Upload
others
View
11
Download
0
Embed Size (px)
Citation preview
1
Standard Parts Catalogue
2
Data Plastics Ltd
Standard Parts Catalogue January 2012
Contents
Tapered Caps and Plugs – Pages 4-10
Pipe Thread Protectors – Pages 41-42
Electrical Connector Caps – Page 11
Round PVC Caps - Pages 43-44
Electrical Connector Plugs – Page 12
Standard and Hi-Temp Round plugs or Square Caps– Pages 45-46
Non-Threaded Caps and Plugs Wide-Flange – Page 13-15
Vinyl Pull Caps – Pages 47-48
Interrupted-Bead Plugs – Page 16
Hi-Temp Silicone Caps and Plugs – Pages 49-50
Tube Caps and Plugs – Page 17-25
Hi-Temp Flexible Protection Caps – Pages 51
Caps and Plugs For Threaded Parts – Pages 26-40 BSP, UNF, JIC, UN, UNS, NPT and Metric
Ferrules and End Caps – Pages 52-54
Call our Sales Team on 01993 700777 or email us at
[email protected] to obtain a quote or ask for
samples of the parts you require.
3
Finishing Parts – Ribbed Inserts – Pages 55-60
Materials and Properties Chart Page 69
Snap-in Plugs – Pages 61-62
Conversion Table Page 70
Quick Release Coupling Caps and Plugs – Pages 63
Hose Protection Flanged Washers – Page 64
Bundle End Caps – Page 65
SEA Flange Caps – Pages 65
Cable Ties – Page 66
Protective Sleeving – Pages 67-68
4
Tapered Caps and Plugs
SP33000 Series Red LD Polythene
SP33000 Series Red LD Polythene
To fit thread Dimensions
Part Number Cap Plug A B C D E F Outside Dia Inside Dia Depth Inches Metric Inches Metric Inches Metric Inches Metric Inches Metric Inches Metric
Bag Quantity
SP33002 M4 M6 0.173 4.39 0.240 6.10 0.111 2.82 0.178 4.52 0.375 9.53 0.375 9.53 10,000
SP33003 M5/M6 M8 0.240 6.10 0.302 7.67 0.178 4.52 0.240 6.10 0.375 9.53 0.438 11.13 10,000
SP33004 1/4” UNF 3/8” UNF 0.299 7.59 0.365 9.27 0.237 6.02 0.303 7.70 0.375 9.53 0.500 12.70 10,000
SP33005 M8 1/8” BSP 0.330 8.38 0.396 10.06 0.268 6.81 0.334 8.48 0.375 9.53 0.531 13.49 10,000
SP33006 - - 0.370 9.40 0.427 10.85 0.308 7.82 0.365 9.27 0.375 9.53 0.563 14.30 10,000
SP33007 M10 M12 0.396 10.06 0.456 11.58 0.334 8.48 0.394 10.01 0.375 9.53 0.594 15.09 10,000
SP33008 1/8” BSP 1/4” BSP 0.423 10.74 0.485 12.32 0.361 9.17 0.423 10.74 0.375 9.53 0.625 15.88 10,000
SP33009 - M14 0.452 11.48 0.513 13.03 0.390 9.91 0.451 11.46 0.375 9.53 0.656 16.66 10,000
SP33010 M12 9/16” UNF 0.476 12.09 0.547 13.89 0.414 10.52 0.485 12.32 0.438 11.13 0.688 17.48 10,000
SP33011 1/4”BSP M16 0.537 13.64 0.608 15.44 0.475 12.07 0.546 13.87 0.438 11.13 0.750 19.05 10,000
SP33012 M14 3/8” BSP 0.555 14.10 0.631 16.03 0.493 12.52 0.569 14.45 0.469 11.91 0.750 19.05 10,000
SP33013 - M18 0.580 14.73 0.667 16.94 0.518 13.16 0.605 15.37 0.500 12.70 0.813 20.65 10,000
SP33014 M16 M20 0.646 16.41 0.727 18.47 0.584 14.83 0.665 16.89 0.500 12.70 0.875 22.23 7,500
SP33015 - - 0.710 18.03 0.785 19.94 0.648 16.46 0.723 18.36 0.500 12.70 0.875 22.23 5,000
SP33016 M18 1/2” BSP 0.690 17.53 0.788 20.02 0.628 15.95 0.726 18.44 0.563 14.30 0.937 23.79 5,000
SP33017 3/4” UNF M22 0.730 18.54 0.823 20.91 0.668 16.97 0.761 19.33 0.563 14.30 0.968 24.58 5,000
SP33018 - 7/8” UNF 0.750 19.05 0.848 21.54 0.668 16.97 0.786 19.96 0.563 14.30 1.000 25.40 5,000
SP33065 - - 0.875 22.22 0.875 22.22 0.760 19.30 0.760 19.30 1.000 25.40 1.000 25.40 1,000
SP33019 1/2” BSP 5/8” BSP 0.813 20.65 0.915 23.24 0.751 19.08 0.853 21.67 0.625 15.88 1.063 27.00 5,000
SP33020 M22 1” UNF 0.866 22.00 0.981 24.92 0.804 20.42 0.919 23.34 0.625 15.88 1.125 28.58 5,000
Back to Contents
The tapered body provides firm friction fit as a cap or plug. To fit all BSP, NPT and
Metric sizes from 1/8” to 6” (3mm to 152mm). This range can also be produced in
a variety of other colours and materials including: High-temp TPR for paint and
plating protection up to 150 oC and Polypropylene for requirements up to 110
oC.
5
Tapered Caps and Plugs (continued from previous page)
SP33021 5/8” BSP - 0.920 23.37 1.040 26.42 0.858 21.79 0.978 24.84 0.688 17.48 1.156 29.36 2,500
SP33022 M27 M28 0.972 24.69 1.090 27.69 0.910 23.11 1.028 26.11 0.750 19.05 1.250 31.75 2,500
SP33061 - - 0.984 25.00 1.106 28.09 0.844 22.45 1.006 25.55 0.656 16.66 1.438 36.53 2,500
SP33023 M28 M30 1.101 27.97 1.215 30.86 1.039 26.39 1.153 29.29 0.750 19.05 1.375 34.93 2,500
SP33025 M32 M35 1.224 31.09 1.355 34.42 1.162 29.51 1.293 32.84 0.750 19.05 1.500 38.10 2,000
SP33033 - - 1.299 32.99 1.355 34.42 1.237 31.42 1.293 32.84 0.375 9.53 1.500 38.10 1,500
SP33026 1” BSP 1 1/8” BSP 1.312 33.32 1.465 37.21 1.250 31.75 1.403 35.64 0.875 22.23 1.625 41.28 1,500
SP33027 1 1/8” BSP 1 1/4” BSP 1.447 36.76 1.600 40.64 1.385 35.18 1.538 39.07 0.875 22.23 1.750 44.45 1,000
SP33034 1 1/2” UNF - 1.519 38.58 1.600 40.64 1.457 37.01 1.538 39.07 0.500 12.70 1.750 44.45 2,000
SP33028 M40 1 3/8” BSP 1.560 39.62 1.682 42.72 1.498 38.05 1.620 41.15 0.750 19.05 1.875 47.63 1,000
SP33029 M42 M45 1.630 41.40 1.765 44.83 1.568 39.63 1.703 43.26 0.750 19.05 1.937 49.19 1,000
SP33056 - - 1.670 42.42 1.816 46.13 1.608 40.84 1.722 43.74 1.375 34.93 2.000 50.80 3,500
SP33035 - - 1.807 45.90 1.824 46.33 1.745 44.32 1.762 44.75 1.375 9.53 2.000 50.80 1,000
SP33030 1 3/8” BSF 1 1/2” BSF 1.754 44.55 1.861 47.27 1.692 42.98 1.799 45.69 0.750 19.05 2.000 50.80 1,000
SP33036 - - 1.860 47.24 2.000 50.80 1.798 45.67 1.938 49.23 1.000 25.40 2.125 53.97 500
SP33032 1 1/2” BSF M52 1.900 48.26 2.076 52.73 1.838 46.69 2.014 51.16 1.000 25.40 2.250 57.15 1,000
SP33037 - - 1.990 50.55 2.132 54.15 1.928 48.97 2.070 52.58 1.000 25.40 2.250 57.15 750
SP33038 - - 2.043 51.89 2.147 54.53 1.981 50.32 2.085 52.96 0.750 19.05 2.313 58.75 1,000
SP33039 1 5/8” BSP M55 2.090 53.09 2.243 56.97 2.028 51.51 2.181 55.40 1.000 25.40 2.438 61.93 500
SP33040 M58 2” BSP 2.170 55.12 2.312 58.72 2.108 53.54 2.250 57.15 1.000 25.40 2.563 65.10 500
SP33043 2” BSP M60 2.337 59.36 2.464 62.59 2.275 57.79 2.402 61.01 1.000 25.40 2.625 66.68 500
SP33048 - - 2.680 68.07 2.790 70.87 2.618 66.50 2.728 69.29 0.750 19.05 2.938 74.63 500
SP33049 - 2 1/2” BSP 2.757 70.03 2.984 75.79 2.695 68.45 2.922 74.22 1.000 25.40 3.125 79.38 250
SP33050 - - 2.892 73.46 2.980 75.69 2.830 71.88 2.918 74.12 0.750 19.05 3.250 82.55 250
SP33051 2 1/2” BSP - 3.037 77.14 3.150 80.01 2.975 75.57 3.098 78.69 0.750 19.05 3.375 85.73 250
SP33052 - - 3.025 76.84 3.245 82.42 2.963 75.26 3.183 80.85 1.000 25.40 3.375 85.73 400
Back to Contents
6
Tapered Caps and Plugs
T Series Red LD Polythene Part Number
To Plug Thread sizes
NPT Stan- BSP dard Metric
To Cap Thread Sizes
NPT Stan- BSP dard Metric
Dimensions
A B C D E F PLUG CAP Inches Metric Inches Metric Inches Metric Inches Metric Inches Metric Inches Metric
Bag Quantity
T01-01 - 10/32 M5 - - M2/2.5 .116 2.95 .182 4.62 .055 1.35 .120 3.05 .38 9.65 .31 7.87 1,000
T02-02 - 1/4 M6 - - M3/3.5 .173 4.39 .240 6.10 .111 2.82 .177 4.50 .38 9.65 .38 9.65 1,000
T03 - - - - - M4 .210 5.33 .275 6.99 .146 3.71 .211 5.36 .34 8.64 .45 11.43 2,000
T04 - - M7 - - M4.5 .209 5.31 .269 6.83 .150 3.81 .210 5.33 .34 8.64 .38 9.65 3,000
T05 - 5/16 M8X1 - - M5 .236 5.99 .302 7.67 .174 4.42 .240 6.10 .38 9.65 .44 11.18 1,000
T06 - - - - - M6 .267 6.78 .335 8.51 .205 5.21 .273 6.93 .36 9.65 .47 11.94 1,000
T07 - 3/8 M10X1.25 - 5/16 M7 .299 7.59 .365 9.27 .235 5.97 .302 7.67 .38 9.65 .50 12.70 1,000
T08 1/8 - - - - - .330 8.38 .396 10.06 .267 6.78 .333 8.46 .38 9.65 .53 13.46 1,000
T09 - 7/16 M12 - - M8X1 .361 9.17 .427 10.85 .298 7.57 .365 9.27 .38 9.65 .56 14.22 1,000
T11 - - M12X1.25 - 3/8 - .390 9.91 .456 11.58 .327 8.31 .394 10.01 .38 9.65 .59 14.99 1,000
T12 1/4 1/2 M14 1/8 - M10x1.25 .419 10.64 .485 12.32 .356 9.04 .422 10.72 .38 9.65 .63 16.00 1,000
T13 - - M14x1.5 - 7/16 - .447 11.35 .513 13.03 .385 9.78 .451 11.46 .38 9.65 .66 16.76 1,000
T14 - 9/16 - - 1/2 - .477 12.12 .547 13.89 .415 10.54 .485 12.32 .31 7.87 .69 17.53 1,500
T15 - 9/16 - - 1/2 - .471 11.96 .547 13.89 .409 10.39 .485 12.32 .44 11.18 .69 17.53 1,000
T16 - - M16 - - M12x1.25 .500 12.70 .576 14.63 .440 11.18 .516 13.11 .44 11.18 .72 18.29 1,000
T17 - 5/8 - 1/4 - - .532 13.51 .608 15.44 .469 11.89 .545 13.84 .44 11.18 .75 19.05 1,000
T18 - - - - - - .554 14.07 .612 15.55 .490 12.45 .551 14.00 .31 7.87 .75 19.05 1,000
T19 3/8 - M18 - 9/16 - .550 13.97 .631 16.03 .487 12.37 .568 14.43 .47 11.94 .75 19.05 1,000
T20 - - M18x1.5 - 5/8 M14x1.5 .580 14.73 .667 16.94 .518 13.16 .605 15.37 .50 12.70 .81 20.57 1,000
Back to Contents
These tapered caps can be used as either a cap or a plug and are flexible and easy to install and remove. They also make an ideal paint mask. Available as special order in thermoplastic rubber – please state your requirements at time of ordering. Applicable spec: NAS-834 (MIL-C- 5501/7, MIL-C-52078)
7
Tapered Caps and Plugs (continued from previous page)
T Series Red LD Polythene Part Number
To Plug Thread sizes
NPT Stan- BSP dard Metric
To Cap Thread Sizes
NPT Stan- BSP dard Metric
Dimensions
A B C D E F PLUG CAP Inches Metric Inches Metric Inches Metric Inches Metric Inches Metric Inches Metric
Bag Quantity
T21 - - - - - - .610 15.49 .695 17.65 .549 13.94 .634 16.10 .50 12.70 .84 21.34 1,000
T22 - 3/4 M20 - - - .640 16.26 .727 18.47 .578 14.68 .664 16.87 .50 12.70 .88 22.35 1,000
T23 - - M20x1.5 3/8 - M16x1.5 .675 17.15 .755 19.18 .613 15.57 .693 17.60 .50 12.70 .88 22.35 1,000
T24 1/2 - M22 - - - .690 17.53 .788 20.02 .628 15.95 .726 18.44 .56 14.22 .94 23.88 1,000
T26 - - M22x1.5 - 3/4 - .725 18.42 .823 20.91 .663 16.84 .761 19.33 .56 14.22 .97 24.64 1,000
T27 - 7/8 M24 - - M18x1.5 .750 19.05 .848 21.54 .687 17.45 .785 19.94 .56 14.22 1.00 25.40 1,000
T28 - 15/16 M24x2 1/2 - - .802 20.37 .911 23.14 .740 18.80 .849 21.57 .63 16.00 1.06 26.93 1,000
T29 - 1 - - 7/8 M20x1.5 .815 20.70 .930 23.62 .753 19.13 .868 22.05 .63 16.00 1.09 27.69 1,000
T30 3/4 - - - - - .854 21.69 .958 24.33 .790 20.07 .894 22.71 .66 16.76 1.13 28.70 500
T31 3/4 - M27 - - - .869 22.07 .973 24.71 .805 20.45 .909 23.09 .75 19.05 1.13 28.70 500
T32 3/4 - - - - - .866 22.00 .975 24.77 .803 20.40 .912 23.17 .63 16.00 1.13 28.70 1,000
T34 - 1-1/16 M27x2 - - M22x1.5 .915 23.24 1.040 26.42 .855 21.72 .980 24.89 .69 17.53 1.16 29.46 1,000
T33 - - - - - - .960 24.38 1.047 26.59 .900 22.86 .987 25.07 .50 12.70 1.19 30.23 1,000
T37 - - - - - - .950 24.13 1.090 27.69 .890 22.61 1.030 26.16 1.03 26.16 1.25 31.75 300
T38 - - - 3/4 - M24x2 .964 24.49 1.090 27.69 .901 22.89 1.027 26.09 .75 19.05 1.25 31.75 500
T39 - - - - - - .975 24.77 1.104 28.04 .918 23.32 1.047 26.59 .75 19.05 1.44 36.58 400
T40 - - M30x2 - 1-1/16 - .995 25.27 1.145 29.08 .933 23.70 1.083 27.51 .75 19.05 1.31 33.28 500
T41 1 1-1/4 M33 - - M27x2 1.094 27.79 1.215 30.86 1.031 26.19 1.152 29.26 .75 19.05 1.41 35.82 500
T42 - - - - - - 1.175 29.90 1.284 32.60 1.113 28.30 1.222 31.00 .63 16.00 1.44 36.60 500
T43 - - - - - - 1.175 29.85 1.284 32.61 1.113 28.27 1.222 31.04 .66 16.76 1.67 42.42 400
T44 - 1-5/16 M33x2 - - - 1.179 29.95 1.286 32.66 1.115 28.32 1.222 31.04 .75 19.05 1.44 36.58 300
T45 - - - - - - 1.276 32.41 1.312 33.32 1.155 29.32 1.190 32.23 .56 14.20 1.38 35.05 400
T46 - - - - - M30x2 1.224 31.09 1.355 34.42 1.161 29.49 1.292 32.82 .75 19.05 1.50 38.10 500
T47 - - M36x3 1 1-5/16 - 1.235 31.37 1.360 34.55 1.173 29.80 1.298 32.97 .81 20.57 1.50 38.10 500
T48 - - - - - - 1.292 32.82 1.356 34.44 1.231 31.27 1.295 32.89 .75 19.05 1.50 38.10 330
T49 - 1-1/2 - - - - 1.312 33.33 1.465 37.21 1.249 3.173 1.402 35.61 .88 22.35 1.63 41.40 500
Back to Contents
8
Tapered Caps and Plugs (continued from previous page)
T Series Red LD Polythene Part Number
To Plug Thread sizes
NPT Stan- BSP dard Metric
To Cap Thread Sizes
NPT Stan- BSP dard Metric
Dimensions
A B C D E F PLUG CAP Inches Metric Inches Metric Inches Metric Inches Metric Inches Metric Inches Metric
Bag Quantity
T50 - - M39x3 - - M33x2 1.312 33.32 1.465 37.21 1.248 31.70 1.401 35.59 .75 19.05 1.62 41.15 300
T51 - - - - - - 1.435 36.45 1.500 38.10 1.340 34.04 1.420 36.07 .80 20.32 1.75 44.45 200
T52 - - - - - - 1.344 34.14 1.507 38.28 1.282 32.56 1.445 36.70 .94 23.88 1.77 44.96 200
T53 - 1-9/16 - - - - 1.447 36.76 1.600 40.64 1.384 35.15 1.537 39.04 .88 22.35 1.75 44.45 200
T54 1-1/4 - - - - M36x3 1.451 36.86 1.601 40.67 1.387 35.23 1.537 39.04 .75 19.05 1.75 44.45 200
T55 - 1-5/8 - - - - 1.519 38.58 1.602 40.69 1.455 36.96 1.538 39.07 .75 19.05 1.75 44.45 360
T56 - - - 1-1/4 1-5/8 M39x3 1.560 39.63 1.682 42.72 1.498 38.05 1.620 41.15 .75 19.05 1.88 47.75 200
T57 - - - 1-1/4 1-5/8 - 1.574 39.98 1.688 42.88 1.514 38.46 1.628 41.35 .62 15.75 1.88 47.75 1,000
T58 - - - - - - 1.633 41.48 1.750 44.45 1.569 39.85 1.690 42.82 .75 19.05 1.84 46.74 200
T59 1-1/2 1-7/8 - - - - 1.720 43.69 1.850 46.99 1.664 42.27 1.794 45.57 .75 19.05 2.03 51.56 700
T60 1-1/2 1-7/8 - - - - 1.750 44.45 1.880 47.75 1.688 42.88 1.818 46.18 .75 19.05 2.00 50.80 200
T61 - - - 1-1/2 1-7/8 - 1.780 45.21 1.950 49.53 1.718 43.64 1.888 47.96 1.00 25.40 2.13 54.10 200
T62 - - - - - - 1.865 47.37 1.975 50.17 1.785 45.34 1.895 48.13 .67 17.02 2.38 60.45 500
T63 - - - - - - 1.844 46.84 2.000 50.80 1.781 45.24 1.938 49.23 1.00 25.40 2.13 54.10 200
T65 - - - - - - 1.900 48.26 2.076 52.73 1.837 46.66 2.013 51.13 1.00 25.40 2.25 57.15 500
T67 - - - - - - 1.975 50.17 2.132 54.15 1.913 48.59 2.070 52.58 1.00 25.40 2.25 57.15 200
T68 - - - - - - 2.020 51.31 2.100 53.34 2.060 52.32 2.140 54.36 .38 9.65 2.59 65.79 200
T69 - - - - - - 2.015 51.18 2.147 54.54 1.953 49.61 2.085 52.96 .75 19.05 2.31 58.68 200
T70 - 2-1/4 - - - - 2.067 52.50 2.243 56.97 2.005 50.93 2.181 55.40 1.00 25.40 2.44 61.98 200
T71 - - - - 2-1/4 - 2.136 54.25 2.312 58.72 2.074 52.68 2.250 57.15 1.00 25.40 2.56 65.03 200
T72 - - - - - - 2.280 57.91 2.400 60.96 2.216 56.29 2.336 59.33 .75 19.05 2.80 71.12 300
T73 - - - - - - 2.125 53.98 2.406 61.11 2.063 52.40 2.344 59.54 1.00 25.40 2.53 64.26 200
T74 - - - 2 - - 2.298 58.37 2.464 62.59 2.235 56.77 2.401 60.99 1.00 25.40 2.63 66.80 100
T75 - - - - - - 2.300 58.42 2.464 62.59 2.220 56.39 2.383 60.53 .75 19.05 2.66 67.56 400
T76 - - - - 2-1/2 - 2.395 60.84 2.602 66.09 2.333 59.26 2.540 64.52 1.03 26.16 2.81 71.38 100
T77 - - - - - - 2.480 62.99 2.644 67.16 2.418 61.42 2.582 65.59 .63 16.00 2.78 70.61 200
T78 - - - - - - 2.307 58.60 2.650 67.31 2.245 57.03 2.588 65.74 1.25 31.75 2.78 70.61 100
T79 - - - - - - 2.561 65.05 2.690 68.33 2.497 63.42 2.626 66.70 .75 19.05 2.88 73.15 100
9
Tapered Caps and Plugs (continued from previous page)
T Series Red LD Polythene Part Number
To Plug Thread sizes
NPT Stan- BSP dard Metric
To Cap Thread Sizes
NPT Stan- BSP dard Metric
Dimensions
A B C D E F PLUG CAP Inches Metric Inches Metric Inches Metric Inches Metric Inches Metric Inches Metric
Bag Quantity
T80 - - - - - - 2.457 62.41 2.750 69.85 2.395 60.84 2.688 68.28 1.00 25.40 2.88 73.15 100
T81 2-1/2 - - - - - 2.641 67.08 2.790 70.87 2.579 65.51 2.728 69.29 .75 19.05 2.94 74.68 100
T83 - 3 - - - - 2.849 72.37 2.980 75.69 2.787 70.79 2.918 74.12 .75 19.05 3.25 82.55 100
T84 M75,M76 - - 2-1/2 - - 2.760 70.11 2.990 75.95 2.685 68.20 2.947 74.86 1.00 25.40 3.13 79.51 100
T85 - - - - - - 2.975 75.57 3.103 78.82 2.915 74.04 3.041 77.24 .75 19.05 3.34 84.84 100
T86 - - - - - - 2.996 76.10 3.159 80.24 2.916 74.07 3.079 78.21 .47 11.94 3.41 86.61 100
T88 - - - - - - 2.982 75.75 3.245 82.43 2.912 73.97 3.175 80.65 1.00 25.40 3.38 85.86 100
T89 - - - - - - 3.090 78.49 3.370 85.60 3.020 76.71 3.300 83.82 1.00 25.40 3.50 88.90 100
T90 3 - - - - - 3.325 84.46 3.457 87.81 3.245 82.43 3.377 85.78 .75 19.05 3.63 92.21 50
T91 - - - 3 - - 3.270 83.06 3.562 90.48 3.200 81.28 3.492 88.70 1.13 28.70 3.69 93.73 50
T92 - - - - - - 3.470 88.14 3.600 91.44 3.410 86.62 3.540 89.92 .75 19.05 3.88 98.56 100
T93 - - - - - - 3.550 90.17 3.730 94.75 3.480 88.40 3.660 92.97 1.00 25.40 4.00 101.60 50
T94-63 - - - - - - 3.680 93.48 3.800 96.52 3.610 91.70 3.730 94.75 .75 19.05 4.00 101.60 50
T95-56 - - - - 3-1/2 - 3.790 96.27 3.920 99.57 3.710 94.24 3.840 97.54 .75 19.05 4.12 104.65 50
SP33063 - - - - - - 3.675 93.35 3.815 96.90 3.595 91.31 3.735 94.87 1.00 24.40 4.00 101.60 200
T96-59 - - - - 3-1/2 - 3.930 99.83 4.070 103.38 3.860 98.05 4.000 101.60 .75 19.05 4.38 111.26 50
SP33067 - - - - - - 3.932 99.87 4.128 104.85 3.868 98.25 4.065 103.25 1.12 28.58 4.25 107.95 200
T97 - - - - - - 4.020 102.11 4.140 105.16 3.940 100.08 4.070 103.38 .75 19.05 4.53 115.07 50
T98 - - - - 4 - 4.270 108.46 4.430 112.53 4.180 106.18 4.340 110.24 .88 22.35 4.88 123.96 50
T99 - - - - 4 - 4.370 110.00 4.620 117.35 4.290 108.97 4.540 115.32 1.00 25.40 5.00 127.01 50
TX100 - - - - - - 4.640 117.86 4.850 123.19 4.570 116.08 4.780 121.42 .88 22.35 5.25 133.36 50
TX101 - - - - - - 4.910 124.72 5.090 129.29 4.830 122.69 5.010 127.26 1.00 25.40 5.50 139.71 50
TX102 - - - - - - 5.330 135.39 5.490 139.45 5.210 132.34 5.370 136.40 .88 22.35 5.88 149.36 50
TX103 - - - - 5 - 5.470 138.94 5.620 142.75 5.390 136.91 5.540 140.72 1.00 25.40 6.13 155.71 50
TX104 - - - - - - 5.700 144.79 5.870 149.10 5.610 142.50 5.790 147.07 .98 24.89 6.25 158.76 50
TX105 - - - - - - 6.010 152.66 6.180 156.98 5.920 150.37 6.100 154.95 1.00 25.40 6.62 168.15 50
TX106 - - - - 6 - 6.400 162.57 6.560 166.63 6.330 160.79 6.490 164.85 .87 22.10 6.94 176.28 20
TX107 - - - - 6 - 6.610 169.90 6.710 170.44 6.530 165.87 6.630 168.41 1.50 38.10 7.19 182.63 20
10
Tapered Caps and Plugs (continued from previous page)
T Series Red LD Polythene Part Number
To Plug Thread sizes
NPT Stan- BSP dard Metric
To Cap Thread Sizes
NPT Stan- BSP dard Metric
Dimensions
A B C D E F PLUG CAP Inches Metric Inches Metric Inches Metric Inches Metric Inches Metric Inches Metric
Bag Quantity
TX108 - - - - - - 7.050 179.08 7.120 180.86 6.970 177.04 7.060 179.33 1.00 25.40 7.63 193.81 20
TX109 - - - - - - 7.340 186.44 7.650 194.32 7.260 184.41 7.560 192.03 1.00 25.40 7.94 201.68 20
TX110 - - - - - - 7.660 194.57 7.840 199.14 7.580 192.54 7.760 197.11 1.00 25.40 8.12 206.26 20
TX111 - - - - - - 7.970 202.45 8.140 206.76 7.880 200.16 8.050 204.48 1.00 25.40 8.38 212.86 20
TX112 - - - - - - 8.670 220.23 8.730 221.75 8.550 217.18 8.600 218.45 1.50 38.10 9.13 231.91 10
TX113 - - - - - - 9.970 253.24 10.220 259.59 9.820 249.43 10.080 256.03 .97 24.64 10.56 268.22 15
Back to Contents
11
ElectricalConnector Caps
C Series Red LD Polythene
Part
Number
To Cap
Thread Size
NAS-813
A
Inches Metric
Dimensions C
Inches Metric
D
Inches Metric
Box
Quantity C02 1/2 -8 .480 12.19 .50 12.70 .54 13.72 1,000
C06 5/8 -10 .605 15.37 .50 12.70 .66 16.89 1,000
C08 3/4 -12 .720 18.39 .50 12.70 .77 19.68 1,000
C10 7/8 -14 .850 20.83 .50 12.70 .90 22.99 1,000
C12 1 -16 .973 24.71 .50 12.70 1.03 26.29 500
C14 1-1/8 -18 1.093 27.76 .56 14.22 1.15 29.35 500
C16 1-3/16 - 1.188 30.18 .56 14.22 1.23 31.24 500
C18 1-1/4 -20 1.231 31.27 .56 14.22 1.30 33.05 500
C20 1-3/8 -22 1.340 34.04 .56 14.22 1.41 35.81 500
C22 1-7/16 - 1.428 36.27 .56 14.22 1.46 37.08 200
C24 1-1/2 -24 1.463 37.16 .56 14.22 1.53 38.94 500
C26 1-3/4 -28 1.715 43.56 .56 14.22 1.79 45.47 200
C28 2 -32 1.965 49.91 .56 14.22 2.04 51.82 200
C30 2-1/4 -36 2.215 56.26 .60 15.24 2.29 58.17 200
C32 2-1/2 -40 2.456 62.38 .62 15.75 2.52 64.01 200
C34 2-3/4 - 2.720 69.09 .60 15.24 2.81 71.42 100
C36 3 - 2.960 75.18 .60 15.24 3.05 77.47 100
C38 4 - 3.940 100.08 1.00 25.40 4.00 101.60 40
C40 5 - 4.944 125.58 1.25 31.75 5.00 127.00 30
Back to Contents
Straight-sided, thin-wall closures designed to protect threaded connectors. Flanged end allows removal in hard-to-reach areas. Versatile design protects a variety of threaded and non-threaded applications. Applicable Spec: NAS-813 MS-90376
12
Electrical Connector Plugs
E Series Yellow LD Polythene
Part
Number
Standard
Thread Size
NAS-820
A
Inches Metric
B
Inches Metric
C
Inches Metric
D
Inches Metric
Box
Quantity
E02 1/2 -8A .483 12.27 .41 10.41 .63 16.00 .67 17.02 1,000
E06 5/8 -10A .595 15.11 .53 13.46 .63 16.00 .75 19.05 1,000
E10 3/4 -12A .715 18.16 .66 16.76 .63 16.00 .86 21.84 1,000
E12 7/8 -14A .845 21.46 .79 20.07 .63 16.00 1.03 26.16 1,000
E14 1 -16A .963 24.46 .89 22.61 .63 16.00 1.12 28.45 1,000
E16 1-1/8 -18A 1.088 27.64 1.03 26.16 .63 16.00 1.25 31.75 500
E18 1-1/4 -20A 1.215 30.86 1.15 29.21 .63 16.00 1.40 35.56 500
E20 1-3/8 -22A 1.349 34.26 1.289 32.74 .63 16.00 1.50 38.10 300
E22 1-1/2 -24A 1.460 37.08 1.39 35.31 .55 13.97 1.64 41.66 200
E24 1-3/4 -28A 1.718 43.64 1.68 42.67 .63 16.00 1.87 47.49 200
E26 2 -32A 1.970 50.04 1.89 48.01 .63 16.00 2.13 54.10 200
E28 2-1/4 -36A 2.210 56.13 2.14 54.36 .63 16.00 2.34 59.44 200
E30 2-1/2 - 2.450 62.23 2.38 60.45 .63 16.00 2.60 66.04 200
Back to Contents
Straight-sided, thin-wall closures designed to protect threaded connectors. Flanged
end makes for easy removal in hard-to reach areas. Versatile design will protect a
variety of threaded and non-threaded applications.
Applicable Spec: NAS-820
13
Non-Threaded Caps and Plugs Wide-Flange
WF Series Yellow LD Polythene Part Number
NPT/ BSP
To Plug Thread sizes
Inches Metric
NPT/ BSP
To Cap Thread Sizes
Inches Metric
Dimensions
A B C D E F PLUG CAP Inches Metric Inches Metric Inches Metric Inches Metric Inches Metric Inches Metric
Bag Quantity
WF01 - - - - - - .116 2.95 .182 4.62 .053 1.35 .120 3.05 .37 9.40 .50 12.70 1,000
WF02 - - M6 - - M4 .173 4.39 .240 6.10 .111 2.82 .177 4.50 .37 9.40 .56 14.22 1,000
WF03 - - - - - - .236 5.99 .296 7.52 .174 4.42 .225 5.72 .31 7.87 .62 15.75 1,000
WF04 - 3/8 - - 15/64 - .299 7.59 .365 9.27 .235 5.97 .302 7.67 .31 7.87 .68 17.27 1,000
WF05 1/8 - M10 - - M8 .333 8.46 .392 9.96 .269 6.83 .319 8.10 .31 7.87 .72 18.29 1,000
WF06 - 7/16 - - - - .367 9.32 .418 10.62 .298 7.57 .354 8.99 .31 7.87 .75 19.05 1,000
WF07 - - M12 1/8 3/8 M10 .397 10.08 .447 11.35 .328 8.33 .383 9.73 .31 7.87 .78 19.81 1,000
WF08 1/4 1/2 - 1/8 - - .427 10.85 .475 12.07 .356 9.04 .409 10.39 .31 7.87 .81 20.57 1,000
WF09 - - - - - - .435 11.05 .509 12.93 .365 9.27 .450 11.43 .47 11.94 .83 21.08 2,000
WF09-2 - - M14 - 7/16 - .460 11.68 .500 12.70 .396 10.06 .444 11.28 .38 9.65 .75 19.05 1,200
WF10 - 9/16 - - 1/2 M12 .481 12.22 .547 13.89 .409 10.39 .493 12.52 .37 9.40 .87 22.10 1,000
WF11 - 5/8 M16 1/4 - - .530 13.46 .615 15.62 .468 11.89 .547 13.89 .37 9.40 .94 23.88 1,000
WF11-2 3/8 - - - 9/16 M14 .560 14.22 .631 16.03 .497 12.62 .579 14.71 .47 11.94 .97 24.64 1,300
WF12 - - M18 - 5/8 M16 .590 14.99 .667 16.94 .518 13.16 .605 15.37 .44 11.18 1.00 25.40 1,000
WF13 - - - - - - .610 15.49 .687 17.45 .548 13.92 .635 16.13 .44 11.18 1.03 26.16 1,000
WF14 - 3/4 M18-M20 - - - .628 15.95 .725 18.42 .558 14.17 .667 16.81 .44 11.18 1.06 26.92 1,000
Engineered with wider and thicker flange design for added protection and security. This versatile
part can be used as a cap or plug.
When used as plug “B” dimension should be at least .020” larger than diameter to be plugged .
Larger diameters may require more interference.
When used as a cap “C” dimension should be at least .020” less than diameter to be capped.
Larger diameters may require more interference.
Applicable Spec: NAS-816
14
Non-Threaded Caps and Plugs Wide-Flange (continued from previous page)
WF Series Yellow LD Polythene Part Number
NPT/ BSP
To Plug Thread sizes
Inches Metric
NPT/ BSP
To Cap Thread Sizes
Inches Metric
Dimensions
A B C D E F PLUG CAP Inches Metric Inches Metric Inches Metric Inches Metric Inches Metric Inches Metric
Bag Quantity
WF15 - - M20 3/8 - - .658 16.71 .750 19.05 .588 14.94 .687 17.45 .44 11.18 1.09 27.69 1,000
WF16 1/2 - - - - M18 .690 17.53 .775 19.69 .620 15.75 .721 18.31 .47 11.94 1.12 28.45 1,000
WF17 - - M22 - 3/4 - .725 18.42 .812 20.62 .663 16.84 .761 19.33 .50 12.70 1.16 29.46 1,000
WF18 - - - - - - .755 19.18 .870 22.10 .693 17.60 .808 20.52 .50 12.70 1.18 29.97 1,000
WF19 - - - - 7/8 - .820 20.83 .930 23.62 .755 19.18 .865 21.97 .53 13.46 1.25 31.75 500
WF20 - - - - - - .825 20.96 .929 23.60 .763 19.38 .878 22.30 .56 14.22 1.25 31.75 500
WF21 3/4 - - - - M22 .866 22.00 .976 24.79 .804 20.42 .925 23.50 .65 16.51 1.81 45.97 500
WF22 3/4 1-1/16 M26,M27 5/8 - M24 .915 23.24 1.035 26.29 .840 21.34 .960 24.38 .63 16.00 1.34 34.04 500
WF23 - - - - - - .984 24.99 1.105 28.07 .918 23.34 1.040 26.42 .66 16.76 1.44 36.58 500
WF24-2 7/8 - M25 - - M27,M28 1.150 29.21 1.284 32.61 1.080 27.43 1.220 30.99 .75 19.05 1.56 39.62 300
WF25 1 1-5/16 M32,M33 7/8 - M30 1.180 29.97 1.314 33.38 1.115 28.32 1.260 32.00 .75 19.05 1.56 39.62 300
WF26 - - M35,M36 - - M32, M33 1.236 31.39 1.382 35.10 1.166 29.62 1.324 33.63 .75 19.05 1.69 42.93 300
WF27 - - - - - - 1.312 33.32 1.465 37.21 1.248 31.70 1.417 35.99 .93 23.62 1.84 46.74 200
WF27-2 - - - - - - 1.312 33.32 1.466 37.24 1.249 31.72 1.427 36.25 .78 19.81 1.84 46.74 200
WF28 - - - - - - 1.452 36.88 1.604 40.74 1.378 35.00 1.552 39.42 .75 19.05 1.95 49.28 200
WF29 1-1/4 - M39,M40,M42 - 1-1/8 M38 1.580 40.13 1.714 43.54 1.515 38.48 1.649 41.88 .63 19.05 2.06 52.32 200
WF30 1-1/2 1-7/8 M48 - - M45 1.730 43.94 1.888 47.96 1.650 41.91 1.828 46.43 .75 19.05 2.31 58.67 100
WF31 - - M48 1-1/2 1-7/8 - 1.810 45.97 1.975 50.17 1.731 43.97 1.916 48.67 .75 19.05 2.38 60.45 100
1064 - - - - - - 1.900 48.26 1.990 50.55 1.780 45.21 1.870 47.50 .57 14.48 2.34 59.44 500
WF32 - - - 1-1/2 - - 1.850 46.99 2.020 51.31 1.788 45.42 1.973 50.11 1.12 28.45 2.44 61.98 100
WF33 - - - - - - 1.927 48.95 2.058 52.27 1.857 47.17 1.988 50.50 .63 16.00 2.38 60.45 200
WF34 - 2-1/4 M55,M56 1-3/4 - M52 2.067 52.50 2.243 56.97 2.005 50.93 2.197 55.80 1.12 28.45 2.69 68.33 200
WF34-2 - - - - - - 2.072 52.63 2.263 57.48 2.010 51.05 2.218 56.34 1.12 28.45 2.69 68.33 50
WF35 2 - M58,M60 - 2-1/4 M58 2.136 54.25 2.312 58.72 2.074 52.68 2.265 57.53 1.12 28.45 2.75 69.85 50
WF36 - - M60,M62 2 - M60 2.298 58.37 2.464 62.59 2.235 56.77 2.416 61.37 1.12 28.45 2.88 73.15 50
WF37 - - - - 2-1/2 - 2.395 60.83 2.602 66.09 2.333 59.26 2.556 64.92 1.25 31.75 3.00 76.20 50
WF38 - - - - - - 2.305 58.55 2.620 66.55 2.245 57.02 2.583 65.61 1.00 25.40 3.06 77.72 60
15
Non-Threaded Cap and Plugs Wide-Flange (continued from previous page)
WF Series Yellow LD Polythene Part Number
NPT/ BSP
To Plug Thread sizes
Inches Metric
NPT/ BSP
To Cap Thread Sizes
Inches Metric
Dimensions
A B C D E F PLUG CAP Inches Metric Inches Metric Inches Metric Inches Metric Inches Metric Inches Metric
Bag Quantity
WF39 - - - - - - 2.475 62.87 2.725 69.22 2.405 61.09 2.677 68.00 1.37 34.80 3.16 80.26 50
WF40 2-1/2 - - - - - 2.638 67.01 2.759 70.08 2.568 65.23 2.704 68.68 .81 20.57 3.21 81.53 50
WF41 - - M75,M76 2-1/2 - - 2.685 68.20 2.955 75.06 2.623 66.62 2.917 74.09 1.12 28.45 3.44 87.38 50
WF42 - - - - - - 2.994 76.05 3.150 80.01 2.924 74.27 3.097 78.66 .87 22.10 3.59 91.19 250
WF43 - - - - - - 2.990 75.95 3.250 82.55 2.920 74.17 3.202 81.33 1.12 28.45 3.75 95.25 50
WF44 - - - - - - 3.225 81.92 3.562 90.47 3.154 80.11 3.515 89.28 1.25 31.75 4.00 101.60 150
WF45 - - - - - - 3.324 84.43 3.458 87.83 3.244 82.40 3.398 86.31 .87 22.10 3.88 98.55 40
WF52 3-1/2 - - 3-1/2 - - 3.347 85.01 3.486 88.54 3.265 82.93 3.418 86.82 .87 22.10 3.91 99.31 40
WF46 3-1/2 - - 3-1/2 - - 3.790 96.27 3.920 99.57 3.710 94.23 3.840 97.54 .75 19.05 4.34 110.24 50
Back to Contents
16
Interrupted-Bead Plugs
IB Series Black LD Polythene
Part
Number
To Plug NPT Thread
Size
To Plug SEA Thread
Size
Dimensions Box
Quantity A
Inches Metric C
Inches Metric
IB 6 1/8 3/8 8.05 .317 6.10 .24 1,000
IB 7 - 7/16 9.40 .370 6.86 .27 1,000
IB 8 1/4 1/2 11.28 .444 6.86 .27 1,000
IB 9 - 9/16 12.70 .500 7.37 .29 1,000
IB 10 3/8 5/8 14.17 .558 7.37 .29 1,000
IB 12 - 3/4 17.30 .681 7.37 .29 1,000
IB 14 - 7/8 20.24 .797 7.37 .29 1,000
IB 16 3/4 1 23.32 .918 6.35 .25 1,000
IB 17 - 1-1/16 24.74 .974 6.35 .25 900
Back to Contents
All the advantage of a threaded plug without the threading
action. Snaps into fittings to seal out contaminants and
provide an attractive finish. Interrupted external bead grips
threads yet strips out without shredding
17
Non-Threaded Caps Tube Caps
Tube Caps Red LD Polythene
Part
Number
To Cap Diameter A
Dimensions C
Box
Quantity Inches Metric Inches Metric 211-B 1/8 3.10 .625 15.90 1,000
211-L 1/8 3.18 .75 19.05 5,000
212-C 5/32 3.90 .625 15.90 800
212-S 11/64 4.37 .62 15.75 2,000
213-S 3/16 4.78 .47 11.94 5,000
213-D 3/16 4.70 .625 15.90 800
213-R 13/64 5.16 .62 15.75 3,000
214-S 1/4 6.35 .50 12.70 3,000
214-E 1/4 6.30 .875 22.20 900
1805 5/16 7.92 .38 9.65 3,600
215-F 5/16 7.80 .875 22.20 1,200
216-T 3/8 9.53 .46 11.68 4,000
216-H 3/8 9.53 .888 22.35 1,000
216-L 3/8 9.53 1.12 28.45 1,500
1030 27/64 10.72 1.25 31.75 1,000
773 7/16 11.11 .22 5.59 3,000
1031 7/16 11.11 .50 12.70 1,000
217 7/16 11.11 .88 22.35 1,000
Designed to protect the ends of threaded and non-threaded tubing, rods or packaging tubes
with a friction-fit straight-walled design. Will fit diameters matching inside dimensions
where applicable. Used extensively for masking during painting, plating and sandblasting
operations.
Available in various lengths.
Applicable spec: MIL-C-5501/9, MIL-C-52078, NAS 844
18
Non-Threaded Caps Tube Caps (continued from previous page)
Tube Caps Red LD Polythene
Part
Number
To Cap Diameter A
Dimensions C
Box
Quantity Inches Metric Inches Metric 217-L 7/16 11.11 1.5 38.10 1,000
218-S 1/2 12.70 .50 12.70 1,000
218 1/2 12.70 .88 22.35 1,000
219-S 9/16 14.27 .62 15.75 1,500
219 9/16 14.29 .88 22.35 1,000
220 5/8 15.88 .88 22.35 1,000
981 5/8 15.88 .88 22.35 1,000
220-U 5/8 15.88 1.50 38.10 400
1834 5/8 15.88 2.50 63.50 200
220-H 5/8 15.88 .94 23.88 1,000
221 11/16 17.46 .88 22.35 1,000
221-S 11/16 17.48 .75 19.05 1,000
222-S 3/4 19.05 .38 9.65 1,500
222 3/4 19.05 .88 22.35 1,000
222-H 3/4 19.05 .94 23.88 500
222-L 3/4 19.05 2.47 62.74 800
835 13/16 20.65 .69 17.53 700
223 13/16 20.64 .88 22.35 1,000
201-T 7/8 22.23 .62 15.75 500
201-S 7/8 22.23 .62 15.75 700
201 7/8 22.23 .88 22.35 1,000
201-M 7/8 22.23 1.75 44.45 200
748 29/32 23.00 .75 19.05 500
1202 29/32 28.83 .88 22.35 500
1784 1 25.40 .50 12.70 700
2003 1 25.40 .50 12.70 700
19
Non-Threaded Caps Tube Caps (continued from previous page)
Tube Caps Red LD Polythene
Part
Number
To Cap Diameter A
Dimensions C
Box
Quantity Inches Metric Inches Metric 1364 1 25.40 .62 15.75 400
138 1 25.40 .75 19.05 500
138-2 1 25.40 1.00 25.40 500
138-L 1 25.40 1.75 44.45 200
448 1-1/16 26.99 1.00 25.40 500
224 1-1/8 28.58 .88 22.35 300
289-S 1-1/4 31.75 .50 12.70 400
289 1-1/4 31.75 1.00 25.40 400
289-M 1-1/4 31.75 1.50 38.10 140
289-L 1-1/4 31.75 1.75 44.45 100
1783 1-5/16 33.34 1.00 25.40 200
760 1-3/8 35.00 .62 15.75 200
225 1-3/8 34.92 1.00 25.40 200
428 1-3/8 35.00 1.50 38.10 100
428-2 1-3/8 35.00 1.59 40.39 100
290 1-1/2 38.10 1.00 25.40 200
290-L 1-1/2 38.10 1.75 44.45 100
291 1-5/8 41.28 1.00 25.40 200
291-L 1-5/8 41.28 1.25 31.75 100
291-2 1-23/32 43.65 1.00 25.40 100
1008 1-3/4 44.45 .88 22.35 100
1008-1 1-3/4 44.45 1.00 25.40 200
291-3 1-27/32 46.84 1.21 30.73 100
1699 1-7/8 47.63 1.00 25.40 200
226 2 50.80 1.00 25.40 200
20
Non-Threaded Caps Tube Caps (continued from previous page)
Tube Caps Red LD Polythene
Part
Number
To Cap Diameter A
Dimensions C
Box
Quantity Inches Metric Inches Metric 226-L 2 50.80 1.53 38.86 50
1025 2-1/8 53.98 .50 12.70 200
327 2-1/8 53.98 1.00 25.40 100
230 2-1/4 57.15 .88 22.35 100
1365 2-1/4 57.15 1.00 25.40 60
227 2-1/2 63.50 .88 22.35 100
372 2-39/64 66.27 1.00 25.40 200
374 2-5/8 66.68 1.00 25.40 100
232 2-3/4 69.85 1.00 25.40 100
387 3 76.20 1.00 25.40 90
373 3-1/8 79.38 1.38 35.05 50
1528 3-1/4 82.55 1.00 25.40 160
1563 3-7/16 87.31 1.00 25.40 140
1521 3-1/2 88.90 1.00 25.40 120
2215 3-17/32 89.69 2.00 50.80 60
1540 4 101.60 1.13 28.70 100
1400 4-13/16 122.25 .64 16.26 100
1363 4-7/8 123.83 .92 23.37 70
324-3 8 203.20 2.30 58.42 8
Back to Contents
21
Non-Threaded Plugs Lift Tab Tapered Plugs
ST Series Red LD Polyethylene
Part Number
NPT/ BSP
To Plug Thread Sizes Standard Metric
Dimensions Box
Quantity A
Inches Metric B
Inches Metric C
Inches Metric D
Inches Metric ST236-X - - - .236 5.99 .302 7.67 .44 11.18 .38 9.65 1,000
ST236-L - - - .267 6.78 .335 8.51 .47 11.94 .38 9.65 1,000
ST237-Y - 3/8 M10/M10X1.25 .299 7.59 .365 9.27 .50 12.70 .38 9.65 1,000
ST229-Z 1/8 - - .330 8.38 .396 10.06 .53 13.46 .38 9.65 1,000
ST238-D - 7/16 M12 .361 9.17 .427 10.85 .56 14.22 .38 9.65 1,000
ST181 1/4 1/2 M14 .419 10.64 .485 12.32 .62 15.75 .38 9.65 1,000
ST240 - - M14X1.5 .447 11.35 .513 13.03 .66 16.76 .38 9.65 1,000
ST189 - 9/16 - .471 11.96 .547 13.89 .69 17.53 .44 11.18 1,000
ST189-2 - - - .500 12.70 .576 14.63 .72 18.29 .44 11.18 1,000
ST241 - - M16 .532 13.51 .608 15.44 .75 19.05 .44 11.18 1,000
ST188 3/8 - M18 .550 13.97 .631 16.03 .75 19.05 .47 11.94 1,000
ST242 - - M18X1.5 .580 14.73 .667 16.94 .81 20.57 .50 12.70 1,000
ST242-2 - - - .610 15.49 .695 17.65 .84 21.34 .50 12.70 1,000
ST243 - 3/4 M20 .643 16.33 .726 18.44 1.03 26.16 .50 12.70 1,000
ST191 - - M20X1.5 .675 17.15 .755 19.18 .88 22.35 .50 12.70 1,000
ST203 1/2 - M22 .690 17.53 .788 20.02 .94 23.88 .56 14.22 1,000
ST245 - - M22X1.5 .725 18.42 .823 20.91 .97 24.64 .56 14.22 1,000
This tapered plug features a side-tab design that extends above the flange making it easy to
grasp and remove from a variety of threaded and non-threaded fittings. Great for use in hard-
to-reach locations.
22
Non-Threaded Plugs Lift Tab Tapered Plugs (continued from previous page)
ST Series Red LD Polyethylene
Part Number
NPT/ BSP
To Plug Thread Sizes
Dimensions Box
Quantity Standard Metric
A Inches Metric
B Inches Metric
C Inches Metric
D Inches Metric
ST246 - 7/8 M24 .750 19.05 .848 21.54 1.00 25.40 .56 14.22 1,000
ST204 - - M24X2 .802 20.37 .911 23.14 1.06 26.93 .62 15.75 1,000
ST247 - - - .815 20.70 .930 23.62 1.09 27.69 .62 15.75 1,000
ST192-2 3/4 - M27 .866 21.99 .975 24.77 1.12 28.45 .62 15.75 1,000
ST248 - 1-1/16 M27X12 .915 23.24 1.040 26.42 1.16 29.47 .68 17.27 1,000
ST249 - - M30X2 .964 24.49 1.090 27.69 1.25 31.75 .75 19.05 500
ST153 - - M30X2 .995 25.27 1.145 29.08 1.31 33.28 .75 19.05 500
ST193 1 - M33 1.094 27.79 1.215 30.86 1.41 35.82 .75 19.05 500
ST250 - 1-5/16 M33X2 1.179 29.95 1.286 32.66 1.44 36.58 .75 19.05 300
ST205 - - - 1.235 31.37 1.360 34.55 1.50 38.10 .81 20.57 500
ST254 1-1/4 - M36X3 1.451 36.86 1.601 40.67 1.75 44.45 .75 19.05 200
ST255 - - - 1.633 41.48 1.750 44.45 1.84 46.74 .75 19.05 150
Back to Contents
23
Non-Threaded Plugs Centre Pull-Tab Tapered Plugs
P Series Red LD Polyethylene
Part Number
NPT/ BSP
To Plug Thread Size Dimensions Box
Quantity Standard Metric
A Inches Metric
B Inches Metric
C Inches Metric
D Inches Metric
235-VP - 5/16-24 M7 .209 5.31 .269 6.83 .38 9.65 .34 8.64 1,000
236-XP - - M8/M8X1 .239 6.07 .303 7.70 .47 11.94 .38 9.65 1,000
236-LP - - - .267 6.78 .335 8.51 .47 11.94 .41 10.41 1,000
237-YP - 3/8-24 M10/M10X1.25 .299 7.59 .367 9.32 .50 12.70 .38 9.65 1,000
229-ZP 1/8 - - .331 8.41 .397 10.08 .56 14.22 .38 9.65 1,000
238-DP - 7/16-20 M12 .362 9.19 .428 10.87 .56 14.22 .38 9.65 1,000
239-EP - - M12X1.25 .392 9.96 .459 11.66 .59 14.99 .41 10.41 1,000
181-P 1/4 1/2-20 M14 .422 10.72 .486 12.34 .62 15.75 .41 10.41 1,000
189-P - 9/16-18 - .472 11.99 .548 13.92 .69 17.53 .47 11.94 1,000
189-2-P - - M16 .500 12.70 .568 14.43 .72 18.29 .47 11.94 1,000
241-P - 5/8-18 - .533 13.54 .608 15.44 .75 19.05 .47 11.94 1,000
188-P 3/8 - M18 .550 13.97 .631 16.03 .75 19.05 .50 12.70 1,000
188-SP 3/8 - M18 .580 14.73 .625 15.88 .78 19.81 .22 5.59 1,000
242-P - - M18X1.5 .580 14.73 .688 17.48 .84 21.34 .53 13.46 1,000
242-2-P - - - .610 15.49 .695 17.65 .84 21.34 .53 13.46 1,000
243-P - 3/4-16 M20 .640 16.26 .727 18.47 .88 22.35 .50 12.70 1,000
191-P - - M20X1.5 .678 17.22 .755 19.18 .88 22.35 .53 13.46 1,000
This tapered plug features a well-engineered centre-pull tab that extends above the flange
area, making it easy to grasp and remove from a variety of threaded and non-threaded
ports. Ideal for fittings with internal o-rings. Centre-pull tab will not break off during
removal.
24
Non-Threaded Plugs Centre Pull-Tab Tapered Plugs (continued from previous page)
P Series Red LD Polyethylene
Part Number
NPT/ BSP
To Plug Thread Size Dimensions Box
Quantity Standard Metric
A Inches Metric
B Inches Metric
C Inches Metric
D Inches Metric
203-P 1/2 - M22 .690 17.53 .788 20.02 .94 23.88 .59 14.99 1,000
203-SP 1/2 - M22 .725 18.42 .770 19.56 .86 21.84 .22 5.59 1,000
245-P - - M22X1.5 .727 18.47 .825 20.96 1.00 25.40 .59 14.99 1,000
246-P - 7/8-14 M24 .752 19.10 .849 21.56 1.00 25.40 .59 14.99 1,000
204-P - - M24X2 .803 20.40 .912 23.16 1.06 26.92 .66 16.76 500
192-1-P 3/4 - M27 .869 22.07 .973 24.71 1.12 28.45 .75 19.05 500
192-2-P 3/4 - M27 .869 22.07 .973 24.71 1.12 28.45 .66 16.76 500
248-P - 1-1/16-12 M27X2 .915 23.24 1.040 26.42 1.16 29.46 .72 18.29 1,000
249-P - - M30 .967 24.56 1.092 27.74 1.25 31.75 .78 19.81 300
153-P - - M30X2 1.026 26.06 1.146 29.11 1.34 34.04 .75 19.05 300
193-P 1 - M33 1.093 27.76 1.219 30.96 1.41 35.81 .78 19.81 300
193-SP 1 - M33 1.100 27.94 1.210 30.73 1.34 34.04 .50 12.70 500
250-P - 1-5/16-12 M33X2/M36 1.179 29.95 1.286 32.66 1.44 36.58 .75 19.05 300
205-P - - - 1.235 31.37 1.360 34.54 1.53 38.86 .75 19.05 200
252-P - - - 1.292 32.82 1.356 34.44 1.50 38.10 .78 19.81 300
253-P - - M39/M39X3 1.312 33.32 1.465 37.21 1.62 41.15 .75 19.05 200
253-1-P - - - 1.344 34.14 1.527 38.79 1.75 44.45 .88 22.35 200
381-P - - - 1.360 34.54 1.420 36.07 1.72 43.69 .53 13.46 300
254-P 1-1/4 - - 1.451 36.86 1.601 40.67 1.75 44.45 .75 19.05 200
255-P - - - 1.633 41.48 1.750 44.45 1.94 49.28 .78 19.81 200
206-P - - - 1.807 45.90 1.785 45.31 1.94 49.28 .50 12.70 200
273-P - - - 1.735 44.07 1.815 46.10 2.81 71.37 .50 12.70 700
197-P 1-1/2 - - 1.820 46.23 1.835 46.61 2.03 51.56 .50 12.70 200
25
Non-Threaded Plugs Centre Pull-Tab Tapered Plugs (continued from previous page)
P Series Red LD Polyethylene
Part Number
NPT/ BSP
To Plug Thread Size Dimensions Box
Quantity Standard Metric
A Inches Metric
B Inches Metric
C Inches Metric
D Inches Metric
260-P - 2-1/4-12 - 2.067 52.50 2.243 56.97 2.44 61.98 1.03 26.16 70
198-P 2 - - 2.230 56.64 2.270 57.66 2.50 63.50 .50 12.70 200
207-P - 2-1/2-12 - 2.300 58.42 2.464 62.59 2.66 67.56 1.00 25.40 50
199-P 2-1/2 - - 2.698 68.53 2.866 72.80 2.97 75.44 .50 12.70 100
268-P - - - 2.850 72.39 2.982 75.74 3.28 83.31 .75 19.05 50
200-P 3 - - 3.320 84.33 3.452 87.68 3.62 91.95 .75 19.05 50
Back to Contents
26
Cap for Threaded Parts BSP/Gas Caps
SP26000 Series Red LD Polythene
Part
Number
A Overall Length
Inches Metric
B Overall Length
Inches Metric
Tread Size
BSP
Bag
Quantity
SP26001 - 9.50 - 12.90 1/8 10,000
SP26002 0.437 11.10 0.642 14.70 1/4 10,000
SP26003 0.437 11.10 0.780 19.00 3/8 10,000
SP26004 0.531 12.70 0.957 24.60 1/2 5,000
SP26005 0.625 15.70 1.034 25.00 5/8 5,000
SP26006 0.718 18.20 1.173 28.50 3/4 4,000
SP26007 0.750 19.05 1.321 33.55 7/8 2,500
SP26008 0.750 19.80 1.441 38.10 1” 2,000
SP26009 - 20.00 - 44.60 1 1/4 1,000
SP26010 - 50.00 - 28.00 1 1/2 1,500
SP26011 0.843 21.10 2.539 62.20 2” 1,000
SP26012 1.000 25.40 2.779 70.59 2 1/4 500
SP26013 1.125 27.40 3.162 78.00 2 1/2 500
Back to Contents
A full threaded design used in the automotive, gas, hydraulic,
aerospace, pneumatic and engineering industries as a shipping cap
and to prevent the ingress of dirt and other contaminants.
27
Caps for Threaded Parts UNF/JIC Fittings - Caps
SP27000 Red LD Polythene
Part
Number
A Overall Length
Inches Metric
B Overall
Diameter Inches Metric
Thread Size
UNF
Bag
Quantity
SP27002 0.328 8.33 0.503 12.78 3/8 – 24 5,000
SP27003 0.325 8.33 0.565 14.35 7/16 – 24 5,000
SP27004 0.531 13.49 0.565 14.35 7/16 – 20 5,000
SP27006 0.531 13.49 0.699 17.75 9/16 – 18 5,000
SP27007 0.593 15.06 0.762 19.35 5/8 – 18 5,000
SP27008 0.687 17.45 0.887 22.53 3/4 – 16 5,000
SP27010 0.812 20.62 1.012 25.70 7/8 – 14 5,000
SP27012 0.906 23.01 1.200 30.48 1 1/16 – 14 2,000
SP27013 0.750 19.05 1.252 31.80 1 1/16 – 12 2,000
SP27015 0.875 22.23 1.502 38.15 1 5/16 – 12 1,500
SP27017 0.875 22.23 1.815 46.10 1 5/8 – 12 1,000
SP27018 1.000 25.40 2.065 52.45 1 7/8 – 12 1,000
SP27019 1.250 31.75 2.699 68.55 2 1/2 – 12 800
SP27020 0.578 14.68 0.503 12.78 3/8 – 24 5,000
Back to Contents
High quality low cost full thread caps, fit UNF and JIC pats
and are used extensively in the aerospace industry.
28
Caps for Threaded Parts UN/UNS Caps
DC Series Blue HD Polythene
Part
Number
To Cap Thread
Size
Tubing
Size
Dimensions C
Inches Metric
Box
Quantity
DC3 3/8 – 28 3/16 .20 5.08 2,000
DC4 7/16 – 24 1/4 .24 6.10 2,000
DC5 1/2 – 24 5/16 .24 6.10 2,000
DC6 9/16 – 20 3/8 .26 6.60 1,300
DC8 23/32 – 20 1/2 .27 6.86 1,500
DC10 27/32 – 18 5/8 .34 8.64 1,000
DC12 1 – 16 3/4 .38 9.65 700
DC14 1-1/8 – 16 7/8 .40 10.16 600
DC16 1-1/4 – 14 1 .43 10.92 400
DC20 1-33/64 – 1 1-1/4 .43 10.92 300
DC21S 1-37/64 – 14 1-1/4 .43 10.92 300
DC24 1-25/32 – 14 1-1/2 .50 12.70 200
DC25S 1-27/32 – 14 ` 1-1/2 .50 12.70 200
Back to Contents
Originally engineered for use in aircraft and hydraulic equipment
applications. Seals out contaminants while protecting threads.
Rolled threads allow cap to be either pushed or threaded on. Special
threads meet UN and UNS specifications.
29
Caps for Threaded Parts Tear Tab Caps for NPT Threads
TT Series Orange LD Polythene
Part
Number
NPT
Thread Size
Box
Quantity
TT0 1/16 1,000
TT1 1/8 1,000
TT2 1/4 1,000
TT3 3/8 1,000
TT4 1/2 1,000
TT6 3/4 500
TT8 1 500
TT10 1 1/4 400
TT12 1 1/2 200
TT16 2 100
Back to Contents
Protect pipe threads from damage. Easy-to-use Tear Tab Caps employ
friction for snug fit.
To remove, simply pull tear tab and discard.
Fits NPT sizes 1/16 to 2”
30
Plugs for Threaded Parts BSP/Gas Plugs
SP25000 Red LD Polythene
Part
Number
Dimensions
Thread Size
Bag
Quantity A
Overall Length Inches Metric
B Overall Diameter
Inches Metric
SP25001 0.410 10.41 0.640 16.25 1/8 5,000
SP25002 0.520 13.21 0.725 18.41 1/4 5,000
SP25003 0.537 13.64 0.900 22.86 3/8 3,000
SP25004 0.685 17.40 1.120 28.45 1/2 1,000
SP25005 0.735 18.67 1.205 30.61 5/8 1,000
SP25006 0.670 17.02 1.300 33.02 3/4 1,000
SP25007 0.675 17.14 1.565 39.75 1 1,000
Back to Contents
Solid top design offers rugged protection against
transit damage, the ingress of dirt and other
contaminants for BSP and Gas fittings
31
Plugs for Threaded Parts UNF/JIC Plugs
SP29000 Series Red LD Polythene
Part
Number
Dimensions
Thread Size
Bag
Quantity A
Overall Length Inches Metric
B Overall Diameter
Inches Metric
SP29001 0.500 12.70 0.500 12.70 5/16 – 24 5,000
SP29002 0.468 11.88 0.562 14.27 3/8 – 24 5,000
SP29003 0.531 13.49 0.687 17.45 7/16 – 20 5,000
SP29004 0.562 14.27 0.750 19.05 1/2 – 20 5,000
SP29005 0.546 13.87 0.812 20.62 9/16 – 18 5,000
SP29007 0.593 15.06 0.843 21.41 5/8 – 18 5,000
SP29008 0.750 19.05 1.000 25.40 3/4 – 16 4,000
SP29010 0.796 20.22 1.093 27.76 7/8 – 14 3,000
SP29011 0.859 21.82 1.343 34.11 1 1/16 – 12 2,000
SP29012 0.859 21.82 1.404 35.66 1 1/16 – 14 1,500
SP29013 0.890 22.61 1.654 42.01 1 5/16 – 12 1,500
SP29014 0.750 19.05 1.654 42.01 1 5/16 – 14 1,000
SP29015 0.921 23.39 2.123 53.92 1 5/8 – 12 1,000
SP29016 0.906 23.01 2.092 53.14 1 5/8 – 14 1,000
SP29017 1.015 25.78 2.404 61.06 1 7/8 – 12 500
SP29018 1.015 25.78 2.404 61.06 17/8 – 14 500
SP29019 1.218 30.94 3.092 78.54 2 1/2 – 12 500
SP29020 0.562 14.27 0.781 19.84 5/8 UNC 2,000
Back to Contents
Hollow top design to fit all 18 of the popular
American hydraulic UNF and JIC thread forms.
32
Plugs for Threaded Parts BSP/Gas Plugs
SP28000 Red LD Polythene
Part
Number
Dimensions
Thread Size
Bag
Quantity A
Overall Length Inches Metric
B Overall Diameter
Inches Metric
SP28001 0.375 9.53 0.624 15.85 1/8 5,000
SP28002 0.375 6.00 0.812 20.60 1/4 10,000
SP28003 0.453 11.51 0.937 23.80 3/8 5,000
SP28004 0.562 14.27 1.093 27.76 1/2 3,000
SP28005 0.562 14.27 1.187 30.15 5/8 3,000
SP28017 0.594 15.09 1.187 30.15 5/8 2,500
SP28006 0.687 17.45 1.375 34.93 3/4 2,000
SP28007 0.656 16.66 1.375 34.93 7/8 1,500
SP28008 0.750 19.05 1.562 39.67 1 1,500
SP28009 0.718 18.24 1.937 49.20 1 ¼ 1,000
SP28010 0.781 19.83 2.375 60.33 1 ½ 1,000
SP28011 0.781 19.83 2.687 68.25 2 1,000
SP28012 1.000 25.40 3.312 84.12 2 1/4 1,000
SP28013 1.312 33.32 3.687 93.65 2 1/2 200
SP28014 1.375 34.93 3.687 93.65 3 200
Back to Contents
Hollow top design provides ideal low
cost protection for BSP/Gas fittings.
33
Plugs for Threaded Parts BSP Slotted Plugs
BSP Plugs Red & Yellow HD Polythene
Part
Number
BSP Thread
Size
A
Metric
B
Metric
C
Metric
Bag
Quantity
BSP01 1/8 9.0 21.0 5.0 9,000
BSP02 1/4 9.0 21.0 5.0 7,000
BSP03 3/8 10.0 23.0 6.0 4,000
BSP04 1/2 12.0 33.7 6.0 3,000
Plugs for Threaded Parts Metric Slotted Plugs
Metric Red & Yellow HD Polythene
Part
Number
To Plug Metric
Thread Size
A
Metric
B
Metric
C
Metric
Bag
Quantity
MP12 M12 X 1.5 9.0 21.0 5.0 4,500
MP14 M14 X 1.5 9.0 21.0 5.0 5,000
MP16 M16 X 1.5 10.0 23.0 6.0 5,000
MP18 M18 X 1.5 10.0 23.0 6.0 5,000
MP20 M20 X 1.5 12.0 28.0 6.0 3,000
MP22 M22 X1.5 12.0 28.0 6.0 3,000
Designed to protect BSP/Gas fittings from contaminants or
damage. Series can be tightened by hand, hex wrench or screw
driver.
Will meet low-pressure testing requirements.
Designed to protect metric threads from damage and contaminants.
Knurled head and screwdriver slot make for easy application
34
Plugs for Threaded Parts Metric General Purpose Plugs
TM Series Yellow HD Polythene
Part
Number
To Plug Metric
Thread Size
Dimensions Box
Quantity A
Metric B
Metric C
Metric
TM12 M12 X 1.5 8.89 21.08 5.08 1,600
TM14 M14 X 1.5 8.89 2108 5.08 1,600
TM16 M16 X 1.5 9.91 23.11 6.10 1,000
TM18 M18 X 1.5 9.91 23.11 6.10 1,000
TM20 M20 X 1.5 11.94 27.94 6.10 600
TM22 M22 X 1.5 11.94 27.94 6.10 600
Back to Contents
Designed to protect metric threads. Knurled head and
screwdriver slot make for easy application.
35
Plugs for Threaded Parts BSP Sealing Plugs
BT Series Yellow Nylon 6
Part
Number
To Plug BSP
Thread Size
Dimensions Box
Quantity A
Metric B
Metric C
Metric
BT0250 G1/4 9.00 19.20 10.00 7,000
BT0375 G3/8 9.00 22.20 11.00 4,000
BT0500 G1/2 12.00 27.20 13.00 2,500
BT0750 G3/4 12.00 32.30 13.00 1,600
BT1000 G1 15.00 40.00 14.00 900
BT1250 G1-1/4 15.00 50.40 15.00 550
BT1500 G1-1/2 15.00 55.40 15.00 450
BT2000 G2 15.00 68.40 15.00 250
Back to Contents
Designed to protect BSP fittings, with five complete threads
to provide a tight fit. Can be applied or removed with tools
or by hand.
36
Plugs for Threaded Part Metric Sealing Plugs
MT Series Yellow Nylon 6
Part
Number
To Plug Metric
Thread Sizes
Dimensions Box
Quantity A
Metric B
Metric C
Metric
MT10 M10 X 1 7.11 14.22 9.91 2,000
MT12 M12 X 1.5 9.91 17.27 9.91 1,600
MT14 M14 X 1.5 9.91 19.30 9.91 1,200
MT16 M16 X 1.5 9.91 22.10 9.91 900
MT18 M18 X 1.5 9.91 23.88 10.92 800
MT20 M20 X 1.5 9.91 25.91 13.97 560
MT22 M22 X 1 9.91 27.18 13.97 500
MT26 M26 X 1.5 9.91 32.00 13.97 340
MT27 M27 X 2 12.95 32.26 13.97 300
MT33 M33 X 2 12.95 40.39 13.97 180
Back to Contents
Designed to protect metric fittings. With five complete
threads to provide a tight fit. Can be applied or removed by
hand or with tools.
37
UN and UNS Plugs
DP Series Blue HD Polythene
Part Number
To Plug Thread Size
To Plug Tubing Size
Dimensions Box Quantity A
Inches Metric
B Inches Metric
C Inches Metric
DP3 3/8 – 28 3/16 .28 7.11 .44 11.18 .25 6.35 2,000
DP4 7/16 – 24 1/4 .30 7.62 .56 14.22 .31 7.87 1,400
DP5 1/2 – 24 5/16 .30 7.62 .62 15.75 .31 7.87 2,000
DP6 9/16 – 20 3/8 .32 8.13 .69 17.53 .31 7.87 2,000
DP8 23/32 – 20 1/2 .32 8.13 .88 22.35 .31 7.87 1,000
DP10 27/32 – 18 5/8 .40 10.16 1.00 25.40 .31 7.87 700
DP12 1-16 3/4 .42 10.67 1.12 28.45 .31 7.87 500
DP14 1-1/8 – 16 7/8 .45 11.43 1.25 31.75 .25 6.35 500
DP16 1-1/4 – 14 1 .45 11.43 1.38 35.05 .25 6.35 400
DP20 1-33-64 – 14 1-1/4 .45 11.43 1.62 41.15 .25 6.35 200
DP21S 1-37/64 – 14 1-1/4 .46 11.68 1.75 44.45 .25 6.35 200
DP24 1-25/32 – 14 1-1/2 .55 13.97 2.00 50.80 .25 6.35 200
DP25S 1-27/32 – 14 1-1/2 .55 13.97 2.12 53.85 .25 6.35 200
Back to Contents
Originally engineered for use in aircraft and hydraulic equipment applications. Seals out contaminants while protecting threads. Rolled threads allow cap to be either pushed or threaded. Special threads conform to UN and UNS.
38
Flat-Face O-Rings Plugs
FF Series Red LD Polythene
Part Number
To Plug Thread Size
To Plug Tubing Size
Dimensions Box
Quantity A
Inches Metric
B Inches Metric
C Inches Metric
FF6 11/16 – 16 3/8 .44 11.18 .87 22.10 .25 6.35 2,500
FF8 13/16 – 16 1/2 .49 12.45 .94 23.88 .25 6.35 2,500
FF10 1-14 5/8 .59 14.99 1.16 29.47 .25 6.35 500
FF12 1-3/16 – 12 3/4 .63 16.00 1.33 33.78 .25 6.35 500
FF16 1-7/16 – 12 1 .75 19.05 1.63 41.40 .25 6.35 200
Back to Contents
Designed specifically to protect flat-face o-ring fittings. Widely used in the hydraulic and pneumatic industries. Head design allows for easy mechanical and hand installation.
39
Flared-Fitting Plugs
HF Series Red HD Polythene
Part Number
To Plug Thread Sizes
To Plug SEA/JIC Fitting
To Plug SAE/JIC Fitting
Dimensions Box Quantity
A Inches Metric
B Inches Metric
C Inches Metric
HF4 3/8 – 24 3/16 3 .46 11.70 .50 12.70 .18 4.57 1,000
HF6 7/16 – 20 1/4 4 .53 13.50 .62 15.75 .19 4.83 1,000
HF8 1/2 – 20 5/16 5 .53 13.50 .68 17.27 .25 6.35 1,000
HF10 9/16 – 18 3/8 6 .50 12.70 .81 20.57 .25 6.35 1,000
HF11 5/8 – 18 3/8 - .59 15.00 .81 20.57 .25 6.35 1,000
HF12 3/4 – 16 1/2 8 .75 19.10 .94 23.88 .25 6.35 500
HF14 7/8 – 14 5/8 10 .87 22.10 .94 23.88 .25 6.35 500
HF16 1-1/6 – 12 3/4 12 .86 21.80 1.41 35.81 .25 6.35 300
HF17 1-1/16 – 14 3/4 - .86 21.80 1.41 35.81 .25 6.35 300
HF18 1-3/16 – 12 7/8 - .93 23.62 1.50 38.10 .25 6.35 240
HF20 1-5/16 – 12 1 16 .93 23.60 1.50 38.10 .25 6.35 200
HF22 1-1/2 – 12 - - .93 23.62 1.75 44.45 .21 6.35 200
HF24 1-5/8 – 12 1-1/4 - .94 23.90 2.22 56.39 .34 8.64 100
HF26 1 -3/4 – 12 - - .97 24.60 2.31 58.67 .34 8.64 100
HF28 1-7/8 – 12 1-1/2 - 1.06 26.90 2.47 62.74 .38 9.65 100
HF30 2-1/4 – 12 1- 3/4 - 1.31 33.30 2.75 69.85 .38 9.65 50
HF32 2-1/2 – 12 2 - 1.31 33.30 3.09 78.49 .38 9.65 45
Back to Contents
Designed to protect flared fittings as well as 37o
flared fittings
without gasket. Engineered with knurled head for ease of
application. Will meet low-pressure testing requirements.
40
UNF and UN General Purpose Plugs
TF Series Red Polypropylene
Part Number
To Plug Thread
Size
Dimensions Box Quantity
A Inches Metric
B Inches Metric
C Inches Metric
TF7-1 7/16 – 20 .30 7.62 .68 17.27 .19 4.83 1,000
TF 8 1/2 – 20 .36 9.14 .74 18.80 .19 4.83 900
TF 9 9/16 – 18 .35 8.89 .81 20.57 .19 4.83 700
TF10 5/8 – 18 .34 8.64 .74 18.80 .17 4.32 1,500
TF12 3/4 – 16 .44 11.18 .89 22.61 .18 4.57 1,000
TF12-2 3/4 – 16 .44 11.18 1.03 26.16 .19 4.83 1,000
TF14 7/8 -14 .50 12.70 1.02 25.91 .24 6.10 500
TF17-2 1-1/16 – 12 .62 15.75 1.47 37.34 .19 4.83 300
TF21-1 1-5/16 – 12 .88 22.35 1.56 39.62 .25 6.35 200
TF26 1-5/8 – 12 1.00 25.40 2.00 50.80 .25 6.35 140
TF30 1-7/8 – 12 1.00 25.40 2.25 57.15 .25 6.35 100
Back to Contents
General purpose threaded plug that can be utilised for a variety of different applications. Series can be tightened by hand, hex, wrench or screwdriver. Will meet low-pressured testing requirements.
Thread locations will vary
Sampling recommended.
41
Pipe Thread Protectors
OE Series (Open End) LD Polythene
Part Number
NPT Size
Dimensions A C
Colour
Box
Quantity Inches Metric
Inches Metric
OE311 1/2 0.840 21.34 .078 19.81 Black 1,000
OE312 3/4 1.050 26.67 .078 19.81 Red 700
OE313 1 1.315 33.40 .097 24.64 Blue 800
OE314 1-1/4 1.660 42.16 1.00 25.40 Red 500
OE315 1-1/2 1.900 48.26 1.00 25.40 Black 400
OE316 2 2.375 60.33 1.03 26.16 Blue 240
OE317 2-1/2 2.875 73.03 1.56 39.62 Black 120
OE318 3 3.500 88.90 1.63 41.40 Blue 80
OE319 3-1/2 4.000 101.60 1.66 42.16 Black 60
OE320 4 4.500 114.30 1.72 43.69 Blue 45
OE321 5 5.563 141.30 1.81 45.97 Blue 24
OE322 6 6.625 168.28 1.94 49.28 Blue 16
The OE series has a specially designed bead to assure a snug fit for excellent
protection of threaded pip and conduit. An inexpensive way to eliminate a
costly concern.
42
Pipe Thread Protectors
CE Series (Closed End ) LD Polythene
Part Number
NPT Size
Dimensions A C
Colour
Box
Quantity Inches Metric
Inches Metric
CE309 1/4 0.53 13.69 0.59 14.99 Black 1,400
CE310 3/8 0.67 17.09 0.59 14.99 Black 800
CE311 1/2 0.84 21.34 0.78 19.81 Black 1,000
CE312 3/4 1.05 26.67 0.78 19.81 Black 800
CE313 1 1.31 33.40 0.97 24.64 Black 900
CE314 1-1/4 1.66 42.16 1.00 25.40 Black 500
CE315 1-1/2 1.90 48.26 1.00 25.40 Black 400
CE316 2 2.37 60.33 1.03 26.16 Black 240
CE317 2-1/2 2.87 73.00 1.56 39.62 Black 100
CE318 3 3.50 88.90 1.63 41.40 Black 80
CE319 3-1/2 4.00 101.60 1.66 42.16 Black 60
CE320 4 4.50 114.30 1.72 43.39 Black 45
CE321 5 5.56 141.30 1.81 45.97 Black 24
CE322 6 6.62 168.28 1.94 49.28 Black 16
CE324 8 8.62 219.08 2.13 54.10 Black 16
CE325 10 10.75 273.05 2.34 59.44 Black 8
CE326 12 12.75 323.85 2.53 64.26 Black 5
CE327 14 14.00 355.60 2.66 67.56 Black 4
Back to Contents
Excellent protection against damage caused during transit. Eliminates
debris from entering pipe and have been designed for easy installation
and removal.
The NPT size Column will help you match a nominal bore.
43
PVC Dip Mouldings – Round PVC Caps
VC Series Black PVC VC Series Black PVC VC Series Black PVC
Part Number
To Cap Diameter
Dimensions
Box Quantity
Part Number
To Cap Diameter
Dimensions
Box Quantity
Part Number
To Cap Diameter
Dimensions
Box Quantity
A In mm
C In mm
A In mm
C In mm
A In mm
C In mm
VC070-8 .070 1.78 .50 12.70 1,000 VC240-8 .240 6.09 .50 12.69 1,000 VC485-8 .485 12.32 .50 12.70 1,000
VC080-8 .080 2.03 .50 12.70 1,000 VC240-16 .240 6.09 1.00 25.38 1,000 VC485-16 .485 12.32 1.00 25.40 1,000
VC093-8 .093 2.36 .50 12.70 1,000 VC250-8 .250 6.35 .50 12.70 1,000 VC500-8 .500 12.70 .50 12.70 1,000
VC110-8 .110 2.79 .50 12.70 1,000 VC250-16 .250 6.35 1.00 25.40 1,000 VC500-16 .500 12.70 1.00 25.40 1,000
VC125-8 .125 3.18 .50 12.70 1,000 VC281-8 .281 7.14 .50 12.70 1,000 VC531-8 .531 13.49 .50 12.70 1,000
VC125-16 .125 3.18 1.00 25.40 1,000 VC281-16 .281 7.14 1.00 25.40 1,000 VC531-16 .531 13.49 1.00 25.40 500
VC140-8 .140 3.56 .50 12.70 1,000 VC312-8 .312 7.93 .50 12.70 1,000 VC544-8 .544 13.82 .50 12.70 1,000
VC140-16 .140 3.56 1.00 25.40 1,000 VC312-16 .312 7.93 1.00 25.40 1,000 VC544-16 .544 13.82 1.00 25.40 1,000
VC148-8 .148 3.76 .50 12.70 1,000 VC313-16 .313 7.95 1.00 25.40 1,000 VC562-8 .562 14.28 .50 12.70 500
VC156-8 .156 3.96 .50 12.70 1,000 VC343-16 .343 8.71 1.00 25.40 1,000 VC562-16 .562 14.28 1.00 25.40 500
VC156-16 .156 3.96 1.00 25.40 1,000 VC360-8 .360 9.14 .50 12.70 1,000 VC600-8 .600 15.24 .50 12.70 600
VC172-8 .172 4.37 .50 12.70 1,000 VC375-8 .375 9.53 .50 12.70 1,000 VC600-16 .600 15.24 1.00 25.40 400
VC172-16 .172 4.37 1.00 25.40 1,000 VC375-16 .375 9.53 1.00 25.40 500 VC610-8 .610 15.49 .50 12.70 1,000
VC180-8 .180 4.57 .50 12.70 1,000 VC390-8 .390 9.91 .50 12.70 1,000 VC610-16 .610 15.49 1.00 25.40 1,000
VC180-16 .180 4.57 1.00 25.40 1,000 VC406-8 .406 10.31 .50 12.70 1,000 VC615-8 .615 15.62 .50 12.70 1,000
VC187-8 .187 4.75 .50 12.70 1,000 VC406-16 .406 10.31 1.00 25.40 500 VC615-16 .615 15.62 1.00 25.40 1,000
VC187-16 .187 4.75 1.00 25.40 1,000 VC437-8 .437 11.10 .50 12.70 1,000 VC625-8 .625 15.88 .50 12.70 500
VC207-8 .207 5.26 .50 12.70 1,000 VC437-16 .437 11.10 1.00 25.40 500 VC625-16 .625 15.88 1.00 25.40 500
VC234-8 .234 5.94 .50 12.70 1,000 VC470-8 .470 11.94 .50 12.70 1,000 VC670-8 .670 17.02 .50 12.70 1,000
VC234-16 .234 5.94 1.00 25.40 1,000 VC470-16 .470 11.94 1.00 25.40 1,000 VC670-16 .670 17.02 1.00 25.40 1,000
Pliable PVC caps stretch to fit for ideal protection where tolerances vary. Resist tearing and cracking. Huge range of sizes available to the representative selection detailed below. Standard material Black withstands 75
oC
The range is available to order in hi-temp material to withstand 240oC
44
PVC Dip Mouldings – Round PVC Caps (continued from previous page)
VC Series Black PVC VC Series Black PVC VC Series Black PVC
Part Number
To Cap Diameter
Dimensions
Box Quantity
Part Number
To Cap Diameter
Dimensions
Box Quantity
Part Number
To Cap Diameter
Dimensions
Box Quantity
A In mm
C In mm
A In mm
C In mm
A In mm
C In mm
VC687-8 .687 17.45 .50 12.70 500 VC922-8 .922 23.42 .50 12.70 1,000 VC1687-16 1.687 42.85 1.00 25.40 140
VC687-16 .687 17.45 1.00 25.40 1,000 VC922-16 .922 23.42 1.00 25.40 1,000 VC1750-16 1.750 44.45 1.00 25.40 140
VC720-8 .720 18.29 .50 12.70 1,000 VC937-8 .937 23.80 .50 12.70 500 VC1875-16 1.875 47.62 1.00 25.40 120
VC720-16 .720 18.29 1.00 25.40 1,000 VC937-16 .937 23.80 1.00 25.40 200 VC2000-16 2.000 50.80 1.00 25.40 120
VC735-8 .735 18.67 .50 12.70 1,000 VC980-8 .980 24.89 .50 12.70 1,000 VC2125-16 2.125 53.98 1.00 25.40 100
VC735-16 .735 18.67 1.00 25.40 1,000 VC980-16 .980 24.89 1.00 25.40 1,000 VC2250-16 2.250 57.15 1.00 25.40 100
VC740-8 .740 18.80 .50 12.70 1,000 VC1000-8 1.000 25.40 .50 12.70 200 VC2375-16 2.375 60.33 1.00 25.40 80
VC740-16 .740 18.80 1.00 25.40 1,000 VC1000-16 1.000 25.40 1.00 25.40 200 VC2500-16 2.500 63.50 1.00 25.40 80
VC750-8 .750 19.05 .50 12.70 500 VC1040-16 1.040 26.42 1.00 25.40 1,000 VC2625-16 2.625 66.67 1.00 25.40 80
VC750-16 .750 19.05 1.00 25.40 200 VC1062-16 1.062 26.97 1.00 25.40 240 VC2750-16 2.750 69.85 1.00 25.40 60
VC812-8 .812 20.63 .50 12.70 500 VC1125-16 1.125 28.58 1.00 25.40 1,000 VC2875-16 2.875 73.03 1.00 25.40 50
VC812-16 .812 20.63 1.00 25.40 200 VC1187-16 1.187 30.15 1.00 25.40 200 VC3000-16 3.000 76.20 1.00 25.40 50
VC843-8 .843 21.41 .50 12.70 500 VC1250-16 1.250 31.75 1.00 25.40 200 VC3125-16 3.125 79.37 1.00 25.40 1,000
VC843-16 .843 21.41 1.00 25.40 200 VC1312-16 1.312 33.32 1.00 25.40 160 VC3250-16 3.250 82.55 1.00 25.40 1,000
VC855-8 .855 21.72 .50 12.70 1,000 VC1375-16 1.375 34.92 1.00 25.40 160 VC3500-16 3,500 88.90 1.00 25.40 1,000
VC855-16 .855 21.72 1.00 25.40 1,000 VC1437-16 1.437 36.50 1.00 25.40 150 VC3625-16 3.625 92.08 1.00 25.40 1,000
VC875-8 .875 22.23 .50 12.70 500 VC1500-16 1.500 8.10 1.00 25.40 150 VC4000-16 4.000 101.60 1.00 25.40 1,000
VC875.16 .875 22.23 1.00 25.40 200 VC1625-16 1.625 41.27 1.00 25.40 150 VC4250-16 4.250 107.95 1.00 25.40 1,000
VC905-8 .905 22.99 .50 12.70 1,000 VC1670-8 1.670 42.42 .50 12.70 1,000 VC4375-16 4.375 111.13 1.00 25.40 1,000
VC905-16 .905 22.99 1.00 25.40 1,000 VC1670-16 1.670 42.42 1.00 25.40 1,000 VC4437-16 4.437 112.70 1.00 25.40 1,000
Back to Contents
45
PVC Dip Mouldings – Standard and Hi-Temp Plugs
HP Series Black or Red Vinyl
Part Number
To Plug Thread Sizes Dimensions Box
Quantity
NPT/BSP
Standard
Metric A
Inches Metric B
Inches Metric
HP1 - 1/4 M6 .195 4.95 .125 3.18 100
HP2 - 5/16 M8x1 .290 7.37 .210 5.33 100
HP3 1/8 3/8 M10x 1.25 .400 10.16 .290 7.37 100
HP4 - 7/16 M12 .445 11.30 .340 8.64 100
HP5 1/4 1/2 M14 .530 13.46 .365 9.27 100
HP6 - 9/16 - .570 14.48 .445 11.30 50
HP7 3/8 5/8 - .640 16.26 .520 13.21 50
HP8 1/2 3/4 M20 .800 20.32 .682 17.32 50
HP9 - 7/8 M24 .870 22.10 .732 18.59 25
HP10 3/4 1-1/16 M27x2 1.025 28.04 .891 22.63 25
HP11 1 1-3/16, 1-1/4, 1-5/16 M33 1.275 32.39 1.145 29.13 25
Back to Contents
Pliable PVC plugs with all-round pull tab design provides excellent protection for
threaded or smooth bores. Standard PVC material colour black, protects up to 75 oC.
Hi temp PVC material protect up to 240 oC.
46
PVC Dip Mouldings – Standard and Hi-Temp Square Caps
SV Series Black or Red Vinyl
Part Number
To Cap Dimensions Box
Quantity A
Inches Metric C
Inches Metric
SV250-8 .250 6.35 .50 12.70 1,000
SV500-8 .500 12.70 .50 12.70 600
SV625-8 .625 15.88 .50 12.70 500
SV750-12 .750 19.05 .75 19.05 400
SV1000-16 1.000 25.40 1.00 25.40 180
SV1250-16 1.250 31.75 1.00 25.40 140
SV1500-16 1.500 38.10 1.00 25.40 120
SV1750-16 1.750 44.45 1.00 25.40 100
SV1875-16 1.500 47.63 1.00 25.40 80
SV2500-16 2.500 63.50 1.00 25.40 80
SV3500-16 3.500 88.90 1.00 25.40 40
SV4000-16 4.000 101.60 1.00 25.40 20
Back to Contents
Designed to minimize tearing, cracking or splitting. Will fit the most
popular square sizes of plastic or steel tubing. Our high-gloss material is
great for decorative applications.
47
PVC Dip Moulding – Vinyl (ergo-correct) Pull Caps
EC Series Black or Red Vinyl
Part
Number
To Cap Diameter
A Inches Metric
Dimensions
Box
Quantity B Inches Metric
C Inches Metric
EC-406-8 .406 10.31 .500 12.70 1.150 29.21 1,000
EC-470-8 .470 11.94 .500 12.70 1.280 32.51 1,000
EC-595-10 .595 15.11 .625 15.88 1.525 38.73 500
EC-717-16 .717 18.21 .625 15.88 2.130 54.10 400
EC-950-14 .950 24.13 .625 15.88 2.140 54.36 250
Pliable material and form-fitting tab. Used in a variety of applications as thread protectors, dust covers and paint masks. Helps prevent moisture and impact damage.
48
PVC Dip Moulding – Vinyl Pull Caps
PC Series Black or Red Vinyl
Part
Number
To Cap Diameter
A Inches Metric
Dimensions Box
Quantity B Inches Metric
C Inches Metric
PC 187-12 .187 4.74 .75 19.05 1.36 34.54 50
PC 240-12 .240 6.09 .75 19.05 1.54 39.12 50
PC 303-12 .303 7.69 .75 19.05 1.52 38.61 50
PC 312-12 .312 7.92 .75 19.05 1.52 38.61 50
PC 365-12 .365 9.27 .75 19.05 1.53 38.86 50
PC 406-12 .406 10.31 .75 19.05 1.45 36.83 50
PC 490-12 .490 12.44 .75 19.05 1.73 43.94 50
PC 521-12 .521 13.23 .75 19.05 1.55 39.37 50
PC 552-12 .552 14.02 .75 19.05 1.44 36.58 50
PC 600-12 .600 15.24 .75 19.05 1.31 33.27 50
PC 615-12 .615 15.62 .75 19.05 1.51 38.35 50
PC 677-12 .677 17.19 .75 19.05 1.31 33.27 50
PC 760-12 .760 19.30 .75 19.05 1.54 39.12 50
PC 985-12 .985 25.01 .75 19.05 1.37 34.80 25
Back to Contents
The pull tab at the centre of this cap allows for easy removal. May be used in a
variety of applications as thread protectors, dust covers and paint masks. Helps
prevent moisture and impact damage.
49
Hi-Temp Protection Parts – Silicone Caps
SC Series Silicone Caps
Part
Number
To Cap Diameter Inches Metric
Inside Length Inches Metric
Bag
Quantity
SC-093-12 0.093 2.36 3/4 19.05 200
SC-109-12 0.109 2.77 3/4 19.05 200
SC-125-16 0.125 3.18 1 25.40 200
SC-156-16 0.156 3.96 1 25.40 100
SC-172-16 0.172 4.37 1 25.40 100
SC-187-16 0.187 4.75 1 25.40 100
SC-234-16 0.234 5.94 1 25.40 100
SC-250-16 0.250 6.35 1 25.40 100
SC-281-16 0.281 7.14 1 25.40 100
SC-312-16 0.312 7.92 1 25.40 100
SC-375-16 0.375 9.53 1 25.40 100
SC-437-16 0.437 11.10 1 25.40 40
SC-500-24 0.500 12.70 1 1/2 38.10 50
SC-625-24 0.625 15.88 1 1/2 38.10 50
SC-750-24 0.750 19.05 1 1/2 38.10 50
SC-812-24 0.812 20.62 1 1/2 38.10 40
SC-875-24 0.875 22.23 1 1/2 38.10 40
Seventeen sizes of caps offering protection to 250 oC or intermittently to 300
oC.
Natural Silicone Rubber.
50
Hi-Temp Protection Parts – Silicone Plugs
SCP Series Silicone Plugs
Part Number
Small Diameter Inches Metric
Large Diameter Inches Metric
Length Inches Metric
Bag Quantity
SCP2-6 1/16 1.59 3/16 4.76 5/8 15.88 1,000
SCP4-8 1/8 3.17 1/4 6.35 3/4 19.05 1,000
SCP6-11 3/16 4.76 11/32 8.73 5/8 15.88 1,000
SCP8-12 1/4 6.35 3/8 9.52 3/4 19.05 1,000
SCP11-4 11/32 8.73 7/16 11.11 12/32 18.25 1,000
SCP18-24 9/16 14.29 3/4 19.05 1 25.40 1,000
Back to Contents
High-temperature plugs. Extended protection to 250 oC, intermittent
protection to 300 oC. Ideal for powder coating, chrome plating,
electro plating, paint spraying and anodizing. Sizes 1/16 – 3/4. Natural Silicone Rubber.
51
HI-Temp Protection Parts – Flexible Protection Caps
FPC Black Termoplastic Rubber
Part Number
To Cap Diameter mm
Inside Length mm
Bag Quantity
FPC-05 5 23.5 10,000
FPC-06 6 25 10,000
FPC-07 7 24 10,000
FPC-08 8 25 10,000
FPC-09 9 25 7,000
FPC-10 10 29.5 5,000
FPC-11 11 29 4,500
FPC-12 12 29 4,000
FPC-13 13 29 3,500
FPC-14 14 29.5 3,000
FPC-15 15 29.5 2,500
FPC-16 16 28 2,500
FPC-17 17 29.5 2,000
FPC-18 18 28.5 2,000
FPC-19 19 29.5 2,000
FPC-20 20 28.5 1,600
Back to Contents
Ideal protection for threads on metric bolts or studs. Flexible TPR material withstands temperatures to 190
oC. Tab and Eye feature allows for fast
removal with screwdriver or by hand. Metric sizes from 5mm to 20mm. Standard colour: Black
52
Ferrules and End Caps – Parallel Cap
SP70000 Series Yellow LD Polythene
Part
Number
A Dia
Inches Metric
B Dia
Inches Metric
C Inches Metric
D Inches Metric
E Inches Metric
F Inches Metric
Bag
Quantity
SP70001 0.250 6.35 0.375 9.52 0.500 12.70 0.537 13.64 0.475 12.07 0.062 1.57 5,000
SP70004 0.312 7.92 0.436 11.07 0.500 12.70 0.862 21.89 0.800 20.32 0.062 1.57 5,000
SP70005 0.375 9.53 0.500 12.70 0.625 15.88 1.012 25.70 0.950 24.13 0.062 1.57 5,000
SP70010 0.437 11.10 0.562 14.27 0.687 17.45 1.012 25.70 0.950 24.13 0.062 1.57 5,000
SP70014 0.500 12.70 0.625 15.87 0.750 19.05 1.499 38.07 1.437 36.50 0.062 1.57 4,000
SP98047 * 0.481 12.22 0.981 19.87 0.606 15.39 0.437 11.10 0.500 12.70 0.062 1.57 4,000
SP70019 0.590 14.99 0.715 18.16 0.835 21.21 1.012 25.70 0.950 24.13 0.062 1.57 4,000
SP70020 0.625 15.88 0.750 19.05 0.875 22.23 1.249 31.72 1.187 30.15 0.062 1.57 1,000
SP70025 0.750 19.05 0.875 22.22 1.000 25.40 1.128 30.94 1.156 29.36 0.062 1.57 1,500
SP70035 1.000 25.40 1.125 28.57 1.250 31.75 1.499 38.07 1.437 36.50 0.062 1.57 1,000
SP70040 1.102 27.99 1.226 31.14 1.352 34.34 1.012 25.70 0.950 24.13 0.062 1.57 1,000
Back to Contents
These low cost Caps feature grip and flange to assist
easy fitting and removal.
* Available in Red LDP only.
53
Ferrules and End Caps – Ferrules
SP98100 Black LD Polythene
Part Number
A Diameter
Inches Metric
B Diameter
Inches Metric
Bag
Quantity
SP98187 0.187 4.80 0.470 11.90 10,000
SP98188 0.312 7.90 0.563 14.30 10,000
SP98189 0.375 9.50 0.575 15.10 2,500
SP98190 0.500 12.70 0.682 18.60 4,000
Back to Contents
Ferrules provide a low cost decorative finish or
can offer extra protection during transit.
54
Ferrules and End Caps – Protective Thimbles
Red LD Polythene
Part Number
A Inches Metric
B Inches Metric
C Inches Metric
D Inches Metric
Bag Quantity
SP98120 0.345 8.76 0.812 20.62 0.052 1.32 0.062 1.57 5,000
SP98045 0.490 12.45 0.312 7.92 0.067 1.70 0.062 1.57 5,000
SP98002 0.695 17.65 0.630 16.00 0.078 1.98 0.039 0.99 2,500
SP98097 1.125 28.58 1.750 44.45 0.050 1.27 0.050 1.27 1,000
SP98009 1.125 28.58 3.000 76.20 0.035 0.89 0.035 0.89 1,000
Ferrules and End Caps – Protective Thimbles
SP98114 Red LD Polythene
Part Number
A Inches Metric
B Inches Metric
C Inches Metric
D Inches Metric
E Inches Metric
Bag Quantity
SP98114 22.23 0.875 27.76 1.093 30.15 1.187 0.914 0.036 11.43 0.450 3,000
Back to Contents
This thimble caps 7/8” threaded parts and can be used as a plug too. Available in other colour choices.
Other colours available to order.
55
Finishing Parts – Round Ribbed Inserts (Imperial Sizes)
RR Series Black LD Polythene
Size Description Wall Thickness Bag Quantity
1/2” Ribbed 16-18 SWG 10,000
1/2” Plain 20 SWG 10,000
5/8” Ribbed 14-20 SWG 5,000
3/4” Ribbed 14-20 SWG 5,000
3/4” Plain 16 SWG 5,000
7/8” Ribbed 14-20 SWG 4,000
7/8” Plain 16 SWG 4,000
7/8” Ribbed 18 SWG 5,000
1” Ribbed 14-20 SWG 4,000
1” Ribbed 10-14 SWG 4,000
1” Ribbed 16-18 SWG 4,000
1 1/8” Ribbed 14-20 SWG 2,500
1 1/4” Ribbed 14-20 SWG 1,500
1 1/2” Ribbed 14-20 SWG 1,500
1 5/8” Ribbed 14-20 SWG 1,000
1 3/4” Ribbed 14-20 SWG 500
1 29/32” Ribbed 6-10 SWG 500
2” Ribbed 10-14 SWG 500
2” Ribbed 14-20 SWG 500
2” Plain 10 SWG 500
2 1/4“ Ribbed 14-20 SWG 500
2 3/8” Ribbed 10-14 SWG 400
2 1/2” Ribbed 14-18 SWG 400
2 1/2” Ribbed 8-12 SWG 400
These inserts are the ideal way of finishing your tubed furniture etc. All inserts are measured by the outer head size. These parts are produced with varying rib sizes to accommodate different gauge wall thicknesses.
56
Finishing Parts – Round Ribbed Inserts (Metric Sizes)
RR Series Black LD Polythene
Size Description Wall Thickness Bag Quantity
12.7 mm Ribbed 1.2-1.5 mm 10,000
15.8 mm Ribbed 1.0-2.0 mm 5,000
19.0 mm Ribbed 1.0-2.0 mm 5,000
22.2 mm Ribbed 1.0-2.0 mm 4,000
25.4 mm Ribbed 1.0-3.2 mm 4,000
28.5 mm Ribbed 1.0-2.0 mm 2,500
31.7 mm Ribbed 1.0-2.0 mm 2,500
38.1 mm Ribbed 1.0-2.0 mm 1,500
41.2 mm Ribbed 1.0-2.0 mm 1,000
44.4 mm Ribbed 1.0-2.0 mm 1,000
48.0 mm Ribbed 3.5-4.5 mm 500
50.8 mm Ribbed 1.0-3.2 mm 500
57.1 mm Ribbed 1.0-2.0 mm 500
60.3 mm Ribbed 2.0-3.2 mm 400
63.5 mm Ribbed 1.2-3.5 mm 400
100.0 mm Ribbed 4.5-6.0 mm 200
110.00 mm Ribbed 4.5-6.0 mm 150
Back to Contents
These inserts are the ideal way of finishing your tubed furniture etc. All inserts are measured by the outer head size. These parts are produced with varying rib sizes to accommodate different gauge wall thicknesses.
57
Finishing Parts – Square Ribbed Inserts (Imperial Sizes)
SR Black LD Polythene
Size Description Wall Thickness Bag Quantity
1/2” x 1/2” Ribbed 16-18 SWG 10,000
5/8” x 5/8” Ribbed 14-20 SWG 5,000
3/4” x 3/4” Ribbed 14-20 SWG 5,000
7/8” x 7/8” Ribbed 14-20 SWG 3,000
1” x 1” Ribbed 10-14 SWG 2,500
1” X 1” Ribbed 14-20 SWG 2,500
1” X 1” Ribbed 16-18 SWG 2,500
1 1/8” x 1 1/8” Ribbed 14-20 SWG 2,000
1 1/4” x 1 1/4” Ribbed 14-20 SWG 2,000
1 3/8” x 1 3/8” Ribbed 14-20 SWG 2,000
1 1/2” x 1 1/2“ Ribbed 14-20 SWG 1,000
1 1/2” x 1 1/2“ Ribbed 10-14 SWG 1,000
1 3/4” x 1 3/4” Ribbed 14-20 SWG 1,000
2” x 2” Ribbed 10-14 SWG 500
2” x 2” Ribbed 14-20 SWG 500
Back to Contents
These inserts are the ideal way of finishing your tubed furniture etc. All inserts are measured by the outer head size. These parts are produced with varying rib sizes to accommodate different gauge wall thicknesses.
58
Finishing Parts – Square Ribbed Inserts (Metric Sizes)
SR Black LD Polythene
Size Description Wall Thickness Bag Quantity
12.7 x 12.7 Ribbed 1.2-1.5 mm 10,000
15.8 x 15.8 Ribbed 1.0-2.0 mm 5,000
20.0 x 20.0 Ribbed 1.0-2.0 mm 5,500
22.2 x 22.2 Ribbed 1.0-2.0 mm 3,000
25.4 x 25.4 Ribbed 1.0-3.2 mm 2,500
28.5 x 28.5 Ribbed 1.0-2.0 mm 2,000
30.0 x 30.0 Ribbed 1.0-2.0 mm 2,000
31.7 x 31.7 Ribbed 1.0-2.0 mm 2,000
34.9 x 34.9 Ribbed 1.0-2.0 mm 1,000
38.1 x 38.1 Ribbed 1.0-3.2 mm 1,000
40.0 x 40.0 Ribbed 1.0-2.0 mm 500
40.0 x 40.0 Ribbed 2.0-3.0 mm 500
44.4 x 44.4 Ribbed 1.0-2.0 mm 1,000
45.0 x 45.0 Plain 2.0 mm 1,000
50.8 x 50.8 Ribbed 1.0-3.2 mm 500
80.0 x 80.0 Plain 3.0-5.0 mm 150
100.0 x 100.0 Plain 8.0 mm 100
Back to Contents
These inserts are the ideal way of finishing your tubed furniture etc. All inserts are measured by the outer head size. These parts are produced with varying rib sizes to accommodate different gauge wall thicknesses.
59
Finishing Parts – Rectangular Ribbed Inserts (Imperial Sizes)
RTR Black LD Polythene
Size Description Wall Thickness Bag Quantity
1” x 1/2” Ribbed 16-18 SWG 5,000
1 1/4“ x 5/8” Plain 16-18 SWG 5,000
1 3/8” x 5/8” Ribbed 14-20 SWG 3,000
1 1/2” x 3/4” Ribbed 14-20 SWG 2,000
1 1/2” x 1” Plain 16-18 SWG 2,000
1 1/2” x 1” Ribbed 14-20 SWG 2,000
2” x 1” Ribbed 14-20 SWG 1,500
2” x 1” Ribbed 16-18 SWG 1,000
2” x 1” Ribbed 10-14 SWG 1,500
2 1/2” x 1” Ribbed 14-20 SWG 1,000
2 1/2” x 1 1/2” Ribbed 14-20 SWG 500
Back to Contents
These inserts are the ideal way of finishing your tubed furniture etc. All inserts are measured by the outer head size. These parts are produced with varying rib sizes to accommodate different gauge wall thicknesses.
60
Finishing Parts – Rectangular Ribbed Inserts (Metric Sizes)
RTR Series Black LD Polythene Size Description Wall Thickness Bag Quantity
20 x 10 mm Plain 1.5 mm 10,000
25 x 20 mm Plain 1.5 mm 3,000
30 x 15 mm Plain 1.5 mm 4,000
30 x 15 mm Plain 1.2 mm 4,000
30 x 20 mm Plain 2.0 mm 3,000
31 x 19 mm Plain 1.5 mm 2,500
32 x 16 mm Plain 1.5 mm 5,000
34 x 20 mm Plain 2.0 mm 2,000
40 x 20 mm Ribbed 1.0-2.0 mm 2,000
40 x 25 mm Ribbed 1.0-2.0 mm 1,500
45 x 20 mm Plain 1.2 mm 1,500
50 x 25 mm Ribbed 1.5-3.2 mm 1,500
50 x 30 mm Ribbed 1.0-3.0 mm 1,000
50 x 40 mm Plain 2.5 mm 1,000
60 x 20 mm Plain 1.5 mm 1,000
60 x 20 mm Ribbed 1.0-1.6 mm 1,000
60 x 25 mm Plain 1.5 mm 1,000
60 x 30 mm Ribbed 1.5-3.0 mm 500
60 x 40 mm Ribbed 2.0-3.5 mm 500
70 x 25 mm Plain 1.5 mm 500
70 x 25 mm Ribbed 1.2-1.6 mm 500
80 x 30 mm Plain 2.0 mm 500
80 x 40 mm Ribbed 2.5-4.0 mm 250
100 x 50 mm Ribbed 2.0-4.0 mm 200
105 x 40 mm Plain 2.0-4.0 mm 200
Back to Contents
These inserts are the ideal way of finishing your tubed furniture etc. All inserts are measured by the outer head size. These parts are produced with varying rib sizes to accommodate different gauge wall thicknesses.
61
Snap in Plugs
SI Series Black LD Polythene
Part
Number
To Plug
Hole Size
Metal
Thickness
Dimensions Box
Quantity A Inches Metric
B Inches Metric
C Inches Metric
D Inches Metric
SI 659 3/8 .02-.05 .410 10.41 .37 9.65 .31 7.87 .75 19.05 1,000
SI 659-1 3/8 .06-.11 .410 10.41 .37 9.65 .31 7.87 .75 19.05 1,000
SI 400 7/16 .03-.06 .470 11.94 .43 11.43 .36 9.14 .69 17.53 1,000
SI 411 1/2 .03-.08 .540 13.72 .49 12.95 .40 10.16 .88 22.35 1,000
SI 401 9/16 .03-.08 .600 15.24 .55 14.22 .45 11.43 .87 22.10 1,000
SI 430 5/8 .06-.08 .680 17.15 .62 15.87 .50 12.70 .81 20.57 1,000
SI 437 11/16 .03-.08 .680 17.78 .68 17.78 .56 14.22 1.01 25.66 1,000
SI 412 3/4 .05-.11 .790 20.07 .73 19.30 .62 15.75 1.01 25.66 1,000
SI 402 13/16 .03-.08 .850 21.59 .81 20.62 .67 17.02 1.11 28.19 1,200
SI 438 7/8 .03-.08 .910 23.11 .86 22.35 .75 19.05 1.16 29.47 1,000
SI 403 15.16 .03-.08 .980 24.89 .92 24.13 .78 19.81 1.31 33.28 1,000
SI 413 1 .03-.08 1.040 26.42 1.000 25.40 .88 22.35 1.38 35.05 1,000
SI 465 1-3/32 .03-.08 1.150 29.21 1.090 27.60 1.00 25.40 1.31 33.27 1,000
SI 404 1-1/8 .03-.08 1.180 29.97 1.250 31.75 1.01 25.65 1.53 38.86 400
SI 457 1-3/16 .03-.08 1.220 30.99 1.160 30.48 1.05 26.67 1.56 39.63 500
SI 414 1-1/4 .03-.08 1.290 32.77 1.250 31.75 1.12 28.45 1.62 41.15 500
SI 405 1-5/16 .03-.08 1.360 34.55 1.290 33.78 1.14 28.96 1.68 42.67 500
SI 416 1-3/4 .03-.08 1.540 39.12 1.750 44.45 1..62 41.15 1.68 42.67 400
SI 417 2 .03-.08 2.040 51.81 1.980 51.05 1.88 47.75 2.36 59.94 200
SI 406 2-1/8 .03-.08 2.170 55.12 2.100 54.36 1.94 49.28 2.49 63.25 200
SI 419 2-1/2 .03-.08 2.560 65.02 2.500 63.50 2.38 60.45 3.00 76.20 200
SI 472 2-5/8 .03-.08 2.678 67.95 2.620 66.67 2.52 64.01 3.12 79.25 200
SI 421 3 .03-.08 3.060 77.73 2.970 76.71 2.85 72.39 3.36 85.35 150
Provides an attractive finished appearance for access holes in sheet metal.
Widely used on automotive bodies, tanks, appliances or in any application
where an attractive appearance is needed. Flexible yet durable. Snap-in
ring provides a secure fit.
62
Snap in Plugs (Continued from previous page)
SI Series Black LD Polythene
Part
Number
To Plug
Hole Size
Metal
Thickness
Dimensions Box
Quantity A Inches Metric
B Inches Metric
C Inches Metric
D Inches Metric
SI 407 3-1/8 .03-.08 3.180 80.77 3.120 79.37 2.94 74.68 3.52 89.41 140
SI 408 3-3/8 .03-.08 3.430 87.12 3.315 86.36 3.22 81.79 3.75 95.25 100
SI 409 3-1/2 .03-11 3.560 90.43 3.470 89.41 3.34 84.84 3.86 98.05 100
SI 425 4 .05-.10 4.060 103.12 4.000 101.60 3.90 99.06 4.50 114.30 70
SI 425S 4 .05-.10 4.100 104.14 4.000 101.60 3.88 98.55 4.50 114.30 80
Back to Contents
63
Quick Release Coupling Cap
Part Number
Bag Quantity
SP95026
22.22 mm OD
0.875’
1,000
Quick Release Coupling Plug
Part Number
Bag Quantity
SP95027
20.32 mm ID
0.800’
1,000
Back to Contents
Dust Cap to suit quick release coupling.
Black PVC.
Dust Plug to suit quick release coupling.
Red PVC .
64
Hose Protection flanged Washers
Range 1 Red LD Polythene
Part Number
A Inches Metric
B Inches Metric
C Inches Metric
Bag Quantity
SP98004 0.531 13.49 0.290 7.37 0.218 5.54 5,000
SP98008 0.957 24.31 0.630 16.00 0.218 5.54 5,000
SP98012 0.656 16.66 0.415 10.54 0.218 5.54 5,000
SP98013 1.082 27.48 0.770 19.56 0.218 5.54 5,000
SP98014 0.801 20.35 0.545 13.84 0.218 5.54 5,000
Range 2 Heavy Duty Orange LD Polythene
Part Number
A Inches Metric
B Inches Metric
C Inches Metric
Bag Quantity
713 0.530 13.49 0.265 6.73 0.175 4.56 3,000
292 0.562 14.27 0.320 8.12 0.175 4.56 2,000
749 0.625 15.87 0.312 7.92 0.175 4.56 2,000
502 0.589 14.96 0.320 8.12 0.175 4.56 2,000
293 0.719 18.26 0.445 11.30 0.175 4.56 2,000
638 0.775 19.68 0.280 7.11 0.175 4.56 3,000
503 0.761 22.04 0.445 11.30 0.175 4.56 3,000
294 0.859 19.32 0.575 14.60 0.175 4.56 2,000
504 0.870 19.32 0.575 14.60 0.175 4.56 2,000
750 0.970 24.63 0.560 14.22 0.175 4.56 1,500
295 0.984 24.99 0.700 17.78 0.175 4.56 1,600
505 1.042 26.46 0.700 17.78 0.175 4.56 2,000
296 1.156 29.36 0.828 21.03 0.175 4.56 1,200
506 1.167 29.36 0.828 21.03 0.175 4.56 1,600
Back to Contents
Two great ranges of flanged washers designed to finish and protect Hydraulic hoses.
65
Bundle End Caps
RED LD Polythene
Part Number
Tube Size (Millimeters)
No. of Tubes
Minimum Quantity
SP98054 15 10 3,000
SP98105 22 10 2,000
SP98065 28 10 1,000
SAE Flange Caps
Red LD Polythene
Part Number
A Inches Metric
B Inches Metric
E Inches Metric
SAE Inches Metric
Bag Quantity
SP98023 1.052 26.72 1.177 29.90 0.265 6.73 0.500 12.70 5, 000
SP98005 1.365 34.67 1.490 37.85 0.265 6.73 0.750 19.05 2,000
SP98006 1.615 41.02 1.740 44.20 0.315 8.00 1.000 25.40 2,500
SP98017 1.865 47.37 1.990 50.55 0.315 8.00 1.250 31.75 1,500
SP98024 2.240 56.90 2.365 60.07 0.315 8.00 1.500 38.10 1,500
Back to Contents
Protect the ends of tubes from damage during transit or storage. Tube End Caps
are available in a range of sizes and colours. The various colours may be used as
a key facilitating the identification of stock types and sizes.
Standard colour Red.
Available in other colours to order.
66
Cable Ties
CV Series CV Series Standard Cable Ties
Part
Number
Length
Metric Inches
Width
Metric
Max Bundle Dia
Metric
Min Tensile Strength Ibs (kgs)
Part
Number
Length Metric Inches
Width Metric
Max Bundle Dia Metric
Min Tensile Strength Ibs (Kgs)
CV-075 75 3 2.4 18 CV-120L 120 4-3/4 4.8 30
CV-094 96 3-3/4 2.5 23 CV-160L 160 6-1/4 4.8 42
CV-100 100 4 2.5 25 CV-180 180 7 4.0 49
CV-120S 120 4-3/4 2.5 30 18 (8) CV-190 190 7-1/2 4.8 52
CV140S 142 5-1/2 2.5 35 CV-200 203 8 4.0 55
CV-165 165 6-1/2 2.5 44 CV-250 250 10 4.8 74 50 (22)
CV-200M 203 8 2.5 55 CV-280 280 11 4.8 81
CV-120 120 4-3/4 3.2 30 CV-310 310 12 4.8 89
CV-140 142 5-1/2 3.6 35 CV-368 368 14-1/2 4.8 102
CV-150 150 6 3.6 39 CV-385 385 15-3/16 4.8 116
CV-200S 203 8 3.2 55 CV-432 432 17 4.8 125
CV-200A 203 8 3.6 55 40 (18) CV-450M 450 17-3/4 4.8 130
CV-250M 250 10 3.6 74
CV-265 265 10-1/2 3.6 78
CV-292 292 11-1/2 3.6 85
CV-330 331 13 3.6 96
CV-368S 368 14-1/2 3.6 102
Back to Contents
Packed in 100’s or 1000’s
UL Approved
Available in Natural or UV resistant Black Nylon 66.
67
Protective Sleeving
Back to Contents
Part Number
Colour Diameter (mm)
Min Diameter (mm)
Max (m)
Roll Length MD
Rolls (per box)
TP5 Clear 7 15 200 4
TP10 Violet 10 20 200 4
TP15 Light Blue 15 30 200 4
TP20 Blue 25 50 200 4
TP45 Blue 35 80 200 2
TP50 Yellow 35 70 200 2
TP75 Brown 50 75 200 2
TP95 Pink 50 100 200 2
TP100 Red 50 100 200 2
TP140 Ochre 70 160 200 2
TP150 Orange 75 150 50 2
TP180 Light Green 125 200 50 2
TP200 Dark Green 100 200 200 2
TP210 Black 120 250 200 2
TP220 Clear 125 250 100 2
Protective sleeving provides a practical, efficient and cost effective solution to the problems of surface damage to components during
manufacture, storage and transit. Available in a range of colour-coded sizes, the mesh is flexible enough to mould around irregular-shaped
items yet tough enough to withstand knocks and scratches and unlike traditional materials such as waxed paper, it can be used again and
again.
Manufactured from polyethylene in a tube form in a range of diameters from 7mm to 400mm. Protective sleeving is resistant to acids and
solvents and unaffected by oils and grease making it ideal for protecting machine parts in an engineering environment. Other applications
include protecting damage-prone items such as ceramics, glass and sanitary-ware.
68
Protective Sleeving (continued from previous page)
Back to Contents
Part Number
Colour Diameter (mm)
Min Diameter (mm)
Max (m)
Roll Length MD
49012017 Orange 6 17 250
49011201 Black 10 25 250
49012227 Violet 18 60 50
49013010 Pink (high stretch) 20 45 50
49013108 Purple (high stretch) 40 80 50
49012318 Red 50 100 50
49013220 Green (high stretch) 75 125 25
49012419 Yellow 100 200 50
49011224 Royal Blue (Heavy Duty)
190 225 25
49012524 Blue 200 400 50
69
Materials and Properties
Properties and Materials
Low Density Polythene
High Density Polythene
Polypropylene Polystyrene Flexible PVC
Santoprene TPR
Nylon 66 Glass Filled Nylon
Silicone Rubber
Acetal ABS
Specific Gravity .915-.924 .941-.965 0.90-0.91 1.03-1.05 1.14-1.45 0.98 1.13-1.14 1.39 1.10-1.14 1.41 1.01-1.10
Operating Temperature: oC Minimum
oC Maximum
-30o
50o
-60o
60o
-25o
110o
-20o
65o
STD
-35o
149o
HT
-35o
190o
-40o
90o
-40o
100o
-40o
100o
-60o
260o
-50o
90o
93o
Elongation % 50-850 200-800 220-600 1-60 200-500 375-390 60-300 3 300-800 15-75 10-40
Tensile Bar Strength PSI
62-158 600-2,300
117-378 1,700-5,500
275-378 4,000-5,500
3,000 7,000
69-241 1,000-3,500
980 1,100
688-812 10,000-11,800
1,720 25,000
1,230-1,250
607-688 8,825-10,000
206-619 3,000-9,000
Water Absorption % 0.01 0.01 0.03 0.1-0.75 0.1-0.75 0 1.30 0.60 0 0.22 0.2-0.45
Effect of Sunlight Crazes Rapidly
Crazes Rapidly
Crazes Rapidly
Discolours Slightly
Resistant Very Resistant
Discolours Slightly
Discolours Slightly
Very Resistant
Crazes unless Stabilizied
Discolours Slightly
Effect of Weak Acids Very Resistant
Very Resistant
None Resistant Very Resistant
Resistant Resistant Resistant Resistant Very Resistant
Very Resistant
Effect of Strong Acids Attacked by slowly
oxidising acids
Attacked by slowly
oxidising acids
Attacked by slowly oxidising
acids
Attacked by slowly
oxidising acids
Resistant to most
Resistant Attacked Attacked Resistant Attacked Attacked
Effect of Weak Alkalies
Very Resistant
Very Resistant
None Resistant Very Resistant
Very Resistant
None None Resistant Very Resistant
Very Resistant
Effect of Strong Alkalies
Very Resistant
Very Resistant
Very Resistant
Resistant to most
Very Resistant
Very Resistant
None None Resistant Very Resistant
Very Resistant
Effect of Organic Solvents
Resistant below
60o
Resistant below
80o
Resistant Below
80o
Soluble to most
Attacked by most
Attacked by some
Resists most
Resists most
Resistant Very Resistant
Attacked by some
Effect of Oil/Grease
Attacked by some
Slight Attacked by some
Attacked by some
Attacked by some
Attacked by some
None None Attacked by some
None Slight
*The above figures should be used as a guide only, figures for specific grades and types of material may differ from those shown.
Back to Contents
70
Conversion Table
Millimeters Inches Decimal Millimeters Inches Decimal Millimeters Inches Decimal
0.40 1/16 0.02 8.73 11/32 0.34 17.46 11/16 0.69
0.79 1/32 0.03 9.13 23/64 0.35 17.85 45/64 0.70
1.19 3/64 0.05 9.52 3/8 0.38 18.26 23/32 0.72
1.59 1/16 0.06 9.92 25/64 0.39 18.65 47/64 0.73
1.98 5/64 0.08 10.32 13/32 0.41 19.05 3/4 0.75
2.38 3/32 0.09 10.72 27/64 0.42 19.45 49/64 0.77
2.78 7/64 0.11 11.11 7/16 0.44 19.84 25/32 0.78
3.17 1/8 0.13 11.51 29/64 0.45 20.24 51/64 0.80
3.57 9/64 0.14 11.91 15/32 0.47 20.63 13/16 0.81
3.97 5/32 0.16 12.30 31/64 0.48 21.03 53/64 0.83
4.36 11/64 0.17 12.70 1/2 0.50 21.43 27/32 0.84
4.76 3/16 0.18 13.10 33/64 0.52 21.83 55/64 0.86
5.16 13/64 0.20 13.49 17/32 0.53 22.23 7/8 0.87
5.56 7/32 0.22 13.89 35/64 0.55 22.62 57/64 0.89
5.95 15/64 0.23 14.29 9/16 0.56 23.02 29/32 0.91
6.35 1/4 0.25 14.68 37/64 0.58 23.42 59/64 0.92
6.75 17/64 0.27 15.08 19/32 0.59 23.81 15/16 0.94
7.14 9/32 0.28 15.48 39/64 0.61 24.21 61./64 0.95
7.54 19/64 0.30 15.88 5/8 0.63 24.61 31.32 0.97
7.94 5/16 0.31 16.27 41/64 0.64 25.00 63.64 0.98
8.33 21/64 0.33 16.67 21/32 0.66 25.40 1 1.00
17.07 43/64 0.67
Back to Contents