Southern Yellow Pine - LDM · LAMINATED POLES engineered to solve problems Southern Yellow Pine Field Raked and Tangent Poles

LAMINATED POLESengineered to solve problems

Southern Yellow PineField Raked and Tangent Poles

1

Company/Customer Name:

Contact Name:

E-Mail Address:

Company Address:

City: State: Zip Code:

Phone Number: Fax Number:

Project Name:

Project Address/Location:

Construction Grade:

Line Voltage(s):

Number of Conductors: Conductor Size/Name(s):

Number of Neutral/Shield Wires: Size/Description(s):

Maximum Weight Span (ft): Maximum Wind Span (ft):

Line Angle or Range of line angles (degrees):

Maximum Line Tension (lb):)

Design Loading Requirements: (NESC Heavy, Grade C, Crossing, etc.)

Pole Height (above groundline):

Lead Length of any Guys:

Soil Type (cohesive/cohesionless):

Soil Shear Strength (psf):

Soil Friction Angle (degrees):

Soil Density (pcf):

Additional Comments:

Fax completed form to 253-627-4188

You can either fax this information to 253-627-4188 or submit your draw-ings and complete this form online at www.mclampoles.com

Please provide sufficient dimensions and loads, or equivalent round-pole class.

To permit us to properly recommend a pole size, please attach a drawing(s) or a sketch as shown below.

Drawing

Sketch

Note: It is the buyer’s responsibility to verify that the recommended pole(s) meet applica-ble NESC and buyer requirements. McFarland Cascade will make recommendations as to pole size and hardware based on customer-supplied loads, overload factors and soil type.

Design Criteria Submission Form

T1

T1T2

T2

T2

T2

T2

T2

DB

AC

G

F

ED

BA

CE

2

Laminated Pole Property Label

Length [ft]

Default Embedded

Length [ft]

Trans. Tip

Dim. [in]

Long. Tip Dim.

[in]

Trans. Base Dim. [in]

Rake Max. [in]

Approx. Treated Weight

[lb]

Ultimate Groundline

Moment [ft-kips]

MSR-4-32 32 7 1/2 7 6 3/4 8 1/4 9 500 60MSR-3-32 32 7 1/2 7 6 3/4 9 5/8 9 600 82MSR-2-32 32 7 1/2 7 6 3/4 11 9 650 107MSR-1-32 32 7 1/2 7 6 3/4 11 9 650 107MSR-H1-32 32 7 1/2 7 6 3/4 12 3/8 9 700 135MSR-H2-32 32 7 1/2 7 6 3/4 15 1/8 9 800 174MSR-H3-32 32 7 1/2 8 6 3/4 16 1/2 9 900 206MSR-H4-32 32 7 1/2 9 6 3/4 17 7/8 9 1,000 240MSR-H5-32 32 7 1/2 9 6 3/4 19 1/4 9 1,050 276MSR-H6-32 32 7 1/2 9 6 3/4 20 5/8 9 1,100 315MSR-H7-32 32 7 1/2 9 6 3/4 22 9 1,150 356MSR-H8-32 32 7 1/2 11 6 3/4 22 9 1,200 356MSR-H9-32 32 7 1/2 11 8 1/2 20 5/8 9 1,450 397MSR-H10-32 32 7 1/2 11 8 1/2 22 9 1,500 448MSR-H11-32 32 7 1/2 12 8 1/2 23 3/8 9 1,600 503MSR-H12-32 32 7 1/2 12 8 1/2 24 3/4 9 1,700 561MSR-H13-32 32 7 1/2 12 8 1/2 26 1/8 9 1,750 621MSR-H14-32 32 7 1/2 13 8 1/2 27 1/2 9 1,850 685MSR-H15-32 32 7 1/2 13 8 1/2 28 7/8 9 1,950 752MSR-H16-32 32 7 1/2 15 8 1/2 30 1/4 9 2,050 821

MSR-4-37 37 8 7 6 3/4 9 5/8 11 650 81MSR-3-37 37 8 7 6 3/4 11 11 750 105MSR-2-37 37 8 7 6 3/4 11 11 750 105MSR-1-37 37 8 8 6 3/4 12 3/8 11 850 134MSR-H1-37 37 8 9 6 3/4 15 1/8 11 1,000 172MSR-H2-37 37 8 9 6 3/4 16 1/2 11 1,050 204MSR-H3-37 37 8 10 6 3/4 17 7/8 11 1,150 237MSR-H4-37 37 8 11 6 3/4 19 1/4 11 1,250 273MSR-H5-37 37 8 12 6 3/4 20 5/8 11 1,350 311MSR-H6-37 37 8 12 6 3/4 22 11 1,400 352MSR-H7-37 37 8 13 6 3/4 23 3/8 11 1,500 395MSR-H8-37 37 8 14 6 3/4 24 3/4 11 1,600 440MSR-H9-37 37 8 14 8 1/2 23 3/8 11 1,950 497MSR-H10-37 37 8 14 8 1/2 24 3/4 11 2,000 554MSR-H11-37 37 8 14 8 1/2 26 1/8 11 2,100 614MSR-H12-37 37 8 15 8 1/2 27 1/2 11 2,200 677MSR-H13-37 37 8 15 8 1/2 28 7/8 11 2,300 742MSR-H14-37 37 8 16 8 1/2 30 1/4 11 2,400 811MSR-H15-37 37 8 16 8 1/2 31 5/8 11 2,500 882MSR-H16-37 37 8 17 8 1/2 33 11 2,650 957

37 ft. SYP

32 ft. SYPRAKED SOUTHERN YELLOW PINE

Southern Yellow Pine | Field Raked Poles | Standard© 2010 McFarland Cascade® | 1-800-426-8430 • www.mclampoles.com

3

Length

DefaultEmbeddedLength

Trans.BaseDim.

Long. Tip Dim.

RakeMax.

Trans.BaseDim.

Trans.TipDim.

Long. Tip Dim.

Line Angle/2

Line Angle/2

Bisect Angle

Foundation Reinforcementas speci�ed

Gro

undl

ine


Length [ft]

Default Embedded

Length [ft]

Trans. Tip

Dim. [in]

Long. Tip Dim.

[in]


Rake Max. [in]


[lb]

Ultimate Groundline

Moment [ft-kips]

MSR-4-42 42 8 6 6 3/4 11 12 800 104MSR-3-42 42 8 6 6 3/4 12 3/8 12 850 132MSR-2-42 42 8 6 6 3/4 13 3/4 12 950 163MSR-1-42 42 8 7 6 3/4 15 1/8 12 1,050 169MSR-H1-42 42 8 7 6 3/4 16 1/2 12 1,100 201MSR-H2-42 42 8 8 6 3/4 17 7/8 12 1,250 234MSR-H3-42 42 8 8 6 3/4 19 1/4 12 1,300 269MSR-H4-42 42 8 9 6 3/4 20 5/8 12 1,400 307MSR-H5-42 42 8 10 6 3/4 22 12 1,500 347MSR-H6-42 42 8 10 6 3/4 23 3/8 12 1,600 390MSR-H7-42 42 8 11 6 3/4 24 3/4 12 1,700 434MSR-H8-42 42 8 12 6 3/4 26 1/8 12 1,800 481MSR-H9-42 42 8 13 8 1/2 26 1/8 12 2,300 606MSR-H10-42 42 8 14 8 1/2 26 1/8 12 2,350 606MSR-H11-42 42 8 14 8 1/2 27 1/2 12 2,450 668MSR-H12-42 42 8 14 8 1/2 28 7/8 12 2,550 733MSR-H13-42 42 8 14 8 1/2 30 1/4 12 2,650 801MSR-H14-42 42 8 15 8 1/2 31 5/8 12 2,800 871MSR-H15-42 42 8 15 8 1/2 33 12 2,850 945MSR-H16-42 42 8 15 8 1/2 34 3/8 12 2,950 1,021

MSR-4-47 47 8 1/2 8 6 3/4 11 14 950 103MSR-3-47 47 8 1/2 8 6 3/4 12 3/8 14 1,050 131MSR-2-47 47 8 1/2 8 6 3/4 13 3/4 14 1,150 161MSR-1-47 47 8 1/2 8 8 1/2 15 1/8 14 1,500 211MSR-H1-47 47 8 1/2 8 8 1/2 16 1/2 14 1,650 250MSR-H2-47 47 8 1/2 8 8 1/2 17 7/8 14 1,750 291MSR-H3-47 47 8 1/2 8 8 1/2 19 1/4 14 1,850 335MSR-H4-47 47 8 1/2 8 8 1/2 20 5/8 14 1,950 382MSR-H5-47 47 8 1/2 9 8 1/2 22 14 2,100 432MSR-H6-47 47 8 1/2 9 8 1/2 23 3/8 14 2,200 484MSR-H7-47 47 8 1/2 10 8 1/2 24 3/4 14 2,350 540MSR-H8-47 47 8 1/2 10 8 1/2 26 1/8 14 2,450 598MSR-H9-47 47 8 1/2 11 10 1/2 24 3/4 14 2,950 667MSR-H10-47 47 8 1/2 12 10 1/2 26 1/8 14 3,150 739MSR-H11-47 47 8 1/2 12 10 1/2 27 1/2 14 3,250 815MSR-H12-47 47 8 1/2 13 10 1/2 28 7/8 14 3,450 894MSR-H13-47 47 8 1/2 14 10 1/2 30 1/4 14 3,650 977MSR-H14-47 47 8 1/2 15 10 1/2 31 5/8 14 3,850 1,063MSR-H15-47 47 8 1/2 15 10 1/2 33 14 3,950 1,152MSR-H16-47 47 8 1/2 16 10 1/2 34 3/8 14 4,150 1,245

47 ft. SYP

42 ft. SYP


4


Length [ft]

Default Embedded

Length [ft]

Trans. Tip

Dim. [in]

Long. Tip Dim.

[in]


Rake Max. [in]


[lb]

Ultimate Groundline

Moment [ft-kips]

MSR-3-52 52 9 7 6.75 13 3/4 15 1,200 160MSR-2-52 52 9 8 6.75 15 1/8 15 1,350 167MSR-1-52 52 9 8 6.75 17 7/8 15 1,500 231MSR-H1-52 52 9 8 8.5 16 1/2 15 1,800 250MSR-H2-52 52 9 8 8.5 17 7/8 15 1,900 291MSR-H3-52 52 9 9 8.5 19 1/4 15 2,050 335MSR-H4-52 52 9 9 8.5 20 5/8 15 2,150 382MSR-H5-52 52 9 9 8.5 22 15 2,300 432MSR-H6-52 52 9 10 8.5 23 3/4 15 2,500 499MSR-H7-52 52 9 11 8.5 24 3/4 15 2,650 540MSR-H8-52 52 9 11 10.5 24 3/4 15 3,250 667MSR-H9-52 52 9 11 10.5 26 1/8 15 3,400 739MSR-H10-52 52 9 11 10.5 27 1/2 15 3,550 815MSR-H11-52 52 9 12 10.5 28 7/8 15 3,750 894MSR-H12-52 52 9 13 10.5 30 1/4 15 3,950 977MSR-H13-52 52 9 14 10.5 31 5/8 15 4,150 1,063MSR-H14-52 52 9 14 10.5 33 15 4,300 1,152MSR-H15-52 52 9 15 10.5 34 3/8 15 4,500 1,245MSR-H16-52 52 9 15 10.5 35 3/4 15 4,650 1,341

MSR-2-57 57 9 1/2 7 8 1/2 15 1/8 17 1,800 208MSR-1-57 57 9 1/2 7 8 1/2 16 1/2 17 1,900 247MSR-H1-57 57 9 1/2 7 8 1/2 17 7/8 17 2,000 287MSR-H2-57 57 9 1/2 8 8 1/2 19 1/4 17 2,200 331MSR-H3-57 57 9 1/2 8 8 1/2 22 17 2,450 426MSR-H4-57 57 9 1/2 8 8 1/2 23 3/8 17 2,550 478MSR-H5-57 57 9 1/2 9 8 1/2 24 3/4 17 2,750 533MSR-H6-57 57 9 1/2 10 8 1/2 26 1/8 17 2,950 591MSR-H7-57 57 9 1/2 11 10 1/2 24 3/4 17 3,550 658MSR-H8-57 57 9 1/2 11 10 1/2 26 1/8 17 3,700 730MSR-H9-57 57 9 1/2 12 10 1/2 27 1/2 17 3,950 804MSR-H10-57 57 9 1/2 12 10 1/2 28 7/8 17 4,100 883MSR-H11-57 57 9 1/2 13 10 1/2 30 1/4 17 4,300 964MSR-H12-57 57 9 1/2 13 10 1/2 31 5/8 17 4,450 1,049MSR-H13-57 57 9 1/2 14 10 1/2 33 17 4,700 1,137MSR-H14-57 57 9 1/2 14 10 1/2 35 3/4 17 5,000 1,324MSR-H15-57 57 9 1/2 15 10 1/2 37 1/8 17 5,200 1,423MSR-H16-57 57 9 1/2 15 10 1/2 38 1/2 17 5,350 1,525

57 ft. SYP

52 ft. SYP


RAKED SOUTHERN YELLOW PINE

5

Length


Trans.BaseDim.

Long. Tip Dim.

RakeMax.

Trans.BaseDim.

Trans.TipDim.

Long. Tip Dim.

Line Angle/2

Line Angle/2

Bisect Angle


Gro

undl

ine


Length [ft]

Default Embedded

Length [ft]

Trans. Tip

Dim. [in]

Long. Tip Dim.

[in]


Rake Max. [in]


[lb]

Ultimate Groundline

Moment [ft-kips]

MSR-1-62 62 10 8 8 1/2 17 7/8 19 2,250 287MSR-H1-62 62 10 8 8 1/2 19 1/4 19 2,400 331MSR-H2-62 62 10 8 8 1/2 20 5/8 19 2,500 377MSR-H3-62 62 10 8 8 1/2 22 19 2,650 426MSR-H4-62 62 10 9 10 1/2 22 19 3,350 526MSR-H5-62 62 10 9 10 1/2 23 3/8 19 3,550 591MSR-H6-62 62 10 10 10 1/2 24 3/4 19 3,800 658MSR-H7-62 62 10 10 10 1/2 26 1/8 19 3,950 730MSR-H8-62 62 10 11 10 1/2 27 1/2 19 4,200 804MSR-H9-62 62 10 12 10 1/2 28 7/8 19 4,450 883MSR-H10-62 62 10 12 10 1/2 30 1/4 19 4,600 964MSR-H11-62 62 10 13 10 1/2 31 5/8 19 4,850 1,049MSR-H12-62 62 10 13 10 1/2 33 19 5,000 1,137MSR-H13-62 62 10 14 10 1/2 34 3/8 19 5,250 1,230MSR-H14-62 62 10 14 10 1/2 35 3/4 19 5,400 1,324MSR-H15-62 62 10 15 10 1/2 38 1/2 19 5,850 1,525MSR-H16-62 62 10 15 10 1/2 39 7/8 19 6,000 1,630

MSR-1-67 67 10 1/2 8 10 1/2 16 1/2 20 2,850 301MSR-H1-67 67 10 1/2 8 10 1/2 17 7/8 20 3,000 350MSR-H2-67 67 10 1/2 8 10 1/2 19 1/4 20 3,200 403MSR-H3-67 67 10 1/2 9 10 1/2 20 5/8 20 3,450 460MSR-H4-67 67 10 1/2 10 10 1/2 22 20 3,700 520MSR-H5-67 67 10 1/2 10 10 1/2 23 3/4 20 3,950 601MSR-H6-67 67 10 1/2 11 10 1/2 24 3/4 20 4,150 650MSR-H7-67 67 10 1/2 11 12 26 1/8 20 4,950 823MSR-H8-67 67 10 1/2 12 12 27 1/2 20 5,250 907MSR-H9-67 67 10 1/2 12 12 28 7/8 20 5,450 996MSR-H10-67 67 10 1/2 13 12 30 1/4 20 5,750 1,088MSR-H11-67 67 10 1/2 13 12 31 5/8 20 5,950 1,183MSR-H12-67 67 10 1/2 14 12 33 20 6,300 1,283MSR-H13-67 67 10 1/2 14 12 34 3/8 20 6,500 1,387MSR-H14-67 67 10 1/2 15 12 35 3/4 20 6,800 1,494MSR-H15-67 67 10 1/2 16 12 37 1/8 20 7,100 1,605MSR-H16-67 67 10 1/2 16 12 38 1/2 20 7,300 1,720

67 ft. SYP

62 ft. SYP


6


Length [ft]

Default Embedded

Length [ft]

Trans. Tip

Dim. [in]

Long. Tip Dim.

[in]


Rake Max. [in]


[lb]

Ultimate Groundline

Moment [ft-kips]

MSR-1-72 72 11 8 10 1/2 16 1/2 22 3,050 301MSR-H1-72 72 11 8 10 1/2 17 7/8 22 3,250 350MSR-H2-72 72 11 8 10 1/2 19 1/4 22 3,400 403MSR-H3-72 72 11 8 10 1/2 20 5/8 22 3,600 460MSR-H4-72 72 11 9 10 1/2 22 22 3,900 520MSR-H5-72 72 11 9 10 1/2 24 3/4 22 4,250 650MSR-H6-72 72 11 10 12 24 3/4 22 5,000 743MSR-H7-72 72 11 10 12 26 1/8 22 5,200 823MSR-H8-72 72 11 11 12 27 1/2 22 5,550 907MSR-H9-72 72 11 12 12 28 7/8 22 5,850 996MSR-H10-72 72 11 14 12 30 1/4 22 6,300 1,088MSR-H11-72 72 11 14 12 31 5/8 22 6,500 1,183MSR-H12-72 72 11 14 12 34 3/4 22 7,000 1,415MSR-H13-72 72 11 15 12 35 3/4 22 7,300 1,494MSR-H14-72 72 11 15 12 37 1/8 22 7,500 1,605MSR-H15-72 72 11 16 12 38 1/2 22 7,800 1,720MSR-H16-72 72 11 16 12 39 7/8 22 8,050 1,838

MSR-1-77 77 11 1/2 8 10 1/2 17 7/8 24 3,450 350MSR-H1-77 77 11 1/2 9 10 1/2 19 1/4 24 3,750 403MSR-H2-77 77 11 1/2 10 10 1/2 20 5/8 24 4,050 460MSR-H3-77 77 11 1/2 11 10 1/2 22 24 4,400 520MSR-H4-77 77 11 1/2 12 10 1/2 23 3/8 24 4,700 583MSR-H5-77 77 11 1/2 12 10 1/2 24 3/4 24 4,900 650MSR-H6-77 77 11 1/2 12 12 24 3/4 24 5,600 743MSR-H7-77 77 11 1/2 13 12 26 1/8 24 5,950 823MSR-H8-77 77 11 1/2 13 12 28 7/8 24 6,400 996MSR-H9-77 77 11 1/2 13 12 30 1/4 24 6,600 1,088MSR-H10-77 77 11 1/2 14 12 31 5/8 24 6,950 1,183MSR-H11-77 77 11 1/2 14 12 33 24 7,200 1,283MSR-H12-77 77 11 1/2 14 12 35 3/4 24 7,650 1,494MSR-H13-77 77 11 1/2 15 12 37 1/8 24 8,000 1,605MSR-H14-77 77 11 1/2 15 12 38 1/2 24 8,250 1,720MSR-H15-77 77 11 1/2 16 12 39 7/8 24 8,600 1,838MSR-H16-77 77 11 1/2 18 12 42 5/8 24 9,300 2,087

77 ft. SYP

72 ft. SYP



7

Length


Trans.BaseDim.

Long. Tip Dim.

RakeMax.

Trans.BaseDim.

Trans.TipDim.

Long. Tip Dim.

Line Angle/2

Line Angle/2

Bisect Angle


Gro

undl

ine


Length [ft]

Default Embedded

Length [ft]

Trans. Tip

Dim. [in]

Long. Tip Dim.

[in]


Rake Max. [in]


[lb]

Ultimate Groundline

Moment [ft-kips]

MSR-1-82 82 12 7 10 1/2 19 1/4 25 3,750 403MSR-H1-82 82 12 8 10 1/2 20 5/8 25 4,100 460MSR-H2-82 82 12 8 10 1/2 22 25 4,300 520MSR-H3-82 82 12 8 10 1/2 23 3/8 25 4,500 583MSR-H4-82 82 12 9 10 1/2 24 3/4 25 4,850 650MSR-H5-82 82 12 10 10 1/2 26 1/8 25 5,200 720MSR-H6-82 82 12 12 10 1/2 27 1/2 25 5,600 794MSR-H7-82 82 12 12 12 27 1/2 25 6,400 907MSR-H8-82 82 12 12 12 28 7/8 25 6,650 996MSR-H9-82 82 12 13 12 31 5/8 25 7,300 1,183MSR-H10-82 82 12 14 12 33 25 7,650 1,283MSR-H11-82 82 12 14 12 34 3/8 25 7,900 1,387MSR-H12-82 82 12 14 12 37 1/8 25 8,400 1,605MSR-H13-82 82 12 16 12 38 1/2 25 8,900 1,720MSR-H14-82 82 12 16 12 39 7/8 25 9,150 1,838MSR-H15-82 82 12 17 12 41 1/4 25 9,500 1,961MSR-H16-82 82 12 17 12 44 25 10,000 2,216

MSR-1-87 87 12 1/2 8 10 1/2 20 5/8 27 4350 460MSR-H1-87 87 12 1/2 8 10 1/2 22 27 4,550 520MSR-H2-87 87 12 1/2 9 10 1/2 23 3/8 27 4,900 583MSR-H3-87 87 12 1/2 9 10 1/2 24 3/4 27 5,150 650MSR-H4-87 87 12 1/2 9 12 24 3/4 27 5,850 743MSR-H5-87 87 12 1/2 10 12 26 1/8 27 6,250 823MSR-H6-87 87 12 1/2 10 12 27 1/2 27 6,550 907MSR-H7-87 87 12 1/2 12 12 28 7/8 27 7,050 996MSR-H8-87 87 12 1/2 12 12 30 1/4 27 7,300 1,088MSR-H9-87 87 12 1/2 13 12 31 5/8 27 7,700 1,183MSR-H10-87 87 12 1/2 13 12 34 3/8 27 8,250 1,387MSR-H11-87 87 12 1/2 14 12 35 3/4 27 8,650 1,494MSR-H12-87 87 12 1/2 15 12 37 1/8 27 9,000 1,605MSR-H13-87 87 12 1/2 15 12 39 7/8 27 9,550 1,838MSR-H14-87 87 12 1/2 16 12 41 1/4 27 9,950 1,961MSR-H15-87 87 12 1/2 16 12 44 27 10,450 2,216MSR-H16-87 87 12 1/2 17 12 45 3/8 27 10,850 2,350

87 ft. SYP

82 ft. SYP


8


Length [ft]

Default Embedded

Length [ft]

Trans. Tip

Dim. [in]

Long. Tip Dim.

[in]


Rake Max. [in]


[lb]

Ultimate Groundline

Moment [ft-kips]

MSR-1-92 92 13 8 12 20 5/8 28 5,250 518MSR-H1-92 92 13 8 12 22 28 5,500 586MSR-H2-92 92 13 8 12 23 3/8 28 5,800 657MSR-H3-92 92 13 9 12 24 3/4 28 6,200 733MSR-H4-92 92 13 9 12 26 1/8 28 6,500 812MSR-H5-92 92 13 10 12 27 1/2 28 6,900 895MSR-H6-92 92 13 10 12 28 7/8 28 7,150 982MSR-H7-92 92 13 11 12 30 1/4 28 7,600 1,073MSR-H8-92 92 13 12 12 31 5/8 28 8,000 1,168MSR-H9-92 92 13 13 12 33 28 8,400 1,266MSR-H10-92 92 13 13 12 35 3/4 28 8,950 1,474MSR-H11-92 92 13 14 12 37 1/8 28 9,400 1,584MSR-H12-92 92 13 15 12 39 7/8 28 10,050 1,814MSR-H13-92 92 13 15 12 41 1/4 28 10,350 1,935MSR-H14-92 92 13 16 14 41 1/4 28 12,350 2,257MSR-H15-92 92 13 16 14 42 5/8 28 12,550 2,402MSR-H16-92 92 13 16 14 44 28 12,850 2,552

MSR-1-97 97 13 1/2 8 12 22 30 5,800 586MSR-H1-97 97 13 1/2 9 12 22 30 5,950 586MSR-H2-97 97 13 1/2 9 12 23 3/8 30 6,250 658MSR-H3-97 97 13 1/2 10 12 24 3/4 30 6,700 733MSR-H4-97 97 13 1/2 10 12 26 1/8 30 7,000 812MSR-H5-97 97 13 1/2 10 12 28 7/8 30 7,550 982MSR-H6-97 97 13 1/2 11 12 30 1/4 30 8,000 1,073MSR-H7-97 97 13 1/2 11 12 31 5/8 30 8,250 1,168MSR-H8-97 97 13 1/2 12 12 33 30 8,700 1,266MSR-H9-97 97 13 1/2 13 12 34 3/8 30 9,150 1,368MSR-H10-97 97 13 1/2 13 12 37 1/8 30 9,750 1,584MSR-H11-97 97 13 1/2 14 12 38 1/2 30 10,150 1,697MSR-H12-97 97 13 1/2 14 12 41 1/4 30 10,750 1,935MSR-H13-97 97 13 1/2 15 14 41 1/4 30 12,700 2,257MSR-H14-97 97 13 1/2 15 14 42 5/8 30 13,050 2,402MSR-H15-97 97 13 1/2 16 14 44 30 13,550 2,552MSR-H16-97 97 13 1/2 17 14 45 3/8 30 14,050 2,705

97 ft. SYP

92 ft. SYP



9

Length


Trans.BaseDim.

Long. Tip Dim.

RakeMax.

Trans.BaseDim.

Trans.TipDim.

Long. Tip Dim.

Line Angle/2

Line Angle/2

Bisect Angle


Gro

undl

ine


Length [ft]

Default Embedded

Length [ft]

Trans. Tip

Dim. [in]

Long. Tip Dim.

[in]


Rake Max. [in]


[lb]

Ultimate Groundline

Moment [ft-kips]

MSR-1-102 102 14 8 12 22 32 6,100 586MSR-H1-102 102 14 8 12 23 3/8 32 6,400 658MSR-H2-102 102 14 8 12 24 3/4 32 6,700 733MSR-H3-102 102 14 9 12 26 1/8 32 7,150 812MSR-H4-102 102 14 9 12 27 1/2 32 7,450 895MSR-H5-102 102 14 10 12 28 7/8 32 7,950 982MSR-H6-102 102 14 11 12 30 1/4 32 8,400 1,073MSR-H7-102 102 14 12 12 31 5/8 32 8,850 1,168MSR-H8-102 102 14 13 12 34 3/8 32 9,600 1,368MSR-H9-102 102 14 13 12 35 3/4 32 9,900 1,474MSR-H10-102 102 14 14 12 38 1/2 32 10,700 1,697MSR-H11-102 102 14 14 12 39 7/8 32 11,000 1,814MSR-H12-102 102 14 16 12 41 1/4 32 11,600 1,935MSR-H13-102 102 14 16 14 39 7/8 32 13,200 2,116MSR-H14-102 102 14 16 14 42 5/8 32 13,900 2,402MSR-H15-102 102 14 16 14 44 32 14,250 2,552MSR-H16-102 102 14 16 14 46 3/4 32 14,950 2,863

MSR-1-107 107 14 1/2 8 12 23 3/8 33 6,700 658MSR-H1-107 107 14 1/2 8 12 24 3/4 33 7,050 733MSR-H2-107 107 14 1/2 8 12 26 1/8 33 7,350 812MSR-H3-107 107 14 1/2 8 12 27 1/2 33 7,650 895MSR-H4-107 107 14 1/2 9 12 28 7/8 33 8,150 982MSR-H5-107 107 14 1/2 10 12 30 1/4 33 8,650 1,073MSR-H6-107 107 14 1/2 11 12 31 5/8 33 9,100 1,168MSR-H7-107 107 14 1/2 12 12 33 33 9,600 1,266MSR-H8-107 107 14 1/2 12 12 35 3/4 33 10,250 1,474MSR-H9-107 107 14 1/2 13 12 38 1/2 33 11,050 1,697MSR-H10-107 107 14 1/2 14 12 39 3/4 33 11,500 1,803MSR-H11-107 107 14 1/2 14 12 41 1/4 33 11,850 1,935MSR-H12-107 107 14 1/2 15 14 41 1/4 33 14,000 2,257MSR-H13-107 107 14 1/2 15 14 42 5/8 33 14,350 2,402MSR-H14-107 107 14 1/2 16 14 44 33 14,950 2,552MSR-H15-107 107 14 1/2 16 14 45 3/8 33 15,300 2,705MSR-H16-107 107 14 1/2 16 14 48 1/8 33 16,400 3,025

107 ft. SYP

102 ft. SYP


10

Southern Yellow Pine | Tangent Poles | Standard© 2010 McFarland Cascade® | 1-800-426-8430 • www.mclampoles.com

TANGENT SOUTHERN YELLOW PINE


Length [ft]

Default Embedded

Length [ft]

Trans. Tip

Dim. [in]

Long. Tip Dim.

[in]

Trans. Base Dim.

[in]


[lb]

Ultimate Groundline

Moment [ft-kips]

MST-5-30 30 5 5 6 3/4 8 1/4 450 60MST-4-30 30 5 5 6 3/4 9 5/8 500 82MST-3-30 30 5 6 6 3/4 11 550 107MST-2-30 30 5 6 6 3/4 11 550 107MST-1-30 30 5 7 6 3/4 12 3/8 650 135

30 ft. SYP

35 ft. SYP

MST-5-45 45 6 1/2 5 6 3/4 11 800 104MST-4-45 45 6 1/2 5 6 3/4 12 3/8 900 132MST-3-45 45 6 1/2 6 6 3/4 12 3/8 900 132MST-2-45 45 6 1/2 6 6 3/4 13 3/4 1,000 163MST-1-45 45 6 1/2 6 6 3/4 16 1/2 1,150 201MST-H1-45 45 6 1/2 7 6 3/4 17 7/8 1,250 234MST-H2-45 45 6 1/2 7 6 3/4 19 1/4 1,350 269

MST-5-40 40 6 6 6 3/4 9 5/8 700 80MST-4-40 40 6 6 6 3/4 11 750 104MST-3-40 40 6 6 6 3/4 12 3/8 800 132MST-2-40 40 6 6 6 3/4 13 3/4 900 163MST-1-40 40 6 7 6 3/4 15 1/8 1,000 169

MST-5-35 35 5 1/2 6 6 3/4 8 1/4 550 59MST-4-35 35 5 1/2 6 6 3/4 9 5/8 600 81MST-3-35 35 5 1/2 6 6 3/4 11 650 106MST-2-35 35 5 1/2 6 6 3/4 12 3/8 700 134MST-1-35 35 5 1/2 7 6 3/4 12 3/8 750 134

MST-5-50 50 7 5 8 1/2 11 1,100 110MST-4-50 50 7 5 8 1/2 12 3/8 1,200 139MST-3-50 50 7 6 8 1/2 12 3/8 1,300 139MST-2-50 50 7 6 8 1/2 13 3/4 1,400 172MST-1-50 50 7 6 8 1/2 15 1/8 1,500 208MST-H1-50 50 7 7 8 1/2 16 1/2 1,650 247MST-H2-50 50 7 7 8 1/2 17 7/8 1,750 287

45 ft. SYP

40 ft. SYP

50 ft. SYP

11

Length


Trans.BaseDim.

Long. Tip Dim.

Trans.BaseDim.

Trans.TipDim.

Long. Tip Dim.

Line Angle/2

Line Angle/2

Bisect Angle


Gro

undl

ine



Length [ft]

Default Embedded

Length [ft]

Trans. Tip

Dim. [in]

Long. Tip Dim.

[in]

Trans. Base Dim.

[in]


[lb]

Ultimate Groundline

Moment [ft-kips]

MST-5-55 55 7 1/2 5 8 1/2 12 3/8 1,350 139MST-4-55 55 7 1/2 5 8 1/2 13 3/4 1,450 172MST-3-55 55 7 1/2 6 8 1/2 15 1/8 1,650 208MST-2-55 55 7 1/2 6 8 1/2 16 1/2 1,750 247MST-1-55 55 7 1/2 7 8 1/2 17 7/8 1,950 287MST-H1-55 55 7 1/2 7 8 1/2 19 1/4 2,050 331MST-H2-55 55 7 1/2 8 8 1/2 20 5/8 2,200 377

55 ft. SYP

60 ft. SYPMST-3-60 60 8 6 8 1/2 15 1/8 1800 208MST-2-60 60 8 6 8 1/2 16 1/2 1,900 247MST-1-60 60 8 7 8 1/2 17 7/8 2,100 287MST-H1-60 60 8 7 8 1/2 19 1/4 2,200 331MST-H2-60 60 8 8 8 1/2 20 5/8 2,400 377MST-H3-60 60 8 8 8 1/2 22 2,550 426MST-H4-60 60 8 9 8 1/2 23 3/8 2,750 478MST-H5-60 60 8 9 8 1/2 26 1/8 3,000 591MST-H6-60 60 8 10 8 1/2 27 1/2 3,150 651

65 ft. SYPMST-3-65 65 8 1/2 6 8 1/2 16 1/2 2,050 244MST-2-65 65 8 1/2 7 10 1/2 16 1/2 2,650 301MST-1-65 65 8 1/2 7 10 1/2 17 7/8 2,800 350MST-H1-65 65 8 1/2 7 10 1/2 17 7/8 2,800 350MST-H2-65 65 8 1/2 8 10 1/2 19 1/4 3,050 403MST-H3-65 65 8 1/2 8 10 1/2 20 5/8 3,250 460MST-H4-65 65 8 1/2 9 10 1/2 22 3,500 520MST-H5-65 65 8 1/2 9 10 1/2 24 3/4 3,800 650MST-H6-65 65 8 1/2 10 10 1/2 26 1/8 4,100 720

MST-3-70 70 9 6 8 1/2 16 1/2 2,200 244MST-2-70 70 9 7 10 1/2 16 1/2 2,850 301MST-1-70 70 9 7 10 1/2 17 7/8 3,000 350MST-H1-70 70 9 7 10 1/2 19 1/4 3,200 403MST-H2-70 70 9 8 10 1/2 20 5/8 3,450 460MST-H3-70 70 9 8 10 1/2 22 3,650 520MST-H4-70 70 9 9 10 1/2 23 3/8 3,950 583MST-H5-70 70 9 9 10 1/2 26 1/8 4,300 720MST-H6-70 70 9 10 10 1/2 27 1/2 4,550 794

70 ft. SYP

12



80 ft. SYPMST-3-80 80 10 6 10 1/2 16 1/2 3,150 297MST-2-80 80 10 7 10 1/2 17 7/8 3,450 346MST-1-80 80 10 7 10 1/2 19 1/4 3,650 398MST-H1-80 80 10 7 10 1/2 20 5/8 3,850 454MST-H2-80 80 10 8 10 1/2 22 4,150 513MST-H3-80 80 10 8 10 1/2 23 3/8 4,350 575MST-H4-80 80 10 9 10 1/2 26 1/8 4,900 711MST-H5-80 80 10 10 10 1/2 27 1/2 5,200 784MST-H6-80 80 10 11 10 1/2 28 7/8 5,550 860

85 ft. SYPMST-3-85 85 10 1/2 6 10 1/2 17 7/8 3,550 346MST-2-85 85 10 1/2 7 10 1/2 19 1/4 3,850 398MST-1-85 85 10 1/2 7 10 1/2 20 5/8 4,100 454MST-H1-85 85 10 1/2 7 10 1/2 22 4,300 513MST-H2-85 85 10 1/2 8 10 1/2 23 3/8 4,650 575MST-H3-85 85 10 1/2 8 10 1/2 26 1/8 5,050 711MST-H4-85 85 10 1/2 9 10 1/2 27 1/2 5,400 784MST-H5-85 85 10 1/2 10 10 1/2 28 7/8 5,750 860MST-H6-85 85 10 1/2 11 10 1/2 30 1/4 6,100 939

MST-3-90 90 11 6 10 1/2 17 7/8 3,750 346MST-2-90 90 11 7 10 1/2 19 1/4 4,100 398MST-1-90 90 11 7 10 1/2 20 5/8 4,300 454MST-H1-90 90 11 7 10 1/2 22 4,550 513MST-H2-90 90 11 8 10 1/2 23 3/8 4,900 575MST-H3-90 90 11 8 10 1/2 26 1/8 5,350 711MST-H4-90 90 11 9 10 1/2 27 1/2 5,700 784MST-H5-90 90 11 10 10 1/2 30 1/4 6,300 939MST-H6-90 90 11 11 10 1/2 31 5/8 6,650 1,022

90 ft. SYP


Length [ft]

Default Embedded

Length [ft]

Trans. Tip

Dim. [in]

Long. Tip Dim.

[in]

Trans. Base Dim.

[in]


[lb]

Ultimate Groundline

Moment [ft-kips]

MST-3-75 75 9 1/2 6 10 1/2 15 2,700 246MST-2-75 75 9 1/2 7 10 1/2 17 7/8 3,250 346MST-1-75 75 9 1/2 7 10 1/2 19 1/4 3,400 398MST-H1-75 75 9 1/2 7 10 1/2 20 5/8 3,600 454MST-H2-75 75 9 1/2 8 10 1/2 22 3,900 513MST-H3-75 75 9 1/2 8 10 1/2 23 3/8 4,100 575MST-H4-75 75 9 1/2 9 10 1/2 24 3/4 4,400 641MST-H5-75 75 9 1/2 10 10 1/2 26 1/8 4,700 711MST-H6-75 75 9 1/2 11 10 1/2 27 1/2 5,000 784

75 ft. SYP

13

Length


Trans.BaseDim.

Long. Tip Dim.

Trans.BaseDim.

Trans.TipDim.

Long. Tip Dim.

Line Angle/2

Line Angle/2

Bisect Angle


Gro

undl

ine


95 ft. SYP

100 ft. SYPMST-2-100 100 12 6 12 19 1/4 5,050 449MST-1-100 100 12 7 12 20 5/8 5,500 511MST-H1-100 100 12 7 12 22 5,800 578MST-H2-100 100 12 7 12 24 3/4 6,350 723MST-H3-100 100 12 8 12 26 1/8 6,800 801MST-H4-100 100 12 9 12 27 1/2 7,250 884MST-H5-100 100 12 10 12 30 1/4 8,000 1,059MST-H6-100 100 12 11 12 31 5/8 8,450 1,152

105 ft. SYPMST-2-105 105 12 1/2 6 12 20 5/8 5,600 511MST-1-105 105 12 1/2 7 12 22 6,050 578MST-H1-105 105 12 1/2 7 12 24 3/4 6,650 723MST-H2-105 105 12 1/2 7 12 26 1/8 6,950 801MST-H3-105 105 12 1/2 8 12 27 1/2 7,450 884MST-H4-105 105 12 1/2 9 12 30 1/4 8,250 1,059MST-H5-105 105 12 1/2 10 12 31 5/8 8,700 1,152MST-H6-105 105 12 1/2 11 12 33 9,200 1,249

MST-2-110 110 13 6 12 20 5/8 5,850 511MST-1-110 110 13 7 12 22 6,350 578MST-H1-110 110 13 7 12 24 3/4 7,000 723MST-H2-110 110 13 7 12 26 1/8 7,300 801MST-H3-110 110 13 8 12 27 1/2 7,800 884MST-H4-110 110 13 9 12 30 1/4 8,600 1,059MST-H5-110 110 13 10 12 31 5/8 9,100 1,152MST-H6-110 110 13 11 12 33 9,600 1,249

110 ft. SYP


Length [ft]

Default Embedded

Length [ft]

Trans. Tip

Dim. [in]

Long. Tip Dim.

[in]

Trans. Base Dim.

[in]


[lb]

Ultimate Groundline

Moment [ft-kips]

MST-2-95 95 11 1/2 6 12 19 1/4 4,800 449MST-1-95 95 11 1/2 7 12 20 5/8 5,200 511MST-H1-95 95 11 1/2 7 12 22 5,500 578MST-H2-95 95 11 1/2 7 12 23 3/8 5,750 649MST-H3-95 95 11 1/2 8 12 26 1/8 6,450 801MST-H4-95 95 11 1/2 9 12 27 1/2 6,900 884MST-H5-95 95 11 1/2 10 12 30 1/4 7,600 1,059MST-H6-95 95 11 1/2 11 12 31 5/8 8,050 1,152

14


Length [ft]

Default Embedded

Length [ft]

Trans. Tip

Dim. [in]

Long. Tip Dim.

[in]

Trans. Base Dim.

[in]


[lb]

Ultimate Groundline

Moment [ft-kips]

MST-2-115 115 13 1/2 6 12 22 6,450 578MST-1-115 115 13 1/2 7 12 23 3/8 6,950 649MST-H1-115 115 13 1/2 7 12 24 3/4 7,300 723MST-H2-115 115 13 1/2 7 12 26 1/8 7,650 801MST-H3-115 115 13 1/2 8 12 28 7/8 8,500 969MST-H4-115 115 13 1/2 9 12 30 1/4 9,000 1,059MST-H5-115 115 13 1/2 10 12 33 9,850 1,249MST-H6-115 115 13 1/2 11 12 34 3/8 10,400 1,350



120 ft. SYPMST-2-120 120 14 6 12 22 6,700 578MST-1-120 120 14 7 12 23 3/8 7,250 649MST-H1-120 120 14 7 12 26 1/8 7,950 801MST-H2-120 120 14 7 12 27 1/2 8,300 884MST-H3-120 120 14 8 12 30 1/4 9,200 1,059MST-H4-120 120 14 9 12 33 10,100 1,249MST-H5-120 120 14 10 12 34 3/8 10,600 1,350MST-H6-120 120 14 11 12 35 3/4 11,150 1,455

125 ft. SYPMST-2-125 125 14 1/2 6 12 22 7,000 578MST-1-125 125 14 1/2 7 12 23 3/8 7,550 649MST-H1-125 125 14 1/2 7 12 26 1/8 8,300 801MST-H2-125 125 14 1/2 7 12 28 7/8 9,000 969MST-H3-125 125 14 1/2 8 12 30 1/4 9,550 1,059MST-H4-125 125 14 1/2 9 12 33 10,500 1,249MST-H5-125 125 14 1/2 10 12 34 3/8 11,050 1,350MST-H6-125 125 14 1/2 11 12 37 1/8 12,000 1,563

MST-2-130 130 15 6 12 22 7,300 578MST-1-130 130 15 7 12 23 3/8 7,850 649MST-H1-130 130 15 7 12 26 1/8 8,600 801MST-H2-130 130 15 7 12 28 7/8 9,350 969MST-H3-130 130 15 8 12 31 5/8 10,300 1,152MST-H4-130 130 15 9 14 31 5/8 12,300 1,344MST-H5-130 130 15 10 14 33 13,000 1,458MST-H6-130 130 15 11 14 34 3/8 13,650 1,575

130 ft. SYP

115 ft. SYP

15

Length


Trans.BaseDim.

Long. Tip Dim.

Trans.BaseDim.

Trans.TipDim.

Long. Tip Dim.

Line Angle/2

Line Angle/2

Bisect Angle


Gro

undl

ine


135 ft. SYP


Length [ft]

Default Embedded

Length [ft]

Trans. Tip

Dim. [in]

Long. Tip Dim.

[in]

Trans. Base Dim.

[in]


[lb]

Ultimate Groundline

Moment [ft-kips]

MST-2-135 135 15 1/2 6 12 23 3/8 7,950 649MST-1-135 135 15 1/2 7 12 24 3/4 8,550 723MST-H1-135 135 15 1/2 7 14 26 1/8 10,450 935MST-H2-135 135 15 1/2 8 14 27 1/2 11,150 1,031MST-H3-135 135 15 1/2 9 14 28 7/8 11,850 1,131MST-H4-135 135 15 1/2 10 14 31 5/8 13,050 1,344MST-H5-135 135 15 1/2 11 14 33 13,750 1,458MST-H6-135 135 15 1/2 12 14 34 3/8 14,450 1,575

16

INSTALLATION OF MCFARLAND CASCADE LAMINATED POLES

Poles are typically predrilled and sized for a specific location, specific equipment and orientation. Because they can look very similar, it is imperative that each pole be matched with the specification and location.

Adequate performance of the foundation system relies on ac-curate descriptions of soil shear strength (cohesive soils), friction angle, density (cohesionless soils) and setting depth. McFarland Cascade will make recommendations based on these factors but it is the responsibility of the owner to accept the final design of the setting depth and foundation requirements.

Culvert or Sleeve

Extra DepthGravelFilled

Example Foundation for Denser Soils

Example Foundation for Soft SoilInstallations

17

LIFTING AND HANDLING

Laminated poles are handled the same way as round wood poles (to minimize corner denting, pad chokers and chains). Poles are marked “BP” at the balance point for ease of lifting and handling

SETTING DEPTH

The setting depths mentioned in this brochure are based on the “standard” or “rule of thumb” (ROT) method of determining setting depth. That method is to add two feet to 10% of pole length for tangent poles and 4 feet to 10% of the pole length for raked poles. Accurate soil data, however, may permit the setting depth to be decreased (thereby saving cost and weight) or, con-versely, require deeper embedment depth or use of a caisson/sleeve for additional support to avoid overturning.

It is the customer’s responsibility to investigate soil conditions and determine the oppropriate setting depth.

FOUNDATION: PASSIVE GROUND RESISTING SYSTEM

Laminated poles are typically narrower than round poles in the loaded direction and, depending on the soils and loads specified, require that the effective width be increased by the addition of load-bearing steel fins. McFarland Cascade will supply fins for the pole based on the loads and soils data supplied or the maximum groundline moment for the pole classification, pole length and setting depth.

RAKE ANGLE

The rake angle of the pole is recommended to be no more than 3% of the above-ground height of the pole as measured from the tip of the uncut side to the base of the pole.

Pole Width

7/8˝ Bolt

Recommended Fin Depth

Rec

omm

ende

d S

e�in

g D

epth

Pole

Dep

th

Lower Fin Length

Fin Width

Upper Fin Length

18

BACKFILL

Backfill is recommended to be crushed stone compacted in 6-inch lifts.

TENSIONING

Once conductors are tensioned to design, wait at least 30 minutes for pole to reach a point of equilibrium and retention to design.

Back Fill

FoundationSystem

Se

ing

Dep

th

Hole Diameter

Field RakeDistance

Cut Side

Uncut Side

Load Direction

Uncut SideCut Side

BisectLineAngle

Rake Direction

Load Direction1/2

Lin

e A

ngle

1/2

Lin

e A

ngle

Cond

ucto

rCo

nduc

tor

Yardstick

19

PRESERVATIVE TREATMENT

All poles are treated to comply with AWPA Specification UC4 and the requirements of AITC 109. Standard treatment is Pentachlo-rophenol (Penta or PCP). Poles may be radial drilled or through-bored from two feet above the groundline to three feet below the groundline or as specified by buyer.

LAMINATING STANDARDS

Poles are manufactured in accordance with AITC 117, APA Y117 and APA Y117 Supplement. Designs are based on Power Line Systems finite element analysis with design stresses determined in accordance with ANSI O5.2 and other recognized sources.

Width

Boring Pa�ern (Do�ed Line)

Groundline

5/16˝ dia. HolesSloped 5 degrees

Pole Top

2-1/2˝ ExclusionZone for TensionLams

2´ -

0˝ (

min

.)

or a

s sp

eci

ed

3´-

0˝ (

min

.)

or a

s sp

eci

ed3˝

5˝

20

21

A few examples of laminated wood poles in use.

22

Corporate Headquarters: PO Box 1496, Tacoma, WA 98401-1496 Phone: 253-572-3033 • 800-426-8430 • Fax: 253-627-4188

www.mclampoles.com • [email protected]

PLPC1110

Documents

Southern Yellow Pine - LDM · LAMINATED POLES engineered to solve problems Southern Yellow Pine Field Raked and Tangent Poles