Southern Motorcycle 2016 Product Catalog

DRIVE

APPAREL

ELECTRIC

FUEL/AIR

LUGGAGE

SECURITY

TOOLS

H20

CHINESEPARTS

ACCESS

CLUTCH

CHEMICAL

CONTROL

PISTONS

BODY

ENGINE

BRAKES

WHEELS

engine TypeS

130 ORDERS.SOuThERNMS.cOM / FAX 858-560-4626 SOUTHERNRefer to BRAND web-site for M.A.P. policy

Type 1 - 22cc - 49cc 2-STroke engineSfound in pockeTbikeS, pockeTquadS & STand-up ScooTerS

47/49cc mT-a1 air-cooled

47/49cc mT-a4 WaTer-cooled

X-STyle 22-26cc,

33-36cc air-cooled

X-STyle

43/49cc air-cooled

TYPE 1: 22cc to 49cc 2-stroke engines are commonly used in ‘Pocket’ or ‘Mini’ style vehicles - Pocketbikes, Pocketquadsand Pocketscooters all used these engines. MT-A1/A4 engines can be found in both Pocketbikes and Pocketquads.The MT-A1 engine is a 47cc air-cooled engine, commonly described as a 49cc engineThe MT-A4 engine is a water-cooled version of the MT-A1 motorThe ‘X-Style’ engines are commonly found in higher performance 2-stroke units and stand-up scooters

TECH TIP: Verify the engine type and check the item description to ensure parts compatibility

Type 2 - 50cc - 125cc horizonTal 4-STroke engineSfound in Small To mid-Sized moTorcycleS, quadS & ScooTerS

TYPE 2: 50cc to 125cc horizontal style 4-stroke engines are commonly used in many of the small/mid-sized vehicles andcome in automatic, semi-automatic and manual models. The majority of these engines are air-cooled. Howeversome performance versions are oil-cooled. They can be found with electric start, kick start and or electric/kick startconfigurations. Engine sizes range from 50cc to 125cc (some 140/155cc models were also sold but are rare).The physical size of the engine is the same. These engines are well known for their affordability and quality.

TECH TIP: Note the position of the starter motor for space consideration if replacing a complete motor and/or ordering parts

MORE INFORMATION

MORE INFORMATION

Shroud colorSmay vary

http://www.southernms.com/wp-content/uploads/2015/05/08_drive.pdf

http://www.southernms.com/wp-content/uploads/2015/05/02_hlmt_apparel.pdf

http://www.southernms.com/wp-content/uploads/2015/05/09_electrical.pdf

http://www.southernms.com/wp-content/uploads/2015/05/11_fuel_exh.pdf

http://www.southernms.com/wp-content/uploads/2015/05/21_lugg.pdf

http://www.southernms.com/wp-content/uploads/2015/05/20_locks.pdf

http://www.southernms.com/wp-content/uploads/2015/05/14_tools.pdf

http://www.southernms.com/wp-content/uploads/2015/05/16_h2o.pdf

http://www.southernms.com/wp-content/uploads/2015/05/07_chinese_parts.pdf

http://www.southernms.com/wp-content/uploads/2015/05/01_accessories.pdf

http://www.southernms.com/wp-content/uploads/2015/05/06_clutch.pdf

http://www.southernms.com/wp-content/uploads/2015/05/05_chemicals.pdf

http://www.southernms.com/wp-content/uploads/2015/05/17_control.pdf

http://www.southernms.com/wp-content/uploads/2015/05/13_pistons.pdf

http://www.southernms.com/wp-content/uploads/2015/05/03_body.pdf

http://www.southernms.com/wp-content/uploads/2015/05/10_engine.pdf

http://www.southernms.com/wp-content/uploads/2015/05/19_brakes.pdf

http://www.southernms.com/wp-content/uploads/2015/05/18_wheel.pdf

http://orders.southernms.com

http://www.outsidedistributing.com

131M.SOuThERNMS.cOM / TEL 858-560-5005

APPAREL

ELECTRIC

FUEL/AIR

LUGGAGE

SECURITY

TOOLS

H20

CHINESEPARTS

ACCESS

CLUTCH

CHEMICAL

CONTROL

PISTONS

BODY

ENGINE

DRIVE

BRAKES

WHEELS

SOUTHERN

uPDATED APPLIcATIONSwww.outsidedistributing.com

Refer to BRAND web-site for M.A.P. policy

Type 3 - 50cc - 250+cc ‘gy6’ STyle, 4-STroke engineSfound in aTvS, dunebuggyS & ScooTerS

TYPE 3: 50cc to 250cc GY6 4-stroke engines can be found in many configurations of long and short engine cases and sold indrum or disc brake configurations. Manufacturers use these engines for units with automatic shifting as they useCVT Belt Drive. GY6 engines are very easy to spot given the length and shape of the cases. Most of these engineswill have both electric and kick start options. These are very reliable motors and known for reliable power,although not overly powerful, commonly found in ATVs, dunebuggys and scooters.CN engines are GY6 250cc 4-stroke single cylinder motorsCF engines are GY6 250cc 4-stroke single cylinder motors & used in CF Moto branded vehicles

Type 4 - 125cc - 300+cc verTical 4-STroke engineSfound in aTvS, moTorcycleS & ScooTerS

TYPE 4: 125cc to 300+cc vertical style 4-stroke engines are available in many configurations, the single cylinder versionsbeing the most popular. When ordering engine parts it is important to note if it is a ‘CB style’ or a ‘CG style’ engine.CB style engines are overhead cam (OHC) single cylinder motorsCG style engines are overhead valve (OHV) single cylinder motors & are the most commonly used

TECH TIP: Many OE manufacturers used subpar internal components in the original carburetorReplacing the stock carburetors instead of attempting repair is recommended

MORE INFORMATION

MORE INFORMATION

http://m.southernms.com





















DRIVE

APPAREL

ELECTRIC

FUEL/AIR

LUGGAGE

SECURITY

TOOLS

H20

CHINESEPARTS

ACCESS

CLUTCH

CHEMICAL

CONTROL

PISTONS

BODY

ENGINE

BRAKES

WHEELS

igniTion coilS


Type-1 47/49cc mT-a1 igniTion coil

Fits most Pocketbikes & Pocketquads with Type-1 47/49cc MT-A1 air-cooled 2-stroke engines• Plug wire length: 138mm(5.5”)• Cap type: Rubber plug cap• Mounting: 2 bolts @ 53mm(2”) spacing

OD080300

NOTE: Works best with NGK BM6A or BM7A sparkplugs

Type-2 125cc horizonal igniTion coil

Type-3 125-150cc gy6 igniTion coil &

SelecTed Type-4 verTical igniTion coil

Fits selected Type-2 125cc horizontal engines, Type-3125/150cc GY6 4-stroke engines & Type-4 vertical engines,common on ATVs, dirtbikes, dunebuggys and scooters• Provides higher intensity sparks and energy• Plug wire length: 380mm(15”) approx• Input wires: 2 male lugs on bottom• Cap type: 135° angled plastic plug cap• Mounting: 1 bolt

OD080304

NOTE: Some horizontal style 125cc motors use this coil while othersuse either part# OD080301MB or OD080301NBType-1 43/49cc X-STyle igniTion coil

for ‘gS moon’ engineS

Fits Type-1 43/49cc ‘GS MOON’ branded engines• Plug wire length: 138mm(5.5”)• Input Wires: 2 - Black coil wire has loop connector

(Not attached to coil)• Mounting: 2 bolts @ 62mm(2.4”) spacing

OD080310

NOTE: Will NOT fit Type-1 MT-A1 style enginesWorks best with NGK BM6A or BM7A plugs

Type-4 150-250cc igniTion coil

Fits Type-4 150-250cc vertical 4-stroke enginesfound in many ATVs and dirtbikes• Plug wire length: 470mm(18.5”) approx• Input wires: 1 male lug• Cap type: Plastic plug cap• Mounting: 2 bolts @ 54-58mm(2.2”) spacing

OD080307

Type-2 & 4 50-150cc igniTion coil

WiTh mounTing brackeTFits many 50-150cc Type-2 horizontal & Type-4 vertical4-stroke engines usually found in ATVs, dirtbikes & go-karts• Plug wire length: 430mm(17”) approx• Input wires: 2 @ 255mm(10”) length• Cap type: Plastic plug cap• Mounting: Bracket with single stud

OD080301MB

NOTE: Works with Chinese sparkplug A7TC orNGK sparkplug C7HSA or CR7HSA

Type-2 & 4 50-150cc igniTion coil

WiThouT mounTing brackeT

Fits many 50-150cc Type-2 horizontal & Type-4 vertical4-stroke engines commonly found in ATVs, dirtbikes & go-karts - NO mounting bracket• Plug wire length: 200mm(8”) approx• Input wires: 1 male lug• Cap type: Plastic plug cap• Size: 70mm(2.75”) - coil pack including metal plates • Mounting: 2 bolts @ 58mm(2.2”) spacing

OD0080301NB

NOTE: Works with Chinese sparkplug A7TC or NGK sparkplug C7HSA or CR7HSA




















Many owners have had to replace CDIs after only a few rides on a new unit due to poor quality CDI boxes.

Typical Capacitor Discharge Ignition (CDI) module consists of a small transformer, a charging circuit, a triggering circuit and a main capacitor. A majority of CDIs supplied on new Chinese vehicles and soldby other aftermarket suppliers lack the quality internal components to ensure reliability for your customer.

Outside’s quality components ensures your customer receives the quality they expect in a new vehicle!


APPAREL

ELECTRIC

FUEL/AIR

LUGGAGE

SECURITY

TOOLS

H20

CHINESEPARTS

ACCESS

CLUTCH

CHEMICAL

CONTROL

PISTONS

BODY

ENGINE

DRIVE

BRAKES

WHEELS

SOUTHERN


part#engineType

engine Size voltage

numberof pins

connectorStyle

color/# of pins

length(in)

Width(in)

height(in) notes

OD080103GW 2 70-125cc 12V DC 4 FEMALEGREEN

(WIDE)3.00

1.50-

1.601.00

Plug has space for 6 Pins but only uses 4outside pins, 2 on each side

OD080107 2 50-125cc 12V AC 5 FEMALEWHITE

(SMALL)2.60 1.50

0.85 or 1.5

to top of plug

Plug has 6 Pin spaces but only uses 5. 2Pins in Outer slots on top and 3 Pins onbottom

OD080107WN 2 50-125cc 12V AC 5 FEMALEWHITE

(NARROW)2.25 1.10

0.85 or 1.5

to top of plug

Plug has 6 Pin spaces but only uses 5. 2Pins in Outer slots on top and 3 Pins onbottom

OD080108 2 50-125cc 12V AC 5 FEMALEGREEN

(TOP)2.60 1.50

0.85 or 1.67

to top of plug

Plug has spaces for 6 pins but uses only 5.2 pins on the top with the center pin spaceempty and the 3 pins on bottom

OD080108GN 2 50-90cc 12V AC 5 FEMALEGREEN

(TOP)2.25 1.00

0.75 or 1.4

to top of plug

Plug has spaces for 6 pins but uses only 5.2 pins on the top with the center pin spaceempty and the 3 pins on bottom

OD080109HP 2 50-125cc 12V AC 5 FEMALEWHITE

(3" WIRE)2.75 1.50 1.00

Includes duplicator circuits, increasedRPM redline and altered ignition curvesAdds 8-10% Horsepower!

OD080110 2,4 50-125cc 12V AC6 (4/2

split)FEMALE

WHITE

(4/2)2.60 1.50

0.85 or 1.5

to top of plugProvides improved acceleration

OD080111 3 50-250cc 12V AC6 (4/2

split)FEMALE

WHITE

(4/2)2.60 1.50

0.90 or 1.70

to top of plug

Improved ignition energy intensity andpowerful acceleration

OD080112HP 3 50-150cc 12V AC6 (4/2

split)FEMALE

WHITE

(5" WIRE)3.50 2.25 1.13

"No rev limit" high performance CDImodule increases acceleration,particularly on hills and steep inclines

OD080115 3200-

500cc12V DC

6 (4/2

split)FEMALE

WHITE

(4/2)3.00 2.00 0.80

Fits most 200-500cc ATVs go-karts,mopeds and scooters

OD080116 3,4150-

250cc12V DC

6 (4/2

split)FEMALE

WHITE

(4/2)2.88 2.75 0.90

Fits selected GY6 250cc water-cooled vehicles and vertical 4-stroke engines

OD080118 3250cc

W/C12V DC

6 (4/2

split)FEMALE

WHITE

(4/2)2.81 1.81 1.00

Plug has 6 Pins used of 7 spaces available,fits Jonway 250-T and other brands

OD080150 4 250cc 12V DC8 (4/4

split)FEMALE

BLACK

(Molded)3.75 2.75 1.00

Fits Lifan 250 Chinese Enginesbolt hole spacing 3.38"

OD080151 4 300cc 12V DC 6 FEMALEBLACK

(Molded)2.75 2.00 1.00

Fits Loncin/Jainshee 300cc ATVs &go-karts; LX 300cc

OD080152 4250-

300cc12V DC

7

(2/2/3

split)

F,M,FWHITE

(2/2/3)2.75

1.75-

2.001.13

Fits Hensim 250 Utility, Yamoto 250 Utility,older TaoTao 300cc engines & other 250-300cc ATVs and dunebuggys;Replaces Baja Part# 250U-555

OD080152B 4 250cc 12V AC7 (4/3

split)FEMALE

WHITE

(4/3)2.75

1.75-

2.001.13 Fits Jainshee 250

OD080153 4 300cc 12V DC 8 FEMALEBLACK

(Molded)3.50 2.75 1.00 FS300 ATV

OD080156 4 400cc 12V DC 5 FEMALEWHITE

(4" WIRE)4.30 3.15 1.25

Has space for 6 pins but uses only 5spaces. Top row has 3 Pins and bottomrow has 2 pins; Fits JS400, Jianshee 400,Odes 400 units & many more

OD080159 4 400cc 12V AC

18

(6/8/4

split)

FEMALE

BLACK

(6/8/4

Molded)

4.25 3.00 0.50 to 1.00Fits many 400cc models with similarmeasurements/specs, including HsunModels, Baja WD400U, Katerra KM400 ATV

replacemenT cdi boXeS

if vehicle iS noT STarTing, haS no Spark, iS miSfiring and/or running rough

- The problem could be The cdi boX! IMAGES&

MOREINFORMATION























DRIVE

APPAREL

ELECTRIC

FUEL/AIR

LUGGAGE

SECURITY

TOOLS

H20

CHINESEPARTS

ACCESS

CLUTCH

CHEMICAL

CONTROL

PISTONS

BODY

ENGINE

BRAKES

WHEELS

magneTo/STaTorS


OD080212

replacemenT magneToS / STaTorS

parT#engineType engine Size voltage

number ofcoils

cenTerhole(mm)

ouTer diameTer

(in)

mounTing#holeS/Spacing

(mm)

numberof

WireS/lengTh

connecTor#/STyle

OD080200 TYPE-2 Fits most 70-125cc kick start dirtbikes 12V 2 + pickup 18 4.5" 2 / 102mm 4 + 2 2 loose MALE,4 loose FEMALE

OD080201 TYPE-2 Fits most 70-125cc electric startdirtbikes 12V 2 + pickup 32 N/A 2 / 70mm 5 + 2 3 loose MALE,

4 loose FEMALE

OD080202 TYPE-2 Fits many 50cc, 90cc, 110cc, 125ccATVs & dirtbikes 12V 4 + pickup 32 3.5" 3 / 42mm 5 + 1 2 loose MALE,

4 loose FEMALE

OD080203 TYPE-2 Fits 50-125cc ATVs & dirtbikes À 12V 6 + pickup 29 3.5" 2 / 42mm 4 + 1 4 in 4-pin MALE,1 loose MALE

OD080204 TYPE-3 Fits many 125-150cc GY6 ATVs& go-karts 12V 6 + pickup 29 3.25" 2 / 42mm 3 + 2/

21"3 in 4-pin MALE,2 loose FEMALE

OD080205 TYPE-3 Fits 50cc GY6 mopeds & scooters 12V 8 + pickup 29 3.5" 2 / 42mm 3 + 2 3 in 3-pin MALE,2 loose FEMALE

OD080206 TYPE-3 Fits many 125-150cc GY6 ATVs& go-karts 12V 8 + pickup 29 3.5" 2 / 42mm 3 + 2 3 in 4-pin MALE,

2 loose FEMALE

OD080207 TYPE-4 Fits 150-250cc Zongshenair/water-cooled engines 12V 8 + pickup 32 3.5" 3 /

42mm/30mm 5 5 loose FEMALE

OD080212 TYPE-3 Fits 250cc CF/CN style GY6 vehicles 12V 18 42 4.0" 5+2 / 53mm 3 + 1/21"

3-in 4-pin MALE,1 loose FEMALE

OD080213 TYPE-2 Fits 50-125cc ATVs & dirtbikes 12V 4 32 3.5" 3+2 / 42mm 4/18" 4 loose FEMALESpade style

À COMPATIBLE WITH 70CC OVERHEAD HORIZONTAL ELECTRIC START ENGINES

A Magneto/Stator is an electrical generator that uses permanent magnets toproduce periodic pulses of alternating current to provide power to the vehicle’selectrical system. In some engine styles, the stator is located in an area wherea derailed chain can damage the stator and/or engine cover requiring replacement. Stators can also fail due to a number of reasons including shorts,water damage, etc. If the vehicle is not generating power, testing the stator isrecommended to determine if it needs replacement.

MORE STATORs&

INFORMATION

OD080201

OD080203

OD080204

OD080205

OD080206

OD080207

OD080200






















APPAREL

ELECTRIC

FUEL/AIR

LUGGAGE

SECURITY

TOOLS

H20

CHINESEPARTS

ACCESS

CLUTCH

CHEMICAL

CONTROL

PISTONS

BODY

ENGINE

DRIVE

BRAKES

WHEELS

SOUTHERN


6 Wire meTal igniTion SWiTch

Ignition switch usually found in 50-300cc ATVs, dirtbikes,scooters and dunebuggys using Type-2 horizontal,Type-3 GY6 and Type-4 vertical 4-stroke engines• Wires: 6 wires; 255mm(10”) length

(Male connector has 9 slots but only uses the outer 3on each side - leaving the center row empty)

• Mounting: 24mm(1”) hole

OD070506

4 Wire plaSTic igniTion SWiTch

WiTh female connecTor

Ignition switch usually found in 50-300cc ATVs, dirtbikes,scooters and dunebuggys using Type-2 horizontal,Type-3 GY6 and Type-4 vertical 4-stroke engines• Sealed ignition switch• Wires: 4 wires; 150mm(6”) length• Connector: Female

OD070505

4 Wire plaSTic igniTion SWiTch

WiTh male connecTor

Commonly used ignition switch usually found in 50-300ccATVs, dirtbikes, scooters and dunebuggys using Type-2horizontal, Type-3 GY6 and Type-4 vertical 4-stroke engines• Sealed ignition switch• Wires: 4 wires; 150mm(6”) length• Connector: Male

OD070507

5 Wire 3 poSiTion igniTion SWiTch

WiTh female connecTor

Fits 50-300cc ATVs, dirtbikes, scooters and dunebuggys using Type-2 horizontal, Type-3 GY6 and Type-4 vertical4-stroke engines• Sealed ignition switch• Wires: 5 wires in 6 pin female connector• Switch height: 61mm(2.4”)• Mounting: 24mm(1”) hole

OD070508


3 Wire - 3 poSiTion

meTal igniTion SWiTch

Commonly used ignition switch usually found in 70-250ccATVs, dirtbikes and go-karts using Type-2 horizontal,Type-3 GY6 and Type-4 vertical 4-stroke enginesSometimes used in CN/CF/CG units as well• Wires: 3 terminals• Switch height: 64mm(2.5”)• Mounting: 24mm(1”) hole

OD070510

2 Wire kill SWiTch - 7/8” handlebarS

• Functions: Run / Off• Fits: 7/8" handlebars• Connector:Female; 2 wires;

635mm(25”) length

OD080600

Single Wire kill SWiTch

• Functions: Push to Kill• Fits: 7/8" handlebars• Wires: 1

OD080650






















DRIVE

APPAREL

ELECTRIC

FUEL/AIR

LUGGAGE

SECURITY

TOOLS

H20

CHINESEPARTS

ACCESS

CLUTCH

CHEMICAL

CONTROL

PISTONS

BODY

ENGINE

BRAKES

WHEELS

elecTrical parTS


4 pin 12v regulaTor/recTifier

Fits ATVs, dirtbikes & go-karts withType-2 50-125cc horizontal 4-stroke engines• Connector: Female; 4 pins• Cooling fin count: 7 (top)• Measures: 67mm x 36mm x 20mm (LxWxH)

OD080401

5 Wire 12v regulaTor/recTifier

Fits ATVs, motorcycles, go-karts and scooterswith Type-3 150-250cc GY6 4-stroke engines• Connector: Female: 5 wires in 6 spaces• Cooling fin count: 9• Measures: 67mm x 59mm x 23mm(LxWxH)• Mounting: 2 bolts @ 55mm spacing

OD080404


Fits mopeds, scooters & go-karts withType-3 150-250cc GY6 4-stroke engines• Connector: Female; 4 pins• Cooling fin count: 8 (top) & 5 (sides)• Measures: 70mm x 51mm x 25mm (LxWxH)

OD080402


Fits scooters with Type-3 50-150cc GY6 4-stroke engines• Connector: Female; 4 pins• Cooling fin count: 9• Measures: 67m x 59mm x 23mm (LxWxH)• Mounting: 2 bolts @ 55mm spacing

OD080408


Fits ATVs, dirtbikes & go-karts withType-3 150-250cc GY6 4-stroke engines• Connector: Male; 4 wires in 6 spaces; 140mm(5.5”) length• Cooling fin count: 9• Measures: 67mm x 59mm x 23mm (LxWxH)• Mounting: 2 bolts @ 55mm spacing

OD080403


Fits ATVs, motorcycles, scooters & go-karts withType-3 150-250cc GY6 4-stroke engines• Connector: Male; 5 wires in 6 spaces• Cooling fin count: 9• Measures: 67mm x 59mm x 23mm (LxWxH)• Mounting: 2 bolts @ 55mm spacing

OD080405






















APPAREL

ELECTRIC

FUEL/AIR

LUGGAGE

SECURITY

TOOLS

H20

CHINESEPARTS

ACCESS

CLUTCH

CHEMICAL

CONTROL

PISTONS

BODY

ENGINE

DRIVE

BRAKES

WHEELS

SOUTHERN



4.75” 7 blade cooling fan

• Housing material: Plastic• Thickness of housing: 32mm(1.25”)• Mounting: 6 bolts (4-inner, 2 outer; not all required)• Wires: 2-wire; 380mm(15”) length• Connector: Female• Voltage: 12 volt

OD1901016” 5 blade cooling fan

• Housing material: Metal• Thickness of housing: 25mm(1”)• Mounting: 4 bolts• Wires: 2-wire; 255mm(10”) length• Connector: Female• Voltage: 12 volt

OD190102

6 Wire 2 plug 12v regulaTor/recTifier

Fits mopeds, scooters & go-karts withType-3 50cc-250cc GY6 4-stroke enginesAlso CF 172mm (250cc) water-cooled engines• Connector #1: Female - 3 wires black, green & red• Connector #2: Male - 3 yellow wires• Cooling fin count: 8

OD080406

univerSal 2-pole 12v STarTer SolenoidWiTh male connecTor

Will work with most Chinese ATVs, motorcycles, and go-kartswith Type-2 50-150cc horizontal engines and selected engines up to 250cc• Connector: Male; 2 wires; 178mm(7”) length

OD080501

univerSal 2-pole 12v STarTer SolenoidWiTh female connecTor

Will work with most Chinese ATVs, motorcycles, and go-kartswith Type-2 50-150cc horizontal engines and select engines up to 250cc• Connector: Female; 2 wires; 178mm length

OD080500

5.5” 7 blade cooling fan

• Housing material: Metal• Thickness of housing: 38mm(1.5”)• Mounting: 2 bolts• Wiring: 2-wire; 280mm(11”) length• Connector: Female• Voltage: 12 volt

OD190100

univerSal 2-pole STarTer SolenoidWiTh fuSe holder & 4-pin connecTor

• Usually used in units with 250cc -700cc engines• 15A fuse installed

OD080502






















DRIVE

APPAREL

ELECTRIC

FUEL/AIR

LUGGAGE

SECURITY

TOOLS

H20

CHINESEPARTS

ACCESS

CLUTCH

CHEMICAL

CONTROL

PISTONS

BODY

ENGINE

BRAKES

WHEELS

STarTer moTorS


9T STarTer - Type-4 125-250cc

‘cg’ STyle verTical air-cooled engine

Fits ATV’s, dirtbikes & go-karts with Type-4 125-250cc‘CG- Overhead Valve’ vertical single cylinder engines• Voltage: 12 volt• Teeth: 9 - 24mm spline length• Terminal connection: single post• Size: 165mm(6.5”) total length end-to-end

102mm(4.0”) main case length67mm(2.6”) diameter

• Mounting: 2 bolts @ 51mm(2”) spacing

OD070102

30mm O.D.18mm depth

10T STarTer - Type-3 50cc gy6 engine

Fits mopeds and scooters with Type-3 50cc GY6 engines• Voltage: 12 volt• Teeth: 10 - 12mm spline length• Terminal connection: single post tab• Size: 115mm(4.35”) total length end-to-end

75mm(3”) main case length47mm(1.85”) diameter

• Mounting: 2 bolts @ 72mm(2.8”) spacing

OD070104

9T STarTer - Type-3 125/150cc gy6

air-cooled engine

Fits ATVs, motorcycles, go-karts & scooters with Type-3 125-150cc GY6 4-stroke engines• Voltage: 12 volt• Teeth: 9 - 19mm spline length• Terminal connection: single post tab• Size: 128mm(5”) total length end-to-end

89mm(3.5”) main case length60mm(2.3”) diameter

• Mounting: 2 bolts @ 76mm(3”) spacing

OD070105

38mm

78.5mm

70mm

12T STarTer - ‘over The engine’

STyle for Type-2 50-125cc engineS

Fits ATV’s, motorcycles and go-karts withType-2 50-125cc horizontal 4-stroke enginesusing an ‘Over the engine upper’ mounted starter • Voltage: 12 volt• Teeth: 12• Length: 145mm(5.75”) total length end-to-end• Mounting: 2 bolts @ 70mm(2.75”) spacing

1 bolt @ 78.5mm(3”) spacing• 16” starter lead wire included

OD070100

30mm O.D.16mm depth

24mm O.D.10.5mm depth

12T STarTer - ‘under The engine’

STyle for Type-2 50-125cc engineS

Fits ATV’s, motorcycles & go-karts withType-2 50-125cc horizontal 4-stroke enginesusing an ‘Under the engine lower’ mounted starter• Voltage: 12 volt• Teeth: 12• Length: 145mm(5.75”) total length end-to-end• Mounting: 2 bolts @ 68mm(2.8”) spacing• 16” Starter lead wire included

OD070101





















139m.SOUTHERNmS.COm / TEL 858-560-5005

APPAREL

ELECTRIC

FUEL/AIR

LUGGAGE

SECURITY

TOOLS

H20

CHINESEPARTS

ACCESS

CLUTCH

CHEMICAL

CONTROL

PISTONS

BODY

ENGINE

DRIVE

BRAKES

WHEELS

SOUTHERN

UPDATED APPLICATIONSwww.outsidedistributing.com


vacuum Fuel Shut-oFF valve For tyPe-3

Gy6 50-150cc 4-Stroke vehicleS

Fits Type-3 50-150cc GY6 4-stroke engineswith automatic vacuum operated petcocks• Fittings: Fuel-in / Fuel-out / Engine vacuum• Fuel line size: 3/16" inner diameter• Mounting: Single 7.5mm hole tab• Measures: 40mm diameter

od040402

vacuum Fuel PumP For tyPe-3 Gy6

150-250cc 4-Stroke vehicleS

Fits Type-3 150-250cc GY6 4-stroke models• Fittings: Fuel-in / Fuel-out / Engine vacuum• Fuel line size: 3/16" inner diameter• Mounting: 7.5mm hole on 2 tabs @ 89mm spacing• Measures: 3” diameter x 1.5” depth (approx)

od040400

vacuum Fuel Shut-oFF valve For

tyPe-3 Gy6 50-150cc 4-Stroke vehicleS

Fits Type-3 50-150cc GY6 4-stroke modelswith automatic vacuum operated petcocks• Fittings: Fuel-in / Fuel-out / Engine vacuum / Vent• Fuel line size: 3/16" inner diameter• Mounting: Single 7.5mm hole tab• Measures: 40mm diameter

od040401

vacuum Fuel Shut-oFF valve For

tyPe-3 Gy6 125-150cc 4-Stroke vehicleS

Fits Type-3 125-150cc GY6 4-stroke engineswith automatic vacuum operated petcocks• Fittings: Fuel-out / Engine vacuum• Fuel line size: 3/16" inner diameter• Mounting: 14.5mm inner diameter

threaded nut

od040403

Fuel Petcock/Shut-oFF valve

High-quality metal fuel shut-off valve includes a built-infuel filter system ensuring debris does not flow from thetank to the carburetor• Functions: Off / On / Reserve• Fuel line size: 3/16" inner diameter• Mounting: 2 6mm bolts @ 35mm spacing• Includes Valve and gaskets

od040301

Fuel PumPS

Fuel Shut-oFF valveS

Fuel Petcock/Shut-oFF valve

High-quality metal fuel shut-off valve includes a built-infuel filter ensuring debris does not flow from the tankto the carburetor & a clear plastic sediment bowl• Functions: Off / On / Reserve• Fuel line size: 3/16" inner diameter• Mounting: 13mm inner diameter threads• Measures: 130mm length of valve end to end

75mm(3”) length of filter tube

od040300

inline Fuel Petcock/Shut-oFF valve

High-quality metal shut-off valve commonly found onATVs, dirtbikes, generators, scooters & quadsFuel filter highly recommended• Functions: Off / On• Fuel line size: 3/16" inner diameter• Mounting: Single 7.5mm hole tab

od040302






















15mm maniFolD 43-47cc X-Style enGineS

Fits Type-1 43/47/49cc X-style and ‘GS Moon’ enginesCommonly found on Pocketbikes, scooters and quads• Engine side diameter: N/A• Carburetor side diameter: 15mm• Vacuum ports: Vacuum hole at top• Mounting: 2 bolts to engine / 2 bolts to carburetor• Measures: 54mm(2.1”) x 40mm(1.6”) x 30mm(1.2”)

(LxWxH)• Includes: Manifold and gasket

od050216

15mm maniFolD 47/49cc mt-a1 enGineS

Fits Type-1 47/49cc MT-A1 air-cooled 2-stroke enginesCommonly found on ATVs and dirtbikes• Engine side diameter: N/A• Carburetor side diameter: 15mm• Vacuum ports: None• Mounting: 4 bolts to engine / 2 bolts to carburetor• Includes: Manifold and gasket• Uses carburetor OD030001

od050215

DRIVE

APPAREL

ELECTRIC

FUEL/AIR

LUGGAGE

SECURITY

TOOLS

H20

CHINESEPARTS

ACCESS

CLUTCH

CHEMICAL

CONTROL

PISTONS

BODY

ENGINE

BRAKES

WHEELS

intake maniFolDS

140 ORDERS.SOUTHERNmS.COm / FAX 858-560-4626 SOUTHERNRefer to BRAND web-site for M.A.P. policy

18mm maniFolD tyPe-3 50cc enGineS

With SinGle vacuum tube

Fits Type-3 50cc GY6 4-stroke engines• Engine side diameter: 18mm• Carburetor side diameter: 27mm• Vacuum ports: 1 (3/16” diameter)• Mounting: 2 bolts @ 46mm(1.8”) spacing• Measures: 68mm(2.7”) length• Includes: Manifold, o-ring and clamp

od050217

18mm maniFolD tyPe-3 50cc enGineS

With Double vacuum tubeS

Fits Type-3 50cc GY6 4-stroke engines• Engine side diameter: 18mm• Carburetor side diameter: 27mm• Vacuum ports: 2 - 3/16” diameter (1on top/1 on bottom)• Mounting: 2 bolts @ 46mm(1.8”) spacing• Measures: 68mm(2.7”) length• Includes: Manifold, o-ring and clamp

od050217d

NOTE: When suffering from a lack ofperformance, check for a crackedisolator ring or torn carb gasketIf damaged, the isolator and/or gasketshould be replaced

SiZeiSolatorrinG Part#

16MM od050601

17MM od050602

19MM od050604

23MM od050608

26MM od050611

27MM od050612

30MM od050614

SiZe GaSket Part#

16MM od05050416

19MM od05050419

26MM od05050426

30MM od05050430

32MM od05050432

iSolator rinGS/maniFolD SPacerS

anD carburetor GaSketS

• Isolator rings are found between carburetor andintake manifold on many units

• Cracked isolator ring or torn carburetor gasket can causeair leaks, leading to piston seizure or engine damage

• 19mm carburetors require 19mm isolatorelectric chokeS For tyPe-3 Gy6

4-Stroke vehicleS

moDel SiZe PluG/Wire tyPeneeDle lenGth/Diameter Part#

50cc2 WIRE PLUG/

20" LoNG9mm/20.5mm od030200

125/250cc2 WIRE PLUG/

30" LoNG8.5mm/20mm od030201

250cc3 WIRE PLUG/

9" LoNG9.5mm/20mm od030202

od030201

od030202

od030200






















APPAREL

ELECTRIC

FUEL/AIR

LUGGAGE

SECURITY

TOOLS

H20

CHINESEPARTS

ACCESS

CLUTCH

CHEMICAL

CONTROL

PISTONS

BODY

ENGINE

DRIVE

BRAKES

WHEELS

SOUTHERN



22mm maniFolD tyPe-3 125-150cc Gy6

enGineS With Double vacuum tube

Fits Type-3 125-150cc GY6 4-stroke engines• Engine side diameter: 22mm• Carburetor side diameter: 30mm• Vacuum ports: 2 - 3/16 diameter (1on top/1 on bottom)• Mounting: 2 bolts @ 45mm(1.75”) spacing• Measures: 68mm(2.7”) length• Includes: Manifold, o-ring and clamp

od050218d

22mm maniFolD tyPe-3 125-150cc Gy6

enGineS With SinGle vacuum tube

Fits Type-3 125-150cc GY6 4-stroke engines• Engine side diameter: 22mm• Carburetor side diameter: 30mm• Vacuum ports: 1 (3/16” diameter)• Mounting: 2 bolts @ 45mm(1.75”) spacing• Measures: 68mm(2.7”) length• Includes: Manifold o-ring and clamp

od050218

27mm maniFolD tyPe-3 250cc Gy6

cF enGineS With SinGle vacuum tube

Fits Type-3 250cc GY6 CF 4-stroke engines• Engine side diameter: 27mm• Carburetor side diameter: 34mm• Vacuum ports: 1 - 3/16” diameter hose• Mounting: 2 bolts @ 57mm(2.25”) spacing• Includes: Manifold and clamp

od050219

30mm maniFolD tyPe-4 vertical enGineS

Fits Type-4 vertical 4-stroke engines• Engine side diameter: 30mm• Carburetor side diameter: 30mm• Vacuum ports: None• Mounting: 2 bolts @ 64mm(2.5”) spacing

Stud spacing: 50mm(2”)center to center

od050213

velocity Stack With hanD choke

For 47/49cc mt-a1 2 Stroke enGine

Fits Type- 47/49cc MT-A1 air cooled 2-stroke engineswith 13mm intake venturi opening• Gasket required (OD020502)

Not included

od050300






















30mm PZ carburetor For tyPe-4

200-250cc vertical 4-Stroke enGineS

Fits vehicles with Type-4 200-250cc vertical 4-stroke engines• Engine side diameter: 30mm• Intake side diameter: 42mm• Rectangular float bowl• Mounting: 2 bolts @ 48mm spacing

haNd oPERatEd chokE od030021hc

cabLE oPERatEd chokE od030021cc

od030021ccod030021hc

26mm carburetor For 125-150cc

tyPe-2 & tyPe-4 4-Stroke enGineS

Fits Type-2 125-150cc horizontal 4-stroke enginesand Type-4 125-150cc vertical 4-stroke engines• Engine side diameter: 26mm (may vary slightly)• Intake side diameter: 35mm• Rectangular float bowl• Mounting: 2 bolts @ 49mm spacing

haNd oPERatEd chokE od030016

cabLE chokE od030016cc

DRIVE

APPAREL

ELECTRIC

FUEL/AIR

LUGGAGE

SECURITY

TOOLS

H20

CHINESEPARTS

ACCESS

CLUTCH

CHEMICAL

CONTROL

PISTONS

BODY

ENGINE

BRAKES

WHEELS

carburetorS


Note: Carburetors use2 sizes of fuel line:1) 3/32” ID, 3/16” OD2) 1/8” ID, 1/4” OD

19mm rePlacement carburetor For

tyPe-3 50cc Gy6 4-Stroke enGineS

Stock OEM replacement 19mm carburetor for Type-3 50cc GY6 4-stroke vehicles• Engine side diameter: 19mm• Intake side diameter: 39mm• Choke: Electric choke with 2 wire female connector• Mounting: Spigot style - 28mm O.D.

od030024

carburetorS For tyPe-1

X-Style 2-Stroke enGineS

Fits Type-1 X-style 2-stroke enginesusing a carburetor with single primer bulb• Measures: 2.75" (H) approx (excluding primer bulb)• Choke: None - primer bulb• Mounting: 2 bolts @ 31mm spacing• Includes: Carburetor and gasket• Works with T1 throttle cable

FitS tyPe-1 33/36cc X-Style enGineS

10.5MM od03000210

FitS tyPe-1 43/49cc X-Style enGineS

13MM od03000213

15MM od03000215





















16mm carburetor For tyPe-2 50-125cc

horiZontal 4-Stroke enGineS

Fits 50-125cc ATVs and 50-110cc dirtbikes and pitbikeswith Type-2 horizontal engines• Engine side diameter: Tapered venturi-15mm I.D.,18mm O.D.• Intake side diameter: 35mm• Rectangular float bowl• Choke: Hand operated choke• Mounting: 2 bolts @ 48mm spacing

od030004


APPAREL

ELECTRIC

FUEL/AIR

LUGGAGE

SECURITY

TOOLS

H20

CHINESEPARTS

ACCESS

CLUTCH

CHEMICAL

CONTROL

PISTONS

BODY

ENGINE

DRIVE

BRAKES

WHEELS

SOUTHERN


Note: If carburetor hasa round float bowl onthe bottom and meas-ures 19mm at the en-gine side then part#OD030008 is required.

19mm carburetor For tyPe-2 50-125cc

horiZontal 4-Stroke enGineS

Fits Type-2 50-125cc horizontal 4-stroke enginescommon in ATVs, dirtbikes & small dunebuggys• OEM replacement carburetor• Engine side diameter: 19mm• Intake side diameter: 35mm• Round float bowl• Choke: Hand operated choke• Mounting: 2 bolts @ 48mm spacing

od030008


Note: If carburetor has arectangular float bowl onthe bottom and measures16mm at the engine sidethen part# OD030004 isrequired.

13mm oem rePlacement carburetor

tyPe-1 47/49cc mt-a1 2-Stroke enGineS

Fits Pocketbikes, Pocketquads and scooterswith Type-1 47/49cc MT-A1 air-cooled 2-stroke engines• Engine side diameter: 13mm• Intake side diameter: 37mm• Choke: Hand operated• Mounting: 2 bolts @ 40mm spacing• Includes: Carburetor and gasket• Integrated fuel shut-off

od030001

24mm rePlacement carburetor For

tyPe-3 125-150cc Gy6 4-Stroke enGineS

Stock OEM replacement 24mm carburetorfor Type-3 125-150cc GY6 4-stroke vehicles• Engine side diameter: 24mm• Intake side diameter: 42mm• Choke: Electric choke with 2 wire female connector• Mounting: Spigot style - 32mm O.D.

od030026






















DRIVE

APPAREL

ELECTRIC

FUEL/AIR

LUGGAGE

SECURITY

TOOLS

H20

CHINESEPARTS

ACCESS

CLUTCH

CHEMICAL

CONTROL

PISTONS

BODY

ENGINE

BRAKES

WHEELS

air FilterS


od060402

Part#(F) FlanGe inSiDe

Diameter(b) baSe

Diameter(h)

heiGht(h1) total

heiGht(t) toP

Diameter aPPlication tyPe

od060402 35mm 61mm 32mm 51mm 51mm 4-StRokE WIRE MESh, ShoRt coNE

od060403 35mm 74mm 34mm 51mm 74mm 4-StRokE WIRE MESh, RoUNd

od060405 35mm 74mm 63mm 84mm 51mm 4-StRokE WIRE MESh, LoNG coNE

od060406 35mm 61mm 49mm 89mm 51mm 4-StRokE WIRE MESh, 90° bENd

od060407 38mm 74mm 61mm 76mm 51mm 2 & 4-StRokES WIRE MESh, LoNG coNE

od060417 38mm 89mm 80mm 89mm 89mm 4-StRokE bLack FoaM FILtER

od060417R 38mm 89mm 80mm 89mm 89mm 4-StRokE REd FoaM FILtER

od060404 À 42/44mm 74mm 34mm 51mm 51mm 2-StRokE WIRE MESh, ShoRt coNE

od060409 42mm 74mm 61mm 76mm 74mm 4-StRokE WIRE MESh, RoUNd

od060432 42mm 73mm 32mm 51mm 51mm 2 & 4-StRokES WIRE MESh, ShoRt coNE



od060440 44mm 61mm 36mm 51mm 51mm 2 & 4-StRokES WIRE MESh, ShoRt coNE

od060430 Á 45mm 74mm 32mm 51mm 74mm 2-StRokE WIRE MESh, RoUNd

od060431 Â 45mm 74mm 32mm 51mm 74mm 2 & 4-StRokES WIRE MESh, RoUNd


od060412 52mm 74mm 61mm 80mm 51mm 4-StRokE WIRE MESh, LoNG coNE


À Includes carb adapter

Á high Performance kit includes air filter, velocity stack and choke

Â air Filter only for od060430 kit

mORE AIR FILTERS& APPLICATIONS

od060406

od060407

od060412

od060430

od060420od060417

od060403

od060417R

od060405





















145M.SOUTHERNMS.COM / TEL 858-560-5005

APPAREL

ELECTRIC

FUEL/AIR

LUGGAGE

SECURITY

TOOLS

H20

CHINESEPARTS

ACCESS

CLUTCH

CHEMICAL

CONTROL

PISTONS

BODY

ENGINE

DRIVE

BRAKES

WHEELS

SOUTHERN



OIL DIPSTICK

OEM plastic replacement engine oil dip stick• Fits Type-2 50-125cc

horizontal 4-stroke engines• Dipstick uses a standard thread size• Length: 3” approx

OD020100

MORE OILDIPSTICKS

OIL fILTER SCREEN

Quality replacement engine oil filter screen• Fits Type-3 50-150cc GY6 4-stroke engines• Measures: 28.5mm length

18mm screen diameter26mm top ouside diameter

• Engine Codes: QMI152/ QMI157/ QMJ152/ QMJ157

OD020110

MOREGASKET KITS

STATOR CAP

OEM replacement stator cap forType-2 50-150cc horizontal 4-stroke engines• Prevent water and dust damage to your stator• Fits on side of stator casing• Outside diameter: 37mm (1.5”)• Thread diameter: 29mm• Includes: Cap and o-ring

OD020301

ENGINE GASKET KITS

OIL DIPSTICK fOR GY6 ENGINES

OEM plastic replacement engine oil dip stick• Fits Type-3 50-150cc GY6 4-stroke engines• Dipstick uses a standard thread size• Length: 4.25” approx

OD020101

ENGINE TYPE PART NUMBER NOTES

Type-2 50cc Horiziontal 4-Stroke Top-end Gasket Kit OD050511K 40mm bore w/ 8 o-ringsType-2 70/90cc Horiziontal 4-Stroke Top-end Gasket Kit OD050512K 48mm bore w/ 7 o-ringsType-2 110cc Horiziontal 4-Stroke Top-end Gasket Kit OD050514K 54mm bore w/ 7 o-ringsType-2 125cc Horiziontal 4-Stroke Top-end Gasket Kit OD050515K 54mm bore w/ 8 o-ringsType-2 50cc Horiziontal 4-Stroke Complete Engine Gasket Kit OD050517 40mm bore w/ 8 o-ringsType-2 70/90cc Horiziontal 4-Stroke Complete Engine Gasket Kit OD050520 48mm bore w/ 7 o-ringsType-2 110cc Horiziontal 4-Stroke Complete Engine Gasket Kit OD050521 54mm bore w/ 7 o-ringsType-2 125cc Horiziontal 4-Stroke Complete Engine Gasket Kit OD050522 Honda styleType-3 50cc GY6 4-Stroke Complete Engine Gasket Kit OD050523 Fits 139QMB Short Case Version EnginesType-3 50cc GY6 4-Stroke Complete Engine Gasket Kit OD050524 Fits 139QMB Long Case Version EnginesType-3 125cc GY6 4-Stroke Complete Engine Gasket Kit OD050525 Fits 152QMI Short Case Version EnginesType-3 150cc GY6 4-Stroke Complete Engine Gasket Kit OD050527 Fits 157QMJ Short Case Version EnginesType-3 150cc GY6 4-Stroke Complete Engine Gasket Kit OD050528 Fits 157QMJ Long Case Version EnginesGeneral Purpose Engine 4-Stroke Cylinder Gasket OD050552 Fits 13hp, TechPak engineType-1 47-49cc MT-A1 2-Stroke Exhaust Gasket OD050801 Measures 2.25" x 1.25"Type-3 125-150cc GY6 4-Stroke Exhaust Gasket OD050802 Fits 152QMI, 152QMJ, 157QMI, 157QMJ EnginesType-2 50-125cc Horiziontal 4-Stroke Exhaust Gasket OD050803 Fits All engines





















DRIVE

APPAREL

ELECTRIC

FUEL/AIR

LUGGAGE

SECURITY

TOOLS

H20

CHINESEPARTS

ACCESS

CLUTCH

CHEMICAL

CONTROL

PISTONS

BODY

ENGINE

BRAKES

WHEELS

RECOIL STARTERS

146 ORDERS.SOUTHERNMS.COM / FAX 858-560-4626 SOUTHERNRefer to BRAND web-site for M.A.P. policy

TYPE-1 - 22-26cc x-STYLE RECOIL STARTER

Fits Type-1 22-26cc ‘X-style’ 2-stroke enginesfound in over 90% of Chinese off road units and scooters• Cogs/teeth: Center has 2 arms and is white in color• Mounting: 4 bolts• Measures: 3.50"x2.75"x1.2"

(LxWxH approx)• Includes: Recoil starter only

OD070310

TYPE-1 47/49cc MT-A1 RECOIL STARTER

Fits Type-1 47/49cc MT-A1 air-cooled 2-stroke enginesfound in most 2-stroke Pocketbikes and Pocketquads• Most commonly used recoil/pull-starter• Cogs/teeth: 4-tooth helix• Mounting: 3 bolts• Measures: 7.25" (end-to-end approx length)• Includes: Recoil starter only

OD070300 (BLACK PLASTIC CASING)

OD070300a (SILVER ALLOY CASING)

RECOIL STARTER fOR GENERAL PURPOSE

4-STROKE ENGINES (METAL CASING)

Fits many general purpose 4-stroke enginescommon in various go-karts• Cogs/teeth: Metal claw with 2 tab engagement• Mounting: 6 bolts• Measures: 7" diameter• Includes: Recoil starter only• Available in Black or Red

Black starter OD070312

reD starter OD070312r






















APPAREL

ELECTRIC

FUEL/AIR

LUGGAGE

SECURITY

TOOLS

H20

CHINESEPARTS

ACCESS

CLUTCH

CHEMICAL

CONTROL

PISTONS

BODY

ENGINE

DRIVE

BRAKES

WHEELS

SOUTHERN



TYPE-1 - 33/36/43/49cc RECOIL STARTER

Fits Type-1 33/36/43/49cc ‘X-style’ 2-stroke engines• Cogs/teeth: Center has 2 arms and is white in color• Mounting: 4 bolts @ 67mm spacing

Diagonal spacing = 95mm• Measures: 3.25"x3.25"x1.25" approx• Includes: Recoil starter only

OD070306

TYPE-1 33/36/43/49cc RECOIL STARTER

(GS MOON)

Fits Type 1 33/36/43/49cc ‘X-style’ 2-stroke engines foundon vehicles produced by GS-Moon Company, from 2000 up• Fits “GS Moon” style units and many others• Cogs/teeth: 2-tooth cog• Mounting: 4 bolts• Measures: 3.25"x3.25"x1.4" approx (LxWxH)• Includes: Recoil starter only

OD070304

NOTE: Inspect pictures to confirm starter claw/cog teeth are same pattern as old part

TYPE-1 - 33/36/43/49cc x-STYLE

STARTER CLAw ASSEMBLY

Fits various Type-1 33/36/43/49cc ‘X-style’ 2-stroke engines• Mounting: center • Measures: 2.5"x1.75"x0.5" (WxHxD approx)• Includes: Claw assembly only

OD070314

NOTE: Will NOT fit Type-1 47/49cc MT-A1 air-cooled motors

TYPE-1 - 33/36/43/49cc RECOIL STARTER

Fits Type-1 33/36/43/49cc ‘X-style’ 2-stroke enginesfound in various Chinese small engine scooters/vehicles• Cogs/teeth: 2-tooth cog/helix• Mounting: 4 bolts• Measures: 3.25"x3.25"x1.4" approx (LxWxH)• Includes: Recoil starter only

OD070305

NOTE: Inspect pictures to confirm starter claw/cog teeth are same pattern as old part






















hIGh PERfORMANCE 3-PAD CLUTCh

wITh KEYwAY

Fits Type-1 47/49cc MT-A4 water-cooled 2-stroke engines• Mounting hole: 10mm diameter• Tapered: No - straight• Keyway: Yes• Arm/pad count: 3• Spring count: 3 heavy duty springs• Measures: 3” outside diameter

OD110103HP

hIGh PERfORMANCE 2-PAD ADjUSTABLE

CLUTCh wITh KEYwAY

Fits Type-1 47/49cc MT-A4 water-cooled 2-stroke enginesHas adjustable RPM clutch engagement levels• Mounting hole: 10mm diameter• Tapered: No - straight• Keyway: Yes• Arm/pad count: 2 (adjustable)• Spring count: 2 heavy duty springs• Measures: 3” outside diameter

OD110104HP

DRIVE

APPAREL

ELECTRIC

FUEL/AIR

LUGGAGE

SECURITY

TOOLS

H20

CHINESEPARTS

ACCESS

CLUTCH

CHEMICAL

CONTROL

PISTONS

BODY

ENGINE

BRAKES

WHEELS

CLUTCh ASSEMBLIES


hIGh PERfORMANCE 2-PAD CLUTCh ASSY

Fits various Type-1 33/36/43/49cc ‘X-style’ 2-stroke units• Mounting hole: 2 10mm holes• Arm/pad count: 2 high performance pads• Spring count: 1 heavy duty spring• Measures: 3” outside diameter

OD110106HP

STANDARD 2-PAD CLUTCh ASSEMBLY

Fits various Type-1 33/36/43/49cc ‘X-style’ 2-stroke units• Mounting hole: 2 10mm holes• Arm/pad count: 2• Spring count: 1• Measures: 3” outside diameter

OD110106

NOTE: Will NOT fit the Type-1 MT-A147/49cc air-cooled 2-stroke engines.

TYPE-1 - x STYLE

TYPE-1 - MT-A4

NOTE: Will NOT fit the Type-1 MT-A147/49cc air-cooled 2-stroke engines.






















APPAREL

ELECTRIC

FUEL/AIR

LUGGAGE

SECURITY

TOOLS

H20

CHINESEPARTS

ACCESS

CLUTCH

CHEMICAL

CONTROL

PISTONS

BODY

ENGINE

DRIVE

BRAKES

WHEELS

SOUTHERN



hIGh PERfORMANCE 2-PAD ADjUSTABLE

CLUTCh wIThOUT KEYwAY

Fits Pocketbikes and Pocketquads with Type-1 47/49ccMT-A1 air-cooled 2-stroke enginesHas adjustable RPM clutch engagement levels• Mounting hole: 12mm diameter• Tapered: Yes• Keyway: No• Arm/pad count: 2 (adjustable)• Spring count: 2 heavy duty springs• Measures: 3” outside diameter

OD110105HP

3-PAD CLUTCh wIThOUT KEYwAY

Fits Pocketbikes and Pocketquads with Type-1 47/49ccMT-A1 air-cooled 2-stroke engines• Mounting hole: 12mm diameter• Tapered: Yes• Keyway: No• Arm/pad count: 3• Spring count: 3• Measures: 3” outside diameter

OD110101

CLUTCh BELL hOUSING ONLY

Fits Type-1 47/49cc MT-A1 air-cooled 2-stroke engineswith 3" (78mm) diameter clutches• 6 tooth drive sprocket for #25 chain• Mounting: 4 bolts• Includes: Bell housing only - NO cover cap

OD100320

TYPE-1 - MT-A1

NOTE: Clutch can be usedinstead of OD110101 for a stronger, higher performance clutch

3-PAD CLUTCh wITh KEYwAY

Fits Type-1 47/49cc MT-A1 air-cooled 2-stroke enginesfound in Pocketbikes and Pocketquads• Mounting hole: 12mm diameter• Tapered: Yes• Keyway: Yes• Arm/pad count: 3• Spring count: 3• Measures: 3” outside diameter

OD110100

CLUTCh BELL

hOUSING AND CAP

Fits Type-1 47/49cc MT-A1 air-cooled 2-stroke engineswith 3" (78mm) diameter clutches• 6 tooth drive sprocket for #25 chain• Mounting: 4 bolts

Bell HOusing & Bearing cOver caP OD100318

Bearing cOver caP Only OD100319






















DRIVE

APPAREL

ELECTRIC

FUEL/AIR

LUGGAGE

SECURITY

TOOLS

H20

CHINESEPARTS

ACCESS

CLUTCH

CHEMICAL

CONTROL

PISTONS

BODY

ENGINE

BRAKES

WHEELS

CLUTCh ASSEMBLIES


6 SPLINE 18 TOOTh SEMI-AUTOMATIC

CLUTCh wITh REVERSE

Fits many vehicles with Type-2 50-125cchorizontal 4-stroke engines• Clutch type: Semi-automatic, with reverse• Spline count: 6• Tooth count: 18• Clutch plates/ springs: 2/4• Measures: 4.5” diameter x 1.5” height approx• Bolthole spacing: 56mm x 56mm

OD110108

TYPE-2 ENGINES

3-PAD 6 SPLINE 17 TOOTh

AUTOMATIC CLUTChFits many ATVs, motorcycles, go-karts and dunebuggyswith Type-2 50-110cc horizontal 4-stroke engines• Clutch type: Automatic• Spline count: 6/24 teeth• Tooth count: 17 on cover• Clutch arms/ springs: 3/3• Measures: 4.00” diameter

1.25” height approx4.25” diameter of clutch cover

OD110134

Note: Part Numbers OD110107, OD110108 andOD110109 look very similar. When looking at oldclutch - take notice of the top of the clutch on thespring side as they have subtle differences in design.Also note the tooth count as some are different.

6 SPLINE 18 TOOTh MANUAL CLUTCh

wITh REVERSE

4 Speed with reverse clutch fits Type-2 50-125cchorizontal 4-stroke engines• Clutch type: Manual with reverse• Spline count: 6• Tooth count: 18• Clutch plates/ springs: 2/4• Measures: 4.5” diameter x 1.5” height approx• Bolthole spacing: 56mm x 56mm

OD110109

17 TEETh

18 TEETh

18 TEETh

6 SPLINE 17 TOOTh SEMI-AUTOMATIC

CLUTCh wITh REVERSE

Fits ATVs with Type-2 50-125cc horizontal 4-stroke engines• Clutch type: Semi-automatic, with reverse• Spline count: 6• Tooth count: 17• Clutch plates/ springs: 2/4• Measures: 4.5” diameter x 1.5” height approx• Bolthole spacing: 56mm x 56mm

OD110107





















5 PLATE 4 SPRING MANUAL CLUTCh

Fits many ATVs, go-karts and dunebuggyswith Type-4 125-200cc vertical air-cooled 4-stroke engines• Clutch type: 5-speed manual• Spline count: 6• Tooth count: 73 outside gear• Friction plates/ springs: 5/4• Measures: 5.00” diameter

2.25” height approx• Basket information: 8 basket walls

OD110132

6 PLATE 6 SPRING MANUAL CLUTCh

Fits many ATVs, motorcycles, go-karts and dunebuggyswith Type-4 200cc vertical air-cooled 4-stroke engines• Clutch type: Manual• Spline count: 6• Tooth count: 73 outside gear• Friction plates/ springs: 6/6• Measures: 5.10” gear diameter

4.75” basket diameter2.5” height approx

• Basket information: 8 basket walls

OD110133


APPAREL

ELECTRIC

FUEL/AIR

LUGGAGE

SECURITY

TOOLS

H20

CHINESEPARTS

ACCESS

CLUTCH

CHEMICAL

CONTROL

PISTONS

BODY

ENGINE

DRIVE

BRAKES

WHEELS

SOUTHERN



Note: clutch platesnot sold separately

TYPE-3 ENGINES

TYPE-4 ENGINES

6 ROLLER AUTOMATIC GY6 CLUTCh

Known to fit many ATVs, motorcycles, go-karts, dunebuggysand scooters with Type-3 50-150cc GY6 air-cooled engines• Clutch type: Automatic• Sleeve/Bushing: 15.0mm inner diameter

24.0mm outer diameter• Roller count: 6• Roller weight: 14 grams• Measures: 4.50” diameter approx

OD110135

3-PAD CLUTCh fOR 50CC GY6 ENGINES

Fits Type-3 50cc GY6 air-cooled 4-stroke engines• Arm count: 3• Spring count: 3• Measures: 4” diameter x 1” height approx

OD110110

Note: clutch platesnot sold separately






















DRIVE

APPAREL

ELECTRIC

FUEL/AIR

LUGGAGE

SECURITY

TOOLS

H20

CHINESEPARTS

ACCESS

CLUTCH

CHEMICAL

CONTROL

PISTONS

BODY

ENGINE

BRAKES

WHEELS

cables

152 ORDERS.SOuThERnmS.COm / FAX 858-560-4626 SOUTHERNRefer to BRAND web-site for M.A.P. policy

B-1 STYLE CABLE

B-2 STYLE CABLE

C-2 STYLE CABLE

C-1 STYLE CABLE

T-2 STYLE CABLET-1 STYLE CABLE

T-3 STYLE CABLE T-4 STYLE CABLE





















153m.SOuThERnmS.COm / TEL 858-560-5005

APPAREL

ELECTRIC

FUEL/AIR

LUGGAGE

SECURITY

TOOLS

H20

CHINESEPARTS

ACCESS

CLUTCH

CHEMICAL

CONTROL

PISTONS

BODY

ENGINE

DRIVE

BRAKES

WHEELS

SOUTHERN

uPDATED APPLICATIOnSwww.outsidedistributing.com

bRaKe cables clUTcH cables THROTTle cables

PaRT# cable TYPe IN-lINe aDJUsTeROUTeR sleeVe

leNGTH (INcHes)FRee cable leNGTH

(INcHes)TOTal leNGTH

(INcHes)PRODUcT

INFO VIDeOs

ODB1375 B-1 YES 37.5 3.5 41.0

ODB1440 B-1 YES 44.0 4.0 48.0

ODB2200 B-2 NO 20.0 6.0 26.0

ODB2275 B-2 NO 27.5 6.5 34.0

ODB2335 B-2 NO 33.5 5.5 39.0

ODB2395 B-2 NO 39.5 6.5 46.0

ODC1330 C-1 NO 33.0 2.5 35.5

ODC1360 C-1 NO 36.0 2.5-3 40.0

ODC1370 C-1 NO 38.0 3.0 41.0

ODC1520 C-1 NO 52.0 5.0 57.0

ODC2280 C-2 YES 28.0 3.0 31.0

ODC2330 C-2 YES 33.0 2.5 35.5

ODC2360 C-2 YES 36.0 3.0 39.0

ODT1235 T-1 NO 23.5 4.0 27.5

ODT1275 T-1 YES 27.5 4.5 32.0

ODT1695 T-1 YES 69.5 4.5 74.0

ODT2210 T-2 YES 21.0 4.0 25.0

ODT2220 T-2 YES 22.0 4.0 26.0

ODT2235 T-2 YES 23.5 4.0 27.5

ODT2255 T-2 YES 25.5 4.0 29.5

ODT2270 T-2 YES 27.0 4.0 31.0

ODT2280 T-2 YES 28.0 4.0 32.0

ODT2300 T-2 YES 30.0 4.0 34.0

ODT2310 T-2 YES 31.0 3.0 34.0

ODT2320 T-2 YES 32.0 4.0 36.0

ODT23325 T-2 YES 33.3 4.0 37.3

ODT23425 T-2 YES 34.3 4.0 38.3

ODT2355 T-2 YES 33.3 4.0 37.3

ODT2370 T-2 YES 37.0 4.0 41.0

ODT2400 T-2 YES 40.0 4.0 44.0

ODT2430 T-2 YES 43.0 4.0 47.0

ODT2635 T-2 YES 63.5 4.0 67.5

ODT2655 T-2 YES 63.5 4.0 67.5

ODT2665 T-2 YES 66.5 4.0 70.5

ODT3285 T-3 YES 28.5 3.0 31.5

ODT3270 T-3 YES 27.0 3.0 30.0

ODT3310 T-3 YES 31.0 3.0 34.0

ODT3440 T-3 YES 44.0 3.0 47.0

ODT43375 T-4 NO 33.8 4.0 37.8

ODT4355 T-4 NO 35.5 5.0 40.5

ODT43775 T-4 NO 37.8 6.0 42.8

ODT4395 T-4 NO 39.5 5.0 44.5

ODT4305 T-4 NO 30.5 5.0 35.5

ODT4315 T-4 NO 31.5 6.0 37.5

ODT4330 T-4 NO 33.0 6.0 39.0

ODT4350 T-4 NO 35.0 6.0 41.0

ODT4370 T-4 NO 37.0 6.0 42.0























all eNGINe TYPes

cHaIN TeNsIONeR aDJUsTeR bOlTs

• 3.0" length approx. with 0.5" eyehole and 6mm thread• Sold 2 per pack

OD162000

FRONT sPINDle bRacKeTs

Fits many ATVs with 50-125cc 4-stroke engines• Eyehole sleeve diameter: 10mm• Spindle mounting: 11mm hole diameter• Measures: 1.9" x 1.9" (LxW)

OD160713DRIVE

APPAREL

ELECTRIC

FUEL/AIR

LUGGAGE

SECURITY

TOOLS

H20

CHINESEPARTS

ACCESS

CLUTCH

CHEMICAL

CONTROL

PISTONS

BODY

ENGINE

BRAKES

WHEELS

cHINese PaRTs


7/8” HaNDlebaR clamP PacK

• Fits most Pocketbikes and Pocketquads• Includes: 2 bottom mounts & 2 top mounts• Measures: 1 7/8" L x 7/8” W

OD120400

HaNDle baR RIseR seT

• Fits standard 7/8” handlebars• Compatible with many 4-stroke model ATVs• Measures: 2.0”x3/4"x 3/4" approx (LxWxH)

1.5" total height when put together• Bolthole spacing: 35mm

OD120404

UNIVeRsal HYDRaUlIc leVeR

Approximately 6.5” longLEfT SiDE OD120500L

RighT SiDE OD120500R

DUal cable bRaKe leVeR

Fits ATVs with 50-125cc 4-stroke engines using a dual cablesystem with drum brakesRighT SiDE OD120501R

HYDRaUlIc masTeR cYlINDeR wITH leVeR

• Master cylinder assembly with lever• Hydraulic fluid level sight window• Right master cylinder includes front brake switch

LEfT SiDE OD130100L

RighT SiDE OD130101R

OD130101R

OD130100L

FUel TaNK caP

Plastic replacement gas cap commonly found on 2-strokePocketbikes, Pocketquads, dirtbikes and scooters• Measures: 2.0" outer diameter

1.25" inner diameter @ threads

OD040501

FUel TaNK caP

Plastic cap fits 50-125cc ATVs and motorcyclesFuel tank vent hose sold separately• Measures: 2.5" outer diameter

1.75" inner diameter @ threads

OD040500

FUel TaNK caP

Plastic gas cap commonly found on many ATVs & dirtbikesFuel tank vent hose sold separately• Measures: 3.5" outer diameter

1 7/8" inner diameter @ threads• Standard thread size

OD040502






















APPAREL

ELECTRIC

FUEL/AIR

LUGGAGE

SECURITY

TOOLS

H20

CHINESEPARTS

ACCESS

CLUTCH

CHEMICAL

CONTROL

PISTONS

BODY

ENGINE

DRIVE

BRAKES

WHEELS

SOUTHERN


Universal for most ATVs, dirtbikes& go-kartswith Type-1/Type-2/Type-3/Type-4 4-stroke engines• Both pads: 42mm x 46mm x 8mm (LxHxD)• Bolthole spacing: 30mm

OD130403

Fits ATVs with Type-2 horizontal4-stroke engines• Both pads: 58mm x 33mm x

6mm (LxHxD)• Bolthole spacing: 25mm

OD130409

Fits selected 150-250cc ATVs with Type-2/Type-3/Type-4 4-stroke engines• Large pad: 97mm x 42mm x

8mm (LxHxD)• Small pad: 77mm x 42mm x


OD130402

Fits vehicles with Type-1 2-stroke enginesVery common in ATVs, dirtbikes, Pocket-bikes and scooters• Both pads: 27mm x 18mm x 6mm

(LxHxD)

OD130408Fits rear brake pads for many ATVswith Type-2 50-125cc horizontal 4-stroke engines• Large pad: 85mm x 40mm x 8.5mm (LxHxD)• Small pad: 47mm x 34mm x 10mm (LxHxD)• Bolthole spacing: 70mm

OD130400

Fits ATVs with Type-2 50-125cchorizontal 4-stroke engines• Large pad: 85mm x 36mm x

8.5mm (LxHxD)• Small pad: 48mm x 33mm x


OD130400B

Fits vehicles with Type-2horizontal 4-stroke engines• Both pads: 77mm x

42mm x 7mm(LxHxD)

• Bolthole spacing: 42mm

OD130404

40mm HeIGHT

Fits rear brakes on 50-125cc ATVswith Type-2/Type-3/Type-4 4-stroke engines• Large pad: 88mm x 49mm x 8mm (LxHxD)• Small pad: 56mm x 37mm x 10mm (LxHxD)• Bolthole spacing: 70mm

OD130416

Fits vehicles with Type-2 horizontal 4-stroke engines• Large pad: 85mm x 41mm x 8mm (LxHxD)• Small pad: 48mm x 38mm x 9mm (LxHxD)• Bolthole spacing: 70mm

OD130411

Fits ATVs with Type-2 horizontal 4-stroke engines• Large pad: 74mm x 36mm x

7mm (LxHxD)• Small pad: 38mm x 29mm x


OD130412

Fits ATVs with Type-2 horizontal4-stroke engines• Both pads: 61mm x 27mm x 7mm (LxHxD)

OD130410

(36mm) HeIGHT

Fits selected 50-250cc vehicles with Type-2/Type-3/Type-44-stroke engines• Both pads: 49mm x 35mm

x 7mm (LxHxD)

OD130401























DRIVE

APPAREL

ELECTRIC

FUEL/AIR

LUGGAGE

SECURITY

TOOLS

H20

CHINESEPARTS

ACCESS

CLUTCH

CHEMICAL

CONTROL

PISTONS

BODY

ENGINE

BRAKES

WHEELS

DRIVe belTs/cHaINs


#35 cHaIN

Common on Pocketbikes and Pocket-quads with a transmis-sion gear box• High quality #35 drive chain• Includes masterlink• Link measures: 3/8" x 3/16" (LxW)

160 LiNkS OD100101160

420 DRIVe cHaIN sPROcKeTs

428 DRIVe cHaIN sPROcKeTs

415 cHaIN

• High quality #415 replacement drive chain• Tensile strength: 4070 lbs• Includes masterlink

120 LiNkS OD100102

CLiP STYLE MASTER LiNk OD100119

TOOTHsIZe

sHaFTsIZe

ReTaININGclIP

bOlTHOlesPacING PaRT#

12T 17mm N/A 26mm OD10031212

12T 17mm N/A OD100329

13T 17mm OD100316 32mm OD10031213

14T 17mm OD100316 32mm OD10031214

15T 17mm OD100316 32mm OD10031215

16T 17mm OD100316 32mm OD10031216

32mm retaining clip OD100316

TOOTHsIZe

sHaFTsIZe

ReTaININGclIP

bOlT HOlesPacING PaRT#

12T 17mm NONE OD10031412

12T 20mm NONE OD100328

14T 17mm OD100316 32mm OD10031414

15T 17mm OD100317 36mm OD10031415

16T 17mm OD100316 32mm OD10031416



DRIVe sPROcKeTs

T8F cHaIN UPGRaDe FROm #25 cHaIN

Common on Type-1 47/49cc 2-stroke unitsusing a transmission box from the clutch drive• Increases size of mini #25 Chain to #T8F size chain• Link measures: 11mm x 9.9mm (approx.) at pin (LxW)• Includes masterlink

T8f-118 LiNkS OD1001018f118

T8f-120 LiNkS OD1001018f120

T8f-136 LiNkS OD1001018f136

sURe-FIT 2-sTROKe masTeR lINK PacK

• Pack includes 3 different styles/sizes of master linksused for most makes/models of Type-1 2-stroke units

• Fits most chains for Pocketbikes, ATVs, scootersand mini style vehicles

OD100211P

sURe-FIT 4-sTROKe masTeR lINK PacK

• Pack includes 3 different size master linksused in Type-2 50-150cc horizontal 4-stroke units

• Includes: 420, 428 and 428HG sizes

OD100212P

#25 cHaIN

Smallest replacement chain available for Pocketbikes,Pocketscooters and Pocketquads• Fits Pocketbikes without transmission upgrade• Link measures: 11mm x 9mm (approx.) at pin (LxW)• Includes masterlink

122 LiNkS OD100100122

146 LiNkS OD100100146

166 LiNkS OD100100166

Pocket style units with transmissions require a slightly larger T8F chain

TYPe-3 GY-6 eNGINe DRIVe belTs

Refer to old belt removed from unit;size will be referenced on side of belt

835x20mmx30° OD110205

sIZeleNGTH x wIDTH x GROOVe aNGle PaRT#

669mm x 18.0mm x 30° OD110200

729mm x 17.5mm x 30° OD110208

729mm x 17.7mm x 30° OD110202

743mm x 20.0mm x 30° OD110201

788mm x 18.0mm x 30° OD110203

828mm x 22.5mm x 30° OD110204

835mm x 20.0mm x 30° OD110205

842mm x 20.0mm x 30° OD110206

918mm x 22.5mm x 30° OD110207





















APPAREL

ELECTRIC

FUEL/AIR

LUGGAGE

SECURITY

TOOLS

H20

CHINESEPARTS

ACCESS

CLUTCH

CHEMICAL

CONTROL

PISTONS

BODY

ENGINE

DRIVE

BRAKES

WHEELS

SOUTHERN


VeHIcleFRONT/ReaR

FITmeNTOVeRall

leNGTH (INcHes)eYe to eYe

leNGTH (INcHes)eYe

DIameTeR NOTes PaRT #

ATVs fRT/ REAR 10.50 (10 ½) 9.50 (9 ½) 10mm 5 WAY ADJUSTABLE OD150100

ATVs fRT 10.875 (10 ⅞) 9.875 (9 ⅞) 10mm 5 WAY ADJUSTABLE OD150101

ATVs/MOTORCYCLES

REAR 12.00 10.875 (10 ⅞) 10mm ADJUSTABLE OD150202A

ATVs/MOTORCYCLES

REAR 11.50 (11 ½) 10.25 (10 ¼) 10mm ADJUSTABLE OD150202B

MOTORCYCLES REAR 12.00 10.625 (10 ⅝) 10mmADJUSTABLE / DECORATiVE ONLY

RESERVOiROD150203hP

ATVs/go-karts fRT/ REAR 13.25 (13 ¼) 12.25 (12 ¼) 10mm 42.35mm dia. / 5 WAY ADJUSTABLE OD150112

ATVs fRT/ REAR 13.50 (13 ½) 12.25 (12 ¼) 10mm 50mm dia. / 5 WAY ADJUSTABLE OD150114

sHOcK absORbeRs

OD150100

FOR mOREInFORmATIOn

OD150202A

and

OD150202B

OD150203hP

TIe RODs

DImeNsIONs

Part# l1 (INcHes) l2 (INcHes) l3 (INcHes) l4 (INcHes) l5 (INcHes) D1 DIameTeR D2 DIameTeR THReaD

OD320001 8.0+ 4.0 3.0 1.0 0.5 10mm 10mm Coarse

OD320002 9.5+ 5.5 3.0 1.0 0.5 10mm 10mm Coarse

OD320003 10.5+ 7.0 3.0 1.0 0.5 10mm 10mm Coarse

OD320004 11.5+ 8.0 3.0 1.0 0.5 10mm 10mm Coarse

OD320011 12.0 8.5 3.0 1.0 1.0/1.0 10mm 10mm fine

OD320005 12.0 8.0 3.0 1.0 0.5/1.0 10mm 10mm Coarse

OD320006 13.5 9.5 3.0 1.0 0.5/1.0 10mm 10mm Coarse

OD320008 15.0 11.0 3.0 1.0 0.5/1.0 10mm 10mm Coarse

OD320009 16.0 12.0 3.0 1.0 0.5/1.0 10mm 10mm Coarse

OD320010 18.0 14.0 3.0 1.0 0.5/1.0 10mm 10mm Coarse

L5

L4L3

D2D1L2

L1

• High strength tie rod provides reliability and longevity• Left and Right are the same part number• Includes: 1 tie rod, 2 ball joints, 2 castle nuts and 2 locking washers• Sold individually

FOR mOREInFORmATIOn























Documents

Southern Motorcycle 2016 Product Catalog