1
Company policy is one of constant improvement and therefore changes in specifications may be made without notice and without incurring liability.Please refer to www.toro.com.au Toro Australia Pty Ltd, 53 Howards Road, Beverly, South Australia, 5009. Phone 1300 130 898, fax (08)8243 2488. A.B.N 47 001 310 443 150 Spears Manifold and Fittings Ordering Information Code Description MA0101-010-2-A 2 Port Manifold MA0101-010-3-A 3 Port Manifold MA0101-010-4-A 4 Port Manifold MA0101-010BT-A Tee Swivel x MBSP x Swivel MA0109-010BT-A Tee Slip x MBSP x Swivel MA0602-010BT-A Elbow MBSP x Swivel MA0603-010BT-A Elbow Swivel x Swivel MA2004-010BT-A Cross Swivel x MBSP x Swivel x Swivel MA2903-010-A Coupling Swivel x Swivel MA2907-010BT-A Coupling Swivel x MBSP MA2908-010-A Coupling Swivel x Slip MA4800-010-A Spears Cap FBSP MA8306-010BT-A O’ Ring Nipple MBSP x MBSP MA-214-A O’ Ring Suit Spears Swivels B-218-A O’ Ring Suit Spears Nipples Two, three and four port manifolds for use in residential automatic 25mm control systems. Features • High strength glass filled HDPE construction – superior impact and freeze resistance over PVC manifolds • Pressure Rating: 1034 kPa at 20°C • O-ring sealed swivel connections – require no thread sealant and allows hand tight assembly for positive seal • 25mm male and female BSP threads Benefits • Easy to install – no cutting, no glueing, no thread tape – saves time • Makes the valve assembly neat • Additional valves can be added conveniently • Valves can be removed without cutting the valve manifold which speeds up the process of replacing faulty or damaged valves • No glueing means the valve manifold can be pressurised immediately • Swivel connectors mean the valve manifold takes up less room Typical 3 port manifold Valve Assembly MA2908-010-A Manifold Tee MA0101-010BT-A MA0109-010BT-A MA2004-010BT-A MA0602-010BT-A MA0603-010BT-A MA2004-010BT-A MA2903-010-A MA4800-010-A MA8306-010BT-A 25 mm FBSP O-Ring sealed swivel connectors Large self retaining O-Ring seal 25 mm MBSP connection High strength glass reinforced HDPE construction

Spears Manifold and Fittings - ToroSpears Manifold and Fittings Ordering Information Code Description MA0101-010-2-A 2 Port Manifold MA0101-010-3-A 3 Port Manifold MA0101-010-4-A 4

  • Upload
    others

  • View
    2

  • Download
    0

Embed Size (px)

Citation preview

  • Company policy is one of constant improvement and therefore changes in specifications may be made without notice and without incurring liability.Please refer to www.toro.com.auToro Australia Pty Ltd, 53 Howards Road, Beverly, South Australia, 5009. Phone 1300 130 898, fax (08)8243 2488. A.B.N 47 001 310 443150

    Spears Manifold and Fittings

    Ordering Information

    Code Description

    MA0101-010-2-A 2 Port Manifold

    MA0101-010-3-A 3 Port Manifold

    MA0101-010-4-A 4 Port Manifold

    MA0101-010BT-A Tee Swivel x MBSP x Swivel

    MA0109-010BT-A Tee Slip x MBSP x Swivel

    MA0602-010BT-A Elbow MBSP x Swivel

    MA0603-010BT-A Elbow Swivel x Swivel

    MA2004-010BT-A Cross Swivel x MBSP x Swivel x Swivel

    MA2903-010-A Coupling Swivel x Swivel

    MA2907-010BT-A Coupling Swivel x MBSP

    MA2908-010-A Coupling Swivel x Slip

    MA4800-010-A Spears Cap FBSP

    MA8306-010BT-A O’ Ring Nipple MBSP x MBSP

    MA-214-A O’ Ring Suit Spears Swivels

    B-218-A O’ Ring Suit Spears Nipples

    Two, three and four port manifolds for use in residential automatic 25mm control systems.

    Features

    • High strength glass filled HDPE construction – superior impact and freeze resistance over PVC manifolds

    • Pressure Rating: 1034 kPa at 20°C

    • O-ring sealed swivel connections – require no thread sealant and allows hand tight assembly for positive seal

    • 25mm male and female BSP threads

    Benefits

    • Easy to install – no cutting, no glueing, no thread tape – saves time

    • Makes the valve assembly neat

    • Additional valves can be added conveniently

    • Valves can be removed without cutting the valve manifold which speeds up the process of replacing faulty or damaged valves

    • No glueing means the valve manifold can be pressurised immediately

    • Swivel connectors mean the valve manifold takes up less room

    Typical 3 port manifold Valve Assembly

    MA2908-010-A

    Manifold Tee

    MA0101-010BT-A MA0109-010BT-A MA2004-010BT-A

    MA0602-010BT-A MA0603-010BT-A

    MA2004-010BT-AMA2903-010-A

    MA4800-010-A MA8306-010BT-A25 mm FBSP O-Ringsealed swivel connectors

    Large selfretainingO-Ring seal

    25 mmMBSPconnection

    High strength glassreinforced HDPE construction