Standards publishedISO 50003:2014 * Energy management systems — Requirements for bodies providing audit and certification of energy management systems C TC 261 Additive manufacturing

Standards published New International Standards published between 01 October and 31 October 2014

* Available in English only

** French version of standard previously published in English only

Price group

PC 259 Outsourcing

ISO 37500:2014 * Guidance on outsourcing G

TC 8 Ships and marine technology

ISO 17325-2:2014 * Ships and marine technology — Marine environment protection — Oil booms — Part 2: Strength and performance requirements

A

ISO 18309:2014 * Ships and marine technology — Incinerator sizing and selection — Guidelines B

ISO 17907:2014 * Ships and marine technology — Single point mooring arrangements for conventional tankers

C

ISO 18289:2014 * Ships and marine technology — Navigation and shallow-water engineering vessels — Anchor winches

B

ISO 18296:2014 * Ships and marine technology — Ship-shifting winches B

ISO 16556:2014 * Large yachts — Deck equipment — Anchoring equipments B

TC 17 Steel

ISO 683-17:2014 Heat-treated steels, alloy steels and free-cutting steels — Part 17: Ball and roller bearing steels

D

TC 20 Aircraft and space vehicles

ISO 27027:2014 * Aerospace — Solid-state remote power controllers — General performance requirements

D

ISO 16919:2014 * Space data and information transfer systems — Requirements for bodies providing audit and certification of candidate trustworthy digital repositories

D

TC 22 Road vehicles

ISO 15007-1:2014 Road vehicles — Measurement of driver visual behaviour with respect to transport information and control systems — Part 1: Definitions and parameters

C

TC 23 Tractors and machinery for agriculture and forestry

ISO 11783-3:2014 Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 3: Data link layer

G

TC 28 Petroleum products and lubricants

ISO 10370:2014 * Petroleum products — Determination of carbon residue — Micro method B

ISO 17315:2014 * Petroleum products and other liquids — Ethanol — Determination of total acidity B

by potentiometric titration

TC 29 Small tools

ISO 26623-1:2014 Polygonal taper interface with flange contact surface — Part 1: Dimensions and designation of shanks

B

ISO 26623-2:2014 Polygonal taper interface with flange contact surface — Part 2: Dimensions and designation of receivers

A

TC 31 Tyres, rims and valves

ISO 14960-1:2014 Tubeless tyres — Valves and components — Part 1: Test methods B

ISO 14960-2:2014 Tubeless tyres — Valves and components — Part 2: Clamp-in tubeless tyre valve-test method

B

TC 34 Food products

ISO 11133:2014 * Microbiology of food, animal feed and water — Preparation, production, storage and performance testing of culture media

H

ISO 22004:2014 Food safety management systems — Guidance on the application of ISO 22000 E

ISO 2451:2014 * Cocoa beans — Specification B

TC 35 Paints and varnishes

ISO 4618:2014 * Paints and varnishes — Terms and definitions A

ISO 16474-3:2013 Paints and varnishes — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps

C

TC 36 Cinematography

ISO 71:2014 * Cinematography — 16 mm negative photographic sound record on 16 mm, 35/16 mm and 35/32 mm motion-picture film — Positions and dimensions

A

ISO 7832:2014 * Cinematography — Photoelectric output factor of photographic-type audio-level test films — Measurement and calibration

B

TC 37 Terminology and other language and content resources

ISO 24156-1:2014 * Graphic notations for concept modelling in terminology work and its relationship with UML — Part 1: Guidelines for using UML notation in terminology work

D

TC 39 Machine tools

ISO/TR 17529:2014 * Machine tools — Practical guidance and example of risk assessment on electro-discharge machines

D

TC 45 Rubber and rubber products

ISO 815-1:2014 Rubber, vulcanized or thermoplastic — Determination of compression set — Part 1: At ambient or elevated temperatures

C

ISO 1656:2014 * Rubber, raw natural, and rubber latex, natural — Determination of nitrogen content D

ISO 2302:2014 * Isobutene-isoprene rubber (IIR) — Evaluation procedure B

TC 46 Information and documentation

ISO 10161-2:2014 * Information and documentation — Open Systems Interconnection — Interlibrary Loan Application Protocol Specification — Part 2: Protocol implementation conformance statement (PICS) proforma

E

ISO 21127:2014 Information and documentation — A reference ontology for the interchange of cultural heritage information

H

ISO/TR 26122:2008 Information and documentation — Work process analysis for records C

TC 51 Pallets for unit load method of materials handling

ISO 18613:2014 Pallets for materials handling — Repair of flat wooden pallets C

TC 58 Gas cylinders

ISO 3807:2013 Gas cylinders — Acetylene cylinders — Basic requirements and type testing E

ISO 10297:2014 Gas cylinders — Cylinder valves — Specification and type testing F

TC 60 Gears

ISO/TR 15144-2:2014

* Calculation of micro-pitting load capacity of cylindrical spur and helical gears — Part 2: Examples of calculation for micropitting

F

TC 61 Plastics

ISO 17855-1:2014 Plastics — Polyethylene (PE) moulding and extrusion materials — Part 1: Designation system and basis for specifications

B

TC 67 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries

ISO 21809-2:2014 Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 2: Single layer fusion-bonded epoxy coatings

F

TC 69 Applications of statistical methods

ISO 22514-8:2014 Statistical methods in process management — Capability and performance — Part 8: Machine performance of a multi-state production process

F

TC 83 Sports and other recreational facilities and equipment

ISO 9462:2014 Alpine ski-bindings — Requirements and test methods E

ISO 13992:2014 Alpine touring ski-bindings — Requirements and test methods F

TC 84 Devices for administration of medicinal products and catheters

ISO 11070:2014 Sterile single-use intravascular introducers, dilators and guidewires D

TC 87 Cork

ISO 7322:2014 Composition cork — Test methods A

TC 94 Personal safety -- Protective clothing and equipment

ISO 16900-1:2014 Respiratory protective devices — Methods of test and test equipment — Part 1: Determination of inward leakage

E

TC 96 Cranes

ISO 9928-2:2014 * Cranes — Crane operating manual — Part 2: Mobile cranes A

ISO 11662-2:2014 * Mobile cranes — Experimental determination of crane performance — Part 2: Structural competence under static loading

F

TC 106 Dentistry

ISO 13116:2014 Dentistry — Test Method for Determining Radio-Opacity of Materials B

ISO 9680:2014 Dentistry — Operating lights C

ISO 17730:2014 Dentistry — Fluoride varnishes A

TC 110 Industrial trucks

ISO 22915-9:2014 Industrial trucks — Verification of stability — Part 9: Counterbalanced trucks with mast handling freight containers of 6 m (20 ft) length and longer

B

TC 114 Horology

ISO 10552:2014 Timekeeping instruments — Crowns and sealed tubes — Designs and dimensions B

TC 121 Anaesthetic and respiratory equipment

ISO 5367:2014 Anaesthetic and respiratory equipment — Breathing sets and connectors E

ISO 8836:2014 Suction catheters for use in the respiratory tract E

TC 126 Tobacco and tobacco products

ISO 10315:2013 Cigarettes — Determination of nicotine in smoke condensates — Gas-chromatographic method

C

ISO/TR 19478-1:2014

* ISO and Health Canada intense smoking parameters — Part 1: Results of an international machine smoking study

G

TC 131 Fluid power systems

ISO 6358-3:2014 Pneumatic fluid power — Determination of flow-rate characteristics of components using compressible fluids — Part 3: Method for calculating steady-state flow-rate characteristics of systems

G

TC 145 Graphical symbols

ISO 9186-3:2014 Graphical symbols — Test methods — Part 3: Method for testing symbol referent association

C

TC 149 Cycles

ISO 4210-4:2014 * Cycles — Safety requirements for bicycles — Part 4: Braking test methods E

ISO 4210-6:2014 * Cycles — Safety requirements for bicycles — Part 6: Frame and fork test methods D

ISO 4210-8:2014 * Cycles — Safety requirements for bicycles — Part 8: Pedal and drive system test methods

B

TC 150 Implants for surgery

ISO 14242-1:2014 Implants for surgery — Wear of total hip-joint prostheses — Part 1: Loading and displacement parameters for wear-testing machines and corresponding environmental conditions for test

B

ISO 14243-3:2014 Implants for surgery — Wear of total knee-joint prostheses — Part 3: Loading and displacement parameters for wear-testing machines with displacement control and corresponding environmental conditions for test

C

TC 164 Mechanical testing of metals

ISO 16842:2014 Metallic materials — Sheet and strip — Biaxial tensile testing method using a cruciform test piece

D

TC 168 Prosthetics and orthotics

ISO 8549-4:2014 Prosthetics and orthotics — Vocabulary — Part 4: Terms relating to limb amputation

A

TC 172 Optics and photonics

ISO 9022-4:2014 * Optics and photonics — Environmental test methods — Part 4: Salt mist B

ISO 17328:2014 Optics and photonics — Optical materials and components — Test method for refractive index of infrared optical materials

C

ISO 14490-6:2014 * Optics and photonics — Test methods for telescopic systems — Part 6: Test methods for veiling glare index

B

TC 173 Assistive products for persons with disability

ISO 7176-1:2014 Wheelchairs — Part 1: Determination of static stability E

ISO 17069:2014 * Accessible design — Consideration and assistive products for accessible meeting C

TC 174 Jewellery

ISO 11427:2014 Jewellery — Determination of silver in silver jewellery alloys — Volumetric (potentiometric) method using potassium bromide

A

TC 181 Safety of toys

ISO 8124-4:2014 * Safety of toys — Part 4: Swings, slides and similar activity toys for indoor and outdoor family domestic use

G

TC 183 Copper, lead, zinc and nickel ores and concentrates

ISO 13547-1:2014 * Copper, lead, zinc and nickel sulfide concentrates — Determination of arsenic — Part 1: Iron hydroxide concentration and inductively coupled plasma atomic emission spectrometric method

C

TC 184 Automation systems and integration

ISO 22400-1:2014 * Automation systems and integration — Key performance indicators (KPIs) for manufacturing operations management — Part 1: Overview, concepts and terminology

D

TC 190 Soil quality

ISO 11268-3:2014 * Soil quality — Effects of pollutants on earthworms — Part 3: Guidance on the determination of effects in field situations

C

TC 198 Sterilization of health care products

ISO 11140-1:2014 Sterilization of health care products — Chemical indicators — Part 1: General requirements

E

TC 202 Microbeam analysis

ISO 14594:2014 * Microbeam analysis — Electron probe microanalysis — Guidelines for the determination of experimental parameters for wavelength dispersive spectroscopy

C

ISO 14595:2014 * Microbeam analysis — Electron probe microanalysis — Guidelines for the specification of certified reference materials (CRMs)

C

TC 204 Intelligent transport systems

ISO/TS 16785:2014 * Electronic Fee Collection (EFC) — Interface definition between DSRC-OBE and external in-vehicle devices

E

ISO/TR 17465-1:2014

* Intelligent transport systems — Cooperative ITS — Part 1: Terms and definitions B

ISO 29281-2:2013/Amd 1:2014

* Intelligent transport systems — Communication access for land mobiles (CALM) — Non-IP networking — Part 2: Legacy system support — Amendment 1

XZ

TC 215 Health informatics

ISO/TR 14639-2:2014

* Health informatics — Capacity-based eHealth architecture roadmap — Part 2: Architectural components and maturity model

H

TC 217 Cosmetics

ISO 15819:2014 Cosmetics — Analytical methods — Nitrosamines: Detection and determination of N-nitrosodiethanolamine (NDELA) in cosmetics by HPLC-MS-MS

B

TC 218 Timber

ISO 13061-1:2014 * Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 1: Determination of moisture content for physical and mechanical tests

A

ISO 13061-2:2014 * Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 2: Determination of density for physical and mechanical tests

A

TC 223 Societal security

ISO 22300:2012 Societal security — Terminology B

TC 228 Tourism and related services

ISO 13687:2014 * Tourism and related services — Yacht harbours — Minimum requirements B

TC 242 Energy Management

ISO 50003:2014 * Energy management systems — Requirements for bodies providing audit and certification of energy management systems

C

TC 261 Additive manufacturing

ISO 17296-3:2014 Additive manufacturing — General principles — Part 3: Main characteristics and corresponding test methods

C

ISO 17296-4:2014 Additive manufacturing — General principles — Part 4: Overview of data processing

B

CASCO Committee on conformity assessment

ISO/IEC TS 17021-7:2014

* Conformity assessment — Requirements for bodies providing audit and certification of management systems — Part 7: Competence requirements for auditing and certification of road traffic safety management systems

A

JTC 1 Information technology

ISO/IEC 8824-3:2008/Cor 1:2014

* Information technology — Abstract Syntax Notation One (ASN.1): Constraint specification — Part 3: — Technical Corrigendum 1

free

ISO/IEC 10373-5:2014

* Identification cards — Test methods — Part 5: Optical memory cards C

ISO/IEC 11694-5:2014

* Identification cards — Optical memory cards — Linear recording method — Part 5: Data format for information interchange for applications using ISO/IEC 11694-4

C

ISO/IEC TR 11801-9901:2014

* Information technology — Generic cabling for customer premises — Part 9901: Guidance for balanced cabling in support of at least 40 Gbit/s data transmission

F

ISO/IEC 24775-1:2014

* Information technology — Storage management — Part 1: Overview D

ISO/IEC 24775-2:2014

* Information technology — Storage management — Part 2: Common Architecture H

ISO/IEC 24775-3:2014

* Information technology — Storage management — Part 3: Common Profiles H

ISO/IEC 24775-4:2014

* Information technology — Storage management — Part 4: Block Devices H

ISO/IEC 27000:2014

Information technology — Security techniques — Information security management systems — Overview and vocabulary

E

ISO/IEC 14496-18:2004/Amd 1:2014

* Information technology — Coding of audio-visual objects — Part 18: Font compression and streaming — Amendment 1: Updated semantics of decoderSpecificInfo and font data description for ISOBMFF

XZ

ISO/IEC 17788:2014

* Information technology — Cloud computing — Overview and vocabulary B

ISO/IEC 17789:2014

* Information technology — Cloud computing — Reference architecture G

Standards confirmed The following International Standards are confimred for a five year period:

TC 2 Fasteners

ISO 8752:2009

ISO 10669:1999 (reconfirmed)

ISO 13337:2009

ISO 7721-2:1990 (reconfirmed)

ISO 10644:2009

ISO 10673:2009

TC 6 Paper, board and pulps

ISO 8254-1:2009

TC 8 Ships and marine technology

ISO 28000:2007



TC 17 Steel

ISO 9444-1:2009

ISO 9444-2:2009

TC 20 Aircraft and space vehicles



TC 28 Petroleum products and lubricants


TC 29 Small tools








TC 34 Food products

ISO 660:2009

ISO 16931:2009

ISO 22959:2009

TC 38 Textiles

ISO 105-B07:2009

ISO 105-F02:2009

ISO 105-F09:2009

ISO 105-G02:1993 (reconfirmed)

TC 44 Welding and allied processes

ISO 2560:2009






ISO 15609-4:2009



ISO 17663:2009



TC 61 Plastics


ISO 6721-12:2009


ISO 25217:2009

ISO 25762:2009








































ISO 21627-1:2009

ISO 21627-2:2009

ISO 21627-3:2009

ISO 527-5:2009

ISO 1889:2009

ISO 1890:2009



TC 63 Glass containers












TC 67 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries

ISO 23936-1:2009



ISO 17078-3:2009

ISO 17824:2009

TC 69 Applications of statistical methods






TC 87 Cork


TC 89 Wood-based panels










TC 92 Fire safety

ISO 5658-2:2006

TC 96 Cranes

ISO 4301-2:2009


TC 108 Mechanical vibration, shock and condition monitoring




ISO 22266-1:2009





TC 112 Vacuum technology


TC 113 Hydrometry



TC 127 Earth-moving machinery

ISO 10263-1:2009

ISO 10263-2:2009

ISO 10263-3:2009

ISO 10263-4:2009

ISO 10263-5:2009

ISO 10263-6:2009


TC 135 Non-destructive testing







TC 138 Plastics pipes, fittings and valves for the transport of fluids


TC 146 Air quality




TC 153 Valves






TC 173 Assistive products for persons with disability

ISO 7176-21:2009

ISO 16840-4:2009

TC 178 Lifts, escalators and moving walks

ISO 7465:2007

ISO 14798:2009

TC 188 Small craft


ISO 10862:2009

TC 193 Natural gas






TC 209 Cleanrooms and associated controlled environments

ISO 14698-1:2003

ISO 14698-2:2003

TC 213 Dimensional and geometrical product specifications and verification





TC 216 Footwear


TC 226 Materials for the production of primary aluminium




TC 227 Springs

ISO 26909:2009

ISO 26910-1:2009

TC 228 Tourism and related services

ISO 11107:2009

ISO 11121:2009


ISO/IEC 29341-2:2008

ISO/IEC 29341-3-2:2008

ISO/IEC 29341-3-3:2008

ISO/IEC 29341-3-11:2008

ISO/IEC 29341-3-12:2008

ISO/IEC 29341-3-13:2008

ISO/IEC 29341-4-12:2008

ISO/IEC 14443-4:2008

ISO/IEC 15693-3:2009

Standards withdrawn Period from 01 October to 31 October 2014

TC 31 Tyres, rims and valves

ISO 14960:2004 (replaced by ISO 14960-1:2014)

TC 61 Plastics

ISO 1872-1:1993 (replaced by ISO 17855-1:2014)

TC 110 Industrial trucks


TC 127 Earth-moving machinery

ISO/TS 20474-14:2008 (replaced by )

TC 131 Fluid power systems

ISO 6358:1989 (replaced by ISO 6358-1:2013, ISO 6358-2:2013, ISO 6358-3:2014)

TC 218 Timber


Meeting calendar (update at 01 October 2014)

Meetings called for the month of September are not in this edition.

* Information definite but meeting not yet formally convened

** Provisional

September-November 2014

4-4 Beijing (China) TC 83 Sports and other recreational facilities and equipment

November 2014

2-7 Belfort (France) TC 184/SC 4 Automation systems and integration/Industrial data

3-4 Tel Aviv (Israel) TC 282/SC 1 Water re-use/Treated wastewater re-use for Irrigation

3-5 Madrid (Spain) PC 252 Natural gas fuelling stations for vehicles

3-5 Washington, D.C (USA)

TC 241 Road traffic safety management systems

3-7 Singapore (Singapore)

PC 277 Sustainable procurement

3-7 Cape Town (South Africa)

TC 45 Rubber and rubber products


TC 45/SC 1 Rubber and rubber products/Rubber and plastics hoses and hose assemblies


TC 45/SC 2 Rubber and rubber products/Testing and analysis

3-7 Wuhan (China) TC 183 Copper, lead, zinc and nickel ores and concentrates

3-7 New Delhi (India) TC 229 Nanotechnologies

3-7 Lisbon (Portugal) TC 282 Water re-use

5-6 Lisbon (Portugal) TC 34/SC 4 Food products/Cereals and pulses

5-6 Tel Aviv (Israel) TC 282/SC 3 Water re-use/Risk and performance evaluation of water re-use systems

6 Cape Town (South Africa)

TC 45/SC 4 Rubber and rubber products/Products (other than hoses)

6 Istanbul (Turkey) TC 270 Plastics and rubber machines

6 Lisbon (Portugal) TC 282/SC 2 Water re-use/Water re-use in urban areas

7 San Diego (USA) TC 22/SC 10 Road vehicles/Impact test procedures

7 San Diego (USA) TC 22/SC 12 Road vehicles/Passive safety crash protection systems


TC 45/SC 3 Rubber and rubber products/Raw materials (including latex) for use in the rubber industry

10-11

Edinburgh (United Kingdom)

TC 171/SC 2 Document management applications/Application issues

11-14

Ottawa (Canada) TC 244 Industrial furnaces and associated processing equipment

12 LEMONT (USA) TC 22/SC 3 Road vehicles/Electrical and electronic equipment

13-14

Berlin (Germany) TC 182/SC 1 Geotechnics/Geotechnical investigation and testing

14-20

Beijing (China) TC 130 Graphic technology

15-20

Abu Dhabi (United Arab Emirates)


17-21

St. Augustine, Florida (USA)

TC 108/SC 2 Mechanical vibration, shock and condition monitoring/Measurement and evaluation of mechanical vibration and shock as applied to machines, vehicles and structures

18-20

Madrid (Spain) TC 34/SC 7 Food products/Spices, culinary herbs and condiments

19 Geneva (Switzerland)

CSC/FIN Council/Council Standing Committee on Finance (CSC/FIN)

19 Trondheim (Norway) TC 234 Fisheries and aquaculture

19-21

Delft (Netherlands) TC 23/SC 13 Tractors and machinery for agriculture and forestry/Powered lawn and garden equipment

24-25

Geneva (Switzerland)

CSC/SPC Council/Strategy and Policy Committee (CSC/SPC)

24-28

Paris (France) PC 287 Chain of custody of wood and wood-based products

25-26

Shenzen (China) TC 211 Geographic information/Geomatics

26-28

Frankfurt (Germany) TC 184/SC 1 Automation systems and integration/Physical device control

28 London (United Kingdom)

TC 158 Analysis of gases

December 2014

1-4 Copenhagen (Denmark)

TC 98 Bases for design of structures

1-5 Dublin (Ireland) TC 260 Human resource management

3-5 Tokyo (Japan) TC 232 Learning services outside formal education

3-5 Paris (France) TC 269 Railway applications

4-5 Fukuoka (Japan) TC 197 Hydrogen technologies

5 Berlin (Germany) TC 44/SC 6 Welding and allied processes/Resistance welding and allied mechanical joining

8-10

London (United Kingdom)

TC 147/SC 3 Water quality/Radioactivity measurements

9-12

Madrid (Spain) PC 273 Customer contact centres

17 Frankfurt (Germany) TC 291 Domestic gas cooking appliances


TC 98/SC 2 Bases for design of structures/Reliability of structures


TC 98/SC 3 Bases for design of structures/Loads, forces and other actions

January 2015

12-16

Weinheim (Germany) TC 69/SC 4 Applications of statistical methods/Applications of statistical methods in process management

19-20

Toledo (Spain) JTC 1/SC 37 Information technology/Biometrics

19-23

Copenhagen (Denmark)

* JTC 1/SC 35 Information technology/User interfaces

22-23

Cape Town (South Africa)

TC 44/SC 8 Welding and allied processes/Equipment for gas welding, cutting and allied processes

25-29

Foshan (China) TC 107 Metallic and other inorganic coatings

25-29

Foshan (China) * TC 107/SC 3 Metallic and other inorganic coatings/Electrodeposited coatings and related finishes

25-29

Foshan (China) * TC 107/SC 8 Metallic and other inorganic coatings/Chemical conversion coatings

26-27

Paris (France) TC 166 Ceramic ware, glassware and glass ceramic ware in contact with food

28 Berlin (Germany) TC 207/SC 3 Environmental management/Environmental labelling

February 2015

2-5 Beijing (China) TC 257 Evaluation of energy savings

3-13


* TC 213 Dimensional and geometrical product specifications and verification

9-13

Fairfax (USA) TC 58/SC 4 Gas cylinders/Operational requirements for gas cylinders


* CSC/SPC Council/Strategy and Policy Committee (CSC/SPC)

11 St. Petersburg, Florida (USA)

TC 115 Pumps

12-13


President's committee


22-23

Miami (USA) TMB Technical Management Board

March 2015

3 Virtual (Unknown) CSC/FIN Council/Council Standing Committee on Finance (CSC/FIN)

9-13


TC 110/SC 4 Industrial trucks/Rough-terrain trucks

12 West Conshohocken (Philadelphia) (USA)

TC 221 Geosynthetics

15 Caparica (Portugal) * TC 48 Laboratory equipment




16-18


COUNCIL Council

23-27

Vienna (Austria) * JTC 1/SC 38 Information technology/Distributed application platforms and services (DAPS)

23-27

Paris (France) * PC 278 Anti-bribery management systems

Rio de Janeiro (Brazil)

** PC 287 Chain of custody of wood and wood-based products

March-June 2015

25-26

Nara (Japan) * TC 184 Automation systems and integration

March-April 2015

31-2

Montreal (Canada) * TC 20/SC 9 Aircraft and space vehicles/Air cargo and ground equipment

1st Quarter 2015

(United Kingdom) ** PC 284 Management system for private security operations - Requirements with guidance

Paris (France) * TC 24/SC 4 Particle characterization including sieving/Particle characterization

Foshan (China) ** TC 107/SC 4 Metallic and other inorganic coatings/Hot dip coatings (galvanized, etc.)

Foshan (China) ** TC 107/SC 7 Metallic and other inorganic coatings/Corrosion tests

April 2015


* TC 92/SC 1 Fire safety/Fire initiation and growth

13-14

Lyon (France) TC 117 Fans

13-17

Tienjin (China) ** TC 161 Control and protective devices for gas and/or oil burners and appliances

13-17

(Czech Republic) ** TC 224 Service activities relating to drinking water supply systems and wastewater systems - Quality criteria of the service and performance indicators

19-24

Vico Equense (Italy) * TC 184/SC 4 Automation systems and integration/Industrial data

20-22

Zurich (Switzerland) * TC 126 Tobacco and tobacco products

20-22

Zurich (Switzerland) * TC 126/SC 1 Tobacco and tobacco products/Physical and dimensional tests

20-22

Zurich (Switzerland) * TC 126/SC 2 Tobacco and tobacco products/Leaf tobacco

20-24

San Francisco (USA) * TC 215 Health informatics

21 Beijing (China) ** TC 274 Light and lighting

21-22

Düsseldorf (Germany)

* TC 44/SC 10 Welding and allied processes/Unification of requirements in the field of metal welding

21-22

(Kazakhstan) ** TC 67/SC 2 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Pipeline transportation systems

22-24

General Roca (Argentina)

* TC 34/SC 12 Food products/Sensory analysis

23 Düsseldorf (Germany)

* TC 44/SC 11 Welding and allied processes/Qualification requirements for welding and allied processes personnel

24 Atlanta (USA) ** TC 6/SC 2 Paper, board and pulps/Test methods and quality specifications for paper and board

25 Atlanta (USA) ** TC 6 Paper, board and pulps

(France) ** TC 29 Small tools

(France) ** TC 29/SC 9 Small tools/Tools with defined cutting edges, cutting items

(USA) ** TC 34/SC 15 Food products/Coffee

May 2015

1-7 (United Kingdom) ** TC 67/SC 4 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Drilling and production equipment

4-7 Toronto (Canada) * TC 68 Financial services

4-8 Kuching (Malaysia) ** JTC 1/SC 27 Information technology/IT Security techniques

4-8 (Unknown) ** TC 36 Cinematography

8-15

Tokyo (Japan) ** TC 10 Technical product documentation

11-12

Kuching (Malaysia) * JTC 1/SC 27 Information technology/IT Security techniques

11-15

Ohio (USA) ** TC 184/SC 5 Automation systems and integration/Interoperability, integration, and architectures for enterprise systems and automation applications

11-16

Bologna (Italy) ** TC 130 Graphic technology

12-15


** TC 156 Corrosion of metals and alloys

13 Paris (France) ** TC 87 Cork

18-22

(Brazil) ** JTC 1/SC 40 Information technology/IT Service Management and IT Governance

18-22


** TC 4 Rolling bearings

18-22

Chengdu (China) ** TC 39/SC 2 Machine tools/Test conditions for metal cutting machine tools

18-22

Luzern (Switzerland) * TC 114 Horology


* TC 228 Tourism and related services

25-29

Madrid (Spain) ** TC 23/SC 18 Tractors and machinery for agriculture and forestry/Irrigation and drainage equipment and systems

26-29

(Argentina) ** TC 85/SC 5 Nuclear energy, nuclear technologies, and radiological protection/Nuclear fuel cycle


** TC 67/SC 5 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Casing, tubing and drill pipe

Glasgow, Scotland (United Kingdom)

** JTC 1/SC 32 Information technology/Data management and interchange

(USA) ** PC 272 Forensic sciences

8-15

Tokyo (Japan) ** TC 10/SC 1 Technical product documentation/Basic conventions

8-15

Tokyo (Japan) ** TC 10/SC 6 Technical product documentation/Mechanical engineering documentation

8-15

Tokyo (Japan) ** TC 10/SC 10 Technical product documentation/Process plant documentation

Tokyo (Japan) ** TC 113 Hydrometry

Tokyo (Japan) ** TC 113/SC 1 Hydrometry/Velocity area methods

Tokyo (Japan) ** TC 113/SC 2 Hydrometry/Flow measurement structures

Tokyo (Japan) ** TC 113/SC 5 Hydrometry/Instruments, equipment and data management

Tokyo (Japan) ** TC 113/SC 6 Hydrometry/Sediment transport

Tokyo (Japan) ** TC 113/SC 8 Hydrometry/Ground water


** TC 131/SC 6 Fluid power systems/Contamination control

June 2015

1-5 Sapporo (Japan) ** TC 42 Photography

1-5 Seattle (USA) * TC 43/SC 3 Acoustics/Underwater acoustics

1-6 Philadelphia (USA) ** TC 147 Water quality

3-5 (Japan) ** TC 145 Graphical symbols

8-12

Berlin (Germany) ** TC 121 Anaesthetic and respiratory equipment

9-12

Pretoria (South Africa)

** REMCO Committee on reference materials

10-11

(France) ** TC 17/SC 9 Steel/Tinplate and blackplate

15-19

Vancouver (Canada) ** TC 22/SC 13 Road vehicles/Ergonomics applicable to road vehicles

17-18


* TMB Technical Management Board

18-19

Frankfurt (Germany) * TC 184/SC 2 Automation systems and integration/Robots and robotic devices

21-26

Matsue (Japan) ** TC 37 Terminology and other language and content resources

22-25

Avignon (France) * TC 54 Essential oils

22-26

(Netherlands) ** TC 34/SC 9 Food products/Microbiology

22- (China) ** TC 69 Applications of statistical methods

26

22-26

Göteborg (Sweden) * TC 188 Small craft

30 Virtual (Unknown) * President's committee


Matsue (Japan) ** JTC 1/SC 28 Information technology/Office equipment

(Australia) ** JTC 1/SC 36 Information technology/Information technology for learning, education and training

Zurich (Switzerland) ** TC 17/SC 17 Steel/Steel wire rod and wire products

(Europe) ** TC 34/SC 18 Food products/Cocoa

Beijing (China) ** TC 46 Information and documentation

Mexico City (Mexico) ** TC 242 Energy Management

(Unknown) ** TC 268/SC 1 Sustainable development in communities/Smart community infrastructures

June-July 2015

30-3

(Cyprus) ** TC 193 Natural gas

30-3

(Cyprus) ** TC 193/SC 3 Natural gas/Upstream area

2nd Quarter 2015

(Europe) ** TC 94/SC 13 Personal safety -- Protective clothing and equipment/Protective clothing

Istanbul (Turkey) ** TC 120 Leather

(China) ** TC 172/SC 7 Optics and photonics/Ophthalmic optics and instruments

1st Semester 2015


** TC 8/SC 8 Ships and marine technology/Ship design

(USA) ** TC 31/SC 9 Tyres, rims and valves/Valves for tube and tubeless tyres

July 2015

1-7 Berlin (Germany) * TC 91 Surface active agents

(USA) ** TC 86/SC 6 Refrigeration and air-conditioning/Testing and rating of air-conditioners and heat pumps

August 2015

26-28

Jeju (Korea, Republic of)

* TC 206 Fine ceramics

August-September 2015

31-4

Hokaido (Japan) * JTC 1/SC 35 Information technology/User interfaces

September 2015

1-6 (Canada) ** TC 163 Thermal performance and energy use in the built environment

7-14

Sydney (Australia) ** TC 96 Cranes

13 Seoul (Korea, Republic of)

* President's committee


13-17

Lahaina, Hawaii (USA)

** TC 127 Earth-moving machinery


* COUNCIL Council

14-18

(Canada) ** TC 205 Building environment design

14-25

Berlin (Germany) * TC 213 Dimensional and geometrical product specifications and verification


* DEVCO Committee on developing country matters

15-16

Seoul (Korea, Republic of)

* TMB Technical Management Board

16-18


* GA General Assembly


* CSC/FIN Council/Council Standing Committee on Finance (CSC/FIN)

17-18

Moscow (Russian Federation)

** TC 197 Hydrogen technologies

28-29

Basel (Switzerland) ** TC 44/SC 8 Welding and allied processes/Equipment for gas welding, cutting and allied processes

(Europe) ** TC 22/SC 19 Road vehicles/Wheels

Vienna (Austria) ** TC 33 Refractories

(Europe) ** TC 67 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries

(Japan) ** TC 133 Clothing sizing systems - size designation, size measurement methods and digital fittings

Johor Bahru (Malaysia)

** TC 165 Timber structures

Seattle (USA) ** TC 201/SC 6 Surface chemical analysis/Secondary ion mass spectrometry

(Netherlands) ** TC 258 Project, programme and portfolio management

October 2015

1 Rome (Italy) * TC 39/SC 4 Machine tools/Woodworking machines

5-9 Dublin (Ireland) * JTC 1/SC 38 Information technology/Distributed application platforms and services (DAPS)

8 Virtual (Unknown) * President's committee


12-16

Paris (France) * TC 34/SC 17 Food products/Management systems for food safety

15-17

Seattle (USA) * TC 201 Surface chemical analysis

19-23

(Germany) ** TC 39/SC 2 Machine tools/Test conditions for metal cutting machine tools

19-23

Gaithersburg (USA) ** TC 92 Fire safety

19-23

Gaithersburg (USA) * TC 92/SC 1 Fire safety/Fire initiation and growth

22-23

Berlin (Germany) * TC 209 Cleanrooms and associated controlled environments

26-30

New Delhi (India) * JTC 1/SC 27 Information technology/IT Security techniques

27-29

Berlin (Germany) * TC 256 Pigments, dyestuffs and extenders

28-30

Tsukuba (Japan) ** TC 202 Microbeam analysis

Madrid (Spain) ** TC 10/SC 8 Technical product documentation/Construction documentation

(Netherlands) ** TC 34/SC 2 Food products/Oleaginous seeds and fruits and oilseed meals

(Netherlands) ** TC 34/SC 11 Food products/Animal and vegetable fats and oils

Nairobi (Kenya) ** TC 38 Textiles

Nairobi (Kenya) ** TC 38/SC 1 Textiles/Tests for coloured textiles and colorants

Nairobi (Kenya) ** TC 38/SC 2 Textiles/Cleansing, finishing and water resistance tests

Nairobi (Kenya) ** TC 38/SC 23 Textiles/Fibres and yarns

Nairobi (Kenya) ** TC 38/SC 24 Textiles/Conditioning atmospheres and physical tests for textile fabrics

Sao Paulo (Brazil) ** TC 58/SC 2 Gas cylinders/Cylinder fittings

Madrid (Spain) ** TC 59/SC 16 Buildings and civil engineering works/Accessibility and usability of the built environment

Sao Paulo (Brazil) ** TC 135/SC 9 Non-destructive testing/Acoustic emission testing

Santiago (Chile) ** TC 195 Building construction machinery and equipment

November 2015

9-12

(Spain) ** TC 189 Ceramic tile

9-13

Kobe (Japan) * TC 21 Equipment for fire protection and fire fighting

11-13

(Malaysia) ** TC 123 Plain bearings

12-13

Kuala Lumpur (Malaysia)

** TC 227 Springs

(China) ** JTC 1 Information technology

4th Quarter 2015

Dayton, Ohio (USA) ** TC 159/SC 3 Ergonomics/Anthropometry and biomechanics

(China) ** TC 282 Water re-use

2nd Semester 2015

(France) ** TC 172/SC 1 Optics and photonics/Fundamental standards

(USA) ** TC 184/SC 4 Automation systems and integration/Industrial data

Month unknown 2015

Brussels (Belgium) ** TC 23 Tractors and machinery for agriculture and forestry

(Brazil) ** TC 23/SC 17 Tractors and machinery for agriculture and forestry/Manually portable forest machinery

(USA) ** TC 27 Solid mineral fuels

(Finland) ** TC 44 Welding and allied processes

(France) ** TC 45 Rubber and rubber products

Berlin (Germany) ** TC 138 Plastics pipes, fittings and valves for the transport of fluids

(Japan) ** TC 142 Cleaning equipment for air and other gases

(China) ** TC 155 Nickel and nickel alloys

(United Kingdom) ** TC 164 Mechanical testing of metals

(Austria) ** TC 190 Soil quality

Vienna (Austria) ** TC 190/SC 2 Soil quality/Sampling

January 2016

(China) ** TC 120 Leather

February 2016

(USA) ** TC 213 Dimensional and geometrical product specifications and verification

March 2016

17-18


* COUNCIL Council

April 2016


** TC 161 Control and protective devices for gas and/or oil burners and appliances

May 2016

(Brazil) ** TC 67/SC 4 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Drilling and production equipment

(India) ** TC 85 Nuclear energy, nuclear technologies, and radiological protection

June 2016

(Germany) ** JTC 1/SC 36 Information technology/Information technology for learning, education and training

1st Semester 2016

(China) ** TC 34/SC 16 Food products/Horizontal methods for molecular biomarker analysis

September 2016

19 Beijing (China) * COUNCIL Council

21-23

Beijing (China) * GA General Assembly

Paris (France) ** TC 17 Steel

Sao Paulo (Brazil) ** TC 209 Cleanrooms and associated controlled environments

Shanghai (China) ** TC 213 Dimensional and geometrical product specifications and verification

October 2016

(Korea, Republic of) ** TC 201 Surface chemical analysis

November 2016

(Norway) ** JTC 1 Information technology

Month unknown 2016

(Korea, Republic of) ** JTC 1/SC 23 Information technology/Digitally Recorded Media for Information Interchange and Storage

(Russian Federation) ** REMCO Committee on reference materials

(Denmark) ** TC 37 Terminology and other language and content resources

(Australia) ** TC 44 Welding and allied processes

(Malaysia) ** TC 45 Rubber and rubber products

Wellington (New Zealand)

** TC 46 Information and documentation

(Sweden) ** TC 102 Iron ore and direct reduced iron

(China) ** TC 138/SC 2 Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for water supplies

June 2017

(Australia) ** JTC 1/SC 36 Information technology/Information technology for learning, education and training

June 2018

(Korea, Dem. P. Rep. of)

** JTC 1/SC 36 Information technology/Information technology for learning, education and training

Documents

Standards publishedISO 50003:2014 * Energy management systems — Requirements for bodies providing audit and certification of energy management systems C TC 261 Additive manufacturing