PRICE LIST (SPD-16.6)SPDOORS.COM.AU

IMPORTANT INFORMATIONUSING THE PRICELISTPLEASE NOTE: It is the Customer responsibility to select the products required. It is assumed that all customers are aware of the requirement of AS1905.1 and AS1530.4 and products are selected based on the technical information found in the E-Core® ‘Fire Door Handbook’.

PLACING ORDERSAll orders should be placed through the OLOS ordering system (see link at www.spdoors.com.au). If you require a log-in please contact the Sales Desk on 02 9905 8222 or 1300 43 66 77 (1300 4 DOORS)Customers are reminded that it is their responsibility to ensure all details are correct when orders are placed.FSE Special Purpose Doors:

• Cannot accept responsibility for positioning of various accessories, options or reinforcements to door panels unless clearly stipulated when placing the order. Customers are encouraged to utilise the OLOS system to minimise errors, and expedite deliveries.

• Reserves the right to reject any orders that do not meet Australian Standards or Building Codes, or where it is deemed that the doors are structurally unsound or may not be fit for purpose.

It is important that you ensure your orders are accurate before placing them with FSE. Please note that orders that are:

• Changed within 24 hours of being confirmed will incur a 15% rescheduling fee• Changed after 24 hours of being confirmed will incur a 35% rescheduling fee• Orders changed or cancelled 48 hours prior to the confirmed delivery date will be charged accordingly

PRICING POLICYPrices are subject to change without notice and FSE Special Purpose Doors:

• Is not obligated to furnish reasons for any changes in pricing• All price changes are at the Company’s absolute discretion• Will honour pricing on orders received prior to the date of notification

DOOR SIZESIn this pricelist, the door size is an “up to” door size. If your requirement is above the nominated standard size, please use the next largest size. For example if your door size is 2045x825 please use the 2100x920 pricing.

DOOR FINISHESDoors are finished in MDF, Pre-Primed Tempered Hardboard or Plywood veneer (paint or selected timbers). It is imperative that the surfaces of the door are prepared and painted in accordance with the finish.

For example, any paint grade veneer will require filing and sanding to achieve the required final finish. FSE Special Purpose Doors will not be held responsible for any painting, filling or finishing.

Due to the nature of M.D.F, it is recommended, when painting, to use an acrylic (water based) undercoat / sealer, followed by two coats, minimum, of enamel gloss. Solvent based sealer coats have been known at times to activate the wax in the board causing dull patching.

Tempered Hardboard’ will be pre-prime-coated. Any raw door edging (eg external timber edge strips) will still require pre-prime regiments (prior to full and proper painting / sealing, to all surfaces and edges) to maintain integrity and compliance with AS1909 – Section 9.2; for installation of timber door sets.

COSTING PAIRSWhen costing pairs of fire doors, please include meeting stiles and additional reinforcing plates (see example below):

1off 2100x2000 equal leaf pair 2 hour fire doors paint grade finish T-Bar meeting stiles:2off 2100x1000 Maxi 2hr PG FDC1702P2 $479.00 $958.001off Additional Plate Preparation PRE2950 $34.00 $34.001off 2135mm T-Bar Meeting Stiles MST0860 $161.00 $161.00 Sub-Total $1,153.00 GST @ 10% $115.30 Total $1,268.30

INCLUDED OPTIONSPlease note the following options are included in the prices quoted:

• 2 Way Swing (Double Action): Includes additional reinforcing plates and 1 set of Bull Nose meeting stiles per leaf. (Supplied loose).

ADDITIONAL REINFORCEMENTSIf additional reinforcement plates are required for various hardware or additional hinges etc., you will be required to provide the exact plate position when placing your order. A sketch must be provided to ensure accurate placement.

STANDARD FIRE DOOR SALESTo help support our customers major project requirements and provide consistent customer service FSE Special Purpose Doors have introduced our ‘Project registration’ initiative.

The aim is to support our customers with Project rates and consistent guaranteed supply. (Subject to agreed time period).

FSE will work with you to ensure the doors are manufactured in advance ready for your Project needs.

The benefits to you:• Competitive rates• Supply of doors ready to call off to best suit your project needs

The benefits to FSE:• Advanced knowledge of project requirements.• Economy of scale manufacturing.

All projects will need a minimum of 30 doors (all the same size) for each order to receive standard size project rates.

TERMS & CONDITIONS OF SALE AND MANUFACTURER’S GUARANTEEPlease visit our website www.spdoors.com.au to download the following:

• FSE Special Purpose Doors terms and conditions of sale• FSE Special Purpose Doors Manufacturer’s guarantee• FSE Special Purpose Doors OLOS terms and conditions of use

PACKING AND DELIVERYFSE Special Purpose Doors can deliver to anywhere in Australia and New Zealand.Please note:

• Prices exclude GST• Delivery charges are for drop off within a 5 metre radius of the delivery vehicle.• It is the customer’s responsibility to provide all labour, craning and hoisting as necessary to unload.• Our drivers will not physically lift off, carry or place doors to instruction as this is the customer’s responsibility.• It is the customer’s responsibility to move doors to their final location.

Delivery per drop to Sydney CBD$95

DELOUT1

Delivery per drop to Sydney Metropolitan (bounded by Penrith, Wollongong, Gosford)$300

DELOUT2

Delivery per drop to Sydney Outer (bounded by Newcastle, Bathurst, Nowra)$450

DELOUT3

Waiting time per hour (if driver is delayed by more than 15 minutes) minimum 1 hour charge$190MISC

Interstate DeliveriesPOA

DELOUT4

Packing & Materials (Standard Doors) per pallet (max 25 doors/pallet)$35

PACK001

Packing & Materials (Sliding Fire Doors)POA

PACK002

PLACEMENT OF VISION PANELS AND AIR GRILLESIf vision panels, air grilles or any other cut-out is required, a sketch must be provided to ensure accurate placement at the time of placing the order. The OLOS system caters for this requirement.

FSC (FOREST STEWARDSHIP COUNCIL) ACCREDITATIONFSE holds FSC certification and is able to supply products as required. To ensure proper adherence to certification requirements it is imperative that any FSC orders are clearly specified “mixed” or “pure” and other pertinent requirements. It is imperative that any FSC requirements are requested at the time of placing orders.

TAGGING & CERTIFICATION OF FIRE DOOR SETSIt is the client’s responsibility to tag and certify the finished fire door installation. However, FSE can provide this service at an additional cost if required. Please notify us when placing your order.Please note:

• When certifying a fire rated doorset you must use a suitably qualified practitioner in the field of certifying fire doorsets.• The certification of the fire doorset must be carried out as per AS1905.1 and other standards referenced in its content.• The complete doorset, frame, door and hardware must follow the E-Core® designs as set out in the ‘Fire Door Hand

Book’.FSE Special Purpose Doors reserves the right to withdraw its support for a doorset if the above has not been carried out correctly and the doorset is in breach of the E-Core® ‘Fire Door Handbook’, the testing and certification standards.

TECHNICAL INFORMATIONDOOR HANDINGPlease ensure you provide the handing when require to avoid any delays in production. In many cases it is critical that the handing of the door is known to facilitate correct preparation during manufacturing. This is critical for correct placement of bolection moulds, bottom seals cut outs etc. FSE Special Purpose Doors uses the following industry standard method of door handing:

VISION PANEL AND AIRE GRILLE LOCATION DRAWINGSTo ensure accurate placement of vision panels and air grilles – please ensure these drawings are supplied with every order.Copies are available from our website www.spdoors.com.au

OVERSIZED DOORSRates for oversized doors have been included for customer convenience. However the doors can not come with a full warranty. FSE Special Purpose Doors can not offer a full warranty for any door size outside of the Australian standard.If a more stable door is required FSE special Purpose Doors can offer steel internal subframes to solid core doors at additional cost.

GRILLE POSITION FORM VISION PANEL POSITION FORM MEETING STILE DETAILS

FIRE RATED MEETING STILE SELECTION CHART(Please tick box of your selection)

oT-Bar

Aluminium(Natural Anodised)

Supplied as Standard

oBull-Nose

Aluminium(Natural Anodised)

oRebatedTimber

(c/w seals)

StandardConsistent

Height2040mm

or2045mm

Standard Widths820mm or 920mm

A Standard Fire Door

354 Horsley Road, Milperra, NSW 2214 T 1300 4 DOORS F +61 2 9905 8333 E info@spdoors.com.au W spdoors.com.au

OPTIONS + ACCESSORIES^^ Gross Prices. Only applicable when ordered with the door – these are not parts prices

OPTIONS + ACCESSORIES^^ Gross Prices. Only applicable when ordered with the door – these are not parts prices

Type Sizes (Up to)Sheeting 0.9mm

Con

figur

atio

n

Paint Grade MDF

Paint Grade

Ply

Pre - Primed

THB

Paint Grade MDF

Paint Grade

Ply

Pre - Primed

THB

Paint Grade MDF

Paint Grade Ply

Pre - Primed

THB

Paint Grade MDF

Paint Grade Ply

Tas Oak 2 sides

Meranti 2 sides

Screw fixed ZA or Gal steel

( 1 Face) ZA or Gal steel

(2 Faces) Colorbond (2 Faces)

Stainless Steel 304 No 4 Finish

(2 Faces)

Factory Fitted

Capping (Mitred)

PB 2045 x 820 S 135 167 167 152 171 171 180 209 209 293 378 85 62 176 347 516 1125 70

PB 2100 x 920 S 152 182 182 172 187 187 202 229 229 328 415 85 62 176 347 516 1125 70

PB 2100 x 1200 S 188 235 235 216 242 242 248 317 317 402 600 85 62 204 402 533 1143 70

PB 2400 x 920 S 165 211 211 188 217 217 227 268 268 374 498 93 70 188 373 516 1125 70

PB 2400 x 1200 S 216 264 264 248 272 272 288 337 337 470 610 93 70 235 456 533 1143 70

PB 2700 x 920 S 217 320 320 246 328 328 290 372 372 487 702 124 93 248 478 POA POA 70

PB 2700 x 1200 S 256 375 375 293 386 386 353 438 438 514 720 124 93 259 498 POA POA 70

PB 3000 x 1200 S 511 527 527 548 572 572 657 765 154 124 281 515 POA POA 70

PB 3000 x 1500 S POA POA POA POA POA POA 154 124 POA POA

PB 3500 x 1200 S 513 598 761 816 901 928 154 124 POA POA

LVL 2045 x 820 S 177 209 209 194 221 221 236 272 272 85 62 176 347 516 1125 70

LVL 2100 x 920 S 197 225 225 216 240 240 260 293 293 85 62 176 347 516 1125 70

LVL 2100 x 1200 S 230 282 282 255 301 301 301 362 362 85 62 204 402 533 1143 70

LVL 2400 x 920 S 223 259 259 245 275 275 290 332 332 93 70 188 373 516 1125 70

LVL 2400 x 1200 S 267 322 322 296 344 344 343 409 409 93 70 235 456 533 1143 70

35mm 40mm 45mm 50mm Optional Edge Strips Sheeting 0.9mm (Including capping - supplied

loose)

This document is the property of R.E. Spence and Co. Pty Ltd trading as FSE Special Purpose Doors and may not be copied , used or disclosed in whole or in part except with the written permission of R.E Spence and Co Pty Ltd. The Copyright and forgoing restriction on coping, use and disclosure extend to all media in which this information may be contained or used. No liability is accepted for errors or omissions in this document.

PRICE LIST (SPD-16.6) PRICE LIST (SPD-16.6)

3HR 4HR X-ray

Type H X W Con

figur

atio

n

Paint Grade MDF

Paint Grade

Ply

Pre - Primed

THB

Paint Grade

Ply

Pre - Primed

THB

Paint Grade

Ply

Paint Grade

Ply

ZA or Gal steel

(2 Faces) Colorbond

(2 Faces)

Stainless Steel 304 No 4 Finish

(2 Faces)

Factory Fitted

Capping (Mitred)

Tas Oak 2 sides

Meranti 2 sides

Steel Lining Rw35

2hr only

Lead Lining Rw39

2hr only

Radiation Shielding 2hr only Type

Rectangular Fire Rated

(Steel Surround)

Rectangular Fire Rated

(Aluminium Surround)

Insulated Glass

Radiation Shielded

E/O for fitting to steel sheeted

Mini 293 POA 85Mini 2040 x 820 S 232 263 263 293 263 Maxi 293 347 POA 1619 85Mini 2040 x 920 S 270 293 293 323 293 2 Way 293 347 85Maxi 2040 x 820 S 258 277 277 308 277 View panel Sizes 300 x 200 / 450 x 120 / 600 x 100Maxi 2040 x 920 S 283 309 309 339 309

Sizes (Up to)Mini 2045 x 820 S 281 298 298 329 298 347 516 1125 70 124 93Mini 2100 x 920 S 315 336 336 367 336 347 516 1125 70 124 93Mini 2100 x 1200 S 385 418 418 449 418 402 533 1143 70 124 93Mini 2350 x 920 S 358 387 387 418 387 373 516 1125 70 124 93Mini 2350 x 1200 S 416 464 464 495 464 456 533 1143 70 124 93Maxi 2045 x 820 S 304 321 321 352 321 422 457 347 516 1125 70 124 93 347 1,105 1,105 Mini 17 39 39 85 47Maxi 2100 x 920 S 327 349 349 379 349 455 493 347 516 1125 70 124 93 347 1,105 1,105 Maxi 17 39 39 85 47Maxi 2100 x 1200 S 409 449 449 479 449 575 624 402 533 1143 70 124 93 402 1,386 1,386 2 Way 39Maxi 2400 x 920 S 385 413 413 444 413 533 577 373 516 1125 70 124 93 373 1,236 1,236 Other preperations POAMaxi 2400 x 1200 S 462 501 501 532 501 638 691 456 533 1143 70 124 93 456 1,556 1,556Maxi 2700 x 920 S 621 621 652 621 782 847 478 POA POA 70 124 93 478 1,348 1,348Maxi 2700 x 1200 S 686 686 717 686 860 931 498 POA POA 70 124 93 498 1,738 1,738Maxi 3000 x 1200 S 781 781 812 781 974 1056 515 POA POA 70 124 93 515 POA POAMaxi 3000 x 1500 S 1402 1402 1433 1402 1719 1862 POA POA POA POA Maxi T-Bar 161 201 268 409Maxi 3500 x 1200 S 1331 1331 1362 1331 1634 1770 POA POA POA POA Maxi Bull Nose 218 272 345 566Maxi 2100 x 1840 P Maxi P Maxi 2400 x 1840 P Maxi P Maxi 2700 x 1840 P Maxi P Maxi 3000 x 2400 P Maxi P Maxi 3500 x 2400 P

2 Way 2045 x 820 S 855 886 347 516 11252 Way 2100 x 920 S 864 895 347 516 1125 Mini 39 39 116 POA 2312 Way 2100 x 1200 S 985 1015 402 533 1143 Maxi 39 39 116 POA 2312 Way 2400 x 920 S 937 968 373 516 1125 2 Way 39 39 POA 2312 Way 2400 x 1200 S 1088 1119 456 533 11432 Way 2700 x 920 S 1189 1220 478 POA POA2 Way 2700 x 1200 S 1263 1294 498 POA POA2 Way 2045 x 1640 P 1710 1771 694 1032 22502 Way 2100 x 1840 P 1728 1790 694 1032 22502 Way 2100 x 2400 P 1969 2030 804 1066 22862 Way 2400 x 1840 P 1873 1935 746 1032 22502 Way 2400 x 2400 P 2175 2237 912 1066 2286 Mini N/A 609 609 201 442 Way 2700 x 1840 P 2378 2440 956 POA POA Maxi N/A 609 609 201 442 Way 2700 x 2400 P 2526 2588 996 POA POA 2 Way N/A 609 609 201 44

Configuration S= Single P= Pair 1HR 2HR Sheeting 0.9mm (Including capping - supplied loose) Optional Edge

Strips Vision Panels

Standard Sizes Only* (condition apply)

Acoustic

Preparations ( Per Prep Per Leaf)

Type Additional

Hinge Plates

Panic Bar Reinforcing Magnetic

Reinforcing

All Bottom Door/ Drop

Seals Continuous hinge prep

Preperation for power

transfer cable

Meeting Stiles cost (add to Maxi Pairs)

Type Type Upto 2100mm upto

2400mm upto 3000mm upto 3500mm

Maxi Lead Lined

T- Bar 238 301 392 578

Prime FSC Prep Special Faces

Acrylic Undercoat (per

leaf) FSC Approved CoC (per leaf)

out of Square door (per Up to

Leaf)

Decorative Veneers or Laminates

Bolection Moulding (per

face)Type

Intumescent Air Grilles Supply & Install

Type

600 x 600 not approved with

E-Core 450 x 450 300 x 600

E/O for fitting to steel sheeted

Cutout in door only

All prices exclude GST All prices exclude GST

Type Sizes (Up to)Sheeting 0.9mm

Con

figur

atio

n

Paint Grade MDF

Paint Grade

Ply

Pre - Primed

THB

Paint Grade MDF

Paint Grade

Ply

Pre - Primed

THB

Paint Grade MDF

Paint Grade Ply

Pre - Primed

THB

Paint Grade MDF

Paint Grade Ply

Tas Oak 2 sides

Meranti 2 sides

Screw fixed ZA or Gal steel

( 1 Face) ZA or Gal steel

(2 Faces) Colorbond (2 Faces)

Stainless Steel 304 No 4 Finish

(2 Faces)

Factory Fitted

Capping (Mitred)

PB 2045 x 820 S 135 167 167 152 171 171 180 209 209 293 378 85 62 176 347 516 1125 70

PB 2100 x 920 S 152 182 182 172 187 187 202 229 229 328 415 85 62 176 347 516 1125 70

PB 2100 x 1200 S 188 235 235 216 242 242 248 317 317 402 600 85 62 204 402 533 1143 70

PB 2400 x 920 S 165 211 211 188 217 217 227 268 268 374 498 93 70 188 373 516 1125 70

PB 2400 x 1200 S 216 264 264 248 272 272 288 337 337 470 610 93 70 235 456 533 1143 70

PB 2700 x 920 S 217 320 320 246 328 328 290 372 372 487 702 124 93 248 478 POA POA 70

PB 2700 x 1200 S 256 375 375 293 386 386 353 438 438 514 720 124 93 259 498 POA POA 70

PB 3000 x 1200 S 511 527 527 548 572 572 657 765 154 124 281 515 POA POA 70

PB 3000 x 1500 S POA POA POA POA POA POA 154 124 POA POA

PB 3500 x 1200 S 513 598 761 816 901 928 154 124 POA POA

LVL 2045 x 820 S 177 209 209 194 221 221 236 272 272 85 62 176 347 516 1125 70

LVL 2100 x 920 S 197 225 225 216 240 240 260 293 293 85 62 176 347 516 1125 70

LVL 2100 x 1200 S 230 282 282 255 301 301 301 362 362 85 62 204 402 533 1143 70

LVL 2400 x 920 S 223 259 259 245 275 275 290 332 332 93 70 188 373 516 1125 70

LVL 2400 x 1200 S 267 322 322 296 344 344 343 409 409 93 70 235 456 533 1143 70

35mm 40mm 45mm 50mm Optional Edge Strips Sheeting 0.9mm (Including capping - supplied

loose)

Refer to E-Core® Fire Door Handbook for correct application ®

Small VP Qtr Glass

6.38mm Clear Laminated Glass

Up to 0.25m2

6.38mm Clear Laminated Glass

>0.25m2 but 0.55m2 but

OPTIONS + ACCESSORIES^^ Gross Prices. Only applicable when ordered with the door – these are not parts prices

OPTIONS + ACCESSORIES^^ Gross Prices. Only applicable when ordered with the door – these are not parts prices

Type Sizes (Up to)Sheeting 0.9mm

Con

figur

atio

n

Paint Grade MDF

Paint Grade

Ply

Pre - Primed

THB

Paint Grade MDF

Paint Grade

Ply

Pre - Primed

THB

Paint Grade MDF

Paint Grade Ply

Pre - Primed

THB

Paint Grade MDF

Paint Grade Ply

Tas Oak 2 sides

Meranti 2 sides

Screw fixed ZA or Gal steel

( 1 Face) ZA or Gal steel

(2 Faces) Colorbond (2 Faces)

Stainless Steel 304 No 4 Finish

(2 Faces)

Factory Fitted

Capping (Mitred)

PB 2045 x 820 S 135 167 167 152 171 171 180 209 209 293 378 85 62 176 347 516 1125 70

PB 2100 x 920 S 152 182 182 172 187 187 202 229 229 328 415 85 62 176 347 516 1125 70

PB 2100 x 1200 S 188 235 235 216 242 242 248 317 317 402 600 85 62 204 402 533 1143 70

PB 2400 x 920 S 165 211 211 188 217 217 227 268 268 374 498 93 70 188 373 516 1125 70

PB 2400 x 1200 S 216 264 264 248 272 272 288 337 337 470 610 93 70 235 456 533 1143 70

PB 2700 x 920 S 217 320 320 246 328 328 290 372 372 487 702 124 93 248 478 POA POA 70

PB 2700 x 1200 S 256 375 375 293 386 386 353 438 438 514 720 124 93 259 498 POA POA 70

PB 3000 x 1200 S 511 527 527 548 572 572 657 765 154 124 281 515 POA POA 70

PB 3000 x 1500 S POA POA POA POA POA POA 154 124 POA POA

PB 3500 x 1200 S 513 598 761 816 901 928 154 124 POA POA

LVL 2045 x 820 S 177 209 209 194 221 221 236 272 272 85 62 176 347 516 1125 70

LVL 2100 x 920 S 197 225 225 216 240 240 260 293 293 85 62 176 347 516 1125 70

LVL 2100 x 1200 S 230 282 282 255 301 301 301 362 362 85 62 204 402 533 1143 70

LVL 2400 x 920 S 223 259 259 245 275 275 290 332 332 93 70 188 373 516 1125 70

LVL 2400 x 1200 S 267 322 322 296 344 344 343 409 409 93 70 235 456 533 1143 70

35mm 40mm 45mm 50mm Optional Edge Strips Sheeting 0.9mm (Including capping - supplied

loose)

This document is the property of R.E. Spence and Co. Pty Ltd trading as FSE Special Purpose Doors and may not be copied , used or disclosed in whole or in part except with the written permission of R.E Spence and Co Pty Ltd. The Copyright and forgoing restriction on coping, use and disclosure extend to all media in which this information may be contained or used. No liability is accepted for errors or omissions in this document.

PRICE LIST (SPD-16.6) PRICE LIST (SPD-16.6)

3HR 4HR X-ray

Type H X W Con

figur

atio

n Paint Grade MDF

Paint Grade

Ply

Pre - Primed

THB

Paint Grade

Ply

Pre - Primed

THB

Paint Grade

Ply

Paint Grade

Ply

ZA or Gal steel

(2 Faces) Colorbond

(2 Faces)

Stainless Steel 304 No 4 Finish

(2 Faces)

Factory Fitted

Capping (Mitred)

Tas Oak 2 sides

Meranti 2 sides

Steel Lining Rw35

2hr only

Lead Lining Rw39

2hr only

Radiation Shielding 2hr only Type

Rectangular Fire Rated

(Steel Surround)

Rectangular Fire Rated

(Aluminium Surround)

Insulated Glass

Radiation Shielded

E/O for fitting to steel sheeted

Mini 293 POA 85Mini 2040 x 820 S 232 263 263 293 263 Maxi 293 347 POA 1619 85Mini 2040 x 920 S 270 293 293 323 293 2 Way 293 347 85Maxi 2040 x 820 S 258 277 277 308 277 View panel Sizes 300 x 200 / 450 x 120 / 600 x 100Maxi 2040 x 920 S 283 309 309 339 309

Sizes (Up to)Mini 2045 x 820 S 281 298 298 329 298 347 516 1125 70 124 93Mini 2100 x 920 S 315 336 336 367 336 347 516 1125 70 124 93Mini 2100 x 1200 S 385 418 418 449 418 402 533 1143 70 124 93Mini 2350 x 920 S 358 387 387 418 387 373 516 1125 70 124 93Mini 2350 x 1200 S 416 464 464 495 464 456 533 1143 70 124 93Maxi 2045 x 820 S 304 321 321 352 321 422 457 347 516 1125 70 124 93 347 1,105 1,105 Mini 17 39 39 85 47Maxi 2100 x 920 S 327 349 349 379 349 455 493 347 516 1125 70 124 93 347 1,105 1,105 Maxi 17 39 39 85 47Maxi 2100 x 1200 S 409 449 449 479 449 575 624 402 533 1143 70 124 93 402 1,386 1,386 2 Way 39Maxi 2400 x 920 S 385 413 413 444 413 533 577 373 516 1125 70 124 93 373 1,236 1,236 Other preperations POAMaxi 2400 x 1200 S 462 501 501 532 501 638 691 456 533 1143 70 124 93 456 1,556 1,556Maxi 2700 x 920 S 621 621 652 621 782 847 478 POA POA 70 124 93 478 1,348 1,348Maxi 2700 x 1200 S 686 686 717 686 860 931 498 POA POA 70 124 93 498 1,738 1,738Maxi 3000 x 1200 S 781 781 812 781 974 1056 515 POA POA 70 124 93 515 POA POAMaxi 3000 x 1500 S 1402 1402 1433 1402 1719 1862 POA POA POA POA Maxi T-Bar 161 201 268 409Maxi 3500 x 1200 S 1331 1331 1362 1331 1634 1770 POA POA POA POA Maxi Bull Nose 218 272 345 566Maxi 2100 x 1840 P Maxi P Maxi 2400 x 1840 P Maxi P Maxi 2700 x 1840 P Maxi P Maxi 3000 x 2400 P Maxi P Maxi 3500 x 2400 P

2 Way 2045 x 820 S 855 886 347 516 11252 Way 2100 x 920 S 864 895 347 516 1125 Mini 39 39 116 POA 2312 Way 2100 x 1200 S 985 1015 402 533 1143 Maxi 39 39 116 POA 2312 Way 2400 x 920 S 937 968 373 516 1125 2 Way 39 39 POA 2312 Way 2400 x 1200 S 1088 1119 456 533 11432 Way 2700 x 920 S 1189 1220 478 POA POA2 Way 2700 x 1200 S 1263 1294 498 POA POA2 Way 2045 x 1640 P 1710 1771 694 1032 22502 Way 2100 x 1840 P 1728 1790 694 1032 22502 Way 2100 x 2400 P 1969 2030 804 1066 22862 Way 2400 x 1840 P 1873 1935 746 1032 22502 Way 2400 x 2400 P 2175 2237 912 1066 2286 Mini N/A 609 609 201 442 Way 2700 x 1840 P 2378 2440 956 POA POA Maxi N/A 609 609 201 442 Way 2700 x 2400 P 2526 2588 996 POA POA 2 Way N/A 609 609 201 44

Configuration S= Single P= Pair 1HR 2HR Sheeting 0.9mm (Including capping - supplied loose) Optional Edge

Strips Vision Panels

Standard Sizes Only* (condition apply)

Acoustic

Preparations ( Per Prep Per Leaf)

Type Additional

Hinge Plates

Panic Bar Reinforcing Magnetic

Reinforcing

All Bottom Door/ Drop

Seals Continuous hinge prep

Preperation for power

transfer cable

Meeting Stiles cost (add to Maxi Pairs)

Type Type Upto 2100mm upto

2400mm upto 3000mm upto 3500mm

Maxi Lead Lined

T- Bar 238 301 392 578

Prime FSC Prep Special Faces

Acrylic Undercoat (per

leaf) FSC Approved CoC (per leaf)

out of Square door (per Up to

Leaf)

Decorative Veneers or Laminates

Bolection Moulding (per

face)Type

Intumescent Air Grilles Supply & Install

Type

600 x 600 not approved with

E-Core 450 x 450 300 x 600

E/O for fitting to steel sheeted

Cutout in door only

All prices exclude GST All prices exclude GST

Type Sizes (Up to)Sheeting 0.9mm

Con

figur

atio

n

Paint Grade MDF

Paint Grade

Ply

Pre - Primed

THB

Paint Grade MDF

Paint Grade

Ply

Pre - Primed

THB

Paint Grade MDF

Paint Grade Ply

Pre - Primed

THB

Paint Grade MDF

Paint Grade Ply

Tas Oak 2 sides

Meranti 2 sides

Screw fixed ZA or Gal steel

( 1 Face) ZA or Gal steel

(2 Faces) Colorbond (2 Faces)

Stainless Steel 304 No 4 Finish

(2 Faces)

Factory Fitted

Capping (Mitred)

PB 2045 x 820 S 135 167 167 152 171 171 180 209 209 293 378 85 62 176 347 516 1125 70

PB 2100 x 920 S 152 182 182 172 187 187 202 229 229 328 415 85 62 176 347 516 1125 70

PB 2100 x 1200 S 188 235 235 216 242 242 248 317 317 402 600 85 62 204 402 533 1143 70

PB 2400 x 920 S 165 211 211 188 217 217 227 268 268 374 498 93 70 188 373 516 1125 70

PB 2400 x 1200 S 216 264 264 248 272 272 288 337 337 470 610 93 70 235 456 533 1143 70

PB 2700 x 920 S 217 320 320 246 328 328 290 372 372 487 702 124 93 248 478 POA POA 70

PB 2700 x 1200 S 256 375 375 293 386 386 353 438 438 514 720 124 93 259 498 POA POA 70

PB 3000 x 1200 S 511 527 527 548 572 572 657 765 154 124 281 515 POA POA 70

PB 3000 x 1500 S POA POA POA POA POA POA 154 124 POA POA

PB 3500 x 1200 S 513 598 761 816 901 928 154 124 POA POA

LVL 2045 x 820 S 177 209 209 194 221 221 236 272 272 85 62 176 347 516 1125 70

LVL 2100 x 920 S 197 225 225 216 240 240 260 293 293 85 62 176 347 516 1125 70

LVL 2100 x 1200 S 230 282 282 255 301 301 301 362 362 85 62 204 402 533 1143 70

LVL 2400 x 920 S 223 259 259 245 275 275 290 332 332 93 70 188 373 516 1125 70

LVL 2400 x 1200 S 267 322 322 296 344 344 343 409 409 93 70 235 456 533 1143 70

35mm 40mm 45mm 50mm Optional Edge Strips Sheeting 0.9mm (Including capping - supplied

loose)

Refer to E-Core® Fire Door Handbook for correct application ®

Small VP Qtr Glass

6.38mm Clear Laminated Glass

Up to 0.25m2

6.38mm Clear Laminated Glass

>0.25m2 but 0.55m2 but

PRICE LIST (SPD-16.6)SPDOORS.COM.AU

IMPORTANT INFORMATIONUSING THE PRICELISTPLEASE NOTE: It is the Customer responsibility to select the products required. It is assumed that all customers are aware of the requirement of AS1905.1 and AS1530.4 and products are selected based on the technical information found in the E-Core® ‘Fire Door Handbook’.

PLACING ORDERSAll orders should be placed through the OLOS ordering system (see link at www.spdoors.com.au). If you require a log-in please contact the Sales Desk on 02 9905 8222 or 1300 43 66 77 (1300 4 DOORS)Customers are reminded that it is their responsibility to ensure all details are correct when orders are placed.FSE Special Purpose Doors:

• Cannot accept responsibility for positioning of various accessories, options or reinforcements to door panels unless clearly stipulated when placing the order. Customers are encouraged to utilise the OLOS system to minimise errors, and expedite deliveries.

• Reserves the right to reject any orders that do not meet Australian Standards or Building Codes, or where it is deemed that the doors are structurally unsound or may not be fit for purpose.

It is important that you ensure your orders are accurate before placing them with FSE. Please note that orders that are:

• Changed within 24 hours of being confirmed will incur a 15% rescheduling fee• Changed after 24 hours of being confirmed will incur a 35% rescheduling fee• Orders changed or cancelled 48 hours prior to the confirmed delivery date will be charged accordingly

PRICING POLICYPrices are subject to change without notice and FSE Special Purpose Doors:

• Is not obligated to furnish reasons for any changes in pricing• All price changes are at the Company’s absolute discretion• Will honour pricing on orders received prior to the date of notification

DOOR SIZESIn this pricelist, the door size is an “up to” door size. If your requirement is above the nominated standard size, please use the next largest size. For example if your door size is 2045x825 please use the 2100x920 pricing.

DOOR FINISHESDoors are finished in MDF, Pre-Primed Tempered Hardboard or Plywood veneer (paint or selected timbers). It is imperative that the surfaces of the door are prepared and painted in accordance with the finish.

For example, any paint grade veneer will require filing and sanding to achieve the required final finish. FSE Special Purpose Doors will not be held responsible for any painting, filling or finishing.

Due to the nature of M.D.F, it is recommended, when painting, to use an acrylic (water based) undercoat / sealer, followed by two coats, minimum, of enamel gloss. Solvent based sealer coats have been known at times to activate the wax in the board causing dull patching.

Tempered Hardboard’ will be pre-prime-coated. Any raw door edging (eg external timber edge strips) will still require pre-prime regiments (prior to full and proper painting / sealing, to all surfaces and edges) to maintain integrity and compliance with AS1909 – Section 9.2; for installation of timber door sets.

COSTING PAIRSWhen costing pairs of fire doors, please include meeting stiles and additional reinforcing plates (see example below):

1off 2100x2000 equal leaf pair 2 hour fire doors paint grade finish T-Bar meeting stiles:2off 2100x1000 Maxi 2hr PG FDC1702P2 $479.00 $958.001off Additional Plate Preparation PRE2950 $34.00 $34.001off 2135mm T-Bar Meeting Stiles MST0860 $161.00 $161.00 Sub-Total $1,153.00 GST @ 10% $115.30 Total $1,268.30

INCLUDED OPTIONSPlease note the following options are included in the prices quoted:

• 2 Way Swing (Double Action): Includes additional reinforcing plates and 1 set of Bull Nose meeting stiles per leaf. (Supplied loose).

ADDITIONAL REINFORCEMENTSIf additional reinforcement plates are required for various hardware or additional hinges etc., you will be required to provide the exact plate position when placing your order. A sketch must be provided to ensure accurate placement.

STANDARD FIRE DOOR SALESTo help support our customers major project requirements and provide consistent customer service FSE Special Purpose Doors have introduced our ‘Project registration’ initiative.

The aim is to support our customers with Project rates and consistent guaranteed supply. (Subject to agreed time period).

FSE will work with you to ensure the doors are manufactured in advance ready for your Project needs.

The benefits to you:• Competitive rates• Supply of doors ready to call off to best suit your project needs

The benefits to FSE:• Advanced knowledge of project requirements.• Economy of scale manufacturing.

All projects will need a minimum of 30 doors (all the same size) for each order to receive standard size project rates.

TERMS & CONDITIONS OF SALE AND MANUFACTURER’S GUARANTEEPlease visit our website www.spdoors.com.au to download the following:

• FSE Special Purpose Doors terms and conditions of sale• FSE Special Purpose Doors Manufacturer’s guarantee• FSE Special Purpose Doors OLOS terms and conditions of use

PACKING AND DELIVERYFSE Special Purpose Doors can deliver to anywhere in Australia and New Zealand.Please note:

• Prices exclude GST• Delivery charges are for drop off within a 5 metre radius of the delivery vehicle.• It is the customer’s responsibility to provide all labour, craning and hoisting as necessary to unload.• Our drivers will not physically lift off, carry or place doors to instruction as this is the customer’s responsibility.• It is the customer’s responsibility to move doors to their final location.

Delivery per drop to Sydney CBD$95

DELOUT1

Delivery per drop to Sydney Metropolitan (bounded by Penrith, Wollongong, Gosford)$300

DELOUT2

Delivery per drop to Sydney Outer (bounded by Newcastle, Bathurst, Nowra)$450

DELOUT3

Waiting time per hour (if driver is delayed by more than 15 minutes) minimum 1 hour charge$190MISC

Interstate DeliveriesPOA

DELOUT4

Packing & Materials (Standard Doors) per pallet (max 25 doors/pallet)$35

PACK001

Packing & Materials (Sliding Fire Doors)POA

PACK002

PLACEMENT OF VISION PANELS AND AIR GRILLESIf vision panels, air grilles or any other cut-out is required, a sketch must be provided to ensure accurate placement at the time of placing the order. The OLOS system caters for this requirement.

FSC (FOREST STEWARDSHIP COUNCIL) ACCREDITATIONFSE holds FSC certification and is able to supply products as required. To ensure proper adherence to certification requirements it is imperative that any FSC orders are clearly specified “mixed” or “pure” and other pertinent requirements. It is imperative that any FSC requirements are requested at the time of placing orders.

TAGGING & CERTIFICATION OF FIRE DOOR SETSIt is the client’s responsibility to tag and certify the finished fire door installation. However, FSE can provide this service at an additional cost if required. Please notify us when placing your order.Please note:

• When certifying a fire rated doorset you must use a suitably qualified practitioner in the field of certifying fire doorsets.• The certification of the fire doorset must be carried out as per AS1905.1 and other standards referenced in its content.• The complete doorset, frame, door and hardware must follow the E-Core® designs as set out in the ‘Fire Door Hand

Book’.FSE Special Purpose Doors reserves the right to withdraw its support for a doorset if the above has not been carried out correctly and the doorset is in breach of the E-Core® ‘Fire Door Handbook’, the testing and certification standards.

TECHNICAL INFORMATIONDOOR HANDINGPlease ensure you provide the handing when require to avoid any delays in production. In many cases it is critical that the handing of the door is known to facilitate correct preparation during manufacturing. This is critical for correct placement of bolection moulds, bottom seals cut outs etc. FSE Special Purpose Doors uses the following industry standard method of door handing:

VISION PANEL AND AIRE GRILLE LOCATION DRAWINGSTo ensure accurate placement of vision panels and air grilles – please ensure these drawings are supplied with every order.Copies are available from our website www.spdoors.com.au

OVERSIZED DOORSRates for oversized doors have been included for customer convenience. However the doors can not come with a full warranty. FSE Special Purpose Doors can not offer a full warranty for any door size outside of the Australian standard.If a more stable door is required FSE special Purpose Doors can offer steel internal subframes to solid core doors at additional cost.

GRILLE POSITION FORM VISION PANEL POSITION FORM MEETING STILE DETAILS

FIRE RATED MEETING STILE SELECTION CHART(Please tick box of your selection)

oT-Bar

Aluminium(Natural Anodised)

Supplied as Standard

oBull-Nose

Aluminium(Natural Anodised)

oRebatedTimber

(c/w seals)

StandardConsistent

Height2040mm

or2045mm

Standard Widths820mm or 920mm

A Standard Fire Door

354 Horsley Road, Milperra, NSW 2214 T 1300 4 DOORS F +61 2 9905 8333 E info@spdoors.com.au W spdoors.com.au

PRICE LIST (SPD-16.6)SPDOORS.COM.AU

IMPORTANT INFORMATIONUSING THE PRICELISTPLEASE NOTE: It is the Customer responsibility to select the products required. It is assumed that all customers are aware of the requirement of AS1905.1 and AS1530.4 and products are selected based on the technical information found in the E-Core® ‘Fire Door Handbook’.

PLACING ORDERSAll orders should be placed through the OLOS ordering system (see link at www.spdoors.com.au). If you require a log-in please contact the Sales Desk on 02 9905 8222 or 1300 43 66 77 (1300 4 DOORS)Customers are reminded that it is their responsibility to ensure all details are correct when orders are placed.FSE Special Purpose Doors:

• Cannot accept responsibility for positioning of various accessories, options or reinforcements to door panels unless clearly stipulated when placing the order. Customers are encouraged to utilise the OLOS system to minimise errors, and expedite deliveries.

• Reserves the right to reject any orders that do not meet Australian Standards or Building Codes, or where it is deemed that the doors are structurally unsound or may not be fit for purpose.

It is important that you ensure your orders are accurate before placing them with FSE. Please note that orders that are:

• Changed within 24 hours of being confirmed will incur a 15% rescheduling fee• Changed after 24 hours of being confirmed will incur a 35% rescheduling fee• Orders changed or cancelled 48 hours prior to the confirmed delivery date will be charged accordingly

PRICING POLICYPrices are subject to change without notice and FSE Special Purpose Doors:

• Is not obligated to furnish reasons for any changes in pricing• All price changes are at the Company’s absolute discretion• Will honour pricing on orders received prior to the date of notification

DOOR SIZESIn this pricelist, the door size is an “up to” door size. If your requirement is above the nominated standard size, please use the next largest size. For example if your door size is 2045x825 please use the 2100x920 pricing.

DOOR FINISHESDoors are finished in MDF, Pre-Primed Tempered Hardboard or Plywood veneer (paint or selected timbers). It is imperative that the surfaces of the door are prepared and painted in accordance with the finish.

For example, any paint grade veneer will require filing and sanding to achieve the required final finish. FSE Special Purpose Doors will not be held responsible for any painting, filling or finishing.

Due to the nature of M.D.F, it is recommended, when painting, to use an acrylic (water based) undercoat / sealer, followed by two coats, minimum, of enamel gloss. Solvent based sealer coats have been known at times to activate the wax in the board causing dull patching.

Tempered Hardboard’ will be pre-prime-coated. Any raw door edging (eg external timber edge strips) will still require pre-prime regiments (prior to full and proper painting / sealing, to all surfaces and edges) to maintain integrity and compliance with AS1909 – Section 9.2; for installation of timber door sets.

COSTING PAIRSWhen costing pairs of fire doors, please include meeting stiles and additional reinforcing plates (see example below):

1off 2100x2000 equal leaf pair 2 hour fire doors paint grade finish T-Bar meeting stiles:2off 2100x1000 Maxi 2hr PG FDC1702P2 $479.00 $958.001off Additional Plate Preparation PRE2950 $34.00 $34.001off 2135mm T-Bar Meeting Stiles MST0860 $161.00 $161.00 Sub-Total $1,153.00 GST @ 10% $115.30 Total $1,268.30

INCLUDED OPTIONSPlease note the following options are included in the prices quoted:

• 2 Way Swing (Double Action): Includes additional reinforcing plates and 1 set of Bull Nose meeting stiles per leaf. (Supplied loose).

ADDITIONAL REINFORCEMENTSIf additional reinforcement plates are required for various hardware or additional hinges etc., you will be required to provide the exact plate position when placing your order. A sketch must be provided to ensure accurate placement.

STANDARD FIRE DOOR SALESTo help support our customers major project requirements and provide consistent customer service FSE Special Purpose Doors have introduced our ‘Project registration’ initiative.

The aim is to support our customers with Project rates and consistent guaranteed supply. (Subject to agreed time period).

FSE will work with you to ensure the doors are manufactured in advance ready for your Project needs.

The benefits to you:• Competitive rates• Supply of doors ready to call off to best suit your project needs

The benefits to FSE:• Advanced knowledge of project requirements.• Economy of scale manufacturing.

All projects will need a minimum of 30 doors (all the same size) for each order to receive standard size project rates.

TERMS & CONDITIONS OF SALE AND MANUFACTURER’S GUARANTEEPlease visit our website www.spdoors.com.au to download the following:

• FSE Special Purpose Doors terms and conditions of sale• FSE Special Purpose Doors Manufacturer’s guarantee• FSE Special Purpose Doors OLOS terms and conditions of use

PACKING AND DELIVERYFSE Special Purpose Doors can deliver to anywhere in Australia and New Zealand.Please note:

• Prices exclude GST• Delivery charges are for drop off within a 5 metre radius of the delivery vehicle.• It is the customer’s responsibility to provide all labour, craning and hoisting as necessary to unload.• Our drivers will not physically lift off, carry or place doors to instruction as this is the customer’s responsibility.• It is the customer’s responsibility to move doors to their final location.

Delivery per drop to Sydney CBD$95

DELOUT1

Delivery per drop to Sydney Metropolitan (bounded by Penrith, Wollongong, Gosford)$300

DELOUT2

Delivery per drop to Sydney Outer (bounded by Newcastle, Bathurst, Nowra)$450

DELOUT3

Waiting time per hour (if driver is delayed by more than 15 minutes) minimum 1 hour charge$190MISC

Interstate DeliveriesPOA

DELOUT4

Packing & Materials (Standard Doors) per pallet (max 25 doors/pallet)$35

PACK001

Packing & Materials (Sliding Fire Doors)POA

PACK002

PLACEMENT OF VISION PANELS AND AIR GRILLESIf vision panels, air grilles or any other cut-out is required, a sketch must be provided to ensure accurate placement at the time of placing the order. The OLOS system caters for this requirement.

FSC (FOREST STEWARDSHIP COUNCIL) ACCREDITATIONFSE holds FSC certification and is able to supply products as required. To ensure proper adherence to certification requirements it is imperative that any FSC orders are clearly specified “mixed” or “pure” and other pertinent requirements. It is imperative that any FSC requirements are requested at the time of placing orders.

TAGGING & CERTIFICATION OF FIRE DOOR SETSIt is the client’s responsibility to tag and certify the finished fire door installation. However, FSE can provide this service at an additional cost if required. Please notify us when placing your order.Please note:

• When certifying a fire rated doorset you must use a suitably qualified practitioner in the field of certifying fire doorsets.• The certification of the fire doorset must be carried out as per AS1905.1 and other standards referenced in its content.• The complete doorset, frame, door and hardware must follow the E-Core® designs as set out in the ‘Fire Door Hand

Book’.FSE Special Purpose Doors reserves the right to withdraw its support for a doorset if the above has not been carried out correctly and the doorset is in breach of the E-Core® ‘Fire Door Handbook’, the testing and certification standards.

TECHNICAL INFORMATIONDOOR HANDINGPlease ensure you provide the handing when require to avoid any delays in production. In many cases it is critical that the handing of the door is known to facilitate correct preparation during manufacturing. This is critical for correct placement of bolection moulds, bottom seals cut outs etc. FSE Special Purpose Doors uses the following industry standard method of door handing:

VISION PANEL AND AIRE GRILLE LOCATION DRAWINGSTo ensure accurate placement of vision panels and air grilles – please ensure these drawings are supplied with every order.Copies are available from our website www.spdoors.com.au

OVERSIZED DOORSRates for oversized doors have been included for customer convenience. However the doors can not come with a full warranty. FSE Special Purpose Doors can not offer a full warranty for any door size outside of the Australian standard.If a more stable door is required FSE special Purpose Doors can offer steel internal subframes to solid core doors at additional cost.

GRILLE POSITION FORM VISION PANEL POSITION FORM MEETING STILE DETAILS

FIRE RATED MEETING STILE SELECTION CHART(Please tick box of your selection)

oT-Bar

Aluminium(Natural Anodised)

Supplied as Standard

oBull-Nose

Aluminium(Natural Anodised)

oRebatedTimber

(c/w seals)

StandardConsistent

Height2040mm

or2045mm

Standard Widths820mm or 920mm

A Standard Fire Door

354 Horsley Road, Milperra, NSW 2214 T 1300 4 DOORS F +61 2 9905 8333 E info@spdoors.com.au W spdoors.com.au

PRICE LIST (SPD-16.6)SPDOORS.COM.AU

IMPORTANT INFORMATIONUSING THE PRICELISTPLEASE NOTE: It is the Customer responsibility to select the products required. It is assumed that all customers are aware of the requirement of AS1905.1 and AS1530.4 and products are selected based on the technical information found in the E-Core® ‘Fire Door Handbook’.

PLACING ORDERSAll orders should be placed through the OLOS ordering system (see link at www.spdoors.com.au). If you require a log-in please contact the Sales Desk on 02 9905 8222 or 1300 43 66 77 (1300 4 DOORS)Customers are reminded that it is their responsibility to ensure all details are correct when orders are placed.FSE Special Purpose Doors:

• Cannot accept responsibility for positioning of various accessories, options or reinforcements to door panels unless clearly stipulated when placing the order. Customers are encouraged to utilise the OLOS system to minimise errors, and expedite deliveries.

• Reserves the right to reject any orders that do not meet Australian Standards or Building Codes, or where it is deemed that the doors are structurally unsound or may not be fit for purpose.

It is important that you ensure your orders are accurate before placing them with FSE. Please note that orders that are:

• Changed within 24 hours of being confirmed will incur a 15% rescheduling fee• Changed after 24 hours of being confirmed will incur a 35% rescheduling fee• Orders changed or cancelled 48 hours prior to the confirmed delivery date will be charged accordingly

PRICING POLICYPrices are subject to change without notice and FSE Special Purpose Doors:

• Is not obligated to furnish reasons for any changes in pricing• All price changes are at the Company’s absolute discretion• Will honour pricing on orders received prior to the date of notification

DOOR SIZESIn this pricelist, the door size is an “up to” door size. If your requirement is above the nominated standard size, please use the next largest size. For example if your door size is 2045x825 please use the 2100x920 pricing.

DOOR FINISHESDoors are finished in MDF, Pre-Primed Tempered Hardboard or Plywood veneer (paint or selected timbers). It is imperative that the surfaces of the door are prepared and painted in accordance with the finish.

For example, any paint grade veneer will require filing and sanding to achieve the required final finish. FSE Special Purpose Doors will not be held responsible for any painting, filling or finishing.

Due to the nature of M.D.F, it is recommended, when painting, to use an acrylic (water based) undercoat / sealer, followed by two coats, minimum, of enamel gloss. Solvent based sealer coats have been known at times to activate the wax in the board causing dull patching.

Tempered Hardboard’ will be pre-prime-coated. Any raw door edging (eg external timber edge strips) will still require pre-prime regiments (prior to full and proper painting / sealing, to all surfaces and edges) to maintain integrity and compliance with AS1909 – Section 9.2; for installation of timber door sets.

COSTING PAIRSWhen costing pairs of fire doors, please include meeting stiles and additional reinforcing plates (see example below):

1off 2100x2000 equal leaf pair 2 hour fire doors paint grade finish T-Bar meeting stiles:2off 2100x1000 Maxi 2hr PG FDC1702P2 $479.00 $958.001off Additional Plate Preparation PRE2950 $34.00 $34.001off 2135mm T-Bar Meeting Stiles MST0860 $161.00 $161.00 Sub-Total $1,153.00 GST @ 10% $115.30 Total $1,268.30

INCLUDED OPTIONSPlease note the following options are included in the prices quoted:

• 2 Way Swing (Double Action): Includes additional reinforcing plates and 1 set of Bull Nose meeting stiles per leaf. (Supplied loose).

ADDITIONAL REINFORCEMENTSIf additional reinforcement plates are required for various hardware or additional hinges etc., you will be required to provide the exact plate position when placing your order. A sketch must be provided to ensure accurate placement.

STANDARD FIRE DOOR SALESTo help support our customers major project requirements and provide consistent customer service FSE Special Purpose Doors have introduced our ‘Project registration’ initiative.

The aim is to support our customers with Project rates and consistent guaranteed supply. (Subject to agreed time period).

FSE will work with you to ensure the doors are manufactured in advance ready for your Project needs.

The benefits to you:• Competitive rates• Supply of doors ready to call off to best suit your project needs

The benefits to FSE:• Advanced knowledge of project requirements.• Economy of scale manufacturing.

All projects will need a minimum of 30 doors (all the same size) for each order to receive standard size project rates.

TERMS & CONDITIONS OF SALE AND MANUFACTURER’S GUARANTEEPlease visit our website www.spdoors.com.au to download the following:

• FSE Special Purpose Doors terms and conditions of sale• FSE Special Purpose Doors Manufacturer’s guarantee• FSE Special Purpose Doors OLOS terms and conditions of use

PACKING AND DELIVERYFSE Special Purpose Doors can deliver to anywhere in Australia and New Zealand.Please note:

• Prices exclude GST• Delivery charges are for drop off within a 5 metre radius of the delivery vehicle.• It is the customer’s responsibility to provide all labour, craning and hoisting as necessary to unload.• Our drivers will not physically lift off, carry or place doors to instruction as this is the customer’s responsibility.• It is the customer’s responsibility to move doors to their final location.

Delivery per drop to Sydney CBD$95

DELOUT1

Delivery per drop to Sydney Metropolitan (bounded by Penrith, Wollongong, Gosford)$300

DELOUT2

Delivery per drop to Sydney Outer (bounded by Newcastle, Bathurst, Nowra)$450

DELOUT3

Waiting time per hour (if driver is delayed by more than 15 minutes) minimum 1 hour charge$190MISC

Interstate DeliveriesPOA

DELOUT4

Packing & Materials (Standard Doors) per pallet (max 25 doors/pallet)$35

PACK001

Packing & Materials (Sliding Fire Doors)POA

PACK002

PLACEMENT OF VISION PANELS AND AIR GRILLESIf vision panels, air grilles or any other cut-out is required, a sketch must be provided to ensure accurate placement at the time of placing the order. The OLOS system caters for this requirement.

FSC (FOREST STEWARDSHIP COUNCIL) ACCREDITATIONFSE holds FSC certification and is able to supply products as required. To ensure proper adherence to certification requirements it is imperative that any FSC orders are clearly specified “mixed” or “pure” and other pertinent requirements. It is imperative that any FSC requirements are requested at the time of placing orders.

TAGGING & CERTIFICATION OF FIRE DOOR SETSIt is the client’s responsibility to tag and certify the finished fire door installation. However, FSE can provide this service at an additional cost if required. Please notify us when placing your order.Please note:

• When certifying a fire rated doorset you must use a suitably qualified practitioner in the field of certifying fire doorsets.• The certification of the fire doorset must be carried out as per AS1905.1 and other standards referenced in its content.• The complete doorset, frame, door and hardware must follow the E-Core® designs as set out in the ‘Fire Door Hand

Book’.FSE Special Purpose Doors reserves the right to withdraw its support for a doorset if the above has not been carried out correctly and the doorset is in breach of the E-Core® ‘Fire Door Handbook’, the testing and certification standards.

TECHNICAL INFORMATIONDOOR HANDINGPlease ensure you provide the handing when require to avoid any delays in production. In many cases it is critical that the handing of the door is known to facilitate correct preparation during manufacturing. This is critical for correct placement of bolection moulds, bottom seals cut outs etc. FSE Special Purpose Doors uses the following industry standard method of door handing:

VISION PANEL AND AIRE GRILLE LOCATION DRAWINGSTo ensure accurate placement of vision panels and air grilles – please ensure these drawings are supplied with every order.Copies are available from our website www.spdoors.com.au

OVERSIZED DOORSRates for oversized doors have been included for customer convenience. However the doors can not come with a full warranty. FSE Special Purpose Doors can not offer a full warranty for any door size outside of the Australian standard.If a more stable door is required FSE special Purpose Doors can offer steel internal subframes to solid core doors at additional cost.

GRILLE POSITION FORM VISION PANEL POSITION FORM MEETING STILE DETAILS

FIRE RATED MEETING STILE SELECTION CHART(Please tick box of your selection)

oT-Bar

Aluminium(Natural Anodised)

Supplied as Standard

oBull-Nose

Aluminium(Natural Anodised)

oRebatedTimber

(c/w seals)

StandardConsistent

Height2040mm

or2045mm

Standard Widths820mm or 920mm

A Standard Fire Door

354 Horsley Road, Milperra, NSW 2214 T 1300 4 DOORS F +61 2 9905 8333 E info@spdoors.com.au W spdoors.com.au