Upload
construction-equipment-guide
View
220
Download
3
Tags:
Embed Size (px)
DESCRIPTION
Southeast 22 2014
Citation preview
N.C. Firm’s Love of Crushing
Spans Generations…8
Cat Helps Move History in
Oak Ridge, Tenn. …28
Good Hope at Work on
I-22 in Jasper…12
Inside
“The Nation’s Best Read Construction Newspaper… Founded 1957.”
® SoutheastEdition
$3.00
Published Nationally
October 29, 2014 • Vol. XXVI • No.22 • 470 Maryland Drive • Ft. Washington, PA 19034 • 215-885-2900 • Toll Free 800-523-2200 • Fax 215-885-2910
www.constructionequipmentguide.com
By Cindy RileyCEG CORRESPONDENT
D’Iberville, Miss., is getting a major boostdue to the ongoing I-10/I-110 interchange modi-fication project. The construction, currently 70percent complete, includes the first split dia-mond interchange in Mississippi and the instal-lation of the first soil nail wall in the state. “The City of D’Iberville has been experienc-
ing an economic boom over the past few yearswith the addition of many retailers, restaurantsand dealerships around the I-10/I-110 inter-change,” said Michael Harter, MississippiDepartment of Transportation (MDOT) projectengineer. “This area shows signs of continuedeconomic growth and an increase in traffic on I-10. The economically driven infrastructure proj-ect will increase safety and alleviate traffic con-gestion.”The work has been funded through MDOT. A
total of $30 million comes from the MississippiDevelopment Authority, with $14 million fromthe Federal Highway Administration. “New access ramps will be built at multiple
locations around the existing interchange on I-
Gulf Equipment Corp. photoD’Iberville, Miss., is getting a majorboost, due to the ongoing I-10/I-110
interchange modification project.
I-10/I-110 Project to Sustain Economic Boom
Construction employers added 16,000 jobs and the sector’s unem-ployment rate fell to 7 percent, the lowest rate for September in years,according to an analysis released Oct. 3 by the Associated GeneralContractors of America. Association officials said the constructionemployment gains come as more firms report having a hard time find-ing enough qualified workers to fill available positions, citing the lackof local vocational training programs, especially at the secondarylevel.“While we are eager to see even more construction employment
gains, there is no denying the fact that the industry has been in recov-ery mode for much of the past three years,” said Stephen E. Sandherr,the association’s chief executive officer. “But the industry won’t beable to keep filling positions if there aren’t enough qualified workersavailable to fill them.”
Industry Employers Add16,000 Jobs in Sept.
With Oct. 1 marking the beginning of fiscal year 2015, the 31-mem-ber organization Transportation Construction Coalition (TCC) urgedCongress to find a way to pay for, and pass, a new long-term surfacetransportation measure as soon as possible. They cautioned that failureto act would lead to another self-imposed funding crisis that wouldundermine vital road, highway and transit repairs.“We worked hard to build broad consensus within a deeply-divided
Congress for investing in the nation’s aging roads, bridges and transitsystems,” said Stephen E. Sandherr, the chief executive officer of theAssociated General Contractors of America and the Coalition’s co-chair.“Members of Congress can either take advantage of that momentum or
Clock Ticks TowardYet Another HighwayTrust Fund Crisis
see FUND page 40
see INTERCHANGE page 44
see JOBS page 40
Table of Contents ................4
Crawler Loaders, Dozers,Undercarriages & PartsSection ..........................45-54
Paving Section..............56-67
Parts Section......................68
Auction Section............88-93
Business Calendar ............92
Advertisers Index ..............94
Page 2 • October 29, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
sdlgna.com/CEGSE
SOLID PERFORMANCE MADE SIMPLE.
LG938L
2.4 yd 3 Loader$99,500*
LG948L
3.0 yd 3 Loader$116,500*
LG958L
4.0 yd 3 Loader$134,500*
LG959
4.0 yd 3 Loader$144,500*
Introducing SDLG wheel loaders — where simplicity
Introducing SDLG wheel loaders — where simplicity
y leading pricing come and industr, reliability,Introducing SDLG wheel loaders — where simplicity
y leading pricing come
* Prices are subject to change without notice.
network of dealers,wer costs, lo,reliability
Stop in and get an up-c
They’re easy to operastandard.Introducing SDLG wheel loaders — where simplicity
Visit sdlgna.com for details.* Prices are subject to change without notice.
.sdlgna.com/CEGSE visit network of dealers,vings on to you. and pass the sawer costs,
and find out holose look,Stop in and get an up-c
easy to maintain,te,They’re easy to operaIntroducing SDLG wheel loaders — where simplicity
tion o or more informa a Fvings on to you.w SDLG uses design simplicity to improve and find out ho
and a perfect fit for your day-to-day jobs. easy to maintain,y leading pricing come and industr, reliability,Introducing SDLG wheel loaders — where simplicity
tion on SDLG and our w SDLG uses design simplicity to improve
and a perfect fit for your day-to-day jobs.y leading pricing come
423.308.7940 TNttanooga,Cha
919.661.8710 NCRaleigh,
252.754.5280 NCGreenville,
704.596.8283 NCCharlotte,
828.687.0620 NCAsheville,
912.964.8079 GAvannah,Sa
770.319.0074 GAark,orest PF
678.318.9500 GABuford,
864.704.1060 SCPiedmont,
803.791.0740 SCColumbia,
843.414.1120 SCCharleston,
865.525.1845 TNKnoxville,Buford, GA
678.318.9500
Forest Park, GA770.319.0074
Savannah, GA912.964.8079
Asheville, NC828.687.0620
Charlotte, NC704.596.8283
Greenville, NC252.754.5280
Raleigh, NC919.661.8710
Chattanooga, TN423.308.7940
Knoxville, TN865.525.1845
Charleston, SC843.414.1120
Columbia, SC803.791.0740
Piedmont, SC864.704.1060
Bismarck, ND701.250.4882
Fargo, ND701.271.2360
Minot, ND701.839.4020
Williston, ND701.570.5309
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2014 • Page 3
Your VOLVO dealer in:
North CarolinaCharlotteRaleighAshevilleGreenville
South CarolinaColumbiaNorth CharlestonPiedmont
GeorgiaBufordForest ParkSavannah
East TennesseeKnoxvilleChattanooga
North DakotaBismarckFargoMinotWilliston
Asphalt/Pavers/Concrete Equipment1987 BLAW-KNOX PF120H, 5952 Hrs ..........................................................$7,2222007 INGERSOLL RAND PF6110, 2809 Hrs ........................................$167,0002004 VOLVO PF5510, 148 Hrs ........................................................................$25,0002006 VOLVO PF6110, 2866 Hrs....................................................................$166,700(2) 2007 VOLVO PF6110, 2809-2994 Hrs ......................................$166,700 Ea.(2) 2008 VOLVO PF6110, 3258 Hrs ......................................$166,700-$167,0002011 VOLVO PF6110, 2288 Hrs....................................................................$206,000
Compactors-Smooth Drum2010 VOLVO DD112HF, 1771 Hrs..................................................................$88,9002008 VOLVO DD118HF, 2030 Hrs..................................................................$83,5002007 VOLVO DD90HF, 1753 Hrs ....................................................................$58,5002012 VOLVO SD116DX, 62 Hrs ....................................................................$116,700
Excavators-Crawler2006 HITACHI ZX240 LC-3, 8410 Hrs ........................................................$67,0002013 KOMATSU PC350 LC-8, 2437 Hrs ..................................................$222,3002013 KOMATSU PC360 LC-10, 740 Hrs ..................................................$278,0002008 VOLVO EC210C LC, 3063 Hrs ..........................................................$122,5002011 VOLVO EC210CL, 3505 Hrs................................................................$138,9002013 VOLVO EC220D, 2345 Hrs ..................................................................$144,500(4) 2013 VOLVO EC220DL, 6-2715 Hrs..............................$139,000-$150,0002008 VOLVO EC240CL, 6909 Hrs ..................................................................$93,5002011 VOLVO EC240CL, 2796 Hrs................................................................$150,0002012 VOLVO EC250D LR, 1341 Hrs ..........................................................$189,0002011 VOLVO EC250DL, 2778 Hrs................................................................$161,2502013 VOLVO EC250DL, 2000 Hrs................................................................$170,5002004 VOLVO EC330B, 5800 Hrs ....................................................................$52,777(2) 2011 VOLVO EC340DL, 3293-4400 Hrs......................$177,800-$184,000(6) 2012 VOLVO EC340DL, 1419-3728 Hrs......................$181,000-$214,500(3) 2013 VOLVO EC340DL, 1391-2428 Hrs......................$211,250-$220,0002013 VOLVO EC380DL, 2610 Hrs................................................................$222,0002011 VOLVO EC460C LC, 5735 Hrs ..........................................................$250,000(2) 2012 VOLVO EC480DL, 2637-2661 Hrs......................$291,500-$328,0002013 VOLVO EC480DL, 2599 Hrs................................................................$324,500
Excavators-Mini (up to 12,000 lbs)2004 VOLVO EC55, 6035 Hrs ..........................................................................$27,7772008 VOLVO EC55B, 4263 Hrs........................................................................$40,555
Excavators-Wheel(2) 2011 VOLVO EW180C, 2576-2933 Hrs........................$161,200-$166,7002012 VOLVO EW180D, 1785 Hrs..................................................................$194,500
Motor Graders2013 BLAW-KNOX G700, 321 Hrs ..............................................................$158,5002002 VOLVO G720 VHP, 2221 Hrs ................................................................$72,2252011 VOLVO G946, 1970 Hrs ........................................................................$211,2002011 VOLVO G946B, 1981 Hrs ....................................................................$211,200
Off-Highway Trucks2007 CATERPILLAR 725, 9247 Hrs ............................................................$123,3332004 VOLVO A25D, 6467 Hrs ........................................................................$206,0002011 VOLVO A25F, 4220 Hrs ........................................................................$242,000(3) 2012 VOLVO A25F, 2642-2952 Hrs ..................................$283,500-305,750(4) 2013 VOLVO A25F, 1249-1949 Hrs ..............................$286,000-$305,0002005 VOLVO A30D................................................................................SOLD $165,0002008 VOLVO A30E, 7445 Hrs ........................................................................$170,5002011 VOLVO A30E, 3185 Hrs ........................................................................$283,500(10) 2012 VOLVO A30F, 2344-3818 Hrs ............................$300,000-$328,0002012 VOLVO A30F ................................................................................SOLD $324,5002012 VOLVO A30F ................................................................................SOLD $328,000(3) 2013 VOLVO A30F, 1940-2896 Hrs ..............................$324,500-$330,0002014 VOLVO A30F, 1453 Hrs ........................................................................$328,600(2) 2012 VOLVO A35F, 2462-3300 Hrs ..............................$388,300-$415,0002010 VOLVO A40E, 3873 Hrs ........................................................................$339,200(11) 2011 VOLVO A40F, 2456-6571 Hrs ............................$319,000-$410,000(23) 2012 VOLVO A40F, 1577-6565 Hrs ............................$324,500-$447,0002012 VOLVO A40F ................................................................................SOLD $346,000(4) 2013 VOLVO A40F, 2429-4155 Hrs ..............................$388,300-$402,800(3) 2013 VOLVO A40F FS, 1631-2564 Hrs ......................$455,800-$494,750
Sweepers/Boom Equipment2012 BLAW-KNOX CB90, 145 Hrs ................................................................$51,7502012 BLAW-KNOX FB90, 242 Hrs ................................................................$58,500
Water Equipment - Truck2006 VOLVO A30D, 6864 Hrs ........................................................................$255,750
Wheel Loaders2006 VOLVO L110E ................................................................................SOLD $49,5002010 VOLVO L110F, 5170 Hrs ......................................................................$155,6002011 VOLVO L110F, 6865 Hrs ......................................................................$143,000(2) 2012 VOLVO L110G, 1535-3266 Hrs............................$200,000-$242,000(6) 2013 VOLVO L110G, 1066-2817 Hrs............................$209,000-$234,0002009 VOLVO L150F, 6938 Hrs ......................................................................$183,400(3) 2010 VOLVO L150F, 9601-11462 Hrs ..........................$133,400-$133,500(3) 2012 VOLVO L150G, 2676-3057 Hrs............................$267,000-$305,7502011 VOLVO L180G, 4842 Hrs......................................................................$278,0002013 VOLVO L180G, 2879 Hrs......................................................................$334,0002013 VOLVO L220G, 859 Hrs ........................................................................$413,400(2) 2012 VOLVO L250G, 2100-2699 Hrs............................$355,000-$399,0002003 VOLVO L50D, 7897 Hrs............................................................................$44,4442010 VOLVO L50F, 8049 Hrs ............................................................................$55,5552005 VOLVO L60E, 17059 Hrs ........................................................................$33,3332013 VOLVO L60G, 1468 Hrs ........................................................................$144,000(2) 2012 VOLVO L70G, 1850-3019 Hrs ..............................$144,500-$151,250(2) 2013 VOLVO L70G, 2692-2938 Hrs ............................................$147,000 Ea.2005 VOLVO L90E, 6801 Hrs ........................................................................$100,000(4) 2012 VOLVO L90G, 1625-2618 Hrs ..............................$183,000-$194,500(11) 2013 VOLVO L90G, 788-4261 Hrs ..............................$156,000-$192,500
2009 VOLVO L120F, 6911 Hrs ..................$155,600 2012 VOLVO L150G, 2674 Hrs ................$305,7502012 VOLVO L150G, 2765 Hrs ................$267,000
A40 Finance leasing available for 24 months with payments as low as $7,900 per month. Call Doug Wilson for details.
$
Full inventory at: www.ascvolvo.com
Doug Wilson 704-562-2032 Email: [email protected]
Billy Brice 678-318-9500Email: [email protected]
USED EQUIPMENT
Construction Equipment Guide Southeast Edition (ISSN 1058-6474) is published bi-weekly by Construction EquipmentGuide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates.
Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changesto Construction Equipment Guide Southeast Edition, 470 Maryland Dr, Ft. Washington, PA 19034.
Contents Copyrighted ©2014, by Construction Equipment Guide, which is a Registered Trademark, registered in theU.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced(including framing) in whole or part without written permission from the publisher. All editorial material, photo-graphs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyrightpurposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially.Contributor articles do not necessarily reflect the policy or opinions of this publication.
Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is notresponsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used inadvertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occasion-ally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.
SPECIAL SECTION45 CRAWLER LOADERS, DOZERS, UNDERCARRIAGES & PARTSBe sure to check out this special section! Keep up to date with the latest information on crawler loaders, dozers, undercarriages and parts.
FEATURES8 ARARAT ROCK PRODUCTS’ LOVE OF CRUSHINGSPANS GENERATIONSJames Crossingham IV, vice president of Ararat Rock Products Company, said that his grandfather started the company in 1955, and is still active in it at theage of 85.
12 GOOD HOPE CONTRACTING PAVES WAY ALONG I-22 IN JASPERWhen Good Hope began planning last spring to work on paving a 7.5 mi. (12 km) stretch of Interstate 22 in Jasper, about 40 mi. northwest of Birmingham,the company’s management realized that it needed to upgrade its stock of paving equipment.
20 JCB’S ROAD SHOW MAKES STOP AT MACKINNONJCB IN TAMPACustomers, local leaders and the community were invited to an open house atMacKinnon JCB in Tampa, Fla., as part of the road show with JCB’s highly specialized military backhoe loader, the HMEE (High Mobility Engineer Excavator)and its all-new commercial-purposed 3CX backhoe loader.
28 MOVING HISTORY IN OAK RIDGE, TENN.Eighteen years ago, when the city of Oak Ridge, Tenn., and its Japan sister city,Naka-Machi, hung an 8,250-pound symbolic bell in the American town’s center, itwasn’t likely that organizers were thinking about how to take it down.
30 HILLS MACHINERY CREATES STRONG PRESENCEWITH CHARLOTTE FACILITYThe new operation will serve customers in the Charlotte metro area and surrounding communities. The Charlotte operation will feature new, used andrental equipment, as well as heavy equipment services.
36 SUNBELT AG EXPO BOASTS MORE THAN 100,000ATTENDEES IN GA.Known by many as “North America’s Premier Farm Show,” this year’s expo had more than 1,200 exhibitors showcasing thousands of agricultural products and services.
38 FOUNDED IN 1947, J.H. WILLIAMS OIL COMPANYCONTINUES GROWTH IN FLA.Customer service is the key to success for any business, but for a family business like J.H. Williams Oil Company, it is a defining feature. It’s commitment to personal service, fast and easy access, and the promise of reliability and quality care.
68 LIUGONG MAKES ADDITIONSLiuGong North America has appointed Jake Huang as vice president of LiuGongNorth America.
76 KUBOTA TRACTOR CORPORATION TO SPONSORALAN JACKSON’S UPCOMING 2015 TOURKubota Tractor Corporation is joining Alan Jackson’s 25-year career celebration.The industry-leading tractor and equipment company has signed on as a sponsorof the country superstar’s upcoming 2015 tour.
76 HENRY ‘BUDDY’ SIMS PASSES AWAY AT AGE 91As all Martin & Martin customers and friends know, Mr. Sims was an integral part of the company’s auction family for many years. His presence will be missed by all.
82 PIRTEK SYSTEM TO RESTRAIN HOSES FROM‘WHIPPING EFFECT’ Safety is always the primary concern when operating hydraulic equipment andmachinery. If an end fitting becomes disconnected from a high-pressure hose, the release of energy contained inside can cause serious injury to anyone operating or working on the equipment.
EQUIPMENT56 HAMM Oscillatory Rollers58 BOMAG BMP8500 Articulated Multi-Purpose Compactor62 WIRTGEN W 250i Large Cold Milling Machine
DEPARTMENTS86 CLASSIFIEDS
88 COMING AUCTIONS
92 BUSINESS CALENDAR
SOUTHEAST EDITIONCirculated Throughout • Alabama • Arkansas • Florida • Georgia • Louisiana
• Mississippi • North Carolina • South Carolina • Tennessee • Virginia • Puerto Rico • Virgin Islands
Founder, Publisher & CEO Edwin M. McKeon Sr.Southeast Publisher Richard C. McKeon
Editor In Chief Craig Mongeau Associate Editor Christine Reckner
Editorial Consultant Pete Sigmund Production Mgr. John Pinkerton
Controller Tom WeinmannCirculation Mgr. Cathy Printz
Main office 470 Maryland Drive Fort Washington, PA 19034
215/885-2900Toll Free 800/523-2200
Fax 215/885-2910
Web site www.constructionequipmentguide.comEditorial e-mail [email protected]
Advertising e-mail [email protected]
For advertising rates Contact Richard C. McKeon• North & South Carolina• Tennessee •Virginia
704/553-8888Toll Free 800/288-4234
Fax 704/553-8899e-mail [email protected]
Kent HogeboomNational Sales Manager
315/866-1423Toll Free 800/988-1203
Fax 315/866-1379e-mail [email protected]
Contact Rich Olivier• Alabama • Arkansas • Georgia •Mississippi • Tennessee • Florida Panhandle
770/443-3174Toll Free 800/409-1479
Fax 770/443-3176e-mail [email protected]
Contact Jim Van Natta• Florida • Virgin Islands • Puerto Rico
407/365-5720Toll Free 800/344-3026
Fax 407/366-3192e-mail [email protected]
Contact Dale Agnew•Louisiana
Toll Free 877/877-4997 Fax 972/719-2611
e-mail [email protected]
Mobile LinkedIn Facebook Twitter YouTube
To read these stories and many more, visit www.constructionequipmentguide.com
IN THIS ISSUE ®
8 12 20
Page 4 • October 29, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2014 • Page 5
Page 6 • October 29, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
FIND OUT WHAT OTHERS KNOW. VISIT TAKEUCHI-US.COM TO FIND THE DEALER NEAREST YOU.
EXPERIENCE THE DIFFERENCETakeuchi o�ers the most innovative and advanced line of compact equipment on the planet. Come and see what everyone else is talking about. Experience Takeuchi — Visit your local dealer today.
ERIEPEX
I DEH TECNE
ECNREFFE
ERIEPEXhs tre�i ohcuekaT
e amo. Ctenale phte dlaoc lrou ysitiV
I DEH TECNEdd ane avitavonnt isoe me isle enoyrevt eahe wed sn
.yado tlerae
ECNREFFEt ecapmof ce ond liecnavd
. tuobg aniklas te i eirpexE
nt onempiuqt e —hiuceka T Taenc
F
S KREHTT OAHT WUD ONIF
T ISI. VWONS K HUCEKAT
OMC.SU-I E DHD TNIO F T
.UOT YSERAER NELAEE D
TAMPA8418 Palm River Road
Tampa, FL 33619813-630-0077
Fax: 813-630-2233
ORLANDO9601 Boggy Creek RoadOrlando, FL 32824-8728
407-850-9614Fax: 407-850-0823
JACKSONVILLE8750 Philips Hwy
Jacksonville, FL 32256904-737-6000
Fax: 904-737-1260
DAVIE5210 Reese RoadDavie, FL 33314954-581-4744
Fax: 954-583-0318
MIAMI(Export Parts Facility)6144 NW 74th Ave.
Miami, FL 33166-3710305-477-2442
Fax: 305-477-3383
LAKE CITY539 SW Arrowhead Terrace
Lake City, FL 32024386-758-7444
Fax: 386-758-7744
JACKSONVILLELAKE CITY
ORLANDOTAMPA
FT. MYERS
DAVIE
MIAMI
Please visit one of the following Flagler locations to find out more about Takeuchi products.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2014 • Page 7
TAMPA8418 Palm River RoadTampa, FL 33619813-630-0077Fax: 813-630-2233
ORLANDO9601 Boggy Creek RoadOrlando, FL 32824-8728407-850-9614Fax: 407-850-0823
JACKSONVILLE8750 Philips HwyJacksonville, FL 32256904-737-6000Fax: 904-737-1260
FORT MYERS5151 Dr. Martin Luther King, Jr.Blvd.Ft. Myers, FL 33905239-481-8554Fax: 239-481-3302
DAVIE5210 Reese RoadDavie, FL 33314954-581-4744Fax: 954-583-0318
MIAMI(Export Parts Facility)6144 NW 74th Ave.Miami, FL 33166-3710305-477-2442Fax: 305-477-3383
LAKE CITY539 SW Arrowhead TerraceLake City, FL 32024386-758-7444Fax: 386-758-7744
Page 8 • October 29, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Ararat Rock Products’ Love of Crushing Spans GenerationsBy Brenda Ruggiero CEG CORRESPONDENT
Ararat Rock Products Company has oper-ated a quarry in Mount Airy, N.C., for morethan 50 years. Recently, the companyacquired a new one in Eden, N.C. (formerlyVirginia Solite).James Crossingham IV, vice president of
Ararat Rock Products Company, said that hisgrandfather started the company in 1955,and is still active in it at the age of 85. “He was with the Navy Construction
Battalion during the Korean War,”Crossingham said. “They crushed rock andbuilt air fields and things like that all over theworld. He actually crushed rock atGuantanamo Bay, Cuba, and that’s where hesort of fell in love with rock crushing. Sowhen he got out of the service that was whathe wanted to do. He started in the rock crush-
ing business in 1955, and they did mostlyportable crushing for years, following theinterstate system. They followed I-77, I-81,I-85 and I-64, and did a lot of crushing forthe interstate system as it was being built.”Crossingham’s father, James III, recently
retired after working at the quarry his entirelife, and the legacy continues.“I started working in the quarry on week-
ends and summers and school breaks —either in the passenger seat of a dump truckor riding on the fuel tank of the D8 or thehood of the scraper with Dad and Grandpamy whole life,” he said. “Then when I gotout of school, I came to work and I’ve beenhere ever since. I’ve been here about 12years full time. We have operated a portablecrushing operation in Wyoming for the pastsix years, so that’s been a big part of my edu-cation — moving around the state ofWyoming and crushing different kinds of
rock”The business changed from portable
crushing exclusively with the addition of apermanent site around 1960, with the crewgoing out when there was work and return-ing when there wasn’t. At one point, theyhad three portable plants operating in NorthCarolina and Virginia. The company hasbeen located only in Mount Airy since 1980.The new quarry was purchased in
December of 2013, and Crossingham plansto bring something new to the location.“The Eden location has been operated as
a production facility for lightweight aggre-gate until only recently,” Crossingham said.“Producing lightweight aggregate requiresadditional processing that we will not beconducting. We will be producing NCDOTapproved construction aggregates for the pri-vate municipal and commercial markets.The stone here makes a high quality product,
and I think folks will be very pleased withthe performance and look of our stone. It iscalled argillite, which is very similar to slate.It is black and very durable. We hope to fullydevelop this site and a healthy market in thisregion with a quality product and superiorservice.”Crossingham said that he plans to go out
and market their product to a broader rangeof customers than the previous owners.“There is potential that has not yet been
realized for that market, and we are hopingto do that.”A few new pieces were purchased for the
operation, but Crossingham said they havebrought in some used equipment as well asfabricating some of it themselves to create aplant. New items include five new Hoover
brand conveyors, two 6 x 20 ft. (1.8 x 6.1 m)
James Crossingham IV, the fourth generation in the family business, worked manylong days with the rest of the staff getting the new quarry in Eden, N.C., up and run-ning. The operator of this Cat 988H loader digs into just shot argillite rock.
Ararat uses a Telsmith 52 x 52 in. (132.1 x 132.1 cm) horizontal impact crusher asthe secondary crusher.
The quarry uses a 30 x 42 in. (76.2 x 106.7 cm) Telsmith jaw as the primary crush-er.
see ARARAT page 82
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2014 • Page 9
Our dealers recognize a perfect pairing when they see it. They see our single-line focus and dedication to innovation and excellence. They see how well Link-Belt excavators by LBX and Kawasaki wheel loaders by KCMA pair to work a job site in no time. It’s time you took a look. Check with your local dealer today.
Main Office:1023 S. 50th Street • Tampa, FL
866-586-8956
Fort Lauderdale(Pompano Beach)
954-327-8808
Fort Myers293-334-6063
Orlando407-859-9160
Jacksonville904-268-4400
Page 10 • October 29, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
ascvolvo.com
GEORGIABuford678.318.9500Forest Park770.319.0074Savannah912.964.8079
SOUTH CAROLINACharleston843.414.1120Columbia803.791.0740Piedmont864.704.1060
NORTH CAROLINAAsheville828.687.0620Charlotte704.596.8283Greenville252.754.5280Raleigh919.661.8710
TENNESSEEChattanooga423.308.7940Knoxville865.525.1845
NORTH DAKOTABismarck701.250.4882Fargo701.271.2360Minot701.839.4020Williston701.570.5309
Volvo is with you. That means a quality product you can depend on. A dealer you can rely on. A commitment to helping you build it right. Smart Works – every day.
You’re interested in performance and productivity. So are your machines.
Smart Works.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2014 • Page 11
Page 12 • October 29, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Good Hope Contracting Paves Way Along I-22 in JasperBy Eric OlsonCEG CORRESPONDENT
Having confidence in the reliability ofyour equipment when you are running a con-struction firm may be a little more importantthan the amount of money you lay out forthat equipment.But when both of those factors come out
in favor of a contractor, the result is the costof doing business is low and the peace ofmind is high.Such is the case for Good Hope
Contracting Co. Inc. in Alabama, with loca-tions in Cullman, Birmingham and Gadsden.The paving contractor has definitely come
out ahead as a result of its recent purchasesof several Volvo machines from CowinEquipment Co., a dealership with stores inAlabama, Georgia and Florida.When Good Hope began planning last
spring to work on paving a 7.5 mi. (12 km)stretch of Interstate 22 in Jasper, about 40 mi.northwest of Birmingham, the company’smanagement realized that it needed toupgrade its stock of paving equipment.After Good Hope conferred with its long-
time business associates at CowinEquipment, the paving firm decided to pur-chase a pair of Volvo P7170 pavers, as wellas two Volvo asphalt compactors, a DD110Band a DD140B.“We went with Volvo for a couple rea-
sons,” said Craig Liggan, a senior vice pres-ident of Good Hope. “Price comparison withother machines was one factor. Another fac-tor being, since Volvo bought Blaw-Knox,there have been some positive changes andafter we demoed one of the pavers we werevery happy with the results. We just felt thatwith the features Volvo offered on this
newly-designed paver it was something wewould like to try and see how well itworked.”
Volvo Offers Several Striking Features
The Volvo pavers and compactors actual-ly have several key features that Good Hopehas found attractive.“Well, one feature that we had to have
was the MOBA grade and slope control sys-tem, something that we have on some of our
other machines that we have gotten goodresults with,” said Zac Spanick, pavingsuperintendent, Good Hope. “The frontwheel assist on the paver is something thatwe don’t have on any of our other machines,however. It is helpful when you are pavingon a crushed aggregate base surface —something with some loose material on thesurface where you need to maintain trac-tion.”He also said that the paver proved to be
easy for his operators to run because of the
way the controls are arranged and labeled.Liggan said that Good Hope is seeing bet-
ter fuel economy and less noise from thenew pavers due to their Tier IV engines, afirst for any of the company’s pavers. Inaddition, he said that there is a lot more roomaround the engine compartment for amechanic to work on them — more so thanaround the older Tier III engine-poweredmachines.
A Total PartnershipAnother factor that worked in favor of
Good Hope buying the Volvo pavers andcompactors from Cowin was that the pavingcompany had earlier purchased three Volvoexcavators for use at three of its Alabamaplants and rock quarries: an EC480 to workat Good Hope’s Blount Springs sand plantand Battleground quarry; another EC480 forthe Ashville quarry; and an EC340 for itsJasper asphalt plant. In addition, Good Hopeis renting a new EC380 excavator to operateat its Collinsville, Ala., quarry. “This whole deal was a total partnership
between Good Hope and Cowin,” said JayRousey, sales representative of Cowin,Huntsville, Ala. location. “It was a groupeffort in getting the proper set-up for the job.Craig Liggan is very savvy with regards toknowing what he needs and the equipmentrequired. Good Hope was probably one ofthe first to demo the new P7170 in the stateof Alabama and the first to actually pur-chase.”Rousey added that Cowin sent two of its
best field technicians, Darren Thomas andAlan Barnett, to the I-22 work site wheneach of the paving machines was deliveredto Good Hope.
With westbound lanes complete, the final paving of I-22 east bound in Jasper, Ala., is per-formed using a new Volvo P7170 paver.
A Volvo DD110B rolls the mat for final compaction. This is one of twoVolvo compactors purchased for this project.
The operator of a Volvo EC340 excavator feeds the Astec Mobile Screens rapscreener. see COWIN page 78
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2014 • Page 13
HOT USED / RENTAL FLEET SPECIALS2013 Laymor SM400 Sweeper, Enclosed Vista Cab with A/C, 8 Ft. Broom, 74HP Kubota ..........................................................................$46,9002007 Volvo EC210LC Excavator, 4840 Hrs, A/C, Heat, Radio, Wide Pads, 48” Bkt, Hyd Thumb unit#2155 ................................................$83,5002005 Komatsu PC300LC-7 Excavator, 5500 Hrs, A/C, Heat, Radio, Hammer Plumbing, 54” Bkt unit#2025 ................................................$84,5002006 Volvo A25D, 6600 hours, Rebuilt Transmission, AC, Heat, unit#7009 ..............................................................................................$119,0002007 Sakai SV400TF 66” Pad Foot Roller, with Shell Kit, OROPS, unit#8024 ............................................................................................$54,000
Call Will Blackerby 336-357-5005
www.mayequip.com
Lexington, NC(866) 629-3784
Columbia, SC(803) 409-0460
May Heavy EquipmentYour Authorized Distributor
Ask about 0% Financing
RENTALS • SALES • PARTS • SERVICEHYUNDAI
Reliability backedby the best industrywarranty, Hyundai,Moving You Further.Choose Hyundai for your next job.
SAKAI
www.sakaiamerica.com
TEREX
With Sakai high-frequencyrollers you can
speed compaction and be sure
you’re rolling atthe precise
impact spacingat the fastest
possible groundspeed. Put Sakaito work on your
next job.
Terex ArcticTrucks Powerful
& ProductiveTerex Gen 9trucks are built for productive
hauling, with bodycapacities that arematched to their outstanding powerand braking abili-ties. Terex Gen 9 trucks are a powerful and
productive choicefor any job site.
www.mayequip.comColumbia, SC (803) 409-0460
www.mayequip.comLexington, NC (866) 629-3784
NE W & USED SALES RENTALS PARTS SERVICE RingPowerCrane.comFLORIDASt. Augustine904.737.7730
Pompano Beach954.971.9440
Tampa/Orlando407.855.6195
Miami (Int’l Sales)
305.477.8717
GEORGIAUnion City770.774.7300
NORTH CAROLINAConcord704.795.3636
SOUTH CAROLINALadson843.818.1954
WE PERFORM ANNUAL CR ANE INSPEC TIONS!
WANTED: USED CRANES
ALL BRANDS CONSIDERED
904-494-1418 or
904-494-1415
New & Pre-Owned Cranes, Boom Trucks and More!View our used inventory at:
used.RingPower.com/Craneused.usedenview our used inV
.cRingPowererwoingPRt:y aorten
om/.c aneCranerC
954.971.9440
WE PERFORM ANNUW & USED SALES
Pompano Beach904.737.7730St. AugustineFLORIDA
NE
407.855.6195
ANE INSPECAL CRWE PERFORM ANNUALS
ampa/OrlandoTTampa/Orlando954.971.9440Pompano Beach
RENTW & USED SALES
770.774.7300
TIONS!ANE INSPECVICE
Union CityGEORGIA
305.477.8717(Int’l Sales)Miami
SERS ART P
704.795.3636
ingP
ConcordNORTH CAROLINA
770.774.7300Union CityGEORGIA
RVICE
843.818.1954
om
LadsonSOUTH CAROLINANORTH CAROLINA
.canererCwoingP
W
om
90
15
CON D
ONSID18 or
RANDS
904-
USED US
C USED RANES
AL
D CRASIDERED
94-141
04-494-1415: U
NTED:
ALL BRA
5
90
5U
C
41 5
DS C
4-494
904
ANT
O 418
5
CO
:
RAN
9
: U
WWAN
540-992-4150scott-gallaher.com
www. .com
Page 14 • October 29, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2014 • Page 15
866/342-7665
For more information call:
TopconHaul Truck HT-30
4 YEAR WARRANTYSMART DESIGNRIDICULOUSLY TOUGHLIGHT WEIGHTLOCKABLETIE DOWN SLOTRECESSED LATCHES
ask us about:
Not your ordinary cooler!
NOW AVAILABLEAT BENCHMARK
A best-selling ice chest with one-piece, roto-molded construction for extreme toughness and durability.
Constructed of food-grade, UV resistant kayak plastic and DryIce compatible.
Get Outfitted for any job!Out�tter 5054 Quart Capacity
Ideal Can Capacity: 46 cans + IceMax Can Capacity: 56 cans
Weight: 25 lbsIce Retention: 5 to 14 Days4 year No – Fuss Warranty
all purpose (hunting, �shing, tailgating, camping)
can be carried by 1 personbay boat casting platform
X-63iTopcon
T DESIGNARSMOUSLRIDICUL
AWWARREAR Y 4
T DESIGNOUGHY TUSLLY T
YANTARR
OUSLRIDICULLIGHT WEIGHT
ABLEOCKLTIE DOWN SLRECESSED LA
OUGHY TUSLLY TLIGHT WEIGHT
ABLETOTIE DOWN SLCHEST LA AT
Page 16 • October 29, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
WWW.CLEVELANDBROTHERS.COM USED EQUIPMENT - 855.545.0267 ext. 1
2004 CAT D5N LGP TRACK-TYPE TRACTOR, ID#UT14209, EROPS, A/C, PAT BLADE, UC @ 10629HRS, 30” SHOES 29-32%, BUSHINGS 32-36%NOT TURNED, LINKS 58-70%, IDLERS 24%,ROLLERS 57% AVG, CARRIERS 83/88% ..$58,000
2006 CAT 904B COMPACT WHEEL LOADER, ID# UP14158, EROPS, A/C, HYDRAULIC QUICKCOUPLER, BUCKET, TIRES @ 2186 HRS., RIGHTTIRES 57%, LEFT TIRES 71%....................$45,000
2007 CAT 325DL HYD EXCAVATOR, ID# UP13755,CAB, A/C, 1 PC. BOOM, 10’ 6” LONG STICK, HYD.QUICK COUPLER, BKT., AUX HYD, PLUMBED FORHAMMER USE, TRAVEL STRAIGHT PEDAL, COLDWEATHER START, RUBBER BUMPER, UC @ 7259HRS., 32" SHOES 63%, BUSHINGS 24-30% NOTTURNED, LINKS 55%, INTERNAL TRACKS 95%,SEGMENTS 40%, IDLERS 99% ..................$121,000
2011 CAT 304D CR MINI HYD EXCAVATOR, ID# UT14241, TIER III ENGINE, CAB, A/C, AUXHYD, HYD. THUMB, PLUMBED FOR HAMMERUSE ..............................................................$41,000
2006 CAT D7R XR W TRACK-TYPE TRACTOR,ID# UP12290, CAB, A/C, ANGLE BLADE, WINCH,SWEEPS, AIR SEAT SUSPENSION, UC @ 5,587HRS., SHOES @ 64%, BUSHINGS 84%, LINKS84%, SEGMENTS 65%, CARRIERS 82%....................................................................................$289,000
2005 CAT 928GZ WHEEL LOADER, ID# UT13585,EROPS, A/C, WHEEL STEERING, HYD. SINGLESTICK CONTROL, GP BUCKET, FOAM FILLEDTIRES ..........................................................$95,500
2011 CAT 525C WHEELED LOG SKIDDER, ID#UP14143, 2011 CAT 525C WHEELED LOG SKID-DER, SIDE AND REAR SCREENS, SWEEPS,WINCH, DUAL FUNCTION ARCH, GRAPPLE,BLADE, AUXILIARY LIGHTING, WATER TANK,FIRESTONE TIRES....................................$219,000
2011 CAT 416E BACKHOE LOADER, ID# 100486,EROPS, A/C, 4WD, RIDE CONTROL, AUX. HYD.’SGP GRONT BKT., E-STICK, REAR BUCKET, STA-BILIZER PADS, TIRES@2040 HRS., RF 50%, LF80%, RR 30%, LR 50%................................$79,000
2008 CAT 330DL HYD. EXCAVATOR, ID#UT13679, CAB, A/C, AUX. HYD, BKT, UC @ 11286HRS, 31.5” TG SHOES 84%, 79-99% NOTTURNED, LINKS 44-58%, IDLERS 82%, ROLLERS58-72% AVG, CARRIER ROLLERS 74-92% ................................................................................$136,500
2004 CAT 321C HYD EXCAVATOR, ID# UP12743,CAB, A/C, AUX HYD., 9’ 6” STICK, BKT, UC @7296 HRS, 31.5” SHOES 60%, LINKS 40%, BUSHINGS 52% NOT TURNED SEGMENTS 60%,IDLERS 52%, ROLLERS 60%, CARRIERROLLERS 12% ............................................$66,500
2008 CASE 445 SKID STEER LOADER, ID#UT13915, 2-SPEED, LOW FLOW HYDRAULICS,HYDRAULIC QUICK COUPLER, REAR COUN-TERWEIGHT, BLOCK HEATER, NO BUCKET,FOAM FILLED MITAS TIRES 78% REM. @ 1975HRS..............................................................$30,500
1997 CAT 14H MOTOR GRADER, ID# UP12196,EROPS, A/C, ENGINE HEATER, MULTI SHANKRIPPER, SNOW PROTECTION, PUSH BLOCK,20.5R25 TIRES @ 11379HRS, FRONTS 58-66%,REARS 46-58%..........................................$184,000
2004 CAT 972G WHEEL LOADER, ID# UP13990,EROPS, A/C, RIDE CONTROL, WHEEL STEER-ING, REAR VISION CAMERA, FUSION COUPLER,GP BUCKET, PAYLOAD MONITORING SYSTEM,26.5R25 TIRES @ 10,431 HRS: 81-85%......................................................................................$155,500
1993 KOMATSU PC40 MINI HYD EXCAVATOR, ID# UT14097, CAB, 1PC SWING BOOM, LONGSTICK, BKT, MECHANICAL THUMB, 15” SHOES ........................................................................$24,200
2011 CAT 299C MULTI-TERRAIN LOADER, ID# UP13534, TIER III ENGINE, EROPS, AIR CONDITIONING, HEATER, 2-SPEED TRAVEL,STANDARD FLOW, MANUAL QUICK COUPLER,BUCKET, 18IN SHOES 60% @ 950HRS ....$62,000
2005 CAT 740 ARTICULATED TRUCK, ID#UP13430, CAB, A/C, 6X6, RETARDER, TIRES @6803 HRS., RF 69%, LF 32%, RR1 17%, RR253%, LR1 67%, LR2 3% ............................$227,500
1999 CAT 773D OFF HIGHWAY TRUCK, ID#UP12192, CAB, A/C, DUAL SLOPE BODY, LINER,TRACTION CONTROL, RETARDER, TITAN24.00R35 TIRES @ 17247HRS, FRONTS 82%,REARS 75% ..............................................$299,500
2010 CAT 740 ARTIC EJECTOR TRUCK, ID#UP13553, CAB, A/C, 6X6, RETARDER, PRE-LUBESYSTEM, OVERSIZE BED WITH ROCK EJEC-TOR, 29.5R25 TIRES @ 11035HRS, RF 75%, LF65%, RR1 RECAP 50%, RR2 65%, LR1 RECAP50%, LR2 RECAP 40%..............................$236,500
2000 CAT 777D OFF-HIGHWAY TRUCK, ID#UT12614, CAB, A/C, PAYLOAD MONITORINGSYSTEM, DUAL SLOPE HEATED DUMP BODY,RETARDER, TRACTION AID, PRE LUBE, 4X6,RIGID FRAME, TIRES @ 19455HRS AVG 45-70%,RF 68%, LF 29%, RR1 58%, RR2 48%, LR1 52%,LR2 38%, WET FRONT BRAKES, CALL FORCOMP HOURS ..........................................$650,000
2011 CAT 262D SKID STEER LOADER, ID#UT14170, TIER III C3.4 ENGINE, CAB, A/C, AIRRIDE SEAT, ELEC CONTROL FOR IMPLEMENTS,1-SPEED TRAVEL, LOW FLOW HYD’S, MANUALQUICK COUPLER, S2 PERFORMANCE PACKAGE......................................................................$37,000
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2014 • Page 17
WWW.CLEVELANDBROTHERS.COMUSED PARTS - 855.545.0267 ext. 2
CATERPILLAR 120M2, Hitch, #3377511/51815CATERPILLAR 16, Final Drive, #4D7950/43906CATERPILLAR 16, Transmissions, #9M8300/42387CATERPILLAR 216, 216B, 226, 226B, 228, 232, 242, 246, 247,252, 256, 257, 262, 267, 268, 272, 277, 287, Bucket, GP,
#2856095/32284CATERPILLAR 304CR, 304.5, 305CR, Bucket, GP,
#2277268/53007CATERPILLAR 304CR, 304.5, 305CR, Bucket, GP,
#3031340/53009CATERPILLAR 311, SWIVEL, #4I7603/54757CATERPILLAR 311, 312, Booms, #5I3412/54544CATERPILLAR 313D, 318BL, 318BLN, 318CL, 318CLN, 319DL,
319DLN, 320D, 320D GC, 320DLRR, 320EL, 323DL,323DLN, 323EL, 324DL, 324DLN, 326DL, 329DL, 345DL,Track Groups
CATERPILLAR 314, Blade, #3387943/51608CATERPILLAR 315, 315B, 315C, Bucket, GP, #C315-48/53200CATERPILLAR 315D, Final Drive, #3500452/47695CATERPILLAR 320, Final Drive, #7Y1571/37840CATERPILLAR 320, 321, 322C, 325C, 330C, Bucket, GP,
#1325052/54432CATERPILLAR 322C, 325C, 330C, Bkt, GP, #1282935/54431CATERPILLAR 322CL, 322CLN, 322L, 325, 325C, 325CL,
325D, 325DL, 329D, 329DL, 329DLN, 329E, 329EL,329ELN, 336DL, 345C LC, Track Groups
CATERPILLAR 325C CR, 325C LCR, 328D LCR, 330B, 330BL,330BLN, 330C, 330CL, 330CLN, 330D, 330DL, 330L,330LN, 336D, 336DL, 336EL, 336ELN, Track Groups
CATERPILLAR 330C, Bucket, GP, #3029013/32549CATERPILLAR 345, 345A, 345B, 345B II, 345BL II, 345BL IIVG,
345BL II LR, 345BL LC II, 345BL LR, 345BL ME, 345BL ME II, 345BL UHD, 345CL, 345CL ME, 345CL UHD, 345CL VG, 345CL WVG, 345DL, 345DL ME, 345DL VG,345L, 349DL, 349EL, Track, Steel, #3012287/52976
CATERPILLAR 345B, Engine, #1382001/37356CATERPILLAR 345B, Final Drive, #1362847CATERPILLAR 345C, Bucket, GP, #2516921/51580CATERPILLAR 365B, Bucket, GP, #1754487/49221CATERPILLAR 365BL, Final Drive,#1362956/39647CATERPILLAR 375, 375L, Cab, Other, #1082517/33834CATERPILLAR 375, 375L, 5080, Final Drive, #7Y0884/38294PETERBILT 379, 379EXHD, Truck Components - Engine,
#1802283CATERPILLAR 416C, 416D, 416E, 420C, 420D, 420E, 426C,
Bucket, GP, #1345869/30959CATERPILLAR 416C, 426C, Bucket, GP, #1345865/51492CATERPILLAR 416C, 426C, Bucket, GP, #1366912/51493CATERPILLAR 416E, Bucket, GP, #2511786/51592CATERPILLAR 420D, Bucket, GP, #1181984/52140CATERPILLAR 420F, Bucket, GP, #3377388/51594CATERPILLAR 430E, Booms, #3172486/2935CATERPILLAR 769D, Engine, #1230206/32272CATERPILLAR 773B, Torque Converters, #6T4674/42945CATERPILLAR 773D, Engine, #1314877/40903CATERPILLAR 824C, Differential, #4V1073/31078CATERPILLAR 824C, Differential, #3V4030/31079CATERPILLAR 824C, Transmissions, #3P6809/33473
CATERPILLAR 836, Cab, EROPS, #1293276/2846CATERPILLAR 836G, Engine, #1411778/44901CATERPILLAR 836G, Blade, #1474413/45507CATERPILLAR 836G, Cab, EROPS, #1793710/45412CATERPILLAR 836G, Torque Converters, #1457109/52159CATERPILLAR 928HZ, 930H, Axle, #2571712/49702CATERPILLAR 930G, 938G, Transmissions, #2348866/32134CATERPILLAR 930H, Arm, #2357301/49703CATERPILLAR 950G, 950H, 962G, 962H, 962K, Axle,
#3589581/52959CATERPILLAR 950G, 962G, IT62G, Axle, #1383122/35701CATERPILLAR 950G, 962G, IT62G, Axle, #1383121/35700CATERPILLAR 951C, Transmissions, #2P2040/2963CATERPILLAR 953C, Arm, #8G4021/31702CATERPILLAR 962G, Engine, #1168671/34551CATERPILLAR 962G, Counterweight, #2318853/36042CATERPILLAR 970F, Torque Converters, #1463329/43970CATERPILLAR 973, Equalizer Bars, #3W2208/572CATERPILLAR 973C, Equalizer Bars, #3W8424/31118CATERPILLAR 980C, Arm, #9V6026/3062CATERPILLAR 980C, Cab, EROPS, #8V8914/28500CATERPILLAR 980G, Cab, EROPS, #1097922/47687CATERPILLAR 980G Final Drive, #1605585/8037CATERPILLAR 980G, 980G II, Axle, #1725385/34669CATERPILLAR 980G, 980G II, Counterweight, #1146030/28593CATERPILLAR 980G, 980H, Bkt, Light Material, #1952647/46925CATERPILLAR 980H, Axle, #2327558/34667CATERPILLAR 988B, Torque Converters, #3P8074/51651CATERPILLAR 988B, Transmissions, #9W0782/32318CATERPILLAR 988F, 988F I, Final Drive, #4E2664/43974CATERPILLAR 988G, Cab, EROPS, #1289664/29291CATERPILLAR 988G, 988H, Booms, #2550042/51861CATERPILLAR 988G, 988H, Booms, #2486341/48691CATERPILLAR 988H, Engine, #2256065/52485CATERPILLAR 988H, Cab, EROPS, #2289530/54101CATERPILLAR 988H, Final Drive, #1920822CATERPILLAR 988H, Final Drive, #1920822CATERPILLAR 988H, Torque Converters, #1285303/52676CATERPILLAR 988H, Torque Converters, #1285303/52676CATERPILLAR 992C, 992D, Cab, EROPS, #2V5075/46948CATERPILLAR 992C, 992D, Differential, #1V5944/56923CATERPILLAR 992C, 992D, 690B, Cab, EROPS,
#9V5306/30599CATERPILLAR AP-1000E, AP-1055E, SCREED,
#2518303/53371CATERPILLAR D10, Cab, EROPS, #3T8106/36149CATERPILLAR D10, D10L, Transmissions, #3P7556/31378CATERPILLAR D10L, D10, Torque Converters, #6P6412/31183CATERPILLAR D10R, Equalizer Bars, #2223676CATERPILLAR D10R, MAIN FRAME, #1157395/44976CATERPILLAR D10R, Torque Converters, #1102769/35220CATERPILLAR D10T, Counterweight, #2235568/39840CATERPILLAR D10T, Equalizer Bars, #2223682/54606CATERPILLAR D11, D11N, Torque Converters, #3T9677CATERPILLAR D11, D11N, Track Frame, #6Y2686/54865CATERPILLAR D11, D11N, Track Frame, #6Y2687/54866CATERPILLAR D11N, Engine, #8N9602/49456CATERPILLAR D11N, Equalizer Bars, #2072683
CATERPILLAR D11N, Final Drive, #9W3649CATERPILLAR D11N, Track Frame, #6Y2686 & 6Y2687CATERPILLAR D11R, Equalizer Bars, #2072684CATERPILLAR D11R, Torque Converters, #1210030/47691CATERPILLAR D11R, D11T, Final Drive, #3242343/46124CATERPILLAR D350E, Engine, #1274527/39865CATERPILLAR D350E, Axle, #1290384/40556CATERPILLAR D350E, Axle, #1290385/40557CATERPILLAR D350E, Cab, EROPS, #7U4400/40232CATERPILLAR D350E, Final Drive, #1281048/40688CATERPILLAR D5B, D5B LGP, D5S, D6D, Cylinder, Boom/Lift,
#7J8302/3097CATERPILLAR D5H, Winch, #08929/51595CATERPILLAR D5M, D5M LGP, D5N, Blade, Angle,
#2096089/32261CATERPILLAR D6, D6T, D7, Winch, #2796427/48648CATERPILLAR D6, D6T, D7, Winch, #3710956/51602CATERPILLAR D6,D6T, D7, Winch, #2796427/50943CATERPILLAR D6,D6T, D7, Winch, #3710956/51604CATERPILLAR D6N LGP, Blade, Angle, #2236304/38985CATERPILLAR D6N LGP, Equalizer Bars, #8E0743/40210CATERPILLAR D6N LGP, Torque Converters, #1880502/44386CATERPILLAR D6R, Equalizer Bars, #2012078/31951CATERPILLAR D6R, Equalizer Bars, #2012078/31951CATERPILLAR D6R, Equalizer Bars, #2012078/38992CATERPILLAR D6R, Transmissions, #2192622/52974CATERPILLAR D6R LGP, BRAKE & PLANETARY GRP,
#8E5273/38926CATERPILLAR D6T, Blade, Angle, #3787908/50335CATERPILLAR D6T, Counterweight, #1175695/54092CATERPILLAR D6T, Counterweight, #1Q4324CATERPILLAR D6T XL, Blade, Angle, #3787908/48647CATERPILLAR D7H, Equalizer Bars, #1414690/28344CATERPILLAR D8, D8L, D9N, Torque Converters, #9P4890CATERPILLAR D8H, Torque Converters, #1M3808/36611CATERPILLAR D8H, Transmissions, #5M7987/36604CATERPILLAR D8H, Winch, #31E3778/37027CATERPILLAR D8H, Winch, #31E1067/36601CATERPILLAR D8N, D8R, D8T, Blade, SU, #7T5312/53124CATERPILLAR D8N, D8R, D8T, Blade, SU, #7T5925/48189CATERPILLAR D8R, Torque Converters, #1613304/47690CATERPILLAR D8R, Transmissions, #2192624/47692CATERPILLAR D8R, D8T, Blade, #D8TCB/54790CATERPILLAR D9L, Blade, U, #9J7420/42578CATERPILLAR D9N, Blade, SU, #7T5384/47147CATERPILLAR D9N, D10N, D11N, Cab, EROPS,
#8E1085/48556CATERPILLAR D9R, D10R, D11R, Cab, EROPS,
#1118549/50331CATERPILLAR TH83, Engine, #1182942/49559VOLVO WG42T, Truck Components - Engine, #6I2642/59558GRADALL XL3300, MAIN HYD PUMP, #80333097/52673
836G Cab1793710, Stk# 45412
D6T Track Show Sys 12349705, Stk# 50328
988H Engine GRTO2256065, Stk# 52485
D10R Rebuilt Torque Convertor1102769, Stk# 35220
Page 18 • October 29, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Flint Equipment Companywith 17 full-service branch locations in Alabama, Georgia and South Carolina
Office: 404-691-9445Contact: Darrin Hogeboom
[email protected]: Justin Murray
Your John Deere Dealer Serving Our Customers for 45 Yearswww.flintequipco.com
2007 Hitachi ZX240LC3, Stk F563335, S/N FF01V1Q021296, 4920 Hrs, Cab w/AC,Med. Arm, Standard Boom..........$109,000
2012 John Deere 624K, Stk F567445, S/N1DW624KPTBD640585, 1649 Hrs, Cabw/AC, Quick Coupler ..................$145,000
2006 John Deere 700J LT, Stk F567320,S/N T0700JX127395, 3626 Hrs, Cab w/AC,Lever Steer, Long Track ................$77,000
2006 Hitachi ZX650LC3, Stk F567597, S/NFF01J9Q020076, 6552 Hrs, Cab w/AC,Long Track, Counter Wt Removal$242,000
2013 John Deere 544K, Stk F569882, S/N1DW544KZPCE649811, 375 Hrs, Cabw/AC, 3 Spool, Aux Hydraulics ..$175,000
2010 John Deere 450DLC, Stk F556899,S/N FF450DX913885, 3466 Hrs, Cabw/AC, Med. Arm, Long Track ......$224,500
2007 John Deere 850J LT, Stk F567323,4254 Hrs, Cab w/AC, Lever Steer, LongTrack, Hydrostatic Trans ............$140,000
2009 Hitachi ZX210F-3, Stk F567855, S/NFF00BHF210003, 6889 Hrs, Cab w/AC,Cab Riser, Wide Track ................$165,000
J.H. Williams Oil Co., Inc. has been in the fuel business for over 70years. With bulk facilities and truck fleets headquartered in both Tampaand Bradenton, Fl. We offer a competitive advantage when it comes toprice and location. Also, because we are a family owned company (inits 4th generation) we offer exceptional customer service. You willalways speak to a live person when you call to place an order, and youwill have a sales person who personally takes care of your account. Yourneeds are our needs!
Whether you are committed to a short term construction project in ourarea, or you are in need of an ongoing supply of commercial fuel, yoursatisfaction is our number one goal.With six quality brands: Shell,Chevron, Texaco, Citgo, Marathon,and Sunoco, as well as a variety ofunbranded supply options, we havesomething for everyone.
Please visit our website atwww.jhwoil.com to learn more.
Are You in Need of a Fuel Supplier?
Serving Central FloridaGive us a call so we can start building a relationship today!
J.H. Williams I.V.(813) 601-6388
Larry McGary(941) 720-3843
We have the ability to monitor your fuel using Automatic Tank Gauges. This technology ensures accurate and timely deliveries.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2014 • Page 19
606 S. R. 16 East, Green Cove Springs, FL 32043
904-284-9670 Fax: 904-358-8706Call Neil Corrado: 888-370-9336 or 904-284-9670 • Cell: 904-571-9270 • Email: [email protected]
www.mobromarine.com
MOBRO MARINE, INC.
Mobro MarineMeeting your Marine Needs Since 1962
SPECIAL SALE: Kobelco CK850G
150 ft boom, 2 drums, free fall both drums, block and ball
Call Neil Corrado 904.571.9270
Page 20 • October 29, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Customers, local leaders and the community wereinvited to an open house at MacKinnon JCB inTampa, Fla., as part of the road show with JCB’s
highly specialized military backhoe loader, the HMEE (HighMobility Engineer Excavator) and its all-new commercial-purposed 3CX backhoe loader. MacKinnon JCB personnelwere pleased to host the open house, which also supportedthe Lone Survivor Foundation, an organization dedicated tothe recovery and healing of wounded American servicemembers and their families, struggling with invisible injuriessuch as combat trauma stress, mild traumatic brain injuryand chronic pain management. MacKinnon JCB has made customers a priority since its
start in 1982.A.D. “Sandy” MacKinnon founded MacKinnon
Equipment & Services in 1982 and pledged to “earn the rightto do business with customers each and every day.”The company’s commitment to providing an outstanding
customer experience and its diverse product and serviceofferings have netted the dealerships a solid reputation forconducting business with integrity, respect and the highestdegree of professionalism.The company’s team members recognize that their pur-
pose is to serve customers completely, with a sense ofurgency. MacKinnon JCB offers sales, rentals and servicesnew and used material handling equipment, constructionequipment, warehouse products and installation in southGeorgia and Florida. The company specializes in JCB equip-ment and carries their line of backhoe loaders, compactorsand rollers, excavators, rough-terrain forklifts, wheel andtrack loaders, off highway trucks, skid steers, telehandlers,tractors and attachments.MacKinnon JCB not only wanted to open its doors, but
also bring awareness to the Lone Survivor Foundation.Signatures on the “Show Your Support” banner raisedmoney at this event and others on JCB road tour for the LoneSurvivor Foundation.Guests of the open house were treated to lunch, a ride in
the HMEE, the Dancing Digger’s show, a backhoe competi-
tion and door prizes.In addition, Ben Coleman, general manager of backhoe
loader sales of JCB, took time out from the open house atMacKinnon JCB to discuss the 3CX backhoe loader.“This summer we launched a brand new 3CX backhoe
loader and we are doing the open house, we are actually tour-ing across the country with different JCB dealers to launchthat new backhoe loader. We are using the HMEE to helppromote and we are raising money for Lone SurvivorFoundation.”According to Coleman, the new CX boasts a number of
new features. “This year we added auto idle, auto throttle, various new
technologies to our range of super backhoes, which makesthem much easier for an operator to use and much more fueleconomical.”The 3CX comes with a Tier IV final engine standard. “That’s a fact we are really proud of — it’s a Tier IV final
engine already. It’s 74 horsepower, but it has no DPF and no
DEF fluid and it’s Tier IV final ready, so it will continuethrough next year and the next EPA regulations when theykick in March. It comes standard not only with the Tier IVfinal engine, it has something that is unique in the backhoeloader world that we call auto daily checks, so you don’tneed to lift the hood to check any of the fluids at all. You sim-ply put the key in the ignition, turn it on and it runs a fulldiagnostic check for you. If it finds any issues, it will reportit to you on the onboard LCD display, but it will also send itvia the JCB live telematics package. A simple and function-al backhoe, the key part, the engine is really very special.”MacKinnon JCB is the JCB dealer of the west coast, cen-
tral and north Florida as well as southeast Georgia. Its homeoffice is in Tampa and the company has branches in FortMyers, Orlando and Jacksonville, Fla., and Tifton, Ga.
(This story also can be found on ConstructionEquipment Guide’s Web site at www.constructionequip-mentguide.com.) CEG
see MACKINNON page 70
JCB’s Road Show Makes Stop at MacKinnon JCB in Tampa
The JCB Dancing Diggers put on a show for attendees.
(L-R): Rafael Nunez, backhoe loader product manager of JCB, points out the fea-tures of the HMEE to Fyeez Kamal, Tom Sutherland and Lisa Chancey, all of NeffRental.
Alex MacKinnon (L), vice president, and SandyMacKinnon, president, MacKinnon JCB, talk at theevent.
Ben Coleman, JCB’s general manager of backhoeloader sales, presents a brief speech on the new JCB3CX.
• Over 40 Hyundai models to choose from • Industry-best warranty • Complete product support and service
Over 57 Years of ExperienceSales n Rentals n Parts n Service
Servicing and Selling Equipment since 1955
With Multiple Locations in Florida
786-507-4543
RECEIVE 10% OFFyour next purchase of parts*Promotion code: Parts 4-13
NEWLOCATION IN
JACKSONVILLE,FLORIDAWe Export Worldwide • Exportamos a todo el mundo
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2014 • Page 21
Page 22 • October 29, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Factory Trained Mechanics
JACKSONVILLE CRANE & MACHINERY, LTD.6740 Highway Avenue Jacksonville, FL. 32254
OFFICE: 904-786-3181E-MAIL: [email protected]: www.jaxcrane.com
All machines are owned by Jacksonville Crane & MachineryALL MACHINES ARE SUBJECT TO PRIOR SALE
AND PRIOR RENTAL COMMITMENT
2002 LIEBHERR LMT 1100-2 S/N 65192, 120 ton Allterrain hydraulic truck crane JCM-180, Main boom length171', jib 35'-62', 2 winches, boom dolly, Block & Ball, Tires;29.5x25, Cummins engine Condition: Excellent ....$550,000
1994 LINKBELT HSP-8060 S/N 53i4-1729, 60 ton roughterrain crane JCM-146, 110' Main boom, 33' jib, 2 winches,Cummins engine Condition: good............................$135,000
JACKSONVILLE LOCATION103 BRYAN STREET
JACKSONVILLE, FL 32202
904-354-5746
FAX: 904-355-1891
POLK CITY LOCATION600 N. COMMONWEALTH AVE.
POLK CITY, FL 33868
863-984-6262
FAX: 863-984-6363
RENTALS, SALES, SERVICE, PARTS, COMPRESSORS, GENERATORS, LIGHT TOWERS, ABRASIVE BLASTING EQUIPMENT, DUST COLLECTORS, AIR DRYERS, DEHUMIDIFIERS, MANLIFTS
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2014 • Page 23
Page 24 • October 29, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Several Ferguson 46A and 46B Rollers toChoose From ......................Starting at $5,900
2002 International 4700 Pothole Patcher Truck,DT 466 Engine, A/B, 123k Miles, Arrow BoardRaises and Lowers..............................$18,900
Dresser Motorgrader, Articulates, Heat,Komatsu Diesel Engine, 14’ Blade, Scarifier,Tip Controls ........................................$28,700
$129,500
SPECIALTRUCK SALE
Nextran Truck CenterCall Mike Graber
800-347-6225 • Cell: 904-813-4512 • Fax: 904-354-3807
Isuzu 2005 Used Gas NPR, 8900 Miles!!! 12’ Flatbed with Hoist,Reese Hitch and Fifth Wheel Hitch! Like New!
Isuzu NPR-HD with Aluminum Dump Body, Over 6000 lbs ofPayload!
2015 Mack Dumps In Stock! Tandems and Tri-Axles Isuzu NPR-HD with Tool Body, 2 in Stock, Gas and Diesel
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2014 • Page 25
© 2014 Caterpillar. All Rights Reserved. CAT, CATERPILLAR, BUILT FOR IT, their respective logos, “Caterpillar Yellow,” the “Power Edge” trade dress as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission. www.cat.com www.caterpillar.com
BUY NOW, PAY LATER.
SKIP 3 PAYMENTS
GET UP TO A $1,000 CAT WORK
TOOL CREDIT!*
AND
*Offer valid from October 1, 2014 to January 31, 2015 on select new models of machines manufactured by Caterpillar Inc. Building Construction Products Division. Offer based on the purchase and finance of new qualifying models. Financing terms and conditions are subject to credit approval through Cat Financial. Customers can elect to skip three months of payments at front end of loan period. A credit of $250 will be given for the purchase of a fabricated work tool(s) [buckets, forks, work tools without nomenclature] and a credit of $1,000 will be given for the purchase of a hydro-mechanical work tool(s) for a Cat Skid Steer Loader, Multi Terrain Loader, Compact Track Loader, Compact Wheel Loader, Mini Excavator, Backhoe Loader and Small Wheel Loader. This offer is available only at participating Cat dealers. Offer is available to customers in the USA and Canada only and cannot be combined with any other offers. Offer subject to machine availability and may change without prior notice. Additional terms and conditions may apply.
YOU’RE MAKING A LIVING. WE’RE MAKING IT EASIER.
Learn more by visiting
.com .caterpillar.cat.com wwwwww. All Rights Reserved. CA© 2014 Caterpillar
Clewiston • Fort Myersest Palm BeachMiami • Davie • W
305-592-7184.kellytractorwwwY TRACTOR KELLLY TRACTOR CO.
, their respective logos, “Caterpillar YT FOR ITTERPILLAR, BUIL LT FOR IT, CA ATERPILLAR, BUILT . CA AT
Clewiston • Fort Myersest Palm Beach
305-592-7184.comrr.com
Y TRACTOR CO.
Daytona Beach Jacksonville
,” the “Power Edge” trade dress as well as corporate and product identity used herein, are trademarks of Caterpillar and may noellow, their respective logos, “Caterpillar Y
Brooksville • Sarasota • Palm Bay • Lakeland• Daytona Beach St. Augustine • Lake City • Jacksonville
888-748-7464catrental.ringpower
RING POWER CORPORA
,” the “Power Edge” trade dress as well as corporate and product identity used herein, are trademarks of Caterpillar and may no
• OrlandoBrooksville • Sarasota • Palm BayampaOcala • T • allahasseeT• St. Augustine • Lake City
888-748-7464.comcatrental.ringpower
®TION ORPORA ATION
t be used without permission. ,” the “Power Edge” trade dress as well as corporate and product identity used herein, are trademarks of Caterpillar and may no
• OrlandoCrestview • Panama City • Pensacola
850-785-4007.thompsontractorwww
THOMPSON TRACTOR CO.
t be used without permission.
Crestview • Panama City • Pensacola850-785-4007
.commpsontractor.THOMPSON TRACTOR CO.
Page 26 • October 29, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Visit www.sealsaver.comfor more information or contact us at
1-800-683-5189
Exclusively manufactured by:
Fluid ControlServices, Inc.1155 Allgood Road • Suite 15
Marietta, GA 30062
1-800-683-5189Fax: 770-509-5832
SEAL SAVER has proven effective inConstruction, Mining, Waste Management,Quarries, Refineries, Marinas, Recycling,Wood Products Processing, Steel Mills
and Hot Slag Industries.
SatisfactionGuaranteed!
SEAL SAVER PROTECTIVECYLINDER COVER
KOMATSUD65EX-15
STOP the never ending cycle of cylinder repairs.
Made inthe USA
The SEAL SAVER WILL:Protect cylinders from the elements • Eliminate dings and dents from fallingdebris • Reduce particle contamination of hydraulic systems • Prevent pitting due to chemical washes • Extend the lifeof cylinder seals • Eliminate rod scoring
Rugged Off-highwayCabin Temperature Control Systems
• Add-on & Replacement Climate Control Systems
• Custom Cooling/Heating Systems
• Self-contained & Split Systems• Cabin Top & Wall Mounted Systems
• Engine, AC Electric & Hydraulic Driven Compressors
• Cabin Filters & Pressurizers
Email: [email protected] Us For Assistance (972) 647-1056
www.visionaire-inc.com
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2014 • Page 27
Demolition & Recycling
2006 Volvo EC460BLC and GenesisGXP660R 2006 Volvo EC460BLC with 9,500 hours,equipped with a Genesis GXP660R Mobile Shear w/360 rotation. Only 800 hours on a NEW ENGINE, only500 hours use on shear since a complete Genesisfactory rebuild, 2500 hours on NEW hydraulic pump..........................................................Call for Price.
2009 Cat M318D MH with Grapple 6735 Hrs,Hydraulic Elevating Cab, FOPS Cab Guarding, Heat& A/C, 36’ MH Front w/Drop Nose Stick, AutomaticGreasing System, Cat GSH15B 5 Tine (3/4 yd3)Grapple w/360 degree rotation, Outriggers x4, andDual Solid Tires, Checked through Cat Dealer Shop,1000 Hour Cat Service Completed and Work Ready.Fob Summerville, SC ......................Call for Price.
2002 Komatsu PC450LC-6 UHD 5,650 original hours,25 meter/82 ft 3 Piece Ultra High Reach DemolitionArrangement + Standard Digging front w/ HD Bucket, Bothfronts fully plumbed for Rotating Shear or ConcreteProcessor, FOPS Cab Guarding, Heat & A/C, Video CameraSystem, Variable Gauge U/C @ 75%+ remaining. Very goodall-around condition and appearance. Can go straight towork!!! ..........................................................Call for Price.
2006 Cat 330DL with Labounty MSD2500R5450 Hrs, Auxiliary Hydraulics, Cab Guard, Heat& A/C, Good U/C, Equipped w/a Factory RebuiltLabounty MSD2500R Mobile Shear w/360 Rotation & Factory Warranty, Checked throughthe Shop, Serviced and 100% Work Ready. Fobour Yard in Summerville, SC ..........................................................................Call for Price.
2008 Deere 240DLC and GenesisGMS400R 2008 Deere 240DLC with 6,100hrs, equipped w/ Genesis GMS400R MobileShear w/ 360 rotation & XP upper jaw, CabGuard, Heat & A/C, and excellent U/C.Approximately 2000 hours total use on shearsince complete Genesis factory rebuild..........................................................Call for Price.
QUALITY USED DEMOLITION & RECYCLING EQUIPMENT
WE HAVE ATTACHMENTS FOR YOUR EVERY NEED
1050 Drop Off Drive • Summerville, SC 29483 (843) 873-8333 after hours: (843) [email protected]
KUHNEQUIPMENT.COM
2006 Cat M322C MH with Grapple11,201 Hrs, Hydraulic Elevating Cab, Heat &A/C, MH Front w/20’ Long Stick, 12.5 kw Generator System, Outriggers x4, and DualSolid Tires, Equipped w/HGT (1 yd3) 5 Tine Orange Peel Grapple w/360 rotation, VeryClean Machine that was Cat Dealer MaintainedSince New, Checked through Shop, Cat 1000Hour Service Completed, and 100% WorkReady. Fob Summerville, SC Call for Price.
2006 Hitachi ZX270LC-3 with 6600 Hrs,Cab w/Heat & A/C, Cab Guarding, Very GoodU/C and Equipped w/ LaBounty MSD2000RSaber Series Mobile Shear w/360 Rotation.Less than 250 Hour Use Since Complete Rebuild of Shear and All Components. ThroughShop and Work Ready. ........................................................Available for Sale or Rent.
Shears Pulverizers Processors Grapples Generator Sets
SOLDSOLD
Page 28 • October 29, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Moving History in Oak Ridge, Tenn.Caterpillar Machines Integral in Unique Community Project
Eighteen years ago, when the city of OakRidge, Tenn., and its Japan sister city, Naka-Machi, hung an 8,250-pound symbolic bellin the American town’s center, it wasn’t like-ly that organizers were thinking about howto take it down.The sometimes controversial
International Friendship Bell was firstinstalled in 1996 as a commemoration of the50 years of growing peace and friendshipbetween the United States and Japan. OakRidge has a unique tie to Japan because itdeveloped materials for the ManhattanProject, which ultimately resulted in theatomic bombs that were dropped on Japan.Today, Oak Ridge continues to be on theforefront of nuclear and scientific technolo-gy.With its location in a park near the city’s
Civic Center, this 6-ft.-7-in. tall peace bell isoften included on tours of what some call the“Atomic City” or “Secret City.”After being on public display for these
many years, the specially designed woodstructure housing the InternationalFriendship Bell began to rot. A structuralstudy in early 2014 revealed the extent ofdamage posed a threat to visitors should thepost-and-beam building falter and the heavybell fall.It didn’t take long after the study results
came out that the city manager decided itwas time to take action. Though the bell’sstructure had been chained off for some timeto prevent the public from approaching it, amore permanent solution was needed. City of Oak Ridge General Maintenance
Crew Chief Mike Miller and his PublicWorks team were asked to remove the bell
and demolish the structure in-house — aunique project that drew a lot of attentionfrom the residents of Oak Ridge. Miller thenturned to Stowers Rents to figure out whatwas needed to get the bell down withoutdamaging it. While a crane might seem likethe typical choice for lifting up a four-ton
object, this project posed special challenges.“Because of the way the bell was hanging
from the structure, it had to be lifted from thebottom,” Miller said. “It was hanging free soit could ring and there was no way to getabove it and lift it with a crane.”Miller’s contacts at Stowers, Andrew
Sturgill and Tony Parkerson, set the PublicWorks department up with a Cat TL1255Ctelehandler that could handle lifting thebronze bell from the bottom. Once the bellwas free of the structure, lifting cables wereplaced through its eye and attached to a Cat320C excavator that removed it from thesite. Once the wood structure was demol-ished — with the help of the 320C — andthe site cleaned up, the excavator returnedthe bell to sit on the cement slab where thestructure stood. It will stay there, viewableagain to the public but not able to ring, untilanother bell house is built for it.“When we were first approached with
doing this project in-house, I consulted withStowers and told them about what we hadand they matched the machines to what wewere doing,” Miller said. “We have a reallygood relationship with Stowers and we usethem for just about all our rental needs whenwe need them, from skid steers to 20-tonexcavators and everything in-between.”While the removal of the Friendship Bell
was a one-time project that isn’t likely to berepeated any time soon — especially withplans for the next structure to be constructedof steel with a wood façade — Miller saidthat he can depend on Stowers for any proj-ect he does.“Andrew and Tony get us what we need
when we need it and we are able to get thejob done,” he said.
This story was reprinted with permissionfrom Governmental Solutions Magazine,Fall 2014 Issue.
(This story also can be found onConstruction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)
Once the bell was free of the structure, lifting cables were placed through its eyeand attached to a Cat 320C excavator that removed it from the site.
Mike Miller, general maintenance crew chief, city of Oak Ridge. Stowers set the public works department up with a Cat TL1255C telehandler thatcould handle lifting the bronze bell from the bottom.
Hydrema 912HM. Off Road superior.
Talk to Your local dealer or visit hydrema.us
ARTICULATED. HIGHLY MOBILE.
LOAD CAPACITY 22.000 LB.
LOW GROUND PRESSURE.
180º LOAD DUMPING.
HIGH QUALITY.
P
ydrema 912HM. OHydrema 912HM. O oad sff Rydrema 912HM. O uperioroad s .uperior
al deour loco Y Your localk tTTalk t
ema.dryaler or visit hal de
usema.
www.ringpower.comLocations - FL
www.thompsonmachinery.comLocations - AL FL panhandle
www.gregorypoole.comLocations - Eastern NC
www.puckett-cat.comLocations - MS
www.carolinacat.comLocations - Western NC
www.yanceybros.comLocation - CA
www.louisianacat.comLocation - LA
www.powerequipco.comLocation - TN, East AR
www.link-beltmidatlantic.comLocation - VA
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2014 • Page 29
Page 30 • October 29, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Hills Machinery Creates Strong Presence With Charlotte FacilityCase Construction Equipment dealer Hills
Machinery announced the opening of a newfacility in Charlotte, N.C.
Located at 11717 Reames Rd., the new 22,000 sq.ft. (2,043.9 sq m) facility features eight service bayswith the latest equipment diagnostic and service tech-nologies.“We have a 10-ton overhead crane, full service
parts department, stocked and ready with parts andpersonnel. We have been here about 60 days. Weexpect to have between 15 and 20 people over thenext year and we have just completed a total up-fit ofthe facility,” said Jim Hills, dealer principal, HillsMachinery.The new operation will serve customers in the
Charlotte metro area and surrounding communities.The Charlotte operation will feature new, used andrental equipment, as well as heavy equipment servic-es.“We will have an intense rental presence giving the
contractors the option to try the equipment, get expo-sure to our service and our parts availability, qualityof our personnel and if they decide that they wouldlike to convert from a rental into a purchase that willbe an option that we will make sure is available tothem.“The Charlotte market is dynamic, and our cus-
tomers work extensively throughout North and SouthCarolina,” said Hills. “Our customers are best servedwith a strong presence in the area — and accessibili-ty to equipment and service is critical. We’re com-mitted to providing the most comprehensive servicein the Carolinas, and this new location helps usachieve that.” Hills added that the company’s values will enable
further growth. “I think that the philosophies that have led us to
grow so far won’t be any different than what we dotoday here in Charlotte. We will lead with productsupport first, service and parts into a market whereCase has been out for several years. We will proveourselves to the customer base that we are a depend-able, reliable partner and one that is here to stay andif we are consistent and do that on an ongoing basis,we expect that we will earn their business.”In addition to its headquarters in Columbia, S.C.,
and its new Charlotte facility, Hills Machinery oper-ates three additional locations in Greenville andRaleigh, N.C., as well as Charleston, S.C. The com-pany employs a total of 70 people at all five locations. “We realize that there is always a need for an
equipment supplier that is very conscious of what thecontractor needs and having a willingness to have avery close and personal focus and quick responsive-ness to what they want. What we have found is thatfocus on service, ahead of anything else, and thatcommitment to it day in and day out has allowed usto both come in these markets, get established andgrow,” said Hills. For more information on Hills Machinery, call
866/840-0440 or visit www.hillsmachinery.com. Formore information on Case Construction Equipment,visit http://www.CaseCE.com.(This story also can be found on ConstructionEquipment Guide’s Web site at www.construc-tionequipmentguide.com.) CEG
Bob Blevins (L), corporate parts manager, and Troy Reithen,Charlotte parts manager, are ready to help contractors in theCharlotte region with their Case parts needs.
Service technicians Kip Butterfield (L) and DonnieCreech each have many years of experience workingon different types of construction equipment.
Debbie Hutto, office administrator,keeps the branch running smoothly.
Keith Kafka, service manager, talkswith a customer about a Casemachine.
The facility, located at 11717 Reames Rd. in Charlotte, has been updated andrenovated and boasts ample service capabilities.
Andy Jones, Charlotte areasalesman.
Doug Spitzer (L), branch manager, and JimHills, dealer principal, stand in front of oneof the company’s service trucks.
ACT Construction Equipment5425 Equipment DriveCharlotte, NC 28262
Charlotte5425 Equipment Dr.Charlotte, NC 28262(910) 254-3525
Winston-Salem355 Business Park Dr.
Winston-Salem, NC 27107(336) 397-5000
Wilmington3001 Boundary St.
Wilmington, NC 28405(910) 254-3525
Used Machine Deals:Excavators
2013 SV100-1693 Hours - $78,200
Tracked Loaders2013 T210
482 Hours - $37,900
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2014 • Page 31
Page 32 • October 29, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2014 • Page 33
SUPER 2-BOLT - ON WHEEL KIT
HYDRAULIC TRACK INSTALLATION KIT
TOLL FREE 855-575-LUGS(5847)or 913-947-3934
www.bairproducts.comEmail: [email protected]
Got Lugs?
ALLOY CENTER BOGIE WHEELS
AVAILABLE SEPTEMBER 2014
REPLACEMENT DRIVE CARRIER PARTS
AVAILABLE SEPTEMBER 2014
V / TST / AAAT / AC
STRAX P PAEREV / T
TOLL FREE
N WT - OLL OB-R 2PEUS
Factor
855-575-LUGS(5847)or 913-947-3934
oducts.com.bairprwwwoducts.comEmail: info@bairpr
855-575-LUGS(5847)
TIL KEEHN W
Bai ’ Axlery
913-947-3934oducts.com
oducts.com
• 25% Thicker Steel Backing Plates
AVAILABLE SEPTEMBER 2014
TNEMECALPRERA PREIRRA CVEIRD
G G
25% Thicker Steel Backing Plates
AVAILABLE SEPTEMBER 2014STR
Bolt-On ReplacementTrack Drive Lugs
Go ot ot Go Luo ug gs L s? Lug ? gsGot Lug ? s?
• Bolt-On Wheel Replaces Older Hub Style Wheels
• 100% Larger Axle Shaft• Greaseable/
Preload Adjustable•
30/50/60 ModelsCAT 247/257, ASV/TEREX
•& Sprocket Base
• Greaseable Carrier Unit
25% Thicker Steel Backing Plate
ASV / Terex 5AT 247/257/
RDYH
CAT 247/257/267/277/287ASV / Terex 50/60/85/100
es
• Install rubber tracks fast with Hydraulic Tools
• Fits most CAT/ASV/TEREX Compact Loaders
IN KOITAALLATSNK ICARC TILUAR
Install rubber tracks fast with Hydraulic ToolsFits most CAT/ASV/TEREX Compact Loaders
T
•
Y COLLAIEGOB
Bair Part #BW9F Flange Wheel
• CAT 277 / 287 D SERIES
• TEREX / ASV SR& PT 75/80/100G/110 MACHINES
SEE SLBALIAVVAA
Bair Part #BW9F
R ETNEY CSLEEH WIE
CAT 277 / 287 D
TEREX / ASV SR
410 2BERR 2METEP
G/110
Page 34 • October 29, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2014 • Page 35
Page 36 • October 29, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Sunbelt Ag Expo Boasts More Than 100,000 Attendees in Ga.An estimated 100,000-plus atten-
dees turned out for this year’sannual Sunbelt Ag Expo on Oct.
14 to 16 in Moultrie, Ga. Known by many as “North America’s
Premier Farm Show,” this year’s expohad more than 1,200 exhibitors show-casing thousands of agricultural prod-ucts and services. Close to 150exhibitors were new to the event. Overthe years, the show has become one ofthe country’s largest expositions of farmand farm related equipment. The 1,680acre property provides plenty of wideopen space for exhibit and hands-ondemonstration areas.
This year, attendees saw SANY exca-vators for the first time, which were dis-played in the McMillan MachinerySales exhibit.
SDLG and its southeast dealers, ASCConstruction Equipment and FlaglerConstruction Equipment, said theylearned from last year’s Sunbelt AgExpo. The dealers brought an SDLGLG938L, 2.4 cu. yd. (2.2 cu m) wheelloader for display at last year’s show.Based on customers’ requests, this year,the dealers bought the new SDLGLG948L 3 cu. yd. (2.3 cu m) wheelloader to the show. As a result, the loaderwas the focal point of the exhibit andgarnered a lot of attention.
For more information, visit www.sun-beltag.com.
(This story also can be found onConstruction Equipment Guide’s Website at www.constructionequipment-guide.com.) CEG
Preston Smith (second from L), Yancey Bros. Co., talks with (L-R) Darrell Dinsmore,Justin Lingefelt and Stan Pyles, all of Darrell Dinsmore Grading, Cumming, Ga.,about the newest Cat products on display at the show.
ASC Construction Equipment and Flagler Construction Equipment representativesstand ready to promote the SDLG LG948L wheel loader. (L-R) are Brian Mason,Flagler; Nick Tullo, SDLG sales and marketing manager; and Austin Seals and MillPenny, Volvo sales of ASC.
Wes Barrett (L), Bobcat of Opelika, and David Habbard, RentalInc./Bobcat of Dothan, talk at the event.
Philippe Bisson (L), Case Construction Equipment wheel loaderproduct manager, Racine, Wis., and Randy Shavor, Case prod-uct specialist, stand ready to answer questions about the equip-ment.
A combination of representatives from JCB corporate, JCB of Georgia and MacKinnon JCB provided support for a successful showat the JCB exhibit. (L-R) are Farrin Barber, JCB; Neil Roundtree, MacKinnon JCB; and David Barker, Patrick Smith and GeorgeChaney, all of JCB corporate in Savannah, Ga.
see EXPO page 42
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2014 • Page 37
SAVE TIME • SAVE MONEY • SAVE LABOR • SAVE OIL
• No tools required• No expensive
hardware needed• No more rags
stuffed into hoses• No more messy
plastic caps• The ultimate
contamination control tool• One hand installation• Eliminate hydraulic
oil spills & clean up• Quick installation
& ease of usage• Safe for personnel
& environment• Industry acclaimed• 100% Made in USA
For more information contact Mike Pearl at914.980.8890 or email mike @ flangelock.comwww.flangelock.com
Steel Trench Shields
Florida’s COMPLETE Factory-Direct Rental Resource
Slide Rail System Build-A-Box™
TE Factor
ACTOR FFACTORY-DIRECT Sales & Rentala’s COMPLEFlorid
Rental ResourceLargest selection of USA-made trench shielding and shoring equipment.Custom shields built to your specs.
y-Direct
ACTORY-DIRECT Sales & RentalTE Factor
Largest selection of USA-made trench shielding and shoring equipment.Custom shields built to your specs.
ACTORY-DIRECT Sales & Rental
Special Operations Shoring Division.raining.Safety Trench TOSHAA T
Special Operations Shoring Division.raining.
rench ShieldsT Steel
MIAMI(954) 332-7700
MTA(813) 248-2495
Build-A-Box™
PAM(813) 248-2495
ORLANDO(407) 854-9949
Slide Rail System
All Equipment is subject to availability and is located at our Marine Facility Located in Brunswick Ga and other
locations throughout Florida.
Crane Trestle System for Sale/RentSteel Crane Trestle System (38’ width x 40’ span length, 10 spans available)Heavy duty structural steel substructure (pile cap and trusses) designed to work with 36”diameter supporting pipe pile and 12”x5’x20’ timber crane mat decking. Pipe pile and cranemats can be supplied separately upon request. This system is designed to support large crawler cranes (up to 300 ton capacity) or excava-tors requiring a temporary work platform over land or water.System is available for rent or purchase. System components are easily shipped via standard
trucking. Barge load out/delivery is also available fromour Marine Facility located in Brunswick, GA on theEast River.Substructure design drawings can be provided as part ofthe system. Turnkey supply and installation can also beoffered depending on location.
Equipment / Marine Facility for Rent or Charter � • 25’x14’ T/screw 15’ helm (Lil Rita) w/sleeping quarters 20KW Genset setup w/ anchorwinch for dredge tender
� • 25’x12’ T/screw 10’ helm (Lil Lola), w/ anchor winchfor dredge tender
� • (6) 60’x12’x4’ Sectional barges w/spuds� • Crawler Cranes from 50 – 150 ton. � • (3) CAT324 DLR Long Reach Excavators� • 300’ of Commercial Dock available for lease� • Crane & Barge loading services available
Page 38 • October 29, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Founded in 1947, J.H. Williams OilCompany Continues Growth in Fla.By Lori TobiasCEG CORRESPONDENT
Customer service is the key to success for any business,but for a family business like J.H. Williams Oil Company, itis a defining feature. It’s commitment to personal service,fast and easy access, and the promise of reliability and qual-ity care.“When customers call, they speak directly to our dis-
patcher or salesman and we will service them right away,”said Rosemary Williams Anderson, daughter of J.H.Williams Oil Company president J. Hulon Williams III. “Wehave a fleet of trucks, and we have a bulk facility at both ourTampa and Bradenton offices. Our bulk facility allows us tooffer more competitive prices.”The company offers several different brands, with
Marathon and Hess often being the top choices among com-mercial customers. Sunoco, Pure, Citgo, Chevron, Texacoand Shell also are readily available.“If there is one brand a customer really likes buying from,
we have the ability to offer it,” said J.H. Williams I.V., “butin most cases our customers buy from whatever brand is cur-rently giving the best price.”The family business was founded in 1947 when father and
son J. Hulon Williams Sr. and J. Hulon Williams Jr. joinedforces to distribute a complete line of petroleum products.But already, they had nearly twodecades of experienced, gained fromoperating several corner service sta-tions that Williams Sr. began openingin 1928.Today, the business continues to
grow, owning 17 stations, one truckstop, and supplying more than 200retail outlets. With two offices, one inTampa and one in Bradenton, thecommercial arm distributes fuel toconstruction firms, marinas, farms,government entities and bus systemsfrom a fleet of six 4,400 gal. tankwagons.In 2013, the business boasted $394
million in revenue, an increase of 3.7percent over 2012, and counts 30
employees on its payroll.Now, fourth generation members Rosemary Williams
Anderson and her brother J.H. Williams IV have joined theirfather to help steer the family business into a new era.They’ll do that adhering to the fundamental business princi-ples that have guided the family business to success for morethan 70 years. “The most successful companies expect change in the
industry, manage well and never forget the shirt sleeves ofthe past,” said J.H. Williams III.And change is coming; both in the products they offer and
the way they offer it. Bio diesel fuel is now one more optioncustomers have to choose from when they order from J.H.Williams Oil Co.The family business also is embracing new technology to
ensure efficient deliveries. “We can insert automatic tank gauges, which track the
volume in customers’ tanks,” said Williams. “That way youdon’t even have to pick up the phone. We actively review thetank readings electronically, and schedule your fuel deliver-ies according to how much remains. And now there’s a newgauge that has the ability to send alerts to our phones. It real-ly streamlines the process.”
(This story also can be found on ConstructionEquipment Guide’s Web site at www.constructionequip-mentguide.com.)CEG
Customer service is the key to success for any business, but for a family business like J.H. Williams Oil Company,it is a defining feature.
J.H. Williams Oil Company celebrates more than 70 years in business.
H&E EquipmentServiceswww.he-equipment.comARLittle Rock501-568-7867800-632-0577Springdale479-927-1672888-200-6343LAAlexandria318-443-7173800-249-8485 Baton Rouge225-356-6113800-872-1305 Bossier City318-746-5272800-643-2844 Broussard337-837-9600877-463-9914 Kenner504-467-5906800-203-1869 Sulphur337-528-2661800-258-1614
Linder IndustrialMachinerywww.linderco.comFLFt. Myers239-337-1313Jacksonville904-786-6710Ocala352-629-7585Orlando407-849-6560Pembroke Pines954-433-2800Plant City813-754-2727West Palm Beach561-863-0570NCArden828-681-5172Charlotte704-376-7554Greenville252-695-6200Greensboro336-665-0110Raleigh919-851-2030Wilmington910-254-2031
SCGreer864-877-8962North Charleston843-552-0095West Columbia803-794-6150
Lyle Machinery Co.www.lylemachinery.comMSColumbus662-243-2152Hattiesburg601-296-7556Jackson601-939-4000Magnolia601-783-2111Saucier228-832-7575
Power Equipmentwww.powerequipco.comMSSaltillo662-869-0283TNChattanooga423-894-1870Kingsport423-349-6111Knoxville865-577-5563LaVergne615-213-0900Memphis901-346-9800
Every Komatsu Tier 4 construction machine comes standardwith Komatsu CARE complimentary factory scheduled maintenance for 2,000 hours or the first 3 years, plus 2 complimentary KDPF exchanges. With Komatsu CARE you can:
• Lower your cost of ownership• Increase equipment uptime and reliability• Protect the value of your Tier 4 capital investment
It’s just part of our Program designed to deliver complete service and support solutions to Komatsu customers.
To learn more about Komatsu CAREcontact your Komatsu distributor or scanthis QR code with your smart phone.
GO WITH KOMATSU... AND GET THE ONLY TIER 4 EQUIPMENT WITH COMPLIMENTARY MAINTENANCE BUILT RIGHT IN.
SOUTHEAST KOMATSU DISTRIBUTORS
T M
s
W
8
8
8
H
W
8
8
W
8
B M
P
2
I
F
8
A
8
O
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2014 • Page 39
www.komatsuamerica.com
LOADERSFrom Komatsu - The Loader Experts
.
T M
H
.komatsuamerica.com/komatsu-carwww
e .komatsuamerica.com/komatsu-car
Rish Equipment Companywww.rish.comMDFrostburg301-689-2211VABealton540-439-0668Chesapeake757-485-2100Chester804-748-6411Coeburn276-395-6901 Salem540-380-2090Staunton540-887-8291WVBeckley304-255-4111Bluefield304-327-5124Bridgeport304-842-3511Logan304-752-9313St. Albaus304-755-3311
Tractor & EquipmentCompanywww.tractor-equipment.comALAlabaster205-621-2489Anniston256-831-2440Birmingham205-591-2131Decatur256-355-0305800-321-6865Dothan334-678-1832Mobile251-457-8991800-233-7213Montgomery334-288-6580800-832-9563Tuscaloosa 205-752-0621Tuscumbia251-275-4159FLPanama City850-763-4654Pensacola 850-505-0550GAAlbany229-435-0982800-733-0962Augusta706-798-7777800-659-3090Calhoun706-879-6200800-827-3072Columbus706-562-1801877-307-6439Forest Park404-366-0693Hoschton706-654-9850888-334-9850Kennesaw678-354-5533Macon478-745-6891Savannah912-330-7500800-827-1405
Page 40 • October 29, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Construction UnemploymentFalls to 7 Percent; Lowest in YearsConstruction employment totaled 6 mil-
lion in September, the highest total sinceMay 2009, with a 12-month gain of 230,000jobs or 3.9 percent, Sandherr noted.Residential building and specialty trade con-tractors added a combined 11,800 employ-ees since August and 129,400 (5.9 percent)over 12 months.Nonresidential building and specialty
trade contractors hired a net of 3,700 work-ers for the month and 100,300 (2.7 percent)since September 2013. However, heavy andcivil engineering contractors, which performthe majority of public-sector construction,increased their headcount by only 500 inSeptember and 29,000 (3.3 percent) over theyear amid tight government budget condi-tions.The number of workers who said they
looked for work in the past month and hadlast worked in construction fell to 604,000 inSeptember. The last time the number ofunemployed construction workers droppedthat low was August 2007, a time when the
construction industry was struggling withwidespread construction worker shortagesthat prompted project delays and increasedcosts, Sandherr cautioned.Association officials said many firms cite
the lack of local, secondary-level vocationalprograms as one of the causes for the work-er shortages. As a result, association officialscontinued to urge federal, state and localofficials to enact the series of measures theassociation identified in its WorkforceDevelopment Plan that will make it easierfor school districts, local associations andprivate firms to establish career and technicaleducation and training programs.“Labor shortages happen when a growing
industry meets a stagnant pool of qualifiedworkers,” said Sandherr. “It is time to alignour education and training systems with cur-rent economic conditions so more youngpeople can benefit from the rebound in con-struction demand.”
(This story also can be found on
Construction Equipment Guide’s Web site at
www.constructionequipmentguide.com.)
JOBS from page 1
add transportation funding back to analready-long list of self-created crisesthreatening our economic vitality.”Coalition officials noted that in July,
despite overall partisan gridlock, Congressoverwhelmingly extended authorization forthe surface transportation program andenacted a temporary funding patch for theHighway Trust Fund (HTF). That patchensures federal highway, bridge and transitinvestments will continue through next May.However, it was the fifth time in the pastseven years Congress took that approach,requiring nearly $65 billion in supplementalfunding to avoid significant cuts to trans-portation investments.On average, the HTF provides 52 percent
of the funding for highway and bridge capi-tal investments made by the nation’s statetransportation departments each year,Coalition officials added. “Congress needs to ‘keep the horse before
the cart’ and address the trust fund’s long-term revenue problem as was done in the1997 and 2004 tax bills. Then it can developand properly fund a six-year program billearly in 2015,” TCC Co-chair Pete Ruane,president and CEO of the American Road &Transportation Builders Association, said.
“And ‘status-quo’ funding levels would sim-ply perpetuate worsening traffic congestionand the inadequate physical condition of thenation’s highway and transit network.”The latest Congressional Budget Office
projections indicate Congress will need toidentify an additional $7 billion just to pre-serve highway and transit funding for the lastfour months of fiscal year 2015. Federal dataalso show maintaining current programfunding beyond 2015 will require an averageof $16 billion in additional revenues eachyear. That, Coalition officials point out, isthe revenue equivalent of a 10-cent increasein the federal gas tax.Despite widespread desire for a multi-
year federal surface transportation programreauthorization bill to boost economic com-petitiveness and job creation, such legisla-tion cannot move forward until a long-termtransportation funding solution is in place.Coalition officials are urging Congress toidentify and pass a funding HTF revenue fixto ensure Americans and the U.S. economycontinue to benefit from a world class trans-portation network.
(This story also can be found on
Construction Equipment Guide’s Web site at
www.constructionequipmentguide.com.)
Officials Urge Funding of HTFFUND from page 1
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2014 • Page 41
View Our Inventory atwww.haletrailer.com
New East Florida Spec Dumps, 24' x 96" x 60" tri-axle suspension, electric tarp
New East Walking Floor Trailers, 48' long x 102"x 13', spring suspension; Keith walking floor installed.
We Rent LowbedsWe Rent Walking Floors
ExcellentFinancingAvailable
NEW TALBERT & FONTAINE 5O & 55 TON LOWBOYS, Flat Level Deck & Raised Center, 25’ & 26’ DeckLengths, (2) King Pin Locations, Automatic 3rd Axle AirLifts, 275/70R 22.5, 3+1 Capability, In Stock!
New Landoll Slide Axle Trailers, 50'x102", air ride suspension, 20K winch,
wireless remote, PSI system & dock levelers optional
New Etnyre 35 Ton & 55 Ton Paver Special Low Boys,
Air Ride Suspension, Tandem & Triaxle
New Etnyre Asphalt Tanks 42'x96", Air RideSuspension, 7500 Gallons, Aluminum Barrel, 375Degrees, Aluminum Wheels
New Talbert 20 Ton tags, 21' deck, 6' beaver tail,17.5 wheels
NEW Fontaine Steel Flatbeds, 48’x102” SpringSliding Suspension Winches & Bulkhead Included
YOUR DEALER FOR HEAVY HAUL EQUIPMENTNEW 65-Ton Capacity Widespread Available: Talbert, Etnyre, Trail King
New Manac Steel Drop Deck Extendables 53’-71’x102” wide, 34” Deck Height, Tri-AxleSuspension, Air Lift
Talbert 35 Ton Lowboys22" Deck Height, Air Ride Suspension
Weight Laws are Changing!Heavy Haulers: we have the axles, jeeps, flip boxes and spreaders you need.
www.haletrailer.com
Concord, NC800-438-2250
Jacksonville, FL800-828-3055
New Fontaine Velocity Steel Drop Decks,48’x102”, Air Ride Spread Bulkhead and Winches
New Manac Hardox Steel Dumps, 40’x102”x100”,Single Point Susp, 87 Cu. Yds, Frameless and FrameType, Also Available w/76” Sides
New Fontaine & Talbert Dropside 55 & 60 Ton Lowboys,
26' Deck, 22.5 Wheels, Air-Ride/ Air Lift and Modular Available
New Manac Composite Drop Deck Trailers, 48’ x102”, Air Ride Spread, Sliding Winches, GalvanizedCross Members
New Talbert and Etnyre 65 Ton Wide Spread Capable Lowboys
IN STOCK
IN STOCK
We RentLowboys, BladeTrailers, Etc.
IN STOCK
IN STOCK
Page 42 • October 29, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
More Than 1,200 Exhibitors Draw Thousands to Expo
The daily parade of antique tractors is always a crowd favorite at the Sunbelt Ag Expo.
Chainsaw carvers in the Husqvarna exhibit area create pieces of wood art
Kyle Goforth (L), ag sales coordinator representative of Atlantic &Southern Equipment, and Giorgio Carera, CEO of FAE USA, showcase var-ious machine/attachment combinations
Customers stop by the Flint Equipment Company display to inspect the latest CWP(Commercial Worksite Products) machines and attachments in its exhibit area.
Dave Hunter (second from L), SANY America SE regional manager, traveled to Moultrie tolend his support for South Georgia SANY excavator dealer, McMillan Machinery Sales,Thomasville, Ga. (L-R) are Tommy McMillan, Hunter, Keri McMillan Hopkins, Jim Stalvey andRichard Sanders.
Kevin Pittman (L) and Richard Headden of Ritchie Bros. Auctioneers,Newnan, Ga., inform customers about the services the company provides.EXPO from page 36
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2014 • Page 43
Page 44 • October 29, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Third Phase Consists of Bridge Over I-110, New Ramps
10,” Harter said. “This will give motorists more options forinterstate access to the east, west and south from LameyBridge Road, D’Iberville Boulevard and Big Ridge Road.The D’Iberville Boulevard interchange will be the firstDiverging Diamond Interchange [DDI], a new design beingimplemented across the United States as a safer, more cost-efficient alternative to traditional interchanges. Adoptedfrom Europe, the DDI has been proven to significantlyreduce crashes and help traffic flow.”Gulf Equipment Corp., a family owned/operated compa-
ny based in Mobile County, Ala., serves as the prime con-tractor on the project. “This current project is actually the second phase of four,”
said John McLaughlin, Gulf Equipment Corp. general super-intendent. “Gulf Equipment Corp. constructed the first phaseas the Sangani Flyover, a $7.3 million dollar project consist-ing of a new flyover bridge, two new loop alignments andpedestrian friendly features for accessing two major retaildevelopments on both sides of SR-67. The second phase isthe I -10/110 interchange project we are currently workingon. The third phase is also under construction, with MalletteBrothers Construction. It consists of a new bridge over 1-110 and new ramps accessing Big Ridge Road. The fourthand final phase is a major elevated flyover from taking off atwestbound and landing at southbound.The project called for about 105, 000 cu. yds. (80,278 cu
m) to be hauled in from nearby local pits. The unclassifiedexcavation, about 85,000 cu. yds. (64,987 cu m), is beingused around the site to bring shoulders and non-paved areasup to grade, with the remaining being hauled off site asexcess excavation.Gulf Equipment Corp. also is installing all the storm drain
system, approximately 12,000 ft. (3,657 m) of RCP, withsizes ranging from 18 to 65 in. by 40 in. (45.7 to 165.1 by101.6 cm) RCAP. “We also self-performed all the water and sewer reloca-
tion. Sewer consisted of approximately 10,000 linear feet ofsewer pipe 20-inch, numerous new manholes and four jackand bores under I-10 and I-110, as well as two new lift sta-
tions on the project. The water relocate consisted of approx-imately 5,000 linear feet of 6-inch to 12-inch water pipe,numerous line stops and tapping valves and sleeves. The util-ity portion also called for 5,000 linear feet of steel encase-ment pipe from 6 inches to 36 inches.” Gulf Equipment Corp. also is building the new bridge
over which will be part of the new widened portion ofD’Iberville Blvd. Crews removed the old bridge viamechanical methods, instead of using explosives. “The existing bridge had to be removed over I-10 to allow
for the new bridge alignment in the old location,”McLaughlin said. “The old bridge was 402 feet long and twolanes wide. The new bridge is 502 feet long and four laneswide, with a divided island and outside shoulders. The newbridge calls for pre-stressed piling in the two abutments, fora total of 2,160 linear feet of piling and 54-inch drilled shaftsin the columns. Girders are BT-72 at 125 feet length, bridgeconcrete Class AA is approximately 1,736 cubic yards andrequires 395,594 pounds of reinforcing steel.”The biggest challenge so far has been the removal of the
old bridge. Contract specifications called for a 14-hour com-plete closure of I-10, and an elaborate detour to be installednorth of the project. “The closure could commence on a Saturday night at 7
o’clock and had to be open at 9 o’clock the next morning,”said McLaughlin. “Gulf Equipment managed and orches-trated the detour and traffic control, with help from several
surrounding agencies, as well as Mississippi Highway Patroland D’Iberville Police Department. After several weeks ofplanning, the detour was put in place. Gulf Equipment Corp.installed two feet of sand in the travel lanes. “Our subcontractor, M& M Demolition, tackled the
removal process with approximately 14 excavators withshears and hammers and other attachments to reduce thebridge to rubble and remove the structure from the roadwayand median. The rubble and dirt cushion was removed andthe roadway swept clean, as MDOT inspected the travellanes. Once all was clear, the first car passed thru the re-opened interstate at 8:40 a. m., with twenty minutes tospare.”The new bridge construction is ongoing, with girder
beams currently being installed at night. Work must be per-formed after hours, because of lane closure restrictions. Oncethe beams are set, the stay in place metal deck forms can beinstalled and deck pours can begin.Currently, the western end of the project has been graded
and stone base installed, and all but two layers of asphaltremain. Two new ramps are still under construction on theeastern most end of the project, with borrow being hauled inand the last mechanically stabilized earth retaining wallbeing constructed. This wall will be the largest, at more than30 ft. (9.1 m) tall. “This project had three separate walls, totaling more than
24,175 square feet,” McLaughlin said. “Once traffic isopened on certain new sections, two new loop ramps willneed to be completed and a large amount of old ramps willbe removed. Approximately 20,000 square yards of removalwill be required.”All of the equipment used by Gulf Equipment Corp. is
company owned fleet, the majority being Cat excavators anddozers, a John Deere 750K with Trimble GPS, as well as Catwith Trimble GPS and Cat 140M and 140H graders withTrimble. Numerous rollers from Ingersoll Rand, Volvo andCat also have been used, along with smooth drum vibratoryand pad foot vibratory. Loaders for the pipe crews consistedof several Cat 930 H’s to IT 3536s and a John Deere 724.
Gulf Equipment Corp. photoThe work has been funded through MDOT. A total of$30 million comes from the Mississippi DevelopmentAuthority, with $14 million from the Federal HighwayAdministration.
see INTERCHANGE page 72
INTERCHANGE from page 1
Gulf Equipment Corp. photoThe new bridge construction is ongoing, with girderbeams currently being installed at night.
Gulf Equipment Corp. photoThe construction, currently 70 percent complete,includes the first split diamond interchange inMississippi and the installation of the first soil nailwall in the state.
Page 46 • October 29, 2014 • www.constructionequipmentguide.com • Crawler Loaders, Dozers, Undercarriages & Parts Section • Construction Equipment Guide
Model Engine Power Weight Engine Type
hp (kw) lbs. (kg)
TD7R74 (55) 19,032 (8,633)
N/A
TD8R85 (63) 19,572 (8,878)
N/A
TD9R93 (69) 21,372 (9,694)
N/A
TD10R101 (75) 21,813 (9,894)
N/A
TD14M LGP 160 (119) 40,849 (18,529) N/A
TD14M LT 160 (119) 38,699 (17,554)N/A
TD15M LT 190 (141) 51,065 (23,163)N/A
TD15M LGP 6-WAY 190 (141) 48,874 (22,169)N/A
TD20M240 (179) 63,681 (28,886)
N/A
TD25M330 (246) 94,494 (42,862)
N/A
TD40E515 (384) 154,351 (70,014)
N/A
TD15M LANDFILL 190 (141) 53,461 (24,250)N/A
TD20M LANDFILL 240 (179) 67,197 (30,481)N/A
TD25M LANDFILL 330 (246) 95,418 (43,282)N/A
Loaders605K 110 (83) 26,940 (12,220) J. Deere PowerTech PWX 4.5 L 655K 145 (110) 40,614 (18,422) J. Deere PowerTech PVX 6068755K 190 (141.7) 45,178 (20,492) J. Deere PowerTech PVX 6068 Dozers450J 70 (52) 16,283-17,525 (7,386-7,949) J. Deere PowerTech M 4045550K 85 (63) 19,290-20,272 (8,750-9,195) J. Deere PowerTech PWX 4045650K 101 (75) 19,599-20,624 (8,890-9,355) J. Deere PowerTech PWX 4045700K 125 (93) 30,225-31,240 (13,710-14,170) J. Deere PowerTech PVX 6068750K 155-165 (116-123) 34,377-37,595 (15,593-17,053) J. Deere PowerTech PVX 6068850K 187-205 (139.5-152) 42,499-47,705 (19,295-21,684) J. Deere PowerTech PVX 6068 850K WH 200 (151) 48,906 (22,183) J. Deere PowerTech PVX 6068950J 247 (184) 56,361-59,255 (25,565-26,877) Liebherr D936-L A6 950J WH 247 (184) 58,462 (26,518) Liebherr D936-L A6 1050J 335 (250) 77,843 (35,309) Liebherr D946-L A6 1050J WH 335 (250) 80,967 (36,726) Liebherr D946-L A6 764 HSD200-210 (149-157) 34,000 (15,422) J. Deere PowerTech Plus 6068H
DRESSTA
Model Engine Power Weight Engine Type
hp (kw) lbs. (kg)
Model Engine Power Weight Engine Typehp (kw) lbs. (kg)
D39EX-23 20,749 (9,410) 105 (78) Komatsu SAA4D95LE-6
D39EXi-23 20,922 (9,510) 105 (78) Komatsu SAA4D95LE-6
D39PX-23 21,675 (9,830) 105 (78) Komatsu SAA4D95LE-6
D39PXi-23 21,848 (9,931) 105 (78) Komatsu SAA4D95LE-6
D51EXi-22 27,381(12,446) 130 (97) Komatsu SA6D107E-1
D51PXi-22 29,057 (13,208) 130 (97) Komatsu SA6D107E-1
D61EX-23 39,099 (17,735) 168 (125) Komatsu SAA6D107E-2
D61EXi-23 39,441 (17,890) 168 (125) Komatsu SAA6D107E-2
D61PX-23 41,138 (18,660) 168 (125) Komatsu SAA6D107E-2
D61PXi-23 41,381 (18,770) 168 (125) Komatsu SAA6D107E-2
D65EX-17 44,355 (20,120) 205 (153) Komatsu SAA6D114E-5
D65WX-17 45,945 (20,840) 205 (153) Komatsu SAA6D114E-5
D65PX-17 47,335 (21,470) 205 (153) Komatsu SAA6D114E-5
D65EX-17 WH 48,865 (22165) 205 (153) Komatsu SAA6D114E-5
D65WX-17 WH 54,835 (24,873) 205 (153) Komatsu SAA6D114E-5
D65PX-17 WH 51,268 (23,225) 205 (153) Komatsu SAA6D114E-5
D85EX-15E0 61,950 (28,100) 264 (197) Komatsu SAA6D125E-5
D85PX-15E0 60,960 (27,650) 264 (197) Komatsu SAA6D125E-5
D85EX-15E0 SL 62,245 (28,234) 264 (197) Komatsu SAA6D125E-5
D155AX-7 87,100 (39,500) 354 (264) Komatsu SAA6D140E-6
D155AX-7 WH 91,515 (41,510) 354 (264) Komatsu SAA6D140E-6
D155AX-8 89,300 (40,500) 354 (264) Komatsu SAA6D140E-7
D275AX-5E0 113,600 (51,530) 449 (335) Komatsu SAA6D140E-5
D275AX-5E0 SL 116,528 (52,856) 449 (335) Komatsu SAA6D140E-5
D375A-6 157,940 (71,640) 610 (455 ) Komatsu SA6D170E-5
D475A-5E0 238,960 (108,390) 890 (664 ) Komatsu SDA12V140E-3
D475ASD-5E0 249,560 (113,200) 890 (664 ) Komatsu SDA12V140E-3
KOMATSU
JOHN DEEREModel Engine Power Weight Engine Typehp (kw) lbs. (kg)650L LGP 74 (55) 17,550 (7,959) CASE 445TA/EG7a Tier III650L LT 74 (55) 16,250 (7,370) CASE 445TA/EG7a Tier III650L WT 74 (55) 16,800 (7,619) CASE 445TA/EG7a Tier III750M LGP 92 (66) 21,180 (9,607) CASE F5HFL413J Tier IV Interim750M WT 92 (66) 20,679 (9,379) CASE F5HFL413J Tier IV Interim750M LT 92 (66) 20,040 (9,089) CASE F5HFL413J Tier IV Interim850M LGP 112 (84) 22,830 (10,355) CASE F4HFE413P Tier IV Interim850M WT 112 (84) 22,330 (10,129) CASE F4HFE413P Tier IV Interim850M LT 112 (84) 21,560 (9,779) CASE F4HFE413P Tier IV Interim1150M LGP 127 (95) 32,637 (14,804) CASE F4HFE613F Tier IV Interim1150M WT 127 (95) 32,174 (14,594) CASE F4HFE613F Tier IV Interim1150M LT 127 (95) 31,134 (14,122) CASE F4HFE613F Tier IV Interim1650M LGP 150 (112) 39,550 (17,939) CASE F4HFE6132 Tier IV Interim1650M WT 150 (112) 38,650 (17,531) CASE F4HFE6132 Tier IV Interim1650M XLT 150 (112) 37,750 (17,123) CASE F4HFE6132 Tier IV Interim2050M LGP 214 (160) 48,773 (22,123) CASE F4HFE613W Tier IV Interim2050M WT 214 (160) 46,891 (21,269) CASE F4HFE613W Tier IV Interim2050M XLT 214 (160) 45,414 (20,599) CASE F4HFE613W Tier IV Interim2050M LT 214 (160) 44,563 (20,213) CASE F4HFE613W Tier IV Interim
CASE
Model Engine Power Weight Engine Type
hp (kw) lbs. (kg)LIEBHERR
Crawler Loaders
LR 624141 (105) 37,245-40,893 (16,894-18,549) D 934 S A6
LR 634173 (129) 45,737-50,032 (20,746-22,694) D 934 L A6
DozersPR 724
161 (120) 36,729-39,738 (16,659-18,024) D 934 L A6
PR 736201 (150) 44,530-54,230 (20,200-24,600) D 934 A7
PR 746248 (185) 63,710-67,900 (28,900-30,800) D 936 A7
PR 756336 (250) 84,430-90,720 (38,300-41,150) D 946 A7
PR 764416 (310) 97,490-116,150 (44,220-52,685) D 9508 A7A7
see CHART page 54
Construction Equipment Guide • Crawler Loaders, Dozers, Undercarriages & Parts Section • www.constructionequipmentguide.com • October 29, 2014 • Page 47
Page 48 • October 29, 2014 • www.constructionequipmentguide.com • Crawler Loaders, Dozers, Undercarriages & Parts Section • Construction Equipment Guide
Critical Decisions Make All the Difference in Dozer LifespansBy Giles LambertsonCEG CORRESPONDENT
Bulldozers are tough machines, and own-ers and operators can extend their machines’working lives by making critical decisionsabout their undercarriage. The decisionsbegin before a new machine is ordered fromthe dealership.“One type of undercarriage does not fit all
applications,” warned Tim Nenne, aCaterpillar undercarriage market profession-al. Nenne began working with drivetrain andundercarriage issues at the Caterpillar TechCenter almost 25 years ago. “Now, we’reoffering more undercarriage than everbefore.”
Same, But DifferentWhy offer undercarriage variations? It’s
true that in the rumbling world of trackedequipment, the machines have some thingsin common. The continuous steel or rubbertracks that move dozers, excavators, mobilecranes, track loaders of all sizes, and othermachinery all have sprockets that drivelinked plates with raised grousers for trac-tion. The chained shoes cycle across idlersand rollers and under road wheels … aroundand around and around. But there are differences in the machines,
too. How a piece of equipment is used varieswidely and undercarriage reflects that.Consider dozers and excavators, two of themainstay pieces of equipment in any earth-moving contractor’s yard: They have greatlydifferent undercarriage requirements. Adozer and excavator can be operated side byside in a pit or a site preparation project andtheir undercarriage experiences much differ-ent stresses.Dozers have to be moving across a job
site to be productive. Sitting still, a dozer isjust a lump of iron. Until its blade startspushing or its ripper ripping, it might as wellbe a big boulder. However, an excavator canrumble up to a dig site, the tracks on themachine stop moving and subsequently notexperience a full revolution for an extendedtime. Yet while the tracks are mostly still, themachine is busy digging a hole with itsscoop, or swinging over and dropping a con-crete box into a hole using its boom, or load-ing trucks from a replenishing pile of mate-rial.“An excavator undercarriage is mostly
just a platform,” Nenne explained, so the liferollers and link assemblies on excavators candiffer greatly from those on dozers. On theother hand, undercarriage on track loadersmore or less replicates the technology on,say, a D6, because the two machines’ func-
tion is more-or-less the same.How Is It Used?
So the first critical undercarriage decisionfor a contractor buying a piece of trackedequipment is to know how it will be used. “The big thing is this: Choose the under-
carriage that best meets all of your needs,”Nenne said. “Consider the machine type, themachine’s application, the material it will beworking in, even your financial situation.Choose the undercarriage that will providethe best performance. “It always comes back to choosing the
right undercarriage,” he said. “You savemajor dollars in the end if you choose cor-rectly. It eventually will come back and costyou more if you don’t.” Nenne added that the most common error
a contractor makes is not fully specifying theweight of the machine to be carried on anundercarriage. It might be a 25-ton dozer asa base model, but one blade or another canalter the weight, as can the addition of a rip-per or a winch. The total machine weight isthe operative number in choosing the rightundercarriage set-up.The next most important consideration for
selecting an undercarriage is the conditionsin which it will be operated. “It is so important to understand the appli-
cation of a machine,” Nenne said. “Whattype of material will it be running in? Whatlevel of abrasion will there be? What areyour hours of use for the machine? Howlong do you plan to keep it? All of that deter-mines which undercarriage to choose.”That’s why Caterpillar developed a new
General Duty line of undercarriage, whichNenne described as the “Volkswagen” line,an allusion to the economical but well-engi-neered VW “Bug” the German manufactur-er introduced to the United States in the1960s. General Duty is the lowest-costundercarriage option and will meet the needsof contractors in general purpose, moderate-use dozer situations.Cat Heavy Duty Undercarriage targets
most Cat customers and is for machines thatare operated many hours a day, every day —the high-production machines found onmany work sites. Cat SystemOneUndercarriage is the third option and also isaimed at high-use machines. However,SystemOne incorporates rotating bushings
and extended-life sprockets, idlers androllers. The system reduces maintenancecosts and lengthens the operating life of var-ious components.So from day one a buyer makes numerous
set-up decisions that will affect the bottomline. Example: A dozer to be operated inforestry work, crawling over stumps andsuch, needs a heftier undercarriage than oneloading some gravel now and then in anequipment yard. Another example: The typeof soil underneath the operating machineand the degree of slope at a work site candetermine whether to use standard track,wide track, or low ground compaction shoes.And so on.In the end, there are consequences from
having the wrong undercarriage on amachine. Nenne said the consequences canbecome evident in pretty short order. “If it’s a matter of a shoe width error, you
might notice that in the first hour whenthere’s a buildup of packed material in theundercarriage.” Other misjudgments may not show up for
a month or more as parts begin to break orbecome dysfunctional under stress.
Operator, Maintenance ErrorsYet even when a tracked machine has an
appropriate undercarriage, problems still candevelop if an operator fails to follow best-practices in the driver’s seat. Nenne said themost frequent failing of this type is habitualuse of a big tracked machine for nonessentialtravel.“Don’t use a tractor as a pickup truck,” he
said. “They are very expensive to move. Forexample, don’t drive the machine across ajob site to get it fueled. Drive the fuel truckto it. It is not the number of hours that wearsout an undercarriage, it is the number ofmiles or kilometers. Limit the miles, limitthe amount of movement.”The kind of movement also can exact a
toll on an undercarriage. Nenne recommend-ed that operators limit high-speed reversemovement, or limit traveling in reverse ingeneral. While SystemOne handles high-speed reverse better than other systems,additional bushing wear always occurs whena machine is traveling backward on itstracks. Another tip: Turning a dozer in thesame direction all the time causes unevenwear on undercarriage components, so oper-ators should try to alternate their turns.“An operator has the ability to make or
break an undercarriage,” Nenne said. Hesaid most operator abuse or misuse of atracked machine occurs on rubber-trackedmini-loaders, which are apt to be run by less-
Tim Nenne is a Caterpillar undercarriage market professional. Nenne beganworking with drivetrain and undercarriage issues at the Caterpillar Tech Centeralmost 25 years ago.
see CATERPILLAR page 54
“It always comesback to choosing theright undercarriage.You save major dollars in the end if you choose correctly…”
Tim NenneCaterpillar
Construction Equipment Guide • Crawler Loaders, Dozers, Undercarriages & Parts Section • www.constructionequipmentguide.com • October 29, 2014 • Page 49
IT’S GOT YOUR FINGERPRINTS ALL OVER IT.
Like all of our equipment, the850K was designed with exten-sive input by owners and oper-ators like you. We listened andresponded with numerous K-Series enhancements, includ-ing additional power and weightfor increased productivity. AnEPA Interim Tier 4 diesel enginefor work in nonattainmentareas. Spacious redesigned cabthat’s noticeably quieter andmore comfortable. And best-in-class serviceability features,such as an innovative easy-to-clean “V-Cool” package. Add tothose, the unsurpassed operat-ing ease and maneuverabilityoperators have come to expectfrom our crawlers, and the850K is an obvious choice. To get your hands on one, see your John Deere dealer.
Albany, GA229/888-1212Atlanta, GA
404/691-9445Grovetown, GA706/855-5440Columbus, GA
706/687-3344Braselton, GA
770/965-1889Macon, GA
478/788-1586
Adairsville, GA770/773-9857Brunswick, GA912/264-6161Savannah, GA
912/964-7370Dothan, AL
334/794-8691Troy, AL
334/566-4181Aynor, SC
843/358-5688
West Columbia, SC803/794-9340Simpsonville, SC864/963-5835Ladson, SC
843/572-0400Andrews, SC
843/221-4940Walterboro, SC843/539-1420
R.W. MOORE
EQUIP. cO.
Main Office
Garner, NC919/772-2121Ahoskie, NC
252/332-5550Hope Mills, NC910/424-1200New Bern, NC
252/638-5838Greenville, NC
252/758-4403Castle Hayne, NC910/675-9211
Ashland, VA804/798-6001Manassas Park, VA
703/631-8500Winchester, VA540/667-9777Richlands, VA
276/596-9440Asheville, NC
828/667-0176
Charlotte, NC704/597-0211800/532-6797Greensboro, NC336/668-2762800/632-0376Mt. Gilead, NC910/439-5653800/692-9175Salem, VA
540/380-2011
cOASTAl
EQUIPMENT
cORP.
www.coastalequipment.netMain Office
504 South MilitaryHwy.
Virginia Beach, VA23464
757/424-1900Yorktown, VA
757/898-1900
Nashville, TN615/501-8600Chattanooga, TN423/855-0633Knoxville, TN
865/546-3207Kingsport, TN
423/349-5001Louisville, KY
502/253-3721Richmond, KY
859/623-2030
Bowling Green, KY270/842-3400London, KY
606/862-8447Lutz, FL
813/995-0841Riverview, FL
813/621-4902Sarasota, FL
941/752-1300Fort Myers, FL
239/334-3627
Miami, FL305/592-5740
Pompano Beach, FL954/977-9541West Palm Beach,
FL561/848-6618Orlando, FL
407/299-1212
flINT EQUIPMENT cOMPANy JAMES RIVER EQUIPMENT NORTRAX
,
u
a e
M a 5
,
4
Page 50 • October 29, 2014 • www.constructionequipmentguide.com • Crawler Loaders, Dozers, Undercarriages & Parts Section • Construction Equipment Guide
Case Construction Equipment’s M Series line of dozersincludes five models ranging from 92 to 214 hp. Accordingto the company, M Series dozers were designed from theground up and take into account extensive customerresearch, testing and feedback related to durability, produc-tivity, controls, comfort and serviceability. Key featuresfound on M Series dozers include enhanced drawbar pull,increased horsepower ratings, the first selective catalyticreduction (SCR) technology built into a dozer, fuel savingsup to 14 percent, industry leading visibility, new versatilecontrols and a pressurized cab for optimal comfort, accord-ing to the manufacturer. The new models include the 750M(92 hp), 850M (112 hp), 1150M (127 hp), 1650M (150 hp),and 2050M (214 hp).
Pushing ProductivityM Series dozers deliver power and productivity through
enhanced drawbar pull (models 750M through 1650M),increased horsepower ratings, proven SCR engine technolo-gy, a hydrostatic drive system and an advanced load man-agement system. The advanced load management systemautomatically reduces track speed (increasingtorque) with a heavier load on the blade andincreases track speed (reducing torque) with alighter load on the blade, ensuring the machine isworking at optimal power and efficiency.
Exclusive Tier IV Interim Technologyfor Dozers
Case is the first heavy equipment manufactur-er to build proven SCR engine technology into adozer to meet Tier IV Interim standards, accord-ing to the manufacturer. The engines on models850M through 2050M are built by FiatPowertrain Technologies (FPT) and offer advan-tages in terms of maintenance (no regenerationor diesel particulate filter to maintain) and fuelefficiency (some models experience fuel savingsup to 14 percent). One of the greatest advantagesof SCR in this application relates to machine per-formance. SCR is well suited for dozers becauseit lets the engine run at peak performance under variableloads without compromising the power or drawbar pull thatachieves the brute force required for earthmoving. The 750M, designed primarily for the rental market, fea-
tures a cooled exhaust gas recirculation (CEGR) engine alsoproduced by FPT. This emissions treatment requires dieselparticulate filter maintenance but no end-user involvement infilling diesel exhaust fluid (DEF).
Giving Control to the OperatorControl customizations allow the operator to better tailor
machine performance to job site conditions, including theability to set blade sensitivity (1150M through 2050M),steering sensitivity and shuttle sensitivity to smooth, moder-ate or aggressive. This allows the operator to adjust machineresponsiveness and controls to their preferences and groundconditions. A new electro-hydraulic joystick further simpli-fies operation by providing better feel and responsiveness tothe operator. Fingertip blade shake allows for quick bladecleaning, and a grading mode reduces blade speed by 40 per-cent for increased accuracy. Each M Series dozer is alsocompatible with blade control technologies from LeicaGeosystems, Topcon and Trimble to match operator prefer-ence.
Cab Built for Visibility, ComfortThe models feature a cab-forward design with floor-to-
ceiling glass doors to provide enhanced visibility down to theblade. A sloped hood and the position of the operator in thecab provide excellent visibility to the ground in front of themachine. M Series dozers feature a sealed and pressurized cab that
helps keep dust and other materials out of the operating envi-ronment. Noise is significantly reduced over previous gener-ations down to 75 dBa, helping to reduce operator fatigue.Amenities such as a factory-installed radio and environmen-tal controls further make this a more comfortable dozer cab.
Built to Last — Easy to MaintainThe M Series dozers were designed to withstand the
harshest of environments. This includes a box-style C-framebuilt for heavy earthmoving and a cooling system that is test-ed under maintained heavy load conditions and designed tooptimize engine and hydraulic temperatures. Additional com-ponents, including cylinders, the electrical system and the rip-pers have been engineered to work in the toughest conditions. All daily service checks —including hydraulic compo-
nents, filters and electrical components — are accessiblefrom the ground and do not require hand tools for access.
Case ProCare Provides Peace of MindAll M Series dozers come standard with Case ProCare,
the factory-provided heavy machine coverage. ProCareincludes a three-year, 3,000-hour full-machine factory war-ranty; three-year, 3,000-hour planned maintenance contract;and a three-year Advanced Case SiteWatch telematics sys-tem. Case ProCare, when combined with Case’s extensiveREMAN and undercarriage offering, help businessesacquire new equipment with confidence knowing that oper-ating costs will be predictable for the first three years of own-ership.
(This story also can be found on Construction EquipmentGuide’s Web site at www.constructionequipmentguide.com.)
Case M Series Includes Models Ranging From 92 to 214 hp
The 750M, designed primarily for the rental market, features acooled exhaust gas recirculation (CEGR) engine also producedby FPT.
The 2050M features a number of new enhancementsthat focus on power and efficiency.
The new M Series dozers deliver power and productiv-ity through best-in-class drawbar pull (including the1650M, pictured here), increased horsepower ratings,proven SCR engine technology, a hydrostatic drive sys-tem and an advanced load management system.
The Case 850M LT is put through its paces on thegrounds of Case’s Customer Center during the unveil-ing of the M Series dozers in Tomahawk, Wis.
Construction Equipment Guide • Crawler Loaders, Dozers, Undercarriages & Parts Section • www.constructionequipmentguide.com • October 29, 2014 • Page 51
RISH EQUIPMENT COMPANYwww.rish.com
Bluefield, WV • 304/327-5124Chesapeake, VA • 757/485-2100
Chester, VA • 804/748-6411Coeburn, VA • 276/395-6901
Opal, VA • 540/439-0668Salem, VA • 540/380-2090
Staunton, VA • 540/887-8291
POWER EQUIPMENTwww.powerequipco.com
Knoxville, TN • 865/577-5563LaVergne, TN • 615/213-0900
Chattanooga, TN • 423/894-1870Kingsport, TN • 423/349-6111Memphis, TN • 901/346-9800Saltillo, MS • 662/869-0283
LINDER INDUSTRIALMACHINERY
www.linderco.com
www.facebook.com/linderindustrialmachinery
FloridaFt. Myers • 239/337-1313
Jacksonville • 904/786-6710Ocala • 352/629-7585
Orlando • 407/849-6560Pembroke Pines • 954/433-2800
Plant City • 813/754-2727West Palm Beach • 561/863-0570
North CarolinaAsheville • 828/681-5172Charlotte • 704/376-7554Greenville • 252/695-6200High Point • 336/665-0110Raleigh • 919/851-2030
Wilmington • 910/254-2031
South CarolinaColumbia • 803/794-6150
Greer • 864/877-8962North Charleston • 843/552-0095
TRACTOR & EQUIPMENTCOMPANY
www.tractor-equipment.com
AlabamaAlabaster • 205/621-2489Anniston • 256/831-2440
Birmingham • 205/591-2131Decatur • 256/355-0305Dothan • 334/678-1832Mobile • 251/457-8991
Montgomery • 334/288-6580Shoals Area • 256/383-5666Tuscaloosa • 205/752-0621
FloridaPanama City • 850/763-4654Pensacola • 850/505-0550
GeorgiaAlbany • 229/435-0982Atlanta • 404-366-0693Augusta • 706/798-7777Calhoun • 706/879-6200
Columbus • 706/562-1801Hoschton • 706/654-9850Kennesaw • 678/354-5533
Macon • 478/745-6891Savannah • 912/330-7500
find us on
DOZERSFrom Komatsu – The Dozer Experts
Page 52 • October 29, 2014 • www.constructionequipmentguide.com • Crawler Loaders, Dozers, Undercarriages & Parts Section • Construction Equipment Guide
Komatsu America Corp. Launches D65-18 Crawler DozerKomatsu America Corp.’s
D65EX/PX/WX-18 crawler dozers are pow-ered by a more powerful net 217 hpKomatsu SAA6D114E-6 engine that is EPATier IV Final emissions certified. A standard (EX), low ground pressure
(PX) and a wide (WX) track model areavailable to offer customers flotation andweight distribution options that best matchtheir applications. Operating weight rangesfrom 45,525 to 49,690 lbs. (20,649 to 25,539kg) depending on the version. The D65-18 combines the SIGMADOZ-
ER blade with an automatic transmissionwith torque converter lock-up to achieveincreased productivity and fuel economy. AKomatsu 6-way power angle tilt (PAT) bladealso is available for all models. The D65-18 is equipped with the latest
KOMTRAX remote monitoring technologywith data access via the web or via KOM-TRAX Mobile on your smart phone. Inaddition to providing data such as fuel levels,operating hours, location, cautions andmaintenance alerts, KOMTRAX has beenfurther enhanced to monitor AdBlue/DEFlevels, ambient air temperatures and pres-sures. A new operator identification systemreports key operating information for multi-ple operators. A new auto idle shutdownfunction helps improve operating costs byreducing unnecessary idle time.Special features of these new crawler doz-
ers include:
Komatsu EPA Tier IV FinalEmission Certified Engine —
Productive, Dependable, EfficientKomatsu’s EPA Tier IV Final engines are
built on the strength of its Tier IV Interimfoundation. By integrating selective catalystreduction (SCR), the Tier IV Final enginefurther reduces NOx emissions usingAdBlue/DEF. The Komatsu Tier IV Finalengine uses an advanced electronic controlsystem to manage the air-flow rate, fuelinjection, combustion parameters, and aftertreatment functions to optimize perform-ance, reduce emissions, and provideadvanced diagnostic capability. The result islower fuel consumption with no loss of per-formance. Komatsu continues to use aKomatsu variable geometry turbocharger(KVGT) and an exhaust gas recirculation(EGR) valve for more precise temperatureand air management control as well aslonger component life. To ensure product reliability and durabili-
ty in demanding conditions, Komatsu devel-oped the entire system, including the controlsoftware which is critical to the effectiveoperation of the aftertreatment system. Thiscontrol system also is integrated into themachine’s on-board diagnostics systems andKOMTRAX, Komatsu’s standard telemat-ics system.
Diverse Choice of Blades forVersatility and PerformanceThe D65EX and WX are equipped with
SIGMADOZER, providing the machinewith a large blade capacity of 7.34 and 7.72cu. yds. (5.6 and 5.9 cu m) respectively.Based on a completely new excavation the-ory, SIGMADOZER dramatically improvesdozing performance and increases produc-tivity by up to 15 percent over conventionalsemi-u blades. The Komatsu designed bladeincreases soil-holding capacity while simul-taneously reducing sideway spillage becauseit digs and rolls material up at the center ofthe blade. SIGMADOZER also reduces dig-ging resistance producing a smoother flowof material enabling the dozing of largeramounts of soil with less power, accordingto the manufacturer. A durable pat blade also is available for
each model. The manually adjustable bladepitch further expands the versatility and pro-ductivity in many applications.
Automatic Shift TransmissionImproves Fuel Economy
The D65-18 has a new automatic trans-mission with lock up torque converter thatreduces fuel consumption and offers greaterpower train efficiency. The lockup mechan-ics of the torque converter automaticallytransfer engine power directly to the trans-mission, reducing fuel consumption by up to10 percent. Two gearshift modes — automatic or
manual — can be easily selected to fit theappropriate application: automatic for allgeneral dozing and manual for dozing andripping rough ground.E and P modes help match machine per-
formance to the application. E mode is cho-sen for all general dozing, leveling andspreading applications providing ade-quate speed and power while savingup to 10 percent fuel usage. P modeis chosen for heavier applicationswhere engine power has priorityover fuel consumption.
Ergonomic Joystick Controls forEase of Operation and ComfortKomatsu’s palm command control sys-
tem (PCCS) gives operators maximum con-trol, offering a relaxed posture and superbfine control to minimize operator fatigue.The pilot controlled hydraulic blade and rip-per control joystick offer excellent blade andripper fine control. Powerful turns under various work condi-
tions are achieved with the hydrostatic steer-ing system (HSS) to transmit power to bothtracks without interruption. Counter-rotationis available in neutral for minimum turningradius, providing excellent maneuverability
Cab Design Creates OptimalOperator Environment
The crawler dozer’s comfortable caballows the operator to concentrate on thework at hand for increased productivity. Thelarge cab is integrated with ROPS andincludes a standard air suspension seat withheat.The cab provides a noticeably quiet work
environment with viscous cab mounts. Alarge 7 in. high-resolution color LCD moni-tor in the cab displays all machine informa-tion. A comfortable standard air suspensionseat with heat further enhances operatorcomfort. A rear-view monitoring system isstandard and can be set to synchronize withreverse operation.
Convenient Maintenance andReduced Operation Costs
Recognizing that maintenance is criticalfor successful equipment uptime, Komatsuhas designed the D65-18 with easy routinemaintenance in mind. Daily engine checksare grouped at the left-hand side of theengine compartment. A manually reversingfan allows for quick cleaning of the radiator.The D65-18 also comes standard with theparallel link undercarriage system (PLUS).This rotary bushing system doubles theundercarriage life compared to prior conven-tional systems, significantly lowering own-ing and operating costs.All Komatsu Tier IV machines come with
Komatsu Care. Komatsu Care providescomplimentary scheduled maintenance forthe first three years or 2,000 hours (whichev-er occurs first.) It also includes a 50-pointinspection at each service and two compli-mentary KDPF exchanges in the first fiveyears.For more information, visit www.komat-
suamerica.com. (This story also can be found on
Construction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)
The D65-18 combines the SIGMADOZERblade with an automatic transmission
with torque converter lock-up to achieveincreased pro-ductivity andfuel economy.
Construction Equipment Guide • Crawler Loaders, Dozers, Undercarriages & Parts Section • www.constructionequipmentguide.com • October 29, 2014 • Page 53
» The #1 Selling Rubber Track Brand In America! »
Ashland, VA » Jacksonville, FL » Dallas, TX » Cincinnati, OH » Portland, OR » Sacramento, CA » Schenectady, NY
Order online anytime » depparts.com »800-365-7260
WE ACCEPT
We Keep Equipment Moving!Call me today, I’ll be glad to help you!
~ Danny
REPLACEMENT UNDERCARRIAGE
982,972®TAATCkaTTa,®gnatsuMeG,®tacboB
MECALPERRRACREDNU
nalhsA992&,®ihcuek
,®lhe
TNEMEGAIR
7e
-653-008llaD»LF,ellivnoskcaJ»AVVA,dn
S1#ehTTh»
60r
27 »drO
troP»HO,itannicniC»XT,sal
BkcarTTrrebbuRgniinlllle
m
»
oc.strapped»tynaenilnored
»AC,otnemarcaS»RO,dnalt
!aciremAnIdnar
»memit
YN,yy,datcenehcS
TPECCAEWWE
5505 Caterpillar Drive, Apex, NC 27539919-387-1050 • 888-526-9740 • www.tractortracs.com
Caterpillar®
John Deere®
Komatsu®
Case®
Hitachi®
Liebherr®
Volvo®
Samsung®
Kobelco®
Fiat-Allis®
Others...
Undercarriage • Tracks • Track Pads • Roller • Idlers • Sprockets • Cutting Edges • Bucket Teeth • Rubber TracksAlso Stock Undercarriage Parts for Bobcat®, Takeuchi®, Gehl®, Mustang® & New Holland®
Tractor Tracs Inc.Undercarriage Specialists
Call For aFREEESTIMATE!
Surf the Internet to the News, Equipmentand all the information
you need to keep up withthe Construction industry
@www.construction
equipmentguide.com
Page 54 • October 29, 2014 • www.constructionequipmentguide.com • Crawler Loaders, Dozers, Undercarriages & Parts Section • Construction Equipment Guide
Model Engine Power Weight Engine Type
hp (kw) lbs. (kg)
CATERPILLAR
Crawler Dozers LGP
D3K2 LGP 80 (60) 18,525 (8,403) Cat C4.4 ACERT
D4K2 LGP 92 (68) 18,761 (8,510) Cat C4.4 ACERT
D5K2 LGP 104 (78) 21,266 (9,646) Cat C4.4 ACERT
D6K LGP 125 (93) 29,690 (13,467) Cat C6.6 ACERT
D6K2 LGP 130 (97) 30,574 (13,868) Cat C6.6 ACERT
D6N DS-LGP 150 (112) 39,112 (17,741) C6.6 ACERT
D6N DS-LGP (Tier IVi) 150 (112) 39,646 (17,983) Cat C6.6 ACERT
D6N DS-LGP waste handler 150 (112) 42,454 (19,257) Cat C6.6 ACERT
D6N DS-LGP waste handler (Tier IVi)150 (112) 19,499 (8,845) Cat C6.6 ACERT
Medium Crawler Dozers LGP
D6T LGP 205 (152.9) 49,489 (22,447) Cat C9.3 ACERT
D6T LGP waste handler 205 (152.9) 54,791 (24,852) Cat C9.3 ACERT
D7E LGP 235 (175.2) 62,886 (28,524) Cat C9.3 ACERT
D7E LGP waste handler 235 (175.2) 68,123 (30,900) Cat C9.3 ACERT
D8T LGP 310 (231.2) 87,733 (39,795) Cat C15 ACERT
D8T LGP waste handler 310 (231.2) 91,270 (41,399) Cat C15 ACERT
Model Engine Power Weight Engine Type
hp (kw) lbs. (kg)
CATERPILLAR CONTD.
Crawler Dozers Non LGP
D3K2 XL 80 (60) 17,544 (7,958) Cat C4.4 ACERT
D4K2 XL 92 (69) 18,080 (8,201) Cat C4.4 ACERT
D5K2 XL 104 (78) 20,534 (9,314) Cat C4.4 ACERT
D6K XL 125 (93) 28,409 (12,886) Cat C6.6 ACERT
D6K2 XL 130 (97) 29,346 (13,311) Cat C6.6 ACERT
D6N DS-XL 150 (112) 36,392 (16,507) Cat C6.6 ACERT
D6N XL Tier IVi 150 (112) 36.392 (16,507) Cat C6.6 ACERT
D6N XL Waste Handler 150 (112) 38,224 (17,338) Cat C6.6 ACERT
D6N XL Waste Handler Tier IVi 150 (112) 38,224 (17,338) Cat C6.6 ACERT
D6T XL (Tier IVF) 207 (154) 46,263 (20,985) Cat C9.3 ACERT
D6T XL Waste Handler (Tier IVF) 207 (154) 51,563 (23,389) Cat C9.3 ACERT
D6T XW (Tier IVF) 207 (154) 48,034 (21,788) Cat C9.3 ACERT
D7E235 (175) 57,441 (26,055) Cat C9.3 ACERT
D7E Waste Handler 235 (175) 63,537 (28,820) Cat C9.3 ACERT
D8T310 (231) 87,733 (39,795) Cat C15 ACERT
D8T Waste Handler 310 (231) 85,650 (38,850) Cat C15 ACERT
D9T410 (306) 94,265 (42,758) Cat C18 ACERT
D9T Waste Handler 410 (306) 109,705 (49,761) Cat C18 ACERT
D10T580 (433) 146,499 (66,451) Cat C27 ACERT
D10T Waste Handler 580 (433) 144,986 (65,765) Cat C27 ACERT
D11T850 (634) 208,589 (94,614) Cat C32 ACERT
D11T CD 850 (634) 220,385 (99,965) Cat C32 ACERT
D10T2600 (447) 139,010 (63,054) Cat C27 ACERT
D9T (Tier IV Final) 436 (325) 95,917 (43,507) Cat C18 ACERT
D9T Waste Handler (Tier IVF) 436 (325) 110,471 (50,109) Cat C18 ACERT
CHART from page 46
Simply Cleaning Debris From Undercarriage Lowers Coststrained operators. But owners of huge dozersalso can incur extra operation and mainte-nance costs when jockeys operate themachines inefficiently.Field service personnel or shop mechan-
ics have a checklist of inspections for anundercarriage, and Nenne believes track ten-sion is checkpoint number one. If the linksare too tight, the system wears more quicklyand more fuel is expended. Proper tensiondepends on the application and working con-ditions.“Checking the track tension is the single
biggest thing you can do,” Nenne said. “Youcan’t control an application of a machine oroperating conditions, but you can controltrack tension.”He said operators have the first responsi-
bility to keep the track properly tensed. Ifworking in dust in the morning turns toworking in sticky conditions after a rainshower, an adjustment in the tension may berequired to optimize performance. “When conditions change, you have to
think about doing an adjustment. It’s proba-bly a half-hour job, but the cost of not doingit over the period of operation can be quitehigh.”
Components of the undercarriage weardifferently under different conditions. In ahigh-impact environment of hard rock,grousers will wear out quicker. If lots of sand— particularly wet sand — is runningthrough the undercarriage, bushing wear isaccelerated. In working in especially pack-able soils or refuse, material can get wedgedinto undercarriage areas and cause compo-nents to engage improperly and increasewear.Nenne said the simple act of cleaning out
debris from the undercarriage at the end of awork day will help keep down operatingcosts. He adds that engineering attempts toseal off critical undercarriage componentsfrom such debris haven’t worked. “A lot ofpeople have tried to keep material awayfrom parts, but if you do too much of that, itkeeps debris in instead of keeping it out. Youcan overprotect.”
Bottom LineThe rule of thumb is that an undercarriage
will absorb half of the cost of operating atracked machine. Nenne was asked if per-haps that ratio of expense didn’t shift some-what after the Tier IV regime increased thecost of engines and emission controls.
“I would say that it hasn’t changed,” hesaid. “Tier IV is an upfront cost for a buyer,but when you look at operating costs, theundercarriage is still going to come in at 50percent.”When a contractor opts to purchase a used
dozer or other tracked machine, the condi-tion of its undercarriage becomes a criticalissue. Nenne said it is possible to correctly
determine the working condition of anundercarriage by inspecting for dry jointsand other indicators of wearing and aging.Knowing the conditions in which themachine operated — sand or rock versusloamy soil — also can signal how much lifethe undercarriage still has in it.Nenne has no predictions about a future
mechanical system that will replace the tracksystem, which dates back more than a centu-ry in its modern form. But the Cat undercar-riage specialist said the manufacturer is pro-ducing undercarriages for some foreign mar-kets that have rubber-coated and sound-deadening components, which suggests thefamiliar clanking of a passing dozer mightbecome a thing of the past. “That undercarriage is more expensive
and harder to produce, but sound reductionin some parts of the world is important tocustomers so it has become a big part of ourthinking at this time.”For contractors focused on keeping down
costs, holding down noise might be a lesserconcern.
(This story also can be found onConstruction Equipment Guide’s Website at www.constructionequipment-guide.com.) CEG
CATERPILLAR from page 48
“Checking the tracktension is the singlebiggest thing youcan do.”
Tim NenneCaterpillar
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2014 • Page 55
Thirty years after Hamm builtthe first oscillatory rollers, thisintelligent technology is now mak-ing its debut in the minus 9,000 lbs.weight class at Hamm. A total offour models with oscillation tech-nology are available, identifiableby an “O” in the name: HD 10 VO(5,500 lbs. [2,494 kg]), HD 12 VO(6,000 lbs. [2,721 kg]), HD 13 VO(8,800 lbs. [3,991 kg]) and HD 14VO (9,500 lbs. [4,309 kg]). All ofthem are equipped with one oscil-latory and one vibratory drum.
The advantage of oscillation is itachieves a rapid increase in com-paction because the oscillationdrum directs tangential thrustingforces into the material to be com-pacted while remaining constantlyin contact with the ground. Thecombination of continuously act-ing static load and changingdynamic shear forces in the materi-al brings about a faster, better andmore gentle compaction.Moreover the amplitude and inturn the compaction power adaptautomatically to the stiffness pres-ent. Hamm achieves this effectwithout electronics, but throughintelligent application of the lawsof physics.
Wide ApplicationSpectrum for Oscillatory
RollersThe new Hamm rollers with one
oscillatory and one vibratory drumincrease compaction speed andquality, according to the manufac-turer. Applications can be found inurban centers for example. Thereason: oscillation drums can com-pact dynamically even on narrowconstruction sites, because thiscompaction technology does notdisturb buildings or pipeworkbelow the road surface throughvibration.
Oscillation also optimizes com-paction at joints to existing roadsurfaces, because it does not dam-age the cold asphalt. So the com-paction on small job sites will bemore effective than before whenusing oscillatory rollers.
During the compaction of thinlayers on tack coat or spray seal,the high compaction speed makesa noticeable improvement. A fur-ther plus point in favour of oscilla-tory rollers is that they also workvery efficiently on cooled asphalt.
Last but not least, oscillatorycompaction also optimizes manylandscaping applications. Water-
bound path surfaces or asphaltcycle paths can be compacted sig-nificantly more efficiently with thenew rollers than heretofore.
HD 10C VT Combi RollerThe HD 10C VT is the smallest
combi roller in the CompactLinewith a working width of 3.5 ft.(1.06 m) and operating weight of3,500 lbs. (1,587 kg). It comeswith permanent all-wheel drive asstandard. This distinguishes itfrom all other compact rollers inthis size and gives it outstandinggradeability in all situations,according to the manufacturer.
New Options: Drivers’Cab and Chip SpreaderHamm has developed a fully-
enclosed driver’s cab for thelargest models in the compactclass, the HD 13 and HD 14. Thepanoramic cabin features full
height glazing and provides anoverview of the construction site.Hamm also has thought aboutmany other niceties and safety fea-tures: heating, radio, screenwipers, four halogen front head-lights (H9) and two rear spotlightsare some of the cab options.
With its own chip spreaders forthe CompactLine, Hamm offers acomplement to the rollers forrepair work on motorways or otherheavily used roads. The linearspreader has stepless adjustmentand is operated from the driver’sseat. Its diffusion grill produces aremarkably even distribution pat-tern. The chip spreader is availablein two spreading widths: 3.28 ft. (1m)/53 gal. (200 L) or 3.95 ft. (1.20m)/63 gal. (240 L). Mounting iseasy with a forklift truck and themounting point close to themachine frame ensures a favorableweight distribution.
Drum Lighting and HingedScraper for More Quality
and SafetyHamm has included an extreme-
ly bright drum lighting in its pro-gram for the entire CompactLine.The environment-friendly LEDlighting brings good illuminationto the working area. This is animportant quality and safety fea-ture, as the compact rollers fre-quently work at the end of theroller group in poorly illuminatedareas.
Another new option for allCompactLine models is the springloaded hinged scraper. It keeps thedrums clean while compacting andcan be hinged out of the way bymeans of a foot pedal for replace-ment or cleaning.
(This story also can be found onConstruction Equipment Guide’sWeb site at www.constructionequip-mentguide.com.)
For more information on paving, compaction and milling equipment, as well as comparison charts, visit CEG's Web site at www.constructionequipmentguide.com.
SECT IONPavingPages 56-67
Hamm Adds Four Models With Oscillation TechnologyHamm offers two dif-ferent chip spreadersfor rollers from 5,000lbs. (2,268 kg) operat-ing weight.
There are countless areas of application for Hamm’s CompactLine with oscillation, for example thecompaction of thin layers on tack coat or spray seal, asphalt compaction in confined urban areasor along joints and even compaction of water-bound path surfaces in landscape gardening.
Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • October 29, 2014 • Page 57
Page 58 • October 29, 2014 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide
Operating Max DigM
find us on
www.facebook.com/linderindustrialmachinery
FloridaFt. Myers • 239/337-1313Jacksonville • 904/786-6710
Ocala • 352/629-7585Orlando • 407/849-6560
Pembroke Pines • 954/433-2800Plant City • 813/754-2727
West Palm Beach • 561/863-0570
North CarolinaAsheville • 828/681-5172Charlotte • 704/376-7554Greenville • 252/695-6200High Point • 336/665-0110Raleigh • 919/851-2030
Wilmington • 910/254-2031
South CarolinaColumbia • 803/794-6150Greer • 864/877-8962
North Charleston • 843/552-0095
Ashland, VA • 804/798-6001Fishersville, VA • 540/337-3057Richlands, VA • 276/596-9440Salem, VA • 540/380-2011
Winchester, VA • 540/667-9777www.JamesRiverEquipment.com
Knoxville, TN • 865/577-5563LaVergne, TN • 615/213-0900
Chattanooga, TN • 423/894-1870Kingsport, TN • 423/349-6111Memphis, TN • 901/346-9800Saltillo, MS • 662/869-0283
www.PowerEquipCo.com
AlabamaBirmingham • 205/591-2131Alabaster • 205/621-2489Anniston • 256/831-2440Decatur • 256/355-0305Dothan • 334/678-1832Mobile • 251/457-8991
Montgomery • 334/288-6580Shoals Area • 256/383-5666Tuscaloosa • 205/752-0621
FloridaPanama City • 850/763-4654Pensacola • 850/505-0550
GeorgiaAtlanta • 404/366-0693Albany • 229/435-0982Augusta • 706/798-7777Calhoun • 706/879-6200Columbus • 706/562-1801Hoschton • 706/654-9850Kennesaw • 678/354-5533Macon • 478/745-6891
Savannah • 912/330-7500www.tractor-equipment.com
Bomag Multi-Purpose CompactorOffers Intelligent Machine Controls
Featuring intelligent machine controls for enhanced per-formance and optimal safety, Bomag’s BMP8500 articulat-ed multi-purpose compactor offers versatile operation forcompaction of cohesive, semi-cohesive and non-cohesivesoil types in applications such as trenches and foundations.The BMP8500 is powered by a 19.4-hp (14.4 kW), three-
cylinder, water-cooled Kubota diesel engine that featuresEcoMode, a system that automatically idles the engine toconserve fuel during inactivity. Using Bomag’s intelligentvibration control (IVC) to achieve consistent compactionresults, the compactor has a dual exciter system and twoselectable amplitudes that deliver output options of either8,000 or 16,000 lbs. of centrifugal force. Rental centers or end users can quickly adjust the com-
pactor’s working width from 24 to 33.5 in. (61 to 85 cm)with standard bolt-on drum extensions. The drum extensionsare easily aligned and installed in 10 to 20 minutes, accom-modating different trench dimensions while avoiding thehassle of replacing entire drum sets, according to the manu-facturer.Operation of the BMP8500 is simple, due to a dual func-
tion cable/radio remote control. The compactor’s hydrostat-ic drive system offers two travel speed ranges and provides
a high gradeability of 45-percent with vibration.Additionally, the all-drum drive provides enhanced traction,while a clear-sided design with no lateral overhang ensuresfull compaction against trench walls and obstacles.The BMP8500 is equipped with the Bomag operator safe-
ty system (BOSS), which increases worker safety by auto-matically stopping machine travel if the operator is in thesafety zone. An integrated diagnostic system displays faultcodes to make troubleshooting easy. Maintenance also issimplified by swing-out covers that fully open to 90 degrees,providing efficient access to the engine and internal systems.Additionally, the durable composite hoods are impact resist-ant to protect the engine and components.Other standard features include articulated steering, high-
profile drums with a 1-in. (2.5 cm) padfoot height, lockablehoods, hinged center lifting points for balanced lifts, hydro-static service brakes and a spring-applied, hydraulicallyreleased parking brake.For more information, call 309/853-3571 or visit
www.bomag.com/us.(This story also can be found on Construction Equipment
Guide’s Web site at www.constructionequipmentguide.com.)
Bomag’s BMP8500 articulated multi-purposecompactor offers versatile operation forcompaction of cohesive, semi-cohesive andnon-cohesive soil types in applications suchas trenches and foundations.
Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • October 29, 2014 • Page 59
SUSTAINABLE SOLUTIONS!
www.wirtgenamerica.comROAD AND MINERAL TECHNOLOGIES
Two in One: The WR 240i from Wirtgen makes a convincing impression when it comes to soil stabilization and cold recycling. In addition to perfect ergonomics and operation, clever automatic functions and outstanding terrain accessibility, the effi cient engine and powerful milling and mixing performance ensure optimal results. You too can benefi t from the technology leader‘s solutions.
Page 60 • October 29, 2014 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide
Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • October 29, 2014 • Page 61
FORT MYERS, FL
239-334-3627MIAMI, FL
305-592-5740ORLANDO, FL
407-299-1212WEST PALM BEACH, FL
561-848-6618
POMPANO BEACH PARTS, FL
954-977-9541SARASOTA PARTS, FL
941-752-1300NEW TAMPA, FL
813-995-0841TAMPA PARTS, FL
813-621-4902
NASHVILLE, TN
615-501-8600CHATTANOOGA, TN
423-855-0633KNOXVILLE, TN
865-546-3207
KINGSPORT, TN
423-349-5001LOUISVILLE, KY
502-253-3721www.mayequip.com
LEXINGTON, NC
866-629-3784COLUMBIA, SC
803-409-0460
Page 62 • October 29, 2014 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide
POWER EQUIPMENTCOMPANY
3300 Alcoa HighwayKnoxville, TN 37920
(865) 577-5563
1487 Rock Springs RoadKingsport, TN 37664
(423) 349-6111
4295 Bonny Oaks DriveChattanooga, TN 37406
(423) 894-1870
1290 Bridgestone PkwyLaVergne, TN 37086
(615) 213-0900
3050 Ferrell Park CoveMemphis, TN 38116-3502
(901) 346-9800
1545 Highway 45Saltillo, MS 38866
(662) 869-0283
RISH EQUIPMENTCOMPANYwww.rish.com
917 Cavalier Blvd.Chesapeake, VA 23323
(757) 485-2100Fax: (757) 485-3616
1410 West Hundred Rd.Chester, VA 23836
(804) 748-6411
133 Wise Mountain Rd.NW
Coeburn, VA 24230(276) 395-6901
Fax: (276) 395-3438
10214 Fayetteville Rd.Bealton, VA 22712
(540) 439-0668Fax: (540) 439-0719
5731 Glenmary DriveSalem, VA 24153(540) 380-2090
Fax: (540) 380-4858
66 International LaneSuite 102
Staunton, VA 24401(540) 887-8291
Fax: (540) 887-8295
REYNOLDS-WARRENCOMPANY INC1945 Forest ParkwayLake City, GA 30260
(800) 875-5659(404) 361-1593
TRACTOR & EQUIPMENT COMPANY
5336 Messer-Airport HwyBirmingham, AL(205) 591-2131
3820 Greensboro Ave.Tuscaloosa, AL(205) 752-0621
2100 East I-65 Service Rd.North
Mobile, AL(251) 457-8991
800 Church St. N.E.Decatur, AL
(256) 355-03053285 Selma HighwayMontgomery, AL (334) 288-6580
243 South Jackson St.Grove Hill, AL
(251) 275-4158961 Hwy 20 & Elledge Lane
Tuscumbia, AL(256) 383-5666
4307 Reeves StreetHighway 431 North
Dothan, AL(334) 678-1832
309 Hamric Drive WestOxford, AL
(256) 831-2440150 Piper LaneAlabaster, AL
(205) 621-24893305 Highway 77Panama City, FL(850) 763-4654
9036 Pine Forest Rd.Pensacola, FL
(850) 505-0550
Wirtgen’s Tier IV Interim W 250iWIDRIVE Matches Brain With Brawn
Wirtgen’s Tier IV interim-compliantW 250i offers high rates of productivi-ty, maximum cost efficiency and fuel-efficient i-machine technology. Thislarge cold mill can remove asphalt lay-ers with a milling depth of up to 14 in.(35.5 cm), and cut portland cementconcrete surfaces at a high advance rate.
This is possible due to its muscularpower plant, matched with WIDRIVEintelligent machine management sys-tem, three selectable milling drumspeeds, and dual engine concept, whichkeeps operating costs exceptionallylow for a cold milling machine in thisperformance class, according to themanufacturer.
The dual engines of the W 250i —also seen on the W 210i — makes vir-tually two machines in one: a high-per-formance milling machine with the fullpower of two engines totaling 990 hp,and a cost-efficient mill with a singleengine at 599 hp to economicallyremove softer asphalt surface coursesor porous asphalt, for example.
The machine operator can set theoptimum drum speed for any job fromthe operator’s platform via a selectorswitch, allowing him to adapt immedi-ately to changing conditions.
For standard milling jobs, such asthe removal of a surface course, the W250i can operate with the mediummilling drum speed of 1,800 rpm,which produces reclaimed asphaltpavement (RAP) at preferred aggregatesizes. When removing thin surfaces atthe maximum advance rate, the highmilling drum speed of 2,000 rpm maybe selected, producing a superiormilling texture. And for maximum pro-ductivity at lowest cost, the slowestspeed of 1,600 rpm is the right choicefor reduced fuel consumption and lowcutting tool wear.
The W 250i’s standard cutting widthis 7 ft. 3 in. (2.2 m), but this can beextended with additional drum units forworking widths of 8 ft. 2 in., 10 ft. 2 in.,11 ft. 6 in., 12 ft. 6 in., and 14 ft. 5 in.(2.5, 3.1, 3.5, 3.8 and 4.4 m). Theoptional FCS Light quick-change sys-tem for milling drums permits a varietyof different milling operations via dif-ferent milling drums.
At the operator’s platform, a multi-functional control display serves as apractical information hub. It can beswung to the left or right of the opera-tor, together with the level pro control
panel, and displays operating status andservice data.
The control display provides user-friendly diagnostic options with cleargraphics for identifying the source ofany problem. Another handy functionis the logging of job data at the end ofthe day, showing how many truckshave been loaded and the overall ton-nage achieved.
Wirtgen's WIDRIVE machine man-agement system handles many tasksfor the operator in automatic processchains, making it easy to learn how tooperate and control the W 250i. Anoptional camera system with two or sixcameras also is available to monitor upto six working areas on the control dis-play.
The optional parallel-to-surface(PTS) system automatically aligns theW 250i parallel to the road surface,ensuring simple, accurate operation ofthe machine in demanding profilingjobs. PTS also assists the operator inpositioning the machine in the milledcut to initiate the milling process. Inautomatic mode, the system takes careof all the steps that the operator wouldotherwise need to select manually, oneafter another.
The operator activates the level prolevel control system at the flick of aswitch, and all four crawler track unitsof the large milling machine are low-ered simultaneously at high speed.When the milling drum unit reaches thesurface to be milled, the lowering speedis reduced and the milling drum slowly
penetrates the material down to the setdepth. The automatic process helps toprevent excessive cutting tool wear oreven tool failure when milling starts.
The same applies when the W 250iis aligned transverse to the direction oftravel. In many cases, cold millingmachines need to overcome signifi-cant differences in height when beingmoved into or out of the milled cut.The integrated four-fold, full-floatingaxle balances out all four track unitsquickly and reliably to reduce themachine’s lateral inclination to a min-imum. This lends a high degree of sta-bility to the large milling machinewhile the operator moves forward nor-mally, according to the manufacturer.
The W 250i’s intelligent speed con-trol (ISC) system prevents crawlertrack slip and ensures perfect tractionof all track units to achieve maximummilling performance. This, in turn,reduces track pad wear. When negotiat-ing bends, the ISC system automatical-ly increases the speed of the outercrawler tracks depending on the steer-ing angle. As a result, even extremelynarrow bends can be milled using theall-track drive.
An optional vacuum cutting system(VCS) to reduce particulate emissionsat the cutter head is available.
For more information, call 615/501-0600 or visit www.wirtgenamerica.com.
(This story also can be found onConstruction Equipment Guide’s Website at www.constructionequipment-guide.com.)
The dual engines of the W 250i — also seen on the W 210i — makes vir-tually two machines in one: a high-performance milling machine with thefull power of two engines totaling 990 hp, and a cost-efficient mill with asingle engine at 599 hp to economically remove softer asphalt surfacecourses or porous asphalt, for example.
Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • October 29, 2014 • Page 63
VT LeeBoy, Inc. 500 Lincoln County Pkwy Ext., Lincolnton, NC 28092 Call 704.966.3300 or www.LeeBoy.com
Page 64 • October 29, 2014 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide
Serving the Asphalt Industry for 25 Years
2002 Etnyre Shooter Distributor,2000 gallons, computerized w/1 ftcut-offs, propane heat, 12 ft spraybar, 2002 IH 4700 w/T444E dieselengine, 5 spd trans, 2 spd axle, airbrakes, a/c, 33,000 GVW
866-430-7539
3517 Wayne White Rd., Climax, NC 27233
2014 Warren GS87 Tailgate Spreader tailgateSpreader, Warren GS87 & GS84 tailgate spreader,designed to mount on standard dump bodies, manualfeed-gate control, eight one-foot sections for spreadwidth adjustment, operator’s platform with safety rail.
2006 Etnyre Centennial II Distributor, EtnyreCentennial II, 2000 gallons, computerized w/1 ft cut-offs, 14 ft spray bar, propane heat, Sterling 7500 w/CatC7 diesel engine, 6 spd trans, 2 spd axle, air brakes,a/c, tires 60%, 33,000 GVW
2014 Marathon KERA10 Crack Sealer, New MarathonKERA10 walk behind crack sealer, 10 gallon materialvat, full wrap around oil jacket, manual full sweep agitation, single burner with flame out protection, oiltemperature gauge, material temperature gauge, heated3/4" discharge valve
2001 Blaw Knox PF 3200 Paver, front wheel assist,Ultimat 10-20B electric screed, Cummins diesel engine,fume extractor, plumbed for Topcon, washdown hose& reel, lights
1997 Etnyre T Tanker, 6750 gallons, NO heat, front &rear unloading, good tires
2001 Blaw Knox PF 4410 Paver, Ultimat 8-16 ft elec-tric screed, Cummins diesel engine, fume extractor,power crown & slope
2005 Ingersoll Rand DD112HF Roller, 78" doubledrum high frequency vibratory roller, ROPS canopy,water system, Cummins diesel engine, (13 1/2 tons)
2014 Marathon TPS250T Distributor, New MarathonTPS250T tack distributor, trailer mounted, Honda 5.5hpgas engine, 10GPM pumping system, 250 galloncapacity, 5 ft spray wand w/40 ft hose, 10" filler lid,hose reel, dual propane burners
Parts & Sales: [email protected]
Reynolds-Warren Equipment Companywww.reynoldswarren.com
1945 Forest ParkwayLake City, GA 30260
800/875-5659404/361-1593
Ashland, VA 23005804/798-6001
Burkeville, VA 23922434/767-5578
Chester, VA 23831804/748-9324
Fishersville, VA 22939540/337-3057
Salem, VA 24153540/380-2011
Manassas Park, VA 20111703/631-8500
South Hill, VA434/447-1325
Danville, VA 24540434/822-6110
Richmond, VA 23220840/358-6776
Winchester, VA 22602540/667-9777
Asheville, NC 28806828/667-0176
Charlotte, NC 28269704/597-0211800/532-6797
Greensboro, NC 27409336/668-2762 800/632-0376
Wilkesboro, NC 28697336/973-8201800/422-4193
Mt. Gilead, NC 27306910/439-5653800/692-9175
Asheboro, NC 27203 336/625-2212
Salisbury, NC 28144 704/636-2671
Matthews, NC 28104704/821-7399
Rock Hill, SC 29730803/325-1555866/277-8119
T
JAMES RIVER EQUIPMENT
Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • October 29, 2014 • Page 65
Buford, GA678.318.9500Forest Park, GA770.319.0074Savannah, GA912.964.8079Asheville, NC828.687.0620Charlotte, NC704.596.8283Greenville, NC252.754.5280Raleigh, NC919.661.8710Charleston, SC843.414.1120Columbia, SC803.791.0740Piedmont, SC864.704.1060Chattanooga, TN423.308.7940
Birmingham, AL205.841.6666Mobile, AL251.633.4020Montgomery, AL334.262.6642Huntsville / Decatur, AL256.350.0006Oxford, AL800.917.7931Pensacola, FL850.479.3004
Richmond, VA804.359.4048800.662.6485
Contact your local dealer:
Volvo Construction Equipment
Ask about our complete line of paving solutions by contacting a Volvo dealer near you, or visit volvoce.com/na to learn more.
YOUR EXPERTISE. OUR INNOVATION AND SUPPORT.IT’S THE RIGHT MIX.
Smart Works.
ASC Construction Equipment USA, Inc.
GEORGIABuford678-318-9500Forest Park770-319-0074Savannah912-964-8079
NORTH CAROLINAAsheville828-687-0620Charlotte704-596-8283Greenville252-754-5280Raleigh919-661-8710
SOUTH CAROLINACharleston843-414-1120Columbia803-791-0740Piedmont864-704-1060
TENNESSEEChattanooga423-308-7940
COWIN EQUIPMENT CO. INC.
Birmingham, AL205-841-6666Mobile, AL251-633-4020Montgomery, AL334-262-6642Huntsville / Decatur, AL256-350-0006Oxford, AL800-917-7931Pensacola, FL850-479-3004
RICHMOND MACHINERY & EQUIPMENT
Richmond, VA804-359-4048800-662-6485
Page 66 • October 29, 2014 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide
FLORIDA
Pensacola, FL850-505-0550
Panama City, FL850-763-4654
ALABAMA
5336 Messer Airport Hwy.Birmingham, AL 35212
205-591-2131
Fax: 205-591-8321
Grove Hill, AL251-275-4158
Tuscumbia, AL256-383-5666
Dothan, AL334-678-1832
Mobile, AL 251-457-8991
Decatur, AL256-355-0305
Alabaster, AL205-621-2489
Tuscaloosa, AL205-752-0621
Montgomery, AL334-288-6580
Oxford, AL256-831-2440
www.tractor-equipment.com
www.reynoldswarren.com1945 Forest ParkwayLake City, GA 30260
800-875-5659 • 404-361-1593
Fax: 404-361-1885
RICHMOND MACHINERY &EQUIPMENT CO., INC.
1701 Roseneath Rd.Richmond, VA 23230
1-800-662-6485
Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • October 29, 2014 • Page 67
Announcing Our New Distributor in ArizonaThe Worldwide Leader in Concrete Paving Technology
[email protected] � www.gomaco.com
CONCRETE STREETS AND HIGHWAYS � AIRPORT RUNWAYS � CURB AND GUTTER � SIDEWALKS RECREATIONAL TRAILS � SAFETY BARRIER � BRIDGE PARAPET � BRIDGE DECKS � IRRIGATION CANALS
GOMACO CORPORATION IN IDA GROVE, IOWA, USA � THE WORLDWIDE LEADER IN CONCRETE PAVING TECHNOLOGY � 712-364-3347
STOWERS MACHINERY CORPORATIONwww.gomaco.stowerscat.com
COWIN EQUIPMENT CO.
Birmingham, AL205-841-6666
205-849-0853 (Fax)
Mobile, AL251-633-4020
251-633-9157 (Fax)
Montgomery, AL334-262-6642
334-834-2272 (Fax)
Huntsville, AL256-350-0006
256-355-5250 (Fax)
Oxford, AL256-832-5053
256-831-4295 (Fax)
Pensacola, FL850-479-3004
850-474-1602 (Fax)
TRACTOR & EQUIPMENT COMPANYwww.tractor-equipment.com
Forest Park, GA404-366-0693
404-366-9688 (Fax)
Calhoun, GA706-879-6200
Hoschton, GA706-654-9850
706-654-9856 (Fax)
Columbus, GA706-562-1801
706-562-9897 (Fax)
Macon, GA478-745-6891
478-745-7291 (Fax)
Augusta, GA706-798-7777
706-798-3237 (Fax)
Albany, GA229-435-0982
229-435-5259 (Fax)
Pooler, GA912-330-7500
912-330-7490 (Fax)
Kennesaw, GA678-354-5533
678-354-5577 (Fax)
Knoxville, TN (East)865-546-1414
Knoxville, TN (West)865-218-8800
Chattanooga, TN423-698-6943
Tri-Cities, TN423-323-0400
Crossville, TN931-484-4040
Sevierville, TN865-595-3750
Page 68 • October 29, 2014 • www.constructionequipmentguide.com • Parts Section • Construction Equipment Guide
Since 1985!
CALL JENNIFER TODAY!(888) [email protected]
www.RBusedParts.com
NEW, USED & REMAN PARTS• Undercarriage
• Arms & Booms
• Cylinders
• Valves
• Transmissions
• Pumps
• Engines
• and More!
LiuGong Makes AdditionsLiuGong North America has appointed
Jake Huang as vice president of LiuGongNorth America. Huang will be responsiblefor overseeing Mexico and Central America(a territory under the LiuGong NorthAmerica umbrella) and Dressta businessdevelopment. This role was previously heldby Dai Wuping, who has accepted a new rolewithin LiuGong Overseas Division atLiuGong global headquarters in Liuzhou,China.
Huang joined LiuGong in 2002 and hasbeen working in the overseas sales and mar-keting division for 12 years. Prior to joiningthe LiuGong North America team, he heldthe positions of VP of LiuGong India and VPof LiuGong Hong Kong financing company.He will report to Marc Dowdell, president ofLiuGong North Amercia.
LiuGong North America also made thefollowing recent additions:
• Wojciech “Wojo” Gryzbala has beenappointed as Dressta parts technical support.He previously worked for LiuGong DresstaPoland where he has spent more than 10years in parts technical and logistics for theDressta product line.
• Chen “Tiny” Zhe has been appointed asLiuGong CE parts technical support. Hepreviously worked at LiuGong Global
Headquarters in Liuzhou, China.• Gina Salazar has been appointed as war-
ranty coordinator.• Shavonne Jaquess has been appointed as
senior parts customer representative.• Chanda Sexton has been appointed as
parts customer service representative.“We thank Dai Wuping for his many con-
tributions to our growth in the Mexican andCentral American markets and wish himwell in his new endeavor at our corporateheadquarters. We also look forward to thecontinued focus, support and improvementof this key strategic area with the appoint-ment of Jake Huang as VP,” said MarcDowdell, president of LiuGong NorthAmerica.
“The additions of key roles in parts tech-nical support for both Dressta and theLiuGong CE Lines, as well warranty andcustomer service, are further demonstrationof our commitment to continuous improve-ment of our product support team and spe-cialized technical focus on our core prod-ucts.”
For more information, visit www.liu-gongna.com.
(This story also can be found on
Construction Equipment Guide’s Web site at
www.constructionequipmentguide.com.)
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2014 • Page 69
FIND OUT WHAT OTHERS KNOW. VISIT TAKEUCHI-US.COM TO FIND THE DEALER NEAREST YOU.
EXPERIENCE THE DIFFERENCETakeuchi o�ers the most innovative and advanced line of compact equipment on the planet. Come and see what everyone else is talking about. Experience Takeuchi — Visit your local dealer today.
ERIEPEX
I DEH TECNE
ECNREFFE
ERIEPEXhs tre�i ohcuekaT
e amo. Ctenale phte dlaoc lrou ysitiV
I DEH TECNEdd ane avitavonnt isoe me isle enoyrevt eahe wed sn
.yado tlerae
ECNREFFEt ecapmof ce ond liecnavd
. tuobg aniklas te i eirpexE
nt onempiuqt e —hiuceka T Taenc
F
S KREHTT OAHT WUD ONIF
T ISI. VWONS K HUCEKAT
OMC.SU-I E DHD TNIO F T
.UOT YSERAER NELAEE D
Cobb CountyTractor
www.cctractor.com
Marietta, GA770.427.1348
PowerEquipmentwww.powerequipco.com
Knoxville, TN865.577.5563
Chattanooga, TN423.894.1870
Saltillo, MS662.869.0283
ACTConstructionEquipment
www.actconstruction
equipment.com
Charlotte, NC704.323.7934
Winston-Salem, NC336.397.5000
Wilmington, NC910.254.3525
H&E EquipmentServices
www.HE-Equipment.com
4425 Bluff RoadColumbia, SC 29209
803.776.8465
PerimeterTakeuchiBuford, GA
770.614.5730
Atlantic CoastalEquipiment
Sales & Rentalswww.acesalesandrentals.com
922 Longwood DriveRichmond Hill, GA
31324912.459.1155
West HillsTractor, Inc.www.westhillstractor.com
1103 West JacksonBlvd.
Jonesborough, TN37659
423.753.4621
Cowin Equipment Company, Inc.www.cowin.com
Birmingham, AL205.841.6666
Mobile, AL251.633.4020
Montgomery, AL334.262.6642
Madison, AL256.536.9390
Oxford, AL256.832.5053
Pensacola, FL850.479.3004
Atlanta, GA404.696.7210
Page 70 • October 29, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Open House Rasies Awareness for Lone Survivor Foundation
Kids of all ages enjoy big toys.
Attendees participate in the backhoe loader contest.The view from the cab of the HMEE is impressive dur-ing a ride down the highway.
(L-R): Tony Cole, Alan Loza and Julie Hughes, all of Comanco, enjoy their time at the openhouse.
Guests of the open house were treated to lunch.
JCB supports The Lone Survivor Foundation.
Alex MacKinnon (L), vice president of MacKinnon JCB, chats with BartZiegler of Southeast Well Drilling.
MACKINNON from page 20
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2014 • Page 71
CALL FOR DEMO AND PRICING
Looking for power?
Hyundai machines come standard with the industry’s best warranty. That’s the power of reliability, the key to your long-term success.
Learn more at hceamericas.com.
alabamaPittman
tractor co. inc.
Daphne,�AL
251/621-3555
arkansas
EQUiPmEnt rESoUrcE
manaGEmEnt inc.
North�Little�Rock,�AR
501/223-8604
GEOrGIa
GrovE rivEr
Richmond�Hill,�GA
912/756-7854
naSSEr HEavY EQUiPmEnt
Lawrenceville,�GA
770/995-6663
Cumming,�GA
770/889-5004
Villa�Rica,�GA
678/941-1100
mIssIssIppImiD SoUtH macHinErY
Gulfport,�MS
228/867-1555
Jackson,�MS
601/948-6740
Tupelo,�MS
662/690-6553
tEnnEssEEDiamonD EQUiPmEnt
La�Vergne, TN
615/641-1100
nOrtH�CarOlInamaY HEavY-EQUiP
5941�NC Hwy�8
Lexington,�NC�27292
866/629-3784
sOutH�CarOlInamaY HEavY-EQUiP
1330�Buckner�Road
Columbia,�SC 29203
888/865-1002
Page 72 • October 29, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
And Your Hitachi Dealers
9550 Statesville RoadCharlotte, NC 28269
704/597-0211Fax 704/596-6198
101 Bruce Rd.Asheville, NC 28806
828/667-0176Fax 828/667-4865
411 South Regional RoadGreensboro, NC 27409
336/668-2762Fax 336/668-3714288 Westgate Drive
Wilkesboro, NC 28697336/973-8201
Fax 336/973-8496305 N. Main St.
Mt. Gilead, NC 27306910/439-5653
Fax 910/439-4568
380 Anderson Road HighwayRock Hill, SC 29730
803/325-1555Fax 803/325-1506
2421 US Highway 64 EastAsheboro, NC 27203
336/625-2212Fax 336/625-0738
2725 Old Monroe RoadMatthews, NC 28104
704/821-7399Fax 704/821-4915805 Klumac Road
Salisbury, NC 28144704/636-2671
Fax 704/633-4827
11047 Leadbetter Rd.Ashland, VA 23005
804/798-6001Fax 804/752-7111
1711 E. Hundred Rd.Chester, VA 23836804/748-9324
Fax 804/530-1930Route 360 & 460
Burkeville, VA 23922434/767-5578
Fax 434/767-37743902 W. Main St.Salem, VA 24153540/380-2011
Fax 540/380-5547
98 Expo RoadFishersville, VA 22939
540/337-3057Fax 540/337-1495287 Victory Road
Winchester, VA 22602540/667-9777
Fax 540/667-94419107 Owens Drive
Manassas Park, VA 20111703/631-8500
Fax 703/631-47152055 South Boston Road
Danville, VA 24540434/822-6110
Fax 434/822-6055
Carolinas’ Division
Virginia Division
504 South Military Hwy.Virginia Beach, VA 23464
757/424-1900
333 Freedom Blvd.Yorktown, VA 23692
757/898-1900
Coastal Equipment Corpwww.coastalequipment.net
D’Iberville Experiences TremendousGrowth With Two Retail Developments The bridge crew is using a new Kobelco 8506 crawler
crane, an American 7260 crawler crane and a Link Belt 60-ton rough terrain for support work. Asphalt subcontractorWarren Paving has utilized Roadtec pavers, Ingersoll Randrollers, as well as Roadtec shuttle buggies. Warren’s fleet ofWestern Star tractors and Etnyre rear-discharge trailers issupplying all mix.Landmark Contracting Inc. has been handling the curb
and gutter work with Gomaco curb machines, and has beenworking on the barrier wall with Gomaco slip form pavers.Landmark also has been using Kobelco and Komatsu exca-vators for box culvert extensions and new box culverts. Alloff-site borrow has been hauled in by Holden earthmovers,with a fleet of more than 30 Kentworth tractors and trailerdumps with a mix of Mack triaxle dumps.“The site had about 30 acres of vegetation that had to be
cleared,” said McLaughlin. “The majority of the site had atypical interstate ROW in place, so the realestate was there to build on. South Mississippi,especially south of I-10, is very low, with poordrainage and high groundwater due to theback bays and the Gulf of Mexico. Once theclearing and stripping operations were per-formed, and the quicker you could get abovethe existing grade and establish drainage, thebetter the project progressed early on.”The main delay on the project was an
AT&T cross country fiber optic line. “The conflict was in an early phase, which
was on the critical path. This line relocate heldup an area of a new off-ramp up by nearlythree months. MDOT’s utility relocate person-nel did an outstanding job on this delay, aswell as staying ahead to intercept any otherconflicts.”Two larger grading crews and a smaller
grading crew overseeing some sections thatcould only be partially graded due to the phas-ing plan, handled the grading and excavation. “Tony Blackwell, our senior superintendent on this proj-
ect, and Bradley Thornburg, as well as Charlie Hilburn’screws, also handled the grading and excavation portions, aswell as any storm drain in their respected sections,”McLaughlin said.“The water and sewer portions were handled by Gulf
Equipment superintendents Kenny Watts and Tim Connell,who bring more than two decades of underground experi-ence to the job.” The two new lift stations were approximately 18 ft. (5.5
m) in depth. Four jack and bores under I-10 and I-110 wereinstalled, the longest one being more than 700 ft. (213 m).The deepest bore pit that had to be installed at I-110 wasbetween two big slope sections. The push pit and catch pitwere over 25 ft. (7.6 m) in depth and required sheet pilingand trench boxes, as well as steel plates to provide a safe andcompliant excavation to work from.The project, which called for 22,000 ft. (6,705.6 m) of
new interstate specifications roadway to be constructed,incorporates features that are new to the region and MDOT.“They include the first soil nail wall in Mississippi, the
first diverging diamond interchange and CD roads [collector
distributor]. The soil nail wall was constructed under anexisting I-110 overpass bridge, due to a new CD road align-ment and the proximity of the existing bridge abutment,”said McLaughlin. “Designers felt this would be the onlymethod that could be excavated and vertically secured toallow for a road to pass through this new alignment.“Schnabel Foundation Company performed the soil nail
wall construction. Landmark Contracting, our local concretesub, then installed a façade over the soil nail wall to matchthe MSE block pattern on the project. This also had a TypeIV barrier wall incorporated into the lower portion of the fin-ished wall. Steve Waller with Landmark designed a gangtype forming system to slide along on temporary gradebeams that reached over 25 feet tall to make the façade poursover the nail wall. The Diverging Diamond Interchange willbe at the new Diberville Blvd. overpass. This allows moretraffic to flow more smoothly in a high-volume setting.” McLaughlin believes the work being done will have a sig-
nificant impact on the city of D’Iberville, which is locatedimmediately north of Biloxi.“D’Iberville is experiencing tremendous growth. There
are two major retail developments already in place on eachside of SR-67, which the Sangani Interchange served. Thereare several more major retail developments in the designstage, with major tenants to be expected that the newD’Iberville Blvd. ramps will serve. I-10/110 is the majorinterchange that directs people to the casino market along thecoast of Mississippi, as well.”Major subcontractors include Webster Electric Inc.,
Atwood Fence Company, Traweek Tree and Landscape, J.L.McCool Striping, A. H. Beck Foundation Company Inc. andMcElhenney Construction Company Inc. McLaughlin alsocredits Chad Tubbs, Gulf Equipment senior estimator andproject manager, for making sure the project runs smoothly,along with MDOT project manager Eric Jackson andMDOT senior inspector Gary McCullough.The project start-ed in July 2013 and has a completion date of August 2015.
(This story also can be found on ConstructionEquipment Guide’s Web site at www.constructionequip-mentguide.com.)CEG
INTERCHANGE from page 44
Gulf Equipment Corp. photoJohn McLaughlin, Gulf Equipment Corp. general superintendent,believes the work being done will have a significant impact on theCity of D’Iberville, which is located immediately north of Biloxi.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2014 • Page 73
Flint EquipmentCompany
1206 Blaylock St. Albany, GA 31705
229/888-1212Fax: 229/435-3612
180 Princeton Blvd.Adairsville, GA 30103-2628
770-773-9857Fax: 770-773-7226
4500 Wendell Dr. SWAtlanta, GA 30336-1627
404/691-9445Fax: 404/696-1170
5333 BBS WayBraselton, GA 30517-1707
770-965-1889Fax: 770-965-1894
251 Perry Lane Road Brunswick, GA 31525
912-264-6161Fax: 912-264-5263
2400 Victory Dr.Columbus, GA 31902-3457
706/687-3344Fax: 706/682-4738
515 Chamblin Rd. Grovetown, GA 30813-3905
706/855-5440Fax: 706/855-5447
136 Acres DriveLadson, SC 29546
843/572-0400Fax: 843/572-7746
4600 Pio Nono AveMacon, GA 31206-5064
478/788-1586Fax: 478/781-8591
169 Ross Clark Circle N.E. Dothan, AL 36303
334/794-8691Fax: 334/794-8696
50 Morgan Industrial Blvd. Garden City, GA 31408
912/964-7370Fax: 912/964-1822
1220 Henderson HWY Troy, AL 36081 334/566-4181
Fax: 334/566-4361
4900 East Highway 501 Aynor, SC 29511
843/358-5688Fax: 843/358-2826
116 Corporate Drive Simpsonville, SC 29681
864/963-5835Fax: 864/963-7405
4717 Jefferies Hwy Walterboro, SC 29488
843/539-1420Fax: 843/539-1424
3464 Sunset Boulevard West Columbia, SC 29169
803/794-9340Fax: 803/794-9346
178 Seaboard RoadAndrews, SC 29510
843/221-4940Fax: 843/221-4942
1128 Hwy 70 WestGarner, NC 27529
919/772-2121Fax 919/779-5432
3604 Highway 264EGreenville, NC 27834
252/758-4403Fax 252/758-6508
3816 Martin Luther King BlvdNew Bern, NC 28562
252/638-5838Fax 252/638-2949
5039 US 301 SouthFayetteville, NC 28348
910/424-1200Fax 910/424-8763
Northside Industrial ParkWilmington, NC 28429
910/675-9211Fax 910/675-3640
Highway 42 Aulander RoadAhoskie, NC 27910
252/332-5550Fax 252/332-4186
4618 Scarborough Dr.Lutz, FL 33559813/995-0841
4333 North John YoungParkway
Orlando, FL 32804407/299-1212
3933 Martin Luther King Jr.Boulevard
West Palm Beach, FL 33404561/848-6618
4343 Northwest 77th AvenueMiami, FL 33166
305/592-5740
3005 Hanson StreetFort Myers, FL 33916
239/334-3627
EquipmentCompany
Page 74 • October 29, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2014 • Page 75
© 2014 Yanmar America Corp.
RESPECTFULLY DISREGARDS CONVENTIONAL EXCAVATOR WISDOM.Plenty of people make compact excavators. But none can say they engineered the first mini-excavator, zero tail swing excavator, swing-boom excavator and rubber-tracked excavator. At Yanmar, we simply can’t stop innovating. That’s why our nine excavators – seven with true zero tail swing – are each purpose-built to overcome the most challenging conditions, work with unparalleled power and conserve fuel. So, if you just want to play around on your jobsite, go get any old excavator. BUT IF YOU’D RATHER RULE YOUR JOBSITE, GET A YANMAR.
RuleTheJobsite.com
Corp.anmar America 2014 Y Yanmar America ©
ACT Construction EquipmentCharlotte, NC704-323-7934
Winston-Salem, NC336-397-5000
Wilmington, NC910-254-3525
www.actconstructionequipment.com
Byrd Tractor, Inc.7274 Centreville Rd.Manassas, VA 20111
703-361-2135Fax: 703-361-4804
www.byrdtractorinc.com
Carolina Equipment of WesternNorth Carolina
994 Charlotte Hwy.Fairview, NC 28730
828-628-3004wncequipment.com
Ditch Witch of North Carolina, Inc.329 US Highway 70 East
Garner, NC 27529919-772-1214
www.dwnc.com
Hawkins-Graves, Inc.13432 Wards Rd.
Lynchburg, VA 24501434-847-7703866-847-7703
www.hawkinsgraves.com
Tiger Equipment Company, Inc.2350 Lanier Rd.
Rockville, VA 23146804-749-8855
Vermeer Puerto RicoBayamon, PR787-640-6334
Vermeer of Texas-Louisiana8272 Rushing Road
Denham Springs, LA 70726225-665-7900
Fax: 225-665-7979
Vermeer Southeast Sales & Service, Inc.
www.vermeersoutheast.com
Boynton Beach, FL561-742-7400
Clearwater, FL727-299-9207
Ft. Myers, FL239-337-5900
Jacksonville, FL904-262-4400
Orlando, FL407-295-2020
Pensacola, FL850-944-8110
Marietta, GA770-973-8811
Birmingham, AL205-841-9895
Page 76 • October 29, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Deep South JCB6851 Greenwood RoadShreveport, LA 71119318-621-9000
340 Airport RoadJackson, MS 39208601-939-9655
761 Choctaw DriveBaton Rouge, LA 70805225-383-6117
4201 Michoud Blvd.New Orleans, LA 70129
504-254-2700
MacKinnon JCB2230 N US Hwy 301Tampa, FL 33619813-621-4671
1915 N Orange Blossom TrOrlando, FL 32804877-205-6098
6907 Broadway AveJacksonville, FL 32254877-218-5638
2755 Marshall DrTifton, GA 31793877-462-32505566 6th St. W.
Lehigh Acres, FL 33971239-458-5005
www.mackinnonjcb.com
JCB of South Florida(a division of Florida Coast Equipment)
9775 W Boynton Beach BlvdBoynton Beach, FL 33437
561-369-041415900 Westpark Ln
Fort Pierce, FL 34945772-461-1003
www.jcbofsouthflorida.com
Dougherty JCB446 Fairforest Way
Greenville, SC 29607864-277-9800
9040 Palmetto Commerce PkwyLadson, SC 29456843-821-8195115 Windhill Rd
Columbia, SC 29203803-754-4232
3014 Thurston AveGreensboro, NC 27406
336-275-33515605 Martin Luther King Hwy
Greenville, NC 27834252-830-5377
8205 Brownleigh DrRaleigh, NC 26717919-787-6700
www.doughertyjcb.com
Kubota Tractor Corporation is joining Alan Jackson’s 25-year career celebration. The industry-leading tractor andequipment company has signed on as a sponsor of the coun-try superstar’s upcoming 2015 tour. The multi-platinum sell-ing Grammy winner, freshoff playing the first of histwo sold-out Artist-In-Residence shows at theCountry Music Hall of Fameand Museum’s CMATheater, recently made twospecial appearances to per-form at Kubota’s dealermeeting in Nashville, Tenn.,when the company revealedthe landmark news for thefirst time to its dealers whowere in attendance from allover the United States andCanada. This is the firstmajor sponsorship of amusic superstar for KubotaTractor Corporation.“We are very excited to partner with Alan Jackson for his
25th Anniversary Tour,” said Buck Trawick, Kubota mar-keting director. “As a highly successful country superstar,
and a Kubota tractor owner, himself, we believe he is anexcellent fit for our brand.”Tour dates, cities and venues for the memorable 25-city
tour will be announced soon.Jackson’s 2015 tour is an
extension of the alreadyyear-long 25th anniversarycelebration, which kickedoff this summer with theopening of his exhibit at theCountry Music Hall of Fameand Museum, Alan Jackson:25 Years of Keepin’ ItCountry, which will runthrough March 2015. Thismonth the multi-platinumselling Grammy winner alsois playing two record-break-ing sold out shows at theCountry Music Hall ofFame’s CMA Theater mak-ing him the first simultane-ous artist-in-residence and
major museum exhibit subject.(This story also can be found on Construction Equipment
Guide’s Web site at www.constructionequipmentguide.com.)
Kubota Tractor Corporation to SponsorAlan Jackson’s Upcoming 2015 Tour
Kubota Tractor Corporation is joining Alan Jackson’s25-year career celebration.
Henry “Buddy” Sims, 91, husbandof 71 years to Marian Davis Sims, diedOct. 10. Born in Greenville County, hewas a son of the late Henry Baskell andBeatrice King Sims. He was retiredfrom Michelin, and a U.S. Army veter-an of WWII. “As all Martin & Martin customers
and friends know, Mr. Sims was anintegral part of our auction family formany years. His presence will bemissed by all. We know that all of youstand with us as we support Mrs. Sims,Debbie and the entire family throughthis somber time,” according to a state-ment prepared by Martin & Martin. In addition to his wife, he is sur-
vived by daughters, Debbie Martin ofWilliamston and Becky Sims Cassell(Mike) of Easley; son Keith Sims ofFlorida; sister, Audrey Sims Martin ofAnderson; grandchildren, Jeff Martin,Joey Martin, and Ashley SimsLeitherer; great-grandchildren,Alexandria Martin, Jayse Martin,Eliana Martin and Alexis Leitherer;and many nieces and nephews. He was
predeceased by brothers, RaymondSims and Furman Sims; and son-in-law, George Martin. In lieu of flowers,memorials may be made to AndersonCounty Meals on Wheels, 105 S. FantSt., Anderson, S.C. 29624 or Wounded
Warrior Project, P.O. Box 758517,Topeka, Kan. 66675.
(This story also can be found onConstruction Equipment Guide’sWeb site at www.constructionequip-mentguide.com.)
Martin & Martin…
Henry ‘Buddy’ Sims Passes Away at Age 91
Henry “Buddy” Sims, 91, husband of 71 years to Marian Davis Sims, diedOct. 10.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2014 • Page 77
3617
Tier 4 | ECOMAX ENGINENEW
DESIGNED WITHOUT COMPROMISE.What does JCB’s Tier 4 Solution Mean to You?
CONTACT YOUR JCB DEALER FOR MORE INFORMATION.
• No after treatment
• 10% better fuel economy
• No DPF to service
• No regeneration
• Can use regular grade oil
• No bulky add-ons
• Better torque at lower revs
• Lower service costs
JCB of Alabama8920 Weaver AveLeeds, AL 35094866-480-6125
791 Anderson RdMontgomery, AL 36110
866-954-6522
www.jcbofalabama.com
Valley JCB(a division of Valley Supply &
Equipment)
8192 Euclid CtManassis Park, VA 20111
703-330-5579
www.valleyjcb.com
JCB of Nashville181 Industrial Blvd.LaVergne, TN 37086A Division of Tuff Equipment Co.
615-851-4345
www.tuffequipco.com
JCB of Atlanta2679 Barrett Lakes Blvd.Kennesaw, GA 30144A Division of Tuff Equipment Co.
678-594-5400
www.tuffequipco.com
JCB of Georgia1008 E Hwy 80Pooler, GA 31322
888-431-0130
4008 Mike Padgett HwyAugusta, GA 30906
888-431-0130
www.jcbofgeorgia.com
JCB of Chattanooga1609 Church Rd
Chattanooga, TN 37421423-899-1219
www.jcbofchattanooga.com
Page 78 • October 29, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Cowin Equipment TeamsWith Good Hope Contracting
“They spent several days working withour customer, making sure everything wasright and ensuring a complete comfort levelfor each paver,” Rousey said. “Tim Jenkins,one of our parts and service guys, as well asbranch managers Jess McHugh and MikeLill, also have been extremely proactive inworking with Good Hope on its machinepurchases.”
Working on Corridor XThe larger I-22 road project, also known
as Corridor X, involves converting U.S.Highway 78 into an interstate highway fromMemphis southeast about 230 mi. (370 km)to Birmingham.
The stretch of road that Good Hope justcompleted near Jasper involved paving theroad in both directions, as well as paving sixramps at three different interchanges,Spanick said.
“We started this the last week of April forAlabama DOT and we are on schedule to becompleted on Sept. 8,” Spanick said in lateAugust. “We had a rather wet early summerthat put us right to the deadline on the west-bound side. We have had some better weath-er on this side [eastbound] so the paving hasgone a little bit faster over here. The projectinvolves paving three lanes about half theway, two lanes the other half, with 12-foot-
wide lanes and a 10- to 12-foot shoulder withrumble strips.”
Going the Extra MileWhenever any problems arose with the
machines on the I-22 project, Spanick saidthat Cowin was quick to offer a fix.
“Overall, the performance of the newequipment has been great,” Spanick said.“We have had a couple of small issues, butthe service has taken care of them.Whenever there has been something, Jay hasbeen prompt in getting it taken care of — allwe have had to do is give him a call. Cowingives us 24-hour, 7-day a week service.”
Liggan also was very happy with the war-ranties that Volvo offered on the pavers andexcavators Good Hope purchased, which hesaid were better than anyone else’s that helooked at.
Volvo and Cowin also made sure to liter-ally go the extra mile with Good Hope,Liggan said.
Representatives of Volvo stopped by thejob site several times to check on how wellthe machines were working for Good Hope,and Cowin, he said, also kept a continualwatch on how their equipment was perform-ing.
(This story also can be found onConstruction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)CEG
(L-R): Jay Rousey, Cowin Equipment Company sales representative, meets with hiscustomers Zac Spanick and Craig Liggan, both of Good Hope Contracting, on thejob site in Jasper, Ala.
In addition to purchasing its pavers with front wheel assist, to maximize precisionand quality, Good Hope Contracting also uses MOBA grade and slope control tech-nology and a Roadtec hopper insert.
A Roadtec SB2500D shuttle buggy is used for material remixing upon delivery.
Purchased from Cowin Equipment several years ago, this Etnyre Centennial black-topper distributor also is used on the I-22 project.
COWIN from page 12
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2014 • Page 79
© Kubota Tractor Corporation, 2014
www.kubota.com
Gear up with year-end fi nancing on SVL75 Series compact track loaders!
$0 Down, 0% Financing, for up to 60 Months*
A.P.R.
TYLER EQUIPMENT CO., INC.2613 Main St.
Conway, SC 29516843-248-5294
BALDWIN TRACTOR & EQUIPMENTwww.baldwintractor.com
22463 State Highway 59SRobertsdale, AL 36567
251-947-4171
JONESBORO TRACTOR SALES INC.5312 Stadium Blvd.
Jonesboro, AR 72402888-931-9151870-935-9151
MASON TRACTOR CO.www.masontractorco.com
1050 Appalachian HwyBlue Ridge, GA 30513
706-632-3777McDonough, GA 30253
770-957-3370
Cumming, GA 30040770-887-6119
DITCH WITCH OF TENNESSEEwww.ditchwitchtn.com
Nashville140 Charter Place
LaVergne, TN 37027615-793-7576
CREEL TRACTOR CO.www.creeltractor.com
3771 Palm Beach Blvd.Fort Myers, FL 33916
239-694-2185Fax: 239-694-6059
COASTAL EQUIPMENT SYSTEMSwww.coastalequipmentsystem.com
5287 New Kings RoadJacksonville, FL 32209
904-924-9624
BROOKS SALES INC.www.brookssales.com3144 Highway 74 East
Monroe, NC 28112704-233-4242
FUTCH’S TRACTOR DEPOTwww.futchstractordepot.com
8515 SR 207NHastings, FL 32145
904-692-3673
GROWERS EQUIPMENT CO.www.growersequipment.com
2695 Davie Rd.Davie, FL 33314954-916-1020
Miami (Doral), FL(parts only)
305-592-7891
Page 80 • October 29, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2014 • Page 81
Ashland, VA 23005804/358-6776
Burkeville, VA 23922434/767-5578Fishersville, VA540/337-3057Richland, VA276/596-9440
Asheboro, NC 27203336/625-2212Charlotte, NC704/597-0211 Greensboro, NC336/668-2762
Matthews, NC 28104704/821-7399Mt. Airy, NC336/352-2240Mt. Gilead, NC910/439-5653
Salisbury, NC 28144704/636-2671
Wilkesboro, NC 28697336/973-8201800/422-4193
Rock Hill, SC 29730803/325-1555866/277-8119
1206 Blaylock St, P.O. Box 3329Albany, GA 31706229/888-1212
Fax: 229/435-3612Cuthbert GA229/732-2631Dothan, AL334/794-8691Troy, AL
334/566-4181West Columbia, SC 29169
803/794-9340Aynor, SC 29511843/358-5688
Atlanta, GA 30336404/691-9445
Braselton, GA 30517770/965-1889
Adairsville, GA 30103770/773-9857Savannah, GA912/964-7370Brunswick, GA912/264-6161Ladson, SC843/572-0400Walterboro, SC843/539-1420
R.W. MOORE
EQUIPMENT CO.www.rwmoore.comGarner, NC919/772-2121Greenville, NC252/758-4403New Bern, NC252/638-5838Fayetteville, NC910/424-1200Wilmington, NC910/675-9211Ahoskie, NC252/332-5550
COASTAL
EQUIPMENT CORP.www.coastalequipment.net504 South Military HwyVirginia Beach, VA 23464
757/424-1900Yorktown, VA 23692757/898-1900
FLINT EQUIPMENT COMPANYJAMES RIVER EQUIPMENT
Page 82 • October 29, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Family-Owned Quarry Continues Successful Story in N.C.Telsmith horizontal screens and a 52 x 52 in.(132.1 x 132.1 cm) Telsmith horizontal impactcrusher. The company also builds some convey-ors and equipment.“We are one of very few family owned quar-
ries left,” Crossingham said. “Most of them havebeen gobbled up by the big players, and we areone of the few left. We were one of the very fewsingle quarry operations, and this is a whole dif-ferent era for us, being a regional player insteadof just a one-quarry operation. We’re a familyowned company that obviously aims to serve thecustomer. I think we can be very competitivehere, and I’m looking forward to it.”Ararat Rock Products locations include:Mt. Airy Quarry525 Quarry RoadMt. Airy, N.C.336/786-2680Eden Quarry11661 N.C. Hwy. 770Eden, N.C. 434/685-7021For more information, call 336/648-0515. (This story also can be found on Construction
Equipment Guide’s Web site at www.construc-tionequipmentguide.com.)CEG The operator of this Cat 988H loader takes the argillite rock to the crusher.
ARARAT from page 8
PIRTEK System to Restrain Hoses From ‘Whipping Effect’ Safety is always the primary concern when operating
hydraulic equipment and machinery. If an end fittingbecomes disconnected from a high-pressure hose, the releaseof energy contained inside can cause serious injury to any-one operating or working onthe equipment.The Whip Check System
offered by PIRTEK is aretention system designed torestrain the hose from the“whipping effect” created bythe release of energy. Thesystem utilizes a safety cableand clamp assembly tosecure the hose to the equip-ment using high tensilescrews. The hose clamp isselected based on the outsidediameter of the hose and thesafety cable is selected basedon the type of hose connec-tion. There are two differentways secure the cables to theequipment. The first is a bolt,which is fitted to a Code 61or a Code 62 flange. The sec-ond is to attach the cableusing steel eyelet/mountingbracket and a high tensilesteel bolt to secure it directly
to the equipmentUsing the Whip Check System greatly reduces the risk of
injury to machine operators working in a close proximity tohigh-pressure hoses and damage to other equipment nearby.
For more information, visit www.pirtekusa.com.(This story also can be found on Construction
Equipment Guide’s Web site at www.constructionequip-mentguide.com.)
The Whip Check System offered by PIRTEK is a retention system designed to restrain the hose from the “whipping effect” created by therelease of energy.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2014 • Page 83
We’ve got you covered
Scan for Free Demo
jobsite tough
ALL STAR EQUIPMENT RENTALS & SALES, INC.11680-B Metro Parkway • Fort Myers, FL 33966
888-459-7147www.allstareq.com
CAPITAL RENTALSWACKER NEUSON SALES
(toll free) 855-922-5376Manassass, VA703-368-6220Sterling, VA
703-444-0040Triangle, VA
703-221-4000
GOODLETT EQUIPMENT, INC.1825 Airport Blvd. • Cayce, SC 29033
803-794-3632www.goodlettequipment.com
JWH EQUIPMENT1101 Hwy. 80 West • Jackson, MS 39204
601-974-8090www.jwhequipment.com
RENTALEX OF PASCO, INC.11031 State Road 52 • Hudson, FL 34669
727-819-0606www.rentalex.com/hudson.php
RENTALEX OF TAMPA1022 Skipper Road • Tampa, FL 33613
813-971-9990www.rentalex.com
WALKER MILLER EQUIPMENT4400 N. Orange Blossom Trail • Orlando, FL 32804
407-299-2620www.walkermiller.com
B&M EQUIPMENT2208 NW 71st Place • Gainesville, FL 32653
352-336-9800 • Fax: 352-336-69727722 SE 126th Place • Belleview, FL 34420
352-245-9800 • Fax: 352-245-4950324 Dennard Avenue • Jacksonville, FL 32254
904-378-0889 • Fax: 904-378-0886www.bmequipment.com
AGF MACHINERY1760 Reeves Street • Dothan, AL 36303
334-699-5100www.agfmachinery.com
ACTION RENT ALL13 Center Rd. • Cartersville, GA 30120770-382-7368 • Fax: 770-382-7433
95 Three Rivers Drive • Rome, GA 30161706-291-0222 • Fax: 706-291-1062
www.actionrentall.com
Page 84 • October 29, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Allis-Chalmers Forest Green HD21 Dozer/Ripper, 1:50 Scale....$85
Allis-Chalmers Orange HD21 Dozer/Ripper, 1:50 Scale ..............$85
Allis-Chalmers Yellow HD21 Dozer w/Ripper, 1:50 Scale .......... $85
Bobcat E35 Compact Excavator, 1:25 Scale ................................$50
Bobcat E55 Compact Excavator, 1:25 Scale ................................$60
Bobcat M400 Gold Skid Steer Loader, Scale 1:25 ......................$25
Bobcat S175 Skid Steer Loader, 1:25 Scale ..................................$65
Bobcat S510 Skid Steer Loader, 1:25 Scale ..................................$65
Bobcat S530 Skid Steer Loader, 1:25 Scale ..................................$65
Bobcat S550 Skid Steer Loader, 1:25 Scale ..................................$65
Bobcat S570 Skid Steer Loader, 1:25 Scale ..................................$65
Bobcat T550 Track Loader, 1:25 Scale............................................$70
Bobcat T770 Compact Track Loader, 1:25 Scale..........................$45
Bobcat 225 Compact Excavator, 1:25 Scale..................................$50
Case CX250C Excavator, 1:50 Scale ............................................$195
Case 95XT Skid Steer Loader (Conrad), 1:32 Scale ....................$60
Case 580 ST Backhoe/Loader, 1:50 Scale ....................................$95
Case 1102 Vibromax Roller, 1:35 Scale ........................................$100
Caterpillar CT660 Day Cab Tractor w/Trail King Lowboy Trailer,
1:50 Scale ..........................................................................................$100
Caterpillar 775G Off-Highway Truck, 1:50 Scale ........................$110
Caterpillar D5K2 LGP Track-Type Tractor, 1:50 Scale..................$65
Caterpillar D6K Track-Type Tractor, 1:50 Scale ............................$65
Caterpillar D7E Track-Type Tractor, 1:50 Scale ............................$90
Caterpillar D8L Track-Type Tractor (NZG 233), 1:50 Scale..........$75
Caterpillar D8T Track-Type Tractor, 1:50 Scale............................$110
Caterpillar D9N Track-Type Tractor (NZG 298), 1:50 Scale ........$75
Caterpillar D10N Track-Type Tractor, 1:50 Scale ..........................$50
Caterpillar D10 Track-Type Tractor (Conrad), 1:50 Scale ..........$185
Caterpillar D10T Track-Type Tractor, 1:50 Scale ........................$100
Caterpillar D11R Track-Type Tractor, 1:50 Scale ........................$100
Caterpillar MH3049 Material Handler w/magnet, 1:50 Scale ....$150
Caterpillar 323D L Excavator, 1:50 Scale........................................$90
Caterpillar 336D L Excavator, 1:50 Scale........................................$95
Caterpillar D350D Articulated Dump Truck, 1:50 Scale ..............$50
Caterpillar 365B L Series II Excavator, 1:50 Scale........................$75
Caterpillar 416B Backhoe/Loader (NZG 285), 1:50 Scale............$70
Caterpillar 428 Backhoe/Loader (NZG 2851), 1:50 Scale ............$70
Caterpillar 740B EJ Articulated Dump Truck w/ Ejector Body, 1:50
Scale......................................................................................................$70
Caterpillar 963D Track Loader, 1:50 Scale ....................................$60
Caterpillar 966K Wheel Loader, 1:50 Scale....................................$95
Caterpillar 977 Traxcavator, 1:50 Scale ..........................................$60
Caterpillar 988K w/ Grapple, 1:50 Scale ......................................$160
Demag Tracked Paver (NZG), 1:50 Scale ......................................$75
Doosan Moxy MT31 Articulated Truck ........................................$100
Dynapac SD2500 CS Road Paver, 1:50 Scale ............................$150
Grove TM1500 White 12 Axle Truck Crane, 1:50 Scale ............$160
Hamm 3307 Compact Roller, 1:34 Scale ........................................$45
Hamm 3414 Pad Foot Compactor, 1:50 Scale ..............................$90
International 175 Crawler Loader, 4in1, 1:50 Scale ......................$65
International 433 Dual Engine Pay Scraper, 1:25 Scale ............$225
International 560 Pay Loader, 1:25 Scale ....................................$145
International TD-15 Dozer w/Umbrella, 1:50 Scale ......................$60
International TD-20E Dozer, 1:64 Scale ..........................................$24
International TD-25 Dozer w/Ripper, 1:25 Scale..........................$180
JCB 3CX Backhoe/Loader, 1:50 Scale............................................$75
John Deere “BO” Lindeman Crawler Tractor, 1:16 Scale ..........$70
John Deere 200C LC Excavator, 1:50 Scale ..................................$45
John Deere 315SJ Backhoe/Loader, 1:50 Scale ..........................$45
John Deere 624J Military Wheel Loader, 1:50 Scale....................$40
John Deere 772CH Motor Grader, 1:50 Scale................................$45
John Deere 959K Track Feller Buncher, 1:50 Scale ....................$90
Komatsu CK25 Compact Track Loader, 1:50 Scale ....................$45
Komatsu D51 EX Dozer, 1:50 Scale ................................................$85
Komatsu D65 EX-17 Dozer w/Ripper 1:50 Scale ..........................$80
Komatsu D65PX-17 Dozer, 1:50 Scale ............................................$80
Komatsu D155AX Dozer w/ripper, 1:50 Scale ..............................$95
Komatsu D375A Dozer, 1:50 Scale................................................$125
Komatsu D475A Dozer w/ripper, 1:50 Scale................................$160
Komatsu GD655 Motor Grader, 1:50 Scale....................................$90
Komatsu HD605 Off-Highway Truck, 1:50 Scale ..........................$80
Komatsu HM250 Articulated Dump Truck, 1:50 Scale ................$75
Komatsu HM400-3 Articulated Truck, 1:50 Scale ......................$100
Komatsu PC200 Excavator, 1:50 Scale ..........................$160
Komatsu PC490LC-10 Excavator, 1:50 Scale ................ $175
Komatsu WA470-7 Wheel Loader, 1:50 Scale ..............................$75
Komatsu WA500 Wheel Loader, 1:50 Scale ..................................$80
Komatsu WB146 Backhoe/Loader, 1:50 Scale..............................$75
Komatsu WH613 Telehandler, 1:50 Scale ......................................$65
Komatsu Mack Granite MP w/Lowboy Trailer, 1:50 Scale ..........$90
Leeboy 785 Motor Grader, 1:64 Scale ............................................$90
Leeboy 8816 Asphalt Paver, 1:50 Scale..........................................$90
Liebherr R916 Litronic Excavator, 1:50 Scale ............................$150
Link Belt 800 X2 Excavator, 1:50 Scale ........................................$200
Poclain TC45 Excavator, 1:50 Scale..............................................$140
Vogele 1900-2 Tracked Paver, 1:50 Scale........................$140
Vogele MT3000 Powerfeeder, 1:50 Scale ....................................$140
Vogele Vision 5200-2 Tracked Paver, 1:50 Scale ........................$115
Volvo EC220D Excavator, 1:50 Scale............................................$115
Volvo L220G Wheel Loader, 1:50 Scale........................................$120
Volvo 6870 Wheeled Asphalt Paver, 1:50 Scale............................$90
Wirtgen 100F Tracked Cold Milling Machine, 1:50 Scale ..........$145
Shipping and Handling Included
Contact – Barry McKeon800-523-2200 Ext. 197 • 610-506-5961 Cell
Email – [email protected]
CEG Scale Models470 Maryland Drive
Fort Washington, PA 19034Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.
Toys For Boys(and also men)Realistic Scale Models of Construction Equipment, ideal gifts for the Holidays, Birthdays, Graduation, etc.
Caterpillar D7E Track-Type Tractor, 1:50 Scale - $90 International TD-14 Crawler Dozer, 1:16 Scale - $150
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2014 • Page 85
FloridaPowerscreen of Florida5125 Frontage Rd.N. Lakeland, FL 33810Tel: 863-687-7153Fax: 863-680-1289Web: www.powerscreenfla.com
Alabama & MississippiPowerscreen Crushing & Screening11901 Westport Rd.Louisville, KY 40245Tel: 800-227-0534
184 Commercial Ct.Alabaster, AL 35007Tel: 205-966-9775Web: www.powerscreensales.com
GeorgiaPowerscreen of Georgia3402 Grant Rd.Conley, GA 30288Tel: 404-577-1483
Page 86 • October 29, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Here's how the BARGAIN ADS Work:• Supply us with a photo of a machine
(one machine per Bargain Ad) and a maximum 20 word description, plus contact and phone number.
• Either email your copy & photo to:[email protected],
or mail to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034.
• Cost is $95 per ad, $50 additional for color.
• Your ad will run for two consecutive issues in 1 region.
Your Ad Will Be Seen By Over 24,273 ConstructionEquipment Buyers in the Southeast States.
For more information, call Construction Equipment Guide today at
800/523-2200
2007 Sennebogen 880R-HDwith approx. 5800hrs. For Sale or RentCall Turner Fabian (843) 991-9220 22 RM
“TRACKS FOR YOUR MACHINE!!” $7,000,000 Inventory of High-QualitySUMMIT Rubber Tracks to fit over 3500 models of construction equip. PNEUMATIC AND FLATPROOF SKIDSTEER TIRES also available. $95 Next day shipping to 23 states .............................................................Call
Summit Supply LLC888-888-1248 • [email protected] 21-22 TM
The Easy Way To Advertise YourEquipment Valued At Less Than $1 MillionRun In Two Consecutive Issues For $95
2010 MK1 Broce Broom, 576 Hours, Located in Savannah......................................................................................$75,000
Call ASC (704) 494-8104 22 RM
MCLAREN RUBBER TRACKS FOR MINI EXCAVATORS &TRACK LOADERS, The most trusted brand in Americabrings you quality tracks for your specific make andmodel.
Call McLaren 888-492-4230 22-23 DH
MCLAREN FOR SKID STEER TRACKS, Full flotation; trac-tion; tire protection; machine stability; self-cleaning; lessground damage; fully rebuildable; interchangeable shoetypes.
Call McLaren 888-492-4230 22-23 DH
MCLAREN SOLID CUSHION TIRES, for skid steers, back-hoes, telehandlers, wheel loaders - Nu-Air Semi-Pneumatic Tire Technology: no flats ever; soft, air-cush-ioned ride; last 3 to 5 times longer than regular pneumat-ic tires; rims included; same day shipping; various tiresizes available.
Call McLaren 888-492-4230 22-23 DH
2008 70 Ton Liddell Drop Side Deck Lowboy Tri-AxleTrailer, Tandem Two-Axle Jeep, Two-axle Nitro Stinger withMotor ......................................................................$210,000
Sun Piledriving Equipment 302-539-7187 21-22 BB
Classified Rates:30 Words or Less for $30.00. Each Additional Word is 95¢.For just an additional $20 your ad can be posted on
our online searchable database for 30 daysAd runs for 2 (two) insertions - no changes in second insertion.
PLEASE ENCLOSE PAYMENT WITH ORDER and mail to:470 Maryland Drive• Fort Washington, PA 19034
215/885-2900 • Fax 215/885-2910 • Toll Free 1-800/523-2200CLASSIFIEDSAIR COMPRESSORS
Compressors
Airman PDS185, CFM Compressor,Quiet, Efficient, Durable, good condition,1950 hours..................................$10,500.
480-695-0672
ASPHALT EQUIPMENT
Asphalt Cutters
Attachments InternationalASPHALT CUTTERSSEVERE SERVICE
HIGH SPEEDASPHALT CUTTER
Skid Steers, TLB, Loaders,
Excavators
14 Models Available
''24-48 hour shipping''
SPECIAL PRICING!
Call 218-863-6444www.attachmentsintl.comwww.attachmentsusa.com
Asphalt - Misc.
2007 Dynapac PL2000, 80 in., front load-ing planer, good condition, 3,000 hrs$139,500.
847-437-8686
COMPACTION EQUIPMENT
Compaction - Misc.
2007 JCB Vibromax VM115D, 80'',25,000 lb. w/ pad foot & dozer blade, verygood condition, 350 hours ..........$77,900.
2007 Dynapac CA134, 54'', 12,200 lb.single drum roller, excellent condition, 300hours ..........................................$43,500.
847-437-8686
CRAWLER TRACTORS
Crawler Tractors
2003 CAT D6R XL, Sweeps, 24'' Tracks,Cab, Good condition, 14,500 hours................................................................CALL.
913-787-2371
EXCAVATORS
Hydraulic Excavators
2008 JCB JZ140, zero tail swing excava-tor, includes bucket, good condition, 2,500hours ..........................................$73,500.
2007 JCB JS260, 60,000 lb. excavatorincludes bucket and quick coupler, goodcondition, 1,375 hours ..............$139,900.
2005 JCB JS220, 50,000 lb. excavatorincludes bucket, quick coupler and thumb,good condition, 2,600 hrs ..........$88,900.
847-437-8686
2007 Doosan DX420, S/N 5119,Excavator with shear hydraulics, Goodcondition, 5,943 hours ..............$120,000.
440-439-4000
2003 Komatsu Excavator PC200LC-7,A/C, 9'7'' Arm, Aux. Hyd., Good condition,6150 hours..................................$79,500.
913-915-1607
Mini Excavators
2006 JCB 8080, 18,000 lb. mini excavatorw/ dozer blade, includes bucket, goodcondition, 2,300 hours ................$43,900.
847-437-8686
GENERATORS & GEN SETS
Generators & Gen Sets
MMD AMSDG-25S, 20KW Generator,Towable 3 phase Diesel 25KW, good con-dition, 4,000 hours ........................$9,750.
480-695-0672
LOADERS
Backhoe Loaders
2006 Allmand TLB 6235, 4WD, 33 HP,good condition, 1220 hours ........$19,995.
480-695-0672
2012 New Holland B95C, Cab, 4WD,Extendahoe, Pilot Controls, Excellent con-dition, 87 hours ..........................$70,500.
423-753-4621
2008 JCB 3CX-15, 15 ft. backhoe w/extendable dipper, backhoe bucket includ-ed, very good condition, 1,700 hours ..........................................................$55,000.
847-437-8686
Skid Steer Loaders
2011 Terex TSV70 with cold weather cab,bucket, forks and grapple bucket for addi-tional cost. Good condition, 195 hours ........................................................$46,000.
440-439-4000
2012 JCB 260, Canopy, Open ROPS, 3-way Servo Controls, Tier 3 Engine, Aux.Hydraulics (24gpm), Foot throttle,mechanical coupler, 2-speed trans., pic-tures available, 200 hrs ..............$36,000.
908-625-0697
2012 JCB 260, Cab, heat, 2-speed, footthrottle, general purpose bucket, verygood condition, 200 hours ..........$33,000.
847-437-8686
Wheel Loaders
CAT IT938 Wheel Loader, S/N IBS00524,
Fair condition, 18,240 hours ......$50,000.
440-439-4000
2008 JCB 426HT, 2.5 yd. wheel loader,
2.5 yd. bucket, good condition, 1,000
hours ........................................$115,000.
847-437-8686
MATERIAL HANDLERS
Material Handlers
1999 Liebherr A932HD, S/N 5316,
Material-Scrap Handler, Good condition,
17,968 hrs ................................$125,000.
440-439-4000
MISCELLANEOUS
Miscellaneous
Surplus Parts for Sale
Various Screener Parts & Mesh.
Conveyor Parts and Drives. Diesel/Hyd
Powerpack.
Call 843-525-6140
or visit
www.SandScience.com
Used Kolberg Sand Screw Available54" & 44" Single Screw
Classifier/Material WasherCall 843-525-6140
or visitwww.SandScience.com
RECYCLING EQUIPMENT
Screening Equipment
2000 Metso ST170 Portable Screener.Heavy Duty Scalping Screen withonboard stacking conveyor. Track
Mounted Chassis - Diesel/Hyd - RunsStrong.
Call 843-525-6140or visit
www.SandScience.com
TRAILERS
Dump Trailers
Felling 6x12 Dump Trailer, 6000 lb.capacity, 5hp Honda engine, good condi-tion ................................................$6,500.
480-695-0672
Trailers - Misc.
Wylie Express 500 Water Trailer, 500gallon, 4hp Honda engine, tandem surgebrakes, good condition ................$5,700.
480-695-0672
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2014 • Page 87
LOOKING TO BUY USED CATERPILLARWHEEL LOADERS 920, 926, 930, 936,938F/G, 950B/C/E/F, 966C/D/E/F/H,980C/F AND 988B. PLEASE SEND MEPICTURES, SERIAL NUMBER, CONDITION, LOCATION AND FINALOFFER PRICE.CONTACT: AIMN BLBOLPHONE: +971504814823FAX: +97165355291EMAIL:[email protected]––––––––––––––––––––––––––––––––PM WB60 + IMT 24562 | UNMOUNTEDKNUCKLE CRANECONTACT: MOHSENPHONE: 966566972242EMAIL: [email protected]––––––––––––––––––––––––––––––––CAT 966,D,E,F; 970F; 972F,G; 980C,F;D8R; D9L, D9N; D9R; 14G,H | CATLOADER: 930; 936E; 950C,B,E;966C,D,E,F; 970F; 972F,G; 980C,F | CAT DOZER: D8R; D9L; D9N; D9R |GRADER: 14G,H.CONTACT: MOSTAFA ELEMAMPHONE: 281-581-2111FAX: 281-581-2117EMAIL:[email protected]––––––––––––––––––––––––––––––––BACK HOLDCONTACT: CARL CUMMINGSPHONE: 912 384-7120EMAIL: [email protected]––––––––––––––––––––––––––––––––TAILGATE FOR A TA30 GEN 7 HAULTRUCK | TAILGATECONTACT: CAREN BUNCEPHONE: 860-824-5536FAX: 860-824-4139EMAIL:[email protected]––––––––––––––––––––––––––––––––CAT WHEEL LOADERS CAT 950B, CAT950E. MACHINES MUST BE LOCATED INUS/AUSTRALIA OR CANADA.CONTACT: IKRAM ULLAH KHANPHONE: +92-333-5555-360EMAIL: [email protected]––––––––––––––––––––––––––––––––DRESSER BUCKET, QUICK COUPLER,ATTACHMENTS FOR IH 530CONTACT: HARRYPHONE: 905 403 0788EMAIL: [email protected]––––––––––––––––––––––––––––––––SCHWING BOOM PUMPS | SCHWINGCONCRETE PUMP BOOMS 32M -39MMOUNTED ON MACK TRUCKS 94 &NEWERCONTACT: WILLIAM CROSSPHONE: 407 595 8221FAX: 407 843 0136EMAIL:[email protected]––––––––––––––––––––––––––––––––USED CATERPILLAR WHEEL EXCAVA-TOR - CAT 140M CAT M316D 329DLBETWEEN 2012 TO 2014 I CAN GIVETHE MOST MONEY USD $250,000CONTACT: IBRAHIMEMAIL: [email protected]––––––––––––––––––––––––––––––––LANDFILL COMPACTORSCONTACT: MARK OR JOHNPHONE: 519-686-1123EMAIL:[email protected]––––––––––––––––––––––––––––––––
EAGLE 1000CC OR 1200CC PORTABLECRUSHING PLANTCONTACT: JOEPHONE: 724 944-5569EMAIL: [email protected]––––––––––––––––––––––––––––––––USED GRADALL 4100 OR EQUIVALENT2005 OR NEWER - CALL FOR SPECSCONTACT: BRANCH COUNTY ROADCOMMISSIONPHONE: 517-278-2022FAX: 517-278-6126EMAIL: [email protected]––––––––––––––––––––––––––––––––I NEED TO BUY CUMMINS KT19GENSET.CONTACT: IKRAM KHANPHONE: +92-333-555-5360EMAIL: [email protected]––––––––––––––––––––––––––––––––LOOKING FOR WELDING TRUCKCONTACT: JOSEPHONE: 347 3516853EMAIL:[email protected]––––––––––––––––––––––––––––––––USED KUBOTA 92SV SKID STEER INGOOD SHAPECONTACT: GLENN, SIEVE CONSTRUC-TIONPHONE: 507-227-3780FAX: 507-736-2199EMAIL:[email protected]––––––––––––––––––––––––––––––––LOOKING TO BUY CATERPILLARWHEEL LOADER 930 BETWEEN 1980TO 1984CONTACT: MOHAMEDPHONE: 253-232-6772EMAIL: [email protected]––––––––––––––––––––––––––––––––WE BUY EQUIPMENT MANUALS | WEARE LOOKING TO PURCHASE NEW ORUSED SERVICE, SHOP, PARTS, OPERA-TOR’S OR OTHER MANUALS FOREQUIPMENT OF ALL SORTS, NOTINCLUDING TRUCKS AND VEHICLES.WE PREFER IN BULK, PERHAPS YOUHAVE COMPUTERIZED YOUR SERVICEOR PARTS OPERATION AND YOU HAVEBOOKS OR MANUALS YOU NOLONGER NEED, OR INVENTORIES YOUHAVE NOT SOLD. PERHAPS AS A DIS-CONTINUED PRODUCT LINE. WE WILLPURCHASE IN ANY USEABLE CONDI-TION IN ANY AMOUNT YOU HAVE. CALL OR EMAIL.CONTACT: GRACE FRANCESPHONE: 2708492270EMAIL: [email protected]––––––––––––––––––––––––––––––––PILE HAMMERS | LOOKING TO BUYCLAMSHELL BUCKETS, GRAPPLES,PILE HAMMERS, WINCHES, HOISTS,CRANES & HOOK BLOCKS.CONTACT: GREGPHONE: 724-228-5560EMAIL: [email protected]––––––––––––––––––––––––––––––––TERRAMITE T5C USED 1990 THRU 2000,PLEASE CONTACT E MAIL ONLYCONTACT: C.B. BARKERPHONE: 910 564 4931FAX: NONEEMAIL: [email protected]––––––––––––––––––––––––––––––––
PILE HAMMERS | LOOKING FOR USEDVIBRATORY AND DIESEL HAMMERSAPE _ ICE _ J&MCONTACT: WILLIEEMAIL: [email protected]––––––––––––––––––––––––––––––––IT DD70, IR DD25, AND DEERE 410 2004AND UP | IR DD70, IR DD25, AND DEERE410 2004 AND UP BOBCAT S185 2010BOBCAT 325 BOBCAT 323 KOMATSUDOZERS PLEASE EMAIL ME ALL INFOCONTACT: MANSOOR MOLAIPHONE: +16303799175EMAIL:[email protected]––––––––––––––––––––––––––––––––WE WANT TO BUY CATERPILLAR DOZERS D9N & D9R WITHRIPPERS.PLEASE OFFER US & KINDLYSEND US DETAILS, PICTURES & OFFERGOOD PRICE.CONTACT: FAIZ KHANPHONE: +92-333-3298751EMAIL:[email protected]––––––––––––––––––––––––––––––––WE WANT TO BUY CATERPILLARWHEEL LOADERS 950B, 950E, 966E,966F.PLEASE OFFER US & KINDLYSEND ME DETAILS, PICTURES & OFFERGOOD PRICE.CONTACT: NAQIB KHANPHONE: +92-333-3298751EMAIL: [email protected]––––––––––––––––––––––––––––––––DROP DECK TRAILER | 53X102 DROPDECK AIR RIDE TRAILERCONTACT: JOHN MICHALKOPHONE: 262 889 1372EMAIL: [email protected]––––––––––––––––––––––––––––––––TRACTOR CAB | ENCLOSED USED CABTO FIT IHC 684.CONTACT: RONPHONE: 419-565-5429EMAIL: [email protected]––––––––––––––––––––––––––––––––VANAIR 80 VIPER | PORTABLE AIR 80CFMCONTACT: ANDYPHONE: 2316725139EMAIL: [email protected]––––––––––––––––––––––––––––––––COMMERCIAL LAWN MOWER | UNDER200 HOURS AND A 52 IN SIZE DECKNEEDS TO BE A 2012 OR 2013CONTACT: [email protected]: 6315862225EMAIL: [email protected]––––––––––––––––––––––––––––––––TRACHOEEMAIL: [email protected]––––––––––––––––––––––––––––––––INTERNATIONAL TRI AXLE DUMPPAYSTAR 5000 5600 OR 5900 FROMCONTRACTOR 400 HP OR MORE | TRIAXLE DUMP CLEAN 400 HP OR MOREFROM CONTRACTOR.CONTACT: KEVINPHONE: 856-692-0027EMAIL: [email protected]––––––––––––––––––––––––––––––––HYUNDAI 4503 | LINDI FINAL DRIVECONTACT: WILLIAM RENAUD JRPHONE: 207-384-5111FAX: 207-384-4809EMAIL:[email protected]––––––––––––––––––––––––––––––––
WE WANT TO BUY CAT WHEELLOADER 920, 926E, 936E, 950B, 950E,966D, 966E, 966F, 970F, 980C, 980F, 988BAND 988F. IF YOU HAVE ANY FOR SALEPLEASE EMAIL US PHOTOS ANDDETAILS.CONTACT: RIZ SUNESARAPHONE: 832-528-0786FAX: 281-727-0415EMAIL:[email protected]––––––––––––––––––––––––––––––––WE ARE LOOKING TO BUY CAT MOTORGRADER 12G, 140G, 14G, AND 140H IFYOU HAVE ANY FOR SALE PLEASEEMAIL PHOTOS AND DETAILS.CONTACT: STEVEPHONE: 713-659-0593FAX: 281-727-0415EMAIL:[email protected]––––––––––––––––––––––––––––––––FIELD STRIPING MACHINE | LOOKINGFOR A AIRLESS FIELD STRIPINGMACHINECONTACT: RICKPHONE: 518 369 3296FAX: 518 371 0296EMAIL: [email protected]––––––––––––––––––––––––––––––––WANT TO BUY NICE CRAWLERLOADER. LOCATED IN WEST POINT CONTACT: CHARLES TRAMMELLPHONE: 706 645 6704 OR 706 501 9457EMAIL:[email protected]––––––––––––––––––––––––––––––––MINI EXCAVATOR 12000-18000# | I NEED TO PURCHASE A MINI EXCAVA-TOR FOR MY GROWING BUSINESS.CONTACT: ADAMPHONE: 518-496-5020EMAIL: [email protected]––––––––––––––––––––––––––––––––OLDER CAT 320 OR CAT 215, CAT 225 |SEEKING AN OLDER MODEL CAT 320 INTHE MID 1990 RANGE OR CAT 215/CAT225 OLD BUT IN OPERATING CONDI-TION. ONLY SEEKING ONE UNIT. CON-TACT ME VIA EMAIL ONLY WITH PHO-TOGRAPHS AND CONDITION INFORMA-TION.CONTACT: JEFF LAWSONEMAIL: [email protected]––––––––––––––––––––––––––––––––USED TIGER MOWEREMAIL: [email protected]––––––––––––––––––––––––––––––––AMCO VEBA 105 3S 5TON | NEW ORLIKE NEW CONDITION. TO BE MOUNTED ON A WORKBOAT.CONTACT: ROGER APPLEWHITEPHONE: 228-217-4135EMAIL: [email protected]––––––––––––––––––––––––––––––––LOADER FOR MASSEY 390 4WD | SEC-OND HAND LOADER TO FIT MASSEY390 4WDCONTACT: RICHARD FITZGERALDPHONE: 00353860437770EMAIL:[email protected]––––––––––––––––––––––––––––––––CAT D6R AND D7R 9903 | WE ARELOOKING FOR D6R AND D7R 1999-2002.RUNNING CONDITION WITH PICTURES. CONTACT: MICHAELEMAIL: [email protected]––––––––––––––––––––––––––––––––
DYNAPAC CA12 AXLE | NEED REARAXLE FOR DYNAPAC CA12. WOULDPURCHASE ENTIRE NON-RUNNINGMACHINE.CONTACT: NEILPHONE: 320-763-4491EMAIL: [email protected]––––––––––––––––––––––––––––––––D9R | WE LOOKING FOR BULLDOZERD9R AND D9N MANUAL FROM 1988 UPTO 1997 WITH RIPPER SINGLE SHANKCONTACT: OUFIPHONE: 966530185141FAX: 9660127512024EMAIL:[email protected]––––––––––––––––––––––––––––––––SS RIPPER FOR CAT D9N OR D9R. THERIPPER CAN BE USED OR REBUILT IFWELL PRICED.CONTACT: TIAGO DONATOPHONE: (305) 909-9743EMAIL:[email protected]––––––––––––––––––––––––––––––––CAT WHEEL LOADERS | WANTED TOBUY CAT WHEEL LOADER 936E, 950B,950E, 966D, 966F, 970F, 988B, AND 988FIN RUNNING OR NON RUNNING CONDI-TION IF YOU HAVE FOR SALE PLEASEEMAIL ME PHOTOS AND DETAILS.CONTACT: STEVEPHONE: 713-659-0593FAX: 281-727-0415EMAIL:[email protected]––––––––––––––––––––––––––––––––CASE BACKHOE LOADER 580SK, 580L,580M AND 580SM | I AM LOOKING TOBUY CASE BACKHOE 580SK, 580SL,580L, 580SL, 580M AND 580SM IN ANYCONDITION IF YOU HAVE FOR SALEPLEASE CONTACT ME.CONTACT: RIZ SUNESARAPHONE: 832-528-0786FAX: 281-727-0415EMAIL:[email protected]––––––––––––––––––––––––––––––––PAVER | LOOKING FOR BLAW-KNOX PF5510 OR PF3200, THE CLOSER TOWASHINGTON STATE, THE BETTER. CONTACT: SANTIAGO SCARZELLAPHONE: 3055064263EMAIL: [email protected]––––––––––––––––––––––––––––––––TELESCOPIC FORKLIFT | 4-6 TON TELESCOPIC FORKLIFT DIESEL 12-14M1999-2002 GOOD CONDITIONCONTACT: WILFRED OBENGSACKEYPHONE: 233264495065EMAIL:[email protected]––––––––––––––––––––––––––––––––TERRAMITE BACKHOE, USED | TER-RAMITE BACKHOE USED 4X4 DIESELOR GAS. 2003-4-6CONTACT: ALANPHONE: 903-681-2064EMAIL: [email protected]––––––––––––––––––––––––––––––––DIESEL TANK FOR TOWABLE INGER-SOLL RAND AIR COMPRESSOR | THISIS AN OLD, DETROIT MADE PORTABLEINDUSTRIAL AIR COMPRESSOR THATYOU TOW TO WORK SITE. NEEDREPLACEMENT DIESEL GAS TANK ANDCOMPANY DOES NOT STOCK PARTSTHIS OLD.CONTACT: RJPHONE: 801-597-7314EMAIL: [email protected]––––––––––––––––––––––––––––––––
4400 GPM POSITIVE DISPLACEMENTPUMP | SECOND HAND POSITIVE DIS-PLACEMENT PUMP CAPACITY: 3300 -4400 GPM CAPACITY: 750 - 1000 M3/HRPRESSURE: 16 - 20 BAR PRESSURE:230 - 290 PSI TEMPERATURE: 60 CTEMPERATURE: 140 F VISCOSITY OFMEDIUM: 2115 CP MEDIUM: CRUDE OILLOCATION OF PLANT: MALAYSIACONTACT: SYAZWAN ELIASEMAIL: [email protected]––––––––––––––––––––––––––––––––CAT 950B, CAT 950E | I AM LOOKINGFOR CAT WHEEL LOADERS 950E AND950B, PLEASE FEEL FREE TO CON-TACT ME, IF YOU HAVE AVAILABLE ORANY UP COMING UNIT. REGARDSROYAL MACHINERY TRADERSCONTACT: ROYAL TRADERS USA.EMAIL:[email protected]––––––––––––––––––––––––––––––––NATIONAL CRANE BOOM SECTIONS |LOOKING FOR TELESCOPIC BOOMSECTIONS FOR A 880 SERIES NATIONAL CRANECONTACT: MIKE ACHTORPHONE: 847-782-0672FAX: 847-782-0673EMAIL:[email protected]––––––––––––––––––––––––––––––––20 FEET TRAILER WITH 10 TIRESCONTACT: VIJAYPHONE: 9444411691EMAIL: [email protected]––––––––––––––––––––––––––––––––CATERPILLARS DOZER D7H AND G |WANTED GOOD USED CATERPILLARSBULLDOZER D7H AND D7GCONTACT: GABRIEL FOTSOPHONE: 2027101655EMAIL: [email protected]––––––––––––––––––––––––––––––––544G MANUAL PEMBERTON QUICKCOUPLER | 544G / E MANUAL QUICKCOUPLER 544G 20.5 X 25 WHEELS ANDTIRES, WILL TRADE FORESTRY TIRESAND WHEELS.CONTACT: MICKPHONE: 352-400-5026EMAIL: [email protected]––––––––––––––––––––––––––––––––BANDIT254/WOODCHUCK | PREFERDIESEL AND GOOD WORKING CONDITIONCONTACT: CELIAPHONE: 1(806)665-4274FAX: 1(806)665-4275EMAIL:[email protected]––––––––––––––––––––––––––––––––KW DUMP TRUCKCONTACT: JOEL VANDER HEIDENPHONE: 563-357-6273EMAIL: [email protected]––––––––––––––––––––––––––––––––MUSTANG LOADER BUCKET | I AMLOOKING FOR A USED BUCKET WITHTEETH FOR MY 2003 MUSTANG MTL20LOADERCONTACT: MIKE IPSANPHONE: 703-675-3375EMAIL: [email protected]––––––––––––––––––––––––––––––––
Attention Contractors!Post Your Wanted To Buy Listings FREE!
Here’s How! List Your Wanted ItemsIf you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit:
www.ConstructionEquipmentGuide.com/wanted and enter your listings. Inappropriate or Sale Ads will be Deleted
Page 88 • October 29, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
ALEX LYON & SON AUCTIONEERS
www.lyonauction.com315-633-2944�
• Parkersburg, WVFri., October 31, 2014For: Late Model Oilfield Equipment
• Columbus (Delaware), OhioSat., November 1, 2014For: Late Model ConstructionEquipment & more
• Brooklyn, NYTues., November 4, 2014For: Industrial Equipment. Part 1 of 2day sale.
• Saginaw, MIWed., November 5, 2014For: Land Clearing Equipment
• Wilkes Barre, PAWed., November 5, 2014For: Industrial Equipment. Part 2 of 2day sale.
• Port Huron, MIThurs., November 6, 2014For: Major Job Completion
• Rochester, NYFri., November 7, 2014For: Trucking Company Liquidation
• Canastota, NYSat., November 8, 2014For: Late Model ConstructionEquipment & more
• Cato (Syracuse), NYSun., November 9, 2014For: Buses and Light ConstructionEquipment
• Houston, TXTues., November 11, 2014For: Rentals! Late Model Construction& Support Equipment & more
• Gary, INFri., November 14, 2014For: Complete Liquidation Concrete &General Contractor
• Boston, MASat., November 15, 2014For: Late Model Snow Removal &Construction Equipment
• Waterloo, IAThurs., November 20, 2014For: Complete LiquidationEarthmoving Equipment
• Manassas, VAFri., November 21, 2014For: Late Model ConstructionEquipment and more
• Dallas, TXTues., December 2, 2014For: Late & Great Rental FleetConstruction Equipment
• Atlanta, GAWed., December 3, 2014For: Construction Equipment, Support& Trucks
• Las Vegas, NVSat., December 6, 2014For: Large Rental Return Auction
• Odessa, TXTues., December 9, 2014For: Rental Fleet ConstructionEquipment & more
• Atlantic City, NJSat., December 20, 2014For: Late Model Rental Returns
• Albany, NYSat., December 27, 2014For: Rental Fleet ConstructionEquipment & more
• Kissimmee, FLJanuary 31 – February 8, 2015For: 22nd Annual ConstructionEquipment, Trucks & more
RITCHIE BROS. AUCTIONEERS
www.rbauction.com402-421-2631
• Hobbs, NMOctober 30, 2014
• Pittsburgh, PANovember 6, 2014
• Albuquerque, NMNovember 7, 2014
• Champaign, ILNovember 11, 2014
• Houston, TXNovember 12-13, 2014
• Boise, IDNovember 14, 2014
• New Braunfels, TXNovember 14, 2014
• Phoenix, AZNovember 18, 2014
• Tipton, CANovember 19, 2014
• East Brunswick, NJNovember 20, 2014
• Williston, NDNovember 20, 2014
• Las Vegas, NVNovember 21, 2014
• Atlanta, GADecember 2, 2014
• Fort Worth, TXDecember 3-4, 2014
• Nashville, TNDecember 9, 2014
BAR NONE AUCTIONwww.barnoneauction.com866-372-1700�
• Portland, ORThurs., November 13, 2014For: Public Heavy Equipment Auction
BIG IRONwww.bigiron.com800-937-3558�
• ONLINE ONLYOctober 29, 2014
• ONLINE ONLYNovember 5, 2014
• ONLINE ONLYNovember 12, 2014
• ONLINE ONLYNovember 19, 2014
• ONLINE ONLYNovember 26, 2014
• ONLINE ONLYDecember 3, 2014
BLACKMON AUCTIONS, INC.www.blackmonauctions.com501-352-4703
• Little Rock, AROctober 29-31, 2014For: October Contractor’s Auction
• Wilburton, OKWed., November 5, 2014For: Booth Environmental Auction
• Conway, ARNovember 6-7, 2014For: Estate Auction
• Van Buren, ARTues., November 11, 2014For: Arklahoma Pipeline Auction
• Van Buren, ARThurs., November 13, 2014For: Cockrum Welding & Fabrication
• Oxford, MSTues., November 18, 2014For: Deep South Sand & Gravel
• Ozark, ARThurs., December 4, 2014For: One-Owner Auction
CAP AUCTIONSwww.capauctions.com888-300-0005�
• Bryan, TXFri., November 21, 2014For: AG, Truck & ConstructionEquipment
CAT AUCTION SERVICES
www.catauctions.com866-750-9432�
• Pittsburgh, PAThurs., October 30, 2014For: Construction Equipment
• Las Vegas, NVFri., November 14, 2014For: Construction Equipment
• Oklahoma City, OKTues., November 18, 2014For: Construction Equipment
• ONLINE ONLYWed., November 19, 2014For: eQuipment Yard
• Warner, NHFri., November 21, 2014For: Construction Equipment
• Denver, COThurs., December 4, 2014For: Construction Equipment
• Minneapolis, MNTues., December 9, 2014For: Construction Equipment
• Lancaster, PAThurs., December 11, 2014For: Construction Equipment
• ONLINE ONLYWed., December 17, 2014For: eQuipment Yard
• Kissimmee, FLFri., February 13, 2015For: Construction Equipment
COCHRAN AUCTIONS
www.cochranauctions.com�301-739-0538
• Washington County, MDNovember 6-8, 2014For: 3 Day Fall Contractors RegionalEquipment/Truck & Trailer Auction
DAVIS AUCTIONS
www.davisauctionsinc.com�203-758-4087
• Prospect, CTSat., December 13, 2014For: Construction Equipment
EQUIFY AUCTIONS, LLC
www.equifyauctions.com�888-535-8218
• Wills Point, TXNovember 6-7, 2014For: 2 Day Auction Event
GUINN AUCTION COMPANY
www.guinnauctions.com�337-824-0422
• Jennings, LASat., November 1, 2014For: Heavy Construction Equipment &Oilfield Trucks
HILCO INDUSTRIAL, LLC
www.hilcoind.com�877-37-HILCO
• ONLINE ONLYWed., November 5, 2014For: City of Detroit Major MunicipalAuction
HUNYADY AUCTION COMPANY
www.hunyady.com
�800-233-6898
• Livingston, NJ
Wed., November 12, 2014For: Complete Liquidation JogiConstruction, Inc.
I.R.A.Y. AUCTION
www.iraymn.com
�320-968-7230
• Foley, MN
Fri., December 5, 2014For: Heavy Construction Equipment,Truck & Trailer
IRON PLANET AUCTIONS
www.ironplanet.com
�888-433-5426
ONLINE AUCTIONSGo to www.ironplanet.com to view the
complete auction schedules, inspection
reports and to place your bid!
• ONLINE ONLY
October 29, 2014
• ONLINE ONLY
October 30, 2014
• ONLINE ONLY
October 31, 2014
• ONLINE ONLY
November 6, 2014
• ONLINE ONLY
November 19, 2014
JEFF MARTIN
AUCTIONEERS, INC.
www.jeffmartinauctioneers.com
�601-450-6200
• ONLINE ONLY
Wed., October 29, 2014For: Public Surplus LiquidationAuction
• Brooklyn, MS
November 21-22, 2014For: 2 Day Fall Public Auction
J.J. KANE AUCTIONEERS
www.jjkane.com
�855-GO2-KANE
• Kansas City, MO
Thurs., November 6, 2014For: Heavy Equipment
• Philadelphia, PA
Thurs., November 8, 2014For: Heavy Equipment
• Charlotte, NC
Sat., November 13, 2014For: Heavy Equipment
• Portland, OR
Thurs., November 20, 2014For: Heavy Equipment
• Rome, NY
Sat., November 22, 2014For: Heavy Equipment
• Lansing, MI
Thurs., December 6, 2014
• Atlanta, GA
Thurs., December 11, 2014
• West Palm Beach, FL
Sat., December 13, 2014
MARTIN & MARTIN AUCTIONEERS, INC.www.mmaauction.com�864-947-7888
• Princeton, WVWed., October 29, 2014For: Construction Equipment, Trucks,Trailers & more
• Kingsport, TNWed., November 12, 2014For: Large Dismantled Machines &Major Machine Components
• Pelzer, SCFri., November 14, 2014For: Const/Farm Equipment, Trucks,Trailers & more
• Lenoir, NCWed., November 19, 2014For: Construction Equipment &Related items
MOTLEY’S AUCTION GROUPwww.motleys.com�804-232-3300
• Richmond, VAThurs., November 13, 2014For: Construction Equipment & Trucks
PETROWSKY AUCTIONEERS INC.www.petrowskyauctioneers.com�860-642-4200
• Newark, NJThurs., October 30, 2014For: Heavy Construction Equipment &more
• South Windsor, CTFri., November 7, 2014For: Complete Dispersal – FolsomConstruction, LLC
• South Windsor, CTSat., November 8, 2014For: Complete Dispersal – Folsom J&HSlater Construction Co.
• Plaistow, NHNovember 14-15, 2014For: Complete Dispersal – S&RConstruction Enterprises
• Bristol, CTFri., December 5, 2014For: Major Equipment Liquidation
• North Franklin, CTDecember 19-20, 2014For: Major Public Auction – AreaContractors & Equipment Dealers
PURPLE WAVE AUCTIONwww.purplewave.com�866-608-9283
• ONLINE ONLYThurs., October 30, 2014For: Forestry & ConstructionEquipment
• ONLINE ONLYThurs., November 6, 2014For: Construction Equipment
• ONLINE ONLYTues., November 18, 2014For: Truck & Trailer Auction
• ONLINE ONLYThurs., November 20, 2014For: Construction Equipment
ROLLER AUCTIONEERSwww.rollerauction.com�866-515-1668
• Denver, COWed., November 12, 2014For: Heavy Construction & ContractingEquipment
SCOTT PERRY & CO.www.scottperryco.com716-283-7653
• Savona, NYWed., October 29, 2014For: NYS Dept. of EnvironmentalConservation
• North Syracuse, NY
Thurs., October 30, 2014For: NYS Dept. of Transportation
• Pittsford, NY
Wed., November 5, 2014For: NYS Dept. of Transportation
• Batavia, NY
Thurs., November 6, 2014For: NYS Police – Troop “A”
• Canandaigua, NY
Thurs., November 6, 2014For: NYS Police – Troop “E”
• Newark, NY
Fri., November 7, 2014For: NYS Office for People WithDevelopmental Disabilities
SHETRON AUCTIONS
www.shetronequipment.com
�717-532-8828
• Shippensburg, PA
Fri., October 31, 2014For: Construction & Farm Equipment
• Shippensburg, PA
Fri., December 19, 2014For: Construction & Farm Equipment
STEFFES GROUP INC.
www.steffesgroup.com
�701-237-9173
• ONLINE ONLY
November 5-12, 2014For: November Monthly Auction
• Osceola, WI
November 17-25, 2014For: Frontier AG & Turf Inventory
• West Fargo, ND
Wed., December 3, 2014For: Agron West Fargo Event
• Montevideo, MN
Tues., December 9, 2014For: Kibble Equipment Late ModelEquipment Auction
• ONLINE ONLY
December 3-10, 2014For: December Monthly Auction
• ONLINE ONLY
December 8-16, 2014For: 2 Day Dealer RealignmentAuction
STOREY’S
www.storeys.ca
519-641-2844
• London, ON
November 4-5, 2014For: 2 Day Major Public HeavyEquipment, Trucks, Scrap, Real Estate,etc.
WAYNE PIKE
AUCTION COMPANY
www.waynepikeauction.com
763-389-5700
• Princeton, MN
Sat., December 6, 2014For: Heavy Equipment
YODER & FREY
AUCTIONEERS, INC.
www.yoderandfrey.com
�419-865-3990
• Kissimmee, FL
February 9-16, 2015For: 41st Annual – 7 day Auction
AuctionsComingTo view information on upcoming auctions visit our
Auction Calendar at www.constructionequipmentguide.com
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2014 • Page 89
BUY ONLINE
The new way to buyused equipment
Visit allEquip.com or call 855-827-1515
2006 Komatsu FG25T-16 Pneumatic Tire Forklift – $9,000
2005 JLG 3246ES Electric Scissor Lift – $7,750
2007 Bobcat 335G Mini Excavator – $22,500
2003 Bobcat S185 Skid-Steer Loader – $14,500
2005 JLG 460SJ 4WD Diesel Telescopic Boom Lift – $18,900
2007 Skytrak 6042 Telehandler – $24,500
2007 Case 580M Series 2 4x4 Backhoe Loader – $33,900
Excavators | Landscape Equipment | Generators | Trenching Equipment | Sweepers/Scrubbers | and much more!
Low, no-haggle pricing. Inspected. Ready for work. Guaranteed.
2005 JLG 460SJ 4WD Dieselelesco TTelescopic Boom Lift – $18,900
2005 JLG 460SJ 4WD Dieselelescopic Boom Lift – $18,900
2007 Case 580M Series 2 4x4Backhoe Loader – $33,900
2007 Case 580M Series 2 4x4Backhoe Loader – $33,900
2007 Skytrak 6042elehandler – $24,500TTelehandler – $24,500
2007 Skytrak 6042elehandler – $24,500
2006 Komatsu FG25Te Fo Pneumatic Tir re Forklift
-16 FG25T T-16$9,000–e Forklift
2005 JLG 3246ESElectric Scissor Lift – $7,750
2005 JLG 3246ESElectric Scissor Lift – $7,750
2007 Bobcat 335GMini Excavator – $22,500
2007 Bobcat 335GMini Excavator – $22,500
2003 Bobcat S185Skid-Steer Loader – $14,500
2003 Bobcat S185Skid-Steer Loader – $14,500
ed arEquipment featur
Excavators | Landscape Equipment | Generators | T
esentation of items available on allEquip. Items arepre a red ar
Excavators | Landscape Equipment | Generators | T
e sold and added to inventory dailyesentation of items available on allEquip. Items ar
enching Equipment | Sweepers/Scrubbers | and much morrExcavators | Landscape Equipment | Generators | T
e sold and added to inventory daily
isit V allEquip.com
enching Equipment | Sweepers/Scrubbers | and much mor
.
allEquip.com or call 855-827
e sold and added to inventory daily
enching Equipment | Sweepers/Scrubbers | and much mor
5151- 855-827
e!enching Equipment | Sweepers/Scrubbers | and much mor
Page 90 • October 29, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2014 • Page 91
TERMS: Complete payment or a minimum requirement of 20% deposit day of sale in Cash, Certified Check or Guaranteed Funds. Balance due within 4 days. NH Lic #2966
ONLINE BIDDING THROUGH EQUIPMENTFACTS
CALL FOR INFORMATION AND PICTURE BROCHURES.
Salt Lake City, UT (801) 355-4500 Columbus, OH (614) 444-4300Wharton, NJ (973) 659-3330 Providence, RI (401) 455-0200Milford, NH (603) 672-4100 Boston, MA (617) 427-8888
275 Route 32, North Franklin, CT 06254, (860) 642-4200, Fax: (860) 642-7900www.petrowskyauctioneers.com
UPCOMING AUCTIONSONE OWNER – COMPLETE DISPERSAL AUCTION for FOLSOM CONSTRUCTION, LLC (Due to Owner’s Untimely Passing)
THE FINEST ONE OWNER INVENTORY OF HEAVY EQUIPMENT, TRUCKS & TRAILERS EVER SOLD AT PUBLIC AUCTION FROM ONE OF CT’s PREMIER CONTRACTING FIRMS PARTIAL LISTING: EXCAVATORS: CRAWLER TRACTORS & LOADERS: RUBBER TIRED LOADERS: TRACTOR LOADER BACKHOES: SKID STEERS: COMPACT TRACK LOADERS: SKID STEER ATTACHMENTS: PAVING EQUIPMENT: CRUSHING & SCREENING: COMPACTORS & ROLLERS: BOOM LIFTS: MOTOR GRADERS: BUCKETS & ATTACHMENTS: TRUCK TRACTORS: TRI & T/A DUMPS: S/A DUMPS: SWEEPERS: DETACHABLE &
LOWBED TRAILERS: DUMP TRAILERS: TAG-ALONG & OTHER H.D. EQUIPMENT TRAILERS: SERVICE & UTILITY TRUCKS: FLATBED & VAN BODY TRUCKS: FUEL & LUBE TRUCKS: WATER TRUCKS: FLEET VEHICLES:SNOW HANDLING TRUCKS & EQUIPMENT: CAB & CHASSIS: TRENCH BOXES & ROAD PLATES: COMPRESSORS: LIGHT TOWERS: SCISSOR& PERSONNEL LIFTS: INDUSTRIAL FORKLIFTS: SEA & STORAGE CONTAINERS:
ANTIQUE TRACTORS & EQUIPMENT: COMMERCIAL LANDSCAPE & GROUNDS CARE EQUIPMENT: SUPPORT EQUIPMENT: COLLECTIBLES: AND MORE!
ONE OWNEREQUIPMENT & ROLLING STOCK INVENTORY DISPERSAL AUCTION for
J&H SLATER CONSTRUCTION CO., INC. (Owner’s Retiring)
45 YEARS IN BUSINESSCOMPLETE INVENTORY OF SITE DEVELOPMENT & EXCAVATION EQUIPMENT, TRUCKS, TRAILERS, SHOP EQUIPMENT, TOOLS & SUPPLIES
PARTIAL LISTING: EXCAVATORS: CRAWLER TRACTORS & LOADERS: RUBBER TIRED LOADERS: TRACTOR LOADER BACKHOES: SKID STEERS: CRUSHING & SCREENING: PAVEMENT MILLERS: COMPACTORS &ROLLERS: ROUGH TERRAIN FORKLIFTS: ARTICULATED & RIDGID FRAME END DUMPS: BUCKETS & ATTACHMENTS: TRUCK TRACTORS TRI & T/A DUMPS: S/A DUMPS: DETACHABLE & LOWBED TRAILERS: TAG-ALONG& OTHER H.D. EQUIPMENT TRAILERS: TANK TRUCKS: SERVICE & UTILITY TRUCKS: FLATBED TRUCKS: FLEET VEHICLES: SEA CONTAINERS: TRENCH & SHORING BOXES & ROAD PLATES: GENERATORS: COMPRES-
SORS: WELDERS: LIGHT TOWERS: SUPPORT EQUIPMENT: AND MORE!
ONE OWNER – 2 DAYSCOMPLETE EQUIPMENT & ROLLING STOCK DISPERSAL AUCTION for
S&R CONSTRUCTION ENTERPRISES (Owners Pursuing Other Interests)
ONE OF NH’s MOST VENERABLE & REVERED CONTRACTING FIRMS
MAJOR INVENTORY OF HEAVY EQUIPMENT, TRUCKS, TRAILERS, REPAIR EQUIPMENT & TOOLING, BUCKETS & ATTACHMENTS SALE FEATURES - 2009 Yutong YTRD 280 Rotary Drill Mtd On Cat 336D Track Unit, Multiple Kelly Bars & Bits
MAJOR INVENTORY OF JOB SITE SUPPORT EQUIPMENT & TOOLS, JOB MATERIAL OVER RUNS, & STORAGE CONTAINERS
PLEASE NOTE: Both Sites are on the Same Road, 100 Yards Apart
MAJOR EQUIPMENT LIQUIDATION AUCTION for
M&M TENNIS COURT CO., INC. & AREA CONTRACTORS & EQUIPMENT DEALERS
COMPLETE INVENTORY OF COMMERCIAL & RESIDENTIAL GRADING, PAVING & SITE DEVELOPMENT EQUIPMENT, TRUCKS, TRAILERS, FLEET VEHICLES, SUPPORT & REPAIR EQUIPMENT & TOOLS Due to limited space consignments are subject to advance approval
2 DAY MAJOR PUBLIC EQUIPMENT AUCTION with equipment from PINE BUSH EQUIPMENT (Rental Return)& AREA CONTRACTORS & EQUIPMENT DEALERS
275 ROUTE 32, NORTH FRANKLIN, CT 06254
CONSTRUCTION, EARTHMOVING & SITE DEVELOPMENT EQUIPMENT, TRUCKS & TRAILERS
GENERAL CONTRACTOR SUPPORT, AG, LANDSCAPE & MFG EQUIPMENT
FRIDAY, NOVEMBER 7, 9:00 AM 138 RYE STREET, SOUTH WINDSOR, CT 06074
SATURDAY, NOVEMBER 8, 9:00 AM 75 COMMERCE WAY, SOUTH WINDSOR, CT 06074
FRIDAY, NOVEMBER 14, 9:30 AM 121-123 NEWTON ROAD, PLAISTOW, NH 03865 (S&R Maintenance Facility)
SATURDAY, NOVEMBER 15, 9:30 AM 185 SOUTH MAIN ST, NEWTON, NH 03858 (S&R Office & Storage Facility)
FRIDAY, DECEMBER 5, 9:30 AM 131 MINES ROAD, BRISTOL, CT 06010
DAY 1� FRIDAY, DECEMBER 19, 8:30 AM
DAY 2� SATURDAY, DECEMBER 20, 8:30 AM
Page 92 • October 29, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
To view our Business Calendar online,
go to www.constructionequipmentguide.com.
AGC OF MINNESOTAHealth Care Reform Seminar: A Refresher Course and aPrimer on New Reporting Requirements – OCTOBER 30,2014 at the Radisson Hotel, Roseville, MNReady or not, health care reform is kicking into full gear foremployers in 2015. Now is the time to make sure yourcompany is ready to report. Join us for a “walk” throughthe new forms, with lots of opportunities to ask questions.Everyone in your firm who has responsibility for insuranceor employee benefits should attend this seminar. Presenter: Monica Kelley, Esq., Gray Plant MootySeminar: 7:30 AM to 9:30 AMRegistration Fee: $25 per person (includes breakfast)Register: Online at www.agcmn.orgQuestions??? Contact Denise Woods, 651/796-2186 [email protected]
TRIMBLE DIMENSIONS 2014 IS THE PLACE TO BE IN NOVEMBER. REGISTER NOW!NOVEMBER 3 thru 5, 2014 LAS VEGAS, NEVADATrimble Dimensions User Conference 2014 is the mustattend conference for industry professionals such as your-self. Haven’t attended in the past? Well, here’s whatyou’ve been missing! . Over 400 sessions lead by industry experts. Pavilion with the latest technology showcased. Unlimited networking opportunities. Peer-to-peer collaboration. Professional Development House (PDH). Hands-on training. Special events – plus more!Dimensions 2014 is the place to be in November.Discover first-hand how you can transform the way youwork by integrating advanced positioning technology,field and office applications and real time communica-tions.For more information, contact:www.TrimbleDimensions.com or Email:[email protected] OF MINNESOTACONSTRUCTION FINANCIAL MANAGEMENT CONFERENCENOVEMBER 5 THROUGH 7, 2014 IN LAS VEGAS, NEVADAThe AGC/CFMA Construction Financial ManagementConference will be held on November 5 – 7, 2014 in LasVegas, Nevada. Get the latest information on: ConstructionMarket Trends; Financial Accounting Standards Board;Surety, Financial, and Credit Markets, Change Order andClaims Management; Federal acquisition regulations; con-struction taxes; strategies for economic conditions; busi-ness real estate management; ethics and fraud. Registerbefore September 5th: $780/After September 5th: $860.Conference Details are available athttp://meetings.agc.org/agc _cfma.
Ohio Aggregates & Industrial Minerals Association(OAIMA)OAIMA 2014 Annual Meeting & Trade ShowHilton Columbus Hotel, Easton Town Center, Columbus,OhioDates: November 13-14, 2014Hotel Information: Hilton Columbus Easton3900 Chagrin DriveColumbus, Ohio 43219Telephone: 614/414-5000
AGC of MINNESOTASAVE THE DATES!!!. December 4th – Presidents/Holiday Reception,Minnesota History Center, St. Paul. December 11th – AGC/MnDOT Grading and BaseTechnology ForumThe Minneapolis Boulevard Hotel, Brooklyn Center
. January 15th – 95th Annual meeting, MinneapolisMarriott Southwest, MinnetonkaDETAILS of each will be available over the coming weeks!
CRC/ICHC 2014Crane & Rigging Conference / Industrial Crane & HoistConferenceDATES: December 3 – 4, 2014 LOCATION: Hilton Houston Nasa Clear Lake Hotel,Houston, TXThe event will be held adjacent to the Space CenterHouston and NASA’s Johnson Space Center. CRC/ICHC(Crane and Rigging Conference/Industrial Crane and HoistConference) is an independent conference which offerseducation and networking opportunities for safety and riskmanagers, crane and rigging supervisors, lift directors,project managers, and others responsible for managingcrane and rigging operations in construction and heavyindustry. More than just a lecture-style conference,CRC/ICHC offers attendees opportunities for networking insmall groups, experiencing hands-on learning, and thechance to visit vendors during exhibit hours.Who Attends? Typical attendees include contractors, engi-neering firms, various construction user groups, unions,and crane and rigging professionals. The conference ses-sions are geared for safety and risk managers, crane andrigging supervisors, fleet managers, and small businessowners. To submit a speaker proposal, go to https://maxcapme-dia.wufoo.eu/forms/crcichc-2014call-for-speakers/. Formore information on exhibiting, contact Mark Bridger,[email protected].
AGC CONVENTION 96th Annual AGC Convention DATE: March 18-20, 2015PLACE: San Juan, Puerto RicoJoin us for the Convention!!! Business Suit OptionalNo one knows the future, but gaining a comprehensiveview of where you are, where you are going and where youneed to be can only strengthen the educated decisionsconstruction professionals have to make every day.Take the opportunity to step outside, analyze the directionyour organization is heading, listen and compare that withother construction professionals and take that perspectiveback to your organization.As our premier event each year, the AGC Convention andTechnology & Construction Solutions Expo is the idealopportunity to see everything AGC can do for you and yourbusiness. This year’s convention will include professionaldevelopment sessions covering:. Workforce Development. Drones in Construction. Leadership. Risk Management. Quality Control. Marketing. Much More! For more information, please contact The AssociatedGeneral Contractors of America. General Inquiries: 703/548-3118AGC Store Inquiries: 800/242-1767Convention.AGC.org
AEM MEDIA SERVICES presents BAUMA CONEXPOAFRICA BAUMA CONEXPO AFRICA will be held September 15 to18, 2015 at the Johannesburg Expo Centre inJohannesburg, South Africa.The show is owned and organized by the Association ofEquipment Manufacturers (AEM) and Messe MunchenInternational (MMI). Exhibit space sales are now open forBauma ConExpo Africa 2015. Companies applying forspace by February 12, 2015, will be included in the firstround of booth assignments. After that date, applicationswill be accepted on a first come, first served basis. World-class exhibition in important marketplaceExhibitors at the last show pointed out the high quality ofattendees. The 2015 show venue is the country’s largestpurpose-built exhibition and events facility, offering a mod-ern space and services. And, show participants benefitfrom the global experience and customer service of AEM,organizer of CONEXPO-CON/AGG, and MMI, organizer ofBAUMA. BAUMA CONEXPO AFRICA has broad-based sup-port from leading industry groups in Africa and worldwide.After 2015, the show goes to a three-year cycle inresponse to local and international industry input. AEM isshow exhibitor contact for the Americas: visit the showwebsite: www.bcafrica.com for more details. Contact AEMat [email protected] or by telephone +1-414-298-4150/toll free U.S. and Canada 800-867-6060.
BusinessCalendar
FEATURING Assets fromCommonwealth of Virginia FinancialInstitutions, Contractors & Others.
ASSETS Include Excavators,Dozers, Loaders, Road Tractors,Dump Trucks, Services Trucks,Pickups, Autos & More!
Financing NowAvailable!
UPCOMING AUCTIONRICHMOND, VA
CONSTRUCTIONEQUIPMENT & TRUCKS
THURSDAY, 11/13 @ 9 AM
ON-SITE & LIVE ONLINE BIDDING SALE LOCATION: 1
M
T
MOTLEYS
L
3600 Deepwater Terminal Road, Richmond, VA 23234
PREVIEW DATES:Mon. & Tues., Nov. 10th & 11th, 9AM-4PMWed., Nov. 12th, 8AM-5PMSale Day beginning 7AM
Onsite buyers will register with Motleysstaff upon arrival. All Internet Buyers mustregister online.
MOTLEYS INDUSTRIALA Division of Motleys Asset Disposition Group 804-232-3300 EXT. 4
For complete terms & conditions, visit:
1
M
T
LET US HELP TURN YOUR ITEMS INTO CASH! We are now accepting items for our upcoming auctions! Sell your items with Motleys and get Top Dollar Competitive Results through our international advertising campaign and live online bidding.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2014 • Page 93
Page 94 • October 29, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
ADVERTISER INDEX
The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.
ACT CONSTRUCTION ..............................................................................31ASC CONSTRUCTION EQUIPMENT USA ........................................2,3,10B3C FUEL SOLUTIONS ............................................................................31BAIR PRODUCTS INC ..............................................................................34BARGAINS ................................................................................................86BENCH MARK TOOL & SUPPLY ..............................................................15BLANCHARD MACHINERY INC ..........................................................11,68BOMAG ......................................................................................................61BROOKS SALES INC ................................................................................22CASE CONSTRUCTION............................................................................47CATERPILLAR OF FLORIDA ....................................................................25CEG SCALE MODELS ..............................................................................84CLASSIFIEDS ............................................................................................86CLEVELAND BROTHERS EQUIPMENT CO ......................................16,17COMPANY WRENCH ................................................................................23CONSTRUCTION EQUIPMENT GUIDE
TRAILER PROMO ............................................................................55FLORIDA AUCTION PROMO 2015 ..................................................32WANTED ..........................................................................................87REACH YOUR MARKET ..................................................................74TARGETED EMAIL ..........................................................................80BEAZLEY AUCTION PROMO ..........................................................93
DOMINION EQUIPMENT PARTS ..............................................................53EFFICIENCY PRODUCTIONS ..................................................................37EQUIFY AUCTIONS LLC ..........................................................................90FAE USA INC ............................................................................................60FLAGLER CONSTRUCTION EQUIP LLC ................................................6,7FLANGE LOCK ..........................................................................................37FLINT EQUIPMENT COMPANY USED ....................................................18FLUID CONTROL SERVICES....................................................................26G S EQUIPMENT ........................................................................................9GOMACO CORP........................................................................................67HALE TRAILER BRAKE & WHEEL ..........................................................41HILLS MACHINERY COMPANY ................................................................96HITACHI CONSTRUCTION MACHINERY............................................72,73HYDREMA U S INC....................................................................................29HYUNDAI....................................................................................................35HYUNDAI CONSTRUCTION EQUIPMENT ..............................................71IRONPLANET ............................................................................................89J H WILLIAMS OIL COMPANY INC ..........................................................18JACKSONVILLE CRANE ..........................................................................22JCB INC ................................................................................................76,77JFW EQUIPMENT INC ..............................................................................64JOHN DEERE ............................................................................................49JOHN DEERE SKID STEER......................................................................81KOMATSU AMERICA CORP............................................................38,39,51
KUBOTA SVL..............................................................................................79KUHN EQUIPMENT SALES INC ..............................................................27LEEBOY ................................................................................................62,63LINDER INDUSTRIAL MACHINERY CO ....................................................5MACKINNON EQUIPMENT & SERVICE ..................................................33MAY HEAVY EQUIPMENT ........................................................................13MGL ENGINEERING..................................................................................24MINNICH MANUFACTURING....................................................................60MOBRO MARINE INC................................................................................19MOTLEY'S AUCTION & REALTY GROUP
RICHMOND VA ................................................................................92NEXTRAN OF JACKSONVILLE ................................................................24NPK CONSTRUCTION EQUIPMENT INC ................................................43OKADA AMERICA ......................................................................................26PAC SOUTH ..............................................................................................37PETROWSKY AUCTIONEEERS INC
SOUTH WINDSOR CT ....................................................................91PINNACLE CENTRAL CO..........................................................................22POWERSCREEN ......................................................................................85RING POWER CRANE ..............................................................................14ROAD BUILDERS MACHINERY................................................................68ROADTEC ..................................................................................................57ROSCO MFG CO ......................................................................................66SAKAI AMERICA INC ................................................................................64SCOTT-GALLAHER INC ............................................................................14SOLESBEES EQUIP & ATTACHMENTS ..................................................34SOUTHERN QUALITY TRUCK..................................................................24TAKEUCHI..................................................................................................69TRACTOR TRACS INC..............................................................................53TREKKER TRACTOR ................................................................................21TRENCH SHORING SERVICES................................................................40VISIONAIRE INC........................................................................................26VOLVO COMPACTION ..............................................................................65VOLVO CONSTRUCTION EQUIPMENT ..................................................95WACKER NEUSON....................................................................................83WIRTGEN AMERICA ............................................................................58,59YANMAR AMERICA ..................................................................................75
GEORGIA SUPPLEMENTBOBCAT OF ATLANTA ..............................................................................11CENTRAL ATLANTA TRACTOR ..................................................................2JCB OF GEORGIA ......................................................................................3LASHLEY TRACTOR SALES ......................................................................9REYNOLDS-WARREN EQUIPMENT CO....................................................5TRACTOR & EQUIPMENT CO INC ..........................................................12YANCEY BROTHERS CO ........................................................................6,7
To read articles about these CEG advertisers, visit www.constructionequipmentguide.com
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2014 • Page 95
COWINEQUIPMENT CO., INC.ALABAMABIRMINGHAM800-239-2694MOBILE800-223-6755MONTGOMERY800-239-6642MADISON256-350-0006HUNTSVILLE800-239-7368OXFORD800-917-7931
FLORIDA7950 PITTMAN AVE.PENSACOLA, FL 32534800-239-4736850-479-3004
MCCLUNG-LOGAN EQUIPMENT COMPANYVIRGINIACHESAPEAKE757-485-3314RICHMOND804-266-0000ROANOKE540-989-3750WISE276-328-8027MANASSAS703-393-7344WINCHESTER540-722-3700
Volvo Construction Equipment
* Ask about our Fuel Efficiency Guarantee by contacting a Volvo dealer near you, or visit volvoce.com/NAFuel to learn more.
YOU CHOSE GUARANTEED* FUEL EFFICIENCYWITH EXCEPTIONAL DEALER SUPPORT.
Smart Works.
Page 96 • October 29, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
North Carolina
South Carolina
Call Today!
oday!Call T Today!
.hillsmachinerwww
.comy.hillsmachiner
252-758-4163FaxPhone 252-752-7145877-549-3232
eenville, NC 27834Greet315 Easy Str
eenvilleGrNorth Carolina
oday!Call T Today!
Fax Phone 919-746-7938888-986-8680Raleigh, NC 276041501 Hedingham Blvd.Raleigh
Fax Phone888-830-5939Columbia, SC 292091014 Atlas WColumbiaSouth Carolina
919-746-7939Fax Phone 919-746-7938888-986-8680Raleigh, NC 276041501 Hedingham Blvd.Raleigh
FaxPhone866-830-7577North Charleston, SC 294187168B CrCharleston
803-233-4482Fax 803-658-0200Phone
888-830-5939Columbia, SC 29209
ay 1014 Atlas WColumbiaSouth Carolina
843-225-9378843-225-9377
866-830-7577North Charleston, SC 29418
oss County Road 7168B CrCharleston
Skid SteersYou Can Depend On
Alpha Series Skid Steers• Enjoy unmatched operator comfort
with the largest cabs in the industry• Lift more with increased stability
thanks to its long wheelbase• Run your best all the time
because maintenance is easy
Backed by Hills Machinery A Dealer You Can Count On
North CarolinaGreenville315 Easy StreetGreenville, NC 27834877-549-3232Phone 252-752-7145Fax 252-758-4163
Raleigh1501 Hedingham Blvd.Raleigh, NC 27604888-986-8680Phone 919-746-7938Fax 919-746-7939
Charlotte11717 Reames RoadCharlotte, NC 28269888-986-8680Phone 704-208-5564Fax 704-208-5565
South CarolinaColumbia1014 Atlas WayColumbia, SC 29209888-830-5939Phone 803-658-0200Fax 803-233-4482
Charleston7168B Cross County RoadNorth Charleston, SC 29418866-830-7577Phone 843-225-9377Fax 843-225-9378
Now Openin Charlotte!
Now Open
in Charlotte!