Ramset is unique in the world of construction tools, fasteners and sealant manufacturing. Overall, 98% of Ramset fasteners and accessories are made in the USA.

Sound Control Sealant SC200

Features and Benefits• Cross line and plumb points all inone easy to use laser

• Locking mechanism (pendulum lock) increases the durability and preserves calibration

• Locked line mode allows for more complicated layouts; i.e., sloped areas, tile patterns

• Audible out-of-level alert

• Rugged rubber housing protects precision laser components

Applications• Drywall track layout

• Trim, windows and door frames

• Soffits

• Suspended ceiings

The RL510 is a fully automatic rotating laser that can be used for leveling, vertical alignment,

plumbing and squaring. Applications include installing suspended ceilings, soffits, stud & track

layout and a variety of interior alignment tasks.

Advanced Features• Integrated motorized wall mount adjustable by remote control

• Automatic self leveling in both horizontal and vertical modes

• Manual leveling mode for slopes or inclined planes

• Choice of beams: Rotating, Scanning, Chalk line

• Easy field calibration

RL510 LASeR

DRywALL SyStemS

Ramset Sound Control Sealant is used to

reduce sound transmission and increase

acoustical performance in gypsum wall

board partition systems. Adheres firmly

to wood, metal, concrete and gypsum

drywall surfaces. Ramset sound Control

Sealant bridges gaps and building material

irregularities up to 3/8” wide and 3/8” deep.

LongeR LiFe 160 hours on two D alkalines

40 hours on rechargeable NiCad

SAVe time Built in wALL moUnt

virtually eliminates setup

See tHe LigHt Laser target allows you to use in high ambient light applications

HAnDS FRee Remote allows you to adjust the

laser from where you work ITW Ramset700 High Grove Blvd., Glendale Heights, IL 60139Phone: 630.825.7900 Fax: 630.893.12701.800.RAMSET6 (1.800.726.7386) www.ramset.com

Specifications• Leed EQ Credit 4.1: Low-Emiting

Materials: Adhesive & Sealants

• Meets ASTM E84, C919, E90

• 0/0 Flame and Smoke Spread Rating

• UL Classified

• Waterbase formula

Revolutionary Universal StandThe stand is a tool unto itself that helps make the RL2+ the most versatile laser on the market today.

• Integrated laser stand works on studs and floor (patent pending)

• Magnetic: Powerful magnets easily secures to steel stud, even 25 gauge dimpled stud

• Stand works with 2” deep leg track

• Stand can bump the track to allow for plumb point alignment

Features and Benefits• Locking mechanism (pendulum lock) increases the durability

and preserves calibration

• Audible out-of-level alert

• Rugged rubber housing protects precision laser components

• Third beam can be turned off to increase battery life

Applications• Drywall track layout

• Trim, windows and door frames

walls & Ceilings

Fully Automatic Cordless gas Fastening System

The Power of the T3 allows you to consistently

shoot where no other gas tool has gone before. The

.125 diameter pin is specifically engineered to work in the

toughest concrete and steel where other pins cannot perform.

The new T3 system delivers power that rivals other gas and powder systems.

the most powerful tool in its classThe XT540's combination of high power and durability make it perfect for these applications:

• Driving 1-1/4” embedment for perimeter track

• Fastening track & clips to structural steel

• Track to hard concrete

As a commercial drywall framer, you’re responsible for the

entire project: front to back, top to bottom, inside and out. Since

each aspect of the job has it’s own unique challenge, your tool and

fastener combination may be the difference between success and failure.

That’s why when it comes to your drywall tools, look no further than

Ramset’s Drywall Systems.

Powerful new FeaturesThe Ramset T3 fastens into hard concrete and steel with ease using these engineered features:

• 25% more power

• Larger diameter pin (.125) for higher stick rate

• Deep leg track capability

• Easy push down force

• One step fuel injected system

• 15-pin strip, 45-pin magazine

• Improved battery system

Features• Fully automatic system with 150 nail capacity is 3-5 times faster than screws

• Aggressive, patented nail shank design provides high pullout performance

• Contoured bulge head style provides high pullover (wind) resistance

• Long life Climacoat ™ finish is 10 times more corrosion resistant than electro-zinc plating

Applications• Exterior Gypsum sheathing to steel framing

• Expanded metal lath to steel framing

• Woven wire mesh to steel framing

• Blocking

The XT540 was specifically designed for

the commercial framer for heavy-duty

interior & exterior applications.Ramset has always set the standard for Driving Jobsite Speed.

For attaching exterior sheathing to light gauge steel framing

3000-Shot rechargeable battery with easy off switch that locks into place to extend battery life

Features • No more increasing pin size to achieve required embedment

• Less wear and tear on tools and manpower

• Head stamps make for easy inspection

true embedment Fasteners

TR

UE EMBEDM

EN

T

RAMSET©

extreme Fastening

Features • Low recoil .27 caliber strip tool

• Dial down 2 full loads

• Ergonomically balanced

• Automatic piston return

• Trigger lock & hand guard to increase safety

• Capacity for up to 3” straight pin

How they work:For example, using the 1” .157 TE Pin, the actual embedment depth into the concrete is 1”. There is no longer a need to use a 1-1/4” pin for 1” embedment.

Concrete PinsSteel PinsRamset’s Power Point technology and unique pin design provides for easier penetration into hard steel reducing failures and increasing holding value.

.157".157"

1/16"1/16"

1-1/16"1-1/16"

True EmbedmentTrue Embedment1"1"

.157"

.545"