STANDARD WARRANTY - michigan.gov · a different Caterpillar Warranty. ... MACHINE LOCATION ARE THE SOLE RESPONSIBILITY OF THE BUYER. ANALYSIS PROGRAM: The oil sampling schedule listed

STANDARD WARRANTY

NOTE: Standard Warranty is not valid until this Agreement is signed, returned, and received by Michigan CAT TERM 12 months, unlimited hours Caterpillar Model tbd Serial Number tbd

Buyer tbd Warranty Start Date – Original Delivery Date

This Standard Warranty is valid when it has been executed by the Buyer simultaneously with a Michigan CAT Equipment Sales and Security Agreement that is accepted by an Officer of Seller. The Warranty Start Date is the day that the Equipment was delivered to the Buyer. All Warranties begin on the original delivery date regardless

of the date of sale. This warranty applies to the Caterpillar Equipment identified above.

SPECIFIC CONDITIONS WARRANTY PERIOD: For new equipment and attachments installed on such equipment prior to delivery (unless covered by the Caterpillar Work Tool Warranty

statement or another manufacturer's warranty), the warranty period is the number of months or the number of hours specified above in TERMS, whichever occurs first, starting from the original delivery date.

CATERPILLAR WARRANTY: Caterpillar warrants the above equipment sold by it and operating within the geographical area serviced by authorized USA and Canadian dealers to be free from defects in material and workmanship. Caterpillar work tools and certain Caterpillar brand ground engaging tools may be covered under

a different Caterpillar Warranty. Caterpillar Undercarriage, Mobile-trac belts and Caterpillar brand batteries may be covered by a different Caterpillar Warranty.

This warranty is limited to repair or replacement (including both parts and labor) of parts inspected by Michigan CAT Certified Employees that have been determined by

Michigan CAT to be defective in material or workmanship. If a defect is found during the warranty period, Michigan CAT, will, during Michigan CAT's normal working

hours and at a Michigan CAT place of business 1) provide (at Michigan CAT's choice) new, remanufactured or Caterpillar approved repaired parts or assemble components needed to correct the defect 2) replace lubricating oil, filters, grease, air conditioner refrigerant, antifreeze, and other service items only if made unusable by

the defect and 3) provide reasonable and customary labor needed to correct the defect, except in the case of a new replacement engine originally installed by other than a

Caterpillar dealer.

TRANSPORTATION CHARGES: ALL MACHINE TRANSPORTATION COSTS OR FIELD SERVICE TRAVEL EXPENSES TO AND FROM THE

MACHINE LOCATION ARE THE SOLE RESPONSIBILITY OF THE BUYER.

ANALYSIS PROGRAM: THE OIL SAMPLING SCHEDULE LISTED IN THE OMM (OPERATIONS MAINTENANCE MANUAL) MUST BE FOLLOWED. FAILURE TO COMPLY WITH SCHEDULED OIL SAMPLING REQUIREMENTS WILL VOID THIS WARRANTY. IT IS THE BUYERS

RESPONSIBILITY FOR MACHINES NOT COVERED BY A MICHIGAN CAT CUSTOMER SUPPORT AGREEMENT TO TAKE OIL SAMPLES AT THE

PRESCRIBED INTERVALS.

BUYER'S RESPONSIBILITIES: Normal maintenance service including but not limited to oil and filter changes, engine tune-ups, belts and hoses are not covered by

this Warranty. Replacement of items due to normal wear and tear is not covered by this warranty. The Buyer must have the covered equipment checked and serviced in accordance with the manufacturer's recommendations including but not limited to maintaining proper levels of lubricants and coolants. Failure to follow the

manufacturer's recommendations that apply to the Equipment may result in a denial of warranty coverage.

LIMITATIONS: A defect does not include the gradual reduction in operating performance where a failure has not occurred. This warranty is void if the service

meter has been stopped or altered or misrepresents the equipment's actual usage. This warranty does not include repairs due to misuse, abuse, accidents,

collisions, fire, road hazards, theft, riot, explosion, lightning, earthquake, freezing, rust, chemical corrosion, physical or mechanical erosion, windstorm, hail, water or flood, salt, chemicals, vermin, negligence, vandalism, acts of God, or use of the machine beyond its rated capacity or contamination of fluids, fuels,

coolants or lubricants. Michigan CAT is not responsible for failures resulting 1) from any use or installation which Michigan CAT judges improper; 2) from the

use of any attachments, accessory items and parts not sold or approved by Caterpillar; 3) improper repair; 4) users delay in making Equipment available after being notified of a potential product problem; 5) unauthorized repairs or adjustments and unauthorized fuel setting changes. The warranty shall not cover

normally scheduled preventative maintenance or maintenance services, including but not limited to valve lash adjustments and maintenance items including

filters, fuel nozzles, fuel injectors, thermostats, and seals and gaskets. The warranty does not cover the following parts: repair alternator, starter, air compressor, air conditioner, compressor and other bolt on attachments unless required in conjunction with the repair of a covered part. This warranty does not cover storage,

shop supply, or uncommon freight charges.

DISCLAIMER OF WARRANTIES: THE CATERPILLAR WARRANTY IS LIMITED TO CERTAIN RESPONSIBILITIES, ARE SUBJECT TO LIMITATIONS FOR FAILURES

RESULTING FROM CERTAIN SITUATIONS AND ARE SUBJECT TO THE BUYER'S RESPONSIBILITIES. THE CATERPILLAR WARRANTY IS EXPRESSLY IN LIEU OF ANY

OTHER WARRANTIES EXPRESSED OR IMPLIED INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

REMEDIES: CATERPILLAR'S STANDARD WARRANTY IS LIMITED TO THE PROVISION OF MATERIAL AND SERVICES AS SPECIFIED HEREIN. NEITHER MICHIGAN CAT

NOR CATERPILLAR IS RESPONSIBLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. IN NO EVENT SHALL MICHIGAN CAT OR CATERPILLAR BE LIABLE FOR ANY

OTHER LOSSES, DAMAGES, COSTS OR EXPENSES CLAIMED BY THE BUYER INCLUDING BUT NOT LIMITED TO LOSS FROM THE FAILURE OF THE EQUIPMENT TO

OPERATE FOR ANY PERIOD OF TIME AND ALL OTHER DIRECT, INDIRECT OR SPECIAL DAMAGES.

TAXES: Buyer shall pay when due all taxes and assessments (if any) on the repair of the Equipment.

TRANSFERABILITY: This Warranty is not transferable without the expressed written consent of an officer of Michigan CAT who reserves the right not to consent in

its sole discretion.

I HAVE READ AND UNDERSTAND THE TERMS AND CONDITIONS OF THIS WARRANTY WHICH I AFFIRM BY MY SIGNATURE BELOW.

User's Signature

Title

Dealer Representative's Signature

Title

DATE; MICHIGAN CAT

ATTN: WARRANTY OFFICE

24800 NOVI ROAD

NOVI, MI 48375-2414

IF YOU SHOULD HAVE ANY QUESTIONS CONCERNING THESE

WARRANTIES OR OIL SAMPLING PROCEDURES, PLEASE CONTACT

MAURINE WILSON, CORPORATE WARRANTY MANAGER, AT (248) 349-4800 EXT. 4622 Fax: 866-743-4204

TOTAL PLUS EXTENDED WARRANTY FOR NEW MACHINES

NOTE: Standard Warranty is not valid until this Agreement is signed, returned, and received by Michigan CAT TERM This is an optional Warranty offered for an additional

cost. Cost is determined by model of machine and length of

warranty and hours of warranty.

Caterpillar Model tbd Serial Number tbd


This Total Plus Extended Warranty is valid when it has been executed by the Buyer simultaneously with a Michigan CAT Equipment Sales and Security Agreement that is accepted by an Officer of Seller. The Warranty Start Date is the day that the Equipment was delivered to the Buyer. All Warranties begin on the original delivery date

regardless of the date of sale. This warranty applies to the Caterpillar Equipment identified above.

SPECIFIC CONDITIONS WARRANTY PERIOD: For new equipment and attachments installed on such equipment prior to delivery (unless covered by the Caterpillar Work Tool Warranty statement or another manufacturer's warranty), the Standard Warranty period is _ months or hours, whichever occurs first, starting from the original delivery date.

CATERPILLAR WARRANTY: The Michigan CAT Total Plus Extended Warranty includes the Caterpillar Manufacturer’s warranty. Caterpillar warrants the above equipment sold by it and operating within the geographical area serviced by an authorized USA or Canadian dealer to be free from defects in material and workmanship.

The Warranty Period from Caterpillar varies and may be less than Michigan CAT’s warranty period. Caterpillar work tools and certain Caterpillar brand ground engaging

tools may be covered under a different Caterpillar Warranty. Caterpillar Undercarriage and Caterpillar brand batteries may be covered by a different Caterpillar Warranty.

MICHIGAN CAT TOTAL PLUS EXTENDEDWARRANTY: This warranty is limited to repair or replacement (including both parts and labor) of parts inspected by

Michigan CAT Certified Employees that have been determined by Michigan CAT to be defective in material or workmanship. If a defect is found during the warranty period, Michigan CAT, will, during Michigan CAT's normal working hours and at a Michigan CAT place of business 1) provide (at Michigan CAT's choice) new,

remanufactured or Caterpillar approved repaired parts or assemble components needed to correct the defect 2) replace lubricating oil, filters, grease, air conditioner

refrigerant, antifreeze, and other service items only if made unusable by the defect and 3) provide reasonable and customary labor needed to correct the defect, except in the case of a new replacement engine originally installed by someone other than a Caterpillar dealer. No components other than those listed in Attachment “B” or

“C” are covered under the Extended Powertrain and Hydraulic Warranty.



ANALYSIS PROGRAM: The oil sampling schedule listed in the OMM (Operations Maintenance Manual) must be followed to maintain warranty availability.

FAILURE TO COMPLY WITH SCHEDULED OIL SAMPLING REQUIREMENTS WILL VOID THIS WARRANTY. IT IS THE BUYERS

RESPONSIBILITY FOR MACHINES NOT COVERED BY A MICHIGAN CAT CUSTOMER SUPPORT AGREEMENT TO TAKE OIL SAMPLES AT THE PRESCRIBED INTERVALS.

BUYER'S RESPONSIBILITIES: Normal maintenance service including but not limited to oil and filter changes, engine tune-ups, belts and hoses are not covered by this Warranty. Replacement of items due to normal wear and tear is not covered by this warranty. The Buyer must have the covered equipment checked and serviced in

accordance with the manufacturer's recommendations including but not limited to maintaining proper levels of lubricants and coolants. Failure to follow the



meter has been stopped or altered or misrepresents the equipment's actual usage. This warranty does not include repairs due to misuse, abuse, accidents, collisions, fire, road hazards, theft, riot, explosion, lightning, earthquake, freezing, rust, chemical corrosion, physical or mechanical erosion, windstorm, hail,

water or flood, salt, chemicals, vermin, negligence, vandalism, acts of God, or use of the machine beyond its rated capacity or contamination of fluids, fuels,

coolants or lubricants. Michigan CAT is not responsible for failures resulting 1) from any use or installation which Michigan CAT judges improper; 2) from the use of any attachments, accessory items and parts not sold or approved by Caterpillar; 3) improper repair; 4) users delay in making Equipment available after

being notified of a potential product problem; 5) unauthorized repairs or adjustments and unauthorized fuel setting changes. The warranty shall not cover

normally scheduled preventative maintenance or maintenance services, including but not limited to valve lash adjustments and maintenance items including filters, fuel nozzles, fuel injectors, thermostats, and seals and gaskets. The warranty does not cover the following parts: alternator, starter, air compressor, air

conditioner, compressor and other bolt on attachments unless required in conjunction with the repair of a covered part. This warranty does not cover storage,

shop supply, or freight charges.

DISCLAIMER OF WARRANTIES: THE CATERPILLAR AND MICHIGAN CAT WARRANTY ARE LIMITED TO CERTAIN RESPONSIBILITIES, ARE SUBJECT TO

LIMITATIONS FOR FAILURES RESULTING FROM CERTAIN SITUATIONS AND ARE SUBJECT TO THE BUYER'S RESPONSIBILITIES. THE CATERPILLAR AND MICHIGAN

CAT WARRANTY IS EXPRESSLY IN LIEU OF ANY OTHER WARRANTIES EXPRESSED OR IMPLIED INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS

FOR A PARTICULAR PURPOSE.

REMEDIES: MICHIGAN CAT’S STANDARD WARRANTY AND CATERPILLAR'S WARRANTY ARE LIMITED TO THE PROVISION OF MATERIAL AND SERVICES AS

SPECIFIED HEREIN. NEITHER MICHIGAN CAT NOR CATERPILLAR IS RESPONSIBLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. IN NO EVENT SHALL

MICHIGAN CAT OR CATERPILLAR BE LIABLE FOR ANY OTHER LOSSES, DAMAGES, COSTS OR EXPENSES CLAIMED BY THE BUYER INCLUDING BUT NOT LIMITED TO

LOSS FROM THE FAILURE OF THE EQUIPMENT TO OPERATE FOR ANY PERIOD OF TIME AND ALL OTHER DIRECT, INDIRECT OR SPECIAL DAMAGES.



its sole discretion. I HAVE READ AND UNDERSTAND THE TERMS AND CONDITIONS OF THIS MICHIGAN CAT WARRANTY WHICH I AFFIRM BY MY SIGNATURE BELOW.

User's Signature Title

Dealer Representative's Signature Title

DATE: MICHIGAN CAT


24800 NOVI ROAD

NOVI, MI 48375-2414




STANDARD WARRANTY WITH EXTENDED

POWERTRAIN and HYDRAULIC WARRANTY FOR NEW MACHINES

NOTE: Standard Warranty is not valid until this Agreement is signed, returned, and received by Michigan CAT TERM ** This is offered as an Optional Warranty for an

additional Cost. Cost dependent upon model of unit and the

length of time and / or hours purchased.



This Standard Warranty with Extended Powertrain and Hydraulic Warranty is valid when it has been executed by the Buyer simultaneously with a Michigan CAT Equipment Sales and Security Agreement that is accepted by an Officer of Seller. The Warranty Start Date is the day that the Equipment was delivered to the Buyer. All

Warranties begin on the original delivery date regardless of the date of sale. This warranty applies to the Caterpillar Equipment identified above.

SPECIFIC CONDITIONS WARRANTY PERIOD: For new equipment and attachments installed on such equipment prior to delivery (unless covered by the Caterpillar Work Tool Warranty statement or another manufacturer's warranty), the Standard Warranty period is 12 months or 5000 hours, whichever occurs first, starting from the original delivery date.

The Extended Powertrain and Hydraulic Warranty brings coverage of the components listed in ATTACHMENT “B” and ATTACHMENT “C” to a total of __ months or

___ hours whichever comes first . No components other than those listed in Attachment “B” and Attachment “C” are covered under the Extended Powertrain and Hydraulic Warranty.

CATERPILLAR WARRANTY: The Michigan CAT Standard Warranty With Extended Powertrain and Hydraulic Warranty includes the Caterpillar Manufacturer’s warranty. Caterpillar warrants the above equipment sold by it and operating within the geographical area serviced by an authorized USA or Canadian dealer to be free

from defects in material and workmanship. The Warranty Period from Caterpillar varies and may be less than Michigan CAT’s warranty period. Caterpillar work tools

and certain Caterpillar brand ground engaging tools may be covered under a different Caterpillar Warranty. Caterpillar Undercarriage, Mobil-trac belts and Caterpillar brand batteries may be covered by a different Caterpillar Warranty.

MICHIGAN CAT STANDARD WARRANTY WITH EXTENDED POWERTRAIN AND HYDRAULIC WARRANTY: This warranty is limited to repair or replacement (including both parts and labor) of parts inspected by Michigan CAT Certified Employees that have been determined by Michigan CAT to be defective in

material or workmanship. If a defect is found during the warranty period, Michigan CAT, will, during Michigan CAT's normal working hours and at a Michigan CAT

place of business 1) provide (at Michigan CAT's choice) new, remanufactured or Caterpillar approved repaired parts or assemble components needed to correct the defect 2) replace lubricating oil, filters, grease, air conditioner refrigerant, antifreeze, and other service items only if made unusable by the defect and 3) provide reasonable and

customary labor needed to correct the defect, except in the case of a new replacement engine originally installed by someone other than a Caterpillar dealer. No

components other than those listed in Attachment “B” and Attachment “C” are covered under the Extended Powertrain and Hydraulic Warranty.



ANALYSIS PROGRAM: The oil sampling schedule in listed in the OMM (Operations Maintenance Manual) must be followed to maintain warranty

availability. FAILURE TO COMPLY WITH SCHEDULED OIL SAMPLING REQUIREMENTS WILL VOID THIS WARRANTY. IT IS THE BUYERS RESPONSIBILITY FOR MACHINES NOT COVERED BY A MICHIGAN CAT CUSTOMER SUPPORT AGREEMENT TO TAKE OIL SAMPLES AT THE

PRESCRIBED INTERVALS.

BUYER'S RESPONSIBILITIES: Normal maintenance service including but not limited to oil and filter changes, engine tune-ups, belts and hoses are not covered by

this Warranty. Replacement of items due to normal wear and tear is not covered by this warranty. The Buyer must have the covered equipment checked and serviced in

accordance with the manufacturer's recommendations including but not limited to maintaining proper levels of lubricants and coolants. Failure to follow the manufacturer's recommendations that apply to the Equipment may result in a denial of warranty coverage.

LIMITATIONS: A defect does not include the gradual reduction in operating performance where a failure has not occurred. This warranty is void if the service meter has been stopped or altered or misrepresents the equipment's actual usage. This warranty does not include repairs due to misuse, abuse, accidents,

collisions, fire, road hazards, theft, riot, explosion, lightning, earthquake, freezing, rust, chemical corrosion, physical or mechanical erosion, windstorm, hail,

water or flood, salt, chemicals, vermin, negligence, vandalism, acts of God, or use of the machine beyond its rated capacity or contamination of fluids, fuels, coolants or lubricants. Michigan CAT is not responsible for failures resulting 1) from any use or installation which Michigan CAT judges improper; 2) from the

use of any attachments, accessory items and parts not sold or approved by Caterpillar; 3) improper repair; 4) users delay in making Equipment available after

being notified of a potential product problem; 5) unauthorized repairs or adjustments and unauthorized fuel setting changes. The warranty shall not cover normally scheduled preventative maintenance or maintenance services, including but not limited to valve lash adjustments and maintenance items including

filters, fuel nozzles, fuel injectors, thermostats, and seals and gaskets. The warranty does not cover the following parts: alternator, starter, air compressor, air

conditioner, compressor and other bolt on attachments unless required in conjunction with the repair of a covered part. This warranty does not cover storage, shop supply, or freight charges.










TRANSFERABILITY: This Warranty is not transferable without the expressed written consent of an officer of Michigan CAT who reserves the right not to consent in its sole discretion.

I HAVE READ AND UNDERSTAND THE TERMS AND CONDITIONS OF THIS MICHIGAN CAT WARRANTY WHICH I AFFIRM BY MY SIGNATURE BELOW.



DATE: MICHIGAN CAT


24800 NOVI ROAD

NOVI, MI 48375-2414




STANDARD WARRANTY WITH EXTENDED POWERTRAIN WARRANTY FOR NEW MACHINES

NOTE: Standard Warranty is not valid until this Agreement is signed, returned, and received by Michigan CAT TERM This is an optional warranty offered for an additional

cost. Cost dependent upon model of machine and length of time

and hours purchased.



This Standard Warranty with Extended Powertrain Warranty is valid when it has been executed by the Buyer simultaneously with a Michigan CAT Equipment Sales and Security Agreement that is accepted by an Officer of Seller. The Warranty Start Date is the day that the Equipment was delivered to the Buyer. All Warranties begin on

the original delivery date regardless of the date of sale. This warranty applies to the Caterpillar Equipment identified above.

SPECIFIC CONDITIONS WARRANTY PERIOD: For new equipment and attachments installed on such equipment prior to delivery (unless covered by the Caterpillar Work Tool Warranty statement or another manufacturer's warranty), the Standard Warranty period is 12 months or 5000 hours, whichever occurs first, starting from the original delivery date.

The Extended Powertrain Warranty brings coverage of the components listed in ATTACHMENT “B” to a total of __months or ___ hrs whichever comes first. No

components other than those listed in Attachment “B” are covered under the Extended Powertrain Warranty.

CATERPILLAR WARRANTY: The Michigan CAT Standard Warranty With Extended Powertrain Warranty includes the Caterpillar Manufacturer’s warranty.

Caterpillar warrants the above equipment sold by it and operating within the geographical area serviced by an authorized USA or Canadian dealer to be free from defects in material and workmanship. The Warranty Period from Caterpillar varies and may be less than Michigan CAT’s warranty period. Caterpillar work tools and certain

Caterpillar brand ground engaging tools may be covered under a different Caterpillar Warranty. Caterpillar Undercarriage, Mobil-trac belts and Caterpillar brand batteries

may be covered by a different Caterpillar Warranty.

MICHIGAN CAT STANDARD WARRANTY WITH EXTENDED POWERTRAIN WARRANTY: This warranty is limited to repair or replacement (including

both parts and labor) of parts inspected by Michigan CAT Certified Employees that have been determined by Michigan CAT to be defective in material or workmanship. If a defect is found during the warranty period, Michigan CAT, will, during Michigan CAT's normal working hours and at a Michigan CAT place of business 1) provide

(at Michigan CAT's choice) new, remanufactured or Caterpillar approved repaired parts or assemble components needed to correct the defect 2) replace lubricating oil,

filters, grease, air conditioner refrigerant, antifreeze, and other service items only if made unusable by the defect and 3) provide reasonable and customary labor needed to correct the defect, except in the case of a new replacement engine originally installed by someone other than a Caterpillar dealer. No components other than those listed

in Attachment “B” are covered under the Extended Powertrain Warranty.



ANALYSIS PROGRAM: The oil sampling schedule listed in the OMM (Operations Maintenance Manual) must be followed to maintain warranty availability.

FAILURE TO COMPLY WITH SCHEDULED OIL SAMPLING REQUIREMENTS WILL VOID THIS WARRANTY. IT IS THE BUYERS

RESPONSIBILITY FOR MACHINES NOT COVERED BY A MICHIGAN CAT CUSTOMER SUPPORT AGREEMENT TO TAKE OIL SAMPLES AT THE PRESCRIBED INTERVALS.

BUYER'S RESPONSIBILITIES: Normal maintenance service including but not limited to oil and filter changes, engine tune-ups, belts and hoses are not covered by this Warranty. Replacement of items due to normal wear and tear is not covered by this warranty. The Buyer must have the covered equipment checked and serviced in

accordance with the manufacturer's recommendations including but not limited to maintaining proper levels of lubricants and coolants. Failure to follow the



meter has been stopped or altered or misrepresents the equipment's actual usage. This warranty does not include repairs due to misuse, abuse, accidents, collisions, fire, road hazards, theft, riot, explosion, lightning, earthquake, freezing, rust, chemical corrosion, physical or mechanical erosion, windstorm, hail,

water or flood, salt, chemicals, vermin, negligence, vandalism, acts of God, or use of the machine beyond its rated capacity or contamination of fluids, fuels,

coolants or lubricants. Michigan CAT is not responsible for failures resulting 1) from any use or installation which Michigan CAT judges improper; 2) from the use of any attachments, accessory items and parts not sold or approved by Caterpillar; 3) improper repair; 4) users delay in making Equipment available after

being notified of a potential product problem; 5) unauthorized repairs or adjustments and unauthorized fuel setting changes. The warranty shall not cover

normally scheduled preventative maintenance or maintenance services, including but not limited to valve lash adjustments and maintenance items including filters, fuel nozzles, fuel injectors, thermostats, and seals and gaskets. The warranty does not cover the following parts: radiator, alternator, starter, air compressor,

air conditioner, compressor and other bolt on attachments unless required in conjunction with the repair of a covered part. This warranty does not cover storage,

shop supply, or freight charges.











its sole discretion. I HAVE READ AND UNDERSTAND THE TERMS AND CONDITIONS OF THIS MICHIGAN CAT WARRANTY WHICH I AFFIRM BY MY SIGNATURE BELOW.



DATE: MICHIGAN CAT


24800 NOVI ROAD

NOVI, MI 48375-2414




Equipment Protection Plans are the only service

plans designed speci�cally for buyers of new Cat®

machines, providing the highest level of repair cost

protection available. Backed by the worldwide

resources of Caterpillar, Equipment Protection Plans

will enhance and sustain your entire ownership

experience with comprehensive coverage and peace of

mind.

You buy the best in heavy equipment and machinery

because you can count on it to get the job done.

Caterpillar® secures your investment with a standard

Warranty that provides six to 12 months of worry-free

operation. But the lifespan of Cat machines well exceeds

that timeframe, so your Cat Dealer o�ers Equipment

Protection Plans, which protect you for the long haul.

Equipment Protection Plans wrap around the factory

warranty, ensuring that your investment is safeguarded

beyond the standard warranty period.

With three levels of coverage, you choose the

option that best suits your needs and your budget -

whether Powertrain, Powertrain+Hydraulics, or our most

comprehensive coverage, Premier. Each will add valuable

years and hours of operation to your standard warranty

period, keeping major repair costs from negatively

impacting your bottom line.

From earthmoving construction equipment to

quarry and mining machines, Equipment Protection

covers parts and labor or parts only, with no deductible,

in material and workmanship.

Protection Plans strengthen the resale value of your

equipment. Because trained dealer personnel use

Cat parts to perform Equipment Protection Plans repair,

machines and engines have a documented, demonstrated

maintenance record when they go to the used market.

COUNT ON CAT TO PROTECT YOUR INVESTMENT WITH CAT EQUIPMENT PROTECTION PLANS

Dealer Responsibilities:

> Perform necessary inspections to con�rm eligibility.

> Install only Caterpillar approvedparts on covered repairs.

> Validate your enrollment in the program.

Customer Responsibilities:

> Operate the equipment according to the CaterpillarOperation & Maintenance Manual.

> Have recommended preventativemaintenance performed at service intervals specified in theOperation & Maintenance Manual.

> Upon request, provide proof of preventative maintenancecompliance. Proof can includereceipts, copies of work orders or invoices.

> Promptly provide the machine forrepair in the event of a coveredcomponent failure.

COVERAGE OPTIONS

> Powertrain

Powertrain components produce, transmit or controlengine horsepower for moving the machine. Coverageincludes several major Powertrain component categories.

> Powertrain+Hydraulics

Coverage includes Powertrain components (see below)as well as specified hydraulic system parts andcomponents. Hydraulic components are associatedwith steering and implement control.

Basic engine & transmission

Torque converter/divider

Drive line/differential

Certain electronic controls & sensors

Undercarriage components*

Alternator & starter

Radiator*

CO

VER

EDEX

CLU

DED

Hydraulic/steering hoses & lines

Hydraulic quick-couplers & swivels

Hydraulic tanks/oil filter base

Hydraulic pumps & motors

Hydraulic valves & controls

Hydraulic cylinders

Winch pumps & valves

Hydraulic brake system parts

Hydraulic actuated worktools & attachments

CO

VER

EDEX

CLU

DED

> Premier

Our most comprehensive coverage option, Premier coverage includes Powertrain components,Powertrain+Hydraulics components (see below) aswell as additional powertrain, hydraulic, electrical andstructural components.

Radiator & mu�er

Undercarriage non-moving components*

External hoses and lines for oil, water & air

Hydraulic brake system components

Electric system

Machine electronic controls

Moving undercarriage components

Service items

Maintenance items with other warranty statement

Items not included under Standard Machine Warranty

CO

VER

EDEX

CLU

DED

Note: Above are partial lists of machine components thatare protected or excluded by the Equipment ProtectionPlan. The actual Dealer contract will govern.

Structures

Work tools

* Special coverage de�nitions apply for compact products

for defects in material and workmanship. Equipment

®

¨

POWERTRAINPowertrain components produce, transmit or control engine horsepower for moving the machine. Coverage includes several major Powertrain component categories.Basic EngineDi�erentialDi�erential Steering ComponentsDrive Line/Drive Axle ComponentsEngine Electronic Controls & SensorsFinal DrivesFuel Injection ComponentsHydraulic Oil CoolersHydraulic Drive Pumps & MotorsHydrostatic Hydraulic Propel Drive MotorSteering Brake Components (Internal)Steering Clutch ComponentsTorque Converter /DividerTransfer Gear GroupTransmissionTransmission Oil Pump, Controls & ValvesUnit Injector Hydraulic PumpVibratory Motor & Pump

Basic EngineDi�erentialDi�erential Steering ComponentsDrive Line/Drive Axle ComponentsEngine Electronic Controls & SensorsFinal DrivesFuel Injection ComponentsHydraulic Oil CoolersHydraulic Drive Pumps & MotorsHydrostatic Hydraulic Propel Drive MotorSteering Brake Components (Internal)Steering Clutch ComponentsTorque Converter /DividerTransfer Gear GroupTransmissionTransmission Oil Pump, Controls & ValvesUnit Injector Hydraulic PumpVibratory Motor & Pump

Basic EngineDi�erentialDi�erential Steering ComponentsDrive Line/Drive Axle ComponentsEngine Electronic Controls & SensorsFinal DrivesFuel Injection ComponentsHydraulic Oil CoolersHydraulic Drive Pumps & MotorsHydrostatic Hydraulic Propel Drive MotorSteering Brake Components (Internal)Steering Clutch ComponentsTorque Converter /DividerTransfer Gear GroupTransmissionTransmission Oil Pump, Controls & ValvesUnit Injector Hydraulic PumpVibratory Motor & Pump

Brake ComponentsElectrical > Drive Train Electronic Controls - Electric System - Implement Electronic Controls - Machine Electronic Controls - Protection Devices & Alarms > Wiring HarnessesEngine Attachments > Alternator > StarterExternal HosesMu�erRadiatorStructures > Guards > Operator’s Compartment >SuspensionUndercarriage Non-Moving Components

Hydraulic AccumulatorsHydraulic CylindersHydraulic Hoses & LinesHydraulic Oil Filter BasesHydraulic Pumps & MotorsHydraulic Quick-Couplers and SwivelsHydraulic Release, Drop & Change ValvesHydraulic TanksHydraulic Valves & ControlsSteering and Implement Coolers & PumpsSwing Gear

Our most comprehensive coverage option, Premier coverage includes Powertrain+Hydraulics components, as well as additional electrical and structural components.

Coverage includes Powertrain components , as well as speci�ed hydraulic system parts and components. Hydraulic components are associated with steering and implement control.

PREMIER

Hydraulic AccumulatorsHydraulic CylindersHydraulic Hoses & LinesHydraulic Oil Filter BasesHydraulic Pumps & MotorsHydraulic Quick-Couplers and SwivelsHydraulic Release, Drop & Change ValvesHydraulic TanksHydraulic Valves & ControlsSteering and Implement Coolers & PumpsSwing Gear

Note: This is a partial list of machine components that are protected by Equipment Protection Plans. The actual Dealer contract will govern.

NEW CAT® EQUIPMENT PROTECTION PLAN COVERED COMPONENTS

New Cat® Equipment Protection Plans are designed specifically for new Cat machines and will enhance and sustain your entire ownership experience with comprehensive coverage and peace of mind. With three levels of coverage, you choose the option that best suits your needs and your budget - whether it’s Powertrain, Powertrain+Hydraulics or Premier. Each will add valuable years and hours of operation past your standard warranty period, keeping major repair costs from negatively impacting your bottom line.

POWERTRAIN+HYDRAULICS

CAT, CATERPILLAR, VIMS™ System, their respective logos, “Caterpillar Yellow” and the POWER EDGE trade dress, as wellas corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

AEXQ 0142-01 ©2008 Caterpillar. All Rights Reserved.

The information contained herein is provided solely for general informational purposes only and is not intended to be a solicitation or an offer to sell any insurance product or service, nor is the information a complete description of all the terms, conditions and exclusions applicable to the products and services described. For complete descriptions of the terms, conditions and exclusions of the insurance coverage, or other products or services, please contact us. The products and services referred to herein may not be available in all jurisdictions.

Top copy – Corporate; Bottom copy - Customer

Service Workmanship Agreement

Michigan CAT warrants the following repair to be free from defects in material and workmanship for six months from WORK

ORDER completion.

Our obligation under this warranty shall be limited to, as an exclusive remedy, repair or replacement including both parts and labor

of any part which in our sole judgment is found to be defective in material or workmanship within the warranty period. All re pairs

or replacements must be performed at the Michigan CAT service department that originally performed the work or other such

locations as seller and purchaser may mutually agree. The intent of this warranty is not to restore failed components to like -new

condition, but rather to repair or replace only the failed components covered by the warranty. This warranty is limited to the repair

or replacement, whichever Michigan CAT elects, of any part which is found upon Michigan CAT inspection to be defective in

material or workmanship, along with the labor of such new or repaired part s. Such parts and labor will be provided without charge

to the customer during normal working hours at a Michigan CAT place of business or other establishment authorized by Michigan

CAT. This warranty does not include costs for transporting the machine to such place of business or establishment. This warranty

DOES NOT COVER TRAVEL TIME, R & I, OVERTIME LABOR, ANY MACHINE TRANSPORTATION COSTS OR PARTS

FREIGHT CHARGES.

______________________________ __________________ _____________________________ ________________________

REGISTERED MACHINE MODEL SERIAL NUMBER COMPONENT SERIAL NUMBER DESCRIPTION

___________________________ Delivery Date_________ Machine Hours__________

WORK ORDER INVOICE # Expiration Date:_______ Machine Hours__________

ACKNOWLEDGED:_______________________________________ ACCEPTED:_____________________________________________

Customer MICHIGAN CAT Product Support Manager

Remedies under the warranty are expressly limited to the free parts and labor specifically provided. Michigan CAT shall in no event be liable for any other losses,

damages, costs, or expenses claimed by you including losses from failure of the machine to operate for any period of time, an d all other direct, indirect, special,

incidental, or consequential damages, including all personal injury and property damage due to alleged negligence or strict liability of Michigan CAT

The extended warranty coverage shall not be applicable by Caterpillar, Inc. Product Improvement Programs. THE EXTENDED WARRANTY SET FORTH ABOVE IS

IN LIEU OF ALL OTHER WARRANTIES BY MICHIGAN CAT EXPRESS OR IMPLIED BY LAW. WITHOUT LIM ITING THE GENERALITY OF THE

FORGOING, MICHIGAN CAT MAKES NO WARRANTY OF MERCHANTABILITY OR FITNESS OF THE MACHINE FOR ANY PARTICULAR PURPOSE.

Our representatives may not change the forgoing warranty and purchaser's acceptance of the product acknowledges familiarity with the terms a nd conditions of this

warranty.

CUSTOMER RESPONSIBILITIES:

1. Customer shall be responsible for compliance with all

recommendations included in the Caterpillar Lubrication and

Maintenance Guide for the model covered.

2. Customer is solely responsible to perform all maintenance service

(such as engine tune-ups, adjustments, the replacement of injector

nozzles, belts and filters) or normal replacement of service wear

items.

3. Customer shall be responsible for scheduled oil samples on each

oil compartment at time of recommended maintenance and shall

timely provide Michigan CAT copies of reports at each interval.

4. Customer shall be responsible for giving timely notice of

warrantable failure and promptly making machine available for

repair.

5. Customer shall make machine available for inspection during the

warranty period on reasonable notice from Michigan CAT.

6. Customer shall be responsible for travel time, mileage, overtime

labor, and machine transportation costs and parts freight charges.

7. Customer shall be responsible for removal and installation of

component and system cleanout. Customer must confirm that oil

coolers meet Caterpillar reusability guidelines.

8. The service-hour meter must be maintained in good condition

and Michigan CAT must be notified in writing if meter is

changed or set back.

LIMITATIONS AND EXCLUSIONS:

1. All items not specifically listed "as covered" are excluded.

2. Items eligible for coverage are those defined in "VA. Extended

Warranty" as defined by Caterpillar as Powertrain Components.

Ask your Product Support representative for a detailed list of

covered components. (Bulletin 4.3)

3. Michigan CAT shall not be obligated to make any repairs

necessitated by misuse, abuse, accident, negligence or use of

machine beyond its rated capacities.

4. The machine may not be altered or modified in any manner which

effects the mechanical operation of the machine as designed by

Caterpillar, Inc.

5. Repairs made by Michigan CAT pursuant to this warranty

coverage shall not extend the stated warranty period.

6. Loaner or Rental machines are not supplied under the terms of

this warranty.

7. This warranty is to the original buyer of the overhaul and is not

transferable to subsequent owners of the machine in which the

component is installed.

Diamond Tools Limited Warranty

Diamond Products Limited warrants all of its diamond tools against defects in material and workmanship for a period of one (1) year from the date of shipment to Customer. All laser welded blades and bits are warranted against segment loss due to weld failure. Determination of the applicability of warranty will be made after the product is inspected by our Warranty Claims Department. The warranty does not cover any tool which Diamond Products determines to have been used in an improper application, subjected to negligent abuse, improperly mounted, altered, involved in a non-application accident or miscellaneously damaged. The responsibility of Diamond Products under this Warranty is limited to repair or replacement at Diamond Products’ option free of charge. In no event shall Diamond Products be liable for consequential or incidental damages. This warranty includes all labor, parts and shipping costs via UPS ground. Proof of purchase in the form of an invoice showing the date of shipment to be within one (1) year must accompany all warranty claims. Diamond Products reserves the right to prorate any warranty claim based upon a percentage of tool life prior to the failure in question. THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED, AND ALL SUCH OTHER WARRANTIES ARE HEREBY DISCLAIMED.

Abrasive Limited Warranty

Diamond Products Limited warrants all of its abrasive products against defects in material and workmanship for a period of one (1) year from the date of shipment to Customer. The warranty does not cover any products which Diamond Products determines to have been used in an improper application, subjected to negligent abuse, improperly mounted, altered, involved in a non-application accident or miscellaneously damaged. The responsibility of Diamond Products under this Warranty is limited to repair or replacement at Diamond Products’ option free of charge. In no event shall Diamond Products be liable for consequential or incidental damages. This warranty includes all labor, parts and shipping costs via UPS ground. Proof of purchase in the form of an invoice showing the date of shipment to be within one (1) year must accompany all warranty claims. Diamond Products reserves the right to prorate any warranty claim based upon a percentage of product life prior to the failure in question. THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED, AND ALL SUCH OTHER WARRANTIES ARE HEREBY DISCLAIMED.

Equipment Limited Warranty

Diamond Products warrants all products manufactured by it against defects in material and workmanship under normal use and service for a period of one (1) year from the date of shipment to Customer. The responsibility of Diamond Products under this Warranty is limited to replacement or repair of defective parts at Diamond Products’ Elyria, Ohio factory, or at a point designated by it, of such parts as shall appear to us upon inspection at such point, to have been defective in material or workmanship, with expense for transportation and labor born by Customer. In no event shall Diamond Products be liable for consequential or incidental damages arising out of the failure of any product to operate properly. Integral units such as gasoline engines, electric motors, batteries, tires, transmissions, etc., are excluded from this Warranty and are subject to prime manufacturer’s warranty. THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED, AND ALL SUCH OTHER WARRANTIES ARE HEREBY DISCLAIMED.

Highway Grooving Machinery Limited Warranty

Diamond Products LTD makes the following limited warranty: Diamond Products warrants each new and unused grooving or grinding machine and accessory equipment sold by it (except items not manufactured by Diamond Products such as engines, pumps, transmissions, and other trade accessories sold with, attached to, or operated with Diamond Products’ products), to be free from defects in material and workmanship under normal use and service for one (1) year from the date of shipment from the Diamond Products factory, the obligation under this warranty being limited to the replacement or repair at the Diamond Products factory, or at a point designated by it, of such parts as shall appear to it upon inspection at such point to have been defective in material or workmanship at the time sold, provided that the parts or parts claimed defective are returned to inspection points, transportation charges prepaid. If after inspection of the returned products, Diamond Products determines that the defect is a result of misuse, mishandling, installation, abnormal conditions of operation, unauthorized repair or modification, or due to the Buyer’s failure to install, maintain or operate the product in compliance with the written instructions, all expenses incurred by Diamond Products in connection with the replacement or repair of the product shall be for the account of the Buyer. Any product returned to Diamond Products for replacement shall become the property of Diamond Products. The Buyer shall be responsible for all costs of shipping, customs clearance and other related charges in connection with Diamond Products’ replacement or repair of products located outside the continental United States pursuant to the limited warranty. This warranty applies only to new and unused grooving or grinding machines and accessory equipment which after shipment from the Diamond Products factory have not been altered, changed or repaired in any manner. Maintenance items, such as filters, V-belts, air cleaners, wheels or Blade shaft bearings, are not covered under this warranty.

The validity, performance and interpretation of the limited warranty shall be governed by the internal laws (and not the laws of conflicts) of the State of California. All disputes arising in connection with the limited warranty shall be resolved, if not sooner settled, by a court of competent jurisdiction located in Stanislaus County, California, U.S.A. Exclusive Remedy: Replacement or repair of the Diamond Products’ products as provided under this warranty is the Buyer’s exclusive remedy. This exclusive remedy will not be deemed to have failed of its essential purpose so long as Diamond Products is willing and able to replace or repair any defective product in the prescribed manner. In the event Diamond Products fails to replace or repair the product as aforesaid, 2 - Diamond Products’ entire liability shall not exceed the amount paid by the Buyer to Diamond Products for its purchase of the defective product. Limitations on Warranty: In no event shall Diamond Products be liable for any indirect, special, incidental, consequential or other damages, including but not limited to damage to or loss of property or equipment, lost revenues or profits, or harm to goodwill or business reputation directly or indirectly arising from the sale, handling or use of the product, or from any other cause relating thereto and Diamond Products’ liability hereunder. Diamond Products shall not be liable to the Buyer for any claims, demand, injuries, damages, actions or causes of action what so ever based on negligence or strict liability. Exclusions of Warranties: Diamond Products, LTD makes no warranty that the products sold hereunder shall be merchantable or that such products shall be fit for any particular purpose. Moreover, Diamond Products makes no express or implied warranties except for the Limited Warranty outlined above. In addition, no representation or warranty, express or implied, made by any distributor, sales representative, or field agent of Diamond Products which is not specifically set forth herein shall be binding on Diamond Products

Magnum Power Products Warranty Coverage Overview (Exhibit A) Entire Product: 1 year/ unlimited hours 2 years/ 2000 hours

MMG & MTP Product Line * Exceptions: glow plugs, filters, fuses, bearings, brakes, fluids, tires, belts, bulbs ** Engine / Generator OEM Warranty ** John Deere: 1 year: unlimited hours 2 year: 2000 hours Isuzu: 1 year: unlimited hours 2 year: 2000 hours – Electrical 3 year: 3000 hours 5 year: 5000 hours: cylinder block, head, crankshaft, gears, connecting rods flywheel, oil pan, intake / exhaust manifold Cummins 1 year: unlimited hours (from OEM) the second year is covered by Magnum up to 2000hrs Kubota: 2 year: 2000 hours Marathon Electric: Generator OEM *** Warranty provided by engine manufacturer ***

MLT, MTT, MLC & MLG Product Line

* Exceptions: glow plugs, filters, fuses, bearings, brakes, fluids, tires, belts, bulbs, generator capacitors, MTT tank pump ** Engine / Generator OEM Warranty ** Mitsubishi: 2 year: 2000 hours 3 year: 3000 hours: crankcase, crank shaft, connecting rods, head, camshaft, gears,

flywheel, fly wheel housing, oil pan, intake/ exhaust manifold Kubota: 2 year: 2000 hours Isuzu: 1 year: unlimited hours 2 year: 2000 hours – Electrical 3 year: 3000 hours 5 year: 5000 hours: cylinder block, head, crankshaft, camshaft, gears, connecting rods,

flywheel, flywheel housing, oil pan, intake / exhaust manifold Marathon Electric: Generator OEM *** Warranty provided by engine manufacturer ***

Consult Magnum Power Products LLC to determine eligibility of battery coverage.

Magnum Power Products LLC Warranty Coverage Overview (Exhibit A)

Entire Product: 1 year: Unlimited Hours

MWT Product Line

* Exceptions: spark plugs, engine recoil, trailer lights, filters, fuses, hoses, seals, tires, brakes, bearings, fluids, belts

** Engine OEM Warranty ** Honda: 3 years *** Warranty provided by engine manufacturer ***

MPL Product Line

* Exceptions: light bulbs

*** Warranty provided by engine manufacturer ***

CH&E a Division of Magnum Power Products LLC Warranty Coverage Overview (Exhibit A)

Product: Six (6) Months

* Exceptions: spark plugs, engine recoil, trailer lights, filters, fuses, hoses, seals, tires, brakes, bearings, fluids, belts

*Engine: Warranty provided by engine manufacturer.

LIMITED PRODUCT WARRANTY Subject to the terms and conditions below, Magnum Power Products, LLC (“Magnum”) warrants that products manufactured by it (other than components subject to an OEM Warranty) (collectively, the “Products”), when used as intended and designed, shall be free from defects in material and/or workmanship for the applicable Warranty Period. Warranty coverage under the Warranty begins on the date of first operation of a Product, or six (6) months after the Product ship date from Magnum and shall continue for the time period(s) set forth in Exhibit A (the “Warranty Period”). Warranty claims must be submitted promptly to Magnum in writing, and actually received within the applicable Warranty Period, describing in detail: (i) the applicable Warranty, (ii) the claimed Product deficiency, defect or failure, (iii) Product information required by Magnum, and (iv)sales or purchaser order for any replacement parts (sent to Magnum’s Parts Sales Department). Magnum will reimburse necessary labor to repair the Products for a reasonable allotment of time to diagnose and replace defective Products as set forth in Exhibit A. Purchaser’s exclusive remedies under this Warranty shall be, at Magnum’s sole discretion: (i) repair; or (ii) replacement; or (iii) payment of or credit for the original purchase price of the Products. These remedies are expressly limited to the repair or replacement of the defective Products (or part(s) thereof), and do not include the replacement of the entire Product. The Warranty does not cover sales tax or any incidental costs, including without limitation: shipping or associated transportation charges, travel to and from repair sites, damages related to the loss of use, lost rentals, re-rental expenses and damages to property or other equipment. It is the responsibility of the purchaser to carry genuine replacement parts and provide Warranty service for the Products. Magnum will not ship replacement parts to purchasers, or end users, free of charge. Magnum will ship the replacement parts and issue an invoice to purchaser for shipping costs. The Warranty shall not apply to the extent Product defect has been caused by any of the following: (i) Product operator negligence or intentional misconduct (other than by Magnum), (ii) casualty or accident to the Products; (iii) use and operation of the Products) not in conformance with Magnum’ s training and/or operation manuals, or operation exceeding Magnum’s ratings for the Products, including misuse and abuse; (iv) maintenance, service and/or repair of the Products not in conformance with Magnum’s recommended service and maintenance schedules; (v) improper installation (other than by Magnum) not in material conformance with Magnum’s specifications; (vi) unauthorized modification of or alternations to the Products; (vii) improper load sizing (other than by Magnum); (vii) transportation damage; or (ix) Product exposure to the elements or other acts of God. Engines and driven components used in all Magnum Power Products carry a separate manufacturer’s (OEM) warranty (the “OEM Warranties”), unless otherwise expressly stated. OEM Warranties are in addition to this Warranty. All warranty claims for defects in material and/or workmanship on Magnum’s Products’ components, must be directed through the OEM distributor/dealer network. OEM Warranties may vary and are subject to change. Magnum shall have no liability under OEM warranties. Please contact your local Magnum sales representative for a list of these providers. The express warranties provided herein are offered in lieu of all other warranties, and to the greatest extent permitted by applicable law, Magnum’s repair and/or replacement of the Products, shall be purchaser’s sole and exclusive remedies and Magnum shall have no additional obligations. MAGNUM MAKES NO WARRANTY, REPRESENTATION OR GUARANTEE TO PURCHASER OR ANY THIRD PARTY EXCEPT AS EXPRESSLY PROVIDED IN AND BY THIS WARRANTY. MAGNUM HEREBY EXPRESSLY DISCLAIMS ANY WARRANTY OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE (OR OTHER WARRANTIES, REPRESENTATIONS OR GUARANTEES ARISING BY OPERATION OF LAW, COURSE OF DEALING OR CUSTOM OF TRADE). MAGNUM SHALL NOT BECOME LIABLE UNDER ANY CIRCUMSTANCES WHATSOEVER (WHETHER BY VIRTUE OF A PURCHASE AGREEMENT, THIS WARRANTY, ANCILLARY AGREEMENTS ENTERED INTO IN CONJUNCTION WITH THE FOREGOING OR ANY OTHER DOCUMENTS) FOR SPECIAL, EXEMPLARY, CONSEQUENTIAL, INCIDENTAL, PUNITIVE OR SPECULATIVE DAMAGES, INCLUDING WITHOUT LIMITATION PURCHASER’S OR ANY THIRD PARTIES’ LOST PROFITS WHICH MAY RESULT FROM, BE CAUSED BY OR ARISE OUT OF: (I) BREACH OF ANY WARRANTY, REPRESENTATION OR GUARANTEE MADE BY MAGNUM; (II) THE USE, OR COST OF USE, OF THE PRODUCTS; OR (III) MAGNUM’S PERFORMANCE OF ANY REMEDIAL WORK REQUIRED BY THIS WARRANTY. Some states in the U.S.A. do not allow limitations of how long an implied warranty extends, or the exclusion of incidental, indirect, special or consequential damages, so that the above limitation or exclusion may not apply to you. In some Canadian provinces legislation provides for certain additional warranties or remedies other than as stated herein, and to the extent that they may not be waived, the limitations and exclusions set out above may not apply. This Warranty provides specific legal rights; other rights may be available, but may vary from state to state or from province to province. b132608_2 10/2011

Effective January 1, 2016(Equipment with a serial number preface of MG or newer)This limited warranty supersedes all previous Miller warranties and is exclusive with no other

guarantees or warranties expressed or implied.LIMITED WARRANTY − Subject to the terms and conditions below,Miller Electric Mfg. Co., Appleton, Wisconsin, warrants to its originalretail purchaser that new Miller equipment sold after the effectivedate of this limited warranty is free of defects in material andworkmanship at the time it is shipped by Miller. THIS WARRANTY ISEXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESSOR IMPLIED, INCLUDING THE WARRANTIES OFMERCHANTABILITY AND FITNESS.

Within the warranty periods listed below, Miller will repair or replaceany warranted parts or components that fail due to such defects inmaterial or workmanship. Miller must be notified in writing withinthirty (30) days of such defect or failure, at which time Miller willprovide instructions on the warranty claim procedures to befollowed. If notification is submitted as an online warranty claim, theclaim must include a detailed description of the fault and thetroubleshooting steps taken to identify failed components and thecause of their failure.

Miller shall honor warranty claims on warranted equipment listedbelow in the event of such a failure within the warranty time periods.All warranty time periods start on the delivery date of the equipmentto the original end-user purchaser, and not to exceed twelve monthsafter the equipment is shipped to a North American distributor oreighteen months after the equipment is shipped to an Internationaldistributor.

1. 5 Years Parts — 3 Years Labor* Original Main Power Rectifiers Only to Include SCRs,

Diodes, and Discrete Rectifier Modules2. 3 Years — Parts and Labor

* Auto-Darkening Helmet Lenses (Except ClassicSeries) (No Labor)

* Engine Driven Welder/Generators(NOTE: Engines are Warranted Separately by theEngine Manufacturer.)

* Inverter Power Sources (Unless Otherwise Stated)* Plasma Arc Cutting Power Sources* Process Controllers* Semi-Automatic and Automatic Wire Feeders* Transformer/Rectifier Power Sources

3. 2 Years — Parts and Labor* Auto-Darkening Helmet Lenses − Classic Series Only

(No Labor)* Fume Extractors − Capture 5, Filtair 400 and Industrial

Collector Series4. 1 Year — Parts and Labor Unless Specified

* Automatic Motion Devices* CoolBelt and CoolBand Blower Unit (No Labor)* Desiccant Air Dryer System* External Monitoring Equipment and Sensors* Field Options

(NOTE: Field options are covered for the remainingwarranty period of the product they are installed in,or for a minimum of one year — whichever isgreater.)

* RFCS Foot Controls (Except RFCS-RJ45)* Fume Extractors − Filtair 130, MWX and SWX Series* HF Units* ICE/XT Plasma Cutting Torches (No Labor)* Induction Heating Power Sources, Coolers

(NOTE: Digital Recorders are Warranted Separatelyby the Manufacturer.)

* LiveArc Welding Performance Management System* Load Banks* Motor-Driven Guns (except Spoolmate Spoolguns)* PAPR Blower Unit (No Labor)* Positioners and Controllers* Racks* Running Gear/Trailers* Spot Welders* Subarc Wire Drive Assemblies* Water Coolant Systems* TIG Torches (No Labor)* Wireless Remote Foot/Hand Controls and Receivers* Work Stations/Weld Tables (No Labor)

5. 6 Months — Parts* Batteries* Bernard Guns (No Labor)* Tregaskiss Guns (No Labor)

6. 90 Days — Parts* Accessory (Kits)* Canvas Covers* Induction Heating Coils and Blankets, Cables, and

Non-Electronic Controls* M-Guns* MIG Guns and Subarc (SAW) Torches* Remote Controls and RFCS-RJ45* Replacement Parts (No labor)* Roughneck Guns* Spoolmate Spoolguns

Miller’s True Blue® Limited Warranty shall not apply to:1. Consumable components; such as contact tips,

cutting nozzles, contactors, brushes, relays, workstation table tops and welding curtains, or parts thatfail due to normal wear. (Exception: brushes andrelays are covered on all engine-driven products.)

2. Items furnished by Miller, but manufactured by others,such as engines or trade accessories. These items arecovered by the manufacturer’s warranty, if any.

3. Equipment that has been modified by any party other thanMiller, or equipment that has been improperly installed,improperly operated or misused based upon industrystandards, or equipment which has not had reasonableand necessary maintenance, or equipment which hasbeen used for operation outside of the specifications forthe equipment.

MILLER PRODUCTS ARE INTENDED FOR PURCHASE ANDUSE BY COMMERCIAL/INDUSTRIAL USERS AND PERSONSTRAINED AND EXPERIENCED IN THE USE ANDMAINTENANCE OF WELDING EQUIPMENT.In the event of a warranty claim covered by this warranty, theexclusive remedies shall be, at Miller’s option: (1) repair; or (2)replacement; or, where authorized in writing by Miller in appropriatecases, (3) the reasonable cost of repair or replacement at anauthorized Miller service station; or (4) payment of or credit for thepurchase price (less reasonable depreciation based upon actualuse) upon return of the goods at customer’s risk and expense.Miller’s option of repair or replacement will be F.O.B., Factory atAppleton, Wisconsin, or F.O.B. at a Miller authorized service facilityas determined by Miller. Therefore no compensation orreimbursement for transportation costs of any kind will be allowed.TO THE EXTENT PERMITTED BY LAW, THE REMEDIESPROVIDED HEREIN ARE THE SOLE AND EXCLUSIVEREMEDIES. IN NO EVENT SHALL MILLER BE LIABLE FORDIRECT, INDIRECT, SPECIAL, INCIDENTAL ORCONSEQUENTIAL DAMAGES (INCLUDING LOSS OF PROFIT),WHETHER BASED ON CONTRACT, TORT OR ANY OTHERLEGAL THEORY.ANY EXPRESS WARRANTY NOT PROVIDED HEREIN AND ANYIMPLIED WARRANTY, GUARANTY OR REPRESENTATION ASTO PERFORMANCE, AND ANY REMEDY FOR BREACH OFCONTRACT TORT OR ANY OTHER LEGAL THEORY WHICH,BUT FOR THIS PROVISION, MIGHT ARISE BY IMPLICATION,OPERATION OF LAW, CUSTOM OF TRADE OR COURSE OFDEALING, INCLUDING ANY IMPLIED WARRANTY OFMERCHANTABILITY OR FITNESS FOR PARTICULARPURPOSE, WITH RESPECT TO ANY AND ALL EQUIPMENTFURNISHED BY MILLER IS EXCLUDED AND DISCLAIMED BYMILLER.Some states in the U.S.A. do not allow limitations of how long animplied warranty lasts, or the exclusion of incidental, indirect,special or consequential damages, so the above limitation orexclusion may not apply to you. This warranty provides specificlegal rights, and other rights may be available, but may vary fromstate to state.In Canada, legislation in some provinces provides for certainadditional warranties or remedies other than as stated herein, and tothe extent that they may not be waived, the limitations andexclusions set out above may not apply. This Limited Warrantyprovides specific legal rights, and other rights may be available, butmay vary from province to province.

Warranty Questions?

Call1-800-4-A-MILLERfor your localMiller distributor.

miller_warr 2016-01

Your distributor also givesyou ...

ServiceYou always get the fast,reliable response youneed. Most replacementparts can be in yourhands in 24 hours.

SupportNeed fast answers to thetough welding questions?Contact your distributor.The expertise of thedistributor and Miller isthere to help you, everystep of the way.

Documents

STANDARD WARRANTY - michigan.gov · a different Caterpillar Warranty. ... MACHINE LOCATION ARE THE SOLE RESPONSIBILITY OF THE BUYER. ANALYSIS PROGRAM: The oil sampling schedule listed