Upload
aubrie-butler
View
215
Download
0
Tags:
Embed Size (px)
Citation preview
SRT251 Comstruction and Structures 2
Major Project
Warehouse and Office Complex Scenario
Yan Loi (Rex) Wong
ID: 500144586
•1998 Pritzker Architecture Prize winner.
•Educated in Milan Polytechnic School of Architecture.
•Work includes: The Pompidou Centre and The J M Tjibaru Cultural Centre.
•Interested in technology, pre-fabrication and fine craftship.
•Used quite a lot of timber (compare with other Pritzker Prize winners) and louvres (used as outer skin to block direct sun light).
•Used a lot of repetitions, easy to be pre-fabricated and mass-produced.
Renzo Piano
Timber Portal Frames
•There are a lot of different styles of timber portal frames.
•Some timber portal frames could be with a hinge for easy erection, as shown in the previous slide.
•Some are made with columns and rafters, with a fixed steel bracket connecting them, as shown in this slide.
My Proposal
•Double box timber portal frame, which could span the whole 40m, with a height of 9.8m (similar to the CSR store building in Cardiff, NSW.
•Pre-fabricated toilets and kitchen units units for office space.
•Timber walkway as upper level of warehouse (simple timber framing construction), for managers to observe operation in warehouse floor.
•Pre-fabricated, louvred windows.
CSR Store Building• Engineer
Timberbuilt Pty Ltd
• OwnerCSR Wood Panels
• BuilderCooper Constructions
• LocationMitchell Crescent, Cardiff, NSW
LegendPortal frame .1
Purlin, 400 mm I section .2Steel flat bracing, 50 x 2 mm .3
Tapering box cloumn, 1200 - 1000 x 300 mm .4Box rafter, 1200 x 330 mm .5
Rafter splice plate, 1200 x 240 mm .6Nailed LVL gusset, 63 mm .7Nailed LVL gusset, 54 mm .8
Purlin restraint .9
Information used in this PowerPoint is from the Timber Building In Australia website: http://oak.arch.utas.edu.au/tbia/default.asp
CSR Store Building
Information used in this PowerPoint is from the Timber Building In Australia website: http://oak.arch.utas.edu.au/tbia/default.asp