Solaria Acplink

7/29/2019 Solaria Acplink

1/10

SOLARIAMICROWAVES.A.www.solariaperu.com

ACPLINK V5.0Software by Microwave Networks Design

Profiles of Radiolinks

Analysis of Reflection

Interference Analysis

Antenna Height CalculationClearance Analisis

Integration with Google Earth

Network on interfase GE

Assistant Design Microwave Networks

Search Repeaters

Availability Calculation

Models Vigants-Barnett, ITU-RSpace Diversity / Frequency Diversity

Database SRTM-3 / SRTM-1

Database Online GE


2/10

ACPLINK V5.0

ACPLINK

ACPLINK is a assistant software by design and development of microwave

networks PDH, SDH, SCADA, etc, built according to ITU-R recommendations and

technical considerations of the telecommunications industry, ACPLINK is a

support tool for design engineers who seek a computerized simulation of

microwave networks.


3/10

ACPLINK V5.0EASY TO USE AND FRIENDLY

ACPLINK has a complete set of tools very easy to use and friendly, with a very short learning

curve, the philosophy of software development is to provide tools ACPLINK for use by aSenior Engineer and a Junior Engineer with few hours of training, learning is intuitive since it

is software developed by Project Engineers for Project Engineers.

TOOLS

ACPLINK has very useful and powerful tools, many of the tools are unique ACPLINK when

developing microwave network, a specific example arises during the acquisition of a new

web site to expand a microwave network, ACPLINK has several tools for searching

repeaters, the program literally tells with a picture of the geography where to put a repeaterbetween the backbone and the target site to which you have to go, ACPLINK has a tool

called assistant design that calculates the position exact repeaters along a network that tries

to plan, only enter the start and end coordinates and the program then calculated ACPLINK

step jumps and will indicate the results in an Excel table.

VERSATILE

ACPLINK is software that allows installation on multiple PCs, but the program will only work

on that PC with the USB key authentication.

GRAPHIC INTERFACES

ACPLINK is built on standards and ITU-R recommendations, recommendations from the

telecommunications industry, the software development team includes design engineers that

provide ideas for graphic interfaces, also involved software engineers and engineers with

extensive experience in the design of microwave networks.


4/10

TOPOGRAPHIC DATABASE

ACPLINK uses the SRTM topographic database and SRTM-3-1, the latter is only available toU.S. and their associated states, the database SRTM-3 is available for download online and

this is usually used by the program ACPLINK, the image shown below is a representation of

the numerical database of geography in a monochrome image and is visual reference for

user, it is easier for the user to navigate the working image..


5/10

PROFILE RADIOLINK

ACPLINK has a module that lets you create profiles for a radiolink, the module allows testing

and analysis on the profile, also available for integration with Google Earth to view the profile

in the GE graphical interface as shown in the following pictures .


6/10

PROFILE WITH MISSING DATA

ACPLINK uses the SRTM topographic database

and SRTM-3-1 (only USA), the database

SRTM-3 has some shady areas without terrain

height data, so that if a radiolink then crossesthese areas, the profile show an image as seen

on the left, in the absence of data, the program

ACPLINK interpolates data from existing data at

their ends, but we also have an online solution:

the program has an algorithm that can connect

to Google Earth servers and request the

missing data, data acquisition is automatic.

MODIFIED PROFILE

After obtaining the missing data, the software

automatically update the image with the profile

with no missing data, we should mention that

the data obtained from Google Earth are in the

same format WGS84 which is based on SRTM-

3 data


7/10

PROFILE REAL-TIME RADIO LINK

IMAGE WORK AREA

ACPLINK has the Red module allows us togenerate the profiles of a radiolink from a given

image, you can create profiles in real time by

moving the cursor, also has available a number

of tools for applications PtMP

PROFILE

Once we have chosen the two points of our

radio link now if we can generate the final profile

with the Perfil button.


8/10

REPEATER

ACPLINK has several tools to bucar of repeaters in when there is no line of sight

between the initial and final position, shown in the example below shows two

points A and B without line of sight and the program calculates a set of solutionswhich could installing a repeater, and it is seen that real-time profiles of both

pointA to the variable as variable to point B have line of sight.


9/10

AVAILABILITY CALCULATION MODULE

DATABASES OF EQUIPMENT AND LINES TRANSMISSION

ACPLINK has the module Junior for calculation of link availability, data are acquired profileand database of equipment, transmission lines and antennas, the user only has to choose

from a range of options, calculation models are available for popular models of computation:

Vigant-Barnett, ITU-R P.530-12, ITU-R and ITU-R Rep.338 P.530-6.


10/10

AVAILABILITY CALCULATION MODULE

DATA BASE ANTENNAS

ACPLINK has a database of antennas that the user will be built according to the technical

requirements, as shown in figure lines below each antenna has technical specifications

also contain radiation patterns HH, HV, VV and VH the same as serve for InterferenceAnalysis

This last tool is not included in the license ACPLINK, Interference Analysis Tool is a

separate program that integrates the program ACPLINK V5.0

Wilber [email protected]

Solaria Microwave S.A.Lima - Peru

Documents

Solaria Acplink