Smoke Extract Fans 2011 02 en E8038

systemair

2 I Smoke Extract Fans

Since 1974 Systemair cares for the purity of an essential resource. Today Systemair is one of the leading ventila-tion companies worldwide. A success story, which started in Skinnskatteberg, Sweden, with the invention of the inline duct fan. This invention revolutionised the venti-lation world. Since then the company has continuously advanced and now offers a comprehensive range of products for all ventilation requirements. The experts of Systemair know the conditions and see the point whatever you need - the ventilation concept of a shopping centre, domestic ventilation of a single familiy house or the ventilation of tunnels and metro stations.

Over 2500 employees in more than 60 subsidiaries and 40 countries are available for the essential proximity to the customers.

This brochure presents the wide range of our smoke extract fans used in case of fire to extract smoke gases, and also during normal working conditions for standard ventilation.

For further information about our smoke extract fans and all the other Systemair products you can contact our experts in your local Systemair company or you can just visit our online catalogue on www.systemair.com.

Green VentilationOur label Green Ventilation marks all products according to Systemairs High Energy Efficiency Classification. All of these products combine cost effectiveness and energy efficiency.

QualitySystemair has been certified according to ISO 9001, ISO 14001 and ATEX. Our R&D centre belongs to one of the most modern facilities in Europe. We test in compliance with the international standards EN, ISO and AMCA.

Systemair AB, the Systemair group head office in Skinnskatteberg, Sweden. The production is virtually fully automated with modern machinery featuring advanced computer support. Also located here is the companys most advanced test installation for measuring technical data.

Disclose the secret of fresh air!

Skinnskatteberg, Sweden

Systemair head office

The main plant in Skinnskatteberg houses one of the companys distri-bution centers, the largest production facility and is the Systemair group head office.

systemair

Smoke Extract Fans I 3

Bouctouche, CanadaManufacturing of duct fans and heat exchangers used in residential ventilation for the North American market.

Dal, Eidsvoll, NorwayProduction of air handling units for the Norwegian market.

Kansas City, USAProduction of fans for the US market.

Hssleholm, Sweden VEABVEAB is the leading European manufacturer of electric duct heaters. Production of heating and cooling coils, electric and water based.

Madrid, SpainProduction of air handling units.

Hasselager, DenmarkProduction of air handling units.

Windischbuch, GermanyHeadquarters of Systemair Germany and distribution center. Production facility for fans and modular air handling units, spe-cialized on engineered products (e.g. tunnel and jet fans).

Maribor, SloveniaSpecialized in centrifugal smoke extract fans, EN certified.

Bratislava, SlovakiaThe factory in Bratislava manufactures air distribution products and EN certified fire and smoke dampers.

Ukmerge, LithuaniaProduction of smaller air handling units with energy recovery systems.

Kuala Lumpur, MalaysiaManufacturing of products for the Asian market.


systemair

Smoke extract fans for every requirementSmoke extraction of buildings requires precise planning and customised concepts.

Systemairs comprehensive range of products offers suitable solutions for every requirement: centrifugal fans and axial fans for roof, duct or wall mounting. Performance range from 500 up to 400.000 m/h. Systemair smoke extract fans are approved for smoke extraction in case of fire as well as for everyday ventilation. Comprehensive accessories complete

the range. Systemair smoke extract fans include the following temperature classes:

F600 600C/120 min.F400 400C/120 min.F300 300C/120 min.

Typical areas of application include shopping centres, airports, industrial buildings, cinemas, theatres or similar buildings. Systemair smoke extract fans are also used during process

exhaust air with high temperatures, for parking garages and tunnel ventilation.

Tested to EN 12101-3Systemair smoke extract fans have been tested by Technical University of Munich, LGAI Barcelona or BSRIA Brachnell to ensure that it com-plies with the European product and testing standard EN 12101-3. The complete range carries the CE Mark in accordance with EN 12101-

Jet FansAxial Fans


systemair

3:2002-06; continued compliance is monitored by TV Sd. The EU Declaration of Conformity is available for you to download at www.systemair.de

Mechanical smoke extractionDuring a fire, smoke and fire gases spread through the entire building.It is therefore essential that buildings are constructed to prevent the expansion of smoke and fire in case of fire. Evacuation routes as well as

firefighting routes for the fire-services have to be kept clear of smoke. Mechanical exhaust systems reduce the risk factors in case of fire. They extract the smoke and heat from the building. In comparison with natural smoke extraction units, they work independently of external conditions and assure the full performance immediately.

Mechanical smoke extraction units are especially indispensable to the

following application areas. High ceiling rooms without win-

dows Subterranean rooms and passages Buildings which are constantly

exposed to wind Huge rooms with high fire load Rooms with sprinkler systems

Today, mechanical smoke and heat extraction systems are essential for fire prevention measures.

Wall and Duct Fans Roof Fans


systemair

Smoke Extract Centrifugal Fans

Duct Fan MUB/FF400 - 400C/120 min.

Versatile installation and assembly variants - Installation either inside or outside the fire zone without additional

insulation - Can be installed vertical or horizontal - Suitable for indoor or outdoor installation Choice of exhaust direction; it can be modified on site Backward curved impellers, manufactured from galvanized steel The casing consists of a frame, manufactured from profiled steel, 4 double

skin panels from galvanized steel and 20 mm mineral wool insulation inside There is a choice of single-speed or two-speed motors A circular connection spigot is pre-installed as standard DIBt approval has been applied for (status 02/11) Wide range of accessories Air flow up to 13.770 m/h

Wall Fan WVA / WVI F400 - 400C/120 min.F600 - 600C/120 min.

Backward curved impellers; F400 made of galvanized steel, F600 made of stainless steel, welded Casing manufactured from steel, powder coated RAL 7032 Standard IEC motor; ISO F; IP54; single-speed or two-speed version WVA for installation only outside the building, and outside the fire zone

WVI for installation inside the building and inside the fire zone DIBt approval has been applied for (status 02/11) Wide range of accessories Air flow up to 40.000 m/h


systemair

Smoke Extract Centrifugal Fans

Roof Fan DVVF400 - 400C/120 min.F600 - 600C/120 min.

Temperature of transported air up to 120C in continuous operation Backward curved impellers; F400 made of galvanized steel sheet; F600

made of stainless steel Seawater resistant aluminium casing, base plate and inlet nozzle from

galvanized steel sheet Encapsulated, insulated motor, placed outside the air flow; ISO class F;

enclosure class IP54 Motor cooling via fresh air duct Installation above heated rooms; also applicable above unheated rooms

with the use of FSL flaps (accessories) DIBt approval Z-78.11-167, Berlin Wide range of accessories Air flow up to 54.800 m/h

Roof Fan DVG-VF400 - 400C/120 min

Temperature of transported air up to 120C in continuous operation Backward curved impellers; made of galvanized steel sheet Seawater resistant aluminium casing, base plate and inlet nozzle from gal-

vanized steel sheet Encapsulated, insulated motor, placed outside air flow; ISO class F; enclo-

sure class IP54 DIBt approval Z-78.11-188, Berlin Wide range of accessories Air flow up to 17.700 m/h


systemair

Smoke Extract Axial Fans

AXC...(B) F300 - 300C/120 min.

Fan size from 315 to 1.600 mm Casing made of hot-dip galvanized steel Aerofoil impeller with adjustable pitch angle for maximum efficiency Terminal box in IP65 mounted at the outside of the casing for easy wiring Motors IP54, insulation class H, in accordance with EN 60034-5/IEC 85 DIBt approval Z-78.11-175, Berlin Wide range of accessories Air flow up to 212.000 m/h

AXC...(B)-G F300 - 300C/120 min.

Fan size from 315 to 1.600 mm Casing made of hot-dip galvanized steel Aerofoil impeller with adjustable pitch angle for maximum efficiency Terminal box in IP65 mounted at the outside of the casing for easy wiring Motors IP54, insulation class H, in accordance with EN 60034-5/IEC 85 Two fans in series for higher pressure DIBt approval Z-78.11-175, Berlin Wide range of accessories Air flow up to 212.000 m/h


systemair

AXC...(F)-GF400 - 400C/120 min.

Fan size from 315 to 1.600 mm Casing made of hot-dip galvanized steel Aerofoil impeller with adjustable pitch angle for maximum efficiency Terminal box in IP65 mounted at the outside of the casing for easy wiring Motors IP54, insulation class H, in accordance with EN 60034-5/IEC 85 Two fans in series for higher pressure DIBt approval Z-78.11-190, Berlin Wide range of accessories Air flow up to 212.000 m/h

Smoke Extract Axial Fans

AXC...(F) F400 - 400C/120 min.

Fan size from 315 to 1.600 mm Casing made of hot-dip galvanized steel Aerofoil impeller with adjustable pitch angle for maximum efficiency Terminal box in IP65 mounted at the outside of the casing for easy wiring Motors IP54, insulation class H, in accordance with EN 60034-5/IEC 85 DIBt approval Z-78.11-190, Berlin Wide range of accessories Air flow up to 212.000 m/h


systemair

Jet Fans AJR / AJ8...(B)F300 - 300C/120 min.

Fan size from 315 to 400 mm Aerofoil impeller with adjustable pitch angle for maximum efficiency Casing manufactured from galvanized sheet steel,

completely sound insulated Motors IP54, insulation class H (smoke extract); Motors IP55,

insulation class F (CO-exhaust), according to EN 60045-5/IEC 85 Terminal box for easy access at the outer fan casing, min. IP66 Fully reversible blade settings available on request Removable fan module also after installation for easy maintenance Two design versions: circular AJR and octagonal AJ8 DIBt approval Z-78.11-182, Berlin Air flow up to 7.700 m/h

Smoke Extract Jet Fans

Tunnel Jet Fans AJ...(T)F300 - 300C/120 min.

Tunnel Jet Fans AJ...(F)F400 - 400C/120 min.

Fan size from 500 to 1.600 mm Thrust performance higher than 40 N/kW Casing manufactured from galvanized or hot dip galvanized steel sheet Aerofoil impeller with adjustable pitch angle for maximum efficiency Impeller for one rotation direction or truly reversible Terminal box mounted at the outside of the casing, minimum IP65 Standard IEC motors according to IEC 34, smoke extract motors with

different temperature classes for smoke displacement Motors with frequency 50 Hz and 60 Hz available Permanently lubricated ball bearings; optional relubrication device.

Jet Fan IV 50 / IV 85F300 - 300C/120 min.

Compact casing, ideal for rooms with low ceilings Appealing design Thrust performance 50 N and 85 N Casing manufactured from galvanized steel sheet Motor execution F300 for 300C/120 min. or standard temperature Exhaust direction can be variably modified Approved inspection switch optional


systemair

Special Applications:

Wall Mounted Axial FansAXC...-P (55C)AXC...(B)-P F300 / EN 12101-3 certified, CE labelled. Monitored by TV Sd.HA...(F)-P F400 / EN 12101-3 certified, CE labelled. Monitored by TV Sd.

Square wall plate with inlet cone manufactured from steel, hot dip galvanised upon completion. With protection guard.

IEC- standard or smoke extract motors, single or two speed Terminal box supplied loose Available up to impeller diameter 1.000 mm AXC: Adjustable aluminium impellers HA: Welded steel impellers

Axial Roof Fans (exhaust and supply fans)AXC...-D (55C)AXC...(B)-D F300

Casing manufactured from steel, hot dip galvanised upon completion Delivered with roof cowl and base frame No wind or snow load testing required for this design

Axial Fan with insulated box

Double skin panels manufactured from galvanised steel Panels containing 20 mm thick high-quality mineral wool for sound and

thermal insulation Vibration-free mounted fan; mounting feet with vibration isolators and

suction and pressure sided elastic joints Reduction of approx 7 dB

AXC...-P

AXC-D

AXC-B

Syst

emai

r Gm

bH

02/

2011

/ E

8038

www.systemair.com

Documents

Smoke Extract Fans 2011 02 en E8038