Solusi error ink cartridges are not installed properly (error E5) Tekan Power On/Off Masukan Kabel power listrik. Tombol power tetap ditekan Tekan Tombol Reset 1x, lepaskan Tombol Power.Tekan Reset dua kali lagi Sampai Menjadi 0

(tekan tombol terus menerus) Tekan tombol + untuk merubah 0 ke 1 Tekan tombol power –> tombol start sampai printing 1 halaman Buka tutup printer Cabut kabel power Lepaskan catridge 40 dan 41 atau 830 dan 831 Pasang kabel power Tekan tombol power Buka tutup scanner Masukan catridge 40 dan 41 atau 830 dan 831

Solusi MERESET waste ink counter (error E16) : Matikan printer (kabel power masih tercolok), tekan dan tahan tombol STOP/RESET kemudian

tekan tombol ON/OFF Tahan tombol ON/OFF, tekan tombol STOP/RESET 2x Lepaskan kedua tombol dan printer akan masuk ke SERVICE MODE Printer akan charging Setelah printer selesai charging, tekan tombol STOP/RESET 4x. (Waste ink counter reset) Setiap kali tombol STOP/RESET ditekan, lampu ON/OFF akan berubah warna hijau dan oranye Matikan printer dan cabut kabel POWER Hidupkan kembali printer.

The number of the Resetbutton pressingLED Function Remarks0 time Green Power off1 time Orange Service pattern print2 times Green EEPROM print3 times Orange EEPROM reset4 times Green Waste ink counter reset5) Unplug cable power. (for MP145 / MP150)6) Turn Off Power. (for MP160)

mas resetter printer canon mp 145-160 bkn pakai cara manual?Dgn cara manual juga bisa resette. gni caranya :1. tahan power sambil teken tombol stop/reset 2x.2. tgu lampu indicator jadi 03. teken stop/reset 1x4. teken power 1x (dia print 1x)5. teken stop/reset 2x6. teken power 1x (dia print 1x)7. teken stop/reset 3x8. teken power 1x (tidak ada proses print)9. teken stop/reset 4x10. teken power 1 x (tidak ada proses print)11. matekn printer, jika masih error 27 ulangi 1x lagi

1. 1=> service/factory print out,including sensor check2. 2=> eeprom – info printout3. 3=> eeprom – initilzation4. 4=> reset waste ink

Cara Reset Printer Canon MP145 dan MP160

Printer ga mo ngeprint !!! Mimpi buruk ini akhirnya terwujud juga..dikejar deadline tugas kantor wajib kelar dalam dua hari..kiamat telah tiba bagiku…hoorrreee akhirnya aku panik..tekan start gamo, cabut kabel power juga gamo, cek sana cek sini juga gada reaksi..huh mataku tertuju pada layar display nunjukkin angka E5.…..apa maksudnya dengan E5 itu ?dengan rasa penasaran yang terlalu didramatisirakhirnya pertanyaan ini aku lemparkan kepada uncle google yang dengan bijaksana memaparkan sekian ratus link yang “mungkin” bisa menjawabnya.

dan berikut ini hasilnya/error ink cartridges are not installed properly (error E5) :

Step 1 : Push Power switch by continue (Tekan Power On/Off)Step 2 : inserrt plug(Masukan Power, Power Tetap di Tekan)step 3 : Tekan Tombol Reset 1x, lepaskan Tombol Pwr, Tekan Reset dua kali lagi Sampai Menjadi 0 (tekan tombol tanpa jeda)Step 4 : Push + display change from 0 to 1 (tekan tombol + untuk merubah 0 ke 1)Step 5 : Push Power switch again , Printer will be print 1 page(tekan tombol power –> tombol start sampai ngeprint 1 hal.)step 6 : Open cover (buka tutup printer)Step 7 : Unplug (cabut kabel power)Step 8 : Take out ink 40 and 41(lepaskan catridge 40 dan 41)Step 9 : Insert plug again (pasang kabel power)Step 10 : Push power switch (tekan tombol power)Step 11 : Open cover (scan cover) (buka tutup scaner)Step 12 : Inksert ink 40 , 41 again (masukan catridge 40 dan 41)

waduh kunyuk jelek…harap-harap bisa berhasil dengan gemilang ternyata proses reset hanya sampai di step 4..lengkap sudah penderitaanku..akhirnya aku berkesimpulan tangki/catridge tintanyalah yang bermasalah..aku pinjam tangki tinta punya teman dan aku coba eksekusi print..gdubrak…display printer nunjukkin E16..aku ulangi pencarian via uncle google yang akhirnya berhasil menemukan resepnya dan printer MP145 kesayanganku berhasil ngeprint berlembar-lembar ketikan dengan sukses dan akupun tersenyum puas..walau gajian nanti aku harus menyisihkan Rp. 165.000,- tuk beli tangki tinta yang baru.

berikut ini resep ngereset waste ink counter (error E16) :

1. Matikan printer (kabel power masih tercolok), tekan dan tahan tombol STOP/RESET kemudian tekan tombol ON/OFF2. Tahan tombol ON/OFF, tekan tombol STOP/RESET 2x3. Lepaskan kedua tombol dan printer akan masuk ke SERVICE MODE4. Printer akan charging5. Setelah printer selesai charging, tekan tombol STOP/RESET 4x. (Waste ink counter reset)6. Setiap kali tombol STOP/RESET ditekan, lampu ON/OFF akan berubah warna hijau dan oranye

7. Matikan printer dan cabut kabel POWER8. Hidupkan kembali printer.

The number of the Reset :button pressingLED Function Remarks0 time Green Power off1 time Orange Service pattern print2 times Green EEPROM print3 times Orange EEPROM reset4 times Green Waste ink counter reset5) Unplug cable power. (for MP145 / MP150)6) Turn Off Power. (for MP160)

Error Code/Kode Error :E2-2 = No paper (ASF)E3-3 = Paper jamE4 = No inkE5-5 = The ink cartridges are not installed or a non-supported ink cartridge is installed, or the ink cartridges are not installed properlyE8 = Waste ink absorber full, or platen waste ink absorber fullE9 = The connected digital camera / video camera does not support Camera Direct PrintingE14 = The Ink cartridges whose destination are wrongE15 = Ink cartridge is not installed E16 – Ink remaining is unknownE16 -E19 = Failed to scan head alignment sheetE22 = Carriage errorE23 = Paper feed errorE24 = Purge unit errorE25 = ASF(cam) sensor errorE26 = Internal temperature rise errorE27 = Waste ink absorber full or platen waste ink absorber fullE28 = Ink cartridge temperature rise error -E29 = EEPROM errorE33 = Paper feed position errorE35 15 = USB Host VBUD overcurrent error – USBE37 17 = Abnormal motor driver errorE40 20 = Other hardware errorE42 22 = Scanner error

Selamat mencoba

Cara Mereset Printer Canon MP145 & MP160

Canon MP160 , MP145

1) With the printer powered off but connected to a power source, press the Power button while pressing and holdingthe Stop/ Reset button.2) When the Power is lit, press the Stop/Reset button two times while pressing and holding the Power button.3) When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into aservice mode. (Waiting for menu selection)4) When the on/off lights in green, press the Stop/Reset button the specified number of time(s) according to the

function listed in the table below.(Each time the Stop/Reset button is pressed, the LED lights alternately inorange and green, starting with orange.)note: press 4 times for waste ink counter reset.

The number of the Resetbutton pressing

LED Function Remarks0 time Green Power off

1 time Orange Service pattern print2 times Green EEPROM print3 times Orange EEPROM reset4 times Green Waste ink counter reset

5) Unplug cable power. (for MP145 / MP150)6) Turn Off Power. (for MP160)

Error Code :E2-2 = No paper (ASF)E3-3 = Paper jamE4 = No inkE5-5 = The ink cartridges are not installed or a non-supported ink cartridge is installed, or the ink cartridges are not installed properlyE8 = Waste ink absorber full, or platen waste ink absorber fullE9 = The connected digital camera / video camera does not support Camera Direct PrintingE14 = The Ink cartridges whose destination are wrongE15 = Ink cartridge is not installed E16 – Ink remaining is unknownE16 -E19 = Failed to scan head alignment sheetE22 = Carriage errorE23 = Paper feed errorE24 = Purge unit errorE25 = ASF(cam) sensor errorE26 = Internal temperature rise errorE27 = Waste ink absorber full or platen waste ink absorber fullE28 = Ink cartridge temperature rise error -E29 = EEPROM errorE33 = Paper feed position errorE35 15 = USB Host VBUD overcurrent error – USBE37 17 = Abnormal motor driver errorE40 20 = Other hardware errorE42 22 = Scanner error

MERESET WASTE INK COUNTER PADA CANON MP160 DAN MP1451. Matikan printer (kabel power masih tercolok), tekan dan tahan tombol STOP/RESET kemudian tekan tombol ON/OFF2. Tahan tombol ON/OFF, tekan tombol STOP/RESET 2x3. Lepaskan kedua tombol dan printer akan masuk ke SERVICE MODE4. Printer akan charging5. Setelah printer selesai charging, tekan tombol STOP/RESET 4x.6. Setiap kali tombol STOP/RESET ditekan, lampu ON/OFF akan berubah warna hijau dan oranye.7. Matikan printer dan cabut kabel POWER.8. Hidupkan kembali printer

Kode Error Canon MP160 dan MP145E2-2 = No paper (ASF)E3-3 = Paper jamE4 = No inkE5-5 = The ink cartridges are not installed or a non-supported ink cartridge is installed, or the ink cartridges are not installed properlyE8 = Waste ink absorber full, or platen waste ink absorber fullE9 = The connected digital camera / video camera does not support Camera Direct PrintingE14 = The Ink cartridges whose destination are wrong

E15 = Ink cartridge is not installed E16 – Ink remaining is unknownE16 -E19 = Failed to scan head alignment sheetE22 = Carriage errorE23 = Paper feed errorE24 = Purge unit errorE25 = ASF(cam) sensor errorE26 = Internal temperature rise errorE27 = Waste ink absorber full or platen waste ink absorber fullE28 = Ink cartridge temperature rise error -E29 = EEPROM errorE33 = Paper feed position errorE35 15 = USB Host VBUD overcurrent error – USBE37 17 = Abnormal motor driver errorE40 20 = Other hardware errorE42 22 = Scanner error

MERESET WASTE INK COUNTER PADA CANON MP160 DAN MP145

1. Matikan printer (kabel power masih tercolok), tekan dan tahan tombol

STOP/RESET kemudian tekan tombol ON/OFF

2. Tahan tombol ON/OFF, tekan tombol STOP/RESET 2x

3. Lepaskan kedua tombol dan printer akan masuk ke SERVICE MODE

4. Printer akan charging

5. Setelah printer selesai charging, tekan tombol STOP/RESET 4x.

6. Setiap kali tombol STOP/RESET ditekan, lampu ON/OFF akan berubah

warna hijau dan oranye.

7. Matikan printer dan cabut kabel POWER.

8. Hidupkan kembali printer