Standard Pipe

Standard Pipe

For more information, call 800.257.8182 or visit wheatland.com

A Full Line of Pipe Products for Any ApplicationWheatland produces and stocks pipe of ¼–18 nominal sizes in a variety of ASTM standards. SureThread (ASTM A53) and ERW are used for mechanical and pressure applications, and for ordinary uses in steam, water, gas and air lines.

More than 350 different combinations of finish, end treatments and lengths are available on standard pipe. Our standard process is hot-dip galvanization to ASTM A53 requirements.

Standard Pipe: SureThread™ and ERW

Surface finishes include black, passivate, galvanized, uncoated, pickled, pickled and oiled, bare and soluble oil. End finishes include plain end, roll groove, cut groove, threaded and coupled, and threads only (one or both ends).

Documented Quality AssuranceWheatland facilities have quality systems in place and are ISO certified for Quality Management Systems. Strategically located in the U.S., we carry a large inventory and can ship quickly to meet your tight delivery schedules.

¼–18 nominal sizes produced and

stocked in a variety of ASTM standards

Standard hot-dip galvanization to ASTM

A53 requirements

350 combinations of finish, end treatments

and lengths

All Wheatland black and galvanized pipe

(½–6 NPS) is approved for drinking water usage

With a tradition of service and quality that’s 80-plus years strong, Wheatland Tube is the only domestic, full-line producer of continuous weld (CW) and electric resistance weld (ERW) ¼–18 NPS pipe today. Wheatland is also a worldwide leader in hot-dip galvanization technology.

Setting the standard in the standard pipe industry

A53 Electric Resistance Weld Pipe, Type E, Grade B

Suitable for welding, threading

and grooving

Finish options: Black and hot-dip

galvanized

Sizes: Schedule 40,

2–18 NPS

Produced to ASTM A53 / A53M, federal

specification WW-P404 and ASME B36.10M

HYDROSTATIC AND NON-DESTRUCTIVE ELECTRIC TESTING Hydrostatic inspection test pressures for plain-end pipe are listed in Table X 2.2 of the A53 / A53M industry specification. Test pressures are maintained for a minimum of five seconds. Non-destructive electric testing of the weld seam is required on each length of ERW pipe NPS 2 and larger.

DEGREE OF BEND DIAMETER OF MANDREL

90° 12x pipe OD

BENDING TEST (COLD)

TENSILE STRENGTH, MIN. YIELD STRENGTH, MIN.

60,000 psi 35,000 psi

TENSILE REQUIREMENTS

ASTM A53, TYPE E, WEIGHTS AND DIMENSIONS

TRADE SIZE ODNOMINAL WALL

THICKNESS WEIGHT

in. in. lbs. / ft.

2 2.375 0.154 3.66

2 1/2 2.875 0.203 5.80

3 3.500 0.216 7.58

4 4.500 0.237 10.80

5 5.563 0.258 14.63

6 6.625 0.280 18.99

8 8.625 0.322 28.58

10 10.750 0.365 40.52

12 12.750 0.375 49.61

14 14.000 0.375 54.62

16 16.000 0.375 62.64

18 18.000 0.375 70.65

TRADE SIZE OD SCHEDULE 40 SCHEDULE 80

in. Wall (in.) Weight (lbs. / ft.) Wall (in.) Weight

(lbs. / ft.)

1/4 0.54 0.088 0.43 0.119 0.54

3/8 0.675 0.091 0.57 0.126 0.74

1/2 0.84 0.109 0.85 0.147 1.09

3/4 1.05 0.113 1.13 0.154 1.48

1 1.315 0.133 1.68 0.179 2.17

1 1/4 1.66 0.14 2.27 0.191 3

1 1/2 1.900 0.145 2.72 0.2 3.63

2 2.375 0.154 3.66 0.218 5.03

2 1/2 2.875 0.203 5.8 0.276 7.67

3 3.5 0.216 7.58 0.3 10.26

3 1/2 4 0.226 9.12 0.318 12.52

4 4.5 0.237 10.8 0.337 15

ASTM A53, TYPE F, WEIGHTS AND DIMENSIONSThe continuous weld process creates a uniform

grain structure to make bending, cutting and

threading easier

Ideal for applications with frequent threading,

grooving and bending requirements

Finish options: Black, passivate, bare, pickled and oiled, and

hot-dip galvanized

Sizes: ¼–4 NPS

Standard and extra heavy

Produced to ASTM A53 / A53M, federal

specification WW-P404 and ASME B36.10M

FLATTENING TEST (NPS 2 AND GREATER)To test the quality of the weld, we position the weld at 90° from the direction of force and flatten until the OD is ¾ of the original outside diameter. No cracks should occur along the inside or outside surface of the weld.

DEGREE OF BEND DIAMETER OF MANDREL

Standard 90° 12x pipe OD

Close Coiling 90° 8x pipe OD

BENDING TEST (LESS THAN NPS 2)

TENSILE STRENGTH, MIN. YIELD STRENGTH, MIN. ELONGATION IN 2

48,000 psi 30,000 psi Refer to A53 table X 4.1, latest revisions — ASTM A53 / A53M

TENSILE REQUIREMENTS

NOMINAL SIZE

TEST PRESSURE (psi)

1/4 700

1/2 700

3/4 700

1 700

1 1/4 1,200

1 1/2 1,200

2 2,300

2 1/2 2,500

3 2,220

3 1/2 2,030

4 1,900

TEST PRESSURES (GRADE A)

A53 Continuous Weld Pipe, Type F, Grade A

TRADE SIZEDN

DESIGNATOR OD IDWALL

THICKNESSNOMINAL WEIGHT (MASS)

PER UNIT LENGTH

in. mm in. mm in. mm Plain End (lbs. / ft.)

Plain End (kg / m)

Threads & Couplings (lbs. / ft.)

Threads & Couplings (kg / m)

1/4 8 0.540 13.7 0.364 9.2 0.088 2.24 0.43 0.63 0.43 0.63

3/8 10 0.675 17.1 0.493 12.5 0.091 2.31 0.57 0.84 0.57 0.84

1/2 15 0.840 21.3 0.622 15.8 0.109 2.77 0.85 1.27 0.86 1.27

3/4 20 1.050 26.7 0.824 20.9 0.113 2.87 1.13 1.69 1.14 1.69

1 25 1.315 33.4 1.049 26.6 0.133 3.38 1.68 2.50 1.69 2.50

1 1/4 32 1.660 42.2 1.380 35.1 0.140 3.56 2.27 3.39 2.28 3.40

1 1/2 40 1.900 48.3 1.610 40.9 0.145 3.68 2.72 4.05 2.74 4.04

2 50 2.375 60.3 2.067 52.5 0.154 3.91 3.66 5.44 3.68 5.46

2 1/2 65 2.875 73.0 2.469 62.7 0.203 5.16 5.80 8.63 5.85 8.67

3 80 3.500 88.9 3.068 77.9 0.216 5.49 7.58 11.29 7.68 11.35

3 1/2 90 4.000 101.6 3.548 90.1 0.226 5.74 9.12 13.57 9.27 13.71

4 100 4.500 114.3 4.026 102.3 0.237 6.02 10.80 16.07 10.92 16.23

5 125 5.563 141.3 5.047 158.2 0.258 6.55 14.63 21.77 14.90 22.07

6 150 6.625 168.3 6.065 154.1 0.280 7.11 18.99 28.26 19.34 28.58

8 200 8.625 219.1 7.981 202.7 0.322 8.18 28.58 42.55 29.35 43.73

10 250 10.750 273.0 10.020 254.5 0.365 9.27 40.52 60.29 41.49 63.36

12 300 12.750 323.0 12.000 304.8 0.375 9.52 49.61 73.78 51.28 76.21

14 350 14.000 355.6 13.250 336.5 0.375 9.52 54.62 81.25 – –

16 400 16.000 406.4 15.250 387.5 0.375 9.52 62.64 93.17 – –

18 450 18.000 457.0 17.250 438.1 0.375 9.52 70.65 105.10 – –

Mechanical Properties:Grade A: Yield — 30,000 psi [205 MPa] minimum; Tensile — 48,000 psi [330 MPa] minimum.Grade B: Yield — 35,000 psi [240 MPa] minimum; Tensile — 60,000 psi [415 MPa] minimum.

OD OVER UNDER

Outside DiameterNPS 1/8 to 1 ½; DN 6 to 40 1/64 (0.4 mm) 1/64 (0.4 mm)

NPS 2 and up; DN 50 and up 1% 1%

Wall Thickness at Any Point — — 12.5%

Weight — 10% 10%

PERMISSIBLE VARIATIONS — ASTM A53 GRADES A AND B PIPE

STANDARD PIPE SCHEDULE 40 — ASTM A53 GRADES A AND B

TRADE SIZEDN

DESIGNATOR OD IDWALL

THICKNESSNOMINAL WEIGHT (MASS)

PER UNIT LENGTH

in. mm in. mm in. mm Plain End (lbs. / ft.)

Plain End (kg / m)

Threads & Couplings (lbs. / ft.)

Threads & Couplings (kg / m)

1/4 8 0.540 13.7 0.302 7.7 0.119 3.02 0.54 0.80 0.54 0.80

3/8 10 0.675 17.1 0.423 10.7 0.126 3.20 0.74 1.10 0.74 1.10

1/2 15 0.840 21.3 0.549 13.9 0.147 3.73 1.09 1.62 1.09 1.62

3/4 20 1.050 26.7 0.742 18.8 0.154 3.91 1.48 2.20 1.48 2.21

1 25 1.315 33.4 0.957 24.3 0.179 4.55 2.17 3.24 2.19 3.25

1 1/4 32 1.660 42.2 1.278 32.5 0.191 4.85 3.00 4.47 3.03 4.49

1 1/2 40 1.900 48.3 1.500 38.1 0.200 5.08 3.63 5.41 3.65 5.39

2 50 2.375 60.3 1.939 49.3 0.218 5.54 5.03 7.48 5.08 7.55

2 1/2 65 2.875 73.0 2.323 59.0 0.276 7.01 7.67 11.41 7.75 11.52

3 80 3.500 88.9 2.900 73.7 0.300 7.62 10.26 15.27 10.35 15.39

3 1/2 90 4.000 101.6 3.364 85.4 0.318 8.08 12.52 18.63 12.67 18.82

4 100 4.500 114.3 3.826 97.2 0.337 8.56 15.00 22.32 15.20 22.60

EXTRA-HEAVY PIPE SCHEDULE 80 — ASTM A53, TYPE F, GRADE A

Black and galvanized Schedule 40 A53 ERW Grade B trade sizes ¼–8 are FM Approved.

STOCK UP ON NEW SIZESOF SCHEDULE 80 ERW PIPE

Wheatland Tube produces an expanded line of Schedule 80 ERW pipe — both black and hot-dip galvanized. This standard pipe is intended for mechanical and pressure applications and is acceptable for ordinary uses in steam, water, gas and air lines.

Up to 16 NPS available upon request

Seam-annealed to meet ASTM A53 requirements

Can be co-loaded with SureThread™ and

fire sprinkler pipe TRADE SIZE OD NOMINAL WALL WEIGHT

in. in. lbs. / ft.

2 2.375 0.218 5.03

2 1/2 2.875 0.276 7.67

3 3.500 0.300 10.26

4 4.500 0.337 15.00

EXTRA-HEAVY PIPE SCHEDULE 80 — ASTM A53, GRADE B

If you have any questions or want to place an order, please contact your Wheatland customer service representative at 800.257.8182. We’re eager to help you stock up on our new sizes!

[email protected] wheatland.comFollow us on Twitter: @WheatlandTube

700 South Dock Street Sharon, PA 16146P 800.257.8182 F 724.346.7260

WST-031717

Extra-heavy (XH) Schedule 80, ASTM A53, Grade B, ERW Pipe Now Available in 2–4 NPS

OUR PRODUCT LINE JUST GOT

BIGGERERW pipe available in 2–18 NPSWheatland Tube stocks one of the industry’s largest size ranges of ASTM A53, Grade B, ERW pipe. It can be used in a variety of mechanical and pressure applications, as well as in steam, water, gas and air lines. Get the exact size you need from a worldwide leader in pipe and tube manufacturing and technology.



Contact your local rep or call 800.257.8182 for more information.

All ERW sizes21’ and 42’ stock lengths

Hot-dip galvanized (21’ only)

Suitable for welding, threading and grooving

Truck loads or co-loaded with SureThread™ and fire

sprinkler pipe

Other walls and lengths available upon request

Only sizes 2–8 NPS are FM Approved at this time

WST-092217

ASTM A53, GRADE B, ERW EXPANDED SIZE RANGETRADE SIZE OD NOMINAL WALL WEIGHT

in. in. lbs. / ft.

8 8.625 0.322 28.58

10 10.750 0.365 40.52

12 12.750 0.375 49.61

14 14.000 0.375 54.62

16 16.000 0.375 62.64

18 18.000 0.375 70.65

SureThread ASTM A53, Type F, Grade A standard steel pipe is hot-formed, creating a continuous weld and uniform grain that allow for easy threading. Wheatland Tube has used this manufacturing process since 1931 — because nine out of 10 contractors know it’s easier on their tools and easier to install. Know better. Know Wheatland.

Install SureThread on your next project.Learn more at wheatland.com/surethread

SURETHREAD™: MADE FOR MACHINABILITY

THE ONLY CW STANDARD PIPE

Be sure it’s SureThread.Look for the

stencil!



SureThread™ Continuous Weld Standard Steel Pipe: MADE FOR MACHINABILITY

Know better. Know Wheatland.

Visit wheatland.com/surethread for details.

Our process makes yours easier.SureThread standard steel pipe is hot-formed, which means the entire piece is heated during tube formation, not just the edges. Manufacturers heat and then slowly cool the steel in order to toughen it and reduce its brittleness — a process known as annealing. As the coiled steel reaches 2,450° F, rollers bend the steel into a cylindrical shape and the pressure and heat fuse the edges together. There are no flash forms in this process, allowing for a continuous weld. It all adds up to an extremely strong yet easily machinable pipe.

TRADE SIZE OD SCHEDULE 40 SCHEDULE 80

in. WalI (in.) Weight (lbs. / ft.) WalI (in.) Weight (lbs. / ft.)

1/4 0.540 0.088 0.43 0.119 0.54

3/8 0.675 0.091 0.57 0.126 0.74

1/2 0.840 0.109 0.85 0.147 1.09

3/4 1.050 0.113 1.13 0.154 1.48

1 1.315 0.133 1.68 0.179 2.17

1 1/4 1.660 0.140 2.27 0.191 3.00

1 1/2 1.900 0.145 2.72 0.200 3.63

2 2.375 0.154 3.66 0.218 5.03

2 1/2 2.875 0.203 5.80 0.276 7.67

3 3.500 0.216 7.58 0.300 10.26

3 1/2 4.000 0.226 9.12 0.318 12.52

4 4.500 0.237 10.80 0.337 15.00

ASTM A53, TYPE F WEIGHTS AND DIMENSIONS

Available in ¼–4 NPS

Standard hot-dip galvanization to ASTM A53 requirements

More than 350 combinations of finish, end treatments and lengths

Custom lengths

Ready for fast-turn delivery

All Wheatland black and galvanized pipe (½–6 NPS) is approved for

drinking water usage

WST-120416SureThread is a trademark of Wheatland Tube.

THE ONLY CW STANDARD PIPE

SureThread™: Made for Machinability

Easier on your tools SureThread’s uniform grain pattern and smooth surface cause less wear and tear on tools and dies than ERW pipe. In a recent survey of contractors, 72 percent of respondents indicated they believe SureThread is easier on tools. A new engineering study confirms their belief as fact: Threading tools use 22 percent less wattage while threading SureThread (compared to ERW pipe).

Easier on your budget The uniformity of SureThread’s grain and shape ensures that it moves more easily through the teeth of a die.

Available in ¼–4 NPS

More than 350 combinations of finish, end

treatments and lengths

Ready for fast-turn delivery

All Wheatland black and

galvanized pipe (½–6 NPS) is approved for

drinking water usage 22%

less wattage used during threading than ERW

Not all pipe is the same, and it’s important to know the differences. Wheatland’s SureThread continuous weld standard pipe is easier to work than electric resistance weld (ERW) pipe because its uniform grain structure makes it easier to bend, cut and thread. That means it lasts longer, keeps costs down, and reduces wear and tear. Learn more about why contractors prefer SureThread over ERW.

Know better. Know Wheatland.

For more information, call 800.257.8182 or visit wheatland.com/surethread

One survey respondent said his dies only last for four or five jobs when he uses certain ERW and imported pipe. Such frequent replacement dramatically increases costs. Fortunately, the efficiency of SureThread helps you save money on every job.

Easier on your team SureThread’s physical properties and good machinability mean less labor in the field or in the shop — it’s easier to bend, cut and thread, thanks to its uniform grain pattern and smooth surface. In the previously mentioned contractor survey, nearly

70 percent of respondents indicated they prefer working with SureThread over ERW pipe. Specifically, 64 percent credited its easy threadability.

70% preferworking with SureThread over ERW pipe

Be sure it’s SureThread. Look for the stencil!

Know better. Know Wheatland. For more information, call 800.257.8182 or visit wheatland.com/surethread

Cold-formed

ERW pipe is cold-formed, which means the coiled steel is

first bent by rollers into a cylindrical shape. Then the edges

alone are heated to 2,600° F by revolving copper discs that

serve as electrodes, creating a fusion weld. Finally, flash is

removed from the OD.

Hot-formed

SureThread is hot-formed, which means the entire piece of

steel is heated during tube formation, not just the edges.

Manufacturers heat and then slowly cool the steel in order

to toughen it and reduce its brittleness — a process known as

annealing. As the coiled steel reaches 2,450° F, rollers bend

the steel into a cylindrical shape and the pressure and heat

fuse the edges together. There are no flash forms in

this process.

The SureThread difference: It’s all in the manufacturingYou can see and feel the differences between SureThread and ERW pipe — think of cutting lean steak along the grain versus cutting through gristle. And it all starts with how the two types of pipe are manufactured.

SureThread pipe by Wheatland TubeWhile both ERW and SureThread pipe meet industry standards, Wheatland Tube recognizes the great benefits of using

SureThread continuous weld standard pipe, especially for smaller OD pipe and applications requiring considerable fabrication.

That’s why we’re dedicated to producing a range of SureThread pipe that meets your needs for every job. When you spec

SureThread by Wheatland Tube, you know you’re getting better efficiency, better durability and better results.

Uniform grain pattern throughout entire pipe

Stronger / more ductile

Smooth weld seam

SURETHREAD STANDARD PIPE

Irregular grain pattern

Harder / more brittle

Bump at weld seam

Weld seam has different metal properties than rest of pipe

ERW STANDARD PIPE

SureThread is a trademark of Wheatland Tube.


WST-120416


MIC SHIELD™ Antimicrobial Coating

What is MIC?Microbiologically influenced corrosion (MIC) is a problem for the long-term health of fire sprinkler and standard pipes. It’s caused when unseen biological organisms called microbes gather to accelerate corrosion on the surface of alloys, including copper, ductile iron, black and galvanized steel, and stainless steel. They leave behind nasty sludge and bacteria that can attack pipe wall integrity, damage water supply and cause full system failure.

Stop MIC before it startsWheatland Tube has you — and your black steel pipes — covered with our MIC SHIELD antimicrobial coating. MIC SHIELD acts as both a rinsing agent and adhesive to limit corrosion from microbes. MIC SHIELD is applied in-line during pipe manufacturing and stands up to all fabrication processes.

MIC SHIELD availabilityWheatland Tube’s MIC SHIELD coating is available on all black steel standard and fire sprinkler pipe in NPS 1–4 Schedule 40 SureThread™, NPS 2–6 Schedule 40 and all NPS 1–8* sprinkler products.

*NPS 8 Schedule 40 is available upon request.SureThread is a trademark of Wheatland Tube.

Count on protection that starts in the mill. For more information, call your local distributor or

your Wheatland Tube representative. Or, call 800.257.8182.


WFS-120416


4/27/17

Pipe Coatings

Standard Pipe Coating - CW & ERW Pipe (Black Acrylic Water Base Paint)

A special quick drying black water based paint is sprayed around the outside of the as-welded pipe. This

coating acts as a barrier and insulates the steel from the surrounding atmosphere, thereby providing about 6

months rust protection to the OD during outside storage, depending on weather conditions. Some end users

paint directly over the water based paint, after light surface preparation1.

Bare Pipe - No Coating

The as welded pipe is not protected at all against rust and will in fact be rusty upon arrival.

Pickled & Oiled – Procedure @ Sharon Tube

Pipe is pickled in a dilute sulfuric acid tank to remove the scale from the steel surface, then double rinsed and

dipped into a 12% to 16% soluble oil tank (the remaining % is water). This provides about 1 month inside

storage protection from rust (depending on conditions). This coating is not intended to protect the pipe against

rust if stored outside. Wheatland stocks very little of this P&O pipe due to the short shelf life.

Pickled & Oiled – Including Phosphate – Procedure @ Sharon Tube

Pipe is pickled in a dilute sulfuric acid tank to remove the scale from the steel surface, double rinsed and then

dipped in a phosphate tank to provide extra protection against rust. Then the pipe is dipped into a 12% to 16%

soluble oil tank (the remaining % is water). This provides about one to two months inside storage protection

from rust (depending on conditions). This coating is not intended to protect the pipe against rust if stored

outside. Wheatland stocks very little of this P&O (including phosphate) pipe due to the short shelf life.

Galvanized Pipe

Wheatland’s hot-dipped galvanizing process is fairly straight forward. The pipe is submerged in a pickle tub to

remove all the scale and rust, both inside and out. The pipe is rinsed and then dunked in a pre-flux to ensure

good adhesion of the zinc. The bare pipe is then submerged into a kettle of molten zinc. It then passes through

an outside diameter air wiper for a uniform finish. The inside diameter is then blown clean with a blast of hot

steam. The pipe cools on a cooling rack on the way to the white rust inhibitor bath.

1Painting Recommendations

The black water based coating can be painted with a wide range of topcoats. In all cases the surface of the

coated pipe should be thoroughly cleaned to remove oil, dirt, grease, and any other debris prior to applying a

topcoat. Please refer to any and all guidelines on surface preparation, application, and compatibility supplied by

the topcoat manufacturer.

NPS Matl. #Pcs.

Per LiftWgt/Ft

Ftg/Lft -

21'NPS Matl. #

Pcs.

Per LiftWgt/Ft

Ftg/Lft -

21'NPS Matl. #

Pcs.

Per LiftWgt/Ft

Ftg/Lft -

21'NPS Matl. #

Pcs. Per

LiftWgt/Ft

Ftg/Lft -

21'

1/2 00055 127 0.85 2667 1/2 00467 127 0.85 2667 1/2 00144 127 0.85 2667 1/2 00557 127 0.85 2667

3/4 00056 91 1.13 1911 3/4 00468 91 1.13 1911 3/4 00145 91 1.13 1911 3/4 00558 91 1.13 1911

1 00057 70 1.68 1470 1 00469 70 1.68 1470 1 00146 70 1.68 1470 1 00559 70 1.68 1470

1-1/4 00058 51 2.27 1071 1-1/4 00470 51 2.28 1071 1-1/4 00147 51 2.27 1071 1-1/4 00560 51 2.28 1071

1-1/2 00059 44 2.72 924 1-1/2 00471 44 2.73 924 1-1/2 00148 44 2.72 924 1-1/2 00561 44 2.73 924

2 00060 30 3.66 630 2 00472 30 3.68 630 2 00149 30 3.66 630 2 00562 30 3.68 630

2-1/2 00061 20 5.80 420 2-1/2 00473 20 5.82 420 2-1/2 00150 20 5.80 420 2-1/2 00563 20 5.82 420

3 00062 13 7.58 273 3 00474 13 7.62 273 3 00151 13 7.58 273 3 00564 13 7.62 273

3-1/2 00063 10 9.11 210 3-1/2 00152 10 9.11 210 3-1/2 00565 10 9.20 210

4 00064 10 10.80 210 4 00476 10 10.89 210 4 00153 10 10.80 210 4 00566 10 10.89 210

NPS Matl. #Pcs.

Per LiftWgt/Ft

Ftg/Lft -

21'NPS Matl. #

Pcs.

Per LiftWgt/Ft

Ftg/Lft -

21'NPS Matl. #

Pcs.

Per LiftWgt/Ft

Ftg/Lft -

21'NPS Matl. #

Pcs. Per

LiftWgt/Ft

Ftg/Lft -

21'

1/2 02187 91 1.09 1911 1/2 02404 91 1.09 1911 1/2 02276 91 1.09 1911 1/2 02493 91 1.09 1911

3/4 02188 79 1.47 1659 3/4 02405 79 1.48 1659 3/4 02277 79 1.47 1659 3/4 02494 79 1.48 1659

1 02189 44 2.17 924 1 02406 44 2.18 924 1 02278 44 2.17 924 1 02495 44 2.18 924

1-1/4 02190 34 3.00 714 1-1/4 02407 34 3.02 714 1-1/4 02279 34 3.00 714 1-1/4 02496 34 3.02 714

1-1/2 02191 29 3.63 609 1-1/2 02408 29 3.66 609 1-1/2 02280 29 3.63 609 1-1/2 02497 29 3.66 609

2 02192 19 5.02 399 2 02409 19 5.07 399 2 02281 19 5.02 399 2 02498 19 5.07 399

2-1/2 02193 13 7.66 273 2-1/2 02410 13 7.73 273 2-1/2 02282 13 7.66 273 2-1/2 02499 13 7.73 273

3 02194 10 10.25 210 3 02411 10 10.33 210 3 02283 10 10.25 210 3 02500 10 10.33 210

NPS Matl. #Pcs.

Per LiftWgt/Ft Ftg/Lft NPS Matl. #

Pcs.

Per LiftWgt/Ft Ftg/Lft

1/2 00251 127 0.85 1270 1/2 00403 127 0.85 1270

3/4 00252 91 1.13 910 3/4 00404 91 1.13 910

1 00253 70 1.68 700 1 00405 70 1.68 700 Any length other than 21' to be inquired with your Customer Service Rep.

1-1/4 00254 51 2.27 510 1-1/4 00406 51 2.27 510 for availability & minimum order requirement.

1-1/2 00255 44 2.72 440 1-1/2 00407 44 2.72 440

2 00256 30 3.65 300 2 00408 30 3.65 300

2-1/2 00257 20 5.79 200 2-1/2 00409 20 5.79 200

3 00258 13 7.58 130 3 00410 13 7.58 130

4 00260 10 10.79 100 4 00412 10 10.79 100

STANDARD PACKAGING - Surethread Standard and Extra Heavy PipeA53 Type F Sch. 40 Galvanized P.E.

A53 Type F Sch. 80 Galvanized P.E.

A53 Type F Sch. 40 Galvanized T&C

A53 Type F Sch. 80 Galvanized T&C

A53 Type F Sch. 40 Black P.E. A53 Type F Sch. 40 Black T & C

A53 Type F Sch. 80 Black T&C A53 Type F Sch. 80 Black P.E.

A53 Type F Sch. 40 Galvanized TBE - 10'A53 Type F Sch. 40 Black TBE - 10'

** Yellow Indicates "Special -to be inquired"

Revised: 3:20 PM 12/19/2018

NPS Matl. #Pcs.

Per LiftWgt/Ft

Ftg/Lft -

21'NPS Matl. #

Pcs.

Per LiftWgt/Ft

Ftg/Lft -

21'NPS Matl. #

Pcs.

Per LiftWgt/Ft

Ftg/Lft -

21'NPS Matl. #

Pcs. Per

LiftWgt/Ft

Ftg/Lft -

21'

2.375 01248 24 3.66 504 2.375 11248 24 3.66 504 2.375 70645 24 3.66 504 2.375 11330 24 3.66 504

2.875 01249 20 5.80 420 2.875 11267 20 5.80 420 2.875 01287 20 5.80 420 2.875 11331 20 5.80 420

3.500 01250 13 7.58 273 3.500 11268 13 7.58 273 3.500 01323 13 7.58 273 3.500 11332 13 7.58 273

4.500 01252 10 10.80 210 4.500 11270 10 10.80 210 4.500 01286 10 10.80 210 4.500 11334 10 10.80 210

5.5625 01253 7 14.63 147 5.5625 11272 7 14.63 147 5.5625 01324 7 14.63 147 5.5625 11335 7 14.63 147

6.625 01254 5 18.99 105 6.625 11273 5 18.99 105 6.625 01325 5 18.99 105 6.625 11336 5 18.99 105

8.625 01255 5 28.58 105 8.625 11274 5 28.58 105 8.625 01326 5 28.58 105 8.625 11337 5 28.58 105

10 01256 1 40.52 21

12 01257 1 49.61 21

14 01261 1 54.62 21

16 69390 1 62.64 21

18 01259 1 70.65 21

NPS Matl. #Pcs.

Per LiftWgt/Ft

Ftg/Lft -

21'

2.375 02884 24 5.03 504

2.875 02885 20 7.67 420

3.500 01243 13 10.25 273

4.500 02244 10 14.98 210

Please note 42' lengths BLK PE come in the same pieces per lift as 21'.

NPS Matl. #Pcs.


Pcs.


Pcs.


1 21649 70 1.6800 1470 1 70760 70 1.4620 1470 1 72205 91 1.3700 1911

1-1/4 21650 51 2.2700 1071 1-1/4 70761 51 1.9890 1071 1-1/4 72206 61 1.7610 1281

1-1/2 21651 44 2.7200 924 1-1/2 70762 44 2.3700 924 1-1/2 72207 61 2.0330 1281

2 21652 30 3.6500 630 2 70763 30 3.0940 630 2 72208 37 2.6860 777

NPS Matl. #Pcs.


Pcs.


1-1/4 41650 61 1.806 1281 1-1/4 71321 61 1.108 1281

1-1/2 41651 61 2.085 1281 1-1/2 71322 61 1.556 1281

2 41652 37 2.638 777 2 71323 37 1.961 777

2-1/2 41653 30 3.530 630 2-1/2 71324 30 2.504 630

3 41654 19 4.332 399 3 71325 19 3.349 399

4 41656 19 5.613 399 4 71326 19 4.331 399

5 41657 13 7.769 273 6 71328 10 7.996 210

6 41658 10 9.298 210

8 41659 7 16.960 147

GL ASTM A795E Galvanized Mega-Thread ASTM A795E Black P.E.Sch. 40 ASTM A795E Black P.E.

Standard Packaging Requirements -

Contact your Customer Service

Representative at 800-257-8182; website

www.wheatland.com

A53 Type E -Grade B Sch. 40 ERW

Black P.E.


Black R.G.

A53 Type E Grade B Sch. 40 ERW

Galvanized P.E.

A53 Type E Grade B Sch. 40 ERW

Galvanized R.G.

FIRE SPRINKLER PIPE - 21' Lengths

SCHEDULE 10 ASTM A135 Black R.G. Megaflow ASTM A795E Black R.G.

STANDARD PACKAGING - ERW AND SPRINKLER PIPE


Revised: 3:20 PM 12/19/2018

Documents

Standard Pipe