Upload
reinpoly
View
219
Download
0
Embed Size (px)
Citation preview
8/12/2019 Speccoats_AntiCorrosiveBrochure
1/36
Protective &Anti-Corrosive CoatingsEXPERT SOLUTIONS FOR COATINGS & APPLICATIONS
8/12/2019 Speccoats_AntiCorrosiveBrochure
2/36
Profile
Speccoats has been manufacturing and distributing
paint coatings and application equipment to the market
since 1997.
Our Range
Automotive & Light Industrial
Decorative Coatings
Equipment
Floor Coatings
FRP Gratings
Furniture & Shop Fitting Finishes
Maintenance, Repair and Overhaul Systems
Pipeline Industry
Protective & Anti-Corrosive Coatings
Specialized Industrial Coatings
Product Data Sheets and Material Safety Data Sheets available on our website.Visit www.speccoats.co.za
For more information on our product range and for technical supportplease contact our technical department: 0861 37 2468
8/12/2019 Speccoats_AntiCorrosiveBrochure
3/36
The information and images contained in this brochure are intended as a guide only.Please refer to the datasheet for each individual product for full instructions.
Index pg
Colour Standards 4
Surface PreparationDegrees of Cleanliness 5
Mechanical Removal of Surface Contaminants 6
Products for Removal of Surface Contaminants 7
Protective & Anti-Corrosive CoatingsAcrylics 9
Alkyds 10
Cementitious 12
Chlorinated Rubbers 13
Ceramic Epoxies 14
Mastic Epoxies 15
Phenolic Epoxies 15
Solvented Epoxies 16
Solventless Epoxies 19
Glass Flake 20
High Temperature Coatings 21
Polyureas 23
Polyurethane/Urea 23
Polyurethanes 24
Vinyls 27
Zinc Coatings 28
EquipmentTesting Equipment 30
Application Equipment 33
8/12/2019 Speccoats_AntiCorrosiveBrochure
4/36
Colour Standards
4
RAL
NCS is the understandable international colour order system for colourselection, specification, communication and the control of colour indesign, architecture, research, marketing and manufacturing.
The NCS system is based on how people see colour. This colour rangeconsists of close to 2000 colours.
Since 1927 RAL has created a concise language when it comes to theuse of colour. We have standardized colour numbers and names for allRAL colours.
RAL Colour standards are being used in the coatings industry.
The South African Bureau of Standards colour system is a system all
paint manufacturers & applicators recognize.
It is a colour coding system used by many industries.
NCS
SABS
8/12/2019 Speccoats_AntiCorrosiveBrochure
5/36
Degrees of Cleanliness of Blast Cleaned Surfaces
Condition of Steel
Grade A Grade B Grade C
This is often referred to as whip blasting.Cleaning to this standard required that loose mill scale,loose rust and foreign matter are removed.
Grade A Grade B Grade C
Steel where mill scalehas started to flakeand light rustingoccurs
Steel where all millscale has flaked offand complete rustinghas taken place
Steel where pittingand complete rustinghas occurred
Specs:Sa 1, NACE-4 and SSPC-SP-7
Grade A Grade B Grade C
Specs:Sa 2, NACE-3 and SSPC-SP-6
Cleaning to this standard requires that mill scale, rust and foreignparticles are substantially removed and that grey metal is visible.
Cleaning to this standard requires that mills scale, rust and foreignparticles are removed to such a degree that the only traces remainingare slight stains in the form of spots or strips
Grade A Grade B Grade CSpecs:Sa 2 1/2, NACE-2 and SSPC-SP-10
Cleaning to this standard requires the entire removal of all mill scale,all rust and all foreign particles. The cleaned surface shall have auniform metallic colour.
Grade A Grade B Grade CSpecs:Sa 3, NACE-1 and SSPC-SP-5
Near White Blast Cleaning
White Metal Blast Cleaning
5
Surface Preparation
Light Blast Cleaning
Medium Blast Cleaning
8/12/2019 Speccoats_AntiCorrosiveBrochure
6/36
Surface PreparationMechanical Removal of Surface Contaminants
6
Needle/Chisel De-scalingA needle gun has a set of very fine chisels known as needles. The toolforces these needles against a work surface at variable speeds up toaround 5000 times per minute by means of compressed air.
Removes rust, loose mill scale & paint leaving bare metal
A process of forcibly propelling a stream of abrasive material against a
surface under high pressure which removes surface contaminants andprovides a clean, keyed surface for coating.
Blast PotsHoseNozzlesVacu BlastBlasting Safety EquipmentHollow BlastSpin Blast
Abrasive Blast Cleaning
Grinders, Pneumatic Sanders & AbrasivesUsed to remove rust, contamination, mill scale, weld spatter and togrind and fettle high points smooth and round so paint can adhere.This method also provides a sufficient profile for certain coatings.
Abrasive Sheets/Sandpaper
Abrasive DiscsAbrasive Flap WheelsAbrasive PadsAbrasive Blasting MaterialsGrindersPneumatic sanding Machines
Water Jetting is a surface preparation method which uses high-energywater to remove coatings, corrosion products and other surfacecontamination such as oil/grease/dust/grime/grease etc. The energyof the water striking the surface is used to achieve its cleaning affect.Water jetting does not provide a surface profile like abrasive blasting,and flash rusting will occur immediately. In this case, specialist coatingsystems are required.
Blast PotsHoseNozzlesVacu BlastBlasting Safety EquipmentHollow BlastSpin blast
Water Jetting
8/12/2019 Speccoats_AntiCorrosiveBrochure
7/36
Sponge Scotchbrite
Pad Brushes Rollers
ConventionalSpray
AirlessSpray Pour Trowel
Squeegee Spray
Surface Preparation
7
Surface Contamination Removal
Galvanized Iron Cleaner Hydrosolve
Paint Stripper
A ready to use, single pack and non mixing liquid designed to reactwith & clean galvanized iron.
Emulsifies grease and oil on the surface.Rinsed off with drinking quality water
A ready to use, single-pack, water/detergent solvented degreaser thatquickly dissolves grease & oils off all surfaces.
Used to degrease components prior to paintingRemoves all mineral oils, cutting oils & light greases from the surfacesleaving the surfaces clean for paintingWill lift freshly painted enamels & undercoats
A ready to use, single pack liquid in a heavy paste form designed toremove old paint films from a variety of surfaces.
Easy to use
GalvKleen PasteA ready to use, single-pack paste which utilizes a abrasive &detergent mixture to clean galvanized iron.
Emulsifies with water to provide a water-break-free surface after
rinsing with drinking quality water
A ready to use, single-pack, solvented degreaser that quickly
dissolves grease & oils off metal surfaces.
Used to degrease metal sheet work prior to painting.Removes all mineral oils, cutting oils & light greases from the surfacesleaving the surfaces clean for painting
Steel & Plate DegreaserA dilute etch solution in a liquid form designed for removal of
cement laitance.
Rinsed off with drinking quality waterNeutralised with Speccoats Concrete Neutraliser
Concrete Etch
Kit Size (L) Application Colour Product Type
1, 5 and20 Litre
GreenDetergent &
Acid based Liquid
Kit Size (L) Application Colour Product Type
1, 5 and20 Litre
Red OxideDetergent & Abrasive
mixture paste
Kit Size (L) Application Colour Product Type
1, 5 and20 Litre
ClearSolvent-Based
thin liquid
Kit Size (L) Application Colour Product Type
1, 5 and20 Litre
BlueWater/Detergent
solvent based
Kit Size (L) Application Colour Product Type
0.5, 1 and5 Litre
Clear Paint Remover
Kit Size (L) Application Colour Product Type
1, 5 and20 Litre
Clear Acid Etch Solution
8/12/2019 Speccoats_AntiCorrosiveBrochure
8/36
Sponge Scotchbrite
Pad Brushes Rollers
ConventionalSpray
AirlessSpray Pour Trowel
Squeegee Spray
Surface PreparationSurface Contamination Removal
Dust & Debris Removal
Protecting
It often accurs that a surface is dusty, greasy, dirty or generallycontaminated.
Brooms and BrushesCleaning RagsTack RagsMops
Scotchbrite SpongesVacuum SystemsAir Guns
When it comes time to paint, the job can get messy, we sell thefollowing products to help protect surfaces which need tostay clean.
Masking Tape
Static Plastic Sheeting (Fine plastic sheeting which adheres statically tosurfaces without the use of masking tape)Plastic Drop Sheets
Concrete Neutraliser
Chlor*Wash
A powder which is dissolved in a prescribed quantity of water & pouredon an acid etched surface to neutralize any remaining acid.
Rinsed off with drinking quality waterBrings acidic levels to a neutral level prior to applying coatings
An organic bonding chemical blend which aids in the removal of chlo-rides, sulphates & surface reacted salts.
Highly concentrated
Very cost effective & easy solution to removing chlorides, sulphates &surface reacted salts
Kit Size (L) Application Colour Product Type
1, 5 and20 Litre
WhitePowder
Neutralizer
Kit Size (L) Application Colour Product Type
0.5, 1 and5 Litre
Blue Chemical Blend
8
8/12/2019 Speccoats_AntiCorrosiveBrochure
9/36
Acrylics
Water Based Galvanized PrimerA one component water based primer for galvanizedmetallic substrates.
Excellent adhesion to galvanized metallic substrates including suitablyprepared hot-dip galvanized substratesExcellent adhesion to ceramic and plastic materialsContains a unique blend of anti-corrosive pigments which retard
corrosion of metallic substratesCan be over coated with water-based and solvent-based topcoats
Kit Size (L) Application Colour Product Type
5 and20 Litre
Red Oxideand Grey
Acrylic Co- PolymerEmulsion
Water Based Metal PrimerA one component water based primer for metallic substrates.
Excellent adhesion to galvanized metallic substrates including suitablyprepared hot-dip galvanized substrates
Excellent adhesion to ceramic and plastic materialsContains a unique blend of anti-corrosive pigments which retardcorrosion of metallic substratesCan be over coated with water-based and solvent-based topcoats
Kit Size (L) Application Colour Product Type
5 and20 Litre
Red Oxideand Grey
Acrylic Co- PolymerEmulsion
Sponge Scotchbrite
Pad Brushes Rollers
ConventionalSpray
AirlessSpray Pour Trowel
Squeegee Spray
Protective & Anti-Corrosive Coatings
9
8/12/2019 Speccoats_AntiCorrosiveBrochure
10/36
Sponge Scotchbrite
Pad Brushes Rollers
ConventionalSpray
AirlessSpray Pour Trowel
Squeegee Spray
Protective & Anti-Corrosive CoatingsAlkyds
10
QD EnamelA one component quick drying gloss enamel suitable for many
production items such as conveyor idlers, gas cylinders, automobileparts steel drums, steel furniture etc.
Items sprayed with this finish are immediately attractiveFast drying for quick turnaround timesAvailable in aluminium finishAvailable as ready for use (spraying viscosity)
Kit Size (L) Application Colour Product Type
5, 20 and200 Litre
RAL, NCSand SABS
Modified Alkyd
AD EnamelA one component synthetic solvented air drying enamel, used asgeneral purpose enamel for spraying truck bodies, trucks, buses,general transport, farm implements, garden furniture and wherever ahigh gloss, durable finish is required on either metal or woodwork.
Good quality gloss finishDust free in 40-50 minutes
Good durability in exterior exposure conditions
Kit Size (L) Application Colour Product Type
5, 20 and200 Litre
RAL, NCSand SABS
Modified Alkyd
Alkyd Metal PrimerA one component solvented zinc phosphate alkyd primer for metallicsubstrates. Used as a universal primer on a variety of substrates.
Excellent adhesion to metallic substrates including
hot dip galvanized substratesExcellent adhesion to ceramic and plasticExcellent exterior durability and corrosion resistanceCan be over coated with emulsion and solvent based topcoats
Kit Size (L) Application Colour Product Type
5 and20 Litre
Red Oxideand Grey
Alkyd Zinc Phosphate
QD Zinc Phosphate PrimerA one component solvented, fast drying zinc phosphate anti-corrosive
primer for use under QD Enamels and AD Enamels.
Contains zinc phosphate anti-corrosive pigmentProvides corrosion resistance to steelFast drying primer for industrial systemsExcellent adhesion to abrasive blast cleaned steel
Kit Size (L) Application Colour Product Type
5, 20 and200 Litre
Red Oxide, Greyand Yellow Oxide
ModifiedAlkyd Resin
QD PrimerA one component solvented fast drying pigmented primer for useunder QD Enamel and other Industrial top coats.
Very fast dryingQuick over-coating allows for faster turnaround timesAvailable as ready for use (spraying viscosity)
Kit Size (L) Application Colour Product Type
5, 20 and200 Litre
Red Oxideand Grey
Alkyd
QD Primer Low V.O.C.A one component solvented low V.O.C. fast drying pigmented primerfor use under QD Enamel and other Industrial top coats.
Low V.O.C.
Fast drying
Kit Size (L) Application Colour Product Type
5, 20 and200 Litre
Red Oxideand Grey
Water ModifiedAlkyd
8/12/2019 Speccoats_AntiCorrosiveBrochure
11/36
Sponge Scotchbrite
Pad Brushes Rollers
ConventionalSpray
AirlessSpray Pour Trowel
Squeegee Spray
Protective & Anti-Corrosive Coatings
11
Alkyds
Universal Gloss EnamelOne component solvented, high quality universal gloss enamelfor interior and exterior applications.
Excellent finish with good weather resistanceExcellent interior and exterior durability and wash abilityHigh opacity and low odour
Kit Size (L) Application Colour Product Type
5 and20 Litre
RAL, NCSand SABS
Long Oil AlkydSolvent Based
AD EnamelA one component synthetic solvented air drying enamel, used as
general purpose enamel for spraying truck bodies, trucks, buses,general transport, farm implements, garden furniture and wherever ahigh gloss, durable finish is required on either metal or woodwork.
Good quality gloss finishDust free in 40-50 minutesGood durability in exterior exposure conditions
QD Enamel Low V.O.C.A one component low V.O.C. quick drying gloss enamel suitable formany production items such as conveyor idlers, gas cylinders,automobile parts steel drums, steel furniture etc.
Items sprayed with this finish are immediately attractiveWater Modified which lower the V.O.C.
Kit Size (L) Application Colour Product Type
5, 20 and200 Litre
RAL, NCSand SABS
Water ModifiedAlkyd
Kit Size (L) Application Colour Product Type
5, 20 and200 Litre
RAL, NCSand SABS
Modified Alkyd
QD Enamel WBA one component water-based quick drying gloss enamel suitablefor many production items such as conveyor idlers, gas cylinders,automobile parts, steel drums, steel furniture etc.
Water Based, Zero V.O.C.
Quick dryingAvailable in aluminium finishA hard, beautiful coating
Kit Size (L) Application Colour Product Type
5, 20 and200 Litre
RAL, NCSand SABS
Modified Alkyd
8/12/2019 Speccoats_AntiCorrosiveBrochure
12/36
Sponge Scotchbrite
Pad Brushes Rollers
ConventionalSpray
AirlessSpray Pour Trowel
Squeegee Spray
CementitiousProtective & Anti-Corrosive Coatings
12
Patching CompoundA blend of graded silicas and fast setting cements modified with apolymer and cure enhancing chemicals. A fast curing cementcompound for fixing holes in concrete & masonry.
Easy to use Simply add water to desired consistencyCan take light traffic after 4 hoursCan be thinned for use as a fairing compound
Cures to an extremely tough, non shrink, hard state which can be
over coated with flooring e.g. tiles the following day
Kit Size (kg) Application Colour Product Type
10 and25 kg
Dark Grey Cementitious
Irabond CR94Cementitious waterproofing compound can be used as a faring orlevelling coat on concrete or masonry prior to the application ofeither Aqualine or Polyureas.
Resists ground water back pressure for in ground structures
UK Secretary of State for the environment (DWI) ApprovedCan be used on its own to waterproof stable concrete substrates
Kit Size (kg) Application Colour Product Type
25 kg Pink Cementitious
8/12/2019 Speccoats_AntiCorrosiveBrochure
13/36
Sponge Scotchbrite
Pad Brushes Rollers
ConventionalSpray
AirlessSpray Pour Trowel
Squeegee Spray
Protective & Anti-Corrosive Coatings
13
Chlorinated Rubbers
Chlorinated Rubber PrimerOne component solvented, plasticized chlorinated rubber intermediatecoat suitable for steel structures, shipbuilding, mechanical andautomotive engineering, transportation and the protection ofbuildings in chemical plants, coastal and marine environments.
Excellent adhesionChemical resistant coating
Exhibits good flexibility and Weatherability
Kit Size (L) Application Colour Product Type
5 and 20 LitreGrey & Red
OxideChlorinated
Rubber
Chlorinated Rubber HB IntercoatOne component solvented, plasticized chlorinated rubber intermediatecoat suitable for steel structures, shipbuilding, mechanical andautomotive engineering, transportation and the protection ofbuildings in chemical plants, coastal and marine environments.
Can be built up to a high buildChemical Resistant coatingExhibits good flexibility and Weatherability
Chlorinated Rubber Enamel FinishcoatOne component solvented, plasticized chlorinated rubber enamel
finishcoat suitable for steel structures, shipbuilding, mechanical andautomotive engineering, transportation and the protection ofbuildings in chemical plants, coastal and marine environments.
Chemical Resistant coatingExhibits good flexibility and Weatherability
Kit Size (L) Application Colour Product Type
5 and 20 Litre Light GreyChlorinated
Rubber
Kit Size (L) Application Colour Product Type
5 and 20 Litre VariousChlorinated
Rubber
8/12/2019 Speccoats_AntiCorrosiveBrochure
14/36
Sponge Scotchbrite
Pad Brushes Rollers
ConventionalSpray
AirlessSpray Pour Trowel
Squeegee Spray
Protective & Anti-Corrosive Coatings
14
Kit Size (L) Application Colour Product Type
0.75 and4 Litre
White Ceramic Filler Epoxy
Irathane CC4500A 100% Solids, two component ceramic filled epoxy, for directapplication to concrete or steel.
SANS 1217 Type 1BCertified per ANSI/NSD Standard 61Excellent abrasion resistanceProduces hard slick surfaces
Resistant to dilute acids & alkalis
Ceramic Epoxies
Devcon Brushable CeramicCeramic filled, brushable epoxy the provides a smooth protectivebarrier against abrasion, erosion and chemical attack.
Low friction surface for operation efficiencyRebuilds and seals heat exchanger tubes and protects pumpcasings and flange faces
Kit Size (gm) Application Colour Product Type
500 gmRed, Blueand White
Ceramic Epoxy
Devcon Sprayable CeramicA reinforced Sprayable, ceramic epoxy, which is chemically resistant forsurfaces that require an exceptionally smooth finish.
Very low friction surface
Protects tanks, pumps, blades, valves etc exposed toerosion and corrosion
Kit Size (kg) Application Colour Product Type
10 kgBlue and
GreyCeramic Epoxy
Online Brushable CeramicA reinforced Sprayable, ceramic epoxy, which is chemically resistant for
surfaces that require an exceptionally smooth finish.
Very low friction surfaceProtects tanks, pumps, blades, valves etc exposed toerosion and corrosion
Kit Size (kg) Application Colour Product Type
10 kgBlue and
GreyCeramic Epoxy
8/12/2019 Speccoats_AntiCorrosiveBrochure
15/36
Sponge Scotchbrite
Pad Brushes Rollers
ConventionalSpray
AirlessSpray Pour Trowel
Squeegee Spray
Protective & Anti-Corrosive Coatings
15
Phenolic Epoxies
Kit Size (L) Application Colour Product Type
5 LitreKits Beige Phenolic Epoxy
Phenshield 3050 PrimerTwo component solvented modified phenolic, matt finished,pigmented primer that has excellent adhesion to steel andexcellent resistance to a wide range of solvents, alkalis and acidvapours when over coated with Speccoats Phenshield 3050 Finish.
Cures to a hard matt surfaceSuitable for damp, chemical environments such as pulp & paper mills
Protection against severe splash, spillage and fume conditions
Kit Size (L) Application Colour Product Type
4 LitreKits Various Phenolic Epoxy
Phenshield 3050 FinishTwo component solvented modified phenolic, pigmented finish coatwhich sets to a hard, tough finish with very good abrasion resistanceand a glossy surface which is chemically resistant and easily cleaned.
Excellent chemical resistance
Cures to a hard resilient surface which is abrasion resistantSuitable for damp, chemical environments such as pulp & paper millsProtection against severe splash, spillage and fume conditions
Pipetank 175A two component solvented phenolic epoxy formulated to provide
high acid, chemical & abrasion resistance in immersion conditions.
Up to 90C chemical immersions resistance depending upon thechemical involved
Excellent resistance to abrasion & mechanical damage
Kit Size (L) Application Colour Product Type
5, 20 and200 Litre
Grey Phenolic Epoxy
Mastic Epoxies
Kit Size (L) Application Colour Product Type
5 and20 LitreKits
Black andBrown
Coal Tar Epoxy
Pipetank Coal Tar EpoxyA two component solvented coal tar modified epoxy pigmented finishfor the protection of steel & concrete.
Self priming, high solids epoxy coatingDevelops a hard coating with a very good waterand corrosion resistanceGood chemical resistance
Good resistance to wet and salt water environments
Kit Size (L) Application Colour Product Type
5 and20 LitreKits
RAL, SABS, RedOxide and Grey
Epoxy Mastic
Pipetank 8900 Mastic EpoxyA two component solvented high solids rapid cured epoxy mastic coat-ing applied as a coating over mechanically steel or suitably preparedconcrete surface offering excellent corrosion protection.
Surface tolerant, self priming, high solids epoxy coating
Develops a hard coating with very good solventand corrosion resistanceGood resistance to chemicals and wet environments
8/12/2019 Speccoats_AntiCorrosiveBrochure
16/36
Sponge Scotchbrite
Pad Brushes Rollers
ConventionalSpray
AirlessSpray Pour Trowel
Squeegee Spray
Protective & Anti-Corrosive Coatings
16
Solvented Epoxies
Kit Size (L) Application Colour Product Type
4.5 and 20LitreKits
Water Blueand Grey
Polyamide CuredEpoxy
Pipetank 2300 RWTwo component, solvented polyamide cured epoxy formulated as ahigh performance multi-layer chemical resistant coating and liningdesigned for raw, process and mining water containment andtransport.
Applied directly onto abrasive blast cleaned steel & is self primingExcellent adhesion, permeation resistance and corrosion protection
Good flexibility and water resistance
Good chemical resistance
Pipetank 8800 HSA two component solvented high solids rapid cured epoxy pigmented
coating formulated for use as a multi layer coating and lining forcontact with Potable Water & many other liquids held in tank storage.
Applied directly onto blast cleaned steel and is self primingHigh solids enables contractor to apply higher filmthicknesses per coatGood chemical resistance and resistance to aviation fuelsIn accordance with SANS 1217 Type 1A requirement
Kit Size (L) Application Colour Product Type
4 and20 Litre
Red Oxide, Grey,Black and Water Blue
Epoxy
Pipetank 8800A two component solvented epoxy which cures with a unique rapidcure hardener formulated for use a high performance lining for pipes &tanks for immersion in Potable Water.
SANS 1217 Type 1A
Suitable for contact with Potable Water & many other liquids held intank storageVery rapid curingGood chemical resistance & resistance to aviation fuels etcImmersion temperature resistant up to 80C
Kit Size (L) Application Colour Product Type
4 and20 Litre
Water Blue& Grey
Epoxy Cured withRapid Cure Hardener
Kit Size (L) Application Colour Product Type
3 and 15LitreKits
Cl ea r Ami do -a min e Epox y
Pipetank RustbondTwo component solvented ambient curing amido-amine epoxy clearprimer formulated as a cross-linking penetrating sealer with excellentwetting properties which fixes rust to an extent that it can be overcoated.
High solids, low viscosity clear primer/sealerCures to a hard flexible coating with excellent adhesion onrusty substrates
Used as a primer/sealer for clean, oil free galvanized andconcrete surfaces
Pipetank 16 WTwo component solvented amine cured epoxy formulated as a highperformances lining for steel tanks & pipes containing hot water.
Withstands continuous immersion temperatures up to 120C & a dry
heat resistance up to 150CExcellent adhesion & corrosion protection when applied to abrasiveblast cleaned steelProvides long term protection of hot water tanks & condensatereturn tanks
Kit Size (L) Application Colour Product Type
5 and20 Litre
Red Oxide& Grey
Amine Cured Epoxy
Pipetank 2300A two component solvented polyamide cured epoxy formulated for
use as a multi-layer coating & lining on steel pipelines & tanks, forimmersion in Potable Water.
SANS 1217 Type 1AThis system has been used extensively for water pipelines in SouthernAfrica since 1973Expected service life is in excess of 20 yearsApplied directly onto blast cleaned steelExcellent adhesion, permeation resistance, corrosion protection &water resistance in immersion conditions up to 80C
Kit Size (L) Application Colour Product Type
4 and20 Litre
Water Blue& Grey
Polyamide CuredEpoxy
8/12/2019 Speccoats_AntiCorrosiveBrochure
17/36
Sponge Scotchbrite
Pad Brushes Rollers
ConventionalSpray
AirlessSpray Pour Trowel
Squeegee Spray
Protective & Anti-Corrosive Coatings
17
Solvented Epoxies
Pipetank EA 900A two component solvented amine cured epoxy primer & Finishcoatdesigned for many types of surfaces i.e. aluminium, galvanizing,steelwork, concrete, GRP and Phenolic Sheeting to provide long termcorrosion protection.
Good resistance to abrasion and mechanical damageExcellent adhesion on correctly prepared surfaces
Suitable for contact with potable water
Fully cured coating offers outstanding resistance to a wide rangeof industrial chemicals
Kit Size (L) Application Colour Product Type
5 and 20LitreKits
R ed O xide Amin e Cure d Ep ox y
Pipetank EA 900 HB Primer - IntercoatA two component solvented, high build, amine cured epoxy formulatedas a high performance general purpose primer intermediate coatfor corrosion resistance on steelwork and other metal substrates or asan intermediate coat of Speccoats Pipetank EA 900 or other priming
systems
Excellent adhesion on correctly prepared surfacesGood resistance to aqueous solutions and a wide rangeof industrial chemicals
Good resistance to abrasion and mechanical damage
Kit Size (L) Application Colour Product Type
5 and20 Litre
Grey & Buff Amine Cured Epoxy
Pipetank EA 900 HB PW Primer - IntercoatA two component solvented, high build, amine cured epoxy formulated
as a high performance primer intermediate coat suitable for contactwith Potable Water for corrosion resistance on steelwork and othermetal substrates or as an intermediate coat of Speccoats Pipetank EA900 or other priming systems.
Suitable for contact with Potable WaterExcellent adhesion on correctly prepared surfacesGood resistance to aqueous solutions and a wide rangeof industrial chemicalsGood resistance to abrasion and mechanical damage
Kit Size (L) Application Colour Product Type
4 and20 Litre
Grey & Buff Amine Cured Epoxy
Kit Size (L) Application Colour Product Type
15 LitreKitsRed Oxideand Grey
Polyamide CuredEpoxy
Pipetank 8880 PrimerA two component solvented polyamide cured epoxy zinc phosphatepigmented coating formulated as a high performance, self priming,high build anti-corrosive coating for use in shops where fastturnaround time is required.
Excellent adhesion on correctly prepared surfacesShort recoat time for fast turnaround time
High solids coating, which can be top coated using epoxies,
polyurethanes or alkyds
Pipetank EA 400A two component solvented epoxy pigmented coating formulated as alining for the protection of pipelines carrying a wide range of petro-chemical products including aviation fuel, Kerosene andcrude oil mixtures.
Recognised worldwide as the standard coating for aviation fuel linesUnaffected by crude oil mixtures, petrochemical product mixturesand most industrial chemicals
Excellent corrosion resistance under aggressive immersion conditions
Kit Size (L) Application Colour Product Type
5 and20 Litre
Re d O xide A min e Cure d Epox y
Pipetank EA 500A two component solvented high build epoxy pigmented coating
formulated as a higher build, chemical resistant protective coatingin immersion conditions. Proven resistance against a wide range ofpetroleum products.
Applied as a lining for aviation fuel tanks and vesselsGood resistance to abrasion and mechanical damageApproved worldwide for contact with aviation fuelGood resistance to a wide range of industrial chemicals and solvents
Kit Size (L) Application Colour Product Type
5 and20 Litre
Re d O xide A min e Cure d Epox y
8/12/2019 Speccoats_AntiCorrosiveBrochure
18/36
Sponge Scotchbrite
Pad Brushes Rollers
ConventionalSpray
AirlessSpray Pour Trowel
Squeegee Spray
Protective & Anti-Corrosive Coatings
18
Solvented Epoxies
Prime EA 900 Holding PrimerTwo component solvented epoxy holding / welding primer.
A general purpose holding primer on blast cleanedsteel & other metal surfacesUsed as a weld-able, prefabrication primer followedby a full painting systemProvides a high degree of corrosion protection in one thin coat
Can be over coated in up to three monthsExcellent adhesion onto correctly prepared surfaces
Kit Size (L) Application Colour Product Type
5 and 20LitreKits
Red Oxide Epoxy
Surtol AluminiumTwo component solvented, high solids, modified epoxy coatingcontaining aluminium anti-corrosive pigments developed as a highperformance coating that can be applied to hand prepared surfacesand can be over coated by various topcoats.
Used on surfaces which cannot be abrasive blast cleanedProvides good corrosion protection to wire brushed rusty steelworkExcellent adhesion and impact resistanceResistant to humidity salt water and exterior exposure conditions
Kit Size (L) Application Colour Product Type
10 Litre Kits AluminiumAluminium
Epoxy
Pipetank EA 900 HB Z/P Primer - IntercoatA two component solvented, high build, amine cured epoxy pigmentedwith zinc-phosphate anti-corrosive pigment, formulated as a highperformance primer intermediate coat for corrosion resistance onsteelwork and other metal substrates or as an intermediate coat ofSpeccoats Pipetank EA 900 or other priming systems.
Excellent adhesion on correctly prepared surfacesGood resistance to aqueous solutions and a wide rangeof industrial chemicalsGood resistance to abrasion and mechanical damage
Pipetank EA MIO Primer - IntercoatA two component solvented amine cured epoxy, pigmented with lamel-lar micaceous iron oxide which has been formulated to provide a highlyeffective barrier coating that can be used as an intermediate coat overprimers or as a maintenance coat over previously painted surface. The
lamellar MIO flakes provide excellent resistance to water permeation.
Good chemical resistance and corrosion resistanceThe MIO provides reinforcement to the film as well as enhancingabrasion and erosion resistance.
The flaky nature of the pigment provides a shielding effect against UVradiation and aggressive weathering affects
Kit Size (L) Application Colour Product Type
4 and 20Litre Kits
Red Oxide andMetallic grey
Amine CuredMIO Epoxy
Pipetank EA MIO Z/P Primer - IntercoatA two component solvented amine cured epoxy, pigmented with
lamellar micaceous iron oxide and zinc phosphate anti-corrosivepigment, formulated to provide a highly effective barrier coating thatcan be used as an intermediate coat over primers or as a maintenancecoat over previously painted surface. The lamellar MIO flakes provideexcellent resistance to water permeation.
Contains corrosion inhibiting zinc phosphate pigmentGood chemical resistance and corrosion resistanceThe MIO provides reinforcement to the film as well as enhancingabrasion and erosion resistance.The flaky nature of the pigment provides a shielding effect against UVradiation and aggressive weathering affects
Kit Size (L) Application Colour Product Type
5 and20 Litre
Grey & Buff Amine Cured Epoxy
Kit Size (L) Application Colour Product Type
4 and 20Litre Kits
Red Oxide andMetallic grey
Amine CuredMIO Epoxy
8/12/2019 Speccoats_AntiCorrosiveBrochure
19/36
Sponge Scotchbrite
Pad Brushes Rollers
ConventionalSpray
AirlessSpray Pour Trowel
Squeegee Spray
Protective & Anti-Corrosive Coatings
19
Solventless Epoxies
Pipetank 151A two component surface tolerant solvent free epoxy formulation thatprovides long-term corrosion protection to steel & concrete surfaces inimmersion conditions & can be applied under water.
Used as a repair & make good coating for existing epoxy liningsUsed as a high quality lining for tanks and pipe, applied directlyonto suitably prepared steel
Has provided good service in immersion condition for more
than 20 years
Kit Size (L) Application Colour Product Type
200 ml, 1 & 4.5 LKits &Various Cartridge Sizes
Water Blue& Grey
Solvent freeEpoxy
Pipetank 151 PWA two component surface tolerant solvent free epoxy formulation withfast curing properties. Provides long-term corrosion protection to steel& concrete surfaces in Potable Water immersion conditions & canbe applied under water.
Used as a repair & make good coating for existing epoxy liningsUsed as a high quality lining for tanks and pipe, applied directlyonto suitably prepared steelHas provided good service in immersion condition for more than 20 yrsSuitable for contact with Potable WaterConforms to SANS 1217 Drinking Water Requirement
Kit Size (L) Application Colour Product Type
200 ml, 1 & 4.5 LKits &Various Cartridge Sizes
Water Blue& Grey
Solvent freeEpoxy
Pipetank 151 RapidA two component surface tolerant solvent free epoxy formulation with
fast curing properties that provides long-term corrosion protectionto steel & concrete surfaces in immersion conditions & can be appliedunder water.
Fast cures within 2 hours @ 25C at 70% RHUsed as a repair & make good coating for existing epoxy liningsUsed as a high quality lining for tanks and pipe, applied directlyonto suitably prepared steel
Has provided good service in immersion condition for morethan 20 years
Kit Size (L) Application Colour Product Type
200 ml, 1 & 4.5 LKits &Various Cartridge Sizes
Water Blue& Grey
Solvent freeEpoxy
Pipetank 152 LV-ASTwo component solventless surface tolerant high build epoxy coatingformulated to provide long term maintenance free corrosion protectionof mild steel and other selected substrates in a single coat by airlessspray application.
Extremely high levels of adhesionProvides unparalleled combination of proven coating protectionproperties with extensive limited fire hazard contribution
Excellent resistance to abrasion and mechanical damageCan be used against a wide range of chemicals and providesexcellent resistance to sea water immersion
Kit Size (L) Application Colour Product Type
5 & 18 L Kits 120 ml,400ml& 1.2LCartridges
Selected RALColours
SolventlessEpoxy
Pipetank 162 HotcoatA two component surface tolerant solvent free epoxy formulation usedas a high quality lining for steel & concrete pipes & vessels.Provides long term corrosion protection to steel & concrete inimmersion conditions.
Can be applied 1000um thick in one applicationHighly water resistant propertiesExcellent erosion resistance when conveying slurriesHigh gloss, hard cured surface produces low friction conditionsfor pipe internals
Kit Size (L) Application Colour Product Type
200 ml, 60 & 600 L&Various Cartridge Sizes
Water BlueSolvent free
Epoxy
Pipetank 162 PW HotcoatA two component surface tolerant solvent free epoxy formulation used
as a high quality lining for steel & concrete pipes & vessels. Provideslong term corrosion protection to steel & concrete.
Can be applied 1000um thick in one applicationHighly water resistant propertiesExcellent erosion resistance when conveying slurriesHigh gloss, hard cured surface produces low friction conditionsfor pipe internalsSuitable for contact with Potable WaterConforms to SANS 1217 Drinking Water Requirement
Kit Size (L) Application Colour Product Type
200 ml, 60 & 600 L&Various Cartridge Sizes
WaterBlue
Solvent freeEpoxy
8/12/2019 Speccoats_AntiCorrosiveBrochure
20/36
Sponge Scotchbrite
Pad Brushes Rollers
ConventionalSpray
AirlessSpray Pour Trowel
Squeegee Spray
Protective & Anti-Corrosive Coatings
20
Glass Flake
Pipetank Flake Glass 1000Two component solvented high solids epoxy finish coating containingchemically resistant flake glass offering excellent corrosion andchemical resistance.
Protects steelwork in areas where high abrasion and corrosionresistance are requiredUsed in splash zones in marine conditions such as jetties,decks and bridgesOther uses include chemical plants, pulp and paper mills, watertreatment plants and mining process plants
Kit Size (L) Application Colour Product Type
5 and 20LitreKits
Red Oxideand Grey
Glass Filled Epoxy
Pipetank Flake Glass Vinyl EsterTwo component solvented epoxy vinyl ester resin containing flakeglass with a particle size C. This product is designed for the protectionof plant and structures in chemical plants, coastal and marineenvironments.
Superior resistance to abrasion and severe mechanical stress, whilegiving toughness and elongationSuperior thermal and corrosion resistance performance properties
Kit Size (L) Application Colour Product Type
5 and 20LitreKits
WhiteGlass Filled Epoxy
Vinyl Ester
Irathane Glass FlakeA range of glass flake filled vinyl ester systems suitable for lining
metallic structures containing a wide variety of chemicals and oils.
Combined high temperature and chemical resistanceRange includes products to match a wide range of cost andperformance criteriaBased on over 30 years track record of Fugi Resin Co. Ltd, systemsare available to counteract a wide variety of problems
Kit Size (kg) Application Colour Product Type
5 kg VariousGlass FilledVinyl Ester
Solventless Epoxies
Pipetank CuresealA three component water based amine cured epoxy primer/sealerformulated for use as a primer for new or existing concrete or as aconcrete curing membrane.
Excellent adhesion to green concreteSuitable for use with drinking waterExcellent sealer for machine abraded floors
Excellent adhesion to substrate & subsequent epoxy coatings
SANS 241-1217 Drinking water approval certifiedMeets ASTM 309 Requirements for use as a concrete curing compound
Kit Size (L) Application Colour Product Type
4 and20 Litre
Pale Blue Amine cured epox y
Water Based Epoxy PrimerA two component water-based epoxy primer which provides excellentadhesion to a variety of substrates.
Used as an adhesive primer on tiled or gloss surfaces,
masonry or metalUsed as an insulating coating over bituminous coatingsExcellent adhesion to suitably prepared surfacesExcellent adhesive surface for subsequent coatings of emulsionor solvent based paints
Used as a primer for solvent free wall coatings, strippable coatings
Kit Size (L) Application Colour Product Type
5 and20 Litre
Off WhiteEpoxy Amine
Emulsion
8/12/2019 Speccoats_AntiCorrosiveBrochure
21/36
Sponge Scotchbrite
Pad Brushes Rollers
ConventionalSpray
AirlessSpray Pour Trowel
Squeegee Spray
Protective & Anti-Corrosive Coatings
21
High Temperature Coatings
Silicone Acrylic FinishcoatSingle component solvented silicone acrylic pigmented finishformulated for use on suitably primed steelwork in chemicalplants and at elevated temperatures.
Provides an off gloss finish with excellent long termdurability and resistanceDesigned for use with surface temperatures from ambient to 200C
Kit Size (L) Application Colour Product Type
5 and 20LitreKits
White Silicone/ Acrylic
Silicone Aluminium Hi-Heat FinishcoatSingle component solvented, silicone pigmented finishcoat containinghigh temperature resistant aluminium.
Recommended for flues, stacks, furnaces, boilers, exhausts, jet engines
and any other metal part operating at temperatures up to 540C
Kit Size (L) Application Colour Product Type
5 and 20LitreKits
Aluminium Sil icone Aluminium
Silicone Matt Black Hi-Heat FinishcoatSingle component solvented, silicone pigmented finishcoat providing
a high temperature resistant matt black.
Recommended for flues, stacks, furnaces, boilers, exhausts, jet enginesand any other metal part operating at temperatures up to 500C
Kit Size (kg) Application Colour Product Type
5 and 20LitreKits
Matt Black Silicone
8/12/2019 Speccoats_AntiCorrosiveBrochure
22/36
Sponge Scotchbrite
Pad Brushes Rollers
ConventionalSpray
AirlessSpray Pour Trowel
Squeegee Spray
22
Protective & Anti-Corrosive CoatingsHigh Temperature Coatings
Apexior 1A single component, boiling water/steam immersion coating to 371C.
Apexior 1 is extensively and regularly used in a large number of thebest know boiler plants here and abroad, and has the unqualifiedendorsement of many leading engineers
Used for water and steam surface of boiler drums and tubes, steeltubes etc or where the internal surfaces are ordinarily hot and wet
Unaffected by pressures and high temperatures
Kit Size (L) Application Colour Product Type
PleaseEnquire
Black Organic
Apexior 3A single component, fresh / salt water immersion coating from-40C to 60C.
Formulated for the waterside corrosion prevention of metal surfaces
Resistant to continuous immersion in fresh or salt water as well asfrequently wet or high humidity environments
Kit Size (L) Application Colour Product Type
1 USGallon(3.78 Litre)
Black Organic
Thurmalox CoatingsA range of high temperature resistant coatings.
Coatings temperature resistant up to 700CHigh quality and proven performance
Kit Size (kg) Application Colour Product Type
Various Various Various Various
8/12/2019 Speccoats_AntiCorrosiveBrochure
23/36
Sponge Scotchbrite
Pad Brushes Rollers
ConventionalSpray
AirlessSpray Pour Trowel
Squeegee Spray
23
Protective & Anti-Corrosive CoatingsPolyurethane/Urea
Irathane 155A two component solvented elastomeric polyurethane/urea formulatedfor use in severe abrasion conditions and for resistance to dilute acidsand alkalis, sea water and flexural movement.
Over 30 Years successful track record in mineral processing andhydroelectric generationLong pot life allows coating of complex components (fans, rotors etc.)and the ability to vary thickness to focus cost effectively oncritical areasBonds to most metals including mild steel, cast iron, stainless steel,titanium, naval bronze etc with the correct selection of I rabond Primers
Kit Size (L) Application Colour Product Type
10 Litre2 Litre(brush)
Cream Polyurethane/ Urea
Irathane 255A two component solvented trowel applied polyurethane for theseverest abrasion applications.
Exceptional abrasion resistance
Ideal for repairs to PU or rubber components and liningsHighly elastomeric, with resistance to dilute acids and alkalis
Kit Size (L) Application Colour Product Type
4 Litreand0.75 Litre
Orange Polyurethane/Urea
Aqualine 300 300TG 400 - 650A range of 100% Solids polyurethane/urea systems for lining concrete
structures requiring a variety of approvals.
Aqualine 300 and 300 Trowel Grade (TG) for lining waste, sea waterand other non potable water containing structures
Aqualine 400 for lining of potable water structures requiring WRASlisted and other similar level national approvals
Aqualine 650 for lining potable water structures requiring Secretaryof State (DWI) and a selection of similar level national approvals
Kit Size (kg) Application Colour Product Type
Various Various Polyurethane/Urea
Polyureas
Polyurea 2000A 100% solids fast set elastomeric Polyurea combining resistance toabrasion and many dilute chemicals ideal for large areas where minimaldowntime is required.
Fast set allows cost effective application to large areas, used forwaterproofing potable water structuresUK WRAS Listed suitable for use on potable water applications
Can be used with Irabond Primes and adhesive to bond to metal
substrates as well as its normal use on concrete
1:1 Mixing Ratio
Kit Size (L) Application Colour Product Type
5 and 20LitreKits
Grey Polyurea
8/12/2019 Speccoats_AntiCorrosiveBrochure
24/36
Sponge Scotchbrite
Pad Brushes Rollers
ConventionalSpray
AirlessSpray Pour Trowel
Squeegee Spray
24
Protective & Anti-Corrosive Coatings
MS PrimerA two component solvented acrylic polyurethane primer that whencombined with a catalyst can be applied to properly preparedsubstrates as an undercoat for many suitable topcoats.
Fills many imperfections on the substrate such as scratches, chipsand minor indentationsEasily sanded once dry
Provides good anti-corrosive properties to protect underlying
metal substrates
Kit Size (L) Application Colour Product Type
1 and 5 LitreBeige
Acrylic PolyurethanePrimer
Finishprime PolyurethaneA two component solvented aliphatic isocyanate cured polyurethaneprimer/finish which contains anti-corrosive pigments and can be usedas a primer. It contains UV absorbing properties and can be used as atopcoat on itself.
Good resistance to UV and atmospheric exposureGood colour and gloss retention, with low chalking andyellowing properties
Tough and abrasion resistant
Kit Size (L) Application Colour Product Type
5 and20 Litre
Red Oxideand Grey
Polyamide CuredEpoxy
Finishcoat Polyurethane 2:1A two component solvented acrylic polyurethane finish coating.
Provides highly durable direct gloss finish coat incorporating anextensive range of performance enhancing characteristics.
Good quality, gloss, coverage and excellent flow
Kit Size (L) Application Colour Product Type
5, 20 and200 Litre
RAL, NCSand SABS
AcrylicPolyurethane
Polyurethanes
Finishcoat Polyurethane Polyester 3:1
Kit Size (L) Application Colour Product Type
1, 5 and200 Litre
RAL, NCSand SABS
AcrylicPolyurethane
A two component solvented Polyester/Polyurethane formulated for useas a top/finish coat where an exceptional finish is required.
Provides a highly durable direct gloss finish, cures to a tile like finishResistant to UV & sunlight & is Non-yellowingExcellent flexibility & durability & resistance to chalkingUnaffected by salt water or aggressive industrial environments
Good resistance to oils, fats, aqueous solution & mostindustrial chemicals
Finishcoat Polyurethane 4:1
Kit Size (L) Application Colour Product Type
1, 5 and200 Litre
RAL, NCSand SABS
AcrylicPolyurethane
A two component solvented Polyurethane formulated for use as a top/finish coat on suitably prepared surfaces.
Provides a highly durable direct gloss finish
Resistant to UV & sunlight & is Non-yellowingExcellent flexibility & durability & resistance to chalkingUnaffected by salt water or aggressive industrial environmentsGood resistance to oils, fats, aqueous solution & mostindustrial chemicals
Finishcoat Polyurethane 9:1A two component solvented aliphatic Polyurethane system suitable
for use on a wide range of steel, fibreglass and other substrates wheregood durability is required such as transformer cabinets, cranes,pumps, and valves, electric motor housings etc.
Fast drying & durable, this product is the logical alternative toAD Enamel and far outperforms QD EnamelsExhibits excellent flexibility and durability and is resistant to chalkingExcellent adhesion over epoxy primers, good corrosion andchemical resistance
Kit Size (L) Application Colour Product Type
5, 20 and200 Litre
RAL, NCSand SABS
AcrylicPolyurethane
8/12/2019 Speccoats_AntiCorrosiveBrochure
25/36
Sponge Scotchbrite
Pad Brushes Rollers
ConventionalSpray
AirlessSpray Pour Trowel
Squeegee Spray
25
Protective & Anti-Corrosive Coatings
Protec Range
Kit Size (L) Application Colour Product Type
400 LKit & VariousCartridge Sizes
VariousSolvent free
Polyurethane
A range of 100% solids, fast set, flexible, direct to metal polyurethaneswith exceptional performance properties for the internal & externalprotection of pipes with a variety of approval criteria.
SANS 1217 Type 1CProtec I Standard performance grade
Protec II Higher performance grade
Protec II AM
contains EPA registered additives for enhancedmicrobiological growth resistanceProtec II PW Certified per ANSI/NSD standard 61 for use as a liningfor Potable Water storage & pipe works
Polyurethanes
Irathane 2855-80A 100% solids hot processed polyurethane system specificallydeveloped for centrigugal lining of slurry pipelines.
Excellent chemical and abrasion resistance to most slurries
2:1 ratio quasi-prepolymer system for ease of processingSuitable for casting of abrasion resistant components
Kit Size (L) Application Colour Product Type
75 Litre Unpigmented Polyurethane
Ura-Shield 5324A 100% solids fast set, aromatic polyurethane hard-coat for the
production of seamless plastic-like protection in food handlingenvironments.
Meets ANSI/NSF Standard 51 for Food Equipment MaterialsBonds to various substrates including plywood to produceweight savings in application such as trawler holds
Kit Size (kg) Application Colour Product Type
10/110 US Gallon37,85/416.40 Litre
White Polyurethane
Finishcoat Polyurethane Spatter Structure
Kit Size (L) Application Colour Product Type
5 LitreKit VariousAliphatic IsocyanateCured Polyurethane
A three component solvented aliphatic isocyanate cured polyurethanesystem suitable for use on a wide range of substrates such as steel,fibreglass and other substrates where a good quality structure finish isrequired. The spatter structure enhances the appearance of the finisheditem and hides any abnormalities in the surface being coated.
Good resistance to UV and atmospheric exposureGood colour and gloss retention, with low chalking andyellowing propertiesTough and abrasion resistant
Finishcoat Polyurethane WBA two component solventless acrylic polyurethane coating, Provideshighly durable direct gloss finish colour coat incorporating andextensive range of performance characteristics.
Zero V.O.C.
Economically friendlyExhibits excellent flexibility and durability and is resistant to chalkingExcellent adhesion over epoxy primers, good corrosion andchemical resistanceOutstanding operational performance including abrasion,chemical and impact resistance and colour/gloss retention
Kit Size (L) Application Colour Product Type
1 and5 Litre
RAL, NCSand SABS
Solventless AcrylicPolyurethane
Pipetank 165 HotcoatA two component solvent free polyurethane coating consisting of a
base polyol component & a highly reactive isocyanate activator, whenreacted together form a hard, tough, highly adherent coating used inextreme immersion & buried conditions.
SANS 1217 Type 1CUsed as a very abrasion resistant coating for backfill, slurry or rawwater containing abrasive particlesResistant to Cathodic Disbondment & buried conditionsSuitable for water, sewage, raw water, chemically polluted water &mining conditions
Resistant to permeability, corrosion, chemicals & abrasion
Kit Size (L) Application Colour Product Type
60 & 600LitreKits
RAL 7004Signal Grey
Solvent freePolyurethane
8/12/2019 Speccoats_AntiCorrosiveBrochure
26/36
Sponge Scotchbrite
Pad Brushes Rollers
ConventionalSpray
AirlessSpray Pour Trowel
Squeegee Spray
26
Protective & Anti-Corrosive Coatings
Geothane 5020
Kit Size (L) Application Colour Product Type
400 Litre Tan Polyurethane
A 100% solids fast set elastomeric polyurethane with excellentcombined dilute chemical and oil resistance.
Excellent diesel resistanceCan be applied to concrete or to geotextile to provide a seam freeliners for firewater and similar contaminated water containmentFast set time controlled to allow bonding of sections of geotextile
to ensure leak free joints1:1 mixing ratio
Polyurethanes
8/12/2019 Speccoats_AntiCorrosiveBrochure
27/36
Sponge Scotchbrite
Pad Brushes Rollers
ConventionalSpray
AirlessSpray Pour Trowel
Squeegee Spray
27
Protective & Anti-Corrosive Coatings
Vinyl HB IntercoatA single pack, solvented, vinyl copolymer pigmented intermediate coatsuitable for steel structures, shipbuilding, mechanical and automotiveengineering transportation and the protection of buildings in chemicalplants, coastal and marine environments.
Exhibits good flexibility and durabilityResistant to a wide range of chemicalsOutstanding adhesion
Kit Size (L) Application Colour Product Type
5 and 20Litre
Light AdmiraltyGrey
Vinyl Copolymer
Vinyl Enamel FinishcoatA single pack, solvented, vinyl copolymer pigmented enamel finishcoat
suitable for steel structures, shipbuilding, mechanical and automotiveengineering transportation and the protection of buildings in chemicalplants, coastal and marine environments.
Exhibits good flexibility and durabilityResistant to a wide range of chemicalsOutstanding adhesion
Kit Size (L) Application Colour Product Type
5 and 20Litre
SABS, RAL and NCS Vinyl Copolymer
Vinyl HB Primer
Kit Size (L) Application Colour Product Type
5 and 20 Litre Red OxideVinyl
Copolymer
A single pack, solvented, vinyl copolymer pigmented primer suitablefor steel structures, shipbuilding, mechanical and automotiveengineering transportation and the protection of buildings in chemicalplants, coastal and marine environments.
Exhibits good flexibility and durabilityResistant to a wide range of chemicals
Outstanding adhesion
Etch PrimerA one component solvented high quality etch primer designed toprovide excellent adhesion to steel and other metal surfaces and willprotect the surface from corrosion until the full paint system is applied.
Fast DryingSuitable as an after blast primerWeld-able when applied in thin coats, weld spatter does not adhereto the surface
Excellent corrosion protection. A 25m film will provide up to three
months protection on an inland environment
Outstanding adhesion & flexibilityAvailable as ready for use (spraying viscosity)
Kit Size (L) Application Colour Product Type
5, 20 and200 Litre
Red Oxide, Grey,Black & Olive Green
Phenolic /Polyvinyl-butyral
Etch Primer LSA one component solvented lower build etch primer designed toprovide excellent adhesion to steel and other metal surfaces and willprotect the surface from corrosion until the full paint system is applied.
Fast Drying
Suitable as an after blast primerWeld-able when applied in thin coats, weld spatterdoes not adhere to the surface
Kit Size (L) Application Colour Product Type
5, 20 and200 Litre
Red Oxide, Grey,Black & Olive Green
Phenolic /Polyvinyl-butyral
Vinyls
8/12/2019 Speccoats_AntiCorrosiveBrochure
28/36
Sponge Scotchbrite
Pad Brushes Rollers
ConventionalSpray
AirlessSpray Pour Trowel
Squeegee Spray
28
E-Zinc 6580 PrimerTwo component solvented zinc rich organic based polyamide-epoxyprimer for the protection of structural steel in salt and weatheringenvironments for use under a wide range of high performance topcoatsystems in corrosive environments.
Used in pulp, paper, chemical and petrochemical industries60% Zinc in Dry Film
E-Zinc Primer
Kit Size (L) Application Colour Product Type
1.5 and 20 LitreKits
GreyZinc Rich
Epoxy
Two component solvented zinc rich organic based epoxy primerproviding excellent protection to abrasive blast cleaned steelsubstrates, for use under a wide range of high performance topcoatsystems in corrosive environments.
Provides outstanding corrosion resistance at least equalto hot dip galvanizing90% zinc in dry film
Kit Size (L) Application Colour Product Type
1.5 and 20 LitreKits
GreyZinc Rich
Epoxy
I-Zinc PrimerA two component solvented coating, based on an ethyl silicate binder
incorporates a zinc component which cures to a inorganic, hardcorrosion resistant layer which protects the steel in a similar way togalvanizing.
An inorganic zinc rich primer provides excellent protection tosteel substratesFor use under a wide range of high performance topcoat systems incorrosive environments
Kit Size (L) Application Colour Product Type
10 Litre Metallic Pink Ethyl silicate /
zinc
Zinc CoatingsProtective & Anti-Corrosive Coatings
8/12/2019 Speccoats_AntiCorrosiveBrochure
29/36
Sponge Scotchbrite
Pad Brushes Rollers
ConventionalSpray
AirlessSpray Pour Trowel
Squeegee Spray
29
ZincfixA two component solventless, zinc rich organic coating containing>80% metal is applied to clean steel and hot dip galvanized surfacesto form an adherent anti-corrosive coating in excess of 100m thick.Zincfix combines the convenience of squish pack technology with the
chemistry of modern solvent free epoxies.
Zincfix is approved by the Hot Dip Galvanizers Associationof South Africa
ZincDek Primer
Kit Size (L) Application Colour Product Type
1.5 and 5 LitreTins
Grey Zinc Primer
One component solvented air drying metallic zinc pigmented primer,organic based, providing anti-corrosion protection to steel substrates,for use under a wide range of high performance topcoat systems incorrosive environments.
Provides galvanic protection and prevents under film corrosionGreater than 90% Zinc in the dry film
Kit Size (gm) Application Colour Product Type
100 gmSquish Pack
GreyZinc RichCoating
ZincDek Cold Zinc Galvanising SprayAn cold zinc galvanising aerosol for use after galvanizing as a touch
up paint for damaged galvanized surfaces or as a primer or final coaton iron or steel. Forms a flexible, non cracking, non-chipping coat thatprotects the surfaces even in acidic atmospheres.
Contains
8/12/2019 Speccoats_AntiCorrosiveBrochure
30/36
Testing Equipment
107 Cross Hatch CutterProvides instant assessment of quality of the bond to the substrateDue to its rugged construction this gauge is ideal for thin, thick ortough coatings on all surfacesAvailable as a basic or full kit
108 Hydraulic Adhesion TestersAn extremely versatile gauge which can be used for manyadhesion requirementsTests can be made on flat or curved surfaces
270 Pinhole DetectorsThis unit utilises the wet sponge technique and has been designed
to set a new standard for wet sponge detectorsA high quality, low voltage detector with similar accessories to ahigh voltage sprak testerVisual & audible alarmsAutomatic sensitivity calibration & voltage checks
112 Hexagonal Wet Film CombsHexagonal precision formedstainless steel wet film combsLong lasting & reusableSupplied in a range of thicknesses
measuring up to 3000um(120mils)
224 Digital Surface Profile Gauge224 provides the latest in surfaceprofile measuring technologyAccurate, fast & very user friendly,this gauge is available with orwithout memoryTop model available which includesBluetooth wireless technology& can store up to 50,000 readings
in 999 batches
456 Coating Thickness GaugeAvailable with built in probe or a
separate probe (different sized& radius probes available)Memory versions are capable ofstoring up to 40,000 readings inup to 999 batchesAvailable as ferrous (F), non-ferrous(N) or both Ferrous / non-Ferrous (FNF)Standard & Top Models now comewith Bluetooth technology forinstant transmission with your PCwith no cablesCalibration Foils Available
30
8/12/2019 Speccoats_AntiCorrosiveBrochure
31/36
Testing Equipment
213 Digital ThermometersThe latest in microprocessor technology, superior durability & isdesigned for reliability & ease of useRubber bumper seals for impact resistanceExtruded aluminium case for superior durability
C / F switchableSurface, liquid, magnetic & needle probes sold separatelyMeasure from -50C to 850C
266 DC Holiday DetectorsRevolutionises high voltage DC testing of coatings porositydetection making it safer, easier & more reliable than ever beforeAdjustable voltage & standard specification selectionUp to 30kV DC versions availableAudible & visual alarms are activated when a flaw is detectedDual safety switch on handle to avoid accidental switch on
319 Dewpoint MeterAn extremely versatile digital Dewpoint Meter for measuring &
recording the climate parameters required to ensure good qualitycoating applicationsMeasure & record climatic parameters including relativehumidity, air temperature, surface temperature, dewpoint &the difference between the surface temperature & the dewpointHi / Low audible & visual alarms when limits are exceededIntergated flash light to illuminate the surface being measured
31
8/12/2019 Speccoats_AntiCorrosiveBrochure
32/36
Allows assessment of the quantity & size of dust particles onsurfaces prepared for coatingDust on blast cleaned surfaces can reduce adhesion leading topremature coating failure & sub-standard coating finishThe kit can be used in accordance with the recommendations of BSEN ISO 8502-3 either as a pass/fail test or as a permanent record ofthe presence of dustSupplied in a carry case for use in the field to assess thesurface cleanliness
Testing Equipment
142 ISO 8502-3 Dust Tape Test kit
Speccoats Weber Reilly Soluble Salts Test Kit Chlor*Test
Accurate measurement with high resolution0.2% AccuracyChecks the force required to remove a coating from a substrate
Alluris Force Gauge
Soluble iron salts - Ferrous Chloride and Ferrous Sulphate are found
in the bottom of corrosion pits of badly corroded steelThese salts are soluble in water & can cause osmotic blisteringof coatings applied to steelSoluble salts must therefore be removed prior to coating a surfaceThis test kit identifies the presence of soluble salts on abrasiveblast cleaned steel
READING THE COLOUR CARD When the indicator is sprayed on freshly abraded steel
(minimum to Sa 2 of ISO 8501-1 standard) it will reactwith the soluble iron salts by turning pink
The higher the concentration of soluble salts,the darker the colour
This colour card as provided as a guideline to theconcentration present
A test used for testing for chlorides
A very reliable & easy test
32
8/12/2019 Speccoats_AntiCorrosiveBrochure
33/36
Application Equipment
Increasing a materials temperature lowers its viscosity, an effect thatcan normally only be achieved by thinning the material with solvent.Material is fed at a constant temperature insuring consistency.
Two Component Hot Airlessspray equipmentFor automatic mixing, heating& applying of two componentsolvented & solventlessmaterials from low to highviscosities
PLC controlled with paintagitation & automatic flushing& feed controls
For the automatic mixing,
dosing, colour change & flushingof two component materials.
VRC MixA solution for 2 componentmaterial applications
Portable VRC mix is an economic,compact & easy to use unit for allmaterials including high viscositymaterials & high deliveryDesigned to improve yourdaily workEnsure correct mixing & makesapplication much easierQuick colour change
MixingPressure Pots
Piston pumps draw the material out of the container & apply thenecessary pressure to push it through hoses or pipes to the spray gun.
Pumps are pneumatically operatedPiston pumps are classified by pump ratio & volumetric flowSuitable for low to high viscosity materials
In diaphragm pumps, the material is drawn out of the container via adouble diaphragm and fed through hoses or pipes with the necessarypressure.
Double membrane pumps characterised by
material feed with very low pulsation
Diaphragm Pumps are categorisedinto 4 groups
Simple diaphragm pumpsDouble diaphragm pumpsRatio double diaphragm pumpsHigh pressure double diaphragm pumps
These accomplish several tasks at once.
Feed material by means of compressedair that puts the contents inside the potunder pressureThe supply of material from the pot isabsolutely free of pulsationPressure pot acts as a materialstorage facilityAvailable with automatic agitation
Airless Piston Pumps
Diaphragm Pumps Hot Spraying
33
8/12/2019 Speccoats_AntiCorrosiveBrochure
34/36
Application Equipment
34
Airless Manual & Automatic Spray Guns(up to 530 bar)
This process is an airless atomizing paint spray method; a pistonpump feeds the spray medium from intake to the nozzle increasingthe driving air ration pressure by a factor of the pump ratio.This puts the medium under pressure causing atomization and theability to apply material without the use of air.
Application
AccessoriesReversible Spray Nozzles
Flat Tip NozzlesNozzle Seals & HoldersPaint & Air Hoses
Pipe Coating SystemsFor the easy application of higher solids 2 Component materials,solvented or solventless with many varying mixing ratio capabilities.
Speccoats offers internal/external pipe coating systems
Internal coating equipment for non rotating pipes from100mm to 2.5m IDAirless internal/External spray painting of rotating pipesExternal airless spray painting with fixed spray ring for pipesmoving on conveyorExternal airless spray painting with oscillating automaticspraying ring for pipes laid on or under the ground
Brushes & Rollers
Air Atomization Manual GunsAvailable as Cup Guns or PressureFeed GunsThese guns can be used to spraypractically all coating materials
Available with a variety of nozzle sizes
Available as medium pressure or HVLPversions to guarantee the correcttransfer efficiency
8/12/2019 Speccoats_AntiCorrosiveBrochure
35/36
Application Equipment
35
HSS Air GunFor the easy application of higher solids 2 Component materials,solvented or solventless with many varying mixing ratio capabilities.
Based on a reliable design with proven dependability & serviceEquipped with unique feature for separate material flow & airatomizing spray controlMaterial is mixed through a static mixer
Flow restrictors are available for materials of a low viscosityNon drip, right angle & standard spray nozzles available forgetting into hard-to-reach places
Cartridge Application
HSS Quad 3000For the easy application of higher solids 2 Component materials,solvented or solventless with many varying mixing ratio capabilities.
Up to 3000ml of capacity, the HSS Quad 3000 is perfect for larger
volume, plural component spray, foam & meter mix dispenseapplicationsProvides increased field productivity, enhanced flexibility, dispensecontrol & cuts down operator fatigueUser friendly features include a large wheelbase, accurate air &material flow, dump & bleed valves & easy cartr idge changeout proceduresAll colour coded for easy use
8/12/2019 Speccoats_AntiCorrosiveBrochure
36/36
Paint Manufacturers
Address: 9 Covora Street
Jet Park
Boksburg
Gauteng
South Africa
International Tel: 00 27 11 397 2140
Within South Africa Tel: 0861 37 2468
International Fax: 00 27 11 397 3420
Within South Africa Fax: 011 397 3420
Email: [email protected]
Web: www.speccoats.co.za
Paint and Coatings.
Our Brands include:Application Equipment