Upload
others
View
7
Download
0
Embed Size (px)
Citation preview
91www.fi pa.com
Special vacuum cups | Contents
Special vacuum cups at a glance ................................................................. 93
Special vacuum cups SX .................................................................................... 94
93www.fi pa.com
Special vacuum cups | At a glance
FIPA special vacuum cups SX
Temperature-resistant felt coated vacuum cups – Series SX-F> Nearly mark-free special vacuum cup for the highest temperature requirements, such as in the
glass industry> Temperature resistant up to 1022 °F (SI)> Special felt pad permanently attached to elastomer carrier by vulcanization> For more information, see page 94
Vacuum cups with sponge pad – Series SX-SH> Flat vacuum cup with contact surface of special silicone sponge> Very low-marking on polished surfaces> Flat sealing prevents leakage on rough, porous surfaces
> For more information, see page 96
Bernoulli vacuum cups – Series SX-B > Low-contact and torsion-resistant transport of sensitive products> No ejector, requires compressed air only> High holding force: Bernoulli vacuum cups can move up to 21.16 oz of mass> Perfectly suited for porous products thanks to high volume fl ow at low vacuum level
> For more information, see page 98
Hand grippers – SX-G> Sturdy gripper for the manual handling of fl at, smooth products> No vacuum source required> Simplicity of handling – release of the product via a release button
> For more information, see page 100
Sealing profi les> Available by the meter for manufacturing individual vacuum suction plates> Ideal adaptation to specifi c product requirements
> More information from page 101
94 Phone 1 (800) 913 7002
Special vacuum cups | Special vacuum cups SXTemperature-resistant, felt-coated vacuum cups – Series SX-F
* When ordering please add the appropriate material code to the item no. You will find it in the foldout.
Temperature-resistant, felt-coated vacuum cups – Series SX-F
Product Description Advantage
Almost mark-free special vacuum cup for high temperature requirements, e.g. in the glass industry. Special felt pad vulcanized to elastomer carrier. Migration of silicone particles is prevented by vapour-deposited aluminum layer. Connection up to Ø 70 mm by means of plug nipple, from Ø 90 mm with bolted bracket plate.
> Temperature resistant up to 932 °F > Almost mark-free > Cost-effective replacement of worn seals
Note
There is a small leak at first use resulting from the texture of the special felt, but after a brief period of use this will be significantly reduced by the thickening of the felt layer.
Technical Data
Item no.
Model / Lip dimensions
Weight [oz] Max. operating temperature [°F]
Material / color Number of bellows
26.025.009._* SX-F-25 2 0.21 932 SI (tr/ge) --
26.037.010._* SX-F-40 3 0.35 932 SI (tr/ge) --
26.070.011._* SX-F-70 7 0.85 932 SI (tr/ge) --
26.090.001._* SX-F-90 17 2.82 932 (SI), 662 (FKM) SI (tr/ge), FKM (sw/ge) 1.5
26.120.002._* SX-F-120 18 4.94 662 FKM (sw/ge) 1.5
26.160.003._* SX-F-160 18 7.23 662 FKM (sw/ge) 1.5
Accessories
Item no.
Suitable fittings
G1/8-male G1/8-female G1/4-male G1/4-female G3/8-female
26.025.009._* 270.132 (p. 455) 270.114 (p. 460) 270.208 (p. 464) 270.178 (p. 470) --
26.037.010._* 270.132 (p. 455) 270.114 (p. 460) 270.208 (p. 464) 270.178 (p. 470) --
26.070.011._* 270.132 (p. 455) 270.114 (p. 460) 270.208 (p. 464) 270.178 (p. 470) --
26.090.001._* -- -- -- -- 270.400 (p. 475)
26.120.002._* -- -- -- -- 270.402 (p. 475)
26.160.003._* -- -- -- -- 270.404 (p. 475)
MINIMUM MARKING
95www.fi pa.com
Special vacuum cups | Special vacuum cups SXTemperature-resistant, felt-coated vacuum cups – Series SX-F
* When ordering please add the appropriate material code to the item no. You will find it in the foldout.
Dimensions
d2
d1
d5H
h3
D
a
b
d1
H
h3
D
d5
a
Ø 24 | 37 | 67 mm Ø 89 | 120 | 150 mm
a = Felt pads b = For silicone vacuum cups with silicone membranes: evaporated aluminum layer
Item no.
Ø D [mm] Ø d1 [mm] Ø d2 [mm] Ø d5 [mm] H [mm] h3 [mm]
26.025.009._* 24 16 8 29 36 3.3
26.037.010._* 37 18 8 42 38 6.5
26.070.011._* 67 21 8 71 36 8
26.090.001._* 89 87 -- 99 38 10.5
26.120.002._* 120 108 -- 129 45 17.5
26.160.003._* 150 130 -- 161 48 16.5
96 Phone 1 (800) 913 7002
* When ordering please add the appropriate material code to the item no. You will find it in the foldout.
Special vacuum cups | Special vacuum cups SXVacuum cups with sponge pad – Series SX-SH
Vacuum cups with sponge pad – Series SX-SH
Product Description Advantage
Low-marking flat vacuum cup with contact surface of special silicone sponge. Soft sponge coating compensates for unevenness. Connection via an interlocking snap-in plug nipple.
> Very low-marking on polished surfaces > Flat sealing prevents leakage > Cost-effective replacement of worn seals
Technical Data
Item no.
Model / Lip dimensions
Max. operating temperature [°F] Material / color
104.008.082._* SX-SH-8 0.5 392 SI (bl/r)
104.009.083._* SX-SH-9 0.5 392 SI (bl/r)
104.013.084._* SX-SH-13 0.5 392 SI (bl/r)
104.015.085._* SX-SH-15 1 392 SI (bl/r)
104.020.086._* SX-SH-20 1.5 392 SI (bl/r)
104.030.087._* SX-SH-30 1.5 392 SI (bl/r)
104.040.088._* SX-SH-40 2.5 392 SI (bl/r)
Accessories
Item no.
Suitable fittings Suitable spring plunger
M5-maleG1/8-male
G1/8-female
G1/4-male
G1/4-female Sp
rin
g p
lun
ger
Spri
ng
plu
ng
er
Spri
ng
plu
ng
er
Spri
ng
plu
ng
er
104.008.082._*270.200 (p. 449)
270.064 (p. 457)
270.065 (p. 461)
-- -- -- --50.018 (p. 494)
8.550.141 (p. 496)
10 -- --
104.009.083._*270.200 (p. 449)
270.064 (p. 457)
270.065 (p. 461)
-- -- -- --50.018 (p. 494)
8.550.141 (p. 496)
10 -- --
104.013.084._*270.200 (p. 449)
270.064 (p. 457)
270.065 (p. 461)
-- -- -- --50.018 (p. 494)
8.550.141 (p. 496)
10 -- --
104.015.085._* --270.012 (p. 459)
270.020 (p. 461)
270.034 (p. 466)
270.038 (p. 471)
50.005 (p. 496)
550.148 (p. 496)
--50.145 (p. 496)
1050.146 (p. 496)
30
104.020.086._* --270.012 (p. 459)
270.020 (p. 461)
270.034 (p. 466)
270.038 (p. 471)
50.005 (p. 496),
550.148 (p. 496)
--50.145 (p. 496)
1050.146 (p. 496)
30
104.030.087._* --270.012 (p. 459)
270.020 (p. 461)
270.034 (p. 466)
270.038 (p. 471)
50.005 (p. 496)
550.148 (p. 496)
--50.145 (p. 496)
1050.146 (p. 496)
30
104.040.088._* --270.012 (p. 459)
270.020 (p. 461)
270.034 (p. 466)
270.038 (p. 471)
50.005 (p. 496)
550.148 (p. 496)
--50.145 (p. 496)
1050.146 (p. 496)
30
97www.fi pa.com
Special vacuum cups | Special vacuum cups SXVacuum cups with sponge pad – Series SX-SH
* When ordering please add the appropriate material code to the item no. You will find it in the foldout.
Dimensions
d2
d3
d1
d4
DH
h1h2
a
d2
d3
d1
D
H
h1h2
d4
a
Ø 8 | 9 | 13 | 15 | 20 mm Ø 30 | 40 mm
a = Sponge layer of special silicone (minimum marking)
Item no.
Ø D [mm] Ø d1 [mm] Ø d2 [mm] Ø d3 [mm] Ø d4 [mm] H [mm] h1 [mm] h2 [mm]
104.008.082._* 8 10.5 5 7 3 14 3 5
104.009.083._* 9 10.5 5 7 3 14 3 5
104.013.084._* 13 10.5 5 7 3 14 3 5
104.015.085._* 15 15.5 7.5 11.5 4 17.5 6 8
104.020.086._* 20 15.5 7.5 11.5 4 17.5 6 8
104.030.087._* 30 15.5 7.5 11.5 4 17.5 6 8
104.040.088._* 40 15.5 7.5 11.5 4 17.5 6 8
98 Phone 1 (800) 913 7002
Special vacuum cups | Special vacuum cups SXBernoulli vacuum cups – Series SX-B
Bernoulli vacuum cups – Series SX-BNon-contact vacuum suction grippers
> Integrated vacuum generation on the Bernoulli principle > No ejector, requires compressed air only > Non-contact, deformation-resistant transport of thin and sensitive products > High holding force: Bernoulli vacuum cups can grip up to to 21.16 oz of mass > Perfectly suited for porous products thanks to high volume flow at low vacuum level
> Easy to install, system flexibly expandable through lateral compressed air inlets > Long life cycle due to maintenance-free operation
Technical Data
Item no.
Model Operating pressure [psi]
Holding force at 72.5 psi [N]
Air consumption at 72.5 psi [scfm]
Ambient air temperature [°F]
Medium Oil content of compressed air [mg/m³]
Suitable accessories
65.510 SX-B-20 14.5 - 101.5 0.9 3.5 41 - 140 Compressed air 0Pads NBR 78.509 Pads SI 78.510
65.520 SX-B-30 14.5 - 101.5 1.3 3.5 41 - 140 Compressed air 0Pads NBR 78.509 Pads SI 78.510
65.530 SX-B-40 14.5 - 101.5 2 3.9 41 - 140 Compressed air 0Pads NBR 78.511 Pads SI 78.512
65.540 SX-B-60 14.5 - 101.5 6 7.4 41 - 140 Compressed air 0Pads NBR 78.511 Pads SI 78.512
Diagrams
> Holding force as a function of operating pressure > Air consumption depending on operating pressure
Rete
ntio
n fo
rce
[N]
0 14.5 290
Operating pressure [psi]43.5 58 72,5 87
8
9
6
7
4
5
2
3
1
10
101.5
65.540
65.530
65.520 65.510
Air
con
sum
ptio
n [
l/m
in]
0 14.5 290
Operating pressure [psi]43.5 58 72.5 87
250
200
100
150
50
300
101.5
65.540
65.510 | 65.520
65.530
99www.fi pa.com
Special vacuum cups | Special vacuum cups SXBernoulli vacuum cups – Series SX-B
Dimensions
B C
26
14 (1)
M5 (12,1) 3xM3
M5
Ø10
15
120°
120°Ø
7
Ø20
A D
65.510
17
6,5 (1)
Ø 7
Ø 3
0
2xM5
22
45º 45º
4xM4 M5
A
B C D
65.520
3-Ø6
33,4
120º
120º
17
6,5 (1)
Ø 4
0
2xM5 4xM4
45º 45º
32
M5
A
B C D
65.530
3-Ø6
45º
120º
120º
53,4
17
7 (1)
2xM5
45º 45º
45
M54xM4
A
B C D
Ø 60
65.540
A = Silicone rubber pads (with 65.530 and 65.540 the pads can be removed in case of contact-less application)
B = Pneumatic connection C = Depth 5 mm D = Pneumatic connection
100 Phone 1 (800) 913 7002
Special vacuum cups | Special vacuum cups SXHand grippers – SX-G
Hand grippers – SX-G
Product Description
Sturdy gripper for the manual handling of flat, smooth products. No vacuum source required. Simple handling. Release of the product via a release button.
Technical Data
Item no.
Model / Lip dimensions Tearing force [lbs] Material / color
64.001._* SX-G-55 30.9 Vinyl (sw)
64.002._* SX-G-65 41.9 Vinyl (sw)
64.003._* SX-G-75 48.5 Vinyl (sw)
64.004._* SX-G-125 55.1 NBR (sw)
64.005._* SX-G-130 61.7 Vinyl (sw)
Dimensions
D
H
D
HØ 55 | 63 mm Ø 78 | 128 | 131 mm
Item no.
Ø D [mm] H [mm]
64.001._* 55 43
64.002._* 63 45
64.003._* 78 42
64.004._* 128 51
64.005._* 131 66
101www.fi pa.com
Special vacuum cups | Special vacuum cups SX
Sealing cord, round – Series SX-DLong-length version for production of individual vacuum suction plates
E Ø D
Technical Data Dimensions
Item no. Mod
el /
Li
p d
imen
sion
s
Rec
omm
end
ed
inst
alla
tion
dep
th
E [m
m]
Mat
eria
l / c
olor
Ø D
[m
m]
231.05.026.12 SX-D-5 3.7 CR (sw) 5
231.06.011.12 SX-D-6 4.5 CR (sw) 6
231.08.012.12 SX-D-8 6 CR (sw) 8
231.10.013.12 SX-D-10 7 CR (sw) 10
231.12.014.12 SX-D-12 8.5 CR (sw) 12
Ordering notes
Minimum standard length: 1000 mm
Sealing cord, rectangular – Series SX-DLong-length version for production of individual vacuum suction plates
H
B
Technical Data Dimensions
Item no. Mod
el /
Lip
d
imen
sion
s
Mat
eria
l / c
olor
B [
mm
]
H [
mm
]
231.10x6.006.12 SX-D-10x6 CR (gr) 6 10
231.20x10.027.12 SX-D-20x10 EPDM (sw) 10 20
Ordering notes
Minimum standard length: 1000 mm
Sealing cord, profiled – Series SX-DLong-length version for production of individual vacuum suction plates
10
17
7
Technical Data
Item no. Mat
eria
l / c
olor
231.17x10.025.12 NR (gr)
Ordering notes
Minimum standard length: 1000 mm
102 Phone 1 (800) 913 7002
Special vacuum cups | Special vacuum cups SX
Sealing cord, profiled – Series SX-DLong-length version for production of individual vacuum suction plates
10
17
7
Technical Data
Item no. Mat
eria
l / c
olor
231.14x8x2.009.12 Sponge rubber (gr)
Ordering notes
Minimum standard length: 1000 mm
Sealing cord, profiled – Series SX-DLong-length version for production of individual vacuum suction plates
4
3
4
5,53,
5
1,2
Technical Data
Item no. Mat
eria
l / c
olor
231.5,5x4.015.2tr SI (tr)
Ordering notes
1 packaging unit = 25 m
Sealing cord, profiled – Series SX-DLong-length version for production of individual vacuum suction plates
7,5
10,5
6
1,5
1,1,5
Technical Data
Item no. Mat
eria
l / c
olor
231.10,5x7,5.001.12 EPDM (sw) - 80/30° Shore
Ordering notes
Minimum standard length: 1000 mm
103www.fi pa.com
Special vacuum cups | Special vacuum cups SX
Sealing cord, profiled – Series SX-DLong-length version for production of individual vacuum suction plates
10,5
1,5
1,5
7,5
6
Technical Data
Item no. Mat
eria
l / c
olor
231.10,5x7,5.002.12 EPDM (sw) - 80/30° Shore
Ordering notes
Minimum standard length: 1000 mm
Sealing cord, profiled – Series SX-DLong-length version for production of individual vacuum suction plates
1512
3
3
26,5
Technical Data
Item no. Mat
eria
l / c
olor
231.26,5x15.003.12 EPDM (sw) - 80/30° Shore
Ordering notes
Minimum standard length: 1000 mm
105www.fi pa.com
Vacuum gripping systems | Contents
Vacuum gripping systems at a glance ...................................................... 106
Customized vacuum grippers ........................................................................ 107
Standard vacuum grippers .............................................................................. 108
106 Phone 1 (800) 913 7002
Vacuum gripping systems | Vacuum gripping systems at a glance
Advantages / Benefits
Vacuum grippers:> Finely graded series for the handling of dense or porous products> Integrated vacuum generation > Energy saving function as intelligent valve technology closes unused suction openings> Contamination-proof design ensures high availability and process safety> Suitable for fast cycle times> Simple installation and operation> Wide range of standard products as well as rapid implementation of customized solutions
Foam rubber mats:> Long service life of the foam mats thanks to very high resistance to wear and high aging stability> Wide range of foams for quick adaptation to different products> Fast and non-destructive exchange of vacuum mats ensures high productivity with minimum down times
Application
> Automated handling processes: Palettizing, depalletizing, separation and sorting> Safe operation Independent of material properties such as surface, porosity, size and weight> Undefi ned take-up positions> High gripping fl exibility: one piece or entire product layer> Under harsh conditions (dust, humidity, ...)
Industry examples:> Packaging technology, timber, chemicals and building materials
Construction
> Integrated vacuum generation with ejectors, thereby ideally adaptable to the prevailing operating parameters> External vacuum generation if required (side channel blowers for porous products: high volume fl ow)> Aluminum plate for the take-up of the ejectors and vacuum meter> Integrated bore-holes or patented valve system> Vacuum mats, ideally matched with the workpiece to be handled> Bore-hole diameter and distance between each hole can be adapted to the application TL version: without valve technology (with flow resistors) TC version: with valve technology
107www.fi pa.com
Vacuum gripping systems | Customized vacuum grippers
Advantages / Benefits
Customized vacuum grippers:> Freely confi gurable, highly effi cient ejector modules for fl exible and economic adaptation to the vacuum requirements of the
goods to be handled> Wide range of side channel blowers as an energy-saving alternative, especially when handling materials with high porosity and
correspondingly high air demand> Implementation of customized gripper sizes and functional extensions, such as release and/or vacuum control> Flexible adjustment of the valve system for maximum process safety and reliability as well as long service life > Design and delivery of individual gripper modules up to complete gripper systems for attachment to robots or to portal or crane
systems
Customized vacuum mats:> Vacuum mats precisely adjustable to application thanks to variety of materials > Highly wear- and aging-resistant> Quick, non-destructive and residue-free replacement, when needed, of vacuum mats without tools or pre-handling> Cost-effective initial investment as well as reduced operating costs> Vacuum mats are perfectly matched to the FIPA range of vacuum grippers> Fast and economic realization of individual sizes, qualities and hole patterns, also as an alternative fi t for major gripper
systems on the market
108 Phone 1 (800) 913 7002
Vacuum gripping systems | Vacuum grippersVacuum grippers 70x70
Vacuum grippers 70x70
Product Description
> Use in virtually all automated handling processes: Palletising, de-palletising, separating, sorting > Integrated vacuum generation > TL Design: with flow resistors > Contamination-proof design ensures high availability and process safety > Suitable for fast cycle times > Simple installation and operation > Fast and easy replacement of the foam mats
Technical Data
Item no. Air
con
sum
ptio
n at
87
psi
[sc
fm]
Suct
ion
pow
er
agai
nst
at
mos
ph
ere
[scf
m]
Fin
al v
acu
um
[%]
Wei
ght
[lb
s]
TL70x70-3010 0.9 1.6 60 0.7
TL70x70-5010 3.7 6.9 60 1.8
Diagrams
> Holding force at 87 psi depends on the vacuum when working with different permeable materials (values at 100% coverage of the vacuum gripper / minimum 80% coverage recommended)
Gri
ppin
g fo
rce
at 8
7 ps
i [N
]
Vacuum [%]0
040 60
60
50
40
30
20
10
20
semi-permeable,e.g. wood
porous, e.g. carton
semi-perme
non-permable, e.g. steel
ood
109www.fi pa.com
Vacuum gripping systems | Vacuum grippersVacuum grippers 70x70
Dimensions
1414
77,2
7070
42,
2
87,520
20
Ø 10
a
b
c
d
a = Fixing with M4 screws b = 6 mm quick-fitting c = 20 mm foam rubber mat d = 9 boreholes
110 Phone 1 (800) 913 7002
Vacuum gripping systems | Vacuum grippersVacuum grippers 120x120
Vacuum grippers 120x120
Product Description
> Use in virtually all automated handling processes: Palletising, de-palletising, separating, sorting > Integrated vacuum generation > TL Design: with flow resistors > Contamination-proof design ensures high availability and process safety > Suitable for fast cycle times > Simple installation and operation > Fast and easy replacement of the foam mats
Technical Data
Item no. Air
con
sum
ptio
n at
87
psi
[sc
fm]
Suct
ion
pow
er
agai
nst
at
mos
ph
ere
[scf
m]
Fin
al v
acu
um
[%]
Wei
ght
[lb
s]
Suit
able
foa
m m
at
TL120x120-P20 8.4 14.2 60 3.1 PPF120.120-P20
Diagrams
> Holding force at 87 psi depends on the vacuum when working with different permeable materials (values at 100% coverage of the vacuum gripper / minimum 80% coverage recommended)
Gri
ppin
g fo
rce
at 8
7 ps
i [N
]
Vacuum [%]0
040 60
250
200
150
100
50
20
porous, e.g. cartonsemi-permeable,e.g. wood
non-permable, e.g. steel
111www.fi pa.com
Vacuum gripping systems | Vacuum grippersVacuum grippers 120x120
Dimensions
120
110
48
120
48
20
20
Ø 10
171
b
a
c
d
a = Fixing with M6 screws b = 10 mm quick-fitting c = 20 mm foam rubber mat d = 25 boreholes
112 Phone 1 (800) 913 7002
Vacuum gripping systems | Vacuum grippersVacuum grippers 120x230
Vacuum grippers 120x230
Product Description
> Use in virtually all automated handling processes: Palletising, de-palletising, separating, sorting > Integrated vacuum generation > TL Design: with flow resistor > TC Design: with valve technology allows unoccupied suction openings to be sealed, thereby saving energy > Contamination-proof design ensures high availability and process safety > Suitable for fast cycle times > Simple installation and operation > Fast and easy replacement of the foam mats
Technical Data
Item no. Air
con
sum
ptio
n at
87
psi
[sc
fm]
Suct
ion
pow
er
agai
nst
at
mos
ph
ere
[scf
m]
Fin
al v
acu
um
[%]
Wei
ght
[lb
s]
Suit
able
foa
m m
at
TL120x230-P20 3.7 6.9 60 3.4 PPF120.230-P20
TL120x230-P40 3.7 6.9 60 3.4 PPF120.230-P40
TC120x230-P20 3.7 12.6 60 5.1 PPF120.230-P20
TC120x230-P40 3.7 6.9 60 5.1 PPF120.230-P40
Diagrams
> Holding force at 87 psi depending on the vacuum when working with different permeable materials (values at 100% coverage of the vacuum gripper / 80% coverage – for TL design – is recommended)
Gri
ppin
g fo
rce
at 8
7 ps
i [N
]
Vacuum [%]0
040 60
450
300
350
400
250
200
100
50
150
20
non-permable, e.g. steel
semi-permeable,e.g. wood
porous, e.g. carton
Gri
ppin
g fo
rce
at 8
7 ps
i [N
]
Vacuum [%]0
040 60
450
300
350
400
250
200
100
50
150
20
non-permable, e.g. steel
semi-permeable,e.g. wood
porous, e.g. carton
TL120x230-P20 | TL120x230-P40 TC120x230-P20 | TC120x230-P40
113www.fi pa.com
Vacuum gripping systems | Vacuum grippersVacuum grippers 120x230
Dimensions
230
93T
C77
TL
120
260
46
65
92
20
20
Ø 10
40
40
Ø20
b
a
c
118
d
e
P20 P40
a = Fixing with M6 screws b = 10 mm quick-fitting c = 20 mm foam rubber mat d = 50 boreholes
e = 15 boreholes
114 Phone 1 (800) 913 7002
Vacuum gripping systems | Vacuum grippersVacuum grippers 120x400
Vacuum grippers 120x400
Product Description
> Use in virtually all automated handling processes: Palletising, de-palletising, separating, sorting > Integrated vacuum generation > TL Design: with flow resistor > TC Design: with valve technology, allows unoccupied suction openings to be sealed, thereby saving energy > Contamination-proof design ensures high availability and process safety > Suitable for fast cycle times > Simple installation and operation > Fast and easy replacement of the foam mats
Technical Data
Item no. Air
con
sum
ptio
n at
87
psi
[sc
fm]
Suct
ion
pow
er
agai
nst
at
mos
ph
ere
[scf
m]
Fin
al v
acu
um
[%]
Wei
ght
[lb
s]
Suit
able
foa
m m
at
TL120x400-P20 7.4 13.9 60 5.5 PPF120.400-P20
TC120x400-P20 7.4 12.6 60 7.8 PPF120.400-P20
TL120x400-P40 3.7 6.9 60 5.5 PPF120.400-P40
TC120x400-P40 3.7 12.6 60 7.8 PPF120.400-P40
Diagrams
> Holding force at 87 psi depending on the vacuum when working with different permeable materials (values at 100% coverage of the vacuum gripper / 80% coverage – for TL design – is recommended)
Gri
ppin
g fo
rce
at 8
7 ps
i [N
]
Vacuum [%]0
040 60
900
800
700
600
500
400
300
200
100
20
semi-permeable,e.g. wood
porous, e.g. carton
non-permable, e.g. steel
Gri
ppin
g fo
rce
at 8
7 ps
i [N
]
Vacuum [%]0
040 60
900
800
700
600
500
400
300
200
100
20
semi-permeable,e.g. wood
porous, e.g. carton
non-permable, e.g. steel
TL120x400-P20 | TL120x400-P40 TC120x400-P20 | TC120x400-P40
115www.fi pa.com
Vacuum gripping systems | Vacuum grippersVacuum grippers 120x400
Dimensions
4 00 120
93
TC
77
TL
100
7565
20
20
Ø10
4 0
40
Ø20
c
ba
de
P20 P40
a = Fixing with M6 screws b = 10 mm quick-fitting c = 20 mm foam rubber mat d = 95 boreholes
e = 30 boreholes
116 Phone 1 (800) 913 7002
Vacuum gripping systems | Vacuum grippersVacuum grippers 200x400
Vacuum grippers 200x400
Product Description
> Use in virtually all automated handling processes: Palletising, de-palletising, separating, sorting > Integrated vacuum generation > TL Design: with a flow resistor > TC Design: with valve technology, allows unoccupied suction openings to be sealed, thereby saving energy > Contamination-proof design ensures high availability and process safety > Suitable for fast cycle times > Simple installation and operation > Fast and easy replacement of the foam mats
Technical Data
Item no. Air
con
sum
ptio
n at
87
psi
[sc
fm]
Suct
ion
pow
er
agai
nst
at
mos
ph
ere
[scf
m]
Fin
al v
acu
um
[%]
Wei
ght
[lb
s]
Suit
able
foa
m m
at
TL200x400-P20 14.7 27.7 60 8.6 PPF200.400-P20
TC200x400-P20 14.7 0.1 60 13.6 PPF200.400-P20
TL200x400-P40 7.4 27.7 60 8.6 PPF200.400-P40
TC200x400-P40 7.4 25.2 60 13.6 PPF200.400-P40
Diagrams
> Holding force at 87 psi depending on the vacuum when working with different permeable materials (values at 100% coverage of the vacuum gripper / 80% coverage – for TL design – is recommended)
Gri
ppin
g fo
rce
at 8
7 ps
i [N
]
Vacuum [%]0
040 60
1600
1400
1200
1000
800
600
400
200
20
semi-permeable,e.g. wood
porous, e.g. carton
non-permable, e.g. steel
Gri
ppin
g fo
rce
at 8
7 ps
i [N
]
Vacuum [%]0
040 60
1600
1400
1200
1000
800
600
400
200
20
semi-permeable,e.g. wood
porous, e.g. carton
non-permable, e.g. steel
TL200x400-P20 | TL200x400-P40 TC200x400-P20 | TC200x400-P40
117www.fi pa.com
Vacuum gripping systems | Vacuum grippersVacuum grippers 200x400
Dimensions
20
20
Ø10
4 0
40
Ø2
0
4 00 200
93
TC
77
TL
100
8075162,5
c
b
a
de
P20 P40
a = Fixing with M6 screws b = 10 mm quick-fitting c = 20 mm foam rubber mat d = 171 boreholes
e = 50 boreholes
118 Phone 1 (800) 913 7002
Vacuum gripping systems | Vacuum grippersVacuum grippers 160x600
Vacuum grippers 160x600
Product Description
> Use in virtually all automated handling processes: Palletising, de-palletising, separating, sorting > Integrated vacuum generation > TL Design: with a flow resistor > TC Design: with valve technology, allows unoccupied suction openings to be sealed, thereby saving energy > Contamination-proof design ensures high availability and process safety > Suitable for fast cycle times > Simple installation and operation > Fast and easy replacement of the foam mats
Technical Data
Item no. Air
con
sum
ptio
n at
87
psi
[sc
fm]
Suct
ion
pow
er
agai
nst
at
mos
ph
ere
[scf
m]
Fin
al v
acu
um
[%]
Wei
ght
[lb
s]
Suit
able
foa
m m
at
TL160x600-P20 14.7 27.7 60 10.1 PPF160.600-P20
TC160x600-P20 14.7 0.1 60 15.9 PPF160.600-P20
TL160x600-P40 7.4 13.9 60 10.1 PPF160.600-P40
TC160x600-P40 7.4 25.2 60 15.9 PPF160.600-P40
Diagrams
> Holding force at 87 psi depending on the vacuum when working with different permeable materials (values at 100% coverage of the vacuum gripper / 80% coverage – for TL design – is recommended)
Gri
ppin
g fo
rce
at 8
7 ps
i [N
]
Vacuum [%]0
040 60
1800
1600
1400
1200
1000
800
600
400
200
20
semi-permeable,e.g. wood
porous, e.g. carton
non-permable, e.g. steel
Gri
ppin
g fo
rce
at 8
7 ps
i [N
]
Vacuum [%]0
040 60
1800
1600
1400
1200
1000
800
600
400
200
20
semi-permeable,e.g. wood
porous, e.g. carton
non-permable, e.g. steel
TL160x600-P20 | TL160x600-P40 TC160x600-P20 | TC160x600-P40
119www.fi pa.com
Vacuum gripping systems | Vacuum grippersVacuum grippers 160x600
Dimensions
20
20
Ø10
4 0
40
Ø20
600 160
93
TC
77
TL
100
6575262,5
c
b
a
de
P20 P40
a = Fixing with M6 screws b = 10 mm quick-fitting c = 20 mm foam rubber mat d = 203 boreholes
e = 60 boreholes