Upload
lethuy
View
217
Download
0
Embed Size (px)
Citation preview
Which anchor with internal thread is crackedconcrete approved for single anchor fastening?
MechanicalAnchors
SNAKE
(EN) – SNAKE
Available range
SNAKEInternal thread self-tapping anchor,zinc plated, including setting tool anddrill bit in every box SIZES M8 to M12
SNAKE SETTING TOOLSIZES M8 to M12
SNAKE SDS-DRILL BITSIZES M8/M10: Ø12,7mmM12: Ø19,1mm
+31 (0)888-POWERS (769 377) www.powerseurope.nlCopyright © 2011 Powers Fasteners Europe. All rights reserved.
EUROPEAN TECHNICAL APPROVALETA-07/0155 - ETAG 001 - option 1
07
0679-CPD-0277
SNAKE M8 / M10
F 120
FIRERESISTANCE
POWERS
TEST LABORATO
RY
M8 max. 185 NmM10/M12 max. 468 Nm
contact
Approvals and test reports
Suitable base materials
Installation instruction
Complete grip overtotal anchor length
option 1
ETA option 1 approvalfor cracked anduncracked concrete
Up to 6 times fasterinstallation in comparisonwith drop-in anchors
Special thread forsafe installation
contact
Special setting tool forproper embedment,standard included inevery box
Removable: for temporaryfixings Snake can beremoved completely (no steel left in concrete)
Very small edgedistances approved
No hammer required,tool (impact wrenchP180) does the work
Snake: internal thread anchor with cracked concreteapproval for single anchor fastening
P180Cordless impact wrench, 18V, 3,0 Ah / Li-Ion
+31 (0)888-POWERS (769 377) www.powerseurope.nlCopyright © 2011 Powers Fasteners Europe. All rights reserved.
SNAKE: Technical data
h1
hnom
do
min
M
h
Nrec
Vrec1 kN ≈ 100kg
min
Loading data in cracked and uncracked concrete (ETA-07/0155) | uncracked concrete | cracked concrete
impact edge spacing Tension Shear Tension Shear
Type Thread size d0 hnom h1 emin wrench hmin Cmin Smin Nrec Vrec Nrec Vrec M mm mm mm mm Max Nm mm mm mm kN kN kN kN
SNAKE M8 8 12,7** 41 50 20 185 100 80 80 2,0 2,4 1,2 1,4
SNAKE M10 10 12,7** 41 50 10 468 100 80 80 2,0 2,4 1,2 1,4
SNAKE M12* 12 19,1** 54 60 24 468 120 100 100 3,5 3,5 - -
* No ETA** drill bit and setting tool included in every box
This project has chosen for Powers Snake
Ulm, Germany
SNAKE range overview
EN_BRO_SNAKE_409-1-1-1Art.Nr. 61248
Snake internal thread self-tapping anchor – zinc plated, incl. setting tool and drill bit
Type | Art. Nr. |
SNAKE M8 KIT 25440 50 500 SNAKE M10 KIT 06401 50 500 SNAKE M12 KIT 25456 50 250
Snake setting tool
Type | Art. Nr. |
SNAKE-ST-M8 25460 1 SNAKE-ST-M10 06406 1 SNAKE-ST-M12 25470 1
Snake SDS-drill bit
Type | Art. Nr. |
SNAKE-BIT-M8-M10 06408 1 SNAKE-BIT-M12 25475 1
Your Powers Dealer:
+31 (0)888-POWERS (769 377) Powers cannot be responsible for any errors and reserves the right to make technical and range modificationswithout notice. No liability is accepted for printing errors and omissions. Powers terms and conditions apply.Copyright © 2011 Powers Fasteners Europe. All rights reserved.
P180 – Impact wrench, 18V, 3.0Ah, Li-Ion
Type | Art. Nr. |
P180 IMPACT WRENCH 21620 1 18V CHARGER BASE 21622 1 18V BATTERY 21624 1 18V UK CHARGER BASE 21626 1