Solar-power plant (Altomonte – ITALY - 2007)

Legal office & Commercial office: Via Don B. Dacatra, 12/4 15067 Novi Ligure (AL) - ITALY

VAT IT02308360060 Contact:

Tel. +390143542109 - Fax: +39 0143 746170 Email address: terramap@libero.it

Web: www.terramap.org

FOREWARD

In October 2010 a pool of Italian consultant firms flows together in an partnership called

TERRAMAP®, with the intent that put all their experiences in a single, qualified and more

powerful organization, able to offer a very hi-specialized engineering services in the world of

Energy.

Terramap® is composed by a team of technicians having many years of experience which was

acquired among the most important Italian engineering companies, in the field of design,

installation and management of oil, petrochemical and manufacturing plants, power plants,

transfer plants (transmission lines, oil, gas, water pipelines etc.), methane supply, solid fluids

treatment (depuration) plants; all of them are absolutely qualified to supply the best and

affordable solution to any kind of industrial design, by a deep and complete investigation of the

purposed site .

Thanks to an accurate selection of its own staff and to an adequate organization of every phase

of the various project executions, Terramap® could supply professionally first-rate products within

very short time, in any case shorter than average and with the most affordable price.

Warm-water pipeline (Southern Italy 2005-2008)

Our main office is headquartered in Italy, in the North Italian Industrial triangle’s centre of mass

“Milan – Turin - Genoa”, in a small industrial town. Anyway we can follow any type of works all

over Italian National Territory and Abroad.

In a world where technology can take a complete survey with getting more and more miniaturized

tools, where a simple connection to Internet can help capture important cartographical data,

where a contract with the Space Agency permits to receive satellite surveys of big areas without

moving from its own office, Territorial Engineering Services have to adapt, grow, change

harmoniously together with all what have been its natural interfaces. The idea that created this

new Company started from this consciousness, and also from the willingness to provide a service

that attains 100% to the European quality standard.

Methane terminal (Southern France 2007-2008)

Most part of Terramap® members gathers more than fifteen years of experience in Italy and

abroad in geodesy, territorial analysis, civil design and industrial constructions. Thanks to the

various and different experiences in engineering service related to the designing of technological

networks branch, our group might realize technical economic feasibility studies, general and

peculiar projects, surveys and environmental reports and all what could be necessary to realize

industrial plants in the energetic branch: electric power lines, oil pipe-line, gas pipe-lines and also

all the primary services such as: town-planning (streets, water main supplies, sewers) and all

what concerns the civil, mechanical and basic electric projecting.

Terramap® is not a huge engineering company, neither one of the biggest group in the world, but

every single work is scrupulously taken into consideration and analysed under any specific point

of view and detail to front every single unexpected event.

Logistics, methodology’s study and time management are concepts scientifically applied; this is

the reason we’re able to manage relevant and important projects; our main qualities are an

extreme suppleness joint to a deep knowledge of the job.

This can be possible due to the fact that usually we collaborates with external hi-qualified and hi-

professional collaborators in a matter to improve the force to realize a complete project: from the

base topographic map up to the of “as-built” documents.

Thermal Power Station 6x220MW - Channel Bridge (Iraq 1980-1985)

Company profile

Terramap® manager is Marco Campi, born in 1959 and freelancer since early 80s. His

experience started in Iraq in 1980, in quality of sites assistant during the building of the 220MW 6

units’ plant, managed by G.I.E. Group.

For the following years he developed and improved his knowledge working as technical

consultant among some of the biggest Italian Company such as SNAM, SAIPEM, ABB, EDISON,

TERNA and more over.

In the second part of his professional life he has been involved in a great quantity of project, very

different in contents and problems, especially in the field of power lines plants.

In the latest years he concentrated his assignments to develop environmental impact studies,

territorial analysis, main and peculiar oil electric power lines projects, gas pipe-lines and energy

production’s plants.

Shipping terminal – embankment works (Khor-Al Zubair – IRAQ 1981)

Terramap®, in the field of technical network and power plant (transmission line, power, gas and

oil pipelines, etc.) might offer a wide range of services:

Base engineering

Route-line scouting

Ground survey

Research among Public and Private Institute

Cartography

Flow-chart operative schemes

Line-process calculations

Data sheets and system packages elaborations

Lay-out design

Geometric and electrical design

Piping support

Mechanical, electrical and civil drawings

Material research and supplying

Organization Chart

GGeenneerraall MMaannaaggeerr:: MMaarrccoo CCaammppii

PPrroojjeecctt eennggiinneeeerr:: EEnnrriiccoo TTaassssiissttrroo

DDaanniieellee PPeessttaarriinnoo

GGiiaannlluuccaa TTeemmppoorriinn

AAnnttoonniioo RRiinnaallddii

OOppeerraattiivvee TTeeaamm:: RRoobbeerrttoo BBoorrrraa

RRoossaarriioo VVaannaaccoorree

MMaarrccoo BBeennssii

DDaanniilloo CCaassssiinnaa

AAnnddrreeaa PPiiaacceennttiinnoo

AAddmmiinniissttrraattiioonn:: OOrrnneellllaa BBiissiioo

AArrcchhiitteeccttuurree:: MMaarrttaa CCaassaannoovvaa

GGeeoollooggyy:: GGiioorrggiioo SSaallvviinnii

How we do

Services due to Authorisation document

Logistic and “kick-off”

Land survey acquisition

Data management and design issue

Supplying and shipping

Guarantees

Thanks to an accurate evaluation of all possible odds and costs, checking-up “step-by-step” the

estimate execution, we’re able to define with good approximation a real budget for any tender.

Once acquired a job, in every moment we get under control our behaviour in accordance with the

rules established by Terms of Contract; first of all we appoint a responsible, which is duty is to

define the different phases of design, from the requested equipment to the investigation of the

spot, up to the final delivered drawings.

High voltage transmission line (Italian Territory 2002-2011)

We put particular care to the scouting of the area, by a correct acquisition of the data field, so to

eliminate any misunderstanding or errors during the elaboration; actually technology permit us to

acquire all information, thanks to most modern equipment, like GPS technologies, aerial and

spatial survey, and so on. All data acquired outdoor are elaborate by absolute certified software,

just to the final issue of all drawings.

In case of particular tender, or besides request from the Customer, we might supervise the supply

and the shipping of materials, and supervise to the construction of the plant.

During the advancement and the develop of the project, our company assure the Customer of the

good and proper performance of works, by an effective internal control, sometimes by a

Consultant Engineer, duty of which is to save-off all aspects of Job, especially during the phase

of sizing and security.

Shipping Terminal (Southern Iraq 1980-81)

Environmental Impact Assessment is an absolute necessity for any project that will impact

undisturbed vegetation or habitat. Terramap® could supply a huge amount of publicly available

Geographic Information Systems (GIS) information which includes Environmental GIS data

required for comprehensive Environmental Impact Assessment. More than ten years of

experience using GIS to perform surveying means Terramap® can perform knowledgeable,

comprehensive and cost effective GIS products and services for our clients. Utilizing the full suite

of the industry standard ESRI ArcGIS® and ArcInfo® software suite ensures maximum

functionality, flexibility and compatibility. The layering of sensitive habitats and vegetation types

with the proposed projects impact footprint, and quantifying the area of disturbed habitat is a

prime example of the power of GIS. Immediate access to existing environmental information

allows comprehensive yet efficient Environmental Assessment which is crucial for successful land

development projects.

Certificate of merit assigned to Marco Campi (owner of STUDIO EUCLIDE) in2004

Traditionally, transmission line design practices have been comprised of conservative

assumptions which easily model an elaborate and complex structural system. Continued

developments in computers and software have given us the capability of breaking these normally

inflexible traditions, and have allowed the industry the opportunity to re-engineer the entire

transmission line design process. Finally, the seamless integration of all aspects associated with

transmission line surveying, engineering, drafting, procurement, and construction is essential to

maximize the full benefits of the re-engineering effort.

Recent developments in surveying technologies have allowed the industry to re-think the station-

elevation-offset formats that designers have traditionally used for transmission line profile

modeling. Today’s generally accepted method of surveying is some form of three-dimensional

geographical information system (GIS) type representation. Data are usually collected in

electronic format, and the transmission line software must be capable of reading the data

intelligently in any form. Total Station, Geographical Positioning System (GPS), Photogrammetry,

electronic topographical maps (USGS), and scanned or digitized existing profile drawings have all

been employed to develop quick and relatively accurate terrain models for transmission lines.

400 kV route-line (Chiapas – Mexico 2002)

Remote sensing is the acquisition of information about an object or phenomenon, without making

physical contact with the object. In modern usage, the term generally refers to the use of aerial

sensor technologies to detect and classify objects on Earth (both on the surface, and in the

atmosphere and oceans) by means of propagated signals (e.g. electromagnetic radiation emitted

from aircraft or satellites.

Terramap®, tank to an adequate grooming in remote sensing background of its own staff,

maintains a permanent contact with Italian Space Agency, and by this way could supply in

relative short time 3D Terrain Model of large areas of the world surface; in such a way we could

perform preliminary studies for a wide range of infrastructure plants, like transmission lines,

Aeolian and solar plants, and every type of pipeline network.

Aeolian plant revamping: GPS survey (Southern Italy 2003-2006)

Follow you can take a view of the most important project in which Marco Campi was involved in

his professional experience.

At the end of this brochure we attached a list of declarations issued by some of the most qualified

Italian Company to Marco Campi, concerning his behavior during the development of job.

We think that professional testimonial are better than million of words.

Resume of the main experiences

1980: North Rumaila (IRAQ) – Oil Pump Station (NUOVO PIGNONE): site’s assistance

1981/1982: Baiji (IRAQ) – 6x220kW Thermal Power Station (GIE): General Topography

1982/1983: Colleferro (RM) and Monte S. Savino (AR) – Algerian Methane pipeline 43-48”

(SNAMPROGETTI): route lines and measuring.

1983/84: Tizi Ouzou and Bouira (Algeria) – detergents plant (ITALIMPIANTI): technical office, civil

works.

1986: Nasyrya (IRAQ) – refinery revamping (SAIPEM): site’s assistance

1985/86: Northern Italy – High Voltage lines (ENEL): route line study, surveys.

1986/90: Solignano (PR) – Railway from Fornovo to La Spezia: route lines and curve design

1990/91 Millesimo (SV): A6 Torino-Savona Highway (SPEA): route lines and surveys.

1992/1997: Northern Italy High pressure methane pipelines (SNAM): route lines study, surveys, line

design, technical feasibility and digital cartography.

1995/96: Northern Italy – Volta Gas pipeline System (EDISON GAS): feasibility study and

environmental impact.

1995/96: A8 Highway – enhancement to create the third lane (SPEA): route lines and surveys.

1996/97: Abruzzi and Lazio – “Bussi” 26” Methane pipe-line – Roccasecca (EDISON GAS): surveys

and cartography.

1997/98: Veneto – Enhancement “Veneto” gas pipeline (EDISON GAS): route line study, surveys, and

line design.

1998: Apricena (FG) – Apricena-Lucera’s Gas pipeline enhancement (EDISON GAS): feasibility study,

route line and survey.

1998: Abu Dhabi (U.A.E.) – commercial study for the creation of engineering structures – Projecting

services and consultancy for the Oil and Extractive Industry.

1999/2001: Italian National Territory – High and Medium Voltage electric lines: feasibility study and

environmental impact, designing of the line geometry.

2000/2001: A4 Highway TORINO-MILANO – enhancement third lane (SPEA) – geodetic networks,

surveys, digital cartography.

2002: EDISON Spa. – Middle voltage transmission line (BG): surveying

2002: EDISON Spa. Hydro electrical power station: structure control

2002: ABB Spa. – High voltage transmission line 400kV Chicoasen – Manuel Moreno Torres

(CHIAPAS – MEXICO): general survey

2002: ENEL DISTRIBUZIONE – 132kV transmission lines in northern territory: surveying

2002-SOGIMP MILANO: 26” gas pipeline: surveying and design

2002-2003: SOGIMP MILANO - 16” gas pipeline EDIPOWER power station: surveying, cartography,

and construction supervising

2003-2004: EDISON Spa. 150kV transmission line Tirano – Campocologno (Switzerland): scouting,

surveying and design for construction

2003: SOGIMP MILANO: 20” gas pipeline Campo Gas EDISON (TV): surveying

2003-2004: EDISON ENERGIE SPECIALI Spa. – Faeto (FG) Aeolian Plant: scouting, geodesy,

surveying and underground transmission lines design

2003: EDISON Spa. SOL Spa. Mantova chemical plant – civil design

2003: GHIZZONI Spa. – ENIPOWER 12” gas pipeline (Sannazzaro dé Burgundi (PV): construction

management

2003: EDISON Spa. – 220kV transmission line TAL OIL Somplago – Mauthern (Austria): scouting and

feasibility studies

2003: EDISON Spa. –380kV transmission line CTE Presenzano (SA): scouting and feasibility studies

2003-2004: BONATTI Spa. – SNAM gas pipelines crossing /hi-speed railway TAV Milano – Torino:

construction management

2003 - EDISON RETE Spa. –220kV transmission lines surveying

2003 – 2004: SOGIMP MILANO - SNAM 16” gas pipeline Mondovi – Cuneo: surveying

2004: SOGIMP MILANO - SNAM 20” gas pipeline SNAM Mornico (BG) – Ospitaletto (BS): surveying

2004: EDISON Spa. – 400kV transmission line Bovisio Masciago (MI) – Lavorgo (Switzerland):

scouting and feasibility studies

2005: TERNA Spa. – 132kV transmission line re-vamping (Savona – Italy): survey and design

2005: EDISON Spa. – 300 mm steam pipe-line SER.ENE. Termoli plant (Molise – Italy): surveying

and civil design

2006-: EDISON Spa. – 900 mm steam pipe-line FIAT MELFI plant (Basilicata – Italy): surveying and

civil design

2006-2010: EDISON Spa. – 1200 mm steam pipe-line CTE CANDELA plant (Puglia – Italy): surveying

and civil design

2006: PIZZAROTTI Spa. Descenderie de Saint-Martin La Porte (Savoy-France): site assistance, route

line tunnel

2007: PIZZAROTTI Spa. Méthane Terminal of Marseille: site assistance

2008/2009 : PANATTONI INC. - Italian Territory - environmental studies for the construction of a net

of retail park: survey, geology, evaluation and arrangement analysis

2009: SPEA: Milano external beltway design: geodesy networks and 3D Terrain model

2010: SPEA: Grosseto Interstate nr. 1 enlargement design: geodesy networks and 3D Terrain model

2011: EDISON: Southern Italy - sub-ground hi-voltage network: survey, authorization and design

20097 San Donato Milanese (Ml) PO. Box 12060,20120 Milano Telex-3 I 0246 ENI I Fax: 02/5203841 I Tel: 02/5201

01/09/1998

From:

MATAPL/APL-A

TO WHOM IT MAY CONCERN

We hereby declare that Marco Campi, through years 90 – 00, in quality of partner of GTN

company, for engineering services, with registered office in Novi Ligure (AL), Italy, has

accomplished, in full compliance with the contractual terms and requirements, any type of services

regarding: topography, cartography, applications to the competent institutes, piping, gas network

flow-schemes, as built drawings, computerized services, G.I.S. project.

TO WHOM IT MAY CONCERN

Subject: DECLARATION FOR MARCO CAMPI

We hereby declare that Marco Campi, in quality of consultant engineer for design services, has accomplished the

here below described job with its own pertinence and high quality of its services:

Furthermore, EDISON GAS declares that Marco Campi, both during the

execution of above mentioned job, both in a successive control phase, failed in no

mistakes.

Best regards.

GAS LINE

TOTAL LENGTH

DIAMETER

TYPE OF WORKS

BUSSI (PS) - ROCCASECCA (FR) - ITALY

130 Km.

20"

Feasibility study, tracing, landscape-

Ambient bonds and respect areas

Individuation, topographical survey; lines,

Crossing and special points engineering.

QUALITY TESTIMONIAL

This document has been issued with the approval of:

ENEL Spa. - Viale Regina Margherita, 137 - 00198 ROMA

To/for: STUDIO EUCLIDE

With the purpose certificate that Marco Campi, in quality of consultant engineer, carried out a

collaboration among our Company since 1984, and, actually, is part of our Vendor List, in quality

of 'Consultant Engineer Firm' for cartographical and topographical works.

Within this period they supplied us their services for the project indicated below, as follow:

• From 1984 up today: Marco Campi was involved in many project regarding the study for the

realization of power-lines 15 kV, 132 kV and 380 kV located through the territory of the Northern

Part of Italy. The projects were for the realization of power-lines 15 kV, 132 and 380 kV located

through the territory of the Northern Part of Italy.

During the execution of this works Marco Campi expressed the services

regarding:

- Land survey and design

- Route-line stacking out

- Fly surveying of obstacles crossing

- Survey of the profile

- Cadastral maps

- Large-medium and little scale geographical map acquisition

- Investigation among the private and public Society

- Technical drawings and other support supply.

Along and during the execution of all the jobs like upon, Marco Campi expressed it service without

fall in mistake and never could be necessary for us terminate the Contract or invalidate it too.

Therefore we declare that Marco Campi might be described as a Contractor that always respected

all the duties for its own pertinences and supplied all services in order of excellent quality.

In trust

R. Cortese

ENEL Società per azioni – sede legale Roma Corso Regina Margherita, 267 trib. Roma n. 7050/92 CCIAA 756032 10143 Torino tel. 011/7781111

P.I. 00934061003 – C.F. 00811720580

TO WHOM IT MAY CONCERN

DECLARATION

We declare that MARCO CAMPI, in quality of consulting engineer among SO.GE.PI.

Milan, has developed and executed in perfect accordance to the contractual terms and

requirements the services of:

Feasibility study,

Topographical surveys;

Line and crossing detail engineering;

Supervision to construction for the following plants:

1. Gas line TORBOLE C. (BS) - SPINADESCO (CR)

8" - 40 Km. total length

2. Gas line PADOVA-

VICENZA

8" - 45 Km. total length

During the above-mentioned period, Marco Campi showed great experience in each phase

of the job and supplied all its services successfully.

With regards

AIR LIQUIDE ITALIA

DIVISIONE GRANDE

MASSA

(P.P.Spinatelli)

AIR LIQUIDE ITALIA Srl. SEDE CENTRALE: 20148 MILANO - VIA CAPECELATRO, 69 - tel. 02-40261 SEL. PASS. FAX 02-48705895 – CAS. POST. 15036 - 20150 MILANO - C.C.P. 16082208 - CAPITALE SOCIALE L. 338.653.690.000 int. vers. C.C.I. A.A. MILANO 1073145 - TRIBUNALE DI MILANO - REGISTRO SOCIETÀ' N° 204647 - CODICE FISCALE E PARTITA IVA 06194910151

Viale Monte Grappa. 3 Telefono 02/6313.1 Telegrammi Tecnimont

20124 Milano Fax 02/6313.9269 C.P. 10524 - 20110 Milano

E-mail divai@tecnimont.inet.it

Telex 323386 TCM I

QUALITY TESTIMONIAL

Tecnimont Spa has issued this document. For MARCO CAMPI

With the purpose to certificate that Marco Campi, in quality of partner of GTN (registered

office in Novi Ligure, Italy) carried out a collaboration among our company in 1992-1993;

within this period they supplied us the services required for the project as indicated below.

Land survey and graphic rendering of all river and road crossing and the route line of

the High Speed Railways Milano - Genoa (COCIV Project).

Along and during the execution of all the job mentioned upon, the above mentioned firm expressed it

service without fall in mistake, and never could be necessary for us to terminate

the Contract or invalidate it too; therefore we declare that Marco Campi might be

described as a Contractor that always respected all the duties for its own

pertinences, and supplied all services in order of excellent quality.

TECNIMONT Spa.

Environment and Infrastructures Division

Director

B. Giuliano

Tecnimont S.p.A. Sede legale Registro Imprese Milano n. 110227

Ingegneria Montedison Viale monte Grappa, 3 - Milano R.E.A. Milano n. 574643