*1 Included batteries vary by country or area.*2 As of April 2016. Among 36V cordless rotary hammers made by leading power tool manufacturers (surveyed by Hitachi Koki).*1 Included batteries vary by country or area.*2 As of April 2016. Among 36V cordless rotary hammers made by leading power tool manufacturers (surveyed by Hitachi Koki).

Ah6.0 /2.6Ah Lithium-ion Battery*1

Cordless Rotary HammersDH 36DBL

DH 36DBL

36V 6.0Ah/2.6Ah DH 36DBQL 36V 6.0Ah/2.6Ah

Capacity

Bit Shank

Battery

No Load Speed

Full Load Impact Rate

Overall Length

Weight*1

Standard Accessories

*1 Weight according to EPTA-Procedure 01/2003.*2 The vibration total values were determined according to EN60745.*3 The BSL3660 and BSL3626X are compatible with the DH36DBL and DH36DBQL only. Included batteries vary by country or area.

Concrete

Steel

Wood

Voltage

Power Output

28mm (1-1/8” )

13mm (1/2” )

32mm (1-1/4” )

SDS-plus

36V

216Wh for BSL3660 / 94Wh for BSL3626X

0 - 1,100/min

0 - 4,300/min

390mm (15-23/64”)

4.8kg (10.6lbs.)

Vibration emission value ah, HD = 16.0 m/s2

Uncertainty K = 1.5 m/s2

Uncertainty K = 1.5 m/s2

Vibration emission value ah, HD = 17.0 m/s2

Vibration emission value ah, CHeq = 12.2 m/s2

2 Batteries (BSL3660 or BSL3626X)*3, Charger (UC36YSL), Side Handle,Depth Gauge, Battery Cover,Carrying Case

Drill Chuck Holder2 Batteries (BSL3660 or BSL3626X)*3, Charger (UC36YSL), Side Handle,Depth Gauge, Battery Cover,Carrying Case

Vibration emission value ah, CHeq = 11.6m/s2

423mm (16-21/32”)

5.0kg (11.0lbs.)

Vibration Total Values (triax vector sum)*2

Hammer drilling into concrete

Equivalent chiseling value

DH36DBL DH36DBQLSpecifications

DH 36DBL

DH 36DBQL

Optional Accessories

6.0Ah 2.6Ah

6.0Ah 2.6Ah

Drilling Drill Bit (SDS-plus shank) 13mm Hammer Drill Chuck Set

(for the straight bit shank)

4.0 (5/32”) 5.0 (13/64”) 5.0 (13/64”) 5.5 (7/32”) 6.0 (15/64”) 6.0 (15/64”) 6.4 (1/4”) 6.5 (1/4”) 7.0 (9/32”) 7.5 (19/64”) 8.0 (5/16”) 8.5 (21/64”) 9.0 (23/64”) 9.5 (3/8”)10.0 (25/64”)10.0 (25/64”)10.5 (13/32”)10.5 (13/32”)11.0 (7/16”)12.0 (15/32”)12.0 (15/32”)12.5 (31/64”)12.5 (31/64”)12.7 (1/2”)12.7 (1/2”)13.0 (33/64”)14.0 (35/64”)14.3 (9/16”)14.3 (9/16”)14.5 (37/64”)14.5 (37/64”)15.0 (19/32”)16.0 (5/8”)16.0 (5/8”)16.5 (21/32”)17.0 (43/64”)17.0 (43/64”)17.5 (11/16”)17.5 (11/16”)18.0 (45/64”)19.0 (3/4”)20.0 (25/32”)22.0 (55/64”)24.0 (15/16”)25.0 (63/64”)

110 (4-21/64”)110 (4-21/64”)160 (6-19/64”)110 (4-21/64”)110 (4-21/64”)160 (6-19/64”)160 (6-19/64”)160 (6-19/64”)160 (6-19/64”)160 (6-19/64”)160 (6-19/64”)160 (6-19/64”)160 (6-19/64”)160 (6-19/64”)160 (6-19/64”)260 (10-15/64”)160 (6-19/64”)260 (10-15/64”)160 (6-19/64”)160 (6-19/64”)260 (10-15/64”)160 (6-19/64”)260 (10-15/64”)160 (6-19/64”)260 (10-15/64”)160 (6-19/64”)160 (6-19/64”)160 (6-19/64”)260 (10-15/64”)160 (6-19/64”)260 (10-15/64”)160 (6-19/64”)160 (6-19/64”)260 (10-15/64”)160 (6-19/64”)160 (6-19/64”)260 (10-15/64”)160 (6-19/64”)260 (10-15/64”)160 (6-19/64”)260 (10-15/64”)260 (10-15/64”)260 (10-15/64”)250 (9-27/32”)450 (17-23/32”)

50 (1-31/32”) 50 (1-31/32”)100 (3-15/16”) 50 (1-31/32”) 50 (1-31/32”)100 (3-15/16”)100 (3-15/16”)100 (3-15/16”)100 (3-15/16”)100 (3-15/16”)100 (3-15/16”)100 (3-15/16”)100 (3-15/16”)100 (3-15/16”)100 (3-15/16”)200 (7-7/8”)100 (3-15/16”)200 (7-7/8”)100 (3-15/16”) 88 (3-15/32”)187 (7-23/64”) 88 (3-15/32”)187 (7-23/64”) 88 (3-15/32”)187 (7-23/64”) 87 (3-27/64”) 87 (3-27/64”) 87 (3-27/64”)186 (7-21/64”) 87 (3-27/64”)186 (7-21/64”) 85 (3-11/32”) 85 (3-11/32”)186 (7-21/64”) 85 (3-11/32”) 85 (3-11/32”)185 (7-9/32”) 90 (3-35/64”)185 (7-9/32”) 90 (3-17/32”)185 (7-9/32”)175 (6-57/64”)175 (6-57/64”)173 (6-13/16”)375 (14-49/64”)

303571303575303578303576303577303579303580303581303582303583303584303585303586303587303588303604303589303605303590303591303606303592303607303593303608303594303595303596303609303597303610303598303599303611303600303601308485303602303612303603303613303614303615308486303616

Bolt placing operation with Chemical Anchor

Bull Point (SDS-plus shank)

Cutter (SDS-plus shank)

Grooving Chisel (SDS-plus shank)

Cold Chisel (SDS-plus shank)

Demolition

D

L2L1

D (mm) L1 (mm) L2 (mm) Code No.

Part Name

Rubber Cap Chuck HandleChuck Adapter (G) (SDS-Plus)Drill Chuck (13VLRB-D) with Chuck WrenchSpecial Screw (M6 left-hand threaded)Chuck HandleDrill Chuck and Adapter Set inc. Drill Chuck (13VLRB-D) and Chuck Adapter

13mm (33/64”) Hammer Drill Chuck Set inc. Chuck Handle and Rubber Cap

Code No.

303332

321825

303335303334303623321814995344303334

Socket Square Size (mm)12.7 (1/2”)19.0 (3/4”)

Code No.303044303045

L (mm)

250 (10”)

Code No.Bull PointRoundSquare

303046316656

Part Name150 (6”)250 (10”)250 (10”)150 (6”)250 (10”)

L (mm) W (mm)40 (1-9/16”)40 (1-9/16”)23.5 (59/64”)20 (3/4”)20 (3/4”)

Code No.323548316658316659323549316657

Cutter

Cold Chisel

Grooving Chisel

Top-Class*2

Capabilities

Fast Change betweenSDS-plus drill bit holder Drill chuck holderand

High Efficiency & Maintenance-Free Brushless Motor

Dust ExtractionDust Cup

Dust Collector (B) Ass’y

Grease for Rotary HammerOther accessories

Part Name Dust Extraction System for DH36DBLDust Extraction System for DH36DBQLDust CupDust Collector (B) Ass’y

Code No.402933402934971787306885

Volume500g 60g

Code No.335781335782

Note: Use a drill bit not longer than 166mm.

(for DH36DBL)

Make sure to use the genuine grease designated by us.

Note: Do not use No. 980927 or No. 981840 grease for the DH36DBL and DH36DBQL.

（500g） （60g）

Dust Extraction SystemChemical Anchor Adapter (SDS-plus shank)

Available late 2016.

DH 36DBQL

Top-class

The cordless rotary hammers that have it all

The grip of the handle and the drill bit headare on the same line of action, which makes applying force to drill easier.

When the tool bit is suddenly overburdened during operation, the slip clutch works or the tool’s built-in controller stops the motor’s output before the entire tool jerks.

Free from trouble including armature burnout, layer short or commutator wear even in severe work environments.

The chisel can be rotated in multiple angles with the change lever positioned at ‘neutral’.

Multiple bit-angle settings

Significantly extended product life cycle

No carbon brush replacement required.

NEW 36V Lithium-ion Battery

BSL 3660

Reactive Force Control

Improved handling

Caution!

Depending on operating conditions, the Reactive Force Control function may not work or may not provide the specified performance. Make sure that the workpiece is placed and supported properly, and that the main unit is held firmly during operation.

Top-class Runtime

Fast Chargingoffered by Hitachi’s original charging technology

Drill bit head

Grip of the handle

The grip of the handle is close to the center of gravity for easier handling.

385Up to

BSL 366036V

drastically reduces charging time by efficiently cooling both the battery and charger at the same time during charging.

Built-in cooling system

6.0Ah

Center of gravity

*1 As of April 2016. Among 36V cordless rotary hammers made by leading power tool manufacturers (surveyed by Hitachi Koki).*2 A comparison between the DH36DBL and the previous model DH36DAL (the value may vary according to conditions).*3 Compatible with the DH36DBL and DH36DBQL only.*4 Included batteries vary by country or area.

Grip of the handle

BrushlessMotorBrushlessMotorMore durability.Longer motor life.

Maintenance-free

Top-Class*1 Capabilities

The highly efficient brushless motor and the optimized hammering mechanism achieves the top-class*1 drilling speed and demolition performance.

Drilling Speed

Demolition Performance

Drilling Speed

Demolition Performance

*1 Top-class *1

*1

*3 *4

*4*3

15%Faster

Up to *2

1.4XUp to

*2

Number of 40mm deep holes drilled into concrete with a 8.5 drill bit

holes per charge

min.

Approx.

602.6Ah

min.

Approx.

25

● Lithium-ion batteries that exceed a power output of 100Wh are considered to be in the freight classification of Dangerous Goods and will require special application procedures.

● For transportation abroad, you must comply with international law and the rules and regulations of the destination country.

Notify the transporting company that a package contains a lithium-ion battery, inform the company of its power output and follow the instructions of the transportation company when arranging transport.

REGARDING LITHIUM-ION BATTERY TRANSPORTATION

WARNING

More

*4

*4

Convenient carrying case

Large charge indicator lamp with 4 color LED status lights

Low-temperature charge (-10°and above)

Battery capacity lamp (4 stages)

The rotary hammer can be stored in the case with the side handle attached.

allows for fast change between the SDS-plus drill bit holder and the drill chuck holder (DH36DBQL only).

Quick-release tool retainer

SDS-plus drill bit holder

CHANGE

Drill chuck holder

*Bit is optional

Note : Turn the change lever to "Hammering only" mode when replacing a tool retainer with another.　　　Use the machine only in "Rotation only" mode when the drill chuck holder installed.

NEW UC 36YSL 36V