Slide 1

Deploying Cisco Service Provider Advanced Network Routing SPADVROUTE v1.0 2012 Cisco and/or its affiliates. All rights reserved.SPADVROUTE v1.0-#1Course Management 2012 Cisco and/or its affiliates. All rights reserved.SPADVROUTE v1.0-#2Pod Access InformationParameterDefault ValueRemote lab SSH access IP address128.107.245.9Remote lab SSH access usernameinstrRemote lab SSH access passwordtestMePod PE (Cisco IOS XR Software) router usernamerootPod PE (Cisco IOS XR Software) router password1ronManPod CE, SW, and PE privileged-level passwordcisco 2012 Cisco and/or its affiliates. All rights reserved.SPADVROUTE v1.0-#Lab TopologyTeam 1Team 3Team 2Team 4Pod 1Pod 2Pod 5Pod 6Pod 3Pod 4Pod 7Pod 8

CE1CE2SW1SW2PE1PE2CE5CE6SW5SW6PE5PE6PE3PE4PE7PE8SW3SW4CE3CE4SW7SW8CE7CE8SW12SW56SW34SW78P1P2GiOC3 POSFa 2012 Cisco and/or its affiliates. All rights reserved.SPADVROUTE v1.0-#4Lab Interface Identification: Core ViewTeam 1Team 3Team 2Team 4Pod 1Pod 2Pod 5Pod 6Pod 3Pod 4Pod 7Pod 8

PE1PE2PE5PE6PE3PE4PE7PE8P1P2IOS XR Gi0/0/0/x26480137590184629573IOS XE Gi0/0/x231222223233333111111123 2012 Cisco and/or its affiliates. All rights reserved.SPADVROUTE v1.0-#5Lab Interface Identification: Team ViewFaOC3 POSGiTeam zPod yPod xGi0/0/0/2

CExCEySWxSWyPExPEySWxyP2Connections to PE(y+2)Gi0/0/0/0Gi0/0/0Fa0/2Fa0/2Fa0/1Fa0/1Gi0/0Gi0/0Gi0/1Gi0/1Fa0/23Fa0/24Fa0/23Fa0/24Fa0/21Fa0/22Fa0/21Fa0/22Fa0/21Fa0/22Fa0/23Fa0/24Fa0/1Fa0/2P1Gi0/0/0/3Gi0/0/0/1Gi0/0/1Gi0/0/2Gi0/0/3POS0/2/0POS0/2/1POS0/2/0POS0/2/1 2012 Cisco and/or its affiliates. All rights reserved.SPADVROUTE v1.0-#6Lab IP Addressing: Team Viewz = 1,2,3, and 4x = 1,3,5, and 7y = 2,4,6, and 8w =1 (for teams 1 and 2)2 (for teams 3 and 4)FaOC3 POSLoopbackGiTeam zPod yPod x192.168.1xy.0/24.y0.y0.y0192.168.y2.0/24.y0.x0.x0192.168.x1.0/24192.168.x2.0/24192.168.y1.0/24192.168.2w2.0/24

CExCEySWxSWyPExPEySWxyP2Connections to PE(y+2)192.168.1.0/24.1.1.2.2192.168.10x.0/24192.168.10y.0/24192.168.2w1.0/24.1.1.2.2.x0.y0.y0.x0.x1.y110.y.10.110.x.10.110.x.1.110.xy.0.110.0.2.110.0.1.1P110.x.0.110.y.0.110.y.1.1192.168.10x.0/24192.168.10y.0/24192.168.2.0/24 2012 Cisco and/or its affiliates. All rights reserved.SPADVROUTE v1.0-#7Visual Objective for Lab 2-1: Implement BGP Route ReflectorsTeam zPod yPod xCExCEyPExPEyP1BGP AS 64500BGP AS 6450xBGP AS 6450yEBGPEBGPIBGPIBGPBGP Route Reflector

P2BGP Route Reflector

IBGPIBGP 2012 Cisco and/or its affiliates. All rights reserved.SPADVROUTE v1.0-#8Visual Objective for Lab 3-1: Implement BGP Security OptionsTeam zPod yAuthenticatedEBGPPod xCExCEyPExPEyP1BGP AS 64500BGP AS 6450xBGP AS 6450yAuthenticatedEBGPIBGPIBGP

P2RTBH Triggering Router

IBGPIBGP 2012 Cisco and/or its affiliates. All rights reserved.SPADVROUTE v1.0-#9Visual Objective for Lab 3-2: Improve BGP ScalabilityTeam zPod yAuthenticatedEBGPPod xCExCEyPExPEyP1BGP AS 64500BGP AS 6450xBGP AS 6450yAuthenticatedEBGPIBGPIBGP

P2

IBGPIBGPImplement configuration templatesConfigure route dampening

Implement peer templatesConfigure route dampening

2012 Cisco and/or its affiliates. All rights reserved.SPADVROUTE v1.0-#10Visual Objective for Lab 4-1: Implement Layer 2 and Layer 3 MulticastTeam zPod yPod xCExCEyPExPEyP1P2

Gi0/0/0/0Gi0/0/0Fa0/2Fa0/2Fa0/1Fa0/1Gi0/0

Gi0/0

Monitor the network without and with IGMP snoopingConfigure IP multicast support and monitoring for IGMP and MLD 2012 Cisco and/or its affiliates. All rights reserved.SPADVROUTE v1.0-#11Visual Objective for Lab 5-1: Enable and Optimize PIM-SMTeam zPod yPod xCExCEyPExPEyP1

P2

Rendezvous PointMulticast Source: xMulticast Traffic for 224.1.x.1

Multicast Receiver: xMulticast Receiver: x 2012 Cisco and/or its affiliates. All rights reserved.SPADVROUTE v1.0-#12Visual Objective for Lab 5-2: Implement PIM-SM EnhancementsTeam zPod yPod xCExCEyPExPEyP1

P2

Multicast Source: x

Multicast Receiver: xConfigure PIM-SSMConfigure BIDIR-PIMRendezvous Point 2012 Cisco and/or its affiliates. All rights reserved.SPADVROUTE v1.0-#13Visual Objective for Lab 5-3: Implement Rendezvous Point DistributionTeam zPod yPod xCExCEyPExPEyGi0/0/0/0Gi0/0/0Gi0/0Gi0/0

Receiver 224.1.x.1Receiver 224.1.x.1Source 224.1.x.1Task 1: Enable Auto-RPTask 2: Enable BSRTask 3: Enable Anycast RPMSDPPIM SM 2012 Cisco and/or its affiliates. All rights reserved.SPADVROUTE v1.0-#14Visual Objective for Lab 6-1: Implement IPv6 MulticastingTeam zPod yPod xCExCEyPExPEyP1

P2

Rendezvous PointMulticast Source: x

Multicast Receiver: xMulticast Traffic with Embedded RP 2012 Cisco and/or its affiliates. All rights reserved.SPADVROUTE v1.0-#15Visual Objective for Lab 6-2: Implement DHCPv6 Server with Prefix DelegationTeam zPod yPod xCExCEyPExPEyP1

P2

Configure prefix delegation DHCPv6 serverConfigure DHCPv6 LiteConfigure prefix delegation DHCPv6 serverConfigure DHCPv6 Lite 2012 Cisco and/or its affiliates. All rights reserved.SPADVROUTE v1.0-#16Visual Objective for Lab 6-3: Implement Tunnels for IPv6Team zPod yPod xCExCEyPExPEyP1

P2

Configure static 6in4 tunnelConfigure 6RD CEConfigure static 6in4 tunnelConfigure 6RD Border RelayConfigure 6RD CE

2001:db8:100:y::1/64The IPv6 network presenting the IPv6 Internet 2012 Cisco and/or its affiliates. All rights reserved.SPADVROUTE v1.0-#17Password Recovery on Cisco IOS and IOS XE Software 2012 Cisco and/or its affiliates. All rights reserved.SPADVROUTE v1.0-#18Prepare for Password Recovery

1. Not able to access the Cisco IOS device:Forgotten passwordTerminal Server

Administrator

InternetSSHConsoleCE1>enablePassword: Password: Password: % Bad passwords

CE1>Sentry Switched CDU Version 6.0kUsername: ccnxPassword: redhatLocation: BORG 239 Row B2Switched CDU: list outlets Outlet Outlet ID Name .AA1 SW1-TEAM1 .AA2 SW2-TEAM1 .AA3 SW12-TEAM1 .AA4 CE1-TEAM1 .AA5 CE2-TEAM1 2. Access RPDU and list outlets3. Find outlet ID for CE1 routerME340xC2900

asr1001Remote Power Distribution Unit (RPDU)

2012 Cisco and/or its affiliates. All rights reserved.SPADVROUTE v1.0-#Power Cycle of the Cisco IOS Router or Switch

Administrator

Remote Power Distribution Unit (RPDU)System Bootstrap, Version 15.0(1r)M9, RELEASE SOFTWARE (fc1)Technical Support: http://www.cisco.com/techsupportCopyright (c) 2010 by cisco Systems, Inc.

Total memory size = 2560 MB - On-board = 512 MB, DIMM0 = 2048 MBCISCO2901/K9 platform with 2621440 Kbytes of main memoryMain memory is configured to 72/72(On-board/DIMM0) bit mode with ECC enabled

Readonly ROMMON initializedrommon 1 > Switched CDU: reboot .AA4

Outlet Outlet Outlet Control ID Name Status State

.AA4 CE1-TEAM1 Off Reboot

Command successful4. Power off and power on outlet ID .AA45. Observe text that appears on the console6. Send break sequence to the consoleCtrl-Shift-6, Ctrl-bC2900 2012 Cisco and/or its affiliates. All rights reserved.SPADVROUTE v1.0-#Power Cycle of the Cisco IOS XE Router

Administrator

Remote Power Distribution Unit (RPDU)Initializing Hardware ...Calculating the ROMMON CRC ... CRC is correctSystem Bootstrap, Version 15.0(1r)S, RELEASE SOFTWARE Copyright (c) 1994-2010 by cisco Systems, Inc.Current image running: Boot ROM1Last reset cause: PowerOnASR1000-1RU platform with 4194304 Kbytes of main memory

autoboot: aborted due to user interruptrommon 1 > Switched CDU: reboot .AA6 Outlet Outlet Outlet Control ID Name Status State .AA6 ASR1K-PE2-TEAM1_PS0 Off Reboot Command successfulSwitched CDU: reboot .AA7 Outlet Outlet Outlet Control ID Name Status State .AA7 ASR1K-PE2-TEAM1_PS1 Off Reboot Command successful4. Reboot two outlets.5. Observe text appears on the console6. Send break sequence to the console

asr1001ASR 1001 has redundant power suppliesCtrl-Shift-6, Ctrl-b 2012 Cisco and/or its affiliates. All rights reserved.SPADVROUTE v1.0-#Password Recovery Procedure on theCisco IOS and IOS XE Software

Administrator

--- System Configuration Dialog ---Would you like to enter the initial configuration dialog? [yes/no]: noPress RETURN to get started!Router>enableRouter#copy startup-config running-configDestination filename [running-config]? 2446 bytes copied in 0.228 secs (10728 bytes/sec)CE1#configure terminalEnter configuration commands, one per line. End with CNTL/Z.CE1(config)#enable password ciscoCE1(config)#config-register 0x2102 CE1(config)#interface GigabitEthernet 0/0CE1(config-if)#no shutdown CE1(config-if)#endCE1#copy running-config startup-configDestination filename [startup-config]? Building configuration...[OK]CE1#rommon 1 > confreg 0x2142

You must reset or power cycle for new config to take effectrommon 2 > reset7. Change configuration register10. Do not enter initial configuration dialog9. Observe boot sequence8. Reset system14. Enable interfaces13. Change config-register12. Change enable password11. Load configuration from startup-config15. Save configuration 2012 Cisco and/or its affiliates. All rights reserved.SPADVROUTE v1.0-# 2012 Cisco and/or its affiliates. All rights reserved.SPADVROUTE v1.0-#23