Upload
costel41
View
229
Download
0
Embed Size (px)
Citation preview
8/7/2019 StarterKit EN
1/13
INELS MAY NOT BE JUST A COMPREHENSIVE SOLUTION!
LIGHTING
16 2/49
ALARMHEATING REMOTECONTROL INTERNET GSM SHUTTER
Starter itK
INELS MAY NOT BE JUST A COMPREHENSIVE SOLUTION!
8/7/2019 StarterKit EN
2/13
LIGHTING HEATINGREMOTE
CONTROLINTERNET GSM SHUTTER
6 21 9/4
ALARM
INELS may not be just a comprehensive solution!
Are you looking for a smart way of controlling the appliances or
devices in your home? Do you want to make your home shine? Do youwish to play with the lights, create light scenes or just to cut down on
costs by means of dimming? Is a comprehensive system too expensive
for you? Then our INELS Starter Kit, a partial solution package
containing basic units for the given area with optional further
extension up to a complex system, is the right solution for you.
8/7/2019 StarterKit EN
3/13
Starter itK
StarterKit will enable you to control the lighting,
appliances, blinds and heating
Morning lighting can be set according to
the intensity of the exterior light
The purpose of the Inels system
is to bring you, the user, an
intelligent electric installation
tailored to suit your needs for ana d v a n t a g e o u s p r i c e ;
the implementations ranging from
smallest applications with a partial
s o l u t i o n u p t o v a s t a n d
comprehensive systems.The scope of the Inels system
StarterKit is suitable for partial
implementations of partial areas
of your electric installations. That is
why it can be used to control onlycertain standalone parts such as
heating, dimming, controlling
the blinds, switching appliances
on and off or communicating with
a security system.
INTRODUCTION
No matter whether you purchase the LIGHT StarterKit (to control and dim lighting), HEATING (to regulate
heating) and/or BLINDS (to control blinds, jalousies or sunshades), you can always be sure that you have
bought the best that there is. This is because you ar e totally free to set everything as you need and to
modify the settings at any time.
The INELS StarterKit grows with you!
The INELS StarterKit contains basic components for the given area of intelligent electric installation
(LIGHT / HEATING / BLINDS) which can be mutually combined in any way or extended in the future. You
can also choose a combination of the above mentioned areas (e.g. LIGHT and HEATING) and/or work
your way towards a comprehensive intelligent electric installation system, which INELS doubtless
represents.
Flexibility and customisation these are two key advantages of the INELS system. All modifications of
functions are done in IDM soft ware, supplied free of charge, on the PC ; unlike the classical installation
where you have to insert or replace devices offering a certain functionality in the system (which
the location or the layout of cables often renders impossible).
All of the components of the INELS StarterKit offer full performance and, if included in a comprehensive
system, offer the same parameters.
The StarterKit is pre-connected and pre-programmed; i.e. the device will work as soon as it is plugged
in so that you can try it out. However, as these are connected to a 230 V power supply, they must be
installed by a qualified technician.
The StarterKit Manual serves to provide you with a basic presentation of the system; go to the IDM
Manual for advanced setting information. If you are interested in setting or extending the system,
contact the network of our authorised system partners (see http:www.inels.com).
HEATINGLIGHTING
Basic terms used in intelligent electric installation:
Unit
The term of unit refers to e.g. a switching actuator, input module or a thermostat connected to the bus. It is possible to connect up to 32 units to a
single bus. The central unit contains two buses and MI2-02M modules enable extending the system by further 4 buses = 6 buses = 192 units. The
unit does not refer to the number of connected components (e.g. switches or buttons) because a unit mostly features several inputs or outputs.
Lowering blinds and regulating the brightness of lighting
fixtures as the exterior light intensity decreases
The data from the weather station help you control
the lighting, blinds as well as heating
Setting-off of the light alarm in the event of
unauthorised entry
Sensor
The term of sensor refers to a unit scanning a certain quantity, e.g. pressing a button, temperature, lighting level, voice, IR signal from
the remote control etc.
Actuator
The term of actuator refers to a unit controlling an appliance; it e.g. switches a socket, dims a lighting fixture, controls a thermal head, sends
a signal etc.
IDM
This is the acronym which stands for the INELS Designer & Manager freely supplied software used for setting the par ameters of the functions of
the entire system.
Bus
This is two conductors (wires) mostly a twisted parallel pair connecting all units in the building. The central units use the bus to communicate
with other units, collect information from sensors and send commands to actuators. The bus represents the main difference between
the intelligent and classical electric installation. The indisputable advantage of the bus is the possibility of making flexible extensions or
modifications, which is rather limited i n the event of classical installation.
REMOTECONTROL INTERNETSHUTTER GSM
6 /1 924
ALARM
8/7/2019 StarterKit EN
4/13
1 9 /46 2
ALARMGSMSHUTTER REMOTECONTROL INTERNET
All StarterKits feature the following basic components:
CU2-01M central unit
PS-30-24 power supply
BPS2-01M separator of the bus from the power supply unit
This is the heart of the entire system and acts as a n interface between the user software environment and other sensors/actuators on the bus. It is connected
via a cable to a computer or network (it has a dedicated IP address). The configuration of the unit, and hence the entire system, is done in the IDM configuration
software, which is designed for the MS Windows operating systems. The built-in web server enables remote configuration of the unit and control over user
functions via an internet browser (o n a PC, phone or PDA). The 6-MODUL type is designed for switchboard installation.
The 30W switched and stabilised power supply w ith 230 V power input and fi xed 24 V DC power output into the system.
This is used for impedance separa tion of a single branch of the CIB bus. The front panel features a LED informing abo ut the voltage on CIB clamps.
The system allows remote control and configuration via a PC It is possible to use text messages as a partial control tool
PSM1
PSM2
AC 230V
L
N
PS 30/24
CIB +
CIB -
DC 24V / 1,25A
3OW
AC 230V
5OHz / 60Hz
LIGHTING HEATINGStarter itK
8/7/2019 StarterKit EN
5/13
Starter itK
Do you want to make your home
shine? Do you wish to play withthe lights, create light scenes or
just to cut down on costs through
dimming?
Control of the lighting intensity is
a very popular way to create anenjoyabl e atm osphere, for
pressing a single button will
automatically turn on the lights to
the preset intensity to suit your
requirements for a particularactivity, i.e. your living room will
have different light scenes forwatching TV, reading a book,
a family dinner or chatting with
friends.
Regulation of the glow according to the sensor of the outdoor light
intensity
Sensors:
Actuators:
The possibility to regulate the glow of bulbs and fluorescent tubes will pay you back in a very short
time. The lights will maintain the required constant intensity according to the intensity of the exterior
light. This will prevent your lights from working on 100% capacity even though the sun is shining
outside. This will be appreciated especially by the owners of companies, public institutions,
commercial and shopping centres, i.e. everyone who pa ys for the energy.
SOU sensor - outer sensor of the lighting intensity
ADC2-40M - converter of the outer sensor signal to the bus
For bulb lights DA2-22M (2x 500VA) or DIM-6 (2000VA)
For fluorescent tube lights LBC2-02M (2 fluorescent tubes)
LIGHT
LIGHTING
Automatic switch-on of the lights
in the event of person's movement
Automatic switch-on of the lights in the event of person's movement.
Sensors:
Actuators:
Start-off of the light alarm in the event of unauthorised entry.
Sensors:
Persons' movement sensors (the so-called PIR sensors or also infra passive sensors) are suitable not only for securing the building and preventing from
unauthorised access. It is possible to use this switch for other functions e.g. switching on the lights. This is suitable especially in corridors, staircases, entrances,
toilets etc., i.e. wherever one usually moves for only a limited period of time and where the light often shines uselessly if someone forgets to turn it o ff.
JS-20 LARGO PIR detector of persons' movement
IM2-20B - input unit enabling the connection of 2 PIR sensors and the transfer of their signal to the bus
SA2-02M (or SA2-02B) - switching ac tuator (2 separate outputs = 2 light circ uits) for switching
DA2-22M - dimming actuator (2 separate o utputs) - this option enables gradual dimming of the glow a fter the movement has stopped.
The IDM configuration programme also allows setting delayed switch-off and/or super ordinate control by means o f a button = the light can beswitched on regardless of movement (cleaning up, maintenance etc.).
Every light connected via a switching and/or dimming unit can be a part of the so-called light alarm. Therefore, in the event of trespassing, predefined lights
are switched on or start blinking i n addition to the text message sent and the alarm activated, which will certainly put the intruder off. The security functions
include one which w ill considerably contribute to the safeguarding of your home, namely simulation of presence. While you are away (on holiday, visiting
friends etc.) lights in various ro oms are switched on in irr egular intervals in the evening; the lights along your driv e will be switched on at ni ght and blinds can
be pulled up and down to enhance the o verall effect: to make the house look as i f you were in.
No other sensors or ac tuators are necessary. It is possible to programme this function onto any actuator and switch on by a suitable control.
Start-off of the light alarm
in the event of unauthorised entryRegulation of the glow according to
the sensor of the exterior light intensity
8/7/2019 StarterKit EN
6/13
Starter itK
1 3 5 7
42 6 8
I f y o u u s e d i m m i n g a c t u a t o r s ( b u l b o r f l u o r e s c e n t t u b e ) , y o u c a n s e t a l i g h t s c e n e t o f i t e v e r y o c c a s i o n .
The scene may meet particular requirements and/or merely create an atmosphere. The following example might help you imagine possible light
scenes: in the living room there is a ceiling light (1), wall spotlights by the TV set (2) and a lamp by the sofa for reading (3).
The most frequently used settings could include:
1+3 off, 2 at 50 %
1+2+3 at 100%
1 at 50 %, 2 off, 3 at 70 % (or to suit one's needs and according to the output power)1+2+3 at 30%
WSB2-80 group wall controls, 8 buttons
DA2-02M - dimming actuator 2x500VA, 2 pieces necessary in our example
The scenes are switched by a suitable sensor, in most cases it is the WSB2 wall control unit with 2, 4 or 8 buttons. If you use the 8-button WSB2-80 (the size
of a single switch!), you can set the button for example in this way:
Button 1: Controls the ceiling light (1)
Button 2: Controls the wall spotlights (2)
Button 3: Controls the reading lamp (3)
Button 4: launches the Watching TV light scene
Button 5: Launches the "Party light scene
Button 6: Launches the "Reading light scene
Button 7: Launches the "Intimate Moments light scene
Button 8: Switches all off
Buttons 1-3 enable controlling the lighting as if you were using a controlled dimmer, i.e. every time you press a button you switch lights on/off and every time
you hold the button pressed you dim the light until you release the button, the value is then stored in the memory so that if you press the b utton again, you
switch the light on to this preset level.
A light scene will create a pleasant atmosphere.
Watching TV:
A party:
Reading:Intimate moments:
Sensors:
Actuators:
T he In ti ma te M om en ts l ig ht s ce ne L ig ht s ce ne f or s it ti ng o ut si de T he Re ad in g" l ig ht s ce ne
LIGHTING
Two-channel dimming actuator for fluorescent
tubes LBC2-02M
Cont ains 2 power ou t pu t s 0(1)-10V and
a subordinate relay with switch contact. This unit is
intended to control the dimming ballast.
Components of the Light StarterKit:
Connection of
fluorescent tube:
Dimming ballast DIML 218This component is used for the regulation of
the glow of fluorescent tubes. It is controlled by 1-
10V signal and is connected to the Inels system
through DAC2 or LBC2 converters.
Wall control unit with short way control WSB2-40
The control unit features an integrated temperature
sensor, micro buttons and a LED indicator in every
cradle.
Dimming two-channel actuator DA2-22MThis is intended for switching and dimming the RLC
loads. It combines 2 230 V AC inputs and 2 semi-
conductor controlled 230 V AC outputs.
Connection of bulb:
AC 230V
DIML 218 LBC2-02M WSB2-40 DIML 218
DA2-22M WSB2-40 LM2-11B
CIB+
CIB -
7 6 5 4 3 2 1
H L
vstup
220V-240V
DC1..10V
DIML218
AC 230V
NC/GND
PE
7 6 5 4 3 2 1
H L
vstup
220V-240V
DC1..10V
DIML218
NC/GND
PE
Thermo sensor TC
8/7/2019 StarterKit EN
7/13
Starter itK
The blinds and the roof of the pool close
automatically in bad weather
Systems of blinds and sunshades
are designed to protect you, notonly from adverse weather.
T o u c h e d b y t h e r a y s o f
the morning sun, the blinds can go
up automatically to make your
waking pleasant while otherb l i n d s m a y r e m a i n d o w n .
Watching TV is enjoyable even on
sunny af ternoons; at nig ht
the blinds reduce the risk of
unwanted persons enteringthe building and they can also
simulate people's presence inthe house while you are away. If
the weather conditions change
during the day, the sensors of
the INELS system will guaranteethat your house or flat i s optimally
protected.
The blinds go up automatically with the first rays of sun,
they are lowered as soon as the intensity of the exterior light drops.
Sensors:
Actuators:
The outer sensor of the exterior light intensity just like the regulation of the lighting can be used for
automatic lowering of blinds as soon as the intensity of the exterior light decreases under a preset
level. You can install several sensors on the building (e.g. walls facing west and east) and these sensors
can control different groups of blinds. You can also define the opposite action: dimming. If the sensor
detects strong sunshine, it will lower the blinds.
SOU sensor - outer sensor of the lighting intensityADC2-40M - converter of the outer sensor signal to the bus
Wall group button to control 1, 2 and 4 blinds (WSB2-20, WSB2-40, WSB2-80)
It is also possible to co nnect wireless RF Controls in the shape of a button or key tag).
The number of actuators must match the type of blinds::
JA2-02B/DC for blinds installed inside or between double-glazed windows (uses 24V DC)
JA2-02B for blinds on the o utside (uses 230V AC)
RFJA-12B for wireless control
The blinds can also be controlled
by means of light scenariosThe blinds go up automatically
with the first rays of sun
BLINDS
SHUTTER
The blinds and the roof of the pool close automatically in bad weather.
Sensors:
Actuators:
The blinds can also be controlled by means of light scenarios.
Sensors:
The weather station observes the speed o f the wind, rainfall, humidity, temperature and light. Combinations of these quantities enable defining conditions
under which the system makes the outer wall blinds or swimming pool roof close. In this w ay you can protect your property against adverse weather (storms,
continuous rainfall, high/low temperatures, excessive sunshine etc.). Or you can combine values of temperature and light in order to pr otect the water in your
swimming pool and windows fr om strong sunshine. All you have to do is to set an a ppropriate configuration in the IDM.
Weather station MFWS
The number of actuators must match the type of blinds:
JA2-02B/DC for blinds installed inside or between double-glazed windows (uses 24V DC)
JA2-02B for blinds on the o utside (uses 230V AC))RFJA-12B for wireless control
It is possible to add the controls of blinds to the light scenes. You always pull them down so that your neighbours won't see you, anyway. Press the Watching
TV button on the wall control unit and the system will take ca re of the rest:
It will set the lights for the defined scene
It will pull down defined blinds
It will turn on the TV (or projector) and audio
If the blind controls are installed in the system, no other actuators or sensors are needed. Everything is a matter of smart settings.
8/7/2019 StarterKit EN
8/13
Starter itK
Outer blinds will put burglars off.
In the event of trespassing and/or burglar alarm, it is possible to lower all blinds immediately and prevent the burglar from accessing the building
(or at least make it more difficult). Moreover, the burglar will realise that the building is secured the smart way and will decide to move on to a place
where no such obstacles occur. The command to lower the blinds can also be issued via a mobile phone or a PC connected to the internet.
The police statistics show that most burglars enter buildings through windows because it is the easiest way. Even a novice burglar will find it
extremely easy to pry a window open, especially where no security blinds are installed to prevent unauthorised access.
Not only does the engine propelled blind ensure that the building cannot be broken into, but it also offers saving of energy as well as thermal and acoustic
isolation. It helps to turn your home into an oasis of peace and quiet protecting you from intrusive looks and br inging you true and untroubled privacy, which
is everyone's natural need, especially in these hurried times.
Lowered blinds contribute toan atmosphere of peace and privacy
The blinds will go up with the first rays of sunso that you can enjoy a pleasant morning
Lowered blinds will make watching TVmore pleasant on sunny days
Controlling blinds is necessary if youwant to achieve perfect light scenes?
SHUTTER
The Blinds StarterKit contains:
JA2-02B blind actuator for 1 blind
This unit is intended to control the drives of blinds, garage doors, entrance gates etc., which are controlled in two directions
and feature a built-in end sensor: thermal sensor plug.
WSB2-40 wall control unit with shortcut controlThe control unit features an integrated temperature sensor, micro buttons and a LED indicator in every cradle.
Connection diagram:
CIB+
CIB-
AC 230V LN
JA2-02B
L
UP/DOWN
RUN
JA2-02B
L
UP/DOWN
RUN
SA2-04M WSB2-40 2 x JA2-02B
i
8/7/2019 StarterKit EN
9/13
Starter itK
In these latitudes, virtually no
building can do without heating.Be it a boiler burning solid fuels,
bio fuels, central heating, electric
heating, electric or water floor
heating, thermal pumps, fireplace,
fan coil or ventilation system, theINELS will enable you to control
them all in an effective and
convenient way so that you are
pleased not only by the warmth,
but also by your energy bills. Everysource of heating requires
different regulation. INELS willcope with each and will also
enable you to connect the weather
station in a sophisticated way and
to include the controls of blinds asanother insulation element
preventing the leakage of heat or a
solar system as a source of heat. It i s
not necessary to install a separate
control unit for every technology,so you will cut down on purchase
costs.
HEATING
Heating medium: Water
Even nowadays, so-called central heating is by far the most widespread way of heating. The water
warms up the radiator which in turn warms up the ai r. If no thermal heads are installed on the valves
of the radiators, it is impossible to regulate heating except by turning the boiler on or off.
The drawbacks of such regulation are obvious: all parts of the building are heated, but regulated in
a single place (where the thermostat is located). The INELS system brings a smart solution: use of
thermal heads that can be controlled electrically.
There are 2 types of thermal heads:
1) those that can close/open the valve c ompletely and
2) those that close/open the valve in i ncrements, i.e. in proportion to the temperature.INELS features a special actuator for both types which can be fitted in the installation case near
the thermal head. The actuator also features an output for a thermal sensor so that you can scan and
control temperature merely in the room where the radiator is located. The same principle also applies
to water floor heating or fan coils.
HEATING
Sensors:
Actuators:
Thermal sensor TC to be connected to HC2-01B actuator
HC2-01B/AC thermal head controller to control the thermal heads - option 1) (closed/open) for 24 - 230V AC power supply.
- Recommended thermal head: Mhlenhoff ALPHA AA 230 V
HC2-01B/AC thermal head controller to control the thermal heads - option 2) (joint regulation) for 0 - 10V.
- Reco mmended thermal head: Mhlenhoff ALPHA AA 0-10 V
Heating medium: Electricity
Sensors:
Actuators:
Thermal pumps, solar panels and other sources of heat
Sensors:
Actuators:
Electrical heating is very easy to regulate. No matter whether you have direct convectors, floor cable, glowing panels or electric fan coils, you can easily turn
them on or off with any switch actuator. Like thermal heads, this offers the advantage to use the SA2-01B switch actuator to include in the installation case, as it
allows switching up to 4000VA and features an input for a thermal sensor.
Thermal sensors TC to be connected to any SA2-0x actuator
SA2-01B 1x 16A output to be included in the installation caseSA2-02B 2x 8A output to be included in the installation case
SA2-02M, SA2-04M, SA2-012M - 2x, 4x and 12x 16 A outputs to be included in the switch board
The regulation of a more complex system is done through scanning the temperatures in required places and subsequent switching on and off of relevant
devices (pumps, servo valves etc.). The regulation algorithm is set in the IDM. The INELS system can also communicate with other systems through the RS232
serial line. At any rate, we recommend you to have these advanced settings of the regulation done by professionals.
Thermal sensor of the TC type, Ni100/1000, Pt100/1000 or other
TI2-04B a unit enabling the connection of up to 4 TC thermal sensors
ADC2-40M a unit enabling the connection of up to 4 Ni100/1000, Pt100/1000 thermal sensors
Any SA2-0x switch actuator
DAC2-04M (B) 0-10V converter to control the servo drives, thermal valves etc.
Regulation of heating in individual roomsH ea ti ng m ed iu m - e le ct ri ci ty H ea ti ng m ed iu m - w at er
S iK
8/7/2019 StarterKit EN
10/13
Connection diagram:
Alpha AA 230V thermal head
Is used to regulate the thermostat valves of the floor, radiator and convector heating.
HC2-01B/AC thermal head controller
Is used to switch the thermal heads 0/1 in 24-230V AC voltage range. The actuator is equipped with an input for measuring
the temperature by means of a TC or TZ sensor and is to be included in the installation case.
IART2-1 room thermal regulator
Is used to regulate the temperature in a room or building. The regulator knob enables one to control the given heating/cooling
circuit. The buttons are used to alter the mode of the circuit. The sensor features a built-in thermal sensor.
Components of the Heating StartKit:
AC 230V
CIB+
CIB-
L
N
AC 230V
L
N
3 x HC2-01B/AC
Under floor heating
3 x Thermo sensor TC
EST-2 3.5 TFT touch screen
A control featuring a touch screen to be included in the installation case. It enables controlling the functions of the INELS
system.
HEATING
The weather station sends an impulse to switch onthe heating if the weather is cold
The regulation of heating is automatic according tothe programme or manually controlled
Settings in the IDM programme
Radiators are controlled separately
by means of thermal heads
Starter itK
How do I intervene with the regulation?
How does the regulation work?
Of course, the system can be controlled without any co mputer. The INELS offers you several choices:
IART2-1 - an analogue thermostat in the design of the Elegant switch to be included in the installation case, the multiple case enables
combinations with other devices. This control enables configuring the preset temperatures in +/- 3 C increments and/or switching the heating off
completely.
IDRT2-1- a digital thermostat in the design of the Elegant switch to be included in the installation case, the multiple case enables combinations
with other devices. The function is the same as that o f IART2, but it also contains a display and allows configuring the heating schedule.
EST-2 - a control featuring a touch screen in the Logus90 switch design to be included in the installation case. Besides controlling heating the EST-2enables controlling other functions of the INELS intelligent system. In preparation, sale from 08 /2009..
The IDM configuration software features a component dedicated to the regulation of heating. In practice, it is possible to use any thermal sensor included in
the system (i.e. according to the temperature in the location of the sensor) to control any heating component (i.e. place where an actuator is located)
separately (every room may be set a different temperature). In this way it is possible to set the system from basic conditions up to a sophisticated and
comprehensive solution with a number of thermal inputs (e.g. outer temperature, temperature of the floor, temperature of the boiler etc.). The IDM also
enables you to set time limits of heating in the same way as the digital thermostat. The key advantage brought by the INELS system is an overview of
the conditions of heating displayed on the touch screen and/or in the IDM as the ground plan of the building. In this way, you can switch on or regulate the
heating even if you are a way or late...
8/7/2019 StarterKit EN
11/13
CIRCUIT BREAKERS
& PROTECTORS & FUSES
HOUSE SWITCHES
AND SOCKETS
MODULAR
ELECTRONIC DEVICES
REMOTE
CONTROL
R
Next portfolio products from offer ELKO EP, s.r.o.:
8/7/2019 StarterKit EN
12/13
Overview of functions of the INELS system
Controlling lights,
light scenes depending on the intensity of exterior light,
movement or time
Regulating heating and air conditioning
in every room (heating circuit) separately, regulating
temperature according to the weather outside
Controlling outer blinds,
garage doors, entrance gates and swimming pool roofs
Security system
monitoring movement, protection against burglary
Fire prevention through detection of gas or smoke
Simulation of presence
Controlling blinds in defined times automatically,
switching lights on and off arbitrarily
Central controls
of selected lights and devices, switching socket circuits
by a single pressing of a button
Controlling appliances
according to time / temperature / intensity of light orother preset modes makes is possible to control any
appliances connected to the INELS system
8/7/2019 StarterKit EN
13/13
LIGHTING
169 42/
ALARMHEATING REMOTECONTROL INTERNET GSM SHUTTER
ELKO EP, s.r.o.| Palackho 493, 769 01 | Holeov - Vetuly | Czech Republic | Tel +420 573 514 211 Fax +420 573 514 227 [email protected]. Publication | 2009
| |
www.inels.com