SPRING INTO SUMMER … · SPRING INTO SUMMER WITH RED HOT PRICES SIS_2020_16ppA4_Retail_v2.indd 1 27/8/20 8:02 am

SPRINGINTOSUMMER WITH RED HOT PRICES

SIS_2020_16ppA4_Retail_v2.indd 1SIS_2020_16ppA4_Retail_v2.indd 1 27/8/20 8:02 am27/8/20 8:02 am

METRIC HSS BRIGHT FINISH LIST PRICE SPECIAL2007-M2 1.0-10.0MM X 0.5MM $205.82 $76.95 2007-M3 1.0-13.0MM X 0.5MM $405.02 $154.952007-M5 1.0-6.5MM X 0.5MM, 7.0-13.0MM X 1.0MM $266.56 $99.95

FRACTIONAL HSS BRIGHT FINISH LIST PRICE SPECIAL2006-F2 1/16-3/8" X 1/64" $210.32 $79.952006-F3 1/16-1/2" X 1/64" $449.53 $169.952006-F5 1/16-1/4" X 1/64", 9/32-1/2" X 1/32" $309.85 $119.95

METRIC HSS BLACK FINISH LIST PRICE SPECIAL2003-M2 1.0-10.0MM X 0.5MM $205.82 $76.95 2003-M3 1.0-13.0MM X 0.5MM $405.02 $154.95

FRACTIONAL HSS BLACK FINISH LIST PRICE SPECIAL2000-F2 1/16-3/8" X 1/64" $210.32 $79.952000-F3 1/16-1/2" X 1/64" $449.53 $169.95

METRIC HSS-Co5 BRONZE FINISH LIST PRICE SPECIAL2011-M2 1.0-10.0MM X 0.5MM $479.40 $169.95 2011-M3 1.0-13.0MM X 0.5MM $944.88 $359.952011-M5 1.0-6.5MM X 0.5MM, 7.0-13.0MM X 1.0MM $633.09 $254.95

FRACTIONAL HSS-Co5 BRONZE FINISH2010-F2 1/16-3/8" X 1/64" $507.25 $179.95 2010-F3 1/16-1/2" X 1/64" $1100.94 $394.952010-F5 1/16-1/4" X 1/64", 9/32-1/2" X 1/32" $723.12 $289.95

DELTA POINT METRIC HSS BRIGHT FINISH LIST PRICE SPECIAL2015-M2 1.0-10.0MM X 0.5MM $205.82 $99.952015-M3 1.0-13.0MM X 0.5MM $405.02 $189.952015-M5 1.0-6.5MM X 0.5MM, 7.0-13.0MM X 1.0MM $266.56 $129.95

HSS-M2 118º SPLIT POINTSplit point is self centering and reduces the need for end thrust. Friction at workpiece is reduced. 118º point angles are ideal for use in materials such as mild steel and cast iron. The 118º point creates easily controlled chips which are wide and thin. Bright finish tools have no surface treatment and are supplied in the as-ground condition. These tools are suitable for general purpose use, particularly for non-ferrous applications.

HSS-M2 118º SPLIT POINTSplit point is self centering and reduces the need for end thrust. Friction at workpiece is reduced. 118º point angles are ideal for use in materials such as mild steel and cast iron. The 118º point creates easily controlled chips which are wide and thin. Black finish tools are generally recommended for ferrous applications where the oxide layer aids chip flow and heat dissipation.

HSS-M2 DELTA POINT ~ DRILLS FASTER, LASTS LONGERThe Delta Point drill bit is completely unlike traditional chisel point and split point drill bits. Delta Point drills have a multi-faceted cutting tip. The overall length of the cutting edge of Delta Point significantly exceeds that of conventional split point drills of comparable size. Although the final design might look complicated the results are simply extraordinary.

HSS-Co5 (COBALT) 135º SPLIT POINTThe 135º point provides superior performance in harder steel materials especially in deep hole applications. In these situations it will produce thicker chips minimising work hardening of the cavity. Faster penetration reduces abrasion and friction along the cutting edges. Cobalt HSS drills are extremely hard and provide superior performance and increased tool life especially in stainless steel and high tensile steel.

BLACK KNIGHT

QUICKSILVER

®

®

COBALTTOUGH

BLACK KNIGHT

QUICKSILVER

®

®

COBALTTOUGH

BLACK KNIGHT

QUICKSILVER

®

®

COBALTTOUGH

BLACK KNIGHT

QUICKSILVER

®

®

COBALTTOUGH

METRIC REDUCED SHANK DRILL SET


BORDO METRIC DRILL ASSORTMENTPART# 2007-MA1

SPECIAL $289.95

BORDO METRIC DRILL ASSORTMENT - 111 PIECES1.0 to 4.0 x 0.5mm – 10 each, 4.5 to 6.5 x 0.5mm – 5 each, 8.0 & 10.0 – 5 each, #30 double ended panel drills – 5 each. Bonus 60ml cutting fluid.

HSS REFILL SETS LIST PRICE SPECIAL2007-M1S 1.0-6.5MM X 0.5MM $63.52 $28.50 2006-F1S 1/16-1/4" X 1/64" $67.50 $28.50

HSS-Co5 (COBALT) REFILL SETS LIST PRICE SPECIAL2011-M1S 1.0-6.5MM X 0.5MM $160.11 $57.952010-F1S 1/16-1/4” X 1/64” $155.53 $57.95

BLACK KNIGHT

QUICKSILVER

®

®

COBALTTOUGH

METRIC REDUCED SHANK DRILL SETPART# 2654-S1

SPECIAL $185.95

METRIC REDUCED SHANK DRILL SETPART# 2654-S2

SPECIAL $382.95

FRACTIONAL REDUCED SHANK DRILL SETPART# 2651-S1

SPECIAL $185.95

FRACTIONAL REDUCED SHANK DRILL SETPART# 2651-S2

SPECIAL $382.95

REDUCED SHANK DRILL SETS METRIC LIST PRICE SPECIAL2654-S1 4 PCE – 16, 18, 22, 25MM $459.23 $185.95 2654-S2 8 PCE – 14, 15, 16, 16.5, 18, 20, 22, 25MM $1003.38 $382.95

REDUCED SHANK DRILL SETS FRACTIONAL LIST PRICE SPECIAL2651-S1 4 PCE – 5/8", 3/4", 7/8", 1" $459.23 $185.95 2651-S2 8 PCE – 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1" $1003.38 $382.95

HEX SHANK TCT TILE SETPART# 2750-S1

SPECIAL $94.95

HEX SHANK MASONRY SETPART# 2534-S1

SPECIAL $38.95

UNIVERSAL DRILL SETPART# 2700-S1

SPECIAL $31.95

TCT CERAMIC TILE SETPART# 2710-S1

SPECIAL $121.95


SCREWDRIVER BITS, NUTSETTERS AND ACCESSORIES LIST PRICE SPECIAL5400-S2 11 PIECE SCREWDRIVER BIT POUCH WITH HEAVY DUTY HANDLE $137.79 $68.95 5300-S1 31 PIECE SCREWDRIVER INSERT BIT SET $76.44 $38.95 5400-S1 34 PIECE SCREWDRIVER POWER BIT SET $90.21 $42.45 5400-PH2GX50T POWER BIT PH2 GRIPPA 50MM 10 PACK $19.90 $10.455400-PH2GX100T POWER BIT PH2 GRIPPA 100MM 10 PACK $45.46 $21.95 5360-AD 90 DEGREE ANGLE DRIVER FOR 1/4" INSERT BITS $120.62 $65.45

SCREWDRIVER BIT SETS LIST PRICE SPECIAL5400-S3 41 PCE STD SCREWDRIVER INSERT BIT, POWER BIT & NUTSETTER SET WITH SWIVEL HEAD BIT HOLDER & MAGNETIC SLEEVE INSERT BIT HOLDER $137.83 $71.95 5400-S4 59 PCE STANDARD SCREWDRIVER INSERT BIT, POWER BIT AND NUTSETTER SET WITH MAGNETIC SLEEVE INSERT BIT HOLDER $324.45 $71.95 5405-S1 32 PCE IMPACT SCREWDRIVER INSERT BIT, POWER BIT AND NUTSETTER SET WITH MP-QR+ INSERT BIT HOLDER $225.48 $75.95 2206-S1 32 PCE IMPACT SCREWDRIVER INSERT BIT, POWER BIT, NUTSETTER, MP-QR+ HOLDER, MAG SLEEVE HOLDER, 2.0-8.0MM HSS HEX SHANK DRILLS $242.72 $121.95 2206-S2 23 PCE IMPACT SCREWDRIVER POWER BIT AND 2.0-13.0MM HSS HEX SHANK TWIST DRILL SET $239.80 $121.95

SCREWDRIVER BIT SETPART# 5400-S3

SPECIAL $71.95

IMPACT SCREWDRIVER BIT SETPART# 5405-S1

SPECIAL $75.95

SCREWDRIVER BIT SETPART# 5400-S4

SPECIAL $71.95

IMPACT SCREWDRIVER AND DRILL BIT SET

PART# 2206-S1SPECIAL $121.95

IMPACT SCREWDRIVER AND DRILL BIT SET


IMPACT BITS – TRADE PACKS LIST PRICE SPECIAL5305-PH2X25TP IMPACT TRADE PACK PH2 25MM – 25 PIECES $50.94 $26.45 WITH BONUS INSERT BIT HOLDER 5405-PH2X50TP IMPACT TRADE PACK PH2 50MM – 25 PIECES $72.68 $42.455605-NS5/16X65TP IMPACT TRADE PACK NUTSETTER 5/16 X 65MM – 5 PIECES $63.86 $39.95

IMPACT BITSBordo Impact Bits are designed and manufactured for optimum performance in modern impact drivers. Not only do they offer significantly increased bit life in impact applications but they also offer exceptional performance in standard driving usage.

COMFORT GRIP UTILITY KNIFEGREEN

ELECTRICIAN’S SCISSOR AND CABLE STRIPPER KIT

PART#


MULTI FUNCTIONINDUSTRIAL SNIPS

230MM STAINLESS STEEL

200MM HIGH TENSILE

STAINLESS STEEL

BONUSIMPACT RESISTANT

SAFETY HOLSTER WITH INTEGRATED BLADE

GUARD AND BELT CLIP WITH EVERY PAIR

200MM STAINLESS STEEL

PART# 1003-MF200PRICE $23.50

PART# 1003-MF200HTPRICE $36.00

PART# 1003-MF230PRICE $28.50

PREMIUMQUALITYULTRASHARPBLADES

MAVERICKTOOLS.COM.AU

BLADESBLADES

WARNINGULTRA SHARPBLADES ARE

RIDICULOUSLYSHARP

10x

BLADES

9 326518 169154

MVRK ULTRA SHARPTRAPEZOIDAL AND SNAP BLADES Precision ground premium qualitydouble honed SK2H carbon tool steel.

ULTRA SHARP WITHLONGER EDGE HOLDING.

Part No.1011-US10

MVRK CUTTING TOOLS ARE DESIGNED FOR MAXIMUM DURABILITY AND OPTIMUM PERFORMANCE.WE GUARANTEE IT!

MVRK ULTRA SHARP BLADES

HANDLE NEW AND USED BLADES CAREFULLY AND ALWAYS WEAREYE PROTECTION. KEEP OUT OFREACH OF CHILDREN.

MADE IN CHINA TO THE STRICT SPECIFICATIONS OF BORDO INTERNATIONAL – A 100% AUSTRALIAN OWNED FAMILY COMPANY

PREMIUMQUALITYSK5BLADES


WARNINGBLADES AREEXTREMELY

SHARP

10x

BLADES

BLADES9 326518 126966

Part No.1011-T10


MVRK PREMIUM SK5 BLADES

HANDLE NEW AND USED BLADES CAREFULLY AND ALWAYS WEAREYE PROTECTION. KEEP OUT OFREACH OF CHILDREN.


MVRK PREMIUM SK5 TRAPEZOIDAL ANDSNAP BLADESPrecision ground premium quality SK5 carbon steel blades hold a very sharp edge with high abrasion resistance.

HIGH PERFORMANCE STEEL BLADES.

CAUTIONSHARP BLADES

10PREMIUMQUALITY

HEAVY DUTYTRAPEZOIDALSK5 BLADES

PREMIUMQUALITYSK5BLADES


WARNINGBLADES AREEXTREMELY

SHARP

BLADES 9 326518 126447 Part No. 1011-T100

MVRK CUTTING TOOLS ARE DESIGNED FOR MAXIMUM DURABILITY AND OPTIMUM PERFORMANCE. WE GUARANTEE IT!

MVRK PREMIUM SK5 BLADES

HANDLE NEW AND USED BLADES CAREFULLY AND ALWAYS WEAREYE PROTECTION. KEEP OUT OF REACH OF CHILDREN.

MVRK PREMIUM SK5TRAPEZOIDAL AND SNAP BLADESPrecision ground premium quality SK5 carbon steel blades hold a very sharp edge with high abrasion resistance.

HIGH PERFORMANCE STEEL BLADES.

MADE IN CHINA TO THESTRICT SPECIFICATIONSOF BORDO INTERNATIONAL– A 100% AUSTRALIANOWNED FAMILY COMPANY

MVRK ULTRA SHARPTRAPEZOIDAL AND SNAP BLADES Precision ground premium quality double honed SK2H carbon tool steel.


ALSO AVAILABLE IN THE MVRK PREMIUM BLADE RANGE

9 326518 169178

MVRK ULTRA SHARPSNAP BLADES AND TRAPEZOIDAL BLADESPrecision ground premium qualitydouble honed SK2H carbon tool steel.


Part No.1016-18US10



HANDLE NEW AND USED BLADES CAREFULLY AND ALWAYS WEAR EYE PROTECTION. KEEP OUT OF REACH OF CHILDREN.


18MMULTRA SHARPSNAP BLADES

X10

BLADESBLADES

WARNINGULTRA SHARP BLADES ARE

RIDICULOUSLY SHARP


10BLADES

18MM

X 0.5MM8 POINTS

WA

RN

ING

BLA

DE

S A

RE

RID

ICU

LO

USLY

SH

AR

P


KEEP OUT OF REACH OF CHILDREN

Part No. 1016-18US10

25MMULTRA SHARPSNAP BLADES

X10

BLADESBLADES


RIDICULOUSLY SHARP


10BLADES

25MM

X 0.7MM7 POINTS


WA

RN

ING

BLA

DE

S A

RE

RID

ICU

LO

USLY

SH

AR

P


Part No. 1016-25US10

9MMULTRASHARPSNAPBLADES

X10

BLADESBLADES


RIDICULOUSLY SHARP


9 326518 1 6 9 1 6 1

MVRK ULTRA SHARPSNAP BLADES AND TRAPEZOIDAL BLADESPrecision ground premium qualitydouble honed SK2H carbon tool steel.


Part No.1016-9US10



HANDLE NEW AND USED BLADES CAREFULLY AND ALWAYS WEAR EYE PROTECTION. KEEP OUT OF REACH OF CHILDREN.


10BLADES

9MM

X 0.4MM13 POINTS

WA

RN

ING

BLA

DE

S A

RE

RID

ICU

LO

USY

SH

AR

P



Part No. 1016-9US10

MVRK SNAP BLADE KNIVES LIST PRICE SPECIAL1015-18SKBM ECONOLINE 18MM SNAP BLADE KNIFE $2.41 $1.60 1015-9PSK36 ULTRA SHARP 9MM SNAP BLADE KNIFE – SERIOUSLY SHARP! $2.89 $2.20 MVRK TRAPEZOIDAL BLADES 1011-T10 SK5 TRAPEZOIDAL BLADES 10 PACK $8.04 $5.30 1011-T100 SK5 TRAPEZOIDAL BLADES 100 PACK SAFETY DISPENSER $59.27 $31.00 1011-US10 ULTRA SHARP TRAPEZOIDAL BLADES 10 PACK SAFETY DISPENSER $10.41 $6.40 1011-US100 ULTRA SHARP TRAPEZOIDAL BLADES 100 PACK SAFETY DISPENSER $101.41 $55.00 MVRK SNAP BLADES1016-18SB50 SK5 18MM SNAP BLADES 50 PACK $28.26 $17.001016-9US10 ULTRA SHARP 9MM SNAP BLADES 10 PACK $8.75 $5.30 1016-18US10 ULTRA SHARP 18MM SNAP BLADES 10 PACK $11.14 $7.50 1016-25US10 ULTRA SHARP 25MM SNAP BLADES 10 PACK $23.06 $15.00 1016-18US50 ULTRA SHARP 18MM SNAP BLADES 50 PACK $54.86 $30.00

MVRK SCISSORS LIST PRICE SPECIAL1000-SC154 MVRK 154MM SCISSORS $32.69 $18.50 1000-SC178 MVRK 178MM SCISSORS $36.31 $21.00 1000-SC210 MVRK 210MM SHEARS $51.78 $32.00 1000-SC232 MVRK 232MM SHEARS $60.16 $37.00 1000-SC254 MVRK 254MM SHEARS $67.23 $41.50 1000-SC150MPE MVRK 150MM MULTI-PURPOSE ELECTRICIAN’S SCISSORS $54.24 $37.00 1000-SC206MF MVRK 206MM MULTI-FUNCTION SCISSORS $53.45 $34.00 1000-SC150MPES1 MVRK ELECTRICIAN’S SCISSORS & CABLE STRIPPER KIT $112.37 $65.50

INDUSTRY LEADING PREMIUM QUALITY STAINLESS STEEL MICRO SERRATED BLADES.PRECISION GROUND AND HONED.OPTIMISED GEOMETRY TO CUT PAPER AND CARD, KEVLAR, CARBON AND GLASS CLOTH, FABRIC, LEATHER, CARPET, LINOLEUM, WIRE, CABLE, THIN SHEET METALS, RUBBER, STRAPPING, SARKING, LIGHTWEIGHT MESH, PLASTIC SHEET, FLASHING AND OTHER TOUGH MATERIALS.AMBIDEXTROUS WITH DUAL SIDED, QUICK RELEASE THUMB LOCK.DURABLE SOFT GRIP CHEMICAL RESISTANT HANDLES.

THESE SNIPS DO IT ALL!

KNIVES, BLADES AND SCISSORS

COMFORT GRIP UTILITY KNIFEGREEN PART# 1010-UN24G

SPECIAL $9.50

ELECTRICIAN’S SCISSOR AND CABLE STRIPPER KIT

PART# 1000-SC150MPES1SPECIAL $65.50

MULTI-FUNCTION SCISSORS

PART# 1000-SC206MFSPECIAL $34.00

MULTI-PURPOSE ELECTRICIAN’S SCISSORS PART# 1000-SC150MPE

SPECIAL $37.00

COMFORT GRIP UTILITY KNIFEYELLOW PART# 1010-UN24Y

SPECIAL $9.50

COMFORT GRIP UTILITY KNIFEORANGE PART# 1010-UN24O

SPECIAL $9.50

PREMIUM QUALITY STAINLESS STEEL SCISSORS AND SHEARS


THREAD FORM

# OF TAPS

TAPLEAD/S

TAPMATERIAL TAPS INCLUDED DRILLS INCLUDED $

LIST$

SPECIALPART

NUMBER

METRIC 7 S/POINT HSS-Co5 M3, M4, M5, M6, M8, M10, M12 – $256.09 $148.95 ETM312SPUNC 7 S/POINT HSS-Co5 6-32, 8-32, 10-24, 1/4, 5/16, 3/8, 1/2 – $261.91 $148.45 ETC312SPUNF 7 S/POINT HSS-Co5 6-40, 8-36, 10-32, 1/4, 5/16, 3/8, 1/2 – $277.62 $158.95 ETF612SPBSW 7 S/POINT HSS-Co5 1/8, 5/32, 3/16,1/4, 5/16, 3/8, 1/2 – $308.55 $179.95 ETW1812SP

METRIC 7 S/POINT HSS-Co5 M3, M4, M5, M6, M8, M10, M12 2.5, 3.3, 4.2, 5, 6.8, 8.5, 10.2 $320.69 $179.95 EMDSX10SPUNC 7 S/POINT HSS-Co5 6-32, 8-32, 10-24, 1/4, 5/16, 3/8, 1/2 2.9, 3.5, 3.9, 5.1, 6.6, 8, 10.8 $338.50 $190.95 ECDSX10SPUNF 7 S/POINT HSS-Co5 6-40, 8-36, 10-32, 1/4, 5/16, 3/8, 1/2 3, 3.5, 4.1, 5.5, 6.9, 8.5, 11.5 $349.56 $190.45 EFDSX10SPBSW 7 S/POINT HSS-Co5 1/8, 5/32, 3/16,1/4, 5/16, 3/8, 1/2 2.6, 3.2, 3.7, 5.1, 6.5, 7.9, 10.5 $370.04 $199.95 EWDSX10SP

THREAD FORM

# OF TAPS

TAPLEAD/S


LIST$

SPECIALPART

NUMBER

METRIC 7 S/FLUTE HSS-Co5 M3, M4, M5, M6, M8, M10, M12 – $325.64 $185.45 ETM312SFUNC 7 S/FLUTE HSS-Co5 6-32, 8-32, 10-24, 1/4, 5/16, 3/8, 1/2 – $330.63 $179.95 ETC612SFUNF 7 S/FLUTE HSS-Co5 6-40, 8-36, 10-32, 1/4, 5/16, 3/8, 1/2 – $332.54 $190.95 ETF612SFBSW 7 S/FLUTE HSS-Co5 1/8, 5/32, 3/16,1/4, 5/16, 3/8, 1/2 – $366.39 $199.95 ETW1812SF

METRIC 7 S/FLUTE HSS-Co5 M3, M4, M5, M6, M8, M10, M12 2.5, 3.3, 4.2, 5, 6.8, 8.5, 10.2 $391.24 $211.95 EMDSX10SFUNC 7 S/FLUTE HSS-Co5 6-32, 8-32, 10-24, 1/4, 5/16, 3/8, 1/2 2.9, 3.5, 3.9, 5.1, 6.6, 8, 10.8 $407.23 $222.45 ECDSX10SFUNF 7 S/FLUTE HSS-Co5 6-40, 8-36, 10-32, 1/4, 5/16, 3/8, 1/2 3, 3.5, 4.1, 5.5, 6.9, 8.5, 11.5 $404.48 $221.95 EFDSX10SFBSW 7 S/FLUTE HSS-Co5 1/8, 5/32, 3/16,1/4, 5/16, 3/8, 1/2 2.6, 3.2, 3.7, 5.1, 6.5, 7.9, 10.5 $429.89 $232.95 EWDSX10SF

HAND TAP / MACHINE TAP / TAP & DRILL SETSTHREAD FORM

# OF TAPS

TAPLEAD/S


LIST$

SPECIALPART

NUMBER

METRIC 7 INTER HSS M3, M4, M5, M6, M8, M10, M12 – $197.21 $116.95 ETM312IUNC 7 INTER HSS 6-32, 8-32, 10-24, 1/4, 5/16, 3/8, 1/2 – $207.21 $116.95 ETC612IUNF 7 INTER HSS 6-40, 8-36, 10-32, 1/4, 5/16, 3/8, 1/2 – $220.22 $126.95 ETF612IBSW 7 INTER HSS 1/8, 5/32, 3/16,1/4, 5/16, 3/8, 1/2 – $236.06 $136.95 ETW1812I

METRIC 7 INTER HSS M3, M4, M5, M6, M8, M10, M12 2.5, 3.3, 4.2, 5, 6.8, 8.5, 10.2 $261.81 $147.95 EMDSX10IUNC 7 INTER HSS 6-32, 8-32, 10-24, 1/4, 5/16, 3/8, 1/2 2.9, 3.5, 3.9, 5.1, 6.6, 8, 10.8 $283.80 $158.95 ECDSX10IUNF 7 INTER HSS 6-40, 8-36, 10-32, 1/4, 5/16, 3/8, 1/2 3, 3.5, 4.1, 5.5, 6.9, 8.5, 11.5 $292.16 $169.45 EFDSX10IBSW 7 INTER HSS 1/8, 5/32, 3/16,1/4, 5/16, 3/8, 1/2 2.6, 3.2, 3.7, 5.1, 6.5, 7.9, 10.5 $297.55 $169.95 EWDSX10I

PACK TYPE

GOLIATH SEMI-SYNTHETIC RAPID-TAP FLUID A-9 ALUMINIUM CUTTING FLUID STICK-KUT WAX LUBRICANTPACK SIZE

METRIC$

SPECIALPART

NUMBERPACK SIZE

METRIC$

SPECIALPART

NUMBERPACK SIZE

METRIC$

SPECIALPART

NUMBERPACK SIZEIMPERIAL

$ SPECIAL

PARTNUMBER

BOTTLE 1 LITRE $29.95 CFWS1L 118ML $8.95 CFRT4OZ 118ML $8.95 CFA94OZBOTTLE 5 LITRE $119.95 CFWS5L 473ML $29.95 CFRT1PT 473ML $29.95 CFA91PTBOTTLE 3.785 LITRE $169.95 CFRT1G 3.785 LITRE $169.95 CFA91GDRUM 20 LITRE $449.95 CFWS20L 18.90 LITRE $649.95 CFRT5G

RAPID-TAP PASTETUB 236ML $34.95 CPRT8OZTUBE 15 OUNCE $34.95 CFSK15OZ


14, 16, 20, 22, 25, 32MMPART# 2670-S3

SPECIAL $61.50

16, 19, 22, 25, 32MMPART# 2670-S2

SPECIAL $44.50

QUAD MAX 4 FLUTE CUTTERS

25 MM 1"20 MM 13/16"16 MM 5/8"

QUAD MAX 4 FLUTE CUTTERS

32 MM 1-1/4"25 MM 1"22 MM 7/8"20 MM 13/16"16 MM 5/8"

16, 20, 25MMPART# 2673-S1

SPECIAL $39.00

16, 20, 22, 25, 32MMPART# 2673-S2

SPECIAL $63.95

QUAD MAX 4 FLUTE CUTTER SETSUse for all general drilling in wood.• Starts quickly in dry, wet and gummy wood. • Cutting spurs reduce splintering to ensure a smooth clean hole.• Four cutting surfaces – up to 10 times faster than standard spade bits.

HIGH CARBON FAST CUT SPADE BITSBordo fast cut spade bits are ideal for creating holes in a wide variety of timbers.• Low cost per hole.• Fast starting.• Heavy duty shank prevents bending.• Hex shank prevents slippage in chuck.• Hex shank ensures a positive lock in spade bit extensions.

IDEAL FOR

14G BUGLE HEAD

BATTEN SCREWS

SUITS 14G BUGLE ORCOUNTERSINKFLAT HEADSCREWS

14G4.8MMPILOT

DECK BITADJUSTABLE COUNTERSINK WITH PILOT DRILL

Prevents decking timber splittingNon-marking collarDepth adjustable countersinkSuitable foruse in hard &soft woodsReplaceable4.8mm HSS pilot drill

DECK BITADJUSTABLE COUNTERSINK WITH PILOT DRILL

IDEAL FOR

10G COUNTERSINK

DECKING SCREWS


Prevents decking timber splittingNon-marking collarDepth adjustable countersinkSuitable foruse in hard &soft woodsReplaceable3.0mm HSS pilot drill

10G3.0MMPILOT

DECK BITADJUSTABLE CARBIDE COUNTERSINK


Prevents decking timber splittingNon-marking collarDepth adjustable countersinkSuitable for use in hard & soft woodsReplaceable 3.0mm HSS pilot drill

10G3.0MMPILOT

HEAVY DUTY

TUNSGTEN

CARBIDE TIPPED

COUNTERSINK

CARBIDETOUGHEXTREMELIFE IN THETOUGHESTTIMBERS


14G4.8MMPILOT

DECK BITADJUSTABLE CARBIDE COUNTERSINK

Prevents decking timber splittingNon-marking collarDepth adjustable countersinkSuitable for use in hard & soft woodsReplaceable 4.8mm HSS pilot drill

HEAVY DUTY

TUNSGTEN

CARBIDE TIPPED

COUNTERSINK

CARBIDETOUGHEXTREMELIFE IN THETOUGHESTTIMBERS

19, 22, 25MMPART# 2670-S1

SPECIAL $22.50

12, 16, 20, 22, 25, 32MMPART# 2670-S4

SPECIAL $63.50

DECK BIT - HIGH CARBON STEEL LIST PRICE SPECIAL2203-10G 10G DECK BIT WITH ADJUSTABLE COUNTERSINK $49.13 $38.95 2203-14G 14G DECK BIT WITH ADJUSTABLE COUNTERSINK $52.73 $44.95

DECK BIT - TUNGSTEN CARBIDE TIPPED LIST PRICE SPECIAL2204-10G 10G TCT DECK BIT WITH ADJUSTABLE COUNTERSINK $74.06 $66.95 2204-14G 14G TCT DECK BIT WITH ADJUSTABLE COUNTERSINK $80.60 $71.95

DECK BIT WITH ADJUSTABLE COUNTERSINKBordo Deck Bits are fully adjustable to suit your specific fastener, timber species or custom application. Additionally Deck Bits feature:• Pilot hole to suit 10G or 14G screws.• Prevent decking timber splitting.• Adjustable, free spinning, non-marking collar.• Wide gullets prevent the jamming and clogging of wood chips.

16, 20, 22, 25, 32MMPART# 2673-S3

SPECIAL $58.45


METRIC TAP & DIE TAP SETPART# 4220-S2

SPECIAL $190.95

METRIC DRILL TAP SETPART# 3010-S1

SPECIAL $97.45

UNC DRILL TAP SETPART# 3011-S1

SPECIAL $97.45

METRIC COARSE CHROME TAP & DIE SET LIST PRICE SPECIAL4220-S2 M3, M4, M5, M6, M8, M10, M12 $499.69 $190.95QUICK CHANGE RATCHET SET LIST PRICE SPECIAL4996-1/2QC M2-M12 QUICK CHANGE RATCHET $166.97 $84.95

HSS DRILL TAP SETSDrill, Tap and Deburr in one operation. One piece design guarantees correct drill for tap size. Maximum capacity 10 gauge (3.5mm).

SABER ABS CASE SETS LIST PRICE SPECIAL10-SBM3P 1.0-13.0MM X 0.5MM – ABS CASE $174.12 $61.9510-SBM5P 1.0-6.5MM X 0.5MM, 7.0-13.0MM X 1.0MM - ABS CASE $142.25 $48.9511-SBF3P 1/16-1/2" X 1/64" – ABS CASE $192.21 $69.95

SABER METAL CASE SETS – STANDARD CHISEL POINT LIST PRICE SPECIAL10-SBM3 1.0-13.0MM X 0.5MM – METAL CASE $146.63 $48.9511-SBF3 1/16-1/2" X 1/64" – METAL CASE $154.84 $54.95

SABER METRIC DRILL ASSORTMENTPART# 10-SBMA1

SPECIAL $114.95

SABER METRIC DRILL ASSORTMENT - 105 PIECES1.0 to 4.0 x 0.5mm – 10 each, 4.5 to 6.5 x 0.5mm – 5 each, 8.0 & 10.0 – 5 each.

HSS SABER 135º SPLIT POINT IN ABS CASESHigh quality HSS bright finish drills for general purpose use.

QC RATCHET SETPART# 4996-1/2QC

SPECIAL $84.95


DIAMOND CORE DRILLSPART# 7084-S1

SPECIAL $105.95

COBALT LEFT HAND SETPART# 2005-S1

SPECIAL $47.45

SCREWOUT SETPART# 9901-S1

SPECIAL $46.95

SCREW EXTRACTOR SETPART# 9900-SM1

SPECIAL $45.45

SCREW EXTRACTOR SETPART# 9900-SM2

SPECIAL $63.45

SCREW EXTRACTOR SET 9900-SM1Chrome alloy spiral screw extractor set.• Coarse-pitched tapered screw thread.• Sizes 1-5.

SCREW EXTRACTOR SET 9900-SM2Chrome alloy spiral screw extractor set with left hand drills.• Coarse-pitched tapered screw thread.• Sizes 1-5.• Matching HSS-Co5 (Cobalt) left hand drills.

SCREWOUT SET 9901-S1For the rapid removal of damaged screws & bolts.• Removes #4 to #14 Screws.• Removes 5.0mm to 8.0mm Bolts.• Removes #10 to 5/16" Bolts.

DIAMOND HOLE SAWSPART# 7084-S2

SPECIAL $142.95

STEEL WIREThese brushes are suitable for a range of general applications in the paint, welding, and automotive trades. They are constructed using tempered steel wire and are the most economical general purpose brush.

STAINLESS STEEL WIREStainless steel wire scratch brushes are primarily used for metal finishing on smooth surfaces such as plating. The stainless steel wire is non-corrosive and suitable where hygiene requirements are a consideration or where moisture is present.Stainless steel wire scratch brushes are predominantly used in the welding or painting industries. Stainless steel wire resists oxidation and rusting.

STEEL WIRE SCRATCH BRUSHPART# 5175-SW-4RSPECIAL $9.50

STAINLESS WIRE SCRATCH BRUSHPART# 5175-SS-4R

SPECIAL $15.00

SLICK DTR DRILLING TAPPING AND REAMING FLUID - 250ML BOTTLESSlickDTR is formulated with extreme pressure additives that significantly reduce friction at the cutting edge, extending tool life, increasing performance and producing a superior finish. SlickDTR is suitable for use on all metals including hardened steels, titaniums and nimonics. • Fully biodegradable

SLICK DTR - 250MLPART# 8200-CF250

SPECIAL $16.95PER BOTTLE

SLICK DTR - 5 LITREPART# 8200-CF5L

SPECIAL $264.95PER BOTTLE

BORDO BRILLIANT DIAMOND HOLE SAWS AND CORE DRILLSSuitable for drilling tiles, ceramics, vitrified products, porcelain, natural and composite / engineered stone, monocottura, fibreglass, graphite, carbon fibre, FRP’s, and other highly abrasive materials.

DIAMOND HOLE SAW KITSaws feature a M14 thread for use on an angle grinder. Mandrel allows saws to be used in a pistol drill. Sizes up to and including 25mm feature a wax filled core that lubricates the cutting edge allowing dry, water free, drilling.

DIAMOND CORE DRILLS 1/4" HEX SHANK SETThe wax filled core lubricates the cutting edge allowing dry, water free, drilling.


HOLE SAW HOLE ENLARGER SETRe-cut your hole using a new size hole saw. Any hole between 52mm and 92mm can be enlarged. Minimum starting hole size 52mm. Minimum enlargement is 15mm greater than existing hole. Suits mandrels with 1/4" (6.35mm) pilot drill.

DESIGNEDBY AUSTRALIAN TRADIES

FOR AUSTRALIAN TRADIES

PLUMBER’S PIPE KIT12 SAWS PART# 7010-S3

SPECIAL $284.95

SPARKY’S KIT6 SAWS PART# 7010-S4SPECIAL $124.95

ELECTRICIAN’S MASTER KIT8 SAWS PART# 7010-S1SPECIAL $184.95

INDUSTRIAL KIT16 SAWS PART# 7010-S6

SPECIAL $379.95

LOCKSMITH’S KITPART# 7010-S5

SPECIAL $159.95

TRADESMAN’S KIT9 SAWS PART# 7030-S1SPECIAL $234.95

CHIPPY’S MASTER KIT11 SAWS PART# 7010-S2

SPECIAL $274.95

BI-METAL HOLE SAWSBordo bi-metal hole saws are premium quality, general purpose saws suitable for a wide variety of materials and applications. The high-speed steel cobalt (HSS-Co) cutting edge provides shock resistant teeth and resists tooth strippage. 4/6 positive tooth configuration allows for fast, smooth cuts and less vibration.

FEATURESHSS-Co Cobalt cutting edge.4/6 variable tooth configuration.48mm (1-7/8") depth of cut.5mm (3/16") thick heavy-duty backing plate eliminates need for drive plate.

HOLE ENLARGER SETPART# 7060-HES1

SPECIAL $52.95


RIPPER® PLUMBER’S TCT PIPE KIT12 SAWS PART# 7075-S3

SPECIAL $339.95

RIPPER® S1 TCT KIT9 SAWS PART# 7075-S1SPECIAL $249.95

XP2 TCT CUTTER KIT5 SAWS PART# 7081-S1SPECIAL $289.95

50MM ANNULAR CUTTER SET6 CUTTERS PART# 7400-S1X50

SPECIAL $349.95

THINWALL SHEETMETAL SET8 SAWS PART# 7040-S1SPECIAL $239.95

RIPPER HEAVY DUTY TUNGSTEN CARBIDE TIPPED HOLE SAWSIdeal for cutting timber and all types of composite board, particularly MDF. Ripper hole saws are also suitable for cutting wood laminates, plywood, insulation and fibre cement sheet.

FEATURESHeavy duty abrasion resistant tungsten carbide teeth will cut materials that quickly dull normal hole saws.Heavy duty construction for long life with large gullets for easy slug removal.

TUNGSTEN CARBIDE HOLE SAWSXP TCT hole saws are ideal for repetition cutting in steel plate, stainless steel plate and synthetic resin plates up to 4mm thick. XP2 TCT hole saws feature 3 edged cutters which balance the cutting effort for smoother boring, greater control and reduced drag. The deep body makes them ideal for use with curved surfaces such as metal pipes.

FEATURESExtremely long service life.No need for messy cutting fluids.Heavy duty plug ejector spring.

THINWALL SHEETMETAL SET8 SAWS PART# 7040-S2SPECIAL $137.95

TIPPER TCT KITS LIST PRICE SPECIAL7075-S1 9 SAWS – 25 TO 64MM $425.40 $249.95 7075-S3 12 SAWS – 16 TO 114MM $609.37 $339.95 7075-S2 9 SAWS WITH MANDRELS – 16 TO 60MM $643.96 $349.95

XP AND XP2 TCT KITS LIST PRICE SPECIAL7080-S1 5 SAWS – 16 TO 40MM $485.28 $234.95 7081-S1 5 DEEP CUT SAWS – 16 TO 40MM $718.63 $289.95

THINWALL SETS SPECIAL7040-S1 8 SAWS – 16 TO 38MM $239.95 7040-S2 5 SAWS – 20 TO 35MM $137.95

PLUMBER’S TCT PIPE SET 7075-S316mm 1/2" Copper20mm 1/2" Lagged Copper and 16mm PEX22mm 3/4" (20mm) Copper and 20mm PEX25mm 3/4" (20mm) Lagged Copper27mm 1" (25mm) Copper and 25mm PEX30mm 25mm Lagged Copper35mm 1-1/4" (32mm) Copper and 32mm PEX44mm 40mm PVC57mm 50mm PVC73mm 65mm PVC92mm 90mm PVC Stormwater114mm 100mm PVC

50MM ANNULAR CUTTER SET3 CUTTERS PART# 7400-S2X50

SPECIAL $174.95

HSS ANNULAR CUTTERSAnnular Cutters achieve burr-free finished holes without the need for pre-drilling or step drilling. Faster and more accurate than using standard HSS twist drills. Bordo Annular Cutters are CNC ground and feature multi-cut geometry for smooth and fast cutting. The precision ground flutes run the entire length of the cutter providing efficient chip removal.

FEATURESExtended tool life.Close tolerance drilling without runout.Reamed quality, burr free finished holes.Universal shank suits all popular machines.

ANNULAR CUTTER KITS LIST PRICE SPECIAL7400-S1X50 50MM CUT DEPTH 14 TO 25MM $549.01 $349.95 7400-S2X50 50MM CUT DEPTH 14 TO 22MM $296.52 $174.95 7400-S1X25 25MM CUT DEPTH 14 TO 25MM $480.18 $289.95 7400-S2X25 25MM CUT DEPTH 14 TO 22MM $234.39 $137.95

THINWALL SHEETMETAL HOLE SAWSIdeal for the electrical and plumbing tradesman. Each hole saw has a thin 0.65mm sidewall blade thickness, which allows for faster cutting and longer battery life. Ideal for chargeable impact drivers. Smooth and fast cutting — especially designed tooth geometry assures increased performance and better wear resistance.

FEATURESM42 material with special variable pitch tooth design for smoother cuts in sheet metal.Self ejecting plug removal.1/4" quick change shank, ideal for use with battery operated impact drivers.Safety collar stop helps prevent cutting too deep, and prevents damage to wires when drilling into electrical boxes.


LIST PRICE SPECIAL7202-S1 XTREME RECIP ASSORTMENT $105.73 $52.957200-S1 METAL RECIP ASSORTMENT $42.49 $24.957200-S2 WOOD RECIP ASSORTMENT $57.15 $29.95

RECIPROCATING SAW BLADE ASSORTMENTS

Xtreme 14 TPI Demolition & Rescue Saw Blades• For cutting pipe, angle iron, nail embedded wood and structural steel.

Xtreme 6 TPI Wrecking Saw Blades• For cutting wood, sleepers and other tough materials.

Metal Cutting Saw Blades• For cutting sheetmetal and tube.

Wood Cutting Saw Blades• For cutting nail embedded wood.

SELF FEEDING WOOD BIT SETPART# 2674-S1

SPECIAL $339.95

25MM AUGER EXTENSION SETPART# 2660-25S1

SPECIAL $309.95

LIST PRICE SPECIAL7170-BPM CARPENTER’S PENCIL $1.50 $1.05 7170-BPS CARPENTER’S SHARPENER $6.44 $4.25

8-22MM 5/16-7/8"CHAMFER AND DE-BURR BOLTS, PIPE,THREADED ROD, BAR AND DOWELS.

M2-HSS FOR EXTREME TOOL LIFE

CREATE A PERFECT CHAMFER ON FERROUS ANDNON-FERROUS METALS INCLUDING HARDENEDSTEELS, TIMBER, FIBREGLASS AND PLASTICS.

1/4"HEX

SHANK

CH

AM

FE

RS

SU

PE

R H

AR

D S

TE

EL

■ CYAN ■ MAGENTA ■ YELLOW ■ BLACK ■ SPOT PMS ■ DIE SHAPE (DO NOT PRINT)

9 326518 162865

Part# 2210-822

Mad

e in

Chi

na

Create a perfect chamfer for:• starting a nut on a bolt or threaded bar.• starting a button die or die nut on rod.• creating a leading edge on timber dowel.E-Z Chamfer efficiently removes burrs and ridges from bolts, pipe, threaded rod, bar and dowels. It is suitable for use on metals including mild and hardened steels, stainless steel, copper and brass, as well as timber, fibreglass and plastics.E-Z Chamfer prevents sparks and burns. When used correctly at low RPMs the tool will not overheat the workpiece. Threads and burrs are sheared off creating the perfect chamfer for starting a nut or threading die.

USE AT LOW SPEED – MAXIMUM 800RPM.USE IN IMPACT DRIVERS WILL REDUCE TOOL LIFE.GUIDELINES• Start E-Z Chamfer square to the workpiece. A circular motion

may improve performance on large diameter workpieces.• E-Z Chamfer works by shearing a small amount of material

every revolution. Slow drill speed with medium pressure will yield the best results in most materials. Hard materials will require a high feed pressure. In most applications it is only necessary to chamfer the first 1 to 3 threads.

• Read and follow safety instructions supplied in your owner’s manual before operating any power tool.

• Wear eye and hearing protection.

bordo.com.au

100% AUSTRALIAN OWNED FAMILY COMPANY

✔ MILD STEEL U.S. Grade 2, Metric Grade 4.8

✔ HARD STEEL U.S. Grade 5, Metric Grade 8.8

✔ VERY HARD STEEL U.S. Grade 8, Metric Grade 10.9

✔ STAINLESS STEEL 300 Series

✔ SUPER HARD STEEL U.S. Grade ASTM-A574, Metric Grade 12.9

1/4"HEX

SHANK

E-Z CHAMFER M2-HSS CHAMFER TOOLCreate a perfect chamfer for:• starting a nut on a bolt or threaded bar.• starting a button die or die nut on rod.• creating a leading edge on timber dowel.E-Z Chamfer efficiently removes burrs and ridges from bolts, pipe, threaded rod, bar and dowels. It is suitable for use on metals including mild and hardened steels, stainless steel, copper and brass, as well as timber, fibreglass and plastics.E-Z Chamfer prevents sparks and burns. When used correctly at low RPMs the tool will not overheat the workpiece. Threads and burrs are sheared off creating the perfect chamfer for starting a nut or threading die.

E-Z CHAMFERPART# 2210-822

SPECIAL $68.95

FLEXIBLE DUST BOWLPART# 7095-DB1

SPECIAL $42.45

RECIPROCATING SAW ASSORTMENT PACK WITH BALLISTIC NYLON POUCH



DIAMETER TEETH KERF BODY BORE BUSHES DESCRIPTION PART # LIST PRICE SPECIALMM INCH # MM MM MM MM RAPIDCUT160 6-1/4 20 1.6 1.0 20 16 FRAMING, RIPPING & CROSS CUTTING 7452-16020T $43.54 $26.45 184 7-1/4 24 1.6 1.0 20 16 ALL PURPOSE 7452-18424T $42.80 $26.45 184 7-1/4 40 1.6 1.0 20 16 ALL PURPOSE 7452-18440T $51.63 $31.95235 9-1/4 20 1.9 1.4 25 16 FRAMING, RIPPING & CROSS CUTTING 7452-23520T $82.37 $50.95 TRADECUT160 6-1/4 24 2.5 1.5 20 19, 16 FRAMING, RIPPING & CROSS CUTTING 7451-16024T $14.86 $12.45 160 6-1/4 40 2.5 1.5 20 19, 16 ALL PURPOSE 7451-16040T $19.13 $14.45184 7-1/4 24 2.5 1.5 20 16 ALL PURPOSE 7451-18424T $18.20 $14.45184 7-1/4 40 2.5 1.5 20 16 ALL PURPOSE 7451-18440T $22.08 $16.95235 9-1/4 20 2.8 1.8 25 20, 16 FRAMING, RIPPING & CROSS CUTTING 7451-23520T $29.83 $22.95235 9-1/4 40 2.8 1.8 25 20, 16 ALL PURPOSE 7451-23540T $32.92 $24.45 MULTICUT127 5 20 1.8 1.2 22.2 – TIMBER, STEEL & ALUMINIUM 7450-12720T $61.27 $43.45

tradecut® multicut®

• Heavy duty anti-kickback tooth shoulders which provide optimum support to the cutting tips ensuring maximum performance, extended blade life and safer cutting.

• Fully hardened and tempered steel body resists warping even in the most demanding applications.

• High performance diamond ground carbide for improved cutting efficiency – sharper for longer!

• Extreme performance titanium carbide metal cutting teeth provide long blade life.

• Cuts multiple materials including timber, ferrous metal, non-ferrous metal and plastics.

• Cool cutting, no heat, no burrs and minimal sparks when cutting metal.

• Dust free metal cutting. Unlike abrasive cutting wheels multicut blades create chips not dust.

rapidcut®

• Ultra thin kerf for faster, effortless cuts.• Tru-plate fully hardened and tempered steel

body is precision balanced to run truer.• High performance diamond ground carbide

for improved cutting efficiency – sharper for longer!

• Nano-shield coating reduces friction for reduced saw load, resists gumming keeping blade cooler and extending blade life.

DIAMETER350MM 14"

BORE1" & 20MMRIM TYPE

SEGMENTEDSEGMENT HEIGHT10MM

SEGMENTED RIM

GENERALPURPOSEHIGH DIAMOND COUNTWET & DRY CUTTINGCURED CONCRETE,MASONRY & STONE

TRADECUT

DIAMETER RIM SEGMENT BORE BUSHES DESCRIPTION PACK PART # LIST PRICE SPECIALMM INCH TYPE HEIGHT MM MM MM QTY TRADECUT DIAMOND350 14 SEGMENTED 10 1" 20 TRADECUT GENERAL PURPOSE DIAMOND 1 7470-350 $239.69 $121.95400 16 SEGMENTED 10 1" 20 TRADECUT GENERAL PURPOSE DIAMOND 1 7470-400 $319.65 $169.50

• High diamond count.• Segmented rim for clean, fast cuts both

wet and dry.• For cutting a wide range of non-abrasive

materials.


INOX FOR STAINLESSPART# 6400-S7

SPECIAL $211.95

CORNER RADIUSPART# 6400-S2

SPECIAL $158.95

NON-FERROUS CUTPART# 6401-S3

SPECIAL $206.95

EXPRESS CUTPART# 6400-S3

SPECIAL $158.95

DEBURRERS LIST PRICE SPECIAL6410-SWS STANDARD SWIVEL DEBURRER CONTAINING 3 X SE AND 3 X NB HSS BLADES AND ADAPTOR – CLAM SHELL $56.20 $42.456410-TSS TELESCOPIC DEBURRER CONTAINING 3 X SE AND 3 X NB HSS BLADES AND ADAPTOR – CLAM SHELL $80.01 $55.95 6410-SCS 3 EDGE SCRAPER DEBURRER CONTAINING STANDARD C42 8MM & SMALL C40 4MM SCRAPER BLADES – CLAM SHELL $126.16 $79.456411-A12SWS PEN DEBURRER WITH SE10 HEAVY DUTY HSS BLADE $21.59 $17.95 6410-SWSE10T SWIVEL DEBURRER WITH SE10 BLADE $19.28 $15.95

DEBURRING TOOLSRemove sharp edges, burrs and flashing with our comprehensive range of hand deburrers. A huge range of swivel and specialist blades are available to suit almost all applications. And our ergonomically designed soft grip handle includes blade storage points in the base.


SPECIAL $201.45

TUNGSTEN CARBIDE BURR SETS LIST PRICE SPECIAL6400-S2 CORNER RADIUS 6MM, 9.6MM, 12.7MM EXPRESS CUT TUNGSTEN CARBIDE 3 PIECE BURR SET $288.72 $158.956400-S3 SB-3, SC-3, SL-4 EXPRESS CUT TUNGSTEN CARBIDE 3 PIECE BURR SET $321.08 $158.956400-S5 SB-3, SC-3, SC-5, SF-3, SF-5 EXPRESS CUT TUNGSTEN CARBIDE 5 PIECE BURR SET $469.98 $201.45 6400-S7 SA-3, SC-5, SL-4 INOX TUNGSTEN CARBIDE 3 PIECE BURR SET $411.37 $211.956401-S3 SA-3NF, SC-3NF, SL-4NF NON-FERROUS CUT TUNGSTEN CARBIDE 3 PIECE BURR SET $395.14 $206.95

TUNGSTEN CARBIDE BURR SETS LIST PRICE SPECIAL6400-S4 1/2" CUT DIAMETER EXPRESS CUT TUNGSTEN CARBIDE 8 PIECE BURR SET: SA-5, SC-5, SD-5, SE-5, SF-5, SG-5, SL-4, SM-5 $903.32 $434.45 6400-S6 1/4" CUT DIAMETER EXPRESS CUT TUNGSTEN CARBIDE 8 PIECE BURR SET: SA-1, SC-1, SD-1, SE-1, SF-1, SG-1, SL-1, SM-2 $513.43 $262.956400-S10 AUTOMOTIVE EXPRESS CUT & NON-FERROUS TUNGSTEN CARBIDE 8 PIECE BURR SET: SA-1, SB-3, SB-5, SC-1, SD-1, SE-3, SF-3, SE-3NF $640.09 $317.956400-S11 3/8" CUT DIAMETER EXPRESS CUT TUNGSTEN CARBIDE 8 PIECE BURR SET: SB-3, SC-3, SD-3, SE-3, SF-3, SG-3, SL-3, SM-4 $654.04 $328.45


SPECIAL $262.95


SPECIAL $434.45


CENTRE DRILL SET PART# 2560-S1

SPECIAL $79.45

HSS CONE DRILL SET PART# 2605-S1

SPECIAL $333.85

HSS CONE DRILLSHEX SHANKSpiral flute M2 HSS drills.2605-M1 – 3-14mm2605-M2 – 4-20mm2605-M3 – 6-30mm

HSS STEP DRILL SET PART# 2604-S1

SPECIAL $254.35

HSS STEP DRILLSHEX SHANKSpiral flute M2 HSS drills.2604-M1 – 4-12mm2604-M2 – 4-20mm2604-M3 – 4-30mm

HSS-Co5 TiAlN COATED SET PART# 2602-S1

SPECIAL $264.95

HSS-Co5 (COBALT) TiAlN COATED STEP DRILLSDouble spiral flute drills.2602-M1 – 4-12mm2602-M2 – 4-20mm2602-M3 – 6-30mm


SPECIAL $249.05

HSS STEP DRILLSSpiral flute M2 HSS drills.2601-M1 – 4-12mm2601-M2 – 4-20mm2601-M3 – 4-30mm

ADJUSTABLE HOLE CUTTER PART# 7096-200A

SPECIAL $114.95

ADJUSTABLE HOLE CUTTERQuickly and safely cut large diameter holes in a wide variety of materials from 40 to 200mm. • Simple to adjust and built to last.• Supplied with two types of replaceable tungsten carbide blades.

HSS CENTRE DRILL SETCentre Drills are designed to drill a small diameter pilot hole followed by a 60° countersink which provides a bearing surface for the 60° point of the lathe centre.2560-1 – 1/8 body, 3/64 pilot2560-2 – 3/16 body, 5/64 pilot2560-3 – 1/4 body, 7/64 pilot2560-4 – 5/16body, 1/8 pilot2560-5 – 7/16 body, 3/16 pilot


SPECIAL $222.95

HSS STEP DRILLSDouble straight flute M2 HSS drills.2600-M1 – 4-12mm2600-M2 – 4-20mm2600-M3 – 6-30mm

LIST PRICE SPECIAL5200-MS CALICO MUSHROOM HEAD POLISHING MOP WITH SHANK $21.74 $17.50 5200-TS CALICO TAPER HEAD POLISHING MOP WITH SHANK $26.37 $17.50 5200-S1 CALICO POLISHING KIT $65.41 $39.95


Promotional pricing valid until 31 December 2020 but may be extended at the discretion of the authorised retailer. All prices include GST. Not valid in conjunction with any other special offers. E.& O.E.

100% AUSTRALIANOWNED FAMILY COMPANY

bordo.com.au bordo.com.au bordo.com.au bordo.com.au bordo.com.au bordo.com.au bordo.com.au bordo.com.au bordo.com.au bordo.com.au bordo.com.au bordo.com.au bordo.com.au

SAVAGE TUNGSTEN STEEL TAP & DIE SETS LIST PRICE SPECIAL50-S1 115 PIECE SAVAGE TAP & DIE SET METRIC & IMPERIAL $673.38 $299.95 50-S2 60 PIECE SAVAGE TAP & DIE SET METRIC & UNC/UNF + 1/8" NPT $291.24 $149.95 50-S3 39 PIECE SAVAGE TAP & DIE SET UNC/UNF + 1/8" NPT $177.67 $91.95 50-S4 39 PIECE SAVAGE TAP & DIE SET METRIC + 1/8" NPT $177.67 $91.95

SAVAGE CROSS HOLE COUNTERSINK PART# 32-S1

SPECIAL $124.95

SAVAGE TiN COATED STEP DRILL SET PART# 30-S1SPECIAL $179.95

SAVAGE METRIC TAP &DRILL SET PART# 50-S5

SPECIAL $74.95

SAVAGE 3 FLUTE COUNTERSINK PART# 34-S1

SPECIAL $124.95

SABER BURR SETPART# 20-SBS1

SPECIAL $141.00

SABER BURR SETPART# 20-SBS2

SPECIAL $91.95

SABER STEP DRILL SETPART# 31-SBS1

SPECIAL $109.95SAVAGE DIAMOND CORE DRILL SET5, 6, 6.5, 8 & 10mm core drills plus suction drilling template.

SAVAGE DIAMOND CORE DRILL SET PART# 62-S1

SPECIAL $69.95

AUTHORISED DISTRIBUTOR


Documents

SPRING INTO SUMMER … · SPRING INTO SUMMER WITH RED HOT PRICES SIS_2020_16ppA4_Retail_v2.indd 1 27/8/20 8:02 am