F08 ENERGY STARregCommerc ial Hot Holding Cabinet Unit $200

Food Service Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 37

Motors and Variable Frequency DrivesEarly Replacement Motors For constant speed and uniformly loaded motors this measure applies to the replacement of old motors with new energy efficient motors of the same rated horsepower Old motors must be less than 15 years Replacements where the old motor and new motor have different horsepower ratings are considered custom measures Motors with variable speeds variable loading or industrial-specific applications are also considered custom measures

Motors Incentive Table Motors

Measure Code

HP Incentive per Motor

M01 15 - 10 $40 M02 11 - 50 $100 M03 51-100 $150 M04 gt100 $300

Only VFDs on unitary systems are eligible Non-unitary systems must be submitted as a custom measure Soft start motors are not eligible

Variable Frequency Drives on HVAC Fan Applications Incentives are offered for installing VFDs on existing HVAC fans that do not have pre-existing VFDs This measure applies to HVAC supply and return fans only All other fans including cooling tower fans must be submitted as custom measures Manually fixed speed settings on HVAC fans must be submitted via custom application The VFD must control motor speed automatically in response to pressure flow temperature or other variable signal The installation of a VSD must accompany the permanent removal or disabling of any throttling devices such as inlet vanes bypass dampers and throttling valves etc The incentive is offered per controlled HP

Variable Frequency Drives on Pump Applications Incentives are offered for installing VFDs on existing chilled water pumps and heating hot water pumps that do not have existing VFDs This measure applies to chilled water pumps and heating hot water pumps only All other pumps must be submitted as custom measures Manually fixed speed settings on pumps must be submitted via custom application The VFD must control motor speed automatically in response to pressure flow temperature or other variable signal The installation of a VSD must accompany the permanent removal or disabling of any throttling devices such as throttling valves The incentive is offered per controlled HP

Variable Speed Control for Kitchen Exhaust Hoods The measure consists of installing a new VSD in conjunction with a sensor control system that varies the exhaust rate of kitchen ventilation (exhaust andor makeup air fans) based on the heat and effluent output from the cooking appliances (ie the more heat and smokevapors generated the more ventilation needed) This involves installing a temperature sensor in the hood exhaust collar andor an optic sensor on the end of the hood that senses cooking conditions and allows the system to automatically vary the rate of exhaust to match requirements by adjusting the fan speed accordingly

Variable Speed Drives for Process or Other Equipment VFD must be used in conjunction with a process (non HVAC) application To qualify for this incentive the driven equipment must operate at least 2000 hours per year Redundant or back- up units do not qualify VFDs replacing existing VFDs do not qualify The VFD must control motor

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 38

speed automatically in response to pressure flow temperature or other variable signal VFDs installed as ldquosoft startrdquo without automatic manual closed loop speed control do not qualify The installation of a VFD must accompany the permanent removal or disabling of any throttling devices such as throttling valves The incentive is per controlled HP and only applies to controlled motors less than 50 HP

VSDVFD Incentives Table VFD

Measure Code

Measure Unit Incentive per Unit

Fan Application

V01 VFD on HVAC Fan HP $25 Pump Application

Variable Speed Control for Kitchen Exhaust Hoods

Variable Speed Drives for Process or Other Equipment

V02 VFD on Chilled Water Pumps HP $25 V03 VFD on Heating Hot Water Pumps HP $25

V04 Kitchen Exhaust Fan Retrofit Hood HP $500

V05 Process Motor lt 50 HP HP $50

Domestic Hot Water Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater This measure documents the energy savings attributed to converting from a standard electric water heater to an ENERGY STAR natural gaspropane-fired water heater or a standard oil-fired water heater with an Energy Factor of 0585

Heat Pump Water Heater This includes heat pump water heaters with energy factors meeting ENERGY STAR criteria The measure described here involves a direct retrofit of a resistive electric water heater with a heat pump water heater It does not cover systems where the heat pump is a pre-heater or is combined with other water heating sources More complicated installations can be treated as custom projects

Low Flow Pre-Rinse Spray Valve This measure applies to efficient low flow pre-rinse sprayers in grocery and food service applications The most likely areas of application are kitchens in restaurants and hotels Only premises with electric water heating may qualify for this incentive In addition the replacement pre-rinse spray nozzle must use less than 16 gallons per minute with a cleanability performance of 26 seconds per plate or less Low flow pre-rinse sprayers reduce hot water usage and save energy associated with water heating

Domestic Hot Water Incentive Table

Measure Code Measure Unit Retrofit Incentive per

Unit

W01 Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater Unit $100

W02 Heat Pump Water Heater Unit $100 W03 Low-Flow Pre-Rinse Spray Valve Valve $17

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 39

Compressed Air SystemsNo-loss Condensate Drain No-loss Condensate Drains are controlled by a sensor that monitors the level of condensate and only open when there is a need to drain condensate They close before compressed air is allowed to escape This measure is targeted to non-residential customers whose equipment is a timed drain that operates on a pre-set schedule Acceptable baseline conditions are compressed air systems with standard condensate drains operated by a solenoid and timer

Air-Entraining air nozzle This measure is targeted to non-residential customers whose compressed air equipment uses stationary air nozzles in a production application with an open copper tube of 18rdquo or 14rdquo orifice diameter Energy efficient conditions require replacement of an inefficient non-air entraining air nozzle with an energy efficient air-entraining air nozzle that use less than 15 CFM at 100 psi for industrial applications

Storage Tanks for LoadNo Load Screw Compressors This measure protocol applies to the installation of air receivers with pressureflow controls to loadno load compressors Loadno load compressors unload when there is low demand The process of unloading is done over a period of time to avoid foaming of the lubrication oil Using a storage tank with pressureflow control will buffer the air demands on the compressor Reducing the number of cycles in turn reduces the number of transition times from load to no load and saves energy The baseline equipment is a loadno load compressor with a 1 galcfm storage ratio or a modulating compressor with blowdown The high efficiency equipment is a loadno load compressor with a minimum storage ratio of 4 gallons of storage per cfm

Cycling Refrigerated Thermal Mass Dryer When air is compressed water vapor in the air condenses and collects in liquid form Some of this condensate collects in the air distribution system and can contaminate downstream components such as air tools with rust oil and pipe debris Refrigerated air dryers remove the water vapor by cooling the air to its dew point and separating the condensate Changes in production and seasonal variations in ambient air temperature lead to partial loading conditions on the dryer Standard air dryers use a hot gas bypass system that is inefficient at partial loads A Cycling Thermal Mass Dryer uses a thermal storage medium to store cooling capacity when the system is operated at partial loads allowing the dryer refrigerant compressor to cycle

This measure is targeted to non-residential customers whose equipment is a non-cycling refrigerated air dryer with a capacity of 600 cfm or below Acceptable baseline conditions are a non-cycling (eg continuous) air dryer with a capacity of 600 cfm or below The replacement of desiccant deliquescent heat-of-compression membrane or other types of dryers does not qualify under this measure

Variable Speed Air Compressor This type of compressor uses a special drive to control the speed (RPM) of the unit which in turn saves energy compared to a fixed speed equivalent

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 40

No-loss Condensate Drain Air-Entraining Air Nozzle Cycling Refrigerated Thermal Mass Dryer

Compressor Incentive per

Equipment Type Units Quantity Daily Operating Unit

Hours

CA04 Storage Tanks for LoadNo Load Screw

Compressor HP $10 Compressors

CA05 Variable Speed Air Compressor

Compressor HP $30

CA06 Compressed Air System Optimization

Compressor HP $50

Compressed Air System Optimization The submitted optimization measures must be identified in an Air System Audit or equivalent study to be eligible The measures must demonstrate energy savings as evaluated by a Program Engineer Additionally measures must also fall under one or more of the category below to be eligible

1) Install storage Receivers (new receivers only replacing existing storage receivers are ineligible)

2) Compressor control (must demonstrate improvement in partial load efficiency of the compress air system including reduceeliminate partially loaded units)

3) Dryer control 4) Source pressure reduction 5) Right-sizing distribution components such as piping filters regulators

connectors and hoses (routine maintenance replacements are ineligible) 6) Leakage detection and repair 7) Eliminate low-efficiency end-usages of compressed air 8) Heat recovery (most reduce electricity consumption of the replaced heat source)

Compressed Air Systems Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 41

lt65000 Btuh

~ 65000 Btuh and lt135000 Btuh

135000 Btuhand lt240000 Btuh

240000 Btuh and lt760000 Btuh

760000 Btuh

154

142

135

125

123

Chiller Capacity Path APath B efficiency (kWton )

lt 150 tons

~150 tons and lt300 tons

300 tons and lt400 tons

400 tons and lt600 tons

600 tons

lt75 tons

~75 tons and lt150 tons

~150 tons and lt300 tons

~300 tons and lt600 tons

600 tons

0610 FU0695 FL and 0550 IPLV0440 IPLV

0610 FU0635 FL and 0550 IPLV0400 IPLV

0560 FU0595 FL and 0520 IPLV0390 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

Path APath B efficiency (kWton )

0750 FU0780 FL and 0600 IPLV0500 IPLV

0720 FU0750 FL and 0560 IPLV0490 IPLV

0660 FU0680 FL and 0540 IPLV0440 IPLV

0610 FU0625 FL and 0520 IPLV0410 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

Data Centers Data Center incentives are available for facilities ranging in size from office server closets to large standalone facilities

Air Cooled Chiller Path APath B EER (BtuWh) lt150 tons 101 FL97 FL and 137 IPLV158 IPLV ge150 tons 101 FL97 FL and 140 IPLV161 IPLV

Air Cooled Chiller without Condenser Air-cooled chillers without condenser must be rated with matching condensers and comply with air-cooled chiller efficiency requirements

Computer Room Air Conditioner

Computer Room Air Handler Variable Speed Replacing constant speed CRAH with VSD CRAH

Water Cooled Centrifugal Chiller

Water Cooled Positive Displacement or Reciprocating Chiller

Uninterruptible Power Supply Must be Energy Star Certified UPS or have full load efficiency rating

ge948 for 20-100 kVA ge978for ge100 kVA

Mainframe Refresh The rated efficiency of the replacement Mainframes power supply must be at least 8 more

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 42

- Equipment Type Units IncentiveUnit

D1 Air Cooled Chiller Ton $4000 D2 Air Cooled Chiller W ithout Condenser Ton $2000 D3 Computer Room Air Conditioner Ton $3000 D4 Computer Room Air Handler Variable Speed Ton $1000 D5 Water Cooled Centrifugal Chiller Ton $3000 D6 Water Cooled Positive Displacement or Reciprocatin $3000 D7 Uninterruptible Power Supply 20-100 kVA $1000 D8 Uninterruptible Power Supply gt 100 kVA $1000 D9 Mainframe Refresh $2000

D10 Server Refresh $2000 D11 PC Power Managment System $600 D12 HVAC System Optimization $005 D1 3 HoUCold Aisle Containment kWh saved $005 D14 Server Virtualization kW reduction $40000 D1 5 Thin Clients Units $500

efficient compared to the existing Mainframes power supply The replacement Mainframe if Inactive must be decommissioned and removed from the Data Center

Server Refresh Replacement servers must be ENERGY STARreg certified Replacement servers power supply must be 5 more efficiency compared to the power supply of the replaced servers The replaced server must be decommissioned and removed from the data center

HVAC System Optimization Final system must have these features

-Implementation of free cooling by the addition of an economizer system -Conversion of constant speed CRACCRAH into variable speed operations using VFDs and additional control functionalities and -Elevation of exhaust air temperature

HotCold Aisle Containment Includes both Hot and Cold Aisles Installing new containment measures not replacing already existed aisle containment Plenum-only installations not eligible Must result in higher difference between the return air (hot aisle) and supply air (cold aisle) temperatures measured at rack intake and exhaust locations

Server Virtualization Minimum of consolidating 5 Servers virtualized into one Server The virtualized servers if inactive are removed from the Data Center

Thin Clients Must be ENERGY STAR certified thin clients Decommissioned clients are removed from the Data Center

Data Center Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 43

Whole Building Systems Whole Building Systems Approach

The Whole Building Systems approach is intended to encourage integrated energy efficient designs by providing enhanced incentives to the customer who addresses overall energy performance Owners of eligible and qualifying new construction and major renovation projects can receive Whole Building Systems incentives when energy modeling indicates the projectrsquos performance is over 10 better than the ASHRAE 901-2007 Savings from eligible electric end-uses in kilowatt hours define the amount of financial incentive Energy savings achieved through renewable energy sources are not counted toward project energy savings and are not included in the savings basis Incentive reservations obtained during the design phase of a project will be honored for up to 24 months

How to Apply for Whole Building Systems Incentives Before construction begins bull A Pre-notification Application must be submitted documenting the Owners intention to

seek Whole Building Systems incentives bull The Owner must confirm the goals and energy efficiency strategies being pursued by the

design team on the completed Pre-notification Worksheet (Checklist tab) and in the project Summary (Whole Building Performance Summary tab)

bull Submit executable building modeling software files bull Submit the Whole Building Performance Summary worksheet energy simulation model

inputs and outputs and supporting documentation bull Receive confirmation and eligibility notification from the PECO Smart Ideas team and

receive an incentive reservation bull The final incentive paid may differ from the reserved incentive amount The final

incentive will be calculated based on site-verified equipment installation and performance The Owners final application and complete documentation must be received within 6 months of equipment installation or certificate of occupancy whichever is later

bull An executable energy model and model output demonstrating compliance with the criteria of ASHRAE 901-2007 Appendix G will be required and the equipment data sheets LED lighting fixtures must be on the DLC or Energy STAR qualified products list (QPL) to be eligible LED fixtures not on the DLC or Energy STAR QPL has the option of submitting LM79 and LM80 test reports for evaluation against DLC and Energy STAR eligibility criteria

During the construction period bull Owner and design team continue to work closely with their chosen contractor to assure

energy efficiency measures are included and installed in the completed building

When the building is constructed and operational bull Complete the Owner final application Request an equipment verification site visit by the

PECO Smart Ideas team Equipment must be installed and fully operational o Program staff will schedule a site visit and utilize submitted documentation and

measurement tools to verify that the installation follows the submitted energy simulation model

bull When PECO confirms that there are no significant changes to the installed equipment payment of the reserved incentive will be made to the Owner within 6 weeks

bull If changes from the proposed design energy simulation are found the Owner and design team will be notified of the reduced incentive amount a period of 20 calendar days will

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 44

Improvement Incentive per Sq Ft

over Code

~11 to lt20 $0155

~20 to lt30 $0233

~30 to lt40 $0350

~40 to lt60 $0525

~60 $0700

be allowed for supplemental information to be provided if no additional information is received by PECO Smart Ideas team the reduced incentive payments will be made and sent to the Owner if additional clarification and information is available program staff will work diligently to resolve the discrepancies and arrive at a reasonable incentive adjustment with the customer

Payments made by PECO Smart Ideas are final

Customer Eligibility The Owner of the proposed new building project must be a customer of PECO and receive delivery of electric service from PECO to receive kilowatt-hour based incentives Please note that electricity supply can be provided by any vendor

Project Eligibility bull The project must be a new construction or major renovation Major renovations involving

the removal and redesign of at least two building systems (such as interior lighting and mechanical systems) may apply for Whole Building Systems incentives

bull To qualify for incentives projects must demonstrate energy efficiency enhancements that achieve at least 11 improvement in the proposed design versus the standard baseline

bull The Owner must submit a Pre-approval Application to the program at the stage where changes for increased energy efficiency are still feasible and construction has not been completed

bull Projects receiving Whole Building Systems incentives are not eligible to receive other incentives such as the prescriptive or custom program incentives for the same scope

bull Project components that are NOT eligible for consideration as a basis for PECO Smart Ideas include the following o Alternative fuel sources (eg use of gas or oil equipment in lieu of electric) Please note

that combined heat and power (CHP) systems will be incentivized for the electricity they produce

o Renewable energy sources (eg solar wind biomass) bull Ineligible savings include exterior lighting process receptacle miscellaneous loads and

other unregulated end-uses Custom incentives are available for new construction exterior lighting

Whole Building Systems Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 45

Custom Project Specifications Instructions for Energy Savings Calculations for Custom Projects Custom projects must involve measures that result in a reduction in electric energy use (kWh) Electricity savings may result from either efficiency improvements or fuel switching Custom Incentives are based on the first year kilowatt-hour savings Custom applications must be accompanied by detailed engineering calculations that document the annual total energy savings

The following serve as guidelines for the minimum required documentation

Equipment Information Submittals bull A list of the present and proposed equipment and components to be installed

including manufacturerrsquos catalogmodel number bull Manufacturerrsquos specification sheets showing capacities and performance for all major

components

Energy Savings Calculations Provide calculations documenting the predicted energy consumption of the existing (or baseline) and proposed system using appropriate analytical tools and clearly stated assumptions Calculations may be performed by ldquohandrdquo but spreadsheet analysis or more rigorous modeling is preferred All analysis should be provided in electronic format All assumptions such as operating hours existing and proposed equipment operational details must be presented Engineering algorithms and procedures from recognized technical organizations such as ASHRAE SMACNA ANSI etc must be used Use rated performance factors tested under accepted procedures specified by recognized rating agencies such as AHRI ANSI ASTM etc Provide an explanation when equipment performance rating conditions vary from standard conditions

In support of the calculations extensive documentation must be provided that provides the basis for the savings estimates The documentation must provide information on the equipment operating schedule daily and seasonal load profile and baseline AND energy efficient equipment performance at the operating loads Typical documentation for custom projects often includes bull Engineering or architectural drawings and ldquoequipment schedulerdquo sheets bull Component specification sheets that include part load efficiency or performance

factors bull Spreadsheet calculations or inputoutput files and results from system modeling or

other engineering analysis using accepted engineering algorithms and practices bull Log sheets trend logs from a building management system or other operating

documentation that are often necessary to document operating hours and equipment loading and used as a basis for the calculations (in some cases short term monitoring may be required to document the load profile)

bull Control sequence of operations that are necessary where controls play a part in the savings equation

Additional documentation other than that described in the application may be required for program participation Larger projects may also require pre- and post-project sub metering or monitoring of loads andor power input as part of another measurement and verification activity to demonstrate the actual energy savings that are realized

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 46

Baseline for Custom Analysis Where equipment is replaced prior to the end of its rated service life in order to achieve energy savings the existing equipment performance may be used as the baseline in the energy savings calculations Where equipment is replaced due to failure or for other reasons (such as obsolescence or a need for more capacity) the baseline performance used in the savings calculation should be either the minimum performance that would be required by code for that equipment type and application (where a code applies) or the performance of the equipment that would have been selected as the customers standard practice when a code does not apply

Baseline or Existing System Summary On custom worksheet on application form include make model number name plate information (such as operating voltage and rated full load amps) rated capacity quantities equipment condition and age facility operating hours equipment operating schedule and load curves If needed attach separate sheets

All decisions regarding incentives for custom projects are in the sole discretion of PECO

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 47

APPENDIX PROGRAM UPDATES SUMMARY (Q1 2017) Multifamily Nursing Home and Assisted Living retrofit customers need to apply for incentives through the PECO Smart Ideas Multi-Family Program administered by Franklin Energy For more information please contact Taylor Adler at tadlerfranklinenergycom or call 1-844-4BIZ-SAVE Multifamily Nursing Home and Assisted Living new construction customers can proceed with applying for incentives here

Revised Incentives

Data Centers

Measure Incentive Effective Immediately Previous Incentive

Air-cooled chiller for data centers $40ton $10ton Air-cooled chiller without condenser for data centers $20ton $10ton

Computer room air conditioner $30ton $7ton Water-cooled centrifugal chiller for data centers $30ton $5ton Water-cooled positive displacement or reciprocating chiller for data centers

$30ton $5ton

Uninterruptible power supply 20-100 kVA $10kVA $6kVA Uninterruptible power supply gt100 kVA $10kVA $1kVA Mainframe refresh $20kW installed $5kW installed Server refresh $20kW installed $4kW installed Server virtualization $400kW reduction $4kW reduction Thin clients $5units $4units

Lighting (Effective Immediately)

Measure Incentive Effective Immediately Specification Previous

Incentive Specification

New construction exterior LED outdoor flood light LED parking garage and canopy lighting LED polearm mounted parking and roadway lighting LED wall mount fixture

$005kWh (custom)

Lighting Power Density (LPD) Requirements Unchanged

$10-54 fixture

Lighting Power Density (LPD) (Wft2) by Space Type or Building Area

LED Replacement Lamps (Tubes) 2

$250lamp 5 Min Watts Reduced

$250lamp 6 Min Watts Reduced

LED Replacement Lamps (Tubes) 4

$400lamp 10 Min Watts Reduced

$400lamp 12 Min Watts Reduced

Permanent Fixture Removal $010Watt removed

Clarification of calculation to represent actual Wattage removed

$010Watt removed

Lighting (Effective 6117)

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 48

Measure Incentive Effective 6117 Specification Previous

Incentive Previous Specification

Interior LED high-bay fixtures andor retrofit kits if lt 20000 LED Lumens

$50fixture 150 Min Watts Reduced

$75fixture 150 Min Watts Reduced

Interior LED high-bay fixtures andor retrofit kits if gt 20000 LED Lumens

$75fixture 225 Min Watts Reduced

$75fixture 150 Min Watts Reduced

New Incentives

Compressed Air

Measure New Incentive Effective Immediately Variable speed air compressor $30compressor HP Compressed air system optimization $50compressor HP

HVAC

Measure New Incentive Effective Immediately ECM circulation pump $50pump Retro-commissioning cooling systems $750ton Retro-commissioning whole building $010square foot Energy management system $25ton Demand controlled ventilation $25ton Water-cooled air conditioner $22ton

Food Service

Measure New Incentive Effective Immediately Combination oven $200unit ENERGY STARreg commercial convection oven $150unit ENERGY STARreg commercial fryers $100unit ENERGY STARreg commercial hot holding cabinet $200unit

Refrigeration

Measure New Incentive Effective Immediately Air-cooled refrigeration condenser $10ton Oversized condenser with VFD $10ton Case light occupancy controls $750door

Lighting

Measure New Incentive Effective Immediately Interior central lighting controls $00175sq foot

Motors and Drives

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 49

-

Measure New Incentive Effective Immediately VFD for dust collection system motor $50HP

Application Clarifications and Revised Requirements

Clarification of LED Eligibility for New Construction or Retrofit Projects

LED Eligibility is determined by whether lighting products are listed in either the DesignLights Consortium (DLC) Qualified Products List of commercial-grade LED luminaires or the US Environmental Protection Agency database of ENERGY STAR certified products For products not yet listed contractors may submit LM79 and LM80 test reports PECO Smart Ideas engineers will review test reports to determine if the product in question meets performance specifications

Revised W 9 Requirement

W-9 forms EIN numbers are no longer required

Deletion of erroneous statement in New Construction Lighting

The following statement from previous Business Manual has been deleted ldquoThe minimum lighting power density used to calculate the incentive shall be no lower than 50 of the ASHRAE 901-2007 valuerdquo

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 50

  • Commercial amp Industrial Program Application Manual
    • Follow This Easy Process
      • Pre-Approval Application Checklist
      • Final Application Checklist
          • Terms and Conditions
            • Program Effective Dates
            • Program and Project Eligibility
            • Incentive Payment Limits
            • Application Review Process
            • Inspections andor PUCrsquos Statewide Program Evaluation
            • Requirements for Custom Project Electricity Savings Calculation
            • Tax Liability
            • No Endorsement
            • Warranties
            • Limitation of Liability
            • Assignment
            • Customerrsquos Certification
            • Termination
            • Acknowledgement
              • Retrofit Lighting Solutions
                • General Linear Fluorescent Lamp and Ballast Specification Requirements
                • LED Lamps and Fixtures
                • Minimum Watts Reduced
                • Linear LED (Tubes)
                • Permanent Fixture Removal
                  • LED Traffic Signals
                    • LED Traffic Signals Incentive Table
                      • New Construction Lighting Specifications
                        • New Construction Lighting Incentives Table
                          • New Construction Lighting Power Density Code
                              • Exterior New Construction Lighting
                              • HVAC Equipment
                                • Air-Source Air Conditioners and Air-Source Heat Pumps
                                • Package Terminal Systems (Replacements)
                                • Ductless Mini-Split Heat Pump lt54 Tons
                                • Geothermal Heat Pump
                                  • Other HVAC Equipment
                                    • Hotel Guest Room Occupancy Sensor
                                    • ECM Circulation Fan
                                    • ECM Circulation Pump
                                    • Retrocomissioning Cooling Systems
                                    • Retrocomissioning Whole Building
                                    • Energy Management System
                                    • Demand Controlled Ventilation
                                    • Other HVAC Incentives Table
                                      • Unitary HVAC Chillers
                                        • Air-Cooled Chillers Water Cooled Positive Displacement Reciprocating Chillers and Water Cooled Centrifugal Chillers
                                          • Refrigeration
                                            • Anti-Sweat Heater Controls
                                            • Evaporator Fan Controls
                                            • Floating Head Pressure Controls
                                            • Automatic Door Closers for Walk-In Coolers and Freezers
                                            • EC Motor for Walk-inReach-in Refrigerated cases or Freezer cases
                                            • ENERGY STAR Solid Door Freezer and Glass Door Freezer and Refrigerators
                                            • Refrigeration Suction Pipe Insulation
                                            • Night Cover
                                            • Strip Curtain on Walk-In CoolerFreezer
                                            • Evaporator Coil Defrost Control
                                            • Variable Speed Refrigeration Compressor
                                            • Add Doors to Open Refrigerated Cases
                                            • Door Gaskets
                                            • Zero Energy Doors
                                            • Air Cooled Refrigeration Condenser
                                            • Oversized Condenser with VFD
                                            • Case Light Occupancy Controls
                                            • LED Open Case Lighting
                                            • LED Enclosed Case Lighting Refrigerated
                                            • LED Enclosed Case Lighting Freezer
                                              • Food Service
                                                • Beverage and Snack Machine Controls
                                                • ENERGY STARreg Refrigerated Beverage Vending Machines
                                                • ENERGY STARreg Electric Steam Cooker
                                                • ENERGY STARreg Electric Combination Oven
                                                • ENERGY STARreg Commercial Convection Oven
                                                • ENERGY STARreg Commercial Fryers
                                                • ENERGY STARreg Commercial Hot Holding Cabinet
                                                  • Motors and Variable Frequency Drives
                                                    • Early Replacement Motors
                                                    • Variable Frequency Drives on HVAC Fan Applications
                                                    • Variable Frequency Drives on Pump Applications
                                                    • Variable Speed Control for Kitchen Exhaust Hoods
                                                    • Variable Speed Drives for Process or Other Equipment
                                                      • Domestic Hot Water
                                                        • Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater
                                                        • Heat Pump Water Heater
                                                        • Low Flow Pre-Rinse Spray Valve
                                                        • Domestic Hot Water Incentive Table
                                                          • Compressed Air Systems
                                                            • No-loss Condensate Drain
                                                            • Air-Entraining air nozzle
                                                            • Storage Tanks for LoadNo Load Screw Compressors
                                                            • Cycling Refrigerated Thermal Mass Dryer
                                                            • Variable Speed Air Compressor
                                                            • Compressed Air System Optimization
                                                            • Compressed Air Systems Incentive Table
                                                              • Data Centers
                                                                • Air Cooled Chiller
                                                                • Air Cooled Chiller without Condenser
                                                                • Computer Room Air Conditioner
                                                                • Computer Room Air Handler Variable Speed
                                                                  • Replacing constant speed CRAH with VSD CRAH
                                                                    • Water Cooled Centrifugal Chiller
                                                                    • Water Cooled Positive Displacement or Reciprocating Chiller
                                                                    • Uninterruptible Power Supply
                                                                    • Mainframe Refresh
                                                                    • Server Refresh
                                                                      • Whole Building Systems
                                                                        • Whole Building Systems Approach
                                                                        • How to Apply for Whole Building Systems Incentives
                                                                        • Customer Eligibility
                                                                        • Project Eligibility
                                                                        • Whole Building Systems Incentives Table
                                                                          • Custom Project Specifications
                                                                            • Instructions for Energy Savings Calculations for Custom Projects
                                                                            • Equipment Information Submittals
                                                                            • Energy Savings Calculations
                                                                            • Baseline for Custom Analysis
                                                                            • Baseline or Existing System Summary

Fluorescent Lighting FL1 Interior T5 New Fluorescent Fixture w Electronic Ballast 11 $5 fixture Any T5 is eligible

FL2 T5HO High-Bay Fixture 54 $25 fixture Fixture efficiency must be gt 90

High bay fixtures must be installed at least 15ft above finished floor

FL3 HPT8 High-Bay Fixture 82 $20 fixture Must use High Ballast Factor (gt96) Fixture efficiency must be gt= 85

High bay fixtures must be installed at least 15ft above finished floor

FL4 HPT8 Fixture 20 $5 fixture Must use Low Ballast Factor (lt80)

FL5 RW T8 Lamp - Lamp only 10 $3 lamp Existing T8 fixture re-ballasting to a higher ballast factor are not eligible

HID Measures HID1 Ceramic HID - 25 -39 Watt 95 $13 fixture

Replacing higher wattage HID or High Pressure Sodium or Mercury Vapor

Interior replacements only

HID2 Ceramic HID - 70 Watt 155 $13 fixture HID3 Ceramic HID - 100 Watt 170 $15 fixture HID4 Pulse Start HID - 150 nominal Watts 72 $10 fixture HID5 Pulse Start HID - 350 nominal Watts 100 $13 fixture

HID6 Pulse Start HID - 1000 nominal Watts 400 $15 fixture

Interior LED Fixtures

LED1 ENERGY STAR Integral LED fixture Indoor Recessed Downlight Retrofit Module 38 $7 fixture Retrofit module of existing recessed fixture

LED2 ENERGY STAR Integral LED fixture Indoor Recessed Downlight 38 $7 fixture

New indoor recessed downlight fixture LED3 ENERGY STAR Integral LED fixture Indoor Portable LampTorchiere 30 $7 fixture

LED4 LED AccentTrack Lighting Fixtures 32 $6 head

LED5 LED Low-Bay Fixtures 150 $20 fixture For replacement of HID fixtures mounted le 15 above finished floor

LED6 LED Low-Bay Retrofit Kits 150 $20 fixture

LED8 LED Troffer Fixtures and Retrofit Kits 5 $10 fixture Troffers typically installed in lay-in ceilings 2x2 2x4 configuration

LED9 LED Surface and Suspended Linear Fixtures 25 $10 fixture Examples of LED surface-mounted luminaires include wrap vapor tight and strip fixtures (non-cooler)

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 14

-

Interior LED High Bay Fixtures

LED10A LED High-Bay Fixtures le 20000 LED lumens 150 $50 fixture

High bay fixtures must be installed at least 15ft above finished floor

LED10B LED High-Bay Fixtures gt 20000 LED lumens 225 $75 fixture

LED11A LED High-Bay Retrofit Kits le 20000 LED lumens 150 $50 fixture

LED11B LED High-Bay Retrofit Kits gt20000 LED lumens 225 $75 fixture

LED Parking Garage and Canopy Fixtures

LED12 LED Parking Garage and Canopy Fixtures and Retrofit Kits Outdoor lt= 5000 LED lumens 50 $15 fixture

Fixtures must be physically installed in a parking garage (area where vehicles are physically parked) or

fuel pump canopy Typically represents replacement of le175 W Metal

Halide or equivalent

LED13 LED Parking Garage and Canopy Fixtures and Retrofit Kits Outdoor 5001 - 10000 LED lumens 70 $30 fixture

Typically represents replacement of Metal Halide or equivalent greater than 175W and less than 400W

Product must be installed in a parking garage (area where vehicles are physically parked) or fuel pump

canopy

LED14 LED Parking Garage and Canopy Fixtures and Retrofit Kits Outdoor gt 10000 LED lumens 150 $50 fixture

Typically represents replacement of ge400 W Metal Halide or equivalent

Product must be physically installed in a parking garage (area where vehicles are physically parked) or

fuel pump canopy LED Screw in Lamps

ESLED1 ENERGY STAR Screw-in LED Bulb (Decorative Globe) 14 $5 lamp Lamp with globe shape such as type G

ESLED2 ENERGY STAR Screw-in LED Bulb (Decorative non-globe 14 $5 lamp Lamps with non-globe or candle-like shape such as type B C CA F

ESLED3 ENERGY STAR Screw-in LED Bulb and Low Voltage Mini-Reflector Bulbs (DirectionalReflector) 14 $5 lamp ANSI standard PAR and MR type lamps

ESLED4 ENERGY STAR Screw-in LED Bulb (Standard) 14 $5 lamp Lamp such as A series

ESLED5 ENERGY STAR Screw-in LED Bulb (Standard 3-Way) 14 $5 lamp Lamp such as A series with three light levels

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 15

- -LED Screw in Lamps Smart Bulbs

ESLED6 ENERGY STAR Screw-in LED Bulb (Decorative Globe Smart Bulb) 14 $5 lamp Lamp with globe shape such as type G

ESLED7 ENERGY STAR Screw-in LED Bulb (Decorative non-globe Smart Bulb) 14 $5 lamp Lamps with non-globe or candle-like shape such as

type B C CA F

ESLED8 ENERGY STAR Screw-in LED Bulb (DirectionalReflector Smart Bulb) 14 $5 lamp ANSI standard PAR lamps

ESLED9 ENERGY STAR Screw-in LED Bulb (Standard Smart Bulb) 14 $5 lamp Lamp such as A series

LED Tubes (replacing fluorescent)

TLED1 LED Replacement Lamps (Tubes) 2 5 $250 lamp Refer to Lighting Technical Specifications for requirements DLC Type A B and C are eligible bullType B linear (Interior driver) LEDs have the following installation requirements

bullExisting fluorescent ballast must be removed and fixturersquos incoming power wires are connected directly to the lamp sockets Strict adherence to installation instructions is critical when rewiring existing fixtures bullThe LED linear lamps must be delivered as part of a UL 1598C Classified Luminaire Retrofit Kit with instructions explaining the LED linear lamps must be installed on a luminaire that is already UL Listed bullThe retrofitted luminaire must be clearly identified using the label included with the Retrofit Kit indicating that the luminaire has been modified and can no longer operate the originally intended fluorescent lamp(s)

TLED2 LED Replacement Lamps (Tubes) 4 10 $4 lamp

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 16

LED Exterior Lighting

ELED1 ENERGY STAR Integral LED fixture Outdoor Recessed Downlight Retrofit Module 24 $10 module

ENERGY STAR or DLC Qualified fixtures ELED2 ENERGY STAR Integral LED fixture Outdoor Recessed

Downlight 24 $10 fixture

ELED3 LED Outdoor Flood Light Fixtures lt= 5000 LED lumens 50 $10 fixture Typically represents replacement of le175 W Metal Halide or equivalent Fixtures must be DLC qualified

ELED4 LED Outdoor Flood Light Fixtures gt 5000 LED lumens 70 $15 fixture Typically represents replacement of Metal Halide or equivalent greater than 175W Fixtures must be DLC qualified

ELED5 LED PoleArm Mounted Parking and Roadway Fixtures and Retrofit Kits lt= 5000 LED lumens 50 $25 fixture Typically represents replacement of le175 W Metal

Halide or equivalent Product must be DLC qualified

ELED6 LED PoleArm Mounted Parking and Roadway Fixtures and Retrofit Kits Outdoor gt 10000 LED lumens 150 $75 fixture

Typically represents replacement of Metal Halide or equivalent greater than 400W Product must be DLC

listed

ELED7 LED PoleArm Mounted Parking and Roadway Fixtures and Retrofit Kits Outdoor 5001 - 10000 LED lumens 70 $50 fixture

Typically represents replacement of Metal Halide or equivalent greater than 175W and less than 400W

Product must be DLC listed

ELED8 LED Wall Mount Fixtures and Retrofit Kits Outdoor lt= 5000 LED lumens 50 $25 fixture Typically represents replacement of le175 W Metal

Halide or equivalent Product must be DLC qualified

ELED9 LED Wall Mount Fixtures and Retrofit Kits Outdoor gt 5000 LED lumens 70 $50 fixture

Typically represents replacement of Metal Halide or equivalent greater than 175W Product must be DLC

qualified Permanent Fixture Removal

PFRA Indoor Permanent Fixture Removal combined with lighting retrofit na $010 watt removed Incentive only valid when units = ldquofixturerdquo in this table

Incentive is only offered when net lumens are reduced PFRB Outdoor Permanent Fixture Removal combined with lighting retrofit na $010 watt removed

Other LED Lighting LEDEXIT LED Exit Sign

na

$2 sign Replacing Incandescent or Fluorescent

SIGN1A Indoor LED Channel Signage $8 letter

Replacing Neon SIGN1B Outdoor LED Channel Signage $8 letter

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 17

Lighting Controls

CTL Unitary Sensor Controls

na

$1500 sensor

Passive infrared ultrasonic detectors are eligible Includes daylighting controls and all occupancy controls

Controls can be onoff stepped or continuous (dimming) Daylight sensor controls are required to be commissioned in order to ensure proper sensor calibration and energy savings

Minimum of 30 watts controlled per control

CLC Interior Central Lighting Controls $00175

square foot of area

under control

Automated central lighting control systems with override capabilities

This measure includes centrally-controlled time clocks wireless on off switches bi level switches computer based

controls pre-set scene selection dimmable ballasts and on-off dimmer switches for non-personal tuning

Floor plan must be submitted verifying square footage

DAYOCC Controls Combination - Daylighting and Occupancy Fixture Mounted $1500 sensor Minimum of 30 watts controlled per control

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 18

LED Traffic SignalsThis measure applies to the early replacement of existing incandescent traffic lights and pedestrian signals with LEDs New LED traffic signals must comply with ENERGY STAR requirements which can be found at httpswwwenergystargoviapartnersproduct_specseligibilitytraffic_eligpdf98bfshy1786

LED Traffic Signals Incentive Table

Round Traffic Signals 8 Red

Incentive per Signal

$15

8 Yellow 8 Green 12 Red

12 Yellow 12 Green

Turn Arrow Signals

8 Red

$13

8 Yellow 8 Green 12 Red

12 Yellow 12 Green

Pedestrian Signals

9 Pedestrian Only

$13

12 Hand Only 12 Pedestrian Only 12 Countdown Only

12 Pedestrian and Hand Overlay 16 Pedestrian and Hand Side by

Side 16 Pedestrian and Hand Overlay

16 Hand and Countdown Side-by-Side

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 19

Lighting Controls that Exceed Code Requirements

New Construction Lighting SpecificationsUnder the Lighting Power Density Approach the lighting power installed is compared with the lighting power allowed by code Incentives are available for systems where the installed lighting power is lower than the code-allowed power by at least 10 Savings are based on the Lighting Power Density (LPD) calculated on a watts per square foot basis Incentives will be paid only on the area of the building where the lighting installation is complete and is ready for occupancy If a portion of a building is not built-out such that the lighting in an area is not complete and ready for occupancy then that portion is not eligible for an incentive Baseline lighting power density is based on ASHRAE 901- 2007 Either the Space-by-Space or Building Area method may be used to calculate the LPD for the purposes of the incentive

Required Documentation bull Lighting Worksheet bull COMcheck Interior Lighting Report or equivalent analysis demonstrating space-byshy

space or building area calculations bull Reflected ceiling plans and electrical plan sheets showing lighting fixture layout bull Lighting fixture schedule sheet including fixture counts bull Fixture submittal or specification sheets showing model number and rated fixture wattage bull Architectural floor plans displaying floor area affected by proposed lighting installation

New Construction Lighting Incentives Table Lighting Wattssq ft

Improvement over of Code Incentive

gt= 10 and lt 20 $0035sq gt= 20 and lt 30 $007sq ft gt= 30 and lt 40 $0105sq

gt= 40 $021 sq ft

Incentives will be paid on a ($005kWh) custom basis Please contact Program Staff for eligibility of lighting controls for New Construction projects

Interior Occupancy Sensors Incentives are offered for occupancy-based controls in areas where they are not required by code Passive infrared ultrasonic detectors and fixture-integrated sensors or sensors with a combination sensor are eligible All sensors must be hard-wired and control interior lighting fixtures The incentive is per Watt controlled An inventory of the controlled fixtures and their wattage must be provided for each sensor with the Final Application

Daylight Dimming System Incentives are offered for daylight sensor controls in spaces with suitable available ambient light for at least part of the day Light may be through skylights clerestories windows or ldquolight tubesrdquo The controls can be onoff stepped or continuous dimming The onoff controller should turn off artificial lighting when the interior illuminance meets the desired indoor lighting level The stepped controller generally dims the artificial lighting 50 when the interior illuminance levels reach 50 of the desired lighting levels Continuous or dimming controllers dim artificial lighting proportionally to the available ambient light All types of daylight sensor controls are required to be commissioned in order to ensure proper sensor calibration and energy savings

Required Documentation bull Cut sheets or submittals of lighting control systems Reflected ceiling plans or schedule

showing which fixtures are controlled by lighting controls

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 20

New Construction Lighting Power Density CodeRequirements ndash Space by Space Method

Building Specific Space Types LPD (Wft2) Building Specific Space Types LPD (Wft2)

GymnasiumExercise Center AutomotivemdashServiceRepair 07

Playing Area 14 Manufacturing

Exercise Area 09 Low (lt25 ft Floor to Ceiling Height) 12

CourthousePolice StationPenitentiary High (gt25 ft Floor to Ceiling Height) 17

Courtroom 19 Detailed Manufacturing 21

Confinement Cells 09 Equipment Room 12

Judges Chambers 13 Control Room 05

Fire Stations HotelMotel Guest Rooms 11 Fire Station Engine Room 08 DormitorymdashLiving Quarters 11

Sleeping Quarters 03 Museum

Post Office-Sorting Area 12 General Exhibition 10 Convention Center-Exhibit Space 13 Restoration 17

Library BankOfficemdashBanking Activity Area 15 Card File and Cataloging 11 Religious Buildings

Stacks 17 Worship Pulpit Choir 24

Reading Area 12 Fellowship Hall 09

Hospital Retail

Emergency 27 Sales Area [For accent lighting see 93121(c)] 17

Recovery 08 Mall Concourse 17

Nurse Station 10 Sports Arena

ExamTreatment 15 Ring Sports Area 27

Pharmacy 12 Court Sports Area 23

Patient Room 07 Indoor Playing Field Area 14

Operating Room 22 Warehouse

Nursery 06 Fine Material Storage 14

Medical Supply 14 MediumBulky Material Storage 09

Physical Therapy 09 Parking GaragemdashGarage Area 02

Radiology 04 Transportation

LaundrymdashWashing 06 AirportmdashConcourse 06

AirTrainBusmdashBaggage Area 10

TerminalmdashTicket Counter 15

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 21

New Construction Lighting Power Density CodeRequirements ndash Building Area Method

Building Area Type 221 LPD (Wft2)

Automotive facility 09

Convention center 12

Courthouse 12

Dining bar loungeleisure 13

Dining cafeteriafast food 14

Dining family 16

Dormitory 1

Exercise center 1

Gymnasium 11

Health-care clinic 1

Hospital 12

Hotel 1

Library 13

Manufacturing facility 13

Motel 1

Motion picture theater 12

Building Area Type LPD (Wft2)

Multifamily 07

Museum 11

Office 1

Parking garage 03

Penitentiary 1

Performing arts theater 16

Policefire station 1

Post office 11

Religious building 13

Retail 15

Schooluniversity 12

Sports arena 11

Town hall 11

Transportation 1

Warehouse 08

Workshop 14

221 In cases where both a common space type and a building specific type are listed the building specific space type shall apply

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 22

Exterior New Construction LightingExterior New Construction savings over code lighting power density will be incentivized using custom lighting measure at $005kWh rate Participants must submit exterior lighting plans Submittals COMCHECK REPORT and lighting schedule for exterior lighting Savings are calculated from the LPD (Wsq ft) indicated below Additional information may be required based on the building exterior type and space description indicated below To contribute to incentive LEDs must satisfy program requirements for DLC Energy Star or equivalent listing

Required Documentation bull COMcheck Interior Lighting Report or equivalent analysis demonstrating space-by-space or

building area calculations bull Drawings showing lighting fixture layout bull Lighting fixture schedule sheet including fixture counts bull Fixture submittal or specification sheets showing model number and rated fixture wattage

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 23

Building Exterior Space Description LPD

Unco erect Pariki Ilg Area Parlurng ots arnd Drives 0 15 WfW

B i ing Grournds W al 1Yays lless Hlan 11] e 10 Wltirneru- 00

W a Nays 10 middot de or greater 112 W

Plaza a reas

Spec rest re areas

Stainh1ays 1ow 2

B i ing 8ntrames and Exits Ma efilbies m wr near foot of door width

Other doors 2o w 1r ear foot of door width

Ctmqpies and Overhimgs Free starndillg and a ched tmd 12s w m2 m bullerhangs

0 door sales Op en areas (ind udi Ilg ve id e sales 05 W lo )

street frontage far vehicle sales lots 21] W linear toot in addi middot on to open are-0bullmiddot lo~nce

B i ing facades 0 2 W tfl2 middot or eacil illumirnated N311 or surface

o r 5 0 Wllinear root fo r eac h m n inated N3l1 o r

surface length

Automated te lle r rnachmiddot es a lld 210 W per loca tion plus 91] night deposito liies W 1pernddiliorml A I middot per

1oca middot om

Eirltrances and gatehouse inspecliion 125 W ffl2 o middot uncovered slatiaBS a goo~ ed acir ies area

Load ing are-0s or law enforcement 0 5 W 2 of u rnco1bullered area fire ambu rnce and otiher emergency service ibullehmiddotctes

Drive-through w indOWs a taslrood 400 W per drive-Hlrough restaurants

Parking near 24 -h our retail 80111 W per main entry entmn ces

HVAC Equipment Air-Source Air Conditioners and Air-Source Heat Pumps New unitary air conditioning units or air source heat pumps that meet or exceed the qualifying cooling efficiency shown in the HVAC Incentives Worksheet are eligible for an incentive They can be either split systems or single package units The efficiency of split systems is based on an ARI reference number All packaged and split system cooling equipment must meet Air Conditioning and Refrigeration Institute (ARI) standards (210240 320 or 340360) be UL listed use a minimum ozone-depleting refrigerant (eg HCFC or HFC) All required efficiencies are based on the Consortium for Energy Efficiency (CEE) high-efficiency commercial air conditioning and heat pump specifications (wwwcee1org) A manufacturerrsquos specification sheet indicating the system efficiency must accompany the application Disposal of the existing unit

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 24

must comply with local codes and ordinances

Package Terminal Systems (Replacements) Package terminal air conditioners and packaged terminal heat pumps are through-the-wall self-contained units that are 2 tons (24000 Btuh) or less All EER values must be rated at 95degF outdoor dry-bulb temperature

Ductless Mini-Split Heat Pump lt54 Tons Incentives are offered for Ductless Mini-Split Heat Pump lt54 Tons with SEER rating greater than or equal to 120 and EER greater than or equal to 145 and HSPF greater than or equal to 90

Geothermal Heat Pump Geothermal equipment is a high-efficiency groundwater source water source or ground source heat pump system that meets or exceeds the energy efficiency requirements shown in the tables below These measures do not apply to heat pump systems coupled with non-heat pump systems such as chillers rooftop AC units boilers or cooling towers which must be filed as custom measures All HVAC applications other than comfort cooling and heating such as process cooling must also be applied for as custom measures

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 25

HVAC Heating Qualifying Incentive

Equipment Type and Cooling Capacity Cooling Qualifying Efficiency ($ per cooling Measure Code Efficiency

ton)

Air Cooled Air Conditioner

H01 lt 54 tons (lt 65000 Btuhr) 15 SEER NA $22

H02 lt 54 and lt 11 25 tons

125 IEER $22 (lt 65 000 Btuh and lt 135 000 Btuhr) NA

H03 lt11 25 and lt 20 tons

123 IEER NA $22 (lt 135000 Btuh and lt 240000 Btuhr)

H04 lt 20 and lt 6333 tons (~

11 1 IEER NA $22 240000 Btuh and lt 760000 Btuhr)

HOS ~ 6333 Ions (~ 760000 Btuhr) 103 IEER NA $22

Air Cooled Heat Pumps

H06 lt 54 tons (lt 65000 Btuhr) 143 SEER 87 HSPF $30

H07 lt 54 and lt 11 25 tons

123 IEER 3 3 COP $30 (lt 65000 Btuh and lt 135000 Btuhr)

HOS lt11 25 and lt 20 tons

1U IEER 3 2 COP $30 (lt 135000 Btuh and lt 240000 Btuhr)

H09 lt 2000 tons (240000 Btuhr) 105 IEER 3 2 COP $30

Packaged Terminal Systems (PTAC and PTHP) (PTHP only)

H10 lt 8000 Btuhr (lt066 tons) 11 8 EER 33 $17

H11 ~8000 and lt10500 Btuhr (~066 and lt 0875 tons) 11 4 EER 32 $17

H12 gt10500 Btuhr ( 875 tons) 107 EER 31 $17

H22 lt 54 tons (lt 65000 Btuhr) 121 EER 12 3 IEER NA $22

lt 54 and lt 11 25 tons 121 EER 12 3 IEER $22 H23

(lt 65000 Btuh and lt 135000 Btuhr) NA

H24 lt11 25 and lt 20 tons

120 EER 12 2 IEER $22 (lt 135000 Btuh and lt 240000 Btuhr) NA

H25 lt20 and lt 633 tons

119 EER 12 2 IEER $22 (lt 240000 Btuh and lt 760000 Btuhr) NA

H26 ~ 633 tons( lt760000 Btuhr) 110 EER 11 1 IEER NA

$22

HVAC Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 26

Other HVAC EquipmentHotel Guest Room Occupancy Sensor Incentives are offered for occupancy-based controls that control electric air conditioning air source heat pumps and or electric heating units for individual hotel rooms Systems with nonshyelectric heat are not eligible Sensors must be controlled by automatic occupancy detectors or a key-card system and the default setting for controlled units differ by at least 5 degrees (or shut the unit fan and heating or cooling off completely) from the operating set point during unshyoccupied periods The control system may also be tied into other electric loads such as lighting and plug loads to shut them off when occupancy is not sensed The incentive is per room Replacement or upgrades of existing occupancy-based controls are not eligible as a prescriptive incentive

Economizer Integrated Dual Enthalpy Economizer ControlsThis measure is targeted to non-residential establishments whose HVAC equipment is not equipped with a functional economizer

Circulation Fan High-Volume Low-SpeedFans must be greater than 16 feet in diameter and have variable speed control

ECM Circulation Fan This measure is targeted to non-residential customers whose air handling equipment currently uses a SP or PSC fan motor rather than an ECM This measure applies only to circulating fan motors of 1 HP or less Above 1 HP motors are governed by NEMA standards and would see little to no efficiency benefit by adding an ECM The targeted fan can supply heating or cooling only or both heating and cooling

ECM Circulation Pump This measure is targeted for replacement of a shaded pole or permanent split capacitor pump or motor with an electronically commutated pump or motor le75 HP

Retrocomissioning Cooling Systems Confined to chiller plant andor isolated packaged units For reservation must contain proposal with defined scope at equipment level that demonstrates energy savings For final approval required final commissioning report including raw data (TAB reports) demonstrating actual scope

This prescriptive measure can be used for facilities with maximum cooling demand less than 1687 tons Larger systems require the use of custom HVAC measure

Retrocomissioning Whole Building Covers all relevant major mechanical systems such as chiller plant air side systems compressed air andor process systems For reservation must contain proposal with defined scope at equipment level that demonstrates energy savings For final approval required final commissioning report including raw data (TAB reports) demonstrating actual scope

This prescriptive measure can be used for facilities less than 404858 square feet Larger facilities require the use of custom HVAC measure

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 27

Energy Management System For installing a web-based building automation system in existing buildings that currently have no digital automated HVAC controls or have outdated pneumatic control systems with inoperable time control functions Existing HVAC control systems must not have time-of-day scheduling Upgrading obsolete EMS HVAC system with inoperable time clock functions will be reviewed on a case-by-case basis for incentive eligibility This incentive cannot be combined with incentives for programmable thermostats or setback-setup controls Must include the controls strategy and a scaled floor-plan with controlled areas highlighted HVAC BAS systems must be new and include bull Central time clock control bull Web-based interface with PC-based controls and graphic bull Building performance Tracking bull Open-protocol architecture controls system shall consist of either LonTalk (ANSICEA 7091) or BACNet (ASHRAE ANSI 135) protocol being used between all controlled and controlling devices and every node on the network bull Minimum setback period must exceed 2200 hours per year bull A minimum setback space temperature of at least 10degF when heating and 5degF when cooling bull Ability to adjust schedules and settings remotely over the internet bull Report generation describing energy and operating trends

This prescriptive measure can be used for facilities with maximum cooling demand less than 456 tons Larger systems require the use of custom HVAC measure

Demand Controlled Ventilation New ventilation controls must use carbon dioxide levels to measure occupancy and modify the percentage of outside air based on occupancy levels Only buildings with space heating and cooling requirements are eligible Conditioned spaces must be kept between 65ordmF and 75ordmF during occupied operating hours Carbon dioxide sensors must be installed in conjunction with fully functioning motor operated outside air dampers Dual temperature air-side economizers with zone-level CO2 sensors for rooftop units are eligible

This prescriptive measure can be used for facilities with maximum cooling demand less than 2210 tons Larger systems require the use of custom HVAC measure

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 28

Other HVAC Measures- consult project manual for eligibility specifications HVAC

Measure Incentive Unit Quantity Incentive

Measure Code er Unit

H1 8 Hotel Guest Room Occupancy Sensor Room $20

H1 9 Economizer Integrated Dual Enthalpy Economizer Controls Ton $1 5

H20 Circulation Fan High-Volume Low-Speed Unit $30

H21 ECM Circulation Fan Fan $1 5

H27 ECM Circulation Pump Pump $50

H28 Retrocommissioning Cooling Systems

Ton $750

H29 Retrocommissioning Whole Buidling

Square Foot $010

H29 Energy Management System Ton $2500

H30 Demand Controlled Ventilation Ton $2500

Other HVAC Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 29

Unitary HVAC Chillers

Air-Cooled Chillers Water Cooled Positive Displacement Reciprocating Chillers and Water Cooled Centrifugal Chillers Chiller applications including existing multiple chiller configurations (including redundant or lsquostand-byrsquo chillers) existing chillers serving multiple load groups and chillers in industrial applications are defined as non-standard applications and must follow a site-specific custom protocol $005kWh) rate

Incentives are offered for chillers with an IPLV value (expressed in kW per ton) that is less than or equal to the qualifying efficiency shown in the table below The chiller efficiency rating must be based on ARI Standard 550590-2003 for IPLV conditions The chillers must meet ARI standards 550590-2003 be UL listed and use a minimum ozone-depleting refrigerant (eg HCFC or HFC) The ARI net capacity value should be used to determine the chiller tons A manufacturerrsquos specification sheet with the rated kWton-IPLV or COP-IPLV must accompany the application along with the four point performance data that is the basis for the IPLV The application must include a certification that the chiller is appropriately sized for site design load conditions

Chillers must satisfy efficiency requirements for both full load and IPLV efficiencies for either Path A or Path B The table shows the minimum efficiency ratings to qualify for the prescriptive incentive which must be consistent with the expected operating conditions of the efficient chiller For example if the efficient chiller satisfies Path A and generally performs at part load the appropriate baseline chiller efficiency is the IPLV value under Path A If the efficient chiller satisfies Path B and generally performs at full load the appropriate baseline chiller efficiency is the full load value under Path B Generally chillers operating above 70 percent load for a majority (50 or more) of operating hours should use Path A and chillers below 70 load for the majority of operating hours should use Path B

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 30

C3 lt 75 tons

C4 75 tons and lt 150 tons

cs ~ 150 tons and lt 300 tons C6 ~ 300 tons

Water Cooled Centrifugal Chillers C7 lt 300 tons CB ~ 300 tons and lt 600 tons

C9 ~ 600 tons

Path A

Qualifying Full Load Efficiency

Qualifying IPLV Efficiency

Path B

Qualifying Full Load Efficiency

Qualifying IPLV Efficiency

0780 kWton 0567 kWton 0800 kWton 0540 kWton

0775 kWton 0554 kWton 0790 kWton 0527 kWton

0680 kWton 0522 kWton 0718 kWton 0486 kWton 0620 kWton 0486 kWton 0639 kWton 0441 kWton

0634 kWton 0536 kWton 0639 kWton 0405 kWton 0576 kWton 0494 kWton 0600 kWton 0360 kWton

0570 kWton 0494 kWton 0590 kWton 0360 kWton

I

Incentive ($ton)

$17

$17

Unitary Chiller Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 31

Refrigeration

Anti-Sweat Heater Controls Incentives are offered for devices that sense the relative humidity in the air outside of the display case and cycles or turns off the glass door (if applicable) and frame anti-sweat heaters when the ambient dew point is below a preset set point Technologies that can turn off anti-sweat heaters based on sensing condensation (on the inner glass pane) also qualify Incentive is based on the number of doors

Evaporator Fan Controls This measure is for the installation of controls in medium temperature walk-in coolers The controller reduces airflow of the evaporator fans when there is no refrigerant flow The measure must control a minimum of 120 HP where fans operate continuously at full speed The measure also must reduce fan motor power by at least 75 during the off cycle This measure is not applicable if any of the following conditions apply 1) Compressor runs all the time with high duty cycle 2) Evaporator fan does not run at full speed all the time 3) Evaporator fan motor runs on poly-phase power 4) Evaporator fan motor is not shaded-pole or permanent split capacitor (PSC) 5) Evaporator fan does not use off-cycle or time-off defrost

Floating Head Pressure Controls Controls must vary head pressure to adjust condensing temperatures in relation to outdoor air temperature Must replace existing constant pressure or manually controlled systems to achieve reduced head pressure in order to maintain a minimum saturated condensing temperature of 70 degF or a 20 degF variance below design heat pressure during mild weather conditions Compressor size must be at least 5 HP

Automatic Door Closers for Walk-In Coolers and Freezers The auto-closer should be applied to the main insulated opaque door(s) of a walk-in cooler or freezer The auto-closer must be able to firmly close that door when it is within one inch of full closure This must be a newly installed automatic door closer replacements on previously installed door closers are not eligible for an incentive

EC Motor for Walk-inReach-in Refrigerated cases or Freezer cases Incentives are offered for replacement of an existing standard-efficiency shaded-pole or permanent split capacitor evaporator fan motor in refrigerated display cases or fan coil in walk-ins The replacement unit must be an Electronically Commutated Motor (ECM) This measure cannot be used in conjunction with the Evaporator Fan Controller measure

ENERGY STAR Solid Door Freezer and Glass Door Freezer and Refrigerators Incentives are offered for replacement of existing self-contained refrigerators and freezers with units that are ENERGY STARreg listed Only units with built-in refrigeration systems are qualified Units with remote refrigeration systems or units do not qualify Customers must provide proof that the appliance meets the CEE or ENERGY STAR efficiency specifications using ASHRAE Standard 72-2005 (38degF plusmn 2degF) Incentive is per unit

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 32

Refrigeration Suction Pipe Insulation 1 Must insulate bare refrigeration suction lines of 1 58 inches in diameter or less on existing equipment only 2 Cooler lines require frac34 inch of flexible closed-cell nitrite rubber or an equivalent insulation 3 Freezer lines require 1-inch of flexible closed-cell nitrite rubber or an equivalent insulation 4 Insulation exposed to the outdoors must be protected from the weather (ie jacketed with a medium-gauge aluminum jacket)

Night Cover 1 Must install a cover on an existing open refrigerated display case to decrease its cooling load during off hours 2 The equipment manufacturer must not object to the use of night covers for the existing display case model 3 This rebate is based on the linear footage of the installed 4 The cover must be applied for a period of at least six hours

Strip Curtain on Walk-In CoolerFreezer 1 New strip curtains or plastic swinging doors must be installed on doorways of refrigerated spaces (conditioned to less than 50deg F) 2 Rebate is based on the linear footage of the doorway that the strip curtains are being installed in 3 Opening between the strip curtain and bottom of doorway must be no larger than 1 inch 4 Strips must have an overlay greater than 1 inch

Evaporator Coil Defrost Control 1The current system must include an operating electric defrost system with a functional electroshymechanical time clock 2 Evaporator coil temperature and pressure must be monitored by controller in order to determine optimal defrost cycles 3 New intelligent control systems to control the defrost systems will typically replace timed- defrost controls

Variable Speed Refrigeration Compressor This measure VSD control for refrigeration systems and its eligibility targets applies to retrofit construction in the commercial and industrial building sectors it is most applicable to grocery stores or food processing applications with refrigeration systems This protocol is for a VSD control system replacing a slide valve control system

Add Doors to Open Refrigerated Cases The eligible retrofit equipment is either no sweat doors or doors with anti-sweat heaters If a lighting retrofit is included with the new doors it must consume the same amount of energy or less energy than the old lighting Upgrades to lighting or other system components should be processed separately Horizontal cases are not eligible and should be processed as custom

Door Gaskets PECO Smart Ideas For Your Business CampI Program Application Manual

Q1 2017 pg 33

This measure is applicable to commercial refrigeration and applies to the replacement of worn-out gaskets with new better-fitting gaskets Applicable gaskets include those located on the doors of walk-in andor reach-in coolers and freezers This protocol applies to the main doors of both low temperature (ldquofreezerrdquo ndash below 32 degF) and medium temperature (ldquocoolerrdquo ndash above 32 degF) walk-ins

Zero Energy Doors For this measure a no-heatlow-heat clear glass door must be installed on an upright display case It is limited to door heights of 57 inches or more Doors must have either heat reflective treated glass be gas filled or both This measure applies to low temperature cases onlymdashthose with a case temperature below 0degF Doors must have 3 or more panes Total door rail glass and frame heater amperage ( 120 volt) cannot exceed 039413 amps per door for low temperature display cases Rebate is based on the door width (not including case frame)

Air Cooled Refrigeration Condenser Approach temperature lt8F for low temperature loads lt13F for medium temperature loads

Oversized Condenser with VFD New standalone condenser must no more than 150 larger than load

Case Light Occupancy Controls Acceptable for freezer or refrigerated cases as well as open cases or cases with doors

LED Open Case Lighting For replacing open case T8 or T12 fluorescent fixtures with DLC listed LEDs on refrigerators coolers and freezers

LED Enclosed Case Lighting Refrigerated LED case lighting with or without motion sensors on enclosed refrigerated vertical displays The baseline equipment is assumed to be cases with uncontrolled T8 or T12 linear fluorescent lamps

LED Enclosed Case Lighting Freezer LED case lighting with or without motion sensors on enclosed freezer vertical displays The baseline equipment is assumed to be cases with uncontrolled T8 or T12 linear fluorescent lamps

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 34

Refrigeration Measures Ref Measure

Measure Incentive Unit IncentiveUnit Code R01 Anti-Sweat Heater Controls Door $30

R02 Evaporator Fan Controls Controller $50

R03 Floating-head Pressure Controls HP $20

R04 Automatic Door Closers fo r Walk-in Coolers Door $75

R05 Automatic Door Closers fo r Walk-in Freezers Door $75

R06 Evaporator Fan EC Motor fo r Reach- in Cases Motor $35

RO Evaporator Fan EC Motor fo r Walk-in Cases Motor $50

R08 ENERGY STARreg Glass Door Freezer lt15 Cu Ft Unit $100

R09 ENERGY STARreg Glass Door Freezer 15- 49 Cu Ft Unit $125

R10 ENERGY STARreg Glass Door Freezer ~ 50 Cu Ft Unit $145

R11 ENERGY STARreg Solid Door Freezer Unit $75

R12 ENERGY STARreg Glass Door Refrigerator lt50 Cu Ft Unit $30

R13 ENERGY STARreg Glass Door Refrigerator gt= 50 Cu Ft Unit $50

K14 t NtKGY ~ I AKreg ~Olld Uoor Ketngerator $ OU Cu t-t Unit $~0

R15 Suction Pipe Insulation Walk-in Coolers Linear Foot $050

R16 Suction Pipe Insulation Walk in Freezers Linear Foot $075

R17 Night Cover Linear Foot $800

R18 Strip Curtains on Walk-in Cooler Linear Foot $250

R19 Evaporator Coil Defrost Control Controller $7500

R20 Variable Speed Refrigeration Compressor Compressor $85

R21 Add Doors to Open Refrigerated Cases Door $55

R22 Door Gaskets Door $250

R23 Zero Energy Doors Door $50

R24 A ir Cooled Refrigeration Condenser Ton $10

R25 Oversized Condenser with VFD Ton $10

R26 Case Light Occupancy Controls Door $8

R27 LED Open Cose Lighting Cose $10

R28 LED Enclosed Case Lighting Refrigerated Door $30

R30 LED Enclosed Case Lighting Freezer Door $30

Refrigeration Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 35

Food Service Beverage and Snack Machine Controls Incentives are offered for refrigerated vending machines that contain non-perishable bottled and canned beverages Controller for both types of systems must include a passive infrared occupancy sensor to turn off fluorescent lights and other energized machine systems when the surrounding area is unoccupied for 15 minutes or longer For the refrigerated machines the control logic may include periodic power up at 2-hour intervals or longer to maintain product temperature and provide compressor protection

ENERGY STARreg Refrigerated Beverage Vending Machines Incentives are offered for ENERGY STARreg beverage vending machines Qualifying machines can be found at httpswwwenergystargovproductsothervending_machines

ENERGY STARreg Electric Steam Cooker This measure applies to the installation of electric ENERGY STAR steam cookers as either a new item or replacement for an existing unit Gas steam cookers are not eligible The steam cookers must meet minimum ENERGY STAR efficiency requirements A qualifying steam cooker must meet a minimum cooking efficiency of 50 percent and meet idle energy rates specified by pan capacity

ENERGY STARreg Electric Combination Oven This measure applies to electric ovens capable of handling single 12 x 20 x 25 pan per rack

ENERGY STARreg Commercial Convection Oven The oven must meet or exceed heavy load potato cooking energy efficiency of greater than 70 utilizing ASTM Standard F149 Applies only to electric ovens

ENERGY STARreg Commercial Fryers The commercial fryer must have a tested heavy load (French fry for large vats) cooking energy efficiency of greater than 80 utilizing American Society for Testing and Materials (ASTM) Standard F1361 for commercial fryers and ASTM Standard F2144 for large vat fryers Multiple vat configurations are paid per qualifying vat ENERGY STAR maintains a list of qualifying products and specifications at httpwwwenergystargov

ENERGY STARreg Commercial Hot Holding Cabinet Energy STAR rating electric

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 36

Food Service amp Other Measures FoodOther

Measure Incentive Unit Incentive

Measure Code Unit

F01 Beverage Machine Controls Unit $25

F02 Snack Machine Controls Unit $20

F03 ENERGY STARreg Refrigerated Beverage Vending Machir Unit $125

F04 ENERGY STARreg Commerc ial Steam Cooker Unit $200

F05 ENERGY STARreg Electric Combination Oven Unit $200

F06 ENERGY STARreg Commercial Electric Convection Oven Unit $150

F07 ENERGY STARreg Commerc ial Fryers Unit $100

F08 ENERGY STARregCommerc ial Hot Holding Cabinet Unit $200

Food Service Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 37

Motors and Variable Frequency DrivesEarly Replacement Motors For constant speed and uniformly loaded motors this measure applies to the replacement of old motors with new energy efficient motors of the same rated horsepower Old motors must be less than 15 years Replacements where the old motor and new motor have different horsepower ratings are considered custom measures Motors with variable speeds variable loading or industrial-specific applications are also considered custom measures

Motors Incentive Table Motors

Measure Code

HP Incentive per Motor

M01 15 - 10 $40 M02 11 - 50 $100 M03 51-100 $150 M04 gt100 $300

Only VFDs on unitary systems are eligible Non-unitary systems must be submitted as a custom measure Soft start motors are not eligible

Variable Frequency Drives on HVAC Fan Applications Incentives are offered for installing VFDs on existing HVAC fans that do not have pre-existing VFDs This measure applies to HVAC supply and return fans only All other fans including cooling tower fans must be submitted as custom measures Manually fixed speed settings on HVAC fans must be submitted via custom application The VFD must control motor speed automatically in response to pressure flow temperature or other variable signal The installation of a VSD must accompany the permanent removal or disabling of any throttling devices such as inlet vanes bypass dampers and throttling valves etc The incentive is offered per controlled HP

Variable Frequency Drives on Pump Applications Incentives are offered for installing VFDs on existing chilled water pumps and heating hot water pumps that do not have existing VFDs This measure applies to chilled water pumps and heating hot water pumps only All other pumps must be submitted as custom measures Manually fixed speed settings on pumps must be submitted via custom application The VFD must control motor speed automatically in response to pressure flow temperature or other variable signal The installation of a VSD must accompany the permanent removal or disabling of any throttling devices such as throttling valves The incentive is offered per controlled HP

Variable Speed Control for Kitchen Exhaust Hoods The measure consists of installing a new VSD in conjunction with a sensor control system that varies the exhaust rate of kitchen ventilation (exhaust andor makeup air fans) based on the heat and effluent output from the cooking appliances (ie the more heat and smokevapors generated the more ventilation needed) This involves installing a temperature sensor in the hood exhaust collar andor an optic sensor on the end of the hood that senses cooking conditions and allows the system to automatically vary the rate of exhaust to match requirements by adjusting the fan speed accordingly

Variable Speed Drives for Process or Other Equipment VFD must be used in conjunction with a process (non HVAC) application To qualify for this incentive the driven equipment must operate at least 2000 hours per year Redundant or back- up units do not qualify VFDs replacing existing VFDs do not qualify The VFD must control motor

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 38

speed automatically in response to pressure flow temperature or other variable signal VFDs installed as ldquosoft startrdquo without automatic manual closed loop speed control do not qualify The installation of a VFD must accompany the permanent removal or disabling of any throttling devices such as throttling valves The incentive is per controlled HP and only applies to controlled motors less than 50 HP

VSDVFD Incentives Table VFD

Measure Code

Measure Unit Incentive per Unit

Fan Application

V01 VFD on HVAC Fan HP $25 Pump Application

Variable Speed Control for Kitchen Exhaust Hoods

Variable Speed Drives for Process or Other Equipment

V02 VFD on Chilled Water Pumps HP $25 V03 VFD on Heating Hot Water Pumps HP $25

V04 Kitchen Exhaust Fan Retrofit Hood HP $500

V05 Process Motor lt 50 HP HP $50

Domestic Hot Water Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater This measure documents the energy savings attributed to converting from a standard electric water heater to an ENERGY STAR natural gaspropane-fired water heater or a standard oil-fired water heater with an Energy Factor of 0585

Heat Pump Water Heater This includes heat pump water heaters with energy factors meeting ENERGY STAR criteria The measure described here involves a direct retrofit of a resistive electric water heater with a heat pump water heater It does not cover systems where the heat pump is a pre-heater or is combined with other water heating sources More complicated installations can be treated as custom projects

Low Flow Pre-Rinse Spray Valve This measure applies to efficient low flow pre-rinse sprayers in grocery and food service applications The most likely areas of application are kitchens in restaurants and hotels Only premises with electric water heating may qualify for this incentive In addition the replacement pre-rinse spray nozzle must use less than 16 gallons per minute with a cleanability performance of 26 seconds per plate or less Low flow pre-rinse sprayers reduce hot water usage and save energy associated with water heating

Domestic Hot Water Incentive Table

Measure Code Measure Unit Retrofit Incentive per

Unit

W01 Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater Unit $100

W02 Heat Pump Water Heater Unit $100 W03 Low-Flow Pre-Rinse Spray Valve Valve $17

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 39

Compressed Air SystemsNo-loss Condensate Drain No-loss Condensate Drains are controlled by a sensor that monitors the level of condensate and only open when there is a need to drain condensate They close before compressed air is allowed to escape This measure is targeted to non-residential customers whose equipment is a timed drain that operates on a pre-set schedule Acceptable baseline conditions are compressed air systems with standard condensate drains operated by a solenoid and timer

Air-Entraining air nozzle This measure is targeted to non-residential customers whose compressed air equipment uses stationary air nozzles in a production application with an open copper tube of 18rdquo or 14rdquo orifice diameter Energy efficient conditions require replacement of an inefficient non-air entraining air nozzle with an energy efficient air-entraining air nozzle that use less than 15 CFM at 100 psi for industrial applications

Storage Tanks for LoadNo Load Screw Compressors This measure protocol applies to the installation of air receivers with pressureflow controls to loadno load compressors Loadno load compressors unload when there is low demand The process of unloading is done over a period of time to avoid foaming of the lubrication oil Using a storage tank with pressureflow control will buffer the air demands on the compressor Reducing the number of cycles in turn reduces the number of transition times from load to no load and saves energy The baseline equipment is a loadno load compressor with a 1 galcfm storage ratio or a modulating compressor with blowdown The high efficiency equipment is a loadno load compressor with a minimum storage ratio of 4 gallons of storage per cfm

Cycling Refrigerated Thermal Mass Dryer When air is compressed water vapor in the air condenses and collects in liquid form Some of this condensate collects in the air distribution system and can contaminate downstream components such as air tools with rust oil and pipe debris Refrigerated air dryers remove the water vapor by cooling the air to its dew point and separating the condensate Changes in production and seasonal variations in ambient air temperature lead to partial loading conditions on the dryer Standard air dryers use a hot gas bypass system that is inefficient at partial loads A Cycling Thermal Mass Dryer uses a thermal storage medium to store cooling capacity when the system is operated at partial loads allowing the dryer refrigerant compressor to cycle

This measure is targeted to non-residential customers whose equipment is a non-cycling refrigerated air dryer with a capacity of 600 cfm or below Acceptable baseline conditions are a non-cycling (eg continuous) air dryer with a capacity of 600 cfm or below The replacement of desiccant deliquescent heat-of-compression membrane or other types of dryers does not qualify under this measure

Variable Speed Air Compressor This type of compressor uses a special drive to control the speed (RPM) of the unit which in turn saves energy compared to a fixed speed equivalent

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 40

No-loss Condensate Drain Air-Entraining Air Nozzle Cycling Refrigerated Thermal Mass Dryer

Compressor Incentive per

Equipment Type Units Quantity Daily Operating Unit

Hours

CA04 Storage Tanks for LoadNo Load Screw

Compressor HP $10 Compressors

CA05 Variable Speed Air Compressor

Compressor HP $30

CA06 Compressed Air System Optimization

Compressor HP $50

Compressed Air System Optimization The submitted optimization measures must be identified in an Air System Audit or equivalent study to be eligible The measures must demonstrate energy savings as evaluated by a Program Engineer Additionally measures must also fall under one or more of the category below to be eligible

1) Install storage Receivers (new receivers only replacing existing storage receivers are ineligible)

2) Compressor control (must demonstrate improvement in partial load efficiency of the compress air system including reduceeliminate partially loaded units)

3) Dryer control 4) Source pressure reduction 5) Right-sizing distribution components such as piping filters regulators

connectors and hoses (routine maintenance replacements are ineligible) 6) Leakage detection and repair 7) Eliminate low-efficiency end-usages of compressed air 8) Heat recovery (most reduce electricity consumption of the replaced heat source)

Compressed Air Systems Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 41

lt65000 Btuh

~ 65000 Btuh and lt135000 Btuh

135000 Btuhand lt240000 Btuh

240000 Btuh and lt760000 Btuh

760000 Btuh

154

142

135

125

123

Chiller Capacity Path APath B efficiency (kWton )

lt 150 tons

~150 tons and lt300 tons

300 tons and lt400 tons

400 tons and lt600 tons

600 tons

lt75 tons

~75 tons and lt150 tons

~150 tons and lt300 tons

~300 tons and lt600 tons

600 tons

0610 FU0695 FL and 0550 IPLV0440 IPLV

0610 FU0635 FL and 0550 IPLV0400 IPLV

0560 FU0595 FL and 0520 IPLV0390 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

Path APath B efficiency (kWton )

0750 FU0780 FL and 0600 IPLV0500 IPLV

0720 FU0750 FL and 0560 IPLV0490 IPLV

0660 FU0680 FL and 0540 IPLV0440 IPLV

0610 FU0625 FL and 0520 IPLV0410 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

Data Centers Data Center incentives are available for facilities ranging in size from office server closets to large standalone facilities

Air Cooled Chiller Path APath B EER (BtuWh) lt150 tons 101 FL97 FL and 137 IPLV158 IPLV ge150 tons 101 FL97 FL and 140 IPLV161 IPLV

Air Cooled Chiller without Condenser Air-cooled chillers without condenser must be rated with matching condensers and comply with air-cooled chiller efficiency requirements

Computer Room Air Conditioner

Computer Room Air Handler Variable Speed Replacing constant speed CRAH with VSD CRAH

Water Cooled Centrifugal Chiller

Water Cooled Positive Displacement or Reciprocating Chiller

Uninterruptible Power Supply Must be Energy Star Certified UPS or have full load efficiency rating

ge948 for 20-100 kVA ge978for ge100 kVA

Mainframe Refresh The rated efficiency of the replacement Mainframes power supply must be at least 8 more

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 42

- Equipment Type Units IncentiveUnit

D1 Air Cooled Chiller Ton $4000 D2 Air Cooled Chiller W ithout Condenser Ton $2000 D3 Computer Room Air Conditioner Ton $3000 D4 Computer Room Air Handler Variable Speed Ton $1000 D5 Water Cooled Centrifugal Chiller Ton $3000 D6 Water Cooled Positive Displacement or Reciprocatin $3000 D7 Uninterruptible Power Supply 20-100 kVA $1000 D8 Uninterruptible Power Supply gt 100 kVA $1000 D9 Mainframe Refresh $2000

D10 Server Refresh $2000 D11 PC Power Managment System $600 D12 HVAC System Optimization $005 D1 3 HoUCold Aisle Containment kWh saved $005 D14 Server Virtualization kW reduction $40000 D1 5 Thin Clients Units $500

efficient compared to the existing Mainframes power supply The replacement Mainframe if Inactive must be decommissioned and removed from the Data Center

Server Refresh Replacement servers must be ENERGY STARreg certified Replacement servers power supply must be 5 more efficiency compared to the power supply of the replaced servers The replaced server must be decommissioned and removed from the data center

HVAC System Optimization Final system must have these features

-Implementation of free cooling by the addition of an economizer system -Conversion of constant speed CRACCRAH into variable speed operations using VFDs and additional control functionalities and -Elevation of exhaust air temperature

HotCold Aisle Containment Includes both Hot and Cold Aisles Installing new containment measures not replacing already existed aisle containment Plenum-only installations not eligible Must result in higher difference between the return air (hot aisle) and supply air (cold aisle) temperatures measured at rack intake and exhaust locations

Server Virtualization Minimum of consolidating 5 Servers virtualized into one Server The virtualized servers if inactive are removed from the Data Center

Thin Clients Must be ENERGY STAR certified thin clients Decommissioned clients are removed from the Data Center

Data Center Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 43

Whole Building Systems Whole Building Systems Approach

The Whole Building Systems approach is intended to encourage integrated energy efficient designs by providing enhanced incentives to the customer who addresses overall energy performance Owners of eligible and qualifying new construction and major renovation projects can receive Whole Building Systems incentives when energy modeling indicates the projectrsquos performance is over 10 better than the ASHRAE 901-2007 Savings from eligible electric end-uses in kilowatt hours define the amount of financial incentive Energy savings achieved through renewable energy sources are not counted toward project energy savings and are not included in the savings basis Incentive reservations obtained during the design phase of a project will be honored for up to 24 months

How to Apply for Whole Building Systems Incentives Before construction begins bull A Pre-notification Application must be submitted documenting the Owners intention to

seek Whole Building Systems incentives bull The Owner must confirm the goals and energy efficiency strategies being pursued by the

design team on the completed Pre-notification Worksheet (Checklist tab) and in the project Summary (Whole Building Performance Summary tab)

bull Submit executable building modeling software files bull Submit the Whole Building Performance Summary worksheet energy simulation model

inputs and outputs and supporting documentation bull Receive confirmation and eligibility notification from the PECO Smart Ideas team and

receive an incentive reservation bull The final incentive paid may differ from the reserved incentive amount The final

incentive will be calculated based on site-verified equipment installation and performance The Owners final application and complete documentation must be received within 6 months of equipment installation or certificate of occupancy whichever is later

bull An executable energy model and model output demonstrating compliance with the criteria of ASHRAE 901-2007 Appendix G will be required and the equipment data sheets LED lighting fixtures must be on the DLC or Energy STAR qualified products list (QPL) to be eligible LED fixtures not on the DLC or Energy STAR QPL has the option of submitting LM79 and LM80 test reports for evaluation against DLC and Energy STAR eligibility criteria

During the construction period bull Owner and design team continue to work closely with their chosen contractor to assure

energy efficiency measures are included and installed in the completed building

When the building is constructed and operational bull Complete the Owner final application Request an equipment verification site visit by the

PECO Smart Ideas team Equipment must be installed and fully operational o Program staff will schedule a site visit and utilize submitted documentation and

measurement tools to verify that the installation follows the submitted energy simulation model

bull When PECO confirms that there are no significant changes to the installed equipment payment of the reserved incentive will be made to the Owner within 6 weeks

bull If changes from the proposed design energy simulation are found the Owner and design team will be notified of the reduced incentive amount a period of 20 calendar days will

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 44

Improvement Incentive per Sq Ft

over Code

~11 to lt20 $0155

~20 to lt30 $0233

~30 to lt40 $0350

~40 to lt60 $0525

~60 $0700

be allowed for supplemental information to be provided if no additional information is received by PECO Smart Ideas team the reduced incentive payments will be made and sent to the Owner if additional clarification and information is available program staff will work diligently to resolve the discrepancies and arrive at a reasonable incentive adjustment with the customer

Payments made by PECO Smart Ideas are final

Customer Eligibility The Owner of the proposed new building project must be a customer of PECO and receive delivery of electric service from PECO to receive kilowatt-hour based incentives Please note that electricity supply can be provided by any vendor

Project Eligibility bull The project must be a new construction or major renovation Major renovations involving

the removal and redesign of at least two building systems (such as interior lighting and mechanical systems) may apply for Whole Building Systems incentives

bull To qualify for incentives projects must demonstrate energy efficiency enhancements that achieve at least 11 improvement in the proposed design versus the standard baseline

bull The Owner must submit a Pre-approval Application to the program at the stage where changes for increased energy efficiency are still feasible and construction has not been completed

bull Projects receiving Whole Building Systems incentives are not eligible to receive other incentives such as the prescriptive or custom program incentives for the same scope

bull Project components that are NOT eligible for consideration as a basis for PECO Smart Ideas include the following o Alternative fuel sources (eg use of gas or oil equipment in lieu of electric) Please note

that combined heat and power (CHP) systems will be incentivized for the electricity they produce

o Renewable energy sources (eg solar wind biomass) bull Ineligible savings include exterior lighting process receptacle miscellaneous loads and

other unregulated end-uses Custom incentives are available for new construction exterior lighting

Whole Building Systems Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 45

Custom Project Specifications Instructions for Energy Savings Calculations for Custom Projects Custom projects must involve measures that result in a reduction in electric energy use (kWh) Electricity savings may result from either efficiency improvements or fuel switching Custom Incentives are based on the first year kilowatt-hour savings Custom applications must be accompanied by detailed engineering calculations that document the annual total energy savings

The following serve as guidelines for the minimum required documentation

Equipment Information Submittals bull A list of the present and proposed equipment and components to be installed

including manufacturerrsquos catalogmodel number bull Manufacturerrsquos specification sheets showing capacities and performance for all major

components

Energy Savings Calculations Provide calculations documenting the predicted energy consumption of the existing (or baseline) and proposed system using appropriate analytical tools and clearly stated assumptions Calculations may be performed by ldquohandrdquo but spreadsheet analysis or more rigorous modeling is preferred All analysis should be provided in electronic format All assumptions such as operating hours existing and proposed equipment operational details must be presented Engineering algorithms and procedures from recognized technical organizations such as ASHRAE SMACNA ANSI etc must be used Use rated performance factors tested under accepted procedures specified by recognized rating agencies such as AHRI ANSI ASTM etc Provide an explanation when equipment performance rating conditions vary from standard conditions

In support of the calculations extensive documentation must be provided that provides the basis for the savings estimates The documentation must provide information on the equipment operating schedule daily and seasonal load profile and baseline AND energy efficient equipment performance at the operating loads Typical documentation for custom projects often includes bull Engineering or architectural drawings and ldquoequipment schedulerdquo sheets bull Component specification sheets that include part load efficiency or performance

factors bull Spreadsheet calculations or inputoutput files and results from system modeling or

other engineering analysis using accepted engineering algorithms and practices bull Log sheets trend logs from a building management system or other operating

documentation that are often necessary to document operating hours and equipment loading and used as a basis for the calculations (in some cases short term monitoring may be required to document the load profile)

bull Control sequence of operations that are necessary where controls play a part in the savings equation

Additional documentation other than that described in the application may be required for program participation Larger projects may also require pre- and post-project sub metering or monitoring of loads andor power input as part of another measurement and verification activity to demonstrate the actual energy savings that are realized

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 46

Baseline for Custom Analysis Where equipment is replaced prior to the end of its rated service life in order to achieve energy savings the existing equipment performance may be used as the baseline in the energy savings calculations Where equipment is replaced due to failure or for other reasons (such as obsolescence or a need for more capacity) the baseline performance used in the savings calculation should be either the minimum performance that would be required by code for that equipment type and application (where a code applies) or the performance of the equipment that would have been selected as the customers standard practice when a code does not apply

Baseline or Existing System Summary On custom worksheet on application form include make model number name plate information (such as operating voltage and rated full load amps) rated capacity quantities equipment condition and age facility operating hours equipment operating schedule and load curves If needed attach separate sheets

All decisions regarding incentives for custom projects are in the sole discretion of PECO

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 47

APPENDIX PROGRAM UPDATES SUMMARY (Q1 2017) Multifamily Nursing Home and Assisted Living retrofit customers need to apply for incentives through the PECO Smart Ideas Multi-Family Program administered by Franklin Energy For more information please contact Taylor Adler at tadlerfranklinenergycom or call 1-844-4BIZ-SAVE Multifamily Nursing Home and Assisted Living new construction customers can proceed with applying for incentives here

Revised Incentives

Data Centers

Measure Incentive Effective Immediately Previous Incentive

Air-cooled chiller for data centers $40ton $10ton Air-cooled chiller without condenser for data centers $20ton $10ton

Computer room air conditioner $30ton $7ton Water-cooled centrifugal chiller for data centers $30ton $5ton Water-cooled positive displacement or reciprocating chiller for data centers

$30ton $5ton

Uninterruptible power supply 20-100 kVA $10kVA $6kVA Uninterruptible power supply gt100 kVA $10kVA $1kVA Mainframe refresh $20kW installed $5kW installed Server refresh $20kW installed $4kW installed Server virtualization $400kW reduction $4kW reduction Thin clients $5units $4units

Lighting (Effective Immediately)

Measure Incentive Effective Immediately Specification Previous

Incentive Specification

New construction exterior LED outdoor flood light LED parking garage and canopy lighting LED polearm mounted parking and roadway lighting LED wall mount fixture

$005kWh (custom)

Lighting Power Density (LPD) Requirements Unchanged

$10-54 fixture

Lighting Power Density (LPD) (Wft2) by Space Type or Building Area

LED Replacement Lamps (Tubes) 2

$250lamp 5 Min Watts Reduced

$250lamp 6 Min Watts Reduced

LED Replacement Lamps (Tubes) 4

$400lamp 10 Min Watts Reduced

$400lamp 12 Min Watts Reduced

Permanent Fixture Removal $010Watt removed

Clarification of calculation to represent actual Wattage removed

$010Watt removed

Lighting (Effective 6117)

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 48

Measure Incentive Effective 6117 Specification Previous

Incentive Previous Specification

Interior LED high-bay fixtures andor retrofit kits if lt 20000 LED Lumens

$50fixture 150 Min Watts Reduced

$75fixture 150 Min Watts Reduced

Interior LED high-bay fixtures andor retrofit kits if gt 20000 LED Lumens

$75fixture 225 Min Watts Reduced

$75fixture 150 Min Watts Reduced

New Incentives

Compressed Air

Measure New Incentive Effective Immediately Variable speed air compressor $30compressor HP Compressed air system optimization $50compressor HP

HVAC

Measure New Incentive Effective Immediately ECM circulation pump $50pump Retro-commissioning cooling systems $750ton Retro-commissioning whole building $010square foot Energy management system $25ton Demand controlled ventilation $25ton Water-cooled air conditioner $22ton

Food Service

Measure New Incentive Effective Immediately Combination oven $200unit ENERGY STARreg commercial convection oven $150unit ENERGY STARreg commercial fryers $100unit ENERGY STARreg commercial hot holding cabinet $200unit

Refrigeration

Measure New Incentive Effective Immediately Air-cooled refrigeration condenser $10ton Oversized condenser with VFD $10ton Case light occupancy controls $750door

Lighting

Measure New Incentive Effective Immediately Interior central lighting controls $00175sq foot

Motors and Drives

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 49

-

Measure New Incentive Effective Immediately VFD for dust collection system motor $50HP

Application Clarifications and Revised Requirements

Clarification of LED Eligibility for New Construction or Retrofit Projects

LED Eligibility is determined by whether lighting products are listed in either the DesignLights Consortium (DLC) Qualified Products List of commercial-grade LED luminaires or the US Environmental Protection Agency database of ENERGY STAR certified products For products not yet listed contractors may submit LM79 and LM80 test reports PECO Smart Ideas engineers will review test reports to determine if the product in question meets performance specifications

Revised W 9 Requirement

W-9 forms EIN numbers are no longer required

Deletion of erroneous statement in New Construction Lighting

The following statement from previous Business Manual has been deleted ldquoThe minimum lighting power density used to calculate the incentive shall be no lower than 50 of the ASHRAE 901-2007 valuerdquo

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 50

  • Commercial amp Industrial Program Application Manual
    • Follow This Easy Process
      • Pre-Approval Application Checklist
      • Final Application Checklist
          • Terms and Conditions
            • Program Effective Dates
            • Program and Project Eligibility
            • Incentive Payment Limits
            • Application Review Process
            • Inspections andor PUCrsquos Statewide Program Evaluation
            • Requirements for Custom Project Electricity Savings Calculation
            • Tax Liability
            • No Endorsement
            • Warranties
            • Limitation of Liability
            • Assignment
            • Customerrsquos Certification
            • Termination
            • Acknowledgement
              • Retrofit Lighting Solutions
                • General Linear Fluorescent Lamp and Ballast Specification Requirements
                • LED Lamps and Fixtures
                • Minimum Watts Reduced
                • Linear LED (Tubes)
                • Permanent Fixture Removal
                  • LED Traffic Signals
                    • LED Traffic Signals Incentive Table
                      • New Construction Lighting Specifications
                        • New Construction Lighting Incentives Table
                          • New Construction Lighting Power Density Code
                              • Exterior New Construction Lighting
                              • HVAC Equipment
                                • Air-Source Air Conditioners and Air-Source Heat Pumps
                                • Package Terminal Systems (Replacements)
                                • Ductless Mini-Split Heat Pump lt54 Tons
                                • Geothermal Heat Pump
                                  • Other HVAC Equipment
                                    • Hotel Guest Room Occupancy Sensor
                                    • ECM Circulation Fan
                                    • ECM Circulation Pump
                                    • Retrocomissioning Cooling Systems
                                    • Retrocomissioning Whole Building
                                    • Energy Management System
                                    • Demand Controlled Ventilation
                                    • Other HVAC Incentives Table
                                      • Unitary HVAC Chillers
                                        • Air-Cooled Chillers Water Cooled Positive Displacement Reciprocating Chillers and Water Cooled Centrifugal Chillers
                                          • Refrigeration
                                            • Anti-Sweat Heater Controls
                                            • Evaporator Fan Controls
                                            • Floating Head Pressure Controls
                                            • Automatic Door Closers for Walk-In Coolers and Freezers
                                            • EC Motor for Walk-inReach-in Refrigerated cases or Freezer cases
                                            • ENERGY STAR Solid Door Freezer and Glass Door Freezer and Refrigerators
                                            • Refrigeration Suction Pipe Insulation
                                            • Night Cover
                                            • Strip Curtain on Walk-In CoolerFreezer
                                            • Evaporator Coil Defrost Control
                                            • Variable Speed Refrigeration Compressor
                                            • Add Doors to Open Refrigerated Cases
                                            • Door Gaskets
                                            • Zero Energy Doors
                                            • Air Cooled Refrigeration Condenser
                                            • Oversized Condenser with VFD
                                            • Case Light Occupancy Controls
                                            • LED Open Case Lighting
                                            • LED Enclosed Case Lighting Refrigerated
                                            • LED Enclosed Case Lighting Freezer
                                              • Food Service
                                                • Beverage and Snack Machine Controls
                                                • ENERGY STARreg Refrigerated Beverage Vending Machines
                                                • ENERGY STARreg Electric Steam Cooker
                                                • ENERGY STARreg Electric Combination Oven
                                                • ENERGY STARreg Commercial Convection Oven
                                                • ENERGY STARreg Commercial Fryers
                                                • ENERGY STARreg Commercial Hot Holding Cabinet
                                                  • Motors and Variable Frequency Drives
                                                    • Early Replacement Motors
                                                    • Variable Frequency Drives on HVAC Fan Applications
                                                    • Variable Frequency Drives on Pump Applications
                                                    • Variable Speed Control for Kitchen Exhaust Hoods
                                                    • Variable Speed Drives for Process or Other Equipment
                                                      • Domestic Hot Water
                                                        • Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater
                                                        • Heat Pump Water Heater
                                                        • Low Flow Pre-Rinse Spray Valve
                                                        • Domestic Hot Water Incentive Table
                                                          • Compressed Air Systems
                                                            • No-loss Condensate Drain
                                                            • Air-Entraining air nozzle
                                                            • Storage Tanks for LoadNo Load Screw Compressors
                                                            • Cycling Refrigerated Thermal Mass Dryer
                                                            • Variable Speed Air Compressor
                                                            • Compressed Air System Optimization
                                                            • Compressed Air Systems Incentive Table
                                                              • Data Centers
                                                                • Air Cooled Chiller
                                                                • Air Cooled Chiller without Condenser
                                                                • Computer Room Air Conditioner
                                                                • Computer Room Air Handler Variable Speed
                                                                  • Replacing constant speed CRAH with VSD CRAH
                                                                    • Water Cooled Centrifugal Chiller
                                                                    • Water Cooled Positive Displacement or Reciprocating Chiller
                                                                    • Uninterruptible Power Supply
                                                                    • Mainframe Refresh
                                                                    • Server Refresh
                                                                      • Whole Building Systems
                                                                        • Whole Building Systems Approach
                                                                        • How to Apply for Whole Building Systems Incentives
                                                                        • Customer Eligibility
                                                                        • Project Eligibility
                                                                        • Whole Building Systems Incentives Table
                                                                          • Custom Project Specifications
                                                                            • Instructions for Energy Savings Calculations for Custom Projects
                                                                            • Equipment Information Submittals
                                                                            • Energy Savings Calculations
                                                                            • Baseline for Custom Analysis
                                                                            • Baseline or Existing System Summary

-

Interior LED High Bay Fixtures

LED10A LED High-Bay Fixtures le 20000 LED lumens 150 $50 fixture

High bay fixtures must be installed at least 15ft above finished floor

LED10B LED High-Bay Fixtures gt 20000 LED lumens 225 $75 fixture

LED11A LED High-Bay Retrofit Kits le 20000 LED lumens 150 $50 fixture

LED11B LED High-Bay Retrofit Kits gt20000 LED lumens 225 $75 fixture

LED Parking Garage and Canopy Fixtures

LED12 LED Parking Garage and Canopy Fixtures and Retrofit Kits Outdoor lt= 5000 LED lumens 50 $15 fixture

Fixtures must be physically installed in a parking garage (area where vehicles are physically parked) or

fuel pump canopy Typically represents replacement of le175 W Metal

Halide or equivalent

LED13 LED Parking Garage and Canopy Fixtures and Retrofit Kits Outdoor 5001 - 10000 LED lumens 70 $30 fixture

Typically represents replacement of Metal Halide or equivalent greater than 175W and less than 400W

Product must be installed in a parking garage (area where vehicles are physically parked) or fuel pump

canopy

LED14 LED Parking Garage and Canopy Fixtures and Retrofit Kits Outdoor gt 10000 LED lumens 150 $50 fixture

Typically represents replacement of ge400 W Metal Halide or equivalent

Product must be physically installed in a parking garage (area where vehicles are physically parked) or

fuel pump canopy LED Screw in Lamps

ESLED1 ENERGY STAR Screw-in LED Bulb (Decorative Globe) 14 $5 lamp Lamp with globe shape such as type G

ESLED2 ENERGY STAR Screw-in LED Bulb (Decorative non-globe 14 $5 lamp Lamps with non-globe or candle-like shape such as type B C CA F

ESLED3 ENERGY STAR Screw-in LED Bulb and Low Voltage Mini-Reflector Bulbs (DirectionalReflector) 14 $5 lamp ANSI standard PAR and MR type lamps

ESLED4 ENERGY STAR Screw-in LED Bulb (Standard) 14 $5 lamp Lamp such as A series

ESLED5 ENERGY STAR Screw-in LED Bulb (Standard 3-Way) 14 $5 lamp Lamp such as A series with three light levels

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 15

- -LED Screw in Lamps Smart Bulbs

ESLED6 ENERGY STAR Screw-in LED Bulb (Decorative Globe Smart Bulb) 14 $5 lamp Lamp with globe shape such as type G

ESLED7 ENERGY STAR Screw-in LED Bulb (Decorative non-globe Smart Bulb) 14 $5 lamp Lamps with non-globe or candle-like shape such as

type B C CA F

ESLED8 ENERGY STAR Screw-in LED Bulb (DirectionalReflector Smart Bulb) 14 $5 lamp ANSI standard PAR lamps

ESLED9 ENERGY STAR Screw-in LED Bulb (Standard Smart Bulb) 14 $5 lamp Lamp such as A series

LED Tubes (replacing fluorescent)

TLED1 LED Replacement Lamps (Tubes) 2 5 $250 lamp Refer to Lighting Technical Specifications for requirements DLC Type A B and C are eligible bullType B linear (Interior driver) LEDs have the following installation requirements

bullExisting fluorescent ballast must be removed and fixturersquos incoming power wires are connected directly to the lamp sockets Strict adherence to installation instructions is critical when rewiring existing fixtures bullThe LED linear lamps must be delivered as part of a UL 1598C Classified Luminaire Retrofit Kit with instructions explaining the LED linear lamps must be installed on a luminaire that is already UL Listed bullThe retrofitted luminaire must be clearly identified using the label included with the Retrofit Kit indicating that the luminaire has been modified and can no longer operate the originally intended fluorescent lamp(s)

TLED2 LED Replacement Lamps (Tubes) 4 10 $4 lamp

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 16

LED Exterior Lighting

ELED1 ENERGY STAR Integral LED fixture Outdoor Recessed Downlight Retrofit Module 24 $10 module

ENERGY STAR or DLC Qualified fixtures ELED2 ENERGY STAR Integral LED fixture Outdoor Recessed

Downlight 24 $10 fixture

ELED3 LED Outdoor Flood Light Fixtures lt= 5000 LED lumens 50 $10 fixture Typically represents replacement of le175 W Metal Halide or equivalent Fixtures must be DLC qualified

ELED4 LED Outdoor Flood Light Fixtures gt 5000 LED lumens 70 $15 fixture Typically represents replacement of Metal Halide or equivalent greater than 175W Fixtures must be DLC qualified

ELED5 LED PoleArm Mounted Parking and Roadway Fixtures and Retrofit Kits lt= 5000 LED lumens 50 $25 fixture Typically represents replacement of le175 W Metal

Halide or equivalent Product must be DLC qualified

ELED6 LED PoleArm Mounted Parking and Roadway Fixtures and Retrofit Kits Outdoor gt 10000 LED lumens 150 $75 fixture

Typically represents replacement of Metal Halide or equivalent greater than 400W Product must be DLC

listed

ELED7 LED PoleArm Mounted Parking and Roadway Fixtures and Retrofit Kits Outdoor 5001 - 10000 LED lumens 70 $50 fixture

Typically represents replacement of Metal Halide or equivalent greater than 175W and less than 400W

Product must be DLC listed

ELED8 LED Wall Mount Fixtures and Retrofit Kits Outdoor lt= 5000 LED lumens 50 $25 fixture Typically represents replacement of le175 W Metal

Halide or equivalent Product must be DLC qualified

ELED9 LED Wall Mount Fixtures and Retrofit Kits Outdoor gt 5000 LED lumens 70 $50 fixture

Typically represents replacement of Metal Halide or equivalent greater than 175W Product must be DLC

qualified Permanent Fixture Removal

PFRA Indoor Permanent Fixture Removal combined with lighting retrofit na $010 watt removed Incentive only valid when units = ldquofixturerdquo in this table

Incentive is only offered when net lumens are reduced PFRB Outdoor Permanent Fixture Removal combined with lighting retrofit na $010 watt removed

Other LED Lighting LEDEXIT LED Exit Sign

na

$2 sign Replacing Incandescent or Fluorescent

SIGN1A Indoor LED Channel Signage $8 letter

Replacing Neon SIGN1B Outdoor LED Channel Signage $8 letter

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 17

Lighting Controls

CTL Unitary Sensor Controls

na

$1500 sensor

Passive infrared ultrasonic detectors are eligible Includes daylighting controls and all occupancy controls

Controls can be onoff stepped or continuous (dimming) Daylight sensor controls are required to be commissioned in order to ensure proper sensor calibration and energy savings

Minimum of 30 watts controlled per control

CLC Interior Central Lighting Controls $00175

square foot of area

under control

Automated central lighting control systems with override capabilities

This measure includes centrally-controlled time clocks wireless on off switches bi level switches computer based

controls pre-set scene selection dimmable ballasts and on-off dimmer switches for non-personal tuning

Floor plan must be submitted verifying square footage

DAYOCC Controls Combination - Daylighting and Occupancy Fixture Mounted $1500 sensor Minimum of 30 watts controlled per control

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 18

LED Traffic SignalsThis measure applies to the early replacement of existing incandescent traffic lights and pedestrian signals with LEDs New LED traffic signals must comply with ENERGY STAR requirements which can be found at httpswwwenergystargoviapartnersproduct_specseligibilitytraffic_eligpdf98bfshy1786

LED Traffic Signals Incentive Table

Round Traffic Signals 8 Red

Incentive per Signal

$15

8 Yellow 8 Green 12 Red

12 Yellow 12 Green

Turn Arrow Signals

8 Red

$13

8 Yellow 8 Green 12 Red

12 Yellow 12 Green

Pedestrian Signals

9 Pedestrian Only

$13

12 Hand Only 12 Pedestrian Only 12 Countdown Only

12 Pedestrian and Hand Overlay 16 Pedestrian and Hand Side by

Side 16 Pedestrian and Hand Overlay

16 Hand and Countdown Side-by-Side

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 19

Lighting Controls that Exceed Code Requirements

New Construction Lighting SpecificationsUnder the Lighting Power Density Approach the lighting power installed is compared with the lighting power allowed by code Incentives are available for systems where the installed lighting power is lower than the code-allowed power by at least 10 Savings are based on the Lighting Power Density (LPD) calculated on a watts per square foot basis Incentives will be paid only on the area of the building where the lighting installation is complete and is ready for occupancy If a portion of a building is not built-out such that the lighting in an area is not complete and ready for occupancy then that portion is not eligible for an incentive Baseline lighting power density is based on ASHRAE 901- 2007 Either the Space-by-Space or Building Area method may be used to calculate the LPD for the purposes of the incentive

Required Documentation bull Lighting Worksheet bull COMcheck Interior Lighting Report or equivalent analysis demonstrating space-byshy

space or building area calculations bull Reflected ceiling plans and electrical plan sheets showing lighting fixture layout bull Lighting fixture schedule sheet including fixture counts bull Fixture submittal or specification sheets showing model number and rated fixture wattage bull Architectural floor plans displaying floor area affected by proposed lighting installation

New Construction Lighting Incentives Table Lighting Wattssq ft

Improvement over of Code Incentive

gt= 10 and lt 20 $0035sq gt= 20 and lt 30 $007sq ft gt= 30 and lt 40 $0105sq

gt= 40 $021 sq ft

Incentives will be paid on a ($005kWh) custom basis Please contact Program Staff for eligibility of lighting controls for New Construction projects

Interior Occupancy Sensors Incentives are offered for occupancy-based controls in areas where they are not required by code Passive infrared ultrasonic detectors and fixture-integrated sensors or sensors with a combination sensor are eligible All sensors must be hard-wired and control interior lighting fixtures The incentive is per Watt controlled An inventory of the controlled fixtures and their wattage must be provided for each sensor with the Final Application

Daylight Dimming System Incentives are offered for daylight sensor controls in spaces with suitable available ambient light for at least part of the day Light may be through skylights clerestories windows or ldquolight tubesrdquo The controls can be onoff stepped or continuous dimming The onoff controller should turn off artificial lighting when the interior illuminance meets the desired indoor lighting level The stepped controller generally dims the artificial lighting 50 when the interior illuminance levels reach 50 of the desired lighting levels Continuous or dimming controllers dim artificial lighting proportionally to the available ambient light All types of daylight sensor controls are required to be commissioned in order to ensure proper sensor calibration and energy savings

Required Documentation bull Cut sheets or submittals of lighting control systems Reflected ceiling plans or schedule

showing which fixtures are controlled by lighting controls

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 20

New Construction Lighting Power Density CodeRequirements ndash Space by Space Method

Building Specific Space Types LPD (Wft2) Building Specific Space Types LPD (Wft2)

GymnasiumExercise Center AutomotivemdashServiceRepair 07

Playing Area 14 Manufacturing

Exercise Area 09 Low (lt25 ft Floor to Ceiling Height) 12

CourthousePolice StationPenitentiary High (gt25 ft Floor to Ceiling Height) 17

Courtroom 19 Detailed Manufacturing 21

Confinement Cells 09 Equipment Room 12

Judges Chambers 13 Control Room 05

Fire Stations HotelMotel Guest Rooms 11 Fire Station Engine Room 08 DormitorymdashLiving Quarters 11

Sleeping Quarters 03 Museum

Post Office-Sorting Area 12 General Exhibition 10 Convention Center-Exhibit Space 13 Restoration 17

Library BankOfficemdashBanking Activity Area 15 Card File and Cataloging 11 Religious Buildings

Stacks 17 Worship Pulpit Choir 24

Reading Area 12 Fellowship Hall 09

Hospital Retail

Emergency 27 Sales Area [For accent lighting see 93121(c)] 17

Recovery 08 Mall Concourse 17

Nurse Station 10 Sports Arena

ExamTreatment 15 Ring Sports Area 27

Pharmacy 12 Court Sports Area 23

Patient Room 07 Indoor Playing Field Area 14

Operating Room 22 Warehouse

Nursery 06 Fine Material Storage 14

Medical Supply 14 MediumBulky Material Storage 09

Physical Therapy 09 Parking GaragemdashGarage Area 02

Radiology 04 Transportation

LaundrymdashWashing 06 AirportmdashConcourse 06

AirTrainBusmdashBaggage Area 10

TerminalmdashTicket Counter 15

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 21

New Construction Lighting Power Density CodeRequirements ndash Building Area Method

Building Area Type 221 LPD (Wft2)

Automotive facility 09

Convention center 12

Courthouse 12

Dining bar loungeleisure 13

Dining cafeteriafast food 14

Dining family 16

Dormitory 1

Exercise center 1

Gymnasium 11

Health-care clinic 1

Hospital 12

Hotel 1

Library 13

Manufacturing facility 13

Motel 1

Motion picture theater 12

Building Area Type LPD (Wft2)

Multifamily 07

Museum 11

Office 1

Parking garage 03

Penitentiary 1

Performing arts theater 16

Policefire station 1

Post office 11

Religious building 13

Retail 15

Schooluniversity 12

Sports arena 11

Town hall 11

Transportation 1

Warehouse 08

Workshop 14

221 In cases where both a common space type and a building specific type are listed the building specific space type shall apply

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 22

Exterior New Construction LightingExterior New Construction savings over code lighting power density will be incentivized using custom lighting measure at $005kWh rate Participants must submit exterior lighting plans Submittals COMCHECK REPORT and lighting schedule for exterior lighting Savings are calculated from the LPD (Wsq ft) indicated below Additional information may be required based on the building exterior type and space description indicated below To contribute to incentive LEDs must satisfy program requirements for DLC Energy Star or equivalent listing

Required Documentation bull COMcheck Interior Lighting Report or equivalent analysis demonstrating space-by-space or

building area calculations bull Drawings showing lighting fixture layout bull Lighting fixture schedule sheet including fixture counts bull Fixture submittal or specification sheets showing model number and rated fixture wattage

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 23

Building Exterior Space Description LPD

Unco erect Pariki Ilg Area Parlurng ots arnd Drives 0 15 WfW

B i ing Grournds W al 1Yays lless Hlan 11] e 10 Wltirneru- 00

W a Nays 10 middot de or greater 112 W

Plaza a reas

Spec rest re areas

Stainh1ays 1ow 2

B i ing 8ntrames and Exits Ma efilbies m wr near foot of door width

Other doors 2o w 1r ear foot of door width

Ctmqpies and Overhimgs Free starndillg and a ched tmd 12s w m2 m bullerhangs

0 door sales Op en areas (ind udi Ilg ve id e sales 05 W lo )

street frontage far vehicle sales lots 21] W linear toot in addi middot on to open are-0bullmiddot lo~nce

B i ing facades 0 2 W tfl2 middot or eacil illumirnated N311 or surface

o r 5 0 Wllinear root fo r eac h m n inated N3l1 o r

surface length

Automated te lle r rnachmiddot es a lld 210 W per loca tion plus 91] night deposito liies W 1pernddiliorml A I middot per

1oca middot om

Eirltrances and gatehouse inspecliion 125 W ffl2 o middot uncovered slatiaBS a goo~ ed acir ies area

Load ing are-0s or law enforcement 0 5 W 2 of u rnco1bullered area fire ambu rnce and otiher emergency service ibullehmiddotctes

Drive-through w indOWs a taslrood 400 W per drive-Hlrough restaurants

Parking near 24 -h our retail 80111 W per main entry entmn ces

HVAC Equipment Air-Source Air Conditioners and Air-Source Heat Pumps New unitary air conditioning units or air source heat pumps that meet or exceed the qualifying cooling efficiency shown in the HVAC Incentives Worksheet are eligible for an incentive They can be either split systems or single package units The efficiency of split systems is based on an ARI reference number All packaged and split system cooling equipment must meet Air Conditioning and Refrigeration Institute (ARI) standards (210240 320 or 340360) be UL listed use a minimum ozone-depleting refrigerant (eg HCFC or HFC) All required efficiencies are based on the Consortium for Energy Efficiency (CEE) high-efficiency commercial air conditioning and heat pump specifications (wwwcee1org) A manufacturerrsquos specification sheet indicating the system efficiency must accompany the application Disposal of the existing unit

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 24

must comply with local codes and ordinances

Package Terminal Systems (Replacements) Package terminal air conditioners and packaged terminal heat pumps are through-the-wall self-contained units that are 2 tons (24000 Btuh) or less All EER values must be rated at 95degF outdoor dry-bulb temperature

Ductless Mini-Split Heat Pump lt54 Tons Incentives are offered for Ductless Mini-Split Heat Pump lt54 Tons with SEER rating greater than or equal to 120 and EER greater than or equal to 145 and HSPF greater than or equal to 90

Geothermal Heat Pump Geothermal equipment is a high-efficiency groundwater source water source or ground source heat pump system that meets or exceeds the energy efficiency requirements shown in the tables below These measures do not apply to heat pump systems coupled with non-heat pump systems such as chillers rooftop AC units boilers or cooling towers which must be filed as custom measures All HVAC applications other than comfort cooling and heating such as process cooling must also be applied for as custom measures

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 25

HVAC Heating Qualifying Incentive

Equipment Type and Cooling Capacity Cooling Qualifying Efficiency ($ per cooling Measure Code Efficiency

ton)

Air Cooled Air Conditioner

H01 lt 54 tons (lt 65000 Btuhr) 15 SEER NA $22

H02 lt 54 and lt 11 25 tons

125 IEER $22 (lt 65 000 Btuh and lt 135 000 Btuhr) NA

H03 lt11 25 and lt 20 tons

123 IEER NA $22 (lt 135000 Btuh and lt 240000 Btuhr)

H04 lt 20 and lt 6333 tons (~

11 1 IEER NA $22 240000 Btuh and lt 760000 Btuhr)

HOS ~ 6333 Ions (~ 760000 Btuhr) 103 IEER NA $22

Air Cooled Heat Pumps

H06 lt 54 tons (lt 65000 Btuhr) 143 SEER 87 HSPF $30

H07 lt 54 and lt 11 25 tons

123 IEER 3 3 COP $30 (lt 65000 Btuh and lt 135000 Btuhr)

HOS lt11 25 and lt 20 tons

1U IEER 3 2 COP $30 (lt 135000 Btuh and lt 240000 Btuhr)

H09 lt 2000 tons (240000 Btuhr) 105 IEER 3 2 COP $30

Packaged Terminal Systems (PTAC and PTHP) (PTHP only)

H10 lt 8000 Btuhr (lt066 tons) 11 8 EER 33 $17

H11 ~8000 and lt10500 Btuhr (~066 and lt 0875 tons) 11 4 EER 32 $17

H12 gt10500 Btuhr ( 875 tons) 107 EER 31 $17

H22 lt 54 tons (lt 65000 Btuhr) 121 EER 12 3 IEER NA $22

lt 54 and lt 11 25 tons 121 EER 12 3 IEER $22 H23

(lt 65000 Btuh and lt 135000 Btuhr) NA

H24 lt11 25 and lt 20 tons

120 EER 12 2 IEER $22 (lt 135000 Btuh and lt 240000 Btuhr) NA

H25 lt20 and lt 633 tons

119 EER 12 2 IEER $22 (lt 240000 Btuh and lt 760000 Btuhr) NA

H26 ~ 633 tons( lt760000 Btuhr) 110 EER 11 1 IEER NA

$22

HVAC Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 26

Other HVAC EquipmentHotel Guest Room Occupancy Sensor Incentives are offered for occupancy-based controls that control electric air conditioning air source heat pumps and or electric heating units for individual hotel rooms Systems with nonshyelectric heat are not eligible Sensors must be controlled by automatic occupancy detectors or a key-card system and the default setting for controlled units differ by at least 5 degrees (or shut the unit fan and heating or cooling off completely) from the operating set point during unshyoccupied periods The control system may also be tied into other electric loads such as lighting and plug loads to shut them off when occupancy is not sensed The incentive is per room Replacement or upgrades of existing occupancy-based controls are not eligible as a prescriptive incentive

Economizer Integrated Dual Enthalpy Economizer ControlsThis measure is targeted to non-residential establishments whose HVAC equipment is not equipped with a functional economizer

Circulation Fan High-Volume Low-SpeedFans must be greater than 16 feet in diameter and have variable speed control

ECM Circulation Fan This measure is targeted to non-residential customers whose air handling equipment currently uses a SP or PSC fan motor rather than an ECM This measure applies only to circulating fan motors of 1 HP or less Above 1 HP motors are governed by NEMA standards and would see little to no efficiency benefit by adding an ECM The targeted fan can supply heating or cooling only or both heating and cooling

ECM Circulation Pump This measure is targeted for replacement of a shaded pole or permanent split capacitor pump or motor with an electronically commutated pump or motor le75 HP

Retrocomissioning Cooling Systems Confined to chiller plant andor isolated packaged units For reservation must contain proposal with defined scope at equipment level that demonstrates energy savings For final approval required final commissioning report including raw data (TAB reports) demonstrating actual scope

This prescriptive measure can be used for facilities with maximum cooling demand less than 1687 tons Larger systems require the use of custom HVAC measure

Retrocomissioning Whole Building Covers all relevant major mechanical systems such as chiller plant air side systems compressed air andor process systems For reservation must contain proposal with defined scope at equipment level that demonstrates energy savings For final approval required final commissioning report including raw data (TAB reports) demonstrating actual scope

This prescriptive measure can be used for facilities less than 404858 square feet Larger facilities require the use of custom HVAC measure

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 27

Energy Management System For installing a web-based building automation system in existing buildings that currently have no digital automated HVAC controls or have outdated pneumatic control systems with inoperable time control functions Existing HVAC control systems must not have time-of-day scheduling Upgrading obsolete EMS HVAC system with inoperable time clock functions will be reviewed on a case-by-case basis for incentive eligibility This incentive cannot be combined with incentives for programmable thermostats or setback-setup controls Must include the controls strategy and a scaled floor-plan with controlled areas highlighted HVAC BAS systems must be new and include bull Central time clock control bull Web-based interface with PC-based controls and graphic bull Building performance Tracking bull Open-protocol architecture controls system shall consist of either LonTalk (ANSICEA 7091) or BACNet (ASHRAE ANSI 135) protocol being used between all controlled and controlling devices and every node on the network bull Minimum setback period must exceed 2200 hours per year bull A minimum setback space temperature of at least 10degF when heating and 5degF when cooling bull Ability to adjust schedules and settings remotely over the internet bull Report generation describing energy and operating trends

This prescriptive measure can be used for facilities with maximum cooling demand less than 456 tons Larger systems require the use of custom HVAC measure

Demand Controlled Ventilation New ventilation controls must use carbon dioxide levels to measure occupancy and modify the percentage of outside air based on occupancy levels Only buildings with space heating and cooling requirements are eligible Conditioned spaces must be kept between 65ordmF and 75ordmF during occupied operating hours Carbon dioxide sensors must be installed in conjunction with fully functioning motor operated outside air dampers Dual temperature air-side economizers with zone-level CO2 sensors for rooftop units are eligible

This prescriptive measure can be used for facilities with maximum cooling demand less than 2210 tons Larger systems require the use of custom HVAC measure

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 28

Other HVAC Measures- consult project manual for eligibility specifications HVAC

Measure Incentive Unit Quantity Incentive

Measure Code er Unit

H1 8 Hotel Guest Room Occupancy Sensor Room $20

H1 9 Economizer Integrated Dual Enthalpy Economizer Controls Ton $1 5

H20 Circulation Fan High-Volume Low-Speed Unit $30

H21 ECM Circulation Fan Fan $1 5

H27 ECM Circulation Pump Pump $50

H28 Retrocommissioning Cooling Systems

Ton $750

H29 Retrocommissioning Whole Buidling

Square Foot $010

H29 Energy Management System Ton $2500

H30 Demand Controlled Ventilation Ton $2500

Other HVAC Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 29

Unitary HVAC Chillers

Air-Cooled Chillers Water Cooled Positive Displacement Reciprocating Chillers and Water Cooled Centrifugal Chillers Chiller applications including existing multiple chiller configurations (including redundant or lsquostand-byrsquo chillers) existing chillers serving multiple load groups and chillers in industrial applications are defined as non-standard applications and must follow a site-specific custom protocol $005kWh) rate

Incentives are offered for chillers with an IPLV value (expressed in kW per ton) that is less than or equal to the qualifying efficiency shown in the table below The chiller efficiency rating must be based on ARI Standard 550590-2003 for IPLV conditions The chillers must meet ARI standards 550590-2003 be UL listed and use a minimum ozone-depleting refrigerant (eg HCFC or HFC) The ARI net capacity value should be used to determine the chiller tons A manufacturerrsquos specification sheet with the rated kWton-IPLV or COP-IPLV must accompany the application along with the four point performance data that is the basis for the IPLV The application must include a certification that the chiller is appropriately sized for site design load conditions

Chillers must satisfy efficiency requirements for both full load and IPLV efficiencies for either Path A or Path B The table shows the minimum efficiency ratings to qualify for the prescriptive incentive which must be consistent with the expected operating conditions of the efficient chiller For example if the efficient chiller satisfies Path A and generally performs at part load the appropriate baseline chiller efficiency is the IPLV value under Path A If the efficient chiller satisfies Path B and generally performs at full load the appropriate baseline chiller efficiency is the full load value under Path B Generally chillers operating above 70 percent load for a majority (50 or more) of operating hours should use Path A and chillers below 70 load for the majority of operating hours should use Path B

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 30

C3 lt 75 tons

C4 75 tons and lt 150 tons

cs ~ 150 tons and lt 300 tons C6 ~ 300 tons

Water Cooled Centrifugal Chillers C7 lt 300 tons CB ~ 300 tons and lt 600 tons

C9 ~ 600 tons

Path A

Qualifying Full Load Efficiency

Qualifying IPLV Efficiency

Path B

Qualifying Full Load Efficiency

Qualifying IPLV Efficiency

0780 kWton 0567 kWton 0800 kWton 0540 kWton

0775 kWton 0554 kWton 0790 kWton 0527 kWton

0680 kWton 0522 kWton 0718 kWton 0486 kWton 0620 kWton 0486 kWton 0639 kWton 0441 kWton

0634 kWton 0536 kWton 0639 kWton 0405 kWton 0576 kWton 0494 kWton 0600 kWton 0360 kWton

0570 kWton 0494 kWton 0590 kWton 0360 kWton

I

Incentive ($ton)

$17

$17

Unitary Chiller Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 31

Refrigeration

Anti-Sweat Heater Controls Incentives are offered for devices that sense the relative humidity in the air outside of the display case and cycles or turns off the glass door (if applicable) and frame anti-sweat heaters when the ambient dew point is below a preset set point Technologies that can turn off anti-sweat heaters based on sensing condensation (on the inner glass pane) also qualify Incentive is based on the number of doors

Evaporator Fan Controls This measure is for the installation of controls in medium temperature walk-in coolers The controller reduces airflow of the evaporator fans when there is no refrigerant flow The measure must control a minimum of 120 HP where fans operate continuously at full speed The measure also must reduce fan motor power by at least 75 during the off cycle This measure is not applicable if any of the following conditions apply 1) Compressor runs all the time with high duty cycle 2) Evaporator fan does not run at full speed all the time 3) Evaporator fan motor runs on poly-phase power 4) Evaporator fan motor is not shaded-pole or permanent split capacitor (PSC) 5) Evaporator fan does not use off-cycle or time-off defrost

Floating Head Pressure Controls Controls must vary head pressure to adjust condensing temperatures in relation to outdoor air temperature Must replace existing constant pressure or manually controlled systems to achieve reduced head pressure in order to maintain a minimum saturated condensing temperature of 70 degF or a 20 degF variance below design heat pressure during mild weather conditions Compressor size must be at least 5 HP

Automatic Door Closers for Walk-In Coolers and Freezers The auto-closer should be applied to the main insulated opaque door(s) of a walk-in cooler or freezer The auto-closer must be able to firmly close that door when it is within one inch of full closure This must be a newly installed automatic door closer replacements on previously installed door closers are not eligible for an incentive

EC Motor for Walk-inReach-in Refrigerated cases or Freezer cases Incentives are offered for replacement of an existing standard-efficiency shaded-pole or permanent split capacitor evaporator fan motor in refrigerated display cases or fan coil in walk-ins The replacement unit must be an Electronically Commutated Motor (ECM) This measure cannot be used in conjunction with the Evaporator Fan Controller measure

ENERGY STAR Solid Door Freezer and Glass Door Freezer and Refrigerators Incentives are offered for replacement of existing self-contained refrigerators and freezers with units that are ENERGY STARreg listed Only units with built-in refrigeration systems are qualified Units with remote refrigeration systems or units do not qualify Customers must provide proof that the appliance meets the CEE or ENERGY STAR efficiency specifications using ASHRAE Standard 72-2005 (38degF plusmn 2degF) Incentive is per unit

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 32

Refrigeration Suction Pipe Insulation 1 Must insulate bare refrigeration suction lines of 1 58 inches in diameter or less on existing equipment only 2 Cooler lines require frac34 inch of flexible closed-cell nitrite rubber or an equivalent insulation 3 Freezer lines require 1-inch of flexible closed-cell nitrite rubber or an equivalent insulation 4 Insulation exposed to the outdoors must be protected from the weather (ie jacketed with a medium-gauge aluminum jacket)

Night Cover 1 Must install a cover on an existing open refrigerated display case to decrease its cooling load during off hours 2 The equipment manufacturer must not object to the use of night covers for the existing display case model 3 This rebate is based on the linear footage of the installed 4 The cover must be applied for a period of at least six hours

Strip Curtain on Walk-In CoolerFreezer 1 New strip curtains or plastic swinging doors must be installed on doorways of refrigerated spaces (conditioned to less than 50deg F) 2 Rebate is based on the linear footage of the doorway that the strip curtains are being installed in 3 Opening between the strip curtain and bottom of doorway must be no larger than 1 inch 4 Strips must have an overlay greater than 1 inch

Evaporator Coil Defrost Control 1The current system must include an operating electric defrost system with a functional electroshymechanical time clock 2 Evaporator coil temperature and pressure must be monitored by controller in order to determine optimal defrost cycles 3 New intelligent control systems to control the defrost systems will typically replace timed- defrost controls

Variable Speed Refrigeration Compressor This measure VSD control for refrigeration systems and its eligibility targets applies to retrofit construction in the commercial and industrial building sectors it is most applicable to grocery stores or food processing applications with refrigeration systems This protocol is for a VSD control system replacing a slide valve control system

Add Doors to Open Refrigerated Cases The eligible retrofit equipment is either no sweat doors or doors with anti-sweat heaters If a lighting retrofit is included with the new doors it must consume the same amount of energy or less energy than the old lighting Upgrades to lighting or other system components should be processed separately Horizontal cases are not eligible and should be processed as custom

Door Gaskets PECO Smart Ideas For Your Business CampI Program Application Manual

Q1 2017 pg 33

This measure is applicable to commercial refrigeration and applies to the replacement of worn-out gaskets with new better-fitting gaskets Applicable gaskets include those located on the doors of walk-in andor reach-in coolers and freezers This protocol applies to the main doors of both low temperature (ldquofreezerrdquo ndash below 32 degF) and medium temperature (ldquocoolerrdquo ndash above 32 degF) walk-ins

Zero Energy Doors For this measure a no-heatlow-heat clear glass door must be installed on an upright display case It is limited to door heights of 57 inches or more Doors must have either heat reflective treated glass be gas filled or both This measure applies to low temperature cases onlymdashthose with a case temperature below 0degF Doors must have 3 or more panes Total door rail glass and frame heater amperage ( 120 volt) cannot exceed 039413 amps per door for low temperature display cases Rebate is based on the door width (not including case frame)

Air Cooled Refrigeration Condenser Approach temperature lt8F for low temperature loads lt13F for medium temperature loads

Oversized Condenser with VFD New standalone condenser must no more than 150 larger than load

Case Light Occupancy Controls Acceptable for freezer or refrigerated cases as well as open cases or cases with doors

LED Open Case Lighting For replacing open case T8 or T12 fluorescent fixtures with DLC listed LEDs on refrigerators coolers and freezers

LED Enclosed Case Lighting Refrigerated LED case lighting with or without motion sensors on enclosed refrigerated vertical displays The baseline equipment is assumed to be cases with uncontrolled T8 or T12 linear fluorescent lamps

LED Enclosed Case Lighting Freezer LED case lighting with or without motion sensors on enclosed freezer vertical displays The baseline equipment is assumed to be cases with uncontrolled T8 or T12 linear fluorescent lamps

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 34

Refrigeration Measures Ref Measure

Measure Incentive Unit IncentiveUnit Code R01 Anti-Sweat Heater Controls Door $30

R02 Evaporator Fan Controls Controller $50

R03 Floating-head Pressure Controls HP $20

R04 Automatic Door Closers fo r Walk-in Coolers Door $75

R05 Automatic Door Closers fo r Walk-in Freezers Door $75

R06 Evaporator Fan EC Motor fo r Reach- in Cases Motor $35

RO Evaporator Fan EC Motor fo r Walk-in Cases Motor $50

R08 ENERGY STARreg Glass Door Freezer lt15 Cu Ft Unit $100

R09 ENERGY STARreg Glass Door Freezer 15- 49 Cu Ft Unit $125

R10 ENERGY STARreg Glass Door Freezer ~ 50 Cu Ft Unit $145

R11 ENERGY STARreg Solid Door Freezer Unit $75

R12 ENERGY STARreg Glass Door Refrigerator lt50 Cu Ft Unit $30

R13 ENERGY STARreg Glass Door Refrigerator gt= 50 Cu Ft Unit $50

K14 t NtKGY ~ I AKreg ~Olld Uoor Ketngerator $ OU Cu t-t Unit $~0

R15 Suction Pipe Insulation Walk-in Coolers Linear Foot $050

R16 Suction Pipe Insulation Walk in Freezers Linear Foot $075

R17 Night Cover Linear Foot $800

R18 Strip Curtains on Walk-in Cooler Linear Foot $250

R19 Evaporator Coil Defrost Control Controller $7500

R20 Variable Speed Refrigeration Compressor Compressor $85

R21 Add Doors to Open Refrigerated Cases Door $55

R22 Door Gaskets Door $250

R23 Zero Energy Doors Door $50

R24 A ir Cooled Refrigeration Condenser Ton $10

R25 Oversized Condenser with VFD Ton $10

R26 Case Light Occupancy Controls Door $8

R27 LED Open Cose Lighting Cose $10

R28 LED Enclosed Case Lighting Refrigerated Door $30

R30 LED Enclosed Case Lighting Freezer Door $30

Refrigeration Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 35

Food Service Beverage and Snack Machine Controls Incentives are offered for refrigerated vending machines that contain non-perishable bottled and canned beverages Controller for both types of systems must include a passive infrared occupancy sensor to turn off fluorescent lights and other energized machine systems when the surrounding area is unoccupied for 15 minutes or longer For the refrigerated machines the control logic may include periodic power up at 2-hour intervals or longer to maintain product temperature and provide compressor protection

ENERGY STARreg Refrigerated Beverage Vending Machines Incentives are offered for ENERGY STARreg beverage vending machines Qualifying machines can be found at httpswwwenergystargovproductsothervending_machines

ENERGY STARreg Electric Steam Cooker This measure applies to the installation of electric ENERGY STAR steam cookers as either a new item or replacement for an existing unit Gas steam cookers are not eligible The steam cookers must meet minimum ENERGY STAR efficiency requirements A qualifying steam cooker must meet a minimum cooking efficiency of 50 percent and meet idle energy rates specified by pan capacity

ENERGY STARreg Electric Combination Oven This measure applies to electric ovens capable of handling single 12 x 20 x 25 pan per rack

ENERGY STARreg Commercial Convection Oven The oven must meet or exceed heavy load potato cooking energy efficiency of greater than 70 utilizing ASTM Standard F149 Applies only to electric ovens

ENERGY STARreg Commercial Fryers The commercial fryer must have a tested heavy load (French fry for large vats) cooking energy efficiency of greater than 80 utilizing American Society for Testing and Materials (ASTM) Standard F1361 for commercial fryers and ASTM Standard F2144 for large vat fryers Multiple vat configurations are paid per qualifying vat ENERGY STAR maintains a list of qualifying products and specifications at httpwwwenergystargov

ENERGY STARreg Commercial Hot Holding Cabinet Energy STAR rating electric

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 36

Food Service amp Other Measures FoodOther

Measure Incentive Unit Incentive

Measure Code Unit

F01 Beverage Machine Controls Unit $25

F02 Snack Machine Controls Unit $20

F03 ENERGY STARreg Refrigerated Beverage Vending Machir Unit $125

F04 ENERGY STARreg Commerc ial Steam Cooker Unit $200

F05 ENERGY STARreg Electric Combination Oven Unit $200

F06 ENERGY STARreg Commercial Electric Convection Oven Unit $150

F07 ENERGY STARreg Commerc ial Fryers Unit $100

F08 ENERGY STARregCommerc ial Hot Holding Cabinet Unit $200

Food Service Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 37

Motors and Variable Frequency DrivesEarly Replacement Motors For constant speed and uniformly loaded motors this measure applies to the replacement of old motors with new energy efficient motors of the same rated horsepower Old motors must be less than 15 years Replacements where the old motor and new motor have different horsepower ratings are considered custom measures Motors with variable speeds variable loading or industrial-specific applications are also considered custom measures

Motors Incentive Table Motors

Measure Code

HP Incentive per Motor

M01 15 - 10 $40 M02 11 - 50 $100 M03 51-100 $150 M04 gt100 $300

Only VFDs on unitary systems are eligible Non-unitary systems must be submitted as a custom measure Soft start motors are not eligible

Variable Frequency Drives on HVAC Fan Applications Incentives are offered for installing VFDs on existing HVAC fans that do not have pre-existing VFDs This measure applies to HVAC supply and return fans only All other fans including cooling tower fans must be submitted as custom measures Manually fixed speed settings on HVAC fans must be submitted via custom application The VFD must control motor speed automatically in response to pressure flow temperature or other variable signal The installation of a VSD must accompany the permanent removal or disabling of any throttling devices such as inlet vanes bypass dampers and throttling valves etc The incentive is offered per controlled HP

Variable Frequency Drives on Pump Applications Incentives are offered for installing VFDs on existing chilled water pumps and heating hot water pumps that do not have existing VFDs This measure applies to chilled water pumps and heating hot water pumps only All other pumps must be submitted as custom measures Manually fixed speed settings on pumps must be submitted via custom application The VFD must control motor speed automatically in response to pressure flow temperature or other variable signal The installation of a VSD must accompany the permanent removal or disabling of any throttling devices such as throttling valves The incentive is offered per controlled HP

Variable Speed Control for Kitchen Exhaust Hoods The measure consists of installing a new VSD in conjunction with a sensor control system that varies the exhaust rate of kitchen ventilation (exhaust andor makeup air fans) based on the heat and effluent output from the cooking appliances (ie the more heat and smokevapors generated the more ventilation needed) This involves installing a temperature sensor in the hood exhaust collar andor an optic sensor on the end of the hood that senses cooking conditions and allows the system to automatically vary the rate of exhaust to match requirements by adjusting the fan speed accordingly

Variable Speed Drives for Process or Other Equipment VFD must be used in conjunction with a process (non HVAC) application To qualify for this incentive the driven equipment must operate at least 2000 hours per year Redundant or back- up units do not qualify VFDs replacing existing VFDs do not qualify The VFD must control motor

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 38

speed automatically in response to pressure flow temperature or other variable signal VFDs installed as ldquosoft startrdquo without automatic manual closed loop speed control do not qualify The installation of a VFD must accompany the permanent removal or disabling of any throttling devices such as throttling valves The incentive is per controlled HP and only applies to controlled motors less than 50 HP

VSDVFD Incentives Table VFD

Measure Code

Measure Unit Incentive per Unit

Fan Application

V01 VFD on HVAC Fan HP $25 Pump Application

Variable Speed Control for Kitchen Exhaust Hoods

Variable Speed Drives for Process or Other Equipment

V02 VFD on Chilled Water Pumps HP $25 V03 VFD on Heating Hot Water Pumps HP $25

V04 Kitchen Exhaust Fan Retrofit Hood HP $500

V05 Process Motor lt 50 HP HP $50

Domestic Hot Water Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater This measure documents the energy savings attributed to converting from a standard electric water heater to an ENERGY STAR natural gaspropane-fired water heater or a standard oil-fired water heater with an Energy Factor of 0585

Heat Pump Water Heater This includes heat pump water heaters with energy factors meeting ENERGY STAR criteria The measure described here involves a direct retrofit of a resistive electric water heater with a heat pump water heater It does not cover systems where the heat pump is a pre-heater or is combined with other water heating sources More complicated installations can be treated as custom projects

Low Flow Pre-Rinse Spray Valve This measure applies to efficient low flow pre-rinse sprayers in grocery and food service applications The most likely areas of application are kitchens in restaurants and hotels Only premises with electric water heating may qualify for this incentive In addition the replacement pre-rinse spray nozzle must use less than 16 gallons per minute with a cleanability performance of 26 seconds per plate or less Low flow pre-rinse sprayers reduce hot water usage and save energy associated with water heating

Domestic Hot Water Incentive Table

Measure Code Measure Unit Retrofit Incentive per

Unit

W01 Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater Unit $100

W02 Heat Pump Water Heater Unit $100 W03 Low-Flow Pre-Rinse Spray Valve Valve $17

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 39

Compressed Air SystemsNo-loss Condensate Drain No-loss Condensate Drains are controlled by a sensor that monitors the level of condensate and only open when there is a need to drain condensate They close before compressed air is allowed to escape This measure is targeted to non-residential customers whose equipment is a timed drain that operates on a pre-set schedule Acceptable baseline conditions are compressed air systems with standard condensate drains operated by a solenoid and timer

Air-Entraining air nozzle This measure is targeted to non-residential customers whose compressed air equipment uses stationary air nozzles in a production application with an open copper tube of 18rdquo or 14rdquo orifice diameter Energy efficient conditions require replacement of an inefficient non-air entraining air nozzle with an energy efficient air-entraining air nozzle that use less than 15 CFM at 100 psi for industrial applications

Storage Tanks for LoadNo Load Screw Compressors This measure protocol applies to the installation of air receivers with pressureflow controls to loadno load compressors Loadno load compressors unload when there is low demand The process of unloading is done over a period of time to avoid foaming of the lubrication oil Using a storage tank with pressureflow control will buffer the air demands on the compressor Reducing the number of cycles in turn reduces the number of transition times from load to no load and saves energy The baseline equipment is a loadno load compressor with a 1 galcfm storage ratio or a modulating compressor with blowdown The high efficiency equipment is a loadno load compressor with a minimum storage ratio of 4 gallons of storage per cfm

Cycling Refrigerated Thermal Mass Dryer When air is compressed water vapor in the air condenses and collects in liquid form Some of this condensate collects in the air distribution system and can contaminate downstream components such as air tools with rust oil and pipe debris Refrigerated air dryers remove the water vapor by cooling the air to its dew point and separating the condensate Changes in production and seasonal variations in ambient air temperature lead to partial loading conditions on the dryer Standard air dryers use a hot gas bypass system that is inefficient at partial loads A Cycling Thermal Mass Dryer uses a thermal storage medium to store cooling capacity when the system is operated at partial loads allowing the dryer refrigerant compressor to cycle

This measure is targeted to non-residential customers whose equipment is a non-cycling refrigerated air dryer with a capacity of 600 cfm or below Acceptable baseline conditions are a non-cycling (eg continuous) air dryer with a capacity of 600 cfm or below The replacement of desiccant deliquescent heat-of-compression membrane or other types of dryers does not qualify under this measure

Variable Speed Air Compressor This type of compressor uses a special drive to control the speed (RPM) of the unit which in turn saves energy compared to a fixed speed equivalent

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 40

No-loss Condensate Drain Air-Entraining Air Nozzle Cycling Refrigerated Thermal Mass Dryer

Compressor Incentive per

Equipment Type Units Quantity Daily Operating Unit

Hours

CA04 Storage Tanks for LoadNo Load Screw

Compressor HP $10 Compressors

CA05 Variable Speed Air Compressor

Compressor HP $30

CA06 Compressed Air System Optimization

Compressor HP $50

Compressed Air System Optimization The submitted optimization measures must be identified in an Air System Audit or equivalent study to be eligible The measures must demonstrate energy savings as evaluated by a Program Engineer Additionally measures must also fall under one or more of the category below to be eligible

1) Install storage Receivers (new receivers only replacing existing storage receivers are ineligible)

2) Compressor control (must demonstrate improvement in partial load efficiency of the compress air system including reduceeliminate partially loaded units)

3) Dryer control 4) Source pressure reduction 5) Right-sizing distribution components such as piping filters regulators

connectors and hoses (routine maintenance replacements are ineligible) 6) Leakage detection and repair 7) Eliminate low-efficiency end-usages of compressed air 8) Heat recovery (most reduce electricity consumption of the replaced heat source)

Compressed Air Systems Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 41

lt65000 Btuh

~ 65000 Btuh and lt135000 Btuh

135000 Btuhand lt240000 Btuh

240000 Btuh and lt760000 Btuh

760000 Btuh

154

142

135

125

123

Chiller Capacity Path APath B efficiency (kWton )

lt 150 tons

~150 tons and lt300 tons

300 tons and lt400 tons

400 tons and lt600 tons

600 tons

lt75 tons

~75 tons and lt150 tons

~150 tons and lt300 tons

~300 tons and lt600 tons

600 tons

0610 FU0695 FL and 0550 IPLV0440 IPLV

0610 FU0635 FL and 0550 IPLV0400 IPLV

0560 FU0595 FL and 0520 IPLV0390 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

Path APath B efficiency (kWton )

0750 FU0780 FL and 0600 IPLV0500 IPLV

0720 FU0750 FL and 0560 IPLV0490 IPLV

0660 FU0680 FL and 0540 IPLV0440 IPLV

0610 FU0625 FL and 0520 IPLV0410 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

Data Centers Data Center incentives are available for facilities ranging in size from office server closets to large standalone facilities

Air Cooled Chiller Path APath B EER (BtuWh) lt150 tons 101 FL97 FL and 137 IPLV158 IPLV ge150 tons 101 FL97 FL and 140 IPLV161 IPLV

Air Cooled Chiller without Condenser Air-cooled chillers without condenser must be rated with matching condensers and comply with air-cooled chiller efficiency requirements

Computer Room Air Conditioner

Computer Room Air Handler Variable Speed Replacing constant speed CRAH with VSD CRAH

Water Cooled Centrifugal Chiller

Water Cooled Positive Displacement or Reciprocating Chiller

Uninterruptible Power Supply Must be Energy Star Certified UPS or have full load efficiency rating

ge948 for 20-100 kVA ge978for ge100 kVA

Mainframe Refresh The rated efficiency of the replacement Mainframes power supply must be at least 8 more

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 42

- Equipment Type Units IncentiveUnit

D1 Air Cooled Chiller Ton $4000 D2 Air Cooled Chiller W ithout Condenser Ton $2000 D3 Computer Room Air Conditioner Ton $3000 D4 Computer Room Air Handler Variable Speed Ton $1000 D5 Water Cooled Centrifugal Chiller Ton $3000 D6 Water Cooled Positive Displacement or Reciprocatin $3000 D7 Uninterruptible Power Supply 20-100 kVA $1000 D8 Uninterruptible Power Supply gt 100 kVA $1000 D9 Mainframe Refresh $2000

D10 Server Refresh $2000 D11 PC Power Managment System $600 D12 HVAC System Optimization $005 D1 3 HoUCold Aisle Containment kWh saved $005 D14 Server Virtualization kW reduction $40000 D1 5 Thin Clients Units $500

efficient compared to the existing Mainframes power supply The replacement Mainframe if Inactive must be decommissioned and removed from the Data Center

Server Refresh Replacement servers must be ENERGY STARreg certified Replacement servers power supply must be 5 more efficiency compared to the power supply of the replaced servers The replaced server must be decommissioned and removed from the data center

HVAC System Optimization Final system must have these features

-Implementation of free cooling by the addition of an economizer system -Conversion of constant speed CRACCRAH into variable speed operations using VFDs and additional control functionalities and -Elevation of exhaust air temperature

HotCold Aisle Containment Includes both Hot and Cold Aisles Installing new containment measures not replacing already existed aisle containment Plenum-only installations not eligible Must result in higher difference between the return air (hot aisle) and supply air (cold aisle) temperatures measured at rack intake and exhaust locations

Server Virtualization Minimum of consolidating 5 Servers virtualized into one Server The virtualized servers if inactive are removed from the Data Center

Thin Clients Must be ENERGY STAR certified thin clients Decommissioned clients are removed from the Data Center

Data Center Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 43

Whole Building Systems Whole Building Systems Approach

The Whole Building Systems approach is intended to encourage integrated energy efficient designs by providing enhanced incentives to the customer who addresses overall energy performance Owners of eligible and qualifying new construction and major renovation projects can receive Whole Building Systems incentives when energy modeling indicates the projectrsquos performance is over 10 better than the ASHRAE 901-2007 Savings from eligible electric end-uses in kilowatt hours define the amount of financial incentive Energy savings achieved through renewable energy sources are not counted toward project energy savings and are not included in the savings basis Incentive reservations obtained during the design phase of a project will be honored for up to 24 months

How to Apply for Whole Building Systems Incentives Before construction begins bull A Pre-notification Application must be submitted documenting the Owners intention to

seek Whole Building Systems incentives bull The Owner must confirm the goals and energy efficiency strategies being pursued by the

design team on the completed Pre-notification Worksheet (Checklist tab) and in the project Summary (Whole Building Performance Summary tab)

bull Submit executable building modeling software files bull Submit the Whole Building Performance Summary worksheet energy simulation model

inputs and outputs and supporting documentation bull Receive confirmation and eligibility notification from the PECO Smart Ideas team and

receive an incentive reservation bull The final incentive paid may differ from the reserved incentive amount The final

incentive will be calculated based on site-verified equipment installation and performance The Owners final application and complete documentation must be received within 6 months of equipment installation or certificate of occupancy whichever is later

bull An executable energy model and model output demonstrating compliance with the criteria of ASHRAE 901-2007 Appendix G will be required and the equipment data sheets LED lighting fixtures must be on the DLC or Energy STAR qualified products list (QPL) to be eligible LED fixtures not on the DLC or Energy STAR QPL has the option of submitting LM79 and LM80 test reports for evaluation against DLC and Energy STAR eligibility criteria

During the construction period bull Owner and design team continue to work closely with their chosen contractor to assure

energy efficiency measures are included and installed in the completed building

When the building is constructed and operational bull Complete the Owner final application Request an equipment verification site visit by the

PECO Smart Ideas team Equipment must be installed and fully operational o Program staff will schedule a site visit and utilize submitted documentation and

measurement tools to verify that the installation follows the submitted energy simulation model

bull When PECO confirms that there are no significant changes to the installed equipment payment of the reserved incentive will be made to the Owner within 6 weeks

bull If changes from the proposed design energy simulation are found the Owner and design team will be notified of the reduced incentive amount a period of 20 calendar days will

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 44

Improvement Incentive per Sq Ft

over Code

~11 to lt20 $0155

~20 to lt30 $0233

~30 to lt40 $0350

~40 to lt60 $0525

~60 $0700

be allowed for supplemental information to be provided if no additional information is received by PECO Smart Ideas team the reduced incentive payments will be made and sent to the Owner if additional clarification and information is available program staff will work diligently to resolve the discrepancies and arrive at a reasonable incentive adjustment with the customer

Payments made by PECO Smart Ideas are final

Customer Eligibility The Owner of the proposed new building project must be a customer of PECO and receive delivery of electric service from PECO to receive kilowatt-hour based incentives Please note that electricity supply can be provided by any vendor

Project Eligibility bull The project must be a new construction or major renovation Major renovations involving

the removal and redesign of at least two building systems (such as interior lighting and mechanical systems) may apply for Whole Building Systems incentives

bull To qualify for incentives projects must demonstrate energy efficiency enhancements that achieve at least 11 improvement in the proposed design versus the standard baseline

bull The Owner must submit a Pre-approval Application to the program at the stage where changes for increased energy efficiency are still feasible and construction has not been completed

bull Projects receiving Whole Building Systems incentives are not eligible to receive other incentives such as the prescriptive or custom program incentives for the same scope

bull Project components that are NOT eligible for consideration as a basis for PECO Smart Ideas include the following o Alternative fuel sources (eg use of gas or oil equipment in lieu of electric) Please note

that combined heat and power (CHP) systems will be incentivized for the electricity they produce

o Renewable energy sources (eg solar wind biomass) bull Ineligible savings include exterior lighting process receptacle miscellaneous loads and

other unregulated end-uses Custom incentives are available for new construction exterior lighting

Whole Building Systems Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 45

Custom Project Specifications Instructions for Energy Savings Calculations for Custom Projects Custom projects must involve measures that result in a reduction in electric energy use (kWh) Electricity savings may result from either efficiency improvements or fuel switching Custom Incentives are based on the first year kilowatt-hour savings Custom applications must be accompanied by detailed engineering calculations that document the annual total energy savings

The following serve as guidelines for the minimum required documentation

Equipment Information Submittals bull A list of the present and proposed equipment and components to be installed

including manufacturerrsquos catalogmodel number bull Manufacturerrsquos specification sheets showing capacities and performance for all major

components

Energy Savings Calculations Provide calculations documenting the predicted energy consumption of the existing (or baseline) and proposed system using appropriate analytical tools and clearly stated assumptions Calculations may be performed by ldquohandrdquo but spreadsheet analysis or more rigorous modeling is preferred All analysis should be provided in electronic format All assumptions such as operating hours existing and proposed equipment operational details must be presented Engineering algorithms and procedures from recognized technical organizations such as ASHRAE SMACNA ANSI etc must be used Use rated performance factors tested under accepted procedures specified by recognized rating agencies such as AHRI ANSI ASTM etc Provide an explanation when equipment performance rating conditions vary from standard conditions

In support of the calculations extensive documentation must be provided that provides the basis for the savings estimates The documentation must provide information on the equipment operating schedule daily and seasonal load profile and baseline AND energy efficient equipment performance at the operating loads Typical documentation for custom projects often includes bull Engineering or architectural drawings and ldquoequipment schedulerdquo sheets bull Component specification sheets that include part load efficiency or performance

factors bull Spreadsheet calculations or inputoutput files and results from system modeling or

other engineering analysis using accepted engineering algorithms and practices bull Log sheets trend logs from a building management system or other operating

documentation that are often necessary to document operating hours and equipment loading and used as a basis for the calculations (in some cases short term monitoring may be required to document the load profile)

bull Control sequence of operations that are necessary where controls play a part in the savings equation

Additional documentation other than that described in the application may be required for program participation Larger projects may also require pre- and post-project sub metering or monitoring of loads andor power input as part of another measurement and verification activity to demonstrate the actual energy savings that are realized

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 46

Baseline for Custom Analysis Where equipment is replaced prior to the end of its rated service life in order to achieve energy savings the existing equipment performance may be used as the baseline in the energy savings calculations Where equipment is replaced due to failure or for other reasons (such as obsolescence or a need for more capacity) the baseline performance used in the savings calculation should be either the minimum performance that would be required by code for that equipment type and application (where a code applies) or the performance of the equipment that would have been selected as the customers standard practice when a code does not apply

Baseline or Existing System Summary On custom worksheet on application form include make model number name plate information (such as operating voltage and rated full load amps) rated capacity quantities equipment condition and age facility operating hours equipment operating schedule and load curves If needed attach separate sheets

All decisions regarding incentives for custom projects are in the sole discretion of PECO

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 47

APPENDIX PROGRAM UPDATES SUMMARY (Q1 2017) Multifamily Nursing Home and Assisted Living retrofit customers need to apply for incentives through the PECO Smart Ideas Multi-Family Program administered by Franklin Energy For more information please contact Taylor Adler at tadlerfranklinenergycom or call 1-844-4BIZ-SAVE Multifamily Nursing Home and Assisted Living new construction customers can proceed with applying for incentives here

Revised Incentives

Data Centers

Measure Incentive Effective Immediately Previous Incentive

Air-cooled chiller for data centers $40ton $10ton Air-cooled chiller without condenser for data centers $20ton $10ton

Computer room air conditioner $30ton $7ton Water-cooled centrifugal chiller for data centers $30ton $5ton Water-cooled positive displacement or reciprocating chiller for data centers

$30ton $5ton

Uninterruptible power supply 20-100 kVA $10kVA $6kVA Uninterruptible power supply gt100 kVA $10kVA $1kVA Mainframe refresh $20kW installed $5kW installed Server refresh $20kW installed $4kW installed Server virtualization $400kW reduction $4kW reduction Thin clients $5units $4units

Lighting (Effective Immediately)

Measure Incentive Effective Immediately Specification Previous

Incentive Specification

New construction exterior LED outdoor flood light LED parking garage and canopy lighting LED polearm mounted parking and roadway lighting LED wall mount fixture

$005kWh (custom)

Lighting Power Density (LPD) Requirements Unchanged

$10-54 fixture

Lighting Power Density (LPD) (Wft2) by Space Type or Building Area

LED Replacement Lamps (Tubes) 2

$250lamp 5 Min Watts Reduced

$250lamp 6 Min Watts Reduced

LED Replacement Lamps (Tubes) 4

$400lamp 10 Min Watts Reduced

$400lamp 12 Min Watts Reduced

Permanent Fixture Removal $010Watt removed

Clarification of calculation to represent actual Wattage removed

$010Watt removed

Lighting (Effective 6117)

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 48

Measure Incentive Effective 6117 Specification Previous

Incentive Previous Specification

Interior LED high-bay fixtures andor retrofit kits if lt 20000 LED Lumens

$50fixture 150 Min Watts Reduced

$75fixture 150 Min Watts Reduced

Interior LED high-bay fixtures andor retrofit kits if gt 20000 LED Lumens

$75fixture 225 Min Watts Reduced

$75fixture 150 Min Watts Reduced

New Incentives

Compressed Air

Measure New Incentive Effective Immediately Variable speed air compressor $30compressor HP Compressed air system optimization $50compressor HP

HVAC

Measure New Incentive Effective Immediately ECM circulation pump $50pump Retro-commissioning cooling systems $750ton Retro-commissioning whole building $010square foot Energy management system $25ton Demand controlled ventilation $25ton Water-cooled air conditioner $22ton

Food Service

Measure New Incentive Effective Immediately Combination oven $200unit ENERGY STARreg commercial convection oven $150unit ENERGY STARreg commercial fryers $100unit ENERGY STARreg commercial hot holding cabinet $200unit

Refrigeration

Measure New Incentive Effective Immediately Air-cooled refrigeration condenser $10ton Oversized condenser with VFD $10ton Case light occupancy controls $750door

Lighting

Measure New Incentive Effective Immediately Interior central lighting controls $00175sq foot

Motors and Drives

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 49

-

Measure New Incentive Effective Immediately VFD for dust collection system motor $50HP

Application Clarifications and Revised Requirements

Clarification of LED Eligibility for New Construction or Retrofit Projects

LED Eligibility is determined by whether lighting products are listed in either the DesignLights Consortium (DLC) Qualified Products List of commercial-grade LED luminaires or the US Environmental Protection Agency database of ENERGY STAR certified products For products not yet listed contractors may submit LM79 and LM80 test reports PECO Smart Ideas engineers will review test reports to determine if the product in question meets performance specifications

Revised W 9 Requirement

W-9 forms EIN numbers are no longer required

Deletion of erroneous statement in New Construction Lighting

The following statement from previous Business Manual has been deleted ldquoThe minimum lighting power density used to calculate the incentive shall be no lower than 50 of the ASHRAE 901-2007 valuerdquo

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 50

  • Commercial amp Industrial Program Application Manual
    • Follow This Easy Process
      • Pre-Approval Application Checklist
      • Final Application Checklist
          • Terms and Conditions
            • Program Effective Dates
            • Program and Project Eligibility
            • Incentive Payment Limits
            • Application Review Process
            • Inspections andor PUCrsquos Statewide Program Evaluation
            • Requirements for Custom Project Electricity Savings Calculation
            • Tax Liability
            • No Endorsement
            • Warranties
            • Limitation of Liability
            • Assignment
            • Customerrsquos Certification
            • Termination
            • Acknowledgement
              • Retrofit Lighting Solutions
                • General Linear Fluorescent Lamp and Ballast Specification Requirements
                • LED Lamps and Fixtures
                • Minimum Watts Reduced
                • Linear LED (Tubes)
                • Permanent Fixture Removal
                  • LED Traffic Signals
                    • LED Traffic Signals Incentive Table
                      • New Construction Lighting Specifications
                        • New Construction Lighting Incentives Table
                          • New Construction Lighting Power Density Code
                              • Exterior New Construction Lighting
                              • HVAC Equipment
                                • Air-Source Air Conditioners and Air-Source Heat Pumps
                                • Package Terminal Systems (Replacements)
                                • Ductless Mini-Split Heat Pump lt54 Tons
                                • Geothermal Heat Pump
                                  • Other HVAC Equipment
                                    • Hotel Guest Room Occupancy Sensor
                                    • ECM Circulation Fan
                                    • ECM Circulation Pump
                                    • Retrocomissioning Cooling Systems
                                    • Retrocomissioning Whole Building
                                    • Energy Management System
                                    • Demand Controlled Ventilation
                                    • Other HVAC Incentives Table
                                      • Unitary HVAC Chillers
                                        • Air-Cooled Chillers Water Cooled Positive Displacement Reciprocating Chillers and Water Cooled Centrifugal Chillers
                                          • Refrigeration
                                            • Anti-Sweat Heater Controls
                                            • Evaporator Fan Controls
                                            • Floating Head Pressure Controls
                                            • Automatic Door Closers for Walk-In Coolers and Freezers
                                            • EC Motor for Walk-inReach-in Refrigerated cases or Freezer cases
                                            • ENERGY STAR Solid Door Freezer and Glass Door Freezer and Refrigerators
                                            • Refrigeration Suction Pipe Insulation
                                            • Night Cover
                                            • Strip Curtain on Walk-In CoolerFreezer
                                            • Evaporator Coil Defrost Control
                                            • Variable Speed Refrigeration Compressor
                                            • Add Doors to Open Refrigerated Cases
                                            • Door Gaskets
                                            • Zero Energy Doors
                                            • Air Cooled Refrigeration Condenser
                                            • Oversized Condenser with VFD
                                            • Case Light Occupancy Controls
                                            • LED Open Case Lighting
                                            • LED Enclosed Case Lighting Refrigerated
                                            • LED Enclosed Case Lighting Freezer
                                              • Food Service
                                                • Beverage and Snack Machine Controls
                                                • ENERGY STARreg Refrigerated Beverage Vending Machines
                                                • ENERGY STARreg Electric Steam Cooker
                                                • ENERGY STARreg Electric Combination Oven
                                                • ENERGY STARreg Commercial Convection Oven
                                                • ENERGY STARreg Commercial Fryers
                                                • ENERGY STARreg Commercial Hot Holding Cabinet
                                                  • Motors and Variable Frequency Drives
                                                    • Early Replacement Motors
                                                    • Variable Frequency Drives on HVAC Fan Applications
                                                    • Variable Frequency Drives on Pump Applications
                                                    • Variable Speed Control for Kitchen Exhaust Hoods
                                                    • Variable Speed Drives for Process or Other Equipment
                                                      • Domestic Hot Water
                                                        • Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater
                                                        • Heat Pump Water Heater
                                                        • Low Flow Pre-Rinse Spray Valve
                                                        • Domestic Hot Water Incentive Table
                                                          • Compressed Air Systems
                                                            • No-loss Condensate Drain
                                                            • Air-Entraining air nozzle
                                                            • Storage Tanks for LoadNo Load Screw Compressors
                                                            • Cycling Refrigerated Thermal Mass Dryer
                                                            • Variable Speed Air Compressor
                                                            • Compressed Air System Optimization
                                                            • Compressed Air Systems Incentive Table
                                                              • Data Centers
                                                                • Air Cooled Chiller
                                                                • Air Cooled Chiller without Condenser
                                                                • Computer Room Air Conditioner
                                                                • Computer Room Air Handler Variable Speed
                                                                  • Replacing constant speed CRAH with VSD CRAH
                                                                    • Water Cooled Centrifugal Chiller
                                                                    • Water Cooled Positive Displacement or Reciprocating Chiller
                                                                    • Uninterruptible Power Supply
                                                                    • Mainframe Refresh
                                                                    • Server Refresh
                                                                      • Whole Building Systems
                                                                        • Whole Building Systems Approach
                                                                        • How to Apply for Whole Building Systems Incentives
                                                                        • Customer Eligibility
                                                                        • Project Eligibility
                                                                        • Whole Building Systems Incentives Table
                                                                          • Custom Project Specifications
                                                                            • Instructions for Energy Savings Calculations for Custom Projects
                                                                            • Equipment Information Submittals
                                                                            • Energy Savings Calculations
                                                                            • Baseline for Custom Analysis
                                                                            • Baseline or Existing System Summary

- -LED Screw in Lamps Smart Bulbs

ESLED6 ENERGY STAR Screw-in LED Bulb (Decorative Globe Smart Bulb) 14 $5 lamp Lamp with globe shape such as type G

ESLED7 ENERGY STAR Screw-in LED Bulb (Decorative non-globe Smart Bulb) 14 $5 lamp Lamps with non-globe or candle-like shape such as

type B C CA F

ESLED8 ENERGY STAR Screw-in LED Bulb (DirectionalReflector Smart Bulb) 14 $5 lamp ANSI standard PAR lamps

ESLED9 ENERGY STAR Screw-in LED Bulb (Standard Smart Bulb) 14 $5 lamp Lamp such as A series

LED Tubes (replacing fluorescent)

TLED1 LED Replacement Lamps (Tubes) 2 5 $250 lamp Refer to Lighting Technical Specifications for requirements DLC Type A B and C are eligible bullType B linear (Interior driver) LEDs have the following installation requirements

bullExisting fluorescent ballast must be removed and fixturersquos incoming power wires are connected directly to the lamp sockets Strict adherence to installation instructions is critical when rewiring existing fixtures bullThe LED linear lamps must be delivered as part of a UL 1598C Classified Luminaire Retrofit Kit with instructions explaining the LED linear lamps must be installed on a luminaire that is already UL Listed bullThe retrofitted luminaire must be clearly identified using the label included with the Retrofit Kit indicating that the luminaire has been modified and can no longer operate the originally intended fluorescent lamp(s)

TLED2 LED Replacement Lamps (Tubes) 4 10 $4 lamp

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 16

LED Exterior Lighting

ELED1 ENERGY STAR Integral LED fixture Outdoor Recessed Downlight Retrofit Module 24 $10 module

ENERGY STAR or DLC Qualified fixtures ELED2 ENERGY STAR Integral LED fixture Outdoor Recessed

Downlight 24 $10 fixture

ELED3 LED Outdoor Flood Light Fixtures lt= 5000 LED lumens 50 $10 fixture Typically represents replacement of le175 W Metal Halide or equivalent Fixtures must be DLC qualified

ELED4 LED Outdoor Flood Light Fixtures gt 5000 LED lumens 70 $15 fixture Typically represents replacement of Metal Halide or equivalent greater than 175W Fixtures must be DLC qualified

ELED5 LED PoleArm Mounted Parking and Roadway Fixtures and Retrofit Kits lt= 5000 LED lumens 50 $25 fixture Typically represents replacement of le175 W Metal

Halide or equivalent Product must be DLC qualified

ELED6 LED PoleArm Mounted Parking and Roadway Fixtures and Retrofit Kits Outdoor gt 10000 LED lumens 150 $75 fixture

Typically represents replacement of Metal Halide or equivalent greater than 400W Product must be DLC

listed

ELED7 LED PoleArm Mounted Parking and Roadway Fixtures and Retrofit Kits Outdoor 5001 - 10000 LED lumens 70 $50 fixture

Typically represents replacement of Metal Halide or equivalent greater than 175W and less than 400W

Product must be DLC listed

ELED8 LED Wall Mount Fixtures and Retrofit Kits Outdoor lt= 5000 LED lumens 50 $25 fixture Typically represents replacement of le175 W Metal

Halide or equivalent Product must be DLC qualified

ELED9 LED Wall Mount Fixtures and Retrofit Kits Outdoor gt 5000 LED lumens 70 $50 fixture

Typically represents replacement of Metal Halide or equivalent greater than 175W Product must be DLC

qualified Permanent Fixture Removal

PFRA Indoor Permanent Fixture Removal combined with lighting retrofit na $010 watt removed Incentive only valid when units = ldquofixturerdquo in this table

Incentive is only offered when net lumens are reduced PFRB Outdoor Permanent Fixture Removal combined with lighting retrofit na $010 watt removed

Other LED Lighting LEDEXIT LED Exit Sign

na

$2 sign Replacing Incandescent or Fluorescent

SIGN1A Indoor LED Channel Signage $8 letter

Replacing Neon SIGN1B Outdoor LED Channel Signage $8 letter

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 17

Lighting Controls

CTL Unitary Sensor Controls

na

$1500 sensor

Passive infrared ultrasonic detectors are eligible Includes daylighting controls and all occupancy controls

Controls can be onoff stepped or continuous (dimming) Daylight sensor controls are required to be commissioned in order to ensure proper sensor calibration and energy savings

Minimum of 30 watts controlled per control

CLC Interior Central Lighting Controls $00175

square foot of area

under control

Automated central lighting control systems with override capabilities

This measure includes centrally-controlled time clocks wireless on off switches bi level switches computer based

controls pre-set scene selection dimmable ballasts and on-off dimmer switches for non-personal tuning

Floor plan must be submitted verifying square footage

DAYOCC Controls Combination - Daylighting and Occupancy Fixture Mounted $1500 sensor Minimum of 30 watts controlled per control

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 18

LED Traffic SignalsThis measure applies to the early replacement of existing incandescent traffic lights and pedestrian signals with LEDs New LED traffic signals must comply with ENERGY STAR requirements which can be found at httpswwwenergystargoviapartnersproduct_specseligibilitytraffic_eligpdf98bfshy1786

LED Traffic Signals Incentive Table

Round Traffic Signals 8 Red

Incentive per Signal

$15

8 Yellow 8 Green 12 Red

12 Yellow 12 Green

Turn Arrow Signals

8 Red

$13

8 Yellow 8 Green 12 Red

12 Yellow 12 Green

Pedestrian Signals

9 Pedestrian Only

$13

12 Hand Only 12 Pedestrian Only 12 Countdown Only

12 Pedestrian and Hand Overlay 16 Pedestrian and Hand Side by

Side 16 Pedestrian and Hand Overlay

16 Hand and Countdown Side-by-Side

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 19

Lighting Controls that Exceed Code Requirements

New Construction Lighting SpecificationsUnder the Lighting Power Density Approach the lighting power installed is compared with the lighting power allowed by code Incentives are available for systems where the installed lighting power is lower than the code-allowed power by at least 10 Savings are based on the Lighting Power Density (LPD) calculated on a watts per square foot basis Incentives will be paid only on the area of the building where the lighting installation is complete and is ready for occupancy If a portion of a building is not built-out such that the lighting in an area is not complete and ready for occupancy then that portion is not eligible for an incentive Baseline lighting power density is based on ASHRAE 901- 2007 Either the Space-by-Space or Building Area method may be used to calculate the LPD for the purposes of the incentive

Required Documentation bull Lighting Worksheet bull COMcheck Interior Lighting Report or equivalent analysis demonstrating space-byshy

space or building area calculations bull Reflected ceiling plans and electrical plan sheets showing lighting fixture layout bull Lighting fixture schedule sheet including fixture counts bull Fixture submittal or specification sheets showing model number and rated fixture wattage bull Architectural floor plans displaying floor area affected by proposed lighting installation

New Construction Lighting Incentives Table Lighting Wattssq ft

Improvement over of Code Incentive

gt= 10 and lt 20 $0035sq gt= 20 and lt 30 $007sq ft gt= 30 and lt 40 $0105sq

gt= 40 $021 sq ft

Incentives will be paid on a ($005kWh) custom basis Please contact Program Staff for eligibility of lighting controls for New Construction projects

Interior Occupancy Sensors Incentives are offered for occupancy-based controls in areas where they are not required by code Passive infrared ultrasonic detectors and fixture-integrated sensors or sensors with a combination sensor are eligible All sensors must be hard-wired and control interior lighting fixtures The incentive is per Watt controlled An inventory of the controlled fixtures and their wattage must be provided for each sensor with the Final Application

Daylight Dimming System Incentives are offered for daylight sensor controls in spaces with suitable available ambient light for at least part of the day Light may be through skylights clerestories windows or ldquolight tubesrdquo The controls can be onoff stepped or continuous dimming The onoff controller should turn off artificial lighting when the interior illuminance meets the desired indoor lighting level The stepped controller generally dims the artificial lighting 50 when the interior illuminance levels reach 50 of the desired lighting levels Continuous or dimming controllers dim artificial lighting proportionally to the available ambient light All types of daylight sensor controls are required to be commissioned in order to ensure proper sensor calibration and energy savings

Required Documentation bull Cut sheets or submittals of lighting control systems Reflected ceiling plans or schedule

showing which fixtures are controlled by lighting controls

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 20

New Construction Lighting Power Density CodeRequirements ndash Space by Space Method

Building Specific Space Types LPD (Wft2) Building Specific Space Types LPD (Wft2)

GymnasiumExercise Center AutomotivemdashServiceRepair 07

Playing Area 14 Manufacturing

Exercise Area 09 Low (lt25 ft Floor to Ceiling Height) 12

CourthousePolice StationPenitentiary High (gt25 ft Floor to Ceiling Height) 17

Courtroom 19 Detailed Manufacturing 21

Confinement Cells 09 Equipment Room 12

Judges Chambers 13 Control Room 05

Fire Stations HotelMotel Guest Rooms 11 Fire Station Engine Room 08 DormitorymdashLiving Quarters 11

Sleeping Quarters 03 Museum

Post Office-Sorting Area 12 General Exhibition 10 Convention Center-Exhibit Space 13 Restoration 17

Library BankOfficemdashBanking Activity Area 15 Card File and Cataloging 11 Religious Buildings

Stacks 17 Worship Pulpit Choir 24

Reading Area 12 Fellowship Hall 09

Hospital Retail

Emergency 27 Sales Area [For accent lighting see 93121(c)] 17

Recovery 08 Mall Concourse 17

Nurse Station 10 Sports Arena

ExamTreatment 15 Ring Sports Area 27

Pharmacy 12 Court Sports Area 23

Patient Room 07 Indoor Playing Field Area 14

Operating Room 22 Warehouse

Nursery 06 Fine Material Storage 14

Medical Supply 14 MediumBulky Material Storage 09

Physical Therapy 09 Parking GaragemdashGarage Area 02

Radiology 04 Transportation

LaundrymdashWashing 06 AirportmdashConcourse 06

AirTrainBusmdashBaggage Area 10

TerminalmdashTicket Counter 15

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 21

New Construction Lighting Power Density CodeRequirements ndash Building Area Method

Building Area Type 221 LPD (Wft2)

Automotive facility 09

Convention center 12

Courthouse 12

Dining bar loungeleisure 13

Dining cafeteriafast food 14

Dining family 16

Dormitory 1

Exercise center 1

Gymnasium 11

Health-care clinic 1

Hospital 12

Hotel 1

Library 13

Manufacturing facility 13

Motel 1

Motion picture theater 12

Building Area Type LPD (Wft2)

Multifamily 07

Museum 11

Office 1

Parking garage 03

Penitentiary 1

Performing arts theater 16

Policefire station 1

Post office 11

Religious building 13

Retail 15

Schooluniversity 12

Sports arena 11

Town hall 11

Transportation 1

Warehouse 08

Workshop 14

221 In cases where both a common space type and a building specific type are listed the building specific space type shall apply

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 22

Exterior New Construction LightingExterior New Construction savings over code lighting power density will be incentivized using custom lighting measure at $005kWh rate Participants must submit exterior lighting plans Submittals COMCHECK REPORT and lighting schedule for exterior lighting Savings are calculated from the LPD (Wsq ft) indicated below Additional information may be required based on the building exterior type and space description indicated below To contribute to incentive LEDs must satisfy program requirements for DLC Energy Star or equivalent listing

Required Documentation bull COMcheck Interior Lighting Report or equivalent analysis demonstrating space-by-space or

building area calculations bull Drawings showing lighting fixture layout bull Lighting fixture schedule sheet including fixture counts bull Fixture submittal or specification sheets showing model number and rated fixture wattage

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 23

Building Exterior Space Description LPD

Unco erect Pariki Ilg Area Parlurng ots arnd Drives 0 15 WfW

B i ing Grournds W al 1Yays lless Hlan 11] e 10 Wltirneru- 00

W a Nays 10 middot de or greater 112 W

Plaza a reas

Spec rest re areas

Stainh1ays 1ow 2

B i ing 8ntrames and Exits Ma efilbies m wr near foot of door width

Other doors 2o w 1r ear foot of door width

Ctmqpies and Overhimgs Free starndillg and a ched tmd 12s w m2 m bullerhangs

0 door sales Op en areas (ind udi Ilg ve id e sales 05 W lo )

street frontage far vehicle sales lots 21] W linear toot in addi middot on to open are-0bullmiddot lo~nce

B i ing facades 0 2 W tfl2 middot or eacil illumirnated N311 or surface

o r 5 0 Wllinear root fo r eac h m n inated N3l1 o r

surface length

Automated te lle r rnachmiddot es a lld 210 W per loca tion plus 91] night deposito liies W 1pernddiliorml A I middot per

1oca middot om

Eirltrances and gatehouse inspecliion 125 W ffl2 o middot uncovered slatiaBS a goo~ ed acir ies area

Load ing are-0s or law enforcement 0 5 W 2 of u rnco1bullered area fire ambu rnce and otiher emergency service ibullehmiddotctes

Drive-through w indOWs a taslrood 400 W per drive-Hlrough restaurants

Parking near 24 -h our retail 80111 W per main entry entmn ces

HVAC Equipment Air-Source Air Conditioners and Air-Source Heat Pumps New unitary air conditioning units or air source heat pumps that meet or exceed the qualifying cooling efficiency shown in the HVAC Incentives Worksheet are eligible for an incentive They can be either split systems or single package units The efficiency of split systems is based on an ARI reference number All packaged and split system cooling equipment must meet Air Conditioning and Refrigeration Institute (ARI) standards (210240 320 or 340360) be UL listed use a minimum ozone-depleting refrigerant (eg HCFC or HFC) All required efficiencies are based on the Consortium for Energy Efficiency (CEE) high-efficiency commercial air conditioning and heat pump specifications (wwwcee1org) A manufacturerrsquos specification sheet indicating the system efficiency must accompany the application Disposal of the existing unit

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 24

must comply with local codes and ordinances

Package Terminal Systems (Replacements) Package terminal air conditioners and packaged terminal heat pumps are through-the-wall self-contained units that are 2 tons (24000 Btuh) or less All EER values must be rated at 95degF outdoor dry-bulb temperature

Ductless Mini-Split Heat Pump lt54 Tons Incentives are offered for Ductless Mini-Split Heat Pump lt54 Tons with SEER rating greater than or equal to 120 and EER greater than or equal to 145 and HSPF greater than or equal to 90

Geothermal Heat Pump Geothermal equipment is a high-efficiency groundwater source water source or ground source heat pump system that meets or exceeds the energy efficiency requirements shown in the tables below These measures do not apply to heat pump systems coupled with non-heat pump systems such as chillers rooftop AC units boilers or cooling towers which must be filed as custom measures All HVAC applications other than comfort cooling and heating such as process cooling must also be applied for as custom measures

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 25

HVAC Heating Qualifying Incentive

Equipment Type and Cooling Capacity Cooling Qualifying Efficiency ($ per cooling Measure Code Efficiency

ton)

Air Cooled Air Conditioner

H01 lt 54 tons (lt 65000 Btuhr) 15 SEER NA $22

H02 lt 54 and lt 11 25 tons

125 IEER $22 (lt 65 000 Btuh and lt 135 000 Btuhr) NA

H03 lt11 25 and lt 20 tons

123 IEER NA $22 (lt 135000 Btuh and lt 240000 Btuhr)

H04 lt 20 and lt 6333 tons (~

11 1 IEER NA $22 240000 Btuh and lt 760000 Btuhr)

HOS ~ 6333 Ions (~ 760000 Btuhr) 103 IEER NA $22

Air Cooled Heat Pumps

H06 lt 54 tons (lt 65000 Btuhr) 143 SEER 87 HSPF $30

H07 lt 54 and lt 11 25 tons

123 IEER 3 3 COP $30 (lt 65000 Btuh and lt 135000 Btuhr)

HOS lt11 25 and lt 20 tons

1U IEER 3 2 COP $30 (lt 135000 Btuh and lt 240000 Btuhr)

H09 lt 2000 tons (240000 Btuhr) 105 IEER 3 2 COP $30

Packaged Terminal Systems (PTAC and PTHP) (PTHP only)

H10 lt 8000 Btuhr (lt066 tons) 11 8 EER 33 $17

H11 ~8000 and lt10500 Btuhr (~066 and lt 0875 tons) 11 4 EER 32 $17

H12 gt10500 Btuhr ( 875 tons) 107 EER 31 $17

H22 lt 54 tons (lt 65000 Btuhr) 121 EER 12 3 IEER NA $22

lt 54 and lt 11 25 tons 121 EER 12 3 IEER $22 H23

(lt 65000 Btuh and lt 135000 Btuhr) NA

H24 lt11 25 and lt 20 tons

120 EER 12 2 IEER $22 (lt 135000 Btuh and lt 240000 Btuhr) NA

H25 lt20 and lt 633 tons

119 EER 12 2 IEER $22 (lt 240000 Btuh and lt 760000 Btuhr) NA

H26 ~ 633 tons( lt760000 Btuhr) 110 EER 11 1 IEER NA

$22

HVAC Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 26

Other HVAC EquipmentHotel Guest Room Occupancy Sensor Incentives are offered for occupancy-based controls that control electric air conditioning air source heat pumps and or electric heating units for individual hotel rooms Systems with nonshyelectric heat are not eligible Sensors must be controlled by automatic occupancy detectors or a key-card system and the default setting for controlled units differ by at least 5 degrees (or shut the unit fan and heating or cooling off completely) from the operating set point during unshyoccupied periods The control system may also be tied into other electric loads such as lighting and plug loads to shut them off when occupancy is not sensed The incentive is per room Replacement or upgrades of existing occupancy-based controls are not eligible as a prescriptive incentive

Economizer Integrated Dual Enthalpy Economizer ControlsThis measure is targeted to non-residential establishments whose HVAC equipment is not equipped with a functional economizer

Circulation Fan High-Volume Low-SpeedFans must be greater than 16 feet in diameter and have variable speed control

ECM Circulation Fan This measure is targeted to non-residential customers whose air handling equipment currently uses a SP or PSC fan motor rather than an ECM This measure applies only to circulating fan motors of 1 HP or less Above 1 HP motors are governed by NEMA standards and would see little to no efficiency benefit by adding an ECM The targeted fan can supply heating or cooling only or both heating and cooling

ECM Circulation Pump This measure is targeted for replacement of a shaded pole or permanent split capacitor pump or motor with an electronically commutated pump or motor le75 HP

Retrocomissioning Cooling Systems Confined to chiller plant andor isolated packaged units For reservation must contain proposal with defined scope at equipment level that demonstrates energy savings For final approval required final commissioning report including raw data (TAB reports) demonstrating actual scope

This prescriptive measure can be used for facilities with maximum cooling demand less than 1687 tons Larger systems require the use of custom HVAC measure

Retrocomissioning Whole Building Covers all relevant major mechanical systems such as chiller plant air side systems compressed air andor process systems For reservation must contain proposal with defined scope at equipment level that demonstrates energy savings For final approval required final commissioning report including raw data (TAB reports) demonstrating actual scope

This prescriptive measure can be used for facilities less than 404858 square feet Larger facilities require the use of custom HVAC measure

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 27

Energy Management System For installing a web-based building automation system in existing buildings that currently have no digital automated HVAC controls or have outdated pneumatic control systems with inoperable time control functions Existing HVAC control systems must not have time-of-day scheduling Upgrading obsolete EMS HVAC system with inoperable time clock functions will be reviewed on a case-by-case basis for incentive eligibility This incentive cannot be combined with incentives for programmable thermostats or setback-setup controls Must include the controls strategy and a scaled floor-plan with controlled areas highlighted HVAC BAS systems must be new and include bull Central time clock control bull Web-based interface with PC-based controls and graphic bull Building performance Tracking bull Open-protocol architecture controls system shall consist of either LonTalk (ANSICEA 7091) or BACNet (ASHRAE ANSI 135) protocol being used between all controlled and controlling devices and every node on the network bull Minimum setback period must exceed 2200 hours per year bull A minimum setback space temperature of at least 10degF when heating and 5degF when cooling bull Ability to adjust schedules and settings remotely over the internet bull Report generation describing energy and operating trends

This prescriptive measure can be used for facilities with maximum cooling demand less than 456 tons Larger systems require the use of custom HVAC measure

Demand Controlled Ventilation New ventilation controls must use carbon dioxide levels to measure occupancy and modify the percentage of outside air based on occupancy levels Only buildings with space heating and cooling requirements are eligible Conditioned spaces must be kept between 65ordmF and 75ordmF during occupied operating hours Carbon dioxide sensors must be installed in conjunction with fully functioning motor operated outside air dampers Dual temperature air-side economizers with zone-level CO2 sensors for rooftop units are eligible

This prescriptive measure can be used for facilities with maximum cooling demand less than 2210 tons Larger systems require the use of custom HVAC measure

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 28

Other HVAC Measures- consult project manual for eligibility specifications HVAC

Measure Incentive Unit Quantity Incentive

Measure Code er Unit

H1 8 Hotel Guest Room Occupancy Sensor Room $20

H1 9 Economizer Integrated Dual Enthalpy Economizer Controls Ton $1 5

H20 Circulation Fan High-Volume Low-Speed Unit $30

H21 ECM Circulation Fan Fan $1 5

H27 ECM Circulation Pump Pump $50

H28 Retrocommissioning Cooling Systems

Ton $750

H29 Retrocommissioning Whole Buidling

Square Foot $010

H29 Energy Management System Ton $2500

H30 Demand Controlled Ventilation Ton $2500

Other HVAC Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 29

Unitary HVAC Chillers

Air-Cooled Chillers Water Cooled Positive Displacement Reciprocating Chillers and Water Cooled Centrifugal Chillers Chiller applications including existing multiple chiller configurations (including redundant or lsquostand-byrsquo chillers) existing chillers serving multiple load groups and chillers in industrial applications are defined as non-standard applications and must follow a site-specific custom protocol $005kWh) rate

Incentives are offered for chillers with an IPLV value (expressed in kW per ton) that is less than or equal to the qualifying efficiency shown in the table below The chiller efficiency rating must be based on ARI Standard 550590-2003 for IPLV conditions The chillers must meet ARI standards 550590-2003 be UL listed and use a minimum ozone-depleting refrigerant (eg HCFC or HFC) The ARI net capacity value should be used to determine the chiller tons A manufacturerrsquos specification sheet with the rated kWton-IPLV or COP-IPLV must accompany the application along with the four point performance data that is the basis for the IPLV The application must include a certification that the chiller is appropriately sized for site design load conditions

Chillers must satisfy efficiency requirements for both full load and IPLV efficiencies for either Path A or Path B The table shows the minimum efficiency ratings to qualify for the prescriptive incentive which must be consistent with the expected operating conditions of the efficient chiller For example if the efficient chiller satisfies Path A and generally performs at part load the appropriate baseline chiller efficiency is the IPLV value under Path A If the efficient chiller satisfies Path B and generally performs at full load the appropriate baseline chiller efficiency is the full load value under Path B Generally chillers operating above 70 percent load for a majority (50 or more) of operating hours should use Path A and chillers below 70 load for the majority of operating hours should use Path B

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 30

C3 lt 75 tons

C4 75 tons and lt 150 tons

cs ~ 150 tons and lt 300 tons C6 ~ 300 tons

Water Cooled Centrifugal Chillers C7 lt 300 tons CB ~ 300 tons and lt 600 tons

C9 ~ 600 tons

Path A

Qualifying Full Load Efficiency

Qualifying IPLV Efficiency

Path B

Qualifying Full Load Efficiency

Qualifying IPLV Efficiency

0780 kWton 0567 kWton 0800 kWton 0540 kWton

0775 kWton 0554 kWton 0790 kWton 0527 kWton

0680 kWton 0522 kWton 0718 kWton 0486 kWton 0620 kWton 0486 kWton 0639 kWton 0441 kWton

0634 kWton 0536 kWton 0639 kWton 0405 kWton 0576 kWton 0494 kWton 0600 kWton 0360 kWton

0570 kWton 0494 kWton 0590 kWton 0360 kWton

I

Incentive ($ton)

$17

$17

Unitary Chiller Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 31

Refrigeration

Anti-Sweat Heater Controls Incentives are offered for devices that sense the relative humidity in the air outside of the display case and cycles or turns off the glass door (if applicable) and frame anti-sweat heaters when the ambient dew point is below a preset set point Technologies that can turn off anti-sweat heaters based on sensing condensation (on the inner glass pane) also qualify Incentive is based on the number of doors

Evaporator Fan Controls This measure is for the installation of controls in medium temperature walk-in coolers The controller reduces airflow of the evaporator fans when there is no refrigerant flow The measure must control a minimum of 120 HP where fans operate continuously at full speed The measure also must reduce fan motor power by at least 75 during the off cycle This measure is not applicable if any of the following conditions apply 1) Compressor runs all the time with high duty cycle 2) Evaporator fan does not run at full speed all the time 3) Evaporator fan motor runs on poly-phase power 4) Evaporator fan motor is not shaded-pole or permanent split capacitor (PSC) 5) Evaporator fan does not use off-cycle or time-off defrost

Floating Head Pressure Controls Controls must vary head pressure to adjust condensing temperatures in relation to outdoor air temperature Must replace existing constant pressure or manually controlled systems to achieve reduced head pressure in order to maintain a minimum saturated condensing temperature of 70 degF or a 20 degF variance below design heat pressure during mild weather conditions Compressor size must be at least 5 HP

Automatic Door Closers for Walk-In Coolers and Freezers The auto-closer should be applied to the main insulated opaque door(s) of a walk-in cooler or freezer The auto-closer must be able to firmly close that door when it is within one inch of full closure This must be a newly installed automatic door closer replacements on previously installed door closers are not eligible for an incentive

EC Motor for Walk-inReach-in Refrigerated cases or Freezer cases Incentives are offered for replacement of an existing standard-efficiency shaded-pole or permanent split capacitor evaporator fan motor in refrigerated display cases or fan coil in walk-ins The replacement unit must be an Electronically Commutated Motor (ECM) This measure cannot be used in conjunction with the Evaporator Fan Controller measure

ENERGY STAR Solid Door Freezer and Glass Door Freezer and Refrigerators Incentives are offered for replacement of existing self-contained refrigerators and freezers with units that are ENERGY STARreg listed Only units with built-in refrigeration systems are qualified Units with remote refrigeration systems or units do not qualify Customers must provide proof that the appliance meets the CEE or ENERGY STAR efficiency specifications using ASHRAE Standard 72-2005 (38degF plusmn 2degF) Incentive is per unit

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 32

Refrigeration Suction Pipe Insulation 1 Must insulate bare refrigeration suction lines of 1 58 inches in diameter or less on existing equipment only 2 Cooler lines require frac34 inch of flexible closed-cell nitrite rubber or an equivalent insulation 3 Freezer lines require 1-inch of flexible closed-cell nitrite rubber or an equivalent insulation 4 Insulation exposed to the outdoors must be protected from the weather (ie jacketed with a medium-gauge aluminum jacket)

Night Cover 1 Must install a cover on an existing open refrigerated display case to decrease its cooling load during off hours 2 The equipment manufacturer must not object to the use of night covers for the existing display case model 3 This rebate is based on the linear footage of the installed 4 The cover must be applied for a period of at least six hours

Strip Curtain on Walk-In CoolerFreezer 1 New strip curtains or plastic swinging doors must be installed on doorways of refrigerated spaces (conditioned to less than 50deg F) 2 Rebate is based on the linear footage of the doorway that the strip curtains are being installed in 3 Opening between the strip curtain and bottom of doorway must be no larger than 1 inch 4 Strips must have an overlay greater than 1 inch

Evaporator Coil Defrost Control 1The current system must include an operating electric defrost system with a functional electroshymechanical time clock 2 Evaporator coil temperature and pressure must be monitored by controller in order to determine optimal defrost cycles 3 New intelligent control systems to control the defrost systems will typically replace timed- defrost controls

Variable Speed Refrigeration Compressor This measure VSD control for refrigeration systems and its eligibility targets applies to retrofit construction in the commercial and industrial building sectors it is most applicable to grocery stores or food processing applications with refrigeration systems This protocol is for a VSD control system replacing a slide valve control system

Add Doors to Open Refrigerated Cases The eligible retrofit equipment is either no sweat doors or doors with anti-sweat heaters If a lighting retrofit is included with the new doors it must consume the same amount of energy or less energy than the old lighting Upgrades to lighting or other system components should be processed separately Horizontal cases are not eligible and should be processed as custom

Door Gaskets PECO Smart Ideas For Your Business CampI Program Application Manual

Q1 2017 pg 33

This measure is applicable to commercial refrigeration and applies to the replacement of worn-out gaskets with new better-fitting gaskets Applicable gaskets include those located on the doors of walk-in andor reach-in coolers and freezers This protocol applies to the main doors of both low temperature (ldquofreezerrdquo ndash below 32 degF) and medium temperature (ldquocoolerrdquo ndash above 32 degF) walk-ins

Zero Energy Doors For this measure a no-heatlow-heat clear glass door must be installed on an upright display case It is limited to door heights of 57 inches or more Doors must have either heat reflective treated glass be gas filled or both This measure applies to low temperature cases onlymdashthose with a case temperature below 0degF Doors must have 3 or more panes Total door rail glass and frame heater amperage ( 120 volt) cannot exceed 039413 amps per door for low temperature display cases Rebate is based on the door width (not including case frame)

Air Cooled Refrigeration Condenser Approach temperature lt8F for low temperature loads lt13F for medium temperature loads

Oversized Condenser with VFD New standalone condenser must no more than 150 larger than load

Case Light Occupancy Controls Acceptable for freezer or refrigerated cases as well as open cases or cases with doors

LED Open Case Lighting For replacing open case T8 or T12 fluorescent fixtures with DLC listed LEDs on refrigerators coolers and freezers

LED Enclosed Case Lighting Refrigerated LED case lighting with or without motion sensors on enclosed refrigerated vertical displays The baseline equipment is assumed to be cases with uncontrolled T8 or T12 linear fluorescent lamps

LED Enclosed Case Lighting Freezer LED case lighting with or without motion sensors on enclosed freezer vertical displays The baseline equipment is assumed to be cases with uncontrolled T8 or T12 linear fluorescent lamps

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 34

Refrigeration Measures Ref Measure

Measure Incentive Unit IncentiveUnit Code R01 Anti-Sweat Heater Controls Door $30

R02 Evaporator Fan Controls Controller $50

R03 Floating-head Pressure Controls HP $20

R04 Automatic Door Closers fo r Walk-in Coolers Door $75

R05 Automatic Door Closers fo r Walk-in Freezers Door $75

R06 Evaporator Fan EC Motor fo r Reach- in Cases Motor $35

RO Evaporator Fan EC Motor fo r Walk-in Cases Motor $50

R08 ENERGY STARreg Glass Door Freezer lt15 Cu Ft Unit $100

R09 ENERGY STARreg Glass Door Freezer 15- 49 Cu Ft Unit $125

R10 ENERGY STARreg Glass Door Freezer ~ 50 Cu Ft Unit $145

R11 ENERGY STARreg Solid Door Freezer Unit $75

R12 ENERGY STARreg Glass Door Refrigerator lt50 Cu Ft Unit $30

R13 ENERGY STARreg Glass Door Refrigerator gt= 50 Cu Ft Unit $50

K14 t NtKGY ~ I AKreg ~Olld Uoor Ketngerator $ OU Cu t-t Unit $~0

R15 Suction Pipe Insulation Walk-in Coolers Linear Foot $050

R16 Suction Pipe Insulation Walk in Freezers Linear Foot $075

R17 Night Cover Linear Foot $800

R18 Strip Curtains on Walk-in Cooler Linear Foot $250

R19 Evaporator Coil Defrost Control Controller $7500

R20 Variable Speed Refrigeration Compressor Compressor $85

R21 Add Doors to Open Refrigerated Cases Door $55

R22 Door Gaskets Door $250

R23 Zero Energy Doors Door $50

R24 A ir Cooled Refrigeration Condenser Ton $10

R25 Oversized Condenser with VFD Ton $10

R26 Case Light Occupancy Controls Door $8

R27 LED Open Cose Lighting Cose $10

R28 LED Enclosed Case Lighting Refrigerated Door $30

R30 LED Enclosed Case Lighting Freezer Door $30

Refrigeration Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 35

Food Service Beverage and Snack Machine Controls Incentives are offered for refrigerated vending machines that contain non-perishable bottled and canned beverages Controller for both types of systems must include a passive infrared occupancy sensor to turn off fluorescent lights and other energized machine systems when the surrounding area is unoccupied for 15 minutes or longer For the refrigerated machines the control logic may include periodic power up at 2-hour intervals or longer to maintain product temperature and provide compressor protection

ENERGY STARreg Refrigerated Beverage Vending Machines Incentives are offered for ENERGY STARreg beverage vending machines Qualifying machines can be found at httpswwwenergystargovproductsothervending_machines

ENERGY STARreg Electric Steam Cooker This measure applies to the installation of electric ENERGY STAR steam cookers as either a new item or replacement for an existing unit Gas steam cookers are not eligible The steam cookers must meet minimum ENERGY STAR efficiency requirements A qualifying steam cooker must meet a minimum cooking efficiency of 50 percent and meet idle energy rates specified by pan capacity

ENERGY STARreg Electric Combination Oven This measure applies to electric ovens capable of handling single 12 x 20 x 25 pan per rack

ENERGY STARreg Commercial Convection Oven The oven must meet or exceed heavy load potato cooking energy efficiency of greater than 70 utilizing ASTM Standard F149 Applies only to electric ovens

ENERGY STARreg Commercial Fryers The commercial fryer must have a tested heavy load (French fry for large vats) cooking energy efficiency of greater than 80 utilizing American Society for Testing and Materials (ASTM) Standard F1361 for commercial fryers and ASTM Standard F2144 for large vat fryers Multiple vat configurations are paid per qualifying vat ENERGY STAR maintains a list of qualifying products and specifications at httpwwwenergystargov

ENERGY STARreg Commercial Hot Holding Cabinet Energy STAR rating electric

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 36

Food Service amp Other Measures FoodOther

Measure Incentive Unit Incentive

Measure Code Unit

F01 Beverage Machine Controls Unit $25

F02 Snack Machine Controls Unit $20

F03 ENERGY STARreg Refrigerated Beverage Vending Machir Unit $125

F04 ENERGY STARreg Commerc ial Steam Cooker Unit $200

F05 ENERGY STARreg Electric Combination Oven Unit $200

F06 ENERGY STARreg Commercial Electric Convection Oven Unit $150

F07 ENERGY STARreg Commerc ial Fryers Unit $100

F08 ENERGY STARregCommerc ial Hot Holding Cabinet Unit $200

Food Service Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 37

Motors and Variable Frequency DrivesEarly Replacement Motors For constant speed and uniformly loaded motors this measure applies to the replacement of old motors with new energy efficient motors of the same rated horsepower Old motors must be less than 15 years Replacements where the old motor and new motor have different horsepower ratings are considered custom measures Motors with variable speeds variable loading or industrial-specific applications are also considered custom measures

Motors Incentive Table Motors

Measure Code

HP Incentive per Motor

M01 15 - 10 $40 M02 11 - 50 $100 M03 51-100 $150 M04 gt100 $300

Only VFDs on unitary systems are eligible Non-unitary systems must be submitted as a custom measure Soft start motors are not eligible

Variable Frequency Drives on HVAC Fan Applications Incentives are offered for installing VFDs on existing HVAC fans that do not have pre-existing VFDs This measure applies to HVAC supply and return fans only All other fans including cooling tower fans must be submitted as custom measures Manually fixed speed settings on HVAC fans must be submitted via custom application The VFD must control motor speed automatically in response to pressure flow temperature or other variable signal The installation of a VSD must accompany the permanent removal or disabling of any throttling devices such as inlet vanes bypass dampers and throttling valves etc The incentive is offered per controlled HP

Variable Frequency Drives on Pump Applications Incentives are offered for installing VFDs on existing chilled water pumps and heating hot water pumps that do not have existing VFDs This measure applies to chilled water pumps and heating hot water pumps only All other pumps must be submitted as custom measures Manually fixed speed settings on pumps must be submitted via custom application The VFD must control motor speed automatically in response to pressure flow temperature or other variable signal The installation of a VSD must accompany the permanent removal or disabling of any throttling devices such as throttling valves The incentive is offered per controlled HP

Variable Speed Control for Kitchen Exhaust Hoods The measure consists of installing a new VSD in conjunction with a sensor control system that varies the exhaust rate of kitchen ventilation (exhaust andor makeup air fans) based on the heat and effluent output from the cooking appliances (ie the more heat and smokevapors generated the more ventilation needed) This involves installing a temperature sensor in the hood exhaust collar andor an optic sensor on the end of the hood that senses cooking conditions and allows the system to automatically vary the rate of exhaust to match requirements by adjusting the fan speed accordingly

Variable Speed Drives for Process or Other Equipment VFD must be used in conjunction with a process (non HVAC) application To qualify for this incentive the driven equipment must operate at least 2000 hours per year Redundant or back- up units do not qualify VFDs replacing existing VFDs do not qualify The VFD must control motor

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 38

speed automatically in response to pressure flow temperature or other variable signal VFDs installed as ldquosoft startrdquo without automatic manual closed loop speed control do not qualify The installation of a VFD must accompany the permanent removal or disabling of any throttling devices such as throttling valves The incentive is per controlled HP and only applies to controlled motors less than 50 HP

VSDVFD Incentives Table VFD

Measure Code

Measure Unit Incentive per Unit

Fan Application

V01 VFD on HVAC Fan HP $25 Pump Application

Variable Speed Control for Kitchen Exhaust Hoods

Variable Speed Drives for Process or Other Equipment

V02 VFD on Chilled Water Pumps HP $25 V03 VFD on Heating Hot Water Pumps HP $25

V04 Kitchen Exhaust Fan Retrofit Hood HP $500

V05 Process Motor lt 50 HP HP $50

Domestic Hot Water Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater This measure documents the energy savings attributed to converting from a standard electric water heater to an ENERGY STAR natural gaspropane-fired water heater or a standard oil-fired water heater with an Energy Factor of 0585

Heat Pump Water Heater This includes heat pump water heaters with energy factors meeting ENERGY STAR criteria The measure described here involves a direct retrofit of a resistive electric water heater with a heat pump water heater It does not cover systems where the heat pump is a pre-heater or is combined with other water heating sources More complicated installations can be treated as custom projects

Low Flow Pre-Rinse Spray Valve This measure applies to efficient low flow pre-rinse sprayers in grocery and food service applications The most likely areas of application are kitchens in restaurants and hotels Only premises with electric water heating may qualify for this incentive In addition the replacement pre-rinse spray nozzle must use less than 16 gallons per minute with a cleanability performance of 26 seconds per plate or less Low flow pre-rinse sprayers reduce hot water usage and save energy associated with water heating

Domestic Hot Water Incentive Table

Measure Code Measure Unit Retrofit Incentive per

Unit

W01 Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater Unit $100

W02 Heat Pump Water Heater Unit $100 W03 Low-Flow Pre-Rinse Spray Valve Valve $17

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 39

Compressed Air SystemsNo-loss Condensate Drain No-loss Condensate Drains are controlled by a sensor that monitors the level of condensate and only open when there is a need to drain condensate They close before compressed air is allowed to escape This measure is targeted to non-residential customers whose equipment is a timed drain that operates on a pre-set schedule Acceptable baseline conditions are compressed air systems with standard condensate drains operated by a solenoid and timer

Air-Entraining air nozzle This measure is targeted to non-residential customers whose compressed air equipment uses stationary air nozzles in a production application with an open copper tube of 18rdquo or 14rdquo orifice diameter Energy efficient conditions require replacement of an inefficient non-air entraining air nozzle with an energy efficient air-entraining air nozzle that use less than 15 CFM at 100 psi for industrial applications

Storage Tanks for LoadNo Load Screw Compressors This measure protocol applies to the installation of air receivers with pressureflow controls to loadno load compressors Loadno load compressors unload when there is low demand The process of unloading is done over a period of time to avoid foaming of the lubrication oil Using a storage tank with pressureflow control will buffer the air demands on the compressor Reducing the number of cycles in turn reduces the number of transition times from load to no load and saves energy The baseline equipment is a loadno load compressor with a 1 galcfm storage ratio or a modulating compressor with blowdown The high efficiency equipment is a loadno load compressor with a minimum storage ratio of 4 gallons of storage per cfm

Cycling Refrigerated Thermal Mass Dryer When air is compressed water vapor in the air condenses and collects in liquid form Some of this condensate collects in the air distribution system and can contaminate downstream components such as air tools with rust oil and pipe debris Refrigerated air dryers remove the water vapor by cooling the air to its dew point and separating the condensate Changes in production and seasonal variations in ambient air temperature lead to partial loading conditions on the dryer Standard air dryers use a hot gas bypass system that is inefficient at partial loads A Cycling Thermal Mass Dryer uses a thermal storage medium to store cooling capacity when the system is operated at partial loads allowing the dryer refrigerant compressor to cycle

This measure is targeted to non-residential customers whose equipment is a non-cycling refrigerated air dryer with a capacity of 600 cfm or below Acceptable baseline conditions are a non-cycling (eg continuous) air dryer with a capacity of 600 cfm or below The replacement of desiccant deliquescent heat-of-compression membrane or other types of dryers does not qualify under this measure

Variable Speed Air Compressor This type of compressor uses a special drive to control the speed (RPM) of the unit which in turn saves energy compared to a fixed speed equivalent

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 40

No-loss Condensate Drain Air-Entraining Air Nozzle Cycling Refrigerated Thermal Mass Dryer

Compressor Incentive per

Equipment Type Units Quantity Daily Operating Unit

Hours

CA04 Storage Tanks for LoadNo Load Screw

Compressor HP $10 Compressors

CA05 Variable Speed Air Compressor

Compressor HP $30

CA06 Compressed Air System Optimization

Compressor HP $50

Compressed Air System Optimization The submitted optimization measures must be identified in an Air System Audit or equivalent study to be eligible The measures must demonstrate energy savings as evaluated by a Program Engineer Additionally measures must also fall under one or more of the category below to be eligible

1) Install storage Receivers (new receivers only replacing existing storage receivers are ineligible)

2) Compressor control (must demonstrate improvement in partial load efficiency of the compress air system including reduceeliminate partially loaded units)

3) Dryer control 4) Source pressure reduction 5) Right-sizing distribution components such as piping filters regulators

connectors and hoses (routine maintenance replacements are ineligible) 6) Leakage detection and repair 7) Eliminate low-efficiency end-usages of compressed air 8) Heat recovery (most reduce electricity consumption of the replaced heat source)

Compressed Air Systems Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 41

lt65000 Btuh

~ 65000 Btuh and lt135000 Btuh

135000 Btuhand lt240000 Btuh

240000 Btuh and lt760000 Btuh

760000 Btuh

154

142

135

125

123

Chiller Capacity Path APath B efficiency (kWton )

lt 150 tons

~150 tons and lt300 tons

300 tons and lt400 tons

400 tons and lt600 tons

600 tons

lt75 tons

~75 tons and lt150 tons

~150 tons and lt300 tons

~300 tons and lt600 tons

600 tons

0610 FU0695 FL and 0550 IPLV0440 IPLV

0610 FU0635 FL and 0550 IPLV0400 IPLV

0560 FU0595 FL and 0520 IPLV0390 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

Path APath B efficiency (kWton )

0750 FU0780 FL and 0600 IPLV0500 IPLV

0720 FU0750 FL and 0560 IPLV0490 IPLV

0660 FU0680 FL and 0540 IPLV0440 IPLV

0610 FU0625 FL and 0520 IPLV0410 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

Data Centers Data Center incentives are available for facilities ranging in size from office server closets to large standalone facilities

Air Cooled Chiller Path APath B EER (BtuWh) lt150 tons 101 FL97 FL and 137 IPLV158 IPLV ge150 tons 101 FL97 FL and 140 IPLV161 IPLV

Air Cooled Chiller without Condenser Air-cooled chillers without condenser must be rated with matching condensers and comply with air-cooled chiller efficiency requirements

Computer Room Air Conditioner

Computer Room Air Handler Variable Speed Replacing constant speed CRAH with VSD CRAH

Water Cooled Centrifugal Chiller

Water Cooled Positive Displacement or Reciprocating Chiller

Uninterruptible Power Supply Must be Energy Star Certified UPS or have full load efficiency rating

ge948 for 20-100 kVA ge978for ge100 kVA

Mainframe Refresh The rated efficiency of the replacement Mainframes power supply must be at least 8 more

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 42

- Equipment Type Units IncentiveUnit

D1 Air Cooled Chiller Ton $4000 D2 Air Cooled Chiller W ithout Condenser Ton $2000 D3 Computer Room Air Conditioner Ton $3000 D4 Computer Room Air Handler Variable Speed Ton $1000 D5 Water Cooled Centrifugal Chiller Ton $3000 D6 Water Cooled Positive Displacement or Reciprocatin $3000 D7 Uninterruptible Power Supply 20-100 kVA $1000 D8 Uninterruptible Power Supply gt 100 kVA $1000 D9 Mainframe Refresh $2000

D10 Server Refresh $2000 D11 PC Power Managment System $600 D12 HVAC System Optimization $005 D1 3 HoUCold Aisle Containment kWh saved $005 D14 Server Virtualization kW reduction $40000 D1 5 Thin Clients Units $500

efficient compared to the existing Mainframes power supply The replacement Mainframe if Inactive must be decommissioned and removed from the Data Center

Server Refresh Replacement servers must be ENERGY STARreg certified Replacement servers power supply must be 5 more efficiency compared to the power supply of the replaced servers The replaced server must be decommissioned and removed from the data center

HVAC System Optimization Final system must have these features

-Implementation of free cooling by the addition of an economizer system -Conversion of constant speed CRACCRAH into variable speed operations using VFDs and additional control functionalities and -Elevation of exhaust air temperature

HotCold Aisle Containment Includes both Hot and Cold Aisles Installing new containment measures not replacing already existed aisle containment Plenum-only installations not eligible Must result in higher difference between the return air (hot aisle) and supply air (cold aisle) temperatures measured at rack intake and exhaust locations

Server Virtualization Minimum of consolidating 5 Servers virtualized into one Server The virtualized servers if inactive are removed from the Data Center

Thin Clients Must be ENERGY STAR certified thin clients Decommissioned clients are removed from the Data Center

Data Center Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 43

Whole Building Systems Whole Building Systems Approach

The Whole Building Systems approach is intended to encourage integrated energy efficient designs by providing enhanced incentives to the customer who addresses overall energy performance Owners of eligible and qualifying new construction and major renovation projects can receive Whole Building Systems incentives when energy modeling indicates the projectrsquos performance is over 10 better than the ASHRAE 901-2007 Savings from eligible electric end-uses in kilowatt hours define the amount of financial incentive Energy savings achieved through renewable energy sources are not counted toward project energy savings and are not included in the savings basis Incentive reservations obtained during the design phase of a project will be honored for up to 24 months

How to Apply for Whole Building Systems Incentives Before construction begins bull A Pre-notification Application must be submitted documenting the Owners intention to

seek Whole Building Systems incentives bull The Owner must confirm the goals and energy efficiency strategies being pursued by the

design team on the completed Pre-notification Worksheet (Checklist tab) and in the project Summary (Whole Building Performance Summary tab)

bull Submit executable building modeling software files bull Submit the Whole Building Performance Summary worksheet energy simulation model

inputs and outputs and supporting documentation bull Receive confirmation and eligibility notification from the PECO Smart Ideas team and

receive an incentive reservation bull The final incentive paid may differ from the reserved incentive amount The final

incentive will be calculated based on site-verified equipment installation and performance The Owners final application and complete documentation must be received within 6 months of equipment installation or certificate of occupancy whichever is later

bull An executable energy model and model output demonstrating compliance with the criteria of ASHRAE 901-2007 Appendix G will be required and the equipment data sheets LED lighting fixtures must be on the DLC or Energy STAR qualified products list (QPL) to be eligible LED fixtures not on the DLC or Energy STAR QPL has the option of submitting LM79 and LM80 test reports for evaluation against DLC and Energy STAR eligibility criteria

During the construction period bull Owner and design team continue to work closely with their chosen contractor to assure

energy efficiency measures are included and installed in the completed building

When the building is constructed and operational bull Complete the Owner final application Request an equipment verification site visit by the

PECO Smart Ideas team Equipment must be installed and fully operational o Program staff will schedule a site visit and utilize submitted documentation and

measurement tools to verify that the installation follows the submitted energy simulation model

bull When PECO confirms that there are no significant changes to the installed equipment payment of the reserved incentive will be made to the Owner within 6 weeks

bull If changes from the proposed design energy simulation are found the Owner and design team will be notified of the reduced incentive amount a period of 20 calendar days will

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 44

Improvement Incentive per Sq Ft

over Code

~11 to lt20 $0155

~20 to lt30 $0233

~30 to lt40 $0350

~40 to lt60 $0525

~60 $0700

be allowed for supplemental information to be provided if no additional information is received by PECO Smart Ideas team the reduced incentive payments will be made and sent to the Owner if additional clarification and information is available program staff will work diligently to resolve the discrepancies and arrive at a reasonable incentive adjustment with the customer

Payments made by PECO Smart Ideas are final

Customer Eligibility The Owner of the proposed new building project must be a customer of PECO and receive delivery of electric service from PECO to receive kilowatt-hour based incentives Please note that electricity supply can be provided by any vendor

Project Eligibility bull The project must be a new construction or major renovation Major renovations involving

the removal and redesign of at least two building systems (such as interior lighting and mechanical systems) may apply for Whole Building Systems incentives

bull To qualify for incentives projects must demonstrate energy efficiency enhancements that achieve at least 11 improvement in the proposed design versus the standard baseline

bull The Owner must submit a Pre-approval Application to the program at the stage where changes for increased energy efficiency are still feasible and construction has not been completed

bull Projects receiving Whole Building Systems incentives are not eligible to receive other incentives such as the prescriptive or custom program incentives for the same scope

bull Project components that are NOT eligible for consideration as a basis for PECO Smart Ideas include the following o Alternative fuel sources (eg use of gas or oil equipment in lieu of electric) Please note

that combined heat and power (CHP) systems will be incentivized for the electricity they produce

o Renewable energy sources (eg solar wind biomass) bull Ineligible savings include exterior lighting process receptacle miscellaneous loads and

other unregulated end-uses Custom incentives are available for new construction exterior lighting

Whole Building Systems Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 45

Custom Project Specifications Instructions for Energy Savings Calculations for Custom Projects Custom projects must involve measures that result in a reduction in electric energy use (kWh) Electricity savings may result from either efficiency improvements or fuel switching Custom Incentives are based on the first year kilowatt-hour savings Custom applications must be accompanied by detailed engineering calculations that document the annual total energy savings

The following serve as guidelines for the minimum required documentation

Equipment Information Submittals bull A list of the present and proposed equipment and components to be installed

including manufacturerrsquos catalogmodel number bull Manufacturerrsquos specification sheets showing capacities and performance for all major

components

Energy Savings Calculations Provide calculations documenting the predicted energy consumption of the existing (or baseline) and proposed system using appropriate analytical tools and clearly stated assumptions Calculations may be performed by ldquohandrdquo but spreadsheet analysis or more rigorous modeling is preferred All analysis should be provided in electronic format All assumptions such as operating hours existing and proposed equipment operational details must be presented Engineering algorithms and procedures from recognized technical organizations such as ASHRAE SMACNA ANSI etc must be used Use rated performance factors tested under accepted procedures specified by recognized rating agencies such as AHRI ANSI ASTM etc Provide an explanation when equipment performance rating conditions vary from standard conditions

In support of the calculations extensive documentation must be provided that provides the basis for the savings estimates The documentation must provide information on the equipment operating schedule daily and seasonal load profile and baseline AND energy efficient equipment performance at the operating loads Typical documentation for custom projects often includes bull Engineering or architectural drawings and ldquoequipment schedulerdquo sheets bull Component specification sheets that include part load efficiency or performance

factors bull Spreadsheet calculations or inputoutput files and results from system modeling or

other engineering analysis using accepted engineering algorithms and practices bull Log sheets trend logs from a building management system or other operating

documentation that are often necessary to document operating hours and equipment loading and used as a basis for the calculations (in some cases short term monitoring may be required to document the load profile)

bull Control sequence of operations that are necessary where controls play a part in the savings equation

Additional documentation other than that described in the application may be required for program participation Larger projects may also require pre- and post-project sub metering or monitoring of loads andor power input as part of another measurement and verification activity to demonstrate the actual energy savings that are realized

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 46

Baseline for Custom Analysis Where equipment is replaced prior to the end of its rated service life in order to achieve energy savings the existing equipment performance may be used as the baseline in the energy savings calculations Where equipment is replaced due to failure or for other reasons (such as obsolescence or a need for more capacity) the baseline performance used in the savings calculation should be either the minimum performance that would be required by code for that equipment type and application (where a code applies) or the performance of the equipment that would have been selected as the customers standard practice when a code does not apply

Baseline or Existing System Summary On custom worksheet on application form include make model number name plate information (such as operating voltage and rated full load amps) rated capacity quantities equipment condition and age facility operating hours equipment operating schedule and load curves If needed attach separate sheets

All decisions regarding incentives for custom projects are in the sole discretion of PECO

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 47

APPENDIX PROGRAM UPDATES SUMMARY (Q1 2017) Multifamily Nursing Home and Assisted Living retrofit customers need to apply for incentives through the PECO Smart Ideas Multi-Family Program administered by Franklin Energy For more information please contact Taylor Adler at tadlerfranklinenergycom or call 1-844-4BIZ-SAVE Multifamily Nursing Home and Assisted Living new construction customers can proceed with applying for incentives here

Revised Incentives

Data Centers

Measure Incentive Effective Immediately Previous Incentive

Air-cooled chiller for data centers $40ton $10ton Air-cooled chiller without condenser for data centers $20ton $10ton

Computer room air conditioner $30ton $7ton Water-cooled centrifugal chiller for data centers $30ton $5ton Water-cooled positive displacement or reciprocating chiller for data centers

$30ton $5ton

Uninterruptible power supply 20-100 kVA $10kVA $6kVA Uninterruptible power supply gt100 kVA $10kVA $1kVA Mainframe refresh $20kW installed $5kW installed Server refresh $20kW installed $4kW installed Server virtualization $400kW reduction $4kW reduction Thin clients $5units $4units

Lighting (Effective Immediately)

Measure Incentive Effective Immediately Specification Previous

Incentive Specification

New construction exterior LED outdoor flood light LED parking garage and canopy lighting LED polearm mounted parking and roadway lighting LED wall mount fixture

$005kWh (custom)

Lighting Power Density (LPD) Requirements Unchanged

$10-54 fixture

Lighting Power Density (LPD) (Wft2) by Space Type or Building Area

LED Replacement Lamps (Tubes) 2

$250lamp 5 Min Watts Reduced

$250lamp 6 Min Watts Reduced

LED Replacement Lamps (Tubes) 4

$400lamp 10 Min Watts Reduced

$400lamp 12 Min Watts Reduced

Permanent Fixture Removal $010Watt removed

Clarification of calculation to represent actual Wattage removed

$010Watt removed

Lighting (Effective 6117)

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 48

Measure Incentive Effective 6117 Specification Previous

Incentive Previous Specification

Interior LED high-bay fixtures andor retrofit kits if lt 20000 LED Lumens

$50fixture 150 Min Watts Reduced

$75fixture 150 Min Watts Reduced

Interior LED high-bay fixtures andor retrofit kits if gt 20000 LED Lumens

$75fixture 225 Min Watts Reduced

$75fixture 150 Min Watts Reduced

New Incentives

Compressed Air

Measure New Incentive Effective Immediately Variable speed air compressor $30compressor HP Compressed air system optimization $50compressor HP

HVAC

Measure New Incentive Effective Immediately ECM circulation pump $50pump Retro-commissioning cooling systems $750ton Retro-commissioning whole building $010square foot Energy management system $25ton Demand controlled ventilation $25ton Water-cooled air conditioner $22ton

Food Service

Measure New Incentive Effective Immediately Combination oven $200unit ENERGY STARreg commercial convection oven $150unit ENERGY STARreg commercial fryers $100unit ENERGY STARreg commercial hot holding cabinet $200unit

Refrigeration

Measure New Incentive Effective Immediately Air-cooled refrigeration condenser $10ton Oversized condenser with VFD $10ton Case light occupancy controls $750door

Lighting

Measure New Incentive Effective Immediately Interior central lighting controls $00175sq foot

Motors and Drives

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 49

-

Measure New Incentive Effective Immediately VFD for dust collection system motor $50HP

Application Clarifications and Revised Requirements

Clarification of LED Eligibility for New Construction or Retrofit Projects

LED Eligibility is determined by whether lighting products are listed in either the DesignLights Consortium (DLC) Qualified Products List of commercial-grade LED luminaires or the US Environmental Protection Agency database of ENERGY STAR certified products For products not yet listed contractors may submit LM79 and LM80 test reports PECO Smart Ideas engineers will review test reports to determine if the product in question meets performance specifications

Revised W 9 Requirement

W-9 forms EIN numbers are no longer required

Deletion of erroneous statement in New Construction Lighting

The following statement from previous Business Manual has been deleted ldquoThe minimum lighting power density used to calculate the incentive shall be no lower than 50 of the ASHRAE 901-2007 valuerdquo

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 50

  • Commercial amp Industrial Program Application Manual
    • Follow This Easy Process
      • Pre-Approval Application Checklist
      • Final Application Checklist
          • Terms and Conditions
            • Program Effective Dates
            • Program and Project Eligibility
            • Incentive Payment Limits
            • Application Review Process
            • Inspections andor PUCrsquos Statewide Program Evaluation
            • Requirements for Custom Project Electricity Savings Calculation
            • Tax Liability
            • No Endorsement
            • Warranties
            • Limitation of Liability
            • Assignment
            • Customerrsquos Certification
            • Termination
            • Acknowledgement
              • Retrofit Lighting Solutions
                • General Linear Fluorescent Lamp and Ballast Specification Requirements
                • LED Lamps and Fixtures
                • Minimum Watts Reduced
                • Linear LED (Tubes)
                • Permanent Fixture Removal
                  • LED Traffic Signals
                    • LED Traffic Signals Incentive Table
                      • New Construction Lighting Specifications
                        • New Construction Lighting Incentives Table
                          • New Construction Lighting Power Density Code
                              • Exterior New Construction Lighting
                              • HVAC Equipment
                                • Air-Source Air Conditioners and Air-Source Heat Pumps
                                • Package Terminal Systems (Replacements)
                                • Ductless Mini-Split Heat Pump lt54 Tons
                                • Geothermal Heat Pump
                                  • Other HVAC Equipment
                                    • Hotel Guest Room Occupancy Sensor
                                    • ECM Circulation Fan
                                    • ECM Circulation Pump
                                    • Retrocomissioning Cooling Systems
                                    • Retrocomissioning Whole Building
                                    • Energy Management System
                                    • Demand Controlled Ventilation
                                    • Other HVAC Incentives Table
                                      • Unitary HVAC Chillers
                                        • Air-Cooled Chillers Water Cooled Positive Displacement Reciprocating Chillers and Water Cooled Centrifugal Chillers
                                          • Refrigeration
                                            • Anti-Sweat Heater Controls
                                            • Evaporator Fan Controls
                                            • Floating Head Pressure Controls
                                            • Automatic Door Closers for Walk-In Coolers and Freezers
                                            • EC Motor for Walk-inReach-in Refrigerated cases or Freezer cases
                                            • ENERGY STAR Solid Door Freezer and Glass Door Freezer and Refrigerators
                                            • Refrigeration Suction Pipe Insulation
                                            • Night Cover
                                            • Strip Curtain on Walk-In CoolerFreezer
                                            • Evaporator Coil Defrost Control
                                            • Variable Speed Refrigeration Compressor
                                            • Add Doors to Open Refrigerated Cases
                                            • Door Gaskets
                                            • Zero Energy Doors
                                            • Air Cooled Refrigeration Condenser
                                            • Oversized Condenser with VFD
                                            • Case Light Occupancy Controls
                                            • LED Open Case Lighting
                                            • LED Enclosed Case Lighting Refrigerated
                                            • LED Enclosed Case Lighting Freezer
                                              • Food Service
                                                • Beverage and Snack Machine Controls
                                                • ENERGY STARreg Refrigerated Beverage Vending Machines
                                                • ENERGY STARreg Electric Steam Cooker
                                                • ENERGY STARreg Electric Combination Oven
                                                • ENERGY STARreg Commercial Convection Oven
                                                • ENERGY STARreg Commercial Fryers
                                                • ENERGY STARreg Commercial Hot Holding Cabinet
                                                  • Motors and Variable Frequency Drives
                                                    • Early Replacement Motors
                                                    • Variable Frequency Drives on HVAC Fan Applications
                                                    • Variable Frequency Drives on Pump Applications
                                                    • Variable Speed Control for Kitchen Exhaust Hoods
                                                    • Variable Speed Drives for Process or Other Equipment
                                                      • Domestic Hot Water
                                                        • Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater
                                                        • Heat Pump Water Heater
                                                        • Low Flow Pre-Rinse Spray Valve
                                                        • Domestic Hot Water Incentive Table
                                                          • Compressed Air Systems
                                                            • No-loss Condensate Drain
                                                            • Air-Entraining air nozzle
                                                            • Storage Tanks for LoadNo Load Screw Compressors
                                                            • Cycling Refrigerated Thermal Mass Dryer
                                                            • Variable Speed Air Compressor
                                                            • Compressed Air System Optimization
                                                            • Compressed Air Systems Incentive Table
                                                              • Data Centers
                                                                • Air Cooled Chiller
                                                                • Air Cooled Chiller without Condenser
                                                                • Computer Room Air Conditioner
                                                                • Computer Room Air Handler Variable Speed
                                                                  • Replacing constant speed CRAH with VSD CRAH
                                                                    • Water Cooled Centrifugal Chiller
                                                                    • Water Cooled Positive Displacement or Reciprocating Chiller
                                                                    • Uninterruptible Power Supply
                                                                    • Mainframe Refresh
                                                                    • Server Refresh
                                                                      • Whole Building Systems
                                                                        • Whole Building Systems Approach
                                                                        • How to Apply for Whole Building Systems Incentives
                                                                        • Customer Eligibility
                                                                        • Project Eligibility
                                                                        • Whole Building Systems Incentives Table
                                                                          • Custom Project Specifications
                                                                            • Instructions for Energy Savings Calculations for Custom Projects
                                                                            • Equipment Information Submittals
                                                                            • Energy Savings Calculations
                                                                            • Baseline for Custom Analysis
                                                                            • Baseline or Existing System Summary

LED Exterior Lighting

ELED1 ENERGY STAR Integral LED fixture Outdoor Recessed Downlight Retrofit Module 24 $10 module

ENERGY STAR or DLC Qualified fixtures ELED2 ENERGY STAR Integral LED fixture Outdoor Recessed

Downlight 24 $10 fixture

ELED3 LED Outdoor Flood Light Fixtures lt= 5000 LED lumens 50 $10 fixture Typically represents replacement of le175 W Metal Halide or equivalent Fixtures must be DLC qualified

ELED4 LED Outdoor Flood Light Fixtures gt 5000 LED lumens 70 $15 fixture Typically represents replacement of Metal Halide or equivalent greater than 175W Fixtures must be DLC qualified

ELED5 LED PoleArm Mounted Parking and Roadway Fixtures and Retrofit Kits lt= 5000 LED lumens 50 $25 fixture Typically represents replacement of le175 W Metal

Halide or equivalent Product must be DLC qualified

ELED6 LED PoleArm Mounted Parking and Roadway Fixtures and Retrofit Kits Outdoor gt 10000 LED lumens 150 $75 fixture

Typically represents replacement of Metal Halide or equivalent greater than 400W Product must be DLC

listed

ELED7 LED PoleArm Mounted Parking and Roadway Fixtures and Retrofit Kits Outdoor 5001 - 10000 LED lumens 70 $50 fixture

Typically represents replacement of Metal Halide or equivalent greater than 175W and less than 400W

Product must be DLC listed

ELED8 LED Wall Mount Fixtures and Retrofit Kits Outdoor lt= 5000 LED lumens 50 $25 fixture Typically represents replacement of le175 W Metal

Halide or equivalent Product must be DLC qualified

ELED9 LED Wall Mount Fixtures and Retrofit Kits Outdoor gt 5000 LED lumens 70 $50 fixture

Typically represents replacement of Metal Halide or equivalent greater than 175W Product must be DLC

qualified Permanent Fixture Removal

PFRA Indoor Permanent Fixture Removal combined with lighting retrofit na $010 watt removed Incentive only valid when units = ldquofixturerdquo in this table

Incentive is only offered when net lumens are reduced PFRB Outdoor Permanent Fixture Removal combined with lighting retrofit na $010 watt removed

Other LED Lighting LEDEXIT LED Exit Sign

na

$2 sign Replacing Incandescent or Fluorescent

SIGN1A Indoor LED Channel Signage $8 letter

Replacing Neon SIGN1B Outdoor LED Channel Signage $8 letter

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 17

Lighting Controls

CTL Unitary Sensor Controls

na

$1500 sensor

Passive infrared ultrasonic detectors are eligible Includes daylighting controls and all occupancy controls

Controls can be onoff stepped or continuous (dimming) Daylight sensor controls are required to be commissioned in order to ensure proper sensor calibration and energy savings

Minimum of 30 watts controlled per control

CLC Interior Central Lighting Controls $00175

square foot of area

under control

Automated central lighting control systems with override capabilities

This measure includes centrally-controlled time clocks wireless on off switches bi level switches computer based

controls pre-set scene selection dimmable ballasts and on-off dimmer switches for non-personal tuning

Floor plan must be submitted verifying square footage

DAYOCC Controls Combination - Daylighting and Occupancy Fixture Mounted $1500 sensor Minimum of 30 watts controlled per control

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 18

LED Traffic SignalsThis measure applies to the early replacement of existing incandescent traffic lights and pedestrian signals with LEDs New LED traffic signals must comply with ENERGY STAR requirements which can be found at httpswwwenergystargoviapartnersproduct_specseligibilitytraffic_eligpdf98bfshy1786

LED Traffic Signals Incentive Table

Round Traffic Signals 8 Red

Incentive per Signal

$15

8 Yellow 8 Green 12 Red

12 Yellow 12 Green

Turn Arrow Signals

8 Red

$13

8 Yellow 8 Green 12 Red

12 Yellow 12 Green

Pedestrian Signals

9 Pedestrian Only

$13

12 Hand Only 12 Pedestrian Only 12 Countdown Only

12 Pedestrian and Hand Overlay 16 Pedestrian and Hand Side by

Side 16 Pedestrian and Hand Overlay

16 Hand and Countdown Side-by-Side

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 19

Lighting Controls that Exceed Code Requirements

New Construction Lighting SpecificationsUnder the Lighting Power Density Approach the lighting power installed is compared with the lighting power allowed by code Incentives are available for systems where the installed lighting power is lower than the code-allowed power by at least 10 Savings are based on the Lighting Power Density (LPD) calculated on a watts per square foot basis Incentives will be paid only on the area of the building where the lighting installation is complete and is ready for occupancy If a portion of a building is not built-out such that the lighting in an area is not complete and ready for occupancy then that portion is not eligible for an incentive Baseline lighting power density is based on ASHRAE 901- 2007 Either the Space-by-Space or Building Area method may be used to calculate the LPD for the purposes of the incentive

Required Documentation bull Lighting Worksheet bull COMcheck Interior Lighting Report or equivalent analysis demonstrating space-byshy

space or building area calculations bull Reflected ceiling plans and electrical plan sheets showing lighting fixture layout bull Lighting fixture schedule sheet including fixture counts bull Fixture submittal or specification sheets showing model number and rated fixture wattage bull Architectural floor plans displaying floor area affected by proposed lighting installation

New Construction Lighting Incentives Table Lighting Wattssq ft

Improvement over of Code Incentive

gt= 10 and lt 20 $0035sq gt= 20 and lt 30 $007sq ft gt= 30 and lt 40 $0105sq

gt= 40 $021 sq ft

Incentives will be paid on a ($005kWh) custom basis Please contact Program Staff for eligibility of lighting controls for New Construction projects

Interior Occupancy Sensors Incentives are offered for occupancy-based controls in areas where they are not required by code Passive infrared ultrasonic detectors and fixture-integrated sensors or sensors with a combination sensor are eligible All sensors must be hard-wired and control interior lighting fixtures The incentive is per Watt controlled An inventory of the controlled fixtures and their wattage must be provided for each sensor with the Final Application

Daylight Dimming System Incentives are offered for daylight sensor controls in spaces with suitable available ambient light for at least part of the day Light may be through skylights clerestories windows or ldquolight tubesrdquo The controls can be onoff stepped or continuous dimming The onoff controller should turn off artificial lighting when the interior illuminance meets the desired indoor lighting level The stepped controller generally dims the artificial lighting 50 when the interior illuminance levels reach 50 of the desired lighting levels Continuous or dimming controllers dim artificial lighting proportionally to the available ambient light All types of daylight sensor controls are required to be commissioned in order to ensure proper sensor calibration and energy savings

Required Documentation bull Cut sheets or submittals of lighting control systems Reflected ceiling plans or schedule

showing which fixtures are controlled by lighting controls

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 20

New Construction Lighting Power Density CodeRequirements ndash Space by Space Method

Building Specific Space Types LPD (Wft2) Building Specific Space Types LPD (Wft2)

GymnasiumExercise Center AutomotivemdashServiceRepair 07

Playing Area 14 Manufacturing

Exercise Area 09 Low (lt25 ft Floor to Ceiling Height) 12

CourthousePolice StationPenitentiary High (gt25 ft Floor to Ceiling Height) 17

Courtroom 19 Detailed Manufacturing 21

Confinement Cells 09 Equipment Room 12

Judges Chambers 13 Control Room 05

Fire Stations HotelMotel Guest Rooms 11 Fire Station Engine Room 08 DormitorymdashLiving Quarters 11

Sleeping Quarters 03 Museum

Post Office-Sorting Area 12 General Exhibition 10 Convention Center-Exhibit Space 13 Restoration 17

Library BankOfficemdashBanking Activity Area 15 Card File and Cataloging 11 Religious Buildings

Stacks 17 Worship Pulpit Choir 24

Reading Area 12 Fellowship Hall 09

Hospital Retail

Emergency 27 Sales Area [For accent lighting see 93121(c)] 17

Recovery 08 Mall Concourse 17

Nurse Station 10 Sports Arena

ExamTreatment 15 Ring Sports Area 27

Pharmacy 12 Court Sports Area 23

Patient Room 07 Indoor Playing Field Area 14

Operating Room 22 Warehouse

Nursery 06 Fine Material Storage 14

Medical Supply 14 MediumBulky Material Storage 09

Physical Therapy 09 Parking GaragemdashGarage Area 02

Radiology 04 Transportation

LaundrymdashWashing 06 AirportmdashConcourse 06

AirTrainBusmdashBaggage Area 10

TerminalmdashTicket Counter 15

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 21

New Construction Lighting Power Density CodeRequirements ndash Building Area Method

Building Area Type 221 LPD (Wft2)

Automotive facility 09

Convention center 12

Courthouse 12

Dining bar loungeleisure 13

Dining cafeteriafast food 14

Dining family 16

Dormitory 1

Exercise center 1

Gymnasium 11

Health-care clinic 1

Hospital 12

Hotel 1

Library 13

Manufacturing facility 13

Motel 1

Motion picture theater 12

Building Area Type LPD (Wft2)

Multifamily 07

Museum 11

Office 1

Parking garage 03

Penitentiary 1

Performing arts theater 16

Policefire station 1

Post office 11

Religious building 13

Retail 15

Schooluniversity 12

Sports arena 11

Town hall 11

Transportation 1

Warehouse 08

Workshop 14

221 In cases where both a common space type and a building specific type are listed the building specific space type shall apply

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 22

Exterior New Construction LightingExterior New Construction savings over code lighting power density will be incentivized using custom lighting measure at $005kWh rate Participants must submit exterior lighting plans Submittals COMCHECK REPORT and lighting schedule for exterior lighting Savings are calculated from the LPD (Wsq ft) indicated below Additional information may be required based on the building exterior type and space description indicated below To contribute to incentive LEDs must satisfy program requirements for DLC Energy Star or equivalent listing

Required Documentation bull COMcheck Interior Lighting Report or equivalent analysis demonstrating space-by-space or

building area calculations bull Drawings showing lighting fixture layout bull Lighting fixture schedule sheet including fixture counts bull Fixture submittal or specification sheets showing model number and rated fixture wattage

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 23

Building Exterior Space Description LPD

Unco erect Pariki Ilg Area Parlurng ots arnd Drives 0 15 WfW

B i ing Grournds W al 1Yays lless Hlan 11] e 10 Wltirneru- 00

W a Nays 10 middot de or greater 112 W

Plaza a reas

Spec rest re areas

Stainh1ays 1ow 2

B i ing 8ntrames and Exits Ma efilbies m wr near foot of door width

Other doors 2o w 1r ear foot of door width

Ctmqpies and Overhimgs Free starndillg and a ched tmd 12s w m2 m bullerhangs

0 door sales Op en areas (ind udi Ilg ve id e sales 05 W lo )

street frontage far vehicle sales lots 21] W linear toot in addi middot on to open are-0bullmiddot lo~nce

B i ing facades 0 2 W tfl2 middot or eacil illumirnated N311 or surface

o r 5 0 Wllinear root fo r eac h m n inated N3l1 o r

surface length

Automated te lle r rnachmiddot es a lld 210 W per loca tion plus 91] night deposito liies W 1pernddiliorml A I middot per

1oca middot om

Eirltrances and gatehouse inspecliion 125 W ffl2 o middot uncovered slatiaBS a goo~ ed acir ies area

Load ing are-0s or law enforcement 0 5 W 2 of u rnco1bullered area fire ambu rnce and otiher emergency service ibullehmiddotctes

Drive-through w indOWs a taslrood 400 W per drive-Hlrough restaurants

Parking near 24 -h our retail 80111 W per main entry entmn ces

HVAC Equipment Air-Source Air Conditioners and Air-Source Heat Pumps New unitary air conditioning units or air source heat pumps that meet or exceed the qualifying cooling efficiency shown in the HVAC Incentives Worksheet are eligible for an incentive They can be either split systems or single package units The efficiency of split systems is based on an ARI reference number All packaged and split system cooling equipment must meet Air Conditioning and Refrigeration Institute (ARI) standards (210240 320 or 340360) be UL listed use a minimum ozone-depleting refrigerant (eg HCFC or HFC) All required efficiencies are based on the Consortium for Energy Efficiency (CEE) high-efficiency commercial air conditioning and heat pump specifications (wwwcee1org) A manufacturerrsquos specification sheet indicating the system efficiency must accompany the application Disposal of the existing unit

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 24

must comply with local codes and ordinances

Package Terminal Systems (Replacements) Package terminal air conditioners and packaged terminal heat pumps are through-the-wall self-contained units that are 2 tons (24000 Btuh) or less All EER values must be rated at 95degF outdoor dry-bulb temperature

Ductless Mini-Split Heat Pump lt54 Tons Incentives are offered for Ductless Mini-Split Heat Pump lt54 Tons with SEER rating greater than or equal to 120 and EER greater than or equal to 145 and HSPF greater than or equal to 90

Geothermal Heat Pump Geothermal equipment is a high-efficiency groundwater source water source or ground source heat pump system that meets or exceeds the energy efficiency requirements shown in the tables below These measures do not apply to heat pump systems coupled with non-heat pump systems such as chillers rooftop AC units boilers or cooling towers which must be filed as custom measures All HVAC applications other than comfort cooling and heating such as process cooling must also be applied for as custom measures

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 25

HVAC Heating Qualifying Incentive

Equipment Type and Cooling Capacity Cooling Qualifying Efficiency ($ per cooling Measure Code Efficiency

ton)

Air Cooled Air Conditioner

H01 lt 54 tons (lt 65000 Btuhr) 15 SEER NA $22

H02 lt 54 and lt 11 25 tons

125 IEER $22 (lt 65 000 Btuh and lt 135 000 Btuhr) NA

H03 lt11 25 and lt 20 tons

123 IEER NA $22 (lt 135000 Btuh and lt 240000 Btuhr)

H04 lt 20 and lt 6333 tons (~

11 1 IEER NA $22 240000 Btuh and lt 760000 Btuhr)

HOS ~ 6333 Ions (~ 760000 Btuhr) 103 IEER NA $22

Air Cooled Heat Pumps

H06 lt 54 tons (lt 65000 Btuhr) 143 SEER 87 HSPF $30

H07 lt 54 and lt 11 25 tons

123 IEER 3 3 COP $30 (lt 65000 Btuh and lt 135000 Btuhr)

HOS lt11 25 and lt 20 tons

1U IEER 3 2 COP $30 (lt 135000 Btuh and lt 240000 Btuhr)

H09 lt 2000 tons (240000 Btuhr) 105 IEER 3 2 COP $30

Packaged Terminal Systems (PTAC and PTHP) (PTHP only)

H10 lt 8000 Btuhr (lt066 tons) 11 8 EER 33 $17

H11 ~8000 and lt10500 Btuhr (~066 and lt 0875 tons) 11 4 EER 32 $17

H12 gt10500 Btuhr ( 875 tons) 107 EER 31 $17

H22 lt 54 tons (lt 65000 Btuhr) 121 EER 12 3 IEER NA $22

lt 54 and lt 11 25 tons 121 EER 12 3 IEER $22 H23

(lt 65000 Btuh and lt 135000 Btuhr) NA

H24 lt11 25 and lt 20 tons

120 EER 12 2 IEER $22 (lt 135000 Btuh and lt 240000 Btuhr) NA

H25 lt20 and lt 633 tons

119 EER 12 2 IEER $22 (lt 240000 Btuh and lt 760000 Btuhr) NA

H26 ~ 633 tons( lt760000 Btuhr) 110 EER 11 1 IEER NA

$22

HVAC Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 26

Other HVAC EquipmentHotel Guest Room Occupancy Sensor Incentives are offered for occupancy-based controls that control electric air conditioning air source heat pumps and or electric heating units for individual hotel rooms Systems with nonshyelectric heat are not eligible Sensors must be controlled by automatic occupancy detectors or a key-card system and the default setting for controlled units differ by at least 5 degrees (or shut the unit fan and heating or cooling off completely) from the operating set point during unshyoccupied periods The control system may also be tied into other electric loads such as lighting and plug loads to shut them off when occupancy is not sensed The incentive is per room Replacement or upgrades of existing occupancy-based controls are not eligible as a prescriptive incentive

Economizer Integrated Dual Enthalpy Economizer ControlsThis measure is targeted to non-residential establishments whose HVAC equipment is not equipped with a functional economizer

Circulation Fan High-Volume Low-SpeedFans must be greater than 16 feet in diameter and have variable speed control

ECM Circulation Fan This measure is targeted to non-residential customers whose air handling equipment currently uses a SP or PSC fan motor rather than an ECM This measure applies only to circulating fan motors of 1 HP or less Above 1 HP motors are governed by NEMA standards and would see little to no efficiency benefit by adding an ECM The targeted fan can supply heating or cooling only or both heating and cooling

ECM Circulation Pump This measure is targeted for replacement of a shaded pole or permanent split capacitor pump or motor with an electronically commutated pump or motor le75 HP

Retrocomissioning Cooling Systems Confined to chiller plant andor isolated packaged units For reservation must contain proposal with defined scope at equipment level that demonstrates energy savings For final approval required final commissioning report including raw data (TAB reports) demonstrating actual scope

This prescriptive measure can be used for facilities with maximum cooling demand less than 1687 tons Larger systems require the use of custom HVAC measure

Retrocomissioning Whole Building Covers all relevant major mechanical systems such as chiller plant air side systems compressed air andor process systems For reservation must contain proposal with defined scope at equipment level that demonstrates energy savings For final approval required final commissioning report including raw data (TAB reports) demonstrating actual scope

This prescriptive measure can be used for facilities less than 404858 square feet Larger facilities require the use of custom HVAC measure

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 27

Energy Management System For installing a web-based building automation system in existing buildings that currently have no digital automated HVAC controls or have outdated pneumatic control systems with inoperable time control functions Existing HVAC control systems must not have time-of-day scheduling Upgrading obsolete EMS HVAC system with inoperable time clock functions will be reviewed on a case-by-case basis for incentive eligibility This incentive cannot be combined with incentives for programmable thermostats or setback-setup controls Must include the controls strategy and a scaled floor-plan with controlled areas highlighted HVAC BAS systems must be new and include bull Central time clock control bull Web-based interface with PC-based controls and graphic bull Building performance Tracking bull Open-protocol architecture controls system shall consist of either LonTalk (ANSICEA 7091) or BACNet (ASHRAE ANSI 135) protocol being used between all controlled and controlling devices and every node on the network bull Minimum setback period must exceed 2200 hours per year bull A minimum setback space temperature of at least 10degF when heating and 5degF when cooling bull Ability to adjust schedules and settings remotely over the internet bull Report generation describing energy and operating trends

This prescriptive measure can be used for facilities with maximum cooling demand less than 456 tons Larger systems require the use of custom HVAC measure

Demand Controlled Ventilation New ventilation controls must use carbon dioxide levels to measure occupancy and modify the percentage of outside air based on occupancy levels Only buildings with space heating and cooling requirements are eligible Conditioned spaces must be kept between 65ordmF and 75ordmF during occupied operating hours Carbon dioxide sensors must be installed in conjunction with fully functioning motor operated outside air dampers Dual temperature air-side economizers with zone-level CO2 sensors for rooftop units are eligible

This prescriptive measure can be used for facilities with maximum cooling demand less than 2210 tons Larger systems require the use of custom HVAC measure

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 28

Other HVAC Measures- consult project manual for eligibility specifications HVAC

Measure Incentive Unit Quantity Incentive

Measure Code er Unit

H1 8 Hotel Guest Room Occupancy Sensor Room $20

H1 9 Economizer Integrated Dual Enthalpy Economizer Controls Ton $1 5

H20 Circulation Fan High-Volume Low-Speed Unit $30

H21 ECM Circulation Fan Fan $1 5

H27 ECM Circulation Pump Pump $50

H28 Retrocommissioning Cooling Systems

Ton $750

H29 Retrocommissioning Whole Buidling

Square Foot $010

H29 Energy Management System Ton $2500

H30 Demand Controlled Ventilation Ton $2500

Other HVAC Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 29

Unitary HVAC Chillers

Air-Cooled Chillers Water Cooled Positive Displacement Reciprocating Chillers and Water Cooled Centrifugal Chillers Chiller applications including existing multiple chiller configurations (including redundant or lsquostand-byrsquo chillers) existing chillers serving multiple load groups and chillers in industrial applications are defined as non-standard applications and must follow a site-specific custom protocol $005kWh) rate

Incentives are offered for chillers with an IPLV value (expressed in kW per ton) that is less than or equal to the qualifying efficiency shown in the table below The chiller efficiency rating must be based on ARI Standard 550590-2003 for IPLV conditions The chillers must meet ARI standards 550590-2003 be UL listed and use a minimum ozone-depleting refrigerant (eg HCFC or HFC) The ARI net capacity value should be used to determine the chiller tons A manufacturerrsquos specification sheet with the rated kWton-IPLV or COP-IPLV must accompany the application along with the four point performance data that is the basis for the IPLV The application must include a certification that the chiller is appropriately sized for site design load conditions

Chillers must satisfy efficiency requirements for both full load and IPLV efficiencies for either Path A or Path B The table shows the minimum efficiency ratings to qualify for the prescriptive incentive which must be consistent with the expected operating conditions of the efficient chiller For example if the efficient chiller satisfies Path A and generally performs at part load the appropriate baseline chiller efficiency is the IPLV value under Path A If the efficient chiller satisfies Path B and generally performs at full load the appropriate baseline chiller efficiency is the full load value under Path B Generally chillers operating above 70 percent load for a majority (50 or more) of operating hours should use Path A and chillers below 70 load for the majority of operating hours should use Path B

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 30

C3 lt 75 tons

C4 75 tons and lt 150 tons

cs ~ 150 tons and lt 300 tons C6 ~ 300 tons

Water Cooled Centrifugal Chillers C7 lt 300 tons CB ~ 300 tons and lt 600 tons

C9 ~ 600 tons

Path A

Qualifying Full Load Efficiency

Qualifying IPLV Efficiency

Path B

Qualifying Full Load Efficiency

Qualifying IPLV Efficiency

0780 kWton 0567 kWton 0800 kWton 0540 kWton

0775 kWton 0554 kWton 0790 kWton 0527 kWton

0680 kWton 0522 kWton 0718 kWton 0486 kWton 0620 kWton 0486 kWton 0639 kWton 0441 kWton

0634 kWton 0536 kWton 0639 kWton 0405 kWton 0576 kWton 0494 kWton 0600 kWton 0360 kWton

0570 kWton 0494 kWton 0590 kWton 0360 kWton

I

Incentive ($ton)

$17

$17

Unitary Chiller Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 31

Refrigeration

Anti-Sweat Heater Controls Incentives are offered for devices that sense the relative humidity in the air outside of the display case and cycles or turns off the glass door (if applicable) and frame anti-sweat heaters when the ambient dew point is below a preset set point Technologies that can turn off anti-sweat heaters based on sensing condensation (on the inner glass pane) also qualify Incentive is based on the number of doors

Evaporator Fan Controls This measure is for the installation of controls in medium temperature walk-in coolers The controller reduces airflow of the evaporator fans when there is no refrigerant flow The measure must control a minimum of 120 HP where fans operate continuously at full speed The measure also must reduce fan motor power by at least 75 during the off cycle This measure is not applicable if any of the following conditions apply 1) Compressor runs all the time with high duty cycle 2) Evaporator fan does not run at full speed all the time 3) Evaporator fan motor runs on poly-phase power 4) Evaporator fan motor is not shaded-pole or permanent split capacitor (PSC) 5) Evaporator fan does not use off-cycle or time-off defrost

Floating Head Pressure Controls Controls must vary head pressure to adjust condensing temperatures in relation to outdoor air temperature Must replace existing constant pressure or manually controlled systems to achieve reduced head pressure in order to maintain a minimum saturated condensing temperature of 70 degF or a 20 degF variance below design heat pressure during mild weather conditions Compressor size must be at least 5 HP

Automatic Door Closers for Walk-In Coolers and Freezers The auto-closer should be applied to the main insulated opaque door(s) of a walk-in cooler or freezer The auto-closer must be able to firmly close that door when it is within one inch of full closure This must be a newly installed automatic door closer replacements on previously installed door closers are not eligible for an incentive

EC Motor for Walk-inReach-in Refrigerated cases or Freezer cases Incentives are offered for replacement of an existing standard-efficiency shaded-pole or permanent split capacitor evaporator fan motor in refrigerated display cases or fan coil in walk-ins The replacement unit must be an Electronically Commutated Motor (ECM) This measure cannot be used in conjunction with the Evaporator Fan Controller measure

ENERGY STAR Solid Door Freezer and Glass Door Freezer and Refrigerators Incentives are offered for replacement of existing self-contained refrigerators and freezers with units that are ENERGY STARreg listed Only units with built-in refrigeration systems are qualified Units with remote refrigeration systems or units do not qualify Customers must provide proof that the appliance meets the CEE or ENERGY STAR efficiency specifications using ASHRAE Standard 72-2005 (38degF plusmn 2degF) Incentive is per unit

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 32

Refrigeration Suction Pipe Insulation 1 Must insulate bare refrigeration suction lines of 1 58 inches in diameter or less on existing equipment only 2 Cooler lines require frac34 inch of flexible closed-cell nitrite rubber or an equivalent insulation 3 Freezer lines require 1-inch of flexible closed-cell nitrite rubber or an equivalent insulation 4 Insulation exposed to the outdoors must be protected from the weather (ie jacketed with a medium-gauge aluminum jacket)

Night Cover 1 Must install a cover on an existing open refrigerated display case to decrease its cooling load during off hours 2 The equipment manufacturer must not object to the use of night covers for the existing display case model 3 This rebate is based on the linear footage of the installed 4 The cover must be applied for a period of at least six hours

Strip Curtain on Walk-In CoolerFreezer 1 New strip curtains or plastic swinging doors must be installed on doorways of refrigerated spaces (conditioned to less than 50deg F) 2 Rebate is based on the linear footage of the doorway that the strip curtains are being installed in 3 Opening between the strip curtain and bottom of doorway must be no larger than 1 inch 4 Strips must have an overlay greater than 1 inch

Evaporator Coil Defrost Control 1The current system must include an operating electric defrost system with a functional electroshymechanical time clock 2 Evaporator coil temperature and pressure must be monitored by controller in order to determine optimal defrost cycles 3 New intelligent control systems to control the defrost systems will typically replace timed- defrost controls

Variable Speed Refrigeration Compressor This measure VSD control for refrigeration systems and its eligibility targets applies to retrofit construction in the commercial and industrial building sectors it is most applicable to grocery stores or food processing applications with refrigeration systems This protocol is for a VSD control system replacing a slide valve control system

Add Doors to Open Refrigerated Cases The eligible retrofit equipment is either no sweat doors or doors with anti-sweat heaters If a lighting retrofit is included with the new doors it must consume the same amount of energy or less energy than the old lighting Upgrades to lighting or other system components should be processed separately Horizontal cases are not eligible and should be processed as custom

Door Gaskets PECO Smart Ideas For Your Business CampI Program Application Manual

Q1 2017 pg 33

This measure is applicable to commercial refrigeration and applies to the replacement of worn-out gaskets with new better-fitting gaskets Applicable gaskets include those located on the doors of walk-in andor reach-in coolers and freezers This protocol applies to the main doors of both low temperature (ldquofreezerrdquo ndash below 32 degF) and medium temperature (ldquocoolerrdquo ndash above 32 degF) walk-ins

Zero Energy Doors For this measure a no-heatlow-heat clear glass door must be installed on an upright display case It is limited to door heights of 57 inches or more Doors must have either heat reflective treated glass be gas filled or both This measure applies to low temperature cases onlymdashthose with a case temperature below 0degF Doors must have 3 or more panes Total door rail glass and frame heater amperage ( 120 volt) cannot exceed 039413 amps per door for low temperature display cases Rebate is based on the door width (not including case frame)

Air Cooled Refrigeration Condenser Approach temperature lt8F for low temperature loads lt13F for medium temperature loads

Oversized Condenser with VFD New standalone condenser must no more than 150 larger than load

Case Light Occupancy Controls Acceptable for freezer or refrigerated cases as well as open cases or cases with doors

LED Open Case Lighting For replacing open case T8 or T12 fluorescent fixtures with DLC listed LEDs on refrigerators coolers and freezers

LED Enclosed Case Lighting Refrigerated LED case lighting with or without motion sensors on enclosed refrigerated vertical displays The baseline equipment is assumed to be cases with uncontrolled T8 or T12 linear fluorescent lamps

LED Enclosed Case Lighting Freezer LED case lighting with or without motion sensors on enclosed freezer vertical displays The baseline equipment is assumed to be cases with uncontrolled T8 or T12 linear fluorescent lamps

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 34

Refrigeration Measures Ref Measure

Measure Incentive Unit IncentiveUnit Code R01 Anti-Sweat Heater Controls Door $30

R02 Evaporator Fan Controls Controller $50

R03 Floating-head Pressure Controls HP $20

R04 Automatic Door Closers fo r Walk-in Coolers Door $75

R05 Automatic Door Closers fo r Walk-in Freezers Door $75

R06 Evaporator Fan EC Motor fo r Reach- in Cases Motor $35

RO Evaporator Fan EC Motor fo r Walk-in Cases Motor $50

R08 ENERGY STARreg Glass Door Freezer lt15 Cu Ft Unit $100

R09 ENERGY STARreg Glass Door Freezer 15- 49 Cu Ft Unit $125

R10 ENERGY STARreg Glass Door Freezer ~ 50 Cu Ft Unit $145

R11 ENERGY STARreg Solid Door Freezer Unit $75

R12 ENERGY STARreg Glass Door Refrigerator lt50 Cu Ft Unit $30

R13 ENERGY STARreg Glass Door Refrigerator gt= 50 Cu Ft Unit $50

K14 t NtKGY ~ I AKreg ~Olld Uoor Ketngerator $ OU Cu t-t Unit $~0

R15 Suction Pipe Insulation Walk-in Coolers Linear Foot $050

R16 Suction Pipe Insulation Walk in Freezers Linear Foot $075

R17 Night Cover Linear Foot $800

R18 Strip Curtains on Walk-in Cooler Linear Foot $250

R19 Evaporator Coil Defrost Control Controller $7500

R20 Variable Speed Refrigeration Compressor Compressor $85

R21 Add Doors to Open Refrigerated Cases Door $55

R22 Door Gaskets Door $250

R23 Zero Energy Doors Door $50

R24 A ir Cooled Refrigeration Condenser Ton $10

R25 Oversized Condenser with VFD Ton $10

R26 Case Light Occupancy Controls Door $8

R27 LED Open Cose Lighting Cose $10

R28 LED Enclosed Case Lighting Refrigerated Door $30

R30 LED Enclosed Case Lighting Freezer Door $30

Refrigeration Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 35

Food Service Beverage and Snack Machine Controls Incentives are offered for refrigerated vending machines that contain non-perishable bottled and canned beverages Controller for both types of systems must include a passive infrared occupancy sensor to turn off fluorescent lights and other energized machine systems when the surrounding area is unoccupied for 15 minutes or longer For the refrigerated machines the control logic may include periodic power up at 2-hour intervals or longer to maintain product temperature and provide compressor protection

ENERGY STARreg Refrigerated Beverage Vending Machines Incentives are offered for ENERGY STARreg beverage vending machines Qualifying machines can be found at httpswwwenergystargovproductsothervending_machines

ENERGY STARreg Electric Steam Cooker This measure applies to the installation of electric ENERGY STAR steam cookers as either a new item or replacement for an existing unit Gas steam cookers are not eligible The steam cookers must meet minimum ENERGY STAR efficiency requirements A qualifying steam cooker must meet a minimum cooking efficiency of 50 percent and meet idle energy rates specified by pan capacity

ENERGY STARreg Electric Combination Oven This measure applies to electric ovens capable of handling single 12 x 20 x 25 pan per rack

ENERGY STARreg Commercial Convection Oven The oven must meet or exceed heavy load potato cooking energy efficiency of greater than 70 utilizing ASTM Standard F149 Applies only to electric ovens

ENERGY STARreg Commercial Fryers The commercial fryer must have a tested heavy load (French fry for large vats) cooking energy efficiency of greater than 80 utilizing American Society for Testing and Materials (ASTM) Standard F1361 for commercial fryers and ASTM Standard F2144 for large vat fryers Multiple vat configurations are paid per qualifying vat ENERGY STAR maintains a list of qualifying products and specifications at httpwwwenergystargov

ENERGY STARreg Commercial Hot Holding Cabinet Energy STAR rating electric

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 36

Food Service amp Other Measures FoodOther

Measure Incentive Unit Incentive

Measure Code Unit

F01 Beverage Machine Controls Unit $25

F02 Snack Machine Controls Unit $20

F03 ENERGY STARreg Refrigerated Beverage Vending Machir Unit $125

F04 ENERGY STARreg Commerc ial Steam Cooker Unit $200

F05 ENERGY STARreg Electric Combination Oven Unit $200

F06 ENERGY STARreg Commercial Electric Convection Oven Unit $150

F07 ENERGY STARreg Commerc ial Fryers Unit $100

F08 ENERGY STARregCommerc ial Hot Holding Cabinet Unit $200

Food Service Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 37

Motors and Variable Frequency DrivesEarly Replacement Motors For constant speed and uniformly loaded motors this measure applies to the replacement of old motors with new energy efficient motors of the same rated horsepower Old motors must be less than 15 years Replacements where the old motor and new motor have different horsepower ratings are considered custom measures Motors with variable speeds variable loading or industrial-specific applications are also considered custom measures

Motors Incentive Table Motors

Measure Code

HP Incentive per Motor

M01 15 - 10 $40 M02 11 - 50 $100 M03 51-100 $150 M04 gt100 $300

Only VFDs on unitary systems are eligible Non-unitary systems must be submitted as a custom measure Soft start motors are not eligible

Variable Frequency Drives on HVAC Fan Applications Incentives are offered for installing VFDs on existing HVAC fans that do not have pre-existing VFDs This measure applies to HVAC supply and return fans only All other fans including cooling tower fans must be submitted as custom measures Manually fixed speed settings on HVAC fans must be submitted via custom application The VFD must control motor speed automatically in response to pressure flow temperature or other variable signal The installation of a VSD must accompany the permanent removal or disabling of any throttling devices such as inlet vanes bypass dampers and throttling valves etc The incentive is offered per controlled HP

Variable Frequency Drives on Pump Applications Incentives are offered for installing VFDs on existing chilled water pumps and heating hot water pumps that do not have existing VFDs This measure applies to chilled water pumps and heating hot water pumps only All other pumps must be submitted as custom measures Manually fixed speed settings on pumps must be submitted via custom application The VFD must control motor speed automatically in response to pressure flow temperature or other variable signal The installation of a VSD must accompany the permanent removal or disabling of any throttling devices such as throttling valves The incentive is offered per controlled HP

Variable Speed Control for Kitchen Exhaust Hoods The measure consists of installing a new VSD in conjunction with a sensor control system that varies the exhaust rate of kitchen ventilation (exhaust andor makeup air fans) based on the heat and effluent output from the cooking appliances (ie the more heat and smokevapors generated the more ventilation needed) This involves installing a temperature sensor in the hood exhaust collar andor an optic sensor on the end of the hood that senses cooking conditions and allows the system to automatically vary the rate of exhaust to match requirements by adjusting the fan speed accordingly

Variable Speed Drives for Process or Other Equipment VFD must be used in conjunction with a process (non HVAC) application To qualify for this incentive the driven equipment must operate at least 2000 hours per year Redundant or back- up units do not qualify VFDs replacing existing VFDs do not qualify The VFD must control motor

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 38

speed automatically in response to pressure flow temperature or other variable signal VFDs installed as ldquosoft startrdquo without automatic manual closed loop speed control do not qualify The installation of a VFD must accompany the permanent removal or disabling of any throttling devices such as throttling valves The incentive is per controlled HP and only applies to controlled motors less than 50 HP

VSDVFD Incentives Table VFD

Measure Code

Measure Unit Incentive per Unit

Fan Application

V01 VFD on HVAC Fan HP $25 Pump Application

Variable Speed Control for Kitchen Exhaust Hoods

Variable Speed Drives for Process or Other Equipment

V02 VFD on Chilled Water Pumps HP $25 V03 VFD on Heating Hot Water Pumps HP $25

V04 Kitchen Exhaust Fan Retrofit Hood HP $500

V05 Process Motor lt 50 HP HP $50

Domestic Hot Water Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater This measure documents the energy savings attributed to converting from a standard electric water heater to an ENERGY STAR natural gaspropane-fired water heater or a standard oil-fired water heater with an Energy Factor of 0585

Heat Pump Water Heater This includes heat pump water heaters with energy factors meeting ENERGY STAR criteria The measure described here involves a direct retrofit of a resistive electric water heater with a heat pump water heater It does not cover systems where the heat pump is a pre-heater or is combined with other water heating sources More complicated installations can be treated as custom projects

Low Flow Pre-Rinse Spray Valve This measure applies to efficient low flow pre-rinse sprayers in grocery and food service applications The most likely areas of application are kitchens in restaurants and hotels Only premises with electric water heating may qualify for this incentive In addition the replacement pre-rinse spray nozzle must use less than 16 gallons per minute with a cleanability performance of 26 seconds per plate or less Low flow pre-rinse sprayers reduce hot water usage and save energy associated with water heating

Domestic Hot Water Incentive Table

Measure Code Measure Unit Retrofit Incentive per

Unit

W01 Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater Unit $100

W02 Heat Pump Water Heater Unit $100 W03 Low-Flow Pre-Rinse Spray Valve Valve $17

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 39

Compressed Air SystemsNo-loss Condensate Drain No-loss Condensate Drains are controlled by a sensor that monitors the level of condensate and only open when there is a need to drain condensate They close before compressed air is allowed to escape This measure is targeted to non-residential customers whose equipment is a timed drain that operates on a pre-set schedule Acceptable baseline conditions are compressed air systems with standard condensate drains operated by a solenoid and timer

Air-Entraining air nozzle This measure is targeted to non-residential customers whose compressed air equipment uses stationary air nozzles in a production application with an open copper tube of 18rdquo or 14rdquo orifice diameter Energy efficient conditions require replacement of an inefficient non-air entraining air nozzle with an energy efficient air-entraining air nozzle that use less than 15 CFM at 100 psi for industrial applications

Storage Tanks for LoadNo Load Screw Compressors This measure protocol applies to the installation of air receivers with pressureflow controls to loadno load compressors Loadno load compressors unload when there is low demand The process of unloading is done over a period of time to avoid foaming of the lubrication oil Using a storage tank with pressureflow control will buffer the air demands on the compressor Reducing the number of cycles in turn reduces the number of transition times from load to no load and saves energy The baseline equipment is a loadno load compressor with a 1 galcfm storage ratio or a modulating compressor with blowdown The high efficiency equipment is a loadno load compressor with a minimum storage ratio of 4 gallons of storage per cfm

Cycling Refrigerated Thermal Mass Dryer When air is compressed water vapor in the air condenses and collects in liquid form Some of this condensate collects in the air distribution system and can contaminate downstream components such as air tools with rust oil and pipe debris Refrigerated air dryers remove the water vapor by cooling the air to its dew point and separating the condensate Changes in production and seasonal variations in ambient air temperature lead to partial loading conditions on the dryer Standard air dryers use a hot gas bypass system that is inefficient at partial loads A Cycling Thermal Mass Dryer uses a thermal storage medium to store cooling capacity when the system is operated at partial loads allowing the dryer refrigerant compressor to cycle

This measure is targeted to non-residential customers whose equipment is a non-cycling refrigerated air dryer with a capacity of 600 cfm or below Acceptable baseline conditions are a non-cycling (eg continuous) air dryer with a capacity of 600 cfm or below The replacement of desiccant deliquescent heat-of-compression membrane or other types of dryers does not qualify under this measure

Variable Speed Air Compressor This type of compressor uses a special drive to control the speed (RPM) of the unit which in turn saves energy compared to a fixed speed equivalent

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 40

No-loss Condensate Drain Air-Entraining Air Nozzle Cycling Refrigerated Thermal Mass Dryer

Compressor Incentive per

Equipment Type Units Quantity Daily Operating Unit

Hours

CA04 Storage Tanks for LoadNo Load Screw

Compressor HP $10 Compressors

CA05 Variable Speed Air Compressor

Compressor HP $30

CA06 Compressed Air System Optimization

Compressor HP $50

Compressed Air System Optimization The submitted optimization measures must be identified in an Air System Audit or equivalent study to be eligible The measures must demonstrate energy savings as evaluated by a Program Engineer Additionally measures must also fall under one or more of the category below to be eligible

1) Install storage Receivers (new receivers only replacing existing storage receivers are ineligible)

2) Compressor control (must demonstrate improvement in partial load efficiency of the compress air system including reduceeliminate partially loaded units)

3) Dryer control 4) Source pressure reduction 5) Right-sizing distribution components such as piping filters regulators

connectors and hoses (routine maintenance replacements are ineligible) 6) Leakage detection and repair 7) Eliminate low-efficiency end-usages of compressed air 8) Heat recovery (most reduce electricity consumption of the replaced heat source)

Compressed Air Systems Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 41

lt65000 Btuh

~ 65000 Btuh and lt135000 Btuh

135000 Btuhand lt240000 Btuh

240000 Btuh and lt760000 Btuh

760000 Btuh

154

142

135

125

123

Chiller Capacity Path APath B efficiency (kWton )

lt 150 tons

~150 tons and lt300 tons

300 tons and lt400 tons

400 tons and lt600 tons

600 tons

lt75 tons

~75 tons and lt150 tons

~150 tons and lt300 tons

~300 tons and lt600 tons

600 tons

0610 FU0695 FL and 0550 IPLV0440 IPLV

0610 FU0635 FL and 0550 IPLV0400 IPLV

0560 FU0595 FL and 0520 IPLV0390 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

Path APath B efficiency (kWton )

0750 FU0780 FL and 0600 IPLV0500 IPLV

0720 FU0750 FL and 0560 IPLV0490 IPLV

0660 FU0680 FL and 0540 IPLV0440 IPLV

0610 FU0625 FL and 0520 IPLV0410 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

Data Centers Data Center incentives are available for facilities ranging in size from office server closets to large standalone facilities

Air Cooled Chiller Path APath B EER (BtuWh) lt150 tons 101 FL97 FL and 137 IPLV158 IPLV ge150 tons 101 FL97 FL and 140 IPLV161 IPLV

Air Cooled Chiller without Condenser Air-cooled chillers without condenser must be rated with matching condensers and comply with air-cooled chiller efficiency requirements

Computer Room Air Conditioner

Computer Room Air Handler Variable Speed Replacing constant speed CRAH with VSD CRAH

Water Cooled Centrifugal Chiller

Water Cooled Positive Displacement or Reciprocating Chiller

Uninterruptible Power Supply Must be Energy Star Certified UPS or have full load efficiency rating

ge948 for 20-100 kVA ge978for ge100 kVA

Mainframe Refresh The rated efficiency of the replacement Mainframes power supply must be at least 8 more

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 42

- Equipment Type Units IncentiveUnit

D1 Air Cooled Chiller Ton $4000 D2 Air Cooled Chiller W ithout Condenser Ton $2000 D3 Computer Room Air Conditioner Ton $3000 D4 Computer Room Air Handler Variable Speed Ton $1000 D5 Water Cooled Centrifugal Chiller Ton $3000 D6 Water Cooled Positive Displacement or Reciprocatin $3000 D7 Uninterruptible Power Supply 20-100 kVA $1000 D8 Uninterruptible Power Supply gt 100 kVA $1000 D9 Mainframe Refresh $2000

D10 Server Refresh $2000 D11 PC Power Managment System $600 D12 HVAC System Optimization $005 D1 3 HoUCold Aisle Containment kWh saved $005 D14 Server Virtualization kW reduction $40000 D1 5 Thin Clients Units $500

efficient compared to the existing Mainframes power supply The replacement Mainframe if Inactive must be decommissioned and removed from the Data Center

Server Refresh Replacement servers must be ENERGY STARreg certified Replacement servers power supply must be 5 more efficiency compared to the power supply of the replaced servers The replaced server must be decommissioned and removed from the data center

HVAC System Optimization Final system must have these features

-Implementation of free cooling by the addition of an economizer system -Conversion of constant speed CRACCRAH into variable speed operations using VFDs and additional control functionalities and -Elevation of exhaust air temperature

HotCold Aisle Containment Includes both Hot and Cold Aisles Installing new containment measures not replacing already existed aisle containment Plenum-only installations not eligible Must result in higher difference between the return air (hot aisle) and supply air (cold aisle) temperatures measured at rack intake and exhaust locations

Server Virtualization Minimum of consolidating 5 Servers virtualized into one Server The virtualized servers if inactive are removed from the Data Center

Thin Clients Must be ENERGY STAR certified thin clients Decommissioned clients are removed from the Data Center

Data Center Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 43

Whole Building Systems Whole Building Systems Approach

The Whole Building Systems approach is intended to encourage integrated energy efficient designs by providing enhanced incentives to the customer who addresses overall energy performance Owners of eligible and qualifying new construction and major renovation projects can receive Whole Building Systems incentives when energy modeling indicates the projectrsquos performance is over 10 better than the ASHRAE 901-2007 Savings from eligible electric end-uses in kilowatt hours define the amount of financial incentive Energy savings achieved through renewable energy sources are not counted toward project energy savings and are not included in the savings basis Incentive reservations obtained during the design phase of a project will be honored for up to 24 months

How to Apply for Whole Building Systems Incentives Before construction begins bull A Pre-notification Application must be submitted documenting the Owners intention to

seek Whole Building Systems incentives bull The Owner must confirm the goals and energy efficiency strategies being pursued by the

design team on the completed Pre-notification Worksheet (Checklist tab) and in the project Summary (Whole Building Performance Summary tab)

bull Submit executable building modeling software files bull Submit the Whole Building Performance Summary worksheet energy simulation model

inputs and outputs and supporting documentation bull Receive confirmation and eligibility notification from the PECO Smart Ideas team and

receive an incentive reservation bull The final incentive paid may differ from the reserved incentive amount The final

incentive will be calculated based on site-verified equipment installation and performance The Owners final application and complete documentation must be received within 6 months of equipment installation or certificate of occupancy whichever is later

bull An executable energy model and model output demonstrating compliance with the criteria of ASHRAE 901-2007 Appendix G will be required and the equipment data sheets LED lighting fixtures must be on the DLC or Energy STAR qualified products list (QPL) to be eligible LED fixtures not on the DLC or Energy STAR QPL has the option of submitting LM79 and LM80 test reports for evaluation against DLC and Energy STAR eligibility criteria

During the construction period bull Owner and design team continue to work closely with their chosen contractor to assure

energy efficiency measures are included and installed in the completed building

When the building is constructed and operational bull Complete the Owner final application Request an equipment verification site visit by the

PECO Smart Ideas team Equipment must be installed and fully operational o Program staff will schedule a site visit and utilize submitted documentation and

measurement tools to verify that the installation follows the submitted energy simulation model

bull When PECO confirms that there are no significant changes to the installed equipment payment of the reserved incentive will be made to the Owner within 6 weeks

bull If changes from the proposed design energy simulation are found the Owner and design team will be notified of the reduced incentive amount a period of 20 calendar days will

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 44

Improvement Incentive per Sq Ft

over Code

~11 to lt20 $0155

~20 to lt30 $0233

~30 to lt40 $0350

~40 to lt60 $0525

~60 $0700

be allowed for supplemental information to be provided if no additional information is received by PECO Smart Ideas team the reduced incentive payments will be made and sent to the Owner if additional clarification and information is available program staff will work diligently to resolve the discrepancies and arrive at a reasonable incentive adjustment with the customer

Payments made by PECO Smart Ideas are final

Customer Eligibility The Owner of the proposed new building project must be a customer of PECO and receive delivery of electric service from PECO to receive kilowatt-hour based incentives Please note that electricity supply can be provided by any vendor

Project Eligibility bull The project must be a new construction or major renovation Major renovations involving

the removal and redesign of at least two building systems (such as interior lighting and mechanical systems) may apply for Whole Building Systems incentives

bull To qualify for incentives projects must demonstrate energy efficiency enhancements that achieve at least 11 improvement in the proposed design versus the standard baseline

bull The Owner must submit a Pre-approval Application to the program at the stage where changes for increased energy efficiency are still feasible and construction has not been completed

bull Projects receiving Whole Building Systems incentives are not eligible to receive other incentives such as the prescriptive or custom program incentives for the same scope

bull Project components that are NOT eligible for consideration as a basis for PECO Smart Ideas include the following o Alternative fuel sources (eg use of gas or oil equipment in lieu of electric) Please note

that combined heat and power (CHP) systems will be incentivized for the electricity they produce

o Renewable energy sources (eg solar wind biomass) bull Ineligible savings include exterior lighting process receptacle miscellaneous loads and

other unregulated end-uses Custom incentives are available for new construction exterior lighting

Whole Building Systems Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 45

Custom Project Specifications Instructions for Energy Savings Calculations for Custom Projects Custom projects must involve measures that result in a reduction in electric energy use (kWh) Electricity savings may result from either efficiency improvements or fuel switching Custom Incentives are based on the first year kilowatt-hour savings Custom applications must be accompanied by detailed engineering calculations that document the annual total energy savings

The following serve as guidelines for the minimum required documentation

Equipment Information Submittals bull A list of the present and proposed equipment and components to be installed

including manufacturerrsquos catalogmodel number bull Manufacturerrsquos specification sheets showing capacities and performance for all major

components

Energy Savings Calculations Provide calculations documenting the predicted energy consumption of the existing (or baseline) and proposed system using appropriate analytical tools and clearly stated assumptions Calculations may be performed by ldquohandrdquo but spreadsheet analysis or more rigorous modeling is preferred All analysis should be provided in electronic format All assumptions such as operating hours existing and proposed equipment operational details must be presented Engineering algorithms and procedures from recognized technical organizations such as ASHRAE SMACNA ANSI etc must be used Use rated performance factors tested under accepted procedures specified by recognized rating agencies such as AHRI ANSI ASTM etc Provide an explanation when equipment performance rating conditions vary from standard conditions

In support of the calculations extensive documentation must be provided that provides the basis for the savings estimates The documentation must provide information on the equipment operating schedule daily and seasonal load profile and baseline AND energy efficient equipment performance at the operating loads Typical documentation for custom projects often includes bull Engineering or architectural drawings and ldquoequipment schedulerdquo sheets bull Component specification sheets that include part load efficiency or performance

factors bull Spreadsheet calculations or inputoutput files and results from system modeling or

other engineering analysis using accepted engineering algorithms and practices bull Log sheets trend logs from a building management system or other operating

documentation that are often necessary to document operating hours and equipment loading and used as a basis for the calculations (in some cases short term monitoring may be required to document the load profile)

bull Control sequence of operations that are necessary where controls play a part in the savings equation

Additional documentation other than that described in the application may be required for program participation Larger projects may also require pre- and post-project sub metering or monitoring of loads andor power input as part of another measurement and verification activity to demonstrate the actual energy savings that are realized

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 46

Baseline for Custom Analysis Where equipment is replaced prior to the end of its rated service life in order to achieve energy savings the existing equipment performance may be used as the baseline in the energy savings calculations Where equipment is replaced due to failure or for other reasons (such as obsolescence or a need for more capacity) the baseline performance used in the savings calculation should be either the minimum performance that would be required by code for that equipment type and application (where a code applies) or the performance of the equipment that would have been selected as the customers standard practice when a code does not apply

Baseline or Existing System Summary On custom worksheet on application form include make model number name plate information (such as operating voltage and rated full load amps) rated capacity quantities equipment condition and age facility operating hours equipment operating schedule and load curves If needed attach separate sheets

All decisions regarding incentives for custom projects are in the sole discretion of PECO

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 47

APPENDIX PROGRAM UPDATES SUMMARY (Q1 2017) Multifamily Nursing Home and Assisted Living retrofit customers need to apply for incentives through the PECO Smart Ideas Multi-Family Program administered by Franklin Energy For more information please contact Taylor Adler at tadlerfranklinenergycom or call 1-844-4BIZ-SAVE Multifamily Nursing Home and Assisted Living new construction customers can proceed with applying for incentives here

Revised Incentives

Data Centers

Measure Incentive Effective Immediately Previous Incentive

Air-cooled chiller for data centers $40ton $10ton Air-cooled chiller without condenser for data centers $20ton $10ton

Computer room air conditioner $30ton $7ton Water-cooled centrifugal chiller for data centers $30ton $5ton Water-cooled positive displacement or reciprocating chiller for data centers

$30ton $5ton

Uninterruptible power supply 20-100 kVA $10kVA $6kVA Uninterruptible power supply gt100 kVA $10kVA $1kVA Mainframe refresh $20kW installed $5kW installed Server refresh $20kW installed $4kW installed Server virtualization $400kW reduction $4kW reduction Thin clients $5units $4units

Lighting (Effective Immediately)

Measure Incentive Effective Immediately Specification Previous

Incentive Specification

New construction exterior LED outdoor flood light LED parking garage and canopy lighting LED polearm mounted parking and roadway lighting LED wall mount fixture

$005kWh (custom)

Lighting Power Density (LPD) Requirements Unchanged

$10-54 fixture

Lighting Power Density (LPD) (Wft2) by Space Type or Building Area

LED Replacement Lamps (Tubes) 2

$250lamp 5 Min Watts Reduced

$250lamp 6 Min Watts Reduced

LED Replacement Lamps (Tubes) 4

$400lamp 10 Min Watts Reduced

$400lamp 12 Min Watts Reduced

Permanent Fixture Removal $010Watt removed

Clarification of calculation to represent actual Wattage removed

$010Watt removed

Lighting (Effective 6117)

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 48

Measure Incentive Effective 6117 Specification Previous

Incentive Previous Specification

Interior LED high-bay fixtures andor retrofit kits if lt 20000 LED Lumens

$50fixture 150 Min Watts Reduced

$75fixture 150 Min Watts Reduced

Interior LED high-bay fixtures andor retrofit kits if gt 20000 LED Lumens

$75fixture 225 Min Watts Reduced

$75fixture 150 Min Watts Reduced

New Incentives

Compressed Air

Measure New Incentive Effective Immediately Variable speed air compressor $30compressor HP Compressed air system optimization $50compressor HP

HVAC

Measure New Incentive Effective Immediately ECM circulation pump $50pump Retro-commissioning cooling systems $750ton Retro-commissioning whole building $010square foot Energy management system $25ton Demand controlled ventilation $25ton Water-cooled air conditioner $22ton

Food Service

Measure New Incentive Effective Immediately Combination oven $200unit ENERGY STARreg commercial convection oven $150unit ENERGY STARreg commercial fryers $100unit ENERGY STARreg commercial hot holding cabinet $200unit

Refrigeration

Measure New Incentive Effective Immediately Air-cooled refrigeration condenser $10ton Oversized condenser with VFD $10ton Case light occupancy controls $750door

Lighting

Measure New Incentive Effective Immediately Interior central lighting controls $00175sq foot

Motors and Drives

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 49

-

Measure New Incentive Effective Immediately VFD for dust collection system motor $50HP

Application Clarifications and Revised Requirements

Clarification of LED Eligibility for New Construction or Retrofit Projects

LED Eligibility is determined by whether lighting products are listed in either the DesignLights Consortium (DLC) Qualified Products List of commercial-grade LED luminaires or the US Environmental Protection Agency database of ENERGY STAR certified products For products not yet listed contractors may submit LM79 and LM80 test reports PECO Smart Ideas engineers will review test reports to determine if the product in question meets performance specifications

Revised W 9 Requirement

W-9 forms EIN numbers are no longer required

Deletion of erroneous statement in New Construction Lighting

The following statement from previous Business Manual has been deleted ldquoThe minimum lighting power density used to calculate the incentive shall be no lower than 50 of the ASHRAE 901-2007 valuerdquo

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 50

  • Commercial amp Industrial Program Application Manual
    • Follow This Easy Process
      • Pre-Approval Application Checklist
      • Final Application Checklist
          • Terms and Conditions
            • Program Effective Dates
            • Program and Project Eligibility
            • Incentive Payment Limits
            • Application Review Process
            • Inspections andor PUCrsquos Statewide Program Evaluation
            • Requirements for Custom Project Electricity Savings Calculation
            • Tax Liability
            • No Endorsement
            • Warranties
            • Limitation of Liability
            • Assignment
            • Customerrsquos Certification
            • Termination
            • Acknowledgement
              • Retrofit Lighting Solutions
                • General Linear Fluorescent Lamp and Ballast Specification Requirements
                • LED Lamps and Fixtures
                • Minimum Watts Reduced
                • Linear LED (Tubes)
                • Permanent Fixture Removal
                  • LED Traffic Signals
                    • LED Traffic Signals Incentive Table
                      • New Construction Lighting Specifications
                        • New Construction Lighting Incentives Table
                          • New Construction Lighting Power Density Code
                              • Exterior New Construction Lighting
                              • HVAC Equipment
                                • Air-Source Air Conditioners and Air-Source Heat Pumps
                                • Package Terminal Systems (Replacements)
                                • Ductless Mini-Split Heat Pump lt54 Tons
                                • Geothermal Heat Pump
                                  • Other HVAC Equipment
                                    • Hotel Guest Room Occupancy Sensor
                                    • ECM Circulation Fan
                                    • ECM Circulation Pump
                                    • Retrocomissioning Cooling Systems
                                    • Retrocomissioning Whole Building
                                    • Energy Management System
                                    • Demand Controlled Ventilation
                                    • Other HVAC Incentives Table
                                      • Unitary HVAC Chillers
                                        • Air-Cooled Chillers Water Cooled Positive Displacement Reciprocating Chillers and Water Cooled Centrifugal Chillers
                                          • Refrigeration
                                            • Anti-Sweat Heater Controls
                                            • Evaporator Fan Controls
                                            • Floating Head Pressure Controls
                                            • Automatic Door Closers for Walk-In Coolers and Freezers
                                            • EC Motor for Walk-inReach-in Refrigerated cases or Freezer cases
                                            • ENERGY STAR Solid Door Freezer and Glass Door Freezer and Refrigerators
                                            • Refrigeration Suction Pipe Insulation
                                            • Night Cover
                                            • Strip Curtain on Walk-In CoolerFreezer
                                            • Evaporator Coil Defrost Control
                                            • Variable Speed Refrigeration Compressor
                                            • Add Doors to Open Refrigerated Cases
                                            • Door Gaskets
                                            • Zero Energy Doors
                                            • Air Cooled Refrigeration Condenser
                                            • Oversized Condenser with VFD
                                            • Case Light Occupancy Controls
                                            • LED Open Case Lighting
                                            • LED Enclosed Case Lighting Refrigerated
                                            • LED Enclosed Case Lighting Freezer
                                              • Food Service
                                                • Beverage and Snack Machine Controls
                                                • ENERGY STARreg Refrigerated Beverage Vending Machines
                                                • ENERGY STARreg Electric Steam Cooker
                                                • ENERGY STARreg Electric Combination Oven
                                                • ENERGY STARreg Commercial Convection Oven
                                                • ENERGY STARreg Commercial Fryers
                                                • ENERGY STARreg Commercial Hot Holding Cabinet
                                                  • Motors and Variable Frequency Drives
                                                    • Early Replacement Motors
                                                    • Variable Frequency Drives on HVAC Fan Applications
                                                    • Variable Frequency Drives on Pump Applications
                                                    • Variable Speed Control for Kitchen Exhaust Hoods
                                                    • Variable Speed Drives for Process or Other Equipment
                                                      • Domestic Hot Water
                                                        • Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater
                                                        • Heat Pump Water Heater
                                                        • Low Flow Pre-Rinse Spray Valve
                                                        • Domestic Hot Water Incentive Table
                                                          • Compressed Air Systems
                                                            • No-loss Condensate Drain
                                                            • Air-Entraining air nozzle
                                                            • Storage Tanks for LoadNo Load Screw Compressors
                                                            • Cycling Refrigerated Thermal Mass Dryer
                                                            • Variable Speed Air Compressor
                                                            • Compressed Air System Optimization
                                                            • Compressed Air Systems Incentive Table
                                                              • Data Centers
                                                                • Air Cooled Chiller
                                                                • Air Cooled Chiller without Condenser
                                                                • Computer Room Air Conditioner
                                                                • Computer Room Air Handler Variable Speed
                                                                  • Replacing constant speed CRAH with VSD CRAH
                                                                    • Water Cooled Centrifugal Chiller
                                                                    • Water Cooled Positive Displacement or Reciprocating Chiller
                                                                    • Uninterruptible Power Supply
                                                                    • Mainframe Refresh
                                                                    • Server Refresh
                                                                      • Whole Building Systems
                                                                        • Whole Building Systems Approach
                                                                        • How to Apply for Whole Building Systems Incentives
                                                                        • Customer Eligibility
                                                                        • Project Eligibility
                                                                        • Whole Building Systems Incentives Table
                                                                          • Custom Project Specifications
                                                                            • Instructions for Energy Savings Calculations for Custom Projects
                                                                            • Equipment Information Submittals
                                                                            • Energy Savings Calculations
                                                                            • Baseline for Custom Analysis
                                                                            • Baseline or Existing System Summary

Lighting Controls

CTL Unitary Sensor Controls

na

$1500 sensor

Passive infrared ultrasonic detectors are eligible Includes daylighting controls and all occupancy controls

Controls can be onoff stepped or continuous (dimming) Daylight sensor controls are required to be commissioned in order to ensure proper sensor calibration and energy savings

Minimum of 30 watts controlled per control

CLC Interior Central Lighting Controls $00175

square foot of area

under control

Automated central lighting control systems with override capabilities

This measure includes centrally-controlled time clocks wireless on off switches bi level switches computer based

controls pre-set scene selection dimmable ballasts and on-off dimmer switches for non-personal tuning

Floor plan must be submitted verifying square footage

DAYOCC Controls Combination - Daylighting and Occupancy Fixture Mounted $1500 sensor Minimum of 30 watts controlled per control

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 18

LED Traffic SignalsThis measure applies to the early replacement of existing incandescent traffic lights and pedestrian signals with LEDs New LED traffic signals must comply with ENERGY STAR requirements which can be found at httpswwwenergystargoviapartnersproduct_specseligibilitytraffic_eligpdf98bfshy1786

LED Traffic Signals Incentive Table

Round Traffic Signals 8 Red

Incentive per Signal

$15

8 Yellow 8 Green 12 Red

12 Yellow 12 Green

Turn Arrow Signals

8 Red

$13

8 Yellow 8 Green 12 Red

12 Yellow 12 Green

Pedestrian Signals

9 Pedestrian Only

$13

12 Hand Only 12 Pedestrian Only 12 Countdown Only

12 Pedestrian and Hand Overlay 16 Pedestrian and Hand Side by

Side 16 Pedestrian and Hand Overlay

16 Hand and Countdown Side-by-Side

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 19

Lighting Controls that Exceed Code Requirements

New Construction Lighting SpecificationsUnder the Lighting Power Density Approach the lighting power installed is compared with the lighting power allowed by code Incentives are available for systems where the installed lighting power is lower than the code-allowed power by at least 10 Savings are based on the Lighting Power Density (LPD) calculated on a watts per square foot basis Incentives will be paid only on the area of the building where the lighting installation is complete and is ready for occupancy If a portion of a building is not built-out such that the lighting in an area is not complete and ready for occupancy then that portion is not eligible for an incentive Baseline lighting power density is based on ASHRAE 901- 2007 Either the Space-by-Space or Building Area method may be used to calculate the LPD for the purposes of the incentive

Required Documentation bull Lighting Worksheet bull COMcheck Interior Lighting Report or equivalent analysis demonstrating space-byshy

space or building area calculations bull Reflected ceiling plans and electrical plan sheets showing lighting fixture layout bull Lighting fixture schedule sheet including fixture counts bull Fixture submittal or specification sheets showing model number and rated fixture wattage bull Architectural floor plans displaying floor area affected by proposed lighting installation

New Construction Lighting Incentives Table Lighting Wattssq ft

Improvement over of Code Incentive

gt= 10 and lt 20 $0035sq gt= 20 and lt 30 $007sq ft gt= 30 and lt 40 $0105sq

gt= 40 $021 sq ft

Incentives will be paid on a ($005kWh) custom basis Please contact Program Staff for eligibility of lighting controls for New Construction projects

Interior Occupancy Sensors Incentives are offered for occupancy-based controls in areas where they are not required by code Passive infrared ultrasonic detectors and fixture-integrated sensors or sensors with a combination sensor are eligible All sensors must be hard-wired and control interior lighting fixtures The incentive is per Watt controlled An inventory of the controlled fixtures and their wattage must be provided for each sensor with the Final Application

Daylight Dimming System Incentives are offered for daylight sensor controls in spaces with suitable available ambient light for at least part of the day Light may be through skylights clerestories windows or ldquolight tubesrdquo The controls can be onoff stepped or continuous dimming The onoff controller should turn off artificial lighting when the interior illuminance meets the desired indoor lighting level The stepped controller generally dims the artificial lighting 50 when the interior illuminance levels reach 50 of the desired lighting levels Continuous or dimming controllers dim artificial lighting proportionally to the available ambient light All types of daylight sensor controls are required to be commissioned in order to ensure proper sensor calibration and energy savings

Required Documentation bull Cut sheets or submittals of lighting control systems Reflected ceiling plans or schedule

showing which fixtures are controlled by lighting controls

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 20

New Construction Lighting Power Density CodeRequirements ndash Space by Space Method

Building Specific Space Types LPD (Wft2) Building Specific Space Types LPD (Wft2)

GymnasiumExercise Center AutomotivemdashServiceRepair 07

Playing Area 14 Manufacturing

Exercise Area 09 Low (lt25 ft Floor to Ceiling Height) 12

CourthousePolice StationPenitentiary High (gt25 ft Floor to Ceiling Height) 17

Courtroom 19 Detailed Manufacturing 21

Confinement Cells 09 Equipment Room 12

Judges Chambers 13 Control Room 05

Fire Stations HotelMotel Guest Rooms 11 Fire Station Engine Room 08 DormitorymdashLiving Quarters 11

Sleeping Quarters 03 Museum

Post Office-Sorting Area 12 General Exhibition 10 Convention Center-Exhibit Space 13 Restoration 17

Library BankOfficemdashBanking Activity Area 15 Card File and Cataloging 11 Religious Buildings

Stacks 17 Worship Pulpit Choir 24

Reading Area 12 Fellowship Hall 09

Hospital Retail

Emergency 27 Sales Area [For accent lighting see 93121(c)] 17

Recovery 08 Mall Concourse 17

Nurse Station 10 Sports Arena

ExamTreatment 15 Ring Sports Area 27

Pharmacy 12 Court Sports Area 23

Patient Room 07 Indoor Playing Field Area 14

Operating Room 22 Warehouse

Nursery 06 Fine Material Storage 14

Medical Supply 14 MediumBulky Material Storage 09

Physical Therapy 09 Parking GaragemdashGarage Area 02

Radiology 04 Transportation

LaundrymdashWashing 06 AirportmdashConcourse 06

AirTrainBusmdashBaggage Area 10

TerminalmdashTicket Counter 15

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 21

New Construction Lighting Power Density CodeRequirements ndash Building Area Method

Building Area Type 221 LPD (Wft2)

Automotive facility 09

Convention center 12

Courthouse 12

Dining bar loungeleisure 13

Dining cafeteriafast food 14

Dining family 16

Dormitory 1

Exercise center 1

Gymnasium 11

Health-care clinic 1

Hospital 12

Hotel 1

Library 13

Manufacturing facility 13

Motel 1

Motion picture theater 12

Building Area Type LPD (Wft2)

Multifamily 07

Museum 11

Office 1

Parking garage 03

Penitentiary 1

Performing arts theater 16

Policefire station 1

Post office 11

Religious building 13

Retail 15

Schooluniversity 12

Sports arena 11

Town hall 11

Transportation 1

Warehouse 08

Workshop 14

221 In cases where both a common space type and a building specific type are listed the building specific space type shall apply

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 22

Exterior New Construction LightingExterior New Construction savings over code lighting power density will be incentivized using custom lighting measure at $005kWh rate Participants must submit exterior lighting plans Submittals COMCHECK REPORT and lighting schedule for exterior lighting Savings are calculated from the LPD (Wsq ft) indicated below Additional information may be required based on the building exterior type and space description indicated below To contribute to incentive LEDs must satisfy program requirements for DLC Energy Star or equivalent listing

Required Documentation bull COMcheck Interior Lighting Report or equivalent analysis demonstrating space-by-space or

building area calculations bull Drawings showing lighting fixture layout bull Lighting fixture schedule sheet including fixture counts bull Fixture submittal or specification sheets showing model number and rated fixture wattage

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 23

Building Exterior Space Description LPD

Unco erect Pariki Ilg Area Parlurng ots arnd Drives 0 15 WfW

B i ing Grournds W al 1Yays lless Hlan 11] e 10 Wltirneru- 00

W a Nays 10 middot de or greater 112 W

Plaza a reas

Spec rest re areas

Stainh1ays 1ow 2

B i ing 8ntrames and Exits Ma efilbies m wr near foot of door width

Other doors 2o w 1r ear foot of door width

Ctmqpies and Overhimgs Free starndillg and a ched tmd 12s w m2 m bullerhangs

0 door sales Op en areas (ind udi Ilg ve id e sales 05 W lo )

street frontage far vehicle sales lots 21] W linear toot in addi middot on to open are-0bullmiddot lo~nce

B i ing facades 0 2 W tfl2 middot or eacil illumirnated N311 or surface

o r 5 0 Wllinear root fo r eac h m n inated N3l1 o r

surface length

Automated te lle r rnachmiddot es a lld 210 W per loca tion plus 91] night deposito liies W 1pernddiliorml A I middot per

1oca middot om

Eirltrances and gatehouse inspecliion 125 W ffl2 o middot uncovered slatiaBS a goo~ ed acir ies area

Load ing are-0s or law enforcement 0 5 W 2 of u rnco1bullered area fire ambu rnce and otiher emergency service ibullehmiddotctes

Drive-through w indOWs a taslrood 400 W per drive-Hlrough restaurants

Parking near 24 -h our retail 80111 W per main entry entmn ces

HVAC Equipment Air-Source Air Conditioners and Air-Source Heat Pumps New unitary air conditioning units or air source heat pumps that meet or exceed the qualifying cooling efficiency shown in the HVAC Incentives Worksheet are eligible for an incentive They can be either split systems or single package units The efficiency of split systems is based on an ARI reference number All packaged and split system cooling equipment must meet Air Conditioning and Refrigeration Institute (ARI) standards (210240 320 or 340360) be UL listed use a minimum ozone-depleting refrigerant (eg HCFC or HFC) All required efficiencies are based on the Consortium for Energy Efficiency (CEE) high-efficiency commercial air conditioning and heat pump specifications (wwwcee1org) A manufacturerrsquos specification sheet indicating the system efficiency must accompany the application Disposal of the existing unit

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 24

must comply with local codes and ordinances

Package Terminal Systems (Replacements) Package terminal air conditioners and packaged terminal heat pumps are through-the-wall self-contained units that are 2 tons (24000 Btuh) or less All EER values must be rated at 95degF outdoor dry-bulb temperature

Ductless Mini-Split Heat Pump lt54 Tons Incentives are offered for Ductless Mini-Split Heat Pump lt54 Tons with SEER rating greater than or equal to 120 and EER greater than or equal to 145 and HSPF greater than or equal to 90

Geothermal Heat Pump Geothermal equipment is a high-efficiency groundwater source water source or ground source heat pump system that meets or exceeds the energy efficiency requirements shown in the tables below These measures do not apply to heat pump systems coupled with non-heat pump systems such as chillers rooftop AC units boilers or cooling towers which must be filed as custom measures All HVAC applications other than comfort cooling and heating such as process cooling must also be applied for as custom measures

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 25

HVAC Heating Qualifying Incentive

Equipment Type and Cooling Capacity Cooling Qualifying Efficiency ($ per cooling Measure Code Efficiency

ton)

Air Cooled Air Conditioner

H01 lt 54 tons (lt 65000 Btuhr) 15 SEER NA $22

H02 lt 54 and lt 11 25 tons

125 IEER $22 (lt 65 000 Btuh and lt 135 000 Btuhr) NA

H03 lt11 25 and lt 20 tons

123 IEER NA $22 (lt 135000 Btuh and lt 240000 Btuhr)

H04 lt 20 and lt 6333 tons (~

11 1 IEER NA $22 240000 Btuh and lt 760000 Btuhr)

HOS ~ 6333 Ions (~ 760000 Btuhr) 103 IEER NA $22

Air Cooled Heat Pumps

H06 lt 54 tons (lt 65000 Btuhr) 143 SEER 87 HSPF $30

H07 lt 54 and lt 11 25 tons

123 IEER 3 3 COP $30 (lt 65000 Btuh and lt 135000 Btuhr)

HOS lt11 25 and lt 20 tons

1U IEER 3 2 COP $30 (lt 135000 Btuh and lt 240000 Btuhr)

H09 lt 2000 tons (240000 Btuhr) 105 IEER 3 2 COP $30

Packaged Terminal Systems (PTAC and PTHP) (PTHP only)

H10 lt 8000 Btuhr (lt066 tons) 11 8 EER 33 $17

H11 ~8000 and lt10500 Btuhr (~066 and lt 0875 tons) 11 4 EER 32 $17

H12 gt10500 Btuhr ( 875 tons) 107 EER 31 $17

H22 lt 54 tons (lt 65000 Btuhr) 121 EER 12 3 IEER NA $22

lt 54 and lt 11 25 tons 121 EER 12 3 IEER $22 H23

(lt 65000 Btuh and lt 135000 Btuhr) NA

H24 lt11 25 and lt 20 tons

120 EER 12 2 IEER $22 (lt 135000 Btuh and lt 240000 Btuhr) NA

H25 lt20 and lt 633 tons

119 EER 12 2 IEER $22 (lt 240000 Btuh and lt 760000 Btuhr) NA

H26 ~ 633 tons( lt760000 Btuhr) 110 EER 11 1 IEER NA

$22

HVAC Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 26

Other HVAC EquipmentHotel Guest Room Occupancy Sensor Incentives are offered for occupancy-based controls that control electric air conditioning air source heat pumps and or electric heating units for individual hotel rooms Systems with nonshyelectric heat are not eligible Sensors must be controlled by automatic occupancy detectors or a key-card system and the default setting for controlled units differ by at least 5 degrees (or shut the unit fan and heating or cooling off completely) from the operating set point during unshyoccupied periods The control system may also be tied into other electric loads such as lighting and plug loads to shut them off when occupancy is not sensed The incentive is per room Replacement or upgrades of existing occupancy-based controls are not eligible as a prescriptive incentive

Economizer Integrated Dual Enthalpy Economizer ControlsThis measure is targeted to non-residential establishments whose HVAC equipment is not equipped with a functional economizer

Circulation Fan High-Volume Low-SpeedFans must be greater than 16 feet in diameter and have variable speed control

ECM Circulation Fan This measure is targeted to non-residential customers whose air handling equipment currently uses a SP or PSC fan motor rather than an ECM This measure applies only to circulating fan motors of 1 HP or less Above 1 HP motors are governed by NEMA standards and would see little to no efficiency benefit by adding an ECM The targeted fan can supply heating or cooling only or both heating and cooling

ECM Circulation Pump This measure is targeted for replacement of a shaded pole or permanent split capacitor pump or motor with an electronically commutated pump or motor le75 HP

Retrocomissioning Cooling Systems Confined to chiller plant andor isolated packaged units For reservation must contain proposal with defined scope at equipment level that demonstrates energy savings For final approval required final commissioning report including raw data (TAB reports) demonstrating actual scope

This prescriptive measure can be used for facilities with maximum cooling demand less than 1687 tons Larger systems require the use of custom HVAC measure

Retrocomissioning Whole Building Covers all relevant major mechanical systems such as chiller plant air side systems compressed air andor process systems For reservation must contain proposal with defined scope at equipment level that demonstrates energy savings For final approval required final commissioning report including raw data (TAB reports) demonstrating actual scope

This prescriptive measure can be used for facilities less than 404858 square feet Larger facilities require the use of custom HVAC measure

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 27

Energy Management System For installing a web-based building automation system in existing buildings that currently have no digital automated HVAC controls or have outdated pneumatic control systems with inoperable time control functions Existing HVAC control systems must not have time-of-day scheduling Upgrading obsolete EMS HVAC system with inoperable time clock functions will be reviewed on a case-by-case basis for incentive eligibility This incentive cannot be combined with incentives for programmable thermostats or setback-setup controls Must include the controls strategy and a scaled floor-plan with controlled areas highlighted HVAC BAS systems must be new and include bull Central time clock control bull Web-based interface with PC-based controls and graphic bull Building performance Tracking bull Open-protocol architecture controls system shall consist of either LonTalk (ANSICEA 7091) or BACNet (ASHRAE ANSI 135) protocol being used between all controlled and controlling devices and every node on the network bull Minimum setback period must exceed 2200 hours per year bull A minimum setback space temperature of at least 10degF when heating and 5degF when cooling bull Ability to adjust schedules and settings remotely over the internet bull Report generation describing energy and operating trends

This prescriptive measure can be used for facilities with maximum cooling demand less than 456 tons Larger systems require the use of custom HVAC measure

Demand Controlled Ventilation New ventilation controls must use carbon dioxide levels to measure occupancy and modify the percentage of outside air based on occupancy levels Only buildings with space heating and cooling requirements are eligible Conditioned spaces must be kept between 65ordmF and 75ordmF during occupied operating hours Carbon dioxide sensors must be installed in conjunction with fully functioning motor operated outside air dampers Dual temperature air-side economizers with zone-level CO2 sensors for rooftop units are eligible

This prescriptive measure can be used for facilities with maximum cooling demand less than 2210 tons Larger systems require the use of custom HVAC measure

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 28

Other HVAC Measures- consult project manual for eligibility specifications HVAC

Measure Incentive Unit Quantity Incentive

Measure Code er Unit

H1 8 Hotel Guest Room Occupancy Sensor Room $20

H1 9 Economizer Integrated Dual Enthalpy Economizer Controls Ton $1 5

H20 Circulation Fan High-Volume Low-Speed Unit $30

H21 ECM Circulation Fan Fan $1 5

H27 ECM Circulation Pump Pump $50

H28 Retrocommissioning Cooling Systems

Ton $750

H29 Retrocommissioning Whole Buidling

Square Foot $010

H29 Energy Management System Ton $2500

H30 Demand Controlled Ventilation Ton $2500

Other HVAC Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 29

Unitary HVAC Chillers

Air-Cooled Chillers Water Cooled Positive Displacement Reciprocating Chillers and Water Cooled Centrifugal Chillers Chiller applications including existing multiple chiller configurations (including redundant or lsquostand-byrsquo chillers) existing chillers serving multiple load groups and chillers in industrial applications are defined as non-standard applications and must follow a site-specific custom protocol $005kWh) rate

Incentives are offered for chillers with an IPLV value (expressed in kW per ton) that is less than or equal to the qualifying efficiency shown in the table below The chiller efficiency rating must be based on ARI Standard 550590-2003 for IPLV conditions The chillers must meet ARI standards 550590-2003 be UL listed and use a minimum ozone-depleting refrigerant (eg HCFC or HFC) The ARI net capacity value should be used to determine the chiller tons A manufacturerrsquos specification sheet with the rated kWton-IPLV or COP-IPLV must accompany the application along with the four point performance data that is the basis for the IPLV The application must include a certification that the chiller is appropriately sized for site design load conditions

Chillers must satisfy efficiency requirements for both full load and IPLV efficiencies for either Path A or Path B The table shows the minimum efficiency ratings to qualify for the prescriptive incentive which must be consistent with the expected operating conditions of the efficient chiller For example if the efficient chiller satisfies Path A and generally performs at part load the appropriate baseline chiller efficiency is the IPLV value under Path A If the efficient chiller satisfies Path B and generally performs at full load the appropriate baseline chiller efficiency is the full load value under Path B Generally chillers operating above 70 percent load for a majority (50 or more) of operating hours should use Path A and chillers below 70 load for the majority of operating hours should use Path B

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 30

C3 lt 75 tons

C4 75 tons and lt 150 tons

cs ~ 150 tons and lt 300 tons C6 ~ 300 tons

Water Cooled Centrifugal Chillers C7 lt 300 tons CB ~ 300 tons and lt 600 tons

C9 ~ 600 tons

Path A

Qualifying Full Load Efficiency

Qualifying IPLV Efficiency

Path B

Qualifying Full Load Efficiency

Qualifying IPLV Efficiency

0780 kWton 0567 kWton 0800 kWton 0540 kWton

0775 kWton 0554 kWton 0790 kWton 0527 kWton

0680 kWton 0522 kWton 0718 kWton 0486 kWton 0620 kWton 0486 kWton 0639 kWton 0441 kWton

0634 kWton 0536 kWton 0639 kWton 0405 kWton 0576 kWton 0494 kWton 0600 kWton 0360 kWton

0570 kWton 0494 kWton 0590 kWton 0360 kWton

I

Incentive ($ton)

$17

$17

Unitary Chiller Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 31

Refrigeration

Anti-Sweat Heater Controls Incentives are offered for devices that sense the relative humidity in the air outside of the display case and cycles or turns off the glass door (if applicable) and frame anti-sweat heaters when the ambient dew point is below a preset set point Technologies that can turn off anti-sweat heaters based on sensing condensation (on the inner glass pane) also qualify Incentive is based on the number of doors

Evaporator Fan Controls This measure is for the installation of controls in medium temperature walk-in coolers The controller reduces airflow of the evaporator fans when there is no refrigerant flow The measure must control a minimum of 120 HP where fans operate continuously at full speed The measure also must reduce fan motor power by at least 75 during the off cycle This measure is not applicable if any of the following conditions apply 1) Compressor runs all the time with high duty cycle 2) Evaporator fan does not run at full speed all the time 3) Evaporator fan motor runs on poly-phase power 4) Evaporator fan motor is not shaded-pole or permanent split capacitor (PSC) 5) Evaporator fan does not use off-cycle or time-off defrost

Floating Head Pressure Controls Controls must vary head pressure to adjust condensing temperatures in relation to outdoor air temperature Must replace existing constant pressure or manually controlled systems to achieve reduced head pressure in order to maintain a minimum saturated condensing temperature of 70 degF or a 20 degF variance below design heat pressure during mild weather conditions Compressor size must be at least 5 HP

Automatic Door Closers for Walk-In Coolers and Freezers The auto-closer should be applied to the main insulated opaque door(s) of a walk-in cooler or freezer The auto-closer must be able to firmly close that door when it is within one inch of full closure This must be a newly installed automatic door closer replacements on previously installed door closers are not eligible for an incentive

EC Motor for Walk-inReach-in Refrigerated cases or Freezer cases Incentives are offered for replacement of an existing standard-efficiency shaded-pole or permanent split capacitor evaporator fan motor in refrigerated display cases or fan coil in walk-ins The replacement unit must be an Electronically Commutated Motor (ECM) This measure cannot be used in conjunction with the Evaporator Fan Controller measure

ENERGY STAR Solid Door Freezer and Glass Door Freezer and Refrigerators Incentives are offered for replacement of existing self-contained refrigerators and freezers with units that are ENERGY STARreg listed Only units with built-in refrigeration systems are qualified Units with remote refrigeration systems or units do not qualify Customers must provide proof that the appliance meets the CEE or ENERGY STAR efficiency specifications using ASHRAE Standard 72-2005 (38degF plusmn 2degF) Incentive is per unit

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 32

Refrigeration Suction Pipe Insulation 1 Must insulate bare refrigeration suction lines of 1 58 inches in diameter or less on existing equipment only 2 Cooler lines require frac34 inch of flexible closed-cell nitrite rubber or an equivalent insulation 3 Freezer lines require 1-inch of flexible closed-cell nitrite rubber or an equivalent insulation 4 Insulation exposed to the outdoors must be protected from the weather (ie jacketed with a medium-gauge aluminum jacket)

Night Cover 1 Must install a cover on an existing open refrigerated display case to decrease its cooling load during off hours 2 The equipment manufacturer must not object to the use of night covers for the existing display case model 3 This rebate is based on the linear footage of the installed 4 The cover must be applied for a period of at least six hours

Strip Curtain on Walk-In CoolerFreezer 1 New strip curtains or plastic swinging doors must be installed on doorways of refrigerated spaces (conditioned to less than 50deg F) 2 Rebate is based on the linear footage of the doorway that the strip curtains are being installed in 3 Opening between the strip curtain and bottom of doorway must be no larger than 1 inch 4 Strips must have an overlay greater than 1 inch

Evaporator Coil Defrost Control 1The current system must include an operating electric defrost system with a functional electroshymechanical time clock 2 Evaporator coil temperature and pressure must be monitored by controller in order to determine optimal defrost cycles 3 New intelligent control systems to control the defrost systems will typically replace timed- defrost controls

Variable Speed Refrigeration Compressor This measure VSD control for refrigeration systems and its eligibility targets applies to retrofit construction in the commercial and industrial building sectors it is most applicable to grocery stores or food processing applications with refrigeration systems This protocol is for a VSD control system replacing a slide valve control system

Add Doors to Open Refrigerated Cases The eligible retrofit equipment is either no sweat doors or doors with anti-sweat heaters If a lighting retrofit is included with the new doors it must consume the same amount of energy or less energy than the old lighting Upgrades to lighting or other system components should be processed separately Horizontal cases are not eligible and should be processed as custom

Door Gaskets PECO Smart Ideas For Your Business CampI Program Application Manual

Q1 2017 pg 33

This measure is applicable to commercial refrigeration and applies to the replacement of worn-out gaskets with new better-fitting gaskets Applicable gaskets include those located on the doors of walk-in andor reach-in coolers and freezers This protocol applies to the main doors of both low temperature (ldquofreezerrdquo ndash below 32 degF) and medium temperature (ldquocoolerrdquo ndash above 32 degF) walk-ins

Zero Energy Doors For this measure a no-heatlow-heat clear glass door must be installed on an upright display case It is limited to door heights of 57 inches or more Doors must have either heat reflective treated glass be gas filled or both This measure applies to low temperature cases onlymdashthose with a case temperature below 0degF Doors must have 3 or more panes Total door rail glass and frame heater amperage ( 120 volt) cannot exceed 039413 amps per door for low temperature display cases Rebate is based on the door width (not including case frame)

Air Cooled Refrigeration Condenser Approach temperature lt8F for low temperature loads lt13F for medium temperature loads

Oversized Condenser with VFD New standalone condenser must no more than 150 larger than load

Case Light Occupancy Controls Acceptable for freezer or refrigerated cases as well as open cases or cases with doors

LED Open Case Lighting For replacing open case T8 or T12 fluorescent fixtures with DLC listed LEDs on refrigerators coolers and freezers

LED Enclosed Case Lighting Refrigerated LED case lighting with or without motion sensors on enclosed refrigerated vertical displays The baseline equipment is assumed to be cases with uncontrolled T8 or T12 linear fluorescent lamps

LED Enclosed Case Lighting Freezer LED case lighting with or without motion sensors on enclosed freezer vertical displays The baseline equipment is assumed to be cases with uncontrolled T8 or T12 linear fluorescent lamps

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 34

Refrigeration Measures Ref Measure

Measure Incentive Unit IncentiveUnit Code R01 Anti-Sweat Heater Controls Door $30

R02 Evaporator Fan Controls Controller $50

R03 Floating-head Pressure Controls HP $20

R04 Automatic Door Closers fo r Walk-in Coolers Door $75

R05 Automatic Door Closers fo r Walk-in Freezers Door $75

R06 Evaporator Fan EC Motor fo r Reach- in Cases Motor $35

RO Evaporator Fan EC Motor fo r Walk-in Cases Motor $50

R08 ENERGY STARreg Glass Door Freezer lt15 Cu Ft Unit $100

R09 ENERGY STARreg Glass Door Freezer 15- 49 Cu Ft Unit $125

R10 ENERGY STARreg Glass Door Freezer ~ 50 Cu Ft Unit $145

R11 ENERGY STARreg Solid Door Freezer Unit $75

R12 ENERGY STARreg Glass Door Refrigerator lt50 Cu Ft Unit $30

R13 ENERGY STARreg Glass Door Refrigerator gt= 50 Cu Ft Unit $50

K14 t NtKGY ~ I AKreg ~Olld Uoor Ketngerator $ OU Cu t-t Unit $~0

R15 Suction Pipe Insulation Walk-in Coolers Linear Foot $050

R16 Suction Pipe Insulation Walk in Freezers Linear Foot $075

R17 Night Cover Linear Foot $800

R18 Strip Curtains on Walk-in Cooler Linear Foot $250

R19 Evaporator Coil Defrost Control Controller $7500

R20 Variable Speed Refrigeration Compressor Compressor $85

R21 Add Doors to Open Refrigerated Cases Door $55

R22 Door Gaskets Door $250

R23 Zero Energy Doors Door $50

R24 A ir Cooled Refrigeration Condenser Ton $10

R25 Oversized Condenser with VFD Ton $10

R26 Case Light Occupancy Controls Door $8

R27 LED Open Cose Lighting Cose $10

R28 LED Enclosed Case Lighting Refrigerated Door $30

R30 LED Enclosed Case Lighting Freezer Door $30

Refrigeration Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 35

Food Service Beverage and Snack Machine Controls Incentives are offered for refrigerated vending machines that contain non-perishable bottled and canned beverages Controller for both types of systems must include a passive infrared occupancy sensor to turn off fluorescent lights and other energized machine systems when the surrounding area is unoccupied for 15 minutes or longer For the refrigerated machines the control logic may include periodic power up at 2-hour intervals or longer to maintain product temperature and provide compressor protection

ENERGY STARreg Refrigerated Beverage Vending Machines Incentives are offered for ENERGY STARreg beverage vending machines Qualifying machines can be found at httpswwwenergystargovproductsothervending_machines

ENERGY STARreg Electric Steam Cooker This measure applies to the installation of electric ENERGY STAR steam cookers as either a new item or replacement for an existing unit Gas steam cookers are not eligible The steam cookers must meet minimum ENERGY STAR efficiency requirements A qualifying steam cooker must meet a minimum cooking efficiency of 50 percent and meet idle energy rates specified by pan capacity

ENERGY STARreg Electric Combination Oven This measure applies to electric ovens capable of handling single 12 x 20 x 25 pan per rack

ENERGY STARreg Commercial Convection Oven The oven must meet or exceed heavy load potato cooking energy efficiency of greater than 70 utilizing ASTM Standard F149 Applies only to electric ovens

ENERGY STARreg Commercial Fryers The commercial fryer must have a tested heavy load (French fry for large vats) cooking energy efficiency of greater than 80 utilizing American Society for Testing and Materials (ASTM) Standard F1361 for commercial fryers and ASTM Standard F2144 for large vat fryers Multiple vat configurations are paid per qualifying vat ENERGY STAR maintains a list of qualifying products and specifications at httpwwwenergystargov

ENERGY STARreg Commercial Hot Holding Cabinet Energy STAR rating electric

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 36

Food Service amp Other Measures FoodOther

Measure Incentive Unit Incentive

Measure Code Unit

F01 Beverage Machine Controls Unit $25

F02 Snack Machine Controls Unit $20

F03 ENERGY STARreg Refrigerated Beverage Vending Machir Unit $125

F04 ENERGY STARreg Commerc ial Steam Cooker Unit $200

F05 ENERGY STARreg Electric Combination Oven Unit $200

F06 ENERGY STARreg Commercial Electric Convection Oven Unit $150

F07 ENERGY STARreg Commerc ial Fryers Unit $100

F08 ENERGY STARregCommerc ial Hot Holding Cabinet Unit $200

Food Service Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 37

Motors and Variable Frequency DrivesEarly Replacement Motors For constant speed and uniformly loaded motors this measure applies to the replacement of old motors with new energy efficient motors of the same rated horsepower Old motors must be less than 15 years Replacements where the old motor and new motor have different horsepower ratings are considered custom measures Motors with variable speeds variable loading or industrial-specific applications are also considered custom measures

Motors Incentive Table Motors

Measure Code

HP Incentive per Motor

M01 15 - 10 $40 M02 11 - 50 $100 M03 51-100 $150 M04 gt100 $300

Only VFDs on unitary systems are eligible Non-unitary systems must be submitted as a custom measure Soft start motors are not eligible

Variable Frequency Drives on HVAC Fan Applications Incentives are offered for installing VFDs on existing HVAC fans that do not have pre-existing VFDs This measure applies to HVAC supply and return fans only All other fans including cooling tower fans must be submitted as custom measures Manually fixed speed settings on HVAC fans must be submitted via custom application The VFD must control motor speed automatically in response to pressure flow temperature or other variable signal The installation of a VSD must accompany the permanent removal or disabling of any throttling devices such as inlet vanes bypass dampers and throttling valves etc The incentive is offered per controlled HP

Variable Frequency Drives on Pump Applications Incentives are offered for installing VFDs on existing chilled water pumps and heating hot water pumps that do not have existing VFDs This measure applies to chilled water pumps and heating hot water pumps only All other pumps must be submitted as custom measures Manually fixed speed settings on pumps must be submitted via custom application The VFD must control motor speed automatically in response to pressure flow temperature or other variable signal The installation of a VSD must accompany the permanent removal or disabling of any throttling devices such as throttling valves The incentive is offered per controlled HP

Variable Speed Control for Kitchen Exhaust Hoods The measure consists of installing a new VSD in conjunction with a sensor control system that varies the exhaust rate of kitchen ventilation (exhaust andor makeup air fans) based on the heat and effluent output from the cooking appliances (ie the more heat and smokevapors generated the more ventilation needed) This involves installing a temperature sensor in the hood exhaust collar andor an optic sensor on the end of the hood that senses cooking conditions and allows the system to automatically vary the rate of exhaust to match requirements by adjusting the fan speed accordingly

Variable Speed Drives for Process or Other Equipment VFD must be used in conjunction with a process (non HVAC) application To qualify for this incentive the driven equipment must operate at least 2000 hours per year Redundant or back- up units do not qualify VFDs replacing existing VFDs do not qualify The VFD must control motor

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 38

speed automatically in response to pressure flow temperature or other variable signal VFDs installed as ldquosoft startrdquo without automatic manual closed loop speed control do not qualify The installation of a VFD must accompany the permanent removal or disabling of any throttling devices such as throttling valves The incentive is per controlled HP and only applies to controlled motors less than 50 HP

VSDVFD Incentives Table VFD

Measure Code

Measure Unit Incentive per Unit

Fan Application

V01 VFD on HVAC Fan HP $25 Pump Application

Variable Speed Control for Kitchen Exhaust Hoods

Variable Speed Drives for Process or Other Equipment

V02 VFD on Chilled Water Pumps HP $25 V03 VFD on Heating Hot Water Pumps HP $25

V04 Kitchen Exhaust Fan Retrofit Hood HP $500

V05 Process Motor lt 50 HP HP $50

Domestic Hot Water Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater This measure documents the energy savings attributed to converting from a standard electric water heater to an ENERGY STAR natural gaspropane-fired water heater or a standard oil-fired water heater with an Energy Factor of 0585

Heat Pump Water Heater This includes heat pump water heaters with energy factors meeting ENERGY STAR criteria The measure described here involves a direct retrofit of a resistive electric water heater with a heat pump water heater It does not cover systems where the heat pump is a pre-heater or is combined with other water heating sources More complicated installations can be treated as custom projects

Low Flow Pre-Rinse Spray Valve This measure applies to efficient low flow pre-rinse sprayers in grocery and food service applications The most likely areas of application are kitchens in restaurants and hotels Only premises with electric water heating may qualify for this incentive In addition the replacement pre-rinse spray nozzle must use less than 16 gallons per minute with a cleanability performance of 26 seconds per plate or less Low flow pre-rinse sprayers reduce hot water usage and save energy associated with water heating

Domestic Hot Water Incentive Table

Measure Code Measure Unit Retrofit Incentive per

Unit

W01 Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater Unit $100

W02 Heat Pump Water Heater Unit $100 W03 Low-Flow Pre-Rinse Spray Valve Valve $17

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 39

Compressed Air SystemsNo-loss Condensate Drain No-loss Condensate Drains are controlled by a sensor that monitors the level of condensate and only open when there is a need to drain condensate They close before compressed air is allowed to escape This measure is targeted to non-residential customers whose equipment is a timed drain that operates on a pre-set schedule Acceptable baseline conditions are compressed air systems with standard condensate drains operated by a solenoid and timer

Air-Entraining air nozzle This measure is targeted to non-residential customers whose compressed air equipment uses stationary air nozzles in a production application with an open copper tube of 18rdquo or 14rdquo orifice diameter Energy efficient conditions require replacement of an inefficient non-air entraining air nozzle with an energy efficient air-entraining air nozzle that use less than 15 CFM at 100 psi for industrial applications

Storage Tanks for LoadNo Load Screw Compressors This measure protocol applies to the installation of air receivers with pressureflow controls to loadno load compressors Loadno load compressors unload when there is low demand The process of unloading is done over a period of time to avoid foaming of the lubrication oil Using a storage tank with pressureflow control will buffer the air demands on the compressor Reducing the number of cycles in turn reduces the number of transition times from load to no load and saves energy The baseline equipment is a loadno load compressor with a 1 galcfm storage ratio or a modulating compressor with blowdown The high efficiency equipment is a loadno load compressor with a minimum storage ratio of 4 gallons of storage per cfm

Cycling Refrigerated Thermal Mass Dryer When air is compressed water vapor in the air condenses and collects in liquid form Some of this condensate collects in the air distribution system and can contaminate downstream components such as air tools with rust oil and pipe debris Refrigerated air dryers remove the water vapor by cooling the air to its dew point and separating the condensate Changes in production and seasonal variations in ambient air temperature lead to partial loading conditions on the dryer Standard air dryers use a hot gas bypass system that is inefficient at partial loads A Cycling Thermal Mass Dryer uses a thermal storage medium to store cooling capacity when the system is operated at partial loads allowing the dryer refrigerant compressor to cycle

This measure is targeted to non-residential customers whose equipment is a non-cycling refrigerated air dryer with a capacity of 600 cfm or below Acceptable baseline conditions are a non-cycling (eg continuous) air dryer with a capacity of 600 cfm or below The replacement of desiccant deliquescent heat-of-compression membrane or other types of dryers does not qualify under this measure

Variable Speed Air Compressor This type of compressor uses a special drive to control the speed (RPM) of the unit which in turn saves energy compared to a fixed speed equivalent

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 40

No-loss Condensate Drain Air-Entraining Air Nozzle Cycling Refrigerated Thermal Mass Dryer

Compressor Incentive per

Equipment Type Units Quantity Daily Operating Unit

Hours

CA04 Storage Tanks for LoadNo Load Screw

Compressor HP $10 Compressors

CA05 Variable Speed Air Compressor

Compressor HP $30

CA06 Compressed Air System Optimization

Compressor HP $50

Compressed Air System Optimization The submitted optimization measures must be identified in an Air System Audit or equivalent study to be eligible The measures must demonstrate energy savings as evaluated by a Program Engineer Additionally measures must also fall under one or more of the category below to be eligible

1) Install storage Receivers (new receivers only replacing existing storage receivers are ineligible)

2) Compressor control (must demonstrate improvement in partial load efficiency of the compress air system including reduceeliminate partially loaded units)

3) Dryer control 4) Source pressure reduction 5) Right-sizing distribution components such as piping filters regulators

connectors and hoses (routine maintenance replacements are ineligible) 6) Leakage detection and repair 7) Eliminate low-efficiency end-usages of compressed air 8) Heat recovery (most reduce electricity consumption of the replaced heat source)

Compressed Air Systems Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 41

lt65000 Btuh

~ 65000 Btuh and lt135000 Btuh

135000 Btuhand lt240000 Btuh

240000 Btuh and lt760000 Btuh

760000 Btuh

154

142

135

125

123

Chiller Capacity Path APath B efficiency (kWton )

lt 150 tons

~150 tons and lt300 tons

300 tons and lt400 tons

400 tons and lt600 tons

600 tons

lt75 tons

~75 tons and lt150 tons

~150 tons and lt300 tons

~300 tons and lt600 tons

600 tons

0610 FU0695 FL and 0550 IPLV0440 IPLV

0610 FU0635 FL and 0550 IPLV0400 IPLV

0560 FU0595 FL and 0520 IPLV0390 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

Path APath B efficiency (kWton )

0750 FU0780 FL and 0600 IPLV0500 IPLV

0720 FU0750 FL and 0560 IPLV0490 IPLV

0660 FU0680 FL and 0540 IPLV0440 IPLV

0610 FU0625 FL and 0520 IPLV0410 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

Data Centers Data Center incentives are available for facilities ranging in size from office server closets to large standalone facilities

Air Cooled Chiller Path APath B EER (BtuWh) lt150 tons 101 FL97 FL and 137 IPLV158 IPLV ge150 tons 101 FL97 FL and 140 IPLV161 IPLV

Air Cooled Chiller without Condenser Air-cooled chillers without condenser must be rated with matching condensers and comply with air-cooled chiller efficiency requirements

Computer Room Air Conditioner

Computer Room Air Handler Variable Speed Replacing constant speed CRAH with VSD CRAH

Water Cooled Centrifugal Chiller

Water Cooled Positive Displacement or Reciprocating Chiller

Uninterruptible Power Supply Must be Energy Star Certified UPS or have full load efficiency rating

ge948 for 20-100 kVA ge978for ge100 kVA

Mainframe Refresh The rated efficiency of the replacement Mainframes power supply must be at least 8 more

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 42

- Equipment Type Units IncentiveUnit

D1 Air Cooled Chiller Ton $4000 D2 Air Cooled Chiller W ithout Condenser Ton $2000 D3 Computer Room Air Conditioner Ton $3000 D4 Computer Room Air Handler Variable Speed Ton $1000 D5 Water Cooled Centrifugal Chiller Ton $3000 D6 Water Cooled Positive Displacement or Reciprocatin $3000 D7 Uninterruptible Power Supply 20-100 kVA $1000 D8 Uninterruptible Power Supply gt 100 kVA $1000 D9 Mainframe Refresh $2000

D10 Server Refresh $2000 D11 PC Power Managment System $600 D12 HVAC System Optimization $005 D1 3 HoUCold Aisle Containment kWh saved $005 D14 Server Virtualization kW reduction $40000 D1 5 Thin Clients Units $500

efficient compared to the existing Mainframes power supply The replacement Mainframe if Inactive must be decommissioned and removed from the Data Center

Server Refresh Replacement servers must be ENERGY STARreg certified Replacement servers power supply must be 5 more efficiency compared to the power supply of the replaced servers The replaced server must be decommissioned and removed from the data center

HVAC System Optimization Final system must have these features

-Implementation of free cooling by the addition of an economizer system -Conversion of constant speed CRACCRAH into variable speed operations using VFDs and additional control functionalities and -Elevation of exhaust air temperature

HotCold Aisle Containment Includes both Hot and Cold Aisles Installing new containment measures not replacing already existed aisle containment Plenum-only installations not eligible Must result in higher difference between the return air (hot aisle) and supply air (cold aisle) temperatures measured at rack intake and exhaust locations

Server Virtualization Minimum of consolidating 5 Servers virtualized into one Server The virtualized servers if inactive are removed from the Data Center

Thin Clients Must be ENERGY STAR certified thin clients Decommissioned clients are removed from the Data Center

Data Center Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 43

Whole Building Systems Whole Building Systems Approach

The Whole Building Systems approach is intended to encourage integrated energy efficient designs by providing enhanced incentives to the customer who addresses overall energy performance Owners of eligible and qualifying new construction and major renovation projects can receive Whole Building Systems incentives when energy modeling indicates the projectrsquos performance is over 10 better than the ASHRAE 901-2007 Savings from eligible electric end-uses in kilowatt hours define the amount of financial incentive Energy savings achieved through renewable energy sources are not counted toward project energy savings and are not included in the savings basis Incentive reservations obtained during the design phase of a project will be honored for up to 24 months

How to Apply for Whole Building Systems Incentives Before construction begins bull A Pre-notification Application must be submitted documenting the Owners intention to

seek Whole Building Systems incentives bull The Owner must confirm the goals and energy efficiency strategies being pursued by the

design team on the completed Pre-notification Worksheet (Checklist tab) and in the project Summary (Whole Building Performance Summary tab)

bull Submit executable building modeling software files bull Submit the Whole Building Performance Summary worksheet energy simulation model

inputs and outputs and supporting documentation bull Receive confirmation and eligibility notification from the PECO Smart Ideas team and

receive an incentive reservation bull The final incentive paid may differ from the reserved incentive amount The final

incentive will be calculated based on site-verified equipment installation and performance The Owners final application and complete documentation must be received within 6 months of equipment installation or certificate of occupancy whichever is later

bull An executable energy model and model output demonstrating compliance with the criteria of ASHRAE 901-2007 Appendix G will be required and the equipment data sheets LED lighting fixtures must be on the DLC or Energy STAR qualified products list (QPL) to be eligible LED fixtures not on the DLC or Energy STAR QPL has the option of submitting LM79 and LM80 test reports for evaluation against DLC and Energy STAR eligibility criteria

During the construction period bull Owner and design team continue to work closely with their chosen contractor to assure

energy efficiency measures are included and installed in the completed building

When the building is constructed and operational bull Complete the Owner final application Request an equipment verification site visit by the

PECO Smart Ideas team Equipment must be installed and fully operational o Program staff will schedule a site visit and utilize submitted documentation and

measurement tools to verify that the installation follows the submitted energy simulation model

bull When PECO confirms that there are no significant changes to the installed equipment payment of the reserved incentive will be made to the Owner within 6 weeks

bull If changes from the proposed design energy simulation are found the Owner and design team will be notified of the reduced incentive amount a period of 20 calendar days will

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 44

Improvement Incentive per Sq Ft

over Code

~11 to lt20 $0155

~20 to lt30 $0233

~30 to lt40 $0350

~40 to lt60 $0525

~60 $0700

be allowed for supplemental information to be provided if no additional information is received by PECO Smart Ideas team the reduced incentive payments will be made and sent to the Owner if additional clarification and information is available program staff will work diligently to resolve the discrepancies and arrive at a reasonable incentive adjustment with the customer

Payments made by PECO Smart Ideas are final

Customer Eligibility The Owner of the proposed new building project must be a customer of PECO and receive delivery of electric service from PECO to receive kilowatt-hour based incentives Please note that electricity supply can be provided by any vendor

Project Eligibility bull The project must be a new construction or major renovation Major renovations involving

the removal and redesign of at least two building systems (such as interior lighting and mechanical systems) may apply for Whole Building Systems incentives

bull To qualify for incentives projects must demonstrate energy efficiency enhancements that achieve at least 11 improvement in the proposed design versus the standard baseline

bull The Owner must submit a Pre-approval Application to the program at the stage where changes for increased energy efficiency are still feasible and construction has not been completed

bull Projects receiving Whole Building Systems incentives are not eligible to receive other incentives such as the prescriptive or custom program incentives for the same scope

bull Project components that are NOT eligible for consideration as a basis for PECO Smart Ideas include the following o Alternative fuel sources (eg use of gas or oil equipment in lieu of electric) Please note

that combined heat and power (CHP) systems will be incentivized for the electricity they produce

o Renewable energy sources (eg solar wind biomass) bull Ineligible savings include exterior lighting process receptacle miscellaneous loads and

other unregulated end-uses Custom incentives are available for new construction exterior lighting

Whole Building Systems Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 45

Custom Project Specifications Instructions for Energy Savings Calculations for Custom Projects Custom projects must involve measures that result in a reduction in electric energy use (kWh) Electricity savings may result from either efficiency improvements or fuel switching Custom Incentives are based on the first year kilowatt-hour savings Custom applications must be accompanied by detailed engineering calculations that document the annual total energy savings

The following serve as guidelines for the minimum required documentation

Equipment Information Submittals bull A list of the present and proposed equipment and components to be installed

including manufacturerrsquos catalogmodel number bull Manufacturerrsquos specification sheets showing capacities and performance for all major

components

Energy Savings Calculations Provide calculations documenting the predicted energy consumption of the existing (or baseline) and proposed system using appropriate analytical tools and clearly stated assumptions Calculations may be performed by ldquohandrdquo but spreadsheet analysis or more rigorous modeling is preferred All analysis should be provided in electronic format All assumptions such as operating hours existing and proposed equipment operational details must be presented Engineering algorithms and procedures from recognized technical organizations such as ASHRAE SMACNA ANSI etc must be used Use rated performance factors tested under accepted procedures specified by recognized rating agencies such as AHRI ANSI ASTM etc Provide an explanation when equipment performance rating conditions vary from standard conditions

In support of the calculations extensive documentation must be provided that provides the basis for the savings estimates The documentation must provide information on the equipment operating schedule daily and seasonal load profile and baseline AND energy efficient equipment performance at the operating loads Typical documentation for custom projects often includes bull Engineering or architectural drawings and ldquoequipment schedulerdquo sheets bull Component specification sheets that include part load efficiency or performance

factors bull Spreadsheet calculations or inputoutput files and results from system modeling or

other engineering analysis using accepted engineering algorithms and practices bull Log sheets trend logs from a building management system or other operating

documentation that are often necessary to document operating hours and equipment loading and used as a basis for the calculations (in some cases short term monitoring may be required to document the load profile)

bull Control sequence of operations that are necessary where controls play a part in the savings equation

Additional documentation other than that described in the application may be required for program participation Larger projects may also require pre- and post-project sub metering or monitoring of loads andor power input as part of another measurement and verification activity to demonstrate the actual energy savings that are realized

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 46

Baseline for Custom Analysis Where equipment is replaced prior to the end of its rated service life in order to achieve energy savings the existing equipment performance may be used as the baseline in the energy savings calculations Where equipment is replaced due to failure or for other reasons (such as obsolescence or a need for more capacity) the baseline performance used in the savings calculation should be either the minimum performance that would be required by code for that equipment type and application (where a code applies) or the performance of the equipment that would have been selected as the customers standard practice when a code does not apply

Baseline or Existing System Summary On custom worksheet on application form include make model number name plate information (such as operating voltage and rated full load amps) rated capacity quantities equipment condition and age facility operating hours equipment operating schedule and load curves If needed attach separate sheets

All decisions regarding incentives for custom projects are in the sole discretion of PECO

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 47

APPENDIX PROGRAM UPDATES SUMMARY (Q1 2017) Multifamily Nursing Home and Assisted Living retrofit customers need to apply for incentives through the PECO Smart Ideas Multi-Family Program administered by Franklin Energy For more information please contact Taylor Adler at tadlerfranklinenergycom or call 1-844-4BIZ-SAVE Multifamily Nursing Home and Assisted Living new construction customers can proceed with applying for incentives here

Revised Incentives

Data Centers

Measure Incentive Effective Immediately Previous Incentive

Air-cooled chiller for data centers $40ton $10ton Air-cooled chiller without condenser for data centers $20ton $10ton

Computer room air conditioner $30ton $7ton Water-cooled centrifugal chiller for data centers $30ton $5ton Water-cooled positive displacement or reciprocating chiller for data centers

$30ton $5ton

Uninterruptible power supply 20-100 kVA $10kVA $6kVA Uninterruptible power supply gt100 kVA $10kVA $1kVA Mainframe refresh $20kW installed $5kW installed Server refresh $20kW installed $4kW installed Server virtualization $400kW reduction $4kW reduction Thin clients $5units $4units

Lighting (Effective Immediately)

Measure Incentive Effective Immediately Specification Previous

Incentive Specification

New construction exterior LED outdoor flood light LED parking garage and canopy lighting LED polearm mounted parking and roadway lighting LED wall mount fixture

$005kWh (custom)

Lighting Power Density (LPD) Requirements Unchanged

$10-54 fixture

Lighting Power Density (LPD) (Wft2) by Space Type or Building Area

LED Replacement Lamps (Tubes) 2

$250lamp 5 Min Watts Reduced

$250lamp 6 Min Watts Reduced

LED Replacement Lamps (Tubes) 4

$400lamp 10 Min Watts Reduced

$400lamp 12 Min Watts Reduced

Permanent Fixture Removal $010Watt removed

Clarification of calculation to represent actual Wattage removed

$010Watt removed

Lighting (Effective 6117)

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 48

Measure Incentive Effective 6117 Specification Previous

Incentive Previous Specification

Interior LED high-bay fixtures andor retrofit kits if lt 20000 LED Lumens

$50fixture 150 Min Watts Reduced

$75fixture 150 Min Watts Reduced

Interior LED high-bay fixtures andor retrofit kits if gt 20000 LED Lumens

$75fixture 225 Min Watts Reduced

$75fixture 150 Min Watts Reduced

New Incentives

Compressed Air

Measure New Incentive Effective Immediately Variable speed air compressor $30compressor HP Compressed air system optimization $50compressor HP

HVAC

Measure New Incentive Effective Immediately ECM circulation pump $50pump Retro-commissioning cooling systems $750ton Retro-commissioning whole building $010square foot Energy management system $25ton Demand controlled ventilation $25ton Water-cooled air conditioner $22ton

Food Service

Measure New Incentive Effective Immediately Combination oven $200unit ENERGY STARreg commercial convection oven $150unit ENERGY STARreg commercial fryers $100unit ENERGY STARreg commercial hot holding cabinet $200unit

Refrigeration

Measure New Incentive Effective Immediately Air-cooled refrigeration condenser $10ton Oversized condenser with VFD $10ton Case light occupancy controls $750door

Lighting

Measure New Incentive Effective Immediately Interior central lighting controls $00175sq foot

Motors and Drives

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 49

-

Measure New Incentive Effective Immediately VFD for dust collection system motor $50HP

Application Clarifications and Revised Requirements

Clarification of LED Eligibility for New Construction or Retrofit Projects

LED Eligibility is determined by whether lighting products are listed in either the DesignLights Consortium (DLC) Qualified Products List of commercial-grade LED luminaires or the US Environmental Protection Agency database of ENERGY STAR certified products For products not yet listed contractors may submit LM79 and LM80 test reports PECO Smart Ideas engineers will review test reports to determine if the product in question meets performance specifications

Revised W 9 Requirement

W-9 forms EIN numbers are no longer required

Deletion of erroneous statement in New Construction Lighting

The following statement from previous Business Manual has been deleted ldquoThe minimum lighting power density used to calculate the incentive shall be no lower than 50 of the ASHRAE 901-2007 valuerdquo

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 50

  • Commercial amp Industrial Program Application Manual
    • Follow This Easy Process
      • Pre-Approval Application Checklist
      • Final Application Checklist
          • Terms and Conditions
            • Program Effective Dates
            • Program and Project Eligibility
            • Incentive Payment Limits
            • Application Review Process
            • Inspections andor PUCrsquos Statewide Program Evaluation
            • Requirements for Custom Project Electricity Savings Calculation
            • Tax Liability
            • No Endorsement
            • Warranties
            • Limitation of Liability
            • Assignment
            • Customerrsquos Certification
            • Termination
            • Acknowledgement
              • Retrofit Lighting Solutions
                • General Linear Fluorescent Lamp and Ballast Specification Requirements
                • LED Lamps and Fixtures
                • Minimum Watts Reduced
                • Linear LED (Tubes)
                • Permanent Fixture Removal
                  • LED Traffic Signals
                    • LED Traffic Signals Incentive Table
                      • New Construction Lighting Specifications
                        • New Construction Lighting Incentives Table
                          • New Construction Lighting Power Density Code
                              • Exterior New Construction Lighting
                              • HVAC Equipment
                                • Air-Source Air Conditioners and Air-Source Heat Pumps
                                • Package Terminal Systems (Replacements)
                                • Ductless Mini-Split Heat Pump lt54 Tons
                                • Geothermal Heat Pump
                                  • Other HVAC Equipment
                                    • Hotel Guest Room Occupancy Sensor
                                    • ECM Circulation Fan
                                    • ECM Circulation Pump
                                    • Retrocomissioning Cooling Systems
                                    • Retrocomissioning Whole Building
                                    • Energy Management System
                                    • Demand Controlled Ventilation
                                    • Other HVAC Incentives Table
                                      • Unitary HVAC Chillers
                                        • Air-Cooled Chillers Water Cooled Positive Displacement Reciprocating Chillers and Water Cooled Centrifugal Chillers
                                          • Refrigeration
                                            • Anti-Sweat Heater Controls
                                            • Evaporator Fan Controls
                                            • Floating Head Pressure Controls
                                            • Automatic Door Closers for Walk-In Coolers and Freezers
                                            • EC Motor for Walk-inReach-in Refrigerated cases or Freezer cases
                                            • ENERGY STAR Solid Door Freezer and Glass Door Freezer and Refrigerators
                                            • Refrigeration Suction Pipe Insulation
                                            • Night Cover
                                            • Strip Curtain on Walk-In CoolerFreezer
                                            • Evaporator Coil Defrost Control
                                            • Variable Speed Refrigeration Compressor
                                            • Add Doors to Open Refrigerated Cases
                                            • Door Gaskets
                                            • Zero Energy Doors
                                            • Air Cooled Refrigeration Condenser
                                            • Oversized Condenser with VFD
                                            • Case Light Occupancy Controls
                                            • LED Open Case Lighting
                                            • LED Enclosed Case Lighting Refrigerated
                                            • LED Enclosed Case Lighting Freezer
                                              • Food Service
                                                • Beverage and Snack Machine Controls
                                                • ENERGY STARreg Refrigerated Beverage Vending Machines
                                                • ENERGY STARreg Electric Steam Cooker
                                                • ENERGY STARreg Electric Combination Oven
                                                • ENERGY STARreg Commercial Convection Oven
                                                • ENERGY STARreg Commercial Fryers
                                                • ENERGY STARreg Commercial Hot Holding Cabinet
                                                  • Motors and Variable Frequency Drives
                                                    • Early Replacement Motors
                                                    • Variable Frequency Drives on HVAC Fan Applications
                                                    • Variable Frequency Drives on Pump Applications
                                                    • Variable Speed Control for Kitchen Exhaust Hoods
                                                    • Variable Speed Drives for Process or Other Equipment
                                                      • Domestic Hot Water
                                                        • Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater
                                                        • Heat Pump Water Heater
                                                        • Low Flow Pre-Rinse Spray Valve
                                                        • Domestic Hot Water Incentive Table
                                                          • Compressed Air Systems
                                                            • No-loss Condensate Drain
                                                            • Air-Entraining air nozzle
                                                            • Storage Tanks for LoadNo Load Screw Compressors
                                                            • Cycling Refrigerated Thermal Mass Dryer
                                                            • Variable Speed Air Compressor
                                                            • Compressed Air System Optimization
                                                            • Compressed Air Systems Incentive Table
                                                              • Data Centers
                                                                • Air Cooled Chiller
                                                                • Air Cooled Chiller without Condenser
                                                                • Computer Room Air Conditioner
                                                                • Computer Room Air Handler Variable Speed
                                                                  • Replacing constant speed CRAH with VSD CRAH
                                                                    • Water Cooled Centrifugal Chiller
                                                                    • Water Cooled Positive Displacement or Reciprocating Chiller
                                                                    • Uninterruptible Power Supply
                                                                    • Mainframe Refresh
                                                                    • Server Refresh
                                                                      • Whole Building Systems
                                                                        • Whole Building Systems Approach
                                                                        • How to Apply for Whole Building Systems Incentives
                                                                        • Customer Eligibility
                                                                        • Project Eligibility
                                                                        • Whole Building Systems Incentives Table
                                                                          • Custom Project Specifications
                                                                            • Instructions for Energy Savings Calculations for Custom Projects
                                                                            • Equipment Information Submittals
                                                                            • Energy Savings Calculations
                                                                            • Baseline for Custom Analysis
                                                                            • Baseline or Existing System Summary

LED Traffic SignalsThis measure applies to the early replacement of existing incandescent traffic lights and pedestrian signals with LEDs New LED traffic signals must comply with ENERGY STAR requirements which can be found at httpswwwenergystargoviapartnersproduct_specseligibilitytraffic_eligpdf98bfshy1786

LED Traffic Signals Incentive Table

Round Traffic Signals 8 Red

Incentive per Signal

$15

8 Yellow 8 Green 12 Red

12 Yellow 12 Green

Turn Arrow Signals

8 Red

$13

8 Yellow 8 Green 12 Red

12 Yellow 12 Green

Pedestrian Signals

9 Pedestrian Only

$13

12 Hand Only 12 Pedestrian Only 12 Countdown Only

12 Pedestrian and Hand Overlay 16 Pedestrian and Hand Side by

Side 16 Pedestrian and Hand Overlay

16 Hand and Countdown Side-by-Side

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 19

Lighting Controls that Exceed Code Requirements

New Construction Lighting SpecificationsUnder the Lighting Power Density Approach the lighting power installed is compared with the lighting power allowed by code Incentives are available for systems where the installed lighting power is lower than the code-allowed power by at least 10 Savings are based on the Lighting Power Density (LPD) calculated on a watts per square foot basis Incentives will be paid only on the area of the building where the lighting installation is complete and is ready for occupancy If a portion of a building is not built-out such that the lighting in an area is not complete and ready for occupancy then that portion is not eligible for an incentive Baseline lighting power density is based on ASHRAE 901- 2007 Either the Space-by-Space or Building Area method may be used to calculate the LPD for the purposes of the incentive

Required Documentation bull Lighting Worksheet bull COMcheck Interior Lighting Report or equivalent analysis demonstrating space-byshy

space or building area calculations bull Reflected ceiling plans and electrical plan sheets showing lighting fixture layout bull Lighting fixture schedule sheet including fixture counts bull Fixture submittal or specification sheets showing model number and rated fixture wattage bull Architectural floor plans displaying floor area affected by proposed lighting installation

New Construction Lighting Incentives Table Lighting Wattssq ft

Improvement over of Code Incentive

gt= 10 and lt 20 $0035sq gt= 20 and lt 30 $007sq ft gt= 30 and lt 40 $0105sq

gt= 40 $021 sq ft

Incentives will be paid on a ($005kWh) custom basis Please contact Program Staff for eligibility of lighting controls for New Construction projects

Interior Occupancy Sensors Incentives are offered for occupancy-based controls in areas where they are not required by code Passive infrared ultrasonic detectors and fixture-integrated sensors or sensors with a combination sensor are eligible All sensors must be hard-wired and control interior lighting fixtures The incentive is per Watt controlled An inventory of the controlled fixtures and their wattage must be provided for each sensor with the Final Application

Daylight Dimming System Incentives are offered for daylight sensor controls in spaces with suitable available ambient light for at least part of the day Light may be through skylights clerestories windows or ldquolight tubesrdquo The controls can be onoff stepped or continuous dimming The onoff controller should turn off artificial lighting when the interior illuminance meets the desired indoor lighting level The stepped controller generally dims the artificial lighting 50 when the interior illuminance levels reach 50 of the desired lighting levels Continuous or dimming controllers dim artificial lighting proportionally to the available ambient light All types of daylight sensor controls are required to be commissioned in order to ensure proper sensor calibration and energy savings

Required Documentation bull Cut sheets or submittals of lighting control systems Reflected ceiling plans or schedule

showing which fixtures are controlled by lighting controls

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 20

New Construction Lighting Power Density CodeRequirements ndash Space by Space Method

Building Specific Space Types LPD (Wft2) Building Specific Space Types LPD (Wft2)

GymnasiumExercise Center AutomotivemdashServiceRepair 07

Playing Area 14 Manufacturing

Exercise Area 09 Low (lt25 ft Floor to Ceiling Height) 12

CourthousePolice StationPenitentiary High (gt25 ft Floor to Ceiling Height) 17

Courtroom 19 Detailed Manufacturing 21

Confinement Cells 09 Equipment Room 12

Judges Chambers 13 Control Room 05

Fire Stations HotelMotel Guest Rooms 11 Fire Station Engine Room 08 DormitorymdashLiving Quarters 11

Sleeping Quarters 03 Museum

Post Office-Sorting Area 12 General Exhibition 10 Convention Center-Exhibit Space 13 Restoration 17

Library BankOfficemdashBanking Activity Area 15 Card File and Cataloging 11 Religious Buildings

Stacks 17 Worship Pulpit Choir 24

Reading Area 12 Fellowship Hall 09

Hospital Retail

Emergency 27 Sales Area [For accent lighting see 93121(c)] 17

Recovery 08 Mall Concourse 17

Nurse Station 10 Sports Arena

ExamTreatment 15 Ring Sports Area 27

Pharmacy 12 Court Sports Area 23

Patient Room 07 Indoor Playing Field Area 14

Operating Room 22 Warehouse

Nursery 06 Fine Material Storage 14

Medical Supply 14 MediumBulky Material Storage 09

Physical Therapy 09 Parking GaragemdashGarage Area 02

Radiology 04 Transportation

LaundrymdashWashing 06 AirportmdashConcourse 06

AirTrainBusmdashBaggage Area 10

TerminalmdashTicket Counter 15

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 21

New Construction Lighting Power Density CodeRequirements ndash Building Area Method

Building Area Type 221 LPD (Wft2)

Automotive facility 09

Convention center 12

Courthouse 12

Dining bar loungeleisure 13

Dining cafeteriafast food 14

Dining family 16

Dormitory 1

Exercise center 1

Gymnasium 11

Health-care clinic 1

Hospital 12

Hotel 1

Library 13

Manufacturing facility 13

Motel 1

Motion picture theater 12

Building Area Type LPD (Wft2)

Multifamily 07

Museum 11

Office 1

Parking garage 03

Penitentiary 1

Performing arts theater 16

Policefire station 1

Post office 11

Religious building 13

Retail 15

Schooluniversity 12

Sports arena 11

Town hall 11

Transportation 1

Warehouse 08

Workshop 14

221 In cases where both a common space type and a building specific type are listed the building specific space type shall apply

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 22

Exterior New Construction LightingExterior New Construction savings over code lighting power density will be incentivized using custom lighting measure at $005kWh rate Participants must submit exterior lighting plans Submittals COMCHECK REPORT and lighting schedule for exterior lighting Savings are calculated from the LPD (Wsq ft) indicated below Additional information may be required based on the building exterior type and space description indicated below To contribute to incentive LEDs must satisfy program requirements for DLC Energy Star or equivalent listing

Required Documentation bull COMcheck Interior Lighting Report or equivalent analysis demonstrating space-by-space or

building area calculations bull Drawings showing lighting fixture layout bull Lighting fixture schedule sheet including fixture counts bull Fixture submittal or specification sheets showing model number and rated fixture wattage

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 23

Building Exterior Space Description LPD

Unco erect Pariki Ilg Area Parlurng ots arnd Drives 0 15 WfW

B i ing Grournds W al 1Yays lless Hlan 11] e 10 Wltirneru- 00

W a Nays 10 middot de or greater 112 W

Plaza a reas

Spec rest re areas

Stainh1ays 1ow 2

B i ing 8ntrames and Exits Ma efilbies m wr near foot of door width

Other doors 2o w 1r ear foot of door width

Ctmqpies and Overhimgs Free starndillg and a ched tmd 12s w m2 m bullerhangs

0 door sales Op en areas (ind udi Ilg ve id e sales 05 W lo )

street frontage far vehicle sales lots 21] W linear toot in addi middot on to open are-0bullmiddot lo~nce

B i ing facades 0 2 W tfl2 middot or eacil illumirnated N311 or surface

o r 5 0 Wllinear root fo r eac h m n inated N3l1 o r

surface length

Automated te lle r rnachmiddot es a lld 210 W per loca tion plus 91] night deposito liies W 1pernddiliorml A I middot per

1oca middot om

Eirltrances and gatehouse inspecliion 125 W ffl2 o middot uncovered slatiaBS a goo~ ed acir ies area

Load ing are-0s or law enforcement 0 5 W 2 of u rnco1bullered area fire ambu rnce and otiher emergency service ibullehmiddotctes

Drive-through w indOWs a taslrood 400 W per drive-Hlrough restaurants

Parking near 24 -h our retail 80111 W per main entry entmn ces

HVAC Equipment Air-Source Air Conditioners and Air-Source Heat Pumps New unitary air conditioning units or air source heat pumps that meet or exceed the qualifying cooling efficiency shown in the HVAC Incentives Worksheet are eligible for an incentive They can be either split systems or single package units The efficiency of split systems is based on an ARI reference number All packaged and split system cooling equipment must meet Air Conditioning and Refrigeration Institute (ARI) standards (210240 320 or 340360) be UL listed use a minimum ozone-depleting refrigerant (eg HCFC or HFC) All required efficiencies are based on the Consortium for Energy Efficiency (CEE) high-efficiency commercial air conditioning and heat pump specifications (wwwcee1org) A manufacturerrsquos specification sheet indicating the system efficiency must accompany the application Disposal of the existing unit

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 24

must comply with local codes and ordinances

Package Terminal Systems (Replacements) Package terminal air conditioners and packaged terminal heat pumps are through-the-wall self-contained units that are 2 tons (24000 Btuh) or less All EER values must be rated at 95degF outdoor dry-bulb temperature

Ductless Mini-Split Heat Pump lt54 Tons Incentives are offered for Ductless Mini-Split Heat Pump lt54 Tons with SEER rating greater than or equal to 120 and EER greater than or equal to 145 and HSPF greater than or equal to 90

Geothermal Heat Pump Geothermal equipment is a high-efficiency groundwater source water source or ground source heat pump system that meets or exceeds the energy efficiency requirements shown in the tables below These measures do not apply to heat pump systems coupled with non-heat pump systems such as chillers rooftop AC units boilers or cooling towers which must be filed as custom measures All HVAC applications other than comfort cooling and heating such as process cooling must also be applied for as custom measures

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 25

HVAC Heating Qualifying Incentive

Equipment Type and Cooling Capacity Cooling Qualifying Efficiency ($ per cooling Measure Code Efficiency

ton)

Air Cooled Air Conditioner

H01 lt 54 tons (lt 65000 Btuhr) 15 SEER NA $22

H02 lt 54 and lt 11 25 tons

125 IEER $22 (lt 65 000 Btuh and lt 135 000 Btuhr) NA

H03 lt11 25 and lt 20 tons

123 IEER NA $22 (lt 135000 Btuh and lt 240000 Btuhr)

H04 lt 20 and lt 6333 tons (~

11 1 IEER NA $22 240000 Btuh and lt 760000 Btuhr)

HOS ~ 6333 Ions (~ 760000 Btuhr) 103 IEER NA $22

Air Cooled Heat Pumps

H06 lt 54 tons (lt 65000 Btuhr) 143 SEER 87 HSPF $30

H07 lt 54 and lt 11 25 tons

123 IEER 3 3 COP $30 (lt 65000 Btuh and lt 135000 Btuhr)

HOS lt11 25 and lt 20 tons

1U IEER 3 2 COP $30 (lt 135000 Btuh and lt 240000 Btuhr)

H09 lt 2000 tons (240000 Btuhr) 105 IEER 3 2 COP $30

Packaged Terminal Systems (PTAC and PTHP) (PTHP only)

H10 lt 8000 Btuhr (lt066 tons) 11 8 EER 33 $17

H11 ~8000 and lt10500 Btuhr (~066 and lt 0875 tons) 11 4 EER 32 $17

H12 gt10500 Btuhr ( 875 tons) 107 EER 31 $17

H22 lt 54 tons (lt 65000 Btuhr) 121 EER 12 3 IEER NA $22

lt 54 and lt 11 25 tons 121 EER 12 3 IEER $22 H23

(lt 65000 Btuh and lt 135000 Btuhr) NA

H24 lt11 25 and lt 20 tons

120 EER 12 2 IEER $22 (lt 135000 Btuh and lt 240000 Btuhr) NA

H25 lt20 and lt 633 tons

119 EER 12 2 IEER $22 (lt 240000 Btuh and lt 760000 Btuhr) NA

H26 ~ 633 tons( lt760000 Btuhr) 110 EER 11 1 IEER NA

$22

HVAC Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 26

Other HVAC EquipmentHotel Guest Room Occupancy Sensor Incentives are offered for occupancy-based controls that control electric air conditioning air source heat pumps and or electric heating units for individual hotel rooms Systems with nonshyelectric heat are not eligible Sensors must be controlled by automatic occupancy detectors or a key-card system and the default setting for controlled units differ by at least 5 degrees (or shut the unit fan and heating or cooling off completely) from the operating set point during unshyoccupied periods The control system may also be tied into other electric loads such as lighting and plug loads to shut them off when occupancy is not sensed The incentive is per room Replacement or upgrades of existing occupancy-based controls are not eligible as a prescriptive incentive

Economizer Integrated Dual Enthalpy Economizer ControlsThis measure is targeted to non-residential establishments whose HVAC equipment is not equipped with a functional economizer

Circulation Fan High-Volume Low-SpeedFans must be greater than 16 feet in diameter and have variable speed control

ECM Circulation Fan This measure is targeted to non-residential customers whose air handling equipment currently uses a SP or PSC fan motor rather than an ECM This measure applies only to circulating fan motors of 1 HP or less Above 1 HP motors are governed by NEMA standards and would see little to no efficiency benefit by adding an ECM The targeted fan can supply heating or cooling only or both heating and cooling

ECM Circulation Pump This measure is targeted for replacement of a shaded pole or permanent split capacitor pump or motor with an electronically commutated pump or motor le75 HP

Retrocomissioning Cooling Systems Confined to chiller plant andor isolated packaged units For reservation must contain proposal with defined scope at equipment level that demonstrates energy savings For final approval required final commissioning report including raw data (TAB reports) demonstrating actual scope

This prescriptive measure can be used for facilities with maximum cooling demand less than 1687 tons Larger systems require the use of custom HVAC measure

Retrocomissioning Whole Building Covers all relevant major mechanical systems such as chiller plant air side systems compressed air andor process systems For reservation must contain proposal with defined scope at equipment level that demonstrates energy savings For final approval required final commissioning report including raw data (TAB reports) demonstrating actual scope

This prescriptive measure can be used for facilities less than 404858 square feet Larger facilities require the use of custom HVAC measure

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 27

Energy Management System For installing a web-based building automation system in existing buildings that currently have no digital automated HVAC controls or have outdated pneumatic control systems with inoperable time control functions Existing HVAC control systems must not have time-of-day scheduling Upgrading obsolete EMS HVAC system with inoperable time clock functions will be reviewed on a case-by-case basis for incentive eligibility This incentive cannot be combined with incentives for programmable thermostats or setback-setup controls Must include the controls strategy and a scaled floor-plan with controlled areas highlighted HVAC BAS systems must be new and include bull Central time clock control bull Web-based interface with PC-based controls and graphic bull Building performance Tracking bull Open-protocol architecture controls system shall consist of either LonTalk (ANSICEA 7091) or BACNet (ASHRAE ANSI 135) protocol being used between all controlled and controlling devices and every node on the network bull Minimum setback period must exceed 2200 hours per year bull A minimum setback space temperature of at least 10degF when heating and 5degF when cooling bull Ability to adjust schedules and settings remotely over the internet bull Report generation describing energy and operating trends

This prescriptive measure can be used for facilities with maximum cooling demand less than 456 tons Larger systems require the use of custom HVAC measure

Demand Controlled Ventilation New ventilation controls must use carbon dioxide levels to measure occupancy and modify the percentage of outside air based on occupancy levels Only buildings with space heating and cooling requirements are eligible Conditioned spaces must be kept between 65ordmF and 75ordmF during occupied operating hours Carbon dioxide sensors must be installed in conjunction with fully functioning motor operated outside air dampers Dual temperature air-side economizers with zone-level CO2 sensors for rooftop units are eligible

This prescriptive measure can be used for facilities with maximum cooling demand less than 2210 tons Larger systems require the use of custom HVAC measure

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 28

Other HVAC Measures- consult project manual for eligibility specifications HVAC

Measure Incentive Unit Quantity Incentive

Measure Code er Unit

H1 8 Hotel Guest Room Occupancy Sensor Room $20

H1 9 Economizer Integrated Dual Enthalpy Economizer Controls Ton $1 5

H20 Circulation Fan High-Volume Low-Speed Unit $30

H21 ECM Circulation Fan Fan $1 5

H27 ECM Circulation Pump Pump $50

H28 Retrocommissioning Cooling Systems

Ton $750

H29 Retrocommissioning Whole Buidling

Square Foot $010

H29 Energy Management System Ton $2500

H30 Demand Controlled Ventilation Ton $2500

Other HVAC Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 29

Unitary HVAC Chillers

Air-Cooled Chillers Water Cooled Positive Displacement Reciprocating Chillers and Water Cooled Centrifugal Chillers Chiller applications including existing multiple chiller configurations (including redundant or lsquostand-byrsquo chillers) existing chillers serving multiple load groups and chillers in industrial applications are defined as non-standard applications and must follow a site-specific custom protocol $005kWh) rate

Incentives are offered for chillers with an IPLV value (expressed in kW per ton) that is less than or equal to the qualifying efficiency shown in the table below The chiller efficiency rating must be based on ARI Standard 550590-2003 for IPLV conditions The chillers must meet ARI standards 550590-2003 be UL listed and use a minimum ozone-depleting refrigerant (eg HCFC or HFC) The ARI net capacity value should be used to determine the chiller tons A manufacturerrsquos specification sheet with the rated kWton-IPLV or COP-IPLV must accompany the application along with the four point performance data that is the basis for the IPLV The application must include a certification that the chiller is appropriately sized for site design load conditions

Chillers must satisfy efficiency requirements for both full load and IPLV efficiencies for either Path A or Path B The table shows the minimum efficiency ratings to qualify for the prescriptive incentive which must be consistent with the expected operating conditions of the efficient chiller For example if the efficient chiller satisfies Path A and generally performs at part load the appropriate baseline chiller efficiency is the IPLV value under Path A If the efficient chiller satisfies Path B and generally performs at full load the appropriate baseline chiller efficiency is the full load value under Path B Generally chillers operating above 70 percent load for a majority (50 or more) of operating hours should use Path A and chillers below 70 load for the majority of operating hours should use Path B

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 30

C3 lt 75 tons

C4 75 tons and lt 150 tons

cs ~ 150 tons and lt 300 tons C6 ~ 300 tons

Water Cooled Centrifugal Chillers C7 lt 300 tons CB ~ 300 tons and lt 600 tons

C9 ~ 600 tons

Path A

Qualifying Full Load Efficiency

Qualifying IPLV Efficiency

Path B

Qualifying Full Load Efficiency

Qualifying IPLV Efficiency

0780 kWton 0567 kWton 0800 kWton 0540 kWton

0775 kWton 0554 kWton 0790 kWton 0527 kWton

0680 kWton 0522 kWton 0718 kWton 0486 kWton 0620 kWton 0486 kWton 0639 kWton 0441 kWton

0634 kWton 0536 kWton 0639 kWton 0405 kWton 0576 kWton 0494 kWton 0600 kWton 0360 kWton

0570 kWton 0494 kWton 0590 kWton 0360 kWton

I

Incentive ($ton)

$17

$17

Unitary Chiller Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 31

Refrigeration

Anti-Sweat Heater Controls Incentives are offered for devices that sense the relative humidity in the air outside of the display case and cycles or turns off the glass door (if applicable) and frame anti-sweat heaters when the ambient dew point is below a preset set point Technologies that can turn off anti-sweat heaters based on sensing condensation (on the inner glass pane) also qualify Incentive is based on the number of doors

Evaporator Fan Controls This measure is for the installation of controls in medium temperature walk-in coolers The controller reduces airflow of the evaporator fans when there is no refrigerant flow The measure must control a minimum of 120 HP where fans operate continuously at full speed The measure also must reduce fan motor power by at least 75 during the off cycle This measure is not applicable if any of the following conditions apply 1) Compressor runs all the time with high duty cycle 2) Evaporator fan does not run at full speed all the time 3) Evaporator fan motor runs on poly-phase power 4) Evaporator fan motor is not shaded-pole or permanent split capacitor (PSC) 5) Evaporator fan does not use off-cycle or time-off defrost

Floating Head Pressure Controls Controls must vary head pressure to adjust condensing temperatures in relation to outdoor air temperature Must replace existing constant pressure or manually controlled systems to achieve reduced head pressure in order to maintain a minimum saturated condensing temperature of 70 degF or a 20 degF variance below design heat pressure during mild weather conditions Compressor size must be at least 5 HP

Automatic Door Closers for Walk-In Coolers and Freezers The auto-closer should be applied to the main insulated opaque door(s) of a walk-in cooler or freezer The auto-closer must be able to firmly close that door when it is within one inch of full closure This must be a newly installed automatic door closer replacements on previously installed door closers are not eligible for an incentive

EC Motor for Walk-inReach-in Refrigerated cases or Freezer cases Incentives are offered for replacement of an existing standard-efficiency shaded-pole or permanent split capacitor evaporator fan motor in refrigerated display cases or fan coil in walk-ins The replacement unit must be an Electronically Commutated Motor (ECM) This measure cannot be used in conjunction with the Evaporator Fan Controller measure

ENERGY STAR Solid Door Freezer and Glass Door Freezer and Refrigerators Incentives are offered for replacement of existing self-contained refrigerators and freezers with units that are ENERGY STARreg listed Only units with built-in refrigeration systems are qualified Units with remote refrigeration systems or units do not qualify Customers must provide proof that the appliance meets the CEE or ENERGY STAR efficiency specifications using ASHRAE Standard 72-2005 (38degF plusmn 2degF) Incentive is per unit

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 32

Refrigeration Suction Pipe Insulation 1 Must insulate bare refrigeration suction lines of 1 58 inches in diameter or less on existing equipment only 2 Cooler lines require frac34 inch of flexible closed-cell nitrite rubber or an equivalent insulation 3 Freezer lines require 1-inch of flexible closed-cell nitrite rubber or an equivalent insulation 4 Insulation exposed to the outdoors must be protected from the weather (ie jacketed with a medium-gauge aluminum jacket)

Night Cover 1 Must install a cover on an existing open refrigerated display case to decrease its cooling load during off hours 2 The equipment manufacturer must not object to the use of night covers for the existing display case model 3 This rebate is based on the linear footage of the installed 4 The cover must be applied for a period of at least six hours

Strip Curtain on Walk-In CoolerFreezer 1 New strip curtains or plastic swinging doors must be installed on doorways of refrigerated spaces (conditioned to less than 50deg F) 2 Rebate is based on the linear footage of the doorway that the strip curtains are being installed in 3 Opening between the strip curtain and bottom of doorway must be no larger than 1 inch 4 Strips must have an overlay greater than 1 inch

Evaporator Coil Defrost Control 1The current system must include an operating electric defrost system with a functional electroshymechanical time clock 2 Evaporator coil temperature and pressure must be monitored by controller in order to determine optimal defrost cycles 3 New intelligent control systems to control the defrost systems will typically replace timed- defrost controls

Variable Speed Refrigeration Compressor This measure VSD control for refrigeration systems and its eligibility targets applies to retrofit construction in the commercial and industrial building sectors it is most applicable to grocery stores or food processing applications with refrigeration systems This protocol is for a VSD control system replacing a slide valve control system

Add Doors to Open Refrigerated Cases The eligible retrofit equipment is either no sweat doors or doors with anti-sweat heaters If a lighting retrofit is included with the new doors it must consume the same amount of energy or less energy than the old lighting Upgrades to lighting or other system components should be processed separately Horizontal cases are not eligible and should be processed as custom

Door Gaskets PECO Smart Ideas For Your Business CampI Program Application Manual

Q1 2017 pg 33

This measure is applicable to commercial refrigeration and applies to the replacement of worn-out gaskets with new better-fitting gaskets Applicable gaskets include those located on the doors of walk-in andor reach-in coolers and freezers This protocol applies to the main doors of both low temperature (ldquofreezerrdquo ndash below 32 degF) and medium temperature (ldquocoolerrdquo ndash above 32 degF) walk-ins

Zero Energy Doors For this measure a no-heatlow-heat clear glass door must be installed on an upright display case It is limited to door heights of 57 inches or more Doors must have either heat reflective treated glass be gas filled or both This measure applies to low temperature cases onlymdashthose with a case temperature below 0degF Doors must have 3 or more panes Total door rail glass and frame heater amperage ( 120 volt) cannot exceed 039413 amps per door for low temperature display cases Rebate is based on the door width (not including case frame)

Air Cooled Refrigeration Condenser Approach temperature lt8F for low temperature loads lt13F for medium temperature loads

Oversized Condenser with VFD New standalone condenser must no more than 150 larger than load

Case Light Occupancy Controls Acceptable for freezer or refrigerated cases as well as open cases or cases with doors

LED Open Case Lighting For replacing open case T8 or T12 fluorescent fixtures with DLC listed LEDs on refrigerators coolers and freezers

LED Enclosed Case Lighting Refrigerated LED case lighting with or without motion sensors on enclosed refrigerated vertical displays The baseline equipment is assumed to be cases with uncontrolled T8 or T12 linear fluorescent lamps

LED Enclosed Case Lighting Freezer LED case lighting with or without motion sensors on enclosed freezer vertical displays The baseline equipment is assumed to be cases with uncontrolled T8 or T12 linear fluorescent lamps

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 34

Refrigeration Measures Ref Measure

Measure Incentive Unit IncentiveUnit Code R01 Anti-Sweat Heater Controls Door $30

R02 Evaporator Fan Controls Controller $50

R03 Floating-head Pressure Controls HP $20

R04 Automatic Door Closers fo r Walk-in Coolers Door $75

R05 Automatic Door Closers fo r Walk-in Freezers Door $75

R06 Evaporator Fan EC Motor fo r Reach- in Cases Motor $35

RO Evaporator Fan EC Motor fo r Walk-in Cases Motor $50

R08 ENERGY STARreg Glass Door Freezer lt15 Cu Ft Unit $100

R09 ENERGY STARreg Glass Door Freezer 15- 49 Cu Ft Unit $125

R10 ENERGY STARreg Glass Door Freezer ~ 50 Cu Ft Unit $145

R11 ENERGY STARreg Solid Door Freezer Unit $75

R12 ENERGY STARreg Glass Door Refrigerator lt50 Cu Ft Unit $30

R13 ENERGY STARreg Glass Door Refrigerator gt= 50 Cu Ft Unit $50

K14 t NtKGY ~ I AKreg ~Olld Uoor Ketngerator $ OU Cu t-t Unit $~0

R15 Suction Pipe Insulation Walk-in Coolers Linear Foot $050

R16 Suction Pipe Insulation Walk in Freezers Linear Foot $075

R17 Night Cover Linear Foot $800

R18 Strip Curtains on Walk-in Cooler Linear Foot $250

R19 Evaporator Coil Defrost Control Controller $7500

R20 Variable Speed Refrigeration Compressor Compressor $85

R21 Add Doors to Open Refrigerated Cases Door $55

R22 Door Gaskets Door $250

R23 Zero Energy Doors Door $50

R24 A ir Cooled Refrigeration Condenser Ton $10

R25 Oversized Condenser with VFD Ton $10

R26 Case Light Occupancy Controls Door $8

R27 LED Open Cose Lighting Cose $10

R28 LED Enclosed Case Lighting Refrigerated Door $30

R30 LED Enclosed Case Lighting Freezer Door $30

Refrigeration Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 35

Food Service Beverage and Snack Machine Controls Incentives are offered for refrigerated vending machines that contain non-perishable bottled and canned beverages Controller for both types of systems must include a passive infrared occupancy sensor to turn off fluorescent lights and other energized machine systems when the surrounding area is unoccupied for 15 minutes or longer For the refrigerated machines the control logic may include periodic power up at 2-hour intervals or longer to maintain product temperature and provide compressor protection

ENERGY STARreg Refrigerated Beverage Vending Machines Incentives are offered for ENERGY STARreg beverage vending machines Qualifying machines can be found at httpswwwenergystargovproductsothervending_machines

ENERGY STARreg Electric Steam Cooker This measure applies to the installation of electric ENERGY STAR steam cookers as either a new item or replacement for an existing unit Gas steam cookers are not eligible The steam cookers must meet minimum ENERGY STAR efficiency requirements A qualifying steam cooker must meet a minimum cooking efficiency of 50 percent and meet idle energy rates specified by pan capacity

ENERGY STARreg Electric Combination Oven This measure applies to electric ovens capable of handling single 12 x 20 x 25 pan per rack

ENERGY STARreg Commercial Convection Oven The oven must meet or exceed heavy load potato cooking energy efficiency of greater than 70 utilizing ASTM Standard F149 Applies only to electric ovens

ENERGY STARreg Commercial Fryers The commercial fryer must have a tested heavy load (French fry for large vats) cooking energy efficiency of greater than 80 utilizing American Society for Testing and Materials (ASTM) Standard F1361 for commercial fryers and ASTM Standard F2144 for large vat fryers Multiple vat configurations are paid per qualifying vat ENERGY STAR maintains a list of qualifying products and specifications at httpwwwenergystargov

ENERGY STARreg Commercial Hot Holding Cabinet Energy STAR rating electric

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 36

Food Service amp Other Measures FoodOther

Measure Incentive Unit Incentive

Measure Code Unit

F01 Beverage Machine Controls Unit $25

F02 Snack Machine Controls Unit $20

F03 ENERGY STARreg Refrigerated Beverage Vending Machir Unit $125

F04 ENERGY STARreg Commerc ial Steam Cooker Unit $200

F05 ENERGY STARreg Electric Combination Oven Unit $200

F06 ENERGY STARreg Commercial Electric Convection Oven Unit $150

F07 ENERGY STARreg Commerc ial Fryers Unit $100

F08 ENERGY STARregCommerc ial Hot Holding Cabinet Unit $200

Food Service Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 37

Motors and Variable Frequency DrivesEarly Replacement Motors For constant speed and uniformly loaded motors this measure applies to the replacement of old motors with new energy efficient motors of the same rated horsepower Old motors must be less than 15 years Replacements where the old motor and new motor have different horsepower ratings are considered custom measures Motors with variable speeds variable loading or industrial-specific applications are also considered custom measures

Motors Incentive Table Motors

Measure Code

HP Incentive per Motor

M01 15 - 10 $40 M02 11 - 50 $100 M03 51-100 $150 M04 gt100 $300

Only VFDs on unitary systems are eligible Non-unitary systems must be submitted as a custom measure Soft start motors are not eligible

Variable Frequency Drives on HVAC Fan Applications Incentives are offered for installing VFDs on existing HVAC fans that do not have pre-existing VFDs This measure applies to HVAC supply and return fans only All other fans including cooling tower fans must be submitted as custom measures Manually fixed speed settings on HVAC fans must be submitted via custom application The VFD must control motor speed automatically in response to pressure flow temperature or other variable signal The installation of a VSD must accompany the permanent removal or disabling of any throttling devices such as inlet vanes bypass dampers and throttling valves etc The incentive is offered per controlled HP

Variable Frequency Drives on Pump Applications Incentives are offered for installing VFDs on existing chilled water pumps and heating hot water pumps that do not have existing VFDs This measure applies to chilled water pumps and heating hot water pumps only All other pumps must be submitted as custom measures Manually fixed speed settings on pumps must be submitted via custom application The VFD must control motor speed automatically in response to pressure flow temperature or other variable signal The installation of a VSD must accompany the permanent removal or disabling of any throttling devices such as throttling valves The incentive is offered per controlled HP

Variable Speed Control for Kitchen Exhaust Hoods The measure consists of installing a new VSD in conjunction with a sensor control system that varies the exhaust rate of kitchen ventilation (exhaust andor makeup air fans) based on the heat and effluent output from the cooking appliances (ie the more heat and smokevapors generated the more ventilation needed) This involves installing a temperature sensor in the hood exhaust collar andor an optic sensor on the end of the hood that senses cooking conditions and allows the system to automatically vary the rate of exhaust to match requirements by adjusting the fan speed accordingly

Variable Speed Drives for Process or Other Equipment VFD must be used in conjunction with a process (non HVAC) application To qualify for this incentive the driven equipment must operate at least 2000 hours per year Redundant or back- up units do not qualify VFDs replacing existing VFDs do not qualify The VFD must control motor

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 38

speed automatically in response to pressure flow temperature or other variable signal VFDs installed as ldquosoft startrdquo without automatic manual closed loop speed control do not qualify The installation of a VFD must accompany the permanent removal or disabling of any throttling devices such as throttling valves The incentive is per controlled HP and only applies to controlled motors less than 50 HP

VSDVFD Incentives Table VFD

Measure Code

Measure Unit Incentive per Unit

Fan Application

V01 VFD on HVAC Fan HP $25 Pump Application

Variable Speed Control for Kitchen Exhaust Hoods

Variable Speed Drives for Process or Other Equipment

V02 VFD on Chilled Water Pumps HP $25 V03 VFD on Heating Hot Water Pumps HP $25

V04 Kitchen Exhaust Fan Retrofit Hood HP $500

V05 Process Motor lt 50 HP HP $50

Domestic Hot Water Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater This measure documents the energy savings attributed to converting from a standard electric water heater to an ENERGY STAR natural gaspropane-fired water heater or a standard oil-fired water heater with an Energy Factor of 0585

Heat Pump Water Heater This includes heat pump water heaters with energy factors meeting ENERGY STAR criteria The measure described here involves a direct retrofit of a resistive electric water heater with a heat pump water heater It does not cover systems where the heat pump is a pre-heater or is combined with other water heating sources More complicated installations can be treated as custom projects

Low Flow Pre-Rinse Spray Valve This measure applies to efficient low flow pre-rinse sprayers in grocery and food service applications The most likely areas of application are kitchens in restaurants and hotels Only premises with electric water heating may qualify for this incentive In addition the replacement pre-rinse spray nozzle must use less than 16 gallons per minute with a cleanability performance of 26 seconds per plate or less Low flow pre-rinse sprayers reduce hot water usage and save energy associated with water heating

Domestic Hot Water Incentive Table

Measure Code Measure Unit Retrofit Incentive per

Unit

W01 Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater Unit $100

W02 Heat Pump Water Heater Unit $100 W03 Low-Flow Pre-Rinse Spray Valve Valve $17

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 39

Compressed Air SystemsNo-loss Condensate Drain No-loss Condensate Drains are controlled by a sensor that monitors the level of condensate and only open when there is a need to drain condensate They close before compressed air is allowed to escape This measure is targeted to non-residential customers whose equipment is a timed drain that operates on a pre-set schedule Acceptable baseline conditions are compressed air systems with standard condensate drains operated by a solenoid and timer

Air-Entraining air nozzle This measure is targeted to non-residential customers whose compressed air equipment uses stationary air nozzles in a production application with an open copper tube of 18rdquo or 14rdquo orifice diameter Energy efficient conditions require replacement of an inefficient non-air entraining air nozzle with an energy efficient air-entraining air nozzle that use less than 15 CFM at 100 psi for industrial applications

Storage Tanks for LoadNo Load Screw Compressors This measure protocol applies to the installation of air receivers with pressureflow controls to loadno load compressors Loadno load compressors unload when there is low demand The process of unloading is done over a period of time to avoid foaming of the lubrication oil Using a storage tank with pressureflow control will buffer the air demands on the compressor Reducing the number of cycles in turn reduces the number of transition times from load to no load and saves energy The baseline equipment is a loadno load compressor with a 1 galcfm storage ratio or a modulating compressor with blowdown The high efficiency equipment is a loadno load compressor with a minimum storage ratio of 4 gallons of storage per cfm

Cycling Refrigerated Thermal Mass Dryer When air is compressed water vapor in the air condenses and collects in liquid form Some of this condensate collects in the air distribution system and can contaminate downstream components such as air tools with rust oil and pipe debris Refrigerated air dryers remove the water vapor by cooling the air to its dew point and separating the condensate Changes in production and seasonal variations in ambient air temperature lead to partial loading conditions on the dryer Standard air dryers use a hot gas bypass system that is inefficient at partial loads A Cycling Thermal Mass Dryer uses a thermal storage medium to store cooling capacity when the system is operated at partial loads allowing the dryer refrigerant compressor to cycle

This measure is targeted to non-residential customers whose equipment is a non-cycling refrigerated air dryer with a capacity of 600 cfm or below Acceptable baseline conditions are a non-cycling (eg continuous) air dryer with a capacity of 600 cfm or below The replacement of desiccant deliquescent heat-of-compression membrane or other types of dryers does not qualify under this measure

Variable Speed Air Compressor This type of compressor uses a special drive to control the speed (RPM) of the unit which in turn saves energy compared to a fixed speed equivalent

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 40

No-loss Condensate Drain Air-Entraining Air Nozzle Cycling Refrigerated Thermal Mass Dryer

Compressor Incentive per

Equipment Type Units Quantity Daily Operating Unit

Hours

CA04 Storage Tanks for LoadNo Load Screw

Compressor HP $10 Compressors

CA05 Variable Speed Air Compressor

Compressor HP $30

CA06 Compressed Air System Optimization

Compressor HP $50

Compressed Air System Optimization The submitted optimization measures must be identified in an Air System Audit or equivalent study to be eligible The measures must demonstrate energy savings as evaluated by a Program Engineer Additionally measures must also fall under one or more of the category below to be eligible

1) Install storage Receivers (new receivers only replacing existing storage receivers are ineligible)

2) Compressor control (must demonstrate improvement in partial load efficiency of the compress air system including reduceeliminate partially loaded units)

3) Dryer control 4) Source pressure reduction 5) Right-sizing distribution components such as piping filters regulators

connectors and hoses (routine maintenance replacements are ineligible) 6) Leakage detection and repair 7) Eliminate low-efficiency end-usages of compressed air 8) Heat recovery (most reduce electricity consumption of the replaced heat source)

Compressed Air Systems Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 41

lt65000 Btuh

~ 65000 Btuh and lt135000 Btuh

135000 Btuhand lt240000 Btuh

240000 Btuh and lt760000 Btuh

760000 Btuh

154

142

135

125

123

Chiller Capacity Path APath B efficiency (kWton )

lt 150 tons

~150 tons and lt300 tons

300 tons and lt400 tons

400 tons and lt600 tons

600 tons

lt75 tons

~75 tons and lt150 tons

~150 tons and lt300 tons

~300 tons and lt600 tons

600 tons

0610 FU0695 FL and 0550 IPLV0440 IPLV

0610 FU0635 FL and 0550 IPLV0400 IPLV

0560 FU0595 FL and 0520 IPLV0390 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

Path APath B efficiency (kWton )

0750 FU0780 FL and 0600 IPLV0500 IPLV

0720 FU0750 FL and 0560 IPLV0490 IPLV

0660 FU0680 FL and 0540 IPLV0440 IPLV

0610 FU0625 FL and 0520 IPLV0410 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

Data Centers Data Center incentives are available for facilities ranging in size from office server closets to large standalone facilities

Air Cooled Chiller Path APath B EER (BtuWh) lt150 tons 101 FL97 FL and 137 IPLV158 IPLV ge150 tons 101 FL97 FL and 140 IPLV161 IPLV

Air Cooled Chiller without Condenser Air-cooled chillers without condenser must be rated with matching condensers and comply with air-cooled chiller efficiency requirements

Computer Room Air Conditioner

Computer Room Air Handler Variable Speed Replacing constant speed CRAH with VSD CRAH

Water Cooled Centrifugal Chiller

Water Cooled Positive Displacement or Reciprocating Chiller

Uninterruptible Power Supply Must be Energy Star Certified UPS or have full load efficiency rating

ge948 for 20-100 kVA ge978for ge100 kVA

Mainframe Refresh The rated efficiency of the replacement Mainframes power supply must be at least 8 more

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 42

- Equipment Type Units IncentiveUnit

D1 Air Cooled Chiller Ton $4000 D2 Air Cooled Chiller W ithout Condenser Ton $2000 D3 Computer Room Air Conditioner Ton $3000 D4 Computer Room Air Handler Variable Speed Ton $1000 D5 Water Cooled Centrifugal Chiller Ton $3000 D6 Water Cooled Positive Displacement or Reciprocatin $3000 D7 Uninterruptible Power Supply 20-100 kVA $1000 D8 Uninterruptible Power Supply gt 100 kVA $1000 D9 Mainframe Refresh $2000

D10 Server Refresh $2000 D11 PC Power Managment System $600 D12 HVAC System Optimization $005 D1 3 HoUCold Aisle Containment kWh saved $005 D14 Server Virtualization kW reduction $40000 D1 5 Thin Clients Units $500

efficient compared to the existing Mainframes power supply The replacement Mainframe if Inactive must be decommissioned and removed from the Data Center

Server Refresh Replacement servers must be ENERGY STARreg certified Replacement servers power supply must be 5 more efficiency compared to the power supply of the replaced servers The replaced server must be decommissioned and removed from the data center

HVAC System Optimization Final system must have these features

-Implementation of free cooling by the addition of an economizer system -Conversion of constant speed CRACCRAH into variable speed operations using VFDs and additional control functionalities and -Elevation of exhaust air temperature

HotCold Aisle Containment Includes both Hot and Cold Aisles Installing new containment measures not replacing already existed aisle containment Plenum-only installations not eligible Must result in higher difference between the return air (hot aisle) and supply air (cold aisle) temperatures measured at rack intake and exhaust locations

Server Virtualization Minimum of consolidating 5 Servers virtualized into one Server The virtualized servers if inactive are removed from the Data Center

Thin Clients Must be ENERGY STAR certified thin clients Decommissioned clients are removed from the Data Center

Data Center Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 43

Whole Building Systems Whole Building Systems Approach

The Whole Building Systems approach is intended to encourage integrated energy efficient designs by providing enhanced incentives to the customer who addresses overall energy performance Owners of eligible and qualifying new construction and major renovation projects can receive Whole Building Systems incentives when energy modeling indicates the projectrsquos performance is over 10 better than the ASHRAE 901-2007 Savings from eligible electric end-uses in kilowatt hours define the amount of financial incentive Energy savings achieved through renewable energy sources are not counted toward project energy savings and are not included in the savings basis Incentive reservations obtained during the design phase of a project will be honored for up to 24 months

How to Apply for Whole Building Systems Incentives Before construction begins bull A Pre-notification Application must be submitted documenting the Owners intention to

seek Whole Building Systems incentives bull The Owner must confirm the goals and energy efficiency strategies being pursued by the

design team on the completed Pre-notification Worksheet (Checklist tab) and in the project Summary (Whole Building Performance Summary tab)

bull Submit executable building modeling software files bull Submit the Whole Building Performance Summary worksheet energy simulation model

inputs and outputs and supporting documentation bull Receive confirmation and eligibility notification from the PECO Smart Ideas team and

receive an incentive reservation bull The final incentive paid may differ from the reserved incentive amount The final

incentive will be calculated based on site-verified equipment installation and performance The Owners final application and complete documentation must be received within 6 months of equipment installation or certificate of occupancy whichever is later

bull An executable energy model and model output demonstrating compliance with the criteria of ASHRAE 901-2007 Appendix G will be required and the equipment data sheets LED lighting fixtures must be on the DLC or Energy STAR qualified products list (QPL) to be eligible LED fixtures not on the DLC or Energy STAR QPL has the option of submitting LM79 and LM80 test reports for evaluation against DLC and Energy STAR eligibility criteria

During the construction period bull Owner and design team continue to work closely with their chosen contractor to assure

energy efficiency measures are included and installed in the completed building

When the building is constructed and operational bull Complete the Owner final application Request an equipment verification site visit by the

PECO Smart Ideas team Equipment must be installed and fully operational o Program staff will schedule a site visit and utilize submitted documentation and

measurement tools to verify that the installation follows the submitted energy simulation model

bull When PECO confirms that there are no significant changes to the installed equipment payment of the reserved incentive will be made to the Owner within 6 weeks

bull If changes from the proposed design energy simulation are found the Owner and design team will be notified of the reduced incentive amount a period of 20 calendar days will

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 44

Improvement Incentive per Sq Ft

over Code

~11 to lt20 $0155

~20 to lt30 $0233

~30 to lt40 $0350

~40 to lt60 $0525

~60 $0700

be allowed for supplemental information to be provided if no additional information is received by PECO Smart Ideas team the reduced incentive payments will be made and sent to the Owner if additional clarification and information is available program staff will work diligently to resolve the discrepancies and arrive at a reasonable incentive adjustment with the customer

Payments made by PECO Smart Ideas are final

Customer Eligibility The Owner of the proposed new building project must be a customer of PECO and receive delivery of electric service from PECO to receive kilowatt-hour based incentives Please note that electricity supply can be provided by any vendor

Project Eligibility bull The project must be a new construction or major renovation Major renovations involving

the removal and redesign of at least two building systems (such as interior lighting and mechanical systems) may apply for Whole Building Systems incentives

bull To qualify for incentives projects must demonstrate energy efficiency enhancements that achieve at least 11 improvement in the proposed design versus the standard baseline

bull The Owner must submit a Pre-approval Application to the program at the stage where changes for increased energy efficiency are still feasible and construction has not been completed

bull Projects receiving Whole Building Systems incentives are not eligible to receive other incentives such as the prescriptive or custom program incentives for the same scope

bull Project components that are NOT eligible for consideration as a basis for PECO Smart Ideas include the following o Alternative fuel sources (eg use of gas or oil equipment in lieu of electric) Please note

that combined heat and power (CHP) systems will be incentivized for the electricity they produce

o Renewable energy sources (eg solar wind biomass) bull Ineligible savings include exterior lighting process receptacle miscellaneous loads and

other unregulated end-uses Custom incentives are available for new construction exterior lighting

Whole Building Systems Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 45

Custom Project Specifications Instructions for Energy Savings Calculations for Custom Projects Custom projects must involve measures that result in a reduction in electric energy use (kWh) Electricity savings may result from either efficiency improvements or fuel switching Custom Incentives are based on the first year kilowatt-hour savings Custom applications must be accompanied by detailed engineering calculations that document the annual total energy savings

The following serve as guidelines for the minimum required documentation

Equipment Information Submittals bull A list of the present and proposed equipment and components to be installed

including manufacturerrsquos catalogmodel number bull Manufacturerrsquos specification sheets showing capacities and performance for all major

components

Energy Savings Calculations Provide calculations documenting the predicted energy consumption of the existing (or baseline) and proposed system using appropriate analytical tools and clearly stated assumptions Calculations may be performed by ldquohandrdquo but spreadsheet analysis or more rigorous modeling is preferred All analysis should be provided in electronic format All assumptions such as operating hours existing and proposed equipment operational details must be presented Engineering algorithms and procedures from recognized technical organizations such as ASHRAE SMACNA ANSI etc must be used Use rated performance factors tested under accepted procedures specified by recognized rating agencies such as AHRI ANSI ASTM etc Provide an explanation when equipment performance rating conditions vary from standard conditions

In support of the calculations extensive documentation must be provided that provides the basis for the savings estimates The documentation must provide information on the equipment operating schedule daily and seasonal load profile and baseline AND energy efficient equipment performance at the operating loads Typical documentation for custom projects often includes bull Engineering or architectural drawings and ldquoequipment schedulerdquo sheets bull Component specification sheets that include part load efficiency or performance

factors bull Spreadsheet calculations or inputoutput files and results from system modeling or

other engineering analysis using accepted engineering algorithms and practices bull Log sheets trend logs from a building management system or other operating

documentation that are often necessary to document operating hours and equipment loading and used as a basis for the calculations (in some cases short term monitoring may be required to document the load profile)

bull Control sequence of operations that are necessary where controls play a part in the savings equation

Additional documentation other than that described in the application may be required for program participation Larger projects may also require pre- and post-project sub metering or monitoring of loads andor power input as part of another measurement and verification activity to demonstrate the actual energy savings that are realized

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 46

Baseline for Custom Analysis Where equipment is replaced prior to the end of its rated service life in order to achieve energy savings the existing equipment performance may be used as the baseline in the energy savings calculations Where equipment is replaced due to failure or for other reasons (such as obsolescence or a need for more capacity) the baseline performance used in the savings calculation should be either the minimum performance that would be required by code for that equipment type and application (where a code applies) or the performance of the equipment that would have been selected as the customers standard practice when a code does not apply

Baseline or Existing System Summary On custom worksheet on application form include make model number name plate information (such as operating voltage and rated full load amps) rated capacity quantities equipment condition and age facility operating hours equipment operating schedule and load curves If needed attach separate sheets

All decisions regarding incentives for custom projects are in the sole discretion of PECO

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 47

APPENDIX PROGRAM UPDATES SUMMARY (Q1 2017) Multifamily Nursing Home and Assisted Living retrofit customers need to apply for incentives through the PECO Smart Ideas Multi-Family Program administered by Franklin Energy For more information please contact Taylor Adler at tadlerfranklinenergycom or call 1-844-4BIZ-SAVE Multifamily Nursing Home and Assisted Living new construction customers can proceed with applying for incentives here

Revised Incentives

Data Centers

Measure Incentive Effective Immediately Previous Incentive

Air-cooled chiller for data centers $40ton $10ton Air-cooled chiller without condenser for data centers $20ton $10ton

Computer room air conditioner $30ton $7ton Water-cooled centrifugal chiller for data centers $30ton $5ton Water-cooled positive displacement or reciprocating chiller for data centers

$30ton $5ton

Uninterruptible power supply 20-100 kVA $10kVA $6kVA Uninterruptible power supply gt100 kVA $10kVA $1kVA Mainframe refresh $20kW installed $5kW installed Server refresh $20kW installed $4kW installed Server virtualization $400kW reduction $4kW reduction Thin clients $5units $4units

Lighting (Effective Immediately)

Measure Incentive Effective Immediately Specification Previous

Incentive Specification

New construction exterior LED outdoor flood light LED parking garage and canopy lighting LED polearm mounted parking and roadway lighting LED wall mount fixture

$005kWh (custom)

Lighting Power Density (LPD) Requirements Unchanged

$10-54 fixture

Lighting Power Density (LPD) (Wft2) by Space Type or Building Area

LED Replacement Lamps (Tubes) 2

$250lamp 5 Min Watts Reduced

$250lamp 6 Min Watts Reduced

LED Replacement Lamps (Tubes) 4

$400lamp 10 Min Watts Reduced

$400lamp 12 Min Watts Reduced

Permanent Fixture Removal $010Watt removed

Clarification of calculation to represent actual Wattage removed

$010Watt removed

Lighting (Effective 6117)

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 48

Measure Incentive Effective 6117 Specification Previous

Incentive Previous Specification

Interior LED high-bay fixtures andor retrofit kits if lt 20000 LED Lumens

$50fixture 150 Min Watts Reduced

$75fixture 150 Min Watts Reduced

Interior LED high-bay fixtures andor retrofit kits if gt 20000 LED Lumens

$75fixture 225 Min Watts Reduced

$75fixture 150 Min Watts Reduced

New Incentives

Compressed Air

Measure New Incentive Effective Immediately Variable speed air compressor $30compressor HP Compressed air system optimization $50compressor HP

HVAC

Measure New Incentive Effective Immediately ECM circulation pump $50pump Retro-commissioning cooling systems $750ton Retro-commissioning whole building $010square foot Energy management system $25ton Demand controlled ventilation $25ton Water-cooled air conditioner $22ton

Food Service

Measure New Incentive Effective Immediately Combination oven $200unit ENERGY STARreg commercial convection oven $150unit ENERGY STARreg commercial fryers $100unit ENERGY STARreg commercial hot holding cabinet $200unit

Refrigeration

Measure New Incentive Effective Immediately Air-cooled refrigeration condenser $10ton Oversized condenser with VFD $10ton Case light occupancy controls $750door

Lighting

Measure New Incentive Effective Immediately Interior central lighting controls $00175sq foot

Motors and Drives

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 49

-

Measure New Incentive Effective Immediately VFD for dust collection system motor $50HP

Application Clarifications and Revised Requirements

Clarification of LED Eligibility for New Construction or Retrofit Projects

LED Eligibility is determined by whether lighting products are listed in either the DesignLights Consortium (DLC) Qualified Products List of commercial-grade LED luminaires or the US Environmental Protection Agency database of ENERGY STAR certified products For products not yet listed contractors may submit LM79 and LM80 test reports PECO Smart Ideas engineers will review test reports to determine if the product in question meets performance specifications

Revised W 9 Requirement

W-9 forms EIN numbers are no longer required

Deletion of erroneous statement in New Construction Lighting

The following statement from previous Business Manual has been deleted ldquoThe minimum lighting power density used to calculate the incentive shall be no lower than 50 of the ASHRAE 901-2007 valuerdquo

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 50

  • Commercial amp Industrial Program Application Manual
    • Follow This Easy Process
      • Pre-Approval Application Checklist
      • Final Application Checklist
          • Terms and Conditions
            • Program Effective Dates
            • Program and Project Eligibility
            • Incentive Payment Limits
            • Application Review Process
            • Inspections andor PUCrsquos Statewide Program Evaluation
            • Requirements for Custom Project Electricity Savings Calculation
            • Tax Liability
            • No Endorsement
            • Warranties
            • Limitation of Liability
            • Assignment
            • Customerrsquos Certification
            • Termination
            • Acknowledgement
              • Retrofit Lighting Solutions
                • General Linear Fluorescent Lamp and Ballast Specification Requirements
                • LED Lamps and Fixtures
                • Minimum Watts Reduced
                • Linear LED (Tubes)
                • Permanent Fixture Removal
                  • LED Traffic Signals
                    • LED Traffic Signals Incentive Table
                      • New Construction Lighting Specifications
                        • New Construction Lighting Incentives Table
                          • New Construction Lighting Power Density Code
                              • Exterior New Construction Lighting
                              • HVAC Equipment
                                • Air-Source Air Conditioners and Air-Source Heat Pumps
                                • Package Terminal Systems (Replacements)
                                • Ductless Mini-Split Heat Pump lt54 Tons
                                • Geothermal Heat Pump
                                  • Other HVAC Equipment
                                    • Hotel Guest Room Occupancy Sensor
                                    • ECM Circulation Fan
                                    • ECM Circulation Pump
                                    • Retrocomissioning Cooling Systems
                                    • Retrocomissioning Whole Building
                                    • Energy Management System
                                    • Demand Controlled Ventilation
                                    • Other HVAC Incentives Table
                                      • Unitary HVAC Chillers
                                        • Air-Cooled Chillers Water Cooled Positive Displacement Reciprocating Chillers and Water Cooled Centrifugal Chillers
                                          • Refrigeration
                                            • Anti-Sweat Heater Controls
                                            • Evaporator Fan Controls
                                            • Floating Head Pressure Controls
                                            • Automatic Door Closers for Walk-In Coolers and Freezers
                                            • EC Motor for Walk-inReach-in Refrigerated cases or Freezer cases
                                            • ENERGY STAR Solid Door Freezer and Glass Door Freezer and Refrigerators
                                            • Refrigeration Suction Pipe Insulation
                                            • Night Cover
                                            • Strip Curtain on Walk-In CoolerFreezer
                                            • Evaporator Coil Defrost Control
                                            • Variable Speed Refrigeration Compressor
                                            • Add Doors to Open Refrigerated Cases
                                            • Door Gaskets
                                            • Zero Energy Doors
                                            • Air Cooled Refrigeration Condenser
                                            • Oversized Condenser with VFD
                                            • Case Light Occupancy Controls
                                            • LED Open Case Lighting
                                            • LED Enclosed Case Lighting Refrigerated
                                            • LED Enclosed Case Lighting Freezer
                                              • Food Service
                                                • Beverage and Snack Machine Controls
                                                • ENERGY STARreg Refrigerated Beverage Vending Machines
                                                • ENERGY STARreg Electric Steam Cooker
                                                • ENERGY STARreg Electric Combination Oven
                                                • ENERGY STARreg Commercial Convection Oven
                                                • ENERGY STARreg Commercial Fryers
                                                • ENERGY STARreg Commercial Hot Holding Cabinet
                                                  • Motors and Variable Frequency Drives
                                                    • Early Replacement Motors
                                                    • Variable Frequency Drives on HVAC Fan Applications
                                                    • Variable Frequency Drives on Pump Applications
                                                    • Variable Speed Control for Kitchen Exhaust Hoods
                                                    • Variable Speed Drives for Process or Other Equipment
                                                      • Domestic Hot Water
                                                        • Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater
                                                        • Heat Pump Water Heater
                                                        • Low Flow Pre-Rinse Spray Valve
                                                        • Domestic Hot Water Incentive Table
                                                          • Compressed Air Systems
                                                            • No-loss Condensate Drain
                                                            • Air-Entraining air nozzle
                                                            • Storage Tanks for LoadNo Load Screw Compressors
                                                            • Cycling Refrigerated Thermal Mass Dryer
                                                            • Variable Speed Air Compressor
                                                            • Compressed Air System Optimization
                                                            • Compressed Air Systems Incentive Table
                                                              • Data Centers
                                                                • Air Cooled Chiller
                                                                • Air Cooled Chiller without Condenser
                                                                • Computer Room Air Conditioner
                                                                • Computer Room Air Handler Variable Speed
                                                                  • Replacing constant speed CRAH with VSD CRAH
                                                                    • Water Cooled Centrifugal Chiller
                                                                    • Water Cooled Positive Displacement or Reciprocating Chiller
                                                                    • Uninterruptible Power Supply
                                                                    • Mainframe Refresh
                                                                    • Server Refresh
                                                                      • Whole Building Systems
                                                                        • Whole Building Systems Approach
                                                                        • How to Apply for Whole Building Systems Incentives
                                                                        • Customer Eligibility
                                                                        • Project Eligibility
                                                                        • Whole Building Systems Incentives Table
                                                                          • Custom Project Specifications
                                                                            • Instructions for Energy Savings Calculations for Custom Projects
                                                                            • Equipment Information Submittals
                                                                            • Energy Savings Calculations
                                                                            • Baseline for Custom Analysis
                                                                            • Baseline or Existing System Summary

Lighting Controls that Exceed Code Requirements

New Construction Lighting SpecificationsUnder the Lighting Power Density Approach the lighting power installed is compared with the lighting power allowed by code Incentives are available for systems where the installed lighting power is lower than the code-allowed power by at least 10 Savings are based on the Lighting Power Density (LPD) calculated on a watts per square foot basis Incentives will be paid only on the area of the building where the lighting installation is complete and is ready for occupancy If a portion of a building is not built-out such that the lighting in an area is not complete and ready for occupancy then that portion is not eligible for an incentive Baseline lighting power density is based on ASHRAE 901- 2007 Either the Space-by-Space or Building Area method may be used to calculate the LPD for the purposes of the incentive

Required Documentation bull Lighting Worksheet bull COMcheck Interior Lighting Report or equivalent analysis demonstrating space-byshy

space or building area calculations bull Reflected ceiling plans and electrical plan sheets showing lighting fixture layout bull Lighting fixture schedule sheet including fixture counts bull Fixture submittal or specification sheets showing model number and rated fixture wattage bull Architectural floor plans displaying floor area affected by proposed lighting installation

New Construction Lighting Incentives Table Lighting Wattssq ft

Improvement over of Code Incentive

gt= 10 and lt 20 $0035sq gt= 20 and lt 30 $007sq ft gt= 30 and lt 40 $0105sq

gt= 40 $021 sq ft

Incentives will be paid on a ($005kWh) custom basis Please contact Program Staff for eligibility of lighting controls for New Construction projects

Interior Occupancy Sensors Incentives are offered for occupancy-based controls in areas where they are not required by code Passive infrared ultrasonic detectors and fixture-integrated sensors or sensors with a combination sensor are eligible All sensors must be hard-wired and control interior lighting fixtures The incentive is per Watt controlled An inventory of the controlled fixtures and their wattage must be provided for each sensor with the Final Application

Daylight Dimming System Incentives are offered for daylight sensor controls in spaces with suitable available ambient light for at least part of the day Light may be through skylights clerestories windows or ldquolight tubesrdquo The controls can be onoff stepped or continuous dimming The onoff controller should turn off artificial lighting when the interior illuminance meets the desired indoor lighting level The stepped controller generally dims the artificial lighting 50 when the interior illuminance levels reach 50 of the desired lighting levels Continuous or dimming controllers dim artificial lighting proportionally to the available ambient light All types of daylight sensor controls are required to be commissioned in order to ensure proper sensor calibration and energy savings

Required Documentation bull Cut sheets or submittals of lighting control systems Reflected ceiling plans or schedule

showing which fixtures are controlled by lighting controls

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 20

New Construction Lighting Power Density CodeRequirements ndash Space by Space Method

Building Specific Space Types LPD (Wft2) Building Specific Space Types LPD (Wft2)

GymnasiumExercise Center AutomotivemdashServiceRepair 07

Playing Area 14 Manufacturing

Exercise Area 09 Low (lt25 ft Floor to Ceiling Height) 12

CourthousePolice StationPenitentiary High (gt25 ft Floor to Ceiling Height) 17

Courtroom 19 Detailed Manufacturing 21

Confinement Cells 09 Equipment Room 12

Judges Chambers 13 Control Room 05

Fire Stations HotelMotel Guest Rooms 11 Fire Station Engine Room 08 DormitorymdashLiving Quarters 11

Sleeping Quarters 03 Museum

Post Office-Sorting Area 12 General Exhibition 10 Convention Center-Exhibit Space 13 Restoration 17

Library BankOfficemdashBanking Activity Area 15 Card File and Cataloging 11 Religious Buildings

Stacks 17 Worship Pulpit Choir 24

Reading Area 12 Fellowship Hall 09

Hospital Retail

Emergency 27 Sales Area [For accent lighting see 93121(c)] 17

Recovery 08 Mall Concourse 17

Nurse Station 10 Sports Arena

ExamTreatment 15 Ring Sports Area 27

Pharmacy 12 Court Sports Area 23

Patient Room 07 Indoor Playing Field Area 14

Operating Room 22 Warehouse

Nursery 06 Fine Material Storage 14

Medical Supply 14 MediumBulky Material Storage 09

Physical Therapy 09 Parking GaragemdashGarage Area 02

Radiology 04 Transportation

LaundrymdashWashing 06 AirportmdashConcourse 06

AirTrainBusmdashBaggage Area 10

TerminalmdashTicket Counter 15

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 21

New Construction Lighting Power Density CodeRequirements ndash Building Area Method

Building Area Type 221 LPD (Wft2)

Automotive facility 09

Convention center 12

Courthouse 12

Dining bar loungeleisure 13

Dining cafeteriafast food 14

Dining family 16

Dormitory 1

Exercise center 1

Gymnasium 11

Health-care clinic 1

Hospital 12

Hotel 1

Library 13

Manufacturing facility 13

Motel 1

Motion picture theater 12

Building Area Type LPD (Wft2)

Multifamily 07

Museum 11

Office 1

Parking garage 03

Penitentiary 1

Performing arts theater 16

Policefire station 1

Post office 11

Religious building 13

Retail 15

Schooluniversity 12

Sports arena 11

Town hall 11

Transportation 1

Warehouse 08

Workshop 14

221 In cases where both a common space type and a building specific type are listed the building specific space type shall apply

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 22

Exterior New Construction LightingExterior New Construction savings over code lighting power density will be incentivized using custom lighting measure at $005kWh rate Participants must submit exterior lighting plans Submittals COMCHECK REPORT and lighting schedule for exterior lighting Savings are calculated from the LPD (Wsq ft) indicated below Additional information may be required based on the building exterior type and space description indicated below To contribute to incentive LEDs must satisfy program requirements for DLC Energy Star or equivalent listing

Required Documentation bull COMcheck Interior Lighting Report or equivalent analysis demonstrating space-by-space or

building area calculations bull Drawings showing lighting fixture layout bull Lighting fixture schedule sheet including fixture counts bull Fixture submittal or specification sheets showing model number and rated fixture wattage

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 23

Building Exterior Space Description LPD

Unco erect Pariki Ilg Area Parlurng ots arnd Drives 0 15 WfW

B i ing Grournds W al 1Yays lless Hlan 11] e 10 Wltirneru- 00

W a Nays 10 middot de or greater 112 W

Plaza a reas

Spec rest re areas

Stainh1ays 1ow 2

B i ing 8ntrames and Exits Ma efilbies m wr near foot of door width

Other doors 2o w 1r ear foot of door width

Ctmqpies and Overhimgs Free starndillg and a ched tmd 12s w m2 m bullerhangs

0 door sales Op en areas (ind udi Ilg ve id e sales 05 W lo )

street frontage far vehicle sales lots 21] W linear toot in addi middot on to open are-0bullmiddot lo~nce

B i ing facades 0 2 W tfl2 middot or eacil illumirnated N311 or surface

o r 5 0 Wllinear root fo r eac h m n inated N3l1 o r

surface length

Automated te lle r rnachmiddot es a lld 210 W per loca tion plus 91] night deposito liies W 1pernddiliorml A I middot per

1oca middot om

Eirltrances and gatehouse inspecliion 125 W ffl2 o middot uncovered slatiaBS a goo~ ed acir ies area

Load ing are-0s or law enforcement 0 5 W 2 of u rnco1bullered area fire ambu rnce and otiher emergency service ibullehmiddotctes

Drive-through w indOWs a taslrood 400 W per drive-Hlrough restaurants

Parking near 24 -h our retail 80111 W per main entry entmn ces

HVAC Equipment Air-Source Air Conditioners and Air-Source Heat Pumps New unitary air conditioning units or air source heat pumps that meet or exceed the qualifying cooling efficiency shown in the HVAC Incentives Worksheet are eligible for an incentive They can be either split systems or single package units The efficiency of split systems is based on an ARI reference number All packaged and split system cooling equipment must meet Air Conditioning and Refrigeration Institute (ARI) standards (210240 320 or 340360) be UL listed use a minimum ozone-depleting refrigerant (eg HCFC or HFC) All required efficiencies are based on the Consortium for Energy Efficiency (CEE) high-efficiency commercial air conditioning and heat pump specifications (wwwcee1org) A manufacturerrsquos specification sheet indicating the system efficiency must accompany the application Disposal of the existing unit

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 24

must comply with local codes and ordinances

Package Terminal Systems (Replacements) Package terminal air conditioners and packaged terminal heat pumps are through-the-wall self-contained units that are 2 tons (24000 Btuh) or less All EER values must be rated at 95degF outdoor dry-bulb temperature

Ductless Mini-Split Heat Pump lt54 Tons Incentives are offered for Ductless Mini-Split Heat Pump lt54 Tons with SEER rating greater than or equal to 120 and EER greater than or equal to 145 and HSPF greater than or equal to 90

Geothermal Heat Pump Geothermal equipment is a high-efficiency groundwater source water source or ground source heat pump system that meets or exceeds the energy efficiency requirements shown in the tables below These measures do not apply to heat pump systems coupled with non-heat pump systems such as chillers rooftop AC units boilers or cooling towers which must be filed as custom measures All HVAC applications other than comfort cooling and heating such as process cooling must also be applied for as custom measures

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 25

HVAC Heating Qualifying Incentive

Equipment Type and Cooling Capacity Cooling Qualifying Efficiency ($ per cooling Measure Code Efficiency

ton)

Air Cooled Air Conditioner

H01 lt 54 tons (lt 65000 Btuhr) 15 SEER NA $22

H02 lt 54 and lt 11 25 tons

125 IEER $22 (lt 65 000 Btuh and lt 135 000 Btuhr) NA

H03 lt11 25 and lt 20 tons

123 IEER NA $22 (lt 135000 Btuh and lt 240000 Btuhr)

H04 lt 20 and lt 6333 tons (~

11 1 IEER NA $22 240000 Btuh and lt 760000 Btuhr)

HOS ~ 6333 Ions (~ 760000 Btuhr) 103 IEER NA $22

Air Cooled Heat Pumps

H06 lt 54 tons (lt 65000 Btuhr) 143 SEER 87 HSPF $30

H07 lt 54 and lt 11 25 tons

123 IEER 3 3 COP $30 (lt 65000 Btuh and lt 135000 Btuhr)

HOS lt11 25 and lt 20 tons

1U IEER 3 2 COP $30 (lt 135000 Btuh and lt 240000 Btuhr)

H09 lt 2000 tons (240000 Btuhr) 105 IEER 3 2 COP $30

Packaged Terminal Systems (PTAC and PTHP) (PTHP only)

H10 lt 8000 Btuhr (lt066 tons) 11 8 EER 33 $17

H11 ~8000 and lt10500 Btuhr (~066 and lt 0875 tons) 11 4 EER 32 $17

H12 gt10500 Btuhr ( 875 tons) 107 EER 31 $17

H22 lt 54 tons (lt 65000 Btuhr) 121 EER 12 3 IEER NA $22

lt 54 and lt 11 25 tons 121 EER 12 3 IEER $22 H23

(lt 65000 Btuh and lt 135000 Btuhr) NA

H24 lt11 25 and lt 20 tons

120 EER 12 2 IEER $22 (lt 135000 Btuh and lt 240000 Btuhr) NA

H25 lt20 and lt 633 tons

119 EER 12 2 IEER $22 (lt 240000 Btuh and lt 760000 Btuhr) NA

H26 ~ 633 tons( lt760000 Btuhr) 110 EER 11 1 IEER NA

$22

HVAC Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 26

Other HVAC EquipmentHotel Guest Room Occupancy Sensor Incentives are offered for occupancy-based controls that control electric air conditioning air source heat pumps and or electric heating units for individual hotel rooms Systems with nonshyelectric heat are not eligible Sensors must be controlled by automatic occupancy detectors or a key-card system and the default setting for controlled units differ by at least 5 degrees (or shut the unit fan and heating or cooling off completely) from the operating set point during unshyoccupied periods The control system may also be tied into other electric loads such as lighting and plug loads to shut them off when occupancy is not sensed The incentive is per room Replacement or upgrades of existing occupancy-based controls are not eligible as a prescriptive incentive

Economizer Integrated Dual Enthalpy Economizer ControlsThis measure is targeted to non-residential establishments whose HVAC equipment is not equipped with a functional economizer

Circulation Fan High-Volume Low-SpeedFans must be greater than 16 feet in diameter and have variable speed control

ECM Circulation Fan This measure is targeted to non-residential customers whose air handling equipment currently uses a SP or PSC fan motor rather than an ECM This measure applies only to circulating fan motors of 1 HP or less Above 1 HP motors are governed by NEMA standards and would see little to no efficiency benefit by adding an ECM The targeted fan can supply heating or cooling only or both heating and cooling

ECM Circulation Pump This measure is targeted for replacement of a shaded pole or permanent split capacitor pump or motor with an electronically commutated pump or motor le75 HP

Retrocomissioning Cooling Systems Confined to chiller plant andor isolated packaged units For reservation must contain proposal with defined scope at equipment level that demonstrates energy savings For final approval required final commissioning report including raw data (TAB reports) demonstrating actual scope

This prescriptive measure can be used for facilities with maximum cooling demand less than 1687 tons Larger systems require the use of custom HVAC measure

Retrocomissioning Whole Building Covers all relevant major mechanical systems such as chiller plant air side systems compressed air andor process systems For reservation must contain proposal with defined scope at equipment level that demonstrates energy savings For final approval required final commissioning report including raw data (TAB reports) demonstrating actual scope

This prescriptive measure can be used for facilities less than 404858 square feet Larger facilities require the use of custom HVAC measure

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 27

Energy Management System For installing a web-based building automation system in existing buildings that currently have no digital automated HVAC controls or have outdated pneumatic control systems with inoperable time control functions Existing HVAC control systems must not have time-of-day scheduling Upgrading obsolete EMS HVAC system with inoperable time clock functions will be reviewed on a case-by-case basis for incentive eligibility This incentive cannot be combined with incentives for programmable thermostats or setback-setup controls Must include the controls strategy and a scaled floor-plan with controlled areas highlighted HVAC BAS systems must be new and include bull Central time clock control bull Web-based interface with PC-based controls and graphic bull Building performance Tracking bull Open-protocol architecture controls system shall consist of either LonTalk (ANSICEA 7091) or BACNet (ASHRAE ANSI 135) protocol being used between all controlled and controlling devices and every node on the network bull Minimum setback period must exceed 2200 hours per year bull A minimum setback space temperature of at least 10degF when heating and 5degF when cooling bull Ability to adjust schedules and settings remotely over the internet bull Report generation describing energy and operating trends

This prescriptive measure can be used for facilities with maximum cooling demand less than 456 tons Larger systems require the use of custom HVAC measure

Demand Controlled Ventilation New ventilation controls must use carbon dioxide levels to measure occupancy and modify the percentage of outside air based on occupancy levels Only buildings with space heating and cooling requirements are eligible Conditioned spaces must be kept between 65ordmF and 75ordmF during occupied operating hours Carbon dioxide sensors must be installed in conjunction with fully functioning motor operated outside air dampers Dual temperature air-side economizers with zone-level CO2 sensors for rooftop units are eligible

This prescriptive measure can be used for facilities with maximum cooling demand less than 2210 tons Larger systems require the use of custom HVAC measure

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 28

Other HVAC Measures- consult project manual for eligibility specifications HVAC

Measure Incentive Unit Quantity Incentive

Measure Code er Unit

H1 8 Hotel Guest Room Occupancy Sensor Room $20

H1 9 Economizer Integrated Dual Enthalpy Economizer Controls Ton $1 5

H20 Circulation Fan High-Volume Low-Speed Unit $30

H21 ECM Circulation Fan Fan $1 5

H27 ECM Circulation Pump Pump $50

H28 Retrocommissioning Cooling Systems

Ton $750

H29 Retrocommissioning Whole Buidling

Square Foot $010

H29 Energy Management System Ton $2500

H30 Demand Controlled Ventilation Ton $2500

Other HVAC Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 29

Unitary HVAC Chillers

Air-Cooled Chillers Water Cooled Positive Displacement Reciprocating Chillers and Water Cooled Centrifugal Chillers Chiller applications including existing multiple chiller configurations (including redundant or lsquostand-byrsquo chillers) existing chillers serving multiple load groups and chillers in industrial applications are defined as non-standard applications and must follow a site-specific custom protocol $005kWh) rate

Incentives are offered for chillers with an IPLV value (expressed in kW per ton) that is less than or equal to the qualifying efficiency shown in the table below The chiller efficiency rating must be based on ARI Standard 550590-2003 for IPLV conditions The chillers must meet ARI standards 550590-2003 be UL listed and use a minimum ozone-depleting refrigerant (eg HCFC or HFC) The ARI net capacity value should be used to determine the chiller tons A manufacturerrsquos specification sheet with the rated kWton-IPLV or COP-IPLV must accompany the application along with the four point performance data that is the basis for the IPLV The application must include a certification that the chiller is appropriately sized for site design load conditions

Chillers must satisfy efficiency requirements for both full load and IPLV efficiencies for either Path A or Path B The table shows the minimum efficiency ratings to qualify for the prescriptive incentive which must be consistent with the expected operating conditions of the efficient chiller For example if the efficient chiller satisfies Path A and generally performs at part load the appropriate baseline chiller efficiency is the IPLV value under Path A If the efficient chiller satisfies Path B and generally performs at full load the appropriate baseline chiller efficiency is the full load value under Path B Generally chillers operating above 70 percent load for a majority (50 or more) of operating hours should use Path A and chillers below 70 load for the majority of operating hours should use Path B

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 30

C3 lt 75 tons

C4 75 tons and lt 150 tons

cs ~ 150 tons and lt 300 tons C6 ~ 300 tons

Water Cooled Centrifugal Chillers C7 lt 300 tons CB ~ 300 tons and lt 600 tons

C9 ~ 600 tons

Path A

Qualifying Full Load Efficiency

Qualifying IPLV Efficiency

Path B

Qualifying Full Load Efficiency

Qualifying IPLV Efficiency

0780 kWton 0567 kWton 0800 kWton 0540 kWton

0775 kWton 0554 kWton 0790 kWton 0527 kWton

0680 kWton 0522 kWton 0718 kWton 0486 kWton 0620 kWton 0486 kWton 0639 kWton 0441 kWton

0634 kWton 0536 kWton 0639 kWton 0405 kWton 0576 kWton 0494 kWton 0600 kWton 0360 kWton

0570 kWton 0494 kWton 0590 kWton 0360 kWton

I

Incentive ($ton)

$17

$17

Unitary Chiller Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 31

Refrigeration

Anti-Sweat Heater Controls Incentives are offered for devices that sense the relative humidity in the air outside of the display case and cycles or turns off the glass door (if applicable) and frame anti-sweat heaters when the ambient dew point is below a preset set point Technologies that can turn off anti-sweat heaters based on sensing condensation (on the inner glass pane) also qualify Incentive is based on the number of doors

Evaporator Fan Controls This measure is for the installation of controls in medium temperature walk-in coolers The controller reduces airflow of the evaporator fans when there is no refrigerant flow The measure must control a minimum of 120 HP where fans operate continuously at full speed The measure also must reduce fan motor power by at least 75 during the off cycle This measure is not applicable if any of the following conditions apply 1) Compressor runs all the time with high duty cycle 2) Evaporator fan does not run at full speed all the time 3) Evaporator fan motor runs on poly-phase power 4) Evaporator fan motor is not shaded-pole or permanent split capacitor (PSC) 5) Evaporator fan does not use off-cycle or time-off defrost

Floating Head Pressure Controls Controls must vary head pressure to adjust condensing temperatures in relation to outdoor air temperature Must replace existing constant pressure or manually controlled systems to achieve reduced head pressure in order to maintain a minimum saturated condensing temperature of 70 degF or a 20 degF variance below design heat pressure during mild weather conditions Compressor size must be at least 5 HP

Automatic Door Closers for Walk-In Coolers and Freezers The auto-closer should be applied to the main insulated opaque door(s) of a walk-in cooler or freezer The auto-closer must be able to firmly close that door when it is within one inch of full closure This must be a newly installed automatic door closer replacements on previously installed door closers are not eligible for an incentive

EC Motor for Walk-inReach-in Refrigerated cases or Freezer cases Incentives are offered for replacement of an existing standard-efficiency shaded-pole or permanent split capacitor evaporator fan motor in refrigerated display cases or fan coil in walk-ins The replacement unit must be an Electronically Commutated Motor (ECM) This measure cannot be used in conjunction with the Evaporator Fan Controller measure

ENERGY STAR Solid Door Freezer and Glass Door Freezer and Refrigerators Incentives are offered for replacement of existing self-contained refrigerators and freezers with units that are ENERGY STARreg listed Only units with built-in refrigeration systems are qualified Units with remote refrigeration systems or units do not qualify Customers must provide proof that the appliance meets the CEE or ENERGY STAR efficiency specifications using ASHRAE Standard 72-2005 (38degF plusmn 2degF) Incentive is per unit

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 32

Refrigeration Suction Pipe Insulation 1 Must insulate bare refrigeration suction lines of 1 58 inches in diameter or less on existing equipment only 2 Cooler lines require frac34 inch of flexible closed-cell nitrite rubber or an equivalent insulation 3 Freezer lines require 1-inch of flexible closed-cell nitrite rubber or an equivalent insulation 4 Insulation exposed to the outdoors must be protected from the weather (ie jacketed with a medium-gauge aluminum jacket)

Night Cover 1 Must install a cover on an existing open refrigerated display case to decrease its cooling load during off hours 2 The equipment manufacturer must not object to the use of night covers for the existing display case model 3 This rebate is based on the linear footage of the installed 4 The cover must be applied for a period of at least six hours

Strip Curtain on Walk-In CoolerFreezer 1 New strip curtains or plastic swinging doors must be installed on doorways of refrigerated spaces (conditioned to less than 50deg F) 2 Rebate is based on the linear footage of the doorway that the strip curtains are being installed in 3 Opening between the strip curtain and bottom of doorway must be no larger than 1 inch 4 Strips must have an overlay greater than 1 inch

Evaporator Coil Defrost Control 1The current system must include an operating electric defrost system with a functional electroshymechanical time clock 2 Evaporator coil temperature and pressure must be monitored by controller in order to determine optimal defrost cycles 3 New intelligent control systems to control the defrost systems will typically replace timed- defrost controls

Variable Speed Refrigeration Compressor This measure VSD control for refrigeration systems and its eligibility targets applies to retrofit construction in the commercial and industrial building sectors it is most applicable to grocery stores or food processing applications with refrigeration systems This protocol is for a VSD control system replacing a slide valve control system

Add Doors to Open Refrigerated Cases The eligible retrofit equipment is either no sweat doors or doors with anti-sweat heaters If a lighting retrofit is included with the new doors it must consume the same amount of energy or less energy than the old lighting Upgrades to lighting or other system components should be processed separately Horizontal cases are not eligible and should be processed as custom

Door Gaskets PECO Smart Ideas For Your Business CampI Program Application Manual

Q1 2017 pg 33

This measure is applicable to commercial refrigeration and applies to the replacement of worn-out gaskets with new better-fitting gaskets Applicable gaskets include those located on the doors of walk-in andor reach-in coolers and freezers This protocol applies to the main doors of both low temperature (ldquofreezerrdquo ndash below 32 degF) and medium temperature (ldquocoolerrdquo ndash above 32 degF) walk-ins

Zero Energy Doors For this measure a no-heatlow-heat clear glass door must be installed on an upright display case It is limited to door heights of 57 inches or more Doors must have either heat reflective treated glass be gas filled or both This measure applies to low temperature cases onlymdashthose with a case temperature below 0degF Doors must have 3 or more panes Total door rail glass and frame heater amperage ( 120 volt) cannot exceed 039413 amps per door for low temperature display cases Rebate is based on the door width (not including case frame)

Air Cooled Refrigeration Condenser Approach temperature lt8F for low temperature loads lt13F for medium temperature loads

Oversized Condenser with VFD New standalone condenser must no more than 150 larger than load

Case Light Occupancy Controls Acceptable for freezer or refrigerated cases as well as open cases or cases with doors

LED Open Case Lighting For replacing open case T8 or T12 fluorescent fixtures with DLC listed LEDs on refrigerators coolers and freezers

LED Enclosed Case Lighting Refrigerated LED case lighting with or without motion sensors on enclosed refrigerated vertical displays The baseline equipment is assumed to be cases with uncontrolled T8 or T12 linear fluorescent lamps

LED Enclosed Case Lighting Freezer LED case lighting with or without motion sensors on enclosed freezer vertical displays The baseline equipment is assumed to be cases with uncontrolled T8 or T12 linear fluorescent lamps

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 34

Refrigeration Measures Ref Measure

Measure Incentive Unit IncentiveUnit Code R01 Anti-Sweat Heater Controls Door $30

R02 Evaporator Fan Controls Controller $50

R03 Floating-head Pressure Controls HP $20

R04 Automatic Door Closers fo r Walk-in Coolers Door $75

R05 Automatic Door Closers fo r Walk-in Freezers Door $75

R06 Evaporator Fan EC Motor fo r Reach- in Cases Motor $35

RO Evaporator Fan EC Motor fo r Walk-in Cases Motor $50

R08 ENERGY STARreg Glass Door Freezer lt15 Cu Ft Unit $100

R09 ENERGY STARreg Glass Door Freezer 15- 49 Cu Ft Unit $125

R10 ENERGY STARreg Glass Door Freezer ~ 50 Cu Ft Unit $145

R11 ENERGY STARreg Solid Door Freezer Unit $75

R12 ENERGY STARreg Glass Door Refrigerator lt50 Cu Ft Unit $30

R13 ENERGY STARreg Glass Door Refrigerator gt= 50 Cu Ft Unit $50

K14 t NtKGY ~ I AKreg ~Olld Uoor Ketngerator $ OU Cu t-t Unit $~0

R15 Suction Pipe Insulation Walk-in Coolers Linear Foot $050

R16 Suction Pipe Insulation Walk in Freezers Linear Foot $075

R17 Night Cover Linear Foot $800

R18 Strip Curtains on Walk-in Cooler Linear Foot $250

R19 Evaporator Coil Defrost Control Controller $7500

R20 Variable Speed Refrigeration Compressor Compressor $85

R21 Add Doors to Open Refrigerated Cases Door $55

R22 Door Gaskets Door $250

R23 Zero Energy Doors Door $50

R24 A ir Cooled Refrigeration Condenser Ton $10

R25 Oversized Condenser with VFD Ton $10

R26 Case Light Occupancy Controls Door $8

R27 LED Open Cose Lighting Cose $10

R28 LED Enclosed Case Lighting Refrigerated Door $30

R30 LED Enclosed Case Lighting Freezer Door $30

Refrigeration Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 35

Food Service Beverage and Snack Machine Controls Incentives are offered for refrigerated vending machines that contain non-perishable bottled and canned beverages Controller for both types of systems must include a passive infrared occupancy sensor to turn off fluorescent lights and other energized machine systems when the surrounding area is unoccupied for 15 minutes or longer For the refrigerated machines the control logic may include periodic power up at 2-hour intervals or longer to maintain product temperature and provide compressor protection

ENERGY STARreg Refrigerated Beverage Vending Machines Incentives are offered for ENERGY STARreg beverage vending machines Qualifying machines can be found at httpswwwenergystargovproductsothervending_machines

ENERGY STARreg Electric Steam Cooker This measure applies to the installation of electric ENERGY STAR steam cookers as either a new item or replacement for an existing unit Gas steam cookers are not eligible The steam cookers must meet minimum ENERGY STAR efficiency requirements A qualifying steam cooker must meet a minimum cooking efficiency of 50 percent and meet idle energy rates specified by pan capacity

ENERGY STARreg Electric Combination Oven This measure applies to electric ovens capable of handling single 12 x 20 x 25 pan per rack

ENERGY STARreg Commercial Convection Oven The oven must meet or exceed heavy load potato cooking energy efficiency of greater than 70 utilizing ASTM Standard F149 Applies only to electric ovens

ENERGY STARreg Commercial Fryers The commercial fryer must have a tested heavy load (French fry for large vats) cooking energy efficiency of greater than 80 utilizing American Society for Testing and Materials (ASTM) Standard F1361 for commercial fryers and ASTM Standard F2144 for large vat fryers Multiple vat configurations are paid per qualifying vat ENERGY STAR maintains a list of qualifying products and specifications at httpwwwenergystargov

ENERGY STARreg Commercial Hot Holding Cabinet Energy STAR rating electric

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 36

Food Service amp Other Measures FoodOther

Measure Incentive Unit Incentive

Measure Code Unit

F01 Beverage Machine Controls Unit $25

F02 Snack Machine Controls Unit $20

F03 ENERGY STARreg Refrigerated Beverage Vending Machir Unit $125

F04 ENERGY STARreg Commerc ial Steam Cooker Unit $200

F05 ENERGY STARreg Electric Combination Oven Unit $200

F06 ENERGY STARreg Commercial Electric Convection Oven Unit $150

F07 ENERGY STARreg Commerc ial Fryers Unit $100

F08 ENERGY STARregCommerc ial Hot Holding Cabinet Unit $200

Food Service Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 37

Motors and Variable Frequency DrivesEarly Replacement Motors For constant speed and uniformly loaded motors this measure applies to the replacement of old motors with new energy efficient motors of the same rated horsepower Old motors must be less than 15 years Replacements where the old motor and new motor have different horsepower ratings are considered custom measures Motors with variable speeds variable loading or industrial-specific applications are also considered custom measures

Motors Incentive Table Motors

Measure Code

HP Incentive per Motor

M01 15 - 10 $40 M02 11 - 50 $100 M03 51-100 $150 M04 gt100 $300

Only VFDs on unitary systems are eligible Non-unitary systems must be submitted as a custom measure Soft start motors are not eligible

Variable Frequency Drives on HVAC Fan Applications Incentives are offered for installing VFDs on existing HVAC fans that do not have pre-existing VFDs This measure applies to HVAC supply and return fans only All other fans including cooling tower fans must be submitted as custom measures Manually fixed speed settings on HVAC fans must be submitted via custom application The VFD must control motor speed automatically in response to pressure flow temperature or other variable signal The installation of a VSD must accompany the permanent removal or disabling of any throttling devices such as inlet vanes bypass dampers and throttling valves etc The incentive is offered per controlled HP

Variable Frequency Drives on Pump Applications Incentives are offered for installing VFDs on existing chilled water pumps and heating hot water pumps that do not have existing VFDs This measure applies to chilled water pumps and heating hot water pumps only All other pumps must be submitted as custom measures Manually fixed speed settings on pumps must be submitted via custom application The VFD must control motor speed automatically in response to pressure flow temperature or other variable signal The installation of a VSD must accompany the permanent removal or disabling of any throttling devices such as throttling valves The incentive is offered per controlled HP

Variable Speed Control for Kitchen Exhaust Hoods The measure consists of installing a new VSD in conjunction with a sensor control system that varies the exhaust rate of kitchen ventilation (exhaust andor makeup air fans) based on the heat and effluent output from the cooking appliances (ie the more heat and smokevapors generated the more ventilation needed) This involves installing a temperature sensor in the hood exhaust collar andor an optic sensor on the end of the hood that senses cooking conditions and allows the system to automatically vary the rate of exhaust to match requirements by adjusting the fan speed accordingly

Variable Speed Drives for Process or Other Equipment VFD must be used in conjunction with a process (non HVAC) application To qualify for this incentive the driven equipment must operate at least 2000 hours per year Redundant or back- up units do not qualify VFDs replacing existing VFDs do not qualify The VFD must control motor

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 38

speed automatically in response to pressure flow temperature or other variable signal VFDs installed as ldquosoft startrdquo without automatic manual closed loop speed control do not qualify The installation of a VFD must accompany the permanent removal or disabling of any throttling devices such as throttling valves The incentive is per controlled HP and only applies to controlled motors less than 50 HP

VSDVFD Incentives Table VFD

Measure Code

Measure Unit Incentive per Unit

Fan Application

V01 VFD on HVAC Fan HP $25 Pump Application

Variable Speed Control for Kitchen Exhaust Hoods

Variable Speed Drives for Process or Other Equipment

V02 VFD on Chilled Water Pumps HP $25 V03 VFD on Heating Hot Water Pumps HP $25

V04 Kitchen Exhaust Fan Retrofit Hood HP $500

V05 Process Motor lt 50 HP HP $50

Domestic Hot Water Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater This measure documents the energy savings attributed to converting from a standard electric water heater to an ENERGY STAR natural gaspropane-fired water heater or a standard oil-fired water heater with an Energy Factor of 0585

Heat Pump Water Heater This includes heat pump water heaters with energy factors meeting ENERGY STAR criteria The measure described here involves a direct retrofit of a resistive electric water heater with a heat pump water heater It does not cover systems where the heat pump is a pre-heater or is combined with other water heating sources More complicated installations can be treated as custom projects

Low Flow Pre-Rinse Spray Valve This measure applies to efficient low flow pre-rinse sprayers in grocery and food service applications The most likely areas of application are kitchens in restaurants and hotels Only premises with electric water heating may qualify for this incentive In addition the replacement pre-rinse spray nozzle must use less than 16 gallons per minute with a cleanability performance of 26 seconds per plate or less Low flow pre-rinse sprayers reduce hot water usage and save energy associated with water heating

Domestic Hot Water Incentive Table

Measure Code Measure Unit Retrofit Incentive per

Unit

W01 Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater Unit $100

W02 Heat Pump Water Heater Unit $100 W03 Low-Flow Pre-Rinse Spray Valve Valve $17

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 39

Compressed Air SystemsNo-loss Condensate Drain No-loss Condensate Drains are controlled by a sensor that monitors the level of condensate and only open when there is a need to drain condensate They close before compressed air is allowed to escape This measure is targeted to non-residential customers whose equipment is a timed drain that operates on a pre-set schedule Acceptable baseline conditions are compressed air systems with standard condensate drains operated by a solenoid and timer

Air-Entraining air nozzle This measure is targeted to non-residential customers whose compressed air equipment uses stationary air nozzles in a production application with an open copper tube of 18rdquo or 14rdquo orifice diameter Energy efficient conditions require replacement of an inefficient non-air entraining air nozzle with an energy efficient air-entraining air nozzle that use less than 15 CFM at 100 psi for industrial applications

Storage Tanks for LoadNo Load Screw Compressors This measure protocol applies to the installation of air receivers with pressureflow controls to loadno load compressors Loadno load compressors unload when there is low demand The process of unloading is done over a period of time to avoid foaming of the lubrication oil Using a storage tank with pressureflow control will buffer the air demands on the compressor Reducing the number of cycles in turn reduces the number of transition times from load to no load and saves energy The baseline equipment is a loadno load compressor with a 1 galcfm storage ratio or a modulating compressor with blowdown The high efficiency equipment is a loadno load compressor with a minimum storage ratio of 4 gallons of storage per cfm

Cycling Refrigerated Thermal Mass Dryer When air is compressed water vapor in the air condenses and collects in liquid form Some of this condensate collects in the air distribution system and can contaminate downstream components such as air tools with rust oil and pipe debris Refrigerated air dryers remove the water vapor by cooling the air to its dew point and separating the condensate Changes in production and seasonal variations in ambient air temperature lead to partial loading conditions on the dryer Standard air dryers use a hot gas bypass system that is inefficient at partial loads A Cycling Thermal Mass Dryer uses a thermal storage medium to store cooling capacity when the system is operated at partial loads allowing the dryer refrigerant compressor to cycle

This measure is targeted to non-residential customers whose equipment is a non-cycling refrigerated air dryer with a capacity of 600 cfm or below Acceptable baseline conditions are a non-cycling (eg continuous) air dryer with a capacity of 600 cfm or below The replacement of desiccant deliquescent heat-of-compression membrane or other types of dryers does not qualify under this measure

Variable Speed Air Compressor This type of compressor uses a special drive to control the speed (RPM) of the unit which in turn saves energy compared to a fixed speed equivalent

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 40

No-loss Condensate Drain Air-Entraining Air Nozzle Cycling Refrigerated Thermal Mass Dryer

Compressor Incentive per

Equipment Type Units Quantity Daily Operating Unit

Hours

CA04 Storage Tanks for LoadNo Load Screw

Compressor HP $10 Compressors

CA05 Variable Speed Air Compressor

Compressor HP $30

CA06 Compressed Air System Optimization

Compressor HP $50

Compressed Air System Optimization The submitted optimization measures must be identified in an Air System Audit or equivalent study to be eligible The measures must demonstrate energy savings as evaluated by a Program Engineer Additionally measures must also fall under one or more of the category below to be eligible

1) Install storage Receivers (new receivers only replacing existing storage receivers are ineligible)

2) Compressor control (must demonstrate improvement in partial load efficiency of the compress air system including reduceeliminate partially loaded units)

3) Dryer control 4) Source pressure reduction 5) Right-sizing distribution components such as piping filters regulators

connectors and hoses (routine maintenance replacements are ineligible) 6) Leakage detection and repair 7) Eliminate low-efficiency end-usages of compressed air 8) Heat recovery (most reduce electricity consumption of the replaced heat source)

Compressed Air Systems Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 41

lt65000 Btuh

~ 65000 Btuh and lt135000 Btuh

135000 Btuhand lt240000 Btuh

240000 Btuh and lt760000 Btuh

760000 Btuh

154

142

135

125

123

Chiller Capacity Path APath B efficiency (kWton )

lt 150 tons

~150 tons and lt300 tons

300 tons and lt400 tons

400 tons and lt600 tons

600 tons

lt75 tons

~75 tons and lt150 tons

~150 tons and lt300 tons

~300 tons and lt600 tons

600 tons

0610 FU0695 FL and 0550 IPLV0440 IPLV

0610 FU0635 FL and 0550 IPLV0400 IPLV

0560 FU0595 FL and 0520 IPLV0390 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

Path APath B efficiency (kWton )

0750 FU0780 FL and 0600 IPLV0500 IPLV

0720 FU0750 FL and 0560 IPLV0490 IPLV

0660 FU0680 FL and 0540 IPLV0440 IPLV

0610 FU0625 FL and 0520 IPLV0410 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

Data Centers Data Center incentives are available for facilities ranging in size from office server closets to large standalone facilities

Air Cooled Chiller Path APath B EER (BtuWh) lt150 tons 101 FL97 FL and 137 IPLV158 IPLV ge150 tons 101 FL97 FL and 140 IPLV161 IPLV

Air Cooled Chiller without Condenser Air-cooled chillers without condenser must be rated with matching condensers and comply with air-cooled chiller efficiency requirements

Computer Room Air Conditioner

Computer Room Air Handler Variable Speed Replacing constant speed CRAH with VSD CRAH

Water Cooled Centrifugal Chiller

Water Cooled Positive Displacement or Reciprocating Chiller

Uninterruptible Power Supply Must be Energy Star Certified UPS or have full load efficiency rating

ge948 for 20-100 kVA ge978for ge100 kVA

Mainframe Refresh The rated efficiency of the replacement Mainframes power supply must be at least 8 more

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 42

- Equipment Type Units IncentiveUnit

D1 Air Cooled Chiller Ton $4000 D2 Air Cooled Chiller W ithout Condenser Ton $2000 D3 Computer Room Air Conditioner Ton $3000 D4 Computer Room Air Handler Variable Speed Ton $1000 D5 Water Cooled Centrifugal Chiller Ton $3000 D6 Water Cooled Positive Displacement or Reciprocatin $3000 D7 Uninterruptible Power Supply 20-100 kVA $1000 D8 Uninterruptible Power Supply gt 100 kVA $1000 D9 Mainframe Refresh $2000

D10 Server Refresh $2000 D11 PC Power Managment System $600 D12 HVAC System Optimization $005 D1 3 HoUCold Aisle Containment kWh saved $005 D14 Server Virtualization kW reduction $40000 D1 5 Thin Clients Units $500

efficient compared to the existing Mainframes power supply The replacement Mainframe if Inactive must be decommissioned and removed from the Data Center

Server Refresh Replacement servers must be ENERGY STARreg certified Replacement servers power supply must be 5 more efficiency compared to the power supply of the replaced servers The replaced server must be decommissioned and removed from the data center

HVAC System Optimization Final system must have these features

-Implementation of free cooling by the addition of an economizer system -Conversion of constant speed CRACCRAH into variable speed operations using VFDs and additional control functionalities and -Elevation of exhaust air temperature

HotCold Aisle Containment Includes both Hot and Cold Aisles Installing new containment measures not replacing already existed aisle containment Plenum-only installations not eligible Must result in higher difference between the return air (hot aisle) and supply air (cold aisle) temperatures measured at rack intake and exhaust locations

Server Virtualization Minimum of consolidating 5 Servers virtualized into one Server The virtualized servers if inactive are removed from the Data Center

Thin Clients Must be ENERGY STAR certified thin clients Decommissioned clients are removed from the Data Center

Data Center Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 43

Whole Building Systems Whole Building Systems Approach

The Whole Building Systems approach is intended to encourage integrated energy efficient designs by providing enhanced incentives to the customer who addresses overall energy performance Owners of eligible and qualifying new construction and major renovation projects can receive Whole Building Systems incentives when energy modeling indicates the projectrsquos performance is over 10 better than the ASHRAE 901-2007 Savings from eligible electric end-uses in kilowatt hours define the amount of financial incentive Energy savings achieved through renewable energy sources are not counted toward project energy savings and are not included in the savings basis Incentive reservations obtained during the design phase of a project will be honored for up to 24 months

How to Apply for Whole Building Systems Incentives Before construction begins bull A Pre-notification Application must be submitted documenting the Owners intention to

seek Whole Building Systems incentives bull The Owner must confirm the goals and energy efficiency strategies being pursued by the

design team on the completed Pre-notification Worksheet (Checklist tab) and in the project Summary (Whole Building Performance Summary tab)

bull Submit executable building modeling software files bull Submit the Whole Building Performance Summary worksheet energy simulation model

inputs and outputs and supporting documentation bull Receive confirmation and eligibility notification from the PECO Smart Ideas team and

receive an incentive reservation bull The final incentive paid may differ from the reserved incentive amount The final

incentive will be calculated based on site-verified equipment installation and performance The Owners final application and complete documentation must be received within 6 months of equipment installation or certificate of occupancy whichever is later

bull An executable energy model and model output demonstrating compliance with the criteria of ASHRAE 901-2007 Appendix G will be required and the equipment data sheets LED lighting fixtures must be on the DLC or Energy STAR qualified products list (QPL) to be eligible LED fixtures not on the DLC or Energy STAR QPL has the option of submitting LM79 and LM80 test reports for evaluation against DLC and Energy STAR eligibility criteria

During the construction period bull Owner and design team continue to work closely with their chosen contractor to assure

energy efficiency measures are included and installed in the completed building

When the building is constructed and operational bull Complete the Owner final application Request an equipment verification site visit by the

PECO Smart Ideas team Equipment must be installed and fully operational o Program staff will schedule a site visit and utilize submitted documentation and

measurement tools to verify that the installation follows the submitted energy simulation model

bull When PECO confirms that there are no significant changes to the installed equipment payment of the reserved incentive will be made to the Owner within 6 weeks

bull If changes from the proposed design energy simulation are found the Owner and design team will be notified of the reduced incentive amount a period of 20 calendar days will

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 44

Improvement Incentive per Sq Ft

over Code

~11 to lt20 $0155

~20 to lt30 $0233

~30 to lt40 $0350

~40 to lt60 $0525

~60 $0700

be allowed for supplemental information to be provided if no additional information is received by PECO Smart Ideas team the reduced incentive payments will be made and sent to the Owner if additional clarification and information is available program staff will work diligently to resolve the discrepancies and arrive at a reasonable incentive adjustment with the customer

Payments made by PECO Smart Ideas are final

Customer Eligibility The Owner of the proposed new building project must be a customer of PECO and receive delivery of electric service from PECO to receive kilowatt-hour based incentives Please note that electricity supply can be provided by any vendor

Project Eligibility bull The project must be a new construction or major renovation Major renovations involving

the removal and redesign of at least two building systems (such as interior lighting and mechanical systems) may apply for Whole Building Systems incentives

bull To qualify for incentives projects must demonstrate energy efficiency enhancements that achieve at least 11 improvement in the proposed design versus the standard baseline

bull The Owner must submit a Pre-approval Application to the program at the stage where changes for increased energy efficiency are still feasible and construction has not been completed

bull Projects receiving Whole Building Systems incentives are not eligible to receive other incentives such as the prescriptive or custom program incentives for the same scope

bull Project components that are NOT eligible for consideration as a basis for PECO Smart Ideas include the following o Alternative fuel sources (eg use of gas or oil equipment in lieu of electric) Please note

that combined heat and power (CHP) systems will be incentivized for the electricity they produce

o Renewable energy sources (eg solar wind biomass) bull Ineligible savings include exterior lighting process receptacle miscellaneous loads and

other unregulated end-uses Custom incentives are available for new construction exterior lighting

Whole Building Systems Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 45

Custom Project Specifications Instructions for Energy Savings Calculations for Custom Projects Custom projects must involve measures that result in a reduction in electric energy use (kWh) Electricity savings may result from either efficiency improvements or fuel switching Custom Incentives are based on the first year kilowatt-hour savings Custom applications must be accompanied by detailed engineering calculations that document the annual total energy savings

The following serve as guidelines for the minimum required documentation

Equipment Information Submittals bull A list of the present and proposed equipment and components to be installed

including manufacturerrsquos catalogmodel number bull Manufacturerrsquos specification sheets showing capacities and performance for all major

components

Energy Savings Calculations Provide calculations documenting the predicted energy consumption of the existing (or baseline) and proposed system using appropriate analytical tools and clearly stated assumptions Calculations may be performed by ldquohandrdquo but spreadsheet analysis or more rigorous modeling is preferred All analysis should be provided in electronic format All assumptions such as operating hours existing and proposed equipment operational details must be presented Engineering algorithms and procedures from recognized technical organizations such as ASHRAE SMACNA ANSI etc must be used Use rated performance factors tested under accepted procedures specified by recognized rating agencies such as AHRI ANSI ASTM etc Provide an explanation when equipment performance rating conditions vary from standard conditions

In support of the calculations extensive documentation must be provided that provides the basis for the savings estimates The documentation must provide information on the equipment operating schedule daily and seasonal load profile and baseline AND energy efficient equipment performance at the operating loads Typical documentation for custom projects often includes bull Engineering or architectural drawings and ldquoequipment schedulerdquo sheets bull Component specification sheets that include part load efficiency or performance

factors bull Spreadsheet calculations or inputoutput files and results from system modeling or

other engineering analysis using accepted engineering algorithms and practices bull Log sheets trend logs from a building management system or other operating

documentation that are often necessary to document operating hours and equipment loading and used as a basis for the calculations (in some cases short term monitoring may be required to document the load profile)

bull Control sequence of operations that are necessary where controls play a part in the savings equation

Additional documentation other than that described in the application may be required for program participation Larger projects may also require pre- and post-project sub metering or monitoring of loads andor power input as part of another measurement and verification activity to demonstrate the actual energy savings that are realized

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 46

Baseline for Custom Analysis Where equipment is replaced prior to the end of its rated service life in order to achieve energy savings the existing equipment performance may be used as the baseline in the energy savings calculations Where equipment is replaced due to failure or for other reasons (such as obsolescence or a need for more capacity) the baseline performance used in the savings calculation should be either the minimum performance that would be required by code for that equipment type and application (where a code applies) or the performance of the equipment that would have been selected as the customers standard practice when a code does not apply

Baseline or Existing System Summary On custom worksheet on application form include make model number name plate information (such as operating voltage and rated full load amps) rated capacity quantities equipment condition and age facility operating hours equipment operating schedule and load curves If needed attach separate sheets

All decisions regarding incentives for custom projects are in the sole discretion of PECO

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 47

APPENDIX PROGRAM UPDATES SUMMARY (Q1 2017) Multifamily Nursing Home and Assisted Living retrofit customers need to apply for incentives through the PECO Smart Ideas Multi-Family Program administered by Franklin Energy For more information please contact Taylor Adler at tadlerfranklinenergycom or call 1-844-4BIZ-SAVE Multifamily Nursing Home and Assisted Living new construction customers can proceed with applying for incentives here

Revised Incentives

Data Centers

Measure Incentive Effective Immediately Previous Incentive

Air-cooled chiller for data centers $40ton $10ton Air-cooled chiller without condenser for data centers $20ton $10ton

Computer room air conditioner $30ton $7ton Water-cooled centrifugal chiller for data centers $30ton $5ton Water-cooled positive displacement or reciprocating chiller for data centers

$30ton $5ton

Uninterruptible power supply 20-100 kVA $10kVA $6kVA Uninterruptible power supply gt100 kVA $10kVA $1kVA Mainframe refresh $20kW installed $5kW installed Server refresh $20kW installed $4kW installed Server virtualization $400kW reduction $4kW reduction Thin clients $5units $4units

Lighting (Effective Immediately)

Measure Incentive Effective Immediately Specification Previous

Incentive Specification

New construction exterior LED outdoor flood light LED parking garage and canopy lighting LED polearm mounted parking and roadway lighting LED wall mount fixture

$005kWh (custom)

Lighting Power Density (LPD) Requirements Unchanged

$10-54 fixture

Lighting Power Density (LPD) (Wft2) by Space Type or Building Area

LED Replacement Lamps (Tubes) 2

$250lamp 5 Min Watts Reduced

$250lamp 6 Min Watts Reduced

LED Replacement Lamps (Tubes) 4

$400lamp 10 Min Watts Reduced

$400lamp 12 Min Watts Reduced

Permanent Fixture Removal $010Watt removed

Clarification of calculation to represent actual Wattage removed

$010Watt removed

Lighting (Effective 6117)

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 48

Measure Incentive Effective 6117 Specification Previous

Incentive Previous Specification

Interior LED high-bay fixtures andor retrofit kits if lt 20000 LED Lumens

$50fixture 150 Min Watts Reduced

$75fixture 150 Min Watts Reduced

Interior LED high-bay fixtures andor retrofit kits if gt 20000 LED Lumens

$75fixture 225 Min Watts Reduced

$75fixture 150 Min Watts Reduced

New Incentives

Compressed Air

Measure New Incentive Effective Immediately Variable speed air compressor $30compressor HP Compressed air system optimization $50compressor HP

HVAC

Measure New Incentive Effective Immediately ECM circulation pump $50pump Retro-commissioning cooling systems $750ton Retro-commissioning whole building $010square foot Energy management system $25ton Demand controlled ventilation $25ton Water-cooled air conditioner $22ton

Food Service

Measure New Incentive Effective Immediately Combination oven $200unit ENERGY STARreg commercial convection oven $150unit ENERGY STARreg commercial fryers $100unit ENERGY STARreg commercial hot holding cabinet $200unit

Refrigeration

Measure New Incentive Effective Immediately Air-cooled refrigeration condenser $10ton Oversized condenser with VFD $10ton Case light occupancy controls $750door

Lighting

Measure New Incentive Effective Immediately Interior central lighting controls $00175sq foot

Motors and Drives

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 49

-

Measure New Incentive Effective Immediately VFD for dust collection system motor $50HP

Application Clarifications and Revised Requirements

Clarification of LED Eligibility for New Construction or Retrofit Projects

LED Eligibility is determined by whether lighting products are listed in either the DesignLights Consortium (DLC) Qualified Products List of commercial-grade LED luminaires or the US Environmental Protection Agency database of ENERGY STAR certified products For products not yet listed contractors may submit LM79 and LM80 test reports PECO Smart Ideas engineers will review test reports to determine if the product in question meets performance specifications

Revised W 9 Requirement

W-9 forms EIN numbers are no longer required

Deletion of erroneous statement in New Construction Lighting

The following statement from previous Business Manual has been deleted ldquoThe minimum lighting power density used to calculate the incentive shall be no lower than 50 of the ASHRAE 901-2007 valuerdquo

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 50

  • Commercial amp Industrial Program Application Manual
    • Follow This Easy Process
      • Pre-Approval Application Checklist
      • Final Application Checklist
          • Terms and Conditions
            • Program Effective Dates
            • Program and Project Eligibility
            • Incentive Payment Limits
            • Application Review Process
            • Inspections andor PUCrsquos Statewide Program Evaluation
            • Requirements for Custom Project Electricity Savings Calculation
            • Tax Liability
            • No Endorsement
            • Warranties
            • Limitation of Liability
            • Assignment
            • Customerrsquos Certification
            • Termination
            • Acknowledgement
              • Retrofit Lighting Solutions
                • General Linear Fluorescent Lamp and Ballast Specification Requirements
                • LED Lamps and Fixtures
                • Minimum Watts Reduced
                • Linear LED (Tubes)
                • Permanent Fixture Removal
                  • LED Traffic Signals
                    • LED Traffic Signals Incentive Table
                      • New Construction Lighting Specifications
                        • New Construction Lighting Incentives Table
                          • New Construction Lighting Power Density Code
                              • Exterior New Construction Lighting
                              • HVAC Equipment
                                • Air-Source Air Conditioners and Air-Source Heat Pumps
                                • Package Terminal Systems (Replacements)
                                • Ductless Mini-Split Heat Pump lt54 Tons
                                • Geothermal Heat Pump
                                  • Other HVAC Equipment
                                    • Hotel Guest Room Occupancy Sensor
                                    • ECM Circulation Fan
                                    • ECM Circulation Pump
                                    • Retrocomissioning Cooling Systems
                                    • Retrocomissioning Whole Building
                                    • Energy Management System
                                    • Demand Controlled Ventilation
                                    • Other HVAC Incentives Table
                                      • Unitary HVAC Chillers
                                        • Air-Cooled Chillers Water Cooled Positive Displacement Reciprocating Chillers and Water Cooled Centrifugal Chillers
                                          • Refrigeration
                                            • Anti-Sweat Heater Controls
                                            • Evaporator Fan Controls
                                            • Floating Head Pressure Controls
                                            • Automatic Door Closers for Walk-In Coolers and Freezers
                                            • EC Motor for Walk-inReach-in Refrigerated cases or Freezer cases
                                            • ENERGY STAR Solid Door Freezer and Glass Door Freezer and Refrigerators
                                            • Refrigeration Suction Pipe Insulation
                                            • Night Cover
                                            • Strip Curtain on Walk-In CoolerFreezer
                                            • Evaporator Coil Defrost Control
                                            • Variable Speed Refrigeration Compressor
                                            • Add Doors to Open Refrigerated Cases
                                            • Door Gaskets
                                            • Zero Energy Doors
                                            • Air Cooled Refrigeration Condenser
                                            • Oversized Condenser with VFD
                                            • Case Light Occupancy Controls
                                            • LED Open Case Lighting
                                            • LED Enclosed Case Lighting Refrigerated
                                            • LED Enclosed Case Lighting Freezer
                                              • Food Service
                                                • Beverage and Snack Machine Controls
                                                • ENERGY STARreg Refrigerated Beverage Vending Machines
                                                • ENERGY STARreg Electric Steam Cooker
                                                • ENERGY STARreg Electric Combination Oven
                                                • ENERGY STARreg Commercial Convection Oven
                                                • ENERGY STARreg Commercial Fryers
                                                • ENERGY STARreg Commercial Hot Holding Cabinet
                                                  • Motors and Variable Frequency Drives
                                                    • Early Replacement Motors
                                                    • Variable Frequency Drives on HVAC Fan Applications
                                                    • Variable Frequency Drives on Pump Applications
                                                    • Variable Speed Control for Kitchen Exhaust Hoods
                                                    • Variable Speed Drives for Process or Other Equipment
                                                      • Domestic Hot Water
                                                        • Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater
                                                        • Heat Pump Water Heater
                                                        • Low Flow Pre-Rinse Spray Valve
                                                        • Domestic Hot Water Incentive Table
                                                          • Compressed Air Systems
                                                            • No-loss Condensate Drain
                                                            • Air-Entraining air nozzle
                                                            • Storage Tanks for LoadNo Load Screw Compressors
                                                            • Cycling Refrigerated Thermal Mass Dryer
                                                            • Variable Speed Air Compressor
                                                            • Compressed Air System Optimization
                                                            • Compressed Air Systems Incentive Table
                                                              • Data Centers
                                                                • Air Cooled Chiller
                                                                • Air Cooled Chiller without Condenser
                                                                • Computer Room Air Conditioner
                                                                • Computer Room Air Handler Variable Speed
                                                                  • Replacing constant speed CRAH with VSD CRAH
                                                                    • Water Cooled Centrifugal Chiller
                                                                    • Water Cooled Positive Displacement or Reciprocating Chiller
                                                                    • Uninterruptible Power Supply
                                                                    • Mainframe Refresh
                                                                    • Server Refresh
                                                                      • Whole Building Systems
                                                                        • Whole Building Systems Approach
                                                                        • How to Apply for Whole Building Systems Incentives
                                                                        • Customer Eligibility
                                                                        • Project Eligibility
                                                                        • Whole Building Systems Incentives Table
                                                                          • Custom Project Specifications
                                                                            • Instructions for Energy Savings Calculations for Custom Projects
                                                                            • Equipment Information Submittals
                                                                            • Energy Savings Calculations
                                                                            • Baseline for Custom Analysis
                                                                            • Baseline or Existing System Summary

New Construction Lighting Power Density CodeRequirements ndash Space by Space Method

Building Specific Space Types LPD (Wft2) Building Specific Space Types LPD (Wft2)

GymnasiumExercise Center AutomotivemdashServiceRepair 07

Playing Area 14 Manufacturing

Exercise Area 09 Low (lt25 ft Floor to Ceiling Height) 12

CourthousePolice StationPenitentiary High (gt25 ft Floor to Ceiling Height) 17

Courtroom 19 Detailed Manufacturing 21

Confinement Cells 09 Equipment Room 12

Judges Chambers 13 Control Room 05

Fire Stations HotelMotel Guest Rooms 11 Fire Station Engine Room 08 DormitorymdashLiving Quarters 11

Sleeping Quarters 03 Museum

Post Office-Sorting Area 12 General Exhibition 10 Convention Center-Exhibit Space 13 Restoration 17

Library BankOfficemdashBanking Activity Area 15 Card File and Cataloging 11 Religious Buildings

Stacks 17 Worship Pulpit Choir 24

Reading Area 12 Fellowship Hall 09

Hospital Retail

Emergency 27 Sales Area [For accent lighting see 93121(c)] 17

Recovery 08 Mall Concourse 17

Nurse Station 10 Sports Arena

ExamTreatment 15 Ring Sports Area 27

Pharmacy 12 Court Sports Area 23

Patient Room 07 Indoor Playing Field Area 14

Operating Room 22 Warehouse

Nursery 06 Fine Material Storage 14

Medical Supply 14 MediumBulky Material Storage 09

Physical Therapy 09 Parking GaragemdashGarage Area 02

Radiology 04 Transportation

LaundrymdashWashing 06 AirportmdashConcourse 06

AirTrainBusmdashBaggage Area 10

TerminalmdashTicket Counter 15

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 21

New Construction Lighting Power Density CodeRequirements ndash Building Area Method

Building Area Type 221 LPD (Wft2)

Automotive facility 09

Convention center 12

Courthouse 12

Dining bar loungeleisure 13

Dining cafeteriafast food 14

Dining family 16

Dormitory 1

Exercise center 1

Gymnasium 11

Health-care clinic 1

Hospital 12

Hotel 1

Library 13

Manufacturing facility 13

Motel 1

Motion picture theater 12

Building Area Type LPD (Wft2)

Multifamily 07

Museum 11

Office 1

Parking garage 03

Penitentiary 1

Performing arts theater 16

Policefire station 1

Post office 11

Religious building 13

Retail 15

Schooluniversity 12

Sports arena 11

Town hall 11

Transportation 1

Warehouse 08

Workshop 14

221 In cases where both a common space type and a building specific type are listed the building specific space type shall apply

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 22

Exterior New Construction LightingExterior New Construction savings over code lighting power density will be incentivized using custom lighting measure at $005kWh rate Participants must submit exterior lighting plans Submittals COMCHECK REPORT and lighting schedule for exterior lighting Savings are calculated from the LPD (Wsq ft) indicated below Additional information may be required based on the building exterior type and space description indicated below To contribute to incentive LEDs must satisfy program requirements for DLC Energy Star or equivalent listing

Required Documentation bull COMcheck Interior Lighting Report or equivalent analysis demonstrating space-by-space or

building area calculations bull Drawings showing lighting fixture layout bull Lighting fixture schedule sheet including fixture counts bull Fixture submittal or specification sheets showing model number and rated fixture wattage

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 23

Building Exterior Space Description LPD

Unco erect Pariki Ilg Area Parlurng ots arnd Drives 0 15 WfW

B i ing Grournds W al 1Yays lless Hlan 11] e 10 Wltirneru- 00

W a Nays 10 middot de or greater 112 W

Plaza a reas

Spec rest re areas

Stainh1ays 1ow 2

B i ing 8ntrames and Exits Ma efilbies m wr near foot of door width

Other doors 2o w 1r ear foot of door width

Ctmqpies and Overhimgs Free starndillg and a ched tmd 12s w m2 m bullerhangs

0 door sales Op en areas (ind udi Ilg ve id e sales 05 W lo )

street frontage far vehicle sales lots 21] W linear toot in addi middot on to open are-0bullmiddot lo~nce

B i ing facades 0 2 W tfl2 middot or eacil illumirnated N311 or surface

o r 5 0 Wllinear root fo r eac h m n inated N3l1 o r

surface length

Automated te lle r rnachmiddot es a lld 210 W per loca tion plus 91] night deposito liies W 1pernddiliorml A I middot per

1oca middot om

Eirltrances and gatehouse inspecliion 125 W ffl2 o middot uncovered slatiaBS a goo~ ed acir ies area

Load ing are-0s or law enforcement 0 5 W 2 of u rnco1bullered area fire ambu rnce and otiher emergency service ibullehmiddotctes

Drive-through w indOWs a taslrood 400 W per drive-Hlrough restaurants

Parking near 24 -h our retail 80111 W per main entry entmn ces

HVAC Equipment Air-Source Air Conditioners and Air-Source Heat Pumps New unitary air conditioning units or air source heat pumps that meet or exceed the qualifying cooling efficiency shown in the HVAC Incentives Worksheet are eligible for an incentive They can be either split systems or single package units The efficiency of split systems is based on an ARI reference number All packaged and split system cooling equipment must meet Air Conditioning and Refrigeration Institute (ARI) standards (210240 320 or 340360) be UL listed use a minimum ozone-depleting refrigerant (eg HCFC or HFC) All required efficiencies are based on the Consortium for Energy Efficiency (CEE) high-efficiency commercial air conditioning and heat pump specifications (wwwcee1org) A manufacturerrsquos specification sheet indicating the system efficiency must accompany the application Disposal of the existing unit

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 24

must comply with local codes and ordinances

Package Terminal Systems (Replacements) Package terminal air conditioners and packaged terminal heat pumps are through-the-wall self-contained units that are 2 tons (24000 Btuh) or less All EER values must be rated at 95degF outdoor dry-bulb temperature

Ductless Mini-Split Heat Pump lt54 Tons Incentives are offered for Ductless Mini-Split Heat Pump lt54 Tons with SEER rating greater than or equal to 120 and EER greater than or equal to 145 and HSPF greater than or equal to 90

Geothermal Heat Pump Geothermal equipment is a high-efficiency groundwater source water source or ground source heat pump system that meets or exceeds the energy efficiency requirements shown in the tables below These measures do not apply to heat pump systems coupled with non-heat pump systems such as chillers rooftop AC units boilers or cooling towers which must be filed as custom measures All HVAC applications other than comfort cooling and heating such as process cooling must also be applied for as custom measures

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 25

HVAC Heating Qualifying Incentive

Equipment Type and Cooling Capacity Cooling Qualifying Efficiency ($ per cooling Measure Code Efficiency

ton)

Air Cooled Air Conditioner

H01 lt 54 tons (lt 65000 Btuhr) 15 SEER NA $22

H02 lt 54 and lt 11 25 tons

125 IEER $22 (lt 65 000 Btuh and lt 135 000 Btuhr) NA

H03 lt11 25 and lt 20 tons

123 IEER NA $22 (lt 135000 Btuh and lt 240000 Btuhr)

H04 lt 20 and lt 6333 tons (~

11 1 IEER NA $22 240000 Btuh and lt 760000 Btuhr)

HOS ~ 6333 Ions (~ 760000 Btuhr) 103 IEER NA $22

Air Cooled Heat Pumps

H06 lt 54 tons (lt 65000 Btuhr) 143 SEER 87 HSPF $30

H07 lt 54 and lt 11 25 tons

123 IEER 3 3 COP $30 (lt 65000 Btuh and lt 135000 Btuhr)

HOS lt11 25 and lt 20 tons

1U IEER 3 2 COP $30 (lt 135000 Btuh and lt 240000 Btuhr)

H09 lt 2000 tons (240000 Btuhr) 105 IEER 3 2 COP $30

Packaged Terminal Systems (PTAC and PTHP) (PTHP only)

H10 lt 8000 Btuhr (lt066 tons) 11 8 EER 33 $17

H11 ~8000 and lt10500 Btuhr (~066 and lt 0875 tons) 11 4 EER 32 $17

H12 gt10500 Btuhr ( 875 tons) 107 EER 31 $17

H22 lt 54 tons (lt 65000 Btuhr) 121 EER 12 3 IEER NA $22

lt 54 and lt 11 25 tons 121 EER 12 3 IEER $22 H23

(lt 65000 Btuh and lt 135000 Btuhr) NA

H24 lt11 25 and lt 20 tons

120 EER 12 2 IEER $22 (lt 135000 Btuh and lt 240000 Btuhr) NA

H25 lt20 and lt 633 tons

119 EER 12 2 IEER $22 (lt 240000 Btuh and lt 760000 Btuhr) NA

H26 ~ 633 tons( lt760000 Btuhr) 110 EER 11 1 IEER NA

$22

HVAC Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 26

Other HVAC EquipmentHotel Guest Room Occupancy Sensor Incentives are offered for occupancy-based controls that control electric air conditioning air source heat pumps and or electric heating units for individual hotel rooms Systems with nonshyelectric heat are not eligible Sensors must be controlled by automatic occupancy detectors or a key-card system and the default setting for controlled units differ by at least 5 degrees (or shut the unit fan and heating or cooling off completely) from the operating set point during unshyoccupied periods The control system may also be tied into other electric loads such as lighting and plug loads to shut them off when occupancy is not sensed The incentive is per room Replacement or upgrades of existing occupancy-based controls are not eligible as a prescriptive incentive

Economizer Integrated Dual Enthalpy Economizer ControlsThis measure is targeted to non-residential establishments whose HVAC equipment is not equipped with a functional economizer

Circulation Fan High-Volume Low-SpeedFans must be greater than 16 feet in diameter and have variable speed control

ECM Circulation Fan This measure is targeted to non-residential customers whose air handling equipment currently uses a SP or PSC fan motor rather than an ECM This measure applies only to circulating fan motors of 1 HP or less Above 1 HP motors are governed by NEMA standards and would see little to no efficiency benefit by adding an ECM The targeted fan can supply heating or cooling only or both heating and cooling

ECM Circulation Pump This measure is targeted for replacement of a shaded pole or permanent split capacitor pump or motor with an electronically commutated pump or motor le75 HP

Retrocomissioning Cooling Systems Confined to chiller plant andor isolated packaged units For reservation must contain proposal with defined scope at equipment level that demonstrates energy savings For final approval required final commissioning report including raw data (TAB reports) demonstrating actual scope

This prescriptive measure can be used for facilities with maximum cooling demand less than 1687 tons Larger systems require the use of custom HVAC measure

Retrocomissioning Whole Building Covers all relevant major mechanical systems such as chiller plant air side systems compressed air andor process systems For reservation must contain proposal with defined scope at equipment level that demonstrates energy savings For final approval required final commissioning report including raw data (TAB reports) demonstrating actual scope

This prescriptive measure can be used for facilities less than 404858 square feet Larger facilities require the use of custom HVAC measure

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 27

Energy Management System For installing a web-based building automation system in existing buildings that currently have no digital automated HVAC controls or have outdated pneumatic control systems with inoperable time control functions Existing HVAC control systems must not have time-of-day scheduling Upgrading obsolete EMS HVAC system with inoperable time clock functions will be reviewed on a case-by-case basis for incentive eligibility This incentive cannot be combined with incentives for programmable thermostats or setback-setup controls Must include the controls strategy and a scaled floor-plan with controlled areas highlighted HVAC BAS systems must be new and include bull Central time clock control bull Web-based interface with PC-based controls and graphic bull Building performance Tracking bull Open-protocol architecture controls system shall consist of either LonTalk (ANSICEA 7091) or BACNet (ASHRAE ANSI 135) protocol being used between all controlled and controlling devices and every node on the network bull Minimum setback period must exceed 2200 hours per year bull A minimum setback space temperature of at least 10degF when heating and 5degF when cooling bull Ability to adjust schedules and settings remotely over the internet bull Report generation describing energy and operating trends

This prescriptive measure can be used for facilities with maximum cooling demand less than 456 tons Larger systems require the use of custom HVAC measure

Demand Controlled Ventilation New ventilation controls must use carbon dioxide levels to measure occupancy and modify the percentage of outside air based on occupancy levels Only buildings with space heating and cooling requirements are eligible Conditioned spaces must be kept between 65ordmF and 75ordmF during occupied operating hours Carbon dioxide sensors must be installed in conjunction with fully functioning motor operated outside air dampers Dual temperature air-side economizers with zone-level CO2 sensors for rooftop units are eligible

This prescriptive measure can be used for facilities with maximum cooling demand less than 2210 tons Larger systems require the use of custom HVAC measure

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 28

Other HVAC Measures- consult project manual for eligibility specifications HVAC

Measure Incentive Unit Quantity Incentive

Measure Code er Unit

H1 8 Hotel Guest Room Occupancy Sensor Room $20

H1 9 Economizer Integrated Dual Enthalpy Economizer Controls Ton $1 5

H20 Circulation Fan High-Volume Low-Speed Unit $30

H21 ECM Circulation Fan Fan $1 5

H27 ECM Circulation Pump Pump $50

H28 Retrocommissioning Cooling Systems

Ton $750

H29 Retrocommissioning Whole Buidling

Square Foot $010

H29 Energy Management System Ton $2500

H30 Demand Controlled Ventilation Ton $2500

Other HVAC Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 29

Unitary HVAC Chillers

Air-Cooled Chillers Water Cooled Positive Displacement Reciprocating Chillers and Water Cooled Centrifugal Chillers Chiller applications including existing multiple chiller configurations (including redundant or lsquostand-byrsquo chillers) existing chillers serving multiple load groups and chillers in industrial applications are defined as non-standard applications and must follow a site-specific custom protocol $005kWh) rate

Incentives are offered for chillers with an IPLV value (expressed in kW per ton) that is less than or equal to the qualifying efficiency shown in the table below The chiller efficiency rating must be based on ARI Standard 550590-2003 for IPLV conditions The chillers must meet ARI standards 550590-2003 be UL listed and use a minimum ozone-depleting refrigerant (eg HCFC or HFC) The ARI net capacity value should be used to determine the chiller tons A manufacturerrsquos specification sheet with the rated kWton-IPLV or COP-IPLV must accompany the application along with the four point performance data that is the basis for the IPLV The application must include a certification that the chiller is appropriately sized for site design load conditions

Chillers must satisfy efficiency requirements for both full load and IPLV efficiencies for either Path A or Path B The table shows the minimum efficiency ratings to qualify for the prescriptive incentive which must be consistent with the expected operating conditions of the efficient chiller For example if the efficient chiller satisfies Path A and generally performs at part load the appropriate baseline chiller efficiency is the IPLV value under Path A If the efficient chiller satisfies Path B and generally performs at full load the appropriate baseline chiller efficiency is the full load value under Path B Generally chillers operating above 70 percent load for a majority (50 or more) of operating hours should use Path A and chillers below 70 load for the majority of operating hours should use Path B

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 30

C3 lt 75 tons

C4 75 tons and lt 150 tons

cs ~ 150 tons and lt 300 tons C6 ~ 300 tons

Water Cooled Centrifugal Chillers C7 lt 300 tons CB ~ 300 tons and lt 600 tons

C9 ~ 600 tons

Path A

Qualifying Full Load Efficiency

Qualifying IPLV Efficiency

Path B

Qualifying Full Load Efficiency

Qualifying IPLV Efficiency

0780 kWton 0567 kWton 0800 kWton 0540 kWton

0775 kWton 0554 kWton 0790 kWton 0527 kWton

0680 kWton 0522 kWton 0718 kWton 0486 kWton 0620 kWton 0486 kWton 0639 kWton 0441 kWton

0634 kWton 0536 kWton 0639 kWton 0405 kWton 0576 kWton 0494 kWton 0600 kWton 0360 kWton

0570 kWton 0494 kWton 0590 kWton 0360 kWton

I

Incentive ($ton)

$17

$17

Unitary Chiller Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 31

Refrigeration

Anti-Sweat Heater Controls Incentives are offered for devices that sense the relative humidity in the air outside of the display case and cycles or turns off the glass door (if applicable) and frame anti-sweat heaters when the ambient dew point is below a preset set point Technologies that can turn off anti-sweat heaters based on sensing condensation (on the inner glass pane) also qualify Incentive is based on the number of doors

Evaporator Fan Controls This measure is for the installation of controls in medium temperature walk-in coolers The controller reduces airflow of the evaporator fans when there is no refrigerant flow The measure must control a minimum of 120 HP where fans operate continuously at full speed The measure also must reduce fan motor power by at least 75 during the off cycle This measure is not applicable if any of the following conditions apply 1) Compressor runs all the time with high duty cycle 2) Evaporator fan does not run at full speed all the time 3) Evaporator fan motor runs on poly-phase power 4) Evaporator fan motor is not shaded-pole or permanent split capacitor (PSC) 5) Evaporator fan does not use off-cycle or time-off defrost

Floating Head Pressure Controls Controls must vary head pressure to adjust condensing temperatures in relation to outdoor air temperature Must replace existing constant pressure or manually controlled systems to achieve reduced head pressure in order to maintain a minimum saturated condensing temperature of 70 degF or a 20 degF variance below design heat pressure during mild weather conditions Compressor size must be at least 5 HP

Automatic Door Closers for Walk-In Coolers and Freezers The auto-closer should be applied to the main insulated opaque door(s) of a walk-in cooler or freezer The auto-closer must be able to firmly close that door when it is within one inch of full closure This must be a newly installed automatic door closer replacements on previously installed door closers are not eligible for an incentive

EC Motor for Walk-inReach-in Refrigerated cases or Freezer cases Incentives are offered for replacement of an existing standard-efficiency shaded-pole or permanent split capacitor evaporator fan motor in refrigerated display cases or fan coil in walk-ins The replacement unit must be an Electronically Commutated Motor (ECM) This measure cannot be used in conjunction with the Evaporator Fan Controller measure

ENERGY STAR Solid Door Freezer and Glass Door Freezer and Refrigerators Incentives are offered for replacement of existing self-contained refrigerators and freezers with units that are ENERGY STARreg listed Only units with built-in refrigeration systems are qualified Units with remote refrigeration systems or units do not qualify Customers must provide proof that the appliance meets the CEE or ENERGY STAR efficiency specifications using ASHRAE Standard 72-2005 (38degF plusmn 2degF) Incentive is per unit

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 32

Refrigeration Suction Pipe Insulation 1 Must insulate bare refrigeration suction lines of 1 58 inches in diameter or less on existing equipment only 2 Cooler lines require frac34 inch of flexible closed-cell nitrite rubber or an equivalent insulation 3 Freezer lines require 1-inch of flexible closed-cell nitrite rubber or an equivalent insulation 4 Insulation exposed to the outdoors must be protected from the weather (ie jacketed with a medium-gauge aluminum jacket)

Night Cover 1 Must install a cover on an existing open refrigerated display case to decrease its cooling load during off hours 2 The equipment manufacturer must not object to the use of night covers for the existing display case model 3 This rebate is based on the linear footage of the installed 4 The cover must be applied for a period of at least six hours

Strip Curtain on Walk-In CoolerFreezer 1 New strip curtains or plastic swinging doors must be installed on doorways of refrigerated spaces (conditioned to less than 50deg F) 2 Rebate is based on the linear footage of the doorway that the strip curtains are being installed in 3 Opening between the strip curtain and bottom of doorway must be no larger than 1 inch 4 Strips must have an overlay greater than 1 inch

Evaporator Coil Defrost Control 1The current system must include an operating electric defrost system with a functional electroshymechanical time clock 2 Evaporator coil temperature and pressure must be monitored by controller in order to determine optimal defrost cycles 3 New intelligent control systems to control the defrost systems will typically replace timed- defrost controls

Variable Speed Refrigeration Compressor This measure VSD control for refrigeration systems and its eligibility targets applies to retrofit construction in the commercial and industrial building sectors it is most applicable to grocery stores or food processing applications with refrigeration systems This protocol is for a VSD control system replacing a slide valve control system

Add Doors to Open Refrigerated Cases The eligible retrofit equipment is either no sweat doors or doors with anti-sweat heaters If a lighting retrofit is included with the new doors it must consume the same amount of energy or less energy than the old lighting Upgrades to lighting or other system components should be processed separately Horizontal cases are not eligible and should be processed as custom

Door Gaskets PECO Smart Ideas For Your Business CampI Program Application Manual

Q1 2017 pg 33

This measure is applicable to commercial refrigeration and applies to the replacement of worn-out gaskets with new better-fitting gaskets Applicable gaskets include those located on the doors of walk-in andor reach-in coolers and freezers This protocol applies to the main doors of both low temperature (ldquofreezerrdquo ndash below 32 degF) and medium temperature (ldquocoolerrdquo ndash above 32 degF) walk-ins

Zero Energy Doors For this measure a no-heatlow-heat clear glass door must be installed on an upright display case It is limited to door heights of 57 inches or more Doors must have either heat reflective treated glass be gas filled or both This measure applies to low temperature cases onlymdashthose with a case temperature below 0degF Doors must have 3 or more panes Total door rail glass and frame heater amperage ( 120 volt) cannot exceed 039413 amps per door for low temperature display cases Rebate is based on the door width (not including case frame)

Air Cooled Refrigeration Condenser Approach temperature lt8F for low temperature loads lt13F for medium temperature loads

Oversized Condenser with VFD New standalone condenser must no more than 150 larger than load

Case Light Occupancy Controls Acceptable for freezer or refrigerated cases as well as open cases or cases with doors

LED Open Case Lighting For replacing open case T8 or T12 fluorescent fixtures with DLC listed LEDs on refrigerators coolers and freezers

LED Enclosed Case Lighting Refrigerated LED case lighting with or without motion sensors on enclosed refrigerated vertical displays The baseline equipment is assumed to be cases with uncontrolled T8 or T12 linear fluorescent lamps

LED Enclosed Case Lighting Freezer LED case lighting with or without motion sensors on enclosed freezer vertical displays The baseline equipment is assumed to be cases with uncontrolled T8 or T12 linear fluorescent lamps

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 34

Refrigeration Measures Ref Measure

Measure Incentive Unit IncentiveUnit Code R01 Anti-Sweat Heater Controls Door $30

R02 Evaporator Fan Controls Controller $50

R03 Floating-head Pressure Controls HP $20

R04 Automatic Door Closers fo r Walk-in Coolers Door $75

R05 Automatic Door Closers fo r Walk-in Freezers Door $75

R06 Evaporator Fan EC Motor fo r Reach- in Cases Motor $35

RO Evaporator Fan EC Motor fo r Walk-in Cases Motor $50

R08 ENERGY STARreg Glass Door Freezer lt15 Cu Ft Unit $100

R09 ENERGY STARreg Glass Door Freezer 15- 49 Cu Ft Unit $125

R10 ENERGY STARreg Glass Door Freezer ~ 50 Cu Ft Unit $145

R11 ENERGY STARreg Solid Door Freezer Unit $75

R12 ENERGY STARreg Glass Door Refrigerator lt50 Cu Ft Unit $30

R13 ENERGY STARreg Glass Door Refrigerator gt= 50 Cu Ft Unit $50

K14 t NtKGY ~ I AKreg ~Olld Uoor Ketngerator $ OU Cu t-t Unit $~0

R15 Suction Pipe Insulation Walk-in Coolers Linear Foot $050

R16 Suction Pipe Insulation Walk in Freezers Linear Foot $075

R17 Night Cover Linear Foot $800

R18 Strip Curtains on Walk-in Cooler Linear Foot $250

R19 Evaporator Coil Defrost Control Controller $7500

R20 Variable Speed Refrigeration Compressor Compressor $85

R21 Add Doors to Open Refrigerated Cases Door $55

R22 Door Gaskets Door $250

R23 Zero Energy Doors Door $50

R24 A ir Cooled Refrigeration Condenser Ton $10

R25 Oversized Condenser with VFD Ton $10

R26 Case Light Occupancy Controls Door $8

R27 LED Open Cose Lighting Cose $10

R28 LED Enclosed Case Lighting Refrigerated Door $30

R30 LED Enclosed Case Lighting Freezer Door $30

Refrigeration Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 35

Food Service Beverage and Snack Machine Controls Incentives are offered for refrigerated vending machines that contain non-perishable bottled and canned beverages Controller for both types of systems must include a passive infrared occupancy sensor to turn off fluorescent lights and other energized machine systems when the surrounding area is unoccupied for 15 minutes or longer For the refrigerated machines the control logic may include periodic power up at 2-hour intervals or longer to maintain product temperature and provide compressor protection

ENERGY STARreg Refrigerated Beverage Vending Machines Incentives are offered for ENERGY STARreg beverage vending machines Qualifying machines can be found at httpswwwenergystargovproductsothervending_machines

ENERGY STARreg Electric Steam Cooker This measure applies to the installation of electric ENERGY STAR steam cookers as either a new item or replacement for an existing unit Gas steam cookers are not eligible The steam cookers must meet minimum ENERGY STAR efficiency requirements A qualifying steam cooker must meet a minimum cooking efficiency of 50 percent and meet idle energy rates specified by pan capacity

ENERGY STARreg Electric Combination Oven This measure applies to electric ovens capable of handling single 12 x 20 x 25 pan per rack

ENERGY STARreg Commercial Convection Oven The oven must meet or exceed heavy load potato cooking energy efficiency of greater than 70 utilizing ASTM Standard F149 Applies only to electric ovens

ENERGY STARreg Commercial Fryers The commercial fryer must have a tested heavy load (French fry for large vats) cooking energy efficiency of greater than 80 utilizing American Society for Testing and Materials (ASTM) Standard F1361 for commercial fryers and ASTM Standard F2144 for large vat fryers Multiple vat configurations are paid per qualifying vat ENERGY STAR maintains a list of qualifying products and specifications at httpwwwenergystargov

ENERGY STARreg Commercial Hot Holding Cabinet Energy STAR rating electric

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 36

Food Service amp Other Measures FoodOther

Measure Incentive Unit Incentive

Measure Code Unit

F01 Beverage Machine Controls Unit $25

F02 Snack Machine Controls Unit $20

F03 ENERGY STARreg Refrigerated Beverage Vending Machir Unit $125

F04 ENERGY STARreg Commerc ial Steam Cooker Unit $200

F05 ENERGY STARreg Electric Combination Oven Unit $200

F06 ENERGY STARreg Commercial Electric Convection Oven Unit $150

F07 ENERGY STARreg Commerc ial Fryers Unit $100

F08 ENERGY STARregCommerc ial Hot Holding Cabinet Unit $200

Food Service Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 37

Motors and Variable Frequency DrivesEarly Replacement Motors For constant speed and uniformly loaded motors this measure applies to the replacement of old motors with new energy efficient motors of the same rated horsepower Old motors must be less than 15 years Replacements where the old motor and new motor have different horsepower ratings are considered custom measures Motors with variable speeds variable loading or industrial-specific applications are also considered custom measures

Motors Incentive Table Motors

Measure Code

HP Incentive per Motor

M01 15 - 10 $40 M02 11 - 50 $100 M03 51-100 $150 M04 gt100 $300

Only VFDs on unitary systems are eligible Non-unitary systems must be submitted as a custom measure Soft start motors are not eligible

Variable Frequency Drives on HVAC Fan Applications Incentives are offered for installing VFDs on existing HVAC fans that do not have pre-existing VFDs This measure applies to HVAC supply and return fans only All other fans including cooling tower fans must be submitted as custom measures Manually fixed speed settings on HVAC fans must be submitted via custom application The VFD must control motor speed automatically in response to pressure flow temperature or other variable signal The installation of a VSD must accompany the permanent removal or disabling of any throttling devices such as inlet vanes bypass dampers and throttling valves etc The incentive is offered per controlled HP

Variable Frequency Drives on Pump Applications Incentives are offered for installing VFDs on existing chilled water pumps and heating hot water pumps that do not have existing VFDs This measure applies to chilled water pumps and heating hot water pumps only All other pumps must be submitted as custom measures Manually fixed speed settings on pumps must be submitted via custom application The VFD must control motor speed automatically in response to pressure flow temperature or other variable signal The installation of a VSD must accompany the permanent removal or disabling of any throttling devices such as throttling valves The incentive is offered per controlled HP

Variable Speed Control for Kitchen Exhaust Hoods The measure consists of installing a new VSD in conjunction with a sensor control system that varies the exhaust rate of kitchen ventilation (exhaust andor makeup air fans) based on the heat and effluent output from the cooking appliances (ie the more heat and smokevapors generated the more ventilation needed) This involves installing a temperature sensor in the hood exhaust collar andor an optic sensor on the end of the hood that senses cooking conditions and allows the system to automatically vary the rate of exhaust to match requirements by adjusting the fan speed accordingly

Variable Speed Drives for Process or Other Equipment VFD must be used in conjunction with a process (non HVAC) application To qualify for this incentive the driven equipment must operate at least 2000 hours per year Redundant or back- up units do not qualify VFDs replacing existing VFDs do not qualify The VFD must control motor

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 38

speed automatically in response to pressure flow temperature or other variable signal VFDs installed as ldquosoft startrdquo without automatic manual closed loop speed control do not qualify The installation of a VFD must accompany the permanent removal or disabling of any throttling devices such as throttling valves The incentive is per controlled HP and only applies to controlled motors less than 50 HP

VSDVFD Incentives Table VFD

Measure Code

Measure Unit Incentive per Unit

Fan Application

V01 VFD on HVAC Fan HP $25 Pump Application

Variable Speed Control for Kitchen Exhaust Hoods

Variable Speed Drives for Process or Other Equipment

V02 VFD on Chilled Water Pumps HP $25 V03 VFD on Heating Hot Water Pumps HP $25

V04 Kitchen Exhaust Fan Retrofit Hood HP $500

V05 Process Motor lt 50 HP HP $50

Domestic Hot Water Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater This measure documents the energy savings attributed to converting from a standard electric water heater to an ENERGY STAR natural gaspropane-fired water heater or a standard oil-fired water heater with an Energy Factor of 0585

Heat Pump Water Heater This includes heat pump water heaters with energy factors meeting ENERGY STAR criteria The measure described here involves a direct retrofit of a resistive electric water heater with a heat pump water heater It does not cover systems where the heat pump is a pre-heater or is combined with other water heating sources More complicated installations can be treated as custom projects

Low Flow Pre-Rinse Spray Valve This measure applies to efficient low flow pre-rinse sprayers in grocery and food service applications The most likely areas of application are kitchens in restaurants and hotels Only premises with electric water heating may qualify for this incentive In addition the replacement pre-rinse spray nozzle must use less than 16 gallons per minute with a cleanability performance of 26 seconds per plate or less Low flow pre-rinse sprayers reduce hot water usage and save energy associated with water heating

Domestic Hot Water Incentive Table

Measure Code Measure Unit Retrofit Incentive per

Unit

W01 Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater Unit $100

W02 Heat Pump Water Heater Unit $100 W03 Low-Flow Pre-Rinse Spray Valve Valve $17

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 39

Compressed Air SystemsNo-loss Condensate Drain No-loss Condensate Drains are controlled by a sensor that monitors the level of condensate and only open when there is a need to drain condensate They close before compressed air is allowed to escape This measure is targeted to non-residential customers whose equipment is a timed drain that operates on a pre-set schedule Acceptable baseline conditions are compressed air systems with standard condensate drains operated by a solenoid and timer

Air-Entraining air nozzle This measure is targeted to non-residential customers whose compressed air equipment uses stationary air nozzles in a production application with an open copper tube of 18rdquo or 14rdquo orifice diameter Energy efficient conditions require replacement of an inefficient non-air entraining air nozzle with an energy efficient air-entraining air nozzle that use less than 15 CFM at 100 psi for industrial applications

Storage Tanks for LoadNo Load Screw Compressors This measure protocol applies to the installation of air receivers with pressureflow controls to loadno load compressors Loadno load compressors unload when there is low demand The process of unloading is done over a period of time to avoid foaming of the lubrication oil Using a storage tank with pressureflow control will buffer the air demands on the compressor Reducing the number of cycles in turn reduces the number of transition times from load to no load and saves energy The baseline equipment is a loadno load compressor with a 1 galcfm storage ratio or a modulating compressor with blowdown The high efficiency equipment is a loadno load compressor with a minimum storage ratio of 4 gallons of storage per cfm

Cycling Refrigerated Thermal Mass Dryer When air is compressed water vapor in the air condenses and collects in liquid form Some of this condensate collects in the air distribution system and can contaminate downstream components such as air tools with rust oil and pipe debris Refrigerated air dryers remove the water vapor by cooling the air to its dew point and separating the condensate Changes in production and seasonal variations in ambient air temperature lead to partial loading conditions on the dryer Standard air dryers use a hot gas bypass system that is inefficient at partial loads A Cycling Thermal Mass Dryer uses a thermal storage medium to store cooling capacity when the system is operated at partial loads allowing the dryer refrigerant compressor to cycle

This measure is targeted to non-residential customers whose equipment is a non-cycling refrigerated air dryer with a capacity of 600 cfm or below Acceptable baseline conditions are a non-cycling (eg continuous) air dryer with a capacity of 600 cfm or below The replacement of desiccant deliquescent heat-of-compression membrane or other types of dryers does not qualify under this measure

Variable Speed Air Compressor This type of compressor uses a special drive to control the speed (RPM) of the unit which in turn saves energy compared to a fixed speed equivalent

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 40

No-loss Condensate Drain Air-Entraining Air Nozzle Cycling Refrigerated Thermal Mass Dryer

Compressor Incentive per

Equipment Type Units Quantity Daily Operating Unit

Hours

CA04 Storage Tanks for LoadNo Load Screw

Compressor HP $10 Compressors

CA05 Variable Speed Air Compressor

Compressor HP $30

CA06 Compressed Air System Optimization

Compressor HP $50

Compressed Air System Optimization The submitted optimization measures must be identified in an Air System Audit or equivalent study to be eligible The measures must demonstrate energy savings as evaluated by a Program Engineer Additionally measures must also fall under one or more of the category below to be eligible

1) Install storage Receivers (new receivers only replacing existing storage receivers are ineligible)

2) Compressor control (must demonstrate improvement in partial load efficiency of the compress air system including reduceeliminate partially loaded units)

3) Dryer control 4) Source pressure reduction 5) Right-sizing distribution components such as piping filters regulators

connectors and hoses (routine maintenance replacements are ineligible) 6) Leakage detection and repair 7) Eliminate low-efficiency end-usages of compressed air 8) Heat recovery (most reduce electricity consumption of the replaced heat source)

Compressed Air Systems Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 41

lt65000 Btuh

~ 65000 Btuh and lt135000 Btuh

135000 Btuhand lt240000 Btuh

240000 Btuh and lt760000 Btuh

760000 Btuh

154

142

135

125

123

Chiller Capacity Path APath B efficiency (kWton )

lt 150 tons

~150 tons and lt300 tons

300 tons and lt400 tons

400 tons and lt600 tons

600 tons

lt75 tons

~75 tons and lt150 tons

~150 tons and lt300 tons

~300 tons and lt600 tons

600 tons

0610 FU0695 FL and 0550 IPLV0440 IPLV

0610 FU0635 FL and 0550 IPLV0400 IPLV

0560 FU0595 FL and 0520 IPLV0390 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

Path APath B efficiency (kWton )

0750 FU0780 FL and 0600 IPLV0500 IPLV

0720 FU0750 FL and 0560 IPLV0490 IPLV

0660 FU0680 FL and 0540 IPLV0440 IPLV

0610 FU0625 FL and 0520 IPLV0410 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

Data Centers Data Center incentives are available for facilities ranging in size from office server closets to large standalone facilities

Air Cooled Chiller Path APath B EER (BtuWh) lt150 tons 101 FL97 FL and 137 IPLV158 IPLV ge150 tons 101 FL97 FL and 140 IPLV161 IPLV

Air Cooled Chiller without Condenser Air-cooled chillers without condenser must be rated with matching condensers and comply with air-cooled chiller efficiency requirements

Computer Room Air Conditioner

Computer Room Air Handler Variable Speed Replacing constant speed CRAH with VSD CRAH

Water Cooled Centrifugal Chiller

Water Cooled Positive Displacement or Reciprocating Chiller

Uninterruptible Power Supply Must be Energy Star Certified UPS or have full load efficiency rating

ge948 for 20-100 kVA ge978for ge100 kVA

Mainframe Refresh The rated efficiency of the replacement Mainframes power supply must be at least 8 more

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 42

- Equipment Type Units IncentiveUnit

D1 Air Cooled Chiller Ton $4000 D2 Air Cooled Chiller W ithout Condenser Ton $2000 D3 Computer Room Air Conditioner Ton $3000 D4 Computer Room Air Handler Variable Speed Ton $1000 D5 Water Cooled Centrifugal Chiller Ton $3000 D6 Water Cooled Positive Displacement or Reciprocatin $3000 D7 Uninterruptible Power Supply 20-100 kVA $1000 D8 Uninterruptible Power Supply gt 100 kVA $1000 D9 Mainframe Refresh $2000

D10 Server Refresh $2000 D11 PC Power Managment System $600 D12 HVAC System Optimization $005 D1 3 HoUCold Aisle Containment kWh saved $005 D14 Server Virtualization kW reduction $40000 D1 5 Thin Clients Units $500

efficient compared to the existing Mainframes power supply The replacement Mainframe if Inactive must be decommissioned and removed from the Data Center

Server Refresh Replacement servers must be ENERGY STARreg certified Replacement servers power supply must be 5 more efficiency compared to the power supply of the replaced servers The replaced server must be decommissioned and removed from the data center

HVAC System Optimization Final system must have these features

-Implementation of free cooling by the addition of an economizer system -Conversion of constant speed CRACCRAH into variable speed operations using VFDs and additional control functionalities and -Elevation of exhaust air temperature

HotCold Aisle Containment Includes both Hot and Cold Aisles Installing new containment measures not replacing already existed aisle containment Plenum-only installations not eligible Must result in higher difference between the return air (hot aisle) and supply air (cold aisle) temperatures measured at rack intake and exhaust locations

Server Virtualization Minimum of consolidating 5 Servers virtualized into one Server The virtualized servers if inactive are removed from the Data Center

Thin Clients Must be ENERGY STAR certified thin clients Decommissioned clients are removed from the Data Center

Data Center Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 43

Whole Building Systems Whole Building Systems Approach

The Whole Building Systems approach is intended to encourage integrated energy efficient designs by providing enhanced incentives to the customer who addresses overall energy performance Owners of eligible and qualifying new construction and major renovation projects can receive Whole Building Systems incentives when energy modeling indicates the projectrsquos performance is over 10 better than the ASHRAE 901-2007 Savings from eligible electric end-uses in kilowatt hours define the amount of financial incentive Energy savings achieved through renewable energy sources are not counted toward project energy savings and are not included in the savings basis Incentive reservations obtained during the design phase of a project will be honored for up to 24 months

How to Apply for Whole Building Systems Incentives Before construction begins bull A Pre-notification Application must be submitted documenting the Owners intention to

seek Whole Building Systems incentives bull The Owner must confirm the goals and energy efficiency strategies being pursued by the

design team on the completed Pre-notification Worksheet (Checklist tab) and in the project Summary (Whole Building Performance Summary tab)

bull Submit executable building modeling software files bull Submit the Whole Building Performance Summary worksheet energy simulation model

inputs and outputs and supporting documentation bull Receive confirmation and eligibility notification from the PECO Smart Ideas team and

receive an incentive reservation bull The final incentive paid may differ from the reserved incentive amount The final

incentive will be calculated based on site-verified equipment installation and performance The Owners final application and complete documentation must be received within 6 months of equipment installation or certificate of occupancy whichever is later

bull An executable energy model and model output demonstrating compliance with the criteria of ASHRAE 901-2007 Appendix G will be required and the equipment data sheets LED lighting fixtures must be on the DLC or Energy STAR qualified products list (QPL) to be eligible LED fixtures not on the DLC or Energy STAR QPL has the option of submitting LM79 and LM80 test reports for evaluation against DLC and Energy STAR eligibility criteria

During the construction period bull Owner and design team continue to work closely with their chosen contractor to assure

energy efficiency measures are included and installed in the completed building

When the building is constructed and operational bull Complete the Owner final application Request an equipment verification site visit by the

PECO Smart Ideas team Equipment must be installed and fully operational o Program staff will schedule a site visit and utilize submitted documentation and

measurement tools to verify that the installation follows the submitted energy simulation model

bull When PECO confirms that there are no significant changes to the installed equipment payment of the reserved incentive will be made to the Owner within 6 weeks

bull If changes from the proposed design energy simulation are found the Owner and design team will be notified of the reduced incentive amount a period of 20 calendar days will

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 44

Improvement Incentive per Sq Ft

over Code

~11 to lt20 $0155

~20 to lt30 $0233

~30 to lt40 $0350

~40 to lt60 $0525

~60 $0700

be allowed for supplemental information to be provided if no additional information is received by PECO Smart Ideas team the reduced incentive payments will be made and sent to the Owner if additional clarification and information is available program staff will work diligently to resolve the discrepancies and arrive at a reasonable incentive adjustment with the customer

Payments made by PECO Smart Ideas are final

Customer Eligibility The Owner of the proposed new building project must be a customer of PECO and receive delivery of electric service from PECO to receive kilowatt-hour based incentives Please note that electricity supply can be provided by any vendor

Project Eligibility bull The project must be a new construction or major renovation Major renovations involving

the removal and redesign of at least two building systems (such as interior lighting and mechanical systems) may apply for Whole Building Systems incentives

bull To qualify for incentives projects must demonstrate energy efficiency enhancements that achieve at least 11 improvement in the proposed design versus the standard baseline

bull The Owner must submit a Pre-approval Application to the program at the stage where changes for increased energy efficiency are still feasible and construction has not been completed

bull Projects receiving Whole Building Systems incentives are not eligible to receive other incentives such as the prescriptive or custom program incentives for the same scope

bull Project components that are NOT eligible for consideration as a basis for PECO Smart Ideas include the following o Alternative fuel sources (eg use of gas or oil equipment in lieu of electric) Please note

that combined heat and power (CHP) systems will be incentivized for the electricity they produce

o Renewable energy sources (eg solar wind biomass) bull Ineligible savings include exterior lighting process receptacle miscellaneous loads and

other unregulated end-uses Custom incentives are available for new construction exterior lighting

Whole Building Systems Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 45

Custom Project Specifications Instructions for Energy Savings Calculations for Custom Projects Custom projects must involve measures that result in a reduction in electric energy use (kWh) Electricity savings may result from either efficiency improvements or fuel switching Custom Incentives are based on the first year kilowatt-hour savings Custom applications must be accompanied by detailed engineering calculations that document the annual total energy savings

The following serve as guidelines for the minimum required documentation

Equipment Information Submittals bull A list of the present and proposed equipment and components to be installed

including manufacturerrsquos catalogmodel number bull Manufacturerrsquos specification sheets showing capacities and performance for all major

components

Energy Savings Calculations Provide calculations documenting the predicted energy consumption of the existing (or baseline) and proposed system using appropriate analytical tools and clearly stated assumptions Calculations may be performed by ldquohandrdquo but spreadsheet analysis or more rigorous modeling is preferred All analysis should be provided in electronic format All assumptions such as operating hours existing and proposed equipment operational details must be presented Engineering algorithms and procedures from recognized technical organizations such as ASHRAE SMACNA ANSI etc must be used Use rated performance factors tested under accepted procedures specified by recognized rating agencies such as AHRI ANSI ASTM etc Provide an explanation when equipment performance rating conditions vary from standard conditions

In support of the calculations extensive documentation must be provided that provides the basis for the savings estimates The documentation must provide information on the equipment operating schedule daily and seasonal load profile and baseline AND energy efficient equipment performance at the operating loads Typical documentation for custom projects often includes bull Engineering or architectural drawings and ldquoequipment schedulerdquo sheets bull Component specification sheets that include part load efficiency or performance

factors bull Spreadsheet calculations or inputoutput files and results from system modeling or

other engineering analysis using accepted engineering algorithms and practices bull Log sheets trend logs from a building management system or other operating

documentation that are often necessary to document operating hours and equipment loading and used as a basis for the calculations (in some cases short term monitoring may be required to document the load profile)

bull Control sequence of operations that are necessary where controls play a part in the savings equation

Additional documentation other than that described in the application may be required for program participation Larger projects may also require pre- and post-project sub metering or monitoring of loads andor power input as part of another measurement and verification activity to demonstrate the actual energy savings that are realized

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 46

Baseline for Custom Analysis Where equipment is replaced prior to the end of its rated service life in order to achieve energy savings the existing equipment performance may be used as the baseline in the energy savings calculations Where equipment is replaced due to failure or for other reasons (such as obsolescence or a need for more capacity) the baseline performance used in the savings calculation should be either the minimum performance that would be required by code for that equipment type and application (where a code applies) or the performance of the equipment that would have been selected as the customers standard practice when a code does not apply

Baseline or Existing System Summary On custom worksheet on application form include make model number name plate information (such as operating voltage and rated full load amps) rated capacity quantities equipment condition and age facility operating hours equipment operating schedule and load curves If needed attach separate sheets

All decisions regarding incentives for custom projects are in the sole discretion of PECO

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 47

APPENDIX PROGRAM UPDATES SUMMARY (Q1 2017) Multifamily Nursing Home and Assisted Living retrofit customers need to apply for incentives through the PECO Smart Ideas Multi-Family Program administered by Franklin Energy For more information please contact Taylor Adler at tadlerfranklinenergycom or call 1-844-4BIZ-SAVE Multifamily Nursing Home and Assisted Living new construction customers can proceed with applying for incentives here

Revised Incentives

Data Centers

Measure Incentive Effective Immediately Previous Incentive

Air-cooled chiller for data centers $40ton $10ton Air-cooled chiller without condenser for data centers $20ton $10ton

Computer room air conditioner $30ton $7ton Water-cooled centrifugal chiller for data centers $30ton $5ton Water-cooled positive displacement or reciprocating chiller for data centers

$30ton $5ton

Uninterruptible power supply 20-100 kVA $10kVA $6kVA Uninterruptible power supply gt100 kVA $10kVA $1kVA Mainframe refresh $20kW installed $5kW installed Server refresh $20kW installed $4kW installed Server virtualization $400kW reduction $4kW reduction Thin clients $5units $4units

Lighting (Effective Immediately)

Measure Incentive Effective Immediately Specification Previous

Incentive Specification

New construction exterior LED outdoor flood light LED parking garage and canopy lighting LED polearm mounted parking and roadway lighting LED wall mount fixture

$005kWh (custom)

Lighting Power Density (LPD) Requirements Unchanged

$10-54 fixture

Lighting Power Density (LPD) (Wft2) by Space Type or Building Area

LED Replacement Lamps (Tubes) 2

$250lamp 5 Min Watts Reduced

$250lamp 6 Min Watts Reduced

LED Replacement Lamps (Tubes) 4

$400lamp 10 Min Watts Reduced

$400lamp 12 Min Watts Reduced

Permanent Fixture Removal $010Watt removed

Clarification of calculation to represent actual Wattage removed

$010Watt removed

Lighting (Effective 6117)

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 48

Measure Incentive Effective 6117 Specification Previous

Incentive Previous Specification

Interior LED high-bay fixtures andor retrofit kits if lt 20000 LED Lumens

$50fixture 150 Min Watts Reduced

$75fixture 150 Min Watts Reduced

Interior LED high-bay fixtures andor retrofit kits if gt 20000 LED Lumens

$75fixture 225 Min Watts Reduced

$75fixture 150 Min Watts Reduced

New Incentives

Compressed Air

Measure New Incentive Effective Immediately Variable speed air compressor $30compressor HP Compressed air system optimization $50compressor HP

HVAC

Measure New Incentive Effective Immediately ECM circulation pump $50pump Retro-commissioning cooling systems $750ton Retro-commissioning whole building $010square foot Energy management system $25ton Demand controlled ventilation $25ton Water-cooled air conditioner $22ton

Food Service

Measure New Incentive Effective Immediately Combination oven $200unit ENERGY STARreg commercial convection oven $150unit ENERGY STARreg commercial fryers $100unit ENERGY STARreg commercial hot holding cabinet $200unit

Refrigeration

Measure New Incentive Effective Immediately Air-cooled refrigeration condenser $10ton Oversized condenser with VFD $10ton Case light occupancy controls $750door

Lighting

Measure New Incentive Effective Immediately Interior central lighting controls $00175sq foot

Motors and Drives

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 49

-

Measure New Incentive Effective Immediately VFD for dust collection system motor $50HP

Application Clarifications and Revised Requirements

Clarification of LED Eligibility for New Construction or Retrofit Projects

LED Eligibility is determined by whether lighting products are listed in either the DesignLights Consortium (DLC) Qualified Products List of commercial-grade LED luminaires or the US Environmental Protection Agency database of ENERGY STAR certified products For products not yet listed contractors may submit LM79 and LM80 test reports PECO Smart Ideas engineers will review test reports to determine if the product in question meets performance specifications

Revised W 9 Requirement

W-9 forms EIN numbers are no longer required

Deletion of erroneous statement in New Construction Lighting

The following statement from previous Business Manual has been deleted ldquoThe minimum lighting power density used to calculate the incentive shall be no lower than 50 of the ASHRAE 901-2007 valuerdquo

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 50

  • Commercial amp Industrial Program Application Manual
    • Follow This Easy Process
      • Pre-Approval Application Checklist
      • Final Application Checklist
          • Terms and Conditions
            • Program Effective Dates
            • Program and Project Eligibility
            • Incentive Payment Limits
            • Application Review Process
            • Inspections andor PUCrsquos Statewide Program Evaluation
            • Requirements for Custom Project Electricity Savings Calculation
            • Tax Liability
            • No Endorsement
            • Warranties
            • Limitation of Liability
            • Assignment
            • Customerrsquos Certification
            • Termination
            • Acknowledgement
              • Retrofit Lighting Solutions
                • General Linear Fluorescent Lamp and Ballast Specification Requirements
                • LED Lamps and Fixtures
                • Minimum Watts Reduced
                • Linear LED (Tubes)
                • Permanent Fixture Removal
                  • LED Traffic Signals
                    • LED Traffic Signals Incentive Table
                      • New Construction Lighting Specifications
                        • New Construction Lighting Incentives Table
                          • New Construction Lighting Power Density Code
                              • Exterior New Construction Lighting
                              • HVAC Equipment
                                • Air-Source Air Conditioners and Air-Source Heat Pumps
                                • Package Terminal Systems (Replacements)
                                • Ductless Mini-Split Heat Pump lt54 Tons
                                • Geothermal Heat Pump
                                  • Other HVAC Equipment
                                    • Hotel Guest Room Occupancy Sensor
                                    • ECM Circulation Fan
                                    • ECM Circulation Pump
                                    • Retrocomissioning Cooling Systems
                                    • Retrocomissioning Whole Building
                                    • Energy Management System
                                    • Demand Controlled Ventilation
                                    • Other HVAC Incentives Table
                                      • Unitary HVAC Chillers
                                        • Air-Cooled Chillers Water Cooled Positive Displacement Reciprocating Chillers and Water Cooled Centrifugal Chillers
                                          • Refrigeration
                                            • Anti-Sweat Heater Controls
                                            • Evaporator Fan Controls
                                            • Floating Head Pressure Controls
                                            • Automatic Door Closers for Walk-In Coolers and Freezers
                                            • EC Motor for Walk-inReach-in Refrigerated cases or Freezer cases
                                            • ENERGY STAR Solid Door Freezer and Glass Door Freezer and Refrigerators
                                            • Refrigeration Suction Pipe Insulation
                                            • Night Cover
                                            • Strip Curtain on Walk-In CoolerFreezer
                                            • Evaporator Coil Defrost Control
                                            • Variable Speed Refrigeration Compressor
                                            • Add Doors to Open Refrigerated Cases
                                            • Door Gaskets
                                            • Zero Energy Doors
                                            • Air Cooled Refrigeration Condenser
                                            • Oversized Condenser with VFD
                                            • Case Light Occupancy Controls
                                            • LED Open Case Lighting
                                            • LED Enclosed Case Lighting Refrigerated
                                            • LED Enclosed Case Lighting Freezer
                                              • Food Service
                                                • Beverage and Snack Machine Controls
                                                • ENERGY STARreg Refrigerated Beverage Vending Machines
                                                • ENERGY STARreg Electric Steam Cooker
                                                • ENERGY STARreg Electric Combination Oven
                                                • ENERGY STARreg Commercial Convection Oven
                                                • ENERGY STARreg Commercial Fryers
                                                • ENERGY STARreg Commercial Hot Holding Cabinet
                                                  • Motors and Variable Frequency Drives
                                                    • Early Replacement Motors
                                                    • Variable Frequency Drives on HVAC Fan Applications
                                                    • Variable Frequency Drives on Pump Applications
                                                    • Variable Speed Control for Kitchen Exhaust Hoods
                                                    • Variable Speed Drives for Process or Other Equipment
                                                      • Domestic Hot Water
                                                        • Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater
                                                        • Heat Pump Water Heater
                                                        • Low Flow Pre-Rinse Spray Valve
                                                        • Domestic Hot Water Incentive Table
                                                          • Compressed Air Systems
                                                            • No-loss Condensate Drain
                                                            • Air-Entraining air nozzle
                                                            • Storage Tanks for LoadNo Load Screw Compressors
                                                            • Cycling Refrigerated Thermal Mass Dryer
                                                            • Variable Speed Air Compressor
                                                            • Compressed Air System Optimization
                                                            • Compressed Air Systems Incentive Table
                                                              • Data Centers
                                                                • Air Cooled Chiller
                                                                • Air Cooled Chiller without Condenser
                                                                • Computer Room Air Conditioner
                                                                • Computer Room Air Handler Variable Speed
                                                                  • Replacing constant speed CRAH with VSD CRAH
                                                                    • Water Cooled Centrifugal Chiller
                                                                    • Water Cooled Positive Displacement or Reciprocating Chiller
                                                                    • Uninterruptible Power Supply
                                                                    • Mainframe Refresh
                                                                    • Server Refresh
                                                                      • Whole Building Systems
                                                                        • Whole Building Systems Approach
                                                                        • How to Apply for Whole Building Systems Incentives
                                                                        • Customer Eligibility
                                                                        • Project Eligibility
                                                                        • Whole Building Systems Incentives Table
                                                                          • Custom Project Specifications
                                                                            • Instructions for Energy Savings Calculations for Custom Projects
                                                                            • Equipment Information Submittals
                                                                            • Energy Savings Calculations
                                                                            • Baseline for Custom Analysis
                                                                            • Baseline or Existing System Summary

New Construction Lighting Power Density CodeRequirements ndash Building Area Method

Building Area Type 221 LPD (Wft2)

Automotive facility 09

Convention center 12

Courthouse 12

Dining bar loungeleisure 13

Dining cafeteriafast food 14

Dining family 16

Dormitory 1

Exercise center 1

Gymnasium 11

Health-care clinic 1

Hospital 12

Hotel 1

Library 13

Manufacturing facility 13

Motel 1

Motion picture theater 12

Building Area Type LPD (Wft2)

Multifamily 07

Museum 11

Office 1

Parking garage 03

Penitentiary 1

Performing arts theater 16

Policefire station 1

Post office 11

Religious building 13

Retail 15

Schooluniversity 12

Sports arena 11

Town hall 11

Transportation 1

Warehouse 08

Workshop 14

221 In cases where both a common space type and a building specific type are listed the building specific space type shall apply

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 22

Exterior New Construction LightingExterior New Construction savings over code lighting power density will be incentivized using custom lighting measure at $005kWh rate Participants must submit exterior lighting plans Submittals COMCHECK REPORT and lighting schedule for exterior lighting Savings are calculated from the LPD (Wsq ft) indicated below Additional information may be required based on the building exterior type and space description indicated below To contribute to incentive LEDs must satisfy program requirements for DLC Energy Star or equivalent listing

Required Documentation bull COMcheck Interior Lighting Report or equivalent analysis demonstrating space-by-space or

building area calculations bull Drawings showing lighting fixture layout bull Lighting fixture schedule sheet including fixture counts bull Fixture submittal or specification sheets showing model number and rated fixture wattage

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 23

Building Exterior Space Description LPD

Unco erect Pariki Ilg Area Parlurng ots arnd Drives 0 15 WfW

B i ing Grournds W al 1Yays lless Hlan 11] e 10 Wltirneru- 00

W a Nays 10 middot de or greater 112 W

Plaza a reas

Spec rest re areas

Stainh1ays 1ow 2

B i ing 8ntrames and Exits Ma efilbies m wr near foot of door width

Other doors 2o w 1r ear foot of door width

Ctmqpies and Overhimgs Free starndillg and a ched tmd 12s w m2 m bullerhangs

0 door sales Op en areas (ind udi Ilg ve id e sales 05 W lo )

street frontage far vehicle sales lots 21] W linear toot in addi middot on to open are-0bullmiddot lo~nce

B i ing facades 0 2 W tfl2 middot or eacil illumirnated N311 or surface

o r 5 0 Wllinear root fo r eac h m n inated N3l1 o r

surface length

Automated te lle r rnachmiddot es a lld 210 W per loca tion plus 91] night deposito liies W 1pernddiliorml A I middot per

1oca middot om

Eirltrances and gatehouse inspecliion 125 W ffl2 o middot uncovered slatiaBS a goo~ ed acir ies area

Load ing are-0s or law enforcement 0 5 W 2 of u rnco1bullered area fire ambu rnce and otiher emergency service ibullehmiddotctes

Drive-through w indOWs a taslrood 400 W per drive-Hlrough restaurants

Parking near 24 -h our retail 80111 W per main entry entmn ces

HVAC Equipment Air-Source Air Conditioners and Air-Source Heat Pumps New unitary air conditioning units or air source heat pumps that meet or exceed the qualifying cooling efficiency shown in the HVAC Incentives Worksheet are eligible for an incentive They can be either split systems or single package units The efficiency of split systems is based on an ARI reference number All packaged and split system cooling equipment must meet Air Conditioning and Refrigeration Institute (ARI) standards (210240 320 or 340360) be UL listed use a minimum ozone-depleting refrigerant (eg HCFC or HFC) All required efficiencies are based on the Consortium for Energy Efficiency (CEE) high-efficiency commercial air conditioning and heat pump specifications (wwwcee1org) A manufacturerrsquos specification sheet indicating the system efficiency must accompany the application Disposal of the existing unit

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 24

must comply with local codes and ordinances

Package Terminal Systems (Replacements) Package terminal air conditioners and packaged terminal heat pumps are through-the-wall self-contained units that are 2 tons (24000 Btuh) or less All EER values must be rated at 95degF outdoor dry-bulb temperature

Ductless Mini-Split Heat Pump lt54 Tons Incentives are offered for Ductless Mini-Split Heat Pump lt54 Tons with SEER rating greater than or equal to 120 and EER greater than or equal to 145 and HSPF greater than or equal to 90

Geothermal Heat Pump Geothermal equipment is a high-efficiency groundwater source water source or ground source heat pump system that meets or exceeds the energy efficiency requirements shown in the tables below These measures do not apply to heat pump systems coupled with non-heat pump systems such as chillers rooftop AC units boilers or cooling towers which must be filed as custom measures All HVAC applications other than comfort cooling and heating such as process cooling must also be applied for as custom measures

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 25

HVAC Heating Qualifying Incentive

Equipment Type and Cooling Capacity Cooling Qualifying Efficiency ($ per cooling Measure Code Efficiency

ton)

Air Cooled Air Conditioner

H01 lt 54 tons (lt 65000 Btuhr) 15 SEER NA $22

H02 lt 54 and lt 11 25 tons

125 IEER $22 (lt 65 000 Btuh and lt 135 000 Btuhr) NA

H03 lt11 25 and lt 20 tons

123 IEER NA $22 (lt 135000 Btuh and lt 240000 Btuhr)

H04 lt 20 and lt 6333 tons (~

11 1 IEER NA $22 240000 Btuh and lt 760000 Btuhr)

HOS ~ 6333 Ions (~ 760000 Btuhr) 103 IEER NA $22

Air Cooled Heat Pumps

H06 lt 54 tons (lt 65000 Btuhr) 143 SEER 87 HSPF $30

H07 lt 54 and lt 11 25 tons

123 IEER 3 3 COP $30 (lt 65000 Btuh and lt 135000 Btuhr)

HOS lt11 25 and lt 20 tons

1U IEER 3 2 COP $30 (lt 135000 Btuh and lt 240000 Btuhr)

H09 lt 2000 tons (240000 Btuhr) 105 IEER 3 2 COP $30

Packaged Terminal Systems (PTAC and PTHP) (PTHP only)

H10 lt 8000 Btuhr (lt066 tons) 11 8 EER 33 $17

H11 ~8000 and lt10500 Btuhr (~066 and lt 0875 tons) 11 4 EER 32 $17

H12 gt10500 Btuhr ( 875 tons) 107 EER 31 $17

H22 lt 54 tons (lt 65000 Btuhr) 121 EER 12 3 IEER NA $22

lt 54 and lt 11 25 tons 121 EER 12 3 IEER $22 H23

(lt 65000 Btuh and lt 135000 Btuhr) NA

H24 lt11 25 and lt 20 tons

120 EER 12 2 IEER $22 (lt 135000 Btuh and lt 240000 Btuhr) NA

H25 lt20 and lt 633 tons

119 EER 12 2 IEER $22 (lt 240000 Btuh and lt 760000 Btuhr) NA

H26 ~ 633 tons( lt760000 Btuhr) 110 EER 11 1 IEER NA

$22

HVAC Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 26

Other HVAC EquipmentHotel Guest Room Occupancy Sensor Incentives are offered for occupancy-based controls that control electric air conditioning air source heat pumps and or electric heating units for individual hotel rooms Systems with nonshyelectric heat are not eligible Sensors must be controlled by automatic occupancy detectors or a key-card system and the default setting for controlled units differ by at least 5 degrees (or shut the unit fan and heating or cooling off completely) from the operating set point during unshyoccupied periods The control system may also be tied into other electric loads such as lighting and plug loads to shut them off when occupancy is not sensed The incentive is per room Replacement or upgrades of existing occupancy-based controls are not eligible as a prescriptive incentive

Economizer Integrated Dual Enthalpy Economizer ControlsThis measure is targeted to non-residential establishments whose HVAC equipment is not equipped with a functional economizer

Circulation Fan High-Volume Low-SpeedFans must be greater than 16 feet in diameter and have variable speed control

ECM Circulation Fan This measure is targeted to non-residential customers whose air handling equipment currently uses a SP or PSC fan motor rather than an ECM This measure applies only to circulating fan motors of 1 HP or less Above 1 HP motors are governed by NEMA standards and would see little to no efficiency benefit by adding an ECM The targeted fan can supply heating or cooling only or both heating and cooling

ECM Circulation Pump This measure is targeted for replacement of a shaded pole or permanent split capacitor pump or motor with an electronically commutated pump or motor le75 HP

Retrocomissioning Cooling Systems Confined to chiller plant andor isolated packaged units For reservation must contain proposal with defined scope at equipment level that demonstrates energy savings For final approval required final commissioning report including raw data (TAB reports) demonstrating actual scope

This prescriptive measure can be used for facilities with maximum cooling demand less than 1687 tons Larger systems require the use of custom HVAC measure

Retrocomissioning Whole Building Covers all relevant major mechanical systems such as chiller plant air side systems compressed air andor process systems For reservation must contain proposal with defined scope at equipment level that demonstrates energy savings For final approval required final commissioning report including raw data (TAB reports) demonstrating actual scope

This prescriptive measure can be used for facilities less than 404858 square feet Larger facilities require the use of custom HVAC measure

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 27

Energy Management System For installing a web-based building automation system in existing buildings that currently have no digital automated HVAC controls or have outdated pneumatic control systems with inoperable time control functions Existing HVAC control systems must not have time-of-day scheduling Upgrading obsolete EMS HVAC system with inoperable time clock functions will be reviewed on a case-by-case basis for incentive eligibility This incentive cannot be combined with incentives for programmable thermostats or setback-setup controls Must include the controls strategy and a scaled floor-plan with controlled areas highlighted HVAC BAS systems must be new and include bull Central time clock control bull Web-based interface with PC-based controls and graphic bull Building performance Tracking bull Open-protocol architecture controls system shall consist of either LonTalk (ANSICEA 7091) or BACNet (ASHRAE ANSI 135) protocol being used between all controlled and controlling devices and every node on the network bull Minimum setback period must exceed 2200 hours per year bull A minimum setback space temperature of at least 10degF when heating and 5degF when cooling bull Ability to adjust schedules and settings remotely over the internet bull Report generation describing energy and operating trends

This prescriptive measure can be used for facilities with maximum cooling demand less than 456 tons Larger systems require the use of custom HVAC measure

Demand Controlled Ventilation New ventilation controls must use carbon dioxide levels to measure occupancy and modify the percentage of outside air based on occupancy levels Only buildings with space heating and cooling requirements are eligible Conditioned spaces must be kept between 65ordmF and 75ordmF during occupied operating hours Carbon dioxide sensors must be installed in conjunction with fully functioning motor operated outside air dampers Dual temperature air-side economizers with zone-level CO2 sensors for rooftop units are eligible

This prescriptive measure can be used for facilities with maximum cooling demand less than 2210 tons Larger systems require the use of custom HVAC measure

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 28

Other HVAC Measures- consult project manual for eligibility specifications HVAC

Measure Incentive Unit Quantity Incentive

Measure Code er Unit

H1 8 Hotel Guest Room Occupancy Sensor Room $20

H1 9 Economizer Integrated Dual Enthalpy Economizer Controls Ton $1 5

H20 Circulation Fan High-Volume Low-Speed Unit $30

H21 ECM Circulation Fan Fan $1 5

H27 ECM Circulation Pump Pump $50

H28 Retrocommissioning Cooling Systems

Ton $750

H29 Retrocommissioning Whole Buidling

Square Foot $010

H29 Energy Management System Ton $2500

H30 Demand Controlled Ventilation Ton $2500

Other HVAC Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 29

Unitary HVAC Chillers

Air-Cooled Chillers Water Cooled Positive Displacement Reciprocating Chillers and Water Cooled Centrifugal Chillers Chiller applications including existing multiple chiller configurations (including redundant or lsquostand-byrsquo chillers) existing chillers serving multiple load groups and chillers in industrial applications are defined as non-standard applications and must follow a site-specific custom protocol $005kWh) rate

Incentives are offered for chillers with an IPLV value (expressed in kW per ton) that is less than or equal to the qualifying efficiency shown in the table below The chiller efficiency rating must be based on ARI Standard 550590-2003 for IPLV conditions The chillers must meet ARI standards 550590-2003 be UL listed and use a minimum ozone-depleting refrigerant (eg HCFC or HFC) The ARI net capacity value should be used to determine the chiller tons A manufacturerrsquos specification sheet with the rated kWton-IPLV or COP-IPLV must accompany the application along with the four point performance data that is the basis for the IPLV The application must include a certification that the chiller is appropriately sized for site design load conditions

Chillers must satisfy efficiency requirements for both full load and IPLV efficiencies for either Path A or Path B The table shows the minimum efficiency ratings to qualify for the prescriptive incentive which must be consistent with the expected operating conditions of the efficient chiller For example if the efficient chiller satisfies Path A and generally performs at part load the appropriate baseline chiller efficiency is the IPLV value under Path A If the efficient chiller satisfies Path B and generally performs at full load the appropriate baseline chiller efficiency is the full load value under Path B Generally chillers operating above 70 percent load for a majority (50 or more) of operating hours should use Path A and chillers below 70 load for the majority of operating hours should use Path B

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 30

C3 lt 75 tons

C4 75 tons and lt 150 tons

cs ~ 150 tons and lt 300 tons C6 ~ 300 tons

Water Cooled Centrifugal Chillers C7 lt 300 tons CB ~ 300 tons and lt 600 tons

C9 ~ 600 tons

Path A

Qualifying Full Load Efficiency

Qualifying IPLV Efficiency

Path B

Qualifying Full Load Efficiency

Qualifying IPLV Efficiency

0780 kWton 0567 kWton 0800 kWton 0540 kWton

0775 kWton 0554 kWton 0790 kWton 0527 kWton

0680 kWton 0522 kWton 0718 kWton 0486 kWton 0620 kWton 0486 kWton 0639 kWton 0441 kWton

0634 kWton 0536 kWton 0639 kWton 0405 kWton 0576 kWton 0494 kWton 0600 kWton 0360 kWton

0570 kWton 0494 kWton 0590 kWton 0360 kWton

I

Incentive ($ton)

$17

$17

Unitary Chiller Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 31

Refrigeration

Anti-Sweat Heater Controls Incentives are offered for devices that sense the relative humidity in the air outside of the display case and cycles or turns off the glass door (if applicable) and frame anti-sweat heaters when the ambient dew point is below a preset set point Technologies that can turn off anti-sweat heaters based on sensing condensation (on the inner glass pane) also qualify Incentive is based on the number of doors

Evaporator Fan Controls This measure is for the installation of controls in medium temperature walk-in coolers The controller reduces airflow of the evaporator fans when there is no refrigerant flow The measure must control a minimum of 120 HP where fans operate continuously at full speed The measure also must reduce fan motor power by at least 75 during the off cycle This measure is not applicable if any of the following conditions apply 1) Compressor runs all the time with high duty cycle 2) Evaporator fan does not run at full speed all the time 3) Evaporator fan motor runs on poly-phase power 4) Evaporator fan motor is not shaded-pole or permanent split capacitor (PSC) 5) Evaporator fan does not use off-cycle or time-off defrost

Floating Head Pressure Controls Controls must vary head pressure to adjust condensing temperatures in relation to outdoor air temperature Must replace existing constant pressure or manually controlled systems to achieve reduced head pressure in order to maintain a minimum saturated condensing temperature of 70 degF or a 20 degF variance below design heat pressure during mild weather conditions Compressor size must be at least 5 HP

Automatic Door Closers for Walk-In Coolers and Freezers The auto-closer should be applied to the main insulated opaque door(s) of a walk-in cooler or freezer The auto-closer must be able to firmly close that door when it is within one inch of full closure This must be a newly installed automatic door closer replacements on previously installed door closers are not eligible for an incentive

EC Motor for Walk-inReach-in Refrigerated cases or Freezer cases Incentives are offered for replacement of an existing standard-efficiency shaded-pole or permanent split capacitor evaporator fan motor in refrigerated display cases or fan coil in walk-ins The replacement unit must be an Electronically Commutated Motor (ECM) This measure cannot be used in conjunction with the Evaporator Fan Controller measure

ENERGY STAR Solid Door Freezer and Glass Door Freezer and Refrigerators Incentives are offered for replacement of existing self-contained refrigerators and freezers with units that are ENERGY STARreg listed Only units with built-in refrigeration systems are qualified Units with remote refrigeration systems or units do not qualify Customers must provide proof that the appliance meets the CEE or ENERGY STAR efficiency specifications using ASHRAE Standard 72-2005 (38degF plusmn 2degF) Incentive is per unit

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 32

Refrigeration Suction Pipe Insulation 1 Must insulate bare refrigeration suction lines of 1 58 inches in diameter or less on existing equipment only 2 Cooler lines require frac34 inch of flexible closed-cell nitrite rubber or an equivalent insulation 3 Freezer lines require 1-inch of flexible closed-cell nitrite rubber or an equivalent insulation 4 Insulation exposed to the outdoors must be protected from the weather (ie jacketed with a medium-gauge aluminum jacket)

Night Cover 1 Must install a cover on an existing open refrigerated display case to decrease its cooling load during off hours 2 The equipment manufacturer must not object to the use of night covers for the existing display case model 3 This rebate is based on the linear footage of the installed 4 The cover must be applied for a period of at least six hours

Strip Curtain on Walk-In CoolerFreezer 1 New strip curtains or plastic swinging doors must be installed on doorways of refrigerated spaces (conditioned to less than 50deg F) 2 Rebate is based on the linear footage of the doorway that the strip curtains are being installed in 3 Opening between the strip curtain and bottom of doorway must be no larger than 1 inch 4 Strips must have an overlay greater than 1 inch

Evaporator Coil Defrost Control 1The current system must include an operating electric defrost system with a functional electroshymechanical time clock 2 Evaporator coil temperature and pressure must be monitored by controller in order to determine optimal defrost cycles 3 New intelligent control systems to control the defrost systems will typically replace timed- defrost controls

Variable Speed Refrigeration Compressor This measure VSD control for refrigeration systems and its eligibility targets applies to retrofit construction in the commercial and industrial building sectors it is most applicable to grocery stores or food processing applications with refrigeration systems This protocol is for a VSD control system replacing a slide valve control system

Add Doors to Open Refrigerated Cases The eligible retrofit equipment is either no sweat doors or doors with anti-sweat heaters If a lighting retrofit is included with the new doors it must consume the same amount of energy or less energy than the old lighting Upgrades to lighting or other system components should be processed separately Horizontal cases are not eligible and should be processed as custom

Door Gaskets PECO Smart Ideas For Your Business CampI Program Application Manual

Q1 2017 pg 33

This measure is applicable to commercial refrigeration and applies to the replacement of worn-out gaskets with new better-fitting gaskets Applicable gaskets include those located on the doors of walk-in andor reach-in coolers and freezers This protocol applies to the main doors of both low temperature (ldquofreezerrdquo ndash below 32 degF) and medium temperature (ldquocoolerrdquo ndash above 32 degF) walk-ins

Zero Energy Doors For this measure a no-heatlow-heat clear glass door must be installed on an upright display case It is limited to door heights of 57 inches or more Doors must have either heat reflective treated glass be gas filled or both This measure applies to low temperature cases onlymdashthose with a case temperature below 0degF Doors must have 3 or more panes Total door rail glass and frame heater amperage ( 120 volt) cannot exceed 039413 amps per door for low temperature display cases Rebate is based on the door width (not including case frame)

Air Cooled Refrigeration Condenser Approach temperature lt8F for low temperature loads lt13F for medium temperature loads

Oversized Condenser with VFD New standalone condenser must no more than 150 larger than load

Case Light Occupancy Controls Acceptable for freezer or refrigerated cases as well as open cases or cases with doors

LED Open Case Lighting For replacing open case T8 or T12 fluorescent fixtures with DLC listed LEDs on refrigerators coolers and freezers

LED Enclosed Case Lighting Refrigerated LED case lighting with or without motion sensors on enclosed refrigerated vertical displays The baseline equipment is assumed to be cases with uncontrolled T8 or T12 linear fluorescent lamps

LED Enclosed Case Lighting Freezer LED case lighting with or without motion sensors on enclosed freezer vertical displays The baseline equipment is assumed to be cases with uncontrolled T8 or T12 linear fluorescent lamps

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 34

Refrigeration Measures Ref Measure

Measure Incentive Unit IncentiveUnit Code R01 Anti-Sweat Heater Controls Door $30

R02 Evaporator Fan Controls Controller $50

R03 Floating-head Pressure Controls HP $20

R04 Automatic Door Closers fo r Walk-in Coolers Door $75

R05 Automatic Door Closers fo r Walk-in Freezers Door $75

R06 Evaporator Fan EC Motor fo r Reach- in Cases Motor $35

RO Evaporator Fan EC Motor fo r Walk-in Cases Motor $50

R08 ENERGY STARreg Glass Door Freezer lt15 Cu Ft Unit $100

R09 ENERGY STARreg Glass Door Freezer 15- 49 Cu Ft Unit $125

R10 ENERGY STARreg Glass Door Freezer ~ 50 Cu Ft Unit $145

R11 ENERGY STARreg Solid Door Freezer Unit $75

R12 ENERGY STARreg Glass Door Refrigerator lt50 Cu Ft Unit $30

R13 ENERGY STARreg Glass Door Refrigerator gt= 50 Cu Ft Unit $50

K14 t NtKGY ~ I AKreg ~Olld Uoor Ketngerator $ OU Cu t-t Unit $~0

R15 Suction Pipe Insulation Walk-in Coolers Linear Foot $050

R16 Suction Pipe Insulation Walk in Freezers Linear Foot $075

R17 Night Cover Linear Foot $800

R18 Strip Curtains on Walk-in Cooler Linear Foot $250

R19 Evaporator Coil Defrost Control Controller $7500

R20 Variable Speed Refrigeration Compressor Compressor $85

R21 Add Doors to Open Refrigerated Cases Door $55

R22 Door Gaskets Door $250

R23 Zero Energy Doors Door $50

R24 A ir Cooled Refrigeration Condenser Ton $10

R25 Oversized Condenser with VFD Ton $10

R26 Case Light Occupancy Controls Door $8

R27 LED Open Cose Lighting Cose $10

R28 LED Enclosed Case Lighting Refrigerated Door $30

R30 LED Enclosed Case Lighting Freezer Door $30

Refrigeration Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 35

Food Service Beverage and Snack Machine Controls Incentives are offered for refrigerated vending machines that contain non-perishable bottled and canned beverages Controller for both types of systems must include a passive infrared occupancy sensor to turn off fluorescent lights and other energized machine systems when the surrounding area is unoccupied for 15 minutes or longer For the refrigerated machines the control logic may include periodic power up at 2-hour intervals or longer to maintain product temperature and provide compressor protection

ENERGY STARreg Refrigerated Beverage Vending Machines Incentives are offered for ENERGY STARreg beverage vending machines Qualifying machines can be found at httpswwwenergystargovproductsothervending_machines

ENERGY STARreg Electric Steam Cooker This measure applies to the installation of electric ENERGY STAR steam cookers as either a new item or replacement for an existing unit Gas steam cookers are not eligible The steam cookers must meet minimum ENERGY STAR efficiency requirements A qualifying steam cooker must meet a minimum cooking efficiency of 50 percent and meet idle energy rates specified by pan capacity

ENERGY STARreg Electric Combination Oven This measure applies to electric ovens capable of handling single 12 x 20 x 25 pan per rack

ENERGY STARreg Commercial Convection Oven The oven must meet or exceed heavy load potato cooking energy efficiency of greater than 70 utilizing ASTM Standard F149 Applies only to electric ovens

ENERGY STARreg Commercial Fryers The commercial fryer must have a tested heavy load (French fry for large vats) cooking energy efficiency of greater than 80 utilizing American Society for Testing and Materials (ASTM) Standard F1361 for commercial fryers and ASTM Standard F2144 for large vat fryers Multiple vat configurations are paid per qualifying vat ENERGY STAR maintains a list of qualifying products and specifications at httpwwwenergystargov

ENERGY STARreg Commercial Hot Holding Cabinet Energy STAR rating electric

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 36

Food Service amp Other Measures FoodOther

Measure Incentive Unit Incentive

Measure Code Unit

F01 Beverage Machine Controls Unit $25

F02 Snack Machine Controls Unit $20

F03 ENERGY STARreg Refrigerated Beverage Vending Machir Unit $125

F04 ENERGY STARreg Commerc ial Steam Cooker Unit $200

F05 ENERGY STARreg Electric Combination Oven Unit $200

F06 ENERGY STARreg Commercial Electric Convection Oven Unit $150

F07 ENERGY STARreg Commerc ial Fryers Unit $100

F08 ENERGY STARregCommerc ial Hot Holding Cabinet Unit $200

Food Service Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 37

Motors and Variable Frequency DrivesEarly Replacement Motors For constant speed and uniformly loaded motors this measure applies to the replacement of old motors with new energy efficient motors of the same rated horsepower Old motors must be less than 15 years Replacements where the old motor and new motor have different horsepower ratings are considered custom measures Motors with variable speeds variable loading or industrial-specific applications are also considered custom measures

Motors Incentive Table Motors

Measure Code

HP Incentive per Motor

M01 15 - 10 $40 M02 11 - 50 $100 M03 51-100 $150 M04 gt100 $300

Only VFDs on unitary systems are eligible Non-unitary systems must be submitted as a custom measure Soft start motors are not eligible

Variable Frequency Drives on HVAC Fan Applications Incentives are offered for installing VFDs on existing HVAC fans that do not have pre-existing VFDs This measure applies to HVAC supply and return fans only All other fans including cooling tower fans must be submitted as custom measures Manually fixed speed settings on HVAC fans must be submitted via custom application The VFD must control motor speed automatically in response to pressure flow temperature or other variable signal The installation of a VSD must accompany the permanent removal or disabling of any throttling devices such as inlet vanes bypass dampers and throttling valves etc The incentive is offered per controlled HP

Variable Frequency Drives on Pump Applications Incentives are offered for installing VFDs on existing chilled water pumps and heating hot water pumps that do not have existing VFDs This measure applies to chilled water pumps and heating hot water pumps only All other pumps must be submitted as custom measures Manually fixed speed settings on pumps must be submitted via custom application The VFD must control motor speed automatically in response to pressure flow temperature or other variable signal The installation of a VSD must accompany the permanent removal or disabling of any throttling devices such as throttling valves The incentive is offered per controlled HP

Variable Speed Control for Kitchen Exhaust Hoods The measure consists of installing a new VSD in conjunction with a sensor control system that varies the exhaust rate of kitchen ventilation (exhaust andor makeup air fans) based on the heat and effluent output from the cooking appliances (ie the more heat and smokevapors generated the more ventilation needed) This involves installing a temperature sensor in the hood exhaust collar andor an optic sensor on the end of the hood that senses cooking conditions and allows the system to automatically vary the rate of exhaust to match requirements by adjusting the fan speed accordingly

Variable Speed Drives for Process or Other Equipment VFD must be used in conjunction with a process (non HVAC) application To qualify for this incentive the driven equipment must operate at least 2000 hours per year Redundant or back- up units do not qualify VFDs replacing existing VFDs do not qualify The VFD must control motor

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 38

speed automatically in response to pressure flow temperature or other variable signal VFDs installed as ldquosoft startrdquo without automatic manual closed loop speed control do not qualify The installation of a VFD must accompany the permanent removal or disabling of any throttling devices such as throttling valves The incentive is per controlled HP and only applies to controlled motors less than 50 HP

VSDVFD Incentives Table VFD

Measure Code

Measure Unit Incentive per Unit

Fan Application

V01 VFD on HVAC Fan HP $25 Pump Application

Variable Speed Control for Kitchen Exhaust Hoods

Variable Speed Drives for Process or Other Equipment

V02 VFD on Chilled Water Pumps HP $25 V03 VFD on Heating Hot Water Pumps HP $25

V04 Kitchen Exhaust Fan Retrofit Hood HP $500

V05 Process Motor lt 50 HP HP $50

Domestic Hot Water Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater This measure documents the energy savings attributed to converting from a standard electric water heater to an ENERGY STAR natural gaspropane-fired water heater or a standard oil-fired water heater with an Energy Factor of 0585

Heat Pump Water Heater This includes heat pump water heaters with energy factors meeting ENERGY STAR criteria The measure described here involves a direct retrofit of a resistive electric water heater with a heat pump water heater It does not cover systems where the heat pump is a pre-heater or is combined with other water heating sources More complicated installations can be treated as custom projects

Low Flow Pre-Rinse Spray Valve This measure applies to efficient low flow pre-rinse sprayers in grocery and food service applications The most likely areas of application are kitchens in restaurants and hotels Only premises with electric water heating may qualify for this incentive In addition the replacement pre-rinse spray nozzle must use less than 16 gallons per minute with a cleanability performance of 26 seconds per plate or less Low flow pre-rinse sprayers reduce hot water usage and save energy associated with water heating

Domestic Hot Water Incentive Table

Measure Code Measure Unit Retrofit Incentive per

Unit

W01 Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater Unit $100

W02 Heat Pump Water Heater Unit $100 W03 Low-Flow Pre-Rinse Spray Valve Valve $17

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 39

Compressed Air SystemsNo-loss Condensate Drain No-loss Condensate Drains are controlled by a sensor that monitors the level of condensate and only open when there is a need to drain condensate They close before compressed air is allowed to escape This measure is targeted to non-residential customers whose equipment is a timed drain that operates on a pre-set schedule Acceptable baseline conditions are compressed air systems with standard condensate drains operated by a solenoid and timer

Air-Entraining air nozzle This measure is targeted to non-residential customers whose compressed air equipment uses stationary air nozzles in a production application with an open copper tube of 18rdquo or 14rdquo orifice diameter Energy efficient conditions require replacement of an inefficient non-air entraining air nozzle with an energy efficient air-entraining air nozzle that use less than 15 CFM at 100 psi for industrial applications

Storage Tanks for LoadNo Load Screw Compressors This measure protocol applies to the installation of air receivers with pressureflow controls to loadno load compressors Loadno load compressors unload when there is low demand The process of unloading is done over a period of time to avoid foaming of the lubrication oil Using a storage tank with pressureflow control will buffer the air demands on the compressor Reducing the number of cycles in turn reduces the number of transition times from load to no load and saves energy The baseline equipment is a loadno load compressor with a 1 galcfm storage ratio or a modulating compressor with blowdown The high efficiency equipment is a loadno load compressor with a minimum storage ratio of 4 gallons of storage per cfm

Cycling Refrigerated Thermal Mass Dryer When air is compressed water vapor in the air condenses and collects in liquid form Some of this condensate collects in the air distribution system and can contaminate downstream components such as air tools with rust oil and pipe debris Refrigerated air dryers remove the water vapor by cooling the air to its dew point and separating the condensate Changes in production and seasonal variations in ambient air temperature lead to partial loading conditions on the dryer Standard air dryers use a hot gas bypass system that is inefficient at partial loads A Cycling Thermal Mass Dryer uses a thermal storage medium to store cooling capacity when the system is operated at partial loads allowing the dryer refrigerant compressor to cycle

This measure is targeted to non-residential customers whose equipment is a non-cycling refrigerated air dryer with a capacity of 600 cfm or below Acceptable baseline conditions are a non-cycling (eg continuous) air dryer with a capacity of 600 cfm or below The replacement of desiccant deliquescent heat-of-compression membrane or other types of dryers does not qualify under this measure

Variable Speed Air Compressor This type of compressor uses a special drive to control the speed (RPM) of the unit which in turn saves energy compared to a fixed speed equivalent

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 40

No-loss Condensate Drain Air-Entraining Air Nozzle Cycling Refrigerated Thermal Mass Dryer

Compressor Incentive per

Equipment Type Units Quantity Daily Operating Unit

Hours

CA04 Storage Tanks for LoadNo Load Screw

Compressor HP $10 Compressors

CA05 Variable Speed Air Compressor

Compressor HP $30

CA06 Compressed Air System Optimization

Compressor HP $50

Compressed Air System Optimization The submitted optimization measures must be identified in an Air System Audit or equivalent study to be eligible The measures must demonstrate energy savings as evaluated by a Program Engineer Additionally measures must also fall under one or more of the category below to be eligible

1) Install storage Receivers (new receivers only replacing existing storage receivers are ineligible)

2) Compressor control (must demonstrate improvement in partial load efficiency of the compress air system including reduceeliminate partially loaded units)

3) Dryer control 4) Source pressure reduction 5) Right-sizing distribution components such as piping filters regulators

connectors and hoses (routine maintenance replacements are ineligible) 6) Leakage detection and repair 7) Eliminate low-efficiency end-usages of compressed air 8) Heat recovery (most reduce electricity consumption of the replaced heat source)

Compressed Air Systems Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 41

lt65000 Btuh

~ 65000 Btuh and lt135000 Btuh

135000 Btuhand lt240000 Btuh

240000 Btuh and lt760000 Btuh

760000 Btuh

154

142

135

125

123

Chiller Capacity Path APath B efficiency (kWton )

lt 150 tons

~150 tons and lt300 tons

300 tons and lt400 tons

400 tons and lt600 tons

600 tons

lt75 tons

~75 tons and lt150 tons

~150 tons and lt300 tons

~300 tons and lt600 tons

600 tons

0610 FU0695 FL and 0550 IPLV0440 IPLV

0610 FU0635 FL and 0550 IPLV0400 IPLV

0560 FU0595 FL and 0520 IPLV0390 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

Path APath B efficiency (kWton )

0750 FU0780 FL and 0600 IPLV0500 IPLV

0720 FU0750 FL and 0560 IPLV0490 IPLV

0660 FU0680 FL and 0540 IPLV0440 IPLV

0610 FU0625 FL and 0520 IPLV0410 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

Data Centers Data Center incentives are available for facilities ranging in size from office server closets to large standalone facilities

Air Cooled Chiller Path APath B EER (BtuWh) lt150 tons 101 FL97 FL and 137 IPLV158 IPLV ge150 tons 101 FL97 FL and 140 IPLV161 IPLV

Air Cooled Chiller without Condenser Air-cooled chillers without condenser must be rated with matching condensers and comply with air-cooled chiller efficiency requirements

Computer Room Air Conditioner

Computer Room Air Handler Variable Speed Replacing constant speed CRAH with VSD CRAH

Water Cooled Centrifugal Chiller

Water Cooled Positive Displacement or Reciprocating Chiller

Uninterruptible Power Supply Must be Energy Star Certified UPS or have full load efficiency rating

ge948 for 20-100 kVA ge978for ge100 kVA

Mainframe Refresh The rated efficiency of the replacement Mainframes power supply must be at least 8 more

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 42

- Equipment Type Units IncentiveUnit

D1 Air Cooled Chiller Ton $4000 D2 Air Cooled Chiller W ithout Condenser Ton $2000 D3 Computer Room Air Conditioner Ton $3000 D4 Computer Room Air Handler Variable Speed Ton $1000 D5 Water Cooled Centrifugal Chiller Ton $3000 D6 Water Cooled Positive Displacement or Reciprocatin $3000 D7 Uninterruptible Power Supply 20-100 kVA $1000 D8 Uninterruptible Power Supply gt 100 kVA $1000 D9 Mainframe Refresh $2000

D10 Server Refresh $2000 D11 PC Power Managment System $600 D12 HVAC System Optimization $005 D1 3 HoUCold Aisle Containment kWh saved $005 D14 Server Virtualization kW reduction $40000 D1 5 Thin Clients Units $500

efficient compared to the existing Mainframes power supply The replacement Mainframe if Inactive must be decommissioned and removed from the Data Center

Server Refresh Replacement servers must be ENERGY STARreg certified Replacement servers power supply must be 5 more efficiency compared to the power supply of the replaced servers The replaced server must be decommissioned and removed from the data center

HVAC System Optimization Final system must have these features

-Implementation of free cooling by the addition of an economizer system -Conversion of constant speed CRACCRAH into variable speed operations using VFDs and additional control functionalities and -Elevation of exhaust air temperature

HotCold Aisle Containment Includes both Hot and Cold Aisles Installing new containment measures not replacing already existed aisle containment Plenum-only installations not eligible Must result in higher difference between the return air (hot aisle) and supply air (cold aisle) temperatures measured at rack intake and exhaust locations

Server Virtualization Minimum of consolidating 5 Servers virtualized into one Server The virtualized servers if inactive are removed from the Data Center

Thin Clients Must be ENERGY STAR certified thin clients Decommissioned clients are removed from the Data Center

Data Center Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 43

Whole Building Systems Whole Building Systems Approach

The Whole Building Systems approach is intended to encourage integrated energy efficient designs by providing enhanced incentives to the customer who addresses overall energy performance Owners of eligible and qualifying new construction and major renovation projects can receive Whole Building Systems incentives when energy modeling indicates the projectrsquos performance is over 10 better than the ASHRAE 901-2007 Savings from eligible electric end-uses in kilowatt hours define the amount of financial incentive Energy savings achieved through renewable energy sources are not counted toward project energy savings and are not included in the savings basis Incentive reservations obtained during the design phase of a project will be honored for up to 24 months

How to Apply for Whole Building Systems Incentives Before construction begins bull A Pre-notification Application must be submitted documenting the Owners intention to

seek Whole Building Systems incentives bull The Owner must confirm the goals and energy efficiency strategies being pursued by the

design team on the completed Pre-notification Worksheet (Checklist tab) and in the project Summary (Whole Building Performance Summary tab)

bull Submit executable building modeling software files bull Submit the Whole Building Performance Summary worksheet energy simulation model

inputs and outputs and supporting documentation bull Receive confirmation and eligibility notification from the PECO Smart Ideas team and

receive an incentive reservation bull The final incentive paid may differ from the reserved incentive amount The final

incentive will be calculated based on site-verified equipment installation and performance The Owners final application and complete documentation must be received within 6 months of equipment installation or certificate of occupancy whichever is later

bull An executable energy model and model output demonstrating compliance with the criteria of ASHRAE 901-2007 Appendix G will be required and the equipment data sheets LED lighting fixtures must be on the DLC or Energy STAR qualified products list (QPL) to be eligible LED fixtures not on the DLC or Energy STAR QPL has the option of submitting LM79 and LM80 test reports for evaluation against DLC and Energy STAR eligibility criteria

During the construction period bull Owner and design team continue to work closely with their chosen contractor to assure

energy efficiency measures are included and installed in the completed building

When the building is constructed and operational bull Complete the Owner final application Request an equipment verification site visit by the

PECO Smart Ideas team Equipment must be installed and fully operational o Program staff will schedule a site visit and utilize submitted documentation and

measurement tools to verify that the installation follows the submitted energy simulation model

bull When PECO confirms that there are no significant changes to the installed equipment payment of the reserved incentive will be made to the Owner within 6 weeks

bull If changes from the proposed design energy simulation are found the Owner and design team will be notified of the reduced incentive amount a period of 20 calendar days will

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 44

Improvement Incentive per Sq Ft

over Code

~11 to lt20 $0155

~20 to lt30 $0233

~30 to lt40 $0350

~40 to lt60 $0525

~60 $0700

be allowed for supplemental information to be provided if no additional information is received by PECO Smart Ideas team the reduced incentive payments will be made and sent to the Owner if additional clarification and information is available program staff will work diligently to resolve the discrepancies and arrive at a reasonable incentive adjustment with the customer

Payments made by PECO Smart Ideas are final

Customer Eligibility The Owner of the proposed new building project must be a customer of PECO and receive delivery of electric service from PECO to receive kilowatt-hour based incentives Please note that electricity supply can be provided by any vendor

Project Eligibility bull The project must be a new construction or major renovation Major renovations involving

the removal and redesign of at least two building systems (such as interior lighting and mechanical systems) may apply for Whole Building Systems incentives

bull To qualify for incentives projects must demonstrate energy efficiency enhancements that achieve at least 11 improvement in the proposed design versus the standard baseline

bull The Owner must submit a Pre-approval Application to the program at the stage where changes for increased energy efficiency are still feasible and construction has not been completed

bull Projects receiving Whole Building Systems incentives are not eligible to receive other incentives such as the prescriptive or custom program incentives for the same scope

bull Project components that are NOT eligible for consideration as a basis for PECO Smart Ideas include the following o Alternative fuel sources (eg use of gas or oil equipment in lieu of electric) Please note

that combined heat and power (CHP) systems will be incentivized for the electricity they produce

o Renewable energy sources (eg solar wind biomass) bull Ineligible savings include exterior lighting process receptacle miscellaneous loads and

other unregulated end-uses Custom incentives are available for new construction exterior lighting

Whole Building Systems Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 45

Custom Project Specifications Instructions for Energy Savings Calculations for Custom Projects Custom projects must involve measures that result in a reduction in electric energy use (kWh) Electricity savings may result from either efficiency improvements or fuel switching Custom Incentives are based on the first year kilowatt-hour savings Custom applications must be accompanied by detailed engineering calculations that document the annual total energy savings

The following serve as guidelines for the minimum required documentation

Equipment Information Submittals bull A list of the present and proposed equipment and components to be installed

including manufacturerrsquos catalogmodel number bull Manufacturerrsquos specification sheets showing capacities and performance for all major

components

Energy Savings Calculations Provide calculations documenting the predicted energy consumption of the existing (or baseline) and proposed system using appropriate analytical tools and clearly stated assumptions Calculations may be performed by ldquohandrdquo but spreadsheet analysis or more rigorous modeling is preferred All analysis should be provided in electronic format All assumptions such as operating hours existing and proposed equipment operational details must be presented Engineering algorithms and procedures from recognized technical organizations such as ASHRAE SMACNA ANSI etc must be used Use rated performance factors tested under accepted procedures specified by recognized rating agencies such as AHRI ANSI ASTM etc Provide an explanation when equipment performance rating conditions vary from standard conditions

In support of the calculations extensive documentation must be provided that provides the basis for the savings estimates The documentation must provide information on the equipment operating schedule daily and seasonal load profile and baseline AND energy efficient equipment performance at the operating loads Typical documentation for custom projects often includes bull Engineering or architectural drawings and ldquoequipment schedulerdquo sheets bull Component specification sheets that include part load efficiency or performance

factors bull Spreadsheet calculations or inputoutput files and results from system modeling or

other engineering analysis using accepted engineering algorithms and practices bull Log sheets trend logs from a building management system or other operating

documentation that are often necessary to document operating hours and equipment loading and used as a basis for the calculations (in some cases short term monitoring may be required to document the load profile)

bull Control sequence of operations that are necessary where controls play a part in the savings equation

Additional documentation other than that described in the application may be required for program participation Larger projects may also require pre- and post-project sub metering or monitoring of loads andor power input as part of another measurement and verification activity to demonstrate the actual energy savings that are realized

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 46

Baseline for Custom Analysis Where equipment is replaced prior to the end of its rated service life in order to achieve energy savings the existing equipment performance may be used as the baseline in the energy savings calculations Where equipment is replaced due to failure or for other reasons (such as obsolescence or a need for more capacity) the baseline performance used in the savings calculation should be either the minimum performance that would be required by code for that equipment type and application (where a code applies) or the performance of the equipment that would have been selected as the customers standard practice when a code does not apply

Baseline or Existing System Summary On custom worksheet on application form include make model number name plate information (such as operating voltage and rated full load amps) rated capacity quantities equipment condition and age facility operating hours equipment operating schedule and load curves If needed attach separate sheets

All decisions regarding incentives for custom projects are in the sole discretion of PECO

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 47

APPENDIX PROGRAM UPDATES SUMMARY (Q1 2017) Multifamily Nursing Home and Assisted Living retrofit customers need to apply for incentives through the PECO Smart Ideas Multi-Family Program administered by Franklin Energy For more information please contact Taylor Adler at tadlerfranklinenergycom or call 1-844-4BIZ-SAVE Multifamily Nursing Home and Assisted Living new construction customers can proceed with applying for incentives here

Revised Incentives

Data Centers

Measure Incentive Effective Immediately Previous Incentive

Air-cooled chiller for data centers $40ton $10ton Air-cooled chiller without condenser for data centers $20ton $10ton

Computer room air conditioner $30ton $7ton Water-cooled centrifugal chiller for data centers $30ton $5ton Water-cooled positive displacement or reciprocating chiller for data centers

$30ton $5ton

Uninterruptible power supply 20-100 kVA $10kVA $6kVA Uninterruptible power supply gt100 kVA $10kVA $1kVA Mainframe refresh $20kW installed $5kW installed Server refresh $20kW installed $4kW installed Server virtualization $400kW reduction $4kW reduction Thin clients $5units $4units

Lighting (Effective Immediately)

Measure Incentive Effective Immediately Specification Previous

Incentive Specification

New construction exterior LED outdoor flood light LED parking garage and canopy lighting LED polearm mounted parking and roadway lighting LED wall mount fixture

$005kWh (custom)

Lighting Power Density (LPD) Requirements Unchanged

$10-54 fixture

Lighting Power Density (LPD) (Wft2) by Space Type or Building Area

LED Replacement Lamps (Tubes) 2

$250lamp 5 Min Watts Reduced

$250lamp 6 Min Watts Reduced

LED Replacement Lamps (Tubes) 4

$400lamp 10 Min Watts Reduced

$400lamp 12 Min Watts Reduced

Permanent Fixture Removal $010Watt removed

Clarification of calculation to represent actual Wattage removed

$010Watt removed

Lighting (Effective 6117)

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 48

Measure Incentive Effective 6117 Specification Previous

Incentive Previous Specification

Interior LED high-bay fixtures andor retrofit kits if lt 20000 LED Lumens

$50fixture 150 Min Watts Reduced

$75fixture 150 Min Watts Reduced

Interior LED high-bay fixtures andor retrofit kits if gt 20000 LED Lumens

$75fixture 225 Min Watts Reduced

$75fixture 150 Min Watts Reduced

New Incentives

Compressed Air

Measure New Incentive Effective Immediately Variable speed air compressor $30compressor HP Compressed air system optimization $50compressor HP

HVAC

Measure New Incentive Effective Immediately ECM circulation pump $50pump Retro-commissioning cooling systems $750ton Retro-commissioning whole building $010square foot Energy management system $25ton Demand controlled ventilation $25ton Water-cooled air conditioner $22ton

Food Service

Measure New Incentive Effective Immediately Combination oven $200unit ENERGY STARreg commercial convection oven $150unit ENERGY STARreg commercial fryers $100unit ENERGY STARreg commercial hot holding cabinet $200unit

Refrigeration

Measure New Incentive Effective Immediately Air-cooled refrigeration condenser $10ton Oversized condenser with VFD $10ton Case light occupancy controls $750door

Lighting

Measure New Incentive Effective Immediately Interior central lighting controls $00175sq foot

Motors and Drives

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 49

-

Measure New Incentive Effective Immediately VFD for dust collection system motor $50HP

Application Clarifications and Revised Requirements

Clarification of LED Eligibility for New Construction or Retrofit Projects

LED Eligibility is determined by whether lighting products are listed in either the DesignLights Consortium (DLC) Qualified Products List of commercial-grade LED luminaires or the US Environmental Protection Agency database of ENERGY STAR certified products For products not yet listed contractors may submit LM79 and LM80 test reports PECO Smart Ideas engineers will review test reports to determine if the product in question meets performance specifications

Revised W 9 Requirement

W-9 forms EIN numbers are no longer required

Deletion of erroneous statement in New Construction Lighting

The following statement from previous Business Manual has been deleted ldquoThe minimum lighting power density used to calculate the incentive shall be no lower than 50 of the ASHRAE 901-2007 valuerdquo

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 50

  • Commercial amp Industrial Program Application Manual
    • Follow This Easy Process
      • Pre-Approval Application Checklist
      • Final Application Checklist
          • Terms and Conditions
            • Program Effective Dates
            • Program and Project Eligibility
            • Incentive Payment Limits
            • Application Review Process
            • Inspections andor PUCrsquos Statewide Program Evaluation
            • Requirements for Custom Project Electricity Savings Calculation
            • Tax Liability
            • No Endorsement
            • Warranties
            • Limitation of Liability
            • Assignment
            • Customerrsquos Certification
            • Termination
            • Acknowledgement
              • Retrofit Lighting Solutions
                • General Linear Fluorescent Lamp and Ballast Specification Requirements
                • LED Lamps and Fixtures
                • Minimum Watts Reduced
                • Linear LED (Tubes)
                • Permanent Fixture Removal
                  • LED Traffic Signals
                    • LED Traffic Signals Incentive Table
                      • New Construction Lighting Specifications
                        • New Construction Lighting Incentives Table
                          • New Construction Lighting Power Density Code
                              • Exterior New Construction Lighting
                              • HVAC Equipment
                                • Air-Source Air Conditioners and Air-Source Heat Pumps
                                • Package Terminal Systems (Replacements)
                                • Ductless Mini-Split Heat Pump lt54 Tons
                                • Geothermal Heat Pump
                                  • Other HVAC Equipment
                                    • Hotel Guest Room Occupancy Sensor
                                    • ECM Circulation Fan
                                    • ECM Circulation Pump
                                    • Retrocomissioning Cooling Systems
                                    • Retrocomissioning Whole Building
                                    • Energy Management System
                                    • Demand Controlled Ventilation
                                    • Other HVAC Incentives Table
                                      • Unitary HVAC Chillers
                                        • Air-Cooled Chillers Water Cooled Positive Displacement Reciprocating Chillers and Water Cooled Centrifugal Chillers
                                          • Refrigeration
                                            • Anti-Sweat Heater Controls
                                            • Evaporator Fan Controls
                                            • Floating Head Pressure Controls
                                            • Automatic Door Closers for Walk-In Coolers and Freezers
                                            • EC Motor for Walk-inReach-in Refrigerated cases or Freezer cases
                                            • ENERGY STAR Solid Door Freezer and Glass Door Freezer and Refrigerators
                                            • Refrigeration Suction Pipe Insulation
                                            • Night Cover
                                            • Strip Curtain on Walk-In CoolerFreezer
                                            • Evaporator Coil Defrost Control
                                            • Variable Speed Refrigeration Compressor
                                            • Add Doors to Open Refrigerated Cases
                                            • Door Gaskets
                                            • Zero Energy Doors
                                            • Air Cooled Refrigeration Condenser
                                            • Oversized Condenser with VFD
                                            • Case Light Occupancy Controls
                                            • LED Open Case Lighting
                                            • LED Enclosed Case Lighting Refrigerated
                                            • LED Enclosed Case Lighting Freezer
                                              • Food Service
                                                • Beverage and Snack Machine Controls
                                                • ENERGY STARreg Refrigerated Beverage Vending Machines
                                                • ENERGY STARreg Electric Steam Cooker
                                                • ENERGY STARreg Electric Combination Oven
                                                • ENERGY STARreg Commercial Convection Oven
                                                • ENERGY STARreg Commercial Fryers
                                                • ENERGY STARreg Commercial Hot Holding Cabinet
                                                  • Motors and Variable Frequency Drives
                                                    • Early Replacement Motors
                                                    • Variable Frequency Drives on HVAC Fan Applications
                                                    • Variable Frequency Drives on Pump Applications
                                                    • Variable Speed Control for Kitchen Exhaust Hoods
                                                    • Variable Speed Drives for Process or Other Equipment
                                                      • Domestic Hot Water
                                                        • Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater
                                                        • Heat Pump Water Heater
                                                        • Low Flow Pre-Rinse Spray Valve
                                                        • Domestic Hot Water Incentive Table
                                                          • Compressed Air Systems
                                                            • No-loss Condensate Drain
                                                            • Air-Entraining air nozzle
                                                            • Storage Tanks for LoadNo Load Screw Compressors
                                                            • Cycling Refrigerated Thermal Mass Dryer
                                                            • Variable Speed Air Compressor
                                                            • Compressed Air System Optimization
                                                            • Compressed Air Systems Incentive Table
                                                              • Data Centers
                                                                • Air Cooled Chiller
                                                                • Air Cooled Chiller without Condenser
                                                                • Computer Room Air Conditioner
                                                                • Computer Room Air Handler Variable Speed
                                                                  • Replacing constant speed CRAH with VSD CRAH
                                                                    • Water Cooled Centrifugal Chiller
                                                                    • Water Cooled Positive Displacement or Reciprocating Chiller
                                                                    • Uninterruptible Power Supply
                                                                    • Mainframe Refresh
                                                                    • Server Refresh
                                                                      • Whole Building Systems
                                                                        • Whole Building Systems Approach
                                                                        • How to Apply for Whole Building Systems Incentives
                                                                        • Customer Eligibility
                                                                        • Project Eligibility
                                                                        • Whole Building Systems Incentives Table
                                                                          • Custom Project Specifications
                                                                            • Instructions for Energy Savings Calculations for Custom Projects
                                                                            • Equipment Information Submittals
                                                                            • Energy Savings Calculations
                                                                            • Baseline for Custom Analysis
                                                                            • Baseline or Existing System Summary

Exterior New Construction LightingExterior New Construction savings over code lighting power density will be incentivized using custom lighting measure at $005kWh rate Participants must submit exterior lighting plans Submittals COMCHECK REPORT and lighting schedule for exterior lighting Savings are calculated from the LPD (Wsq ft) indicated below Additional information may be required based on the building exterior type and space description indicated below To contribute to incentive LEDs must satisfy program requirements for DLC Energy Star or equivalent listing

Required Documentation bull COMcheck Interior Lighting Report or equivalent analysis demonstrating space-by-space or

building area calculations bull Drawings showing lighting fixture layout bull Lighting fixture schedule sheet including fixture counts bull Fixture submittal or specification sheets showing model number and rated fixture wattage

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 23

Building Exterior Space Description LPD

Unco erect Pariki Ilg Area Parlurng ots arnd Drives 0 15 WfW

B i ing Grournds W al 1Yays lless Hlan 11] e 10 Wltirneru- 00

W a Nays 10 middot de or greater 112 W

Plaza a reas

Spec rest re areas

Stainh1ays 1ow 2

B i ing 8ntrames and Exits Ma efilbies m wr near foot of door width

Other doors 2o w 1r ear foot of door width

Ctmqpies and Overhimgs Free starndillg and a ched tmd 12s w m2 m bullerhangs

0 door sales Op en areas (ind udi Ilg ve id e sales 05 W lo )

street frontage far vehicle sales lots 21] W linear toot in addi middot on to open are-0bullmiddot lo~nce

B i ing facades 0 2 W tfl2 middot or eacil illumirnated N311 or surface

o r 5 0 Wllinear root fo r eac h m n inated N3l1 o r

surface length

Automated te lle r rnachmiddot es a lld 210 W per loca tion plus 91] night deposito liies W 1pernddiliorml A I middot per

1oca middot om

Eirltrances and gatehouse inspecliion 125 W ffl2 o middot uncovered slatiaBS a goo~ ed acir ies area

Load ing are-0s or law enforcement 0 5 W 2 of u rnco1bullered area fire ambu rnce and otiher emergency service ibullehmiddotctes

Drive-through w indOWs a taslrood 400 W per drive-Hlrough restaurants

Parking near 24 -h our retail 80111 W per main entry entmn ces

HVAC Equipment Air-Source Air Conditioners and Air-Source Heat Pumps New unitary air conditioning units or air source heat pumps that meet or exceed the qualifying cooling efficiency shown in the HVAC Incentives Worksheet are eligible for an incentive They can be either split systems or single package units The efficiency of split systems is based on an ARI reference number All packaged and split system cooling equipment must meet Air Conditioning and Refrigeration Institute (ARI) standards (210240 320 or 340360) be UL listed use a minimum ozone-depleting refrigerant (eg HCFC or HFC) All required efficiencies are based on the Consortium for Energy Efficiency (CEE) high-efficiency commercial air conditioning and heat pump specifications (wwwcee1org) A manufacturerrsquos specification sheet indicating the system efficiency must accompany the application Disposal of the existing unit

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 24

must comply with local codes and ordinances

Package Terminal Systems (Replacements) Package terminal air conditioners and packaged terminal heat pumps are through-the-wall self-contained units that are 2 tons (24000 Btuh) or less All EER values must be rated at 95degF outdoor dry-bulb temperature

Ductless Mini-Split Heat Pump lt54 Tons Incentives are offered for Ductless Mini-Split Heat Pump lt54 Tons with SEER rating greater than or equal to 120 and EER greater than or equal to 145 and HSPF greater than or equal to 90

Geothermal Heat Pump Geothermal equipment is a high-efficiency groundwater source water source or ground source heat pump system that meets or exceeds the energy efficiency requirements shown in the tables below These measures do not apply to heat pump systems coupled with non-heat pump systems such as chillers rooftop AC units boilers or cooling towers which must be filed as custom measures All HVAC applications other than comfort cooling and heating such as process cooling must also be applied for as custom measures

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 25

HVAC Heating Qualifying Incentive

Equipment Type and Cooling Capacity Cooling Qualifying Efficiency ($ per cooling Measure Code Efficiency

ton)

Air Cooled Air Conditioner

H01 lt 54 tons (lt 65000 Btuhr) 15 SEER NA $22

H02 lt 54 and lt 11 25 tons

125 IEER $22 (lt 65 000 Btuh and lt 135 000 Btuhr) NA

H03 lt11 25 and lt 20 tons

123 IEER NA $22 (lt 135000 Btuh and lt 240000 Btuhr)

H04 lt 20 and lt 6333 tons (~

11 1 IEER NA $22 240000 Btuh and lt 760000 Btuhr)

HOS ~ 6333 Ions (~ 760000 Btuhr) 103 IEER NA $22

Air Cooled Heat Pumps

H06 lt 54 tons (lt 65000 Btuhr) 143 SEER 87 HSPF $30

H07 lt 54 and lt 11 25 tons

123 IEER 3 3 COP $30 (lt 65000 Btuh and lt 135000 Btuhr)

HOS lt11 25 and lt 20 tons

1U IEER 3 2 COP $30 (lt 135000 Btuh and lt 240000 Btuhr)

H09 lt 2000 tons (240000 Btuhr) 105 IEER 3 2 COP $30

Packaged Terminal Systems (PTAC and PTHP) (PTHP only)

H10 lt 8000 Btuhr (lt066 tons) 11 8 EER 33 $17

H11 ~8000 and lt10500 Btuhr (~066 and lt 0875 tons) 11 4 EER 32 $17

H12 gt10500 Btuhr ( 875 tons) 107 EER 31 $17

H22 lt 54 tons (lt 65000 Btuhr) 121 EER 12 3 IEER NA $22

lt 54 and lt 11 25 tons 121 EER 12 3 IEER $22 H23

(lt 65000 Btuh and lt 135000 Btuhr) NA

H24 lt11 25 and lt 20 tons

120 EER 12 2 IEER $22 (lt 135000 Btuh and lt 240000 Btuhr) NA

H25 lt20 and lt 633 tons

119 EER 12 2 IEER $22 (lt 240000 Btuh and lt 760000 Btuhr) NA

H26 ~ 633 tons( lt760000 Btuhr) 110 EER 11 1 IEER NA

$22

HVAC Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 26

Other HVAC EquipmentHotel Guest Room Occupancy Sensor Incentives are offered for occupancy-based controls that control electric air conditioning air source heat pumps and or electric heating units for individual hotel rooms Systems with nonshyelectric heat are not eligible Sensors must be controlled by automatic occupancy detectors or a key-card system and the default setting for controlled units differ by at least 5 degrees (or shut the unit fan and heating or cooling off completely) from the operating set point during unshyoccupied periods The control system may also be tied into other electric loads such as lighting and plug loads to shut them off when occupancy is not sensed The incentive is per room Replacement or upgrades of existing occupancy-based controls are not eligible as a prescriptive incentive

Economizer Integrated Dual Enthalpy Economizer ControlsThis measure is targeted to non-residential establishments whose HVAC equipment is not equipped with a functional economizer

Circulation Fan High-Volume Low-SpeedFans must be greater than 16 feet in diameter and have variable speed control

ECM Circulation Fan This measure is targeted to non-residential customers whose air handling equipment currently uses a SP or PSC fan motor rather than an ECM This measure applies only to circulating fan motors of 1 HP or less Above 1 HP motors are governed by NEMA standards and would see little to no efficiency benefit by adding an ECM The targeted fan can supply heating or cooling only or both heating and cooling

ECM Circulation Pump This measure is targeted for replacement of a shaded pole or permanent split capacitor pump or motor with an electronically commutated pump or motor le75 HP

Retrocomissioning Cooling Systems Confined to chiller plant andor isolated packaged units For reservation must contain proposal with defined scope at equipment level that demonstrates energy savings For final approval required final commissioning report including raw data (TAB reports) demonstrating actual scope

This prescriptive measure can be used for facilities with maximum cooling demand less than 1687 tons Larger systems require the use of custom HVAC measure

Retrocomissioning Whole Building Covers all relevant major mechanical systems such as chiller plant air side systems compressed air andor process systems For reservation must contain proposal with defined scope at equipment level that demonstrates energy savings For final approval required final commissioning report including raw data (TAB reports) demonstrating actual scope

This prescriptive measure can be used for facilities less than 404858 square feet Larger facilities require the use of custom HVAC measure

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 27

Energy Management System For installing a web-based building automation system in existing buildings that currently have no digital automated HVAC controls or have outdated pneumatic control systems with inoperable time control functions Existing HVAC control systems must not have time-of-day scheduling Upgrading obsolete EMS HVAC system with inoperable time clock functions will be reviewed on a case-by-case basis for incentive eligibility This incentive cannot be combined with incentives for programmable thermostats or setback-setup controls Must include the controls strategy and a scaled floor-plan with controlled areas highlighted HVAC BAS systems must be new and include bull Central time clock control bull Web-based interface with PC-based controls and graphic bull Building performance Tracking bull Open-protocol architecture controls system shall consist of either LonTalk (ANSICEA 7091) or BACNet (ASHRAE ANSI 135) protocol being used between all controlled and controlling devices and every node on the network bull Minimum setback period must exceed 2200 hours per year bull A minimum setback space temperature of at least 10degF when heating and 5degF when cooling bull Ability to adjust schedules and settings remotely over the internet bull Report generation describing energy and operating trends

This prescriptive measure can be used for facilities with maximum cooling demand less than 456 tons Larger systems require the use of custom HVAC measure

Demand Controlled Ventilation New ventilation controls must use carbon dioxide levels to measure occupancy and modify the percentage of outside air based on occupancy levels Only buildings with space heating and cooling requirements are eligible Conditioned spaces must be kept between 65ordmF and 75ordmF during occupied operating hours Carbon dioxide sensors must be installed in conjunction with fully functioning motor operated outside air dampers Dual temperature air-side economizers with zone-level CO2 sensors for rooftop units are eligible

This prescriptive measure can be used for facilities with maximum cooling demand less than 2210 tons Larger systems require the use of custom HVAC measure

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 28

Other HVAC Measures- consult project manual for eligibility specifications HVAC

Measure Incentive Unit Quantity Incentive

Measure Code er Unit

H1 8 Hotel Guest Room Occupancy Sensor Room $20

H1 9 Economizer Integrated Dual Enthalpy Economizer Controls Ton $1 5

H20 Circulation Fan High-Volume Low-Speed Unit $30

H21 ECM Circulation Fan Fan $1 5

H27 ECM Circulation Pump Pump $50

H28 Retrocommissioning Cooling Systems

Ton $750

H29 Retrocommissioning Whole Buidling

Square Foot $010

H29 Energy Management System Ton $2500

H30 Demand Controlled Ventilation Ton $2500

Other HVAC Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 29

Unitary HVAC Chillers

Air-Cooled Chillers Water Cooled Positive Displacement Reciprocating Chillers and Water Cooled Centrifugal Chillers Chiller applications including existing multiple chiller configurations (including redundant or lsquostand-byrsquo chillers) existing chillers serving multiple load groups and chillers in industrial applications are defined as non-standard applications and must follow a site-specific custom protocol $005kWh) rate

Incentives are offered for chillers with an IPLV value (expressed in kW per ton) that is less than or equal to the qualifying efficiency shown in the table below The chiller efficiency rating must be based on ARI Standard 550590-2003 for IPLV conditions The chillers must meet ARI standards 550590-2003 be UL listed and use a minimum ozone-depleting refrigerant (eg HCFC or HFC) The ARI net capacity value should be used to determine the chiller tons A manufacturerrsquos specification sheet with the rated kWton-IPLV or COP-IPLV must accompany the application along with the four point performance data that is the basis for the IPLV The application must include a certification that the chiller is appropriately sized for site design load conditions

Chillers must satisfy efficiency requirements for both full load and IPLV efficiencies for either Path A or Path B The table shows the minimum efficiency ratings to qualify for the prescriptive incentive which must be consistent with the expected operating conditions of the efficient chiller For example if the efficient chiller satisfies Path A and generally performs at part load the appropriate baseline chiller efficiency is the IPLV value under Path A If the efficient chiller satisfies Path B and generally performs at full load the appropriate baseline chiller efficiency is the full load value under Path B Generally chillers operating above 70 percent load for a majority (50 or more) of operating hours should use Path A and chillers below 70 load for the majority of operating hours should use Path B

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 30

C3 lt 75 tons

C4 75 tons and lt 150 tons

cs ~ 150 tons and lt 300 tons C6 ~ 300 tons

Water Cooled Centrifugal Chillers C7 lt 300 tons CB ~ 300 tons and lt 600 tons

C9 ~ 600 tons

Path A

Qualifying Full Load Efficiency

Qualifying IPLV Efficiency

Path B

Qualifying Full Load Efficiency

Qualifying IPLV Efficiency

0780 kWton 0567 kWton 0800 kWton 0540 kWton

0775 kWton 0554 kWton 0790 kWton 0527 kWton

0680 kWton 0522 kWton 0718 kWton 0486 kWton 0620 kWton 0486 kWton 0639 kWton 0441 kWton

0634 kWton 0536 kWton 0639 kWton 0405 kWton 0576 kWton 0494 kWton 0600 kWton 0360 kWton

0570 kWton 0494 kWton 0590 kWton 0360 kWton

I

Incentive ($ton)

$17

$17

Unitary Chiller Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 31

Refrigeration

Anti-Sweat Heater Controls Incentives are offered for devices that sense the relative humidity in the air outside of the display case and cycles or turns off the glass door (if applicable) and frame anti-sweat heaters when the ambient dew point is below a preset set point Technologies that can turn off anti-sweat heaters based on sensing condensation (on the inner glass pane) also qualify Incentive is based on the number of doors

Evaporator Fan Controls This measure is for the installation of controls in medium temperature walk-in coolers The controller reduces airflow of the evaporator fans when there is no refrigerant flow The measure must control a minimum of 120 HP where fans operate continuously at full speed The measure also must reduce fan motor power by at least 75 during the off cycle This measure is not applicable if any of the following conditions apply 1) Compressor runs all the time with high duty cycle 2) Evaporator fan does not run at full speed all the time 3) Evaporator fan motor runs on poly-phase power 4) Evaporator fan motor is not shaded-pole or permanent split capacitor (PSC) 5) Evaporator fan does not use off-cycle or time-off defrost

Floating Head Pressure Controls Controls must vary head pressure to adjust condensing temperatures in relation to outdoor air temperature Must replace existing constant pressure or manually controlled systems to achieve reduced head pressure in order to maintain a minimum saturated condensing temperature of 70 degF or a 20 degF variance below design heat pressure during mild weather conditions Compressor size must be at least 5 HP

Automatic Door Closers for Walk-In Coolers and Freezers The auto-closer should be applied to the main insulated opaque door(s) of a walk-in cooler or freezer The auto-closer must be able to firmly close that door when it is within one inch of full closure This must be a newly installed automatic door closer replacements on previously installed door closers are not eligible for an incentive

EC Motor for Walk-inReach-in Refrigerated cases or Freezer cases Incentives are offered for replacement of an existing standard-efficiency shaded-pole or permanent split capacitor evaporator fan motor in refrigerated display cases or fan coil in walk-ins The replacement unit must be an Electronically Commutated Motor (ECM) This measure cannot be used in conjunction with the Evaporator Fan Controller measure

ENERGY STAR Solid Door Freezer and Glass Door Freezer and Refrigerators Incentives are offered for replacement of existing self-contained refrigerators and freezers with units that are ENERGY STARreg listed Only units with built-in refrigeration systems are qualified Units with remote refrigeration systems or units do not qualify Customers must provide proof that the appliance meets the CEE or ENERGY STAR efficiency specifications using ASHRAE Standard 72-2005 (38degF plusmn 2degF) Incentive is per unit

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 32

Refrigeration Suction Pipe Insulation 1 Must insulate bare refrigeration suction lines of 1 58 inches in diameter or less on existing equipment only 2 Cooler lines require frac34 inch of flexible closed-cell nitrite rubber or an equivalent insulation 3 Freezer lines require 1-inch of flexible closed-cell nitrite rubber or an equivalent insulation 4 Insulation exposed to the outdoors must be protected from the weather (ie jacketed with a medium-gauge aluminum jacket)

Night Cover 1 Must install a cover on an existing open refrigerated display case to decrease its cooling load during off hours 2 The equipment manufacturer must not object to the use of night covers for the existing display case model 3 This rebate is based on the linear footage of the installed 4 The cover must be applied for a period of at least six hours

Strip Curtain on Walk-In CoolerFreezer 1 New strip curtains or plastic swinging doors must be installed on doorways of refrigerated spaces (conditioned to less than 50deg F) 2 Rebate is based on the linear footage of the doorway that the strip curtains are being installed in 3 Opening between the strip curtain and bottom of doorway must be no larger than 1 inch 4 Strips must have an overlay greater than 1 inch

Evaporator Coil Defrost Control 1The current system must include an operating electric defrost system with a functional electroshymechanical time clock 2 Evaporator coil temperature and pressure must be monitored by controller in order to determine optimal defrost cycles 3 New intelligent control systems to control the defrost systems will typically replace timed- defrost controls

Variable Speed Refrigeration Compressor This measure VSD control for refrigeration systems and its eligibility targets applies to retrofit construction in the commercial and industrial building sectors it is most applicable to grocery stores or food processing applications with refrigeration systems This protocol is for a VSD control system replacing a slide valve control system

Add Doors to Open Refrigerated Cases The eligible retrofit equipment is either no sweat doors or doors with anti-sweat heaters If a lighting retrofit is included with the new doors it must consume the same amount of energy or less energy than the old lighting Upgrades to lighting or other system components should be processed separately Horizontal cases are not eligible and should be processed as custom

Door Gaskets PECO Smart Ideas For Your Business CampI Program Application Manual

Q1 2017 pg 33

This measure is applicable to commercial refrigeration and applies to the replacement of worn-out gaskets with new better-fitting gaskets Applicable gaskets include those located on the doors of walk-in andor reach-in coolers and freezers This protocol applies to the main doors of both low temperature (ldquofreezerrdquo ndash below 32 degF) and medium temperature (ldquocoolerrdquo ndash above 32 degF) walk-ins

Zero Energy Doors For this measure a no-heatlow-heat clear glass door must be installed on an upright display case It is limited to door heights of 57 inches or more Doors must have either heat reflective treated glass be gas filled or both This measure applies to low temperature cases onlymdashthose with a case temperature below 0degF Doors must have 3 or more panes Total door rail glass and frame heater amperage ( 120 volt) cannot exceed 039413 amps per door for low temperature display cases Rebate is based on the door width (not including case frame)

Air Cooled Refrigeration Condenser Approach temperature lt8F for low temperature loads lt13F for medium temperature loads

Oversized Condenser with VFD New standalone condenser must no more than 150 larger than load

Case Light Occupancy Controls Acceptable for freezer or refrigerated cases as well as open cases or cases with doors

LED Open Case Lighting For replacing open case T8 or T12 fluorescent fixtures with DLC listed LEDs on refrigerators coolers and freezers

LED Enclosed Case Lighting Refrigerated LED case lighting with or without motion sensors on enclosed refrigerated vertical displays The baseline equipment is assumed to be cases with uncontrolled T8 or T12 linear fluorescent lamps

LED Enclosed Case Lighting Freezer LED case lighting with or without motion sensors on enclosed freezer vertical displays The baseline equipment is assumed to be cases with uncontrolled T8 or T12 linear fluorescent lamps

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 34

Refrigeration Measures Ref Measure

Measure Incentive Unit IncentiveUnit Code R01 Anti-Sweat Heater Controls Door $30

R02 Evaporator Fan Controls Controller $50

R03 Floating-head Pressure Controls HP $20

R04 Automatic Door Closers fo r Walk-in Coolers Door $75

R05 Automatic Door Closers fo r Walk-in Freezers Door $75

R06 Evaporator Fan EC Motor fo r Reach- in Cases Motor $35

RO Evaporator Fan EC Motor fo r Walk-in Cases Motor $50

R08 ENERGY STARreg Glass Door Freezer lt15 Cu Ft Unit $100

R09 ENERGY STARreg Glass Door Freezer 15- 49 Cu Ft Unit $125

R10 ENERGY STARreg Glass Door Freezer ~ 50 Cu Ft Unit $145

R11 ENERGY STARreg Solid Door Freezer Unit $75

R12 ENERGY STARreg Glass Door Refrigerator lt50 Cu Ft Unit $30

R13 ENERGY STARreg Glass Door Refrigerator gt= 50 Cu Ft Unit $50

K14 t NtKGY ~ I AKreg ~Olld Uoor Ketngerator $ OU Cu t-t Unit $~0

R15 Suction Pipe Insulation Walk-in Coolers Linear Foot $050

R16 Suction Pipe Insulation Walk in Freezers Linear Foot $075

R17 Night Cover Linear Foot $800

R18 Strip Curtains on Walk-in Cooler Linear Foot $250

R19 Evaporator Coil Defrost Control Controller $7500

R20 Variable Speed Refrigeration Compressor Compressor $85

R21 Add Doors to Open Refrigerated Cases Door $55

R22 Door Gaskets Door $250

R23 Zero Energy Doors Door $50

R24 A ir Cooled Refrigeration Condenser Ton $10

R25 Oversized Condenser with VFD Ton $10

R26 Case Light Occupancy Controls Door $8

R27 LED Open Cose Lighting Cose $10

R28 LED Enclosed Case Lighting Refrigerated Door $30

R30 LED Enclosed Case Lighting Freezer Door $30

Refrigeration Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 35

Food Service Beverage and Snack Machine Controls Incentives are offered for refrigerated vending machines that contain non-perishable bottled and canned beverages Controller for both types of systems must include a passive infrared occupancy sensor to turn off fluorescent lights and other energized machine systems when the surrounding area is unoccupied for 15 minutes or longer For the refrigerated machines the control logic may include periodic power up at 2-hour intervals or longer to maintain product temperature and provide compressor protection

ENERGY STARreg Refrigerated Beverage Vending Machines Incentives are offered for ENERGY STARreg beverage vending machines Qualifying machines can be found at httpswwwenergystargovproductsothervending_machines

ENERGY STARreg Electric Steam Cooker This measure applies to the installation of electric ENERGY STAR steam cookers as either a new item or replacement for an existing unit Gas steam cookers are not eligible The steam cookers must meet minimum ENERGY STAR efficiency requirements A qualifying steam cooker must meet a minimum cooking efficiency of 50 percent and meet idle energy rates specified by pan capacity

ENERGY STARreg Electric Combination Oven This measure applies to electric ovens capable of handling single 12 x 20 x 25 pan per rack

ENERGY STARreg Commercial Convection Oven The oven must meet or exceed heavy load potato cooking energy efficiency of greater than 70 utilizing ASTM Standard F149 Applies only to electric ovens

ENERGY STARreg Commercial Fryers The commercial fryer must have a tested heavy load (French fry for large vats) cooking energy efficiency of greater than 80 utilizing American Society for Testing and Materials (ASTM) Standard F1361 for commercial fryers and ASTM Standard F2144 for large vat fryers Multiple vat configurations are paid per qualifying vat ENERGY STAR maintains a list of qualifying products and specifications at httpwwwenergystargov

ENERGY STARreg Commercial Hot Holding Cabinet Energy STAR rating electric

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 36

Food Service amp Other Measures FoodOther

Measure Incentive Unit Incentive

Measure Code Unit

F01 Beverage Machine Controls Unit $25

F02 Snack Machine Controls Unit $20

F03 ENERGY STARreg Refrigerated Beverage Vending Machir Unit $125

F04 ENERGY STARreg Commerc ial Steam Cooker Unit $200

F05 ENERGY STARreg Electric Combination Oven Unit $200

F06 ENERGY STARreg Commercial Electric Convection Oven Unit $150

F07 ENERGY STARreg Commerc ial Fryers Unit $100

F08 ENERGY STARregCommerc ial Hot Holding Cabinet Unit $200

Food Service Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 37

Motors and Variable Frequency DrivesEarly Replacement Motors For constant speed and uniformly loaded motors this measure applies to the replacement of old motors with new energy efficient motors of the same rated horsepower Old motors must be less than 15 years Replacements where the old motor and new motor have different horsepower ratings are considered custom measures Motors with variable speeds variable loading or industrial-specific applications are also considered custom measures

Motors Incentive Table Motors

Measure Code

HP Incentive per Motor

M01 15 - 10 $40 M02 11 - 50 $100 M03 51-100 $150 M04 gt100 $300

Only VFDs on unitary systems are eligible Non-unitary systems must be submitted as a custom measure Soft start motors are not eligible

Variable Frequency Drives on HVAC Fan Applications Incentives are offered for installing VFDs on existing HVAC fans that do not have pre-existing VFDs This measure applies to HVAC supply and return fans only All other fans including cooling tower fans must be submitted as custom measures Manually fixed speed settings on HVAC fans must be submitted via custom application The VFD must control motor speed automatically in response to pressure flow temperature or other variable signal The installation of a VSD must accompany the permanent removal or disabling of any throttling devices such as inlet vanes bypass dampers and throttling valves etc The incentive is offered per controlled HP

Variable Frequency Drives on Pump Applications Incentives are offered for installing VFDs on existing chilled water pumps and heating hot water pumps that do not have existing VFDs This measure applies to chilled water pumps and heating hot water pumps only All other pumps must be submitted as custom measures Manually fixed speed settings on pumps must be submitted via custom application The VFD must control motor speed automatically in response to pressure flow temperature or other variable signal The installation of a VSD must accompany the permanent removal or disabling of any throttling devices such as throttling valves The incentive is offered per controlled HP

Variable Speed Control for Kitchen Exhaust Hoods The measure consists of installing a new VSD in conjunction with a sensor control system that varies the exhaust rate of kitchen ventilation (exhaust andor makeup air fans) based on the heat and effluent output from the cooking appliances (ie the more heat and smokevapors generated the more ventilation needed) This involves installing a temperature sensor in the hood exhaust collar andor an optic sensor on the end of the hood that senses cooking conditions and allows the system to automatically vary the rate of exhaust to match requirements by adjusting the fan speed accordingly

Variable Speed Drives for Process or Other Equipment VFD must be used in conjunction with a process (non HVAC) application To qualify for this incentive the driven equipment must operate at least 2000 hours per year Redundant or back- up units do not qualify VFDs replacing existing VFDs do not qualify The VFD must control motor

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 38

speed automatically in response to pressure flow temperature or other variable signal VFDs installed as ldquosoft startrdquo without automatic manual closed loop speed control do not qualify The installation of a VFD must accompany the permanent removal or disabling of any throttling devices such as throttling valves The incentive is per controlled HP and only applies to controlled motors less than 50 HP

VSDVFD Incentives Table VFD

Measure Code

Measure Unit Incentive per Unit

Fan Application

V01 VFD on HVAC Fan HP $25 Pump Application

Variable Speed Control for Kitchen Exhaust Hoods

Variable Speed Drives for Process or Other Equipment

V02 VFD on Chilled Water Pumps HP $25 V03 VFD on Heating Hot Water Pumps HP $25

V04 Kitchen Exhaust Fan Retrofit Hood HP $500

V05 Process Motor lt 50 HP HP $50

Domestic Hot Water Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater This measure documents the energy savings attributed to converting from a standard electric water heater to an ENERGY STAR natural gaspropane-fired water heater or a standard oil-fired water heater with an Energy Factor of 0585

Heat Pump Water Heater This includes heat pump water heaters with energy factors meeting ENERGY STAR criteria The measure described here involves a direct retrofit of a resistive electric water heater with a heat pump water heater It does not cover systems where the heat pump is a pre-heater or is combined with other water heating sources More complicated installations can be treated as custom projects

Low Flow Pre-Rinse Spray Valve This measure applies to efficient low flow pre-rinse sprayers in grocery and food service applications The most likely areas of application are kitchens in restaurants and hotels Only premises with electric water heating may qualify for this incentive In addition the replacement pre-rinse spray nozzle must use less than 16 gallons per minute with a cleanability performance of 26 seconds per plate or less Low flow pre-rinse sprayers reduce hot water usage and save energy associated with water heating

Domestic Hot Water Incentive Table

Measure Code Measure Unit Retrofit Incentive per

Unit

W01 Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater Unit $100

W02 Heat Pump Water Heater Unit $100 W03 Low-Flow Pre-Rinse Spray Valve Valve $17

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 39

Compressed Air SystemsNo-loss Condensate Drain No-loss Condensate Drains are controlled by a sensor that monitors the level of condensate and only open when there is a need to drain condensate They close before compressed air is allowed to escape This measure is targeted to non-residential customers whose equipment is a timed drain that operates on a pre-set schedule Acceptable baseline conditions are compressed air systems with standard condensate drains operated by a solenoid and timer

Air-Entraining air nozzle This measure is targeted to non-residential customers whose compressed air equipment uses stationary air nozzles in a production application with an open copper tube of 18rdquo or 14rdquo orifice diameter Energy efficient conditions require replacement of an inefficient non-air entraining air nozzle with an energy efficient air-entraining air nozzle that use less than 15 CFM at 100 psi for industrial applications

Storage Tanks for LoadNo Load Screw Compressors This measure protocol applies to the installation of air receivers with pressureflow controls to loadno load compressors Loadno load compressors unload when there is low demand The process of unloading is done over a period of time to avoid foaming of the lubrication oil Using a storage tank with pressureflow control will buffer the air demands on the compressor Reducing the number of cycles in turn reduces the number of transition times from load to no load and saves energy The baseline equipment is a loadno load compressor with a 1 galcfm storage ratio or a modulating compressor with blowdown The high efficiency equipment is a loadno load compressor with a minimum storage ratio of 4 gallons of storage per cfm

Cycling Refrigerated Thermal Mass Dryer When air is compressed water vapor in the air condenses and collects in liquid form Some of this condensate collects in the air distribution system and can contaminate downstream components such as air tools with rust oil and pipe debris Refrigerated air dryers remove the water vapor by cooling the air to its dew point and separating the condensate Changes in production and seasonal variations in ambient air temperature lead to partial loading conditions on the dryer Standard air dryers use a hot gas bypass system that is inefficient at partial loads A Cycling Thermal Mass Dryer uses a thermal storage medium to store cooling capacity when the system is operated at partial loads allowing the dryer refrigerant compressor to cycle

This measure is targeted to non-residential customers whose equipment is a non-cycling refrigerated air dryer with a capacity of 600 cfm or below Acceptable baseline conditions are a non-cycling (eg continuous) air dryer with a capacity of 600 cfm or below The replacement of desiccant deliquescent heat-of-compression membrane or other types of dryers does not qualify under this measure

Variable Speed Air Compressor This type of compressor uses a special drive to control the speed (RPM) of the unit which in turn saves energy compared to a fixed speed equivalent

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 40

No-loss Condensate Drain Air-Entraining Air Nozzle Cycling Refrigerated Thermal Mass Dryer

Compressor Incentive per

Equipment Type Units Quantity Daily Operating Unit

Hours

CA04 Storage Tanks for LoadNo Load Screw

Compressor HP $10 Compressors

CA05 Variable Speed Air Compressor

Compressor HP $30

CA06 Compressed Air System Optimization

Compressor HP $50

Compressed Air System Optimization The submitted optimization measures must be identified in an Air System Audit or equivalent study to be eligible The measures must demonstrate energy savings as evaluated by a Program Engineer Additionally measures must also fall under one or more of the category below to be eligible

1) Install storage Receivers (new receivers only replacing existing storage receivers are ineligible)

2) Compressor control (must demonstrate improvement in partial load efficiency of the compress air system including reduceeliminate partially loaded units)

3) Dryer control 4) Source pressure reduction 5) Right-sizing distribution components such as piping filters regulators

connectors and hoses (routine maintenance replacements are ineligible) 6) Leakage detection and repair 7) Eliminate low-efficiency end-usages of compressed air 8) Heat recovery (most reduce electricity consumption of the replaced heat source)

Compressed Air Systems Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 41

lt65000 Btuh

~ 65000 Btuh and lt135000 Btuh

135000 Btuhand lt240000 Btuh

240000 Btuh and lt760000 Btuh

760000 Btuh

154

142

135

125

123

Chiller Capacity Path APath B efficiency (kWton )

lt 150 tons

~150 tons and lt300 tons

300 tons and lt400 tons

400 tons and lt600 tons

600 tons

lt75 tons

~75 tons and lt150 tons

~150 tons and lt300 tons

~300 tons and lt600 tons

600 tons

0610 FU0695 FL and 0550 IPLV0440 IPLV

0610 FU0635 FL and 0550 IPLV0400 IPLV

0560 FU0595 FL and 0520 IPLV0390 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

Path APath B efficiency (kWton )

0750 FU0780 FL and 0600 IPLV0500 IPLV

0720 FU0750 FL and 0560 IPLV0490 IPLV

0660 FU0680 FL and 0540 IPLV0440 IPLV

0610 FU0625 FL and 0520 IPLV0410 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

Data Centers Data Center incentives are available for facilities ranging in size from office server closets to large standalone facilities

Air Cooled Chiller Path APath B EER (BtuWh) lt150 tons 101 FL97 FL and 137 IPLV158 IPLV ge150 tons 101 FL97 FL and 140 IPLV161 IPLV

Air Cooled Chiller without Condenser Air-cooled chillers without condenser must be rated with matching condensers and comply with air-cooled chiller efficiency requirements

Computer Room Air Conditioner

Computer Room Air Handler Variable Speed Replacing constant speed CRAH with VSD CRAH

Water Cooled Centrifugal Chiller

Water Cooled Positive Displacement or Reciprocating Chiller

Uninterruptible Power Supply Must be Energy Star Certified UPS or have full load efficiency rating

ge948 for 20-100 kVA ge978for ge100 kVA

Mainframe Refresh The rated efficiency of the replacement Mainframes power supply must be at least 8 more

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 42

- Equipment Type Units IncentiveUnit

D1 Air Cooled Chiller Ton $4000 D2 Air Cooled Chiller W ithout Condenser Ton $2000 D3 Computer Room Air Conditioner Ton $3000 D4 Computer Room Air Handler Variable Speed Ton $1000 D5 Water Cooled Centrifugal Chiller Ton $3000 D6 Water Cooled Positive Displacement or Reciprocatin $3000 D7 Uninterruptible Power Supply 20-100 kVA $1000 D8 Uninterruptible Power Supply gt 100 kVA $1000 D9 Mainframe Refresh $2000

D10 Server Refresh $2000 D11 PC Power Managment System $600 D12 HVAC System Optimization $005 D1 3 HoUCold Aisle Containment kWh saved $005 D14 Server Virtualization kW reduction $40000 D1 5 Thin Clients Units $500

efficient compared to the existing Mainframes power supply The replacement Mainframe if Inactive must be decommissioned and removed from the Data Center

Server Refresh Replacement servers must be ENERGY STARreg certified Replacement servers power supply must be 5 more efficiency compared to the power supply of the replaced servers The replaced server must be decommissioned and removed from the data center

HVAC System Optimization Final system must have these features

-Implementation of free cooling by the addition of an economizer system -Conversion of constant speed CRACCRAH into variable speed operations using VFDs and additional control functionalities and -Elevation of exhaust air temperature

HotCold Aisle Containment Includes both Hot and Cold Aisles Installing new containment measures not replacing already existed aisle containment Plenum-only installations not eligible Must result in higher difference between the return air (hot aisle) and supply air (cold aisle) temperatures measured at rack intake and exhaust locations

Server Virtualization Minimum of consolidating 5 Servers virtualized into one Server The virtualized servers if inactive are removed from the Data Center

Thin Clients Must be ENERGY STAR certified thin clients Decommissioned clients are removed from the Data Center

Data Center Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 43

Whole Building Systems Whole Building Systems Approach

The Whole Building Systems approach is intended to encourage integrated energy efficient designs by providing enhanced incentives to the customer who addresses overall energy performance Owners of eligible and qualifying new construction and major renovation projects can receive Whole Building Systems incentives when energy modeling indicates the projectrsquos performance is over 10 better than the ASHRAE 901-2007 Savings from eligible electric end-uses in kilowatt hours define the amount of financial incentive Energy savings achieved through renewable energy sources are not counted toward project energy savings and are not included in the savings basis Incentive reservations obtained during the design phase of a project will be honored for up to 24 months

How to Apply for Whole Building Systems Incentives Before construction begins bull A Pre-notification Application must be submitted documenting the Owners intention to

seek Whole Building Systems incentives bull The Owner must confirm the goals and energy efficiency strategies being pursued by the

design team on the completed Pre-notification Worksheet (Checklist tab) and in the project Summary (Whole Building Performance Summary tab)

bull Submit executable building modeling software files bull Submit the Whole Building Performance Summary worksheet energy simulation model

inputs and outputs and supporting documentation bull Receive confirmation and eligibility notification from the PECO Smart Ideas team and

receive an incentive reservation bull The final incentive paid may differ from the reserved incentive amount The final

incentive will be calculated based on site-verified equipment installation and performance The Owners final application and complete documentation must be received within 6 months of equipment installation or certificate of occupancy whichever is later

bull An executable energy model and model output demonstrating compliance with the criteria of ASHRAE 901-2007 Appendix G will be required and the equipment data sheets LED lighting fixtures must be on the DLC or Energy STAR qualified products list (QPL) to be eligible LED fixtures not on the DLC or Energy STAR QPL has the option of submitting LM79 and LM80 test reports for evaluation against DLC and Energy STAR eligibility criteria

During the construction period bull Owner and design team continue to work closely with their chosen contractor to assure

energy efficiency measures are included and installed in the completed building

When the building is constructed and operational bull Complete the Owner final application Request an equipment verification site visit by the

PECO Smart Ideas team Equipment must be installed and fully operational o Program staff will schedule a site visit and utilize submitted documentation and

measurement tools to verify that the installation follows the submitted energy simulation model

bull When PECO confirms that there are no significant changes to the installed equipment payment of the reserved incentive will be made to the Owner within 6 weeks

bull If changes from the proposed design energy simulation are found the Owner and design team will be notified of the reduced incentive amount a period of 20 calendar days will

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 44

Improvement Incentive per Sq Ft

over Code

~11 to lt20 $0155

~20 to lt30 $0233

~30 to lt40 $0350

~40 to lt60 $0525

~60 $0700

be allowed for supplemental information to be provided if no additional information is received by PECO Smart Ideas team the reduced incentive payments will be made and sent to the Owner if additional clarification and information is available program staff will work diligently to resolve the discrepancies and arrive at a reasonable incentive adjustment with the customer

Payments made by PECO Smart Ideas are final

Customer Eligibility The Owner of the proposed new building project must be a customer of PECO and receive delivery of electric service from PECO to receive kilowatt-hour based incentives Please note that electricity supply can be provided by any vendor

Project Eligibility bull The project must be a new construction or major renovation Major renovations involving

the removal and redesign of at least two building systems (such as interior lighting and mechanical systems) may apply for Whole Building Systems incentives

bull To qualify for incentives projects must demonstrate energy efficiency enhancements that achieve at least 11 improvement in the proposed design versus the standard baseline

bull The Owner must submit a Pre-approval Application to the program at the stage where changes for increased energy efficiency are still feasible and construction has not been completed

bull Projects receiving Whole Building Systems incentives are not eligible to receive other incentives such as the prescriptive or custom program incentives for the same scope

bull Project components that are NOT eligible for consideration as a basis for PECO Smart Ideas include the following o Alternative fuel sources (eg use of gas or oil equipment in lieu of electric) Please note

that combined heat and power (CHP) systems will be incentivized for the electricity they produce

o Renewable energy sources (eg solar wind biomass) bull Ineligible savings include exterior lighting process receptacle miscellaneous loads and

other unregulated end-uses Custom incentives are available for new construction exterior lighting

Whole Building Systems Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 45

Custom Project Specifications Instructions for Energy Savings Calculations for Custom Projects Custom projects must involve measures that result in a reduction in electric energy use (kWh) Electricity savings may result from either efficiency improvements or fuel switching Custom Incentives are based on the first year kilowatt-hour savings Custom applications must be accompanied by detailed engineering calculations that document the annual total energy savings

The following serve as guidelines for the minimum required documentation

Equipment Information Submittals bull A list of the present and proposed equipment and components to be installed

including manufacturerrsquos catalogmodel number bull Manufacturerrsquos specification sheets showing capacities and performance for all major

components

Energy Savings Calculations Provide calculations documenting the predicted energy consumption of the existing (or baseline) and proposed system using appropriate analytical tools and clearly stated assumptions Calculations may be performed by ldquohandrdquo but spreadsheet analysis or more rigorous modeling is preferred All analysis should be provided in electronic format All assumptions such as operating hours existing and proposed equipment operational details must be presented Engineering algorithms and procedures from recognized technical organizations such as ASHRAE SMACNA ANSI etc must be used Use rated performance factors tested under accepted procedures specified by recognized rating agencies such as AHRI ANSI ASTM etc Provide an explanation when equipment performance rating conditions vary from standard conditions

In support of the calculations extensive documentation must be provided that provides the basis for the savings estimates The documentation must provide information on the equipment operating schedule daily and seasonal load profile and baseline AND energy efficient equipment performance at the operating loads Typical documentation for custom projects often includes bull Engineering or architectural drawings and ldquoequipment schedulerdquo sheets bull Component specification sheets that include part load efficiency or performance

factors bull Spreadsheet calculations or inputoutput files and results from system modeling or

other engineering analysis using accepted engineering algorithms and practices bull Log sheets trend logs from a building management system or other operating

documentation that are often necessary to document operating hours and equipment loading and used as a basis for the calculations (in some cases short term monitoring may be required to document the load profile)

bull Control sequence of operations that are necessary where controls play a part in the savings equation

Additional documentation other than that described in the application may be required for program participation Larger projects may also require pre- and post-project sub metering or monitoring of loads andor power input as part of another measurement and verification activity to demonstrate the actual energy savings that are realized

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 46

Baseline for Custom Analysis Where equipment is replaced prior to the end of its rated service life in order to achieve energy savings the existing equipment performance may be used as the baseline in the energy savings calculations Where equipment is replaced due to failure or for other reasons (such as obsolescence or a need for more capacity) the baseline performance used in the savings calculation should be either the minimum performance that would be required by code for that equipment type and application (where a code applies) or the performance of the equipment that would have been selected as the customers standard practice when a code does not apply

Baseline or Existing System Summary On custom worksheet on application form include make model number name plate information (such as operating voltage and rated full load amps) rated capacity quantities equipment condition and age facility operating hours equipment operating schedule and load curves If needed attach separate sheets

All decisions regarding incentives for custom projects are in the sole discretion of PECO

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 47

APPENDIX PROGRAM UPDATES SUMMARY (Q1 2017) Multifamily Nursing Home and Assisted Living retrofit customers need to apply for incentives through the PECO Smart Ideas Multi-Family Program administered by Franklin Energy For more information please contact Taylor Adler at tadlerfranklinenergycom or call 1-844-4BIZ-SAVE Multifamily Nursing Home and Assisted Living new construction customers can proceed with applying for incentives here

Revised Incentives

Data Centers

Measure Incentive Effective Immediately Previous Incentive

Air-cooled chiller for data centers $40ton $10ton Air-cooled chiller without condenser for data centers $20ton $10ton

Computer room air conditioner $30ton $7ton Water-cooled centrifugal chiller for data centers $30ton $5ton Water-cooled positive displacement or reciprocating chiller for data centers

$30ton $5ton

Uninterruptible power supply 20-100 kVA $10kVA $6kVA Uninterruptible power supply gt100 kVA $10kVA $1kVA Mainframe refresh $20kW installed $5kW installed Server refresh $20kW installed $4kW installed Server virtualization $400kW reduction $4kW reduction Thin clients $5units $4units

Lighting (Effective Immediately)

Measure Incentive Effective Immediately Specification Previous

Incentive Specification

New construction exterior LED outdoor flood light LED parking garage and canopy lighting LED polearm mounted parking and roadway lighting LED wall mount fixture

$005kWh (custom)

Lighting Power Density (LPD) Requirements Unchanged

$10-54 fixture

Lighting Power Density (LPD) (Wft2) by Space Type or Building Area

LED Replacement Lamps (Tubes) 2

$250lamp 5 Min Watts Reduced

$250lamp 6 Min Watts Reduced

LED Replacement Lamps (Tubes) 4

$400lamp 10 Min Watts Reduced

$400lamp 12 Min Watts Reduced

Permanent Fixture Removal $010Watt removed

Clarification of calculation to represent actual Wattage removed

$010Watt removed

Lighting (Effective 6117)

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 48

Measure Incentive Effective 6117 Specification Previous

Incentive Previous Specification

Interior LED high-bay fixtures andor retrofit kits if lt 20000 LED Lumens

$50fixture 150 Min Watts Reduced

$75fixture 150 Min Watts Reduced

Interior LED high-bay fixtures andor retrofit kits if gt 20000 LED Lumens

$75fixture 225 Min Watts Reduced

$75fixture 150 Min Watts Reduced

New Incentives

Compressed Air

Measure New Incentive Effective Immediately Variable speed air compressor $30compressor HP Compressed air system optimization $50compressor HP

HVAC

Measure New Incentive Effective Immediately ECM circulation pump $50pump Retro-commissioning cooling systems $750ton Retro-commissioning whole building $010square foot Energy management system $25ton Demand controlled ventilation $25ton Water-cooled air conditioner $22ton

Food Service

Measure New Incentive Effective Immediately Combination oven $200unit ENERGY STARreg commercial convection oven $150unit ENERGY STARreg commercial fryers $100unit ENERGY STARreg commercial hot holding cabinet $200unit

Refrigeration

Measure New Incentive Effective Immediately Air-cooled refrigeration condenser $10ton Oversized condenser with VFD $10ton Case light occupancy controls $750door

Lighting

Measure New Incentive Effective Immediately Interior central lighting controls $00175sq foot

Motors and Drives

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 49

-

Measure New Incentive Effective Immediately VFD for dust collection system motor $50HP

Application Clarifications and Revised Requirements

Clarification of LED Eligibility for New Construction or Retrofit Projects

LED Eligibility is determined by whether lighting products are listed in either the DesignLights Consortium (DLC) Qualified Products List of commercial-grade LED luminaires or the US Environmental Protection Agency database of ENERGY STAR certified products For products not yet listed contractors may submit LM79 and LM80 test reports PECO Smart Ideas engineers will review test reports to determine if the product in question meets performance specifications

Revised W 9 Requirement

W-9 forms EIN numbers are no longer required

Deletion of erroneous statement in New Construction Lighting

The following statement from previous Business Manual has been deleted ldquoThe minimum lighting power density used to calculate the incentive shall be no lower than 50 of the ASHRAE 901-2007 valuerdquo

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 50

  • Commercial amp Industrial Program Application Manual
    • Follow This Easy Process
      • Pre-Approval Application Checklist
      • Final Application Checklist
          • Terms and Conditions
            • Program Effective Dates
            • Program and Project Eligibility
            • Incentive Payment Limits
            • Application Review Process
            • Inspections andor PUCrsquos Statewide Program Evaluation
            • Requirements for Custom Project Electricity Savings Calculation
            • Tax Liability
            • No Endorsement
            • Warranties
            • Limitation of Liability
            • Assignment
            • Customerrsquos Certification
            • Termination
            • Acknowledgement
              • Retrofit Lighting Solutions
                • General Linear Fluorescent Lamp and Ballast Specification Requirements
                • LED Lamps and Fixtures
                • Minimum Watts Reduced
                • Linear LED (Tubes)
                • Permanent Fixture Removal
                  • LED Traffic Signals
                    • LED Traffic Signals Incentive Table
                      • New Construction Lighting Specifications
                        • New Construction Lighting Incentives Table
                          • New Construction Lighting Power Density Code
                              • Exterior New Construction Lighting
                              • HVAC Equipment
                                • Air-Source Air Conditioners and Air-Source Heat Pumps
                                • Package Terminal Systems (Replacements)
                                • Ductless Mini-Split Heat Pump lt54 Tons
                                • Geothermal Heat Pump
                                  • Other HVAC Equipment
                                    • Hotel Guest Room Occupancy Sensor
                                    • ECM Circulation Fan
                                    • ECM Circulation Pump
                                    • Retrocomissioning Cooling Systems
                                    • Retrocomissioning Whole Building
                                    • Energy Management System
                                    • Demand Controlled Ventilation
                                    • Other HVAC Incentives Table
                                      • Unitary HVAC Chillers
                                        • Air-Cooled Chillers Water Cooled Positive Displacement Reciprocating Chillers and Water Cooled Centrifugal Chillers
                                          • Refrigeration
                                            • Anti-Sweat Heater Controls
                                            • Evaporator Fan Controls
                                            • Floating Head Pressure Controls
                                            • Automatic Door Closers for Walk-In Coolers and Freezers
                                            • EC Motor for Walk-inReach-in Refrigerated cases or Freezer cases
                                            • ENERGY STAR Solid Door Freezer and Glass Door Freezer and Refrigerators
                                            • Refrigeration Suction Pipe Insulation
                                            • Night Cover
                                            • Strip Curtain on Walk-In CoolerFreezer
                                            • Evaporator Coil Defrost Control
                                            • Variable Speed Refrigeration Compressor
                                            • Add Doors to Open Refrigerated Cases
                                            • Door Gaskets
                                            • Zero Energy Doors
                                            • Air Cooled Refrigeration Condenser
                                            • Oversized Condenser with VFD
                                            • Case Light Occupancy Controls
                                            • LED Open Case Lighting
                                            • LED Enclosed Case Lighting Refrigerated
                                            • LED Enclosed Case Lighting Freezer
                                              • Food Service
                                                • Beverage and Snack Machine Controls
                                                • ENERGY STARreg Refrigerated Beverage Vending Machines
                                                • ENERGY STARreg Electric Steam Cooker
                                                • ENERGY STARreg Electric Combination Oven
                                                • ENERGY STARreg Commercial Convection Oven
                                                • ENERGY STARreg Commercial Fryers
                                                • ENERGY STARreg Commercial Hot Holding Cabinet
                                                  • Motors and Variable Frequency Drives
                                                    • Early Replacement Motors
                                                    • Variable Frequency Drives on HVAC Fan Applications
                                                    • Variable Frequency Drives on Pump Applications
                                                    • Variable Speed Control for Kitchen Exhaust Hoods
                                                    • Variable Speed Drives for Process or Other Equipment
                                                      • Domestic Hot Water
                                                        • Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater
                                                        • Heat Pump Water Heater
                                                        • Low Flow Pre-Rinse Spray Valve
                                                        • Domestic Hot Water Incentive Table
                                                          • Compressed Air Systems
                                                            • No-loss Condensate Drain
                                                            • Air-Entraining air nozzle
                                                            • Storage Tanks for LoadNo Load Screw Compressors
                                                            • Cycling Refrigerated Thermal Mass Dryer
                                                            • Variable Speed Air Compressor
                                                            • Compressed Air System Optimization
                                                            • Compressed Air Systems Incentive Table
                                                              • Data Centers
                                                                • Air Cooled Chiller
                                                                • Air Cooled Chiller without Condenser
                                                                • Computer Room Air Conditioner
                                                                • Computer Room Air Handler Variable Speed
                                                                  • Replacing constant speed CRAH with VSD CRAH
                                                                    • Water Cooled Centrifugal Chiller
                                                                    • Water Cooled Positive Displacement or Reciprocating Chiller
                                                                    • Uninterruptible Power Supply
                                                                    • Mainframe Refresh
                                                                    • Server Refresh
                                                                      • Whole Building Systems
                                                                        • Whole Building Systems Approach
                                                                        • How to Apply for Whole Building Systems Incentives
                                                                        • Customer Eligibility
                                                                        • Project Eligibility
                                                                        • Whole Building Systems Incentives Table
                                                                          • Custom Project Specifications
                                                                            • Instructions for Energy Savings Calculations for Custom Projects
                                                                            • Equipment Information Submittals
                                                                            • Energy Savings Calculations
                                                                            • Baseline for Custom Analysis
                                                                            • Baseline or Existing System Summary

Building Exterior Space Description LPD

Unco erect Pariki Ilg Area Parlurng ots arnd Drives 0 15 WfW

B i ing Grournds W al 1Yays lless Hlan 11] e 10 Wltirneru- 00

W a Nays 10 middot de or greater 112 W

Plaza a reas

Spec rest re areas

Stainh1ays 1ow 2

B i ing 8ntrames and Exits Ma efilbies m wr near foot of door width

Other doors 2o w 1r ear foot of door width

Ctmqpies and Overhimgs Free starndillg and a ched tmd 12s w m2 m bullerhangs

0 door sales Op en areas (ind udi Ilg ve id e sales 05 W lo )

street frontage far vehicle sales lots 21] W linear toot in addi middot on to open are-0bullmiddot lo~nce

B i ing facades 0 2 W tfl2 middot or eacil illumirnated N311 or surface

o r 5 0 Wllinear root fo r eac h m n inated N3l1 o r

surface length

Automated te lle r rnachmiddot es a lld 210 W per loca tion plus 91] night deposito liies W 1pernddiliorml A I middot per

1oca middot om

Eirltrances and gatehouse inspecliion 125 W ffl2 o middot uncovered slatiaBS a goo~ ed acir ies area

Load ing are-0s or law enforcement 0 5 W 2 of u rnco1bullered area fire ambu rnce and otiher emergency service ibullehmiddotctes

Drive-through w indOWs a taslrood 400 W per drive-Hlrough restaurants

Parking near 24 -h our retail 80111 W per main entry entmn ces

HVAC Equipment Air-Source Air Conditioners and Air-Source Heat Pumps New unitary air conditioning units or air source heat pumps that meet or exceed the qualifying cooling efficiency shown in the HVAC Incentives Worksheet are eligible for an incentive They can be either split systems or single package units The efficiency of split systems is based on an ARI reference number All packaged and split system cooling equipment must meet Air Conditioning and Refrigeration Institute (ARI) standards (210240 320 or 340360) be UL listed use a minimum ozone-depleting refrigerant (eg HCFC or HFC) All required efficiencies are based on the Consortium for Energy Efficiency (CEE) high-efficiency commercial air conditioning and heat pump specifications (wwwcee1org) A manufacturerrsquos specification sheet indicating the system efficiency must accompany the application Disposal of the existing unit

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 24

must comply with local codes and ordinances

Package Terminal Systems (Replacements) Package terminal air conditioners and packaged terminal heat pumps are through-the-wall self-contained units that are 2 tons (24000 Btuh) or less All EER values must be rated at 95degF outdoor dry-bulb temperature

Ductless Mini-Split Heat Pump lt54 Tons Incentives are offered for Ductless Mini-Split Heat Pump lt54 Tons with SEER rating greater than or equal to 120 and EER greater than or equal to 145 and HSPF greater than or equal to 90

Geothermal Heat Pump Geothermal equipment is a high-efficiency groundwater source water source or ground source heat pump system that meets or exceeds the energy efficiency requirements shown in the tables below These measures do not apply to heat pump systems coupled with non-heat pump systems such as chillers rooftop AC units boilers or cooling towers which must be filed as custom measures All HVAC applications other than comfort cooling and heating such as process cooling must also be applied for as custom measures

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 25

HVAC Heating Qualifying Incentive

Equipment Type and Cooling Capacity Cooling Qualifying Efficiency ($ per cooling Measure Code Efficiency

ton)

Air Cooled Air Conditioner

H01 lt 54 tons (lt 65000 Btuhr) 15 SEER NA $22

H02 lt 54 and lt 11 25 tons

125 IEER $22 (lt 65 000 Btuh and lt 135 000 Btuhr) NA

H03 lt11 25 and lt 20 tons

123 IEER NA $22 (lt 135000 Btuh and lt 240000 Btuhr)

H04 lt 20 and lt 6333 tons (~

11 1 IEER NA $22 240000 Btuh and lt 760000 Btuhr)

HOS ~ 6333 Ions (~ 760000 Btuhr) 103 IEER NA $22

Air Cooled Heat Pumps

H06 lt 54 tons (lt 65000 Btuhr) 143 SEER 87 HSPF $30

H07 lt 54 and lt 11 25 tons

123 IEER 3 3 COP $30 (lt 65000 Btuh and lt 135000 Btuhr)

HOS lt11 25 and lt 20 tons

1U IEER 3 2 COP $30 (lt 135000 Btuh and lt 240000 Btuhr)

H09 lt 2000 tons (240000 Btuhr) 105 IEER 3 2 COP $30

Packaged Terminal Systems (PTAC and PTHP) (PTHP only)

H10 lt 8000 Btuhr (lt066 tons) 11 8 EER 33 $17

H11 ~8000 and lt10500 Btuhr (~066 and lt 0875 tons) 11 4 EER 32 $17

H12 gt10500 Btuhr ( 875 tons) 107 EER 31 $17

H22 lt 54 tons (lt 65000 Btuhr) 121 EER 12 3 IEER NA $22

lt 54 and lt 11 25 tons 121 EER 12 3 IEER $22 H23

(lt 65000 Btuh and lt 135000 Btuhr) NA

H24 lt11 25 and lt 20 tons

120 EER 12 2 IEER $22 (lt 135000 Btuh and lt 240000 Btuhr) NA

H25 lt20 and lt 633 tons

119 EER 12 2 IEER $22 (lt 240000 Btuh and lt 760000 Btuhr) NA

H26 ~ 633 tons( lt760000 Btuhr) 110 EER 11 1 IEER NA

$22

HVAC Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 26

Other HVAC EquipmentHotel Guest Room Occupancy Sensor Incentives are offered for occupancy-based controls that control electric air conditioning air source heat pumps and or electric heating units for individual hotel rooms Systems with nonshyelectric heat are not eligible Sensors must be controlled by automatic occupancy detectors or a key-card system and the default setting for controlled units differ by at least 5 degrees (or shut the unit fan and heating or cooling off completely) from the operating set point during unshyoccupied periods The control system may also be tied into other electric loads such as lighting and plug loads to shut them off when occupancy is not sensed The incentive is per room Replacement or upgrades of existing occupancy-based controls are not eligible as a prescriptive incentive

Economizer Integrated Dual Enthalpy Economizer ControlsThis measure is targeted to non-residential establishments whose HVAC equipment is not equipped with a functional economizer

Circulation Fan High-Volume Low-SpeedFans must be greater than 16 feet in diameter and have variable speed control

ECM Circulation Fan This measure is targeted to non-residential customers whose air handling equipment currently uses a SP or PSC fan motor rather than an ECM This measure applies only to circulating fan motors of 1 HP or less Above 1 HP motors are governed by NEMA standards and would see little to no efficiency benefit by adding an ECM The targeted fan can supply heating or cooling only or both heating and cooling

ECM Circulation Pump This measure is targeted for replacement of a shaded pole or permanent split capacitor pump or motor with an electronically commutated pump or motor le75 HP

Retrocomissioning Cooling Systems Confined to chiller plant andor isolated packaged units For reservation must contain proposal with defined scope at equipment level that demonstrates energy savings For final approval required final commissioning report including raw data (TAB reports) demonstrating actual scope

This prescriptive measure can be used for facilities with maximum cooling demand less than 1687 tons Larger systems require the use of custom HVAC measure

Retrocomissioning Whole Building Covers all relevant major mechanical systems such as chiller plant air side systems compressed air andor process systems For reservation must contain proposal with defined scope at equipment level that demonstrates energy savings For final approval required final commissioning report including raw data (TAB reports) demonstrating actual scope

This prescriptive measure can be used for facilities less than 404858 square feet Larger facilities require the use of custom HVAC measure

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 27

Energy Management System For installing a web-based building automation system in existing buildings that currently have no digital automated HVAC controls or have outdated pneumatic control systems with inoperable time control functions Existing HVAC control systems must not have time-of-day scheduling Upgrading obsolete EMS HVAC system with inoperable time clock functions will be reviewed on a case-by-case basis for incentive eligibility This incentive cannot be combined with incentives for programmable thermostats or setback-setup controls Must include the controls strategy and a scaled floor-plan with controlled areas highlighted HVAC BAS systems must be new and include bull Central time clock control bull Web-based interface with PC-based controls and graphic bull Building performance Tracking bull Open-protocol architecture controls system shall consist of either LonTalk (ANSICEA 7091) or BACNet (ASHRAE ANSI 135) protocol being used between all controlled and controlling devices and every node on the network bull Minimum setback period must exceed 2200 hours per year bull A minimum setback space temperature of at least 10degF when heating and 5degF when cooling bull Ability to adjust schedules and settings remotely over the internet bull Report generation describing energy and operating trends

This prescriptive measure can be used for facilities with maximum cooling demand less than 456 tons Larger systems require the use of custom HVAC measure

Demand Controlled Ventilation New ventilation controls must use carbon dioxide levels to measure occupancy and modify the percentage of outside air based on occupancy levels Only buildings with space heating and cooling requirements are eligible Conditioned spaces must be kept between 65ordmF and 75ordmF during occupied operating hours Carbon dioxide sensors must be installed in conjunction with fully functioning motor operated outside air dampers Dual temperature air-side economizers with zone-level CO2 sensors for rooftop units are eligible

This prescriptive measure can be used for facilities with maximum cooling demand less than 2210 tons Larger systems require the use of custom HVAC measure

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 28

Other HVAC Measures- consult project manual for eligibility specifications HVAC

Measure Incentive Unit Quantity Incentive

Measure Code er Unit

H1 8 Hotel Guest Room Occupancy Sensor Room $20

H1 9 Economizer Integrated Dual Enthalpy Economizer Controls Ton $1 5

H20 Circulation Fan High-Volume Low-Speed Unit $30

H21 ECM Circulation Fan Fan $1 5

H27 ECM Circulation Pump Pump $50

H28 Retrocommissioning Cooling Systems

Ton $750

H29 Retrocommissioning Whole Buidling

Square Foot $010

H29 Energy Management System Ton $2500

H30 Demand Controlled Ventilation Ton $2500

Other HVAC Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 29

Unitary HVAC Chillers

Air-Cooled Chillers Water Cooled Positive Displacement Reciprocating Chillers and Water Cooled Centrifugal Chillers Chiller applications including existing multiple chiller configurations (including redundant or lsquostand-byrsquo chillers) existing chillers serving multiple load groups and chillers in industrial applications are defined as non-standard applications and must follow a site-specific custom protocol $005kWh) rate

Incentives are offered for chillers with an IPLV value (expressed in kW per ton) that is less than or equal to the qualifying efficiency shown in the table below The chiller efficiency rating must be based on ARI Standard 550590-2003 for IPLV conditions The chillers must meet ARI standards 550590-2003 be UL listed and use a minimum ozone-depleting refrigerant (eg HCFC or HFC) The ARI net capacity value should be used to determine the chiller tons A manufacturerrsquos specification sheet with the rated kWton-IPLV or COP-IPLV must accompany the application along with the four point performance data that is the basis for the IPLV The application must include a certification that the chiller is appropriately sized for site design load conditions

Chillers must satisfy efficiency requirements for both full load and IPLV efficiencies for either Path A or Path B The table shows the minimum efficiency ratings to qualify for the prescriptive incentive which must be consistent with the expected operating conditions of the efficient chiller For example if the efficient chiller satisfies Path A and generally performs at part load the appropriate baseline chiller efficiency is the IPLV value under Path A If the efficient chiller satisfies Path B and generally performs at full load the appropriate baseline chiller efficiency is the full load value under Path B Generally chillers operating above 70 percent load for a majority (50 or more) of operating hours should use Path A and chillers below 70 load for the majority of operating hours should use Path B

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 30

C3 lt 75 tons

C4 75 tons and lt 150 tons

cs ~ 150 tons and lt 300 tons C6 ~ 300 tons

Water Cooled Centrifugal Chillers C7 lt 300 tons CB ~ 300 tons and lt 600 tons

C9 ~ 600 tons

Path A

Qualifying Full Load Efficiency

Qualifying IPLV Efficiency

Path B

Qualifying Full Load Efficiency

Qualifying IPLV Efficiency

0780 kWton 0567 kWton 0800 kWton 0540 kWton

0775 kWton 0554 kWton 0790 kWton 0527 kWton

0680 kWton 0522 kWton 0718 kWton 0486 kWton 0620 kWton 0486 kWton 0639 kWton 0441 kWton

0634 kWton 0536 kWton 0639 kWton 0405 kWton 0576 kWton 0494 kWton 0600 kWton 0360 kWton

0570 kWton 0494 kWton 0590 kWton 0360 kWton

I

Incentive ($ton)

$17

$17

Unitary Chiller Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 31

Refrigeration

Anti-Sweat Heater Controls Incentives are offered for devices that sense the relative humidity in the air outside of the display case and cycles or turns off the glass door (if applicable) and frame anti-sweat heaters when the ambient dew point is below a preset set point Technologies that can turn off anti-sweat heaters based on sensing condensation (on the inner glass pane) also qualify Incentive is based on the number of doors

Evaporator Fan Controls This measure is for the installation of controls in medium temperature walk-in coolers The controller reduces airflow of the evaporator fans when there is no refrigerant flow The measure must control a minimum of 120 HP where fans operate continuously at full speed The measure also must reduce fan motor power by at least 75 during the off cycle This measure is not applicable if any of the following conditions apply 1) Compressor runs all the time with high duty cycle 2) Evaporator fan does not run at full speed all the time 3) Evaporator fan motor runs on poly-phase power 4) Evaporator fan motor is not shaded-pole or permanent split capacitor (PSC) 5) Evaporator fan does not use off-cycle or time-off defrost

Floating Head Pressure Controls Controls must vary head pressure to adjust condensing temperatures in relation to outdoor air temperature Must replace existing constant pressure or manually controlled systems to achieve reduced head pressure in order to maintain a minimum saturated condensing temperature of 70 degF or a 20 degF variance below design heat pressure during mild weather conditions Compressor size must be at least 5 HP

Automatic Door Closers for Walk-In Coolers and Freezers The auto-closer should be applied to the main insulated opaque door(s) of a walk-in cooler or freezer The auto-closer must be able to firmly close that door when it is within one inch of full closure This must be a newly installed automatic door closer replacements on previously installed door closers are not eligible for an incentive

EC Motor for Walk-inReach-in Refrigerated cases or Freezer cases Incentives are offered for replacement of an existing standard-efficiency shaded-pole or permanent split capacitor evaporator fan motor in refrigerated display cases or fan coil in walk-ins The replacement unit must be an Electronically Commutated Motor (ECM) This measure cannot be used in conjunction with the Evaporator Fan Controller measure

ENERGY STAR Solid Door Freezer and Glass Door Freezer and Refrigerators Incentives are offered for replacement of existing self-contained refrigerators and freezers with units that are ENERGY STARreg listed Only units with built-in refrigeration systems are qualified Units with remote refrigeration systems or units do not qualify Customers must provide proof that the appliance meets the CEE or ENERGY STAR efficiency specifications using ASHRAE Standard 72-2005 (38degF plusmn 2degF) Incentive is per unit

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 32

Refrigeration Suction Pipe Insulation 1 Must insulate bare refrigeration suction lines of 1 58 inches in diameter or less on existing equipment only 2 Cooler lines require frac34 inch of flexible closed-cell nitrite rubber or an equivalent insulation 3 Freezer lines require 1-inch of flexible closed-cell nitrite rubber or an equivalent insulation 4 Insulation exposed to the outdoors must be protected from the weather (ie jacketed with a medium-gauge aluminum jacket)

Night Cover 1 Must install a cover on an existing open refrigerated display case to decrease its cooling load during off hours 2 The equipment manufacturer must not object to the use of night covers for the existing display case model 3 This rebate is based on the linear footage of the installed 4 The cover must be applied for a period of at least six hours

Strip Curtain on Walk-In CoolerFreezer 1 New strip curtains or plastic swinging doors must be installed on doorways of refrigerated spaces (conditioned to less than 50deg F) 2 Rebate is based on the linear footage of the doorway that the strip curtains are being installed in 3 Opening between the strip curtain and bottom of doorway must be no larger than 1 inch 4 Strips must have an overlay greater than 1 inch

Evaporator Coil Defrost Control 1The current system must include an operating electric defrost system with a functional electroshymechanical time clock 2 Evaporator coil temperature and pressure must be monitored by controller in order to determine optimal defrost cycles 3 New intelligent control systems to control the defrost systems will typically replace timed- defrost controls

Variable Speed Refrigeration Compressor This measure VSD control for refrigeration systems and its eligibility targets applies to retrofit construction in the commercial and industrial building sectors it is most applicable to grocery stores or food processing applications with refrigeration systems This protocol is for a VSD control system replacing a slide valve control system

Add Doors to Open Refrigerated Cases The eligible retrofit equipment is either no sweat doors or doors with anti-sweat heaters If a lighting retrofit is included with the new doors it must consume the same amount of energy or less energy than the old lighting Upgrades to lighting or other system components should be processed separately Horizontal cases are not eligible and should be processed as custom

Door Gaskets PECO Smart Ideas For Your Business CampI Program Application Manual

Q1 2017 pg 33

This measure is applicable to commercial refrigeration and applies to the replacement of worn-out gaskets with new better-fitting gaskets Applicable gaskets include those located on the doors of walk-in andor reach-in coolers and freezers This protocol applies to the main doors of both low temperature (ldquofreezerrdquo ndash below 32 degF) and medium temperature (ldquocoolerrdquo ndash above 32 degF) walk-ins

Zero Energy Doors For this measure a no-heatlow-heat clear glass door must be installed on an upright display case It is limited to door heights of 57 inches or more Doors must have either heat reflective treated glass be gas filled or both This measure applies to low temperature cases onlymdashthose with a case temperature below 0degF Doors must have 3 or more panes Total door rail glass and frame heater amperage ( 120 volt) cannot exceed 039413 amps per door for low temperature display cases Rebate is based on the door width (not including case frame)

Air Cooled Refrigeration Condenser Approach temperature lt8F for low temperature loads lt13F for medium temperature loads

Oversized Condenser with VFD New standalone condenser must no more than 150 larger than load

Case Light Occupancy Controls Acceptable for freezer or refrigerated cases as well as open cases or cases with doors

LED Open Case Lighting For replacing open case T8 or T12 fluorescent fixtures with DLC listed LEDs on refrigerators coolers and freezers

LED Enclosed Case Lighting Refrigerated LED case lighting with or without motion sensors on enclosed refrigerated vertical displays The baseline equipment is assumed to be cases with uncontrolled T8 or T12 linear fluorescent lamps

LED Enclosed Case Lighting Freezer LED case lighting with or without motion sensors on enclosed freezer vertical displays The baseline equipment is assumed to be cases with uncontrolled T8 or T12 linear fluorescent lamps

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 34

Refrigeration Measures Ref Measure

Measure Incentive Unit IncentiveUnit Code R01 Anti-Sweat Heater Controls Door $30

R02 Evaporator Fan Controls Controller $50

R03 Floating-head Pressure Controls HP $20

R04 Automatic Door Closers fo r Walk-in Coolers Door $75

R05 Automatic Door Closers fo r Walk-in Freezers Door $75

R06 Evaporator Fan EC Motor fo r Reach- in Cases Motor $35

RO Evaporator Fan EC Motor fo r Walk-in Cases Motor $50

R08 ENERGY STARreg Glass Door Freezer lt15 Cu Ft Unit $100

R09 ENERGY STARreg Glass Door Freezer 15- 49 Cu Ft Unit $125

R10 ENERGY STARreg Glass Door Freezer ~ 50 Cu Ft Unit $145

R11 ENERGY STARreg Solid Door Freezer Unit $75

R12 ENERGY STARreg Glass Door Refrigerator lt50 Cu Ft Unit $30

R13 ENERGY STARreg Glass Door Refrigerator gt= 50 Cu Ft Unit $50

K14 t NtKGY ~ I AKreg ~Olld Uoor Ketngerator $ OU Cu t-t Unit $~0

R15 Suction Pipe Insulation Walk-in Coolers Linear Foot $050

R16 Suction Pipe Insulation Walk in Freezers Linear Foot $075

R17 Night Cover Linear Foot $800

R18 Strip Curtains on Walk-in Cooler Linear Foot $250

R19 Evaporator Coil Defrost Control Controller $7500

R20 Variable Speed Refrigeration Compressor Compressor $85

R21 Add Doors to Open Refrigerated Cases Door $55

R22 Door Gaskets Door $250

R23 Zero Energy Doors Door $50

R24 A ir Cooled Refrigeration Condenser Ton $10

R25 Oversized Condenser with VFD Ton $10

R26 Case Light Occupancy Controls Door $8

R27 LED Open Cose Lighting Cose $10

R28 LED Enclosed Case Lighting Refrigerated Door $30

R30 LED Enclosed Case Lighting Freezer Door $30

Refrigeration Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 35

Food Service Beverage and Snack Machine Controls Incentives are offered for refrigerated vending machines that contain non-perishable bottled and canned beverages Controller for both types of systems must include a passive infrared occupancy sensor to turn off fluorescent lights and other energized machine systems when the surrounding area is unoccupied for 15 minutes or longer For the refrigerated machines the control logic may include periodic power up at 2-hour intervals or longer to maintain product temperature and provide compressor protection

ENERGY STARreg Refrigerated Beverage Vending Machines Incentives are offered for ENERGY STARreg beverage vending machines Qualifying machines can be found at httpswwwenergystargovproductsothervending_machines

ENERGY STARreg Electric Steam Cooker This measure applies to the installation of electric ENERGY STAR steam cookers as either a new item or replacement for an existing unit Gas steam cookers are not eligible The steam cookers must meet minimum ENERGY STAR efficiency requirements A qualifying steam cooker must meet a minimum cooking efficiency of 50 percent and meet idle energy rates specified by pan capacity

ENERGY STARreg Electric Combination Oven This measure applies to electric ovens capable of handling single 12 x 20 x 25 pan per rack

ENERGY STARreg Commercial Convection Oven The oven must meet or exceed heavy load potato cooking energy efficiency of greater than 70 utilizing ASTM Standard F149 Applies only to electric ovens

ENERGY STARreg Commercial Fryers The commercial fryer must have a tested heavy load (French fry for large vats) cooking energy efficiency of greater than 80 utilizing American Society for Testing and Materials (ASTM) Standard F1361 for commercial fryers and ASTM Standard F2144 for large vat fryers Multiple vat configurations are paid per qualifying vat ENERGY STAR maintains a list of qualifying products and specifications at httpwwwenergystargov

ENERGY STARreg Commercial Hot Holding Cabinet Energy STAR rating electric

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 36

Food Service amp Other Measures FoodOther

Measure Incentive Unit Incentive

Measure Code Unit

F01 Beverage Machine Controls Unit $25

F02 Snack Machine Controls Unit $20

F03 ENERGY STARreg Refrigerated Beverage Vending Machir Unit $125

F04 ENERGY STARreg Commerc ial Steam Cooker Unit $200

F05 ENERGY STARreg Electric Combination Oven Unit $200

F06 ENERGY STARreg Commercial Electric Convection Oven Unit $150

F07 ENERGY STARreg Commerc ial Fryers Unit $100

F08 ENERGY STARregCommerc ial Hot Holding Cabinet Unit $200

Food Service Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 37

Motors and Variable Frequency DrivesEarly Replacement Motors For constant speed and uniformly loaded motors this measure applies to the replacement of old motors with new energy efficient motors of the same rated horsepower Old motors must be less than 15 years Replacements where the old motor and new motor have different horsepower ratings are considered custom measures Motors with variable speeds variable loading or industrial-specific applications are also considered custom measures

Motors Incentive Table Motors

Measure Code

HP Incentive per Motor

M01 15 - 10 $40 M02 11 - 50 $100 M03 51-100 $150 M04 gt100 $300

Only VFDs on unitary systems are eligible Non-unitary systems must be submitted as a custom measure Soft start motors are not eligible

Variable Frequency Drives on HVAC Fan Applications Incentives are offered for installing VFDs on existing HVAC fans that do not have pre-existing VFDs This measure applies to HVAC supply and return fans only All other fans including cooling tower fans must be submitted as custom measures Manually fixed speed settings on HVAC fans must be submitted via custom application The VFD must control motor speed automatically in response to pressure flow temperature or other variable signal The installation of a VSD must accompany the permanent removal or disabling of any throttling devices such as inlet vanes bypass dampers and throttling valves etc The incentive is offered per controlled HP

Variable Frequency Drives on Pump Applications Incentives are offered for installing VFDs on existing chilled water pumps and heating hot water pumps that do not have existing VFDs This measure applies to chilled water pumps and heating hot water pumps only All other pumps must be submitted as custom measures Manually fixed speed settings on pumps must be submitted via custom application The VFD must control motor speed automatically in response to pressure flow temperature or other variable signal The installation of a VSD must accompany the permanent removal or disabling of any throttling devices such as throttling valves The incentive is offered per controlled HP

Variable Speed Control for Kitchen Exhaust Hoods The measure consists of installing a new VSD in conjunction with a sensor control system that varies the exhaust rate of kitchen ventilation (exhaust andor makeup air fans) based on the heat and effluent output from the cooking appliances (ie the more heat and smokevapors generated the more ventilation needed) This involves installing a temperature sensor in the hood exhaust collar andor an optic sensor on the end of the hood that senses cooking conditions and allows the system to automatically vary the rate of exhaust to match requirements by adjusting the fan speed accordingly

Variable Speed Drives for Process or Other Equipment VFD must be used in conjunction with a process (non HVAC) application To qualify for this incentive the driven equipment must operate at least 2000 hours per year Redundant or back- up units do not qualify VFDs replacing existing VFDs do not qualify The VFD must control motor

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 38

speed automatically in response to pressure flow temperature or other variable signal VFDs installed as ldquosoft startrdquo without automatic manual closed loop speed control do not qualify The installation of a VFD must accompany the permanent removal or disabling of any throttling devices such as throttling valves The incentive is per controlled HP and only applies to controlled motors less than 50 HP

VSDVFD Incentives Table VFD

Measure Code

Measure Unit Incentive per Unit

Fan Application

V01 VFD on HVAC Fan HP $25 Pump Application

Variable Speed Control for Kitchen Exhaust Hoods

Variable Speed Drives for Process or Other Equipment

V02 VFD on Chilled Water Pumps HP $25 V03 VFD on Heating Hot Water Pumps HP $25

V04 Kitchen Exhaust Fan Retrofit Hood HP $500

V05 Process Motor lt 50 HP HP $50

Domestic Hot Water Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater This measure documents the energy savings attributed to converting from a standard electric water heater to an ENERGY STAR natural gaspropane-fired water heater or a standard oil-fired water heater with an Energy Factor of 0585

Heat Pump Water Heater This includes heat pump water heaters with energy factors meeting ENERGY STAR criteria The measure described here involves a direct retrofit of a resistive electric water heater with a heat pump water heater It does not cover systems where the heat pump is a pre-heater or is combined with other water heating sources More complicated installations can be treated as custom projects

Low Flow Pre-Rinse Spray Valve This measure applies to efficient low flow pre-rinse sprayers in grocery and food service applications The most likely areas of application are kitchens in restaurants and hotels Only premises with electric water heating may qualify for this incentive In addition the replacement pre-rinse spray nozzle must use less than 16 gallons per minute with a cleanability performance of 26 seconds per plate or less Low flow pre-rinse sprayers reduce hot water usage and save energy associated with water heating

Domestic Hot Water Incentive Table

Measure Code Measure Unit Retrofit Incentive per

Unit

W01 Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater Unit $100

W02 Heat Pump Water Heater Unit $100 W03 Low-Flow Pre-Rinse Spray Valve Valve $17

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 39

Compressed Air SystemsNo-loss Condensate Drain No-loss Condensate Drains are controlled by a sensor that monitors the level of condensate and only open when there is a need to drain condensate They close before compressed air is allowed to escape This measure is targeted to non-residential customers whose equipment is a timed drain that operates on a pre-set schedule Acceptable baseline conditions are compressed air systems with standard condensate drains operated by a solenoid and timer

Air-Entraining air nozzle This measure is targeted to non-residential customers whose compressed air equipment uses stationary air nozzles in a production application with an open copper tube of 18rdquo or 14rdquo orifice diameter Energy efficient conditions require replacement of an inefficient non-air entraining air nozzle with an energy efficient air-entraining air nozzle that use less than 15 CFM at 100 psi for industrial applications

Storage Tanks for LoadNo Load Screw Compressors This measure protocol applies to the installation of air receivers with pressureflow controls to loadno load compressors Loadno load compressors unload when there is low demand The process of unloading is done over a period of time to avoid foaming of the lubrication oil Using a storage tank with pressureflow control will buffer the air demands on the compressor Reducing the number of cycles in turn reduces the number of transition times from load to no load and saves energy The baseline equipment is a loadno load compressor with a 1 galcfm storage ratio or a modulating compressor with blowdown The high efficiency equipment is a loadno load compressor with a minimum storage ratio of 4 gallons of storage per cfm

Cycling Refrigerated Thermal Mass Dryer When air is compressed water vapor in the air condenses and collects in liquid form Some of this condensate collects in the air distribution system and can contaminate downstream components such as air tools with rust oil and pipe debris Refrigerated air dryers remove the water vapor by cooling the air to its dew point and separating the condensate Changes in production and seasonal variations in ambient air temperature lead to partial loading conditions on the dryer Standard air dryers use a hot gas bypass system that is inefficient at partial loads A Cycling Thermal Mass Dryer uses a thermal storage medium to store cooling capacity when the system is operated at partial loads allowing the dryer refrigerant compressor to cycle

This measure is targeted to non-residential customers whose equipment is a non-cycling refrigerated air dryer with a capacity of 600 cfm or below Acceptable baseline conditions are a non-cycling (eg continuous) air dryer with a capacity of 600 cfm or below The replacement of desiccant deliquescent heat-of-compression membrane or other types of dryers does not qualify under this measure

Variable Speed Air Compressor This type of compressor uses a special drive to control the speed (RPM) of the unit which in turn saves energy compared to a fixed speed equivalent

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 40

No-loss Condensate Drain Air-Entraining Air Nozzle Cycling Refrigerated Thermal Mass Dryer

Compressor Incentive per

Equipment Type Units Quantity Daily Operating Unit

Hours

CA04 Storage Tanks for LoadNo Load Screw

Compressor HP $10 Compressors

CA05 Variable Speed Air Compressor

Compressor HP $30

CA06 Compressed Air System Optimization

Compressor HP $50

Compressed Air System Optimization The submitted optimization measures must be identified in an Air System Audit or equivalent study to be eligible The measures must demonstrate energy savings as evaluated by a Program Engineer Additionally measures must also fall under one or more of the category below to be eligible

1) Install storage Receivers (new receivers only replacing existing storage receivers are ineligible)

2) Compressor control (must demonstrate improvement in partial load efficiency of the compress air system including reduceeliminate partially loaded units)

3) Dryer control 4) Source pressure reduction 5) Right-sizing distribution components such as piping filters regulators

connectors and hoses (routine maintenance replacements are ineligible) 6) Leakage detection and repair 7) Eliminate low-efficiency end-usages of compressed air 8) Heat recovery (most reduce electricity consumption of the replaced heat source)

Compressed Air Systems Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 41

lt65000 Btuh

~ 65000 Btuh and lt135000 Btuh

135000 Btuhand lt240000 Btuh

240000 Btuh and lt760000 Btuh

760000 Btuh

154

142

135

125

123

Chiller Capacity Path APath B efficiency (kWton )

lt 150 tons

~150 tons and lt300 tons

300 tons and lt400 tons

400 tons and lt600 tons

600 tons

lt75 tons

~75 tons and lt150 tons

~150 tons and lt300 tons

~300 tons and lt600 tons

600 tons

0610 FU0695 FL and 0550 IPLV0440 IPLV

0610 FU0635 FL and 0550 IPLV0400 IPLV

0560 FU0595 FL and 0520 IPLV0390 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

Path APath B efficiency (kWton )

0750 FU0780 FL and 0600 IPLV0500 IPLV

0720 FU0750 FL and 0560 IPLV0490 IPLV

0660 FU0680 FL and 0540 IPLV0440 IPLV

0610 FU0625 FL and 0520 IPLV0410 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

Data Centers Data Center incentives are available for facilities ranging in size from office server closets to large standalone facilities

Air Cooled Chiller Path APath B EER (BtuWh) lt150 tons 101 FL97 FL and 137 IPLV158 IPLV ge150 tons 101 FL97 FL and 140 IPLV161 IPLV

Air Cooled Chiller without Condenser Air-cooled chillers without condenser must be rated with matching condensers and comply with air-cooled chiller efficiency requirements

Computer Room Air Conditioner

Computer Room Air Handler Variable Speed Replacing constant speed CRAH with VSD CRAH

Water Cooled Centrifugal Chiller

Water Cooled Positive Displacement or Reciprocating Chiller

Uninterruptible Power Supply Must be Energy Star Certified UPS or have full load efficiency rating

ge948 for 20-100 kVA ge978for ge100 kVA

Mainframe Refresh The rated efficiency of the replacement Mainframes power supply must be at least 8 more

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 42

- Equipment Type Units IncentiveUnit

D1 Air Cooled Chiller Ton $4000 D2 Air Cooled Chiller W ithout Condenser Ton $2000 D3 Computer Room Air Conditioner Ton $3000 D4 Computer Room Air Handler Variable Speed Ton $1000 D5 Water Cooled Centrifugal Chiller Ton $3000 D6 Water Cooled Positive Displacement or Reciprocatin $3000 D7 Uninterruptible Power Supply 20-100 kVA $1000 D8 Uninterruptible Power Supply gt 100 kVA $1000 D9 Mainframe Refresh $2000

D10 Server Refresh $2000 D11 PC Power Managment System $600 D12 HVAC System Optimization $005 D1 3 HoUCold Aisle Containment kWh saved $005 D14 Server Virtualization kW reduction $40000 D1 5 Thin Clients Units $500

efficient compared to the existing Mainframes power supply The replacement Mainframe if Inactive must be decommissioned and removed from the Data Center

Server Refresh Replacement servers must be ENERGY STARreg certified Replacement servers power supply must be 5 more efficiency compared to the power supply of the replaced servers The replaced server must be decommissioned and removed from the data center

HVAC System Optimization Final system must have these features

-Implementation of free cooling by the addition of an economizer system -Conversion of constant speed CRACCRAH into variable speed operations using VFDs and additional control functionalities and -Elevation of exhaust air temperature

HotCold Aisle Containment Includes both Hot and Cold Aisles Installing new containment measures not replacing already existed aisle containment Plenum-only installations not eligible Must result in higher difference between the return air (hot aisle) and supply air (cold aisle) temperatures measured at rack intake and exhaust locations

Server Virtualization Minimum of consolidating 5 Servers virtualized into one Server The virtualized servers if inactive are removed from the Data Center

Thin Clients Must be ENERGY STAR certified thin clients Decommissioned clients are removed from the Data Center

Data Center Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 43

Whole Building Systems Whole Building Systems Approach

The Whole Building Systems approach is intended to encourage integrated energy efficient designs by providing enhanced incentives to the customer who addresses overall energy performance Owners of eligible and qualifying new construction and major renovation projects can receive Whole Building Systems incentives when energy modeling indicates the projectrsquos performance is over 10 better than the ASHRAE 901-2007 Savings from eligible electric end-uses in kilowatt hours define the amount of financial incentive Energy savings achieved through renewable energy sources are not counted toward project energy savings and are not included in the savings basis Incentive reservations obtained during the design phase of a project will be honored for up to 24 months

How to Apply for Whole Building Systems Incentives Before construction begins bull A Pre-notification Application must be submitted documenting the Owners intention to

seek Whole Building Systems incentives bull The Owner must confirm the goals and energy efficiency strategies being pursued by the

design team on the completed Pre-notification Worksheet (Checklist tab) and in the project Summary (Whole Building Performance Summary tab)

bull Submit executable building modeling software files bull Submit the Whole Building Performance Summary worksheet energy simulation model

inputs and outputs and supporting documentation bull Receive confirmation and eligibility notification from the PECO Smart Ideas team and

receive an incentive reservation bull The final incentive paid may differ from the reserved incentive amount The final

incentive will be calculated based on site-verified equipment installation and performance The Owners final application and complete documentation must be received within 6 months of equipment installation or certificate of occupancy whichever is later

bull An executable energy model and model output demonstrating compliance with the criteria of ASHRAE 901-2007 Appendix G will be required and the equipment data sheets LED lighting fixtures must be on the DLC or Energy STAR qualified products list (QPL) to be eligible LED fixtures not on the DLC or Energy STAR QPL has the option of submitting LM79 and LM80 test reports for evaluation against DLC and Energy STAR eligibility criteria

During the construction period bull Owner and design team continue to work closely with their chosen contractor to assure

energy efficiency measures are included and installed in the completed building

When the building is constructed and operational bull Complete the Owner final application Request an equipment verification site visit by the

PECO Smart Ideas team Equipment must be installed and fully operational o Program staff will schedule a site visit and utilize submitted documentation and

measurement tools to verify that the installation follows the submitted energy simulation model

bull When PECO confirms that there are no significant changes to the installed equipment payment of the reserved incentive will be made to the Owner within 6 weeks

bull If changes from the proposed design energy simulation are found the Owner and design team will be notified of the reduced incentive amount a period of 20 calendar days will

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 44

Improvement Incentive per Sq Ft

over Code

~11 to lt20 $0155

~20 to lt30 $0233

~30 to lt40 $0350

~40 to lt60 $0525

~60 $0700

be allowed for supplemental information to be provided if no additional information is received by PECO Smart Ideas team the reduced incentive payments will be made and sent to the Owner if additional clarification and information is available program staff will work diligently to resolve the discrepancies and arrive at a reasonable incentive adjustment with the customer

Payments made by PECO Smart Ideas are final

Customer Eligibility The Owner of the proposed new building project must be a customer of PECO and receive delivery of electric service from PECO to receive kilowatt-hour based incentives Please note that electricity supply can be provided by any vendor

Project Eligibility bull The project must be a new construction or major renovation Major renovations involving

the removal and redesign of at least two building systems (such as interior lighting and mechanical systems) may apply for Whole Building Systems incentives

bull To qualify for incentives projects must demonstrate energy efficiency enhancements that achieve at least 11 improvement in the proposed design versus the standard baseline

bull The Owner must submit a Pre-approval Application to the program at the stage where changes for increased energy efficiency are still feasible and construction has not been completed

bull Projects receiving Whole Building Systems incentives are not eligible to receive other incentives such as the prescriptive or custom program incentives for the same scope

bull Project components that are NOT eligible for consideration as a basis for PECO Smart Ideas include the following o Alternative fuel sources (eg use of gas or oil equipment in lieu of electric) Please note

that combined heat and power (CHP) systems will be incentivized for the electricity they produce

o Renewable energy sources (eg solar wind biomass) bull Ineligible savings include exterior lighting process receptacle miscellaneous loads and

other unregulated end-uses Custom incentives are available for new construction exterior lighting

Whole Building Systems Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 45

Custom Project Specifications Instructions for Energy Savings Calculations for Custom Projects Custom projects must involve measures that result in a reduction in electric energy use (kWh) Electricity savings may result from either efficiency improvements or fuel switching Custom Incentives are based on the first year kilowatt-hour savings Custom applications must be accompanied by detailed engineering calculations that document the annual total energy savings

The following serve as guidelines for the minimum required documentation

Equipment Information Submittals bull A list of the present and proposed equipment and components to be installed

including manufacturerrsquos catalogmodel number bull Manufacturerrsquos specification sheets showing capacities and performance for all major

components

Energy Savings Calculations Provide calculations documenting the predicted energy consumption of the existing (or baseline) and proposed system using appropriate analytical tools and clearly stated assumptions Calculations may be performed by ldquohandrdquo but spreadsheet analysis or more rigorous modeling is preferred All analysis should be provided in electronic format All assumptions such as operating hours existing and proposed equipment operational details must be presented Engineering algorithms and procedures from recognized technical organizations such as ASHRAE SMACNA ANSI etc must be used Use rated performance factors tested under accepted procedures specified by recognized rating agencies such as AHRI ANSI ASTM etc Provide an explanation when equipment performance rating conditions vary from standard conditions

In support of the calculations extensive documentation must be provided that provides the basis for the savings estimates The documentation must provide information on the equipment operating schedule daily and seasonal load profile and baseline AND energy efficient equipment performance at the operating loads Typical documentation for custom projects often includes bull Engineering or architectural drawings and ldquoequipment schedulerdquo sheets bull Component specification sheets that include part load efficiency or performance

factors bull Spreadsheet calculations or inputoutput files and results from system modeling or

other engineering analysis using accepted engineering algorithms and practices bull Log sheets trend logs from a building management system or other operating

documentation that are often necessary to document operating hours and equipment loading and used as a basis for the calculations (in some cases short term monitoring may be required to document the load profile)

bull Control sequence of operations that are necessary where controls play a part in the savings equation

Additional documentation other than that described in the application may be required for program participation Larger projects may also require pre- and post-project sub metering or monitoring of loads andor power input as part of another measurement and verification activity to demonstrate the actual energy savings that are realized

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 46

Baseline for Custom Analysis Where equipment is replaced prior to the end of its rated service life in order to achieve energy savings the existing equipment performance may be used as the baseline in the energy savings calculations Where equipment is replaced due to failure or for other reasons (such as obsolescence or a need for more capacity) the baseline performance used in the savings calculation should be either the minimum performance that would be required by code for that equipment type and application (where a code applies) or the performance of the equipment that would have been selected as the customers standard practice when a code does not apply

Baseline or Existing System Summary On custom worksheet on application form include make model number name plate information (such as operating voltage and rated full load amps) rated capacity quantities equipment condition and age facility operating hours equipment operating schedule and load curves If needed attach separate sheets

All decisions regarding incentives for custom projects are in the sole discretion of PECO

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 47

APPENDIX PROGRAM UPDATES SUMMARY (Q1 2017) Multifamily Nursing Home and Assisted Living retrofit customers need to apply for incentives through the PECO Smart Ideas Multi-Family Program administered by Franklin Energy For more information please contact Taylor Adler at tadlerfranklinenergycom or call 1-844-4BIZ-SAVE Multifamily Nursing Home and Assisted Living new construction customers can proceed with applying for incentives here

Revised Incentives

Data Centers

Measure Incentive Effective Immediately Previous Incentive

Air-cooled chiller for data centers $40ton $10ton Air-cooled chiller without condenser for data centers $20ton $10ton

Computer room air conditioner $30ton $7ton Water-cooled centrifugal chiller for data centers $30ton $5ton Water-cooled positive displacement or reciprocating chiller for data centers

$30ton $5ton

Uninterruptible power supply 20-100 kVA $10kVA $6kVA Uninterruptible power supply gt100 kVA $10kVA $1kVA Mainframe refresh $20kW installed $5kW installed Server refresh $20kW installed $4kW installed Server virtualization $400kW reduction $4kW reduction Thin clients $5units $4units

Lighting (Effective Immediately)

Measure Incentive Effective Immediately Specification Previous

Incentive Specification

New construction exterior LED outdoor flood light LED parking garage and canopy lighting LED polearm mounted parking and roadway lighting LED wall mount fixture

$005kWh (custom)

Lighting Power Density (LPD) Requirements Unchanged

$10-54 fixture

Lighting Power Density (LPD) (Wft2) by Space Type or Building Area

LED Replacement Lamps (Tubes) 2

$250lamp 5 Min Watts Reduced

$250lamp 6 Min Watts Reduced

LED Replacement Lamps (Tubes) 4

$400lamp 10 Min Watts Reduced

$400lamp 12 Min Watts Reduced

Permanent Fixture Removal $010Watt removed

Clarification of calculation to represent actual Wattage removed

$010Watt removed

Lighting (Effective 6117)

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 48

Measure Incentive Effective 6117 Specification Previous

Incentive Previous Specification

Interior LED high-bay fixtures andor retrofit kits if lt 20000 LED Lumens

$50fixture 150 Min Watts Reduced

$75fixture 150 Min Watts Reduced

Interior LED high-bay fixtures andor retrofit kits if gt 20000 LED Lumens

$75fixture 225 Min Watts Reduced

$75fixture 150 Min Watts Reduced

New Incentives

Compressed Air

Measure New Incentive Effective Immediately Variable speed air compressor $30compressor HP Compressed air system optimization $50compressor HP

HVAC

Measure New Incentive Effective Immediately ECM circulation pump $50pump Retro-commissioning cooling systems $750ton Retro-commissioning whole building $010square foot Energy management system $25ton Demand controlled ventilation $25ton Water-cooled air conditioner $22ton

Food Service

Measure New Incentive Effective Immediately Combination oven $200unit ENERGY STARreg commercial convection oven $150unit ENERGY STARreg commercial fryers $100unit ENERGY STARreg commercial hot holding cabinet $200unit

Refrigeration

Measure New Incentive Effective Immediately Air-cooled refrigeration condenser $10ton Oversized condenser with VFD $10ton Case light occupancy controls $750door

Lighting

Measure New Incentive Effective Immediately Interior central lighting controls $00175sq foot

Motors and Drives

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 49

-

Measure New Incentive Effective Immediately VFD for dust collection system motor $50HP

Application Clarifications and Revised Requirements

Clarification of LED Eligibility for New Construction or Retrofit Projects

LED Eligibility is determined by whether lighting products are listed in either the DesignLights Consortium (DLC) Qualified Products List of commercial-grade LED luminaires or the US Environmental Protection Agency database of ENERGY STAR certified products For products not yet listed contractors may submit LM79 and LM80 test reports PECO Smart Ideas engineers will review test reports to determine if the product in question meets performance specifications

Revised W 9 Requirement

W-9 forms EIN numbers are no longer required

Deletion of erroneous statement in New Construction Lighting

The following statement from previous Business Manual has been deleted ldquoThe minimum lighting power density used to calculate the incentive shall be no lower than 50 of the ASHRAE 901-2007 valuerdquo

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 50

  • Commercial amp Industrial Program Application Manual
    • Follow This Easy Process
      • Pre-Approval Application Checklist
      • Final Application Checklist
          • Terms and Conditions
            • Program Effective Dates
            • Program and Project Eligibility
            • Incentive Payment Limits
            • Application Review Process
            • Inspections andor PUCrsquos Statewide Program Evaluation
            • Requirements for Custom Project Electricity Savings Calculation
            • Tax Liability
            • No Endorsement
            • Warranties
            • Limitation of Liability
            • Assignment
            • Customerrsquos Certification
            • Termination
            • Acknowledgement
              • Retrofit Lighting Solutions
                • General Linear Fluorescent Lamp and Ballast Specification Requirements
                • LED Lamps and Fixtures
                • Minimum Watts Reduced
                • Linear LED (Tubes)
                • Permanent Fixture Removal
                  • LED Traffic Signals
                    • LED Traffic Signals Incentive Table
                      • New Construction Lighting Specifications
                        • New Construction Lighting Incentives Table
                          • New Construction Lighting Power Density Code
                              • Exterior New Construction Lighting
                              • HVAC Equipment
                                • Air-Source Air Conditioners and Air-Source Heat Pumps
                                • Package Terminal Systems (Replacements)
                                • Ductless Mini-Split Heat Pump lt54 Tons
                                • Geothermal Heat Pump
                                  • Other HVAC Equipment
                                    • Hotel Guest Room Occupancy Sensor
                                    • ECM Circulation Fan
                                    • ECM Circulation Pump
                                    • Retrocomissioning Cooling Systems
                                    • Retrocomissioning Whole Building
                                    • Energy Management System
                                    • Demand Controlled Ventilation
                                    • Other HVAC Incentives Table
                                      • Unitary HVAC Chillers
                                        • Air-Cooled Chillers Water Cooled Positive Displacement Reciprocating Chillers and Water Cooled Centrifugal Chillers
                                          • Refrigeration
                                            • Anti-Sweat Heater Controls
                                            • Evaporator Fan Controls
                                            • Floating Head Pressure Controls
                                            • Automatic Door Closers for Walk-In Coolers and Freezers
                                            • EC Motor for Walk-inReach-in Refrigerated cases or Freezer cases
                                            • ENERGY STAR Solid Door Freezer and Glass Door Freezer and Refrigerators
                                            • Refrigeration Suction Pipe Insulation
                                            • Night Cover
                                            • Strip Curtain on Walk-In CoolerFreezer
                                            • Evaporator Coil Defrost Control
                                            • Variable Speed Refrigeration Compressor
                                            • Add Doors to Open Refrigerated Cases
                                            • Door Gaskets
                                            • Zero Energy Doors
                                            • Air Cooled Refrigeration Condenser
                                            • Oversized Condenser with VFD
                                            • Case Light Occupancy Controls
                                            • LED Open Case Lighting
                                            • LED Enclosed Case Lighting Refrigerated
                                            • LED Enclosed Case Lighting Freezer
                                              • Food Service
                                                • Beverage and Snack Machine Controls
                                                • ENERGY STARreg Refrigerated Beverage Vending Machines
                                                • ENERGY STARreg Electric Steam Cooker
                                                • ENERGY STARreg Electric Combination Oven
                                                • ENERGY STARreg Commercial Convection Oven
                                                • ENERGY STARreg Commercial Fryers
                                                • ENERGY STARreg Commercial Hot Holding Cabinet
                                                  • Motors and Variable Frequency Drives
                                                    • Early Replacement Motors
                                                    • Variable Frequency Drives on HVAC Fan Applications
                                                    • Variable Frequency Drives on Pump Applications
                                                    • Variable Speed Control for Kitchen Exhaust Hoods
                                                    • Variable Speed Drives for Process or Other Equipment
                                                      • Domestic Hot Water
                                                        • Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater
                                                        • Heat Pump Water Heater
                                                        • Low Flow Pre-Rinse Spray Valve
                                                        • Domestic Hot Water Incentive Table
                                                          • Compressed Air Systems
                                                            • No-loss Condensate Drain
                                                            • Air-Entraining air nozzle
                                                            • Storage Tanks for LoadNo Load Screw Compressors
                                                            • Cycling Refrigerated Thermal Mass Dryer
                                                            • Variable Speed Air Compressor
                                                            • Compressed Air System Optimization
                                                            • Compressed Air Systems Incentive Table
                                                              • Data Centers
                                                                • Air Cooled Chiller
                                                                • Air Cooled Chiller without Condenser
                                                                • Computer Room Air Conditioner
                                                                • Computer Room Air Handler Variable Speed
                                                                  • Replacing constant speed CRAH with VSD CRAH
                                                                    • Water Cooled Centrifugal Chiller
                                                                    • Water Cooled Positive Displacement or Reciprocating Chiller
                                                                    • Uninterruptible Power Supply
                                                                    • Mainframe Refresh
                                                                    • Server Refresh
                                                                      • Whole Building Systems
                                                                        • Whole Building Systems Approach
                                                                        • How to Apply for Whole Building Systems Incentives
                                                                        • Customer Eligibility
                                                                        • Project Eligibility
                                                                        • Whole Building Systems Incentives Table
                                                                          • Custom Project Specifications
                                                                            • Instructions for Energy Savings Calculations for Custom Projects
                                                                            • Equipment Information Submittals
                                                                            • Energy Savings Calculations
                                                                            • Baseline for Custom Analysis
                                                                            • Baseline or Existing System Summary

must comply with local codes and ordinances

Package Terminal Systems (Replacements) Package terminal air conditioners and packaged terminal heat pumps are through-the-wall self-contained units that are 2 tons (24000 Btuh) or less All EER values must be rated at 95degF outdoor dry-bulb temperature

Ductless Mini-Split Heat Pump lt54 Tons Incentives are offered for Ductless Mini-Split Heat Pump lt54 Tons with SEER rating greater than or equal to 120 and EER greater than or equal to 145 and HSPF greater than or equal to 90

Geothermal Heat Pump Geothermal equipment is a high-efficiency groundwater source water source or ground source heat pump system that meets or exceeds the energy efficiency requirements shown in the tables below These measures do not apply to heat pump systems coupled with non-heat pump systems such as chillers rooftop AC units boilers or cooling towers which must be filed as custom measures All HVAC applications other than comfort cooling and heating such as process cooling must also be applied for as custom measures

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 25

HVAC Heating Qualifying Incentive

Equipment Type and Cooling Capacity Cooling Qualifying Efficiency ($ per cooling Measure Code Efficiency

ton)

Air Cooled Air Conditioner

H01 lt 54 tons (lt 65000 Btuhr) 15 SEER NA $22

H02 lt 54 and lt 11 25 tons

125 IEER $22 (lt 65 000 Btuh and lt 135 000 Btuhr) NA

H03 lt11 25 and lt 20 tons

123 IEER NA $22 (lt 135000 Btuh and lt 240000 Btuhr)

H04 lt 20 and lt 6333 tons (~

11 1 IEER NA $22 240000 Btuh and lt 760000 Btuhr)

HOS ~ 6333 Ions (~ 760000 Btuhr) 103 IEER NA $22

Air Cooled Heat Pumps

H06 lt 54 tons (lt 65000 Btuhr) 143 SEER 87 HSPF $30

H07 lt 54 and lt 11 25 tons

123 IEER 3 3 COP $30 (lt 65000 Btuh and lt 135000 Btuhr)

HOS lt11 25 and lt 20 tons

1U IEER 3 2 COP $30 (lt 135000 Btuh and lt 240000 Btuhr)

H09 lt 2000 tons (240000 Btuhr) 105 IEER 3 2 COP $30

Packaged Terminal Systems (PTAC and PTHP) (PTHP only)

H10 lt 8000 Btuhr (lt066 tons) 11 8 EER 33 $17

H11 ~8000 and lt10500 Btuhr (~066 and lt 0875 tons) 11 4 EER 32 $17

H12 gt10500 Btuhr ( 875 tons) 107 EER 31 $17

H22 lt 54 tons (lt 65000 Btuhr) 121 EER 12 3 IEER NA $22

lt 54 and lt 11 25 tons 121 EER 12 3 IEER $22 H23

(lt 65000 Btuh and lt 135000 Btuhr) NA

H24 lt11 25 and lt 20 tons

120 EER 12 2 IEER $22 (lt 135000 Btuh and lt 240000 Btuhr) NA

H25 lt20 and lt 633 tons

119 EER 12 2 IEER $22 (lt 240000 Btuh and lt 760000 Btuhr) NA

H26 ~ 633 tons( lt760000 Btuhr) 110 EER 11 1 IEER NA

$22

HVAC Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 26

Other HVAC EquipmentHotel Guest Room Occupancy Sensor Incentives are offered for occupancy-based controls that control electric air conditioning air source heat pumps and or electric heating units for individual hotel rooms Systems with nonshyelectric heat are not eligible Sensors must be controlled by automatic occupancy detectors or a key-card system and the default setting for controlled units differ by at least 5 degrees (or shut the unit fan and heating or cooling off completely) from the operating set point during unshyoccupied periods The control system may also be tied into other electric loads such as lighting and plug loads to shut them off when occupancy is not sensed The incentive is per room Replacement or upgrades of existing occupancy-based controls are not eligible as a prescriptive incentive

Economizer Integrated Dual Enthalpy Economizer ControlsThis measure is targeted to non-residential establishments whose HVAC equipment is not equipped with a functional economizer

Circulation Fan High-Volume Low-SpeedFans must be greater than 16 feet in diameter and have variable speed control

ECM Circulation Fan This measure is targeted to non-residential customers whose air handling equipment currently uses a SP or PSC fan motor rather than an ECM This measure applies only to circulating fan motors of 1 HP or less Above 1 HP motors are governed by NEMA standards and would see little to no efficiency benefit by adding an ECM The targeted fan can supply heating or cooling only or both heating and cooling

ECM Circulation Pump This measure is targeted for replacement of a shaded pole or permanent split capacitor pump or motor with an electronically commutated pump or motor le75 HP

Retrocomissioning Cooling Systems Confined to chiller plant andor isolated packaged units For reservation must contain proposal with defined scope at equipment level that demonstrates energy savings For final approval required final commissioning report including raw data (TAB reports) demonstrating actual scope

This prescriptive measure can be used for facilities with maximum cooling demand less than 1687 tons Larger systems require the use of custom HVAC measure

Retrocomissioning Whole Building Covers all relevant major mechanical systems such as chiller plant air side systems compressed air andor process systems For reservation must contain proposal with defined scope at equipment level that demonstrates energy savings For final approval required final commissioning report including raw data (TAB reports) demonstrating actual scope

This prescriptive measure can be used for facilities less than 404858 square feet Larger facilities require the use of custom HVAC measure

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 27

Energy Management System For installing a web-based building automation system in existing buildings that currently have no digital automated HVAC controls or have outdated pneumatic control systems with inoperable time control functions Existing HVAC control systems must not have time-of-day scheduling Upgrading obsolete EMS HVAC system with inoperable time clock functions will be reviewed on a case-by-case basis for incentive eligibility This incentive cannot be combined with incentives for programmable thermostats or setback-setup controls Must include the controls strategy and a scaled floor-plan with controlled areas highlighted HVAC BAS systems must be new and include bull Central time clock control bull Web-based interface with PC-based controls and graphic bull Building performance Tracking bull Open-protocol architecture controls system shall consist of either LonTalk (ANSICEA 7091) or BACNet (ASHRAE ANSI 135) protocol being used between all controlled and controlling devices and every node on the network bull Minimum setback period must exceed 2200 hours per year bull A minimum setback space temperature of at least 10degF when heating and 5degF when cooling bull Ability to adjust schedules and settings remotely over the internet bull Report generation describing energy and operating trends

This prescriptive measure can be used for facilities with maximum cooling demand less than 456 tons Larger systems require the use of custom HVAC measure

Demand Controlled Ventilation New ventilation controls must use carbon dioxide levels to measure occupancy and modify the percentage of outside air based on occupancy levels Only buildings with space heating and cooling requirements are eligible Conditioned spaces must be kept between 65ordmF and 75ordmF during occupied operating hours Carbon dioxide sensors must be installed in conjunction with fully functioning motor operated outside air dampers Dual temperature air-side economizers with zone-level CO2 sensors for rooftop units are eligible

This prescriptive measure can be used for facilities with maximum cooling demand less than 2210 tons Larger systems require the use of custom HVAC measure

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 28

Other HVAC Measures- consult project manual for eligibility specifications HVAC

Measure Incentive Unit Quantity Incentive

Measure Code er Unit

H1 8 Hotel Guest Room Occupancy Sensor Room $20

H1 9 Economizer Integrated Dual Enthalpy Economizer Controls Ton $1 5

H20 Circulation Fan High-Volume Low-Speed Unit $30

H21 ECM Circulation Fan Fan $1 5

H27 ECM Circulation Pump Pump $50

H28 Retrocommissioning Cooling Systems

Ton $750

H29 Retrocommissioning Whole Buidling

Square Foot $010

H29 Energy Management System Ton $2500

H30 Demand Controlled Ventilation Ton $2500

Other HVAC Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 29

Unitary HVAC Chillers

Air-Cooled Chillers Water Cooled Positive Displacement Reciprocating Chillers and Water Cooled Centrifugal Chillers Chiller applications including existing multiple chiller configurations (including redundant or lsquostand-byrsquo chillers) existing chillers serving multiple load groups and chillers in industrial applications are defined as non-standard applications and must follow a site-specific custom protocol $005kWh) rate

Incentives are offered for chillers with an IPLV value (expressed in kW per ton) that is less than or equal to the qualifying efficiency shown in the table below The chiller efficiency rating must be based on ARI Standard 550590-2003 for IPLV conditions The chillers must meet ARI standards 550590-2003 be UL listed and use a minimum ozone-depleting refrigerant (eg HCFC or HFC) The ARI net capacity value should be used to determine the chiller tons A manufacturerrsquos specification sheet with the rated kWton-IPLV or COP-IPLV must accompany the application along with the four point performance data that is the basis for the IPLV The application must include a certification that the chiller is appropriately sized for site design load conditions

Chillers must satisfy efficiency requirements for both full load and IPLV efficiencies for either Path A or Path B The table shows the minimum efficiency ratings to qualify for the prescriptive incentive which must be consistent with the expected operating conditions of the efficient chiller For example if the efficient chiller satisfies Path A and generally performs at part load the appropriate baseline chiller efficiency is the IPLV value under Path A If the efficient chiller satisfies Path B and generally performs at full load the appropriate baseline chiller efficiency is the full load value under Path B Generally chillers operating above 70 percent load for a majority (50 or more) of operating hours should use Path A and chillers below 70 load for the majority of operating hours should use Path B

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 30

C3 lt 75 tons

C4 75 tons and lt 150 tons

cs ~ 150 tons and lt 300 tons C6 ~ 300 tons

Water Cooled Centrifugal Chillers C7 lt 300 tons CB ~ 300 tons and lt 600 tons

C9 ~ 600 tons

Path A

Qualifying Full Load Efficiency

Qualifying IPLV Efficiency

Path B

Qualifying Full Load Efficiency

Qualifying IPLV Efficiency

0780 kWton 0567 kWton 0800 kWton 0540 kWton

0775 kWton 0554 kWton 0790 kWton 0527 kWton

0680 kWton 0522 kWton 0718 kWton 0486 kWton 0620 kWton 0486 kWton 0639 kWton 0441 kWton

0634 kWton 0536 kWton 0639 kWton 0405 kWton 0576 kWton 0494 kWton 0600 kWton 0360 kWton

0570 kWton 0494 kWton 0590 kWton 0360 kWton

I

Incentive ($ton)

$17

$17

Unitary Chiller Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 31

Refrigeration

Anti-Sweat Heater Controls Incentives are offered for devices that sense the relative humidity in the air outside of the display case and cycles or turns off the glass door (if applicable) and frame anti-sweat heaters when the ambient dew point is below a preset set point Technologies that can turn off anti-sweat heaters based on sensing condensation (on the inner glass pane) also qualify Incentive is based on the number of doors

Evaporator Fan Controls This measure is for the installation of controls in medium temperature walk-in coolers The controller reduces airflow of the evaporator fans when there is no refrigerant flow The measure must control a minimum of 120 HP where fans operate continuously at full speed The measure also must reduce fan motor power by at least 75 during the off cycle This measure is not applicable if any of the following conditions apply 1) Compressor runs all the time with high duty cycle 2) Evaporator fan does not run at full speed all the time 3) Evaporator fan motor runs on poly-phase power 4) Evaporator fan motor is not shaded-pole or permanent split capacitor (PSC) 5) Evaporator fan does not use off-cycle or time-off defrost

Floating Head Pressure Controls Controls must vary head pressure to adjust condensing temperatures in relation to outdoor air temperature Must replace existing constant pressure or manually controlled systems to achieve reduced head pressure in order to maintain a minimum saturated condensing temperature of 70 degF or a 20 degF variance below design heat pressure during mild weather conditions Compressor size must be at least 5 HP

Automatic Door Closers for Walk-In Coolers and Freezers The auto-closer should be applied to the main insulated opaque door(s) of a walk-in cooler or freezer The auto-closer must be able to firmly close that door when it is within one inch of full closure This must be a newly installed automatic door closer replacements on previously installed door closers are not eligible for an incentive

EC Motor for Walk-inReach-in Refrigerated cases or Freezer cases Incentives are offered for replacement of an existing standard-efficiency shaded-pole or permanent split capacitor evaporator fan motor in refrigerated display cases or fan coil in walk-ins The replacement unit must be an Electronically Commutated Motor (ECM) This measure cannot be used in conjunction with the Evaporator Fan Controller measure

ENERGY STAR Solid Door Freezer and Glass Door Freezer and Refrigerators Incentives are offered for replacement of existing self-contained refrigerators and freezers with units that are ENERGY STARreg listed Only units with built-in refrigeration systems are qualified Units with remote refrigeration systems or units do not qualify Customers must provide proof that the appliance meets the CEE or ENERGY STAR efficiency specifications using ASHRAE Standard 72-2005 (38degF plusmn 2degF) Incentive is per unit

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 32

Refrigeration Suction Pipe Insulation 1 Must insulate bare refrigeration suction lines of 1 58 inches in diameter or less on existing equipment only 2 Cooler lines require frac34 inch of flexible closed-cell nitrite rubber or an equivalent insulation 3 Freezer lines require 1-inch of flexible closed-cell nitrite rubber or an equivalent insulation 4 Insulation exposed to the outdoors must be protected from the weather (ie jacketed with a medium-gauge aluminum jacket)

Night Cover 1 Must install a cover on an existing open refrigerated display case to decrease its cooling load during off hours 2 The equipment manufacturer must not object to the use of night covers for the existing display case model 3 This rebate is based on the linear footage of the installed 4 The cover must be applied for a period of at least six hours

Strip Curtain on Walk-In CoolerFreezer 1 New strip curtains or plastic swinging doors must be installed on doorways of refrigerated spaces (conditioned to less than 50deg F) 2 Rebate is based on the linear footage of the doorway that the strip curtains are being installed in 3 Opening between the strip curtain and bottom of doorway must be no larger than 1 inch 4 Strips must have an overlay greater than 1 inch

Evaporator Coil Defrost Control 1The current system must include an operating electric defrost system with a functional electroshymechanical time clock 2 Evaporator coil temperature and pressure must be monitored by controller in order to determine optimal defrost cycles 3 New intelligent control systems to control the defrost systems will typically replace timed- defrost controls

Variable Speed Refrigeration Compressor This measure VSD control for refrigeration systems and its eligibility targets applies to retrofit construction in the commercial and industrial building sectors it is most applicable to grocery stores or food processing applications with refrigeration systems This protocol is for a VSD control system replacing a slide valve control system

Add Doors to Open Refrigerated Cases The eligible retrofit equipment is either no sweat doors or doors with anti-sweat heaters If a lighting retrofit is included with the new doors it must consume the same amount of energy or less energy than the old lighting Upgrades to lighting or other system components should be processed separately Horizontal cases are not eligible and should be processed as custom

Door Gaskets PECO Smart Ideas For Your Business CampI Program Application Manual

Q1 2017 pg 33

This measure is applicable to commercial refrigeration and applies to the replacement of worn-out gaskets with new better-fitting gaskets Applicable gaskets include those located on the doors of walk-in andor reach-in coolers and freezers This protocol applies to the main doors of both low temperature (ldquofreezerrdquo ndash below 32 degF) and medium temperature (ldquocoolerrdquo ndash above 32 degF) walk-ins

Zero Energy Doors For this measure a no-heatlow-heat clear glass door must be installed on an upright display case It is limited to door heights of 57 inches or more Doors must have either heat reflective treated glass be gas filled or both This measure applies to low temperature cases onlymdashthose with a case temperature below 0degF Doors must have 3 or more panes Total door rail glass and frame heater amperage ( 120 volt) cannot exceed 039413 amps per door for low temperature display cases Rebate is based on the door width (not including case frame)

Air Cooled Refrigeration Condenser Approach temperature lt8F for low temperature loads lt13F for medium temperature loads

Oversized Condenser with VFD New standalone condenser must no more than 150 larger than load

Case Light Occupancy Controls Acceptable for freezer or refrigerated cases as well as open cases or cases with doors

LED Open Case Lighting For replacing open case T8 or T12 fluorescent fixtures with DLC listed LEDs on refrigerators coolers and freezers

LED Enclosed Case Lighting Refrigerated LED case lighting with or without motion sensors on enclosed refrigerated vertical displays The baseline equipment is assumed to be cases with uncontrolled T8 or T12 linear fluorescent lamps

LED Enclosed Case Lighting Freezer LED case lighting with or without motion sensors on enclosed freezer vertical displays The baseline equipment is assumed to be cases with uncontrolled T8 or T12 linear fluorescent lamps

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 34

Refrigeration Measures Ref Measure

Measure Incentive Unit IncentiveUnit Code R01 Anti-Sweat Heater Controls Door $30

R02 Evaporator Fan Controls Controller $50

R03 Floating-head Pressure Controls HP $20

R04 Automatic Door Closers fo r Walk-in Coolers Door $75

R05 Automatic Door Closers fo r Walk-in Freezers Door $75

R06 Evaporator Fan EC Motor fo r Reach- in Cases Motor $35

RO Evaporator Fan EC Motor fo r Walk-in Cases Motor $50

R08 ENERGY STARreg Glass Door Freezer lt15 Cu Ft Unit $100

R09 ENERGY STARreg Glass Door Freezer 15- 49 Cu Ft Unit $125

R10 ENERGY STARreg Glass Door Freezer ~ 50 Cu Ft Unit $145

R11 ENERGY STARreg Solid Door Freezer Unit $75

R12 ENERGY STARreg Glass Door Refrigerator lt50 Cu Ft Unit $30

R13 ENERGY STARreg Glass Door Refrigerator gt= 50 Cu Ft Unit $50

K14 t NtKGY ~ I AKreg ~Olld Uoor Ketngerator $ OU Cu t-t Unit $~0

R15 Suction Pipe Insulation Walk-in Coolers Linear Foot $050

R16 Suction Pipe Insulation Walk in Freezers Linear Foot $075

R17 Night Cover Linear Foot $800

R18 Strip Curtains on Walk-in Cooler Linear Foot $250

R19 Evaporator Coil Defrost Control Controller $7500

R20 Variable Speed Refrigeration Compressor Compressor $85

R21 Add Doors to Open Refrigerated Cases Door $55

R22 Door Gaskets Door $250

R23 Zero Energy Doors Door $50

R24 A ir Cooled Refrigeration Condenser Ton $10

R25 Oversized Condenser with VFD Ton $10

R26 Case Light Occupancy Controls Door $8

R27 LED Open Cose Lighting Cose $10

R28 LED Enclosed Case Lighting Refrigerated Door $30

R30 LED Enclosed Case Lighting Freezer Door $30

Refrigeration Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 35

Food Service Beverage and Snack Machine Controls Incentives are offered for refrigerated vending machines that contain non-perishable bottled and canned beverages Controller for both types of systems must include a passive infrared occupancy sensor to turn off fluorescent lights and other energized machine systems when the surrounding area is unoccupied for 15 minutes or longer For the refrigerated machines the control logic may include periodic power up at 2-hour intervals or longer to maintain product temperature and provide compressor protection

ENERGY STARreg Refrigerated Beverage Vending Machines Incentives are offered for ENERGY STARreg beverage vending machines Qualifying machines can be found at httpswwwenergystargovproductsothervending_machines

ENERGY STARreg Electric Steam Cooker This measure applies to the installation of electric ENERGY STAR steam cookers as either a new item or replacement for an existing unit Gas steam cookers are not eligible The steam cookers must meet minimum ENERGY STAR efficiency requirements A qualifying steam cooker must meet a minimum cooking efficiency of 50 percent and meet idle energy rates specified by pan capacity

ENERGY STARreg Electric Combination Oven This measure applies to electric ovens capable of handling single 12 x 20 x 25 pan per rack

ENERGY STARreg Commercial Convection Oven The oven must meet or exceed heavy load potato cooking energy efficiency of greater than 70 utilizing ASTM Standard F149 Applies only to electric ovens

ENERGY STARreg Commercial Fryers The commercial fryer must have a tested heavy load (French fry for large vats) cooking energy efficiency of greater than 80 utilizing American Society for Testing and Materials (ASTM) Standard F1361 for commercial fryers and ASTM Standard F2144 for large vat fryers Multiple vat configurations are paid per qualifying vat ENERGY STAR maintains a list of qualifying products and specifications at httpwwwenergystargov

ENERGY STARreg Commercial Hot Holding Cabinet Energy STAR rating electric

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 36

Food Service amp Other Measures FoodOther

Measure Incentive Unit Incentive

Measure Code Unit

F01 Beverage Machine Controls Unit $25

F02 Snack Machine Controls Unit $20

F03 ENERGY STARreg Refrigerated Beverage Vending Machir Unit $125

F04 ENERGY STARreg Commerc ial Steam Cooker Unit $200

F05 ENERGY STARreg Electric Combination Oven Unit $200

F06 ENERGY STARreg Commercial Electric Convection Oven Unit $150

F07 ENERGY STARreg Commerc ial Fryers Unit $100

F08 ENERGY STARregCommerc ial Hot Holding Cabinet Unit $200

Food Service Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 37

Motors and Variable Frequency DrivesEarly Replacement Motors For constant speed and uniformly loaded motors this measure applies to the replacement of old motors with new energy efficient motors of the same rated horsepower Old motors must be less than 15 years Replacements where the old motor and new motor have different horsepower ratings are considered custom measures Motors with variable speeds variable loading or industrial-specific applications are also considered custom measures

Motors Incentive Table Motors

Measure Code

HP Incentive per Motor

M01 15 - 10 $40 M02 11 - 50 $100 M03 51-100 $150 M04 gt100 $300

Only VFDs on unitary systems are eligible Non-unitary systems must be submitted as a custom measure Soft start motors are not eligible

Variable Frequency Drives on HVAC Fan Applications Incentives are offered for installing VFDs on existing HVAC fans that do not have pre-existing VFDs This measure applies to HVAC supply and return fans only All other fans including cooling tower fans must be submitted as custom measures Manually fixed speed settings on HVAC fans must be submitted via custom application The VFD must control motor speed automatically in response to pressure flow temperature or other variable signal The installation of a VSD must accompany the permanent removal or disabling of any throttling devices such as inlet vanes bypass dampers and throttling valves etc The incentive is offered per controlled HP

Variable Frequency Drives on Pump Applications Incentives are offered for installing VFDs on existing chilled water pumps and heating hot water pumps that do not have existing VFDs This measure applies to chilled water pumps and heating hot water pumps only All other pumps must be submitted as custom measures Manually fixed speed settings on pumps must be submitted via custom application The VFD must control motor speed automatically in response to pressure flow temperature or other variable signal The installation of a VSD must accompany the permanent removal or disabling of any throttling devices such as throttling valves The incentive is offered per controlled HP

Variable Speed Control for Kitchen Exhaust Hoods The measure consists of installing a new VSD in conjunction with a sensor control system that varies the exhaust rate of kitchen ventilation (exhaust andor makeup air fans) based on the heat and effluent output from the cooking appliances (ie the more heat and smokevapors generated the more ventilation needed) This involves installing a temperature sensor in the hood exhaust collar andor an optic sensor on the end of the hood that senses cooking conditions and allows the system to automatically vary the rate of exhaust to match requirements by adjusting the fan speed accordingly

Variable Speed Drives for Process or Other Equipment VFD must be used in conjunction with a process (non HVAC) application To qualify for this incentive the driven equipment must operate at least 2000 hours per year Redundant or back- up units do not qualify VFDs replacing existing VFDs do not qualify The VFD must control motor

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 38

speed automatically in response to pressure flow temperature or other variable signal VFDs installed as ldquosoft startrdquo without automatic manual closed loop speed control do not qualify The installation of a VFD must accompany the permanent removal or disabling of any throttling devices such as throttling valves The incentive is per controlled HP and only applies to controlled motors less than 50 HP

VSDVFD Incentives Table VFD

Measure Code

Measure Unit Incentive per Unit

Fan Application

V01 VFD on HVAC Fan HP $25 Pump Application

Variable Speed Control for Kitchen Exhaust Hoods

Variable Speed Drives for Process or Other Equipment

V02 VFD on Chilled Water Pumps HP $25 V03 VFD on Heating Hot Water Pumps HP $25

V04 Kitchen Exhaust Fan Retrofit Hood HP $500

V05 Process Motor lt 50 HP HP $50

Domestic Hot Water Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater This measure documents the energy savings attributed to converting from a standard electric water heater to an ENERGY STAR natural gaspropane-fired water heater or a standard oil-fired water heater with an Energy Factor of 0585

Heat Pump Water Heater This includes heat pump water heaters with energy factors meeting ENERGY STAR criteria The measure described here involves a direct retrofit of a resistive electric water heater with a heat pump water heater It does not cover systems where the heat pump is a pre-heater or is combined with other water heating sources More complicated installations can be treated as custom projects

Low Flow Pre-Rinse Spray Valve This measure applies to efficient low flow pre-rinse sprayers in grocery and food service applications The most likely areas of application are kitchens in restaurants and hotels Only premises with electric water heating may qualify for this incentive In addition the replacement pre-rinse spray nozzle must use less than 16 gallons per minute with a cleanability performance of 26 seconds per plate or less Low flow pre-rinse sprayers reduce hot water usage and save energy associated with water heating

Domestic Hot Water Incentive Table

Measure Code Measure Unit Retrofit Incentive per

Unit

W01 Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater Unit $100

W02 Heat Pump Water Heater Unit $100 W03 Low-Flow Pre-Rinse Spray Valve Valve $17

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 39

Compressed Air SystemsNo-loss Condensate Drain No-loss Condensate Drains are controlled by a sensor that monitors the level of condensate and only open when there is a need to drain condensate They close before compressed air is allowed to escape This measure is targeted to non-residential customers whose equipment is a timed drain that operates on a pre-set schedule Acceptable baseline conditions are compressed air systems with standard condensate drains operated by a solenoid and timer

Air-Entraining air nozzle This measure is targeted to non-residential customers whose compressed air equipment uses stationary air nozzles in a production application with an open copper tube of 18rdquo or 14rdquo orifice diameter Energy efficient conditions require replacement of an inefficient non-air entraining air nozzle with an energy efficient air-entraining air nozzle that use less than 15 CFM at 100 psi for industrial applications

Storage Tanks for LoadNo Load Screw Compressors This measure protocol applies to the installation of air receivers with pressureflow controls to loadno load compressors Loadno load compressors unload when there is low demand The process of unloading is done over a period of time to avoid foaming of the lubrication oil Using a storage tank with pressureflow control will buffer the air demands on the compressor Reducing the number of cycles in turn reduces the number of transition times from load to no load and saves energy The baseline equipment is a loadno load compressor with a 1 galcfm storage ratio or a modulating compressor with blowdown The high efficiency equipment is a loadno load compressor with a minimum storage ratio of 4 gallons of storage per cfm

Cycling Refrigerated Thermal Mass Dryer When air is compressed water vapor in the air condenses and collects in liquid form Some of this condensate collects in the air distribution system and can contaminate downstream components such as air tools with rust oil and pipe debris Refrigerated air dryers remove the water vapor by cooling the air to its dew point and separating the condensate Changes in production and seasonal variations in ambient air temperature lead to partial loading conditions on the dryer Standard air dryers use a hot gas bypass system that is inefficient at partial loads A Cycling Thermal Mass Dryer uses a thermal storage medium to store cooling capacity when the system is operated at partial loads allowing the dryer refrigerant compressor to cycle

This measure is targeted to non-residential customers whose equipment is a non-cycling refrigerated air dryer with a capacity of 600 cfm or below Acceptable baseline conditions are a non-cycling (eg continuous) air dryer with a capacity of 600 cfm or below The replacement of desiccant deliquescent heat-of-compression membrane or other types of dryers does not qualify under this measure

Variable Speed Air Compressor This type of compressor uses a special drive to control the speed (RPM) of the unit which in turn saves energy compared to a fixed speed equivalent

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 40

No-loss Condensate Drain Air-Entraining Air Nozzle Cycling Refrigerated Thermal Mass Dryer

Compressor Incentive per

Equipment Type Units Quantity Daily Operating Unit

Hours

CA04 Storage Tanks for LoadNo Load Screw

Compressor HP $10 Compressors

CA05 Variable Speed Air Compressor

Compressor HP $30

CA06 Compressed Air System Optimization

Compressor HP $50

Compressed Air System Optimization The submitted optimization measures must be identified in an Air System Audit or equivalent study to be eligible The measures must demonstrate energy savings as evaluated by a Program Engineer Additionally measures must also fall under one or more of the category below to be eligible

1) Install storage Receivers (new receivers only replacing existing storage receivers are ineligible)

2) Compressor control (must demonstrate improvement in partial load efficiency of the compress air system including reduceeliminate partially loaded units)

3) Dryer control 4) Source pressure reduction 5) Right-sizing distribution components such as piping filters regulators

connectors and hoses (routine maintenance replacements are ineligible) 6) Leakage detection and repair 7) Eliminate low-efficiency end-usages of compressed air 8) Heat recovery (most reduce electricity consumption of the replaced heat source)

Compressed Air Systems Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 41

lt65000 Btuh

~ 65000 Btuh and lt135000 Btuh

135000 Btuhand lt240000 Btuh

240000 Btuh and lt760000 Btuh

760000 Btuh

154

142

135

125

123

Chiller Capacity Path APath B efficiency (kWton )

lt 150 tons

~150 tons and lt300 tons

300 tons and lt400 tons

400 tons and lt600 tons

600 tons

lt75 tons

~75 tons and lt150 tons

~150 tons and lt300 tons

~300 tons and lt600 tons

600 tons

0610 FU0695 FL and 0550 IPLV0440 IPLV

0610 FU0635 FL and 0550 IPLV0400 IPLV

0560 FU0595 FL and 0520 IPLV0390 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

Path APath B efficiency (kWton )

0750 FU0780 FL and 0600 IPLV0500 IPLV

0720 FU0750 FL and 0560 IPLV0490 IPLV

0660 FU0680 FL and 0540 IPLV0440 IPLV

0610 FU0625 FL and 0520 IPLV0410 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

Data Centers Data Center incentives are available for facilities ranging in size from office server closets to large standalone facilities

Air Cooled Chiller Path APath B EER (BtuWh) lt150 tons 101 FL97 FL and 137 IPLV158 IPLV ge150 tons 101 FL97 FL and 140 IPLV161 IPLV

Air Cooled Chiller without Condenser Air-cooled chillers without condenser must be rated with matching condensers and comply with air-cooled chiller efficiency requirements

Computer Room Air Conditioner

Computer Room Air Handler Variable Speed Replacing constant speed CRAH with VSD CRAH

Water Cooled Centrifugal Chiller

Water Cooled Positive Displacement or Reciprocating Chiller

Uninterruptible Power Supply Must be Energy Star Certified UPS or have full load efficiency rating

ge948 for 20-100 kVA ge978for ge100 kVA

Mainframe Refresh The rated efficiency of the replacement Mainframes power supply must be at least 8 more

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 42

- Equipment Type Units IncentiveUnit

D1 Air Cooled Chiller Ton $4000 D2 Air Cooled Chiller W ithout Condenser Ton $2000 D3 Computer Room Air Conditioner Ton $3000 D4 Computer Room Air Handler Variable Speed Ton $1000 D5 Water Cooled Centrifugal Chiller Ton $3000 D6 Water Cooled Positive Displacement or Reciprocatin $3000 D7 Uninterruptible Power Supply 20-100 kVA $1000 D8 Uninterruptible Power Supply gt 100 kVA $1000 D9 Mainframe Refresh $2000

D10 Server Refresh $2000 D11 PC Power Managment System $600 D12 HVAC System Optimization $005 D1 3 HoUCold Aisle Containment kWh saved $005 D14 Server Virtualization kW reduction $40000 D1 5 Thin Clients Units $500

efficient compared to the existing Mainframes power supply The replacement Mainframe if Inactive must be decommissioned and removed from the Data Center

Server Refresh Replacement servers must be ENERGY STARreg certified Replacement servers power supply must be 5 more efficiency compared to the power supply of the replaced servers The replaced server must be decommissioned and removed from the data center

HVAC System Optimization Final system must have these features

-Implementation of free cooling by the addition of an economizer system -Conversion of constant speed CRACCRAH into variable speed operations using VFDs and additional control functionalities and -Elevation of exhaust air temperature

HotCold Aisle Containment Includes both Hot and Cold Aisles Installing new containment measures not replacing already existed aisle containment Plenum-only installations not eligible Must result in higher difference between the return air (hot aisle) and supply air (cold aisle) temperatures measured at rack intake and exhaust locations

Server Virtualization Minimum of consolidating 5 Servers virtualized into one Server The virtualized servers if inactive are removed from the Data Center

Thin Clients Must be ENERGY STAR certified thin clients Decommissioned clients are removed from the Data Center

Data Center Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 43

Whole Building Systems Whole Building Systems Approach

The Whole Building Systems approach is intended to encourage integrated energy efficient designs by providing enhanced incentives to the customer who addresses overall energy performance Owners of eligible and qualifying new construction and major renovation projects can receive Whole Building Systems incentives when energy modeling indicates the projectrsquos performance is over 10 better than the ASHRAE 901-2007 Savings from eligible electric end-uses in kilowatt hours define the amount of financial incentive Energy savings achieved through renewable energy sources are not counted toward project energy savings and are not included in the savings basis Incentive reservations obtained during the design phase of a project will be honored for up to 24 months

How to Apply for Whole Building Systems Incentives Before construction begins bull A Pre-notification Application must be submitted documenting the Owners intention to

seek Whole Building Systems incentives bull The Owner must confirm the goals and energy efficiency strategies being pursued by the

design team on the completed Pre-notification Worksheet (Checklist tab) and in the project Summary (Whole Building Performance Summary tab)

bull Submit executable building modeling software files bull Submit the Whole Building Performance Summary worksheet energy simulation model

inputs and outputs and supporting documentation bull Receive confirmation and eligibility notification from the PECO Smart Ideas team and

receive an incentive reservation bull The final incentive paid may differ from the reserved incentive amount The final

incentive will be calculated based on site-verified equipment installation and performance The Owners final application and complete documentation must be received within 6 months of equipment installation or certificate of occupancy whichever is later

bull An executable energy model and model output demonstrating compliance with the criteria of ASHRAE 901-2007 Appendix G will be required and the equipment data sheets LED lighting fixtures must be on the DLC or Energy STAR qualified products list (QPL) to be eligible LED fixtures not on the DLC or Energy STAR QPL has the option of submitting LM79 and LM80 test reports for evaluation against DLC and Energy STAR eligibility criteria

During the construction period bull Owner and design team continue to work closely with their chosen contractor to assure

energy efficiency measures are included and installed in the completed building

When the building is constructed and operational bull Complete the Owner final application Request an equipment verification site visit by the

PECO Smart Ideas team Equipment must be installed and fully operational o Program staff will schedule a site visit and utilize submitted documentation and

measurement tools to verify that the installation follows the submitted energy simulation model

bull When PECO confirms that there are no significant changes to the installed equipment payment of the reserved incentive will be made to the Owner within 6 weeks

bull If changes from the proposed design energy simulation are found the Owner and design team will be notified of the reduced incentive amount a period of 20 calendar days will

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 44

Improvement Incentive per Sq Ft

over Code

~11 to lt20 $0155

~20 to lt30 $0233

~30 to lt40 $0350

~40 to lt60 $0525

~60 $0700

be allowed for supplemental information to be provided if no additional information is received by PECO Smart Ideas team the reduced incentive payments will be made and sent to the Owner if additional clarification and information is available program staff will work diligently to resolve the discrepancies and arrive at a reasonable incentive adjustment with the customer

Payments made by PECO Smart Ideas are final

Customer Eligibility The Owner of the proposed new building project must be a customer of PECO and receive delivery of electric service from PECO to receive kilowatt-hour based incentives Please note that electricity supply can be provided by any vendor

Project Eligibility bull The project must be a new construction or major renovation Major renovations involving

the removal and redesign of at least two building systems (such as interior lighting and mechanical systems) may apply for Whole Building Systems incentives

bull To qualify for incentives projects must demonstrate energy efficiency enhancements that achieve at least 11 improvement in the proposed design versus the standard baseline

bull The Owner must submit a Pre-approval Application to the program at the stage where changes for increased energy efficiency are still feasible and construction has not been completed

bull Projects receiving Whole Building Systems incentives are not eligible to receive other incentives such as the prescriptive or custom program incentives for the same scope

bull Project components that are NOT eligible for consideration as a basis for PECO Smart Ideas include the following o Alternative fuel sources (eg use of gas or oil equipment in lieu of electric) Please note

that combined heat and power (CHP) systems will be incentivized for the electricity they produce

o Renewable energy sources (eg solar wind biomass) bull Ineligible savings include exterior lighting process receptacle miscellaneous loads and

other unregulated end-uses Custom incentives are available for new construction exterior lighting

Whole Building Systems Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 45

Custom Project Specifications Instructions for Energy Savings Calculations for Custom Projects Custom projects must involve measures that result in a reduction in electric energy use (kWh) Electricity savings may result from either efficiency improvements or fuel switching Custom Incentives are based on the first year kilowatt-hour savings Custom applications must be accompanied by detailed engineering calculations that document the annual total energy savings

The following serve as guidelines for the minimum required documentation

Equipment Information Submittals bull A list of the present and proposed equipment and components to be installed

including manufacturerrsquos catalogmodel number bull Manufacturerrsquos specification sheets showing capacities and performance for all major

components

Energy Savings Calculations Provide calculations documenting the predicted energy consumption of the existing (or baseline) and proposed system using appropriate analytical tools and clearly stated assumptions Calculations may be performed by ldquohandrdquo but spreadsheet analysis or more rigorous modeling is preferred All analysis should be provided in electronic format All assumptions such as operating hours existing and proposed equipment operational details must be presented Engineering algorithms and procedures from recognized technical organizations such as ASHRAE SMACNA ANSI etc must be used Use rated performance factors tested under accepted procedures specified by recognized rating agencies such as AHRI ANSI ASTM etc Provide an explanation when equipment performance rating conditions vary from standard conditions

In support of the calculations extensive documentation must be provided that provides the basis for the savings estimates The documentation must provide information on the equipment operating schedule daily and seasonal load profile and baseline AND energy efficient equipment performance at the operating loads Typical documentation for custom projects often includes bull Engineering or architectural drawings and ldquoequipment schedulerdquo sheets bull Component specification sheets that include part load efficiency or performance

factors bull Spreadsheet calculations or inputoutput files and results from system modeling or

other engineering analysis using accepted engineering algorithms and practices bull Log sheets trend logs from a building management system or other operating

documentation that are often necessary to document operating hours and equipment loading and used as a basis for the calculations (in some cases short term monitoring may be required to document the load profile)

bull Control sequence of operations that are necessary where controls play a part in the savings equation

Additional documentation other than that described in the application may be required for program participation Larger projects may also require pre- and post-project sub metering or monitoring of loads andor power input as part of another measurement and verification activity to demonstrate the actual energy savings that are realized

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 46

Baseline for Custom Analysis Where equipment is replaced prior to the end of its rated service life in order to achieve energy savings the existing equipment performance may be used as the baseline in the energy savings calculations Where equipment is replaced due to failure or for other reasons (such as obsolescence or a need for more capacity) the baseline performance used in the savings calculation should be either the minimum performance that would be required by code for that equipment type and application (where a code applies) or the performance of the equipment that would have been selected as the customers standard practice when a code does not apply

Baseline or Existing System Summary On custom worksheet on application form include make model number name plate information (such as operating voltage and rated full load amps) rated capacity quantities equipment condition and age facility operating hours equipment operating schedule and load curves If needed attach separate sheets

All decisions regarding incentives for custom projects are in the sole discretion of PECO

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 47

APPENDIX PROGRAM UPDATES SUMMARY (Q1 2017) Multifamily Nursing Home and Assisted Living retrofit customers need to apply for incentives through the PECO Smart Ideas Multi-Family Program administered by Franklin Energy For more information please contact Taylor Adler at tadlerfranklinenergycom or call 1-844-4BIZ-SAVE Multifamily Nursing Home and Assisted Living new construction customers can proceed with applying for incentives here

Revised Incentives

Data Centers

Measure Incentive Effective Immediately Previous Incentive

Air-cooled chiller for data centers $40ton $10ton Air-cooled chiller without condenser for data centers $20ton $10ton

Computer room air conditioner $30ton $7ton Water-cooled centrifugal chiller for data centers $30ton $5ton Water-cooled positive displacement or reciprocating chiller for data centers

$30ton $5ton

Uninterruptible power supply 20-100 kVA $10kVA $6kVA Uninterruptible power supply gt100 kVA $10kVA $1kVA Mainframe refresh $20kW installed $5kW installed Server refresh $20kW installed $4kW installed Server virtualization $400kW reduction $4kW reduction Thin clients $5units $4units

Lighting (Effective Immediately)

Measure Incentive Effective Immediately Specification Previous

Incentive Specification

New construction exterior LED outdoor flood light LED parking garage and canopy lighting LED polearm mounted parking and roadway lighting LED wall mount fixture

$005kWh (custom)

Lighting Power Density (LPD) Requirements Unchanged

$10-54 fixture

Lighting Power Density (LPD) (Wft2) by Space Type or Building Area

LED Replacement Lamps (Tubes) 2

$250lamp 5 Min Watts Reduced

$250lamp 6 Min Watts Reduced

LED Replacement Lamps (Tubes) 4

$400lamp 10 Min Watts Reduced

$400lamp 12 Min Watts Reduced

Permanent Fixture Removal $010Watt removed

Clarification of calculation to represent actual Wattage removed

$010Watt removed

Lighting (Effective 6117)

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 48

Measure Incentive Effective 6117 Specification Previous

Incentive Previous Specification

Interior LED high-bay fixtures andor retrofit kits if lt 20000 LED Lumens

$50fixture 150 Min Watts Reduced

$75fixture 150 Min Watts Reduced

Interior LED high-bay fixtures andor retrofit kits if gt 20000 LED Lumens

$75fixture 225 Min Watts Reduced

$75fixture 150 Min Watts Reduced

New Incentives

Compressed Air

Measure New Incentive Effective Immediately Variable speed air compressor $30compressor HP Compressed air system optimization $50compressor HP

HVAC

Measure New Incentive Effective Immediately ECM circulation pump $50pump Retro-commissioning cooling systems $750ton Retro-commissioning whole building $010square foot Energy management system $25ton Demand controlled ventilation $25ton Water-cooled air conditioner $22ton

Food Service

Measure New Incentive Effective Immediately Combination oven $200unit ENERGY STARreg commercial convection oven $150unit ENERGY STARreg commercial fryers $100unit ENERGY STARreg commercial hot holding cabinet $200unit

Refrigeration

Measure New Incentive Effective Immediately Air-cooled refrigeration condenser $10ton Oversized condenser with VFD $10ton Case light occupancy controls $750door

Lighting

Measure New Incentive Effective Immediately Interior central lighting controls $00175sq foot

Motors and Drives

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 49

-

Measure New Incentive Effective Immediately VFD for dust collection system motor $50HP

Application Clarifications and Revised Requirements

Clarification of LED Eligibility for New Construction or Retrofit Projects

LED Eligibility is determined by whether lighting products are listed in either the DesignLights Consortium (DLC) Qualified Products List of commercial-grade LED luminaires or the US Environmental Protection Agency database of ENERGY STAR certified products For products not yet listed contractors may submit LM79 and LM80 test reports PECO Smart Ideas engineers will review test reports to determine if the product in question meets performance specifications

Revised W 9 Requirement

W-9 forms EIN numbers are no longer required

Deletion of erroneous statement in New Construction Lighting

The following statement from previous Business Manual has been deleted ldquoThe minimum lighting power density used to calculate the incentive shall be no lower than 50 of the ASHRAE 901-2007 valuerdquo

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 50

  • Commercial amp Industrial Program Application Manual
    • Follow This Easy Process
      • Pre-Approval Application Checklist
      • Final Application Checklist
          • Terms and Conditions
            • Program Effective Dates
            • Program and Project Eligibility
            • Incentive Payment Limits
            • Application Review Process
            • Inspections andor PUCrsquos Statewide Program Evaluation
            • Requirements for Custom Project Electricity Savings Calculation
            • Tax Liability
            • No Endorsement
            • Warranties
            • Limitation of Liability
            • Assignment
            • Customerrsquos Certification
            • Termination
            • Acknowledgement
              • Retrofit Lighting Solutions
                • General Linear Fluorescent Lamp and Ballast Specification Requirements
                • LED Lamps and Fixtures
                • Minimum Watts Reduced
                • Linear LED (Tubes)
                • Permanent Fixture Removal
                  • LED Traffic Signals
                    • LED Traffic Signals Incentive Table
                      • New Construction Lighting Specifications
                        • New Construction Lighting Incentives Table
                          • New Construction Lighting Power Density Code
                              • Exterior New Construction Lighting
                              • HVAC Equipment
                                • Air-Source Air Conditioners and Air-Source Heat Pumps
                                • Package Terminal Systems (Replacements)
                                • Ductless Mini-Split Heat Pump lt54 Tons
                                • Geothermal Heat Pump
                                  • Other HVAC Equipment
                                    • Hotel Guest Room Occupancy Sensor
                                    • ECM Circulation Fan
                                    • ECM Circulation Pump
                                    • Retrocomissioning Cooling Systems
                                    • Retrocomissioning Whole Building
                                    • Energy Management System
                                    • Demand Controlled Ventilation
                                    • Other HVAC Incentives Table
                                      • Unitary HVAC Chillers
                                        • Air-Cooled Chillers Water Cooled Positive Displacement Reciprocating Chillers and Water Cooled Centrifugal Chillers
                                          • Refrigeration
                                            • Anti-Sweat Heater Controls
                                            • Evaporator Fan Controls
                                            • Floating Head Pressure Controls
                                            • Automatic Door Closers for Walk-In Coolers and Freezers
                                            • EC Motor for Walk-inReach-in Refrigerated cases or Freezer cases
                                            • ENERGY STAR Solid Door Freezer and Glass Door Freezer and Refrigerators
                                            • Refrigeration Suction Pipe Insulation
                                            • Night Cover
                                            • Strip Curtain on Walk-In CoolerFreezer
                                            • Evaporator Coil Defrost Control
                                            • Variable Speed Refrigeration Compressor
                                            • Add Doors to Open Refrigerated Cases
                                            • Door Gaskets
                                            • Zero Energy Doors
                                            • Air Cooled Refrigeration Condenser
                                            • Oversized Condenser with VFD
                                            • Case Light Occupancy Controls
                                            • LED Open Case Lighting
                                            • LED Enclosed Case Lighting Refrigerated
                                            • LED Enclosed Case Lighting Freezer
                                              • Food Service
                                                • Beverage and Snack Machine Controls
                                                • ENERGY STARreg Refrigerated Beverage Vending Machines
                                                • ENERGY STARreg Electric Steam Cooker
                                                • ENERGY STARreg Electric Combination Oven
                                                • ENERGY STARreg Commercial Convection Oven
                                                • ENERGY STARreg Commercial Fryers
                                                • ENERGY STARreg Commercial Hot Holding Cabinet
                                                  • Motors and Variable Frequency Drives
                                                    • Early Replacement Motors
                                                    • Variable Frequency Drives on HVAC Fan Applications
                                                    • Variable Frequency Drives on Pump Applications
                                                    • Variable Speed Control for Kitchen Exhaust Hoods
                                                    • Variable Speed Drives for Process or Other Equipment
                                                      • Domestic Hot Water
                                                        • Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater
                                                        • Heat Pump Water Heater
                                                        • Low Flow Pre-Rinse Spray Valve
                                                        • Domestic Hot Water Incentive Table
                                                          • Compressed Air Systems
                                                            • No-loss Condensate Drain
                                                            • Air-Entraining air nozzle
                                                            • Storage Tanks for LoadNo Load Screw Compressors
                                                            • Cycling Refrigerated Thermal Mass Dryer
                                                            • Variable Speed Air Compressor
                                                            • Compressed Air System Optimization
                                                            • Compressed Air Systems Incentive Table
                                                              • Data Centers
                                                                • Air Cooled Chiller
                                                                • Air Cooled Chiller without Condenser
                                                                • Computer Room Air Conditioner
                                                                • Computer Room Air Handler Variable Speed
                                                                  • Replacing constant speed CRAH with VSD CRAH
                                                                    • Water Cooled Centrifugal Chiller
                                                                    • Water Cooled Positive Displacement or Reciprocating Chiller
                                                                    • Uninterruptible Power Supply
                                                                    • Mainframe Refresh
                                                                    • Server Refresh
                                                                      • Whole Building Systems
                                                                        • Whole Building Systems Approach
                                                                        • How to Apply for Whole Building Systems Incentives
                                                                        • Customer Eligibility
                                                                        • Project Eligibility
                                                                        • Whole Building Systems Incentives Table
                                                                          • Custom Project Specifications
                                                                            • Instructions for Energy Savings Calculations for Custom Projects
                                                                            • Equipment Information Submittals
                                                                            • Energy Savings Calculations
                                                                            • Baseline for Custom Analysis
                                                                            • Baseline or Existing System Summary

HVAC Heating Qualifying Incentive

Equipment Type and Cooling Capacity Cooling Qualifying Efficiency ($ per cooling Measure Code Efficiency

ton)

Air Cooled Air Conditioner

H01 lt 54 tons (lt 65000 Btuhr) 15 SEER NA $22

H02 lt 54 and lt 11 25 tons

125 IEER $22 (lt 65 000 Btuh and lt 135 000 Btuhr) NA

H03 lt11 25 and lt 20 tons

123 IEER NA $22 (lt 135000 Btuh and lt 240000 Btuhr)

H04 lt 20 and lt 6333 tons (~

11 1 IEER NA $22 240000 Btuh and lt 760000 Btuhr)

HOS ~ 6333 Ions (~ 760000 Btuhr) 103 IEER NA $22

Air Cooled Heat Pumps

H06 lt 54 tons (lt 65000 Btuhr) 143 SEER 87 HSPF $30

H07 lt 54 and lt 11 25 tons

123 IEER 3 3 COP $30 (lt 65000 Btuh and lt 135000 Btuhr)

HOS lt11 25 and lt 20 tons

1U IEER 3 2 COP $30 (lt 135000 Btuh and lt 240000 Btuhr)

H09 lt 2000 tons (240000 Btuhr) 105 IEER 3 2 COP $30

Packaged Terminal Systems (PTAC and PTHP) (PTHP only)

H10 lt 8000 Btuhr (lt066 tons) 11 8 EER 33 $17

H11 ~8000 and lt10500 Btuhr (~066 and lt 0875 tons) 11 4 EER 32 $17

H12 gt10500 Btuhr ( 875 tons) 107 EER 31 $17

H22 lt 54 tons (lt 65000 Btuhr) 121 EER 12 3 IEER NA $22

lt 54 and lt 11 25 tons 121 EER 12 3 IEER $22 H23

(lt 65000 Btuh and lt 135000 Btuhr) NA

H24 lt11 25 and lt 20 tons

120 EER 12 2 IEER $22 (lt 135000 Btuh and lt 240000 Btuhr) NA

H25 lt20 and lt 633 tons

119 EER 12 2 IEER $22 (lt 240000 Btuh and lt 760000 Btuhr) NA

H26 ~ 633 tons( lt760000 Btuhr) 110 EER 11 1 IEER NA

$22

HVAC Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 26

Other HVAC EquipmentHotel Guest Room Occupancy Sensor Incentives are offered for occupancy-based controls that control electric air conditioning air source heat pumps and or electric heating units for individual hotel rooms Systems with nonshyelectric heat are not eligible Sensors must be controlled by automatic occupancy detectors or a key-card system and the default setting for controlled units differ by at least 5 degrees (or shut the unit fan and heating or cooling off completely) from the operating set point during unshyoccupied periods The control system may also be tied into other electric loads such as lighting and plug loads to shut them off when occupancy is not sensed The incentive is per room Replacement or upgrades of existing occupancy-based controls are not eligible as a prescriptive incentive

Economizer Integrated Dual Enthalpy Economizer ControlsThis measure is targeted to non-residential establishments whose HVAC equipment is not equipped with a functional economizer

Circulation Fan High-Volume Low-SpeedFans must be greater than 16 feet in diameter and have variable speed control

ECM Circulation Fan This measure is targeted to non-residential customers whose air handling equipment currently uses a SP or PSC fan motor rather than an ECM This measure applies only to circulating fan motors of 1 HP or less Above 1 HP motors are governed by NEMA standards and would see little to no efficiency benefit by adding an ECM The targeted fan can supply heating or cooling only or both heating and cooling

ECM Circulation Pump This measure is targeted for replacement of a shaded pole or permanent split capacitor pump or motor with an electronically commutated pump or motor le75 HP

Retrocomissioning Cooling Systems Confined to chiller plant andor isolated packaged units For reservation must contain proposal with defined scope at equipment level that demonstrates energy savings For final approval required final commissioning report including raw data (TAB reports) demonstrating actual scope

This prescriptive measure can be used for facilities with maximum cooling demand less than 1687 tons Larger systems require the use of custom HVAC measure

Retrocomissioning Whole Building Covers all relevant major mechanical systems such as chiller plant air side systems compressed air andor process systems For reservation must contain proposal with defined scope at equipment level that demonstrates energy savings For final approval required final commissioning report including raw data (TAB reports) demonstrating actual scope

This prescriptive measure can be used for facilities less than 404858 square feet Larger facilities require the use of custom HVAC measure

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 27

Energy Management System For installing a web-based building automation system in existing buildings that currently have no digital automated HVAC controls or have outdated pneumatic control systems with inoperable time control functions Existing HVAC control systems must not have time-of-day scheduling Upgrading obsolete EMS HVAC system with inoperable time clock functions will be reviewed on a case-by-case basis for incentive eligibility This incentive cannot be combined with incentives for programmable thermostats or setback-setup controls Must include the controls strategy and a scaled floor-plan with controlled areas highlighted HVAC BAS systems must be new and include bull Central time clock control bull Web-based interface with PC-based controls and graphic bull Building performance Tracking bull Open-protocol architecture controls system shall consist of either LonTalk (ANSICEA 7091) or BACNet (ASHRAE ANSI 135) protocol being used between all controlled and controlling devices and every node on the network bull Minimum setback period must exceed 2200 hours per year bull A minimum setback space temperature of at least 10degF when heating and 5degF when cooling bull Ability to adjust schedules and settings remotely over the internet bull Report generation describing energy and operating trends

This prescriptive measure can be used for facilities with maximum cooling demand less than 456 tons Larger systems require the use of custom HVAC measure

Demand Controlled Ventilation New ventilation controls must use carbon dioxide levels to measure occupancy and modify the percentage of outside air based on occupancy levels Only buildings with space heating and cooling requirements are eligible Conditioned spaces must be kept between 65ordmF and 75ordmF during occupied operating hours Carbon dioxide sensors must be installed in conjunction with fully functioning motor operated outside air dampers Dual temperature air-side economizers with zone-level CO2 sensors for rooftop units are eligible

This prescriptive measure can be used for facilities with maximum cooling demand less than 2210 tons Larger systems require the use of custom HVAC measure

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 28

Other HVAC Measures- consult project manual for eligibility specifications HVAC

Measure Incentive Unit Quantity Incentive

Measure Code er Unit

H1 8 Hotel Guest Room Occupancy Sensor Room $20

H1 9 Economizer Integrated Dual Enthalpy Economizer Controls Ton $1 5

H20 Circulation Fan High-Volume Low-Speed Unit $30

H21 ECM Circulation Fan Fan $1 5

H27 ECM Circulation Pump Pump $50

H28 Retrocommissioning Cooling Systems

Ton $750

H29 Retrocommissioning Whole Buidling

Square Foot $010

H29 Energy Management System Ton $2500

H30 Demand Controlled Ventilation Ton $2500

Other HVAC Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 29

Unitary HVAC Chillers

Air-Cooled Chillers Water Cooled Positive Displacement Reciprocating Chillers and Water Cooled Centrifugal Chillers Chiller applications including existing multiple chiller configurations (including redundant or lsquostand-byrsquo chillers) existing chillers serving multiple load groups and chillers in industrial applications are defined as non-standard applications and must follow a site-specific custom protocol $005kWh) rate

Incentives are offered for chillers with an IPLV value (expressed in kW per ton) that is less than or equal to the qualifying efficiency shown in the table below The chiller efficiency rating must be based on ARI Standard 550590-2003 for IPLV conditions The chillers must meet ARI standards 550590-2003 be UL listed and use a minimum ozone-depleting refrigerant (eg HCFC or HFC) The ARI net capacity value should be used to determine the chiller tons A manufacturerrsquos specification sheet with the rated kWton-IPLV or COP-IPLV must accompany the application along with the four point performance data that is the basis for the IPLV The application must include a certification that the chiller is appropriately sized for site design load conditions

Chillers must satisfy efficiency requirements for both full load and IPLV efficiencies for either Path A or Path B The table shows the minimum efficiency ratings to qualify for the prescriptive incentive which must be consistent with the expected operating conditions of the efficient chiller For example if the efficient chiller satisfies Path A and generally performs at part load the appropriate baseline chiller efficiency is the IPLV value under Path A If the efficient chiller satisfies Path B and generally performs at full load the appropriate baseline chiller efficiency is the full load value under Path B Generally chillers operating above 70 percent load for a majority (50 or more) of operating hours should use Path A and chillers below 70 load for the majority of operating hours should use Path B

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 30

C3 lt 75 tons

C4 75 tons and lt 150 tons

cs ~ 150 tons and lt 300 tons C6 ~ 300 tons

Water Cooled Centrifugal Chillers C7 lt 300 tons CB ~ 300 tons and lt 600 tons

C9 ~ 600 tons

Path A

Qualifying Full Load Efficiency

Qualifying IPLV Efficiency

Path B

Qualifying Full Load Efficiency

Qualifying IPLV Efficiency

0780 kWton 0567 kWton 0800 kWton 0540 kWton

0775 kWton 0554 kWton 0790 kWton 0527 kWton

0680 kWton 0522 kWton 0718 kWton 0486 kWton 0620 kWton 0486 kWton 0639 kWton 0441 kWton

0634 kWton 0536 kWton 0639 kWton 0405 kWton 0576 kWton 0494 kWton 0600 kWton 0360 kWton

0570 kWton 0494 kWton 0590 kWton 0360 kWton

I

Incentive ($ton)

$17

$17

Unitary Chiller Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 31

Refrigeration

Anti-Sweat Heater Controls Incentives are offered for devices that sense the relative humidity in the air outside of the display case and cycles or turns off the glass door (if applicable) and frame anti-sweat heaters when the ambient dew point is below a preset set point Technologies that can turn off anti-sweat heaters based on sensing condensation (on the inner glass pane) also qualify Incentive is based on the number of doors

Evaporator Fan Controls This measure is for the installation of controls in medium temperature walk-in coolers The controller reduces airflow of the evaporator fans when there is no refrigerant flow The measure must control a minimum of 120 HP where fans operate continuously at full speed The measure also must reduce fan motor power by at least 75 during the off cycle This measure is not applicable if any of the following conditions apply 1) Compressor runs all the time with high duty cycle 2) Evaporator fan does not run at full speed all the time 3) Evaporator fan motor runs on poly-phase power 4) Evaporator fan motor is not shaded-pole or permanent split capacitor (PSC) 5) Evaporator fan does not use off-cycle or time-off defrost

Floating Head Pressure Controls Controls must vary head pressure to adjust condensing temperatures in relation to outdoor air temperature Must replace existing constant pressure or manually controlled systems to achieve reduced head pressure in order to maintain a minimum saturated condensing temperature of 70 degF or a 20 degF variance below design heat pressure during mild weather conditions Compressor size must be at least 5 HP

Automatic Door Closers for Walk-In Coolers and Freezers The auto-closer should be applied to the main insulated opaque door(s) of a walk-in cooler or freezer The auto-closer must be able to firmly close that door when it is within one inch of full closure This must be a newly installed automatic door closer replacements on previously installed door closers are not eligible for an incentive

EC Motor for Walk-inReach-in Refrigerated cases or Freezer cases Incentives are offered for replacement of an existing standard-efficiency shaded-pole or permanent split capacitor evaporator fan motor in refrigerated display cases or fan coil in walk-ins The replacement unit must be an Electronically Commutated Motor (ECM) This measure cannot be used in conjunction with the Evaporator Fan Controller measure

ENERGY STAR Solid Door Freezer and Glass Door Freezer and Refrigerators Incentives are offered for replacement of existing self-contained refrigerators and freezers with units that are ENERGY STARreg listed Only units with built-in refrigeration systems are qualified Units with remote refrigeration systems or units do not qualify Customers must provide proof that the appliance meets the CEE or ENERGY STAR efficiency specifications using ASHRAE Standard 72-2005 (38degF plusmn 2degF) Incentive is per unit

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 32

Refrigeration Suction Pipe Insulation 1 Must insulate bare refrigeration suction lines of 1 58 inches in diameter or less on existing equipment only 2 Cooler lines require frac34 inch of flexible closed-cell nitrite rubber or an equivalent insulation 3 Freezer lines require 1-inch of flexible closed-cell nitrite rubber or an equivalent insulation 4 Insulation exposed to the outdoors must be protected from the weather (ie jacketed with a medium-gauge aluminum jacket)

Night Cover 1 Must install a cover on an existing open refrigerated display case to decrease its cooling load during off hours 2 The equipment manufacturer must not object to the use of night covers for the existing display case model 3 This rebate is based on the linear footage of the installed 4 The cover must be applied for a period of at least six hours

Strip Curtain on Walk-In CoolerFreezer 1 New strip curtains or plastic swinging doors must be installed on doorways of refrigerated spaces (conditioned to less than 50deg F) 2 Rebate is based on the linear footage of the doorway that the strip curtains are being installed in 3 Opening between the strip curtain and bottom of doorway must be no larger than 1 inch 4 Strips must have an overlay greater than 1 inch

Evaporator Coil Defrost Control 1The current system must include an operating electric defrost system with a functional electroshymechanical time clock 2 Evaporator coil temperature and pressure must be monitored by controller in order to determine optimal defrost cycles 3 New intelligent control systems to control the defrost systems will typically replace timed- defrost controls

Variable Speed Refrigeration Compressor This measure VSD control for refrigeration systems and its eligibility targets applies to retrofit construction in the commercial and industrial building sectors it is most applicable to grocery stores or food processing applications with refrigeration systems This protocol is for a VSD control system replacing a slide valve control system

Add Doors to Open Refrigerated Cases The eligible retrofit equipment is either no sweat doors or doors with anti-sweat heaters If a lighting retrofit is included with the new doors it must consume the same amount of energy or less energy than the old lighting Upgrades to lighting or other system components should be processed separately Horizontal cases are not eligible and should be processed as custom

Door Gaskets PECO Smart Ideas For Your Business CampI Program Application Manual

Q1 2017 pg 33

This measure is applicable to commercial refrigeration and applies to the replacement of worn-out gaskets with new better-fitting gaskets Applicable gaskets include those located on the doors of walk-in andor reach-in coolers and freezers This protocol applies to the main doors of both low temperature (ldquofreezerrdquo ndash below 32 degF) and medium temperature (ldquocoolerrdquo ndash above 32 degF) walk-ins

Zero Energy Doors For this measure a no-heatlow-heat clear glass door must be installed on an upright display case It is limited to door heights of 57 inches or more Doors must have either heat reflective treated glass be gas filled or both This measure applies to low temperature cases onlymdashthose with a case temperature below 0degF Doors must have 3 or more panes Total door rail glass and frame heater amperage ( 120 volt) cannot exceed 039413 amps per door for low temperature display cases Rebate is based on the door width (not including case frame)

Air Cooled Refrigeration Condenser Approach temperature lt8F for low temperature loads lt13F for medium temperature loads

Oversized Condenser with VFD New standalone condenser must no more than 150 larger than load

Case Light Occupancy Controls Acceptable for freezer or refrigerated cases as well as open cases or cases with doors

LED Open Case Lighting For replacing open case T8 or T12 fluorescent fixtures with DLC listed LEDs on refrigerators coolers and freezers

LED Enclosed Case Lighting Refrigerated LED case lighting with or without motion sensors on enclosed refrigerated vertical displays The baseline equipment is assumed to be cases with uncontrolled T8 or T12 linear fluorescent lamps

LED Enclosed Case Lighting Freezer LED case lighting with or without motion sensors on enclosed freezer vertical displays The baseline equipment is assumed to be cases with uncontrolled T8 or T12 linear fluorescent lamps

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 34

Refrigeration Measures Ref Measure

Measure Incentive Unit IncentiveUnit Code R01 Anti-Sweat Heater Controls Door $30

R02 Evaporator Fan Controls Controller $50

R03 Floating-head Pressure Controls HP $20

R04 Automatic Door Closers fo r Walk-in Coolers Door $75

R05 Automatic Door Closers fo r Walk-in Freezers Door $75

R06 Evaporator Fan EC Motor fo r Reach- in Cases Motor $35

RO Evaporator Fan EC Motor fo r Walk-in Cases Motor $50

R08 ENERGY STARreg Glass Door Freezer lt15 Cu Ft Unit $100

R09 ENERGY STARreg Glass Door Freezer 15- 49 Cu Ft Unit $125

R10 ENERGY STARreg Glass Door Freezer ~ 50 Cu Ft Unit $145

R11 ENERGY STARreg Solid Door Freezer Unit $75

R12 ENERGY STARreg Glass Door Refrigerator lt50 Cu Ft Unit $30

R13 ENERGY STARreg Glass Door Refrigerator gt= 50 Cu Ft Unit $50

K14 t NtKGY ~ I AKreg ~Olld Uoor Ketngerator $ OU Cu t-t Unit $~0

R15 Suction Pipe Insulation Walk-in Coolers Linear Foot $050

R16 Suction Pipe Insulation Walk in Freezers Linear Foot $075

R17 Night Cover Linear Foot $800

R18 Strip Curtains on Walk-in Cooler Linear Foot $250

R19 Evaporator Coil Defrost Control Controller $7500

R20 Variable Speed Refrigeration Compressor Compressor $85

R21 Add Doors to Open Refrigerated Cases Door $55

R22 Door Gaskets Door $250

R23 Zero Energy Doors Door $50

R24 A ir Cooled Refrigeration Condenser Ton $10

R25 Oversized Condenser with VFD Ton $10

R26 Case Light Occupancy Controls Door $8

R27 LED Open Cose Lighting Cose $10

R28 LED Enclosed Case Lighting Refrigerated Door $30

R30 LED Enclosed Case Lighting Freezer Door $30

Refrigeration Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 35

Food Service Beverage and Snack Machine Controls Incentives are offered for refrigerated vending machines that contain non-perishable bottled and canned beverages Controller for both types of systems must include a passive infrared occupancy sensor to turn off fluorescent lights and other energized machine systems when the surrounding area is unoccupied for 15 minutes or longer For the refrigerated machines the control logic may include periodic power up at 2-hour intervals or longer to maintain product temperature and provide compressor protection

ENERGY STARreg Refrigerated Beverage Vending Machines Incentives are offered for ENERGY STARreg beverage vending machines Qualifying machines can be found at httpswwwenergystargovproductsothervending_machines

ENERGY STARreg Electric Steam Cooker This measure applies to the installation of electric ENERGY STAR steam cookers as either a new item or replacement for an existing unit Gas steam cookers are not eligible The steam cookers must meet minimum ENERGY STAR efficiency requirements A qualifying steam cooker must meet a minimum cooking efficiency of 50 percent and meet idle energy rates specified by pan capacity

ENERGY STARreg Electric Combination Oven This measure applies to electric ovens capable of handling single 12 x 20 x 25 pan per rack

ENERGY STARreg Commercial Convection Oven The oven must meet or exceed heavy load potato cooking energy efficiency of greater than 70 utilizing ASTM Standard F149 Applies only to electric ovens

ENERGY STARreg Commercial Fryers The commercial fryer must have a tested heavy load (French fry for large vats) cooking energy efficiency of greater than 80 utilizing American Society for Testing and Materials (ASTM) Standard F1361 for commercial fryers and ASTM Standard F2144 for large vat fryers Multiple vat configurations are paid per qualifying vat ENERGY STAR maintains a list of qualifying products and specifications at httpwwwenergystargov

ENERGY STARreg Commercial Hot Holding Cabinet Energy STAR rating electric

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 36

Food Service amp Other Measures FoodOther

Measure Incentive Unit Incentive

Measure Code Unit

F01 Beverage Machine Controls Unit $25

F02 Snack Machine Controls Unit $20

F03 ENERGY STARreg Refrigerated Beverage Vending Machir Unit $125

F04 ENERGY STARreg Commerc ial Steam Cooker Unit $200

F05 ENERGY STARreg Electric Combination Oven Unit $200

F06 ENERGY STARreg Commercial Electric Convection Oven Unit $150

F07 ENERGY STARreg Commerc ial Fryers Unit $100

F08 ENERGY STARregCommerc ial Hot Holding Cabinet Unit $200

Food Service Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 37

Motors and Variable Frequency DrivesEarly Replacement Motors For constant speed and uniformly loaded motors this measure applies to the replacement of old motors with new energy efficient motors of the same rated horsepower Old motors must be less than 15 years Replacements where the old motor and new motor have different horsepower ratings are considered custom measures Motors with variable speeds variable loading or industrial-specific applications are also considered custom measures

Motors Incentive Table Motors

Measure Code

HP Incentive per Motor

M01 15 - 10 $40 M02 11 - 50 $100 M03 51-100 $150 M04 gt100 $300

Only VFDs on unitary systems are eligible Non-unitary systems must be submitted as a custom measure Soft start motors are not eligible

Variable Frequency Drives on HVAC Fan Applications Incentives are offered for installing VFDs on existing HVAC fans that do not have pre-existing VFDs This measure applies to HVAC supply and return fans only All other fans including cooling tower fans must be submitted as custom measures Manually fixed speed settings on HVAC fans must be submitted via custom application The VFD must control motor speed automatically in response to pressure flow temperature or other variable signal The installation of a VSD must accompany the permanent removal or disabling of any throttling devices such as inlet vanes bypass dampers and throttling valves etc The incentive is offered per controlled HP

Variable Frequency Drives on Pump Applications Incentives are offered for installing VFDs on existing chilled water pumps and heating hot water pumps that do not have existing VFDs This measure applies to chilled water pumps and heating hot water pumps only All other pumps must be submitted as custom measures Manually fixed speed settings on pumps must be submitted via custom application The VFD must control motor speed automatically in response to pressure flow temperature or other variable signal The installation of a VSD must accompany the permanent removal or disabling of any throttling devices such as throttling valves The incentive is offered per controlled HP

Variable Speed Control for Kitchen Exhaust Hoods The measure consists of installing a new VSD in conjunction with a sensor control system that varies the exhaust rate of kitchen ventilation (exhaust andor makeup air fans) based on the heat and effluent output from the cooking appliances (ie the more heat and smokevapors generated the more ventilation needed) This involves installing a temperature sensor in the hood exhaust collar andor an optic sensor on the end of the hood that senses cooking conditions and allows the system to automatically vary the rate of exhaust to match requirements by adjusting the fan speed accordingly

Variable Speed Drives for Process or Other Equipment VFD must be used in conjunction with a process (non HVAC) application To qualify for this incentive the driven equipment must operate at least 2000 hours per year Redundant or back- up units do not qualify VFDs replacing existing VFDs do not qualify The VFD must control motor

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 38

speed automatically in response to pressure flow temperature or other variable signal VFDs installed as ldquosoft startrdquo without automatic manual closed loop speed control do not qualify The installation of a VFD must accompany the permanent removal or disabling of any throttling devices such as throttling valves The incentive is per controlled HP and only applies to controlled motors less than 50 HP

VSDVFD Incentives Table VFD

Measure Code

Measure Unit Incentive per Unit

Fan Application

V01 VFD on HVAC Fan HP $25 Pump Application

Variable Speed Control for Kitchen Exhaust Hoods

Variable Speed Drives for Process or Other Equipment

V02 VFD on Chilled Water Pumps HP $25 V03 VFD on Heating Hot Water Pumps HP $25

V04 Kitchen Exhaust Fan Retrofit Hood HP $500

V05 Process Motor lt 50 HP HP $50

Domestic Hot Water Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater This measure documents the energy savings attributed to converting from a standard electric water heater to an ENERGY STAR natural gaspropane-fired water heater or a standard oil-fired water heater with an Energy Factor of 0585

Heat Pump Water Heater This includes heat pump water heaters with energy factors meeting ENERGY STAR criteria The measure described here involves a direct retrofit of a resistive electric water heater with a heat pump water heater It does not cover systems where the heat pump is a pre-heater or is combined with other water heating sources More complicated installations can be treated as custom projects

Low Flow Pre-Rinse Spray Valve This measure applies to efficient low flow pre-rinse sprayers in grocery and food service applications The most likely areas of application are kitchens in restaurants and hotels Only premises with electric water heating may qualify for this incentive In addition the replacement pre-rinse spray nozzle must use less than 16 gallons per minute with a cleanability performance of 26 seconds per plate or less Low flow pre-rinse sprayers reduce hot water usage and save energy associated with water heating

Domestic Hot Water Incentive Table

Measure Code Measure Unit Retrofit Incentive per

Unit

W01 Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater Unit $100

W02 Heat Pump Water Heater Unit $100 W03 Low-Flow Pre-Rinse Spray Valve Valve $17

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 39

Compressed Air SystemsNo-loss Condensate Drain No-loss Condensate Drains are controlled by a sensor that monitors the level of condensate and only open when there is a need to drain condensate They close before compressed air is allowed to escape This measure is targeted to non-residential customers whose equipment is a timed drain that operates on a pre-set schedule Acceptable baseline conditions are compressed air systems with standard condensate drains operated by a solenoid and timer

Air-Entraining air nozzle This measure is targeted to non-residential customers whose compressed air equipment uses stationary air nozzles in a production application with an open copper tube of 18rdquo or 14rdquo orifice diameter Energy efficient conditions require replacement of an inefficient non-air entraining air nozzle with an energy efficient air-entraining air nozzle that use less than 15 CFM at 100 psi for industrial applications

Storage Tanks for LoadNo Load Screw Compressors This measure protocol applies to the installation of air receivers with pressureflow controls to loadno load compressors Loadno load compressors unload when there is low demand The process of unloading is done over a period of time to avoid foaming of the lubrication oil Using a storage tank with pressureflow control will buffer the air demands on the compressor Reducing the number of cycles in turn reduces the number of transition times from load to no load and saves energy The baseline equipment is a loadno load compressor with a 1 galcfm storage ratio or a modulating compressor with blowdown The high efficiency equipment is a loadno load compressor with a minimum storage ratio of 4 gallons of storage per cfm

Cycling Refrigerated Thermal Mass Dryer When air is compressed water vapor in the air condenses and collects in liquid form Some of this condensate collects in the air distribution system and can contaminate downstream components such as air tools with rust oil and pipe debris Refrigerated air dryers remove the water vapor by cooling the air to its dew point and separating the condensate Changes in production and seasonal variations in ambient air temperature lead to partial loading conditions on the dryer Standard air dryers use a hot gas bypass system that is inefficient at partial loads A Cycling Thermal Mass Dryer uses a thermal storage medium to store cooling capacity when the system is operated at partial loads allowing the dryer refrigerant compressor to cycle

This measure is targeted to non-residential customers whose equipment is a non-cycling refrigerated air dryer with a capacity of 600 cfm or below Acceptable baseline conditions are a non-cycling (eg continuous) air dryer with a capacity of 600 cfm or below The replacement of desiccant deliquescent heat-of-compression membrane or other types of dryers does not qualify under this measure

Variable Speed Air Compressor This type of compressor uses a special drive to control the speed (RPM) of the unit which in turn saves energy compared to a fixed speed equivalent

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 40

No-loss Condensate Drain Air-Entraining Air Nozzle Cycling Refrigerated Thermal Mass Dryer

Compressor Incentive per

Equipment Type Units Quantity Daily Operating Unit

Hours

CA04 Storage Tanks for LoadNo Load Screw

Compressor HP $10 Compressors

CA05 Variable Speed Air Compressor

Compressor HP $30

CA06 Compressed Air System Optimization

Compressor HP $50

Compressed Air System Optimization The submitted optimization measures must be identified in an Air System Audit or equivalent study to be eligible The measures must demonstrate energy savings as evaluated by a Program Engineer Additionally measures must also fall under one or more of the category below to be eligible

1) Install storage Receivers (new receivers only replacing existing storage receivers are ineligible)

2) Compressor control (must demonstrate improvement in partial load efficiency of the compress air system including reduceeliminate partially loaded units)

3) Dryer control 4) Source pressure reduction 5) Right-sizing distribution components such as piping filters regulators

connectors and hoses (routine maintenance replacements are ineligible) 6) Leakage detection and repair 7) Eliminate low-efficiency end-usages of compressed air 8) Heat recovery (most reduce electricity consumption of the replaced heat source)

Compressed Air Systems Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 41

lt65000 Btuh

~ 65000 Btuh and lt135000 Btuh

135000 Btuhand lt240000 Btuh

240000 Btuh and lt760000 Btuh

760000 Btuh

154

142

135

125

123

Chiller Capacity Path APath B efficiency (kWton )

lt 150 tons

~150 tons and lt300 tons

300 tons and lt400 tons

400 tons and lt600 tons

600 tons

lt75 tons

~75 tons and lt150 tons

~150 tons and lt300 tons

~300 tons and lt600 tons

600 tons

0610 FU0695 FL and 0550 IPLV0440 IPLV

0610 FU0635 FL and 0550 IPLV0400 IPLV

0560 FU0595 FL and 0520 IPLV0390 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

Path APath B efficiency (kWton )

0750 FU0780 FL and 0600 IPLV0500 IPLV

0720 FU0750 FL and 0560 IPLV0490 IPLV

0660 FU0680 FL and 0540 IPLV0440 IPLV

0610 FU0625 FL and 0520 IPLV0410 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

Data Centers Data Center incentives are available for facilities ranging in size from office server closets to large standalone facilities

Air Cooled Chiller Path APath B EER (BtuWh) lt150 tons 101 FL97 FL and 137 IPLV158 IPLV ge150 tons 101 FL97 FL and 140 IPLV161 IPLV

Air Cooled Chiller without Condenser Air-cooled chillers without condenser must be rated with matching condensers and comply with air-cooled chiller efficiency requirements

Computer Room Air Conditioner

Computer Room Air Handler Variable Speed Replacing constant speed CRAH with VSD CRAH

Water Cooled Centrifugal Chiller

Water Cooled Positive Displacement or Reciprocating Chiller

Uninterruptible Power Supply Must be Energy Star Certified UPS or have full load efficiency rating

ge948 for 20-100 kVA ge978for ge100 kVA

Mainframe Refresh The rated efficiency of the replacement Mainframes power supply must be at least 8 more

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 42

- Equipment Type Units IncentiveUnit

D1 Air Cooled Chiller Ton $4000 D2 Air Cooled Chiller W ithout Condenser Ton $2000 D3 Computer Room Air Conditioner Ton $3000 D4 Computer Room Air Handler Variable Speed Ton $1000 D5 Water Cooled Centrifugal Chiller Ton $3000 D6 Water Cooled Positive Displacement or Reciprocatin $3000 D7 Uninterruptible Power Supply 20-100 kVA $1000 D8 Uninterruptible Power Supply gt 100 kVA $1000 D9 Mainframe Refresh $2000

D10 Server Refresh $2000 D11 PC Power Managment System $600 D12 HVAC System Optimization $005 D1 3 HoUCold Aisle Containment kWh saved $005 D14 Server Virtualization kW reduction $40000 D1 5 Thin Clients Units $500

efficient compared to the existing Mainframes power supply The replacement Mainframe if Inactive must be decommissioned and removed from the Data Center

Server Refresh Replacement servers must be ENERGY STARreg certified Replacement servers power supply must be 5 more efficiency compared to the power supply of the replaced servers The replaced server must be decommissioned and removed from the data center

HVAC System Optimization Final system must have these features

-Implementation of free cooling by the addition of an economizer system -Conversion of constant speed CRACCRAH into variable speed operations using VFDs and additional control functionalities and -Elevation of exhaust air temperature

HotCold Aisle Containment Includes both Hot and Cold Aisles Installing new containment measures not replacing already existed aisle containment Plenum-only installations not eligible Must result in higher difference between the return air (hot aisle) and supply air (cold aisle) temperatures measured at rack intake and exhaust locations

Server Virtualization Minimum of consolidating 5 Servers virtualized into one Server The virtualized servers if inactive are removed from the Data Center

Thin Clients Must be ENERGY STAR certified thin clients Decommissioned clients are removed from the Data Center

Data Center Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 43

Whole Building Systems Whole Building Systems Approach

The Whole Building Systems approach is intended to encourage integrated energy efficient designs by providing enhanced incentives to the customer who addresses overall energy performance Owners of eligible and qualifying new construction and major renovation projects can receive Whole Building Systems incentives when energy modeling indicates the projectrsquos performance is over 10 better than the ASHRAE 901-2007 Savings from eligible electric end-uses in kilowatt hours define the amount of financial incentive Energy savings achieved through renewable energy sources are not counted toward project energy savings and are not included in the savings basis Incentive reservations obtained during the design phase of a project will be honored for up to 24 months

How to Apply for Whole Building Systems Incentives Before construction begins bull A Pre-notification Application must be submitted documenting the Owners intention to

seek Whole Building Systems incentives bull The Owner must confirm the goals and energy efficiency strategies being pursued by the

design team on the completed Pre-notification Worksheet (Checklist tab) and in the project Summary (Whole Building Performance Summary tab)

bull Submit executable building modeling software files bull Submit the Whole Building Performance Summary worksheet energy simulation model

inputs and outputs and supporting documentation bull Receive confirmation and eligibility notification from the PECO Smart Ideas team and

receive an incentive reservation bull The final incentive paid may differ from the reserved incentive amount The final

incentive will be calculated based on site-verified equipment installation and performance The Owners final application and complete documentation must be received within 6 months of equipment installation or certificate of occupancy whichever is later

bull An executable energy model and model output demonstrating compliance with the criteria of ASHRAE 901-2007 Appendix G will be required and the equipment data sheets LED lighting fixtures must be on the DLC or Energy STAR qualified products list (QPL) to be eligible LED fixtures not on the DLC or Energy STAR QPL has the option of submitting LM79 and LM80 test reports for evaluation against DLC and Energy STAR eligibility criteria

During the construction period bull Owner and design team continue to work closely with their chosen contractor to assure

energy efficiency measures are included and installed in the completed building

When the building is constructed and operational bull Complete the Owner final application Request an equipment verification site visit by the

PECO Smart Ideas team Equipment must be installed and fully operational o Program staff will schedule a site visit and utilize submitted documentation and

measurement tools to verify that the installation follows the submitted energy simulation model

bull When PECO confirms that there are no significant changes to the installed equipment payment of the reserved incentive will be made to the Owner within 6 weeks

bull If changes from the proposed design energy simulation are found the Owner and design team will be notified of the reduced incentive amount a period of 20 calendar days will

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 44

Improvement Incentive per Sq Ft

over Code

~11 to lt20 $0155

~20 to lt30 $0233

~30 to lt40 $0350

~40 to lt60 $0525

~60 $0700

be allowed for supplemental information to be provided if no additional information is received by PECO Smart Ideas team the reduced incentive payments will be made and sent to the Owner if additional clarification and information is available program staff will work diligently to resolve the discrepancies and arrive at a reasonable incentive adjustment with the customer

Payments made by PECO Smart Ideas are final

Customer Eligibility The Owner of the proposed new building project must be a customer of PECO and receive delivery of electric service from PECO to receive kilowatt-hour based incentives Please note that electricity supply can be provided by any vendor

Project Eligibility bull The project must be a new construction or major renovation Major renovations involving

the removal and redesign of at least two building systems (such as interior lighting and mechanical systems) may apply for Whole Building Systems incentives

bull To qualify for incentives projects must demonstrate energy efficiency enhancements that achieve at least 11 improvement in the proposed design versus the standard baseline

bull The Owner must submit a Pre-approval Application to the program at the stage where changes for increased energy efficiency are still feasible and construction has not been completed

bull Projects receiving Whole Building Systems incentives are not eligible to receive other incentives such as the prescriptive or custom program incentives for the same scope

bull Project components that are NOT eligible for consideration as a basis for PECO Smart Ideas include the following o Alternative fuel sources (eg use of gas or oil equipment in lieu of electric) Please note

that combined heat and power (CHP) systems will be incentivized for the electricity they produce

o Renewable energy sources (eg solar wind biomass) bull Ineligible savings include exterior lighting process receptacle miscellaneous loads and

other unregulated end-uses Custom incentives are available for new construction exterior lighting

Whole Building Systems Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 45

Custom Project Specifications Instructions for Energy Savings Calculations for Custom Projects Custom projects must involve measures that result in a reduction in electric energy use (kWh) Electricity savings may result from either efficiency improvements or fuel switching Custom Incentives are based on the first year kilowatt-hour savings Custom applications must be accompanied by detailed engineering calculations that document the annual total energy savings

The following serve as guidelines for the minimum required documentation

Equipment Information Submittals bull A list of the present and proposed equipment and components to be installed

including manufacturerrsquos catalogmodel number bull Manufacturerrsquos specification sheets showing capacities and performance for all major

components

Energy Savings Calculations Provide calculations documenting the predicted energy consumption of the existing (or baseline) and proposed system using appropriate analytical tools and clearly stated assumptions Calculations may be performed by ldquohandrdquo but spreadsheet analysis or more rigorous modeling is preferred All analysis should be provided in electronic format All assumptions such as operating hours existing and proposed equipment operational details must be presented Engineering algorithms and procedures from recognized technical organizations such as ASHRAE SMACNA ANSI etc must be used Use rated performance factors tested under accepted procedures specified by recognized rating agencies such as AHRI ANSI ASTM etc Provide an explanation when equipment performance rating conditions vary from standard conditions

In support of the calculations extensive documentation must be provided that provides the basis for the savings estimates The documentation must provide information on the equipment operating schedule daily and seasonal load profile and baseline AND energy efficient equipment performance at the operating loads Typical documentation for custom projects often includes bull Engineering or architectural drawings and ldquoequipment schedulerdquo sheets bull Component specification sheets that include part load efficiency or performance

factors bull Spreadsheet calculations or inputoutput files and results from system modeling or

other engineering analysis using accepted engineering algorithms and practices bull Log sheets trend logs from a building management system or other operating

documentation that are often necessary to document operating hours and equipment loading and used as a basis for the calculations (in some cases short term monitoring may be required to document the load profile)

bull Control sequence of operations that are necessary where controls play a part in the savings equation

Additional documentation other than that described in the application may be required for program participation Larger projects may also require pre- and post-project sub metering or monitoring of loads andor power input as part of another measurement and verification activity to demonstrate the actual energy savings that are realized

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 46

Baseline for Custom Analysis Where equipment is replaced prior to the end of its rated service life in order to achieve energy savings the existing equipment performance may be used as the baseline in the energy savings calculations Where equipment is replaced due to failure or for other reasons (such as obsolescence or a need for more capacity) the baseline performance used in the savings calculation should be either the minimum performance that would be required by code for that equipment type and application (where a code applies) or the performance of the equipment that would have been selected as the customers standard practice when a code does not apply

Baseline or Existing System Summary On custom worksheet on application form include make model number name plate information (such as operating voltage and rated full load amps) rated capacity quantities equipment condition and age facility operating hours equipment operating schedule and load curves If needed attach separate sheets

All decisions regarding incentives for custom projects are in the sole discretion of PECO

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 47

APPENDIX PROGRAM UPDATES SUMMARY (Q1 2017) Multifamily Nursing Home and Assisted Living retrofit customers need to apply for incentives through the PECO Smart Ideas Multi-Family Program administered by Franklin Energy For more information please contact Taylor Adler at tadlerfranklinenergycom or call 1-844-4BIZ-SAVE Multifamily Nursing Home and Assisted Living new construction customers can proceed with applying for incentives here

Revised Incentives

Data Centers

Measure Incentive Effective Immediately Previous Incentive

Air-cooled chiller for data centers $40ton $10ton Air-cooled chiller without condenser for data centers $20ton $10ton

Computer room air conditioner $30ton $7ton Water-cooled centrifugal chiller for data centers $30ton $5ton Water-cooled positive displacement or reciprocating chiller for data centers

$30ton $5ton

Uninterruptible power supply 20-100 kVA $10kVA $6kVA Uninterruptible power supply gt100 kVA $10kVA $1kVA Mainframe refresh $20kW installed $5kW installed Server refresh $20kW installed $4kW installed Server virtualization $400kW reduction $4kW reduction Thin clients $5units $4units

Lighting (Effective Immediately)

Measure Incentive Effective Immediately Specification Previous

Incentive Specification

New construction exterior LED outdoor flood light LED parking garage and canopy lighting LED polearm mounted parking and roadway lighting LED wall mount fixture

$005kWh (custom)

Lighting Power Density (LPD) Requirements Unchanged

$10-54 fixture

Lighting Power Density (LPD) (Wft2) by Space Type or Building Area

LED Replacement Lamps (Tubes) 2

$250lamp 5 Min Watts Reduced

$250lamp 6 Min Watts Reduced

LED Replacement Lamps (Tubes) 4

$400lamp 10 Min Watts Reduced

$400lamp 12 Min Watts Reduced

Permanent Fixture Removal $010Watt removed

Clarification of calculation to represent actual Wattage removed

$010Watt removed

Lighting (Effective 6117)

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 48

Measure Incentive Effective 6117 Specification Previous

Incentive Previous Specification

Interior LED high-bay fixtures andor retrofit kits if lt 20000 LED Lumens

$50fixture 150 Min Watts Reduced

$75fixture 150 Min Watts Reduced

Interior LED high-bay fixtures andor retrofit kits if gt 20000 LED Lumens

$75fixture 225 Min Watts Reduced

$75fixture 150 Min Watts Reduced

New Incentives

Compressed Air

Measure New Incentive Effective Immediately Variable speed air compressor $30compressor HP Compressed air system optimization $50compressor HP

HVAC

Measure New Incentive Effective Immediately ECM circulation pump $50pump Retro-commissioning cooling systems $750ton Retro-commissioning whole building $010square foot Energy management system $25ton Demand controlled ventilation $25ton Water-cooled air conditioner $22ton

Food Service

Measure New Incentive Effective Immediately Combination oven $200unit ENERGY STARreg commercial convection oven $150unit ENERGY STARreg commercial fryers $100unit ENERGY STARreg commercial hot holding cabinet $200unit

Refrigeration

Measure New Incentive Effective Immediately Air-cooled refrigeration condenser $10ton Oversized condenser with VFD $10ton Case light occupancy controls $750door

Lighting

Measure New Incentive Effective Immediately Interior central lighting controls $00175sq foot

Motors and Drives

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 49

-

Measure New Incentive Effective Immediately VFD for dust collection system motor $50HP

Application Clarifications and Revised Requirements

Clarification of LED Eligibility for New Construction or Retrofit Projects

LED Eligibility is determined by whether lighting products are listed in either the DesignLights Consortium (DLC) Qualified Products List of commercial-grade LED luminaires or the US Environmental Protection Agency database of ENERGY STAR certified products For products not yet listed contractors may submit LM79 and LM80 test reports PECO Smart Ideas engineers will review test reports to determine if the product in question meets performance specifications

Revised W 9 Requirement

W-9 forms EIN numbers are no longer required

Deletion of erroneous statement in New Construction Lighting

The following statement from previous Business Manual has been deleted ldquoThe minimum lighting power density used to calculate the incentive shall be no lower than 50 of the ASHRAE 901-2007 valuerdquo

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 50

  • Commercial amp Industrial Program Application Manual
    • Follow This Easy Process
      • Pre-Approval Application Checklist
      • Final Application Checklist
          • Terms and Conditions
            • Program Effective Dates
            • Program and Project Eligibility
            • Incentive Payment Limits
            • Application Review Process
            • Inspections andor PUCrsquos Statewide Program Evaluation
            • Requirements for Custom Project Electricity Savings Calculation
            • Tax Liability
            • No Endorsement
            • Warranties
            • Limitation of Liability
            • Assignment
            • Customerrsquos Certification
            • Termination
            • Acknowledgement
              • Retrofit Lighting Solutions
                • General Linear Fluorescent Lamp and Ballast Specification Requirements
                • LED Lamps and Fixtures
                • Minimum Watts Reduced
                • Linear LED (Tubes)
                • Permanent Fixture Removal
                  • LED Traffic Signals
                    • LED Traffic Signals Incentive Table
                      • New Construction Lighting Specifications
                        • New Construction Lighting Incentives Table
                          • New Construction Lighting Power Density Code
                              • Exterior New Construction Lighting
                              • HVAC Equipment
                                • Air-Source Air Conditioners and Air-Source Heat Pumps
                                • Package Terminal Systems (Replacements)
                                • Ductless Mini-Split Heat Pump lt54 Tons
                                • Geothermal Heat Pump
                                  • Other HVAC Equipment
                                    • Hotel Guest Room Occupancy Sensor
                                    • ECM Circulation Fan
                                    • ECM Circulation Pump
                                    • Retrocomissioning Cooling Systems
                                    • Retrocomissioning Whole Building
                                    • Energy Management System
                                    • Demand Controlled Ventilation
                                    • Other HVAC Incentives Table
                                      • Unitary HVAC Chillers
                                        • Air-Cooled Chillers Water Cooled Positive Displacement Reciprocating Chillers and Water Cooled Centrifugal Chillers
                                          • Refrigeration
                                            • Anti-Sweat Heater Controls
                                            • Evaporator Fan Controls
                                            • Floating Head Pressure Controls
                                            • Automatic Door Closers for Walk-In Coolers and Freezers
                                            • EC Motor for Walk-inReach-in Refrigerated cases or Freezer cases
                                            • ENERGY STAR Solid Door Freezer and Glass Door Freezer and Refrigerators
                                            • Refrigeration Suction Pipe Insulation
                                            • Night Cover
                                            • Strip Curtain on Walk-In CoolerFreezer
                                            • Evaporator Coil Defrost Control
                                            • Variable Speed Refrigeration Compressor
                                            • Add Doors to Open Refrigerated Cases
                                            • Door Gaskets
                                            • Zero Energy Doors
                                            • Air Cooled Refrigeration Condenser
                                            • Oversized Condenser with VFD
                                            • Case Light Occupancy Controls
                                            • LED Open Case Lighting
                                            • LED Enclosed Case Lighting Refrigerated
                                            • LED Enclosed Case Lighting Freezer
                                              • Food Service
                                                • Beverage and Snack Machine Controls
                                                • ENERGY STARreg Refrigerated Beverage Vending Machines
                                                • ENERGY STARreg Electric Steam Cooker
                                                • ENERGY STARreg Electric Combination Oven
                                                • ENERGY STARreg Commercial Convection Oven
                                                • ENERGY STARreg Commercial Fryers
                                                • ENERGY STARreg Commercial Hot Holding Cabinet
                                                  • Motors and Variable Frequency Drives
                                                    • Early Replacement Motors
                                                    • Variable Frequency Drives on HVAC Fan Applications
                                                    • Variable Frequency Drives on Pump Applications
                                                    • Variable Speed Control for Kitchen Exhaust Hoods
                                                    • Variable Speed Drives for Process or Other Equipment
                                                      • Domestic Hot Water
                                                        • Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater
                                                        • Heat Pump Water Heater
                                                        • Low Flow Pre-Rinse Spray Valve
                                                        • Domestic Hot Water Incentive Table
                                                          • Compressed Air Systems
                                                            • No-loss Condensate Drain
                                                            • Air-Entraining air nozzle
                                                            • Storage Tanks for LoadNo Load Screw Compressors
                                                            • Cycling Refrigerated Thermal Mass Dryer
                                                            • Variable Speed Air Compressor
                                                            • Compressed Air System Optimization
                                                            • Compressed Air Systems Incentive Table
                                                              • Data Centers
                                                                • Air Cooled Chiller
                                                                • Air Cooled Chiller without Condenser
                                                                • Computer Room Air Conditioner
                                                                • Computer Room Air Handler Variable Speed
                                                                  • Replacing constant speed CRAH with VSD CRAH
                                                                    • Water Cooled Centrifugal Chiller
                                                                    • Water Cooled Positive Displacement or Reciprocating Chiller
                                                                    • Uninterruptible Power Supply
                                                                    • Mainframe Refresh
                                                                    • Server Refresh
                                                                      • Whole Building Systems
                                                                        • Whole Building Systems Approach
                                                                        • How to Apply for Whole Building Systems Incentives
                                                                        • Customer Eligibility
                                                                        • Project Eligibility
                                                                        • Whole Building Systems Incentives Table
                                                                          • Custom Project Specifications
                                                                            • Instructions for Energy Savings Calculations for Custom Projects
                                                                            • Equipment Information Submittals
                                                                            • Energy Savings Calculations
                                                                            • Baseline for Custom Analysis
                                                                            • Baseline or Existing System Summary

Other HVAC EquipmentHotel Guest Room Occupancy Sensor Incentives are offered for occupancy-based controls that control electric air conditioning air source heat pumps and or electric heating units for individual hotel rooms Systems with nonshyelectric heat are not eligible Sensors must be controlled by automatic occupancy detectors or a key-card system and the default setting for controlled units differ by at least 5 degrees (or shut the unit fan and heating or cooling off completely) from the operating set point during unshyoccupied periods The control system may also be tied into other electric loads such as lighting and plug loads to shut them off when occupancy is not sensed The incentive is per room Replacement or upgrades of existing occupancy-based controls are not eligible as a prescriptive incentive

Economizer Integrated Dual Enthalpy Economizer ControlsThis measure is targeted to non-residential establishments whose HVAC equipment is not equipped with a functional economizer

Circulation Fan High-Volume Low-SpeedFans must be greater than 16 feet in diameter and have variable speed control

ECM Circulation Fan This measure is targeted to non-residential customers whose air handling equipment currently uses a SP or PSC fan motor rather than an ECM This measure applies only to circulating fan motors of 1 HP or less Above 1 HP motors are governed by NEMA standards and would see little to no efficiency benefit by adding an ECM The targeted fan can supply heating or cooling only or both heating and cooling

ECM Circulation Pump This measure is targeted for replacement of a shaded pole or permanent split capacitor pump or motor with an electronically commutated pump or motor le75 HP

Retrocomissioning Cooling Systems Confined to chiller plant andor isolated packaged units For reservation must contain proposal with defined scope at equipment level that demonstrates energy savings For final approval required final commissioning report including raw data (TAB reports) demonstrating actual scope

This prescriptive measure can be used for facilities with maximum cooling demand less than 1687 tons Larger systems require the use of custom HVAC measure

Retrocomissioning Whole Building Covers all relevant major mechanical systems such as chiller plant air side systems compressed air andor process systems For reservation must contain proposal with defined scope at equipment level that demonstrates energy savings For final approval required final commissioning report including raw data (TAB reports) demonstrating actual scope

This prescriptive measure can be used for facilities less than 404858 square feet Larger facilities require the use of custom HVAC measure

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 27

Energy Management System For installing a web-based building automation system in existing buildings that currently have no digital automated HVAC controls or have outdated pneumatic control systems with inoperable time control functions Existing HVAC control systems must not have time-of-day scheduling Upgrading obsolete EMS HVAC system with inoperable time clock functions will be reviewed on a case-by-case basis for incentive eligibility This incentive cannot be combined with incentives for programmable thermostats or setback-setup controls Must include the controls strategy and a scaled floor-plan with controlled areas highlighted HVAC BAS systems must be new and include bull Central time clock control bull Web-based interface with PC-based controls and graphic bull Building performance Tracking bull Open-protocol architecture controls system shall consist of either LonTalk (ANSICEA 7091) or BACNet (ASHRAE ANSI 135) protocol being used between all controlled and controlling devices and every node on the network bull Minimum setback period must exceed 2200 hours per year bull A minimum setback space temperature of at least 10degF when heating and 5degF when cooling bull Ability to adjust schedules and settings remotely over the internet bull Report generation describing energy and operating trends

This prescriptive measure can be used for facilities with maximum cooling demand less than 456 tons Larger systems require the use of custom HVAC measure

Demand Controlled Ventilation New ventilation controls must use carbon dioxide levels to measure occupancy and modify the percentage of outside air based on occupancy levels Only buildings with space heating and cooling requirements are eligible Conditioned spaces must be kept between 65ordmF and 75ordmF during occupied operating hours Carbon dioxide sensors must be installed in conjunction with fully functioning motor operated outside air dampers Dual temperature air-side economizers with zone-level CO2 sensors for rooftop units are eligible

This prescriptive measure can be used for facilities with maximum cooling demand less than 2210 tons Larger systems require the use of custom HVAC measure

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 28

Other HVAC Measures- consult project manual for eligibility specifications HVAC

Measure Incentive Unit Quantity Incentive

Measure Code er Unit

H1 8 Hotel Guest Room Occupancy Sensor Room $20

H1 9 Economizer Integrated Dual Enthalpy Economizer Controls Ton $1 5

H20 Circulation Fan High-Volume Low-Speed Unit $30

H21 ECM Circulation Fan Fan $1 5

H27 ECM Circulation Pump Pump $50

H28 Retrocommissioning Cooling Systems

Ton $750

H29 Retrocommissioning Whole Buidling

Square Foot $010

H29 Energy Management System Ton $2500

H30 Demand Controlled Ventilation Ton $2500

Other HVAC Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 29

Unitary HVAC Chillers

Air-Cooled Chillers Water Cooled Positive Displacement Reciprocating Chillers and Water Cooled Centrifugal Chillers Chiller applications including existing multiple chiller configurations (including redundant or lsquostand-byrsquo chillers) existing chillers serving multiple load groups and chillers in industrial applications are defined as non-standard applications and must follow a site-specific custom protocol $005kWh) rate

Incentives are offered for chillers with an IPLV value (expressed in kW per ton) that is less than or equal to the qualifying efficiency shown in the table below The chiller efficiency rating must be based on ARI Standard 550590-2003 for IPLV conditions The chillers must meet ARI standards 550590-2003 be UL listed and use a minimum ozone-depleting refrigerant (eg HCFC or HFC) The ARI net capacity value should be used to determine the chiller tons A manufacturerrsquos specification sheet with the rated kWton-IPLV or COP-IPLV must accompany the application along with the four point performance data that is the basis for the IPLV The application must include a certification that the chiller is appropriately sized for site design load conditions

Chillers must satisfy efficiency requirements for both full load and IPLV efficiencies for either Path A or Path B The table shows the minimum efficiency ratings to qualify for the prescriptive incentive which must be consistent with the expected operating conditions of the efficient chiller For example if the efficient chiller satisfies Path A and generally performs at part load the appropriate baseline chiller efficiency is the IPLV value under Path A If the efficient chiller satisfies Path B and generally performs at full load the appropriate baseline chiller efficiency is the full load value under Path B Generally chillers operating above 70 percent load for a majority (50 or more) of operating hours should use Path A and chillers below 70 load for the majority of operating hours should use Path B

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 30

C3 lt 75 tons

C4 75 tons and lt 150 tons

cs ~ 150 tons and lt 300 tons C6 ~ 300 tons

Water Cooled Centrifugal Chillers C7 lt 300 tons CB ~ 300 tons and lt 600 tons

C9 ~ 600 tons

Path A

Qualifying Full Load Efficiency

Qualifying IPLV Efficiency

Path B

Qualifying Full Load Efficiency

Qualifying IPLV Efficiency

0780 kWton 0567 kWton 0800 kWton 0540 kWton

0775 kWton 0554 kWton 0790 kWton 0527 kWton

0680 kWton 0522 kWton 0718 kWton 0486 kWton 0620 kWton 0486 kWton 0639 kWton 0441 kWton

0634 kWton 0536 kWton 0639 kWton 0405 kWton 0576 kWton 0494 kWton 0600 kWton 0360 kWton

0570 kWton 0494 kWton 0590 kWton 0360 kWton

I

Incentive ($ton)

$17

$17

Unitary Chiller Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 31

Refrigeration

Anti-Sweat Heater Controls Incentives are offered for devices that sense the relative humidity in the air outside of the display case and cycles or turns off the glass door (if applicable) and frame anti-sweat heaters when the ambient dew point is below a preset set point Technologies that can turn off anti-sweat heaters based on sensing condensation (on the inner glass pane) also qualify Incentive is based on the number of doors

Evaporator Fan Controls This measure is for the installation of controls in medium temperature walk-in coolers The controller reduces airflow of the evaporator fans when there is no refrigerant flow The measure must control a minimum of 120 HP where fans operate continuously at full speed The measure also must reduce fan motor power by at least 75 during the off cycle This measure is not applicable if any of the following conditions apply 1) Compressor runs all the time with high duty cycle 2) Evaporator fan does not run at full speed all the time 3) Evaporator fan motor runs on poly-phase power 4) Evaporator fan motor is not shaded-pole or permanent split capacitor (PSC) 5) Evaporator fan does not use off-cycle or time-off defrost

Floating Head Pressure Controls Controls must vary head pressure to adjust condensing temperatures in relation to outdoor air temperature Must replace existing constant pressure or manually controlled systems to achieve reduced head pressure in order to maintain a minimum saturated condensing temperature of 70 degF or a 20 degF variance below design heat pressure during mild weather conditions Compressor size must be at least 5 HP

Automatic Door Closers for Walk-In Coolers and Freezers The auto-closer should be applied to the main insulated opaque door(s) of a walk-in cooler or freezer The auto-closer must be able to firmly close that door when it is within one inch of full closure This must be a newly installed automatic door closer replacements on previously installed door closers are not eligible for an incentive

EC Motor for Walk-inReach-in Refrigerated cases or Freezer cases Incentives are offered for replacement of an existing standard-efficiency shaded-pole or permanent split capacitor evaporator fan motor in refrigerated display cases or fan coil in walk-ins The replacement unit must be an Electronically Commutated Motor (ECM) This measure cannot be used in conjunction with the Evaporator Fan Controller measure

ENERGY STAR Solid Door Freezer and Glass Door Freezer and Refrigerators Incentives are offered for replacement of existing self-contained refrigerators and freezers with units that are ENERGY STARreg listed Only units with built-in refrigeration systems are qualified Units with remote refrigeration systems or units do not qualify Customers must provide proof that the appliance meets the CEE or ENERGY STAR efficiency specifications using ASHRAE Standard 72-2005 (38degF plusmn 2degF) Incentive is per unit

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 32

Refrigeration Suction Pipe Insulation 1 Must insulate bare refrigeration suction lines of 1 58 inches in diameter or less on existing equipment only 2 Cooler lines require frac34 inch of flexible closed-cell nitrite rubber or an equivalent insulation 3 Freezer lines require 1-inch of flexible closed-cell nitrite rubber or an equivalent insulation 4 Insulation exposed to the outdoors must be protected from the weather (ie jacketed with a medium-gauge aluminum jacket)

Night Cover 1 Must install a cover on an existing open refrigerated display case to decrease its cooling load during off hours 2 The equipment manufacturer must not object to the use of night covers for the existing display case model 3 This rebate is based on the linear footage of the installed 4 The cover must be applied for a period of at least six hours

Strip Curtain on Walk-In CoolerFreezer 1 New strip curtains or plastic swinging doors must be installed on doorways of refrigerated spaces (conditioned to less than 50deg F) 2 Rebate is based on the linear footage of the doorway that the strip curtains are being installed in 3 Opening between the strip curtain and bottom of doorway must be no larger than 1 inch 4 Strips must have an overlay greater than 1 inch

Evaporator Coil Defrost Control 1The current system must include an operating electric defrost system with a functional electroshymechanical time clock 2 Evaporator coil temperature and pressure must be monitored by controller in order to determine optimal defrost cycles 3 New intelligent control systems to control the defrost systems will typically replace timed- defrost controls

Variable Speed Refrigeration Compressor This measure VSD control for refrigeration systems and its eligibility targets applies to retrofit construction in the commercial and industrial building sectors it is most applicable to grocery stores or food processing applications with refrigeration systems This protocol is for a VSD control system replacing a slide valve control system

Add Doors to Open Refrigerated Cases The eligible retrofit equipment is either no sweat doors or doors with anti-sweat heaters If a lighting retrofit is included with the new doors it must consume the same amount of energy or less energy than the old lighting Upgrades to lighting or other system components should be processed separately Horizontal cases are not eligible and should be processed as custom

Door Gaskets PECO Smart Ideas For Your Business CampI Program Application Manual

Q1 2017 pg 33

This measure is applicable to commercial refrigeration and applies to the replacement of worn-out gaskets with new better-fitting gaskets Applicable gaskets include those located on the doors of walk-in andor reach-in coolers and freezers This protocol applies to the main doors of both low temperature (ldquofreezerrdquo ndash below 32 degF) and medium temperature (ldquocoolerrdquo ndash above 32 degF) walk-ins

Zero Energy Doors For this measure a no-heatlow-heat clear glass door must be installed on an upright display case It is limited to door heights of 57 inches or more Doors must have either heat reflective treated glass be gas filled or both This measure applies to low temperature cases onlymdashthose with a case temperature below 0degF Doors must have 3 or more panes Total door rail glass and frame heater amperage ( 120 volt) cannot exceed 039413 amps per door for low temperature display cases Rebate is based on the door width (not including case frame)

Air Cooled Refrigeration Condenser Approach temperature lt8F for low temperature loads lt13F for medium temperature loads

Oversized Condenser with VFD New standalone condenser must no more than 150 larger than load

Case Light Occupancy Controls Acceptable for freezer or refrigerated cases as well as open cases or cases with doors

LED Open Case Lighting For replacing open case T8 or T12 fluorescent fixtures with DLC listed LEDs on refrigerators coolers and freezers

LED Enclosed Case Lighting Refrigerated LED case lighting with or without motion sensors on enclosed refrigerated vertical displays The baseline equipment is assumed to be cases with uncontrolled T8 or T12 linear fluorescent lamps

LED Enclosed Case Lighting Freezer LED case lighting with or without motion sensors on enclosed freezer vertical displays The baseline equipment is assumed to be cases with uncontrolled T8 or T12 linear fluorescent lamps

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 34

Refrigeration Measures Ref Measure

Measure Incentive Unit IncentiveUnit Code R01 Anti-Sweat Heater Controls Door $30

R02 Evaporator Fan Controls Controller $50

R03 Floating-head Pressure Controls HP $20

R04 Automatic Door Closers fo r Walk-in Coolers Door $75

R05 Automatic Door Closers fo r Walk-in Freezers Door $75

R06 Evaporator Fan EC Motor fo r Reach- in Cases Motor $35

RO Evaporator Fan EC Motor fo r Walk-in Cases Motor $50

R08 ENERGY STARreg Glass Door Freezer lt15 Cu Ft Unit $100

R09 ENERGY STARreg Glass Door Freezer 15- 49 Cu Ft Unit $125

R10 ENERGY STARreg Glass Door Freezer ~ 50 Cu Ft Unit $145

R11 ENERGY STARreg Solid Door Freezer Unit $75

R12 ENERGY STARreg Glass Door Refrigerator lt50 Cu Ft Unit $30

R13 ENERGY STARreg Glass Door Refrigerator gt= 50 Cu Ft Unit $50

K14 t NtKGY ~ I AKreg ~Olld Uoor Ketngerator $ OU Cu t-t Unit $~0

R15 Suction Pipe Insulation Walk-in Coolers Linear Foot $050

R16 Suction Pipe Insulation Walk in Freezers Linear Foot $075

R17 Night Cover Linear Foot $800

R18 Strip Curtains on Walk-in Cooler Linear Foot $250

R19 Evaporator Coil Defrost Control Controller $7500

R20 Variable Speed Refrigeration Compressor Compressor $85

R21 Add Doors to Open Refrigerated Cases Door $55

R22 Door Gaskets Door $250

R23 Zero Energy Doors Door $50

R24 A ir Cooled Refrigeration Condenser Ton $10

R25 Oversized Condenser with VFD Ton $10

R26 Case Light Occupancy Controls Door $8

R27 LED Open Cose Lighting Cose $10

R28 LED Enclosed Case Lighting Refrigerated Door $30

R30 LED Enclosed Case Lighting Freezer Door $30

Refrigeration Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 35

Food Service Beverage and Snack Machine Controls Incentives are offered for refrigerated vending machines that contain non-perishable bottled and canned beverages Controller for both types of systems must include a passive infrared occupancy sensor to turn off fluorescent lights and other energized machine systems when the surrounding area is unoccupied for 15 minutes or longer For the refrigerated machines the control logic may include periodic power up at 2-hour intervals or longer to maintain product temperature and provide compressor protection

ENERGY STARreg Refrigerated Beverage Vending Machines Incentives are offered for ENERGY STARreg beverage vending machines Qualifying machines can be found at httpswwwenergystargovproductsothervending_machines

ENERGY STARreg Electric Steam Cooker This measure applies to the installation of electric ENERGY STAR steam cookers as either a new item or replacement for an existing unit Gas steam cookers are not eligible The steam cookers must meet minimum ENERGY STAR efficiency requirements A qualifying steam cooker must meet a minimum cooking efficiency of 50 percent and meet idle energy rates specified by pan capacity

ENERGY STARreg Electric Combination Oven This measure applies to electric ovens capable of handling single 12 x 20 x 25 pan per rack

ENERGY STARreg Commercial Convection Oven The oven must meet or exceed heavy load potato cooking energy efficiency of greater than 70 utilizing ASTM Standard F149 Applies only to electric ovens

ENERGY STARreg Commercial Fryers The commercial fryer must have a tested heavy load (French fry for large vats) cooking energy efficiency of greater than 80 utilizing American Society for Testing and Materials (ASTM) Standard F1361 for commercial fryers and ASTM Standard F2144 for large vat fryers Multiple vat configurations are paid per qualifying vat ENERGY STAR maintains a list of qualifying products and specifications at httpwwwenergystargov

ENERGY STARreg Commercial Hot Holding Cabinet Energy STAR rating electric

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 36

Food Service amp Other Measures FoodOther

Measure Incentive Unit Incentive

Measure Code Unit

F01 Beverage Machine Controls Unit $25

F02 Snack Machine Controls Unit $20

F03 ENERGY STARreg Refrigerated Beverage Vending Machir Unit $125

F04 ENERGY STARreg Commerc ial Steam Cooker Unit $200

F05 ENERGY STARreg Electric Combination Oven Unit $200

F06 ENERGY STARreg Commercial Electric Convection Oven Unit $150

F07 ENERGY STARreg Commerc ial Fryers Unit $100

F08 ENERGY STARregCommerc ial Hot Holding Cabinet Unit $200

Food Service Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 37

Motors and Variable Frequency DrivesEarly Replacement Motors For constant speed and uniformly loaded motors this measure applies to the replacement of old motors with new energy efficient motors of the same rated horsepower Old motors must be less than 15 years Replacements where the old motor and new motor have different horsepower ratings are considered custom measures Motors with variable speeds variable loading or industrial-specific applications are also considered custom measures

Motors Incentive Table Motors

Measure Code

HP Incentive per Motor

M01 15 - 10 $40 M02 11 - 50 $100 M03 51-100 $150 M04 gt100 $300

Only VFDs on unitary systems are eligible Non-unitary systems must be submitted as a custom measure Soft start motors are not eligible

Variable Frequency Drives on HVAC Fan Applications Incentives are offered for installing VFDs on existing HVAC fans that do not have pre-existing VFDs This measure applies to HVAC supply and return fans only All other fans including cooling tower fans must be submitted as custom measures Manually fixed speed settings on HVAC fans must be submitted via custom application The VFD must control motor speed automatically in response to pressure flow temperature or other variable signal The installation of a VSD must accompany the permanent removal or disabling of any throttling devices such as inlet vanes bypass dampers and throttling valves etc The incentive is offered per controlled HP

Variable Frequency Drives on Pump Applications Incentives are offered for installing VFDs on existing chilled water pumps and heating hot water pumps that do not have existing VFDs This measure applies to chilled water pumps and heating hot water pumps only All other pumps must be submitted as custom measures Manually fixed speed settings on pumps must be submitted via custom application The VFD must control motor speed automatically in response to pressure flow temperature or other variable signal The installation of a VSD must accompany the permanent removal or disabling of any throttling devices such as throttling valves The incentive is offered per controlled HP

Variable Speed Control for Kitchen Exhaust Hoods The measure consists of installing a new VSD in conjunction with a sensor control system that varies the exhaust rate of kitchen ventilation (exhaust andor makeup air fans) based on the heat and effluent output from the cooking appliances (ie the more heat and smokevapors generated the more ventilation needed) This involves installing a temperature sensor in the hood exhaust collar andor an optic sensor on the end of the hood that senses cooking conditions and allows the system to automatically vary the rate of exhaust to match requirements by adjusting the fan speed accordingly

Variable Speed Drives for Process or Other Equipment VFD must be used in conjunction with a process (non HVAC) application To qualify for this incentive the driven equipment must operate at least 2000 hours per year Redundant or back- up units do not qualify VFDs replacing existing VFDs do not qualify The VFD must control motor

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 38

speed automatically in response to pressure flow temperature or other variable signal VFDs installed as ldquosoft startrdquo without automatic manual closed loop speed control do not qualify The installation of a VFD must accompany the permanent removal or disabling of any throttling devices such as throttling valves The incentive is per controlled HP and only applies to controlled motors less than 50 HP

VSDVFD Incentives Table VFD

Measure Code

Measure Unit Incentive per Unit

Fan Application

V01 VFD on HVAC Fan HP $25 Pump Application

Variable Speed Control for Kitchen Exhaust Hoods

Variable Speed Drives for Process or Other Equipment

V02 VFD on Chilled Water Pumps HP $25 V03 VFD on Heating Hot Water Pumps HP $25

V04 Kitchen Exhaust Fan Retrofit Hood HP $500

V05 Process Motor lt 50 HP HP $50

Domestic Hot Water Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater This measure documents the energy savings attributed to converting from a standard electric water heater to an ENERGY STAR natural gaspropane-fired water heater or a standard oil-fired water heater with an Energy Factor of 0585

Heat Pump Water Heater This includes heat pump water heaters with energy factors meeting ENERGY STAR criteria The measure described here involves a direct retrofit of a resistive electric water heater with a heat pump water heater It does not cover systems where the heat pump is a pre-heater or is combined with other water heating sources More complicated installations can be treated as custom projects

Low Flow Pre-Rinse Spray Valve This measure applies to efficient low flow pre-rinse sprayers in grocery and food service applications The most likely areas of application are kitchens in restaurants and hotels Only premises with electric water heating may qualify for this incentive In addition the replacement pre-rinse spray nozzle must use less than 16 gallons per minute with a cleanability performance of 26 seconds per plate or less Low flow pre-rinse sprayers reduce hot water usage and save energy associated with water heating

Domestic Hot Water Incentive Table

Measure Code Measure Unit Retrofit Incentive per

Unit

W01 Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater Unit $100

W02 Heat Pump Water Heater Unit $100 W03 Low-Flow Pre-Rinse Spray Valve Valve $17

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 39

Compressed Air SystemsNo-loss Condensate Drain No-loss Condensate Drains are controlled by a sensor that monitors the level of condensate and only open when there is a need to drain condensate They close before compressed air is allowed to escape This measure is targeted to non-residential customers whose equipment is a timed drain that operates on a pre-set schedule Acceptable baseline conditions are compressed air systems with standard condensate drains operated by a solenoid and timer

Air-Entraining air nozzle This measure is targeted to non-residential customers whose compressed air equipment uses stationary air nozzles in a production application with an open copper tube of 18rdquo or 14rdquo orifice diameter Energy efficient conditions require replacement of an inefficient non-air entraining air nozzle with an energy efficient air-entraining air nozzle that use less than 15 CFM at 100 psi for industrial applications

Storage Tanks for LoadNo Load Screw Compressors This measure protocol applies to the installation of air receivers with pressureflow controls to loadno load compressors Loadno load compressors unload when there is low demand The process of unloading is done over a period of time to avoid foaming of the lubrication oil Using a storage tank with pressureflow control will buffer the air demands on the compressor Reducing the number of cycles in turn reduces the number of transition times from load to no load and saves energy The baseline equipment is a loadno load compressor with a 1 galcfm storage ratio or a modulating compressor with blowdown The high efficiency equipment is a loadno load compressor with a minimum storage ratio of 4 gallons of storage per cfm

Cycling Refrigerated Thermal Mass Dryer When air is compressed water vapor in the air condenses and collects in liquid form Some of this condensate collects in the air distribution system and can contaminate downstream components such as air tools with rust oil and pipe debris Refrigerated air dryers remove the water vapor by cooling the air to its dew point and separating the condensate Changes in production and seasonal variations in ambient air temperature lead to partial loading conditions on the dryer Standard air dryers use a hot gas bypass system that is inefficient at partial loads A Cycling Thermal Mass Dryer uses a thermal storage medium to store cooling capacity when the system is operated at partial loads allowing the dryer refrigerant compressor to cycle

This measure is targeted to non-residential customers whose equipment is a non-cycling refrigerated air dryer with a capacity of 600 cfm or below Acceptable baseline conditions are a non-cycling (eg continuous) air dryer with a capacity of 600 cfm or below The replacement of desiccant deliquescent heat-of-compression membrane or other types of dryers does not qualify under this measure

Variable Speed Air Compressor This type of compressor uses a special drive to control the speed (RPM) of the unit which in turn saves energy compared to a fixed speed equivalent

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 40

No-loss Condensate Drain Air-Entraining Air Nozzle Cycling Refrigerated Thermal Mass Dryer

Compressor Incentive per

Equipment Type Units Quantity Daily Operating Unit

Hours

CA04 Storage Tanks for LoadNo Load Screw

Compressor HP $10 Compressors

CA05 Variable Speed Air Compressor

Compressor HP $30

CA06 Compressed Air System Optimization

Compressor HP $50

Compressed Air System Optimization The submitted optimization measures must be identified in an Air System Audit or equivalent study to be eligible The measures must demonstrate energy savings as evaluated by a Program Engineer Additionally measures must also fall under one or more of the category below to be eligible

1) Install storage Receivers (new receivers only replacing existing storage receivers are ineligible)

2) Compressor control (must demonstrate improvement in partial load efficiency of the compress air system including reduceeliminate partially loaded units)

3) Dryer control 4) Source pressure reduction 5) Right-sizing distribution components such as piping filters regulators

connectors and hoses (routine maintenance replacements are ineligible) 6) Leakage detection and repair 7) Eliminate low-efficiency end-usages of compressed air 8) Heat recovery (most reduce electricity consumption of the replaced heat source)

Compressed Air Systems Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 41

lt65000 Btuh

~ 65000 Btuh and lt135000 Btuh

135000 Btuhand lt240000 Btuh

240000 Btuh and lt760000 Btuh

760000 Btuh

154

142

135

125

123

Chiller Capacity Path APath B efficiency (kWton )

lt 150 tons

~150 tons and lt300 tons

300 tons and lt400 tons

400 tons and lt600 tons

600 tons

lt75 tons

~75 tons and lt150 tons

~150 tons and lt300 tons

~300 tons and lt600 tons

600 tons

0610 FU0695 FL and 0550 IPLV0440 IPLV

0610 FU0635 FL and 0550 IPLV0400 IPLV

0560 FU0595 FL and 0520 IPLV0390 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

Path APath B efficiency (kWton )

0750 FU0780 FL and 0600 IPLV0500 IPLV

0720 FU0750 FL and 0560 IPLV0490 IPLV

0660 FU0680 FL and 0540 IPLV0440 IPLV

0610 FU0625 FL and 0520 IPLV0410 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

Data Centers Data Center incentives are available for facilities ranging in size from office server closets to large standalone facilities

Air Cooled Chiller Path APath B EER (BtuWh) lt150 tons 101 FL97 FL and 137 IPLV158 IPLV ge150 tons 101 FL97 FL and 140 IPLV161 IPLV

Air Cooled Chiller without Condenser Air-cooled chillers without condenser must be rated with matching condensers and comply with air-cooled chiller efficiency requirements

Computer Room Air Conditioner

Computer Room Air Handler Variable Speed Replacing constant speed CRAH with VSD CRAH

Water Cooled Centrifugal Chiller

Water Cooled Positive Displacement or Reciprocating Chiller

Uninterruptible Power Supply Must be Energy Star Certified UPS or have full load efficiency rating

ge948 for 20-100 kVA ge978for ge100 kVA

Mainframe Refresh The rated efficiency of the replacement Mainframes power supply must be at least 8 more

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 42

- Equipment Type Units IncentiveUnit

D1 Air Cooled Chiller Ton $4000 D2 Air Cooled Chiller W ithout Condenser Ton $2000 D3 Computer Room Air Conditioner Ton $3000 D4 Computer Room Air Handler Variable Speed Ton $1000 D5 Water Cooled Centrifugal Chiller Ton $3000 D6 Water Cooled Positive Displacement or Reciprocatin $3000 D7 Uninterruptible Power Supply 20-100 kVA $1000 D8 Uninterruptible Power Supply gt 100 kVA $1000 D9 Mainframe Refresh $2000

D10 Server Refresh $2000 D11 PC Power Managment System $600 D12 HVAC System Optimization $005 D1 3 HoUCold Aisle Containment kWh saved $005 D14 Server Virtualization kW reduction $40000 D1 5 Thin Clients Units $500

efficient compared to the existing Mainframes power supply The replacement Mainframe if Inactive must be decommissioned and removed from the Data Center

Server Refresh Replacement servers must be ENERGY STARreg certified Replacement servers power supply must be 5 more efficiency compared to the power supply of the replaced servers The replaced server must be decommissioned and removed from the data center

HVAC System Optimization Final system must have these features

-Implementation of free cooling by the addition of an economizer system -Conversion of constant speed CRACCRAH into variable speed operations using VFDs and additional control functionalities and -Elevation of exhaust air temperature

HotCold Aisle Containment Includes both Hot and Cold Aisles Installing new containment measures not replacing already existed aisle containment Plenum-only installations not eligible Must result in higher difference between the return air (hot aisle) and supply air (cold aisle) temperatures measured at rack intake and exhaust locations

Server Virtualization Minimum of consolidating 5 Servers virtualized into one Server The virtualized servers if inactive are removed from the Data Center

Thin Clients Must be ENERGY STAR certified thin clients Decommissioned clients are removed from the Data Center

Data Center Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 43

Whole Building Systems Whole Building Systems Approach

The Whole Building Systems approach is intended to encourage integrated energy efficient designs by providing enhanced incentives to the customer who addresses overall energy performance Owners of eligible and qualifying new construction and major renovation projects can receive Whole Building Systems incentives when energy modeling indicates the projectrsquos performance is over 10 better than the ASHRAE 901-2007 Savings from eligible electric end-uses in kilowatt hours define the amount of financial incentive Energy savings achieved through renewable energy sources are not counted toward project energy savings and are not included in the savings basis Incentive reservations obtained during the design phase of a project will be honored for up to 24 months

How to Apply for Whole Building Systems Incentives Before construction begins bull A Pre-notification Application must be submitted documenting the Owners intention to

seek Whole Building Systems incentives bull The Owner must confirm the goals and energy efficiency strategies being pursued by the

design team on the completed Pre-notification Worksheet (Checklist tab) and in the project Summary (Whole Building Performance Summary tab)

bull Submit executable building modeling software files bull Submit the Whole Building Performance Summary worksheet energy simulation model

inputs and outputs and supporting documentation bull Receive confirmation and eligibility notification from the PECO Smart Ideas team and

receive an incentive reservation bull The final incentive paid may differ from the reserved incentive amount The final

incentive will be calculated based on site-verified equipment installation and performance The Owners final application and complete documentation must be received within 6 months of equipment installation or certificate of occupancy whichever is later

bull An executable energy model and model output demonstrating compliance with the criteria of ASHRAE 901-2007 Appendix G will be required and the equipment data sheets LED lighting fixtures must be on the DLC or Energy STAR qualified products list (QPL) to be eligible LED fixtures not on the DLC or Energy STAR QPL has the option of submitting LM79 and LM80 test reports for evaluation against DLC and Energy STAR eligibility criteria

During the construction period bull Owner and design team continue to work closely with their chosen contractor to assure

energy efficiency measures are included and installed in the completed building

When the building is constructed and operational bull Complete the Owner final application Request an equipment verification site visit by the

PECO Smart Ideas team Equipment must be installed and fully operational o Program staff will schedule a site visit and utilize submitted documentation and

measurement tools to verify that the installation follows the submitted energy simulation model

bull When PECO confirms that there are no significant changes to the installed equipment payment of the reserved incentive will be made to the Owner within 6 weeks

bull If changes from the proposed design energy simulation are found the Owner and design team will be notified of the reduced incentive amount a period of 20 calendar days will

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 44

Improvement Incentive per Sq Ft

over Code

~11 to lt20 $0155

~20 to lt30 $0233

~30 to lt40 $0350

~40 to lt60 $0525

~60 $0700

be allowed for supplemental information to be provided if no additional information is received by PECO Smart Ideas team the reduced incentive payments will be made and sent to the Owner if additional clarification and information is available program staff will work diligently to resolve the discrepancies and arrive at a reasonable incentive adjustment with the customer

Payments made by PECO Smart Ideas are final

Customer Eligibility The Owner of the proposed new building project must be a customer of PECO and receive delivery of electric service from PECO to receive kilowatt-hour based incentives Please note that electricity supply can be provided by any vendor

Project Eligibility bull The project must be a new construction or major renovation Major renovations involving

the removal and redesign of at least two building systems (such as interior lighting and mechanical systems) may apply for Whole Building Systems incentives

bull To qualify for incentives projects must demonstrate energy efficiency enhancements that achieve at least 11 improvement in the proposed design versus the standard baseline

bull The Owner must submit a Pre-approval Application to the program at the stage where changes for increased energy efficiency are still feasible and construction has not been completed

bull Projects receiving Whole Building Systems incentives are not eligible to receive other incentives such as the prescriptive or custom program incentives for the same scope

bull Project components that are NOT eligible for consideration as a basis for PECO Smart Ideas include the following o Alternative fuel sources (eg use of gas or oil equipment in lieu of electric) Please note

that combined heat and power (CHP) systems will be incentivized for the electricity they produce

o Renewable energy sources (eg solar wind biomass) bull Ineligible savings include exterior lighting process receptacle miscellaneous loads and

other unregulated end-uses Custom incentives are available for new construction exterior lighting

Whole Building Systems Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 45

Custom Project Specifications Instructions for Energy Savings Calculations for Custom Projects Custom projects must involve measures that result in a reduction in electric energy use (kWh) Electricity savings may result from either efficiency improvements or fuel switching Custom Incentives are based on the first year kilowatt-hour savings Custom applications must be accompanied by detailed engineering calculations that document the annual total energy savings

The following serve as guidelines for the minimum required documentation

Equipment Information Submittals bull A list of the present and proposed equipment and components to be installed

including manufacturerrsquos catalogmodel number bull Manufacturerrsquos specification sheets showing capacities and performance for all major

components

Energy Savings Calculations Provide calculations documenting the predicted energy consumption of the existing (or baseline) and proposed system using appropriate analytical tools and clearly stated assumptions Calculations may be performed by ldquohandrdquo but spreadsheet analysis or more rigorous modeling is preferred All analysis should be provided in electronic format All assumptions such as operating hours existing and proposed equipment operational details must be presented Engineering algorithms and procedures from recognized technical organizations such as ASHRAE SMACNA ANSI etc must be used Use rated performance factors tested under accepted procedures specified by recognized rating agencies such as AHRI ANSI ASTM etc Provide an explanation when equipment performance rating conditions vary from standard conditions

In support of the calculations extensive documentation must be provided that provides the basis for the savings estimates The documentation must provide information on the equipment operating schedule daily and seasonal load profile and baseline AND energy efficient equipment performance at the operating loads Typical documentation for custom projects often includes bull Engineering or architectural drawings and ldquoequipment schedulerdquo sheets bull Component specification sheets that include part load efficiency or performance

factors bull Spreadsheet calculations or inputoutput files and results from system modeling or

other engineering analysis using accepted engineering algorithms and practices bull Log sheets trend logs from a building management system or other operating

documentation that are often necessary to document operating hours and equipment loading and used as a basis for the calculations (in some cases short term monitoring may be required to document the load profile)

bull Control sequence of operations that are necessary where controls play a part in the savings equation

Additional documentation other than that described in the application may be required for program participation Larger projects may also require pre- and post-project sub metering or monitoring of loads andor power input as part of another measurement and verification activity to demonstrate the actual energy savings that are realized

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 46

Baseline for Custom Analysis Where equipment is replaced prior to the end of its rated service life in order to achieve energy savings the existing equipment performance may be used as the baseline in the energy savings calculations Where equipment is replaced due to failure or for other reasons (such as obsolescence or a need for more capacity) the baseline performance used in the savings calculation should be either the minimum performance that would be required by code for that equipment type and application (where a code applies) or the performance of the equipment that would have been selected as the customers standard practice when a code does not apply

Baseline or Existing System Summary On custom worksheet on application form include make model number name plate information (such as operating voltage and rated full load amps) rated capacity quantities equipment condition and age facility operating hours equipment operating schedule and load curves If needed attach separate sheets

All decisions regarding incentives for custom projects are in the sole discretion of PECO

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 47

APPENDIX PROGRAM UPDATES SUMMARY (Q1 2017) Multifamily Nursing Home and Assisted Living retrofit customers need to apply for incentives through the PECO Smart Ideas Multi-Family Program administered by Franklin Energy For more information please contact Taylor Adler at tadlerfranklinenergycom or call 1-844-4BIZ-SAVE Multifamily Nursing Home and Assisted Living new construction customers can proceed with applying for incentives here

Revised Incentives

Data Centers

Measure Incentive Effective Immediately Previous Incentive

Air-cooled chiller for data centers $40ton $10ton Air-cooled chiller without condenser for data centers $20ton $10ton

Computer room air conditioner $30ton $7ton Water-cooled centrifugal chiller for data centers $30ton $5ton Water-cooled positive displacement or reciprocating chiller for data centers

$30ton $5ton

Uninterruptible power supply 20-100 kVA $10kVA $6kVA Uninterruptible power supply gt100 kVA $10kVA $1kVA Mainframe refresh $20kW installed $5kW installed Server refresh $20kW installed $4kW installed Server virtualization $400kW reduction $4kW reduction Thin clients $5units $4units

Lighting (Effective Immediately)

Measure Incentive Effective Immediately Specification Previous

Incentive Specification

New construction exterior LED outdoor flood light LED parking garage and canopy lighting LED polearm mounted parking and roadway lighting LED wall mount fixture

$005kWh (custom)

Lighting Power Density (LPD) Requirements Unchanged

$10-54 fixture

Lighting Power Density (LPD) (Wft2) by Space Type or Building Area

LED Replacement Lamps (Tubes) 2

$250lamp 5 Min Watts Reduced

$250lamp 6 Min Watts Reduced

LED Replacement Lamps (Tubes) 4

$400lamp 10 Min Watts Reduced

$400lamp 12 Min Watts Reduced

Permanent Fixture Removal $010Watt removed

Clarification of calculation to represent actual Wattage removed

$010Watt removed

Lighting (Effective 6117)

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 48

Measure Incentive Effective 6117 Specification Previous

Incentive Previous Specification

Interior LED high-bay fixtures andor retrofit kits if lt 20000 LED Lumens

$50fixture 150 Min Watts Reduced

$75fixture 150 Min Watts Reduced

Interior LED high-bay fixtures andor retrofit kits if gt 20000 LED Lumens

$75fixture 225 Min Watts Reduced

$75fixture 150 Min Watts Reduced

New Incentives

Compressed Air

Measure New Incentive Effective Immediately Variable speed air compressor $30compressor HP Compressed air system optimization $50compressor HP

HVAC

Measure New Incentive Effective Immediately ECM circulation pump $50pump Retro-commissioning cooling systems $750ton Retro-commissioning whole building $010square foot Energy management system $25ton Demand controlled ventilation $25ton Water-cooled air conditioner $22ton

Food Service

Measure New Incentive Effective Immediately Combination oven $200unit ENERGY STARreg commercial convection oven $150unit ENERGY STARreg commercial fryers $100unit ENERGY STARreg commercial hot holding cabinet $200unit

Refrigeration

Measure New Incentive Effective Immediately Air-cooled refrigeration condenser $10ton Oversized condenser with VFD $10ton Case light occupancy controls $750door

Lighting

Measure New Incentive Effective Immediately Interior central lighting controls $00175sq foot

Motors and Drives

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 49

-

Measure New Incentive Effective Immediately VFD for dust collection system motor $50HP

Application Clarifications and Revised Requirements

Clarification of LED Eligibility for New Construction or Retrofit Projects

LED Eligibility is determined by whether lighting products are listed in either the DesignLights Consortium (DLC) Qualified Products List of commercial-grade LED luminaires or the US Environmental Protection Agency database of ENERGY STAR certified products For products not yet listed contractors may submit LM79 and LM80 test reports PECO Smart Ideas engineers will review test reports to determine if the product in question meets performance specifications

Revised W 9 Requirement

W-9 forms EIN numbers are no longer required

Deletion of erroneous statement in New Construction Lighting

The following statement from previous Business Manual has been deleted ldquoThe minimum lighting power density used to calculate the incentive shall be no lower than 50 of the ASHRAE 901-2007 valuerdquo

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 50

  • Commercial amp Industrial Program Application Manual
    • Follow This Easy Process
      • Pre-Approval Application Checklist
      • Final Application Checklist
          • Terms and Conditions
            • Program Effective Dates
            • Program and Project Eligibility
            • Incentive Payment Limits
            • Application Review Process
            • Inspections andor PUCrsquos Statewide Program Evaluation
            • Requirements for Custom Project Electricity Savings Calculation
            • Tax Liability
            • No Endorsement
            • Warranties
            • Limitation of Liability
            • Assignment
            • Customerrsquos Certification
            • Termination
            • Acknowledgement
              • Retrofit Lighting Solutions
                • General Linear Fluorescent Lamp and Ballast Specification Requirements
                • LED Lamps and Fixtures
                • Minimum Watts Reduced
                • Linear LED (Tubes)
                • Permanent Fixture Removal
                  • LED Traffic Signals
                    • LED Traffic Signals Incentive Table
                      • New Construction Lighting Specifications
                        • New Construction Lighting Incentives Table
                          • New Construction Lighting Power Density Code
                              • Exterior New Construction Lighting
                              • HVAC Equipment
                                • Air-Source Air Conditioners and Air-Source Heat Pumps
                                • Package Terminal Systems (Replacements)
                                • Ductless Mini-Split Heat Pump lt54 Tons
                                • Geothermal Heat Pump
                                  • Other HVAC Equipment
                                    • Hotel Guest Room Occupancy Sensor
                                    • ECM Circulation Fan
                                    • ECM Circulation Pump
                                    • Retrocomissioning Cooling Systems
                                    • Retrocomissioning Whole Building
                                    • Energy Management System
                                    • Demand Controlled Ventilation
                                    • Other HVAC Incentives Table
                                      • Unitary HVAC Chillers
                                        • Air-Cooled Chillers Water Cooled Positive Displacement Reciprocating Chillers and Water Cooled Centrifugal Chillers
                                          • Refrigeration
                                            • Anti-Sweat Heater Controls
                                            • Evaporator Fan Controls
                                            • Floating Head Pressure Controls
                                            • Automatic Door Closers for Walk-In Coolers and Freezers
                                            • EC Motor for Walk-inReach-in Refrigerated cases or Freezer cases
                                            • ENERGY STAR Solid Door Freezer and Glass Door Freezer and Refrigerators
                                            • Refrigeration Suction Pipe Insulation
                                            • Night Cover
                                            • Strip Curtain on Walk-In CoolerFreezer
                                            • Evaporator Coil Defrost Control
                                            • Variable Speed Refrigeration Compressor
                                            • Add Doors to Open Refrigerated Cases
                                            • Door Gaskets
                                            • Zero Energy Doors
                                            • Air Cooled Refrigeration Condenser
                                            • Oversized Condenser with VFD
                                            • Case Light Occupancy Controls
                                            • LED Open Case Lighting
                                            • LED Enclosed Case Lighting Refrigerated
                                            • LED Enclosed Case Lighting Freezer
                                              • Food Service
                                                • Beverage and Snack Machine Controls
                                                • ENERGY STARreg Refrigerated Beverage Vending Machines
                                                • ENERGY STARreg Electric Steam Cooker
                                                • ENERGY STARreg Electric Combination Oven
                                                • ENERGY STARreg Commercial Convection Oven
                                                • ENERGY STARreg Commercial Fryers
                                                • ENERGY STARreg Commercial Hot Holding Cabinet
                                                  • Motors and Variable Frequency Drives
                                                    • Early Replacement Motors
                                                    • Variable Frequency Drives on HVAC Fan Applications
                                                    • Variable Frequency Drives on Pump Applications
                                                    • Variable Speed Control for Kitchen Exhaust Hoods
                                                    • Variable Speed Drives for Process or Other Equipment
                                                      • Domestic Hot Water
                                                        • Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater
                                                        • Heat Pump Water Heater
                                                        • Low Flow Pre-Rinse Spray Valve
                                                        • Domestic Hot Water Incentive Table
                                                          • Compressed Air Systems
                                                            • No-loss Condensate Drain
                                                            • Air-Entraining air nozzle
                                                            • Storage Tanks for LoadNo Load Screw Compressors
                                                            • Cycling Refrigerated Thermal Mass Dryer
                                                            • Variable Speed Air Compressor
                                                            • Compressed Air System Optimization
                                                            • Compressed Air Systems Incentive Table
                                                              • Data Centers
                                                                • Air Cooled Chiller
                                                                • Air Cooled Chiller without Condenser
                                                                • Computer Room Air Conditioner
                                                                • Computer Room Air Handler Variable Speed
                                                                  • Replacing constant speed CRAH with VSD CRAH
                                                                    • Water Cooled Centrifugal Chiller
                                                                    • Water Cooled Positive Displacement or Reciprocating Chiller
                                                                    • Uninterruptible Power Supply
                                                                    • Mainframe Refresh
                                                                    • Server Refresh
                                                                      • Whole Building Systems
                                                                        • Whole Building Systems Approach
                                                                        • How to Apply for Whole Building Systems Incentives
                                                                        • Customer Eligibility
                                                                        • Project Eligibility
                                                                        • Whole Building Systems Incentives Table
                                                                          • Custom Project Specifications
                                                                            • Instructions for Energy Savings Calculations for Custom Projects
                                                                            • Equipment Information Submittals
                                                                            • Energy Savings Calculations
                                                                            • Baseline for Custom Analysis
                                                                            • Baseline or Existing System Summary

Energy Management System For installing a web-based building automation system in existing buildings that currently have no digital automated HVAC controls or have outdated pneumatic control systems with inoperable time control functions Existing HVAC control systems must not have time-of-day scheduling Upgrading obsolete EMS HVAC system with inoperable time clock functions will be reviewed on a case-by-case basis for incentive eligibility This incentive cannot be combined with incentives for programmable thermostats or setback-setup controls Must include the controls strategy and a scaled floor-plan with controlled areas highlighted HVAC BAS systems must be new and include bull Central time clock control bull Web-based interface with PC-based controls and graphic bull Building performance Tracking bull Open-protocol architecture controls system shall consist of either LonTalk (ANSICEA 7091) or BACNet (ASHRAE ANSI 135) protocol being used between all controlled and controlling devices and every node on the network bull Minimum setback period must exceed 2200 hours per year bull A minimum setback space temperature of at least 10degF when heating and 5degF when cooling bull Ability to adjust schedules and settings remotely over the internet bull Report generation describing energy and operating trends

This prescriptive measure can be used for facilities with maximum cooling demand less than 456 tons Larger systems require the use of custom HVAC measure

Demand Controlled Ventilation New ventilation controls must use carbon dioxide levels to measure occupancy and modify the percentage of outside air based on occupancy levels Only buildings with space heating and cooling requirements are eligible Conditioned spaces must be kept between 65ordmF and 75ordmF during occupied operating hours Carbon dioxide sensors must be installed in conjunction with fully functioning motor operated outside air dampers Dual temperature air-side economizers with zone-level CO2 sensors for rooftop units are eligible

This prescriptive measure can be used for facilities with maximum cooling demand less than 2210 tons Larger systems require the use of custom HVAC measure

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 28

Other HVAC Measures- consult project manual for eligibility specifications HVAC

Measure Incentive Unit Quantity Incentive

Measure Code er Unit

H1 8 Hotel Guest Room Occupancy Sensor Room $20

H1 9 Economizer Integrated Dual Enthalpy Economizer Controls Ton $1 5

H20 Circulation Fan High-Volume Low-Speed Unit $30

H21 ECM Circulation Fan Fan $1 5

H27 ECM Circulation Pump Pump $50

H28 Retrocommissioning Cooling Systems

Ton $750

H29 Retrocommissioning Whole Buidling

Square Foot $010

H29 Energy Management System Ton $2500

H30 Demand Controlled Ventilation Ton $2500

Other HVAC Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 29

Unitary HVAC Chillers

Air-Cooled Chillers Water Cooled Positive Displacement Reciprocating Chillers and Water Cooled Centrifugal Chillers Chiller applications including existing multiple chiller configurations (including redundant or lsquostand-byrsquo chillers) existing chillers serving multiple load groups and chillers in industrial applications are defined as non-standard applications and must follow a site-specific custom protocol $005kWh) rate

Incentives are offered for chillers with an IPLV value (expressed in kW per ton) that is less than or equal to the qualifying efficiency shown in the table below The chiller efficiency rating must be based on ARI Standard 550590-2003 for IPLV conditions The chillers must meet ARI standards 550590-2003 be UL listed and use a minimum ozone-depleting refrigerant (eg HCFC or HFC) The ARI net capacity value should be used to determine the chiller tons A manufacturerrsquos specification sheet with the rated kWton-IPLV or COP-IPLV must accompany the application along with the four point performance data that is the basis for the IPLV The application must include a certification that the chiller is appropriately sized for site design load conditions

Chillers must satisfy efficiency requirements for both full load and IPLV efficiencies for either Path A or Path B The table shows the minimum efficiency ratings to qualify for the prescriptive incentive which must be consistent with the expected operating conditions of the efficient chiller For example if the efficient chiller satisfies Path A and generally performs at part load the appropriate baseline chiller efficiency is the IPLV value under Path A If the efficient chiller satisfies Path B and generally performs at full load the appropriate baseline chiller efficiency is the full load value under Path B Generally chillers operating above 70 percent load for a majority (50 or more) of operating hours should use Path A and chillers below 70 load for the majority of operating hours should use Path B

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 30

C3 lt 75 tons

C4 75 tons and lt 150 tons

cs ~ 150 tons and lt 300 tons C6 ~ 300 tons

Water Cooled Centrifugal Chillers C7 lt 300 tons CB ~ 300 tons and lt 600 tons

C9 ~ 600 tons

Path A

Qualifying Full Load Efficiency

Qualifying IPLV Efficiency

Path B

Qualifying Full Load Efficiency

Qualifying IPLV Efficiency

0780 kWton 0567 kWton 0800 kWton 0540 kWton

0775 kWton 0554 kWton 0790 kWton 0527 kWton

0680 kWton 0522 kWton 0718 kWton 0486 kWton 0620 kWton 0486 kWton 0639 kWton 0441 kWton

0634 kWton 0536 kWton 0639 kWton 0405 kWton 0576 kWton 0494 kWton 0600 kWton 0360 kWton

0570 kWton 0494 kWton 0590 kWton 0360 kWton

I

Incentive ($ton)

$17

$17

Unitary Chiller Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 31

Refrigeration

Anti-Sweat Heater Controls Incentives are offered for devices that sense the relative humidity in the air outside of the display case and cycles or turns off the glass door (if applicable) and frame anti-sweat heaters when the ambient dew point is below a preset set point Technologies that can turn off anti-sweat heaters based on sensing condensation (on the inner glass pane) also qualify Incentive is based on the number of doors

Evaporator Fan Controls This measure is for the installation of controls in medium temperature walk-in coolers The controller reduces airflow of the evaporator fans when there is no refrigerant flow The measure must control a minimum of 120 HP where fans operate continuously at full speed The measure also must reduce fan motor power by at least 75 during the off cycle This measure is not applicable if any of the following conditions apply 1) Compressor runs all the time with high duty cycle 2) Evaporator fan does not run at full speed all the time 3) Evaporator fan motor runs on poly-phase power 4) Evaporator fan motor is not shaded-pole or permanent split capacitor (PSC) 5) Evaporator fan does not use off-cycle or time-off defrost

Floating Head Pressure Controls Controls must vary head pressure to adjust condensing temperatures in relation to outdoor air temperature Must replace existing constant pressure or manually controlled systems to achieve reduced head pressure in order to maintain a minimum saturated condensing temperature of 70 degF or a 20 degF variance below design heat pressure during mild weather conditions Compressor size must be at least 5 HP

Automatic Door Closers for Walk-In Coolers and Freezers The auto-closer should be applied to the main insulated opaque door(s) of a walk-in cooler or freezer The auto-closer must be able to firmly close that door when it is within one inch of full closure This must be a newly installed automatic door closer replacements on previously installed door closers are not eligible for an incentive

EC Motor for Walk-inReach-in Refrigerated cases or Freezer cases Incentives are offered for replacement of an existing standard-efficiency shaded-pole or permanent split capacitor evaporator fan motor in refrigerated display cases or fan coil in walk-ins The replacement unit must be an Electronically Commutated Motor (ECM) This measure cannot be used in conjunction with the Evaporator Fan Controller measure

ENERGY STAR Solid Door Freezer and Glass Door Freezer and Refrigerators Incentives are offered for replacement of existing self-contained refrigerators and freezers with units that are ENERGY STARreg listed Only units with built-in refrigeration systems are qualified Units with remote refrigeration systems or units do not qualify Customers must provide proof that the appliance meets the CEE or ENERGY STAR efficiency specifications using ASHRAE Standard 72-2005 (38degF plusmn 2degF) Incentive is per unit

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 32

Refrigeration Suction Pipe Insulation 1 Must insulate bare refrigeration suction lines of 1 58 inches in diameter or less on existing equipment only 2 Cooler lines require frac34 inch of flexible closed-cell nitrite rubber or an equivalent insulation 3 Freezer lines require 1-inch of flexible closed-cell nitrite rubber or an equivalent insulation 4 Insulation exposed to the outdoors must be protected from the weather (ie jacketed with a medium-gauge aluminum jacket)

Night Cover 1 Must install a cover on an existing open refrigerated display case to decrease its cooling load during off hours 2 The equipment manufacturer must not object to the use of night covers for the existing display case model 3 This rebate is based on the linear footage of the installed 4 The cover must be applied for a period of at least six hours

Strip Curtain on Walk-In CoolerFreezer 1 New strip curtains or plastic swinging doors must be installed on doorways of refrigerated spaces (conditioned to less than 50deg F) 2 Rebate is based on the linear footage of the doorway that the strip curtains are being installed in 3 Opening between the strip curtain and bottom of doorway must be no larger than 1 inch 4 Strips must have an overlay greater than 1 inch

Evaporator Coil Defrost Control 1The current system must include an operating electric defrost system with a functional electroshymechanical time clock 2 Evaporator coil temperature and pressure must be monitored by controller in order to determine optimal defrost cycles 3 New intelligent control systems to control the defrost systems will typically replace timed- defrost controls

Variable Speed Refrigeration Compressor This measure VSD control for refrigeration systems and its eligibility targets applies to retrofit construction in the commercial and industrial building sectors it is most applicable to grocery stores or food processing applications with refrigeration systems This protocol is for a VSD control system replacing a slide valve control system

Add Doors to Open Refrigerated Cases The eligible retrofit equipment is either no sweat doors or doors with anti-sweat heaters If a lighting retrofit is included with the new doors it must consume the same amount of energy or less energy than the old lighting Upgrades to lighting or other system components should be processed separately Horizontal cases are not eligible and should be processed as custom

Door Gaskets PECO Smart Ideas For Your Business CampI Program Application Manual

Q1 2017 pg 33

This measure is applicable to commercial refrigeration and applies to the replacement of worn-out gaskets with new better-fitting gaskets Applicable gaskets include those located on the doors of walk-in andor reach-in coolers and freezers This protocol applies to the main doors of both low temperature (ldquofreezerrdquo ndash below 32 degF) and medium temperature (ldquocoolerrdquo ndash above 32 degF) walk-ins

Zero Energy Doors For this measure a no-heatlow-heat clear glass door must be installed on an upright display case It is limited to door heights of 57 inches or more Doors must have either heat reflective treated glass be gas filled or both This measure applies to low temperature cases onlymdashthose with a case temperature below 0degF Doors must have 3 or more panes Total door rail glass and frame heater amperage ( 120 volt) cannot exceed 039413 amps per door for low temperature display cases Rebate is based on the door width (not including case frame)

Air Cooled Refrigeration Condenser Approach temperature lt8F for low temperature loads lt13F for medium temperature loads

Oversized Condenser with VFD New standalone condenser must no more than 150 larger than load

Case Light Occupancy Controls Acceptable for freezer or refrigerated cases as well as open cases or cases with doors

LED Open Case Lighting For replacing open case T8 or T12 fluorescent fixtures with DLC listed LEDs on refrigerators coolers and freezers

LED Enclosed Case Lighting Refrigerated LED case lighting with or without motion sensors on enclosed refrigerated vertical displays The baseline equipment is assumed to be cases with uncontrolled T8 or T12 linear fluorescent lamps

LED Enclosed Case Lighting Freezer LED case lighting with or without motion sensors on enclosed freezer vertical displays The baseline equipment is assumed to be cases with uncontrolled T8 or T12 linear fluorescent lamps

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 34

Refrigeration Measures Ref Measure

Measure Incentive Unit IncentiveUnit Code R01 Anti-Sweat Heater Controls Door $30

R02 Evaporator Fan Controls Controller $50

R03 Floating-head Pressure Controls HP $20

R04 Automatic Door Closers fo r Walk-in Coolers Door $75

R05 Automatic Door Closers fo r Walk-in Freezers Door $75

R06 Evaporator Fan EC Motor fo r Reach- in Cases Motor $35

RO Evaporator Fan EC Motor fo r Walk-in Cases Motor $50

R08 ENERGY STARreg Glass Door Freezer lt15 Cu Ft Unit $100

R09 ENERGY STARreg Glass Door Freezer 15- 49 Cu Ft Unit $125

R10 ENERGY STARreg Glass Door Freezer ~ 50 Cu Ft Unit $145

R11 ENERGY STARreg Solid Door Freezer Unit $75

R12 ENERGY STARreg Glass Door Refrigerator lt50 Cu Ft Unit $30

R13 ENERGY STARreg Glass Door Refrigerator gt= 50 Cu Ft Unit $50

K14 t NtKGY ~ I AKreg ~Olld Uoor Ketngerator $ OU Cu t-t Unit $~0

R15 Suction Pipe Insulation Walk-in Coolers Linear Foot $050

R16 Suction Pipe Insulation Walk in Freezers Linear Foot $075

R17 Night Cover Linear Foot $800

R18 Strip Curtains on Walk-in Cooler Linear Foot $250

R19 Evaporator Coil Defrost Control Controller $7500

R20 Variable Speed Refrigeration Compressor Compressor $85

R21 Add Doors to Open Refrigerated Cases Door $55

R22 Door Gaskets Door $250

R23 Zero Energy Doors Door $50

R24 A ir Cooled Refrigeration Condenser Ton $10

R25 Oversized Condenser with VFD Ton $10

R26 Case Light Occupancy Controls Door $8

R27 LED Open Cose Lighting Cose $10

R28 LED Enclosed Case Lighting Refrigerated Door $30

R30 LED Enclosed Case Lighting Freezer Door $30

Refrigeration Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 35

Food Service Beverage and Snack Machine Controls Incentives are offered for refrigerated vending machines that contain non-perishable bottled and canned beverages Controller for both types of systems must include a passive infrared occupancy sensor to turn off fluorescent lights and other energized machine systems when the surrounding area is unoccupied for 15 minutes or longer For the refrigerated machines the control logic may include periodic power up at 2-hour intervals or longer to maintain product temperature and provide compressor protection

ENERGY STARreg Refrigerated Beverage Vending Machines Incentives are offered for ENERGY STARreg beverage vending machines Qualifying machines can be found at httpswwwenergystargovproductsothervending_machines

ENERGY STARreg Electric Steam Cooker This measure applies to the installation of electric ENERGY STAR steam cookers as either a new item or replacement for an existing unit Gas steam cookers are not eligible The steam cookers must meet minimum ENERGY STAR efficiency requirements A qualifying steam cooker must meet a minimum cooking efficiency of 50 percent and meet idle energy rates specified by pan capacity

ENERGY STARreg Electric Combination Oven This measure applies to electric ovens capable of handling single 12 x 20 x 25 pan per rack

ENERGY STARreg Commercial Convection Oven The oven must meet or exceed heavy load potato cooking energy efficiency of greater than 70 utilizing ASTM Standard F149 Applies only to electric ovens

ENERGY STARreg Commercial Fryers The commercial fryer must have a tested heavy load (French fry for large vats) cooking energy efficiency of greater than 80 utilizing American Society for Testing and Materials (ASTM) Standard F1361 for commercial fryers and ASTM Standard F2144 for large vat fryers Multiple vat configurations are paid per qualifying vat ENERGY STAR maintains a list of qualifying products and specifications at httpwwwenergystargov

ENERGY STARreg Commercial Hot Holding Cabinet Energy STAR rating electric

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 36

Food Service amp Other Measures FoodOther

Measure Incentive Unit Incentive

Measure Code Unit

F01 Beverage Machine Controls Unit $25

F02 Snack Machine Controls Unit $20

F03 ENERGY STARreg Refrigerated Beverage Vending Machir Unit $125

F04 ENERGY STARreg Commerc ial Steam Cooker Unit $200

F05 ENERGY STARreg Electric Combination Oven Unit $200

F06 ENERGY STARreg Commercial Electric Convection Oven Unit $150

F07 ENERGY STARreg Commerc ial Fryers Unit $100

F08 ENERGY STARregCommerc ial Hot Holding Cabinet Unit $200

Food Service Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 37

Motors and Variable Frequency DrivesEarly Replacement Motors For constant speed and uniformly loaded motors this measure applies to the replacement of old motors with new energy efficient motors of the same rated horsepower Old motors must be less than 15 years Replacements where the old motor and new motor have different horsepower ratings are considered custom measures Motors with variable speeds variable loading or industrial-specific applications are also considered custom measures

Motors Incentive Table Motors

Measure Code

HP Incentive per Motor

M01 15 - 10 $40 M02 11 - 50 $100 M03 51-100 $150 M04 gt100 $300

Only VFDs on unitary systems are eligible Non-unitary systems must be submitted as a custom measure Soft start motors are not eligible

Variable Frequency Drives on HVAC Fan Applications Incentives are offered for installing VFDs on existing HVAC fans that do not have pre-existing VFDs This measure applies to HVAC supply and return fans only All other fans including cooling tower fans must be submitted as custom measures Manually fixed speed settings on HVAC fans must be submitted via custom application The VFD must control motor speed automatically in response to pressure flow temperature or other variable signal The installation of a VSD must accompany the permanent removal or disabling of any throttling devices such as inlet vanes bypass dampers and throttling valves etc The incentive is offered per controlled HP

Variable Frequency Drives on Pump Applications Incentives are offered for installing VFDs on existing chilled water pumps and heating hot water pumps that do not have existing VFDs This measure applies to chilled water pumps and heating hot water pumps only All other pumps must be submitted as custom measures Manually fixed speed settings on pumps must be submitted via custom application The VFD must control motor speed automatically in response to pressure flow temperature or other variable signal The installation of a VSD must accompany the permanent removal or disabling of any throttling devices such as throttling valves The incentive is offered per controlled HP

Variable Speed Control for Kitchen Exhaust Hoods The measure consists of installing a new VSD in conjunction with a sensor control system that varies the exhaust rate of kitchen ventilation (exhaust andor makeup air fans) based on the heat and effluent output from the cooking appliances (ie the more heat and smokevapors generated the more ventilation needed) This involves installing a temperature sensor in the hood exhaust collar andor an optic sensor on the end of the hood that senses cooking conditions and allows the system to automatically vary the rate of exhaust to match requirements by adjusting the fan speed accordingly

Variable Speed Drives for Process or Other Equipment VFD must be used in conjunction with a process (non HVAC) application To qualify for this incentive the driven equipment must operate at least 2000 hours per year Redundant or back- up units do not qualify VFDs replacing existing VFDs do not qualify The VFD must control motor

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 38

speed automatically in response to pressure flow temperature or other variable signal VFDs installed as ldquosoft startrdquo without automatic manual closed loop speed control do not qualify The installation of a VFD must accompany the permanent removal or disabling of any throttling devices such as throttling valves The incentive is per controlled HP and only applies to controlled motors less than 50 HP

VSDVFD Incentives Table VFD

Measure Code

Measure Unit Incentive per Unit

Fan Application

V01 VFD on HVAC Fan HP $25 Pump Application

Variable Speed Control for Kitchen Exhaust Hoods

Variable Speed Drives for Process or Other Equipment

V02 VFD on Chilled Water Pumps HP $25 V03 VFD on Heating Hot Water Pumps HP $25

V04 Kitchen Exhaust Fan Retrofit Hood HP $500

V05 Process Motor lt 50 HP HP $50

Domestic Hot Water Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater This measure documents the energy savings attributed to converting from a standard electric water heater to an ENERGY STAR natural gaspropane-fired water heater or a standard oil-fired water heater with an Energy Factor of 0585

Heat Pump Water Heater This includes heat pump water heaters with energy factors meeting ENERGY STAR criteria The measure described here involves a direct retrofit of a resistive electric water heater with a heat pump water heater It does not cover systems where the heat pump is a pre-heater or is combined with other water heating sources More complicated installations can be treated as custom projects

Low Flow Pre-Rinse Spray Valve This measure applies to efficient low flow pre-rinse sprayers in grocery and food service applications The most likely areas of application are kitchens in restaurants and hotels Only premises with electric water heating may qualify for this incentive In addition the replacement pre-rinse spray nozzle must use less than 16 gallons per minute with a cleanability performance of 26 seconds per plate or less Low flow pre-rinse sprayers reduce hot water usage and save energy associated with water heating

Domestic Hot Water Incentive Table

Measure Code Measure Unit Retrofit Incentive per

Unit

W01 Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater Unit $100

W02 Heat Pump Water Heater Unit $100 W03 Low-Flow Pre-Rinse Spray Valve Valve $17

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 39

Compressed Air SystemsNo-loss Condensate Drain No-loss Condensate Drains are controlled by a sensor that monitors the level of condensate and only open when there is a need to drain condensate They close before compressed air is allowed to escape This measure is targeted to non-residential customers whose equipment is a timed drain that operates on a pre-set schedule Acceptable baseline conditions are compressed air systems with standard condensate drains operated by a solenoid and timer

Air-Entraining air nozzle This measure is targeted to non-residential customers whose compressed air equipment uses stationary air nozzles in a production application with an open copper tube of 18rdquo or 14rdquo orifice diameter Energy efficient conditions require replacement of an inefficient non-air entraining air nozzle with an energy efficient air-entraining air nozzle that use less than 15 CFM at 100 psi for industrial applications

Storage Tanks for LoadNo Load Screw Compressors This measure protocol applies to the installation of air receivers with pressureflow controls to loadno load compressors Loadno load compressors unload when there is low demand The process of unloading is done over a period of time to avoid foaming of the lubrication oil Using a storage tank with pressureflow control will buffer the air demands on the compressor Reducing the number of cycles in turn reduces the number of transition times from load to no load and saves energy The baseline equipment is a loadno load compressor with a 1 galcfm storage ratio or a modulating compressor with blowdown The high efficiency equipment is a loadno load compressor with a minimum storage ratio of 4 gallons of storage per cfm

Cycling Refrigerated Thermal Mass Dryer When air is compressed water vapor in the air condenses and collects in liquid form Some of this condensate collects in the air distribution system and can contaminate downstream components such as air tools with rust oil and pipe debris Refrigerated air dryers remove the water vapor by cooling the air to its dew point and separating the condensate Changes in production and seasonal variations in ambient air temperature lead to partial loading conditions on the dryer Standard air dryers use a hot gas bypass system that is inefficient at partial loads A Cycling Thermal Mass Dryer uses a thermal storage medium to store cooling capacity when the system is operated at partial loads allowing the dryer refrigerant compressor to cycle

This measure is targeted to non-residential customers whose equipment is a non-cycling refrigerated air dryer with a capacity of 600 cfm or below Acceptable baseline conditions are a non-cycling (eg continuous) air dryer with a capacity of 600 cfm or below The replacement of desiccant deliquescent heat-of-compression membrane or other types of dryers does not qualify under this measure

Variable Speed Air Compressor This type of compressor uses a special drive to control the speed (RPM) of the unit which in turn saves energy compared to a fixed speed equivalent

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 40

No-loss Condensate Drain Air-Entraining Air Nozzle Cycling Refrigerated Thermal Mass Dryer

Compressor Incentive per

Equipment Type Units Quantity Daily Operating Unit

Hours

CA04 Storage Tanks for LoadNo Load Screw

Compressor HP $10 Compressors

CA05 Variable Speed Air Compressor

Compressor HP $30

CA06 Compressed Air System Optimization

Compressor HP $50

Compressed Air System Optimization The submitted optimization measures must be identified in an Air System Audit or equivalent study to be eligible The measures must demonstrate energy savings as evaluated by a Program Engineer Additionally measures must also fall under one or more of the category below to be eligible

1) Install storage Receivers (new receivers only replacing existing storage receivers are ineligible)

2) Compressor control (must demonstrate improvement in partial load efficiency of the compress air system including reduceeliminate partially loaded units)

3) Dryer control 4) Source pressure reduction 5) Right-sizing distribution components such as piping filters regulators

connectors and hoses (routine maintenance replacements are ineligible) 6) Leakage detection and repair 7) Eliminate low-efficiency end-usages of compressed air 8) Heat recovery (most reduce electricity consumption of the replaced heat source)

Compressed Air Systems Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 41

lt65000 Btuh

~ 65000 Btuh and lt135000 Btuh

135000 Btuhand lt240000 Btuh

240000 Btuh and lt760000 Btuh

760000 Btuh

154

142

135

125

123

Chiller Capacity Path APath B efficiency (kWton )

lt 150 tons

~150 tons and lt300 tons

300 tons and lt400 tons

400 tons and lt600 tons

600 tons

lt75 tons

~75 tons and lt150 tons

~150 tons and lt300 tons

~300 tons and lt600 tons

600 tons

0610 FU0695 FL and 0550 IPLV0440 IPLV

0610 FU0635 FL and 0550 IPLV0400 IPLV

0560 FU0595 FL and 0520 IPLV0390 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

Path APath B efficiency (kWton )

0750 FU0780 FL and 0600 IPLV0500 IPLV

0720 FU0750 FL and 0560 IPLV0490 IPLV

0660 FU0680 FL and 0540 IPLV0440 IPLV

0610 FU0625 FL and 0520 IPLV0410 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

Data Centers Data Center incentives are available for facilities ranging in size from office server closets to large standalone facilities

Air Cooled Chiller Path APath B EER (BtuWh) lt150 tons 101 FL97 FL and 137 IPLV158 IPLV ge150 tons 101 FL97 FL and 140 IPLV161 IPLV

Air Cooled Chiller without Condenser Air-cooled chillers without condenser must be rated with matching condensers and comply with air-cooled chiller efficiency requirements

Computer Room Air Conditioner

Computer Room Air Handler Variable Speed Replacing constant speed CRAH with VSD CRAH

Water Cooled Centrifugal Chiller

Water Cooled Positive Displacement or Reciprocating Chiller

Uninterruptible Power Supply Must be Energy Star Certified UPS or have full load efficiency rating

ge948 for 20-100 kVA ge978for ge100 kVA

Mainframe Refresh The rated efficiency of the replacement Mainframes power supply must be at least 8 more

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 42

- Equipment Type Units IncentiveUnit

D1 Air Cooled Chiller Ton $4000 D2 Air Cooled Chiller W ithout Condenser Ton $2000 D3 Computer Room Air Conditioner Ton $3000 D4 Computer Room Air Handler Variable Speed Ton $1000 D5 Water Cooled Centrifugal Chiller Ton $3000 D6 Water Cooled Positive Displacement or Reciprocatin $3000 D7 Uninterruptible Power Supply 20-100 kVA $1000 D8 Uninterruptible Power Supply gt 100 kVA $1000 D9 Mainframe Refresh $2000

D10 Server Refresh $2000 D11 PC Power Managment System $600 D12 HVAC System Optimization $005 D1 3 HoUCold Aisle Containment kWh saved $005 D14 Server Virtualization kW reduction $40000 D1 5 Thin Clients Units $500

efficient compared to the existing Mainframes power supply The replacement Mainframe if Inactive must be decommissioned and removed from the Data Center

Server Refresh Replacement servers must be ENERGY STARreg certified Replacement servers power supply must be 5 more efficiency compared to the power supply of the replaced servers The replaced server must be decommissioned and removed from the data center

HVAC System Optimization Final system must have these features

-Implementation of free cooling by the addition of an economizer system -Conversion of constant speed CRACCRAH into variable speed operations using VFDs and additional control functionalities and -Elevation of exhaust air temperature

HotCold Aisle Containment Includes both Hot and Cold Aisles Installing new containment measures not replacing already existed aisle containment Plenum-only installations not eligible Must result in higher difference between the return air (hot aisle) and supply air (cold aisle) temperatures measured at rack intake and exhaust locations

Server Virtualization Minimum of consolidating 5 Servers virtualized into one Server The virtualized servers if inactive are removed from the Data Center

Thin Clients Must be ENERGY STAR certified thin clients Decommissioned clients are removed from the Data Center

Data Center Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 43

Whole Building Systems Whole Building Systems Approach

The Whole Building Systems approach is intended to encourage integrated energy efficient designs by providing enhanced incentives to the customer who addresses overall energy performance Owners of eligible and qualifying new construction and major renovation projects can receive Whole Building Systems incentives when energy modeling indicates the projectrsquos performance is over 10 better than the ASHRAE 901-2007 Savings from eligible electric end-uses in kilowatt hours define the amount of financial incentive Energy savings achieved through renewable energy sources are not counted toward project energy savings and are not included in the savings basis Incentive reservations obtained during the design phase of a project will be honored for up to 24 months

How to Apply for Whole Building Systems Incentives Before construction begins bull A Pre-notification Application must be submitted documenting the Owners intention to

seek Whole Building Systems incentives bull The Owner must confirm the goals and energy efficiency strategies being pursued by the

design team on the completed Pre-notification Worksheet (Checklist tab) and in the project Summary (Whole Building Performance Summary tab)

bull Submit executable building modeling software files bull Submit the Whole Building Performance Summary worksheet energy simulation model

inputs and outputs and supporting documentation bull Receive confirmation and eligibility notification from the PECO Smart Ideas team and

receive an incentive reservation bull The final incentive paid may differ from the reserved incentive amount The final

incentive will be calculated based on site-verified equipment installation and performance The Owners final application and complete documentation must be received within 6 months of equipment installation or certificate of occupancy whichever is later

bull An executable energy model and model output demonstrating compliance with the criteria of ASHRAE 901-2007 Appendix G will be required and the equipment data sheets LED lighting fixtures must be on the DLC or Energy STAR qualified products list (QPL) to be eligible LED fixtures not on the DLC or Energy STAR QPL has the option of submitting LM79 and LM80 test reports for evaluation against DLC and Energy STAR eligibility criteria

During the construction period bull Owner and design team continue to work closely with their chosen contractor to assure

energy efficiency measures are included and installed in the completed building

When the building is constructed and operational bull Complete the Owner final application Request an equipment verification site visit by the

PECO Smart Ideas team Equipment must be installed and fully operational o Program staff will schedule a site visit and utilize submitted documentation and

measurement tools to verify that the installation follows the submitted energy simulation model

bull When PECO confirms that there are no significant changes to the installed equipment payment of the reserved incentive will be made to the Owner within 6 weeks

bull If changes from the proposed design energy simulation are found the Owner and design team will be notified of the reduced incentive amount a period of 20 calendar days will

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 44

Improvement Incentive per Sq Ft

over Code

~11 to lt20 $0155

~20 to lt30 $0233

~30 to lt40 $0350

~40 to lt60 $0525

~60 $0700

be allowed for supplemental information to be provided if no additional information is received by PECO Smart Ideas team the reduced incentive payments will be made and sent to the Owner if additional clarification and information is available program staff will work diligently to resolve the discrepancies and arrive at a reasonable incentive adjustment with the customer

Payments made by PECO Smart Ideas are final

Customer Eligibility The Owner of the proposed new building project must be a customer of PECO and receive delivery of electric service from PECO to receive kilowatt-hour based incentives Please note that electricity supply can be provided by any vendor

Project Eligibility bull The project must be a new construction or major renovation Major renovations involving

the removal and redesign of at least two building systems (such as interior lighting and mechanical systems) may apply for Whole Building Systems incentives

bull To qualify for incentives projects must demonstrate energy efficiency enhancements that achieve at least 11 improvement in the proposed design versus the standard baseline

bull The Owner must submit a Pre-approval Application to the program at the stage where changes for increased energy efficiency are still feasible and construction has not been completed

bull Projects receiving Whole Building Systems incentives are not eligible to receive other incentives such as the prescriptive or custom program incentives for the same scope

bull Project components that are NOT eligible for consideration as a basis for PECO Smart Ideas include the following o Alternative fuel sources (eg use of gas or oil equipment in lieu of electric) Please note

that combined heat and power (CHP) systems will be incentivized for the electricity they produce

o Renewable energy sources (eg solar wind biomass) bull Ineligible savings include exterior lighting process receptacle miscellaneous loads and

other unregulated end-uses Custom incentives are available for new construction exterior lighting

Whole Building Systems Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 45

Custom Project Specifications Instructions for Energy Savings Calculations for Custom Projects Custom projects must involve measures that result in a reduction in electric energy use (kWh) Electricity savings may result from either efficiency improvements or fuel switching Custom Incentives are based on the first year kilowatt-hour savings Custom applications must be accompanied by detailed engineering calculations that document the annual total energy savings

The following serve as guidelines for the minimum required documentation

Equipment Information Submittals bull A list of the present and proposed equipment and components to be installed

including manufacturerrsquos catalogmodel number bull Manufacturerrsquos specification sheets showing capacities and performance for all major

components

Energy Savings Calculations Provide calculations documenting the predicted energy consumption of the existing (or baseline) and proposed system using appropriate analytical tools and clearly stated assumptions Calculations may be performed by ldquohandrdquo but spreadsheet analysis or more rigorous modeling is preferred All analysis should be provided in electronic format All assumptions such as operating hours existing and proposed equipment operational details must be presented Engineering algorithms and procedures from recognized technical organizations such as ASHRAE SMACNA ANSI etc must be used Use rated performance factors tested under accepted procedures specified by recognized rating agencies such as AHRI ANSI ASTM etc Provide an explanation when equipment performance rating conditions vary from standard conditions

In support of the calculations extensive documentation must be provided that provides the basis for the savings estimates The documentation must provide information on the equipment operating schedule daily and seasonal load profile and baseline AND energy efficient equipment performance at the operating loads Typical documentation for custom projects often includes bull Engineering or architectural drawings and ldquoequipment schedulerdquo sheets bull Component specification sheets that include part load efficiency or performance

factors bull Spreadsheet calculations or inputoutput files and results from system modeling or

other engineering analysis using accepted engineering algorithms and practices bull Log sheets trend logs from a building management system or other operating

documentation that are often necessary to document operating hours and equipment loading and used as a basis for the calculations (in some cases short term monitoring may be required to document the load profile)

bull Control sequence of operations that are necessary where controls play a part in the savings equation

Additional documentation other than that described in the application may be required for program participation Larger projects may also require pre- and post-project sub metering or monitoring of loads andor power input as part of another measurement and verification activity to demonstrate the actual energy savings that are realized

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 46

Baseline for Custom Analysis Where equipment is replaced prior to the end of its rated service life in order to achieve energy savings the existing equipment performance may be used as the baseline in the energy savings calculations Where equipment is replaced due to failure or for other reasons (such as obsolescence or a need for more capacity) the baseline performance used in the savings calculation should be either the minimum performance that would be required by code for that equipment type and application (where a code applies) or the performance of the equipment that would have been selected as the customers standard practice when a code does not apply

Baseline or Existing System Summary On custom worksheet on application form include make model number name plate information (such as operating voltage and rated full load amps) rated capacity quantities equipment condition and age facility operating hours equipment operating schedule and load curves If needed attach separate sheets

All decisions regarding incentives for custom projects are in the sole discretion of PECO

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 47

APPENDIX PROGRAM UPDATES SUMMARY (Q1 2017) Multifamily Nursing Home and Assisted Living retrofit customers need to apply for incentives through the PECO Smart Ideas Multi-Family Program administered by Franklin Energy For more information please contact Taylor Adler at tadlerfranklinenergycom or call 1-844-4BIZ-SAVE Multifamily Nursing Home and Assisted Living new construction customers can proceed with applying for incentives here

Revised Incentives

Data Centers

Measure Incentive Effective Immediately Previous Incentive

Air-cooled chiller for data centers $40ton $10ton Air-cooled chiller without condenser for data centers $20ton $10ton

Computer room air conditioner $30ton $7ton Water-cooled centrifugal chiller for data centers $30ton $5ton Water-cooled positive displacement or reciprocating chiller for data centers

$30ton $5ton

Uninterruptible power supply 20-100 kVA $10kVA $6kVA Uninterruptible power supply gt100 kVA $10kVA $1kVA Mainframe refresh $20kW installed $5kW installed Server refresh $20kW installed $4kW installed Server virtualization $400kW reduction $4kW reduction Thin clients $5units $4units

Lighting (Effective Immediately)

Measure Incentive Effective Immediately Specification Previous

Incentive Specification

New construction exterior LED outdoor flood light LED parking garage and canopy lighting LED polearm mounted parking and roadway lighting LED wall mount fixture

$005kWh (custom)

Lighting Power Density (LPD) Requirements Unchanged

$10-54 fixture

Lighting Power Density (LPD) (Wft2) by Space Type or Building Area

LED Replacement Lamps (Tubes) 2

$250lamp 5 Min Watts Reduced

$250lamp 6 Min Watts Reduced

LED Replacement Lamps (Tubes) 4

$400lamp 10 Min Watts Reduced

$400lamp 12 Min Watts Reduced

Permanent Fixture Removal $010Watt removed

Clarification of calculation to represent actual Wattage removed

$010Watt removed

Lighting (Effective 6117)

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 48

Measure Incentive Effective 6117 Specification Previous

Incentive Previous Specification

Interior LED high-bay fixtures andor retrofit kits if lt 20000 LED Lumens

$50fixture 150 Min Watts Reduced

$75fixture 150 Min Watts Reduced

Interior LED high-bay fixtures andor retrofit kits if gt 20000 LED Lumens

$75fixture 225 Min Watts Reduced

$75fixture 150 Min Watts Reduced

New Incentives

Compressed Air

Measure New Incentive Effective Immediately Variable speed air compressor $30compressor HP Compressed air system optimization $50compressor HP

HVAC

Measure New Incentive Effective Immediately ECM circulation pump $50pump Retro-commissioning cooling systems $750ton Retro-commissioning whole building $010square foot Energy management system $25ton Demand controlled ventilation $25ton Water-cooled air conditioner $22ton

Food Service

Measure New Incentive Effective Immediately Combination oven $200unit ENERGY STARreg commercial convection oven $150unit ENERGY STARreg commercial fryers $100unit ENERGY STARreg commercial hot holding cabinet $200unit

Refrigeration

Measure New Incentive Effective Immediately Air-cooled refrigeration condenser $10ton Oversized condenser with VFD $10ton Case light occupancy controls $750door

Lighting

Measure New Incentive Effective Immediately Interior central lighting controls $00175sq foot

Motors and Drives

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 49

-

Measure New Incentive Effective Immediately VFD for dust collection system motor $50HP

Application Clarifications and Revised Requirements

Clarification of LED Eligibility for New Construction or Retrofit Projects

LED Eligibility is determined by whether lighting products are listed in either the DesignLights Consortium (DLC) Qualified Products List of commercial-grade LED luminaires or the US Environmental Protection Agency database of ENERGY STAR certified products For products not yet listed contractors may submit LM79 and LM80 test reports PECO Smart Ideas engineers will review test reports to determine if the product in question meets performance specifications

Revised W 9 Requirement

W-9 forms EIN numbers are no longer required

Deletion of erroneous statement in New Construction Lighting

The following statement from previous Business Manual has been deleted ldquoThe minimum lighting power density used to calculate the incentive shall be no lower than 50 of the ASHRAE 901-2007 valuerdquo

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 50

  • Commercial amp Industrial Program Application Manual
    • Follow This Easy Process
      • Pre-Approval Application Checklist
      • Final Application Checklist
          • Terms and Conditions
            • Program Effective Dates
            • Program and Project Eligibility
            • Incentive Payment Limits
            • Application Review Process
            • Inspections andor PUCrsquos Statewide Program Evaluation
            • Requirements for Custom Project Electricity Savings Calculation
            • Tax Liability
            • No Endorsement
            • Warranties
            • Limitation of Liability
            • Assignment
            • Customerrsquos Certification
            • Termination
            • Acknowledgement
              • Retrofit Lighting Solutions
                • General Linear Fluorescent Lamp and Ballast Specification Requirements
                • LED Lamps and Fixtures
                • Minimum Watts Reduced
                • Linear LED (Tubes)
                • Permanent Fixture Removal
                  • LED Traffic Signals
                    • LED Traffic Signals Incentive Table
                      • New Construction Lighting Specifications
                        • New Construction Lighting Incentives Table
                          • New Construction Lighting Power Density Code
                              • Exterior New Construction Lighting
                              • HVAC Equipment
                                • Air-Source Air Conditioners and Air-Source Heat Pumps
                                • Package Terminal Systems (Replacements)
                                • Ductless Mini-Split Heat Pump lt54 Tons
                                • Geothermal Heat Pump
                                  • Other HVAC Equipment
                                    • Hotel Guest Room Occupancy Sensor
                                    • ECM Circulation Fan
                                    • ECM Circulation Pump
                                    • Retrocomissioning Cooling Systems
                                    • Retrocomissioning Whole Building
                                    • Energy Management System
                                    • Demand Controlled Ventilation
                                    • Other HVAC Incentives Table
                                      • Unitary HVAC Chillers
                                        • Air-Cooled Chillers Water Cooled Positive Displacement Reciprocating Chillers and Water Cooled Centrifugal Chillers
                                          • Refrigeration
                                            • Anti-Sweat Heater Controls
                                            • Evaporator Fan Controls
                                            • Floating Head Pressure Controls
                                            • Automatic Door Closers for Walk-In Coolers and Freezers
                                            • EC Motor for Walk-inReach-in Refrigerated cases or Freezer cases
                                            • ENERGY STAR Solid Door Freezer and Glass Door Freezer and Refrigerators
                                            • Refrigeration Suction Pipe Insulation
                                            • Night Cover
                                            • Strip Curtain on Walk-In CoolerFreezer
                                            • Evaporator Coil Defrost Control
                                            • Variable Speed Refrigeration Compressor
                                            • Add Doors to Open Refrigerated Cases
                                            • Door Gaskets
                                            • Zero Energy Doors
                                            • Air Cooled Refrigeration Condenser
                                            • Oversized Condenser with VFD
                                            • Case Light Occupancy Controls
                                            • LED Open Case Lighting
                                            • LED Enclosed Case Lighting Refrigerated
                                            • LED Enclosed Case Lighting Freezer
                                              • Food Service
                                                • Beverage and Snack Machine Controls
                                                • ENERGY STARreg Refrigerated Beverage Vending Machines
                                                • ENERGY STARreg Electric Steam Cooker
                                                • ENERGY STARreg Electric Combination Oven
                                                • ENERGY STARreg Commercial Convection Oven
                                                • ENERGY STARreg Commercial Fryers
                                                • ENERGY STARreg Commercial Hot Holding Cabinet
                                                  • Motors and Variable Frequency Drives
                                                    • Early Replacement Motors
                                                    • Variable Frequency Drives on HVAC Fan Applications
                                                    • Variable Frequency Drives on Pump Applications
                                                    • Variable Speed Control for Kitchen Exhaust Hoods
                                                    • Variable Speed Drives for Process or Other Equipment
                                                      • Domestic Hot Water
                                                        • Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater
                                                        • Heat Pump Water Heater
                                                        • Low Flow Pre-Rinse Spray Valve
                                                        • Domestic Hot Water Incentive Table
                                                          • Compressed Air Systems
                                                            • No-loss Condensate Drain
                                                            • Air-Entraining air nozzle
                                                            • Storage Tanks for LoadNo Load Screw Compressors
                                                            • Cycling Refrigerated Thermal Mass Dryer
                                                            • Variable Speed Air Compressor
                                                            • Compressed Air System Optimization
                                                            • Compressed Air Systems Incentive Table
                                                              • Data Centers
                                                                • Air Cooled Chiller
                                                                • Air Cooled Chiller without Condenser
                                                                • Computer Room Air Conditioner
                                                                • Computer Room Air Handler Variable Speed
                                                                  • Replacing constant speed CRAH with VSD CRAH
                                                                    • Water Cooled Centrifugal Chiller
                                                                    • Water Cooled Positive Displacement or Reciprocating Chiller
                                                                    • Uninterruptible Power Supply
                                                                    • Mainframe Refresh
                                                                    • Server Refresh
                                                                      • Whole Building Systems
                                                                        • Whole Building Systems Approach
                                                                        • How to Apply for Whole Building Systems Incentives
                                                                        • Customer Eligibility
                                                                        • Project Eligibility
                                                                        • Whole Building Systems Incentives Table
                                                                          • Custom Project Specifications
                                                                            • Instructions for Energy Savings Calculations for Custom Projects
                                                                            • Equipment Information Submittals
                                                                            • Energy Savings Calculations
                                                                            • Baseline for Custom Analysis
                                                                            • Baseline or Existing System Summary

Other HVAC Measures- consult project manual for eligibility specifications HVAC

Measure Incentive Unit Quantity Incentive

Measure Code er Unit

H1 8 Hotel Guest Room Occupancy Sensor Room $20

H1 9 Economizer Integrated Dual Enthalpy Economizer Controls Ton $1 5

H20 Circulation Fan High-Volume Low-Speed Unit $30

H21 ECM Circulation Fan Fan $1 5

H27 ECM Circulation Pump Pump $50

H28 Retrocommissioning Cooling Systems

Ton $750

H29 Retrocommissioning Whole Buidling

Square Foot $010

H29 Energy Management System Ton $2500

H30 Demand Controlled Ventilation Ton $2500

Other HVAC Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 29

Unitary HVAC Chillers

Air-Cooled Chillers Water Cooled Positive Displacement Reciprocating Chillers and Water Cooled Centrifugal Chillers Chiller applications including existing multiple chiller configurations (including redundant or lsquostand-byrsquo chillers) existing chillers serving multiple load groups and chillers in industrial applications are defined as non-standard applications and must follow a site-specific custom protocol $005kWh) rate

Incentives are offered for chillers with an IPLV value (expressed in kW per ton) that is less than or equal to the qualifying efficiency shown in the table below The chiller efficiency rating must be based on ARI Standard 550590-2003 for IPLV conditions The chillers must meet ARI standards 550590-2003 be UL listed and use a minimum ozone-depleting refrigerant (eg HCFC or HFC) The ARI net capacity value should be used to determine the chiller tons A manufacturerrsquos specification sheet with the rated kWton-IPLV or COP-IPLV must accompany the application along with the four point performance data that is the basis for the IPLV The application must include a certification that the chiller is appropriately sized for site design load conditions

Chillers must satisfy efficiency requirements for both full load and IPLV efficiencies for either Path A or Path B The table shows the minimum efficiency ratings to qualify for the prescriptive incentive which must be consistent with the expected operating conditions of the efficient chiller For example if the efficient chiller satisfies Path A and generally performs at part load the appropriate baseline chiller efficiency is the IPLV value under Path A If the efficient chiller satisfies Path B and generally performs at full load the appropriate baseline chiller efficiency is the full load value under Path B Generally chillers operating above 70 percent load for a majority (50 or more) of operating hours should use Path A and chillers below 70 load for the majority of operating hours should use Path B

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 30

C3 lt 75 tons

C4 75 tons and lt 150 tons

cs ~ 150 tons and lt 300 tons C6 ~ 300 tons

Water Cooled Centrifugal Chillers C7 lt 300 tons CB ~ 300 tons and lt 600 tons

C9 ~ 600 tons

Path A

Qualifying Full Load Efficiency

Qualifying IPLV Efficiency

Path B

Qualifying Full Load Efficiency

Qualifying IPLV Efficiency

0780 kWton 0567 kWton 0800 kWton 0540 kWton

0775 kWton 0554 kWton 0790 kWton 0527 kWton

0680 kWton 0522 kWton 0718 kWton 0486 kWton 0620 kWton 0486 kWton 0639 kWton 0441 kWton

0634 kWton 0536 kWton 0639 kWton 0405 kWton 0576 kWton 0494 kWton 0600 kWton 0360 kWton

0570 kWton 0494 kWton 0590 kWton 0360 kWton

I

Incentive ($ton)

$17

$17

Unitary Chiller Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 31

Refrigeration

Anti-Sweat Heater Controls Incentives are offered for devices that sense the relative humidity in the air outside of the display case and cycles or turns off the glass door (if applicable) and frame anti-sweat heaters when the ambient dew point is below a preset set point Technologies that can turn off anti-sweat heaters based on sensing condensation (on the inner glass pane) also qualify Incentive is based on the number of doors

Evaporator Fan Controls This measure is for the installation of controls in medium temperature walk-in coolers The controller reduces airflow of the evaporator fans when there is no refrigerant flow The measure must control a minimum of 120 HP where fans operate continuously at full speed The measure also must reduce fan motor power by at least 75 during the off cycle This measure is not applicable if any of the following conditions apply 1) Compressor runs all the time with high duty cycle 2) Evaporator fan does not run at full speed all the time 3) Evaporator fan motor runs on poly-phase power 4) Evaporator fan motor is not shaded-pole or permanent split capacitor (PSC) 5) Evaporator fan does not use off-cycle or time-off defrost

Floating Head Pressure Controls Controls must vary head pressure to adjust condensing temperatures in relation to outdoor air temperature Must replace existing constant pressure or manually controlled systems to achieve reduced head pressure in order to maintain a minimum saturated condensing temperature of 70 degF or a 20 degF variance below design heat pressure during mild weather conditions Compressor size must be at least 5 HP

Automatic Door Closers for Walk-In Coolers and Freezers The auto-closer should be applied to the main insulated opaque door(s) of a walk-in cooler or freezer The auto-closer must be able to firmly close that door when it is within one inch of full closure This must be a newly installed automatic door closer replacements on previously installed door closers are not eligible for an incentive

EC Motor for Walk-inReach-in Refrigerated cases or Freezer cases Incentives are offered for replacement of an existing standard-efficiency shaded-pole or permanent split capacitor evaporator fan motor in refrigerated display cases or fan coil in walk-ins The replacement unit must be an Electronically Commutated Motor (ECM) This measure cannot be used in conjunction with the Evaporator Fan Controller measure

ENERGY STAR Solid Door Freezer and Glass Door Freezer and Refrigerators Incentives are offered for replacement of existing self-contained refrigerators and freezers with units that are ENERGY STARreg listed Only units with built-in refrigeration systems are qualified Units with remote refrigeration systems or units do not qualify Customers must provide proof that the appliance meets the CEE or ENERGY STAR efficiency specifications using ASHRAE Standard 72-2005 (38degF plusmn 2degF) Incentive is per unit

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 32

Refrigeration Suction Pipe Insulation 1 Must insulate bare refrigeration suction lines of 1 58 inches in diameter or less on existing equipment only 2 Cooler lines require frac34 inch of flexible closed-cell nitrite rubber or an equivalent insulation 3 Freezer lines require 1-inch of flexible closed-cell nitrite rubber or an equivalent insulation 4 Insulation exposed to the outdoors must be protected from the weather (ie jacketed with a medium-gauge aluminum jacket)

Night Cover 1 Must install a cover on an existing open refrigerated display case to decrease its cooling load during off hours 2 The equipment manufacturer must not object to the use of night covers for the existing display case model 3 This rebate is based on the linear footage of the installed 4 The cover must be applied for a period of at least six hours

Strip Curtain on Walk-In CoolerFreezer 1 New strip curtains or plastic swinging doors must be installed on doorways of refrigerated spaces (conditioned to less than 50deg F) 2 Rebate is based on the linear footage of the doorway that the strip curtains are being installed in 3 Opening between the strip curtain and bottom of doorway must be no larger than 1 inch 4 Strips must have an overlay greater than 1 inch

Evaporator Coil Defrost Control 1The current system must include an operating electric defrost system with a functional electroshymechanical time clock 2 Evaporator coil temperature and pressure must be monitored by controller in order to determine optimal defrost cycles 3 New intelligent control systems to control the defrost systems will typically replace timed- defrost controls

Variable Speed Refrigeration Compressor This measure VSD control for refrigeration systems and its eligibility targets applies to retrofit construction in the commercial and industrial building sectors it is most applicable to grocery stores or food processing applications with refrigeration systems This protocol is for a VSD control system replacing a slide valve control system

Add Doors to Open Refrigerated Cases The eligible retrofit equipment is either no sweat doors or doors with anti-sweat heaters If a lighting retrofit is included with the new doors it must consume the same amount of energy or less energy than the old lighting Upgrades to lighting or other system components should be processed separately Horizontal cases are not eligible and should be processed as custom

Door Gaskets PECO Smart Ideas For Your Business CampI Program Application Manual

Q1 2017 pg 33

This measure is applicable to commercial refrigeration and applies to the replacement of worn-out gaskets with new better-fitting gaskets Applicable gaskets include those located on the doors of walk-in andor reach-in coolers and freezers This protocol applies to the main doors of both low temperature (ldquofreezerrdquo ndash below 32 degF) and medium temperature (ldquocoolerrdquo ndash above 32 degF) walk-ins

Zero Energy Doors For this measure a no-heatlow-heat clear glass door must be installed on an upright display case It is limited to door heights of 57 inches or more Doors must have either heat reflective treated glass be gas filled or both This measure applies to low temperature cases onlymdashthose with a case temperature below 0degF Doors must have 3 or more panes Total door rail glass and frame heater amperage ( 120 volt) cannot exceed 039413 amps per door for low temperature display cases Rebate is based on the door width (not including case frame)

Air Cooled Refrigeration Condenser Approach temperature lt8F for low temperature loads lt13F for medium temperature loads

Oversized Condenser with VFD New standalone condenser must no more than 150 larger than load

Case Light Occupancy Controls Acceptable for freezer or refrigerated cases as well as open cases or cases with doors

LED Open Case Lighting For replacing open case T8 or T12 fluorescent fixtures with DLC listed LEDs on refrigerators coolers and freezers

LED Enclosed Case Lighting Refrigerated LED case lighting with or without motion sensors on enclosed refrigerated vertical displays The baseline equipment is assumed to be cases with uncontrolled T8 or T12 linear fluorescent lamps

LED Enclosed Case Lighting Freezer LED case lighting with or without motion sensors on enclosed freezer vertical displays The baseline equipment is assumed to be cases with uncontrolled T8 or T12 linear fluorescent lamps

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 34

Refrigeration Measures Ref Measure

Measure Incentive Unit IncentiveUnit Code R01 Anti-Sweat Heater Controls Door $30

R02 Evaporator Fan Controls Controller $50

R03 Floating-head Pressure Controls HP $20

R04 Automatic Door Closers fo r Walk-in Coolers Door $75

R05 Automatic Door Closers fo r Walk-in Freezers Door $75

R06 Evaporator Fan EC Motor fo r Reach- in Cases Motor $35

RO Evaporator Fan EC Motor fo r Walk-in Cases Motor $50

R08 ENERGY STARreg Glass Door Freezer lt15 Cu Ft Unit $100

R09 ENERGY STARreg Glass Door Freezer 15- 49 Cu Ft Unit $125

R10 ENERGY STARreg Glass Door Freezer ~ 50 Cu Ft Unit $145

R11 ENERGY STARreg Solid Door Freezer Unit $75

R12 ENERGY STARreg Glass Door Refrigerator lt50 Cu Ft Unit $30

R13 ENERGY STARreg Glass Door Refrigerator gt= 50 Cu Ft Unit $50

K14 t NtKGY ~ I AKreg ~Olld Uoor Ketngerator $ OU Cu t-t Unit $~0

R15 Suction Pipe Insulation Walk-in Coolers Linear Foot $050

R16 Suction Pipe Insulation Walk in Freezers Linear Foot $075

R17 Night Cover Linear Foot $800

R18 Strip Curtains on Walk-in Cooler Linear Foot $250

R19 Evaporator Coil Defrost Control Controller $7500

R20 Variable Speed Refrigeration Compressor Compressor $85

R21 Add Doors to Open Refrigerated Cases Door $55

R22 Door Gaskets Door $250

R23 Zero Energy Doors Door $50

R24 A ir Cooled Refrigeration Condenser Ton $10

R25 Oversized Condenser with VFD Ton $10

R26 Case Light Occupancy Controls Door $8

R27 LED Open Cose Lighting Cose $10

R28 LED Enclosed Case Lighting Refrigerated Door $30

R30 LED Enclosed Case Lighting Freezer Door $30

Refrigeration Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 35

Food Service Beverage and Snack Machine Controls Incentives are offered for refrigerated vending machines that contain non-perishable bottled and canned beverages Controller for both types of systems must include a passive infrared occupancy sensor to turn off fluorescent lights and other energized machine systems when the surrounding area is unoccupied for 15 minutes or longer For the refrigerated machines the control logic may include periodic power up at 2-hour intervals or longer to maintain product temperature and provide compressor protection

ENERGY STARreg Refrigerated Beverage Vending Machines Incentives are offered for ENERGY STARreg beverage vending machines Qualifying machines can be found at httpswwwenergystargovproductsothervending_machines

ENERGY STARreg Electric Steam Cooker This measure applies to the installation of electric ENERGY STAR steam cookers as either a new item or replacement for an existing unit Gas steam cookers are not eligible The steam cookers must meet minimum ENERGY STAR efficiency requirements A qualifying steam cooker must meet a minimum cooking efficiency of 50 percent and meet idle energy rates specified by pan capacity

ENERGY STARreg Electric Combination Oven This measure applies to electric ovens capable of handling single 12 x 20 x 25 pan per rack

ENERGY STARreg Commercial Convection Oven The oven must meet or exceed heavy load potato cooking energy efficiency of greater than 70 utilizing ASTM Standard F149 Applies only to electric ovens

ENERGY STARreg Commercial Fryers The commercial fryer must have a tested heavy load (French fry for large vats) cooking energy efficiency of greater than 80 utilizing American Society for Testing and Materials (ASTM) Standard F1361 for commercial fryers and ASTM Standard F2144 for large vat fryers Multiple vat configurations are paid per qualifying vat ENERGY STAR maintains a list of qualifying products and specifications at httpwwwenergystargov

ENERGY STARreg Commercial Hot Holding Cabinet Energy STAR rating electric

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 36

Food Service amp Other Measures FoodOther

Measure Incentive Unit Incentive

Measure Code Unit

F01 Beverage Machine Controls Unit $25

F02 Snack Machine Controls Unit $20

F03 ENERGY STARreg Refrigerated Beverage Vending Machir Unit $125

F04 ENERGY STARreg Commerc ial Steam Cooker Unit $200

F05 ENERGY STARreg Electric Combination Oven Unit $200

F06 ENERGY STARreg Commercial Electric Convection Oven Unit $150

F07 ENERGY STARreg Commerc ial Fryers Unit $100

F08 ENERGY STARregCommerc ial Hot Holding Cabinet Unit $200

Food Service Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 37

Motors and Variable Frequency DrivesEarly Replacement Motors For constant speed and uniformly loaded motors this measure applies to the replacement of old motors with new energy efficient motors of the same rated horsepower Old motors must be less than 15 years Replacements where the old motor and new motor have different horsepower ratings are considered custom measures Motors with variable speeds variable loading or industrial-specific applications are also considered custom measures

Motors Incentive Table Motors

Measure Code

HP Incentive per Motor

M01 15 - 10 $40 M02 11 - 50 $100 M03 51-100 $150 M04 gt100 $300

Only VFDs on unitary systems are eligible Non-unitary systems must be submitted as a custom measure Soft start motors are not eligible

Variable Frequency Drives on HVAC Fan Applications Incentives are offered for installing VFDs on existing HVAC fans that do not have pre-existing VFDs This measure applies to HVAC supply and return fans only All other fans including cooling tower fans must be submitted as custom measures Manually fixed speed settings on HVAC fans must be submitted via custom application The VFD must control motor speed automatically in response to pressure flow temperature or other variable signal The installation of a VSD must accompany the permanent removal or disabling of any throttling devices such as inlet vanes bypass dampers and throttling valves etc The incentive is offered per controlled HP

Variable Frequency Drives on Pump Applications Incentives are offered for installing VFDs on existing chilled water pumps and heating hot water pumps that do not have existing VFDs This measure applies to chilled water pumps and heating hot water pumps only All other pumps must be submitted as custom measures Manually fixed speed settings on pumps must be submitted via custom application The VFD must control motor speed automatically in response to pressure flow temperature or other variable signal The installation of a VSD must accompany the permanent removal or disabling of any throttling devices such as throttling valves The incentive is offered per controlled HP

Variable Speed Control for Kitchen Exhaust Hoods The measure consists of installing a new VSD in conjunction with a sensor control system that varies the exhaust rate of kitchen ventilation (exhaust andor makeup air fans) based on the heat and effluent output from the cooking appliances (ie the more heat and smokevapors generated the more ventilation needed) This involves installing a temperature sensor in the hood exhaust collar andor an optic sensor on the end of the hood that senses cooking conditions and allows the system to automatically vary the rate of exhaust to match requirements by adjusting the fan speed accordingly

Variable Speed Drives for Process or Other Equipment VFD must be used in conjunction with a process (non HVAC) application To qualify for this incentive the driven equipment must operate at least 2000 hours per year Redundant or back- up units do not qualify VFDs replacing existing VFDs do not qualify The VFD must control motor

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 38

speed automatically in response to pressure flow temperature or other variable signal VFDs installed as ldquosoft startrdquo without automatic manual closed loop speed control do not qualify The installation of a VFD must accompany the permanent removal or disabling of any throttling devices such as throttling valves The incentive is per controlled HP and only applies to controlled motors less than 50 HP

VSDVFD Incentives Table VFD

Measure Code

Measure Unit Incentive per Unit

Fan Application

V01 VFD on HVAC Fan HP $25 Pump Application

Variable Speed Control for Kitchen Exhaust Hoods

Variable Speed Drives for Process or Other Equipment

V02 VFD on Chilled Water Pumps HP $25 V03 VFD on Heating Hot Water Pumps HP $25

V04 Kitchen Exhaust Fan Retrofit Hood HP $500

V05 Process Motor lt 50 HP HP $50

Domestic Hot Water Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater This measure documents the energy savings attributed to converting from a standard electric water heater to an ENERGY STAR natural gaspropane-fired water heater or a standard oil-fired water heater with an Energy Factor of 0585

Heat Pump Water Heater This includes heat pump water heaters with energy factors meeting ENERGY STAR criteria The measure described here involves a direct retrofit of a resistive electric water heater with a heat pump water heater It does not cover systems where the heat pump is a pre-heater or is combined with other water heating sources More complicated installations can be treated as custom projects

Low Flow Pre-Rinse Spray Valve This measure applies to efficient low flow pre-rinse sprayers in grocery and food service applications The most likely areas of application are kitchens in restaurants and hotels Only premises with electric water heating may qualify for this incentive In addition the replacement pre-rinse spray nozzle must use less than 16 gallons per minute with a cleanability performance of 26 seconds per plate or less Low flow pre-rinse sprayers reduce hot water usage and save energy associated with water heating

Domestic Hot Water Incentive Table

Measure Code Measure Unit Retrofit Incentive per

Unit

W01 Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater Unit $100

W02 Heat Pump Water Heater Unit $100 W03 Low-Flow Pre-Rinse Spray Valve Valve $17

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 39

Compressed Air SystemsNo-loss Condensate Drain No-loss Condensate Drains are controlled by a sensor that monitors the level of condensate and only open when there is a need to drain condensate They close before compressed air is allowed to escape This measure is targeted to non-residential customers whose equipment is a timed drain that operates on a pre-set schedule Acceptable baseline conditions are compressed air systems with standard condensate drains operated by a solenoid and timer

Air-Entraining air nozzle This measure is targeted to non-residential customers whose compressed air equipment uses stationary air nozzles in a production application with an open copper tube of 18rdquo or 14rdquo orifice diameter Energy efficient conditions require replacement of an inefficient non-air entraining air nozzle with an energy efficient air-entraining air nozzle that use less than 15 CFM at 100 psi for industrial applications

Storage Tanks for LoadNo Load Screw Compressors This measure protocol applies to the installation of air receivers with pressureflow controls to loadno load compressors Loadno load compressors unload when there is low demand The process of unloading is done over a period of time to avoid foaming of the lubrication oil Using a storage tank with pressureflow control will buffer the air demands on the compressor Reducing the number of cycles in turn reduces the number of transition times from load to no load and saves energy The baseline equipment is a loadno load compressor with a 1 galcfm storage ratio or a modulating compressor with blowdown The high efficiency equipment is a loadno load compressor with a minimum storage ratio of 4 gallons of storage per cfm

Cycling Refrigerated Thermal Mass Dryer When air is compressed water vapor in the air condenses and collects in liquid form Some of this condensate collects in the air distribution system and can contaminate downstream components such as air tools with rust oil and pipe debris Refrigerated air dryers remove the water vapor by cooling the air to its dew point and separating the condensate Changes in production and seasonal variations in ambient air temperature lead to partial loading conditions on the dryer Standard air dryers use a hot gas bypass system that is inefficient at partial loads A Cycling Thermal Mass Dryer uses a thermal storage medium to store cooling capacity when the system is operated at partial loads allowing the dryer refrigerant compressor to cycle

This measure is targeted to non-residential customers whose equipment is a non-cycling refrigerated air dryer with a capacity of 600 cfm or below Acceptable baseline conditions are a non-cycling (eg continuous) air dryer with a capacity of 600 cfm or below The replacement of desiccant deliquescent heat-of-compression membrane or other types of dryers does not qualify under this measure

Variable Speed Air Compressor This type of compressor uses a special drive to control the speed (RPM) of the unit which in turn saves energy compared to a fixed speed equivalent

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 40

No-loss Condensate Drain Air-Entraining Air Nozzle Cycling Refrigerated Thermal Mass Dryer

Compressor Incentive per

Equipment Type Units Quantity Daily Operating Unit

Hours

CA04 Storage Tanks for LoadNo Load Screw

Compressor HP $10 Compressors

CA05 Variable Speed Air Compressor

Compressor HP $30

CA06 Compressed Air System Optimization

Compressor HP $50

Compressed Air System Optimization The submitted optimization measures must be identified in an Air System Audit or equivalent study to be eligible The measures must demonstrate energy savings as evaluated by a Program Engineer Additionally measures must also fall under one or more of the category below to be eligible

1) Install storage Receivers (new receivers only replacing existing storage receivers are ineligible)

2) Compressor control (must demonstrate improvement in partial load efficiency of the compress air system including reduceeliminate partially loaded units)

3) Dryer control 4) Source pressure reduction 5) Right-sizing distribution components such as piping filters regulators

connectors and hoses (routine maintenance replacements are ineligible) 6) Leakage detection and repair 7) Eliminate low-efficiency end-usages of compressed air 8) Heat recovery (most reduce electricity consumption of the replaced heat source)

Compressed Air Systems Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 41

lt65000 Btuh

~ 65000 Btuh and lt135000 Btuh

135000 Btuhand lt240000 Btuh

240000 Btuh and lt760000 Btuh

760000 Btuh

154

142

135

125

123

Chiller Capacity Path APath B efficiency (kWton )

lt 150 tons

~150 tons and lt300 tons

300 tons and lt400 tons

400 tons and lt600 tons

600 tons

lt75 tons

~75 tons and lt150 tons

~150 tons and lt300 tons

~300 tons and lt600 tons

600 tons

0610 FU0695 FL and 0550 IPLV0440 IPLV

0610 FU0635 FL and 0550 IPLV0400 IPLV

0560 FU0595 FL and 0520 IPLV0390 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

Path APath B efficiency (kWton )

0750 FU0780 FL and 0600 IPLV0500 IPLV

0720 FU0750 FL and 0560 IPLV0490 IPLV

0660 FU0680 FL and 0540 IPLV0440 IPLV

0610 FU0625 FL and 0520 IPLV0410 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

Data Centers Data Center incentives are available for facilities ranging in size from office server closets to large standalone facilities

Air Cooled Chiller Path APath B EER (BtuWh) lt150 tons 101 FL97 FL and 137 IPLV158 IPLV ge150 tons 101 FL97 FL and 140 IPLV161 IPLV

Air Cooled Chiller without Condenser Air-cooled chillers without condenser must be rated with matching condensers and comply with air-cooled chiller efficiency requirements

Computer Room Air Conditioner

Computer Room Air Handler Variable Speed Replacing constant speed CRAH with VSD CRAH

Water Cooled Centrifugal Chiller

Water Cooled Positive Displacement or Reciprocating Chiller

Uninterruptible Power Supply Must be Energy Star Certified UPS or have full load efficiency rating

ge948 for 20-100 kVA ge978for ge100 kVA

Mainframe Refresh The rated efficiency of the replacement Mainframes power supply must be at least 8 more

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 42

- Equipment Type Units IncentiveUnit

D1 Air Cooled Chiller Ton $4000 D2 Air Cooled Chiller W ithout Condenser Ton $2000 D3 Computer Room Air Conditioner Ton $3000 D4 Computer Room Air Handler Variable Speed Ton $1000 D5 Water Cooled Centrifugal Chiller Ton $3000 D6 Water Cooled Positive Displacement or Reciprocatin $3000 D7 Uninterruptible Power Supply 20-100 kVA $1000 D8 Uninterruptible Power Supply gt 100 kVA $1000 D9 Mainframe Refresh $2000

D10 Server Refresh $2000 D11 PC Power Managment System $600 D12 HVAC System Optimization $005 D1 3 HoUCold Aisle Containment kWh saved $005 D14 Server Virtualization kW reduction $40000 D1 5 Thin Clients Units $500

efficient compared to the existing Mainframes power supply The replacement Mainframe if Inactive must be decommissioned and removed from the Data Center

Server Refresh Replacement servers must be ENERGY STARreg certified Replacement servers power supply must be 5 more efficiency compared to the power supply of the replaced servers The replaced server must be decommissioned and removed from the data center

HVAC System Optimization Final system must have these features

-Implementation of free cooling by the addition of an economizer system -Conversion of constant speed CRACCRAH into variable speed operations using VFDs and additional control functionalities and -Elevation of exhaust air temperature

HotCold Aisle Containment Includes both Hot and Cold Aisles Installing new containment measures not replacing already existed aisle containment Plenum-only installations not eligible Must result in higher difference between the return air (hot aisle) and supply air (cold aisle) temperatures measured at rack intake and exhaust locations

Server Virtualization Minimum of consolidating 5 Servers virtualized into one Server The virtualized servers if inactive are removed from the Data Center

Thin Clients Must be ENERGY STAR certified thin clients Decommissioned clients are removed from the Data Center

Data Center Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 43

Whole Building Systems Whole Building Systems Approach

The Whole Building Systems approach is intended to encourage integrated energy efficient designs by providing enhanced incentives to the customer who addresses overall energy performance Owners of eligible and qualifying new construction and major renovation projects can receive Whole Building Systems incentives when energy modeling indicates the projectrsquos performance is over 10 better than the ASHRAE 901-2007 Savings from eligible electric end-uses in kilowatt hours define the amount of financial incentive Energy savings achieved through renewable energy sources are not counted toward project energy savings and are not included in the savings basis Incentive reservations obtained during the design phase of a project will be honored for up to 24 months

How to Apply for Whole Building Systems Incentives Before construction begins bull A Pre-notification Application must be submitted documenting the Owners intention to

seek Whole Building Systems incentives bull The Owner must confirm the goals and energy efficiency strategies being pursued by the

design team on the completed Pre-notification Worksheet (Checklist tab) and in the project Summary (Whole Building Performance Summary tab)

bull Submit executable building modeling software files bull Submit the Whole Building Performance Summary worksheet energy simulation model

inputs and outputs and supporting documentation bull Receive confirmation and eligibility notification from the PECO Smart Ideas team and

receive an incentive reservation bull The final incentive paid may differ from the reserved incentive amount The final

incentive will be calculated based on site-verified equipment installation and performance The Owners final application and complete documentation must be received within 6 months of equipment installation or certificate of occupancy whichever is later

bull An executable energy model and model output demonstrating compliance with the criteria of ASHRAE 901-2007 Appendix G will be required and the equipment data sheets LED lighting fixtures must be on the DLC or Energy STAR qualified products list (QPL) to be eligible LED fixtures not on the DLC or Energy STAR QPL has the option of submitting LM79 and LM80 test reports for evaluation against DLC and Energy STAR eligibility criteria

During the construction period bull Owner and design team continue to work closely with their chosen contractor to assure

energy efficiency measures are included and installed in the completed building

When the building is constructed and operational bull Complete the Owner final application Request an equipment verification site visit by the

PECO Smart Ideas team Equipment must be installed and fully operational o Program staff will schedule a site visit and utilize submitted documentation and

measurement tools to verify that the installation follows the submitted energy simulation model

bull When PECO confirms that there are no significant changes to the installed equipment payment of the reserved incentive will be made to the Owner within 6 weeks

bull If changes from the proposed design energy simulation are found the Owner and design team will be notified of the reduced incentive amount a period of 20 calendar days will

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 44

Improvement Incentive per Sq Ft

over Code

~11 to lt20 $0155

~20 to lt30 $0233

~30 to lt40 $0350

~40 to lt60 $0525

~60 $0700

be allowed for supplemental information to be provided if no additional information is received by PECO Smart Ideas team the reduced incentive payments will be made and sent to the Owner if additional clarification and information is available program staff will work diligently to resolve the discrepancies and arrive at a reasonable incentive adjustment with the customer

Payments made by PECO Smart Ideas are final

Customer Eligibility The Owner of the proposed new building project must be a customer of PECO and receive delivery of electric service from PECO to receive kilowatt-hour based incentives Please note that electricity supply can be provided by any vendor

Project Eligibility bull The project must be a new construction or major renovation Major renovations involving

the removal and redesign of at least two building systems (such as interior lighting and mechanical systems) may apply for Whole Building Systems incentives

bull To qualify for incentives projects must demonstrate energy efficiency enhancements that achieve at least 11 improvement in the proposed design versus the standard baseline

bull The Owner must submit a Pre-approval Application to the program at the stage where changes for increased energy efficiency are still feasible and construction has not been completed

bull Projects receiving Whole Building Systems incentives are not eligible to receive other incentives such as the prescriptive or custom program incentives for the same scope

bull Project components that are NOT eligible for consideration as a basis for PECO Smart Ideas include the following o Alternative fuel sources (eg use of gas or oil equipment in lieu of electric) Please note

that combined heat and power (CHP) systems will be incentivized for the electricity they produce

o Renewable energy sources (eg solar wind biomass) bull Ineligible savings include exterior lighting process receptacle miscellaneous loads and

other unregulated end-uses Custom incentives are available for new construction exterior lighting

Whole Building Systems Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 45

Custom Project Specifications Instructions for Energy Savings Calculations for Custom Projects Custom projects must involve measures that result in a reduction in electric energy use (kWh) Electricity savings may result from either efficiency improvements or fuel switching Custom Incentives are based on the first year kilowatt-hour savings Custom applications must be accompanied by detailed engineering calculations that document the annual total energy savings

The following serve as guidelines for the minimum required documentation

Equipment Information Submittals bull A list of the present and proposed equipment and components to be installed

including manufacturerrsquos catalogmodel number bull Manufacturerrsquos specification sheets showing capacities and performance for all major

components

Energy Savings Calculations Provide calculations documenting the predicted energy consumption of the existing (or baseline) and proposed system using appropriate analytical tools and clearly stated assumptions Calculations may be performed by ldquohandrdquo but spreadsheet analysis or more rigorous modeling is preferred All analysis should be provided in electronic format All assumptions such as operating hours existing and proposed equipment operational details must be presented Engineering algorithms and procedures from recognized technical organizations such as ASHRAE SMACNA ANSI etc must be used Use rated performance factors tested under accepted procedures specified by recognized rating agencies such as AHRI ANSI ASTM etc Provide an explanation when equipment performance rating conditions vary from standard conditions

In support of the calculations extensive documentation must be provided that provides the basis for the savings estimates The documentation must provide information on the equipment operating schedule daily and seasonal load profile and baseline AND energy efficient equipment performance at the operating loads Typical documentation for custom projects often includes bull Engineering or architectural drawings and ldquoequipment schedulerdquo sheets bull Component specification sheets that include part load efficiency or performance

factors bull Spreadsheet calculations or inputoutput files and results from system modeling or

other engineering analysis using accepted engineering algorithms and practices bull Log sheets trend logs from a building management system or other operating

documentation that are often necessary to document operating hours and equipment loading and used as a basis for the calculations (in some cases short term monitoring may be required to document the load profile)

bull Control sequence of operations that are necessary where controls play a part in the savings equation

Additional documentation other than that described in the application may be required for program participation Larger projects may also require pre- and post-project sub metering or monitoring of loads andor power input as part of another measurement and verification activity to demonstrate the actual energy savings that are realized

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 46

Baseline for Custom Analysis Where equipment is replaced prior to the end of its rated service life in order to achieve energy savings the existing equipment performance may be used as the baseline in the energy savings calculations Where equipment is replaced due to failure or for other reasons (such as obsolescence or a need for more capacity) the baseline performance used in the savings calculation should be either the minimum performance that would be required by code for that equipment type and application (where a code applies) or the performance of the equipment that would have been selected as the customers standard practice when a code does not apply

Baseline or Existing System Summary On custom worksheet on application form include make model number name plate information (such as operating voltage and rated full load amps) rated capacity quantities equipment condition and age facility operating hours equipment operating schedule and load curves If needed attach separate sheets

All decisions regarding incentives for custom projects are in the sole discretion of PECO

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 47

APPENDIX PROGRAM UPDATES SUMMARY (Q1 2017) Multifamily Nursing Home and Assisted Living retrofit customers need to apply for incentives through the PECO Smart Ideas Multi-Family Program administered by Franklin Energy For more information please contact Taylor Adler at tadlerfranklinenergycom or call 1-844-4BIZ-SAVE Multifamily Nursing Home and Assisted Living new construction customers can proceed with applying for incentives here

Revised Incentives

Data Centers

Measure Incentive Effective Immediately Previous Incentive

Air-cooled chiller for data centers $40ton $10ton Air-cooled chiller without condenser for data centers $20ton $10ton

Computer room air conditioner $30ton $7ton Water-cooled centrifugal chiller for data centers $30ton $5ton Water-cooled positive displacement or reciprocating chiller for data centers

$30ton $5ton

Uninterruptible power supply 20-100 kVA $10kVA $6kVA Uninterruptible power supply gt100 kVA $10kVA $1kVA Mainframe refresh $20kW installed $5kW installed Server refresh $20kW installed $4kW installed Server virtualization $400kW reduction $4kW reduction Thin clients $5units $4units

Lighting (Effective Immediately)

Measure Incentive Effective Immediately Specification Previous

Incentive Specification

New construction exterior LED outdoor flood light LED parking garage and canopy lighting LED polearm mounted parking and roadway lighting LED wall mount fixture

$005kWh (custom)

Lighting Power Density (LPD) Requirements Unchanged

$10-54 fixture

Lighting Power Density (LPD) (Wft2) by Space Type or Building Area

LED Replacement Lamps (Tubes) 2

$250lamp 5 Min Watts Reduced

$250lamp 6 Min Watts Reduced

LED Replacement Lamps (Tubes) 4

$400lamp 10 Min Watts Reduced

$400lamp 12 Min Watts Reduced

Permanent Fixture Removal $010Watt removed

Clarification of calculation to represent actual Wattage removed

$010Watt removed

Lighting (Effective 6117)

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 48

Measure Incentive Effective 6117 Specification Previous

Incentive Previous Specification

Interior LED high-bay fixtures andor retrofit kits if lt 20000 LED Lumens

$50fixture 150 Min Watts Reduced

$75fixture 150 Min Watts Reduced

Interior LED high-bay fixtures andor retrofit kits if gt 20000 LED Lumens

$75fixture 225 Min Watts Reduced

$75fixture 150 Min Watts Reduced

New Incentives

Compressed Air

Measure New Incentive Effective Immediately Variable speed air compressor $30compressor HP Compressed air system optimization $50compressor HP

HVAC

Measure New Incentive Effective Immediately ECM circulation pump $50pump Retro-commissioning cooling systems $750ton Retro-commissioning whole building $010square foot Energy management system $25ton Demand controlled ventilation $25ton Water-cooled air conditioner $22ton

Food Service

Measure New Incentive Effective Immediately Combination oven $200unit ENERGY STARreg commercial convection oven $150unit ENERGY STARreg commercial fryers $100unit ENERGY STARreg commercial hot holding cabinet $200unit

Refrigeration

Measure New Incentive Effective Immediately Air-cooled refrigeration condenser $10ton Oversized condenser with VFD $10ton Case light occupancy controls $750door

Lighting

Measure New Incentive Effective Immediately Interior central lighting controls $00175sq foot

Motors and Drives

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 49

-

Measure New Incentive Effective Immediately VFD for dust collection system motor $50HP

Application Clarifications and Revised Requirements

Clarification of LED Eligibility for New Construction or Retrofit Projects

LED Eligibility is determined by whether lighting products are listed in either the DesignLights Consortium (DLC) Qualified Products List of commercial-grade LED luminaires or the US Environmental Protection Agency database of ENERGY STAR certified products For products not yet listed contractors may submit LM79 and LM80 test reports PECO Smart Ideas engineers will review test reports to determine if the product in question meets performance specifications

Revised W 9 Requirement

W-9 forms EIN numbers are no longer required

Deletion of erroneous statement in New Construction Lighting

The following statement from previous Business Manual has been deleted ldquoThe minimum lighting power density used to calculate the incentive shall be no lower than 50 of the ASHRAE 901-2007 valuerdquo

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 50

  • Commercial amp Industrial Program Application Manual
    • Follow This Easy Process
      • Pre-Approval Application Checklist
      • Final Application Checklist
          • Terms and Conditions
            • Program Effective Dates
            • Program and Project Eligibility
            • Incentive Payment Limits
            • Application Review Process
            • Inspections andor PUCrsquos Statewide Program Evaluation
            • Requirements for Custom Project Electricity Savings Calculation
            • Tax Liability
            • No Endorsement
            • Warranties
            • Limitation of Liability
            • Assignment
            • Customerrsquos Certification
            • Termination
            • Acknowledgement
              • Retrofit Lighting Solutions
                • General Linear Fluorescent Lamp and Ballast Specification Requirements
                • LED Lamps and Fixtures
                • Minimum Watts Reduced
                • Linear LED (Tubes)
                • Permanent Fixture Removal
                  • LED Traffic Signals
                    • LED Traffic Signals Incentive Table
                      • New Construction Lighting Specifications
                        • New Construction Lighting Incentives Table
                          • New Construction Lighting Power Density Code
                              • Exterior New Construction Lighting
                              • HVAC Equipment
                                • Air-Source Air Conditioners and Air-Source Heat Pumps
                                • Package Terminal Systems (Replacements)
                                • Ductless Mini-Split Heat Pump lt54 Tons
                                • Geothermal Heat Pump
                                  • Other HVAC Equipment
                                    • Hotel Guest Room Occupancy Sensor
                                    • ECM Circulation Fan
                                    • ECM Circulation Pump
                                    • Retrocomissioning Cooling Systems
                                    • Retrocomissioning Whole Building
                                    • Energy Management System
                                    • Demand Controlled Ventilation
                                    • Other HVAC Incentives Table
                                      • Unitary HVAC Chillers
                                        • Air-Cooled Chillers Water Cooled Positive Displacement Reciprocating Chillers and Water Cooled Centrifugal Chillers
                                          • Refrigeration
                                            • Anti-Sweat Heater Controls
                                            • Evaporator Fan Controls
                                            • Floating Head Pressure Controls
                                            • Automatic Door Closers for Walk-In Coolers and Freezers
                                            • EC Motor for Walk-inReach-in Refrigerated cases or Freezer cases
                                            • ENERGY STAR Solid Door Freezer and Glass Door Freezer and Refrigerators
                                            • Refrigeration Suction Pipe Insulation
                                            • Night Cover
                                            • Strip Curtain on Walk-In CoolerFreezer
                                            • Evaporator Coil Defrost Control
                                            • Variable Speed Refrigeration Compressor
                                            • Add Doors to Open Refrigerated Cases
                                            • Door Gaskets
                                            • Zero Energy Doors
                                            • Air Cooled Refrigeration Condenser
                                            • Oversized Condenser with VFD
                                            • Case Light Occupancy Controls
                                            • LED Open Case Lighting
                                            • LED Enclosed Case Lighting Refrigerated
                                            • LED Enclosed Case Lighting Freezer
                                              • Food Service
                                                • Beverage and Snack Machine Controls
                                                • ENERGY STARreg Refrigerated Beverage Vending Machines
                                                • ENERGY STARreg Electric Steam Cooker
                                                • ENERGY STARreg Electric Combination Oven
                                                • ENERGY STARreg Commercial Convection Oven
                                                • ENERGY STARreg Commercial Fryers
                                                • ENERGY STARreg Commercial Hot Holding Cabinet
                                                  • Motors and Variable Frequency Drives
                                                    • Early Replacement Motors
                                                    • Variable Frequency Drives on HVAC Fan Applications
                                                    • Variable Frequency Drives on Pump Applications
                                                    • Variable Speed Control for Kitchen Exhaust Hoods
                                                    • Variable Speed Drives for Process or Other Equipment
                                                      • Domestic Hot Water
                                                        • Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater
                                                        • Heat Pump Water Heater
                                                        • Low Flow Pre-Rinse Spray Valve
                                                        • Domestic Hot Water Incentive Table
                                                          • Compressed Air Systems
                                                            • No-loss Condensate Drain
                                                            • Air-Entraining air nozzle
                                                            • Storage Tanks for LoadNo Load Screw Compressors
                                                            • Cycling Refrigerated Thermal Mass Dryer
                                                            • Variable Speed Air Compressor
                                                            • Compressed Air System Optimization
                                                            • Compressed Air Systems Incentive Table
                                                              • Data Centers
                                                                • Air Cooled Chiller
                                                                • Air Cooled Chiller without Condenser
                                                                • Computer Room Air Conditioner
                                                                • Computer Room Air Handler Variable Speed
                                                                  • Replacing constant speed CRAH with VSD CRAH
                                                                    • Water Cooled Centrifugal Chiller
                                                                    • Water Cooled Positive Displacement or Reciprocating Chiller
                                                                    • Uninterruptible Power Supply
                                                                    • Mainframe Refresh
                                                                    • Server Refresh
                                                                      • Whole Building Systems
                                                                        • Whole Building Systems Approach
                                                                        • How to Apply for Whole Building Systems Incentives
                                                                        • Customer Eligibility
                                                                        • Project Eligibility
                                                                        • Whole Building Systems Incentives Table
                                                                          • Custom Project Specifications
                                                                            • Instructions for Energy Savings Calculations for Custom Projects
                                                                            • Equipment Information Submittals
                                                                            • Energy Savings Calculations
                                                                            • Baseline for Custom Analysis
                                                                            • Baseline or Existing System Summary

Unitary HVAC Chillers

Air-Cooled Chillers Water Cooled Positive Displacement Reciprocating Chillers and Water Cooled Centrifugal Chillers Chiller applications including existing multiple chiller configurations (including redundant or lsquostand-byrsquo chillers) existing chillers serving multiple load groups and chillers in industrial applications are defined as non-standard applications and must follow a site-specific custom protocol $005kWh) rate

Incentives are offered for chillers with an IPLV value (expressed in kW per ton) that is less than or equal to the qualifying efficiency shown in the table below The chiller efficiency rating must be based on ARI Standard 550590-2003 for IPLV conditions The chillers must meet ARI standards 550590-2003 be UL listed and use a minimum ozone-depleting refrigerant (eg HCFC or HFC) The ARI net capacity value should be used to determine the chiller tons A manufacturerrsquos specification sheet with the rated kWton-IPLV or COP-IPLV must accompany the application along with the four point performance data that is the basis for the IPLV The application must include a certification that the chiller is appropriately sized for site design load conditions

Chillers must satisfy efficiency requirements for both full load and IPLV efficiencies for either Path A or Path B The table shows the minimum efficiency ratings to qualify for the prescriptive incentive which must be consistent with the expected operating conditions of the efficient chiller For example if the efficient chiller satisfies Path A and generally performs at part load the appropriate baseline chiller efficiency is the IPLV value under Path A If the efficient chiller satisfies Path B and generally performs at full load the appropriate baseline chiller efficiency is the full load value under Path B Generally chillers operating above 70 percent load for a majority (50 or more) of operating hours should use Path A and chillers below 70 load for the majority of operating hours should use Path B

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 30

C3 lt 75 tons

C4 75 tons and lt 150 tons

cs ~ 150 tons and lt 300 tons C6 ~ 300 tons

Water Cooled Centrifugal Chillers C7 lt 300 tons CB ~ 300 tons and lt 600 tons

C9 ~ 600 tons

Path A

Qualifying Full Load Efficiency

Qualifying IPLV Efficiency

Path B

Qualifying Full Load Efficiency

Qualifying IPLV Efficiency

0780 kWton 0567 kWton 0800 kWton 0540 kWton

0775 kWton 0554 kWton 0790 kWton 0527 kWton

0680 kWton 0522 kWton 0718 kWton 0486 kWton 0620 kWton 0486 kWton 0639 kWton 0441 kWton

0634 kWton 0536 kWton 0639 kWton 0405 kWton 0576 kWton 0494 kWton 0600 kWton 0360 kWton

0570 kWton 0494 kWton 0590 kWton 0360 kWton

I

Incentive ($ton)

$17

$17

Unitary Chiller Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 31

Refrigeration

Anti-Sweat Heater Controls Incentives are offered for devices that sense the relative humidity in the air outside of the display case and cycles or turns off the glass door (if applicable) and frame anti-sweat heaters when the ambient dew point is below a preset set point Technologies that can turn off anti-sweat heaters based on sensing condensation (on the inner glass pane) also qualify Incentive is based on the number of doors

Evaporator Fan Controls This measure is for the installation of controls in medium temperature walk-in coolers The controller reduces airflow of the evaporator fans when there is no refrigerant flow The measure must control a minimum of 120 HP where fans operate continuously at full speed The measure also must reduce fan motor power by at least 75 during the off cycle This measure is not applicable if any of the following conditions apply 1) Compressor runs all the time with high duty cycle 2) Evaporator fan does not run at full speed all the time 3) Evaporator fan motor runs on poly-phase power 4) Evaporator fan motor is not shaded-pole or permanent split capacitor (PSC) 5) Evaporator fan does not use off-cycle or time-off defrost

Floating Head Pressure Controls Controls must vary head pressure to adjust condensing temperatures in relation to outdoor air temperature Must replace existing constant pressure or manually controlled systems to achieve reduced head pressure in order to maintain a minimum saturated condensing temperature of 70 degF or a 20 degF variance below design heat pressure during mild weather conditions Compressor size must be at least 5 HP

Automatic Door Closers for Walk-In Coolers and Freezers The auto-closer should be applied to the main insulated opaque door(s) of a walk-in cooler or freezer The auto-closer must be able to firmly close that door when it is within one inch of full closure This must be a newly installed automatic door closer replacements on previously installed door closers are not eligible for an incentive

EC Motor for Walk-inReach-in Refrigerated cases or Freezer cases Incentives are offered for replacement of an existing standard-efficiency shaded-pole or permanent split capacitor evaporator fan motor in refrigerated display cases or fan coil in walk-ins The replacement unit must be an Electronically Commutated Motor (ECM) This measure cannot be used in conjunction with the Evaporator Fan Controller measure

ENERGY STAR Solid Door Freezer and Glass Door Freezer and Refrigerators Incentives are offered for replacement of existing self-contained refrigerators and freezers with units that are ENERGY STARreg listed Only units with built-in refrigeration systems are qualified Units with remote refrigeration systems or units do not qualify Customers must provide proof that the appliance meets the CEE or ENERGY STAR efficiency specifications using ASHRAE Standard 72-2005 (38degF plusmn 2degF) Incentive is per unit

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 32

Refrigeration Suction Pipe Insulation 1 Must insulate bare refrigeration suction lines of 1 58 inches in diameter or less on existing equipment only 2 Cooler lines require frac34 inch of flexible closed-cell nitrite rubber or an equivalent insulation 3 Freezer lines require 1-inch of flexible closed-cell nitrite rubber or an equivalent insulation 4 Insulation exposed to the outdoors must be protected from the weather (ie jacketed with a medium-gauge aluminum jacket)

Night Cover 1 Must install a cover on an existing open refrigerated display case to decrease its cooling load during off hours 2 The equipment manufacturer must not object to the use of night covers for the existing display case model 3 This rebate is based on the linear footage of the installed 4 The cover must be applied for a period of at least six hours

Strip Curtain on Walk-In CoolerFreezer 1 New strip curtains or plastic swinging doors must be installed on doorways of refrigerated spaces (conditioned to less than 50deg F) 2 Rebate is based on the linear footage of the doorway that the strip curtains are being installed in 3 Opening between the strip curtain and bottom of doorway must be no larger than 1 inch 4 Strips must have an overlay greater than 1 inch

Evaporator Coil Defrost Control 1The current system must include an operating electric defrost system with a functional electroshymechanical time clock 2 Evaporator coil temperature and pressure must be monitored by controller in order to determine optimal defrost cycles 3 New intelligent control systems to control the defrost systems will typically replace timed- defrost controls

Variable Speed Refrigeration Compressor This measure VSD control for refrigeration systems and its eligibility targets applies to retrofit construction in the commercial and industrial building sectors it is most applicable to grocery stores or food processing applications with refrigeration systems This protocol is for a VSD control system replacing a slide valve control system

Add Doors to Open Refrigerated Cases The eligible retrofit equipment is either no sweat doors or doors with anti-sweat heaters If a lighting retrofit is included with the new doors it must consume the same amount of energy or less energy than the old lighting Upgrades to lighting or other system components should be processed separately Horizontal cases are not eligible and should be processed as custom

Door Gaskets PECO Smart Ideas For Your Business CampI Program Application Manual

Q1 2017 pg 33

This measure is applicable to commercial refrigeration and applies to the replacement of worn-out gaskets with new better-fitting gaskets Applicable gaskets include those located on the doors of walk-in andor reach-in coolers and freezers This protocol applies to the main doors of both low temperature (ldquofreezerrdquo ndash below 32 degF) and medium temperature (ldquocoolerrdquo ndash above 32 degF) walk-ins

Zero Energy Doors For this measure a no-heatlow-heat clear glass door must be installed on an upright display case It is limited to door heights of 57 inches or more Doors must have either heat reflective treated glass be gas filled or both This measure applies to low temperature cases onlymdashthose with a case temperature below 0degF Doors must have 3 or more panes Total door rail glass and frame heater amperage ( 120 volt) cannot exceed 039413 amps per door for low temperature display cases Rebate is based on the door width (not including case frame)

Air Cooled Refrigeration Condenser Approach temperature lt8F for low temperature loads lt13F for medium temperature loads

Oversized Condenser with VFD New standalone condenser must no more than 150 larger than load

Case Light Occupancy Controls Acceptable for freezer or refrigerated cases as well as open cases or cases with doors

LED Open Case Lighting For replacing open case T8 or T12 fluorescent fixtures with DLC listed LEDs on refrigerators coolers and freezers

LED Enclosed Case Lighting Refrigerated LED case lighting with or without motion sensors on enclosed refrigerated vertical displays The baseline equipment is assumed to be cases with uncontrolled T8 or T12 linear fluorescent lamps

LED Enclosed Case Lighting Freezer LED case lighting with or without motion sensors on enclosed freezer vertical displays The baseline equipment is assumed to be cases with uncontrolled T8 or T12 linear fluorescent lamps

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 34

Refrigeration Measures Ref Measure

Measure Incentive Unit IncentiveUnit Code R01 Anti-Sweat Heater Controls Door $30

R02 Evaporator Fan Controls Controller $50

R03 Floating-head Pressure Controls HP $20

R04 Automatic Door Closers fo r Walk-in Coolers Door $75

R05 Automatic Door Closers fo r Walk-in Freezers Door $75

R06 Evaporator Fan EC Motor fo r Reach- in Cases Motor $35

RO Evaporator Fan EC Motor fo r Walk-in Cases Motor $50

R08 ENERGY STARreg Glass Door Freezer lt15 Cu Ft Unit $100

R09 ENERGY STARreg Glass Door Freezer 15- 49 Cu Ft Unit $125

R10 ENERGY STARreg Glass Door Freezer ~ 50 Cu Ft Unit $145

R11 ENERGY STARreg Solid Door Freezer Unit $75

R12 ENERGY STARreg Glass Door Refrigerator lt50 Cu Ft Unit $30

R13 ENERGY STARreg Glass Door Refrigerator gt= 50 Cu Ft Unit $50

K14 t NtKGY ~ I AKreg ~Olld Uoor Ketngerator $ OU Cu t-t Unit $~0

R15 Suction Pipe Insulation Walk-in Coolers Linear Foot $050

R16 Suction Pipe Insulation Walk in Freezers Linear Foot $075

R17 Night Cover Linear Foot $800

R18 Strip Curtains on Walk-in Cooler Linear Foot $250

R19 Evaporator Coil Defrost Control Controller $7500

R20 Variable Speed Refrigeration Compressor Compressor $85

R21 Add Doors to Open Refrigerated Cases Door $55

R22 Door Gaskets Door $250

R23 Zero Energy Doors Door $50

R24 A ir Cooled Refrigeration Condenser Ton $10

R25 Oversized Condenser with VFD Ton $10

R26 Case Light Occupancy Controls Door $8

R27 LED Open Cose Lighting Cose $10

R28 LED Enclosed Case Lighting Refrigerated Door $30

R30 LED Enclosed Case Lighting Freezer Door $30

Refrigeration Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 35

Food Service Beverage and Snack Machine Controls Incentives are offered for refrigerated vending machines that contain non-perishable bottled and canned beverages Controller for both types of systems must include a passive infrared occupancy sensor to turn off fluorescent lights and other energized machine systems when the surrounding area is unoccupied for 15 minutes or longer For the refrigerated machines the control logic may include periodic power up at 2-hour intervals or longer to maintain product temperature and provide compressor protection

ENERGY STARreg Refrigerated Beverage Vending Machines Incentives are offered for ENERGY STARreg beverage vending machines Qualifying machines can be found at httpswwwenergystargovproductsothervending_machines

ENERGY STARreg Electric Steam Cooker This measure applies to the installation of electric ENERGY STAR steam cookers as either a new item or replacement for an existing unit Gas steam cookers are not eligible The steam cookers must meet minimum ENERGY STAR efficiency requirements A qualifying steam cooker must meet a minimum cooking efficiency of 50 percent and meet idle energy rates specified by pan capacity

ENERGY STARreg Electric Combination Oven This measure applies to electric ovens capable of handling single 12 x 20 x 25 pan per rack

ENERGY STARreg Commercial Convection Oven The oven must meet or exceed heavy load potato cooking energy efficiency of greater than 70 utilizing ASTM Standard F149 Applies only to electric ovens

ENERGY STARreg Commercial Fryers The commercial fryer must have a tested heavy load (French fry for large vats) cooking energy efficiency of greater than 80 utilizing American Society for Testing and Materials (ASTM) Standard F1361 for commercial fryers and ASTM Standard F2144 for large vat fryers Multiple vat configurations are paid per qualifying vat ENERGY STAR maintains a list of qualifying products and specifications at httpwwwenergystargov

ENERGY STARreg Commercial Hot Holding Cabinet Energy STAR rating electric

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 36

Food Service amp Other Measures FoodOther

Measure Incentive Unit Incentive

Measure Code Unit

F01 Beverage Machine Controls Unit $25

F02 Snack Machine Controls Unit $20

F03 ENERGY STARreg Refrigerated Beverage Vending Machir Unit $125

F04 ENERGY STARreg Commerc ial Steam Cooker Unit $200

F05 ENERGY STARreg Electric Combination Oven Unit $200

F06 ENERGY STARreg Commercial Electric Convection Oven Unit $150

F07 ENERGY STARreg Commerc ial Fryers Unit $100

F08 ENERGY STARregCommerc ial Hot Holding Cabinet Unit $200

Food Service Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 37

Motors and Variable Frequency DrivesEarly Replacement Motors For constant speed and uniformly loaded motors this measure applies to the replacement of old motors with new energy efficient motors of the same rated horsepower Old motors must be less than 15 years Replacements where the old motor and new motor have different horsepower ratings are considered custom measures Motors with variable speeds variable loading or industrial-specific applications are also considered custom measures

Motors Incentive Table Motors

Measure Code

HP Incentive per Motor

M01 15 - 10 $40 M02 11 - 50 $100 M03 51-100 $150 M04 gt100 $300

Only VFDs on unitary systems are eligible Non-unitary systems must be submitted as a custom measure Soft start motors are not eligible

Variable Frequency Drives on HVAC Fan Applications Incentives are offered for installing VFDs on existing HVAC fans that do not have pre-existing VFDs This measure applies to HVAC supply and return fans only All other fans including cooling tower fans must be submitted as custom measures Manually fixed speed settings on HVAC fans must be submitted via custom application The VFD must control motor speed automatically in response to pressure flow temperature or other variable signal The installation of a VSD must accompany the permanent removal or disabling of any throttling devices such as inlet vanes bypass dampers and throttling valves etc The incentive is offered per controlled HP

Variable Frequency Drives on Pump Applications Incentives are offered for installing VFDs on existing chilled water pumps and heating hot water pumps that do not have existing VFDs This measure applies to chilled water pumps and heating hot water pumps only All other pumps must be submitted as custom measures Manually fixed speed settings on pumps must be submitted via custom application The VFD must control motor speed automatically in response to pressure flow temperature or other variable signal The installation of a VSD must accompany the permanent removal or disabling of any throttling devices such as throttling valves The incentive is offered per controlled HP

Variable Speed Control for Kitchen Exhaust Hoods The measure consists of installing a new VSD in conjunction with a sensor control system that varies the exhaust rate of kitchen ventilation (exhaust andor makeup air fans) based on the heat and effluent output from the cooking appliances (ie the more heat and smokevapors generated the more ventilation needed) This involves installing a temperature sensor in the hood exhaust collar andor an optic sensor on the end of the hood that senses cooking conditions and allows the system to automatically vary the rate of exhaust to match requirements by adjusting the fan speed accordingly

Variable Speed Drives for Process or Other Equipment VFD must be used in conjunction with a process (non HVAC) application To qualify for this incentive the driven equipment must operate at least 2000 hours per year Redundant or back- up units do not qualify VFDs replacing existing VFDs do not qualify The VFD must control motor

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 38

speed automatically in response to pressure flow temperature or other variable signal VFDs installed as ldquosoft startrdquo without automatic manual closed loop speed control do not qualify The installation of a VFD must accompany the permanent removal or disabling of any throttling devices such as throttling valves The incentive is per controlled HP and only applies to controlled motors less than 50 HP

VSDVFD Incentives Table VFD

Measure Code

Measure Unit Incentive per Unit

Fan Application

V01 VFD on HVAC Fan HP $25 Pump Application

Variable Speed Control for Kitchen Exhaust Hoods

Variable Speed Drives for Process or Other Equipment

V02 VFD on Chilled Water Pumps HP $25 V03 VFD on Heating Hot Water Pumps HP $25

V04 Kitchen Exhaust Fan Retrofit Hood HP $500

V05 Process Motor lt 50 HP HP $50

Domestic Hot Water Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater This measure documents the energy savings attributed to converting from a standard electric water heater to an ENERGY STAR natural gaspropane-fired water heater or a standard oil-fired water heater with an Energy Factor of 0585

Heat Pump Water Heater This includes heat pump water heaters with energy factors meeting ENERGY STAR criteria The measure described here involves a direct retrofit of a resistive electric water heater with a heat pump water heater It does not cover systems where the heat pump is a pre-heater or is combined with other water heating sources More complicated installations can be treated as custom projects

Low Flow Pre-Rinse Spray Valve This measure applies to efficient low flow pre-rinse sprayers in grocery and food service applications The most likely areas of application are kitchens in restaurants and hotels Only premises with electric water heating may qualify for this incentive In addition the replacement pre-rinse spray nozzle must use less than 16 gallons per minute with a cleanability performance of 26 seconds per plate or less Low flow pre-rinse sprayers reduce hot water usage and save energy associated with water heating

Domestic Hot Water Incentive Table

Measure Code Measure Unit Retrofit Incentive per

Unit

W01 Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater Unit $100

W02 Heat Pump Water Heater Unit $100 W03 Low-Flow Pre-Rinse Spray Valve Valve $17

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 39

Compressed Air SystemsNo-loss Condensate Drain No-loss Condensate Drains are controlled by a sensor that monitors the level of condensate and only open when there is a need to drain condensate They close before compressed air is allowed to escape This measure is targeted to non-residential customers whose equipment is a timed drain that operates on a pre-set schedule Acceptable baseline conditions are compressed air systems with standard condensate drains operated by a solenoid and timer

Air-Entraining air nozzle This measure is targeted to non-residential customers whose compressed air equipment uses stationary air nozzles in a production application with an open copper tube of 18rdquo or 14rdquo orifice diameter Energy efficient conditions require replacement of an inefficient non-air entraining air nozzle with an energy efficient air-entraining air nozzle that use less than 15 CFM at 100 psi for industrial applications

Storage Tanks for LoadNo Load Screw Compressors This measure protocol applies to the installation of air receivers with pressureflow controls to loadno load compressors Loadno load compressors unload when there is low demand The process of unloading is done over a period of time to avoid foaming of the lubrication oil Using a storage tank with pressureflow control will buffer the air demands on the compressor Reducing the number of cycles in turn reduces the number of transition times from load to no load and saves energy The baseline equipment is a loadno load compressor with a 1 galcfm storage ratio or a modulating compressor with blowdown The high efficiency equipment is a loadno load compressor with a minimum storage ratio of 4 gallons of storage per cfm

Cycling Refrigerated Thermal Mass Dryer When air is compressed water vapor in the air condenses and collects in liquid form Some of this condensate collects in the air distribution system and can contaminate downstream components such as air tools with rust oil and pipe debris Refrigerated air dryers remove the water vapor by cooling the air to its dew point and separating the condensate Changes in production and seasonal variations in ambient air temperature lead to partial loading conditions on the dryer Standard air dryers use a hot gas bypass system that is inefficient at partial loads A Cycling Thermal Mass Dryer uses a thermal storage medium to store cooling capacity when the system is operated at partial loads allowing the dryer refrigerant compressor to cycle

This measure is targeted to non-residential customers whose equipment is a non-cycling refrigerated air dryer with a capacity of 600 cfm or below Acceptable baseline conditions are a non-cycling (eg continuous) air dryer with a capacity of 600 cfm or below The replacement of desiccant deliquescent heat-of-compression membrane or other types of dryers does not qualify under this measure

Variable Speed Air Compressor This type of compressor uses a special drive to control the speed (RPM) of the unit which in turn saves energy compared to a fixed speed equivalent

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 40

No-loss Condensate Drain Air-Entraining Air Nozzle Cycling Refrigerated Thermal Mass Dryer

Compressor Incentive per

Equipment Type Units Quantity Daily Operating Unit

Hours

CA04 Storage Tanks for LoadNo Load Screw

Compressor HP $10 Compressors

CA05 Variable Speed Air Compressor

Compressor HP $30

CA06 Compressed Air System Optimization

Compressor HP $50

Compressed Air System Optimization The submitted optimization measures must be identified in an Air System Audit or equivalent study to be eligible The measures must demonstrate energy savings as evaluated by a Program Engineer Additionally measures must also fall under one or more of the category below to be eligible

1) Install storage Receivers (new receivers only replacing existing storage receivers are ineligible)

2) Compressor control (must demonstrate improvement in partial load efficiency of the compress air system including reduceeliminate partially loaded units)

3) Dryer control 4) Source pressure reduction 5) Right-sizing distribution components such as piping filters regulators

connectors and hoses (routine maintenance replacements are ineligible) 6) Leakage detection and repair 7) Eliminate low-efficiency end-usages of compressed air 8) Heat recovery (most reduce electricity consumption of the replaced heat source)

Compressed Air Systems Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 41

lt65000 Btuh

~ 65000 Btuh and lt135000 Btuh

135000 Btuhand lt240000 Btuh

240000 Btuh and lt760000 Btuh

760000 Btuh

154

142

135

125

123

Chiller Capacity Path APath B efficiency (kWton )

lt 150 tons

~150 tons and lt300 tons

300 tons and lt400 tons

400 tons and lt600 tons

600 tons

lt75 tons

~75 tons and lt150 tons

~150 tons and lt300 tons

~300 tons and lt600 tons

600 tons

0610 FU0695 FL and 0550 IPLV0440 IPLV

0610 FU0635 FL and 0550 IPLV0400 IPLV

0560 FU0595 FL and 0520 IPLV0390 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

Path APath B efficiency (kWton )

0750 FU0780 FL and 0600 IPLV0500 IPLV

0720 FU0750 FL and 0560 IPLV0490 IPLV

0660 FU0680 FL and 0540 IPLV0440 IPLV

0610 FU0625 FL and 0520 IPLV0410 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

Data Centers Data Center incentives are available for facilities ranging in size from office server closets to large standalone facilities

Air Cooled Chiller Path APath B EER (BtuWh) lt150 tons 101 FL97 FL and 137 IPLV158 IPLV ge150 tons 101 FL97 FL and 140 IPLV161 IPLV

Air Cooled Chiller without Condenser Air-cooled chillers without condenser must be rated with matching condensers and comply with air-cooled chiller efficiency requirements

Computer Room Air Conditioner

Computer Room Air Handler Variable Speed Replacing constant speed CRAH with VSD CRAH

Water Cooled Centrifugal Chiller

Water Cooled Positive Displacement or Reciprocating Chiller

Uninterruptible Power Supply Must be Energy Star Certified UPS or have full load efficiency rating

ge948 for 20-100 kVA ge978for ge100 kVA

Mainframe Refresh The rated efficiency of the replacement Mainframes power supply must be at least 8 more

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 42

- Equipment Type Units IncentiveUnit

D1 Air Cooled Chiller Ton $4000 D2 Air Cooled Chiller W ithout Condenser Ton $2000 D3 Computer Room Air Conditioner Ton $3000 D4 Computer Room Air Handler Variable Speed Ton $1000 D5 Water Cooled Centrifugal Chiller Ton $3000 D6 Water Cooled Positive Displacement or Reciprocatin $3000 D7 Uninterruptible Power Supply 20-100 kVA $1000 D8 Uninterruptible Power Supply gt 100 kVA $1000 D9 Mainframe Refresh $2000

D10 Server Refresh $2000 D11 PC Power Managment System $600 D12 HVAC System Optimization $005 D1 3 HoUCold Aisle Containment kWh saved $005 D14 Server Virtualization kW reduction $40000 D1 5 Thin Clients Units $500

efficient compared to the existing Mainframes power supply The replacement Mainframe if Inactive must be decommissioned and removed from the Data Center

Server Refresh Replacement servers must be ENERGY STARreg certified Replacement servers power supply must be 5 more efficiency compared to the power supply of the replaced servers The replaced server must be decommissioned and removed from the data center

HVAC System Optimization Final system must have these features

-Implementation of free cooling by the addition of an economizer system -Conversion of constant speed CRACCRAH into variable speed operations using VFDs and additional control functionalities and -Elevation of exhaust air temperature

HotCold Aisle Containment Includes both Hot and Cold Aisles Installing new containment measures not replacing already existed aisle containment Plenum-only installations not eligible Must result in higher difference between the return air (hot aisle) and supply air (cold aisle) temperatures measured at rack intake and exhaust locations

Server Virtualization Minimum of consolidating 5 Servers virtualized into one Server The virtualized servers if inactive are removed from the Data Center

Thin Clients Must be ENERGY STAR certified thin clients Decommissioned clients are removed from the Data Center

Data Center Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 43

Whole Building Systems Whole Building Systems Approach

The Whole Building Systems approach is intended to encourage integrated energy efficient designs by providing enhanced incentives to the customer who addresses overall energy performance Owners of eligible and qualifying new construction and major renovation projects can receive Whole Building Systems incentives when energy modeling indicates the projectrsquos performance is over 10 better than the ASHRAE 901-2007 Savings from eligible electric end-uses in kilowatt hours define the amount of financial incentive Energy savings achieved through renewable energy sources are not counted toward project energy savings and are not included in the savings basis Incentive reservations obtained during the design phase of a project will be honored for up to 24 months

How to Apply for Whole Building Systems Incentives Before construction begins bull A Pre-notification Application must be submitted documenting the Owners intention to

seek Whole Building Systems incentives bull The Owner must confirm the goals and energy efficiency strategies being pursued by the

design team on the completed Pre-notification Worksheet (Checklist tab) and in the project Summary (Whole Building Performance Summary tab)

bull Submit executable building modeling software files bull Submit the Whole Building Performance Summary worksheet energy simulation model

inputs and outputs and supporting documentation bull Receive confirmation and eligibility notification from the PECO Smart Ideas team and

receive an incentive reservation bull The final incentive paid may differ from the reserved incentive amount The final

incentive will be calculated based on site-verified equipment installation and performance The Owners final application and complete documentation must be received within 6 months of equipment installation or certificate of occupancy whichever is later

bull An executable energy model and model output demonstrating compliance with the criteria of ASHRAE 901-2007 Appendix G will be required and the equipment data sheets LED lighting fixtures must be on the DLC or Energy STAR qualified products list (QPL) to be eligible LED fixtures not on the DLC or Energy STAR QPL has the option of submitting LM79 and LM80 test reports for evaluation against DLC and Energy STAR eligibility criteria

During the construction period bull Owner and design team continue to work closely with their chosen contractor to assure

energy efficiency measures are included and installed in the completed building

When the building is constructed and operational bull Complete the Owner final application Request an equipment verification site visit by the

PECO Smart Ideas team Equipment must be installed and fully operational o Program staff will schedule a site visit and utilize submitted documentation and

measurement tools to verify that the installation follows the submitted energy simulation model

bull When PECO confirms that there are no significant changes to the installed equipment payment of the reserved incentive will be made to the Owner within 6 weeks

bull If changes from the proposed design energy simulation are found the Owner and design team will be notified of the reduced incentive amount a period of 20 calendar days will

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 44

Improvement Incentive per Sq Ft

over Code

~11 to lt20 $0155

~20 to lt30 $0233

~30 to lt40 $0350

~40 to lt60 $0525

~60 $0700

be allowed for supplemental information to be provided if no additional information is received by PECO Smart Ideas team the reduced incentive payments will be made and sent to the Owner if additional clarification and information is available program staff will work diligently to resolve the discrepancies and arrive at a reasonable incentive adjustment with the customer

Payments made by PECO Smart Ideas are final

Customer Eligibility The Owner of the proposed new building project must be a customer of PECO and receive delivery of electric service from PECO to receive kilowatt-hour based incentives Please note that electricity supply can be provided by any vendor

Project Eligibility bull The project must be a new construction or major renovation Major renovations involving

the removal and redesign of at least two building systems (such as interior lighting and mechanical systems) may apply for Whole Building Systems incentives

bull To qualify for incentives projects must demonstrate energy efficiency enhancements that achieve at least 11 improvement in the proposed design versus the standard baseline

bull The Owner must submit a Pre-approval Application to the program at the stage where changes for increased energy efficiency are still feasible and construction has not been completed

bull Projects receiving Whole Building Systems incentives are not eligible to receive other incentives such as the prescriptive or custom program incentives for the same scope

bull Project components that are NOT eligible for consideration as a basis for PECO Smart Ideas include the following o Alternative fuel sources (eg use of gas or oil equipment in lieu of electric) Please note

that combined heat and power (CHP) systems will be incentivized for the electricity they produce

o Renewable energy sources (eg solar wind biomass) bull Ineligible savings include exterior lighting process receptacle miscellaneous loads and

other unregulated end-uses Custom incentives are available for new construction exterior lighting

Whole Building Systems Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 45

Custom Project Specifications Instructions for Energy Savings Calculations for Custom Projects Custom projects must involve measures that result in a reduction in electric energy use (kWh) Electricity savings may result from either efficiency improvements or fuel switching Custom Incentives are based on the first year kilowatt-hour savings Custom applications must be accompanied by detailed engineering calculations that document the annual total energy savings

The following serve as guidelines for the minimum required documentation

Equipment Information Submittals bull A list of the present and proposed equipment and components to be installed

including manufacturerrsquos catalogmodel number bull Manufacturerrsquos specification sheets showing capacities and performance for all major

components

Energy Savings Calculations Provide calculations documenting the predicted energy consumption of the existing (or baseline) and proposed system using appropriate analytical tools and clearly stated assumptions Calculations may be performed by ldquohandrdquo but spreadsheet analysis or more rigorous modeling is preferred All analysis should be provided in electronic format All assumptions such as operating hours existing and proposed equipment operational details must be presented Engineering algorithms and procedures from recognized technical organizations such as ASHRAE SMACNA ANSI etc must be used Use rated performance factors tested under accepted procedures specified by recognized rating agencies such as AHRI ANSI ASTM etc Provide an explanation when equipment performance rating conditions vary from standard conditions

In support of the calculations extensive documentation must be provided that provides the basis for the savings estimates The documentation must provide information on the equipment operating schedule daily and seasonal load profile and baseline AND energy efficient equipment performance at the operating loads Typical documentation for custom projects often includes bull Engineering or architectural drawings and ldquoequipment schedulerdquo sheets bull Component specification sheets that include part load efficiency or performance

factors bull Spreadsheet calculations or inputoutput files and results from system modeling or

other engineering analysis using accepted engineering algorithms and practices bull Log sheets trend logs from a building management system or other operating

documentation that are often necessary to document operating hours and equipment loading and used as a basis for the calculations (in some cases short term monitoring may be required to document the load profile)

bull Control sequence of operations that are necessary where controls play a part in the savings equation

Additional documentation other than that described in the application may be required for program participation Larger projects may also require pre- and post-project sub metering or monitoring of loads andor power input as part of another measurement and verification activity to demonstrate the actual energy savings that are realized

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 46

Baseline for Custom Analysis Where equipment is replaced prior to the end of its rated service life in order to achieve energy savings the existing equipment performance may be used as the baseline in the energy savings calculations Where equipment is replaced due to failure or for other reasons (such as obsolescence or a need for more capacity) the baseline performance used in the savings calculation should be either the minimum performance that would be required by code for that equipment type and application (where a code applies) or the performance of the equipment that would have been selected as the customers standard practice when a code does not apply

Baseline or Existing System Summary On custom worksheet on application form include make model number name plate information (such as operating voltage and rated full load amps) rated capacity quantities equipment condition and age facility operating hours equipment operating schedule and load curves If needed attach separate sheets

All decisions regarding incentives for custom projects are in the sole discretion of PECO

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 47

APPENDIX PROGRAM UPDATES SUMMARY (Q1 2017) Multifamily Nursing Home and Assisted Living retrofit customers need to apply for incentives through the PECO Smart Ideas Multi-Family Program administered by Franklin Energy For more information please contact Taylor Adler at tadlerfranklinenergycom or call 1-844-4BIZ-SAVE Multifamily Nursing Home and Assisted Living new construction customers can proceed with applying for incentives here

Revised Incentives

Data Centers

Measure Incentive Effective Immediately Previous Incentive

Air-cooled chiller for data centers $40ton $10ton Air-cooled chiller without condenser for data centers $20ton $10ton

Computer room air conditioner $30ton $7ton Water-cooled centrifugal chiller for data centers $30ton $5ton Water-cooled positive displacement or reciprocating chiller for data centers

$30ton $5ton

Uninterruptible power supply 20-100 kVA $10kVA $6kVA Uninterruptible power supply gt100 kVA $10kVA $1kVA Mainframe refresh $20kW installed $5kW installed Server refresh $20kW installed $4kW installed Server virtualization $400kW reduction $4kW reduction Thin clients $5units $4units

Lighting (Effective Immediately)

Measure Incentive Effective Immediately Specification Previous

Incentive Specification

New construction exterior LED outdoor flood light LED parking garage and canopy lighting LED polearm mounted parking and roadway lighting LED wall mount fixture

$005kWh (custom)

Lighting Power Density (LPD) Requirements Unchanged

$10-54 fixture

Lighting Power Density (LPD) (Wft2) by Space Type or Building Area

LED Replacement Lamps (Tubes) 2

$250lamp 5 Min Watts Reduced

$250lamp 6 Min Watts Reduced

LED Replacement Lamps (Tubes) 4

$400lamp 10 Min Watts Reduced

$400lamp 12 Min Watts Reduced

Permanent Fixture Removal $010Watt removed

Clarification of calculation to represent actual Wattage removed

$010Watt removed

Lighting (Effective 6117)

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 48

Measure Incentive Effective 6117 Specification Previous

Incentive Previous Specification

Interior LED high-bay fixtures andor retrofit kits if lt 20000 LED Lumens

$50fixture 150 Min Watts Reduced

$75fixture 150 Min Watts Reduced

Interior LED high-bay fixtures andor retrofit kits if gt 20000 LED Lumens

$75fixture 225 Min Watts Reduced

$75fixture 150 Min Watts Reduced

New Incentives

Compressed Air

Measure New Incentive Effective Immediately Variable speed air compressor $30compressor HP Compressed air system optimization $50compressor HP

HVAC

Measure New Incentive Effective Immediately ECM circulation pump $50pump Retro-commissioning cooling systems $750ton Retro-commissioning whole building $010square foot Energy management system $25ton Demand controlled ventilation $25ton Water-cooled air conditioner $22ton

Food Service

Measure New Incentive Effective Immediately Combination oven $200unit ENERGY STARreg commercial convection oven $150unit ENERGY STARreg commercial fryers $100unit ENERGY STARreg commercial hot holding cabinet $200unit

Refrigeration

Measure New Incentive Effective Immediately Air-cooled refrigeration condenser $10ton Oversized condenser with VFD $10ton Case light occupancy controls $750door

Lighting

Measure New Incentive Effective Immediately Interior central lighting controls $00175sq foot

Motors and Drives

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 49

-

Measure New Incentive Effective Immediately VFD for dust collection system motor $50HP

Application Clarifications and Revised Requirements

Clarification of LED Eligibility for New Construction or Retrofit Projects

LED Eligibility is determined by whether lighting products are listed in either the DesignLights Consortium (DLC) Qualified Products List of commercial-grade LED luminaires or the US Environmental Protection Agency database of ENERGY STAR certified products For products not yet listed contractors may submit LM79 and LM80 test reports PECO Smart Ideas engineers will review test reports to determine if the product in question meets performance specifications

Revised W 9 Requirement

W-9 forms EIN numbers are no longer required

Deletion of erroneous statement in New Construction Lighting

The following statement from previous Business Manual has been deleted ldquoThe minimum lighting power density used to calculate the incentive shall be no lower than 50 of the ASHRAE 901-2007 valuerdquo

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 50

  • Commercial amp Industrial Program Application Manual
    • Follow This Easy Process
      • Pre-Approval Application Checklist
      • Final Application Checklist
          • Terms and Conditions
            • Program Effective Dates
            • Program and Project Eligibility
            • Incentive Payment Limits
            • Application Review Process
            • Inspections andor PUCrsquos Statewide Program Evaluation
            • Requirements for Custom Project Electricity Savings Calculation
            • Tax Liability
            • No Endorsement
            • Warranties
            • Limitation of Liability
            • Assignment
            • Customerrsquos Certification
            • Termination
            • Acknowledgement
              • Retrofit Lighting Solutions
                • General Linear Fluorescent Lamp and Ballast Specification Requirements
                • LED Lamps and Fixtures
                • Minimum Watts Reduced
                • Linear LED (Tubes)
                • Permanent Fixture Removal
                  • LED Traffic Signals
                    • LED Traffic Signals Incentive Table
                      • New Construction Lighting Specifications
                        • New Construction Lighting Incentives Table
                          • New Construction Lighting Power Density Code
                              • Exterior New Construction Lighting
                              • HVAC Equipment
                                • Air-Source Air Conditioners and Air-Source Heat Pumps
                                • Package Terminal Systems (Replacements)
                                • Ductless Mini-Split Heat Pump lt54 Tons
                                • Geothermal Heat Pump
                                  • Other HVAC Equipment
                                    • Hotel Guest Room Occupancy Sensor
                                    • ECM Circulation Fan
                                    • ECM Circulation Pump
                                    • Retrocomissioning Cooling Systems
                                    • Retrocomissioning Whole Building
                                    • Energy Management System
                                    • Demand Controlled Ventilation
                                    • Other HVAC Incentives Table
                                      • Unitary HVAC Chillers
                                        • Air-Cooled Chillers Water Cooled Positive Displacement Reciprocating Chillers and Water Cooled Centrifugal Chillers
                                          • Refrigeration
                                            • Anti-Sweat Heater Controls
                                            • Evaporator Fan Controls
                                            • Floating Head Pressure Controls
                                            • Automatic Door Closers for Walk-In Coolers and Freezers
                                            • EC Motor for Walk-inReach-in Refrigerated cases or Freezer cases
                                            • ENERGY STAR Solid Door Freezer and Glass Door Freezer and Refrigerators
                                            • Refrigeration Suction Pipe Insulation
                                            • Night Cover
                                            • Strip Curtain on Walk-In CoolerFreezer
                                            • Evaporator Coil Defrost Control
                                            • Variable Speed Refrigeration Compressor
                                            • Add Doors to Open Refrigerated Cases
                                            • Door Gaskets
                                            • Zero Energy Doors
                                            • Air Cooled Refrigeration Condenser
                                            • Oversized Condenser with VFD
                                            • Case Light Occupancy Controls
                                            • LED Open Case Lighting
                                            • LED Enclosed Case Lighting Refrigerated
                                            • LED Enclosed Case Lighting Freezer
                                              • Food Service
                                                • Beverage and Snack Machine Controls
                                                • ENERGY STARreg Refrigerated Beverage Vending Machines
                                                • ENERGY STARreg Electric Steam Cooker
                                                • ENERGY STARreg Electric Combination Oven
                                                • ENERGY STARreg Commercial Convection Oven
                                                • ENERGY STARreg Commercial Fryers
                                                • ENERGY STARreg Commercial Hot Holding Cabinet
                                                  • Motors and Variable Frequency Drives
                                                    • Early Replacement Motors
                                                    • Variable Frequency Drives on HVAC Fan Applications
                                                    • Variable Frequency Drives on Pump Applications
                                                    • Variable Speed Control for Kitchen Exhaust Hoods
                                                    • Variable Speed Drives for Process or Other Equipment
                                                      • Domestic Hot Water
                                                        • Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater
                                                        • Heat Pump Water Heater
                                                        • Low Flow Pre-Rinse Spray Valve
                                                        • Domestic Hot Water Incentive Table
                                                          • Compressed Air Systems
                                                            • No-loss Condensate Drain
                                                            • Air-Entraining air nozzle
                                                            • Storage Tanks for LoadNo Load Screw Compressors
                                                            • Cycling Refrigerated Thermal Mass Dryer
                                                            • Variable Speed Air Compressor
                                                            • Compressed Air System Optimization
                                                            • Compressed Air Systems Incentive Table
                                                              • Data Centers
                                                                • Air Cooled Chiller
                                                                • Air Cooled Chiller without Condenser
                                                                • Computer Room Air Conditioner
                                                                • Computer Room Air Handler Variable Speed
                                                                  • Replacing constant speed CRAH with VSD CRAH
                                                                    • Water Cooled Centrifugal Chiller
                                                                    • Water Cooled Positive Displacement or Reciprocating Chiller
                                                                    • Uninterruptible Power Supply
                                                                    • Mainframe Refresh
                                                                    • Server Refresh
                                                                      • Whole Building Systems
                                                                        • Whole Building Systems Approach
                                                                        • How to Apply for Whole Building Systems Incentives
                                                                        • Customer Eligibility
                                                                        • Project Eligibility
                                                                        • Whole Building Systems Incentives Table
                                                                          • Custom Project Specifications
                                                                            • Instructions for Energy Savings Calculations for Custom Projects
                                                                            • Equipment Information Submittals
                                                                            • Energy Savings Calculations
                                                                            • Baseline for Custom Analysis
                                                                            • Baseline or Existing System Summary

C3 lt 75 tons

C4 75 tons and lt 150 tons

cs ~ 150 tons and lt 300 tons C6 ~ 300 tons

Water Cooled Centrifugal Chillers C7 lt 300 tons CB ~ 300 tons and lt 600 tons

C9 ~ 600 tons

Path A

Qualifying Full Load Efficiency

Qualifying IPLV Efficiency

Path B

Qualifying Full Load Efficiency

Qualifying IPLV Efficiency

0780 kWton 0567 kWton 0800 kWton 0540 kWton

0775 kWton 0554 kWton 0790 kWton 0527 kWton

0680 kWton 0522 kWton 0718 kWton 0486 kWton 0620 kWton 0486 kWton 0639 kWton 0441 kWton

0634 kWton 0536 kWton 0639 kWton 0405 kWton 0576 kWton 0494 kWton 0600 kWton 0360 kWton

0570 kWton 0494 kWton 0590 kWton 0360 kWton

I

Incentive ($ton)

$17

$17

Unitary Chiller Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 31

Refrigeration

Anti-Sweat Heater Controls Incentives are offered for devices that sense the relative humidity in the air outside of the display case and cycles or turns off the glass door (if applicable) and frame anti-sweat heaters when the ambient dew point is below a preset set point Technologies that can turn off anti-sweat heaters based on sensing condensation (on the inner glass pane) also qualify Incentive is based on the number of doors

Evaporator Fan Controls This measure is for the installation of controls in medium temperature walk-in coolers The controller reduces airflow of the evaporator fans when there is no refrigerant flow The measure must control a minimum of 120 HP where fans operate continuously at full speed The measure also must reduce fan motor power by at least 75 during the off cycle This measure is not applicable if any of the following conditions apply 1) Compressor runs all the time with high duty cycle 2) Evaporator fan does not run at full speed all the time 3) Evaporator fan motor runs on poly-phase power 4) Evaporator fan motor is not shaded-pole or permanent split capacitor (PSC) 5) Evaporator fan does not use off-cycle or time-off defrost

Floating Head Pressure Controls Controls must vary head pressure to adjust condensing temperatures in relation to outdoor air temperature Must replace existing constant pressure or manually controlled systems to achieve reduced head pressure in order to maintain a minimum saturated condensing temperature of 70 degF or a 20 degF variance below design heat pressure during mild weather conditions Compressor size must be at least 5 HP

Automatic Door Closers for Walk-In Coolers and Freezers The auto-closer should be applied to the main insulated opaque door(s) of a walk-in cooler or freezer The auto-closer must be able to firmly close that door when it is within one inch of full closure This must be a newly installed automatic door closer replacements on previously installed door closers are not eligible for an incentive

EC Motor for Walk-inReach-in Refrigerated cases or Freezer cases Incentives are offered for replacement of an existing standard-efficiency shaded-pole or permanent split capacitor evaporator fan motor in refrigerated display cases or fan coil in walk-ins The replacement unit must be an Electronically Commutated Motor (ECM) This measure cannot be used in conjunction with the Evaporator Fan Controller measure

ENERGY STAR Solid Door Freezer and Glass Door Freezer and Refrigerators Incentives are offered for replacement of existing self-contained refrigerators and freezers with units that are ENERGY STARreg listed Only units with built-in refrigeration systems are qualified Units with remote refrigeration systems or units do not qualify Customers must provide proof that the appliance meets the CEE or ENERGY STAR efficiency specifications using ASHRAE Standard 72-2005 (38degF plusmn 2degF) Incentive is per unit

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 32

Refrigeration Suction Pipe Insulation 1 Must insulate bare refrigeration suction lines of 1 58 inches in diameter or less on existing equipment only 2 Cooler lines require frac34 inch of flexible closed-cell nitrite rubber or an equivalent insulation 3 Freezer lines require 1-inch of flexible closed-cell nitrite rubber or an equivalent insulation 4 Insulation exposed to the outdoors must be protected from the weather (ie jacketed with a medium-gauge aluminum jacket)

Night Cover 1 Must install a cover on an existing open refrigerated display case to decrease its cooling load during off hours 2 The equipment manufacturer must not object to the use of night covers for the existing display case model 3 This rebate is based on the linear footage of the installed 4 The cover must be applied for a period of at least six hours

Strip Curtain on Walk-In CoolerFreezer 1 New strip curtains or plastic swinging doors must be installed on doorways of refrigerated spaces (conditioned to less than 50deg F) 2 Rebate is based on the linear footage of the doorway that the strip curtains are being installed in 3 Opening between the strip curtain and bottom of doorway must be no larger than 1 inch 4 Strips must have an overlay greater than 1 inch

Evaporator Coil Defrost Control 1The current system must include an operating electric defrost system with a functional electroshymechanical time clock 2 Evaporator coil temperature and pressure must be monitored by controller in order to determine optimal defrost cycles 3 New intelligent control systems to control the defrost systems will typically replace timed- defrost controls

Variable Speed Refrigeration Compressor This measure VSD control for refrigeration systems and its eligibility targets applies to retrofit construction in the commercial and industrial building sectors it is most applicable to grocery stores or food processing applications with refrigeration systems This protocol is for a VSD control system replacing a slide valve control system

Add Doors to Open Refrigerated Cases The eligible retrofit equipment is either no sweat doors or doors with anti-sweat heaters If a lighting retrofit is included with the new doors it must consume the same amount of energy or less energy than the old lighting Upgrades to lighting or other system components should be processed separately Horizontal cases are not eligible and should be processed as custom

Door Gaskets PECO Smart Ideas For Your Business CampI Program Application Manual

Q1 2017 pg 33

This measure is applicable to commercial refrigeration and applies to the replacement of worn-out gaskets with new better-fitting gaskets Applicable gaskets include those located on the doors of walk-in andor reach-in coolers and freezers This protocol applies to the main doors of both low temperature (ldquofreezerrdquo ndash below 32 degF) and medium temperature (ldquocoolerrdquo ndash above 32 degF) walk-ins

Zero Energy Doors For this measure a no-heatlow-heat clear glass door must be installed on an upright display case It is limited to door heights of 57 inches or more Doors must have either heat reflective treated glass be gas filled or both This measure applies to low temperature cases onlymdashthose with a case temperature below 0degF Doors must have 3 or more panes Total door rail glass and frame heater amperage ( 120 volt) cannot exceed 039413 amps per door for low temperature display cases Rebate is based on the door width (not including case frame)

Air Cooled Refrigeration Condenser Approach temperature lt8F for low temperature loads lt13F for medium temperature loads

Oversized Condenser with VFD New standalone condenser must no more than 150 larger than load

Case Light Occupancy Controls Acceptable for freezer or refrigerated cases as well as open cases or cases with doors

LED Open Case Lighting For replacing open case T8 or T12 fluorescent fixtures with DLC listed LEDs on refrigerators coolers and freezers

LED Enclosed Case Lighting Refrigerated LED case lighting with or without motion sensors on enclosed refrigerated vertical displays The baseline equipment is assumed to be cases with uncontrolled T8 or T12 linear fluorescent lamps

LED Enclosed Case Lighting Freezer LED case lighting with or without motion sensors on enclosed freezer vertical displays The baseline equipment is assumed to be cases with uncontrolled T8 or T12 linear fluorescent lamps

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 34

Refrigeration Measures Ref Measure

Measure Incentive Unit IncentiveUnit Code R01 Anti-Sweat Heater Controls Door $30

R02 Evaporator Fan Controls Controller $50

R03 Floating-head Pressure Controls HP $20

R04 Automatic Door Closers fo r Walk-in Coolers Door $75

R05 Automatic Door Closers fo r Walk-in Freezers Door $75

R06 Evaporator Fan EC Motor fo r Reach- in Cases Motor $35

RO Evaporator Fan EC Motor fo r Walk-in Cases Motor $50

R08 ENERGY STARreg Glass Door Freezer lt15 Cu Ft Unit $100

R09 ENERGY STARreg Glass Door Freezer 15- 49 Cu Ft Unit $125

R10 ENERGY STARreg Glass Door Freezer ~ 50 Cu Ft Unit $145

R11 ENERGY STARreg Solid Door Freezer Unit $75

R12 ENERGY STARreg Glass Door Refrigerator lt50 Cu Ft Unit $30

R13 ENERGY STARreg Glass Door Refrigerator gt= 50 Cu Ft Unit $50

K14 t NtKGY ~ I AKreg ~Olld Uoor Ketngerator $ OU Cu t-t Unit $~0

R15 Suction Pipe Insulation Walk-in Coolers Linear Foot $050

R16 Suction Pipe Insulation Walk in Freezers Linear Foot $075

R17 Night Cover Linear Foot $800

R18 Strip Curtains on Walk-in Cooler Linear Foot $250

R19 Evaporator Coil Defrost Control Controller $7500

R20 Variable Speed Refrigeration Compressor Compressor $85

R21 Add Doors to Open Refrigerated Cases Door $55

R22 Door Gaskets Door $250

R23 Zero Energy Doors Door $50

R24 A ir Cooled Refrigeration Condenser Ton $10

R25 Oversized Condenser with VFD Ton $10

R26 Case Light Occupancy Controls Door $8

R27 LED Open Cose Lighting Cose $10

R28 LED Enclosed Case Lighting Refrigerated Door $30

R30 LED Enclosed Case Lighting Freezer Door $30

Refrigeration Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 35

Food Service Beverage and Snack Machine Controls Incentives are offered for refrigerated vending machines that contain non-perishable bottled and canned beverages Controller for both types of systems must include a passive infrared occupancy sensor to turn off fluorescent lights and other energized machine systems when the surrounding area is unoccupied for 15 minutes or longer For the refrigerated machines the control logic may include periodic power up at 2-hour intervals or longer to maintain product temperature and provide compressor protection

ENERGY STARreg Refrigerated Beverage Vending Machines Incentives are offered for ENERGY STARreg beverage vending machines Qualifying machines can be found at httpswwwenergystargovproductsothervending_machines

ENERGY STARreg Electric Steam Cooker This measure applies to the installation of electric ENERGY STAR steam cookers as either a new item or replacement for an existing unit Gas steam cookers are not eligible The steam cookers must meet minimum ENERGY STAR efficiency requirements A qualifying steam cooker must meet a minimum cooking efficiency of 50 percent and meet idle energy rates specified by pan capacity

ENERGY STARreg Electric Combination Oven This measure applies to electric ovens capable of handling single 12 x 20 x 25 pan per rack

ENERGY STARreg Commercial Convection Oven The oven must meet or exceed heavy load potato cooking energy efficiency of greater than 70 utilizing ASTM Standard F149 Applies only to electric ovens

ENERGY STARreg Commercial Fryers The commercial fryer must have a tested heavy load (French fry for large vats) cooking energy efficiency of greater than 80 utilizing American Society for Testing and Materials (ASTM) Standard F1361 for commercial fryers and ASTM Standard F2144 for large vat fryers Multiple vat configurations are paid per qualifying vat ENERGY STAR maintains a list of qualifying products and specifications at httpwwwenergystargov

ENERGY STARreg Commercial Hot Holding Cabinet Energy STAR rating electric

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 36

Food Service amp Other Measures FoodOther

Measure Incentive Unit Incentive

Measure Code Unit

F01 Beverage Machine Controls Unit $25

F02 Snack Machine Controls Unit $20

F03 ENERGY STARreg Refrigerated Beverage Vending Machir Unit $125

F04 ENERGY STARreg Commerc ial Steam Cooker Unit $200

F05 ENERGY STARreg Electric Combination Oven Unit $200

F06 ENERGY STARreg Commercial Electric Convection Oven Unit $150

F07 ENERGY STARreg Commerc ial Fryers Unit $100

F08 ENERGY STARregCommerc ial Hot Holding Cabinet Unit $200

Food Service Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 37

Motors and Variable Frequency DrivesEarly Replacement Motors For constant speed and uniformly loaded motors this measure applies to the replacement of old motors with new energy efficient motors of the same rated horsepower Old motors must be less than 15 years Replacements where the old motor and new motor have different horsepower ratings are considered custom measures Motors with variable speeds variable loading or industrial-specific applications are also considered custom measures

Motors Incentive Table Motors

Measure Code

HP Incentive per Motor

M01 15 - 10 $40 M02 11 - 50 $100 M03 51-100 $150 M04 gt100 $300

Only VFDs on unitary systems are eligible Non-unitary systems must be submitted as a custom measure Soft start motors are not eligible

Variable Frequency Drives on HVAC Fan Applications Incentives are offered for installing VFDs on existing HVAC fans that do not have pre-existing VFDs This measure applies to HVAC supply and return fans only All other fans including cooling tower fans must be submitted as custom measures Manually fixed speed settings on HVAC fans must be submitted via custom application The VFD must control motor speed automatically in response to pressure flow temperature or other variable signal The installation of a VSD must accompany the permanent removal or disabling of any throttling devices such as inlet vanes bypass dampers and throttling valves etc The incentive is offered per controlled HP

Variable Frequency Drives on Pump Applications Incentives are offered for installing VFDs on existing chilled water pumps and heating hot water pumps that do not have existing VFDs This measure applies to chilled water pumps and heating hot water pumps only All other pumps must be submitted as custom measures Manually fixed speed settings on pumps must be submitted via custom application The VFD must control motor speed automatically in response to pressure flow temperature or other variable signal The installation of a VSD must accompany the permanent removal or disabling of any throttling devices such as throttling valves The incentive is offered per controlled HP

Variable Speed Control for Kitchen Exhaust Hoods The measure consists of installing a new VSD in conjunction with a sensor control system that varies the exhaust rate of kitchen ventilation (exhaust andor makeup air fans) based on the heat and effluent output from the cooking appliances (ie the more heat and smokevapors generated the more ventilation needed) This involves installing a temperature sensor in the hood exhaust collar andor an optic sensor on the end of the hood that senses cooking conditions and allows the system to automatically vary the rate of exhaust to match requirements by adjusting the fan speed accordingly

Variable Speed Drives for Process or Other Equipment VFD must be used in conjunction with a process (non HVAC) application To qualify for this incentive the driven equipment must operate at least 2000 hours per year Redundant or back- up units do not qualify VFDs replacing existing VFDs do not qualify The VFD must control motor

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 38

speed automatically in response to pressure flow temperature or other variable signal VFDs installed as ldquosoft startrdquo without automatic manual closed loop speed control do not qualify The installation of a VFD must accompany the permanent removal or disabling of any throttling devices such as throttling valves The incentive is per controlled HP and only applies to controlled motors less than 50 HP

VSDVFD Incentives Table VFD

Measure Code

Measure Unit Incentive per Unit

Fan Application

V01 VFD on HVAC Fan HP $25 Pump Application

Variable Speed Control for Kitchen Exhaust Hoods

Variable Speed Drives for Process or Other Equipment

V02 VFD on Chilled Water Pumps HP $25 V03 VFD on Heating Hot Water Pumps HP $25

V04 Kitchen Exhaust Fan Retrofit Hood HP $500

V05 Process Motor lt 50 HP HP $50

Domestic Hot Water Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater This measure documents the energy savings attributed to converting from a standard electric water heater to an ENERGY STAR natural gaspropane-fired water heater or a standard oil-fired water heater with an Energy Factor of 0585

Heat Pump Water Heater This includes heat pump water heaters with energy factors meeting ENERGY STAR criteria The measure described here involves a direct retrofit of a resistive electric water heater with a heat pump water heater It does not cover systems where the heat pump is a pre-heater or is combined with other water heating sources More complicated installations can be treated as custom projects

Low Flow Pre-Rinse Spray Valve This measure applies to efficient low flow pre-rinse sprayers in grocery and food service applications The most likely areas of application are kitchens in restaurants and hotels Only premises with electric water heating may qualify for this incentive In addition the replacement pre-rinse spray nozzle must use less than 16 gallons per minute with a cleanability performance of 26 seconds per plate or less Low flow pre-rinse sprayers reduce hot water usage and save energy associated with water heating

Domestic Hot Water Incentive Table

Measure Code Measure Unit Retrofit Incentive per

Unit

W01 Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater Unit $100

W02 Heat Pump Water Heater Unit $100 W03 Low-Flow Pre-Rinse Spray Valve Valve $17

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 39

Compressed Air SystemsNo-loss Condensate Drain No-loss Condensate Drains are controlled by a sensor that monitors the level of condensate and only open when there is a need to drain condensate They close before compressed air is allowed to escape This measure is targeted to non-residential customers whose equipment is a timed drain that operates on a pre-set schedule Acceptable baseline conditions are compressed air systems with standard condensate drains operated by a solenoid and timer

Air-Entraining air nozzle This measure is targeted to non-residential customers whose compressed air equipment uses stationary air nozzles in a production application with an open copper tube of 18rdquo or 14rdquo orifice diameter Energy efficient conditions require replacement of an inefficient non-air entraining air nozzle with an energy efficient air-entraining air nozzle that use less than 15 CFM at 100 psi for industrial applications

Storage Tanks for LoadNo Load Screw Compressors This measure protocol applies to the installation of air receivers with pressureflow controls to loadno load compressors Loadno load compressors unload when there is low demand The process of unloading is done over a period of time to avoid foaming of the lubrication oil Using a storage tank with pressureflow control will buffer the air demands on the compressor Reducing the number of cycles in turn reduces the number of transition times from load to no load and saves energy The baseline equipment is a loadno load compressor with a 1 galcfm storage ratio or a modulating compressor with blowdown The high efficiency equipment is a loadno load compressor with a minimum storage ratio of 4 gallons of storage per cfm

Cycling Refrigerated Thermal Mass Dryer When air is compressed water vapor in the air condenses and collects in liquid form Some of this condensate collects in the air distribution system and can contaminate downstream components such as air tools with rust oil and pipe debris Refrigerated air dryers remove the water vapor by cooling the air to its dew point and separating the condensate Changes in production and seasonal variations in ambient air temperature lead to partial loading conditions on the dryer Standard air dryers use a hot gas bypass system that is inefficient at partial loads A Cycling Thermal Mass Dryer uses a thermal storage medium to store cooling capacity when the system is operated at partial loads allowing the dryer refrigerant compressor to cycle

This measure is targeted to non-residential customers whose equipment is a non-cycling refrigerated air dryer with a capacity of 600 cfm or below Acceptable baseline conditions are a non-cycling (eg continuous) air dryer with a capacity of 600 cfm or below The replacement of desiccant deliquescent heat-of-compression membrane or other types of dryers does not qualify under this measure

Variable Speed Air Compressor This type of compressor uses a special drive to control the speed (RPM) of the unit which in turn saves energy compared to a fixed speed equivalent

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 40

No-loss Condensate Drain Air-Entraining Air Nozzle Cycling Refrigerated Thermal Mass Dryer

Compressor Incentive per

Equipment Type Units Quantity Daily Operating Unit

Hours

CA04 Storage Tanks for LoadNo Load Screw

Compressor HP $10 Compressors

CA05 Variable Speed Air Compressor

Compressor HP $30

CA06 Compressed Air System Optimization

Compressor HP $50

Compressed Air System Optimization The submitted optimization measures must be identified in an Air System Audit or equivalent study to be eligible The measures must demonstrate energy savings as evaluated by a Program Engineer Additionally measures must also fall under one or more of the category below to be eligible

1) Install storage Receivers (new receivers only replacing existing storage receivers are ineligible)

2) Compressor control (must demonstrate improvement in partial load efficiency of the compress air system including reduceeliminate partially loaded units)

3) Dryer control 4) Source pressure reduction 5) Right-sizing distribution components such as piping filters regulators

connectors and hoses (routine maintenance replacements are ineligible) 6) Leakage detection and repair 7) Eliminate low-efficiency end-usages of compressed air 8) Heat recovery (most reduce electricity consumption of the replaced heat source)

Compressed Air Systems Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 41

lt65000 Btuh

~ 65000 Btuh and lt135000 Btuh

135000 Btuhand lt240000 Btuh

240000 Btuh and lt760000 Btuh

760000 Btuh

154

142

135

125

123

Chiller Capacity Path APath B efficiency (kWton )

lt 150 tons

~150 tons and lt300 tons

300 tons and lt400 tons

400 tons and lt600 tons

600 tons

lt75 tons

~75 tons and lt150 tons

~150 tons and lt300 tons

~300 tons and lt600 tons

600 tons

0610 FU0695 FL and 0550 IPLV0440 IPLV

0610 FU0635 FL and 0550 IPLV0400 IPLV

0560 FU0595 FL and 0520 IPLV0390 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

Path APath B efficiency (kWton )

0750 FU0780 FL and 0600 IPLV0500 IPLV

0720 FU0750 FL and 0560 IPLV0490 IPLV

0660 FU0680 FL and 0540 IPLV0440 IPLV

0610 FU0625 FL and 0520 IPLV0410 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

Data Centers Data Center incentives are available for facilities ranging in size from office server closets to large standalone facilities

Air Cooled Chiller Path APath B EER (BtuWh) lt150 tons 101 FL97 FL and 137 IPLV158 IPLV ge150 tons 101 FL97 FL and 140 IPLV161 IPLV

Air Cooled Chiller without Condenser Air-cooled chillers without condenser must be rated with matching condensers and comply with air-cooled chiller efficiency requirements

Computer Room Air Conditioner

Computer Room Air Handler Variable Speed Replacing constant speed CRAH with VSD CRAH

Water Cooled Centrifugal Chiller

Water Cooled Positive Displacement or Reciprocating Chiller

Uninterruptible Power Supply Must be Energy Star Certified UPS or have full load efficiency rating

ge948 for 20-100 kVA ge978for ge100 kVA

Mainframe Refresh The rated efficiency of the replacement Mainframes power supply must be at least 8 more

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 42

- Equipment Type Units IncentiveUnit

D1 Air Cooled Chiller Ton $4000 D2 Air Cooled Chiller W ithout Condenser Ton $2000 D3 Computer Room Air Conditioner Ton $3000 D4 Computer Room Air Handler Variable Speed Ton $1000 D5 Water Cooled Centrifugal Chiller Ton $3000 D6 Water Cooled Positive Displacement or Reciprocatin $3000 D7 Uninterruptible Power Supply 20-100 kVA $1000 D8 Uninterruptible Power Supply gt 100 kVA $1000 D9 Mainframe Refresh $2000

D10 Server Refresh $2000 D11 PC Power Managment System $600 D12 HVAC System Optimization $005 D1 3 HoUCold Aisle Containment kWh saved $005 D14 Server Virtualization kW reduction $40000 D1 5 Thin Clients Units $500

efficient compared to the existing Mainframes power supply The replacement Mainframe if Inactive must be decommissioned and removed from the Data Center

Server Refresh Replacement servers must be ENERGY STARreg certified Replacement servers power supply must be 5 more efficiency compared to the power supply of the replaced servers The replaced server must be decommissioned and removed from the data center

HVAC System Optimization Final system must have these features

-Implementation of free cooling by the addition of an economizer system -Conversion of constant speed CRACCRAH into variable speed operations using VFDs and additional control functionalities and -Elevation of exhaust air temperature

HotCold Aisle Containment Includes both Hot and Cold Aisles Installing new containment measures not replacing already existed aisle containment Plenum-only installations not eligible Must result in higher difference between the return air (hot aisle) and supply air (cold aisle) temperatures measured at rack intake and exhaust locations

Server Virtualization Minimum of consolidating 5 Servers virtualized into one Server The virtualized servers if inactive are removed from the Data Center

Thin Clients Must be ENERGY STAR certified thin clients Decommissioned clients are removed from the Data Center

Data Center Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 43

Whole Building Systems Whole Building Systems Approach

The Whole Building Systems approach is intended to encourage integrated energy efficient designs by providing enhanced incentives to the customer who addresses overall energy performance Owners of eligible and qualifying new construction and major renovation projects can receive Whole Building Systems incentives when energy modeling indicates the projectrsquos performance is over 10 better than the ASHRAE 901-2007 Savings from eligible electric end-uses in kilowatt hours define the amount of financial incentive Energy savings achieved through renewable energy sources are not counted toward project energy savings and are not included in the savings basis Incentive reservations obtained during the design phase of a project will be honored for up to 24 months

How to Apply for Whole Building Systems Incentives Before construction begins bull A Pre-notification Application must be submitted documenting the Owners intention to

seek Whole Building Systems incentives bull The Owner must confirm the goals and energy efficiency strategies being pursued by the

design team on the completed Pre-notification Worksheet (Checklist tab) and in the project Summary (Whole Building Performance Summary tab)

bull Submit executable building modeling software files bull Submit the Whole Building Performance Summary worksheet energy simulation model

inputs and outputs and supporting documentation bull Receive confirmation and eligibility notification from the PECO Smart Ideas team and

receive an incentive reservation bull The final incentive paid may differ from the reserved incentive amount The final

incentive will be calculated based on site-verified equipment installation and performance The Owners final application and complete documentation must be received within 6 months of equipment installation or certificate of occupancy whichever is later

bull An executable energy model and model output demonstrating compliance with the criteria of ASHRAE 901-2007 Appendix G will be required and the equipment data sheets LED lighting fixtures must be on the DLC or Energy STAR qualified products list (QPL) to be eligible LED fixtures not on the DLC or Energy STAR QPL has the option of submitting LM79 and LM80 test reports for evaluation against DLC and Energy STAR eligibility criteria

During the construction period bull Owner and design team continue to work closely with their chosen contractor to assure

energy efficiency measures are included and installed in the completed building

When the building is constructed and operational bull Complete the Owner final application Request an equipment verification site visit by the

PECO Smart Ideas team Equipment must be installed and fully operational o Program staff will schedule a site visit and utilize submitted documentation and

measurement tools to verify that the installation follows the submitted energy simulation model

bull When PECO confirms that there are no significant changes to the installed equipment payment of the reserved incentive will be made to the Owner within 6 weeks

bull If changes from the proposed design energy simulation are found the Owner and design team will be notified of the reduced incentive amount a period of 20 calendar days will

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 44

Improvement Incentive per Sq Ft

over Code

~11 to lt20 $0155

~20 to lt30 $0233

~30 to lt40 $0350

~40 to lt60 $0525

~60 $0700

be allowed for supplemental information to be provided if no additional information is received by PECO Smart Ideas team the reduced incentive payments will be made and sent to the Owner if additional clarification and information is available program staff will work diligently to resolve the discrepancies and arrive at a reasonable incentive adjustment with the customer

Payments made by PECO Smart Ideas are final

Customer Eligibility The Owner of the proposed new building project must be a customer of PECO and receive delivery of electric service from PECO to receive kilowatt-hour based incentives Please note that electricity supply can be provided by any vendor

Project Eligibility bull The project must be a new construction or major renovation Major renovations involving

the removal and redesign of at least two building systems (such as interior lighting and mechanical systems) may apply for Whole Building Systems incentives

bull To qualify for incentives projects must demonstrate energy efficiency enhancements that achieve at least 11 improvement in the proposed design versus the standard baseline

bull The Owner must submit a Pre-approval Application to the program at the stage where changes for increased energy efficiency are still feasible and construction has not been completed

bull Projects receiving Whole Building Systems incentives are not eligible to receive other incentives such as the prescriptive or custom program incentives for the same scope

bull Project components that are NOT eligible for consideration as a basis for PECO Smart Ideas include the following o Alternative fuel sources (eg use of gas or oil equipment in lieu of electric) Please note

that combined heat and power (CHP) systems will be incentivized for the electricity they produce

o Renewable energy sources (eg solar wind biomass) bull Ineligible savings include exterior lighting process receptacle miscellaneous loads and

other unregulated end-uses Custom incentives are available for new construction exterior lighting

Whole Building Systems Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 45

Custom Project Specifications Instructions for Energy Savings Calculations for Custom Projects Custom projects must involve measures that result in a reduction in electric energy use (kWh) Electricity savings may result from either efficiency improvements or fuel switching Custom Incentives are based on the first year kilowatt-hour savings Custom applications must be accompanied by detailed engineering calculations that document the annual total energy savings

The following serve as guidelines for the minimum required documentation

Equipment Information Submittals bull A list of the present and proposed equipment and components to be installed

including manufacturerrsquos catalogmodel number bull Manufacturerrsquos specification sheets showing capacities and performance for all major

components

Energy Savings Calculations Provide calculations documenting the predicted energy consumption of the existing (or baseline) and proposed system using appropriate analytical tools and clearly stated assumptions Calculations may be performed by ldquohandrdquo but spreadsheet analysis or more rigorous modeling is preferred All analysis should be provided in electronic format All assumptions such as operating hours existing and proposed equipment operational details must be presented Engineering algorithms and procedures from recognized technical organizations such as ASHRAE SMACNA ANSI etc must be used Use rated performance factors tested under accepted procedures specified by recognized rating agencies such as AHRI ANSI ASTM etc Provide an explanation when equipment performance rating conditions vary from standard conditions

In support of the calculations extensive documentation must be provided that provides the basis for the savings estimates The documentation must provide information on the equipment operating schedule daily and seasonal load profile and baseline AND energy efficient equipment performance at the operating loads Typical documentation for custom projects often includes bull Engineering or architectural drawings and ldquoequipment schedulerdquo sheets bull Component specification sheets that include part load efficiency or performance

factors bull Spreadsheet calculations or inputoutput files and results from system modeling or

other engineering analysis using accepted engineering algorithms and practices bull Log sheets trend logs from a building management system or other operating

documentation that are often necessary to document operating hours and equipment loading and used as a basis for the calculations (in some cases short term monitoring may be required to document the load profile)

bull Control sequence of operations that are necessary where controls play a part in the savings equation

Additional documentation other than that described in the application may be required for program participation Larger projects may also require pre- and post-project sub metering or monitoring of loads andor power input as part of another measurement and verification activity to demonstrate the actual energy savings that are realized

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 46

Baseline for Custom Analysis Where equipment is replaced prior to the end of its rated service life in order to achieve energy savings the existing equipment performance may be used as the baseline in the energy savings calculations Where equipment is replaced due to failure or for other reasons (such as obsolescence or a need for more capacity) the baseline performance used in the savings calculation should be either the minimum performance that would be required by code for that equipment type and application (where a code applies) or the performance of the equipment that would have been selected as the customers standard practice when a code does not apply

Baseline or Existing System Summary On custom worksheet on application form include make model number name plate information (such as operating voltage and rated full load amps) rated capacity quantities equipment condition and age facility operating hours equipment operating schedule and load curves If needed attach separate sheets

All decisions regarding incentives for custom projects are in the sole discretion of PECO

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 47

APPENDIX PROGRAM UPDATES SUMMARY (Q1 2017) Multifamily Nursing Home and Assisted Living retrofit customers need to apply for incentives through the PECO Smart Ideas Multi-Family Program administered by Franklin Energy For more information please contact Taylor Adler at tadlerfranklinenergycom or call 1-844-4BIZ-SAVE Multifamily Nursing Home and Assisted Living new construction customers can proceed with applying for incentives here

Revised Incentives

Data Centers

Measure Incentive Effective Immediately Previous Incentive

Air-cooled chiller for data centers $40ton $10ton Air-cooled chiller without condenser for data centers $20ton $10ton

Computer room air conditioner $30ton $7ton Water-cooled centrifugal chiller for data centers $30ton $5ton Water-cooled positive displacement or reciprocating chiller for data centers

$30ton $5ton

Uninterruptible power supply 20-100 kVA $10kVA $6kVA Uninterruptible power supply gt100 kVA $10kVA $1kVA Mainframe refresh $20kW installed $5kW installed Server refresh $20kW installed $4kW installed Server virtualization $400kW reduction $4kW reduction Thin clients $5units $4units

Lighting (Effective Immediately)

Measure Incentive Effective Immediately Specification Previous

Incentive Specification

New construction exterior LED outdoor flood light LED parking garage and canopy lighting LED polearm mounted parking and roadway lighting LED wall mount fixture

$005kWh (custom)

Lighting Power Density (LPD) Requirements Unchanged

$10-54 fixture

Lighting Power Density (LPD) (Wft2) by Space Type or Building Area

LED Replacement Lamps (Tubes) 2

$250lamp 5 Min Watts Reduced

$250lamp 6 Min Watts Reduced

LED Replacement Lamps (Tubes) 4

$400lamp 10 Min Watts Reduced

$400lamp 12 Min Watts Reduced

Permanent Fixture Removal $010Watt removed

Clarification of calculation to represent actual Wattage removed

$010Watt removed

Lighting (Effective 6117)

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 48

Measure Incentive Effective 6117 Specification Previous

Incentive Previous Specification

Interior LED high-bay fixtures andor retrofit kits if lt 20000 LED Lumens

$50fixture 150 Min Watts Reduced

$75fixture 150 Min Watts Reduced

Interior LED high-bay fixtures andor retrofit kits if gt 20000 LED Lumens

$75fixture 225 Min Watts Reduced

$75fixture 150 Min Watts Reduced

New Incentives

Compressed Air

Measure New Incentive Effective Immediately Variable speed air compressor $30compressor HP Compressed air system optimization $50compressor HP

HVAC

Measure New Incentive Effective Immediately ECM circulation pump $50pump Retro-commissioning cooling systems $750ton Retro-commissioning whole building $010square foot Energy management system $25ton Demand controlled ventilation $25ton Water-cooled air conditioner $22ton

Food Service

Measure New Incentive Effective Immediately Combination oven $200unit ENERGY STARreg commercial convection oven $150unit ENERGY STARreg commercial fryers $100unit ENERGY STARreg commercial hot holding cabinet $200unit

Refrigeration

Measure New Incentive Effective Immediately Air-cooled refrigeration condenser $10ton Oversized condenser with VFD $10ton Case light occupancy controls $750door

Lighting

Measure New Incentive Effective Immediately Interior central lighting controls $00175sq foot

Motors and Drives

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 49

-

Measure New Incentive Effective Immediately VFD for dust collection system motor $50HP

Application Clarifications and Revised Requirements

Clarification of LED Eligibility for New Construction or Retrofit Projects

LED Eligibility is determined by whether lighting products are listed in either the DesignLights Consortium (DLC) Qualified Products List of commercial-grade LED luminaires or the US Environmental Protection Agency database of ENERGY STAR certified products For products not yet listed contractors may submit LM79 and LM80 test reports PECO Smart Ideas engineers will review test reports to determine if the product in question meets performance specifications

Revised W 9 Requirement

W-9 forms EIN numbers are no longer required

Deletion of erroneous statement in New Construction Lighting

The following statement from previous Business Manual has been deleted ldquoThe minimum lighting power density used to calculate the incentive shall be no lower than 50 of the ASHRAE 901-2007 valuerdquo

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 50

  • Commercial amp Industrial Program Application Manual
    • Follow This Easy Process
      • Pre-Approval Application Checklist
      • Final Application Checklist
          • Terms and Conditions
            • Program Effective Dates
            • Program and Project Eligibility
            • Incentive Payment Limits
            • Application Review Process
            • Inspections andor PUCrsquos Statewide Program Evaluation
            • Requirements for Custom Project Electricity Savings Calculation
            • Tax Liability
            • No Endorsement
            • Warranties
            • Limitation of Liability
            • Assignment
            • Customerrsquos Certification
            • Termination
            • Acknowledgement
              • Retrofit Lighting Solutions
                • General Linear Fluorescent Lamp and Ballast Specification Requirements
                • LED Lamps and Fixtures
                • Minimum Watts Reduced
                • Linear LED (Tubes)
                • Permanent Fixture Removal
                  • LED Traffic Signals
                    • LED Traffic Signals Incentive Table
                      • New Construction Lighting Specifications
                        • New Construction Lighting Incentives Table
                          • New Construction Lighting Power Density Code
                              • Exterior New Construction Lighting
                              • HVAC Equipment
                                • Air-Source Air Conditioners and Air-Source Heat Pumps
                                • Package Terminal Systems (Replacements)
                                • Ductless Mini-Split Heat Pump lt54 Tons
                                • Geothermal Heat Pump
                                  • Other HVAC Equipment
                                    • Hotel Guest Room Occupancy Sensor
                                    • ECM Circulation Fan
                                    • ECM Circulation Pump
                                    • Retrocomissioning Cooling Systems
                                    • Retrocomissioning Whole Building
                                    • Energy Management System
                                    • Demand Controlled Ventilation
                                    • Other HVAC Incentives Table
                                      • Unitary HVAC Chillers
                                        • Air-Cooled Chillers Water Cooled Positive Displacement Reciprocating Chillers and Water Cooled Centrifugal Chillers
                                          • Refrigeration
                                            • Anti-Sweat Heater Controls
                                            • Evaporator Fan Controls
                                            • Floating Head Pressure Controls
                                            • Automatic Door Closers for Walk-In Coolers and Freezers
                                            • EC Motor for Walk-inReach-in Refrigerated cases or Freezer cases
                                            • ENERGY STAR Solid Door Freezer and Glass Door Freezer and Refrigerators
                                            • Refrigeration Suction Pipe Insulation
                                            • Night Cover
                                            • Strip Curtain on Walk-In CoolerFreezer
                                            • Evaporator Coil Defrost Control
                                            • Variable Speed Refrigeration Compressor
                                            • Add Doors to Open Refrigerated Cases
                                            • Door Gaskets
                                            • Zero Energy Doors
                                            • Air Cooled Refrigeration Condenser
                                            • Oversized Condenser with VFD
                                            • Case Light Occupancy Controls
                                            • LED Open Case Lighting
                                            • LED Enclosed Case Lighting Refrigerated
                                            • LED Enclosed Case Lighting Freezer
                                              • Food Service
                                                • Beverage and Snack Machine Controls
                                                • ENERGY STARreg Refrigerated Beverage Vending Machines
                                                • ENERGY STARreg Electric Steam Cooker
                                                • ENERGY STARreg Electric Combination Oven
                                                • ENERGY STARreg Commercial Convection Oven
                                                • ENERGY STARreg Commercial Fryers
                                                • ENERGY STARreg Commercial Hot Holding Cabinet
                                                  • Motors and Variable Frequency Drives
                                                    • Early Replacement Motors
                                                    • Variable Frequency Drives on HVAC Fan Applications
                                                    • Variable Frequency Drives on Pump Applications
                                                    • Variable Speed Control for Kitchen Exhaust Hoods
                                                    • Variable Speed Drives for Process or Other Equipment
                                                      • Domestic Hot Water
                                                        • Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater
                                                        • Heat Pump Water Heater
                                                        • Low Flow Pre-Rinse Spray Valve
                                                        • Domestic Hot Water Incentive Table
                                                          • Compressed Air Systems
                                                            • No-loss Condensate Drain
                                                            • Air-Entraining air nozzle
                                                            • Storage Tanks for LoadNo Load Screw Compressors
                                                            • Cycling Refrigerated Thermal Mass Dryer
                                                            • Variable Speed Air Compressor
                                                            • Compressed Air System Optimization
                                                            • Compressed Air Systems Incentive Table
                                                              • Data Centers
                                                                • Air Cooled Chiller
                                                                • Air Cooled Chiller without Condenser
                                                                • Computer Room Air Conditioner
                                                                • Computer Room Air Handler Variable Speed
                                                                  • Replacing constant speed CRAH with VSD CRAH
                                                                    • Water Cooled Centrifugal Chiller
                                                                    • Water Cooled Positive Displacement or Reciprocating Chiller
                                                                    • Uninterruptible Power Supply
                                                                    • Mainframe Refresh
                                                                    • Server Refresh
                                                                      • Whole Building Systems
                                                                        • Whole Building Systems Approach
                                                                        • How to Apply for Whole Building Systems Incentives
                                                                        • Customer Eligibility
                                                                        • Project Eligibility
                                                                        • Whole Building Systems Incentives Table
                                                                          • Custom Project Specifications
                                                                            • Instructions for Energy Savings Calculations for Custom Projects
                                                                            • Equipment Information Submittals
                                                                            • Energy Savings Calculations
                                                                            • Baseline for Custom Analysis
                                                                            • Baseline or Existing System Summary

Refrigeration

Anti-Sweat Heater Controls Incentives are offered for devices that sense the relative humidity in the air outside of the display case and cycles or turns off the glass door (if applicable) and frame anti-sweat heaters when the ambient dew point is below a preset set point Technologies that can turn off anti-sweat heaters based on sensing condensation (on the inner glass pane) also qualify Incentive is based on the number of doors

Evaporator Fan Controls This measure is for the installation of controls in medium temperature walk-in coolers The controller reduces airflow of the evaporator fans when there is no refrigerant flow The measure must control a minimum of 120 HP where fans operate continuously at full speed The measure also must reduce fan motor power by at least 75 during the off cycle This measure is not applicable if any of the following conditions apply 1) Compressor runs all the time with high duty cycle 2) Evaporator fan does not run at full speed all the time 3) Evaporator fan motor runs on poly-phase power 4) Evaporator fan motor is not shaded-pole or permanent split capacitor (PSC) 5) Evaporator fan does not use off-cycle or time-off defrost

Floating Head Pressure Controls Controls must vary head pressure to adjust condensing temperatures in relation to outdoor air temperature Must replace existing constant pressure or manually controlled systems to achieve reduced head pressure in order to maintain a minimum saturated condensing temperature of 70 degF or a 20 degF variance below design heat pressure during mild weather conditions Compressor size must be at least 5 HP

Automatic Door Closers for Walk-In Coolers and Freezers The auto-closer should be applied to the main insulated opaque door(s) of a walk-in cooler or freezer The auto-closer must be able to firmly close that door when it is within one inch of full closure This must be a newly installed automatic door closer replacements on previously installed door closers are not eligible for an incentive

EC Motor for Walk-inReach-in Refrigerated cases or Freezer cases Incentives are offered for replacement of an existing standard-efficiency shaded-pole or permanent split capacitor evaporator fan motor in refrigerated display cases or fan coil in walk-ins The replacement unit must be an Electronically Commutated Motor (ECM) This measure cannot be used in conjunction with the Evaporator Fan Controller measure

ENERGY STAR Solid Door Freezer and Glass Door Freezer and Refrigerators Incentives are offered for replacement of existing self-contained refrigerators and freezers with units that are ENERGY STARreg listed Only units with built-in refrigeration systems are qualified Units with remote refrigeration systems or units do not qualify Customers must provide proof that the appliance meets the CEE or ENERGY STAR efficiency specifications using ASHRAE Standard 72-2005 (38degF plusmn 2degF) Incentive is per unit

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 32

Refrigeration Suction Pipe Insulation 1 Must insulate bare refrigeration suction lines of 1 58 inches in diameter or less on existing equipment only 2 Cooler lines require frac34 inch of flexible closed-cell nitrite rubber or an equivalent insulation 3 Freezer lines require 1-inch of flexible closed-cell nitrite rubber or an equivalent insulation 4 Insulation exposed to the outdoors must be protected from the weather (ie jacketed with a medium-gauge aluminum jacket)

Night Cover 1 Must install a cover on an existing open refrigerated display case to decrease its cooling load during off hours 2 The equipment manufacturer must not object to the use of night covers for the existing display case model 3 This rebate is based on the linear footage of the installed 4 The cover must be applied for a period of at least six hours

Strip Curtain on Walk-In CoolerFreezer 1 New strip curtains or plastic swinging doors must be installed on doorways of refrigerated spaces (conditioned to less than 50deg F) 2 Rebate is based on the linear footage of the doorway that the strip curtains are being installed in 3 Opening between the strip curtain and bottom of doorway must be no larger than 1 inch 4 Strips must have an overlay greater than 1 inch

Evaporator Coil Defrost Control 1The current system must include an operating electric defrost system with a functional electroshymechanical time clock 2 Evaporator coil temperature and pressure must be monitored by controller in order to determine optimal defrost cycles 3 New intelligent control systems to control the defrost systems will typically replace timed- defrost controls

Variable Speed Refrigeration Compressor This measure VSD control for refrigeration systems and its eligibility targets applies to retrofit construction in the commercial and industrial building sectors it is most applicable to grocery stores or food processing applications with refrigeration systems This protocol is for a VSD control system replacing a slide valve control system

Add Doors to Open Refrigerated Cases The eligible retrofit equipment is either no sweat doors or doors with anti-sweat heaters If a lighting retrofit is included with the new doors it must consume the same amount of energy or less energy than the old lighting Upgrades to lighting or other system components should be processed separately Horizontal cases are not eligible and should be processed as custom

Door Gaskets PECO Smart Ideas For Your Business CampI Program Application Manual

Q1 2017 pg 33

This measure is applicable to commercial refrigeration and applies to the replacement of worn-out gaskets with new better-fitting gaskets Applicable gaskets include those located on the doors of walk-in andor reach-in coolers and freezers This protocol applies to the main doors of both low temperature (ldquofreezerrdquo ndash below 32 degF) and medium temperature (ldquocoolerrdquo ndash above 32 degF) walk-ins

Zero Energy Doors For this measure a no-heatlow-heat clear glass door must be installed on an upright display case It is limited to door heights of 57 inches or more Doors must have either heat reflective treated glass be gas filled or both This measure applies to low temperature cases onlymdashthose with a case temperature below 0degF Doors must have 3 or more panes Total door rail glass and frame heater amperage ( 120 volt) cannot exceed 039413 amps per door for low temperature display cases Rebate is based on the door width (not including case frame)

Air Cooled Refrigeration Condenser Approach temperature lt8F for low temperature loads lt13F for medium temperature loads

Oversized Condenser with VFD New standalone condenser must no more than 150 larger than load

Case Light Occupancy Controls Acceptable for freezer or refrigerated cases as well as open cases or cases with doors

LED Open Case Lighting For replacing open case T8 or T12 fluorescent fixtures with DLC listed LEDs on refrigerators coolers and freezers

LED Enclosed Case Lighting Refrigerated LED case lighting with or without motion sensors on enclosed refrigerated vertical displays The baseline equipment is assumed to be cases with uncontrolled T8 or T12 linear fluorescent lamps

LED Enclosed Case Lighting Freezer LED case lighting with or without motion sensors on enclosed freezer vertical displays The baseline equipment is assumed to be cases with uncontrolled T8 or T12 linear fluorescent lamps

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 34

Refrigeration Measures Ref Measure

Measure Incentive Unit IncentiveUnit Code R01 Anti-Sweat Heater Controls Door $30

R02 Evaporator Fan Controls Controller $50

R03 Floating-head Pressure Controls HP $20

R04 Automatic Door Closers fo r Walk-in Coolers Door $75

R05 Automatic Door Closers fo r Walk-in Freezers Door $75

R06 Evaporator Fan EC Motor fo r Reach- in Cases Motor $35

RO Evaporator Fan EC Motor fo r Walk-in Cases Motor $50

R08 ENERGY STARreg Glass Door Freezer lt15 Cu Ft Unit $100

R09 ENERGY STARreg Glass Door Freezer 15- 49 Cu Ft Unit $125

R10 ENERGY STARreg Glass Door Freezer ~ 50 Cu Ft Unit $145

R11 ENERGY STARreg Solid Door Freezer Unit $75

R12 ENERGY STARreg Glass Door Refrigerator lt50 Cu Ft Unit $30

R13 ENERGY STARreg Glass Door Refrigerator gt= 50 Cu Ft Unit $50

K14 t NtKGY ~ I AKreg ~Olld Uoor Ketngerator $ OU Cu t-t Unit $~0

R15 Suction Pipe Insulation Walk-in Coolers Linear Foot $050

R16 Suction Pipe Insulation Walk in Freezers Linear Foot $075

R17 Night Cover Linear Foot $800

R18 Strip Curtains on Walk-in Cooler Linear Foot $250

R19 Evaporator Coil Defrost Control Controller $7500

R20 Variable Speed Refrigeration Compressor Compressor $85

R21 Add Doors to Open Refrigerated Cases Door $55

R22 Door Gaskets Door $250

R23 Zero Energy Doors Door $50

R24 A ir Cooled Refrigeration Condenser Ton $10

R25 Oversized Condenser with VFD Ton $10

R26 Case Light Occupancy Controls Door $8

R27 LED Open Cose Lighting Cose $10

R28 LED Enclosed Case Lighting Refrigerated Door $30

R30 LED Enclosed Case Lighting Freezer Door $30

Refrigeration Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 35

Food Service Beverage and Snack Machine Controls Incentives are offered for refrigerated vending machines that contain non-perishable bottled and canned beverages Controller for both types of systems must include a passive infrared occupancy sensor to turn off fluorescent lights and other energized machine systems when the surrounding area is unoccupied for 15 minutes or longer For the refrigerated machines the control logic may include periodic power up at 2-hour intervals or longer to maintain product temperature and provide compressor protection

ENERGY STARreg Refrigerated Beverage Vending Machines Incentives are offered for ENERGY STARreg beverage vending machines Qualifying machines can be found at httpswwwenergystargovproductsothervending_machines

ENERGY STARreg Electric Steam Cooker This measure applies to the installation of electric ENERGY STAR steam cookers as either a new item or replacement for an existing unit Gas steam cookers are not eligible The steam cookers must meet minimum ENERGY STAR efficiency requirements A qualifying steam cooker must meet a minimum cooking efficiency of 50 percent and meet idle energy rates specified by pan capacity

ENERGY STARreg Electric Combination Oven This measure applies to electric ovens capable of handling single 12 x 20 x 25 pan per rack

ENERGY STARreg Commercial Convection Oven The oven must meet or exceed heavy load potato cooking energy efficiency of greater than 70 utilizing ASTM Standard F149 Applies only to electric ovens

ENERGY STARreg Commercial Fryers The commercial fryer must have a tested heavy load (French fry for large vats) cooking energy efficiency of greater than 80 utilizing American Society for Testing and Materials (ASTM) Standard F1361 for commercial fryers and ASTM Standard F2144 for large vat fryers Multiple vat configurations are paid per qualifying vat ENERGY STAR maintains a list of qualifying products and specifications at httpwwwenergystargov

ENERGY STARreg Commercial Hot Holding Cabinet Energy STAR rating electric

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 36

Food Service amp Other Measures FoodOther

Measure Incentive Unit Incentive

Measure Code Unit

F01 Beverage Machine Controls Unit $25

F02 Snack Machine Controls Unit $20

F03 ENERGY STARreg Refrigerated Beverage Vending Machir Unit $125

F04 ENERGY STARreg Commerc ial Steam Cooker Unit $200

F05 ENERGY STARreg Electric Combination Oven Unit $200

F06 ENERGY STARreg Commercial Electric Convection Oven Unit $150

F07 ENERGY STARreg Commerc ial Fryers Unit $100

F08 ENERGY STARregCommerc ial Hot Holding Cabinet Unit $200

Food Service Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 37

Motors and Variable Frequency DrivesEarly Replacement Motors For constant speed and uniformly loaded motors this measure applies to the replacement of old motors with new energy efficient motors of the same rated horsepower Old motors must be less than 15 years Replacements where the old motor and new motor have different horsepower ratings are considered custom measures Motors with variable speeds variable loading or industrial-specific applications are also considered custom measures

Motors Incentive Table Motors

Measure Code

HP Incentive per Motor

M01 15 - 10 $40 M02 11 - 50 $100 M03 51-100 $150 M04 gt100 $300

Only VFDs on unitary systems are eligible Non-unitary systems must be submitted as a custom measure Soft start motors are not eligible

Variable Frequency Drives on HVAC Fan Applications Incentives are offered for installing VFDs on existing HVAC fans that do not have pre-existing VFDs This measure applies to HVAC supply and return fans only All other fans including cooling tower fans must be submitted as custom measures Manually fixed speed settings on HVAC fans must be submitted via custom application The VFD must control motor speed automatically in response to pressure flow temperature or other variable signal The installation of a VSD must accompany the permanent removal or disabling of any throttling devices such as inlet vanes bypass dampers and throttling valves etc The incentive is offered per controlled HP

Variable Frequency Drives on Pump Applications Incentives are offered for installing VFDs on existing chilled water pumps and heating hot water pumps that do not have existing VFDs This measure applies to chilled water pumps and heating hot water pumps only All other pumps must be submitted as custom measures Manually fixed speed settings on pumps must be submitted via custom application The VFD must control motor speed automatically in response to pressure flow temperature or other variable signal The installation of a VSD must accompany the permanent removal or disabling of any throttling devices such as throttling valves The incentive is offered per controlled HP

Variable Speed Control for Kitchen Exhaust Hoods The measure consists of installing a new VSD in conjunction with a sensor control system that varies the exhaust rate of kitchen ventilation (exhaust andor makeup air fans) based on the heat and effluent output from the cooking appliances (ie the more heat and smokevapors generated the more ventilation needed) This involves installing a temperature sensor in the hood exhaust collar andor an optic sensor on the end of the hood that senses cooking conditions and allows the system to automatically vary the rate of exhaust to match requirements by adjusting the fan speed accordingly

Variable Speed Drives for Process or Other Equipment VFD must be used in conjunction with a process (non HVAC) application To qualify for this incentive the driven equipment must operate at least 2000 hours per year Redundant or back- up units do not qualify VFDs replacing existing VFDs do not qualify The VFD must control motor

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 38

speed automatically in response to pressure flow temperature or other variable signal VFDs installed as ldquosoft startrdquo without automatic manual closed loop speed control do not qualify The installation of a VFD must accompany the permanent removal or disabling of any throttling devices such as throttling valves The incentive is per controlled HP and only applies to controlled motors less than 50 HP

VSDVFD Incentives Table VFD

Measure Code

Measure Unit Incentive per Unit

Fan Application

V01 VFD on HVAC Fan HP $25 Pump Application

Variable Speed Control for Kitchen Exhaust Hoods

Variable Speed Drives for Process or Other Equipment

V02 VFD on Chilled Water Pumps HP $25 V03 VFD on Heating Hot Water Pumps HP $25

V04 Kitchen Exhaust Fan Retrofit Hood HP $500

V05 Process Motor lt 50 HP HP $50

Domestic Hot Water Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater This measure documents the energy savings attributed to converting from a standard electric water heater to an ENERGY STAR natural gaspropane-fired water heater or a standard oil-fired water heater with an Energy Factor of 0585

Heat Pump Water Heater This includes heat pump water heaters with energy factors meeting ENERGY STAR criteria The measure described here involves a direct retrofit of a resistive electric water heater with a heat pump water heater It does not cover systems where the heat pump is a pre-heater or is combined with other water heating sources More complicated installations can be treated as custom projects

Low Flow Pre-Rinse Spray Valve This measure applies to efficient low flow pre-rinse sprayers in grocery and food service applications The most likely areas of application are kitchens in restaurants and hotels Only premises with electric water heating may qualify for this incentive In addition the replacement pre-rinse spray nozzle must use less than 16 gallons per minute with a cleanability performance of 26 seconds per plate or less Low flow pre-rinse sprayers reduce hot water usage and save energy associated with water heating

Domestic Hot Water Incentive Table

Measure Code Measure Unit Retrofit Incentive per

Unit

W01 Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater Unit $100

W02 Heat Pump Water Heater Unit $100 W03 Low-Flow Pre-Rinse Spray Valve Valve $17

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 39

Compressed Air SystemsNo-loss Condensate Drain No-loss Condensate Drains are controlled by a sensor that monitors the level of condensate and only open when there is a need to drain condensate They close before compressed air is allowed to escape This measure is targeted to non-residential customers whose equipment is a timed drain that operates on a pre-set schedule Acceptable baseline conditions are compressed air systems with standard condensate drains operated by a solenoid and timer

Air-Entraining air nozzle This measure is targeted to non-residential customers whose compressed air equipment uses stationary air nozzles in a production application with an open copper tube of 18rdquo or 14rdquo orifice diameter Energy efficient conditions require replacement of an inefficient non-air entraining air nozzle with an energy efficient air-entraining air nozzle that use less than 15 CFM at 100 psi for industrial applications

Storage Tanks for LoadNo Load Screw Compressors This measure protocol applies to the installation of air receivers with pressureflow controls to loadno load compressors Loadno load compressors unload when there is low demand The process of unloading is done over a period of time to avoid foaming of the lubrication oil Using a storage tank with pressureflow control will buffer the air demands on the compressor Reducing the number of cycles in turn reduces the number of transition times from load to no load and saves energy The baseline equipment is a loadno load compressor with a 1 galcfm storage ratio or a modulating compressor with blowdown The high efficiency equipment is a loadno load compressor with a minimum storage ratio of 4 gallons of storage per cfm

Cycling Refrigerated Thermal Mass Dryer When air is compressed water vapor in the air condenses and collects in liquid form Some of this condensate collects in the air distribution system and can contaminate downstream components such as air tools with rust oil and pipe debris Refrigerated air dryers remove the water vapor by cooling the air to its dew point and separating the condensate Changes in production and seasonal variations in ambient air temperature lead to partial loading conditions on the dryer Standard air dryers use a hot gas bypass system that is inefficient at partial loads A Cycling Thermal Mass Dryer uses a thermal storage medium to store cooling capacity when the system is operated at partial loads allowing the dryer refrigerant compressor to cycle

This measure is targeted to non-residential customers whose equipment is a non-cycling refrigerated air dryer with a capacity of 600 cfm or below Acceptable baseline conditions are a non-cycling (eg continuous) air dryer with a capacity of 600 cfm or below The replacement of desiccant deliquescent heat-of-compression membrane or other types of dryers does not qualify under this measure

Variable Speed Air Compressor This type of compressor uses a special drive to control the speed (RPM) of the unit which in turn saves energy compared to a fixed speed equivalent

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 40

No-loss Condensate Drain Air-Entraining Air Nozzle Cycling Refrigerated Thermal Mass Dryer

Compressor Incentive per

Equipment Type Units Quantity Daily Operating Unit

Hours

CA04 Storage Tanks for LoadNo Load Screw

Compressor HP $10 Compressors

CA05 Variable Speed Air Compressor

Compressor HP $30

CA06 Compressed Air System Optimization

Compressor HP $50

Compressed Air System Optimization The submitted optimization measures must be identified in an Air System Audit or equivalent study to be eligible The measures must demonstrate energy savings as evaluated by a Program Engineer Additionally measures must also fall under one or more of the category below to be eligible

1) Install storage Receivers (new receivers only replacing existing storage receivers are ineligible)

2) Compressor control (must demonstrate improvement in partial load efficiency of the compress air system including reduceeliminate partially loaded units)

3) Dryer control 4) Source pressure reduction 5) Right-sizing distribution components such as piping filters regulators

connectors and hoses (routine maintenance replacements are ineligible) 6) Leakage detection and repair 7) Eliminate low-efficiency end-usages of compressed air 8) Heat recovery (most reduce electricity consumption of the replaced heat source)

Compressed Air Systems Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 41

lt65000 Btuh

~ 65000 Btuh and lt135000 Btuh

135000 Btuhand lt240000 Btuh

240000 Btuh and lt760000 Btuh

760000 Btuh

154

142

135

125

123

Chiller Capacity Path APath B efficiency (kWton )

lt 150 tons

~150 tons and lt300 tons

300 tons and lt400 tons

400 tons and lt600 tons

600 tons

lt75 tons

~75 tons and lt150 tons

~150 tons and lt300 tons

~300 tons and lt600 tons

600 tons

0610 FU0695 FL and 0550 IPLV0440 IPLV

0610 FU0635 FL and 0550 IPLV0400 IPLV

0560 FU0595 FL and 0520 IPLV0390 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

Path APath B efficiency (kWton )

0750 FU0780 FL and 0600 IPLV0500 IPLV

0720 FU0750 FL and 0560 IPLV0490 IPLV

0660 FU0680 FL and 0540 IPLV0440 IPLV

0610 FU0625 FL and 0520 IPLV0410 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

Data Centers Data Center incentives are available for facilities ranging in size from office server closets to large standalone facilities

Air Cooled Chiller Path APath B EER (BtuWh) lt150 tons 101 FL97 FL and 137 IPLV158 IPLV ge150 tons 101 FL97 FL and 140 IPLV161 IPLV

Air Cooled Chiller without Condenser Air-cooled chillers without condenser must be rated with matching condensers and comply with air-cooled chiller efficiency requirements

Computer Room Air Conditioner

Computer Room Air Handler Variable Speed Replacing constant speed CRAH with VSD CRAH

Water Cooled Centrifugal Chiller

Water Cooled Positive Displacement or Reciprocating Chiller

Uninterruptible Power Supply Must be Energy Star Certified UPS or have full load efficiency rating

ge948 for 20-100 kVA ge978for ge100 kVA

Mainframe Refresh The rated efficiency of the replacement Mainframes power supply must be at least 8 more

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 42

- Equipment Type Units IncentiveUnit

D1 Air Cooled Chiller Ton $4000 D2 Air Cooled Chiller W ithout Condenser Ton $2000 D3 Computer Room Air Conditioner Ton $3000 D4 Computer Room Air Handler Variable Speed Ton $1000 D5 Water Cooled Centrifugal Chiller Ton $3000 D6 Water Cooled Positive Displacement or Reciprocatin $3000 D7 Uninterruptible Power Supply 20-100 kVA $1000 D8 Uninterruptible Power Supply gt 100 kVA $1000 D9 Mainframe Refresh $2000

D10 Server Refresh $2000 D11 PC Power Managment System $600 D12 HVAC System Optimization $005 D1 3 HoUCold Aisle Containment kWh saved $005 D14 Server Virtualization kW reduction $40000 D1 5 Thin Clients Units $500

efficient compared to the existing Mainframes power supply The replacement Mainframe if Inactive must be decommissioned and removed from the Data Center

Server Refresh Replacement servers must be ENERGY STARreg certified Replacement servers power supply must be 5 more efficiency compared to the power supply of the replaced servers The replaced server must be decommissioned and removed from the data center

HVAC System Optimization Final system must have these features

-Implementation of free cooling by the addition of an economizer system -Conversion of constant speed CRACCRAH into variable speed operations using VFDs and additional control functionalities and -Elevation of exhaust air temperature

HotCold Aisle Containment Includes both Hot and Cold Aisles Installing new containment measures not replacing already existed aisle containment Plenum-only installations not eligible Must result in higher difference between the return air (hot aisle) and supply air (cold aisle) temperatures measured at rack intake and exhaust locations

Server Virtualization Minimum of consolidating 5 Servers virtualized into one Server The virtualized servers if inactive are removed from the Data Center

Thin Clients Must be ENERGY STAR certified thin clients Decommissioned clients are removed from the Data Center

Data Center Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 43

Whole Building Systems Whole Building Systems Approach

The Whole Building Systems approach is intended to encourage integrated energy efficient designs by providing enhanced incentives to the customer who addresses overall energy performance Owners of eligible and qualifying new construction and major renovation projects can receive Whole Building Systems incentives when energy modeling indicates the projectrsquos performance is over 10 better than the ASHRAE 901-2007 Savings from eligible electric end-uses in kilowatt hours define the amount of financial incentive Energy savings achieved through renewable energy sources are not counted toward project energy savings and are not included in the savings basis Incentive reservations obtained during the design phase of a project will be honored for up to 24 months

How to Apply for Whole Building Systems Incentives Before construction begins bull A Pre-notification Application must be submitted documenting the Owners intention to

seek Whole Building Systems incentives bull The Owner must confirm the goals and energy efficiency strategies being pursued by the

design team on the completed Pre-notification Worksheet (Checklist tab) and in the project Summary (Whole Building Performance Summary tab)

bull Submit executable building modeling software files bull Submit the Whole Building Performance Summary worksheet energy simulation model

inputs and outputs and supporting documentation bull Receive confirmation and eligibility notification from the PECO Smart Ideas team and

receive an incentive reservation bull The final incentive paid may differ from the reserved incentive amount The final

incentive will be calculated based on site-verified equipment installation and performance The Owners final application and complete documentation must be received within 6 months of equipment installation or certificate of occupancy whichever is later

bull An executable energy model and model output demonstrating compliance with the criteria of ASHRAE 901-2007 Appendix G will be required and the equipment data sheets LED lighting fixtures must be on the DLC or Energy STAR qualified products list (QPL) to be eligible LED fixtures not on the DLC or Energy STAR QPL has the option of submitting LM79 and LM80 test reports for evaluation against DLC and Energy STAR eligibility criteria

During the construction period bull Owner and design team continue to work closely with their chosen contractor to assure

energy efficiency measures are included and installed in the completed building

When the building is constructed and operational bull Complete the Owner final application Request an equipment verification site visit by the

PECO Smart Ideas team Equipment must be installed and fully operational o Program staff will schedule a site visit and utilize submitted documentation and

measurement tools to verify that the installation follows the submitted energy simulation model

bull When PECO confirms that there are no significant changes to the installed equipment payment of the reserved incentive will be made to the Owner within 6 weeks

bull If changes from the proposed design energy simulation are found the Owner and design team will be notified of the reduced incentive amount a period of 20 calendar days will

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 44

Improvement Incentive per Sq Ft

over Code

~11 to lt20 $0155

~20 to lt30 $0233

~30 to lt40 $0350

~40 to lt60 $0525

~60 $0700

be allowed for supplemental information to be provided if no additional information is received by PECO Smart Ideas team the reduced incentive payments will be made and sent to the Owner if additional clarification and information is available program staff will work diligently to resolve the discrepancies and arrive at a reasonable incentive adjustment with the customer

Payments made by PECO Smart Ideas are final

Customer Eligibility The Owner of the proposed new building project must be a customer of PECO and receive delivery of electric service from PECO to receive kilowatt-hour based incentives Please note that electricity supply can be provided by any vendor

Project Eligibility bull The project must be a new construction or major renovation Major renovations involving

the removal and redesign of at least two building systems (such as interior lighting and mechanical systems) may apply for Whole Building Systems incentives

bull To qualify for incentives projects must demonstrate energy efficiency enhancements that achieve at least 11 improvement in the proposed design versus the standard baseline

bull The Owner must submit a Pre-approval Application to the program at the stage where changes for increased energy efficiency are still feasible and construction has not been completed

bull Projects receiving Whole Building Systems incentives are not eligible to receive other incentives such as the prescriptive or custom program incentives for the same scope

bull Project components that are NOT eligible for consideration as a basis for PECO Smart Ideas include the following o Alternative fuel sources (eg use of gas or oil equipment in lieu of electric) Please note

that combined heat and power (CHP) systems will be incentivized for the electricity they produce

o Renewable energy sources (eg solar wind biomass) bull Ineligible savings include exterior lighting process receptacle miscellaneous loads and

other unregulated end-uses Custom incentives are available for new construction exterior lighting

Whole Building Systems Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 45

Custom Project Specifications Instructions for Energy Savings Calculations for Custom Projects Custom projects must involve measures that result in a reduction in electric energy use (kWh) Electricity savings may result from either efficiency improvements or fuel switching Custom Incentives are based on the first year kilowatt-hour savings Custom applications must be accompanied by detailed engineering calculations that document the annual total energy savings

The following serve as guidelines for the minimum required documentation

Equipment Information Submittals bull A list of the present and proposed equipment and components to be installed

including manufacturerrsquos catalogmodel number bull Manufacturerrsquos specification sheets showing capacities and performance for all major

components

Energy Savings Calculations Provide calculations documenting the predicted energy consumption of the existing (or baseline) and proposed system using appropriate analytical tools and clearly stated assumptions Calculations may be performed by ldquohandrdquo but spreadsheet analysis or more rigorous modeling is preferred All analysis should be provided in electronic format All assumptions such as operating hours existing and proposed equipment operational details must be presented Engineering algorithms and procedures from recognized technical organizations such as ASHRAE SMACNA ANSI etc must be used Use rated performance factors tested under accepted procedures specified by recognized rating agencies such as AHRI ANSI ASTM etc Provide an explanation when equipment performance rating conditions vary from standard conditions

In support of the calculations extensive documentation must be provided that provides the basis for the savings estimates The documentation must provide information on the equipment operating schedule daily and seasonal load profile and baseline AND energy efficient equipment performance at the operating loads Typical documentation for custom projects often includes bull Engineering or architectural drawings and ldquoequipment schedulerdquo sheets bull Component specification sheets that include part load efficiency or performance

factors bull Spreadsheet calculations or inputoutput files and results from system modeling or

other engineering analysis using accepted engineering algorithms and practices bull Log sheets trend logs from a building management system or other operating

documentation that are often necessary to document operating hours and equipment loading and used as a basis for the calculations (in some cases short term monitoring may be required to document the load profile)

bull Control sequence of operations that are necessary where controls play a part in the savings equation

Additional documentation other than that described in the application may be required for program participation Larger projects may also require pre- and post-project sub metering or monitoring of loads andor power input as part of another measurement and verification activity to demonstrate the actual energy savings that are realized

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 46

Baseline for Custom Analysis Where equipment is replaced prior to the end of its rated service life in order to achieve energy savings the existing equipment performance may be used as the baseline in the energy savings calculations Where equipment is replaced due to failure or for other reasons (such as obsolescence or a need for more capacity) the baseline performance used in the savings calculation should be either the minimum performance that would be required by code for that equipment type and application (where a code applies) or the performance of the equipment that would have been selected as the customers standard practice when a code does not apply

Baseline or Existing System Summary On custom worksheet on application form include make model number name plate information (such as operating voltage and rated full load amps) rated capacity quantities equipment condition and age facility operating hours equipment operating schedule and load curves If needed attach separate sheets

All decisions regarding incentives for custom projects are in the sole discretion of PECO

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 47

APPENDIX PROGRAM UPDATES SUMMARY (Q1 2017) Multifamily Nursing Home and Assisted Living retrofit customers need to apply for incentives through the PECO Smart Ideas Multi-Family Program administered by Franklin Energy For more information please contact Taylor Adler at tadlerfranklinenergycom or call 1-844-4BIZ-SAVE Multifamily Nursing Home and Assisted Living new construction customers can proceed with applying for incentives here

Revised Incentives

Data Centers

Measure Incentive Effective Immediately Previous Incentive

Air-cooled chiller for data centers $40ton $10ton Air-cooled chiller without condenser for data centers $20ton $10ton

Computer room air conditioner $30ton $7ton Water-cooled centrifugal chiller for data centers $30ton $5ton Water-cooled positive displacement or reciprocating chiller for data centers

$30ton $5ton

Uninterruptible power supply 20-100 kVA $10kVA $6kVA Uninterruptible power supply gt100 kVA $10kVA $1kVA Mainframe refresh $20kW installed $5kW installed Server refresh $20kW installed $4kW installed Server virtualization $400kW reduction $4kW reduction Thin clients $5units $4units

Lighting (Effective Immediately)

Measure Incentive Effective Immediately Specification Previous

Incentive Specification

New construction exterior LED outdoor flood light LED parking garage and canopy lighting LED polearm mounted parking and roadway lighting LED wall mount fixture

$005kWh (custom)

Lighting Power Density (LPD) Requirements Unchanged

$10-54 fixture

Lighting Power Density (LPD) (Wft2) by Space Type or Building Area

LED Replacement Lamps (Tubes) 2

$250lamp 5 Min Watts Reduced

$250lamp 6 Min Watts Reduced

LED Replacement Lamps (Tubes) 4

$400lamp 10 Min Watts Reduced

$400lamp 12 Min Watts Reduced

Permanent Fixture Removal $010Watt removed

Clarification of calculation to represent actual Wattage removed

$010Watt removed

Lighting (Effective 6117)

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 48

Measure Incentive Effective 6117 Specification Previous

Incentive Previous Specification

Interior LED high-bay fixtures andor retrofit kits if lt 20000 LED Lumens

$50fixture 150 Min Watts Reduced

$75fixture 150 Min Watts Reduced

Interior LED high-bay fixtures andor retrofit kits if gt 20000 LED Lumens

$75fixture 225 Min Watts Reduced

$75fixture 150 Min Watts Reduced

New Incentives

Compressed Air

Measure New Incentive Effective Immediately Variable speed air compressor $30compressor HP Compressed air system optimization $50compressor HP

HVAC

Measure New Incentive Effective Immediately ECM circulation pump $50pump Retro-commissioning cooling systems $750ton Retro-commissioning whole building $010square foot Energy management system $25ton Demand controlled ventilation $25ton Water-cooled air conditioner $22ton

Food Service

Measure New Incentive Effective Immediately Combination oven $200unit ENERGY STARreg commercial convection oven $150unit ENERGY STARreg commercial fryers $100unit ENERGY STARreg commercial hot holding cabinet $200unit

Refrigeration

Measure New Incentive Effective Immediately Air-cooled refrigeration condenser $10ton Oversized condenser with VFD $10ton Case light occupancy controls $750door

Lighting

Measure New Incentive Effective Immediately Interior central lighting controls $00175sq foot

Motors and Drives

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 49

-

Measure New Incentive Effective Immediately VFD for dust collection system motor $50HP

Application Clarifications and Revised Requirements

Clarification of LED Eligibility for New Construction or Retrofit Projects

LED Eligibility is determined by whether lighting products are listed in either the DesignLights Consortium (DLC) Qualified Products List of commercial-grade LED luminaires or the US Environmental Protection Agency database of ENERGY STAR certified products For products not yet listed contractors may submit LM79 and LM80 test reports PECO Smart Ideas engineers will review test reports to determine if the product in question meets performance specifications

Revised W 9 Requirement

W-9 forms EIN numbers are no longer required

Deletion of erroneous statement in New Construction Lighting

The following statement from previous Business Manual has been deleted ldquoThe minimum lighting power density used to calculate the incentive shall be no lower than 50 of the ASHRAE 901-2007 valuerdquo

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 50

  • Commercial amp Industrial Program Application Manual
    • Follow This Easy Process
      • Pre-Approval Application Checklist
      • Final Application Checklist
          • Terms and Conditions
            • Program Effective Dates
            • Program and Project Eligibility
            • Incentive Payment Limits
            • Application Review Process
            • Inspections andor PUCrsquos Statewide Program Evaluation
            • Requirements for Custom Project Electricity Savings Calculation
            • Tax Liability
            • No Endorsement
            • Warranties
            • Limitation of Liability
            • Assignment
            • Customerrsquos Certification
            • Termination
            • Acknowledgement
              • Retrofit Lighting Solutions
                • General Linear Fluorescent Lamp and Ballast Specification Requirements
                • LED Lamps and Fixtures
                • Minimum Watts Reduced
                • Linear LED (Tubes)
                • Permanent Fixture Removal
                  • LED Traffic Signals
                    • LED Traffic Signals Incentive Table
                      • New Construction Lighting Specifications
                        • New Construction Lighting Incentives Table
                          • New Construction Lighting Power Density Code
                              • Exterior New Construction Lighting
                              • HVAC Equipment
                                • Air-Source Air Conditioners and Air-Source Heat Pumps
                                • Package Terminal Systems (Replacements)
                                • Ductless Mini-Split Heat Pump lt54 Tons
                                • Geothermal Heat Pump
                                  • Other HVAC Equipment
                                    • Hotel Guest Room Occupancy Sensor
                                    • ECM Circulation Fan
                                    • ECM Circulation Pump
                                    • Retrocomissioning Cooling Systems
                                    • Retrocomissioning Whole Building
                                    • Energy Management System
                                    • Demand Controlled Ventilation
                                    • Other HVAC Incentives Table
                                      • Unitary HVAC Chillers
                                        • Air-Cooled Chillers Water Cooled Positive Displacement Reciprocating Chillers and Water Cooled Centrifugal Chillers
                                          • Refrigeration
                                            • Anti-Sweat Heater Controls
                                            • Evaporator Fan Controls
                                            • Floating Head Pressure Controls
                                            • Automatic Door Closers for Walk-In Coolers and Freezers
                                            • EC Motor for Walk-inReach-in Refrigerated cases or Freezer cases
                                            • ENERGY STAR Solid Door Freezer and Glass Door Freezer and Refrigerators
                                            • Refrigeration Suction Pipe Insulation
                                            • Night Cover
                                            • Strip Curtain on Walk-In CoolerFreezer
                                            • Evaporator Coil Defrost Control
                                            • Variable Speed Refrigeration Compressor
                                            • Add Doors to Open Refrigerated Cases
                                            • Door Gaskets
                                            • Zero Energy Doors
                                            • Air Cooled Refrigeration Condenser
                                            • Oversized Condenser with VFD
                                            • Case Light Occupancy Controls
                                            • LED Open Case Lighting
                                            • LED Enclosed Case Lighting Refrigerated
                                            • LED Enclosed Case Lighting Freezer
                                              • Food Service
                                                • Beverage and Snack Machine Controls
                                                • ENERGY STARreg Refrigerated Beverage Vending Machines
                                                • ENERGY STARreg Electric Steam Cooker
                                                • ENERGY STARreg Electric Combination Oven
                                                • ENERGY STARreg Commercial Convection Oven
                                                • ENERGY STARreg Commercial Fryers
                                                • ENERGY STARreg Commercial Hot Holding Cabinet
                                                  • Motors and Variable Frequency Drives
                                                    • Early Replacement Motors
                                                    • Variable Frequency Drives on HVAC Fan Applications
                                                    • Variable Frequency Drives on Pump Applications
                                                    • Variable Speed Control for Kitchen Exhaust Hoods
                                                    • Variable Speed Drives for Process or Other Equipment
                                                      • Domestic Hot Water
                                                        • Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater
                                                        • Heat Pump Water Heater
                                                        • Low Flow Pre-Rinse Spray Valve
                                                        • Domestic Hot Water Incentive Table
                                                          • Compressed Air Systems
                                                            • No-loss Condensate Drain
                                                            • Air-Entraining air nozzle
                                                            • Storage Tanks for LoadNo Load Screw Compressors
                                                            • Cycling Refrigerated Thermal Mass Dryer
                                                            • Variable Speed Air Compressor
                                                            • Compressed Air System Optimization
                                                            • Compressed Air Systems Incentive Table
                                                              • Data Centers
                                                                • Air Cooled Chiller
                                                                • Air Cooled Chiller without Condenser
                                                                • Computer Room Air Conditioner
                                                                • Computer Room Air Handler Variable Speed
                                                                  • Replacing constant speed CRAH with VSD CRAH
                                                                    • Water Cooled Centrifugal Chiller
                                                                    • Water Cooled Positive Displacement or Reciprocating Chiller
                                                                    • Uninterruptible Power Supply
                                                                    • Mainframe Refresh
                                                                    • Server Refresh
                                                                      • Whole Building Systems
                                                                        • Whole Building Systems Approach
                                                                        • How to Apply for Whole Building Systems Incentives
                                                                        • Customer Eligibility
                                                                        • Project Eligibility
                                                                        • Whole Building Systems Incentives Table
                                                                          • Custom Project Specifications
                                                                            • Instructions for Energy Savings Calculations for Custom Projects
                                                                            • Equipment Information Submittals
                                                                            • Energy Savings Calculations
                                                                            • Baseline for Custom Analysis
                                                                            • Baseline or Existing System Summary

Refrigeration Suction Pipe Insulation 1 Must insulate bare refrigeration suction lines of 1 58 inches in diameter or less on existing equipment only 2 Cooler lines require frac34 inch of flexible closed-cell nitrite rubber or an equivalent insulation 3 Freezer lines require 1-inch of flexible closed-cell nitrite rubber or an equivalent insulation 4 Insulation exposed to the outdoors must be protected from the weather (ie jacketed with a medium-gauge aluminum jacket)

Night Cover 1 Must install a cover on an existing open refrigerated display case to decrease its cooling load during off hours 2 The equipment manufacturer must not object to the use of night covers for the existing display case model 3 This rebate is based on the linear footage of the installed 4 The cover must be applied for a period of at least six hours

Strip Curtain on Walk-In CoolerFreezer 1 New strip curtains or plastic swinging doors must be installed on doorways of refrigerated spaces (conditioned to less than 50deg F) 2 Rebate is based on the linear footage of the doorway that the strip curtains are being installed in 3 Opening between the strip curtain and bottom of doorway must be no larger than 1 inch 4 Strips must have an overlay greater than 1 inch

Evaporator Coil Defrost Control 1The current system must include an operating electric defrost system with a functional electroshymechanical time clock 2 Evaporator coil temperature and pressure must be monitored by controller in order to determine optimal defrost cycles 3 New intelligent control systems to control the defrost systems will typically replace timed- defrost controls

Variable Speed Refrigeration Compressor This measure VSD control for refrigeration systems and its eligibility targets applies to retrofit construction in the commercial and industrial building sectors it is most applicable to grocery stores or food processing applications with refrigeration systems This protocol is for a VSD control system replacing a slide valve control system

Add Doors to Open Refrigerated Cases The eligible retrofit equipment is either no sweat doors or doors with anti-sweat heaters If a lighting retrofit is included with the new doors it must consume the same amount of energy or less energy than the old lighting Upgrades to lighting or other system components should be processed separately Horizontal cases are not eligible and should be processed as custom

Door Gaskets PECO Smart Ideas For Your Business CampI Program Application Manual

Q1 2017 pg 33

This measure is applicable to commercial refrigeration and applies to the replacement of worn-out gaskets with new better-fitting gaskets Applicable gaskets include those located on the doors of walk-in andor reach-in coolers and freezers This protocol applies to the main doors of both low temperature (ldquofreezerrdquo ndash below 32 degF) and medium temperature (ldquocoolerrdquo ndash above 32 degF) walk-ins

Zero Energy Doors For this measure a no-heatlow-heat clear glass door must be installed on an upright display case It is limited to door heights of 57 inches or more Doors must have either heat reflective treated glass be gas filled or both This measure applies to low temperature cases onlymdashthose with a case temperature below 0degF Doors must have 3 or more panes Total door rail glass and frame heater amperage ( 120 volt) cannot exceed 039413 amps per door for low temperature display cases Rebate is based on the door width (not including case frame)

Air Cooled Refrigeration Condenser Approach temperature lt8F for low temperature loads lt13F for medium temperature loads

Oversized Condenser with VFD New standalone condenser must no more than 150 larger than load

Case Light Occupancy Controls Acceptable for freezer or refrigerated cases as well as open cases or cases with doors

LED Open Case Lighting For replacing open case T8 or T12 fluorescent fixtures with DLC listed LEDs on refrigerators coolers and freezers

LED Enclosed Case Lighting Refrigerated LED case lighting with or without motion sensors on enclosed refrigerated vertical displays The baseline equipment is assumed to be cases with uncontrolled T8 or T12 linear fluorescent lamps

LED Enclosed Case Lighting Freezer LED case lighting with or without motion sensors on enclosed freezer vertical displays The baseline equipment is assumed to be cases with uncontrolled T8 or T12 linear fluorescent lamps

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 34

Refrigeration Measures Ref Measure

Measure Incentive Unit IncentiveUnit Code R01 Anti-Sweat Heater Controls Door $30

R02 Evaporator Fan Controls Controller $50

R03 Floating-head Pressure Controls HP $20

R04 Automatic Door Closers fo r Walk-in Coolers Door $75

R05 Automatic Door Closers fo r Walk-in Freezers Door $75

R06 Evaporator Fan EC Motor fo r Reach- in Cases Motor $35

RO Evaporator Fan EC Motor fo r Walk-in Cases Motor $50

R08 ENERGY STARreg Glass Door Freezer lt15 Cu Ft Unit $100

R09 ENERGY STARreg Glass Door Freezer 15- 49 Cu Ft Unit $125

R10 ENERGY STARreg Glass Door Freezer ~ 50 Cu Ft Unit $145

R11 ENERGY STARreg Solid Door Freezer Unit $75

R12 ENERGY STARreg Glass Door Refrigerator lt50 Cu Ft Unit $30

R13 ENERGY STARreg Glass Door Refrigerator gt= 50 Cu Ft Unit $50

K14 t NtKGY ~ I AKreg ~Olld Uoor Ketngerator $ OU Cu t-t Unit $~0

R15 Suction Pipe Insulation Walk-in Coolers Linear Foot $050

R16 Suction Pipe Insulation Walk in Freezers Linear Foot $075

R17 Night Cover Linear Foot $800

R18 Strip Curtains on Walk-in Cooler Linear Foot $250

R19 Evaporator Coil Defrost Control Controller $7500

R20 Variable Speed Refrigeration Compressor Compressor $85

R21 Add Doors to Open Refrigerated Cases Door $55

R22 Door Gaskets Door $250

R23 Zero Energy Doors Door $50

R24 A ir Cooled Refrigeration Condenser Ton $10

R25 Oversized Condenser with VFD Ton $10

R26 Case Light Occupancy Controls Door $8

R27 LED Open Cose Lighting Cose $10

R28 LED Enclosed Case Lighting Refrigerated Door $30

R30 LED Enclosed Case Lighting Freezer Door $30

Refrigeration Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 35

Food Service Beverage and Snack Machine Controls Incentives are offered for refrigerated vending machines that contain non-perishable bottled and canned beverages Controller for both types of systems must include a passive infrared occupancy sensor to turn off fluorescent lights and other energized machine systems when the surrounding area is unoccupied for 15 minutes or longer For the refrigerated machines the control logic may include periodic power up at 2-hour intervals or longer to maintain product temperature and provide compressor protection

ENERGY STARreg Refrigerated Beverage Vending Machines Incentives are offered for ENERGY STARreg beverage vending machines Qualifying machines can be found at httpswwwenergystargovproductsothervending_machines

ENERGY STARreg Electric Steam Cooker This measure applies to the installation of electric ENERGY STAR steam cookers as either a new item or replacement for an existing unit Gas steam cookers are not eligible The steam cookers must meet minimum ENERGY STAR efficiency requirements A qualifying steam cooker must meet a minimum cooking efficiency of 50 percent and meet idle energy rates specified by pan capacity

ENERGY STARreg Electric Combination Oven This measure applies to electric ovens capable of handling single 12 x 20 x 25 pan per rack

ENERGY STARreg Commercial Convection Oven The oven must meet or exceed heavy load potato cooking energy efficiency of greater than 70 utilizing ASTM Standard F149 Applies only to electric ovens

ENERGY STARreg Commercial Fryers The commercial fryer must have a tested heavy load (French fry for large vats) cooking energy efficiency of greater than 80 utilizing American Society for Testing and Materials (ASTM) Standard F1361 for commercial fryers and ASTM Standard F2144 for large vat fryers Multiple vat configurations are paid per qualifying vat ENERGY STAR maintains a list of qualifying products and specifications at httpwwwenergystargov

ENERGY STARreg Commercial Hot Holding Cabinet Energy STAR rating electric

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 36

Food Service amp Other Measures FoodOther

Measure Incentive Unit Incentive

Measure Code Unit

F01 Beverage Machine Controls Unit $25

F02 Snack Machine Controls Unit $20

F03 ENERGY STARreg Refrigerated Beverage Vending Machir Unit $125

F04 ENERGY STARreg Commerc ial Steam Cooker Unit $200

F05 ENERGY STARreg Electric Combination Oven Unit $200

F06 ENERGY STARreg Commercial Electric Convection Oven Unit $150

F07 ENERGY STARreg Commerc ial Fryers Unit $100

F08 ENERGY STARregCommerc ial Hot Holding Cabinet Unit $200

Food Service Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 37

Motors and Variable Frequency DrivesEarly Replacement Motors For constant speed and uniformly loaded motors this measure applies to the replacement of old motors with new energy efficient motors of the same rated horsepower Old motors must be less than 15 years Replacements where the old motor and new motor have different horsepower ratings are considered custom measures Motors with variable speeds variable loading or industrial-specific applications are also considered custom measures

Motors Incentive Table Motors

Measure Code

HP Incentive per Motor

M01 15 - 10 $40 M02 11 - 50 $100 M03 51-100 $150 M04 gt100 $300

Only VFDs on unitary systems are eligible Non-unitary systems must be submitted as a custom measure Soft start motors are not eligible

Variable Frequency Drives on HVAC Fan Applications Incentives are offered for installing VFDs on existing HVAC fans that do not have pre-existing VFDs This measure applies to HVAC supply and return fans only All other fans including cooling tower fans must be submitted as custom measures Manually fixed speed settings on HVAC fans must be submitted via custom application The VFD must control motor speed automatically in response to pressure flow temperature or other variable signal The installation of a VSD must accompany the permanent removal or disabling of any throttling devices such as inlet vanes bypass dampers and throttling valves etc The incentive is offered per controlled HP

Variable Frequency Drives on Pump Applications Incentives are offered for installing VFDs on existing chilled water pumps and heating hot water pumps that do not have existing VFDs This measure applies to chilled water pumps and heating hot water pumps only All other pumps must be submitted as custom measures Manually fixed speed settings on pumps must be submitted via custom application The VFD must control motor speed automatically in response to pressure flow temperature or other variable signal The installation of a VSD must accompany the permanent removal or disabling of any throttling devices such as throttling valves The incentive is offered per controlled HP

Variable Speed Control for Kitchen Exhaust Hoods The measure consists of installing a new VSD in conjunction with a sensor control system that varies the exhaust rate of kitchen ventilation (exhaust andor makeup air fans) based on the heat and effluent output from the cooking appliances (ie the more heat and smokevapors generated the more ventilation needed) This involves installing a temperature sensor in the hood exhaust collar andor an optic sensor on the end of the hood that senses cooking conditions and allows the system to automatically vary the rate of exhaust to match requirements by adjusting the fan speed accordingly

Variable Speed Drives for Process or Other Equipment VFD must be used in conjunction with a process (non HVAC) application To qualify for this incentive the driven equipment must operate at least 2000 hours per year Redundant or back- up units do not qualify VFDs replacing existing VFDs do not qualify The VFD must control motor

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 38

speed automatically in response to pressure flow temperature or other variable signal VFDs installed as ldquosoft startrdquo without automatic manual closed loop speed control do not qualify The installation of a VFD must accompany the permanent removal or disabling of any throttling devices such as throttling valves The incentive is per controlled HP and only applies to controlled motors less than 50 HP

VSDVFD Incentives Table VFD

Measure Code

Measure Unit Incentive per Unit

Fan Application

V01 VFD on HVAC Fan HP $25 Pump Application

Variable Speed Control for Kitchen Exhaust Hoods

Variable Speed Drives for Process or Other Equipment

V02 VFD on Chilled Water Pumps HP $25 V03 VFD on Heating Hot Water Pumps HP $25

V04 Kitchen Exhaust Fan Retrofit Hood HP $500

V05 Process Motor lt 50 HP HP $50

Domestic Hot Water Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater This measure documents the energy savings attributed to converting from a standard electric water heater to an ENERGY STAR natural gaspropane-fired water heater or a standard oil-fired water heater with an Energy Factor of 0585

Heat Pump Water Heater This includes heat pump water heaters with energy factors meeting ENERGY STAR criteria The measure described here involves a direct retrofit of a resistive electric water heater with a heat pump water heater It does not cover systems where the heat pump is a pre-heater or is combined with other water heating sources More complicated installations can be treated as custom projects

Low Flow Pre-Rinse Spray Valve This measure applies to efficient low flow pre-rinse sprayers in grocery and food service applications The most likely areas of application are kitchens in restaurants and hotels Only premises with electric water heating may qualify for this incentive In addition the replacement pre-rinse spray nozzle must use less than 16 gallons per minute with a cleanability performance of 26 seconds per plate or less Low flow pre-rinse sprayers reduce hot water usage and save energy associated with water heating

Domestic Hot Water Incentive Table

Measure Code Measure Unit Retrofit Incentive per

Unit

W01 Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater Unit $100

W02 Heat Pump Water Heater Unit $100 W03 Low-Flow Pre-Rinse Spray Valve Valve $17

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 39

Compressed Air SystemsNo-loss Condensate Drain No-loss Condensate Drains are controlled by a sensor that monitors the level of condensate and only open when there is a need to drain condensate They close before compressed air is allowed to escape This measure is targeted to non-residential customers whose equipment is a timed drain that operates on a pre-set schedule Acceptable baseline conditions are compressed air systems with standard condensate drains operated by a solenoid and timer

Air-Entraining air nozzle This measure is targeted to non-residential customers whose compressed air equipment uses stationary air nozzles in a production application with an open copper tube of 18rdquo or 14rdquo orifice diameter Energy efficient conditions require replacement of an inefficient non-air entraining air nozzle with an energy efficient air-entraining air nozzle that use less than 15 CFM at 100 psi for industrial applications

Storage Tanks for LoadNo Load Screw Compressors This measure protocol applies to the installation of air receivers with pressureflow controls to loadno load compressors Loadno load compressors unload when there is low demand The process of unloading is done over a period of time to avoid foaming of the lubrication oil Using a storage tank with pressureflow control will buffer the air demands on the compressor Reducing the number of cycles in turn reduces the number of transition times from load to no load and saves energy The baseline equipment is a loadno load compressor with a 1 galcfm storage ratio or a modulating compressor with blowdown The high efficiency equipment is a loadno load compressor with a minimum storage ratio of 4 gallons of storage per cfm

Cycling Refrigerated Thermal Mass Dryer When air is compressed water vapor in the air condenses and collects in liquid form Some of this condensate collects in the air distribution system and can contaminate downstream components such as air tools with rust oil and pipe debris Refrigerated air dryers remove the water vapor by cooling the air to its dew point and separating the condensate Changes in production and seasonal variations in ambient air temperature lead to partial loading conditions on the dryer Standard air dryers use a hot gas bypass system that is inefficient at partial loads A Cycling Thermal Mass Dryer uses a thermal storage medium to store cooling capacity when the system is operated at partial loads allowing the dryer refrigerant compressor to cycle

This measure is targeted to non-residential customers whose equipment is a non-cycling refrigerated air dryer with a capacity of 600 cfm or below Acceptable baseline conditions are a non-cycling (eg continuous) air dryer with a capacity of 600 cfm or below The replacement of desiccant deliquescent heat-of-compression membrane or other types of dryers does not qualify under this measure

Variable Speed Air Compressor This type of compressor uses a special drive to control the speed (RPM) of the unit which in turn saves energy compared to a fixed speed equivalent

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 40

No-loss Condensate Drain Air-Entraining Air Nozzle Cycling Refrigerated Thermal Mass Dryer

Compressor Incentive per

Equipment Type Units Quantity Daily Operating Unit

Hours

CA04 Storage Tanks for LoadNo Load Screw

Compressor HP $10 Compressors

CA05 Variable Speed Air Compressor

Compressor HP $30

CA06 Compressed Air System Optimization

Compressor HP $50

Compressed Air System Optimization The submitted optimization measures must be identified in an Air System Audit or equivalent study to be eligible The measures must demonstrate energy savings as evaluated by a Program Engineer Additionally measures must also fall under one or more of the category below to be eligible

1) Install storage Receivers (new receivers only replacing existing storage receivers are ineligible)

2) Compressor control (must demonstrate improvement in partial load efficiency of the compress air system including reduceeliminate partially loaded units)

3) Dryer control 4) Source pressure reduction 5) Right-sizing distribution components such as piping filters regulators

connectors and hoses (routine maintenance replacements are ineligible) 6) Leakage detection and repair 7) Eliminate low-efficiency end-usages of compressed air 8) Heat recovery (most reduce electricity consumption of the replaced heat source)

Compressed Air Systems Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 41

lt65000 Btuh

~ 65000 Btuh and lt135000 Btuh

135000 Btuhand lt240000 Btuh

240000 Btuh and lt760000 Btuh

760000 Btuh

154

142

135

125

123

Chiller Capacity Path APath B efficiency (kWton )

lt 150 tons

~150 tons and lt300 tons

300 tons and lt400 tons

400 tons and lt600 tons

600 tons

lt75 tons

~75 tons and lt150 tons

~150 tons and lt300 tons

~300 tons and lt600 tons

600 tons

0610 FU0695 FL and 0550 IPLV0440 IPLV

0610 FU0635 FL and 0550 IPLV0400 IPLV

0560 FU0595 FL and 0520 IPLV0390 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

Path APath B efficiency (kWton )

0750 FU0780 FL and 0600 IPLV0500 IPLV

0720 FU0750 FL and 0560 IPLV0490 IPLV

0660 FU0680 FL and 0540 IPLV0440 IPLV

0610 FU0625 FL and 0520 IPLV0410 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

Data Centers Data Center incentives are available for facilities ranging in size from office server closets to large standalone facilities

Air Cooled Chiller Path APath B EER (BtuWh) lt150 tons 101 FL97 FL and 137 IPLV158 IPLV ge150 tons 101 FL97 FL and 140 IPLV161 IPLV

Air Cooled Chiller without Condenser Air-cooled chillers without condenser must be rated with matching condensers and comply with air-cooled chiller efficiency requirements

Computer Room Air Conditioner

Computer Room Air Handler Variable Speed Replacing constant speed CRAH with VSD CRAH

Water Cooled Centrifugal Chiller

Water Cooled Positive Displacement or Reciprocating Chiller

Uninterruptible Power Supply Must be Energy Star Certified UPS or have full load efficiency rating

ge948 for 20-100 kVA ge978for ge100 kVA

Mainframe Refresh The rated efficiency of the replacement Mainframes power supply must be at least 8 more

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 42

- Equipment Type Units IncentiveUnit

D1 Air Cooled Chiller Ton $4000 D2 Air Cooled Chiller W ithout Condenser Ton $2000 D3 Computer Room Air Conditioner Ton $3000 D4 Computer Room Air Handler Variable Speed Ton $1000 D5 Water Cooled Centrifugal Chiller Ton $3000 D6 Water Cooled Positive Displacement or Reciprocatin $3000 D7 Uninterruptible Power Supply 20-100 kVA $1000 D8 Uninterruptible Power Supply gt 100 kVA $1000 D9 Mainframe Refresh $2000

D10 Server Refresh $2000 D11 PC Power Managment System $600 D12 HVAC System Optimization $005 D1 3 HoUCold Aisle Containment kWh saved $005 D14 Server Virtualization kW reduction $40000 D1 5 Thin Clients Units $500

efficient compared to the existing Mainframes power supply The replacement Mainframe if Inactive must be decommissioned and removed from the Data Center

Server Refresh Replacement servers must be ENERGY STARreg certified Replacement servers power supply must be 5 more efficiency compared to the power supply of the replaced servers The replaced server must be decommissioned and removed from the data center

HVAC System Optimization Final system must have these features

-Implementation of free cooling by the addition of an economizer system -Conversion of constant speed CRACCRAH into variable speed operations using VFDs and additional control functionalities and -Elevation of exhaust air temperature

HotCold Aisle Containment Includes both Hot and Cold Aisles Installing new containment measures not replacing already existed aisle containment Plenum-only installations not eligible Must result in higher difference between the return air (hot aisle) and supply air (cold aisle) temperatures measured at rack intake and exhaust locations

Server Virtualization Minimum of consolidating 5 Servers virtualized into one Server The virtualized servers if inactive are removed from the Data Center

Thin Clients Must be ENERGY STAR certified thin clients Decommissioned clients are removed from the Data Center

Data Center Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 43

Whole Building Systems Whole Building Systems Approach

The Whole Building Systems approach is intended to encourage integrated energy efficient designs by providing enhanced incentives to the customer who addresses overall energy performance Owners of eligible and qualifying new construction and major renovation projects can receive Whole Building Systems incentives when energy modeling indicates the projectrsquos performance is over 10 better than the ASHRAE 901-2007 Savings from eligible electric end-uses in kilowatt hours define the amount of financial incentive Energy savings achieved through renewable energy sources are not counted toward project energy savings and are not included in the savings basis Incentive reservations obtained during the design phase of a project will be honored for up to 24 months

How to Apply for Whole Building Systems Incentives Before construction begins bull A Pre-notification Application must be submitted documenting the Owners intention to

seek Whole Building Systems incentives bull The Owner must confirm the goals and energy efficiency strategies being pursued by the

design team on the completed Pre-notification Worksheet (Checklist tab) and in the project Summary (Whole Building Performance Summary tab)

bull Submit executable building modeling software files bull Submit the Whole Building Performance Summary worksheet energy simulation model

inputs and outputs and supporting documentation bull Receive confirmation and eligibility notification from the PECO Smart Ideas team and

receive an incentive reservation bull The final incentive paid may differ from the reserved incentive amount The final

incentive will be calculated based on site-verified equipment installation and performance The Owners final application and complete documentation must be received within 6 months of equipment installation or certificate of occupancy whichever is later

bull An executable energy model and model output demonstrating compliance with the criteria of ASHRAE 901-2007 Appendix G will be required and the equipment data sheets LED lighting fixtures must be on the DLC or Energy STAR qualified products list (QPL) to be eligible LED fixtures not on the DLC or Energy STAR QPL has the option of submitting LM79 and LM80 test reports for evaluation against DLC and Energy STAR eligibility criteria

During the construction period bull Owner and design team continue to work closely with their chosen contractor to assure

energy efficiency measures are included and installed in the completed building

When the building is constructed and operational bull Complete the Owner final application Request an equipment verification site visit by the

PECO Smart Ideas team Equipment must be installed and fully operational o Program staff will schedule a site visit and utilize submitted documentation and

measurement tools to verify that the installation follows the submitted energy simulation model

bull When PECO confirms that there are no significant changes to the installed equipment payment of the reserved incentive will be made to the Owner within 6 weeks

bull If changes from the proposed design energy simulation are found the Owner and design team will be notified of the reduced incentive amount a period of 20 calendar days will

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 44

Improvement Incentive per Sq Ft

over Code

~11 to lt20 $0155

~20 to lt30 $0233

~30 to lt40 $0350

~40 to lt60 $0525

~60 $0700

be allowed for supplemental information to be provided if no additional information is received by PECO Smart Ideas team the reduced incentive payments will be made and sent to the Owner if additional clarification and information is available program staff will work diligently to resolve the discrepancies and arrive at a reasonable incentive adjustment with the customer

Payments made by PECO Smart Ideas are final

Customer Eligibility The Owner of the proposed new building project must be a customer of PECO and receive delivery of electric service from PECO to receive kilowatt-hour based incentives Please note that electricity supply can be provided by any vendor

Project Eligibility bull The project must be a new construction or major renovation Major renovations involving

the removal and redesign of at least two building systems (such as interior lighting and mechanical systems) may apply for Whole Building Systems incentives

bull To qualify for incentives projects must demonstrate energy efficiency enhancements that achieve at least 11 improvement in the proposed design versus the standard baseline

bull The Owner must submit a Pre-approval Application to the program at the stage where changes for increased energy efficiency are still feasible and construction has not been completed

bull Projects receiving Whole Building Systems incentives are not eligible to receive other incentives such as the prescriptive or custom program incentives for the same scope

bull Project components that are NOT eligible for consideration as a basis for PECO Smart Ideas include the following o Alternative fuel sources (eg use of gas or oil equipment in lieu of electric) Please note

that combined heat and power (CHP) systems will be incentivized for the electricity they produce

o Renewable energy sources (eg solar wind biomass) bull Ineligible savings include exterior lighting process receptacle miscellaneous loads and

other unregulated end-uses Custom incentives are available for new construction exterior lighting

Whole Building Systems Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 45

Custom Project Specifications Instructions for Energy Savings Calculations for Custom Projects Custom projects must involve measures that result in a reduction in electric energy use (kWh) Electricity savings may result from either efficiency improvements or fuel switching Custom Incentives are based on the first year kilowatt-hour savings Custom applications must be accompanied by detailed engineering calculations that document the annual total energy savings

The following serve as guidelines for the minimum required documentation

Equipment Information Submittals bull A list of the present and proposed equipment and components to be installed

including manufacturerrsquos catalogmodel number bull Manufacturerrsquos specification sheets showing capacities and performance for all major

components

Energy Savings Calculations Provide calculations documenting the predicted energy consumption of the existing (or baseline) and proposed system using appropriate analytical tools and clearly stated assumptions Calculations may be performed by ldquohandrdquo but spreadsheet analysis or more rigorous modeling is preferred All analysis should be provided in electronic format All assumptions such as operating hours existing and proposed equipment operational details must be presented Engineering algorithms and procedures from recognized technical organizations such as ASHRAE SMACNA ANSI etc must be used Use rated performance factors tested under accepted procedures specified by recognized rating agencies such as AHRI ANSI ASTM etc Provide an explanation when equipment performance rating conditions vary from standard conditions

In support of the calculations extensive documentation must be provided that provides the basis for the savings estimates The documentation must provide information on the equipment operating schedule daily and seasonal load profile and baseline AND energy efficient equipment performance at the operating loads Typical documentation for custom projects often includes bull Engineering or architectural drawings and ldquoequipment schedulerdquo sheets bull Component specification sheets that include part load efficiency or performance

factors bull Spreadsheet calculations or inputoutput files and results from system modeling or

other engineering analysis using accepted engineering algorithms and practices bull Log sheets trend logs from a building management system or other operating

documentation that are often necessary to document operating hours and equipment loading and used as a basis for the calculations (in some cases short term monitoring may be required to document the load profile)

bull Control sequence of operations that are necessary where controls play a part in the savings equation

Additional documentation other than that described in the application may be required for program participation Larger projects may also require pre- and post-project sub metering or monitoring of loads andor power input as part of another measurement and verification activity to demonstrate the actual energy savings that are realized

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 46

Baseline for Custom Analysis Where equipment is replaced prior to the end of its rated service life in order to achieve energy savings the existing equipment performance may be used as the baseline in the energy savings calculations Where equipment is replaced due to failure or for other reasons (such as obsolescence or a need for more capacity) the baseline performance used in the savings calculation should be either the minimum performance that would be required by code for that equipment type and application (where a code applies) or the performance of the equipment that would have been selected as the customers standard practice when a code does not apply

Baseline or Existing System Summary On custom worksheet on application form include make model number name plate information (such as operating voltage and rated full load amps) rated capacity quantities equipment condition and age facility operating hours equipment operating schedule and load curves If needed attach separate sheets

All decisions regarding incentives for custom projects are in the sole discretion of PECO

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 47

APPENDIX PROGRAM UPDATES SUMMARY (Q1 2017) Multifamily Nursing Home and Assisted Living retrofit customers need to apply for incentives through the PECO Smart Ideas Multi-Family Program administered by Franklin Energy For more information please contact Taylor Adler at tadlerfranklinenergycom or call 1-844-4BIZ-SAVE Multifamily Nursing Home and Assisted Living new construction customers can proceed with applying for incentives here

Revised Incentives

Data Centers

Measure Incentive Effective Immediately Previous Incentive

Air-cooled chiller for data centers $40ton $10ton Air-cooled chiller without condenser for data centers $20ton $10ton

Computer room air conditioner $30ton $7ton Water-cooled centrifugal chiller for data centers $30ton $5ton Water-cooled positive displacement or reciprocating chiller for data centers

$30ton $5ton

Uninterruptible power supply 20-100 kVA $10kVA $6kVA Uninterruptible power supply gt100 kVA $10kVA $1kVA Mainframe refresh $20kW installed $5kW installed Server refresh $20kW installed $4kW installed Server virtualization $400kW reduction $4kW reduction Thin clients $5units $4units

Lighting (Effective Immediately)

Measure Incentive Effective Immediately Specification Previous

Incentive Specification

New construction exterior LED outdoor flood light LED parking garage and canopy lighting LED polearm mounted parking and roadway lighting LED wall mount fixture

$005kWh (custom)

Lighting Power Density (LPD) Requirements Unchanged

$10-54 fixture

Lighting Power Density (LPD) (Wft2) by Space Type or Building Area

LED Replacement Lamps (Tubes) 2

$250lamp 5 Min Watts Reduced

$250lamp 6 Min Watts Reduced

LED Replacement Lamps (Tubes) 4

$400lamp 10 Min Watts Reduced

$400lamp 12 Min Watts Reduced

Permanent Fixture Removal $010Watt removed

Clarification of calculation to represent actual Wattage removed

$010Watt removed

Lighting (Effective 6117)

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 48

Measure Incentive Effective 6117 Specification Previous

Incentive Previous Specification

Interior LED high-bay fixtures andor retrofit kits if lt 20000 LED Lumens

$50fixture 150 Min Watts Reduced

$75fixture 150 Min Watts Reduced

Interior LED high-bay fixtures andor retrofit kits if gt 20000 LED Lumens

$75fixture 225 Min Watts Reduced

$75fixture 150 Min Watts Reduced

New Incentives

Compressed Air

Measure New Incentive Effective Immediately Variable speed air compressor $30compressor HP Compressed air system optimization $50compressor HP

HVAC

Measure New Incentive Effective Immediately ECM circulation pump $50pump Retro-commissioning cooling systems $750ton Retro-commissioning whole building $010square foot Energy management system $25ton Demand controlled ventilation $25ton Water-cooled air conditioner $22ton

Food Service

Measure New Incentive Effective Immediately Combination oven $200unit ENERGY STARreg commercial convection oven $150unit ENERGY STARreg commercial fryers $100unit ENERGY STARreg commercial hot holding cabinet $200unit

Refrigeration

Measure New Incentive Effective Immediately Air-cooled refrigeration condenser $10ton Oversized condenser with VFD $10ton Case light occupancy controls $750door

Lighting

Measure New Incentive Effective Immediately Interior central lighting controls $00175sq foot

Motors and Drives

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 49

-

Measure New Incentive Effective Immediately VFD for dust collection system motor $50HP

Application Clarifications and Revised Requirements

Clarification of LED Eligibility for New Construction or Retrofit Projects

LED Eligibility is determined by whether lighting products are listed in either the DesignLights Consortium (DLC) Qualified Products List of commercial-grade LED luminaires or the US Environmental Protection Agency database of ENERGY STAR certified products For products not yet listed contractors may submit LM79 and LM80 test reports PECO Smart Ideas engineers will review test reports to determine if the product in question meets performance specifications

Revised W 9 Requirement

W-9 forms EIN numbers are no longer required

Deletion of erroneous statement in New Construction Lighting

The following statement from previous Business Manual has been deleted ldquoThe minimum lighting power density used to calculate the incentive shall be no lower than 50 of the ASHRAE 901-2007 valuerdquo

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 50

  • Commercial amp Industrial Program Application Manual
    • Follow This Easy Process
      • Pre-Approval Application Checklist
      • Final Application Checklist
          • Terms and Conditions
            • Program Effective Dates
            • Program and Project Eligibility
            • Incentive Payment Limits
            • Application Review Process
            • Inspections andor PUCrsquos Statewide Program Evaluation
            • Requirements for Custom Project Electricity Savings Calculation
            • Tax Liability
            • No Endorsement
            • Warranties
            • Limitation of Liability
            • Assignment
            • Customerrsquos Certification
            • Termination
            • Acknowledgement
              • Retrofit Lighting Solutions
                • General Linear Fluorescent Lamp and Ballast Specification Requirements
                • LED Lamps and Fixtures
                • Minimum Watts Reduced
                • Linear LED (Tubes)
                • Permanent Fixture Removal
                  • LED Traffic Signals
                    • LED Traffic Signals Incentive Table
                      • New Construction Lighting Specifications
                        • New Construction Lighting Incentives Table
                          • New Construction Lighting Power Density Code
                              • Exterior New Construction Lighting
                              • HVAC Equipment
                                • Air-Source Air Conditioners and Air-Source Heat Pumps
                                • Package Terminal Systems (Replacements)
                                • Ductless Mini-Split Heat Pump lt54 Tons
                                • Geothermal Heat Pump
                                  • Other HVAC Equipment
                                    • Hotel Guest Room Occupancy Sensor
                                    • ECM Circulation Fan
                                    • ECM Circulation Pump
                                    • Retrocomissioning Cooling Systems
                                    • Retrocomissioning Whole Building
                                    • Energy Management System
                                    • Demand Controlled Ventilation
                                    • Other HVAC Incentives Table
                                      • Unitary HVAC Chillers
                                        • Air-Cooled Chillers Water Cooled Positive Displacement Reciprocating Chillers and Water Cooled Centrifugal Chillers
                                          • Refrigeration
                                            • Anti-Sweat Heater Controls
                                            • Evaporator Fan Controls
                                            • Floating Head Pressure Controls
                                            • Automatic Door Closers for Walk-In Coolers and Freezers
                                            • EC Motor for Walk-inReach-in Refrigerated cases or Freezer cases
                                            • ENERGY STAR Solid Door Freezer and Glass Door Freezer and Refrigerators
                                            • Refrigeration Suction Pipe Insulation
                                            • Night Cover
                                            • Strip Curtain on Walk-In CoolerFreezer
                                            • Evaporator Coil Defrost Control
                                            • Variable Speed Refrigeration Compressor
                                            • Add Doors to Open Refrigerated Cases
                                            • Door Gaskets
                                            • Zero Energy Doors
                                            • Air Cooled Refrigeration Condenser
                                            • Oversized Condenser with VFD
                                            • Case Light Occupancy Controls
                                            • LED Open Case Lighting
                                            • LED Enclosed Case Lighting Refrigerated
                                            • LED Enclosed Case Lighting Freezer
                                              • Food Service
                                                • Beverage and Snack Machine Controls
                                                • ENERGY STARreg Refrigerated Beverage Vending Machines
                                                • ENERGY STARreg Electric Steam Cooker
                                                • ENERGY STARreg Electric Combination Oven
                                                • ENERGY STARreg Commercial Convection Oven
                                                • ENERGY STARreg Commercial Fryers
                                                • ENERGY STARreg Commercial Hot Holding Cabinet
                                                  • Motors and Variable Frequency Drives
                                                    • Early Replacement Motors
                                                    • Variable Frequency Drives on HVAC Fan Applications
                                                    • Variable Frequency Drives on Pump Applications
                                                    • Variable Speed Control for Kitchen Exhaust Hoods
                                                    • Variable Speed Drives for Process or Other Equipment
                                                      • Domestic Hot Water
                                                        • Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater
                                                        • Heat Pump Water Heater
                                                        • Low Flow Pre-Rinse Spray Valve
                                                        • Domestic Hot Water Incentive Table
                                                          • Compressed Air Systems
                                                            • No-loss Condensate Drain
                                                            • Air-Entraining air nozzle
                                                            • Storage Tanks for LoadNo Load Screw Compressors
                                                            • Cycling Refrigerated Thermal Mass Dryer
                                                            • Variable Speed Air Compressor
                                                            • Compressed Air System Optimization
                                                            • Compressed Air Systems Incentive Table
                                                              • Data Centers
                                                                • Air Cooled Chiller
                                                                • Air Cooled Chiller without Condenser
                                                                • Computer Room Air Conditioner
                                                                • Computer Room Air Handler Variable Speed
                                                                  • Replacing constant speed CRAH with VSD CRAH
                                                                    • Water Cooled Centrifugal Chiller
                                                                    • Water Cooled Positive Displacement or Reciprocating Chiller
                                                                    • Uninterruptible Power Supply
                                                                    • Mainframe Refresh
                                                                    • Server Refresh
                                                                      • Whole Building Systems
                                                                        • Whole Building Systems Approach
                                                                        • How to Apply for Whole Building Systems Incentives
                                                                        • Customer Eligibility
                                                                        • Project Eligibility
                                                                        • Whole Building Systems Incentives Table
                                                                          • Custom Project Specifications
                                                                            • Instructions for Energy Savings Calculations for Custom Projects
                                                                            • Equipment Information Submittals
                                                                            • Energy Savings Calculations
                                                                            • Baseline for Custom Analysis
                                                                            • Baseline or Existing System Summary

This measure is applicable to commercial refrigeration and applies to the replacement of worn-out gaskets with new better-fitting gaskets Applicable gaskets include those located on the doors of walk-in andor reach-in coolers and freezers This protocol applies to the main doors of both low temperature (ldquofreezerrdquo ndash below 32 degF) and medium temperature (ldquocoolerrdquo ndash above 32 degF) walk-ins

Zero Energy Doors For this measure a no-heatlow-heat clear glass door must be installed on an upright display case It is limited to door heights of 57 inches or more Doors must have either heat reflective treated glass be gas filled or both This measure applies to low temperature cases onlymdashthose with a case temperature below 0degF Doors must have 3 or more panes Total door rail glass and frame heater amperage ( 120 volt) cannot exceed 039413 amps per door for low temperature display cases Rebate is based on the door width (not including case frame)

Air Cooled Refrigeration Condenser Approach temperature lt8F for low temperature loads lt13F for medium temperature loads

Oversized Condenser with VFD New standalone condenser must no more than 150 larger than load

Case Light Occupancy Controls Acceptable for freezer or refrigerated cases as well as open cases or cases with doors

LED Open Case Lighting For replacing open case T8 or T12 fluorescent fixtures with DLC listed LEDs on refrigerators coolers and freezers

LED Enclosed Case Lighting Refrigerated LED case lighting with or without motion sensors on enclosed refrigerated vertical displays The baseline equipment is assumed to be cases with uncontrolled T8 or T12 linear fluorescent lamps

LED Enclosed Case Lighting Freezer LED case lighting with or without motion sensors on enclosed freezer vertical displays The baseline equipment is assumed to be cases with uncontrolled T8 or T12 linear fluorescent lamps

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 34

Refrigeration Measures Ref Measure

Measure Incentive Unit IncentiveUnit Code R01 Anti-Sweat Heater Controls Door $30

R02 Evaporator Fan Controls Controller $50

R03 Floating-head Pressure Controls HP $20

R04 Automatic Door Closers fo r Walk-in Coolers Door $75

R05 Automatic Door Closers fo r Walk-in Freezers Door $75

R06 Evaporator Fan EC Motor fo r Reach- in Cases Motor $35

RO Evaporator Fan EC Motor fo r Walk-in Cases Motor $50

R08 ENERGY STARreg Glass Door Freezer lt15 Cu Ft Unit $100

R09 ENERGY STARreg Glass Door Freezer 15- 49 Cu Ft Unit $125

R10 ENERGY STARreg Glass Door Freezer ~ 50 Cu Ft Unit $145

R11 ENERGY STARreg Solid Door Freezer Unit $75

R12 ENERGY STARreg Glass Door Refrigerator lt50 Cu Ft Unit $30

R13 ENERGY STARreg Glass Door Refrigerator gt= 50 Cu Ft Unit $50

K14 t NtKGY ~ I AKreg ~Olld Uoor Ketngerator $ OU Cu t-t Unit $~0

R15 Suction Pipe Insulation Walk-in Coolers Linear Foot $050

R16 Suction Pipe Insulation Walk in Freezers Linear Foot $075

R17 Night Cover Linear Foot $800

R18 Strip Curtains on Walk-in Cooler Linear Foot $250

R19 Evaporator Coil Defrost Control Controller $7500

R20 Variable Speed Refrigeration Compressor Compressor $85

R21 Add Doors to Open Refrigerated Cases Door $55

R22 Door Gaskets Door $250

R23 Zero Energy Doors Door $50

R24 A ir Cooled Refrigeration Condenser Ton $10

R25 Oversized Condenser with VFD Ton $10

R26 Case Light Occupancy Controls Door $8

R27 LED Open Cose Lighting Cose $10

R28 LED Enclosed Case Lighting Refrigerated Door $30

R30 LED Enclosed Case Lighting Freezer Door $30

Refrigeration Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 35

Food Service Beverage and Snack Machine Controls Incentives are offered for refrigerated vending machines that contain non-perishable bottled and canned beverages Controller for both types of systems must include a passive infrared occupancy sensor to turn off fluorescent lights and other energized machine systems when the surrounding area is unoccupied for 15 minutes or longer For the refrigerated machines the control logic may include periodic power up at 2-hour intervals or longer to maintain product temperature and provide compressor protection

ENERGY STARreg Refrigerated Beverage Vending Machines Incentives are offered for ENERGY STARreg beverage vending machines Qualifying machines can be found at httpswwwenergystargovproductsothervending_machines

ENERGY STARreg Electric Steam Cooker This measure applies to the installation of electric ENERGY STAR steam cookers as either a new item or replacement for an existing unit Gas steam cookers are not eligible The steam cookers must meet minimum ENERGY STAR efficiency requirements A qualifying steam cooker must meet a minimum cooking efficiency of 50 percent and meet idle energy rates specified by pan capacity

ENERGY STARreg Electric Combination Oven This measure applies to electric ovens capable of handling single 12 x 20 x 25 pan per rack

ENERGY STARreg Commercial Convection Oven The oven must meet or exceed heavy load potato cooking energy efficiency of greater than 70 utilizing ASTM Standard F149 Applies only to electric ovens

ENERGY STARreg Commercial Fryers The commercial fryer must have a tested heavy load (French fry for large vats) cooking energy efficiency of greater than 80 utilizing American Society for Testing and Materials (ASTM) Standard F1361 for commercial fryers and ASTM Standard F2144 for large vat fryers Multiple vat configurations are paid per qualifying vat ENERGY STAR maintains a list of qualifying products and specifications at httpwwwenergystargov

ENERGY STARreg Commercial Hot Holding Cabinet Energy STAR rating electric

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 36

Food Service amp Other Measures FoodOther

Measure Incentive Unit Incentive

Measure Code Unit

F01 Beverage Machine Controls Unit $25

F02 Snack Machine Controls Unit $20

F03 ENERGY STARreg Refrigerated Beverage Vending Machir Unit $125

F04 ENERGY STARreg Commerc ial Steam Cooker Unit $200

F05 ENERGY STARreg Electric Combination Oven Unit $200

F06 ENERGY STARreg Commercial Electric Convection Oven Unit $150

F07 ENERGY STARreg Commerc ial Fryers Unit $100

F08 ENERGY STARregCommerc ial Hot Holding Cabinet Unit $200

Food Service Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 37

Motors and Variable Frequency DrivesEarly Replacement Motors For constant speed and uniformly loaded motors this measure applies to the replacement of old motors with new energy efficient motors of the same rated horsepower Old motors must be less than 15 years Replacements where the old motor and new motor have different horsepower ratings are considered custom measures Motors with variable speeds variable loading or industrial-specific applications are also considered custom measures

Motors Incentive Table Motors

Measure Code

HP Incentive per Motor

M01 15 - 10 $40 M02 11 - 50 $100 M03 51-100 $150 M04 gt100 $300

Only VFDs on unitary systems are eligible Non-unitary systems must be submitted as a custom measure Soft start motors are not eligible

Variable Frequency Drives on HVAC Fan Applications Incentives are offered for installing VFDs on existing HVAC fans that do not have pre-existing VFDs This measure applies to HVAC supply and return fans only All other fans including cooling tower fans must be submitted as custom measures Manually fixed speed settings on HVAC fans must be submitted via custom application The VFD must control motor speed automatically in response to pressure flow temperature or other variable signal The installation of a VSD must accompany the permanent removal or disabling of any throttling devices such as inlet vanes bypass dampers and throttling valves etc The incentive is offered per controlled HP

Variable Frequency Drives on Pump Applications Incentives are offered for installing VFDs on existing chilled water pumps and heating hot water pumps that do not have existing VFDs This measure applies to chilled water pumps and heating hot water pumps only All other pumps must be submitted as custom measures Manually fixed speed settings on pumps must be submitted via custom application The VFD must control motor speed automatically in response to pressure flow temperature or other variable signal The installation of a VSD must accompany the permanent removal or disabling of any throttling devices such as throttling valves The incentive is offered per controlled HP

Variable Speed Control for Kitchen Exhaust Hoods The measure consists of installing a new VSD in conjunction with a sensor control system that varies the exhaust rate of kitchen ventilation (exhaust andor makeup air fans) based on the heat and effluent output from the cooking appliances (ie the more heat and smokevapors generated the more ventilation needed) This involves installing a temperature sensor in the hood exhaust collar andor an optic sensor on the end of the hood that senses cooking conditions and allows the system to automatically vary the rate of exhaust to match requirements by adjusting the fan speed accordingly

Variable Speed Drives for Process or Other Equipment VFD must be used in conjunction with a process (non HVAC) application To qualify for this incentive the driven equipment must operate at least 2000 hours per year Redundant or back- up units do not qualify VFDs replacing existing VFDs do not qualify The VFD must control motor

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 38

speed automatically in response to pressure flow temperature or other variable signal VFDs installed as ldquosoft startrdquo without automatic manual closed loop speed control do not qualify The installation of a VFD must accompany the permanent removal or disabling of any throttling devices such as throttling valves The incentive is per controlled HP and only applies to controlled motors less than 50 HP

VSDVFD Incentives Table VFD

Measure Code

Measure Unit Incentive per Unit

Fan Application

V01 VFD on HVAC Fan HP $25 Pump Application

Variable Speed Control for Kitchen Exhaust Hoods

Variable Speed Drives for Process or Other Equipment

V02 VFD on Chilled Water Pumps HP $25 V03 VFD on Heating Hot Water Pumps HP $25

V04 Kitchen Exhaust Fan Retrofit Hood HP $500

V05 Process Motor lt 50 HP HP $50

Domestic Hot Water Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater This measure documents the energy savings attributed to converting from a standard electric water heater to an ENERGY STAR natural gaspropane-fired water heater or a standard oil-fired water heater with an Energy Factor of 0585

Heat Pump Water Heater This includes heat pump water heaters with energy factors meeting ENERGY STAR criteria The measure described here involves a direct retrofit of a resistive electric water heater with a heat pump water heater It does not cover systems where the heat pump is a pre-heater or is combined with other water heating sources More complicated installations can be treated as custom projects

Low Flow Pre-Rinse Spray Valve This measure applies to efficient low flow pre-rinse sprayers in grocery and food service applications The most likely areas of application are kitchens in restaurants and hotels Only premises with electric water heating may qualify for this incentive In addition the replacement pre-rinse spray nozzle must use less than 16 gallons per minute with a cleanability performance of 26 seconds per plate or less Low flow pre-rinse sprayers reduce hot water usage and save energy associated with water heating

Domestic Hot Water Incentive Table

Measure Code Measure Unit Retrofit Incentive per

Unit

W01 Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater Unit $100

W02 Heat Pump Water Heater Unit $100 W03 Low-Flow Pre-Rinse Spray Valve Valve $17

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 39

Compressed Air SystemsNo-loss Condensate Drain No-loss Condensate Drains are controlled by a sensor that monitors the level of condensate and only open when there is a need to drain condensate They close before compressed air is allowed to escape This measure is targeted to non-residential customers whose equipment is a timed drain that operates on a pre-set schedule Acceptable baseline conditions are compressed air systems with standard condensate drains operated by a solenoid and timer

Air-Entraining air nozzle This measure is targeted to non-residential customers whose compressed air equipment uses stationary air nozzles in a production application with an open copper tube of 18rdquo or 14rdquo orifice diameter Energy efficient conditions require replacement of an inefficient non-air entraining air nozzle with an energy efficient air-entraining air nozzle that use less than 15 CFM at 100 psi for industrial applications

Storage Tanks for LoadNo Load Screw Compressors This measure protocol applies to the installation of air receivers with pressureflow controls to loadno load compressors Loadno load compressors unload when there is low demand The process of unloading is done over a period of time to avoid foaming of the lubrication oil Using a storage tank with pressureflow control will buffer the air demands on the compressor Reducing the number of cycles in turn reduces the number of transition times from load to no load and saves energy The baseline equipment is a loadno load compressor with a 1 galcfm storage ratio or a modulating compressor with blowdown The high efficiency equipment is a loadno load compressor with a minimum storage ratio of 4 gallons of storage per cfm

Cycling Refrigerated Thermal Mass Dryer When air is compressed water vapor in the air condenses and collects in liquid form Some of this condensate collects in the air distribution system and can contaminate downstream components such as air tools with rust oil and pipe debris Refrigerated air dryers remove the water vapor by cooling the air to its dew point and separating the condensate Changes in production and seasonal variations in ambient air temperature lead to partial loading conditions on the dryer Standard air dryers use a hot gas bypass system that is inefficient at partial loads A Cycling Thermal Mass Dryer uses a thermal storage medium to store cooling capacity when the system is operated at partial loads allowing the dryer refrigerant compressor to cycle

This measure is targeted to non-residential customers whose equipment is a non-cycling refrigerated air dryer with a capacity of 600 cfm or below Acceptable baseline conditions are a non-cycling (eg continuous) air dryer with a capacity of 600 cfm or below The replacement of desiccant deliquescent heat-of-compression membrane or other types of dryers does not qualify under this measure

Variable Speed Air Compressor This type of compressor uses a special drive to control the speed (RPM) of the unit which in turn saves energy compared to a fixed speed equivalent

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 40

No-loss Condensate Drain Air-Entraining Air Nozzle Cycling Refrigerated Thermal Mass Dryer

Compressor Incentive per

Equipment Type Units Quantity Daily Operating Unit

Hours

CA04 Storage Tanks for LoadNo Load Screw

Compressor HP $10 Compressors

CA05 Variable Speed Air Compressor

Compressor HP $30

CA06 Compressed Air System Optimization

Compressor HP $50

Compressed Air System Optimization The submitted optimization measures must be identified in an Air System Audit or equivalent study to be eligible The measures must demonstrate energy savings as evaluated by a Program Engineer Additionally measures must also fall under one or more of the category below to be eligible

1) Install storage Receivers (new receivers only replacing existing storage receivers are ineligible)

2) Compressor control (must demonstrate improvement in partial load efficiency of the compress air system including reduceeliminate partially loaded units)

3) Dryer control 4) Source pressure reduction 5) Right-sizing distribution components such as piping filters regulators

connectors and hoses (routine maintenance replacements are ineligible) 6) Leakage detection and repair 7) Eliminate low-efficiency end-usages of compressed air 8) Heat recovery (most reduce electricity consumption of the replaced heat source)

Compressed Air Systems Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 41

lt65000 Btuh

~ 65000 Btuh and lt135000 Btuh

135000 Btuhand lt240000 Btuh

240000 Btuh and lt760000 Btuh

760000 Btuh

154

142

135

125

123

Chiller Capacity Path APath B efficiency (kWton )

lt 150 tons

~150 tons and lt300 tons

300 tons and lt400 tons

400 tons and lt600 tons

600 tons

lt75 tons

~75 tons and lt150 tons

~150 tons and lt300 tons

~300 tons and lt600 tons

600 tons

0610 FU0695 FL and 0550 IPLV0440 IPLV

0610 FU0635 FL and 0550 IPLV0400 IPLV

0560 FU0595 FL and 0520 IPLV0390 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

Path APath B efficiency (kWton )

0750 FU0780 FL and 0600 IPLV0500 IPLV

0720 FU0750 FL and 0560 IPLV0490 IPLV

0660 FU0680 FL and 0540 IPLV0440 IPLV

0610 FU0625 FL and 0520 IPLV0410 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

Data Centers Data Center incentives are available for facilities ranging in size from office server closets to large standalone facilities

Air Cooled Chiller Path APath B EER (BtuWh) lt150 tons 101 FL97 FL and 137 IPLV158 IPLV ge150 tons 101 FL97 FL and 140 IPLV161 IPLV

Air Cooled Chiller without Condenser Air-cooled chillers without condenser must be rated with matching condensers and comply with air-cooled chiller efficiency requirements

Computer Room Air Conditioner

Computer Room Air Handler Variable Speed Replacing constant speed CRAH with VSD CRAH

Water Cooled Centrifugal Chiller

Water Cooled Positive Displacement or Reciprocating Chiller

Uninterruptible Power Supply Must be Energy Star Certified UPS or have full load efficiency rating

ge948 for 20-100 kVA ge978for ge100 kVA

Mainframe Refresh The rated efficiency of the replacement Mainframes power supply must be at least 8 more

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 42

- Equipment Type Units IncentiveUnit

D1 Air Cooled Chiller Ton $4000 D2 Air Cooled Chiller W ithout Condenser Ton $2000 D3 Computer Room Air Conditioner Ton $3000 D4 Computer Room Air Handler Variable Speed Ton $1000 D5 Water Cooled Centrifugal Chiller Ton $3000 D6 Water Cooled Positive Displacement or Reciprocatin $3000 D7 Uninterruptible Power Supply 20-100 kVA $1000 D8 Uninterruptible Power Supply gt 100 kVA $1000 D9 Mainframe Refresh $2000

D10 Server Refresh $2000 D11 PC Power Managment System $600 D12 HVAC System Optimization $005 D1 3 HoUCold Aisle Containment kWh saved $005 D14 Server Virtualization kW reduction $40000 D1 5 Thin Clients Units $500

efficient compared to the existing Mainframes power supply The replacement Mainframe if Inactive must be decommissioned and removed from the Data Center

Server Refresh Replacement servers must be ENERGY STARreg certified Replacement servers power supply must be 5 more efficiency compared to the power supply of the replaced servers The replaced server must be decommissioned and removed from the data center

HVAC System Optimization Final system must have these features

-Implementation of free cooling by the addition of an economizer system -Conversion of constant speed CRACCRAH into variable speed operations using VFDs and additional control functionalities and -Elevation of exhaust air temperature

HotCold Aisle Containment Includes both Hot and Cold Aisles Installing new containment measures not replacing already existed aisle containment Plenum-only installations not eligible Must result in higher difference between the return air (hot aisle) and supply air (cold aisle) temperatures measured at rack intake and exhaust locations

Server Virtualization Minimum of consolidating 5 Servers virtualized into one Server The virtualized servers if inactive are removed from the Data Center

Thin Clients Must be ENERGY STAR certified thin clients Decommissioned clients are removed from the Data Center

Data Center Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 43

Whole Building Systems Whole Building Systems Approach

The Whole Building Systems approach is intended to encourage integrated energy efficient designs by providing enhanced incentives to the customer who addresses overall energy performance Owners of eligible and qualifying new construction and major renovation projects can receive Whole Building Systems incentives when energy modeling indicates the projectrsquos performance is over 10 better than the ASHRAE 901-2007 Savings from eligible electric end-uses in kilowatt hours define the amount of financial incentive Energy savings achieved through renewable energy sources are not counted toward project energy savings and are not included in the savings basis Incentive reservations obtained during the design phase of a project will be honored for up to 24 months

How to Apply for Whole Building Systems Incentives Before construction begins bull A Pre-notification Application must be submitted documenting the Owners intention to

seek Whole Building Systems incentives bull The Owner must confirm the goals and energy efficiency strategies being pursued by the

design team on the completed Pre-notification Worksheet (Checklist tab) and in the project Summary (Whole Building Performance Summary tab)

bull Submit executable building modeling software files bull Submit the Whole Building Performance Summary worksheet energy simulation model

inputs and outputs and supporting documentation bull Receive confirmation and eligibility notification from the PECO Smart Ideas team and

receive an incentive reservation bull The final incentive paid may differ from the reserved incentive amount The final

incentive will be calculated based on site-verified equipment installation and performance The Owners final application and complete documentation must be received within 6 months of equipment installation or certificate of occupancy whichever is later

bull An executable energy model and model output demonstrating compliance with the criteria of ASHRAE 901-2007 Appendix G will be required and the equipment data sheets LED lighting fixtures must be on the DLC or Energy STAR qualified products list (QPL) to be eligible LED fixtures not on the DLC or Energy STAR QPL has the option of submitting LM79 and LM80 test reports for evaluation against DLC and Energy STAR eligibility criteria

During the construction period bull Owner and design team continue to work closely with their chosen contractor to assure

energy efficiency measures are included and installed in the completed building

When the building is constructed and operational bull Complete the Owner final application Request an equipment verification site visit by the

PECO Smart Ideas team Equipment must be installed and fully operational o Program staff will schedule a site visit and utilize submitted documentation and

measurement tools to verify that the installation follows the submitted energy simulation model

bull When PECO confirms that there are no significant changes to the installed equipment payment of the reserved incentive will be made to the Owner within 6 weeks

bull If changes from the proposed design energy simulation are found the Owner and design team will be notified of the reduced incentive amount a period of 20 calendar days will

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 44

Improvement Incentive per Sq Ft

over Code

~11 to lt20 $0155

~20 to lt30 $0233

~30 to lt40 $0350

~40 to lt60 $0525

~60 $0700

be allowed for supplemental information to be provided if no additional information is received by PECO Smart Ideas team the reduced incentive payments will be made and sent to the Owner if additional clarification and information is available program staff will work diligently to resolve the discrepancies and arrive at a reasonable incentive adjustment with the customer

Payments made by PECO Smart Ideas are final

Customer Eligibility The Owner of the proposed new building project must be a customer of PECO and receive delivery of electric service from PECO to receive kilowatt-hour based incentives Please note that electricity supply can be provided by any vendor

Project Eligibility bull The project must be a new construction or major renovation Major renovations involving

the removal and redesign of at least two building systems (such as interior lighting and mechanical systems) may apply for Whole Building Systems incentives

bull To qualify for incentives projects must demonstrate energy efficiency enhancements that achieve at least 11 improvement in the proposed design versus the standard baseline

bull The Owner must submit a Pre-approval Application to the program at the stage where changes for increased energy efficiency are still feasible and construction has not been completed

bull Projects receiving Whole Building Systems incentives are not eligible to receive other incentives such as the prescriptive or custom program incentives for the same scope

bull Project components that are NOT eligible for consideration as a basis for PECO Smart Ideas include the following o Alternative fuel sources (eg use of gas or oil equipment in lieu of electric) Please note

that combined heat and power (CHP) systems will be incentivized for the electricity they produce

o Renewable energy sources (eg solar wind biomass) bull Ineligible savings include exterior lighting process receptacle miscellaneous loads and

other unregulated end-uses Custom incentives are available for new construction exterior lighting

Whole Building Systems Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 45

Custom Project Specifications Instructions for Energy Savings Calculations for Custom Projects Custom projects must involve measures that result in a reduction in electric energy use (kWh) Electricity savings may result from either efficiency improvements or fuel switching Custom Incentives are based on the first year kilowatt-hour savings Custom applications must be accompanied by detailed engineering calculations that document the annual total energy savings

The following serve as guidelines for the minimum required documentation

Equipment Information Submittals bull A list of the present and proposed equipment and components to be installed

including manufacturerrsquos catalogmodel number bull Manufacturerrsquos specification sheets showing capacities and performance for all major

components

Energy Savings Calculations Provide calculations documenting the predicted energy consumption of the existing (or baseline) and proposed system using appropriate analytical tools and clearly stated assumptions Calculations may be performed by ldquohandrdquo but spreadsheet analysis or more rigorous modeling is preferred All analysis should be provided in electronic format All assumptions such as operating hours existing and proposed equipment operational details must be presented Engineering algorithms and procedures from recognized technical organizations such as ASHRAE SMACNA ANSI etc must be used Use rated performance factors tested under accepted procedures specified by recognized rating agencies such as AHRI ANSI ASTM etc Provide an explanation when equipment performance rating conditions vary from standard conditions

In support of the calculations extensive documentation must be provided that provides the basis for the savings estimates The documentation must provide information on the equipment operating schedule daily and seasonal load profile and baseline AND energy efficient equipment performance at the operating loads Typical documentation for custom projects often includes bull Engineering or architectural drawings and ldquoequipment schedulerdquo sheets bull Component specification sheets that include part load efficiency or performance

factors bull Spreadsheet calculations or inputoutput files and results from system modeling or

other engineering analysis using accepted engineering algorithms and practices bull Log sheets trend logs from a building management system or other operating

documentation that are often necessary to document operating hours and equipment loading and used as a basis for the calculations (in some cases short term monitoring may be required to document the load profile)

bull Control sequence of operations that are necessary where controls play a part in the savings equation

Additional documentation other than that described in the application may be required for program participation Larger projects may also require pre- and post-project sub metering or monitoring of loads andor power input as part of another measurement and verification activity to demonstrate the actual energy savings that are realized

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 46

Baseline for Custom Analysis Where equipment is replaced prior to the end of its rated service life in order to achieve energy savings the existing equipment performance may be used as the baseline in the energy savings calculations Where equipment is replaced due to failure or for other reasons (such as obsolescence or a need for more capacity) the baseline performance used in the savings calculation should be either the minimum performance that would be required by code for that equipment type and application (where a code applies) or the performance of the equipment that would have been selected as the customers standard practice when a code does not apply

Baseline or Existing System Summary On custom worksheet on application form include make model number name plate information (such as operating voltage and rated full load amps) rated capacity quantities equipment condition and age facility operating hours equipment operating schedule and load curves If needed attach separate sheets

All decisions regarding incentives for custom projects are in the sole discretion of PECO

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 47

APPENDIX PROGRAM UPDATES SUMMARY (Q1 2017) Multifamily Nursing Home and Assisted Living retrofit customers need to apply for incentives through the PECO Smart Ideas Multi-Family Program administered by Franklin Energy For more information please contact Taylor Adler at tadlerfranklinenergycom or call 1-844-4BIZ-SAVE Multifamily Nursing Home and Assisted Living new construction customers can proceed with applying for incentives here

Revised Incentives

Data Centers

Measure Incentive Effective Immediately Previous Incentive

Air-cooled chiller for data centers $40ton $10ton Air-cooled chiller without condenser for data centers $20ton $10ton

Computer room air conditioner $30ton $7ton Water-cooled centrifugal chiller for data centers $30ton $5ton Water-cooled positive displacement or reciprocating chiller for data centers

$30ton $5ton

Uninterruptible power supply 20-100 kVA $10kVA $6kVA Uninterruptible power supply gt100 kVA $10kVA $1kVA Mainframe refresh $20kW installed $5kW installed Server refresh $20kW installed $4kW installed Server virtualization $400kW reduction $4kW reduction Thin clients $5units $4units

Lighting (Effective Immediately)

Measure Incentive Effective Immediately Specification Previous

Incentive Specification

New construction exterior LED outdoor flood light LED parking garage and canopy lighting LED polearm mounted parking and roadway lighting LED wall mount fixture

$005kWh (custom)

Lighting Power Density (LPD) Requirements Unchanged

$10-54 fixture

Lighting Power Density (LPD) (Wft2) by Space Type or Building Area

LED Replacement Lamps (Tubes) 2

$250lamp 5 Min Watts Reduced

$250lamp 6 Min Watts Reduced

LED Replacement Lamps (Tubes) 4

$400lamp 10 Min Watts Reduced

$400lamp 12 Min Watts Reduced

Permanent Fixture Removal $010Watt removed

Clarification of calculation to represent actual Wattage removed

$010Watt removed

Lighting (Effective 6117)

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 48

Measure Incentive Effective 6117 Specification Previous

Incentive Previous Specification

Interior LED high-bay fixtures andor retrofit kits if lt 20000 LED Lumens

$50fixture 150 Min Watts Reduced

$75fixture 150 Min Watts Reduced

Interior LED high-bay fixtures andor retrofit kits if gt 20000 LED Lumens

$75fixture 225 Min Watts Reduced

$75fixture 150 Min Watts Reduced

New Incentives

Compressed Air

Measure New Incentive Effective Immediately Variable speed air compressor $30compressor HP Compressed air system optimization $50compressor HP

HVAC

Measure New Incentive Effective Immediately ECM circulation pump $50pump Retro-commissioning cooling systems $750ton Retro-commissioning whole building $010square foot Energy management system $25ton Demand controlled ventilation $25ton Water-cooled air conditioner $22ton

Food Service

Measure New Incentive Effective Immediately Combination oven $200unit ENERGY STARreg commercial convection oven $150unit ENERGY STARreg commercial fryers $100unit ENERGY STARreg commercial hot holding cabinet $200unit

Refrigeration

Measure New Incentive Effective Immediately Air-cooled refrigeration condenser $10ton Oversized condenser with VFD $10ton Case light occupancy controls $750door

Lighting

Measure New Incentive Effective Immediately Interior central lighting controls $00175sq foot

Motors and Drives

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 49

-

Measure New Incentive Effective Immediately VFD for dust collection system motor $50HP

Application Clarifications and Revised Requirements

Clarification of LED Eligibility for New Construction or Retrofit Projects

LED Eligibility is determined by whether lighting products are listed in either the DesignLights Consortium (DLC) Qualified Products List of commercial-grade LED luminaires or the US Environmental Protection Agency database of ENERGY STAR certified products For products not yet listed contractors may submit LM79 and LM80 test reports PECO Smart Ideas engineers will review test reports to determine if the product in question meets performance specifications

Revised W 9 Requirement

W-9 forms EIN numbers are no longer required

Deletion of erroneous statement in New Construction Lighting

The following statement from previous Business Manual has been deleted ldquoThe minimum lighting power density used to calculate the incentive shall be no lower than 50 of the ASHRAE 901-2007 valuerdquo

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 50

  • Commercial amp Industrial Program Application Manual
    • Follow This Easy Process
      • Pre-Approval Application Checklist
      • Final Application Checklist
          • Terms and Conditions
            • Program Effective Dates
            • Program and Project Eligibility
            • Incentive Payment Limits
            • Application Review Process
            • Inspections andor PUCrsquos Statewide Program Evaluation
            • Requirements for Custom Project Electricity Savings Calculation
            • Tax Liability
            • No Endorsement
            • Warranties
            • Limitation of Liability
            • Assignment
            • Customerrsquos Certification
            • Termination
            • Acknowledgement
              • Retrofit Lighting Solutions
                • General Linear Fluorescent Lamp and Ballast Specification Requirements
                • LED Lamps and Fixtures
                • Minimum Watts Reduced
                • Linear LED (Tubes)
                • Permanent Fixture Removal
                  • LED Traffic Signals
                    • LED Traffic Signals Incentive Table
                      • New Construction Lighting Specifications
                        • New Construction Lighting Incentives Table
                          • New Construction Lighting Power Density Code
                              • Exterior New Construction Lighting
                              • HVAC Equipment
                                • Air-Source Air Conditioners and Air-Source Heat Pumps
                                • Package Terminal Systems (Replacements)
                                • Ductless Mini-Split Heat Pump lt54 Tons
                                • Geothermal Heat Pump
                                  • Other HVAC Equipment
                                    • Hotel Guest Room Occupancy Sensor
                                    • ECM Circulation Fan
                                    • ECM Circulation Pump
                                    • Retrocomissioning Cooling Systems
                                    • Retrocomissioning Whole Building
                                    • Energy Management System
                                    • Demand Controlled Ventilation
                                    • Other HVAC Incentives Table
                                      • Unitary HVAC Chillers
                                        • Air-Cooled Chillers Water Cooled Positive Displacement Reciprocating Chillers and Water Cooled Centrifugal Chillers
                                          • Refrigeration
                                            • Anti-Sweat Heater Controls
                                            • Evaporator Fan Controls
                                            • Floating Head Pressure Controls
                                            • Automatic Door Closers for Walk-In Coolers and Freezers
                                            • EC Motor for Walk-inReach-in Refrigerated cases or Freezer cases
                                            • ENERGY STAR Solid Door Freezer and Glass Door Freezer and Refrigerators
                                            • Refrigeration Suction Pipe Insulation
                                            • Night Cover
                                            • Strip Curtain on Walk-In CoolerFreezer
                                            • Evaporator Coil Defrost Control
                                            • Variable Speed Refrigeration Compressor
                                            • Add Doors to Open Refrigerated Cases
                                            • Door Gaskets
                                            • Zero Energy Doors
                                            • Air Cooled Refrigeration Condenser
                                            • Oversized Condenser with VFD
                                            • Case Light Occupancy Controls
                                            • LED Open Case Lighting
                                            • LED Enclosed Case Lighting Refrigerated
                                            • LED Enclosed Case Lighting Freezer
                                              • Food Service
                                                • Beverage and Snack Machine Controls
                                                • ENERGY STARreg Refrigerated Beverage Vending Machines
                                                • ENERGY STARreg Electric Steam Cooker
                                                • ENERGY STARreg Electric Combination Oven
                                                • ENERGY STARreg Commercial Convection Oven
                                                • ENERGY STARreg Commercial Fryers
                                                • ENERGY STARreg Commercial Hot Holding Cabinet
                                                  • Motors and Variable Frequency Drives
                                                    • Early Replacement Motors
                                                    • Variable Frequency Drives on HVAC Fan Applications
                                                    • Variable Frequency Drives on Pump Applications
                                                    • Variable Speed Control for Kitchen Exhaust Hoods
                                                    • Variable Speed Drives for Process or Other Equipment
                                                      • Domestic Hot Water
                                                        • Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater
                                                        • Heat Pump Water Heater
                                                        • Low Flow Pre-Rinse Spray Valve
                                                        • Domestic Hot Water Incentive Table
                                                          • Compressed Air Systems
                                                            • No-loss Condensate Drain
                                                            • Air-Entraining air nozzle
                                                            • Storage Tanks for LoadNo Load Screw Compressors
                                                            • Cycling Refrigerated Thermal Mass Dryer
                                                            • Variable Speed Air Compressor
                                                            • Compressed Air System Optimization
                                                            • Compressed Air Systems Incentive Table
                                                              • Data Centers
                                                                • Air Cooled Chiller
                                                                • Air Cooled Chiller without Condenser
                                                                • Computer Room Air Conditioner
                                                                • Computer Room Air Handler Variable Speed
                                                                  • Replacing constant speed CRAH with VSD CRAH
                                                                    • Water Cooled Centrifugal Chiller
                                                                    • Water Cooled Positive Displacement or Reciprocating Chiller
                                                                    • Uninterruptible Power Supply
                                                                    • Mainframe Refresh
                                                                    • Server Refresh
                                                                      • Whole Building Systems
                                                                        • Whole Building Systems Approach
                                                                        • How to Apply for Whole Building Systems Incentives
                                                                        • Customer Eligibility
                                                                        • Project Eligibility
                                                                        • Whole Building Systems Incentives Table
                                                                          • Custom Project Specifications
                                                                            • Instructions for Energy Savings Calculations for Custom Projects
                                                                            • Equipment Information Submittals
                                                                            • Energy Savings Calculations
                                                                            • Baseline for Custom Analysis
                                                                            • Baseline or Existing System Summary

Refrigeration Measures Ref Measure

Measure Incentive Unit IncentiveUnit Code R01 Anti-Sweat Heater Controls Door $30

R02 Evaporator Fan Controls Controller $50

R03 Floating-head Pressure Controls HP $20

R04 Automatic Door Closers fo r Walk-in Coolers Door $75

R05 Automatic Door Closers fo r Walk-in Freezers Door $75

R06 Evaporator Fan EC Motor fo r Reach- in Cases Motor $35

RO Evaporator Fan EC Motor fo r Walk-in Cases Motor $50

R08 ENERGY STARreg Glass Door Freezer lt15 Cu Ft Unit $100

R09 ENERGY STARreg Glass Door Freezer 15- 49 Cu Ft Unit $125

R10 ENERGY STARreg Glass Door Freezer ~ 50 Cu Ft Unit $145

R11 ENERGY STARreg Solid Door Freezer Unit $75

R12 ENERGY STARreg Glass Door Refrigerator lt50 Cu Ft Unit $30

R13 ENERGY STARreg Glass Door Refrigerator gt= 50 Cu Ft Unit $50

K14 t NtKGY ~ I AKreg ~Olld Uoor Ketngerator $ OU Cu t-t Unit $~0

R15 Suction Pipe Insulation Walk-in Coolers Linear Foot $050

R16 Suction Pipe Insulation Walk in Freezers Linear Foot $075

R17 Night Cover Linear Foot $800

R18 Strip Curtains on Walk-in Cooler Linear Foot $250

R19 Evaporator Coil Defrost Control Controller $7500

R20 Variable Speed Refrigeration Compressor Compressor $85

R21 Add Doors to Open Refrigerated Cases Door $55

R22 Door Gaskets Door $250

R23 Zero Energy Doors Door $50

R24 A ir Cooled Refrigeration Condenser Ton $10

R25 Oversized Condenser with VFD Ton $10

R26 Case Light Occupancy Controls Door $8

R27 LED Open Cose Lighting Cose $10

R28 LED Enclosed Case Lighting Refrigerated Door $30

R30 LED Enclosed Case Lighting Freezer Door $30

Refrigeration Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 35

Food Service Beverage and Snack Machine Controls Incentives are offered for refrigerated vending machines that contain non-perishable bottled and canned beverages Controller for both types of systems must include a passive infrared occupancy sensor to turn off fluorescent lights and other energized machine systems when the surrounding area is unoccupied for 15 minutes or longer For the refrigerated machines the control logic may include periodic power up at 2-hour intervals or longer to maintain product temperature and provide compressor protection

ENERGY STARreg Refrigerated Beverage Vending Machines Incentives are offered for ENERGY STARreg beverage vending machines Qualifying machines can be found at httpswwwenergystargovproductsothervending_machines

ENERGY STARreg Electric Steam Cooker This measure applies to the installation of electric ENERGY STAR steam cookers as either a new item or replacement for an existing unit Gas steam cookers are not eligible The steam cookers must meet minimum ENERGY STAR efficiency requirements A qualifying steam cooker must meet a minimum cooking efficiency of 50 percent and meet idle energy rates specified by pan capacity

ENERGY STARreg Electric Combination Oven This measure applies to electric ovens capable of handling single 12 x 20 x 25 pan per rack

ENERGY STARreg Commercial Convection Oven The oven must meet or exceed heavy load potato cooking energy efficiency of greater than 70 utilizing ASTM Standard F149 Applies only to electric ovens

ENERGY STARreg Commercial Fryers The commercial fryer must have a tested heavy load (French fry for large vats) cooking energy efficiency of greater than 80 utilizing American Society for Testing and Materials (ASTM) Standard F1361 for commercial fryers and ASTM Standard F2144 for large vat fryers Multiple vat configurations are paid per qualifying vat ENERGY STAR maintains a list of qualifying products and specifications at httpwwwenergystargov

ENERGY STARreg Commercial Hot Holding Cabinet Energy STAR rating electric

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 36

Food Service amp Other Measures FoodOther

Measure Incentive Unit Incentive

Measure Code Unit

F01 Beverage Machine Controls Unit $25

F02 Snack Machine Controls Unit $20

F03 ENERGY STARreg Refrigerated Beverage Vending Machir Unit $125

F04 ENERGY STARreg Commerc ial Steam Cooker Unit $200

F05 ENERGY STARreg Electric Combination Oven Unit $200

F06 ENERGY STARreg Commercial Electric Convection Oven Unit $150

F07 ENERGY STARreg Commerc ial Fryers Unit $100

F08 ENERGY STARregCommerc ial Hot Holding Cabinet Unit $200

Food Service Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 37

Motors and Variable Frequency DrivesEarly Replacement Motors For constant speed and uniformly loaded motors this measure applies to the replacement of old motors with new energy efficient motors of the same rated horsepower Old motors must be less than 15 years Replacements where the old motor and new motor have different horsepower ratings are considered custom measures Motors with variable speeds variable loading or industrial-specific applications are also considered custom measures

Motors Incentive Table Motors

Measure Code

HP Incentive per Motor

M01 15 - 10 $40 M02 11 - 50 $100 M03 51-100 $150 M04 gt100 $300

Only VFDs on unitary systems are eligible Non-unitary systems must be submitted as a custom measure Soft start motors are not eligible

Variable Frequency Drives on HVAC Fan Applications Incentives are offered for installing VFDs on existing HVAC fans that do not have pre-existing VFDs This measure applies to HVAC supply and return fans only All other fans including cooling tower fans must be submitted as custom measures Manually fixed speed settings on HVAC fans must be submitted via custom application The VFD must control motor speed automatically in response to pressure flow temperature or other variable signal The installation of a VSD must accompany the permanent removal or disabling of any throttling devices such as inlet vanes bypass dampers and throttling valves etc The incentive is offered per controlled HP

Variable Frequency Drives on Pump Applications Incentives are offered for installing VFDs on existing chilled water pumps and heating hot water pumps that do not have existing VFDs This measure applies to chilled water pumps and heating hot water pumps only All other pumps must be submitted as custom measures Manually fixed speed settings on pumps must be submitted via custom application The VFD must control motor speed automatically in response to pressure flow temperature or other variable signal The installation of a VSD must accompany the permanent removal or disabling of any throttling devices such as throttling valves The incentive is offered per controlled HP

Variable Speed Control for Kitchen Exhaust Hoods The measure consists of installing a new VSD in conjunction with a sensor control system that varies the exhaust rate of kitchen ventilation (exhaust andor makeup air fans) based on the heat and effluent output from the cooking appliances (ie the more heat and smokevapors generated the more ventilation needed) This involves installing a temperature sensor in the hood exhaust collar andor an optic sensor on the end of the hood that senses cooking conditions and allows the system to automatically vary the rate of exhaust to match requirements by adjusting the fan speed accordingly

Variable Speed Drives for Process or Other Equipment VFD must be used in conjunction with a process (non HVAC) application To qualify for this incentive the driven equipment must operate at least 2000 hours per year Redundant or back- up units do not qualify VFDs replacing existing VFDs do not qualify The VFD must control motor

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 38

speed automatically in response to pressure flow temperature or other variable signal VFDs installed as ldquosoft startrdquo without automatic manual closed loop speed control do not qualify The installation of a VFD must accompany the permanent removal or disabling of any throttling devices such as throttling valves The incentive is per controlled HP and only applies to controlled motors less than 50 HP

VSDVFD Incentives Table VFD

Measure Code

Measure Unit Incentive per Unit

Fan Application

V01 VFD on HVAC Fan HP $25 Pump Application

Variable Speed Control for Kitchen Exhaust Hoods

Variable Speed Drives for Process or Other Equipment

V02 VFD on Chilled Water Pumps HP $25 V03 VFD on Heating Hot Water Pumps HP $25

V04 Kitchen Exhaust Fan Retrofit Hood HP $500

V05 Process Motor lt 50 HP HP $50

Domestic Hot Water Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater This measure documents the energy savings attributed to converting from a standard electric water heater to an ENERGY STAR natural gaspropane-fired water heater or a standard oil-fired water heater with an Energy Factor of 0585

Heat Pump Water Heater This includes heat pump water heaters with energy factors meeting ENERGY STAR criteria The measure described here involves a direct retrofit of a resistive electric water heater with a heat pump water heater It does not cover systems where the heat pump is a pre-heater or is combined with other water heating sources More complicated installations can be treated as custom projects

Low Flow Pre-Rinse Spray Valve This measure applies to efficient low flow pre-rinse sprayers in grocery and food service applications The most likely areas of application are kitchens in restaurants and hotels Only premises with electric water heating may qualify for this incentive In addition the replacement pre-rinse spray nozzle must use less than 16 gallons per minute with a cleanability performance of 26 seconds per plate or less Low flow pre-rinse sprayers reduce hot water usage and save energy associated with water heating

Domestic Hot Water Incentive Table

Measure Code Measure Unit Retrofit Incentive per

Unit

W01 Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater Unit $100

W02 Heat Pump Water Heater Unit $100 W03 Low-Flow Pre-Rinse Spray Valve Valve $17

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 39

Compressed Air SystemsNo-loss Condensate Drain No-loss Condensate Drains are controlled by a sensor that monitors the level of condensate and only open when there is a need to drain condensate They close before compressed air is allowed to escape This measure is targeted to non-residential customers whose equipment is a timed drain that operates on a pre-set schedule Acceptable baseline conditions are compressed air systems with standard condensate drains operated by a solenoid and timer

Air-Entraining air nozzle This measure is targeted to non-residential customers whose compressed air equipment uses stationary air nozzles in a production application with an open copper tube of 18rdquo or 14rdquo orifice diameter Energy efficient conditions require replacement of an inefficient non-air entraining air nozzle with an energy efficient air-entraining air nozzle that use less than 15 CFM at 100 psi for industrial applications

Storage Tanks for LoadNo Load Screw Compressors This measure protocol applies to the installation of air receivers with pressureflow controls to loadno load compressors Loadno load compressors unload when there is low demand The process of unloading is done over a period of time to avoid foaming of the lubrication oil Using a storage tank with pressureflow control will buffer the air demands on the compressor Reducing the number of cycles in turn reduces the number of transition times from load to no load and saves energy The baseline equipment is a loadno load compressor with a 1 galcfm storage ratio or a modulating compressor with blowdown The high efficiency equipment is a loadno load compressor with a minimum storage ratio of 4 gallons of storage per cfm

Cycling Refrigerated Thermal Mass Dryer When air is compressed water vapor in the air condenses and collects in liquid form Some of this condensate collects in the air distribution system and can contaminate downstream components such as air tools with rust oil and pipe debris Refrigerated air dryers remove the water vapor by cooling the air to its dew point and separating the condensate Changes in production and seasonal variations in ambient air temperature lead to partial loading conditions on the dryer Standard air dryers use a hot gas bypass system that is inefficient at partial loads A Cycling Thermal Mass Dryer uses a thermal storage medium to store cooling capacity when the system is operated at partial loads allowing the dryer refrigerant compressor to cycle

This measure is targeted to non-residential customers whose equipment is a non-cycling refrigerated air dryer with a capacity of 600 cfm or below Acceptable baseline conditions are a non-cycling (eg continuous) air dryer with a capacity of 600 cfm or below The replacement of desiccant deliquescent heat-of-compression membrane or other types of dryers does not qualify under this measure

Variable Speed Air Compressor This type of compressor uses a special drive to control the speed (RPM) of the unit which in turn saves energy compared to a fixed speed equivalent

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 40

No-loss Condensate Drain Air-Entraining Air Nozzle Cycling Refrigerated Thermal Mass Dryer

Compressor Incentive per

Equipment Type Units Quantity Daily Operating Unit

Hours

CA04 Storage Tanks for LoadNo Load Screw

Compressor HP $10 Compressors

CA05 Variable Speed Air Compressor

Compressor HP $30

CA06 Compressed Air System Optimization

Compressor HP $50

Compressed Air System Optimization The submitted optimization measures must be identified in an Air System Audit or equivalent study to be eligible The measures must demonstrate energy savings as evaluated by a Program Engineer Additionally measures must also fall under one or more of the category below to be eligible

1) Install storage Receivers (new receivers only replacing existing storage receivers are ineligible)

2) Compressor control (must demonstrate improvement in partial load efficiency of the compress air system including reduceeliminate partially loaded units)

3) Dryer control 4) Source pressure reduction 5) Right-sizing distribution components such as piping filters regulators

connectors and hoses (routine maintenance replacements are ineligible) 6) Leakage detection and repair 7) Eliminate low-efficiency end-usages of compressed air 8) Heat recovery (most reduce electricity consumption of the replaced heat source)

Compressed Air Systems Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 41

lt65000 Btuh

~ 65000 Btuh and lt135000 Btuh

135000 Btuhand lt240000 Btuh

240000 Btuh and lt760000 Btuh

760000 Btuh

154

142

135

125

123

Chiller Capacity Path APath B efficiency (kWton )

lt 150 tons

~150 tons and lt300 tons

300 tons and lt400 tons

400 tons and lt600 tons

600 tons

lt75 tons

~75 tons and lt150 tons

~150 tons and lt300 tons

~300 tons and lt600 tons

600 tons

0610 FU0695 FL and 0550 IPLV0440 IPLV

0610 FU0635 FL and 0550 IPLV0400 IPLV

0560 FU0595 FL and 0520 IPLV0390 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

Path APath B efficiency (kWton )

0750 FU0780 FL and 0600 IPLV0500 IPLV

0720 FU0750 FL and 0560 IPLV0490 IPLV

0660 FU0680 FL and 0540 IPLV0440 IPLV

0610 FU0625 FL and 0520 IPLV0410 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

Data Centers Data Center incentives are available for facilities ranging in size from office server closets to large standalone facilities

Air Cooled Chiller Path APath B EER (BtuWh) lt150 tons 101 FL97 FL and 137 IPLV158 IPLV ge150 tons 101 FL97 FL and 140 IPLV161 IPLV

Air Cooled Chiller without Condenser Air-cooled chillers without condenser must be rated with matching condensers and comply with air-cooled chiller efficiency requirements

Computer Room Air Conditioner

Computer Room Air Handler Variable Speed Replacing constant speed CRAH with VSD CRAH

Water Cooled Centrifugal Chiller

Water Cooled Positive Displacement or Reciprocating Chiller

Uninterruptible Power Supply Must be Energy Star Certified UPS or have full load efficiency rating

ge948 for 20-100 kVA ge978for ge100 kVA

Mainframe Refresh The rated efficiency of the replacement Mainframes power supply must be at least 8 more

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 42

- Equipment Type Units IncentiveUnit

D1 Air Cooled Chiller Ton $4000 D2 Air Cooled Chiller W ithout Condenser Ton $2000 D3 Computer Room Air Conditioner Ton $3000 D4 Computer Room Air Handler Variable Speed Ton $1000 D5 Water Cooled Centrifugal Chiller Ton $3000 D6 Water Cooled Positive Displacement or Reciprocatin $3000 D7 Uninterruptible Power Supply 20-100 kVA $1000 D8 Uninterruptible Power Supply gt 100 kVA $1000 D9 Mainframe Refresh $2000

D10 Server Refresh $2000 D11 PC Power Managment System $600 D12 HVAC System Optimization $005 D1 3 HoUCold Aisle Containment kWh saved $005 D14 Server Virtualization kW reduction $40000 D1 5 Thin Clients Units $500

efficient compared to the existing Mainframes power supply The replacement Mainframe if Inactive must be decommissioned and removed from the Data Center

Server Refresh Replacement servers must be ENERGY STARreg certified Replacement servers power supply must be 5 more efficiency compared to the power supply of the replaced servers The replaced server must be decommissioned and removed from the data center

HVAC System Optimization Final system must have these features

-Implementation of free cooling by the addition of an economizer system -Conversion of constant speed CRACCRAH into variable speed operations using VFDs and additional control functionalities and -Elevation of exhaust air temperature

HotCold Aisle Containment Includes both Hot and Cold Aisles Installing new containment measures not replacing already existed aisle containment Plenum-only installations not eligible Must result in higher difference between the return air (hot aisle) and supply air (cold aisle) temperatures measured at rack intake and exhaust locations

Server Virtualization Minimum of consolidating 5 Servers virtualized into one Server The virtualized servers if inactive are removed from the Data Center

Thin Clients Must be ENERGY STAR certified thin clients Decommissioned clients are removed from the Data Center

Data Center Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 43

Whole Building Systems Whole Building Systems Approach

The Whole Building Systems approach is intended to encourage integrated energy efficient designs by providing enhanced incentives to the customer who addresses overall energy performance Owners of eligible and qualifying new construction and major renovation projects can receive Whole Building Systems incentives when energy modeling indicates the projectrsquos performance is over 10 better than the ASHRAE 901-2007 Savings from eligible electric end-uses in kilowatt hours define the amount of financial incentive Energy savings achieved through renewable energy sources are not counted toward project energy savings and are not included in the savings basis Incentive reservations obtained during the design phase of a project will be honored for up to 24 months

How to Apply for Whole Building Systems Incentives Before construction begins bull A Pre-notification Application must be submitted documenting the Owners intention to

seek Whole Building Systems incentives bull The Owner must confirm the goals and energy efficiency strategies being pursued by the

design team on the completed Pre-notification Worksheet (Checklist tab) and in the project Summary (Whole Building Performance Summary tab)

bull Submit executable building modeling software files bull Submit the Whole Building Performance Summary worksheet energy simulation model

inputs and outputs and supporting documentation bull Receive confirmation and eligibility notification from the PECO Smart Ideas team and

receive an incentive reservation bull The final incentive paid may differ from the reserved incentive amount The final

incentive will be calculated based on site-verified equipment installation and performance The Owners final application and complete documentation must be received within 6 months of equipment installation or certificate of occupancy whichever is later

bull An executable energy model and model output demonstrating compliance with the criteria of ASHRAE 901-2007 Appendix G will be required and the equipment data sheets LED lighting fixtures must be on the DLC or Energy STAR qualified products list (QPL) to be eligible LED fixtures not on the DLC or Energy STAR QPL has the option of submitting LM79 and LM80 test reports for evaluation against DLC and Energy STAR eligibility criteria

During the construction period bull Owner and design team continue to work closely with their chosen contractor to assure

energy efficiency measures are included and installed in the completed building

When the building is constructed and operational bull Complete the Owner final application Request an equipment verification site visit by the

PECO Smart Ideas team Equipment must be installed and fully operational o Program staff will schedule a site visit and utilize submitted documentation and

measurement tools to verify that the installation follows the submitted energy simulation model

bull When PECO confirms that there are no significant changes to the installed equipment payment of the reserved incentive will be made to the Owner within 6 weeks

bull If changes from the proposed design energy simulation are found the Owner and design team will be notified of the reduced incentive amount a period of 20 calendar days will

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 44

Improvement Incentive per Sq Ft

over Code

~11 to lt20 $0155

~20 to lt30 $0233

~30 to lt40 $0350

~40 to lt60 $0525

~60 $0700

be allowed for supplemental information to be provided if no additional information is received by PECO Smart Ideas team the reduced incentive payments will be made and sent to the Owner if additional clarification and information is available program staff will work diligently to resolve the discrepancies and arrive at a reasonable incentive adjustment with the customer

Payments made by PECO Smart Ideas are final

Customer Eligibility The Owner of the proposed new building project must be a customer of PECO and receive delivery of electric service from PECO to receive kilowatt-hour based incentives Please note that electricity supply can be provided by any vendor

Project Eligibility bull The project must be a new construction or major renovation Major renovations involving

the removal and redesign of at least two building systems (such as interior lighting and mechanical systems) may apply for Whole Building Systems incentives

bull To qualify for incentives projects must demonstrate energy efficiency enhancements that achieve at least 11 improvement in the proposed design versus the standard baseline

bull The Owner must submit a Pre-approval Application to the program at the stage where changes for increased energy efficiency are still feasible and construction has not been completed

bull Projects receiving Whole Building Systems incentives are not eligible to receive other incentives such as the prescriptive or custom program incentives for the same scope

bull Project components that are NOT eligible for consideration as a basis for PECO Smart Ideas include the following o Alternative fuel sources (eg use of gas or oil equipment in lieu of electric) Please note

that combined heat and power (CHP) systems will be incentivized for the electricity they produce

o Renewable energy sources (eg solar wind biomass) bull Ineligible savings include exterior lighting process receptacle miscellaneous loads and

other unregulated end-uses Custom incentives are available for new construction exterior lighting

Whole Building Systems Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 45

Custom Project Specifications Instructions for Energy Savings Calculations for Custom Projects Custom projects must involve measures that result in a reduction in electric energy use (kWh) Electricity savings may result from either efficiency improvements or fuel switching Custom Incentives are based on the first year kilowatt-hour savings Custom applications must be accompanied by detailed engineering calculations that document the annual total energy savings

The following serve as guidelines for the minimum required documentation

Equipment Information Submittals bull A list of the present and proposed equipment and components to be installed

including manufacturerrsquos catalogmodel number bull Manufacturerrsquos specification sheets showing capacities and performance for all major

components

Energy Savings Calculations Provide calculations documenting the predicted energy consumption of the existing (or baseline) and proposed system using appropriate analytical tools and clearly stated assumptions Calculations may be performed by ldquohandrdquo but spreadsheet analysis or more rigorous modeling is preferred All analysis should be provided in electronic format All assumptions such as operating hours existing and proposed equipment operational details must be presented Engineering algorithms and procedures from recognized technical organizations such as ASHRAE SMACNA ANSI etc must be used Use rated performance factors tested under accepted procedures specified by recognized rating agencies such as AHRI ANSI ASTM etc Provide an explanation when equipment performance rating conditions vary from standard conditions

In support of the calculations extensive documentation must be provided that provides the basis for the savings estimates The documentation must provide information on the equipment operating schedule daily and seasonal load profile and baseline AND energy efficient equipment performance at the operating loads Typical documentation for custom projects often includes bull Engineering or architectural drawings and ldquoequipment schedulerdquo sheets bull Component specification sheets that include part load efficiency or performance

factors bull Spreadsheet calculations or inputoutput files and results from system modeling or

other engineering analysis using accepted engineering algorithms and practices bull Log sheets trend logs from a building management system or other operating

documentation that are often necessary to document operating hours and equipment loading and used as a basis for the calculations (in some cases short term monitoring may be required to document the load profile)

bull Control sequence of operations that are necessary where controls play a part in the savings equation

Additional documentation other than that described in the application may be required for program participation Larger projects may also require pre- and post-project sub metering or monitoring of loads andor power input as part of another measurement and verification activity to demonstrate the actual energy savings that are realized

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 46

Baseline for Custom Analysis Where equipment is replaced prior to the end of its rated service life in order to achieve energy savings the existing equipment performance may be used as the baseline in the energy savings calculations Where equipment is replaced due to failure or for other reasons (such as obsolescence or a need for more capacity) the baseline performance used in the savings calculation should be either the minimum performance that would be required by code for that equipment type and application (where a code applies) or the performance of the equipment that would have been selected as the customers standard practice when a code does not apply

Baseline or Existing System Summary On custom worksheet on application form include make model number name plate information (such as operating voltage and rated full load amps) rated capacity quantities equipment condition and age facility operating hours equipment operating schedule and load curves If needed attach separate sheets

All decisions regarding incentives for custom projects are in the sole discretion of PECO

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 47

APPENDIX PROGRAM UPDATES SUMMARY (Q1 2017) Multifamily Nursing Home and Assisted Living retrofit customers need to apply for incentives through the PECO Smart Ideas Multi-Family Program administered by Franklin Energy For more information please contact Taylor Adler at tadlerfranklinenergycom or call 1-844-4BIZ-SAVE Multifamily Nursing Home and Assisted Living new construction customers can proceed with applying for incentives here

Revised Incentives

Data Centers

Measure Incentive Effective Immediately Previous Incentive

Air-cooled chiller for data centers $40ton $10ton Air-cooled chiller without condenser for data centers $20ton $10ton

Computer room air conditioner $30ton $7ton Water-cooled centrifugal chiller for data centers $30ton $5ton Water-cooled positive displacement or reciprocating chiller for data centers

$30ton $5ton

Uninterruptible power supply 20-100 kVA $10kVA $6kVA Uninterruptible power supply gt100 kVA $10kVA $1kVA Mainframe refresh $20kW installed $5kW installed Server refresh $20kW installed $4kW installed Server virtualization $400kW reduction $4kW reduction Thin clients $5units $4units

Lighting (Effective Immediately)

Measure Incentive Effective Immediately Specification Previous

Incentive Specification

New construction exterior LED outdoor flood light LED parking garage and canopy lighting LED polearm mounted parking and roadway lighting LED wall mount fixture

$005kWh (custom)

Lighting Power Density (LPD) Requirements Unchanged

$10-54 fixture

Lighting Power Density (LPD) (Wft2) by Space Type or Building Area

LED Replacement Lamps (Tubes) 2

$250lamp 5 Min Watts Reduced

$250lamp 6 Min Watts Reduced

LED Replacement Lamps (Tubes) 4

$400lamp 10 Min Watts Reduced

$400lamp 12 Min Watts Reduced

Permanent Fixture Removal $010Watt removed

Clarification of calculation to represent actual Wattage removed

$010Watt removed

Lighting (Effective 6117)

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 48

Measure Incentive Effective 6117 Specification Previous

Incentive Previous Specification

Interior LED high-bay fixtures andor retrofit kits if lt 20000 LED Lumens

$50fixture 150 Min Watts Reduced

$75fixture 150 Min Watts Reduced

Interior LED high-bay fixtures andor retrofit kits if gt 20000 LED Lumens

$75fixture 225 Min Watts Reduced

$75fixture 150 Min Watts Reduced

New Incentives

Compressed Air

Measure New Incentive Effective Immediately Variable speed air compressor $30compressor HP Compressed air system optimization $50compressor HP

HVAC

Measure New Incentive Effective Immediately ECM circulation pump $50pump Retro-commissioning cooling systems $750ton Retro-commissioning whole building $010square foot Energy management system $25ton Demand controlled ventilation $25ton Water-cooled air conditioner $22ton

Food Service

Measure New Incentive Effective Immediately Combination oven $200unit ENERGY STARreg commercial convection oven $150unit ENERGY STARreg commercial fryers $100unit ENERGY STARreg commercial hot holding cabinet $200unit

Refrigeration

Measure New Incentive Effective Immediately Air-cooled refrigeration condenser $10ton Oversized condenser with VFD $10ton Case light occupancy controls $750door

Lighting

Measure New Incentive Effective Immediately Interior central lighting controls $00175sq foot

Motors and Drives

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 49

-

Measure New Incentive Effective Immediately VFD for dust collection system motor $50HP

Application Clarifications and Revised Requirements

Clarification of LED Eligibility for New Construction or Retrofit Projects

LED Eligibility is determined by whether lighting products are listed in either the DesignLights Consortium (DLC) Qualified Products List of commercial-grade LED luminaires or the US Environmental Protection Agency database of ENERGY STAR certified products For products not yet listed contractors may submit LM79 and LM80 test reports PECO Smart Ideas engineers will review test reports to determine if the product in question meets performance specifications

Revised W 9 Requirement

W-9 forms EIN numbers are no longer required

Deletion of erroneous statement in New Construction Lighting

The following statement from previous Business Manual has been deleted ldquoThe minimum lighting power density used to calculate the incentive shall be no lower than 50 of the ASHRAE 901-2007 valuerdquo

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 50

  • Commercial amp Industrial Program Application Manual
    • Follow This Easy Process
      • Pre-Approval Application Checklist
      • Final Application Checklist
          • Terms and Conditions
            • Program Effective Dates
            • Program and Project Eligibility
            • Incentive Payment Limits
            • Application Review Process
            • Inspections andor PUCrsquos Statewide Program Evaluation
            • Requirements for Custom Project Electricity Savings Calculation
            • Tax Liability
            • No Endorsement
            • Warranties
            • Limitation of Liability
            • Assignment
            • Customerrsquos Certification
            • Termination
            • Acknowledgement
              • Retrofit Lighting Solutions
                • General Linear Fluorescent Lamp and Ballast Specification Requirements
                • LED Lamps and Fixtures
                • Minimum Watts Reduced
                • Linear LED (Tubes)
                • Permanent Fixture Removal
                  • LED Traffic Signals
                    • LED Traffic Signals Incentive Table
                      • New Construction Lighting Specifications
                        • New Construction Lighting Incentives Table
                          • New Construction Lighting Power Density Code
                              • Exterior New Construction Lighting
                              • HVAC Equipment
                                • Air-Source Air Conditioners and Air-Source Heat Pumps
                                • Package Terminal Systems (Replacements)
                                • Ductless Mini-Split Heat Pump lt54 Tons
                                • Geothermal Heat Pump
                                  • Other HVAC Equipment
                                    • Hotel Guest Room Occupancy Sensor
                                    • ECM Circulation Fan
                                    • ECM Circulation Pump
                                    • Retrocomissioning Cooling Systems
                                    • Retrocomissioning Whole Building
                                    • Energy Management System
                                    • Demand Controlled Ventilation
                                    • Other HVAC Incentives Table
                                      • Unitary HVAC Chillers
                                        • Air-Cooled Chillers Water Cooled Positive Displacement Reciprocating Chillers and Water Cooled Centrifugal Chillers
                                          • Refrigeration
                                            • Anti-Sweat Heater Controls
                                            • Evaporator Fan Controls
                                            • Floating Head Pressure Controls
                                            • Automatic Door Closers for Walk-In Coolers and Freezers
                                            • EC Motor for Walk-inReach-in Refrigerated cases or Freezer cases
                                            • ENERGY STAR Solid Door Freezer and Glass Door Freezer and Refrigerators
                                            • Refrigeration Suction Pipe Insulation
                                            • Night Cover
                                            • Strip Curtain on Walk-In CoolerFreezer
                                            • Evaporator Coil Defrost Control
                                            • Variable Speed Refrigeration Compressor
                                            • Add Doors to Open Refrigerated Cases
                                            • Door Gaskets
                                            • Zero Energy Doors
                                            • Air Cooled Refrigeration Condenser
                                            • Oversized Condenser with VFD
                                            • Case Light Occupancy Controls
                                            • LED Open Case Lighting
                                            • LED Enclosed Case Lighting Refrigerated
                                            • LED Enclosed Case Lighting Freezer
                                              • Food Service
                                                • Beverage and Snack Machine Controls
                                                • ENERGY STARreg Refrigerated Beverage Vending Machines
                                                • ENERGY STARreg Electric Steam Cooker
                                                • ENERGY STARreg Electric Combination Oven
                                                • ENERGY STARreg Commercial Convection Oven
                                                • ENERGY STARreg Commercial Fryers
                                                • ENERGY STARreg Commercial Hot Holding Cabinet
                                                  • Motors and Variable Frequency Drives
                                                    • Early Replacement Motors
                                                    • Variable Frequency Drives on HVAC Fan Applications
                                                    • Variable Frequency Drives on Pump Applications
                                                    • Variable Speed Control for Kitchen Exhaust Hoods
                                                    • Variable Speed Drives for Process or Other Equipment
                                                      • Domestic Hot Water
                                                        • Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater
                                                        • Heat Pump Water Heater
                                                        • Low Flow Pre-Rinse Spray Valve
                                                        • Domestic Hot Water Incentive Table
                                                          • Compressed Air Systems
                                                            • No-loss Condensate Drain
                                                            • Air-Entraining air nozzle
                                                            • Storage Tanks for LoadNo Load Screw Compressors
                                                            • Cycling Refrigerated Thermal Mass Dryer
                                                            • Variable Speed Air Compressor
                                                            • Compressed Air System Optimization
                                                            • Compressed Air Systems Incentive Table
                                                              • Data Centers
                                                                • Air Cooled Chiller
                                                                • Air Cooled Chiller without Condenser
                                                                • Computer Room Air Conditioner
                                                                • Computer Room Air Handler Variable Speed
                                                                  • Replacing constant speed CRAH with VSD CRAH
                                                                    • Water Cooled Centrifugal Chiller
                                                                    • Water Cooled Positive Displacement or Reciprocating Chiller
                                                                    • Uninterruptible Power Supply
                                                                    • Mainframe Refresh
                                                                    • Server Refresh
                                                                      • Whole Building Systems
                                                                        • Whole Building Systems Approach
                                                                        • How to Apply for Whole Building Systems Incentives
                                                                        • Customer Eligibility
                                                                        • Project Eligibility
                                                                        • Whole Building Systems Incentives Table
                                                                          • Custom Project Specifications
                                                                            • Instructions for Energy Savings Calculations for Custom Projects
                                                                            • Equipment Information Submittals
                                                                            • Energy Savings Calculations
                                                                            • Baseline for Custom Analysis
                                                                            • Baseline or Existing System Summary

Food Service Beverage and Snack Machine Controls Incentives are offered for refrigerated vending machines that contain non-perishable bottled and canned beverages Controller for both types of systems must include a passive infrared occupancy sensor to turn off fluorescent lights and other energized machine systems when the surrounding area is unoccupied for 15 minutes or longer For the refrigerated machines the control logic may include periodic power up at 2-hour intervals or longer to maintain product temperature and provide compressor protection

ENERGY STARreg Refrigerated Beverage Vending Machines Incentives are offered for ENERGY STARreg beverage vending machines Qualifying machines can be found at httpswwwenergystargovproductsothervending_machines

ENERGY STARreg Electric Steam Cooker This measure applies to the installation of electric ENERGY STAR steam cookers as either a new item or replacement for an existing unit Gas steam cookers are not eligible The steam cookers must meet minimum ENERGY STAR efficiency requirements A qualifying steam cooker must meet a minimum cooking efficiency of 50 percent and meet idle energy rates specified by pan capacity

ENERGY STARreg Electric Combination Oven This measure applies to electric ovens capable of handling single 12 x 20 x 25 pan per rack

ENERGY STARreg Commercial Convection Oven The oven must meet or exceed heavy load potato cooking energy efficiency of greater than 70 utilizing ASTM Standard F149 Applies only to electric ovens

ENERGY STARreg Commercial Fryers The commercial fryer must have a tested heavy load (French fry for large vats) cooking energy efficiency of greater than 80 utilizing American Society for Testing and Materials (ASTM) Standard F1361 for commercial fryers and ASTM Standard F2144 for large vat fryers Multiple vat configurations are paid per qualifying vat ENERGY STAR maintains a list of qualifying products and specifications at httpwwwenergystargov

ENERGY STARreg Commercial Hot Holding Cabinet Energy STAR rating electric

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 36

Food Service amp Other Measures FoodOther

Measure Incentive Unit Incentive

Measure Code Unit

F01 Beverage Machine Controls Unit $25

F02 Snack Machine Controls Unit $20

F03 ENERGY STARreg Refrigerated Beverage Vending Machir Unit $125

F04 ENERGY STARreg Commerc ial Steam Cooker Unit $200

F05 ENERGY STARreg Electric Combination Oven Unit $200

F06 ENERGY STARreg Commercial Electric Convection Oven Unit $150

F07 ENERGY STARreg Commerc ial Fryers Unit $100

F08 ENERGY STARregCommerc ial Hot Holding Cabinet Unit $200

Food Service Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 37

Motors and Variable Frequency DrivesEarly Replacement Motors For constant speed and uniformly loaded motors this measure applies to the replacement of old motors with new energy efficient motors of the same rated horsepower Old motors must be less than 15 years Replacements where the old motor and new motor have different horsepower ratings are considered custom measures Motors with variable speeds variable loading or industrial-specific applications are also considered custom measures

Motors Incentive Table Motors

Measure Code

HP Incentive per Motor

M01 15 - 10 $40 M02 11 - 50 $100 M03 51-100 $150 M04 gt100 $300

Only VFDs on unitary systems are eligible Non-unitary systems must be submitted as a custom measure Soft start motors are not eligible

Variable Frequency Drives on HVAC Fan Applications Incentives are offered for installing VFDs on existing HVAC fans that do not have pre-existing VFDs This measure applies to HVAC supply and return fans only All other fans including cooling tower fans must be submitted as custom measures Manually fixed speed settings on HVAC fans must be submitted via custom application The VFD must control motor speed automatically in response to pressure flow temperature or other variable signal The installation of a VSD must accompany the permanent removal or disabling of any throttling devices such as inlet vanes bypass dampers and throttling valves etc The incentive is offered per controlled HP

Variable Frequency Drives on Pump Applications Incentives are offered for installing VFDs on existing chilled water pumps and heating hot water pumps that do not have existing VFDs This measure applies to chilled water pumps and heating hot water pumps only All other pumps must be submitted as custom measures Manually fixed speed settings on pumps must be submitted via custom application The VFD must control motor speed automatically in response to pressure flow temperature or other variable signal The installation of a VSD must accompany the permanent removal or disabling of any throttling devices such as throttling valves The incentive is offered per controlled HP

Variable Speed Control for Kitchen Exhaust Hoods The measure consists of installing a new VSD in conjunction with a sensor control system that varies the exhaust rate of kitchen ventilation (exhaust andor makeup air fans) based on the heat and effluent output from the cooking appliances (ie the more heat and smokevapors generated the more ventilation needed) This involves installing a temperature sensor in the hood exhaust collar andor an optic sensor on the end of the hood that senses cooking conditions and allows the system to automatically vary the rate of exhaust to match requirements by adjusting the fan speed accordingly

Variable Speed Drives for Process or Other Equipment VFD must be used in conjunction with a process (non HVAC) application To qualify for this incentive the driven equipment must operate at least 2000 hours per year Redundant or back- up units do not qualify VFDs replacing existing VFDs do not qualify The VFD must control motor

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 38

speed automatically in response to pressure flow temperature or other variable signal VFDs installed as ldquosoft startrdquo without automatic manual closed loop speed control do not qualify The installation of a VFD must accompany the permanent removal or disabling of any throttling devices such as throttling valves The incentive is per controlled HP and only applies to controlled motors less than 50 HP

VSDVFD Incentives Table VFD

Measure Code

Measure Unit Incentive per Unit

Fan Application

V01 VFD on HVAC Fan HP $25 Pump Application

Variable Speed Control for Kitchen Exhaust Hoods

Variable Speed Drives for Process or Other Equipment

V02 VFD on Chilled Water Pumps HP $25 V03 VFD on Heating Hot Water Pumps HP $25

V04 Kitchen Exhaust Fan Retrofit Hood HP $500

V05 Process Motor lt 50 HP HP $50

Domestic Hot Water Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater This measure documents the energy savings attributed to converting from a standard electric water heater to an ENERGY STAR natural gaspropane-fired water heater or a standard oil-fired water heater with an Energy Factor of 0585

Heat Pump Water Heater This includes heat pump water heaters with energy factors meeting ENERGY STAR criteria The measure described here involves a direct retrofit of a resistive electric water heater with a heat pump water heater It does not cover systems where the heat pump is a pre-heater or is combined with other water heating sources More complicated installations can be treated as custom projects

Low Flow Pre-Rinse Spray Valve This measure applies to efficient low flow pre-rinse sprayers in grocery and food service applications The most likely areas of application are kitchens in restaurants and hotels Only premises with electric water heating may qualify for this incentive In addition the replacement pre-rinse spray nozzle must use less than 16 gallons per minute with a cleanability performance of 26 seconds per plate or less Low flow pre-rinse sprayers reduce hot water usage and save energy associated with water heating

Domestic Hot Water Incentive Table

Measure Code Measure Unit Retrofit Incentive per

Unit

W01 Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater Unit $100

W02 Heat Pump Water Heater Unit $100 W03 Low-Flow Pre-Rinse Spray Valve Valve $17

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 39

Compressed Air SystemsNo-loss Condensate Drain No-loss Condensate Drains are controlled by a sensor that monitors the level of condensate and only open when there is a need to drain condensate They close before compressed air is allowed to escape This measure is targeted to non-residential customers whose equipment is a timed drain that operates on a pre-set schedule Acceptable baseline conditions are compressed air systems with standard condensate drains operated by a solenoid and timer

Air-Entraining air nozzle This measure is targeted to non-residential customers whose compressed air equipment uses stationary air nozzles in a production application with an open copper tube of 18rdquo or 14rdquo orifice diameter Energy efficient conditions require replacement of an inefficient non-air entraining air nozzle with an energy efficient air-entraining air nozzle that use less than 15 CFM at 100 psi for industrial applications

Storage Tanks for LoadNo Load Screw Compressors This measure protocol applies to the installation of air receivers with pressureflow controls to loadno load compressors Loadno load compressors unload when there is low demand The process of unloading is done over a period of time to avoid foaming of the lubrication oil Using a storage tank with pressureflow control will buffer the air demands on the compressor Reducing the number of cycles in turn reduces the number of transition times from load to no load and saves energy The baseline equipment is a loadno load compressor with a 1 galcfm storage ratio or a modulating compressor with blowdown The high efficiency equipment is a loadno load compressor with a minimum storage ratio of 4 gallons of storage per cfm

Cycling Refrigerated Thermal Mass Dryer When air is compressed water vapor in the air condenses and collects in liquid form Some of this condensate collects in the air distribution system and can contaminate downstream components such as air tools with rust oil and pipe debris Refrigerated air dryers remove the water vapor by cooling the air to its dew point and separating the condensate Changes in production and seasonal variations in ambient air temperature lead to partial loading conditions on the dryer Standard air dryers use a hot gas bypass system that is inefficient at partial loads A Cycling Thermal Mass Dryer uses a thermal storage medium to store cooling capacity when the system is operated at partial loads allowing the dryer refrigerant compressor to cycle

This measure is targeted to non-residential customers whose equipment is a non-cycling refrigerated air dryer with a capacity of 600 cfm or below Acceptable baseline conditions are a non-cycling (eg continuous) air dryer with a capacity of 600 cfm or below The replacement of desiccant deliquescent heat-of-compression membrane or other types of dryers does not qualify under this measure

Variable Speed Air Compressor This type of compressor uses a special drive to control the speed (RPM) of the unit which in turn saves energy compared to a fixed speed equivalent

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 40

No-loss Condensate Drain Air-Entraining Air Nozzle Cycling Refrigerated Thermal Mass Dryer

Compressor Incentive per

Equipment Type Units Quantity Daily Operating Unit

Hours

CA04 Storage Tanks for LoadNo Load Screw

Compressor HP $10 Compressors

CA05 Variable Speed Air Compressor

Compressor HP $30

CA06 Compressed Air System Optimization

Compressor HP $50

Compressed Air System Optimization The submitted optimization measures must be identified in an Air System Audit or equivalent study to be eligible The measures must demonstrate energy savings as evaluated by a Program Engineer Additionally measures must also fall under one or more of the category below to be eligible

1) Install storage Receivers (new receivers only replacing existing storage receivers are ineligible)

2) Compressor control (must demonstrate improvement in partial load efficiency of the compress air system including reduceeliminate partially loaded units)

3) Dryer control 4) Source pressure reduction 5) Right-sizing distribution components such as piping filters regulators

connectors and hoses (routine maintenance replacements are ineligible) 6) Leakage detection and repair 7) Eliminate low-efficiency end-usages of compressed air 8) Heat recovery (most reduce electricity consumption of the replaced heat source)

Compressed Air Systems Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 41

lt65000 Btuh

~ 65000 Btuh and lt135000 Btuh

135000 Btuhand lt240000 Btuh

240000 Btuh and lt760000 Btuh

760000 Btuh

154

142

135

125

123

Chiller Capacity Path APath B efficiency (kWton )

lt 150 tons

~150 tons and lt300 tons

300 tons and lt400 tons

400 tons and lt600 tons

600 tons

lt75 tons

~75 tons and lt150 tons

~150 tons and lt300 tons

~300 tons and lt600 tons

600 tons

0610 FU0695 FL and 0550 IPLV0440 IPLV

0610 FU0635 FL and 0550 IPLV0400 IPLV

0560 FU0595 FL and 0520 IPLV0390 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

Path APath B efficiency (kWton )

0750 FU0780 FL and 0600 IPLV0500 IPLV

0720 FU0750 FL and 0560 IPLV0490 IPLV

0660 FU0680 FL and 0540 IPLV0440 IPLV

0610 FU0625 FL and 0520 IPLV0410 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

Data Centers Data Center incentives are available for facilities ranging in size from office server closets to large standalone facilities

Air Cooled Chiller Path APath B EER (BtuWh) lt150 tons 101 FL97 FL and 137 IPLV158 IPLV ge150 tons 101 FL97 FL and 140 IPLV161 IPLV

Air Cooled Chiller without Condenser Air-cooled chillers without condenser must be rated with matching condensers and comply with air-cooled chiller efficiency requirements

Computer Room Air Conditioner

Computer Room Air Handler Variable Speed Replacing constant speed CRAH with VSD CRAH

Water Cooled Centrifugal Chiller

Water Cooled Positive Displacement or Reciprocating Chiller

Uninterruptible Power Supply Must be Energy Star Certified UPS or have full load efficiency rating

ge948 for 20-100 kVA ge978for ge100 kVA

Mainframe Refresh The rated efficiency of the replacement Mainframes power supply must be at least 8 more

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 42

- Equipment Type Units IncentiveUnit

D1 Air Cooled Chiller Ton $4000 D2 Air Cooled Chiller W ithout Condenser Ton $2000 D3 Computer Room Air Conditioner Ton $3000 D4 Computer Room Air Handler Variable Speed Ton $1000 D5 Water Cooled Centrifugal Chiller Ton $3000 D6 Water Cooled Positive Displacement or Reciprocatin $3000 D7 Uninterruptible Power Supply 20-100 kVA $1000 D8 Uninterruptible Power Supply gt 100 kVA $1000 D9 Mainframe Refresh $2000

D10 Server Refresh $2000 D11 PC Power Managment System $600 D12 HVAC System Optimization $005 D1 3 HoUCold Aisle Containment kWh saved $005 D14 Server Virtualization kW reduction $40000 D1 5 Thin Clients Units $500

efficient compared to the existing Mainframes power supply The replacement Mainframe if Inactive must be decommissioned and removed from the Data Center

Server Refresh Replacement servers must be ENERGY STARreg certified Replacement servers power supply must be 5 more efficiency compared to the power supply of the replaced servers The replaced server must be decommissioned and removed from the data center

HVAC System Optimization Final system must have these features

-Implementation of free cooling by the addition of an economizer system -Conversion of constant speed CRACCRAH into variable speed operations using VFDs and additional control functionalities and -Elevation of exhaust air temperature

HotCold Aisle Containment Includes both Hot and Cold Aisles Installing new containment measures not replacing already existed aisle containment Plenum-only installations not eligible Must result in higher difference between the return air (hot aisle) and supply air (cold aisle) temperatures measured at rack intake and exhaust locations

Server Virtualization Minimum of consolidating 5 Servers virtualized into one Server The virtualized servers if inactive are removed from the Data Center

Thin Clients Must be ENERGY STAR certified thin clients Decommissioned clients are removed from the Data Center

Data Center Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 43

Whole Building Systems Whole Building Systems Approach

The Whole Building Systems approach is intended to encourage integrated energy efficient designs by providing enhanced incentives to the customer who addresses overall energy performance Owners of eligible and qualifying new construction and major renovation projects can receive Whole Building Systems incentives when energy modeling indicates the projectrsquos performance is over 10 better than the ASHRAE 901-2007 Savings from eligible electric end-uses in kilowatt hours define the amount of financial incentive Energy savings achieved through renewable energy sources are not counted toward project energy savings and are not included in the savings basis Incentive reservations obtained during the design phase of a project will be honored for up to 24 months

How to Apply for Whole Building Systems Incentives Before construction begins bull A Pre-notification Application must be submitted documenting the Owners intention to

seek Whole Building Systems incentives bull The Owner must confirm the goals and energy efficiency strategies being pursued by the

design team on the completed Pre-notification Worksheet (Checklist tab) and in the project Summary (Whole Building Performance Summary tab)

bull Submit executable building modeling software files bull Submit the Whole Building Performance Summary worksheet energy simulation model

inputs and outputs and supporting documentation bull Receive confirmation and eligibility notification from the PECO Smart Ideas team and

receive an incentive reservation bull The final incentive paid may differ from the reserved incentive amount The final

incentive will be calculated based on site-verified equipment installation and performance The Owners final application and complete documentation must be received within 6 months of equipment installation or certificate of occupancy whichever is later

bull An executable energy model and model output demonstrating compliance with the criteria of ASHRAE 901-2007 Appendix G will be required and the equipment data sheets LED lighting fixtures must be on the DLC or Energy STAR qualified products list (QPL) to be eligible LED fixtures not on the DLC or Energy STAR QPL has the option of submitting LM79 and LM80 test reports for evaluation against DLC and Energy STAR eligibility criteria

During the construction period bull Owner and design team continue to work closely with their chosen contractor to assure

energy efficiency measures are included and installed in the completed building

When the building is constructed and operational bull Complete the Owner final application Request an equipment verification site visit by the

PECO Smart Ideas team Equipment must be installed and fully operational o Program staff will schedule a site visit and utilize submitted documentation and

measurement tools to verify that the installation follows the submitted energy simulation model

bull When PECO confirms that there are no significant changes to the installed equipment payment of the reserved incentive will be made to the Owner within 6 weeks

bull If changes from the proposed design energy simulation are found the Owner and design team will be notified of the reduced incentive amount a period of 20 calendar days will

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 44

Improvement Incentive per Sq Ft

over Code

~11 to lt20 $0155

~20 to lt30 $0233

~30 to lt40 $0350

~40 to lt60 $0525

~60 $0700

be allowed for supplemental information to be provided if no additional information is received by PECO Smart Ideas team the reduced incentive payments will be made and sent to the Owner if additional clarification and information is available program staff will work diligently to resolve the discrepancies and arrive at a reasonable incentive adjustment with the customer

Payments made by PECO Smart Ideas are final

Customer Eligibility The Owner of the proposed new building project must be a customer of PECO and receive delivery of electric service from PECO to receive kilowatt-hour based incentives Please note that electricity supply can be provided by any vendor

Project Eligibility bull The project must be a new construction or major renovation Major renovations involving

the removal and redesign of at least two building systems (such as interior lighting and mechanical systems) may apply for Whole Building Systems incentives

bull To qualify for incentives projects must demonstrate energy efficiency enhancements that achieve at least 11 improvement in the proposed design versus the standard baseline

bull The Owner must submit a Pre-approval Application to the program at the stage where changes for increased energy efficiency are still feasible and construction has not been completed

bull Projects receiving Whole Building Systems incentives are not eligible to receive other incentives such as the prescriptive or custom program incentives for the same scope

bull Project components that are NOT eligible for consideration as a basis for PECO Smart Ideas include the following o Alternative fuel sources (eg use of gas or oil equipment in lieu of electric) Please note

that combined heat and power (CHP) systems will be incentivized for the electricity they produce

o Renewable energy sources (eg solar wind biomass) bull Ineligible savings include exterior lighting process receptacle miscellaneous loads and

other unregulated end-uses Custom incentives are available for new construction exterior lighting

Whole Building Systems Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 45

Custom Project Specifications Instructions for Energy Savings Calculations for Custom Projects Custom projects must involve measures that result in a reduction in electric energy use (kWh) Electricity savings may result from either efficiency improvements or fuel switching Custom Incentives are based on the first year kilowatt-hour savings Custom applications must be accompanied by detailed engineering calculations that document the annual total energy savings

The following serve as guidelines for the minimum required documentation

Equipment Information Submittals bull A list of the present and proposed equipment and components to be installed

including manufacturerrsquos catalogmodel number bull Manufacturerrsquos specification sheets showing capacities and performance for all major

components

Energy Savings Calculations Provide calculations documenting the predicted energy consumption of the existing (or baseline) and proposed system using appropriate analytical tools and clearly stated assumptions Calculations may be performed by ldquohandrdquo but spreadsheet analysis or more rigorous modeling is preferred All analysis should be provided in electronic format All assumptions such as operating hours existing and proposed equipment operational details must be presented Engineering algorithms and procedures from recognized technical organizations such as ASHRAE SMACNA ANSI etc must be used Use rated performance factors tested under accepted procedures specified by recognized rating agencies such as AHRI ANSI ASTM etc Provide an explanation when equipment performance rating conditions vary from standard conditions

In support of the calculations extensive documentation must be provided that provides the basis for the savings estimates The documentation must provide information on the equipment operating schedule daily and seasonal load profile and baseline AND energy efficient equipment performance at the operating loads Typical documentation for custom projects often includes bull Engineering or architectural drawings and ldquoequipment schedulerdquo sheets bull Component specification sheets that include part load efficiency or performance

factors bull Spreadsheet calculations or inputoutput files and results from system modeling or

other engineering analysis using accepted engineering algorithms and practices bull Log sheets trend logs from a building management system or other operating

documentation that are often necessary to document operating hours and equipment loading and used as a basis for the calculations (in some cases short term monitoring may be required to document the load profile)

bull Control sequence of operations that are necessary where controls play a part in the savings equation

Additional documentation other than that described in the application may be required for program participation Larger projects may also require pre- and post-project sub metering or monitoring of loads andor power input as part of another measurement and verification activity to demonstrate the actual energy savings that are realized

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 46

Baseline for Custom Analysis Where equipment is replaced prior to the end of its rated service life in order to achieve energy savings the existing equipment performance may be used as the baseline in the energy savings calculations Where equipment is replaced due to failure or for other reasons (such as obsolescence or a need for more capacity) the baseline performance used in the savings calculation should be either the minimum performance that would be required by code for that equipment type and application (where a code applies) or the performance of the equipment that would have been selected as the customers standard practice when a code does not apply

Baseline or Existing System Summary On custom worksheet on application form include make model number name plate information (such as operating voltage and rated full load amps) rated capacity quantities equipment condition and age facility operating hours equipment operating schedule and load curves If needed attach separate sheets

All decisions regarding incentives for custom projects are in the sole discretion of PECO

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 47

APPENDIX PROGRAM UPDATES SUMMARY (Q1 2017) Multifamily Nursing Home and Assisted Living retrofit customers need to apply for incentives through the PECO Smart Ideas Multi-Family Program administered by Franklin Energy For more information please contact Taylor Adler at tadlerfranklinenergycom or call 1-844-4BIZ-SAVE Multifamily Nursing Home and Assisted Living new construction customers can proceed with applying for incentives here

Revised Incentives

Data Centers

Measure Incentive Effective Immediately Previous Incentive

Air-cooled chiller for data centers $40ton $10ton Air-cooled chiller without condenser for data centers $20ton $10ton

Computer room air conditioner $30ton $7ton Water-cooled centrifugal chiller for data centers $30ton $5ton Water-cooled positive displacement or reciprocating chiller for data centers

$30ton $5ton

Uninterruptible power supply 20-100 kVA $10kVA $6kVA Uninterruptible power supply gt100 kVA $10kVA $1kVA Mainframe refresh $20kW installed $5kW installed Server refresh $20kW installed $4kW installed Server virtualization $400kW reduction $4kW reduction Thin clients $5units $4units

Lighting (Effective Immediately)

Measure Incentive Effective Immediately Specification Previous

Incentive Specification

New construction exterior LED outdoor flood light LED parking garage and canopy lighting LED polearm mounted parking and roadway lighting LED wall mount fixture

$005kWh (custom)

Lighting Power Density (LPD) Requirements Unchanged

$10-54 fixture

Lighting Power Density (LPD) (Wft2) by Space Type or Building Area

LED Replacement Lamps (Tubes) 2

$250lamp 5 Min Watts Reduced

$250lamp 6 Min Watts Reduced

LED Replacement Lamps (Tubes) 4

$400lamp 10 Min Watts Reduced

$400lamp 12 Min Watts Reduced

Permanent Fixture Removal $010Watt removed

Clarification of calculation to represent actual Wattage removed

$010Watt removed

Lighting (Effective 6117)

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 48

Measure Incentive Effective 6117 Specification Previous

Incentive Previous Specification

Interior LED high-bay fixtures andor retrofit kits if lt 20000 LED Lumens

$50fixture 150 Min Watts Reduced

$75fixture 150 Min Watts Reduced

Interior LED high-bay fixtures andor retrofit kits if gt 20000 LED Lumens

$75fixture 225 Min Watts Reduced

$75fixture 150 Min Watts Reduced

New Incentives

Compressed Air

Measure New Incentive Effective Immediately Variable speed air compressor $30compressor HP Compressed air system optimization $50compressor HP

HVAC

Measure New Incentive Effective Immediately ECM circulation pump $50pump Retro-commissioning cooling systems $750ton Retro-commissioning whole building $010square foot Energy management system $25ton Demand controlled ventilation $25ton Water-cooled air conditioner $22ton

Food Service

Measure New Incentive Effective Immediately Combination oven $200unit ENERGY STARreg commercial convection oven $150unit ENERGY STARreg commercial fryers $100unit ENERGY STARreg commercial hot holding cabinet $200unit

Refrigeration

Measure New Incentive Effective Immediately Air-cooled refrigeration condenser $10ton Oversized condenser with VFD $10ton Case light occupancy controls $750door

Lighting

Measure New Incentive Effective Immediately Interior central lighting controls $00175sq foot

Motors and Drives

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 49

-

Measure New Incentive Effective Immediately VFD for dust collection system motor $50HP

Application Clarifications and Revised Requirements

Clarification of LED Eligibility for New Construction or Retrofit Projects

LED Eligibility is determined by whether lighting products are listed in either the DesignLights Consortium (DLC) Qualified Products List of commercial-grade LED luminaires or the US Environmental Protection Agency database of ENERGY STAR certified products For products not yet listed contractors may submit LM79 and LM80 test reports PECO Smart Ideas engineers will review test reports to determine if the product in question meets performance specifications

Revised W 9 Requirement

W-9 forms EIN numbers are no longer required

Deletion of erroneous statement in New Construction Lighting

The following statement from previous Business Manual has been deleted ldquoThe minimum lighting power density used to calculate the incentive shall be no lower than 50 of the ASHRAE 901-2007 valuerdquo

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 50

  • Commercial amp Industrial Program Application Manual
    • Follow This Easy Process
      • Pre-Approval Application Checklist
      • Final Application Checklist
          • Terms and Conditions
            • Program Effective Dates
            • Program and Project Eligibility
            • Incentive Payment Limits
            • Application Review Process
            • Inspections andor PUCrsquos Statewide Program Evaluation
            • Requirements for Custom Project Electricity Savings Calculation
            • Tax Liability
            • No Endorsement
            • Warranties
            • Limitation of Liability
            • Assignment
            • Customerrsquos Certification
            • Termination
            • Acknowledgement
              • Retrofit Lighting Solutions
                • General Linear Fluorescent Lamp and Ballast Specification Requirements
                • LED Lamps and Fixtures
                • Minimum Watts Reduced
                • Linear LED (Tubes)
                • Permanent Fixture Removal
                  • LED Traffic Signals
                    • LED Traffic Signals Incentive Table
                      • New Construction Lighting Specifications
                        • New Construction Lighting Incentives Table
                          • New Construction Lighting Power Density Code
                              • Exterior New Construction Lighting
                              • HVAC Equipment
                                • Air-Source Air Conditioners and Air-Source Heat Pumps
                                • Package Terminal Systems (Replacements)
                                • Ductless Mini-Split Heat Pump lt54 Tons
                                • Geothermal Heat Pump
                                  • Other HVAC Equipment
                                    • Hotel Guest Room Occupancy Sensor
                                    • ECM Circulation Fan
                                    • ECM Circulation Pump
                                    • Retrocomissioning Cooling Systems
                                    • Retrocomissioning Whole Building
                                    • Energy Management System
                                    • Demand Controlled Ventilation
                                    • Other HVAC Incentives Table
                                      • Unitary HVAC Chillers
                                        • Air-Cooled Chillers Water Cooled Positive Displacement Reciprocating Chillers and Water Cooled Centrifugal Chillers
                                          • Refrigeration
                                            • Anti-Sweat Heater Controls
                                            • Evaporator Fan Controls
                                            • Floating Head Pressure Controls
                                            • Automatic Door Closers for Walk-In Coolers and Freezers
                                            • EC Motor for Walk-inReach-in Refrigerated cases or Freezer cases
                                            • ENERGY STAR Solid Door Freezer and Glass Door Freezer and Refrigerators
                                            • Refrigeration Suction Pipe Insulation
                                            • Night Cover
                                            • Strip Curtain on Walk-In CoolerFreezer
                                            • Evaporator Coil Defrost Control
                                            • Variable Speed Refrigeration Compressor
                                            • Add Doors to Open Refrigerated Cases
                                            • Door Gaskets
                                            • Zero Energy Doors
                                            • Air Cooled Refrigeration Condenser
                                            • Oversized Condenser with VFD
                                            • Case Light Occupancy Controls
                                            • LED Open Case Lighting
                                            • LED Enclosed Case Lighting Refrigerated
                                            • LED Enclosed Case Lighting Freezer
                                              • Food Service
                                                • Beverage and Snack Machine Controls
                                                • ENERGY STARreg Refrigerated Beverage Vending Machines
                                                • ENERGY STARreg Electric Steam Cooker
                                                • ENERGY STARreg Electric Combination Oven
                                                • ENERGY STARreg Commercial Convection Oven
                                                • ENERGY STARreg Commercial Fryers
                                                • ENERGY STARreg Commercial Hot Holding Cabinet
                                                  • Motors and Variable Frequency Drives
                                                    • Early Replacement Motors
                                                    • Variable Frequency Drives on HVAC Fan Applications
                                                    • Variable Frequency Drives on Pump Applications
                                                    • Variable Speed Control for Kitchen Exhaust Hoods
                                                    • Variable Speed Drives for Process or Other Equipment
                                                      • Domestic Hot Water
                                                        • Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater
                                                        • Heat Pump Water Heater
                                                        • Low Flow Pre-Rinse Spray Valve
                                                        • Domestic Hot Water Incentive Table
                                                          • Compressed Air Systems
                                                            • No-loss Condensate Drain
                                                            • Air-Entraining air nozzle
                                                            • Storage Tanks for LoadNo Load Screw Compressors
                                                            • Cycling Refrigerated Thermal Mass Dryer
                                                            • Variable Speed Air Compressor
                                                            • Compressed Air System Optimization
                                                            • Compressed Air Systems Incentive Table
                                                              • Data Centers
                                                                • Air Cooled Chiller
                                                                • Air Cooled Chiller without Condenser
                                                                • Computer Room Air Conditioner
                                                                • Computer Room Air Handler Variable Speed
                                                                  • Replacing constant speed CRAH with VSD CRAH
                                                                    • Water Cooled Centrifugal Chiller
                                                                    • Water Cooled Positive Displacement or Reciprocating Chiller
                                                                    • Uninterruptible Power Supply
                                                                    • Mainframe Refresh
                                                                    • Server Refresh
                                                                      • Whole Building Systems
                                                                        • Whole Building Systems Approach
                                                                        • How to Apply for Whole Building Systems Incentives
                                                                        • Customer Eligibility
                                                                        • Project Eligibility
                                                                        • Whole Building Systems Incentives Table
                                                                          • Custom Project Specifications
                                                                            • Instructions for Energy Savings Calculations for Custom Projects
                                                                            • Equipment Information Submittals
                                                                            • Energy Savings Calculations
                                                                            • Baseline for Custom Analysis
                                                                            • Baseline or Existing System Summary

Food Service amp Other Measures FoodOther

Measure Incentive Unit Incentive

Measure Code Unit

F01 Beverage Machine Controls Unit $25

F02 Snack Machine Controls Unit $20

F03 ENERGY STARreg Refrigerated Beverage Vending Machir Unit $125

F04 ENERGY STARreg Commerc ial Steam Cooker Unit $200

F05 ENERGY STARreg Electric Combination Oven Unit $200

F06 ENERGY STARreg Commercial Electric Convection Oven Unit $150

F07 ENERGY STARreg Commerc ial Fryers Unit $100

F08 ENERGY STARregCommerc ial Hot Holding Cabinet Unit $200

Food Service Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 37

Motors and Variable Frequency DrivesEarly Replacement Motors For constant speed and uniformly loaded motors this measure applies to the replacement of old motors with new energy efficient motors of the same rated horsepower Old motors must be less than 15 years Replacements where the old motor and new motor have different horsepower ratings are considered custom measures Motors with variable speeds variable loading or industrial-specific applications are also considered custom measures

Motors Incentive Table Motors

Measure Code

HP Incentive per Motor

M01 15 - 10 $40 M02 11 - 50 $100 M03 51-100 $150 M04 gt100 $300

Only VFDs on unitary systems are eligible Non-unitary systems must be submitted as a custom measure Soft start motors are not eligible

Variable Frequency Drives on HVAC Fan Applications Incentives are offered for installing VFDs on existing HVAC fans that do not have pre-existing VFDs This measure applies to HVAC supply and return fans only All other fans including cooling tower fans must be submitted as custom measures Manually fixed speed settings on HVAC fans must be submitted via custom application The VFD must control motor speed automatically in response to pressure flow temperature or other variable signal The installation of a VSD must accompany the permanent removal or disabling of any throttling devices such as inlet vanes bypass dampers and throttling valves etc The incentive is offered per controlled HP

Variable Frequency Drives on Pump Applications Incentives are offered for installing VFDs on existing chilled water pumps and heating hot water pumps that do not have existing VFDs This measure applies to chilled water pumps and heating hot water pumps only All other pumps must be submitted as custom measures Manually fixed speed settings on pumps must be submitted via custom application The VFD must control motor speed automatically in response to pressure flow temperature or other variable signal The installation of a VSD must accompany the permanent removal or disabling of any throttling devices such as throttling valves The incentive is offered per controlled HP

Variable Speed Control for Kitchen Exhaust Hoods The measure consists of installing a new VSD in conjunction with a sensor control system that varies the exhaust rate of kitchen ventilation (exhaust andor makeup air fans) based on the heat and effluent output from the cooking appliances (ie the more heat and smokevapors generated the more ventilation needed) This involves installing a temperature sensor in the hood exhaust collar andor an optic sensor on the end of the hood that senses cooking conditions and allows the system to automatically vary the rate of exhaust to match requirements by adjusting the fan speed accordingly

Variable Speed Drives for Process or Other Equipment VFD must be used in conjunction with a process (non HVAC) application To qualify for this incentive the driven equipment must operate at least 2000 hours per year Redundant or back- up units do not qualify VFDs replacing existing VFDs do not qualify The VFD must control motor

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 38

speed automatically in response to pressure flow temperature or other variable signal VFDs installed as ldquosoft startrdquo without automatic manual closed loop speed control do not qualify The installation of a VFD must accompany the permanent removal or disabling of any throttling devices such as throttling valves The incentive is per controlled HP and only applies to controlled motors less than 50 HP

VSDVFD Incentives Table VFD

Measure Code

Measure Unit Incentive per Unit

Fan Application

V01 VFD on HVAC Fan HP $25 Pump Application

Variable Speed Control for Kitchen Exhaust Hoods

Variable Speed Drives for Process or Other Equipment

V02 VFD on Chilled Water Pumps HP $25 V03 VFD on Heating Hot Water Pumps HP $25

V04 Kitchen Exhaust Fan Retrofit Hood HP $500

V05 Process Motor lt 50 HP HP $50

Domestic Hot Water Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater This measure documents the energy savings attributed to converting from a standard electric water heater to an ENERGY STAR natural gaspropane-fired water heater or a standard oil-fired water heater with an Energy Factor of 0585

Heat Pump Water Heater This includes heat pump water heaters with energy factors meeting ENERGY STAR criteria The measure described here involves a direct retrofit of a resistive electric water heater with a heat pump water heater It does not cover systems where the heat pump is a pre-heater or is combined with other water heating sources More complicated installations can be treated as custom projects

Low Flow Pre-Rinse Spray Valve This measure applies to efficient low flow pre-rinse sprayers in grocery and food service applications The most likely areas of application are kitchens in restaurants and hotels Only premises with electric water heating may qualify for this incentive In addition the replacement pre-rinse spray nozzle must use less than 16 gallons per minute with a cleanability performance of 26 seconds per plate or less Low flow pre-rinse sprayers reduce hot water usage and save energy associated with water heating

Domestic Hot Water Incentive Table

Measure Code Measure Unit Retrofit Incentive per

Unit

W01 Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater Unit $100

W02 Heat Pump Water Heater Unit $100 W03 Low-Flow Pre-Rinse Spray Valve Valve $17

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 39

Compressed Air SystemsNo-loss Condensate Drain No-loss Condensate Drains are controlled by a sensor that monitors the level of condensate and only open when there is a need to drain condensate They close before compressed air is allowed to escape This measure is targeted to non-residential customers whose equipment is a timed drain that operates on a pre-set schedule Acceptable baseline conditions are compressed air systems with standard condensate drains operated by a solenoid and timer

Air-Entraining air nozzle This measure is targeted to non-residential customers whose compressed air equipment uses stationary air nozzles in a production application with an open copper tube of 18rdquo or 14rdquo orifice diameter Energy efficient conditions require replacement of an inefficient non-air entraining air nozzle with an energy efficient air-entraining air nozzle that use less than 15 CFM at 100 psi for industrial applications

Storage Tanks for LoadNo Load Screw Compressors This measure protocol applies to the installation of air receivers with pressureflow controls to loadno load compressors Loadno load compressors unload when there is low demand The process of unloading is done over a period of time to avoid foaming of the lubrication oil Using a storage tank with pressureflow control will buffer the air demands on the compressor Reducing the number of cycles in turn reduces the number of transition times from load to no load and saves energy The baseline equipment is a loadno load compressor with a 1 galcfm storage ratio or a modulating compressor with blowdown The high efficiency equipment is a loadno load compressor with a minimum storage ratio of 4 gallons of storage per cfm

Cycling Refrigerated Thermal Mass Dryer When air is compressed water vapor in the air condenses and collects in liquid form Some of this condensate collects in the air distribution system and can contaminate downstream components such as air tools with rust oil and pipe debris Refrigerated air dryers remove the water vapor by cooling the air to its dew point and separating the condensate Changes in production and seasonal variations in ambient air temperature lead to partial loading conditions on the dryer Standard air dryers use a hot gas bypass system that is inefficient at partial loads A Cycling Thermal Mass Dryer uses a thermal storage medium to store cooling capacity when the system is operated at partial loads allowing the dryer refrigerant compressor to cycle

This measure is targeted to non-residential customers whose equipment is a non-cycling refrigerated air dryer with a capacity of 600 cfm or below Acceptable baseline conditions are a non-cycling (eg continuous) air dryer with a capacity of 600 cfm or below The replacement of desiccant deliquescent heat-of-compression membrane or other types of dryers does not qualify under this measure

Variable Speed Air Compressor This type of compressor uses a special drive to control the speed (RPM) of the unit which in turn saves energy compared to a fixed speed equivalent

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 40

No-loss Condensate Drain Air-Entraining Air Nozzle Cycling Refrigerated Thermal Mass Dryer

Compressor Incentive per

Equipment Type Units Quantity Daily Operating Unit

Hours

CA04 Storage Tanks for LoadNo Load Screw

Compressor HP $10 Compressors

CA05 Variable Speed Air Compressor

Compressor HP $30

CA06 Compressed Air System Optimization

Compressor HP $50

Compressed Air System Optimization The submitted optimization measures must be identified in an Air System Audit or equivalent study to be eligible The measures must demonstrate energy savings as evaluated by a Program Engineer Additionally measures must also fall under one or more of the category below to be eligible

1) Install storage Receivers (new receivers only replacing existing storage receivers are ineligible)

2) Compressor control (must demonstrate improvement in partial load efficiency of the compress air system including reduceeliminate partially loaded units)

3) Dryer control 4) Source pressure reduction 5) Right-sizing distribution components such as piping filters regulators

connectors and hoses (routine maintenance replacements are ineligible) 6) Leakage detection and repair 7) Eliminate low-efficiency end-usages of compressed air 8) Heat recovery (most reduce electricity consumption of the replaced heat source)

Compressed Air Systems Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 41

lt65000 Btuh

~ 65000 Btuh and lt135000 Btuh

135000 Btuhand lt240000 Btuh

240000 Btuh and lt760000 Btuh

760000 Btuh

154

142

135

125

123

Chiller Capacity Path APath B efficiency (kWton )

lt 150 tons

~150 tons and lt300 tons

300 tons and lt400 tons

400 tons and lt600 tons

600 tons

lt75 tons

~75 tons and lt150 tons

~150 tons and lt300 tons

~300 tons and lt600 tons

600 tons

0610 FU0695 FL and 0550 IPLV0440 IPLV

0610 FU0635 FL and 0550 IPLV0400 IPLV

0560 FU0595 FL and 0520 IPLV0390 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

Path APath B efficiency (kWton )

0750 FU0780 FL and 0600 IPLV0500 IPLV

0720 FU0750 FL and 0560 IPLV0490 IPLV

0660 FU0680 FL and 0540 IPLV0440 IPLV

0610 FU0625 FL and 0520 IPLV0410 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

Data Centers Data Center incentives are available for facilities ranging in size from office server closets to large standalone facilities

Air Cooled Chiller Path APath B EER (BtuWh) lt150 tons 101 FL97 FL and 137 IPLV158 IPLV ge150 tons 101 FL97 FL and 140 IPLV161 IPLV

Air Cooled Chiller without Condenser Air-cooled chillers without condenser must be rated with matching condensers and comply with air-cooled chiller efficiency requirements

Computer Room Air Conditioner

Computer Room Air Handler Variable Speed Replacing constant speed CRAH with VSD CRAH

Water Cooled Centrifugal Chiller

Water Cooled Positive Displacement or Reciprocating Chiller

Uninterruptible Power Supply Must be Energy Star Certified UPS or have full load efficiency rating

ge948 for 20-100 kVA ge978for ge100 kVA

Mainframe Refresh The rated efficiency of the replacement Mainframes power supply must be at least 8 more

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 42

- Equipment Type Units IncentiveUnit

D1 Air Cooled Chiller Ton $4000 D2 Air Cooled Chiller W ithout Condenser Ton $2000 D3 Computer Room Air Conditioner Ton $3000 D4 Computer Room Air Handler Variable Speed Ton $1000 D5 Water Cooled Centrifugal Chiller Ton $3000 D6 Water Cooled Positive Displacement or Reciprocatin $3000 D7 Uninterruptible Power Supply 20-100 kVA $1000 D8 Uninterruptible Power Supply gt 100 kVA $1000 D9 Mainframe Refresh $2000

D10 Server Refresh $2000 D11 PC Power Managment System $600 D12 HVAC System Optimization $005 D1 3 HoUCold Aisle Containment kWh saved $005 D14 Server Virtualization kW reduction $40000 D1 5 Thin Clients Units $500

efficient compared to the existing Mainframes power supply The replacement Mainframe if Inactive must be decommissioned and removed from the Data Center

Server Refresh Replacement servers must be ENERGY STARreg certified Replacement servers power supply must be 5 more efficiency compared to the power supply of the replaced servers The replaced server must be decommissioned and removed from the data center

HVAC System Optimization Final system must have these features

-Implementation of free cooling by the addition of an economizer system -Conversion of constant speed CRACCRAH into variable speed operations using VFDs and additional control functionalities and -Elevation of exhaust air temperature

HotCold Aisle Containment Includes both Hot and Cold Aisles Installing new containment measures not replacing already existed aisle containment Plenum-only installations not eligible Must result in higher difference between the return air (hot aisle) and supply air (cold aisle) temperatures measured at rack intake and exhaust locations

Server Virtualization Minimum of consolidating 5 Servers virtualized into one Server The virtualized servers if inactive are removed from the Data Center

Thin Clients Must be ENERGY STAR certified thin clients Decommissioned clients are removed from the Data Center

Data Center Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 43

Whole Building Systems Whole Building Systems Approach

The Whole Building Systems approach is intended to encourage integrated energy efficient designs by providing enhanced incentives to the customer who addresses overall energy performance Owners of eligible and qualifying new construction and major renovation projects can receive Whole Building Systems incentives when energy modeling indicates the projectrsquos performance is over 10 better than the ASHRAE 901-2007 Savings from eligible electric end-uses in kilowatt hours define the amount of financial incentive Energy savings achieved through renewable energy sources are not counted toward project energy savings and are not included in the savings basis Incentive reservations obtained during the design phase of a project will be honored for up to 24 months

How to Apply for Whole Building Systems Incentives Before construction begins bull A Pre-notification Application must be submitted documenting the Owners intention to

seek Whole Building Systems incentives bull The Owner must confirm the goals and energy efficiency strategies being pursued by the

design team on the completed Pre-notification Worksheet (Checklist tab) and in the project Summary (Whole Building Performance Summary tab)

bull Submit executable building modeling software files bull Submit the Whole Building Performance Summary worksheet energy simulation model

inputs and outputs and supporting documentation bull Receive confirmation and eligibility notification from the PECO Smart Ideas team and

receive an incentive reservation bull The final incentive paid may differ from the reserved incentive amount The final

incentive will be calculated based on site-verified equipment installation and performance The Owners final application and complete documentation must be received within 6 months of equipment installation or certificate of occupancy whichever is later

bull An executable energy model and model output demonstrating compliance with the criteria of ASHRAE 901-2007 Appendix G will be required and the equipment data sheets LED lighting fixtures must be on the DLC or Energy STAR qualified products list (QPL) to be eligible LED fixtures not on the DLC or Energy STAR QPL has the option of submitting LM79 and LM80 test reports for evaluation against DLC and Energy STAR eligibility criteria

During the construction period bull Owner and design team continue to work closely with their chosen contractor to assure

energy efficiency measures are included and installed in the completed building

When the building is constructed and operational bull Complete the Owner final application Request an equipment verification site visit by the

PECO Smart Ideas team Equipment must be installed and fully operational o Program staff will schedule a site visit and utilize submitted documentation and

measurement tools to verify that the installation follows the submitted energy simulation model

bull When PECO confirms that there are no significant changes to the installed equipment payment of the reserved incentive will be made to the Owner within 6 weeks

bull If changes from the proposed design energy simulation are found the Owner and design team will be notified of the reduced incentive amount a period of 20 calendar days will

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 44

Improvement Incentive per Sq Ft

over Code

~11 to lt20 $0155

~20 to lt30 $0233

~30 to lt40 $0350

~40 to lt60 $0525

~60 $0700

be allowed for supplemental information to be provided if no additional information is received by PECO Smart Ideas team the reduced incentive payments will be made and sent to the Owner if additional clarification and information is available program staff will work diligently to resolve the discrepancies and arrive at a reasonable incentive adjustment with the customer

Payments made by PECO Smart Ideas are final

Customer Eligibility The Owner of the proposed new building project must be a customer of PECO and receive delivery of electric service from PECO to receive kilowatt-hour based incentives Please note that electricity supply can be provided by any vendor

Project Eligibility bull The project must be a new construction or major renovation Major renovations involving

the removal and redesign of at least two building systems (such as interior lighting and mechanical systems) may apply for Whole Building Systems incentives

bull To qualify for incentives projects must demonstrate energy efficiency enhancements that achieve at least 11 improvement in the proposed design versus the standard baseline

bull The Owner must submit a Pre-approval Application to the program at the stage where changes for increased energy efficiency are still feasible and construction has not been completed

bull Projects receiving Whole Building Systems incentives are not eligible to receive other incentives such as the prescriptive or custom program incentives for the same scope

bull Project components that are NOT eligible for consideration as a basis for PECO Smart Ideas include the following o Alternative fuel sources (eg use of gas or oil equipment in lieu of electric) Please note

that combined heat and power (CHP) systems will be incentivized for the electricity they produce

o Renewable energy sources (eg solar wind biomass) bull Ineligible savings include exterior lighting process receptacle miscellaneous loads and

other unregulated end-uses Custom incentives are available for new construction exterior lighting

Whole Building Systems Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 45

Custom Project Specifications Instructions for Energy Savings Calculations for Custom Projects Custom projects must involve measures that result in a reduction in electric energy use (kWh) Electricity savings may result from either efficiency improvements or fuel switching Custom Incentives are based on the first year kilowatt-hour savings Custom applications must be accompanied by detailed engineering calculations that document the annual total energy savings

The following serve as guidelines for the minimum required documentation

Equipment Information Submittals bull A list of the present and proposed equipment and components to be installed

including manufacturerrsquos catalogmodel number bull Manufacturerrsquos specification sheets showing capacities and performance for all major

components

Energy Savings Calculations Provide calculations documenting the predicted energy consumption of the existing (or baseline) and proposed system using appropriate analytical tools and clearly stated assumptions Calculations may be performed by ldquohandrdquo but spreadsheet analysis or more rigorous modeling is preferred All analysis should be provided in electronic format All assumptions such as operating hours existing and proposed equipment operational details must be presented Engineering algorithms and procedures from recognized technical organizations such as ASHRAE SMACNA ANSI etc must be used Use rated performance factors tested under accepted procedures specified by recognized rating agencies such as AHRI ANSI ASTM etc Provide an explanation when equipment performance rating conditions vary from standard conditions

In support of the calculations extensive documentation must be provided that provides the basis for the savings estimates The documentation must provide information on the equipment operating schedule daily and seasonal load profile and baseline AND energy efficient equipment performance at the operating loads Typical documentation for custom projects often includes bull Engineering or architectural drawings and ldquoequipment schedulerdquo sheets bull Component specification sheets that include part load efficiency or performance

factors bull Spreadsheet calculations or inputoutput files and results from system modeling or

other engineering analysis using accepted engineering algorithms and practices bull Log sheets trend logs from a building management system or other operating

documentation that are often necessary to document operating hours and equipment loading and used as a basis for the calculations (in some cases short term monitoring may be required to document the load profile)

bull Control sequence of operations that are necessary where controls play a part in the savings equation

Additional documentation other than that described in the application may be required for program participation Larger projects may also require pre- and post-project sub metering or monitoring of loads andor power input as part of another measurement and verification activity to demonstrate the actual energy savings that are realized

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 46

Baseline for Custom Analysis Where equipment is replaced prior to the end of its rated service life in order to achieve energy savings the existing equipment performance may be used as the baseline in the energy savings calculations Where equipment is replaced due to failure or for other reasons (such as obsolescence or a need for more capacity) the baseline performance used in the savings calculation should be either the minimum performance that would be required by code for that equipment type and application (where a code applies) or the performance of the equipment that would have been selected as the customers standard practice when a code does not apply

Baseline or Existing System Summary On custom worksheet on application form include make model number name plate information (such as operating voltage and rated full load amps) rated capacity quantities equipment condition and age facility operating hours equipment operating schedule and load curves If needed attach separate sheets

All decisions regarding incentives for custom projects are in the sole discretion of PECO

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 47

APPENDIX PROGRAM UPDATES SUMMARY (Q1 2017) Multifamily Nursing Home and Assisted Living retrofit customers need to apply for incentives through the PECO Smart Ideas Multi-Family Program administered by Franklin Energy For more information please contact Taylor Adler at tadlerfranklinenergycom or call 1-844-4BIZ-SAVE Multifamily Nursing Home and Assisted Living new construction customers can proceed with applying for incentives here

Revised Incentives

Data Centers

Measure Incentive Effective Immediately Previous Incentive

Air-cooled chiller for data centers $40ton $10ton Air-cooled chiller without condenser for data centers $20ton $10ton

Computer room air conditioner $30ton $7ton Water-cooled centrifugal chiller for data centers $30ton $5ton Water-cooled positive displacement or reciprocating chiller for data centers

$30ton $5ton

Uninterruptible power supply 20-100 kVA $10kVA $6kVA Uninterruptible power supply gt100 kVA $10kVA $1kVA Mainframe refresh $20kW installed $5kW installed Server refresh $20kW installed $4kW installed Server virtualization $400kW reduction $4kW reduction Thin clients $5units $4units

Lighting (Effective Immediately)

Measure Incentive Effective Immediately Specification Previous

Incentive Specification

New construction exterior LED outdoor flood light LED parking garage and canopy lighting LED polearm mounted parking and roadway lighting LED wall mount fixture

$005kWh (custom)

Lighting Power Density (LPD) Requirements Unchanged

$10-54 fixture

Lighting Power Density (LPD) (Wft2) by Space Type or Building Area

LED Replacement Lamps (Tubes) 2

$250lamp 5 Min Watts Reduced

$250lamp 6 Min Watts Reduced

LED Replacement Lamps (Tubes) 4

$400lamp 10 Min Watts Reduced

$400lamp 12 Min Watts Reduced

Permanent Fixture Removal $010Watt removed

Clarification of calculation to represent actual Wattage removed

$010Watt removed

Lighting (Effective 6117)

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 48

Measure Incentive Effective 6117 Specification Previous

Incentive Previous Specification

Interior LED high-bay fixtures andor retrofit kits if lt 20000 LED Lumens

$50fixture 150 Min Watts Reduced

$75fixture 150 Min Watts Reduced

Interior LED high-bay fixtures andor retrofit kits if gt 20000 LED Lumens

$75fixture 225 Min Watts Reduced

$75fixture 150 Min Watts Reduced

New Incentives

Compressed Air

Measure New Incentive Effective Immediately Variable speed air compressor $30compressor HP Compressed air system optimization $50compressor HP

HVAC

Measure New Incentive Effective Immediately ECM circulation pump $50pump Retro-commissioning cooling systems $750ton Retro-commissioning whole building $010square foot Energy management system $25ton Demand controlled ventilation $25ton Water-cooled air conditioner $22ton

Food Service

Measure New Incentive Effective Immediately Combination oven $200unit ENERGY STARreg commercial convection oven $150unit ENERGY STARreg commercial fryers $100unit ENERGY STARreg commercial hot holding cabinet $200unit

Refrigeration

Measure New Incentive Effective Immediately Air-cooled refrigeration condenser $10ton Oversized condenser with VFD $10ton Case light occupancy controls $750door

Lighting

Measure New Incentive Effective Immediately Interior central lighting controls $00175sq foot

Motors and Drives

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 49

-

Measure New Incentive Effective Immediately VFD for dust collection system motor $50HP

Application Clarifications and Revised Requirements

Clarification of LED Eligibility for New Construction or Retrofit Projects

LED Eligibility is determined by whether lighting products are listed in either the DesignLights Consortium (DLC) Qualified Products List of commercial-grade LED luminaires or the US Environmental Protection Agency database of ENERGY STAR certified products For products not yet listed contractors may submit LM79 and LM80 test reports PECO Smart Ideas engineers will review test reports to determine if the product in question meets performance specifications

Revised W 9 Requirement

W-9 forms EIN numbers are no longer required

Deletion of erroneous statement in New Construction Lighting

The following statement from previous Business Manual has been deleted ldquoThe minimum lighting power density used to calculate the incentive shall be no lower than 50 of the ASHRAE 901-2007 valuerdquo

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 50

  • Commercial amp Industrial Program Application Manual
    • Follow This Easy Process
      • Pre-Approval Application Checklist
      • Final Application Checklist
          • Terms and Conditions
            • Program Effective Dates
            • Program and Project Eligibility
            • Incentive Payment Limits
            • Application Review Process
            • Inspections andor PUCrsquos Statewide Program Evaluation
            • Requirements for Custom Project Electricity Savings Calculation
            • Tax Liability
            • No Endorsement
            • Warranties
            • Limitation of Liability
            • Assignment
            • Customerrsquos Certification
            • Termination
            • Acknowledgement
              • Retrofit Lighting Solutions
                • General Linear Fluorescent Lamp and Ballast Specification Requirements
                • LED Lamps and Fixtures
                • Minimum Watts Reduced
                • Linear LED (Tubes)
                • Permanent Fixture Removal
                  • LED Traffic Signals
                    • LED Traffic Signals Incentive Table
                      • New Construction Lighting Specifications
                        • New Construction Lighting Incentives Table
                          • New Construction Lighting Power Density Code
                              • Exterior New Construction Lighting
                              • HVAC Equipment
                                • Air-Source Air Conditioners and Air-Source Heat Pumps
                                • Package Terminal Systems (Replacements)
                                • Ductless Mini-Split Heat Pump lt54 Tons
                                • Geothermal Heat Pump
                                  • Other HVAC Equipment
                                    • Hotel Guest Room Occupancy Sensor
                                    • ECM Circulation Fan
                                    • ECM Circulation Pump
                                    • Retrocomissioning Cooling Systems
                                    • Retrocomissioning Whole Building
                                    • Energy Management System
                                    • Demand Controlled Ventilation
                                    • Other HVAC Incentives Table
                                      • Unitary HVAC Chillers
                                        • Air-Cooled Chillers Water Cooled Positive Displacement Reciprocating Chillers and Water Cooled Centrifugal Chillers
                                          • Refrigeration
                                            • Anti-Sweat Heater Controls
                                            • Evaporator Fan Controls
                                            • Floating Head Pressure Controls
                                            • Automatic Door Closers for Walk-In Coolers and Freezers
                                            • EC Motor for Walk-inReach-in Refrigerated cases or Freezer cases
                                            • ENERGY STAR Solid Door Freezer and Glass Door Freezer and Refrigerators
                                            • Refrigeration Suction Pipe Insulation
                                            • Night Cover
                                            • Strip Curtain on Walk-In CoolerFreezer
                                            • Evaporator Coil Defrost Control
                                            • Variable Speed Refrigeration Compressor
                                            • Add Doors to Open Refrigerated Cases
                                            • Door Gaskets
                                            • Zero Energy Doors
                                            • Air Cooled Refrigeration Condenser
                                            • Oversized Condenser with VFD
                                            • Case Light Occupancy Controls
                                            • LED Open Case Lighting
                                            • LED Enclosed Case Lighting Refrigerated
                                            • LED Enclosed Case Lighting Freezer
                                              • Food Service
                                                • Beverage and Snack Machine Controls
                                                • ENERGY STARreg Refrigerated Beverage Vending Machines
                                                • ENERGY STARreg Electric Steam Cooker
                                                • ENERGY STARreg Electric Combination Oven
                                                • ENERGY STARreg Commercial Convection Oven
                                                • ENERGY STARreg Commercial Fryers
                                                • ENERGY STARreg Commercial Hot Holding Cabinet
                                                  • Motors and Variable Frequency Drives
                                                    • Early Replacement Motors
                                                    • Variable Frequency Drives on HVAC Fan Applications
                                                    • Variable Frequency Drives on Pump Applications
                                                    • Variable Speed Control for Kitchen Exhaust Hoods
                                                    • Variable Speed Drives for Process or Other Equipment
                                                      • Domestic Hot Water
                                                        • Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater
                                                        • Heat Pump Water Heater
                                                        • Low Flow Pre-Rinse Spray Valve
                                                        • Domestic Hot Water Incentive Table
                                                          • Compressed Air Systems
                                                            • No-loss Condensate Drain
                                                            • Air-Entraining air nozzle
                                                            • Storage Tanks for LoadNo Load Screw Compressors
                                                            • Cycling Refrigerated Thermal Mass Dryer
                                                            • Variable Speed Air Compressor
                                                            • Compressed Air System Optimization
                                                            • Compressed Air Systems Incentive Table
                                                              • Data Centers
                                                                • Air Cooled Chiller
                                                                • Air Cooled Chiller without Condenser
                                                                • Computer Room Air Conditioner
                                                                • Computer Room Air Handler Variable Speed
                                                                  • Replacing constant speed CRAH with VSD CRAH
                                                                    • Water Cooled Centrifugal Chiller
                                                                    • Water Cooled Positive Displacement or Reciprocating Chiller
                                                                    • Uninterruptible Power Supply
                                                                    • Mainframe Refresh
                                                                    • Server Refresh
                                                                      • Whole Building Systems
                                                                        • Whole Building Systems Approach
                                                                        • How to Apply for Whole Building Systems Incentives
                                                                        • Customer Eligibility
                                                                        • Project Eligibility
                                                                        • Whole Building Systems Incentives Table
                                                                          • Custom Project Specifications
                                                                            • Instructions for Energy Savings Calculations for Custom Projects
                                                                            • Equipment Information Submittals
                                                                            • Energy Savings Calculations
                                                                            • Baseline for Custom Analysis
                                                                            • Baseline or Existing System Summary

Motors and Variable Frequency DrivesEarly Replacement Motors For constant speed and uniformly loaded motors this measure applies to the replacement of old motors with new energy efficient motors of the same rated horsepower Old motors must be less than 15 years Replacements where the old motor and new motor have different horsepower ratings are considered custom measures Motors with variable speeds variable loading or industrial-specific applications are also considered custom measures

Motors Incentive Table Motors

Measure Code

HP Incentive per Motor

M01 15 - 10 $40 M02 11 - 50 $100 M03 51-100 $150 M04 gt100 $300

Only VFDs on unitary systems are eligible Non-unitary systems must be submitted as a custom measure Soft start motors are not eligible

Variable Frequency Drives on HVAC Fan Applications Incentives are offered for installing VFDs on existing HVAC fans that do not have pre-existing VFDs This measure applies to HVAC supply and return fans only All other fans including cooling tower fans must be submitted as custom measures Manually fixed speed settings on HVAC fans must be submitted via custom application The VFD must control motor speed automatically in response to pressure flow temperature or other variable signal The installation of a VSD must accompany the permanent removal or disabling of any throttling devices such as inlet vanes bypass dampers and throttling valves etc The incentive is offered per controlled HP

Variable Frequency Drives on Pump Applications Incentives are offered for installing VFDs on existing chilled water pumps and heating hot water pumps that do not have existing VFDs This measure applies to chilled water pumps and heating hot water pumps only All other pumps must be submitted as custom measures Manually fixed speed settings on pumps must be submitted via custom application The VFD must control motor speed automatically in response to pressure flow temperature or other variable signal The installation of a VSD must accompany the permanent removal or disabling of any throttling devices such as throttling valves The incentive is offered per controlled HP

Variable Speed Control for Kitchen Exhaust Hoods The measure consists of installing a new VSD in conjunction with a sensor control system that varies the exhaust rate of kitchen ventilation (exhaust andor makeup air fans) based on the heat and effluent output from the cooking appliances (ie the more heat and smokevapors generated the more ventilation needed) This involves installing a temperature sensor in the hood exhaust collar andor an optic sensor on the end of the hood that senses cooking conditions and allows the system to automatically vary the rate of exhaust to match requirements by adjusting the fan speed accordingly

Variable Speed Drives for Process or Other Equipment VFD must be used in conjunction with a process (non HVAC) application To qualify for this incentive the driven equipment must operate at least 2000 hours per year Redundant or back- up units do not qualify VFDs replacing existing VFDs do not qualify The VFD must control motor

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 38

speed automatically in response to pressure flow temperature or other variable signal VFDs installed as ldquosoft startrdquo without automatic manual closed loop speed control do not qualify The installation of a VFD must accompany the permanent removal or disabling of any throttling devices such as throttling valves The incentive is per controlled HP and only applies to controlled motors less than 50 HP

VSDVFD Incentives Table VFD

Measure Code

Measure Unit Incentive per Unit

Fan Application

V01 VFD on HVAC Fan HP $25 Pump Application

Variable Speed Control for Kitchen Exhaust Hoods

Variable Speed Drives for Process or Other Equipment

V02 VFD on Chilled Water Pumps HP $25 V03 VFD on Heating Hot Water Pumps HP $25

V04 Kitchen Exhaust Fan Retrofit Hood HP $500

V05 Process Motor lt 50 HP HP $50

Domestic Hot Water Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater This measure documents the energy savings attributed to converting from a standard electric water heater to an ENERGY STAR natural gaspropane-fired water heater or a standard oil-fired water heater with an Energy Factor of 0585

Heat Pump Water Heater This includes heat pump water heaters with energy factors meeting ENERGY STAR criteria The measure described here involves a direct retrofit of a resistive electric water heater with a heat pump water heater It does not cover systems where the heat pump is a pre-heater or is combined with other water heating sources More complicated installations can be treated as custom projects

Low Flow Pre-Rinse Spray Valve This measure applies to efficient low flow pre-rinse sprayers in grocery and food service applications The most likely areas of application are kitchens in restaurants and hotels Only premises with electric water heating may qualify for this incentive In addition the replacement pre-rinse spray nozzle must use less than 16 gallons per minute with a cleanability performance of 26 seconds per plate or less Low flow pre-rinse sprayers reduce hot water usage and save energy associated with water heating

Domestic Hot Water Incentive Table

Measure Code Measure Unit Retrofit Incentive per

Unit

W01 Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater Unit $100

W02 Heat Pump Water Heater Unit $100 W03 Low-Flow Pre-Rinse Spray Valve Valve $17

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 39

Compressed Air SystemsNo-loss Condensate Drain No-loss Condensate Drains are controlled by a sensor that monitors the level of condensate and only open when there is a need to drain condensate They close before compressed air is allowed to escape This measure is targeted to non-residential customers whose equipment is a timed drain that operates on a pre-set schedule Acceptable baseline conditions are compressed air systems with standard condensate drains operated by a solenoid and timer

Air-Entraining air nozzle This measure is targeted to non-residential customers whose compressed air equipment uses stationary air nozzles in a production application with an open copper tube of 18rdquo or 14rdquo orifice diameter Energy efficient conditions require replacement of an inefficient non-air entraining air nozzle with an energy efficient air-entraining air nozzle that use less than 15 CFM at 100 psi for industrial applications

Storage Tanks for LoadNo Load Screw Compressors This measure protocol applies to the installation of air receivers with pressureflow controls to loadno load compressors Loadno load compressors unload when there is low demand The process of unloading is done over a period of time to avoid foaming of the lubrication oil Using a storage tank with pressureflow control will buffer the air demands on the compressor Reducing the number of cycles in turn reduces the number of transition times from load to no load and saves energy The baseline equipment is a loadno load compressor with a 1 galcfm storage ratio or a modulating compressor with blowdown The high efficiency equipment is a loadno load compressor with a minimum storage ratio of 4 gallons of storage per cfm

Cycling Refrigerated Thermal Mass Dryer When air is compressed water vapor in the air condenses and collects in liquid form Some of this condensate collects in the air distribution system and can contaminate downstream components such as air tools with rust oil and pipe debris Refrigerated air dryers remove the water vapor by cooling the air to its dew point and separating the condensate Changes in production and seasonal variations in ambient air temperature lead to partial loading conditions on the dryer Standard air dryers use a hot gas bypass system that is inefficient at partial loads A Cycling Thermal Mass Dryer uses a thermal storage medium to store cooling capacity when the system is operated at partial loads allowing the dryer refrigerant compressor to cycle

This measure is targeted to non-residential customers whose equipment is a non-cycling refrigerated air dryer with a capacity of 600 cfm or below Acceptable baseline conditions are a non-cycling (eg continuous) air dryer with a capacity of 600 cfm or below The replacement of desiccant deliquescent heat-of-compression membrane or other types of dryers does not qualify under this measure

Variable Speed Air Compressor This type of compressor uses a special drive to control the speed (RPM) of the unit which in turn saves energy compared to a fixed speed equivalent

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 40

No-loss Condensate Drain Air-Entraining Air Nozzle Cycling Refrigerated Thermal Mass Dryer

Compressor Incentive per

Equipment Type Units Quantity Daily Operating Unit

Hours

CA04 Storage Tanks for LoadNo Load Screw

Compressor HP $10 Compressors

CA05 Variable Speed Air Compressor

Compressor HP $30

CA06 Compressed Air System Optimization

Compressor HP $50

Compressed Air System Optimization The submitted optimization measures must be identified in an Air System Audit or equivalent study to be eligible The measures must demonstrate energy savings as evaluated by a Program Engineer Additionally measures must also fall under one or more of the category below to be eligible

1) Install storage Receivers (new receivers only replacing existing storage receivers are ineligible)

2) Compressor control (must demonstrate improvement in partial load efficiency of the compress air system including reduceeliminate partially loaded units)

3) Dryer control 4) Source pressure reduction 5) Right-sizing distribution components such as piping filters regulators

connectors and hoses (routine maintenance replacements are ineligible) 6) Leakage detection and repair 7) Eliminate low-efficiency end-usages of compressed air 8) Heat recovery (most reduce electricity consumption of the replaced heat source)

Compressed Air Systems Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 41

lt65000 Btuh

~ 65000 Btuh and lt135000 Btuh

135000 Btuhand lt240000 Btuh

240000 Btuh and lt760000 Btuh

760000 Btuh

154

142

135

125

123

Chiller Capacity Path APath B efficiency (kWton )

lt 150 tons

~150 tons and lt300 tons

300 tons and lt400 tons

400 tons and lt600 tons

600 tons

lt75 tons

~75 tons and lt150 tons

~150 tons and lt300 tons

~300 tons and lt600 tons

600 tons

0610 FU0695 FL and 0550 IPLV0440 IPLV

0610 FU0635 FL and 0550 IPLV0400 IPLV

0560 FU0595 FL and 0520 IPLV0390 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

Path APath B efficiency (kWton )

0750 FU0780 FL and 0600 IPLV0500 IPLV

0720 FU0750 FL and 0560 IPLV0490 IPLV

0660 FU0680 FL and 0540 IPLV0440 IPLV

0610 FU0625 FL and 0520 IPLV0410 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

Data Centers Data Center incentives are available for facilities ranging in size from office server closets to large standalone facilities

Air Cooled Chiller Path APath B EER (BtuWh) lt150 tons 101 FL97 FL and 137 IPLV158 IPLV ge150 tons 101 FL97 FL and 140 IPLV161 IPLV

Air Cooled Chiller without Condenser Air-cooled chillers without condenser must be rated with matching condensers and comply with air-cooled chiller efficiency requirements

Computer Room Air Conditioner

Computer Room Air Handler Variable Speed Replacing constant speed CRAH with VSD CRAH

Water Cooled Centrifugal Chiller

Water Cooled Positive Displacement or Reciprocating Chiller

Uninterruptible Power Supply Must be Energy Star Certified UPS or have full load efficiency rating

ge948 for 20-100 kVA ge978for ge100 kVA

Mainframe Refresh The rated efficiency of the replacement Mainframes power supply must be at least 8 more

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 42

- Equipment Type Units IncentiveUnit

D1 Air Cooled Chiller Ton $4000 D2 Air Cooled Chiller W ithout Condenser Ton $2000 D3 Computer Room Air Conditioner Ton $3000 D4 Computer Room Air Handler Variable Speed Ton $1000 D5 Water Cooled Centrifugal Chiller Ton $3000 D6 Water Cooled Positive Displacement or Reciprocatin $3000 D7 Uninterruptible Power Supply 20-100 kVA $1000 D8 Uninterruptible Power Supply gt 100 kVA $1000 D9 Mainframe Refresh $2000

D10 Server Refresh $2000 D11 PC Power Managment System $600 D12 HVAC System Optimization $005 D1 3 HoUCold Aisle Containment kWh saved $005 D14 Server Virtualization kW reduction $40000 D1 5 Thin Clients Units $500

efficient compared to the existing Mainframes power supply The replacement Mainframe if Inactive must be decommissioned and removed from the Data Center

Server Refresh Replacement servers must be ENERGY STARreg certified Replacement servers power supply must be 5 more efficiency compared to the power supply of the replaced servers The replaced server must be decommissioned and removed from the data center

HVAC System Optimization Final system must have these features

-Implementation of free cooling by the addition of an economizer system -Conversion of constant speed CRACCRAH into variable speed operations using VFDs and additional control functionalities and -Elevation of exhaust air temperature

HotCold Aisle Containment Includes both Hot and Cold Aisles Installing new containment measures not replacing already existed aisle containment Plenum-only installations not eligible Must result in higher difference between the return air (hot aisle) and supply air (cold aisle) temperatures measured at rack intake and exhaust locations

Server Virtualization Minimum of consolidating 5 Servers virtualized into one Server The virtualized servers if inactive are removed from the Data Center

Thin Clients Must be ENERGY STAR certified thin clients Decommissioned clients are removed from the Data Center

Data Center Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 43

Whole Building Systems Whole Building Systems Approach

The Whole Building Systems approach is intended to encourage integrated energy efficient designs by providing enhanced incentives to the customer who addresses overall energy performance Owners of eligible and qualifying new construction and major renovation projects can receive Whole Building Systems incentives when energy modeling indicates the projectrsquos performance is over 10 better than the ASHRAE 901-2007 Savings from eligible electric end-uses in kilowatt hours define the amount of financial incentive Energy savings achieved through renewable energy sources are not counted toward project energy savings and are not included in the savings basis Incentive reservations obtained during the design phase of a project will be honored for up to 24 months

How to Apply for Whole Building Systems Incentives Before construction begins bull A Pre-notification Application must be submitted documenting the Owners intention to

seek Whole Building Systems incentives bull The Owner must confirm the goals and energy efficiency strategies being pursued by the

design team on the completed Pre-notification Worksheet (Checklist tab) and in the project Summary (Whole Building Performance Summary tab)

bull Submit executable building modeling software files bull Submit the Whole Building Performance Summary worksheet energy simulation model

inputs and outputs and supporting documentation bull Receive confirmation and eligibility notification from the PECO Smart Ideas team and

receive an incentive reservation bull The final incentive paid may differ from the reserved incentive amount The final

incentive will be calculated based on site-verified equipment installation and performance The Owners final application and complete documentation must be received within 6 months of equipment installation or certificate of occupancy whichever is later

bull An executable energy model and model output demonstrating compliance with the criteria of ASHRAE 901-2007 Appendix G will be required and the equipment data sheets LED lighting fixtures must be on the DLC or Energy STAR qualified products list (QPL) to be eligible LED fixtures not on the DLC or Energy STAR QPL has the option of submitting LM79 and LM80 test reports for evaluation against DLC and Energy STAR eligibility criteria

During the construction period bull Owner and design team continue to work closely with their chosen contractor to assure

energy efficiency measures are included and installed in the completed building

When the building is constructed and operational bull Complete the Owner final application Request an equipment verification site visit by the

PECO Smart Ideas team Equipment must be installed and fully operational o Program staff will schedule a site visit and utilize submitted documentation and

measurement tools to verify that the installation follows the submitted energy simulation model

bull When PECO confirms that there are no significant changes to the installed equipment payment of the reserved incentive will be made to the Owner within 6 weeks

bull If changes from the proposed design energy simulation are found the Owner and design team will be notified of the reduced incentive amount a period of 20 calendar days will

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 44

Improvement Incentive per Sq Ft

over Code

~11 to lt20 $0155

~20 to lt30 $0233

~30 to lt40 $0350

~40 to lt60 $0525

~60 $0700

be allowed for supplemental information to be provided if no additional information is received by PECO Smart Ideas team the reduced incentive payments will be made and sent to the Owner if additional clarification and information is available program staff will work diligently to resolve the discrepancies and arrive at a reasonable incentive adjustment with the customer

Payments made by PECO Smart Ideas are final

Customer Eligibility The Owner of the proposed new building project must be a customer of PECO and receive delivery of electric service from PECO to receive kilowatt-hour based incentives Please note that electricity supply can be provided by any vendor

Project Eligibility bull The project must be a new construction or major renovation Major renovations involving

the removal and redesign of at least two building systems (such as interior lighting and mechanical systems) may apply for Whole Building Systems incentives

bull To qualify for incentives projects must demonstrate energy efficiency enhancements that achieve at least 11 improvement in the proposed design versus the standard baseline

bull The Owner must submit a Pre-approval Application to the program at the stage where changes for increased energy efficiency are still feasible and construction has not been completed

bull Projects receiving Whole Building Systems incentives are not eligible to receive other incentives such as the prescriptive or custom program incentives for the same scope

bull Project components that are NOT eligible for consideration as a basis for PECO Smart Ideas include the following o Alternative fuel sources (eg use of gas or oil equipment in lieu of electric) Please note

that combined heat and power (CHP) systems will be incentivized for the electricity they produce

o Renewable energy sources (eg solar wind biomass) bull Ineligible savings include exterior lighting process receptacle miscellaneous loads and

other unregulated end-uses Custom incentives are available for new construction exterior lighting

Whole Building Systems Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 45

Custom Project Specifications Instructions for Energy Savings Calculations for Custom Projects Custom projects must involve measures that result in a reduction in electric energy use (kWh) Electricity savings may result from either efficiency improvements or fuel switching Custom Incentives are based on the first year kilowatt-hour savings Custom applications must be accompanied by detailed engineering calculations that document the annual total energy savings

The following serve as guidelines for the minimum required documentation

Equipment Information Submittals bull A list of the present and proposed equipment and components to be installed

including manufacturerrsquos catalogmodel number bull Manufacturerrsquos specification sheets showing capacities and performance for all major

components

Energy Savings Calculations Provide calculations documenting the predicted energy consumption of the existing (or baseline) and proposed system using appropriate analytical tools and clearly stated assumptions Calculations may be performed by ldquohandrdquo but spreadsheet analysis or more rigorous modeling is preferred All analysis should be provided in electronic format All assumptions such as operating hours existing and proposed equipment operational details must be presented Engineering algorithms and procedures from recognized technical organizations such as ASHRAE SMACNA ANSI etc must be used Use rated performance factors tested under accepted procedures specified by recognized rating agencies such as AHRI ANSI ASTM etc Provide an explanation when equipment performance rating conditions vary from standard conditions

In support of the calculations extensive documentation must be provided that provides the basis for the savings estimates The documentation must provide information on the equipment operating schedule daily and seasonal load profile and baseline AND energy efficient equipment performance at the operating loads Typical documentation for custom projects often includes bull Engineering or architectural drawings and ldquoequipment schedulerdquo sheets bull Component specification sheets that include part load efficiency or performance

factors bull Spreadsheet calculations or inputoutput files and results from system modeling or

other engineering analysis using accepted engineering algorithms and practices bull Log sheets trend logs from a building management system or other operating

documentation that are often necessary to document operating hours and equipment loading and used as a basis for the calculations (in some cases short term monitoring may be required to document the load profile)

bull Control sequence of operations that are necessary where controls play a part in the savings equation

Additional documentation other than that described in the application may be required for program participation Larger projects may also require pre- and post-project sub metering or monitoring of loads andor power input as part of another measurement and verification activity to demonstrate the actual energy savings that are realized

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 46

Baseline for Custom Analysis Where equipment is replaced prior to the end of its rated service life in order to achieve energy savings the existing equipment performance may be used as the baseline in the energy savings calculations Where equipment is replaced due to failure or for other reasons (such as obsolescence or a need for more capacity) the baseline performance used in the savings calculation should be either the minimum performance that would be required by code for that equipment type and application (where a code applies) or the performance of the equipment that would have been selected as the customers standard practice when a code does not apply

Baseline or Existing System Summary On custom worksheet on application form include make model number name plate information (such as operating voltage and rated full load amps) rated capacity quantities equipment condition and age facility operating hours equipment operating schedule and load curves If needed attach separate sheets

All decisions regarding incentives for custom projects are in the sole discretion of PECO

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 47

APPENDIX PROGRAM UPDATES SUMMARY (Q1 2017) Multifamily Nursing Home and Assisted Living retrofit customers need to apply for incentives through the PECO Smart Ideas Multi-Family Program administered by Franklin Energy For more information please contact Taylor Adler at tadlerfranklinenergycom or call 1-844-4BIZ-SAVE Multifamily Nursing Home and Assisted Living new construction customers can proceed with applying for incentives here

Revised Incentives

Data Centers

Measure Incentive Effective Immediately Previous Incentive

Air-cooled chiller for data centers $40ton $10ton Air-cooled chiller without condenser for data centers $20ton $10ton

Computer room air conditioner $30ton $7ton Water-cooled centrifugal chiller for data centers $30ton $5ton Water-cooled positive displacement or reciprocating chiller for data centers

$30ton $5ton

Uninterruptible power supply 20-100 kVA $10kVA $6kVA Uninterruptible power supply gt100 kVA $10kVA $1kVA Mainframe refresh $20kW installed $5kW installed Server refresh $20kW installed $4kW installed Server virtualization $400kW reduction $4kW reduction Thin clients $5units $4units

Lighting (Effective Immediately)

Measure Incentive Effective Immediately Specification Previous

Incentive Specification

New construction exterior LED outdoor flood light LED parking garage and canopy lighting LED polearm mounted parking and roadway lighting LED wall mount fixture

$005kWh (custom)

Lighting Power Density (LPD) Requirements Unchanged

$10-54 fixture

Lighting Power Density (LPD) (Wft2) by Space Type or Building Area

LED Replacement Lamps (Tubes) 2

$250lamp 5 Min Watts Reduced

$250lamp 6 Min Watts Reduced

LED Replacement Lamps (Tubes) 4

$400lamp 10 Min Watts Reduced

$400lamp 12 Min Watts Reduced

Permanent Fixture Removal $010Watt removed

Clarification of calculation to represent actual Wattage removed

$010Watt removed

Lighting (Effective 6117)

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 48

Measure Incentive Effective 6117 Specification Previous

Incentive Previous Specification

Interior LED high-bay fixtures andor retrofit kits if lt 20000 LED Lumens

$50fixture 150 Min Watts Reduced

$75fixture 150 Min Watts Reduced

Interior LED high-bay fixtures andor retrofit kits if gt 20000 LED Lumens

$75fixture 225 Min Watts Reduced

$75fixture 150 Min Watts Reduced

New Incentives

Compressed Air

Measure New Incentive Effective Immediately Variable speed air compressor $30compressor HP Compressed air system optimization $50compressor HP

HVAC

Measure New Incentive Effective Immediately ECM circulation pump $50pump Retro-commissioning cooling systems $750ton Retro-commissioning whole building $010square foot Energy management system $25ton Demand controlled ventilation $25ton Water-cooled air conditioner $22ton

Food Service

Measure New Incentive Effective Immediately Combination oven $200unit ENERGY STARreg commercial convection oven $150unit ENERGY STARreg commercial fryers $100unit ENERGY STARreg commercial hot holding cabinet $200unit

Refrigeration

Measure New Incentive Effective Immediately Air-cooled refrigeration condenser $10ton Oversized condenser with VFD $10ton Case light occupancy controls $750door

Lighting

Measure New Incentive Effective Immediately Interior central lighting controls $00175sq foot

Motors and Drives

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 49

-

Measure New Incentive Effective Immediately VFD for dust collection system motor $50HP

Application Clarifications and Revised Requirements

Clarification of LED Eligibility for New Construction or Retrofit Projects

LED Eligibility is determined by whether lighting products are listed in either the DesignLights Consortium (DLC) Qualified Products List of commercial-grade LED luminaires or the US Environmental Protection Agency database of ENERGY STAR certified products For products not yet listed contractors may submit LM79 and LM80 test reports PECO Smart Ideas engineers will review test reports to determine if the product in question meets performance specifications

Revised W 9 Requirement

W-9 forms EIN numbers are no longer required

Deletion of erroneous statement in New Construction Lighting

The following statement from previous Business Manual has been deleted ldquoThe minimum lighting power density used to calculate the incentive shall be no lower than 50 of the ASHRAE 901-2007 valuerdquo

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 50

  • Commercial amp Industrial Program Application Manual
    • Follow This Easy Process
      • Pre-Approval Application Checklist
      • Final Application Checklist
          • Terms and Conditions
            • Program Effective Dates
            • Program and Project Eligibility
            • Incentive Payment Limits
            • Application Review Process
            • Inspections andor PUCrsquos Statewide Program Evaluation
            • Requirements for Custom Project Electricity Savings Calculation
            • Tax Liability
            • No Endorsement
            • Warranties
            • Limitation of Liability
            • Assignment
            • Customerrsquos Certification
            • Termination
            • Acknowledgement
              • Retrofit Lighting Solutions
                • General Linear Fluorescent Lamp and Ballast Specification Requirements
                • LED Lamps and Fixtures
                • Minimum Watts Reduced
                • Linear LED (Tubes)
                • Permanent Fixture Removal
                  • LED Traffic Signals
                    • LED Traffic Signals Incentive Table
                      • New Construction Lighting Specifications
                        • New Construction Lighting Incentives Table
                          • New Construction Lighting Power Density Code
                              • Exterior New Construction Lighting
                              • HVAC Equipment
                                • Air-Source Air Conditioners and Air-Source Heat Pumps
                                • Package Terminal Systems (Replacements)
                                • Ductless Mini-Split Heat Pump lt54 Tons
                                • Geothermal Heat Pump
                                  • Other HVAC Equipment
                                    • Hotel Guest Room Occupancy Sensor
                                    • ECM Circulation Fan
                                    • ECM Circulation Pump
                                    • Retrocomissioning Cooling Systems
                                    • Retrocomissioning Whole Building
                                    • Energy Management System
                                    • Demand Controlled Ventilation
                                    • Other HVAC Incentives Table
                                      • Unitary HVAC Chillers
                                        • Air-Cooled Chillers Water Cooled Positive Displacement Reciprocating Chillers and Water Cooled Centrifugal Chillers
                                          • Refrigeration
                                            • Anti-Sweat Heater Controls
                                            • Evaporator Fan Controls
                                            • Floating Head Pressure Controls
                                            • Automatic Door Closers for Walk-In Coolers and Freezers
                                            • EC Motor for Walk-inReach-in Refrigerated cases or Freezer cases
                                            • ENERGY STAR Solid Door Freezer and Glass Door Freezer and Refrigerators
                                            • Refrigeration Suction Pipe Insulation
                                            • Night Cover
                                            • Strip Curtain on Walk-In CoolerFreezer
                                            • Evaporator Coil Defrost Control
                                            • Variable Speed Refrigeration Compressor
                                            • Add Doors to Open Refrigerated Cases
                                            • Door Gaskets
                                            • Zero Energy Doors
                                            • Air Cooled Refrigeration Condenser
                                            • Oversized Condenser with VFD
                                            • Case Light Occupancy Controls
                                            • LED Open Case Lighting
                                            • LED Enclosed Case Lighting Refrigerated
                                            • LED Enclosed Case Lighting Freezer
                                              • Food Service
                                                • Beverage and Snack Machine Controls
                                                • ENERGY STARreg Refrigerated Beverage Vending Machines
                                                • ENERGY STARreg Electric Steam Cooker
                                                • ENERGY STARreg Electric Combination Oven
                                                • ENERGY STARreg Commercial Convection Oven
                                                • ENERGY STARreg Commercial Fryers
                                                • ENERGY STARreg Commercial Hot Holding Cabinet
                                                  • Motors and Variable Frequency Drives
                                                    • Early Replacement Motors
                                                    • Variable Frequency Drives on HVAC Fan Applications
                                                    • Variable Frequency Drives on Pump Applications
                                                    • Variable Speed Control for Kitchen Exhaust Hoods
                                                    • Variable Speed Drives for Process or Other Equipment
                                                      • Domestic Hot Water
                                                        • Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater
                                                        • Heat Pump Water Heater
                                                        • Low Flow Pre-Rinse Spray Valve
                                                        • Domestic Hot Water Incentive Table
                                                          • Compressed Air Systems
                                                            • No-loss Condensate Drain
                                                            • Air-Entraining air nozzle
                                                            • Storage Tanks for LoadNo Load Screw Compressors
                                                            • Cycling Refrigerated Thermal Mass Dryer
                                                            • Variable Speed Air Compressor
                                                            • Compressed Air System Optimization
                                                            • Compressed Air Systems Incentive Table
                                                              • Data Centers
                                                                • Air Cooled Chiller
                                                                • Air Cooled Chiller without Condenser
                                                                • Computer Room Air Conditioner
                                                                • Computer Room Air Handler Variable Speed
                                                                  • Replacing constant speed CRAH with VSD CRAH
                                                                    • Water Cooled Centrifugal Chiller
                                                                    • Water Cooled Positive Displacement or Reciprocating Chiller
                                                                    • Uninterruptible Power Supply
                                                                    • Mainframe Refresh
                                                                    • Server Refresh
                                                                      • Whole Building Systems
                                                                        • Whole Building Systems Approach
                                                                        • How to Apply for Whole Building Systems Incentives
                                                                        • Customer Eligibility
                                                                        • Project Eligibility
                                                                        • Whole Building Systems Incentives Table
                                                                          • Custom Project Specifications
                                                                            • Instructions for Energy Savings Calculations for Custom Projects
                                                                            • Equipment Information Submittals
                                                                            • Energy Savings Calculations
                                                                            • Baseline for Custom Analysis
                                                                            • Baseline or Existing System Summary

speed automatically in response to pressure flow temperature or other variable signal VFDs installed as ldquosoft startrdquo without automatic manual closed loop speed control do not qualify The installation of a VFD must accompany the permanent removal or disabling of any throttling devices such as throttling valves The incentive is per controlled HP and only applies to controlled motors less than 50 HP

VSDVFD Incentives Table VFD

Measure Code

Measure Unit Incentive per Unit

Fan Application

V01 VFD on HVAC Fan HP $25 Pump Application

Variable Speed Control for Kitchen Exhaust Hoods

Variable Speed Drives for Process or Other Equipment

V02 VFD on Chilled Water Pumps HP $25 V03 VFD on Heating Hot Water Pumps HP $25

V04 Kitchen Exhaust Fan Retrofit Hood HP $500

V05 Process Motor lt 50 HP HP $50

Domestic Hot Water Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater This measure documents the energy savings attributed to converting from a standard electric water heater to an ENERGY STAR natural gaspropane-fired water heater or a standard oil-fired water heater with an Energy Factor of 0585

Heat Pump Water Heater This includes heat pump water heaters with energy factors meeting ENERGY STAR criteria The measure described here involves a direct retrofit of a resistive electric water heater with a heat pump water heater It does not cover systems where the heat pump is a pre-heater or is combined with other water heating sources More complicated installations can be treated as custom projects

Low Flow Pre-Rinse Spray Valve This measure applies to efficient low flow pre-rinse sprayers in grocery and food service applications The most likely areas of application are kitchens in restaurants and hotels Only premises with electric water heating may qualify for this incentive In addition the replacement pre-rinse spray nozzle must use less than 16 gallons per minute with a cleanability performance of 26 seconds per plate or less Low flow pre-rinse sprayers reduce hot water usage and save energy associated with water heating

Domestic Hot Water Incentive Table

Measure Code Measure Unit Retrofit Incentive per

Unit

W01 Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater Unit $100

W02 Heat Pump Water Heater Unit $100 W03 Low-Flow Pre-Rinse Spray Valve Valve $17

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 39

Compressed Air SystemsNo-loss Condensate Drain No-loss Condensate Drains are controlled by a sensor that monitors the level of condensate and only open when there is a need to drain condensate They close before compressed air is allowed to escape This measure is targeted to non-residential customers whose equipment is a timed drain that operates on a pre-set schedule Acceptable baseline conditions are compressed air systems with standard condensate drains operated by a solenoid and timer

Air-Entraining air nozzle This measure is targeted to non-residential customers whose compressed air equipment uses stationary air nozzles in a production application with an open copper tube of 18rdquo or 14rdquo orifice diameter Energy efficient conditions require replacement of an inefficient non-air entraining air nozzle with an energy efficient air-entraining air nozzle that use less than 15 CFM at 100 psi for industrial applications

Storage Tanks for LoadNo Load Screw Compressors This measure protocol applies to the installation of air receivers with pressureflow controls to loadno load compressors Loadno load compressors unload when there is low demand The process of unloading is done over a period of time to avoid foaming of the lubrication oil Using a storage tank with pressureflow control will buffer the air demands on the compressor Reducing the number of cycles in turn reduces the number of transition times from load to no load and saves energy The baseline equipment is a loadno load compressor with a 1 galcfm storage ratio or a modulating compressor with blowdown The high efficiency equipment is a loadno load compressor with a minimum storage ratio of 4 gallons of storage per cfm

Cycling Refrigerated Thermal Mass Dryer When air is compressed water vapor in the air condenses and collects in liquid form Some of this condensate collects in the air distribution system and can contaminate downstream components such as air tools with rust oil and pipe debris Refrigerated air dryers remove the water vapor by cooling the air to its dew point and separating the condensate Changes in production and seasonal variations in ambient air temperature lead to partial loading conditions on the dryer Standard air dryers use a hot gas bypass system that is inefficient at partial loads A Cycling Thermal Mass Dryer uses a thermal storage medium to store cooling capacity when the system is operated at partial loads allowing the dryer refrigerant compressor to cycle

This measure is targeted to non-residential customers whose equipment is a non-cycling refrigerated air dryer with a capacity of 600 cfm or below Acceptable baseline conditions are a non-cycling (eg continuous) air dryer with a capacity of 600 cfm or below The replacement of desiccant deliquescent heat-of-compression membrane or other types of dryers does not qualify under this measure

Variable Speed Air Compressor This type of compressor uses a special drive to control the speed (RPM) of the unit which in turn saves energy compared to a fixed speed equivalent

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 40

No-loss Condensate Drain Air-Entraining Air Nozzle Cycling Refrigerated Thermal Mass Dryer

Compressor Incentive per

Equipment Type Units Quantity Daily Operating Unit

Hours

CA04 Storage Tanks for LoadNo Load Screw

Compressor HP $10 Compressors

CA05 Variable Speed Air Compressor

Compressor HP $30

CA06 Compressed Air System Optimization

Compressor HP $50

Compressed Air System Optimization The submitted optimization measures must be identified in an Air System Audit or equivalent study to be eligible The measures must demonstrate energy savings as evaluated by a Program Engineer Additionally measures must also fall under one or more of the category below to be eligible

1) Install storage Receivers (new receivers only replacing existing storage receivers are ineligible)

2) Compressor control (must demonstrate improvement in partial load efficiency of the compress air system including reduceeliminate partially loaded units)

3) Dryer control 4) Source pressure reduction 5) Right-sizing distribution components such as piping filters regulators

connectors and hoses (routine maintenance replacements are ineligible) 6) Leakage detection and repair 7) Eliminate low-efficiency end-usages of compressed air 8) Heat recovery (most reduce electricity consumption of the replaced heat source)

Compressed Air Systems Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 41

lt65000 Btuh

~ 65000 Btuh and lt135000 Btuh

135000 Btuhand lt240000 Btuh

240000 Btuh and lt760000 Btuh

760000 Btuh

154

142

135

125

123

Chiller Capacity Path APath B efficiency (kWton )

lt 150 tons

~150 tons and lt300 tons

300 tons and lt400 tons

400 tons and lt600 tons

600 tons

lt75 tons

~75 tons and lt150 tons

~150 tons and lt300 tons

~300 tons and lt600 tons

600 tons

0610 FU0695 FL and 0550 IPLV0440 IPLV

0610 FU0635 FL and 0550 IPLV0400 IPLV

0560 FU0595 FL and 0520 IPLV0390 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

Path APath B efficiency (kWton )

0750 FU0780 FL and 0600 IPLV0500 IPLV

0720 FU0750 FL and 0560 IPLV0490 IPLV

0660 FU0680 FL and 0540 IPLV0440 IPLV

0610 FU0625 FL and 0520 IPLV0410 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

Data Centers Data Center incentives are available for facilities ranging in size from office server closets to large standalone facilities

Air Cooled Chiller Path APath B EER (BtuWh) lt150 tons 101 FL97 FL and 137 IPLV158 IPLV ge150 tons 101 FL97 FL and 140 IPLV161 IPLV

Air Cooled Chiller without Condenser Air-cooled chillers without condenser must be rated with matching condensers and comply with air-cooled chiller efficiency requirements

Computer Room Air Conditioner

Computer Room Air Handler Variable Speed Replacing constant speed CRAH with VSD CRAH

Water Cooled Centrifugal Chiller

Water Cooled Positive Displacement or Reciprocating Chiller

Uninterruptible Power Supply Must be Energy Star Certified UPS or have full load efficiency rating

ge948 for 20-100 kVA ge978for ge100 kVA

Mainframe Refresh The rated efficiency of the replacement Mainframes power supply must be at least 8 more

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 42

- Equipment Type Units IncentiveUnit

D1 Air Cooled Chiller Ton $4000 D2 Air Cooled Chiller W ithout Condenser Ton $2000 D3 Computer Room Air Conditioner Ton $3000 D4 Computer Room Air Handler Variable Speed Ton $1000 D5 Water Cooled Centrifugal Chiller Ton $3000 D6 Water Cooled Positive Displacement or Reciprocatin $3000 D7 Uninterruptible Power Supply 20-100 kVA $1000 D8 Uninterruptible Power Supply gt 100 kVA $1000 D9 Mainframe Refresh $2000

D10 Server Refresh $2000 D11 PC Power Managment System $600 D12 HVAC System Optimization $005 D1 3 HoUCold Aisle Containment kWh saved $005 D14 Server Virtualization kW reduction $40000 D1 5 Thin Clients Units $500

efficient compared to the existing Mainframes power supply The replacement Mainframe if Inactive must be decommissioned and removed from the Data Center

Server Refresh Replacement servers must be ENERGY STARreg certified Replacement servers power supply must be 5 more efficiency compared to the power supply of the replaced servers The replaced server must be decommissioned and removed from the data center

HVAC System Optimization Final system must have these features

-Implementation of free cooling by the addition of an economizer system -Conversion of constant speed CRACCRAH into variable speed operations using VFDs and additional control functionalities and -Elevation of exhaust air temperature

HotCold Aisle Containment Includes both Hot and Cold Aisles Installing new containment measures not replacing already existed aisle containment Plenum-only installations not eligible Must result in higher difference between the return air (hot aisle) and supply air (cold aisle) temperatures measured at rack intake and exhaust locations

Server Virtualization Minimum of consolidating 5 Servers virtualized into one Server The virtualized servers if inactive are removed from the Data Center

Thin Clients Must be ENERGY STAR certified thin clients Decommissioned clients are removed from the Data Center

Data Center Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 43

Whole Building Systems Whole Building Systems Approach

The Whole Building Systems approach is intended to encourage integrated energy efficient designs by providing enhanced incentives to the customer who addresses overall energy performance Owners of eligible and qualifying new construction and major renovation projects can receive Whole Building Systems incentives when energy modeling indicates the projectrsquos performance is over 10 better than the ASHRAE 901-2007 Savings from eligible electric end-uses in kilowatt hours define the amount of financial incentive Energy savings achieved through renewable energy sources are not counted toward project energy savings and are not included in the savings basis Incentive reservations obtained during the design phase of a project will be honored for up to 24 months

How to Apply for Whole Building Systems Incentives Before construction begins bull A Pre-notification Application must be submitted documenting the Owners intention to

seek Whole Building Systems incentives bull The Owner must confirm the goals and energy efficiency strategies being pursued by the

design team on the completed Pre-notification Worksheet (Checklist tab) and in the project Summary (Whole Building Performance Summary tab)

bull Submit executable building modeling software files bull Submit the Whole Building Performance Summary worksheet energy simulation model

inputs and outputs and supporting documentation bull Receive confirmation and eligibility notification from the PECO Smart Ideas team and

receive an incentive reservation bull The final incentive paid may differ from the reserved incentive amount The final

incentive will be calculated based on site-verified equipment installation and performance The Owners final application and complete documentation must be received within 6 months of equipment installation or certificate of occupancy whichever is later

bull An executable energy model and model output demonstrating compliance with the criteria of ASHRAE 901-2007 Appendix G will be required and the equipment data sheets LED lighting fixtures must be on the DLC or Energy STAR qualified products list (QPL) to be eligible LED fixtures not on the DLC or Energy STAR QPL has the option of submitting LM79 and LM80 test reports for evaluation against DLC and Energy STAR eligibility criteria

During the construction period bull Owner and design team continue to work closely with their chosen contractor to assure

energy efficiency measures are included and installed in the completed building

When the building is constructed and operational bull Complete the Owner final application Request an equipment verification site visit by the

PECO Smart Ideas team Equipment must be installed and fully operational o Program staff will schedule a site visit and utilize submitted documentation and

measurement tools to verify that the installation follows the submitted energy simulation model

bull When PECO confirms that there are no significant changes to the installed equipment payment of the reserved incentive will be made to the Owner within 6 weeks

bull If changes from the proposed design energy simulation are found the Owner and design team will be notified of the reduced incentive amount a period of 20 calendar days will

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 44

Improvement Incentive per Sq Ft

over Code

~11 to lt20 $0155

~20 to lt30 $0233

~30 to lt40 $0350

~40 to lt60 $0525

~60 $0700

be allowed for supplemental information to be provided if no additional information is received by PECO Smart Ideas team the reduced incentive payments will be made and sent to the Owner if additional clarification and information is available program staff will work diligently to resolve the discrepancies and arrive at a reasonable incentive adjustment with the customer

Payments made by PECO Smart Ideas are final

Customer Eligibility The Owner of the proposed new building project must be a customer of PECO and receive delivery of electric service from PECO to receive kilowatt-hour based incentives Please note that electricity supply can be provided by any vendor

Project Eligibility bull The project must be a new construction or major renovation Major renovations involving

the removal and redesign of at least two building systems (such as interior lighting and mechanical systems) may apply for Whole Building Systems incentives

bull To qualify for incentives projects must demonstrate energy efficiency enhancements that achieve at least 11 improvement in the proposed design versus the standard baseline

bull The Owner must submit a Pre-approval Application to the program at the stage where changes for increased energy efficiency are still feasible and construction has not been completed

bull Projects receiving Whole Building Systems incentives are not eligible to receive other incentives such as the prescriptive or custom program incentives for the same scope

bull Project components that are NOT eligible for consideration as a basis for PECO Smart Ideas include the following o Alternative fuel sources (eg use of gas or oil equipment in lieu of electric) Please note

that combined heat and power (CHP) systems will be incentivized for the electricity they produce

o Renewable energy sources (eg solar wind biomass) bull Ineligible savings include exterior lighting process receptacle miscellaneous loads and

other unregulated end-uses Custom incentives are available for new construction exterior lighting

Whole Building Systems Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 45

Custom Project Specifications Instructions for Energy Savings Calculations for Custom Projects Custom projects must involve measures that result in a reduction in electric energy use (kWh) Electricity savings may result from either efficiency improvements or fuel switching Custom Incentives are based on the first year kilowatt-hour savings Custom applications must be accompanied by detailed engineering calculations that document the annual total energy savings

The following serve as guidelines for the minimum required documentation

Equipment Information Submittals bull A list of the present and proposed equipment and components to be installed

including manufacturerrsquos catalogmodel number bull Manufacturerrsquos specification sheets showing capacities and performance for all major

components

Energy Savings Calculations Provide calculations documenting the predicted energy consumption of the existing (or baseline) and proposed system using appropriate analytical tools and clearly stated assumptions Calculations may be performed by ldquohandrdquo but spreadsheet analysis or more rigorous modeling is preferred All analysis should be provided in electronic format All assumptions such as operating hours existing and proposed equipment operational details must be presented Engineering algorithms and procedures from recognized technical organizations such as ASHRAE SMACNA ANSI etc must be used Use rated performance factors tested under accepted procedures specified by recognized rating agencies such as AHRI ANSI ASTM etc Provide an explanation when equipment performance rating conditions vary from standard conditions

In support of the calculations extensive documentation must be provided that provides the basis for the savings estimates The documentation must provide information on the equipment operating schedule daily and seasonal load profile and baseline AND energy efficient equipment performance at the operating loads Typical documentation for custom projects often includes bull Engineering or architectural drawings and ldquoequipment schedulerdquo sheets bull Component specification sheets that include part load efficiency or performance

factors bull Spreadsheet calculations or inputoutput files and results from system modeling or

other engineering analysis using accepted engineering algorithms and practices bull Log sheets trend logs from a building management system or other operating

documentation that are often necessary to document operating hours and equipment loading and used as a basis for the calculations (in some cases short term monitoring may be required to document the load profile)

bull Control sequence of operations that are necessary where controls play a part in the savings equation

Additional documentation other than that described in the application may be required for program participation Larger projects may also require pre- and post-project sub metering or monitoring of loads andor power input as part of another measurement and verification activity to demonstrate the actual energy savings that are realized

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 46

Baseline for Custom Analysis Where equipment is replaced prior to the end of its rated service life in order to achieve energy savings the existing equipment performance may be used as the baseline in the energy savings calculations Where equipment is replaced due to failure or for other reasons (such as obsolescence or a need for more capacity) the baseline performance used in the savings calculation should be either the minimum performance that would be required by code for that equipment type and application (where a code applies) or the performance of the equipment that would have been selected as the customers standard practice when a code does not apply

Baseline or Existing System Summary On custom worksheet on application form include make model number name plate information (such as operating voltage and rated full load amps) rated capacity quantities equipment condition and age facility operating hours equipment operating schedule and load curves If needed attach separate sheets

All decisions regarding incentives for custom projects are in the sole discretion of PECO

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 47

APPENDIX PROGRAM UPDATES SUMMARY (Q1 2017) Multifamily Nursing Home and Assisted Living retrofit customers need to apply for incentives through the PECO Smart Ideas Multi-Family Program administered by Franklin Energy For more information please contact Taylor Adler at tadlerfranklinenergycom or call 1-844-4BIZ-SAVE Multifamily Nursing Home and Assisted Living new construction customers can proceed with applying for incentives here

Revised Incentives

Data Centers

Measure Incentive Effective Immediately Previous Incentive

Air-cooled chiller for data centers $40ton $10ton Air-cooled chiller without condenser for data centers $20ton $10ton

Computer room air conditioner $30ton $7ton Water-cooled centrifugal chiller for data centers $30ton $5ton Water-cooled positive displacement or reciprocating chiller for data centers

$30ton $5ton

Uninterruptible power supply 20-100 kVA $10kVA $6kVA Uninterruptible power supply gt100 kVA $10kVA $1kVA Mainframe refresh $20kW installed $5kW installed Server refresh $20kW installed $4kW installed Server virtualization $400kW reduction $4kW reduction Thin clients $5units $4units

Lighting (Effective Immediately)

Measure Incentive Effective Immediately Specification Previous

Incentive Specification

New construction exterior LED outdoor flood light LED parking garage and canopy lighting LED polearm mounted parking and roadway lighting LED wall mount fixture

$005kWh (custom)

Lighting Power Density (LPD) Requirements Unchanged

$10-54 fixture

Lighting Power Density (LPD) (Wft2) by Space Type or Building Area

LED Replacement Lamps (Tubes) 2

$250lamp 5 Min Watts Reduced

$250lamp 6 Min Watts Reduced

LED Replacement Lamps (Tubes) 4

$400lamp 10 Min Watts Reduced

$400lamp 12 Min Watts Reduced

Permanent Fixture Removal $010Watt removed

Clarification of calculation to represent actual Wattage removed

$010Watt removed

Lighting (Effective 6117)

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 48

Measure Incentive Effective 6117 Specification Previous

Incentive Previous Specification

Interior LED high-bay fixtures andor retrofit kits if lt 20000 LED Lumens

$50fixture 150 Min Watts Reduced

$75fixture 150 Min Watts Reduced

Interior LED high-bay fixtures andor retrofit kits if gt 20000 LED Lumens

$75fixture 225 Min Watts Reduced

$75fixture 150 Min Watts Reduced

New Incentives

Compressed Air

Measure New Incentive Effective Immediately Variable speed air compressor $30compressor HP Compressed air system optimization $50compressor HP

HVAC

Measure New Incentive Effective Immediately ECM circulation pump $50pump Retro-commissioning cooling systems $750ton Retro-commissioning whole building $010square foot Energy management system $25ton Demand controlled ventilation $25ton Water-cooled air conditioner $22ton

Food Service

Measure New Incentive Effective Immediately Combination oven $200unit ENERGY STARreg commercial convection oven $150unit ENERGY STARreg commercial fryers $100unit ENERGY STARreg commercial hot holding cabinet $200unit

Refrigeration

Measure New Incentive Effective Immediately Air-cooled refrigeration condenser $10ton Oversized condenser with VFD $10ton Case light occupancy controls $750door

Lighting

Measure New Incentive Effective Immediately Interior central lighting controls $00175sq foot

Motors and Drives

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 49

-

Measure New Incentive Effective Immediately VFD for dust collection system motor $50HP

Application Clarifications and Revised Requirements

Clarification of LED Eligibility for New Construction or Retrofit Projects

LED Eligibility is determined by whether lighting products are listed in either the DesignLights Consortium (DLC) Qualified Products List of commercial-grade LED luminaires or the US Environmental Protection Agency database of ENERGY STAR certified products For products not yet listed contractors may submit LM79 and LM80 test reports PECO Smart Ideas engineers will review test reports to determine if the product in question meets performance specifications

Revised W 9 Requirement

W-9 forms EIN numbers are no longer required

Deletion of erroneous statement in New Construction Lighting

The following statement from previous Business Manual has been deleted ldquoThe minimum lighting power density used to calculate the incentive shall be no lower than 50 of the ASHRAE 901-2007 valuerdquo

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 50

  • Commercial amp Industrial Program Application Manual
    • Follow This Easy Process
      • Pre-Approval Application Checklist
      • Final Application Checklist
          • Terms and Conditions
            • Program Effective Dates
            • Program and Project Eligibility
            • Incentive Payment Limits
            • Application Review Process
            • Inspections andor PUCrsquos Statewide Program Evaluation
            • Requirements for Custom Project Electricity Savings Calculation
            • Tax Liability
            • No Endorsement
            • Warranties
            • Limitation of Liability
            • Assignment
            • Customerrsquos Certification
            • Termination
            • Acknowledgement
              • Retrofit Lighting Solutions
                • General Linear Fluorescent Lamp and Ballast Specification Requirements
                • LED Lamps and Fixtures
                • Minimum Watts Reduced
                • Linear LED (Tubes)
                • Permanent Fixture Removal
                  • LED Traffic Signals
                    • LED Traffic Signals Incentive Table
                      • New Construction Lighting Specifications
                        • New Construction Lighting Incentives Table
                          • New Construction Lighting Power Density Code
                              • Exterior New Construction Lighting
                              • HVAC Equipment
                                • Air-Source Air Conditioners and Air-Source Heat Pumps
                                • Package Terminal Systems (Replacements)
                                • Ductless Mini-Split Heat Pump lt54 Tons
                                • Geothermal Heat Pump
                                  • Other HVAC Equipment
                                    • Hotel Guest Room Occupancy Sensor
                                    • ECM Circulation Fan
                                    • ECM Circulation Pump
                                    • Retrocomissioning Cooling Systems
                                    • Retrocomissioning Whole Building
                                    • Energy Management System
                                    • Demand Controlled Ventilation
                                    • Other HVAC Incentives Table
                                      • Unitary HVAC Chillers
                                        • Air-Cooled Chillers Water Cooled Positive Displacement Reciprocating Chillers and Water Cooled Centrifugal Chillers
                                          • Refrigeration
                                            • Anti-Sweat Heater Controls
                                            • Evaporator Fan Controls
                                            • Floating Head Pressure Controls
                                            • Automatic Door Closers for Walk-In Coolers and Freezers
                                            • EC Motor for Walk-inReach-in Refrigerated cases or Freezer cases
                                            • ENERGY STAR Solid Door Freezer and Glass Door Freezer and Refrigerators
                                            • Refrigeration Suction Pipe Insulation
                                            • Night Cover
                                            • Strip Curtain on Walk-In CoolerFreezer
                                            • Evaporator Coil Defrost Control
                                            • Variable Speed Refrigeration Compressor
                                            • Add Doors to Open Refrigerated Cases
                                            • Door Gaskets
                                            • Zero Energy Doors
                                            • Air Cooled Refrigeration Condenser
                                            • Oversized Condenser with VFD
                                            • Case Light Occupancy Controls
                                            • LED Open Case Lighting
                                            • LED Enclosed Case Lighting Refrigerated
                                            • LED Enclosed Case Lighting Freezer
                                              • Food Service
                                                • Beverage and Snack Machine Controls
                                                • ENERGY STARreg Refrigerated Beverage Vending Machines
                                                • ENERGY STARreg Electric Steam Cooker
                                                • ENERGY STARreg Electric Combination Oven
                                                • ENERGY STARreg Commercial Convection Oven
                                                • ENERGY STARreg Commercial Fryers
                                                • ENERGY STARreg Commercial Hot Holding Cabinet
                                                  • Motors and Variable Frequency Drives
                                                    • Early Replacement Motors
                                                    • Variable Frequency Drives on HVAC Fan Applications
                                                    • Variable Frequency Drives on Pump Applications
                                                    • Variable Speed Control for Kitchen Exhaust Hoods
                                                    • Variable Speed Drives for Process or Other Equipment
                                                      • Domestic Hot Water
                                                        • Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater
                                                        • Heat Pump Water Heater
                                                        • Low Flow Pre-Rinse Spray Valve
                                                        • Domestic Hot Water Incentive Table
                                                          • Compressed Air Systems
                                                            • No-loss Condensate Drain
                                                            • Air-Entraining air nozzle
                                                            • Storage Tanks for LoadNo Load Screw Compressors
                                                            • Cycling Refrigerated Thermal Mass Dryer
                                                            • Variable Speed Air Compressor
                                                            • Compressed Air System Optimization
                                                            • Compressed Air Systems Incentive Table
                                                              • Data Centers
                                                                • Air Cooled Chiller
                                                                • Air Cooled Chiller without Condenser
                                                                • Computer Room Air Conditioner
                                                                • Computer Room Air Handler Variable Speed
                                                                  • Replacing constant speed CRAH with VSD CRAH
                                                                    • Water Cooled Centrifugal Chiller
                                                                    • Water Cooled Positive Displacement or Reciprocating Chiller
                                                                    • Uninterruptible Power Supply
                                                                    • Mainframe Refresh
                                                                    • Server Refresh
                                                                      • Whole Building Systems
                                                                        • Whole Building Systems Approach
                                                                        • How to Apply for Whole Building Systems Incentives
                                                                        • Customer Eligibility
                                                                        • Project Eligibility
                                                                        • Whole Building Systems Incentives Table
                                                                          • Custom Project Specifications
                                                                            • Instructions for Energy Savings Calculations for Custom Projects
                                                                            • Equipment Information Submittals
                                                                            • Energy Savings Calculations
                                                                            • Baseline for Custom Analysis
                                                                            • Baseline or Existing System Summary

Compressed Air SystemsNo-loss Condensate Drain No-loss Condensate Drains are controlled by a sensor that monitors the level of condensate and only open when there is a need to drain condensate They close before compressed air is allowed to escape This measure is targeted to non-residential customers whose equipment is a timed drain that operates on a pre-set schedule Acceptable baseline conditions are compressed air systems with standard condensate drains operated by a solenoid and timer

Air-Entraining air nozzle This measure is targeted to non-residential customers whose compressed air equipment uses stationary air nozzles in a production application with an open copper tube of 18rdquo or 14rdquo orifice diameter Energy efficient conditions require replacement of an inefficient non-air entraining air nozzle with an energy efficient air-entraining air nozzle that use less than 15 CFM at 100 psi for industrial applications

Storage Tanks for LoadNo Load Screw Compressors This measure protocol applies to the installation of air receivers with pressureflow controls to loadno load compressors Loadno load compressors unload when there is low demand The process of unloading is done over a period of time to avoid foaming of the lubrication oil Using a storage tank with pressureflow control will buffer the air demands on the compressor Reducing the number of cycles in turn reduces the number of transition times from load to no load and saves energy The baseline equipment is a loadno load compressor with a 1 galcfm storage ratio or a modulating compressor with blowdown The high efficiency equipment is a loadno load compressor with a minimum storage ratio of 4 gallons of storage per cfm

Cycling Refrigerated Thermal Mass Dryer When air is compressed water vapor in the air condenses and collects in liquid form Some of this condensate collects in the air distribution system and can contaminate downstream components such as air tools with rust oil and pipe debris Refrigerated air dryers remove the water vapor by cooling the air to its dew point and separating the condensate Changes in production and seasonal variations in ambient air temperature lead to partial loading conditions on the dryer Standard air dryers use a hot gas bypass system that is inefficient at partial loads A Cycling Thermal Mass Dryer uses a thermal storage medium to store cooling capacity when the system is operated at partial loads allowing the dryer refrigerant compressor to cycle

This measure is targeted to non-residential customers whose equipment is a non-cycling refrigerated air dryer with a capacity of 600 cfm or below Acceptable baseline conditions are a non-cycling (eg continuous) air dryer with a capacity of 600 cfm or below The replacement of desiccant deliquescent heat-of-compression membrane or other types of dryers does not qualify under this measure

Variable Speed Air Compressor This type of compressor uses a special drive to control the speed (RPM) of the unit which in turn saves energy compared to a fixed speed equivalent

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 40

No-loss Condensate Drain Air-Entraining Air Nozzle Cycling Refrigerated Thermal Mass Dryer

Compressor Incentive per

Equipment Type Units Quantity Daily Operating Unit

Hours

CA04 Storage Tanks for LoadNo Load Screw

Compressor HP $10 Compressors

CA05 Variable Speed Air Compressor

Compressor HP $30

CA06 Compressed Air System Optimization

Compressor HP $50

Compressed Air System Optimization The submitted optimization measures must be identified in an Air System Audit or equivalent study to be eligible The measures must demonstrate energy savings as evaluated by a Program Engineer Additionally measures must also fall under one or more of the category below to be eligible

1) Install storage Receivers (new receivers only replacing existing storage receivers are ineligible)

2) Compressor control (must demonstrate improvement in partial load efficiency of the compress air system including reduceeliminate partially loaded units)

3) Dryer control 4) Source pressure reduction 5) Right-sizing distribution components such as piping filters regulators

connectors and hoses (routine maintenance replacements are ineligible) 6) Leakage detection and repair 7) Eliminate low-efficiency end-usages of compressed air 8) Heat recovery (most reduce electricity consumption of the replaced heat source)

Compressed Air Systems Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 41

lt65000 Btuh

~ 65000 Btuh and lt135000 Btuh

135000 Btuhand lt240000 Btuh

240000 Btuh and lt760000 Btuh

760000 Btuh

154

142

135

125

123

Chiller Capacity Path APath B efficiency (kWton )

lt 150 tons

~150 tons and lt300 tons

300 tons and lt400 tons

400 tons and lt600 tons

600 tons

lt75 tons

~75 tons and lt150 tons

~150 tons and lt300 tons

~300 tons and lt600 tons

600 tons

0610 FU0695 FL and 0550 IPLV0440 IPLV

0610 FU0635 FL and 0550 IPLV0400 IPLV

0560 FU0595 FL and 0520 IPLV0390 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

Path APath B efficiency (kWton )

0750 FU0780 FL and 0600 IPLV0500 IPLV

0720 FU0750 FL and 0560 IPLV0490 IPLV

0660 FU0680 FL and 0540 IPLV0440 IPLV

0610 FU0625 FL and 0520 IPLV0410 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

Data Centers Data Center incentives are available for facilities ranging in size from office server closets to large standalone facilities

Air Cooled Chiller Path APath B EER (BtuWh) lt150 tons 101 FL97 FL and 137 IPLV158 IPLV ge150 tons 101 FL97 FL and 140 IPLV161 IPLV

Air Cooled Chiller without Condenser Air-cooled chillers without condenser must be rated with matching condensers and comply with air-cooled chiller efficiency requirements

Computer Room Air Conditioner

Computer Room Air Handler Variable Speed Replacing constant speed CRAH with VSD CRAH

Water Cooled Centrifugal Chiller

Water Cooled Positive Displacement or Reciprocating Chiller

Uninterruptible Power Supply Must be Energy Star Certified UPS or have full load efficiency rating

ge948 for 20-100 kVA ge978for ge100 kVA

Mainframe Refresh The rated efficiency of the replacement Mainframes power supply must be at least 8 more

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 42

- Equipment Type Units IncentiveUnit

D1 Air Cooled Chiller Ton $4000 D2 Air Cooled Chiller W ithout Condenser Ton $2000 D3 Computer Room Air Conditioner Ton $3000 D4 Computer Room Air Handler Variable Speed Ton $1000 D5 Water Cooled Centrifugal Chiller Ton $3000 D6 Water Cooled Positive Displacement or Reciprocatin $3000 D7 Uninterruptible Power Supply 20-100 kVA $1000 D8 Uninterruptible Power Supply gt 100 kVA $1000 D9 Mainframe Refresh $2000

D10 Server Refresh $2000 D11 PC Power Managment System $600 D12 HVAC System Optimization $005 D1 3 HoUCold Aisle Containment kWh saved $005 D14 Server Virtualization kW reduction $40000 D1 5 Thin Clients Units $500

efficient compared to the existing Mainframes power supply The replacement Mainframe if Inactive must be decommissioned and removed from the Data Center

Server Refresh Replacement servers must be ENERGY STARreg certified Replacement servers power supply must be 5 more efficiency compared to the power supply of the replaced servers The replaced server must be decommissioned and removed from the data center

HVAC System Optimization Final system must have these features

-Implementation of free cooling by the addition of an economizer system -Conversion of constant speed CRACCRAH into variable speed operations using VFDs and additional control functionalities and -Elevation of exhaust air temperature

HotCold Aisle Containment Includes both Hot and Cold Aisles Installing new containment measures not replacing already existed aisle containment Plenum-only installations not eligible Must result in higher difference between the return air (hot aisle) and supply air (cold aisle) temperatures measured at rack intake and exhaust locations

Server Virtualization Minimum of consolidating 5 Servers virtualized into one Server The virtualized servers if inactive are removed from the Data Center

Thin Clients Must be ENERGY STAR certified thin clients Decommissioned clients are removed from the Data Center

Data Center Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 43

Whole Building Systems Whole Building Systems Approach

The Whole Building Systems approach is intended to encourage integrated energy efficient designs by providing enhanced incentives to the customer who addresses overall energy performance Owners of eligible and qualifying new construction and major renovation projects can receive Whole Building Systems incentives when energy modeling indicates the projectrsquos performance is over 10 better than the ASHRAE 901-2007 Savings from eligible electric end-uses in kilowatt hours define the amount of financial incentive Energy savings achieved through renewable energy sources are not counted toward project energy savings and are not included in the savings basis Incentive reservations obtained during the design phase of a project will be honored for up to 24 months

How to Apply for Whole Building Systems Incentives Before construction begins bull A Pre-notification Application must be submitted documenting the Owners intention to

seek Whole Building Systems incentives bull The Owner must confirm the goals and energy efficiency strategies being pursued by the

design team on the completed Pre-notification Worksheet (Checklist tab) and in the project Summary (Whole Building Performance Summary tab)

bull Submit executable building modeling software files bull Submit the Whole Building Performance Summary worksheet energy simulation model

inputs and outputs and supporting documentation bull Receive confirmation and eligibility notification from the PECO Smart Ideas team and

receive an incentive reservation bull The final incentive paid may differ from the reserved incentive amount The final

incentive will be calculated based on site-verified equipment installation and performance The Owners final application and complete documentation must be received within 6 months of equipment installation or certificate of occupancy whichever is later

bull An executable energy model and model output demonstrating compliance with the criteria of ASHRAE 901-2007 Appendix G will be required and the equipment data sheets LED lighting fixtures must be on the DLC or Energy STAR qualified products list (QPL) to be eligible LED fixtures not on the DLC or Energy STAR QPL has the option of submitting LM79 and LM80 test reports for evaluation against DLC and Energy STAR eligibility criteria

During the construction period bull Owner and design team continue to work closely with their chosen contractor to assure

energy efficiency measures are included and installed in the completed building

When the building is constructed and operational bull Complete the Owner final application Request an equipment verification site visit by the

PECO Smart Ideas team Equipment must be installed and fully operational o Program staff will schedule a site visit and utilize submitted documentation and

measurement tools to verify that the installation follows the submitted energy simulation model

bull When PECO confirms that there are no significant changes to the installed equipment payment of the reserved incentive will be made to the Owner within 6 weeks

bull If changes from the proposed design energy simulation are found the Owner and design team will be notified of the reduced incentive amount a period of 20 calendar days will

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 44

Improvement Incentive per Sq Ft

over Code

~11 to lt20 $0155

~20 to lt30 $0233

~30 to lt40 $0350

~40 to lt60 $0525

~60 $0700

be allowed for supplemental information to be provided if no additional information is received by PECO Smart Ideas team the reduced incentive payments will be made and sent to the Owner if additional clarification and information is available program staff will work diligently to resolve the discrepancies and arrive at a reasonable incentive adjustment with the customer

Payments made by PECO Smart Ideas are final

Customer Eligibility The Owner of the proposed new building project must be a customer of PECO and receive delivery of electric service from PECO to receive kilowatt-hour based incentives Please note that electricity supply can be provided by any vendor

Project Eligibility bull The project must be a new construction or major renovation Major renovations involving

the removal and redesign of at least two building systems (such as interior lighting and mechanical systems) may apply for Whole Building Systems incentives

bull To qualify for incentives projects must demonstrate energy efficiency enhancements that achieve at least 11 improvement in the proposed design versus the standard baseline

bull The Owner must submit a Pre-approval Application to the program at the stage where changes for increased energy efficiency are still feasible and construction has not been completed

bull Projects receiving Whole Building Systems incentives are not eligible to receive other incentives such as the prescriptive or custom program incentives for the same scope

bull Project components that are NOT eligible for consideration as a basis for PECO Smart Ideas include the following o Alternative fuel sources (eg use of gas or oil equipment in lieu of electric) Please note

that combined heat and power (CHP) systems will be incentivized for the electricity they produce

o Renewable energy sources (eg solar wind biomass) bull Ineligible savings include exterior lighting process receptacle miscellaneous loads and

other unregulated end-uses Custom incentives are available for new construction exterior lighting

Whole Building Systems Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 45

Custom Project Specifications Instructions for Energy Savings Calculations for Custom Projects Custom projects must involve measures that result in a reduction in electric energy use (kWh) Electricity savings may result from either efficiency improvements or fuel switching Custom Incentives are based on the first year kilowatt-hour savings Custom applications must be accompanied by detailed engineering calculations that document the annual total energy savings

The following serve as guidelines for the minimum required documentation

Equipment Information Submittals bull A list of the present and proposed equipment and components to be installed

including manufacturerrsquos catalogmodel number bull Manufacturerrsquos specification sheets showing capacities and performance for all major

components

Energy Savings Calculations Provide calculations documenting the predicted energy consumption of the existing (or baseline) and proposed system using appropriate analytical tools and clearly stated assumptions Calculations may be performed by ldquohandrdquo but spreadsheet analysis or more rigorous modeling is preferred All analysis should be provided in electronic format All assumptions such as operating hours existing and proposed equipment operational details must be presented Engineering algorithms and procedures from recognized technical organizations such as ASHRAE SMACNA ANSI etc must be used Use rated performance factors tested under accepted procedures specified by recognized rating agencies such as AHRI ANSI ASTM etc Provide an explanation when equipment performance rating conditions vary from standard conditions

In support of the calculations extensive documentation must be provided that provides the basis for the savings estimates The documentation must provide information on the equipment operating schedule daily and seasonal load profile and baseline AND energy efficient equipment performance at the operating loads Typical documentation for custom projects often includes bull Engineering or architectural drawings and ldquoequipment schedulerdquo sheets bull Component specification sheets that include part load efficiency or performance

factors bull Spreadsheet calculations or inputoutput files and results from system modeling or

other engineering analysis using accepted engineering algorithms and practices bull Log sheets trend logs from a building management system or other operating

documentation that are often necessary to document operating hours and equipment loading and used as a basis for the calculations (in some cases short term monitoring may be required to document the load profile)

bull Control sequence of operations that are necessary where controls play a part in the savings equation

Additional documentation other than that described in the application may be required for program participation Larger projects may also require pre- and post-project sub metering or monitoring of loads andor power input as part of another measurement and verification activity to demonstrate the actual energy savings that are realized

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 46

Baseline for Custom Analysis Where equipment is replaced prior to the end of its rated service life in order to achieve energy savings the existing equipment performance may be used as the baseline in the energy savings calculations Where equipment is replaced due to failure or for other reasons (such as obsolescence or a need for more capacity) the baseline performance used in the savings calculation should be either the minimum performance that would be required by code for that equipment type and application (where a code applies) or the performance of the equipment that would have been selected as the customers standard practice when a code does not apply

Baseline or Existing System Summary On custom worksheet on application form include make model number name plate information (such as operating voltage and rated full load amps) rated capacity quantities equipment condition and age facility operating hours equipment operating schedule and load curves If needed attach separate sheets

All decisions regarding incentives for custom projects are in the sole discretion of PECO

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 47

APPENDIX PROGRAM UPDATES SUMMARY (Q1 2017) Multifamily Nursing Home and Assisted Living retrofit customers need to apply for incentives through the PECO Smart Ideas Multi-Family Program administered by Franklin Energy For more information please contact Taylor Adler at tadlerfranklinenergycom or call 1-844-4BIZ-SAVE Multifamily Nursing Home and Assisted Living new construction customers can proceed with applying for incentives here

Revised Incentives

Data Centers

Measure Incentive Effective Immediately Previous Incentive

Air-cooled chiller for data centers $40ton $10ton Air-cooled chiller without condenser for data centers $20ton $10ton

Computer room air conditioner $30ton $7ton Water-cooled centrifugal chiller for data centers $30ton $5ton Water-cooled positive displacement or reciprocating chiller for data centers

$30ton $5ton

Uninterruptible power supply 20-100 kVA $10kVA $6kVA Uninterruptible power supply gt100 kVA $10kVA $1kVA Mainframe refresh $20kW installed $5kW installed Server refresh $20kW installed $4kW installed Server virtualization $400kW reduction $4kW reduction Thin clients $5units $4units

Lighting (Effective Immediately)

Measure Incentive Effective Immediately Specification Previous

Incentive Specification

New construction exterior LED outdoor flood light LED parking garage and canopy lighting LED polearm mounted parking and roadway lighting LED wall mount fixture

$005kWh (custom)

Lighting Power Density (LPD) Requirements Unchanged

$10-54 fixture

Lighting Power Density (LPD) (Wft2) by Space Type or Building Area

LED Replacement Lamps (Tubes) 2

$250lamp 5 Min Watts Reduced

$250lamp 6 Min Watts Reduced

LED Replacement Lamps (Tubes) 4

$400lamp 10 Min Watts Reduced

$400lamp 12 Min Watts Reduced

Permanent Fixture Removal $010Watt removed

Clarification of calculation to represent actual Wattage removed

$010Watt removed

Lighting (Effective 6117)

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 48

Measure Incentive Effective 6117 Specification Previous

Incentive Previous Specification

Interior LED high-bay fixtures andor retrofit kits if lt 20000 LED Lumens

$50fixture 150 Min Watts Reduced

$75fixture 150 Min Watts Reduced

Interior LED high-bay fixtures andor retrofit kits if gt 20000 LED Lumens

$75fixture 225 Min Watts Reduced

$75fixture 150 Min Watts Reduced

New Incentives

Compressed Air

Measure New Incentive Effective Immediately Variable speed air compressor $30compressor HP Compressed air system optimization $50compressor HP

HVAC

Measure New Incentive Effective Immediately ECM circulation pump $50pump Retro-commissioning cooling systems $750ton Retro-commissioning whole building $010square foot Energy management system $25ton Demand controlled ventilation $25ton Water-cooled air conditioner $22ton

Food Service

Measure New Incentive Effective Immediately Combination oven $200unit ENERGY STARreg commercial convection oven $150unit ENERGY STARreg commercial fryers $100unit ENERGY STARreg commercial hot holding cabinet $200unit

Refrigeration

Measure New Incentive Effective Immediately Air-cooled refrigeration condenser $10ton Oversized condenser with VFD $10ton Case light occupancy controls $750door

Lighting

Measure New Incentive Effective Immediately Interior central lighting controls $00175sq foot

Motors and Drives

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 49

-

Measure New Incentive Effective Immediately VFD for dust collection system motor $50HP

Application Clarifications and Revised Requirements

Clarification of LED Eligibility for New Construction or Retrofit Projects

LED Eligibility is determined by whether lighting products are listed in either the DesignLights Consortium (DLC) Qualified Products List of commercial-grade LED luminaires or the US Environmental Protection Agency database of ENERGY STAR certified products For products not yet listed contractors may submit LM79 and LM80 test reports PECO Smart Ideas engineers will review test reports to determine if the product in question meets performance specifications

Revised W 9 Requirement

W-9 forms EIN numbers are no longer required

Deletion of erroneous statement in New Construction Lighting

The following statement from previous Business Manual has been deleted ldquoThe minimum lighting power density used to calculate the incentive shall be no lower than 50 of the ASHRAE 901-2007 valuerdquo

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 50

  • Commercial amp Industrial Program Application Manual
    • Follow This Easy Process
      • Pre-Approval Application Checklist
      • Final Application Checklist
          • Terms and Conditions
            • Program Effective Dates
            • Program and Project Eligibility
            • Incentive Payment Limits
            • Application Review Process
            • Inspections andor PUCrsquos Statewide Program Evaluation
            • Requirements for Custom Project Electricity Savings Calculation
            • Tax Liability
            • No Endorsement
            • Warranties
            • Limitation of Liability
            • Assignment
            • Customerrsquos Certification
            • Termination
            • Acknowledgement
              • Retrofit Lighting Solutions
                • General Linear Fluorescent Lamp and Ballast Specification Requirements
                • LED Lamps and Fixtures
                • Minimum Watts Reduced
                • Linear LED (Tubes)
                • Permanent Fixture Removal
                  • LED Traffic Signals
                    • LED Traffic Signals Incentive Table
                      • New Construction Lighting Specifications
                        • New Construction Lighting Incentives Table
                          • New Construction Lighting Power Density Code
                              • Exterior New Construction Lighting
                              • HVAC Equipment
                                • Air-Source Air Conditioners and Air-Source Heat Pumps
                                • Package Terminal Systems (Replacements)
                                • Ductless Mini-Split Heat Pump lt54 Tons
                                • Geothermal Heat Pump
                                  • Other HVAC Equipment
                                    • Hotel Guest Room Occupancy Sensor
                                    • ECM Circulation Fan
                                    • ECM Circulation Pump
                                    • Retrocomissioning Cooling Systems
                                    • Retrocomissioning Whole Building
                                    • Energy Management System
                                    • Demand Controlled Ventilation
                                    • Other HVAC Incentives Table
                                      • Unitary HVAC Chillers
                                        • Air-Cooled Chillers Water Cooled Positive Displacement Reciprocating Chillers and Water Cooled Centrifugal Chillers
                                          • Refrigeration
                                            • Anti-Sweat Heater Controls
                                            • Evaporator Fan Controls
                                            • Floating Head Pressure Controls
                                            • Automatic Door Closers for Walk-In Coolers and Freezers
                                            • EC Motor for Walk-inReach-in Refrigerated cases or Freezer cases
                                            • ENERGY STAR Solid Door Freezer and Glass Door Freezer and Refrigerators
                                            • Refrigeration Suction Pipe Insulation
                                            • Night Cover
                                            • Strip Curtain on Walk-In CoolerFreezer
                                            • Evaporator Coil Defrost Control
                                            • Variable Speed Refrigeration Compressor
                                            • Add Doors to Open Refrigerated Cases
                                            • Door Gaskets
                                            • Zero Energy Doors
                                            • Air Cooled Refrigeration Condenser
                                            • Oversized Condenser with VFD
                                            • Case Light Occupancy Controls
                                            • LED Open Case Lighting
                                            • LED Enclosed Case Lighting Refrigerated
                                            • LED Enclosed Case Lighting Freezer
                                              • Food Service
                                                • Beverage and Snack Machine Controls
                                                • ENERGY STARreg Refrigerated Beverage Vending Machines
                                                • ENERGY STARreg Electric Steam Cooker
                                                • ENERGY STARreg Electric Combination Oven
                                                • ENERGY STARreg Commercial Convection Oven
                                                • ENERGY STARreg Commercial Fryers
                                                • ENERGY STARreg Commercial Hot Holding Cabinet
                                                  • Motors and Variable Frequency Drives
                                                    • Early Replacement Motors
                                                    • Variable Frequency Drives on HVAC Fan Applications
                                                    • Variable Frequency Drives on Pump Applications
                                                    • Variable Speed Control for Kitchen Exhaust Hoods
                                                    • Variable Speed Drives for Process or Other Equipment
                                                      • Domestic Hot Water
                                                        • Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater
                                                        • Heat Pump Water Heater
                                                        • Low Flow Pre-Rinse Spray Valve
                                                        • Domestic Hot Water Incentive Table
                                                          • Compressed Air Systems
                                                            • No-loss Condensate Drain
                                                            • Air-Entraining air nozzle
                                                            • Storage Tanks for LoadNo Load Screw Compressors
                                                            • Cycling Refrigerated Thermal Mass Dryer
                                                            • Variable Speed Air Compressor
                                                            • Compressed Air System Optimization
                                                            • Compressed Air Systems Incentive Table
                                                              • Data Centers
                                                                • Air Cooled Chiller
                                                                • Air Cooled Chiller without Condenser
                                                                • Computer Room Air Conditioner
                                                                • Computer Room Air Handler Variable Speed
                                                                  • Replacing constant speed CRAH with VSD CRAH
                                                                    • Water Cooled Centrifugal Chiller
                                                                    • Water Cooled Positive Displacement or Reciprocating Chiller
                                                                    • Uninterruptible Power Supply
                                                                    • Mainframe Refresh
                                                                    • Server Refresh
                                                                      • Whole Building Systems
                                                                        • Whole Building Systems Approach
                                                                        • How to Apply for Whole Building Systems Incentives
                                                                        • Customer Eligibility
                                                                        • Project Eligibility
                                                                        • Whole Building Systems Incentives Table
                                                                          • Custom Project Specifications
                                                                            • Instructions for Energy Savings Calculations for Custom Projects
                                                                            • Equipment Information Submittals
                                                                            • Energy Savings Calculations
                                                                            • Baseline for Custom Analysis
                                                                            • Baseline or Existing System Summary

No-loss Condensate Drain Air-Entraining Air Nozzle Cycling Refrigerated Thermal Mass Dryer

Compressor Incentive per

Equipment Type Units Quantity Daily Operating Unit

Hours

CA04 Storage Tanks for LoadNo Load Screw

Compressor HP $10 Compressors

CA05 Variable Speed Air Compressor

Compressor HP $30

CA06 Compressed Air System Optimization

Compressor HP $50

Compressed Air System Optimization The submitted optimization measures must be identified in an Air System Audit or equivalent study to be eligible The measures must demonstrate energy savings as evaluated by a Program Engineer Additionally measures must also fall under one or more of the category below to be eligible

1) Install storage Receivers (new receivers only replacing existing storage receivers are ineligible)

2) Compressor control (must demonstrate improvement in partial load efficiency of the compress air system including reduceeliminate partially loaded units)

3) Dryer control 4) Source pressure reduction 5) Right-sizing distribution components such as piping filters regulators

connectors and hoses (routine maintenance replacements are ineligible) 6) Leakage detection and repair 7) Eliminate low-efficiency end-usages of compressed air 8) Heat recovery (most reduce electricity consumption of the replaced heat source)

Compressed Air Systems Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 41

lt65000 Btuh

~ 65000 Btuh and lt135000 Btuh

135000 Btuhand lt240000 Btuh

240000 Btuh and lt760000 Btuh

760000 Btuh

154

142

135

125

123

Chiller Capacity Path APath B efficiency (kWton )

lt 150 tons

~150 tons and lt300 tons

300 tons and lt400 tons

400 tons and lt600 tons

600 tons

lt75 tons

~75 tons and lt150 tons

~150 tons and lt300 tons

~300 tons and lt600 tons

600 tons

0610 FU0695 FL and 0550 IPLV0440 IPLV

0610 FU0635 FL and 0550 IPLV0400 IPLV

0560 FU0595 FL and 0520 IPLV0390 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

Path APath B efficiency (kWton )

0750 FU0780 FL and 0600 IPLV0500 IPLV

0720 FU0750 FL and 0560 IPLV0490 IPLV

0660 FU0680 FL and 0540 IPLV0440 IPLV

0610 FU0625 FL and 0520 IPLV0410 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

Data Centers Data Center incentives are available for facilities ranging in size from office server closets to large standalone facilities

Air Cooled Chiller Path APath B EER (BtuWh) lt150 tons 101 FL97 FL and 137 IPLV158 IPLV ge150 tons 101 FL97 FL and 140 IPLV161 IPLV

Air Cooled Chiller without Condenser Air-cooled chillers without condenser must be rated with matching condensers and comply with air-cooled chiller efficiency requirements

Computer Room Air Conditioner

Computer Room Air Handler Variable Speed Replacing constant speed CRAH with VSD CRAH

Water Cooled Centrifugal Chiller

Water Cooled Positive Displacement or Reciprocating Chiller

Uninterruptible Power Supply Must be Energy Star Certified UPS or have full load efficiency rating

ge948 for 20-100 kVA ge978for ge100 kVA

Mainframe Refresh The rated efficiency of the replacement Mainframes power supply must be at least 8 more

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 42

- Equipment Type Units IncentiveUnit

D1 Air Cooled Chiller Ton $4000 D2 Air Cooled Chiller W ithout Condenser Ton $2000 D3 Computer Room Air Conditioner Ton $3000 D4 Computer Room Air Handler Variable Speed Ton $1000 D5 Water Cooled Centrifugal Chiller Ton $3000 D6 Water Cooled Positive Displacement or Reciprocatin $3000 D7 Uninterruptible Power Supply 20-100 kVA $1000 D8 Uninterruptible Power Supply gt 100 kVA $1000 D9 Mainframe Refresh $2000

D10 Server Refresh $2000 D11 PC Power Managment System $600 D12 HVAC System Optimization $005 D1 3 HoUCold Aisle Containment kWh saved $005 D14 Server Virtualization kW reduction $40000 D1 5 Thin Clients Units $500

efficient compared to the existing Mainframes power supply The replacement Mainframe if Inactive must be decommissioned and removed from the Data Center

Server Refresh Replacement servers must be ENERGY STARreg certified Replacement servers power supply must be 5 more efficiency compared to the power supply of the replaced servers The replaced server must be decommissioned and removed from the data center

HVAC System Optimization Final system must have these features

-Implementation of free cooling by the addition of an economizer system -Conversion of constant speed CRACCRAH into variable speed operations using VFDs and additional control functionalities and -Elevation of exhaust air temperature

HotCold Aisle Containment Includes both Hot and Cold Aisles Installing new containment measures not replacing already existed aisle containment Plenum-only installations not eligible Must result in higher difference between the return air (hot aisle) and supply air (cold aisle) temperatures measured at rack intake and exhaust locations

Server Virtualization Minimum of consolidating 5 Servers virtualized into one Server The virtualized servers if inactive are removed from the Data Center

Thin Clients Must be ENERGY STAR certified thin clients Decommissioned clients are removed from the Data Center

Data Center Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 43

Whole Building Systems Whole Building Systems Approach

The Whole Building Systems approach is intended to encourage integrated energy efficient designs by providing enhanced incentives to the customer who addresses overall energy performance Owners of eligible and qualifying new construction and major renovation projects can receive Whole Building Systems incentives when energy modeling indicates the projectrsquos performance is over 10 better than the ASHRAE 901-2007 Savings from eligible electric end-uses in kilowatt hours define the amount of financial incentive Energy savings achieved through renewable energy sources are not counted toward project energy savings and are not included in the savings basis Incentive reservations obtained during the design phase of a project will be honored for up to 24 months

How to Apply for Whole Building Systems Incentives Before construction begins bull A Pre-notification Application must be submitted documenting the Owners intention to

seek Whole Building Systems incentives bull The Owner must confirm the goals and energy efficiency strategies being pursued by the

design team on the completed Pre-notification Worksheet (Checklist tab) and in the project Summary (Whole Building Performance Summary tab)

bull Submit executable building modeling software files bull Submit the Whole Building Performance Summary worksheet energy simulation model

inputs and outputs and supporting documentation bull Receive confirmation and eligibility notification from the PECO Smart Ideas team and

receive an incentive reservation bull The final incentive paid may differ from the reserved incentive amount The final

incentive will be calculated based on site-verified equipment installation and performance The Owners final application and complete documentation must be received within 6 months of equipment installation or certificate of occupancy whichever is later

bull An executable energy model and model output demonstrating compliance with the criteria of ASHRAE 901-2007 Appendix G will be required and the equipment data sheets LED lighting fixtures must be on the DLC or Energy STAR qualified products list (QPL) to be eligible LED fixtures not on the DLC or Energy STAR QPL has the option of submitting LM79 and LM80 test reports for evaluation against DLC and Energy STAR eligibility criteria

During the construction period bull Owner and design team continue to work closely with their chosen contractor to assure

energy efficiency measures are included and installed in the completed building

When the building is constructed and operational bull Complete the Owner final application Request an equipment verification site visit by the

PECO Smart Ideas team Equipment must be installed and fully operational o Program staff will schedule a site visit and utilize submitted documentation and

measurement tools to verify that the installation follows the submitted energy simulation model

bull When PECO confirms that there are no significant changes to the installed equipment payment of the reserved incentive will be made to the Owner within 6 weeks

bull If changes from the proposed design energy simulation are found the Owner and design team will be notified of the reduced incentive amount a period of 20 calendar days will

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 44

Improvement Incentive per Sq Ft

over Code

~11 to lt20 $0155

~20 to lt30 $0233

~30 to lt40 $0350

~40 to lt60 $0525

~60 $0700

be allowed for supplemental information to be provided if no additional information is received by PECO Smart Ideas team the reduced incentive payments will be made and sent to the Owner if additional clarification and information is available program staff will work diligently to resolve the discrepancies and arrive at a reasonable incentive adjustment with the customer

Payments made by PECO Smart Ideas are final

Customer Eligibility The Owner of the proposed new building project must be a customer of PECO and receive delivery of electric service from PECO to receive kilowatt-hour based incentives Please note that electricity supply can be provided by any vendor

Project Eligibility bull The project must be a new construction or major renovation Major renovations involving

the removal and redesign of at least two building systems (such as interior lighting and mechanical systems) may apply for Whole Building Systems incentives

bull To qualify for incentives projects must demonstrate energy efficiency enhancements that achieve at least 11 improvement in the proposed design versus the standard baseline

bull The Owner must submit a Pre-approval Application to the program at the stage where changes for increased energy efficiency are still feasible and construction has not been completed

bull Projects receiving Whole Building Systems incentives are not eligible to receive other incentives such as the prescriptive or custom program incentives for the same scope

bull Project components that are NOT eligible for consideration as a basis for PECO Smart Ideas include the following o Alternative fuel sources (eg use of gas or oil equipment in lieu of electric) Please note

that combined heat and power (CHP) systems will be incentivized for the electricity they produce

o Renewable energy sources (eg solar wind biomass) bull Ineligible savings include exterior lighting process receptacle miscellaneous loads and

other unregulated end-uses Custom incentives are available for new construction exterior lighting

Whole Building Systems Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 45

Custom Project Specifications Instructions for Energy Savings Calculations for Custom Projects Custom projects must involve measures that result in a reduction in electric energy use (kWh) Electricity savings may result from either efficiency improvements or fuel switching Custom Incentives are based on the first year kilowatt-hour savings Custom applications must be accompanied by detailed engineering calculations that document the annual total energy savings

The following serve as guidelines for the minimum required documentation

Equipment Information Submittals bull A list of the present and proposed equipment and components to be installed

including manufacturerrsquos catalogmodel number bull Manufacturerrsquos specification sheets showing capacities and performance for all major

components

Energy Savings Calculations Provide calculations documenting the predicted energy consumption of the existing (or baseline) and proposed system using appropriate analytical tools and clearly stated assumptions Calculations may be performed by ldquohandrdquo but spreadsheet analysis or more rigorous modeling is preferred All analysis should be provided in electronic format All assumptions such as operating hours existing and proposed equipment operational details must be presented Engineering algorithms and procedures from recognized technical organizations such as ASHRAE SMACNA ANSI etc must be used Use rated performance factors tested under accepted procedures specified by recognized rating agencies such as AHRI ANSI ASTM etc Provide an explanation when equipment performance rating conditions vary from standard conditions

In support of the calculations extensive documentation must be provided that provides the basis for the savings estimates The documentation must provide information on the equipment operating schedule daily and seasonal load profile and baseline AND energy efficient equipment performance at the operating loads Typical documentation for custom projects often includes bull Engineering or architectural drawings and ldquoequipment schedulerdquo sheets bull Component specification sheets that include part load efficiency or performance

factors bull Spreadsheet calculations or inputoutput files and results from system modeling or

other engineering analysis using accepted engineering algorithms and practices bull Log sheets trend logs from a building management system or other operating

documentation that are often necessary to document operating hours and equipment loading and used as a basis for the calculations (in some cases short term monitoring may be required to document the load profile)

bull Control sequence of operations that are necessary where controls play a part in the savings equation

Additional documentation other than that described in the application may be required for program participation Larger projects may also require pre- and post-project sub metering or monitoring of loads andor power input as part of another measurement and verification activity to demonstrate the actual energy savings that are realized

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 46

Baseline for Custom Analysis Where equipment is replaced prior to the end of its rated service life in order to achieve energy savings the existing equipment performance may be used as the baseline in the energy savings calculations Where equipment is replaced due to failure or for other reasons (such as obsolescence or a need for more capacity) the baseline performance used in the savings calculation should be either the minimum performance that would be required by code for that equipment type and application (where a code applies) or the performance of the equipment that would have been selected as the customers standard practice when a code does not apply

Baseline or Existing System Summary On custom worksheet on application form include make model number name plate information (such as operating voltage and rated full load amps) rated capacity quantities equipment condition and age facility operating hours equipment operating schedule and load curves If needed attach separate sheets

All decisions regarding incentives for custom projects are in the sole discretion of PECO

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 47

APPENDIX PROGRAM UPDATES SUMMARY (Q1 2017) Multifamily Nursing Home and Assisted Living retrofit customers need to apply for incentives through the PECO Smart Ideas Multi-Family Program administered by Franklin Energy For more information please contact Taylor Adler at tadlerfranklinenergycom or call 1-844-4BIZ-SAVE Multifamily Nursing Home and Assisted Living new construction customers can proceed with applying for incentives here

Revised Incentives

Data Centers

Measure Incentive Effective Immediately Previous Incentive

Air-cooled chiller for data centers $40ton $10ton Air-cooled chiller without condenser for data centers $20ton $10ton

Computer room air conditioner $30ton $7ton Water-cooled centrifugal chiller for data centers $30ton $5ton Water-cooled positive displacement or reciprocating chiller for data centers

$30ton $5ton

Uninterruptible power supply 20-100 kVA $10kVA $6kVA Uninterruptible power supply gt100 kVA $10kVA $1kVA Mainframe refresh $20kW installed $5kW installed Server refresh $20kW installed $4kW installed Server virtualization $400kW reduction $4kW reduction Thin clients $5units $4units

Lighting (Effective Immediately)

Measure Incentive Effective Immediately Specification Previous

Incentive Specification

New construction exterior LED outdoor flood light LED parking garage and canopy lighting LED polearm mounted parking and roadway lighting LED wall mount fixture

$005kWh (custom)

Lighting Power Density (LPD) Requirements Unchanged

$10-54 fixture

Lighting Power Density (LPD) (Wft2) by Space Type or Building Area

LED Replacement Lamps (Tubes) 2

$250lamp 5 Min Watts Reduced

$250lamp 6 Min Watts Reduced

LED Replacement Lamps (Tubes) 4

$400lamp 10 Min Watts Reduced

$400lamp 12 Min Watts Reduced

Permanent Fixture Removal $010Watt removed

Clarification of calculation to represent actual Wattage removed

$010Watt removed

Lighting (Effective 6117)

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 48

Measure Incentive Effective 6117 Specification Previous

Incentive Previous Specification

Interior LED high-bay fixtures andor retrofit kits if lt 20000 LED Lumens

$50fixture 150 Min Watts Reduced

$75fixture 150 Min Watts Reduced

Interior LED high-bay fixtures andor retrofit kits if gt 20000 LED Lumens

$75fixture 225 Min Watts Reduced

$75fixture 150 Min Watts Reduced

New Incentives

Compressed Air

Measure New Incentive Effective Immediately Variable speed air compressor $30compressor HP Compressed air system optimization $50compressor HP

HVAC

Measure New Incentive Effective Immediately ECM circulation pump $50pump Retro-commissioning cooling systems $750ton Retro-commissioning whole building $010square foot Energy management system $25ton Demand controlled ventilation $25ton Water-cooled air conditioner $22ton

Food Service

Measure New Incentive Effective Immediately Combination oven $200unit ENERGY STARreg commercial convection oven $150unit ENERGY STARreg commercial fryers $100unit ENERGY STARreg commercial hot holding cabinet $200unit

Refrigeration

Measure New Incentive Effective Immediately Air-cooled refrigeration condenser $10ton Oversized condenser with VFD $10ton Case light occupancy controls $750door

Lighting

Measure New Incentive Effective Immediately Interior central lighting controls $00175sq foot

Motors and Drives

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 49

-

Measure New Incentive Effective Immediately VFD for dust collection system motor $50HP

Application Clarifications and Revised Requirements

Clarification of LED Eligibility for New Construction or Retrofit Projects

LED Eligibility is determined by whether lighting products are listed in either the DesignLights Consortium (DLC) Qualified Products List of commercial-grade LED luminaires or the US Environmental Protection Agency database of ENERGY STAR certified products For products not yet listed contractors may submit LM79 and LM80 test reports PECO Smart Ideas engineers will review test reports to determine if the product in question meets performance specifications

Revised W 9 Requirement

W-9 forms EIN numbers are no longer required

Deletion of erroneous statement in New Construction Lighting

The following statement from previous Business Manual has been deleted ldquoThe minimum lighting power density used to calculate the incentive shall be no lower than 50 of the ASHRAE 901-2007 valuerdquo

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 50

  • Commercial amp Industrial Program Application Manual
    • Follow This Easy Process
      • Pre-Approval Application Checklist
      • Final Application Checklist
          • Terms and Conditions
            • Program Effective Dates
            • Program and Project Eligibility
            • Incentive Payment Limits
            • Application Review Process
            • Inspections andor PUCrsquos Statewide Program Evaluation
            • Requirements for Custom Project Electricity Savings Calculation
            • Tax Liability
            • No Endorsement
            • Warranties
            • Limitation of Liability
            • Assignment
            • Customerrsquos Certification
            • Termination
            • Acknowledgement
              • Retrofit Lighting Solutions
                • General Linear Fluorescent Lamp and Ballast Specification Requirements
                • LED Lamps and Fixtures
                • Minimum Watts Reduced
                • Linear LED (Tubes)
                • Permanent Fixture Removal
                  • LED Traffic Signals
                    • LED Traffic Signals Incentive Table
                      • New Construction Lighting Specifications
                        • New Construction Lighting Incentives Table
                          • New Construction Lighting Power Density Code
                              • Exterior New Construction Lighting
                              • HVAC Equipment
                                • Air-Source Air Conditioners and Air-Source Heat Pumps
                                • Package Terminal Systems (Replacements)
                                • Ductless Mini-Split Heat Pump lt54 Tons
                                • Geothermal Heat Pump
                                  • Other HVAC Equipment
                                    • Hotel Guest Room Occupancy Sensor
                                    • ECM Circulation Fan
                                    • ECM Circulation Pump
                                    • Retrocomissioning Cooling Systems
                                    • Retrocomissioning Whole Building
                                    • Energy Management System
                                    • Demand Controlled Ventilation
                                    • Other HVAC Incentives Table
                                      • Unitary HVAC Chillers
                                        • Air-Cooled Chillers Water Cooled Positive Displacement Reciprocating Chillers and Water Cooled Centrifugal Chillers
                                          • Refrigeration
                                            • Anti-Sweat Heater Controls
                                            • Evaporator Fan Controls
                                            • Floating Head Pressure Controls
                                            • Automatic Door Closers for Walk-In Coolers and Freezers
                                            • EC Motor for Walk-inReach-in Refrigerated cases or Freezer cases
                                            • ENERGY STAR Solid Door Freezer and Glass Door Freezer and Refrigerators
                                            • Refrigeration Suction Pipe Insulation
                                            • Night Cover
                                            • Strip Curtain on Walk-In CoolerFreezer
                                            • Evaporator Coil Defrost Control
                                            • Variable Speed Refrigeration Compressor
                                            • Add Doors to Open Refrigerated Cases
                                            • Door Gaskets
                                            • Zero Energy Doors
                                            • Air Cooled Refrigeration Condenser
                                            • Oversized Condenser with VFD
                                            • Case Light Occupancy Controls
                                            • LED Open Case Lighting
                                            • LED Enclosed Case Lighting Refrigerated
                                            • LED Enclosed Case Lighting Freezer
                                              • Food Service
                                                • Beverage and Snack Machine Controls
                                                • ENERGY STARreg Refrigerated Beverage Vending Machines
                                                • ENERGY STARreg Electric Steam Cooker
                                                • ENERGY STARreg Electric Combination Oven
                                                • ENERGY STARreg Commercial Convection Oven
                                                • ENERGY STARreg Commercial Fryers
                                                • ENERGY STARreg Commercial Hot Holding Cabinet
                                                  • Motors and Variable Frequency Drives
                                                    • Early Replacement Motors
                                                    • Variable Frequency Drives on HVAC Fan Applications
                                                    • Variable Frequency Drives on Pump Applications
                                                    • Variable Speed Control for Kitchen Exhaust Hoods
                                                    • Variable Speed Drives for Process or Other Equipment
                                                      • Domestic Hot Water
                                                        • Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater
                                                        • Heat Pump Water Heater
                                                        • Low Flow Pre-Rinse Spray Valve
                                                        • Domestic Hot Water Incentive Table
                                                          • Compressed Air Systems
                                                            • No-loss Condensate Drain
                                                            • Air-Entraining air nozzle
                                                            • Storage Tanks for LoadNo Load Screw Compressors
                                                            • Cycling Refrigerated Thermal Mass Dryer
                                                            • Variable Speed Air Compressor
                                                            • Compressed Air System Optimization
                                                            • Compressed Air Systems Incentive Table
                                                              • Data Centers
                                                                • Air Cooled Chiller
                                                                • Air Cooled Chiller without Condenser
                                                                • Computer Room Air Conditioner
                                                                • Computer Room Air Handler Variable Speed
                                                                  • Replacing constant speed CRAH with VSD CRAH
                                                                    • Water Cooled Centrifugal Chiller
                                                                    • Water Cooled Positive Displacement or Reciprocating Chiller
                                                                    • Uninterruptible Power Supply
                                                                    • Mainframe Refresh
                                                                    • Server Refresh
                                                                      • Whole Building Systems
                                                                        • Whole Building Systems Approach
                                                                        • How to Apply for Whole Building Systems Incentives
                                                                        • Customer Eligibility
                                                                        • Project Eligibility
                                                                        • Whole Building Systems Incentives Table
                                                                          • Custom Project Specifications
                                                                            • Instructions for Energy Savings Calculations for Custom Projects
                                                                            • Equipment Information Submittals
                                                                            • Energy Savings Calculations
                                                                            • Baseline for Custom Analysis
                                                                            • Baseline or Existing System Summary

lt65000 Btuh

~ 65000 Btuh and lt135000 Btuh

135000 Btuhand lt240000 Btuh

240000 Btuh and lt760000 Btuh

760000 Btuh

154

142

135

125

123

Chiller Capacity Path APath B efficiency (kWton )

lt 150 tons

~150 tons and lt300 tons

300 tons and lt400 tons

400 tons and lt600 tons

600 tons

lt75 tons

~75 tons and lt150 tons

~150 tons and lt300 tons

~300 tons and lt600 tons

600 tons

0610 FU0695 FL and 0550 IPLV0440 IPLV

0610 FU0635 FL and 0550 IPLV0400 IPLV

0560 FU0595 FL and 0520 IPLV0390 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

Path APath B efficiency (kWton )

0750 FU0780 FL and 0600 IPLV0500 IPLV

0720 FU0750 FL and 0560 IPLV0490 IPLV

0660 FU0680 FL and 0540 IPLV0440 IPLV

0610 FU0625 FL and 0520 IPLV0410 IPLV

0560 FU0585 FL and 0500 IPLV0380 IPLV

Data Centers Data Center incentives are available for facilities ranging in size from office server closets to large standalone facilities

Air Cooled Chiller Path APath B EER (BtuWh) lt150 tons 101 FL97 FL and 137 IPLV158 IPLV ge150 tons 101 FL97 FL and 140 IPLV161 IPLV

Air Cooled Chiller without Condenser Air-cooled chillers without condenser must be rated with matching condensers and comply with air-cooled chiller efficiency requirements

Computer Room Air Conditioner

Computer Room Air Handler Variable Speed Replacing constant speed CRAH with VSD CRAH

Water Cooled Centrifugal Chiller

Water Cooled Positive Displacement or Reciprocating Chiller

Uninterruptible Power Supply Must be Energy Star Certified UPS or have full load efficiency rating

ge948 for 20-100 kVA ge978for ge100 kVA

Mainframe Refresh The rated efficiency of the replacement Mainframes power supply must be at least 8 more

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 42

- Equipment Type Units IncentiveUnit

D1 Air Cooled Chiller Ton $4000 D2 Air Cooled Chiller W ithout Condenser Ton $2000 D3 Computer Room Air Conditioner Ton $3000 D4 Computer Room Air Handler Variable Speed Ton $1000 D5 Water Cooled Centrifugal Chiller Ton $3000 D6 Water Cooled Positive Displacement or Reciprocatin $3000 D7 Uninterruptible Power Supply 20-100 kVA $1000 D8 Uninterruptible Power Supply gt 100 kVA $1000 D9 Mainframe Refresh $2000

D10 Server Refresh $2000 D11 PC Power Managment System $600 D12 HVAC System Optimization $005 D1 3 HoUCold Aisle Containment kWh saved $005 D14 Server Virtualization kW reduction $40000 D1 5 Thin Clients Units $500

efficient compared to the existing Mainframes power supply The replacement Mainframe if Inactive must be decommissioned and removed from the Data Center

Server Refresh Replacement servers must be ENERGY STARreg certified Replacement servers power supply must be 5 more efficiency compared to the power supply of the replaced servers The replaced server must be decommissioned and removed from the data center

HVAC System Optimization Final system must have these features

-Implementation of free cooling by the addition of an economizer system -Conversion of constant speed CRACCRAH into variable speed operations using VFDs and additional control functionalities and -Elevation of exhaust air temperature

HotCold Aisle Containment Includes both Hot and Cold Aisles Installing new containment measures not replacing already existed aisle containment Plenum-only installations not eligible Must result in higher difference between the return air (hot aisle) and supply air (cold aisle) temperatures measured at rack intake and exhaust locations

Server Virtualization Minimum of consolidating 5 Servers virtualized into one Server The virtualized servers if inactive are removed from the Data Center

Thin Clients Must be ENERGY STAR certified thin clients Decommissioned clients are removed from the Data Center

Data Center Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 43

Whole Building Systems Whole Building Systems Approach

The Whole Building Systems approach is intended to encourage integrated energy efficient designs by providing enhanced incentives to the customer who addresses overall energy performance Owners of eligible and qualifying new construction and major renovation projects can receive Whole Building Systems incentives when energy modeling indicates the projectrsquos performance is over 10 better than the ASHRAE 901-2007 Savings from eligible electric end-uses in kilowatt hours define the amount of financial incentive Energy savings achieved through renewable energy sources are not counted toward project energy savings and are not included in the savings basis Incentive reservations obtained during the design phase of a project will be honored for up to 24 months

How to Apply for Whole Building Systems Incentives Before construction begins bull A Pre-notification Application must be submitted documenting the Owners intention to

seek Whole Building Systems incentives bull The Owner must confirm the goals and energy efficiency strategies being pursued by the

design team on the completed Pre-notification Worksheet (Checklist tab) and in the project Summary (Whole Building Performance Summary tab)

bull Submit executable building modeling software files bull Submit the Whole Building Performance Summary worksheet energy simulation model

inputs and outputs and supporting documentation bull Receive confirmation and eligibility notification from the PECO Smart Ideas team and

receive an incentive reservation bull The final incentive paid may differ from the reserved incentive amount The final

incentive will be calculated based on site-verified equipment installation and performance The Owners final application and complete documentation must be received within 6 months of equipment installation or certificate of occupancy whichever is later

bull An executable energy model and model output demonstrating compliance with the criteria of ASHRAE 901-2007 Appendix G will be required and the equipment data sheets LED lighting fixtures must be on the DLC or Energy STAR qualified products list (QPL) to be eligible LED fixtures not on the DLC or Energy STAR QPL has the option of submitting LM79 and LM80 test reports for evaluation against DLC and Energy STAR eligibility criteria

During the construction period bull Owner and design team continue to work closely with their chosen contractor to assure

energy efficiency measures are included and installed in the completed building

When the building is constructed and operational bull Complete the Owner final application Request an equipment verification site visit by the

PECO Smart Ideas team Equipment must be installed and fully operational o Program staff will schedule a site visit and utilize submitted documentation and

measurement tools to verify that the installation follows the submitted energy simulation model

bull When PECO confirms that there are no significant changes to the installed equipment payment of the reserved incentive will be made to the Owner within 6 weeks

bull If changes from the proposed design energy simulation are found the Owner and design team will be notified of the reduced incentive amount a period of 20 calendar days will

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 44

Improvement Incentive per Sq Ft

over Code

~11 to lt20 $0155

~20 to lt30 $0233

~30 to lt40 $0350

~40 to lt60 $0525

~60 $0700

be allowed for supplemental information to be provided if no additional information is received by PECO Smart Ideas team the reduced incentive payments will be made and sent to the Owner if additional clarification and information is available program staff will work diligently to resolve the discrepancies and arrive at a reasonable incentive adjustment with the customer

Payments made by PECO Smart Ideas are final

Customer Eligibility The Owner of the proposed new building project must be a customer of PECO and receive delivery of electric service from PECO to receive kilowatt-hour based incentives Please note that electricity supply can be provided by any vendor

Project Eligibility bull The project must be a new construction or major renovation Major renovations involving

the removal and redesign of at least two building systems (such as interior lighting and mechanical systems) may apply for Whole Building Systems incentives

bull To qualify for incentives projects must demonstrate energy efficiency enhancements that achieve at least 11 improvement in the proposed design versus the standard baseline

bull The Owner must submit a Pre-approval Application to the program at the stage where changes for increased energy efficiency are still feasible and construction has not been completed

bull Projects receiving Whole Building Systems incentives are not eligible to receive other incentives such as the prescriptive or custom program incentives for the same scope

bull Project components that are NOT eligible for consideration as a basis for PECO Smart Ideas include the following o Alternative fuel sources (eg use of gas or oil equipment in lieu of electric) Please note

that combined heat and power (CHP) systems will be incentivized for the electricity they produce

o Renewable energy sources (eg solar wind biomass) bull Ineligible savings include exterior lighting process receptacle miscellaneous loads and

other unregulated end-uses Custom incentives are available for new construction exterior lighting

Whole Building Systems Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 45

Custom Project Specifications Instructions for Energy Savings Calculations for Custom Projects Custom projects must involve measures that result in a reduction in electric energy use (kWh) Electricity savings may result from either efficiency improvements or fuel switching Custom Incentives are based on the first year kilowatt-hour savings Custom applications must be accompanied by detailed engineering calculations that document the annual total energy savings

The following serve as guidelines for the minimum required documentation

Equipment Information Submittals bull A list of the present and proposed equipment and components to be installed

including manufacturerrsquos catalogmodel number bull Manufacturerrsquos specification sheets showing capacities and performance for all major

components

Energy Savings Calculations Provide calculations documenting the predicted energy consumption of the existing (or baseline) and proposed system using appropriate analytical tools and clearly stated assumptions Calculations may be performed by ldquohandrdquo but spreadsheet analysis or more rigorous modeling is preferred All analysis should be provided in electronic format All assumptions such as operating hours existing and proposed equipment operational details must be presented Engineering algorithms and procedures from recognized technical organizations such as ASHRAE SMACNA ANSI etc must be used Use rated performance factors tested under accepted procedures specified by recognized rating agencies such as AHRI ANSI ASTM etc Provide an explanation when equipment performance rating conditions vary from standard conditions

In support of the calculations extensive documentation must be provided that provides the basis for the savings estimates The documentation must provide information on the equipment operating schedule daily and seasonal load profile and baseline AND energy efficient equipment performance at the operating loads Typical documentation for custom projects often includes bull Engineering or architectural drawings and ldquoequipment schedulerdquo sheets bull Component specification sheets that include part load efficiency or performance

factors bull Spreadsheet calculations or inputoutput files and results from system modeling or

other engineering analysis using accepted engineering algorithms and practices bull Log sheets trend logs from a building management system or other operating

documentation that are often necessary to document operating hours and equipment loading and used as a basis for the calculations (in some cases short term monitoring may be required to document the load profile)

bull Control sequence of operations that are necessary where controls play a part in the savings equation

Additional documentation other than that described in the application may be required for program participation Larger projects may also require pre- and post-project sub metering or monitoring of loads andor power input as part of another measurement and verification activity to demonstrate the actual energy savings that are realized

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 46

Baseline for Custom Analysis Where equipment is replaced prior to the end of its rated service life in order to achieve energy savings the existing equipment performance may be used as the baseline in the energy savings calculations Where equipment is replaced due to failure or for other reasons (such as obsolescence or a need for more capacity) the baseline performance used in the savings calculation should be either the minimum performance that would be required by code for that equipment type and application (where a code applies) or the performance of the equipment that would have been selected as the customers standard practice when a code does not apply

Baseline or Existing System Summary On custom worksheet on application form include make model number name plate information (such as operating voltage and rated full load amps) rated capacity quantities equipment condition and age facility operating hours equipment operating schedule and load curves If needed attach separate sheets

All decisions regarding incentives for custom projects are in the sole discretion of PECO

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 47

APPENDIX PROGRAM UPDATES SUMMARY (Q1 2017) Multifamily Nursing Home and Assisted Living retrofit customers need to apply for incentives through the PECO Smart Ideas Multi-Family Program administered by Franklin Energy For more information please contact Taylor Adler at tadlerfranklinenergycom or call 1-844-4BIZ-SAVE Multifamily Nursing Home and Assisted Living new construction customers can proceed with applying for incentives here

Revised Incentives

Data Centers

Measure Incentive Effective Immediately Previous Incentive

Air-cooled chiller for data centers $40ton $10ton Air-cooled chiller without condenser for data centers $20ton $10ton

Computer room air conditioner $30ton $7ton Water-cooled centrifugal chiller for data centers $30ton $5ton Water-cooled positive displacement or reciprocating chiller for data centers

$30ton $5ton

Uninterruptible power supply 20-100 kVA $10kVA $6kVA Uninterruptible power supply gt100 kVA $10kVA $1kVA Mainframe refresh $20kW installed $5kW installed Server refresh $20kW installed $4kW installed Server virtualization $400kW reduction $4kW reduction Thin clients $5units $4units

Lighting (Effective Immediately)

Measure Incentive Effective Immediately Specification Previous

Incentive Specification

New construction exterior LED outdoor flood light LED parking garage and canopy lighting LED polearm mounted parking and roadway lighting LED wall mount fixture

$005kWh (custom)

Lighting Power Density (LPD) Requirements Unchanged

$10-54 fixture

Lighting Power Density (LPD) (Wft2) by Space Type or Building Area

LED Replacement Lamps (Tubes) 2

$250lamp 5 Min Watts Reduced

$250lamp 6 Min Watts Reduced

LED Replacement Lamps (Tubes) 4

$400lamp 10 Min Watts Reduced

$400lamp 12 Min Watts Reduced

Permanent Fixture Removal $010Watt removed

Clarification of calculation to represent actual Wattage removed

$010Watt removed

Lighting (Effective 6117)

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 48

Measure Incentive Effective 6117 Specification Previous

Incentive Previous Specification

Interior LED high-bay fixtures andor retrofit kits if lt 20000 LED Lumens

$50fixture 150 Min Watts Reduced

$75fixture 150 Min Watts Reduced

Interior LED high-bay fixtures andor retrofit kits if gt 20000 LED Lumens

$75fixture 225 Min Watts Reduced

$75fixture 150 Min Watts Reduced

New Incentives

Compressed Air

Measure New Incentive Effective Immediately Variable speed air compressor $30compressor HP Compressed air system optimization $50compressor HP

HVAC

Measure New Incentive Effective Immediately ECM circulation pump $50pump Retro-commissioning cooling systems $750ton Retro-commissioning whole building $010square foot Energy management system $25ton Demand controlled ventilation $25ton Water-cooled air conditioner $22ton

Food Service

Measure New Incentive Effective Immediately Combination oven $200unit ENERGY STARreg commercial convection oven $150unit ENERGY STARreg commercial fryers $100unit ENERGY STARreg commercial hot holding cabinet $200unit

Refrigeration

Measure New Incentive Effective Immediately Air-cooled refrigeration condenser $10ton Oversized condenser with VFD $10ton Case light occupancy controls $750door

Lighting

Measure New Incentive Effective Immediately Interior central lighting controls $00175sq foot

Motors and Drives

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 49

-

Measure New Incentive Effective Immediately VFD for dust collection system motor $50HP

Application Clarifications and Revised Requirements

Clarification of LED Eligibility for New Construction or Retrofit Projects

LED Eligibility is determined by whether lighting products are listed in either the DesignLights Consortium (DLC) Qualified Products List of commercial-grade LED luminaires or the US Environmental Protection Agency database of ENERGY STAR certified products For products not yet listed contractors may submit LM79 and LM80 test reports PECO Smart Ideas engineers will review test reports to determine if the product in question meets performance specifications

Revised W 9 Requirement

W-9 forms EIN numbers are no longer required

Deletion of erroneous statement in New Construction Lighting

The following statement from previous Business Manual has been deleted ldquoThe minimum lighting power density used to calculate the incentive shall be no lower than 50 of the ASHRAE 901-2007 valuerdquo

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 50

  • Commercial amp Industrial Program Application Manual
    • Follow This Easy Process
      • Pre-Approval Application Checklist
      • Final Application Checklist
          • Terms and Conditions
            • Program Effective Dates
            • Program and Project Eligibility
            • Incentive Payment Limits
            • Application Review Process
            • Inspections andor PUCrsquos Statewide Program Evaluation
            • Requirements for Custom Project Electricity Savings Calculation
            • Tax Liability
            • No Endorsement
            • Warranties
            • Limitation of Liability
            • Assignment
            • Customerrsquos Certification
            • Termination
            • Acknowledgement
              • Retrofit Lighting Solutions
                • General Linear Fluorescent Lamp and Ballast Specification Requirements
                • LED Lamps and Fixtures
                • Minimum Watts Reduced
                • Linear LED (Tubes)
                • Permanent Fixture Removal
                  • LED Traffic Signals
                    • LED Traffic Signals Incentive Table
                      • New Construction Lighting Specifications
                        • New Construction Lighting Incentives Table
                          • New Construction Lighting Power Density Code
                              • Exterior New Construction Lighting
                              • HVAC Equipment
                                • Air-Source Air Conditioners and Air-Source Heat Pumps
                                • Package Terminal Systems (Replacements)
                                • Ductless Mini-Split Heat Pump lt54 Tons
                                • Geothermal Heat Pump
                                  • Other HVAC Equipment
                                    • Hotel Guest Room Occupancy Sensor
                                    • ECM Circulation Fan
                                    • ECM Circulation Pump
                                    • Retrocomissioning Cooling Systems
                                    • Retrocomissioning Whole Building
                                    • Energy Management System
                                    • Demand Controlled Ventilation
                                    • Other HVAC Incentives Table
                                      • Unitary HVAC Chillers
                                        • Air-Cooled Chillers Water Cooled Positive Displacement Reciprocating Chillers and Water Cooled Centrifugal Chillers
                                          • Refrigeration
                                            • Anti-Sweat Heater Controls
                                            • Evaporator Fan Controls
                                            • Floating Head Pressure Controls
                                            • Automatic Door Closers for Walk-In Coolers and Freezers
                                            • EC Motor for Walk-inReach-in Refrigerated cases or Freezer cases
                                            • ENERGY STAR Solid Door Freezer and Glass Door Freezer and Refrigerators
                                            • Refrigeration Suction Pipe Insulation
                                            • Night Cover
                                            • Strip Curtain on Walk-In CoolerFreezer
                                            • Evaporator Coil Defrost Control
                                            • Variable Speed Refrigeration Compressor
                                            • Add Doors to Open Refrigerated Cases
                                            • Door Gaskets
                                            • Zero Energy Doors
                                            • Air Cooled Refrigeration Condenser
                                            • Oversized Condenser with VFD
                                            • Case Light Occupancy Controls
                                            • LED Open Case Lighting
                                            • LED Enclosed Case Lighting Refrigerated
                                            • LED Enclosed Case Lighting Freezer
                                              • Food Service
                                                • Beverage and Snack Machine Controls
                                                • ENERGY STARreg Refrigerated Beverage Vending Machines
                                                • ENERGY STARreg Electric Steam Cooker
                                                • ENERGY STARreg Electric Combination Oven
                                                • ENERGY STARreg Commercial Convection Oven
                                                • ENERGY STARreg Commercial Fryers
                                                • ENERGY STARreg Commercial Hot Holding Cabinet
                                                  • Motors and Variable Frequency Drives
                                                    • Early Replacement Motors
                                                    • Variable Frequency Drives on HVAC Fan Applications
                                                    • Variable Frequency Drives on Pump Applications
                                                    • Variable Speed Control for Kitchen Exhaust Hoods
                                                    • Variable Speed Drives for Process or Other Equipment
                                                      • Domestic Hot Water
                                                        • Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater
                                                        • Heat Pump Water Heater
                                                        • Low Flow Pre-Rinse Spray Valve
                                                        • Domestic Hot Water Incentive Table
                                                          • Compressed Air Systems
                                                            • No-loss Condensate Drain
                                                            • Air-Entraining air nozzle
                                                            • Storage Tanks for LoadNo Load Screw Compressors
                                                            • Cycling Refrigerated Thermal Mass Dryer
                                                            • Variable Speed Air Compressor
                                                            • Compressed Air System Optimization
                                                            • Compressed Air Systems Incentive Table
                                                              • Data Centers
                                                                • Air Cooled Chiller
                                                                • Air Cooled Chiller without Condenser
                                                                • Computer Room Air Conditioner
                                                                • Computer Room Air Handler Variable Speed
                                                                  • Replacing constant speed CRAH with VSD CRAH
                                                                    • Water Cooled Centrifugal Chiller
                                                                    • Water Cooled Positive Displacement or Reciprocating Chiller
                                                                    • Uninterruptible Power Supply
                                                                    • Mainframe Refresh
                                                                    • Server Refresh
                                                                      • Whole Building Systems
                                                                        • Whole Building Systems Approach
                                                                        • How to Apply for Whole Building Systems Incentives
                                                                        • Customer Eligibility
                                                                        • Project Eligibility
                                                                        • Whole Building Systems Incentives Table
                                                                          • Custom Project Specifications
                                                                            • Instructions for Energy Savings Calculations for Custom Projects
                                                                            • Equipment Information Submittals
                                                                            • Energy Savings Calculations
                                                                            • Baseline for Custom Analysis
                                                                            • Baseline or Existing System Summary

- Equipment Type Units IncentiveUnit

D1 Air Cooled Chiller Ton $4000 D2 Air Cooled Chiller W ithout Condenser Ton $2000 D3 Computer Room Air Conditioner Ton $3000 D4 Computer Room Air Handler Variable Speed Ton $1000 D5 Water Cooled Centrifugal Chiller Ton $3000 D6 Water Cooled Positive Displacement or Reciprocatin $3000 D7 Uninterruptible Power Supply 20-100 kVA $1000 D8 Uninterruptible Power Supply gt 100 kVA $1000 D9 Mainframe Refresh $2000

D10 Server Refresh $2000 D11 PC Power Managment System $600 D12 HVAC System Optimization $005 D1 3 HoUCold Aisle Containment kWh saved $005 D14 Server Virtualization kW reduction $40000 D1 5 Thin Clients Units $500

efficient compared to the existing Mainframes power supply The replacement Mainframe if Inactive must be decommissioned and removed from the Data Center

Server Refresh Replacement servers must be ENERGY STARreg certified Replacement servers power supply must be 5 more efficiency compared to the power supply of the replaced servers The replaced server must be decommissioned and removed from the data center

HVAC System Optimization Final system must have these features

-Implementation of free cooling by the addition of an economizer system -Conversion of constant speed CRACCRAH into variable speed operations using VFDs and additional control functionalities and -Elevation of exhaust air temperature

HotCold Aisle Containment Includes both Hot and Cold Aisles Installing new containment measures not replacing already existed aisle containment Plenum-only installations not eligible Must result in higher difference between the return air (hot aisle) and supply air (cold aisle) temperatures measured at rack intake and exhaust locations

Server Virtualization Minimum of consolidating 5 Servers virtualized into one Server The virtualized servers if inactive are removed from the Data Center

Thin Clients Must be ENERGY STAR certified thin clients Decommissioned clients are removed from the Data Center

Data Center Incentive Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 43

Whole Building Systems Whole Building Systems Approach

The Whole Building Systems approach is intended to encourage integrated energy efficient designs by providing enhanced incentives to the customer who addresses overall energy performance Owners of eligible and qualifying new construction and major renovation projects can receive Whole Building Systems incentives when energy modeling indicates the projectrsquos performance is over 10 better than the ASHRAE 901-2007 Savings from eligible electric end-uses in kilowatt hours define the amount of financial incentive Energy savings achieved through renewable energy sources are not counted toward project energy savings and are not included in the savings basis Incentive reservations obtained during the design phase of a project will be honored for up to 24 months

How to Apply for Whole Building Systems Incentives Before construction begins bull A Pre-notification Application must be submitted documenting the Owners intention to

seek Whole Building Systems incentives bull The Owner must confirm the goals and energy efficiency strategies being pursued by the

design team on the completed Pre-notification Worksheet (Checklist tab) and in the project Summary (Whole Building Performance Summary tab)

bull Submit executable building modeling software files bull Submit the Whole Building Performance Summary worksheet energy simulation model

inputs and outputs and supporting documentation bull Receive confirmation and eligibility notification from the PECO Smart Ideas team and

receive an incentive reservation bull The final incentive paid may differ from the reserved incentive amount The final

incentive will be calculated based on site-verified equipment installation and performance The Owners final application and complete documentation must be received within 6 months of equipment installation or certificate of occupancy whichever is later

bull An executable energy model and model output demonstrating compliance with the criteria of ASHRAE 901-2007 Appendix G will be required and the equipment data sheets LED lighting fixtures must be on the DLC or Energy STAR qualified products list (QPL) to be eligible LED fixtures not on the DLC or Energy STAR QPL has the option of submitting LM79 and LM80 test reports for evaluation against DLC and Energy STAR eligibility criteria

During the construction period bull Owner and design team continue to work closely with their chosen contractor to assure

energy efficiency measures are included and installed in the completed building

When the building is constructed and operational bull Complete the Owner final application Request an equipment verification site visit by the

PECO Smart Ideas team Equipment must be installed and fully operational o Program staff will schedule a site visit and utilize submitted documentation and

measurement tools to verify that the installation follows the submitted energy simulation model

bull When PECO confirms that there are no significant changes to the installed equipment payment of the reserved incentive will be made to the Owner within 6 weeks

bull If changes from the proposed design energy simulation are found the Owner and design team will be notified of the reduced incentive amount a period of 20 calendar days will

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 44

Improvement Incentive per Sq Ft

over Code

~11 to lt20 $0155

~20 to lt30 $0233

~30 to lt40 $0350

~40 to lt60 $0525

~60 $0700

be allowed for supplemental information to be provided if no additional information is received by PECO Smart Ideas team the reduced incentive payments will be made and sent to the Owner if additional clarification and information is available program staff will work diligently to resolve the discrepancies and arrive at a reasonable incentive adjustment with the customer

Payments made by PECO Smart Ideas are final

Customer Eligibility The Owner of the proposed new building project must be a customer of PECO and receive delivery of electric service from PECO to receive kilowatt-hour based incentives Please note that electricity supply can be provided by any vendor

Project Eligibility bull The project must be a new construction or major renovation Major renovations involving

the removal and redesign of at least two building systems (such as interior lighting and mechanical systems) may apply for Whole Building Systems incentives

bull To qualify for incentives projects must demonstrate energy efficiency enhancements that achieve at least 11 improvement in the proposed design versus the standard baseline

bull The Owner must submit a Pre-approval Application to the program at the stage where changes for increased energy efficiency are still feasible and construction has not been completed

bull Projects receiving Whole Building Systems incentives are not eligible to receive other incentives such as the prescriptive or custom program incentives for the same scope

bull Project components that are NOT eligible for consideration as a basis for PECO Smart Ideas include the following o Alternative fuel sources (eg use of gas or oil equipment in lieu of electric) Please note

that combined heat and power (CHP) systems will be incentivized for the electricity they produce

o Renewable energy sources (eg solar wind biomass) bull Ineligible savings include exterior lighting process receptacle miscellaneous loads and

other unregulated end-uses Custom incentives are available for new construction exterior lighting

Whole Building Systems Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 45

Custom Project Specifications Instructions for Energy Savings Calculations for Custom Projects Custom projects must involve measures that result in a reduction in electric energy use (kWh) Electricity savings may result from either efficiency improvements or fuel switching Custom Incentives are based on the first year kilowatt-hour savings Custom applications must be accompanied by detailed engineering calculations that document the annual total energy savings

The following serve as guidelines for the minimum required documentation

Equipment Information Submittals bull A list of the present and proposed equipment and components to be installed

including manufacturerrsquos catalogmodel number bull Manufacturerrsquos specification sheets showing capacities and performance for all major

components

Energy Savings Calculations Provide calculations documenting the predicted energy consumption of the existing (or baseline) and proposed system using appropriate analytical tools and clearly stated assumptions Calculations may be performed by ldquohandrdquo but spreadsheet analysis or more rigorous modeling is preferred All analysis should be provided in electronic format All assumptions such as operating hours existing and proposed equipment operational details must be presented Engineering algorithms and procedures from recognized technical organizations such as ASHRAE SMACNA ANSI etc must be used Use rated performance factors tested under accepted procedures specified by recognized rating agencies such as AHRI ANSI ASTM etc Provide an explanation when equipment performance rating conditions vary from standard conditions

In support of the calculations extensive documentation must be provided that provides the basis for the savings estimates The documentation must provide information on the equipment operating schedule daily and seasonal load profile and baseline AND energy efficient equipment performance at the operating loads Typical documentation for custom projects often includes bull Engineering or architectural drawings and ldquoequipment schedulerdquo sheets bull Component specification sheets that include part load efficiency or performance

factors bull Spreadsheet calculations or inputoutput files and results from system modeling or

other engineering analysis using accepted engineering algorithms and practices bull Log sheets trend logs from a building management system or other operating

documentation that are often necessary to document operating hours and equipment loading and used as a basis for the calculations (in some cases short term monitoring may be required to document the load profile)

bull Control sequence of operations that are necessary where controls play a part in the savings equation

Additional documentation other than that described in the application may be required for program participation Larger projects may also require pre- and post-project sub metering or monitoring of loads andor power input as part of another measurement and verification activity to demonstrate the actual energy savings that are realized

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 46

Baseline for Custom Analysis Where equipment is replaced prior to the end of its rated service life in order to achieve energy savings the existing equipment performance may be used as the baseline in the energy savings calculations Where equipment is replaced due to failure or for other reasons (such as obsolescence or a need for more capacity) the baseline performance used in the savings calculation should be either the minimum performance that would be required by code for that equipment type and application (where a code applies) or the performance of the equipment that would have been selected as the customers standard practice when a code does not apply

Baseline or Existing System Summary On custom worksheet on application form include make model number name plate information (such as operating voltage and rated full load amps) rated capacity quantities equipment condition and age facility operating hours equipment operating schedule and load curves If needed attach separate sheets

All decisions regarding incentives for custom projects are in the sole discretion of PECO

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 47

APPENDIX PROGRAM UPDATES SUMMARY (Q1 2017) Multifamily Nursing Home and Assisted Living retrofit customers need to apply for incentives through the PECO Smart Ideas Multi-Family Program administered by Franklin Energy For more information please contact Taylor Adler at tadlerfranklinenergycom or call 1-844-4BIZ-SAVE Multifamily Nursing Home and Assisted Living new construction customers can proceed with applying for incentives here

Revised Incentives

Data Centers

Measure Incentive Effective Immediately Previous Incentive

Air-cooled chiller for data centers $40ton $10ton Air-cooled chiller without condenser for data centers $20ton $10ton

Computer room air conditioner $30ton $7ton Water-cooled centrifugal chiller for data centers $30ton $5ton Water-cooled positive displacement or reciprocating chiller for data centers

$30ton $5ton

Uninterruptible power supply 20-100 kVA $10kVA $6kVA Uninterruptible power supply gt100 kVA $10kVA $1kVA Mainframe refresh $20kW installed $5kW installed Server refresh $20kW installed $4kW installed Server virtualization $400kW reduction $4kW reduction Thin clients $5units $4units

Lighting (Effective Immediately)

Measure Incentive Effective Immediately Specification Previous

Incentive Specification

New construction exterior LED outdoor flood light LED parking garage and canopy lighting LED polearm mounted parking and roadway lighting LED wall mount fixture

$005kWh (custom)

Lighting Power Density (LPD) Requirements Unchanged

$10-54 fixture

Lighting Power Density (LPD) (Wft2) by Space Type or Building Area

LED Replacement Lamps (Tubes) 2

$250lamp 5 Min Watts Reduced

$250lamp 6 Min Watts Reduced

LED Replacement Lamps (Tubes) 4

$400lamp 10 Min Watts Reduced

$400lamp 12 Min Watts Reduced

Permanent Fixture Removal $010Watt removed

Clarification of calculation to represent actual Wattage removed

$010Watt removed

Lighting (Effective 6117)

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 48

Measure Incentive Effective 6117 Specification Previous

Incentive Previous Specification

Interior LED high-bay fixtures andor retrofit kits if lt 20000 LED Lumens

$50fixture 150 Min Watts Reduced

$75fixture 150 Min Watts Reduced

Interior LED high-bay fixtures andor retrofit kits if gt 20000 LED Lumens

$75fixture 225 Min Watts Reduced

$75fixture 150 Min Watts Reduced

New Incentives

Compressed Air

Measure New Incentive Effective Immediately Variable speed air compressor $30compressor HP Compressed air system optimization $50compressor HP

HVAC

Measure New Incentive Effective Immediately ECM circulation pump $50pump Retro-commissioning cooling systems $750ton Retro-commissioning whole building $010square foot Energy management system $25ton Demand controlled ventilation $25ton Water-cooled air conditioner $22ton

Food Service

Measure New Incentive Effective Immediately Combination oven $200unit ENERGY STARreg commercial convection oven $150unit ENERGY STARreg commercial fryers $100unit ENERGY STARreg commercial hot holding cabinet $200unit

Refrigeration

Measure New Incentive Effective Immediately Air-cooled refrigeration condenser $10ton Oversized condenser with VFD $10ton Case light occupancy controls $750door

Lighting

Measure New Incentive Effective Immediately Interior central lighting controls $00175sq foot

Motors and Drives

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 49

-

Measure New Incentive Effective Immediately VFD for dust collection system motor $50HP

Application Clarifications and Revised Requirements

Clarification of LED Eligibility for New Construction or Retrofit Projects

LED Eligibility is determined by whether lighting products are listed in either the DesignLights Consortium (DLC) Qualified Products List of commercial-grade LED luminaires or the US Environmental Protection Agency database of ENERGY STAR certified products For products not yet listed contractors may submit LM79 and LM80 test reports PECO Smart Ideas engineers will review test reports to determine if the product in question meets performance specifications

Revised W 9 Requirement

W-9 forms EIN numbers are no longer required

Deletion of erroneous statement in New Construction Lighting

The following statement from previous Business Manual has been deleted ldquoThe minimum lighting power density used to calculate the incentive shall be no lower than 50 of the ASHRAE 901-2007 valuerdquo

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 50

  • Commercial amp Industrial Program Application Manual
    • Follow This Easy Process
      • Pre-Approval Application Checklist
      • Final Application Checklist
          • Terms and Conditions
            • Program Effective Dates
            • Program and Project Eligibility
            • Incentive Payment Limits
            • Application Review Process
            • Inspections andor PUCrsquos Statewide Program Evaluation
            • Requirements for Custom Project Electricity Savings Calculation
            • Tax Liability
            • No Endorsement
            • Warranties
            • Limitation of Liability
            • Assignment
            • Customerrsquos Certification
            • Termination
            • Acknowledgement
              • Retrofit Lighting Solutions
                • General Linear Fluorescent Lamp and Ballast Specification Requirements
                • LED Lamps and Fixtures
                • Minimum Watts Reduced
                • Linear LED (Tubes)
                • Permanent Fixture Removal
                  • LED Traffic Signals
                    • LED Traffic Signals Incentive Table
                      • New Construction Lighting Specifications
                        • New Construction Lighting Incentives Table
                          • New Construction Lighting Power Density Code
                              • Exterior New Construction Lighting
                              • HVAC Equipment
                                • Air-Source Air Conditioners and Air-Source Heat Pumps
                                • Package Terminal Systems (Replacements)
                                • Ductless Mini-Split Heat Pump lt54 Tons
                                • Geothermal Heat Pump
                                  • Other HVAC Equipment
                                    • Hotel Guest Room Occupancy Sensor
                                    • ECM Circulation Fan
                                    • ECM Circulation Pump
                                    • Retrocomissioning Cooling Systems
                                    • Retrocomissioning Whole Building
                                    • Energy Management System
                                    • Demand Controlled Ventilation
                                    • Other HVAC Incentives Table
                                      • Unitary HVAC Chillers
                                        • Air-Cooled Chillers Water Cooled Positive Displacement Reciprocating Chillers and Water Cooled Centrifugal Chillers
                                          • Refrigeration
                                            • Anti-Sweat Heater Controls
                                            • Evaporator Fan Controls
                                            • Floating Head Pressure Controls
                                            • Automatic Door Closers for Walk-In Coolers and Freezers
                                            • EC Motor for Walk-inReach-in Refrigerated cases or Freezer cases
                                            • ENERGY STAR Solid Door Freezer and Glass Door Freezer and Refrigerators
                                            • Refrigeration Suction Pipe Insulation
                                            • Night Cover
                                            • Strip Curtain on Walk-In CoolerFreezer
                                            • Evaporator Coil Defrost Control
                                            • Variable Speed Refrigeration Compressor
                                            • Add Doors to Open Refrigerated Cases
                                            • Door Gaskets
                                            • Zero Energy Doors
                                            • Air Cooled Refrigeration Condenser
                                            • Oversized Condenser with VFD
                                            • Case Light Occupancy Controls
                                            • LED Open Case Lighting
                                            • LED Enclosed Case Lighting Refrigerated
                                            • LED Enclosed Case Lighting Freezer
                                              • Food Service
                                                • Beverage and Snack Machine Controls
                                                • ENERGY STARreg Refrigerated Beverage Vending Machines
                                                • ENERGY STARreg Electric Steam Cooker
                                                • ENERGY STARreg Electric Combination Oven
                                                • ENERGY STARreg Commercial Convection Oven
                                                • ENERGY STARreg Commercial Fryers
                                                • ENERGY STARreg Commercial Hot Holding Cabinet
                                                  • Motors and Variable Frequency Drives
                                                    • Early Replacement Motors
                                                    • Variable Frequency Drives on HVAC Fan Applications
                                                    • Variable Frequency Drives on Pump Applications
                                                    • Variable Speed Control for Kitchen Exhaust Hoods
                                                    • Variable Speed Drives for Process or Other Equipment
                                                      • Domestic Hot Water
                                                        • Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater
                                                        • Heat Pump Water Heater
                                                        • Low Flow Pre-Rinse Spray Valve
                                                        • Domestic Hot Water Incentive Table
                                                          • Compressed Air Systems
                                                            • No-loss Condensate Drain
                                                            • Air-Entraining air nozzle
                                                            • Storage Tanks for LoadNo Load Screw Compressors
                                                            • Cycling Refrigerated Thermal Mass Dryer
                                                            • Variable Speed Air Compressor
                                                            • Compressed Air System Optimization
                                                            • Compressed Air Systems Incentive Table
                                                              • Data Centers
                                                                • Air Cooled Chiller
                                                                • Air Cooled Chiller without Condenser
                                                                • Computer Room Air Conditioner
                                                                • Computer Room Air Handler Variable Speed
                                                                  • Replacing constant speed CRAH with VSD CRAH
                                                                    • Water Cooled Centrifugal Chiller
                                                                    • Water Cooled Positive Displacement or Reciprocating Chiller
                                                                    • Uninterruptible Power Supply
                                                                    • Mainframe Refresh
                                                                    • Server Refresh
                                                                      • Whole Building Systems
                                                                        • Whole Building Systems Approach
                                                                        • How to Apply for Whole Building Systems Incentives
                                                                        • Customer Eligibility
                                                                        • Project Eligibility
                                                                        • Whole Building Systems Incentives Table
                                                                          • Custom Project Specifications
                                                                            • Instructions for Energy Savings Calculations for Custom Projects
                                                                            • Equipment Information Submittals
                                                                            • Energy Savings Calculations
                                                                            • Baseline for Custom Analysis
                                                                            • Baseline or Existing System Summary

Whole Building Systems Whole Building Systems Approach

The Whole Building Systems approach is intended to encourage integrated energy efficient designs by providing enhanced incentives to the customer who addresses overall energy performance Owners of eligible and qualifying new construction and major renovation projects can receive Whole Building Systems incentives when energy modeling indicates the projectrsquos performance is over 10 better than the ASHRAE 901-2007 Savings from eligible electric end-uses in kilowatt hours define the amount of financial incentive Energy savings achieved through renewable energy sources are not counted toward project energy savings and are not included in the savings basis Incentive reservations obtained during the design phase of a project will be honored for up to 24 months

How to Apply for Whole Building Systems Incentives Before construction begins bull A Pre-notification Application must be submitted documenting the Owners intention to

seek Whole Building Systems incentives bull The Owner must confirm the goals and energy efficiency strategies being pursued by the

design team on the completed Pre-notification Worksheet (Checklist tab) and in the project Summary (Whole Building Performance Summary tab)

bull Submit executable building modeling software files bull Submit the Whole Building Performance Summary worksheet energy simulation model

inputs and outputs and supporting documentation bull Receive confirmation and eligibility notification from the PECO Smart Ideas team and

receive an incentive reservation bull The final incentive paid may differ from the reserved incentive amount The final

incentive will be calculated based on site-verified equipment installation and performance The Owners final application and complete documentation must be received within 6 months of equipment installation or certificate of occupancy whichever is later

bull An executable energy model and model output demonstrating compliance with the criteria of ASHRAE 901-2007 Appendix G will be required and the equipment data sheets LED lighting fixtures must be on the DLC or Energy STAR qualified products list (QPL) to be eligible LED fixtures not on the DLC or Energy STAR QPL has the option of submitting LM79 and LM80 test reports for evaluation against DLC and Energy STAR eligibility criteria

During the construction period bull Owner and design team continue to work closely with their chosen contractor to assure

energy efficiency measures are included and installed in the completed building

When the building is constructed and operational bull Complete the Owner final application Request an equipment verification site visit by the

PECO Smart Ideas team Equipment must be installed and fully operational o Program staff will schedule a site visit and utilize submitted documentation and

measurement tools to verify that the installation follows the submitted energy simulation model

bull When PECO confirms that there are no significant changes to the installed equipment payment of the reserved incentive will be made to the Owner within 6 weeks

bull If changes from the proposed design energy simulation are found the Owner and design team will be notified of the reduced incentive amount a period of 20 calendar days will

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 44

Improvement Incentive per Sq Ft

over Code

~11 to lt20 $0155

~20 to lt30 $0233

~30 to lt40 $0350

~40 to lt60 $0525

~60 $0700

be allowed for supplemental information to be provided if no additional information is received by PECO Smart Ideas team the reduced incentive payments will be made and sent to the Owner if additional clarification and information is available program staff will work diligently to resolve the discrepancies and arrive at a reasonable incentive adjustment with the customer

Payments made by PECO Smart Ideas are final

Customer Eligibility The Owner of the proposed new building project must be a customer of PECO and receive delivery of electric service from PECO to receive kilowatt-hour based incentives Please note that electricity supply can be provided by any vendor

Project Eligibility bull The project must be a new construction or major renovation Major renovations involving

the removal and redesign of at least two building systems (such as interior lighting and mechanical systems) may apply for Whole Building Systems incentives

bull To qualify for incentives projects must demonstrate energy efficiency enhancements that achieve at least 11 improvement in the proposed design versus the standard baseline

bull The Owner must submit a Pre-approval Application to the program at the stage where changes for increased energy efficiency are still feasible and construction has not been completed

bull Projects receiving Whole Building Systems incentives are not eligible to receive other incentives such as the prescriptive or custom program incentives for the same scope

bull Project components that are NOT eligible for consideration as a basis for PECO Smart Ideas include the following o Alternative fuel sources (eg use of gas or oil equipment in lieu of electric) Please note

that combined heat and power (CHP) systems will be incentivized for the electricity they produce

o Renewable energy sources (eg solar wind biomass) bull Ineligible savings include exterior lighting process receptacle miscellaneous loads and

other unregulated end-uses Custom incentives are available for new construction exterior lighting

Whole Building Systems Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 45

Custom Project Specifications Instructions for Energy Savings Calculations for Custom Projects Custom projects must involve measures that result in a reduction in electric energy use (kWh) Electricity savings may result from either efficiency improvements or fuel switching Custom Incentives are based on the first year kilowatt-hour savings Custom applications must be accompanied by detailed engineering calculations that document the annual total energy savings

The following serve as guidelines for the minimum required documentation

Equipment Information Submittals bull A list of the present and proposed equipment and components to be installed

including manufacturerrsquos catalogmodel number bull Manufacturerrsquos specification sheets showing capacities and performance for all major

components

Energy Savings Calculations Provide calculations documenting the predicted energy consumption of the existing (or baseline) and proposed system using appropriate analytical tools and clearly stated assumptions Calculations may be performed by ldquohandrdquo but spreadsheet analysis or more rigorous modeling is preferred All analysis should be provided in electronic format All assumptions such as operating hours existing and proposed equipment operational details must be presented Engineering algorithms and procedures from recognized technical organizations such as ASHRAE SMACNA ANSI etc must be used Use rated performance factors tested under accepted procedures specified by recognized rating agencies such as AHRI ANSI ASTM etc Provide an explanation when equipment performance rating conditions vary from standard conditions

In support of the calculations extensive documentation must be provided that provides the basis for the savings estimates The documentation must provide information on the equipment operating schedule daily and seasonal load profile and baseline AND energy efficient equipment performance at the operating loads Typical documentation for custom projects often includes bull Engineering or architectural drawings and ldquoequipment schedulerdquo sheets bull Component specification sheets that include part load efficiency or performance

factors bull Spreadsheet calculations or inputoutput files and results from system modeling or

other engineering analysis using accepted engineering algorithms and practices bull Log sheets trend logs from a building management system or other operating

documentation that are often necessary to document operating hours and equipment loading and used as a basis for the calculations (in some cases short term monitoring may be required to document the load profile)

bull Control sequence of operations that are necessary where controls play a part in the savings equation

Additional documentation other than that described in the application may be required for program participation Larger projects may also require pre- and post-project sub metering or monitoring of loads andor power input as part of another measurement and verification activity to demonstrate the actual energy savings that are realized

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 46

Baseline for Custom Analysis Where equipment is replaced prior to the end of its rated service life in order to achieve energy savings the existing equipment performance may be used as the baseline in the energy savings calculations Where equipment is replaced due to failure or for other reasons (such as obsolescence or a need for more capacity) the baseline performance used in the savings calculation should be either the minimum performance that would be required by code for that equipment type and application (where a code applies) or the performance of the equipment that would have been selected as the customers standard practice when a code does not apply

Baseline or Existing System Summary On custom worksheet on application form include make model number name plate information (such as operating voltage and rated full load amps) rated capacity quantities equipment condition and age facility operating hours equipment operating schedule and load curves If needed attach separate sheets

All decisions regarding incentives for custom projects are in the sole discretion of PECO

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 47

APPENDIX PROGRAM UPDATES SUMMARY (Q1 2017) Multifamily Nursing Home and Assisted Living retrofit customers need to apply for incentives through the PECO Smart Ideas Multi-Family Program administered by Franklin Energy For more information please contact Taylor Adler at tadlerfranklinenergycom or call 1-844-4BIZ-SAVE Multifamily Nursing Home and Assisted Living new construction customers can proceed with applying for incentives here

Revised Incentives

Data Centers

Measure Incentive Effective Immediately Previous Incentive

Air-cooled chiller for data centers $40ton $10ton Air-cooled chiller without condenser for data centers $20ton $10ton

Computer room air conditioner $30ton $7ton Water-cooled centrifugal chiller for data centers $30ton $5ton Water-cooled positive displacement or reciprocating chiller for data centers

$30ton $5ton

Uninterruptible power supply 20-100 kVA $10kVA $6kVA Uninterruptible power supply gt100 kVA $10kVA $1kVA Mainframe refresh $20kW installed $5kW installed Server refresh $20kW installed $4kW installed Server virtualization $400kW reduction $4kW reduction Thin clients $5units $4units

Lighting (Effective Immediately)

Measure Incentive Effective Immediately Specification Previous

Incentive Specification

New construction exterior LED outdoor flood light LED parking garage and canopy lighting LED polearm mounted parking and roadway lighting LED wall mount fixture

$005kWh (custom)

Lighting Power Density (LPD) Requirements Unchanged

$10-54 fixture

Lighting Power Density (LPD) (Wft2) by Space Type or Building Area

LED Replacement Lamps (Tubes) 2

$250lamp 5 Min Watts Reduced

$250lamp 6 Min Watts Reduced

LED Replacement Lamps (Tubes) 4

$400lamp 10 Min Watts Reduced

$400lamp 12 Min Watts Reduced

Permanent Fixture Removal $010Watt removed

Clarification of calculation to represent actual Wattage removed

$010Watt removed

Lighting (Effective 6117)

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 48

Measure Incentive Effective 6117 Specification Previous

Incentive Previous Specification

Interior LED high-bay fixtures andor retrofit kits if lt 20000 LED Lumens

$50fixture 150 Min Watts Reduced

$75fixture 150 Min Watts Reduced

Interior LED high-bay fixtures andor retrofit kits if gt 20000 LED Lumens

$75fixture 225 Min Watts Reduced

$75fixture 150 Min Watts Reduced

New Incentives

Compressed Air

Measure New Incentive Effective Immediately Variable speed air compressor $30compressor HP Compressed air system optimization $50compressor HP

HVAC

Measure New Incentive Effective Immediately ECM circulation pump $50pump Retro-commissioning cooling systems $750ton Retro-commissioning whole building $010square foot Energy management system $25ton Demand controlled ventilation $25ton Water-cooled air conditioner $22ton

Food Service

Measure New Incentive Effective Immediately Combination oven $200unit ENERGY STARreg commercial convection oven $150unit ENERGY STARreg commercial fryers $100unit ENERGY STARreg commercial hot holding cabinet $200unit

Refrigeration

Measure New Incentive Effective Immediately Air-cooled refrigeration condenser $10ton Oversized condenser with VFD $10ton Case light occupancy controls $750door

Lighting

Measure New Incentive Effective Immediately Interior central lighting controls $00175sq foot

Motors and Drives

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 49

-

Measure New Incentive Effective Immediately VFD for dust collection system motor $50HP

Application Clarifications and Revised Requirements

Clarification of LED Eligibility for New Construction or Retrofit Projects

LED Eligibility is determined by whether lighting products are listed in either the DesignLights Consortium (DLC) Qualified Products List of commercial-grade LED luminaires or the US Environmental Protection Agency database of ENERGY STAR certified products For products not yet listed contractors may submit LM79 and LM80 test reports PECO Smart Ideas engineers will review test reports to determine if the product in question meets performance specifications

Revised W 9 Requirement

W-9 forms EIN numbers are no longer required

Deletion of erroneous statement in New Construction Lighting

The following statement from previous Business Manual has been deleted ldquoThe minimum lighting power density used to calculate the incentive shall be no lower than 50 of the ASHRAE 901-2007 valuerdquo

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 50

  • Commercial amp Industrial Program Application Manual
    • Follow This Easy Process
      • Pre-Approval Application Checklist
      • Final Application Checklist
          • Terms and Conditions
            • Program Effective Dates
            • Program and Project Eligibility
            • Incentive Payment Limits
            • Application Review Process
            • Inspections andor PUCrsquos Statewide Program Evaluation
            • Requirements for Custom Project Electricity Savings Calculation
            • Tax Liability
            • No Endorsement
            • Warranties
            • Limitation of Liability
            • Assignment
            • Customerrsquos Certification
            • Termination
            • Acknowledgement
              • Retrofit Lighting Solutions
                • General Linear Fluorescent Lamp and Ballast Specification Requirements
                • LED Lamps and Fixtures
                • Minimum Watts Reduced
                • Linear LED (Tubes)
                • Permanent Fixture Removal
                  • LED Traffic Signals
                    • LED Traffic Signals Incentive Table
                      • New Construction Lighting Specifications
                        • New Construction Lighting Incentives Table
                          • New Construction Lighting Power Density Code
                              • Exterior New Construction Lighting
                              • HVAC Equipment
                                • Air-Source Air Conditioners and Air-Source Heat Pumps
                                • Package Terminal Systems (Replacements)
                                • Ductless Mini-Split Heat Pump lt54 Tons
                                • Geothermal Heat Pump
                                  • Other HVAC Equipment
                                    • Hotel Guest Room Occupancy Sensor
                                    • ECM Circulation Fan
                                    • ECM Circulation Pump
                                    • Retrocomissioning Cooling Systems
                                    • Retrocomissioning Whole Building
                                    • Energy Management System
                                    • Demand Controlled Ventilation
                                    • Other HVAC Incentives Table
                                      • Unitary HVAC Chillers
                                        • Air-Cooled Chillers Water Cooled Positive Displacement Reciprocating Chillers and Water Cooled Centrifugal Chillers
                                          • Refrigeration
                                            • Anti-Sweat Heater Controls
                                            • Evaporator Fan Controls
                                            • Floating Head Pressure Controls
                                            • Automatic Door Closers for Walk-In Coolers and Freezers
                                            • EC Motor for Walk-inReach-in Refrigerated cases or Freezer cases
                                            • ENERGY STAR Solid Door Freezer and Glass Door Freezer and Refrigerators
                                            • Refrigeration Suction Pipe Insulation
                                            • Night Cover
                                            • Strip Curtain on Walk-In CoolerFreezer
                                            • Evaporator Coil Defrost Control
                                            • Variable Speed Refrigeration Compressor
                                            • Add Doors to Open Refrigerated Cases
                                            • Door Gaskets
                                            • Zero Energy Doors
                                            • Air Cooled Refrigeration Condenser
                                            • Oversized Condenser with VFD
                                            • Case Light Occupancy Controls
                                            • LED Open Case Lighting
                                            • LED Enclosed Case Lighting Refrigerated
                                            • LED Enclosed Case Lighting Freezer
                                              • Food Service
                                                • Beverage and Snack Machine Controls
                                                • ENERGY STARreg Refrigerated Beverage Vending Machines
                                                • ENERGY STARreg Electric Steam Cooker
                                                • ENERGY STARreg Electric Combination Oven
                                                • ENERGY STARreg Commercial Convection Oven
                                                • ENERGY STARreg Commercial Fryers
                                                • ENERGY STARreg Commercial Hot Holding Cabinet
                                                  • Motors and Variable Frequency Drives
                                                    • Early Replacement Motors
                                                    • Variable Frequency Drives on HVAC Fan Applications
                                                    • Variable Frequency Drives on Pump Applications
                                                    • Variable Speed Control for Kitchen Exhaust Hoods
                                                    • Variable Speed Drives for Process or Other Equipment
                                                      • Domestic Hot Water
                                                        • Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater
                                                        • Heat Pump Water Heater
                                                        • Low Flow Pre-Rinse Spray Valve
                                                        • Domestic Hot Water Incentive Table
                                                          • Compressed Air Systems
                                                            • No-loss Condensate Drain
                                                            • Air-Entraining air nozzle
                                                            • Storage Tanks for LoadNo Load Screw Compressors
                                                            • Cycling Refrigerated Thermal Mass Dryer
                                                            • Variable Speed Air Compressor
                                                            • Compressed Air System Optimization
                                                            • Compressed Air Systems Incentive Table
                                                              • Data Centers
                                                                • Air Cooled Chiller
                                                                • Air Cooled Chiller without Condenser
                                                                • Computer Room Air Conditioner
                                                                • Computer Room Air Handler Variable Speed
                                                                  • Replacing constant speed CRAH with VSD CRAH
                                                                    • Water Cooled Centrifugal Chiller
                                                                    • Water Cooled Positive Displacement or Reciprocating Chiller
                                                                    • Uninterruptible Power Supply
                                                                    • Mainframe Refresh
                                                                    • Server Refresh
                                                                      • Whole Building Systems
                                                                        • Whole Building Systems Approach
                                                                        • How to Apply for Whole Building Systems Incentives
                                                                        • Customer Eligibility
                                                                        • Project Eligibility
                                                                        • Whole Building Systems Incentives Table
                                                                          • Custom Project Specifications
                                                                            • Instructions for Energy Savings Calculations for Custom Projects
                                                                            • Equipment Information Submittals
                                                                            • Energy Savings Calculations
                                                                            • Baseline for Custom Analysis
                                                                            • Baseline or Existing System Summary

Improvement Incentive per Sq Ft

over Code

~11 to lt20 $0155

~20 to lt30 $0233

~30 to lt40 $0350

~40 to lt60 $0525

~60 $0700

be allowed for supplemental information to be provided if no additional information is received by PECO Smart Ideas team the reduced incentive payments will be made and sent to the Owner if additional clarification and information is available program staff will work diligently to resolve the discrepancies and arrive at a reasonable incentive adjustment with the customer

Payments made by PECO Smart Ideas are final

Customer Eligibility The Owner of the proposed new building project must be a customer of PECO and receive delivery of electric service from PECO to receive kilowatt-hour based incentives Please note that electricity supply can be provided by any vendor

Project Eligibility bull The project must be a new construction or major renovation Major renovations involving

the removal and redesign of at least two building systems (such as interior lighting and mechanical systems) may apply for Whole Building Systems incentives

bull To qualify for incentives projects must demonstrate energy efficiency enhancements that achieve at least 11 improvement in the proposed design versus the standard baseline

bull The Owner must submit a Pre-approval Application to the program at the stage where changes for increased energy efficiency are still feasible and construction has not been completed

bull Projects receiving Whole Building Systems incentives are not eligible to receive other incentives such as the prescriptive or custom program incentives for the same scope

bull Project components that are NOT eligible for consideration as a basis for PECO Smart Ideas include the following o Alternative fuel sources (eg use of gas or oil equipment in lieu of electric) Please note

that combined heat and power (CHP) systems will be incentivized for the electricity they produce

o Renewable energy sources (eg solar wind biomass) bull Ineligible savings include exterior lighting process receptacle miscellaneous loads and

other unregulated end-uses Custom incentives are available for new construction exterior lighting

Whole Building Systems Incentives Table

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 45

Custom Project Specifications Instructions for Energy Savings Calculations for Custom Projects Custom projects must involve measures that result in a reduction in electric energy use (kWh) Electricity savings may result from either efficiency improvements or fuel switching Custom Incentives are based on the first year kilowatt-hour savings Custom applications must be accompanied by detailed engineering calculations that document the annual total energy savings

The following serve as guidelines for the minimum required documentation

Equipment Information Submittals bull A list of the present and proposed equipment and components to be installed

including manufacturerrsquos catalogmodel number bull Manufacturerrsquos specification sheets showing capacities and performance for all major

components

Energy Savings Calculations Provide calculations documenting the predicted energy consumption of the existing (or baseline) and proposed system using appropriate analytical tools and clearly stated assumptions Calculations may be performed by ldquohandrdquo but spreadsheet analysis or more rigorous modeling is preferred All analysis should be provided in electronic format All assumptions such as operating hours existing and proposed equipment operational details must be presented Engineering algorithms and procedures from recognized technical organizations such as ASHRAE SMACNA ANSI etc must be used Use rated performance factors tested under accepted procedures specified by recognized rating agencies such as AHRI ANSI ASTM etc Provide an explanation when equipment performance rating conditions vary from standard conditions

In support of the calculations extensive documentation must be provided that provides the basis for the savings estimates The documentation must provide information on the equipment operating schedule daily and seasonal load profile and baseline AND energy efficient equipment performance at the operating loads Typical documentation for custom projects often includes bull Engineering or architectural drawings and ldquoequipment schedulerdquo sheets bull Component specification sheets that include part load efficiency or performance

factors bull Spreadsheet calculations or inputoutput files and results from system modeling or

other engineering analysis using accepted engineering algorithms and practices bull Log sheets trend logs from a building management system or other operating

documentation that are often necessary to document operating hours and equipment loading and used as a basis for the calculations (in some cases short term monitoring may be required to document the load profile)

bull Control sequence of operations that are necessary where controls play a part in the savings equation

Additional documentation other than that described in the application may be required for program participation Larger projects may also require pre- and post-project sub metering or monitoring of loads andor power input as part of another measurement and verification activity to demonstrate the actual energy savings that are realized

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 46

Baseline for Custom Analysis Where equipment is replaced prior to the end of its rated service life in order to achieve energy savings the existing equipment performance may be used as the baseline in the energy savings calculations Where equipment is replaced due to failure or for other reasons (such as obsolescence or a need for more capacity) the baseline performance used in the savings calculation should be either the minimum performance that would be required by code for that equipment type and application (where a code applies) or the performance of the equipment that would have been selected as the customers standard practice when a code does not apply

Baseline or Existing System Summary On custom worksheet on application form include make model number name plate information (such as operating voltage and rated full load amps) rated capacity quantities equipment condition and age facility operating hours equipment operating schedule and load curves If needed attach separate sheets

All decisions regarding incentives for custom projects are in the sole discretion of PECO

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 47

APPENDIX PROGRAM UPDATES SUMMARY (Q1 2017) Multifamily Nursing Home and Assisted Living retrofit customers need to apply for incentives through the PECO Smart Ideas Multi-Family Program administered by Franklin Energy For more information please contact Taylor Adler at tadlerfranklinenergycom or call 1-844-4BIZ-SAVE Multifamily Nursing Home and Assisted Living new construction customers can proceed with applying for incentives here

Revised Incentives

Data Centers

Measure Incentive Effective Immediately Previous Incentive

Air-cooled chiller for data centers $40ton $10ton Air-cooled chiller without condenser for data centers $20ton $10ton

Computer room air conditioner $30ton $7ton Water-cooled centrifugal chiller for data centers $30ton $5ton Water-cooled positive displacement or reciprocating chiller for data centers

$30ton $5ton

Uninterruptible power supply 20-100 kVA $10kVA $6kVA Uninterruptible power supply gt100 kVA $10kVA $1kVA Mainframe refresh $20kW installed $5kW installed Server refresh $20kW installed $4kW installed Server virtualization $400kW reduction $4kW reduction Thin clients $5units $4units

Lighting (Effective Immediately)

Measure Incentive Effective Immediately Specification Previous

Incentive Specification

New construction exterior LED outdoor flood light LED parking garage and canopy lighting LED polearm mounted parking and roadway lighting LED wall mount fixture

$005kWh (custom)

Lighting Power Density (LPD) Requirements Unchanged

$10-54 fixture

Lighting Power Density (LPD) (Wft2) by Space Type or Building Area

LED Replacement Lamps (Tubes) 2

$250lamp 5 Min Watts Reduced

$250lamp 6 Min Watts Reduced

LED Replacement Lamps (Tubes) 4

$400lamp 10 Min Watts Reduced

$400lamp 12 Min Watts Reduced

Permanent Fixture Removal $010Watt removed

Clarification of calculation to represent actual Wattage removed

$010Watt removed

Lighting (Effective 6117)

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 48

Measure Incentive Effective 6117 Specification Previous

Incentive Previous Specification

Interior LED high-bay fixtures andor retrofit kits if lt 20000 LED Lumens

$50fixture 150 Min Watts Reduced

$75fixture 150 Min Watts Reduced

Interior LED high-bay fixtures andor retrofit kits if gt 20000 LED Lumens

$75fixture 225 Min Watts Reduced

$75fixture 150 Min Watts Reduced

New Incentives

Compressed Air

Measure New Incentive Effective Immediately Variable speed air compressor $30compressor HP Compressed air system optimization $50compressor HP

HVAC

Measure New Incentive Effective Immediately ECM circulation pump $50pump Retro-commissioning cooling systems $750ton Retro-commissioning whole building $010square foot Energy management system $25ton Demand controlled ventilation $25ton Water-cooled air conditioner $22ton

Food Service

Measure New Incentive Effective Immediately Combination oven $200unit ENERGY STARreg commercial convection oven $150unit ENERGY STARreg commercial fryers $100unit ENERGY STARreg commercial hot holding cabinet $200unit

Refrigeration

Measure New Incentive Effective Immediately Air-cooled refrigeration condenser $10ton Oversized condenser with VFD $10ton Case light occupancy controls $750door

Lighting

Measure New Incentive Effective Immediately Interior central lighting controls $00175sq foot

Motors and Drives

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 49

-

Measure New Incentive Effective Immediately VFD for dust collection system motor $50HP

Application Clarifications and Revised Requirements

Clarification of LED Eligibility for New Construction or Retrofit Projects

LED Eligibility is determined by whether lighting products are listed in either the DesignLights Consortium (DLC) Qualified Products List of commercial-grade LED luminaires or the US Environmental Protection Agency database of ENERGY STAR certified products For products not yet listed contractors may submit LM79 and LM80 test reports PECO Smart Ideas engineers will review test reports to determine if the product in question meets performance specifications

Revised W 9 Requirement

W-9 forms EIN numbers are no longer required

Deletion of erroneous statement in New Construction Lighting

The following statement from previous Business Manual has been deleted ldquoThe minimum lighting power density used to calculate the incentive shall be no lower than 50 of the ASHRAE 901-2007 valuerdquo

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 50

  • Commercial amp Industrial Program Application Manual
    • Follow This Easy Process
      • Pre-Approval Application Checklist
      • Final Application Checklist
          • Terms and Conditions
            • Program Effective Dates
            • Program and Project Eligibility
            • Incentive Payment Limits
            • Application Review Process
            • Inspections andor PUCrsquos Statewide Program Evaluation
            • Requirements for Custom Project Electricity Savings Calculation
            • Tax Liability
            • No Endorsement
            • Warranties
            • Limitation of Liability
            • Assignment
            • Customerrsquos Certification
            • Termination
            • Acknowledgement
              • Retrofit Lighting Solutions
                • General Linear Fluorescent Lamp and Ballast Specification Requirements
                • LED Lamps and Fixtures
                • Minimum Watts Reduced
                • Linear LED (Tubes)
                • Permanent Fixture Removal
                  • LED Traffic Signals
                    • LED Traffic Signals Incentive Table
                      • New Construction Lighting Specifications
                        • New Construction Lighting Incentives Table
                          • New Construction Lighting Power Density Code
                              • Exterior New Construction Lighting
                              • HVAC Equipment
                                • Air-Source Air Conditioners and Air-Source Heat Pumps
                                • Package Terminal Systems (Replacements)
                                • Ductless Mini-Split Heat Pump lt54 Tons
                                • Geothermal Heat Pump
                                  • Other HVAC Equipment
                                    • Hotel Guest Room Occupancy Sensor
                                    • ECM Circulation Fan
                                    • ECM Circulation Pump
                                    • Retrocomissioning Cooling Systems
                                    • Retrocomissioning Whole Building
                                    • Energy Management System
                                    • Demand Controlled Ventilation
                                    • Other HVAC Incentives Table
                                      • Unitary HVAC Chillers
                                        • Air-Cooled Chillers Water Cooled Positive Displacement Reciprocating Chillers and Water Cooled Centrifugal Chillers
                                          • Refrigeration
                                            • Anti-Sweat Heater Controls
                                            • Evaporator Fan Controls
                                            • Floating Head Pressure Controls
                                            • Automatic Door Closers for Walk-In Coolers and Freezers
                                            • EC Motor for Walk-inReach-in Refrigerated cases or Freezer cases
                                            • ENERGY STAR Solid Door Freezer and Glass Door Freezer and Refrigerators
                                            • Refrigeration Suction Pipe Insulation
                                            • Night Cover
                                            • Strip Curtain on Walk-In CoolerFreezer
                                            • Evaporator Coil Defrost Control
                                            • Variable Speed Refrigeration Compressor
                                            • Add Doors to Open Refrigerated Cases
                                            • Door Gaskets
                                            • Zero Energy Doors
                                            • Air Cooled Refrigeration Condenser
                                            • Oversized Condenser with VFD
                                            • Case Light Occupancy Controls
                                            • LED Open Case Lighting
                                            • LED Enclosed Case Lighting Refrigerated
                                            • LED Enclosed Case Lighting Freezer
                                              • Food Service
                                                • Beverage and Snack Machine Controls
                                                • ENERGY STARreg Refrigerated Beverage Vending Machines
                                                • ENERGY STARreg Electric Steam Cooker
                                                • ENERGY STARreg Electric Combination Oven
                                                • ENERGY STARreg Commercial Convection Oven
                                                • ENERGY STARreg Commercial Fryers
                                                • ENERGY STARreg Commercial Hot Holding Cabinet
                                                  • Motors and Variable Frequency Drives
                                                    • Early Replacement Motors
                                                    • Variable Frequency Drives on HVAC Fan Applications
                                                    • Variable Frequency Drives on Pump Applications
                                                    • Variable Speed Control for Kitchen Exhaust Hoods
                                                    • Variable Speed Drives for Process or Other Equipment
                                                      • Domestic Hot Water
                                                        • Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater
                                                        • Heat Pump Water Heater
                                                        • Low Flow Pre-Rinse Spray Valve
                                                        • Domestic Hot Water Incentive Table
                                                          • Compressed Air Systems
                                                            • No-loss Condensate Drain
                                                            • Air-Entraining air nozzle
                                                            • Storage Tanks for LoadNo Load Screw Compressors
                                                            • Cycling Refrigerated Thermal Mass Dryer
                                                            • Variable Speed Air Compressor
                                                            • Compressed Air System Optimization
                                                            • Compressed Air Systems Incentive Table
                                                              • Data Centers
                                                                • Air Cooled Chiller
                                                                • Air Cooled Chiller without Condenser
                                                                • Computer Room Air Conditioner
                                                                • Computer Room Air Handler Variable Speed
                                                                  • Replacing constant speed CRAH with VSD CRAH
                                                                    • Water Cooled Centrifugal Chiller
                                                                    • Water Cooled Positive Displacement or Reciprocating Chiller
                                                                    • Uninterruptible Power Supply
                                                                    • Mainframe Refresh
                                                                    • Server Refresh
                                                                      • Whole Building Systems
                                                                        • Whole Building Systems Approach
                                                                        • How to Apply for Whole Building Systems Incentives
                                                                        • Customer Eligibility
                                                                        • Project Eligibility
                                                                        • Whole Building Systems Incentives Table
                                                                          • Custom Project Specifications
                                                                            • Instructions for Energy Savings Calculations for Custom Projects
                                                                            • Equipment Information Submittals
                                                                            • Energy Savings Calculations
                                                                            • Baseline for Custom Analysis
                                                                            • Baseline or Existing System Summary

Custom Project Specifications Instructions for Energy Savings Calculations for Custom Projects Custom projects must involve measures that result in a reduction in electric energy use (kWh) Electricity savings may result from either efficiency improvements or fuel switching Custom Incentives are based on the first year kilowatt-hour savings Custom applications must be accompanied by detailed engineering calculations that document the annual total energy savings

The following serve as guidelines for the minimum required documentation

Equipment Information Submittals bull A list of the present and proposed equipment and components to be installed

including manufacturerrsquos catalogmodel number bull Manufacturerrsquos specification sheets showing capacities and performance for all major

components

Energy Savings Calculations Provide calculations documenting the predicted energy consumption of the existing (or baseline) and proposed system using appropriate analytical tools and clearly stated assumptions Calculations may be performed by ldquohandrdquo but spreadsheet analysis or more rigorous modeling is preferred All analysis should be provided in electronic format All assumptions such as operating hours existing and proposed equipment operational details must be presented Engineering algorithms and procedures from recognized technical organizations such as ASHRAE SMACNA ANSI etc must be used Use rated performance factors tested under accepted procedures specified by recognized rating agencies such as AHRI ANSI ASTM etc Provide an explanation when equipment performance rating conditions vary from standard conditions

In support of the calculations extensive documentation must be provided that provides the basis for the savings estimates The documentation must provide information on the equipment operating schedule daily and seasonal load profile and baseline AND energy efficient equipment performance at the operating loads Typical documentation for custom projects often includes bull Engineering or architectural drawings and ldquoequipment schedulerdquo sheets bull Component specification sheets that include part load efficiency or performance

factors bull Spreadsheet calculations or inputoutput files and results from system modeling or

other engineering analysis using accepted engineering algorithms and practices bull Log sheets trend logs from a building management system or other operating

documentation that are often necessary to document operating hours and equipment loading and used as a basis for the calculations (in some cases short term monitoring may be required to document the load profile)

bull Control sequence of operations that are necessary where controls play a part in the savings equation

Additional documentation other than that described in the application may be required for program participation Larger projects may also require pre- and post-project sub metering or monitoring of loads andor power input as part of another measurement and verification activity to demonstrate the actual energy savings that are realized

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 46

Baseline for Custom Analysis Where equipment is replaced prior to the end of its rated service life in order to achieve energy savings the existing equipment performance may be used as the baseline in the energy savings calculations Where equipment is replaced due to failure or for other reasons (such as obsolescence or a need for more capacity) the baseline performance used in the savings calculation should be either the minimum performance that would be required by code for that equipment type and application (where a code applies) or the performance of the equipment that would have been selected as the customers standard practice when a code does not apply

Baseline or Existing System Summary On custom worksheet on application form include make model number name plate information (such as operating voltage and rated full load amps) rated capacity quantities equipment condition and age facility operating hours equipment operating schedule and load curves If needed attach separate sheets

All decisions regarding incentives for custom projects are in the sole discretion of PECO

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 47

APPENDIX PROGRAM UPDATES SUMMARY (Q1 2017) Multifamily Nursing Home and Assisted Living retrofit customers need to apply for incentives through the PECO Smart Ideas Multi-Family Program administered by Franklin Energy For more information please contact Taylor Adler at tadlerfranklinenergycom or call 1-844-4BIZ-SAVE Multifamily Nursing Home and Assisted Living new construction customers can proceed with applying for incentives here

Revised Incentives

Data Centers

Measure Incentive Effective Immediately Previous Incentive

Air-cooled chiller for data centers $40ton $10ton Air-cooled chiller without condenser for data centers $20ton $10ton

Computer room air conditioner $30ton $7ton Water-cooled centrifugal chiller for data centers $30ton $5ton Water-cooled positive displacement or reciprocating chiller for data centers

$30ton $5ton

Uninterruptible power supply 20-100 kVA $10kVA $6kVA Uninterruptible power supply gt100 kVA $10kVA $1kVA Mainframe refresh $20kW installed $5kW installed Server refresh $20kW installed $4kW installed Server virtualization $400kW reduction $4kW reduction Thin clients $5units $4units

Lighting (Effective Immediately)

Measure Incentive Effective Immediately Specification Previous

Incentive Specification

New construction exterior LED outdoor flood light LED parking garage and canopy lighting LED polearm mounted parking and roadway lighting LED wall mount fixture

$005kWh (custom)

Lighting Power Density (LPD) Requirements Unchanged

$10-54 fixture

Lighting Power Density (LPD) (Wft2) by Space Type or Building Area

LED Replacement Lamps (Tubes) 2

$250lamp 5 Min Watts Reduced

$250lamp 6 Min Watts Reduced

LED Replacement Lamps (Tubes) 4

$400lamp 10 Min Watts Reduced

$400lamp 12 Min Watts Reduced

Permanent Fixture Removal $010Watt removed

Clarification of calculation to represent actual Wattage removed

$010Watt removed

Lighting (Effective 6117)

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 48

Measure Incentive Effective 6117 Specification Previous

Incentive Previous Specification

Interior LED high-bay fixtures andor retrofit kits if lt 20000 LED Lumens

$50fixture 150 Min Watts Reduced

$75fixture 150 Min Watts Reduced

Interior LED high-bay fixtures andor retrofit kits if gt 20000 LED Lumens

$75fixture 225 Min Watts Reduced

$75fixture 150 Min Watts Reduced

New Incentives

Compressed Air

Measure New Incentive Effective Immediately Variable speed air compressor $30compressor HP Compressed air system optimization $50compressor HP

HVAC

Measure New Incentive Effective Immediately ECM circulation pump $50pump Retro-commissioning cooling systems $750ton Retro-commissioning whole building $010square foot Energy management system $25ton Demand controlled ventilation $25ton Water-cooled air conditioner $22ton

Food Service

Measure New Incentive Effective Immediately Combination oven $200unit ENERGY STARreg commercial convection oven $150unit ENERGY STARreg commercial fryers $100unit ENERGY STARreg commercial hot holding cabinet $200unit

Refrigeration

Measure New Incentive Effective Immediately Air-cooled refrigeration condenser $10ton Oversized condenser with VFD $10ton Case light occupancy controls $750door

Lighting

Measure New Incentive Effective Immediately Interior central lighting controls $00175sq foot

Motors and Drives

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 49

-

Measure New Incentive Effective Immediately VFD for dust collection system motor $50HP

Application Clarifications and Revised Requirements

Clarification of LED Eligibility for New Construction or Retrofit Projects

LED Eligibility is determined by whether lighting products are listed in either the DesignLights Consortium (DLC) Qualified Products List of commercial-grade LED luminaires or the US Environmental Protection Agency database of ENERGY STAR certified products For products not yet listed contractors may submit LM79 and LM80 test reports PECO Smart Ideas engineers will review test reports to determine if the product in question meets performance specifications

Revised W 9 Requirement

W-9 forms EIN numbers are no longer required

Deletion of erroneous statement in New Construction Lighting

The following statement from previous Business Manual has been deleted ldquoThe minimum lighting power density used to calculate the incentive shall be no lower than 50 of the ASHRAE 901-2007 valuerdquo

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 50

  • Commercial amp Industrial Program Application Manual
    • Follow This Easy Process
      • Pre-Approval Application Checklist
      • Final Application Checklist
          • Terms and Conditions
            • Program Effective Dates
            • Program and Project Eligibility
            • Incentive Payment Limits
            • Application Review Process
            • Inspections andor PUCrsquos Statewide Program Evaluation
            • Requirements for Custom Project Electricity Savings Calculation
            • Tax Liability
            • No Endorsement
            • Warranties
            • Limitation of Liability
            • Assignment
            • Customerrsquos Certification
            • Termination
            • Acknowledgement
              • Retrofit Lighting Solutions
                • General Linear Fluorescent Lamp and Ballast Specification Requirements
                • LED Lamps and Fixtures
                • Minimum Watts Reduced
                • Linear LED (Tubes)
                • Permanent Fixture Removal
                  • LED Traffic Signals
                    • LED Traffic Signals Incentive Table
                      • New Construction Lighting Specifications
                        • New Construction Lighting Incentives Table
                          • New Construction Lighting Power Density Code
                              • Exterior New Construction Lighting
                              • HVAC Equipment
                                • Air-Source Air Conditioners and Air-Source Heat Pumps
                                • Package Terminal Systems (Replacements)
                                • Ductless Mini-Split Heat Pump lt54 Tons
                                • Geothermal Heat Pump
                                  • Other HVAC Equipment
                                    • Hotel Guest Room Occupancy Sensor
                                    • ECM Circulation Fan
                                    • ECM Circulation Pump
                                    • Retrocomissioning Cooling Systems
                                    • Retrocomissioning Whole Building
                                    • Energy Management System
                                    • Demand Controlled Ventilation
                                    • Other HVAC Incentives Table
                                      • Unitary HVAC Chillers
                                        • Air-Cooled Chillers Water Cooled Positive Displacement Reciprocating Chillers and Water Cooled Centrifugal Chillers
                                          • Refrigeration
                                            • Anti-Sweat Heater Controls
                                            • Evaporator Fan Controls
                                            • Floating Head Pressure Controls
                                            • Automatic Door Closers for Walk-In Coolers and Freezers
                                            • EC Motor for Walk-inReach-in Refrigerated cases or Freezer cases
                                            • ENERGY STAR Solid Door Freezer and Glass Door Freezer and Refrigerators
                                            • Refrigeration Suction Pipe Insulation
                                            • Night Cover
                                            • Strip Curtain on Walk-In CoolerFreezer
                                            • Evaporator Coil Defrost Control
                                            • Variable Speed Refrigeration Compressor
                                            • Add Doors to Open Refrigerated Cases
                                            • Door Gaskets
                                            • Zero Energy Doors
                                            • Air Cooled Refrigeration Condenser
                                            • Oversized Condenser with VFD
                                            • Case Light Occupancy Controls
                                            • LED Open Case Lighting
                                            • LED Enclosed Case Lighting Refrigerated
                                            • LED Enclosed Case Lighting Freezer
                                              • Food Service
                                                • Beverage and Snack Machine Controls
                                                • ENERGY STARreg Refrigerated Beverage Vending Machines
                                                • ENERGY STARreg Electric Steam Cooker
                                                • ENERGY STARreg Electric Combination Oven
                                                • ENERGY STARreg Commercial Convection Oven
                                                • ENERGY STARreg Commercial Fryers
                                                • ENERGY STARreg Commercial Hot Holding Cabinet
                                                  • Motors and Variable Frequency Drives
                                                    • Early Replacement Motors
                                                    • Variable Frequency Drives on HVAC Fan Applications
                                                    • Variable Frequency Drives on Pump Applications
                                                    • Variable Speed Control for Kitchen Exhaust Hoods
                                                    • Variable Speed Drives for Process or Other Equipment
                                                      • Domestic Hot Water
                                                        • Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater
                                                        • Heat Pump Water Heater
                                                        • Low Flow Pre-Rinse Spray Valve
                                                        • Domestic Hot Water Incentive Table
                                                          • Compressed Air Systems
                                                            • No-loss Condensate Drain
                                                            • Air-Entraining air nozzle
                                                            • Storage Tanks for LoadNo Load Screw Compressors
                                                            • Cycling Refrigerated Thermal Mass Dryer
                                                            • Variable Speed Air Compressor
                                                            • Compressed Air System Optimization
                                                            • Compressed Air Systems Incentive Table
                                                              • Data Centers
                                                                • Air Cooled Chiller
                                                                • Air Cooled Chiller without Condenser
                                                                • Computer Room Air Conditioner
                                                                • Computer Room Air Handler Variable Speed
                                                                  • Replacing constant speed CRAH with VSD CRAH
                                                                    • Water Cooled Centrifugal Chiller
                                                                    • Water Cooled Positive Displacement or Reciprocating Chiller
                                                                    • Uninterruptible Power Supply
                                                                    • Mainframe Refresh
                                                                    • Server Refresh
                                                                      • Whole Building Systems
                                                                        • Whole Building Systems Approach
                                                                        • How to Apply for Whole Building Systems Incentives
                                                                        • Customer Eligibility
                                                                        • Project Eligibility
                                                                        • Whole Building Systems Incentives Table
                                                                          • Custom Project Specifications
                                                                            • Instructions for Energy Savings Calculations for Custom Projects
                                                                            • Equipment Information Submittals
                                                                            • Energy Savings Calculations
                                                                            • Baseline for Custom Analysis
                                                                            • Baseline or Existing System Summary

Baseline for Custom Analysis Where equipment is replaced prior to the end of its rated service life in order to achieve energy savings the existing equipment performance may be used as the baseline in the energy savings calculations Where equipment is replaced due to failure or for other reasons (such as obsolescence or a need for more capacity) the baseline performance used in the savings calculation should be either the minimum performance that would be required by code for that equipment type and application (where a code applies) or the performance of the equipment that would have been selected as the customers standard practice when a code does not apply

Baseline or Existing System Summary On custom worksheet on application form include make model number name plate information (such as operating voltage and rated full load amps) rated capacity quantities equipment condition and age facility operating hours equipment operating schedule and load curves If needed attach separate sheets

All decisions regarding incentives for custom projects are in the sole discretion of PECO

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 47

APPENDIX PROGRAM UPDATES SUMMARY (Q1 2017) Multifamily Nursing Home and Assisted Living retrofit customers need to apply for incentives through the PECO Smart Ideas Multi-Family Program administered by Franklin Energy For more information please contact Taylor Adler at tadlerfranklinenergycom or call 1-844-4BIZ-SAVE Multifamily Nursing Home and Assisted Living new construction customers can proceed with applying for incentives here

Revised Incentives

Data Centers

Measure Incentive Effective Immediately Previous Incentive

Air-cooled chiller for data centers $40ton $10ton Air-cooled chiller without condenser for data centers $20ton $10ton

Computer room air conditioner $30ton $7ton Water-cooled centrifugal chiller for data centers $30ton $5ton Water-cooled positive displacement or reciprocating chiller for data centers

$30ton $5ton

Uninterruptible power supply 20-100 kVA $10kVA $6kVA Uninterruptible power supply gt100 kVA $10kVA $1kVA Mainframe refresh $20kW installed $5kW installed Server refresh $20kW installed $4kW installed Server virtualization $400kW reduction $4kW reduction Thin clients $5units $4units

Lighting (Effective Immediately)

Measure Incentive Effective Immediately Specification Previous

Incentive Specification

New construction exterior LED outdoor flood light LED parking garage and canopy lighting LED polearm mounted parking and roadway lighting LED wall mount fixture

$005kWh (custom)

Lighting Power Density (LPD) Requirements Unchanged

$10-54 fixture

Lighting Power Density (LPD) (Wft2) by Space Type or Building Area

LED Replacement Lamps (Tubes) 2

$250lamp 5 Min Watts Reduced

$250lamp 6 Min Watts Reduced

LED Replacement Lamps (Tubes) 4

$400lamp 10 Min Watts Reduced

$400lamp 12 Min Watts Reduced

Permanent Fixture Removal $010Watt removed

Clarification of calculation to represent actual Wattage removed

$010Watt removed

Lighting (Effective 6117)

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 48

Measure Incentive Effective 6117 Specification Previous

Incentive Previous Specification

Interior LED high-bay fixtures andor retrofit kits if lt 20000 LED Lumens

$50fixture 150 Min Watts Reduced

$75fixture 150 Min Watts Reduced

Interior LED high-bay fixtures andor retrofit kits if gt 20000 LED Lumens

$75fixture 225 Min Watts Reduced

$75fixture 150 Min Watts Reduced

New Incentives

Compressed Air

Measure New Incentive Effective Immediately Variable speed air compressor $30compressor HP Compressed air system optimization $50compressor HP

HVAC

Measure New Incentive Effective Immediately ECM circulation pump $50pump Retro-commissioning cooling systems $750ton Retro-commissioning whole building $010square foot Energy management system $25ton Demand controlled ventilation $25ton Water-cooled air conditioner $22ton

Food Service

Measure New Incentive Effective Immediately Combination oven $200unit ENERGY STARreg commercial convection oven $150unit ENERGY STARreg commercial fryers $100unit ENERGY STARreg commercial hot holding cabinet $200unit

Refrigeration

Measure New Incentive Effective Immediately Air-cooled refrigeration condenser $10ton Oversized condenser with VFD $10ton Case light occupancy controls $750door

Lighting

Measure New Incentive Effective Immediately Interior central lighting controls $00175sq foot

Motors and Drives

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 49

-

Measure New Incentive Effective Immediately VFD for dust collection system motor $50HP

Application Clarifications and Revised Requirements

Clarification of LED Eligibility for New Construction or Retrofit Projects

LED Eligibility is determined by whether lighting products are listed in either the DesignLights Consortium (DLC) Qualified Products List of commercial-grade LED luminaires or the US Environmental Protection Agency database of ENERGY STAR certified products For products not yet listed contractors may submit LM79 and LM80 test reports PECO Smart Ideas engineers will review test reports to determine if the product in question meets performance specifications

Revised W 9 Requirement

W-9 forms EIN numbers are no longer required

Deletion of erroneous statement in New Construction Lighting

The following statement from previous Business Manual has been deleted ldquoThe minimum lighting power density used to calculate the incentive shall be no lower than 50 of the ASHRAE 901-2007 valuerdquo

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 50

  • Commercial amp Industrial Program Application Manual
    • Follow This Easy Process
      • Pre-Approval Application Checklist
      • Final Application Checklist
          • Terms and Conditions
            • Program Effective Dates
            • Program and Project Eligibility
            • Incentive Payment Limits
            • Application Review Process
            • Inspections andor PUCrsquos Statewide Program Evaluation
            • Requirements for Custom Project Electricity Savings Calculation
            • Tax Liability
            • No Endorsement
            • Warranties
            • Limitation of Liability
            • Assignment
            • Customerrsquos Certification
            • Termination
            • Acknowledgement
              • Retrofit Lighting Solutions
                • General Linear Fluorescent Lamp and Ballast Specification Requirements
                • LED Lamps and Fixtures
                • Minimum Watts Reduced
                • Linear LED (Tubes)
                • Permanent Fixture Removal
                  • LED Traffic Signals
                    • LED Traffic Signals Incentive Table
                      • New Construction Lighting Specifications
                        • New Construction Lighting Incentives Table
                          • New Construction Lighting Power Density Code
                              • Exterior New Construction Lighting
                              • HVAC Equipment
                                • Air-Source Air Conditioners and Air-Source Heat Pumps
                                • Package Terminal Systems (Replacements)
                                • Ductless Mini-Split Heat Pump lt54 Tons
                                • Geothermal Heat Pump
                                  • Other HVAC Equipment
                                    • Hotel Guest Room Occupancy Sensor
                                    • ECM Circulation Fan
                                    • ECM Circulation Pump
                                    • Retrocomissioning Cooling Systems
                                    • Retrocomissioning Whole Building
                                    • Energy Management System
                                    • Demand Controlled Ventilation
                                    • Other HVAC Incentives Table
                                      • Unitary HVAC Chillers
                                        • Air-Cooled Chillers Water Cooled Positive Displacement Reciprocating Chillers and Water Cooled Centrifugal Chillers
                                          • Refrigeration
                                            • Anti-Sweat Heater Controls
                                            • Evaporator Fan Controls
                                            • Floating Head Pressure Controls
                                            • Automatic Door Closers for Walk-In Coolers and Freezers
                                            • EC Motor for Walk-inReach-in Refrigerated cases or Freezer cases
                                            • ENERGY STAR Solid Door Freezer and Glass Door Freezer and Refrigerators
                                            • Refrigeration Suction Pipe Insulation
                                            • Night Cover
                                            • Strip Curtain on Walk-In CoolerFreezer
                                            • Evaporator Coil Defrost Control
                                            • Variable Speed Refrigeration Compressor
                                            • Add Doors to Open Refrigerated Cases
                                            • Door Gaskets
                                            • Zero Energy Doors
                                            • Air Cooled Refrigeration Condenser
                                            • Oversized Condenser with VFD
                                            • Case Light Occupancy Controls
                                            • LED Open Case Lighting
                                            • LED Enclosed Case Lighting Refrigerated
                                            • LED Enclosed Case Lighting Freezer
                                              • Food Service
                                                • Beverage and Snack Machine Controls
                                                • ENERGY STARreg Refrigerated Beverage Vending Machines
                                                • ENERGY STARreg Electric Steam Cooker
                                                • ENERGY STARreg Electric Combination Oven
                                                • ENERGY STARreg Commercial Convection Oven
                                                • ENERGY STARreg Commercial Fryers
                                                • ENERGY STARreg Commercial Hot Holding Cabinet
                                                  • Motors and Variable Frequency Drives
                                                    • Early Replacement Motors
                                                    • Variable Frequency Drives on HVAC Fan Applications
                                                    • Variable Frequency Drives on Pump Applications
                                                    • Variable Speed Control for Kitchen Exhaust Hoods
                                                    • Variable Speed Drives for Process or Other Equipment
                                                      • Domestic Hot Water
                                                        • Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater
                                                        • Heat Pump Water Heater
                                                        • Low Flow Pre-Rinse Spray Valve
                                                        • Domestic Hot Water Incentive Table
                                                          • Compressed Air Systems
                                                            • No-loss Condensate Drain
                                                            • Air-Entraining air nozzle
                                                            • Storage Tanks for LoadNo Load Screw Compressors
                                                            • Cycling Refrigerated Thermal Mass Dryer
                                                            • Variable Speed Air Compressor
                                                            • Compressed Air System Optimization
                                                            • Compressed Air Systems Incentive Table
                                                              • Data Centers
                                                                • Air Cooled Chiller
                                                                • Air Cooled Chiller without Condenser
                                                                • Computer Room Air Conditioner
                                                                • Computer Room Air Handler Variable Speed
                                                                  • Replacing constant speed CRAH with VSD CRAH
                                                                    • Water Cooled Centrifugal Chiller
                                                                    • Water Cooled Positive Displacement or Reciprocating Chiller
                                                                    • Uninterruptible Power Supply
                                                                    • Mainframe Refresh
                                                                    • Server Refresh
                                                                      • Whole Building Systems
                                                                        • Whole Building Systems Approach
                                                                        • How to Apply for Whole Building Systems Incentives
                                                                        • Customer Eligibility
                                                                        • Project Eligibility
                                                                        • Whole Building Systems Incentives Table
                                                                          • Custom Project Specifications
                                                                            • Instructions for Energy Savings Calculations for Custom Projects
                                                                            • Equipment Information Submittals
                                                                            • Energy Savings Calculations
                                                                            • Baseline for Custom Analysis
                                                                            • Baseline or Existing System Summary

APPENDIX PROGRAM UPDATES SUMMARY (Q1 2017) Multifamily Nursing Home and Assisted Living retrofit customers need to apply for incentives through the PECO Smart Ideas Multi-Family Program administered by Franklin Energy For more information please contact Taylor Adler at tadlerfranklinenergycom or call 1-844-4BIZ-SAVE Multifamily Nursing Home and Assisted Living new construction customers can proceed with applying for incentives here

Revised Incentives

Data Centers

Measure Incentive Effective Immediately Previous Incentive

Air-cooled chiller for data centers $40ton $10ton Air-cooled chiller without condenser for data centers $20ton $10ton

Computer room air conditioner $30ton $7ton Water-cooled centrifugal chiller for data centers $30ton $5ton Water-cooled positive displacement or reciprocating chiller for data centers

$30ton $5ton

Uninterruptible power supply 20-100 kVA $10kVA $6kVA Uninterruptible power supply gt100 kVA $10kVA $1kVA Mainframe refresh $20kW installed $5kW installed Server refresh $20kW installed $4kW installed Server virtualization $400kW reduction $4kW reduction Thin clients $5units $4units

Lighting (Effective Immediately)

Measure Incentive Effective Immediately Specification Previous

Incentive Specification

New construction exterior LED outdoor flood light LED parking garage and canopy lighting LED polearm mounted parking and roadway lighting LED wall mount fixture

$005kWh (custom)

Lighting Power Density (LPD) Requirements Unchanged

$10-54 fixture

Lighting Power Density (LPD) (Wft2) by Space Type or Building Area

LED Replacement Lamps (Tubes) 2

$250lamp 5 Min Watts Reduced

$250lamp 6 Min Watts Reduced

LED Replacement Lamps (Tubes) 4

$400lamp 10 Min Watts Reduced

$400lamp 12 Min Watts Reduced

Permanent Fixture Removal $010Watt removed

Clarification of calculation to represent actual Wattage removed

$010Watt removed

Lighting (Effective 6117)

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 48

Measure Incentive Effective 6117 Specification Previous

Incentive Previous Specification

Interior LED high-bay fixtures andor retrofit kits if lt 20000 LED Lumens

$50fixture 150 Min Watts Reduced

$75fixture 150 Min Watts Reduced

Interior LED high-bay fixtures andor retrofit kits if gt 20000 LED Lumens

$75fixture 225 Min Watts Reduced

$75fixture 150 Min Watts Reduced

New Incentives

Compressed Air

Measure New Incentive Effective Immediately Variable speed air compressor $30compressor HP Compressed air system optimization $50compressor HP

HVAC

Measure New Incentive Effective Immediately ECM circulation pump $50pump Retro-commissioning cooling systems $750ton Retro-commissioning whole building $010square foot Energy management system $25ton Demand controlled ventilation $25ton Water-cooled air conditioner $22ton

Food Service

Measure New Incentive Effective Immediately Combination oven $200unit ENERGY STARreg commercial convection oven $150unit ENERGY STARreg commercial fryers $100unit ENERGY STARreg commercial hot holding cabinet $200unit

Refrigeration

Measure New Incentive Effective Immediately Air-cooled refrigeration condenser $10ton Oversized condenser with VFD $10ton Case light occupancy controls $750door

Lighting

Measure New Incentive Effective Immediately Interior central lighting controls $00175sq foot

Motors and Drives

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 49

-

Measure New Incentive Effective Immediately VFD for dust collection system motor $50HP

Application Clarifications and Revised Requirements

Clarification of LED Eligibility for New Construction or Retrofit Projects

LED Eligibility is determined by whether lighting products are listed in either the DesignLights Consortium (DLC) Qualified Products List of commercial-grade LED luminaires or the US Environmental Protection Agency database of ENERGY STAR certified products For products not yet listed contractors may submit LM79 and LM80 test reports PECO Smart Ideas engineers will review test reports to determine if the product in question meets performance specifications

Revised W 9 Requirement

W-9 forms EIN numbers are no longer required

Deletion of erroneous statement in New Construction Lighting

The following statement from previous Business Manual has been deleted ldquoThe minimum lighting power density used to calculate the incentive shall be no lower than 50 of the ASHRAE 901-2007 valuerdquo

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 50

  • Commercial amp Industrial Program Application Manual
    • Follow This Easy Process
      • Pre-Approval Application Checklist
      • Final Application Checklist
          • Terms and Conditions
            • Program Effective Dates
            • Program and Project Eligibility
            • Incentive Payment Limits
            • Application Review Process
            • Inspections andor PUCrsquos Statewide Program Evaluation
            • Requirements for Custom Project Electricity Savings Calculation
            • Tax Liability
            • No Endorsement
            • Warranties
            • Limitation of Liability
            • Assignment
            • Customerrsquos Certification
            • Termination
            • Acknowledgement
              • Retrofit Lighting Solutions
                • General Linear Fluorescent Lamp and Ballast Specification Requirements
                • LED Lamps and Fixtures
                • Minimum Watts Reduced
                • Linear LED (Tubes)
                • Permanent Fixture Removal
                  • LED Traffic Signals
                    • LED Traffic Signals Incentive Table
                      • New Construction Lighting Specifications
                        • New Construction Lighting Incentives Table
                          • New Construction Lighting Power Density Code
                              • Exterior New Construction Lighting
                              • HVAC Equipment
                                • Air-Source Air Conditioners and Air-Source Heat Pumps
                                • Package Terminal Systems (Replacements)
                                • Ductless Mini-Split Heat Pump lt54 Tons
                                • Geothermal Heat Pump
                                  • Other HVAC Equipment
                                    • Hotel Guest Room Occupancy Sensor
                                    • ECM Circulation Fan
                                    • ECM Circulation Pump
                                    • Retrocomissioning Cooling Systems
                                    • Retrocomissioning Whole Building
                                    • Energy Management System
                                    • Demand Controlled Ventilation
                                    • Other HVAC Incentives Table
                                      • Unitary HVAC Chillers
                                        • Air-Cooled Chillers Water Cooled Positive Displacement Reciprocating Chillers and Water Cooled Centrifugal Chillers
                                          • Refrigeration
                                            • Anti-Sweat Heater Controls
                                            • Evaporator Fan Controls
                                            • Floating Head Pressure Controls
                                            • Automatic Door Closers for Walk-In Coolers and Freezers
                                            • EC Motor for Walk-inReach-in Refrigerated cases or Freezer cases
                                            • ENERGY STAR Solid Door Freezer and Glass Door Freezer and Refrigerators
                                            • Refrigeration Suction Pipe Insulation
                                            • Night Cover
                                            • Strip Curtain on Walk-In CoolerFreezer
                                            • Evaporator Coil Defrost Control
                                            • Variable Speed Refrigeration Compressor
                                            • Add Doors to Open Refrigerated Cases
                                            • Door Gaskets
                                            • Zero Energy Doors
                                            • Air Cooled Refrigeration Condenser
                                            • Oversized Condenser with VFD
                                            • Case Light Occupancy Controls
                                            • LED Open Case Lighting
                                            • LED Enclosed Case Lighting Refrigerated
                                            • LED Enclosed Case Lighting Freezer
                                              • Food Service
                                                • Beverage and Snack Machine Controls
                                                • ENERGY STARreg Refrigerated Beverage Vending Machines
                                                • ENERGY STARreg Electric Steam Cooker
                                                • ENERGY STARreg Electric Combination Oven
                                                • ENERGY STARreg Commercial Convection Oven
                                                • ENERGY STARreg Commercial Fryers
                                                • ENERGY STARreg Commercial Hot Holding Cabinet
                                                  • Motors and Variable Frequency Drives
                                                    • Early Replacement Motors
                                                    • Variable Frequency Drives on HVAC Fan Applications
                                                    • Variable Frequency Drives on Pump Applications
                                                    • Variable Speed Control for Kitchen Exhaust Hoods
                                                    • Variable Speed Drives for Process or Other Equipment
                                                      • Domestic Hot Water
                                                        • Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater
                                                        • Heat Pump Water Heater
                                                        • Low Flow Pre-Rinse Spray Valve
                                                        • Domestic Hot Water Incentive Table
                                                          • Compressed Air Systems
                                                            • No-loss Condensate Drain
                                                            • Air-Entraining air nozzle
                                                            • Storage Tanks for LoadNo Load Screw Compressors
                                                            • Cycling Refrigerated Thermal Mass Dryer
                                                            • Variable Speed Air Compressor
                                                            • Compressed Air System Optimization
                                                            • Compressed Air Systems Incentive Table
                                                              • Data Centers
                                                                • Air Cooled Chiller
                                                                • Air Cooled Chiller without Condenser
                                                                • Computer Room Air Conditioner
                                                                • Computer Room Air Handler Variable Speed
                                                                  • Replacing constant speed CRAH with VSD CRAH
                                                                    • Water Cooled Centrifugal Chiller
                                                                    • Water Cooled Positive Displacement or Reciprocating Chiller
                                                                    • Uninterruptible Power Supply
                                                                    • Mainframe Refresh
                                                                    • Server Refresh
                                                                      • Whole Building Systems
                                                                        • Whole Building Systems Approach
                                                                        • How to Apply for Whole Building Systems Incentives
                                                                        • Customer Eligibility
                                                                        • Project Eligibility
                                                                        • Whole Building Systems Incentives Table
                                                                          • Custom Project Specifications
                                                                            • Instructions for Energy Savings Calculations for Custom Projects
                                                                            • Equipment Information Submittals
                                                                            • Energy Savings Calculations
                                                                            • Baseline for Custom Analysis
                                                                            • Baseline or Existing System Summary

Measure Incentive Effective 6117 Specification Previous

Incentive Previous Specification

Interior LED high-bay fixtures andor retrofit kits if lt 20000 LED Lumens

$50fixture 150 Min Watts Reduced

$75fixture 150 Min Watts Reduced

Interior LED high-bay fixtures andor retrofit kits if gt 20000 LED Lumens

$75fixture 225 Min Watts Reduced

$75fixture 150 Min Watts Reduced

New Incentives

Compressed Air

Measure New Incentive Effective Immediately Variable speed air compressor $30compressor HP Compressed air system optimization $50compressor HP

HVAC

Measure New Incentive Effective Immediately ECM circulation pump $50pump Retro-commissioning cooling systems $750ton Retro-commissioning whole building $010square foot Energy management system $25ton Demand controlled ventilation $25ton Water-cooled air conditioner $22ton

Food Service

Measure New Incentive Effective Immediately Combination oven $200unit ENERGY STARreg commercial convection oven $150unit ENERGY STARreg commercial fryers $100unit ENERGY STARreg commercial hot holding cabinet $200unit

Refrigeration

Measure New Incentive Effective Immediately Air-cooled refrigeration condenser $10ton Oversized condenser with VFD $10ton Case light occupancy controls $750door

Lighting

Measure New Incentive Effective Immediately Interior central lighting controls $00175sq foot

Motors and Drives

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 49

-

Measure New Incentive Effective Immediately VFD for dust collection system motor $50HP

Application Clarifications and Revised Requirements

Clarification of LED Eligibility for New Construction or Retrofit Projects

LED Eligibility is determined by whether lighting products are listed in either the DesignLights Consortium (DLC) Qualified Products List of commercial-grade LED luminaires or the US Environmental Protection Agency database of ENERGY STAR certified products For products not yet listed contractors may submit LM79 and LM80 test reports PECO Smart Ideas engineers will review test reports to determine if the product in question meets performance specifications

Revised W 9 Requirement

W-9 forms EIN numbers are no longer required

Deletion of erroneous statement in New Construction Lighting

The following statement from previous Business Manual has been deleted ldquoThe minimum lighting power density used to calculate the incentive shall be no lower than 50 of the ASHRAE 901-2007 valuerdquo

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 50

  • Commercial amp Industrial Program Application Manual
    • Follow This Easy Process
      • Pre-Approval Application Checklist
      • Final Application Checklist
          • Terms and Conditions
            • Program Effective Dates
            • Program and Project Eligibility
            • Incentive Payment Limits
            • Application Review Process
            • Inspections andor PUCrsquos Statewide Program Evaluation
            • Requirements for Custom Project Electricity Savings Calculation
            • Tax Liability
            • No Endorsement
            • Warranties
            • Limitation of Liability
            • Assignment
            • Customerrsquos Certification
            • Termination
            • Acknowledgement
              • Retrofit Lighting Solutions
                • General Linear Fluorescent Lamp and Ballast Specification Requirements
                • LED Lamps and Fixtures
                • Minimum Watts Reduced
                • Linear LED (Tubes)
                • Permanent Fixture Removal
                  • LED Traffic Signals
                    • LED Traffic Signals Incentive Table
                      • New Construction Lighting Specifications
                        • New Construction Lighting Incentives Table
                          • New Construction Lighting Power Density Code
                              • Exterior New Construction Lighting
                              • HVAC Equipment
                                • Air-Source Air Conditioners and Air-Source Heat Pumps
                                • Package Terminal Systems (Replacements)
                                • Ductless Mini-Split Heat Pump lt54 Tons
                                • Geothermal Heat Pump
                                  • Other HVAC Equipment
                                    • Hotel Guest Room Occupancy Sensor
                                    • ECM Circulation Fan
                                    • ECM Circulation Pump
                                    • Retrocomissioning Cooling Systems
                                    • Retrocomissioning Whole Building
                                    • Energy Management System
                                    • Demand Controlled Ventilation
                                    • Other HVAC Incentives Table
                                      • Unitary HVAC Chillers
                                        • Air-Cooled Chillers Water Cooled Positive Displacement Reciprocating Chillers and Water Cooled Centrifugal Chillers
                                          • Refrigeration
                                            • Anti-Sweat Heater Controls
                                            • Evaporator Fan Controls
                                            • Floating Head Pressure Controls
                                            • Automatic Door Closers for Walk-In Coolers and Freezers
                                            • EC Motor for Walk-inReach-in Refrigerated cases or Freezer cases
                                            • ENERGY STAR Solid Door Freezer and Glass Door Freezer and Refrigerators
                                            • Refrigeration Suction Pipe Insulation
                                            • Night Cover
                                            • Strip Curtain on Walk-In CoolerFreezer
                                            • Evaporator Coil Defrost Control
                                            • Variable Speed Refrigeration Compressor
                                            • Add Doors to Open Refrigerated Cases
                                            • Door Gaskets
                                            • Zero Energy Doors
                                            • Air Cooled Refrigeration Condenser
                                            • Oversized Condenser with VFD
                                            • Case Light Occupancy Controls
                                            • LED Open Case Lighting
                                            • LED Enclosed Case Lighting Refrigerated
                                            • LED Enclosed Case Lighting Freezer
                                              • Food Service
                                                • Beverage and Snack Machine Controls
                                                • ENERGY STARreg Refrigerated Beverage Vending Machines
                                                • ENERGY STARreg Electric Steam Cooker
                                                • ENERGY STARreg Electric Combination Oven
                                                • ENERGY STARreg Commercial Convection Oven
                                                • ENERGY STARreg Commercial Fryers
                                                • ENERGY STARreg Commercial Hot Holding Cabinet
                                                  • Motors and Variable Frequency Drives
                                                    • Early Replacement Motors
                                                    • Variable Frequency Drives on HVAC Fan Applications
                                                    • Variable Frequency Drives on Pump Applications
                                                    • Variable Speed Control for Kitchen Exhaust Hoods
                                                    • Variable Speed Drives for Process or Other Equipment
                                                      • Domestic Hot Water
                                                        • Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater
                                                        • Heat Pump Water Heater
                                                        • Low Flow Pre-Rinse Spray Valve
                                                        • Domestic Hot Water Incentive Table
                                                          • Compressed Air Systems
                                                            • No-loss Condensate Drain
                                                            • Air-Entraining air nozzle
                                                            • Storage Tanks for LoadNo Load Screw Compressors
                                                            • Cycling Refrigerated Thermal Mass Dryer
                                                            • Variable Speed Air Compressor
                                                            • Compressed Air System Optimization
                                                            • Compressed Air Systems Incentive Table
                                                              • Data Centers
                                                                • Air Cooled Chiller
                                                                • Air Cooled Chiller without Condenser
                                                                • Computer Room Air Conditioner
                                                                • Computer Room Air Handler Variable Speed
                                                                  • Replacing constant speed CRAH with VSD CRAH
                                                                    • Water Cooled Centrifugal Chiller
                                                                    • Water Cooled Positive Displacement or Reciprocating Chiller
                                                                    • Uninterruptible Power Supply
                                                                    • Mainframe Refresh
                                                                    • Server Refresh
                                                                      • Whole Building Systems
                                                                        • Whole Building Systems Approach
                                                                        • How to Apply for Whole Building Systems Incentives
                                                                        • Customer Eligibility
                                                                        • Project Eligibility
                                                                        • Whole Building Systems Incentives Table
                                                                          • Custom Project Specifications
                                                                            • Instructions for Energy Savings Calculations for Custom Projects
                                                                            • Equipment Information Submittals
                                                                            • Energy Savings Calculations
                                                                            • Baseline for Custom Analysis
                                                                            • Baseline or Existing System Summary

-

Measure New Incentive Effective Immediately VFD for dust collection system motor $50HP

Application Clarifications and Revised Requirements

Clarification of LED Eligibility for New Construction or Retrofit Projects

LED Eligibility is determined by whether lighting products are listed in either the DesignLights Consortium (DLC) Qualified Products List of commercial-grade LED luminaires or the US Environmental Protection Agency database of ENERGY STAR certified products For products not yet listed contractors may submit LM79 and LM80 test reports PECO Smart Ideas engineers will review test reports to determine if the product in question meets performance specifications

Revised W 9 Requirement

W-9 forms EIN numbers are no longer required

Deletion of erroneous statement in New Construction Lighting

The following statement from previous Business Manual has been deleted ldquoThe minimum lighting power density used to calculate the incentive shall be no lower than 50 of the ASHRAE 901-2007 valuerdquo

PECO Smart Ideas For Your Business CampI Program Application Manual Q1 2017 pg 50

  • Commercial amp Industrial Program Application Manual
    • Follow This Easy Process
      • Pre-Approval Application Checklist
      • Final Application Checklist
          • Terms and Conditions
            • Program Effective Dates
            • Program and Project Eligibility
            • Incentive Payment Limits
            • Application Review Process
            • Inspections andor PUCrsquos Statewide Program Evaluation
            • Requirements for Custom Project Electricity Savings Calculation
            • Tax Liability
            • No Endorsement
            • Warranties
            • Limitation of Liability
            • Assignment
            • Customerrsquos Certification
            • Termination
            • Acknowledgement
              • Retrofit Lighting Solutions
                • General Linear Fluorescent Lamp and Ballast Specification Requirements
                • LED Lamps and Fixtures
                • Minimum Watts Reduced
                • Linear LED (Tubes)
                • Permanent Fixture Removal
                  • LED Traffic Signals
                    • LED Traffic Signals Incentive Table
                      • New Construction Lighting Specifications
                        • New Construction Lighting Incentives Table
                          • New Construction Lighting Power Density Code
                              • Exterior New Construction Lighting
                              • HVAC Equipment
                                • Air-Source Air Conditioners and Air-Source Heat Pumps
                                • Package Terminal Systems (Replacements)
                                • Ductless Mini-Split Heat Pump lt54 Tons
                                • Geothermal Heat Pump
                                  • Other HVAC Equipment
                                    • Hotel Guest Room Occupancy Sensor
                                    • ECM Circulation Fan
                                    • ECM Circulation Pump
                                    • Retrocomissioning Cooling Systems
                                    • Retrocomissioning Whole Building
                                    • Energy Management System
                                    • Demand Controlled Ventilation
                                    • Other HVAC Incentives Table
                                      • Unitary HVAC Chillers
                                        • Air-Cooled Chillers Water Cooled Positive Displacement Reciprocating Chillers and Water Cooled Centrifugal Chillers
                                          • Refrigeration
                                            • Anti-Sweat Heater Controls
                                            • Evaporator Fan Controls
                                            • Floating Head Pressure Controls
                                            • Automatic Door Closers for Walk-In Coolers and Freezers
                                            • EC Motor for Walk-inReach-in Refrigerated cases or Freezer cases
                                            • ENERGY STAR Solid Door Freezer and Glass Door Freezer and Refrigerators
                                            • Refrigeration Suction Pipe Insulation
                                            • Night Cover
                                            • Strip Curtain on Walk-In CoolerFreezer
                                            • Evaporator Coil Defrost Control
                                            • Variable Speed Refrigeration Compressor
                                            • Add Doors to Open Refrigerated Cases
                                            • Door Gaskets
                                            • Zero Energy Doors
                                            • Air Cooled Refrigeration Condenser
                                            • Oversized Condenser with VFD
                                            • Case Light Occupancy Controls
                                            • LED Open Case Lighting
                                            • LED Enclosed Case Lighting Refrigerated
                                            • LED Enclosed Case Lighting Freezer
                                              • Food Service
                                                • Beverage and Snack Machine Controls
                                                • ENERGY STARreg Refrigerated Beverage Vending Machines
                                                • ENERGY STARreg Electric Steam Cooker
                                                • ENERGY STARreg Electric Combination Oven
                                                • ENERGY STARreg Commercial Convection Oven
                                                • ENERGY STARreg Commercial Fryers
                                                • ENERGY STARreg Commercial Hot Holding Cabinet
                                                  • Motors and Variable Frequency Drives
                                                    • Early Replacement Motors
                                                    • Variable Frequency Drives on HVAC Fan Applications
                                                    • Variable Frequency Drives on Pump Applications
                                                    • Variable Speed Control for Kitchen Exhaust Hoods
                                                    • Variable Speed Drives for Process or Other Equipment
                                                      • Domestic Hot Water
                                                        • Fuel Switch Electric Water Heater to ENERGY STAR Commercial Gas Water Heater
                                                        • Heat Pump Water Heater
                                                        • Low Flow Pre-Rinse Spray Valve
                                                        • Domestic Hot Water Incentive Table
                                                          • Compressed Air Systems
                                                            • No-loss Condensate Drain
                                                            • Air-Entraining air nozzle
                                                            • Storage Tanks for LoadNo Load Screw Compressors
                                                            • Cycling Refrigerated Thermal Mass Dryer
                                                            • Variable Speed Air Compressor
                                                            • Compressed Air System Optimization
                                                            • Compressed Air Systems Incentive Table
                                                              • Data Centers
                                                                • Air Cooled Chiller
                                                                • Air Cooled Chiller without Condenser
                                                                • Computer Room Air Conditioner
                                                                • Computer Room Air Handler Variable Speed
                                                                  • Replacing constant speed CRAH with VSD CRAH
                                                                    • Water Cooled Centrifugal Chiller
                                                                    • Water Cooled Positive Displacement or Reciprocating Chiller
                                                                    • Uninterruptible Power Supply
                                                                    • Mainframe Refresh
                                                                    • Server Refresh
                                                                      • Whole Building Systems
                                                                        • Whole Building Systems Approach
                                                                        • How to Apply for Whole Building Systems Incentives
                                                                        • Customer Eligibility
                                                                        • Project Eligibility
                                                                        • Whole Building Systems Incentives Table
                                                                          • Custom Project Specifications
                                                                            • Instructions for Energy Savings Calculations for Custom Projects
                                                                            • Equipment Information Submittals
                                                                            • Energy Savings Calculations
                                                                            • Baseline for Custom Analysis
                                                                            • Baseline or Existing System Summary