120

MDM

CENTRIFUGAL MONOBLOC PUMPS according to DIN 24255 standard in cast iron

Close-coupled Mono-bloc centrifugal pump in accordance to DIN 24255 pump performance.Applications include water boosting, cold and hot water systems, air-conditioning, washing systemsand most industrial applications. Available in 2 versions, MDM in 2 Pole and MDM4 in 4 Pole.

SPECIFICATIONS MATERIALS• Maximum working pressure : 10 bar • Casing, impeller in GG-20• Maximum liquid temperature • Pump shaft: AISI 304

Standard version : -10˚C to +90˚C • Mechanical seal in carbon/ceramic/NBRSpecial version -20˚C to +120˚C

(optional, upon request) TECHNICAL DATA• 2 pole motor

UP TO REQUEST: COUNTER FLANGES SET • IP55 protection, insulation Class F• Scope of supply: counter flanges suction/discharge • Suitable for continuous operations

side, gasket and bolts. • 230/400V ± 10%, 50Hz up to 4kW inclusive 400/690V ± 10%, 50Hz

PERFORMANCE TABLE

HP

121

Pump type kW HP Q=Capacity

l/min 133 167 200 233 267 300 333 367 400 450 500 567 633 700 757 833 1000 1167 1333

Three-phase m3/h 8 10 12 14 16 18 20 22 24 27 30 34 38 42 46 50 60 70 80H=Total head

MDM4 65/125-0.55 0.55 0.75 - - - - - - 4.7 4.6 4.5 4.4 4.3 3.9 3.7 3.4 2.8 2.1 - - -MDM4 65/125-0.75 0.55 0.75 - - - - - - 5.7 5.7 5.6 5.5 5.4 5.2 4.8 4.6 4.3 3.9 2.5 - -MDM4 65/125-1.1 1.10 1.50 - - - - - - 7 6.9 6.8 6.7 6.6 6.4 6.2 6 5.8 5.4 4.4 2.8 -MDM4 65/160-1.1 1.10 1.50 - - - - - - - - 7.7 7.7 7.6 7.5 7.3 7.1 6.8 6.5 5.8 4.8 -MDM4 65/160-1.5 1.50 2.00 - - - - - - - - 9.3 9.2 9 8.9 8.9 8.8 8.7 8.6 7.8 6.8 5.7MDM4 65/160-2.2 2.20 3.00 - - - - - - - - 11.2 11.2 11.2 11 11 10.8 10.6 10.4 9.8 8.8 7.8MDM4 65/200-3 3.0 4.00 - - - - - - - - 16 15.9 15.8 15.6 15.4 15.2 15.1 15 14 12.6 -MDM4 65/250-5 4.00 5.50 - - - - - - - - - - - 19 18.8 18 17.8 16.4 - - -MDM4 65/250-5.5 5.50 7.50 - - - - - - - - - - - - 24.6 24.4 24.2 24 23 22 21MDM4 65/250-7.5 7.50 10.00 - - - - - - - - - - - - - 25.6 25.2 25 24 22.2 20

Pump type kW HP Q=Capacity

l/min 400 450 500 550 600 666 700 800 1000 1200 1333 1400 1500 1700 2000 2100 2300 2666 3000

Three-phase m3/h 24 27 30 33 36 40 42 50 60 72 80 84 90 102 120 126 138 160 180H=Total head

MDM 50/200-15 15.0 20.0 - - - - - 54 54 53 51 49 45 43 40 35 - - - - -MDM 50/200-18.5 18.5 25.0 - - - - - 60 60 59 57.5 55.5 52.5 50 48.5 43.5 - - - - -MDM 50/200-22 22.0 30.0 - - - - - 66 66 65 64 62 59 57 55 51 - - - - -MDM 50/250-15 15.0 20.0 - - - - - 59 59 56 52 45.5 38 - - - - - - - -MDM 50/250-18.5 18.5 25.0 - - - - - 65 65 63 59 55.5 48 - - - - - - - -MDM 50/250-22 22.0 30.0 - - - - - 74 74 73 70 65.5 58 54 50 - - - - - -MDM 80/160-7.5 7.5 10.0 - - - - - - - - 23.5 23 22.5 21 21.5 20.5 16.5 14 10 - -MDM 80/160-9.2 9.2 12.5 - - - - - - - - 27 26.5 26 25.5 25 23.5 20.5 19 15 - -MDM 80/160-11 11.0 15.0 - - - - - - - - 20.5 30 29.5 29 28.5 27 25 23.5 20.5 14 -MDM 80/160-15 15.0 20.0 - - - - - - - - 35 35 34.5 34 34 33 31.5 30 28 22.5 15MDM 80/160-18.5 18.5 25.0 - - - - - - - - 39.5 39.5 39 38.5 38 37 36 35 34 29 22MDM 80/160-22 22.0 30.0 - - - - - - - - 44 44 43.5 43.5 43 42.5 41.5 41 39 36 30.5

MDM

PERFORMANCE TABLE

MDM - 2900 r.p.m.

MDM - 1450 r.p.m.Pump type kW HP Q=Capacity

l/min 67 100 133 167 200 233 267 300 333 367 400 450 500 567 633 700 767 833 1000

Three-phase m3/h 4 6 8 10 12 14 16 18 20 22 24 27 30 34 38 42 46 50 60H=Total head

MDM4 32/125-0.55 0.55 0.75 6 5.4 4.6 3 - - - - - - - - - - - - - - -MDM4 32/160-0.55 0.55 0.75 11 10.8 10.2 9.7 9 8 7 - - - - - - - - - - - -MDM4 32/200-0.55 0.55 0.75 13 12.5 11.5 10.3 8 - - - - - - - - - - - - - -MDM4 32/200-0.75 (A) 0.75 1.00 16 15.5 13.5 11.7 - - - - - - - - - - - - - -MDM4 32/200-0.75 (B) 0.75 1.00 - 12 11.8 11.6 11 10 8.5 - - - - - - - - - - - -MDM4 32/200-1.1 1.10 1.50 - 17 16.8 16.5 16 15.5 14.7 13.4 11.8 - - - - - - - - - -MDM4 32/250-1.5 1.50 1.00 - 19 18.8 18 16.8 14.8 - - - - - - - - - - - - -MDM4 32/250-2.2 2.20 3.00 - 26 25.2 25 24.1 23 21 - - - - - - - - - - - -MDM4 40/125-0.55 0.55 0.75 - - 6.5 6.3 6.1 5.9 5.5 5.1 4 3.3 - - - - - - - - -MDM4 40/160-0.55 0.55 0.75 - - 8.7 8.6 8.4 8.2 7.9 7.4 6.7 5 - - - - - - - - -MDM4 40/160-0.75 (A) 0.75 1.00 - - 10.4 10.3 10.2 10.1 9.8 9.4 9 8.3 7.7 6 - - - - - - -MDM4 40/160-0.75 (B) 0.75 1.00 - - - - 8.8 8.7 8.5 8.3 8.1 7.9 7.7 7 6.3 - - - - - -MDM4 40/160-1.1 (B) 1.10 1.50 - - - - 12 11.8 11.6 11.4 11.2 11 10.8 10.3 9.8 8.8 - - - - -MDM4 40/200-1.1 1.10 1.50 - - - - 13.5 13.3 13 12.3 11.7 11 10 8 - - - - - - -MDM4 40/250-1.5 1.50 2.00 - - - - 16.5 16 15.5 15 14.5 13 12.5 11 - - - - - - -MDM4 40/250-2.2 2.20 3.00 - - - - 22 21.5 21 20.5 20 19.5 19 18 17 - - - - - -MDM4 40/250-3 3.00 4.00 - - - - 25 24.7 24.4 24 23.5 23.1 22.7 21.5 20 17.5 - - - - -MDM4 50/125-0.55 0.55 0.75 - - - - - 6.5 6.4 6.3 6.1 6 5.8 5.4 5 4.1 3.2 - - - -MDM4 50/160-0.75 0.75 1.00 - - - - - 7.2 7.2 7.1 7 6.9 6.8 6.6 6.4 5.9 5.6 5.2 4.6 - -MDM4 50/160-1.1 1.10 1.50 - - - - - - - - 9.2 9.1 9 8.9 8.8 8.3 7.8 7.3 6.9 6.6 -MDM4 50/160-1.5 1.50 2.00 - - - - - - - - 11.5 11.4 11.3 11.2 11 10.6 10.2 10 9.7 9 7.8MDM4 50/200-2.2 2.20 3.00 - - - - - - - - 15.8 15.7 15.6 15.2 15 14.6 14.2 13.6 12.8 11.8 -MDM4 50/250-3 3.00 4.00 - - - - - - - - 20.8 20.5 20.2 19.9 19.6 18.3 17.4 16 14.2 12 -MDM4 50/250-4 4.00 5.50 - - - - - - - - 25 24.8 24.6 24.4 24.4 24 23.6 22.2 21.8 20.2 16

122

MDM

PERFORMANCE TABLE

MDM4 - 1450 r.p.m.Pump type kW HP Q=Capacity

l/min 567 633 700 767 833 1000 1167 1333 1500 1667 1833 2000 2166 2333 2500 2666 2833 3000 3166

Three-phase m3/h 34 38 42 46 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190H=Total head

MDM4 80/160-1.5 1.5 2.0 7.9 7.8 7.7 7.6 7.2 6.6 5.6 4 - - - - - - - - - - -MDM4 80/160-2.2 2.2 3.0 9.8 9.8 9.7 9.6 9.5 9 8.2 7.2 5.6 - - - - - - - - - -MDM4 80/160-3 3.0 4.0 11 11 10.9 10.8 10.7 10.3 9.8 8.8 7.8 5.7 - - - - - - - - -MDM4 80/200-3 3.0 4.0 12 12 11.8 11.8 11.6 11.2 10.6 9.8 8.8 - - - - - - - - - -MDM4 80/200-4 4.0 5.5 14.8 14.7 14.6 14.6 14.5 14.2 13.8 13 12.2 - - - - - - - - - -MDM4 80/200-5.5 5.5 7.5 17.3 17.2 17.1 17.1 17 16.8 16.6 16 15.4 14.5 - - - - - - - - -MDM4 80/250-7.5 7.5 10.0 - - - 23 22.8 22.7 22.4 21.8 21 20 18 - - - - - - - -MDM4 80/250-9.2 9.2 12.5 - - - 25.4 25.3 25 24.7 24.2 23.6 22.7 21.6 - - - - - - - -

MDM4 - 1450 r.p.m.Pump type kW HP Q=Capacity

l/min 567 633 700 767 833 1000 1250 1500 1750 2000 2250 2500 2750 3000 3250 3733 4000 4500 5000

Three-phase m3/h 34 38 42 46 50 60 75 90 105 120 135 150 165 180 195 224 240 270 300H=Total head

MDM4 100/200-3 3.0 4.0 - - - - - 9.6 9.4 8.8 7.8 - - - - - - - - - -MDM4 100/200-4 4.0 5.0 - - - - - 11.7 11.4 10.9 10 9.5 - - - - - - - - -MDM4 100/200-5.5 5.5 7.5 - - - - - - 12.2 11.9 11.5 11 10.4 9.4 8.4 - - - - - -MDM4 100/200-7.5 7.5 10.0 - - - - - - 16 15.6 15.2 15 14 12.7 11.5 - - - - - -MDM4 100/200-9.2 9.2 12.5 - - - - - - - 16.5 16 15.7 14.7 14 12.8 11.8 - - - -MDM4 100/250-11 11.0 15.0 - - - - - - - 22 21.8 21 20 19 18 16.4 - - - - -MDM4 100/250-15 15.0 20.0 - - - - - - - 25.2 25 24.5 23.6 22.8 21.6 20.2 19 - - - -MDM4 100/315-11 11.0 15.0 - - - - - - - 23.7 22.5 21.5 21 18 17 15 - - - - -MDM4 100/315-15 15.0 20.0 - - - - - - - 27 26.5 26 25.5 25 23 22.5 22 - - - -MDM4 100/315-18.5 18.5 25.0 - - - - - - - - 30 29 27.5 27 26.5 26 25 25.5 - - -MDM4 100/315-22 22.0 30.0 - - - - - - - - 34 33.5 33 32.5 32 28 28 26 - - -

MDM4 - 1450 r.p.m.Pump type kW HP Q=Capacity

l/min 567 633 700 767 833 1000 1250 1500 1750 2000 2500 3000 3500 4000 4500 5000 5500 6000 6666

Three-phase m3/h 34 38 42 46 50 60 75 90 105 120 150 180 210 240 270 300 330 360 400H=Total head

MDM4 125/250-9.2 9.2 12.5 - - - - - - - - - 13.5 13 12 11 9.5 8.8 - - - -MDM4 125/250-11 11.0 15.0 - - - - - - - - - 16 15 14.5 13.5 12 11.5 - - - -MDM4 125/250-15 15.0 20.0 - - - - - - - - - - 17 16.5 16 15 14 12 - - -MDM4 125/250-18.5 18.5 25.0 - - - - - - - - - - 21.5 20.5 19 18 17 16 14 - -MDM4 125/250-22 22.0 30.0 - - - - - - - - - - 24 23.5 22.5 22 20 18.5 17.5 16 -

MDM4 - 1450 r.p.m.Pump type kW HP Q=Capacity

l/min 700 767 833 1000 1250 1500 1750 2000 2500 3000 3500 4000 4666 4333 6000 6666 7333 80000 8666

Three-phase m3/h 42 46 50 60 75 90 105 120 150 180 210 240 280 320 360 400 440 480 520H=Total head

MDM4 150/250-15 15.0 20.0 - - - - - - - - - - - 14 13 12 11 10 9 8 -MDM4 150/250-18.5 18.5 25.0 - - - - - - - - - - - 16.8 16 15 14 13 11.8 10 -MDM4 150/250-22 22.0 30.0 - - - - - - - - - - - 18.5 18.2 17.8 16.5 15.8 14.5 13.5 12

123

MDM

DIMENSION

MDM4, 1450 PRM MDM4, 1450 PRM

32/125

PUMPMOTOR DIMENSIONS mm

0.55 0.75 80 435 100 70 190 140 50 14 112 140 41

Kw HP a L m1 m2 n1 n2 b s h1 h2 Kg

32/160 0.55 0.75 80 435 100 70 240 190 50 14 132 160 51

32/200 0.55 0.75 80 435 100 70 240 190 50 14 160 180 53

32/200 0.75 1 80 435 100 70 240 190 50 14 160 180 55

32/200 1.1 1.5 80 450 100 70 240 190 50 14 160 180 58

32/250 1.5 2 100 490 125 95 320 250 65 14 180 225 65

32/250 2.2 3 100 555 125 95 320 250 65 14 180 225 68

40/125 0.55 0.75 80 435 100 70 210 160 50 14 112 140 43

40/160 0.55 0.75 80 435 100 70 240 190 50 14 132 160 53

40/160 0.75 1 80 435 100 70 240 190 50 14 132 160 54

40/160 1.1 1.5 80 445 100 70 240 190 50 14 132 160 59

40/200 1.1 1.5 100 465 100 70 265 212 50 14 160 180 62

40/250 1.5 2 100 490 125 95 320 250 65 14 180 225 68

40/250 2.2 3 100 555 125 95 320 250 65 14 180 225 71

40/250 3 4 100 590 125 95 320 250 65 14 180 225 74

50/125 0.55 0.75 100 455 100 70 240 190 50 14 132 160 47

50/160 0.75 1 100 455 100 70 265 212 50 14 160 180 56

50/160 1.1 1.5 100 465 100 70 265 212 50 14 160 180 57

50/160 1.5 2 100 500 100 70 265 212 50 14 160 180 60

50/200 2.2 3 100 555 100 70 265 212 50 14 160 200 64

50/250 3 4 100 555 125 95 320 250 65 14 180 225 82

50/250 4 5.5 100 590 125 95 320 250 65 14 180 225 85

65/125 0.55 0.75 100 455 125 95 280 212 65 14 160 180 49

65/125 0.75 1 100 455 125 95 280 212 65 14 160 180 50

65/125 1.1 1.5 100 465 125 95 280 212 65 14 160 180 54

65/160 1.1 1.5 100 465 125 95 280 212 65 14 160 200 60

65/160

65/160

1.5

2.2

2

3

100

100

490

555

125

125

95

95

280

280

212

212

65

65

14

14

160

160

200

200

62

66

65/200 3 4 100 555 125 95 320 250 65 14 180 225 74

65/250 4 5.5 100 625 160 120 360 280 30 18 200 250 95

65/250 5.5 7.5 100 725 160 120 360 280 30 18 200 250 110

65/250 7.5 10 100 725 160 120 360 280 30 18 200 250 120

125/250 22 30 140 925 160 120 400 315 30 18 250 325 230

150/250 15 20 150 970 200 150 550 450 100 23 280 400 225

150/250 18.5 25 160 940 200 150 550 450 100 23 280 400 265

150/250 22 30 160 940 200 150 550 450 100 23 280 400 275

80/160

PUMPMOTOR DIMENSIONS mm

1.5 2 125 515 125 95 320 250 65 14 180 225 64

Kw HP a L m1 m2 n1 n2 b s h1 h2 Kg

80/160 2.2 3 125 580 125 95 320 250 65 14 180 225 70

80/160 3 4 125 580 125 95 320 250 65 14 180 225 72

80/200 3 4 125 640 125 95 345 280 65 14 180 250 95

80/200 4 5.5 125 640 125 95 345 280 65 14 180 250 100

80/200 5.5 7.5 125 750 125 95 345 250 65 14 180 225 115

80/250 7.5 10 125 750 160 120 400 315 80 18 200 280 140

80/250 9.2 12.5 125 750 160 120 400 315 80 18 200 280 145

100/200 3 4 125 640 160 120 360 280 80 18 200 280 115

100/200 4 5.5 125 640 160 120 360 280 80 18 200 280 120

100/200 5.5 7.5 125 750 160 120 360 280 80 18 200 280 135

100/200 7.5 10 125 750 160 120 360 280 80 18 200 280 145

100/200 9.2 12.5 125 750 160 120 360 280 80 18 200 280 150

100/250 11 15 140 850 160 120 400 315 80 18 225 280 155

100/250 15 20 140 850 160 120 400 315 80 18 225 280 165

100/315 11 15 140 835 160 120 400 315 80 18 250 315 160

100/315 15 20 140 835 160 120 400 315 80 18 250 315 170

100/315 18.5 25 140 900 160 120 400 315 80 18 250 315 190

100/315 22 30 140 900 160 120 400 315 80 18 250 315 200

125/250 9.2 12.5 140 770 160 120 400 315 80 18 250 355 160

125/250 11 15 140 850 160 120 400 315 80 18 250 355 175

125/250 15 20 140 850 160 120 400 315 80 18 250 355 185

125/250 18.5 25 140 925 160 120 280 315 80 18 250 355 220

MDM4-32

PUMP

50 165 125 4 18 32 140 100 4 18

DN

ASPIRACION - SUCTION IMPULSION - DISCHARGE

BRIDAS - FLANGES PN - 16

Db Dt N. Ø DN Db Dt N. Ø

MDM4-40 65 185 145 4 18 40 150 110 4 18

MDM4-50 65 185 145 4 18 50 165 125 4 18

MDM4-65 80 200 160 8 18 65 185 145 4 18

MDM4-80 100 220 180 8 18 80 200 160 8 18

MDM4-100 125 250 210 8 18 100 220 180 8 18

MDM4-125 150 285 240 8 23 125 210 145 8 18

MDM4-150 200 340 295 8 23 150 240 160 8 23

124

MDM

DIMENSION

32/200

PUMPMOTOR DIMENSIONS mm

7.5 10 80 665 100 70 240 190 50 14 160 180 94

Kw HP a L m1 m2 n1 n2 b s h1 h2 Kg

32/200 9.2 12.5 80 765 100 70 240 190 50 14 160 180 104

32/250 9.2 12.5 100 785 125 95 320 250 65 14 180 225 109

32/250 11 15 100 785 125 95 320 250 65 14 180 225 119

32/250 15 20 100 785 125 95 320 250 65 14 180 225 126

40/200 9.2 12.5 100 785 100 70 265 212 50 14 160 180 105

40/250 11 15 100 785 125 95 320 250 65 14 180 225 123

40/250 15 20 100 785 125 95 320 250 65 14 180 225 130

40/250 18.5 25 100 785 125 95 320 250 65 14 180 225 135

40/250 22 30 100 855 125 95 320 250 65 14 180 225 180

50/200 15 20 100 785 100 70 265 212 50 14 160 200 121

50/200 18.5 25 100 785 100 70 265 212 50 14 160 200 136

50/200

PUMPMOTOR DIMENSIONS mm

22 30 100 855 100 70 265 212 50 14 160 200 171

Kw HP a L m1 m2 n1 n2 b s h1 h2 Kg

50/250 15 20 100 785 125 95 320 250 65 14 180 225 132

50/250 18.5 25 100 785 125 95 320 250 65 14 180 225 147

50/250 22 30 100 855 125 95 320 250 65 14 180 225 182

80/160 7.5 10 125 710 125 95 320 250 65 14 180 225 98

80/160 9.2 12.5 125 810 125 95 320 250 65 14 180 225 108

80/160 11 15 125 810 125 95 320 250 65 14 180 225 118

80/160 15 20 125 810 125 95 320 250 65 14 180 225 125

80/160 18.5 25 125 810 125 95 320 250 65 14 180 225 140

80/160 22 30 125 880 125 95 320 250 65 14 180 225 175

MDM-32

PUMP

50 165 125 4 18 32 140 100 4 18

DN

ASPIRACION - SUCTION IMPULSION - DISCHARGE

BRIDAS - FLANGES PN - 16

Db Dt N. Ø DN Db Dt N. Ø

MDM-40 65 185 145 4 18 40 150 110 4 18

MDM-50 65 185 145 4 18 50 165 125 4 18

MDM-65 80 200 160 8 18 65 185 145 4 18

MDM-80 100 220 180 8 18 80 200 160 8 18

MDM-100 125 250 210 8 18 100 220 180 8 18

MDM, 2900 RPM MDM, 2900 RPM

125

FSD

MONO-BLOC PUMPS

APPLICATIONS FEATURES• General water supply • High efficiency means lower energy consumption.• Hot/cold water circulation Direct motor drive permits compact design.• Industrial water • Back Pull Out type – can be disassembled and inspected• Irrigation without removing the suction/discharge piping or

the thermal insulation materials.• Direct motor drive eliminates the noise and vibration

that can occur with direct coupling.• Top centreline discharge, foot support under casing for maximum

resistance to misalignment and distortion from pipe loads.

Standard OptionalLiquid Fresh water

0 ~ 80°C 81 ~ 100°CTemperature (32 ~ 176°F) (177~212°F)

Max. suction Shut off head--------------10.2 - Max.9.1(kg f/cm2)

pressure (kgf/cm2) 10-------------

Re.NPSH Below 4mSynchronous 3000 min-1/50 HzSpeed

Installation Indoors OutdoorsMaterialsCasing Cast ironImpeller Cast iron (except) Bronze

32 x 32 FSFD(Stainless steel)

FSHD..............BronzeShaft SUS 420 J2 except

32 x 32 FSFD (SUS 304)Flange JIS 10k

ConstructionImpeller type EnclosedStuffing box Mechanical sealBearing Sealed ball bearing

Bed................1Priming funnel& valve...........1

Accessories Companion flangewith bolts..........1 setAnchor bolts.....1 set

(excepting below 50 x 40ø)

126

FSD

SELECTION CHART 3000 min-1

40X32 FSED 5 • 4

Motor: output (kW)

Frequency (5: 50 Hz)

Model

Discharge size (mm)

Suction size (mm)

SYMBOLS

127

Size Output Pump and Motor Anchor bolt WeightModel kW Figure [Mass]

ø1 ø2 A B H D L P BM BN1 BN2 BY Fd Fl Fa Fb kg

32 x 32 FSFD5.25 0.25 B 65 264 132 140 329 22 130 60 60 230 M10 125 20 40 20

32 x 32 FSFD5.4 0.4 B 65 264 132 140 329 22 130 60 60 230 M10 125 20 40 21

32 32 32 x 32 FSFD5.75 0.75 B 65 284.5 132 140 349.5 22 130 60 60 230 M10 125 20 40 24

32 x 32 FSGD51.5 1.5 B 80 393 152 160 473 0 130 60 60 290 M10 125 20 40 34

32 x 32 FSGD52.2 2.2 B 60 393 152 160 473 0 130 60 60 290 M10 125 20 40 36

40 x 32 FSED5.4 0.4 B 65 306 120 125 371 22 130 60 60 230 M10 125 20 40 25

40 x 32 FSFD5.75 0.75 B 65 340.5 132 140 405.5 22 130 60 60 230 M10 125 20 40 25

40 32 40 x 32 FSGD51.5 1.5 B 80 393 152 160 473 0 130 60 60 290 M10 125 20 40 33

40 x 32 FSGD52.2 2.2 B 80 393 152 160 473 0 130 60 60 290 M10 125 20 40 36

40 x 32 FSGD53.7 3.7 B 80 426 167 160 506 0 270 65 45 290 M10 125 40 40 59

50 x 40 FSED5.4 0.4 B 65 306 132 140 371 22 130 60 60 230 M10 125 20 40 24

50 x 40 FSED5.75 0.75 B 65 340.5 132 140 405.5 22 130 60 60 230 M10 125 20 40 26

50 x 40 FSFD51.5 1.5 B 80 393 132 140 473 0 130 60 60 230 M10 125 20 40 34

50 40 50 x 40 FSGD52.2 2.2 B 80 393 152 160 473 0 130 60 60 290 M10 125 20 40 37

50 x 40 FSGD53.7 3.7 A 80 426 167 160 506 5 270 65 45 290 M10 125 40 40 58

50 x 40 FSHD55.5 5.5 A 80 488 195 180 568 5 270 65 45 290 M10 125 40 40 76

65 x 50 FSED5.75 0.75 B 80 353.5 132 140 433.5 0 130 60 60 230 M10 125 20 40 27

65 x 50 FSED51.5 1.5 B 80 393 132 140 473 0 130 60 60 230 M10 125 20 40 32

65 x 50 FSFD52.2 2.2 B 80 393 132 140 473 0 130 60 60 290 M10 125 20 40 3865 50

65 x 50 FSGD53.7 3.7 A 80 426 167 160 506 5 270 65 45 290 M10 125 40 40 59

65 x 50 FSHD55.5 5.5 A 100 488 195 180 588 5 270 65 45 350 M10 125 40 40 86

65 x 50 FSHD57.5 7.5 A 100 488 195 180 588 5 270 65 45 350 M10 125 40 40 90

80 x 65 FSED52.5 2.2 B 100 393 152 160 493 0 130 60 60 290 M10 125 20 40 37

80 x 65 FSFD53.7 3.7 A 100 443 167 160 543 5 270 65 45 290 M10 125 40 40 63

80 65 80 x 65 FSGD55.5 5.5 A 100 488 195 180 588 5 270 65 45 350 M10 125 40 40 85

80 x 65 FSGD57.5 7.5 A 100 488 195 180 588 5 270 65 45 350 M10 125 40 40 89

80 x 65 FSHD511 11 A 100 629 225 200 729 5 270 65 45 350 M12 160 55 50 130

FSD

DIMENSION

Model FSD

50 Hz

Note: 1. Motor specifications; Three phase induction motor, totally enclosed fan cooled.

128

LPD

VERTICAL IN-LINE CENTRIFUGAL PUMPS

APPLICATIONS FEATURES• Water supply • The two-pole and high speed system makes the pump compact,• Hot, cold water circulation light weight and minimise installation space.• Cooling tower • No floor space is required for installation.• Hot water supply • High allowable temperature (Max. 100˚C) and high suction

pressure (Max. 0.69MPa) are available.• Sealed ball bearing eliminates need of lubrication.• Mechanical seal facilitates maintenance.

Liquid Fresh water

Temperature 0~100°C

Re.NPSH Below 4m Except 80LPD 50Hz...Below 4.5m

Max. SuctionPressure

Construction Impeller Enclosed Shaft seal Mechanical seal Motor bearing Sealed ball

Pipe connection JIS 10K Flange

Material Casing Cast iron Impeller 304 Stainless steel ...50Hz: Size 50 & below with output 1.5kW & below

Bronze ...Except above model 304 stainless steel Shaft SUS 304 : (32-50 LPD) SUS 420 for other

Motor Totally Enclosed Fan Cooled

1.0MPa(10.2kgf/cm2)

Shut off head0.098MPa(10kgf/cm2)

Max. 0.69MPa(7kgf/cm2)

32~80LPD

SPECIFICATION

129

LPD

DIMENSION

SELECTION CHART : 50 Hz (Synchronous speed : 3000 min-1)

SYMBOLS

25 LPD 5 .05 S

Phase (S: single phase. Blank space : 3phase.)

Motor output (kW)

Frequency (5 : 50Hz)

Model

Size (mm)

130

Size Out- Pump and motorSA Model put Phase WeightDA kW A B D E I PW MW1 MW J G SG DG kg

25LPD5.05S 0.05 51 179 100 100 128 127 108 - 45 45 25 25 10

25LPD5.08S 0.08 Single 51 179 100 100 128 127 108 - 45 45 25 25 1025

25LPD5.15S 0.15 phase 51 217 120 120 142 160 110 - 40 45 25 25 13

25LPD5.25S 0.25 51 217 120 120 142 160 115 - 45 45 25 25 14

25 25LPD5.15 0.15 3 phase 51 217 120 120 142 160 - 140 23 15 25 25 13

LPD

DIMENSION

25LPD : With single phase motor

25LPD : With 3 phase motor

131

LPD

DIMENSION

32-50LPD : With single phase motor

32-80LPD : With 3 phase motor

Size Out- Pump and motorSA Model put Phase WeightDA kW A B D E I PW MW CL kg

32LPD5.25S 0.25 Single 68 284 140 140 130 196 95 200 1932

32LPD5.4S 0.4 phase 68 309 140 140 130 19 95 200 21

40LPD5.25S 0.25 Single 72 284 155 145 130 200 95 200 2040

40LPD5.4S 0.4 phase 72 309 155 145 130 200 95 200 22Single

50 50LPD5.4S 0.4 79 319 160 150 130 207 95 200 23phase

132

Size Out- Pump and motorSA Model put Phase WeightDA kW A B D E I PW MW G J kg

32LPD5.25 0.25 68 243 140 140 133 236 135 15 22 19

32 32LPD5.4 0.4 3 phase 68 243 140 140 133 236 135 15 22 20

32LPD5.75 0.75 68 269 140 140 170 246 145 15 22 23

40LPD5.25 0.25 72 143 155 145 133 240 135 15 22 20

40LPD5.4 0.4 72 243 155 145 133 240 135 15 22 21

40 40LPD5.75 0.75 3 phase 72 269 155 145 170 250 145 15 22 24

40LPD51.5 1.5 72 317 155 145 190 258 153 15 27 29

40LPD52.2 2.2 87 353 180 160 190 264 153 15 27 37

50LPD5.4 0.4 79 253 160 150 133 247 135 15 22 23

50LPD5.75 0.75 79 279 160 150 170 257 145 15 22 26

50 50LPD51.5 1.5 3 phase 79 327 160 150 190 265 153 15 27 31

50LPD52.2 2.2 83 360 160 150 190 262 153 15 27 37

50LPD53.7 3.7 95 413 175 165 222 303 183 11 27 59

65LPD5.75 0.75 90 323 175 165 170 264 145 15 22 32

65LPD51.5 1.5 90 36 175 165 190 272 153 15 27 37

65 65LPD52.2 2.2 3 phase 90 377 175 165 190 272 153 15 27 39

65LPD53.7 3.7 95 421 185 185 222 299 183 11 27 60

65LPD55.5 5.5 95 456 190 180 268 350 215 - 35 85

80LPD51.5 1.5 110 353 200 190 190 273 153 15 27 40

80LPD52.2 2.2 110 367 200 190 190 273 153 15 27 40

80LPD53.7 3.7 110 426 200 190 222 306 183 11 27 6380 3 phase

80LPD55.5 5.5 110 461 200 190 268 338 215 - 35 83

80LPD57.5 7.5 110 461 220 210 268 350 215 - 35 90

80LPD511 11 110 589 220 210 320 429 282 - 52 130

LPD

DIMENSION

Units : mm