Upload
amw3
View
223
Download
0
Embed Size (px)
Citation preview
8/6/2019 Soap Presentation
1/29
8/14/2007 1
Who am I ?
8/6/2019 Soap Presentation
2/29
8/14/2007 2
8/6/2019 Soap Presentation
3/29
8/14/2007 3
Consumer perspectiveConsumer perceives Transparent
Soap to be milderSuperior to other soaps
High aesthetic appeal because of
transparency
Novelty
Attractive
8/6/2019 Soap Presentation
4/29
8/14/2007 4
Manufacturers perspective Difficult to Manufacture
Positioned as a premium Commands a premium price
Transparent Soaps command a price
range from USD 2 to USD 19
Immense potential for creativity
8/6/2019 Soap Presentation
5/29
8/14/2007 5
Galaxy Presents SN 900 - Theunique melt & pour transparentbathing bar series
8/6/2019 Soap Presentation
6/29
8/14/2007 6
SN 900 series the uniquenessTransparent soap has a long history dating back to1789 when the first ever transparent soap was
introducedFrom then till date conventional methods producetransparent soap from opaque soap which isdissolved in hot ethanol (grain alcohol), glycerin and
a sugar solution followed by a curing and dryingtime a total of 6 weeks for the entire process
===============================
With our SN900 series , you can make an alcohol-free transparent bathing bar in a 3- stepprocess within 4 hours
8/6/2019 Soap Presentation
7/29
8/14/2007 7
SN 900 series - the product Surfactant based transparent flakesMild formulation with the option of two variants SN937, SN930
Unmatched cost efficiency
No animal source ingredient
Superior fragrance retention at low perfume levels
Lasting Transparency
Fully Biodegradable
8/6/2019 Soap Presentation
8/29
8/14/2007 8
Charge the SN flakes in the vessel with steam jacket systemAnd stabilize the temperature at 70-75C
Stir using a hydrophil type SS stirrer to avoid foam
generation & do add 1 to 1.5% water during melting
Add color & perfume at
70C , Then pour in mold to set for 4 hrs
Cut , stamp & shrinkWrap Or paper wrap
THE SOAP
The Process of soap making ..
I
II
III
8/6/2019 Soap Presentation
9/29
8/14/2007 9
The pot with heating jacket
8/6/2019 Soap Presentation
10/29
8/14/2007 10
Take clean pot.
8/6/2019 Soap Presentation
11/29
8/14/2007 11
Start heating, take material in apot, mix gently & continue
8/6/2019 Soap Presentation
12/29
8/14/2007 12
Add more flakes, while mixing.
8/6/2019 Soap Presentation
13/29
8/14/2007 13
Add more flakes, complete the meltingwith stirring to avoid lumps.
8/6/2019 Soap Presentation
14/29
8/14/2007 14
Add perfume & color & additives ifany. Mix well & allow to stand to de-aerate
8/6/2019 Soap Presentation
15/29
8/14/2007 15
Pour the melt in to moulds.
8/6/2019 Soap Presentation
16/29
8/14/2007 16
Allow to cool & solidify - thetransparent soap block is ready
8/6/2019 Soap Presentation
17/29
8/14/2007 17
Cut the block to required size
8/6/2019 Soap Presentation
18/29
8/14/2007 18
Put the block on the stampingmachine
8/6/2019 Soap Presentation
19/29
8/14/2007 19
Stamp the block
8/6/2019 Soap Presentation
20/29
8/14/2007 20
Shrink wrap the transparent soap
8/6/2019 Soap Presentation
21/29
8/14/2007 21
Transparent soaps, ready for you
Isnt it simple?
8/6/2019 Soap Presentation
22/29
8/14/2007 22
Your queries our answers ..Is there anything like minimum batch size for the process?
You could start off with a lab batch of 1 kg or a commercial
batch of up to tons based on your vessel size , our standardminimum order pack is 30kg
What type of reactor vessel & stirrer do I need to use for
making soap from Galaxys soap flakes?Both vessel & stirrer should be of SS. The stirrer should besuch that no foam is generated & optimum color mixing isachieved in the molten mass. Do keep the reactor closed to
avoid/minimize moisture loss
8/6/2019 Soap Presentation
23/29
8/14/2007 23
Your queries our answers .. Can I directly heat the vessel or do I need to have a
steam jacket system of melting flakes?
You need to use steam jacket system for melting ,oil injacket can also be used but temperature should be around100C
What is the temperature to be maintained for melting SNflakes?
You can maintain temperature in the range of 70-80C
Will there be any moisture loss during heating & do I needto add water externally to avoid transparency loss due tothe same?
Yes , there will be moisture loss during heating & youneed to add 1 to 1.5% of water to compensate moistureloss.
8/6/2019 Soap Presentation
24/29
8/14/2007 24
Your queries our answers ..At what temperature do I need to add color &
perfume?You may add color & perfume at around 70C -75C
Are the flakes compatible with both oil soluble & watersoluble color & perfume?Yes , but do conduct sufficient stability studies at yourend with respect to the particular color/perfume whichyou use
Can herbal/cosmetic ingredients be added to the soap; would it affect the transparency in any way?Yes you can , but here again do conduct sufficientstability studies
How much time does the molten mass take to set priorto cutting & stamping?It takes 4 to 5 hours at room temperature to setcompletely
8/6/2019 Soap Presentation
25/29
8/14/2007 25
Your queries our answers ..
How do I avoid air bubble formation during melting of flakes?
Keep the molten mass without stirring to allow the air bubblesto rise to the top, then pour the molten mass in the mould , air
bubbles will rise to the top. What is the final moisture content in the soap so generated?
The final moisture would be in the range of 17 18%
Can I reuse the chips generated during cutting/stamping?
Yes you can Will the soap give optimal foam in both soft & hard water?
Yes
Will the transparency remain throughout till the soap is
depleted?Yes , to ensure the same the soap is to be kept in perforatedtray after each usage
8/6/2019 Soap Presentation
26/29
8/14/2007 26
Your queries our answers .. Will the soap become mushy after few rinse cycles; do I need to
take any precaution to avoid mushiness?Please keep the soap in a dry soap dish , else it would absorbmoisture & thus become mushy.
Can the soap made from SN flakes be marketed for both bodywash & hair wash?Body wash is preferable , hair wash is not recommended since ithas some soap content & pH is around 9.0
When you say pH controlled skin friendly can we have a final
transparent bar of neutral pH?No , but we do offer Syndet noodles from which you could makeneutral pH opaque soap.
On keeping on the market shelf is the transparency affected byregional temperature variation globally?
No. But do ensure storage temperature is not below 10C 15C & not above 35C-40C.
8/6/2019 Soap Presentation
27/29
8/14/2007 27
Your queries our answers ..
What is the shelf life of the soap made from yourflakes?
One year under proper storage conditions withrespect to temperature & humidity.
What is the ideal packing & is there any specificmethod to be followed for packing?
You may either shrink wrap or use the Butterpaper wrap as is being currently followed universallyfor soaps.
8/6/2019 Soap Presentation
28/29
8/14/2007 28
Unleash your creativity with designs& shapes.
8/6/2019 Soap Presentation
29/29
8/14/2007 29
Creativity is more than just beingdifferent. Making the simplecomplicated is commonplace--making the complicated simple,
awesomely simple--that'screativity.
-- Charles Mingus