Embed Size (px)
Citation preview
OSHA
Page 1
CFR Doc . CFR Referenced StandarOriginating SDO29 CFR Appendix A To 1910.1200--HealthZ129.1-1988, PrecautionACC
ACI 318-83 ACI29 CFR 1910.94 Ventilation. Z9.2-1960 AIHA (ASC Z9)29 CFR Appendix B To 1910.1450--ReferZ 9.2-1979 AIHA (ASC Z9)29 CFR 1926.57 Ventilation. Z9.2-1960 AIHA (ASC Z9)29 CFR 1910.124 General Requirements Z9.2-1979, FundamentalAIHA (ASC Z9)29 CFR 1910.124 General Requirements Z9.1-1971, Practices for AIHA (ASC Z9)29 CFR 1910.6 - Incorporation By Refer Z9.2-79 Fundamentals GAIHA (ASC Z9)29 CFR 1910.6 - Incorporation By Refer Z9.2-60 Fundamentals GAIHA (ASC Z9)29 CFR 1910.1001 Asbestos. Z9.2-1979, FundamentalAIHA (ASC Z9)29 CFR 1910.6 - Incorporation By Refer Z9.1-71 Practices for Ve AIHA (ASC Z9)29 CFR 1910.6 - Incorporation By Refer Z9.1-51 Safety Code for AIHA (ASC Z9)29 CFR Appendix A to subpart X--LadderA14.4-1979, Safety RequALI (ASC A14)29 CFR Appendix A to subpart X--LadderA14.3-1984, American NaALI (ASC A14)29 CFR Appendix A to subpart X--LadderA14.2-1982, American NaALI (ASC A14)29 CFR 1917.3 Incorporation By ReferenA14.1-1990, Safety RequALI (ASC A14)29 CFR Appendix A to subpart X--LadderA14.5-1982, American NaALI (ASC A14)29 CFR 1918.3 Incorporation by referencA14.1-1990, Safety RequALI (ASC A14)29 CFR 1910.179 Overhead and gantry cA14.3-1956 ALI (ASC A14)29 CFR 1918.3 Incorporation by referencA14.5-1992, Safety RequALI (ASC A14)29 CFR 1918.3 Incorporation by referencA14.2-1990, Safety RequALI (ASC A14)29 CFR Appendix A to subpart X--LadderA14.1-1982, American NaALI (ASC A14)29 CFR 1918.24 Fixed And Portable LaddA14.5-1992, Safety RequALI (ASC A14)29 CFR 1918.24 Fixed And Portable LaddA14.1-1990, Safety RequALI (ASC A14)29 CFR 1917.3 Incorporation By ReferenA14.2-1990, Safety RequALI (ASC A14)29 CFR 1918.24 Fixed And Portable LaddA14.2-1990, Safety RequALI (ASC A14)29 CFR 1917.119 Portable Ladders. A14.5-1992, Safety RequALI (ASC A14)29 CFR 1917.119 Portable Ladders. A14.2-1990, Safety RequALI (ASC A14)29 CFR 1917.119 Portable Ladders. A14.1-1990, Safety RequALI (ASC A14)29 CFR 1915.5 Incorporation by referencA14.2-1956 Safety Code ALI (ASC A14)29 CFR 1915.5 Incorporation by referencA14.1-1959 Safety CodeALI (ASC A14)29 CFR 1910.68 Manlifts. A14.3-1956 Safety Code ALI (ASC A14)29 CFR 1910.68 Manlifts. A 14.3-1956 ALI (ASC A14)29 CFR 1910.6 - Incorporation By Refer A14.1-68 Safety Code foALI (ASC A14)29 CFR 1910.6 - Incorporation By Refer A14.2-56 Safety Code foALI (ASC A14)29 CFR 1910.6 - Incorporation By Refer A14.3-56 Safety Code foALI (ASC A14)29 CFR 1917.3 Incorporation By ReferenA14.5-1992, Safety RequALI (ASC A14)29 CFR Appendix D to §1926.64--SourcesAPI Recommended PractAPI29 CFR 1910.6 Incorporation By ReferenAPI 620 API29 CFR 1910.103 Hydrogen. API Standard 620 API29 CFR 1910.6 Incorporation By ReferenAPI 620 API29 CFR 1910.6 Incorporation By ReferenAPI 2201 API29 CFR 1910.6 Incorporation By ReferenAPI 2201 (1963) API29 CFR 1910.111 Storage And Handling API Standard 620 API29 CFR 1910.6 Incorporation By ReferenAPI 2000 API29 CFR 1910.6 Incorporation By ReferenAPI 650 API29 CFR 1910.6 Incorporation By ReferenAPI 1104 API29 CFR 1910.111 Storage And Handling API Standard 620 API29 CFR 1910.6 Incorporation By ReferenAPI 1104 API
Q OF PART 1926
OSHA
Page 2
29 CFR Appendix D to §1926.64--SourcesAPI Recommended PractAPI29 CFR 1910.252 General RequirementsAPI Std. PSD No. 2201-- API29 CFR 1910.252 General RequirementsAPI Std. PSD No. 2201-- API
API Recommended PractAPI29 CFR 1910.252 General RequirementsAPI Std. 1104--1968 API
API Recommended PractAPIAPI Recommended PractAPI
29 CFR 1910.6 Incorporation By ReferenAPI 2000 API29 CFR 1910.6 Incorporation By ReferenAPI 650 API29 CFR Appendix I To 1910.95--Definitio S1.4-1971 (R1976) ASA (ASC S1)29 CFR 1910.6 - Incorporation By Refer S1.11-71 (R 76) SpecificASA (ASC S1)29 CFR 1910.6 - Incorporation By Refer S1.4-71 (R 76) Specifica ASA (ASC S1)29 CFR 1910.6 - Incorporation By Refer S3.6-69 Specifications f ASA (ASC S3)
ASAE S383 ASAE29 CFR 1910.68 Manlifts. B15.1-1953 (R 1958) ASME29 CFR 1926.152 - Flammable And CombuASME Boiler and PressurASME29 CFR 1910.253 Oxygen-Fuel Gas WeldiB31.1--1967 ASME29 CFR 1910.253 Oxygen-Fuel Gas WeldiA13.1--1956 ASME29 CFR 1910.261 - Pulp, paper, and papeASME Boiler and PressurASME29 CFR 1910.103 Hydrogen. B31.1-1967 ASME29 CFR Appendix D To 1910.66--Existing A120.1-1970 ASME29 CFR 1910.6 - Incorporation By Refer A90.1-69 Safety StandardASME29 CFR 1910.103 Hydrogen. B31.5-1966 ASME29 CFR 1910.103 Hydrogen. B31.3-1966 ASME29 CFR 1910.103 Hydrogen. B31.1-1969 ASME29 CFR 1910.262 - Textiles ASME Code for Pressure VASME29 CFR 1910.180 Crawler locomotive andB30.5-1968 ASME29 CFR 1910.6 - Incorporation By Refer B30.2-43 (R 52) Safety CASME29 CFR 1910.6 - Incorporation By Refer B30.2.0-67 Safety Code ASME29 CFR 1910.179 Overhead and gantry cB30.9-1971, Safety CodeASME29 CFR 1910.6 - Incorporation By Refer A17.2-60 Practice for th ASME29 CFR 1910.179 Overhead and gantry cB30.2.0-1967 ASME29 CFR 1910.68 Manlifts. A90.1-1969 ASME29 CFR 1926.555 Conveyors. B20.1-1957, Safety Cod ASME29 CFR 1910.6 - Incorporation By Refer B20.1-57 Safety Code f ASME29 CFR 1926.550 Cranes and derricks. B30.2.0-1967, Safety C ASME29 CFR 1926.550 Cranes and derricks. B30.5-1968, Safety CodeASME29 CFR 1910.181 Derricks. B30.6-1969 ASME29 CFR 1910.218 Forging machines. B31.1.0-1967, Power PipASME29 CFR 1910.218 Forging machines. B20.1-1957, Safety Cod ASME29 CFR 1910.6 - Incorporation By Refer B15.1-53 (R 58) Safety ASME29 CFR 1910.6 - Incorporation By Refer A17.1-65 Safety Code foASME29 CFR 1910.6 - Incorporation By Refer ASME Boiler and PressurASME29 CFR 1910.269 Appendix E to Section ASME B20.1-1990, SafetASME29 CFR 1910S Appendix A to Subpart S A17.1-71, Safety Code f ASME29 CFR 1910S Appendix A to Subpart S B30.2-76 Safety Code f ASME29 CFR 1910S Appendix A to Subpart S B30.3-75 Hammerhead TASME29 CFR 1910S Appendix A to Subpart S B30.4-73 Safety Code forASME29 CFR 1910S Appendix A to Subpart S B30.5-68 Safety Code foASME29 CFR 1910S Appendix A to Subpart S B30.6-77 Derricks ASME
(Nonmandatory)
(Nonmandatory)(Nonmandatory)
Tractors Used In Agricultural Operations.
OSHA
Page 3
29 CFR 1910S Appendix A to Subpart S B30.7-77 Base Mounted ASME29 CFR 1910.6 - Incorporation By Refer ASME Code for Pressure ASME29 CFR 1910S Appendix A to Subpart S B30.8-71 Safety Code forASME29 CFR 1910S Appendix A to Subpart S B30.11-73 Monorail Sys ASME29 CFR 1910S Appendix A to Subpart S B30.12-75 Handling Loa ASME29 CFR 1910.103 Hydrogen. B31.1-1967 ASME29 CFR 1910S Appendix A to Subpart S B30.16-73 Overhead HoiASME29 CFR Appendix E To 1910.269--Refer B20.1-1990, Safety Sta ASME29 CFR 1915.5 - Incorporation by refere ASME Boiler and PressureASME29 CFR 1910.6 - Incorporation By Refer ASME Boiler and PressureASME29 CFR 1917.3 - Incorporation By Refer ASME B56.1, 1959, SafetASME29 CFR 1910.263 - Bakery equipment ASME Pressure Vessel CoASME29 CFR 1910.6 - Incorporation By Refer ASME Boiler and PressurASME29 CFR 1910.178 Powered Industrial TruB56.1-1969 ASME29 CFR 1910.268 Telecommunications. B30.6-1969, Safety CodeASME29 CFR 1910.6 - Incorporation By Refer ASME Boiler and PressureASME29 CFR 1917.42 Miscellaneous Auxiliary B30.9-1971 ASME29 CFR 1917.50 - Certification Of Marin ASME B56.1, 1959, "SafeASME29 CFR 1910.266 - Logging operations ASME B56.6-1992 (with aASME29 CFR 1910.402 - Definitions ASME Boiler and PressureASME29 CFR 1910.6 - Incorporation By Refer B56.1-69 Safety StandarASME29 CFR 1910S Appendix A to Subpart S B30.13-77 Controlled MeASME29 CFR 1910.6 Incorporation By ReferenA120.1-70 Safety Code fASME29 CFR 1910.6 - Incorporation By Refer B31.3-66 Petroleum RefiASME29 CFR 1910.6 - Incorporation By Refer B31.1-55 Code for PressASME29 CFR 1910.110 - Storage and handling ASME section VIII, Divisi ASME29 CFR 1910.6 - Incorporation By Refer B31.1a-63 ASME29 CFR 1910.107 - Spray finishing usin ASME Boiler and PressurASME29 CFR 1910.6 Incorporation By ReferenA13.1-56 Scheme for the ASME29 CFR 1910.103 - Hydrogen ASME Boiler and PressureASME29 CFR 1910.103 Hydrogen. B31.5a-1968 ASME29 CFR 1910.6 - Incorporation By Refer B30.5-68 Safety Code foASME29 CFR 1910.106 - Flammable and combusASME Boiler and PressurASME29 CFR 1910.104 Oxygen. B31.1-1967 ASME29 CFR 1910.104 - Oxygen ASME Boiler and PressureASME29 CFR 1910.6 - Incorporation By Refer B30.6-69 Safety Code foASME29 CFR 1910.110 - Storage and handling ASME Boiler and PressurASME29 CFR 1910.6 - Incorporation By Refer B31.5-66 Addenda B31.5aASME29 CFR 1910.6 - Incorporation By Refer ASME B56.6-1992 (with ASME29 CFR 1910.6 - Incorporation By Refer B31.1-67 ASME29 CFR 1910.6 - Incorporation By Refer B31.1-67 ASME29 CFR 1915.5 Incorporation by referenc87.1-1979 Practice for ASSE29 CFR 1910.6 Incorporation By ReferenA12.1-67 Safety RequireASSE (ASC A1264)29 CFR 1910.6 Incorporation By ReferenZ87.1-89, Practice for O ASSE (ASC Z87)29 CFR 1917.3 Incorporation By ReferenZ-87.1-1989, Practice f ASSE (ASC Z87)29 CFR 1910.133 Eye and face protectioZ87.1-1989, Practice fo ASSE (ASC Z87)29 CFR 1910.6 Incorporation By ReferenZ87.1-68 Practice of Oc ASSE (ASC Z87)29 CFR 1917.91 Eye and face protectionZ-87.1-1989, Practice f ASSE (ASC Z87)29 CFR 1918.3 Incorporation by referencZ-87.1-1989, Practice f ASSE (ASC Z87)29 CFR 1910.252 General RequirementsZ87.1--1968, Practice f ASSE (ASC Z87)
OSHA
Page 4
29 CFR 1918.101 Eye and face protectioZ-87.1-1989, Practice f ASSE (ASC Z87)29 CFR 1915.5 Incorporation by referencZ87.1-1989 Practice for ASSE (ASC Z87)29 CFR 1915.153 Eye and face protectioZ87.1-1989, Practice fo ASSE (ASC Z87)29 CFR 1910L APPENDIX C TO SUBPART Z87.1 ASSE (ASC Z87)29 CFR 1910.269 Appendix E to Section F 1117-87, SpecificationASTM29 CFR 1910.269 Appendix E to Section F 1116-88, Test Method ASTM29 CFR 1910.269 Appendix E to Section F 1236-89, Guide for VisASTM29 CFR 1910.269 Appendix E to Section F 1505-94, Standard SpecASTM29 CFR 1910.269 Appendix E to Section D 178-93, Specification ASTM29 CFR 1910.269 Appendix E to Section D 149-92, Test Method foASTM29 CFR 1910.269 Appendix E to Section D 1051-87, SpecificationASTM29 CFR 1910.269 Appendix E to Section F 712-88, Test Methods fASTM29 CFR 1910.269 Appendix E to Section D 1050-90, SpecificationASTM29 CFR 1910.269 Appendix E to Section D 1049-93, SpecificationASTM29 CFR 1910.269 Appendix E to Section D 1048-93, SpecificationASTM29 CFR 1910.106 - Flammable And CombuD 323-68, Standard MethASTM29 CFR 1910.110 - Storage And HandlingA 53-69, Grade B Electr ASTM29 CFR 1910.110 - Storage And HandlingB 210-68 ASTM29 CFR 1910.110 - Storage And HandlingB 241-69 ASTM29 CFR 1910.110 - Storage And HandlingB 88-69, Specification ASTM29 CFR 1910.106 - Flammable And CombuD 2161-66 ASTM29 CFR 1910.103 - Hydrogen D 1692-68 ASTM29 CFR 1910.269 Appendix E to Section D 120-87, Specification ASTM29 CFR 1910.6 - Incorporation By Refer D 5-65 Test for PenetratASTM29 CFR 1910.269 Appendix E to Section F 496-93b, SpecificationASTM29 CFR 1910.6 - Incorporation By Refer B 241-69, IBR approved fASTM29 CFR 1910.6 - Incorporation By Refer B 88-66A Seamless CoppeASTM29 CFR 1910.6 - Incorporation By Refer B 88-69 Seamless Copper ASTM29 CFR Appendix B To Subpart R - AcceptF 1679-96, Standard TestASTM29 CFR 1910.6 - Incorporation By Refer D 2161-66 Conversion TaASTM29 CFR 1910.6 - Incorporation By Refer B 117-64 Salt Spray (FogASTM29 CFR 1910.6 - Incorporation By Refer D 445-65 Test for Visco ASTM29 CFR 1910.6 - Incorporation By Refer A 53-69 Welded and SeamlASTM29 CFR 1910.6 - Incorporation By Refer D 56-70 Test for Flash P ASTM29 CFR 1910.6 - Incorporation By Refer D 86-62 Test for Distill ASTM29 CFR 1910.6 - Incorporation By Refer D 88-56 Test for SayboltASTM29 CFR 1910.6 - Incorporation By Refer D 93-71 Test for Flash P ASTM29 CFR 1910.106 - Flammable And CombuD 88-56, Standard MethodASTM29 CFR 1910.106 - Flammable And CombuD 86-62, Standard MethodASTM29 CFR 1910.106 - Flammable And CombuD 56-70, Standard MethoASTM29 CFR 1910.6 - Incorporation By Refer D 323-68, IBR approved ASTM29 CFR 1910.269 Appendix E to Section F 968-93, Specification fASTM29 CFR 1910L APPENDIX B TO SUBPART E 380, American NationalASTM29 CFR 1910.269 Appendix E to Section F 478-92, Specification ASTM29 CFR 1910.269 Appendix E to Section F 479-93, Specification fASTM29 CFR 1910.269 Appendix E to Section F 711-89, Specification ASTM29 CFR 1910.269 Appendix E to Section F 819-83a (1988), DefiniASTM29 CFR 1910.269 Appendix E to Section F 855-90, Specification ASTM29 CFR 1910.6 - Incorporation By Refer B 210-68 Aluminum-AlloyASTM29 CFR 1910.269 Appendix E to Section F 914-91, Test Method foASTM
OSHA
Page 5
29 CFR 1910.269 Appendix E to Section F 1506-94, Standard PerASTM29 CFR Appendix B To Subpart R - AcceptF 1677-96, Standard TestASTM29 CFR 1910.106 - Flammable And CombuD 93-71, Standard MethoASTM29 CFR 1910.6 - Incorporation By Refer D 1692-68 Test for FlammASTM29 CFR 1910.6 - Incorporation By Refer A 126-66 Gray Iron CastiASTM29 CFR 1910.6 - Incorporation By Refer A 391-65 (ANSI G61.1-19ASTM29 CFR 1910.6 - Incorporation By Refer A 395-68 Ductile Iron fo ASTM29 CFR 1910.6 - Incorporation By Refer A 47-68 Malleable Iron CASTM29 CFR 1910.269 Appendix E to Section F 887-91a, Specificatio ASTM29 CFR 1910.137 - Electrical protective D 1050-90, SpecificationASTM29 CFR 1910.137 - Electrical protective D 1051-87, SpecificationASTM29 CFR 1926Q Appendix A to Subpart Q--C 918-80, Standard MethASTM29 CFR 1910.1200 - Hazard CommunicatD 323-72 ASTM29 CFR 1910.1200 - Hazard CommunicatD 3278-78, Standard MethASTM29 CFR 1910.1200 - Hazard CommunicatD 56-79, Standard MethodASTM29 CFR 1910.1200 - Hazard CommunicatD 93-79, Standard MethoASTM29 CFR 1926Q Appendix A to Subpart Q--E 329-77, Recommended PASTM29 CFR 1910.1450 - Occupational ExposuD 3278-78, Standard MethASTM29 CFR 1910.137 - Electrical protective D 1048-93 (or D 1048-88aASTM29 CFR 1910.137 - Electrical protective D 1049-88 ASTM29 CFR 1910.111 - Storage And Handlin A47-68 ASTM29 CFR 1910.137 - Electrical protective F 496-93b, SpecificationASTM29 CFR 1926Q Appendix A to Subpart Q--C 873-85, Standard Test ASTM29 CFR 1910S Appendix A to Subpart S D 2155-66 Test Method fASTM29 CFR 1926.155 - Definitions applicableD 93-69, Standard MethoASTM29 CFR 1910.137 - Electrical protective D 120-87, Specification ASTM29 CFR 1910.137 - Electrical protective D 120-87, Specification ASTM29 CFR 1910.137 - Electrical protective D 178-93 (or D 178-88), ASTM29 CFR 1910.253 - Oxygen-Fuel Gas WelB 88-66a, Standard SpecASTM29 CFR 1910.137 - Electrical protective F 478-92, Specification ASTM29 CFR 1910.137 - Electrical protective F 479-93, Specification fASTM29 CFR 1926.155 - Definitions applicableD 323-58, Standard MethASTM29 CFR 1926.155 - Definitions applicableD 56-69, Standard MethodASTM29 CFR 1910.137 - Electrical protective D 1049-93 (or D 1049-88)ASTM29 CFR 1910.111 - Storage And Handlin A 53-69, Grade B Electr ASTM29 CFR 1926P Appendix A To Subpart P D 653-85 ASTM29 CFR 1910S Appendix A to Subpart S D 3176-74 Method for UlASTM29 CFR 1910S Appendix A to Subpart S D 3180-74 Method for CaASTM29 CFR 1926P Appendix A To Subpart P D 2488, Standard RecommASTM29 CFR 1910.1450 - Occupational ExposuD 56-79, Standard MethodASTM29 CFR 1910.111 - Storage And Handlin 395-68 ASTM29 CFR 1926.64 - Process Safety Manag D 86-62, Standard MethodASTM29 CFR 1910.1450 - Occupational ExposuD 93-79, Standard MethoASTM29 CFR 1910.269 - Electric Power GeneraF 855-1990, Standard SpASTM29 CFR 1910.119 - Process Safety Mana D 86-62, Standard MethodASTM29 CFR 1910.269 - Electric Power GeneraF 711-89, Standard SpeciASTM29 CFR 1926Q Appendix A to Subpart Q--C 803-82, Standard TestASTM29 CFR 1910.111 - Storage And Handlin A126-66 ASTM29 CFR 1926Q Appendix A to Subpart Q--C 42-87, Methods of ObtASTM29 CFR 1910.106 - Flammable And CombuD 445-65, Standard MethASTM
OSHA
Page 6
29 CFR 1926Q Appendix A to Subpart Q--C 684-81, Method of MakASTM29 CFR 1926Q Appendix A to Subpart Q--C 116-68 (1980), Test MASTM29 CFR 1926Q Appendix A to Subpart Q--C 192-88, Method of MakASTM29 CFR 1926Q Appendix A to Subpart Q--C 31-85, Standard Test ASTM29 CFR 1926Q Appendix A to Subpart Q--C 39-86, Standard Test ASTM29 CFR 1910.1450 - Occupational ExposuD-323-72 ASTM29 CFR 1926Q Appendix A to Subpart Q--C 513-86, Methods of SeASTM29 CFR 1926Q Appendix A to Subpart Q--C 495-86, Test Method fASTM29 CFR 1910.6 Incorporation By ReferenAWS A3.0 (1969) AWS29 CFR 1910.6 Incorporation By ReferenZ49.1-67 Safety in WeldAWS (ASC Z49)29 CFR 1910.252 General RequirementsZ49.1-1967, Safety in WAWS (ASC Z49)29 CFR 1910.111 Storage And Handling Z48.1-1954 (R1970) CGA29 CFR 1910.103 Hydrogen. Z48.1--1954 CGA29 CFR 1910.253 Oxygen-Fuel Gas WeldiZ48.1--1954 CGA29 CFR 1910.6 - Incorporation By Refer B57.1-65 Compressed GasCGA29 CFR 1910.6 Incorporation By ReferenZ48.1-54 (R 70) Method CGA29 CFR 1910.6 - Incorporation By Refer K61.1-66 Safety Requir CGA (ASC K61)29 CFR 1910.6 - Incorporation By Refer K61.1-60 Safety Requir CGA (ASC K61)29 CFR 1910S Appendix A to Subpart S K61.1-72 Safety Requir CGA (ASC K61)29 CFR 1910.6 Incorporation By ReferenK61.1-1972 CGA (ASC K61)29 CFR 1910.269 Appendix E to Section IEEE Standard 978-1984IEEE29 CFR 1910S Appendix A to Subpart S IEEE Standard 463-77 IEEE29 CFR 1910.269 Appendix B To SectionIEEE Standard 516-1987IEEE29 CFR Appendix E To 1910.269--Refer 100-1988, IEEE Standard IEEE29 CFR Appendix E To 1910.269--Refer 978-1984 (R1991), IEEE GIEEE29 CFR 1910.269 - Electric Power GeneraIEEE Standard 978-1984IEEE29 CFR 1910.269 Appendix E to Section IEEE Standard 1048-199IEEE29 CFR Appendix E To 1910.269--Refer 935-1989, IEEE Guide onIEEE29 CFR 1910.269 Appendix E to Section IEEE Standard 1067-199IEEE29 CFR 1910.269 Appendix E to Section IEEE Standard 4-1978 IEEE29 CFR 1910.269 Appendix E to Section IEEE Standard 516-1987IEEE29 CFR 1910.269 Appendix E to Section IEEE Standard 524-1992IEEE29 CFR 1910.269 Appendix E to Section IEEE Standard 62-1978 IEEE29 CFR 1910.269 Appendix E to Section IEEE Standard 957-1987IEEE29 CFR Appendix B To 1910.269--Workin516-1987, IEEE Guide foIEEE29 CFR Appendix E To 1910.269--Refer 516-1987, IEEE Guide foIEEE29 CFR Appendix E To 1910.269--Refer 4-1978 (Fifth Printing), IEEE29 CFR Appendix E To 1910.269--Refer 957-1987, IEEE Guide forIEEE29 CFR Appendix B To 1910.269--Workin4 IEEE29 CFR 1910.269 Appendix E to Section IEEE Standard 935-1989IEEE29 CFR 1910.6 Incorporation By ReferenA11.1-65 (R 70) Practice IESNA29 CFR 1910.6 Incorporation By ReferenA11.1-65 Practice for IndIESNA29 CFR 1910.219 Mechanical power-tranA11.1-1965 (R-1970) IESNA29 CFR 1926.307 Mechanical power-tranA11.1-1965 (R-1970) IESNA29 CFR Appendix E To 1910.269--Refer Z133.1-1988, American NISA2 (ASC Z133)29 CFR 1910.6 Incorporation By ReferenZ89.1-69 Safety RequireISEA29 CFR 1910.6 Incorporation By ReferenZ89.1-86, Protective He ISEA29 CFR Appendix A To 1910.151--First A Z308.1-1978, Minimum ReqISEA29 CFR 1910.135 Head protection. Z89.1-1969, Safety RequISEA29 CFR 1915.5 Incorporation by referencZ89.1-1969 Safety RequiISEA
OSHA
Page 7
29 CFR 1910.135 Head protection. Z89.1-1986, Personnel PISEA29 CFR 1926.50 Appendix A To 1926.50 AZ308.1-1978, Minimum ReqISEA29 CFR 1918.3 Incorporation by referencZ-89.1-1986, Personnel ISEA29 CFR 1918.103 Head protection. Z-89.1-1986, Personnel ISEA29 CFR 1917.93 Head protection. Z-89.1-1986, Personnel ISEA29 CFR 1917.3 Incorporation By ReferenZ-89.1-1986, Personnel ISEA29 CFR 1915.155 Head protection. Z89.l-1986, Personnel P ISEA29 CFR 1910L APPENDIX C TO SUBPART Z89.1 ISEA29 CFR 1915.5 Incorporation by referencZ89.1-1986 Personnel PrISEA29 CFR Appendix C to §1915.1001--QualitZ88.2-1980 LLNL (ASC Z88)29 CFR 1910.6 Incorporation By ReferenZ88.2-69 Practices for RLLNL (ASC Z88)29 CFR 1910.6 Incorporation By ReferenZ53.1-67 Safety Color CoNEMA29 CFR 1910.6 Incorporation By ReferenNEMA EW-1 NEMA29 CFR 1910.254 Arc welding and cuttinNEMA EW-1-1962 NEMA29 CFR 1910.110 Storage And Handling NFPA 54A-1969 NFPA29 CFR 1910.110 Storage And Handling NFPA 54-1969 NFPA29 CFR 1910.110 Storage And Handling NFPA 37-1970 NFPA29 CFR 1910.109 Explosives And BlastinNFPA 203M-1970 NFPA29 CFR 1910.107 Spray finishing using NFPA No. 91-1961 NFPA29 CFR 1910.107 Spray finishing using NFPA 86A-1969 NFPA29 CFR 1910.106 Flammable And CombusNFPA No. 80-1968 NFPA29 CFR 1910.110 Storage And Handling NFPA No. 58 NFPA29 CFR 1910.106 Flammable And CombusNFPA No. 37-1970 NFPA29 CFR 1910.124 General Requirements NFPA 34-1966 NFPA29 CFR 1910.106 Flammable And CombusNFPA No. 36-1967 NFPA29 CFR 1910.106 Flammable And CombusNFPA No. 35-1970 NFPA29 CFR 1910.106 Flammable And CombusNFPA No. 32-1970 NFPA29 CFR 1910.106 Flammable And CombusNFPA 251-1969 NFPA29 CFR 1910.106 Flammable And CombusNFPA 385-1966 NFPA29 CFR 1910.103 Hydrogen NFPA No. 220 NFPA29 CFR 1910.265 Sawmills NFPA No. 302--1968 NFPA29 CFR 1910.6 Incorporation By ReferenNFPA 54-1969 NFPA29 CFR 1910.261 Pulp, Paper, And PaperNFPA 101--1970 NFPA29 CFR 1910.253 Oxygen-Fuel Gas WeldiNFPA 80--1970 NFPA29 CFR 1910.252 General RequirementsNFPA Standard 51B NFPA29 CFR 1910.307 Hazardous (classified) NFPA 70 NFPA29 CFR 1910.110 Storage And Handling NFPA 96-1970 NFPA29 CFR 1910.178 Powered Industrial TruNFPA No. 30-1969 NFPA29 CFR 1910.110 Storage And Handling NFPA No. 59-1968 NFPA29 CFR 1910.6 - Incorporation By Refer Z12.12-68 Standard for tNFPA29 CFR 1910.103 Hydrogen NFPA No. 51 NFPA29 CFR 1910.103 Hydrogen NFPA No. 496-1967 NFPA29 CFR 1910.125 Additional RequirementNFPA 86A-1969 NFPA29 CFR 1910.124 General Requirements NFPA 34-1995 NFPA29 CFR 1910.156 Fire brigades NFPA No. 1971-1975 NFPA29 CFR 1910.178 Powered Industrial TruNFPA No. 58-1969 NFPA29 CFR Appendix A To Subpart S--Refer NFPA 59-76 NFPA29 CFR 1910L APPENDIX C TO SUBPART 69 NFPA29 CFR Appendix A To Subpart S--Refer NFPA 34-74 NFPA29 CFR Appendix A To Subpart S--Refer NFPA 35-76 NFPA
OSHA
Page 8
29 CFR Appendix A To Subpart S--Refer NFPA 36-74 NFPA29 CFR Appendix A To Subpart S--Refer NFPA 40-74 NFPA29 CFR Appendix A To Subpart S--Refer NFPA 496-74 NFPA29 CFR Appendix A To Subpart S--Refer NFPA 497-75 NFPA29 CFR Appendix A To Subpart S--Refer NFPA 32-74 NFPA29 CFR Appendix A To Subpart S--Refer NFPA 58-76 NFPA29 CFR Appendix A To Subpart S--Refer NFPA 30-78 NFPA29 CFR Appendix A To Subpart S--Refer NFPA 70-78 NFPA29 CFR Appendix A To Subpart S--Refer NFPA 70C-74 NFPA29 CFR Appendix A To Subpart S--Refer NFPA 70E NFPA29 CFR Appendix A To Subpart S--Refer NFPA 72A-75 NFPA29 CFR Appendix A To Subpart S--Refer NFPA 72B-75 NFPA29 CFR Appendix A To Subpart S--Refer NFPA 72C-75 NFPA29 CFR Appendix A To Subpart S--Refer NFPA 72D-75 NFPA29 CFR Appendix A To Subpart S--Refer NFPA 505-75 NFPA29 CFR 1926.57 Ventilation. NFPA 68-1954 NFPA29 CFR 1910L APPENDIX C TO SUBPART 70 NFPA29 CFR 1926.152 Flammable And CombustNFPA 13-1969 NFPA29 CFR 1926.152 Flammable And CombustNFPA 30-1969 NFPA29 CFR 1910.6 Incorporation By ReferenNFPA 505-1969 NFPA29 CFR 1926.152 Flammable And CombustNFPA No. 80-1970 NFPA29 CFR 1926.402 Applicability. 70-1984 NFPA29 CFR 1926.405 Wiring methods, compo70 NFPA29 CFR Appendix A To Subpart S--Refer NFPA 33-73 NFPA29 CFR 1926.57 Ventilation. NFPA No. 34-1966 NFPA29 CFR Appendix A To Subpart S--Refer NFPA 77-72 NFPA29 CFR 1926.57 Ventilation. NFPA 91-1961 NFPA29 CFR Appendix A To Subpart L--Fire PrNFPA-1041 NFPA29 CFR Appendix A To Subpart L--Fire PrNFPA 13A NFPA29 CFR Appendix A To Subpart L--Fire PrNFPA Standard No. 14 NFPA29 CFR Appendix A To Subpart L--Fire PrNFPA 1971-1975 NFPA29 CFR Appendix A To Subpart S--Refer NFPA 101-78 NFPA29 CFR Appendix A To Subpart S--Refer NFPA 20-76 NFPA29 CFR 1926.57 Ventilation. NFPA No. 33-1969 NFPA29 CFR Appendix C To 1910.272--Grain HaNFPA 69 NFPA29 CFR Appendix B To Subpart L--NationNFPA No. 13E NFPA29 CFR Appendix B To Subpart L--NationNFPA No. 24 NFPA29 CFR Appendix B To Subpart L--NationNFPA No. 24 NFPA29 CFR Appendix C To 1910.120--CompliNFPA 471 NFPA29 CFR Appendix C To 1910.120--CompliNFPA 472 NFPA29 CFR Appendix C To 1910.272--Grain HaNFPA 61B NFPA29 CFR Appendix C To 1910.272--Grain HaNFPA 61C NFPA29 CFR Appendix A To Subpart S--Refer NFPA 72E-74 NFPA29 CFR Appendix C To 1910.272--Grain HaNFPA 68 NFPA29 CFR Appendix B to Subpart B--Confi NFPA No. 306 NFPA29 CFR Appendix C To 1910.272--Grain HaNFPA 91 NFPA29 CFR Appendix C To Subpart L--Fire PrNFPA 1001 NFPA29 CFR Appendix C To Subpart L--Fire PrNFPA 1201 NFPA29 CFR Appendix C To Subpart L--Fire PrNFPA 96 NFPA29 CFR Appendix D To 1910.66--Existing NFPA 70-1971 NFPA
OSHA
Page 9
29 CFR Appendix D To 1910.66--Existing NFPA 70-19791 NFPA29 CFR Appendix D To Subpart L--AvailabNFPA No. 1971 NFPA29 CFR Appendix C To 1910.272--Grain HaNFPA 61D NFPA29 CFR Appendix B To 1910.120--GeneralNFPA 1992 NFPA29 CFR 1926.152 Flammable And CombustNFPA 251-1969 NFPA29 CFR Appendix A To Subpart S--Refer NFPA 80-77 NFPA29 CFR Appendix A To Subpart S--Refer NFPA 86A-73 NFPA29 CFR Appendix A To Subpart S--Refer NFPA 88A-73 NFPA29 CFR Appendix A To Subpart S--Refer NFPA 88B-73 NFPA29 CFR Appendix A To Subpart S--Refer NFPA 91-73 NFPA29 CFR Appendix B To §1926.65--General NFPA 1991 NFPA29 CFR Appendix B To Subpart L--NationNFPA No. 1041 NFPA29 CFR Appendix B To 1910.120--GeneralNFPA 1991 NFPA29 CFR Appendix B To Subpart L--Nation101, Life Safety Code NFPA29 CFR Appendix B To 1910.1450--ReferNFPA-45 NFPA29 CFR Appendix B To 1910.272--Grain Ha61 B NFPA29 CFR Appendix B To 1910.272--Grain Ha61 C NFPA29 CFR Appendix B To 1910.272--Grain Ha61 D NFPA29 CFR Appendix B To 1910.272--Grain Ha68 NFPA29 CFR Appendix B To 1910.272--Grain Ha69 NFPA29 CFR Appendix B To 1910.272--Grain Ha91 NFPA29 CFR Appendix A To Subpart S--Refer NFPA 76A-73 NFPA29 CFR Appendix B To §1926.65--General NFPA 1992--Standard on NFPA29 CFR 1910.94 Ventilation. NFPA 91-1961 NFPA29 CFR 1910L APPENDIX C TO SUBPART 15 NFPA29 CFR 1910L APPENDIX B TO SUBPART 11A, High Expansion Fo NFPA29 CFR 1910L APPENDIX C TO SUBPART 13 NFPA29 CFR 1910L APPENDIX C TO SUBPART 13A NFPA29 CFR 1910L APPENDIX C TO SUBPART 14 NFPA29 CFR 1910L APPENDIX C TO SUBPART 14 NFPA29 CFR 1910L APPENDIX B TO SUBPART 12A, Halon 1301 SystemNFPA29 CFR 1910L APPENDIX B TO SUBPART 10, Portable Fire Exting NFPA29 CFR 1910L APPENDIX B TO SUBPART 13, Sprinkler Systems NFPA29 CFR 1910.94 Ventilation. NFPA 68-1954 NFPA29 CFR 1910.94 Ventilation. NFPA No. 33-1969 NFPA29 CFR 1910.6 Incorporation By ReferenNFPA 96-1970 NFPA29 CFR 1910.6 Incorporation By ReferenNFPA 91-1969 NFPA29 CFR 1910L APPENDIX B TO SUBPART 20, Centrifugal Fire PumNFPA29 CFR 1910.6 Incorporation By ReferenNFPA 91-1961 NFPA29 CFR 1910L APPENDIX B TO SUBPART 24, Outside Protection NFPA29 CFR 1910L APPENDIX B TO SUBPART 11, Foam Systems NFPA29 CFR 1910L APPENDIX C TO SUBPART 11 NFPA29 CFR 1910L APPENDIX B TO SUBPART 22, Water Tanks NFPA29 CFR 1910L APPENDIX B TO SUBPART 22, Water Tanks NFPA29 CFR 1926.152 Flammable And CombustNFPA No. 385-1966 NFPA29 CFR 1910L APPENDIX B TO SUBPART 1971, Protective ClothingNFPA29 CFR 1910L APPENDIX C TO SUBPART 231C NFPA29 CFR 1910L APPENDIX B TO SUBPART 69, Explosion Suppressi NFPA29 CFR 1910L APPENDIX B TO SUBPART 12, Carbon Dioxide Sys NFPA29 CFR 1910L APPENDIX C TO SUBPART 10 NFPA
OSHA
Page 10
29 CFR 1910.6 Incorporation By ReferenNFPA 86A-1969 NFPA29 CFR 1910L APPENDIX C TO SUBPART 11A, High Expansion Fo NFPA29 CFR 1910L APPENDIX C TO SUBPART 12 NFPA29 CFR 1910L APPENDIX C TO SUBPART 12A, Halon 1301 SystemNFPA29 CFR 1910L APPENDIX B TO SUBPART 18, Wetting Agents NFPA29 CFR 1910L APPENDIX B TO SUBPART 17, Dry Chemical Syste NFPA29 CFR 1910L APPENDIX B TO SUBPART 16, Foam-Water Spray NFPA29 CFR 1910L APPENDIX B TO SUBPART 15, Water Spray SystemNFPA29 CFR 1910L APPENDIX C TO SUBPART 71 NFPA29 CFR 1910.6 Incorporation By ReferenNFPA 34-1966 NFPA29 CFR 1910L APPENDIX C TO SUBPART 231 NFPA29 CFR 1910L APPENDIX C TO SUBPART 22 NFPA29 CFR 1910.6 Incorporation By ReferenNFPA 101-1970 NFPA29 CFR 1910.6 Incorporation By ReferenNFPA 1971-1975 NFPA29 CFR 1910.6 Incorporation By ReferenNFPA 203M-1970 NFPA29 CFR 1910.6 Incorporation By ReferenNFPA 251-1969 NFPA29 CFR 1910.6 Incorporation By ReferenNFPA 30 (1969) NFPA29 CFR 1910.6 Incorporation By ReferenNFPA 302-1968 NFPA29 CFR 1910.6 Incorporation By ReferenNFPA 32-1970 NFPA29 CFR 1910.6 Incorporation By ReferenNFPA 33-1969 NFPA29 CFR 1910L APPENDIX C TO SUBPART 16 NFPA29 CFR 1910.6 Incorporation By ReferenNFPA 35-1970 NFPA29 CFR 1910.6 Incorporation By ReferenNFPA 36-1967 NFPA29 CFR 1910.6 Incorporation By ReferenNFPA 37-1970 NFPA29 CFR 1910.6 Incorporation By ReferenNFPA 70-1971 NFPA29 CFR 1910L APPENDIX C TO SUBPART 17 NFPA29 CFR 1910L APPENDIX C TO SUBPART 1971 NFPA29 CFR 1910L APPENDIX C TO SUBPART 20 NFPA29 CFR 1910.6 Incorporation By ReferenNFPA 80-1970 NFPA29 CFR 1910.6 Incorporation By ReferenNFPA 80-1968 NFPA29 CFR 1910.6 Incorporation By ReferenNFPA 385-1966 NFPA29 CFR 1910.6 Incorporation By ReferenNFPA 68-1954 NFPA29 CFR 1910.6 Incorporation By ReferenNFPA 51B-1962 NFPA29 CFR 1910.6 Incorporation By ReferenNFPA 496-1967 NFPA29 CFR 1910.6 Incorporation By ReferenNFPA 58-1969 NFPA29 CFR 1910.6 Incorporation By ReferenNFPA 59-1968 NFPA29 CFR 1910L APPENDIX C TO SUBPART 20 NFPA29 CFR Appendix E to Subpart M--Sample A10.14-1991 American NaNSC29 CFR Appendix E to Subpart M--Sample A10.14 NSC29 CFR (Non-mandatory) Appendix A to SuA10.8-1988, Scaffolding NSC (ASC A10)29 CFR 1910.6 Incorporation By ReferenA10.3-70 Safety RequireNSC (ASC A10)29 CFR APPENDIX A TO SUBPART Q--RE A10.9-1983 NSC (ASC A10)29 CFR 1926.705 Requirements For Lift-A10.9-1970 NSC (ASC A10)29 CFR 1926.552 Material hoists, personnA10.5-1969, Safety RequNSC (ASC A10)29 CFR 1910.243 Guarding of portable pA10.3-1970 NSC (ASC A10)29 CFR APPENDIX A TO §1926.703(a)( A10.9-1983 NSC (ASC A10)29 CFR 1910.6 Incorporation By ReferenZ41.1-67 Men's Safety NSC (ASC Z41)29 CFR Appendix B To Subpart I--Non-MaZ41-1991 NSC (ASC Z41)29 CFR 1910.6 Incorporation By ReferenZ41-91, Personal Protec NSC (ASC Z41)29 CFR 1915.5 Incorporation by referencZ41-1991 Personal ProteNSC (ASC Z41)
OSHA
Page 11
29 CFR 1910.136 Foot protection. Z41-1991, Personal ProtNSC (ASC Z41)29 CFR 1917.94 Foot protection. Z-41-1991, American NatNSC (ASC Z41)29 CFR 1918.104 Foot protection. Z-41-1991, American NatNSC (ASC Z41)29 CFR 1918.3 Incorporation by referencZ-41-1991, American NatNSC (ASC Z41)29 CFR 1910.136 Foot protection. Z41.1-1967 NSC (ASC Z41)29 CFR 1917.3 Incorporation By ReferenZ-41-1991, American NatNSC (ASC Z41)29 CFR 1915.5 Incorporation by referencZ41-1983 Personal ProteNSC (ASC Z41)29 CFR 1915.156 Foot protection. Z41-1991, American NatiNSC (ASC Z41)29 CFR 1910L APPENDIX C TO SUBPART Z41.1 NSC (ASC Z41)29 CFR Appendix A to Subpart I--Non-maZ41-1991 NSC (ASC Z41)29 CFR 1910.6 - Incorporation By Refer B71.1-68 Safety Specifi OPEI29 CFR 1910.243 Guarding of portable pB71.1-X1968 OPEI29 CFR 1910.254 Arc welding and cuttinB175.1-1991, Safety Re PPEMA29 CFR 1910.6 - Incorporation By Refer B175.1-1991, Safety Re PPEMA29 CFR 1910.6 - Incorporation By Refer Z4.1-68 Requirements foPSA29 CFR 1910.6 Incorporation By ReferenAAI-RMA Specifications RMA29 CFR 1910.266 Appendix C to §1910.2SAE J386 SAE29 CFR 1910.266 - Logging Operations SAE J1040 SAE29 CFR 1910.266 - Logging Operations SAE J231 SAE29 CFR 1910.266 - Logging Operations SAE J397 SAE29 CFR 1926.1001 - Minimum Performance SAE J394 SAE29 CFR 1910.266 Appendix C to §1910.2SAE J231 SAE29 CFR 1910.266 - Logging Operations SAE J185 SAE29 CFR 1910.266 Appendix C to §1910.2SAE J397 SAE29 CFR 1910.266 Appendix C to §1910.2SAE J1040 SAE29 CFR 1926.550 - Cranes and derricks SAE J959-1966 SAE29 CFR 1928.51 - Roll-Over Protective StSAE J334-1970 SAE29 CFR 1928.51 - Roll-Over Protective StSAE J168-1970 SAE29 CFR 1926.602 - Material Handling E SAE J321a-1970 SAE29 CFR 1926.602 - Material Handling E SAE J166-1971 SAE29 CFR 1926.602 - Material Handling E SAE J237-1971 SAE29 CFR 1910.266 - Logging Operations SAE J386 SAE29 CFR 1926.1001 - Minimum Performance SAE J395 SAE29 CFR 1926.602 - Material Handling E SAE J319b-1971 SAE29 CFR 1910.180 - Crawler locomotive aSAE J765 SAE29 CFR 1926.602 - Material Handling E SAE J236-1971 SAE29 CFR 1926.550 - Cranes and derricks SAE J743a-1964 SAE29 CFR 1926.1001 - Minimum Performance SAE J320a SAE29 CFR 1926.1001 - Minimum Performance SAE J396 SAE29 CFR 1926.1001 - Minimum Performance SAE J397 (1969) SAE29 CFR 1926.1002 - Protective frames (roSAE J333a SAE29 CFR 1926.1003 - Overhead protection fSAE J167-1970 SAE29 CFR (Non-mandatory) Appendix A to SuA92 SIA (ASC A92)29 CFR Appendix E To 1910.269--Refer A92.2-1990, American NaSIA (ASC A92)29 CFR Non-Mandatory Appendix C to SubA92.3-1990 Manually ProSIA (ASC A92)29 CFR 1910.268 Telecommunications. A92.2-1969 SIA (ASC A92)29 CFR Non-Mandatory Appendix C to SubA92.6-1990 Self-Propell SIA (ASC A92)29 CFR 1926.453 Aerial lifts. A92.2-1969 SIA (ASC A92)29 CFR Non-Mandatory Appendix C to SubA92.7-1990 Airline Grou SIA (ASC A92)29 CFR 1926.452 Additional requirements A92.5 SIA (ASC A92)
OSHA
Page 12
29 CFR 1926.452 Additional requirements A92.6 SIA (ASC A92)29 CFR Non-Mandatory Appendix C to SubA92.2-1990 Vehicle-MounSIA (ASC A92)29 CFR Non-Mandatory Appendix C to SubA92.9-1993 Mast-Climbi SIA (ASC A92)29 CFR 1910.67 Vehicle-mounted elevatiA92.2--1969 SIA (ASC A92)29 CFR 1910.6 - Incorporation By Refer A92.2-69 Standard for VSIA (ASC A92)29 CFR Non-Mandatory Appendix C to SubA92.8-1993 Vehicle-MouSIA (ASC A92)29 CFR Non-Mandatory Appendix C to SubA92.5-1990 Boom SupporSIA (ASC A92)29 CFR 1915.5 Incorporation by referencB7.1-1964 Safety Code fUAMA29 CFR 1910.215 Abrasive wheel machinB7.1-1970 UAMA29 CFR 1910.218 Forging machines. B7.1-1970, Safety Code fUAMA29 CFR 1910.6 - Incorporation By Refer B7.1-70 Safety Code for UAMA29 CFR 1910.6 Incorporation By ReferenUL 142-68 UL29 CFR 1910.6 Incorporation By ReferenUL 58-61 UL29 CFR 1910.6 Incorporation By ReferenUL 80-63 UL29 CFR 1910.6 - Incorporation By Refer O1.1-54 (R 61) Safety WMMA
OSHA
Page 13
Official Standard . Official Standard TitleANSI Z129.1-2000 Hazardous Industrial Chemicals - Precautionary LabelingANSI/ACI 318-89 Building Code Requirements for Reinforced Concrete and CommentaryANSI Z9.2-1979 (R1991) Design and Operation of Local Exhaust Systems, Fundamentals Governing theANSI Z9.2-1979 (R1991) Design and Operation of Local Exhaust Systems, Fundamentals Governing theANSI Z9.2-1979 (R1991) Design and Operation of Local Exhaust Systems, Fundamentals Governing theANSI Z9.2-1979 (R1991) Design and Operation of Local Exhaust Systems, Fundamentals Governing theANSI Z9.1-1991 Exhaust Systems - Open-Surface Tanks - Ventilation and OperationANSI Z9.2-1979 (R1991) Design and Operation of Local Exhaust Systems, Fundamentals Governing theANSI Z9.2-1979 (R1991) Design and Operation of Local Exhaust Systems, Fundamentals Governing theANSI Z9.2-1979 (R1991) Design and Operation of Local Exhaust Systems, Fundamentals Governing theANSI Z9.1-1991 Exhaust Systems - Open-Surface Tanks - Ventilation and OperationANSI Z9.1-1991 Exhaust Systems - Open-Surface Tanks - Ventilation and OperationANSI A14.4-1992 Job-Made Wooden Ladders, Safety Requirements forANSI A14.3-1992 Ladders - Fixed - Safety RequirementsANSI A14.2-2000 Portable Metal Ladders, Safety Requirements for (revision of ANSI A14.2-1990)ANSI A14.1-2000 Ladders - Portable Wood, Safety Requirements for (revision of ANSI A14.1-1994)ANSI A14.5-2000 Ladders - Portable Reinforced Plastic - Safety Requirements (revision of ANSI A14ANSI A14.1-2000 Ladders - Portable Wood, Safety Requirements for (revision of ANSI A14.1-1994)ANSI A14.3-1992 Ladders - Fixed - Safety RequirementsANSI A14.5-2000 Ladders - Portable Reinforced Plastic - Safety Requirements (revision of ANSI A14ANSI A14.2-2000 Portable Metal Ladders, Safety Requirements for (revision of ANSI A14.2-1990)ANSI A14.1-2000 Ladders - Portable Wood, Safety Requirements for (revision of ANSI A14.1-1994)ANSI A14.5-2000 Ladders - Portable Reinforced Plastic - Safety Requirements (revision of ANSI A14ANSI A14.1-2000 Ladders - Portable Wood, Safety Requirements for (revision of ANSI A14.1-1994)ANSI A14.2-2000 Portable Metal Ladders, Safety Requirements for (revision of ANSI A14.2-1990)ANSI A14.2-2000 Portable Metal Ladders, Safety Requirements for (revision of ANSI A14.2-1990)ANSI A14.5-2000 Ladders - Portable Reinforced Plastic - Safety Requirements (revision of ANSI A14ANSI A14.2-2000 Portable Metal Ladders, Safety Requirements for (revision of ANSI A14.2-1990)ANSI A14.1-2000 Ladders - Portable Wood, Safety Requirements for (revision of ANSI A14.1-1994)ANSI A14.2-2000 Portable Metal Ladders, Safety Requirements for (revision of ANSI A14.2-1990)ANSI A14.1-2000 Ladders - Portable Wood, Safety Requirements for (revision of ANSI A14.1-1994)ANSI A14.3-1992 Ladders - Fixed - Safety RequirementsANSI A14.3-1992 Ladders - Fixed - Safety RequirementsANSI A14.1-2000 Ladders - Portable Wood, Safety Requirements for (revision of ANSI A14.1-1994)ANSI A14.2-2000 Portable Metal Ladders, Safety Requirements for (revision of ANSI A14.2-1990)ANSI A14.3-1992 Ladders - Fixed - Safety RequirementsANSI A14.5-2000 Ladders - Portable Reinforced Plastic - Safety Requirements (revision of ANSI A14API RP 2220 Improving Owner and Contractor Safety PerformanceAPI STD 620 Design and Construction of Large, Welded, Low-Pressure Storage Tanks Ninth Edition; Addendum 1-December 1996; Additional Pages for Addendum 1-February 1997; Addendum 2-December 1997; Addendum 3-December 1998API STD 620API STD 620 Design and Construction of Large, Welded, Low-Pressure Storage Tanks Ninth Edition; Addendum 1-December 1996; Additional Pages for Addendum 1-February 1997; Addendum 2-December 1997; Addendum 3-December 1998API RP 2201 Procedures for Welding or Hot Tapping on Equipment in ServiceAPI RP 2201 Procedures for Welding or Hot Tapping on Equipment in ServiceAPI STD 620ANSI/API 2000-1992API STD 650 Welded Steel Tanks for Oil Storage Tenth Edition; Addendum 1, March 2000ANSI/API 1104-1999 Welding of Pipelines and Related FacilitiesAPI STD 620ANSI/API 1104-1999 Welding of Pipelines and Related Facilities
2-December 1997; Addendum 3-December 1998
2-December 1997; Addendum 3-December 1998Edition; Errata - November 15, 1999
2-December 1997; Addendum 3-December 1998
OSHA
Page 14
API RP 750 Management of Process Hazards First Edition; Erratum - 1990RP 2201 Procedures for Welding or Hot Tapping on Equipment in ServiceRP 2201 Procedures for Welding or Hot Tapping on Equipment in ServiceAPI RP 2220 Improving Owner and Contractor Safety PerformanceANSI/API 1104-1999 Welding of Pipelines and Related FacilitiesAPI RP 750 Management of Process Hazards First Edition; Erratum - 1990API RP 2220 Improving Owner and Contractor Safety PerformanceANSI/API 2000-1992API STD 650 Welded Steel Tanks for Oil Storage Tenth Edition; Addendum 1, March 2000ANSI S1.4-1983 (R1997) Sound Level Meters, Specification forANSI S1.11-1986 (R1998) Octave-Band and Fractional Octave-Band Analog and Digital Filters, Specifications forANSI S1.4-1983 (R1997) Sound Level Meters, Specification forANSI S3.6-1996 Specification for AudiometersASAE S383.1 DEC99 Roll-Over Protective Structures (ROPS) for Wheeled Agricultural TractorsASME B15.1-2000 Safety Standard for Mechanical Power Transmission Apparatus,ASME BPVCASME B31.1-1998 Power PipingASME A13.1-1996 Scheme for the Identification of Piping SystemsASME BPVC SEC VII Recommended Guidelines for the Care of Power Boilers Non-InterfiledASME B31.1-1998 Power PipingASME A120.1-1996 Safety Requirements for Powered Platforms for Building MaintenanceASME A90.1-1997 Safety Standard for Belt ManliftsASME B31.5-2000 Refrigeration PipingASME B31.3-1999 Edition Process PipingASME B31.1-1998 Power PipingASME BPVC SEC VIII Rules for Construction of Pressure VesselsASME B30.5-2000 Mobile and Locomotive CranesASME B30.2c-2001 Overhead and Gantry Cranes (Top Running Bridge, Single or Multiple Girder, Top Running Trolley Hoist)ASME B30.2c-2001 Overhead and Gantry Cranes (Top Running Bridge, Single or Multiple Girder, Top Running Trolley Hoist)ASME B30.9-1996 SlingsASME A17.2.1-1996 Inspectors' Manual for Electric ElevatorsASME B30.2c-2001 Overhead and Gantry Cranes (Top Running Bridge, Single or Multiple Girder, Top Running Trolley Hoist)ASME A90.1-1997 Safety Standard for Belt ManliftsASME B20.1-2000 Safety Standard for Conveyors and Related EquipmentASME B20.1-2000 Safety Standard for Conveyors and Related EquipmentASME B30.2c-2001 Overhead and Gantry Cranes (Top Running Bridge, Single or Multiple Girder, Top Running Trolley Hoist)ASME B30.5-2000 Mobile and Locomotive CranesASME B30.6-1995 DerricksASME B31.1-1998 Power PipingASME B20.1-2000 Safety Standard for Conveyors and Related EquipmentASME B15.1-2000 Safety Standard for Mechanical Power Transmission Apparatus,ASME A17.1-2000 Elevators and Escalators, Safety Code forASME BPVC SEC VIII Rules for Construction of Pressure VesselsASME B20.1-2000 Safety Standard for Conveyors and Related EquipmentASME A17.1-2000 Elevators and Escalators, Safety Code forASME B30.2c-2001 Overhead and Gantry Cranes (Top Running Bridge, Single or Multiple Girder, Top Running Trolley Hoist)ASME B30.3-1996 Construction Tower CranesASME B30.4a-1998 Portal, Tower, and Pedestal CranesASME B30.5-2000 Mobile and Locomotive CranesASME B30.6-1995 Derricks
Edition; Errata - November 15, 1999
OSHA
Page 15
ASME B30.7-2001 Base Mounted Drum HoistsASME BPVCASME B30.8-1999 Floating Cranes and Floating DerricksASME B30.11a-1999 Monorails and Underhung CranesASME B30.12-1992 Handling Loads Suspended from RotorcraftASME B31.1-1998 Power PipingASME B30.16-1998 Overhead Hoists (Underhung)ASME B20.1-2000 Safety Standard for Conveyors and Related EquipmentASME BPVC SEC VII Recommended Guidelines for the Care of Power Boilers Non-InterfiledASME BPVC SEC VIII Rules for Construction of Pressure VesselsASME B56.1-2000 Low Lift and High Lift TrucksASME BPVC SEC VIII Rules for Construction of Pressure Vessels DIVISION 1 Non-InterfiledASME BPVC SEC VIII Rules for Construction of Pressure VesselsASME B56.1-2000 Low Lift and High Lift TrucksASME B30.6-1995 DerricksASME BPVC SEC VIII Rules for Construction of Pressure VesselsASME B30.9-1996 SlingsASME B56.1-2000 Low Lift and High Lift TrucksASME B56.6-1992 Rough Terrain Forklift TrucksASME BPVC SEC VII Recommended Guidelines for the Care of Power Boilers Non-InterfiledASME B56.1-2000 Low Lift and High Lift TrucksASME B30.13 Storage/Retrieval (S/R) Machines and Associated EquipmentASME A120.1-1996 Safety Requirements for Powered Platforms for Building MaintenanceASME B31.3-1999 Edition Process PipingASME B31.1-1998 Power PipingASME BPVC SEC VIII DIVISIO SECTION VIII Rules for Construction of Pressure Vessels DIVISION 1 Non-InterfiledASME B31.1-1998 Power PipingASME BPVCASME A13.1-1996 Scheme for the Identification of Piping SystemsASME BPVC SEC VII Recommended Guidelines for the Care of Power Boilers Non-InterfiledASME B31.5-2000 Refrigeration PipingASME B30.5-2000 Mobile and Locomotive CranesASME BPVCASME B31.1-1998 Power PipingASME BPVC SEC VII Recommended Guidelines for the Care of Power Boilers Non-InterfiledASME B30.6-1995 DerricksASME BPVCASME B31.5-2000 Refrigeration PipingASME B56.6-1992 Rough Terrain Forklift TrucksASME B31.1-1998 Power PipingASME B31.1-1998 Power PipingANSI Z87.1-1989 (R1998) Practice for Occupational and Educational Eye and Face Protection ANSI A1264.1-1995 Safety Requirements for Workplace Floor and Wall Openings, Stairs, and Railing SystemsANSI Z87.1-1989 (R1998) Practice for Occupational and Educational Eye and Face ProtectionANSI Z87.1-1989 (R1998) Practice for Occupational and Educational Eye and Face ProtectionANSI Z87.1-1989 (R1998) Practice for Occupational and Educational Eye and Face ProtectionANSI Z87.1-1989 (R1998) Practice for Occupational and Educational Eye and Face ProtectionANSI Z87.1-1989 (R1998) Practice for Occupational and Educational Eye and Face ProtectionANSI Z87.1-1989 (R1998) Practice for Occupational and Educational Eye and Face ProtectionANSI Z87.1-1989 (R1998) Practice for Occupational and Educational Eye and Face Protection
OSHA
Page 16
ANSI Z87.1-1989 (R1998) Practice for Occupational and Educational Eye and Face ProtectionANSI Z87.1-1989 (R1998) Practice for Occupational and Educational Eye and Face ProtectionANSI Z87.1-1989 (R1998) Practice for Occupational and Educational Eye and Face ProtectionANSI Z87.1-1989 (R1998) Practice for Occupational and Educational Eye and Face ProtectionF1117 Standard Specification for Dielectric Overshoe FootwearF1116 Standard Test Method for Determining Dielectric Strength of Overshoe FootwearF1236 Standard Guide for Visual Inspection of Electrical Protective Rubber ProductsF1505 Standard Specification for Insulated and Insulating Hand ToolsD178 Standard Specification for Rubber Insulating MattingD149 Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power FrequenciesD1051 Standard Specification for Rubber Insulating SleevesF712 Standard Test Methods for Electrically Insulating Plastic Guard Equipment for Protection of WorkersD1050 Standard Specification for Rubber Insulating Line HoseD1049 Standard Specification for Rubber Insulating CoversD1048 Standard Specification for Rubber Insulating BlanketsD323 Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method)A53/A53M Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and SeamlessB210 Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless TubesB241/B241M Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded TubeB88 Standard Specification for Seamless Copper Water TubeD2161 Standard Practice for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity
D120 Standard Specification for Rubber Insulating GlovesD5 Standard Test Method for Penetration of Bituminous MaterialsF496 Standard Specification for In-Service Care of Insulating Gloves and SleevesB241/B241M Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded TubeB88 Standard Specification for Seamless Copper Water TubeB88 Standard Specification for Seamless Copper Water TubeF1679 Standard Test Method for Using a Variable Incidence Tribometer (VIT)D2161 Standard Practice for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol ViscosityB117 Standard Practice for Operating Salt Spray (Fog) ApparatusD445 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (the Calculation of Dynamic Viscosity)A53/A53M Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and SeamlessD56 Standard Test Method for Flash Point by Tag Closed TesterD86 Standard Test Method for Distillation of Petroleum Products at Atmospheric PressureD88 Standard Test Method for Saybolt ViscosityD93 Standard Test Methods for Flash-Point by Pensky-Martens Closed Cup TesterD88 Standard Test Method for Saybolt ViscosityD86 Standard Test Method for Distillation of Petroleum Products at Atmospheric PressureD56 Standard Test Method for Flash Point by Tag Closed TesterD323 Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method)F968 Standard Specification for Electrically Insulating Plastic Guard Equipment for Protection of Workers
F478 Standard Specification for In-Service Care of Insulating Line Hose and CoversF479 Standard Specification for In-Service Care of Insulating BlanketsF711 Standard Specification for Fiberglass-Reinforced Plastic (FRP) Rod and Tube Used in Live Line ToolsF819 Standard Terminology Relating to Electrical Protective Equipment for WorkersF855 Standard Specifications for Temporary Protective Grounds to Be Used on De-energized Electric Power Lines and EquipmentB210 Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless TubesF914 Standard Test Method for Acoustic Emission for Insulated Aerial Personnel Devices
OSHA
Page 17
F1506 Standard Performance Specification for Textile Materials for Wearing Apparel for Use by Electrical Workers Exposed to Momentary Electric Arc and Related Thermal HazardsF1677 Standard Test Method for Using a Portable Inclineable Articulated Strut Slip Tester (PIAST)D93 Standard Test Methods for Flash-Point by Pensky-Martens Closed Cup Tester
A126 Standard Specification for Gray Iron Castings for Valves, Flanges, and Pipe FittingsA391/A391M Standard Specification for Grade 80 Alloy Steel ChainA395/A395M Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated TemperaturesA47/A47M Standard Specification for Ferritic Malleable Iron CastingsF887 Standard Specifications for Personal Climbing EquipmentD1050 Standard Specification for Rubber Insulating Line HoseD1051 Standard Specification for Rubber Insulating SleevesC918 Standard Test Method for Measuring Early-Age Compressive Strength and Projecting Later-Age StrengthD323 Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method)D3278 Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup ApparatusD56 Standard Test Method for Flash Point by Tag Closed TesterD93 Standard Test Methods for Flash-Point by Pensky-Martens Closed Cup TesterE329 Standard Specification for Agencies Engaged in the Testing and/or Inspection of Materials Used in ConstructionD3278 Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup ApparatusD1048 Standard Specification for Rubber Insulating BlanketsD1049 Standard Specification for Rubber Insulating CoversA47/A47M Standard Specification for Ferritic Malleable Iron CastingsF496 Standard Specification for In-Service Care of Insulating Gloves and SleevesC873 Standard Test Method for Compressive Strength of Concrete Cylinders Cast in Place in Cylindrical Molds
D93 Standard Test Methods for Flash-Point by Pensky-Martens Closed Cup TesterD120 Standard Specification for Rubber Insulating GlovesD120 Standard Specification for Rubber Insulating GlovesD178 Standard Specification for Rubber Insulating MattingB88 Standard Specification for Seamless Copper Water TubeF478 Standard Specification for In-Service Care of Insulating Line Hose and CoversF479 Standard Specification for In-Service Care of Insulating BlanketsD323 Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method)D56 Standard Test Method for Flash Point by Tag Closed TesterD1049 Standard Specification for Rubber Insulating CoversA53/A53M Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and SeamlessD653 Standard Terminology Relating to Soil, Rock, and Contained FluidsD3176 Standard Practice for Ultimate Analysis of Coal and CokeD3180 Standard Practice for Calculating Coal and Coke Analyses from As-Determined to Different BasesD2488 Standard Practice for Description and Identification of Soils (Visual-Manual Procedure)D56 Standard Test Method for Flash Point by Tag Closed TesterA395/A395M Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated TemperaturesD86 Standard Test Method for Distillation of Petroleum Products at Atmospheric PressureD93 Standard Test Methods for Flash-Point by Pensky-Martens Closed Cup TesterF855 Standard Specifications for Temporary Protective Grounds to Be Used on De-energized Electric Power Lines and EquipmentD86 Standard Test Method for Distillation of Petroleum Products at Atmospheric PressureF711 Standard Specification for Fiberglass-Reinforced Plastic (FRP) Rod and Tube Used in Live Line ToolsC803/C803M Standard Test Method for Penetration Resistance of Hardened ConcreteA126 Standard Specification for Gray Iron Castings for Valves, Flanges, and Pipe FittingsC42/C42M Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of ConcreteD445 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (the Calculation of Dynamic Viscosity)
OSHA
Page 18
C684 Standard Test Method for Making, Accelerated Curing, and Testing Concrete Compression Test Specimens
C192/C192M Standard Practice for Making and Curing Concrete Test Specimens in the LaboratoryC31/C31M Standard Practice for Making and Curing Concrete Test Specimens in the FieldC39/C39M Standard Test Method for Compressive Strength of Cylindrical Concrete SpecimensD323 Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method)C513 Standard Test Method for Obtaining and Testing Specimens of Hardened Lightweight Insulating Concrete for Compressive StrengthC495 Standard Test Method for Compressive Strength of Lightweight Insulating ConcreteAWS A3.0-94 Standard Welding Terms and DefinitionsANSI Z49.1-1999 Welding, Cutting and Allied Processes, Safety inANSI Z49.1-1999 Welding, Cutting and Allied Processes, Safety inZ48.1 Portable Compressed Gas Containers to Indentify the Material Contained, Method of MarkingCGA Z48.1 Portable Compressed Gas Containers to Indentify the Material Contained, Method of MarkingCGA Z48.1 Portable Compressed Gas Containers to Indentify the Material Contained, Method of MarkingANSI/CGA V-1-1994 Compressed Gas Cylinder Valve Outlet and Inlet ConnectionsZ48.1 Portable Compressed Gas Containers to Indentify the Material Contained, Method of MarkingANSI K61.1-1999 Safety Requirements for the Storage and Handling of Anhydrous AmmoniaANSI K61.1-1999 Safety Requirements for the Storage and Handling of Anhydrous AmmoniaANSI K61.1-1999 Safety Requirements for the Storage and Handling of Anhydrous AmmoniaANSI K61.1-1999 Safety Requirements for the Storage and Handling of Anhydrous AmmoniaIEEE 978-1984 IEEE Guide for In-Service Maintenance and Electrical Testing of Live-Line ToolsIEEE 463-1994 Electrical Safety Practices in Electrolytic Cell-Line Working ZonesIEEE 516-1995 Guide for Maintenance Methods on Energized Power LinesIEEE 100-1988 IEEE Standard Dictionary of Electrical and Electronic Terms978-1984 IEEE Guide for In-Service Maintenance and Electrical Testing of Live-Line ToolsIEEE 978-1984 IEEE Guide for In-Service Maintenance and Electrical Testing of Live-Line ToolsIEEE 1048-1990 Guide for Protective Grounding of Power LinesIEEE 935-1995 Terminology for Tools and Equipment to be Used in Live Line WorkingIEEE 1067-1996 Guide for In-Service Use, Care, Maintenance, and Testing of Conductive Clothing for Use on Voltages up to 765 kV ACIEEE 4-1995 Standard Techniques for High-Voltage TestingIEEE 516-1995 Guide for Maintenance Methods on Energized Power LinesIEEE 524-1993 (R1998) Installation of Overhead Transmission Line Conductors, Guide to theIEEE 62-1995 Guide for Diagnostic Field Testing of Electric Power Apparatus - Part 1: Oil Filled Power Transformers, Regulators, and ReactorsIEEE 957-1995 Guide for Cleaning InsulatorsIEEE 516-1995 Guide for Maintenance Methods on Energized Power LinesIEEE 516-1995 Guide for Maintenance Methods on Energized Power LinesIEEE 4-1995 Standard Techniques for High-Voltage TestingIEEE 957-1995 Guide for Cleaning InsulatorsIEEE 4-1995 Standard Techniques for High-Voltage TestingIEEE 935-1995 Terminology for Tools and Equipment to be Used in Live Line WorkingANSI/IES RP7-1990 Practice for Industrial LightingANSI/IES RP7-1990 Practice for Industrial LightingANSI/IES RP7-1990 Practice for Industrial LightingANSI/IES RP7-1990 Practice for Industrial LightingANSI Z133.1-1994 Tree Care Operations - Pruning, Trimming, Repairing, Maintaining, and Removing Trees, and Cutting Brush - Safety RequirementsANSI Z89.1-1997 Industrial Head ProtectionANSI Z89.1-1997 Industrial Head ProtectionANSI Z308.1-1998 Industrial Unit-Type First Aid Kits, Minimum Requirements forANSI Z89.1-1997 Industrial Head ProtectionANSI Z89.1-1997 Industrial Head Protection
OSHA
Page 19
ANSI Z89.1-1997 Industrial Head ProtectionANSI Z308.1-1998 Industrial Unit-Type First Aid Kits, Minimum Requirements forANSI Z89.1-1997 Industrial Head ProtectionANSI Z89.1-1997 Industrial Head ProtectionANSI Z89.1-1997 Industrial Head ProtectionANSI Z89.1-1997 Industrial Head ProtectionANSI Z89.1-1997 Industrial Head ProtectionANSI Z89.1-1997 Industrial Head ProtectionANSI Z89.1-1997 Industrial Head ProtectionANSI Z88.2-1992 Respiratory ProtectionANSI Z88.2-1992 Respiratory ProtectionANSI Z535.1-1998 Safety Color CodeEW 1 Electric Arc Welding Power Sources Revision No. 1 - November 1991EW 1 Electric Arc Welding Power Sources Revision No. 1 - November 1991NFPA 54 Edition: 1999 National Fuel Gas CodeNFPA 54 Edition: 1999 National Fuel Gas CodeNFPA 37 Edition: 1998 Standard for the Installation and Use of Stationary Combustion Engines and Gas TurbinesNFPA 203 Edition: 2000 Guide on Roof Coverings and Roof Deck ConstructionsNFPA 91 Edition: 1999 Standard for Exhaust Systems for Air Conveying of Vapors, Gases, Mists, and Noncombustible Particulate SolidsNFPA 86 Edition: 1999 Standard for Ovens and FurnacesNFPA 80 Edition: 1999 Standard for Fire Doors and Fire WindowsNFPA 58 Edition: 2001 Liquefied Petroleum Gas CodeNFPA 37 Edition: 1998 Standard for the Installation and Use of Stationary Combustion Engines and Gas TurbinesNFPA 34 Edition: 2000 Standard for Dipping and Coating Processes Using Flammable or Combustible LiquidsNFPA 36 Edition: 2001 Standard for Solvent Extraction PlantsNFPA 35 Edition: 1999 Standard for the Manufacture of Organic CoatingsNFPA 32 Edition: 2000 Standard for Drycleaning PlantsNFPA 251 Edition: 1999 Standard Methods of Tests of Fire Endurance of Building Construction and MaterialsNFPA 385 Edition: 2000 Standard for Tank Vehicles for Flammable and Combustible LiquidsNFPA 220 Edition: 1999 Standard on Types of Building ConstructionNFPA 302 Edition: 1998 Fire Protection Standard for Pleasure and Commercial Motor CraftNFPA 54 Edition: 1999 National Fuel Gas CodeNFPA 101 Edition: 2000 Code for Safety to Life from Fire in Buildings and StructuresNFPA 80 Edition: 1999 Standard for Fire Doors and Fire WindowsNFPA 51B Edition: 1999 Standard for Fire Prevention During Welding, Cutting, and Other Hot WorkNFPA 70 Edition: 1999 National Electrical CodeNFPA 96 Edition: 1998 Standard for Ventilation Control and Fire Protection of Commercial Cooking OperationsNFPA 30 Edition: 2000 Flammable and Combustible Liquids CodeNFPA 59 Edition: 2001 Utility LP-Gas Plant CodeANSI/NFPA 655-1993 Prevention of Sulfur Fires and ExplosionsNFPA 51 Edition: 1997 Standard for the Design and Installation of Oxygen-Fuel Gas Systems for Welding, Cutting, and Allied ProcessesNFPA 496 Edition: 1998 Standard for Purged and Pressurized Enclosures for Electrical EquipmentNFPA 86 Edition: 1999 Standard for Ovens and FurnacesNFPA 34 Edition: 2000 Standard for Dipping and Coating Processes Using Flammable or Combustible LiquidsNFPA 1971 Edition: 2000 Standard on Protective Ensemble For Structural Fire FightingNFPA 58 Edition: 2001 Liquefied Petroleum Gas CodeNFPA 59 Edition: 2001 Utility LP-Gas Plant CodeNFPA 69 Edition: 1997 Standard on Explosion Prevention SystemsNFPA 34 Edition: 2000 Standard for Dipping and Coating Processes Using Flammable or Combustible LiquidsNFPA 35 Edition: 1999 Standard for the Manufacture of Organic Coatings
OSHA
Page 20
NFPA 36 Edition: 2001 Standard for Solvent Extraction PlantsNFPA 40 Edition: 1997 Standard for the Storage and Handling of Cellulose Nitrate Motion Picture FilmNFPA 496 Edition: 1998 Standard for Purged and Pressurized Enclosures for Electrical EquipmentNFPA 497 Edition: 1997 Recommended Practice for the Classification of Flammable Liquids, Gases, or Vapors and of Hazardous (Classified) Locations for Electrical Installations in Chemical Process AreasNFPA 32 Edition: 2000 Standard for Drycleaning PlantsNFPA 58 Edition: 2001 Liquefied Petroleum Gas CodeNFPA 30 Edition: 2000 Flammable and Combustible Liquids CodeNFPA 70 Edition: 1999 National Electrical CodeNFPA 70 Edition: 1999 National Electrical CodeNFPA 70E Edition: 2000 Standard for Electrical Safety Requirements for Employee WorkplacesNFPA 72 Edition: 1999 National Fire Alarm CodeNFPA 72 Edition: 1999 National Fire Alarm CodeNFPA 72 Edition: 1999 National Fire Alarm CodeNFPA 72 Edition: 1999 National Fire Alarm CodeNFPA 505 Edition: 1999 Fire Safety Standard for Powered Industrial Trucks Including Type Designations, Areas of Use, Conversions, Maintenance, and OperationNFPA 68 Edition: 1998 Guide for Venting of DeflagrationsNFPA 70 Edition: 1999 National Electrical CodeNFPA 13 Edition: 1999 Standard for the Installation of Sprinkler SystemsNFPA 30 Edition: 2000 Flammable and Combustible Liquids CodeNFPA 505 Edition: 1999 Fire Safety Standard for Powered Industrial Trucks Including Type Designations, Areas of Use, Conversions, Maintenance, and OperationNFPA 80 Edition: 1999 Standard for Fire Doors and Fire WindowsNFPA 70 Edition: 1999 National Electrical CodeNFPA 70 Edition: 1999 National Electrical CodeNFPA 33 Edition: 2000 Standard for Spray Application Using Flammable or Combustible MaterialsNFPA 34 Edition: 2000 Standard for Dipping and Coating Processes Using Flammable or Combustible LiquidsNFPA 77 Edition: 2000 Recommended Practice on Static ElectricityNFPA 91 Edition: 1999 Standard for Exhaust Systems for Air Conveying of Vapors, Gases, Mists, and Noncombustible Particulate SolidsNFPA 1041 Edition: 1996 Standard for Fire Service Instructor Professional QualificationsNFPA 13 Edition: 1999 Standard for the Installation of Sprinkler SystemsNFPA 14 Edition: 2000 Standard for the Installation of Standpipe, Private Hydrants, and Hose SystemsNFPA 1971 Edition: 2000 Standard on Protective Ensemble For Structural Fire FightingNFPA 101 Edition: 2000 Code for Safety to Life from Fire in Buildings and StructuresNFPA 20 Edition: 1999 Standard for the Installation of Stationary Pumps for Fire ProtectionNFPA 33 Edition: 2000 Standard for Spray Application Using Flammable or Combustible MaterialsNFPA 69 Edition: 1997 Standard on Explosion Prevention SystemsNFPA 13E Edition: 2000 Recommended Practice for Fire Department Operations in Properties Protected by Sprinkler and Standpipe SystemsNFPA 24 Edition: 1995 Standard for the Installation of Private Fire Service Mains and Their AppurtenancesNFPA 24 Edition: 1995 Standard for the Installation of Private Fire Service Mains and Their AppurtenancesNFPA 471 Edition: 1997 Recommended Practice for Responding to Hazardous Materials IncidentsNFPA 472 Edition: 1997 Standard for Professional Competence of Responders to Hazardous Materials IncidentsNFPA 61 Edition: 1999 Standard for the Prevention of Fires and Dust Explosions in Agricultural and Food Products FacilitiesNFPA 61 Edition: 1999 Standard for the Prevention of Fires and Dust Explosions in Agricultural and Food Products FacilitiesNFPA 72 Edition: 1999 National Fire Alarm CodeNFPA 68 Edition: 1998 Guide for Venting of DeflagrationsNFPA 306 Edition: 1997 Standard for the Control of Gas Hazards on VesselsNFPA 91 Edition: 1999 Standard for Exhaust Systems for Air Conveying of Vapors, Gases, Mists, and Noncombustible Particulate SolidsNFPA 1001 Edition: 1997 Standard for Fire Fighter Professional QualificationsNFPA 1201 Edition: 2000 Standard for Developing Fire Protection Services for the PublicNFPA 96 Edition: 1998 Standard for Ventilation Control and Fire Protection of Commercial Cooking OperationsNFPA 70 Edition: 1999 National Electrical Code
OSHA
Page 21
NFPA 70 Edition: 1999 National Electrical CodeNFPA 1971 Edition: 2000 Standard on Protective Ensemble For Structural Fire FightingNFPA 61 Edition: 1999 Standard for the Prevention of Fires and Dust Explosions in Agricultural and Food Products FacilitiesNFPA 1992 Edition: 2000 Standard on Liquid Splash-Protective Ensembles and Clothing for Hazardous Materials EmergenciesNFPA 251 Edition: 1999 Standard Methods of Tests of Fire Endurance of Building Construction and MaterialsNFPA 80 Edition: 1999 Standard for Fire Doors and Fire WindowsNFPA 86 Edition: 1999 Standard for Ovens and FurnacesNFPA 88A Edition: 1998 Standard for Parking StructuresNFPA 88B Edition: 1997 Standard for Repair GaragesNFPA 91 Edition: 1999 Standard for Exhaust Systems for Air Conveying of Vapors, Gases, Mists, and Noncombustible Particulate SolidsNFPA 1991 Edition: 2000 Standard on Vapor-Protective Ensembles for Hazardous Materials EmergenciesNFPA 1041 Edition: 1996 Standard for Fire Service Instructor Professional QualificationsNFPA 1991 Edition: 2000 Standard on Vapor-Protective Ensembles for Hazardous Materials EmergenciesNFPA 101 Edition: 2000 Code for Safety to Life from Fire in Buildings and StructuresNFPA 45 Edition: 2000 Standard on Fire Protection for Laboratories Using ChemicalsANSI/NFPA 61-1999 Prevention of Fire and Dust Explosions in Agricultural and Food Product FacilitiesANSI/NFPA 61-1999 Prevention of Fire and Dust Explosions in Agricultural and Food Product FacilitiesANSI/NFPA 61-1999 Prevention of Fire and Dust Explosions in Agricultural and Food Product FacilitiesNFPA 68 Edition: 1998 Standard on Explosion Prevention SystemsNFPA 69 Edition: 1997 Standard on Explosion Prevention SystemsNFPA 91 Edition: 1999 Standard for Exhaust Systems for Air Conveying of Vapors, Gases, Mists, and Noncombustible Particulate SolidsNFPA 76 Edition: P* Recommended Practice for the Fire Protection of Telecommunications FacilitiesNFPA 1992 Edition: 2000 Standard on Liquid Splash-Protective Ensembles and Clothing for Hazardous Materials EmergenciesNFPA 91 Edition: 1999 Standard for Exhaust Systems for Air Conveying of Vapors, Gases, Mists, and Noncombustible Particulate SolidsNFPA 15 Edition: 1996 Standard for Water Spray Fixed Systems for Fire ProtectionNFPA 11A Edition: 1999 Standard for Medium- and High-Expansion Foam SystemsNFPA 13 Edition: 1999 NFPA 13 Edition: 1999ANSI/NFPA 13A-1987 Inspection, Testing, and Maintenance of Sprinkler SystemsNFPA 14 Edition: 2000 Standard for the Installation of Standpipe, Private Hydrants, and Hose SystemsNFPA 14 Edition: 2000 Standard for the Installation of Standpipe, Private Hydrants, and Hose SystemsNFPA 12A Edition: 1997 Standard on Halon 1301 Fire Extinguishing SystemsNFPA 10 Edition: 1998 Standard for Portable Fire ExtinguishersNFPA 13 Edition: 1999 NFPA 13 Edition: 1999NFPA 68 Edition: 1998 Guide for Venting of DeflagrationsNFPA 33 Edition: 2000 Standard for Spray Application Using Flammable or Combustible MaterialsNFPA 96 Edition: 1998 Standard for Ventilation Control and Fire Protection of Commercial Cooking OperationsNFPA 91 Edition: 1999 Standard for Exhaust Systems for Air Conveying of Vapors, Gases, Mists, and Noncombustible Particulate SolidsNFPA 20 Edition: 1999 Standard for the Installation of Stationary Pumps for Fire ProtectionNFPA 91 Edition: 1999 Standard for Exhaust Systems for Air Conveying of Vapors, Gases, Mists, and Noncombustible Particulate SolidsNFPA 24 Edition: 1995 Standard for the Installation of Private Fire Service Mains and Their AppurtenancesNFPA 11 Edition: 1998 Standard for Low-Expansion FoamNFPA 11 Edition: 1998 Standard for Low-Expansion FoamNFPA 22 Edition: 1998 Standard for Water Tanks for Private Fire ProtectionNFPA 22 Edition: 1998 Standard for Water Tanks for Private Fire ProtectionNFPA 385 Edition: 2000 Standard for Tank Vehicles for Flammable and Combustible LiquidsNFPA 1971 Edition: 2000 Standard on Protective Ensemble For Structural Fire FightingANSI/NFPA 231C-1998 Rack Storage of MaterialsNFPA 69 Edition: 1997 Standard on Explosion Prevention SystemsNFPA 12 Edition: 2000 Standard on Carbon Dioxide Extinguishing SystemsNFPA 10 Edition: 1998 Standard for Portable Fire Extinguishers
OSHA
Page 22
NFPA 86 Edition: 1999 Standard for Ovens and FurnacesNFPA 11A Edition: 1999 Standard for Medium- and High-Expansion Foam SystemsNFPA 12 Edition: 2000 Standard on Carbon Dioxide Extinguishing SystemsNFPA 12A Edition: 1997 Standard on Halon 1301 Fire Extinguishing SystemsNFPA 18 Edition: 1995 Standard on Wetting AgentsNFPA 17 Edition: 1998 Standard for Dry Chemical Extinguishing SystemsNFPA 16 Edition: 1999 Standard for the Installation of Foam-Water Sprinkler and Foam-Water Spray SystemsNFPA 15 Edition: 1996 Standard for Water Spray Fixed Systems for Fire ProtectionANSI/NFPA 72-1999 Protective Signaling SystemsNFPA 34 Edition: 2000 Standard for Dipping and Coating Processes Using Flammable or Combustible LiquidsANSI/NFPA 231-1998, General StorageNFPA 22 Edition: 1998 Standard for Water Tanks for Private Fire ProtectionNFPA 101 Edition: 2000 Code for Safety to Life from Fire in Buildings and StructuresNFPA 1971 Edition: 2000 Standard on Protective Ensemble For Structural Fire FightingNFPA 203 Edition: 2000 Guide on Roof Coverings and Roof Deck ConstructionsNFPA 251 Edition: 1999 Standard Methods of Tests of Fire Endurance of Building Construction and MaterialsNFPA 30 Edition: 2000 Flammable and Combustible Liquids CodeNFPA 302 Edition: 1998 Fire Protection Standard for Pleasure and Commercial Motor CraftNFPA 32 Edition: 2000 Standard for Drycleaning PlantsNFPA 33 Edition: 2000 Standard for Spray Application Using Flammable or Combustible MaterialsNFPA 16 Edition: 1999 Standard for the Installation of Foam-Water Sprinkler and Foam-Water Spray SystemsNFPA 35 Edition: 1999 Standard for the Manufacture of Organic CoatingsNFPA 36 Edition: 2001 Standard for Solvent Extraction PlantsNFPA 37 Edition: 1998 Standard for the Installation and Use of Stationary Combustion Engines and Gas TurbinesNFPA 70 Edition: 1999 National Electrical CodeNFPA 17 Edition: 1998 Standard for Dry Chemical Extinguishing SystemsNFPA 1971 Edition: 2000 Standard on Protective Ensemble For Structural Fire FightingNFPA 20 Edition: 1999 Standard for the Installation of Stationary Pumps for Fire ProtectionNFPA 80 Edition: 1999 Standard for Fire Doors and Fire WindowsNFPA 80 Edition: 1999 Standard for Fire Doors and Fire WindowsNFPA 385 Edition: 2000 Standard for Tank Vehicles for Flammable and Combustible LiquidsNFPA 68 Edition: 1998 Guide for Venting of DeflagrationsNFPA 51B Edition: 1999 Standard for Fire Prevention During Welding, Cutting, and Other Hot WorkNFPA 496 Edition: 1998 Standard for Purged and Pressurized Enclosures for Electrical EquipmentNFPA 58 Edition: 2001 Liquefied Petroleum Gas CodeNFPA 59 Edition: 2001 Utility LP-Gas Plant CodeNFPA 20 Edition: 1999 Standard for the Installation of Stationary Pumps for Fire ProtectionANSI A10.14-1991 Construction and Demolition Operations - Requirements for Safety Belts, Harnesses,ANSI A10.14-1991 Construction and Demolition Operations - Requirements for Safety Belts, Harnesses,ANSI A10.8-2001 Safety Requirements for Scaffolding (new standard)ANSI A10.3-1995 Powder Actuated Fastening Systems, Safety Requirements forANSI A10.9-1997 Construction and Demolition Operations - Concrete and Masonry Work (revision of ANSI A10.9-1983)ANSI A10.9-1997 Construction and Demolition Operations - Concrete and Masonry Work (revision of ANSI A10.9-1983)ANSI A10.5-1992 Safety Requirements for Material HoistsANSI A10.3-1995 Powder Actuated Fastening Systems, Safety Requirements forANSI A10.9-1997 Construction and Demolition Operations - Concrete and Masonry Work (revision of ANSI A10.9-1983)ANSI Z41-1999 Personal Protection - Protective FootwearANSI Z41-1999 Personal Protection - Protective FootwearANSI Z41-1999 Personal Protection - Protective FootwearANSI Z41-1999 Personal Protection - Protective Footwear
OSHA
Page 23
ANSI Z41-1999 Personal Protection - Protective FootwearANSI Z41-1999 Personal Protection - Protective FootwearANSI Z41-1999 Personal Protection - Protective FootwearANSI Z41-1999 Personal Protection - Protective FootwearANSI Z41-1999 Personal Protection - Protective FootwearANSI Z41-1999 Personal Protection - Protective FootwearANSI Z41-1999 Personal Protection - Protective FootwearANSI Z41-1999 Personal Protection - Protective FootwearANSI Z41-1999 Personal Protection - Protective FootwearANSI Z41-1999 Personal Protection - Protective FootwearANSI/OPEI B71.1-1998 Consumer Turf Care Equipment - Walk-Behind Mowers and Ride-On Machines with Mowers - Safety SpecificationsANSI/OPEI B71.1-1998 Consumer Turf Care Equipment - Walk-Behind Mowers and Ride-On Machines with Mowers - Safety SpecificationsANSI B175.1-2000 Gasoline Powered Chain Saws, Safety Requirements forANSI B175.1-2000 Gasoline Powered Chain Saws, Safety Requirements forANSI Z4.1-1986 (R1995) Sanitation in Places of Employment, Minimum Requirements forANSI/RMA IP-14-1986 Anhydrous Ammonia Hose, Specifications forSAE-J386-1997 OPERATOR RESTRAINT SYSTEMS FOR OFF-ROAD WORK MACHINESSAE-J1040-1994 PERFORMANCE CRITERIA FOR ROLLOVER PROTECTIVE STRUCTURES (ROPS) FOR CONSTRUCTION, EARTHMOVISAE-J231 OBJECT, FALLING, PROTECTIVE STRUCTURE (FOPS), MINIMUM PERFORMANCE CRITERIA FORSAE-J397-1995 DEFLECTION LIMITING VOLUME - PROTECTIVE STRUCTURES LABORATORY EVALUATIONSAE-J394 MINIMUM PERFORMANCE CRITERIA FOR ROLLOVER PROTECTIVE STRUCTURESSAE-J231 OBJECT, FALLING, PROTECTIVE STRUCTURE (FOPS), MINIMUM PERFORMANCE CRITERIA FORSAE-J185-1988 ACCESS SYSTEMS FOR OFF ROAD MACHINESSAE-J397-1995 DEFLECTION LIMITING VOLUME - PROTECTIVE STRUCTURES LABORATORY EVALUATIONSAE-J1040-1994 PERFORMANCE CRITERIA FOR ROLLOVER PROTECTIVE STRUCTURES (ROPS) FOR CONSTRUCTION, EARTHMOVISAE-J959-1991 LIFTING CRANE, WIRE-ROPE STRENGTH FACTORSSAE-J334 Protective Frame for Agricultural Tractors~Test Procedures and performance RequirementsSAE-J168-1978 Protective Enclosures for Agricultural Tractors~Test procedures and performance RequirementSAE-J321-1999 TIRE GUARDS FOR OPERATOR PROTECTION - EARTHMOVING HAULAGE MACHINESSAE-J166-1971 Minimum Performance Criteria for Brake Systems for off-Highway Trucks and WagonsSAE-J237-1971SAE-J386-1997 OPERATOR RESTRAINT SYSTEMS FOR OFF-ROAD WORK MACHINESSAE-J395 CRAWLER TRACTORS, MINIMUM PERFORMANCE REQUIRMENTS FOR ROLLOVERSAE-J319SAE-J765-1990 CRANE LOAD STABILITY TEST CODESAE-J236-1971 Minimum Performance Criteria for Brake Systems for Rubber tired, self- Propelled GradersSAE J743-1992 Lift Capacity Calculation and Test Procedure~Pipelayer and sideboomSAE-J320 Minimum Performance Criteria for Roll-Over Protective System for rubber- Tired, Self-Propelled ScrapersSAE-J396 MOTORGRADERS, MINIMUM PERFORMANCE CRITERIA FOR ROLLOVER PROTECTIVESAE-J397-1995 DEFLECTION LIMITING VOLUME - PROTECTIVE STRUCTURES LABORATORY EVALUATIONSAE-J333 OPERATOR PROTECTION FOR WHEEL TYPE AGRICULTURAL TRACTORSSAE-J167-1992 OVERHEAD PROTECTION FOR AGRICULTURAL TRACTORS-TEST PROCEDURES & PERFORMANCE REQUIREMENTSSIA 92ANSI/SIA A92.2-1990 Vehicle Mounted Elevating and Rotating Aerial DevicesANSI/SIA A92.3-1990 Manually Propelled Elevating Work PlatformsANSI/SIA A92.2-1990 Vehicle Mounted Elevating and Rotating Aerial DevicesANSI/SIA A92.6-1999 Self-Propelled Elevating Work PlatformsANSI/SIA A92.2-1990 Vehicle Mounted Elevating and Rotating Aerial DevicesANSI/SIA A92.7-1990 Airline Ground Support Vehicle-Mounted Vertical Lift DevicesANSI/SIA A92.5-1992 Boom-Supported Elevating Work Platforms (revision and redesignation of ANSI A92.5-1980)
Loaders and Dozers
Scrapers
OSHA
Page 24
ANSI/SIA A92.6-1999 Self-Propelled Elevating Work PlatformsANSI/SIA A92.2-1990 Vehicle Mounted Elevating and Rotating Aerial DevicesANSI/SIA A92.9-1993 Mast-Climbing Work PlatformsANSI/SIA A92.2-1990 Vehicle Mounted Elevating and Rotating Aerial DevicesANSI/SIA A92.2-1990 Vehicle Mounted Elevating and Rotating Aerial DevicesANSI/SIA A92.8-1993 Vehicle-Mounted Bridge Inspection and Maintenance DevicesANSI/SIA A92.5-1992 Boom-Supported Elevating Work Platforms (revision and redesignation of ANSI A92.5-1980)ANSI B7.1-2000 The Use, Care, and Protection of Abrasive WheelsANSI B7.1-2000 The Use, Care, and Protection of Abrasive WheelsANSI B7.1-2000 The Use, Care, and Protection of Abrasive WheelsANSI B7.1-2000 The Use, Care, and Protection of Abrasive WheelsUL 142 Steel Aboveground Tanks for Flammable and Combustible LiquidsUL 58 Steel Underground Tanks for Flammable and Combustible LiquidsUL 80-2000 Steel Inside Tanks for Oil-Burner FuelANSI O1.1-1992 Woodworking Machinery - Safety Requirements
