Standard and Sets in Graphic Cases for Trauma Surgery

2

Listing: 91-001.00 Standard Instrument Set for Dynamic Hip and Condylar Screws and Plates

Standard Instrument Set for Dynamic and Condylar Screws and Plates in Graphic Case

60-500.10 Sterilization Container (recommended)

91-001.01 Tray for Instrument Set, Dynamic Hip and Condylar Screws and Plates (Steel)

Rev

.: 06

0705

3

Listing: 91-001.00 Standard Instrument Set for Dynamic Hip and Condylar Screws and Plates

91-001.01 Tray for Instrument Set, Dynamic Hip and Condylar Screws and Plates (Steel)

Cat. No.: Pcs.:95-085.00 Calibrated Threaded Guide Pin Dia. 2.5mm x 230 mm Length, Threaded Length 10 mm 1095-086.00 Drill Guide adjustable to 125° / 130° / 135° / 140° / 145° / 150° 195-087.00 Measuring Gauge 195-088.00 Triple Reamer complete for Dynamic Hip Plate System 195-089.00 Tap 195-090.00 Guide Sleeve, short, for tapping 195-091.00 Guide Sleeve, long, for screwing in of Lag Screws 195-092.00 Guide Shaft for Insertion of Coupling Screws 195-093.00 Coupling Screw for Femoral Dynamic Hip Screws 195-094.00 Guide Shaft 195-095.00 Wrench 195-096.00 Impactor 195-097.00 Handle 195-078.40 Drill Guide 95° 195-088.01 Triple Reamer complete for Dynamic Condylar System 1

Standard Instrument Set for Dynamic and Condylar Screws and Plates in Graphic Case

4

60-500.10 Sterilization Container (recommended)

91-002.01 Tray for Dynamic Hip Screw Standard Implant Set (Steel)

Listing: 91-002.00 Dynamic Hip Screw Standard Implant Set (Steel Plates in Mat. DIN ISO 5832-1)

Dynamic Hip Screw Standard Implant Set in Graphic Case

5

Listing: 91-002.00 Dynamic Hip Screw Standard Implant Set (Steel Plates in Mat. DIN ISO 5832-1)

91-002.01 Tray for Dynamic Hip Screw Standard Implant Set (Steel)

Cat. No.: Dynamic Lag Screw, Thread Length 22 mm Pcs.:95-083.04 Length 65 mm, Steel 195-083.05 Length 70 mm, Steel 195-083.06 Length 75 mm, Steel 195-083.07 Length 80 mm, Steel 195-083.08 Length 85 mm, Steel 195-083.09 Length 90 mm, Steel 195-083.10 Length 95 mm, Steel 195-083.11 Length 100 mm, Steel 195-083.12 Length 105 mm, Steel 195-083.13 Length 110 mm, Steel 195-083.14 Length 115 mm, Steel 1

95-078.00 Compression Screw 3

Cat. No.: Dynamic Hip Screw Plates 135°95-079.04 4 Holes,Length 78 mm, Steel 395-079.05 5 Holes,Length 94 mm, Steel 295-079.06 6 Holes,Length 110 mm, Steel 2

Cat. No.: Dynamic Hip Screw Plates 150°95-082.04 4 Holes,Length 78 mm, Steel 195-082.05 5 Holes,Length 94 mm, Steel 195-082.06 6 Holes,Length 110 mm, Steel 1

Dynamic Hip Screw Standard Implant Set in Graphic Case

6

60-500.10 Sterilization Container (recommended)

91-003.01 Tray for Dynamic Condylar Standard Implant Set (Steel)

Listing: 91-003.00 Dynamic Condylar Standard Implant Set (Steel Plates in Mat. DIN ISO 5832-1)

Dynamic Condylar Standard Implant Set in Graphic Case

7

Listing: 91-003.00 Dynamic Condylar Standard Implant Set (Steel Plates in Mat. DIN ISO 5832-1)

91-003.01 Tray for Dynamic Condylar Standard Implant Set (Steel)

Cat. No.: Dynamic Lag Screw, Thread Length 22 mm Pcs.:95-083.01 Length 50 mm, Steel 295-083.02 Length 55 mm, Steel 295-083.03 Length 60 mm, Steel 295-083.04 Length 65 mm, Steel 295-083.05 Length 70 mm, Steel 295-083.06 Length 75 mm, Steel 1

95-078.00 Compression Screw 3

Cat. No.: Dynamic Condylar Screw Plates 95°95-078.20 6 Holes,Length 100 mm, Steel 295-078.21 8 Holes,Length 130 mm, Steel 295-078.22 10 Holes,Length 163 mm, Steel 295-078.23 12 Holes,Length 198 mm, Steel 195-078.24 14 Holes,Length 225 mm, Steel 195-078.25 16 Holes,Length 260 mm, Steel 1

Dynamic Condylar Standard Implant Set in Graphic Case

8

60-500.10 Sterilization Container (recommended)

91-004.01 Tray for Broad and Narrow Plates Set

Listing: 91-004.00 Broad and Narrow Plates Set (Steel Plates in Mat. DIN ISO 5832-1)

Broad and Narrow Plates Set in Graphic Case

9

Listing: 91-004.00 Broad and Narrow Plates Set(Steel Plates in Mat. DIN ISO 5832-1)

91-004.01 Tray for Broad and Narrow Plates Set (Steel)

Semi-tubular Plates Pcs.95-141.04 4.5 / 4 Hole, Length 71 mm Steel 295-141.05 4.5, 5 / 5 Hole, Length 87 mm Steel 295-141.06 4.5 / 6 Hole, Length 103 mm Steel 295-141.07 4.5 / 7 Hole, Length 119 mm Steel 1

Narrow Dynamic Compression Plates95-139.04 4.5 / 4 Hole, Length 71 mm Steel 295-139.05 4.5 / 5 Hole, Length 87 mm Steel 295-139.06 4.5 / 6 Hole, Length 103 mm Steel 495-139.07 4.5 / 7 Hole, Length 119 mm Steel 295-139.08 4.5 / 8 Hole, Length 135 mm Steel 295-139.09 4.5 / 9 Hole, Length 151 mm Steel 295-139.10 4.5 / 10 Hole, Length 167 mm Steel 195-139.12 4.5 / 12 Hole, Length 199 mm Steel 1

Broad Dynamic Compression Plates95-140.06 4.5 / 6 Hole, Length 103 mm Steel 295-140.07 4.5 / 7 Hole, Length 119 mm Steel 295-140.08 4.5 / 8 Hole, Length 135 mm Steel 295-140.09 4.5 / 9 Hole, Length 151 mm Steel 195-140.10 4.5 / 10 Hole, Length 167 mm Steel 195-140.12 4.5 / 12 Hole, Length 199 mm Steel 195-140.14 4.5 / 14 Hole, Length 231 mm Steel 1

Spoon Plates95-144.05 4.5 / 5 Hole, Length 100 mm Steel 195-144.06 4.5 / 6 Hole, Length 120 mm Steel 1

T-Plates95-145.04 4.5 / 4 Hole, Length 84 mm Steel 195-145.05 4.5 / 6 Hole, Length 116 mm Steel 195.145.06 4.5 / 8 Hole, Length 148 mm Steel 1

T-Buttress Plate95.142.04 4.5 / 4 Hole, Length 81 mm Steel 1

L-Buttress Plate95-143.01 4.5 / 4 Hole, Length 85 mm left Steel 195.143.02 4.5 / 4 Hole, Length 85 mm right Steel 1

Broad and Narrow Plates Set in Graphic Case

10

60-520.15 Sterilization Container (recommended)

95-123.52 Tray for Screw Set

Listing: 95-123.50 Screw Set(Steel Screws in Mat. DIN ISO 5832-1)

Steel Screw Set in Graphic Case

11

Listing: 95-123.50 Screw Plates Set(Steel Screws in Mat. DIN ISO 5832-1)

95-123.52 Tray for Screw Set

Steel Screw Set in Graphic Case

Cat. No. Dia 4.5 mm Cortex Screws. Pcs.95-131.14 Length 14 mm 695-131.16 Length 16 mm 695-131.18 Length 18 mm 695-131.20 Length 20 mm 695-131.22 Length 22 mm 695-131.24 Length 24 mm 695-131.26 Length 26 mm 795-131.28 Length 28 mm 795-131.30 Length 30 mm 1495-131.32 Length 32 mm 1495-131.34 Length 34 mm 1495-131.36 Length 36 mm 1495-131.38 Length 38 mm 795-131.40 Length 40 mm 1495-131.42 Length 42 mm 695-131.44 Length 44 mm 695-131.46 Length 46 mm 695-131.48 Length 48 mm 395-131.52 Length 52 mm 395-131.56 Length 56 mm 395-131.60 Length 60 mm 395-131.65 Length 65 mm 395-131.70 Length 70 mm 3

Cat. No. Dia 6.5 mm/16 Cortex Screws. Pcs.95-133.065 Length 65 mm 295-133.070 Length 70 mm 295-133.075 Length 75 mm 295-133.080 Length 80 mm 295-133.085 Length 85 mm 295-133.090 Length 90 mm 295-133.095 Length 95 mm 295-133.100 Length 100 mm 295-133.105 Length 105 mm 295-133.110 Length 110 mm 2

Cat. No. Dia 6.5 mm/16 Cortex Screws. Pcs.95-134.045 Length 45 mm 395-134.050 Length 50 mm 395-134.055 Length 55 mm 395-134.060 Length 60 mm 395-134.065 Length 65 mm 395-134.070 Length 70 mm 395-134.075 Length 75 mm 395-134.080 Length 80 mm 395-134.085 Length 85 mm 395-134.090 Length 90 mm 395-134.095 Length 95 mm 395-134.100 Length 100 mm 395-134.105 Length 105 mm 395-134.110 Length 110 mm 3

Cat. No. Dia 4.5 mm Malleolar Screws. Pcs.95-132.25 Length 25/12 mm 395-132.30 Length 30/15 mm 395-132.35 Length 35/18 mm 395-132.40 Length 40/20 mm 395-132.45 Length 45/22 mm 395-132.50 Length 50/24 mm 395-132.55 Length 55/26 mm 395-132.60 Length 60/28 mm 395-132.65 Length 65/30 mm 395-132.70 Length 70/32 mm 3

Cat. No. Dia 6.5 mm/16 mm Cancellous Screws. Pcs.95-133.030 Length 30 mm 295-133.035 Length 35 mm 295-133.040 Length 40 mm 295-133.045 Length 45 mm 295-133.050 Length 50 mm 295-133.055 Length 55 mm 295-133.060 Length 60 mm 2

Cat. No. Dia 6.5 mm/16 mm Cancellous Screws. Pcs.fully threaded

95-135.025 Length 25 mm 495-135.030 Length 30 mm 495-135.035 Length 35 mm 495-135.040 Length 40 mm 495-135.045 Length 45 mm 295-135.050 Length 50 mm 295-135.055 Length 55 mm 295-135.060 Length 60 mm 295-135.065 Length 65 mm 295-135.070 Length 70 mm 295-135.075 Length 75 mm 295-135.080 Length 80 mm 295-135.085 Length 85 mm 295-135.090 Length 90 mm 295-135.095 Length 95 mm 295-135.100 Length 100 mm 295-135.105 Length 105 mm 295-135.110 Length 110 mm 2

Cat. No. Dia 6.5 mm/16 mm Cancellous Screws. Pcs.95-121.13 Washer for Dia. 6.5 mm

Cancellous Screws 695-193.00 Forceps 1

12

60-520.15 Sterilization Container (recommended)

95-123.52 Tray for Screw Set

Listing: 95-123.50Ti Screw Set(Titanium Screws in Mat. DIN ISO 5832-1)

Titanium Screw Set in Graphic Case

13

Listing: 95-123.50Ti Screw Plates Set(Titanium Screws in Mat. DIN ISO 5832-1)

95-123.52 Tray for Screw Set

Titanium Screw Set in Graphic Case

Cat. No. Dia 4.5 mm Cortex Screws. Pcs.95-131.14Ti Length 14 mm 695-131.16Ti Length 16 mm 695-131.18Ti Length 18 mm 695-131.20Ti Length 20 mm 695-131.22Ti Length 22 mm 695-131.24Ti Length 24 mm 695-131.26Ti Length 26 mm 795-131.28Ti Length 28 mm 795-131.30Ti Length 30 mm 1495-131.32Ti Length 32 mm 1495-131.34Ti Length 34 mm 1495-131.36Ti Length 36 mm 1495-131.38Ti Length 38 mm 795-131.40Ti Length 40 mm 1495-131.42Ti Length 42 mm 695-131.44Ti Length 44 mm 695-131.46Ti Length 46 mm 695-131.48Ti Length 48 mm 395-131.52Ti Length 52 mm 395-131.56Ti Length 56 mm 395-131.60Ti Length 60 mm 395-131.65Ti Length 65 mm 395-131.70Ti Length 70 mm 3

Cat. No. Dia 6.5 mm/16 Cortex Screws. Pcs.95-133.065Ti Length 65 mm 295-133.070Ti Length 70 mm 295-133.075Ti Length 75 mm 295-133.080Ti Length 80 mm 295-133.085Ti Length 85 mm 295-133.090Ti Length 90 mm 295-133.095Ti Length 95 mm 295-133.100Ti Length 100 mm 295-133.105Ti Length 105 mm 295-133.110Ti Length 110 mm 2

Cat. No. Dia 6.5 mm/16 Cortex Screws. Pcs.95-134.045Ti Length 45 mm 395-134.050Ti Length 50 mm 395-134.055Ti Length 55 mm 395-134.060Ti Length 60 mm 395-134.065Ti Length 65 mm 395-134.070Ti Length 70 mm 395-134.075Ti Length 75 mm 395-134.080Ti Length 80 mm 395-134.085Ti Length 85 mm 395-134.090Ti Length 90 mm 395-134.095Ti Length 95 mm 395-134.100Ti Length 100 mm 395-134.105Ti Length 105 mm 395-134.110Ti Length 110 mm 3

Cat. No. Dia 4.5 mm Malleolar Screws. Pcs.95-132.25Ti Length 25/12 mm 395-132.30Ti Length 30/15 mm 395-132.35Ti Length 35/18 mm 395-132.40Ti Length 40/20 mm 395-132.45Ti Length 45/22 mm 395-132.50Ti Length 50/24 mm 395-132.55Ti Length 55/26 mm 395-132.60Ti Length 60/28 mm 395-132.65Ti Length 65/30 mm 395-132.70Ti Length 70/32 mm 3

Cat. No. Dia 6.5 mm/16 mm Cancellous Screws. Pcs.95-133.030Ti Length 30 mm 295-133.035Ti Length 35 mm 295-133.040Ti Length 40 mm 295-133.045Ti Length 45 mm 295-133.050Ti Length 50 mm 295-133.055Ti Length 55 mm 295-133.060Ti Length 60 mm 2

Cat. No. Dia 6.5 mm/16 mm Cancellous Screws. Pcs.fully threaded

95-135.025Ti Length 25 mm 495-135.030Ti Length 30 mm 495-135.035Ti Length 35 mm 495-135.040Ti Length 40 mm 495-135.045Ti Length 45 mm 295-135.050Ti Length 50 mm 295-135.055Ti Length 55 mm 295-135.060Ti Length 60 mm 295-135.065Ti Length 65 mm 295-135.070Ti Length 70 mm 295-135.075Ti Length 75 mm 295-135.080Ti Length 80 mm 295-135.085Ti Length 85 mm 295-135.090Ti Length 90 mm 295-135.095Ti Length 95 mm 295-135.100Ti Length 100 mm 295-135.105Ti Length 105 mm 295-135.110Ti Length 110 mm 2

Cat. No. Dia 6.5 mm/16 mm Cancellous Screws. Pcs.95-121.13Ti Washer for Dia. 6.5 mm

Cancellous Screws 695-193.00 Forceps 1

14

60-500.10 Sterilization Container(recommended)

91.005.01 Tray for Basic Instrument Set (Steel)

Listing: 91-005.00 Basic Instrument Set for Screws and Plates(Steel Plates in Mat. DIN ISO 5832-1)

Basic Instrument Set for Screws and Plates in Graphic Case

15

Listing: 91-005.00 Basic Instrument Set for Screws and Plates (Steel Plates in Mat. DIN ISO 5832-1)

91-005.01 Tray for Basic Instrument Set (Steel)

Cat. No.: Pcs.:95-169.17 DrillBit,ø3.2mm,withendtofitquickcoupling 395-169.24 DrillBit,ø4.5mm,withendtofitquickcoupling 295-173.02 MalleolarCountersink,3.2ømmtip,forMalleolarScrews 195-172.01 TapHandleforø4.5mmandø6.5mmTapsandCountersink 195-170.07 Tap , ø 4.5 mm 295-170.09 Tap , ø 6.5 mm 195-186.02 Tap Sleeve , ø 3.5 mm ( also for use as ø 3.2 mm Drill Guide ) 195-185.09 Insert Drill Sleeve , ø 4.5 mm / ø 3.2 mm , 58 mm Length 195-186.01 Tap Sleeve , ø 4.5 mm ( also for use as ø 4.5 mm Drill Guide ) 195-176.03 HexagonalScrewdriver,widthacrossflats3.5mm 195-178.20 HexagonalScrewdriverforquickcoupling,widthacrossflats3.5mm 195-174.01 Depth Gauge for ø 4.5 mm and ø 6.5 mm Screws 195-175.00 SharpHook 195-185.01 Drill Sleeve for Plates , 40 mm Length , for Round Hole Plates 195-181.00 Articulated Tension Device with Gauge , 20 mm span 195-182.00 SocketWrench,widthacrossflats11mm 195-106.00 CombinationWrench,widthacrossflats11mm 195-185.04 Neutral and Load Drill Guide , ø 4.5 mm 195-189.01 Bending Template , 5 Holes 195-189.02 Bending Template , 7 Holes 195-189.03 Bending Template , 9 Holes 195-173.01 Countersinkø4.5mm 195-233.20 Kirschner Wires ø 2.0 mm / 150 mm ( Steel ) 1

Basic Instrument Set for Screws and Plates in Graphic Case

16

91-006.01 TrayforSmallFragmentInstrumentandSteelImplantSet

60-500.13 Sterilization Container (recommended)

Listing: 91-006.00 Small Fragment Instrument and Steel Implant Set (Steel Screws and Plates in Mat. DIN ISO 5832-1)

Small Fragment Instrument and Steel Implant Setin Graphic Case

17

Listing: 91-006.00 Small Fragment Instrument and Steel Implant Set (Steel Screws and Plates in Mat. DIN ISO 5832-1)

91-006.01 Tray for Small Fragment Instrument and Steel Implant Set

Cat.No.: Instruments for Dia. 3.5mm / Dia. 4.0mm Screws Pcs.: Screw type used in ( Dia. mm )95-169.15 DrillBitDia.2.5mmwithquickcouplingend 2 4.0mm(CancellousScrews)95-169.19 DrillBitDia.3.5mmwithquickcouplingend 2 3.5mm(CortexScrews)95-173.03 SmallCountersinkwithquickcouplingend 195-170.04 CorticalTapDia.3.5mmwithquickcouplingend 2 3.5mm(CortexScrews)95-170.55 CancellousTapDia.4.0mmwithquickcouplingend 2 4.0mm(CancellousScrews)95-172.03 Handlewithquickcoupling 195-185.08 Drill Guide and Drill Sleeve for Drill Bit Dia. 2.0 mm 195-187.00 Tap Sleeve Dia.3.5 mm, Sleeve for Drill Bit Dia.2.5mm 195-185.10 Insert Sleeve Dia.3.5mm / Dia. 2.5mm 195-178.01 SmallHexagonalScrewdriver,insertforHex.-Socket2.5mm 195-178.04 Small Hexagonal Screwdriver Shaft, Hex. 2.5mm 195-174.02 Small Depth Gauge 195-185.06 Neutral Drill Guide Dia. 3.5 mm, used for Drill Bit 2.5 mm 1 Cat.No.: General Instruments Pcs.: Screw type used in ( Dia. mm )95-175.00 SharpHook 195-190.02 Bending Iron for Small Plates 195-190.03 Bending Iron for Small Plates 195-189.06 Bending Template for Small Plates 7 Holes 195-189.07 Bending Template for Small Plates 9 Holes 195-295.09 Self-centring Bone Holding Forceps 195-298.00 Reduction Forceps with points 195-299.00 Reduction Forceps for Small Fragments 195-321.00 Small Hohmann Retractor 6 mm 195-322.00 Small Hohmann Retractor 8 mm 195-323.00 HohmannRetractorwithbroadshank 195-327.00 Periosteal Elevator, width 6 mm small, straight edge 195-193.00 Screw Forceps self holding 1

Cat.No.: Dia. 3.5 mm Cortex Screws Pcs.: Cat.No. : Dia. 4.0 mm Cancellous Screws short Thread Pcs.:95-127.10 Length 10 mm , Steel 8 95-129.12 Length 12 mm / 5 mm, Steel 695-127.12 Length 12 mm , Steel 8 95-129.14 Length 14 mm / 5 mm, Steel 695-127.14 Length 14 mm , Steel 8 95-129.16 Length 16 mm / 6 mm, Steel 695-127.16 Length 16 mm , Steel 8 95-129.18 Length 18 mm / 7 mm, Steel 695-127.18 Length 18 mm , Steel 8 95-129.20 Length 20 mm / 8 mm, Steel 695-127.20 Length 20 mm , Steel 8 95-129.22 Length 22 mm / 9 mm, Steel 695-127.22 Length 22 mm , Steel 8 95-129.24 Length 24 mm / 10 mm, Steel 695-127.24 Length 24 mm , Steel 8 95-129.26 Length 26 mm / 12 mm, Steel 695-127.26 Length 26 mm , Steel 8 95-129.28 Length 28 mm / 14 mm, Steel 695-127.28 Length 28 mm , Steel 8 95-129.30 Length 30 mm / 14 mm, Steel 695-127.32 Length 32 mm , Steel 8 95-129.35 Length 35 mm / 14 mm, Steel 695-127.36 Length 36 mm , Steel 8 95-129.40 Length 40 mm / 14 mm, Steel 695-127.40 Length 40 mm , Steel 8 95-129.45 Length 45 mm / 15 mm, Steel 695-127.45 Length 45 mm , Steel 8 95-129.50 Length 50 mm / 15 mm, Steel 695-127.50 Length 50 mm , Steel 8 95-121.07 Small Washer for Dia. 3.5 mm / 4.0 mm Screws 6Cat.No. : Dia. 4.0 mm Cancellous Screws full Thread Pcs.:95-130.14 Length 14 mm, Steel 6 95-121.07 Small T-Plate right angle 3/3 Holes Steel 195-130.16 Length 16 mm, Steel 6 95-155.04 Small T-Plate right angle 4/4 Holes Steel 195-130.18 Length18mm,Steel 6 95-157.03 SmallT-Plateobliqueangle3/3HolesSteel 195-130.20 Length20mm,Steel 6 95-157.05 SmallT-Plateobliqueangle5/3HolesSteel 195-130.22 Length 22 mm, Steel 6 95-130.24 Length 24 mm, Steel 6 95-154.02 One Third Tubular Plate 2 Holes, Steel 195-130.26 Length 26 mm, Steel 6 95-154.03 One Third Tubular Plate 3 Holes, Steel 195-130.28 Length 28 mm, Steel 6 95-154.04 One Third Tubular Plate 4 Holes, Steel 195-130.30 Length 30 mm, Steel 6 95-154.05 One Third Tubular Plate 5 Holes, Steel 195-130.32 Length 32 mm, Steel 6 95-154.06 One Third Tubular Plate 6 Holes, Steel 195-130.35 Length 35 mm, Steel 6 95-154.07 One Third Tubular Plate 7 Holes, Steel 195-130.40 Length 40 mm, Steel 6 95-154.08 One Third Tubular Plate 8 Holes, Steel 195-130.45 Length 45 mm, Steel 6 95-130.50 Length 50 mm, Steel 6 95-146.03 Cloverleaf Plate, Shaft 3 Holes, Steel 195-130.55 Length 55 mm, Steel 4 95-146.04 Cloverleaf Plate, Shaft 4 Holes, Steel 195-130.60 Length 60 mm, Steel 4 95-153.06 Small Fragment Plate 6 Holes, Steel 2 95-153.07 Small Fragment Plate 7 Holes, Steel 2 95-153.08 Small Fragment Plate 8 Holes, Steel 2 95-153.09 Small Fragment Plate 10 Holes, Steel 2

95-233.12 Kirschner Wire Dia.1.2 mm x Length 150 mm, Steel 12 95-233.16 Kirschner Wire Dia.1.6 mm x Length 150 mm, Steel 12 95-233.20 Kirschner Wire Dia.2.0 mm x Length 150 mm, Steel 12

Small Fragment Instrument and Steel Implant Setin Graphic Case

18

91-006.01 Tray for Small Fragment Instrument and Steel Implant Set

60-500.13 Sterilization Container (recommended)

Listing: 91-006.00Ti Small Fragment Instrument and Titanium Implant Set (Titanium Screws and Plates in Mat. DIN ISO 5832-3)

Small Fragment Instrument and Steel Implant Setin Graphic Case

19

Listing: 91-006.00Ti Small Fragment Instrument and Titanium Implant Set (Titanium Screws and Plates in Mat. DIN ISO 5832-3)

91-006.01 Tray for Small Fragment Instrument and Titanium Implant Set

Cat.No.: Instruments for Dia. 3.5mm / Dia. 4.0mm Screws Pcs.: Screw type used in ( Dia. mm )95-169.15 DrillBitDia.2.5mmwithquickcouplingend 2 4.0mm(CancellousScrews)95-169.19 DrillBitDia.3.5mmwithquickcouplingend 2 3.5mm(CortexScrews)95-173.03 SmallCountersinkwithquickcouplingend 195-170.04 CorticalTapDia.3.5mmwithquickcouplingend 2 3.5mm(CortexScrews)95-170.55 CancellousTapDia.4.0mmwithquickcouplingend 2 4.0mm(CancellousScrews)95-172.03 Handlewithquickcoupling 195-185.08 Drill Guide and Drill Sleeve for Drill Bit Dia. 2.0 mm 195-187.00 Tap Sleeve Dia.3.5 mm, Sleeve for Drill Bit Dia.2.5mm 195-185.10 Insert Sleeve Dia.3.5mm / Dia. 2.5mm 195-178.01 SmallHexagonalScrewdriver,insertforHex.-Socket2.5mm 195-178.04 Small Hexagonal Screwdriver Shaft, Hex. 2.5mm 195-174.02 Small Depth Gauge 195-185.06 Neutral Drill Guide Dia. 3.5 mm, used for Drill Bit 2.5 mm 1 Cat.No.: General Instruments Pcs.: Screw type used in ( Dia. mm )95-175.00 SharpHook 195-190.02 Bending Iron for Small Plates 195-190.03 Bending Iron for Small Plates 195-189.06 Bending Template for Small Plates 7 Holes 195-189.07 Bending Template for Small Plates 9 Holes 195-295.09 Self-centring Bone Holding Forceps 195-298.00 Reduction Forceps with points 195-299.00 Reduction Forceps for Small Fragments 195-321.00 Small Hohmann Retractor 6 mm 195-322.00 Small Hohmann Retractor 8 mm 195-323.00 HohmannRetractorwithbroadshank 195-327.00 Periosteal Elevator, width 6 mm small, straight edge 195-193.00 Screw Forceps self holding 1

Cat.No.: Dia. 3.5 mm Cortex Screws Pcs.: Cat.No. : Dia. 4.0 mm Cancellous Screws short Thread Pcs.:95-127.10Ti Length 10 mm , Titanium 8 95-129.12Ti Length 12 mm / 5 mm, Titanium 695-127.12Ti Length 12 mm , Titanium 8 95-129.14Ti Length 14 mm / 5 mm, Titanium 695-127.14Ti Length 14 mm , Titanium 8 95-129.16Ti Length 16 mm / 6 mm, Titanium 695-127.16Ti Length 16 mm , Titanium 8 95-129.18Ti Length 18 mm / 7 mm, Titanium 695-127.18Ti Length 18 mm , Titanium 8 95-129.20Ti Length 20 mm / 8 mm, Titanium 695-127.20Ti Length 20 mm , Titanium 8 95-129.22Ti Length 22 mm / 9 mm, Titanium 695-127.22Ti Length 22 mm , Titanium 8 95-129.24Ti Length 24 mm / 10 mm, Titanium 695-127.24Ti Length 24 mm , Titanium 8 95-129.26Ti Length 26 mm / 12 mm, Titanium 695-127.26Ti Length 26 mm , Titanium 8 95-129.28Ti Length 28 mm / 14 mm, Titanium 695-127.28Ti Length 28 mm , Titanium 8 95-129.30Ti Length 30 mm / 14 mm, Titanium 695-127.32Ti Length 32 mm , Titanium 8 95-129.35Ti Length 35 mm / 14 mm, Titanium 695-127.36Ti Length 36 mm , Titanium 8 95-129.40Ti Length 40 mm / 14 mm, Titanium 695-127.40Ti Length 40 mm , Titanium 8 95-129.45Ti Length 45 mm / 15 mm, Titanium 695-127.45Ti Length 45 mm , Titanium 8 95-129.50Ti Length 50 mm / 15 mm, Titanium 695-127.50Ti Length 50 mm , Titanium 8 95-121.07Ti Small Washer for Dia. 3.5 mm / 4.0 mm Screws 6Cat.No. : Dia. 4.0 mm Cancellous Screws full Thread Pcs.:95-130.14Ti Length 14 mm, Titanium 6 95-121.07Ti Small T-Plate right angle 3/3 Holes Titanium 195-130.16Ti Length 16 mm, Titanium 6 95-155.04Ti Small T-Plate right angle 4/4 Holes Titanium 195-130.18Ti Length18mm,Titanium 6 95-157.03Ti SmallT-Plateobliqueangle3/3HolesTitanium 195-130.20Ti Length20mm,Titanium 6 95-157.05Ti SmallT-Plateobliqueangle5/3HolesTitanium 195-130.22Ti Length 22 mm, Titanium 6 95-130.24Ti Length 24 mm, Titanium 6 95-154.02Ti One Third Tubular Plate 2 Holes, Titanium 195-130.26Ti Length 26 mm, Titanium 6 95-154.03Ti One Third Tubular Plate 3 Holes, Titanium 195-130.28Ti Length 28 mm, Titanium 6 95-154.04Ti One Third Tubular Plate 4 Holes, Titanium 195-130.30Ti Length 30 mm, Titanium 6 95-154.05Ti One Third Tubular Plate 5 Holes, Titanium 195-130.32Ti Length 32 mm, Titanium 6 95-154.06Ti One Third Tubular Plate 6 Holes, Titanium 195-130.35Ti Length 35 mm, Titanium 6 95-154.07Ti One Third Tubular Plate 7 Holes, Titanium 195-130.40Ti Length 40 mm, Titanium 6 95-154.08Ti One Third Tubular Plate 8 Holes, Titanium 195-130.45Ti Length 45 mm, Titanium 6 95-130.50Ti Length 50 mm, Titanium 6 95-146.03Ti Cloverleaf Plate, Shaft 3 Holes, Titanium 195-130.55Ti Length 55 mm, Titanium 4 95-146.04Ti Cloverleaf Plate, Shaft 4 Holes, Titanium 195-130.60Ti Length 60 mm, Titanium 4 95-153.06Ti Small Fragment Plate 6 Holes, Titanium 2 95-153.07Ti Small Fragment Plate 7 Holes, Titanium 2 95-153.08Ti Small Fragment Plate 8 Holes, Titanium 2 95-153.09Ti Small Fragment Plate 10 Holes, Titanium 2

95-233.12Ti Kirschner Wire Dia.1.2 mm x Length 150 mm, Titanium 12 95-233.16Ti Kirschner Wire Dia.1.6 mm x Length 150 mm, Titanium 12 95-233.20Ti Kirschner Wire Dia.2.0 mm x Length 150 mm, Titanium 12

Small Fragment Instrument and Titanium Implant Setin Graphic Case

20

91-007.01 Tray for Mini Instrument and Implant Set (Steel)

60-500.10 Sterilization Container (recommended)

Listing: 91-007.00 Mini Instrument and Steel Implant Set (Steel Screws and Plates in Mat. DIN ISO 5832-1)

Mini Instrument and Steel Implant Set in Graphic Case

21

Listing: 91-007.00 Mini Instrument and Steel Implant Set (Steel Screws and Plates in Mat. DIN ISO 5832-1)

91-007.01 Tray for Mini Instrument and Implant Set (Steel)

Cat.No.: Instruments for Dia. 2.0mm / Dia. 2.7mm Screws Pcs.: Screw type used in ( Dia. mm )95-169.14 DrillBitDia.2.0mmwithquickcoupling 2 2.0mm+2.7mm95-169.16 DrillBitDia.2.7mmwithquickcoupling 2 2.7mm95-173.03 SmallCountersinkwithendtofitquickcouplingHandle 1 2.7mm95-170.03 TapDia.2.7mmwithendtofitquickcouplingHandle 2 2.7mm95-172.03 Handlewithquickcoupling 195-185.08 DrillGuideandDrillSleeveforDia.2.0mmDrillBit 1 2.0mm+2.7mm95-186.02 Tap Sleeve Dia. 3.5 mm 1 2.7 mm95-178.01 Small Hexagonal Screwdriver 2.5 mm with holding Sleeve 1 2.7 mm95-174.02 Depth Gauge ( only for 2.7 mm Screws ) 1 2.7 mm Cat.No.: Instruments for Dia. 1.5 mm / Dia. 2.0 mm Mini Screws Pcs.: Screw type used in ( Dia. mm )95-169.12 DrillBitDia.1.1mmwithquickcoupling 2 1.5mm95-169.13 DrillBitDia.1.5mmwithquickcoupling 2 2.0mm95-173.06 MiniCoutersinktofitHandlewithminiquickcoupling 1 1.5mm+2.0mm95-170.10 TapDia.1.5mmtofitHandlewithminiquickcoupling 2 1.5mm95-170.11 TapDia.2.0mmtofitHandlewithminiquickcoupling 2 2.0mm95-172.04 Handlewithminiquickcoupling 195-183.13 MiniDrillSleeveforDia.1.1andDia.1.5mmDrillBits 1 1.5mm+2.0mm95-174.03 Mini Depth Gauge ( only for 2.0 mm Screws ) 1 2.0 mm

Cat.No.: General Instruments Pcs.:95-175.00 SharpHook 195-178.02 Hexagonal Screw Driver 1.5 mm with holding Sleeve 195-190.04 Bending Iron for Finger Plates195-197.00 Holding Forceps for small Plates 195-298.00 Reduction Forceps with points 195-321.00 Small Retractor, 6 mm 195-322.00 Small Retractor, 8 mm 195-323.00 Retractorforsmallfragmentswithbroadshank,short 295-327.01 Periosteal Elevator, small with straight edge 3 mm 1

Cat.No.: Dia. 2.7 mm Cortex Screws Pcs.: Cat.No. : Dia. 1.5 mm Cortex Screws Pcs.:95-126.06 Length 6 mm , Steel 6 95-124.06 Length 6 mm , Steel 495-126.08 Length 8 mm , Steel 6 95-124.07 Length 7 mm , Steel 495-126.10 Length 10 mm , Steel 6 95-124.08 Length 8 mm , Steel 495-126.12 Length 12 mm , Steel 6 95-124.09 Length 9 mm , Steel 495-126.14 Length 14 mm , Steel 6 95-124.10 Length 10 mm , Steel 495-126.16 Length 16 mm , Steel 6 95-124.11 Length 11 mm , Steel 495-126.18 Length 18 mm , Steel 6 95-124.12 Length 12 mm , Steel 495-126.20 Length 20 mm , Steel 6 95-124.14 Length 14 mm , Steel 495-126.22 Length 22 mm , Steel 6 95-124.16 Length 16 mm , Steel 495-126.24 Length 24 mm , Steel 6 Cat.No. : Dia. 2.0 mm Cortex Screws Pcs.: 95-125.06 Length 6 mm , Steel 6 95-125.08 Length 8 mm , Steel 6 95-125.10 Length 10 mm , Steel 695-121.07 Small Washer for Dia. 2.7 mm Screws , Steel 6 95-125.12 Length 12 mm , Steel 6 95-125.14 Length 14 mm , Steel 6Cat.No.: Plates for Dia. 2.7 mm Cortex Screws Pcs.: 95-125.16 Length 16 mm , Steel 695-163.03 Quarter Tubular Plate Length 25 mm / 3 Hole , Steel 2 95-125.18 Length 18 mm , Steel 695-163.04 Quarter Tubular Plate Length 33 mm / 4 Hole , Steel 2 95-125.20 Length 20 mm , Steel 695-163.05 Quarter Tubular Plate Length 41 mm / 5 Hole , Steel 2 95-163.06 Quarter Tubular Plate Length 49 mm / 6 Hole , Steel 2 Cat.No.: Plates for Dia. 1.5 mm / 2.0 mm Cortex Screws Pcs.:95-163.07 Quarter Tubular Plate Length 57 mm / 7 Hole , Steel 2 95-164.03 Mini Plate 2.0 straight , 3 Hole / Length 17 mm , Steel 295-163.08 Quarter Tubular Plate Length 65 mm / 8 Hole , Steel 2 95-164.04 Mini Plate 2.0 straight , 4 Hole / Length 23 mm , Steel 295-160.01 L-Plate,obliqueleft3/2Hole,Steel 2 95-164.05 MiniPlate2.0straight,5Hole/Lenght29mm,Steel 295-160.02 L-Plate,obliqueright3/2Hole,Steel 2 95-166.02 MiniL-Plate2.0obliqueleft2/2Hole,Steel 295-159.00 T-Plate,Shaft3Hole/Head2Hole,Steel 4 95-166.01 MiniL-Plate2.0obliqueright2/2Hole,Steel 2 95-167.00 Mini T – Plate 2.0 , 2/2 Hole , Steel 4 Cat.No.: Kirschner Wires with Trocar Pcs.: 95-231.08 Dia. 0.8 mm / Lenght 70 mm , Steel 10 95-231.10 Dia. 1.0 mm / Lenght 70 mm , Steel 10 95-233.10 Dia. 1.0 mm / Length 150 mm , Steel 10 95-233.12 Dia. 1.2 mm / Length 150 mm , Steel 10 95-233.16 Dia. 1.6 mm / Length 150 mm , Steel 10

Mini Instrument and Steel Implant Set in Graphic Case

22

91-007.01 Tray for Mini Instrument and Implant Set (Steel)

60-500.10 Sterilization Container (recommended)

Listing: 91-007.00Ti Mini Instrument and Steel Implant Set (Titanium Screws and Plates in Mat. DIN ISO 5832-3)

Mini Instrument and Titanium Implant Set in Graphic Case

23

Listing: 91-007.00Ti Mini Instrument and Ti Implant Set (Titanium Screws and Plates in Mat. DIN ISO 5832-3)

91-007.01 Tray for Mini Instrument and Implant Set (Ti)

Cat.No.: Instruments for Dia. 2.0mm / Dia. 2.7mm Screws Pcs.: Screw type used in ( Dia. mm )95-169.14 DrillBitDia.2.0mmwithquickcoupling 2 2.0mm+2.7mm95-169.16 DrillBitDia.2.7mmwithquickcoupling 2 2.7mm95-173.03 SmallCountersinkwithendtofitquickcouplingHandle 1 2.7mm95-170.03 TapDia.2.7mmwithendtofitquickcouplingHandle 2 2.7mm95-172.03 Handlewithquickcoupling 195-185.08 DrillGuideandDrillSleeveforDia.2.0mmDrillBit 1 2.0mm+2.7mm95-186.02 Tap Sleeve Dia. 3.5 mm 1 2.7 mm95-178.01 Small Hexagonal Screwdriver 2.5 mm with holding Sleeve 1 2.7 mm95-174.02 Depth Gauge ( only for 2.7 mm Screws ) 1 2.7 mm Cat.No.: Instruments for Dia. 1.5 mm / Dia. 2.0 mm Mini Screws Pcs.: Screw type used in ( Dia. mm )95-169.12 DrillBitDia.1.1mmwithquickcoupling 2 1.5mm95-169.13 DrillBitDia.1.5mmwithquickcoupling 2 2.0mm95-173.06 MiniCoutersinktofitHandlewithminiquickcoupling 1 1.5mm+2.0mm95-170.10 TapDia.1.5mmtofitHandlewithminiquickcoupling 2 1.5mm95-170.11 TapDia.2.0mmtofitHandlewithminiquickcoupling 2 2.0mm95-172.04 Handlewithminiquickcoupling 195-183.13 MiniDrillSleeveforDia.1.1andDia.1.5mmDrillBits 1 1.5mm+2.0mm95-174.03 Mini Depth Gauge ( only for 2.0 mm Screws ) 1 2.0 mm

Cat.No.: General Instruments Pcs.:95-175.00 SharpHook 195-178.02 Hexagonal Screw Driver 1.5 mm with holding Sleeve 195-190.04 Bending Iron for Finger Plates195-197.00 Holding Forceps for small Plates 195-298.00 Reduction Forceps with points 195-321.00 Small Retractor, 6 mm 195-322.00 Small Retractor, 8 mm 195-323.00 Retractorforsmallfragmentswithbroadshank,short 295-327.01 Periosteal Elevator, small with straight edge 3 mm 1

Cat.No.: Dia. 2.7 mm Cortex Screws Pcs.: Cat.No. : Dia. 1.5 mm Cortex Screws Pcs.:95-126.06Ti Length 6 mm , Ti 6 95-124.06Ti Length 6 mm , Ti 495-126.08Ti Length 8 mm , Ti 6 95-124.07Ti Length 7 mm , Ti 495-126.10Ti Length 10 mm , Ti 6 95-124.08Ti Length 8 mm , Ti 495-126.12Ti Length 12 mm , Ti 6 95-124.09Ti Length 9 mm , Ti 495-126.14Ti Length 14 mm , Ti 6 95-124.10Ti Length 10 mm , Ti 495-126.16Ti Length 16 mm , Ti 6 95-124.11Ti Length 11 mm , Ti 495-126.18Ti Length 18 mm , Ti 6 95-124.12Ti Length 12 mm , Ti 495-126.20Ti Length 20 mm , Ti 6 95-124.14Ti Length 14 mm , Ti 495-126.22Ti Length 22 mm , Ti 6 95-124.16Ti Length 16 mm , Ti 495-126.24Ti Length 24 mm , Ti 6 Cat.No. : Dia. 2.0 mm Cortex Screws Pcs.: 95-125.06Ti Length 6 mm , Ti 6 95-125.08Ti Length 8 mm , Ti 6 95-125.10Ti Length 10 mm , Ti 695-121.07Ti Small Washer for Dia. 2.7 mm Screws , Ti 6 95-125.12Ti Length 12 mm , Ti 6 95-125.14Ti Length 14 mm , Ti 6Cat.No.: Plates for Dia. 2.7 mm Cortex Screws Pcs.: 95-125.16Ti Length 16 mm , Ti 695-163.03Ti Quarter Tubular Plate Length 25 mm / 3 Hole , Ti 2 95-125.18Ti Length 18 mm , Ti 695-163.04Ti Quarter Tubular Plate Length 33 mm / 4 Hole , Ti 2 95-125.20Ti Length 20 mm , Ti 695-163.05Ti Quarter Tubular Plate Length 41 mm / 5 Hole , Ti 2 95-163.06Ti Quarter Tubular Plate Length 49 mm / 6 Hole , Ti 2 Cat.No.: Plates for Dia. 1.5 mm / 2.0 mm Cortex Screws Pcs.:95-163.07Ti Quarter Tubular Plate Length 57 mm / 7 Hole , Ti 2 95-164.03Ti Mini Plate 2.0 straight , 3 Hole / Length 17 mm , Ti 295-163.08Ti Quarter Tubular Plate Length 65 mm / 8 Hole , Ti 2 95-164.04Ti Mini Plate 2.0 straight , 4 Hole / Length 23 mm , Ti 295-160.01Ti L-Plate,obliqueleft3/2Hole,Ti 2 95-164.05Ti MiniPlate2.0straight,5Hole/Lenght29mm,Ti 295-160.02Ti L-Plate,obliqueright3/2Hole,Ti 2 95-166.02Ti MiniL-Plate2.0obliqueleft2/2Hole,Ti 295-159.00Ti T-Plate,Shaft3Hole/Head2Hole,Ti 4 95-166.01Ti MiniL-Plate2.0obliqueright2/2Hole,Ti 2 95-167.00Ti Mini T – Plate 2.0 , 2/2 Hole , Ti 4 Cat.No.: Kirschner Wires with Trocar Pcs.: 95-231.08Ti Dia. 0.8 mm / Lenght 70 mm , Ti 10 95-231.10Ti Dia. 1.0 mm / Lenght 70 mm , Ti 10 95-233.10Ti Dia. 1.0 mm / Length 150 mm , Ti 10 95-233.12Ti Dia. 1.2 mm / Length 150 mm , Ti 10 95-233.16Ti Dia. 1.6 mm / Length 150 mm , Ti 10

Mini Instrument and Titanium Implant Set in Graphic Case

24

60-500.10 Sterilization Container(recommended)

91-010.01 Tray for Elastic Gliding Nails (empty)

Listing: 91-010.00 Implant Set for Intramedullary Gliding Nails(Steel and Titanium Gliding Nail Set)

Implant Set for Intramedullary Gliding Nails

25

Listing: 91-010.00 Implant Set for Intramedullary Gliding Nails(Steel and Titanium Gliding Nail Set)

91-010.01 Tray (empty)

Steel Intramedullary Gliding Nail Implants ( Stainless Steel DIN ISO 5832-1 )

91-010.20 Dia. 1,5 mm x Length 150 mm 4 Pcs.91-010.21 Dia. 1,5 mm x Length 400 mm 4 Pcs.91-010.22 Dia. 2,0 mm x Length 200 mm 4 Pcs.91-010.23 Dia. 2,0 mm x Length 400 mm 4 Pcs.91-010.24 Dia. 2,5 mm x Length 250 mm 4 Pcs.91-010.25 Dia. 2,5 mm x Length 400 mm 4 Pcs.91-010.26 Dia. 3,0 mm x Length 300 mm 4 Pcs.91-010.27 Dia. 3,0 mm x Length 400 mm 4 Pcs.91-010.28 Dia. 3,5 mm x Length 350 mm 4 Pcs.91-010.29 Dia. 3,5 mm x Length 400 mm 4 Pcs.

Titanium Intramedullary Gliding Nail Implants ( Titanium DIN ISO 5832-3 )

91-010.30 Dia. 2,0 mm x Length 450 mm Colour Coding Green 4 Pcs.91-010.31 Dia.2,5mmxLength450mmColourCodingPink 4Pcs.91-010.32 Dia. 3,0 mm x Length 450 mm Colour Coding Gold 4 Pcs.91-010.33 Dia. 3,5 mm x Length 450 mm Colour Coding Blue 4 Pcs.91-010.34 Dia. 4,0 mm x Length 450 mm Colour Coding Violet 4 Pcs.91-010.35 Dia. 4,5 mm x Length 450 mm Colour Coding Gray 4 Pcs.91-010.36 Dia. 5,0 mm x Length 450 mm Colour Coding Silver 4 Pcs.

Implant Set for Intramedullary Gliding Nails

26

60-500.10 Sterilization Container(recommended)

91-008.01 Tray for Tubular Fixator System (empty)

Listing: 91-088.00 GraficCaseStandardSetExternalFixateur(TubularSystem)

StandardSetExternalFixateur(TubularSystem)in Graphic Case

27

Listing: 91008.00 GraficCaseStandardSetExternalFixateur(TubularSystem)

91-008.01 Tray (empty)

Cat.No. Pcs. :95-169.20 Drill Bit Ø 3.5 mm , extra long 295-106.00 CombinationWrenchwithacrossflats11mm 195-268.00 Simple T-Handle for Steinmann Pins and Schanz Screws Ø5.0 mm 195-267.00 SocketWrenchwithacrossflats11mm180mmlongforthreadetconicalBoltsandExternalFixateur 195-178.03 HexagonalAllenKeywithacrossflats3.5mm 195-266.02 Trocar with point Ø 3.5 mm short 195-185.15 Drill Sleeve Ø 5.0 mm / Ø 3.5 mm short 195-185.16 Drill Sleeve Ø 6.0 mm / Ø 5.0 mm short 195-266.01 Trocar with point for Aiming Device Ø 3.5 mm long 195-185.01 Drill Sleeve Ø 5.0 mm / Ø 3.5 mm long 195-185.12 Drill Sleeve Ø 6.0 mm / Ø 5.0 mm long 1

Cat.No. Fixateur Components Pcs. :95-269.00 Open Compressor 295-272.01 Tube Rod Ø 11 mm , 100 mm Length ( Steel ) 195-272.02 Tube Rod Ø 11 mm , 125 mm Length ( Steel ) 195-272.03 Tube Rod Ø 11 mm , 150 mm Lenght ( Steel ) 295-272.04 Tube Rod Ø 11 mm , 200 mm Length ( Steel ) 295-275.05 Tube Rod Ø 11 mm , 250 mm Lenght ( Steel ) 295-275.06 Tube Rod Ø 11 mm , 300 mm Length ( Steel ) 295-275.07 Tube Rod Ø 11 mm , 350 mm Length ( Steel ) 295-275.08 Tube Rod Ø 11 mm , 400 mm Length ( Steel ) 295-273.00 Plug for Tube Rods 1095-274.00 Open adjustable Clamp 1295-275.10 Ø 11 mm Tube-to Tube Clamp 2

Schanz Screws Ø 5.0 mm , Thread - Length 50 mm ( with Trocar Point and Triangular Shaft )( Steel Implants DIN ISO 5832-1 )Cat.No. Pcs. :95-228.02 Ø 5.0 mm , Length 125 mm 695-228.03 Ø 5.0 mm , Length 150 mm 695-228.04 Ø 5.0 mm , Length 170 mm 695-228.05 Ø 5.0 mm , Length 200 mm 6

StandardSetExternalFixateur(TubularSystem)in Graphic Case

Ortho-Medical GmbH Hauptstrasse 5 78589 Dürbheim GermanyTelefon +49 (74 24)94 03-40 mail@orthomedical.de www.orthomedical.de

Edition 2018/11 | Revision: 19.11.2018