GEOPROBE®

SONIC

2

need caption about samples ....

• POWER OPTIONS ... Geoprobe® designs & builds sonic heads

• SPECIALIZED SONIC TOOLING ... in stock & ready for distribution

• COMPREHENSIVE SONIC TRAINING ... operation, maintenance, use of rigs & tooling

• SERVICE SUPPORT ... unmatched in the drilling industry

8-in. sample cores taken by an 8x10 method with an 8150LS.

Get Big Sonic Powerfrom Geoprobe Systems®

3

8150LS 8140LS 8140LC

8150LS 8140LS 8140LCWidth (in) 90 85 80Length (transport) (in) 300 298 186Length (deployed, lateral fully retracted) (in) 240 185 185Length (deployed, lateral fully retracted, rod handler deployed) (in) 314 270 271Height (normal transport) (in) 114 114 110Height (deployed; winch mast up) (in) 310 298 249Height (min standard working height) (in) NA NA 192Extension (fore and aft) (in) 6 11 15Lateral (side to side) ±3.5 in NA ±8 degreesDrill Mast Dump (in) 36 NA 25Base Unit Weight (lbs) 29,000 22,900 19,350Head Travel (in) 157 157 92Head Crowd/Pull Force (lbs) 20,000 20,000 20,000Head Feed Carriage Rollers Comp. slides Comp. slidesHead Feed Pressure Control (w.o.b) Standard Optional OptionalHead Sideshift (in) 32 26 26Head tilt out: (degrees) 90 25 25Outrigger travel (in) 26 26 16 front/26 rearEngine CAT C6.6 Tier 3 Flex CAT C4.4 Tier 3 Flex CAT C4.4 Tier 3 FlexEngine Rated Power (hp) 225 142 142HP limited pump Max pressure (psi) 4,000 4,000 4,000 Max flow (gpm) 100 100 100Hydrostatic pump Max pressure (psi) 5000 NA NA Max flow (gpm) 55 NA NAFuel Capacity (gal) 90 40 40Max angle drilling ability off vertical (degrees) 45 NA 45Approach/departure angle in transport (degrees) 24 24 24Ground Speed (mph) 1.5 1.5 2.5Electronic Controls V2 V1 V1Sonic head GV5 GV4 GV4Max oscillator speed (Hz) 150 130 130 Dynamic force @ max oscillator speed (lbf) 50,000 33,000 33,000 Rotation (high torque/low speed) (lbf/rpm) 4,000/90 4,000/80 4,000/80 Rotation (low torque/high speed) (lbf/rpm) 2,500/140 2,500/120 2,500/120Standard Winch Line pull (lbf) 2000 2000 2000 Line speed (fpm) 110 110 110Triplex water pump Max pressure (psi) 1000 1000 1000 Max flow (gpm) 25 25 25Double wrench breakout Clamp force (lbf) 0 to 21,000 0 to 21,000 0 to 21,000 Breakout torque (ft-lbf) 13,500 13,500 13,500 Casing size compatible (in) 2 to 14 2 to 12 2 to 12 Vertical travel (in) 9 9 9

Collecting core samples at a mining site with an 8140LS.

An 11-ft. SDT45 (sonic dual tube 4.5 in. OD) sample sheath is positioned for

sample extraction from the 8140LS. The sampler is coupled to the sonic

spindle with the SDT45 Spindle Connect Drive Head.

4

Understanding the operations of the sonic rig and providing fast and knowledgeable service is the goal of the Geoprobe® Service Team. This industry-leading service team works closely with the engineering design team to make sure repairs and

maintenance issues are handled correctly.

The 8150LS full-sized sonic rig fits inside a 40 ft. shipping container for convenient international transportation.

Get Success in the Fieldfrom Geoprobe® Engineering

The 8150LS full-sized rotary sonic rig with GV5 sonic head, adjustable control panel, and rod handling system.

An 8140LS is used to install five 4.0 in. dual phase recovery wells set adjacent to a sea wall which required the use of a 300-ton crane to lift and position the rotary sonic rig. A network of aboveground gas pipelines had to be cleared which dictated the need for the crane lift.

The adjustable swing-arm control panel has an intuitive layout that allows the operator to perform multiple tasks effortlessly. Speeds, feeds, and pumps can be precisely dialed in with the electronic controls. The control panel’s ability to swing freely from the rig lets the operator be in the position needed to help align a rod or to be at a comfortable distance away from a spinning drill string. An integrated Systems Display on the control panel provides real-time systems analysis and a suite of built-in diagnostic tools. Also included are system safeguards that protect the main engine and hydraulic components when important operational parameters are compromised. It’s all there to assist the rig operator.

55

One feature of the Geoprobe® sonic heads is their centerline sideshift function which moves the head to the side so you

can work the inside diameter of the rod without moving the foot or re-positioning the machine.

The GV5 sonic head (shown) on the 8150LS and the GV4 sonic heads on the 8140LS and

8140LC are designed, built and serviced by Team Geoprobe® at our Kansas manufacturing facility.

Geoprobe® engineers researched and tested heads for nearly ten years before introducing

the heads to the market.

An 8140LS with the patented GV4 Sonic Head and a DH104 Automatic Drop Hammer.

6

Get Quality Results ...with Geoprobe® Sonic Tooling Systems

SDT60 soil cores of shale, limestone and gypsum taken from 100 to 200 ft. bgs. The Geoprobe® sonic product line offers the widest array of bits and sampling systems available; from conventional telescoping soil coring to dual tube sampling or full face bits when a sample isn’t needed. Our tooling engineers are constantly improving and refining our sonic offerings.

Design It. Test It. Manufacture It.The Geoprobe® sonic product line offers you

the widest array of bits and sampling systems

available; from conventional telescoping soil

coring to dual tubing and face flushing bits for

rock coring. Our sonic tool joints are engineered

for ease of make-up and break-out with no galling

or deforming in the thread area. Field operators

report they can immediately tell the difference.

Onsite with an 8140LC at an undisclosed UST site.

7

Geoprobe® Sonic Tooling• In Stock and Ready for Distribution• Aircraft Grade Alloy Steel• Exclusive Sonic Dual Tube Systems• For Use With ALL Sonic Machines• For Traditional Sonic Drilling Methods 3.5 in. to 10.0 in. Sonic Casing Sizes in 5 ft. & 10 ft. lengths

Investments Key To Superior Products.Our goal is to design superior products that improve existing technology, and to develop

new technology that increases efficiency and improve results in the field.

The investment the company has made in engineering staff, new

manufacturing processes, high-quality raw materials (aircraft-

quality steel is used for Geoprobe® sonic tooling), and

extensive field testing across the U.S.,

underscores the company’s

commitment to providing

superior sonic tooling

products.Geoprobe® nested sonic casing and bits available and ready for distribution in

sizes 3.5 in. (not pictured), 4.5 in., 6 in., 8 in. and 10 in.

A field team in New Zealand used an 8140LC rotary sonic and SDT45 tooling to retrieve samples of mostly cobble-sized Greywacke. The filled liners contained vesicular Basalt rock.

4.5 in. granite cores taken by an 8140LS in 6 in. and 12 in. runs through solid granite to 42 feet.

Our Customer Service Team welcomes all calls and inquiries about the capabilities and availability of any of our

Geoprobe® machines.

Geoprobe® and Geoprobe Systems® are registered trademarks of Kejr Inc.

Copyright© 2015

Geoprobe Systems®

geoprobe.com1835 Wall Street • Salina KS 67401

1-800-436-7762 • 785-825-1842