Solutions for: The Refining Industry · Our primary product offering to the refinery industry is comprised of heavyweight and lightweight belt (grade I & II as well as specialty compounds),

Solutions for:

The Refining Industry

2

WhyLewis-Goetz?

SOME OF THE

OUR DECADES OF INDUSTRY EXPERIENCE,

DELIVER SYSTEM ENGINEERED SOLUTIONS FROM THE MOST REPUTABLE MANUFACTURERS, PROVIDE HIGH-PERFORMANCE ALTERNATIVES, REPAIR AND

RECLAMATION SERVICES.

OUR COMMITMENT TO PRODUCT SAFETY AND SUSTAINABILITY THAT REDUCES OUR CUSTOMERS

TOTAL COST OF OWNERSHIP BY INCREASING THE

PRODUCTS LIFESPAN.

OUR PROACTIVE SERVICE WHICH IS

BACKED BY OUR NORTH AMERICAN GEOGRAPHIC FOOTPRINT OF NEARLY

100 LOCATIONS ALLOWS US TO PROVIDE

IMMEDIATE 24/7 ON-SITE DIAGNOSTIC AND PREVENTATIVE SERVICE, LOCAL EMERGENCY

RESPONSE AND FASTER DELIVERY TIMES.

*We have an average sales staff tenure of nine years.

(OR $785K PER CUSTOMER) THE LONG TIME TENURE OF OUR

SPECIALISTSWE HAVE ON STAFF HAVEPROVEN THAT THEY CAN

SOLVE THEIR PROBLEMS BEFORE THEY BECOME EMERGENCIES.

MILLION DOLLARS

WE HAVE DOCUMENTED A SAVINGS TO OUR REFINERY CUSTOMERS OF

WORLD’S LARGESTREFINERIES

TRUST

IN-DEPTH

KNOWLEDGE

PRODUCTS,

AND THEIR APPLICATIONS

TO PROVIDE THEM WITH

UNIQUE

THEIR CONFIDENCE

MARKET ADVANTAGES.

IS ROOTED IN OUR ABILITY TO:

OF OUR

IN THE LAST SEVEN YEARS.You can view specific refinery industry savings by visiting www.Lewis-Goetz.com and using our tool.

24/7

$8.6*

ONE OF THE LARGEST REFINERIES

IN THE U.S. WROTE TO

THANK US

FOR A MASSIVE TURNAROUND AND CAPITAL PROJECT THAT

WE WERE INVOLVED IN.

THE NOTE READ AS FOLLOWS:

We Are Active Members of Top Accredited Associations

We are also ranked as a market leader in Modern Distribution Management:

3

I just wanted to take the time to

thank all of your personnel for the

‘great service’ that we received

during this fall turnaround. Everyone

gave their all (110%) to supply the

needed material and service requested.

I personally and truly appreciate all

of your efforts. It makes my job so

much better/easier. Once again...

thank you!

Lewis-Goetz?

DELIVER SYSTEM ENGINEERED SOLUTIONS FROM THE MOST REPUTABLE MANUFACTURERS, PROVIDE HIGH-PERFORMANCE ALTERNATIVES, REPAIR AND

RECLAMATION SERVICES.

IS ROOTED IN OUR ABILITY TO:

4

Refinery Overview:

Bringing the parts together.

Crude

AtmosphericDistillation

Vacuum Distillation

Utilities

Wastewater

Hydroheater

Isomerization

Tank Farm

Tank Farm

Tank Farm

Tank Farm

Tank Farm

Hydrocracker

Catalytic Reformer

Alkylation

FCC Feed Hydrotreater Fluid Catalytic Cracker

Coker

Refinery overview –Bringing the parts together.

5

Refinery Unit KAG™ CGG™ ALKY-ONE Spiral-wound HDLE Double Jacketed GrafTech 2110* 2120* 2078* 978-C* NA-60*

Atmospheric Distillation

Vacuum Distillation

Hydrocracker

Hydrotreater

Coker

Alkylation

Isomerization

FCC Feed Hydrotreater

Fluid Catalytic Cracker

Catalytic Reformer

Tank Farm

Wastwater

Utilities

*Temperature/Media/Pressure Dependent

Refinery Unit Steam Hose Hydrocarbon Drain Hose Nitrogen Hose Chemical Hose Air Hose Water Hose

Atmospheric Distillation

Vacuum Distillation

Hydrocracker

Hydrotreater

Coker

Alkylation

Isomerization

FCC Feed Hydrotreater

Fluid Catalytic Cracker

Catalytic Reformer

Tank Farm

Wastwater

Utilities

Products

Gasketing Selection

Hose Selection

Products

6

Camprofile Gaskets offer the compressibility of a sheet gasket for low sealing stress, the bolt tightness of a

spiral wound gasket, along with the handling ease of a solid metal gasket and its resistance to buckling. They are

designed for the most difficult sealing environments where performance is critical or sealing stresses are low, and

are offered as a high-quality sealing alternative solution for emission control.

Camprofile Gaskets

Style: KAG™

Corrugated Metal Graphite Gaskets are high-performance gaskets for heat exchanger applications. The CMG

molds in place by filling in irregularities of the spaces creating a superior seal. It maintains the seal even in harsh

environments, including hydrocarbons and steam applications. The gasket is ideal where low bolt loads are present

or where high gasket stresses are available. The thin profile is beneficial in areas where flange separation is limited.

The heavy core and pitch frequency results in superior recovery and crush resistance in the most demanding

applications, an economic solution for emission control.

Corrugated Metal Graphite Gaskets

Style: CGG™

The most advanced gasket for Hydrofluoric Acid Service. Five times as much deformation of the barrier pillow,

giving better conformance to the flanges to eliminate flange corrosion. Seals with half the bolt load required by

other gaskets and nearly three times as much gasket seating stress at full bolt loads. Proven Fire-Safe to API 6FB by

Yarmouth Research Lab.

Alky Gaskets

Style: ALKY-ONE

Spiral-wound Gaskets were developed specifically to handle the severe temperatures and pressures found in a

refinery. These gaskets are engineered to be flexible and to recover when confronted with pressure, temperature

fluctuations, bolt stress, relaxation and creep. These gaskets can be used with almost every known corrosive and

toxic media. Spiral-wound Gaskets with an inner ring prevent inward buckling of the winding from entering the

process stream.

Spiral-wound Gaskets

Styles: SRI & SR

Double Jacketed Gaskets offer greater compressibility and resilience than a solid metal gasket due to the enclosed

soft filler. The two piece metal construction also provides extra rigidity allowing for large diameters. Double Jacketed

Gaskets are used on boiler and heat exchanger applications when ample bolting is available to correctly seat the

gasket. They are designed for high pressure and temperature applications.

Double Jacketed Gaskets

Style: 23

Metal Gaskets

Style SRI Spiral-wound gasket constructed with high density >98% purity inhibited grade graphite that extends

slightly above the metal windings and wound with metal filler to a specific pressure setting on the windings to

ensure uniform compression under high load creating a low emission seal without crushing the sealing element.

HDLE Gasket

Style: High Density Low Emission Spiral Wound Gasket

7

Soft Gaskets

From precision pipe threads to large valves and flanges, GRAFOIL® Flexible Graphite create a superior seal.

GRAFOIL® products fill pits, gouges and microscopic irregularities under only moderate bolt loads, leaving no open

spaces – or voids for leak path improvement. Even the most demanding industrial, chemical and petrochemical

sealing applications can benefit from GRAFOIL® products.

Flexible Graphite

Style: GrafTech/GRAFOIL®

Biaxially Oriented gaskets make for a less porous gasket and enhanced compressibility. This process also allows us

to manufacture a gasket with increased bolt load retention, reduced creep and excellent sealability at low stress.

They are specially designed for use in low bolt loaded constructions, and therefore, are extremely suitable for glass,

ceramics and plastic lined or distorted flanges and even flanges with light surface irregularities.

Biaxially Oriented PTFE Sheet with Hollow Glass Microspheres

Style: 2110

Biaxially Oriented gaskets make for a less porous gasket and enhanced compressibility. This process also allows us

to manufacture a gasket with increased bolt load retention, reduced creep and excellent sealability at low stress.

A general purpose grade for sealing applications across the whole pH-range. Particularly suitable for use with

hydrofluoric acid, but not pure hydrogen fluoride. It can be used with alkalis, solvents, fuels, water, steam

and chlorine.

Biaxially Oriented PTFE Sheet with Barium Sulfate Filler

Style: 2120

Made of good quality material based on a blend of aramid and inorganic fibers bonded with high quality

nitrile rubber. General purpose material suitable for use in a wide range of applications, including hot and

cold water, steam, oils, fuels, gases and a wide range of general chemicals.

Compressed NBR/Aramid/Inorganic Fiber Sheet

Style: 978-C

NBR/Aramid fiber is compressed gasket sheet made with all the great features of premium gasket materials without

the cost. Nothing is left out, only the best raw materials are used, without compromise. It exhibits a broad chemical

resistance, excellent cutability and flexibility. NA-60 is recommended for general service gaskets on all machinery

and process piping and equipment.

Compressed NBR/Aramid Fiber Sheet

Style: NA-60

Compressed NBR/Carbon Fiber Sheet Gaskets possess excellent creep resistance and are suitable for use with oils,

fuels and refrigerants. They are a universal grade especially suitable for use under alkaline conditions, with good

steam resistance and can also be used for general service gaskets on all machinery, process piping and equipment.

Compressed NBR/Carbon Fiber Sheet

Style: 2078

8

For all your isolation and hydro requirements! (Isolation blinds are not intended for pressurized services or hydrotest). Unless specified,

isolation blinds are 1/4” to 3/8” carbon steel. Blinds for hydrotest are available with thickness per ASME and API.

Blinds

Style: Paddle and Spectacle

Keeps cold air out and hot air in your furnaces. Full top-to-bottom zipper prevents gapping throughout thermal cycle. Inner and outer

flaps overlap to protect the zipper and D-Ring Buckle keeps outer flap closed. Abrasion-resistant Silica tape protects the top and

bottom hems.

Tube/Coker/Reformer Seals

Blinds/Tube/Coker/Reformer Seals/ Conveyor Solutions

Tube Seal Coker Seals Reformer Seals

We have a variety of conveyor system components and management programs to meet the needs of your plant. Our primary product

offering to the refinery industry is comprised of heavyweight and lightweight belt (grade I & II as well as specialty compounds), bucket

elevator belt and a variety of accessories including impact rollers, impact beds, belt cleaners, pulleys, idlers, lagging and chute lining.

We also have conveyor-system service teams throughout the U.S. and Canada that provide a variety of installation, troubleshooting and

preventative maintenance services. These crews are fully equipped to mobilize and respond to your conveyor systems needs 24/7.

Conveyor Solutions

9

Hoses

Steam Hose

Goodall “Super Inferno” Steam Hose

Tube: Chlorbutyl Resistant to Blisters & “Popcorning”

Reinforcement: High Tensile Steel Wire Braids Coated to Resist Corrosion & Enhance Adhesion

Cover: Red EPDM Resistant to Heat, Abrasion & Weathering;

Black Lazy Mylar Spiral for Ease of Identification

Suggested Fittings: Crimped Male & Female or Bolt On Clamps with

Male & Female, “Boss Style” Fittings

Temperature Ranges: -40°F to 450°F (-20°C to 232°C)

Working Pressure: 250 psi, 20 to 1 Safety Factor

Applications: Transfer of steam and/or hot water in virtually any application.

Goodall “Dante” Steam Hose

Tube: Robust Chlorbutyl Tube Formulated to Resist Blisters & “Popcorning”

Reinforcement: High Tensile Steel Wire Braids Coated to Resist Corrosion & Enhance Adhesion

Cover: Red Thick High-Grade EPDM Resistant to Heat, Abrasion & Weathering.

Black Spiral for Ease of Identification.

Suggested Fittings: Bolt On Clamps with Male & Female, “Boss Style” Fittings

Temperature Ranges: -40°F to 450°F (-20°C to 232°C)

Working Pressure: 250 psi

Applications: Transfer of steam and/or hot water in virtually any application.

I.D. O.D.Maximum

Working PressureMinimum

Burst PressureMinimum

Bend Radius Weight Standard Length

Nominal

Bore

mm in. mm in. bar psi bar psi mm in. kg/m lb./ft. mm ft.

19.05 0.75 32.26 1.27 17.24 250 344.74 5,000 101.60 4 0.92 0.62 76.20 250

25.40 1 39.37 1.55 17.24 250 344.74 5,000 127 5 1.32 0.89 76.20 250

I.D. O.D.Maximum




Nominal

Bore


12.70 0.50 27.69 1.09 17.24 250 172.37 2,500 76.20 3 0.79 0.53 76.20 250

19.05 0.75 33.27 1.31 17.24 250 172.37 2,500 114.30 4.50 0.98 0.66 76.20 250

25.40 1 40.39 1.59 17.24 250 172.37 2,500 127 5 1.28 0.86 76.20 250

31.75 1.25 49.78 1.96 17.24 250 172.37 2,500 152.40 6 1.80 1.21 30.48 100

38.10 1.50 55.12 2.17 17.24 250 172.37 2,500 177.80 7 2.07 1.39 30.48 100

50.80 2 68.58 2.70 17.24 250 172.37 2,500 254 10 2.71 1.82 30.48 100

63.50 2.50 84.33 3.32 17.24 250 172.37 2,500 330.20 13 4.02 2.70 30.48 100

76.20 3 99.06 3.90 17.24 250 172.37 2,500 406.40 16 5.58 3.75 30.48 100

101.60 4 123.70 4.87 17.24 250 172.37 2,500 508 20 6.79 4.56 30.48 100

Blinds/Tube/Coker/Reformer Seals/ Conveyor Solutions

Goodall “Nitro” Nitrogen Hose

Tube: Proprietary PVC/Nitrile (NBR) Blend

Reinforcement: High Tensile, Polyester Yarn

Cover: Blue or Purple Synthetic Weather, Petroleum & Ozone Resistant High

Visibility PVC/Nitrile (NBR) Blend

Suggested Fittings: Swaged, Crimped or Band Clamp Type

Temperature Ranges: -20°F to 150°F (-28ºC to 65ºC)


Applications: For use in nitrogen service to purge lines in refineries, petrochemical and general industries.

10

Hoses

Steam Hose

Goodall “Thermoflex” Steam Hose

Tube: High-Grade Heat Resistant EPDM

Reinforcement: Carbon Steel Wire Braids

Cover: Black High Grade EPDM with Wrap Impression, Resistant to Heat, Abrasion & Weathering

Suggested Fittings: Bolt On Clamps with Male & Female, “Boss Style” Fittings. Crimped Style Fittings Available for the 3/4 in. Only.

Temperature Ranges: -40ºF to 450ºF (-20°C to 232°C)


Applications: Transfer of steam and/or hot water.

Nitrogen Hose

I.D. O.D.Maximum

Working Pressure

MinimumWorking Pressure

68ºF, psiMinimum

Bend Radius WeightNumber of Plies

Nominal

Bore

mm in. mm in. bar psi bar psi mm in. kg/m lb./ft.

19.05 0.75 29.97 1.18 20.68 300 82.74 1,200 177.8 7 0.57 0.38 4 4

Nitrogen Gas Hose

I.D. O.D.Maximum




Nominal

Bore


12.70 0.50 25.65 1.01 17.24 250 172.37 2,500 76.20 3 0.55 0.37 76.20 250

19.05 0.75 32.36 1.27 17.24 250 172.37 2,500 101.60 4 0.74 0.50 76.20 250

25.40 1 39.37 1.55 17.24 250 172.37 2,500 127 5 1.03 0.69 76.20 250

38.10 1.50 51.82 2.04 17.24 250 172.37 2,500 177.80 7 1.49 1 30.48 100

50.8 2 66.55 2.62 17.24 250 172.37 2,500 254 10 2.37 1.59 30.48 100

11

Hoses

Hydrocarbon Drain Hose

Goodall “Super Dragon” Hydrocarbon Drain Hose

Tube: Specially Blended Nitrile to Resist Hot Hydrocarbons

Reinforcement: Braided Wire & Synthetic Textile for Strength & Durability

Cover: Blue Hypalon for Heat, Ozone & Chemical Resistance; White Spiral

Stripe for Ease of Identification

Suggested Fittings: Crimped or Clamped Shank Type Couplers (please consult fitting manufacturer for best application)

Temperature Ranges: -40°F to 250°F, Intermittent to 350°F (-40ºC to 121ºC, Intermittent to 176ºC)


Applications: The best solution for draining hydrocarbons from tanks, vessels and piping in petrochemical type operations.

5 to 1 safety factor (2,500 psi burst for new assemblies).

Goodall “Blue Dragon” Hydrocarbon Drain Hose

Tube: Specially Blended Neoprene to Resist Hot Hydrocarbons

Reinforcement: Braided Wire & Synthetic Textile for Strength & Durability

Cover: Blue Hypalon for Heat, Ozone & Chemical Resistance; Green Stripe

for Ease of Identification

Suggested Fittings: Crimped or Clamped Shank Type Couplers (please consult fitting

manufacturer for best application)Temperature

Ranges: -40°F to 250°F (-40ºC to 121ºC)


Applications: A better solution for draining hydrocarbons from tanks, vessels and piping in petrochemical type operations.

5 to 1 safety factor (1,500 psi burst for new assemblies). Also available on request, Green Dragon.

I.D. O.D.Maximum




Nominal

Bore


12.70 0.50 25.91 1.02 34.47 500 172.37 2,500 50.80 2 0.62 0.42 76.20 250

19.05 0.75 32 1.26 34.47 500 172.37 2,500 63.50 2.50 0.80 0.54 76.20 250

25.40 1 39.88 1.57 34.47 500 172.37 2,500 76.20 3 1.15 0.77 76.20 250

I.D. O.D.Maximum




Nominal

Bore


19.05 0.75 30.48 1.20 20.68 300 103.42 1,500 101.60 4 0.65 0.44 76.20 250

25.40 1 39.88 1.57 20.68 300 103.42 1,500 127 5 1.13 0.76 76.20 250

Your local Lewis-Goetz and ERIKS Canada division stocks a wide variety of this type of product in red, black and green as well as other colors (Titon or Air Hammer) and can cut and couple to your requirements

12

Hoses

Chemical Suction & Discharge Hose

Goodall “Super Kemflex ”Chemical Transfer Hose

Tube: Clear Ultra High Molecular Weight Polyethylene (UHMPE)

Reinforcement: High Tensile Textile Braids with Dual Monofilament Plastic

Helix & Static Wires

Cover: Abrasion & Ozone Resistant EPDM Standard Green with Yellow

Longitudinal Stripe

Suggested Fittings: Cam & Groove, Shank Type, Crimped On

Temperature Ranges: -40ºF to 180ºF (-40ºC to 82ºC)


Applications: Provides the ultimate in kink and crush resistance, flexibility, ease of handling and performance with aggressive chemicals.

4 to 1 safety factor (800 psi burst for new assemblies).

Air & Water Utility Hoses

I.D. O.D.Maximum


Burst Pressure Vacuum RatingMinimum


Nominal

Bore

mm in. mm in. bar psi bar psi mm in.,HG mm in. kg/m lb./ft. mm ft.

19.05 0.75 34.04 1.34 13.79 200 55.16 800 736.60 29 76.20 3 0.64 0.43 30.48 100

25.40 1 40.39 1.59 13.79 200 55.16 800 736.60 29 101.60 4 0.76 0.51 30.48 100

31.75 1.25 47.75 1.88 13.79 200 55.16 800 736.60 29 127 5 0.94 0.63 30.48 100

38.10 1.50 52.83 2.08 13.79 200 55.16 800 736.60 29 152.40 6 1.09 0.73 30.48 100

50.80 2 66.04 2.60 13.79 200 55.16 800 736.60 29 177.80 7 1.41 0.95 30.48 100

63.50 2.50 81.28 3.20 13.79 200 55.16 800 736.60 29 228.60 9 2.05 1.38 30.48 100

76.20 3 95.25 3.75 13.79 200 55.16 800 736.60 29 254 10 2.65 1.78 30.48 100

101.60 4 121.67 4.79 13.79 200 55.16 800 736.60 29 508 20 3.71 2.49 30.48 100

1. Lewis-Goetz personnel conducts a plant survey of all hose/fitting applications2. Then presents summary of findings and recommendations to all concerned parties3. Implements changes and provides training for all (operations, maintenance and plant contractors)4. Document savings based on engineered changes recommended

Maintenance Management Hose Program

13

Fittings & Accessories

Your local Lewis-Goetz and ERIKS Canada division stocks many different items to meet your exacting needs, some examples are shown below:

Complete Range of Camlocks Dual Lock Couplings

Ground Joint Style Air & Water Styles

Bowe Style Single Lock Whip Checks

14

Valves & Fittings

Gate Valves

1 In. Gate Valve

Stainless

Flanged End

Class 150

2 In. Gate Valve 600RF12SH

Flanged End

Class 600

3 In. Gate Valve 301RF8

Flanged End

Class 300

Forge Steel Gate Valves

Sizes Available: 0.25-2 in.

Conventional Port

Class 800

Glove Valves

Forge Steel OS&Y Globe Valves


Class 800

Check Valves

4 In. Check Valve 152RF8

Flanged End

Class 150

15

2 In. Gate Valve 600RF12SH

Flanged End

Class 600

Forge Steel Gate Valves


Conventional Port

Class 800

4 In. Check Valve 152RF8

Flanged End

Class 150

www.lewis-goetz.com

Please Contact Your Local Division for More Information

May 2015

Lewis-Goetz also services the following industries:

• Aggregate

• Agriculture

• Chemical Processing

• Construction

• Food Processing

• Government

• Manufacturing

• Mining

• Oil & Gas

• Package Handling

• Petroleum Dispensing

• Pharmaceutical

• Power Generation

• Pulp and Paper/Wood

• Rental

• Steel

• Tire

• Transport/Bulk Hauling

Documents

Solutions for: The Refining Industry · Our primary product offering to the refinery industry is comprised of heavyweight and lightweight belt (grade I & II as well as specialty compounds),