State Industrial Rrofil

7/24/2019 State Industrial Rrofil

1/67

STATE INDUSTRIAL RROFIL

OF

DAMAN U.T. [2015-16]

Prepared by:

S.D.RAMAVAT

INVESTIGATOR (EI)

MSME DEVELOPMENT INSTITUTE

Govt. of India

Ministry of Micro, Small & Medium Enterprises

Harsiddh Chambers, 4th

Floor,

Ashram Road, Ahmedabad-380 014

Tel.No. 079-27543147 & 27544248

E-mail :[email protected]

Website:www.msmediahmedabad.gov.in

Udyami Help Line: 1800-180-6763 (Toll Free)
mailto:[email protected]:[email protected]:[email protected]://www.msmediahmedabad.gov.in/http://www.msmediahmedabad.gov.in/http://www.msmediahmedabad.gov.in/http://www.msmediahmedabad.gov.in/mailto:[email protected]


2/67

Map of Daman


3/67

.1.

State Industrial Profile of Daman District

1.General Characteristics of the District.

1.1 Location & Geographical Area.

From the 8thto 13thcentury, Daman and Diu, which was a part of Goa was a

stronghold of the Chowda Rajput who were ousted by the Waghela who in turns

were expelled by Muslim in 1330. It continued under Muslim rule for another

two hundred years till it was conquered by the Portuguese. The Portuguese

ruled Goa 451 years (1510-1961).

Most worthy event occurred in connection with the liberation of Portuguese

settlement Operation Vijay. Just before the midnight of December 16, 1961ending the colonial rule. The different land blocks on the west coast of India.

Daman Diu and Goa came to form one political unit after liberation from the

erstwhile Portuguese regime in 1961. In 1987, when Goa becomes a full fledged

state, Daman and Diu was separated from Goa.

Daman is coastal town bound on west by the Arabian Sea and surrounded on all

other sides by the Territory of Gujarat. Daman is 193 Km from Mumbai, on the

western side of National Highway No 8. Vapi, about 12 Kms. from Daman, is the

Main Rail Head.

The District of Daman is situated on the western coast of India between theparallels 20 27 58 and 20 22 00 of latitude north and between themeridians 724942and 72 5443of longitude east of Greenwich. Its lengthfrom the extreme north to south measures 11 kms and width from east to west,

measures 8 kms. The altitude is 12 metres above the sea level.

The total area of Daman District is 72 Sq. Kms. With a coastline about 12 Kms.

Long. Only 91.25 hectares of land is under forest cover which about 1.28% oftotal Geographical Area.


4/67

.2.

1.2: Topography:

Daman and Diu topography is a typical island topography, which does not

exhibit a variety of landforms. There are a number of rivers that provides water

to the territory of India.

Daman is one of the two districts of the union territory, which is located on the

Indian west coast. The place is bordered by a variety of topographical features.

The district of Valsad in Gujarat state lies towards the east, the well known river

called Bhagwan flows towards the north, the Arabian Sea is located towards the

west and River kalem flows towards the south.

The major river of the region Damanganga divides the Daman district into two

separate parts. As many as three rivers provide water to the district. All these

rivers flow towards the west direction. The river Bhagwan runs along the

northern border of the district, the river kalem runs along the southern border

and the river Damanganga runs in between the other two rivers.

CLIMATE

Sr. No. Particular Unit Daman Dist.

1. Climate - -2. Temperature Centigrade 31i) Mean Maximum Centigrade 22ii) Mean Minimum3. Annual Rainfall Year

2010 MM 24362011 MM 19692012 MM 14392013 MM 2449

4. Humidity % 26-1005. Maximum wind speed Km/Hour 30

Source: Climate: Meteorological Office, Coast Guard, Daman, Central Water

Comm., Daman


5/67

.3.

1.3 Availability of Minerals.

NIL

1.3 PRODUCTION OF MINERALS DURING 2013-14 & 2014-2015

Sr.No.

Name of the minerals PRODUCTION(IN M.T)

PRODUCTION(IN M. T)

Major Minerals 2013-2014 2014-2015

01. Fireclay Nil Nil

02. Chalk Nil Nil

03. Limestone Nil Nil

04. Prelate Nil Nil

05. Silica sand Nil Nil

Name of the minerals PRODUCTION(IN M. T)

PRODUCTION(IN M. T)

Minor Minerals 2013-2014 2014-2015

01. Black trap Nil Nil

02. Ordinary Sand Nil Nil

03. Ordinary Clay Nil Nil


05. Sandstone Nil Nil

06. Red Clay Nil Nil

07. Dolomite Nil Nil

08. Hard Murram Nil Nil

08 Soft Murram Nil Nil

09 Gravel Murram Nil Nil


6/67

.4.

1.4: FOREST

There is no forest in U.T of Daman, However, an area of 91.25 hector

has been brought in under forest by way of developing waste and coastal

land under various planned development programmes and notified as

forest land the total area. Presently activities of forest departmentlimited only up to development of waste land and new plantation

environmental improvement through a forestation programme

1 No. Of Division 1 No.

2 No. Of Range 1 No.

3 No. Of forest check post 4 Nos.

4 No. Of Guards 21 Nos.

5 Forest Area (Reserved) 23.90 Ha

6 Proposed Forest Area

(Reserved)

67.35 Ha

Total 91.25 Ha

1.5

: Administrative set up.

A union territory with the Administrator (Common to Daman, Dadra & Nagar

Haveli) as the head of the administration assisted by the Collector. The Lok

sabha constituency is common with the Daman and the UT has no

legislative. The Union Territory of Daman is a single tier State cum District

cum Taluka administration. The Administration Structure of Daman District

is under.

Sr. No. Particulars Unit Daman

District1. District Nos. 12. Talukas/Tehsil Nos. 13. Blocks Nos. 14. District Panchayat Nos. 15. Villages Panchayats Nos. 106. Villages Nos. 217. Census Villages Nos. 158. Municipal Councils Nos. 19. Statutory Towns Nos. 1

10. Census Towns Nos. 611. Urban Wards Nos. 15


7/67

.5.

2.District at a glance

S.No. Particular Year Unit Statistics1 Geographical features

(A) Geographical Data

i) Latitude 20.25, N 20 27 58and

20 22 00ii) Longitude 72.53, E 72 49 42

and72 54 43

iii)

Geographical Area Hectares 72 Sq. Km.(B) Administrative Units

i) Sub divisions Nos. 1ii) Tehsils Nos. 1iii)Sub-Tehsil Nos. 1iv)Patwar Circle Nos. 1v) Panchayat Simitis Nos. 1vi)Nagar nigam Nos. -vii) Nagar Palika Nos. 1 noviii) Gram-Panchayats Nos. 10 Nos.

ix)

Revenue Villages Nos. 21 nox) Assembly Area Nos. -

2. Population(A) Sex-wise

i) Male 2014-15 Nos. 1,24,659ii) Female 2014-15 Nos. 66,514

(B) Rural Population 2014-15 Nos. 32,3133. AgricultureA. Land utilization

i) Total Area 2014-15 Hectare 7200ii)

Forest cover 2014-15 Hectare 91.25iii)Non Agriculture Land 2014-15 Hectare 603.32iv)Cultivable Barren

land2014-15 Hectare 3245.95

4. Forest

(i)Forest 2014-15 Hectare 2.43 sq km(23.91Ha.)


8/67

.6.

5. Livestock & Poultry

A. Cattle

i)

Cows 2007 Nos. Nilii) Buffaloes 2007 Nos. 1227

B. Other livestock

i) Goats 2007 Nos. 1169ii) Pigs 2007 Nos. 170iii)Dogs & Bitches 2007 Nos. 149iv)Railways

i) Length of rail line 2014-15 Kms. Nil

V) Roads

a) National Highway 2014-15 Kms. -b)State Highway 2014-15 Kms. -c) Main District Highway 2014-15 Kms. 53d)Other district & Rural Roads 2014-15 Kms. 37e) Rural road/Agriculture

Marketing Board Roads2014-15 Kms. 101

f) Kachcha Road 2014-15 Kms. -VI) Communication

a) Telephone Connection 2013-14 Nos. 4302b)Post Offices/Branch 2013-14 Nos. 13c) Telephone Centre 2013-14 Nos. 05d)Density of Telephone 2013-14 Nos./1000

person-

e) Density of Telephone 2013-14 No.perKM.

3.05

f) PCO Rural 2013-14 Nos. 70g)PCO STD 2013-14 Nos. 144

h)

Mobile 2013-14 Nos. -(VII) Public Health

a) Allopathic Hospital 2014-15 Nos. 01b)Beds in Allopathic hospitals Nos. 202c) Ayurvedic Hospital Nos. 03d)Beds in Ayurvedic hospitals Nos. -e) Unani hospitals Nos. -f) Community health centre Nos. 01


9/67

.7.

g)Primary health centers Nos. 02h)Dispensaries Nos. -i) Sub Health Centers Nos. 20j) Private hospitals Nos. 07

(VIII) BANKING

Commercial

2014-15 Nos.

(a) Commercial Bank Nos. 14(b) Rural Bank Products Nos. 10(c) Co-Operative bank

productsNos. 06

(d) PLDB Branches Nos. 07(e) Privet Bank Nos. 09

(IX) Education 2014-15 Nos.

(a) Primary School Nos. 39

(b)

Middle schools Nos. 26(c) Secondary & Senior

secondary schoolsNos. 17

(d) ITI Nos. 01(e) Colleges Nos. 06(f) Technical University Nos. 03

2.1 Existing Status of Industrial Areas in the District DAMAN

S.No Name of Ind.Area Landacquire

d inhectare)

Landdevelo

ped inhectare)

Prevelling

RatePerSqm(inRs.)

No.Of

Plots

No.Of

allottedplots

No.of

Vacantplots

No.ofUnits in

Production

OIDCINDL.ESTATE

1 Ringanwada 103790 103790 2125 77 77 - -2 Mahatma

Gandhi Udyog

Nagar Indl.Estate, Dabhel.

112000 112000 2125 30 30 - -

GOA .I.D.C

1 Daman Indl.Estate,Somnath,Daman

20Hectare

28.76* 1,500/perSq.mt.

70Nos.Ofshedsand89nos.Ofplot

70Nos.Ofshedsand89nos.Of

plot

- 90 Nos.

Private Industrial Estate is also available


10/67

.8.

3.INDUSTRIAL SCENERIO OF DAMAN

3.1 Industry at a Glance

S.No. Head Unit Particulars1 REGISTERED INDUSTRIAL UNIT Nos. Micro-376

Small-5082 TOTAL INDUSTRIAL UNIT Nos. 9793 REGISTERED MEDIUM & LARGE

UNITNos. Medium-60

Large-354 ESTIMATED AVG. NO. OF DAILY

WORKER EMPLOYED IN SMALLSCALE INDUSTRIES

Nos. -

5 EMPLOYMENT IN LARGE AND

MEDIUM INDUSTRIES

Nos. Medium-7863

Large-48936 NO. OF INDUSTRIAL AREA Nos. 217 TURNOVER OF SMALL SCALE

IND.IN LACS - -

8 TURNOVER OF MEDIUM &LARGE SCALE INDUSTRIES

IN LACS - -

3.2 YEAR WISE TREND OF UNITS REGISTERED

YEAR NUMBER OFREGISTERED

UNITS

EMPLOYMENTNos.

INVESTMENT(lakh Rs,)

UP TOSept.2006

2005-06 27 559 374.42

2006-07 118 2391 8275.92007-08 78 1315 2361.52008-09 77 1752 5365.32009-10 36 892 2302.69

2010-11 69 2522 6836.642011-12 - - -2012-13 - - -2013-14 64 1667 7105.002014-15 51 1884 4766.00

Total 520 12982 30550.81


11/67

.9.

3.3 DETAILS OF EXISTING MICRO & SMALL ENTERPRISES AND

ARTISAN UNITS IN THE DISTRICT

NICCODENO.

TYPE OFINDUSTRY

NUMBEROFUNITS

INVESTMENT(Lakh Rs.)

EMPLOYMENT

20 Agro based 1 18.00 522 Soda Water 2 23.00 2423 Cotton textile 14 959.00 32224 Woolen, Silk &

artificial Threadbased clothes.

20 2371.00 687

25 Jute & Jute based - - -

26 Ready-madegarments &embroidery

6 1024.00 1622

27 Woods/woodenbased furniture

1 37.00 22

28 Paper & Paperproducts

31 2198.79 610

29 Leather based - - -31 Chemical/Chemical

based11 394.00 178

30 Rubber, Plastic &Petro based

502 37054.75 12141

32 Mineral based - - -33 Metal based (Steel

Fab.)40 2556.00 1088

35 Engineering units 4 54.00 5236 Electrical

machinery andtransportequipment

47 6786.00 1716

97 Repairing &Servicing

11 1080.00 167

01 Others 190 24917.43 6041Kachori Making - - -


12/67

.10.

3.4

Large Scale Industries / Public Sector undertakings.

Industrial units having investment exceeding Rs. 10 crore in plant and machinery

are classified as large industrial units. An Entrepreneur or a company desirous to set up

a large project needs an approval in the form of industrial license from Government of

India (GOI) under the provisions of Industries (Development and Regulations) Act,

1951. In July 1991, Government of India liberalized the licensing procedure and

exempted almost all the industries from the purview of industrial licensing, except a few

industries which are of strategic importance. As per the present licensing procedure,

only two industries are reserved for public sector and four industries, which are of

strategic importance, need an industrial license. The rest of industries are required to

file Industrial Entrepreneurs Memorandum (IEM) with Secretariat for Industrial

Approval, Ministry of Commerce & Industry, Government of India, on observing certain

requirements with respect to location and environment. In the case of setting up of an

Export Oriented Unit (EOU) or setting up a project in Special Economic Zone (SEZ), a

Letter of Permission (LoP) is required to be obtained from the Development

Commissioner of the concerned SEZ. Thus, the procedure for setting up a largeindustrial unit would be either filing of IEM, obtaining Letter of Intent (LOI)/ Industrial

License or obtaining Letter of Permission (LoP) in the case of 100% EOU or SEZ unit.

List of the units in Daman & nearby Area

Sr.No.

Name and Address Categories Name of Products

1. M/s Suzlon Energy LtdPlot No.57/3, (2&3),

Dunetha, Daman

Manufacture Windmill parts etc.

2. M/s. Gini & Jony Apparel PvtLtd.Sr.no.56/2, Ringanwada,Near. Five Brigde office, naniDaman

Manufacture Ready garments


13/67

.11.

3. Meehika Packaging (I) Ltd.,plot no.38, GDDIDC,. DamanIndu. Estate, Somnath road,Dabhle, Da.

Manufacture Injection moulded articles,injection blow & injectionstretch blow

4. Suzlon energy Ltdplot No.86/3,4, 87/3,4,88/1,2,3, 89/1,2, Kadaiya,Daman

Manufacture Part of wind operatedelectricity generators

5. USV limitedH-17,18,20,21 & 22, OIDC,

Mahatma Gandhi UdyogNagar, Dabhel, Daman

Manufacture Pharma centricallyformulation unit capsule &

tablets

6. Kaishan Manufacturing pvtltd., Sr.No.50/4, Kadaiya,village, Bhimpore, Daman

Manufacture Aluminium foil, for foilbased packaging of products

7. Siyaram Silk MilkPlot No.722, Somnath road,ltd, Daman

Manufacture All kind type of textilegarnual

8. Jai corporation Ltd Sr.No.141,Dabhel, Indu. Co-op, society

Ltd, Daman

Manufacture PP/HOP Tap, circular fiatwoven fabric

9. Cello Pens Pvt Ltd.Sr.No.711 to 714 GroundFloor Somnath Dabhel,Daman

Manufacture Plastic component forwriting instrument rentalplastic there mower,vacuum ware house hold

10 Anchor Electrical Pvt Ltd, uniton plot 41/3, behind silverIndu. Estate, Bhimpore,Daman

Manufacture Electrical accessories wire &cable

11. Anchor Electrical Pvt Ltd, unit

on plot 41/3, behind silverIndu. Estate, Bhimpore,Daman

Manufacture Electric energy meter & Part

the of electric accessorieswire & cable

12 Anchor Electrical Pvt Ltd, uniton plot 41/3, behind silverIndu. Estate, Bhimpore,Daman

Manufacture All type fans & Thereof alltype appliance electric

13 Unit Glober Packaging Pvt LtdPlot No.36,37,51,52,53 & 54silver Indu. Estate, Bhimpore,

Daman

Manufacture flexible pack materials insheet/rolls/tubing pouchform


14/67

.12.

14. Sovergin Pharma Pvt. LtdSr.No.46/1 to 4 Kadaiya,Nani Daman

Manufacture drugs medicine sterile waterpar-injection allopathic pharmacortical preparation

15. Cello Plastic Peach

Sr.No.597/2-ADabhel, Daman

Manufacture Plastic moulded articles 140

vacuum waves articlesplastic moulded furnitureplastic thermmowave articles,non-stick cookware, plastictesuh hold articles

16. Perfect Filaments Pvt. Ltd.Plot No.96-A/95-94/70 PanchalUdyog Nagar,Bhimpore, Daman

Manufacture Tartarising yarn P. P. Mate textrinsing of polyester yarn airtartarising and twisting mth.Of synthetics or articlefilaments yarm whether or nottartarised high tenacitymultiple or cable

17. M/s. Kabra bloucesterengineering Ltd.Sr.no.259/1-S, 260/1-6,265/3, coastedHighway, Dunetha, Daman

Manufacture Blow film plant bag on rolls

18. Daman Hospitality Pvt Ltdsr. no. 8/1 &8/1-A, VillageVarkund, Daman

Service Hotel proming houses, campand other loadging places

19. M/s. Tupropes pvt ltdsr.no.597/2(B)Dabhel, Daman

Manufacture All type of Ho PE/PP/NYLON/Pollster Ropes, twines, Nets,& its products all types ofHDPE/PP/NYLONE/PolyesterPopes twines Nets & itsproducts waste

20. Metro PolytheneManufacturers., sr. No.65/3-d-(5), Ringanwada,Daman

Manufacture Multilayer Co-ExtrudedPackaging material Printed,Unprinted i.e. bags, Films, &Lay flat tubing.


15/67

.13.

21. Essel Dispoware Pvt. Ltd.Sr. no. 334/1& 2, 334/14&15, 335/1,2,3& 5,336/1,336/3,& 3-A, 336/5,338/2&4, 341/3,village janivankad, Bhimpore, NaniDaman. Ph. No. 3340059001,

Manufacture Tableware, Kitchenware &Other household articles 7Toilet Articles, of plasticsN.E. C. including mfg. ofvacuum flasks and othervacuum vessels.

22. Anchor electrical Pvt Ltd,Unit-VSr. No.34, Near silver Indu.Estate, Bhimpore, Daman

Manufacture All Type of ElectricalSwitches, electricitydistribution & controlequipment, all type ofsockets ,other misc.Products, Wiring devices &accessories,

23. M/s. Kris Flexi pack (P) Ltd.(Div-Susmit Packing)29A, 29B, Nr.Somnath,Indl.Estate, Dabhel,& Sr. no.370/2/1, Kachigam,Nani Daman 396 210.

Manufacture All Type of Plastic Bags,Rolls, Sheets

24. M/s. Kris Flexi pack (P) Ltd.(U-IV),(Div-Nikita Plast U-II)1.185/5 to9, Panchal Indl.Estate,Bhimpore, Nani Daman 396 2102. (Div-Nikita Plast U-III)43/455, GDDIDC,SomnathIndl. Estate,Dabhel, Nani Daman 396210

Manufacture All Type of Plastic Bags Plain& Printed

25 M/s. Kris Flexi packs (P) Ltd.(U-V),(Div-Kalyan Packaging)360/3, Ground Floor,Shree Ganesh Indl. Estate,Kachigam,Nani Daman 396 210.

Manufacture Packaging Products ofplastic, Poly bags& Rolls


16/67

.14.

26. M/s. Kris Flexipack (P) Ltd.(U-IV),(Div-Jolly Polymer)360/3, 1st. Floor,Shree Ganesh Indl. Estate,

Kachigam,Nani Daman 396 210

Manufacture Packaging Products ofplastic, Poly bags& Rolls

27. Alpha Pharma Daman P. Ltd.,Plot No. 374/1 To 15, AlphaIndl. Park, Athiwad, Dabhel,Daman

Manufacture All Type of Plastic/ PetPerform & bottles Caps, &closers.

28. Kolsite Packaging SystemsLtd.,Sr. No. 259/1, 260/5 &7,261/5 & 130/1, Costal

Highway Dunetha, NaniDaman

Manufacture Polyester Straps,Polyethylene Stretch Film

29. M/s. Amisha Vinyls Pvt. Ltd.,Survey No. 361/6, GaneshIndl. Estate,Kachigam,Nani Daman.

Manufacture PVC Rigid Films and PVCSheeting

30. M/s. Time Techno last Ltd.,(V-VIII),Survey No.371/1, Plot No.6(Part),Kachigam, Nani Daman.

Manufacture Plastic(except house hold)articles for conveyance ofpackaging of goods ofplastic drums, carboys

31. M/s. Time Technoplast Ltd.(V-VII),Survey NO 370/1, Plot No.1,Kachigam.

Manufacture Product of Plastic (excepthouse hold articles forconveyance of packaging ofgoods of plastic drums.Tank and other automotiveproduct Plastic (incl. elaridinsulating fitting of plastic

32. M/s. Time Techno Plast Ltd.(Unit IX)Survey No. 351/1,351/2,Kachigam

Manufacture Plastic Injection IndustrialMachinery Packing of goodsof plastic NEC

33. PN-NJ Industries Pvt. Ltd.,Sr. No.377/1, Plot No.22,Kachigam

Manufacture Plate type oil cooler inaluminium Oil CoolerAluminium Oil Cooler KitAluminium Casting


17/67

.15.

34. M/s. Megaplast PackagingPvt. Ltd.,Sr.597/2/B, Dabhel, NaniDaman.

Manufacture Geomembrane & AlliedProducts

35. M/s Suzlon Global Services

limitedSr.No.248 & 249/2, VillageDabhel,Nani Daman.

Manufacture Nacelle Assembly for wind

Mill

3.5

Major Exportable Item

(1) Plastic Domestic household items.

3.6 Growth Trend

According to the Industrial Entrepreneurship Memoranda (IEM) filed from

Sept.2006 to 2015, Daman has witnessed an investment of INR 30,550.81 In Lakhs. In

Plastic Industries, Cotton Textile, Chemicals and Paper & Paper Pulp Industries sectors.

Plastic & Rubber sector has created the maximum employment generation of almost

12141 people with an investment of INR 37054.75 in Lakhs during 2006-2015 in the

district. Industry sectors such as Textiles, Metal Based (Steel Feb.) and Lathes &

Machine Tools are the supporting pillars of the economy as they provide direct andindirect employment in the district.

3.7

Vendorisation/Ancillarisation of the Industry:

Looking into the requirements of Medium/Large scale industries, following

industries could be considered for establishment in the district:

1. Aluminium Bottles2. HDPE Bottles

3. Aluminium Tin Container

4. Plastic Bottles

5. Hardware like Nuts, Bolts, Washers, Nails etc.

6. Pipes and fittings, Elbow, bend

7. Polythene Bags

8. Oil Seeds


18/67

.16.

9. Oil Cake

10. Caustic Soda

11. Salt

12. Jute Bags13. Phenyl, Tiles, Cleaners, Acids

14. Stationery items like Box/Flat Files, Xerox paper, pens etc.

15. Plywood

16. Oil seals, O Rings, Rubber Parts

17. Phosphoric acid

18. Wire Ropes and other Lifting Mater

19. Carbon

20. Hexane

21. Engineering Workshop for mould making.

3.8 Medium Scale Enterprises

Industrial units which are engaged in manufacturing and having investment

in plant & machinery more than 5 Crores but not exceeding Rs. 10 Crore are

classified as medium scale manufacturing enterprises. An Entrepreneur or a

company desirous to set up a medium scale project needs an approval in the form

of EM Part-I or EM Part-II from District Industries Center, Government of Gujarat

(GoG) of respective District Head quarter working under State Directorate of

Industries, Govt. Of Gujarat.

In the case of setting up of an Export Oriented Unit (EOU) or setting up a

project in Special Economic Zone (SEZ), a Letter of Permission (LoP) is required to

be obtained from the Development Commissioner of the concerned SEZ. Thus,the procedure for setting up a large industrial unit would be either filing of IEM,

obtaining Letter of Intent (LOI)/ Industrial License or obtaining Letter of Permission

(LoP) in the case of 100% EOU or SEZ unit. There are 60 Medium scale industries

operating in the district, amongst which Textile, Plastic and Rubber, Pharmacy,

food products and non-metallic minerals products are the significant sectors in the

Medium scale.


19/67

.17.

Sr.No

Name and Address Category Products

1. Mipak Polymers Ltd, unitI plot no. B-7, OIDC,udyog nagar, ind.Estate,Riganwada, Daman

Manufacturing HDPE thermoplasticcontainers

2. Mipak Polyners Ltd, unitII plot no. G. 10, ODIC,udyog nagar, ind.Estate, Riganwada,

Daman

Manufacturing HDPE plastic container LDPplastic containers, PVCcontaners

3. Narendra Plastic Pvt.Ltd,Sr. No. 436/1 & 2,behind Dabhel checkpost, Dabhel, Daman

Manufacturing all type of plastic tubing rol,sheets & bags, packagingmatiarial, plastic colouringgranuls master batches,bopp film tape

4. Indo Poly Rayons Ltd.Sr. no. 372/5, 6, 7, plotno. 12,12,15 & sr. no.373/3 (16), Dabhel

Manufacturing Textured Polyester yarn

5. Bhilad, Textile Pvt. Ltd.92, 93 A, Kadaiya nestto Dalwada sub station ,Nani Daman

Manufacturing Headliner of automobiles,nonwoven filter bags, nonwoven fabric felts

6. Collar Pack Pvt. Ltd.Gala no. sr. no. 57/ (19)Dunetha, Bheslore,daman

Manufacturing PVC fils, long colloarsuppory (palti)butter fly,collar banes, tongul cleaner,plec tr uns insulation boxes,Pvc, boxes, pvc supportstraps, buttons, buttonblans

7. Cancled8. Wockhardt Limited

(unit) 106/4-5-7 Damanind. Estat Kadaiya,Dmaan

Manufacturing Pharma formulationPharmaceutical prod.


20/67

.18.

9. Wockhardt Ltd.Unit (I) 87/A, silver indestate Bhimpore,Daman

Manufacturing Pharma formulationpharmaceutical productsprednisolone tab, temuxitentab. At ropine sulphate tab.Colchime tab. Cipotrone

acitate tan. Norethis, teronetab, clomitehe tab.10 Pyramid Plastic

Plot No. 377/1/1 & 2behind store quarryKachigam char rasta,Daman

Manufacturing Manufacture of plasticproducts moulded plasticarticle containers bathware, chapping board tableware flask, kitchen wareindustrial plastic product.

11 Ronch Polymer Pvt. Ltd.Sr. No. 179/3 & 181/2,Buld. No. 3, Panchal

udyog nagar bhimporeDaman

Manufacturing Plastic injection and blowmoulded parts for indl &home app, part in home

water parifion systems,gartridge carbon tra,bomnded sceverngrer,compadedr betry

12 Cello plastic products,Pvt. Ltd,Sr. No. 685/1-A 1stfloor, cello householdcompaund, somnathroad Dabhel, Daman

Manufacturing Plastic house hold industrialarticals thermware &vacumwave items, plasticmolded pen , ball penfountain pen, roller pens.Nips, reffel & otherstationery intems electricalswitch other

13 Cello statinery productPvt. Ltd.Sr. No. 717/1,2,3Somnath road, DabhelDaman

Manufacturing Ball point pens, Rolex pensGEC pens, refills, fountainpens, stylogradh pen,profiling pens, glue sticks,all type of stationerymarkers, other writinginstrial spare parts,accessories of pens & pencilincluding

14 Cello writinginstruments &containers, Pvt. Ltd. PlotNo. D-7 OIDC,Riganwada, Daman

Manufacturing Pens ball pen, pet,containers drums mibsrefilling, thermo warearticle & vaccumware

15 Cello pens & stationeryPvt. Ltd. Plot No. D-16OIDC, Riganwada,Daman

Manufacturing Pen ball pen nibs refilling


21/67

.19.

16 Sahajanand MedicalTechologies Pvt Ltd. Plotno. 168/96, 1st floorDabhel in. co-op soc.Ltd. Dabhel Daman

Manufacturing other artificial parts of thebody coronary stents

17 Pentek Pen & StationarySr. No. 327/2,3 & 7 A.1st floor, Kachigamchala. Raod, Daman

Manufacturing Plastic house hold &industrial articles thermoware & vacuum rearticals,plastic moulded parts,reprocessed powder pensball pens writinginstruments pens, nibsrefills, other stationeryitems

18 Kandol fabric Pvt. Ltd,plot no. 375/8, villageKachigam, Daman

Manufacturing Plastic packaging materialHDPE/PP circular, wolver,laminated bag, sacks jumbobags. HDPE PP tarpaulinboxed cased crate & similararticles HDPE PP multi wavPater

19 D.K. Plastic industriesA2- 17-18, 35-AGDDIDC, Somnath roadsomnath, Daman

Manufacturing PVC compound & cable pvcpipes & fittings PVC casingcoping & fitting eprcompound & master Bachpvc master batch

20 Indo Japan PenManufacturing Co PvtLtd.Sr. No. 377/1, Plot no19 & 21, Zari Causwayroad Kachigam Daman

Manufacturing writing instrumentsproducts all kind of writinginstruments & parts

21 Indo Built StorageSystem Pvt. Ltd.Sr. No. 65/3 -DRiganwada KachigamDaman

Manufacturing storage packaging systemsother related commentsiron racks, mezzanine floor,cable trays

22 Temple Packaging Pvt.Ltd.Sr. no. 171/3 & 171/7behind olive heath carehatiyawad, Dabhel,Daman

Manufacturing Packaging products printedcartons printed labours


22/67

.20.

23 Prima Plastic Ltd98/4,6,7, Daman ind.Estate, Kadaiya, airportroad, Daman

Manufacturing Injection moulded article &aluminium products plasticmoulded furniturealuminium composite panelall of aluminium of

aluminium sheets bondedwith plastic plast, panelscoils toil, strips, aluminiumsheet panel coil & otherallied product

24 Uniglobe Packaging Pvt.LtdSr. No. 50/3, Plot No, 36silver ind. Estate,Bhimpore, Daman

Manufacturing Flexible packaging materialplastic bags, plastic films &sheets, plastic lay flattubing

25 Emerson Process

Manugement (I) Pvt.Ltd.82, Panchal udyognagar, Bhimpore,daman

Manufacturing Engineering process

controlling stumnent

26 Parksons Games &Sports,13/11 Shakti Ind. EstaeRiganwada, Daman

Manufacturing Playing card printing &allied active tied & alliedn.e.c. manufacture of cardboard boxes, othercontainers & boxes of paperor paper board n.e.c. mfg ofother paper & paper boardarticles n.e.c. manufactureof sports, and other athleticgoods n.e.c

27 Sipra Remedis Pvt. Ltd.688/4, SiddhivinayakInd. Estate, somnathDaman

Manufacturing Inject able I.V. fluidsinject able E.V. Fluids

28 Strta Geosystems IndiaPvt. Ltd.Sr. No. 62,64, silver ind.Estate, patalia road,Bhimpore, Daman

Manufacturing Geogrid

29 Givaudan India Pvt. Ltd,Plot No. 168/30 villageDabhel Daman

Manufacturing Mixture of odoriferoussubstance

30 Rishabder Tecnocableltd.Sr. No. T30/1 & 4 731/1Riganwada, Daman

Manufacturing Wire & Cable electricalcable, instrument cable,telephone cable, specialelectronic cable, processcontrol cable


23/67

.21.

31 Goldseal SargummiIndia Pvt. Lts.Bhimpore, Daman

Manufacturing extrusion rubber profilerubber products

32 Polyole Fibres Pvt Ltd.Sr. No. 146, Dabhel,

Daman

Manufacturing Polyester staple fibre

33 PVC Converters IndiaPvt. Ltd.Plot No, 60,61 & 72panchaludyog nagar,Bhimpore, Daman

Manufacturing Plastic packaging ind.Plastic tubing/rolls/sheets.Plain & printed reprocessingof all kind polymerscompound, lamination ofpvc,cloth

34 Lexi Pvt.ltd.No. 201/4A, (25) & (24)Hingraj Ind Estatopp. Olive health care

Dabhel, Daman

Manufacturing writing instruments,injection moulded plasticcomponent, plastic ballpens, raffles & other

stationary articles35 Lexi Pvt ltd.Sr. No. 14& 15, Goa IDCInd Estate, Somnathroad, Dabhel, daman

Manufacturing writing instruments,injection moulded plasticcomponent, plastic ballpens, riffles & otherstationary articles

36 Balaji Filament ltd.Sr. No. 24/1 A & 2A,plot no. A/1 & A/2,OIDC, Riganwada,Daman

Manufacturing Tektites Products,Tartarised/ twisted yarnspun yarn knitted wovengray fabrics

37 Jalaram Wire Pvt. Ltd,Plot No. 31,32,33,36,37,Bharat ind estate,Bhimpore Daman

Manufacturing wire Products, coper &aluminium, nameld windingwire

38 HI- Tech office systems,G-7 & 18 OIDC udyognagar RiganwadaDaman

Manufacturing False flouring component &its accessories

39 Jyoti plastic works Pvt.Ltd.,Panchal Indl. Estate,

Bhimpore, Daman

Manufacturing Parts of SubmersiblePumps, Water Purifier, Windmill & other Plastic Products

40 Flair pen & PlasticIndustries,Sr. No. 377/1, Plot no.19&21, Kachigam,Daman

Manufacturing All Kind of WritingInstruments & Packagingmaterials

41 Aristo Exports,Sr. No. 45/2-8,VapiDaman Main Road,Dabhel, Daman

Manufacturing Plastic Household Article


24/67

.22.

42 Propack Industries,Sr. No. 376/2(11 & 12),&375/11, zari CausewayRoad, Kachigam, Daman

Manufacturing Plastic Polyethylene-tunings, rolls, film , Scrap &Extrusions

43 Platinum Synthetics P.

Ltd,193/1, Nr. Panchal Indl.Estate, Bhimpore,Daman

Manufacturing Manufacture of Textile

Product, Polyester Ploy(Practically oriented yarn,Polyester Textured Yarn/Rotor Yarn.

44 Mudra Lifestyle Ltd.,Sr. No. 168/12, 12-A, &234, Dabhel Indl. Co.Op. Soc. Ltd., Dabhel,Daman

Manufacturing silk Fabrics cotton Fabrics,Synthetics Fabrics,Synthetic Knitted Fabrics

45 Fancy Fittings Pvt. Ltd.U-III,

(formally M/s. ApekshaPlastic Products Pvt.Ltd.,E-1, to E-4, Sr. No.55/3, 55/3-A, 55/3-3&55/4, Behind SomnathFirebrigade,Ringanwada, dabhel,Daman

Manufacturing Fasteners & fitting of allKind of Plastic, Moulded &

Extruded Item all Kind ofPlastic , Luggage TrimmingPlastic hanger, Toys

46 Icon Polymers P.L.T., Sr.No.261/3,4,5,8 251/2,Dabhel, Daman

Manufacturing Plastic Carry Bags, HDPE/LDPE, Super Market Bags &All types of Packaging Bags

47 Amrapali PlasticIndustries,Sr.No.590, 591/1, 592,Opp. Golden IndustrialDabhel, Daman

Manufacturing Bakelite handle and knobsCocker Bracket, Ring BeamHandles and Gasket.

48 Supreme EmbroideryPvt. Ltd.,Sr. no.143/ FGH,dabhel, daman

Manufacturing Embrodiery Fabric, Laces,Cotton Fabric

49 Firmenich AromaticsIndia Pvt. Ltd.,Sr. No. 57/3, 4 &5,Dunetha, Daman

Manufacturing Industrial Perfumes &Flowers

50 Cummins Exhaust IndiaLtd,Sr. No. 74/3,4, Patr-I,Kadaiya, Nami Daman

Manufacturing Silencer


25/67

.23.

51 Amar Remediese,Sr. No. 375/14, Hill Indl.Area, Kachigam, Daman

Manufacturing Tooth paste & Tooth PowderOintment Shampoo Talcpowder tablets creamlotion

52 P.V.N. Tex Industries,

Sr. No. 222,223/1,Dabhel, Daman

Manufacturing HDPE/PP/CIRCULAR, Woven

Laminated, Un laminated,Fabrics, Cut Pieces, BagsSack, Jumbo Bag,Trampoline

53 PVN Fabrics, sr.No.335/2-B,336/2,337/1, Bhimpore,Daman

Manufacturing HDPE/PP/CIRCULAR, WovenLaminated, Un laminated,Fabrics, Cut Pieces, BagsSack, Jumbo Bag,

54 Daman GangaInvestments Pvt. Ltd.,sr. no.271-A, Panchal

Udyog Nagar,Bhimpore,Daman

Manufacturing HDPE/PP/CIRCULAR, WovenLaminated, Un laminated,Fabrics, Cut Pieces, Bags

Sack, Jumbo Bag,Trampoline55 NLMK India Services

Centre Pvt. Ltd.Plot No. H/1-2, OIDC,Dabhel

Manufacturing HDPE/PP/CIRCULAR, WovenLaminated, Un laminated,Fabrics, Cut Pieces, BagsSack, Jumbo Bag,Trampoline

56 M/s. Varj PackagingPvt.Ltd.Sr. No.71/1,70//2-c,24/5, Village Kadaiya,

Nani Daman.

Manufacturing )PP/HDPE woven sacks2)HDPE fabric laminatedpaper, bag, tube 3) paperbags

57 M/s.Vama Woven FabPvt. Ltd.Sr.No.162/4,6,7,9,Bhimpore, Nani Daman.

Manufacturing 1) PP /HDPE Wovensacks,2)Fabrics

58 M/s Ginza Industrieslimited,Plot No 6,8,9, UnityIndustrial Copmlex,Chala DamanKachigasm, NaniDaman.

Manufacturing Narrow Woven Fabric

60 M/s Mega PlastPackaging P. Ltd,Survey No.57/43(3) &57/4 (3 A), BhensloreDunetha, Nani Daman,

Manufacturing (1) Plastic Carry Bags, (2)HM HDPE/LLDPE Bags (3)Plastic Bags

61 M/s Bhim PolyfabIndustries, (Unit-III)Sr.No.136/1,2,3, 137/1138/1 135/B-C, 136/3-B, 137/1-B, 138/4,5,6,Dabhel Nani daman.

Manufacturing HDPE/PP wovenfabrics/Bags/ sockslaminated/coated/ uncoated/unlaminated


26/67

.24.

3.8.1

List of the units in Daman -----& Near By Area

As above

3.8.2 Major Exportable item

Plastic house hold item

3.9 Service Enterprises:

Government of Gujarat has implemented Industrial Policy 2009 in collaboration with

District Industries situated in all the district of the State. DIC at Daman extends financial

support to the existing service sector engaged in Tailoring service (with electric

motors\manual machines), Embroidery work, Washing and ironing of clothes, Beauty

parlour, Transport services, Wiring & Plumbing services, Auto repairing, Painting of

signboards and hoardings, Air-conditioners and refrigerators repairing, Cobbler services,

Consumer electronic appliances, Armature & motor rewinding, Book binding & spiral

binding, vulcanizing of tyres and tubes, Agriculture machinery & equipments repairing,

Catering, Hair cutting services, decorators, Cyber caf, Currier service, Private Coaching

classes engaged in preparing skilled persons etc. at micro level to the people in the

district.

3.9.2 Potentials areas for service industry

The potential areas for Service Industry can be further classified into various groups such as

Sr. No.Description NIC- 2004 Code

1 Xerox Centre 74993

2 Computer Job Work & Training Centre 723003 Cyber Caf, Network, E-mail Service, InternetService

72901

4 Mobile Phone Service 642025 Courier Service 641206 Automobile Spares, Service and Repairs 504047 Video Library 923128 Circulating Library 923129 Coaching Classes 8090210 Beauty Parlours 93020


27/67

.25.

11 Flour Mills 1531112 Repairing of Electrical & Electronic Equipments 5260313 Steel Fabrication 2811214 Electric Motor Repairing 3110815 Laundry and Dry Cleaning 93010

16 Caterers and Decorators 5520417 Fast Food and Snack Parlour 5520918 Ice Cream Parlour 5520619 Pathology Laboratory 8519520 Pest Control 7493021 Provision Stores 5211022 Stationery Stores 5239623 Tailoring Shop 1810524 Advertising Agency 7430025 Installation and Operation of Cable Network 64204

3.10 Potential for New MSMEs:

(A) Resource Based Industries:

* Agro Based Industries:

Sr.No.

Description NIC- 2004 Code

1 Bakery 154192 Surgical Cotton 242363 Flour Mill 153114 Mini oil Mill 154935 Rice Mill 153126 Pickles 151257 Roasted and Salted Groundnut 153148 Cattle Feed 153319 Poultry & Fish Feed 1533210 Papad Making 1549611 Fruit Preservation and Processing 15139

12 Milk and Milk Products 0121113 Banana Wafer unit 1513914 Cotton Ginning 0140515 Cotton Seed Oil 15142


28/67

.26.

Live Stock Based Industries:

Sr. No. Description NIC- 2004 Code

1 Leather footwear and Leather goods 192012 Bone Meal 151323 Leather Decorative items 191224 Garments and Sports Goods 181055 Leather Bags and purse 191226 Wood Works 202997 Leather Tanning 191128 Dairy 15209

Forest Based industries :

Sr.No.

Description NIC- 2004Code

1 Manufacture of furniture & fixtures made of wood,cane & reed

36101

2 Manufacture of photo frame and other furniture &fixtures n.e.c.

36109

3 Manufacture of carrom boards and tables forbilliards, table tennis and other parlour games

36931

4 Manufacture of rackets for badminton, lawn tennis,table tennis etc.

36933

5 Manufacture of athletic/gymnasium articles andequipment 36935

6 Manufacture of wooden toys, decoration piecesandwooden lamp stand etc. [including carved woodarticles and articles made from coconut shells]

36942

Plastic Industries:

Sl.

No.

Description NIC 2004 Code

1 Nylon Monofilament Yarn 17114

2 Fishing Nets 17235

3 LDPE/HDPE Film Bags, Polythyne bags, etc. 25204

4 Injection Moulded items 25206

5 Storage Water Tanks 25209

6 PVC Doors & Windows 25209

7 Surgical & Industrial Gloves 33115

8 Rigid Polythene Pipes 25209

9 Electrical & Electronics Accessories & Parts 25209

10 Plastic toys 36941


29/67

.27.

Pharmaceuticals:

Sl. No. Description NIC 2004 Code

1 Pharmaceutical Tablets 24231

2 Metrodazole Bulk Drig 24231

3 Ayurvedic Medicines 24233

4 Metronidazole Bulk Drug 24232

5 Chloroquin Diphosphate 24119

Electronics Items:


1 Uninterrupted Power Supply (UPS) 31200

2 SSB Modulators for Cable T V 31300

3 Quartz Wall Clock 331014 Electronic Gas Lighters 31901

5 Torch Lights 31506

Electrical Engineering Items


1 Submersible Pumps 29121

2 Metal Boxes & Metal Tanks for PowerTransformers 29295

3 Power Transformers 311014 Diesel Generator Sets 31103

5 PVC Cable & Wires 31300

6 Electric Chocks 31506

7 Tube Light Metal Fixtures 31109

8 Auto Electric Horn 31907

Chemicals & Allied Products:

Sl.No. Description NIC 2004 Code

1 Aluminum Chloride 24117

2 Di-Phenyl Oxide (DPO) 24119

3 Tartaric Acid 24116

4 Sodium Bisulphate 24117

5 Soft Drink Concentrates 24293

6 Vinyl Sulphate 24119

7 Synthetic Iron Oxide 24113

8 Biphenyl-A 24119

9 Bon Acid 24116


30/67

.28.

Mechanical based Items:

Sl.No. Description NIC 2004 Code

1 MS Wire mesh 27182

2 Industrial Valves & Pressure Gauges 29121

3 Reduction Gear Boxes 291314 Automobile Springs, Coil Spring 29121

5 Metallic Filters for Industrial Use 28999

6 Piston Rings 29121

7 Ball Bearings 29131

8 Air & Gas Compressors 29121

9 Refrigeration & Air conditioning Equipments 29303

10 Steel Rolling Mills 29243

11 Water Coolers 29306

12 Injection Moulding Machine 2929513 Dry Cell Batteries & Storage Batteries 31404

14 Executive & Conference Chairs 36102

Agricultural Implements:

The major Agriculture implements based industries are as given below:


1 Harvester 29110

2 Dusters 29211

3 Cutting Machines 29211

4 Ploughs 29212

5 Tractor 29211

6 Light Agriculture Machinery 29212

(B) Demand Based Industries:

Sr. No. Description NIC- 2004 Code

1 Tyre retreading 25114

2 Exercise Notebook 21099

3 Corrugated paper Boxes 21023

4 PVC Conduit Pipes 25209

5 Voltage Stabilizer 31200

6 Sprayers and Dusters 29219

7 Readymade Garments 18101


31/67

.29.

4 Existing Clusters of Micro & Small Enterprise

NIL

4.4

Detail of Major Cluster Nil

4.5 Manufacturing Sector- Nil

4.6 Service Sector- Nil

4.7 Details for identified cluster

1. Hospitality sector in Daman is highly potential area for tourism. UT

Administration of Daman and Diu via its official Gazette No.

DNU/TOUR/D/13/434 dtd. 26.09.1995

Declared TOURISM as an industry. As on 31.03.2015, there are about 93

hotels and lodges with total 4272 nos. of beds and 11, 44,140 tourists visited

Daman.

2. There is a potential to establish artisan cluster for Plastic Products.

5 General issues raised by industry association during the course of

meeting

Testing Laboratory should be set up to test the products / material Shortage

and irregular supply of power, lack of working capital funds, scarce raw materials

and shortage of skilled labour force are some of the problems faced by the

MSE.Units. Major constraint faced by GIDC Estates is water shortage. Availabilityof potable water and water for industrial use poses a problem.


32/67

.30.

Action Plan for MSME Schemes during 2015-16

S.No. Name of the Scheme Proposed activity on thescheme

1 MSE-CDP -2 ISO-9000 / 14000 / HACCP

ReimbursementAdvised Industry Associationto get benefit of reimbursementof ISO-9000/14000

3 MSE-MDA -

4 CLCSS

5 Capacity Building & strengtheningof data base

-

6 International cooperation -

7 TREAD for Women -

8 VDP -

9 National awards

10 NMCP Schemes

I. Lean Manufacturing -

II.Design Clinic -

III.Market assistance & Tech.Up gradation

Advised unit to get regd. WithNSIC Ltd TO GRT Govt. order.

IV.QMS/QTT -

V. Tech. & Quality upGradation support

VI.

ICT -

VII. Bar Code -

VIII. IPR -

IX. Incubator scheme -


33/67

.31.

1.

STEPS TO SET UP MSMES

Following are the brief description of different agencies for renderingassistance to the entrepreneurs.

S. No. Type of assistance Name and address of agencies1 Provisional Registration

Certificate(EM-I) & Permanent RegistrationCertificate (EM-II)

District Industries CentreMoti DamanDaman

2 Identification of Project Profiles,Techno economic and managerialConsultancy services, marketsurvey and economic surveyreports.

DIC , Br. MSME DIMasat Silvassa

3 Land and Industrial shed OIDC Ltd. Near GurukripaHotel Somnath Indl. EstateDaman Goa Indl.Development Corp. OPP-Gurukripa Hotel Nani DamanDaman

4 Financial Assistance Banks SBI Lead BankNani Daman , SIDBI GIDC

Vapi5 For raw materials under Govt.

SupplyNSIC ltd Silvassa

6 Plant and machinery under hire/Purchase basis

NSIC LTD. Silvassa

7 Power / Electricity Electricity Dept.

8 Technical Know how. Br. MSME DI Silvassa

9 Quality & Standard BIS Mumbai , MSME TCMumbaiNTH Mumbai

10 Marketing / Export Assistance NSI C Ltd. Silvassa ExportPromotion Council Mumbai

11 Other Promotional Agencies


34/67

.32.

STEPS TO SET UP A MICRO, SMALL OR MEDIUM ENTERPRISE

The important aspects are as given below:

(1) Selection of proper Project

(2) Selection of appropriate Technology & Machinery

(3)

Feasible Planning for getting finance(4) Conceptualization of Basic Infrastructure: erecting of factory building,

arrangement of necessary connection such as Power, Sewerage and

Communication etc., Labour and Personnel, Procurement of Raw Material.

(5) Filling of Enterprise Memorandum Part II with respective District

Industries Center of the district.

(6) Sanction of Approvals such Regulatory, taxation, Environmental

clearance in certain products etc.

(7)

Registration of Quality Certification

General Information:

Micro, Small & Medium enterprises are classified in terms of investment in Plant &

Machinery under MSMED Act 2006. Further, the MSME sector is mainly divided into

two major segments namely: Manufacturing and Service Sector.

Terminology of MSME Manufacturing Enterprises as per investment in Plant &

Machinery is as under:

Micro Enterprise:Investment up to Rs.25 Lacs.

Small Enterprise:Investment more than Rs. 25 Lacs & up to Rs. 5 Crores.Medium Enterprise:Investment more than Rs. 5 Crores & up to Rs. 10 Crores.

Terminology of MSME Service Enterprises as per investment in Plant & Machinery is

as under:

Micro Enterprise:Investment up to Rs. 10 Lacs.

Small Enterprise:Investment more than Rs. 10 Lacs & up to Rs. 2 Crores.

Medium Enterprise:Investment more than Rs. 2 Crores & up to Rs. 5 Crores.

(1)Selection of proper Project:

Idea emerging out from the bottom of the heart coupled with risk taking ability, self

inspiration, liking and adventurous nature can tremendously help to become an

entrepreneur.

Idea concrete determination involves viability of business, knowledge of clientele

need, market research, prosperity of growth and long term sustainability to run the

industry for log period, conceptualization of project.

Further to complete the process, one need to have basic knowledge about vivid

aspects such as


35/67

.33.

Product: Nature, Characteristic, size and usefulness of the ultimate consumers.

Process: Use of Technology involved for the production of the Item.

Location:

Location with complete infrastructure facilities is most important part as it gives the

viability, logistics for input and marketing of finished products at economy ratewhich ultimately may result into higher production, minimization of waste, decrease

in ex-factory value, increase in productivity and profit.

Finalisation of Product:

Product Line:width, depth and characteristics

Packaging:Dazzling and user friendly

Branding:Eye cache and booster advertisement

Warranties:

Extending Warranties to the consumers to win their satisfaction and feasibility of

consistent consumption of the product offered to them.

After Sale Service:

Proper cell should be established for extending after sales service to the ultimate

consumers to win their trust.

(2) Selection of appropriate Technology & Machinery

Need arise under this Head is as follow:

Search for suitable Project Profiles

Search for proper Product Code

Search of Industry Clusters

Search for getting information of existing Manufacturers

(A) Selection of Process:

As the product is finalized, the choice for selecting proper technology arises.

Sometimes for complex nature of product, process of know how becomes necessary

to import it. So, one should make agreements of technology transfer as a safe

guarding means of interest. One can also contact CSIR (Centre for Scientific &

Industrial Research) and DRL (Defence Research Labs) for bringing into the

indigenous technology, which can give intrinsic benefits of economy and proper

choice of technology.

Aspects to be considered are:

Whether process involves highly skilled labour or complex machinery is required?

Whether large quantity of water and power is required or not?

Whether the Patent of Product is required or not using the selected process

technology.


36/67

.34.

Requirement of any Certificate of Pollution control or maintaining the

environmental regulations.

Whether the Machinery and Equipments are capable for inculcating

consistent production in Indian environment?

One of the Major constraints in the Indian MSMEs is usage of outdated

technology and Management Methods which results in inefficiency, low

productivity and decrease in profitability of an enterprise. Lack of finance at

low or affordable interest rate is also one of the major causes for not

adopting modern Machinery, Equipments and Technology of production.

Agreement with NSIC for Hire Purchase of Machinery:

If an entrepreneur is capable of purchasing Machinery from own capital, he

may contact NSIC for hire purchase of machinery. One should apply to NSIC,

Head Office through the DIC of the respective district.

Acceptance Committee comprising of the Representatives of Chief Controller

of Imports, Development Commissioner MSME and other concerned

departments verifies all the applications for hire purchase of indigenous or

imported machinery.

As soon as these formalities are completed by the hirer, instructions are

sent to the suppliers to dispatch the consignment and sent the R\Rs or

C\R as the case may; to the Regional Office.

After ensuring all dues have been paid by the hirer, releases the R\R of C\R

to for receiving delivery of the machinery.

In case of imported machines, the procedure is slightly different in as much

as the shipping documents are sent to the clearing agents for clearing the

consignment from the Customs and dispatching it to the hirer.

Value of machines that can be supplied

Rs. 7.5 Lacs, F.O.R. or landed cost as the case may be Earnest Money

As per guidelines of RBI to the Banking and Financial Sectors in force.

Administrative Charge

As per guidelines in force.

Period of Repayment

The value of the machines, after deducting the earnest money received,

called the Balance Value, is payable along with interest and administrative

charge as per the terms & conditions signed by the applicant under the

guidelines in force.


37/67

.35.

Gestation Period

In case of certain type of machines which become operative immediately on

installation in the service sector industries and job order establishment, a gestation

period of only 6 months shall be allowed both to the new and existing units.

Now the Place and Right Partner has to be selected and Project Report has to be

prepared.

(3) Feasible Planning for getting finance

No MSME Enterprise can run without financial support.

The requirements can be classifies as given below:

Long & Medium Term Financial requirements

Short Term or Working Capital Requirements

Risk Coverage Capital Seed Capital\Margin Money Requirements

Bridging of Loan

Financial Institutions are working in each district of the State as mentioned

below:

Nationalised and Private Commercial Banks, Regional Rural Banks or Co-operative

Banks.

Small Industries Development Bank of India (SIDBI) (For refinance and direct

lending)

Gujarat State Finance Corporation (GSFC)

SIDBI, GSFC and other State Industrial Development Corporations extend financial

support for Long and Medium term loan, for the purposes such as Purchase of Land,

Construction of building or shed, and purchase of machinery and equipments.

The Short Term Loans are extended by the Commercial banks for Working capital

requirements, finance required for the purchase of raw material, payment of wages

and to meet the operating expenses. The commercial banks also sanction composite

loan comprising of working capital and term loan up to a loan limit of Rs.1 crore.

Requirement to be fulfilled for getting the laon from the Commercial Banks orFinancial Institutions are as under:

Properly filled up application

Proper documentation

Attach copy of 3consecutive three years Profit and P & L A\c Income Tax Assessment Certificates of Partners/Directors

Proof of Possession of Land/Building

Architects estimate for construction cost Partnership deed/Memorandum and Articles of Associations of Company

Project Report

Budgetary Quotations of Plant and Machinery


38/67

.36.

After assessment of application, bank issued a letter of sanction or rejection to the

applicant. Then, applicant has to submit a letter of accepting the sanction by accepting

the terms & conditions laid down by the Bank or Financial Institution.

Subsequently, loan is disbursed according to the phased implementation of theproject. Some entrepreneurs choose the other option available in the modern era is of

venture capital funds and non-government finance companies.

Conceptualization of Basic Infrastructure:

Construction of Building:

Selection of negotiable plot of land is the significant task for the entrepreneur, it

follows by proper construction of factory building, proper designing of factory lay out,

interior and setting up of Plant & machinery.

Getting the Utility Connections

As soon as, the process of construction of factory building starts, entrepreneurs must

have follow for the sanction of water , sanitation and appropriate power connection

either LT (Low Tension) or HT (High-tension) type diligently. If connected load is up

to 75 HP, LT connection is provided. For connected loads of 130 HP or higher only HT

connection is provided.

A formal application needs to be made in a specified form to the state electricityboard. An electrical inspector is deputed for evaluation of application to factory site,

after which the load is sanctioned. In areas of power shortage, it is advisable to

augment the power supply with a captive generating set.

Getting 3Ms Right:

MEN:

Projections for manpower and staffing are made in the project report. However it is

necessary to time the induction of manpower in a planned manner. The engineersand operatives must be available before the installation of the machinery

MACHINERY:

Choosing and ordering of right machinery is also of paramount importance. In many

cases technology or process provides us with specifications which is not provided,

then an extensive techno-economic survey of machinery and equipment available

must be carried out. International trade fairs and engineering fairs are good places to

look at available options. The entrepreneur must also consult experts, dealers /

suppliers as well as users, prior to making a selection of equipment and machinery.

The advice of DIC, MSME-DI and NSIC can also be sought.


39/67

.37.

MATERIALS:

Materials procurement and planning are critical to success, of a start-up with a MSME

unit. Inventory management can lead to manageable cash flow situations; otherwise if

too much is ordered too soon considerable amount of working capital gets locked up.On the other hand, non-availability may result in production hold-ups, and idle

machine and manpower. For essential imported raw material whose lead-time is large

proper planning is all the more essential.

(8) Filling of Enterprise Memorandum Part II with respective District

Industries Center of the district.

Section 8 of theMicro, Small and Medium Enterprises Development (MSMED)

Act, 2006provides for filing of memorandum by a Micro, Small or Medium

Enterprise. Sub-section (2) of section 8 stipulates that the form of the Memorandum,

the procedure of its filing and other matters incidental thereto shall be such

as notifiedby the Central Government.

The memorandum may be filed by all three categories of enterprises with the

District Industries Centre in the jurisdiction of which the enterprise is (or, is

proposed to be) located,

The procedure for filing it has been outlined in Schedule. II of theNotification for

the format of EM,

Features of the Scheme

The memorandum may be filed by all three categories of enterprises with the

District Industries Centre in the jurisdiction of which the enterprise is (or, is

proposed to be) located,

The procedure for filing it has been outlined in Schedule. II of the Notification for

the format of EM

Procedure for Filing Memoranda

Features of the present procedures are as follows:

Form of the Entrepreneurs Memorandum can be downloaded from the Internet, the

address of which can be obtained from Directorate dealing with Micro, Small &

Medium Enterprises of the State Governments/ UTs. or the hard copies of the

same can be obtained from the District Industries Centers. This form can also be

downloaded from the SIDO website i.e. www.laghu-udyog.com or

www.dcmsme.gov.in
http://dcmsme.gov.in/publications/MSMED.htmhttp://dcmsme.gov.in/publications/MSMED.htmhttp://dcmsme.gov.in/publications/MSMED.htmhttp://dcmsme.gov.in/publications/MSMED.htmhttp://dcmsme.gov.in/publications/circulars/GazNot/ammended_EM.pdfhttp://dcmsme.gov.in/publications/circulars/GazNot/ammended_EM.pdfhttp://dcmsme.gov.in/publications/circulars/GazNot/ammended_EM.pdfhttp://dcmsme.gov.in/publications/circulars/GazNot/ammended_EM.pdfhttp://dcmsme.gov.in/publications/circulars/GazNot/ammended_EM.pdfhttp://www.dcmsme.gov.in/http://www.dcmsme.gov.in/http://www.dcmsme.gov.in/http://dcmsme.gov.in/publications/circulars/GazNot/ammended_EM.pdfhttp://dcmsme.gov.in/publications/circulars/GazNot/ammended_EM.pdfhttp://dcmsme.gov.in/publications/circulars/GazNot/ammended_EM.pdfhttp://dcmsme.gov.in/publications/MSMED.htmhttp://dcmsme.gov.in/publications/MSMED.htmhttp://dcmsme.gov.in/publications/MSMED.htm


40/67

.38.

Any person who intends to establish a micro or small enterprise, at his discretion;

or a medium enterprise engaged in providing or rendering of services may, at his

discretion or a medium enterprise engaged in the manufacture or production of

goods shall file the Memorandum of Micro, Small or as the case may be, of

Medium Enterprise with District Industries Centre of its area.

The District Industries Centre shall fill all the codes in the form of the Memorandum

and issue an acknowledgement after allotting an EM number, date of issue and

category of the unit within five days of the receipt of the form of Memorandum by

post or same day, if the form of Memorandum is submitted in person as well as

online.

Before issuing the acknowledgement, the District Industries Centers shall make

sure that the form is complete in all respect and particularly the form is signed

and is accompanied with an undertaking, which is a part of the form ofEntrepreneurs Memorandum.

The District Industries Centre shall maintain record of all the Entrepreneurs

Memorandum so filed in respect of micro and small enterprises and medium

enterprises engaged in providing and rendering services. District Industries

Centres shall forward a copy of the Entrepreneurs Memorandum so filed with EM

number allotted to the Small Industries Service Institutes of their

State/Jurisdiction.

The District Industries Centre shall maintain record of all the EntrepreneursMemorandum so filed in respect of medium enterprises engaged in

production/manufacturing of products and forward one copy each of the

Entrepreneurs Memorandum with EM number allotted to Small Industries Service

Institutes of their State/Jurisdiction and to Joint Development Commissioner

(MSME Pol.) in the Office of the Development Commissioner (Small Scale

Industries).

The form of Memorandum is in two parts. Any person who intends to establish a

micro, small or medium enterprise engaged in providing or rendering of services

may file or those who want to establish medium enterprise engaged in theproduction or manufacture of products shall file Part 1 of the Entrepreneurs

Memorandum to District Industries Centre.

Once the above enterprises start production or start providing or rendering

services, they should file Part II of the Entrepreneurs Memorandum to District

Industries Centre.

In case of non-filing of Part II of the Entrepreneurs Memorandum within two years

of the filing of Part I, the Memorandum (Part I) filed by the entrepreneur will

become invalid.


41/67

.39.

In case of change in the investment in plant and machinery or in equipment, the

enterprises who have already filed Entrepreneurs Memorandum should inform the

District Industries Centre of the same in writing within one month of the change in

investment.

In case of change of products and that of services or addition in products or

services, the enterprises who have already filed Entrepreneurs Memorandum

should inform the District Industries Centre of the same in writing within one

month of the change.

The District Industries Centre shall, in addition of keeping a record, in writing, shall

also maintain records electronically on computer.

The following form basis of evaluation:

The unit has obtained all necessary clearances whether statutory or administrative.

e.g. drug license under drug control order, NOC from Pollution Control Board, if

required etc.

Unit does not violate any location restrictions in force, at the time of evaluation.

Value of plant and machinery is within prescribed limits.

Unit is not owned, controlled or subsidiary of any other industrial undertaking as

per notification.

APPROVALS:

Each Micro, Small or Medium unit has to comply with various regulations in force.

These include regulatory, taxation, environmental and certain product specific

clearances. This section looks into the methodology of obtaining these approvals

and clearances.

Exemption from Compulsory Licence

Licensing in the Industries sector is governed by the licensing exemption

notification issued by Govt. of India in July 25 1991 under the Industries

(Development and Regulation) Act, 1951. In SSI, there are virtually no licensing

restrictions. No industrial license is required except in case of 6 product groups

included in compulsory licensing (these products groups mainly cover products that

can only be made in large sector.)

But if a small-scale unit employs less than 50/100 workers with/without power

then it would not require a license from the Govt. of India even for the 6 product

groups covered in licensing under Schedule II of the notification.


42/67

.40.

Subject to this, an entrepreneur can set up a Micro, Small or Medium unit

anywhere in the country without any restriction. The units are, of course, subject

to the location/land use and zoning restrictions in force under the local laws.

(Please see link: dcmsme.gov.in for more information)

CLEARANCES:

An entrepreneur has to obtain several clearances or permissions depending upon

the nature of his unit and products manufactured.

Product

Product Specific Clearances

Environment & Pollution Related Clearances

Regulatory or Taxation Clearances

Registration under Sales Tax Act-Commercial Tax Officer of the Area

concerned

Registration under Central Excise Act- Collector of Central Excise or his

Nominee for the area

Payment of Income Tax Act- ITO of the Area concerned

Registration od Partnership Deed-Inspector General of Area concerned

Calibration of weights & measures- Weights & Measures Inspector of

State.

Power Connection-Designated Officer of State Electricity Board

More than 10 Employees with Power connection or 20 employees without

Power connection-Chief Inspector of Factories.

Environment & Pollution Related Clearances

The method of granting consent under water and air pollution to SSI units has

been simplified. Except for 17 critically polluting sectors given below, in all other

cases SSI units will merely have to file an application and obtain an

acknowledgement which will serve the purpose of consent:-

Fertilizer (Nitrogen\Phosphate, Sugar, Cement, Fermentation & distillery,

Aluminum, Petrochemicals, Thermal Power, Oil Refinery, Sulphuric Acid, Tanneries,

Copper smelter, Zinc smelter, Iron & Steel, Pulp & Paper, Dyes & Dyes

Intermediates, Pesticides manufacturing & Formulation, Basic Drugs &

Pharmaceuticals.
http://www.dcmsme.gov.in/howtosetup/clearances.htm#prodhttp://www.dcmsme.gov.in/howtosetup/clearances.htm#Envihttp://www.dcmsme.gov.in/howtosetup/clearances.htm#Envihttp://www.dcmsme.gov.in/howtosetup/clearances.htm#prod


43/67

.41.

Product Specific Clearances:

Establishing a Printing Press - District Magistrate

License for Cold Storage Construction - Designated Official in State

Pesticides - Central/State Agricultural Department - Ministry of

Agriculture

Drugs and Pharmaceuticals - Drug license from State Drug Controller

Safety Matches/ Fireworks - License under Explosives Act from

Directorate of Explosives, Nagpur

Household Electrical Appliances - License from Bureau of Indian Standards

Wood Working Industry within 8 km from forest - District Forest Officer

Milk Processing & Milk products manufacturing units - Approval under Milk

and Milk Products Order from State Agricultural/ Food Processing

Industries Department above a designated capacity.

Quality Certification:

ISO 9000 Certification:

Quality certification has become extremely important in competitive markets and

especially in gaining foothold in exports. To avail the certification of ISO-9000, aunit has to undertake significant costs; the small scale industries have been foundwanting mainly on account of resource crunch to implement quality systems toobtain this certification. However, as a paradigm shift, SSI must make 'Quality' away of life.

It has been decided to push the quality up gradation programme in the SSI Sectorin a big way.

A scheme has been launched to give financial incentive to those SSI units whoacquire ISO-9000 certification, by reimbursing 75% of their costs of obtaining

certification, subject to a maximum of Rs. 0.75 lacs per unit.

In order to promote modernisation and technology upgradation in Micro & Smallunits are assisted in improving the quality of their products.

A new scheme has been launched to assist Micro & Small units in obtaining ISO-9000 or an equivalent international quality standard. Subject to an upper ceiling ofRs. 075 lacs, each unit is given financial assistance equal to 75% of the costsincurred in acquiring the quality standard.

The Micro & Small units are also encouraged to participate in quality awarenessand learning programmes organised specially for their benefit.

***


44/67

STATE INDUSTRIAL PROFILE

OFDIU [ 2015-16 ]

Prepared by :

P.L.SHAHASSTT. DIRECTOR (STATISTICS)

MSME DEVELOPMENT INSTITUTEGovt. of India

Ministry of Micro, Small & Medium EnterprisesHarsiddh Chambers, 4thFloor,

Ashram Road, Ahmedabad-380 014Tel.No. 079-27543147 & 27544248

E-mail :[email protected]:www.msmediahmedabad.gov.in

Udyami Help Line : 1800-180-6763 (Toll Free)
mailto:[email protected]://www.msmediahmedabad.gov.in/http://www.msmediahmedabad.gov.in/mailto:[email protected]


45/67

CONTENTS

S No. Topic Page No

1 General Characteristics of the District1-21.1 Location & Geographical Area

1.2 Topography

1.3 Availability of Minerals 2-3

1.4 Forest

1.5 Administrative set up

4-72. District at a glance

2.1 Existing Status of Industrial Area

8-103. Industrial Scenario


3.2 Year wise Trend of Units Registered3.3 Details of Existing Micro & Small Enterprises & Artisan Units 11

3.4 Large Scale Industries/Public Sector undertakings

11-14

3.5 Major Exportable items

3.6 Growth Trend

3.7 Vendorisation/Ancillarisation of the Industry


3.8.1 List of the units

3.8.2 Major Exportable item

3.9 Service Enterprises

3.9.2 Potential areas for service industry

3.10 Potential for new MSMEs

4. Existing Clusters of Micro & Small Enterprise

4.1 Detail of Major Clusters

4.1.1 Manufacturing Sector

4.1.2 Service Sector

4.2 Details of Identified cluster

4.2.1 Welding Electrodes

14

4.2.2 Stone Cluster

4.2.3 Chemical Cluster4.2.4 Fabrication and General Engg. Cluster

5. General issues raised by industry association

15-166. Development Programmes of the District

7. Steps to set up MSMEs 17-19

8. Additional information 20-21


46/67


47/67

1

BRIEF INDUSTRIAL PROFILE OF DIU (UT)DISTRICT

1. General Characteristics of the District

1.1 Location & Geographical Area :

Union Territory Diu, a former Portuguese enclaves, is steeped in history, was

a sea-port and naval base of considerable strategic importance from the 14 th

to 16th centuries. It was also a vital trade link with the rest of India for

traders overseas.

Union Territory of Daman and Diu comprises two districts namely Diu and

Daman. Both districts are situated on western coast of India at a distance of

about 700 KMs. Daman is the HQ of this Union Territory. Daman is on mainland near southern portion of Gujarat State. Vapi is the nearest Railway

station (13 KMs) which is on Western Railway between Mumbai and Surat.

Vapi is 167 KMs from Mumbai Central and 95 KMs from Surat.

Union Territory of Diu is an island near Una of Gir Somnath District in

Gujarat State. It is located between the parallels 20o 44 34 and 20o42

00 North of latitude and between the meridians 71o 0024 and 70o 52 26

East of longitude East of Greenwich. It is covering an area of 40.00 Sq.KM.

Nearest railway station is Delwada at a distance of 9 KMs from Diu on meter

gauge. But important trains are linked with Veraval which is 90 KMs from

Diu on broad gauge.

1.2 Topography :

The total length of the Coastal Region of the district is 21 KMs. Its length

from the Extremes north and south, measures 4.6 KMs and width from east

to west measures 13.8 KMs. The altitude is 6 meters above the sea level.

The land scape of this region is generally plain. The maximum heights ofhillocks of the district are about 30 meters above the sea level. Diu District

is straddled by the chasi river on the north separating it from Junagadh and

Amreli district of Gujarat state and the Arabian sea on the its remaining

three sides.


48/67

2

The climate of the region is pleasant throughout the year October to March

is the best season to visit Diu. The maximum temp. is 37 degree C and

minimum temp. is 11 degree C. The annual rainfall recorded during last 7

(seven) years is as follows:

Year MM

2004 4402005

885

2006 7292007 1212

2008

13672009

1489

2010 15682011 900

2012

6352013 919

2014 924

1.3 PRODUCTION OF MINERALS DURING 2013-14 & 2014-2015

Sr.

No.

Name of the minerals

Major Minerals

PRODUCTION (IN

MTM. T)

2013-2014

PRODUCTION

(IN M. T)

2014-2015

01. Fireclay Nil Nil

02. Chalk Nil Nil


04. Prelate Nil Nil

05. Silica sand Nil Nil

Name of the minerals

Minor Minerals

PRODUCTION (IN

M. T)

2013-2014

PRODUCTION

(IN M. T)

2014-2015

01. Black trap Nil Nil

02. Ordinary Sand Nil Nil

03. Ordinary Clay Nil Nil


05. Sandstone Nil Nil


49/67

3

06. Red Clay Nil Nil

07. Dolomite Nil Nil

08. Hard Murram Nil Nil

08 Soft Murram Nil Nil

09 Gravel Murram Nil Nil

1.4 FOREST:

Diu District has been constituted as a Forest Range under Daman & DiuForest Division. It has 516.70 Ha. of Proposed Reserved Forest and 219 Ha.

of Bird Sanctuary at Fudam.

The forests in Diu are maintained with sole objectives of environmental

protection. Plantations, raised on coastal stretches, are very instrumental inarresting coastal erosions. The man made wood lots have sheltered several

species of wild animals. The mangrove scrubs in the Fudam Bird Sanctuaryforms the spawning grounds for fishes and provides feeding grounds for

several species of vai fauna.

The department undertakes plantation activities on every possible site. The

seedlings of different forest species, raised in the Forest Nursery, aredistributed at free of cost among the individuals, institutions, organizations,etc.

Forest Department is mandated to protect the green wealth of Diu through

peoples participation and by enforcing various Acts & Rules. Variousparticipatory & awareness programmes are being organized to mobilize the

mass support to surge ahead with the departmental objectives.

Moderate dense : 154.00 hectare

Open Forest : 362.70 hectareTotal: 516.70 hectare

Bird Sanctuary : 218.57 hectare


50/67

4

1.5 Administrative set up:

A union territory with the Administrator (common to Daman and Dadra Nagar

Haveli) as the head of the administration assisted by the Collector. The Lok Sabha

seat is common with Daman and this UT has no legislative.

2. District at a Glance :

Sr.

No.

Particular Year Unit Statistics

1 Geographical features

(A) Geographical Data

i) Latitude 2015 Degree Between 20o 4434

& 20o 42 00 N

ii) Longitude 2015 Degree Between 71o 00

24 & 70o 52 26 E

iii) Geographical Area 2015 Hectare 4000

(B) Administrative Units: Common District Panchayat of Daman &

Diu 01i) Sub divisions 2015 No. 01

ii) Tehsils 2015 No. 01

iii) Sub-Tehsils 2015 No. 01

iv) Patwar Circle 2015 No. 01

v) Panchayat Simitis 2015 No. 04

vi) Nagar Nigam 2015 No. --

vii) Nagar Palika 2015 No. 01

viii) Gram Panchayat 2015 No. 04

ix) Revenue villages 2015 No. 04x) Urban Wards 2015 No. 13

xi) Assembly Area 2015 No. Common

Parliamentary

Constituency exists

for Daman & Diu.


51/67

5

2. Population

(A) Sex-wise Total: No. 52074

i) male 2011 No. 25642

ii) Female 2011 No. 26432

(B) i) Rural Population 2011 No. 28083

ii) Urban Population 2011 No. 23991

(C ) Literacy Rate 2011 % 83.46

Male 2011 % 91.21

Female 2011 % 76.06

(D) SC Population 2011 No. 1862

ST Population 2011 No. 123

3. Agriculture

Land utilization

i) Total Area under

cultivation

2014-15 Hectare 705.00.00

ii) Forest cover 2014-15 Hectare 458.94.50

iii) Non Agriculture Land

( uncultivated land)

2014-15 Hectare 586.05.02

iv) Cultivable Barren land 2014-15 Hectare 432.08.00

V) Area under irrigation 2014-15 Hectare 273.05.02

4.

Forest(i) Proposed Forest Area 2014-15 Hectare 516.70

5. Livestock & Poultry

(A) Cattle

i) Cows 2012 Nos. 1153

ii) Buffaloes 2012 Nos. 16

(B) Other livestock

i) Goats 2012 Nos. 2033ii) Duck 2012 Nos. 467

iii) Dogs & Bitches 2012 Nos. 107

iv) Poultry (Birds) 2012 Nos. 7850

V) Turkey 2012 Nos. 4

vi) Rabbit 2012 Nos. 4


52/67

6

iv) Railways: There is no Railway Line in Diu district. Nearest

Railway station is Delwada at 9 KM distance from Diu on meter

gauge and Veraval at 90 KM on broad gauge.

i) Length of rail line 2014-15 KMs 0

V) Roads:

a) National Highway 2014-15 KMs 11.50

b) State Highway 2014-15 KMs 0

c) Main District Road 2014-15 KMs 20.34

d) Other district & Rural

Roads

2014-15 KMs 09.58

e) Rural Road/ Agriculture

marketing Board

Roads

2014-15 KMs 16.47

23.42

f) Kachcha Road 2014-15 KMs 5.00

VI) Communication

a) Telephone connection 2014-15 Nos. 2564

b) Post Offices 2014-15 Nos. 4 (main) +

2(branch)

c) Telephone Centres 2014-15 Nos. 04

d) Density of Telephone 2014-15 Nos./1000

person

85.80

e) Density of telephone 2014-15 No/Sq. Km 87.80

f) TOTAL PCO 2014-15 No 16

g) Mobile (BSNL) 2014-15 No. 4950 (Approx.)

h) T.V. Relay Station 2014-15 No. 01

(VII) Public Health

a) Allopathic Hospital 2014-15 No. 01

b) Beds in AllopathicHospital

2014-15 Beds 40

c) Ayurvedic hospital 2014-15 --

d) Beds in Ayurvedic

hospitals

2014-15 --

e) Unani hospitals 2014-15 --

f) Community health

centers

2014-15 No. 01


53/67

7

g) Beds in C H C 2014-15 No. 20

h) Primary health centers 2014-15 No. 01

i) Beds in P H C 2014-15 No. 06

j) Dispensaries 2014-15 Nil

k) Sub health centers 2014-15 No. 06

l) Private hospitals 2014-15 NIL

(VIII) Banking

Commercial

a) Commercial Bank 2014-15 No. 14

b) Co-operative banks 2014-15 No 04

c) Total ATMs of All

banks.

2014-15 No 14

d) Co-operative

Societies

2014-15 No. 47

e) PLDB Branches 2014-15 --

(IX) Educationa) Pre-primary School 2014-15 No. 14

b) Primary school 2014-15 No. 27

c) Middle schools 2014-15 No. 17

d) Secondary & seniorsecondary schools

2014-15 No. Secondary School:07

06 Govt.01 Govt. Aided

Senior Secondary

School:0805 Govt.02

KendriyaVidyalaya

01 self financed

d) Colleges 2014-15 01

e) Technical University 2014-15 NIL

Technical Training Institute - 1 at Diu Industrial Training Institute - 1 at Ghoghla

Government Polytechnic - 1 at Diu


54/67

8

2.1 Existing Status of Industrial Areas in the District Diu

Sr.No.

Nameof

Ind.Area

Landacquir

ed (inhectar

e)

Landdevelop

ed (inhectare

)

Prevailing rate

per Sq.Mt.

(inRs.)

No.of

plots

No.of

allotted

plots

No.of

vacant

plots

No. of unitsin

productionAs on

30.06.2015

1. DiuIndustrial

Estate

11.064 11.064 *Rs.2000/-Per Sq.

Mt.

52Nos.

52Nos.

Nil 05

Remarks: Govt. has transferred the land on lease basis and lease period expiredon 29/07/2012.

* Rate Rs. 2000/-Per Sq. Mt. was in force up to 31/12/2014. The revised

rate of land applicable to Diu Industrial Estate effective from 01/01/2015 yetnot decided by Corporation.

3. INDUSTRIAL SCENERIO OF DIU :

MSME Act 2006 :

Since the land is limited , industry provides alternative activities for economic

development of the district. The district administration is attracting new

entrepreneurs through various benefits of cash subsidy, tax exemptions

concessional rates of interest and other liberalized terms and conditions. This has

provided very good opportunities for industrialization of the district.

The New MSME Act -2006 came in to force from 0.2.10.2006 by central

Government. The earlier concept of Industries has been changed to Enterprises.

Enterprise have been classified broadly in to :

(a)

Manufacturing Units

(b) Service Sector Units

Manufacturing Enterprises have been defined in 3 categories in terms of their

Investment in Plant & Machinery (excluding Land & Building).


55/67

9

Sr No. Category-Type of Units Investment in Plant & Machinery

1. Micro Enterprise Up to Rs. 25 Lacs

2. Small Enterprise More than Rs.25 Lacs & up to Rs. 5 Crore

3. Medium Enterprise More than Rs.5 Crore & up to Rs. 10 Crore

Service Enterprises have been defined in 3 categories in terms of their Investment

in equipment (excluding Land & Building).

Sr No. Category-Type of Units Investment Equipment

1. Micro Enterprise Up to Rs. 10 Lacs

2. Small Enterprise More than Rs.10 Lacs & up to Rs. 2 Crore

3. Medium Enterprise More than Rs.2 Crore & up to Rs. 5 Crore

There is no any Micro, Small and medium Units in the UT of Diu as per MSME Act,2010.


Sr.

No.

Head Unit Particulars

Provisional Permanent

1. Registered industrial unit No. 192 38

2. Total Industrial unit No. 192 38

3. Registered Medium & large unit No. NIL NIL

4. Estimated Avg. No. Of daily worker

employed in small scale industries

No. 07

5. Employment in large and medium

industries

No. NIL

6. No. of Industrial area No. 01

7. Turnover of small scale industries In crores NA

8. Turnover of medium & large scale

industries

In lacks NIL


56/67

10

3.2 YEAR WISE TREND OF UNITS REGISTERED

Year No. of Regd. Units Employment Investment

(Lakh Rs.)Provi. Pmt.

UP

TO

1992-93 121 01 25 17.13

1993-94 19 03 23 30.18

1994-95 05 02 13 20.97

1995-96 06 02 23 24.29

1996-97 00 05 80 177.89

1997-98 06 09 134 32.94

1998-99 02 02 15 17.701999-2000 02 03 24 25.35

2000-01 00 00 00 00.00

2001-02 03 00 00 00.00

2002-03 01 01 01 01.09

2003-04 04. 01 05 10.35

2004-05 00 02 09 37.78

2005-06 04 01 20 97.00

2006-07 09 02 14 23.61

2007-08 04 00 00 00.00

2008-09 03 01 51 78.52

2009-10 02 02 20 47.34

2010-11 01 01 06 78.99

2011-12 02 00 00 00

2012-13 01 00 10 34.50

2013-14 00 00 00 00

TOTAL : 195 38 473 755.63


57/67

11

3.3 DETAILS OF EXISTING MICRO & SMALL ENTERPRISES AND

ARTISAN UNITS IN THE DISTRICT

Sr.

No.

Type of Industry No. of

Units20 Agro based 01

22 Soda Water 03

23 Cotton textile --

24. Woolen, silk & artificial thread

based clothes

--

25 Jute & Jute based --

26 Ready-made garments &

embroidery

--

27. Wood/Wooden based furniture --28. Paper & Paper products --

29. Leather based --

30 Chemical/Chemical based 02

31. Rubber, Plastic & Petro based 03

32. Mineral based --

33. Metal based (Steel Fabrication) --

35. Engineering units 01

36. Electrical machinery & transport

equipment

--

97. Repairing & Servicing 01

01. Others:

1. Ice & Ice blocks making 19

2. Ice and Cold storage 04

3. Frozen fish activities unit 04

TOTAL : 38

The data of Employment & Investment is not available with Block

Development Officer.3.4 Large Scale Industries / Public Sector undertakingsNil

3.5 Major Exportable item:Since Diu is geographically an Inland area, itis restricted area looking at the pollution control to maintain the

ecology; there is no greater chances of exportable manufacturedindustrial goods. Hence, there are only marine fisheries and other sea

food items are having export oriented items.


58/67

12

3.6 Growth Trend :

Fisheries and sea food industries have ample scope of growth.

Tourism & Hotel industries are also growing in UT of DIU

3.7 Vendorisation / Ancillarisation of the Industry: Since Diu is

geographically an Inland area, it is restricted area looking at the

pollution control to maintain the ecology; there is no greater chancesof exportable manufactured industrial goods. Hence, there are only

marine fisheries and other sea food items are having export orienteditems.


Nil3.8.1 List of the Units in Diu & near by area NIL

3.8.2 Major Exportable items - NIL

3.9 Service Enterprises:(i) Hotels and Lodges

(ii) Gold Smith(iii) Designing on Acrylic Bangles

3.9.1Coaching Industry NIL

3

Documents

State Industrial Rrofil