Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
FOR MORE INFORMATION CALL: 1-800-BUY-MOENwww.moen.com
CRITICAL DIMENSIONS(DO NOT SCALE)
S p e c i f i c a t i o n s
Rev. 11/14
There is more than 1 version of this model. Page down to identify the version you have.
2" (50mm)
2-7/8" (73mm)
2" (50mm)
ESCUTCHEON DIA. 6-7/16" x 2-1/2"
(164mm x 64mm)
7-1/8" (181mm)
10-1/2" (267mm)
4-9/16" (116mm)
COLD 1/2" NPT INLET
HOT 1/2" NPT INLET
1"(25mm) MAX. DECK THICKNESS
MOEN®Two-Handle Bar Faucet
Models: 4903 series
NOTE: Designed to be installed through2 - 1” min. dia. holes 4” on center
DESCRIPTION• Metal construction with various finishes identified by suffixOPERATION• Mini blade style handles with hot and cold color indicators• Inlet shanks will accept 3/8” ball nose connectionsFLOW• Spout flow is limited to 1.5 gpm (5.7 L/min) at 60 psiCARTRIDGE• 1224 cartridge designSTANDARDS • Third party certified to IAPMO Green, ASME A112.18.1/CSA B125.1and all applicable requirements referenced therein including NSF 61/9
• Contains no more than 0.25% weighted average lead content• Complies with California Proposition 65 and with the Federal SafeDrinking Water Act
• ADA for lever handle
WARRANTY• Lifetime limited warranty against leaks, drips and finish defects
FOR MORE INFORMATION CALL: 1-800-BUY-MOENwww.moen.com
CRITICAL DIMENSIONS(DO NOT SCALE)
S p e c i f i c a t i o n s
DESCRIPTION• Chrome plated metal constructionOPERATION• Small lever styleFLOW• Aerator is limited to 2.0 gpm (7.6 L/m)CARTRIDGE• 1224 cartridge designSTANDARDS• Third party certified by CSA to meet CSA B-125, ASME A112.18.1M and all applicable requirements referenced therein and complies with the applicable requirements of ANSI A117.1
• Certified to ANSI/NSF 61/9• Complies with California Proposition 65 and with the Federal SafeDrinking Water Act
WARRANTY1• Lifetime limited warranty against leaks, drips and finish defects
MOEN®Two Handle Bar Faucet
Model: 4903, *87903
Bulk Model: *64904(Bulk packed 12 per carton)
*64904, 87903 Discontinued 2/1/2004
ADA
2"(51mm)
3-1/8"(79mm)
ESCUTCHEON
6-3/4" (171mm) x 2-3/8" (60mm)�
HOT INLET� COLD INLET�
6"(152mm)
3/4" (19mm)
MAX. DECK
THICKNESS�
8"(203mm)
2"(51mm)
3-1/4"(82mm)
Rev. 12/03
NOTE: DESIGNED TO INSTALLTHRU 2 HOLES 1" (25mm) MIN. DIA. AND 4" (102mm) ON CENTER