Embed Size (px)
Citation preview
1601 Shop Rd, Suite I, Columbia SC 29201 Ph. 803.929.1218 • fax 803.929.1219 • www.brabhamfence.com
Specifications Temp Fence Wire: 84” Tall, 9ga wire, with a 2-3/8” diamond mesh size. Line Post: Line post will be at least 1-5/8” O.D. x 10’ .080. Concrete footing will be optionally used in softer conditions, with a diameter of 6” and depth of 2’ in order to meet the load specifications as specified. Terminal Post: Terminal post will be at least 2-1/2” O.D. x 10’6” .080. with a concrete footing of 6” x 30”. Brace rails: 1-5/8” O.D. .080. Top and Bottom Tension wire: 12-1/2ga double strand twisted tension wire. Barbed Wire: 15-1/2ga, 4 point. Fittings: Pressed steel and galvanized. Ties: Aluminum ties. Aluminum hog rings for the tension wire Gates: 1-5/8” .080 frames, welded at all corners and intersections, wire and barbwire to match fence. (2) – 24’ opening and (1) - 12’ opening. Gate Support post: 3” x 11’ 40-wt, with a concrete footing of 12” x 36” depth. Screening Fabric: Color to be brown, 90 percent woven coverage, height of 6’8”, hog ringed to temp fence.
1601 Shop Rd, Suite I, Columbia SC 29201 Ph. 803.929.1218 • fax 803.929.1219 • www.brabhamfence.com
Specifications Permanent Fence Wire: 84” Tall, 9ga wire, with a 2” diamond mesh size. The top and bottom selvage will be twisted and barbed. The zinc coating covering the wire will be 1.2oz per sq. ft. Pipe: All pipes will be domestically made SS40, produce by Allied Tube and Conduit. Line Post: Line post will be 2-1/2” O.D. x 10’ SS40, Meeting FS RR-F-191/3, Class 1, Grade B, in accordance with ASTM F 1043, With Concrete footings measuring 12” in diameter, and 39” in depth. Terminal Post: Terminal post will be 3” O.D. x 10’6” SS40, Meeting FS RR-F-191/3, Class 1, Grade B, in accordance with ASTM F 1043, With Concrete footings measuring 16” in diameter, and 42” in depth. Top rails, and brace rails: 1-5/8” O.D. x 21’ SS40, Meeting FS RR-F-191/3, Class 1, Grade B, in accordance with ASTM F 1043 Bottom Tension wire: 7ga, Coil spring tension wire. Attached to bottom of chain link wire with the use of 9ga steel hog rings, compressed around chain link wire and tension wire every 24” O.C. Barbed Wire: Class 3, 12-1/2ga, 4 point. Fittings: Pressed steel and galvanized. See cut sheet. Ties: 9ga galvanized steel ties. Every 12” O.C. for line post, and every 24” O.C. for top and brace rails. Cantilever Gates: Aluminum welded frames, wire fill to match fence, barbed wire to match fence, height to match fence. See drawings. Cantilever Support post: 4” x 12’ SS40, Meeting FS RR-F-191/3, Class 1, Grade B, in accordance with ASTM F 1043, With Concrete footings measuring 24” in diameter, and 48” in depth.
Drawing NO.Revision NO.
Effective DateDrawn By:
Approved By/Date
Joshua Stidham
Truck AssemblyWith sealed roller bearings
Gate Opening - 20’-22’ Counterbalance - 9’8”-10’8”
Gate Latch
4” O.D. Sch40Posts
Uprights: 2” S.Q. .125 WallDiagonals: 1-1/4” S.Q. .125 WallTop Track: 6” x 3-1/4”Bottom Track: 3-1/4” x 3-1/4”All Material 6061-T6 Extruded
Default Specifications
SPS OnGuard 20’-22’ Aluminum Slide Gate With BarbProject:
SPS-OG-20-22-ASG+1
OnGuard Aluminum Fence Systems
BarbWireExtension Arms
Stop Bar(Ends Gate Travel)
Chain Link ShownNested in the Slot inSlot in the Track.
Truck Assembly
HangerBracket
Bottom GuideRoller
Bottom Guide
Bottom Track
TopTrack
Drawing NO.Revision NO.
Effective DateDrawn By:
Approved By/Date
Joshua Stidham
Truck AssemblyWith sealed roller bearings
Gate Opening - 30’ Counterbalance - 11’8”
Gate Latch
4” O.D. Sch40Posts
Uprights: 2” S.Q. .125 WallDiagonals: 1-1/4” S.Q. .125 WallTop Track: 6” x 3-1/4”Bottom Track: 3-1/4” x 3-1/4”All Material 6061-T6 Extruded
Default Specifications
SPS OnGuard 30’ Aluminum Slide Gate With BarbProject:
SPS-OG-30-ASG+1
OnGuard Aluminum Fence Systems
BarbWireExtension Arms
Stop Bar(Ends Gate Travel)
Chain Link ShownNested in the Slot inSlot in the Track.
Truck Assembly
HangerBracket
Bottom GuideRoller
Bottom Guide
Bottom Track
TopTrack
Drawing NO.Revision NO.
Effective DateDrawn By:
Approved By/Date
Joshua Stidham
Truck AssemblyWith sealed roller bearings
Gate Opening - 31’-33’
Gate Latch
4” O.D. Sch40Posts
Uprights: 2” S.Q. .125 WallDiagonals: 1-1/4” S.Q. .125 WallTop Track: 6” x 3-1/4”Bottom Track: 3-1/4” x 3-1/4”All Material 6061-T6 Extruded
Default Specifications
SPS OnGuard 31’-33’ Aluminum Slide Gate W/BarbProject:
SPS-OG-31-33-ASG+1
OnGuard Aluminum Fence Systems
Counterbalance - 13’8”-14’8”
2” Long Fillet Weld Every 14”Along Top of the Track.
2” Long Stitch WeldEvery 14” Along the Bottom
1/2” x 6” x 24”Splice Plate, Weld All Sides
Splice Detail Double TrackConstruction Detail
BarbWireExtension Arms
Chain Link Fabric
Stop Bar(Ends Gate Travel)
Chain Link ShownNested in the Slot inSlot in the Track.
Truck Assembly
HangerBracket
Bottom GuideRoller
Bottom Guide
Bottom Track
TopTrack
Drawing NO.Revision NO.
Effective DateDrawn By:
Approved By/Date
Joshua Stidham
Truck AssemblyWith sealed roller bearings
Gate Opening - 40’
Gate Latch
4” O.D. Sch40Posts
Uprights: 2” S.Q. .125 WallDiagonals: 1-1/4” S.Q. .125 WallTop Track: 6” x 3-1/4”Bottom Track: 3-1/4” x 3-1/4”All Material 6061-T6 Extruded
Default Specifications
SPS OnGuard 40’ Aluminum Slide Gate W/BarbProject:
SPS-OG-40-ASG+1
OnGuard Aluminum Fence Systems
Counterbalance - 19’8”
2” Long Fillet Weld Every 14”Along Top of the Track.
2” Long Stitch WeldEvery 14” Along the Bottom
1/2” x 6” x 24”Splice Plate, Weld All Sides
Splice Detail Double TrackConstruction Detail
BarbWireExtension Arms
Chain Link Fabric
Stop Bar(Ends Gate Travel)
Chain Link ShownNested in the Slot inSlot in the Track.
Truck Assembly
HangerBracket
Bottom GuideRoller
Bottom Guide
Bottom Track
TopTrack
Stephens Pipe & Steel, Inc. Aluminum Square Frame Gate Limited 5 Year Warranty
Stephens Pipe & Steel, LLC warrants, to the original purchaser of Stephens Pipe Aluminum Square Frame Gate, that it is free from
defects of material and workmanship. Stephens Pipe warrants that the gates will not fail during normal use for a period of 5 years
from date of original purchase. This warranty only applies to defects resulting from normal use and not from changes caused by
alteration, accident, abuse, fire, flood, environmental hazard, or act of God. Failure is defined as any manufacturing defect that
prevents the gate from operating in a normal manner. This warrantee is valid only if the gate has been installed according to
Stephens Pipe specifications.
Under this warranty, Stephens Pipe & Steel,LLC’s obligation is limited to replacement of defective materials only. Reimbursement
for the cost of removal and/or installation are not included and Stephens Pipe will not provide such service. To file a claim if
defects as listed above become evident in the gate, the original purchaser shall notify Stephens Pipe in writing, along with a copy
of original purchase invoice to : Stephens Pipe & Steel, Inc. P.O. Box 618 Russell Springs, KY 42642. In order to validate this warranty
the information section below must be completed and a copy returned within 30 days of purchase.
Stephens Pipe & Steel. Inc. is not responsible for injury, property damage or other indirect, special or consequential damages arising
directly or indirectly out of the use of these gates, notwithstanding the fact that said injury, property damages or other damages
arose directly or indirectly from an actual or alleged defect in material and/or workmanship.
Any implied warranty, including, but not limited to a warranty of merchantability or of fitness for a particular purpose, shall terminate
at the expiration of this limited 5 year warranty. Some states do not allow limitations on how long an implied warranty lasts, so the
above limitation may not apply to you. Some states do allow the exclusion or limitation of incidental or consequential damages, so
the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other
rights which vary from state to state.
Stephens Pipe & Steel, Inc. Name ___________________________________
P.O. Box 618 / Hwy 619 Address _________________________________ Russell Springs, KY 42642 City, State, Zip ___________________________ Phone (_____) ______-_________Date___-___-___
Stephens Pipe & Steel, LLC
G.A.W. Galvanized Chain Link Fabric
Stephens Pipe & Steel, LLC has been a supplier to the Chain Link fence industry for nearly 30 years. So take our
word for it... pound for pound nothing beats Galvanized After Weaving (GAW) fabric for durability, corrosion
resistance, and value. Stephens Pipe and Steel’s Made in the USA GAW fence fabric provides exceptional
security and protection for any commercial, industrial, and residential project. Manufactured to exacting standards
at our plant in Mount Sterling, Ohio, our chain link fabric meets or exceeds the requirements of ASTM A392-96,
Class 1 and 2, RR-F-191-1D, and the full range of state and federal highway specifications. It fully complies with
the requirements of the domestic content provisions of the Buy America and Buy American Act. Available in a wide
range of heights, gauges, and mesh/selvage options we have the fabric for any industrial, commercial, high
security, or marine application. Specify Stephens Pipe and Steel’s GAW Hot dip Galvanized Chain Link Fabric for
your next project. It’s built to last!
When Zinc is scratched the coating slowly sacrifices itself by galvanic action to protect
the raw steel substrate.
Stephens Pipe & Steel, LLC P.O. Box 618, 2224 East Highway 619 Russell Springs, KY 42642 800 451 2612 270 866 3331 Fax 270 866 4412 [email protected]
• Chain link fence fittings per ASTM F 626. All
ferrous metal fittings are to be galvanized per
the requirements of ASTM F 626.
• Barbed wire supporting arms: Pressed steel
arms with provisions for attaching 3 rows of
barbed wire. Arms shall withstand 250 lb.
(113.5 kg) downward pull at outermost end of
arm without failure.
• Tension and Brace bands are to be pressed
steel.
• Tension (stretcher) bars made of one
continuous piece of steel or aluminum, 3/16" x
3/4" (4.76 mm x 19 mm). Provide one bar per
end or gate post and two bars per corner or
pull post.
• Tie Wire: 9 gauge [0.148" (3.76 mm)]
galvanized steel or aluminum for attachment of
chain link fabric to rails. Hog rings attach fabric
to tension wire to be 12 -1/2 GA [0.0985"
(2.502 mm)].
• Sleeves: Lengths of top rails to be connected
using 6" (152 mm) sleeves that allow for
expansion or contraction of the rail.
• Tension wire: Galvanized steel wire, 7
gauge, [0.177" (4.5 mm)], having a tensile
strength of 75,000 psi (517 MPa).
• Truss rods & lightener: Rod minimum
diameter 5/16" (7.9 mm).
• Fasteners: All nuts and bolts to be
galvanized.
• Barbed wire: Galvanized coated, per ASTM
A-121 Type Z - zinc coated wire - Design
#12-4-5-14R, double strand, 12-1/2 gauge,
twisted line wire with, 4 point barbs, spaced
approximately 5" on center.
• Post caps: Steel, cast iron, or aluminum
alloy. Caps must be weatherproof to prevent
moisture intrusion into post. Top with arm to
be provided when barbed wire is specified.
Intermediate or line post tops to have loop for
top rail when specified.
• Rail ends: Formed steel or iron, designed to
provide secure connection of top rails to
terminal post and brace or other rails to
terminal and intermediate posts.
Galvanized Steel Chain Link Accessories ASTM F626, Federal Specification RR-F-191 /4D, AASHTO M-181-98
June 13, 2007 Ted Eysenbach Stephens Pipe & Steel PO Box 618 Russell Springs, KY 42642 To Whom It May Concern: Thank you for your inquiry concerning the use of recycled steel in Allied Tube products. Allied Tube & Conduit manufactures galvanized steel fence framework. Unlike other materials, steel contains recycled material and is also fully recyclable. In fact, according to the Steel Recycling Institute (SRI), steel is the world’s most recycled material. The amount of recycled material in our steel fence products depends upon the process used by our various steel suppliers. If the pipe is made from a steel coil that comes from a steel mini-mill, then the scrap or recycled content of the steel is between 95-100% because mini-mills use a technology called "electric arc furnace" (EAF) that allows them to use up to 100% scrap. If the pipe is made from a steel coil that comes from an integrated mill, then the scrap or recycled content of the steel is about 30% because integrated mills use a technology called "basic oxygen furnace" (BOF) that restricts the use of scrap steel to no more than 30%. Both the EAF and the BOF methods provide an enhanced environmental benefit. One is not environmentally superior to the other, since they are both complementary parts of the total interlocking infrastructure of steelmaking, product manufacture, scrap generation, and recycling, as explained on the Steel Recycling Institute’s website. You may want to review two articles by the Steel Recycling Institute (www.recycle-steel.org) for further information. The two segments are “Steel Takes LEED with Recycled Content” and “Modern Steel Production Technologies”. If you have additional questions, please let me know. Very truly yours,
Elaine Thompson Director of Industry Affairs Allied Tube & Conduit Phone: 708-225-2069 Fax: 708-225-2066 Email: [email protected]
Tyco Electrical & Metal Products Allied Tube & Conduit Fence Division 16100 S. Lathrop Ave. Harvey, IL 60426
Tele: 708-339-1610 800-882-5543 Fax: 708-339-2373
www.atcfence.com
D O M E S T I C A L L Y M A N U F A C T U R E D
SS 40 ®
Fence Division16100 S. Lathrop Avenue, Harvey, IL 60426 Phone: 800.643.1523 Fax: 870.535.4006
www.atcfence.com [email protected]
Shape O.D. Bundle Qty.
Round 1.315 91
Round 1.660 61
Round 1.900 61
Round 2.375 37
Round 2.875 30
Round 3.500 19
Round 4.000 19
Bundle Counts for SS 40
H i g h S t r e n g t h F e n c e F r a m e w o r kSS 40 ®
A l l i e d S S 4 0 ® v s . S c h e d u l e 4 0
SS 40 ® is available with POLYKOTE color finish: Allied Tube's patented Flo-Coat ® process withpolyester coating conforms to ASTM F 1043 the recommended standards of Section 8, AdditionalCoatings Requirements. Contact your distributor for details.SS 40 ® is available in long and extra long lengths and in cut posts.
Outside Pipe Wall Weight Section Yield Bending BendingDimensions Thickness Modulus Strength Moment Strength
(in.) (in.) (lbs./ft) (inches 3) (psi) (lbs. in.) (lbs.) Posts 6' Cantilever Load
1-7/8" O.D. SS 40 1.900 .120 2.28 0.2810 50,000 14,050 1951-7/8" O.D. Sch 40 1.900 .145 2.72 0.3262 30,000 9,786 136
2-3/8" O.D. SS 40 2.375 .130 3.12 0.4881 50,000 24,405 3392-3/8" O.D. Sch 40 2.375 .154 3.65 0.5606 30,000 16,818 234
2-7/8" O.D SS 40 2.875 .160 4.64 0.8778 50,000 43,890 6102-7/8" O.D. Sch 40 2.875 .203 5.79 1.0640 30,000 31,920 443
3-1/2" O.D. SS 40 3.500 .160 5.71 1.3408 50,000 67,040 9313-1/2" O.D. Sch 40 3.500 .216 7.58 1.7241 30,000 51,723 718
4" O.D. SS 40 4.000 .160 6.56 1.7819 50,000 89,095 12374" O.D. Sch 40 4.000 .226 9.11 2.3940 30,000 71,820 998
Top Rail 10' Supported
1-5/8" O.D. SS 40 1.660 .111 1.84 0.1961 50,000 9,805 3271-5/8" O.D. Sch 40 1.660 .140 2.27 0.2350 30,000 7,050 235
Manufacturing Locations:Harvey, IL / Pine Bluff, AR / Philadelphia, PA / Phoenix, AZ
For information on Razor Ribbon ® brand barbed tape products, please visit www.razorribbon.com
O.D.Allied SS 40 Schedule 40
1200
1000
800
600
400
200
0
Bend
ing
Stre
ngth
(lbs
.)
Line Posts Under 6' Cantilever LoadSTRENGTH COMPARISON
1.900 2.375 2.875 4.000
1400
195136
339234
610
443
1237
998
F O R S E C U R I T Y A N D H I G H S E C U R I T Y A P P L I C A T I O N S
© 2008 Allied Tube & Conduit, /Tyco International, Printed in U.S.A. ATC-L-1627 - 1/08
The logos for ASTM The American Society for Testing Materials, UL The Underwriters Laboratories & AFA The American Fence Association are registered trademarks of the respective companies. The logo for CLFMI The Chain Link Fence Manufacturers Association is a trademark of the CLFMI.
SS 15 TM, SS 20 ®, SS 30 ®, SS 40 ®, Flo-Coat ®, Razor Ribbon ® and Tyco ® are trademarks or registered trademarks of Tyco ® International, Allied Tube & Conduit Corporation and/or its affiliates in the United States and in other countries. All other brand names, product names, or trademarks belong to their respective owners.
Harvey, IL Pine Bluff, AR
Philadelphia, PA
SS 40 FEB 15:SS 40 BRO 2 2/18/08 12:28 PM Page 2
S E C T I O N 3 2 3 1 1 3 ( F o r m e r l y C S I S E C T I O N 0 2 8 2 1 )SS
40®
Allied Tube & Conduit 1.800.643.1523www.alliedtube.com www.atcfence.com
Allied Tube & Conduit, with an engineering
breakthrough in pipe manufacturing andcorrosion resistant coating, has developed themost specified and the most requestedframework in the fencing industry.
SS 40® is manufactured with cold-formedsteel which provides a high yield strength,followed by a uniform triple layer of corrosionprotection. Using Allied’s patented Flo-Coat ®
process consisting of zinc, conversion coatings,and a clear organic top coat applied in-line. SS 40 is 37% stronger and 21% lighter thanSchedule 40 pipe.
The high yield strength steel and the triple coatof locked-in protection, results in pipe that notonly out-performs Schedule 40 pipe in strengthand corrosion resistance, but maintains its lustrousappearance in the most severe atmosphericconditions. SS 40® is clearly the industry leader.
PART 1 - GENERAL1.1 WORK INCLUDED
A. Fence framework, fabric and accessories.B. Gates and related hardware.C. Installation
1.02 SCOPE OF WORKA. Summary: This section covers the work necessary to
complete the chain link fence and gate installation.B. General: Like items of materials provided hereafter shall be
the end-products of one manufacturer in order to achieve standardization for appearance, maintenance, and replacement.
C. Delivery, Storage, and Handling: Deliver material to the site in an undamaged condition. Carefully store material off the ground to provide proper protection against oxidation causedby ground moisture.
1.03 SUBMITTALS AND CERTIFICATIONA. Shop Drawings: Include complete details of fence and gate
construction, fence height, post spacing, dimensions, and unit weights of framework and concrete footing details.
B. Product Data: Provide manufacturer's catalog cuts with printed specifications. Manufacturer shall provide certification of compliance with material specifications. Actual samples of the material may be requested.
PART 2 - PRODUCTS2.01 MATERIAL
A. Framework: SS 40 ® Fence Framework manufactured by Allied Tube & Conduit conforming to Standard Specification ASTM F 1043, Group IC. High-strength steel pipe triple coated per ASTM F 1043: external coating, Type B; internal coating, Type D.
B. Fabric Options: Fabric to be 9-gauge wire, woven in a 2" diamond mesh. Top selvage to be twisted and barbed, bottom selvage to be knuckled unless otherwise specified.
1. Aluminized fabric shall be manufactured in accordance with ASTM A 491 and coated before weaving with a minimum .40 ounces of aluminum persquare foot of surface area. The steel wire and coating shall conform to ASTM A 817.
2. Zinc-coated fabric shall be galvanized before or after weaving in accordance with ASTM A 392, Class 1 or Class 2.
2.02 CONCRETE MIXA. Concrete: Conforming to ASTM C 94, having a minimum
compressive strength of 3,000 PSI at 28 days.2.03 COMPONENTS
A. Rails and Braces: 1-5/8" O.D.B. Gates: Per ASTM F 900C. Fittings, Tie Wires, and Hog Rings: Per ASTM F 626 D. Tension Wire: Per ASTM A 824. (If required)
E. Barbed Wire: If required, commercial quality steel, 12-1/2 gauge, two strand twisted line wire with 4 point barbs at 5" spacing. Coating shall consist of a minimum of 0.80 ouncesof zinc per square foot of wire surface conforming to ASTM A 121 or a minimum of 0.30 ounces of aluminum per squarefoot of wire surface conforming to ASTM A 585.
F. Barbed Tape: If required, options are available in ASTM F 1910 Table 1 and 2.
PART 3 - EXECUTION3.01 INSTALLATION
A. General: Installation to conform to ASTM F 567.B. Height: Provide height as indicated on contract drawings.C. Post Spacing: Space line posts at intervals not exceeding
ten feet.D. Post Setting: Set terminal, gate and line posts plumb in
concrete footings. Top of footing to be 2" above grade and sloped to direct water away from posts.
E. Bracing: Brace Gate and terminal posts back to adjacent line posts with horizontal brace rails and diagonal truss rods.
F. Top Rail: Install through line loop caps connecting sections with sleeves to form a continuous rail between terminal posts.
G. Bottom / Middle Rail: Install between posts with line rail clamps or rail ends and bands.
H. Fabric: Pull fabric taut with bottom selvage 2" above grade. Fasten to terminal posts with tension bars threaded through mesh and secured with tension bands at maximum 15" intervals. Tie to line posts and top rails with tie wires spacedat maximum 12" on posts and 24" on rails. Attach to bottom/top tension wire with hog rings at maximum 24" intervals.
I. Barbed Wire: Anchor to terminal extension arms, pull taut, and firmly install in slots of line post extension arms.
J. Gates: Install gates plumb, level and secure for full opening without interference. Anchor center stops and keepers in concrete.
K. Fasteners: Install nuts for fittings, bands, and hardware bolts on inside of fence.
L. Barbed Tape: Install in accordance with ASTM F 1911. Consult with manufacturer for unique applications.
3.02 COMPLETIONA. The area of installation shall be left free of debris caused
by the installation of the fence End of Section.
Allied Tube & Conduit Corporation makes no warranties expressed orimplied including warranty of merchantability or fitness for a particularpurpose. The specifications, descriptions, information and illustratedmaterials herein are submitted solely for evaluation by others and since theuse of its information is not within it's control, Allied Tube & ConduitCorporation assumes no obligation or liability for such information and doesnot guarantee results from the use of said products or the informationherein. Reference should be made to the original or primary source dataalong with standard accepted industry practice. The material herein is as ofthe date of publication and is subject to change without notice. Forcertification see contact information. © Allied Tube & Conduit Corporation
Security and High Security Applications for CHAIN-LINK FENCES AND GATES
Certification"Made in U.S.A." is proudly displayed on every length of SS 40 ® pipe. Allied will certify that all SS 40 fence pipe ismanufactured in the USA and is in compliance withapplicable Federal, State and local specifications.
Specifying AgenciesPartial list of agencies which have approved SS 40®.� (AASHTO) American Associations of State Highway and
Transportation Officials M181-93� Federal Specifications RR-F-191/2E (Chain Link Fence
Gates)� Federal Specifications RR-F-191/3E (Chain Link Fence
Posts, Top Rails and Braces)� Unified Facilities Guide Specification (Department of
Defense)� Department of Transportation Federal Aviation
Administration AC 150/5370-10A Item F-162� U.S. Department of Justice - Federal Bureau of Prisons� ASTM Specification F1043-06 Standard Specification for
Strength and Protective Coatings
Steel CoilClean Steel
Strip
Pipe RollFormed
HighFrequencyWelding
90% ZincInterior Coating
Applied
Cleaning HeatingHot-DippedZinc Coating
Quench Bath ConversionCoating Clear Organic
Topcoat
Curing Cut to LengthAutomating Packaging System
Sizing Section
FLO-COAT ® Process
Clear Organic Coating
Conversion Coating
UniformHot-Dipped
Galvanized AfterFabrication90% Zinc
Interior Coating
Cold-Formed SteelProviding
High Yield / HighTensile Strength
Flo-Coat ® Process
SS 40 FEB 15:SS 40 BRO 2 2/18/08 12:28 PM Page 1
S E C T I O N 3 2 3 1 1 3 ( F o r m e r l y C S I S E C T I O N 0 2 8 2 1 )
SS 4
0®
Allied Tube & Conduit 1.800.643.1523www.alliedtube.com www.atcfence.com
Allied Tube & Conduit, with an engineering
breakthrough in pipe manufacturing andcorrosion resistant coating, has developed themost specified and the most requestedframework in the fencing industry.
SS 40® is manufactured with cold-formedsteel which provides a high yield strength,followed by a uniform triple layer of corrosionprotection. Using Allied’s patented Flo-Coat ®
process consisting of zinc, conversion coatings,and a clear organic top coat applied in-line. SS 40 is 37% stronger and 21% lighter thanSchedule 40 pipe.
The high yield strength steel and the triple coatof locked-in protection, results in pipe that notonly out-performs Schedule 40 pipe in strengthand corrosion resistance, but maintains its lustrousappearance in the most severe atmosphericconditions. SS 40® is clearly the industry leader.
PART 1 - GENERAL1.1 WORK INCLUDED
A. Fence framework, fabric and accessories.B. Gates and related hardware.C. Installation
1.02 SCOPE OF WORKA. Summary: This section covers the work necessary to
complete the chain link fence and gate installation.B. General: Like items of materials provided hereafter shall be
the end-products of one manufacturer in order to achieve standardization for appearance, maintenance, and replacement.
C. Delivery, Storage, and Handling: Deliver material to the site in an undamaged condition. Carefully store material off the ground to provide proper protection against oxidation causedby ground moisture.
1.03 SUBMITTALS AND CERTIFICATIONA. Shop Drawings: Include complete details of fence and gate
construction, fence height, post spacing, dimensions, and unit weights of framework and concrete footing details.
B. Product Data: Provide manufacturer's catalog cuts with printed specifications. Manufacturer shall provide certification of compliance with material specifications. Actual samples of the material may be requested.
PART 2 - PRODUCTS2.01 MATERIAL
A. Framework: SS 40 ® Fence Framework manufactured by Allied Tube & Conduit conforming to Standard Specification ASTM F 1043, Group IC. High-strength steel pipe triple coated per ASTM F 1043: external coating, Type B; internal coating, Type D.
B. Fabric Options: Fabric to be 9-gauge wire, woven in a 2" diamond mesh. Top selvage to be twisted and barbed, bottom selvage to be knuckled unless otherwise specified.
1. Aluminized fabric shall be manufactured in accordance with ASTM A 491 and coated before weaving with a minimum .40 ounces of aluminum persquare foot of surface area. The steel wire and coating shall conform to ASTM A 817.
2. Zinc-coated fabric shall be galvanized before or after weaving in accordance with ASTM A 392, Class 1 or Class 2.
2.02 CONCRETE MIXA. Concrete: Conforming to ASTM C 94, having a minimum
compressive strength of 3,000 PSI at 28 days.2.03 COMPONENTS
A. Rails and Braces: 1-5/8" O.D.B. Gates: Per ASTM F 900C. Fittings, Tie Wires, and Hog Rings: Per ASTM F 626 D. Tension Wire: Per ASTM A 824. (If required)
E. Barbed Wire: If required, commercial quality steel, 12-1/2 gauge, two strand twisted line wire with 4 point barbs at 5" spacing. Coating shall consist of a minimum of 0.80 ouncesof zinc per square foot of wire surface conforming to ASTM A 121 or a minimum of 0.30 ounces of aluminum per squarefoot of wire surface conforming to ASTM A 585.
F. Barbed Tape: If required, options are available in ASTM F 1910 Table 1 and 2.
PART 3 - EXECUTION3.01 INSTALLATION
A. General: Installation to conform to ASTM F 567.B. Height: Provide height as indicated on contract drawings.C. Post Spacing: Space line posts at intervals not exceeding
ten feet.D. Post Setting: Set terminal, gate and line posts plumb in
concrete footings. Top of footing to be 2" above grade and sloped to direct water away from posts.
E. Bracing: Brace Gate and terminal posts back to adjacent line posts with horizontal brace rails and diagonal truss rods.
F. Top Rail: Install through line loop caps connecting sections with sleeves to form a continuous rail between terminal posts.
G. Bottom / Middle Rail: Install between posts with line rail clamps or rail ends and bands.
H. Fabric: Pull fabric taut with bottom selvage 2" above grade. Fasten to terminal posts with tension bars threaded through mesh and secured with tension bands at maximum 15" intervals. Tie to line posts and top rails with tie wires spacedat maximum 12" on posts and 24" on rails. Attach to bottom/top tension wire with hog rings at maximum 24" intervals.
I. Barbed Wire: Anchor to terminal extension arms, pull taut, and firmly install in slots of line post extension arms.
J. Gates: Install gates plumb, level and secure for full opening without interference. Anchor center stops and keepers in concrete.
K. Fasteners: Install nuts for fittings, bands, and hardware bolts on inside of fence.
L. Barbed Tape: Install in accordance with ASTM F 1911. Consult with manufacturer for unique applications.
3.02 COMPLETIONA. The area of installation shall be left free of debris caused
by the installation of the fence End of Section.
Allied Tube & Conduit Corporation makes no warranties expressed orimplied including warranty of merchantability or fitness for a particularpurpose. The specifications, descriptions, information and illustratedmaterials herein are submitted solely for evaluation by others and since theuse of its information is not within it's control, Allied Tube & ConduitCorporation assumes no obligation or liability for such information and doesnot guarantee results from the use of said products or the informationherein. Reference should be made to the original or primary source dataalong with standard accepted industry practice. The material herein is as ofthe date of publication and is subject to change without notice. Forcertification see contact information. © Allied Tube & Conduit Corporation
Security and High Security Applications for CHAIN-LINK FENCES AND GATES
Certification"Made in U.S.A." is proudly displayed on every length of SS 40 ® pipe. Allied will certify that all SS 40 fence pipe ismanufactured in the USA and is in compliance withapplicable Federal, State and local specifications.
Specifying AgenciesPartial list of agencies which have approved SS 40®.� (AASHTO) American Associations of State Highway and
Transportation Officials M181-93� Federal Specifications RR-F-191/2E (Chain Link Fence
Gates)� Federal Specifications RR-F-191/3E (Chain Link Fence
Posts, Top Rails and Braces)� Unified Facilities Guide Specification (Department of
Defense)� Department of Transportation Federal Aviation
Administration AC 150/5370-10A Item F-162� U.S. Department of Justice - Federal Bureau of Prisons� ASTM Specification F1043-06 Standard Specification for
Strength and Protective Coatings
Steel CoilClean Steel
Strip
Pipe RollFormed
HighFrequencyWelding
90% ZincInterior Coating
Applied
Cleaning HeatingHot-DippedZinc Coating
Quench Bath ConversionCoating Clear Organic
Topcoat
Curing Cut to LengthAutomating Packaging System
Sizing Section
FLO-COAT ® Process
Clear Organic Coating
Conversion Coating
UniformHot-Dipped
Galvanized AfterFabrication90% Zinc
Interior Coating
Cold-Formed SteelProviding
High Yield / HighTensile Strength
Flo-Coat ® Process
SS 40 FEB 15:SS 40 BRO 2 2/18/08 12:28 PM Page 1
D O M E S T I C A L L Y M A N U F A C T U R E D
SS 40 ®
Fence Division16100 S. Lathrop Avenue, Harvey, IL 60426 Phone: 800.643.1523 Fax: 870.535.4006
www.atcfence.com [email protected]
Shape O.D. Bundle Qty.
Round 1.315 91
Round 1.660 61
Round 1.900 61
Round 2.375 37
Round 2.875 30
Round 3.500 19
Round 4.000 19
Bundle Counts for SS 40
H i g h S t r e n g t h F e n c e F r a m e w o r kSS 40 ®
A l l i e d S S 4 0 ® v s . S c h e d u l e 4 0
SS 40 ® is available with POLYKOTE color finish: Allied Tube's patented Flo-Coat ® process withpolyester coating conforms to ASTM F 1043 the recommended standards of Section 8, AdditionalCoatings Requirements. Contact your distributor for details.SS 40 ® is available in long and extra long lengths and in cut posts.
Outside Pipe Wall Weight Section Yield Bending BendingDimensions Thickness Modulus Strength Moment Strength
(in.) (in.) (lbs./ft) (inches 3) (psi) (lbs. in.) (lbs.) Posts 6' Cantilever Load
1-7/8" O.D. SS 40 1.900 .120 2.28 0.2810 50,000 14,050 1951-7/8" O.D. Sch 40 1.900 .145 2.72 0.3262 30,000 9,786 136
2-3/8" O.D. SS 40 2.375 .130 3.12 0.4881 50,000 24,405 3392-3/8" O.D. Sch 40 2.375 .154 3.65 0.5606 30,000 16,818 234
2-7/8" O.D SS 40 2.875 .160 4.64 0.8778 50,000 43,890 6102-7/8" O.D. Sch 40 2.875 .203 5.79 1.0640 30,000 31,920 443
3-1/2" O.D. SS 40 3.500 .160 5.71 1.3408 50,000 67,040 9313-1/2" O.D. Sch 40 3.500 .216 7.58 1.7241 30,000 51,723 718
4" O.D. SS 40 4.000 .160 6.56 1.7819 50,000 89,095 12374" O.D. Sch 40 4.000 .226 9.11 2.3940 30,000 71,820 998
Top Rail 10' Supported
1-5/8" O.D. SS 40 1.660 .111 1.84 0.1961 50,000 9,805 3271-5/8" O.D. Sch 40 1.660 .140 2.27 0.2350 30,000 7,050 235
Manufacturing Locations:Harvey, IL / Pine Bluff, AR / Philadelphia, PA / Phoenix, AZ
For information on Razor Ribbon ® brand barbed tape products, please visit www.razorribbon.com
O.D.Allied SS 40 Schedule 40
1200
1000
800
600
400
200
0
Bend
ing
Stre
ngth
(lbs
.)
Line Posts Under 6' Cantilever LoadSTRENGTH COMPARISON
1.900 2.375 2.875 4.000
1400
195136
339234
610
443
1237
998
F O R S E C U R I T Y A N D H I G H S E C U R I T Y A P P L I C A T I O N S
© 2008 Allied Tube & Conduit, /Tyco International, Printed in U.S.A. ATC-L-1627 - 1/08
The logos for ASTM The American Society for Testing Materials, UL The Underwriters Laboratories & AFA The American Fence Association are registered trademarks of the respective companies. The logo for CLFMI The Chain Link Fence Manufacturers Association is a trademark of the CLFMI.
SS 15 TM, SS 20 ®, SS 30 ®, SS 40 ®, Flo-Coat ®, Razor Ribbon ® and Tyco ® are trademarks or registered trademarks of Tyco ® International, Allied Tube & Conduit Corporation and/or its affiliates in the United States and in other countries. All other brand names, product names, or trademarks belong to their respective owners.
Harvey, IL Pine Bluff, AR
Philadelphia, PA
SS 40 FEB 15:SS 40 BRO 2 2/18/08 12:28 PM Page 2
