Upload
vuongthuan
View
233
Download
1
Embed Size (px)
Citation preview
In 1990 Soilmec was awarded with the certification of its
Quality System complying with ISO 9001:2000 standards.
CERTIFIED QUALITY SYSTEM
SOILMEC distributes machinery and structures all overthe world, supported by SOILMEC subsidiary companiesand representative offices as:
SOILMEC LTD - U.K.SOILMEC MISR S.A.E. Co. - EgyptSOILMEC (H.K.) Limited - Hong KongSOILMEC JAPAN CO LTD - JapanSOILMEC S.P.A. - Beijing Repr. Office - P.R. ChinaSOILMEC FAR EAST PTE.LTD - SingaporeSOILMEC EMIRATES - U.A.E.SOILMEC GULF - U.A.E.
SOILMEC S.p.A.Ground Engineering Equipment5819, via Dismano47023 Cesena (FC) - Italytel. +39-0547-319111fax +39-0547-318548http:// www.soilmec.ite-mail: [email protected]
G r o u n d E n g i n e e r i n g E q u i p m e n t G r o u n d E n g i n e e r i n g E q u i p m e n t
T-108TRUCK MOUNTEDHYDRAULIC DRILLING RIG09
/200
4-15
00 -D
/F-C
ils-Il
Dig
itale
TRUCK MOUNTED HYDRAULIC DRILLING RIG
A new model
T-108
1 - Rotaring turret with Cummins dieselengine and sound proofed canopy,mounted on sliding cradle.
2 - Winch units 102 kN and 41 kN
3 - Sliding cradle: 1000 mhorizontal stroke
4 - Self-erecting mast withstanding thefull torque all over the length. It’scomposed by one single elementincluding sheave cathead.
5 - Cathead with service jib.
6 - Crowd system: 1,8 m stroke hydrauliccylinder.
7 - 100 kNm torque rotary table c/wtwo hydraulic motors and reducers.
8 - Telescopic kelly bar with guideconnection to mast with friction ormechanical locking type (see chart).
9 - Four hydraulic stabilizers mountedon sub-frame.
1
4
8
3
6
5
T-108 T-108
Working Condition Drilling Area
92
7
Transport Condition
T-108 is a drill unit designed to be fast, highly productive and easy to operate.It’s a fully hydraulic drilling rig mounted on standard, heavy duty truck.Thanks to its power, reliability, and novel configuration T-108 meets the needs for a highly capable, easilymobilized drilling rig.
Features of T-108:- All States no transport permits- Max. weight 27.2 tons including truck- All position drilling- Sliding cradle and outriggers on rigid sub-frame- Pull down system 1.8 m- Locking kelly or friction kelly (3 or 4 elements)- Max drilling depth: 30 m- New rotary: max torque 100 kNm- Cummins 6BT 5.9 C engine with sound proofed housing- Enclosed air conditioned operator cab- Electronic depthmeter and inclinometer
Optional features:- Low head room version- Extended depth, heavy version- Tieback capability
The nominal values are referred to 100% total efficiency.
Large diameter bored pile
mmm
kNmrpmrpmkNkN
TypekW (HP)
kNmmton
180030
100 @ 35 MPa (9 rpm)4317810241
CUMMINS 6BT 5.9C-30-T116 (156) @ 2200 rpm
73.5 / 124180016
Max. pile diameterPile max. depthMax nominal torqueMax drilling speedSpin - off speedMain winch nominal line pull (ISO M5 - L2 - T5)Service winch nominal line pull (ISO M5 - L2 - T5)EngineInstalled powerCylinder crowdCylinder strokeApprox.weight w/o truck
Truck dimensions can varyaccording to different models.
TRUCK MOUNTED HYDRAULIC DRILLING RIG TRUCK MOUNTED HYDRAULIC DRILLING RIG
Pictures
1,82,43,0
7,07,07,0
18,024,030,0
3x4x5x
Friction kelly bar – Ø 324 mmelements
n°length
mdepth
mweight
ton
1,82,4
7,07,0
18,024,0
3x4x
Mechanical kelly bar – Ø 324elements
n°length
mdepth
mweighttonn
1282
7
8436
4910
894
PU
LL D
OW
N S
TR
OK
E 1
800
4362
2951
403
550
1645
3500
9873
523
1950 1026
4088
59
1645 1400
2885 1200
3800
6440
9921
1500 1576
1800
3103
4123
CENTER OF GRAVITY
TR
UC
K F
RA
ME
LO
AD
EN
102
0
640
2540
100
60°
4258
3658
3200
2253 5000
R3500
R3300
R25
00
DRILLING AREA
135°
3045
R MIN. 2514 R MAX. 3336600
600
TRUCK MOUNTED HYDRAULIC DRILLING RIG
A new model
T-108
1 - Rotaring turret with Cummins dieselengine and sound proofed canopy,mounted on sliding cradle.
2 - Winch units 102 kN and 41 kN
3 - Sliding cradle: 1000 mhorizontal stroke
4 - Self-erecting mast withstanding thefull torque all over the length. It’scomposed by one single elementincluding sheave cathead.
5 - Cathead with service jib.
6 - Crowd system: 1,8 m stroke hydrauliccylinder.
7 - 100 kNm torque rotary table c/wtwo hydraulic motors and reducers.
8 - Telescopic kelly bar with guideconnection to mast with friction ormechanical locking type (see chart).
9 - Four hydraulic stabilizers mountedon sub-frame.
1
4
8
3
6
5
T-108 T-108
Working Condition Drilling Area
92
7
Transport Condition
T-108 is a drill unit designed to be fast, highly productive and easy to operate.It’s a fully hydraulic drilling rig mounted on standard, heavy duty truck.Thanks to its power, reliability, and novel configuration T-108 meets the needs for a highly capable, easilymobilized drilling rig.
Features of T-108:- All States no transport permits- Max. weight 27.2 tons including truck- All position drilling- Sliding cradle and outriggers on rigid sub-frame- Pull down system 1.8 m- Locking kelly or friction kelly (3 or 4 elements)- Max drilling depth: 30 m- New rotary: max torque 100 kNm- Cummins 6BT 5.9 C engine with sound proofed housing- Enclosed air conditioned operator cab- Electronic depthmeter and inclinometer
Optional features:- Low head room version- Extended depth, heavy version- Tieback capability
The nominal values are referred to 100% total efficiency.
Large diameter bored pile
mmm
kNmrpmrpmkNkN
TypekW (HP)
kNmmton
180030
100 @ 35 MPa (9 rpm)4317810241
CUMMINS 6BT 5.9C-30-T116 (156) @ 2200 rpm
73.5 / 124180016
Max. pile diameterPile max. depthMax nominal torqueMax drilling speedSpin - off speedMain winch nominal line pull (ISO M5 - L2 - T5)Service winch nominal line pull (ISO M5 - L2 - T5)EngineInstalled powerCylinder crowdCylinder strokeApprox.weight w/o truck
Truck dimensions can varyaccording to different models.
TRUCK MOUNTED HYDRAULIC DRILLING RIG TRUCK MOUNTED HYDRAULIC DRILLING RIG
Pictures
1,82,43,0
7,07,07,0
18,024,030,0
3x4x5x
Friction kelly bar – Ø 324 mmelements
n°length
mdepth
mweight
ton
1,82,4
7,07,0
18,024,0
3x4x
Mechanical kelly bar – Ø 324elements
n°length
mdepth
mweighttonn
1282
7
8436
4910
894
PU
LL D
OW
N S
TR
OK
E 1
800
4362
2951
403
550
1645
3500
9873
523
1950 1026
4088
59
1645 1400
2885 1200
3800
6440
9921
1500 1576
1800
3103
4123
CENTER OF GRAVITY
TR
UC
K F
RA
ME
LO
AD
EN
102
0
640
2540
100
60°
4258
3658
3200
2253 5000
R3500
R3300
R25
00
DRILLING AREA
135°
3045
R MIN. 2514 R MAX. 3336600
600
TRUCK MOUNTED HYDRAULIC DRILLING RIG
A new model
T-108
1 - Rotaring turret with Cummins dieselengine and sound proofed canopy,mounted on sliding cradle.
2 - Winch units 102 kN and 41 kN
3 - Sliding cradle: 1000 mhorizontal stroke
4 - Self-erecting mast withstanding thefull torque all over the length. It’scomposed by one single elementincluding sheave cathead.
5 - Cathead with service jib.
6 - Crowd system: 1,8 m stroke hydrauliccylinder.
7 - 100 kNm torque rotary table c/wtwo hydraulic motors and reducers.
8 - Telescopic kelly bar with guideconnection to mast with friction ormechanical locking type (see chart).
9 - Four hydraulic stabilizers mountedon sub-frame.
1
4
8
3
6
5
T-108 T-108
Working Condition Drilling Area
92
7
Transport Condition
T-108 is a drill unit designed to be fast, highly productive and easy to operate.It’s a fully hydraulic drilling rig mounted on standard, heavy duty truck.Thanks to its power, reliability, and novel configuration T-108 meets the needs for a highly capable, easilymobilized drilling rig.
Features of T-108:- All States no transport permits- Max. weight 27.2 tons including truck- All position drilling- Sliding cradle and outriggers on rigid sub-frame- Pull down system 1.8 m- Locking kelly or friction kelly (3 or 4 elements)- Max drilling depth: 30 m- New rotary: max torque 100 kNm- Cummins 6BT 5.9 C engine with sound proofed housing- Enclosed air conditioned operator cab- Electronic depthmeter and inclinometer
Optional features:- Low head room version- Extended depth, heavy version- Tieback capability
The nominal values are referred to 100% total efficiency.
Large diameter bored pile
mmm
kNmrpmrpmkNkN
TypekW (HP)
kNmmton
180030
100 @ 35 MPa (9 rpm)4317810241
CUMMINS 6BT 5.9C-30-T116 (156) @ 2200 rpm
73.5 / 124180016
Max. pile diameterPile max. depthMax nominal torqueMax drilling speedSpin - off speedMain winch nominal line pull (ISO M5 - L2 - T5)Service winch nominal line pull (ISO M5 - L2 - T5)EngineInstalled powerCylinder crowdCylinder strokeApprox.weight w/o truck
Truck dimensions can varyaccording to different models.
TRUCK MOUNTED HYDRAULIC DRILLING RIG TRUCK MOUNTED HYDRAULIC DRILLING RIG
Pictures
1,82,43,0
7,07,07,0
18,024,030,0
3x4x5x
Friction kelly bar – Ø 324 mmelements
n°length
mdepth
mweight
ton
1,82,4
7,07,0
18,024,0
3x4x
Mechanical kelly bar – Ø 324elements
n°length
mdepth
mweighttonn
1282
7
8436
4910
894
PU
LL D
OW
N S
TR
OK
E 1
800
4362
2951
403
550
1645
3500
9873
523
1950 1026
4088
59
1645 1400
2885 1200
3800
6440
9921
1500 1576
1800
3103
4123
CENTER OF GRAVITY
TR
UC
K F
RA
ME
LO
AD
EN
102
0
640
2540
100
60°
4258
3658
3200
2253 5000
R3500
R3300
R25
00
DRILLING AREA
135°
3045
R MIN. 2514 R MAX. 3336600
600
TRUCK MOUNTED HYDRAULIC DRILLING RIG
A new model
T-108
1 - Rotaring turret with Cummins dieselengine and sound proofed canopy,mounted on sliding cradle.
2 - Winch units 102 kN and 41 kN
3 - Sliding cradle: 1000 mhorizontal stroke
4 - Self-erecting mast withstanding thefull torque all over the length. It’scomposed by one single elementincluding sheave cathead.
5 - Cathead with service jib.
6 - Crowd system: 1,8 m stroke hydrauliccylinder.
7 - 100 kNm torque rotary table c/wtwo hydraulic motors and reducers.
8 - Telescopic kelly bar with guideconnection to mast with friction ormechanical locking type (see chart).
9 - Four hydraulic stabilizers mountedon sub-frame.
1
4
8
3
6
5
T-108 T-108
Working Condition Drilling Area
92
7
Transport Condition
T-108 is a drill unit designed to be fast, highly productive and easy to operate.It’s a fully hydraulic drilling rig mounted on standard, heavy duty truck.Thanks to its power, reliability, and novel configuration T-108 meets the needs for a highly capable, easilymobilized drilling rig.
Features of T-108:- All States no transport permits- Max. weight 27.2 tons including truck- All position drilling- Sliding cradle and outriggers on rigid sub-frame- Pull down system 1.8 m- Locking kelly or friction kelly (3 or 4 elements)- Max drilling depth: 30 m- New rotary: max torque 100 kNm- Cummins 6BT 5.9 C engine with sound proofed housing- Enclosed air conditioned operator cab- Electronic depthmeter and inclinometer
Optional features:- Low head room version- Extended depth, heavy version- Tieback capability
The nominal values are referred to 100% total efficiency.
Large diameter bored pile
mmm
kNmrpmrpmkNkN
TypekW (HP)
kNmmton
180030
100 @ 35 MPa (9 rpm)4317810241
CUMMINS 6BT 5.9C-30-T116 (156) @ 2200 rpm
73.5 / 124180016
Max. pile diameterPile max. depthMax nominal torqueMax drilling speedSpin - off speedMain winch nominal line pull (ISO M5 - L2 - T5)Service winch nominal line pull (ISO M5 - L2 - T5)EngineInstalled powerCylinder crowdCylinder strokeApprox.weight w/o truck
Truck dimensions can varyaccording to different models.
TRUCK MOUNTED HYDRAULIC DRILLING RIG TRUCK MOUNTED HYDRAULIC DRILLING RIG
Pictures
1,82,43,0
7,07,07,0
18,024,030,0
3x4x5x
Friction kelly bar – Ø 324 mmelements
n°length
mdepth
mweight
ton
1,82,4
7,07,0
18,024,0
3x4x
Mechanical kelly bar – Ø 324elements
n°length
mdepth
mweighttonn
1282
7
8436
4910
894
PU
LL D
OW
N S
TR
OK
E 1
800
4362
2951
403
550
1645
3500
9873
523
1950 1026
4088
59
1645 1400
2885 1200
3800
6440
9921
1500 1576
1800
3103
4123
CENTER OF GRAVITY
TR
UC
K F
RA
ME
LO
AD
EN
102
0
640
2540
100
60°
4258
3658
3200
2253 5000
R3500
R3300
R25
00
DRILLING AREA
135°
3045
R MIN. 2514 R MAX. 3336600
600
In 1990 Soilmec was awarded with the certification of its
Quality System complying with ISO 9001:2000 standards.
CERTIFIED QUALITY SYSTEM
SOILMEC distributes machinery and structures all overthe world, supported by SOILMEC subsidiary companiesand representative offices as:
SOILMEC LTD - U.K.SOILMEC MISR S.A.E. Co. - EgyptSOILMEC (H.K.) Limited - Hong KongSOILMEC JAPAN CO LTD - JapanSOILMEC S.P.A. - Beijing Repr. Office - P.R. ChinaSOILMEC FAR EAST PTE.LTD - SingaporeSOILMEC EMIRATES - U.A.E.SOILMEC GULF - U.A.E.
SOILMEC S.p.A.Ground Engineering Equipment5819, via Dismano47023 Cesena (FC) - Italytel. +39-0547-319111fax +39-0547-318548http:// www.soilmec.ite-mail: [email protected]
G r o u n d E n g i n e e r i n g E q u i p m e n t G r o u n d E n g i n e e r i n g E q u i p m e n t
T-108TRUCK MOUNTEDHYDRAULIC DRILLING RIG09
/200
4-15
00 -D
/F-C
ils-Il
Dig
itale
In 1990 Soilmec was awarded with the certification of its
Quality System complying with ISO 9001:2000 standards.
CERTIFIED QUALITY SYSTEM
SOILMEC distributes machinery and structures all overthe world, supported by SOILMEC subsidiary companiesand representative offices as:
SOILMEC LTD - U.K.SOILMEC MISR S.A.E. Co. - EgyptSOILMEC (H.K.) Limited - Hong KongSOILMEC JAPAN CO LTD - JapanSOILMEC S.P.A. - Beijing Repr. Office - P.R. ChinaSOILMEC FAR EAST PTE.LTD - SingaporeSOILMEC EMIRATES - U.A.E.SOILMEC GULF - U.A.E.
SOILMEC S.p.A.Ground Engineering Equipment5819, via Dismano47023 Cesena (FC) - Italytel. +39-0547-319111fax +39-0547-318548http:// www.soilmec.ite-mail: [email protected]
G r o u n d E n g i n e e r i n g E q u i p m e n t G r o u n d E n g i n e e r i n g E q u i p m e n t
T-108TRUCK MOUNTEDHYDRAULIC DRILLING RIG09
/200
4-15
00 -D
/F-C
ils-Il
Dig
itale
In 1990 Soilmec was awarded with the certification of its
Quality System complying with ISO 9001:2000 standards.
CERTIFIED QUALITY SYSTEM
SOILMEC distributes machinery and structures all overthe world, supported by SOILMEC subsidiary companiesand representative offices as:
SOILMEC LTD - U.K.SOILMEC MISR S.A.E. Co. - EgyptSOILMEC (H.K.) Limited - Hong KongSOILMEC JAPAN CO LTD - JapanSOILMEC S.P.A. - Beijing Repr. Office - P.R. ChinaSOILMEC FAR EAST PTE.LTD - SingaporeSOILMEC EMIRATES - U.A.E.SOILMEC GULF - U.A.E.
SOILMEC S.p.A.Ground Engineering Equipment5819, via Dismano47023 Cesena (FC) - Italytel. +39-0547-319111fax +39-0547-318548http:// www.soilmec.ite-mail: [email protected]
G r o u n d E n g i n e e r i n g E q u i p m e n t G r o u n d E n g i n e e r i n g E q u i p m e n t
T-108TRUCK MOUNTEDHYDRAULIC DRILLING RIG09
/200
4-15
00 -D
/F-C
ils-Il
Dig
itale