8/16/2019 Srt7004 Usb Sw Update En

1/1

 

www.strong.tv 

SRT 7004 Software Update with USB

The upgrade can be performed with a USB device, preferably a USB pen drive, which must be

formatted in FAT32.

NOTE: The USB port on the front is specifically adapted for software updates and backups.

1. Download the file to your computer and unzip the file, and then copy it to the root folder of

your USB storage device.

2. Connect the USB storage device to the front USB port of the receiver.

3. Press MENU on the remote control and select System  -> Update & Backup  -> Image

Upgrade .

4. Select the appropriate USB device (USB0 or USB1).

5. Press OK to enter the software file list and select the file containing the software image with

▲▼◄► and press OK to initiate the software update. An attention banner will now be

displayed.

6. Press OK to start the update (or EXIT to cancel it).

Follow the instructions which are displayed on screen. The update process will take some time.

After the update process has been completed, the receiver will reboot and the receiver will start

with the first time installation.

Warning: NEVER power off the receiver or remove the USB device during the software update

process. Doing so might cause irreparable damage to your receiver and will void your warranty.