SPEC GUIDE FLEX™ SYSTEM

FLEX™ SYSTEMFor installation on top of any flooring surfaceSP

EC G

UID

E

Updated02.12.2021

HOW WE CAN HELP

Online

General Info & Questions

Design Team Services

Build your own Flex raceway system using our innovative web tool on the Connectrac website!

Click around and play in this online experience while learning the basics of how Flex works.

connectrac.com/build-your-own

Connectrac® believes in providing exceptional customer service by offering unique resources like our Design Team.

These industry specialists are available to help you specify the best Flex solution for your next project.

connectrac.com/design-services

Contact us any time! | 877.480.5637 | [email protected] | connectrac.com

TABLE OFCONTENTS

What is Flex?How it WorksGet StartedFlex Data Capacity

Pg 4Pg 6Pg 8Pg 9

HUDDLE

MEET

WORK

FLEX SYSTEMFor installation on top of any flooring surface

Available inthese finishes:

Silver (SV)

Dark Gray (DG)

*Silver finish shown here

Optional finish

Standard finish

Connectrac® Flex is...A floor-based power and data distribution system that allows users to quickly add connectivity or change power locations in a snap.

Any Space. Any Building. Any Time.™

4

Interchangeable Power DevicesQuickly snap into any Power Hub location

Connects Powertracs & provides access for power devices

Top Cover & Transition Ramps

(included with raceway)

Entrance Fitting

Raceway Powertrac

Power Hub

Pre-wired raceway segment

Data Device Explore the graphic to learn more about the Flex system for installation on top of any flooring surface.

HOW IT WORKS

A

B

C

C

Snaps into the raceway to provide data

connectivity

Quick connector powers entire raceway & allows

data to enter

6

0-6 cables

7-24 cables

25-42 cables

How much data do you need?

Turn to Next Page

Turn to Page 16

Turn to Page 22

Typical for conference rooms

Typical for up to 12 workstations

Typical for up to 21 workstations

Plan Flex Raceway System

Optimize Your Raceway Increase your system’s adaptability by adding more points of power access.

GET

STA

RTED

What is the current use of this space? What else might it be used for in the future? How might furniture be rearranged?

TIP: Visualize how your space might adapt and evolve over time.

GOOD

BETTER

BEST4

POWER HUBS

3POWER

HUBS

2POWER

HUBS

3’ 3’ 3’

3’6’

6’ 6’

3’

3’

FLEX DATA C

APACITY

TIP: For greater flexibility at minimal cost, add more Power Hubs and connect shorter Powertracs.

Power Hubs = access points for power devices

8 9

FLEX EXAMPLE RUN

1

22

11

1

In-Wall Entrance Fitting(15’ pre-wired conduit)

4’ Powertrac - SilverPower Hub

HubcapReceptacle Device (2-circuit 1, 2-circuit 2)

Data Device

A1.15

B.ON1.SV.4B.HUB

C.HUBCAPC.PW1.12

C.DT2

QTY DESCRIPTIONFLEX CODE

FLEX 0-6 Data C

ablesFlex 0-6 Data Cables

Included with every raceway order:

Top Covers

Transition RampsEnd Ramps

Entrance FittingA

Raceway B

DevicesC

PowertracB.ON1.SV.4

In-Wall Entrance Fitting

A1.15

PowertracB.ON1.SV.4

Power HubB.HUB

Power HubB.HUB

HubcapC.HUBCAP

Data DeviceC.DT2

Receptacle Device

C.PW1.12

In-Wall Entrance Fitting Surface-Mounted Entrance Fitting

Entrance FittingA Choose how your Flex raceways start at the wall.

Wall Entrance Fitting

A1A2

A

Transition accessories included

Surface-Mounted Entrance FittingIn-Wall Entrance Fitting A2.__A1.__

DESCRIPTIONDESCRIPTION FLEX CODEFLEX CODE

Use when cabling is running OUTSIDE the wall:Use when cabling is running INSIDE the wall:

A2.3A2.15A2.30

A1.15A1.30

3’ pre-wired conduit, 2’ Walltrac15’ pre-wired conduit, 12’ Walltrac30’ pre-wired conduit, 12’ Walltrac

15’ pre-wired conduit30’ pre-wired conduit

Base Trim included

TIP: Use A2.3 to connect to existing wall outlet boxes.

1110

Powertracs Power Hub

RacewayB Continue to build your raceways by connecting Powertracs and Power Hubs.

TIP: For greater flexibility at minimal cost, add more Power Hubs and

connect shorter Powertracs.

*Powertrac measurements are based on the on-center distance between the Entrance Fitting and/or Power Hubs.

Power Hub

B.ON1.EXT

B.ON1.90

B.HUB

DESCRIPTIONFLEX CODE

Powertrac

Powertrac Extender

Powertrac Corner

Power HubPowertrac Extender

Powertrac Corner


Adds 6” to any of our standard Powertrac lengths

Allows raceway to make a 90° turn

Power Hub4’ Powertrac*4’ Powertrac* Power HubB

FLEX

0-6

Dat

a C

able

s

B.ON1.__


Powertrac

Dark GrayOptional finish Length

SilverStandard finish

Powertrac

Pre-wired raceway segments available in multiple finishes and standard lengths:

B.ON1.DG.2B.ON1.DG.3B.ON1.DG.4B.ON1.DG.5B.ON1.DG.6

B.ON1.SV.2B.ON1.SV.3B.ON1.SV.4B.ON1.SV.5B.ON1.SV.6

2 ft3 ft4 ft5 ft6 ft

Top Covers & Ramps included

FLEX 0-6 Data C

ablesEquip your Flex raceway system with power & data devices.

C.HUBCAP

C.PW1.__

C.PW2.4

Power Devices

DevicesCChoose which devices (if any) you want to snap into your Power Hubs.


Creates a walkable surface and makes power easily accessible for future needs

4-circuit monument that connects to most furniture base feeds

*Controlled devices available (see Technical Guide for more details)

C.PW1.11C.PW1.22C.PW1.33C.PW1.44C.PW1.12*C.PW1.34*C.PW1.14*

All circuit 1All circuit 2All circuit 3All circuit 42-circuit 1, 2-circuit 22-circuit 3, 2-circuit 42-circuit 1, 2-circuit 4

Receptacle Device

Hardwire Device

Hubcap

Power devices are all interchangeable and can be hot-swapped

when desired.

Hubcap

Receptacle Device

Hardwire Device

Hubcap Receptacle DeviceC

Power Hub Power Hub

Quad device available in various 4-circuit options:

12 13

8’-0”

4’-0” 4’-0”

WALL

9.4”


FLEX

0-6

Dat

a C

able

s FLEX 0-6 Data C

ablesData Devices

DevicesCThese devices go anywhere on the raceway.

Data DeviceC

Equip your Flex raceway system with power & data devices.

C.DT1

C.DT2


Allows cables to enter/exit raceway

Fits up to 8 low-voltage keystone modules

Grommet

Data Device

Data DeviceGrommet

Optional Accessories Enhance your raceways with these additional options.

Extra HubcapVertical Wire Manager Rough-In Frame

VWM

RIF

C.HUBCAP


Attaches to any power or data device to manage cabling

Installed before drywall to provide a rough opening for cabling


Vertical Wire Manager

Rough-In Frame

Extra Hubcap

Accessories

Complete Raceway Shown with Top Covers, Transition Ramps, and End Ramps installed.

Data devices easily snap next to any

power device.

14 15

FLEX EXAMPLE RUN: 7-24 Data Cables

1

22

11

1


4’ Powertrac - SilverPower Hub


Data Device

A1.15

B.ON2.SV.4B.HUB

C.HUBCAPC.PW1.12

C.DT2

$$$

$$$$$$

$$$$$$

$$$

QTY DESCRIPTIONFLEX CODE PRICE

FLEX 7-24 Data C

ables

Entrance FittingA

Raceway B

DevicesC

Flex 7-24 Data Cables

PowertracB.ON2.SV.4


A1.15

PowertracB.ON2.SV.4

Power HubB.HUB

Power HubB.HUB

Data DeviceC.DT2

HubcapC.HUBCAP

Receptacle DeviceC.PW1.12


Top Covers

Data Channel

Transition Ramps

End Ramps


Entrance Fitting


A1A2

A





A2.3A2.15A2.30

A1.15A1.30



Base Trim included


A Choose how your Flex raceways start at the wall.

1716

Hubcap Receptacle DeviceC

Power Hub Power Hub

B.ON2.__

B.ON2.EXT

B.ON2.90





FLEX

7-2

4 D

ata

Cab

les

Power Hub4’ Powertrac*4’ Powertrac* Power HubB

Top Covers, Data Channel & Ramps included

Datatrac Corner

included

FLEX 7-24 Data C

ablesPowertracs Power Hub

RacewayB



Power HubB.HUB


Powertrac

Powertrac Extender

Powertrac Corner


Powertrac Corner




Powertrac



Powertrac


C.HUBCAP

C.PW1.__

C.PW2.4

Power Devices






Receptacle Device

Hardwire Device

Hubcap


when desired.

Hubcap

Receptacle Device

Hardwire Device

Continue to build your raceways by connecting Powertracs and Power Hubs.






18 19

Data DeviceC

8’-0”

4’-0” 4’-0”

WALL13.4”


FLEX 7-24 Data C

ablesFLEX

7-2

4 D

ata

Cab

les

Data Devices

DevicesC

C.DT1

C.DT2


Allows cables to enter/exit racewayGrommet

Data Device

Data DeviceGrommet

Data Devices easily snap next to any Power Device.

Optional Accessories


VWM

RIF

C.HUBCAP






Rough-In Frame

Extra Hubcap

Accessories

Complete Raceway



Enhance your raceways with these additional options.

Shown with Top Covers, Transition Ramps, and End Ramps installed.

These devices go anywhere on the raceway.

20 21

FLEX EXAMPLE RUN: 25-42 Data Cables

1

22

11

2


4’ PowertracPower Hub


Data Device

A1.15

B.ON3.SV.4B.HUB

C.HUBCAPC.PW1.12

C.DT2

$$$

$$$$$$

$$$$$$

$$$

QTY DESCRIPTIONFLEX CODE PRICE

FLEX 25-42 Data C

ables

Entrance FittingA

Raceway B

DevicesC

Flex 25-42 Data Cables

PowertracB.ON3.SV.4

PowertracB.ON3.SV.4

Power HubB.HUB

Power HubB.HUB

Data DeviceC.DT2

ReceptacleDevice

C.PW1.12


A1.15

HubcapC.HUBCAP



Entrance Fitting


A1A2

A





A2.3A2.15A2.30

A1.15A1.30



Base Trim included


Top Covers

Data Channels

Transition Ramps

End Ramps

A Choose how your Flex raceways start at the wall.

2322


FLEX

25-

42 D

ata

Cab

les

$$$

HubcapPower Hub4’ Powertrac*4’ Powertrac* Power Hub

Receptacle DeviceCB

Power Hub Power Hub

Datatrac Corners included

B.ON3.EXT

B.ON3.90

B.ON3.__




FLEX 25-42 Data C

ablesPowertracs Power Hub

RacewayB



Power HubB.HUB


Powertrac

Powertrac Extender

Powertrac Corner


Powertrac Corner




Powertrac



Powertrac


C.HUBCAP

C.PW1.__

C.PW2.4

Power Devices






Receptacle Device

Hardwire Device

Hubcap


when desired.

Hubcap

Receptacle Device

Hardwire Device

Top Covers, Data Channels & Ramps included

Continue to build your raceways by connecting Powertracs and Power Hubs.






24 25

Data DevicesC

8’-0”

4’-0” 4’-0”

WALL

17.4”


FLEX 25-42 Data C

ablesFLEX

25-

42 D

ata

Cab

les

Data Devices

DevicesC

C.DT1

C.DT2


Allows cables to enter/exit racewayGrommet

Data Device

Data DeviceGrommet

Optional Accessories


VWM

RIF

C.HUBCAP






Rough-In Frame

Extra Hubcap

Accessories

Complete Raceway



Enhance your raceways with these additional options.

Shown with Top Covers, Transition Ramps, and End Ramps installed.

These devices go anywhere on the raceway.

Data devices easily snap next to any

power device.

26 27

Documents

SPEC GUIDE FLEX™ SYSTEM